Alzheimer’s disease (AD) poses a significant public health challenge due to its irreversible and progressive nature while lack of a cure. As a potential strategy to combat AD, its prevention becomes increasingly attractive. Mild Cognitive Impairment due to AD (MCI-AD) represents a critical transitional stage between normal age-related cognitive decline and more severe AD conditions, occurring just before dementia onset. Unfortunately, there is currently no established animal model that accurately recapitulates MCI-AD characteristics. While many laboratories have traditionally used normally aged wild-type animals as experimental models, this approach falls short in representing the inherently worse state of MCI-AD compared to normal aging. To address this gap, we introduce an animal model—a transgenic mouse line with genetic inactivation of G protein-coupled receptor kinase-5 (GRK5), commonly known as the GRK5 knockout (GRK5KO) mouse. These GRK5KO mice exhibit amnesia, cognitive deficits, increased β-amyloid levels, neurofibrillary tangle (NFT) immunopositive axonopathy, and hippocampal neurodegenerative changes. Importantly, these pathological alterations predominantly impact the entorhinal, transentorhinal, and hippocampal cortices, aligning with human MCI-AD criteria and Braak stage II of human AD progression. Notably, female GRK5KO mice show approximately 2.5 times more NFT-positive axonopathy than males, mirroring the higher prevalence of AD cases in women. Collectively, existing data strongly supports the GRK5KO mouse as a qualified animal model for studying MCI-AD.

The development of photocatalysts with a wide spectral response and effective carrier separation capability is essential for the green degradation of tetracycline. In this work, a magnetic recyclable Z-scheme ZnO/ZnFe2O4 heterojunction (ZZF) was successfully constructed by the solid phase method using MIL-88A(Fe)@Zn as the precursor. Appropriate band gap width and Z-scheme charge transfer mechanism make ZZF have excellent visible light absorption performance, efficient charge separation and strong redox ability. Under visible light irradiation, the degradation efficiency of TCH for optimal sample ZZF2 can reach 86.3 % within 75 min in deionized water, and achieve 92.9 % within 60 min in tap water, which exhibits superior stability and reusability after five cycles. Moreover, the catalyst in the water can be conveniently recovered by magnetic force. After visible light irradiation for 70 minutes, the temperature of the reaction system increased by 21.9 °C. Its degradation constant (35.53×10-3 min-1) increases 5.1 times that at room temperature (6.95×10-3 min-1). Thermal energy perfects the kinetic driving force of the reactants and promotes carrier migration to produce more •O2- and •OH. This work provides a potential candidate and inspires the design of photocatalyst for tetracycline hydrochloride degradation.

We assume that poetic devices have an implicit goal: producing an overall sound scheme that will induce the reader to associate intended and expressed meaning to the sound of the poem. Sounds may be organized into categories and assigned presumed meaning as suggested by traditional literary studies. In my work, I have extracted automatically the sound grids of all the sonnets by William Shakespeare and have combined them with the themes expressed by their contents. In a first experiment I have computed lexically and semantically based sentiment analysis obtaining an 80% of agreement. In a second experiment sentiment analysis has been substituted by Appraisal Theory thus obtaining a more fine-grained interpretation which in some cases contradicts the first one. The computation for the second poet - regarded by many critics the best of last century - includes both vowels and consonants. In addition, it combines automatic semantically and lexically based sentiment analysis with sound grids. The results produce visual maps that clearly separate poems into three clusters: negative harmony, positive harmony and disharmony where the latter instantiates the need by the poet to encompass the opposites in a desperate attempt to reconcile them.

Quasistatic nanoindentation is a proven tool that provides information on the micromechanical behavior of wood cell walls. However, quasistatic tests cannot probe the time-dependent mechanical behavior shown by wood. Nanoindentation dynamic mechanical analysis (nanoDMA) can mesaure the viscoelastic properties of wood cell walls. This research aimed to study the quasistatic and viscoelastic properties of individual radiata pine wood (Pinus radiata D. Don) cell wall layers. To minimize variability and retrieve both properties at the same locations, a load function composed of a multiload-quasistatic function followed by dynamic reference frequency segments was developed. Nanoindentations were then performed on the S2 layer and compound corner middle lamella (CCML) of unembedded latewood cells. Because the S2 layer is anisotropic, both transverse and longitudinal-tangential wood planes were studied. In the transverse plane, the average results of the quasistatic elastic moduli (Es) for the S2 layer and CCML were 15.7 GPa and 4.6 GPa, respectively. In the longitudinal-tangential plane, the E_s was 3.9 GPa. In the transverse section, the hardness (H) of the S2 layer and CCML were 331 MPa and 277 MPa, respectively, and in the longitudinal-tangential section H was 244 MPa. To acquire the viscoelastic properties, measurements were made over more than three decades of frequency. An increase of the storage modulus (E'), and a reduction of the loss modulus (E'') and loss factor (tan⁡ δ ) as frequency increased were found in both wood orientations. The quasi-static and dynamic indentations equivalent at 0.1 Hz showed similar values for Es and E’. This study contributes to our knowledge of wood cell wall micromechanical properties.

Drones have been used in a variety of scenarios such as atmospheric monitoring, fire rescue, agricultural irrigation, etc., in which accurate environmental perception is of crucial importance for both decision-making and control. Among the drone sensors, the RGB camera is indispensable for capturing rich visual information for vehicle navigation but encounters a grand challenge in high-dynamic-range scenes that occur frequently in real applications. Specifically, the recorded frames suffer from under-exposure and over-exposure simultaneously and degenerate the successive vision tasks. To solve the problem, we take object tracking as an example and leverage the superior response of event cameras over a large intensity range to propose an event-assisted object tracking algorithm that can achieve reliable tracking under large intensity variations. Specifically, we propose to pursue feature matching from dense event signals, and based on which to (i) design a UNet-based image enhancement algorithm to balance the RGB intensity with the help of neighboring frames in the time domain, and then (ii) construct a dual-input tracking model to track the moving objects from intensity balanced RGB video and event sequence. The proposed approach is comprehensively validated in both simulation and real experiments.

Synthesis of activated carbon from waste biomass is of current interest towards sustainability. The properties of biomass derived activated carbon largely depends on the carbonization process. This study reports preparing extremel high surface area mesoporous activated carbon from hemp bast fibre using hydrothermal processing. Processing in hot water (390-500^oC), then activation using KOH and NaOH was investigated at different loading ratios. The described approach was found to enhance the mesoporosity (centered at 3.0 to 4.5 nm) of the hemp derived activated carbon (HAC) from activation (confirmed by BJH pore size distribution and TEM imaging). BET results showed that the product has an extremely high surface area (2425 m²/g) while the surface functional groups (-OH, COOH, C=C/C-C) were confirmed and quantified by XPS and FTIR results. Increasing KOH concentration was found to enhance the surface area with an optimum biochar to KOH ratio of 1:3. The crystallite domain size of HAC was determined using Raman spectroscopy of different wavelengths. The procedure described in this study is an environmentally friendly scalable route for the mass production of activated carbon using hemp fiber.

Multi-level direct networks fueled by the evolving technology of active optical cables and increasing pin-bandwidth achieve reduced diameters and cost, with high-radix switches. These networks, like Dragonfly, are becoming the preferred aspirants for extreme high-performance parallel machines such as exa-scale computing. In this paper, we introduce a Hyper Z-Tree topology, which deploys the Z-Tree, a variant of fat-tree, as a computing node of a Generalized Hypercube (GHC) configuration. The resulting configuration provides higher bisection bandwidth, lower latency for some applications and higher throughput. Furthermore, the levels of the fat tree offer several path diversities across the GHC dimensions, hence conceding a more fault tolerant architecture. To profit from these path diversities, we propose two adaptive routing algorithms, which are extensions to the routing algorithm suggested in HyperX topology. These two algorithms exhibit better latencies and throughput than the HyperX.

A biofilm is any syntrophic consortium of microorganisms in which cells adhere to one another and, in some cases, to a surface. These adherent cells become encased in a slimy extracellular matrix made up of extracellular polymeric substances (EPSs). Until now, the use of commercial disinfectants remains the main strategy to control biofilm-mediated problems. This mini review summarizes common antibiofilm mode of actions taken by disinfectants and how water channels in microbial biofilms contribute to disinfectant resistance.

We consider fractional integral operators $(I-T)^d, d \in (-1,1)$ acting on functions $g: \mathbb{Z}^{\nu} \to \mathbb{R}, \nu \ge 1 $, where $T $ is the transition operator of a random walk on $\mathbb{Z}^{\nu}$. We obtain sufficient and necessary conditions for the existence, invertibility and square summability of kernels $\tau (\mathbf{s}; d), \mathmb{s} \in \mathbb{Z}^{\nu}$ of $(I-T)^d $. Asymptotic behavior of $\tau (\mathbf{s}; d)$ as $|\mathbf{s}| \to \infty$ is identified following local limit theorem for random walk. A class of fractionally integrated random fields $X$ on $\mathbb{Z}^{\nu}$ solving the difference equation $(I-T)^d X = \varepsilon$ with white noise on the right-hand side is discussed, and their scaling limits. Several examples including fractional lattice Laplace and heat operators are studied in detail.

The Hubble parameter H(z), as a function of redshift, is modified by the presence of a new term originated from the extrinsic curvature in an embedded space-time. Assuming an asymptotic expansion factor $a\sim 0$ or, equivalently $z\rightarrow \infty$, it is obtained a nearly resemblance of the present model ($\beta$-model) with quintessence $w$CDM model with $H(z)\sim H_{wCDM}(z)$ at background level. In conjunction with $\Lambda$CDM, we test the models using a pack of recent datasets like that of the ``Gold 2018'' growth data, the best-fit Planck2018/$\Lambda$CDM parameters on the Cosmic Microwave Background (CMB), the Baryon Acoustic Oscillations (BAO) measurements, the Pantheon Supernovae type Ia and the Hubble parameter data with redshift ranging from $0.01 < z < 2.3$. Performing the Akaike Information Criterion (AIC) to ascertain the statistical viability of the model from Jeffreys' scale, we apply a joint likelihood analysis to the data with the Markov Chain Monte Carlo (MCMC) method. We find that the present model is in very good agreement with observations with a close statistical equivalence with the $\Lambda$CDM and $w$CDM cosmologies at 1-$\sigma$ level. We also show that a mild alleviation of the $\sigma$ tension between the growth amplitude factor and the matter content $(\sigma_8$-$\Omega_m)$ of the observations from CMB and Large Scale Structure (LSS) probes. A comparison of the aforementioned full pack of data in MCMC chains is made with the resulting MCMC from Pantheon SNIa+$H(z)$ in order to analyse the sensitivity of the models and how they respond to a cosmography analysis on the evolution of $H(z)$ and the deceleration parameter $q(z)$. In this sense, we find that only the $\beta$-model can be unaffected to the variations of the previous datasets due to its several minima in the likelihood (degeneracies) of the related parameters with an overall percentage relative difference only up to 4$\%$.

For Interferometry Synthetic Aperture Radar (InSAR), the normal baseline is one of the main factors that affect the accuracy of the ground elevation. For Gaofen-3 (GF-3) InSAR processing, the poor accuracy of the real-time orbit determination resulting in a large baseline error, leads to the modulation error in azimuth and the slope error in range for timely Digital Elevation Model (DEM) generation. In order to address this problem, a baseline estimation method based on external DEM is proposed in this paper. Firstly, according to the characteristic of the real-time orbit of GF-3 images, orbit fitting is executed to remove the non-linear error factor. Secondly, the height errors are obtained in slant-range plane between Shuttle Radar Topography Mission (SRTM) DEM and the GF-3 generated DEM after orbit fitting. At the same time, the height errors are used to estimate the baseline error which has a linear variation. In this way, the orbit error can be calibrated by the estimated baseline error. Finally, DEM generation is performed by using the modified baseline and orbit. This procedure is implemented iteratively to achieve a higher accuracy DEM. Based on the results of GF-3 interferometric SAR data for Hebei, the effectiveness of the proposed algorithm is verified and the accuracy of GF-3 real-time DEM products can be improved extensively.

It is the aim of this article to introduce a concise notation that is be able to capture the most important dimensions of sexuality and thus facilitate discussions. Moreover, the major three dimensions - sex, gender, and sexual orientation - lead to a straightforward classification which motivates the quest for stringent explanatory models, some of which are also discussed.

We develop new theory from a broad case-study approach to explore a better understanding of what constitutes knowledge and its value as identifiable to human-machine teams. From past research, this trail of exploration will lead to these initial questions: What is the value of debate in the furtherance of knowledge? Will machines with AI be able to contribute to a debate if we humans cannot define it or determine its value sufficiently for a machine’s understanding, contribution, exploration and identification? Like humans, as teammates, machines must be able to determine with AI what constitutes the usable knowledge that contributes to a team’s success in the field (e.g., testing "knowledge" in the field, identifying new knowledge, using knowledge to develop innovation) or its failure (viz., trouble shooting; identifying weaknesses; discovering vulnerabilities, hiding by deception). It matters not whether a debate is public, private or unexpressed by an individual human or machine agent alone; we speculate in this exploration that the process advances the science of autonomous human-machine teams and assists in interpretable machine learning. We conclude with questions and a speculation: How does a human become aware or express its awareness of knowledge? Can a machine be as expressive as its human teammates? And how does a human-machine teammate become aware that its teammates possess sufficient knowledge to perform a task? We speculate that the structure of “knowledge," once found, is resistant to alternatives (i.e., it is ordered); that its functional utility is generalizable; and that its applications are multifaceted (akin to maximum entropy production). The complexity of the team is taken into consideration in our search for knowledge, which can also be used as an information metric.

Establishment of protected areas (PAs) is one of the key global conservation strategies that currently cover approximately 15% of the earth’s land surface. Globally, PA networks are designed to curb the growing anthropogenic pressures in areas with high biological diversity. Despite the importance of PAs in conserving the vanishing biodiversity and unique habitats, many of them are in critical condition due to poor governance thus functioning below the expected level. Moreover, in many developing countries, the PA coverage is below the global standard. Recognizing their contemporary role in conservation, governments have recently agreed to expand the global PA coverage to 17% by the year 2020 (Aichi target 11). This book with eight chapters from different regions of the world provides an overview of the PAs governance, institutional mechanisms, conservation benefits, limitations and challenges associated with their respective policy discourse, integrated management, and functional attributes. Protected areas expect to to play an important role in the long rn in conservation and protection of biodiversity and ecosystems particularly in countries where population pressure and habitat loss are high. Regular intervention, political commitment, and effective governance are essential for the sustainability of PAs across the world. Here, we also attempted to shed some light on future development clues for the sustainable management and monitoring of PAs worldwide.

Public key encryption methods are often used to create a digital signature, and where Bob has a public key and a private key. In order to prove his identity, he will encrypt something related to the message with his private key, and which can then be checked with his public key. The main current methods of public-key encryption include RSA and ECC (Elliptic Curve Cryptography), and which involve computationally difficult operations. But these operations have not been proven to be hard in an era of quantum computers. One well-known hard problem is the solving of quadratic equations with $m$ equations with $n$ variables. This is a known NP-hard problem, even in a world of quantum computers. These can be used as post-quantum signature schemes and which involve multivariate equations. In order to understand these methods, this paper outlines a simple example of implementing the oil and vinegar method, and where we have a number of unknown oil variables and a number of known vinegar variables, and where the vinegar variables help convert the hard problem into an easy one.

Hubble diagrams are examined for SN1a supernovae in the redshift range z = 0.01–1.3 and for gamma ray bursts in the range z = 0.034–8.1. It is shown that in the low redshift range, the Hubble diagram shows an innate equivocality between the ΛCDM and the tired light model. This means that the strong agreement between the z/µ data, calculated with the parameters of the ΛCDM model, and the experimentally measured z/µ values cannot be considered as definite evidence for the expansion hypothesis. The exponential function , which is characteristic of the tired light redshift mechanism, fits the data with similarly high accuracy. Hence, on the premise of low redshift data, a decision for or against either model is completely arbitrary. The Hubble diagram for high redshift gamma ray bursts shows poor agreement with the ΛCDM model, but concurs with the exponential energy decay following from the tired light redshift hypothesis.

Analyses of the Hubble diagrams are presented for SN1a supernovae and gamma ray bursts in the redshift ranges z = 0.01–1.3 and 0.034–8.1, respectively. Data are presented on the typical z/μ scale and also on the less common yet increasingly sensitive photon flight time t/(z+1) scale. The primary conclusion is that on the basis of the presently accessible data in the redshift range z = 0.01–8.1, the slope of the Hubble diagram is, or is extremely close to, exponential.

Heat enhancement is a topic of great interest nowadays due to its different application in industries. Porous material also known as metallic foam plays a major role in heat enhancement at the expenses of pressure drop. Flow in channels demonstrate the usefulness of this technology in heat extraction. In our current study, a porous strip attached to the channels walls is proposed as an alternative for heat enhancement. The thickness of the porous strip was varied for different Reynolds number. By maintaining laminar regime and using water as fluid, we determined an optimum thickness of porous material leading to the highest performance evaluation criterion. In our current study with the aspect ratio being the porous strip thickness over the channel width, an aspect ratio of 0.2 is found to be the alternative. A 40% increase in heat enhancement is detected in the presence of porous strip when compared to a clear channel case for a Reynolds number equal to 200 and improve further as the Reynolds number increase accordingly.

Background—In 2011, Miller and Goldman published a study in Human and Experimental Toxicology that found a counterintuitive, positive correlation, r = 0.70 (r² = 0.49, p < .0001), demonstrating that as nations require more vaccine doses for their infants, infant mortality rates (IMRs) tend to increase (worsen). The dataset (n = 30) included the United States, a nation that required the most vaccines for their infants, and all nations with better IMRs than the United States. Dr. E. Bailey, a professor at BYU, and her students, recently read the Miller-Goldman study and found it "troublesome that this manuscript is in the top 5% of all research outputs" and falsely claimed that its findings were due to "inappropriate data exclusion," i.e., failure to analyze the "full dataset" of all 185 nations. The "Bailey reanalysis," titled Infant vaccination does not predict increased infant mortality rate: correcting past misinformation, was posted to the medRxiv preprint server on September 10, 2021 (version 1) and October 5, 2021 (version 3) and Europe PMC preprint server on September 10, 2021. Objective—This present study examines the various claims postulated by the Bailey reanalysis and assesses the robustness of their methodology, analyses, and reported results and conclusions. Methods—Data discussed in this paper are based on the previously mentioned study by Miller and Goldman and the Bailey reanalysis. Results—Linear regression analysis of IMR and the number of vaccine doses for each country yield a statistically significant positive correlation of r = 0.70 (p < .0001) for the top nations (n = 30) chosen by Miller-Goldman and r = 0.16 (p < .04) for the "entire dataset" chosen by Bailey et al (n = 185). Bailey also conducted linear regression analyses (for the year 2019) of IMRs as a function of vaccination rates for each of eight different vaccines and reported statistically significant inverse correlations for 7 of 8 vaccines over the entire range of vaccination rates. However, Miller and Goldman reanalyzed the Bailey analyses for nations with vaccination rates below 60% and found no statistically significant correlation for six vaccines (DPT, Hib, hepatitis B, polio, rotavirus, and measles) and statistically significant positive correlations for tuberculosis (r = 0.8, p < .005) and pneumococcal (r = 0.6 p < .023) vaccines. Conclusions—Bailey’s reanalysis corroborates a statistically significant positive correlation originally reported by Miller and Goldman. However, Bailey’s reported correlation (r = +0.16, p < .04) is small, likely due to poor methodology (failing to account for covariates, i.e., disparities among numerous socioeconomic factors that add uncertainty to their conclusion). The r-value reported by the Bailey reanalysis demonstrates an effect size that is about one-fourth (0.16/0.70) that reported by Miller-Goldman—underscoring how critically important it is for Bailey's reanalysis to eliminate confounding variables. Moreover, Bailey’s linear regression analyses of IMR as a function of vaccination rates for each of eight different vaccines demonstrate that some countries with low vaccination rates have low IMRs, while other countries with high vaccination rates have high IMRs. Rather than supporting a strong inverse correlation, the Bailey reanalysis demonstrates high vaccination rates are neither necessary nor sufficient to cause low IMR.

The companion paper (Rice 2020) found that the centromeric repeats of the Western European house mouse (Mus musculus domesticus) have unusual structure: i) despite moderate pairwise sequence divergence (average = 5.9%), no monomer sequence was common and many hundreds of monomer sequences were observed, ii) local sequence divergence among neighboring monomers was nearly as high as genome-wide divergence, and iii) matching sequences were rare between side-by-side monomers. Here I integrate information from many published studies to formulate a hypothesis for the evolution of this structure. Non-matching sequences of neighboring centromeric monomers is hypothesized to be selectively favored in the context of molecular drive because it reduces the rate of monomer deletion during repair of double strand breaks (DSBs) via the Single Strand Annealing (SSA) pathway. The foundation for the hypothesis is the observation that centromeres of most populations of M. m. domestics reside close to the telomere, i.e., all their chromosomes are telocentrics. This proximity influences repair of centromeric DSBs because it places at least part of the centromere within the Telomere-Affected Repair Region (TARR; a location with increased concentrations of the shelterin-complex proteins that bind telomeres, especially TRF2). Shelterin proteins increase the level of 5’→3’ end resection at DSBs and thereby: i) decrease the frequency of repair via the c- NHEJ pathway, and ii) increase the frequency of homology-directed repair (HD-repair) –including the SSA repair pathway. It is hypothesized that certain ‘trigger’ events (e.g., sub-telomeric deletions) occur in local populations that increase the influence of TARR on the centromere. This increase elevates the occurrence of SSA repair of centromeric DSBs to a level that causes centromeres to begin to gradually shrink. Chronic shrinkage leads to coevolution between centromere size and karyotype number. Once centromeres shrink to a size below a critical minimum (that causes substantially reduced kinetochore size), fusions between non- homologous telocentrics with undersized centromeres produces metacentrics with an expanded centromere size (and a corresponding ‘quantum-jump’ in kinetochore size). These metacentrics: i) accumulate to fixation because they are favored by centromere drive, and ii) are released from the influence of TARR and thereby gradually recover larger centromere size. Fission of metacentrics with enlarged centromeres can next plausibly regenerate pairs of telocentrics with sufficiently large centromeres (which recruit normal-sized kinetochores) to be favored by centromere drive and accumulate to fixation. This fixation completes a cycle of coevolution within genomes that oscillate between two extremes: i) high karyotype number (2N = 40; all telocentrics) with larger centromeres, and ii) low karyotype number (2N << 40; mainly metacentrics) with initially small centromeres that gradually increase in size.

When animals evolve sufficient intelligence and dexterity to be able to learn to fabricate utility products (UPs) like tools, the UP's they produce become part of an induced-reproduction system that intrinsically shares many life-like traits with biological organisms, including genome-like fabrication and operation information that is physically-encoded in the animal fabricator’s neural networks. When this set of life- like traits includes a sufficient capacity for system-improving cultural evolution (UP-evolvability), the UPs become ‘para-alive’, i.e., nearly alive, or a form of non-biological UP-paralife that is equivalent to the life- status of biological viruses, plasmids, and transposons. In the companion paper I focus on the evolution of UP-paralife in the context of modern, language-capable humans and its predicted evolution going forward in time (Rice 2022). Here I look backward in time and focus on the origin of UP-paralife and its subsequent coevolution with human intelligence. I begin by determining the pathways leading to the evolution of large brains in the rare lineages of biological life that have sufficient intelligence to learn to fabricate tools –a critical first step in the evolution of UP-paralife. The simplest forms of these learning- based UPs, made by species like chimpanzees and New Caledonian crows, represent only proto-UP- paralife because they lack sufficient UP-evolvability. Expanded UP-evolvability required a combination of three attributes that enabled continuous niche-expansion of the animal fabricator via a new and advanced form of UP-mediated teamwork (TW): i) self-domestication that facilitated TW among low-related individuals, ii) learned volitional words (protolanguage) that represent ephemeral UPs that coordinate TW, and iii) learned fabrication of simple flaked-stone tools with cutting and chopping capabilities (a UP to make other structural UPs) that expanded teammate phenotypes and TW capabilities. This specific triad of attributes is synergistic because each one acts as a TW-enhancer that can gradually erode different components of the three major constraints on TW operation and expansion: too much selfishness, insufficient coordination signals, and insufficient physical traits of teammates. The increase in UP- evolvability was transformative and marked the origin of UP-paralife and the initiation of coevolution between UP-paralife (cultural evolution) and the intelligence of its hominin/human symbiont (genetic evolution) that fostered 2.5 million years of: i) continuous brain size increase and niche-expansion within the genus Homo, and ii) parallel advances in the diversity, complexity and uses of UP-paralife. This coevolution also fostered evolutionary expansion of word-based communication, and eventually language, that acted in a catalyst-like manner to facilitate the evolution of increasingly complex forms of imagination, reasoning, mentalizing, and UP-generating technology. I next focus on the evolution of creativity in the human lineage –in the form of divergent thinking and creative imagination. I conclude that the evolution of this advanced cognitive feature required a preadaptation of sufficient intelligence and is the component of human cognition that was the major causal factor generating the greatly expanded diversity and complexity of UP-paralife currently associated with modern humans. Lastly, I apply my findings to the issue of the prevalence of extraterrestrial intelligent life. I conclude that any exoplanets with detected chemical life will very rarely (e.g., probability ~10-5 for a planet closely matching Earth’s characteristics) have evolved intelligence equalling or exceeding that of humans.

Centromeres are among the fastest evolving genomic regions in a diverse array of organisms. The evolutionary process driving this rapid evolution has not been unambiguously established. Here I integrate diverse information to motivate a model in which centromeres evolve rapidly because of their intrinsic molecular phenotype: they tightly bind centromeric proteins throughout the cell cycle. DNA-bound proteins have been shown to cause stalling and collapse of DNA replication forks in many genomic regions, including centromeres. Collapsed replication forks generate one-sided double strand breaks (DSBs) that are repaired by the Break-Induced Repair (BIR) pathway. Here I show why this repair is expected to generate tandem repeat structure and three key features at centromeres: i) increased nucleotide substitution mutation rates, ii) out-of- register re-initiation of replication that leads to indels spanning one or more repeat units, and iii) elevated rates of large and small transpositions within centromeres and between genomic regions. These phenotypes lead to: i) a rapid rate of nucleotide substitutions within a clade of centromeric sequences, ii) continual turnover of monomers within centromeres that fosters molecular-drift and molecular-drive, and iii) recurrent quantum leaps in centromere sequence due to the formation of mosaic monomers and new sequences transposed into non-homologous centromeres. These features are plausibly the major reason centromeres evolve so rapidly. I also speculate on how the DNA sequence of centromeres might perpetually coevolve with the protein sequence of histone CENH3 –the major epigenetic mark of centromeres.

The fundamental mechanism underlying negative-ion catalysis involves bond-strength breaking in the transition state (TS). Doubly-charged atomic/molecular anions are proposed as novel dynamic tunable catalysts and demonstrated in water oxidation to peroxide. Density Functional Theory TS calculations have found tunable energy activation barrier reduction ranging from 0.030 eV to 2.070eV, with Si²ˉ, Pu²ˉ, Pa²ˉ and Sn²ˉ the best catalysts; the radioactive elements usher in new application opportunities. C₆₀²ˉ reduces significantly the standard C₆₀ˉ TS energy barrier while graphene increases it, behaving like cationic systems. Rank-ordered catalysts according to their reaction barrier reduction efficiency, variation across charge states and systems reveal their tunable and wide applications, ranging from water purification to biocompatible anti-viral and anti-bacterial sanitation systems.

Here I describe an overlooked form of non-biological paralife (i.e., near-life) that has been evolving on Earth for millions of years, and is currently in the final stages of transitioning into a new form of life. Any consideration of non-biological life or paralife is complicated by the fact that there is no consensus among biologists for the definition of life. This ambiguity has caused disagreement about whether subcellular reproduction systems like viruses are a form of life, despite having genomes, mutations, heritable phenotypes and system-improving evolution. To resolve this problem, I develop a definition of life that is entirely functional and independent of any of the structural idiosyncrasies of biological life on Earth: an order-generating system controlled by internally-encoded information that perpetuates itself by functioning to counteract its entropic decay. Using this definition, subcellular transposons, plasmids, and viruses are paralife because they match the definition of life in all ways except that they induce their order-generating functioning by a living host rather through their own self-sustaining production system. Using this functional definition of life, I show that utility- products (UPs) like fabricated hand tools are part of induced-reproduction systems that have features equivalent to biological genomes, mutations, heritable phenotypes, and a process of system-improving evolution. The perceived benefit of utility-products causes them to induce their reproduction by a biological life-form (humans). For these reasons, human utility products are functionally just as close to being a form of life as subcellular transposons, plasmids, and viruses, i.e., they are Utility-Product paralife (UP-parlife). I also show that some forms of UP-paralife are currently evolving into mechanical life that is capable of both self- sustaining reproduction and system-improving evolution without outside assistance. This transition requires the development of a high level of factory and/or UP automation and artificial intelligence (AI) that is capable of complex reasoning, imagination and creativity. Finally, I consider the influence of UP-life and UP-paralife on the development of the level of structural complexity in the universe, and I briefly speculate about how these non-biological forms of life and paralife will influence the expansion of scientific knowledge about the universe.

Abstract: This article reports the results of an ecological study of cancer incidence rates by state in the US for the period 2016-2020. The goals of this study were to determine the extent to which solar UVB doses still reduced cancer risk compared to findings reported in 2006 for cancer mortality rates for the periods 1950–1969 and 1970-1794 as well as cancer incidence rates for the period 1998–2002 and to determine which factors were recently associated with cancer risk. The cancer data for non-Hispanic white (European American) men and women were obtained from the Centers for Disease Control and Prevention. Indices were obtained for solar UVB at the surface for July 1992, and alcohol consumption, and diabetes and obesity prevalence near the 2016–2020 period. Lung cancer incidence rates were also used in the analyses as a surrogate for smoking, diet, and air pollution. The cancers for which solar UVB is significantly associated with reduced incidence are bladder, brain (males), breast, corpus uteri, esophageal, gastric, non-Hodgkin’s lymphoma, pancreatic, and renal cancer. Lung cancer was significantly associated with colorectal, laryngeal, and renal cancer. Diabetes was also significantly associated with breast, liver, and lung cancer. Obesity prevalence was significantly associated with breast, colorectal and renal cancer. Alcohol consumption was associated with bladder and esophageal cancer. Thus diet has become a very important driver of cancer incidence rates. The role of solar UVB in reducing risk of cancer has been reduced due to people spending less time outdoors, wearing sunscreen that blocks UVB but not UVA radiation, and population increases in overweight and obesity, which lowers 25-hydroxyvitamin D concentrations and generates systemic inflammation, a risk factor for cancer. The dietary approach that would reduce the risk of diabetes, obesity, lung cancer, and, therefore cancer, would be one based mostly on whole-plants and restrictions on red and processed meats and ultraprocessed foods. Solar UVB exposure for a few minutes before applying sunscreen and taking vitamin D supplements would also help reduce risk of cancer.Keywords: alcohol consumption; cancer incidence;

Rapid SARS-CoV-2 self-tests have the potential to expand access to COVID-19 testing and improve community-level case detection, particularly in resource-constrained countries such as Kenya. However, prior to their introduction, their acceptability must be assessed. This qualitative study explored key decision-takers’ values towards SARS-CoV-2 self-testing in Kenya. Healthcare workers, representatives of civil society, and potential implementors from Mombasa and Taita-Taveta were selected as decision-takers. Semi-structured interviews and focus group discussions were used to collect data on their values towards self-testing. A thematic analysis approach was applied. Most informants considered that the Kenyan public is equipped to accept and use self-testing safely as an approach to help to reduce workload at public healthcare facilities, and know one’s COVID-19 status in a private manner. The informants emphasized the need to provide counselling to end-users, to support those needing to self-isolate, and to engage different civil society stakeholders in information provision on self-testing. Fear of stigma and of forced isolation were noted as potential deterrents to self-testing uptake for some individuals. In conclusion, there is high acceptability of self-testing in Kenya among decision-takers. However, enhanced education, counselling, and addressing deterrents to testing would be helpful to ensure effective use of SARS-CoV-2 self-testing in Kenya.

The work presents the results of numerical fatigue analysis of a turbine engine compressor blade, taking into account the values of initial stresses resulting from surface treatment - shot-peening. The values of the residual stresses were estimated experimentally using X-ray diffraction. The paper specifies the values of the residual stresses on both sides of the blade and their reduction due to the cutting through the blade - relaxation. The obtained values of the residual stresses were used as initial stresses in the numerical fatigue analysis of the damaged compressor blade, which is subjected to resonant vibrations of known amplitude. Numerical fatigue ε-N life analysis was based on the several fatigue material models: Manson’s, Mitchell’s, Baumel-Seeger’s, Muralidharan-Manson’s, Ong’s, Roessle-Fatemi’s and Median’s, and also on the three models of cyclic hardening: Manson’s, Xianxin’s, and Fatemi’s. Because of this approach, it was possible to determine the relationship between the selection of the fatigue material ε-N model and the cyclic hardening model on the results of the numerical fatigue analysis. Additionally, the calculated results were compared with the results of experimental research, which allowed for a substantive evaluation of the obtained results. These results are of great scientific and practical importance. The problem of determining the fatigue life of blades with defects operating under resonance vibrations is one of the original tasks in the field of fracture mechanics and experimental mechanics. The results obtained are of great importance in the aviation industry and can be used during engine maintenance and inspections to assess the suitability of blades with defects in terms of the needs of further work. This aspect of engineering maintenance is of great importance from the aircraft safety point of view.

Sexual Issues played a significant role in Judaism’s engagement with its Greco-Roman world. This paper will examine that engagement in the Hellenistic Greco-Roman era to the end of the first century CE. In part sexual issues were a key element of demarcation between Jews and the wider community, alongside such matters as circumcision, food laws, sabbath keeping and idolatry. Jewish writers, such as Philo of Alexandria, make much of the alleged sexual profligacy of their Gentile contemporaries, not least in association with wild drunken parties, same-sex relations and pederasty. Jews, including the emerging Christian movement, claimed the moral high ground. In part, however, matters of sexuality were also areas where intercultural influence is evident, such as in the shift in Jewish tradition from polygyny to monogyny, but also in the way Jewish and Christian writers adapted the suspicion and sometimes rejection of passions characteristic of some popular philosophies of their day, seeing them as allies in their moral crusade.

Simple Summary: 200 words Will biology, including humans, benefit or harm from new developments in information such as artificial intelligence (AI). First, are biology and information different? Life is an ordered form that can reproduce, maybe with variation; and any ordered arrangement, biological or not, potentially contains information. There have been ordered forms since earth was just a ball of chemicals, and some such chemicals can reproduce. So biological and non-biological information might be components of a unified process, ‘PanEvolution’ or ‘Pan-Evo’, based on the same four operations for living or non-living entities - Innovation; Transmission and replication; Adaptation; and Movement. This can produce separate groups called ‘species’. In a current Panspeciation event, information held in biology - especially our brains - is moving into its own environment. Harm to biology might be minimal if humans and AI both behave intelligently, because vastly different environments are optimal for humans and machines containing AI. This would be the first speciation-like event involving humans for millennia, but will not be particularly hostile to humans, if humans learn how to evaluate information and cooperate, to minimize the effect of both human stupidity and artificial simulated stupidity (ASS – a failure of AI). Abstract: 200 words Many people wonder whether biology, including humans, will benefit or harm from new developments in information such as artificial intelligence (AI). Biological and non-biological information might be components of a unified process, ‘Pan-Evolution’ or ‘Pan-Evo’, based on four basic operations – Innovation, Transmission, Adaptation, and Movement. Pan-Evo contains many types of variable objects, from molecules to ecosystems. Biological innovation includes mutations and behavioural changes; non-biological innovation includes naturally-occuring physical innovations, and innovation in software. Replication is commonplace in and outside biology, including autocatalytic chemicals, and autonomous software replication. Adaptation includes biological selection, autocatalytic chemicals and ‘evolutionary programming’ used in AI. Extension of biological speciation to non-biological information, creates a concept called ‘Panspeciation’. Panevolution might benefit or harm biology, but harm might be minimal if AI and the humans behave intelligently, because humans, and the machines in which AI resides, might split to the vastly different environments that suit them. That is a possible example of panspeciation, and would be the first speciation event involving humans for thousands of years. This event will not be particularly hostile to humans, if humans learn to evaluate information and cooperate better, to minimize both human stupidity and artificial simulated stupidity (ASS – a failure of AI).

The North American Monsoon (NAM) in southern Arizona continues to be a topic of interest to ecologists, climatologists, and citizens as well as the triggers and characteristics of plant growth and reproduction in relation to the onset of the monsoon. In researching the onset of the North American Monsoon (NAM) in south-central Arizona relative to the phenology of Saguaro cactus (Carnegiea gigantea) and other Sonoran Desert species we identified interesting and previously unreported features in the NAM rainfall data. We present preliminary descriptive analyses of (1) monsoon onset as measured by the first day after June 1 with precipitation ≥10 mm (1990-2022), (2) first day of year warming of Sea Surface temperatures (SST) in the Gulf of California to ≥29º C measured across five open-sea blocks (mean 9452 km2), and (3) El Niño Southern Oscillation (ENSO) anomaly with a threshold of +/- 0.5º C for the Oceanic Niño Index (ONI) in the Niño 3.4 region (5ºN-5ºS, 120º-170ºW). Three patterns emerge from our analyses: (1) The day of the year of monsoon onset occurs approximately 12 days earlier in the year from 1990-2022 in south-central Arizona. (2) There appears to be a signal in the rainfall onset data very roughly approximating cycles of ENSO Oceanic Niño Index (ONI) anomalies in Niño region 3.4. (3) Gulf of California sea surface temperature (SST) and monsoon onset data support an expected link between the timing of SST warming and monsoon rainfall onset.

Blockchain technology can achieve decentralization, multi-party verification, anti-tampering, anonymity, traceability of transactions, and the application of distributed ledger. Countries around the world continue to seek the blockchain business models, technologies and applications, and have different visions and policies for the development of blockchain. This study conducts a comparative policy framework of theoretical analysis of the blockchain technology between the USA and China. Using the innovative policy tools proposed by Rothwell and Zegveld, the above mentioned governments are analyzed from the viewpoint of twelve policy tools. The results show that the USA and China all prefer to use “Environmental-side” policy. The USA has paid more attention to “Legal and regulatory”, “Public services” and “Procurement”. China has the highest proportion of policies in “Political tools”, followed by “Legal & regulatory”, while “Scientific and technical”, “Education” and “Overseas agent” come in third . The blockchain technology has developed vigorously among industries and its applications have gradually diversified. The results are provided to various stakeholders as a reference for policy planning.

We present a study of the radio variability of bright, $S_{1.4}\geq100$ mJy, high-redshift quasars at $z\geq3$ on timescales up to 30--40 years. The study involved simultaneous RATAN-600 measurements at frequencies of 2.3, 4.7, 8.2, 11.2, and 22.3 GHz in 2017--2020. In addition, data from the literature were used. We have found that the variability index $V_S$ of the quasars ranges from 0.02 to 0.96, with about half of the objects in the sample showing a variability index in the range of 0.25--0.50, which is comparable to that of the blazars at lower redshifts. The distribution of $V_S$ at 22.3 GHz is significantly different from that at 2.3--11.2 GHz, which may be attributed to the fact that a compact AGN core dominates at the source's rest frame frequencies greater than 45 GHz, leading to higher variability indices obtained at 22.3 GHz (the $V_S$ distribution peaks around 0.4) compared to the lower frequencies (the $V_S$ distribution peaks around 0.1--0.2). Several source groups with distinctive variability characteristics were found using cluster analysis of quasars. We propose 7 new candidates for gigahertz peaked-spectrum (GPS) sources and 5 new megahertz peaked-spectrum (MPS) sources based on their spectrum shape and variability features. Only 6 out of 23 sources previously reported as GPS demonstrate a low variability level typical of classical GPS sources ($V_{S} < 0.25$) at 4.7--22.3~GHz. When excluding the highly variable peaked-spectrum blazars, we expect no more than 20\% of the sources in the sample to be GPS candidates and no more than 10\% to be MPS candidates.

To improve the voltage gain of step-up converters, cascaded technique is considered as a possible solution in this paper. By considering the concept of cascading two Z-source networks in a conventional boost converter, the converter takes the advantages of both impedance source and cascaded converters. However, by applying some modifications, the proposed converter provides high voltage gain while the voltage stress of switch and diodes are still low. Moreover, the low input current ripple of the converter makes it absolutely appropriate for photovoltaic applications in order to expand the lifetime of PV panels. After analyzing the operation principles of the proposed converter, simulation and experimental results of a 100W prototype are presented to verify the proposed converter performance.

Transporting water from one side of a valley or gorge to the other requires construction of an aqueduct bridge or elevated aqueduct. These features are striking elements on cultural landscapes. Unlike previous research that emphasized architecture or design and relied on documentary sources and published works, this study focuses on details of construction and first-hand observation. Roman and Medieval elevated aqueducts in Spain were subjected to rigorous field examination. Marked variations were found to exist between structures of each age. No two aqueduct bridges are alike indicating the absence of standard designs. Locally available materials were used. Construction seems to have been overseen and carried out by individuals who possessed inconsistent degrees of skill. Roman treatises discussed aqueduct bridges, but not how to build them. Many palaces were clearly designed and built by highly skilled personnel during Medieval times, but more mundane public works projects such as aqueducts appear to have been carried out by less-skilled individuals. These findings have implications regarding the construction of elevated aqueducts by Spaniards in the Americas during the 16th century.

We review our theory of interdependence applied to autonomous human-machine teams, with which we have made several generalizations based on theory that have led to new discoveries, compared to social science which is struggling to break free of its validation crisis, but also has no generalizations to new discoveries with human teams, let alone to human-machine teams. In this invited article, based around the stability of a team, of our discoveries, we review the uncertainty between a team's structure and its performance, our first finding. We generalize that finding to deception, vulnerability, innovation and fittedness. From there, our next generalization is to the quantum likeness of interdependence and quantum mechanics; we move on to Shannon holes, knowledge, and conclude with the value of debate and the need for boundaries to contain debate, to reduce interference, and to protect states of interdependence. After the introduction, we extend our model in Section 2 to energy and time, and we close with a brief review of innovation and future plans.

Sulfur dioxide (SO2) reduction remains an area of global necessity further enhanced by the current international focus on pandemic diseases mitigation, elimination of air pollution, and promotion of renewable green energy. The dynamics of chemical bond-strength breaking and reformation in the transition state (TS) is a fundamental process in the reduction of SO2 by CO. Density Functional Theory (DFT) has been used to determine optimal TS reaction pathway via a novel triple-hybrid catalyst utilizing doubly-charged negative atomic V, Mn, and Au. The triple-hybrid catalyst is furthermore tailored to the subsequent minimization of each individual step of the 3-Step SO2 reduction by CO chemical reaction. Each optimized step 1, 2, and 3 is minimized with doubly-charged V, Mn, and Au, respectively, with TS barrier reductions ranging from 1.18 eV to 0.002 eV. Super-benzene, armchair (6, 6) single wall carbon nanotube, and fullerene TS reaction pathways have also been calculated to compare the nanoscale catalytic effectiveness with that of the atomic scale transition metals.

Background: Inappropriate use of antibiotics has been reported to contribute to the emergence and increase of antimicrobial resistance (AMR) in the world. Antibiotics are prescription-only medicines to be dispensed to a person with a legal prescription inscribed by a qualified medical practitioner. Enforcing the dispensing of antibiotics with prescription is a way to promote the rational use of antibiotics and preventing the development and spread of AMR. It is, therefore, the responsibility of a pharmacist to dispense or supervise the dispensing of antibiotics in pharmacies and ensure its rational use. This study aimed to assess pharmacists’ knowledge, attitude and practice regarding the dispensing of antibiotics without prescription in Tanzania. Methods: An online semi-structured questionnaire was designed, tested and shared with licensed pharmacists in Tanzania through an invitation link sent in their official WhatsApp groups. A list of names, contacts and emails of licensed pharmacists obtained from the Pharmacy Council was used to directly contact and request pharmacist to fill the questionnaire, in case the pharmacist contact was not on WhatsApp, a text SMS invitation was sent. Study data were collected and managed using REDCap electronic data capture tools hosted at Muhimbili University of Health and Allied Sciences, Dar es Salaam, Tanzania. Data were then downloaded and exported into Statistical Package for Social Sciences (SPSS) version 20 for data analysis; Chi-square test was used to test association for categorical data, where a p-value of less than 0.05 was considered statistically significant. Results: More than 75% of pharmacists had excellent knowledge about the legal requirements for dispensing antibiotics and of the AMR challenge. Of the interviewed pharmacists, seventy-four percent admitted to dispensing antibiotics without prescription in their daily practice. The main reasons for administering antibiotics without prescription were the profitability nature of pharmacy business, a failure of the patient to get a prescription and lack of stringent regulatory authorities. Penicillins, macrolides and floroquinolones were the classes of antibiotics mostly dispensed without a prescription. Conclusion: The study shows that the dispensing of antibiotics without prescription is a common practice in Tanzania. The regulatory authorities should make regular inspections in pharmacies to detect this malpractice. The community should be trained on the importance of taking laboratory tests before getting medications for their sickness by a qualified medical practitioner.

The Batch process of Adsorption were conducted using Congo red (CR) as the adsorbate and Jatropha curcas seed (chaff) as the adsorbent material. Adsorption kinetics and isotherms analysis were conducted and results obtained confirmed the adsorption process as highly dependent on effects such as; contact time, adsorbent dosage, initial dye concentration and the particle sizes of adsorbate. However, the sorption equilibrium for Congo red dye unto jatropha curcas seed (chaff) was reached within 180 minutes, more so, the Adsorption efficiency was recorded at 82.05%. The process of the experimental sorption kinetics followed a pseudo-second-order kinetic model while Freundlich isotherm model was best applicable for obtaining the equilibrium of the parameters. These is an effective confirmation and validation of jatropha curcas seed (chaff) application as environmentally friendly and low-cost biomaterial for dye removal from aqueous solutions and industrial effluents.

The existence of low-cost and accurate tools that can equip the First Responders (FRs) to detect trapped victims and provide insights about their health condition in the aftermath of a disaster, is imperative. To address the problem of detecting trapped victims behind walls or debris, we have developed a tool that exploits an Ultra-Wide Band (UWB) radar sensor for data collection and Machine Learning (ML) algorithms for data analysis. To evaluate the efficacy of our approach, we collected data from nine humans, both in standing and lying down positions. Next, we applied various ML algorithms to the collected dataset for two discrete sub-tasks that are of interest from an FR’s perspective. The first task is the detection of the victim’s presence, where the algorithms attained more than 95% accuracy and F1-Score. The second task is the estimation of the distance between the radar sensor and the victim, where the tool showed an average error of less than 40 cm.

A U.S. government health agency conducted epidemiological studies to evaluate whether exposures to drinking water contaminated with volatile organic compounds at U.S. Marine Corps Base Camp Lejeune, North Carolina, were associated with increased health risks to children and adults. These health studies required knowledge of contaminant concentrations in drinking water—at monthly intervals—delivered to family housing, barracks, and other facilities within the study area. Because concentration data were limited or unavailable during much of the period of contamination (1950s–1985), the historical reconstruction process was used to quantify estimates of monthly mean contaminant-specific concentrations. This paper integrates many efforts, reports, and papers into a synthesis of the overall approach to, and results from, a drinking-water historical reconstruction study. Results show that at the Tarawa Terrace water treatment plant (WTP) reconstructed (simulated) tetrachloroethylene (PCE) concentrations reached a maximum monthly average value of 183 micrograms per liter (ug/L) compared to a one-time maximum measured value of 215 ug/L and exceeded the U.S. Environmental Protection Agency’s current maximum contaminant level (MCL) of 5 ug/L during the period November 1957–February 1987. At the Hadnot Point WTP, reconstructed trichloroethylene (TCE) concentrations reached a maximum monthly average value of 783 ug/L compared to a one-time maximum measured value of 1,400 ug/L during the period August 1953–December 1984. The Hadnot Point WTP also provided contaminated drinking water to the Holcomb Boulevard housing area continuously prior to June 1972, when the Holcomb Boulevard WTP came on line (maximum reconstructed TCE concentration of 32 ug/L) and intermittently during the period June 1972–February 1985 (maximum reconstructed TCE concentration of 66 ug/L). Applying the historical reconstruction process to quantify contaminant-specific monthly drinking-water concentrations is advantageous for epidemiological studies when compared to using the classical exposed versus unexposed approach.

Equine-assisted services (EAS) are being increasingly used as complementary interventions for military veterans who have experienced trauma. However, there is limited evidence of benefit for this population and almost no literature describing desired potential outcomes and possible mechanisms of action. The aim of this article is to address these gaps by reviewing the extant literature of animal-assisted interventions in general, and equine-assisted services in particular, with the goal of providing guidance for future investigations in the field. Currently, the field is in the early stage of scientific development, but published results are promising. Interventions that enhance treatment compliance and/or outcomes could benefit this population. Preliminary results, reviewed herein, indicate that EAS interventions might benefit the military veteran population by enhancing treatment engagement and therapeutic alliance, as well as contributing to symptom reduction and resulting in various transdiagnostic benefits. It is recommended that future studies include exploration of potential beneficial outcomes discussed herein as well as investigate suggested mechanisms of action.

Good governance in natural resource management (NRM) is one of the most challenging issues in developing countries that often inappropriately embedded in national policies and political agendas. It is, in fact, even more important for countries like Bangladesh with exceptionally high pressure and dependence on its natural resources for sustaining rural livelihoods. Globally, nowadays, good governance is considered as one of the key factor for achieving the goal of sustainable development and biodiversity conservation. Bangladesh, of late has responded to that global zeal by involving local communities in the management of country’s declining forest and other natural resources. The colonial legacy of the forestry sector of Bangladesh was planned and, managed as interim projects through donors’ prescriptions. Thus, institutions, management processes and conservation outcomes were problematic. The conventional approach adopted by colonial and post-colonial regimes for forest management also proved to be inefficient due to its top-down management system. The absolute dependency on donor support, and their prescription sometimes worsened the situation both ecologically and socially. Global, regional and local trends supported the need for a different dimension in the governance paradigms. The introduction of a pluralistic approach, known as co-management in protected areas (PAs) is an example of an attempt whereby shared governance mechanism are implemented to attain the desired goals of conservation that will also address the livelihoods and aspirations of communities living in and around PAs of the country. However, in designing future forest and PA regimes the concern of the external aid support and attached conditions remain a reality that needs to be addressed. Adequate attention should be given to our vanishing biodiversity, culture and community livelihoods through devising an appropriate governance mechanism recognizing and supporting local rights, access and participation in the environmental management. It is now time to mainstream the adhoc nature of governance according to our national conservation strategy and policy frameworks in order to achieve the goals and objectives of the Bangladesh NRM sector addressing the human and community right of people in the specific context of forest protected areas management.

In this paper, we prove the existence of three solutions for a $p$-Kirchhoff problem with $\psi$-Hilfer fractional derivative. To be more precise, we use the variational method and we prove that the associated functional energy admits a critical point in each of the three constructed sets, these critical points are weak solutions for a studied problem. Moreover, by definition of these sets, one of these solutions is positive, the second is negative, and the third one change sign. At the end of this work, we present an example to validate our main results.

Biodiversity has become an issue of global anxiety over the past decades due to its rapid decline worldwide. Bangladesh as one of the most densely populated countries in the world is no more exception. The country, although, was once very rich in biodiversity, during the last few decades as a consequence of the rapid reduction in forest area, urbanisation, habitat modification, unsustainable natural resources use and collection and overall climate change it has decreased alarmingly. Of late, the government, as a signatory of various regional and international conservation treaties, has taken various initiatives to improve country’s dwindling biodiversity. This paper reviews the present situation of biodiversity in Bangladesh, management trends and major causes of biodiversity loss. A separate statutory body is fundamental to ensure conservation, sustainable use and equitable sharing of benefits arisen from biodiversity in the country.

Despite of being an exceptionally biodiversity rich country, the forest coverage of Bangladesh is declining at an alarming rate. Declaration and management of protected areas in this regard is one of the efforts from government side to tackle the loss of biodiversity. The limited numbers of forest-protected areas (FPA), established to conserve the dwindling forest biodiversity of the country with high pressure on them for timber, non-timber forest products, and fuelwood - makes their management challenging. Moreover, most of the FPAs of the country declared only in the recent decades with very limited infrastructure, manpower and policy support for monitoring and governance. Some people-centred approaches for the management of FPAs and alternative livelihood and income generation subsidies although made available through a few project interventions, their number are still inadequate and performance remains less than satisfactory. This chapter provides a critical review of the FPAs of Bangladesh looking at their role in biodiversity conservation, management challenges, and key lessons from previous management interventions with recommendations for the future. It has been revealed that the FPA system of Bangladesh still poorly represents the diverse forest ecosystems with relatively small forest size and lack of corridors for the movement of wildlife. There are ample opportunities to render co-management of FPAs an effective strategy to minimize the conflicts in FPAs management in the country. It is, however, important to ensure the access of local forest-dependent people to different alternative income generating options that may adequately support their livelihoods.

This work analyzes the severity and risk associated with Automatic Dependent Surveillance-Broadcast (ADS-B) message drop out in Detect and Avoid (DAA) function of Unmanned Aircraft System (UAS). Performance assessment of the Universal Access Transceiver (UAT) ADS-B message implies that in some cases ADS-B fails to update within a specified update interval, which is referred to as drop out in this work. ADS-B is a fundamental surveillance sensor for both class 1 and class 2 DAA systems. Message loss or drop out has been found as one of the common limitations of the ADS-B system. The key feature of this study is incorporating the update rate of real ADS-B data transmitted from the manned aircraft. The data were received from the Grand Forks International Airport, North Dakota. Monte Carlo method has been adopted to resolve encounter scenarios in the presence of drop out. The change in the alert triggered by the UAS DAA in the presence of ADS-B drop out has been investigated. Furthermore, the risk matrices are created to quantify the associated risk with drop out affected alerts. Simulation results depict that both the duration of drop out and DAA look-ahead time affect the alert-triggering function of UAS. With a small look- ahead window and longer duration of drop out, the number of warning alerts increases. Also, alerts are affected more during an overtaking encounter than that of a head-to-head encounter. A system-level analysis is also carried out to recognize the potential reasons behind the ADS-B drop out.

In this study, the degradable superhydrophobic Mg/P/Z/F/H (magnesi-um/poly(-caprolactone)/zinc oxide/1H,1H,2H,2H-perfluorodecyltriethoxysilane (PFDTES)/ heating process) composite materials were prepared through one-step method for enhancing the corrosion resistance of AZ91D magnesium alloys. Electrochemical measurements showed that Mg/P/Z/F/H materials significantly improved the corrosion resistance of magnesium alloys in 3.5 wt.% NaCl. The self-cleaning, adhesion and stability tests suggested that Mg/P/Z/F/H composite materials had well self-cleaning properties, good adhesion strength and stability in wet atmosphere.

Floodplains are critically important ecosystems that provide a whole suite of ecosystem services including nutrient and carbon sequestration, flood mitigation, water storage, and critical wildlife habitat to name a few. However, human modification of rivers and floodplains through channelization, artificial levee construction, reduction in active floodplain area, and water management can significantly reduce the ecosystem function of river-floodplain systems. In this study, we evaluated the changes in nutrient loading of the Kissimmee River floodplain during the restoration of the river-floodplain system. In addition to time-series loading analysis, we also evaluated soil nutrient concentrations across the lower portion of the Kissimmee River floodplain. During the 44-year nutrient loading time-series, the floodplain remained a nutrient exporter with changes in nutrient loading generally corresponding to both water quality (i.e. point source reductions) and hydrologic restoration activities in the watershed and Kissimmee River floodplain. During the study period, inputs of total phosphorus and total nitrogen loads from upstream either significantly increased or remained the same. In addition to external sources of nutrients, internal sources of nutrients from floodplain soils can also contribute to the total nutrient export from the system. These internal sources could be organic via the decomposition of organic matter or geologic from the original excavation of the canal and/or restoration backfilling. Soil nutrient concentrations vary between vegetative communities and landscape position and could be a significant source of phosphorus to the downstream system which is plagued by eutrophic conditions. Therefore, as floodplain function in the Kissimmee River continues to be restored and managed, additional effort may be needed to address nutrient inputs and internal legacy nutrients.

This work shows a correlation between light reflectance, absorption, and morphologies of series of (1-x) BM–x PT, (x = 0.0, 0.02, 0.04, 0.08, 0.12, 0.16, 0.24) ceramics composite. The (1-x) BM–x PT showed features of a black mirror with a low optical energy gap. The measured Vis-NIR diffused reflectance enabled the calculation of the energy gap using the modified Kubelka-Munk function. The estimated energy gap was lower than 1.5 eV related to low reflectance in the Vis-NIR range. Moreover, obtained histograms of grains, using scanning electron microscope, enabled the correlation between grains size and amount of lead titanate. We deduced from the ceramics surface morphology that marked porosity also induced reflectivity of low magnitude. We correlated the magnitude of the energy gap with phases of the BM-PT composite and with the electrical conductivity activation energy reported in the literature. Our results findings opened prospect studied materials for optical applications.

The basis for computation in the brain is the quantum threshold of the ‘soliton’ accompanying the ion changes of the action potential and the refractory membrane at convergences. We provide a logical explanation from the action potential to a neuronal model of the coding and computation of the retina and have explained how the visual cortex operates by quantum phase processing. In the small world network parallel frequencies collide into definable patterns of distinct objects. Elsewhere we have shown how many sensory cells are mean sampled to a single neuron and that convergences of neurons are common. We have also demonstrated, using the threshold and refractory period of a quantum phase pulse, that action potentials diffract across a neural network due to the annulment of parallel collisions in phase ternary computation (PTC). Thus, PTC applied to neuron convergences results in collective mean sampled frequency and is the only mathematical solution within the constraints of brain neural networks (BNN). In the retina and other sensory areas, we discuss how this information is coded and then understood in terms of network abstracts within the lateral geniculate nucleus (LGN) and visual cortex. First by defined neural patterning within a neural network, and then in terms of contextual networks, we demonstrate that the output of frequencies from the visual cortex contain information amounting to abstract representations of objects in increasing detail. We show that nerve tracts from the LGN provide time synchronisation to the neocortex (defined as the location of the combination of connections of the visual cortex, motor cortex, auditory cortex, etc). The full image is therefore combined in the neocortex with other sensory modalities so that it receives information about the object from the eye, and all abstracts that make up the object. Spatial patterns in the visual cortex are formed from individual patterns illuminating the retina and memory is encoded by reverberatory loops of computational actions potentials (CAPs). We demonstrate that a similar process of PTC may take place in the cochlea and associated ganglia, as well as ascending information from the spinal cord, and that this function should be considered universal where convergences of neurons occur.

The goal of this article is to provide a review of the experimental techniques and procedures using vibration methods for the Structural Health Monitoring (SHM) of Polymer-Matrix Composites (PMC). It aims to be a guide for any researchers to carry out vibration experiments. The linear methods are first introduced. But as PMC is a complex material, these classic methods showed some limits, such as low accuracy for small damages, and a high environmental dependency. This is why the nonlinear methods are secondly studied, considering that the complexity of PMC induces a nonlinear behavior of the structure after damage occurrence. The different damage mechanisms are well explained in order to evaluate the potential of each vibration method to detect them.

The horizontal storm structure surrounding lightning ignited wildfires is examined using Vaisala’s National Lightning Detection Network (NLDN), NCEP’s Stage IV gauge corrected radar precipitation mosaic, and the US Forest Service’s Fire Occurrence Database. Though lightning flash density peaks strongly around fire ignitions on the instantaneous 1 km scale, on the hourly 10 km scale both the lightning and precipitation peaks are typically offset from fire ignitions. Lightning density is higher and precipitation lower around ignition points compared to non-ignition points. Both regression and horizontal distributions are consistent with the claim that positive flashes have a stronger association with ignition than negative flashes, but the statistical significance remains ambiguous

An analysis of the performance of Automatic Dependent Surveillance-Broadcast (ADS-B) data received from the Grand Forks, North Dakota International Airport was carried out in this study. The purpose was to understand the vulnerabilities of Universal Access Transceiver (UAT) ADS-B system and recognize the effects on present and future Air Traffic Control (ATC) operation. The Federal Aviation Administration (FAA) mandated all the General Aviation aircraft to be equipped with ADS-B. The aircraft flying within United States and below the transition altitude (18,000 feet) are more likely to install an UAT ADS-B. At present unmanned aircraft systems (UAS) and autonomous air traffic control (ATC) towers are being integrated into the aviation industry and UAT ADS-B is a basic sensor for both class 1 and class 2 Detect and Avoid (DAA) systems. As a fundamental component of future surveillance system, the anomalies and vulnerabilities of ADS-B system need to be identified to enable a fully utilized airspace with enhanced situational awareness. The data received was archived in GDL-90 format, which was parsed into readable data. The anomaly detection of ADS-B messages was based on the FAA ADS-B performance assessment report. The data investigation revealed ADS-B message suffered from different anomalies including drop out; missing payload; data jump; low confident data and altitude discrepancy. Among those studied, the most severe was drop out and 32.49% of messages suffered from this anomaly. Dropout is an incident where ADS-B failed to update within a specified rate. Considering the potential danger being imposed, an in-depth analysis was carried out to characterize message dropout. Three flight parameters were selected to investigate their effect on drop out. Statistical analysis was carried out and Friedman Statistical Test identified that altitude affected drop out more than any other flight parameters.

Globally, humans are struggling with the double threat of communicable and non-communicable diseases, which are presenting new challenges to public health. Public health problems are generally studied and addressed at primary, secondary and tertiary levels. Most effective results are seen with primary interventions. Public health is becoming more aware of the importance of environment-gene interactions in the ontology of health and disease using epigenetics. Epigenetics is the study of altered gene expression without change in base pairs. Be it physical, social, behavioral, or economic factors; they all influence quality of life and health of individuals and populations. That environments are changing the human health phenotype and these changed phenotypes are heritable is of concern for the future of the human race. Knowing the causes of non-communicable human diseases using epigenetics will contribute to the development of new policies to encourage prevention using primary public health initiatives. Research and application of epigenetics shows great promise for improving population health. Continued advances in epigenetics will enhance how we understand and address the way environments are affecting the human health phenotype. For some time, health systems have been and continue to be tertiary in nature. Epigenetic changes can provide information necessary to better understand how social determinants of health can be used to build societies focused on equitable health for all people, rather than continuing to focus on treatment of diseases in the tertiary phase that leads to health disparities. Understanding mechanisms of social determinants of disease, will allow society to evolve in a health-oriented rather than a disease-oriented world. For this reason, we must enhance and apply epigenetics (physical, social, behavioral, economic) research to policy development. We will discuss how bringing social determinants together with biology can be used as new tools for public health policy.

Liquid biopsy has been developed to diagnose and monitor cancer. Despite the recent advances in investigating early cancer detection and diagnosis strategies, there is still a lack of improvements in capturing (CTCs). To archive this, we developed an efficient CTC detection system by integrating gold nanoparticles and a microfluidic platform, which can achieve CTC capture within 120 min. The microdevice was functionalized by immobilizing antibodies specific to the target cells. The method was tested with spiked tumor cells in whole human blood with three pancreatic cancer cell lines and compared with purified cancer cells suspended in a phosphate buffer solution. Our results captured pancreatic cancer cells spiked in blood samples with efficiency (90±3.2)% and were used to isolate CTCs from patients with metastatic pancreatic cancer. This methodology will enable the production of functionalized, patterned surfaces that interact with tumor cells, enhancing the selective capture of CTCs from biological assays.

The number of children diagnosed with autism spectrum disorder (ASD) has increased substantially over the past two decades with current research unable to fully account for this dramatic increase in prevalence. One explanation proposes that both intrinsic (e.g., genetic) and extrinsic (e.g., environmental) risk factors may be involved in the etiology of ASD. The goal of this review paper is to explore modifiable pathways for intervention in children at risk for ASD, specifically examining how early social experience may be correlated with epigenetic change in genes associated with autism. We present an innovative model which proposes that polygenic risk and social experience (via epigenetic mechanisms) may both contribute to the observed ASD phenotype. Previous research on genetic, environmental, and epigenetic mechanisms implicated in the etiology of ASD will be reviewed, with an emphasis on the oxytocin receptor gene, which is epigenetically altered by early social experience, plays a crucial role in mammalian social and cognitive development, and is associated with both genetic and epigenetic risk for ASD. Identifying intrinsic (e.g., genetic) and extrinsic (e.g., social experience) risk markers for ASD, a combination of which has not previously been examined, would transform our understanding of this condition, facilitate earlier identification of ASD risk, and guide early intervention efforts. This may have a far-reaching impact on individuals with ASD, their families, and society.

Arguments have been made that violation of the CHSH and similar inequalities shows that reality at the quantum level must be non-local. The derivation of Bell inequality is re-examined and it is shown that violations of these inequalities merely demonstrates the existence of contextuality - they say nothing about the causal influences underlying such contextuality. It is argued that contextual systems do not possess enduring (propositional) properties, merely contingent properties. An example is presented of a classical situation, a two player co-operative game, whose random variables are consistently connected in the sense of Dzhafarov, and which is contextual, violating the CHSH inequality. In fact it also violates the Tsierl'son bound. The key is that this system is generated and its properties are disposed, not determined.

The virtually complete loss of intestinal worms, known as helminths, from Western society has resulted in elimination of a range of helminth-induced morbidities. Unfortunately, that loss has also led to inflammation-associated deficiencies in immune function, ultimately contributing to widespread pandemics of allergies, autoimmunity, and neuropsychiatric disorders. Several socio-medical studies have examined the effects of intentional reworming, or self-treatment with helminths, on a variety of inflammation-related disorders. In this study, the latest results from ongoing socio-medical studies are described. The results point toward two important factors that appear to be overlooked in some if not most clinical trials. Specifically, (a) the method of preparation of the helminth can have a profound effect on its therapeutic efficacy, and (b) variation between individuals in the effective therapeutic dosage apparently covers a 10-fold range, regardless of the helminth used. These results highlight current limits in our understanding of the biology of both hosts and helminths, and suggest that information from self-treatment may be critical for clinical evaluation of the benefits and limits of helminth therapy.

Arterial wall remodeling underlies increased pulmonary vascular resistance and right heart failure in pulmonary arterial hypertension (PAH). None of the established vasodilator drug therapies for PAH prevents or reverses established arterial wall thickening, stiffening and hypercontractility. Therefore, new approaches are needed to achieve long-acting prevention and reversal of occlusive pulmonary vascular remodeling. Several promising new drug classes are emerging from better understanding of pulmonary vascular gene expression programs. In this review potential epigenetic targets for small molecules and oligonucleotides will be described. Most are in preclinical studies aimed at modifying growth of vascular wall cells in vitro or normalizing vascular remodeling in PAH animal models. Initial success with lung-directed delivery of oligonucleotides targeting microRNAs suggests other epigenetic mechanisms might also be suitable drug targets. Those targets include DNA methylation, proteins of the chromatin remodeling machinery and long noncoding RNAs, all of which act as epigenetic regulators of vascular wall structure and function. Progress in testing small molecules and oligonucleotide-based drugs in PAH models is summarized.

The Process Algebra model has been shown to provide an alternative mathematical framework for non-relativistic quantum mechanics (NRQM). It reproduces the wave functions of non-relativistic quantum mechanics to a high degree of accuracy. It posits a fundamental level of finite, discrete events upon which the usual entities of NRQM supervene. It has been suggested that the Process Algebra model provides a true completion of NRQM, free of divergences and paradoxes, with causally local information propagation, contextuality and realism. Arguments in support of these claims have been mathematical. Missing has been an ontology of this fundamental level from which the formalism naturally emerges. In this paper it is argued that information and information flow provides this ontology. Higher level constructs such as energy, momentum, mass, spacetime, are all emergent from this fundamental level.

Papain-like lysosomal cysteine proteases include 11 human cysteine cathepsins which act as endopeptidases and/or exopeptidases. They are involved in numerous physiological and pathological processes. Among them, only cathepsins B, H, C, and X/Z exhibit exopeptidase activity. Their activities are tightly regulated in various ways to prevent potentially hazardous effects on the cell. In this review, we focus on the structural and functional aspects of these four cysteine cathepsins and their role in neurodegeneration and cancer. Neurodegenerative disorders of aging share an endolysosomal dysfunction and accumulation and spread of oligomeric forms of neurotoxic proteins. The accumulation of various protein aggregates activates the microglia, thus inducing the activation and release of cysteine cathepsins and proinflammatory cytokines, leading to neurodegeneration. In cancer, cysteine cathepsins participate in tumor progression and metastasis. Tumor–stromal crosstalk leads to activation of the stroma and overexpression and secretion of proteolytic enzymes, triggering extracellular matrix degradation and the release of soluble factors. Activated stromal cells (i.e., macrophages, fibroblasts, mast cells) secrete additional growth factors, cytokines, and chemokines that are responsible for the regulation of processes leading to tumor progression and metastasis. Therefore, a better understanding of the role of cysteine cathepsins in neurodegeneration and cancer could lead to novel targeted therapeutic approaches.

Particle deposition on the surface of the drying chamber poses the main drawback in the spray drying process, which reduces the product recovery and affects the quality of the product. In view of this, the potential application of chemical surface modification to produce a hydrophobic surface that reduces the powder adhesion (biofouling) on the wall of the drying chamber was investigated in this study. The hydrophobic Polydimethylsiloxane (PDMS) solution was used in the vertical dipping method at room temperature to determine the optimum coating parameters on borosilicate glass and stainless-steel substrates, which were used to mimick the wall surface of the drying chamber, to achieve highly hydrophobic surfaces. A single-factor experiment was used to define the range of the PDMS concentration and treatment duration using the Response Surface Methodology (RSM). The Central Composite Rotatable Design (CCRD) was used to study the effects of the concentration of the PDMS solution (X1, %) and the treatment duration (X2, hr) on the contact angle of the substrate (°), which reflected the hydrophobicity of the surface. A three-dimensional (3D) response surface was constructed to examine the influence of the PDMS concentration and treatment duration on the contact angle readings, which serve as an indicator of the surface's hydrophobic characteristic. Based on the optimisation study, the PDMS coating for the borosilicate glass achieved an optimum contact angle of 99.33° through the combination PDMS concentration: X1 = 1% (w/v) and treatment time X2 = 4.94 hr, while the PDMS coating for the stainless-steel substrate achieved an optimum contact angle of 98.31° with PDMS concentration: X1 = 1% (w/v) and treatment time X2 = 1 hr. Additionally, the infrared spectra identified several new peaks that appeared on the PDMS-treated surfaces, which represented the presence of Si-O-Si, Si-CH3, CH2, and CH3 functional groups for the substrates coated with PDMS. Furthermore, the surface morphology analysis using the Field Emission Scanning Electron Microscopy (FESEM) showed the presence of significant roughness and uniform nanostructure on the surface of PDMS-treated substrates, which indicated the reduction of wettability and the potential effect on unwanted biofouling on the spray drying chamber.

There is a relatively high risk of virus transmission in dental procedures and oropharyngeal examinations. We investigated the effects of mouthwashes on covid-19 viral load reduction during dental practices and oro-pharyngeal assessments. We performed a systematic search in PubMed, EMBASE, Scopus, Web of Science, Cochrane library for relevant studies up to February 2021. Papers evaluating patients with covid-19 infection (patients) who rinse mouthwashes (intervention) compared to patients who don’t rinse them (comparison) for reducing covid-19 viral load or reducing cross-infection of covid-19 (outcome) in the randomized and non-randomized clinical trial and quasi-experimental studies (study) were included due to PICOS question. Three independent authors conducted literature screening and data extraction. We extracted the most relevant data and we evaluated the risk of bias from the included studies. Out of 344 potentially eligible articles, six studies were included in this systematic review. Regarding viral load and negative cycle threshold (ct) values, 1% PVP_I and Listerine mouthwash were effective. 0.12% CHX mouthwash was effective 0-2 hours post rinsing, but it was not effective after 2 hours. A mixture solution of 0.2% Chlorhexidine gluconate and 6% Hydrogen peroxide was effective on day 5 of intervention. Gargling 1% hydrogen peroxide, 0.075% Cetylpiridinum Chloride (CPC), 0.5%PVP-I and 0.2% CHX mouthwashes was not effective on SARS-COV-2. It cannot be guaranteed that rinsing a specific kind of mouthwash prevents cross-infection of covid-19; however, the viral load of SARS-COV-2 in saliva will be decreased after rinsing mouthwashes containing 1%PVP-I and Listerine.

Two pilot scale desalination system employing carbon modified nano-sized, zero valent metals (n-ZVM) were maufactured and tested to determine (1) the degree to which high salt water (20 to 130 mS) could be desalinated and (2) if this degree of desalination could be maintained throughout an extended treatment period. Two pilot systems were tested (referred to as Generation 1 and Generation 2) consisting of parallel lines of 4 individual reactors in series, a settling tank and an activated carbon cell at the end of each reactor line. The system capacity was 300 gal in Generation 1 and 600 gal in Generation 2 total with a total hydraulic residence time of 6 hours per reactor line (one hour per cell/tank). A slurry of n-ZVM was introduced in the first reactor on each line to yield approximately 5 to 45 grams of nano-metal per 100 L of influent salt water. The n-ZVM slurry was made from mixing tea extract with metal salts (eg ferrous sulfate, ferric chloride) to produce the carbon modified metal slurry. Initial runs focused on dosing required to achieve maximum salt removal at each of three influent salt contents, 28 mS, 44 mS and 123 mS. Once dosing was set, continuous runs (14 days, 23 days and 9 days) were carried out to (1) examine the ability of the pilot to maintain the removal efficiency over an extended period, (2) to determine the weaknesses inherent in the pilot systems, and (3) to begin to develop CAPEX and OPEX estimates for the pilot and pre-design full scale mobile desalination unit (MDU) system. Results demonstrated that maximum removal occurred with 10 g/100L of salt for the 30 mS salt solution,16 g/100 L of salt for the 40 mS influent water and 40 g/100 L for the 130 mS influent. Salt removal (expressed as Na and Cl removed) approached 78% for the 30 mS influent and 41 mS influent respectively while removal for the highest salt influent (130 mS) approached 81 %. Addition of greater amounts of carbon modified slurry than those described resulted in a pH less than 6 which inhibits continued salt removal and would require addition of calcium or magnesium oxides/hydroxides or bicarbonate solutions at the influent side to achieve greater salt removal and of course greater cost per gallon. Continuous operation over the extended time-period showed no significant decrease in salt removal with typical day to day variation of no more than 10% suggesting that this approach to desalination could rapidly provide usable water from saline aquifers, seawater or even produced water. Treatment of saline waters at 30 mS or less yields effluent water in the range necessary for irrigation use of many crops while treatment of seawater or produced water levels of salt (40 mS or higher) yields effluent in the range of 8 to 10 mS a range ideal for RO influent that would prevent the production of large volumes of brine. Pilot testing continues with seawater extracted from Puget Sound, Seattle WA and higher levels of salt to better represent produced water.

Local food has continued to become more popular in both the home and as featured ingredients in all segments of food service. Numerous studies have explored the motivating factors for consumer purchasing motivators. However, no known study has explored if there is a correlation between ego and intent to buy local foods. This study adopted a modified version of the Theory of Trying and surveyed a sample of 237 food service buying agents in South Carolina to examine their perceptions of buying local. Results suggest that ego is a predictor of trying to purchase local foods for restaurants. It was also found that the modified model is an acceptable model for predicting buyer intent. These findings support the majority of the studies looking at ego-centric behaviors with green purchases and could potentially help local food suppliers to better market their products to foodservice establishments. This study could also act as the foundation for future studies to explore the full extent of ego’s motivational effect on purchasing intentions in the food service industry.

Money launderers prefer to use financial services as the ideal medium to launder. The study aimed to provide an overview of the global AML/CFT regulations, application and how they should evolve in this dynamic environment. To gather more insight, a qualitative study was undertaken with relevant documents analysed. The main findings were: country implementation of the global AML/CFT regulations differed due to political and economic factors amongst others. While the various AML/CFT enforcements done by sampled countries were mainly cease and desist orders and monetary penalties which were publicized; and drawbacks of global AML/CFT regulations centered on application of these regulations and emerging trends. These include among other definitions of money laundering, reference to the three stage of money laundering, link between penalty and violations, technological innovations and regulations paradigm shift, cyber-attacks and data privacy. The study contributes to application and growing body of knowledge in that the advent of technology has resulted in better consumer experiences, new payment platforms, products, and services. However, these innovations have broadened emerging money laundering risks and risks in general to the financial system. Hence the need to conduct research based FATF Recommendations as risk is dynamic and not static.

The dioecious property of sea buckthorn (Hippophae rhamnoides L.) prevents sex recognition via traditional observation at the juvenile stage, thus impeding breeding and economic cropping; RAPD and SCAR markers were used to identify the sexes. A total of 45 random decamer primers were used to screen genomic DNA pools of staminate and pistillate genotypes for genetic polymorphisms. One female sex-linked marker was identified. D15 (5′-CATCCGTGCT-3′) amplified a particular band of 885 bp, which showed polymorphism among staminate and pistillate genotype plants. The SCAR marker Hrcx-15 was obtained by sequencing the fragment. The alleles of 140 pistillate genotypes were examined but not of the 140 staminate genotypes discerned via taxonomy. Staminate and pistillate genotypes of sea buckthorn plants can be distinguished, using Hrcx-15 as a genetic marker for sex identification and for expediting cultivation for commercial applications.

In a continuation and extension of an earlier publication, the calculation of the refractivity and polarizability of organic molecules at standard conditions is presented, applying a commonly applicable computer algorithm based on an atom-group additivity method, where the molecules are broken down into their constituting atoms, these again being further characterized by their immediate neighbor atoms. The calculation of their group contributions, carried out by means of a fast Gauss–Seidel fitting calculus, used the experimental data of 5988 molecules from literature. An immediate subsequent ten-fold cross-validation test confirmed the extraordinary accuracy of the prediction of the molar refractivity, indicated by a correlation coefficient R^2 and a cross-validated analog Q^2 of 0.9997, a standard deviation σ of 0.38, a cross-validated analog S of 0.41, and a mean absolute deviation of 0.76%. The high reliability of the predictions has been exemplified with three classes of molecules: ionic liquids, silicon- and boron-containing compounds. The corresponding molecular polarizabilities have been calculated indirectly from the refractivity using the inverse Lorentz-Lorenz relation. In addition, it could be shown that there is a close relationship between the "true" volume and the refractivity of a molecule, revealing an excellent correlation coefficient R^2 of 0.9645 and a mean absolute deviation of 7.53%.

A robust bank industry is a major player in the stability of an economy. The operational efficiency and stability of banks are therefore paramount. By way of financial ratios and Z-score, this study analysed UT Bank’s financial performance prior to the 2017 bank sector reforms in Ghana. Annual financials over a ten year period (2007-2016) were used. Debt management practices of UT Bank per the results obtained were quite on the hind side and unimpressive. This was reflected in the poor leverage and risk management variables. UT Bank would have been unable to meet creditors’ claims considering the mean average values of debt-to-assets and debt-to equity ratios of 0.76 and 0.90 respectively. The entire bank sector will benefit if credit management practices of individual banks are refreshed and worked on. The bank industry regulator should tighten its supervisory and monitoring role over banks to help detect early signs of non-performing banks. The study further recommends that statutory lending limits of banks be re-enforced to uphold the threshold of 10 percent for unsecured loans and 25 percentage for secured loans of net owned funds of the bank.

Background: The Davidson Airway Function &amp; Nasal Evaluation (DAFNE) Scoring System was developed as an intuitive and research-based scoring system that could be validated through beta testing and easily introduced to healthcare providers of several subspecialties who treat nasal obstruction and breathing disorders (MDs, PAs, PTs, APRNs, DDSs, and DCs). This scoring system was shown to increase the knowledge of airway function, nasal measurement parameters, and identification of proper treatment options for sleep and breathing disorders. The basis for the DAFNE score was developed from a systematic review of nasal measurement data. Methods: Electronic searches of PubMed, MEDLINE, EMBASE Cochrane Library, and Scopus of publications between 1988-2022 were used to identify studies validating nasal function measurement parameters to create the algorithm for the DAFNE Score™. The systematic review was accomplished using the 2020 ‘Preferred Reporting Items for Systematic Reviews’ (PRISMA) guidelines. Results: Twenty studies met the inclusion criteria for systematic review. Primary outcomes measurements demonstrated reliability, repeatability and validity of the DAFNE measurement technologies, data and output. Conclusions: The data analysis and systematic review uncovered a need and framework to develop and validate a web-based software algorithm for global access to improve the understanding of data interpretation of nasal measurements from three nasal measurement technologies. DAFNE Scoring should be used as an adjunct tool in routine clinical practice and research to further understand the technology data output and how to collaborate with other healthcare providers to improve patient outcomes.

According to Young Minds [1] ‘everyone gets angry sometimes’. Their website offers a number of de-escalating strategies, including staying calm, managing responses and setting limits to help young people who most deem resistive. Yet, Young Minds are not alone because such logical advice is ubiquitous in the literature about challenging behaviour despite the fact that in our experience when faced with high states of arousal, most young people tend to act first and deal with the consequences later. It’s not that they are stupid or non-caring, but they are human capable of great feats as well as stupidity. The same is true for any claims that solution focused (SF) conversations can put right the several decades of psychological theory suggesting resistance requires logic and better cognition. By giving the correct thinking skills, young people will walk away from risk, avoid physical confrontation, handle challenging situations like logical thinkers, and generally discount that the process of growing up is part of the challenge. It is with this in mind that over recent years in our current SF practice (with staff group supervision) we have examined the concept of ‘resistance’ and how it can be put to use as a process of collaboration. To do this, we have revisited SF theory that preoccupied many of its pioneers during the 1980’s and 1990’s and attempted to make it useful for the early 2020’s for professionals having conversations with young people, who, in traditional models, are labelled challenging. We want to introduce key differences of solution focused practice and how Anita started to formulate a 6D-SF model (details, dynamics, dimensions, dispositions, dislocations, descriptions) for contemplating how groups of professionals relate to each other and are triggered by challenging behaviour. We do not claim to have proof, logic or exactness on our side, but we’re happy to suggest how our resistance mirrors what many of the staff teams feel and describe when working through their work.

The preparation and use of -(acyloxy)alkyl xanthates to generate and capture -(acyloxy)alkyl radicals is briefly reviewed. Their inter- and intramolecular additions to both activated and unactivated, electronically unbiased, alkenes, and to (hetero)aromatic rings, as well as their radical allylation and vinylation reactions are described. Application to the total synthesis of two 4-hydroxytetralone natural products is also presented.

In recent years Pd-containing catalytic systems for tandem processes has drawn special attention due to the enhanced catalytic properties and possibility to perform several reactions without the necessity to separate the intermediates. In this review, recent progress in Pd-catalyzed tandem processes is considered. Three types of catalytic systems were described: homogeneous catalysts (including immobilized Pd complexes); heterogeneous catalysts supported on oxides, MOFs, COFs, etc. with particular attention to the supports containing acid/base sites; metal-enzyme catalysts for chemoenzymatic tandem processes applied in fine organic synthesis and biotechnology. For homogeneous Pd-catalyzed reactions different tandem reactions were considered, i.e. cross-coupling, cyclization, carbonylation, isomerization, alkylation, arylation, etc.

Synthesis of zeolite T with a variety of desired characteristics necessitate extensive work in the formulation and practical experiments either by conventional hydrothermal methods or aided with different approaches and synthesis techniques such as secondary growth or microwave irradiation. The objectives of this review are to adduce the potential work in zeolite T (Offretite-Erionite) synthesis evaluating determining factors affecting the synthesis and quality of the zeolite T crystals. Attention is given to the extensive studies that interconnect with other significant findings.

The rise of Asian and the stagnation of Western middle classes over the last thirty years have resulted in gradual convergence of income of large parts of the world’s population. Recent global crises ‐ the Great Recession and the COVID-19 pandemic ‐ have led to a decline in income and increase in income uncertainty. Rise in consumption of lower quality goods of shorter durability and an overall decline in demand and economic activity resulted as challenges to the global economy. In this paper, we argue that generational responsibility in consumption can be an environmentally sustainable response to crises which enables the economies to overcome the crisis of confidence and reaffirms community ties. As an element of long‐term orientation in consumption, generational responsibility is a cultural phenomenon dependent on solidarity within family and the wider community. It is characterized by consideration of consequences of consumption choices on the environment, and the abundance of savings and the usability of goods to be inherited by future generations. For companies, willing to revisit their traditional business models and incorporate principles of sustainability in their competitive strategies, promotion of generational responsibility can become a new source of competitive advantage and a driver of economic recovery.

The present work studies the concept of productivity in shipbuilding and how it should be measured. The existing metrics, shipbuilding process and shipyard organization were studies in order to choose the most adequate metrics which would allow the measuring of a shipyard productivity in a systematic and holistic way. This is achieved by gathering the man-hours spent in each ship organized by cost centre and using Compensated Gross Tonnages as the measure of output from the shipyard. Data was gathered for thirty ships built in the same European yard organized by cost centre. From the data collected it was found that the ratio of hours spent in outfitting to the hours spent in structures is proportional to the complexity of the ship. There was also opportunity to study the work reduction resulting from building ships in series and the shares of labour for ships series and across ship types.

Background: Worldwide, around 73 million induced abortions take place every year. Of these, 45% are unsafe and can lead to complications. The evolution of the legal and practical landscape of abortion in the Democratic Republic of the Congo (DRC) over the last few years necessitates a re-examination of the experience of induced abortion, leading this study to measure the incidence of abortion among young women (15 to 29 years of age), as well as the heterogeneity of this problem according to the residence of these young women (slum vs. non-slum areas). Methodology: We used representative survey data on women aged 15–49 in Kinshasa, collected from December 2021 to April 2022. The survey included questions about the respondents’ and their closest confidants’ experience of induced abortion, including the methods and sources used. We estimated abortion incidence and heterogeneity over one year based on residence in the city of Kinshasa according to sociodemographic characteristics. Results: The incidence rate of induced abortion among the confidants (close friends) in 2021 was 131.5 per 1000 (95% CI: IQR 99.4–163.6). These rates were significantly higher than the corresponding estimates of those surveyed. The incidence of induced abortion was 24.4 per 1000 (95% CI: 15.8–32.9) abortions per 1000 women among the respondents. The incidence rates of induced abortion were much higher among the respondents residing in slums than among those residing in non-slums (29.2 vs. 13.0 per 1000; p &lt; 0.001). Conclusions: More precise estimates of the incidence of abortion indicate that the incidence rate of abortion was higher among young women residing in slums, who were unmarried and had no children. These incidences were higher among confidants than among respondents. There is still a lot of work to be done to fulfill the obligations outlined in the Maputo Protocol. This includes establishing easily accessible services that offer complete abortion care with a focus on women's needs, particularly in slum areas. The aim is to decrease the occurrence of unsafe abortions and their associated effects.

In this review, our goal is to design and test quantum-like algorithms for Artificial Intelligence (AI) in open systems to structure a human-machine team to be able to reach its maximum performance. Unlike the laboratory, in open systems, teams face complexity, uncertainty and conflict. All task domains have complexity levels, some have low, and others high levels. Complexity in this new domain is affected by the environment and the task, which are both affected by uncertainty and conflict. We contrast the individual and interdependence approaches to teams. The traditional and individual approach focuses on building teams and systems by aggregating the best available information for individuals, their thoughts, behaviors and skills. Its concepts are characterized chiefly by one-to-one relations between mind and body, a summation of disembodied individual mental and physical attributes, and degrees of freedom corresponding to the number of members in a team; however, this approach is characterized by the many researchers who have invested in it for almost a century with few effects that can be generalized to human-machine interactions; by the replication crisis of today (e.g., the invalid scales for self-esteem, implicit racism, and honesty); and by its many disembodied concepts. In contrast, our approach is based on the quantum-like nature of interdependence. It allows us to theorize about the bistability of mind and body, but it proposes a measurement problem and a non-factorable nature. Bistability addresses team structure and performance; the measurement problem solves the replication crisis; and the non-factorable aspect of teams reduces the degrees of freedom and the information derivable from teammates to match findings by the National Academies of Science. We begin with a review of the science of teams and a focus on human-machine team research in the laboratory versus the open; justifications for rejecting traditional social science while supporting our approach; a full understand of the complexity of the domain, tasks in the domain, and how teams address both; the mathematics involved; a review of results from our model versus the open field; a discussion of the results; conclusions; and the path forward to successfully advance the science of interdependence and autonomy.

Imagination is more important than knowledge, but if intellect does not provide the needed logical structures, capacities for envisioning new possibilities are overly constrained. The sustainability problems we face today cannot be solved with the same kind of thinking that created them, but clarity on what counts as a new kind of thinking is sorely lacking. This article proposes methodical, model-based ways of heeding Bateson's warning about the negative consequences for the ecology of mind that follow from ignoring the contexts of relationships. Informed by S. L. Star's sense of boundary objects, a sequence of increasingly complex logical types distinguishes and interconnects qualitatively different kinds of thinking in ways that liberate imaginative new possibilities for life. The economy of thought instantiated at each level of complexity is only as meaningful, useful, beautiful, ethical, and efficient as the standards informing local adaptive improvisations. Standards mediating the general and specific, global and local, universally transcendent and embodied particulars enable meaningful negotiations, agreements, and communications. Attending to the differences between levels of discourse sets up new possibilities for creative and imaginative entrepreneurial approaches to viable, feasible, and desirable goals for measuring and managing sustainable development.

The life and work of Ignacio Ellacuría, S.J. is of radical vision, and revolutionary change. His dynamic life and works accompanied El Salvador and the Universidad Centroamericana through perhaps the most tumultuous years of the country’s history, yet there has been limited work done to examine his contributions. This paper shows how Ellacuría viewed the role of a Christian intellectual, and a Christian university within his philosophical and theological framework. I argue that Ignacio Ellacuría held, similarly to his soteriological views, that the intellectual must also be willing to sacrifice all for the sake of his/her work in a pattern of discipleship/martyrdom prefigured by his exemplars Christ and Socrates. It was this dedication to praxis and theory that western theology and philosophy had respectfully lost since their foundations which he sought to restore to a central role. In conclusion, the Christian intellectual and institution, according to Ellacuría, must use its voice and life in service of the people even to the point of martyrdom; he would argue, the implicit reason for Christian martyrdom and the crucifixion of Christ himself.

Building heterojunction is promising strategy for the achievement of highly efficient photocatalysis. In this study, a novel SnIn4S8@ZnO Z-scheme heterojunction with tight contact interface was successfully constructed through a facile two-step hydrothermal method. The phase composition, morphology, and photophysical properties of SnIn4S8@ZnO were studied through a series of characterization methods, respectively. Methylene blue (MB) was selected as the target pollutant for photocatalytic degradation and the degradation process was fitted with pseudo-first order kinetics. The as-prepared SnIn4S8@ZnO heterojunctions exhibited outstanding photocatalytic activities for the degradation of MB. The optimized sample (ZS800), in which the molar ratio of ZnO to SnIn4S8 was 800, displayed the highest photodegradation efficiency of MB (91%) within 20 min. Furthermore, the apparent rate constant of photodegradation for MB of ZS800 (0.121 min−1) was 2.2 times higher than that of pure ZnO (0.054 min−1). The improvement of photocatalytic activity could be attributed to the effective spatial separation of photogenerated charge carriers through a Z-scheme heterojunction with intimate contact interface. This work will provide a new insight into constructing excellent ZnO-based photocatalytic systems for wastewater purification.

In this article, the concept of fuzzy $(\sigma,\mathcal{Z})$-contractive mapping has been introduced in fuzzy metric spaces which is an improvement over the corresponding concept recently introduced by Shukla et al. [Fuzzy Sets and system. 350 (2018) 85--94]. Thereafter, we utilized our newly introduced concept to prove some existence and uniqueness theorems in $\mathcal{M}$-complete fuzzy metric spaces. Our results extend and generalize the corresponding results of Shukla et al.. Moreover, an example is adopted to exhibit the utility of newly obtained results.

The calculation of the standard enthalpies of vaporization, sublimation and solvation of organic molecules is presented using a common computer algorithm on the basis of a group-additivity method. The same algorithm is also shown to enable the calculation of their entropy of fusion as well as the total phase-change entropy of liquid crystals. The present method is based on the complete break-down of the molecules into their constituting atoms and their immediate neighbourhood; the respective calculations of the contribution of the atomic groups by means of the Gauss-Seidel fitting method is based on experimental data collected from literature. The feasibility of the calculations for each of the mentioned descriptors was verified by means of a 10-fold cross-validation procedure proving the good to high quality of the predicted values for the three mentioned enthalpies and for the entropy of fusion, whereas the predictive quality for the total phase-change entropy of liquid crystals was poor. The goodness of fit (Q²) and the standard deviation (σ) of the cross-validation calculations for the five descriptors was as follows: 0.9641 and 4.56 kJ/mol (N=3386 test molecules) for the enthalpy of vaporization, 0.8657 and 11.39 kJ/mol (N=1791) for the enthalpy of sublimation, 0.9546 and 4.34 kJ/mol (N=373) for the enthalpy of solvation, 0.8727 and 17.93 J/mol/K (N=2637) for the entropy of fusion and 0.5804 and 32.79 J/mol/K (N=2643) for the total phase-change entropy of liquid crystals. The large discrepancy between the results of the two closely related entropies is discussed in detail. Molecules, for which both the standard enthalpies of vaporization and sublimation were calculable, enabled the estimation of their standard enthalpy of fusion by simple subtraction of the former from the latter enthalpy. For 990 of them the experimental enthalpy-of-fusion values are also known, allowing their comparison with predictions, yielding a correlation coefficient R² of 0.6066.

Objective: To compare the incidence of skin abrasions caused by traditional straight edge flip flop straps versus rolled inner seam (RIS) designs in a controlled laboratory setting using preserved fetal pig skin as a proxy for human skin.Methods: This study utilized a custom-built apparatus to apply friction from two flip flop strap designs to preserved fetal pig skin samples. Three trials were conducted for each strap design to determine the time to initial abrasion onset. A paired t-test was employed for statistical analysis.Results: The RIS design demonstrated a statistically significant delay in abrasion onset compared to the standard design across all trials (p < 0.05), indicating a gentler interaction with the skin.Conclusion: The RIS strap design may offer a beneficial alternative to traditional straps by reducing the friction that can lead to skin abrasions, suggesting a potential to decrease the risk of dorsal foot ulcers. Further studies involving human subjects are warranted to validate these findings in a real-world context.Keywords: Flip flop strap design, skin abrasions, dorsal foot ulcers, footwear design, developing countries, diabetic foot care.

The calculation of the vapour pressure of organic molecules at 298.15K is presented using a commonly applicable computer algorithm based on the group-additivity method. The basic principle of this method rests on the complete breakdown of the molecules into their constituting atoms, further characterized by their immediate neighbour atoms. The group contributions are calculated by means of a fast Gauss-Seidel fitting algorithm using the experimental data of 2036 molecules from literature. A ten-fold cross-validation procedure has been carried out to test the applicability of this method, which confirmed excellent quality for the prediction of the vapour pressure, expressed in log(pa), with a cross-validated correlation coefficient Q2 of 0.9938 and a standard deviation  of 0.26. Based on these data, the molecules' standard Gibbs free energy G°vap has been calculated. Furthermore, using their enthalpies of vaporization, predicted by an analogous group-additivity approach published earlier, the standard entropy of vaporization S°vap has been determined and compared with experimental data of 1129 molecules, exhibiting excellent conformance with a correlation coefficient R2 of 0.9598, a standard error  of 8.14 J/mol/K and a medium absolute deviation of 4.68%.

Abstract: Background: The diagnosis of nasal airway disorders relies on questionnaires, subjective data, and objective data. Interpretation of objective data obtained from measurement technology is not well understood by providers and researchers who use the equipment to test nasal airway function, justifying the need to cre-ate a new clinical tool. The Davidson Airway Function & Nasal Evaluation (DAFNE) Scoring System is a web-based scoring system that allows healthcare providers (MDs, PAs, PTs, APRNs, DMDs, DDSs, SLPs, and DCs) and researchers who treat nasal obstruction and breathing disorders to make more accurate diagnostic decisions, select the appropriate treatment for individualized patient care, monitor treatment progression and outcomes, and show how to approach a collaborative care model with other healthcare professionals. The current technologies, such as 4-phase rhinomanometry, use a simple approach that relies on a measurement tracing intersecting a color-coded y-axis on a four-quadrant graph with diagnostic numeric data output de-scribing nasal airflow and resistance. This is a good source of biofeedback demonstrating abnormal nasal breathing patterns but lacks interpretation guidelines to describe the severity of disease. The more sophisti-cated proprietary DAFNE approach uses multiple parameters which include airflow restriction, speed, vol-ume, and patient characteristics to identify patients’ disease progression much more accurately. Additionally, it explains how to segregate patients into appropriate treatment options which minimizes risks and compli-cations associated with sleep and breathing disorders while improving patient outcomes. Methods: Electronic searches of PubMed, MEDLINE, EMBASE Cochrane Library, and Scopus of publications between 1988-2022 were necessary to identify studies which determined the ranges of nasal function measurement parameters among three airway measurement technologies used in writing the DAFNE Score algorithm. The performance of DAFNE was evaluated compared to the research data and patient demographics used in previous studies. Results: By using primary outcome measurements from the literature, we were able to create a reliable, re-peatable, and validated tool to facilitate patient identification, treatment stratification, and collaboration for sleep and nasal breathing dysfunction. Subsequently, we found DAFNE could be used to identify the appro-priateness of a sleep study. Conclusions: DAFNE Scoring System has demonstrated the ability to detect high risk patients in the pediatric and adult populations susceptible of sleep apnea and breathing dysfunction needing a sleep study and treatment to improve nasal airway function and sleep. DAFNE Scoring System should be used as an adjunct tool in routine clinical practice and research to further understand the technol-ogy data output, identify patients at risk, stratify treatment options, progress, and stabilization after treatment, and how to collaborate with other healthcare providers to improve patient outcomes.

Background: Although the link between environmental lead exposure and several patterns of cardiovascular disease (CVD) has been reported, its association with silent myocardial infarc-tion (SMI) has not been explored. We aimed to assess the association between blood lead levels (BLL) and risk of SMI. Methods: This analysis included 7283 (mean age 56.1±2.52 years, 52.5% women) participants from the Third National Health and Nutrition Examination Survey who were free of clinical CVD. Ascertainment of BLL done using graphite furnace atomic absorption spectrophotometry. SMI defined as ECG evidence of MI without history of MI. Multivariable lo-gistic regression analysis was used to examine the association between SMI and BLL. Results: SMI was detected in 120 participants corresponding to an unweighted prevalence of 1.65%. Par-ticipants with higher levels of BLL had higher prevalence of SMI (0.4%, 0.9%, and 2.4% across BLL tertiles; p-value

A systematic study has been conducted on barbiturate complexes of all five alkali metals Li–Cs prepared from the metal carbonates or hydroxide in aqueous solution without other potential ligands present, varying the stoichiometric ratio of metal ion to barbituric acid (BAH). Eight polymeric compounds (two each for Na, K, and Rb and one each for Li and Cs) have been characterised by single-crystal X-ray diffraction. All contain some combination of barbiturate anion BA− (necessarily in a 1:1 ratio with the metal cation M+), barbituric acid, and water. All organic species and water molecules are coordinated to the metal centres via oxygen atoms as either terminal or bridging ligands. Coordination numbers range from 4 (for the Li complex) to 8 (for the Cs complex). Extensive hydrogen bonding plays a significant role in all the crystal structures, almost all of which include pairs of N–H…O hydrogen bonds linking BA− and/or BAH components into ribbons extending in one dimension. Factors influencing the structure adopted by each compound include cation size and reaction stoichiometry as well as hydrogen bonding.

We first explore negative-ion formation in fullerenes C44, C60, C70, C98, C112, C120, C132 and C136 through low-energy electron elastic scattering total cross sections calculations using our Regge-pole methodology. Water oxidation to peroxide and water synthesis from H₂ and O₂ are then investigated using the anionic catalysts C44ˉ to C136ˉ. The fundamental mechanism underlying negative-ion catalysis involves hydrogen bond strength-weakening in the transition state. DFT transition state calculations found C60ˉ numerically stable for both water and peroxide synthesis, C100ˉ increases the energy barrier the most and C136ˉ the most effective catalyst in both water synthesis and oxidation to H2O2.

Pulmonary infections with Mycobacterium avium occur in susceptible individuals following exposure to the bacterium in the environment, where it often persists in biofilms. Many methods have been used to generate biofilms of M. avium, and it is unknown whether different approaches generate similar structures and cell phenotypes. To make a parallel comparison of in vitro biofilm ultrastructure, extracellular matrix (ECM) composition, and drug susceptibility of biofilm resident bacteria, we used two published methods to generate M. avium biofilms: four week incubation in M63 medium or 24 hour exposure to dithiothreitol (DTT). Scanning electron microscopy revealed differences in biofilm ultrastructure between the two methods, including variation in appearance of ECM materials and morphology of resident cells, while light microscopy and staining with calcofluor white indicated that both biofilms contained polysaccharides characteristic of cellulose. Measuring susceptibility of biofilms to degradation by enzymes suggested differences in structurally important ECM molecules, with DTT biofilms having important protein and, to a lesser extent, cellulose components, and M63 biofilms having moderate protein, cellulose, and DNA components. Both biofilms conferred resistance to the bactericidal effects of amikacin and clarithromycin, with resident cells being killed at &gt;10-fold lower rates than planktonic cells at almost all concentrations. Though these comparisons indicate differences in biofilm responses by M. avium under differing conditions, they also suggest common features of biofilm formation including cellulose production and antimicrobial resistance.

The digital model of airborne frequency selective surface radomes (AFSSRs) is the basis of design, simulation analysis, manufacturing, and other related research of AFSSRs. This paper proposes a rapid modeling method of AFSSRs based on dynamic customizable primitives. Firstly, a layered digital model construction scheme of AFSSR is presented based on the typical radome wall structure. Then, according to the characteristics of various surface configurations and complex wireframe information of AFSSRs, the dynamic primitives are raised to express the boundary and contour information of all kinds of radomes. Focusing on the undevelopable characteristics of the aero-dynamic shape surface of the AFSSR, the arrangement solution and mapping method for frequency selective elements on undevelopable surfaces are proposed. Furthermore, the imple-mentation logic of this method on the creation of each layer model and the assembly of the whole machine model is introduced. Finally, according to this method, a rapid modeling system (RMS) is established, and the modeling effect and efficiency of the RMS are demonstrated and compared, which verifies the feasibility and effectiveness of this method.

The current global business landscape demands an acute commitment of international businesses’ sustainable practices to attain a global sustainability agenda. This paper examines the intricate nexus of Multinational Enterprises' (MNEs) Corporate Social Responsibility (CSR) practices, particularly environmental innovation, business ethics, CSR reporting and their environmental performance, social performance, as well as the influence of their alignment with the United Nations Sustainable Development Goals (SDGs). Using data from Refinitiv Eikon workspace for 91 MNEs from the Middle East and North Africa (MENA) region as a point of the study, the Partial Least Squares Structural Equation Modeling (PLS-SEM) results underline the potential and significant involvement of MNEs in sustainable development shaping, especially in developing and emerging countries. The harmonization and convergence of MNEs’ CSR practices and their adoption of the SDGs emerges as a pivotal approach to enhance MNEs’ contribution to a global development and sustainability agenda.

A survey of the trends in metal-ligand coordination and hydrogen bonding has been carried out on complexes of singly deprotonated cyanuric acid CY− and alkaline earth metals, synthesised from aqueous solution and characterised by X-ray crystallography. Involvement of cyanurate in the metal coordination increases from Mg through Ca and Sr to Ba relative to coordination by water, in parallel with the increasing ionic radius and coordination number. The incidence of bridging of metal centres by both water and cyanurate also increases in this series. The Mg complex contains hexaaqua-coordinated cations, uncoordinated CY− anions, and additional water molecules. Ca and Sr complexes feature polymeric chains of coordinated metal ions, the Ca complex with uncoordinated anions and the Sr complex with all potential ligands coordinated. The Ba complex has a two-dimensional coordination network. Extensive hydrogen bonding plays a key role in generating a three-dimensional network in all four structures. The competition between cyanurate and water for coordination to the alkaline earth metal cations, and that between coordination and hydrogen bonding propensities of the cyanurate anion, appear to be finely balanced, with the structural outcomes depending on the relative sizes and degrees of hardness of the four cations of the group.

Estimating parameters for multiple datasets can be time consuming, especially when the number of datasets is large. One solution is to sample from multiple datasets simultaneously using Bayesian methods such as adaptive multiple importance sampling (AMIS). Here we use the AMIS approach to fit a von Misses distribution to multiple datasets for wind trajectories derived from a Lagrangian Particle Dispersion Model driven from a 3D meteorological data. The primary objective is to characterise the uncertainties in wind trajectories in a form that can be used as inputs for predictive models of wind-dispersed insect pests and pathogens of agricultural crops for use in evaluating risk and in planning mitigation actions. Our results show that AMIS can significantly improve the efficiency of parameter inference for multiple datasets.

High concentrations of Na⁺ or [Co(NH₃)₆]³⁺ can induce the B to Z conformational transition in alternating (dC-dG) oligo and polynucleotides. The use of short DNA oligomers (dC-dG)₄ and (dm⁵C-dG)₄ as models can allow a thermodynamic characterization of the transition. Both form right handed double helical structures (B-DNA) in standard phosphate buffer with 115 mM Na⁺ at 25 ^oC. However, at 2.0 M Na⁺ or 200 mM [Co(NH₃)₆]³⁺, (dm⁵C-dG)₄ assumes a left handed double helical structure (Z-DNA) while the unmethylated (dC-dG)₄ analogue remains right handed under those conditions. We have previously demonstrated that the enthalpy of the transition at 25 ^oC for either inducer can be determined using isothermal titration calorimetry (ITC) [Ferreira, J. M. & Sheardy, R. D., Biophys. J. 2006, 91, 1–7]. Here, ITC is used to investigate the linkages between temperature, water activity and DNA conformation. We found that the determined enthalpy for each titration varied linearly with temperature allowing determination of the heat capacity change (DC_p) between the initial and final states. As expected, the DC_p values were dependent upon the cation (i.e. Na⁺ vs [Co(NH₃)₆]³⁺) as well as the sequence of the DNA oligomer (i. e., methylated vs unmethylated). Osmotic stress experiments were carried out to determine the gain or loss of water by the oligomer induced by the titration. The results are discussed in terms of solvent accessible surface areas, electrostatic interactions and the role of water.

This research work deals with the modeling and control of hybrid photovoltaic (PV) - Wind micro-grid using Quasi Z-Source inverter. This inverter provides better buck/boost characteristics, able to regulate the phase angle output, less harmonic content, no requirement of the filter and has high power performance characteristics over conventional inverter as major benefits. A SEPIC converter as dc-dc switched power apparatus is employed for maximum power point tracking (MPPT) functions which provides high voltage gain throughout the process. Moreover, a modified power ratio variable step (MPRVS) based perturb & observe (P&O) method has been proposed in the PV MPPT action which forces the operating point close to maximum power point (MPP). Practical responses justify the performance of hybrid PV-Wind micro-grid with Quasi Z-Source inverter structure.

The calculation of the surface tension of ordinary organic and ionic liquids, based on a computer algorithm applying a refined group-additivity method, is presented. The refinement consists of a complete breakdown of the molecules into their constituting atoms, further distinguishing them by their immediate neighbour atoms and bond constitution. The evaluation of the atom-groups’ contributions was carried out by means of a fast Gauss-Seidel fitting method founded upon the experimental data of 1895 compounds from literature. The result has been tested for plausibility using a 10-fold cross-validation (cv) procedure. The direct calculation and the cv test proved the applicability of the present method by the close similarity and excellent goodness of fit R2 and Q2 of 0.9023 and 0.8821, respectively. The respective standard deviations are ±2.01 and ±2.16 dyn/cm. Some correlation peculiarities have been observed in a series of ordinary and ionic liquids with homologous alkyl chains which are illustrated and discussed in detail, exhibiting the limit of the present method.

To mitigate lithium dissolution and polysulfide shuttle effect phenomena in high energy lithium sulfur batteries (LISBs), a conductive, flexible, and easily modified polymer composite layer was applied on the anode. The polymer composite layer includes polyaniline and functionalized graphite. The electrochemical behavior of LISBs was studied by galvanostatic charge/discharge tests from 1.7 to 2.8 V up to 90 cycles and via COMSOL Multiphysics simulation software. No apparent overcharge occurred during the charge state, which suggests that the shuttle effect of polysulfides was effectively prevented. The COMSOL Multiphysics simulation provides a venue for optimal prediction of the ideal concentration and properties of the polymer composite layer to be used in the LISBs. The testing and simulation results determined that the polymer composite layer diminished the amount of lithium polysulfide species and decreased the amount of dissolved lithium ions in the LISBs. In addition, the charge/discharge rate of up to 2.0 C with a cycle life of 90 cycles was achieved. The knowledge acquired in this study was important not only for the design of efficient new electrode materials, but also for understanding the effect of the polymer composite layer on the electrochemical cycle stability.

Recently, Shehata et al. [37] introduced the r+1Rs(B;C; z) matrix function and established some properties. The aim of this study established to devote and derive certain basic properties including analytic properties, recurrence matrix relations, dierential properties, new integral representations, k- Beta transform, Laplace transform, fractional k-Fourier transform, fractional integral properties, the k-Riemann{Liouville and k-Weyl fractional integral and derivative operators an extended version of r+1Rs;k matrix function. We establish its relationships with other well known special matrix functions which have some particular cases in the context of three parametric Mittag-Leer matrix function, k- Konhauser and k-Laguerre matrix polynomials. Finally, some special cases of the established formulas are also discussed.

A compact 2-DOF (two degrees of freedom) piezoelectric-driven platform for 3D cellular bio-assembly systems has been proposed based on “Z-shaped” flexure hinges. Multiple linear motions with high resolution both in x and y directions are achieved. The “Z-shaped” flexure hinges and the parallel-six-connecting-rods structure are utilized to obtain the lowest working stress while compared with other types of flexure hinges. In order to achieve the optimized structure, matrix-based compliance modeling (MCM) method and finite element method (FEM) are used to evaluate both the static and dynamic performances of the proposed 2-DOF piezoelectric-driven platform. Experimental results indicate that the maximum motion displacements for x stage and y stage are lx=17.65 μm and ly=15.45 μm, respectively. The step response time for x stage and y stage are tx=1.7 ms and ty =1.6 ms, respectively.