The migration paths and distribution driving factors of heavy metals in dry and windy area polluted by their production in the North China need a further research. To address this research gap, we collected 675 soil samples, 72 atmospheric deposition samples and 20 water samples around a production area and measured its heavy metal concentrations. Results showed that the Cu, Zn, As and Pb in 0-10 cm soil layer showed a fan-shaped distribution, which was consistent with their atmospheric deposition fluxes. It indicated the distribution patterns of these heavy metals were driven by strong winds in studied area. Although Cr concentrated to the production area in the 0-10 cm soil layer, principal component analysis showed that this migration was through wind as well. The concentration of Cd in the river increased from 0.257 mg/L to 0.460 mg/L along water flowing, and caused the same distribution trend in soil near the river from upstream to downstream. Unlike the above, surface runoff should drive the Cd migration. The concentration of Pb in the river was over threshold of pollution, and also led to an accumulation in the 5-10 cm soil layer. It suggested that the migration of Pb was through both wind and surface runoff. Six studied heavy metals showed different migration behaviors, and specific control strategies for individual heavy metal should be concerned.

Balancing the levels of ammonia, in poultry facilities plays a role in enhancing the welfare and productivity of animals. Various environmental factors such as temperature, humidity, ammonia concentrations, carbon dioxide concentration and exposure to light have an impact on the wellbeing and efficiency of poultry. It is essential to monitor these elements to achieve outcomes necessitating practical, reliable and cost-effective solutions. Leveraging the Internet of Things (IoT) in conjunction with LoRa-WAN (Long Range Wide Area Network) technology presents an opportunity in the industry by enhancing connectivity among devices and facilitating real time data transmission. This research introduces a hardware and software setup for monitoring conditions at poultry farms through LoRa WAN and IoT technologies. More-over researchers employed Random Forest Machine Learning prediction models to tune the concentration of Ammonia (NH3) in poultry facilities across a wide area or multiple Poultry houses. Comparative assessments were conducted to evaluate the proposed system against devices revealing a correlation exceeding 0.9830 between the sensors and standard equipment while costing 28% less than traditional tools. The prototype displayed outcomes underscoring its potential, for managing poultry facilities across multiple farms with centralized oversight.

Fracture grouting has been a widely used mitigation measure against seepage in the Yellow River Embankment. However, there is currently a lack of systematic investigation for evaluating the anti-seepage effectiveness of fracture grouting employed in this longest river embankment in China. Therefore, in this work, laboratory and in-situ experiments are carried out for investigating the reinforcement effect of fracture grouting in the Jinan Section of the Yellow River Embankment. In particular, firstly, the laboratory tests concentrate on studying the optimum strength improvement for cement-silicate grout by varying the content of backfilled fly ash and bentonite as admixtures. Flexural strength and Scanning Electron Microscope photographs are investigated for assessing the strength and compactness improvement. Subsequently, based on the obtained optimum admixtures content, in-situ grouting tests are carried out in the Jinan Section of the Yellow River Embankment to evaluate the anti-seepage effectiveness of fracture grouting, where geophysical prospecting and pit prospecting methods are employed. Laboratory results show that, compared with pure cement-silicate grouts, the gelation time of the improved slurry is longer and gelation time increases as fly ash content increases. The optimum mixing proportion of the compound cement-silicate grout is 70% cement, 25% fly ash and 5% bentonite, and the best volume ratio is 2 for the investigated cases. Geophysical prospecting using the Ground Penetrating Radar and High Density Resistivity methods can reflect the anti-seepage effectiveness of fracture grouting on site. It shows that the grouting material mainly flows along the axial direction of the embankment. The treatment that is used to generate directional fracture is proved to be effective. The injection hole interval distance is suggested to be 1.2 m, where the lapping effect of the grouting veins is relatively significant. For the investigated cases, the average thickness of the grouting veins is approximately 6.0 cm and the corresponding permeability coefficient is averagely 1.6 × 10⁻⁶ cm/s, which meets the anti-seepage criterion in practice.

Food-grinding occurs in rodents and is influenced by multiple-factors. However, the factors affecting this behavior remain unclear. In this study, we aimed to investigate the effect of food restriction on food grinding by Brandt’s voles (Lasiopodomys brandtii), as well as the potential role of the gut microbiota in this process, through a comparison of the variations between voles with different food supplies. Food restriction reduced the relative amount of ground food to a greater extent than it lowered the relative food consumption, and altered the abundance of Staphylococcus, Aerococcus, Jeotgalicoccus, and Un--s-Clostridiaceae bacterium GM1. Strong correlations between the ground-to-consumed food ratio and the abundance of fecal microbiota were found for Un--s-Clostridiaceae bacterium GM1 and Aerococcus. The content of fecal acetate and propionate for the 7.5 g-food supply group was lower than that for the 15 g-food supply group. Further, the relative amount of ground food and ground-to-consumed food ratio were both positively correlated with the acetate content. Our study indicated that food restriction can effectively inhibit food grinding. Further, Un--s-Clostridiaceae bacterium GM1 abundance, Aerococcus abundance, and acetate content were strongly related to food grinding. Variations in gut microbial abundance and metabolite short-chain fatty acid content induced by food restriction likely promote the inhibition of food grinding. These results could potentially provide guidance for reducing food waste during laboratory rodent maintenance.

In this work, we proposed a novel design of microfluidic mixer utilizing the amplified Marangoni chaotic advection induced by AC continuous electrowetting of a metal droplet situated in electrolyte solution, due to the linear and quadratic voltage-dependence of flow velocity at small or large voltages, respectively. Unlike previous researchers exploiting the unidirectional surface stress with DC bias at droplet/medium interface for pumping of electrolyte where the resulting flow rate is linearly proportional to the field intensity, dominance of another kind of dipolar flow pattern caused by local Marangoni stress at the drop surface in sufficiently intense AC electric field is demonstrated by both theoretical analysis and experimental observation, which exhibits a quadratic growth trend as a function of the applied voltage. The dipolar shear stress merely appears at larger voltages and greatly enhances the mixing performance by inducing chaotic advection between the neighboring laminar flow. The mixer design developed herein, on the basis of amplified Marangoni chaotic advection around a liquid metal droplet at larger AC voltages, has great potential for chemical reaction and MEMS actuator applications, because of generating high-throughput and excellent mixing performance at the same time.

Thyroid hormones have a catabolic effect on bone homeostasis. Hence, this study aimed to evaluate serum vitamin D, calcium, and phosphate and bone marker levels and bone mineral density (BMD) among patients with different thyroid diseases. This cross-sectional study included patients with underlying thyroid diseases (n=64, hyperthyroid; n=53 euthyroid; and n=18, hypothyroid) and healthy controls (n=64). BMD was assessed using z-score and left hip and lumbar bone density (g/cm2). Results showed that the mean serum vitamin D Levels of all groups was low (<50 nmol/L). Thyroid patients had higher serum vitamin D levels than healthy controls. All groups had normal serum calcium and phosphate levels. The bone marker levels were significantly high in the hyperthyroid group and low in the hypothyroid group. The z-score for hip and spine did not significantly differ between thyroid patients and control groups. The hip bone density was remarkably low in the hyperthyroid group. In all groups, the serum vitamin D levels were below the cutoff value. However, thyroid patients had a higher serum vitamin D level than healthy controls. The carboxy terminal collagen crosslink and procollagen type I N-terminal propeptide levels were high in hyperthyroid patients and low in hypothyroid patients. Further, hyperthyroid patients had a low hip BMD.

Sensory descriptive analysis was used to evaluate the aged Feng-flavored baijiu. The results indicated that there are notable differences in the samples of different ages. The samples with shorter storage times and fresh distilled Baijiu present bran flavor, and fresh green flavor. with the increase of storage time, the fragrance of honey, sweetness, flowers, and aging gradually increases. The samples of Feng-flavored baijiu were dected by Headspace solid-phase microextraction (HS-SPME) combined with comprehensive two-dimensional gas chromatography time-of-flight mass spectrometry (GC×GC–TOFMS) , in total, 496 sustances were identified in all samples, mainly containing 14 types of substances, such as esters, aldehydes etc., of which 42 substances were found in Feng-flavored baijiu for the first time. Chemometrics was used to analyze the key differential compounds. 143 differential compounds closely related to aging were preliminarily screened, and principal component analysis revealed that these samples were separated by year. 65 differential compounds were selected out by partial least squares discriminant analysis(PLS-DA). Furthermore, 43 key differential compounds were selected from the aged Feng-flavored baijiu combined with variable importance in projection and Pearson correlation coefficients. Partial least squares regression (PLSR) was used to research the correlation of sensory properties and key differential compounds, and the results indicated that most compounds were closely related to the aged Baijiu . This study afford theoretical basis and reference for flavor research of Feng-flavored baijiu.

In order to sustain the marine environment relationship between the environmental factors and marine biota must be investigated. This study aims to study such a correlation in the adjacent waters of Nan Wan Bay, Kenting, Taiwan, and to explore the covariance of environmental factors on marine life (whether they enhance or diminish it). To achieve these objectives, factor analysis was used to identify potential latent variables that could affect the water quality of the adjacent waters, including phytoplankton (quantity), zooplankton (quantity), and fish (quantity and species). These potential variables were named based on the results of past studies and related literature. Finally, a structural equation model (SEM) was constructed to establish a marine ecological model among the potential variables. The factor analysis results revealed that nutrients, upwelling, and primary productivity are the primary factors affecting the environmental changes in the adjacent waters of Nan Wan Bay. The comprehensive SEM showed that nutrients and primary productivity significantly impact plankton. Path analysis indicated that primary productivity has the highest direct effect on the phytoplankton cluster. However, the upwelling has a low significance in its effect on phytoplankton, zooplankton, and fish clusters. Compared to the results of past related studies, the SEM proposed in this study can reflect a considerable degree of change in the waters.

Host immunological pathways have been proposed including TH1, TH2, TH3, TH9, TH17, TH22, TH1-like, and THαβ immune reactions. Besides TH2 and TH9 immune responses which are against multicellular parasites, host immunological pathways against viruses, intracellular micro-organisms (bacteria, protozoa, and fungi), and extracellular micro-organisms can use programmed cell death pathways to trigger immune reactions or to execute effective strategies to eliminate these pathogens. These programmed cell deaths include apoptosis, autophagic death, pyroptosis, ferroptosis, necroptosis, and NETosis. Apoptosis is related to host anti-virus eradicable THαβ immunity. Autophagic death is related to host anti-virus tolerable TH3 immunity. Pyroptosis is related to host anti-intracellular micro-organism eradicable TH1 immunity. Ferroptosis is related to host anti-intracellular micro-organism tolerable TH1-like immunity. Necroptosis is related to host anti-extracellular micro-organism eradicable TH22 immunity. NETosis is related to host anti-extracellular micro-organism tolerable TH17 immunity.

Flood forecasting helps anticipate floods and evacuate people, but due to the access of a large number of iot data acquisition devices, the explosive growth of multidimensional data and the increasingly demanding prediction accuracy, classical parameter models and traditional machine learning algorithms are unable to meet the high efficiency and high precision requirements of prediction tasks. In recent years, deep learning algorithms represented by convolutional neural networks, recurrent neural networks and Informer models have achieved fruitful results in time series prediction tasks. The Informer model is used to predict the flood flow of the reservoir. At the same time, the prediction results are compared with the prediction results of the traditional method and the LSTM model, and how to apply the Informer model in the field of flood prediction to improve the accuracy of flood prediction is studied. The data of 28 floods in the Wan 'an Reservoir control basin from May 2014 to June 2020 were used, with areal rainfall in five subzones and outflow from two reservoirs as inputs and flood processes with different sequence lengths as outputs. The results show that the Informer model has good accuracy and applicability in flood forecasting. In the flood forecasting with sequence length of 4, 5 and 6, Informer has higher prediction accuracy, and the prediction accuracy is better than other models under the same sequence length, but the prediction accuracy will decline to a certain extent with the increase of sequence length. The Informer model stably predicts the flood peak better, and its average flood peak difference and average maximum flood peak difference are the smallest. As the length of the sequence increases, the number of fields with a maximum flood peak difference less than 15% increases, and the maximum flood peak difference decreases. Therefore, the Informer model can be used as one of the better flood forecasting methods, and it provides a new forecasting method and scientific decision-making basis for reservoir flood control.

A new type of gold nanoparticles was synthesized by using benzoyl pyrazolone as a capping agent. The synthesized AuNPs exhibited a spherical shape and a monodisperse and fluorescence emission characteristic peak at 650 nm. The AuNPs –BMPBP was demonstrated as sensitive and selective fluorescent chemosensor for detection of Al ³⁺ ion. In the presence of Al ³⁺ ion, the fluorescent emission of BMPBP-AuNPs at 650 nm, increased with an increasing concentration of Al ³⁺ ion with a low detection limit (2 µM), the proposed method provided to apply determination of Al ³⁺ ion of tap water with satisfactory results.

This article analyzes in detail the influence of Jupiter on the measurement of the gravitational constant. Including a specific estimate of the change in the gravitational constant caused by the change of the earth's orbital position every half month. The influence of Jupiter's perihelion and aphelion on the gravitational constant is also estimated. On this basis, this article analyzes the data with specific time records such as BIPM-01, BIPM-14, JILA-10, UCI-14, HUST-09. The analysis results show that after considering the influence of Jupiter, the experimental results have been significantly improved.

Color image binarization plays a pivotal role in image preprocessing work, significantly impacting subsequent tasks, particularly in text recognition. This paper concentrates on Document Image Binarization (DIB), aiming to separate a image into foreground (text) and background (non-text content). Through a thorough analysis of conventional and deep learning-based approaches, we conclude that prevailing DIB methods leverage deep learning technology. Furthermore, we explore the receptive fields pre- and post-network training to underscore the Transformer model's advantages. Subsequently, we introduce a lightweight model based on the U-Net structure, enhanced with the Mobile ViT module to better capture global information features in document images. Given its adeptness at learning both local and global features, our proposed model exhibits superior performance on two standard datasets (DIBCO2012 and DIBCO2017) compared to state-of-the-art methods. Notably, our proposed DIB method presents a straightforward end-to-end model devoid of additional image preprocessing or post-processing. Moreover, its parameter count is less than a quarter of the HIP'23 model, which achives best results on three datasets(DIBCO2012, DIBCO2017 and DIBCO2018). Finally, two sets of ablation experiments were conducted to verify the effectiveness of the proposed binarization model.

Regulatory T cells are key immune cells to initiate tolerable immune responses. TGFβ is the key cytokine of regulatory T cells. TGFβ is also the master cytokine to stimulate tissue fibrosis. Systemic sclerosis is an autoimmune disease related to overt organ fibrosis. Thus, systemic sclerosis is a disease related to regulatory T cell over-representation. Besides, many end stage organ failures including heart failure, liver cirrhosis, uremia, and pulmonary fibrosis also related to tissue fibrosis. Thus, TGFβ producing regulatory T cells are also involved in the pathogenesis of these end stage organ failure. Once we know the significance of TGFβ and it induced tolerable immune reactions in the pathophysiology of end organ failure, we can develop better prevention or therapeutic strategies to combat these detrimental disorders.

This study generalized the best copula to characterize the joint probability distribution between rainfall severity and duration in Peninsular Malaysia using two dimensional copulas. Specifically, to construct copulas, Inference Function for Margins (IFM) and Canonical Maximum Likelihood (CML) methods were specially exploited. For the purpose of achieving copula fitting, the derived rainfall variables by making use of the Standardized Precipitation Index (SPI) were fitted into several distributions. Five copulas, namely Gaussian, Clayton, Frank, Joe and Gumbel were put to the tests to establish the best data fitted copula. The tests produced acknowledged and satisfactory results of copula fitting for rainfall severity and duration. Surveying the Akaike Information Criterion (AIC) and the Bayesian Information Criterion (BIC), only three copulas produced a better fit for parametric and semi parametric approaches. Finally, two consistency tests were conducted and the results had shown that Frank Copula produced consistent results.

This paper investigates the hydroelastic responses of offshore floating solar photovoltaic farms (OFPVs) to minimize structural motion. The OFPV usually occupies a large sea space in the order of hectares and due to its huge structural length-to-thickness ratio, the structural deformation under wave action has to be taken into consideration. The flexible deformation of the structure under hydrodynamic loading is termed the hydroelastic response. Due to the relatively long structural length with respect to the encountering wavelength, the diffraction and radiation of waves have to be taken into account to accurately represent the hydrodynamic loadings on the floating platform. The numerical model is first validated by comparing the eigenvalues and eigenvectors of the OFPV obtained from the proposed numerical scheme with their counterparts obtained from an established finite element software. This is followed by the investigation of the hydroelastic response of various OFPVs designed in varying layout configurations. The various layout configurations are obtained by altering the floating modular units’ dimensions as well as the spacing of the OFPVs when deployed adjacent to each other. The optimal configuration that gives the best performance in terms of the overall smallest response, known as compliance, is then suggested. The results suggest that a longish OFPV layout has a lower hydroelastic response and the motion could be further reduced by increasing the global flexural stiffness via layout arrangement.

The mechanism of immune activation and de-activation is very important. Host should trigger effective immunity against pathogen infection. And, host cannot trigger immunity against self-antigens that will lead to detrimental autoimmune disorders. Spleen and liver have opposite roles in mediating immune responses. Spleen is the organ involving in immune activation, and liver is the organ involving in immune de-activation. Sympathetic nerve system and parasympathetic nerve system have opposite roles in mediating immune responses. Sympathetic nerve system is involving in pro-inflammatory, and parasympathetic nerve system is involving in anti-inflammatory. ACTH and glucocorticosteroid have opposite roles in mediating immune responses. ACTH is involving in activating adaptive immunity with inhibiting innate immunity, and glucocorticosteroid is involving in activating innate immunity with inhibiting adaptive immunity. The molecular chaperons, heat shock proteins, which are induced by fever, have the vital roles in immune activation. On the contrary, IgD B cells and gamma-delta T cells are causing immune de-activation via the mechanism of clonal anergy. These mechanism can help us the know the work of immunological pathways better for better control of infectious diseases and autoimmune disorders.

Brucella abortus is a facultative intracellular Gram-negative bacterium that causes chronic persistent infections in humans and livestock. In this study, conventional bio-typing, multiple-locus variable-number tandem repeat analysis (MLVA), and whole-genome sequencing-single-nucleotide polymorphism (WGS-SNP) were used to investigate the molecular epidemiology characteristics of Brucella abortus strains in China and their relationships to world lineages. A total of 100 strains were collected from 1953 to 2013, suggesting that B. abortus circulated in China in the past five decades. Moreover, most strains were mainly distributed in the northwest area. During this period, seven biovars were found, indicating that B. abortus displayed a high diversity of biovars and that the main epidemic areas are in the northern provinces. Strains have high genetic diversity, and bruce07 is the most helpful locus for genotyping of this population. Moreover, 17 MLVA-11 genotypes were found; 13 of them are of known genotypes and four are unassigned genotypes, indicating that B. abortus in this study had several geographic origins. Still, strains from unassigned genotypes may originate from China. Many shared MLVA-16 genotypes were observed in strains from the same provinces in Northern China, which confirmed a brucellosis outbreak within northern regions. WGS-SNP analysis showed that eight Chinese strains formed a ladder-like phylogram (C. Ⅶ) with strains from nine countries, including Uganda, Iraq, Russia, Georgia, Spain, Italy, Egypt, Mongolia, and China; strains were introduced to these countries from a single source. Notably, Chinese strains were closely related to strains from Russia and Mongolia; frequent animal (cattle) trade and exchanges may promote this process. We will provide new and insightful information for strength surveillance and control of B. abortus brucellosis in China.

Today’s intruders usually send attacking commands to a target system through several stepping-stone hosts, in order to reduce the chance of being detected. With stepping-stone intrusion (SSI), the intruder’s identity is hidden behind a long interactive chain of hosts and very hard to detect. An effective approach for SSI detection (SSID) is to estimate the length of the chain. This type of method is called network-based SSID. Most existing network-based SSID worked effectively only when intruders’ session manipulation was not present. These known SSID algorithms are either weak to resist intruders’ chaff-perturbation manipulation or having very limited capability in resisting attacker’s session manipulation. This paper develops a novel network-based SSID algorithm resistant to intruders’ chaff-perturbation by using packet crossover. Our proposed SSID algorithm is simple and easy to implement as the number of packet crossovers can be easily computed. We conduct rigorous technical proofs to verify the correctness of our proposed algorithm. The experimental results show that our proposed SSID algorithm works effectively and perfectly in resisting intruders’ chaff-perturbation up to 50% chaff rate.

Various studies on the physical characteristics of the canopy gaps in tropical and subtropical regions but that in the mangrove swamp forest in Malaysia is little known. The objectives of this study are to assess the canopy gaps physical characteristics (size, form, direction), to assess the changes in soil physical characteristics and microenvionment in and around the canopy gaps. Five canopy gaps were selected formed by lightning strikes, gaps size and shapes were determined using the portable Global Positioning System and photographic images were analysed using ForestCrown. Result shows that canopy gap opening has increased the total light reaching the forest floor, changed the canopy gap microenvironment. Strong correlation between canopy opening percentage and temperature of gaps explains the changes of canopy gaps characteristics. These changes have contributed to new seedling germination, regeneration and maintaining the canopy gap dynamics.

Powdery mildew disease, caused by Sphaerotheca fusca, is a major disease affecting cucumbers cultivated in greenhouses. This study was conducted to find defense genes induced by DL-3-amino-butyric acid (BABA) and powdery mildew in cucumber. The 2000 and 5000 mg/L BABA treated cucumber exhibited disease severity of 25% and 5%, respectively, whereas the water treated cucumber leaves were severely infected, with a disease severity of 90%. BABA did not effect spore germination of the powdery mildew pathogen,. showing BABA is not antifungal agent against the pathogen. In quantitative real-time PCR analysis, BABA treated cucumber upregulated transcriptional level of the defense genes CsPAL, CsPR3,CsPR1, CsLOX1, CsLOX23, Cs LecRK6.1, CsWRKY20, and Cupi4 in cucumber to maximum levels at 48 h, whereas CsLecRK6.1 reached maximum expression after 24 h and futher salicylic acid (SA) levels were significantly increased in BABA-treated cucumber plants. In addition, the infected cucumber with powdery mildew enhanced the expression levels from1.6 to 47.3 fold of the defense genes PAL, PR3, PR1, Lox1, Lox 23, LecRK6.1, WRKY20, and Cupi4 compared to heathy cucumber. The results suggests the BABA induced defense response is associated with SA signal pathway-dependent systemic acquired resistance (SAR) in cucumber, which is involved in plant resistance mechanisms.

Systemic lupus erythematosus (SLE) is a prevalent autoimmune condition, yet its alignment with a specific host immunological pathway remains unclear. The THαβ host immunological pathway, recognized for its defense against viruses and prions, has recently emerged as a response to DNA, RNA, and protein pathogens. SLE patients often produce anti-double strand DNA antibodies and anti-nuclear antibodies, suggesting a potential association with the THαβ host immune reaction. Throughout the course of SLE, elevated levels of type 1 interferons, type 3 interferons, interleukin-10, IgG1, and IgA1 are commonly observed. These cytokines and antibody isotypes are indicative of the THαβ host immunological pathway. Similarly, Myasthenia gravis, Grave’s disease, Graft versus host disease, autoimmune hemolytic anemia, immune thrombocytopenia, dermatomyositis, and Sjogren’s syndrome are also linked to THαβ-related type 2 hypersensitivities. Considering the potential association of these diseases with dysregulated THαβ immune responses, therapeutic strategies such as anti-interleukin-10 or anti-interferons α/β could be explored to manage these disorders effectively.

Weather radar plays a crucial role in the monitoring of severe convective weather. However, due to its limited detection range, it cannot conduct effective monitoring in remote offshore areas. Therefore, this paper utilized the Unet++ to establish a model for retrieving radar composite reflectivity based on Himawari-9 satellite datasets. In the process of comparative analysis, we found that both satellite and radar data exhibit significant diurnal cycles, but there are notable differences in their variation characteristics. To address this, we established 4 comparative models to test the influence of latitude and diurnal cycles on the inversion results. The results show that adding the distribution map of the minimum cloud-top brightness temperature at the corresponding time in the model can effectively reduce the root mean square error (RMSE) of the model and enhance the accuracy of severe convective weather monitoring. This conclusion can be applied in the future to enhance and improve satellite quantitative precipitation estimation.

Mechanochemical production of copper (II) isonicotinate Metal-Organic Framework ([Cu (INA)2]-MOF) and its modified magnetic iron composite ([Cu (INA)2]-MOF@Fe3O4]) allowed for the adsorptive removal of Terbutaline from water. A variety of characterization techniques, including Fourier, transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and scanning electron microscopy (SEM), were used to elucidate the distinct chemical and morphological features of the two advanced materials. The optimal adsorption conditions were determined by investigating a wide range of adsorption-related variables, including contact time, initial Terbutaline concentration, adsorbent dosages pH, and temperature. The chemistry involved in the adsorption process between the adsorbents and the adsorbate molecules was evaluated using the best-fitting models, such as kinetics, isotherms, and thermodynamics, and the regeneration study was performed to evaluate the adsorbents' reusability. Incredibly maximum adsorption capacities (Qmax) of 1667 and 2500 mg L-1 were attained within 40 minutes under alkaline pH 11 by the [Cu (INA)2]-MOF and the [Cu (INA)2]-MOF@Fe3O4, respectively. The adsorbents have been proven to be good for the adsorption of Terbutaline as a priority pollutant in an aqueous solution, with pseudo-first order and Langmuir as the best-fitting models for the kinetic and isotherm models respectively.

Recently, various relations and criteria have been presented to establish a proper relationship between control systems and control Global Positioning System (GPS)-intelligent buoy system. Given the importance of controlling the position of buoys and the construction of intelligent systems, in this paper, dynamic system modeling is applied to position marine buoys through the improved neural network with a backstepping technique. This study aims at developing a novel controller based on adaptive fuzzy neural network to optimally track the dynamically positioned vehicle on water with unavailable velocities and unidentified control parameters. In order to model the network with the proposed technique, uncertainties and the unwanted disturbances are studied in the neural network. The presented study aims at developing a neural controlling which applies the vectorial back-stepping technique to the surface ships, which have been dynamically positioned with undetermined disturbances and ambivalences. Moreover, the objective function is to minimize the output error for the neural network (NN) based on closed-loop system. The most important feature of the proposed model for the positioning buoys is its independence from comparative knowledge or information on the dynamics and the unwanted disturbances of ships. The numerical and obtained consequences demonstrate that the controller system can adjust the routes and the position of the buoys to the desired objective with relatively few position errors.

This study utilised an ensemble of pre-trained networks and digital mammograms to develop a supplementary diagnostic tool for radiologists. Digital mammograms and their associated information were collected from the department of radiology and pathology, Hospital Universiti Sains Malaysia. Thirteen pre-trained networks were selected and explored in this study. ResNet101V2 and ResNet152 had the highest mean PR-AUC, MobileNetV3Small and ResNet152 had the highest mean precision, ResNet101 had the highest mean F1 score, and ResNet152 and ResNet152V2 had the highest mean Youden J index. Subsequently, three ensemble models were developed using the top three pre-trained networks based on PR-AUC, precision, and F1 score. The final ensemble model had a mean precision, F1 score, and Youden J index of 0.82, 0.68, and 0.12, respectively. Additionally, the final model demonstrated a balanced performance across mammographic density. In conclusion, this study exhibited the good performance of the ensemble transfer learning on digital mammograms for the purpose of breast cancer risk estimation. This model can be utilised as a supplementary diagnostic tool for radiologists, thus, reducing their workloads.

This study aimed to determine the feasibility of the development of an over-the-counter (OTC) screening model using machine learning for breast cancer screening in the Asian women population. Data were retrospectively collected from women who came to the Hospital Universiti Sains Malaysia, Malaysia. Five screening models were developed based on machine learning methods; random forest, artificial neural network (ANN), support vector machine (SVM), elastic-net logistic regression and extreme gradient boosting (XGBoost). Features used for the development of the screening models were limited to information from the patients’ registration form. The model performance was assessed across the dense and non-dense groups. SVM had the best sensitivity while elastic-net logistic regression had the best specificity. In terms of precision, both random forest elastic-net logistic regression had the best performance, while, in terms of PR-AUC, XGBoost had the best performance. Additionally, SVM had a more balanced performance in terms of sensitivity and specificity across the mammographic density groups. The three most important features were age at examination, weight and number of children. In conclusion, OTC models developed from machine learning methods can improve the prognostic process of breast cancer in Asian women.

Over the centuries, honey is known for its superior usage in culinary, and for its rich nutrition and therapeutic values which are scientifically proven in the medical field. The chemical composition of honey varies depending on its botanical sources and environment. Therefore, the nutrition content in honey is highly likely to be affected by contaminants, such as heavy metals and pesticides. To ensure the quality of honey, parameters such as the heavy metal content should be within the safe range of total standard mineral and trace elements as defined by the International Food Standard (Codex Alimentarius), and pesticides should not be present at all. The high concentration of heavy metal and pesticides not only deteriorates the quality and quantity of honey, but also causes harm to the bee colony itself. In the agriculture sector, the excessive usage of pesticides and fertilizer negatively impacts the overall honey production process. Bees, a pollinating agent, bring the polluted nectar back to their beehives, eventually contaminating the honey and depreciating its value. Hence, this article will comprehensively review the activities that contribute to heavy metal and pesticide contamination, the interactions of bees as a pollinating agent, the impact of the pollutant to the colonies, and subsequently to the honey production.

Joining of aluminium alloys to steels has been extensively studied, especially in the automotive sector. However, aluminium alloys are known to be difficult to join with steels when methods involving fusion welding are used because of hot cracking problem. Hence, a high strength joint between these dissimilar metals would be of benefit especially in reducing the weight of products. In this work the torch brazing method was applied to join AR500 steel with AA7075 aluminium alloy using Al-Si-Zn base filler metal at various flame times. The effect of the brazing work on the intermetallic phase formation and the mechanical strength of the joints were investigated. In this work, the maximum shear load obtained was 6460 N and the presence of the intermetallic phases had reduced the shear strength of the brazed joints. However, the torch brazing process using Al-Si-Zn filler metal had successfully facilitated the joining of these dissimilar metals.

Pomegranate juice (PJ) has total antioxidant capacity (TAC) which is reportedly higher compared to other common beverages. This short study aimed to evaluate the TAC of commercial PJ and pomegranate fruit in terms of a newly described iron (III) reducing antioxidant capacity (iRAC) and to compare with ABTS free radical quenching activity. Commercial PJ, freeze-dried pomegranate, and oven dried-pomegranate were analyzed. The total phenols content (TPC) was also assessed by the Folin-Ciocalteu method. The calibration results for iRAC were comparable to ABTS and Folin-Ciocalteu methods in terms of linearity (R2 > 0.99), sensitivity and precision. The TAC for PJ expressed as trolox equivalent antioxidant capacity (TEAC) was 33.4 ± 0.5 mM with the iRAC method and 36.3 ± 2.1 mM using the ABTS method. For dried pomegranates, TAC was 89–110 mmol/100 g or 76.0 ± 4.3 mmol/100 g using iRAC and ABTS methods, respectively. Freeze-dried pomegranate had 15% higher TAC compared with oven-dried pomegranate. In conclusion, pomegranate has high TAC as evaluated by the iRAC and ABTS methods, though variations occur due to the type of cultivar, geographic origin, processing and other factors. The study is relevant for attempts to refine food composition data for pomegranate and other functional foods.

An outbreak of a virus-like disease has caused severe damage to noni plants (Morinda citrifolia L.) in Xishuangbanna area of China's southwestern Yunnan province since 2015. The diseased plants displayed typical mosaic symptom with light and dark green patches on leaves. Flexuous filamentous virus particles of about 800 nm in length were observed from the leaf saps by transmission electron microscope. Illumina transcriptomic sequencing further revealed the presence of a potyvirus and its near complete genome was obtained from de novo assembly. The complete genome of 9,659 nts was obtained by Sanger sequencing of eight amplicons generate by RT-PCR and 5’ and 3’ RACE. BLASTp analysis of the polyprotein sequence showed that the virus was most closely related to Tobacco vein banding mosaic virus (TVBMV), but these two viruses only shared 50.7% amino acid sequence similarity. Both phylogenetic analyses of the polyprotein and CP amino acid sequences indicated that this virus is a member of genus Potyvirus. However, the low sequence homology with all known potyviruses established this virus as a new species in the genus, tentatively named as Noni mosaic virus (NoMV). Our field surveys showed that 100% of the symptomatic samples and 28.57% of the asymptomatic samples were infected with this novel potyvirus. Aphids collected from diseased leaves were also detected carrying the virus. In summary, our data indicated that a novel species of potyvirus, NoMV, is prevalent in Yunnan, China and is associated with an emerging mosaic disease on M. citrifolia.

This paper proposes an optimization method for the scheduling of a multi-energy virtual power plant supply-demand balance in the power market environment of Jiangxi Province. The objective of this method is to enhance the operational efficiency of the power grid, reduce energy costs, and facilitate economical and efficient energy distribution in the power market. The method comprehensively considers the characteristics and uncertainties of renewable energy sources such as solar and wind energy, and incorporates advanced multi-objective optimization algorithms. Additionally, real-time market price feedback is integrated to achieve accurate allocation of power supply and demand. Through a case study of a multi-energy virtual power plant in Jiangxi Province, this paper examines the optimal combination model for various energy sources within VPP, and analyzes the impact of different market environments on supply-demand balance. The results demonstrate that the proposed scheduling optimization method significantly improves economic benefits while ensuring grid stability. Compared with traditional power supply models, it reduces average electricity costs by 15% and increases renewable energy utilization efficiency by 20%.

This paper proposes an approach for image data extraction and driving behavior analysis using geographic information and driving data. Information derived from geographic and global positioning systems was used for image data extraction. In addition, we used an onboard diagnostic II and a controller area network bus logger to record driving data for driving behavior analysis. Driving behavior was analyzed using sparse automatic encoders and data exploration to detect abnormal and aggressive behavior. A regression analysis was used to derive the relationship between aggressive driving behavior and road facilities. Several traffic improvements were proposed for specific intersections and roads. The results indicate that lane ratios without lane markings and with straight lane markings are important features that affect aggressive driving behaviors.

This study primarily investigates the effect of fly ash (FA) content on the mechanical properties and hydration performance of alkali-activated ground granulated blast furnace slag cements (AAGC), and compares the related properties with ordinary Portland cement (OPC). Additionally, the study examined the hydration products, thermal analysis, MIP, SEM, chemically bound water, and pH values of AAGC. The compressive strength of AAGC showed a retrogression phenomenon from 3 to 28 days, with the 14-day and 28-day compressive strengths of AAGC being higher than those of OPC. The AAGC with 20% FA content exhibits the highest 28-day compressive strength (75 MPa). The hydration heat release rate curved of OPC and AAGC can be divided into the initial induction period, induction period, acceleration period, deceleration period and steady period. As FA content increases, the 28-day pore volume of AAGC increased while pH values and chemically bound water decrease. SEM images of AAGC with low FA content showed more microcracks.

Recently, the awareness of energy conservation, carbon emission reduction, and environmental protection in Taiwan has begun to gradually improve, and bicycles have become an important vehicle for residents. In 2009, Kaohsiung began promoting public bicycle sharing. The number of users in that year amounted to 140,000. By 2015, the accumulated number of users reached nine million. This study adopted the Theory of Planned Behavior (TPB) to explore the factors influencing the behavioral intentions of public bicycle users, including the three dimensions of attitude, subjective norm, and perceived behavioral control, and probed into the relationship between the factors influencing the behavioral intentions of public bicycle users in Kaohsiung City and the dimensions. This study used a questionnaire to collect data and SPSS & AMOS for statistical analysis. The empirical results demonstrated that the most prominent factors influencing the behavioral intentions of public bicycle users in Kaohsiung City included perceived behavioral control, attitude, and subjective norm, in order. Among the influencing factors in the three dimensions, personal interests, main groups, and self-competence had a positive and significant correlation. Administrators should provide more incentives related to the three influencing factors to encourage the public in Kaohsiung City to use public bicycles more frequently as their short-distance travel mode, so as to achieve the purposes of saving energy, reducing carbon emissions, and protecting the urban environment.

This study is a two-phase hybrid study on the behavioral activities of undergraduate students during the COVID-19 pandemic lockdown. A questionnaire survey of students during the whole school period and a semistructured interviews with 13 undergraduates of different majors were conducted. First, we found that compared with primary and secondary school students, undergraduates showed many problems with self-time management. Second, the behavior of undergraduates at home may result from multiple factors, such as past experience, professional identity and behavioral habits. When secondary school provided a relatively relaxed learning environment or secondary school teachers placed more emphasis on continuous effort, and when students had a strong sense of the social value of their undergraduate major, students worked harder and achieved more during the pandemic. Otherwise, it was easier for students to slack off and be passive during the pandemic. Altogether, this study deepens our understanding of undergraduates' self-management of free time, and the differences in the values underlying different behaviors and the formation process of various behaviors.

Against the backdrop of the current carbon peaking and carbon neutrality policies, higher requirements have been put forward for the upgrading and construction of smart grids. Non-intrusive load monitoring (NILM) technology is a key technology for advanced measurement systems at the end of the power grid. It obtains detailed power information of the load, without the need for traditional hardware deployment. The key step to solve this problem is load decomposition and identification. This paper first utilized Long Short Term Memory-Denoising Autoencoder(LSTM-DAE) to decompose the mixed current signal on the household busbar and obtain the current signals of multiple independent loads that constituted the mixed current. Then, the obtained independent current signals were combined with voltage signals to generate multi-cycle colored Voltage-Current(VI) trajectories, which were color-coded according to the background. These colored VI trajectories with background colors formed a feature library. When the CNN network was used for load recognition, considering the influence of hyperparameters on recognition results, the BOA algorithm was used for optimization, and the optimized CNN network was employed for VI trajectory recognition. Finally, the proposed method was validated using the PLAID dataset. Experimental results showed that the proposed method exhibited better performance in load decomposition and identification.

Bacillus Calmette-Guérin (BCG) is the only widely used prophylactic tuberculosis (TB) vaccine that can prevent severe TB in infants. However, it provides poor protection in adults, and therefore, there in ongoing research on new TB vaccines and immunization strategies with more durable immune effects. The recombinant BCG and BCG prime-protein booster are two important vaccine strategies that have recently been developed based on BCG and could improve immune responses. In this study, three immune strategies based on four protective antigens, namely, ESAT-6, CFP-10, nPPE18, and nPstS1, were applied to construct recombinant rBCG-EPCP009, EPCP009 subunit protein, and BCG prime-EPCP009 booster vaccine candidates. The short- and long-term immune effects after vaccination in Balb/c mice were evaluated based on humoral immunity, cellular immunity, and the ability of spleen cells to inhibit in vitro mycobacterial growth. At 8 and 12 weeks after the initial immunization, splenocytes from mice inoculated with the BCG prime-EPCP009 protein booster secreted higher levels of PPD- and EPCP009-specific IFN-γ, IL-2, TNF-α, IL-17, GM-CSF, and IL-12 and had a higher IFN-γ⁺CD4⁺ TEM:IL-2⁺CD8⁺ TCM cell ratio than splenocytes from mice inoculated with the rBCG-EPCP009 and EPCP009 proteins. In addition, the EPCPE009-specific IgG2a/IgG1 ratio was slightly higher in the BCG prime-EPCP009 protein booster group than in the other two groups. The in vitro mycobacterial inhibition assay showed that the splenocytes of mice from the BCG prime-EPCP009 protein booster group exhibited stronger inhibition of Mycobacterium tuberculosis （M. tuberculosis）growth than the splenocytes of mice from the other two groups. These results indicate that the BCG prime-EPCP009 protein booster exhibited superior immunogenicity and M. tuberculosis growth inhibition to the parental BCG, rBCG-EPCP009, and EPCP009 proteins under in vitro conditions. Thus, the BCG prime-EPCP009 protein booster may be important for the development of a more effective adult TB vaccine.

This study presents an instant preview and analysis system implementation of intelligent stereo cameras (ISCs). A parameter optimization prototype adopted the instant preview and analysis system of the ISCs has been achieved the automatic alignment function, and obtained optimal stereo films with the automatic alignment function by adjusting gap and angle between dual cameras. The instant preview and analysis system of the ISCs with parameter optimization can enhance the quality of stereo films effectively and reduce filmed errors and save retouched cost and time in harsh filmed environment.

Asthma is a chronic respiratory disease characterized by hyperreactivity in the airways, which can lead to significant lung damage if not properly managed. While placebos—medications with no active therapeutic ingredients—are sometimes used in clinical trials to gauge the effectiveness of asthma treatments, their long-term use raises concerns. Placebos work primarily through psychological mechanisms by enhancing patients’ expectations of treatment. However, prolonged reliance on placebo treatment in asthma could potentially mask symptoms, delay proper management, and lead to undetected lung damage or other adverse effects. This study explores the potential risks and consequences associated with long-term placebo use in asthma management.

The negative impact of the modern-day lifestyle on the environment is aggravated during the COVID-19 pandemic through the increased use of single-use plastics from food takeaways to medical supplies. Similarly, the closure of food outlets and disrupted supply chains have also resulted in significant food wastage. As the pandemic rages on, the aggravation of increased waste becomes an increasingly urgent problem that threatens the biodiversity, ecosystems, and human health worldwide through pollution. While there are existing methods to deal with the organic and plastic waste, many of the solutions also cause additional problems. Increasingly proposed as a natural solution to man-made unnatural problems, there are insect solutions for dealing with the artificial and organic waste products towards a circular economy, making the use of natural insect solutions commercially sustainable. This review discusses the findings and how some of these insects, particularly the Hermetia illucens, Tenebrio molitor, and Zophobas morio, can play an increasing important role in food and plastics, with a focus on the latter.

The effects of reaction temperature, reaction time, heating rate, nitrogen flow rate and catalyst quality on the oil yield and oxygen content in the oil were investigated by using the single factor principle. Too high and too low reaction temperature, nitrogen flow rate, heating rate and reaction time have improved the yield of bio-oil, but the oxygen content in bio-oil is higher. The reduction of catalytic dose is beneficial to the increase of oil yield but not conducive to the increase of aromatic compound content. The optimal reaction conditions were observed as reaction temperature of 500℃, nitrogen flow rate of 110 mL/min, heating rate of 20℃/min, reaction time of 15min, mass ratio of catalyst to coconut coat powder was 1, and the oil yield was 4.97%, aquatic yield was 35.80%, and solid yield was 30.78%. The gas yield was 28.45%, the oxygen content was 10.3%, and the aromatic compound content was 89.7%.The analysis of catalytic cracking mechanism shows that most of the oxygen-containing compounds in the bio-oil are generated into water and aromatic compounds by catalytic cracking reaction at high temperature, thus removing oxygen.

Quadruped robots possess significant mobility in complex and uneven terrains due to their outstanding stability and flexibility, making them highly suitable in rescue missions, environmental monitoring, and smart agriculture. With the increasing use of quadruped robots in more demanding scenarios, ensuring accurate and stable state estimation in complex environments has become particularly important. Existing state estimation algorithms relying on multi-sensor fusion, such as those using IMU, LiDAR, and visual data, often face challenges on non-stationary terrains due to issues like foot-end slippage or unstable contact, leading to significant state drift. To tackle this problem, this paper introduces a state estimation algorithm that integrates an Invariant Extended Kalman Filter (InEKF) with a disturbance observer, aiming at estimating the motion state of quadruped robots on non-stationary terrains. Firstly, foot-end slippage is modeled as a deviation in body velocity and explicitly included in the state equations, allowing for a more precise representation of how slippage affects the state. Secondly, the state update process integrates both foot-end velocity and position observations to improve the overall accuracy and comprehensiveness of the estimation. Lastly, a foot-end contact probability model, coupled with an adaptive covariance adjustment strategy, is employed to dynamically modulate the influence of the observations. These enhancements significantly improve the filter's robustness and the accuracy of state estimation in non-stationary terrain scenarios. Experiments conducted with the Jueying Mini quadruped robot on various non-stationary terrains show that the enhanced InEKF method offers notable advantages over traditional filters in compensating for foot-end slippage and adapting to different terrains.

Since the past few decades, numerous modifications and innovations have been done to design the optimal corneal biomatrix for corneal epithelial cells (CECs) or limbal epithelial stem cells (LESCs) carriers. However, researchers have yet to discover the ideal optimization strategies in the development of corneal biomatrix design and its effects on cultured CECs or LESCs. This review further discusses and summarizes recent optimization strategies to develop an ideal collagen biomatrix and its interaction with CECs and LESCs. Using PRISMA guidelines, the articles published from June 2012 to June 2022 were systematically searched using Web of Science (WoS), Scopus, PubMed, Wiley, and EBSCOhost databases. The literature search identified 444 potential relevant published articles, with 29 relevant articles selected based on the inclusion and exclusion criteria after the screening and appraising processes. The current paper highlights the physicochemical and biocompatibility (in vitro and in vivo) characterization methods, which were inconsistent throughout the different studies. Despite the variability in the methodology approach, the reviewer postulated that the modification of the collagen biomatrix improves its mechanical and biocompatibility properties toward CECs and LESCs. All findings were discussed in this review; thus, it provides a general view of up-to-date trends in this field.

The aim of this paper is to use deep learning tools to innovate pre-trained object detection models to improve the accuracy of non-destructive testing (NDT) of civil aviation maintenance. First, this thesis classifies object defects for NDT, such as cracks, undercut, etc. Nowadays, thesis surveys innovation deep-learning methods technology is used to improve the defect detection performance inferencing capability, increase the accuracy and efficiency of automatic identification which in enhanced the safety and reliability of aircraft fuselage in future, mark hidden cracks and solve the challenges that cannot be identified by manual inspection. Second, recent mainstream techniques the YOLOv4 neural network to the graphics card GPU core operator to speed up the recognition of defect images is being applied to the non-destructive inspection process of aircraft maintenance on A, C and D-Level, fully validating the deep learning model's powerful defect detection target capability. The attention-based YOLOv4 algorithm is improved by applying a one-stage attention mechanism to the YOLOv4, thereby improving the accuracy of the innovation model. Finally, thesis improved YOLOv4 based on an attention mechanism is proposed for object detection NDT via the deep learning method to effectively improve and shorten the inspection anomaly detection method for automatic detection sensor systems.

To ensure the safety in aircraft flying, we aim use of the deep learning methods of nondestructive examination with multiple defect detection paradigms for X-ray image detection posed. The use of the Fast Region-based Convolutional Neural Networks (Fast R-CNN) driven model seeks to augment and improve existing automated Non-Destructive Testing (NDT) diagnosis. Within the context of X-ray screening, limited numbers insufficient types of X-ray aeronautics engine defect data samples can thus pose another problem in training model tackling multiple detections perform accuracy. To overcome this issue, we employ a deep learning paradigm of transfer learning tackling both single and multiple detection. Overall the achieve result get more then 90% accuracy based on the AE-RTISNet retrained with 8 types of defect detection. Caffe structure software to make networks tracking detection over multiples Fast R-CNN. We consider the AE-RTISNet provide best results to the more traditional multiple Fast R-CNN approaches simpler translate to C++ code and installed in the Jetson™ TX2 embedded computer. With the use of LMDB format, all images using input images of size 640 × 480 pixel. The results scope achieves 0.9 mean average precision (mAP) on 8 types of material defect classifiers problem and requires approximately 100 microseconds.

A flexible asymmetric supercapacitor (ASCs) is successfully developed by using the composite of MoO3 and graphene oxide (GO) electrochemically deposited on carbon cloth (CC) (MoO3/rGO/CC) as the negative electrode, the MnO2 deposited on CC (MnO2/CC) as the positive electrode and Na2SO4/polyvinyl alcohol (PVA) as gel electrolyte. The results show that the introduction of GO layer can remarkably increase the specific capacitance of MoO3 from 282.7 F g-1 to 341.0 F g-1. Furthermore, the combination of such good electrode materials and a neutral gel electrolyte renders the fabrication of high-performance ASC with a large operating potential difference of 1.6 V in 0.5 mol L-1 Na2SO4 solution of water. Furthermore, the ASCs exhibit excellent cycle ability and the capacitance can maintain 87 % of its initial value after 6000 cycles. The fact that a light-emitting diode can be lighted up by the ASCs indicates the device’s potential applications as energy storage devices. The encouraging results demonstrate a promising application of the composite of MoO3 and GO in energy storage devices.

Postmenopausal osteoporosis, a metabolic bone disease associated with aging and that affects bones throughout the body, is emerging as an urgent public health concern and imposes a substantial healthcare burden on society. The clinical application of bisphosphonate, the primary treatment for osteoporosis, is limited owing to the drug’s severe complications. Herein, we investigate the synthesis and utilization of strontium-doped mesoporous bioactive glass loaded with alendronate (ALN@Sr-MBG) as a novel therapeutic agent for osteoporosis, to explore its potential as an alternative to alendronate (ALN). Strontium-doped mesoporous bioactive glass (Sr-MBG) was synthesized using the sol-gel method, while ALN@Sr-MBG was obtained by incorporating Sr-MBG into an alendronate saturated solution. The bioactivities of ALN@Sr-MBG, including biotoxicity, inflammation inhibition, and anti-osteoclast differentiation, were investigated in vitro using CCK-8, flow cytometry, tartrate-resistant acid phosphatase (TRAP) staining, and RT-PCR assays. Animal models were established by surgically removing the ovaries from non-pregnant female C57/BL mice, followed by weekly intraperitoneal injections of ALN@Sr-MBG, ALN, or excipients. After 8 weeks, the mice femurs were extracted and analyzed through Micro-CT scanning, and hematoxylin-eosi, osteoblastic, and osteogenic staining. The in vitro findings demonstrated that ALN@Sr-MBG displayed enhanced biological efficacy compared to ALN in terms of inflammation inhibition, osteogenesis promotion, and osteoclastogenesis inhibition. Furthermore, micro-CT analysis revealed that ALN@Sr-MBG significantly augmented bone mineral density (BMD), bone volume fraction (BV/TV), trabecular number (Tb.N), and trabecular thickness (Tb.Th), while reducing trabecular separation (Tb.Sp) and structural model index (SMI) in mice with ovariectomy-induced osteoporosis. The osteoblast and osteogenic staining results indicate the enhanced bioactivities of ALN@Sr-MBG in promoting bone formation and inhibiting bone resorption compared to ALN. In vitro and in vivo assessments further confirmed that ALN@Sr-MBG exhibits superior anti-osteoporotic bioactivity compared to ALN. The study findings confirm the potential of ALN@Sr-MBG as a novel alternative therapy to ALN and drug candidate for the treatment of osteoporosis.

The potential effect of implementing environmental regulations on economic growth is a controversial issue for a long time. As portrayed by Porter hypothesis, environmental regulations may impact on economic growth by reconstructing the economic structure. A number of previous literature proved the connections between the above three parties. With the intention of exploring the nature of this mechanism, it is important to understand the internal inter-relation of the three parties, requiring data from a large economy experiencing the transition in economic structure. By constructing a panel containing data from 30 Chinese provinces over 10 years (2008-2019), this paper investigate the dynamic inter-relation of the three parties by introducing PVAR model with Granger Test. Results reveal that environmental regulations give a “U” shaped impact to economic growth. In return, economic growth promotes the development of economy with a weakening strength. In addition, results also support the hypothesis that economic structure is the intermediate of economic growth and environmental regulations. There is a rooftop for the effect of economic structure to environmental regulations. The rooftop may signify the best optimization of primary structure.

Characters are one of the most important elements in composing digital animation. The appear-ance and voice of a character should be designed to express the personality and values of the character. However, it is not easy for animation producers to harmoniously match the appear-ance and voice of a character. Advances in deep learning technology have made it possible to overcome this limitation. To achieve this, firstly, an audio-visual dataset of characters is required. In this study, we construct and verify a Korean audio-visual dataset consisting of frontal face im-ages of various characters and short voice clips. We developed an application that can automati-cally extract the frontal face image and a short voice clip of a character by collecting videos up-loaded to YouTube. Through this, a dataset consisting of a total of 1,522 face images and a total of 7,999 seconds of voice clips was built based on 490 characters. Furthermore, we automatically la-bel characters by gender and age to validate the dataset. The dataset built in this study is expected to be used in various deep learning fields, such as classification, generative adversarial networks, and speech synthesis.

Based on the 2014-2015 China Education Panel Survey (CEPS) and using the propensity score matching method, we studied the causal relationship between physical exercise and prosocial behavior of junior middle school students in China. Ordinary least squares regression and propensity score matching estimation results showed that participation in physical exercise significantly increases students’ prosocial behavior by more than 0.2 standard points. The results of this study were tested and found to be robust.

A scientific investigation into visual preferences of rural recreation path landscapes is crucial for enhancing visual qualities and visitors' experience. Taking Baofeng, a representative traditional village in Yunlong, as an example, this study analyzed the visual preference of three typical linear recreational paths with different landscape attributes. We used eye-tracking technology to collect eye movement data and conducted a subjective semantic differential evaluation. Our findings manifest a general inclination amongst individuals to favor closer views and paths with clear trajectories and rich elevation changes while walking, despite preference differences on different types of paths. Regarding group diversity, more inclusive design should be made to meet the sensory needs of different groups. Moreover, despite the limited level of correlation between subjective and objective evaluation methods, combining these two approaches remains indispensable. This synthesis advances prior quantitative landscape evaluation with a specific focus on rural path landscapes and upholds the integrity of results by combining objectivity with subjectivity. It also provides relevant design suggestions for further rural renewal and path planning of Baofeng village.

Immunosensors have been widely developed to use antibodies to detect a pathogen of interest; it is interesting to look at the effect of nonspecific antibody binding to E. coli using electrochemical methods. IgG antibody not specific to E. coli O157:H7 was crosslinked onto a screen-printed carbon electrode. The presence of E. coli at 4, 4 × 10², 4 × 10⁵, and 4 × 10⁸ CFU/mL on the electrode surface was detected via linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS). Current transfer at both electrodes was reduced as the concentration of bacteria increased; however, the calibration of number of cells to decreased current was nonlinear for IgG-modified electrodes. The nonlinearity is confirmed by EIS measurements which showed highest impedance at 4 CFU/mL E. coli when impedance should be the lowest. FESEM images showed higher binding of cells when IgG is present compared to electrodes with reduced graphene oxide (rGO) alone. Electrodes with rGO alone show less attachment of E. coli, with EIS showing a linear calibration profile, while LSV shows not much difference in current values for all concentrations aside from the highest concentration. These results suggest that nonspecific binding can provide false signals in electrochemical measurements, and it is crucial to provide proper controls.

The lack of a generalizable machine learning model for predicting the safety of food for 1 human consumption is a significant challenge for policymakers and responsible authorities. This 2 study provides a step-by-step guide to predict the results of seafood product import inspections, 3 focusing on identifying and understanding the critical factors that influence these results. By compar- 4 ing the performances of an ensemble of machine learning models, this study combines the strengths 5 of multiple algorithms to improve the predictive accuracy and gain insights into the key factors 6 impacting them. The ensemble model based on the soft voting technique achieves superior perfor- 7 mance to that based on the hard voting technique in terms of the recall and area under the curve 8 (AUC) scores. The study discovered that various characteristics, such as the exporting country ratio, 9 major product category, overseas manufacturer ratio, importer ratio, and seasonal variation, had a 10 substantial influence on the models’ decisions. This research guide for predicting seafood product 11 import inspection results could pave the path for other items to follow.

Power grid fault diagnosis technology has been widely used at home and abroad. With the access of distributed power sources and diversified loads, the distribution network has changed from a passive network to an active network, and the current has changed from "one-way" to "two-way". The structure of distribution network, equipment environment and operating conditions are becoming more and more complex, and the fault diagnosis and localization of active distribution network is becoming more and more difficult. With the rapid development of artificial intelligence, power grid fault diagnosis based on intelligence is unprecedented. This paper introduces the research status of distributed photovoltaic grid-connected fault diagnosis technology, and expounds the history of fault diagnosis technology, which mainly includes expert system, artificial neural network, Bayesian network, fuzzy set theory, rough set theory, Petri net analytical model and multi-source information fusion, etc. The applicability and characteristics of these diagnoses are described, and the existing defects and the overall direction of improvement are briefly described Finally, the key technical problems and future directions in the field of power system fault diagnosis are pointed out by combining theory with practice, so as to promote the further development of this field.

Structural magnetic resonance imaging (sMRI) is widely used in the clinical diagnosis of diseases due to its advantages: high definition and noninvasive. Therefore, computer-aided diagnosis based on sMRI images is broadly applied in classifying Alzheimer’s disease (AD). Due to the excellent performance of Transformer in computer vision, Vision Transformer (ViT) has been employed for AD classification in recent years. ViT relies on access to large datasets, while the sample size of brain imaging datasets is relatively insufficient. Moreover, the pre-processing procedures of brain sMRI images are complex and labor-intensive. To overcome the limitations mentioned above, we propose Resizer Swin Transformer (RST), a deep learning model that can extract information from brain sMRI images that are only briefly processed to achieve multi-scale and cross-channel features. In addition, we pre-trained our RST on a natural image dataset and obtained better performance. The experimental results of ADNI and AIBL datasets prove that RST can achieve better classification performance in AD prediction compared with CNN-based and Transformer models.

Dryland winter wheat in Loess Plateau is facing yield reduction due to shortage of soil moisture and delayed sowing time. Field experiment was conducted at Loess Plateau in Shanxi Province, China from 2012 to 2014, to study the effect of subsoiling and conventional tillage and different sowing dates on the soil water storage and contribution of N accumulation and remobilization to yield of winter wheat. The results showed that subsoiling significantly improved the soil water storage at 0-300 cm depth, improved the number of tillers and pre-anthesis N translocation in various organs of wheat and post-anthesis N accumulation, eventually increased the yield up to 17-36%. Delaying sowing time had reduced the soil water storage at sowing and winter accumulated temperature by about 180˚C. The contribution of N translocation to grain yield was maximum in glume+spike followed by in leaves and minimum by stem+sheath. In addition a close relationship was found between the N accumulation and translocation and the soil moisture in the 20-300 cm. Subsoiling during the fallow period and the medium sowing date was beneficial for improving the soil water storage and increased the N translocation to grain, thereby increasing the yield of wheat, especially in dry year.

In order to assess the range of impact of thermal wastewater discharge from the third Nuclear Power Plant (NP_No.3) on the local ecosystem, a three-dimensional ocean model (MITgcm) driven by tidal and climatological forcings is employed to study the present work. Tides and daily wind forcings are incorporated into the MITgcm model to examine their effects on the thermal plume and the water circulation in Nan Wan Bay. The model results reveal that the thermal plume is most likely to disperse to the southwest in summer; it is unlikely to drift to the southeast or northeast because of the presence of gentle southwesterly monsoon. In winter, the thermal plume is most likely to be directed to the southwest but barely visible in the northeast or southeast directions because of prevailing northeasterly monsoon. Additionally, it is worth emphasizing that strong tidal currents generate a pair of counter-rotating eddies that significantly dominate the dispersal of the thermal plume. However, seasonal monsoons also play an essential role in modifying the plume’s direction and dispersion. The model results reveal that the flow field and thermal plume agree well with observational data.

Text CAPTCHAs are crucial security measures employed on global websites to deter unauthorized intrusions. The presence of anti-attack features incorporated into text CAPTCHAs limits the effectiveness of breaking them, despite CAPTCHA recognition being an effective method for assessing their security. This study introduces a novel color augmentation technique called Variational Color Shift (VCS) to boost the recognition accuracy of different networks. VCS generates a color shift range of every input image and then resamples the image within that range to generate a new image, thus expanding the number of samples of the original dataset to improve training effectiveness. In contrast to Random Color Shift (RCS) which treats the color offsets as hyperparameters, VCS uses the estimated offsets to reparametrize the points sampling from the unit uniform distribution to reconstruct new image pixels, which makes the offsets learnable. To reduce the computational effort of VCS, we also propose two variants of VCS: Sim-VCS and Dilated-VCS. In addition, to solve the overfitting problem caused by many disturbances in CAPTCHAs, we propose an Auto Encoder (AE) based on a Large Separable Kernel Attention (AE-LSKA) to replace the convolutional module in the text CAPTCHA recognizer. This new module employs an AE) to compress the interference while expanding the receptive field using Large Separable Kernel Attention (LSKA), which reduces the impact of local interference on the model training and improves the overall perception of characters. The experimental results show that the recognition rate of the model after integrating the AE-LSKA module is improved by at least 15 percentage points on both M-CAPTCHA and P-CAPTCHA datasets. In addition, experimental results demonstrate that color augmentation using VCS is more effective in enhancing recognition.

Climate change poses a serious threat to the ancient Magnoliaceae family, particularly for the endangered Yulania trees. Until now, little is known about the suitable geographical range of Yulania zenii, and about how it responds to past and future climate scenarios. Here, we first employed ten models from Biomod2 to preliminarily simulate its potential distribution in China and selected MaxEnt for final modeling. The results showed that among the key environmental factors influencing its distribution, the top three factors were Bio2 (Mean diurnal range), Bio15 (Precipitation seasonality of variation coefficient) and Elevation. Its current suitable distribution were primarily concentrated in southern Anhui, central Hubei, eastern Hunan, southern Jiangsu, northern Jiangxi, and northern Zhejiang. The total suitable area of Yulania zenii was 14.68 × 104 km2, only taking 1.53% of China's total territory, which is larger than known. During the Last Interglacial and Middle Holocene, its suitable habitats were larger than currently, exhibiting a relatively continuous distribution. Under various future climate scenarios, its suitable habitats may averagely decrease by 20.26% compared with the current, and these habitats become more fragmented. Collectively, the centroid of Yulania zenii is expected to migrate towards the southeast in the future. Therefore, our findings demonstrate, for the first time, that climate change takes an adverse effect on this species in distribution from the past to current till future. Our study can contribute to the conservation and management of Yulania zenii in China, and can provide reference for other endangered Yulania species of this country under the condition of climate change.

Metabolic-associated fatty liver disease (MAFLD) and diabetic kidney disease (DKD) share various pathophysiological factors, and epidemiological evidence suggests that these two diseases are associated. Albuminuria and the estimated glomerular filtration rate, which are conventional biomarkers of DKD, are reportedly associated with the risk or severity of MAFLD. Recently, novel DKD biomarkers reflecting renal tubular injury have been introduced to complement conventional DKD markers. In this article, we looked at previous studies that showed an association between MAFLD and DKD and also reviewed the significance of DKD biomarkers as predictive risk factors for MAFLD.

To present surgical methods and outcomes of neobladder-vaginal fistula (NVF) repair after radical cystectomy (RC) with ileal orthotopic neobladder (IONB). Methods: We retrospectively reviewed 136 women who underwent RC with IONB for bladder cancer between January 2010 and December 2018. The NVF was confirmed by cystoscopy and/or voiding cystography. NVF repair was performed using a transvaginal approach, which included circumferential incision of the fistula tract, creation of a plane between the neobladder serosa and the vaginal epithelium, and multi-layered transvaginal closure. Results: During a median follow-up of 47.9 months, NVF was identified in 12 (8.8%) women. Eight fistulas were located in the proximal anterior vaginal wall and four in the vaginal apex. Median time from RC to NVF repair was 3.4 months. Median NVF size and duration of urethral Foley catheter indwelling was 6.0 mm and 24.0 days, respectively. Initial repair of NVF was successful in ten (83.3%) patients. Two (16.7%) patients who relapsed retained IONB through the subsequent operation. Two (16.7%) patients developed urinary incontinence after NVF repair, requiring anti-incontinence surgery. Conclusions: The transvaginal approach for NVF repair is feasible, yielding successful surgical outcomes. However, women should be counseled about the risks of relapse and urinary incontinence.

Background: In long-term care facilities, there are many residents who do not have the ability to seek shelter by themselves in the case of an emergency. Thus, it is extremely important that the staff of nursing homes are equipped with correct disaster prevention concepts, emergency survival responses, and hazard mitigation measures. Purpose: Discuss the intervention effectiveness of different fire prevention and emergency response trainings at nursing homes and the relationship and predictivity of awareness to self-efficacy. Method: Recruit staff from two nursing homes through purposive sampling, using a two-team pre-and post-test design to collect results from 41 individuals in the experiment group and 40 individuals in the control group. The research tool is the “Nursing Home Fire Prevention and Emergency Response Awareness and Self-Efficacy Scale,” to compare the effectiveness of advanced and general fire safety trainings. Result: After receiving improved advanced fire safety training, the total score and the result of the experiment group on fire prevention and emergency response awareness and self-efficacy had both performed better than the control group who received general fire safety training (p < .001); fire prevention and emergency response awareness has significant and positive correlation with self-efficacy (r=.601, p < .001), and awareness is a significant predictor variable to self-efficacy (p < .001). Conclusion/Practical Application: This study finds that the key to improving learning effectiveness includes adding fire science concept chapter when creating fire safety training material in order to strengthen basic awareness; fire safety training should comprehensively introduce all related duty responsibilities of staff fire defense formation, in turn enabling mutual responsive support for the needs of the site; also, to become familiarized with the knowledge requires appropriate frequency of training and enhancing the staff’s awareness to fire prevention and emergency response, which is the most important key of learning effectiveness.

Plant Cysteine Oxidase (PCO) is a plant O2-sensing enzyme of catalyzing oxidation of cysteine to Cys-sulfinic acid at the N-termini of target proteins. To better understand the Brassica napus PCO gene family, PCO genes in B. napus and related species were analyzed. In this study, 20, 7 and 8 PCO genes were identified in Brassica napus, Brassica rapa and Brassica oleracea, respectively. According to phylogenetic analysis, the PCOs were divided into five groups: PCO1, PCO2, PCO3, PCO4 and PCO5. Gene organization and motif distribution analysis suggested that PCO gene family was relatively conserved during evolution. Expression analysis showed that PCO genes were expressed in different tissues at different developmental stages. Interestingly, most of the Bna/Br/BoPCO5 members were expressed in leaves, roots, flowers, buds and siliques, suggesting an important role in both vegetative and reproductive development. Expression of BnaPCO was induced by various abiotic stress, especially waterlogging stress, which was consistent with the result of cis-element analysis. In this study, the PCO gene family of Brassicaceae was analyzed for the first time, which contributes to a comprehensive understanding of the origin and evolution of PCO genes in Brassicaceae and the function of BnaPCO in regulating plant responses to abiotic stresses.

Tremor is a prevalent neurological disorder characterized by involuntary shaking or trembling of body parts. This condition impairs fine motor skills and hand coordination to varying degrees and can even affect overall body mobility. As a result, tremors severely disrupt the daily lives and work of those affected, significantly limiting their physical activity space. This study developed an innovative Spatial Augmented Reality (SAR) system aimed at assisting individuals with tremor disorders to overcome their physical limitations and expand their range of activities. The system integrates eye-tracking and Internet of Things (IoT) technologies, enabling users to smoothly control objects in the real world through eye movements. It employs a virtual stabilization algorithm for stable interaction with objects in the real environment. The study comprehensively evaluated the system's performance through three experiments: 1) assessing the effectiveness of the virtual stabilization algorithm in enhancing the system's ability to assist individuals with tremors in stable and efficient interaction with remote objects; 2) evaluating the system's fluidity and stability in performing complex interactive tasks; 3) investigating the precision and efficiency of the system in remote interactions within complex physical environments. The results demonstrate that the system significantly improves the stability and efficiency of interactions between individuals with tremor and remote objects, reduces operational errors, and enhances the accuracy and communication efficiency of interactions.

Silicon anodes have been considered one of the most promising anode candidates for the next generation of high-energy density lithium-ion batteries due to the high theoretical specific capacity (4200 mAh g-1) of Si. However, high lithiation capacity endows silicon anodes with severe volume expansion effects during the charge/discharge cycling. The repeated volume expansions not only lead to the pulverization of silicon particles and the separation of electrode materials from the current collector, but also brings rupture/formation of solid electrolyte interface (SEI) and also continuous electrolyte consumption, which seriously hinders the commercial application of silicon anodes. Structural design and optimization is the key to improving the electrochemical performances of silicon anodes, which has attracted wide attention and research in recent years. This paper mainly summarizes and compares the latest research progress for the structural design and optimization of silicon anodes.

Granulomatosis with polyangiitis (GPA) is an autoimmune disease which is a type of anti-neutrophil cytoplasmic antibody (ANCA)-associated vasculitis that frequently affects the lungs and kidneys. However, GPA limited to a single organ has also been reported. A 73-year-old man was admitted for back pain and fever. We detected elevated levels of inflammatory markers and myeloperoxidase-ANCA. Magnetic resonance imaging indicated diffuse inflammation of the back and psoas muscles. Histology showed degenerated muscle fibers and granulomatosis vasculitis with mixed lymphoplasma cell infiltration. High-dose methylprednisolone therapy improved his symptoms. A final diagnosis of GPA limited to the muscles was made.

Keywords: Kenaf; liquid cultivation; solid cultivation; in vitro propagation, life on land

This research analyses extreme precipitation events in the Huaihe River Basin in China, a densely populated region with a history of human settlements and agricultural activities. This study aims to explore the impact of extreme precipitation index changes and provide decision-making suggestions for flood early warning and agricultural development in the Huaihe River Basin. The study utilises the NEX-GDDP-CMIP6 climate models dataset and the daily value dataset (V3.0) from China's national surface weather stations to investigate temporal and spatial changes in extreme precipitation indices from 1960 to 2014 and future projections. At the same time, this study adopted the RclimDex model, Taylor diagram and Sen+Mann-Kendall trend analysis research methods to analyse the data. The results reveal a slight increase in extreme precipitation indices from northwest to southeast within the basin, except for CDD, which shows a decreasing trend. Regarding spatial, the future increase of extreme precipitation in the Huaihe River Basin will show a spatial variation characteristic that decreases from northwest to southeast. These findings suggest that extreme precipitation events are intensifying in the region. Understanding these trends and their implications is vital for adaptation strategy planning and mitigating the risks associated with extreme precipitation events in the Huaihe River Basin.

Red mud (RM), a bauxite residue, contains hazardous radioactive wastes and alkaline material and poses severe surface water and groundwater contamination risks, necessitating recycling. Pretreated RM can be used to make adsorbents for water treatment. However, its performance is affected by many factors, resulting in a nonlinear correlation and coupling relationship. This study aimed to identify the best formula for an RM adsorbent using a mathematical model that examines the relationship between 11 formulation types (e.g., pore-assisting agent, component modifier, and external binder) and nine properties (e.g., specific surface area, wetting angle, and Zeta potential, among others). This model was built using a back-propagation neural networks(BP) based on single-factor experimental data and orthogonal test data. The model trained and predicted the established network structure to obtain the optimal adsorbent formula. The RM particle adsorbents had a pH of 10.16, specific surface area(BET) of 48.92 m2·g−1, pore volume of 2.10 cm3·g−1, compressive strength(ST)) of 1.12 KPa, and 24-h immersion pulverization rate(η_m) of 3.72%. In the removal of total phosphorus in flotation tailings backwater, it exhibited a good adsorption capacity (Q)and total phosphorous removal rate(η) of 48.63 mg·g−1 and 95.13%, respectively.

The phenomenon of ordered self-assembly on solid substrates is a topic of interest in both fundamental surface science research and its applications in nanotechnology. The regulation and control of two-dimensional (2D) self-assembled supra-molecular structures on surfaces have been realized through applying external stimuli. By utilizing scanning tunneling microscopy (STM), researchers can investigate detailed phase transition process about self-assembled monolayers (SAMs), providing insight into the interplay between intermolecular weak interactions and substrate-molecule interactions, which govern the formation of molecular self-assembly. This review will discuss the structural transition of self-assembly probed by STM in response to external stimuli and provide state-of-art methods such as tip induced confinement for the alignment of SAM domains and selective chirality. Finally, we discuss the challenges and opportunities in the field of self-assembly and STM.

Rail impedance directly affects the transmission performance of track circuit . Considering the condition of earth stratification, for the difficult to calculate the rail impedance due to the semi-infinite integration interval and the oscillation of the integrand by using the Carson formula, The truncation method is proposed to divide the impedance formula is divided into definite integral and tail integral. The integral is approximated by the spline function, and the tail integral is calculated by using the exponential integral and Euler formula. Based on it, the rail impedance calculation formula of track circuit is obtained. The electromagnetic field model of track circuit with earth stratification is simulated by finite element method, and the correctness of the method is verified. Based on the formula, the influence of current frequency, soil depth and conductivity on rail impedance is studied. The relative error between the calculated results of rail impedance and the simulation results of finite element is within 5%. It can be seen that the formula has high accuracy and correctly reflects the law of rail impedance variation with current frequency, soil depth and resistivity. It provides a reliable reference for the theoretical calculation of rail impedance of track circuit.

Acid-producing bacteria in pit mud play a crucial role in the fermentation of Chinese liquor, significantly influencing its flavor, taste, and overall quality. This study investigates three strains of anaerobic acid-producing bacteria from pit mud to optimize both single and combined bacterial fermentations for enhanced acid production. Acid production levels were quantitatively measured using gas chromatography-mass spectrometry. The Design Expert software was employed to identify significant nutritional factors affecting the production of hexanoic and butyric acids. These factors were optimized through climbing tests and response surface analysis. The Box-Behnken Design (BBD) experimental design and variance analysis were used to determine the optimal levels of each significant factor. The SJ-1/SJ-3/SJ-8/enriched solution exhibited the highest acid production, with a total acid production of 2216.07±0.10 mg/100 ml. The yields of caproic acid and butyric acid were 801.94±0.11 mg/100 ml and 1167.33±0.14 mg/100 ml, respectively. The optimized fermentation medium for caproic and butyric acid production consisted of 5.1 g/L peptone, 5.04 g/L sodium acetate, and 4.45 g/L sodium butyrate, with a pH of 6.4. Under these conditions, the production of caproic acid and butyric acid reached 1172.73 mg/100 ml and 2382.45 mg/100 ml, respectively. These values represent significant increases (P<0.05) of approximately 46.24% for caproic acid and 104.09% for butyric acid compared to initial levels. The model predicts caproic and butyric acid production to be 1184.21 mg/100 ml and 2387.84 mg/100 ml, respectively, which closely aligns with experimental results. This indicates the model’s effectiveness and provides valuable insights for enhancing acidity in liquor production.

It is difficult to effectively operate a dual-arm robot using only the information written in a cooking recipe. To cope with this problem, this paper proposes a graph based approach on bimanual cooking motion planning from a cooking recipe. In our approach, we first decompose the cooking recipe into graph elements. Then, we try to connect the graph elements taking into account the attributes of the input/output nodes. If two graph elements cannot be connected each other, we search for a graph element that can be inserted between them from the database of graph elements. Since the constructed graph includes the whole sequence of the robot’s motions to perform the cooking task, we can generate a task sequence of a dual-arm manipulator simultaneously performing two different tasks by using two arms. Through experimental study, we show that it is possible to generate robot motions from a cooking recipe and perform the cooking motions while simultaneously moving the left and right arms.

The study of man-land relationship in urbanization process is the current frontier and focus of international research. How to balance urban development and ecosystem conservation in the Upper Yellow River is a key issue for sustainable development in China. In this study, we evaluated the Lanzhou-Xining urban agglomeration （LXUA）by constructing a multi-dimensional assessment system for urbanization quality and ecosystem services. The efficacy function model, entropy weight method, and Integrated Valuation of Ecosystem Services and Tradeoffs (InVEST) model were used to quantitatively assess the subsystems' state of development. Then, the coupling model (CD) and the coordination degree（CCD）model were used to explore the coupling coordination relationship and spatial-temporal change characteristics of the composite system. The findings indicate that: 1）In 2020, the quality of urbanization in LXUA showed the pattern of "double core". The development of urban centers in each city is insufficient, and the proportion of counties with low-level is too high. 2）Integrated ecosystem services showed an increasing distribution pattern from the northeast to the southwest. Water provision services, soil conservation services and carbon fixation services all showed growth trends. 3）Each county’s composite system was in the run-in stage or highly coupled stage. The subsystems were closely related to each other. 4）The CCD was decreased by 6% between two decades. The number of counties on the verge of disorder was the highest. About 80% of the counties are relatively lagging behind in ecosystem services.

Globally,coastal regions are vital areas of human activities and, as such, are centres of population growth and urban and economic development. Long-term human development has had a major impact on the ecological environment of coastal zones. Therefore, exploring the distribution and provenance of marine sediment types in coastal areas heavily influenced by human activities can provide scientific evidence and references for the current and future ecological management of these sensitive environments. For this reason, we have conducted an analysis on the sediment grain size, Endmember, organic matter content and geochemical elements in the Lu’erhuan River‒Malan Island‒Sandun Island area in the eastern part of Qinzhou Bay, a region heavily influenced by human activities. Sediment grain size clearly differs throughout the study site and the material provenances and hydrodynamic conditions are also varied, likely due to the local environmental conditions and the significant impact human activities have had on the area. The finest-grained sediment is imported from either inland or coastal areas via rivers and weak tidal currents, the next finest component is input from coastal areas through weak tidal currents, and the moderately coarse component mainly originates from nearby beaches. The two coarsest-grained sediment components are influenced by the combination of human activities, tidal currents and waves and enter the water via erosion. Organic matter provenance resembles that of the sediment components, exhibiting varied characteristics. This is due to the combination of natural and human activities in the bay. The organic matter in the upper reaches of the Lu’erhuan River originates from the river and coastal paddy fields, with obvious terrigenous characteristics; the organic matter in northern Malan Island mainly comes from external sources related to oyster farming; while organic matter in eastern Sandun Island is mainly produced endogenously by marine plankton. Al, Ti, Fe, Mg, K, Ga and other elements indicate that terrestrial sediments are significantly disturbed by human activities. However，Mn reflects the marine distribution of terrestrial sediments from the Lu’erhuan River to Jishuimen. Ca and Sr, indicators of marine sediments, are distributed in the eastern offshore area of Sandun Island, which is connected to the open waters. Due to the influence of human activities, As and Cd are highly enriched in the study area, while Cu is less affected by human activities.

ABSTRACT Introduction: Traditional penile venous surgery and enhancement have been controversial. Based on De Novo penile fibrovascular assembly, we report on penile venous stripping (PVS) and factual penile girth enhancement (FPGE). Methods: From 2013 to 2023, 18 men underwent PVS and FPGE, all confirmed with veno-occlusive dysfunction (VOD). PVS involves the stripping of erection-related veins. FPGE was performed along the tunica albuginea bilaterally; then, the two tunic defects were repaired with a 70.0x30.0 mm venous stripe and covered with either autologous venous walls (AVW, n=10) or Surgiform (SF, n=8). The penile girth was measured, and radio-opaque contrast was used. The abridged 5-item version of the International Index of Erectile Function (IIEF-5) score and the Erection Hardness Scale (EHS) were used yearly during follow-up via the Internet. Results: The follow-up period was 5.3±1.5 years. Radiopacity was consistently enhanced. Although there was indifference between AVW and SF, there was a significant improvement (both P＜0.01) in IIEF-5 and EHS scores (9.7±2.8 vs. 20.8±2.3; 1.7±0.6 vs. 3.2±0.2, respectively). Both the diameters of the glans and penile shaft increased (28.0±2.3mm and 28.3±2.1mm vs 35.3±2.2mm and 36.3±2.1mm respectively). The satisfaction rate was 81.3% (13/16). Conclusions: This novel combination of PVS and FPGE is promising, although a larger sample size is needed for further validation.

Initial water content significantly affects the efficiency of soil stabilization. In this study, the effects of initial water content on the compressibility, strength, microstructure and composition of a lean clay soil stabilized by compound calcium-based stabilizer were investigated by static compaction test, unconfined compression test, optical microscope observations, environment scanning electron microscopy, energy dispersive X-ray spectroscopy and X-ray diffraction spectroscopy. The results indicate that as the initial water content increases in the range studied, both the compaction energy and the maximum compaction force decrease linearly and there are less soil aggregates or agglomerations, and smaller proportion of large pores in the compacted mixture structure. In addition, for specimens cured with or without external water supply and under different compaction degrees, the variation law of the unconfined compressive strength with initial water content is different and the highest strength value is obtained at various initial water contents. With the increase of initial water content, the percentage of oxygen element tends to increase in the reaction products of the calcium-based stabilizer, whereas the crystalline mineral of the soil did not change obviously.

Taking a certain type of test centrifuge as the research object, the finite element model of the test centrifuge is established, the vibration characteristics and aerodynamic performance of the test centrifuge are analyzed, and the structural optimization design of the test centrifuge is carried out. In this paper, the load is applied according to the actual working condition of a certain type of test centrifuge. The vibration of the mounting seat of the test centrifuge is analyzed and the structure of the mounting seat is optimized. After optimization, the vibration of the mounting seat is 77.38 % lower than that of the original mounting seat. Then, the aerodynamic analysis of the test centrifuge is carried out. The analysis results show that the test centrifuge moves more smoothly under the whole package shell and the steady flow shell, and the resistance decreases and the shaft load decreases. Finally, the steady flow shell of the test centrifuge is optimized. The analysis shows that the increase of the width of the steady flow shell can reduce the resistance coefficient, which is helpful to the stability of the test centrifuge during operation and reduces the unbalanced response of the system caused by air resistance.

Edible coating gels developed from the Aloe vera plant have been used as a traditional medicine for about 3000 years. Aloe vera contains 110 potentially active constituents from six different classes: chromone and its glycoside derivatives; anthraquinone and its glycoside derivatives; flavonoids; phenylpropanoids and coumarins; phenylpyrone and phenol derivatives; and phytosterols and others. Apart from medicinal uses, Aloe gels have an important role in food preservation as edible coatings. They provide an edible barrier for atmospheric gases and moisture, and help to reduce the respiration and transpiration of fresh produce, which helps to preserve its postharvest quality. To date, numerous studies have been conducted on the postharvest use of Aloe vera gel. The present review article summarizes and discusses existing available information about the chemical constituents, antimicrobial activity, and food preservative characteristics of Aloe vera.

As the number of end-of-life vehicles continues to grow, the field of separation technology for broken copper and aluminium parts of end-of-life vehicles has emerged as a significant area of research. As a key technology for the separation of non-magnetic non-ferrous metals, such as copper and aluminium, eddy current separation can achieve efficient separation of non-magnetic non-ferrous metals according to their differing conductivity and density. Nevertheless, further research is required in the separation of large-scale broken copper and aluminium parts of end-of-life vehicles. This paper presents a novel magnetic roller model comprising circumferential and axial periodic arrangements of permanent magnets. A single permanent magnet was constructed as an equivalent current model, and the magnetic scalar potential equations were solved using simulation tools. This allowed the distribution of the magnetic field outside the magnetic roller to be studied. The results demonstrate that the novel permanent magnet array magnetic roller can enhance the magnetic field intensity and action distance of the external magnetic field, which is more conducive to the separation of large-scale broken copper and aluminium parts of scrap cars. The findings of this research provide a theoretical foundation for the separation of scrap car broken copper and aluminium parts.

Diffuse cavernous hemangioma of the rectum (DCHR) is a rare benign lesion of vascular malformation. According to previous studies, the most reported major symptoms of DCHR are recurrent painless rectal bleeding or iron deficiency anemia[1][2][3][4][5][6]. We present a case of an 8Y11M boy who was diagnosed with DCHR by MRI. The patient underwent Laparoscopic-assisted transanal distal sigmoidectomy and sigmoido-anal anastomosis（Laparoscopic Swenson Procedure）, and recovered well. After the operation, the child had short-term fecal incontinence and loose stools, which returned to normal after half a year. Regardless of age and symptoms, early and correct diagnosis and treatment of DCHR and postoperative restoration of normal anal function are necessary. Laparoscopic Swenson procedure may be a good option for the treatment of DCHR.

Quantum coherence is an important physical resource in quantum information science, and also as one of the most fundamental and striking features in quantum physics. In this paper, we obtain a symmetry-like relation of relative entropy measure $C_r(\rho)$ of coherence for $n$-partite quantum states $\rho$, which gives lower and upper bounds for $C_r(\rho)$. Meanwhile, we discuss the conjecture about the validity of the inequality $C_r(\rho)\leq C_{\ell_1}(\rho)$ for any state $\rho$. We observe that every mixture $\eta$ of a state $\rho$ satisfying $C_r(\rho)\leq C_{\ell_1}(\rho)$ and any incoherent state $\sigma$ also satisfies the conjecture. We also note that if the von Neumann entropy is defined by the natural logarithm $\ln$ instead of $\log_2$, then the reduced relative entropy measure of coherence $\bar{C}_r(\rho)=-\rho_{\rm{diag}}\ln \rho_{\rm{diag}}+\rho\ln \rho$ satisfies the inequality ${\bar{C}}_r(\rho)\leq C_{\ell_1}(\rho)$ for any mixed state $\rho$.

Celtis sinensis is an adaptable species that is widely grown in southern China. In June 2022, a leaf blotch disease of C. sinensis was observed in Nanjing, Jiangsu, China. Based on morphological characterization, three isolates were identified as Alternaria species. Phylogenetic analysis of combined ITS, GAPDH, TEF1-α, RPB2 and Alt a 1 sequences identified the three isolates we obtained as Alternaria alternata and Alternaria koreana. Koch’s postulates were fulfilled in the greenhouse, and the pathogenicity of A. alternata and A. koreana was determined by leaf inoculation tests on C. sinensis seedlings. The symptoms of indoor inoculation were consistent with those in the field. A. alternata and A. koreana can grow at 15-35 °C, with an optimal growth temperature of 25 °C. The results of fungicide sensitivity experiments indicated that A. alternata and A. koreana were the most sensitive to prochloraz, which may be a useful strategy for the future prevention and control management of A. alternata and A. koreana. This study provides the first step for further research on A. alternata and A. koreana as pathogens of C. sinensis and provides a theoretical basis for future control strategies.

The bionic polarization imaging navigation sensor (BPINS) is a navigation sensor that provides absolute heading, and it is of practical engineering significance to model the measurement error of BPINS. The existing BPINSs are still modeled using photodiode-based measurements rather than imaging measurements and are not modeled systematically enough. This paper proposes a measurement model of BPINS that takes into account the geometric and polarization errors of the optical system. Firstly, the key error factors affecting the measurement accuracy of BPINS are systematically investigated and the Stokes vector-based measurement error model of BPINS is established. Secondly, based on its measurement error model, the effect of the error source on the measurement performance of BPINS is quantitatively analyzed by using Rayleigh scattering to generate scattered sunlight as a known incident light source. The experimental results show that the coordinate deviation of the principal point has a greater impact, followed by grayscale response inconsistency of CMOS and integration angle error of micro-polarization array, and finally lens attenuation. This finding can guide the subsequent calibration of BPINS, and the quantitative results provide an important reference for its optimal design.

The annual construction and demolition waste (CDW) generated from EU construction sector was 850 million tons, which represented 31% of the total waste generation and about 28% of CDW was ceramics (bricks and tiles). In this study, the feasibility of using CDW brick powder as the precursor of alkali activated mortar (AAM) and extruded polystyrene (XPS) as the lightweight aggregates to form lightweight brick powder AAM (LW-BP-AAM) for non-structural applications was investigated. The thermal conductivity of LP-BPAAM was 0.112 W/m·K with density of about 1,135 kg/m³ which was lower than the counterparts with similar density in literature. The acid resistance of LW-BP-AAM is comparable to conventional fly ash based AAM and superior than ordinary Portland cement. From the scanning electron microscopy with energy dispersive X-ray spectroscopy, there was no severe damage on the surface of LW-BP-AAM but aluminate was removed from the matrix which was further verified in Fourier transform infrared spectroscopy. The mass and strength loss of LP-BP-AAM was 1.5% and 33%, respectively. Although the compressive strength of the LP-BP-AAM was low (about 1.8 MPa), it can be improved by optimising the particle size of the XPS aggregates.

Microalgae and their bioproducts hold significant potential across various applications, for instance, in wastewater remediation, CO2 fixation, and the synthesis of nutraceuticals, pharmaceuticals, and biofuels. The production of these organisms heavily relies upon environmental conditions, including factors like temperature, light, and nutrient supply, which can significantly impact growth. Furthermore, the limitations in nutrients or certain extreme environments can result in productivity increases. As such, microalgae growth systems have become a critical consideration for both research and industry. Both open and closed systems, such as raceway ponds and photobioreactors, respectively, have their own advantages and drawbacks in microalgae cultivation. However, for microalgae growth, photobioreactors may address most concerns, as the system has a lower risk of contamination and can deliver specific growth factors in a controlled manner. This review will summarize the growth and incubation factors of microalgae and the uses of bioreactors in both research and industrial capacities.

Zearalenone is one of the most prevalent estrogenic mycotoxins produced mainly by Fusarium family fungi, and harmed the heath of animals. Zearalenone hydrolase is an important enzyme capable of degrading zearalenone into a non-toxic compound. Although previous research has investigated the catalytic mechanism of zearalenone hydrolase, information on its dynamic interaction with zearalenone remains unknown. This study aimed to develop a pipeline for identifying the allosteric pathway of zearalenone hydrolase. Using an identity analysis, we identified hub genes whose sequences can generalize a set of sequences in a protein family. We then utilized a neural relational inference (NRI) model to identify the allosteric pathway of the protein throughout the entire molecular dynamics simulation. The production run lasted 1 microsecond, and we analyzed residues 139-222 for the allosteric pathway using the NRI model. We found that the cap domain of the protein opened up during catalysis, resembling a hemostatic tape. We used umbrella sampling to simulate the dynamic docking phase of the ligand-protein complex and found that the protein took on a square sandwich shape. Our energy analysis using both MMPBSA and PMF analysis showed discrepancies, with scores of -8.45 kcal/mol and -1.95 kcal/mol, respectively. MMPBSA, however, obtained a similar score to that of a previous report.

Mobile inspections conducted by intelligent tunnel robots are instrumental in broadening the inspection reach, economizing on inspection expenditures, and augmenting the operational efficiency of inspections. Despite differences from fixed surveillance, mobile-captured traffic videos have complex backgrounds and device conditions that interfere with accurate traffic event identification, warranting more research. This paper proposes an improved algorithm based on YOLOv9 and DeepSORT for intelligent event detection in edge computing mobile device using the intelligent tunnel robot. The enhancements comprise the integration of the Temporal Shift Module to boost temporal feature recognition and the establishment of logical rules for identifying diverse traffic incidents in mobile video imagery. Experimental results show that our fused algorithm achieves a 93.25% accuracy rate, an inprovement of 1.75% over the baseline. The algorithm is also applicable to inspection vehicles, drones, and autonomous vehicles, effectively enhancing the detection of traffic events and improving traffic safety.

Infrared small target detection (ISTD) plays a crucial role in both civilian and military applications. The detection of small targets against dense cluttered backgrounds remains a challenging task, requiring the collaboration of false alarm source elimination and target detection. Existing approaches primarily focus on modeling targets while often neglecting false alarm sources. To address this limitation, we propose a Target and False Alarm Collaborative Detection Network to leverage the information provided by false alarm sources and the background. Firstly, we introduce a False Alarm Source Estimation Block (FEB) that estimates potential interferences present in the background by extracting features on multiple scales and employing stepwise upsampling for feature fusion. Subsequently, we propose a framework that employs multiple FEBs to eliminate false alarm sources across multiple scales. Finally, a Target Segmentation Block (TSB) is introduced to accurately segment the targets to produce the final detection result. Experiments on public datasets demonstrate that, compared to other methods, our model achieves high accuracy in segmenting targets while being able to extract false alarm sources which can be used for further studies.

We fabricated high-quality MAPbBr3 single crystals (SC) by introducing moderate amount electron-rich poly(propylene glycol bis(2-aminopropyl ether) (PEA) additives with an inverse temperature crystallization (ITC) method. The intramolecular vibrations and defective states of prepared MAPbBr3 single crystals were systemically studied by the in situ variable-temperature Fourier Transform Infrared (FTIR) Spectroscopy, X-ray photoelectron spectroscopy (XPS), and the synchrotron-based X-ray absorption near edge structure (XANES), et al. We infer that the proper amount of PEA additives would prevent the formation of intermediate states and crystal boundaries, passivating the density of defective states. The X-ray detection properties of single-crystal MAPbBr3 crystals were investigated, using both high dose and low dose X-ray photons at 40keV in synchrotron beamlines. The photocurrent of optimized PEA-treated MAPbBr3 single crystals demonstrate better performance compared with the as-prepared single crystals. Meanwhile, the decay time of MAPbBr3 single crystal is decreased from 460 ns to 210 ns by Time-resolved photoluminescence (TRPL) decay measurement, owing to the defect passivation by 0.5wt% PEA additives. The PEA-treated single crystals possess much faster decay time than the commercialized Ce:YAG scintillator (>500ns). These results help elucidate the passivation of defective states and contribute paths to manufacture high-quality single crystal perovskites for next-generation optoelectronic devices.

Bone drilling is a common procedure used to create pilot holes for inserting screws to secure implants for fracture fixation. However, dis process can increase bone temperature, teh excessive heat can lead to cell death and thermal osteonecrosis, potentially causing early fixation failure or complications. We conducted a three-dimensional dynamic elastoplastic finite element model to evaluate teh propagation and distribution of heat during bone drilling and assess teh thermally TEMPeffected zone (TAZ) dat may lead to thermal necrosis. dis model investigates teh parameters influencing bone temperature during bone drilling, including drill diameter, rotational speed, feed force, and predrilled hole. Teh results indicate dat our FE model is sufficiently accurate in predicting teh temperature rise TEMPeffect during bone drilling. Teh maximum temperature decreases exponentially wif radial distance. When teh feed forces are 40 and 60 N, teh maximum temperature does not exceed 45 °C. However, wif feed forces of 10 and 20 N, both teh maximum temperature exceeds 45 °C wifin a radial distance of 0.2 mm, indicating a high-risk zone for potential thermal osteonecrosis. Wif teh two-stage drilling procedure, where a 2.5 mm pilot hole is pre-drilled, teh maximum temperature can be reduced by 14 °C. dis suggests dat higher feed force and rotational speed and/or using a two-stage drilling process could mitigate bone temperature elevation and reduce teh risk of thermal osteonecrosis during bone drilling.

Aromatic azo compounds have -N=N- double bonds as well as larger π electron conjugation system, which endows aromatic azo compounds with wide applications in the fields of functional materials. The properties of aromatic azo compounds are closely related to the substituents on their aromatic rings. However, traditional synthesis methods, such as the coupling of diazo salts, have a great limitation on the structural design of aromatic azo compounds. Therefore, many scientists have devoted their efforts to developing new synthetic methods. Moreover, recent advances in the synthesis of aromatic azo compounds led to the improvement of design and preparation of light-response materials at molecular level. This review summarizes the important synthetic progress of aromatic azo compounds in recent years, with an emphasis on the pioneering contribution of functional nanomaterials in the field.

The orthogonal matrix with cube be symmetric is a common class of matrices with important properties. We pay attention to this kind of matrices. By using the close relationship between the eigenvalues of a matrix and the trace of its power, we obtain the algorithm for its all possible different eigenvalues and multiplicities. The calculation formula is expressed only by the trace of a matrix and its power, avoiding solving the characteristic polynomial. The method is simple and practical. Furthermore, a new essential characterization for the sum of orthogonal matrix pairs being orthogonal is given as well.

(1) In recent ten years, with the fast development of digital and engineering manufacturing technology, additive manufacturing has already been more and more widely used in the field of dentistry, from the first personalized surgical guides to the latest personalized restoration crowns and root implants. (2) Especially, the bioprinting of teeth and tissue is of great potential to realize organ regeneration and finally improve the life quality. (3) In this review paper, we firstly presented the workflow of additive manufacturing technology. Then we summarized main applications and recent research progresses of additive manufacturing in dentistry. (4) Lastly, we sketched out some challenges and future directions of additive manufacturing technology in dentistry.

Molten salt electrolysis stands as an indispensable technique for the production of rare earth metals, where the judicious distribution of the electric field within the electrolytic cell is paramount for ensuring the seamless operation of the electrolysis process. This study introduces a pioneering approach by integrating the Nernst-Planck equation with the Butler-Volmer equation, thereby devising a holographic electric field model tailored for the electrolysis of the NdF3-LiF molten salt system. The paper presents pioneering experimental measurements concerning the potential distribution and voltage drop characteristics within a 6kA rare earth electrolytic cell, elucidating the interplay between decomposition voltage and current density, which substantiates the model's precision. Our findings unveil that, under operational conditions of 4010 amperes, the 6kA electrolytic cell incurs a total voltage drop of 6.3 volts, delineating a melt voltage drop of 4.43 volts, an ohmic voltage drop of 0.248 volts, and an interfacial voltage drop of 1.622 volts at the electrode-electrolyte junction. The discrepancy in error is confined to within 0.3% of the actual measured voltage of 6.28 volts.The simulation outcomes from the holographic electric field model have been confirmed to precisely and comprehensively reflect the characteristics of the electric field distribution during the rare earth molten salt electrolysis process, offering valuable theoretical insights for practical manufacturing applications.

The detection and analysis of small molecules, typically defined as molecules under 1000 Da, is of growing interest ranging from the development of small molecule drugs and inhibitors to the sensing of toxins and biomarkers. However, due to challenges such as their small size and low mass, many biosensing technologies struggle to have the sensitivity and selectivity for the detection of small molecules. Notably, their small size limits the usage of labeled techniques that can change the properties of small molecule analytes. Furthermore, the capability of real-time detection is highly desired for small molecule biosensors’ application in diagnostics or screening. This review highlights recent advances in label-free real-time biosensing technologies utilizing different types of transducers to meet the growing demand for small molecule detection.

In the context of "dual carbon", with the continuous deepening of the power system reform, the application of high proportion renewable energy is becoming increasingly widespread. All sectors of society have put forward higher requirements for electricity sales packages, which can guide the behavior of power users, promote energy conservation and emission reduction, and finally promote low-carbon operation of the power market economy.Therefore, the requirements of power users and power selling companies for the power selling package are increasing, which puts forward higher requirements to the power selling package recommended by the power selling company . However, the existing recommendation methods are unable to make appropriate recommendations for the users with lack of preference information. Therefore, this paper proposes a two-sided matching decision-making method of electricity sales package based on disappointment theory. First of all, according to the incomplete fuzzy preference relationship provided by the power user and the electricity sales package, the respective priority weight vector is obtained, and then the subjective satisfaction matrix of the power user and the electricity sales package to each other is obtained; Next, the adjusted satisfaction matrix is calculated by adding the influence of the theory of joy and disappointment; Then, based on the adjusted satisfaction matrix, an optimization model aiming at maximizing the total satisfaction of power users and electricity sales packages is established, and the optimal stable matching model of power users and electricity sales packages is obtained; Finally, taking an industrial park in Zhejiang Province as an example, by using the bilateral matching method proposed in this article, the optimal matching schemes for 5 power users and 6 electricity sales packages are obtained, which shows the effectiveness and rationality of the two-sided matching decision-making method of electricity sales package based on the disappointment theory proposed in this paper.

Based on data from the Yunnan Province farm household survey, we examine the effect of rural land rights policy on farmers’ income. The regression results show that right significantly raises the total income of farmers, with farm income serving as the primary source of total income. After performing numerous robustness tests, using instrumental variables to handle endogeneity and arriving at the same conclusion, the result is still valid. According to the heterogeneity analysis, in the sample of households with long-term migrant workers, the confirmation of rural land rights significantly increases total and nonfarm income while decreasing farm income. Furthermore, total income includes nonfarm income, which reflects the effect of different farmers' optimal labor allocation based on the external market environment. According to the impact mechanism anal-ysis, right can increase farmers' total income by promoting land transfer, and farmers in less developed areas are more willing to increase their income by land transfer out.

The entry and exit method is a simple and practical method to determine the critical slip surface of slope. However, it has the drawback of sacrificing computational efficiency to improve search accuracy. To solve this problem, this paper proposes an improved entry and exit method to search for the critical slip surface. Based on the random fields generated by using Karhunen–Loève expansion method, the simplified Bishop’s method combined with the improved entry and exit method is used to determine the critical slip surface and its corresponding minimum factor of safety. Then, the failure probability is calculated by conducting Monte Carlo simulation. Two examples are reanalyzed to verify the accuracy and efficiency of the proposed method. Meaningful comparisons are made to demonstrate the calculating accuracy and calculating efficiency of the improved entry and exit method in searching for the minimum safety factor of slope, based on which the effect of the reduced searching range on slope reliability was explored. The results indicate that the proposed method provides a practical tool for evaluating the reliability of slopes in spatially variable soils. It can greatly improve the computational efficiency in relatively high-computational accuracy of slope reliability analysis.