A chairside polishing kit is an alternative to a laboratory polishing technique. This study aimed to evaluate the effects of different polishing techniques on the surface roughness of three-dimensional (3D)-printed acrylic denture bases (ADB). One hundred twenty disc-shaped specimens were fabricated from one conventional heat-polymerized (HP) ADB resin and two 3D-printed (Asiga (AS) and NextDent (ND)) ADB resins (n=40 per ADB resin). Each group was furtherly divided based on the polishing protocol (n=10) as follows: convectional polishing protocol (C), Microdont chairside polishing kit (M), Shofu chairside polishing kit (S), and unpolished group (U). The surface roughness (surface roughness average (Ra) and average maximum profile height (Rz)) of the printed specimens were measured using an optical profilometer, and the scanning electron microscope (SEM) was used to capture the surface at ×1000. Two-way ANOVA and post hoc tests were used for data analysis (α = 0.05) at significant levels. In unpolished groups, there was a statically significant difference between HP vs 3D-printed ADBs (p < 0.0001). For Ra values, the lowest values were presented in HP-C, AS-S, and ND-C. While the highest values were shown in all unpolished groups. Within the material, there were statistically significant differences between the three polishing protocols (C, M, and S) vs unpolished (p < 0.0001), while there was no significant between C, M, and S groups (p = 0.05). The Rz values had the same pattern as the Ra values. The two chairside polishing kits were comparable to conventional polishing technique, and it could be recommended for the clinical application.

Bayesian analysis for masked data under competing risk frameworks is studied for the purpose of assessing the impact of covariates on the hazard functions when the failure time is exactly observed for some subjects but only known to lie in an interval of time for the remaining subjects. Such data, known as partly interval-censored data, usually result from periodic inspection. Dirichlet and Gamma processes are assumed as priors for masking probabilities and baseline hazards. The Markov Chain Monte Carlo (MCMC) technique is employed for the implementation of the Bayesian approach. The effectiveness of the proposed model is tested through numerical studies, including simulated and real data sets.

Hospital-acquired infections (HAIs) contribute to increased length of hospital stay, high mortality and higher health-care costs. Prevention and control of HAIs is a critical public health concern. We conducted a cross-sectional survey of 213 hospital health-care workers in Qassim, Saudi Arabia. We assessed Knowledge, Attitude and Practice (KAP) of standard infection control precautions using a structured questionnaire. Predictors of KAP were investigated using multivaraible logistic regression analyses and independent sample t tests. Prevalence of good (≥80% correct response) knowledge, attitude and practice were 67.6%, 61.5% and 73.2%, respectively. Predictors of good knowledge included age over 34 years (adjusted odds ratio: 30.5, p<0.001), and receiving training (13.3, p<0.001). Predictor of positive attitude was having >6 years of experience (5.5, p<0.001). While, the predictors of good practice were having >6 years of experience (2.9, p<0.01), previous exposure to HAIs (2.5, p<0.05) and training (3.5, p<0.01). However, being female (0.22, p<0.001) and older (>34 years) (0.34, p<0.01) were negatively associated with knowledge. Results indicate that older academic programs might not have adequately covered infection crontrol. Arranging training for HCWs might be useful in improving their knowledge of standard infection control precautions and is also expected to facilitate positive attitude and practice.

In this project, four of fibers Bragg gratings were fabricated by injecting different volumes of liquids (star line Glass Mechanix optical adhesive material, olive oil diluted with ethanol) into the hollow core fiber. The amplitude splitting interferometric technique with a high resolution specially designed translation stage was used for the fabrication process. The fabrication was done using ultraviolet laser operated at wavelength 405nm. The fabricated Bragg length of the four fibers is equal to 3.8 cm. The results presented fiber Bragg grating (FBG) with successful fabrication at 653.3 nm Bragg reflected wavelength.

5-(4-aminophenyl )-2-amino -1,3,4-thiadiazole was prepared by reaction of Thiosemicarbazide with 4-amino benzoic acid under reflux condition for 7 hours. The compound which has been synthesized successfully was subjected to addition reaction with 4-(Dimethylamino) benzaldehyde under reflux condition for 6 hours to synthesize Schiff bases. These compounds was characterized by using FTIR) and evaluated for their anticancer activity. The effect of (1, 3, 4-thiadiazole derivative) on the activity of malignant cells was studied by using different types of cell lines [Breast cancer, and human prostate cancer]. And was used the Electron microscope to show that the effect of the derivative on the cancer cells before and after 3 days of the injection time. It was found that the Schiff base of thiadiazole-1,3,4-(Dimethylamino)benzylidineamino]- [4-2-phenyl]amino was effective in reducing the size and density of malignant cells. That of 46.7 while in breast ) 145(DUprostate for growth inhibition produce of equal 85.9 µg/ml.

This study provides the bibliographical analysis of the articles produced by various authors from the year 1965 to 2017. Bibliometric approach is used to analyze data that is provided through standard statistical calculations. Findings indicated that, the highest rate of researches were produced during 1980s, with the average publication of 28.6 articles each year. Findings further indicated that the ratio of male population was high in producing articles, where most of the articles were based on single authorship. The analysis of the trend in terms of article type indicated researchers high level interest in producing biographies during 90s, which was then shifted to the production of articles related to library management after the beginning of 2000. Following the findings of this study, it is suggested to encourage researchers to explore diverse topics that lacked the interest of different authors.

A new class of nano-cube core-shell heterostructures containing Ag coating on the top of WO₃ was fabricated. Physical vapor deposition was used to produce WO₃ based nano-heterostructures. All kind of wet toxic chemical process was avoided to make the process simple and contaminant free. Sputtering of WO₃ and a subsequent thermal annealing process was done to create nano-cubes of WO₃. After that, sputtering of Ag was performed to form the Ag-WO₃ core-shell nano-heterostructures (CSNH). The CSNHs were characterized using field emission scanning electron microscopy (FESEM), energy dispersive spectroscopy (EDS), X-ray diffraction analysis (XRD) and UV-vis spectroscopy. The morphologies, elemental analysis, interfaces, crystallinity, phases, and chemical compositions were analyzed. The bottom-up growth of WO₃ nanocubes was studied using different time periods at 900°C. Ag coating was also studied before and after annealing. Finally, an optical property (band gap) was also analyzed using Tauc plot derive from absorption spectra. The tailoring the band gap of WO₃ from ~2.9eV to ~ 2.45 eV was observed while Ag-WO₃ CSNH formed.

The global spread of coronavirus disease (COVID -19) worldwide has had a significant effect on social and economic growth. The contamination keeps on advancing quickly and eccentrically, representing a significant test to its recognition and conclusion. Coronaviruses are commonly recognized by seclusion from tests, regardless of whether natural or clinical, utilizing some atomic science procedures, which can take a few days. In this work an analytical review of virus transmission, methods of diagnosing COVID -19 using artificial intelligence techniques to classify images and types of biosensors. At long last, the deformities and points of interest of each kind of sensor are recognized and examined. This exploration gives an explanatory audit of the utilization of crown infection COVID-19 in 2019. Related examinations were led utilizing five dependable databases, for example, Science Direct, IEEE Xplore, Scopus, Web of Science, and PubMed. An acceptable investigation is remembered for this audit, which can be depended upon as a logical database to put resources into another technique for recognizing COIVD-19.

Background: Papillomaviruses (PVs) are double-stranded DNA viruses and are more common in skin of ruminants in Iraq. A P53 (tumor suppressor protein) reveals an essential role in cell cycle control. This study aimed to describe the clinical, histopathological and immunohistochemical aspects of naturally occurring cutaneous ruminant’s papillomatosis. Methods: Samples were collected from totally, 10 animals (3 cattle, 3 goats and 4 sheep) with multiple papillomatosis lesions. Results: Clinically, exophytic multiple, cauliflower-like growths (warts) of varying sizes (0.5-11 cm) were found in different areas of the animal’s bodies. Histopathological features were various degrees of koilocytosis, ortho and parakeratotic, hyperkeratosis, hypergranulosis in granular layer and acanthosis. Immunohistochemical (IHC) investigations revealed some nuclei in the granular and basal layers of the epidermis with intense positivity for papillomavirus antigen. All tumor samples were positive for p53 expression that appeared as a strong cytoplasmic and perinuclear staining mainly in the basal and parabasal layers. Conclusion: this study described the papillomavirus lesions in bovine, ovine and caprine, that located in different anatomical areas with minor variations in histopathological features. The tumor samples showed positive results for PV antigen and P53 expression that considered as the useful markers in the diagnosis of cutaneous papilloma.

Needlestick and other sharp injuries (NSIs) are critical occupational hazard for healthcare workers. Exposure to blood and body fluids through NSIs increases the risk of transmission of blood-borne pathogens among them. The objectives of this study were to estimate the one-year incidence of NSIs and investigate its associated factors among the healthcare workers in Saudi Arabia. A cross-sectional online survey was conducted between October and November 2021. A total of 361 healthcare workers participated in the survey from all over Saudi Arabia. The one-year incidence of NSIs among healthcare workers is estimated at 22.2%. More than half of the injury event (53.8%) was not reported to the authority by the healthcare worker. Incidence of NSIs was highest among the physicians (36%) and is followed by nurses (34.8%), dentists (29.2%), and medical technologists (21.1%). The likelihood of injury is higher (OR: 2.51; 95% CI: 1.04, 6.03) among the works aged 26 – 30 years compared to the 20 – 25 years age group and the workers directly deal with needles or other sharp objects while working (OR: 5.90; 2.69, 12.97). The high incidence rate of injury and low reporting rate highlight the needs of an education program targeting healthcare providers with higher risk.

The inhibition impacts of 1,10-Phenanthroline-5,6-diamine (PTDA) on mild steel in 1 M HCl solution were investigated through weight loss method. The inhibition efficiencies of PTDA increase with increase in PTDA concentration at the temperature 303. Weight loss method indicate that PTDA is an excellent inhibitor the inhibition efficiency of 81.5% at the maximum PTDA concentration of 0.5 g/L at the temperature 303K.

Coronavirus Disease 2019 (COVID-19) exhibits a significant variation in presentation of symptoms ranging from mild to severe life-threatening symptoms, including death. COVID-19 infection susceptibility has been linked with various covariates, but studies in Qatar are limited. Data from Qatar Biobank (QBB) (n = 10,000; 18- to 79-year-old adults) were analyzed for associations between sociodemographic and lifestyle factors and susceptibility to COVID-19. Logistic regression was used to assess the associations between COVID-19 and age, gender, body mass index (BMI), smoking status, education level, dietary patterns, supplement use, physical activity, history of bariatric surgery, diabetes, and hypertension. In total, 10.5% (n = 1045) of the participants had COVID-19. Compared to non-smokers, current and ex-smokers had lower odds of having COVID-19 (odds ratio [OR]= 0.55; 95% CI: 0.44-0.68 and OR= 0.70; 95% CI: 0.57-0.86, respectively). Vitamin D supplement use was associated with an 18% reduction of the likelihood of contracting COVID-19 (OR = 0.82; 95% CI: 0.69-0.97). Obesity (BMI ≥30 kg/m2), history of bariatric surgery and higher adherence to the modern dietary pattern– characterized by consumption of foods high in saturated fat and refined carbohydrates– were positively associated with COVID-19. Our findings indicate that adopting a healthy lifestyle may be helpful in the prevention of COVID-19 infection.

Enterobacteriaceae can contaminate meat during various stages of processing, including slaughter, evisceration, and butchering, causing foodborne illnesses. The purpose of the study was to investigate the prevalence of Enterobacteriaceae associated with carcasses obtained from slaughterhouses and raw cut meat collected from butcher shops. A total of 120 samples of camels and cattle were identified using biochemistry and PCR testing. Total viable count (TVC) was range from 4.91 to 5.37 Log10 CFU/g in slaughterhouses and butcher shops. E. coli was predominating with 84 (70%) among all samples, where the camels had the highest with 100% and sheep the lowest with 30%. Salmonella spp. was confirmed in 40% of camel samples, 47.5% of cattle samples, and 32.5% in sheep samples. Twenty-five Enterobacteriaceae genera were confirmed using PCR. Where sheep’s samples had the highest occurrence of Enterobacteriaceae with 15 different genera followed by camels and cattle samples with 14 different genera. The prevalence of Enterobacteriaceae among camel, cattle, and sheep carcasses raises significant concerns regarding food safety. Adherence to good hygiene practices throughout animal slaughtering is crucial to minimize the risk of infection and transmission and ensure food safety.

Over the past decade, Deep Learning (DL) had been applied in a large number of optical sensors’ applications. DL algorithms can improve the accuracy and reduce the noise level in optical sensors. Optical sensors are considered as promise technology for the modern intelligent sensing platforms. These sensors are widely used to process monitoring, quality prediction, pollution, defense, security and many other applications. However, they suffer major challenges such as the large generated data and low processing speed for that data and moreover the much cost of these sensor. These challenges can be mitigated by integrating deep learning system with the optical sensor technologies. This paper presents recent studies that integrate DL algorithms with optical sensors applications. This paper also highlights several of DL algorithms directions that promise a considerable impact on use for optical sensor applications. Moreover, this study provides new directions for the future related research development.

In this paper we introduce the concept of Nano Beta Closure, Nano Beta Interior and study the relationship between them also study some of their properties. Based on these notions we introduced the topological Approach to Decision Making and Its Application in the Medical Field" which describes the use of topological methods in decision-making, specifically through the utilization of nano beta closure and nano beta interior. These mathematical tools are applied in the medical field to improve diagnostic accuracy and aid in treatment planning. The authors demonstrate the effectiveness of this approach through a case study on the diagnosis of Chronic Kidney. The results show that the topological approach using nano beta closure and nano beta interior provides a reliable and accurate method for medical decision-making. Finally, we introduce a medical application for disease groups patients of with chronic kidney. To identify the main causative agent of kidney disease. where using this approach, the medical team can identify the specific areas of the kidney that are affected by the infection, as well as the extent of damage and any potential complications. This information is used to create an individualized treatment strategy that is customized to meet the specific requirements of the patient. and medical history. We write an algorithm that can be a helpful tool for doctors to utilize in diagnosing infection disease Chronic Kidney infections. By utilizing this approach, clinicians can provide accurate diagnoses, develop effective treatment plans, and ultimately improve patient outcomes. finally, we show that fractals hold significant importance in future nano topological generation of the human factor. Their unique properties and self-similar patterns offer insights into the complex organization of biological systems and provide a foundation for designing advanced Nanosystems.

Background: Despite their generally favorable prognosis, hepatic fibrosis remains a possible complication for hepatitis B virus (HBV) inactive carriers. This study aimed to estimate the prevalence of significant fibrosis and associated risk factors among Omani HBV inactive carriers. Methods: A retrospective study was conducted of 200 Omani HBV inactive carriers visiting a tertiary hospital in Muscat, Oman, between January 2017 and December 2018. Significant fibrosis (stage F2 or higher) was identified using two-dimensional shear-wave elastography. Baseline clinical, laboratory, and radiological data were analyzed to determine associations. Results: Of the total sample, 106 patients (53%) were male, and the mean age was 44.6 ± 9.3 years. The prevalence of significant fibrosis was 20% (n = 40). Male gender (p = 0.007), age ≥60 years (p = 0.024), and fatty changes in liver ultrasound (p = 0.044) were found to be independent factors for significant fibrosis. Conclusion: the prevalence of significant fibrosis was relatively high among a sample of Omani HBV inactive carriers, with several sociodemographic and clinical risk factors identified. Periodic assessment of liver function is needed for patients with these risk factors; moreover, routine biochemical parameters could be useful predictors of disease prognosis. Further research is recommended to substantiate these findings.

Annually, more than 1.5 million preventable new hepatitis B (HBV) infections continue to occur, with an estimated global burden of 296 million individuals living with chronic hepatitis B infection. This substantial health challenge results in over 820,000 annual deaths attributed to complications such as liver cirrhosis and hepatocellular carcinoma (HCC). HBV vaccination remains the cornerstone of public health policy to prevent chronic hepatitis B and its related complications. It serves as a crucial element in the global effort to eliminate HBV, as established by the World Health Organization (WHO), with an ambitious 90% vaccination target by 2030. However, reports on global birth dose coverage reveal substantial variability, with an overall coverage rate of only 46%. This comprehensive review thoroughly examines global trends in HBV vaccination coverage, investigating the profound impact of vaccination on HBV prevalence and its consequences across diverse populations, including both high-risk and general demographics. Additionally, the review addresses the formidable challenges and facilitating factors essential for achieving WHO's HBV vaccination coverage objectives and elimination strategies in the coming decade and beyond.

In recent years, Neural networks are increasingly deployed in various fields to learn complex patterns and make accurate predictions. However, designing an effective neural network model is a challenging task that requires careful consideration of various factors, including architecture, optimization method, and regularization technique. This paper aims to comprehensively overview the state-of-the-art artificial neural network (ANN) generation and highlight key challenges and opportunities in machine learning applications. It provides a critical analysis of current neural network model design methodologies, focusing on the strengths and weaknesses of different approaches. Also, it explores the use of different learning approaches, including convolutional neural networks (CNN), deep neural networks (DNN), and recurrent neural networks (RNN) in image recognition, natural language processing, and time series analysis. Besides, it discusses the benefits of choosing the ideal values for the different components of ANN, such as the number of Input/output layers, hidden layers number, activation function type, epochs number, and model type selection, which help improve the model performance and generalization. Furthermore, it identifies some common pitfalls and limitations of existing design methodologies, such as overfitting, lack of interpretability, and computational complexity. Finally, it proposes some directions for future research, such as developing more efficient and interpretable neural network architectures, improving the scalability of training algorithms, and exploring the potential of new paradigms, such as Spiking Neural Networks, quantum neural networks, and neuromorphic computing.

The fast-paced evolution of artificial intelligence (AI), machine learning (ML), natural language processing (NLP), large language model (LLM) applications, and generative pre-trained transformer (GPT) have set the stage for improved and autonomous project scheduling models. This study demonstrates how project scheduling can be enhanced by employing building information modeling (BIM) to predict reliable schedules for each project element. The research is based on design science research (DSR) methodology and focus group discussion. The proposed system consists of six components: project analyzer, data warehouse, activity identifier and sequencing, activity magnitude and direct cost calculator, activity duration calculator, and schedule analyzer. Unlike other solutions, the proposed solution sequences activities based on an ML model rather than constraint matrices. The proposed solution thus enhances project performance through proactive planning and risk management. Integrating the autonomous project scheduling solution with the other components of an autonomous project management system would surmount schedule challenges and would result in greater cost efficiency and fewer delays.

Cloud infrastructure provides computing services where computing resources can be adjusted on-demand. However, the adoption of cloud infrastructures brings concerns like reliance on the service provider network, reliability, compliance for service level agreements (SLAs), etc. Software-defined networking (SDN) is a networking concept that suggests the segregation of a network’s data plane from the control plane. This concept improves networking behavior. In this paper, we present an SDN-enabled resource-aware topology framework. The proposed framework employs SLA compliance, Path Computation Element (PCE) and shares fair loading to achieve better topology features. We also present an evaluation, showcasing the potential of our framework.

Chenodeoxycholic acid (CA) is a naturally occurring bile acid that is produced in the liver from cholesterol. Three CA complexes using Zn(II), Mg(II), and Ca(II) ions were synthesized to examine the chelation tendencies of CA towards these metal ions. The complexation reaction of CA with the metal ions under investigation was conducted with a 1:1 molar ratio (CA to metal) at 60-70°C in natural media (pH 7-8), which consisted of a binary solvent of MeOH and H2O (1:1). The resulting CA complexes were characterized using analytical data (metal, H, C, and Cl, analysis) and spectral data (UV-visible, FT-IR, and 1H NMR) to elucidate the complexes’ structures. The results suggested that CA in anion form utilized oxygen atoms of the carboxylate group (-COO−) to capture Zn(II), Mg(II), and Ca(II) ions. This produced complexes with the general compositions of [Zn(CA)(H2O)Cl], [Mg(CA)(H2O)Cl]H2O, and [Ca(CA)(H2O)Cl]2H2O, respectively. The Kirby-Bauer disc diffusion assay was then used to explore the bioactivity of the CA complexes toward three fungal species, three Gram-positive bacteria, and two Gram-negative bacteria. The Ca(II) and Mg(II) complexes exhibited marked inhibitory effects on the cell growth of the fungal species Aspergillus niger with potency equal to 127% and 116% of the activity of the positive control, respectively. The Zn(II) and Ca(II) complexes strongly inhibited the growth of Penicillium sp., while the Zn(II) and Mg(II) complexes showed strong growth inhibition towards the Gram-negative species Pseudomonas aeruginosa.

Osteopetrosis incidence is less than 1:200,000 birth in most populations (Worth, 1963) . It's more common in consanguineous people as it's unusual in two members of the same family. The defined treatment for Osteopetrosis is Hematopoietic stem cell transplantation (HSCT). With a 73% five years disease-free survival in donors. The incidence of Hypertrophic pyloric stenosis is 1 in 300–900 newborns. Hypertrophic pyloric stenosis is due to hypertrophy of the smooth muscle of the pyloric sphincter. The classic age of occurrence is the first few months of life, and the classic presentation is non-bilious projectile vomiting after feeding. We reported a four family members with Osteopetrosis and Pyloric stenosis and their three cousins with Osteopetrosis, which is a very rare presentation and association.

Lomefloxacin (F1) and pefloxacin (F2) have a broad spectrum of antimicrobial activities against Gram-positive and Gram-negative bacteria. In this study, we investigated the complexation mode, morphological and biological properties of four metal-based complexes of F1 and F2 molecules with Mg(II), Ca(II), Zn(II), and Fe(III) metal ions. These complexes were prepared at ~60–70°C in a neutral medium using a 5% NH3 solution at pH ~7-8 with a 1:1 ratio. Multiple physicochemical methods were employed to characterize the binding mode between F1 and F2 with the metal ions under investigation. The results of these methods suggested that the gross formula of the complexes obtained with the metal ions were [MgF1(H2O)Cl]2H2O, [CaF1(H2O)Cl]3H2O, [ZnF1(H2O)Cl], [FeF1(H2O)2Cl2]Cl2H2O, [MgF2(H2O)Cl]2H2O, [CaF2(H2O)Cl]3H2O, [ZnF2(H2O)Cl], and [FeF2(H2O)2Cl2]Cl2H2O. The microscopic characterizations indicated that the Ca(II)-F1 complex had an interesting surface topography. Its particles had a homogenous, short, rod-like shaped structure that clustered together to form a tree shape. Using the Kirby-Bauer disc diffusion protocol, the synthesized metal-based complexes were screened in vitro against different Gram-positive and Gram-negative bacterial and fungal species. The antimicrobial profile of the Fe(III)-F1 complex indicated that it had remarkable inhibitory activity against all the tested bacterial and fungal species with potency equal to that of the standard drugs (streptomycin and ketoconazole).

Interest in developing novel crop protectants has gained attention in the recent decade due to the hazardous effects of synthetic pesticides on humans and the environment. The citrus industry worldwide is threatened by the D. citri, the primary vector of phlo-em-limited bacterium (HLB) or citrus greening. However, there is no cure for citrus greening available. Diaphorina citri management largely depends on synthetic insecticides, but their massive application leads to resistance in pest populations. Therefore, alternative pest management strategies are needed. Our results indicated fewer D. citri adults settled on plants treated with ABEO than on control 48 h after re-lease. The psyllid fed on citrus leaves treated with ABEO significantly secreted less honeydew than the control. The essential oil showed potent ovicidal activity against the D. citri eggs with LC50 5.88 mg/mL. Furthermore, we also explore the fitness of D. citri on ABEO-treated and untreated Citrus × sinensis by using two-sex life table tools. The results indicated that the intrinsic rate of increase (r) was higher on untreated seedlings (0.10 d−1) than those treated with a sub-lethal dose of ABEO (0.07 d−1). Similarly, the net re-productive rate (R0) was higher for untreated seedlings (14.21 offspring) than those treated (6.405 offspring). Notably, the ABEO were safer against Aphis melifera, with LC50 ranging from 31.05 to 55.86 mg/mL, which is relatively higher than the LC50 24.40 mg/mL values against D. citri. Our results indicate that ABEO exhibits toxic and behavioral effects on D. citri that could be useful for managing this pest.

Adipocytes play a critical role in maintaining a healthy systemic metabolism by storing and releasing energy in the form of fat and helping to regulate glucose and lipid levels in the body. Adipogenesis is the process through which pre-adipocytes are differentiated into mature adipocytes. It is a complex process involving various transcription factors and signaling pathways. Dysregulation of adipogenesis has been implicated in the development of obesity and metabolic disorders. Therefore, understanding the mechanisms that regulate adipogenesis and the factors that contribute to its dysregulation may provide insights into the prevention and treatment of these conditions. RNA Binding Motif Single Stranded Interacting Protein 1 (RBMS1) is a protein that binds to RNA and plays a critical role in various cellular processes such as alternative splicing, mRNA stability, and translation. The RBMS1 polymorphism has been shown to be associated with obesity and Type 2 diabetes, but the role of RBMS1 in adipose metabolism and adipogenesis is not known. We show that RBMS1 is highly expressed during the early phase of differentiation of the murine adipocyte cell line 3T3-L1 and is significantly upregulated in adipose tissue depots and adipocytes of high-fat-fed mice, implying a possible role in adipogenesis and adipose metabolism. Knockdown of RBMS1 in pre-adipocytes impacted the differentiation process and reduced the expression of some of the key adipogenic markers. Transcriptomic and proteomic analysis indicated that RBMS1 depletion affected the expression of several genes involved in major metabolic processes, including carbohydrate and lipid metabolism. Our findings imply that RBMS1 plays an important role in adipocyte metabolism and may offer novel therapeutic opportunity for metabolic disorders such as obesity and type 2 diabetes.

The chemical reaction between the quinolone antibiotic oxolinic acid (OA) and Fe(III), Zn(II), Ca(II), and Mg(II) ions results in the formation of metal-based complexes with the following formulas: [Fe(OA)(H2O)2Cl2]2H2O, [Zn(OA)(H2O)Cl]2H2O, [Ca(OA)(H2O)Cl], and [Mg(OA)(H2O)Cl]. We used analytical (C, N, H, Cl, metal analysis) and spectral (FT-IR, 1H NMR, UV-visible) data to structurally characterize the synthesized metal-based complexes of the OA molecule. We found that the OA molecule utilizes the two oxygen atoms of the carboxylate group and the pyridone C=O group to bind the investigated metal ions. The morphological properties of the synthesized OA complexes were assessed using X-ray powder diffractometry (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The biological properties, specifically antibacterial and antifungal activity, of the synthesized complexes were evaluated in vitro using the Kirby-Bauer disc diffusion protocol with five bacterial and three fungal strains. The complex containing Ca(II) ions exhibited remarkable antibacterial and antifungal activity against all tested microbial strains, surpassing or equaling the potency of the standard drugs (streptomycin for antibacterial assays and ketoconazole for antifungal assays).

The Impact of Event Scale-Revised (IES-R) is the most popular measure of post-traumatic stress disorder (PTSD), which has been recently validated in Arabic. This instrumental study aimed to determine optimal cutoff scores of the IES-R and its subscales in Arab samples of psychiatric patients (N = 168, 70.8% females) and healthy adults (N = 992, 62.7% females) from Saudi Arabia during the COVID-19 pandemic as an ongoing collective traumatic event. Based on a cutoff score of 14 of the Depression Anxiety Stress Scale 8-items (DASS-8), receiver operator curve (ROC) analysis revealed two optimal points of 39.5 and 30.5 for the IES-R in the samples (area under the curve (AUC) = 0.86 &amp; 0.91, p values = 0.001, 95% CI: 0.80-0.92 &amp; 0.87 to 0.94, sensitivity = 0.85 &amp; 0.87, specificity = 0.73 &amp; 0.83, Youden index = 0.58 &amp; 0.70, respectively). Different cutoffs were detected for the six subscales of the IES-R, with numbing and avoidance expressing the lowest predictivity for distress. Meanwhile, hyperarousal followed by the irritability expressed stronger predictive capacity for distress than all subscales in both samples. In path analysis, pandemic-related irritability resulted from direct and indirect effects of key PTSD symptoms (intrusion, hyperarousal, and numbing). Irritability contributed to traumatic symptoms of sleep disturbance in both samples while the opposite was not true. The findings suggest usefulness of the IES-R at a score of 30.5 for detecting adults prone to trauma related distress, with higher scores needed for screening in psychiatric patients. Various PTSD symptoms may induce dysphoric mood, which represents a considerable burden that may induce circadian misalignment and more noxious psychiatric problems/ co-morbidities (sleep disturbance) in both healthy and diseased groups.

Inorganic nanoparticles based on magnetite improve the mechanical, thermal, and magnetic properties of microporous cryogel polymer composites. Here we report the synthesis of microporous cryogel based on the crosslinked sodium vinyl sulfonate (Na-VS) and 2-acrylamido-2-methylpropane sulfonic acid sodium salt (Na-AMPS). The magnetite nanoparticles were inserted into Na-VS/Na-AMPS cryogel either during its crosslinking polymerization or by in-situ technique after its crosslinking. The morphology, particle sizes, thermal stability and magnetite contents of Na-VS/Na-AMPS cryogel and its magnetite composites were investigated. The prepared Na-VS/Na-AMPS cryogel and its magnetite composites were used as adsorbents for methylene blue (MB) cationic dye using optimum conditions. The magnetite Na-VS/Na-AMPS cryogel composite prepared by in-situ technique achieved the best adsorption MB removal capacity for 7 cycles among the other adsorbents via chemical adsorption mechanism at room temperature.

Introduction: COVID-19's emergence caused devastating consequences worldwide, with high morbidity and mortality rates. Critically ill patients face challenges like acute respiratory failure requiring intensive measures, including mechanical ventilation. Mortality rates in ARDS are influenced by various factors. This paper focuses on describing characteristics, management, and survival factors of mechanically ventilated ICU patients in Saudi Arabia. Methods: a retrospective, noninterventional approach, we reviewed charts and data of all COVID-19-infected patients who were admitted to the ICU, particularly those requiring ventilation support at Aseer Central Hospital (ACH) in the southern region of Saudi Arabia. Results: The study enrolled 594 COVID patients, mean age 60.5 ± 17.3 years, with 67% males. Approximately half had O negative blood group. Common chronic health issues: diabetes mellitus (35.5%). Positive culture findings in almost 340 (57.2%), with Klebsiella pneumoniae being the most isolated microorganism (45.5%). Significant correlations found with mortality: age, blood culture, Rh positive group (P<0.05). Conclusion: this study provides critical insights into the clinical and epidemiological aspects of COVID-19 patients admitted to the ICU in a Saudi Arabian hospital. The research underscores the impact of age, comorbidities, laboratory markers, and treatment interventions on patient out-comes, emphasizing the significance of tailored management strategies in this context.

Traumatic brain injury (TBI) is among the leading causes of mortality and long-term impairment globally. TBI has a dynamic pathology encompassing a variety of metabolic and molecular events that occur in two phases, primary and secondary. An external forceful blow to the brain initiates the primary phase, which is followed by a secondary phase that involves the release of calcium ions (Ca2+) and the initiation of a cascade of inflammatory processes, including mitochondrial dysfunction, rise in oxidative stress, activation of glial cells, and damage to the blood-brain barrier (BBB), resulting in paracellular leakage. There is currently no FDA-approved drug for TBI, but existing approaches rely on delivering small and macromolecular treatments, which are severely constrained by the BBB, poor retention, off-target toxicity, and complex pathology of TBI. Therefore, there is a demand for innovative and alternative therapeutics with effective delivery tactics for diagnosis and treatment of TBI. Tissue engineering and use of biomaterials is one such alternative approach. With this approach, neuronal stem cell therapy is combined with synthetically generated tissue materials such as hydrogels, self-assembling peptides, and electrospun nanofibers, which may induce neurite outgrowth, differentiation of human neural stem cells, and nerve gap bridging in TBI. This review examines tissue engineering and the use of biomaterials as potential treatments for TBI, including their synthesis, mechanisms of action, and limitations. The review also discusses challenges facing tissue engineering and biomaterial technology including survival rate of transplanted stem cells and the development of biodegradable, biocompatible, and mechanically flexible biomaterials. A better understanding of the mechanisms and drawbacks of these novel therapeutic approaches will help guide the design of future TBI therapies.

Cybercrimes are becoming a bigger menace to both people and corporations. It poses a serious challenge to the modern digital world. According to a press release from 2019 Cisco and Cybersecurity Ventures, Cisco stopped seven trillion threats in 2018, or 20 billion threats every day, on behalf of its clients. According to Cybersecurity Ventures, the global cost of cybercrime will reach $6 trillion annually by 2021, which is significantly more than the annual damage caused by all natural disasters and more profitable than the global trade in all major illegal narcotics put together. Botnets are the most common and have a significant negative impact on any civilization among malware programmes. As a result, this study will explore various P2P botnet detection algorithms by outlining their essential characteristics, advantages and disadvantages, obstacles, and future research.

Artificial intelligence is dramatically transforming medical imaging. We assessed the levels of artificial intelligence use among radiology trainees and explored their perceived impact of artifi-cial intelligence on the radiology workflow and radiology profession, in correlation with the perceived ease of use and behavioral intention to use artificial intelligence. This cross-sectional study enrolled radiology trainees from Saudi Arabia, and an online 5-part-structured question-naire was disseminated via online networks to trainee in July 2021. We included 98 participants (51 male; age 27.59±2.02 years). Level of use was low; few used it in routine practice (7%). The impact of artificial intelligence on the radiology workflow was positively perceived in all radi-ology workflow steps (3.64–3.97 out of 5). A positive impact on the radiology profession was more frequently perceived for technical and performance aspects (81%–85%) compared with prestige and legal aspects (64%–71%). Perceived ease of use and behavioral intention to use arti-ficial intelligence was associated with the current professional activity, level of use artificial in-telligence use, and perceived impact on the profession as well as on radiology workflow (p<0.05). Levels of artificial intelligence use in radiology are very low. The perceived positive impact of ar-tificial intelligence on radiology workflow and profession is correlated with an increase in be-havioral intention to use artificial intelligence. Thus, increasing awareness about the favorable impact can improve the behavioral use.

Background: In spinal cord injury, radical treatment is still a persistent hope for patients and clinicians. Our study aimed to determine the different histological changes in central, cranial and caudal sites of compressed spinal cord as a result of neuroectodermal stem cells (NESCs) transplantation in rats. Material and methods: For extraction of NESCs, future brains were extracted from mice embryos (10-days old) and cultured. Eighty, male rats were divided randomly into control, sham (20 rats each); while 40 rats were subjected to compressed spinal cord injury (CSCI). Seven days after spinal cord injury, rats were subdivided into 2 groups (20 rats each); an untreated and treated with NESCs injected cranial and caudal to the site of the spinal cord injury. Rats were sacrificed 4 weeks after transplantations of NESCs and specimens from the spinal cord at the central, cranial and caudal to site of spinal cord injury were proceeded to be stained with haematoxylin & eosin, osmic acid and Immunohistochemistry of glial fibrillary acidic protein (GFAP). Results: Sections of CSCI revealed areas of hemorrhages, necrosis and cavitation limited by reactive astrocytosis, with upregulation of GFAP expression. Evidence of remyelination and mitigation of histopathological features, reactive astrocytosis in CSCI sections were more pronounced in cranial than in caudal region. Conclusions: NESCs transplantation ameliorated the pathological changes, promoted remyelination.

The keyless systems have replaced the old fashion methods of inserting physical keys in the keyhole to, i.e., unlock the door, because they are inconvenient and easy to be exploited by the threat actors. Keyless systems use the technology of radio frequency (RF) as an interface to transmit signals from the key fob to the vehicle. However, Keyless systems are susceptible to being compromised by a thread actor who intercepts the transmitted signal and performs a reply attack. In this paper, we propose a transfer learning-based model to identify the replay attacks launched against remote keyless controlled vehicles. Specifically, the system makes use of a pre-trained ResNet50 deep neural network to predict the wireless remote signals used to lock or unlock doors of a remote-controlled vehicle system remotely. The signals are finally classified into three classes: real signal, fake signal high gain, and fake signal low gain. We have trained our model with 100 epochs (3800 iterations) on a KeFRA 2022 dataset, a modern dataset. The model has recorded a final validation accuracy of 99.71% and a final validation loss of 0.29% at a low inferencing time of 50 ms for the model-based SGD solver. The experimental evaluation revealed the supremacy of the proposed model.

Posttraumatic stress disorder (PTSD) and/or specific PTSD symptoms may evoke disordered eating and unhealthy lifestyles, resulting in adverse cardiometabolic events (e.g., hypertension and obesity) in certain groups, which may implicate the treatment of this complex condition. The diagnostic criteria of PTSD have lately expanded beyond the three common symptoms (intrusion, avoidance, and hyperarousal). Simultaneously, four-, five-, and six-dimensional structures of the Impact of Event Scale-Revised (IES-R), a popular PTSD measure, seem to be more robust than the original three-dimension structure. Within the context of COVID-19, this instrumental study used a convenience sample of 58 dental healthcare workers (HCWs) from Russia (mean age = 44.1±12.2 years, 82.8% females) to examine the criterion and predictive validity of two IES-R structures: the IES-R3 and the IES-R6 (with the added symptoms of numbing, sleep disturbance, and irritability). The subscales of the two IES-R structures expressed good internal consistency, strong correlations with the PTSD Symptom Scale (PSS), hypertension diagnosis, and high body mass index (BMI). In receiver-operating characteristic (ROC) curve analysis, all IES-R models perfectly predicted the PSS (all area under the curve (AUC) >0.9, p values <0.001). The IES-R, both hyperarousal subscales, and the IES-R3 intrusion subscale significantly predicted high BMI. Both avoidance subscales and the IES-R3 intrusion subscale, not the IES-R, significantly predicted hypertension. In conclusion, both IES-R structures can reliably measure PTSD symptoms. The IES-R, hyperarousal, and intrusion may be credible criterion variables for predicting high BMI within PTSD while the intrusion and avoidance subscales may reflect the cardiovascular consequences associated with PTSD more reliably than the IES-R itself. The IES-R subscales may predict cardiometabolic adversities in PTSD, signifying a need for proper assessment of lifestyle and the application of dietary and exercise interventions in order to lower physical morbidity in PTSD. Replicating the study in larger samples, which comprise different physical and mental conditions from heterogenous cultural contexts is pivotal to validate the results (e.g., in specific groups such as those with confirmed traumatic exposure and comorbid mood dysfunction).

Balancing the efficiency and robustness of food systems is a well-known trade-off process. Over-optimization of efficiency may lead to excessive use of resources. On the other hand, under-optimization of efficiency may lead to excessive waste of resources. Using non-parametric methods can help in developing actionable frameworks through which decision-makers and stakeholders can effectively balance and improve food systems' efficiency and robustness. Under this context, this paper presents a new structured approach integrating two well-suited non-parametric methods for analyzing and balancing the interconnection between the efficiency and robustness of food systems. This approach consists of three main steps. First, the slacks-based data envelopment analysis (SBM-DEA) is utilized to analyze the efficiency of five food robustness dimensions. Second, the weighted efficiency of these dimensions is computed and analyzed to provide an insight into their influence on the food system efficiency. Finally, two search methods were developed to identify opportunities for improving efficiency and robustness. The outcomes of these methods have been analyzed and validated to ensure their effectiveness and viability. The operational and mathematical properties of the proposed approach were evaluated using data from thirty-seven food-producing countries. The weights of the robustness dimensions in this study were determined using the analytic hierarchy process (AHP) method. The input matrix of the AHP was constructed using expert judgment and consultations with stakeholders. The results of this study have shown an appropriate level of applicability and effectiveness of the proposed approach. While the first search method provided valuable insights, the second method proved to be more effective in identifying the sources of inefficacy of robustness dimensions. Several conclusions have been drawn and reported with some recommendations for future research works.

The purpose of this study was to examine the problem of violent extremism among young people. Additionally, a youth violent extremism scale (YVES) was developed that takes into account the differences between and within Arab cultures. The goal was to produce a scale that could be used and tested within an Arab country or between Arab countries. The scale was developed in three stages: generation, refinement, and validation. A literature review and nomological network were utilized to show the scale's dimensions, correlations to those dimensions, and other relevant variables (such as the LSC, LSE, and criminality scale). A sample of 6726 young students from fifteen Arab countries and the authorities involved were selected. Findings showed that six factors were obtained through principal component factor analysis using Varimax and Kaiser normalization (29 items). A significant positive association was found (r=.651, p = 0.000), supporting the scale's validity. Using Cronbach's alpha, the scale reliability was strong and assessed at 0.98. The scale's construct validity was estimated by assessing the correlation between the Youth Violent Extremism scale and low self-control. A significant positive correlation (r=.651, p = 0.000) indicates the scale's validity. Findings showed significant differences between males and females in youth violent extremism (F = 13.678, α ≤0.000). Descriptive results showed, however, that females have a slightly higher mean of violent extremism than males (M =85.2 vs. 87.6), with a close variation (26 vs. 27) for males and females, respectively. In this study, a measurement tool was provided that can be used as a knowledge base for security strategies. The scale can be applied to identify legal, social, and educational policies and applications of violent extremism. Future research is needed to test the scale on different professions like teachers, police officers, and parents. Also, a need to test the scale on different age groups, settings, and cultures. A need for atheoretical and empirical framework for understanding and preventing youth violent extremism through promoting a more cohesive and resilient youth society.

The prim objective of commenced article is to determine q-sumudu transforms of a product of unified family of q-polynomials with basic (or q-) analogue of fox’s H-function and q-analog of I-functions. Specialized cases of the leading outcome are further evaluated as q-sumudu transform of general class of q-polynomials and q-sumudu transforms of the basic analogues of Fox’s H-function and I-functions.

A hallmark of Alzheimer’s disease (AD) are the proteinaceous aggregates formed by the amyloid-beta peptide (Aβ) that is deposited inside the brain as amyloid plaques. The accumulation of aggregated Aβ may initiate or enhance pathologic processes in AD. According to the amyloid hypothesis any agent that has the capability to inhibit Aβ aggregation and/or destroy amyloid plaques represents a potential disease modifying drug. In 2023, a humanized IgG1 monoclonal antibody (lecanemab) against the Aβ soluble protofibrils was approved by US FDA for AD therapy thus providing compelling support to the amyloid hypothesis. To acquire a deeper insight on the in vivo Aβ aggregation, various animal models, including aged herbivores and carnivores, non-human primates, transgenic rodents, fish and worms are widely exploited. This review is based on the recent data obtained using transgenic animal AD models and presents experimental verification of the critical role in Aβ aggregation seeding of the interactions between zinc ions, Aβ with the isomerized Asp7 (isoD7- Aβ) and the α4β2 nicotinic acetylcholine receptor.

Smart livestock farming leverages technology to boost production and meet food demand sustainably. This study delves into smart technologies in animal production, covering opportunities, challenges, and solutions. Smart agriculture employs modern technology to enhance efficiency, sustainability, and animal welfare in livestock farming. It includes remote monitoring, GPS-based animal care, robotic milking, smart health collars, predictive disease control, and other innovations to achieve these goals. While smart animal production holds great promise, it does face challenges related to cost, data management, and connectivity. To address these challenges, potential solutions include remote sensing, technology integration, and farmer education. Smart agriculture offers opportunities for increased efficiency, improved animal welfare, and enhanced environmental conservation. A well-planned approach is crucial to maximize the benefits of smart livestock production while ensuring its long-term sustainability. This study confirms the growing adoption of smart agriculture in livestock production, with the potential to support sustainable development goals and deliver benefits such as increased productivity and resource efficiency. To fully realize these benefits and ensure the sustainability of livestock farming, it is essential to address cost and education challenges. Therefore, this study recommends promoting a positive outlook among livestock stakeholders and embracing smart agriculture to enhance farm performance.

Hollow and concrete-filled steel tubes (CFSTs) are widely used as columns in many structural systems and local buckling can occur when they are subjected to axial compression loading. The critical regions for the local buckling of the columns are near the ends of the column where the moments are the highest. To strengthen the critical regions of the CFSTs the CFRP provides a simple and effective method which used previously as an enhancement for both of strength and ductility. So, this study suggests investigating the axial load behaviour of CFST strengthened with CFRP using FE method after a verification study and then a various parametric studies were carried out to cover the effect of the CFRP layers, number, confinement length and position. The FE results proved that, one CFRP sheet with thickness equal to 1.2 mm was strengthened the composite column by 8.5%, two CFRP sheets with total thickness equal to 2.4 mm was strengthened the composite column by 23.5%, three CFRP sheets with total thickness equal to 3.6 mm was strengthened the composite column by 35.1% and four CFRP sheets with total thickness equal to 4.8 mm was strengthened the composite column by 44.5%. Moreover, this study proved that by strengthened the composite columns with CFRP sheets with different lengths, the axial load resistance was improved by 8.5%, 4.6%, 0.1% and 0.0% for length percentages 100%, 75%, 50% and 25% respectively.

This study investigated the chemical composition, and total phenolic content(TPC), total flavonoid content (TFC), and antioxidant activity Reziz date pomace extracted using different solvent system. The recovery, bioaccessibility, and stability of bioactive compounds were evaluated using In vitro gastrointestinal digestion. The results showed that pomace rich source of fiber but low in fat, and protein. Extraction data revealed that methanol, and ethanol were the most effective solvent for TPC and TFC extraction with higher antioxidant activity. In vitro gastrointestinal digestibility significantly affected recovery, bio-accessibility and stability of bioactive compounds. The TPC, TFC, and antioxidant activities were significantly increased after the mouth digestion but decreased during the gastric and intestinal digestion. The bioaccessibility of polyphenol and flavonoid were 35.22% and 23.57% respectively after the intestinal digestion. The chyme insoluble fraction (pellet) showed higher bioactive compounds and antioxidant activity compared to the chyme soluble fraction. The high fiber content of the date pomace seemed to affect the bioaccessibility of the bioactive compounds. TPC or TFC and the antioxidant activity determined by DPPH and ABTS were found to have a positive correlation with the oral, gastric, and intestinal digestion. The GC-MS analysis of digested date pomace in mouth, gastric, or intestinal digestion revealed an increase in the number of peaks (compounds) compared to the undigested sample. According to these findings, Ruzeiz date pomace could be utilized as a bioactive ingredient source in formulation of functional foods to promote healthy life.

Synthetic materials such as Carbon, Kevlar, and Glass fibers are extensively utilized in various industries due to their superior characteristics including high stiffness, great strength, low den-sity, and high wear resistance, these advantages contributed to making them widespread in ap-plications like; aerospace, automobile, civil and electronics. This research is carried out to enhance the creep compliance of epoxy composite material by considering two types of fibers as reinforcement. A composite material is produced by combining two fibers, Kevlar fiber mixed with sika epoxy resin, along with Carbon fiber also mixed with sika epoxy resin using a Hand-Layup process. Experiments and numerical modeling are examined to offer a comprehensive understanding creep behavior of epoxy composite material in different weight ratios. Burger and Prony models are used to represent stress relaxation and creep strain of Visco-elastic material. According to the results, sika epoxy resin reinforced with Kevlar and Carbon fibers exhibits enhancement in the mechanical properties compared with pure epoxy. The use of Kev-lar/Sika epoxy composite results in higher creep compliance and modulus of elasticity compared with Carbon/Sika epoxy composite.

This study finds that in northern Jordan, breeder indicators present challenges to the sustainability and growth of sheep and goat farming, while economic indicators suggest a combination of financial stability alongside hurdles related to profitability and resource ownership. Breeder age plays a role in the management of livestock herds, due to factors such as experience, resources, or adherence to traditional practices. Experience significantly affects breeders' decisions on male insemination replacements, likely due to skill. Crop cultivation influences breeders' returns by reducing feeding costs, while strategic lamb sales management boosts individual animal profitability. Winter raises animal mortality due to cold stress. Other animals in herds increase kid mortality by spreading diseases. Breeder experience significantly affects lamb survival, stressing its role in care. Increasing sheep proportion enhances lamb production and reduces lamb mortality while managing rams and selling lambs positively affects herd health and productivity. A larger goat herd proportion positively correlates with kids sold but inversely with breeding males and overall kids, implying trade-offs affecting herd productivity and mortality rates. Sheep herds (92.5%) show slightly better reproductive success than goats (90.6%), implying superior long-term viability. Flock excels in birth, survival, and sales, but low sheep and lamb%. Improvement is needed for sustainability, and the potential is high. Goat breeding shines in birth, sales, and overall success, but needs attention to kid survival and other sustainability issues. In conclusion, despite challenges, there are promising opportunities to enhance sheep and goat farming in Jordan. Effective management, informed by breeders' experience and economics, is crucial. Empowering small-scale herders and implementing targeted interventions like winter mortality solutions and selective breeding is vital for sustainable growth.

There are overwhelming empirical evidences highlighting the contribution of indiscriminate antibiotic usage (ABU) in food animals to the overall burden of antibiotic resistance (ABR) in humans, thus making antibiotic use the main selective pressure driving antibiotic resistance. Social and behavioral perspective on antibiotic use and resistance in poultry is limited. Our study therefore aimed at obtaining information on antibiotic usage, awareness of ABR, and the attitude and perceptions towards prudent antibiotic usage and ABR. A cross-sectional survey using a structured questionnaire was conducted in 125 poultry farms in Kwara state in December 2019. Most farmers (69.6%, n=87/125) were aware of ABR and had satisfactory knowledge about ABR with a mean knowledge score of 3.16±1.47. The age, gender, level of education of farmers, and their flock size were significantly associated with a satisfactory knowledge of ABR (p<0.05). Tertiary education was significantly associated with ABR awareness (OR: 4.7; 95% CI: 0.0690, 0.654; p=0.007) and the ABR knowledge level (OR: 7.8269; 95% CI: 3.2693, 18.7381; p < 0.01). Higher flock size was significantly associated with a satisfactory knowledge of ABR (OR: 9.4551; 95%CI: 3.7928, 23.5707; p<0.01). Most of the poultry farmers (68%) had positive attitudes towards prudent antibiotic use with a mean score of 2.75±0.89. On the contrary, only 32.8% of poultry farmers had a good perception of ABR with a mean perception score of 4.95±1.12. The ABR knowledge level was significantly associated with the perceptions of farmers (p<0.05) but not their attitudes toward ABU and ABR (P=0.083). There was evidence of unprescribed use of antibiotics in poultry and a failure to observe antibiotic withdrawal periods. These constitute a risk of exposure to unacceptable levels of drug residues from poultry products and an increased risk of ABR. Improving education and communication on antibiotic stewardship programs are crucial to prevent the looming antibiotic apocalypse.

(1) Background: Most patients with atrial fibrillation, on warfarin therapy, are at higher risk of morbidity and mortality. However, data targeting patients with atrial fibrillation, who take warfarin therapy, are limited in Jordan. This study aimed to provide in-depth analysis of a cohort of patients with atrial fibrillation on warfarin regarding patients’ characteristics, atrial fibrillation related symptoms, interventions, comorbidities, and 12-months outcomes. (2) Methods: The study enrolled 645 patients with atrial fibrillation, on warfarin, from 28 health settings across Jordan. Standardized clinical data form was utilized to collect data upon enrollment, at one, six, and 12 months post initial assessment. Descriptive statistics were used for the description of variables. (3) Results: The most commonly reported symptoms were palpitation (41.4%) shortness of breath (39.1%) and fatigue (26.2%). The prevalent comorbidities associated with atrial fibrillation were congestive heart failure (22.5%), valvular heart diseases (16.6%), and cerebral vascular accident (16.3%). The embolic (32.4%) and thrombotic cerebral vascular accident (16.2%) were the most common type. Major bleeding associated with hospitalization was the most frequent type of bleeding (10 out of 24). (4) Conclusions: Jordanians, using anticoagulation, need to be constantly monitored in terms of their characteristics, symptoms, and any potential complications, to ensure its optimal therapeutic dose and prevent any potential health complications.

The emergence of novel coronavirus (SARS-CoV-2) in marked as the highest pathogenic coronavirus that has crossed from the hosts to the human population in the twenty-first century. The spreading of COVID-19 in different chinese cities and around the world is travel-related viral spread with the unprecedented nosocomial outbreaks. It has also shown with high case-fatality rates, indeed to urgent prophylactic and therapeutic settings. Scientific advancements of the SARS-CoV-2 pandemic allowed for rapid progress to understand the epidemiology and pathogenesis of SARS-CoV-2. This review highlights the the genomic structure of SARS-CoV-2 with the proposed roles of genotype and phenotype of SARS-CoV-2 in pathogenesis and discuss recent results supporting treatment strategies of COVID-19 with a special focus on how these new insights may facilitate rational development of SARS-CoV-2 for targeted therapies in the future.

Multiple sclerosis (MS) is a chronic autoimmune disease that affects the central nervous system (CNS) characterized by varying degrees of demyelination of uncertain etiology, and is associated with specific environmental and genetic factors. Upon recognition of CNS antigens, the immune cells initiate an inflammatory process which leads to destruction and deterioration of the neurons. Innate immune cells such as macrophages, dendritic cells and natural killer cells are known to play critical roles in the pathogenesis of MS. Also, the activation of peripheral CD4+ T cells by CNS antigens leads to their extravasation into the CNS causing damages that exacerbates the disease. This could be accompanied by dysregulation of T regulatory cells and other cell types functions. Experimental autoimmune encephalomyelitis (EAE) is a mouse model used to study the pathophysiology of MS disease. In this review, we highlight the roles of innate and adaptive immune players in the pathogenesis of MS and EAE.

: Clay covers a substantial portion of the Earth. Such soil covers Iraq’s central and southern regions, where the depth of the clay may reach 150 m. All enhancement techniques and methods for transporting large loads cease to function or become prohibitively expensive in such soils. In this case, thermal treatment is the most effective method. In this study, a novel heating system was created and produced utilizing gas as the heat source via boreholes that simulate reality. The borehole heating cases were planted inside soft clay soil to enhance the soil. Different parameters were investigated, including the spacing between boreholes (3, 4, and 5 times the outer diameter of the borehole), the heating depth (1, 1.5, 2, and 2.5 times the width of the model footing), the duration of heating (2, 4, 6, 8, and 10 hrs), and the pattern (square, circular, triangular). The results showed the strength and behavior of the soil treated with heated boreholes at varying spacings, depths, patterns, and heating periods. The best results were found for a spacing, depth, and heating time of three times the outer diameter of the borehole, two times the width of the footing model, and eight hours, respectively. The effect of the heated borehole casing pattern was small when the heated borehole casing was used. The experiments conducted on heated soil showed that the undrained shear strength (Cu) increased from 14 to 360 kPa and then dropped to 140 kPa (as an average with depth). In contrast, the average angle of internal friction (Ø) rose from 0 to 52 degrees and decreased to 16 degrees (as an average with depth) from the center of the heating model to the furthest point affected by heating. In addition, the EDS pattern showed that components like silicon, aluminum, and iron dropped at 300 °C and rose at 400 °C in the treated soils. At 200 °C, the calcium content rose, and then dropped dramatically at 400 °C. The carbon percentage increased at 300 °C and decreased at 400 °C. The elements’ proportions showed little change or remained stable at temperatures between 400 °C and 600 °C.

Background: Alkylresorcinols (ARs) are polyphenolic compounds with a wide spectrum of biological activities and potentially implicated in the regulation of host metabolism. The present study is aimed to establish whether ARs can be produced by human gut microbiota and to evaluate alterations in the content of ARs in stool samples of C57BL and db/db and LDLR (-/-) mice in dependence on diet specifications and olivetol (5-n-pentylresorcinol) supplementation in order to estimate a regulatory potential of ARs. Methods: The quantita-tive analysis of ARs levels in mice stool samples was performed using gas chromatography with mass spectrometric detection; fecal microbiota transplantation (FMT) from human donor to germ-free mice was performed to explore whether the intestinal microbiota could produce ARs molecules. Results: A significant increase in the amounts of individual mem-bers of ARs homologues in stool samples was revealed in 14 days after FMT. 5-n-Pentylresorcinol supplementation to a regular-chow diet influences the amounts of sev-eral ARs in stool of C57BL/6 and LDLR (-/-), but not db/db mice. Conclusions: For the first time, we have shown that several ARs can be produced by the intestinal microbiota. Taking into account, that AR concentrations in human serum are correlated with LPS levels and with microbiota diversity indexes in human stool samples, it can be assumed that ARs may serve as quorum-sensing molecules, influencing gut microbiota composition and host me-tabolism as well.

Agriculture technical development exclusively relies on the effective delivery of agrochemicals and water to the plants and reduce the harmful effects of the agrochemicals on the useful organisms in the soil. Wherefore, super absorbent hydrogels were prepared by copolymerization of gum Arabic (GA) with chitosan (CS) or poly(vinyl alcohol) (PVA), and cross-linked by N,’N-methylenebisacrylamide (MBA) chemically (CH) or using sodium hexametaphosphate (SHMP) as physical (PH) cross-linker. The prepared hydrogels include PVA/GA-CH, PVA/GA-PH, CS/GA-CH and CS/GA-PH showed different degree of swelling (DS) in the following swelling medium, deionized water (DW), river water(RW) and buffer solution pH9. PVA/GA-CH and CS/GA-CH hydrogels have showed 84g/g and 63g/g maximum DS in RW respectively, while PVA/GA-PH and CS/GA-PH hydrogels have showed 81g/g and 69g/g maximum DS in pH9 respectively. The water- retention capability of some hydrogels were studied using a mixture of 0.5%(w/w) hydrogel in agricultural soil and the composite showed about 20 days extra retain of water with a control sample of soil alone. The hydrogels were loaded using urea the important fertilizer in agriculture field. The hydrogels of higher DS were only loaded, where PVA/GA-CH hydrogel has shown 89%(w/w) maximum loading percentage (Lmax%), and CS/GA-PH hydrogel reached 79.75%(w/w) of urea. The release behavior in different medium and degree of temperatures of loaded hydrogels were studied. Generally, PVA/GA-CH hydrogel have shown better release profile in RW medium at 10oC, while CS/GA-PH hydrogel showed more controlled release in pH9 medium at 30oC. Different analytical methods of SEM, FTIR of loaded hydrogel and after their release were achieved, whereas XRD,1H NMR and (TGA, DSC) of prepared hydrogels have been characterized.

Extensive genome structure variation, such as copy number variations (CNVs) and presence/absence variations, is the basis for the remarkable maize genetic diversity; however, the effect of CNVs on maize herbivory defense remains largely underexplored. Here, we report that the naturally occurring duplication of the maize 9-lipoxygenase gene, ZmLOX5, leads to increased resistance of maize to herbivory by fall armyworms (FAW). Previously, we showed that ZmLOX5-derived oxylipins are required for defense against chewing insect herbivores and identified several inbred lines, including Yu796, that contained duplicated CNVs of ZmLOX5, referred to as Yu796-2×LOX5. To test whether introgression of the Yu796-2×LOX5 locus into the herbivore-susceptible B73 background that contains a single ZmLOX5 gene is a feasible approach to increase resistance, we generated a series of near-isogenic lines that contained either 2, 1 or 0 copies of the Yu796-2×LOX5 locus in the B73 background by six back crosses (BC6). Droplet digital PCR (ddPCR) confirmed the successful introgression of the Yu796-2×LOX5 locus in B73. The resulting B73-2×LOX5 inbred line displayed increased resistance against FAW associated with increased expression of ZmLOX5, increased wound-induced production of its primary oxylipin product, the α-ketol, 9-hydroxy-10-oxo-12(Z),15(Z)-octadecadienoic acid (9,10-KODA), and the downstream defense hormones regulated by this molecule, 12-oxo-phytodienoic acid (12-OPDA) and abscisic acid (ABA). Surprisingly, wound-induced JA-Ile production was not increased in B73-2×LOX5, resulting from the increased JA catabolism. Furthermore, B73-2×LOX5 displayed enhanced drought tolerance likely due to increased ABA and 12-OPDA content. Taken together, this study revealed that the duplicated CNV of ZmLOX5 quantitively contributes to maize antiherbivore defense and presents proof-of-concept evidence that the introgression of naturally occurring duplicated CNVs of a defensive gene into the productive, but susceptible, crop varieties is a feasible breeding approach for enhancing plant resistance to herbivory and tolerance to abiotic stress.

Soil and Water Assessment Tool (SWAT) was used to simulate five glacierized river basins that are global in coverage and vary in climate. The river basins included the Narayani (Nepal), Vakhsh (Central Asia), Rhone (Switzerland), Mendoza (Central Andes, Argentina), and Central Dry Andes (Chile) with a total area of 85,000 km2. A modified SWAT snow algorithm was applied in order to consider spatial variation of associated snow melt /accumulation by elevation band across each subbasin. In the previous studies, melt rates varied as a function of elevation resulting from an air temperature gradient while the snow parameters were constant throughout the entire basin. A major improvement of the new snow algorithm is separating the glaciers from seasonal snow based on their characteristics. Two SWAT snow algorithms were evaluated in simulation of monthly runoff from glaciered watershed: 1) the snow parameters are lumped (i.e. constant throughout the entire basin) and 2) the snow parameters are spatially variable based on elevation band-subbasin (i.e. modified snow algorithm). Applying the distributed SWAT snow algorithm improved the model performance in simulation of monthly runoff with snow-glacial regime, so that mean RSR decreased to 0.49 from 0.55 and NSE increased to 0.75 from 0.69. Improvement of model performance was negligible in simulation of monthly runoff from the basins with monsoon runoff regime.

Air pollution is one of the biggest problems of this age, not only it contributes to climate change but also it has a negative effect on public and individual health due to rising morbidity and mortality. There are various contaminants that play a significant role in human disease. Numerous toxins are released into the environment as a result of anthropogenic activities including burning fossil fuels for transportation and electricity generation. In order to assist decision-makers in finding a long-term solution for improving environmental quality and population health status, NO2 pollution monitoring and regulation is an essential task. Based on data acquired from Sentinel-5P, the study presented a comparison of NO2 measurements in Sentinel-5P and ground-based stations over the urban area of Fujairah during 2021 and comparison analysis of the tropospheric NO2 column spatial configuration over urban area of Fujairah during comparable periods of pre, mid and post Covid-19 pandemic era as 2019, 2020 and 2021, respectively. These findings demonstrate remarkable tropospheric NO2 column number density decreases even of 85% in the busier areas of emirate of Fujairah during the pandemic era. Sentinel-5P measurements draw attention to the significant reduction in NO2 pollution over Fujairah during the COVID-19 lockdown where we had less traffic, which is supported by ground stations-based calculations.

Soil-borne Trichoderma spp. have been extensively studied for their biocontrol activities against pathogens and growth promotion ability with plants. However, the beneficial effect of Trichoderma on inducing resistance against insect herbivores has been considered only recently. Among diverse Trichoderma species, consistent with previous reports, we showed that root colonization by T. virens triggered induced systemic resistance (ISR) to leaf-infecting fungal pathogens. Whether T. virens induces ISR to insect pests has not been tested before. In this study, we investigated whether T. virens affects jasmonic acid (JA) biosynthesis and defense against fall armyworm (FAW) and western corn rootworm (WCR). Unexpectedly, the results showed that T. virens colonization of maize seedlings grown in autoclaved soil suppressed wound-induced production of JA, resulting in reduced resistance to FAW. Similarly, the bacterial endophyte Pseudomonas chlororaphis 30-84 suppressed systemic resistance to FAW due to reduced JA. Further comparative analyses of the systemic effects of these endophytes when applied into sterile or non-sterile field soil showed that both T. virens and P. chlororaphis 30-84 triggered ISR against hemibiotrophic fungal pathogen Colletotrichum graminicola in both soil conditions, but only suppressed resistance to FAW in sterile soil. In contrast to the effect on FAW defense, T. virens colonization of maize roots suppressed WCR larvae survival and weight gain. This is the first report suggesting the potential role of T. virens as a biocontrol agent against WCR.

Nowadays, the Internet of Things (IoT) devices and applications have rapidly expanded worldwide due to their benefits in improving the business environment, industrial environment, and people's daily lives. However, the IoT devices are not immune to malicious network traffic, which causes potential negative consequences and sabotages IoT operating devices. Therefore, developing a method for screening network traffic is necessary to detect and classify malicious activity to mitigate its negative impacts. Therefore, this research proposes a predictive machine learning model to detect and classify network activity in an IoT system. Specifically, our model distinguishes between normal and anomaly network activity. Furthermore, it classifies network traffic into five categories, normal, Mirai attack, denial of service (DoS) attack, Scan attack, and man-in-the-middle (MITM) attack. Five supervised learning models were implemented to characterize their performance in detecting and classifying network activities for IoT systems. This includes models shallow neural networks (SNN), decision trees (DT), bagging trees (BT), support vector machine (SVM), and k-nearest neighbor (kNN). The learning models were evaluated on a new and broad dataset for IoT attacks, the IoTID20 dataset. Besides, a deep feature engineering process was applied to the dataset to improve the accuracy of the learning models. Our experimental evaluation exhibited an accuracy of 100% recorded for the detection using all implemented models and an accuracy of 99.4%-99.9% recorded for the classification process.

We report the synthesis and characterization of Poly Methyl-Meth-Acrylate (PMMA)/Poly vinylalcohol (PVA) polymeric blend doped with different concentrations of Copper oxide (CuO) nanoparticles (NPs). The (PMMA-PVA)/CuO nanocomposite hybrid thin films (wt. % = 0%, 2%, 4%, 8%, and 16%) of CuO NPs are deposited on glass substrates via dip-coating technique. The transmittance (T%), reflectance (R%), the absorption coefficient (α), the optical constants [refractive index (n), extinction coefficient (k)], optical dielectric functions [ɛ',ɛ''] are investigated and interpreted. Tauc, Urbach, Spitzer-Fan, and Drude models are employed to calculate the optical bandgap energy (Eg) and the optoelectronic parameters of the nanocomposite thin films. The refractive index and optical bandgap energy of of (PMMA-PVA) polymeric thin film are found to be (1.5 to 1.85) and 4.101 eV, respectively. Incorporation of specific concentrations of CuO-NPs in (PMMA-PVA) polymeric thin films leads to a noticeable decrease in the optical bandgap energy and to an increase of the refractive index. Moreover, Fourier Transform Infrared Spectroscopy (FTIR) transmittance spectra are measured and analyzed for undoped and doped polymeric thin films to pinpoint the major vibrational modes in the spectral range (500 and 4000 cm-1), as well as, the nature of network bonding in both systems. Thermal stability of thin films is investigated by performing thermogravimetric analysis (TGA). The TGA thermograms confirm that both doped polymeric thin films are thermally stable at temperatures below 110°C which enables them to be attractive for a wide range of optical and optoelectronic applications. Our results indicate that optical, vibrational and thermal properties of both polymeric thin films can be tuned for specific applications by the appropriate corporation of particular concentrations of CuO-NPs.

Abstract: An efficient and environmentally Pumice as a new catalyst for designing of 3,4- dihydropyrimidin-2(1H) ones / thiones via one-pot multi component condensation of aromatic aldehydes, urea/ thiourea and ethyl acetoacetate or acetyl acetone in excellent yields (96-99 %). The advantages using of this new catalyst is very cheap, available, non-toxic, stable under thermal conditions, easy work-up, improved yields, the product of reaction is very pure without using chromatographic methods and solvent free conditions.

The considerable biological and medicinal activities of pyridazines has stimulated considerable research on efficient syntheses of these derivatives. In the last decade, microwave irradiation has generally been used for the energy source. As demonstrated in recent studies, pressure reactor “Q-tubes” may be used to accelerate several of these reactions in a more optimal and safer manner (compared to microwaves). In these studies there has been postulated a pathway for the formation of pyridazino[5,4,3-de][1,6]naphthyridine derivatives . In this paper we consider this pathway, and an alternate pathway, for several reactions. Contrary to the suggestion in these studies the pathway in which initial dimerization of malononitrile was postulated could be excluded based on chemical evidence. The reactions performed were the reaction of arylhydrazonals 1a,b with benzylidinemalononitrile which afforded in Q-tube the 3-acyl-4-aryl-1-phenyl-6-amino-1,4-dihydropyridazines, and the reaction of arylhydrazonals 1a,b, malononitrile 9 and aromatic aldehydes 10a-g in Q-tubes which afforded the tricyclic systems 12a-n whose structure could be established by X-ray crystal structure determination. In conclusion, we have added to the work of the recent studies by excluding a reaction pathway for one of their reaction products.

Antibiotics are the most magnificent discovery of 20th century that have saved millions of lives from infectious diseases. Microbes have developed acquired antimicrobial resistance (AMR) to many drugs due to high selection pressure from increasing use and misuse of antibiotics over the years. The transmission and acquisition of AMR occur primarily via human–human interface both within and outside of the healthcare facilities. A huge number of interdependent factors related to healthcare and agriculture govern the development of AMR through various drug resistance mechanisms. The emergence and spread of AMR from the unrestricted use of antimicrobials in livestock feed has been a major contributing factor. The prevalence of AMR bacteria has attained its incongruous level worldwide and threatening global public health as silent pandemic, necessitating urgent intervention. Therapeutic options of AMR bacterial infections are limited resulting in significant morbidity and mortality with high financial impact. The paucity in discovery and supply of new novel antimicrobials to treat life-threatening AMR infections stands in sharp contrast to demand. Immediate interventions to contain AMR include surveillance and monitoring, minimizing over the counter antibiotics and antibiotics in food animals, access to quality and affordable medicines, vaccines and diagnostics, and enforcement of legislation. An orchestral collaborative action within and between multiple national and international organizations are required urgently, otherwise, a post-antibiotic era can be a real possibility than an apocalyptic fantasy for the 21st century. This narrative review highlights on the basis, mechanisms and factors in microbial resistance and key strategies to combat antimicrobial resistance.

We present a very computationally light and fast approximation algorithm and then verify it with genetic algorithm and simulated annealing. We show that our algorithm is on par with GA and SA in terms of output produced while having a tightly bounded time complexity. Our algorithm works best when there is a strong positive correlation between the reliability of a component and its cost. We present two algorithms with the same essence. One of them is system cost bounded and the other is target reliability bounded. Our proposed algorithm works on a subsystem level redundancy instead of component level redundancy.

Objectives: Isolated mild neutropenia is a common clinical problem. The current study aims to validate our previous findings regarding the high prevalence of isolated neutropenia in Southern and Southwestern Saudi Arabia and explore the effect of altitude or regional differences. Methods: In this retrospective cross-sectional study, laboratory results of a commercial laboratory were screened over a period of 5 years (2016–2020) in seven different cities in South and southwestern Saudi Arabia. Participants’ laboratory investigations were reviewed and excluded for any ab-normal complete blood count, renal profile, liver profile, lipid profile, thyroid function test, fasting blood glucose, or HbA1c findings. Descriptive analysis and 95th percentile range were calculated using standard statistical methods. Results: A total of 91,880 complete blood count results were included in the final analysis. isolated neutropenia is common laboratory finding, with a prevalence ranging from 11-23%. The 2.5th percentile of the neutrophil count was lower than 1.5×109/L in all seven cities. Conclusions: Mild to moderate neutropenia is common in Southern and Southwestern Saudi Arabia. Benign ethnic neutropenia (BEN) may explain this high prevalence. Since BEN has no clinical significance, the reference range for normal neutrophil counts needs to be adjusted to reflect the effect of BEN.

Preventive Maintenance (PM) is a periodic maintenance strategy, which has great results for devices in extending their life, increasing productivity, and most importantly, help avoid unexpected breakdowns and their costly consequence. A preventive maintenance scheduling (PMS) is determining the time for carrying out PM, and it represents a sensitive issue in terms of impact on production if the time for the PM process is not optimally distributed. In this study, hybrid heuristic methods were used to solve the PMS problem, as genetic algorithm and Tabu research were adopted. The optimal solution was reached in a short time compared to previous studies in which optimal methods were used, integer programming and nonlinear integer programming. Also, sensitivity analysis was applied to measure the robustness and strength of the method used, where an optimal solution was obtained for all experiments and in record time. This method can be used for power plants in privet or public sectors, to generate an optimal PMS, to save money, and to avoid water or electricity cuts.

This article purposed to examine the impact of integration between Lean accounting (LA) tools & Just in Time (JIT) technique on Cost Reduction (CR) in modern manufacturing environment in Saudi establishments, these two variable moderated by Ethical Standards (ESs). A quantitative methodology was used for realizing the study objectives and answering study questions, the main tool exercised for producing the incipient data was a fully-structured questionnaire with closed ended questions, which was designed and passed around online among a selected sample of (109) managers and accountants in Saudi manufacturing firms. Descriptive and deductive statistics adopted to derive the findings, wherefore the compiled responses analyzed by SPSS & AMOS and the results showed that there is direct and indirect effect of LA tools & JIT technique on CR in Saudi industrial companies, especially when using ESs. These findings could provide decision makers in Saudi manufacturing companies with the acuity of adopting both methods in a combined way to maximize the profits of these firms. The results of this study also suggest that the application of LA tools & JIT technique has a positive effect on the promotion of sustainable manufacture and consequent achievement of high sustainable performance.

Antimicrobial resistance (AMR) poses a global public health threat, with rates directly linked with consumption. The World Health Organization (WHO) AWaRе-classification aims to guide antibiotic use, which is influenced by drug availability, affordability, and economic policies. In Jordan, a high proportion of consumed antibiotics belong to the 'Watch' category. Data from the WHO-AWaRе classification, the Essential Medicines List, and the Jordan Food and Drug Administration were analyzed. Antibiotics for adults were classified and their cost per Defined Daily Dose (DDD) was determined, then affordability was assessed. In 2023, 43 injectable and 43 oral antibiotics for adults were registered in Jordan. 'Watch' antibiotics were the most common. 'Access' antibiotics had the lowest cost/DDD. 'Rеsеrvе' antibiotics were the most expensive with few generics. Injectable antibiotics had a negative correlation between cost and the number of alternatives. Affordability was higher for oral antibiotics compared to injectable ones. 'Rеsеrvе' antibiotics were generally unaffordable. This study highlights the need to promote 'Access' antibiotics over other categories by encouraging registration of missing ‘Access’ antibiotics and adjusting 'Watch' and 'Rеsеrvе' antibiotic prices. Competition among generics can lead to lower prices, increasing affordability and accessibility. We emphasize the importance of the AWaRе-classification in guiding antibiotic use in Jordan.

Electrospun ultrathin fibers based on binary compositions of polylactide (PLA) and poly(ε-caprolactone) (PCL) with different ratios of polymer components from 0/100 to 100/0 wt. % were studied. Using a combination of thermal (DSC) and relaxation (EPR) measurements, the effect of biopolymers content on the characteristics of the crystal structure of PLA and PCL and the diffusive rotational mobility of the stable TEMPO radical in the amorphous regions of PLA/PCL compositions was shown. It was revealed that after PLA and PCL blending, significant changes in the degree of crystallinity of PLA, PCL segmental mobility, sorption capacity of the radical as well as activation energy of rotational diffusion in the amorphous regions of PLA/PCL composition are observed. The characteristic region of biopolymers’ composition from 50/50 to 30/70 % PLA/PCL blends ratio was found, where the inversion transition of PLA from dispersive medium to dispersive phase where an inversion transition is assumed when the continuous medium of the PLA transforms into a discrete phase. The performed studies made it possible for the first time to carry out a comprehensive analysis of the effect of the system component ratio on the structural and dynamic characteristics of the PLA/PCL film material at the molecular level.

Dubermatinib (DMB, TP-0903), a benzenesulfonamide, is an inhibitor of the tyrosine kinase AXL, which is a member of the TAM family, and can prevent GAS6-mediated activation of AXL in cancer cells. Patients with previously treated chronic lymphocytic leukemia are being studied in phase I/II clinical trials to determine its antineoplastic potential (CLL). In the current work, the reactive intermediates of DMB were studied using liquid chromatography-mass spectrometry (LC-MS). Human liver microsomes (HLMs) were exposed to dimethylbenzene in a laboratory setting, and the resulting metabolites were collected through protein precipitation. Intense reactivity toward nucleophilic macromolecules was seen in the metabolites of the piperazine and pyrimidine rings in DMB, iminium and 2,5-quinone-imine, respectively. To assess the toxicities of the possibly reactive metabolites, DMB was incubated with HLMs in the presence of 1.0 mM KCN and 1.0 mM glutathione. The DMB metabolites found by LC-MS/MS were seven in vitro phase I metabolites, three cyano adducts, and two GSH conjugates. Phase I in vitro metabolic reactions included N-demethylation, hydroxylation, and dechlorination. The in vitro metabolism of DMB and the metabolites it produces have not been studied before.

The ability of S. aureus to infect humans and cause a wide range of infections so efficiently is a consequence of the many variant virulence factors that it can produce. Superantigens (SAgs) make up a group of them and include staphylococcal enterotoxins (SE). The main objective of this study was to detect enterotoxin gene cluster (EGC) in S. aureus isolates that caused infections in Paraguayan children in the year 2017, through an observational and cross-sectional study. The detection of the EGC including the seg, sei, sem, sen, seo, and seu genes, was carried out by end-point PCR. 181 S. aureus isolates were collected, most of them caused skin and soft tissue infections (SSTI, n=140, 77%) and came from children under 6 years 50% (n=90). At least one SE gene was detected in 96% (174/181) of isolates and 24% (44/181) carried the entire EGC. An association between methicillin resistance and seg, sei, seo, and seu gene carriage (p ≤0.05) was observed. A high prevalence of EGC was detected in S. aureus isolates collected from infected children attending the main health care centers in Paraguay, its importance is due to the potential of these toxins to aggravate staphylococcal infections.

Hyperlipidemia case was described as a rise of lipid profile or lipoproteins in the blood. This study describe briefly investigate the reducing hyperlipideamia impact of Ginkgo biloba on the level of lipid profile.

This study investigates how students' well-being relates to sustainable development and education for sustainability at Prince Mohammad Bin Fahd University, Saudi Arabia. The authors endeavor to answer the question "How Does Students' Well-Being Relate to Sustainable Development Via Education for Sustainable Development?" and four sub-questions. Primary data were collected by semi-structured interviews exploring the viewpoints of twenty female and male students (n=26) aged between 18 and 26. The content analysis results have identified additional well-being and education for sustainability factors that influence sustainable education and, therefore, sustainable development. These antecedents include workload, transparency, grading criteria, fairness, belonging, work-life balance, mental health support, missing emotional intelligence factors, factors related to Education for Sustainable Development, such as instructors' role models, institutional commitment, leadership, and collaboration with government. In addition, the study developed a theoretical model for the relationship between antecedents for Education for Sustainable Development, Education for Sustainable Development, and Sustainable Development in the Saudi context. Finally, the study answers four research questions: What factors contribute to education for sustainable development? What are the antecedents of education for sustainable development? How do university educators contribute to sustainable education? How do the antecedents of education for sustainable development, education for sustainable development, and sustainable development relate?

: Plant-derived terpenes have aroused considerable interest as chemotherapeutic agents for a variety of diseases. This study aimed at the isolation and purification of the scarce terpenes psiadin, plectranthone and saudinolide from their respective plants, followed by the determination of antiproliferative activity, against hepatic cancer cell lines (HepG2, Hep3B), and the potential molecular mechanisms. Time- and dose-dependent cytotoxicity, evaluated using MTT and colony-forming assays, were exhibited by psiadin and plectranthone against the cancer cells. Flow cytometry showed that these two terpenes blocked cell cycle progression and induced mitochondrial-mediated apoptosis, particularly through increased cytochrome c and disruption of mitochondrial membrane potential. Additionally, they initiated the generation of reactive oxygen species as well as inhibiting NF-B. Psiadin lowered several essential cyclins and cyclin-dependent kinases and reduced RB activation. It was concluded that psiadin, in particular, has a significant therapeutic potential with the biggest advantage of differentiating between cancer and normal cells which is acutely lacking in current cytotoxic drugs. Its precise mode of action needs further investigation but appears predominantly to cause cell cycle arrest by interfering with cyclin production. It will be important to determine, in future studies, whether these terpenes will similarly inhibit other cancer cell lines and retain its activity against tumors in vivo.

Aims: Angiotensin-converting enzyme 2 (ACE2) plays an important role in the entry of coronaviruses into host cells. This paper described how carnosine, a naturally occurring supplement, can be an effective drug candidate for coronavirus disease (COVID-19) on the basis of molecular docking and modeling to host ACE2 co-crystallized with COVID-19 spike protein. Methods: First, the starting point was ACE2 inhibitors and their structure-activity relationship (SAR). Next, chemical similarity (or diversity) and PubMed searches made it possible to repurpose and assess approved or experimental drugs for COVID-19. In parallel, at all stages, authors performed bioactivity scoring to assess potential repurposed inhibitors at ACE2. Finally, investigators performed molecular docking and modeling of the identified drug candidate to host ACE2 co-crystallized with COVID-19 spike protein. Results: Carnosine emerged as the best known drug candidate to match ACE2 inhibitor structure. Preliminary docking was more optimal to ACE2 than the known typical angiotensin-converting enzyme 1 (ACE1) inhibitor (enalapril) and quite comparable to known or presumed ACE2 inhibitors. Viral spike protein elements binding to ACE2 were retained in the best carnosine pose in SwissDock at 1.75 Angstroms. Out of the three main areas of attachment expected to the co-crystallized protein structure, carnosine bind with higher affinity to two compared to the known ACE2 active site. LibDock score was 92.40 for site 3, 90.88 for site 1, and inside the active site 85.49. Conclusion: Carnosine has promising inhibitory interactions with host ACE2 co-crystallized with COVID-19 spike protein and hence could offer potential mitigating effect against current COVID-19 pandemic.

The aims of this study are to measure the technical efficiency (TE) of Cambodian household’s rice production and trying to determine its main influencing factors using the stochastic frontier production function. The study utilized primary data collected from 301 rice farmers in three selected districts of Battambang by structured questionnaires. The empirical results indicated the level of household rice output varied according to differences in the efficiency of production processes. The mean TE is 0.34 which means that famers produce 34% of rice at best practice at the current level of production inputs and technology, indicates that rice output has the potential of being increased further by 66% at the same level of inputs if farmers had been technically efficient. Furthermore, between 2013-2015 TE of household’s rice production recorded -14.3% decline rate due to highly affected of drought during dry season of 2015. Moreover, evidence reveals that land, fertilizer, and pesticide are the major influencing input factors of household’s rice production, while disaster, education of household head, family size and other crops’ cultivated area are core influencing factors decreasing TE. Conversely, the main influencing factors increasing TE are irrigated area, number of plot area and sex of household head.

The aims of this study are to measure the technical efficiency (TE) of Cambodian household’s rice production and trying to determine its main influencing factors using the stochastic frontier production function. The study utilized primary data collected from 301 rice farmers in three selected districts of Battambang by structured questionnaires. The empirical results indicated the level of household rice output varied according to differences in the efficiency of the production processes. The mean TE is 0.34 which means that famers produce 34% of rice at best practice at the current level of production inputs and technology, indicates that rice output has the potential of being increased further by 66% at the same level of inputs if farmers had been technically efficient. Furthermore, between 2013-2015, TE of household’s rice production recorded -14.3% decline rate due to highly affected of drought during dry season of 2015. Moreover, evidence reveals that land, fertilizer, and pesticide are the major influencing input factors of household’s rice production, while disaster, education of household head, family size and other crops’ cultivated area are core influencing factors decreasing TE. Conversely, the main influencing factors increasing TE are irrigated area, number of plot area and sex of household head.

The present study aims to measure the technical efficiency and establish core factors effecting rice production in Cambodia. Four-years dataset generated from the central government document “Profile on Economics and Social” of entire 25 provinces between 2012-2015 and the stochastic production frontier model (SFA) was applied. The results indicated that the level of output (quantity) of Cambodian rice production varied according to the different level of capital investment in agricultural machineries, total rice actual harvested area, and technically fertilizers application within provinces. Furthermore, evidence revealed the overall mean efficiency of rice production is 78.4% implies that there is still room to further improve technical efficiency by given the same level of inputs and technology. More importantly, the findings revealed that irrigation, production technique and amount of agricultural supporting staffs are being as the most important influencing factors of rice production’s technical efficiency in Cambodia. In conclusion, present study strongly recommends the development of irrigation systems and good water management practices to be considered and bring into more effective actions by the central government as well as related agencies for improving rice production in Cambodia in addition to capital investment and improving technical skills of supporting staffs and rural farmers.

Cotton is the most ubiquitous and profitable fiber with diverse industrial and domestic applications. Grown in over 100 countries, it has a global market value of about $40 billion and employs over 350 million people from fields to textile mills, contributing about 7% of total labor-force recruitment in developing economies. Cotton has an indeterminate growth habit and an extensive tap root system affected by soil physicochemical and environmental conditions. There is a consensus among experts that conventional cotton cultivation still has a long way to attain sustainability, which is essential if cotton will maintain its competitive edge over other natural and synthetic fibers like hemp, polyesters, and rayon. Despite several efforts already committed to growing cotton sustainably, sustainability has eluded cotton cultivation globally because of the intense farm inputs (freshwater, pesticides, and heavy-duty equipment) needs, especially in developing economies. Some of the technological advancements towards achieving the goal of sustainable cotton cultivation include the development of new varieties, improved irrigation and mulching and precision agriculture techniques, application of remote sensing and Unmanned Aerial Systems (UAS) combined with image processing, and the introduction of autonomous and multi-purpose robotic platforms for growing and harvesting cotton. This review attempts to evaluate the successes already achieved by stakeholders in moving cotton towards sustainable production and identify areas where efforts are still needed to reach sustainable production and improved profitability goals for cotton with projections for future research directions.

Brushless Synchronous Machines (BSM) are replacing conventional synchronous machines with static excitation in generation facilities due to the absence of sparking and lower maintenance. However, this excitation system makes challenging measuring electric parameters in the rotor. This fact highly difficult the detection of ground faults, which are the most common type of electrical fault in electric machines. In this paper, a ground fault detection method for BSM is proposed. It is based on an inductive AC/DC rotating current sensor installed in the shaft. In case of a ground fault in the rotating parts of the BSM, a fault current will flow through the rotor’s sensor, inducing voltage in its stator. Analyzing the frequency components of the induced voltage the detection of a ground fault in the rotating elements is possible. The ground faults detection method proposed covers the whole rotor and discern between DC and AC sides. To corroborate the detection method, experimental tests have been performed using a prototype of this sensor connected to laboratory synchronous machines achieving satisfactory results.

This paper introduces the complex Rayleigh-van der Pol-Duffing oscillators (RVDOs), which are hyperchaotic and can be either autonomous or non-autonomous. The fundamental dynamics of the autonomous and nonautonomous complex RVDOs including dissipation, symmetry, fixed points and their stability are studied. These oscillators are found in various important fields of physics and engineering. The paper proposes a scheme to achieve phase synchronization (PS) and antiphase synchronization (APS) for different dimensional models. These kinds of synchronization are considered as generalization of several other types of synchronization. For this scheme we use the active control method based on Lyapunov stability theory. By analytically determining the control functions, the scheme achieved PS and APS. Our scheme is applied to study PS of hyperchaotic behaviours for two distinct hyperchaotic non-autonomous and autonomous complex RVDOs. Additionally, the scheme is employed to achieve APS of chaotic real non-autonomous RVDO and hyperchaotic complex autonomous RVDO, including those with different dimensions. Our work presents numerical results that plot the amplitudes and phases of these hyperchaotic behaviours, demonstrating the successful achievement of PS and APS.

Pituitary adenylate cyclase-activating polypeptide (PACAP) and vasoactive intestinal peptide (VIP) are two structurally-related immunosuppressive peptides. However, the underlying mechanisms through which these peptides regulate microglial activity are not fully understood. Using lipopolysaccharide (LPS) to induce an inflammatory challenge, we tested whether PACAP or VIP differentially affected microglial activation, morphology and cell migration. We found that both peptides attenuated LPS-induced expression of the microglial activation markers Iba1 and iNOS (###p<0.001), as well as the pro-inflammatory mediators IL-1β, IL-6, Itgam and CD68 (###p<0.001). In contrast, treatment with PACAP or VIP exerted distinct effects on microglial morphology and migration. PACAP reversed LPS-induced soma enlargement and increased the percentage of small-sized, rounded cells (54.09% vs 12.05% in LPS-treated cells), whereas VIP promoted a phenotypic shift towards cell subpopulations with mid-sized, spindle-shaped soma (48.41% vs 31.36% in LPS-treated). Additionally, PACAP was more efficient than VIP in restoring LPS-induced impairment of cell migration and the expression of urokinase plasminogen activator (uPA) in BV2 cells compared with VIP. These results suggest that whilst both PACAP and VIP exert similar immunosuppressive effects in activated BV2 microglia, each peptide triggers distinctive shifts towards phenotypes of differing morphologies and with differing migration capacities.

There are few published studies assessing dental students' and faculty's perception regarding environmental sustainability in dentistry (ESD), its existence within the dental curricula, along with barriers and enablers for its integration. As far as the authors know, no published study looked into this in Saudi Arabia, and this is what the current study aims to explore. A cross-sectional survey using validated online questionnaires for dental students and faculty was carried out in 26 dental schools in Saudi Arabia. The validated questionnaire utilized 25 questions using Qualtrics (XM) software. Both descriptive statistics and thematic analysis were included in the data analysis. ESD content is not formally embedded within the dental curricula in all 26 included universities in Saudi Arabia. Although the majority of students and faculty members agreed or strongly agreed on the importance of ESD as a whole and the importance of teaching it, more than 82% and 81% of students and faculty, respectively, demonstrated a lack of basic knowledge concerning ESD. There is a high demand for incorporating ESD content in dental education in Saudi Arabia. To achieve this, resources and policy changes are necessary. A top-down approach is needed, including incorporating ESD into dental education standards, using evidence-based practices in revising infection control regulations and providing institutional support through training, materials, and incentives. National dental associations and governments should provide practical solutions and actively support dental professionals in implementing ESD.

Precise monitoring of individual crop growth and health status is crucial for precision agriculture practices. However, traditional manual inspection methods are time-consuming, labor-intensive, and often lack the spatial resolution required for detailed analysis. This research addresses the need for efficient and high-resolution crop monitoring by leveraging Unmanned Aerial Vehicle (UAV) imagery and advanced computational techniques. The primary objective was to develop a methodology for precise identification, extraction, and monitoring of individual corn crops throughout their growth cycle. This was achieved by integrating UAV-derived data with image processing, computational geometry, and machine learning techniques. UAV imagery was ac-quired bi-weekly at altitudes of 40m and 70m, capturing the entire growth cycle of a corn crop from planting to harvest. A time-series Canopy Height Model (CHM) was generated by analyzing the differences between the Digital Terrain Model (DTM) and the Digital Surface Model (DSM) derived from the UAV data. Local spatial analysis and image processing techniques were em-ployed to determine the local maximum height of each crop. Subsequently, a Voronoi data model was developed to delineate individual crop canopies, successfully identifying 13,000 out of 13,050 corn crops in the study area. For enhanced accuracy in canopy size delineation, vegetation indices were incorporated into the Voronoi model segmentation, refining the initial canopy area esti-mates by eliminating interference from soil and shadows. The proposed methodology enables precise estimation and monitoring of crop canopy size, height, biomass reduction, lodging, and stunted growth over time, providing valuable insights for precision agriculture practices. This work contributes to the scientific community by demonstrating the potential of integrating UAV technology, computational geometry, and machine learning for accurate and efficient crop mon-itoring at the individual plant level.

By shifting eating hours from daytime to nighttime, Ramadan intermittent fasting (RIF) illustrates how religious beliefs influence human dietary behavior and subsequent anthropometric and metabolic measures. This study aimed to investigate socioeconomic characteristics and examine how observing RIF affects dietary intake, anthropometric indices, and metabolic markers in healthy premenopausal (PRE-M) and post-menopausal (POST-M) Saudi women. Before starting the study, the authors hypothesized that the RIF improves some nutritional aspects and health in respondents, but not after breaking the fast.. The study includes 62 women (31 PRE-M, 21-43 years, and 31 POST-M, 44-68 years). A structured questionnaire was used to collect socioeconomic data. Physical activity, anthropometric, dietary, and biochemical assessments were undertaken before RIF and at the end of the third week of Ramadan fasting month. Socioeconomic data varied among respondents. Observing RIF was associated with significantly (at either p ≤ 0.01 or p ≤ 0.05) lower intake of calories, macronutrients, minerals (except for Na), and vitamins than before RIF for both groups. In terms of body mass index (BMI), and waist-to-height ratio (WHtR) for PRE-M, the percentage of overweight decreased significantly (p≤0.01) while obesity remained unchanged. In contrast, for POST-M, the percentage of overweight increased significantly (p≤0.05), but obesity decreased after RIF. Both groups' waist-to-hip ratio (WHR), body fat (BF), and fat mass (FM) decreased after RIF. High-density lipoprotein cholesterol (HDL-C), fasting blood glucose (FBG), triglycerides (TG), and blood pressure (SBP, DBP) were generally maintained at acceptable normal levels in most responders before and after RIF. However, low-density lipoprotein cholesterol (LDL-C) was significantly decreased during RIF than before, especially for POST-M. Age, occupation, and monthly income were the most important factors influencing women’s nutritional status and body fat. In conclusion, observing RIF by PRE- and POST-M Saudi women was associated with significant improvements in variable health indicators, with a few exceptions, particularly POST-M, and may help lower risk factors for chronic diseases.

Multiple sources influence air quality and regional climate in complicated atmospheric emission situations like urban agglomerations. To resolve pollution plumes and source influences in polluted areas, a comprehensive chemical fingerprinting of sources utilizing non-methane hydrocarbons (NMHCs) and the identification of acceptable tracer molecules and emission ratios is required, in contrast to pristine locations, where reliance on a single or a few chemical tracers is frequently sufficient. We have characterized the prevalence of NMHCs fingerprints in the urban areas and quantified the correlation of windspeed with the concentration of these pollutants. eNose sensors and Air quality management stations provide the data to identify the emission sources of such pollutants. Based on our analysis, the average NMHC concentration in 2021 has been recorded 0.424 ppm at point 1 AQMS whereas at point 2 AQMS it was 0.256 ppm. Such outcomes could be attributed to the proximity of emissions sources, the direction and speed of the wind, or both. Moreover, traffic can be a major contributor to pollution levels in any urban area. More research based on a larger dataset is required before definitive conclusions can be drawn, and viable solutions can be proposed.

In this study, we address the formidable challenge of solving large-scale Max-Cut problems (MCP). We introduce a rapid computational procedure utilizing a hybrid 1-flip/r-flip local search heuristic. This innovative strategy significantly reduces the computational time required for MCP problems while consistently generating solutions of exceptional quality. The paper presents substantial computational insights, showcasing the effectiveness of our approach on very-large-scale Max-Cut instances with varying densities. Our proposed heuristic is rigorously evaluated by comparing its performance against a quantum annealing solver, leveraging a multi-start Tabu Search framework. The results underscore the potency of this unique combination as an efficient and effective solution for large-scale QUBO problems. Notably, our hybrid heuristic consistently delivers high-quality solutions within the stringent CPU time limits of 600 seconds, demonstrating its efficacy across Max-Cut instances ranging from 10,000 to 40,000 variables. This research contributes to advancing the state-of-the-art in large-scale QUBO problem-solving, offering a powerful and time-efficient approach with broad applicability.

Objective: This paper aims to build an Effort Estimation Model for design, coding and testing Web Applications Based Fuzzy and Practical Models, which will help in optimizing the efforts in software development. Methods/Analysis: Soft computing approach is adopted and applied in the effort estimation and then compared with practical efforts in the development process with interpreting the historical data available for the existing functionalities. Findings: The effort estimation model presented in this paper focuses on the first level estimates published by Project Managers and the second level estimates presented by Project Leaders or Developers for any new requirement or enhancement for a web application built on 3-tier architecture using Microsoft technologies. The model considers the classification of each task as either Low or Medium or High complexity. These tasks pertain to the lowest level parts in bottom-up estimation. Efforts are estimated for designing, coding and unit testing of these tasks and the efforts are summed up to get the effort estimation for the higher level which is a feature to be implemented. Novelty/Improvement: The paper also discusses about the application of the effort estimation model by taking a new requirement as a case study. The first level estimates calculated using the effort estimation model has a variance of about 25% when compared with the actual effort. This variance is very much acceptable considering the fact that the first level estimates can be tolerable up to 35%. The proposed effort estimation tool would help the project managers to efficiently control the project, manage the resources effectively, and improve the software development process and also trade off analyses among schedule, performance, quality and functionality. Fuzzy logic is used to verify the claims made in efforts estimation. It is proposed a new relation between the number of data and efforts value membership for actual data. And converts it into crisp value in the range [0…1] which helps to classify the complexity of the task and subtask in the design, coding and testing phases.

This study aimed to screen the antibacterial activity of essential oils from different parts (leave and stem) of Salvia officinalis against some Gram positive and Gram negative bacteria using agar disc diffusion test, then the extracts were prepared by hydro distillation to extract the essential oils. Maceration and hexane extraction by Soxhlet were used to obtain crude extracts from the leave and stem. Essential oils from the leaves and the ethyl acetate extract of the leaves showed higher antimicrobial activity, while hexane extract of leaves and stems showed moderate antibacterial activity. In contrast the essential oil from the stems showed very low antibacterial activity. It was observed that the results gram positive bacteria (staphylococcus aureus) was more sensitive than Gram negative (Echerichia coli).

It is well known that fiber sizing is one of the most important component in the manufacturing of composites, and it does affect the mechanical properties including strength and stiffness. In this work, the influence of fiber sizing levels on the mechanical properties of carbon fibers (CF) is reported at room temperature by using single fiber tensile testing (Favimat+), single fiber pullout testing (SFPO), and interfacial elemental analysis using X-ray photoelectron spectroscopy (XPS). Standard modulus of CF (7±0.2 μm in diameter) were sized using two Michelman commercially available sizing formulations. The average solid content for each sizing formulation is 26.3 ± 0.2% and 34.1 ± 0.2%, respectively. HEXION RIMR 135 with curing agent RIMH 137 was used as a model thermoset epoxy matrix during the SFPO measurements. A predictive engineering fiber sizing methodology is also developed. Sizing amounts of 0.5, 1, and 2 wt. % on the surface of the fiber is achieved for both sizing formulations. For each fiber sizing level, 50 single fiber tensile testing experiments and 20 single fiber pull-out tests were conducted. The ultimate tensile strength (σult) of the carbon fibers and the interfacial shear strength (τ_app) of the single fiber composite were analyzed. it is also investigated the effect of the sizing levels on the interfacial shear stress and the O/C (Oxygen/Carbon) surface composition ratio. As a result, generalized fiber sizing and characterization methods were established. The developed methods can be used to characterize the strength and interfacial shear strength of any man-made fibers with different sizing formulations and solid contents, irrespective of the matrix i.e. thermoset or thermoplastic.

IoT system becomes hot topic nowadays for smart home, IoT helps devices to communicate together without human intervention inside home, so it is offering many challenges. A new smart home IoT platform powered using electromagnetic energy harvesting is proposed in this paper. It contains a high gain transmitted antenna array and efficient circular polarized array rectenna system to harvest enough power from any direction to increase life time of the batteries used in IoT system. Optimized energy consumption, the software with adopting the Zigbee protocol of the sensor node and low power microcontroller are used to operate in lower power modes. The proposed system has an 84.6 days lifetime which is approximately 10 times the lifetime for similar system. On the other hand, the proposed power management circuit operated at 0.3 V DC to boost the voltage to ~3.7V from radio frequency energy harvesting and manage battery level to increase the batteries lifetime. A predictive indoor environment monitoring system is designed based on a novel hybrid system to provide a non-static plan, approve energy consumption and avoiding failure of sensor nodes in smart home.

This study delves into the dynamics of 'Variations' and 'Claims' within construction projects, specifically under the FIDIC-Red Book 1999 (FIDIC 1999) framework. It aims to identify, categorize, and devise mitigation strategies for key types of Variations and Claims, aligning with the FIDIC Conditions of Contract. The research, drawing on inputs from construction industry professionals including Contract Administrators and Project Managers, focuses on the MENA re-gion. This choice is driven by the region's extensive adoption of FIDIC standards and its rapidly growing construction sector. Data collection encompassed a questionnaire distributed to 80 industry experts, predominantly through interviews, focusing on countries like Saudi Arabia, UAE, Kuwait, and Egypt. These locations were chosen to reflect diverse construction practices and the involvement of international firms. Utilizing SPSS-V.25 for statistical analysis, the study uncovers the most prevalent and impactful causes of Variations and Claims, highlighting the critical need for managerial intervention. A key feature of this study is the integration of Scientometric Analysis for a quantitative review of current literature, providing a comprehensive academic context. A significant addition to the methodology is the implementation of a k-means clustering analysis. This advanced statistical technique further classifies the data into distinct clusters, each representing unique combinations of 'Frequency' and 'Impact' of Variations and Claims. The k-means analysis elucidates intricate patterns and potential solutions, offering profound insights into effectively managing these issues. These analytical advancements are crucial in identifying significant and manageable responses to reduce the frequency and impact of Variations and Claims in construction projects.

.Various synthetic nematicides are currently used effectively in the control of plant parasitic nematodes. However, these nematicides have adverse effects on humans and the environment. Neem oil is eco-friendly alternatives to synthetic nematicides. The effectiveness of repeated neem oil application in suppressing the root-knot nematodes infestation in figs seedlings was therefore examined in this study, both in its natural form (10 ml/L) and in its nano-emulsion form (5 and 7 ml/L). The recorded reduction parameters of M. incognita were J2/250g soil, galls and egg masses / 5g roots of infected fig seedlings were measured at that time, and the effects of these natural additives were compared with the Fosthiazate (Krenkel 75%EC). The impact of such soil amendments on some typical plant parameters, the total microbial count of soil, and the overall enzymatic activity of the fig rhizosphere were also included. Obtained results revealed that the soil population density of root knot nematode suppressed by 80.3% , reduction of nematode egg masses (60.4%) due to the application of nano-emulsion of neem oil (at 7ml/L). Present work recommend the use of nano-emulsion of neem oil as one of the effective and eco-friendly means to reduce the root- knot nematode on fig .

Wheat is widely grown in the Mediterranean region, where plants frequently face water shortages. Recently, more attention to rationalizing irrigation water has been increased due to the adoption of sustainable agricultural systems. Therefore, two field trials were conducted at the Agriculture Research Station of Nubaria, Egypt, in two consecutive seasons (2017/2018 and 2018/2019) to examine three irrigation regimes' effects, i.e., 60, 80, and 100% of crop evapotranspiration (ETc) combined with foliar ascorbic acid (AsA) or vitamin B2 (VB2) on yield and water productivity of wheat in two separate experiments. A split-plot design was used with three replicates. Irrigation treatments occupied the main plots, while the subplot in the first experiment was placed by ascorbic acid (AsA) and vitamin B2 in the second experiment. Results indicated that 100% ETc produced higher wheat yield and its attributes and insignificantly surpassed 80% ETc. Compared to the unsprayed plots, the foliar application of 6 mM ascorbic acid or 2.0 mM vitamin B2 significantly increased grain yield, components, and water use efficiency. The interaction between irrigation regimes (100% ETc or 80% ETc) and foliar application of 6.0 mM ascorbic acid or 2.0 mM vitamin B2 resulted in the highest values with no significant difference. Foliar application of ascorbic acid or vitamin B2 saved 20% of irrigation water while yielding a reduction that did not exceed 10%. The biplot graph of treatments x traits (TT) was a useful statistical tool for examining the impact of treatments on yield and its characteristics and identifying the links between these factors. Results suggest that riboflavin or ascorbic acid may have a potential role as an effective antioxidant for enhancing the tolerance for drought stress in wheat.

Citation: To be added by editorial staff during production.

Purpose: This study aimed to describe the molecular epidemiology and seasonality of human rhinovirus (HRV) in chronic obstructive pulmonary disease (COPD) and its association with COPD exacerbations in Abu Dhabi, the United Arab Emirates (UAE). Methods: Sputum specimens were collected for analysis from all COPD patients who visited a medical center from November 2021 to October 2022. The real-time quantitative polymerase chain reaction (qPCR) test was used to detect HRV. Results: Of the 78 COPD patients included in the study, 58 (74%) pa-tients presented with one or more exacerbation episodes. The incidence of COPD exacerbation peaked over the winter and substantially decreased during the summer. HRV positivity in pa-tients during exacerbation (E1) was 11/58 (19%) and 15/58 (26%) two weeks after the exacerbation episode (E2). There was no significant difference in the HRV load in these patients. No statistically significant difference was observed in the detection of HRV during exacerbation compared to patients with stable COPD. Conclusion: This is the first study to assess the association between HRV detection by qPCR and COPD exacerbations in the UAE. The high sensitivity of the detec-tion technology helped collect reliable epidemiologic data. Few studies have provided similar Middle East data. This study's pattern of COPD exacerbations and HRV detection parallels that of temperate countries. This information can help with future, more extensive surveillance of res-piratory viruses in the UAE and the Middle East and their association with COPD exacerbations.

“De-[Constructing] Growth” is offered as a deeper and more useful conceptualization that avoids the negative connotations of, and resistance to, “degrowth” by decoupling profit from unsustainable consumption, production, and inequality.

Background: Migraine is one of the most common health conditions in the reproductive male and female population. Premenstrual syndrome (PMS) is a common condition that affects many women during their menstrual cycle. around 50 to 60% have menstrual headaches among the migraineur women. The symptoms in the majority were mild, but 5–8% may suffer moderate to severe symptoms, accompanied by considerable distress or functional dysfunction. Premenstrual migraine (PMM) refers to migraines that occur with the menstrual cycle. It affects approximately 50% of women with migraine and can be debilitating in terms of both frequency and severity of symptoms. This information is important for medical professionals in Saudi Arabia to be aware of so, as to provide better medical care and support which can significantly improve the person's quality of life of women who suffer from PMS and menstrual migraines. Objectives: To estimate the prevalence of menstrual migraines in women, to evaluate the severity and frequency of menstrual migraines in women with PMS, and to identify potential risk factors aggravating menstrual migraines in women with PMS. Methodology: A cross-sectional community-based study was conducted on reproductive age (18-50Years) women who have regular menstrual cycles with experience migraine headaches and are diagnosed with PMS and menstrual migraine, using a self-administered questionnaire between December 2022 to May 2023 in Saudi Arabia. Results: Out of 2130 women participants 397 were suffering from migraine which is 18.6%. Of the total 397(18.6%) Migraineurs individuals 230 (57.9%) were suffering from menstrual migraine and 167 (42.1%) were non-menstrual migraineurs, in general, reproductive women menstrual migraine is 10.7% and non-menstrual migraine is 7.8%. The BMI is increasing the incidence of menstrual migraines is increasing. Migraine Disability Around one-third of the participants were suffering from III–moderate disability 134 (33.8) Most of the menstrual migraine victims at least 3 days in the last three months were absent from their duties due to their menstrual migraines. Conclusions: Migraine attacks during the menstrual cycle cause the impairment of their social and physical ability to perform their routine household, and academic activities and unable to fulfill their professional commitments. To better understand the Menstrual Migraine and Non-menstrual migraine large prospective studies are required to plan the best management methods.

We use a recently proposed formulation of quantum mechanics based, not on potential functions but rather, on orthogonal energy polynomials. In this context, the most important building block of a quantum mechanical system, which is the wavefunction at a given energy, is expressed as pointwise convergent series of square integrable functions in configuration space. The expansion coefficients of the series are orthogonal polynomials in the energy; they contain all physical information about the system. No reference is made at all to the usual potential function. We consider, in this new formulation, few representative problems at the level of undergraduate students who took at least two courses in quantum mechanics and are familiar with the basics of orthogonal polynomials. The objective is to demonstrate the viability of this formulation of quantum mechanics and its power in generating rich energy spectra illustrating the physical significance of these energy polynomials in the description of a quantum system. To assist students, partial solutions are given in an appendix as tables and figures.

Nowadays, technological advancement has transformed traditional vehicles into Au-tonomous Vehicles (A.V.s). In addition, in our daily lives, A.V.s play an important role since they are considered an essential component of smart cities. A.V. is an intelligent vehicle capable of main-taining safe driving by avoiding crashes caused by drivers. Unlike traditional vehicles, which are fully controlled and operated by humans, A.V.s collect information about the outside environment using sensors to ensure safe navigation. Furthermore, A.V.s reduce environmental impact because they usually use electricity to operate instead of fossil fuel, thus decreasing the greenhouse gasses. However, A.V.s could be threatened by cyberattacks, posing risks to human life. For example, re-searchers reported that Wi-Fi technology could be vulnerable to cyberattacks through Tesla and BMW AVs. Therefore, more research is needed to detect cyberattacks targeting the components of A.V.s to mitigate their negative consequences. This research will contribute to the security of A.V.s by detecting cyberattacks at the early stages. First, we inject False Data Injection (FDI) attacks into an A.V. simulation-based system developed by MathWorks. Inc. Second, we collect the dataset generated from the simulation model after integrating the cyberattack. Third, we implement an intelligent symmetrical anomaly detection method to identify FDI attacks targeting the control system of the A.V. through a compromised sensor. We use long short-term memory (LSTM) deep networks to detect FDI attacks in the early stage to ensure the stability of the operation of A.V.s. Our method classifies the collected dataset into two classifications: normal and anomaly data. The ex-perimental result shows that our proposed model's accuracy is 99.95%. To this end, the proposed model outperforms other state-of-the-art models in the same study area.

Smart electronic devices and telemedicine are widely used in humans' daily lives. This provides remote treatment of patients using information and communications technology. New telemedicine technologies, such as the Internet of Medical Things (IoMT), make it easier for medical and computing devices to communicate regularly and effectively. Critical motivations for adapting the IoMT are reduced cost, increased quality of life, and timely medical intervention. IoMT is significant because it enables continuous, real-time patient monitoring during routine everyday activities using a variety of wearables and sensors. With big data, the IoMT technology makes excellent use of Artificial Intelligence (AI) to support disease detection and health condition prediction, alerting patients and healthcare providers. Many research studies have been conducted to explore various aspects of IoMT and its applications in the real world. However, it is challenging to comprehend all the techniques and solutions proposed by the research community. Therefore, this survey sheds light on some crucial aspects of IoMT technologies and explores the potential research gaps and directions the research community could tackle. The survey examines and discusses the characteristics of IoMT standards, protocols, and types. It then delves into the layers of IoMT and distinguishes them into Fog and edge. The studies published under each type were explored, and the limitations of these works were highlighted. The research gaps and directions on IoMT approaches and technologies were also highlighted. With such findings and research directions, further research endeavors could be carried out to address the issues and existing limitations in the IoMT.

Mastitis-causing bacteria can establish persistent infections in the mammary gland of commercially important dairy animals despite the presence of strong specific humoral and cellular immune mechanisms. The aim of this study was to encapsulate vitamin D3 by complex coacervation with sulfur-saturated bovine lactoferrin-alginate using microbial transglutaminase-catalyzed crosslinking and investigate the oral administration of encapsulated vitamin D3 in blood serum biomarkers of the immune response in late-lactating dairy goats. Dairy goats (n = 18) in late lactation were randomly assigned to three experimental groups (n = 6), after balancing weight. Dairy goats were orally administered with 0.35 mg vitamin D3/day in the unencapsulated form and 0.35 mg vitamin D3/day in the encapsulated powder form. Another group received the basal diet. The experimental period lasted 6 weeks. The blood serum concentrations of 25-hydroxyvitamin D3 [25-(OH)-D3], lactoferrin, immunoglobulin A (IgA), and interferon-gamma (INF-γ) were measured. The delivery of vitamin D3 to dairy goats resulted in a marked increase of 25-(OH)-D3 concentration in serum while the serum level of lactoferrin also increased. Alternatively, the serum levels of IgA and the immunomodulatory cytokine INF-γ were elevated following supplementation with the encapsulated vitamin D3. Overall, the capsules in the powder form used in this study kept vitamin D3 highly bioavailable.

Background: Although the link between environmental lead exposure and several patterns of cardiovascular disease (CVD) has been reported, its association with silent myocardial infarc-tion (SMI) has not been explored. We aimed to assess the association between blood lead levels (BLL) and risk of SMI. Methods: This analysis included 7283 (mean age 56.1±2.52 years, 52.5% women) participants from the Third National Health and Nutrition Examination Survey who were free of clinical CVD. Ascertainment of BLL done using graphite furnace atomic absorption spectrophotometry. SMI defined as ECG evidence of MI without history of MI. Multivariable lo-gistic regression analysis was used to examine the association between SMI and BLL. Results: SMI was detected in 120 participants corresponding to an unweighted prevalence of 1.65%. Par-ticipants with higher levels of BLL had higher prevalence of SMI (0.4%, 0.9%, and 2.4% across BLL tertiles; p-value