The microbiome is critical to the function of higher organisms and the gastrointestinal microbiome in chief among them. We do not know what impact the spaceflight GI microbiome has on organismal health in the absence of other confounding factors. We used a fecal transplant model to address this question and we found that we can recapitulate some of the functional aspects of the spaceflight microbiome on the ground but the impact on organismal health was ambiguous showing neither a defined improvement nor a impairment to lymph transport, growth, or immune populations. Histidine treatment was able to alter some of the functional aspects of the microbiome. Overall it we can conclude that the spaceflight microbiome is not pathological but has distinct impacts on organismal health.

Modeling the flow of polymer solutions requires knowledge at various length and time scales. The macroscopic behavior is described by the overall velocity, pressure and stress. The polymeric contribution to the stress requires knowledge of the evolution of polymer chains. In this work, we use a microscopic model, the finitely extensible nonlinear elastic (FENE) model, to capture the polymer behavior. The benefit of microscopic models is they remain faithful to the polymer dynamics without information loss via averaging. The downside is the computational cost needed to solve the thousands to millions of differential equations describing the microstructure. We thus describe a multiscale flow solver that utilizes GPUs for massively parallel, efficient simulations. We compare and contrast the microscopic model with its macroscopic counterpart under various flow conditions. In particular, significant differences are observed under nonlinear flow conditions, where the polymers become highly stretched and oriented.

This paper provides a comparative study between microwave tomography and synthetic time-reversal imaging techniques as applied to ground penetrating radar (GPR) surveys. The comparison is carried out by processing experimental data collected at a controlled test site, with various types of buried targets at given subsurface depths and representative soil conditions. It is shown that the two techniques allow us to obtain complementary information about position, depth and size of the targets from a single GPR survey.

With the breakthrough of modernism, various efforts are undertaken to rationalize architecture and building processes using industrial principles. Few architects explore these as intensively as Walter Gropius, the founder of the Bauhaus. Even before World War One, and increasingly in the interwar years, Gropius and a number of colleagues undertake various experiments which manifest in a series of projects, essays, model houses and Siedlungen. These aim at conceptually different goals, i.e. they follow two different categories of industrial logic: first, a flexible construction kit and, second, an assembly line serial production. This article traces the genesis of these two concepts and analyses their characteristics using these early manifestations. Compared to existing literature, this article takes into account hitherto neglected primary sources as well as technological and construction history aspects—allowing for a distinction based not only on theoretical, but also technological and structural characteristics. This article shows that Gropius succeeds in formulating and exploring the two principles in theory and practice as well as drawing conclusions by the end of the 1920s. With them, he contributed significantly to the rationalization of architecture, and his principles have been picked up and developed further by numerous architects since then.

This study have uniquely mad use of Box-Jenkins ARIMA models to address the core of the threes objectives set out in view of the focus to add meaningful value to knowledge exploration. The outcome of the research have testify the achievements of this through successful nine months out-of-sample forecasts produced from the program codes, with indicating best model choices from the empirical estimation. In addition, the results also provide description of risks produced from the uncertainty Fan Chart, which clearly outlined possible downside and upside risks to tourist visitations in the country. In the conclusion, it was suggested that downside risks to the low level tourist arrival can be managed through collaboration between authorities concerned with the management of tourist arrivals in the country.

This study aimed to investigate the impact of incorporating indium tin oxide (ITO) nan particles (NPs) with zinc oxide (ZnO) NPs into flexible dye-sensitized solar cells (FDSSCs). ZnO and ITO NPs were separately prepared using the sol-gel method, followed by hybridization of ZnO NP/ITO NP and characterization using techniques such as TEM, SEM, XRD, UV-Vis spectros-copy, PL spectroscopy and cyclic voltammetry (CV). TEM analysis showed hexagonal struc-tures and small sphere-like nanoparticles with mean diameters of 15.22 ± 11 nm for ZnO NPs and 14.54 ± 16 nm for ZnO NPs/ITO NPs. SEM images revealed uniform dispersion and smooth surface morphology, while XRD confirmed the crystalline nature of both ZnO and hybrid NPs, indicating specific crystallographic planes with consistent sizes. UV-Vis spectroscopy demonstrated a redshift in wavelength upon adding ITO NPs, suggesting an impact on the bandgap of ZnO NPs. PL spectra exhibited a broad visible emission peak at 535 nm. These findings enhance our understanding of the optical behavior and interaction between ITO and ZnO NPs in hybrid nanostructures. The study concluded that the ITO NPs improve FDSSC performance by enhancing charge separation and transport, leading to increased photocurrent production, with the characterization techniques providing valuable insights for future research and applications.

IgY antibodies are found in the blood and yolk of eggs. Several studies show the feasibility of utilising IgY for immunotherapy and immunodiagnosis. These antibodies have been studied because they fulfil the current needs for reducing, replacing, and improving the use of animals. Affinity and avidity represent the strength of the antigen-antibody interaction and directly influence antibody action. The aim of this review was to examine the factors that influence the affinity and avidity of IgY antibodies and the methodologies used to determine these variables. In birds, there are few studies on the maturation of antibody affinity and avidity and these studies suggest that the use of an adjuvant, type of antigen, strain of the animal, number of immunisations, and time interfere with the affinity and avidity of IgY antibodies. Regarding the methodologies, most studies use chaotropic agents to determine the avidity index. Studies involving solution phase and equilibrium titration reactions are also described. These results demonstrate the need for standardisation of methodologies for determination of affinity and avidity so that further studies can be performed to optimise the production of high avidity IgY antibodies.

Abstract: Circumcision is a long-standing and frequently performed surgical procedure which holds significant cultural significance among AmaXhosa people in South Africa. Due to cultural reasons in some parts of Africa, the integration of medical male circumcision with traditional manhood initiation rituals still lacks acceptance. This study examined the level of knowledge and acceptance of voluntary male medical circumcision (VMMC) among young males in a selected high school in the Nyandeni District of the Eastern Cape Province, South Africa. A descriptive, quantitative, cross-sectional study was conducted, and a self-administered questionnaire was used to obtain information on sociodemographic characteristics, knowledge of VMMC, percep-tions of VMMC, and circumcision practices. One Hundred participants were recruited from both grades 11 and 12, and 82% of the participants indicated that they had received information about VMMC. Most of the respondents (88%) preferred traditional male circumcision (TMC) and only 12% of respondents preferred VMMC. The participants displayed a good understanding of the distinction between VMMC and TMC. However, results from the study showed that most re-spondents exhibited low acceptability towards VMMC. These findings highlight the need to develop evidence-based strategies to enhance learners’ knowledge and acceptance of VMMC.

The utilization of black mulberry fruit as a precursor for C-dot synthesis represents a novel ap-proach to biosynthesizing C-dots. Through the implementation of a hydrothermal autoclave, we successfully produced C-dots using the fruit extract. This environmentally conscious and sustain-able method of synthesis presents a promising avenue for C-dot production. Our findings demon-strate the remarkable photocatalytic activity of the C-dots, as evidenced by their effective degra-dation of pollutants under visible light irradiation. This discovery holds significant implications for addressing water contamination issues and promoting environmental remediation efforts. Fur-thermore, we conducted a thorough investigation to determine the optimal doping concentration of C-dots, ultimately identifying 0.2 M as the ideal concentration. At this specific concentration, the photo catalytic degradation of pollutants reached an impressive rate of 95.8%. The enhanced photocatalytic activity can be attributed to the increased electron trapping resulting from the presence of additional surface sites and the absorption of different wavelengths of light. In sum-mary, this research contributes to the sustainable synthesis of carbon dots using black mulberry fruits as a precursor, while also providing a comprehensive analysis of their optical and photo-catalytic properties.

Biosynthesis of C-dots using black mulberry fruit as a precursor for C-dot synthesis is a novel approach. We successfully synthesized C-dots from the fruit extract by employing a hydrothermal autoclave. This green synthesis method offers a sustainable and environmentally friendly route for C-dot production. Our results demonstrate the efficient degradation of pollutants under visible light irradiation, indicating the strong photocatalytic activity of the C-dots. This finding has implications for environmental remediation and the elimination of harmful substances, showcasing the potential practical applications of C-dots in addressing water contamination issues. We made an effort to identify the optimum doping concentration of C-dots and found that 0.2 mol% was the sweet spot. At this concentration, the photodegradation of pollutants reached an impressive 95.8%. The enhanced photocatalytic activity can be attributed to increased electron trapping due to more surface sites and different absorption wavelengths. This work contributes to the synthesis of carbon dots using black mulberry fruits as a sustainable precursor, as well as the comprehensive analysis of their optical and photocatalytic properties.

Nanotechnology sparks discussions and concerns about the impacts of new nanomaterials on health and the environment. It holds importance in various domains due to its unique struc-tures. Carbon dots (C-dots) are versatile nanomaterials with applications in bioimaging, sensing, catalysis, polymers, solar cells, and more. They offer desirable characteristics such as stability, cost-effectiveness, biocompatibility, and high photoluminescent quantum yield. C-dots have the potential to replace expensive fluorophores in solar cells. They are catego-rized as carbon quantum dots, graphene quantum dots, and carbonized polymer dots. C-dots have outstanding optical and photoelectric properties with low toxicity. Bottom-up and top-down approaches are used for the synthesis of carbon dots (CDs), with each method im-pacting their physicochemical characteristics. The choice of synthesis method depends on de-sired properties and application requirements. Researchers combine these methods and ex-plore new approaches to enhance synthesis efficiency and tailor CD properties. CDs have di-verse chemical structures with modified oxygen, polymer-based, or amino groups on their surface. Various characterization methods such as HRTEM, XPS, and optical analysis (PL, UV) are used to determine CD structure. Carbon dots (CDs) are cutting-edge fluorescent nano-materials with remarkable qualities such as biocompatibility, low toxicity, environmental friendliness, high water solubility, and photo-stability. They are easily adjustable in terms of their optical properties, making them highly versatile in various fields. CDs find applications in bio-imaging, nanomedicine, drug delivery, solar cells, LEDs, photo-catalysis, elec-tro-catalysis, and other related areas.

Recombinant laboratory plasmids (RLPs) are common in biological research and freely shared among academic research laboratories (ARLs), a practice required by many research funding agencies. However, the generation of accurate, reproducible results in experiments utilizing RLPs can be hampered by a lack of accompanying sequence information and metadata. This culture of RLP sharing without knowledge of sequence or etiology is accepted by publishers, not regulated by governments, and outside the realm of bio-industry. In addition, no centralized infrastructure currently exists to collate such data, which at the moment is fragmented across companies, non-profits, and governments and thus is not easily accessed or enacted toward threat assessment. The ubiquity, free exchange, and dual-use risk of RLPs exemplifies a biosecurity threat and elevates the need to characterize their composition to facilitate improved biorisk management by the academic community. A number of common sense solutions are available to create a culture that addresses the biosecurity gap posed by RLP sharing. Culture shift in RLP management will require new norms, effective data management for collation of RLP sequences and metadata, and an incentive structure that encourages sequencing by stakeholders. The next generation of researchers must initiate and champion this shift with support from funding agencies and endorsement from governments and international organizations. Coordination of efforts and stakeholders will require international public/private collaboration, a structure that will be critical to ensure widespread utility as well as the ability of lower-resourced partners to participate, contribute, and benefit.

Enterococcus faecalis is a growing cause of nosocomial and antibiotic-resistant infections. Treating drug-resistant E. faecalis requires novel approaches. The use of bacteriophages (phages) against multidrug-resistant (MDR) bacteria has recently garnered global attention. Biofilms play a vital role in E. faecalis pathogenesis as they enhance antibiotic resistance. Phages eliminate biofilms by producing lytic enzymes, including depolymerases. In this study, Enterococcus phage vB_Efs8_KEN04 (ФKEN04), isolated from a sewage treatment plant in Nairobi, Kenya, was tested against clinical strains of MDR Enterococcus faecalis. This phage had a broad host range against 100% (26/26) of MDR E. faecalis clinical isolates and cross-species activity against Enterococcus faecium. It was able to withstand acidic and alkaline conditions, from pH 3 to 11, as well as temperatures between -80ᵒC and 37ᵒC. It could inhibit and disrupt the biofilms of MDR E. faecalis. Its linear double-stranded DNA genome of 142,402 bp contains 238 coding sequences with a G+C content and coding gene density of 36.01% and 91.46%, respectively. Genomic analyses showed that ФKEN04 belongs to the genus Kochikohdavirus in the family Herelleviridae. It lacked antimicrobial resistance, virulence, and lysogeny genes, and its stability, broad host range, and cross-species lysis indicate strong potential for the treatment of Enterococcus infections.

In the present work, a portable device system applied in the detection and classification of different metallic ions was proposed and developed, aiming at its application in the monitoring of hydrological systems like rivers, lakes and groundwater. Considering the system features, a portable colorimetric system was developed by using a multispectral optoelectronic sensor. All the technology of quantification and classification of metallic ions using Optoelectronic Multispectral sensors was fully integrated in the embedded hardware FPGA technology and software based on virtual Instrumentation (NI LabView ®). The system was used as a colorimeter by using the chromogen reagent of 1-(2-pyridylazo)-2-naphthol (PAN) as an indicator and the results obtained together with the signal processing and pattern analysis using the method of the linear discriminant analysis, allowed to obtain excellent results in detection and classification of Pb(II), Cd(II), Zn(II), Cu(II), Fe(III) and Ni(II) ions, with almost the same level of performance in relation to those obtained from the UV-VIS spectrometers of high spectral resolution.

The effective management of Fusarium wilt of bananas (FW) depends on the knowledge of the disease dynamics in time and space. The objectives of this work were: To estimate disease intensity and impact, and to investigate the spatial and temporal dynamic of FW. Fields planted with Silk (n = 10), Pome (n = 17) or Cavendish (n = 3) banana subgroups were surveyed in Brazil, totaling 95 ha. In each field, all plants were visually assessed and diseased plants were georeferenced. The incidence of FW and the impact of the disease on yield on a regional scale were estimated. Spatial patterns were analyzed using quadrat- and distance-based methods. FW incidence ranged from 0.09 to 41.42%, being higher in Silk fields (median = 14.26%). Impacts of epidemics on yield ranged from 18.4 to 8,192.5 kg.ha-1.year-1, with a median of 935.2 kg.ha-1.year-1. The higher economic impact of the disease was observed on Silk cultivar with a median loss of US$ 910.5 ha-1.year-1. Overall, estimated losses increased on average by US$ 109.8 ha-1.year-1 at each 1% of incidence. Aggregation of FW was detected by all analytical methods in 13 fields (1 of Cavendish, 11 of Pome and 1 of Silk). In the other 17 fields, at least one analytical method did not reject the null hypothesis of randomness. One field (5 ha), composed of six plots, was selected for spatial and temporal studies during two years with bi-monthly assessments. A sigmoidal curve represented the FW progress and the Gompertz model best fitted disease progress. The level of aggregation varied over time, and evidence of secondary infection to neighboring and distant plants were detected. FW is a widespread problem in Brazil and yield losses can be of high magnitude. Epidemiology-based management strategies can now be better established.

Mango (Mangifera indica L.) is an allotetraploid (2n = 4X= 40) drupe fruit and has high nutritional value belongs to genus Mangifera and family Anacardiaceae. Mango cultivars are used with worldwide acceptance to pharmacological, ethnomedical, and phytochemical industries. Assessment of the genetic distinctiveness of a cultivar through morphological descriptors is an important tool for both the registration and the protection. New mango genotypes have been improved using valuable diverse germplasm resources to ensure food security. DNA fingerprinting based simple sequence repeats (SSR)-markers have been the most broadly used, effective and accurate in evaluation of genetic characterization of a cultivar. Molecular breeding is an effective source of genetic gain after improvement of fruit trees using marker assisted genomic selection. Total genomic DNA (gDNA) was generated using CTAB method from each cultivar. The most effective 50 hyper-variable SSR markers were selected. Highly specific DNA fingerprints were identified in the candidate line ‘Azeem Chaunsa’ compared with three standard cultivars using SSR-PCR. An agglomerative hierarchical clustering method was used to construct dendrogram based on the UPGMA clustering method. Cultivar identification diagram (CID) was constructed to evaluate association among standard cultivars and Azeem Chaunsa. Our results showed that SSR markers could efficiently assess genetic diversity in mango. The genetic similarity coefficients were recorded between the cultivars of mango ranged from 0.49 to 0.67. CID results concluded that cultivar ‘Azeem Chaunsa’ varied significantly from the check cultivar, Sindhri (46.2%), S.B Chaunsa (45%) and Sufaid Chaunsa (46.7%). The results obtained in this study will orient cultivar identification strategies for a successful future.

The cumulative nature of knowledge in science in general and for social science in particular depends on research being conducted with integrity, with fraudulent research being one of the most harmful of questionable research practices. It has been observed that, in fabricated research, there is often a deficit of zeroes in the last digits of regression results. In research, authored by Dr. Eric A. Stewart, that has been retracted, there appears to have been a paucity of zeroes as last digits in his regression results. Eight hypotheses were tested to re-examine the relative lack of zeroes and possible increases in ones or nines as last digits. Some support was found for all hypotheses. It appears that in Stewart’s retracted research, ones and nines were substituted for zeroes as last digits. Furthermore, the increased proportions of ones and nines was found to be highly correlated with other anomalies in the same retracted articles, possibly indicative of fabrication of the results in the retracted articles. Further research in this area might use symbolic interaction theory or justification theory to guide our developing knowledge about this type of questionable research practice.

Epidemiological studies indicate an increased risk of cancer from the consumption of very hot foods and beverages. The International Agency for Research on Cancer (IARC) has already recommended threshold values for the maximum drinking temperature of very hot beverages. The contact time and the contact temperature are decisive for the risk of injury when hot media come into contact with human skin. However, measuring the contact temperature is not easily possible in practice. In the present study, a numerical simulation based on the solution of the heat conduction equation was initially used to investigate whether and for what period of time a constant contact temperature is to be expected under oral conditions. For small circular 3-cm food samples (e.g., cooked potatoes) with 2.5 mm thickness in contact with the tongue, the simulation results in a constant contact temperature of 10 s before cooling. With a thickness of 0.5 mm, the contact temperature is only maintained 1 s. Hot beverages, which spread as a thin film and thereby increase their surface area, can therefore be consumed at higher temperatures than solid foods. Furthermore, a simple test technique with a "measuring spoon" was developed. A hot sample is placed on the tongue. Orientating measurements were used to determine which contact temperature was considered to be just comfortable for any period > 10 s and for which period of less than 10 s it was still just bearable. The contact temperature, which was still perceived as tolerable for periods > 10 s, was 46.5 °C. The time spans for the higher contact temperature 48 °C were between 2 and 4 s and for 49 °C between 1 and 2 s. The course of the contact temperatures determined in the experiment over time allows to calculate the corresponding threshold values of consumption temperatures for various foods. Consumption temperatures of about 56 °C for potatoes and 60 °C for cheese are still perceived as tolerable. In view of the fact that the contact temperature is obviously the determining factor for the risk of injury from burns in the oral cavity in addition to the contact time, it makes sense to reference threshold values to the contact temperature rather than to the surface or consumption temperature of a food product, which is current customary practice. If this contact temperature is defined as a threshold value, the surface or consumption temperature for any other food can be calculated.

Analysis of 1382 measures of battery State of Health (SoH) from 283 Nissan Leafs (“Leaf/s”), manufactured between 2011 and 2017, has detected a faster rate of decline in this measure of energy-holding capacity for 30 kWh variants. At two years of age, the mean rate of decline of SoH of 30 kWh Leafs was 9.9% per annum (95% uncertainty interval of 8.7% to 11.1%; n = 82). This was around three times the rate of decline of 24 kWh Leafs which at two years averaged 3.1% per annum (95% uncertainty interval of 2.9% to 3.3%; n = 201). For both variants there was evidence for an increasing rate of decline as they aged, although this was much more pronounced in the 30 kWh Leafs. Higher use of rapid DC charging was associated with a small decrease in SoH. Additionally, while 24 kWh cars with greater distances travelled showed a higher SoH, in 30 kWh cars there was a reduction in SoH observed in cars that had travelled further. The 30 kWh Leafs sourced from United Kingdom showed slower initial decline than those from Japan, but the rate of decline was similar at two years of age. Improvements in the battery health diagnostics, continuous monitoring of battery temperatures and state of charge, and verification of a fundamental model of battery health are needed before causes and remedies for the observed decline can be pinpointed. If the high rate of decline in battery capacity that we observed in the first 2.3 years of a 30 kWh Leaf’s lifetime were to continue, the financial and environmental benefits of this model may be significantly eroded. Despite 30 kWh Leafs accounting for only 14% of all light battery electric vehicles registered for use on New Zealand roads at the end of February 2018, there is also the potential for the relatively poor performance of this specific model to undermine electric vehicle uptake more generally unless remedies can be found.

Iron deficiency anemia (IDA) is a world health problem for humans and other mammals; affecting critical stages of development. Pigs have been used as an experimental model for the study and prevention of anemia because of physiological and metabolic similarities with humans. Iron dextran particles (IDP) are used for intramuscular (IM) IDA treatments in pigs, but are insufficient for prevention of anemia due to quick metabolization. Therefore, the objective of this study was to develop chitosan thermosensitive hydrogels (CTH) formulations and to study their potential as a mammalian parenteral iron dextran supplementation strategy. CTH were loaded with IDP at increasing iron concentrations (0.1, 0.2 and 0.4 g of theorical iron/g of chitosan) and characterized as an IM iron supplement. All the CTH-IDP formulations were thermosensitive and can be injected IM at ~4 °C, with a significant rise in viscosity between 25-37 °C. IDP content was physically trapped in the chitosan hydrophobic gel at 37 °C, without evidence of chemical bonding. We conclude that CTHs are a promising strategy for IM delivery strategy of IDP, and these results may be useful for future iron supplementation studies in pigs, humans and other mammals.

The differentiation of ESCs into cardiomyocytes in vitro is an excellent and reliable model system for studying normal cardiomyocyte development in mammals, modeling cardiac diseases, and for use in drug screening. Mouse ESC differentiation still provides relevant biological information about cardiac development. However, the current methods for efficiently differentiating ESCs into cardiomyocytes are limiting. Here, we describe a “WNT Switch” method to efficiently commit mouse ESCs into cardiomyocytes using the small molecule WNT signaling modulators CHIR99021 and XAV939 in vitro. This method significantly improves the yield of beating cardiomyocytes, reduces number of treatments, and is less laborious.

RAS oncogenes are amongst the most commonly mutated proteins in human cancers. They regulate a wide range of effector pathways that control cell proliferation, survival, differentiation, migration and metabolic status. Including aberrations in these pathways, RAS dependent signaling is altered in more than half of human cancers. Targeting mutant RAS proteins and their downstream oncogenic signaling pathways has been elusive. However, recent results comprising detailed molecular studies, large scale omics studies and computational modeling have painted a new and more comprehensive portrait of RAS signaling that helps us to understand the intricacies of RAS, how its physiological and pathophysiological functions are regulated, and how we can target them. Here, we review these efforts particularly trying to relate the detailed mechanistic studies with global functional studies. We highlight the importance of computational modeling and data integration to derive an actionable understanding of RAS signaling that will allow us to design new mechanism based therapies for RAS mutated cancers.

Questions: Elevation, biodiversity, and forest structure are commonly correlated, but their relationships near the positive extremes of biodiversity and elevation are unclear. We asked 1) How does forest structure vary with elevation in a high biodiversity, high topographic complexity region? 2) Does forest structure predict vascular plant biodiversity? 3) Is plant biodiversity more strongly related to elevation or to forest structure? Location: Great Smoky Mountains National Park, USAMethods: We used terrestrial LiDAR scanning (TLS) to characterize vegetation structure in 12 forest plots. We combined two new canopy structural complexity metrics with traditional TLS-derived forest structural metrics and vascular plant biodiversity data to investigate correlations among forest structure metrics, biodiversity, and elevation. Results: Forest structure varied widely across plots spanning the elevational range of GRSM. Our new measures of canopy density (Depth) and structural complexity (σDepth) were sensitive to structural variations and effectively summarized horizontal and vertical dimensions of structural complexity. Vascular plant biodiversity was negatively correlated with elevation, and more strongly positively correlated with vegetation structure variables. Conclusions: The strong correlations we observed between canopy structural complexity and biodiversity suggest that structural complexity metrics could be used to assay plant biodiversity over large areas in concert with airborne and spaceborne platforms.

Running is a basic form of human locomotion and one of the most popular sports worldwide. While the leg biomechanics of running have been studied extensively, few studies have focused on the upper-body movement. However, an effective arm swing and longitudinal rotation of the shoulders play an important role in running efficiency as they must compensate for the longitudinal torques generated by the legs. The aim of this study is to assess the upper-body rotation using wearable inertial sensors and to elucidate its relation to energy expenditure. Eighty-six junior elite middle and long-distance runners (37 female, 49 male) performed an incremental treadmill test with sensors attached on both shoulders, tibiae and the sacrum. Mean and total horizontal shoulder and pelvis rotation per stride were derived while energy costs were determined using respiratory gas analysis and blood sampling. Results show that shoulder and pelvis rotation increase with running speed. While shoulder rotation is more pronounced in female than in male runners, there is no sex difference for pelvis rotation. Energy cost of running and upper trunk rotation prove to be slightly negatively correlated. In conclusion, upper body rotation appears to be an individual characteristic influenced by a sex-specific body mass distribution.

Radiotherapy using accelerated charged particles is rapidly growing worldwide. About 85% of the cancer patients receiving particle therapy is irradiated with protons, which have physical advantages compared to X-rays but similar biological response. In addition to the ballistic advantages, heavy ions present specific radiobiological features that can make them attractive for treating radioresistant, hypoxic tumors. An ideal heavy ion should have lower toxicity in the entrance channel (normal tissue), and being exquisitely effective in the target region (tumor). Carbon ions have been chosen because they represent the best combination in this direction. Normal tissue toxicities and second cancer risk are similar to those observed in conventional radiotherapy. In the target region, they have increased relative biological effectiveness and reduced oxygen enhancement ratio compared to X-rays. Some radiobiology properties of densely ionizing carbon ions are so distinct from X-rays and protons that they can be considered as a different “drug” in oncology, and may elicit favorable responses such as increased immune response and reduced angiogenesis and metastatic potential. The radiobiological properties of carbon ions should guide patient selection and treatment protocols to achieve optimal clinical results.

Analysis of non-stationary and nonlinear sound signals obtained from dynamical processes is one of the greatest challenges in signal processing. Turning machine operation is a highly dynamic process persuaded by many events such as dynamical responses, chip formations and operational conditions of machining. Traditional and widely used fast Fourier transformation and spectrogram is not suitable for processing sound signals acquired from dynamical systems as its result have significant deficiencies because of stationary assumptions and having priori basis. The relatively new technique, Discrete Wavelet Transform, which uses Wavelet decomposition and the recently developed technique, Hilbert Huang Transform (HHT) which uses Empirical Mode Decomposition have notably better properties in the analysis of nonlinear and non-stationary sound signals. This paper presents a comparative study on the decomposition of multicomponent sound signals using Empirical Mode Decomposition and Wavelet Decomposition to highlight the suitability found in HHT to analyze tool-emitted sound signals received from turning processes. Apart from the short mathematical and theoretical foundations of the transformations, this paper demonstrates their decomposition strength using an experimental case study of tool flank wear monitoring in turning. It also concludes HHT is more suitable than DWT to analyze tool-emitted sound signals received from turning processes.

Heart rate variability (HRV) is a measurement of the fluctuation of time between each heartbeat and reflects the function of the autonomic nervous system. HRV is an important indicator for both physical and mental status and for broad-scope diseases. In this review, we discuss how wearable devices can be used to monitor HRV, and we compare the HRV monitoring function among different devices. In addition, we have reviewed the recent progress in HRV tracking with wearable devices and its value in health monitoring and disease diagnosis. Although many challenges remain, we believe HRV tracking with wearable devices is a promising tool that can be used to improve personal health.

The study reports about a case of a lung cancer patient with increasing difficulties in falling asleep and frequent periods of wakefulness. Severe dyspnea related to pneumonitis caused as a side effect of immunotherapy worsened the situation. Eventually, fear of falling asleep developed, including panic attacks and anxiety of choking, which was shown to lead to nights of complete wakefulness. The patient did not only sleep poorly; he did not sleep at all at night for several days, as evidenced by the notes he made during the night. Polygraphy showed no evidence of sleep-disordered breathing, but frequent periods of wakefulness and reduced basal saturation around 90% during sleep due to lung changes such as extensive functional failure of the left upper lobe with position-dependent shunts. The authors hypothesized that the symptoms described were causally related to a drop in oxygen saturation in the patient's blood. Therefore, they pursued the goal of finding a measurement technique that is as inexpensive as possible and that the patient can operate without outside assistance and great effort. So the patient started using a low-cost wearable device that allows simultaneous measurements of blood oxygen content, pulse rate and movement intensity. It consists of a finger ring with pulse oximetry sensor and a wristband with the control unit containing a vibration motor. The described device reliably warned of disturbances in oxygen concentration in the blood during the night with its vibration alarm. By use of that device during the whole night at home, the events of reduced oxygen saturation and the anxiety symptoms were reduced. Sleep disturbances with sudden awakenings did not occur when using the device. The patient benefited from the security gained in this way and slept much more peacefully, and he could spend nights without waking up again. In conclusion, wearable oximeters with vibration alarm can be recommended for patients’ home care in lung cancer patients.

In the U.S. 44% of low-income households struggle to pay their utility bills, affecting their ability to afford necessities such as food and health expenses. Several government and utility funded energy efficiency programs exist to assist those experiencing energy insecurity. In Salt Lake City, Utah, there is a high demand for, but low availability of, energy efficiency services in underserved neighborhoods creating an opportunity for creative community-based programs to fill this inherent gap. This pilot project, involving the exchanging of LED bulbs in Salt Lake City, highlights the development of a community-based energy efficiency program that aims to bring energy savings to a uniquely targeted portion of the city and determines its feasibility in addressing energy insecurity at a larger scale. Through the 8-month project duration, 1,432 bulbs were exchanged at 23 events reaching 181 households in low-income areas. Through a year of use, these bulbs are estimated to save residents approximately 18,219 USD in electricity bills and reduce CO2 emissions from power plants by 122.23 metric tons, in addition to a savings of 4,400 USD in social cost of carbon as defined by the U.S. Environmental Protection Agency. Since this pilot reached less than 1% of households, we extrapolated a reach of 2%, 5%, and 7.5% and found substantial potential decreases in power plant emissions and financial savings. As this project is ongoing and being expanded, we discuss relevant findings that will help shape future community-based models so that they are appropriately deployed and more effective in alleviating local energy insecurity.

The study aims to explore gender differences in smoking and drinking in three Asian cities—Hanoi, Shanghai and Taipei, and assesses the magnitude of these gender differences across cities. A total of 17,016 adolescents and young adults, aged 15 to 24 years, residing in both urban and rural area of Hanoi, Shanghai and Taipei were selected by multistage sampling methods and surveyed by face to face interview. The gender differences are significant for smoking-only, drinking-only, and both behaviors in each city. With respect to smoking-only, males are more than 30.66 times as likely to report it compared with females in Hanoi, followed by Shanghai and Taipei. The above trend holds true when further examining drinking-only and both smoking and drinking. The magnitude of gender differences in smoking-only, drinking-only, and both behaviors widely vary across the three cities. Future research is needed to further examine the mechanisms behind these gender differences and how these differences may be utilized to prevent and reduce smoking and drinking in the adolescent and young adult population.

Microalgae production is expensive and demands high volumes of water and energy to meet all market demands and yet the production of secondary metabolites using alternative media needs deeper studies. Among alternative media, the use of sugar cane vinasse has gained attention for microalgae cultivation. In this work, we’ve compared the biomass yield and secondary metabolites of Chlorella sorokiniana grown in a commercial medium (Sueoka) and in alternative medium prepared with cane vinasse (0.1%) supplemented with N, P2O5 and K2O (commercial formula 20-5-20 g.L-1). The production of microalgae biomass grown in an alternative medium was 2.2% lower, but reached its maximum growth point 14 days faster than the commercial medium. The average level of Phenolic compounds on the commercial medium were 6.02 ± 0.13 mg GAE .g-1 and increased to 15.28 ± 0.32 mg GAE.g-1when C. sorokinianawere grown in the vinasse medium. Same how, Flavonoids contents varied from 13.12 ± 1.33 to 72.30 ± 5.28 mg QE. g-1 to commercial and vinasse medium, respectively. The maximum AOA of C. sorokiniana grown in vinasse medium was 88.05% at a concentration of 1500 µg.mL-1 of extract, with IC50 at 357.7 ± 27.35 µg.mL-1. Different factors seem to induce variances on secondary metabolites synthesis, mostly stress due to QOD and ions added to the medium by vinasse. The authors recognize there are more investigations to be done, but increasing a natural and low cost pathway for flavonoids yield open up an interesting field for the bioprospection of microalgae.

This work presents patient radiation dose data for pediatric interventional cardiology procedures in a large hospital in Colombia. The data collection period was from April 2020 to July 2022. The local DRLs were calculated as the 3rd quartile of patient dose data distributions for kerma area-product (Pka) values. The sample of collected clinical procedures (255) was divided into diagnostic and therapeutic procedures and grouped into five weight and five age bands. The Pka differences found between diagnostic and therapeutic procedures were statistically in all weight and age bands, except the group between 1-5 years. The local DRLs were 69 Gy/cm2 (< 5 kg), 3.44 Gy/cm2 (5-<15 kg), 8.87 Gy/cm2 (15-<30 kg), 10.51 Gy/cm2 (30-<50 kg) y 22.61 Gy/cm2 (50-<80 kg), respectively. In conclusion, from comparing our results with other existing DRL values, we are similar to other centers and scope to continue optimizing the radiation dose values. This will contribute to setting national diagnostic reference levels (DRLs) for Colombia in the near future.

FPGA-based data acquisition and processing systems play an important role in modern high-speed, multichannel measurement systems, especially in High-Energy and Plasma Physics. Such FPGA-based systems require an extended control and diagnostics part corresponding to the complexity of the controlled system. Managing the complex structure of registers while keeping the tight coupling between hardware and software is a tedious and potentially error-prone process. Various existing solutions aimed at helping that task do not perfectly match all specific requirements of that application area. The paper presents a new solution based on the XML system description, facilitating the automated generation of the control system’s HDL code and software components and enabling easy integration with the control software. The emphasis is put on reusability, ease of maintenance in case of system modification, easy detection of mistakes, and the possibility of use in modern FPGAs. The presented system has been successfully used in data acquisition and preprocessing projects in High-Energy Physics experiments. It enables easy creation and modification of the control system definition and convenient access to the control and diagnostic blocks. The presented system is an open-source solution and may be adopted by the user for particular needs.

In this paper, we aim to assess the electric current parameters and report the analysis of the associated degree of ventricular recovery during left ventricular assist device (LVAD) support. An assumption was made there is a linear relationship between ventricular recovery degree and the pump electric current pulsatility index (PI). The experimental study was carried out using the ViVitro Pulse Duplicator System with Sputnik 1 LVAD connected. Cardiac output (CO) and cardiac power output (CPO) were used as a measure of ventricular recovery degree. Different heart rates (HR) (59, 73, 86 bpm) and pump speeds (7600–8400 rpm in 200 rpm steps) were investigated. Ventricular stroke volumes in the range of 30–80 ml for each heart rate at certain pump speed were used. The obtained relationships of CO and CPO vs. PI was linear as the coefficients of determination for each regression curve were more than 0.8. CO vs. PI: R2=0.9218; 0.9271; 0.9172 and CPO vs. PI: R2=0.8517; 0.841; 0.8244 for HR=59 bpm; 73 bpm; 86 bpm, respectively. Study findings suggest that adequate interpretation of parameters could potentially serve as a valuable clinical tool to assess ventricular recovery based on LVAD infrastructure without requiring any special hemodynamic assessment.

Divergences have become a very useful tool for measuring similarity (or dissimilarity) between probability distributions. Depending on the field of application a more appropriate measure may be necessary. In this paper we introduce a family of divergences we call gamma-divergences. They are based on the convexity property of the functions that generate them. We demonstrate that these divergences verify all the usually required properties, and we extend them to weighted probability distribution. We investigate their properties in the context of kernel theory. Finally, we apply our findings to the analysis of simulated and real time series.

With the introduction of more and more monoclonal antibodies selectively targeting various mediators of the immune-system, together with Janus-Kinase (JAK)-inhibitors with variable affinities towards different JAK subtypes, the available therapeutic options for the treatment of inflammatory bowel diseases (IBD) have undergone an acceleration in the last five years. On the other hand, the prevalence of IBD patients over 65-years of age is steadily increasing and, with this, there is a large population of patients that presents more comorbidities, polypharmacy, and, more frequently, frailty compared to younger patients, exposing them to potentially major risks for adverse events deriving from newer therapies, e.g. infections, cardiovascular risks, and malignancies. Unfortunately, pivotal trials for the commercialization of new therapies rarely include older IBD patients and those with serious comorbidities are virtually excluded. In the present review, we focus on existing literature from pivotal trials and real-world studies, analyzing data on efficacy/effectiveness and safety of newer therapies in older IBD patients with special emphasis on comorbidities and frailty, two distinct but intercorrelated aspects of the older population since age by itself seems to be of minor importance.

Sulphuric acid is a widely used raw material in the chemical industry. Its corrosive effect on materials varies considerably, depending on impurities, temperature and water content. Accordingly, good corrosion resistance under all conditions is very difficult to achieve. This is especially an issue for micro process apparatus with very thin walls. Furthermore, such devices are often joint by diffusion bonding what may alter materials properties due to high temperatures and long dwell times. In fact, for each new material, the diffusion bonding parameters must be optimized and the impact on mechanical as well as corrosion properties must be investigated. In this paper, two high molybdenum alloys, namely Hastelloy B3 and BC-1, were evaluated. Diffusion bonding tests were performed using ten layers of sheet material in between round stock. Corrosion tests were performed in 70 % sulphuric acid at 100°C for 1000 h. Tensile tests on both alloys were carried out for different material conditions, to determine the change in mechanical strength and elongation at fracture values. In general, independent of the condition of the materials, the fracture behavior of both alloys was found to be ductile and the specimens show the typical dimple structure, in the case of diffusion bonded samples, interrupted by weak spots or rather non-bonded areas. These areas are obviously causing the onset of material failure and thus, a degradation of mechanical properties. Tensile samples, that were aged in 70% sulphuric acid at 100°C for 1000 hours showed local corrosion attacks at the grain boundaries at the circumferential surfaces and especially at the joining planes – for Hastelloy B3 much more pronounced than for Hastelloy BC-1. Accordingly, a further decrease of both, the stress- and elongation at fracture values is observed. However, the typical material parameters like 0.2 % yield strength used for dimensioning components are found to be sufficient high, even when operating the materials under such harsh conditions. When concluding the results, at least Hastelloy BC-1 reveals both sufficient good mechanical properties and an excellent corrosion resistance, regardless of the heat treatment, and could be considered for manufacturing micro-process engineering apparatuses operated in a sulphuric acid environment. This is a significant advance compared to the results obtained within a AiF project, previously carried out on four different materials to investigate the corrosion resistance in sulphuric acid.

A nonlinear MEMS multimass sensor is investigated. The MEMS design consists of an array of nonlinear microcantilevers clamped to a shuttle mass which, in turn, is attached to a linear spring and a dashpot. The microcantilevers are made of a polymeric hosting matrix reinforced by aligned carbon nanotubes (CNT) with different CNT volume fractions in each cantilever so as to suitably tune the frequency bandwidth of the device. The advantages of a single input-single output (SISO) system are here exploited for the design, actuation and detection principles as in previous literature.

Purpose: Post-pandemic management of COVID-19 infections and any emergent outbreaks is as an endemic disease remains a public health concern. Vaccine hesitancy may continue to hamper efforts to respond any new disease outbreaks and future epidemics. This qualitative study aimed to explore factors influencing covid-19 vaccine acceptance and hesitancy in Kenya too gain deeper insights on this issue. Methods: The study was implemented in Western Kenya using key informant interviews. Fourteen (14) key informants were purposively selected for the study. All interviews were transcribed and analyzed using thematic analysis. Interpretation of findings was done within the framework of the Health Belief Model. Key findings: Knowledge was a critical factor in combatting misinformation and fostering vaccine acceptance among participants in this study. Misinformation included rumors that the vaccine lowers immunity and was intended for population control. Cues to action included influence from political and opinion leaders and observing the loss of life among unvaccinated individuals. Perceived barriers to vaccine uptake included fear of vaccine safety, side effects, long waiting times at that time of our study, fear of contracting the COVID-19 at vaccination sites, family/spousal influence on vaccine uptake and fear of the unknown with the vaccine. Conclusion: Findings from this study provides insight into areas for targeted strategies for managing Covid-19 vaccinations and future pandemics. Within the framework of the Health Belief Model, this study identified salient barriers and facilitators of COVID-19 vaccine hesitancy that may be helpful to inform future pandemic response.

The coordination polymer [Fe(NH₂trz)₃](2ns)₂ exhibits the rare phenomenon of spin crossover in an attractive temperature range, i.e., somewhat above room temperature. Spin crossover in [Fe(NH₂trz)₃](2ns)₂ is manifest by thermochromism, which is accompanied by a magnetic transition from diamagnetism to paramagnetism. However, [Fe(NH₂trz)₃](2ns)₂ is brittle and difficult to process, which limits its use. In this study, we show that [Fe(NH₂trz)₃](2ns)₂ can be co-processed with ultrahigh molecular weight polyethylene (UHMWPE), which possesses outstanding mechanical properties, particularly when tensile drawn. Therefore, [Fe(NH₂trz)₃](2ns)₂–UHMWPE blends were gel-processed by extrusion, employing a relatively poor solvent, which has recently been shown to offer advantages compared to good solvents. Uniform and flexible films, ribbons and fibers with [Fe(NH₂trz)₃](2ns)₂ fractions as high as 33.3% m/m were obtained that could be readily drawn. Spin crossover in the coordination polymer is retained in these materials, as evident from their thermochromism. The tensile strength and Young’s modulus of the blends exceed those of typical commodity polymers. Thus, the films, ribbons and fibers constitute a special class of multifunctional materials that combine the flexibility and excellent mechanical properties of drawn UHMWPE with the spin crossover behavior of [Fe(NH₂trz)₃](2ns)₂.

Escherichia coli O157:H7, a Shiga toxin-producing E. coli (STEC) is an important pathogen related to foodborne disease that is responsible for a growing number of outbreaks worldwide and has been detected in processed meats, dairy, and fresh vegetables. Although culturing is the gold standard method for detection of this bacteria, molecular methods based on nucleic acid amplification techniques such as PCR are becoming more common because of their rapidity, sensitivity, and specificity. However, to ensure reliable results among the several alternative PCR protocols (e.g., commercial kits and reference methods), different measurement assurance tools, including validated methods, reference materials, and proficiency tests among others, are required. Herein, we present a digital PCR method validation for E. coli O157:H7 detection and quantification using seven gene sequences; this method quantified nucleic acids from different E. coli serotypes, with a detection range between 6.6 to 7,900 copies/µL and a repeatability standard deviation over the concentration range of between 1% to 13.6%. The relative standard uncertainty was 3.5%–14.6%, and the detection limit was 0.27 copies/µL. Subsequently two batches of a candidate reference material based on E. coli O157:H7 genomic DNA were then produced and characterized for evaluation of copy number concentration with the validated dPCR method, with assigned values of 164,770 ± 9,251 and 172 ± 9 copies/μL. Thus, this study demonstrated the development a validated method and reference material for dPCR and qPCR detection of E. coli O157:H7, a key STEC responsible for food poisoning.

Eurytoma erythrinae Gates & Delvare (Hymenoptera: Eurytomidae), is an important biological control agent of the erythrina gall wasp (EGW), Quadrastichus erythrinae Kim (Hymenoptera: Eulophidae), an invasive species native likely originating in eastern Africa, that is a threat to Erythrina trees in Hawaii and worldwide. Thousands of Erythrina trees in Hawaii succumbed to EGW since 2005 and died within few years of infestation. The endemic wiliwili tree, Erythrina sandwicensis, an important component of Hawaii’s dry forests, and one of few deciduous native trees were severely impacted by this wasp. Early during the invasion by EGW it became evident that the endemic species may be driven to extinction, and exploration programs for natural enemies of the EGW started in December 2005. East Africa was selected as the start point for natural enemy exploration owing to high native Erythina species richness. Several gall formers were found in Tanzania and a putative color variant type of Q. erythrinae was detected in association with three ectoparasitoids. During January 2006, the dominant parasitoid of this gall former was introduced to Hawaii and described as the new species, E. erythrinae. It was found in Ghana, and South Africa attacking other gall wasp species on Erythrina. Eurytoma erythrinae was a voracious ectoparasitoid feeding as a predator on 1 – 5 adjacent EGW immatures to complete its development. Host specificity studies that included seven non-target gall-forming species showed no evidence of attraction or parasitism by this parasitoid. Mean ± SEM longevity of host deprived females (40.4 ± 2.2 days) was significantly higher than males (20.5 ± 1.1 days). Host feeding enhanced longevity of ovipositing female (51.3 ± 1.5 days). Female’s peak fecundity (105 – 239 offspring /female), host feeding biology, short life cycle (18.4 ± 0.1 days), and synchronization with the host, were additional desirable attributes of E. erythrinae. The parasitoid was approved for field release in Hawaii in November 2008. A total of 3998 wasps were distributed on six Hawaiian Islands, with establishment in less than a year. Impacts on high density infestations of EGW were sufficient to prevent tree deaths. Limited rates of parasitism on low density galled leaves, flowers, and seedpods necessitated the consideration for releasing a second parasitoid, Aprostocetus nitens (Hymenoptera: Eulophidae). We report on the reproductive characteristics, and host specificity of E. erythinae that could be of importance for classical biocontrol programs in areas with EGW problem.

Inherited retinal dystrophies (IRDs) are a global problem that is largely unaddressed, especially in Africa. Black indigenous Africans are rarely represented in research that develop genetic tests and genetic therapies for IRDs yet their genomes are more diverse. The aim of this literature review is to synthesize information on the IRD genetic research conducted among indigenous black Africans to identify challenges and opportunities for progress. PubMed was searched to identify empirical publications reporting the genetic analysis of IRDs among indigenous Africans. A total of 10 articles were selected for the review. Based on the information in the articles, the main genetic testing methods in use include next-generation, whole exome, and Sanger sequencing. The main IRDs characterized by the genetic tests include retinitis pigmentosa, Leber Congenital Amaurosis, Stagardt disease, and cone dystrophy. Examples of implicated genes include MERTK, GUCY2D, ABCA4, and KCNV2 for the four IRDs respectively. Research activities on the genetics of IRDs are generally scanty in Africa. Even in South Africa and North Africa where some research activities were noted, only a few indigenous black Africans were in the study cohorts. There is an urgent need for genetic research on IRDs, especially in East, Central, and West Africa.

We hypothesized that reticuloruminal temperature and pH, as well as cow activity, can be used as biomarkers for the early diagnosis of clinical mastitis in dairy cows. Therefore, we aimed to detect the relationship between reticuloruminal temperature and pH, cow activity, and clinical mastitis in dairy cows. We randomly selected cows with clinical mastitis and clinical healthy cows (HG) out of 600 milking cows. We recorded the following parameters during the experiment: reticulorumen tem-perature (RR temp.), reticulorumen pH (RR pH), and cow activity. We used smaXtec boluses (smaXtec animal care technology®, Graz, Austria). In this investigation, reticulorumen data ob-tained seven days before diagnosis were compared to HG data from the same time period. CM cows were observed on the same days as the healthy cows. The healthy group’s RR pH was 7.32% higher than that of cows with CM. Reticulorumen temperature was also 1.25% higher in the CM group than in the control group. The healthy group had a higher average value for walking activity and was 17.37% higher than the CM group. The data of reticulorumen pH changes during 24 h showed that during the day, the pH changed from 5.53 to 5.83 in the CM group. By contrast, pH changed from 6.05 to 6.31 in the control group. The lowest reticulorumen pH in the CM group was detected on the third day before diagnosis. It was 15.76% lower than the highest reticulorumen pH detected on the sixth day before diagnosis. The lowest reticulorumen pH in CM cows was detected at 0 and 1 days before diagnosis. It was 1.45% lower than the highest reticulorumen pH detected on the second day before diagnosis. The lowest walking activity in the CM group was detected 0 days before diagnosis, 50.60% lower than on the fifth day before diagnosis. The lowest walking activity was detected 0 days before diagnosis, 39.57% lower than on the seventh day before diagnosis. In this study, we found that reticuloruminal temperature, reticuloruminal pH, and cow ac-tivity could be used as biomarkers for the early diagnosis of clinical mastitis in dairy cows.

Remote sensing plays a central role in the assessment of environmental phenomena and has increasingly become a powerful tool for monitoring shorelines, rivers morphology, flood waves delineation and floods assessment. Optical based monitoring and characterization of river evolution at long time scales is a key tool in fluvial geomorphology. However, the evolution occurring during extreme events is crucial for the understanding of the river dynamics under severe flow conditions and requires the processing of data from active sensors to overcome cloud obstructions. This work proposes a cloud-based unsupervised algorithm for the intra-event monitoring of river dynamics during extreme flow conditions based on time series of Sentinel-1 SAR data. The method allows the extraction of multi-temporal series of spatially explicit geometric parameters at high time and spatial resolutions, linking them to the hydrometric levels acquired by reference gauge stations. Intra-event reconstruction of inundation dynamics has led to the estimation of the relationship between hydrometric level and wet area extension and the assessment of bank erosion phenomena. Time series of SAR acquisitions, provided by Copernicus Sentinel-1 satellites, were analyzed to quantify changes in the wet area of a reach of the Tagliamento river under different flow conditions. The algorithm, developed within the Python-API of GEE, first empowers the Sentinel-1 images with the hydrometric level, then involves radiometric slope correction and speckle noise filtering. The Otsu method is then used for image segmentation leading to a water and dry land binary classification. Results support many types of analysis about river dynamics, including morphological changes, floods monitoring and relief efforts and bio-physical habitat dynamics. The results encourage future advancements and applications of the algorithm, specifically exploring SAR data from ICEYE and Capella Space constellations, which offer significantly higher spatial and temporal resolutions compared to Sentinel-1 data.

Competency frameworks are developed for a variety of purposes, including describing professional practice and informing education and assessment frameworks. Despite the volume of competency frameworks developed in the healthcare professions, guidance remains unclear and is inconsistently adhered to (perhaps in part due to a lack of organising frameworks), there is variability in methodological choices, inconsistently reported outputs, and a lack of evaluation of frameworks. As such, we proposed the need for improved guidance. In this paper we outline a six-step model for developing competency framework that is designed to address some of these shortcomings. The six-steps comprise [1] identifying purpose, intended uses, scope, and stakeholders; [2] theoretically informed ways of identifying the contexts of complex, ‘real-world’ professional practice, which includes [3] aligned methods and means by which practice can be explored; [4] the identification and specification of competencies required for professional practice, [5] how to report the process and outputs of identifying such competencies, and [6] built-in strategies to continuously evaluate, update and maintain competency framework development processes and outputs. The model synthesizes and organizes existing guidance and literature, and furthers this existing guidance by highlighting the need for a theoretically-informed approach to describing and exploring practice that is appropriate, as well as offering guidance for developers on reporting the development process and outputs, and planning for the ongoing maintenance of frameworks.

Poor soil health is a critical problem in many urban landscapes. Degraded soil restricts plant growth and microorganism activity, limiting the ability of urban landscapes to perform much needed ecosystem services. Incorporation of approximately 33% compost by volume into degraded soil has been proven to improve soil health and structure over time while avoiding the financial and environmental costs of importing soil mixes from elsewhere. However, additions of high volumes of compost could potentially increase the risk of nutrient loss through leaching and runoff. The objective of our study was to consider the effects of different compost amendments on soil health, plant health and susceptibility to nutrient leaching in order to identify ranges of acceptable compost characteristics that could be used for soil remediation in the urban landscape. We conducted a bioassay with Phaseolus vulgaris (Bush Bean) to measure the effect of nine composts from different feedstocks on various plant health parameters. We collected leachate prior to planting to measure nutrient loss from each treatment. We found that all compost amendments improved soil health. Nutrient-rich, manure-based composts produced the greatest plant growth, but also leached high concentrations of nitrate and phosphorus. Some treatments provided sufficient nutrients for plant growth without excess nutrient loss. We concluded, when incorporating as much as 33% compost by volume into a landscape bed, the optimal compost will generally have a C:N ratio of 10-20, P-content <1.0% and a soluble salt content between 1.0 and 3.5 mmhos/cm. These recommendations should ensure optimal plant and soil health and minimize nutrient leaching.

X-ray fluorescence is largely employed in the measurement of the thickness of coatings. Despite of its diffusion, the task is not straightforward because of the complex physics involved that results in high dependence on matrix effects. Thickness quantification is in practice accomplished using the Fundamental Parameters approach, adjusted with empirical measurements of standards with known composition and thickness. This approach has two major drawbacks: i) there are no standards for any possible coating and coating architecture and ii) even relying on standards, the quantification of unknown samples requires the precise knowledge of the matrix nature (e.g., in case of multilayer coatings the thickness and the composition of each underlayer). In this work, we describe a semiquantitative approach to coatings thickness measurement based on the construction of calibration curves through simulated XRF spectra built with Monte Carlo simulations. Simulations have been performed with the freeware software XMI-MSIM. We have assessed the accuracy of the methods by comparing the results with those obtained by i) XRF thickness determination with standards and ii) FIB-SEM cross-sectioning. Then we evaluated which parameters are critical in this kind of indirect thickness measurements.

This paper presents an alternative constraint handling approach within a specialized genetic algorithm (SGA) for the optimal reactive power dispatch (ORPD) problem. The ORPD is formulated as a nonlinear single-objective optimization problem aiming to minimize power losses while keeping network constraints. The proposed constraint handling approach is based on a product of sub-functions that represents permissible limits on system variables and that includes a specific goal on power loss reduction. The main advantage of this approach is the fact that it allows a straightforward verification of both feasibility and optimality. The SGA is examined and tested with the proposed constraint handling approach and the traditional penalization of deviations from feasible solutions. Several tests are run in the IEEE 30, 57, 118 and 300 bus test power systems. The results obtained with the proposed approach are compared to those offered by other metaheuristic techniques reported in the specialized literature. Simulation results indicate that the proposed genetic algorithm with the alternative constraint handling approach yields superior solutions when compared to other recently reported techniques.

In the provinces of the region, empirical constructions reached maximum points with these practices. The effects and pathologies appear as physical, chemical and mechanical failures in pillars, walls and roofs, generating uncertainty for the user. The current powerful design can detect the interior deterioration of coatings in adobe, brick and concrete constructions, and prevent collapses, material and economic losses. Experimental methods performed affirm the serious validity. The accuracy of the simulation and design provide a pre-test reliability of 95%. Five piles constructed of various materials participate in the prototype performance test, there is a correlation (R=0.9997) between the magnetic field range "B" (cm) and density "ρ" (g/cm³), also by increasing the current (i) in transit Q1 and coil L1, the induction of the "B" increases proportionally until penetrating the density of the wall of the building, having 5% reading error.

This research focused on the perception of visually impaired individuals regarding tactile image creation using 3D printing. We developed and applied an experiment with 28 participants with visual impairments. They performed tasks based on skills whose foundations are needed and used in their daily lives, such as scanning, tactile discrimination, picture and spatial comprehension. The tactile images used in this study were developed by additive manufacturing and printed over 180 g/m² sulphite paper. The best performances were obtained when (1) the tactile image contour line heights were between 0.2 mm and 0.4 mm; and (2) the texture presented densities between 10% and 50%, when alone, or between 10% and 90%, when combined with another texture. The tested line widths (0.8 mm and 1.2 mm) did not present statistically significant differences in the results. Vision status (low vision or blindness) and moment of vision loss (congenital or late blind) did not influence the results. Schooling affected the activities of identifying objects and locating their copies. In the Conclusion section, there is a detailed recommendation list for the production and application of tactile materials, which range from simplifying forms to encouraging the use of both hands during content assimilation.

The increase in fungal infections, accompanied by adverse effects and acquired resistance associated with the use of antifungal agents used for their clinical management, have facilitated the search for new substances with antifungal properties. Naphthoquinones have been investigated due to their multiple biological activities, including their significant antifungal potential. This study aimed at evaluating the antifungal potential of naphthoquinones against opportunistic fungi and dermatophytes and to assess the impact of a selected naphthoquinone on the formation of the cell wall, ergosterol membrane, and cellular membrane of Candida albicans ATCC 60193. Additionally, cytotoxicity in the MRC-(Medical Research Council-)5 cell lineage, Artemia salina, and tomato as well as arugula seeds was evaluated. The antifungal activity of four naphthoquinones was assessed using well-characterized fungal strains, the minimum inhibitory concentration (MIC) was determined applying the microdilution assay technique. Antifungal activity of the assessed naphthoquinones could be confirmed, particularly for 2,3-DBNQ (2,3-dibromo-1,4-naphthoquinone), which showed prominent antifungal activity (MIC of &lt;1.56 - 6.25 µg/mL) in all chosen test settings. However, its toxicity in MRC-5 cells (IC50 = 15.44 µM), a recorded 100% mortality in A. salina at a concentration of 50 µg/mL, as well as inhibition of 94.8% of the tomato seeds at a concentration of 400 µg/mL and inhibition of 64.1% of arugula seeds at a concentration of 200 µg/mL may limit hypothetical therapeutic applications. It was demonstrated that the likely mechanism of action of 2,3-DBNQ involves interfering with fungal membrane permeability, leading to increased leakage of nucleotides. This study adds to available knowledge on antifungal effects of naphthoquinones, especially of 2,3-DBNQ, against opportunistic yeasts and dermatophytes. However, the observed cytotoxicity in the MRC-5 cell lineage, A. salina, as well as tomato and arugula seeds highlights a need for further research to optimize the selectivity and safety profile of naphthoquinones like 2,3-DBNQ before potential clinical use may be assessed.

Cellular biomolecular condensates termed ribonucleoprotein (RNP) granules often are enriched in messenger RNA (mRNA) molecules relative to the surrounding cytoplasm. Yet, the spatial localization and diffusion of mRNAs in close proximity to phase separated RNP granules is not well understood. In this study, we performed single molecule fluorescence imaging experiments of mRNAs in live cells in the presence of two types of RNP granules, stress granules (SG) and processing bodies (PB), which are distinct in their molecular composition and function. We developed a photobleaching- and noise-corrected colocalization imaging algorithm that was employed to determine the accurate positions of individual mRNAs relative to the granule’s boundaries. We found that mRNAs are often localized at granule boundaries, an observation consistent with recently published data. We suggest that mRNA molecules become spontaneously confined at the RNP granule boundary similar to the adsorption of polymer molecules at liquid-liquid interfaces, which is observed in various technological and biological processes. We also suggest that this confinement could be due to a combination of intermolecular interactions associated with, first, the screening of a portion of the RNP granule interface by the polymer and, second, electrostatic interactions due to a strong electric field induced by a Donnan potential generated across the thin interface.

Abstract: Oncogenic RAS mutations drive more than half of human cancers, and RAS inhibition is the holy grail of oncology. Thirty years of relentless efforts and harsh disappointments have taught us about the intricacies of oncogenic RAS signalling that allow us to now get a pharmacological grip on this elusive protein. The inhibition of effector pathways, such as the RAF-MEK-ERK pathway, has largely proven disappointing. So far, most of these efforts were aimed at blocking the activation of ERK. Here, we discuss RAF dependent pathways that are regulated through RAF functions independent of catalytic activity and their potential role as targets to block oncogenic RAS signalling. We focus on the now well documented roles of RAF kinase independent functions in apoptosis, cell cycle progression and cell migration.

Since fine powders tend strongly to adhesion and agglomeration, their processing with conventional methods is difficult or impossible. Typically, in order to enable the handling of fine powders, chemicals are added to increase the flowability and reduce adhesion. This contribution shows that instead of additives also vibrations can be used to increase the flowability, to reduce adhesion and cohesion, and thus to enable or improve processes such as precision dosing, mixing, and transport of very fine powders. The methods for manipulating powder properties are described in detail and prototypes for experimental studies are presented. It is shown that the handling of fine powders can be improved by using low-frequency, high-frequency or a combination of low- and high-frequency vibration.

Global agriculture has been forced to increase food production to feed the growing human population, while confronting various environmental obstacles such as global warming, resistance to pathogens, and constraints on arable land caused by soil salinity, drought, rising sea level, saltwater intrusion, and urbanization. Regarding abiotic stresses, salinity is a worldwide problem for agricultural production. Many efforts, therefore, have been made to cope with the environmental challenges, however, the progress of salinization, which is mainly caused and accelerated by anthropogenic activities, is likely faster than our progress in finding ways to deal with this problem. In addition, drought represents a global threat to the production of major crops. In addition, pests and pathogens cause significant crop losses and diminish global food security. Among the various strategies that have been investigated and applied in plant science, antimicrobial peptides derived from plants have caught widespread attention from scientists since these peptides exhibit beneficial biological activities. In agricultural science, there have been reports on the roles of antimicrobial peptides with active properties against biotic and abiotic stresses. Non-specific plant lipid transfer proteins, thionins, systemins, defensins, cyclotides, and heveins-like antimicrobial peptides are common antimicrobial peptides that have been found to be involved in the defense system against fungi and insect pests. Based on their potential ability to protect crops from pests, bacteria, and pathogenic fungi, the use of antimicrobial peptide genes in creating transgenic plants has been largely conducted during the last decades, and these studies have obtained positive results against the growth of fungi and bacteria. This review will focus on the latest progress in studies of antimicrobial peptides related to biotic and abiotic stress tolerance in plants. We will also update the current progress in the development of antimicrobial peptide-based transgenic crops.

The main source of electricity worldwide stems from fossil fuels, contributing to air pollution, global warming, and associated adverse effects. This study explores wind energy as a potential alternative. Nevertheless, the variable nature of wind introduces uncertainty in its reliability. Thus, it is necessary to identify an appropriate machine learning model capable of reliably forecasting wind speed under various environmental conditions. This research compares the effectiveness of artificial neural networks (ANN) and convolutional neural networks (CNN) in predicting wind speed across three locations in South Africa, characterised by different weather patterns. Empirical results show that CNN outperforms ANN in accurately forecasting wind speed under different weather conditions. This superiority is likely due to the inherent architectural attributes of CNNs, including feature extraction capabilities, spatial hierarchy learning, and resilience to spatial variability. These results could be useful to decision-makers in the energy sector.

This research concerns in to understand the link between urban heat and cool island, the Local Climatic Zones (LCZ) and atmospheric systems during the winter season in the city of Balneário Camboriú, Southern Brazil. To collect meteorological data on urban environmental, 11 permanent points in the Balneário Camboriú metropolitan region were installed. To understand the atmos-pheric systems operating in the region, a synoptic analysis of the dates was performed, and then, the LCZs map created for the city in World Urban Database and Acess Portal Tools was used to cor-relate the magnitudes of the heat and cool islands found in Balneário Camboriú in the winter period. The results indicate that the increasing verticalization with the construction of skyscrapers in Balneário Camboriú has a significant influence on local conditions for the occurrence of heat and cold islands. The findings indicate that LCZs with sparsely distributed buildings (LCZs 6, 8 and 9) and LCZs with dense vegetation (LCZ A) have lower intensity magnitudes of heat and cool con-ditions. The biggest magnitudes of heat and cool islands were reported in LCZs 1 and 3 during the timeframe. The synoptic analysis supports earlier researches that points to atmospheric stability (Anticyclonic domain) as a favorable atmospheric setting for the emergence of urban hear and coolness islands.

Among the leading immersive technologies, Augmented Reality is one of the most promising and empowering to support designers in production environments. This research investigates the application of mobile augmented reality, based on the Web, as a mediation tool focused on cognitive activities of reading and understanding of Technical Drawings in the production and assembly for Tailor Made projects of the scenographic industry. In this context, the research presents a method to use the WebAR to improve the reading of technical drawings, seeking efficiency on the visualization of models and the exchange of information between professionals, involved in the processes of design, production and assembly of products, in the scope of scenography. This mediation tool was developed using Web AR platforms, compatible with native libraries (ARCore and ARKit) to ensure, first, compatibility with commonly used devices that workers or businesses can access, and secondly, to leverage hybrid tracking techniques that combine vision and sensors to improve the reliability of augmented reality viewing. The proposed solution adopts multiple tracking and navigation techniques in order to expand Space Skills components to provide greater exploratory freedom to users. The research process took place in the light of the Design Science Research Methodology and the DSR-Model, since it aimed to develop a solution to a practical problem, as well as to produce knowledge from this process. Field experiments were conducted in two real companies, with end users on their respective mobile devices, in order to evaluate usability and behavioral intent, through the Acceptance, Intent and Use of Technology questionnaires; and perceived mental workload, NASA-TLX. The experimental results show that the adoption of this tool reduces the cognitive load in the process of reading technical drawings and project´s understanding. In general, it´s usability and intent to use provide significant levels of satisfaction, being positively accepted by all participants involved in the study.

The synthesis and structural characterization of a new triangular Cu3-3OH pyrazolato complex of formula, [Cu3(μ3-OH)(pz)3(Hpz)3][BF4]2 (1-Cu3), Hpz = pyrazole, is presented. The triangular unit forms a quasi-isosceles triangle with Cu-Cu distances of 3.3739(9), 3.3571(9), and 3.370(1) Å. This complex is isostructural to the hexanuclear complex [Cu3(μ3-OH)(pz)3(Hpz)3](ClO4)2]2 (QOPJIP). A comparative structural analysis with other reported triangular Cu3-3OH pyrazolato complexes has been done, showing that, depending on the pyrazolato derivative, auxiliary ligand or counter-anion can affect the nuclearity and/or the dimensionality of the system. The magnetic properties of 1-Cu3 are analyzed by experimental data and DFT calculation. A detailed analysis is done on the magnetic properties comparing experimental and theoretical data of other molecular triangular Cu3-3OH complexes, showing that the displacement of the μ3-OH- from the Cu3 plane, together with the type of organic ligands, influences the nature of the magnetic exchange interaction between the spin-carrier centers, since it affects the overlap of the magnetic orbitals involved in the exchange pathways. Finally, a detailed comparison of the magnetic properties of 1-Cu3 and QOPJIP was done, which allowed us to understand the differences in their magnetic properties.

Trans fatty acids (TFA) are a concern for public health due to their negative impact on cardiovascular health. This study aimed to assess the levels of TFA and other fatty acids in popular edible oils and fried foods commonly consumed in Tanzania. A total of 57 samples from 38 brands of edible oils and 20 samples of fried street foods and fast foods were collected in Dar es Salaam, Tanzania. Capillary gas chromatography was used to determine TFA levels, while nutritional labeling and other fatty acid classes were also evaluated. Among the analyzed edible oils, 21% exceeded the recommended TFA levels, primarily found in popular brands of margarine, industrially refined sunflower oils, animal butter, and peanut butter. Only two food items surpassed the 2% TFA limit, but a majority of the foods had high levels of saturated fatty acids and a fatty acid profile similar to palm oil. Additionally, only 22% of the edible oils provided TFA content information. These findings indicate the persistence of TFA levels beyond recommended limits and inadequate TFA nutritional labeling in Tanzanian food products. Urgent interventions are necessary to reduce TFA levels and improve nutritional labeling practices to safeguard public health.

Development of early math skills is linked to future success in mathematics and other academics. Educational videogames have been shown to promote academic achievement; however, few rigorous studies have evaluated the use of educational videogames in supporting math development, especially in early primary education. In the current study, an open-label randomized controlled trial was conducted involving 134 first grade students to determine, using standardized assessments, the impact of the educational mathematics tablet-based videogame, Knowledge Battle, on math scores and self-competency. Overall, Knowledge Battle did improve math skills in participants who played the game. Among those with lower pre-game math skills, the Knowledge Battle group’s mean math score increased more than the control group’s mean math score (9.7 vs. 6.0; p=0.02). There was no association between perceived sense of self-competency and total math score (p=0.8141). However, players who had a higher sense of self-competency were more likely to enjoy playing the game. In conclusion, our findings suggest that Knowledge Battle was an acceptable and enjoyable educational mathematical videogame for first grade students, and may be most impactful for those with low math skills.

Changes in land-use have been observed in banana-based systems in the African Great Lakes region affected by Xanthomonas wilt disease (XW) of banana. Through participatory focus group discussions (FGDs) and the 4-cell method, changes in land-use were retrospectively assessed in 13 XW-affected landscapes/villages along a 230 km transect from Masisi (XW arrived in 2001) to Bukavu (XW arrived around 2014) in eastern Democratic Republic of Congo during 2015. The four-cell chart ranked land-use by mapping the area under production and the number of households involved in production. Farmers’ perceptions on the sustainability of new land-uses were also documented. Soil nutrient content and erosion levels were measured for five major land-use options/ trajectories on 147 fields across 55 farms in three landscapes along the transect. From being ranked the most important crop (92% of landscapes i.e. produced on large areas of land and by many households) before XW outbreaks, its importance had declined with most households in 36% of the landscapes growing it on smaller farms while in 64% of cases by few households on smaller pots. Farmers uprooted entire banana mats or fields, expanding land under other crops, mainly beans, taro, sweet potato, cassava, maize, coffee and eucalyptus. Species richness did not change at landscape level, though 21 crops were introduced at farm level. Land-use for banana is however still perceived to be more sustainable due to its multi-functional roles. Soils under banana plots were found in general to be better in their chemical attributes while high erosion levels (Mg ha-1 year-1) were observed under cassava (1.7-148.9) compared with banana (0.3-10.7) and trees (0.3-5.9). The current shift away from banana could thus have profound effects on supply of key services and sustainability of the production systems. This study offers a good basis/entry point for interventions in the XW-affected landscapes.

The most important predictors for outcomes after ischemic stroke, that is, for health deterioration and death, are chronological age and stroke severity; gender, genetics and lifestyle / environmental factors also play a role. Of all these, only the latter can be influenced after the event, even though recurrent stroke may be prevented by antiaggregant/anticoagulant therapy, angioplasty of high-grade stenoses, and treatment of cardiovascular risk factors. Moreover, blood cell composition and protein biomarkers such as C-reactive protein or interleukins in serum are frequently considered as biomarkers of outcome. We surveyed protein biomarkers that were reported to be predictive for outcome after ischemic stroke, specifically considering biomarkers that predict long-term outcome (≥3 months) and that are measured over the first days following the event. We classified the protein biomarkers as immune‑inflammatory, coagulation-related, and adhesion-related biomarkers. Some of these biomarkers are closely related to cellular senescence and, in particular, to the inflammatory processes that can be triggered by senescent cells. Moreover, the processes that underlie inflammation, hypercoagulation and cellular senescence connect stroke to cancer, and biomarkers of cancer-associated thromboembolism, as well as of sarcopenia, overlap strongly with the biomarkers discussed here. Finally, we demonstrate that most of the outcome-predicting protein biomarkers form a close-meshed functional interaction network, suggesting that the outcome after stroke is partially determined by an interplay of molecular processes relating to inflammation, coagulation, cell adhesion and cellular senescence.

Coral reefs are declining worldwide due to global changes in the marine environment. The increasing frequency of massive bleaching events in the tropics is highlighting the need to better understand the stages of coral physiological responses to extreme conditions. Moreover, like many other coastal regions, coral reef ecosystems are facing additional localized anthropogenic issues such as nutrient loading, increased turbidity, and coastal development. Different strategies have been developed to measure the health status of a damaged reef, ranging from the resolution of individual polyps to an entire coral community, but techniques for measuring coral physiology in situ are not yet widely implemented. For instance, while there are many studies of the coral holobiont response in single or limited-number multiple stressor experiments, they provide only partial insights to metabolic performance under more complex temporally and spatially variable natural conditions. Here, we discuss the current status of coral reefs and their global and local stressors in the context of experimental techniques that measure core processes in coral metabolism (respiration, photosynthesis, and biocalcification) in situ, and their role in indicating the health status of colonies and communities. We highlight the need to improve the capability of in situ studies in order to better understand the resilience and stress response of corals under multiple global and local scale stressors.

β₂-m, β₂-microglobulin; CAF, cancer associated fibroblast; CSC, cancer stem cell; CTL, cytotoxic T lymphocyte; DC, dendritic cell; ECM, extracellular matrix; EGF-R, epidermal growth factor receptor; ER, endoplasmic reticulum; FDA, Food and Drug Administration; HLA, human leukocyte antigen; HNSCC, head and neck squamous cell carcinoma; HPV, human papilloma virus; ICP immune checkpoint; ICPi, immune checkpoint inhibitor; IFN, interferon; LMP, low molecular weight protein; mAb, monoclonal antibody; MDSC, myeloid-derived suppressor cell; mTOR, mammalian target of rapamycin; MSI, multispectral imaging; NK, natural killer; OS, overall survival; PBL, peripheral blood lymphocytes; PBMNC, peripheral blood mononuclear cells; PD1, programmed death receptor 1; PD-L1, programmed death ligand 1; PFS, progression-free survival; PI3K, phosphatidyl-linositol-3-kinase; R/M, recurrence and or metastatic; STAT, signal transducer and activator of transcription; TAA, tumor-associated antigen; TAM, tumor associated macrophages; TAP, transporter associated with antigen processing; TCR, T cell receptor; TIL, tumor-infiltrating lymphocyte; TLS, tertiary lymphoid structure; TME, tumor microenvironment; Treg, regulatory T cell; TSA, tumor-specific antigen; VEGF, vascular endothelial growth factor; VEGF-R, vascular endothelial growth factor receptor.

Remote sensing (RS) has been widely adopted as a tool to investigate several biotic and abiotic factors, directly and indirectly, related to biodiversity conservation. European grasslands are one of the most biodiverse habitats in Europe. Most of these habitats are subject to priority conservation measure, and they are threatened by several human induced process. The broad expansions of few dominant species are widely reported as drivers of biodiversity loss. In this context, using Sentinel-2 (S2) images, we investigate the distribution of one of the most spreading species: <i>Brachypodium genuense</i>. We performed a binary Random Forest (RF) classification of <i>B. genuense</i> using a RS image and field sampled presence/absence points. Then, we integrate the occurrences obtained from RS classification into niche models to identify the topographic drivers of <i>B. genuense</i> distribution. Lastly, the impact of <i>B. genuense</i> distribution in the N2k habitats was assessed by overlay analysis. The RF classification process detected <i>B. genuense</i>'s cover with an overall accuracy of 91.18%. The integration of RS and topographic niche models shows that the most relevant topographic variables that influence the distribution of <i>B. genuense</i> are slope, elevation, solar radiation and Topographic Wet Index (TWI) in order of importance. The overlay analysis shows that 74.04% of the <i>B. genuense</i> identified in the study area falls on the semi-natural dry grasslands. The study highlights the importance of the RS classification and the topographic niche models as an integrated approach for mapping a broad-expansion species such as <i>B. genuense</i>. The coupled techniques presented in this work should be applicable to other plant communities with remotely recognizable characteristics for more effective management of N2k habitats.

Abstract: COVID-19 in 2020 brought challenges to the Brazilian public health system with an emerging virus with respiratory contagion called SARS-CoV-2. There are few studies in Brazil and in some countries, on the increased incidence of certain viral respiratory infections, includ-ing H1N1 and coronavirus and their association with low levels of vitamin D, zinc and iron. The aim of this study was to demonstrate that the deficit of vitamin D, zinc and iron has an impact on the infectious process of patients with COVID-19 and to establish new forms of prevention for the worsening of COVID-19 in the human body. Data were collected from medical records and test results from patients being followed up during the treatment period for COVID-19. Patients with low blood levels of vitamin D, zinc and iron during the treatment period of COVID-19 had a higher percentage of worsening and complications requiring hospitalization in intensive care beds. The ingestion of vitamin D, zinc and iron in the treatment period of patients with COVID-19 in addition to being an immunological protector against SARS-CoV-2 and alleviating the process of worsening the disease can also act as a biomarker in cases of this disease.

In order to monitor the diversity of terrestrial biomes, the Earth Exploration Satellite Services demand a high data rate for downlink transmissions while sharing their frequency spectrum with, and suffering interferences from, cellular Base Stations. Both highlight the dilemmas of spectral efficiency (bps/Hz) and spectral coexistence. Our research aims to mitigate interference on low orbit satellite downlinks using Cognitive Radio (CR) and Adaptive MODulation and CODing (MODCOD) techniques. To fulfill this: 1) we present CR approaches to enhance spectrum exploitation. Next, 2) we detail Adaptive MODCOD (ACM) technique to increase RF power and spectral efficiencies. Then, 3) we suggest the solution by combining 1) and 2). Afterwards, 4) we analyze it by monitoring the signal to interference plus noise ratio and the CR/MODCOD strategy. Finally, 5) we provide case studies to demonstrate the strategy’s effectiveness through the practical operation of satellite services, and 6) we conduct a bench test of the communication system.

Gastric cancer (GC) is a highly heterogeneous, complex disease and the fifth most common cancer worldwide (about one million cases and 784 000 deaths worldwide in 2018). CG is lately diagnosed and guarantees a poor prognosis for GC (the 5-year survival rate is less than 20%, but in early detection can reach 90%). This study evaluated the transcriptional profile in tumor gastric samples to find genes highly expressed during tumor establishment and use the related proteins as targets to find new anticancer molecules. Data was collected at Gene Expression Omnibus (GEO) bank to obtain 3 dataset matrices that analyze gastric tumor tissue versus normal gastric tissue, performed microarray using GPL570 platform, and from different sources. The genes found in silico analysis were confirmed in several lines of GC cells by RT-qPCR. The protein data bank was used to find the correspondent proteins. Then a structural-based virtual screening was done to find molecules, and docking analysis was done using the DockThor server. Our results of transcriptomic analysis, together with RT-qPCR, confirm the high expression of the genes AJUBA, FBXL13, CCDC69, CD80 and NOLC1 in GC lines. Based on that, the correspondent proteins were used in SBVS analysis. Five molecules, one each target, MCULE-2386589557-0-6, MCULE-7343047040-0-1, MCULE-5230409338-0-3, MCULE-9178344200-0-1 and MCULE -5881513100-0-29. All molecules have favorable pharmacokinetic, pharmacodynamic and toxicological properties. Molecular docking analysis revealed that the molecules interact with proteins in critical sites for their activity. Using a virtual screening approach, a molecular docking study was performed for proteins encoded by genes that play important roles in cellular functions for carcinogenesis. Combining a systematic collection of public microarray data with a comparative meta-profiling, RT-qPCR, SBVS, and molecular docking analysis provided a suitable approach to find genes involved in GC and work the correspondent protein to strive for new molecules with anticancer properties.

The aim of the instant study was to evaluate relative inline progesterone dynamic changes according to parity and status of reproduction and to estimate the relationship with productivity in dairy cows by inline milk analysis system (IMAS) Herd Navigator. According to a progesterone assay, cows were divided into three periods: postpartum, after insemination, and pregnancy. In the first stage of the postpartum period (0-29 days), the progesterone level in milk was monitored every 6 days. The second stage of the postpartum period (30-65 days) lasted until cows were inseminated. In the third period (0-45 days) after cows were inseminated, progesterone scores were distributed according to whether or not cows became pregnant. The stability of progesterone dynamics was monitored in the last study period (45-90 days). For milk progesterone detection, the fully automated real-time progesterone analyzer Herd Navigator (Lattec I/S. Hillerød. Denmark) was used in combination with a DeLaval milking robot (DeLaval Inc., Tumba, Sweden). The highest progesterone concentration in multiparous cows ranged from 1.08% (11-17 days postpartum) to 34.89% higher than that in cows of the first parity. The lowest progesterone concentrations in the milk of all cows were estimated during the first 5 postpartum days and between 18 and 23 days after calving. Peak milk progesterone concentrations were evaluated in the first stage of the experiment on days 24-29 after calving. In the 30-65-day period after calving, the level of milk progesterone was 2.02-2.08 times higher than that in the 24-29-day postpartum period. After insemination, the level of progesterone in milk increased by 10.77-22.54% compared with the level from cows on days 30-65 after calving. A higher (12.88%) concentration of progesterone in milk was evaluated in multiparous cows compared with that from cows of the first parity. In pregnant cows, milk progesterone within 0-45 days after insemination was 23.88% (in multiparous cows) and 32.54% (in primiparous cows) higher than that in non-pregnant cows. On days 31–35 after insemination, pregnant cows had higher milk progesterone levels, which can predict pregnancy success. According to our study results, we can suggest that an inline progesterone concentration determined by inline milk analysis system Herd Navigator and changes in its dynamics correlate with different reproductive statuses and milk yield of cows. Pregnant cows 11–15 days after insemination have higher milk progesterone levels, what positively, associated with a successful pregnancy.

Results are presented concerning the influence on the water splitting process of enantiopure tartaric acid present in bulk solution. Stainless steel and electrodeposited nickel are used as working electrode (WE) surface. The latter is obtained by electrodeposition on the two poles of a magnet. The influence and role played by the chiral compound in solution has been assessed by comparing the current values, in cyclic voltammetry (CV) experiments, recorded in the potential range at which oxygen evolution reaction (OER) occurs. In the case of tartaric acid and nickel WE a spin polarization of about 4 % is found. The use of the chiral environment (bulk solution) and ferromagnetic chiral Ni electrode allows for observing the OER at a more favourable potential: about 50 mV (i.e. a cathodic, less positive, shift of the potential at which the oxygen evolution is observed).

Understanding African swine fever virus (ASFV) transmission is essential for strategies to minimize virus spread during an outbreak. ASFV can survive for extended time periods in animal products, carcasses, and the environment. While ASFV genome was found in the environment around infected farms, data on the virus survival in soil are scarce. We investigated different soil matrices spiked with ASFV-positive blood from infected wild boar to see if ASFV can remain infectious in the soil beneath infected carcasses. As expected, ASFV genome detection was possible over the entire sampling period. Soil pH, structure, and ambient temperature played a role for the stability of infectious ASFV. Infectious ASFV was demonstrated in specimens originating from sterile sand for at least three weeks, from beach sand for up to two weeks, from yard soil for one week, and from swamp soil for three days. Virus was not recovered from two acidic forest soils. All risk mitigation experiments with citric acid or calcium hydroxide resulted in complete inactivation. In conclusion, stability of infectious ASFV is very low in acidic forest soils but rather high in sandy soils. However, given the high variability, treatment of carcass collection points with disinfectants should be considered.

A Pacific brittle star Ophiura sarsii has previously been shown to produce a chlorin (3S,4S)-14-Ethyl-9-(hydroxymethyl)-4,8,13,18-tetramethyl-20-oxo-3-phorbinepropanoic acid (ETPA) (1) with potent phototoxic activities making it applicable to photodynamic therapy. Using extensive LC-MS metabolite profiling, molecular network analysis and targeted isolation with de novo NMR structure elucidation, we here identify five additional chlorin compounds from O. sarsii and its deep-sea relative O. ooplax: 10S-Hydroxypheophorbide a (2), Pheophorbide a (3), Pyropheophorbide a (4), (3S,4S,21R)-14-Ethyl-9-(hydroxymethyl)-21-(methoxycarbonyl)-4,8,13,18-tetramethyl-20-oxo-3-phorbinepropanoic acid (5), and (3S,4S,21R)-14-Ethyl-21-hydroxy-9-(hydroxymethyl)-4,8,13,18-tetramethyl-20-oxo-3-phorbinepropanoic acid (6). Chlorins 5 and 6 have not been previously reported in natural sources. Interestingly, low amounts of chlorins 1-4 and 6 could also be identified in a distant species, the basket star Gorgonocephalus cf. eucnemis, demonstrating that chlorins are produced by a wide spectrum of marine invertebrates of the class Ophiuroidea. Following purification of these major Ophiura chlorin metabolites, we discovered the high singlet oxygen quantum yield upon their photoinduction and their strong phototoxicity against a panel of cancer cell lines. These studies identify an arsenal of brittle star chlorins as powerful natural photosensitizers with potential photodynamic therapy applications.

Inflorescence architecture underpins sexual reproduction in wild Musa species and productivity in edible banana cultivars. In a functional analysis we identified the apical inflorescence and lateral ‘cushion’ meristems and the change in flower type as the three primary components of inflorescence architecture. Five genotypes of two clone-sets of edible plantains (Musa AAB), were grown for four generations along an elevation gradient (1100 m to 2200 m, 16°C to 24°C) straddling the equator in the humid highlands of East Africa. The data consisted of peduncle length at harvest, fruit per hand (Fh) and hands per bunch (Hb). The activity of the apical inflorescence meristem drives peduncle length and lateral ‘cushion’ meristems determine fruit per hand. However, Hb is determined by a change in flower type – from fruit-forming to non-fruit forming. Site temperature affected Hb more than Fh, while development of the genet (rhizome) changed the allocation of resources between Hb and Fh, independently of the effect of site temperature. Clone-sets differed in their response to genet development. Cooler temperatures reduced the number of fruit-forming flowers in an inflorescence and changed the balance away from female towards male flowers. In banana breeding schemes, manipulating inflorescence components independently raises options for producing genotypes better suited to markets, environments, and cultural practices.

Once considered relatively benign, superficial vein thrombosis (SVT) of the lower limbs is often linked to deep vein thrombosis (DVT) or pulmonary embolism (PE). Treatment goals include alleviating local symptoms and preventing SVT from recurring or extending into DVT or PE. Fondaparinux 2.5 mg once daily for 45 days is the treatment of choice for most patients with SVT. Potential alternatives include intermediate-dose low-molecular-weight heparin or the direct oral factor Xa inhibitor rivaroxaban. Despite these treatment options, significant gaps remain, including the role of systemic or topical anti-inflammatory agents alone or combined with anticoagulants, and the optimal duration of anticoagulation for patients at varying risk levels. Additionally, the efficacy and safety of factor Xa inhibitors other than rivaroxaban, management of upper extremity SVT, and optimal treatment for SVT near the sapheno-femoral or sapheno-popliteal junctions are not well understood. This narrative review aims to summarize current evidence on anticoagulant treatment for SVT, highlight key unmet needs in current approaches, and discuss how ongoing studies may address these gaps.

Research on White Etching Cracks (WEC) apparent in multiple bearing applications has identified various drivers to cause them. Lubricants, Electricity combined with contact mechanics are proven to catalyze WEC significantly. However, none of them is solely causing WEC by its own, instead combinations discretize whether WEC appears or not. Hence, the WEC topic appears to be multidimensional, making WEC still unpredictable. The current paper is about a systematic study by the use of a DGBB test rig on how lubricant chemicals combined with electricity and by varying oil flow and pressure lead to WEC. It becomes evident, that even WEC critical conditions turn to be WEC free by simply increasing the oil flow and decrease the contact pressure.

Competency frameworks outline the perceived knowledge, skills and other attributes required for professional practice. Competency frameworks have gained in popularity, in part for their ability to inform health professions education, assessment, professional mobility, and other activities. Previous research has shown inadequate reporting within reports describing their development and that may jeopardize their use and application. We aimed to develop a set of minimum criteria that provides guidance to authors (and consumers) in an effort to improve reporting of the development of competency frameworks. The checklist was developed by a 35-member expert panel and a five-member research team following published guidance from the Enhancing the QUAlity and Transparency Of health Research (EQUATOR) Network. The final checklist contains 20 essential reporting items including guidance on reporting title and abstract, framework development, the development process, testing and funding/conflicts of interest. The intent of the COmpeteNcy FramEwoRk Development in Health Professions (CONFERD-HP) reporting guideline is to help readers (including researchers, educators, regulators, health professionals, and patients) develop a greater understanding of relevant terminology, core concepts, and key items to report for competency framework development in health professions.

Framed experiments and games are a useful medium to understand how context affects individual and group decision-making. They are particularly relevant for field research in agriculture, where alternative experimental designs can be costly and unfeasible. After a systematic review of the literature, we found that the volume of published studies employing coordination and cooperation games increased during the 2000-2020 period. In recent years, there has been greater attention given to natural resource management, conservation, and ecology areas, especially in strategic regions for agriculture sustainability. Other games, such as trust and risk games, have come to be regarded as standards of framed field experiments in agriculture. Regardless of sectoral focus, most games' results are subject to internal and external validity criticism. In particular, a significant portion of the games showed potential recruitment biases against women and no opportunities for a continued impact assessment. However, games' validity should be judged on a case-by-case basis. Specific cultural aspects of games might reflect the real context, and generalizing games' conclusions to different settings is often constrained by cost and utility. Overall, games in agriculture could benefit from more significant, frequent, and inclusive experiments and data – all possibilities offered by digital technology. Present-day physical distance restrictions may accelerate this shift. New technologies and engaging ways to approach farmers might represent a turning point for games in agriculture in the 21st century.

In recent years there has been an increasing interest in developing novel materials based on natural biopolymers as a renewable alternative of petroleum-based plastics. The availability of proteins derived from agricultural by-products, along with their favourable properties, has fostered a renewed interest in protein-based materials, promoting research in innovative technologies. In this study we propose the use of rapeseed protein-rich meal as main ingredient for the preparation of novel sustainable materials combining excellent environmental properties such as biodegradability and renewable origin. Application as sustainable products in the present high-tech society needs modification of basic native properties of these natural compounds. The original route proposed in this paper consists in the preparation via compression moulding of flexible biomaterials stabilized by crosslinkers/chain extenders. Investigation of the effects of different denaturing and disulfide bond reducing agents, crosslinkers, and preparation conditions on the material mechanical behaviour demonstrated that the novel materials have appreciable strength and stiffness. The results show the potential of utilizing full meal from vegetable by-products to prepare protein-based materials with granted ecofriendly characteristics and mechanical properties adequate to specific structural applications.

The importance of sleep for healthy brain function is widely acknowledged. However, it remains unclear how the internal generation of dreams might facilitate cognitive processes. In this perspective we review a computational approach inspired by artificial intelligence that proposes a framework for how dreams occurring during rapid-eye-movement (REM) sleep can contribute to learning and creativity. In this framework, REM dreams are characterized by an adversarial process that, against the dream reality, tell a discriminator network to classify the internally created sensory activity as real. Such an adversarial dreaming process is shown to facilitate the emergence of real-world semantic representations in higher cortical areas. We further discuss the potential contributions of adversarial dreaming beyond learning, such as balancing fantastic and realistic dream elements, and facilitating the occurrence of creative insights. We characterize non-REM (NREM) dreams, where a single hippocampal memory is replayed at a time, as serving a complementary role of improving the robustness of cortical representations to environmental perturbations. We finally explain how subjects can become aware of the adversarial REM dreams, but less of the NREM dreams, and how the awareness phenomenon of wake, dream and lucid dreaming may appear.

Frequent and excessive consumption of alcohol, be it episodic or sustained misuse, ranks among the top causes of mortality globally. This comprehensive analysis seeks to elucidate how alcohol misuse precipitates death, with a particular focus on associated cardiac anomalies. Notably, the phenomenon of "Holiday Heart Syndrome," linked to binge drinking, is recognized for inducing potentially fatal cardiac arrhythmias. Moreover, persistent alcohol consumption is implicated in the development of alcoholic cardiomyopathy, a condition that underlies heart failure and arrhythmic disturbances of the heart. Additionally, individuals undergoing withdrawal from alcohol frequently exhibit disruptions in normal heart rhythm, posing a risk of death. This review further delves into additional alcohol-related mortality factors, including the heightened likelihood of hypertension, cerebrovascular accidents (strokes), and the connection between excessive alcohol use and Takotsubo syndrome.

Abstract Background: Occipital neuralgia is a debilitating condition and traditional treatments often provide limited or temporary relief. Recently, ultrasound-guided hydrodissection of the greater occipital nerve (GON) has emerged as a promising minimally invasive approach. Objectives: To describe two novel ultrasound-guided hydrodissection with 5% dextrose for GON and discuss their advantages, disadvantages, and considerations. Methods: Two case reports are presented. Case 1 describes a lateral decubitus approach for hydrodissecting the GON between the semispinalis capitis (SSC) and obliquus capitis inferior (OCI) muscles. Case 2 details a cranial-to-caudal approach for hydrodissecting the GON within the SSC and upper trapezius (UT) muscles when the GON pass through these two muscles. Results: Both patients experienced significant and sustained pain relief with improvements in function and quality of life. Conclusions: Ultrasound-guided GON hydrodissection using 5% dextrose is a promising treatment for occipital neuralgia. The lateral decubitus and cranial to caudal approaches provide additional options to address patient-specific anatomical considerations and preferences.

It was the aim of this study to provide a more precise timeframe of development of the gonads and genital ducts in the equine fetus around the time of sexual differentiation. This included the identification and localisation of the primordial germ cell population. Equine fetuses between 45 and 60 days of gestation were evaluated using a combination of micro-computed tomography scanning, immunohistochemistry, and multiplex immunofluorescence. Fetal gonads increased in size by 23-fold from 45 to 60 days of gestation, paralleled by a greater increase in metanephros volume. Signs of mesonephros atrophy were detected during this time. Tubular structures of the fetal testes were present from day 50 onwards, whereas cell clusters dominated in the fetal ovary. The genital ducts were well-differentiated and presented a lumen in all samples. No sign of mesonephric or paramesonephric duct degeneration was detected. Expression of AMH was strong in the fetal testes but absent in ovaries. Irrespective of sex, primordial germ cells selectively expressed LIN28. Migration of primordial germ cells from the mesonephros to the gonad was detected at 45 days, but not at 60 days of development. Their number and distribution within the gonad were influenced (p&lt;0.05) by fetal sex. Most primordial germ cells (86.8 ± 3.2% in females and 84.6 ± 4.7% in males) were characterized as pluripotent according to co-localization with CD117. However, only a very small percentage of primordial germ cells was proliferating (7.5 ± 1.7% in females and 3.2 ± 1.2% in males) based on co-localization with Ki67. It can be concluded that gonadal sexual differentiation in the horse occurs asynchronously with regard to sex but already before 45 days of gestation.

Treatment of tendinopathies with multipotent mesenchymal stromal cells (MSCs) is a promising option in equine and human medicine. However, conclusive clinical evidence is lacking. The purpose of this study was to gain insight into clinical treatment efficacy and to identify suitable outcome measures for larger clinical studies. Fifteen horses with early naturally occurring tendon disease were assigned to intralesional treatment with allogeneic adipose-derived MSCs suspended in serum or with serum alone by block randomization (dosage adapted to lesion size). Clinicians and horse owners remained blinded to the treatment during 12 months (7 horses per group) and 18 months (7 MSC- and 5 control-group horses) of follow-up including clinical examinations and diagnostic imaging. Clinical inflammation-, lameness- and ultrasonography scores improved more over time in the MSC-group. The lameness score difference significantly improved in the MSC- compared to the control-group after 6 months. In the MSC-group, 5 out of 7 horses were free of re-injuries and back to training until 12 and 18 months. In the control-group, 3 out of 7 horses were free of re-injuries until 12 months. These results suggest that MSCs are effective for treatment of early phase tendon disease and provide a basis for a larger controlled study.

Unlike plants which have special gravity-sensing cells, such special cells in animals are yet to be discovered. However, microgravity, the condition of apparent weightlessness, causes bone, muscular and immune system dysfunctions in astronauts following spaceflights. Decades of investigations show correlations between these organ and system-level dysfunctions with changes induced at the cellular level both by simulated microgravity as well as microgravity conditions in outer space. Changes in single bone, muscle and immune cells include morphological abnormalities, altered gene expression, protein expression, metabolic pathways and signaling pathways. These suggest that human cells mount some response to microgravity. However, the implications of such adjustments on many cellular functions and responses are not clear. Here, we addressed the question whether microgravity induces alterations to drug response in cancer cells. We used both adherent cancer cells (T98G) and cancer cells in suspension (K562) to confirm known effects of microgravity and then treated the K562 cells with common cancer drugs (hydroxyurea and paclitaxel) following 48 hours of exposure to microgravity via a NASA-developed rotary cell culture system. Fluorescence-guided morphometry revealed microgravity-induced loss of the significant reduction (p &lt; 0.0l) to the nuclear to cytoplasm ratio of cancer cells treated with hydroxyurea. Our results call for more studies on impact of microgravity on cellular drug-response, in view of the growing need for space medicine, as space exploration grows.

Glioblastoma (GBM) is the most common primary brain tumor. Due to high resistance to treatment, local invasion, and high risk of recurrence, GBM patient prognoses are often dismal, with median survival around 15 months. The current standard of care is threefold: surgery, radiation therapy and chemotherapy with temozolomide (TMZ). However, patient survival has only marginally improved. Radioimmunotherapy (RIT) is a fourth modality under clinical trials and aims at combining immunotherapeutic agents with radiotherapy. Here, we develop in vitro assays for rapid evaluation of RIT strategies. Using a standard cell irradiator and an Electric Cell Impedance Sensor, we quantify cell migration following the combination of radiotherapy and chemotherapy with TMZ and RIT with durvalumab, a PD-L1 immune checkpoint inhibitor. We measure cell survival using a cloud-based clonogenic assay. Irradiated T98G and U87 GBM cells migrate significantly (p < 0.05) more than untreated cells in the first 20-40 hours post-treatment. Addition of TMZ increased migration rates for T98G at the 20 Gy (p < 0.01). Neither TMZ nor durvalumab significantly changed cell survival in 21 days post-treatment. Interestingly, durvalumab abolished the enhanced migration effect, indicating possible potency against local invasion. These results provide parameters for rapid supplementary evaluation of RIT against brain tumors.

In this study pH, temperature of the contents of the forestomach of cows and cow activity were measured using specific smaXtec boluses manufactured for animal care. Rumination time, body weight, milk yield, milk fat/protein ratio, milk lactose, milk somatic cell count, milk electrical conductivity and conception of concentrates were registered with the help of Lely Astronaut® A3 milking robots. The following parameters were obtained: base excess in blood, partial carbon dioxide pressure, partial oxygen pressure, bicarbonate, hydrogen potential, total carbon dioxide carbon, base excess in extracellular fluid, sodium, calcium, potassium, packed cell volume, chlorides, hemoglobin concentration and lactate. According to the concentration of lactose in milk, cows were grouped into two groups: group 1 - milk lactose &lt;4.70% (n = 20), group 2 - milk lactose ≥ 4.70% (n = 15). Data of cows were also divided by milk fat and protein ratio: F/P&lt;1.2 (class 1), F/P=1.2 (class 2) and F/P&gt;1.2 (class 3). According our results we can conclude that inline registered milk lactose concentration can be used as indicator for the health status of fresh dairy cows. Cows with higher lactose concentration (≥ 4.70%) developed more activity (54.47%) and had less risk of mastitis (lover milk EC, and SCC) and metabolic disorders according to F/P. Cows with higher lactose concentration showed higher glucose concentrations. Low level of lactose can be used as indicator of mastitis (milk SCC ≥ 100 thousand/ml) and metabolic disorders according to F/P.

The aim of the current study was to determine the effectiveness of two surgical techniques regarding the cow respiratory rates, heart rates, and rumination time using two sensors: an experimental device that was created by the Institute of Biomedical Engineering of Kaunas University of Technology (Lithuania) and the “SCR” (SCR Engineers Ltd., Netanya, Israel) system. The cows were divided into two groups: PA1—cows treated by percutaneous abomasopexy (n = 10), and RSO2—cows treated by right side omentopexy (n = 8). For the control group (KH), according to the principle of analogues (number of lactations, breed, and days in milk), we selected clinically healthy cows (n = 9). After the surgical treatment for the abomasal displacement, the experimental device was applied for the recording of the heart and breathing rates; 12 hour tracking of the rumination time (RT) was implemented using the system ''SCR''; and the body temperature was measured. After 12 hours, the blood was taken for biochemical and morphological tests. The experimental device recorded 12 hours of the respiratory rate (RR) and heart beat rate (HBR) information. We determined the concentrations of the blood serum beta-hydroxybutyrate (BHB), calcium (Ca), phosphorus (Phos), magnesium (Mg), and iron (Fe), as well as the activities of aspartarte aminotransferase (AST) and gamma-glutamyl transferase (GGT). According to searches for relationships between the traditional blood biochemical and morphological parameters, and the parameters measured by the experimental device, the more efficient abomasal displacement surgical method was the right side omentopexy. With the sensors, we found, after right side omentopexy, a 5.19 beats/min lower (1.10-times) average value of the respiratory rate, 1.13-times higher level of the heart rate, a 0.15 oC higher temperature, and a 3.29-times lower rumination time compared to the clinical healthy cows. Further research with larger numbers of animals and longer experimental periods are needed prior to practical applications.

Possibilities of utilization of two frequencies synthetic aperture radar (SAR) operating simultaneously in P-band and S or L-band are considered. Advantages of such system are shown. They are caused by improvement of data interpretation and by decrease of ionosphere influence. Tasks of surface and subsurface sensing by the complex SAR were under investigation for vegetation, soil covers are given. As an example, the investigation results of coniferous forest areas backscattering by the spaceborne P-band SAR together with L-band SAR in the September-February period are presented. Studies have shown that the joint use of the results in L and P bands offer unique opportunities to explore the effects of changes in the backscattering properties of forest surfaces.

Folk medicine is widely used in Angola, even for human African trypanosomiasis (sleeping sickness) in spite of the fact that the reference treatment is available for free. Aiming to validate herbal remedies in use, we have selected nine medicinal plants and assessed their antitrypanosomal ac-tivity. 122 extracts were prepared using different plant parts and solvents. 15 extracts from seven different plants exhibited in vitro activity against Trypanosoma brucei rhodesiense bloodstream forms >70% at 20 µg/ml. The dichloromethane extract of Nymphaea lotus (leaves and leaflets) and the ethanolic extract of Brasenia schreberi (leaves) had IC50 values ≤10 µg/ml. These two aquatic plants are of particular interest. They are being co-applied in the form of a decoction of leaves because they are considered by local healers as male and female of the same species, the ethnotaxon “longa dia simbi”. Bioassay-guided fractionation led to the identification of eight active molecules: gallic acid (IC50 0.5 µg/ml), methyl gallate (IC50 1.1 µg/ml), 2,3,4,6-tetragalloyl-glucopyranoside, ethyl gallate (IC50 0.5µg/ml), 1,2,3,4,6-pentagalloyl-β-glucopyranoside (IC50 20µg/ml), gossypet-in-7-O-β-glucopyranoside (IC50 5.5µg/ml), and hypolaetin-7-O-glucoside (IC50 5.7µg/ml) in B. schreberi, and 5-[(8Z,11Z,14Z)-heptadeca-8,11,14-trienyl] resorcinol (IC50 5.3µg/ml) not described to date in N. lotus. Five of these active constituents were detected in the traditional preparation. This work provides the first evidence for the ethnomedicinal use of these plants in the management of sleeping sickness in Angola.

The delineation of the clinical target volumes (CTVs) for radiation therapy is time-consuming, requires intensive training and shows high inter-observer variability. Supervised deep learning methods depend heavily on consistent training data, thus state-of-the-art research focuses on making CTV labels more homogeneous and strictly bounding them to current standards. International consensus expert guidelines standardize CTV delineation by conditioning the extension of the clinical target volume on surrounding anatomical structures. Training strategies that directly following the construction rules given in the expert guidelines or the possibility to quantify the conformance of manually drawn contours with the guidelines are still missing. 71 anatomical structures that are relevant for CTV delineation in head and neck cancer patients according to the expert guidelines were segmented on 104 CT scans to assess the possibility to automate their segmentation by state-of-the-art deep learning methods. nnU-Net models were trained to automatically segment those 71 structures on planning CT scans. We report the DICE, HD and sDICE for 71 + 5 anatomical structures for most of which no previous segmentation accuracies have been reported. For those structures, for that prediction values have been reported, our segmentation accuracy matched or exceeded the reported values. The predictions from our models were always better than those predicted by the TotalSegmentator. The sDICE with 2mm margin was larger than 80% for almost all structures. Individual structures with decreased segmentation accuracy are analyzed and discussed with respect to their impact on the CTV delineation following the expert guidelines. No deviation is expected to affect the rule-based automation of the CTV delineation.

Management practices must be developed to improve yam production sustainability. Image-based phenotyping techniques could help developing such practices based on non-destructive analyses of important plant traits. Our objective was to determine the potential of image-based phenotyping methods to assess traits relevant for tuber yield formation in yam grown in glasshouse and field. We took plant and leaf pictures with consumer cameras. We used the numbers of image pixels to derive the shoot biomass and the total leaf surface and calculated the ‘triangular greenness index’ (TGI) which is an indicator of the plant nitrogen (N) nutritional status. Under glasshouse conditions, the number of pixels obtained from nadir view (image taken top down) was positively correlated to the shoot biomass, and the total leaf surface, while the TGI was negatively correlated to the N content of diagnostic leaves. Under field conditions, pictures taken from the nadir view showed an increase in soil surface cover and a decrease in TGI with time. TGI was negatively correlated to SPAD measured on specific leaves but was not correlated to the N content of these leaves. In conclusion, these phenotyping techniques deliver relevant results but need to be further developed and validated for application in yam.

Progression of oral squamous cell carcinoma (OSCC) has been associated with an escape of tumor cells from the host immune surveillance with growing evidence of its underlying molecular mechanisms and its interaction with the immune cell control. In this study the expression of HLA class I (HLA-I) antigens and of components of the antigen processing machinery (APM) was analyzed in 160 consecutive human papilloma virus (HPV)-negative OSCC lesions and correlated to tumor specific parameters, the intratumoral immune cell response and to the patients outcome. A heterogeneous, but predominantly lower constitutive protein expression of HLA-I APM components was seen in OSCC sections when compared to non-neoplastic cells. Based on the expression levels of HLA-I APM components three main OSCC subgroups were detected and categorized into HLA-Ihigh/APMhigh, HLA-Ilow/APMlow and HLA-Idiscordant high/low/APMhigh phenotypes. In the HLA-Ihigh/APMhigh group, the highest frequency of intratumoral CD8+ T cells and lowest number of CD8+ T cells close to FoxP3 cells was found. Despite being associated with the highest T cell infiltration, patients within this group presented the most unfavorable survival, which was most evident in stage T2 tumors. Thus, the presented findings strongly indicate the presence of additional factors involved in the immunomodulatory process of HPV-negative OSCC with a possible tumor-burden-dependent complex network of immune escape mechanisms beyond HLA-I/APM components and T cell infiltration in this tumor entity.

Seeds of Arazá and Acai, in addition to the byproduct of the Sacha inchi seed, after the extraction of the oil known as Sacha Inchi oil press-cake (SIOPC), are considered wastes and often discarded; however, they have valuable potential as sources of nutrients and bioactive compounds. We aimed to analyze, the bromatological, and chemical composition of these three byproducts of the fruit industry. Further cytotoxic, antioxidant, and antihypertensive activities of extracts ethanol: water were evaluated through in vitro tests. The Bromatological test showed that SIOPC had a low protein content (8.1%), while AS had a high fiber content (48.9%), however, were poorest in nutrients Ethanol: water extracts from all seeds exhibited diverse profiles of secondary metabolites, with significant concentrations of polyphenols (155.88 µg gallic acid/100 mg dry weight), flavonoids (411.69 µg quercetin/100 mg dry weight), and carotenoids in AS (43.66 µg ß-carotene/100 mg dry weight). AS and ACS extracts excelled in ABTS and DPPH radical scavenging assays, and AS showed high α-glucosidase inhibition, previously unreported in the literature. The results suggest that both seeds and extracts are sources of nutritional and bioactive metabolites with high antioxidant and hypoglycemic activity. that could be used in the food industry and the health sector. These by-products underline the importance of sustainable harnessing these sources of the native Amazonian Region

Additive Manufacturing (AM) Direct Laser Fabrication (DLF) of Ti-5Al-5V-5Mo-3Cr (Ti5553) is being developed as a method for producing aircraft components. The additive manufacturing process can produce flaws near the surface, such as porosity and material voids, which act as stress raisers, leading to potential component failure. Eddy current testing was investigated to detect flaws on or near the surface of DLF Ti5553 bar samples. For this application, the objective was to develop an eddy current probe capable of detecting flaws 500 µm in diameter, located 1 mm below the component's surface. Two initial sets of coil parameters were chosen: The first, based on successful experiments that demonstrated detection of a near surface flaw in Ti5553 using a transmit-receive array probe, and the second, derived from simulation by Finite Element Method (FEM). An optimized transmit receive coil design, based on the FEM simulations, was constructed. The probe was evaluated on Ti5553 samples containing sub-surface voids of the target size, as well as samples with side-drilled holes and samples with holes drilled from the opposing inspection surface. The probe was able to effectively detect 80% of the sub-surface voids. Limitations included the probe’s inability to detect sub-surface voids near sample edges and a sensitivity to surface roughness, which produces local changes in lift-off. Multifrequency mixing improved signal-to-noise ratio when surface roughness was present on average by 22%. A probe based on that described in this paper could benefit quality assurance of additively manufactured aircraft components.

The polyomaviruses are small, non-enveloped DNA tumor viruses that cause serious disease in immunosuppressed people, including progressive multifocal leukoencephalopathy (PML) in patients infected with JC polyomavirus, but the molecular events mediating polyomavirus entry are poorly understood. Through genetic knockdown approaches, we identified phosphoinositide 3’ kinase γ (PI3Kγ) and its regulatory subunit PIK3R5 as cellular proteins that facilitate infection of human SVG-A glial cells by JCPyV, but not by adenovirus, an unrelated small, non-enveloped DNA tumor virus. PI3Kα appears less important for polyomavirus infection than PI3Kγ. CRISPR/Cas9-mediated knockout of PIK3R5 or PI3Kγ inhibited infection by authentic JCPyV and by JC pseudovirus. PI3Kγ knockout also inhibited infection by BK and Merkel Cell pseudoviruses, other pathogenic human polyomaviruses, and SV40, an important model polyomavirus. Reintroduction of the wild-type PI3Kγ gene into the PI3Kγ knock-out SVG-A cells rescued the JCPyV infection defect. Disruption of the PI3Kγ pathway did not block binding of JCPyV to cells or virus internalization, implying that PI3Kγ facilitates some intracellular step(s) of infection. These results imply that agents that inhibit PI3Kγ signaling may have a role in managing polyomavirus infections.

Samples of sunflower Waste Cooking Oils (WCOs) subjected to several cycles of frying were treated with water under four different combinations of temperature and pH. The variation of the chemical composition of the oil samples was monitored through headspace Solid-Phase Microextraction (HS-SPME) coupled with gas-chromatographic technique (GC), ¹H NMR spectroscopy and ESI⁺ mass spectrometry measurements. The possibility to modify the chemical composition of the recycled vegetable oil by tuning the water treatment parameters was exploited for the designing of a mini-plant for the production of bio-lubricants. A full description of the proposed prototype is also reported.

Plants produce a diverse portfolio of sesquiterpenes that are important in their response to herbivores and the interaction with other plants. Their biosynthesis from farnesyl diphosphate depends on the sesquiterpene synthases. Here, we investigate to what extent metabolic pathways can be reconstructed just from knowledge of the final product and the reaction mechanisms catalyzed by sesquiterpene synthases. We use the software package MedØlDatschgerl (MØD) to generate chemical networks and elucidate pathways contained in them. As examples, we successfully consider the reachability of the important plant sesquiterpenes β-caryophyllene, α-humulene, and β-farnesene. We also introduce a graph database to integrate simulation results with experimental biological evidence for selected predicted sesquiterpenes biosynthesis.

The integration of digital technologies into construction practices has emerged as a pivotal area of interest, reflecting its substantial influence on the future trajectory of the construction industry. This study undertakes a comprehensive bibliometric analysis of literature on construction digitalization spanning from 2013 to 2023, sourced from the Elsevier Scopus database. Employing key terms such as "construction digitalization," "BIM," "construction 4.0," and "digital construction methodologies," the research methodically extracts and scrutinizes relevant articles. Advanced tools like the VOS viewer were utilized to delve into the bibliometric networks, offering insights into prevailing research trends within the built environment sector. The findings reveal a pronounced emphasis on digital modeling, automation, blockchain technologies, and emerging paradigms such as smart contracts and modular construction. This investigation enriches the academic discourse by elucidating the varied subtleties, ongoing shifts, and prospective directions in the ever-evolving landscape of construction digitalization research.