Grafting polyethylene glycol (PEG) on polymers surface is widely used to improve biocompatibility by reducing protein and cell adhesion. Although PEG is considered to be bioinert, its incorporation to biomaterials has shown to improve cell viability depending on the amount and molecular weight (MW) used. This phenomenon was studied here by grafting PEG of three MW onto polyurethane (PU) substrata at three molar concentrations to assess their effect on PU surface properties and on the viability of osteoblasts and fibroblasts. PEG formed a covering on the substrata which increased the hydrophilicity and surface energy of PUs. Among the results it was observed that osteoblast viability increased for all MW and grafting densities of PEG employed compared with unmodified PU. However, fibroblast viability only increased at certain combinations of MW and grafting densities of PEG, suggesting an optimal level of these parameters. PEG grafting also promoted a more spread cell morphology than that exhibited by unmodified PU; nevertheless, cells became apoptotic-like as PEG MW and grafting density were increased. These effects on cells could be due to PEG affecting culture medium pH, which became more alkaline at higher MW and concentrations of PEG. Results support the hypothesis that surface energy of PU substrates can be tuned by controlling the MW and grafting density of PEG, but these parameters should be optimized to promote cell viability without inducing apoptotic-like behavior.

The current work shows the optimization in the preparation of nanosized titanium carbide (TiC) in-situ through mechanical alloying (MA). Metallic titanium (Ti) powders, along with two carbon sources, carbon nanotubes (CNTs), and stearic acid (SA), were used to reduce the particle size using a high-energy Spex800 mill. The combined use of 2 wt % of these carbon sources and n-heptane as a liquid process control agent (PCA) proved crucial in generating nanoscale powder composites through a simple and scalable synthesis process within a 4-hour timeframe. The use of 20 wt % of both carbon sources was compared to determine the ability of CNTs to form carbides and the decomposition of PCAs during mechanical milling. The result reveals structures like nanoblocks and nanolumps with and important size reduction. The structure and morphology of the composites and starting materials were evaluated through x-ray diffraction (XRD), Raman spectroscopy, scanning electron microscopy (SEM), and transmission electron microscopy (TEM).

Some of the key features of inclusive and equitable teaching approaches encourage prompt feedback, student cooperation in communities of learning, active learning, and promotes diverse ways of knowing in the classroom. In my article, I present step-bystep tips to help instructors create guided microlearning inquiry questions within an inclusive and equitable general biology classroom setting. Microlearning is a special approach that helps students complete a specific task linked to a specific learning objective that would be completed in a short time window around five minutes. The step-by-step tips presented in my article helps instructors to develop questions aligned to specific learning objective to help clarify unclear or confusing topics in general biology using the Kahoot e-Learning platform. This guided microlearning inquiry toolkit provides a blueprint for helping instructors to infuse student-centered approaches to help clarify difficult concepts in general biology and further develop avenues refine students’ critical thinking and experimental design in biology research.

1960s Europe saw a large number of residential neighborhoods built to house those migrating from the countryside. Today, more than 50 years later, these neighborhoods suffer high levels of functional, social, and technical obsolescence. In response to this, University of Seville developed the Aura Strategy as an intervention methodology to find global solutions to issues in outdated neighborhoods. To provide visibility to this aspect of the Aura strategy, the retrofit proposal presented in this article provides a solution to improve the roofing of buildings in a case study neighborhood (Polígono de San Pablo, Seville) and an analysis of the results in terms of energy and financial savings for local residents. The results show that for a population of roughly 18,000 (in 2018), net savings, including energy and retrofitting costs, ranging from nearly 6.5 to over 8.6 million can be made over the 20-year life cycle span. Likewise, the results obtained on the reduction of thermal loads indicate a 72% decrease in energy consumption, equivalent to a saving of close to 4,500 tons of greenhouse gas emissions for the district and the entire life cycle time period, with the consequent benefits on the impact on air quality and and the fight against climate change. climate change.

In this systematic review of the literature on using Machine Learning (ML) for credit risk prediction, we raise the need for financial institutions to use AI and ML to assess credit risk, analyzing large volumes of information. We posed research questions about algorithms, metrics, results, data sets, variables, and related limitations in predicting credit risk. We searched renowned databases to answer them and identified 52 relevant studies with the credit industry microfinance. Challenges and approaches in credit risk prediction using ML models we identified, difficulties with the implemented models such as the black box model, the need for explanatory artificial intelligence, the importance of selecting relevant features, addressing multicollinearity, and the problem of the imbalance in the input data. By answering the questions, we identified that the Boosted Category is the most researched family of ML models; the most commonly used metrics for evaluation are Area Under Curve (AUC), Accuracy (ACC), Recall, precision measure F1 (F1), and Precision; Research mainly uses public data sets to compare models, and private ones to generate new knowledge when applied to the real world. The most significant limitation identified is the representativeness of reality, and the variables primarily used in the microcredit industry are related data to the demographic, the operation, and payment behavior. This study aims to guide the developers of credit risk management tools and software towards the existing offer of ML methods, metrics, and techniques used to forecast it, thereby minimizing possible losses due to default and guiding risk appetite.

There are different ways to analyse energy absorbance (EA) in the human auditory system. In previous research, we developed a complete finite element model (FEM) of the human auditory system. In this mentioned work, the external auditory canal (EAC), middle ear, and inner ear (spiral cochlea, vestibule, and semi-circular canals) were modelled based on human temporal bone histological sections. Multiple acoustic, structure and fluid-coupled analyses were conducted using the FEM to perform harmonic analyses in the 0.1–10 kHz range. Once the FEM had been validated with published experimental data, the FEM numerical results were used to calculate the EA or energy reflected (ER) by the tympanic membrane. This EA was also measured in clinical audiology tests which were used as a diagnostic parameter. A mathematical approach was developed to calculate the EA and ER, with numerical and experimental results showing adequate correlation up to 1 kHz. Another published FEM had adapted its boundary conditions to replicate experimental results. Here, we recalculated those numerical results by applying the natural boundary conditions of human hearing and found that the results almost totally agreed with our FEM. This boundary problem is frequent and problematic in experimental hearing test protocols: the more invasive they are, the more the results are affected. One of the main objectives of using FEMs is to explore how the experimental test conditions influence the results. Further work will still be required to uncover the relationship between the middle ear structure and EA to clarify how to best use FEMs. Moreover, the FEM boundary conditions must be more representative in future work to ensure their adequate interpretation.

This study examined infants' neural responses to emotional prosody in natural speech. A multi-feature oddball paradigm was used with 34 3~11 month-old infants. Results showed distinct early (100-200 ms) and late (300-500 ms) mismatch responses to different emotional prosodies. Older infants had more negative early responses with happy and angry prosodies evoking stronger responses compared to sad prosody while younger infants showed a clearer distinction between angry and sad prosodies. In the late time window, angry prosody elicited more negative responses than sad prosody with younger infants showing more distinct responses between these two prosodies. Males exhibited stronger early mismatch responses than females. These findings call for further research on the implications for socio-emotional and language development.

Purpose: Emotional voice conveys important social cues that demand listeners’ attention and timely processing. This event-related potential study investigated the feasibility of a multi-feature oddball paradigm to examine adult listeners’ neural responses to detecting emotional prosody changes in non-repeating naturally spoken words. Method: Thirty-three adult listeners completed the experiment by passively listening to the words in neutral and three alternating emotions while watching a silent movie. Previous research documented pre-attentive change-detection electrophysiological responses (e.g., MMN, P3a) to emotions carried by fixed syllables or words. Given that the MMN and P3a have also been shown to reflect extraction of abstract regularities over repetitive acoustic patterns, the current study employed a multi-feature oddball paradigm to compare listeners’ MMN and P3a to emotional prosody change from neutral to angry, happy, and sad emotions delivered with hundreds of non-repeating words in a single recording session. Results: Both MMN and P3a were successfully elicited by the emotional prosodic change over the varying linguistic context. Angry prosody elicited the strongest MMN compared to happy and sad prosodies. Happy prosody elicited the strongest P3a in the centro-frontal electrodes, and angry prosody elicited the smallest P3a. Conclusions: The results demonstrated that listeners were able to extract the acoustic patterns for each emotional prosody category over constantly changing spoken words. The findings confirm the feasibility of the multi-feature oddball paradigm in investigating emotional speech processing beyond simple acoustic change detection, which may potentially be applied to pediatric and clinical populations.

Concrete consumption greatly exceeds the use of any other material in engineering. This is due to its good properties as construction material and the availability of its components. Nevertheless, the present worldwide construction increase and the high-energy consumption for cement production means a high environmental impact. On the other hand, one of the main problem in iron and steel industry is waste generation and by-products that must be properly processed or reused to promote the environmental sustainability. One of these by-products are blast furnace slag. Cement substitution by slag strategy achieves two goals, raw materials consumption reduction and waste management. In the present work, four different concrete mixtures are evaluated. 25% cement is substituted by different blast furnace slag. Tests are made to evaluate the advantages and drawbacks of each mixture. Depending on the origin, characteristics and treatment of the slag, concrete properties change. Certain mixtures provide proper concrete properties. Stainless steel slag produces a fluent mortar that reduces the water consumption whit a slight mechanical strength loss. Mixture with electric arc slag furnace properties are better to the reference concrete (without slag) when slag is treated similarly to the cement.

A microwave assisted method for synthesis of 2-substituted benzimidazoles has been developed. The combination of molar ratio N-phenyl-o-phenylenediamine:benzaldehyde (1:1) using microwave irradiation and only 1% mol of Er(OTf)3 provide an efficient, environmental and mild access to a diversity of benzimidazoles under solvent-free conditions.

This study explores the implementation of an interdisciplinary curriculum in product and media design education and its impact on knowledge innovation and competency development. The curriculum is based on scaffolding theory, incorporating design proposals, workshops, digital design, marketing tests, and marketing activities guided by teachers and mentors from a branded ceramic workshop. The research findings demonstrate that the interdisciplinary curriculum facilitates knowledge innovation and fosters the development of students' professional skills, creativity, and problem-solving skills. The study also highlights the importance of stable scaffolding, including artefact, peer, and teacher support, which significantly contributes to cultivating transformational competencies, as outlined in the 2030 OECD Learning Compass. Additionally, the collaboration with Shanshing Four Seasons Celadon Studio on a patented ceramic product, "Funny Monkey," is a tangible example of the journey towards a triple-helix knowledge economy. This research underscores the importance of interdisciplinary curricula in promoting knowledge innovation and integrating transformational competencies in education. Scaffolding theory provides practical guidance for student learning and teaching strategies, presenting a sustainable roadmap for developing interdisciplinary curricula and offering a concrete and transferable pedagogical prototype for educational innovation.

Zebrafish have been found to be the premier model organism in biological and biomedical research, specifically offering many advantages in developmental biology and genetics. This unique aquatic species has been found to have the capacity to regenerate their spinal cord after injury. However, the complete molecular and cellular mechanisms behind glial bridge formation in the central and peripheral nervous systems upon glial cell injury remains unclear. This review paper focuses on the molecular mechanisms and cellular processes that underlie spinal cord regeneration in four initial phases: proliferation and initial migration; migration and differentiation; glial bridge formation; and remodeling. We propose that within these four phases the cellular mechanisms that underlie spinal cord regeneration each express a terminating signal that aborts one step of the process and initiates the next. Specifically, future studies would be devoted to investigate transmitting signals in the spinal cord injury micro-environment in hope to contribute to the understanding of underlying cellular mechanisms by connecting each process of spinal cord regeneration in zebrafish.

In commercial terms, Virgin Olive Oil (VOO) is considered an exceptional food of excellent sensory and nutritional quality, for its taste and genuine odour and, as well as for its bioactive compounds, of a great interest for the health. This quality can be affected by oxidative degradation, chemical as well as enzymatic (activity of oxidative endogenous enzymes from polyphenol oxidase and peroxidase olive fruit type), of essential components during extraction and conservation of VOO. In the bibliography, the reduction of oxygen during the malaxation process and the storage of the oil has been studied in different ways. However, research about the reduction of oxygen in the crushing of olive fruit, malaxation of the paste and/or both at the same time in “real extraction condition” is scarce. The reduction of oxygen has been compared to control conditions (concentration of atmospheric oxygen of 21%). Batches of 200 kg of olive fruit, Picual cultivar, were used and the following treatments were applied: Control (21% O2 Mill - 21% O2 Mixer), “IM-NM”: Inerted milling -Normal malaxation (6.5% O2 Mill-21% O2 Mixer), “NM-IM”: Normal milling-Inerted malaxation (21% O2 Mill-4 % O2 Mixer) and “IM-IM”: Inerted milling-Inerted malaxation (5.5% O2 Mill-10% O2 Mixer). The parameters of commercial quality covered by Regulation: free acidity, peroxide value and absorbency in ultra-violet (k 232 and k270) did not suffer any change in relationship to the control, the oils belong to the comercial category of “Extra virgin olive oil”. The phenolic compounds are involved in the distinctive bitter and purgent taste and, their healthy properties and their oxidative stability, increased with the downsizing amounts of oxygen regarding control and the IM-NM, NM-IM and IM-IM treatments with an average of 4, 10 and 20 %, respectively. By contrast, total volatile compounds decrease between a 10-20 % in all oxygen reduction treatments. The volatile compounds arising from lipoxygenase pathway, which are responsable for the green and fruity notes of VOO, also decreased their concentration with the treatments, between 15-20%. The results show how the reduction of oxygen in the milling and malaxation stages of olive fruit can modulate the content of phenols, volatile compounds, carotenoids and chlorophyll pigments of the VOO avoiding the degradation of compound with sensorial and nutritional interest.

The effect of embryo reinsertion immediately after embryo flushing was studied to determine its effect on luteal function, pregnancy outcome, endometrial bacterial contamination, and embryo morphology. In Experiment 1, eight mares were used during 32 cycles (8 cycles in each group): for the first two groups, inseminated mares were flushed 8 days after ovulation and prostaglandin F2α was not administered: in group EF-ET (embryo flushing and embryo transfer) the embryo was reinserted in the same donor mare, while in the EF group, no further procedure was performed. In the third group (ET), non-inseminated mares (recipients) received a Day 8 embryo 5 to 8 days after ovulation. Progesterone concentration was measured before EF/ET and 72 h after in the 3 groups. Pregnancy diagnosis was performed within 6 days of transfer. In Experiment 2, twelve mares were used during 17 cycles in two groups: EF-ET (n=11) and ET (n=6), as in Experiment 1, except that every mare was flushed 24 h after embryo transfer to retrieve the embryo. Fewer pregnancies resulted after transfer in EF-ET cycles (0(8, 0%) than in the ET group (6/8, 75%). Progesterone concentration decreased significantly (p=0.05) 72 h after EF-ET, but not in EF or ET cycles (p>0.1). Three mares from the EF-ET showed full luteolysis and signs of endometritis. In Experiment 2, more (5/6; p=0.08) grade I embryos were recovered in the ET compared to the EF-ET group (3/7); 4 embryos were graded III-IV (were broken or had signs of degeneration) in the EF-ET group, but none in the ET group. In both groups, capsule fragments were obtained as indicative of the presence of a recently destroyed embryo in the EF-ET (n=3) and ET (n=1) groups. Positive bacterial cultures were obtained in 2/11 and 1/6 embryo flushes from the EF-ET and ET groups, respectively.

Abstract: Bariatric surgery is increasingly used in women of childbearing age due to the rising prevalence of obesity and the effectiveness and availability of this treatment. Pregnancy in women with previous bariatric surgery deserves special attention. Weight loss induced by surgery re-duces the risks that obesity poses for pregnancy. But on the other hand, decreased intake and malabsorption may increase the risk of malnutrition and micronutrient deficiency and negatively affect maternal and foetal health. The aim of this narrative review is to provide an updated anal-ysis on the impact of different bariatric surgery techniques on minerals and micronutrients status nutritional status during pregnancy and the possible effect on maternal-foetal health.

In this study, different configurations based on linear fiber lasers were proposed and experimentally demonstrated to measure the concentration of paracetamol liquid solutions in a range of 52.61 to 201.33 g/kg. The optical gain was provided by a commercial bidirectional Erbium-Doped Fiber Amplifier (EDFA) and the linear cavity was obtained using two commercial Fiber Bragg Gratings (FBGs). The main difference of each configuration was the coupling ratio of the optical coupler used to extract the system signal. The sensing head corresponded to a Single-Mode Fiber (SMF) tip that worked as an intensity sensor. The results reveal that, despite the optical coupler used (50:50, 60:40, 70:30 or 80:20), all the configurations reached the laser condition, however, the concentration sensing was only possible using a laser drive current near to the threshold value. The configurations using a 70:30 and an 80:20 optical coupler allowed to perform paracetamol concentration measurements with a higher sensitivity of (-3.00±0.24) pW/(g/kg). In terms of resolution, the highest value obtained was 1.75 g/kg, when it was extracted 20% of the output power to the linear cavity fiber laser configuration.

Vanilla pompona is the third most important commercial species of the genus Vanilla, but its morphometric variation is little known. In orchids, infraspecific variation is expressed in the labellum. This study had the objective of analyzing the floral variation of V. pompona collections from localities in Veracruz, Puebla, Jalisco and Oaxaca, Mexico. During the flowering period, we obtained 55 collections of V. pompona flowers, and in the dissected labellum of each flower 54 lines and 7 angles were measured and portrayed with the ImageJ program. With the data obtained, we performed an analysis of variance, a principal components analysis, and a cluster analysis. The results showed significant differences among the collections and localities in the means of the lines of the basal, middle, and apical regions of the labellum. Also, six morphotypes were obtained, and we found that variation was associated with factors such as the environment, geographic barriers, and pollinator pressure. Moreover, we observed variation in flowering dates in one locality of Veracruz. We concluded that there is infraspecific variation within and between the collection localities of V pompona of the Atlantic region (Puebla and Veracruz) and the Pacific region (Jalisco and Oaxaca), Mexico.

The fact that real dissipative (entropy producing) processes may be detected by non–comoving observers (tilted), in systems that appear to be isentropic for comoving observers, in general relativity, is explained in terms of the information theory, in analogy with the explanation of the Maxwell's demon paradox.

The generation of different types of defective viral genomes (DVG) is an unavoidable consequence of the error-prone replication of RNA viruses. In recent years, a particular class of DVGs, those containing long deletions or genome rearrangements, has gain interest due to their potential therapeutic and biotechnological applications. Identifying such DVGs in high-throughput sequencing data has become an interesting computational problem. Up to nowadays, several algorithms have been proposed, though all incur in false positives, a problem of practical interest if such DVGs have to be synthetized and tested in the laboratory. Here we develop a novel software, DVGfinder, that wraps the two most commonly used algorithms into a pipeline that predicts DVGs. Using a gradient boosting classifier machine learning algorithm, we evaluate the performance of DVGfinder compared to previous algorithms and found that it outcompetes their precision and sensitivity in simulated datasets. DVGfinder generates user-friendly output files in HTML format that can assist users to identify DVGs based on their associated probability of being true positives.

The influence and importance of research and development (R&D) for business sustainability have gained increasing interests, especially in the high-tech sector. However, the efforts of R&D might cause complex and mixed impacts on the financial results considering the associated expenses. Thus, this study aims to examine how R&D efforts may influence business to improve its financial performance considering the dual objectives: the gross and the net profitability. This research integrated a rough-set-based soft computing technique and multiple criteria decision-making (MCDM) methods to explore this complex and yet valuable issue. A group of public listed companies from Taiwan, all in the semiconductor sector, was analyzed as a case study. Initially, more than 30 variables were considered, and the adopted soft computing technique retrieved 14 core attributes—for the dual profitability objectives—to form the evaluation model. The importance of R&D for pursuing superior financial prospects is confirmed, and the empirical case demonstrates how to guide an individual company to plan for improvements to achieve its long-term sustainability by this hybrid approach.

The broad bean plant contains L-DOPA, a compound that is essential for patients with Parkin-son’s disease. However, little has been reported on other broad bean compounds that have bene-ficial effects on health. The objective was to evaluate plants of four Mexican broad bean varieties to determine the content and yield of total phenolic compounds (TPC), total flavonoids (TF), and L-DOPA, as well as to analyze the flavonoid profile and antioxidant (AA) and anti-inflammatory (AANTI) activity in vitro. Broad bean seeds were sown in the field and plants were harvested 20 days after emergence. The analyses were performed with visible UV spectrophotometry and HPLC. The variety José María produced the highest yield of TPC (9.30 g m-2), TF (8.08 g m-2) and L-DOPA (5.64 g m-2) per unit of area. The highest yields per plant were obtained with the Rojita variety: TPC (0.25 g plant-1), TF (0.21 g plant-1) and L-DOPA (0.17 g plant-1). This variety also had the highest antioxidant (CI50= 87.68 µg mL-¹) and anti-inflammatory (CI50= 74.40 mg mL-1) activi-ty, which was attributed to the L-DOPA compounds and to rutin and isoorientins, respectively. The flavonoid profile revealed the presence of rutin and isoorientins, which had not been previ-ously detected in the broad bean plant.

Single-Anastomosis Duodeno-Ileal bypass with Sleeve Gastrectomy (SADI-S) is a modification of the duodenal switch in which only one anastomosis is performed, with a longer common limb and an expected less malabsorptive effect. The present study analyzes presentation and treatment of malnutrition after SADI-S. 258 consecutive patients undergoing SADI-S between May 2007 and September 2017 were included. The common limb length was 200 cm in 50 cases, 250 cm in 156 and 300 in 52. 30 patients were admitted for severe hypoalbuminemia and 16 patients were submitted to revisional surgery and constitute the series of our study. Mean weight before reoperation was 57 kg and mean body mass index (BMI) was 21 kg/m2. Mean number of daily bowel movements was 5,6. Mean time to reoperation was 56 months. Revisional surgery consisted mainly in elongation of the common limb. Mean weight regain was 14 kg and mean final BMI was 26 kg/m2. Daily bowel movements were decreased to 1,3. Factors related to hypoalbuminemia were hypertension, poor controlled diabetes, age over 55 years and a shorter common limb. Although SADI-S is expected to be less malabsorptive than previous biliopancreatic diversions, caution has to be taken with selected patients to avoid postoperative malnutrition.

(1) Background: Elite sport can increase vulnerability to developing mental health pathologies. The purpose of the study is to determine the frequency at which these behavioural disorders appear in elite footballers and evaluate their relationship with other addictions. (2) Methods: A cross-sectional study was conducted between November 2020 and January 2022 on 306 participants. The variables of gambling and gaming were studied. The different groups were compared using Chi-squared tests. Probabilities exceeding 95% (p-values < 0.05) and residuals results greater than 2 or less than −2 were considered significant. (3) Results: There were significant differences between the two groups in terms of alcohol (p < 0.001), tobacco (p < 0.001), and cannabis (p < 0.018) consumption. We also found differences between those who had a history of a nervous disease (p < 0.015). 6.6% of the of football players had a probable diagnosis of gambling disorder compared to 1% in the general population (p < 0.007). Among the pathological and non-pathological cases of gambling in the football population, significant differences were found between those with a salary of €900–1,500/month (p < 0.033) or a history of a nervous pathology (p < 0.001). (4) Conclusions: This study showed that professional football players were vulnerable to mental health pathologies related to gaming.

Easter Island (Rapa Nui) deforestation has traditionally been viewed as a single event, synchronous in time and space across the island and caused by Polynesian settlers. However, recent studies have challenged this idea introducing the concept of spatio-temporal heterogeneity and suggesting a role for climate change. This paper presents a continuous paleovegetation record of the last millennium (~960 to ~1710 CE), based on palynological analysis of a peat core from Lake Kao. During this time interval, deforestation was gradual, with three main pulses at ~1070 CE, ~1410 CE and ~1600 CE, likely driven by drought, anthropogenic practices (mostly fire) or the coupling of both. Some forest regeneration trends have been documented after the first and the second deforestation pulses. Forests were totally removed by 1600 CE, coinciding with the full permanent human settlement of the Kao area. Comparison with other continuous palynological records available for the last millennium (Aroi marsh and Lake Raraku), confirms that forest clearing was heterogeneous in time and space, rather than synchronous island-wide.

Background: Few studies have investigated the longitudinal association between cervical spondylosis (CS) and migraine by using a nationwide population-based database. Methods: We conducted a retrospective cohort study from 2000 to 2011 identifying 27,930 cases of cervical spondylosis and 111,720 control subjects (those without cervical spondylosis) from a single database. The subjects were frequency-matched on the basis of sex, age, and diagnosis date. The non- cervical spondylosis cohort was four times the size of the cervical spondylosis cohort. To quantify the effects of cervical spondylosis on the risk of migraine, univariate and multivariate Cox proportional hazard regression analyses were used to calculate the hazard ratio (HR) and 95% confidence interval (CI). Results: After a 10-year follow-up controlling for potential confounding factors, overall migraine incidence was higher in the cervical spondylosis cohort than in the non- cervical spondylosis cohort (5.16 and 2.09 per 1,000 people per year, respectively; crude hazard ratio = 2.48, 95% confidence interval = 2.28–2.69) with an adjusted hazard ratio of 2.03 (95% confidence interval = 1.86–2.22) after accounting for sex, age, comorbidities, and medication. Individuals with myelopathy in the cervical spondylosis cohort had a 2.19 times (95% confidence interval = 1.80–2.66) higher incidence of migraine compared than did those in the non- cervical spondylosis cohort. Conclusion: Individuals with cervical spondylosis exhibited a higher risk of migraine than those without cervical spondylosis. The migraine incidence rate was even higher among individuals with cervical spondylotic myelopathy.

Rainfall retrieval using geostationary satellites provides critical means to the monitoring of extreme rainfall events. Using the relatively new Himawari 8 meteorological satellite with three times more channels than its predecessors, the deep learning framework of “convolutional autoencoder” (CAE) was applied to the extraction of cloud and precipitation features. The CAE method was incorporated into the Convolution Neural Network version of the PERSIANN precipitation retrieval that uses GOES satellites. By applying the CAE technique with the addition of Residual Blocks and other modifications of deep learning architecture, the presented derivation of PERSIANN operated at the Central Weather Bureau of Taiwan (referred to as PERSIANN-CWB) expands four extra convolution layers to fully use Himawari 8’s infrared and water vapor channels, while preventing degradation of accuracy caused by the deeper network. The development of PERSIANN-CWB was trained over Taiwan for its diverse weather systems and localized rainfall features, and the evaluation reveals an overall improvement from its CNN counterpart and superior performance over all other rainfall retrievals analyzed. Limitation of this model was found in the derivation of typhoon rainfall, an area requiring further research.

In the clock network design, the trade-off between power consumption and timing closure is an important and difficult issue. To achieve this target, a hybrid clock network architecture that combines both clock tree and clock mesh seems to be a promising solution. In this paper, we propose a novel clock mesh architecture – cross-mesh, with the average dispersion of the overall driving force, our methodology creates small non-zero skew clock trees. In addition, we integrate clock gating and register clustering techniques to further reduce dynamic power consumption. The proposed algorithms have four stages: cross-mesh planning, register clustering, mesh line connecting, and load balancing. Experimental results show that our methodology and algorithms get feasible solution effectively and improve both power consumption and clock skew simultaneously.

While the importance of corporate governance has been broadly acknowledged in global financial markets and academic research, how to devise a practical evaluation system is relatively unexplored. This paper attempts to refine the Corporate Governance Evaluation System (CGES), constructed by the Taiwan Stock Exchange (TWSE) since 2014. The current CGES has several debatable issues in its complicated design (e.g., it comprises over 80 indicators in different types). To resolve those issues, this study invited ten senior domain experts (including several CEOs of financial holding companies) to retrieve 13 essential criteria from the CGES in four dimensions. And this study integrates several multiple criteria decision-making (MCDM) methods (i.e., Decision-making trial and evaluation laboratory (DEMATEL), modified VIKOR, DEMATEL-based analytical network process (DANP)) and the fuzzy evaluation technique to rank the exemplary companies. The obtained ranking is consistent with the one released from the CGES in 2017. This study conducted additional experiments to ensure the robustness of the findings. The newly devised model not only supports the ranking decisions but also provides a managerial guidance for companies to pursue systematic improvements. These findings enrich the understanding of corporate governance and contribute to gaining business sustainability for financial holding companies.

Despite chronic fibrosis and associated excess extracellular matrix (ECM) deposition and crosslinking occurring in many pathological conditions, few in vitro studies examine how fibrosis-induced ECM stiffening impacts lymphatic endothelial cells (LEC) behavior and subsequent new lymphatic vessel growth and function. This study examined the stiffening profile of PhotoCol®—commercially available methacrylated type I collagen—photo-crosslinked with photoinitiators Lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP), Irgacure 2959 (IRG), and Ruthenium/Sodium Persulfate (Ru/SPS) prior to evaluating PhotoCol® permeability and LEC response to PhotoCol® at low and high stiffness levels representing normal and fibrotic ECM stiffness. Ru/SPS produced the highest maximum stiffness for photo-crosslinked PhotoCol® hydrogels. While Ru/SPS stiffness values did not differ significantly with increased light exposure, permeability decreased significantly with increasing light exposure for 40 kDa dextran. Finally, LECs on softer PhotoCol® appeared smaller with less prominent VE-Cadherin (cell-cell junction) and F-actin expression compared to cells on stiffer PhotoCol®. Overall, PhotoCol® with Ru/SPS photoinitiator provides the fibrillar microstructure and dynamic stiffness range that enables systematic study of LEC stiffness responses relevant to the stiffened ECM observed in pathologies with significant fibrotic activity. Therefore, this study demonstrates the utility of PhotoCol® with Ru/SPS for disease modeling applications, particularly modeling lymphatic vascular growth and function during fibrosis.

Patients with Multiple Myeloma have an increased susceptibility to severe infections due to several various factors, especially the high tumor burden. The use of the anti-CD38 monoclonal antibodies-based therapies has changed the frequency and epidemiology of infections. We report herein the safety profile of the pivotal clinical trials conducted with anti-CD38 mAbs (daratumumab and isatuximab) and anti-SLAMF7 mAbs (elotuzumab) that led to the approval of regimens employed today in NDMM and RRMM patients.

The cornea is an avascular tissue which has attracted much attention by the uniqueness of its anatomical characteristics, it has, in proportion, an enormous size, in relation to the number of vessels, because on average few cells in the organism are away more than 30 microns of a blood vessel. However, the cornea, with a diameter of between 11 and 12 mm, is a unique example. It has been tried to explain the notable absence of blood vessels in the cornea, arguing that corneal tissues are able to take oxygen directly from the air. In this article we are explaining that based on the physicochemical characteristics of molecular oxygen and the cell membrane, cytoplasm, water, and cellular metabolism, it is not possible that epithelial corneal cells directly take oxygen from the air, instead, corneal cells have molecules that can dissociate the water molecules thereby these cells, like any other eukaryotic cells, take the oxygen from the intracell water, like plants.

Patients receiving hemodialysis are at risk of vascular access infections (VAIs) and particularly vulnerable to the opportunistic pathogen Staphylococcus aureus. Hemodialysis patients were also at increased risk of infection during the COVID-19 pandemic. Therefore, this study determined the change in the molecular and antibiotic resistance profiles of S. aureus isolates from VAIs during the pandemic compared with before. 102 S. aureus isolates were collected from VAIs between November 2013 and December 2021. Before the pandemic, 69 isolates were collected, 58%, 39.1%, and 2.9% from arteriovenous grafts (AVGs), tunneled cuffed catheters (TCCs), and arteriovenous fistulas (AVFs), respectively. The prevalence of AVG and TCC isolates changed to 39.4% and 60.6%, respectively, of 33 isolates during the pandemic. Sequence type (ST)59 was the predominant clone in TCC-methicillin-resistant S. aureus (MRSA) and AVG-MRSA before the pandemic, whereas the predominant clone was ST8 in AVG-MRSA during the pandemic. ST59 carrying the ermB gene was resistant to clindamycin and erythromycin. By contrast, ST8 carrying the msrA gene was exclusively resistant to erythromycin. The ST distribution for different VAIs changed from before to during the pandemic. The change in antibiotic resistance rate for different VAIs was closely related to the distribution of specific STs.

This article presents, for the first time, the efficacy and curing depth analysis of photo-thermal dual polymerization in metal (Fe) polymer composites for 3D printing of a 3-component (A/B/M) system based on the proposed mechanism of our group, in which the co initiators A and B are Irgacure-369, and charge-transfer complexes (CTC), respectively; and the monomer M is filled by Fe. Our formulas show the depth of curing (Zc) is an increasing function of the light intensity, but a decreasing function of the Fe and photoinitiator concentrations. Zc is enhanced by the additive [B] which produces extra thermal radical for polymerization under high temperature. The heat (or temperature) increase in the system has two components : (i) due to the light absorption of Fe filler, and (ii) heat released from the exothermic photopolymerization of the monomer. The heat is transported to the additive (or co-initiator) [B] to produce extra radical R' and enhance the monomer conversion function (CF). The Fe filler leads to temperature increase, but also limits the light penetration leading to lower CF and Zc, which could be overcome by the additive initiator [B] in thick polymers. Optimal Fe for maximal CF and Zc are explored theoretically.

The exploitation and use of alternative synthetic methods, in the face of classical procedures that do not conform to the ethics of Green Chemistry, represent an ever present problem in pharmaceutical industry. The procedures for the synthesis of benzimidazoles have become a focus in synthetic organic chemistry, as they are building blocks of strong interest for the development of compounds with pharmacological activity. Various benzimidazole derivatives exhibit important activities such as antimicrobial, antiviral, anti-inflammatory and analgesic and some of the already synthesized compounds have found very strong application in medicine praxis. Here we report a selective and sustainable method for the synthesis of 1,2-disubstituted or 2-substituted benzimidazoles, starting from o-phenylenediamine in the presence of different aldehydes. The use of deep eutectic solvent (DES) both as reaction medium and reagent without any external solvent provides advantages in terms of yields as well as in the work up procedure of the reaction.

The study was carried out in zone 7 of Ecuador, in ecosystems of the Southern Montane Evergreen Forest of the Eastern Cordillera of the Andes that goes from 2200 to 3000 masl. In the Evergreen Seasonal Lower Montane Forest of Catamayo-Alamor, which ranges from 1600-2000 meters above sea level and finally in the Semideciduous Foot Montane Forest of Catamayo-Alamor, which ranges from 400-1600 meters above sea level. The objective was to know the occurrence, structure and abundance of J. neotropica. The investigation consisted of collecting secondary information on the occurrence of the species, to later verify it in situ. Six sites with areas ≥ 0.5 hectares were identified, four in the province of Loja and two in the province of Zamora Chinchipe. Regarding the structure, it was determined that there are significant statistical differences as well as in the dasometric variables between one site and another, presenting better growths El Tundo with average values in DAP(cm)= 45.16; G(m2) = 1.41; HT(m)= 19.22; HC(m)= 13; VC(m3) = 3.55; VT(m3) = 5.22. Regarding the Morisita index, the species presents adistribution pattern >1. Regarding abundance, it was determined that Algeria presented a maximum of 297 (ind/ha), and La Victoria 46 (ind/ha) with a minimum.

Climacteric fruits undergo a characteristic ripening process regulated by ethylene, a key plant hormone. Extending the shelf life of these fruits while preserving their postharvest quality poses a significant challenge for the food industry. This review provides a comprehensive overview of physiological and molecular strategies to delay ethylene-mediated ripening in climacteric fruits and their impact on shelf life, postharvest quality, sensory attributes, and volatile compounds. Additionally, it examines the role of ethylene in fruit ripening analysing various ethylene managing strategies including ethylene inhibitors, ethylene adsorbents and ethylene scavengers by catalytic oxidation The review concludes with future research directions including integrated strategies, environmental considerations and commercial applications for improving postharvest handling and fruit quality.

This study investigated the presence and characteristics of Juglans neotropica in three ecosystems in Southern Ecuador: Montane Evergreen Forest, Evergreen Seasonal Lower Montane Forest, and Semideciduous Foot Montane Forest. The main focus was on the species' multipurpose nature as both a fruit and timber source. Six study sites, totaling at least 0.5 hectares each, were established, with four in Loja province and two in Zamora Chinchipe province.The results showed significant differences in dendrometric variables across the sites, with the most favorable growth recorded in The Tundo, where trees exhibited an average diameter at breast height (DBH) of 45.16 cm, basal area (G) of 1.41 m2, total height (TH) of 19.22 m, canopy height (CH) of 13 m, cubic volume (CV) of 3.55 m3, and total volume (TV) of 5.22 m3. The species displayed a clumped distribution pattern, as indicated by a Morisita index greater than 1. Regarding abundance, the highest density of 297 trees per hectare was found in Argelia, while Victoria had the lowest density of 46 trees per hectare. This research highlights the importance of Juglans neotropica as a multipurpose species, providing both valuable fruits and wood resources in the studied ecosystems of Southern Ecuador.

In this research, the photocatalytic degradation of cypermethrin using Fe-TiO2 nanoparticles supported in a biomaterial was evaluated. The nanoparticles of TiO2 were synthesized by the green chemistry method assisted by ultrasound and doped by chemical impregnation using molar ratios Fe:Ti of 0, 0.05, 0.075 and 0.1, to make efficient use of direct sunlight (λ>310 nm). All nanoparticles were immobilized on the surface of spathe of coconut palm (Cocos nucifera). The degradation was carried out at room temperature and natural pH in a flat plate solar reactor, on which the composite material was subjected. The concentration of cypermethrin was determined after 12000 J/m2 of accumulated radiation from GC-MS and the resulting material was characterized by Scanning electron microscopy (SEM), Transmission electron microscopy (TEM) image and selected area electron diffraction (SAED), Fourier transform infrared spectroscopy (FTIR), UV-Vis spectrophotometry of diffuse reflectance and BET surface area BET surface area. The best results were achieved with the use of Degussa TiO2 P-25, Fe:Ti=0 and Fe:Ti=0.05 in suspension, with percentages of degradation of cypermethrin of 99.84, 99.62, and 100%, respectively. However, the materials supported on the biomaterial of coconut, they allowed to reach degradation percentages higher than 80% with the advantage that it minimizes operating costs, since they are not necessary filtering or centrifuging processes to separate the catalyst.

Resilience has emerged as a buzzword among researchers and practitioners. However, despite its popularity, there has been little progress in moving it from an elaborate metaphor describing an idyllic state of the system to a tool for planning and managing adaptation. While case study research is rich with examples of systems that have proven to be resilient or are striving to develop resilience, there is no defined approach that operationalises concepts described in the literature into the planning process. This paper helps close this gap by illustrating how facilitated modelling can be used for resilience planning in socio-ecological systems. The paper summarizes our experience using facilitated system dynamics to inform a model-based discussion of food security resilience to climate change in Guatemala. We identify at least three positive outcomes from the intervention, which a) helped to build consensus about the meaning of resilience, b) improved stakeholders understanding of adaptation and c) outlined potential policies to enhance resilience.

Nanocrystalline silicon oxide (nc-SiOx:H) is a multipurpose material with its varied application in solar cells as a transparent front contact, intermediate reflector, back reflector layer and even tunnel layer for passivating contacts, owing to easy tailoring of its optical properties. In this work, we systematically investigate the influence of gas mixture (SiH4, CO2, PH3 and H2), RF power and process pressure on the optical, structural and passivation properties of thin n-type nc-SiOx:H films prepared in an industrial, high throughput, plasma-enhanced chemical vapor deposition (PECVD) reactor. We provide a detailed description of the n-type nc-SiOx:H material develop-ment using various characterization techniques (SEM, EDX, Raman spectroscopy, and spectro-scopic ellipsometry) with a focus on the relationship between the material properties and the pas-sivation they provide to n-type c-Si wafers characterized by their effective carrier lifetime (τeff). Further, we also outline the parameters to be kept in mind while developing different n-type nc-SiOx:H layers for different solar cell applications. We report a tunable optical gap (1.8 – 2.3 eV) for our n-type nc-SiOx:H films as well as excellent passivation properties with τeff up to 3.5 ms (iVoc ~ 715 mV) before annealing. Oxygen content plays an important role in determining the crystallinity and hence passivation quality of the deposited nanocrystalline silicon oxide films.

A two scalar field model that incorporates non Riemannian Measures of integration or usually called Two Measures Theory (TMT) is introduced, in order to unify the early and present universe. In the Einstein frame, a K-essence is generated and as a consequence for the early universe, we can have an Inflation for the very early universe and then, after inflation, an early dark energy period and a late dark energy period for the present universe dark, both dark energy epochs have a consistent generation of dark energy (DE), dark matter (DM) and stiff matter. This is obtained when the scale invariance is introduced and then is spontaneously broken from the integration of the degrees of freedom associated with the modified measures. The resulting effective potentials and K-essence in the Einstein frame produce the three flat regions corresponding to the different epochs mentioned before. For the first flat region, we can associate an inflationary universe. Also assuming this first plateau, we study the inflation in the framework of the slow-roll approximation. In this scenario under the slow roll approximation, we obtain a linear combination that is a constant. The corresponding cosmological perturbations in our model are determined and we also obtain the different constraints on the parameter-space from the Planck data. The slow roll approximation can be arranged so that the transition from inflation to the next flat region can be achieved without problems. In the following two flat regions, in addition to the inflation phase, representing the Early Dark Energy and Late Dark Energy Periods, with DE and also the DM, do not need to be introduced separately, they are instead a result of a K-essence induced by the multi measures, multi field theory. Therefore the scalars generate both the DE and the DM . Also a stiff matter component is automatically generated from the K-essence theory from two scalar fields. From the perturbative analysis associated to the perturbation solution of background, we find a correlation between the two scalars. Besides, we obtain that our model during the dark epoch has a behaviour of tracking freezing mode

Confinement can induce substantial changes in the physical properties of macromolecules in suspension. Soft confinement is a particular class of restriction where the boundaries that constraint the particles in a region of the space are not well-defined. This scenario leads to a broader structural and dynamical behavior than the observed in systems enclosed between rigid walls. In this contribution, we study the ordering and diffusive properties of a two-dimensional colloidal model system subjected to a one-dimensional parabolic trap. Increasing the trap strength makes it possible to go through weak to strong confinement, allowing a dimensional transition from two- to one-dimension. The non-monotonic response of the static and dynamical properties to the gradual dimensionality change affects the system phase behavior. We find that the particle dynamics is connected with the structural transitions induced by the parabolic trap. In particular, at low and intermediate confinement regimes, complex structural and dynamical scenarios arise, where the softness of the external potential induces melting and freezing, resulting in faster and slower particle diffusion, respectively. Besides, at strong confinements, colloids move basically along one direction, and the whole system behaves structurally and dynamically similar to a one-dimensional colloidal system.

Adolescence is a stage of change and transition, which together with the COVID-19 situation, has been a huge source of vulnerability and facilitated the development of emotional disorders. This study aims to analyse internalising (anxiety and depression) and externalising (anger and aggression) symptoms in adolescence according to gender, as well as personal resources (self-esteem, social competence and integration, and awareness of problems) put in place as a mechanism of protection and coping after the situation of the pandemic. The study population encompassed 445 adolescents, of whom 230 were boys and 215 were girls, between the ages of 12 and 17. A self-reported Likert-type test was used. Findings indicate that girls show greater levels of internalising (anxiety and depression) and externalising problems (anger), finding no differences for the variable aggression between the two groups. Personal resources are closely linked to emotional symptomatology, providing a source of protection in both genders. The findings indicate a maladaptive pattern for adolescents that requires early intervention within the field of education.

Risk attitudes are relevant factors affecting the production and investment decisions at farm level. They are key factors that are related to farmers’ attitudes towards environment and climate change. Several methodological approaches are available to measure the level of stated risk of an economic agent. The Multiple Price List (MPL) method is one of the methods that is gaining relevance. In this study we apply the MPL and relate the risk outcomes with farmers’ characteristics and their perception towards environment and climate change. Data was collected using a face to face survey carried out for a group of 370 agricultural producers of the irrigation district located in northwest of Mexico. Results showed an average risk of about 0.32, locating the agricultural producers of the region in a group with risk aversion, according to the MPL scale. The heterogeneity analysis showed that the socioeconomic factors and the perceptions towards climate change are related to the farmers´ stated risk level. Farmers who are young women with propensity to use public support to invest were shown to be greater risk lovers. Farmers in the region have perceived climate change to a greater extent like floods, hail, diseases and pests, and changing vegetation.

Systems Engineering is an ubiquitous discipline of Engineering overlapping industrial, chemical, mechanical, manufacturing, control, software, electrical, and civil engineering. It provides tools for dealing with the complexity and dynamics related to the optimisation of physical, natural, and virtual systems management. This paper presents a review of how multi-agent systems and complex networks theory are brought together to address Systems Engineering and management problems. The review also encompasses current and future research directions both for theoretical fundamentals and applications in Industry. This is made by considering trends such as mesoscale, multiscale, and multilayer networks; along with the state-of-art analysis on network dynamics and intelligent networks. Critical and smart infrastructure, manufacturing processes, and supply chain networks are instances of research topics for which this literature review is highly relevant.

Due to their contribution to human health, the production of healthy snacks has garnered the attention of both the scientific community and the food industry. This study was conducted to determine the suitability of frying and baking processing methods for producing green banana chips using two varieties: Barraganete and Dominico. The aim was to identify a treatment geared towards producing healthy snacks. Initially, the physicochemical properties of the raw materials were analyzed, revealing significant differences in starch, fat, fiber, and protein content. Subsequently, the bananas were processed into baked and fried chips. Multivariate statistical techniques such as ANCOVA, MANOVA, and post-hoc tests were applied to examine the influence of initial characteristics and detect variations attributable to the cooking method. The main findings showed that the initial protein level had a significant covariate effect on the final content in the chips. The Dominico variety generally proved more suitable for making baked chips, retaining higher percentages of protein, starch, fiber, and lower fat content than Barraganete. Baked chips showed significantly lower sodium and fat values than fried ones when differentiated by processing method. The "Dominico + Baked" treatment emerged as the superior alternative, with favourable levels of protein, starch, and low sodium and fat, positioning it as the most suitable for producing a healthy snack.

1) Background: Northwest Syria (NWS), is a conflict-affected and unstable area. Due to its limited health infrastructure, accessing advanced COVID-19 testing services is challenging. COVID-19 antigen rapid diagnostic tests (Ag-RDTs) have the potential to overcome this barrier. Therefore, a pilot project was implemented to introduce Ag-RDTs in this setting aiming to a) describe the feasibility, uptake, and results of Ag-RDTs; and b) identify facilitators and barriers to Ag-RDTs testing. 2) Methods: A cross-sectional study design involving secondary analysis of data collected during the project’s monitoring was developed. A local NGO implemented 25,000 Ag-RDTs cross boarder through trained community health workers. 3) Results: A total of 27,888 persons were found eligible and enrolled, of which 24,956 (89.5%) consented to test and 121 (0.5%) were found positive. Highest positivity was observed among those with severe COVID-19 symptoms (12.7%), those with respiratory illnesses (2.5%), persons enrolled at Afrin Hospitals (2.5%), and healthcare workers (1.9%). A non-random sample of 236 people underwent confirmatory rt-PCR test. Accordingly, observed sensitivity, specificity, positive and negative predictive values, were 80.0%, 96.1%, 91.4% and 90.3%, respectively. Key encountered challenges included obtaining informed consent and conducting confirmatory rt-PCR testing. 4) Conclusion: This project demonstrated great feasibility utilizing Ag-RDTs as a screening/diagnostic tool for COVID-19 infections with nearly 90% uptake. Considering the high specificity and negative predictive values and the higher positivity rates among severe COVID-19 symptomatic, embedding Ag-RDTs into COVID-19 testing strategies for ruling out and in COVID-19 infections would hold a great advantage.

Oxidative stress has been implicated in cellular senescence and aging, as well as in the onset and progression of many diverse genetic and acquired diseases and conditions. The search for biomarkers of oxidative stress has become relevant to many biomedical fields using many different methods and approaches. Fluorescence methodology is advantageous because of its simplicity and high sensitivity. Fluorescent probes are frequently used to investigate the role of reactive oxygen species in oxidative stress in experimental or clinical settings, often involving the use of flow cytometry and related single-cell based technologies. To assess the specific role of reactive oxygen species in oxidative stress studies by cytometric methodologies, it is essential to detect and characterize these species accurately. However, the detection and quantitation of individual intracellular ROS is still a challenge, but different and complementary strategies may focus on other endpoints of oxidative stress. In this review we present and discuss briefly the limitations and perspectives of such approaches. Based on our results, we also provide recommendations for proper design of cytometric studies of oxidative stress in order to prevent or minimize experimental errors..

Our image recognition system mainly judges whether the left upper limb in the image is the left upper limb or the right upper limb through our deep learning model in the image. The doctor then could give the correct surgical position. From the experimental results, it could be found that the precision rate and recall rate of the intelligent image recognition system proposed in this paper for preventing the upper limb dislocation surgery could reach 98% and 93%, respectively. It proved that our artificial intelligent image recognition system, AIIRS, could indeed assist orthopedic surgeons to prevent the occurrence of left and right dislocation in upper limb surgery. At the same time, this paper also completes the IRB application approval through the prototype experimental results and will conduct the second phase of human trials in the future. It showed that the research results of this paper will be of great benefit and research value to upper limb orthopedic surgery.

Our image recognition system mainly judges whether the left upper limb in the image is the left upper limb or the right upper limb through our deep learning model in the image. The doctor then could give the correct surgical position. From the experimental results, it could be found that the precision rate and recall rate of the intelligent image recognition system proposed in this paper for preventing the upper limb dislocation surgery could reach 98% and 93%, respectively. It proved that our intelligent image recognition system could indeed assist orthopedic surgeons to prevent the occurrence of left and right dislocation in upper limb surgery. At the same time, this paper also completes the IRB application approval through the prototype experimental results and will conduct the second phase of human trials in the future. It showed that the research results of this paper will be of great benefit and research value to upper limb orthopedic surgery.

‘Arrayana’ mandarin fruits have a short postharvest life and are sensitive to chilling injury (CI) during cold storage. Brassinosteroids (BR) have been used as a sustainable technology to alleviate CI in fruits and improve postharvest quality. This study evaluated the effect of applying the 24-epibrasinolide analogue (EBR), at doses of 5 mg L-1; DI-31 analogue, at 5 and 10 mg L-1; and control, on the main physical and biochemical characteristics of 'Arrayana' mandarin stored at 4°C for 40 days and, subsequently, 7 days at room temperature (shelf life). The application of EBR and DI-31 analogues reduced the appearance of CI in the exocarp of 'Arrayana' mandarin fruits by reducing electrolyte leakage, maintaining membrane integrity, and increasing antioxidant activity and phenol content at the end of cold storage and shelf life. This was especially pronounced with 5 mg L-1 of EBR. Similarly, the BR maintained the postharvest quality of mandarins by reducing weight loss, respiratory intensity and chlorophyll degradation; increasing β-carotene; and maintaining titratable acidity, and soluble solids. Our research reports for the first time CI tolerance in Arrayana mandarin using natural (EBR) and spirostanic (DI-31), analogues and illustrates the tolerance functionality of the DI-31 analog on CI in fruit postharvest.

Increased connectivity between coastal lagoons and the sea is expected to entail a greater proportion of marine species in the former. Chetumal Bay, estuary of the Hondo river into the Caribbean, had a limited access to the sea until the opening of the Zaragoza Canal. We sought changes in the fish community from 1999-2001 (just after an expansion of the canal) to 2015-2018. The same fishing gear was used, in the same localities, during all seasons. Total fish abundance and mean local richness decreased, although total abundance increased in the polyhaline zone. Diversity was greater in the oligohaline zone in 1999-2001, but in the mesohaline zone in 2015-2018. Three guilds were absent in 2015-2018: medium-sized herbivores, large piscivores, and medium-sized planktivores. Abundance of small benthivores decreased by decade; medium-sized piscivores and small planktivores became more abundant in 2015-2018 in the polyhaline zone. These changes may be due to the opening of the channel, but illegal fishing outside the bay may explain the decrease in juveniles of large piscivores, and erosion in the innermost part may be destroying important habitats. Our findings can be a reference for similar situations, as coastal development and climate change interact and affect tropical estuaries.

Hormones act as master ripening regulators. In non-climacteric fruit ABA plays a key role in ripening. Recently we confirmed in Fragaria chiloensis fruit that in response to ABA treatment the fruit induces ripening associated changes such as softening and color development. In consequence with these phenotypic changes, transcriptional variations associated with cell wall disassembly and anthocyanins biosynthesis were reported. As ABA stimulates ripening of F. chiloensis fruit, the molecular network involved in ABA metabolism was analyzed. Therefore, the expression level of genes involved in ABA biosynthesis and ABA perception were quantified during development of the fruit. Four NCED/CCDs and 6 PYR/PYLs family members were identified in F. chiloensis. Bioinformatics analyses confirmed the existence of key domains related to functional properties. Through RT-qPCR analyses the level of transcripts were quantified. FcNCED1 codifies a protein that displays crucial functional domains and the level of transcripts increased as the fruit develops and ripens, in parallel with the increment in ABA. In addition, FcPYL4 codifies for a functional ABA receptor and its expression follows an incremental pattern during ripening. The study concludes that FcNCED1 is involved in ABA biosynthesis, meanwhile FcPYL4 participates in ABA perception during ripening of F. chiloensis fruit.

The results of the bibliographic analysis show that the most explored nanomaterials in dentistry are graphene and carbon nanotubes, and their derivatives. A detailed analysis and a comparative study on their applications show that, although they are quite similar, graphene based materials seem to be more promising for most of the applications of interest in dentistry. The bibliographic study also demonstrated the potential of zeolite based materials, although the low number of studies on their applications shows that they have not been totally explored, as well as other porous nanomaterials that found important applications in medicine, such as metal organic frameworks, have not been explored. Subsequently, it is expected that the research effort will concentrate in graphene and zeolite based materials in the incoming years. Thus, present review paper presents a detailed bibliographic study, with more than 200 references, in order to describe briefly the main achievements that have been described in dentistry using nanomaterials, compare and analyze them in a critical way, with the aim of predicting the future challenges.

This research investigates the application of Fused Filament Fabrication (FFF) in producing WC-10Co hardmetals, focusing binder formulations and understanding its influence on extrusion force and the influence of printing variables on green density of the samples. By examining the interplay between different binder compositions and backbone contents, the study aims to enhance the mechanical properties of the sintered parts while reducing defects inherent in the printing process. Evidence suggested that formulated feedstocks influenced the hardness of the sintered hardmetal, not due to microstructural changes but to macrostructural responses like macro defects introduced during printing, debinding and sintering of the samples. The results demonstrate the critical role of PP-MA content in improving part density and sintered hardness, suggesting the need for specific thermal debinding protocols tailored to each feedstock. The study provides insights into the formulation of feedstocks for hardmetal FFF, proposing a path toward refining manufacturing processes for better quality and performance of 3D printed hardmetal components.

In this paper, the active front-end (AFE) converter topology for the total harmonic distortion (THD) reduction in a wind energy system (WES) is used. A higher THD results in serious pulsations in the wind turbine (WT) output power and in several power losses at the WES. The AFE converter topology improves capability, efficiency and reliability in the energy conversion devices; by modifying a conventional back-to-back converter, from using a single voltage source converter (VSC) to use pVSC connected in parallel the AFE converter is generated. The THD reduction is done by applying a different phase shift angle at the carrier of digital sinusoidal pulse width modulation (DSPWM) switching signals of each VSC. To verify the functionality of the proposed methodology, the WES simulation in Matlab-Simulink® is analyzed, and the experimental laboratory tests using the concept of rapid control prototyping and the real-time simulator Opal-RT® Technologies is achieved. The obtained results show a type-4 WT with total output power of 6MVA, generating a THD reduction up to 5.5 times at the WES.

Groundwater models serve as support tools to among others: assess water resources, evaluate management strategies, design remediation systems and optimize monitoring networks. Thus, the assimilation of information from observations into models is crucial to improve forecasts and reduce uncertainty of their results. As more information is collected routinely due to the use of automatic sensors, data loggers and real time transmission systems; groundwater modelers are becoming increasingly aware of the importance of using sophisticated tools to perform model calibration in combination with sensitivity and uncertainty analysis. Despite their usefulness, available approaches to perform this kind of analyses still present some challenges such as non-unique solution for the parameter estimation problem, high computational burden and a need of a deep understanding of the theoretical basis for the correct interpretation and use of their results, in particular the ones related to uncertainty analysis. We present a brief derivation of the main equations that serve as basis for this kind of analysis. We demonstrate how to use them to estimate parameters, assess the sensitivity and quantify the uncertainty of the model results using an example inspired by a real world setting. We analyze some of the main pitfalls that can occur when performing such kind of analyses and comment on practical approaches to overcome them. We also demonstrate that including groundwater flow estimations, although helpful in constraining the solution of the inverse problem as shown previously, may be difficult to apply in practice and, in some cases, may not provide enough information to significantly constrain the set of potential solutions.

Several studies with kaempferol (KP) and linearolactone (LL) have shown antiparasitic activities. However, the toxicity of treat-ments with both active principles is unknown. Therefore, this study aimed to evaluate the toxicological effects of treatments with KP and LL on the amoebic liver abscess (ALA) model in M. auratus administered intraperitoneally (i.p.). For this, ALA in-duction was carried out in male hamsters with 1.5 x105 E. histolytica trophozoites inoculated in the left hepatic lobe. The lesion evolved for four days and the i.p. of the treatments with KP (5 mg/kg body weight/day) and LL (10 mg/kg body weight/day) was carried out for four consecutive days. For histopathological evaluation, NMR studies, paraclinical analysis, and necropsy were performed. The results revealed that the inhibition of ALA by KP and LL were similar to that metronidazole (MTZ). Biochemical parameters revealed hepatic and renal alterations in all treatment groups, mainly for KP (AST and BUN). The lesions found in the organs were those that are directly linked to the pathology. In conclusion, KP and LL decrease ALA development but have few toxicological effects. Both compounds combined with MTZ could be therapeutic alternatives for amoebiasis caused by E. histolytica.

The role of agricultural transport costs in core-periphery structures has habitually been ignored in New Economic Geography (NEG) models. This is due to the convention of treating the agricultural good as the numéraire, thus implying that agricultural transportation costs are assumed to be zero in these models. For more than three decades, this has been the standard setting in spatial equilibrium analysis. The paper examines the effects of agricultural transport costs on the spatial organisation of regional structures in Peru. In doing so, the Krugman’s formulation of iceberg transport costs is modified to introduce the agricultural transport costs into the dynamic of the NEG models. We use exploratory spatial flow data analysis methods and non-spatial and spatial origin-destination flow models to explore how the regional spatial structure change when real transportation data for agricultural goods is included into the iceberg transport costs formulation. We show that agricultural transport costs generate flows that are systematically associated with flows to or from nearby regions generating thus the emergence of spatial spillovers across Peruvian regions. The results of the paper support the contention that NEG models have overshadowed the role of agricultural transport costs in determining the spatial configuration of economic activities.

The practice of spatial econometrics revolves around a weighting matrix, which is often supplied by the user on previous knowledge. This is the so called $\mathbf{W}$ issue. Probably, the aprioristic approach is not the best solution although, nowadays, there few alternatives for the user. Our contribution focuses on the problem of selecting a $\mathbf{W}$ matrix from among a finite set of matrices, all of them considerer appropriate for the case. We develop a new and simple method based on the Entropy corresponding to the distribution of probability estimated for the data. Other alternatives, which are common in current applied work, are also reviewed. The paper includes a large Monte Carlo to calibrate the effectiveness of our approach compared to the others. A well-known case study is also included.

: This study aims at examining how B Corporations advance Sustainable Development Goals (SDGs) in their practices by analyzing the socioenvironmental problems they address and the solutions they provide to those problems. All Argentinian B corporations, certified by early 2023 (135 companies), were investigated using a mixed approach, combining social network analysis with textual data analysis. The results showed that the environmental practices are primarily linked to waste, water, energy and chemical management, as well as product innovation. In turn, the social practices address the training, education, and well-being of employees and other stakeholders, diversity, equity and inclusion management, and the creation of an inclusive and fair environment, integrating local communities. Thus, in the flow of their sustainability practices, Argentinian B Corporations contribute to SDGs 8, 12, 13, 9, 6, 7, 5, 10, 11, 4, and 17, in line with the SDGs declared by these companies. Our findings contribute to the theoretical knowledge of the B Corp movement and have practical implications by providing inputs to improve the management of B Corporations and to guide public policies encouraging these companies to advance sustainable development dimensions lacking attention.

The twelve cranial nerves play a crucial role in nervous system, orchestrating a myriad of functions vital for our everyday life. These nerves are each specialized for particular tasks. Cranial Nerve I, known as the olfactory nerve, is responsible for our sense of smell, allowing us to perceive and distinguish various scents. Cranial Nerve II, or the optic nerve, is dedicated to vision, transmitting visual information from the eyes to the brain. Eye movements are governed by Cranial Nerves III, IV, and VI, ensuring our ability to track objects and focus. Cranial Nerve V controls facial sensation and jaw movement, while Cranial Nerve VII, the facial nerve, facilitates facial expressions and taste perception. Cranial Nerve VIII, or the vestibulocochlear nerve, plays a critical role in hearing and balance. Cranial Nerve IX, the glossopharyngeal nerve, affects throat sensation and taste perception. Cranial Nerve X, the vagus nerve, is a far-reaching nerve, influencing numerous internal organs such as the heart, lungs, and digestive system. Cranial Nerve XI, the accessory nerve, is responsible for neck muscle control, contributing to head movement. Finally, Cranial Nerve XII, the hypoglossal nerve, manages tongue movement, essential for speaking, swallowing, and breathing. Understanding these cranial nerves is fundamental in comprehending the intricate workings of our nervous system and the functions that sustain our daily lives.

Urban wind energy has emerged as an attractive source of distributed generation in cities to achieve sustainable development goals. The advance in technologies for the use of urban wind energy has turned this source into an attractive alternative for the decarbonization of cities and the energy transition. The objectives of this work are (1) to identify the potential of wind energy through numerical weather prediction (NWP) data tools and (2) to identify the roles and responsibilities of the stakeholders involved in the decision-making process. A methodology was developed in two phases and applied to a case study in the Dominican Republic. The first phase consisted of estimating the wind energy potential for the 32 provinces at a height of 10 m using open-access geographic reference systems tools provided by NASA. In the second phase, 28 stakeholders were identified through snowball sampling. The Responsible, Accountable, Consult, and Informed (RACI) matrix tool was applied to identify the roles of the 28 institutions addressed at the country level as relevant in the decision-making process for the energy sector. The annual average wind speed and energy potential for each province were determined. It was found 24 provinces have poor potential, below <4.5 m/s. In the northwest and east is where there is the greatest potential, between 4.83 - 6.63 m/s. The population density was established and was observed that the provinces with greater potential are less densely populated. Through 59 interviews 28 institutions were identified and evaluated due to their relevance in decision-making for the implementation of energy projects. The MEM has strongly categorized as “A”, electricity distribution companies as “R”, energy associations and universities as “C”, and educational and justice institutions as “I”.

Our bodies produce a host of electrophilic species that can label specific endogenous proteins in cells. The signaling roles of these molecules are underactive debate. However, in our opinion it is becoming increasingly likely that electrophiles can rewire cellular signaling processes at endogenous levels. Attention is turning more to understanding how nuanced electrophile signaling in cells is. In this perspective, we describe recent work from our laboratory that has started to inform on different levels of context-specific regulation of proteins by electrophiles. We discuss the relevance of these data to the field, and to the broader application of electrophile signaling to precision medicine development, beyond the traditional views of their pleiotropic cytotoxic roles.

Pure monocular 3D reconstruction is an ill-posed problem that has attracted the research community's interest due to the affordability and availability of RGB sensors. SLAM, VO, and SFM are disciplines formulated to solve the 3D reconstruction problem and estimate the camera’s ego-motion, so many methods have been proposed. However, most of these methods were not evaluated in large datasets, under various motion patterns, had not been tested under the same metrics, and most of them had not been evaluated following a taxonomy, making their comparison and selection difficult. In this research, we performed a comparison of ten publicly available SLAM and VO methods following a taxonomy, including one method for each category of the primary taxonomy, three machine learning-based methods, and two updates of the best methods, to identify the advantages and limitations of each category of the taxonomy and test if the addition of machine learning or the updates made on those methods improved them significantly. Thus, we evaluated each algorithm under the TUM-Mono benchmark and performed an inferential statistical analysis to identify significative differences through its metrics. Results determined that sparse-direct methods significantly outperformed the rest of the taxonomy, and fusing them with machine learning techniques significantly improves the performance of geometric-based methods from different perspectives.

In the knowledge era, intellectual capital has been considered a key factor in creating value within organisations. This study examines the relationships and interactions between the components of intellectual capital and the profitability of Panamanian banking, and financial institutions listed on the Latin American Stock Exchange (LATINEX) from 2014 to 2020. Utilising the Valued-Added Intellectual Coefficient (VAIC)™ model, which evaluates the intellectual capital of organisations based on information from financial statements, the study constructs a regression model to examine the relationship between the Return on Equity (ROE) and the components of the VAIC™. The findings confirm the study’s hypothesis, demonstrating that the Structural Capital Efficiency (SCE) and company size (SIZE) variables explain 57% of the variance in ROE for the analysed institutions. The results suggest that the Intellectual Capital (IC) of financial sector institutions listed on LATINEX is significantly influenced by the SCE coefficient, which shows a negative relationship, suggesting that investment in structural capital does not enhance profitability. On the other hand, larger institutions exhibited higher profitability during the study period.

Clove (Syzygium aromaticum L. Myrtaceae) is an aromatic plant widely cultivated in tropical and subtropical countries, rich in volatile compounds and antioxidants such as eugenol, β-caryophyllene, and α-humulene. Clove essential oil has received considerable interest due to its wide application in the perfumery, cosmetic, health, medical, flavoring, and food industries. Clove essential oil has relevant biological activities to human health, including antimicrobial, antioxidant, and insecticide. This review describes the effect of the extraction method (hydrodistillation, steam distillation, ultrasound-assisted extraction, microwave-assisted extraction, cold pressing, and supercritical fluid extraction) on the chemical composition of essential oil and its correlation with their biological activities. Likewise, are summarized the main compounds and their reported biological activities. Furthermore, the main applications in clove essential oil in the food industry are presented. Finally, this review presents the new biological activities such as anti-inflammatory, analgesic, anesthetic, antinociceptive and anticancer, which are beneficial for human health. This review aims to compile the effect of different methods of extracting clove essential oil on chemical composition, food applications, as well as a current description of biological activities of interest to human health. Biological activities have increased interest in research into this essential oil and its future applications in the food or pharmaceutical industry.

This study aimed to evaluate the impact of Candida albicans on subgingival biofilm formation on dental implant surfaces. Scanning electron microscopy (SEM) and confocal laser scanning microscopy (CLSM) were used to compare biofilm structure and microbial biomass in the presence and absence of the fungus after periods of 24, 48, and 72 h. Quantitative polymerase chain reaction (qPCR) was used to quantify the number of viable and total micro-organisms for each of the biofilm-forming strains. A general linear model was applied to compare CLSM and qPCR results between control and test conditions. The biofilm developed with C. albicans at 72 h had a higher bacterial biomass, with a significantly higher cell viability (p < 0.05). After both 48 and 72 h of incubation, in the presence of C. albicans, there was a significant increase in counts of Fusobacterium nucleatum and Porphyromonas gingivalis and in the cell viability of Streptococcus oralis, Aggregatibacter actinomycetemcomitans, F. nucleatum, and P. gingivalis. Using a dynamic in vitro multispecies biofilm model, C. albicans exacerbated the development of the biofilm grown on dental implant surfaces, significantly increasing the number and cell viability of periodontal bacteria.

This article addresses the problem of formation control of a quadrotor and one (or more) marine vehicles operating at the surface of the water with the end goal of encircling the boundary of a chemical spill, enabling such vehicles to carry and release chemical dispersants used during ocean cleanup missions to break-up oil molecules. Firstly, the mathematical models of the Medusa class of marine robots and quadrotor aircrafts are introduced, followed by the design of single vehicle motion controllers that allow these vehicles to follow a parameterized path individually using Lyapunov based techniques. At a second stage, a distributed controller using event triggered communications is introduced, enabling the vehicles to perform cooperative path following missions according to a pre-defined geometric formation. In the next step, a real time path planning algorithm is developed that makes use of a camera sensor, installed on-board the quadrotor. This sensor enables the detection in the image of which pixels encode parts of a chemical spill boundary and use them to generate and update in real time a set of smooth B-spline based paths for all the vehicles to follow cooperatively. The performance of the complete system is evaluated by resorting to 3-D simulation software, making it possible to simulate visually a chemical spill. Results from real water trials are also provided for parts of the system, where two Medusa vehicles are required to perform a static lawn-mowing path following mission cooperatively at the surface of the water.

The shoot apical meristem (SAM) gives rise to the aerial structure of plants by producing lateral organs and secondary meristems. The SAM is responsible for plant developmental patterns, thus determining plant morphology and, consequently, many agronomic traits such as the number and size of fruits and flowers and kernel yield. Our current understanding of SAM morphology and regulation is based on studies conducted mainly on some angiosperms, including economically important crops such as maize (Zea mays) and rice (Oryza sativa), and the model species Arabidopsis (Arabidopsis thaliana). However, studies in other plant species from the gymnosperm class are scant, making difficult comparative analyses that help us understand SAM regulation in diverse plant species. This limitation prevents deciphering the mechanisms by which evolution gave rise to the multiple plant structures within the plant kingdom, and determined the conserved mechanisms involved in SAM maintenance and operation. This review aims to integrate and analyze the current knowledge of SAM evolution by combining the morphological and molecular information recently reported from the plant kingdom.

The role that Colombia will play in terms of food supply in the coming years has generated a discussion on the agricultural practices implemented, specifically in the use of pesticides. Therefore, this article aims to provide a comprehensive and complete review of the status of pesticide use in the agricultural sector, highlighting the agri-food industry in Colombia. Currently, the use of pesticides has intensified throughout the world, generating a call for attention by governmental entities in terms of regulation. Colombia for the year 2019 presented a rate of use of 7.8 kg/ha of pesticides, placing it among the twenty countries with the highest rate. On the other hand, the quantities and economic benefits of exports and imports are growing steadily. Several organizations have focused their efforts on determining the health consequences that people exposed to chronic and/or acute intoxication may suffer. This has led to cases of cytogenetic, neurocognitive and physical effects, prompting governmental organizations to regulate the use of pesticides. Finally, the need to design pesticide management and handling systems that respond to the needs of producers and the sector, integrating international food safety guidelines, is identified.

(1) Background: Grapes and their associated by-products (as grape pomace, GP) stand out for their polyphenol content, which makes them a source of bioactive compounds with antioxidant capacity. The aim of this research was to determine if the inclusion of 50 g/kg of GP in the diet of hens could enrich egg with antioxidants and to study its effect on internal and external egg quality parameters. (2) Methods: A trial was conducted with two genetic lines of hens, which were fed either a control diet or a diet containing 50 g/kg of GP. Performance, internal and external egg quality, and egg yolk content of vitamins E and A, and gallic acid were determined; (3) Results: In eggs laid by hens fed GP diet, Haugh units and yolk colour score were enhanced, and eggshell became thinner, but without affecting the breaking strength. No dietary effect was observed on vitamin contents in yolk. Higher gallic acid content was observed in yolk of eggs laid by hens fed the GP diet, suggesting that some dietary phenolic compounds could be transferred to the eggs. Hen genetics influenced egg weight, albumen Haugh units, shell thickness and α- and γ-tocopherol concentration in yolks; (4) Conclusions: Dietary inclusion of GP improved the internal quality of eggs, enriching yolks with a phenolic compound, but reduced shell thickness.

Brushless Synchronous Machines (BSM) are replacing conventional synchronous machines with static excitation in generation facilities due to the absence of sparking and lower maintenance. However, this excitation system makes challenging measuring electric parameters in the rotor. This fact highly difficult the detection of ground faults, which are the most common type of electrical fault in electric machines. In this paper, a ground fault detection method for BSM is proposed. It is based on an inductive AC/DC rotating current sensor installed in the shaft. In case of a ground fault in the rotating parts of the BSM, a fault current will flow through the rotor’s sensor, inducing voltage in its stator. Analyzing the frequency components of the induced voltage the detection of a ground fault in the rotating elements is possible. The ground faults detection method proposed covers the whole rotor and discern between DC and AC sides. To corroborate the detection method, experimental tests have been performed using a prototype of this sensor connected to laboratory synchronous machines achieving satisfactory results.

Dental pulp chamber volume is a fundamental measurement in the field of endodontics, but also in forensic sciences, teaching and training, or tissue engineering. This study evaluates the precision of cone beam computed tomography (CBCT) in comparison with computed micro-tomography (micro-CT) in evaluating pulp chamber volume of upper central incisors ex vivo. The intra-operator and inter-operator error were evaluated, and the results for the two techniques were compared with a T-test for paired samples. Intra-operator and inter-operator errors were >0.05, indicating an adequate reproducibility in each operator and no significant differences between their meas-urements. On the other hand, no significant differences between the two measurement techniques. The present results demonstrate that CBCT is a precise, feasible and reproducible technique for evaluation of dental pulp chamber volume ex vivo. Results provided with this method are suitable for different medical branches but also for teaching and training of undergraduate and post-graduate students. Furthermore, the findings of this study carry significant clinical implications, as accurate assessment of pulp chamber volume is critical in the diagnosis and treatment of various endodontic conditions. The ability of CBCT to provide reliable 3D dental anatomy measurements can enhance the planning of endodontic treatments by allowing for a better understanding of internal tooth morphology. Additionally, the precision and reproducibility of CBCT in assessing pulp chamber volume can contribute to improved clinical outcomes and reduced complications during endodontic procedures. These findings further support the increasingly vital role of CBCT in modern clinical practice and underscore its value as an indispensable tool in the field of dentistry.

Oritavancin is a novel long-acting lipoglycopeptide with in vitro activity against methicillin-resistant (MR) Gram-positive pathogens and a good bactericidal activity even in presence of biofilm forming bacteria. It has been approved for acute bacterial skin and skin structure infections (ABSSSI), but recent reports have demonstrated possible off-label uses, as for prosthetic joint infections (PJI), which, in more than half of cases, are caused by MR Gram positive organisms. We reported a case of a man in his eighties with a late shoulder PJI caused by methicillin resistant Staphyloccus epidermidis (MRSE) with contraindications for surgical replacement and few oral therapeutic options for a long term suppressive antibiotic therapy. The prosthesis was retained, and the patient received ten outpatient sequential doses of 1200 mg of oritavancin during 28 weeks, based on therapeutic drug monitoring (TDM) as a guide for correct timing of administration of each dose. During oritavancin administration, the patient achieved clinical cure, with disappearance of the pain and regaining pre-infection joint mobility, with no side effects reported and no further surgery or hospitalization needed. The treatment is ongoing as a long-lasting suppressive antimicrobial therapy. Oritavancin could represent an excellent solution for treating PJI caused by MR organism, especially in patients who need a long-term suppressive therapy.

In this study, ignition delay and burning rate are experimentally investigated in relation to the effect of pristine carbon nanotubes (CNTs), sodium dodecylbenzene sulfonate (SDBS), and diesel blends. Single droplet combustion tests were conducted in a combustion system for 21 days using CNTs at concentrations of 50 ppm and 100 ppm, that were dispersed in Colombian commercial diesel and stabilized by SDBS. Additionally, recordings of the combustion were collected, and the Shadowgraph optical method was utilized for monitoring the evolution of droplet size during combustion. The measurements were done over a four-week period. The results demonstrated that the temporal stability has a direct impact on the single droplet combustion tests because a concentration of CNTs of 100 ppm showed higher stability than those achieved by 50 ppm. Consequently, improvements were found with a concentration of 100 ppm, for instance, thermal conductivity increased by about 20%, ignition delay time by 16.2%, and burning rate by 30.5%.

Mexico´s inhabitants have approximately 7 million dogs and cats as pets, of which there is no accurate information about their environmental impacts as a result of their feeding and comfort requirements. The objective of this study is to compare the environmental footprint between a dog and a cat in a family environment. For this purpose, a life cycle analysis was performed including, among other factors, its feeding and waste management in one year of life. Different environmental indicators including the carbon footprint were considered. It was found that the equivalent CO2 emission of a dog is twice that estimated for a domestic cat and that the main contribution is due to the food production. The ecological footprint that is generated when satisfying the requirements for pet´s well-being impacts in the environment contributes primarily to the carbon footprint.

Paving blocks are concrete pieces placed in exposed places to the weather, which are sub-jected to loads and wear. Hence, quality control in the manufacture of paving blocks is es-sential to guarantee the properties and durability of the product in construction projects. In Ecuador, the requirements are described in the Ecuadorian technical standard "NTE INEN 3040", and tensile splitting strength is a fundamental requirement to guarantee product quality. It is analyzed using quality control measurements such as dimensions, the weight of the fresh paving block in the vibro-compacted process, and the percentage of water absorption in order to know how the variables influence and manage to predict the tensile splitting strength to avoid product non-conformity in advance, having a timely and better control of the manufacturing process. The data was obtained from a company that can produce 30 000 units per day of rectangular paving blocks with 6 cm thickness. Mul-tivariate models such as multiple linear regression, regression trees, random forests and neural networks are performed to predict the tensile splitting strength variable through two groups of predictors; the first group is the thickness mm, width mm, length mm, mass of fresh paving block g and percentage of water absorption %. The second group of pre-dictor variables is the density of the fresh paving block kg/m3 and the percentage of water absorption %. It is concluded that the multiple linear regression method performs better in predicting the first group of predictor variables with a mean square error (MSE) of 0.110086, followed by the neural network without hidden layers resulting in an MSE of 0.112198. The best method for the second set of predictors was the neural network with-out hidden layers with a mean square error ( MSE ) of 0.112402, closely followed by the multiple linear regression model with an MSE of 0.115044.

While digitization can make the health industry faster and more efficient, there are many financial, social and organizational obstacles and barriers to its implementation. This article offers a systematic review of the main troubles detected from the literature review. Also there is a proposal of new kind of restrictions to pay attention. Finally, its offer an heterodox reading about the problem analyzed.

To assist Java programming learning of novice students, we have developed the web-based Java programming learning assistant system (JPLAS). JPLAS provides several types of exercise problems to cultivate code reading/writing skills at various levels. In JPLAS, the code writing problem (CWP) asks a student to write a source code that will pass the test code given in the assignment where the correctness is verified by running them on JUnit. In this paper, to reduce the teacher load at marking process, we present the answer code validation program that verifies all the source codes from a lot of students for each assignment at a time and reports the number of passing tests for each source code in the CSV file. Besides, to test a source code with various input data, we implement the test data generation algorithm that identifies the data type, generates a new data, and replaces it for each test data in the test code. Furthermore, to verify the correctness of the implemented procedure in the source code, we introduce the intermediate state testing in the test code. For evaluations, we applied the proposal to source codes and test codes in a Java programming course in Okayama university, Japan, and confirmed the validity and effectiveness.

Finishing coatings in the wood-based composites industry not only influence the final appearance of the product but also serve to protect against fungi, and molds, and reduce the release of harmful substances, particularly formaldehyde and volatile organic compounds (VOCs). Carbon-rich materials, such as those derived from birch bark extraction, specifically suberin acids, can fulfil this role. Previous research has demonstrated that adding suberin acid residues (SAR) at 20% and 50% by weight significantly enhances the gas barrier properties of surface finishing materials based on poly(lactide) (PLA) and polycaprolactone (PCL), particularly in terms of Total VOC (TVOC) and formaldehyde emissions. This study aims to explore whether these properties can be further improved through the incorporation of nano-zinc oxide (nano-ZnO). Previous research has shown that these nanoparticles possess strong resistance to biological factors and can positively affect the characteristics of nanofilms applied as surface protection. The study employed PLA and PCL finishing layers blended with SAR powder at 10% w/w and included 2% and 4% nano-zinc oxide nanoparticles. The resulting blends were milled to create a powder, which was subsequently pressed into 1 mm thick films. These films were then applied to raw particleboard surfaces. TVOC and formaldehyde emission tests were conducted. Additionally, the fungal resistance of the coated surfaces was assessed. The results showed that PLA/SAR and PCL/SAR composites with the addition of nano-zinc oxide nanoparticles exhibited significantly improved barrier properties, offering a promising avenue for developing biodegradable, formaldehyde-free coatings in the furniture industry with enhanced features. Furthermore, by utilizing SAR as a post-extraction residue, this project aligns perfectly with the concept of upcycling.

The Musa textilis var. Abuab has high fiber quality (FQ) but has low resistance against abaca bunchy top virus (AbBTV); the Musa balbisiana var. Pacol, has low FQ but high resistance against AbBTV. Their backcrosses (BC2 and BC3) possess both desirable traits. Analysis using RNA-seq showed that the regulatory divergence of Abuab and Pacol is largely explained by cis differences with 27.4% and 22.3% if we are to assess it using BC2 and BC3, respectively. Cis differences between the two genotypes are significantly reduced from BC2 to BC3 due to changes in genomic constitution. Trans, on the other hand, is robust to changes in allelic composition. All these are attributed to the loss of heterozygosity in the BC3 relative to BC2. Further analysis showed that both backcrosses exhibited genome-wide preferential expression of Pacol- over Abuab-specific alleles, despite the wider genetic presence of the latter in the hybrids. The ratio of the two genotype-specific expressed transcripts and the ratio of their corresponding genetic make-up are significantly disproportionate, a phenomenon which we refer here as “genome–transcriptome incongruence”. We also observed preferential expression switching in which several genes prefer Abuab- (or Pacol-) specific allele in the BC2 but switched to Pacol- (or Abuab-) specific allele in the BC3 genome.

We carry out a systematic study on the motion of test particles in the region inner to the naked singularity of a quasi–hyperbolically symmetric γ-metric. The geodesic equations are written and analyzed in detail. The obtained results are contrasted with the corresponding results obtained for the axially symmetric γ-metric, and the hyperbolically symmetric black hole. As in this latter case, it is found that test particles experience a repulsive force within the horizon (naked singularity), which prevents them to reach the center. However in the present case this behavior is affected by the parameter γ which measures the departure from the hyperbolical symmetry. These results are obtained for radially moving particles as well as for particles moving in the θ−r subspace. Possible relevance of these results in the explanation of extragalactic jets, is brought out. .

The mortality of birds resulting from collisions and electrocutions with overhead lines, such as power lines, and phone line among others, has been implicated in the decline of various avian species globally. Specifically, overhead line collisions pose a significant threat to the conserva-tion of the Canarian houbara bustard (Chlamydotis undulata fuertaventurae), an endangered sub-species endemic to the Canary Islands. This study centres on the postmortem findings of Canarian houbara bustards that have collided with overhead lines, providing insights into the post-collision outcomes for these birds. A com-plete standardized necropsy of nine Canarian houbara bustards revealed that polytrauma was the cause of death in all cases. The most notable gross lesions associated with trauma included bone fractures, soft tissue lacerations, haemorrhages, luxations, and hemocoelom, with certain body regions being more frequently affected. Histopathology, immunohistochemistry, and en-tomology analysis confirmed that numerous birds survived the initial trauma, exhibiting varia-ble survival intervals before succumbing to their injuries. We concluded that when a houbara bustard collide with an overhead line it frequently survives the initial trauma. The histopathology, immunohistochemistry, or entomologic analysis may be helpful to approximate the timing interval between trauma and death.

The present work sets out the evaluation of composite laminates through optimization objective functions. Genetic Algorithms (GA), as well as Simulated Annealing (SA), were performed in order to determine the optimal ply orientations of a fiber-reinforced polymer laminate for three given load cases: 1) in-plane loads, 2) combined moments, and 3) in-plane loads and combined moments. It searches the optimal orientation layup, which fulfills at the same time both the maximum strain criterion and the Tsai-Wu failure criterion. Construction of an objective function based on the strains and the stresses involves a minimization process to deformations and a maximization of the safety factor. For the first load case, the initial solution is [±45/0/90/±45]s, and the best solution is [(45/135)2/452]s. For the second load case, [-45/45/45/-45/0/90]s is the initial layup sequence, then the best solution obtained is [(45/-45)2/452]s, where plies at 0° and 90º are not necessary even when axial loads are applied. For the third study case, the original layup sequence is [0/45/-45/45/0/90]s; meanwhile, the best solution calculated is [21/24/145/140/45/49]s. An interesting observation is that each pair of layers has a 5º gap. The simulations show that the qualitative results from the GA are better than the SA, but with a significantly higher computational cost. These kinds of computational tools are expected to be used as a reference guide for an optimal fiber configuration with respect to the common orientations used when composite laminates are designed for a structural application.

This study analyzes tree diversity and its ecological importance value in silvopastoral systems in the Sumaco Biosphere Reserve (SBR), Ecuador, along an altitudinal gradient of 400-2000 masl. Twenty-six plots distributed in low (400-700 masl), medium (701-1600 masl) and high (1601-2000 masl) zones were used. The Shannon index and the Importance Value Index (IVI), based on abundance, dominance and relative frequency, were estimated. The results show variations in the diameter structure of the trees, influenced by factors such as settlement history and pasture management. The lower and middle zones showed higher tree density and diversity, linked to regeneration and the presence of nearby forests. Species of high commercial value, such as Cedrela odorata and Jacaranda copaia, were common, reflecting knowledge of the local timber market. In the lower and middle zones, the 10 most important species accounted for more than 70% of the trees, and up to 96% in the upper zone, indicating the need for further research on abundance factors and promotion of diversification in pastures. A total of 51 tree species were identified, mostly native, 64.7% are classified by the IUCN as "Least Concern", 31.4% as "Not Evaluated", and 3.9% as "Vulnerable", specifically highlighting Cedrela odorata and Cedrela Montana. The study concludes with policy recommendations related to the importance of trees in silvopastoral systems for the conservation of species and the livelihoods of local communities, highlighting the need for responsible management of Amazonian pasturelands.

Aimed to obtain purple garlic varieties, 360 bolting bulbs from the Protected Geographical Indication (PGI) “Las Pedroñeras” were selected for their size, and the presence of abundant external scales. After a further selection, 243 out of the 360 bulbs were discarded due to undesired characteristics, as light purple color, high number of small cloves, cloves affected by Fusarium spp. and mites, among other. It was stablished that each bulb would give rise to a family. Thus, 117 families were planted under a random design during season 2021-2022. Either physiological, morphological and phenological traits were assessed for each family, and the affectations by pest and pathogens were also controlled. After the assessment of this trial, 103 out 117 families remained in the program, and were used for the establishment of a second trial the next season. Unlike the first trial, after the evaluations only 23 families remained in the program. There was observed a high variability for most of traits, with a great influence of families. The phenotypic behavior of families was significative influenced by environment, highlighting the need of their assessment under different environmental conditions. The high variability registered for the target sample, opens the possibility to select new garlic varieties from this PGI.

We explore an idea put forward many years ago by Zeldovich and Novikov concerning the existence of compact objects endowed with arbitrarily small mass. The energy-density of such objects, which we call “Ghost stars”, is negative in some regions of the fluid distribution, producing a vanishing total mass. Thus, the interior is matched on the boundary surface to Minkowski space-time. Some exact analytical solutions are exhibited and their properties are analyzed. Observational data that could confirm or dismiss the existence of this kind of stellar object, is commented.

A semi–numerical approach proposed many years ago for describing gravitational collapse in the post–quasi–static approximation , , , , is modified in order to avoid the numerical integration of the basic differential equations the approach is based upon. For doing that we have to impose some restrictions on the fluid distribution. More specifically, we shall assume the vanishing complexity factor condition, which allows for analytical integration of the pertinent differential equations and leads to physically interesting models. Instead, we show that neither the homologous nor the quasi–homologous evolution are acceptable since they lead to geodesic fluids, which are unsuitable for being described in the post–quasi–static approximation. Also, we prove that, within this approximation, adiabatic evolution also leads to geodesic fluids and therefore we shall consider exclusively dissipative systems. Besides the vanishing complexity factor condition, additional information is required for a full description of models. We shall propose different strategies for obtaining such an information, which are based on observables quantities (e.g. luminosity and redshift), and/or heuristic mathematical ansatz. To illustrate the method, we present two models. One model is inspired in the well known Schwarzschild interior solution, and another one is inspired in Tolman VI solution.

(1) Background: the use of force by Public and Private Security Forces is currently an issue of great relevance because of the potential injuries that any excessive use of force by either the active or passive subjects or a deficit in the real mastery of the appropriate Physical Intervention Techniques (PIT) may cause. For this reason, certain traditionally used Physical Intervention Techniques have been questioned by scientific research studies and punished by justice. On the other hand, certain media have dealt with this matter in a biased and unfair manner by broadcasting videos where the use of force by police officer is displayed out of context. As a consequence, this problem has been brought under the spotlight, causing general uneasiness of the communities and rapidly spreading over social networks while favoring all sorts of parallel judgments. (2) Research method: A suit equipped with 19 Inertial Measurement Units (IMU) and a Biomechanics of Bodies software application for the Marras’ analysis of the data collected on trajectory, trunk twisting velocity, its sagittal angle, load, nature and severity of the injuries associated to the different intervention techniques that have been examined. (3) Results: according to the data registered, the implementation of Operational Tactical Procedures (OTP) reduces the probability of injuries and leads to a more satisfactory outcome. (4) Conclusions: the implementation of Operational Tactical Procedures, to-gether with the awareness on the risks associated to the excessive use of force by Public and Private Security Forces and Bodies, could reduce the risk of injuries suffered by both officers and citizens.

(1)Aims of the study: calculating the underreporting ratio for two different medications, a fixed combination of 0.5% timolol + 0.2% brimonidine + 2.0% dorzolamide (antiglaucoma) and a fixed combination of sodium hyaluronate 0.1% + chondroitin sulfate 0.18% (artificial tear) and characterizing the features influencing the reporting of adverse drug reactions (ADRs) in spontaneous reporting; (2) Methods: the underreporting ratio was calculated by comparing the adverse drug reactions reported in the spontaneous reporting database for every 10,000 defined daily doses marketed and the adverse drug reactions from an active surveillance study for every 10,000 defined daily doses used for different drugs (antiglaucoma and artificial tear). The factors related to the report in spontaneous reporting through statistical tests were also determined; (3) Results: The underreporting ratio of spontaneous reporting was 0.006029% for antiglaucoma and 0.003552% for artificial tear; additionally, statistically significant differences were found for severity, unexpected adverse drug reactions, and incidence of adverse drug reactions in females; (4) Conclusions: The underreporting ratio of ADRs related to ophthalmic medications indicates worry since the cornerstone of pharmacovigilance focuses on spontaneous reporting. Besides, since underreporting seems to be selective, the role of certain aspects like gender, seriousness, severity, and unexpected ADRs, must be considered in future research.

Inherited retinal diseases (IRD) comprise a heterogeneous set of clinical and genetic disorders that lead to blindness. Given the emerging opportunities in precision medicine and gene thera-py, it has become increasingly important to determine whether DNA variants with uncertain significance (VUS) are responsible for the patients’ IRD. This research was performed to assess the functional consequence of six VUS identified in patients with IRD. Clinical assessments in-cluded an ophthalmic examination, best corrected visual acuity, and kinetic perimetry. Imaging was acquired with the Optos ultra-widefield camera and spectral-domain optical coherence to-mography (SD-OCT). Genetic testing was performed by Molecular Vision Laboratories. VUS that were predicted to alter splicing were analyzed with a minigene assay which revealed that VUS in the genes OPA1, CNGB1, and CLUAP1 altered spicing mechanisms. Due to the emerging gene and cell therapies, these results expand the genotype-phenotype correlations for patients diag-nosed with an IRD.

The ciguatera is a food poisoning caused by the consumption of primarily coral fish; these species exist in large numbers in the seas that bathe the Colombian territory. The underreported diagnosis of this clinical entity has been widely highlighted due to multiple factors, as are among others, ignorance by the primary care practitioner consulted for this condition, clinical similarity with secondary gastroenteric symptoms, to common food poisonings of bacterial, parasitic or viral etiology. Eventually people affected by ciguatotoxin are related to trips to coastal areas hours before the onset of symptoms. Thanks to multiple studies over the years it has been possible to identify the relation of the dinoflagellates in the assembly of said toxin and its introduction into the food chain, starting by fish primarily inhabiting reef ecosystems and culminating in the intake of these by humans. Identifying the epidemiological link, its cardinal symptoms and affected systems such as gastrointestinal, peripheral nervous system and fortunately with a low frequency, the cardiovascular system, leads to a purely clinical diagnostic impression without further complementary studies, performing an adequate treatment primarily symptomatic without underestimating or overlooking any associated complications.

The aim of this paper is to establish a valid procedure for better understanding all the phenomena associated with the high-speed machining of Glass Fibre Reinforced Plastic (GFRP) composites. Both rectangular and circular specimens were machined at high speeds (up to 50 m/min) in order to understand what occurred for all values of fiber orientation angles during machining operations. An innovative testing methodology was proposed and studied to investigate the phenomenon of burr formation and thus understand how to avoid it during machining operations. To this end, the forces arising during the machining process and the roughness of the resulting surface, were carefully studied and correlated with the cutting angle. Additionally, the cutting surface and chip morphology formed during cutting tests were examined using a high-speed camera. Close correlations are found between the variations of the cutting forces' signals and the trends of the roughness and the morphology of the machined surface.

Three autonomous communities have been the ones that, in the 2022-2023 season, anticipated the document approved by the Public Health Commission, recommending influenza vaccination for all children aged 6 to 59 months. The main objective of this work is to evaluate the attitude of healthcare professionals towards the first universal vaccination campaign in our region, as well as the acceptability of the vaccines used and the attitude towards the piloting of school vaccination. Cross-sectional, survey-based, descriptive study. All healthcare professionals involved in the campaign were invited to participate. The 91.9% of surveyed professionals thought that flu vaccination from 6 to 59 months was important or very important. 89.8% had previous experience regarding the intramuscular vaccine. The professionals valued the intranasal vaccine significantly more positively; however, there were no differences when asking for each of the vaccines without comparison. The inhaled vaccine was preferred by 97.5% for the following campaign. Piloted school vaccination showed 75% acceptance. The inhaled vaccine was preferred by most professionals and the piloted school vaccination was highly accepted, and independently associated to the importance of vaccination as considered by physicians, being a medical doctor, and participation in the pilot program.

The increasingly common occurrence of antibiotic-resistant bacteria has become an urgent public health issue. There are currently some infections without any effective treatment, which require new therapeutic strategies. An attractive alternative is the design of compounds capable of disrupting bacterial communication known as quorum sensing (QS). In gram-negative bacteria, such communication is regulated by acyl-homoserine lactones (AHLs). QS allows bacteria to proliferate before expressing virulence factors. Our group previously reported that hexyloxy phenyl imidazoline (9) demonstrated 71% inhibitory activity of QS at 100 µM (IC50=90.9 µM) in Chomobacterium violaceum, a gram-negative bacterium. The aim of the present study was to take 9 as a lead compound to design and synthesize three 2-imidazolines (13-15) and three 2-oxazolines (16-18), to be evaluated as quorum sensing inhibitors on C. violaceum CV026. We were looking for compounds with a higher affinity towards the Cvi receptor of this bacterium and the ability to inhibit QS. The binding mode of the test compounds on the Cvi receptor was explored with docking studies and molecular dynamics. It was found that 8-pentyloxyphenyl-2-imidazoline 13 reduced the production of violacein (IC50=56.38 µM) without affecting bacterial growth, suggesting inhibition of quorum sensing. Indeed, compound 13 is apparently one of the best QS inhibitors known to date. Molecular docking revealed the affinity of compound 13 for the orthosteric site of the N-hexanoyl homoserine lactone (C₆-AHL) on the CviR protein. Ten aminoacid residues in the active site of C₆-AHL interacted with 13, and 7 of these are the same as those interacting with AHL. Contrarily, 8-octyloxyphenyl-2-imidazoline 14, 8-decyloxyphenyl-2-imidazoline 15 and 9-decyloxyphenyl-2-oxazoline 18 bound only to an allosteric site and thus did not compete with C₆-AHL for the orthosteric site.

Innovative tissue engineering biomimetic hydrogels based on hydrophilic polymers have been investigated for their physical and mechanical properties. 5% to 25% by volume loading PHEMA-nanosilica glassy hybrid samples were equilibrated at 37°C in aqueous physiological isotonic and hypotonic saline solutions (0.15 and 0.05 M NaCl) simulating two limiting possible compositions of physiological extracellular fluids. The glassy and hydrated hybrid materials were characterized both for dynamo-mechanical properties and equilibrium absorptions in the two physiological-like aqueous solutions. Mechanical and the morphological modifications occurring in the samples have been described. The 5% volume nanosilica loading hybrid nanocomposite composition showed mechanical characteristics in the dry and hydrated states that were comparable to those of cortical bone and articular cartilage, respectively, and then chosen for further sorption kinetics characterization. Sorption and swelling kinetics were monitored up to equilibrium. Changes in water activities and osmotic pressures in the water-hybrid systems equilibrated at the two limiting solute molarities of the physiological solutions have been related to the observed anomalous sorption modes using the Flory-Huggins interaction parameter approach. The bulk modulus of the dry and glassy PHEMA-5% nanosilica hybrid at 37°C has been observed to be comparable with the values of the osmotic pressures generated from the sorption of isotonic and hypotonic solutions. The anomalous sorption modes and swelling rates are coherent with the difference between osmotic swelling pressures and hybrid glassy nano-composite bulk modulus: the lower the differences the higher the swelling rate and equilibrium solution uptakes. Bone tissue engineering benefits of use of tuneable biomimetic scaffold biomaterials that can be “designed” to act as biocompatible and biomechanically active hybrid interfaces are discussed.

This paper presents the mathematical modeling for designing a 10[kW] DC-AC inverter system from 48 [V] DC to 120 V ACrms, considering its non-linear operation, allowing to obtain a detailed simulation to assess the proposed fuzzy PI control (with anti-windup action) and its optimal operation. The performance assessment of the converter was carried out with the discrete treatment of the voltage and current signals using spectral analysis, filtering considerations, and evaluation of limit cycle technique to determine the system's stability. The main results showed that THD at the filter output (transformer and capacitor) was around 0.0322% and 0.0632% at nominal load in open loop and closed loop, respectively. The inverter system presented more sensitivity in the current signal with a ripple at 120 [Hz] of 2.02% and at 5000 [Hz] of 10.62% (at nominal load). However, when the system operates in a closed loop, the current ripple at 120 [Hz] is 2.38% and at 5000 [Hz] is 10.62%.

Large datasets play a crucial role in the progression of surgical robotics, facilitating advancements in the fields of surgical task recognition and automation. Moreover, public datasets enable the comparative analysis of various algorithms and methodologies, thereby assessing their effectiveness and performance. The ROSMA (Robotics Surgical Maneuvers) dataset provides 206 trials of common surgical training tasks performed with the da Vinci Research Kit (dVRK). In this work, we extend ROSMA dataset with two annotated subsets: ROSMAT24, which contains bounding box annotations for instrument detection, and ROSMAG40, which contains high and low level gesture annotations. We propose an annotation method that provides independent labels for the right-handed tool and the left-handed tool. For instrument identification, we validate our proposal with a YOLOv4 model in two experimental scenarios. We demonstrate the generalization capabilities of the network to detect instruments in unseen scenarios. For gesture segmentation, we propose two label categories: high-level annotations that describe gestures at a maneuvers level, and low-level annotations that describe gestures at a fine-grain level. To validate this proposal, we have designed a recurrent neural network based on a bidirectional long-short term memory layer. We present results for four cross-validation experimental setups, reaching up to a 77.35% mAP.

The proper regulation of RNA processing is critical for muscle development and the fine-tuning of contractile ability between muscle fiber-types. RNA binding proteins (RBPs) regulate the diverse steps in RNA processing including alternative splicing, which generates fiber-type specific isoforms of structural proteins that confer contractile sarcomeres with distinct biomechanical properties. Alternative splicing is disrupted in muscle diseases such as myotonic dystrophy and dilated cardiomyopathy, and is altered after intense exercise as well as with aging. It is therefore important to understand splicing and RBP function, but currently only a small fraction of the hundreds of annotated RBPs expressed in muscle have been characterized. Here we demonstrate the utility of Drosophila as a genetic model system to investigate basic developmental mechanisms of RBP function in myogenesis. We find that RBPs exhibit dynamic temporal and fiber-type specific expression patterns in mRNA-Seq data and display muscle-specific phenotypes. We performed knockdown with 105 RNAi hairpins targeting 35 RBPs and report associated lethality, flight, myofiber and sarcomere defects, including flight muscle phenotypes for Doa, Rm62, mub, mbl, sbr, and clu. Interestingly, knockdown phenotypes of spliceosome components, as highlighted by phenotypes for A-complex components SF1 and Hrb87F (hnRNPA1), revealed level- and temporal-dependent myofibril defects. We further show that splicing mediated by SF1 and Hrb87F is necessary for Z-disc stability and proper myofibril development, and strong knockdown of either gene results in impaired localization of Kettin to the Z-disc. Our results expand the number of RBPs with a described phenotype in muscle and underscore the diversity in myofibril and transcriptomic phenotypes associated with splicing defects. Drosophila is thus a useful model to gain disease-relevant insight into cellular and molecular phenotypes observed when expression levels of splicing factors, spliceosome components and splicing dynamics are altered.