Photoplethysmography (PPG) is widely utilized in wearable healthcare devices due to its convenient measurement capabilities. However, the unrestricted behavior of users often introduces artifacts into the PPG signal. As a result, signal processing and quality assessment play a crucial role in ensuring that the information contained in the signal can be effectively acquired and analyzed. Traditionally, researchers have discussed signal quality and processing algorithms separately, with individual algorithms developed to address specific artifacts. In this paper, we propose a quality-aware signal processing mechanism that evaluates incoming PPG signals using signal quality index (SQI) and selects the appropriate processing method based on the SQI. Unlike conventional processing approaches, our proposed mechanism recommends processing algorithms based on the quality of each signal, offering an alternative option for designing signal processing flows. Furthermore, our mechanism achieves a favorable trade-off between accuracy and energy consumption, which are the key considerations in long-term heart rate monitoring.

In the industrial sector, the financial gain is generally considered at the cost of environmental degradation. The environmental protection and economic benefit are common conflicting objectives in many optimization problems. In any multi-criteria problem, the most challenging part is to optimize the conflicting goals. But if these objectives become non-conflicting, then the problem can be solved with ease. This paper is all about minimizing the environmental impact of industrial processes while maximizing the net economic benefit. There is a general misconception of linking the environmental protection with a financial loss. This is not always true; the Eco-Efficiency or Cleaner Production Technology (CPT) is a perfect example to disprove this notion. Economics of CPT regarding water savings for the textile-processing sector in Pakistan has been analyzed in this paper. Changes in water use before and after the implementation of water conserving technologies in the textile sector of Pakistan from a study conducted by the Cleaner Production Institute (CPI) are utilized to perform a cost-benefit analysis. Direct financial benefits that could be achieved through the application of these technologies are presented only. Other environmental benefits, though not described here, are of no less importance. The study results reveal that very high potential of water savings exists for most of the investments on CPT.

Nature-based solutions (NbS) are increasingly recognised for their potential to address both the climate and biodiversity crises. These outcomes are interdependent, and both rely on the capacity of NbS to support and enhance the health of an ecosystem: its biodiversity, the condition of its abiotic and biotic elements, and its capacity to function normally despite environmental change. However, while understanding of ecosystem health outcomes of nature-based interventions for climate change mitigation is growing, the outcomes of those implemented for adaptation remain poorly understood with evidence scattered across multiple disciplines. To address this, we conducted a systematic review of the outcomes of 109 nature-based interventions for climate change adaptation using 33 indicators of ecosystem health across eight broad categories (e.g. diversity, biomass, ecosystem functioning and population dynamics). We showed that 88% of interventions with positive outcomes for climate change adaptation also reported measurable benefits for ecosystem health. We also showed that interventions were associated with a 67% average increase in local species richness. All eight studies that reported benefits in terms of both climate change mitigation and adaptation also supported ecosystem health, leading to a triple win. However, there were also trade-offs, mainly for forest management and creation of novel ecosystems such as monoculture plantations of non-native species. Our review highlights two major limitations of research to date. First, only a limited selection of metrics are used to assess ecosystem health and these rarely include key aspects such as functional diversity and habitat connectivity. Second, taxonomic coverage is poor: 67% of outcomes assessed only plants and 57% did not distinguish between native and non-native species. Future research addressing these issues will allow the design and adaptive management of NbS to support healthy and resilient ecosystems, and thereby enhance their effectiveness for meeting both climate and biodiversity targets.

Stresses due to drought and high soil salt content are the most severe threats to global rice pro-duction, causing a significant decline in rice yield. Therefore, this study examined the effects of treatment with various plant extracts on the stresses on rice plants associated with drought and high salinity. Additionally, this study examined various physiological and biochemical parameters such as growth, photosynthetic activity, chlorophyll content, and lipid peroxidation in rice plants after treatment with selected plant extracts under drought and salt stress conditions. Out of the eleven extracts tested, four extracts, namely soybean leaf, soybean stem, Chinese chive, and onion extracts, were found to effectively reduce drought stress. A reduction of only 24-37% in shoot fresh weight was observed in rice plants under drought stress that were treated with these ex-tracts compared to the 78% reduction observed in control plants. In addition, rice plants under salt stress which were treated with soybean leaf, soybean stem, moringa (Moringa oleifera), and Undaria pinnatifida extracts were observed to have lower reductions in shoot fresh weight (3-23%) com-pared to the control plants (43%). The effectiveness varied with the concentrations of the plant ex-tracts. Water content was higher in the rice plants treated with extracts than in the control plants after 6 days of drought and salt stress, but not after 4 days of drought and salt stress. Although photosynthetic efficiency (Fv/Fm) and electron transport rate (ETR), and the content of pigments (chlorophyll and carotenoid) varied based on the types and levels of stress and the extracts that the rice plants were treated with, generally photosynthetic efficiency and pigment contents were higher in the treated rice compared to control plants than in the control plants. Reactive oxygen species (ROS) such as the superoxide radical, hydrogen peroxide (H2O2), and malondialdehyde (MDA) levels increased as the duration of the period of stress increased. ROS and MDA levels were lower in the treated rice compared to control plants. Proline and soluble sugar accumulation also increased as the duration of the stressperiod increased. However, proline and soluble sugar ac-cumulation were lower in the treated rice compared to control plants. Generally, all the parame-ters investigated in this study were similar regardless of the plant extract used for treating the rice plants. Thus, extracts found to be effective in this study can be used to alleviate the adverse effects of stress on rice crops associated with drought and high salinity soil.

This paper provides an overview of the new CPAM Project on Additive Manufacturing (AM) in design and simulation, focusing on topology & lattice structure optimization for a light-weighting advantage. This industry/academia collaboration project aims to utilize existing hardware and software tools, and investigate the practical limits of the technologies, providing eventual guidelines for general use. This will provide a solid foundation for the practical use of metal AM optimized solid and latticed structures especially for Ti6Al4V parts. Two case studies are demonstrated here, one a purely topology optimized design, and one also incorporating lattice optimized design, both from Ti6Al4V and load-bearing components, to be utilized in the Nelson Mandela University (NMU) Eco-Car Project in competition, late in 2018. This paper presents the Design for Additive Manufacturing (DfAM) process, the challenges met iro applying a DfAM design mindset, and a unique final voxel-based smoothing step finishing off the design process. Detailed structural integrity assessment of these parts are included - the question remains: can Additive Manufacturing help win the race?

Recently, there appeared in this journal (Beh and Lombardo \textbf{2022}, {\it Symmetry}, 14, 1103) a paper that showed how to perform a correspondence analysis on a two-way contingency table where Bowker's statistic lies at the numerical heart of this analysis. Thus, we showed how this statistic can be used to visually identify departures from perfect symmetry. Interestingly, Bowker's statistic is a special case of the symmetry-version of the Cressie-Read family of divergence statistics. Therefore, this paper presents a new framework for visually assessing departures from perfect symmetry using a second-order Taylor series approximation of the Cressie-Read family of divergence statistics.

Obesity is a global public health problem and the environment as its major determinant. To identify interventions an evidence base is warranted. To this aim we investigate the relationship between the consumption of foods and eating locations (like home, school/work and others) in British adolescents, using data from the UK National Diet and Nutrition Survey Rolling Program (2008–2012 and 2013-2016). Cross-sectional analysis of 62,523 food diary entries from this nationally representative sample then focused on foods contributing up to 80% total energy to the daily adolescent´s diet. Correspondence Analysis (CA) was first used to generate food-location relationship hypotheses and Logistic Regression (LR) to quantify the evidence in terms of odds ratios and formally test those hypotheses. The less-healthy foods that emerged from CA were chips, soft drinks, chocolate and meat pies. Adjusted Odds Ratios (99% CI) for consuming specific foods at a location “Other” than home (H) or school/work (S) in the 2008-12 survey sample were: for soft drinks 2.8 (2.1 to 3.8) vs. H and 2.0 (1.4 to 2.8) vs. S; for chips 2.8 (2.2 to 3.7) vs. H and 3.4 (2.1 to 5.5) vs. S; for chocolates 2.6 (1.9 to 3.5) vs. H and 1.9 (1.2 to 2.9) vs. S; and for meat pies 2.7 (1.5 to 5.1) vs. H and 1.3 (0.5 to 3.1) vs. S. These trends were confirmed in the 2013-16 survey sample. Interactions between location and BMI were not significant in either sample. In conclusion, our study showed that adolescents are more likely to consume specific less-healthy foods at locations away from home and school/work, irrespective of BMI. Such locations include leisure places, food outlets and “on the go”, hence public health policies to discourage less-healthy food choices in these locations is warranted for all adolescents.

Erosion caused by the repeated impact of particles on a substance surface is a usual wear method resulting in gradual and continual loss of objects. It is a crucial problem in several modern industries because their surfaces are frequently subjected to destructive erosive situations. Polymers and their hybrid materials include several applications to be used as a coating in the form of powder for different applications. This review paper aims to provide extensive information on the erosion behavior of thermoset and thermoplastic neat resin and their hybrid materials composites. Focus is specifically paid to highlight the influence of properties of selected materials, impingnation parameters such as incident Angle of erodent, impact velocity of erodent, erodent nature, and the erosion mechanism. The review further extends the information about the erosion techniques and numerical simulation methods used for wear studies of surfaces. An investigation has been carried out for researchers to explore the selection of materials and methods in terms of conditions and parameters to meet the current and future needs and challenges for the protection of surfaces of the advanced industries. During review according to the findings achieved from the literature of the past fifty years, it has been noted that the thermoplastic nature of the composite is a key component to determine the anti-wear properties, the composites with lower glass transition, higher ductility, and greater crystallinity can provide better protection to erosion in advance surface applications.

Objective: To determine demographic predictors and comorbidities in hospitalized children with conduct disorder. Methods: A retrospective analysis was performed using Nationwide Inpatient Sample (2012–2014). All patients were ≤18 years and cases with primary diagnosis of conduct disorder (N = 32345) and a comparison group with another psychiatric diagnosis (N = 410,479) were identified using ICD-9-CM diagnosis codes. A logistic regression model was used to generate the Odds Ratio (OR) between both groups. Results: Children <11 years old have five times greater chances of admission for conduct disorder than adolescent (OR 5.339). African American males are more likely to be admitted for conduct disorder. Children with conduct disorder from low-income families have a 1.5 times higher likelihood for inpatient admission compared to high-income families. These children have about eleven times higher odds of comorbid psychosis (OR 11.810) and seven times for depression (OR 7.093) compared to the comparison group. Conclusion: Conduct disorders are more debilitating for children and families than many providers realize. African American male under 11 years is at the highest risk for inpatient management for conduct disorder. These patients have a higher risk of comorbid psychosis and depression which may further deteriorate the severity of illness and require acute inpatient care.

Visual data on the geographic distribution of carbon storage helps policy maker to formulate countermeasures on global warming. However, Taiwan, as an island showing diversity in climate and topography, had lacked valid visual data in distribution of forest carbon storage between the last to forest surveys (1993-2015). This study established a model to achieve an estimation that capable to demonstrate the distribution of forest carbon storage. This model uses land use, stand morphology, carbon conversion coefficient databases accordingly for 51 types of major forest in Taiwan. An estimation on 2006 was conducted and shows an overall carbon storage of 165.65 Mt C, with forest carbon storage per unit area of 71.56 t C ha–1, where natural forests and plantations respectively contributed of 114.15 Mt C (68.9%) and 51.50 Mt C (31.1%). By assuming no change in land use type, the carbon sequestration from 2006 to 2007 by the 51 forest types was estimated to be 5.21 Mt C yr–1 using historical tree growth and mortality rates. The result reflects the reality of the land use status and event of coverage shifting with time by combining to the two forest surveys in Taiwan.

This work aimed to study the thermal and crystalline properties of poly (1,4-phenylene sulfide)@carbon char nanocomposites. Coagulation-processed nanocomposites of polyphenylene sulfide were prepared using synthesized mesoporous nanocarbon of coconut shell as reinforcement. The mesoporous reinforcement was synthesized using a facile carbonization method. The investigation of the properties of nanocarbon was done by SAP, XRD, and FESEM analysis. The research was further propagated via the synthesis of nanocomposite by the addition of characterized nanofiller into poly (1,4-phenylene sulfide) at five different combinations. The coagulation method was utilized for the nanocomposite formation. The obtained nanocomposite was analyzed using FTIR, TGA, DSC, and FESEM analysis. The BET surface area and average pore volume of bio-carbon prepared from coconut shell residue were calculated to be 1517 m2/g and 2.51 nm respectively. The addition of nanocarbon to poly (1,4-phenylene sulfide) has led to an increase in thermal stability and crystallinity up to 6% loading of filler. The minimum achievable glass transition temperature is for 6 % doping of filler into the polymer matrix. It was established that the thermal, morphological, and crystalline properties have been tailored by synthesizing their nanocomposites with mesoporous bio-nanocarbon obtained from coconut shells. So, the loading of filler into poly (1,4-phenylene sulfide) can be optimized to enhance its thermoplastic properties for surface applications.

This paper is a response to the EPR paper titled: "Can quantum-mechanical description of physical reality be considered complete?", published in Physical Review in 1935. A quantum-mechanical (QM) measurement function describes a distribution of local results, while each empirical measurement process produces one result as exact as allowed by a measuring instrument calibrated to a non-local unit standard. Repeating these empirical measurements produces a Gaussian distribution of measurement results. The QM and empirical measurement result distributions can be compared. To precisely compare a QM measurement function describing a distribution of eigenvectors to a distribution of repetitive empirical measurement results, it is necessary to determine, by calibration, the precision of the eigenvectors to the same standard as the empirical results, because each eigenvector evidences uncertainty relative to a standard. When the calibration process is recognized as formal as well as empirical, QM measurement function results and metrology measurement process results are unified.

This paper is a response to the EPR paper titled: "Can quantum-mechanical description of physical reality be considered complete?", published in Physical Review in 1935. A quantum-mechanical (QM) measurement function describes a distribution of local results and each empirical measurement process produces one result as exact as allowed by a measuring instrument calibrated to a non-local unit standard. Repeating these empirical measurements produces a bell shaped distribution of measurement results. Each of these distributions can be compared to the other. To precisely compare a QM measurement function describing a distribution of eigenvectors to a distribution of repetitive empirical measurement results, it is necessary to determine, by calibration, the precision of the eigenvectors to the same standard as the empirical results, because each eigenvector evidences uncertainty relative to a standard. When the calibration process is recognized as formal as well as empirical, QM measurement function results and metrology measurement process results are unified.

Automobile industries worldwide extensively use organic solvents. Yet, limited evidence examined the health and safety in handling these solvents, which can only be assured if workers have appropriate knowledge and demonstrate safe practices. A cross-sectional study was conducted to explore the knowledge and practice among workers who are involved with handling organic solvents in the automobile industry in the largest most urban district in Brunei Darussalam. Qualitative data were sought from open-ended questions; observations and pictorial evidence through still photographs. Quantitative analysis showed that 75% of the workers practice reading labels, 94.1% use fully covered clothes, 82.4% wear gloves and 98.5% practice proper hand washing as well as 98.5% cover container lids. The qualitative analysis illustrated workers have general knowledge of materials containing solvents but did not identify the exact solvents, the harmful effects of the solvents, pathophysiology and harmful effects on specific body systems. Health and safety were practiced albeit not consistent. Health and Safety Authorities in Brunei Darussalam must review and enforce specific policies on use of organic solvents so that they can be practiced consistently and safely in automobile industries. Cooperation and collaboration in adhering to the policies are mandatory to ensure health and safety at work.

This paper studies sequential quantum games under the assumption that the moves of the players are drawn from groups and not just plain sets. The extra group structure makes possible to easily derive some very general results, which, to the best of our knowledge, are stated in this generality for the first time in the literature. The main conclusion of this paper is that the specific rules of a game are absolutely critical. The slightest variation may have important impact on the outcome of the game. It is the combination of two factors that determine who wins: (i) the sets of admissible moves for each player, and (ii) the order of moves, i.e., whether the same player makes the first and the last move. Quantum strategies do not a priori prevail over classical strategies. By carefully designing the rules of the game the advantage of either player can be established. Alternatively, the fairness of the game can also be guaranteed.

The kiwiberry is a trendy variety that shows a high demand for consumption but presents commercialization challenges due to its short life. The purpose of this study is to compare the effects of edible alginate coatings in prolonging the shelf life of this fruit. Two different forms were tested (coarse emulsions(C) and nanoemulsions(N)) and the effects of two different coating application techniques (spraying(S) and dipping(D)) were tested. Additionally, the use of Vis-NIR for quality monitorization was assessed as well. Fruits were treated with ten different treatments, using the following base formulations:Alginate(AL) 2%(w/v) enriched with eugenol(Eug) and citral(Cit) at minimum inhibitory concentrations (0.10% and 0.15%) and double MIC. Samples were taken from cold storage (0° C), at 2 and 4 weeks. For fruit quality evaluation, colour analysis, firmness, soluble solids content, dry matter and weight loss were performed. During storage, the colour and SSC parameters increased. Firmness decreased over time.Weight loss was the parameter with higher significant differences, increasing over time and more pronounced in treatments with higher essential oils components. This study suggests that AL-S, AL-D, AL-Cit 0.15+Eug0.1-N-S, AL-Cit0.15+Eug0.1-N-D and AL-Cit0.15+Eug0.1-C-D can preserve kiwiberries quality. Moreover, we verify that the Vis-NIR spectral analysis could be beneficial for performing coatings discrimination.

The aim of this study was to synthesize and characterize a novel Methacrylate- functionalized Calcium Phosphate (MCP) used as a bioactive compound for innovative dental composites. The characterization was accomplished by Attenuated Total Reflectance Fourier-Transform Infrared Spectroscopy (ATR-FTIR), X-Ray Diffraction Analysis (XRDA), Scanning Electron Microscopy (SEM), and EnergyDispersive Spectroscopy (EDS). The incorporation of MCP as a bioactive filler in esthetic dental composite formulations and the ability of MCP containing dental composites to promote precipitation of hydroxyapatite (HAp) on the surfaces of those dental composites was explored. The translucency parameter, depth of cure, degree of conversion, ion release profile, and other physical properties of composites were studied with respect to the amount of MCP added to the composites. Composites containing 3 Wt.%, 6 Wt.%, and 20 Wt.% MCP were evaluated at 7, 14, and 21 days. The progress of surface precipitation of hydroxyapatite on MCP-containing dental composites was studied by systematically increasing the MCP content in the composite and the time of specimen storage in Dulbecco’s phosphate-buffered solution with calcium and magnesium. It was found that there was a direct correlation between the percentage of MCP in a composite formulation, the amount of time the specimen was stored in PBS, and the deposition of hydroxyapatite on the composite’s surface

The electromagnetic inference is an issue from decades, where working for a better shielding material is still on-going. The purpose of this study is to review the existing methods in the formation of graphene, metal and polymer-based composites. Study indicates that in graphene and metal-based composites, the utilization of alternating deposition method showed the highest shielding effectiveness, whereas, in polymer-based composite, the utilization of chemical vapor deposition method showed highest shielding effectiveness. However, this review reveals that still there is a gap in the literature in terms of the selection of the method. Although there are various available methods which researchers adopt as per their convenience, none of the studies makes a comparison of the methods to form a similar composite. Therefore, as a future gap researcher needs to adopt various methods to form a single composite and then make a comparison of shielding effectiveness. This act will be useful for future researchers to select the appropriate method.

Change orders have received considerable attention from researchers thus far, but none have considered pricing strategies of change orders through the interaction between general contractors and subcontractors. Previous studies found that contractors’ opportunistic bidding considering beyond-contractual reward (BCR) in the execution stage can be reduced by improving the construction management system and strengthening the supervision of contractors’ performance. However, the BCR remains in ecology of construction engineering. This study proposes an integrated evolutionary game theory-system dynamics model (ET-SD model) and simulates the pricing strategy of change orders between general contractors and subcontractors to explore the root cause of BCR phenomenon. Sensitivity analysis on the evolutionary dynamics of payoff is explored. Results reveal that change orders with BCR maintain Nash equilibrium and evolutionary stable strategy (ESS) unless changing the payoff structure between general and subcontractors’ pricing strategies. This study presents important managerial insights from the evolutionary game perspectives, nature of change orders, and payoff of the alternative.

Superantigens are unconventional antigens which recognise immune receptors outside the usual binding sites e.g. complementary determining regions (CDRs), to elicit a response within the target cell. T-cell superantigens crosslink T-cell receptors and MHC Class II molecules on antigen-presenting cells, leading to lymphocyte recruitment, induction of cytokine storms and T-cell anergy or apoptosis among many other effects. B-cell superantigens, on the other hand, bind immunoglobulin receptors on B-cells affecting opsonisation, IgG-mediated phagocytosis, and drive B-cells into apoptosis. Here, through a review of the structural basis for recognition of immune receptors by superantigens, we show that their binding interfaces share specific physicochemical characteristics when compared with other protein-protein interaction complexes. Given that antibody-binding superantigens have been exploited extensively in industrial antibody purification, these observations could facilitate further protein engineering to optimize the use of superantigens in this and other areas of biotechnology.

Implementation of novel blood-based biomarkers is desired to reduce diagnostic delay and burden for myositis patients. In this retrospective study, the potential of C-X-C motif chemokine ligand 10 (CXCL10) and growth differentiation factor 15 (GDF15) was explored in an established patient cohort diagnosed with immune-mediated necrotizing myopathy (IMNM; n=21), sporadic inclusion body myositis (IBM; n=18), polymyositis (PM; n=3), dermatomyositis (DM; n=2), and anti-synthetase syndrome (ASS; n=1), comparing with healthy controls (n=10) and patients with a hereditary neuromuscular disorder (n=14). CXCL10 and GDF15 were quantified in sera with enzyme-linked immunosorbent assays and immunolocalized in skeletal muscle tissue. In myositis patients, serum CXCL10 levels were significantly increased 9.6--fold compared to healthy and 4.2-fold compared to disease controls. Mean levels in IBM (929±658 pg/ml) were significantly higher than in IMNM (425±324 pg/ml). With the threshold set to 180pg/ml of CXCL10, myositis patients could be differentiated from healthy and disease controls with a sensitivity of 0.80 and a specificity of 0.71. Incorporating a threshold of 300 pg/ml for GDF15 reduced false negatives to two IMNM patients only. Subsets of muscle-infiltrating immune cells expressed CXCL10, and serum levels correlated with muscle inflammation grade. We propose adding circulating CXCL10 and GDF15 to the blood-based diagnostic toolkit for myositis as a valuable patient-friendly approach.

The average working person can spend between 35-60 hours a week in the workplace, making it an influential place for mental well-being while also being a place for socio-economic contribution. Workplace incivility can diminish positive mental health outcomes and negatively impact work engagement through increased social anxiety. To investigate this, 118 working adults aged between 19 to 67 years old in Singapore were recruited for a survey comprising of demographics questions, the Workplace Incivility Scale, Brief DSM-5 Social Anxiety Disorder Severity Scale, Utrecht Work Engagement Scale-9 over the period of November 2022 to April 2023. Correlational, regression and mediation analysis showed workplace incivility scale scores to significantly pre-dict social anxiety after controlling for covariates, supporting our hypothesis that employees exposed to work-place incivility would have higher levels of social anxiety that mediated work engagement after controlling for age and gender. The findings here show workplace incivility to be a possible intervention target for social anx-iety to reduce negative impacts on work engagement in order to improve employee experience and retention for organizations.

The target of an antibody plays a significant role in the success of antibody-based therapeutics and diagnostics, and to an extent, that of vaccine development. This importance is focussed on the target binding site – epitope, where epitope selection as a part of design thinking beyond traditional antigen selection using whole cell or whole protein immunisation can positively impact success. With purified recombinant protein production and peptide synthesis to display limited/selected epitopes, intrinsic factors that can affect the functioning of resulting antibodies can be more easily selected for. Many of these factors stem from the location of the epitope that can affect accessibility of the antibody to the epitope at a cellular or molecular level, direct inhibition of target antigen activity, conservation of function despite escape mutations, and even non-competitive inhibition sites. Through the incorporation of novel computational methods for predicting antigen changes to model-informed drug discovery and development, superior vaccines and antibody-based therapeutics or diagnostics can now be more easily designed to mitigate failures. With detailed examples, this review highlights the new opportunities, factors and methods of predicting antigenic changes for consideration in sagacious epitope selection.

The negative impact of the modern-day lifestyle on the environment is aggravated during the COVID-19 pandemic through the increased use of single-use plastics from food takeaways to medical supplies. Similarly, the closure of food outlets and disrupted supply chains have also resulted in significant food wastage. As the pandemic rages on, the aggravation of increased waste becomes an increasingly urgent problem that threatens the biodiversity, ecosystems, and human health worldwide through pollution. While there are existing methods to deal with the organic and plastic waste, many of the solutions also cause additional problems. Increasingly proposed as a natural solution to man-made unnatural problems, there are insect solutions for dealing with the artificial and organic waste products towards a circular economy, making the use of natural insect solutions commercially sustainable. This review discusses the findings and how some of these insects, particularly the Hermetia illucens, Tenebrio molitor, and Zophobas morio, can play an increasing important role in food and plastics, with a focus on the latter.

The rise of the Internet of Things (IoT) has opened up exciting possibilities for new applications. One such novel application is the modernization of maritime communications. Effective maritime communication is vital for ensuring the safety of crew members, vessels, and cargo. The maritime industry is responsible for the transportation of a significant portion of global trade, and as such, the efficient and secure transfer of information is essential to maintain the flow of goods and services. With the increasing complexity of maritime operations, technological advancements such as unmanned aerial vehicles (UAVs), autonomous underwater vehicles (AUVs), and the Internet of Ships (IoS) have been introduced to enhance communication and operational efficiency. However, these technologies also bring new challenges in terms of security and network management. Compromised IT systems, with escalated privileges, can potentially enable easy and ready access to operational technology (OT) systems and networks with the same privileges, with an increased risk of zero-day attacks. In this paper, we first provide a review of the current state and modalities of maritime communications. We then review the current adoption of Software-Defined Radios (SDRs) and Software-Defined Networks (SDNs) in the maritime industry and evaluate their impact, as IoT enablers, on the future of maritime industry operations, safety, and security.

Background: The isoflurane minimum alveolar concentration (MAC) was measured in rats chronically treated with WIN 55,212-2. Methods: The isoflurane MAC was determined in 24 male rats from the end expiratory samples at time of tail clamping under the following conditions: without treatment (MACISO), in rats treated for 21 days with WIN 55,212-2 (MACISO+WIN55) and other group 8 days after stopping treatment for 21 days with WIN 55,212-2 (MACISO+WIN55+8D). Results: The MACISO was 1.32 ± 0.06. In the MACISO+WIN55 group the MAC increase to 1.69 ± 0.09 (28%). After 8 days stopping treatment, MAC did not decrease significantly 1.67 ± 0.07 (26%). Conclusions: The administration for 21 days of WIN 55,212-2 increases the MAC of isoflurane in rats; this effect does not disappear after 8 days of discontinuing treatment with the synthetic cannabinoid.

The effects of morphine (MOR) and dexmedetomidine (DEX) on the MAC of isoflurane were measured in rats chronically treated with the synthetic cannabinoid WIN 55,212-2 (WIN55). Methods: The MAC of isoflurane was determined in 32 male rats from expiratory samples at the time of tail clamping. The effects of morphine (MAC(ISO+MOR)) and dexmedetomidine (MAC(ISO+DEX)) on the MAC of isoflurane in untreated rats and rats treated for 21 days with WIN 55,212-2 (MAC(ISO+WIN55+MOR)) and (MAC(ISO+WIN55+DEX)) were measured. Prior to the administration of morphine and dexmedetomidine, the MAC of the isoflurane was measured in both untreated rats (MAC(ISO)) and those treated with WIN 55,212-2 (MAC(ISO+WIN55)). Results: The minimum alveolar concentration was measured as 1.32 ± 0.06 in the MAC(ISO) group and 1.69 ± 0.09 in the MAC(ISO+WIN55) group. The MAC of the MAC(ISO+MOR) group was 0.97 ± 0.02 (26% less than the control group, MAC(ISO)). MAC was measured as 1.55 ± 0.08 in the MAC(ISO+WIN55+MOR) group (8% less than the MAC(ISO+WIN55) group), 0.68 ± 0.10 in the MAC(ISO+DEX) group (48% less than the control group, MAC(ISO)), and 0.67 ± 0.08 in the MAC(ISO+WIN55+DEX) group (60% less than the MAC(ISO+WIN55) group). Conclusions: The administration of WIN 55,212-2 for 21 days increases the MAC of isoflurane in rats. The sparing effect on isoflurane of morphine decreases in rats chronically treated with the synthetic cannabinoid, WIN 55,212-2. Dexmedetomidine increases its sparing effect on the minimum alveolar concentration of isoflurane in rats chronically treated with WIN 55,212-2.

Servitization or productization, indicating evolution from product to service economy or vice-versa, can be considered as a successful strategy to gain competitiveness based on novel combination of products and services. To decrease the risks of servitization and to support the sustainable development of its main outcome, being Product Service System (PSS), it is required not only to have a clear and common understanding of the core business and processes but also to share the same definitions on (PSS) concepts as the main outcome of servitization. For this purpose, managers could be supported by abstract models with a limited number and high ratio of known concepts in the early stages of PSS development. Through an extensive literature review on this subject, followed by a structured conceptualization approach and discussions with domain experts, this paper proposes a Conceptual Model (PSS-CM). To validate the results, PSS-CM and its elements were discussed in several iterations, from both academic and industrial points of view, in the frame of a European research project. In the frame of this project, a case study was also performed to illustrate the instantiation of PSS-CM.

Many corporations have now revised their value statements to showcase their commitment to sustainable development and green business due to the pressing issues of climate and environmental damage. Despite the importance of value statements that can direct companies to achieve sustainable goals, what kind of values can be perceived as organizational orientations to sustainability remains unknown. This study explores how the general public views the inclusion of sustainable components in value statements from the listed companies in Hong Kong by using Q-sort methodology (n = 30). Analyzing the final sample of 40 value statements extracted from 27 listed companies, we identified three factors related to sustainability, namely, Empowering business process management, Empowering customer-centric excellence, and Empowering sustainable progress. This study provides an additional component to the traditional triple bottom line by suggesting that internal operation of a company is an emerging idea to understand corporate sustainability.

Background & Motivation: Stroke outcomes following revascularization therapy (intravenous thrombolysis, IVT, and/or mechanical thrombectomy, MT) depend critically on time from stroke onset to treatment. Different service configurations may prioritise time to IVT or time to MT. In order to evaluate alternative acute stroke care configurations, it is necessary to estimate clinical outcomes given differing times to IVT and MT. Method: Model using an algorithm coded in Python. This is available at https://github.com/MichaelAllen1966/stroke_outcome_algorithm. Results: We demonstrate how the code may be used to estimate clinical outcomes given varying times to IVT and MT. Conclusion: Python code has been developed and shared to enable estimation of clinical outcome given times to IVT and MT. Here we share pseudocode and links to full Python code.

(1) Background: Patella and achilles tendon injuries have become increasingly prevalent due to an increasingly active population. These injuries can cause significant dysfunction which is especially true for elite athletes. Standard B-Mode ultrasound has been useful in the diagnosis of these injuries, however, only to a limited extent. Shear wave elastography (SWE) can aid in evaluation by objectively measuring tissue stiffness. Prior studies have proven shear wave values can be used to evaluate tendon tissue noting differences in healthy versus pathologic tendons. One main limitation remains a lack of normative data for specific tendon tissues which we aim to address in this study; (2) Methods: A cross-sectional study of healthy volunteers aged 18-65 without lower extremity injury was evaluated using A Samsung RS85 Prestige ultrasound machine with a 14L-2 MHz transducer. Shear wave values were collected in a standardized manner for the patellar tendon at one location, as well as the achilles tendon at the midportion and insertional areas; (3) Results: Data for 54 healthy adult patellar and achilles tendons was collected bilaterally. The mean SWE average of the patellar tendon (P1-P3) for all subjects was 96.3 +/- 10.9 kPA. A higher BMI was correlated with a decrease in patella tendon kPA and the mean PT1 was higher for males compared to females (adjusted mean 96.4 kPA for males and 88.5 kPA for females, mean difference = 7.9 kPA; P = 0.009). The mean SWE average of the insertional Achilles (AT1-AT3) for all subjects was 101.7 +/-16.2 kPA and for the midportion achilles (MTP1-MTP5) was 145.6 +/- 18.8 kPA. There was a decrease in kPA for insertional Achilles measurements in those with a higher BMI, but this did not reach statistical significance (p=.12); (4) Conclusion: This study provides normative SWE values for the patella and achilles tendon using the Samsung RS85. These values can be used for comparison to pathological tissue by means of the same examination protocol to better understand tendon degeneration. Further studies are warranted as to how SWE can be applied to the diagnosis of tendinopathy, partial and full-thickness tears, and response to treatment.

2014 marked the first emergence of avian influenza A(H5N8) in Jeonbuk Province, South Korea, which then quickly spread worldwide. In the midst of the 2020-21 H5N8 outbreak, it spread to domestic poultry and wild waterfowl shorebirds, leading to the first human infection in Astrakhan Oblast, Russia. Despite being clinically asymptomatic and without direct human-to-human transmission, the World Health Organisation stressed the need for continued risk assessment given the nature of Influenza to reassort and generate novel strains. Given its promiscuity and spread to humans, the urgency to understand the mechanisms of possible species jumping to avert disastrous pandemics is increasing. Addressing the epidemiology of H5N8 and its mechanisms of species jumping and its implications, mutational and reassortment libraries can potentially be built, allowing them to be tested on various models complemented with deep-sequencing and automation. With the knowledge on mutational patterns, cellular pathways, drug resistance mechanisms and effects of host proteins can allow better preparedness against H5N8 and other influenza A viruses.

In this study, a new type of temperature sensor device was developed. The circular electrode of the thermal sensitive sensor was modified with TMT and O₂ plasma to enhance the conductivity by forming a thin SnOxCy layer on the electrode surface. The Nano-Au particles were subjected to O₂ plasma pretreatment to form peroxide groups on the surface. The thermally sensitive sensor was made by mixing the above-treated Nano-Au particles with N-isopropylacrylamide (NIPAAm) to form solution and then UV-induced grafting polymerization of the NIPAAm-containing solution onto the electrode substrate. The composite hydrogels on the electrode introduce thermo-sensitive polymeric surface films for temperature sensing. Using ambient environment resistance test to measure the resistance, the LCST (lower critical solution temperature) of Nano-Au (MUA) mixed with NIPAAm hydrogel was found to be 32 °C. At ambient temperatures higher than LCST, the electrode resistance decreases linearly.

The International Maritime Organization (IMO) has recently revised its strategy for shipping de-carbonization, deepening the ambition to reduce annual greenhouse gas emissions until 2050. The accomplishment of this strategy requires the large-scale deployment of alternative maritime fuels, whose diversity and technical characteristics impose transition challenges. While several studies address the production of these fuels, a notable gap lies in the analysis of the required adaptations in vessels and ports for their usage. This study aims to fill this gap through a comprehensive re-view of material compatibility, storage in ports/vessels, and bunkering technology. Firstly, we an-alyze key aspects of port/vessel adaptation: physical and chemical properties; energy conversion for propulsion; fuel feeding and storage; bunkering procedures. Then, we perform a maturity as-sessment, placing each studied fuel on the technological readiness scale, revealing the most prom-ising options regarding infrastructure adaptability. Finally, we develop a case study for Brazil, whose economy is grounded on maritime exports. Findings indicate that multi-product ports may have potential to serve as multi-fuel hubs, while the remaining ports are inclined to specific fuels. In terms of vessel categories, we find that oil tankers, chemical ships and gas carriers are the most ready for conversion in the short-term

Currently, drug repurposing is an alternative to novel drug development for the treatment of COVID-19 patients. The antimalarial drug chloroquine (CQ) and its metabolite hydroxychloroquine (HCQ) are currently being tested in several clinical studies as potential candidates to limit SARS-CoV-2-mediated morbidity and mortality. CQ and HCQ (CQ/HCQ) inhibit pH-dependent steps of SARS-CoV-2 replication by increasing pH in intracellular vesicles and interfere with virus particle delivery into host cells. Besides direct antiviral effects, CQ/HCQ specifically target extracellular zinc to intracellular lysosomes where it interferes with RNA-dependent RNA polymerase activity and coronavirus replication. As zinc deficiency frequently occurs in elderly patients and in those with cardiovascular disease, chronic pulmonary disease, or diabetes, we hypothesize that CQ/HCQ plus zinc supplementation may be more effective in reducing COVID-19 morbidity and mortality than CQ or HCQ in monotherapy. Therefore, CQ/HCQ in combination with zinc should be considered as additional study arm for COVID-19 clinical trials.

This study utilizes repeated geoacoustic mapping to quantify the morphodynamic response of the nearshore to storm-induced changes. The aim of this study was to quantitatively map the nearshore zone of Assateague Island National Seashore (ASIS) to determine what changes in bottom sediments, benthic fauna and fish habitat are attributable to storm events including hurricane Sandy and the passage of hurricane Joaquin. Specifically, (1) the entire domain of the National Parks Service offshore area was mapped with side-scan sonar and multibeam bathymetry at a resolution comparable to that of the existing pre-storm survey, (2) a subset of the benthic stations were resampled that represented all sediment strata previously identified, and (3) newly obtained data were compared to that from the pre-storm survey to determined changes that could be attributed to specific storms such as Sandy and Joaquin. Capturing event specific dynamics requires rapid response surveys in close temporal association of the before and after period. The time-lapse between the pre-storm surveys for Sandy and our study meant that only a time and storm integrated signature for that storm could be obtained whereas with hurricane Joaquin we could identify impacts to the habitat type and geomorphology more directly related to that particular storm. This storm impacts study provides for the National Park Service direct documentation of storm-related changes in sediments and marine habitats on multiple scales: from large scale, side-scan sonar maps and interpretation of acoustic bottom types, to characterize as fully as possible habitats from 1 to 10 m up to many kilometer scales, as well as from point benthic samples within each sediment stratum and these results can help guide management of the island resources.

: Low-temperature growth of diamond films by chemical vapor deposition (CVD) method is not so widely reported and especially its initial periods of nucleation and growth phenomenon are of particular interest to the researchers. Four sets of substrates were selected for growing diamond films by linear antenna microwave plasma enhanced CVD (LA-MPCVD). Among them, silicon and sapphire substrates were pre-treated with detonation nanodiamond (DND) seeds before diamond growth for enhancement of its nucleation. On the other hand, carbon nanotube (CNT) films on Si substrates were also used as another template for LA-MPCVD diamond growth. In order to enhance the diamond nucleation during CVD growth, some of the CNT films were again pre-treated by electrophoretic deposition (EPD) of diamond nanoparticles. All these substrates were then put inside the LA-MPCVD chamber for growing diamond films under variable processing conditions. Microwave input powers (1100 – 2800 W), input power modes (pulse or continuous), antenna to stage distances (5 - 6.5 cm), process gas recipes (with or without CO2), methane gas percentages (3 - 5%), deposition times (11 – 120 minutes) were altered to investigate their effect on the growth of diamond film on the pre-treated substrates. The substrate temperatures were found to vary from as low as 170oC to a maximum of 307oC during the alteration of the different processing parameters. Contrary to the conventional MPCVD, it was observed that during the first hour of LA-MPCVD diamond growth, DND seeds or the nucleating structures, do not coalesce together to make a continuous film. Deposition time was the most critical factor in fully covering the substrate surfaces with diamond film, since the substrate temperature could not become stable during the first hour of LA-MPCVD. CNT was found to be oxidised rapidly under LA-MPCVD plasma conditions; therefore, a CO2-free process gas recipe was used to reduce CNT burning. Moreover, EPD-coated CNT was found to be less oxidised by the LACVD plasma during diamond growth.

This study is part of a project designed to simulate the long-term landform equilibrium of a rehabilitated mine site. The project utilizes event fine suspended sediment (FSS) fluxes in a receiving stream following a rainfall event as an indicator of landform stability. The aim of this study was to use HEC-HMS to determine sediment and discharge quantity upstream to determine how it affects the downstream development of the catchment landform, in terms of sediment changes and geomorphology. Thus, the study focused on hydrology and sediment modelling of the upper catchment with HEC-HMS (Hydrologic Engineering Center-Hydrologic Modeling System) to determine daily discharge and sediment output at the catchment outlet. HEC-HMS was used to calibrate the stream discharge and FSS quantities at the catchment outlet to observed continuous discharge and FSS values. Calibration of the HEC-HMS model was done for two water years and then the same model parameters were used to validate the model for a third water year. Catchment discharge and FSS were calibrated and validated for continuous rainfall events against observed discharge and FSS data at the catchment outlet. The model was then run for a projected rainfall of 50 years. The denudation rate predicted by the model falls in the range previously determined for the region. The simulated sediment output was compared to the rainfall trends over the years. As a result, the sediment spikes following a rainfall-runoff event gradually decreased over time. Reducing FSS spikes indicate that the landform gradually attains stability. This modeling study can be used for long-term simulations to determine erosion equilibrium over the years and to quantify sediment yield in catchments for projected wet and dry rainfall scenarios.

3D city models are being extensively used in applications such as evacuation scenarios and energy consumption estimation. The main standard for 3D city models is the CityGML data model which can be encoded through the CityJSON data format. CityGML and CityJSON use polygonal modelling in order to represent geometries. True topological data structures have proven to be more computationally efficient for geometric analysis compared to polygonal modelling. In a previous study, we have introduced a method to topologically reconstruct CityGML models while maintaining the semantic information of the dataset, based solely on the combinatorial map (C-Map) data structure. As a result of the limitations of C-Map's semantic representation mechanism, the resulting datasets could suffer either from semantic information loss or the redundant repetition of them. In this article, we propose a solution for a more efficient representation of both geometry, topology and semantics by incorporating the C-Map data structure in the CityGML data model and implementing a CityJSON extension to encode the C-Map data. In addition, we provide an algorithm for the topological reconstruction of CityJSON datasets to append them according to this extension. Finally, we apply our methodology to three open datasets in order to validate our approach when applied to real-world data. Our results show that the proposed CityJSON extension can represent all geometric information of a city model in a lossless way, providing additional topological information for the objects of the model.

It is widely acknowledged that the integration of BIM and GIS data is a crucial step forward for future 3D city modelling, but most of the research conducted so far has covered only the semantic aspects of GIS-BIM integration. We present here the results of the GeoBIM project, in which we tackled three integration problems focussing instead on aspects involving geometry processing: (i) the automated processing of complex architectural IFC models, (ii) the integration of existing GIS subsoil data in BIM, and (iii) the georeferencing of BIM models for their use in GIS software. All the problems have been studied using real world models and existing datasets made and used by practitioners in the Netherlands. For each problem, we expose in detail the issues we faced, our proposed solutions, and our recommendations for a more successful integration.

Atopic dermatitis (AD) is a chronic inflammatory skin disease, which can cause skin barrier function damaged. Although co-incubation with docosahexaenoic acid (DHA) exerts a positive effect in deficient skin model, there is no study to investigate the effects of topical treatment with DHA in inflammatory reconstructed human epidermis (RHE) model. The effects of DHA on monolayer normal human epidermal keratinocyte (NHEK) cells were evaluated via CCK-8, qPCR and ELISA. The skin related barrier function was assessed by hematoxylin-eosin (HE) staining, western blot (WB), Immunohistofluorescence (IF) and ELISA in normal and inflammatory RHE models. DHA upregulated filaggrin and loricrin expression at mRNA levels in addition to suppress overexpression of TNF-α，IL-1α and IL-6 stimulated by poly I:C plus LPS (stimulation cocktail) in cultured NHEK cells. After topical treatment with DHA, cocktail induced inflammatory characteristics of skin diseases including barrier morphological, differentiation proteins and TSLP secretion, which were alleviated in RHE models. Supplementation with DHA can improved related barrier function and have anti-inflammation effects in monolayer keratinocytes and RHE models, which indicated that DHA may have a potential value for the treatment of inflammation-associate skin diseases.

Due to the fact that abrasive media can deform flexibly in abrasive flow machining (AFM) making this method easily to polish the complex holes and the curved surface of the hard machining shapes. Although abrasive media dominate the polishing behavior in AFM process, the mechanism of the abrasive media are not easy to understand because of the high viscous gels, therefore, many finishing works need lots of time to design AFM process. Power laws of the abrasive gels is studied here to evaluate the non-Newtonian flow of abrasive gels in complex holes polishing firstly, at the mean time different abrasive gels are utilized to finish the complex holes to follow the results by non-Newtonian flow calculation. Moreover, traditional AFM has difficulty to achieve a uniform roughness of radial distribution in the complex holes polishing because of the non-uniform abrasive forces. So a helical passageway is proposed to create a multiple motion of abrasive medium and to obtain the even surface of the complex holes in AFM process.

The International Health Regulations (2005) promote national capacity in core institutions so countries can better detect, respond to and recover from public health emergencies. In accordance with the ‘all hazards’ approach to public health risk, this systematic review examines poisoning and toxic exposures in Myanmar. A systematic literature search was undertaken to find articles pertaining to poisoning in Myanmar published between 1998 and 2020. A number of poisoning risks are identified in this review including snakebites, heavy metals, drugs of abuse, agro-chemicals and traditional medicine. Patterns of poisoning presented in the literature diverge from poisoning priorities reported in other lower-middle income countries in the region. The expe-rience of professionals working in a Yangon-based poison treatment unit indicates that frequently observed poisoning as a result of substances including pharmaceuticals, methanol, and petroleum products were absent from the literature. Other notable gaps in the available research include assessments of the public health burden of poisoning through self-harm, household exposures to chemicals, paediatric risk and women’s occupational risk of poisoning. There is a limited amount of research available on poisoning outcomes and routes of exposure in Myanmar. Further inves-tigation and research is warranted to provide a more complete assessment of poisoning risk and incidence.

Excessive activation of frog eggs, so called overactivation, can be initiated by strong oxidative stress, leading to expedited calcium-dependent non-apoptotic cell death. Overactivation also occurs spontaneously, albeit with a low frequency, in natural populations of spawned frog eggs. Currently, cytological and biochemical events of the spontaneous process are not characterized. In the present study, we demonstrate that spontaneous overactivation of Xenopus frog eggs, similarly to oxidative stress- and mechanical stress-induced overactivation, is characterized by the fast and irreversible contraction of the egg’s cortical layer, increase in the egg size, depletion of intracellular ATP, drastic increase in the intracellular ADP/ATP ratio, and degradation of M phase-specific cyclin B2. These events manifest in eggs in the absence of caspase activation within just one hour of triggering overactivation. Importantly, large amounts of ATP and ADP leak from the overactivated eggs, indicating that plasma membrane integrity is compromised in these cells. The rapture of the plasma membrane and acute depletion of intracellular ATP define explicitly necrotic cell death. Finally, we report that egg overactivation can occur in the frog’s genital tract. Our data argue that mechanical stress may be a key factor promoting egg overactivation during natural spawning in frogs.

Neuropsychiatric manifestations of COVID-19 include delirium, general malaise, headache, and psychiatric symptoms. These manifestations are related to the neuroinflammatory response to viral antigens and proinflammatory mediators/immune cells. Tetracyclines, such as minocycline, have antibacterial and anti-inflammatory properties. Saiko-keishi-to, a traditional Japanese Kampo medicine, also has anti-inflammatory properties. Given the anti-inflammatory properties of minocycline and Saiko-keishi-to, we describe two cases of COVID-19 with prolonged headaches and general malaise successfully treated with these medications.

Purpose: The accuracy of conventional visual function tests, which emit visible light, decreases in patients with corneal scars, cataracts, and vitreous hemorrhages. In contrast, infrared (IR) light exhibits greater tissue penetrance than visible light and is less susceptible to optical opacities. We therefore compared visual function results obtained using conventional visual function tests and infrared 2-photon microperimetry (2PM-IR) in a subject with a brunescent nuclear sclerotic and posterior subcapsular cataract before and after cataract surgery. Methods: Visual function testing using the cone contrast threshold (CCT) test, conventional microperimetry (cMP), visible light microperimetry from a novel device (2PM-Vis), and 2PM-IR were performed before and after cataract surgery. Results: Cone contrast threshold testing improved for the S-cone, M-cone, and L-cone by 111, 14, and 30. Retinal sensitivity assessed using cMP, 2PM-Vis, and 2PM-IR improved by 18 dB, 17.4 dB, and 3.4 dB, respectively. Conclusions and Importance: 2PM-IR, unlike conventional visual function tests, showed minimal variability in retinal sensitivity before and after surgery. Thus, IR visual stimulation introduces a paradigm shift for measuring visual function in the retina and posterior visual pathways by circumventing optical media opacities.

Indium-catalyzed reaction of lactones and a disilathiane leading to thiolactones is described. The direct synthesis of thiolactones from lactones with an appropriate sulfur source is one of the most attractive approaches in organic and pharmaceutical chemistry. In this context, we found an indium-catalyzed direct conversion of lactones into thiolactones in the presence of elemental sulfur and a hydrosilane via formation of the disilathiane in-situ. On the basis of the previous reaction, the application utilizing the disilathiane as a sulfur source was performed herein for the efficient synthesis of a variety of thiolactone derivatives from lactones by an indium-catalyst.

Asians are known to more likely than Westerners develop fatty liver and lifestyle-related diseases despite their weight. However, the relationship between fat accumulation and lifestyle-related diseases in non-obese Asians is unknown. Therefore, this study aimed to analyze visceral fat and hepatic fat in participants with a normal body mass index (BMI) and examine their characteristics during a medical checkup. This cross-sectional study was conducted on 663 of 1,142 patients who underwent abdominal ultrasonography and who had an alcohol intake (converted to ethanol) of <30 g/day for males and <20 g/day for females and a BMI of <25 kg/m2 during a health checkup. Participants were classified into four groups: group A, visceral fat accumulation (VFA) (−) and fatty liver (FL) (−) (n = 549); group B, VFA (+) and FL(−) (n = 32); group C, VFA (−) and FL (+) (n = 58); and group D, VFA (+) and FL (+) (n = 24). The frequencies of lifestyle-related disease complications, liver function tests, and liver fibrosis were evaluated among the four groups. Compared with group A (control), groups B, C, and D had higher number of males; BMI; abdominal circumference, ALT, AST, γ-GTP, triglyceride, uric acid, fasting blood sugar levels; and incidence of hyperlipidemia. Groups C and D had higher ALT, HbA1c, cholinesterase, and triglyceride levels; FIB4 index; and number of patients with diabetes mellitus (DM) than groups A and B; however, there was no difference between groups A and B. FL is a risk factor of DM and liver fibrosis in non-obese Japanese individuals; however, VFA only is not a risk factor of DM and liver fibrosis.

A compositional data vector is a special type of multivariate observation in which the elements of the vector are non-negative and sum to a constant, usually taken to be unity. A compositional data does not have zero and only retains relative information. Furthermore, comparisons can only be made between compositional data of the same component. The relevant sample space is the standard simplex. A simplex space is a space that is a generalized form of a triangle. For compositional data, many of the operations defined in Euclidean space are meaningless. Microbiome analyzes have become popular in recent years. Operational Taxonomic Units (OTU) and Amplicon Sequence Variants (ASVs) used in microbiome analysis are one type of compositional data. The microbiome data are counts of different species within a sample and it is compositional. Although there is an order of bacterial abundance within a sample, there is no order of bacterial abundance between samples. Firmicutes and Bacteroidetes, the major phyla in the colon, have been observed in humans worldwide. Gut microbiome analyses often use the Firmicutes/Bacteroidetes ratio and principal coordinates analysis (PCoA). Alpha and beta diversities are used as indicators of bacterial flora diversity. However, misinformation is pervasive in the human microbiome literature and analysis. There is a lot of misunderstanding regarding compositional data and its analysis. An attempt was made to demonstrate how to analyze using the “National Institutes of Biomedical Innovation, Health and Nutrition (NIBIOHN JMD) (Public Data).” The results showed that PCoA did not work, and principal component analysis (PCA) was useful for analyzing the gut microbiome relative diversity.

This article presents a new design of supporting tethers through the concept of force distribution. The transmitted force applied on tethers will be distributed on the new tether design area resulting in low acoustic energy transferred to anchor boundaries and stored energy enhancement. This technique achieves an anchor quality factor of 175,000 compared to 58,000 obtained from con-ventional tether design representing 3-fold enhancement. Also, the unloaded quality factor of the proposed design improved from 23,750 to 27,442 representing 1.2-fold improvements.

With a reduction in the mortality rate of burn patients, patient length of stay (LOS) is increasingly adopted as an outcome measure. Some studies have attempted to identify factors that explain a burn patient's expected LOS. However, few have investigated the association between LOS and a patient's mental and socioeconomic status. There is anecdotal evidence for links between these factors and uncovering these will aid in better addressing the specific physical and emotional needs of burn patients, and facilitate the planning of scarce hospital resources. Here, we employ machine learning (clustering) and statistical models (regression) to investigate whether a segmentation by socioeconomic/mental status can improve the performance and interpretability of an upstream predictive model, relative to a unitary model derived for the full adult population of patients. Although we found no significant difference in the performance of the unitary model and segment-specific models, the interpretation of the segment-specific models reveals a reduced impact of burn severity in LOS prediction with increasing adverse socioeconomic and mental status. Furthermore, the models for the socioeconomic segments highlight an increased influence of living circumstances and source of injury on LOS. These findings suggest that, in addition to ensuring that the physical needs of patients are met, management of their mental status is crucial for delivering an effective care plan.

The high mutation rate of human immunodeficiency virus type 1 (HIV-1) plays a major role in treatment resistance from the development of vaccines to long-lasting drugs. In addressing the crux of the issue, various attempts to estimate the mutation rate of HIV-1 resulted in a large range of 10-5 - 10-3 errors/bp/cycle due to the use of different types of investigation methods. In this review, we discuss the different assay methods, their findings on the mutation rates of HIV-1 and how the location of these mutations can be further analyzed for their potential allosteric effects to reveal potentially new inhibitors with different pharmacodynamics that can be used to circumvent fast occurring HIV drug resistance. Given that HIV is one of the fastest mutating viruses, it is a good model for comprehensive study of its mutations that can give rise to much horizontal understanding towards overall viral drug resistance as well as emerging viral diseases.

Therapeutics antibodies have increasingly shifted the paradigm of disease treatments, from small molecules to biologics, especially in cancer therapy. Despite the increasing number of antibody candidates, much remains unknown about the antibody and how its various regions interact. In fact, the constant region can govern effects that might be useful in reducing the unwanted consequences resulted from systemic circulation. For this reason, apart from the commonly used IgG isotypes, IgA antibodies are promising therapeutics drugs, given its localized mucosal effects. While the antibody Fc effector cell activity has been well explored, recent research has shown evidences that the constant region of the antibody can also influence antigen binding, challenging the conventional idea of region-specific antibody functions. To further investigate this, we analyzed the IgA antibody constant and its allosteric effects onto the antigen binding regions, using recombinant Pertuzumab IgA1 and IgA2 variants. We found mutations in the C-region to reduce Her2 binding, and our computational structural analysis showed that such allosteric communications were highly dependent on the antibody hinge, providing the evidence to consider antibodies as a whole protein rather than a sum of functional regions.

Depending on human body conditions and environmental conditions, it is sometimes difficult to conduct subject experiments. In such cases, it is effective to use a thermal manikin. There are few studies that investigate the effect of the non-uniform and asymmetric outdoor thermal environment on the mean skin temperature. The purpose of this study is to clarify the influence of the non-uniform and asymmetric thermal radiation of short-wavelength solar radiation in an outdoor environment on the calculation of the mean skin temperature. The skin temperature of the front of the coronal surface, which was facing the sun and where the body received direct short-wavelength solar radiation, and the skin temperature of the rear of the coronal surface, which was in the shadow and did not receive direct short-wavelength solar radiation were respectively measured. The feet, upper arm, forearm, hand and lower leg, which are susceptible to short-wavelength solar radiation in a standing posture, had a noticeable difference in skin temperature between sites in the sun and in shade. The mean skin temperature of sites facing the sun was significantly higher than the mean skin temperature of those in the shade.

Patients with neurodegenerative diseases (NDDs) are rapidly increasing all over the world. Alzheimer’s disease (AD), Parkinson’s disease, Huntington’s disease (HD), frontotemporal lobar degeneration (FTLD) and many other diseases are classified as NDDs, however, no therapeutic drugs have been developed against NDDs yet. As common phenomenon, protein oligomers and aggregates (inclusion bodies) are formed in neurons, and they trigger neuronal cell death and/or axonal degeneration. We have investigated the mechanisms of NDDs, and discovered several chemicals and peptides have potential to cure NDDs. Here, we show phorbol 12-myristate 13-acetate (PMA) significantly inhibits aggregate formation and promotes neurite regeneration in human neuronal cell culture model of NDDs, FTLD and AD. We expressed R406W mutant tau protein found in FTLD patients in human neuroblastoma SH-SY5Y cells as FTLD cell culture model. These FTLD neuronal cells showed intracellular aggregate formation and impaired neurite growth. Addition of PMA to culture medium 60% suppressed aggregate formation. PMA also enhanced neurite growth to the normal level at nanomolar concentration. We cultured SH-SY5Y cells in the medium containing -amyloid (1-42) as AD cell culture model. In these cells, neurite growth was limited to less than 50% of controls by the treatment of -amyloid (1-42). Surprisingly, addition of PMA increased the number of cells with >10-fold neurite extension to seven times even in -amyloid (1-42) contained medium. Also, PMA increased the expression of several genes and proteins important for cell survival in both cell culture models. These results suggest PMA has unexpected potential for the drug development against NDDs.

: This paper proposes a reem-shape phononic crystal for the performance enhancement of TPoS resonators. The proposed phononic crystal offers an ultra-wide acoustic band gap that prevents energy leakage through the supporting substrate on its placement at the anchoring boundary, resulting in significant improvements in the resonator quality factor. Simulated results show reem-shape Phononic crystals generate a band gap up to 175MHz with BG of 90% and enhance the anchor quality factor from 180,000 to 6,000,000 and unloaded quality factor from 133,000 to 160,000 representing 33.3-fold and 1.2-fold improvements respectively.

HIV treatment strategies against viral enzymes are continuously hampered by viral drug resistance. Recent findings show that viral substrate Gag contributes to HIV-1 Protease Inhibitor (PI) resistance, leading to demands for new strategies in HIV treatment where Gag is recognized as a drug target. To successfully target Gag, there is a need of in-depth understanding of the Gag polyprotein and the effects of Gag mutations. Here, we propose new strategies in designing novel Gag inhibitors against existing and novel emerging Gag mutations via a structural understanding of the Gag-Protease relationship in PI resistance. In this review, we discuss the role of both novel and previously reported mutations, revealing insights to how they aid in PI resistance, and how new Gag inhibitors can be designed.

This research investigates the effect of pre-soaking treatment on plant-based aggregate using a wet grout binder to formulate a high-strength lightweight concrete (HSLWC). The surface modification utilising a novel grout soaking technique with various water-to-cement (w/c) ratios indicated a new method of approach for the recent development of lightweight plant-based aggregate (LWPA). In this experiment, the fresh and hardened properties of modified LWPA lightweight concrete were assessed by verifying their workability, densities, compressive and split tensile strengths towards the modulus of elasticity. The results showed that pre-soaking plant-based lightweight aggregate (w/c: 0.6, 0.8, 1.0, and 1.2) slightly increased the density of the samples compared to untreated LWPA. The oven-dry density of treated and untreated LWPA is controlled in the range of HSLWC. The outcomes indicated that the workability of the surface- modified LWPA has significant improvement up to 40% in 6 min for (TDS)/0.6 sample compared to the original LWPA. The mechanical properties of the LWPA concrete with surface modification method exhibit substantial increment of compressive strength, split tensile strength, and modulus of elasticity were recorded at 22%, 26%, and 34%, respectively. Significantly, the findings from this scientific method revealed that the pre-soaking treatment method on LWPA has shown to be a highly recommended technique in improving interfacial bonding while performing as one of the most promising solutions to improve the properties of lightweight concrete.

Excessive activation of frog eggs (overactivation) is a pathological process that renders eggs unfertilizable. Its physiological inducers are unknown. Previously, oxidative stress was shown to cause time- and dose-dependent overactivation of Xenopus laevis frog eggs [1]. Here, we demonstrate that the oxidative stress-induced egg overactivation is a calcium-dependent phe-nomenon which can be attenuated in the presence of the selective calcium chelator BAPTA. Degradation of cyclin B2, which is known to be initiated by calcium transient in fertilized or parthenogenetically activated eggs, can also be observed in the overactivated eggs. Decline in mitochondrial membrane potential, ATP depletion and termination of protein synthesis manifest in the eggs within one hour of triggering overactivation. These intracellular events occur in the absence of caspase activation. Furthermore, plasma membrane integrity is compromised in the overactivated eggs, as evidenced by ATP leakage and egg swelling. In sum, our data demonstrate that oxidative stress-induced overactivation of frog eggs causes fast and dramatic disruption of cellular homeostasis, resulting in robust and expedited cell death by a calcium-dependent non-apoptotic mechanism.

We have previously reported that 60% sucrose diet-fed ChREBP knockout mice (KO) showed body weight loss resulting in lethality. We aimed to elucidate whether sucrose and fructose metabolism are impaired in KO. Wild type mice (WT) and KO were fed a diet containing 30% sucrose with/without 0.08% miglitol, an α-glucosidase inhibitor, and these effects on phenotypes were tested. Furthermore, we compared metabolic changes of oral and peritoneal fructose injection. Thirty percent sucrose diet feeding did not affect phenotypes in KO. However, miglitol induced lethality in 30% sucrose-fed KO. Thirty percent sucrose plus miglitol diet-fed KO showed increased cecal contents, increased fecal lactate contents, increased growth of lactobacillales and Bifidobacterium and decreased growth of clostridium cluster XIVa. ChREBP gene deletion suppressed the mRNA levels of sucrose and fructose related genes. Next, oral fructose injection did not affect plasma glucose levels and liver fructose contents; however, intestinal sucrose and fructose related mRNA levels were increased only in WT. In contrast, peritoneal fructose injection increased plasma glucose levels in both mice; however, the hepatic fructose content in KO was much higher owing to decreased hepatic Khk mRNA expression. Taken together, KO showed sucrose intolerance and fructose malabsorption owing to decreased gene expression.

Tumor growth, progression, and therapy resistance are crucial factors in the prognosis of cancer. Properties of three-dimensional tumor-like organoids (tumoroids) more closely resemble in vivo tumors compared to two-dimensionally cultured cells and are therefore effectively used for assays and drug screening. We here established a repurposed drug for novel anticancer research and therapeutics using a tumoroid-based screening system. We screened 6 pharmacologically active compounds by using an original tumoroid-based multiplex phenotypic screening system with matrix metalloproteinase 9 (MMP9) promoter-driven fluorescence reporter for the evaluation of both tumoroid formation and progression. The effects of one of the hit compounds were examined on tumor formation and progression in vitro and in vivo. Antiparkinson drug benztropine was the most effective compound uncovered by the screen. Benztropine significantly inhibited in vitro tumoroid formation, cancer cell survival, and MMP9 promoter activity. Benztropine also reduced the activity of oncogenic signaling transducers and trans-activators for MMP9, including STAT3, NF-κB, and β-catenin, and properties of cancer stem cells / cancer-initiating cells. Benztropine and GBR-12935 directly targeted the dopamine transporter DAT/SLC6A3, whose genetic alterations such as amplification were correlated with poor prognosis for cancer patients. Benztropine also inhibited tumor growth, circulating tumor cell (CTC) number, and rate of metastasis in a tumor allograft model in mice. In conclusion, we propose the repurposing of benztropine for anticancer research and therapeutics that can suppress tumor progression, CTC, and metastasis of aggressive cancers by reducing key pro-tumorigenic factors.

GCN1 is recognized as a factor that is essential for the activation of GCN2, which is a sensor of amino acid starvation. This function is evolutionarily conserved from yeast to higher eukaryotes. However, recent studies have revealed non-canonical functions of GCN1 that are independent of GCN2, such as its participation in cell proliferation, apoptosis, and the immune response, beyond the borders of species. Although it is known that GCN1 and GCN2 interact with ribosomes to accomplish amino acid starvation sensing, recent studies have reported that GCN1 binds to disomes (i.e. ribosomes that collide each other), thereby regulating both the co-translational quality control and stress response. We propose that GCN1 regulates ribosome-mediated signaling by dynamically changing its partners among RWD domain-possessing proteins via unknown mechanisms. We recently demonstrated that GCN1 is essential for cell proliferation and whole-body energy regulation in mice. However, the manner in which ribosome-initiated signaling via GCN1 is related to various physiological functions warrants clarification. GCN1-mediated mechanisms and its interaction with other quality control and stress response signals should be important for proteostasis during aging and neurodegenerative diseases, and may be targeted for drug development.

Although the relations between sleep and academic performance have been extensively examined, how sleep predicts future academic performance (e.g., 2 -3 years) remains to be further investigated. Using wearable smartwatches and a self-report questionnaire, we tracked sleep activities of 45 college students over a period of approximate half a month to see whether their sleep activities predicted their academic performance, which was estimated by grade point average (GPA). Results showed that both nighttime sleep awakening frequency and its consistency in the tracking period were not significantly correlated with the GPA for the courses taken in the semester during sleep tracking (current GPA). However, both nighttime sleep awakening frequency and its consistency inversely predicted the GPA for the rest of the courses taken after that semester (future GPA). Moreover, students with more difficulty staying awake throughout the day obtained lower current and future GPAs, and students with lower inconsistency of sleep quality obtained lower future GPA. Together, these findings highlight the importance of nighttime sleep awakening frequency and consistency in predicting future academic performance and emphasize the necessity of assessing the consistency of sleep measures in future studies.

During planetary exploration mission operations, one of the key responsibilities of the instrument teams to determine data viability for subsequent analysis. During the 2019 CanMoon Lunar Sample Return Analogue Mission, the Lead Raman Specialist manually examined each spectra to provide quality assurance/validation. This non-trivial process requires years of experience to complete accurately. With the proven efficacy of Convolutional Neural Networks (CNNs) in classification tasks, and the increased use of automation and control loops on planetary space platforms for navigation and science targeting, an opportunity presents itself to approach this validation problem utilising CNNs. We present the Generalised Raman Validation Network (GRaVN), an neural network focused specifically on extracting the generalised structure of Raman spectra for quality assurance/validation. This work demonstrates the viability of utilising a CNN network in validation activities for Raman spectroscopy. Utilising only two hidden layers, a configuration was developed that provided good levels of accuracy on a manually curated dataset. This indicates that such a system could be useful as part of an autonomous control loop during planetary exploration activities.

Background and objectives: The initiation of apoptotic death in cancer cells is the aim of many chemotherapeutic strategies. As many anticancer agents have been discovered in natural plant sources, the search for novel phytochemicals displaying anticancer activities continues at a tremendous rate. This study was conducted to evaluate the effect of extractable polyphenols (EPP); non-extractable polyphenols (NEPP); nobiletin (NOB); tectorigenin (TEC) and persicogenin (PERS) from Barhi date palm kernels (BDPK) extracts on the induction of apoptosis in human lung cancer A549 and colon cancer HT29 cell lines. Materials and Methods: The anticancer activities were determined using MTT and trypan blue exclusion assays. Flow cytometry analysis was performed to study the cell viability, cell cycle arrest and apoptosis. The underlying mechanism of apoptosis induced by crude extracts and the purified compounds was investigated using caspase-3, -8 and -9 assays and the mitochondrial membrane potential assay. Results: The findings indicate that both BDPK extracts and the purified compounds do exert induced cell death on A549 and HT29 cells. The results observed from MTT- assay and trypan blue exclusion indicate that the cytotoxic effects of both plant extracts and the three isolated flavonoids are dose-dependent with higher cell death after 72 hours treatment. Treatment of human lung and colon cancer cells with EPP, NEPP, NOB, TEC and PERSI induced late stages of apoptosis as there was evidence of the DNA degradation and high percentage of the cells population was situated at sub-G1 phase, indicating a high population of apoptotic cells. Conclusions: Study of the apoptotic mechanism demonstrated that EPP and NEPP exhibited dependent mitochondrial signalling pathway as seen with caspase-9 and induced receptor-mediated (extrinsic) apoptotic pathway as seen with caspase-8. Therefore, our results suggest that BDPK extracts and the three isolated flavonoids could be a good candidate for developing anticancer agents.

Background. Asbestos has been used for thousands of years but in a large industrial scale for about 100–150 years. The first identified disease was asbestosis, a type of incurable pneumoconiosis caused by asbestos dust and fibres. The latest estimate of global number of asbestosis deaths from the Global Burden of Disease estimate 2016 is 3495. Asbestos caused cancer was identified in the late 1930’s but despite of today’s overwhelming evidence of the strong carcinogenicity of all asbestos types including chrysotile it is still widely used globally. Various estimates have been made over time including those of WHO and ILO 107,000–112,000 deaths. Present estimates are radically higher. This special edition of the Journal summarizes key aspects of the past and present of the asbestos problem globally. Methods. Documentation on milestones of asbestos related diseases, ARDs, their recognition, reporting, compensation and prevention efforts were examined, in particular from the regulatory and prevention point of view. Estimated global numbers of incidence and mortality of ARDs were looked at. Results. Asbestos causes an estimated 257,000 deaths (243,223–270,635) annually according to latest knowledge. Work-related exposures are responsible for 235,000 deaths (222,322–247,363) of those. In the European Union, USA and in other High income economies (WHO regional classification) the direct costs for sickness, early retirement and death, including production losses, have been estimated to be very high, in the Western European countries and EU equivalent of 0.70% of the GDP or 114.9*109 USD. Intangible costs could be much higher. When applying the Value of Statistical Life (VSL) of 4 million EUR per cancer death used by the European Commission we arrived 5at 410*109 USD while the human suffering and loss of life is impossible to quantify. The numbers and costs are increasing practically in every country and region in the world. Asbestos has been banned in 55 countries but used widely today, some 2,030,000 tons consumed annually according to latest available consumption data. Every 20 tons of asbestos produced and consumed kills a person somewhere in the world. Buying 1 kg asbestos powder format e.g. in Asia costs some 0.38 USD and 20 tons would cost in such retail market 7600 USD. Conclusions. Present efforts to eliminate this man-made problem, in fact an epidemiological disaster, and preventing exposures leading to it are insufficient in most countries in the world. Applying programmes and policies, such as those on the elimination of all kind of asbestos use—that is banning of new asbestos use and tight control and management of existing structures containing asbestos—need revision and resources. The ILO/WHO Joint Programme for the Elimination of Asbestos-related Diseases need to be revitalized. Exposure limits do not protect properly against cancer but for asbestos removal and equivalent exposure elimination work we propose a limit value of 1000 fibres/m³.

The intensive care units in North West London are part of one of the oldest critical carenetworks in the UK, forming a mature and established strategic alliance to shareresources, experience and knowledge for the benefit of its patients. North WestLondon saw an early surge in COVID-19 admissions, which urgently threatened thecapacity of some of its intensive care units even before the UK government announcedlockdown. The pre-existing relationships and culture within the network allowed itsmembers to unite and work rapidly to develop agile and innovative solutions, protectingany individual unit from becoming overwhelmed, and ultimately protecting its patients.Within a short 50-day period 223 patients were transferred within the network todistribute pressures. This unprecedented number of critical care transfers, combinedwith the creation of extra capacity and new pathways, allowed the region to continue tooffer timely and unrationed access to critical care for all patients who would benefitfrom admission. This extraordinary response is a testament to the power and benefitsof a regionally networked approach to critical care, and the lessons learned maybenefit other healthcare providers, managers and policy makers, especially in regionscurrently facing new outbreaks of COVID-19.

Since the beginning of 2020, tetracycline (TC), such as minocycline (MINO), has been used to inhibit coronavirus disease 2019 (COVID-19). Traditional Japanese Kampo medicine, such as Saiko-keishi-to (SKT), has recently received a lot of attention for its anti-severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) effects. We describe a COVID-19 patient treated with MINO and SKT in anticipation of their anti-SARS-CoV-2 properties. A 90-year-old male patient with Alzheimer’s disease was referred to a medical clinic due to fever, appetite loss, and general malaise. Based on positive SARS-CoV-2 rapid antigen tests, he was diagnosed with COVID-19. He did not have COVID-19 pneumonia, but he had difficulty in eating on his own. As a result, he was referred to a hospital for admission. After admission, he was treated with molnupiravir to avoid aggravation. Seven days after his admission, he was discharged. After his discharge, he was referred to our hospital as an outpatient due to a prolonged mild fever and general malaise. As a precaution, a real-time reverse transcription-polymerase chain reaction (RT-PCR) test was performed, which yielded a positive result. Therefore, the aforementioned symptoms were thought to be caused by prolonged COVID-19. He was treated with MINO and SKT due to the anti-viral properties of these two drugs. The RT-PCR test became negative 7 days after receiving this treatment, and the fever and general malaise subsided.

Matrix metalloproteinase 3 (MMP3) plays multiple roles in pro-tumorigenic proteolysis and in intracellular transcription. These include inducing connective tissue growth factor [CTGF, also known as cellular communication network factor 2 (CCN2)] and prompting a new definition of MMP3 as a moonlighting metalloproteinase. Members of the MMP family have been found within tumor-derived extracellular vesicles (EVs) such as oncosomes or exosomes. We here investigated the roles of MMP3-rich oncosomes in tumor progression, molecular transmission, and gene regulation. MMP3 and CCN2/CTGF were significantly co-expressed in tumor samples derived from patients suffering from colorectal adenocarcinoma. We found that oncosomes derived from a rapidly metastatic colon cancer cells (LuM1) were enriched in MMP3 and a C-terminal half fragment of CCN2/CTGF. MMP3-rich oncosomes were highly transmissive into recipient cells and were pro-tumorigenic in an allograft mouse model. Oncosome-derived MMP3 was transmissive into recipient cell nuclei, trans-activated CCN2/CTGF promoter, and induced CCN2/CTGF production at 1 to 6 hours after the addition of oncosomes to culture media. In addition, CRISPR/Cas9-mediated knockout of MMP3 showed significant anti-tumor effects, including inhibition of migration and invasion of LuM1 cells in vitro, inhibition of tumor growth in vivo, and reduction of CCN2/CTGF and its promoter activity in vitro. These data newly demonstrate that the oncosome-derived moonlighting metalloproteinase promotes metastasis and is pro-tumorigenic at distant sites as well as a transmissive trans-activator for the cellular communication network gene.

Immune Checkpoint Inhibitors are monoclonal antibodies that are used to treat over one in three cancer patients. While they have changed the natural history of disease, prolonging life and preserving quality of life, they are highly active in less than 40% of patients, even in the most responsive malignancies such as melanoma, and cause significant autoimmune side effects. Licenced biomarkers include tumour Programmed Death Ligand 1 expression by immunohistochemistry, microsatellite instability, and Tumour Mutational Burden, none of which are particularly sensitive or specific. Emerging tumour and immune tissue biomarkers such as novel immunohistochemistry scores, tumour, stromal and immune cell gene expression profiling, and liquid biomarkers such as systemic inflammatory markers, kynurenine/tryptophan ratio, circulating immune cells, cytokines and DNA are discussed in this review. We also examine the influence of the faecal microbiome on treatment outcome and its use as a biomarker of response and toxicity.

The state of charge estimation is an important part of the battery management system, the estimation accuracy of which seriously affects the working performance of the lithium ion battery pack. The unscented Kalman filter algorithm has been developed and applied to the iterative calculation process. When it is used to estimate the SOC value, there is a rounding error in the numerical calculation. When the sigma point is sampled in the next round, an imaginary number appears, resulting in the estimation failure. In order to improve the estimation accuracy, an improved adaptive square root - unscented Kalman filter method is introduced which combines the QR decomposition in the calculation process. Meanwhile, an adaptive noise covariance matching method is implied. Experiments show that the proposed method can guarantee the semi-positive and numerical stability of the state covariance, and the estimation accuracy can reach the third-order precision. The error remains about 1.60% under the condition of drastic voltage and current changes. The conclusion of this experiment can provide a theoretical basis of the state of charge estimation in the battery management of the lithium ion battery pack.

Contrast-enhanced ultrasonography (CEUS) is useful for evaluation of the hemodynamics of hepatic tumors and surrounding he-patic parenchyma in real time. CEUS with intravenous contrast administration is well established for evaluation of hepatocellular carcinoma (HCC). On the other hand, intra-arterial (transcatheter) CEUS (IAUS) is an emerging technique that allows more selective evaluation of the arterial supply to the tumor. IAUS was performed by administration of Sonazoid® through the microcatheter and imaging of the area of the target lesion with a dedicated, contrast-specific technique. Sonazoid® (0.5 ml diluted with 49.5 ml of distilled water) was used as the contrast medium in IAUS. The diluted Sonazoid® was introduced into the feeding artery by in-termittent injection of 0.3-1.0 ml through a microcatheter placed in the artery and flushing with saline at the same flow rate. We report the three cases in which IAUS was useful in transarterial chemoembolization (TACE) for HCC. Two cases were performed TACE for hepatic metastasis. In any cases, plain computed tomography (CT) after TACE showed accumulation of Lipiodol® only in the metastases. One case was suspected having HCC rupture and urgent abdominal angiography was performed. IAUS was performed frequently to reduce the amount of iodinated contrast agent as much as possible because of renal failure. Concomitant use of IAUS enabled reduction of the amount of contrast agent.

Summary Genome assembly projects have grown exponentially due to breakthroughs in sequencing technologies and assembly algorithms. Evaluating the quality of genome assemblies is critical to ensure the reliability of downstream analysis and interpretation. To fulfil this task, we have developed the AssemblyQC pipeline that performs file-format validation, contaminant checking, contiguity measurement, gene- and repeat-space completeness quantification, telomere inspection, taxonomic assignment, synteny alignment, scaffold examination through Hi-C contact-map visualisation, and assessments of completeness, consensus quality and phasing through K-mer analysis. It produces a comprehensive HTML report with method descriptions, tables, and visualisations. Availability and Implementation The pipeline uses NextFlow for workflow orchestration and adheres to the best-practice established by the nf-core community. This pipeline offers a reproducible, scalable, and portable method to assess the quality of genome assemblies – the code is available online.GitHub: https://github.com/Plant-Food-Research-Open/assemblyqc Supplementary information Pipeline usage documentation, parameter descriptions and example outputs are available on GitHub: https://github.com/Plant-Food-Research-Open/assemblyqc/tree/main/docs. A preview report is also hosted online: https://plant-food-research-open.github.io/assemblyqc

Plant diseases are among the major factors affecting plant productivity. Biological control of plant diseases is preferred over chemical control as it is environment-friendly, cost-effective, and sustainable. Among many microbes capable of providing biological control of plant diseases, probiotic Bacillus species are most promising as they can survive in adverse conditions, provide plants with a wide range of benefits including protection from phytopathogens. Wheat blast caused by Magnaporthe oryzae Triticum pathotype (MoT) has emerged as a potential threat to global wheat production. Due to unreliability of fungicides and limited cultivar resistance, we aimed to screen and identify potential antagonist bacteria collected from internal tissues of rice and wheat seeds to determine their in vitro and in vivo inhibitory effects against MoT. Dual culture and seedling assays were performed to evaluate the efficacy of probiotic bacteria. Out of 170 bacterial isolates, three bacteria (BTS-3, BTS-4, and BTLK6A) were screened as potential antagonists against MoT in vitro. Artificial inoculation at the seedling stage showed that the isolates BTS-4, BTS–3, and BTLK6A reduced 89, 88, and 85% of wheat blast disease severity, respectively, compared to mock-inoculated control. The bacterial isolates were identified as Bacillus subtilis (BTS-3) and B. velezensis (BTS-4 and BTLK6A) through genome phylogeny. The whole genome sequence of these three bacterial strains decoded a number of orthologs to intrinsic genes of antimicrobial peptides, antioxidant defense enzymes, cell wall degrading enzymes, compounds involved in the induction of systemic resistance (ISR) in host plants, and volatile compounds to make them promising biologicals to control MoT in wheat. Combined data of in vitro and in vivo along with genome analysis suggest that Bacillus spp. suppress the destructive wheat blast disease likely through antibiosis and ISR in the host plants. Further field evaluation and characterization of antimicrobial compounds are needed for a better understanding of the mode of action and practical recommendation of these bacteria for wheat blast control in the farmers’ fields.

To remain competitive in the current market, an enterprise must differentiate itself based on higher value propositions. For this purpose, since improving the product or service performance can reach some limits, one potential solution is to move towards new combinations of products and services. This evolution, called servitization, leads to the generation of Product-Service Systems (PSS). Servitization requires not only a clear understanding of enterprise core business but also a clear vision on the prevailing trends and challenges of PSS development from both business and technological points of view. In addition, the evolution path should be aligned with the enterprise strategy. This paper first highlights the notion of symbiotic PSS where Product Systems and Service Systems, and their stakeholders, interoperate seamlessly based on a win-win approach. Then it proposes a PSS Conceptual Framework (PSS-CF) which can be applied in the early stages of servitization to increase the understating of PSS dimensions and to facilitate the prioritization of the servitization investments. The framework dimensions were discussed in several iterations, from both academic and industrial points of view, in the frame of a European research project. Moreover, the applicability of the framework was studied in four different industrial Use-Cases.

Monolayer graphene absorbs 2.3 percent of the incident visible light. This “small” absorption has been used to emphasize the visual transparency of graphene, but it in fact means that multilayer graphene absorbs a sizable fraction of incident light, which causes non-negligible fluorescence. In this paper, we formulate the light emission properties of multilayer graphene composed of tens to hundreds of layers using a transfer matrix method and confirm the method’s validity experimentally. We could quantitatively explain the measured contrasts of multilayer graphene on SiO2/Si substrates and found sizable corrections, which cannot be classified as incoherent light emissions, to the reflectance of visible light. The new component originates from coherent emission caused by absorption at each graphene layer. Multilayer graphene thus functions as a partial coherent light source of various wavelengths, and it may have surface-emitting laser applications.

Numerous companies frequently engage in collaborative cooperation to exchange intelligence rather than resorting to competing strategies to achieve higher levels of intelligence. \textit{Intelligence} is essential in determining \textit{collaborative intelligence} . Intelligence can be discerned by a range of behaviors and actions that go beyond the mere individual observable activity. Collaborative intelligence is often defined as the combined actions of individuals (such as humans and machines) working towards a common goal. It encompasses more than just behaviour and includes other crucial elements such as the sharing of intelligence. The ontological view concerns the system's understanding and representation of information, data, and the fundamental reality it aims to capture and manage. This paper aims to expand upon our previous research on Intelligence in decentralized environments. The methodology utilized in this paper involves employing an ontological view to derive intelligence, encompassing its various forms, such as data, information, and knowledge. The paper explores the fundamental significance of intelligence and semantic integration in supporting the collaborative intelligence framework. Semantic integration is crucial to establishing a shared understanding of individuals' data, information, and concepts. It is fundamental in facilitating effective communication, intelligence sharing, and decision-making within a collaborative environment.

Using data from the Swedish National Diabetes Register, this study examines the gender disparity among patients with type I diabetes who have experienced a specific cardiovascular complication, while exploring the association between weight variability, age group, and gender. Fourteen cardiovascular complications have been considered. This analysis is conducted by using three-way correspondence analysis (CA) which allows for the partitioning and decomposition of Pearson’s three-way chi-squared statistic. The dataset comprises of information organized in a data cube, detailing how weight variability among these patients correlates with a cardiovascular complication, age group and gender. The three-way CA method presented in this paper allows for one to assess the statistical significance of the association between these variables and to visualize this association, highlighting the gender gap among these patients. It is worth noting that the association between weight variability, age group, and gender varies among different types of cardiovascular complications.

Langya Henipavirus (LayV) is a new zoonotic Henipavirus reported in 2022. Patients infected by LayV show common cold symptoms, such as fever, fatigue, and cough. Non-fatal cases associated with this virus have been reported in Henan and Shandong provinces in China. Should human-to-human transmission occur, it has the potential to be a pandemic like SARS-CoV-2. LayV is an enveloped negative-sense RNA virus. Its polymerase (encoded by the L gene) is considered a conserved target shared within Henipavirus viruses, allowing for qPCR detection, in which primers play a pivotal role. For the development of a diagnostic kit, we designed three primer sets targeting the L gene and evaluated their detection of plasmids carrying part of the L gene. Primer sets 1 and 2 were found to be suitable for further sensitivity, specificity, and efficiency testing. Both primer sets were able to amplify PCR products in the presence of human saliva, and both the melt curve analysis and gel electrophoresis showed distinct peaks and bands, supporting the specificity of the qPCR primers. Based on standard curve analysis, both primers detected as low as approximately 1000 copies of the L gene. Given the specificity and robustness to work in the presence of saliva, the primers can be used for pandemic-preparedness in LayV detection.

Achieving the thermal conductivity required for efficient heat management in semiconductors and other devices requires the integration of thermally conductive ceramic fillers at concentrations of 60 vol% or higher. However, the increased filler content often negatively affects the mechanical properties of the composite matrix, limiting its practical applicability. To address this issue, in this paper, we present a new strategy to reduce the required ceramic filler content: the use of a thermally conductive ceramic composite filler with carbon nanotubes (CNT) grown on aluminum nitride (AlN). We have combined catalyst coating technology with vacuum filtration to ensure that the catalyst is uniformly applied to micrometer-sized AlN particles, followed by efficient and uniform synthesis of CNTs using a water-assisted process in a vertical furnace. By carefully controlling the number of vacuum filtration cycles and the growth time of the CNTs, we demonstrate precise control over the number and length of the CNT layers, thereby adjusting the properties of the composite to the intended specifications. When AlN/CNT hybrid fillers are incorporated into silicone rubber, while maintaining the mechanical properties of rubber, the thermal diffusivity achieved at reduced filler levels exceeds that of composites using AlN-only or simultaneous AlN and CNTs formulations. This demonstrates the critical role of CNTs on AlN surfaces. Our study represents a significant advancement in the design of thermally conductive materials with potential implications for a wide range of applications.

In the present work, diamond films have been grown on GaN-on-Sapphire substrates by chemical vapor deposition (CVD) with the addition of nitrogen to the standard H2/CH4 precursor recipe. Diamond on GaN materials processing is not straight-forward, as GaN is susceptible to a quasi-pure hydrogen CVD plasma etching. 1%, 3% and 5% N2 gas was gradually added to the H2 gas with fixed 6% CH4 in the recipe to promote the growth of diamond nanocrystals. Different types of microstructures were produced, with addition of nitrogen to the precursor gas recipe. Nitrogen gas changes the diamond film microstructure from faceted to spherical grains, with signs of GaN etching. The sp3 bonded diamond film produced by nitrogen addition was found to be co-deposited along with a considerable amount of other non-diamond carbon phases (D - disordered graphite, G - crystalline graphite, TPA - trans-polyacetylene) and qualitatively all the diamond films were 50% pure (Raman peak ratio Isp3 / ID). The FWHM of the sp3 carbon Raman peak was calculated to be 6.5 cm-1, when there was no nitrogen gas in the precursor recipe, which deteriorates to a large extent after successive addition of N2. Fourier transform infrared spectroscopy (FTIR) showed a strong presence of the nitrogen related defects (peak positions at 1190 and 1299 cm-1) inside the nanocrystalline diamond (NCD) films grown with N2 addition. GaN layer etching from the base substrate by the CVD plasma was clearly evidenced by energy dispersive X-ray spectra (EDS) of the deposited films. Al elemental EDS peaks from the base sapphire substrate were observed for the films grown with nitrogen addition, but no Ga EDS peaks were detected. X-ray diffraction (XRD) micrographs further supported the enhanced GaN etching phenomenon. Nitrogen addition was thus found to be detrimental for growing CVD diamond films over GaN surfaces. The electrical resistivity of the uncoated GaN was initially measured to be 22.2 Ω-cm. However, the resistivity rose to 1.59×106 Ω-cm after the nitrogen assisted film deposition; due to the GaN etching - thereby exposing the underlying insulating sapphire substrate.

Ethyl loflazepate (EL) is a benzodiazepine derivative that has been reported to activate the gustatory cortex. Our department routinely uses EL as a first-line treatment for idiopathic and psychogenic taste disorders, although little has been reported in the literature with respect to patient outcomes, so we conducted a retrospective study examining its safety and efficacy. Between 2008 and 2020, 49 patients (14 males and 35 females; mean age, 62.1 years) were diagnosed with taste disorders and received EL as their only treatment for &gt;14 days. Severity of taste disorder was evaluated using the paper disc method by Sakai et al [7], and treatment efficacy was evaluated using the Visual Analogue Scale, wherein patients gave subjective ratings for their symptoms (reductions by &gt;50% after administration of EL for 4 weeks were defined as mprovements). Results showed that the improvement rates for patients with idiopathic and psychogenic taste disorders were 55% and 70%, respectively. Additionally, the majority (78%) improved within 2 weeks, and side effects were mild (seven cases of sleepiness and one case of dizziness). We conclude that EL is an appropriate first-line medication for patients with idiopathic and psychogenic taste disorders.

The COVID-19 pandemic measures have negatively impacted education worldwide via travel restrictions, student visas, and physical attendanc,e among many other fac-tors. As one of the first places to impose strict pandemic measures and one of the last places to lift the measures, Mainland China provided a unique venue to investigate the effect of public health pandemic control policies on tertiary education. Considering the large portion of international students in medical schools and the higher susceptibility to the pandemic measures due to the natural synergy with teaching hospitals, medical schools can be an early forefront indicator of the impact of the pandemic on tertiary education. We surveyed 513 participants international medical students from Wen-zhou Medical University’s school of international studies in 2019 and 2022 about their satisfaction and demographic and cultural adaptation parameters. We found that the pandemic restrictions did not generally impact student satisfaction. Further analyzing the associated parameters, we found teaching satisfaction to be independent of age (P=.159), years in China (P=.896) and Chinese Level (P=.577) in the medical university. Teaching satisfaction is associated with the region of origin (P <0.001), acceptance of local social norms (P <0.001), satisfaction with the core values of Chinese culture (P <0.001), acclimatization to life in China (P <0.001), can easily make Chinese friends (P <0.001) among other factors. The findings of this study provide an understanding of the effects of pandemic measures on tertiary education satisfaction and other factors that can aid in international student satisfaction.

Mesenchymal stem cells (MSCs) have the tumor-homing capacity, and therefore MSCs are considered to be a promising drug delivery carrier for cancer therapy. To maintain the viability and activity of MSCs, anti-cancer drugs are preferably modified on the surface of MSCs, rather than directly introduced into MSCs. In this study, we attempted to construct surface-modified MSCs with liposomes as a drug carrier by using magnetic anionic liposome/atelocollagen complexes we previously developed. We observed that large-sized magnetic anionic liposome/atelocollagen complexes were abundantly associated with MSCs via electrostatic interactions under a magnetic field, and its cellular internalization was lower than that of the small-sized complexes. Moreover, the complexes with higher atelocollagen concentration showed lower cellular internalization than the complexes with lower atelocollagen concentration. Based on these results, we succeeded in the efficient surface modification of MSCs with liposome by using large-sized magnetic anionic liposomes complexed with high concentration of atelocollagen. The constructed liposome-modified MSCs showed comparable proliferation rate and differentiation potential to unmodified MSCs. Furthermore, liposome-modified MSCs efficiently adhered to vascular endothelial cells and migrated toward the conditioned medium from cancer cells in vitro. These findings suggest that liposome-modified MSCs could serve as an efficient cell-based drug carrier for tumor targeted delivery.

Neuroendocrine tumors develop from systemic endocrine and nerve cells, and their occurrence has increased recently. Since these tumors are heterogeneous, pathological classification has been based on the affected organ. In 2019, the World Health Organization introduced a change that is expected to influence neuroendocrine tumor research, as gastroenteropancreatic neuroendocrine tumors are now included within a unified classification. In this retrospective study, we aimed to investigate the characteristics (e.g., lymph node metastases, all other metastases) of gastroenteropancreatic neuroendocrine tumors using this new classification in 50 cases. Tumor size, depth, MIB-1 index, lymphatic invasion, venous invasion, and neuroendocrine tumor grade were significantly correlated with lymph node metastasis and all other metastases. Venous invasion was more strongly correlated with lymph node metastasis and all other types of metastasis than with lymphatic invasion. Identification rates for lymphatic invasion were considered lower because of structural problems such as lymphatic vessels being much thinner than veins. However, venous invasion was considered effective in compensating for the low rate of identification in cases of lymphatic invasion. In future research, a unified classification and standardized framework for assessment will be important when analyzing the characteristics of neuroendocrine tumors, and large-scale studies are required.

While sex ratios at birth (SRB) have been shown to vary within and across populations, after over a century of research, explanations have remained elusive. A variety of ecological, demographic, economic, and social variables have been evaluated, yet their association with SRB has been equivocal. Here, in an attempt to shed light on this unresolved topic within the literature, we approach the question of what drives variation in SRB using detailed longitudinal data spanning the frontier-era to the early 20th century in a US population. Using several measures of environmental harshness, we find that fewer boys are born during challenging times. However, these results hold only for the frontier-era and not into a period of rapid industrialization. We argue that the mixed state of the literature may result from the impact and frequency of exogenous stressors being dampened in post-industrial societies.

Background: Succinate dehydrogenase (SDH)-deficient renal cell carcinoma (RCC) is mainly associated with SDHB gene mutation and sometimes with SDHC or SDHD mutation. However, only three case of SDHA-deficient RCC have been reported, and the relation of SDHA mutation to RCC has not been clarified. Methods: We investigated SDHA/B/C/D gene mutations in 72 human RCCs by targeted next-generation sequencing, and also assessed SDHA and nuclear factor erythroid 2–related factor 2 (Nrf2) protein expression in 30 tumors. Results: NGS revealed SDHA gene mutations associated with amino acid sequence variations in 12 tumors, while no tumors had SDHB/C/D mutations. The SDHA gene mutations were identical in somatic and germline DNA of all 12 patients. Tumors with SDHA mutations showed a decrease of SDHA protein (p = 0.0177) and an increase of Nrf2 protein (p = 0.0120), with an inverse correlation between SDHA and Nrf2 protein expression (p = 0.0321). Tumor cells with SDHA mutations characteristically had eosinophilic cytoplasm and showed various patterns of proliferation. Conclusions: Our observations suggested that germline SDHA gene mutations might be linked to hereditary RCC associated with mitochondrial dysfunction.

Chloroquine was among the first of several effective drug treatments against malaria until the onset of chloroquine resistance. In light of diminished clinical efficacy of chloroquine as an antimalarial therapeutic, there is potential in efforts to adapt chloroquine for other clinical applications, such as in combination therapies and in diagnostics. In this context, we designed and synthesized a novel asymmetrical squaraine dye coupled with chloroquine (SQR1-CQ). In this study, SQR1-CQ was used to label live Plasmodium falciparum (P. falciparum) parasite cultures of varying sensitivities towards chloroquine. SQR1-CQ positively stained ring, mature trophozoite and schizont stages of both chloroquine–sensitive and chloroquine–resistant P. falciparum strains. In addition, SQR1-CQ exhibited significantly higher fluorescence, when compared to a chloroquine-BODIPY (borondipyrromethene) conjugate. We also achieved successful SQR1-CQ labelling of P. falciparum directly on thin blood smear preparations. Drug efficacy experiments measuring half-maximal inhibitory concentration (IC50) showed lower concentration of effective inhibition against resistant strain K1 by SQR1-CQ compared to conventional chloroquine. Taken together, the versatile and highly fluorescent labelling capability of SQR1-CQ and promising preliminary IC50 findings potentiates it to be further developed as a promising diagnostic bioimaging tool with drug efficacy against chloroquine-resistant P. falciparum.

A sensitive and robust liquid chromatography-tandem mass spectrometric (LC-MS/MS) method was developed and validated for the determination of nimbolide in mouse serum. Exemestane was used as the internal standard (IS). Here, we employed acetonitrile-based protein precipitation (PPT) for serum sample preparation, and performed chromatographic separation using an ODS Hypersil C18 column (100×2.1 mm, 5µm) with gradient elution (0.1% formic acid in water vs 100% acetonitrile). The run time was 6 min. Instrumental analysis was performed by electrospray ionization tandem mass spectrometry (ESI-MS/MS) in the multiple-reaction monitoring (MRM) under positive mode. A good linear calibration was achieved in the 5–1000 ng/ml range. The intra- and inter-day precisions for nimbolide were ≤ 12.6% and ≤ 13.9 % respectively. Intra-day accuracy ranged from 96.9% – 109.3% while inter-day accuracy ranged from 94.3% – 110.2%. The matrix effect of nimbolide, detected but consistent at low and high concentrations, do not affect linearity of standard curve. In conclusion, we have developed and validated a sensitive analytical method for determination of a novel natural compound nimbolide in mouse serum and it has been successfully applied to our preclinical study in investigating the pharmacokinetic properties of nimbolide, which could greatly facilitate the preclinical development of the promising lead compound for anticancer therapy.

Dual-method use is the most reliable form of protection against unintended pregnancies and HIV/STIs. Although dual-method use remains uncommon among women in stable relationships, some women do practice it. In this study, we explored the barriers that make dual-method use rare and the behaviors of women who practice dual-method use using a positive deviance framework in Uganda. We screened 150 women using highly effective contraceptives at five health facilities. We identified nine women who practiced dual-method use and 141 women who did not. In a qualitative study, we conducted in-depth interviews with all nine women practicing dual-method use and 10 women randomly selected out of the 141 who did not. We performed a thematic analysis using the positive deviance framework. Regardless of practicing dual-method use or not, women faced perceived barriers against dual-method use, such as partner’s objection, distrust, shyness about introducing condoms into marital relationships, and limited access to condoms. However, women practicing dual-method use had higher levels of risk perception about unintended pregnancies and HIV/STIs. They also engaged in unique behaviors, such as influencing their partners’ condom use by initiating discussions, educating their partners on sexual risks and condom use, and obtaining condoms by themselves. These findings will be useful in developing effective community-led and peer-based interventions promoting dual-method use to reduce the dual burden of unintended pregnancies and HIV/STIs among women in Uganda.

The recognition of (1→3)-β-D-glucans (BGs) by β-1,3-D-glucan recognition protein (BGRP) found in invertebrates plays a significant role in the activation of toll pathway and pro-phenol oxidase system in insect host defense against fungal invasion. To examine the structural diversity of BGs in BGRP interaction, the binding specificity of BGRPs cloned from four different insectswas characterized using ELISA. Recombinant BGRPs expressed as Fc-fusion proteins of human IgG1 bound to solid phase BGs. Because of the binding specificities, the BGRPs were categorized into two different ultrastructure- binding characters. The BGRPs from Silkworm and Indian meal moth bound to BGs containing triple-helical structure. Other BGRPs from red flour beetle and yellow mealworm beetle showed no binding to triple-helical BGs, but to alkaline-treated BGs, which have partially opened helical conformation. These evidences suggest that the innate immune system distinguishes different BG conformations and it is equipped for the diversity of BG structures.

Energy consumption modelling is of critical importance for improving energy efficiency in the drive towards sustainable manufacturing. Modern manufacturing processes and machine tools are very complex as they involve interplay of several advanced technologies. Therefore, energy modelling of modern machine tools is a complex multi-disciplinary task. This paper proposes a systematic and practical framework to choose the appropriate modelling approach for a given industrial problem. The framework was validated by applying it to diverse industrial scenarios.

Burning mouth syndrome (BMS) is a chronic oral pain disorder. There is a theory that BMS is nociplastic pain. Standard treatment for BMS has not yet been established. Kampo medicine is a traditional oriental medicine. The purpose of this study is to evaluate the effectiveness of rikkosan—a traditional Japanese herbal medicine (Kampo)—in the treatment of BMS. A single-center retrospective study was conducted in 20 patients who were diagnosed with BMS and treated with rikkosan alone (7.5 g) three times daily for approximately 4 weeks. They were treated with rikkosan alone approximately 4 weeks (29.5 ± 6.5 days) for the initial treatment. They had an average age of 63 years and 90% were being treated for other illnesses, but their medication status was the same during this study period, except for rikkosan. No side effects were observed in patients. Numerical rating scale (NRS) or visual analogue scale (VAS)/10 scores decreased significantly between the time of the initiation of rikkosan and the one-month after (-2.1 ± 1.2, p < 0.05). Rikkosan has a short-term effect of reducing NRS by two levels in BMS patients.

The regulation of hepatic very-low-density lipoprotein (VLDL) secretion plays an important role in the pathogenesis of dyslipidemia and fatty liver diseases. VLDL is controlled by hepatic microsomal triglyceride transfer protein (MTTP). Mttp is regulated by carbohydrate response element binding protein (ChREBP) and small heterodimer partner (SHP). However, it is unclear whether both coordinately regulate Mttp expression and VLDL secretion. Here, adenoviral overexpression of ChREBP and SHP in rat primary hepatocytes induced and suppressed Mttp mRNA, respectively. However, Mttp induction by ChREBP was much more potent than suppression by SHP. Promoter assays of Mttp and the liver type pyruvate kinase gene revealed that SHP and ChREBP did not affect the transactivity of each other. Mttp mRNA and protein levels of Shp^/– mice were similar to those of wild-type; however, those of Chrebp^–/–Shp^–/– and Chrebp^–/– mice were much lower. Consistent with this, the VLDL particle number and VLDL secretion rates in Shp^–/–- mice were similar to wild-type, but were much lower in Chrebp^–/– and Chrebp^–/–Shp^–/–- mice. These findings suggested that ChREBP rather than SHP regulates VLDL secretion and that ChREBP and SHP do not affect the transactivities of each other.

(1) Background: This study aims to investigate differences in the perspectives of exercise intensity for resistance exercise of healthcare professionals (HCPs) and adults living with spinal cord injury (SCI) in Asian countries. Also, it verifies the appropriateness of the conventional indicators for resistance exercise intensity in an Asian context; (2) Methods: 121 certified HCPs and 107 adults with SCI participated in a survey conducted in Indonesian, Japanese, Korean and Thai languages. The survey asked what principles are important for prescribing resistance exercise, and if ‘moderate’ and ‘vigorous’ were appropriate terms for indicating an intensity level. Perspective differences were examined between both groups and, further, between countries from a psychosocial perspective; (3) Results: Of the HCPs, 92% perceived that resistance exercise intensity was far more important than frequency, time or type of exercise while frequency (61%) followed by intensity (58%) was perceived as important by respondents with SCI. Only Japanese respondents with SCI agreed with HCP’s perception of intensity. Both HCPs and respondents with SCI showed unfavorable responses on the usage of ‘moderate’ and ‘vigorous’ for describing resistance exercise intensity, especially Japanese HCP and respondents with SCI from Indonesia; (4) Conclusion: Our findings suggest that non-HCPs must improve their perceptions of exercise intensity. Findings also suggest the need for more explicit and user-friendly terms or expressions indicating the level of intensity in a local (Asian) context.

With roots beyond behavioural economics to psychology, nudges can be applied for influencing healthy behaviours such as food choice and portions to decrease obesity for better public health outcomes. However, the effectiveness of the type of nudges are contentious with conflicting literature. In this pilot study, we conducted a 23-day study surveying the food choices that included portion, locus of control, demographic data, and psychological measures of personality, perceived stress, narcissism, regulatory focus, food choice motive and dietary restraint, with the participants given four intervention conditions of 12 instant messaging sent every two days through WhatsApp. The messages were either factual (control), focused on consequences, through social comparison, or persuasive. Running over the COVID19 pandemic, 17 participants completed the full surveys showing significant effects between the experimental conditions with the psychological parameters except for diet confidence and extraversion and conscientiousness, as well as cognitive restraint. We found BMI and waistline measurements to be suitable measurements, with promising results from the fear and social comparison nudges for food-related behaviours and exercise. Our pilot findings have implications to the use of nudges upon which future studies investigating psychological factors can build on.

The clinical significance of carbon-ion radiotherapy (CIRT) for adenocarcinoma (AC) of the uterine cervix has been assessed in several single-institutional studies. To validate the significance, we conducted a multi-institutional survey of CIRT for locally advanced AC (LAAC) of the uterine cervix. We retrospectively analyzed the clinical outcomes of patients with stage IIB–IVA LAAC of the uterine cervix who underwent chemo-CIRT or CIRT alone between April 2010 and April 2016. Patients received 74.4 Gy (relative biological effectiveness [RBE]) in 20 fractions of CIRT or 55.2 Gy (RBE) in 16 fractions of CIRT plus 3 sessions of brachytherapy. Patients aged ≤70 years with adequate bone marrow and organ function were administered cisplatin weekly (40 mg/m2 per week for up to 5 weeks). Fifty-five patients were enrolled in this study. The median follow-up period was 67.5 months. The 5-year overall survival (OS) and local control (LC) rates were 68.6% and 65.2%, respectively. Multivariate analysis showed that the initial tumor response within 6 months was significantly associated with LC and OS. The present study represents promising outcomes of CIRT or chemo-CIRT for LAAC of the uterine cervix, especially in the cases showing initial rapid regression of the tumor.

Delta 9 tetrahydrocannabinol (Δ-9-THC or THC), the primary psychoactive constituent of marijuana, has been found to affect the human body in a variety of ways. According to the Substance Abuse and Mental Health Services Administration (SAMHSA) of the U.S. Department of Health and Human Services, the amount of THC in marijuana has steadily climbed over the past few decades, with today's marijuana having three times the concentration of THC compared to 25 years ago. Inhalation is a major route of exposure, allowing substances to enter the body via the respiratory tract. Therefore, it is imperative to understand the molecular underpinning of THC exposure in the lung epithelium, as lung cells receive significant amounts of THC during marijuana smoking. In this study, the transcriptional alterations caused by various concentrations of THC in non-cancerous human bronchial epithelial cell line (BEAS-2B) were studied. THC exposure (0, 800, 1000, 1200, and 1500 ng/mL) caused a significant dose-dependent decrease in cell viability after 24-hour exposure. Transcriptome analysis showed a distinct dose-dependent response. HIF-1 signaling, ferroptosis, AMPK signaling, and immunogenic pathways were activated by upregulated genes associated with dosing concentration of THC. Glutathione and fatty acid metabolic pathways were significantly altered by THC-dependent downregulated genes. and downregulated genes and their associated pathways in BEAS-2B cells. Ingenuity Pathway Analysis revealed several top canonical pathways altered by THC exposure, among which ferroptosis, NRF-2 mediated oxidative stress response, caveolar mediated endocytosis (loss of cell adhesion to the substrate), tumor microenvironment, HIF1alpha signaling, and the unfolded protein response pathways were the major pathways affected. The top genes that were significantly altered as a result of THC exposure were HMOX1, CDK7, HLA-C, and SLC39A4. Present results suggested that THC exposure can induce a variety of effects, including cell death, which may involve ferroptosis and the NRF-2 signaling pathway. Moreover, the Δ-9-THC-induced cell death was ameliorated by inhibiting the ferroptosis pathway. In contrast, the ferroptosis agonist exacerbated the cell death process, suggesting that Δ-9-THC utilizes the ferroptosis pathway to induce cell death in bronchial epithelial cells.

Outbreaks of the crown-of-thorns seastar (CoTS) represent a major cause of coral loss on the Great Barrier Reef. Outbreaks might be explained by enhanced larval survival supported by higher phytoplankton availability after flood events, yet little is known about CoTS larvae feeding behaviour, in particular their potential for selective feeding. Here, single- and mixed-species feeding experiments were conducted on CoTS bipinnaria larvae using five algae (Phaeodactylum tricornutum, Pavlova lutheri, Tisochrysis lutea , Dunaliella sp. and Chaetoceros sp.) and two algal concentrations (1000 and 2500 algae mL^-1). Cell counts using flow-cytometry at the beginning and end of each incubation experiment allowed us to calculate the filtration and ingestion rates of each species by CoTS larvae. In line with previous studies, CoTS larvae ingested more algae when initial algal concentration was higher. We found evidence for the selective ingestion of some species (Chaetoceros sp., Dunaliella sp.) over others (P. lutheri, P. tricornutum). The preferred algal species had the highest energy content, suggesting that CoTS selectively ingested the most energetic algae. Ultimately, combining these results with spatio-temporal patterns in phytoplankton communities will help elucidate the role of larval feeding behaviour in determining the frequency and magnitude of CoTS outbreaks.

Frailty, an age-related decline in homeostatic reserves, markedly proceeded during the coronavirus disease 2019 pandemic. To continuously assess frailty status, a remote system is urgently required. We aimed to co-design/co-develop an online frailty check (FC) application alongside FC supporters who were facilitators in a pre-existing onsite FC program. The online FC included a screening measurement for sarcopenia and an 11-item questionnaire covering dietary, physical, and social behaviors. Using prototype applications, 55 opinions obtained from 32 FC supporters (median 74.0 years) were categorized and reflected refinement. Regarding the self-efficacy of FC supporters, a significant increase in social positioning was seen after the mock test (P=.031). For FC supporters and participants, the average system usability scale (SUS) score was 70.2±10.3 points, which was “marginally high” for acceptability and “good” for the adjective range. Multiple regression analysis showed that the SUS score was significantly correlated with online-onsite reliability but not online communication, even after adjusting by age, sex, education level, and ICT proficiency (b=0.400, 95% CI: 0.243-1.951, P=.013). Additionally, a significant association between onsite and online FC scores was observed (R=0.670, P=.001). Our online FC application was evaluated to be a valuable tool to practically assess frailty status remotely.