The study investigates the determinants of mobile Internet banking adoption among Gen-Y in Malaysia. Align the issue of the study and research objectives, and the study underpinned Technology Acceptance Model (TAM) as the main guideline or a blueprint to analyze the research model. The study applied survey research design and analyzed using Structural Equation Modelling (SEM) under the PLS-SEM technique with SmartPLS 2.0. A total of 358 mobile internet banking users in Malaysia were random proportional selected as respondents and analyzed. Results from the partial least square structural equation modeling (PLS-SEM) revealed that perceived ease of use, perceived usefulness, facilitating condition, and personal innovativeness in IT have significantly influenced the attitude of mobile internet banking adoption in Malaysia. Additionally, perceived ease of use and facilitating conditions found to have a significant influence on the perceived usefulness of Mobile Internet Banking. Lastly, facilitating conditions and personal innovativeness in IT are significantly influence the perceived ease of use of mobile internet banking among Gen-Y in Malaysia

More than 90% of patients affected by mastocytosis are characterized by a somatic point mutation of c-KIT, which induces ligand-independent activation of the receptor and downstream signal triggering, ultimately leading to mast cell proliferation and survival. The most frequent mutation is c-KIT p.D816V, but other rarer mutations can also be found. These mutations often have a very low variant allele frequency (VAF), well below the sensitivity of common next-generation sequencing (NGS) methods used in routine diagnostic panels. Highly sensitive methods are developing for detecting mutations. This review summarizes the current indications on the recommended methods and on how to manage and interpret molecular data for the diagnosis and follow-up of patients with mastocytosis.

Ganoderic Acid (GA), a major bioactive compound isolated from an oriental medicinal mushroom, i.e. Ganoderma tsugae, has traditionally been found to have significant medicinal properties. As a result of GA's poor solubility in water, formulation poses several challenges. Additionally, the traditional method of administering it via alcohol always results in unfavorable patient side effects. In order to overcome these problems, Ganoderma Tsugae extracts obtained by ethanol extraction were encapsulated in nanodispersions by ultrasonic cavitation and solvent evaporation to maximise bioavailability. Resultant nanodispersions contained Ganoderic acid in a hydrophobic core with a mean particle size of no more than 200 nm and a very narrow particle distribution. An analysis of the interactions between the control variables and the process optimisation was conducted using the Response Surface Methodology (RSM). Based on the results of the experiment, it was found that the particle size of nanodispersions was influenced by the Hydrophilic-Lipophilic Balance (HLB) number and the evaporation temperature. Moreover, the physical stability of micellar systems is generally determined by the organic phase within them. Regarding formulation stability, the zeta average of the nanodispersions remained virtually unchanged in solutions with different pH levels and short-term storage (14 days) at room temperature. Overall, it has been demonstrated that Ganoderic acid nanodispersions can be efficiently generated by combining ultrasound cavitation and solvent evaporation.

Fighting against the COVID-19 pandemic caused by the SARS-CoV-2 virus is one of the most critical challenges facing the global health system today. The possibility to identify the group of persons in the cohort of people under 50 years old, who are sensitive to the COVID-disease by non-invasive methods, is a very perspective approach for estimating the epidemiological state of the human population. The study aimed to identify the features of people's faces with COVID-19 that the most correlate with disease severity could serve as one of these approaches. For this aim, 525 photos of patients' faces with different outcomes of COVID-19 disease were analyzed using the Dlib face recognition convolutional neural network pre-trained for face recognition. Face descriptor vectors were obtained using the convolutional neural network. Facial features were found that predict a person's sensitivity to the SARS-CoV-2 virus (disease severity), and the contribution of each of the features to the risk of developing a severe form of COVID in a person was found. The accuracy of the binary classification of the individual severity of the COVID-19 course using the k-nearest neighbors algorithm on the test dataset was accuracy - 84%, AUC - 0.90.

As described in previous work, the use of synthetic chemical ingredients in modern cosmetics is postulated to be a cause of damage to the skin microbiome. The discovery that biodiversity on the human skin is currently the only reliable indicator of skin health, meant that for the first time, a mechanism to test for healthy skin was possible. Using this mechanism and in collaboration with The Medical University of Graz, who carried out the independent study, this work aimed to help answer whether modern day synthetic cosmetics are a main cause of long term damage to the skin microbiome. Thirty-two human participants tested three different face washes for their effect on the skin’s microbial diversity, along with skin pH, moisture and TEWL (trans-epidermal water loss), washing twice a day for four weeks. The upper volar forearm of the volunteers was swabbed at the beginning, two weeks in and end (four weeks). 16S rRNA sequencing was used. One leading ‘natural’ brand full of synthetic ingredients, a leading synthetic brand and a 100% natural face wash were used. Results give the first indications of a link between synthetic ingredients in a cosmetics product, and its effect on skin microbiome biodiversity. It paves the way for future studies on the topic with a larger sample group, longer test period and standardised methodology to create a universal standard for testing the health of skin using benchmark diversity values. This can be used in the future to test the effectiveness of cosmetics or ingredients on skin health, leading to the banning of products proven to harm the skin’s natural environment.

A catastrophic loss of microbial biodiversity on the skin has led to alarming increase in the prevalence of allergies and long-term damage to the skin, which could also have damaging knock on effects to overall health. This study uses 50 human participants, to obtain an average (benchmark) value for the biodiversity of ‘healthy’ western skin, which is crucial in updating our 2017 skin health measuring mechanism to use standardised methodology. Previous work with a larger sample size was unsatisfactory for use as a benchmark due to its use of different and outdated diversity indices. We also investigated the effect of age and sex, two known skin microbiome affecting factors. Although no statistical significance is seen for age- and sex- related changes in diversity, there appear to be changes related to age which elaborates on previous work which used larger, more general age ranges. Our study indicates adults age 28-37 have highest diversity, and age 48-57 the lowest. Crucially, because of this study we are now able to update the skin health measuring mechanism from our 2017 work. This will aid diagnostic assessment of susceptibility to cutaneous conditions or diseases, and treatment. Testing any human subject will be rapidly improved by obtaining future benchmark diversity values for any age, sex, body site and area of residence, to which they can be compared. This improvement means we can also more accurately investigate the ultimate question: What factors in the western world are a main cause of the skin allergy epidemic? This could lead to future restriction of certain synthetic chemicals or products found to be particularly harmful to the skin.

In this paper we aim to help topical probiotics research and development achieve its potential as an incredible future solution for skin problems by investigating whether the current products on the market satisfy criteria for safe and effective use on the skin microbiome. As previously defined, this includes whether they use microbes known to be part of a healthy skin microbiome and in healthy amounts. In addition, we evaluate whether they contain live microbes, and therefore can be classified as probiotics according to the WHO’s definition. Using recent market analysis at least 84% of products do not contain live microbes. Of the products that appeared to use live microbes, they contained those used in research and development of probiotics for the gut. Due to the varying composition of each person’s microbiome, there is not a one size fits all probiotic solution. Personalisation of probiotics products is essential to satisfy the criteria for safe and effective use, but none of the products on the market, understandably, offer this. Upsetting the delicate ecosystem balance of the skin microbiome could have damaging effects and regulation could help to stop a loss of trust between consumers and cosmetics industry. Future work will perform an in-depth evaluation of the topical probiotics on the market in the EU, USA, and Canada. We will also investigate how to move the topic closer to achieving its potential by updating the criteria, including by discussing how to measure the success of a probiotic solution.

This short communication reports on the initial results of a much larger, ongoing project, the aim of which is to investigate the question: could the skin microbiome, just like the gut microbiome, play a role in sports recovery and performance – and if so, could this role be as significant a one as that played by the gut microbiome? 17 high performance college athletes addressed their skin microbiome by minimizing contact with synthetic chemicals and by using topical skin supplements, shown previously to significantly increase skin microbiome biodiversity, for two weeks after training. 76% said their skin softness improved, 35% said their muscle stiffness and recovery after sport improved, 12% said their sleep quality improved, and 100% said they would be likely to use skin supplements again. Future work will use hundreds of athletes.

There is a skin allergy epidemic in the western world, and the rate of deterioration has increased significantly in the past 5-10 years. It is probable that there are many environmental contributing factors, yet some studies have linked it primarily to the rise in the use of synthetic chemical ingredients in modern cosmetics. Our challenge, therefore, was to find a mechanism to determine the effect these substances have on skin health, and whether they really are a primary cause of long term damage to the skin. The first problem is the lack of any definitive way to measure skin health. Motivated by the overwhelming evidence for a link between deficient gut flora and ill health, we decided to look at whether our skin microbiota could similarly be used as an indicator of skin health. Our research illustrates how it is microbiota diversity alone that can predict whether skin is healthy or not, after we revealed a complete lack of conclusive findings linking the presence or abundance of particular species of microbe to skin problems. This phenomenon is replicated throughout nature, where high biodiversity always leads to healthy ecosystems. ‘Caveman’ skin, untouched by modern civilisation, was far different to ‘western’ skin and displayed unprecedented levels of bacterial diversity. The less exposed communities were to western practices, the higher the skin diversity, which is clear evidence of an environmental factor in the developed world damaging skin. For the first time we propose benchmark values of diversity against which we can measure skin to determine how healthy it is. This gives us the ability to be able to predict which people are more likely to be prone to skin ailments, and start to test whether cosmetic ingredients and products are a main cause of the skin allergy epidemic.

In a global context, the story of the Jesuit compound in Shanghai, since its establishment by French Jesuits in 1847, reflected not only conflicts between rival powers in Europe but also the fight for their interests in the Eastern world. The Pope, who was stuck without legal status in the Vatican after 1861, was also seeking the chance to save the authority of the Church in the face of questions regarding the extent of his temporal power and the status of Rome in the context of Italian unification. As in the Reformation, a break-through in the east seemed to offer a solution for losses in Europe. However, the Jesuits to the East in the late 19th century were not only troops working and fighting on behalf of the Pope; their identities under the French Protectorate added complexity to an already complicated story involving not just the Church, but the course of world history.The female Catholic orders at the east bank of Zi-ka-wei compound became a unique window to approach the complexity.

As a method of lightweight design, multi-material design aims to make targeted use of materials in order to reduce CO2 emissions. In this context, it can be described as one of the product development methods used to meet the challenges of climate change. However, since the design of structures in multi-material design is complex, topology optimization can be used to support the product developer. In this article, a multi-material topology optimization method is developed that combines the Velocity Field Level Set method with the Reconciled Level Set method. Furthermore, the current design is explicitly resolved in each iteration by means of multi-material remeshing. The edge collapse phase in the remeshing process is achieved by applying the producer consumer pattern. The developed method is then validated using known examples from the state of research and the influence of parameters of the method on the result is analyzed by means of studies.

We set up this preliminary study to evaluate one main question: could strengthening the microbiome have potential benefits for patients suffering with adverse effects after stopping long term topical steroid use? We aim to turn it into a much larger study if the results show promise. After commonly being prescribed for eczema, cessation of topical steroid use, especially after long periods of inappropriate use, can leave lasting adverse effects on the body and skin, known by some as topical steroid withdrawal (TSW). Furthermore, the subsequent withdrawal the body experiences when coming off the drug can leave lasting adverse effects on the body and skin, known by some as topical steroid withdrawal (TSW). This preliminary study involved seven human participants suffering with skin problems associated with TSW who approached Dr. Anja Gijsberts-Veens of their own volition because they were interested in more natural recovery methods. Five completed the study in full. Progress in skin condition was tracked by self-assessed symptom severity questionnaires filled out at the beginning and end of the study. The skin microbiome was addressed by using a 100% natural product shown in previous work to significantly increase skin microbiome biodiversity. Three participants implemented dietary changes and supplementation in response to guidance after fecal sample analysis to improve their gut health and biodiversity. The average improvement in skin symptoms for all participants was 40% and average symptom improvement ranged from 14% for Patient 5 to 92% for Patient 1. On average, the participants saw an improvement in 85% of their symptoms and a stagnation or regression in 11% and 4% respectively. We believe these results show enough promise to warrant expansion of this research to use a larger sample size, preferably 50+ participants, in future work. We also aim to swab the skin of participants to assess the effect on the skin microbiome from skin and gut treatments, as well as including more in-depth analysis of skin and gut microbiomes.

Artificial intelligence (AI) is revolutionizing the textile industry by improving the prediction of fabric properties and handfeel, which are essential for assessing textile quality and performance. However, the practical application and translation of AI-predicted results into real-world textile production remain unclear, posing challenges for widespread adoption. This paper systematically reviews AI-driven techniques for predicting these characteristics by focusing on model mechanisms, dataset diversity, and prediction accuracy. Among 811 papers initially identified, 26 were selected for in-depth analysis through both bibliometric and content analysis. The review categorizes and evaluates various AI approaches, including machine learning, deep learning, and hybrid models, across different types of fabric. Despite significant advances, challenges remain, such as ensuring model generalization and managing complex fabric behavior. Future research should focus on developing more robust models, integrating sustainability, and refining feature extraction techniques. This review highlights the critical gaps in the literature and provides practical insights to enhance AI-driven prediction of fabric properties, thus guiding future textile innovations.

Commercial buildings situated in hot and humid tropical climates rely significantly on cooling systems to maintain optimal occupant comfort. A well-accurate day-ahead load profile prediction plays a pivotal role in planning the energy requirements of cooling systems. Despite the pressing need for effective day-ahead cooling load predictions, current methodologies have not fully harnessed the potential of advanced deep-learning techniques. This research paper aims to address this gap by investigating the application of innovative deep learning models in day-ahead hourly cooling load prediction for commercial buildings situated in tropical climates. A range of deep learning techniques, including Deep Neural Network, Convolutional Neural Networks, Recurrent Neural Networks, and Long Short-Term Memory networks are employed to enhance prediction accuracy. Furthermore, these individual deep learning techniques are synergistically integrated to create hybrid models, such as CNN-LSTM and Sequence-to-Sequence models. An extensive comparative analysis is conducted to identify the most effective hybrid model. Sequence-to-sequence model provided better performance compared to the other single and hybrid models. Experiments are conducted to choose the time horizons from the past that can serve as input to the models. Further, the influence of various categories of input parameters on prediction performance has been assessed. Historical cooling load, calendar features and outdoor weather parameters are found in decreasing order of influence on prediction accuracy. This research focuses on buildings located in Singapore and presents a comprehensive case study to validate the proposed models and methodologies.

Abstract: Mass spectrometry research laboratories reported multiple probes for ambient ionization in the last years. Combining them with a mechanical moving stage enables automated sampling and imaging applications. We developed a robotic platform, which is based on RepRap 3D-printer components, and therefore easy to reproduce and to adopt for custom prototypes. The minimal step width of the Open LabBot is 12.5 μm, and the sampling dimensions (x, y, z) are 18 × 15 × 20 cm. Adjustable rails in an aluminium frame construction facilitate the mounting of additional parts such as sensors, probes, or optical components. The Open LabBot uses industry-standard G-code for its control. The simple syntax facilitates the programming of the movement. We developed two programs: 1) LABI-Imaging, for direct control via a USB connection and the synchronization with MS data acquisition. 2) RmsiGUI, which integrates all steps of mass spectrometry imaging: The creation of G-code for robot control, the assembly of imzML files from raw data and the analysis of imzML files. We proved the functionality of the system by the automated sampling and classification of essential oils with a PlasmaChip probe. Further, we performed an ambient ionization mass spectrometry imaging (AIMSI) experiment of a lime slice with laser desorption low-temperature plasma (LD-LTP) ionization, demonstrating the integration of the complete workflow in RmsiGUI. The design of the Open LabBot and the software are released under open licenses to promote their use and adoption in the instrument developers’ community.

Public-Private Partnerships (P3 or PPPs) have been utilized and studied more frequently over the past couple of decades for both infrastructure projects and building development projects. Based upon the records of the outcomes of these projects there is a plethora of data that demonstrates the benefits and challenges that this delivery method poses. As the name suggests, these partnerships allow for public goals to become realized while also providing opportunities for the private sector to gain business success. These two often divergent interests are finding mutual benefit but the process of compromises also comes with some disadvantages that should be understood in order to make decision of whether the risk/reward equation works for all stakeholders. In particular, this paper will focus on how PPPs affect the construction aspects of projects and will assert how to understand the risks and evaluate the benefits from a construction perspective.

Langya Henipavirus (LayV) is a new zoonotic Henipavirus reported in 2022. Patients infected by LayV show common cold symptoms, such as fever, fatigue, and cough. Non-fatal cases associated with this virus have been reported in Henan and Shandong provinces in China. Should human-to-human transmission occur, it has the potential to be a pandemic like SARS-CoV-2. LayV is an enveloped negative-sense RNA virus. Its polymerase (encoded by the L gene) is considered a conserved target shared within Henipavirus viruses, allowing for qPCR detection, in which primers play a pivotal role. For the development of a diagnostic kit, we designed three primer sets targeting the L gene and evaluated their detection of plasmids carrying part of the L gene. Primer sets 1 and 2 were found to be suitable for further sensitivity, specificity, and efficiency testing. Both primer sets were able to amplify PCR products in the presence of human saliva, and both the melt curve analysis and gel electrophoresis showed distinct peaks and bands, supporting the specificity of the qPCR primers. Based on standard curve analysis, both primers detected as low as approximately 1000 copies of the L gene. Given the specificity and robustness to work in the presence of saliva, the primers can be used for pandemic-preparedness in LayV detection.

Data on the KIT mutation rate in skin melanoma in the central European region is missing. Accordingly, in a cohort of 79 double wild type (BRAF/NRAS) skin melanoma KIT mutation was assessed by Sanger sequencing of exons 9,11,13,17 and 18. In this skin melanoma cohort KIT mutation frequency was found to be 34/79 (43%) with a significantly higher rate in acrolentiginous melanoma (ALM) as compared to UV-induced common variants (20/34, 58.8% versus 14/45, 31.1%, p=0.014). Exon 11 was the most frequent mutation site (44.7%) followed by exon 9 (21.1%) equally characterizing UV-induced common histotypes and ALM tumors. KIT mutation hotspots were identified in exon 9 (c491/492), in exon 11 (c559,c572, c570), in exon 13 (c642), in exon 17 (c822) and in exon 18 (c853). The relatively high KIT mutation rate in skin melanoma in this central-European cohort justifies regular testing of this molecular target.

With the breakthrough of modernism, various efforts are undertaken to rationalize architecture and building processes using industrial principles. Few architects explore these as intensively as Walter Gropius, the founder of the Bauhaus. Even before World War One, and increasingly in the interwar years, Gropius and a number of colleagues undertake various experiments which manifest in a series of projects, essays, model houses and Siedlungen. These aim at conceptually different goals, i.e. they follow two different categories of industrial logic: first, a flexible construction kit and, second, an assembly line serial production. This article traces the genesis of these two concepts and analyses their characteristics using these early manifestations. Compared to existing literature, this article takes into account hitherto neglected primary sources as well as technological and construction history aspects—allowing for a distinction based not only on theoretical, but also technological and structural characteristics. This article shows that Gropius succeeds in formulating and exploring the two principles in theory and practice as well as drawing conclusions by the end of the 1920s. With them, he contributed significantly to the rationalization of architecture, and his principles have been picked up and developed further by numerous architects since then.

Depression is one of the most prevalent mental disorders worldwide. This study examined the effect of a spiritual connectivity intervention on individuals with depression in a randomized waitlist control trial. Fifty-seven participants with mild or moderate depressive symptoms were randomly assigned to either the intervention group (n=28) or the waitlist control group (n=29). The intervention comprised eight weekly sessions focusing on divine connection, forgiveness and freedom, suffering and transcendence, hope, gratitude, and relapse prevention. The outcome measures included depressive symptoms, anxiety, hope, meaning in life, self-esteem, and social support. Participants completed self-administered questionnaires at baseline (week 0), post-intervention (week 8), and at a 3-month follow-up (week 20). Repeated-measures ANOVA and one-way ANCOVA were used to compare the within-group and between-group differences in the changes in outcome variables. Participants in the intervention group showed significant improvements in depression, anxiety, spiritual experience, hope, self-esteem, and perceived social support after the intervention. Effect size statistics showed small to large differences (Cohen’s d, 0.308 to -1.452). Moreover, 85.71% of participants in the intervention group also experienced clinically significant reductions in PHQ-9 scores from baseline to immediate post-intervention. This study highlights the effectiveness of a low-cost, accessible intervention suitable for community implementation by clergy and faith-based organizations.

Informal caregivers are essential in supporting stroke survivors' recovery, but it is unclear whether community interventions can promote healthy eating behaviors and social participation among stroke survivors and their caregivers. The Train-Your-Brain (TYB) program's impact on adherence to national dietary guidelines and social participation among informal caregivers and stroke survivors were assessed in a quasi-experimental study. The TYB program had nine sessions, with one focusing on healthy lifestyle. Participants were prompted to discuss the topics covered, leading to social participation. Dietary habits were assessed using fruits and vegetables consumption questions, while social participation was measured using the Social Impact Measurement Framework. Mann-Whitney U-test and Wilcoxon Signed Rank Test were utilized to analyze the data. Eighteen informal caregivers and 27 stroke survivors participated in the program. Results showed a significant increase in fruit and vegetable intake and social participation in informal caregivers after the program, but there were no significant changes in stroke survivors. Informal caregivers play a crucial role in stroke survivors' lifestyle habits and in encouraging social connections with other stroke survivors. Thus, healthcare professionals should prioritize caregiver support and education to facilitate long-term dietary and social changes that can positively impact stroke survivor's recovery and quality of life.

The aims of the study are: a) Describe the reactogenicity of WHO-approved two mRNA (Pfizer-BioNTech, Moderna) and two non-RNA vaccines (Oxford-AstraZeneca, Sinovac) among lactating mother and baby pairs; and b) compare and contrast the reactogenicity between mRNA and non-mRNA vaccines. A cross-sectional, self-reported survey was conducted amongst 1784 lactating women who received COVID-19 vaccinations. The most common maternal adverse reaction was a local reaction at the injection site; the largest minority of respondents, 43.7% (780/1784), reported experiencing worse symptoms when receiving the second dose compared to the first dose. There were no major reported adverse effects or behavioural changes in the breastfed infants. Among the respondents who received non-mRNA COVID-19 vaccinations, a majority reported no change in lactation but those who did more commonly reported an increase in milk supply, decrease in milk supply and pain in the breast. The more commonly reported lactation changes (fluctuations in breastmilk supply and pain in the breast) for the non-mRNA vaccines were similar to that of respondents who received mRNA vaccines. Our study, with a large cohort and wide geographical and racial mix, further augments earlier reported findings that COVID-19 vaccines are safe for breastfeeding mothers and her children.

The paper discusses the design and modeling of a simple and illustrative hardware kit for teaching the basics of quantum cryptography to engineering students. The novel solution differs from those already on the market in that it is focused on familiarising trainees with the physical principles of quantum key distribution, as well as with the basics of mathematical formalism in quantum mechanics. This is achieved by using a minimally sufficient set of optical elements with a simple mathematical description in the Jones formalism. This composition of the kit is targeted mostly at engineering students and does not require advanced training in physics as a prerequisite. The configurable architecture of the hardware educational kit contributes to the deeper involvement of students. By independently changing the modular configuration of the system, students can conduct experiments that were not directly provided by the developers. For instance, students can assess the impact of choosing the basic settings of phase retarders on the course of a man-in-the-middle attack. The proposed amount of mathematical and informational support, as well as ready-made formal models, is sufficient to reasonably put forward hypotheses for experimental verification and interpret the obtained empirical data. At this moment, the hardware kit is being replicated, distributed and successfully applied at universities and companies in the communications industry. The accumulated experience of educational use testifies to the high efficiency of the kit as a tool for basic QKD training for people without prior knowledge of quantum mechanics. A discrete event model simulating the operation of the hardware kit is implemented in the non-commercial modeling software CPN Tools and is openly distributed.

Pericyte and their tunnelling nanotubes (P-TNTs) have been described as involved in the early phases of angiogenesis in the human normal developing brain and glioblastoma, being a common feature of combined endothelium/pericyte vessel sprouts. Based on the few data available so far about this ‘alternative’ pericyte-TNT-driven mode of angiogenesis, whose precise function in vessel growth through vascular cells communication, has still to be determined, this study aims to cast light on the regulative molecules involved in this process, governed by intimate pericyte-endothelial interactions. After considering the existence of the sprout guiding pericyte and P-TNT, as shown by pioneering ultrastructural studies as well as by more recent observations with NG2/CD146 pericyte markers and basal lamina molecules, a step-by-step profile of the process has been suggested and an investigation undertaken on ‘unconventional’, pro-angiogenic ligand/receptor systems, that may have a role aside from the canonical pathways. In this context, a possible candidate worthy of investigation is the c-KIT receptor, a member of the tyrosine kinase family of proteins, which also includes the well-known VEGFR and PDGFR. According to the obtained results showing a primary localization of c-KIT on endothelial cells and pointing out a differential distribution of the receptor on normal vs glioblastoma vessels, it seems conceivable to propose the stem cell factor/c-KIT signaling as a key factor in pericyte-TNT-driven angiogenesis, advancing this alternative mode of angiogenesis and the c- KIT pathway as possible targets for devising effective antiangiogenic therapeutic strategies.

In this proposed work, five systems were developed to classify four motor functions—forward hand movement (FW), grasp (GP), release (RL), and reverse hand movement (RV)—from EEG signals. The dataset used is WAY-EEG-GAL, involving participants performing a sequence of hand movements. During preprocessing, bandpass filtering was applied to remove artifacts and focus on the mu and beta frequency bands. The first system, a preliminary study model, explored the overall framework of EEG signal processing and classification. It utilized time-domain features like variance and frequency-domain features like alpha and beta power, with classification performed using a KNN model. Insights from this system informed the development of a baseline system, which uses the same dataset but different feature extraction and classification paradigms. This baseline system combined the common spatial patterns (CSP) method with continuous wavelet transform (CWT) for feature extraction and employed a GoogLeNet classifier with transfer learning. Classification was performed on six unique pairs of events derived from the four motor functions, using both intrasubject and intersubject methods. The baseline system achieved the highest accuracy of 99.73% for the GP-RV pair and the lowest accuracy of 80.87% for the FW-GP pair in intersubject classification. Building on this, three additional systems were developed to perform 4-way classification. Among these, the final model, ML-CSP-OVR, achieved the highest intersubject classification accuracy of 78.08% using all combined data and 76.39% for leave-one-out intersubject classification. This proposed model, which features a novel combination of CSP-OVR, CWT, and GoogLeNet, demonstrates strong potential as a general system for motor imagery (MI) tasks without being subject-dependent.

The healthcare system is crucial to the development, standard of living, and sustainability of any country. Amid the pandemic, most developed countries are experiencing varying levels of difficulty managing their healthcare systems. Overloading of healthcare services is common, leading to prolonged waiting times for medical services; thus, the wastage of hospital resources must be addressed seriously. In this paper, we examine the problem of no-shows in outpatient clinics. Through a review of the literature and practical industrial experience, we identify the processes of these clinics. We then propose a robust optimisation approach for overbooking using a traditional overbooking model and a robust system. This model aims to mitigate the significant parameter uncertainties encountered during the pandemic. Considering risk aversion, the optimal policy for overbooking can be established while accounting for the costs associated with overbooking. The main contribution of this paper is the introduction of an alternative method to address the uncertainty of no-shows using an overbooking technique.

This study aims to construct simple devices to ascertain the concentrations of ammonium (NH4+) and nitrate (NO3-). The device structure comprises a visible and near-infrared absorption meas-urement room, along with an RGB (red, green, and blue) absorption measurement room, con-stituting the two measuring rooms. Both the measurement rooms are equipped with light sources and detectors configured to operate in opposed or thru-beam modes. A tiny processor is utilized for processing the measurements, with an algorithm implemented within its memory. During the algorithm development phase, ranges for measuring the quantity of nutrients were categorized using a discriminant analysis approach. Thirty percent of the soil sample data were utilized as verification data, while the remaining 70 percent served as training data. Nutrient content values from reliable measuring instruments were incorporated into all datasets. Discriminant analysis was employed to classify the amount of NH4+ into five ranges based on the test results. When tested with soil samples, the accuracy was 66.13% compared to the reference value of a reliable measuring device. Similarly, NO3- was classified into four ranges with an accuracy of 81% com-pared to the reference value of a reliable measuring device.

The paper presents the open source tool climdex-kit which includes utilities to compute, analyze and visualize climate indices based on the input data, target domain and temporal extent defined by the user. It is intended to support researchers as well as practitioners and decision makers to derive, handle and interpret meaningful information for climate change studies and sectoral applications. It currently includes the computation of 30 indices based on temperature and precipitation, describing both mean and extreme climate conditions, and it is designed to work with climate model projections. The tool is written in Python and integrates utilities from the well-established Climate Data Operators (CDO) and NetCDF Operators (NCO) libraries. The specific utilities for selecting, aggregating and visualizing data are thought to help users to produce tailored results improving understanding and communication of future climate change. In order to show the functionalities of the package as well as its potential integration in regional climate services, climdex-kit was applied to an ensemble of downscaled climate model projections up to 2100 for the region Trentino – South Tyrol (north-eastern Italian Alps). The projections for a selection of indices accounting for extreme temperature and precipitation conditions were derived and different visualization choices discussed. The package climdex-kit is developed in a way that allows users to implement additional routines for calculating other indices as well as for easily adapting the routines to handle with different data types and spatio-temporal targets defined by the specific application. Effective climate services can in fact be developed only if flexible tools and customizable climate information are integrated with a clear understanding of data features and limitations.

Strawberry root rot caused by Neopestalotiopsis clavispora is one of the main diseases of strawberry and significantly impacts the yield and quality of strawberry fruit. There are now no effective control techniques available except for fungicide sprays, which may directly impact consumers. Biological control is becoming an alternative method for the control of plant diseases to replace or decrease the application of traditional synthetic chemical fungicides. Trichoderma is widely used as a biological agent for controlling strawberry root rot. In order to provide resources for screening the highly effective biocontrol fungus for controlling strawberry root rot caused by Neopestalotiopsis clavispora, the biocontrol mechanism,the control effects of Trichoderma asperellum CMT10 against strawberry root rot and growth-promoting effects on strawberry seedlings were investigated by plate culture, microscopy observation and root drenching methods.The results showed that CMT10 had obvious competitive, antibiotic and hyperparasitism effects on Neopestalotiopsis clavispora CMGF3. The CMT10 could quickly occupy nutritional space, and the inhibition rates of CMT10 against CMGF3 in confrontation culture on 7 d was 65.49%. The inhibition rates of volatile metabolite and fermentation metabolite produced by CMT10 against CMGF3 were 79.67% and 69.84%, respectively. The mycelium of strain CMT10 can act as hyperparasites by making contacting, winding and penetrating hyphae of CMGF3. Pot experiment showed that the biocontrol efficacy of CMT10 on strawberry root rot caused by Neopestalotiopsis clavispora was 63.00%. CMT10 had obvious promotion effect on strawberry growth, the plant height, root length, total fresh weight, root fresh weight, stem fresh weight and root dry weight, with the promotion rates were 20.09%, 22.39%, 87.11%, 101.58%, 79.82% and 72.33%, respectively. Overall, this study showed the ability of Trichoderma asperellum CMT10 to control strawberry root rot and their potential to develop as novel biocontrol agents to replace chemical fungicides for eco-friendly, sustainable agriculture.

Xinjiang, as a climate-sensitive region in northwest China, holds significant importance in studying extreme weather events for agricultural production and socioeconomic development. Based on data from 52 meteorological stations and 23 extreme climate indicators in Xinjiang from 1960 to 2021, the 5a moving average, linear trend estimation, climate tendency rate, and GIS spatial analysis methods are used to analyze the distribution and change characteristics of extreme climate. The results revealed that from 1960 to 2021, TXx, TNx, TXn, TNn, FD, ID, TN10p, TX10p, and WSDI showed a significant upward trend, while SU, TR, TN90p, TX90p, and CSDI showed a significant downward trend. What is more, the range of changes in the extreme temperature indexes from 1990 to 2021 is higher than that of 1960 to 1989. The high-value areas of extreme indexes are primarily concentrated in the northern part, while the high-value areas of cold event indexes are mainly distributed in the southern part. The upward/downward trends all accounting for over 80.00% of the entire region. The Rx1day, Rx5day, PRCPTOT, R95p, R99p, R10, R20, and R25 showed a significant growth trend from 1960 to 2021, and the range of change in the extreme precipitation indexes from 1990 to 2021 was lower than that from 1960 to 1989. Moreover, their high-value areas and high climate tendency areas are mainly concentrated in the northern and western parts of Xinjiang, with upward trends all accounting for over 71.00% of the entire region. The research results provide theoretical foundations for formulating climate risk strategies in the northwest region of China.

With the availability of wearable health monitoring sensor modules like 3-Lead Electrocardiogram (ECG), Pulse Oximeter (SpO2), Galvanic Skin Response (GSR), Hall effect sensor (for measuring Respiratory Rate), Blood Pressure and Temperature measuring and sensing elements, it has now become possible to device a composite health status monitoring kit that can measure vital signs and other physiological parameters pertaining to human health in real time. Traditionally, the physiological parameters along with vital signs related examination was possible only in a hospitalized or ambulatory environment, however due to advances in sensing and embedded system technology and miniaturization of data acquisition and processing elements health monitoring has become possible even when individuals remain engaged in their day to day activities at the convenience of space and location. The patients or individuals subject to monitoring may suffer from a traumatic experience due to their medical condition and may need emergent incidence response and the critical care team may have to prepare for the treatment only after the patient arrives, which often is too late, as in case of cardiac arrests or severe injuries. The research focused on real-time health status monitoring and trauma scoring using standard physiological parameters along with standard telemetry protocols to make the critical care team aware of an emergent situation and prepare for a medical emergency. Vital signs and physiological parameters (heart rate, temperature, respiratory rate, and blood pressure, SpO2) were measured in real time from human subjects non-invasively. In order to enable monitoring of the patients engaged in day to day activities, errors due to the motion were removed using stationary wavelet transform correction (correlation coefficient of 0.9 after correction) and signals from various sensors were denoised, filtered and were encoded in a format suitable for further data analysis. A composite sensor kit capable of monitoring vital signs and physiological parameters can be very useful in incident response when an individual undergoes a traumatic experience related to stroke, cardiac arrest, fits or even injury, as along with monitoring information the kit can calculate scores related to trauma like the Injury Severity Score (ISS), National Early Warning Signs (NEWS), Revised Trauma Score (RTS). Trauma Injury Severity Score (TRISS), Probability of Survival (Ps) score. An open access database of vital signs and physiological parameters from Physionet, MIMIC 2 Numerics (mimicdb/numerics) database was used to calculate NEWS and RTS and to generate correlation and regression models using the vital signs/physiological parameters for a clinical class of patients with respiratory failure and admitted to Intensive Care Unit (ICU). NEWS and RTS scores showed no significant correlation (r = 0.25, p<0.001) amongst themselves, however together NEWS and RTS showed significant correlation with Ps (blunt) (r = 0.70, p<0.001). RTS and Ps (blunt) scores showed some correlation (r = 0.63, p<0.001) and NEWS score showed significant correlation (r = 0.79, p<0.001) with Ps (blunt) scores. Furthermore, since individuals have to be monitored regardless of location, these kits have to have a built-in capability to locate the individual so that the incident response team can locate the individual based on Global Positioning System coordinates (GPS). A Quantum GIS (Geographical Information System) application using real-time GPS coordinates (OpenStreetMap coordinates) was used to calculate the shortest path using QGIS Network Analysis tool to demonstrate the calculation of shortest path and direction to locate the nearest service provider in shortest time. Along with locating the nearest healthcare service provider, it would help if the critical care team could be made aware of the physiological parameters and trauma scores using standard protocols accepted across the globe. The physiological parameters from the sensors along with the calculated trauma scores were encoded according to a standard Systematized Nomenclature of Medicine-Clinical Terms (SNOMED-CT) coding system and International Code of Diseases (ICD) codes and the trauma information was logged to Electronic Health Records (EHR) using Fast Health Interoperability Resources (FHIR) servers. FHIR servers provided interoperable web services to log the event information in real time. It could be concluded that analytical models trained on existing datasets can help in analyzing a traumatic experience or an injury and the information can be logged using a standard telemetry protocol as a telemedicine initiative. These scores enable the healthcare service providers to estimate the extent of trauma and prepare for medical emergency procedures and find applications in general and military healthcare.

A series of Ni/KIT6 catalystprecusors with 25wt.%Ni loading amount were reduced in H₂ at 400, 450, 500, and 550ºC, respectively. The studied catalysts were investigated by XRD, Quasiin-situ XPS, BET, TEM, and H₂-TPDanalysis methods.It was found that reduction temperature is an important factor affecting the hydrodeoxygenation (HDO) performance of the studied catalysts. The reduction temperature influences mainly the content of active components, crystal size, and the abilityfor adsorbing and activatingH2. The developed pore structure and large specific surface area of the KIT-6 support favored the Ni dispersion.The RT450 catalyst, which was prepared in H₂ atmosphere at 450 ºC, has the best HDO performance. Ethyl acetate can be completely transformed, and maintain 96.8% ethane selectivity and 3.2% methane selectivity at 300 ºC. The calculated apparent activation energies of the prepared catalysts increased in the following order: RT550 > RT400 > RT500 > RT450.

In order to enhance the efficiency and combined performances of nitriding layer, aluminum-modified plasma nitriding (Al-PN) was developed in this research by adding some FeAl particles around the samples during plasma nitriding (PN) for 42CrMo steel. The results show that the efficiency is dramatically enhanced almost 6 times comparing with traditional PN, with the effective hardening layer increasing from 224 μm to 1246 μm at 520℃/4h. More importantly, the compound layer increased just a little bit from 11.64 μm to 14.32 μm, which remarkably reduces the ratio of the compound layer thickness to effective hardening layer thickness, thus being quite beneficial to decrease the brittleness level, making the brittleness level decreasing from Level 4 to Level 1. Meanwhile, ultra-high surface hardness and excellent wear behaviors are obtained by aluminum-modified plasma nitriding (Al-PN) due to the formation of dispersed strengthening phased of AlN and FexAl in the nitriding layer, with the surface hardness increasing from 755 HV0.025 to 1251 HV0.025, wear rate decreasing from 8.15 x10-5g N-1 m-1 to 4.07 x10-5g N-1 m-1. In other words, comparing with PN, the wear resistance has been almost doubled by Al-PN. Therefore, the research can provide comprehensive insights into the surface characteristics and combined performances of the aluminum-modified plasma nitriding layer.

Background: This study aimed to assess the dementia literacy (DL) level of community-dwelling adults in the four cities (Hong Kong, Guangzhou, Macau and Zhuhai) of the Greater Bay Area of China and to determine the preferred mass media for receiving dementia information. Methods: A multi-city cross-sectional study with 788 community-dwelling adults completed the survey. Dementia literacy was indirectly measured by two validated scales, 30-item Alzhiemer’s Disease Knowledge Scale (ADKS) and 20-item Dementia Attitudes Scale (DAS). When the ADKS total score was <15 and DAS total score was <70, it was considered as ‘inadequate dementia literacy’. Participants were also asked to indicate whether they would like to receive dementia information via digital media or traditional media. Chi-square tests and logistic regressions were undertaken. Results: About one-third of the participants had inadequate dementia literacy. Those with young age or secondary education preferred to get dementia information from social media. But people living in public housing would like to get information from government or hospital websites. Middle-aged participants inclined to learn dementia from television or radio. Conclusion: It is worthy to conduct territory-wide public education in dementia and develop strategies according to their preferences in the types of mass media.

It is widely acknowledged that adolescent females are particularly at risk of low body-esteem. Low body-esteem is associated with poor mental health and other negative outcomes. Interventions to help raise body-image could have considerable impact, especially if the intervention is low-cost, easy to implement and scalable. We investigated the efficacy of an intervention where participnants could chose their own clothes to wear during a Physical Education (PE lesson) on changes in body-esteem. We hypothesized that body-esteem would improve with choice. To show that body-esteem is not a transient construct, we tested its stability when assessed in a test-retest design when completed in a classroom setting, hypothesizing body-esteem would be stable. Participants (N =110; Mage =14.9; SDage = 0.68) females completed a 14-item body-esteem scale 4 times; a) wearing school uniform in an assembly, b) during a PE lesson separated by a 2-week gap. The intervention was implemented where students got a choice of PE kit and could wear their own clothes. Findings indicate that body-esteem was stable in the classroom setting where clothes and context were stable, but improved significantly when participants were given a free choice of kit to wear during PE. We argue that this low-cost and scalable intervention represents a useful start point for helping support low body-esteem among a potentially vulnerable population.

Sensory descriptive analysis was used to evaluate the aged Feng-flavored baijiu. The results indicated that there are notable differences in the samples of different ages. The samples with shorter storage times and fresh distilled Baijiu present bran flavor, and fresh green flavor. with the increase of storage time, the fragrance of honey, sweetness, flowers, and aging gradually increases. The samples of Feng-flavored baijiu were dected by Headspace solid-phase microextraction (HS-SPME) combined with comprehensive two-dimensional gas chromatography time-of-flight mass spectrometry (GC×GC–TOFMS) , in total, 496 sustances were identified in all samples, mainly containing 14 types of substances, such as esters, aldehydes etc., of which 42 substances were found in Feng-flavored baijiu for the first time. Chemometrics was used to analyze the key differential compounds. 143 differential compounds closely related to aging were preliminarily screened, and principal component analysis revealed that these samples were separated by year. 65 differential compounds were selected out by partial least squares discriminant analysis(PLS-DA). Furthermore, 43 key differential compounds were selected from the aged Feng-flavored baijiu combined with variable importance in projection and Pearson correlation coefficients. Partial least squares regression (PLSR) was used to research the correlation of sensory properties and key differential compounds, and the results indicated that most compounds were closely related to the aged Baijiu . This study afford theoretical basis and reference for flavor research of Feng-flavored baijiu.

Metandienone and methyltestosterone are orally active anabolic-androgenic steroids with a 17α-methyl structure that are prohibited in sports but are frequently detected in anti-doping analysis. After the previously reported detection of long-term metabolites with a 17ξ-hydroxymethyl-17ξ-methyl-18-nor-5ξ-androst-13-en-3ξ-ol structure in the chlorinated metandienone analog dehydrochloromethyltestosterone (“Oral Turinabol”), in this study we investigated the formation of similar metabolites of metandienone and 17α-methyltestosterone with a rearranged D-ring and a fully reduced A-ring. Using a semi-targeted approach including synthesis of reference compounds, two diastereomeric substances, viz. 17α-hydroxymethyl-17β-methyl-18-nor-5β-androst-13-en-3α-ol and its 5α-analog, were identified following an administration of methyltestosterone. In post-administration urines of metandienone, only the 5β-metabolite was detected. Additionally, 3α,5β-tetrahydro-epi-methyltestosterone was identified in the urines of both administrations besides the classical metabolites included in the screening procedures. Besides their applicability for anti-doping analysis, the results provide new insights on the metabolism of 17α-methyl steroids with respect to the order of reductions in the A-ring, the participation of different enzymes, and alterations of the D-ring.

In this study, we demonstrate a high luminous efficacy of 118 lm/W and high reliability through 450°C thermal aging of white LEDs (WLEDs) utilizing four-inch YAG: Ce3+ phosphor-in-glass (PiG) plates designed for vehicle headlights. The sintering process of mixing glass and phosphor typically generates pores, which can scatter light and reduce the luminous efficacy of the fabricated PiG. In this study, we produced four-inch PiG plates under four different fabrication conditions to evaluate their luminous efficacy. Our results revealed that the PiG plate with a thin thickness of 0.08 mm exhibited a 16.83% increase in luminous efficacy compared to the 0.15 mm plate, attributed to reduced light interaction with the pores. Unlike silicone-based phosphor WLEDs, which offer high performance but lower reliability due to the silicone resin's low transition temperature (150°C), our novel thin PiG plate achieves high performance and reliability. This advancement suggests that the proposed thin PiG plate could replace traditional silicone-based phosphors, enabling the development of high-quality WLEDs for vehicle headlights in automotive applications.

Nowadays, colon cancer prognosis still difficult to predict, especially in the early stages. Recurrences remain elevated, even in the early stages after curative surgery. Carcidiag Biotechnologies has developed an immunohistochemistry (IHC) kit called ColoSTEM Dx, based on a MIX of biotinylated plant lectins that specifically detects colon cancer stem cells (CSCs) through glycan patterns that they specifically (over)express. A retrospective clinical study was carried out on tumor tissues from 208 non-treated and 21 treated patients with colon cancer, that were stained by IHC with the MIX. Clinical performances of the kit were determined, and prognostic and predictive values were evaluated. With 78.3% and 70.6% of diagnostic sensitivity and specificity respectively, our kit shows great clinical performances. Moreover, patient prognosis is significantly poorer when the MIX staining is “High” compared to “Low”, especially at 5-years of overall survival and for early stages. The ColoSTEM Dx kit allows an earlier and a more precise determination of patients’ outcome. Thus, it affords an innovating clinical tool for predicting tumor aggressiveness earlier and determining prognosis value regarding therapeutic response in colon cancer patients.

Student attrition poses significant societal and economic challenges, leading to unemployment, lower earnings, and other adverse outcomes for individuals and communities. To address this, predictive systems leveraging machine learning and Big Data aim to identify at-risk students early and intervene effectively. This project focuses on extracting key parameters from past dropout data to construct a predictive model and alert authorities to intervene promptly. Two preliminary trials refine machine learning models, establish evaluation standards, and optimize hyperparameters. These trials facilitate systematic exploration of model performance and data quality assessment. Achieving 100% accuracy in dropout prediction, the study identifies academic performance as the primary influencer, with early-year subjects like Mechanics and Materials, Design of Machine Elements, and Instrumentation and Control having significant impact. The longitudinal effect of these subjects on attrition underscores the importance of early intervention. Proposed solutions include early engagement and support or restructuring courses to better accommodate novice learners, aiming to reduce attrition rates.

Food waste is a common issue arising from grinding of food by experimental animals, leading to excessive food scraps falling into cages. In the wild, animals grind food by gnawing vegetation and seeds, potentially damaging the ecological environment. However, limited ecology studies have focused on food grinding behavior since the last century, with even fewer on rodent food grinding, particularly recently. Although food grinding function is partially understood, biological purposes remain under-investigated and driving factors unclear. This review aims to explain potential causes of animal food grinding, identify influencing factors, and discuss contexts and limitations. Specifically, we emphasize recent progress on gut microbiota significance for food grinding. Moreover, we show abnormal food grinding is determined by degree of excess normal behavior, emphasizing food grinding is not meaningless. Findings from this review promote comprehensive research on the myriad factors, multifaceted roles, and intricate evolution underlying food grinding behavior, benefiting laboratory animal husbandry and ecological environment protection, and identifying potential physiological benefits yet undiscovered.

Arthropods, the most abundant group in ecosystems, play crucial roles in human production. Soil physicochemical properties reflect soil health and are linked to arthropods through cascading effects. Gravel-sand mulching, commonly practiced in dry farming regions, initially aids in water retention and temperature regulation. However, long-term cultivation can lead to land degradation and habitat fragmentation. This study aimed to investigate field systems using multiple comparison, linear, and nonlinear correlation analyses to explore the effects of different tillage durations on soil properties and arthropod diversity under gravel-sand mulching. Results indicate that arthro-pod diversity was lower while the fields maintained better soil fertility than the desert steppe. Both soil fertility and arthropod diversity declined significantly with increased years of cultivation. Mantel tests revealed no significant response of desert steppe arthropods to the altered soil properties of gravel-sand mulched fields. However, the Generalized Additive Model analysis indicated significant linear correlations between arthropod occurrence and total nitrogen (positive), available phosphorus, and water content (negative). Arthropod abundance showed significant nonlinear correlations with total potassium, alkali hydrolyzable nitrogen, and organic matter (OM), with OM changes having the most pronounced impact. Thus, gravel-sand mulching can maintain soil fertility over time but at the expense of local arthropod diversity.

This study explores the integration of genome sequencing and polymerase chain reaction (PCR) based methods for tracking the diversity of Covid-19 variants in wastewater. The research focuses on monitoring various Omicron subvariants during a period of significant viral evolution. Genome sequencing, particularly using Oxford Nanopore Technology (ONT), provides a detailed view of emerging variants, surpassing the limitations of PCR-based detection kits that rely on known sequences. This study highlights the effectiveness of combining these methodologies to enhance early detection and inform public health strategies, especially in regions with limited clinical sequencing capabilities.

Background: Human papillomavirus (HPV) is diagnosed in most cervical cancers and is the fourth cause of cancer worldwide. Currently, fourteen HPV types are considered carcinogenic (HPV 16/18/31/33/35/39/45/51/52/56/58/59/66/68) with different oncogenicity. Cervical lesions might be due to HR (high risk)-HPV for what is important to identify new methods to genotype cervical lesions. The main goal was to identify, for the first time, HPV-HR in cervical lesions using Anyplex™ Detection kit in paraffin-embedded tissue. (2) Methods: It was performed a retrospective study in 45 women from Academic Hospital of Cova da Beira (CHUCB). DNA extraction was performed and through Anyplex™ II HPV-HR Detection kit HPV-HR were genotyped. (3) Results: HPV-HR were identified in 38 women; HPV-16 (55,26%), HPV-18/39/56/58/59 (5,26%), HPV-31 (21,05%), HPV-35 (7,89%), HPV-51/6 (2,63%) and HPV-52 (10,53%). (4) Conclusions: Our results reflect that Anyplex™ II HPV-HR Detection kit, designed for HR-HPV genotyping of cervical cancer screening, might be properly used to HR-HPV genotyping in histology. The proposed methodology allows an easy and cheaper technique that should be used as a future cervical risk stratification. It is a strong tool to be implemented in clinical practice in order to detect HR-HPV detection in cervical lesions, contributing to a more accurate diagnosis.

The pursuit of materials that offer both wear comfort and protection for functional and protective clothing has led to the exploration of weft-knitted spacer structures. Traditional cushioning materials such as spacer fabrics and laminated foam often suffer from deformation under compression stresses, thus compromising their protective properties. This study investigates the enhancement of the force absorption, stress-strain and thermal properties of weft-knitted spacer fabrics with inlays. Surface yarns with optimal stretchability and thermal properties are used and combined with elastic yarns in various patterns to fabricate nine different inlay samples. The mechanical and thermal properties of these samples are systematically analyzed, including their compression, stretchability, thermal comfort and surface properties. The results show that the inlay spacer fabric exhibits superior compression properties and thermal conductivity compared to traditional laminated foam and spacer fabrics, while maintaining stretchability, thus providing a better performance than traditional fabrics for protective clothing and wearable cushioning products. This study further confirms that the type of inlay yarn and inlay structure are crucial factors that significantly influence the thermal, tensile and compressive properties of fabric. This research provides valuable insights into the design and development of advanced textile structures to improve wear comfort and protection in functional garment applications.

Mental stress state recognition using electroencephalogram (EEG) signals for real-life applications needs a conventional wearable device. This requires an efficient number of EEG channels and an optimal feature set. The main objective of the study is to identify an optimal feature subset that can best discriminate mental stress states while enhancing the overall performance. Thus, multi-domain feature extraction methods were employed, namely, time domain, frequency domain, time-frequency domain, and network connectivity features, to form a large feature vector space. To avoid the computational complexity of high dimensional space, a hybrid feature selection (FS) method of minimum Redundancy Maximum Relevance with Particle Swarm Optimization and Support Vector Machine (mRMR-PSO-SVM) is proposed to remove noise, redundant, and irrelevant features and keep the optimal feature subset. The performance of the proposed method is evaluated and verified using four datasets, namely EDMSS, DEAP, SEED, and EDPMSC. To further consolidate, the effectiveness of the proposed method is compared with that of the state-of-the-art heuristic methods. The proposed model has significantly reduced the features vector space by an average of 70% in comparison to the state-of-the-art methods while significantly increasing overall detection performance.

A novel five-surface phosphor-in-glass (FS-PiG) for high illumination and excellent color uniformity in larger-scale LEDs for sensor light source application is demonstrated. YAG phosphor (Y3Al5O12:Ce3+) was uniformly mixed with ceramic and sintered at 680°C to form a phosphor wafer. A sophisticated laser engraving was employed on the phosphor wafer to form a saddle-shaped large-scale FS-PiG LEDs. The performance of the FS-PiG LEDs exhibited the illumination of 401lm, average color temperature (CCT) of 5488K±110K, and color coordinates (CIE) of (0.3179±0.003, 0.3352±0.003). In contrast to convention single-surface phosphor-in-glass (SS-PiG) LEDs, the performance exhibited the illumination of 380lm, average CCT of 5830K±758K, and CIE of (0.3083±0.07, 0.3172±0.07). These indicated that the performance of the FS-PiG LEDs was higher than the SS-PiG LEDs for illumination, CCT, and CIE of 1.7, 7, and 23 times, respectively. Furthermore, the FS-PiG LEDs demonstrate lower lumen loss of 2% and less chromaticity shift of 5.4x10-3 under accelerated aging at 350°C for 1008 hours, owing to the high ceramic melting temperature of up to 510°C. In this study, the proposed FS-PiG larger-scale LEDs having excellent optical performance and high reliability may be the promising candidates to replace the convention phosphor-in-organic silicone material used in high-power LEDs for the next generation of sensor light sources, display, and headlight applications.

In view of the fact that the field monitoring information can more intuitively and accurately reflect the stability state of slopes, this paper takes the warning threshold of slope deformation rate monitoring as the slope stability evaluation standard, and puts forward a method for solving the safety coefficient of rocky slopes. The discrete element method 3DEC, which is suitable for rocky slopes, is selected as the numerical calculation tool, and the convergence criterion of its strength reduction method is modified to the slope deformation rate threshold, and the method is realized by the bifurcation method through its built-in FISH programming language. The results of the classical case show that, by selecting the slope deformation rate threshold in the appropriate interval, the results of this paper's method are very close to those of the finite unit stress method and the limit equilibrium method, which verifies the reliability of this paper's method. Further, the method of this paper is applied to an open-pit mine slope project, based on the slope deformation on-site monitoring data, through the time series prediction method to determine the slope deformation rate warning threshold, using the threshold as an evaluation criterion to solve the slope's coefficient of safety, the calculation results show that: the slope's coefficient of safety in natural working conditions is 1.086, basically stable, suffered from continuous rainfall, the slope body is gradually saturated, the slope's coefficient of safety is reduced to 0.987, the slope's safety is reduced to 0.987. After continuous rainfall and gradual saturation of the slope, the coefficient of safety decreased to 0.987, destabilizing and destroying, which is consistent with the site conditions.

Our skin is constantly exposed to blue light (BL), which is abundant in sunlight and emitted by digital devices. Prolonged exposure to BL can lead to oxidative stress-induced damages and skin hyperpigmentation. In this study, we investigated the protective effects of tocotrienol-rich fraction (TRF) on BL-induced oxidative stress and hyperpigmentation in B16-F1 melanocytes. Alpha-tocopherol (αTP) was used as a comparator. Our results showed that TRF effectively suppressed the formation of reactive oxygen species, and preserved the mitochondrial membrane potential. Additionally, TRF exhibited anti-apoptotic properties by reducing the activation of p38 mitogen-activated protein kinase molecule and downregulating the expression of cleaved caspase-3. Moreover, TRF modulated tyrosinase activity, resulting in a lowered rate of melanogenesis and reduced melanin production. In contrast, αTP did not exhibit the significant protective effects against skin damages and pigmentation in BL-induced B16-F1 cells. Therefore, this study indicates that TRF may offer superior protective effects over αTP against the effects of BL on melanocytes. These findings demonstrate the potential of TRF as a protective natural active against BL-induced skin damages and hyperpigmentation via its antioxidative and anti-melanogenic properties.

Background: Constipation is one of the chronic gastrointestinal functional diseases that affects the quality of life. While Qi Lang Formula (QLF) has demonstrated effectiveness in alleviating constipation symptoms, its precise mechanism remains elusive. Methods: QLF was analyzed using UPLC-MS/MS. Targets for QLF were collected from SwissADME, Herb, ITCM databases, and FC-related targets from scRNA-seq and Genecards databases. Overlapping targets suggested potential QLF therapy targets for FC. Enrichment analysis used the KOBAS database. A "drug-ingredient-target" network was constructed with Cytoscape, and AutoDock verified active component binding. H&E staining assessed colonic mucosa changes, TEM examined ICC structural changes. ELISA measured neurotransmitter levels, and western blot verified QLF's effect on target proteins. ICC proliferation was observed through immunofluorescence. Results: We identified 89 targets of QLF associated with ICC-related FC, with c-Kit emerging as the pivotal target. Molecular docking studies revealed that Atractylenolide Ⅲ, Apigenin, Formononetin, Isorhamnetin, Naringenin, and Ononin exhibited strong binding affinities for the c-Kit structural domain. QLF significantly enhanced first stool passage time, fecal frequency, fecal moisture content, and intestinal propulsion rate. Further analysis unveiled that QLF not only restored neurotransmitter levels but also mitigated colon muscular fiber ruptures. ICC ultrastructure exhibited partial recovery, while RT-qPCR and western blot confirmed upregulated c-Kit expression and downstream targets. Immunofluorescence results indicated ICC proliferation post QLF treatment in rat colon. Conclusion: Our findings suggest that QLF may promote ICC proliferation by targeting SCF/c-Kit and its downstream signaling pathway, thereby regulating intestinal motility.

Pipelines are widely used globally, particularly in Nigeria, to transport raw and processed hydrocarbon fluids, including crude oil, from the point of production to the shore for export, processing facilities and distribution of refined products to depots for sales and consumption. Although pipelines are designed to withstand environmental and physical shocks, intermittently, pipelines are exposed to natural or human-induced conditions that damage pipelines and disrupt their functionality. These disruptions could result from operational defects or vandalism, causing an economic loss of up to US$ 658.5 million as observed in the Niger Delta from 1990 to 2022. Furthermore, product loss of about 705,100 barrels observed over the same period has caused environmental and social impacts, damaging the natural environment, destroying livelihoods supported by the ecosystem, and deteriorating the health of residents as documented in several literatures. To mitigate these issues and ensure the safe and reliable conveyance of crude oil in pipelines, measures must be taken to timely detect spillages and intervene during oil spillages to minimize damage and loss. Such detection methods include external, visual/ biological and internal/computation-based approaches. This paper uses a mixed-method approach to review the literature on the causes and impact of crude oil pipeline leakage in the Niger Delta region of Nigeria and highlights some methods that could be applied to detect pipeline leakage, as well as their strengths and inefficiencies. This paper further assesses the joint investigation visit mechanisms for oil spill response used in the oil and gas industry in Nigeria and identified that between 2006 to 2021, it took an average of 4 days to report oil spill occurrence, and 21 days to respond. Also, for 18 percent of the spill occurrences in that period, there were no JIV. This study suggests that the gap in the JIV mechanism can be addressed by integrating technology to enhance detectability and minimize the cost of monitoring. The paper also guides the way forward to develop and improve the reliability of pipeline leak detection systems.

This literature review paper delves into the synergies between Climate-Smart Agriculture (CSA) and the effective management of food losses. With the escalating challenges posed by climate change and the pressing need to address food security concerns, the intersection of these two critical domains becomes paramount for sustainable agricultural practices. The review explores existing research on the implementation of climate-smart agricultural techniques and their impact on mitigating food losses throughout the agricultural value chain. The paper synthesizes findings related to climate-resilient crop varieties, precision farming, water-use efficiency, and sustainable soil management, highlighting their contributions to reducing post-harvest losses and enhancing overall food security. In addition to summarizing current knowledge, this paper identifies gaps in the literature and proposes avenues for future research. This review serves as a foundation for researchers, policymakers, and practitioners seeking to contribute to the advancement of climate-smart agriculture and the reduction of food losses, paving the way for a more sustainable and resilient global food system.

The fluorine-less noble-gas containing anions OBONgO- and OCNNgO-have been studied by correlated electronic structure calculation and density functional theory. The obtained energetics indicates that for Ng = Kr and Xe, these anions should be kinetically stable at low temperature. The molecular structures and electron density distribution suggests that these anions are stabilized by ion-induced dipole interactions with charges concentrated on the electronegative OBO and OCN groups. The current study shows that in additional to the fluoride ion, polyatomic groups with strong electronic affinities can also form stable noble-gas containing anions of the type X-...NgO.

Halide perovskite materials gain enormous attention for their semiconducting properties, higher power conversion efficiency and potential applications in a wide range field of studies along with their two key limitations: stability and toxicity. In spite of great progress made on the halide perovskites and many promising research developments, overcoming these limitations is not realized yet. Therefore, coordination engineering of new framework for obtaining alternative new halide perovskite materials and fundamental understanding of the coordination chemistry and electronic interactions forming the structure of these newly engineered halide perovskite materials might be one way in order to overcome the issues related to both stability and toxicity. In this review, the current development of halide perovskite families, both lead halide perovskites and lead free halide perovskites followed by coordination engineering of the new frameworks to engineer new halide perovskite materials will be reviewed comprehensively. Moreover, all the concerns of the fundamental ideas of coordination chemistry and electronic interactions that are keys in forming the halide perovskite structures are discussed in detail and form the main aim of this review. Interestingly, we also discuss recent potential energy applications beyond photovoltaic and this review has completed with an essential and open question: ‘what could happen in the future of halide perovskites?’ in order to excite commercial enterprises and research institutions again as well as to get motivating new predictions on the future continuity of this field.

Background. The treatment for patients with high-grade gliomas includes radiation therapy and temozolomide. However, some patients do not respond to temozolomide because they have a methylation reversal mechanism through the enzyme O6-methylguanine-DNA-methyltransferase. This biomarker has been used as a prognostic factor in patients receiving treatment with temozolomide. However, not all patients respond in the same way, which suggests the existence of other genes involved in resistance to temozolomide. Materials and Methods. A group of 31 patients with high-grade gliomas was recruited and were clinically, image pattern, and pathologically characterized. The sequencing of 324 genes related to different types of cancer was performed to detect mutations. Subsequently, a statistical analysis was conducted to determine the mutated genes that were most related to resistance to treatment. Results. The genes related to the second relapse of patients with high-grade glioma after the use of temozolomide according to Stupp protocol and metronomic dose were PIK3C2B, KIT, ERBB3, and MLH1. Conclusions. Considering the results obtained, we suggest that the mutations in the four genes and the methylation of the gene promoter that codes for MGMT protein could be related to the clinical evolution of patients with high-grade gliomas and its response to treatment with temozolomide.

Food insecurity has adverse consequences on women and child health in a developing country. This study aims to fill the existing research gap by examining the dynamic impacts of food insecurity on women and child health outcomes, this study adds fresh large scale panel data; and unlike the existing studies, this study estimates the short-run dynamics on food insecurity on women as child health of developing countries. We found that there was a positive association between health expenditure, women's fertility rate, women, and child health outcomes. There was a negative and statistically significant impact of food insecurity on women anemia in developing countries of Asia. Overall, the empirical analysis found that there was a strong strength to be a negative correlation between food insecurity and women and child health outcome, particularly in relation to women’s participation as a productive labor force. The study suggests that there is need to multidimensional approaches such as women and child health outcome, is needed to advance this type of research areas and should be followed broad-spectrum policy interventions to improve the women and child health status as part of sustainable development goals.

To estimate the progressive collapse resistance capacity of a multi-column frame tube structure with the assembled truss beam composite floor (ATBCF), the pushdown analysis, and the nonlinear dynamic analysis as well, are conducted for such a structure by using the alternate load path (ALP) method. The bearing capacities of the remaining structures at three different work conditions, which are the side middle column failure, the edge middle column failure, and the corner column failure, are individually studied, and the collapse mechanism for the remaining structures is analyzed from the aspects of the internal force redistribution and the failure mode of the second defense line. Simultaneously, the influence of the column failure time on the dynamic response of the remaining structure and the dynamic amplification coefficient are discussed. The results show that the residual bearing capacity of the remaining structure with the bottom corner column failure is higher than that of the one with the side or edge middle column failure, while the latter has a stronger plastic deformation capacity. When the ALP method is adopted to operate the progressive collapse analysis, it is reasonable to take the column failure time as 0.1 times of the first-order vertical vibration period of the remaining structure, and it is suitable to set the dynamic amplification coefficient as of 2.0, which is the ratio of the maximum dynamic displacement to the static displacement of the remaining structure under the transient loading condition.

This study aimed to present a systematic meta-analysis examining the association between Helicobacter pylori (H. pylori) infection, hemoglobin A1c levels, and the development of type 1 diabetes mellitus. The initial search identified 451 articles related to the association between H. pylori infection and T1DM. Among them, 14 articles had 2,971 participants meeting the inclusion criteria for advanced meta-analysis. A significant association was observed between H. pylori infection and T1DM, with an odds ratio (OR) of 1.87 (95% confidence interval [CI]: 1.27–2.78, p = 0.002). A subgroup analysis on H. pylori status showed that a longer duration of diabetes diagnosis and higher hemoglobin A1c levels were significantly associated with H. pylori infection (p < 0.001 for both). However, there was no significant association between H. pylori infection and the diagnostic age of diabetes (p = 0.306). These findings contribute to the understanding of the association between H. pylori infection and T1DM, thereby highlighting the potential role of H. pylori in influencing the duration and glycemic control of diabetes.

The continental shale layers are more complex in matrix pore-microfracture interactions and connectivity characteristics under the influence of tuff devitrification, which limits the explicit understanding of the coupling relationship between wettability and pore structure, as well as hydrocarbon flow behavior. Therefore, the influence of tuffaceous components on the reservoir formation mechanism and oil-rich effect of the continental shale formation system is a critical issue to be solved. The Upper Triassic Yanchang Formation tuffaceous shale in Ordos Basin and the Middle Permian Jingjingzigou Formation tuffaceous shale in the southern margin of Junggar Basin is taken as the research objects, using whole-rock mineral composition analysis, FE-SEM observation and digital image processing and extraction, as well as wettability angle determination and spontaneous imbibition experiments to illustrate the influence of the difference of devitrification extent on reservoir pore connectivity and interfacial wettability in two different environments of freshwater and saline lacustrine basins, and summarize the reservoir formation differential pattern under the influence of devitrification. The results show that the saline lacustrine is significantly modified by devitrification. The pore plane porosity of the devitrified tuffaceous shales in the saline lacustrine is higher than that of the tuffaceous shales in the freshwater; the oleophilic of the saline lacustrine tuffaceous shales is better than that of the tuffaceous shales in the freshwater, moreover, the pore connectivity of the saline lacustrine tuffaceous shales is better than that of the tuffaceous shales in the freshwater. Wettability and connectivity control the storage performance of shale oil in the tuffaceous shales formation system. The more oleophilic the reservoir wettability is, the better the pore connectivity is, and the better the reservoir of tuffaceous shale formation system is. According to the different extents of devitrification, two different reservoir formation models of freshwater and saline lacustrine are established, which are of great theoretical and practical significance to enrich the theory of shale oil enrichment and reservoir formation in the continental shale formation system and to guide the exploration of continental shale oil benefits.

Buckling defect will appear on the outer surface of the deformed ring during constrained ring rolling (CRR) of aluminum alloy thin wall conical ring with inner high ribs (AATWCRIHR), if the geometrical dimension of the ribs doesn't match the wall thickness. To avoid the buckling defect, a quantitative method for characterizing the degree of the buckling defect is proposed using the area of buckling profile. Then an orthogonal experimental scheme was designed taking the width of the middle rib, thickness of wall, and height of the middle rib as design variables and defining the area of buckling profile as optimization objective. Subsequently, a quadratic polynomial response surface model was established by combining the optimization algorithm with the finite element method (FEM), and the geometrical dimension of the middle ribs of the deformed AATWCRIHR is optimized. Also the optimal parameter combination to minimize the area of buckling profile is obtained and verified using FE simulation. Results show that the AATWCRIHR after optimization doesn’t generate the buckling defect during constrained ring rolling, and it is proved that the quantitative buckling defect representation method and the optimization design method based on the response surface model and the finite element simulation results are feasible for the constrained ring rolling process of the AATWCRIHR.

Concrete cracks and local damage can affect the bond performance between concrete and steel bars, thereby reducing the durability of reinforced concrete structures. Compared with general concrete crack repair methods, biomineralization repair not only has effective bonding capabilities but is also particularly environmentally friendly. In view of this, this study aimed to apply biomineralization technology to repair damaged fiber-reinforced lightweight aggregate concrete (LWAC). Two groups of LWAC specimens were prepared. The control group used lightweight aggregates (LWAs) without bacterial spores and nutrient sources, and the experimental group used LWAs containing bacterial spores and nutrient sources. These specimens were first subjected to compression tests and pull-out tests, respectively, and thus were damaged. After the damaged specimen healed itself in different ways for 28 days, secondary compression and pull-out tests were conducted. The self-healing method of the control group involved placing the specimens in an incubator. The experimental group was further divided into experimental group I and experimental group II. The self-healing method of experimental group I was the same as that of the control group. The self-healing method of experimental group II involved soaking the specimen in a mixed solution of urea and calcium acetate for two days, and then taking it out and placing it in an incubator for two days, with a cycle of four days. The test results showed that, compared with the control group specimens, the relative bond strength ratio of the experimental group II specimens increased by 17.9%. Moreover, the EDS and XRD analysis results confirmed that the precipitate formed at the crack was calcium carbonate, which improved the compressive strength and bond strength after self-healing. This indicates that the biomineralization maintenance method used in experimental group II is more effective.

The article delves into the intricate phase transitions of 1-Octadecanol and n-Nonadecane within a binary system, unveiling dynamic structural changes under varying conditions. Through Fouri-er-transform infrared (FTIR) analysis, specific molecular vibrations were identified, shedding light on the molecular composition and interactions. The study highlights the challenges in detecting subtle phase transitions and emphasizes the individuality of molecular behaviours in closely related compounds. The findings underscore the complexity of phase transitions in binary systems and advocate for a nuanced approach to studying molecular structures and behaviours. Addi-tionally, the research contributes valuable insights into the molecular dynamics of Organic Polymer Functional Adsorption Materials, offering implications for synthetic waxy layers in plant epidermis.

Structural health monitoring has been studied by a number of researchers as well as various industries to keep up with the increasing demand for preventive maintenance routines. This work presents a novel method for reconstruct prompt, informed strain/stress responses at the hot spots of the structures based on strain measurements at remote locations. The structural responses measured from usage monitoring system at available locations are decomposed into modal responses using empirical mode decomposition. Transformation equations based on finite element modeling are derived to extrapolate the modal responses from the measured locations to critical locations where direct sensor measurements are not available. Then, two numerical examples (a two-span beam and a 19956-degree of freedom simplified airfoil) are used to demonstrate the overall reconstruction method. Finally, the present work investigates the effectiveness and accuracy of the method through a set of experiments conducted on an aluminium alloy cantilever beam commonly used in air vehicle and spacecraft. The experiments collect the vibration strain signals of the beam via optical fiber sensors. Reconstruction results are compared with theoretical solutions and a detailed error analysis is also provided.

Amylin, also known as islet amyloid polypeptide (IAPP), is a metabolic homeostasis-related hormone that is produced and released by the β cells of the pancreas, the same cells that produce insulin. Insulin-degrading enzyme (IDE) is a protease enzyme that plays an essential role in the breakdown and degradation of various peptides, including insulin and amylin. Direct binding & interaction between amylin and IDE is inextricably linked to the degradation of amylin, and research and development effort in this area is crucial to understand the potential therapeutic implications of disrupting the IDE-amylin interaction in the context of conditions where metabolic homeostasis needs to be regulated, such as diabetes and obesity. Here, this article incorporates currently available experimental complex structure of amylin and IDE, and delves deep into the interstructural biophysics underlying the binding interface of the two interacting partners. With a set of comprehensive structural biophysical analysis, this article identified an intriguing region of high electrostatic potential indicative of strong binding sites between the first N-terminal lysine (Lys1, K1) residue of amylin and Glu341 (E341) of IDE. This unique electrostatic hotspot presented herein paves the way for the rational design of drug-like small molecules that can selectively disrupt this interaction, offering a targeted therapeutic strategy for improved metabolic homeostasis, particularly for patients with diabetes and obesity.

Acting as the most abundant and widely distributed volatile secondary metabolites in plants, terpenoids play crucial roles in diverse physiological regulations and metabolic processes. Terpene synthases occupy a decisive proportion in determining the composition and diversity of terpenoids; though their regulatory effects have been extensively investigated across various plant species, limited studies have focused on the upstream transcriptional regulation of terpene synthases. In this study, we unveil linalool as the predominant volatile compound in Freesia hybrida flowers, demonstrating a gradual release pattern during flower blooming. In the context of the transcriptome, a typical MYB transcription factor, FhMYB108, was screened based on digital expression profile correlation analysis and homologous gene comparison. FhMYB108 is capable of regulating the expression of terpene synthase FhTPS1, and both their expression levels exhibit a gradual increase concomitant with flower opening. Moreover, transcriptional regulation and transient expression assays revealed that FhMYB108 exerts a stimulatory effect on the transcription of A. thaliana AtTPS14, while no significant increase in AtTPS14 expression was observed upon stabilization of FhMYB108 in Arabidopsis. Investigate its reason, the highly expressed AtMYC2 in A. thaliana can interact with FhMYB108 to suppress the activation of AtTPS14 by FhMYB108. The present study not only elucidated the regulatory mechanism underlying linalool synthesis, but also discovered the synergistic effect of MYB and bHLH transcription factors in governing the biosynthesis of volatile terpenoids.

Spacecraft recovery technology is crucial in the field of aerospace, in which the parachute plays a key role in slowing down the descent speed of the spacecraft and realizing a smooth landing. In order to construct a dynamically adjustable parachute deployment strategy, it is necessary to measure the parachute dynamic load accurately in real time. However, the existing sensor measurement scheme is difficult to meet the measurement requirements due to its large structure and complex wiring. In order to meet the current demand for real-time measurement of parachute cords dynamic load, a miniature measuring instrument is designed.According to the function and technical requirements of the miniature measuring instrument, the hardware modules of the acquisition system are selected and designed, and the integration debugging and performance optimization of the microcontroller module, A/D sampling module, signal acquisition circuit and power supply module are carried out. The software of the parachute cords tension acquisition system based on the miniature measuring instrument is developed. The elastomer is modeled by using SolidWorks and statically analyzed by using AnsysWorkbench finite element analysis software. Then the final structure of the elastomer and the pasting position of the strain gage are determined through the results analysis as well as experimental verification. The hardware module of the signal acquisition system for the miniature measuring instrument is then encapsulated. The force value of the miniature measuring instrument is calibrated and tested many times by using the microcomputer-controlled electronic universal testing machine. The experimental results show that the designed miniature measuring instrument has accurate data, strong stability and good real-time performance, which meets the demand for real-time accurate measurement of miniature measuring instrument, and can provide reliable data for parachute cords parameter validation and stepless unfolding design.

The intestinal microbiota, comprised of bacteria, archaea, and phages, inhabits the gastrointestinal tract of the organism. Male reproductive sterility is currently a prominent topic in medical research. Increasing research suggests that gut microbiota dysbiosis can result in various reproductive health problems. This article specifically investigates the impact of gut microbiota dysbiosis on male reproductive infertility development. Gut microbiota imbalances can disrupt the immune system and immune cell metabolism, affecting testicular growth and sperm production. This dysfunction can compromise the levels of hormones produced and secreted by the endocrine glands, affecting male reproductive health. Furthermore, imbalance of the gut microbiota can disrupt the gut-brain-reproductive axis, resulting in male reproductive infertility. This article will explore how the imbalance of the gut microbiota impacts male reproductive infertility through immune regulation, endocrine regulation, and interactions of the gut-brain-reproductive axis, concluding with recommendations for prevention and treatment.

Since the launch of Protein Data Bank (PDB) in 1971, Cartesian coordinate system (CCS) has been the default approach to specify atomic positions in biomolecular experimental structures with X, Y and Z. In 2020, a local spherical coordinate system (LSCS) approach was proposed as an alternative to CCS, i.e., ρ, θ and φ. Recently, the continued application of deep learning technology in protein structure prediction (PSP) saw a leap forward in the accuracy of PSP, as evidenced by AlphaFold of Google’s DeepMind. However, there still is room for the improvement of the performances of PSP algorithms to date. Given that geometrically, CCS and LSCS are like the two sides of a coin, this short article puts forward a hypothesis that the time is now ripe to end the half-a-century burial of ρ, θ and φ in PDB, and use them as LSCS features for the design of novel PSP algorithms in future.

Understanding the spatial distribution pattern and evolution characteristics of the elderly population in urban areas is of great significance for the development of urban planning and the implementation of public management policies in the context of rapid aging. Accurately identifying the spatial distribution and evolution characteristics of the elderly population in the city requires a comprehensive analysis of multiple indicators and large-scale data. Taking Wuhan city as an example, this article measures the spatial distribution characteristics and evolution trend of the elderly population from 2000 to 2020 at the street/township level, based on the fifth, sixth, and seventh census data, using methods such as kernel density hotspot detection, spatial clustering analysis, and standard deviation ellipse analysis. The results show that: ① there are significant differences in the aging spatial pattern between the central area and the suburban areas of Wuhan; ② overall, Wuhan's aging rate shows a typical "core-periphery" growth mode in space, while the density of the elderly population has significant spatial aggregation characteristics and shows an evolution trend of "centralized concentration, peripheral outliers, axial development, and near-field growth"; ③the center of gravity of the elderly population remains relatively stable over time.

Because Newton's gravity and Einstein's general theory of relativity are macroscopic gravitational theories, therefore, this paper attempts to establish a set of quantum gravity theory of the microscopic expression of Newton's and Einstein's theory of gravity to make up for the shortcomings of the existing macro-gravity theory at the micro level, and further develop the macroscopic gravity theory into the microscopic field. Based on the cognition of the field theory model, from the general assumption, space-time is further regarded as an ideal fluid, from the perspective of the distribution of ideal fluid density, this paper derives the Newton's universal gravitational equation and Einstein's general relativity equation. On the micro level, the gravitational field is further interpreted as a gradient field of space-time density; the Newtonian potential is further interpreted as the density of an object at the micro level; gravity is further interpreted as the potential pressure(space-time pressure) exhibited by the gradient of the density of the object at the micro level; flection space-time is further interpreted as the embodiment of the gradient distribution of the ideal fluid (space-time) density at the micro level. Based on a modified gravitational model, it explains the dynamics of the stars' rotation and revolution.

Reminding the courier through wearable artificial intelligence devices to prevent accidents is not only beneficial to the courier's safety but also will save a lot of insurance premiums for express companies, therefore, it is worth investigating what factors can influence the acceptance of wearable artificial intelligence devices by couriers. Push-pull-mooring (PPM) theory and affective event theory (AET) are integrated to test couriers’ adoption to wearable safety detection devices. Social influence, perceived security, personal innovativeness and affective event reaction are applied to research model. Questionnaires are distributed among several listed express companies and 263 valid questionnaires are used for empirical test. Empirical results indicated that social influence, perceived safety, personal innovativeness and affective event reaction are positively related to usage with coefficients 0.218, 0.301, 0.698 and 0.309. Personal innovativeness has positively moderating effects on relationships between affective event reaction, perceived security and usage with coefficients 0.145 and 0.106, whereas has no significant moderating effect on relationship between social influence and usage. The research aims to help support the proliferation and adoption of wearable artificial intelligence devices to optimize the current state of the express industry and improve the interaction between couriers and managers, creating an active management strategy that will allow express companies to thrive. This study can help express companies reduce insurance costs and therefore reduce the premium pricing of insurance companies for the courier industry.. This study also provides design suggestions for the application of wearable artificial intelligence devices based on chat GPT in various working conditions.

In this paper, the computational fluid dynamics (CFD) method has been used to simulate the gas flow and the catalytic hydrogenation process of the C-2 hydrogenation adiabatic reactor in a practical ethylene production unit of a chemical plant. The laminar finite-rate model was used for the chemical reaction model. The standard two-equation model was used for the turbulence model. The exponent-function kinetic model was used for the reaction dynamics model. The simulation results were in good agreement with the actual industrial data obtained from the C-2 hydrogenation reactor, and the distributions of reaction parameters such as temperature and component concentrations in the reactor were further analyzed. Based on the validated CFD models, the structure and operating conditions of the reactor, as well as hydrogen load distribution ratios, are simulated for comparing the comprehensive performance metrics of ethylene selectivity and acetylene conversion rate; as a result, we can obtain the optimal temperature of 312 K, the optimal hydrogen/acetylene ratio of 0.10 as well as the optimal hydrogen load distribution ratio of 4:4:2, and the diameter/height ratio exerts a marginal effect on the selectivity, conversion rate and harmonic mean of the reactor.

The value of an NBA basketball player varies at each crucial point in time, depending on the player’s career and performance. This study constructs a player’s value assessment model. The model comprises two parts. First, from an objective perspective, entropy is employed to measure each player’s achievement in five categories—rebounds, assists, steals, blocked shots, and scores. The total entropy assessment value is calculated and then combined with the players’ scores to develop a player's value matrix to assess the relative value model among players of the same type.

The involvement of NK and other cytotoxic cells is considered the first defense' line against cancer. However, a significant lack of information prevails on the possible roles played by factors considered characteristic of primitive cells, such as c-kit and Sca-1, in activating these cells, particularly in melanoma models subjected to treatments with substances under investigation, such as the case of norcantharidin. In this study, B16F1 murine melanoma cells were used to induce tumors in DBA/2 mice, estimating the proportions of NK and iNKT cells, the presence of activation (CD107a+) and primitive/activation (c-kit+/Lya6A+) markers, some tumor parameters, such as the presence of mitotic bodies, nuclear factor area, NK and iNKT cell infiltration in the tumor, infiltrated tumor area, and infiltrating lymphocyte count at 10x and 40x in specimens treated with pentoxifylline, norcantharidin and the combination of both drugs. Possible correlations were estimated with Pearson's correlation analysis. Despite having demonstrated multiple correlations, it should be noted that immaturity/activation markers were related to these cells' activation. At the tumor site, iNKT cells are the ones that exert the cytotoxic potential on tumor cells, but they are confined to specific sites in the tumor. Due to the higher number of interactions of natural killer cells with tumor cells, it is concluded that the most effective treatment was PTX at 60 mg/kg + NCTD at 0.75 mg/kg.

Pore structure characterization and fractal analysis have great significance for understanding and evaluating tight limestone reservoirs. In this work, the pore structure of tight limestone is characterized combined with low-temperature nitrogen adsorption (LTNA) and low-field nuclear magnetic resonance (NMR), and the fractal dimension of tight limestone pore structure is discussed based on LTNA and NMR data. The results indicate that the pores of tight limestone have H3 and H4 types, the pore size distribution (PSD) of H3 type is a wave distribution ranging from 2 to 10 nm, and the PSD of H4 type is a unimodal distribution ranging from 2 to 10 nm. The transverse relaxation time (T2) spectrum of tight limestone shows single peak (DF), double peak (SF) and three peak (TF), and the T2 spectrums for micropores, mesopores and macropores range from 0.1 to 10 ms, from 10 to 100 ms, and greater than 100 ms, respectively. The LTNA fractal dimension of tight limestone (DL) ranges between 2.4446 and 2.7688, with an average of 2.5729, and the NMR fractal dimensions of micropores (DNMR1), mesopores (DNMR2) and macropores (DNMR3) are distributed between 0.3744 to 1.1293, 2.4263 to 2.9395 and 2.6582 to 2.9989, respectively. Moreover, there is no correlation between fractal dimension and permeability and porosity, a negative correlation between DL and average pore radius, a positive correlation between DL and specific surface area, and a positive correlation between DNMR2 and DNMR3 and micropore content, while DNMR2 and DNMR3 are negatively correlated with the content of mesopores and macropores.

The foot-mounted inertial navigation system is an important application of pedestrian navigation as it in principle does not rely any external assistance. A real-time range decomposition constraint method is proposed in this paper to combine the information of dual foot-mounted inertial navigation systems. It is well known that low-cost inertial sensors with ZUPT (zero-velocity update) and range decomposition constraint perform better than in either single way. This paper recommends that the distance of separation between the position estimates of feet-mounted inertial navigation systems be restricted in the ellipsoidal constraint which relates to the maximum step and leg height. The performance of the proposed method is studied utilizing experimental data. The results indicate that the method can effectively correct the dual navigation systems’ position over the existing spherical constraint.

Day-ahead forecasting of electricity prices is important in deregulated electricity markets for all the stakeholders: energy wholesalers, traders, retailers, and consumers. Electricity price forecasting is an inherently difficult problem due to its special characteristic of dynamicity and non-stationarity. In this paper, we present a robust price forecasting mechanism that shows resilience towards aggregate demand response effect and provides highly accurate forecasted electricity prices to the stakeholders in a dynamic environment. We employ an ensemble prediction model in which a group of different algorithms participate in predicting the price for each hour of a day. We propose two different strategies, namely, Fixed Weight Method (FWM) and Varying Weight Method (VWM), for selecting each hour's expert algorithm from the set of participating algorithms. In addition, we utilize a carefully engineered set of features selected from a pool of features derived from information such as past electricity price data, weather data, and calendar data. The proposed ensemble model offers better results than both the Pattern Sequence-based Forecasting (PSF) method and our own previous work using Artificial Neural Networks (ANN) alone do on the datasets for New York, Australian, and Spanish electricity markets.

Insulin icodec of Novo Nordisk is a novel long-acting insulin analogue that exhibits an extended duration of action, providing a promising treatment option for individuals with diabetes. It has been reported that the incorporation of fatty acid moieties into insulin icodec plays a crucial role in its prolonged action, as these fatty acid chains facilitate the formation of stable hexameric structures, thereby delaying insulin absorption and promoting sustained release. Yet, the underlying biophysics still is elusive of the roles of the three site-specific mutations (Y14A\_E, Y37B\_H, F46B\_H) of insulin icodec in its prolonged activity. Thus, through a comprehensive structural and biophysical analysis of the insulin (both native and icodec) structures bound to its receptor, this article delves deep into the biophysics underlying the molecular design of insulin icodec, and identified a delicate biophysical mechanism through which two missense mutations of insulin icodec (Y37B\_H and F46B\_H) contribute to its prolonged duration of action. Overall, this structural and biophysical investigation provides valuable insights into the mechanisms underlying the relationship between three site-specific mutations and prolonged duration of action of insulin icodec, while understanding these modifications at a structural and biophysical level can aid in the rational design of future long-acting insulin analogues, offering further enhanced therapeutic options for diabetic patients.

Introduction: The presence of multiple comorbidities increases the risk of all-cause mortality, but the effects of the comorbidity sequence before the baseline date on mortality remained unexplored. This study investigated the relationship between coronary heart disease (CHD), atrial fibrillation (AF) and heart failure (HF) sequence on all-cause mortality risk in type 2 diabetes mellitus. Methods: This study included patients with type 2 diabetes mellitus prescribed antidiabetic/cardiovascular medications in public hospitals of Hong Kong between January 1st, 2009 and December 31st, 2009 with follow-up until death or December 31st, 2019. Cox regression was used to identify comorbidity sequences predicting all-cause mortality in patients with different medication subgroups. Results: A total of 249291 patients (age: 66.0±12.4 years, 47.4% male) were included. At baseline, 7564, 10900 and 25589 patients had AF, HF and CHD, respectively. Over follow-up (3524±1218 days), 85870 patients died (mortality rate: 35.7 per 1000 person-years). Sulphonylurea users with CHD developed later, but insulin users with CHD developing earlier, in the disease course had lower mortality risks. Amongst insulin users with two of the three comorbidities, CHD with preceding AF (hazard ratio [HR]: 3.06, 95% CI: [2.60-3.61], p<0.001) or HF (HR: 3.84 [3.47- 4.24], p<0.001) had a higher mortality. In users of lipid-lowering agents with all three comorbidities, those with preceding AF had higher risk of mortality (AF-CHD-HF: HR: 3.22, [2.24-4.61], p<0.001; AF-HF-CHD: HR: 3.71, [2.66-5.16], p<0.001). Conclusion: The sequence of comorbidity development affects the risk of all-cause mortality to varying degrees in diabetic patients on different antidiabetic/cardiovascular medications.

Esophageal cancer (EC) is one of the most common malignant tumors worldwide, and its two major types, esophageal adenocarcinoma (EAC) and esophageal squamous cell carcinoma (ESCC) present a severe global public health problem with an increasing incidence and mortality. Established risk factors include smoking, alcohol consumption, and dietary habits, but recent research highlights the substantial role of oral microbiota in EC pathogenesis. This review explores the intricate relationship between microbiome and esophageal carcinogenesis, focusing on eight significant mechanisms: chronic inflammation, microbial dysbiosis, production of carcinogenic metabolites, direct interaction with epithelial cells, epigenetic modifications, interaction with gastroesophageal reflux disease (GERD), metabolic changes, and angiogenesis. Certain harmful bacteria, such as Porphyromonas gingivalis and Fusobacterium nucleatum, are specifically implicated in sustaining irritation and tumor progression through pathways including NF-κB and NLRP3 inflammasome. Additionally, the review explores how microbial byproducts, including short-chain fatty acids (SCFAs) and reactive oxygen species (ROS), contribute to DNA harm and disease advancement. Furthermore, the impact of reflux on microbiota composition and its role in esophageal carcinogenesis is evaluated. By combining epidemiological data with mechanistic understanding, this review underscores the potential to target microbiota-immune system interplay for novel therapeutic and diagnostic strategies to prevent and treat esophageal cancer.

Three cases of Day-Night Band (DNB) observations of the Visible Infrared Imaging Radiometer Suite (VIIRS) onboard the Suomi National Polar-orbiting Partnership (SNPP) are explored for applications to assess the ocean environment and monitor ocean dynamics. An approach to use the DNB radiance ratio was developed in order to better continuously assess the ocean diurnal and short-term environmental changes with VIIRS DNB observations. In the La Plata River Estuary, the sediment fronts showed 20–25 km diurnal inshore-offshore movements on March 13, 2017. In the waters off the Argentina coast in the South Atlantic, VIIRS DNB measurements provided continuous observations and monitoring of the algae bloom development and migration between 24–26 March 2016. This algae bloom generally kept the same spatial patterns, but moved nearly 20 km eastward in the three-day period. In the Yangtze River Estuary and Hangzhou Bay region in China’s east coast, VIIRS DNB observations also revealed the complicated coastal dynamic changes between 12–14 April 2017. Even though there are still some challenges and limitations for monitoring the ocean environment with VIIRS DNB observations, this study shows that satellite DNB observations can provide additional data sources for ocean observations, especially observations during the nighttime.

Trenchless technologies are utilized for installing new pipes or repairing and replacing old ones, categorized into construction and rehabilitation/replacement methods. With rapid urbanization, new pipe networks must be established in proportion to population growth. Additionally, due to issues like corrosion and aging, a significant portion of storm sewers, waste sewers, gas, and water pipes need annual replacement or rehabilitation. Traditional open-cut methods are no longer viable due to traffic disruption, safety concerns, environmental impacts, and high costs. Trenchless construction methods address these issues effectively. Construction trenchless methods include horizontal earth boring (no worker entry), pipe jacking, and utility tunneling (worker entry). Horizontal earth boring is further divided into horizontal auger boring, horizontal directional drilling, pipe ramming, microtunneling, pilot tube microtunneling, and compaction methods. The first part of the current study reviews and discusses the design criteria for horizontal auger boring, horizontal directional drilling, pipe jacking, pipe ramming, and microtunneling. Based on these unique project requirements, the optimal trenchless technology can be proposed. In the second part of the research, a hierarchical algorithm is proposed, based on literature concepts, to serve as a decision-making tool for selecting the optimal trenchless construction method. Sometimes, multiple methods may be proposed, with the best one chosen based on equipment availability, skilled teams, budget, and sustainability principles. Although trenchless renewal methods are not the focus of this study, their design criteria are provided in the appendices to offer a comprehensive collection of design requirements for all trenchless technologies.

Classical mechanics describes the laws of motion in the macroscopic material world, while quantum mechanics describes the laws of motion in the microscopic material world that classical mechanics cannot explain, and achieves a highly accurate mathematical representation of the laws of microscopic physical motion. But even with such a successful theory, there is confusion about the probability wave. Therefore, this paper attempts to improve the physical definition of the conceptual basis of quantum mechanics, thus solving the confusion of quantum mechanical probability waves, and finally surprisingly discovered another feasible interpretation of the principle of cosmic redshift and the invariance of the speed of light.

The importance of antibodies in health care and the biotechnology research and development demands not only knowledge of their experimental structures at high resolution, but also practical implementation of this knowledge for both effective and efficient design and production of antibody for its use in both medical and research applications. While the experimental wet-lab approach is usually costly, laborious and time-consuming, computational (dry-lab) approaches, in spite of their intrinsic limitations in comparison with its experimental (wet-lab) counterpart, provide a cheaper and faster alternative option. For the first time, this article reports a comprehensive set of structural electrostatic features extracted from experimentally determined antigen-antibody-related structures, including especially those structural electrostatic features at the interfaces of all experimentally determined antigen-antibody complex structures as of February 29, 2020, to facilitate effective and efficient machine learning-based computational antibody design using currently available experimental structures inside Protein Data Bank.

Background: the Investigator ESSplex SE QS Kit (Qiagen) is a next generation PCR kit that, in 60 minutes, amplifies 17 STRs markers, including the 5 European Standard Set (ESS) loci, the SE33 marker and the locus Amelogenin for sex determination. Two Quality Sensors (QS1 and QS2) are co-amplified to check PCR performance. Since forensic laboratories carry out annually hundreds of DNA typing, we verified the kit performance using half reaction volumes with the aim to improve the number of samples that may amplified with a kit, reducing consequently the laboratory costs. Methods: in the study, that is intended as a technical note and not an internal validation, were analyzed control samples (oral swabs) with known DNA profiles and 40 real caseworks samples. Results: we observed that reducing the total reaction volume, while keeping unaltered all components ratio’s, yields DNA profiles comparable to the ones obtained using standard reaction volumes and with alleles peaks higher than with standard volumes.. Conclusions: the use of half volumes for PCR amplification allows the analysis of a wider number of samples than the standard protocol, reducing laboratory costs while maintaining unaltered the quality level of the analysis.

Hypoxic-ischemic encephalopathy (HIE) is one of the most common causes of childhood disability. Hypothermic therapy is currently the only approved neuroprotective approach. However, early diagnosis of HIE can be challenging, especially in the first hours after birth when the decision to treat with hypothermic therapy is critical. Differentiating HIE from other neonatal conditions, such as sepsis, further complicates the diagnosis. This study investigated the utility of a metabolomic-based approach using the NeoBase 2 MSMS kit to diagnose HIE using dry blood stains in a Rice-Vannucci model of HIE in rats. We evaluated the diagnostic accuracy of this method between 3 and 6 hours after the onset of HIE, including in the context of systemic inflammation and concomitant hypothermic therapy. Discriminant analysis revealed several metabolite patterns associated with HIE. A logistic regression model using glycine levels achieved high diagnostic accuracy with areas under the curve (AUC) of 0.94 at 3 hours and 0.96 at 6 hours after the onset of HIE. In addition, orthogonal partial least squares discriminant analysis, which included five metabolites, achieved 100% sensitivity and 80% specificity within 3 hours of HIE. These results highlight the significant potential of the NeoBase 2 MSMS kit for the early diagnosis of HIE and could improve patient management and outcomes in this serious illness.

NongXiangXing Baijiu (NBJ) is produced using a solid-state fermentation system, but the impact of stratified fermented grains on fermentation remains unclear. Therefore, in a typical distillery plant, we evaluated the physical and chemical composition, volatile compound profile, and microbial community of fermented grains in NBJ both above (FG-A) and below (FG-B) the Huangshui line. Significant differences in fermentation parameters between FG-A and FG-B were observed after 30 days of fermentation (P < 0.05). Additionally, the partial least squares projection to latent structure discriminant analysis (PLS-DA) revealed distinct differences in volatile compounds between FG-B and FG-A, identifying 26 discriminant markers. The diversity of short-chain fatty acids (SCFAs) and their esters was higher in FG-B compared to FG-A. Furthermore, microbial diversity and abundance differed significantly between the two layers of fermented grains (P < 0.05). Correlation and pathway enrichment analyses indicated that the higher SCFA content in FG-B could be attributed to the greater abundance of acid-producing microorganisms compared to FG-A. This study highlights the differences between the two layers of fermented grains in NBJ fermentation, offering new insights into solid-state fermentation and expanding the current understanding of the traditional NBJ fermentation process.

We consider the financial planning problem of a retiree wishing to enter a retirement village at a future uncertain date. The date of entry is determined by the retiree's utility and bequest maximisation problem within the context of uncertain future health states. In addition, the retiree must choose optimal consumption, investment, bequest and purchase of insurance products prior to her full annuitisation on entry to the retirement village. A hyperbolic absolute risk-aversion (HARA) utility function is used to allow necessary consumption for basic living and medical costs. The retirement village will typically require an initial deposit upon entry. This threshold wealth requirement leads to exercising the replication of an American put option at the uncertain stopping time. From our numerical results, active insurance and annuity markets are shown to be a critical aspect in retirement planning.

The joint extraction of entities and relations is a critical task in information extraction, and its performance directly affects the performance of downstream tasks. However, existing joint extraction models based on deep learning exhibit weak processing capabilities for the phenomenon of multiple pronunciations of one character and multiple characters of one pronunciation when processing Chinese texts, resulting in performance loss. To address these issues, this paper introduces part-of-speech (POS) and pinyin features to aid the model in learning semantic features that are more contextually appropriate. A Chinese Joint Entity and Relation Extraction Model based on Progressive Contrastive Learning and Heterogeneous Feature Fusion is proposed (CJE-PCHF). During model training, an interactive fusion network based on progressive contrastive learning is employed to learn the dependencies between pinyin, POS, and semantic features. This guides the model in heterogeneous feature fusion, capturing higher-order semantic associations between heterogeneous features. On the commonly used DuIE evaluation dataset for joint extraction, this model achieved a significant improvement, with the F1 score increasing by 5.4% compared to the benchmark model CasRel.

The spike protein of SARS coronavirus (SARS-CoV) attaches the virus to its cellular receptor, angiotensin-converting enzyme 2 (ACE2), which is mediated by the receptor binding domain (RBD) of the spike protein. Recently, an analysis based on decade-long structural studies of SARS was reported to illustrate with atomic-level details receptor recognition by the novel coronavirus from Wuhan, i.e., 2019-nCoV. Here, this article reports a comprehensive set of structural electrostatic analysis of all SARS-CoV spike protein RBD-related structures as of February 13, 2020, aiming at identifying the electrostatic hot spots for SARS-CoV spike protein to be complexed with ACE2 and its neutralizing antibodies. First, this article identified a structural action mechanism of the F26G19 antibody (of SARS-CoV spike protein), where its Asp56 residue binds to the Arg426 of the SARS-CoV spike protein RBD against the formation of the interfacial Arg426-Glu329 salt bridges between ACE2 and the SARS-CoV spike protein RBD. Second, a hypothesis is reported that a pair of electrostatic clips exist at the interface between ACE2 and the SARS-CoV spike protein RBD, including both Arg426-Glu329 and His445-Glu23-Lys447 salt bridges. Last, this article reports a structurally identified interfacial Glu35-Arg479 salt bridge which helps stabilize the complex structure of ACE2 and the SARS-CoV spike protein RBD. Overall, the structurally identified electrostatic hot spots reported here may be useful for the design of SARS-CoV-neutralizing antibodies in future.

The pre-chamber technologies can improve the ignition performance of IC engines by more than two orders in magnitude and thereby substantial economic benefits. Compared with the common pre-chamber, a plug-and-play passive scheme is suitable for quick retrofit, which is getting more attention from the automobile industry. Good scavenging is the precondition for improving turbulent jet ignition performance for a passive pre-chamber. Therefore, detailed evaluations of the scavenging process and turbulent jet ignition deserve investigations for new pre-chamber schemes. In this paper, the effects of design parameters on ignition processes of plug-and-play passive pre-chamber were numerically studied, allowing for the lateral angle, orifice diameter, and vertical angle design. Seven pre-chamber schemes were evaluated, and four optimal ones were selected for bench tests. The characteristics of the scavenging process, turbulent jet ignition, and main-chamber combustion were investigated and analyzed. The results show that allowing for the trade-off between ignition energy and scavenging efficiency, the volume ratio of the pre-chamber to clearance is recommended to be 0.2~0.7%, and the corresponding area-volume ratio is 0.003~0.006 mm-1. Compared with the original natural gas engine, the pre-chamber retrofit can save up to 13.2% fuel consumption, which presents a significant improvement in fuel economy.

This paper reassesses the detrimental effect on fatigue performance due to thicker sections based on extensive fatigue strength test database, taken from research program worldwide over the past half of a century in offshore oil &amp; gas and renewable industry. The data entries in the database have been evaluated to ensure its data integrity. Statistical analyses on these S-N data are performed with or without the thickness correction at different exposure level to corrosive environment, in order to re-evaluate the suitability of current standards in regard to the thickness effect. The study has concentrated on T-joint, transverse butt welded joint and tubular joint as these are the most commonly used joint types in the offshore wind industry. The analysis indicates general agreement of fatigue strength with the thickness effects in current standard for in air conditions but great conservatism for corrosive environment.

The concept of Design Fatigue Factors (DFFs) was introduced for providing desired level of safety in structural fatigue design, often associated with damage calculated from S-N curves. Calculation of fatigue damage from S-N curves can be affected by multiple factors, e.g. types of weld class, corrosion condition, loading conditions, stress concentration on different geometries etc. Each of them can be subject to different level of uncertainties. This study intends to recalibrate the DFFs from a detailed reliability analysis by investigating the probabilistic models derived from the database of S-N curves that has been most frequently used in offshore wind industry. The results of such study indicate that the DFFs can be reduced substantially for the corrosive environmental fatigue models from current standards to the same level of target reliability.

In the field of delta-sigma modulators, reducing system power consumption without sacrificing accuracy has become a challenge. The summing circuit, as the main part of the cascade-of-integrator-in-feedforward delta-sigma modulator, consumes a significant amount of power in active summing. On the other hand, passive summing circuits have low power consumption but can cause attenuation in the summing results. This article proposes a low-power multi-bit delta-sigma modulator based on passive and attenuationless summation scheme. The summation circuit achieves multiplication of the voltage signal carried on the summation capacitor through bidirectional sampling technique, compensating for the inherent attenuation caused by passive summation, thus eliminating the need for active OTA to achieve perfect summation. A 2-order delta-sigma modulator based on 4-bit 1-order passive noise-shaping (NS) SAR quantizer is designed to verify the scheme. By combining a passive NS SAR as the 4-bit quantizer and the third-stage integrator of the system, and incorporating an energy-efficient cascode floating inverter amplifier (FIA) structure as the core active OTA, these elements have significantly enhanced the energy-efficiency of the modulator. Simulation results show that at a supply voltage of 1.2 V and a bandwidth of 20 kHz, the SNDR reaches 102.62 dB, power consumption is only 148.32 μW, and Schreier figure-of-merit (FoM) of SNDR is 183.92 dB.

With the development of educational technology, machine learning and deep learning provide technical support for traditional classroom observation assessment. However, in real classroom scenarios, the technique faces challenges such as lack of clarity of raw images, complexity of datasets, multi-target detection errors and complexity of character interactions.Based on the above problems, a student classroom behavior recognition network incorporating super-resolution and target detection is proposed. To cope with the problem of unclear original images in the classroom scenario, SRGAN (Super Resolution Generative Adversarial Network for Images) is used to improve the image resolution and thus the recognition accuracy.To address the dataset complexity and multi-targeting problems, feature extraction is optimized and multi-scale feature recognition is enhanced by introducing AKConv and LASK attention mechanisms into the Backbone module of YOLOv8s algorithm. To improve the character interaction complexity problem, the CBAM attention mechanism is integrated to enhance the recognition of important feature channels and spatial regions. Experiments show that it can detect six behaviors of students raising their hands, reading, writing, playing cell phones, looking down, and lying on the table in high-definition images. And the accuracy and robustness of this network are verified.Compared with small target detection algorithms such as Faster R-CNN, YOLOv5, and YOLOv8s, this network has better detection performance and can efficiently deal with the behavior recognition of multiple students.

Composite fiber materials are superior materials due to their high strength and light weight. Composites reflect the properties of their constituents, which is proportional to the volume fraction of each phase. There are different fiber reinforcement types and each affects it’s flexural, tensile and compression strength. When selecting a composite for a specific application, the forces excreted on the composite must be known in order to determine the reinforcement type. Unidirectional fiber reinforcement will allow very strong load resistance but only in one direction where as a random orientated fiber reinforcement can resist less load but can maintain this quota in all directions. These materials are said to be anisotropic. Certain composite fibers, taking into consideration there weights, are physically stronger than conventional metals. This research deals with the analysis of three composite materials with different reinforcement types, volume fraction and phase content. It was found that material A (glass epoxy) was the strongest in the longitudinal direction with a flexural strength of 534 MPa in the longitudinal and 420 MPa in the transverse direction. The flexural stresses of material B (glass silicone) and material C (glass polyester) where both found in the 120 to 135 MPa range. Differences were due to their differences in matrix composition and reinforcement type.

Multimodal remote sensing data classification can enhance the model’s ability to distinguish land features through multimodal data fusion. In this context, how to help models understand the relationship between multimodal data and target tasks is the focus of researchers. Inspired by human feedback learning mechanisms, causal reasoning mechanisms, and knowledge induction mechanisms, this paper integrates causal learning, reinforcement learning, and meta learning into a unified remote sensing data classification framework and proposed the causal meta-reinforcement learning (CMRL). First, based on feedback learning mechanisms, we have overcome the limitations of traditional implicit optimization of fusion features and customized a reinforcement learning environment for multimodal remote sensing data classification tasks. Through feedback interactive learning between agents and the environment, we help them understand the complex relationships between multimodal data and labels, thereby achieving full mining of multimodal complementary information. Second, based on the causal inference mechanism we designed causal distribution prediction action, classification reward, and causal intervention reward, capturing pure causal factors in multimodal data and cutting off false statistical associations between non-causal factors and class labels. Finally, based on the knowledge induction mechanism, we designed a bi-layer optimization mechanism based on meta-learning. By constructing a meta training task and meta validation task simulation model in the generalization scenario of unseen data, we helped the model induce cross-task shared knowledge, thereby improving its generalization ability for unseen multimodal data. The experimental results on multiple sets of multimodal datasets show that the proposed method achieved state-of-the-art performance in multimodal remote sensing data classification tasks.

Quasi-bound state in the continuum (QBIC) can effectively enhance the interaction of terahertz (THz) wave with matters due to the tunable high-Q property, which has a strong potential application in detection of low-concentration biological samples in the THz band. In this paper, a novel THz metamaterial sensor with a double-chain separated resonant cavity structure based on QBIC is designed and fabricated. The process of excitation of the QBIC mode is verified and the structural parameters are optimized after considering the ohmic loss by simulations. The simulated refractive index sensitivity of the sensor is up to 544 GHz/RIU, much higher than those of recently reported THz metamaterial sensors. Sensing sensitivity of the proposed metamaterial sensor is confirmed in experiment by detecting low-concentration lithium citrate (LC) and bovine serum albumin (BSA) solutions. The limits of detection (LoDs) are obtained to be 0.0025 mg/mL (12 μM) for LC and 0.03125 mg/mL (0.47 μM) for BSA, respectively, both of which excel over most of reported results in previous studies. These results indicate that the proposed THz metamaterial sensor has excellent sensing performances and can well be applied to the detection of low concentration biological samples.

A novel five-surface phosphor-in-ceramic (FS-PiC) for high illumination and excellent color uniformity in larger-scale LEDs for sensor light source application is demonstrated. YAG phosphor (Y3Al5O12:Ce3+) was uniformly mixed with ceramic and sintered at 680°C to form a phosphor wafer. A sophisticated laser engraving was employed on the phosphor wafer to form a saddle-shaped large-scale FS-PiC LEDs. The performance of the FS-PiC LEDs exhibited the illumination of 401lm, average color temperature (CCT) of 5488K±110K, and color coordinates (CIE) of (0.3179±0.003, 0.3352±0.003). In contrast to convention single-surface phosphor-in-ceramic (SS-PiC) LEDs, the performance exhibited the illumination of 380lm, average CCT of 5830K±758K, and CIE of (0.3083±0.07, 0.3172±0.07). These indicated that the performance of the FS-PiC LEDs was higher than the SS-PiC LEDs for illumination, CCT, and CIE of 1.1, 7, and 23 times, respectively. Furthermore, the FS-PiC LEDs demonstrate lower lumen loss of 2% and less chromaticity shift of 5.4x10-3 under accelerated aging at 350°C for 1008 hours, owing to the high ceramic melting temperature of up to 510°C. In this study, the proposed FS-PiC larger-scale LEDs having excellent optical performance and high reliability may be the promising candidates to replace the convention phosphor-in-organic silicone material used in high-power LEDs for the next generation of sensor light sources, display, and headlight applications.

Many engineered approaches have been proposed over the years for solving the hard problem of performing indoor localisation using smartphone sensors. However, specialising these solutions for difficult edge cases remains challenging. Here we propose an end-to-end hybrid multimodal deep neural network localisation system, MM-Loc, relying on zero hand-engineered features, learning them automatically from data instead. This is achieved by using modality-specific neural networks to extract preliminary features from each sensing modality, which are then combined by cross-modality neural structures. We show that our choice of modality-specific neural architectures is capable of estimating the location with good accuracy independently. But for better accuracy, a multimodal neural network fusing the features of early modality-specific representations is a better proposition. Our proposed MM-Loc solution is tested on cross-modality samples characterised by different sampling rates and data representation (inertial sensors, magnetic and WiFi signals), outperforming traditional approaches for location estimation. MM-Loc elegantly trains directly from data unlike conventional indoor positioning systems, which rely on human intuition.