Climate change, growing world population and increasing food demand require higher yields and adaptability of crops, including spring bread wheat. Modern plant breeding based on achievements of genetics has a significant impact on plant resistance to diseases, climate variability and other factors. Genome wide association studies (GWAS) is one of genetics tools for mining of genome loci associated with economically important traits. In the current study, we applied GWAS to reveal QTL for spike productivity and grain quality using a panel of spring varieties of Triticum aestivum L. bred in different decades of the last century in Russia and Germany. The study has enabled to find new genetic markers associated with grain yield and quality. Studying genetic basis of grain yield and quality by comparison of wheat varieties from different breeding periods, including landraces preserved as the source of valuable genetic diversity for breeding and genetic studies, makes it possible not only to understand selection processes in the past, but also to develop strategies for future breeding work.

Hypoxia is one of the common abiotic stresses that negatively affects the development and productivity of agricultural crops. Quercetin is used to protect plants from oxidative stress when exposed to environmental stressors. O2 deficiency leads to impaired development and morphometric parameters in wheat varieties Orenburgskaya 22 (Triticum aestivum) and varieties Zolotaya (Triticum durum). Cytological analysis revealed various types of changes in the cytoplasm under conditions of hypoxia and treatment with quercetin. The most critical changes in the cytoplasm occur in the Zolotaya variety during pretreatment with quercetin followed by hypoxia, and in the Orenburgskaya 22 variety during hypoxia. Quercetin has a protective effect only on the Orenburgskaya 22 variety, and also promotes more effective recovery after exposure to low O2 content. Hypoxia causes an increase in ROS and activates the antioxidant system. It has been shown that the most active components of the antioxidant system in the Orenburgskaya 22 variety are MnSOD and Cu/ZnSOD, and in the Zolotaya variety GSH. We have shown that quercetin provides resistance only to the wheat genotype Orenburgskaya 22, as a protective agent against abiotic stress, which indicates the need for a comprehensive study of the effects of exogenous protectors before use in agriculture.

Analysis of 49 strains of F. langsethiae originating from northern Europe (Russia, Finland, Sweden, UK, Norway, and Latvia) revealed the presence of spontaneous auxotrophic mutants that reflect natural intraspecific diversity. Our investigations detected that 49.0% of F. langsethiae strains were auxotrophic mutants for biotin, and 8.2% of the strains required thiamine as a growth factor. They failed to grow on vitamin-free media. For both prototrophic and auxotrophic strains, no growth defect was observed in rich organic media. Without essential vitamins, a significant reduction in the growth of the auxotrophic strains results in a decrease of the formation of T-2 toxin and diacetoxyscirpenol. In addition, all analysed F. langsethiae strains were distinguished into two subgroups based on PCR product sizes. According to our results, 26 and 23 strains of F. langsethiae belong to subgroups I and II respectively. We determined that the deletion in the IGS region of the rDNA of F. langsethiae belonging to subgroup II is linked with temperature sensitivity and causes a decrease in strain growth at 30 °C. Four thiamine auxotrophic strains were found in subgroup I, while 21 biotin auxotrophic strains were detected in subgroups II. To the best of our knowledge, the spontaneous mutations in F. langsethiae observed in the present work have not been previously reported.

Fourteen Russian potato cultivars (cvs.) grown for three years in field plots of VIR (Northwestern region of the Russian Federation) were evaluated for productivity and a number of biochemical parameters of tubers. The 12 parameters that have been evaluated in tubers annually one month after harvesting and after cold storage (at 2 - 4°C) include the content of dry matter, starch, protein, ascorbic acid, carotenoids and β-carotene, anthocyanins, total sugars and monosaccharides (reducing sugars), phenolic compounds, as well as total acidity, and antioxidant activity. The cultivars differed significantly in productivity and biochemical composition of tubers. Dry matter content ranged from 16.40% in cv. ʻKumachʼ to 27.28% in ʻNayadaʼ, starch content ranged from 8.96 % in cvs. ʻFioletovyjʼ, ʻKumachʼ to 20.08% in ‘Sokur’, the total sugar content reached 2.46% in cv. ʻSiverskij’ whereas ‘Sokur’ has the smallest content of reducing sugars in post-harvest tubers. Protein content ranged from 1.02% to 2.77% with the highest accumulation in cv. ʻSokurʼ. Content of ascorbic acid (vitamin C) ranged from 6.3 mg/100 g FW in ʻKrasa Meŝeryʼ to 26.6 mg/100 g FW in cv. ʻKrasavchikʼ. Carotenoids content ranged from 0.157 mg/100 g FW in cv. ‘Nayada’ to 0.645 mg/100 g FW in cv. ʻGrandʼ. Content of anthocyanins in potato ranged from 1.04 mg/100g FW (not colored tubers of cv. ʻKrasa Meŝeryʼ) to 283.04 mg/100g FW (colored tubers of cv. ʻFioletovyiʼ). The nutritional value of tubers (content of dry matter, sugars, starch and protein) was determined to a greater extent (38-49%) by varietal characteristics, rather than by meteorological conditions in vegetation period. The content of vitamin C, carotenoids, protein and anthocyanins varied depending on the year. The highest content of dry matter, starch and carotenoids was noted in tubers harvested in 2019, marked by low temperatures and precipitation deficit in growing season. The conditions of 2020 with low temperatures and excess precipitation were the most favorable for anthocyanin’s accumulation in potato tubers while not for other biochemical parameters. Of the cultivars, ʻSokurʼ had the highest content of dry matter, protein and starch. Cv. ʻFioletovyiʼ had small starch content and high level of anthocyanins. Cv. ʻPlamyaʼ can be recommended for potato products manufacturing due to dry matter content above 20% and reducing sugars content 0.24%..

Vision impairment may delay responses to hazards when driving. In a proof-of-concept driving simulator study, we evaluated a hazard warning device designed for vision impaired drivers. Three groups participated: 11 persons with central vision loss (CVL; median age 60 years), 12 with homonymous field loss (HFL; 52 years) and 11 with normal vision (NV; 60 years). CVL is characterised by impaired visual acuity and contrast sensitivity while HFL is a loss of vision in the same half of the visual field (blind side) in both eyes. Participants completed drives with and without the device which gave a directional vibro-tactile warning for an approaching pedestrian hazard when collision risk exceeded a pre-defined threshold. Warnings significantly (p< 0.001) reduced brake response times for CVL (∆= 0.54s) and HFL (∆= 0.30s), but not NV participants. For HFL participants, the reduction was greater (p = 0.02) for hazards on the blind (∆= 0.57s) than seeing side (∆= 0.10s). The warnings significantly reduced collision rates for CVL participants from 11 to 0% (all hazards) and for HFL participants from 30 to 1.7% (blind side hazards). Thus, hazard warnings may be beneficial in improving safety of vision impaired drivers; further research is warranted.

Cloud-induced atmospheric extinction and occlusion have a major effect on the effectiveness and quality of telescope observations. Real-time cloud cover distribution and long-term statistical data are essential for astronomical siting and telescope operations. At ground-based astronomical telescope sites, cloud cover distribution is currently analyzed using manual observation methods. However, the main disadvantages of manual observation methods are human subjective, heavy workloads and poor real-time performance. Therefore, a real-time automatic cloud images classification method is desperately needed. This paper presents a new cloud identification method, which is named PSO+XGBoost model by combining eXtreme Gradient Boosting (XGBoost) and Particle Swarm Optimization (PSO). The entire cloud image is divided into 37 sub-regions in order to more precisely identify the distribution of the clouds. 19 features are then extracted, including the sky background, star density, lighting conditions, and subregion grayscale values. The experimental results have shown that the overall classification accuracy of 96.91% and our model is able to outperform several state-of-the-art baseline methods. Our approach achieves high accuracy in comparison with the manual observation methods. Moreover, this method meets telescope real-time scheduling requirements.

Selected glasses with 10 Na₂O + (90-x) P₂O₅ + x BCD where bypass cement dust (BCD) x value =10, 20, 30 in mol% were synthesized by recognizable melting annealing technique. Cooperative characterization of the prepared glasses were carried out through FTIR and SEM analysis before and after immersed in simulated body fluid (SBF) solution for 13 and 23 days at 37 ^oC. After immersion in SBF, apatite layer is produced on the glass surface after 13 day and increase after 23 day, showing good bioactivity after immersion in the SBF especially for bioglass sample with 30% BCD. A porous hydroxy apatite layer produced on the surface of SBF-glass composite and this layer became denser after more soaking time, periods were extended from 13 to 23 days. Atomic absorption spectroscopy explained the early period of soaking that cause release of both Si and Ca ions through the glass beside decreasing of phosphrous ions. Bioglass (BCD-30) is studied as shielding for gamma, protons and alphas by using Phy-X software, SRIM Monte Carlo simulation code and its subroutine TRIM. The gamma shielding parameters, mass stopping power (MSP), range for both proton (H- ions) and alpha (He- ions) in bioglass- BCD-30 and human bone tissue have estimated. Also, comparison between them is calculated in predicting the radiation damage and atomic displacements per atom (dpa).

In this paper, we identify several relative ordering properties of the modified proportional hazard rate and modified proportional reversed hazard rate models. For this purpose, we use two well-known relative orderings, namely the relative hazard rate ordering and the relative reversed hazard rate ordering. The investigation is to see how a relative ordering between two possible base distributions for the response distributions in these models is preserved when the parameters of the underlying models are changed. We will give some examples to illustrate the results and the conditions under which they are obtained.

Bonfire night is a worldwide phenomenon given to numerous annual celebrations characterised by bonfires and fireworks. Since Thailand has no national ambient air quality standards for metal particulates, it is important to investigate the impacts of particulate injections on elevations of air pollutants and ecological health impacts resulting from firework displays. In this investigation, Pb and Ba were considered potential firework tracers because their concentrations were significantly higher during the episode and lower than/comparable with minimum detection limits during other periods, indicating that their elevated concentrations were principally due to pyrotechnic displays. Pb/Ca, Pb/Al, Pb/Mg, and Pb/Cu can be used to pin-point emissions from firework displays. Air mass backward trajectories (72 h) from the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model indicated that areas east and north-east of the study site were the main sources for the air transportation. Although the combined risk associated with levels of Pb, Cr, Co, Ni, Zn, As, Cd, V, and Mn was far below the standards mentioned in international guidelines, the lifetime cancer risks associated with As and Cr levels exceeded US-EPA guidelines, and may expose inhabitants of surrounding areas of Bangkok to elevated cancer risk.

A simple design of an ultrathin six-band polarization-insensitive terahertz perfect metamaterial absorber (PMMA) composed of a metal cross-cave-patch resonator (CCPR) placed over a ground plane was proposed and investigated numerically. The numerical simulation results demonstrate that the average absorption peaks are up to 95% at six resonance frequencies with high quality-factors (>65). In addition, the absorption properties can be kept stability for both normal incident transverse magnetic (TM) and transverse electric (TE) waves. The physical mechanism behind the observed high level absorption is illustrated by the electric and power loss density distributions. The different absorption mainly originates from the higher order multipolar and multipolar plasmon resonance of the structure, which are sharp different to the most previous studies of the PMMAs. Furthermore, the resonance absorption of the PMMA can be tunable by varying the geometric parameters of the unit cell.

A simple design of an ultrathin six-band polarization-insensitive terahertz perfect metamaterial absorber (PMMA) composed of a metal cross-cave-patch resonator (CCPR) placed over a ground plane was proposed and investigated numerically. The numerical simulation results demonstrate that the average absorption peaks are up to 95% at six resonance frequencies with high quality-factors (>65). In addition, the absorption properties can be kept stability for both normal incident transverse magnetic (TM) and transverse electric (TE) waves. The physical mechanism behind the observed high level absorption is illustrated by the electric and power loss density distributions. The different absorption mainly originates from the higher order multipolar and multipolar plasmon resonance of the structure, which are sharp different to the most previous studies of the PMMAs. Furthermore, the resonance absorption of the PMMA can be tunable by varying the geometric parameters of the unit cell.

We use earthquake ground motion modelling via Ground Motion Prediction Equations (GMPEs) and numerical simulation of seismic waves to consider the effects of site amplification and basin resonance in Jakarta, the capital city of Indonesia. While spectral accelerations at short periods are sensitive to near-surface conditions (i.e., Vs30), our results suggest that, for basins as deep as Jakarta’s, available GMPEs cannot be relied upon to accurately estimate the effect of basin depth on ground motions at long periods (>1 s). Amplitudes at such long periods are influenced by entrapment of seismic waves in the basin, resulting in longer duration of strong ground motion, and interference between incoming and reflected waves as well as focusing at basin edges may amplify seismic waves. In order to simulate such phenomena in detail, a basin model derived from a previous study is used as a computational domain for deterministic earthquake scenario modeling in a 2-dimensional cross-section. A M_w 9.0 megathrust, a M_w 6.5 crustal thrust and a M_w 7.0 instraslab earthquake are chosen as scenario events that pose credible threats to Jakarta, and the interactions with the basin of seismic waves generated by these events were simulated. The highest PGV amplifications are recorded at sites near the middle of the basin and near its southern edge, with maximum amplifications of PGV in the horizontal component of 200% for the crustal, 600% for the megathrust and 335% for the deep intraslab earthquake scenario, respectively. We find that the levels of ground motion response spectral acceleration fall below those of the 2012 Indonesian building Codes's design response spectrum for short periods (< 1 s), but closely approach or may even exceed these levels for longer periods.

Job characteristics shape organizational sustainability, conferring tangible benefits to employees. Job characteristics shape attitudes toward work, such as satisfaction and engagement, and are related to the well-being and health of employees. The aim of the study was to determine and describe the role of work engagement and support at work in the relation between selected job characteristics (organizational justice, job control, and role clarity) and self-rated health. The study was conducted on a sample of 368 employees representing various industries. The study used: Utrecht Work Engagement Scale (UWES), Organizational Justice Survey, Coworker Support Scale, Supervisor Support Scale, Role Clarity Scale, Job Control Scale. Cantril ladder was used to measure self-rated health. The presented study established the importance of lower scores on the UWES subscale: dedication as a significant moderator of the examined correlations. In relation to the correlation: justice and its dimensions, and self-rated health, support from supervisors showed a greater effect than that from coworkers. The conducted study expands knowledge on the formation of employees' self-rated health through the sense of justice experienced within the organization. The results obtained are applicable to organizational practice. This finding highlights the importance of supporting organizational justice, which contributes to employee well-being (particularly when combined with high levels of work engagement and supervisor support) and ultimately increases organizational sustainability. Further research can be continued taking into account the limitations of the previous procedure of selecting people for the study and the measurement tools used.

Background and Objectives: Cancer as the second leading cause of death in the United States poses a huge healthcare burden. Barriers to access to advanced therapies influence the outcome of cancer treatment. In this study, we examined whether insurance types affect the quality of cancer clinical care regarding access to an important monoclonal antibody, ramucirumab. Materials and Methods: Data for 13,340 cancer patients with Purchased or Medicaid insurance from the All of Us Database were collected for this study. The Chi-square test of proportions was employed to determine the significance of patient cohort characteristics and ramucirumab usage between Purchased and Medicaid insurance groups. The independent t-test was utilized to assess the influences of other determinants on insurance types. Results: Cancer patients who are African American, with lower socioeconomic status, or with lower educational attainment are more likely to be insured by Medicaid. Analysis of survey questions demonstrated the relationship between income and education level with insurance type as Medicaid cancer patients were less likely to receive primary care and specialist physician access and more likely to request lower cost medications. In addition, those with Medicaid insurance were identified to have poorer access to expensive therapeutics like ramucirumab compared to those with Purchased insurance.  Conclusions: The inequities of the US healthcare system are observed for cancer patient care; access to physicians and therapeutics are highly varied and dependent on insurance types. Socioeconomic status determines insurance type, which unfortunately generates a significant impact on cancer treatment and disease outcome.

There is an increasing need for quantitative rockfall hazard and risk assessment that requires a precise definition of the terms and concepts used for this particular type of landslide. This paper suggests to use terms that appear to be the more logic and explicit as possible, and describes methods to derive some of the main hazard and risk descriptors. The terms and concepts presented concern the rockfall process (failure, propagation, fragmentation, modelling) and the hazard and risk descriptors, distinguishing the cases of localized hazards and diffused hazards. For a localized hazard, the failure probability of the considered rock compartment in a given period of time has to be assessed and the probability for a given element at risk to be impacted with a given energy must be derived combining the failure probability, the propagation probability and the exposure of the element. For a diffuse hazard that is characterized by a failure frequency, the number of rockfalls reaching the element at risk per unit of time and with a given energy (reach frequency) can be derived. However, when the element at risk is not replaced or repaired, the probability that it is impacted by at least one rockfall must be considered.

In Taiwan, mountainous areas account for approximately two-thirds of the total area. The steep terrain and concentrated rainfall during typhoons cause landslides, which pose a considerable threat to mountain settlements. Therefore, models for analyzing rainfall-induced landslide hazards are urgently required to ensure adequate land use in mountainous areas. In this study, focusing on Pingtung County in southern Taiwan, we developed a landslide hazard index (IRL) to land use. Using FORMOSA-2 and SPOT-5 satellite images, data were collected before and after four typhoons (one in 2009 and three in 2013). The ArcGIS random tree classifier was used for interpreting satellite images to explore surface changes and disasters, which were used to analyze slope disturbances. The product of the maximum 3-h rolling rainfall intensity and effective accumulated rainfall was used as a rainfall trigger index (IRT). Considering environmental and slope disturbance factors, an index of slope environmental strength potential (ISESP) was developed through logistic regression (LR). Landslide hazard to land use was estimated using IRT and ISESP. The average coefficient of agreement (Kappa) was approximately 0.71 (medium to high accuracy); the overall accuracy of slope environmental strength potential analysis was approximately 80.4%. At a constant ISESP, IRT increased with the increasing hazard potential of rainfall-induced landslides. Furthermore, IRT and ISESP were positively correlated with landslide occurrence. When large ISESP values occur (e.g., fragile environment and high land development intensity), small IRT values may induce landslides.

The socio-economic benefits of globalization cannot be overemphasized. However, the global spread of infectious diseases has so followed a parallel course. The recent wave of pandemics with emerging new diseases has shown that no part of the world is immune from the spread of infectious diseases. COVID-19 like previous pandemics has exposed inadequacies of our healthcare systems and global capacity for prevention, early detection, and response in pandemic outbreaks. Given the highly interconnected global economy and the high potential for passim spread of infections, every nation must not only come up with concerted efforts to prevent and better prepare for pandemics, international solidarity and engagements will also be critical to ensure a long-lasting and sustainable solution. We are only as strong as our weakest health system, global support to strengthen all health systems around the world is the most effective way to be pandemic – ready. ‘All for one and one for all’.

Debris flows have generated major disasters worldwide due to their great destructive capacity, which is associated with their high energy levels and short response times. To achieve an adequate risk management of these events, it is necessary to define as accurately as possible the different hazard levels to which the territory is exposed. This article develops a new methodology to estimate this hazard based on the hydrodynamic characteristics of the flow and the granulometry of the sediments that can be mobilized by the flow. The hydrodynamic characteristics of the flow are determined through a mathematical modeling that considers the rheology of non-Newtonian flows and the different volumes of sediments that could be transported during events corresponding to different return periods. The proposed methodology was implemented in the Jamundí River basin (Colombia). The results obtained indicate that in the upper part of this basin there is a low hazard level, while in the lower part of the basin approximately 15% of the affected territory has a medium hazard level and the remaining 85% has a low hazard level. The methodology developed is simple to implement but technically rigorous since it considers all relevant aspects in the generation of debris flows.

The world tsunami hazard map is developed to understand the pattern of occurrence of tsunami across the globe and for using this database for preparing effective evacuation plan and rescue operations. It has been developed by using Web GIS tools. HTML, CSS, Java Script, JQuery, IIS and Maps API are utilized to develop hazard map. These data can be even used by government authorities as well as by other nodal agencies.

Water resource management and flood forecasting are crucial societal and financial stakes requiring reliable predictions of flow parameters (depth, velocity), the accuracy of which is often limited by uncertainties in hydrodynamic numerical models. In this study, we assess the effect of two uncertainty sources, namely breach characteristics induced by overtopping and the roughness coefficient, on water elevations and inundation extent. A two-dimensional (2D) hydraulic solver was applied in a Monte Carlo integration framework to a reach of the Loire river (France) including about 300 physical parameters. Inundation hazard maps for different flood scenarios allowed highlighting the impact of the breach development chronology. A special attention was paid to proposing a relevant sensitivity analysis to exam the factors influencing the depth and extent of flooding. The spatial analysis of vulnerability area induced by a levee breach width exhibits that, with increasing the flood discharge, the rise of the parameter influence is accompanied by a more localized spatial effect. This argues for a local analysis to allow a clear understanding of the flood hazard. The physical interpretation, highlighted by a global sensitivity analysis, showed precisely the dependence of the flood simulation on the main factors studied, i.e. the roughness coefficients and the characteristics of the breaches.

The extension of virology beyond its traditional medical, veterinary or agricultural applications, now called environmental virology, has shown that viruses are both the most numerous and diverse biological entities on earth. In particular, virus isolation studies involving unicellular eukaryotic hosts (heterotrophic and photosynthetic protozoans) revealed numerous viral types previously unexpected in terms of virion structure and morphology, genome size and gene content, or mode of replication. Complemented by large-scale metagenomic analyzes, these discoveries have rekindled interest in the enigma of the evolutionary origin of viruses, for which no simple definition encompassing all of their diversity is still unanimous. Several laboratories have repeatedly tackled the deep reconstruction of the evolutionary history of viruses, using various methods of molecular phylogeny applied to the few shared genes detected in certain virus groups (e.g. the Nucleocytoviricota). Beyond the practical difficulties of establishing reliable homology relationships from extremely divergent sequences, I present here purely conceptual arguments highlighting several fundamental limitations plaguing the reconstruction of the deep evolutionary history of viruses, and even more the identification of their unique of multiple origin (s). Those limitations are direct consequences of the particularly random mechanisms which govern the reductive evolution of obligate intracellular parasites.

Information is physically measurable as a selection from a set of possibilities, the domain of information. This defines the term "information". The domain of the information must be known together reproducibly beforehand. As a practical consequence, digital information exchange can be made globally efficient, interoperable and searchable to a large extent by online definition of application-optimized domains of information. There are even more far-reaching consequences for physics. The purpose of this article is to present prerequisites and possibilities for a physical approach that is consistent with the precise definition of information. This concerns not only the discretization of the sets of possible experimental results, but also the order of their definition along time. The access to or comparison with the domain of information is the more frequent, the earlier it was defined. The geometrical appearance of our space is apparently a delayed statistical consequence of a very frequent connection with the common primary domain of information.

Construction safety is especially important because the construction industry is so important to a country's development. Significant research and practice have been conducted to mitigate potential risks during construction and improve worker efficiency. With the rapid advancement of cognitive neuroscience and the incorporation of medical technology in recent years, various wearable monitoring devices have been widely used in the construction field for real-time monitoring of workers' physical and mental status. Among these, the use of EEG (Electroencephalogram) in construction environment research allows researchers to gain insight into the physical and mental states of construction workers while performing construction tasks. This review introduces EEG technology and portable EEG devices, followed by an overview of their use in both monitoring workers' adverse reactions and identifying hazards on construction sites, providing an effective guide for EEG research in the construction field and on-site safety management.

In this study, I extend the Fama and French five-factor asset pricing model with a sixth factor, namely, carbon risk, to investigate its impact on equity returns. To measure carbon risk, a new factor ‘pollutant minus green,’ is developed using the difference between the weighted average returns of pollutant and green firms across 51 developed and emerging countries across four categories—North America, Europe, Emerging Markets, and the Asia Pacific. The results reveal that North America, Europe, and Asia Pacific markets have a carbon risk premium that gets eliminated in small-cap firms. The carbon risk factor is further tested in left-hand side (LHS) test asset portfolios and found to be more pronounced with size-effect anomaly; specifically, small stock firms report greater declining average returns because of more exposure than the mega-cap stocks to carbon dioxide emissions. Furthermore, size-effect anomaly prevails with profitability and investment factors across firms. Therefore, high profitability, as well as high investment small firms, show a greater decline than the big stock firms in average returns when their carbon dioxide emissions increase. The asset pricing model evaluation is carried out through the Gibbons, Ross, and Shanken test. The six-factor model directed at capturing carbon risk patterns in average equity returns performs better than the three-factor and five-factor models of Fama and French (1993 and 2015) in the majority of categories under 3x3 sorting and compete with both Fama and French model under 2x4x4 sorted LHS portfolios. The finding of this study offers various useful applications for investors, policymakers, brokers, corporations, governmental pollution abatement institutions, and other stakeholders who wish to obtain carbon risk premium.

Parasite control strategies such as blanket anthelmintic treatment of all horses in a herd or interval treatment regimen based on egg reappearance remain widely followed practices for the last several decades. These practices have resulted in the fast emergence of resistance in equine strongyles to all major classes of drugs on the market. In this regard, the guidelines set by the American Association of Equine Practitioners advocate evidence-based strongyle control in horses. It recommends targeted treatment of all heavy egg shedders [&gt; 500 eggs per gram (EPG) of feces] while the low shedders (0-200 EPG) are left untreated to maintain susceptible parasite refugia in a herd. As 50-75% of adult horses in a herd are low shedders, preventing them from unnecessary anthelmintic exposure is critical to tackling resistance. There are various fecal egg count (FEC) techniques with many modifications and variations in use, but none is identified as a gold standard and methods comparison studies are lacking. We hypothesized that the diagnostic performance of commonly used quantitation methodologies differs and the FEC methods must be evaluated to determine the gold standard. In this regard, we performed methods comparison studies using polystyrene beads with size and specific gravity comparable to strongyle eggs, as proxy. The linearity of 12 commonly used FEC methodologies (3 techniques with 4 different solutions) was studied using bead standards in the clinically applicable range (63 to 1,000) to determine their suitability for strongyle egg counts. Deming regression analysis identified Mini-FLOTAC with sugar (specific gravity 1.33) as the test with the greatest coefficient of determination. All tests underestimated the true bead count, and we determined a correction factor (CF) for each test to estimate the true count. CF negates the preference for a gold standard test. Finally, we analyzed the validity of CF for 5 tests with R2&gt;0.95 to accurately quantify strongyle eggs from 40 different horses. Overall, this study identified methodologies with the highest diagnostic performance and the limitations to standardizing routine FEC tests to promote uniformity in implementing AAEP parasite control guidelines.

The term “risk” is connoted with divergent meanings in natural hazard risk research and the practice of risk management. Whilst the technical definition is accurately defined, in practice, the term “risk” is often synonymously used with “danger”. Considering this divergence as a deficiency, risk communication often aims to correct laypersons’ understanding. We suggest in reference to Breakwell (2001) to treat the variety of meanings as a resource for risk communication strategies instead. However, there is no investigation so far, of what laypersons’ meanings of risk actually comprise. To address this gap, we examine the meanings of risk applying a social representations approach (Moscovici, 2001) in a qualitative case study design. Results of the study among inhabitants of Swiss mountain villages show that differences in meanings were found according to hazard experience and community size. We found commonly shared core representations, and single peripheral ones. We conclude with suggestions on how to make usage of the knowledge on SR in risk communication.

To date, the patent foramen ovale (PFO) does not get the deserved medical attention. The PFO poses a serious threat to health and even life of mankind. The first respective case report in the medical literature dates back to the 19th century. It led to death. The fact that a PFO is present in roughly 25% of people underscores its overall potential to do harm. Yet at the same time by the sheer number, it discourages the medical community from screening for it and from treating it. About 5% of the population have particularly dangerous forms of PFOs. Such PFOs portray a high enough risk for clinical events, the likes of death, stroke, myocardial infarction, or ocular, visceral, and peripheral embolism, to justify screening for them. Highly significant health incidents being at stake, it appears obvious that PFO closure should be used for primary prevention. This is supported by the fact that closing a PFO is the simplest intervention in cardiology, with presumably the highest clinical yield. Being mainly a preventive measure, PFO closure represents a mechanical vaccination. When closing PFOs for one of the rarer therapeutic indications (migraine, platypnea orthodeoxia, etc.), patients automatically profit from the collateral benefit of getting at the same time mechanically vaccinated for life against paradoxical embolism. Vice versa, closing a PFO for prevention of paradoxical embolism not infrequently betters or cures migraine or exercise dyspnea, thereby improving quality of life as a collateral benefit.

Mucosal healing (MH) is the main treatment target in ulcerative colitis and Crohn’s disease, and it is defined by a combination of complete endoscopic and histologic remission. Indeed, the complete resolution of mucosal inflammation should be confirmed at histology. Neutrophil infiltration represents the unique histological marker in discriminating the active vs quiescent phase of disease, also including crypt injuries (cryptitis and crypt abscesses), erosions and ulcerations. Basal plasmacytosis do not qualify by itself the remission in inflammatory bowel diseases (IBD), but it represents a diagnostic clue, mostly at onset. Several histological scoring systems have been developed to evaluate therapeutic efficacy, even though they often resulted tricky and subjective. Moreover, these scores listed a heterogeneous group of histological features as parameters. The recently proposed simplified histological score on MH was based on neutrophils and their distribution in the gut mucosa was also considered, aiming to provide a simple, time-sparing and reproducible tool to be applied to the routinary diagnostic practice. The artificial intelligence could be a promising tool both in evaluating and standardizing the histological assessment of disease activity in IBD. Moreover, novel molecules involved in the inflammatory dynamics in the gut could be employed in supporting the diagnostic practice in IBD.

Yogyakarta City is one of the big city which is located in Java Island, Indonesia. Yogyakarta City, including study area (Pleret Sub District), are very prone to earthquake hazards, because close to several active earthquake sources. For example, Sunda Megathrust which often generates a big earthquake which can affect the study area. The Sunda Megathrust extends from north to south and west to east along the Sumatra and Java Islands. Furthermore, an active normal fault called as Opak Fault pass through right in the middle of Study area and divides the study area into east and west zone. Recently, after the devastating earthquake in 2006, the population of the study area increases significantly. As a result, the housing demand is also increasing. However, due to the absence of earthquake building code in the study area, locals tend to build improper new houses. Furthermore, in some part of the mountainous area in the study area, there are some building found in unstable slopes area. Due to this condition, the multi-hazard and risk study needs to be done in Pleret. The increasing of population and improper houses in Pleret Sub-District can lead to amplify the impact. Thus, the main objective of this study is to assess the multi-hazards and risk of earthquake and other related secondary hazards such as ground amplification, liquefaction, and coseismic landslide. The method mainly utilised the geographic information system, remote sensing and was fit up by the outcrop study. The results show that the middle part of the study area has a complex geological structure. It was indicated by a lot of unchartered faults was found in the outcrops. Furthermore, the relatively prone areas to earthquake can be determined. In term of the coseismic landslide, the prone area to the coseismic landslide is located in the east part of the study area in the middle slope of Baturagung Escarpment. The highly potential area of liquefaction is dominated in the central part of the study area. In term of building collapsed probability, the result shows that the safest house based on statistical analysis is the residential house with the building attribute of wood structure, roof cast material, distance more than 15 km from the earthquake source, and located above the Nglanggran Formation. Finally, the multi-hazard and risk analysis show that the middle part of the study area is more vulnerable than the other part of Pleret Sub-District.

Currently there is no multi-hazard risk assessment tool for determining the level of complexity to swiftwater and flood rescue incidents. Traditionally, the International Scale of River Difficulty is used but it is primarily for paddlers for use in a recreational context, without much consideration to the multitude of hazards faced in swiftwater and flood rescue environments. In response to this gap, the ECHO risk assessment tool has been developed and undergone initial testing. This tool provides for simple and rapid codification of multiple hazards and response considerations and is globally applicable. The tool also assigns a final risk assessment colour making the interpretation of the assessment easy to understand and communicate. Though the proposed tool shows potential, further research is needed before it should be operationalised.

Paramedics are increasingly being subjected to violence, creating the potential for significant physical and psychological harm. Where a patient has a history of violent behavior, hazard flags - applied either to the individual, their residential address, or phone number - can alert paramedics to the possibility of violence, potentially reducing the risk of injury. Leveraging a novel violence reporting process embedded in the electronic patient care record, we reviewed violence reports filed over a thirteen-month period since its inception in February 2021to assess the effectiveness of hazard flagging as a potential risk mitigation strategy. Upon reviewing a report, paramedic-supervisors can generate a hazard flag if recurrent violent behavior from the patient is anticipated. In all, 502 violence reports were filed, for which paramedic-supervisors generated hazard flags in 20% of cases (n=99). In general, cases were not flagged either because the incident occurred at a location not amenable to flagging, or because the supervisors felt that a hazard flag was not warranted based on the details in the report. Hazard flagging was associated with an increased risk of violence during subsequent paramedic attendance (Odds Ratio [OR] 6.21, p

Let Vn(d) denote the least number such that every collection of nd-cubes with total volume 1 in d-dimensional (Euclidean) space can be packed parallelly into some d-box of volume Vn(d). We show that V3(d)=r1−dd if d≥11 and V3(d)=1r+1rd+1r−rd+1 if 2≤d≤10, where r is the only solution of the equation 2(d−1)kd+dkd−1=1 on 22,1 and (k+1)d(1−k)d−1dk2+d+k−1=kddkd+1+dkd+kd+1 on 22,1, respectively. The maximum volume is achieved by hypercubes with edges x, y, z such that x=2rd+1−1/d, y=z=rx if d≥11, and x=rd+(1r−r)d+1−1/d, y=rx, z=(1r−r)x if 2≤d≤10. We also proved that only for dimensions less than 11 there are two different maximum packings, and for all dimensions greater than 10 the maximum packing has the two smallest cubes the same.

Universal education is an elusive goal in many countries, especially for disabled children. Nonetheless determined efforts around the globe have shown that it can become a reality once existing systems were re-imagined by practitioners who arguably have been to the fore more so than academic researchers. Their efforts have identified new ways of thinking about children’s disabilities, the introduction of new practices in schools, forging partnerships between teachers and parents, and mobilising community resources. Societal change is both a consequence of, and a support to these local systems. The complexity of creating education for all may be daunting but it is achievable when driven by committed, creative and inspirational leadership from practitioners as is evident from the examples provided in this paper which have been further validated by research and evaluation into their efforts.

Understanding and improving seismic resilience in regions prone to earthquakes is crucial for mitigating the effects of natural disasters. This study zeroes in on Montenegro, a region frequently affected by seismic activity, with the goals of critically evaluating current resilience levels, pinpointing key preparedness gaps, and assessing the efficacy of existing response strategies. Employing qualitative methods, the research involved semi-structured interviews with residents from Montenegro's most vulnerable areas, including Nikšić, Podgorica, Bar, Kotor, Cetinje, Budva, Herceg Novi, and Berane. These participants, selected for their firsthand experiences with significant earthquake impacts, contributed to a deeper understanding through discussions that aligned with a broad conceptual framework, exploring everything from the nuances of citi-zen resilience to local government responses and personal preparedness. The study aimed to gather in-depth views on community resilience during earthquakes, evaluate citizens' knowledge and preparedness for such disasters, and examine local governance strategies for enhancing seismic resilience. It revealed varying resilience levels across communities, with some displaying well-structured strategies while others showed notable deficiencies. The findings underscore the urgent need for community-specific preparedness programs and improvements in both structural and educational frameworks to enhance resilience. This research highlights the necessity of a comprehensive approach that includes detailed risk assessments, tailored preparedness training, and stronger public awareness efforts. Additionally, it emphasizes strengthening local governments' capabilities to enact and sustain effective response measures to ensure ongoing community resilience against future seismic challenges.

For risk communication, it is important to understand the difference between "hazard" and "risk". Definitions can be found in Codex Alimentarius and the European Union (EU) General Food Regulation (EC) No 178/2002. The use of these terms as synonyms or their interchange is a recurrent issue in the area of food safety, despite awareness-raising messages sent by EFSA (European Food Safety Authority) and other interested entities. A quick screening of EU’s food regulations revealed several inconsistencies. Hence, it was considered necessary to further investigate if regulations could act as a source for this problem. A software tool was developed to support the detection and listing of inconsistent translations of “hazard” and “risk” in certain EU food regulations. Subsequently, native-speaking experts working in food safety, from each EU country, were asked to provide their individual scientific opinion on the prepared list. All data was statistically analyzed after applying numerical scores (1-5) describing different levels of consistency. Results showed that the most common problem was the interchange of “hazard” with “risk” and vice versa. This lack of consistency can create confusion that can further translate into misjudgments at food risk assessment and communication level.

Nepal is one of the most seismically active regions in the world, as highlighted by the recent devastating 2015, Mw7.8 Gorkha earthquake and a robust assessment of seismic hazard is paramount for the design of earthquake-resistant structures. In this study we present a new probabilistic seismic hazard assessment (PSHA) model for Nepal. We considered data and findings from recent scientific publications, which allowed us to develop a unified homogenized seismicity catalogue, propose alternative Seismic Source Characterization (SSC) models including up-to-date parameters of major thrust faults like Main Frontal Thrust – MFT and Main Boundary Thrust – MBT, while also considering existing SSC models and various hazard modelling strategies within a logic tree framework. The sensitivity analyses show the hazard levels are generally higher for SSC models integrating the major thrust faults, followed by homogenous volume sources and smoothed seismicity approach. The hazard maps covering entire Nepal is presented as well as the Uniform Hazard Spectra (UHS) for 5 selected locations (Kathmandu, Pokhara, Biratnagar, Nepalganj and Dipayal) at return periods of 475- and 2,475-years considering Vs,30=760 m/s. The results obtained are generally consistent with most recent studies. However, a notable variability in hazard levels and several discrepancies with respect to the Nepal Building Code NBC105: 2020 [1] and Global Hazard Model, GEM [2] are noted and possible causes are discussed.

The 26th June, 1917 tsunamigenic earthquake in Samoa is considered the largest historical event on record to have impacted this region in terms of earthquake magnitude and intensity. Yet, very little is known about the scale and distribution of tsunami impacts for this event compared with the recent 2009 tsunamigenic earthquake which originated in a proximal source region at the Northern Tonga Trench. In this paper, we reconstruct the 1917 tsunami from source to inundation using the BG-Flood numerical modelling suite to understand the magnitude of inundation for this event. Model outputs representing inundation extent and hazard depth intensities at spatially flexible grid resolution (10 m, 20 m and 40 m), are validated using available tide gauge records in Apia harbour and limited observations of runup that were derived from historical records. Results indicate variable modelled-to-observed consistency using available source models, wave and runup validation data. Significant discrepancies in recorded vs modelled wave arrival time at Apia of between 30—40 mins are observed, with modelled runup underestimated in southeast Upolu Island compared with the rest of the country where runup observations are available (e.g., west Savai’i Island). We combine the inundation model with available digital distributions of buildings and roads in the RiskScape multi-hazard risk analysis software, to produce exposure metrics for understanding the likely impacts on present-day coastal asset and population distributions if a similar tsunami were to occur. A comparison between the distribution of hazard risk exposure for the 1917 and 2009 events is discussed along with the uncertainties in our results, with suggestions for future work offered.

The climate crisis is developing to a life-changing event on a global level. Health promotion with the aim to increase the health status of individuals, independent from the present health status has been developed on scientific basis at least for the last eight decades and follows. There are some basic principles, which are prerequisites for both, health promotion and climate protection. Those principles include (1) sustainability, (2) orientation on determinants, and (3) requirement of in-dividual as well as community approaches. People are generally aiming to protect their lifestyle habits (e.g. traveling, consumer habits) and personal properties (e.g. car, house) by easy solution with as little effort as possible, and this can affect both, health and climate. To reduce the emission of greenhouse gases and to protect our environment, changes towards a sustainable lifestyle have to be embed into everybody’s mind. Examples for domains, that need to be addressed in health promotion as well as in climate protection include education/ knowledge/ (health) literacy, physical activity, nutrition and dietary habits, mental health, and social capital. If health promo-tion fails to tackle those domains, this will continue to drive climate crisis. And climate change, in turn, will affect health. On the other hand, developing and promoting health resources in the domains mentioned could again help to mitigate the health-damaging effects of climate change.

Black soldier fly larvae (BSFL) can use food by-products or residues as a growth substrate, and their use is considered a strategic solution to improve the sustainability and efficiency of animal production. BSFL need to be reared under controlled environmental conditions, as temperature can affect the welfare of the larvae and the efficiency of their bioconversion. The goal of this experiment was to test different diets: control, vegetable, carnivorous, omnivorous and to assess their effect on larval growth performance, chemical composition, and substrate temperature. BSFL (6-days-old) were randomly selected and allocated to one of the four diets for the entire experiment (8 days). The temperature in each container was measured twice daily using a thermal imaging camera. The vegetable diet led to significantly lower growth performance (p

This paper provides a review of the aerodynamic behavior of horizontal axis wind turbines operating in hazardous environmental conditions. Over the past decade, renewable energy use has accelerated due to global warming, depleting fossil fuel reserves, and stricter environmental regulations. Among renewable options, solar and wind energy have shown economic viability and global growth. Horizontal axis wind turbines offer promising solutions for sustainable energy demand. Since wind turbines operate in an open environment, their efficiency depends on environmental conditions. Hazard environmental conditions, such as icing, rainfall, hailstorm, dust or sand, insects’ collisions, increased humidity and sea spray, result in degraded aerodynamic performance. The outcome of the most studies is that lift is degraded and at the same time drag is increased when wind turbines operate under these conditions. The objective of this review is to improve our comprehension of the crucial aspects to take into account when designing wind turbine blades, and it offers suggestions for future research paths. It serves as a valuable resource that can inspire researchers who are dedicated to enhancing the aerodynamic performance of horizontal axis wind turbines.

In this study, we investigate the performance of the saddlepoint approximation of the probability mass function and the cumulative distribution function for the weighted sum of independent Poisson random variables. The goal is to approximate the hazard rate function for this complicated model. The better performance of this method is shown by numerical simulations and comparison with a performance of other approximation methods.

Malaria is a disease spread by female mosquitos of the Anopheles genus. It is acutely prevalent in Sub-Saharan Africa, where 90% of malaria deaths occur annually. One Sub-Saharan African country historically impacted by malaria is Ethiopia. In the past twenty years, malaria prevalence has decreased throughout Sub-Saharan Africa; yet, anthropogenic environmental changes are changing the landscape of malaria. Scholarly literature has cited a positive relationship between hydroelectric dams and malaria in Sub-Saharan Africa. Ethiopia is currently expanding their hydroelectric infrastructure. The Gilgel Gibe III Dam is located on the Omo River in Southwestern Ethiopia. It began generating electricity in 2015 and its reservoir has a capacity of 14,700 million m3 of water. This research utilized Geographic Information Systems and Remote Sensing to identify populations at an increased risk of malaria due to Gilgel Gibe III Dam. Two different techniques were employed: the proximity approach and the remote sensing approach. The proximity approach was based on distance from the reservoir. It identified all populations living within three kilometers of the reservoir as being at an increased risk. The remote sensing approach evaluated the slope, elevation, water content, and land surface temperature of the study area to create a mosquito breeding habitat risk map. Then, populations living within three kilometers of the two main High-Risk areas were identified. This study suggests that mosquito breeding habitat risk is not equally distributed throughout the Gilgel Gibe III Reservoir. This causes certain populations to be at a heightened risk of malaria.

Lead-free copper halide perovskite nanocrystals (NCs) are emerging materials with excellent photoelectric properties. Herein, we present a colloidal synthesis route of orthorhombic Cs2CuCl4 NCs with well-defined cubic shape and an average diameter of 24 ± 2.1 nm. The Cs2CuCl4 NCs exhibit bright deep blue photoluminescence, which is attributed to the Cu(II) defects. In addition, passivating the Cs2CuCl4 NCs by Ag+ can effectively improve the photoluminescence quantum yield (PLQY) and environmental stability.

This article focuses on the analysis of dynamics emerging in a Network of Hodgkin-Huxley Reaction-Diffusion equations. The network is forced with three external periodic stimulus input. A synchronization phenomenon is observed.

The increased accessibility of drone technology and the wide use of Structure from Motion 3D scene reconstruction have transformed the approach for mapping inaccessible slopes undergoing active rockfalls. The Poggio Baldi landslide offers the possibility for many of these techniques to be deployed and integrated with the aim of defining a suitable workflow for the analysis of hazards in mountainous regions. The generation of multitemporal digital slope twins (2016 – 2019), informed a rockfall trajectory analysis that was carried out with a physical-based GIS model. We tested the rockfall scenario reconstructed and calibrated on the analysis of the rock mass characteristics and the geometrical and physical constraints given by the multi-temporal analysis of the SfM point clouds. This time-independent rockfall hazard analysis is a critical component to any subsequent holistic risk analysis on this case study, and any potential similar mountainous setting.

By framing the problem of determining the state of Schrodinger’s cat as a problem of searching for Hidden Markov Model (HMM), this work shows that Schrodinger’s cat is dead with stationary probabilities P(Cat = Dead) = 1 and P(Cat = Alive) = 0 consistently in various observation-based modelling of the HMM.

The North Railway in the Kingdom of Saudi Arabia (KSA) extends over vast areas, crossing various terrains, including valleys, sand veins, plateaus, and hills. Therefore, the Railway was designed and implemented to suit this environmental diversity under the highest safety standards. However, the Railway may be subject to hazards for various reasons. In general, the possibility of direct surface runoff disasters increases if there are residential areas and facilities within the boundaries of drainage basins. Therefore, these areas should be studied, and the degree of hazard in drainage basins should be accurately determined. Hence, this study analyzed the degree of risk of 14 drainage basins affecting the North Train railway within the Wadi Malham drainage basin, using the risk degree model with eight parameters that have hydrological indications to give an idea of the behavior of direct surface runoff and interfere with increasing the risk of direct surface runoff. Researchers found 28.57% of the total basins in the study area have high-risk basin overall score values, which are basins 6, 7, 13, and 14. It is recommended to estimate the rainfall depth during different return periods, analyze soil permeability and land use classification in the study area, and apply hydrological modeling of drainage basins, which contributes to estimating the volume and peak of direct surface runoff in such arid and semi-arid environments that do not contain hydrometric stations to monitor the runoff. .

Sediment thickness increases can cause floodplains and the water level increases. This has the potential to generate a flood. Using electromagnetic waves, Time Domain Electromagnetic (TDEM) detected resistivity or conductivity contrast of lithology in the subsurface. It is measured in the time domain. TDEM method has been developing for decades. Here we tried to develop a 1-D forward modelling program for central loop configuration in the water environment using the Adaptive Born Forward Mapping (ABFM) method. We simulated this program in several water environment conditions (such as freshwater, brackish water and saline water) to know its response. Preventing natural hazards, especially flood hazards which are caused by the floodplain increases is our motivation in this research. Our simulation shows that Central-Loop Configuration Time-Domain Electromagnetic Method is able for imaging the sediment thickness clearly. The response of this method is extremely sensitive in saline water to depth changing than in other water environments.

The disastrous 2017 fire season in Portugal lead to widespread recognition of the need for a paradigm shift in forest and fire management. We focused our study on Alvares, a parish in central Portugal which had 60% of its area burned in 2017, with a large record of historical. We evaluated how different fuel treatment strategies can reduce wildfire hazard in Alvares, through i) a fuel break network with different priorities and ii) random fuel treatments resulting from stand-level management intensification. To assess this, we developed a stochastic fire simulation system (FUNC-SIM) that integrates uncertainties in fuel distribution over the landscape. If the landscape remains unchanged, Alvares will have large burn probabilities in the north, northeast, and center-east areas of the parish that are very often associated with high fire line intensities. The different fuel treatment scenarios decreased burned area between 12.1-31.2%, resulting from 1%-4.6% increases in annual treatment area, and reduced 10%-40% the likelihood of wildfires larger than 5000 ha. On average, simulated burned area decreased 0.22% per each ha treated, and effectiveness decreased with increasing area treated. Overall, both fuel treatment strategies effectively reduced wildfire hazard and should be part of a larger, holistic and integrated plan to reduce the vulnerability of the Alvares parish to wildfires.

Coastal inundation is an increasing problem. Sea-level rise will greatly increase the frequency and depth of inundation, forcing vulnerable communities to adapt. Communities will need to decide when and how to adapt. The process of decision-making along adaptive pathways is now being used internationally to plan for adaptation over time by anticipating decision points in the future however it unfolds. This process requires risk and uncertainty considerations to be transparent in the scenarios used in such planning. We outline a framework for uncertainty identification and management within coastal hazard assessments which recognizes different types of decision and identifies the types of uncertainty that must be accounted for, such as statistical, scenario and deep uncertainty types. We show how coastal-inundation hazard can be mapped and presented in a way that clearly separates sources of uncertainty, so that they are transparent within a dynamic adaptive pathways planning process. Traditional coastal inundation maps show inundated area only. We present maps of inundation depth and frequency which clearly show the degree of exposure, where that exposure occurs, and how much sea-level rise can be tolerated. The new uncertainty framework and mapping techniques can better identify decision points and their expected time range, which provides more useful input to the adaptation process than traditional coastal inundation assessments.

The objective of this study was to identify the factors determining a company’s corporate governance related to climate change. We analyzed the effect of various sustainability corporate governance variables on the disclosure level of climate change governance. These variables included facts such as having a dedicated sustainability executive and board committee, the mediating effect of female representation on the board of directors, number of reporting years according to TCFD, membership in a sustainability index, MSCI ESG rating, the existence of a corporate climate transition plan, a mention of the UN Global Compact and GRI, company location, as well as company size and profitability. By adopting a multi-theoretical framework that included stakeholder theory as well the legitimacy and agency theory, the underlying research study used a sample of 100 of the largest global companies by market capitalization and their reporting for the year 2020. Based on 1,400 observations for fiscal year 2020 and using correlation analysis, univariate and linear multiple regressions, we find a positive association between having a climate transition plan in place, being a leader in sustainability according to MSCI ratings, and being a DJSI constituent and the propensity to disclose information on governance for climate change. In addition, we find a company with a dedicated sustainability executive show an increased tendency to be transparent on climate governance issues. Furthermore, having a company location in a developed country is significantly and positively associated with climate change governance. Surprisingly, gender diversity in the corporate board or having a sustainability board committee did not show any significant correlation between a higher climate change governance level. The same was true for companies being active in either the extractive or non-extractive sector. Companies referring to the Global Reporting Initiative (GRI) or UN Global Compact also did not score higher in climate change governance. Neither did corporate profitability or size play a significant role. Our results are robust to variations and provide valuable insights for researchers, academics, executives, practitioners as well as regulators. As more and more companies are shifting towards a climate change reporting framework, it is of paramount importance that we are able to determine the contributing variables that lead to effective climate change corporate governance. Our results are inconsistent with stakeholder theory and are strongly suggesting that a diversified board and the existence of a sustainability committee that meets often/sufficiently may not necessarily lead to a higher level of transparency/quality regarding climate change. While more research is needed, knowing that a dedicated sustainability executive as well as having a climate plan in place can make a difference in climate change reporting, can be very beneficial to many corporate stakeholders. Given the current urgent climate change situation and the crucial role that corporation play in it, dedicated sustainability positions and committees need to be established. The findings could be useful for managers as well as governmental standards setter and regulators who are interested in improving corporate practices dealing with climate change. This study applies STATA software with various regression models to empirically test the relationship between CG and other variables and corporate climate change reporting.

A large share of the reinforced concrete (RC) building stock in Mediterranean countries faces a dual challenge of seismic vulnerability and energy inefficiency, calling for urgent renovation efforts. While energy upgrades have been the focus of previous renovation policies, recent research highlights the critical need for integrated retrofitting solutions that address both structural integrity and energy performance. Multi-criteria decision-making (MCDM) approaches are a promising tool for optimizing the combined choice of these integrated interventions, considering various decision variables (DVs) of economic, social, environmental, and technical nature. To understand the impact of climate and seismic hazard conditions on multi-criteria-based retrofitting assessment, a case-study RC school building is selected and assumed to be located in three distinct climate conditions, cold, mild, and warm, and three seismic hazard levels, low, medium and high. Moreover, given the complexity and challenges of quantifying seismic performance metrics for practitioners, an available simplified (practice-oriented) approach is compared herein with a more thorough research-based one for quantifying the seismic performance of RC buildings within the MCDM framework. Both approaches are applied to the case-study building, considering twelve possible combinations of energy and seismic interventions. The accuracy of the practice-oriented approach and its impact on the retrofitting rankings is evaluated, emphasizing the importance of accessible and efficient evaluation methods in facilitating informed decision-making for building renovation

Hydrodynamic modeling and hazard mapping are essential tools for urban flood mitigation and spatial planning. Leveraging software like HEC-RAS (Hydrologic Engineering Center - River Analysis System) and ArcGIS, this study aimed to map flood-prone areas along the Jijia River in the Ungheni administrative unit of Iasi County. Human-induced environmental changes and global climate shifts have heightened flood risks worldwide, particularly in urbanized areas. Hydrological and hydraulic modeling anticipate and assess flood events, while hydrodynamic modeling accurately simulates flow propagation, in-forming flood extent, timing, and volume. Flood hazard maps offer essential insights into flooded areas, water depths, and velocities, assisting in risk assessment and mitigation strategies. Through the use of different scenarios, river modeling aims to accurately replicate real-world conditions. This study focuses on Ungheni commune in Iasi County, Romania, situated along the Prut River's eastern bank. Utilizing a combination of fixed-grid and irregular mesh elements in modeling al-lows for fine-tuning of flow details and optimization of simulation times. Model accuracy, particularly regarding peak river levels, hinges on hydrograph duration. While a 30-minute error is typically accepted, greater tolerances may apply to river basins with longer response times. The extraction and processing of model results, including maximum water depths, flood extents, and velocity maps, are facilitated by ArcGIS, providing valuable data for effective flood management strategies.

Radon (²²²Rn) is the second most common type of lung cancer after smoking. As radon poses a significant risk to human health, radon-affected areas should be to ensure people’s awareness of risk and remediation. The primary goal of this research was to investigate the local natural radioactivity (in soils, water and indoors) because of the presence of tuff outcrops (from middle lower Pleistocene volcanic activity) that naturally produce radioactive gas radon at Cerveteri (Rome, Central Italy). The study area is characterized by the presence of several funerary sites pertaining to the Etruscan Necropolis of Cerveteri, which extends over a volcanic rock plateau. The results of the radon survey highlighted moderate (>16000 Bq/m³) but localized anomalies in soils and medium low (< 200 Bq/m³) values of indoor radon excepting some cases exceeding the threshold (> 300 Bq/m³) recommended by 2013/59 Euratom Directive. Although for thoron (²²⁰Rn) effects on human health, there exist no clinical data, the study of ²²⁰Rn average activity concentration in the soil gas survey has revealed new insights for the interpretation of radon sources that can affect dwellings, even taking into account the considerable difference in the half-lives of the ²²²Rn and ²²⁰Rn.

The greenhouse gases and air pollution generated by extensive energy use have exacerbated climate change. An electric-bus (e-bus) transportation system favors reducing pollution and carbon emissions. This study analyzed the minimization of construction costs for an all battery-swapping public e-bus transportation system. A simulation was conducted according to existing timetables and routes. Daytime charging was incorporated during the hours of operation; the two parameters of the daytime charging scheme were the residual battery capacity and battery-charging energy during various intervals of daytime peak electricity hours. The parameters were optimized using three algorithms: particle swarm optimization (PSO), a genetic algorithm (GA), and a PSO–GA. This study observed the effects of optimization on cost changes (e.g., number of e-buses, on-board battery capacity, number of extra batteries, charging facilities, and energy consumption) and compared the plug-in and battery-swapping e-bus systems. The results revealed that daytime charging can reduce the construction costs of both systems. In contrast to the other two algorithms, the PSO–GA yielded the most favorable optimization results for the charging scheme. Finally, according to the cases investigated and the parameters of this study, the construction cost of the plug-in e-bus system was lower than that of the battery-swapping e-bus system.

Suppose for n∈ ℕ, set A⊆ℝⁿ and function f∶A→ℝⁿ. If set A, using the Hausdorff outer measure, is measurable in the sense of Carathèodory; we want to find an extension of the expected value, w.r.t the Hausdorff measure, that's unique, finite and "natural" (defined on §2.3 & §2.4) for all f in a prevalent subset of ℝᴬ. The issue is current extensions of the expected value are finite for all functions in only a shy subset of ℝᴬ. The reason this issue wasn't resolved is mathematicians have not thought of the problem, focusing on application rather than generalization. Despite the lack of potential use, we'll attempt to solve the problem by defining a choice function---this shall choose a unique set of equivalent sequences of sets (Fₖ***) , where the set-theoretic limit of Fₖ*** is the graph of f; the measure Hʰ is the ℎ-Hausdorff measure, such for each k∈ℕ, 0 < Hʰ(Fₖ***) < +∞; and (fₖ*) is a sequence of functions where {(x,fₖ*(x))∶x∈ dom(Fₖ***)}=Fₖ***. Thus, the extended expected value of or E**[f,Fₖ***] is: ∀(ε>0)∃(N∈ℕ)∀(k∈N)(k≥N⇒1/Hʰ(dom(Fₖ***))∫dom(Fₖ*** )fₖ* dHʰ - E**[f,Fₖ***]<ε ) which should be unique, finite, and "natural" (defined on §2.3 & §2.4) for all f in a prevalent subset of ℝᴬ. Note we guessed the choice function using computer programming but we don’t use mathematical proofs due to the lack of expertise in the subject matter. Despite this, the biggest use of this research is the extension of the expected value is finite for "almost all" functions: this is easier to use in application when finding the "average" of functions covering an infinite expanse of space.

In China, the majority of mountainous regions are characterized by complex topography and a delicate, sensitive geological environment. Coupled with a generally underdeveloped infrastruc-ture and numerous unreasonable human engineering activities, these regions are often highly susceptible to geological disasters. Geological hazards can cause significant damage to human lives and property, impeding the development of mountainous areas. Consequently, researching the assessment of geological hazard vulnerability is crucial for disaster prevention, emergency management, and economic development in these regions. This study focuses on Xuanwei City and selects eight factors for evaluation, including elevation, gradient, slope aspect, normalized vegetation index, stratigraphic lithology, distance from faults, distance from rivers, and distance from roads. These factors are chosen based on a comprehensive analysis of the spatial and tem-poral distribution of geological hazards and disaster incubation conditions. Two paired models, the deterministic coefficient model + logistic regression model (CF+LR) and the information quan-tity model + logistic regression model (I+LR), were employed to quantitatively assess the study ar-ea. The accuracy of these models was evaluated using ROC curves and AUC values. The results indicate that: (1) The AUC values for the CF+LR and I+LR coupled models are 0.799 and 0.772, respectively, demonstrating that both models can objectively and reliably assess the vulnerability to geological hazards in the study area; (2) Based on the CF+LR model calculations, the geological hazard susceptibility of Xuanwei City can be categorized into four zones: extremely high suscepti-bility (6.09%), high susceptibility (31.08%), medium susceptibility (32.26%), and low susceptibility (30.57%); (3) The CF+LR model more accurately represents the evaluation results and offers a strong reference value.

We propose a novel approach to quantum theory construction that involves solving a maximization problem on the Shannon entropy of all possible measurements of a system, relative to its initial preparation. This maximization problem is additionally constrained by a phase condition that vanishes under measurements. Specifically, enforcing a vanishing U(1)-valued phase constraint leads to standard quantum mechanics, while a vanishing Spin^c(3,1)-valued phase constraint extends the theory to relativistic quantum mechanics and to quantum gravity. The latter scenario is found to incorporate the SU(3)xSU(2)xU(1) symmetries of the Standard Model as invariants of the probability measure itself, and to construct the metric tensor as an operator via a double-copy mechanism applied to Dirac currents. Significantly, this solution is consistent exclusively with a 3+1-dimensional spacetime configuration---all other dimensional settings are shown to lead to fundamental obstructions. This framework seamlessly integrates fundamental concepts from quantum mechanics, relativistic quantum mechanics, quantum gravity, the dimensional specificity of spacetime, and particle physics symmetries as the solution to a simple entropy maximization problem.

In this study, we define screening maps for Italy that classify sites based on their potential for triggering landslides. To this end, we analyze seismic hazard maps and hazard disaggregation results on a national scale considering four spectral periods (0.01s, 0.2s, 0.5s, and 1.0s) and three return periods (475, 975, and 2475 years). First, joint distributions of magnitude (M) and distance (R) from hazard disaggregation are analyzed by means of an innovative approach based on image processing techniques to find all modal scenarios contributing to the hazard. In order to obtain the M-R scenarios controlling the triggering of earthquake-induced landslides at any computation node, mean and modal M-R pairs are compared to empirical curves defining the M-R bounds associated with landslide triggering. Three types of landslides are considered (i.e., disrupted slides and falls, coherent slides, and lateral spreads and flows). As a result, screening maps for all of Italy showing the potential for triggering landslides based on the level of seismic hazard are obtained. The maps and the related data are freely accessible at the following web address: https://distav.unige.it/rsni/slideq.php.

Abstract Natural disasters such as earthquakes have affected urban historical centers severely. Considering the limitations of the existing methods in conservation and preservation of these sensitive areas, and recent advances in technological devices and techniques such as GIS and 3D printers, this article aims to propose a new methodology utilizing available knowledge and resources. The authors of the present research propose an innovative, technological, and highly accurate method to assess the seismic vulnerability of historical contextures rectifying the existing obstacles and limitations. Through this methodology, the level of trial and error is substantially reduced and the output is stronger, more optimized and more conservative as compared with commonly used methods. Using high tech principles and theoretical foundations (i.e. sustainability principles) this method achieves updated analyses, practical plans, and economic optimization.

In the context of rapid urbanization, the spatiotemporal patterns of socio-economic exposed to high seismic hazard in large cities lacks quantitative assessment, thus, it is difficult to understand the evolution of earthquake catastrophe risk there. In this paper, exposure change rate, and absolute and relatively exposure indices were proposed to quantitatively study the changes of spatiotemporal exposure to high seismic hazard in urban areas of large cities (i.e., permanent residents in urban areas more than 1 million) in Chinese mainland, using a set of multi-temporal population, GDP, and built-up datasets and a seismic hazard zoning map. The results show that, 64 out of 78 large cities are entirely or partially located in high seismically hazardous zones. Although the urban areas of large cities in high seismically hazardous zones (HSHUAs) cover only 1.73% (167177 km²) of mainland China, their share of population, GDP, and built-up land amounted to 18.14%, 30.24% and 24.55%, respectively, in 2015. Unprecedented urbanization has led to a dramatic exposure growth in HSHUAs between 1990 and 2015. The population, GDP, and built-up land in HSHUAs increased by 110 million people (with an average annual growth rate of 2.37%), 273.71 trillion USD(average annual growth rate of 11.15%), and 10593 km2 (average annual growth rate of 2.02%), respectively. HSHUAs experienced much faster population and GDP growth than the whole country, while relatively slower growth in built-up land. Exposure growth in HSHUAs also was varied for different types of large cities. Megacities had a higher proportion of increased GDP and population in HSHUAs, induced by industry and population agglomeration. Whereas, Type II large cities had a higher proportion of increased built-up land in HSHUAs, driven mainly by urban sprawl. Our analysis indicates that, for large cities under rapid urbanization, it is an urgent need to strengthen resilient urban planning, renewal and construction.

Additive manufacturing, commonly referred to as 3D printing, is an exciting and versatile manufacturing technology that is gaining traction and interest in both academic and industrial settings. Polymeric materials are essential components in a majority of the “inks” used across the various 3D printing technologies. As the environmental ramifications of sole or primary reliance on petrochemicals as a resource for industrial polymers continue to manifest themselves at a global scale, a transition to more sustainable bioderived alternatives could offer solutions. In particular, cellulose is promising due to its global abundance, biodegradability, excellent thermal and mechanical properties, and ability to be chemically modified to suit various applications. Thus far, cellulose has typically been incorporated in additive manufacturing applications as a substrate, filler, or reinforcement for other materials. However, due to its versatility and desirable properties, the exploration of all-cellulose 3D printing materials and associated methodologies is increasing. This review will discuss the progress and status of all-cellulose 3D printing approaches, associated challenges, and their potential as a key player in a more sustainable industrial future.

The scheme to realize high speed (~250Gb/s) all-optical Boolean logic gates using semiconductor optica amplifiers with quantum-dot (QD-SOA) is introduced and analyzed in this review. Numerical simulation method was presented by solving the rate equation and taking into account nonlinear dynamics including carrier heating and spectral hole-burning. Binary phase shift keyed (BPSK) signal and on-off keyed signal are used to generate high speed all-optical logic gates. The applications based on all-optical logic gates such as, all-optical latches, pseudo random bit sequence (PRBS) generation and all-optical encryption, are also discussed in this review. Results show that the scheme based on QD-SOA is a promising method for the realization of high speed all-optical communication system in the future.

A systematic study has been conducted on barbiturate complexes of all five alkali metals Li–Cs prepared from the metal carbonates or hydroxide in aqueous solution without other potential ligands present, varying the stoichiometric ratio of metal ion to barbituric acid (BAH). Eight polymeric compounds (two each for Na, K, and Rb and one each for Li and Cs) have been characterised by single-crystal X-ray diffraction. All contain some combination of barbiturate anion BA− (necessarily in a 1:1 ratio with the metal cation M+), barbituric acid, and water. All organic species and water molecules are coordinated to the metal centres via oxygen atoms as either terminal or bridging ligands. Coordination numbers range from 4 (for the Li complex) to 8 (for the Cs complex). Extensive hydrogen bonding plays a significant role in all the crystal structures, almost all of which include pairs of N–H…O hydrogen bonds linking BA− and/or BAH components into ribbons extending in one dimension. Factors influencing the structure adopted by each compound include cation size and reaction stoichiometry as well as hydrogen bonding.

In this work, we treat a prediction problem via the conditional hazard function of a scalar response variable Y given a functional random variable X by using the local linear technique. The main purpose of this paper is to investigate the asymptotic normality of the nonparametric estimator of the conditional hazard function, under some general conditions. A simulation study, conducted to assess finite sample behavior, demonstrates the superiority of our method than the standard kernel method

Background: Both hypertension and carotid atherosclerosis are independent risk factors for cardiovascular disease. Understanding their combined impact could enhance risk assessment and management strategies. Hypothesis: We hypothesized that the synergistic effects of hypertension and carotid plaques would increase the risk of both cardiovascular events and all-cause mortality. Methods: A follow-up study was conducted at the Preventive Cardiology department of Vilnius University Hospital Santaros klinikos between 2012 and 2021. The study recruited participants aged 40-60 who did not have overt CVD and were part of the Lithuanian High Cardiovascular Risk primary preventive program. The study collected demographic and clinical data, including an ultrasound assessment of carotid plaque. The participants were monitored for 4-10 years for CVD events and all-cause mortality. Results: Among 6,138 participants, 954 (16%) experienced cardiovascular disease (CVD) events. The presence of carotid plaque on both sides was significantly associated with CVD events, myocardial infarction, and all-cause mortality. However, the combination of hypertension and carotid plaque did not significantly increase the risk for CVD events, stroke, or all-cause mortality. Conclusion: The combination of hypertension and carotid plaque did not significantly increase the risk of CVD events or all-cause mortality. CV events depend on the spread of the atherosclerosis process in the carotid vessels.

Current Li battery technology employs graphite anode and flammable organic liquid electrolytes. Thus, current Li battery is always facing the problems of low energy density and safety. Additionally, sustainable supply of Li due to scarce abundance of Li sources is another problem. All-solid-state Mg battery is expected to solve the problems owing to non-flammable solid-state electrolytes, high capacity/safety of divalent Mg metal anode and high abundance of Mg sources. Therefore, solid-state electrolytes and all-solid-state Mg battery have been researched intensively last two decades. However, realization of all-solid-state Mg battery is still far. In this article, we review recent research progress on all-solid-state Mg battery so that researchers can pursue recent research trend of all-solid-state Mg battery. At first, solid-state electrolyte research is described briefly in the categories of inorganic, organic and inorganic/organic composite electrolytes. After that, the recent research progress of all-solid-state Mg battery is summarized and analyzed. To help readers, we tabulate electrode materials, experimental conditions and performances of all-solid-state Mg battery so that the readers can find necessary information at a glance. In the last, challenges to realize the all-solid-state Mg batteries are visited.

Convolution, recurrent and attention-based deep learning techniques have produced the most recent state-of-the-art results in multiple sensor-based human activity recognition (HAR) datasets. However, these techniques have high computing costs, restricting their use in low-powered devices. Different methods have been employed to increase the efficiency of these techniques; however, this often results in worse performance. Recently, pure MLP architectures have demonstrated competitive performance in vision-based tasks with lower computation costs than other deep-learning techniques. The MLP-Mixer is a pioneering pure MLP architecture that produces competitive results with state-of-the-art models in computer vision tasks. This paper shows the viability of the MLP-Mixer in sensor-based HAR. Furthermore, experiments are performed to gain insight into the Mixer modules essential for HAR, and a visual analysis of the Mixer’s weights is provided, validating the Mixer’s learning capabilities. As a result, the Mixer achieves an F1 score of 97%, 84.2%, 91.2% and 90% on the PAMAP2, Daphnet Gait, Opportunity Gestures and Opportunity Locomotion datasets, respectively, outperforming state-of-the-art models in all datasets except Opportunity Gestures.

We successfully created a composite photonic structure out of porous silicon (PSi) microcavities doped by the photochromic protein, photoactive yellow protein (PYP). Massive incorporation of the protein molecules into the pores was substantiated by a 30-nm shift of the resonance dip upon functionalization, and light-induced reflectance changes of the device due to the protein photocycle were recorded. Model calculations for the photonic properties of the device were consistent with earlier results on the nonlinear optical properties of the protein, whose degree of incorporation into the PSi structure was also estimated. The successful proof-of-concept results are discussed in light of possible practical applications in the future.

Authorities define cities – or human settlements in general – through imposing top-down rules in terms of whether buildings belong to cities. Emerging geospatial big data makes it possible to define cities from the bottom up, i.e., buildings determine themselves whether they belong to a city based on the notion of natural cities that is defined based on head/tail breaks, a classification and visualization tool for data with a heavy-tailed distribution. In this paper, we used 125 million building locations – all building footprints of America (mainland) or their centroids more precisely – to derive 2.1 million natural cities in the country (http://lifegis.hig.se/uscities/). These natural cities – in contrast to government defined city boundaries – constitute a valuable data source for city-related research.

Korenaga and coworkers present evidence to suggest that 4.3 billion years ago the Earth’s mantle was dry and water filled the ocean to twice its present volume.[2] CO₂ was constantly exhaled during the mafic to ultramafic volcanic activity associated with magmatic plumes that produced the thick, dense and relatively stable oceanic crust. In that setting two distinct major types of sub-marine hydrothermal vents were active: ~400 °C acidic springs whose effluents bore vast quantities of iron into the ocean, and ~120 °C, highly alkaline and reduced vents exhaling from the cooler, serpentinizing crust at some distance from the heads of the plumes. When encountering the alkaline effluents, the iron from the plume head vents precipitated out forming mounds likely surrounded by voluminous exhalative deposits similar to the banded iron formations known from the Archean. These mounds and the surrounding sediments likely comprising nanocrysts of the variable valence FeII/FeIII oxyhydroxide, green rust. The precipitation of green rust, along with subsidiary iron sulfides and minor concentrations of Ni, Co and Mo in the environment at the alkaline springs may have established both the key bio-syntonic disequilibria, and the means to properly make use of them – those needed to drive the essential inanimate-to-animate transitions that launched life. In the submarine alkaline vent model for the emergence of life specifically it is first suggested that the redox-flexible green rust microcrysts spontaneously formed precipitated barriers to the complete mixing of carbonic ocean and alkaline hydrothermal fluids, barriers that created and maintained steep ionic disequilibria; and second, that the hydrous interlayers of green rust acted as 'engines' that were powered by those ionic disequilibria and drove essential endergonic reactions. There, aided by sulfides and trace elements acting as catalytic promoters and electron transfer agents, nitrate could be reduced to ammonia and carbon dioxide to formate, while methane may have been oxidized to methyl and formyl groups. Acetate and higher carboxylic acids could then have been produced from these C1 molecules and aminated to amino acids, and thence oligomerized to offer peptide nests to phosphate and iron sulfides and secreted to form primitive amyloid-bounded structures, leading conceivably to protocells.

Current trends in systemic risk literature provide new insights into multi-hazard risks that interact and compound with built environments, creating more significant impacts on socio-economic and human systems. Recurrent natural hazards and extreme weather events are more likely to compound and cascade into more impactful events, especially in vulnerable societies. In small-island communities (SICS), including large archipelagos and Small Island Developing States (SIDS), the long-term impact of multi-, compounding-, and cascading-hazards (MCC hazards) can result in persistent vulnerability and residual risks. This is due to delayed responses, limited resources, poverty, fewer evacuation options, and inadequate markets and infrastructure. Using Ternate, a densely populated small volcanic island in North Maluku, Indonesia, as a case study, this paper assesses the impacts of seven types of natural hazards: flash floods, landslides, extreme weather, extreme waves and abrasion, earthquakes, tsunamis, and volcanic eruptions. The research focuses on the multi-hazard impact on population, land use, and infrastructure exposures in 60 villages in Ternate. The findings highlight population density, land use, and infrastructure exposure to multi-hazard risks, providing valuable information on potential losses in future hazard events.

Soil moisture reserve is a key factor in maintaining soil fertility and all other related ecosystem services (including carbon sequestration, soil biodiversity, soil erosion control). In semiarid blown-sand areas under aridification water preservation is a particularly crucial task for agriculture. The international Diverfarming project (2017–2022) within the EU Horizon 2020 Program focused on the impacts of crop diversification and low-input practices in all pedoclimatic regions of Europe. In the three-year experiment conducted in the Pannonian region the impacts of intercropping asparagus with different herbs on some provisioning and regulating ecosystem services were evaluated in the Kiskunság sand regions. Relying on the findings based on a range of measured physical and chemical soil parameters and on crop yields and qualitative properties, advice was formulated for farmers. The message drawn from the experiment is somewhat ambiguous. The local farmer agrees that crop diversification improves soil quality, but he denies that it would directly influence farm competitiveness, which primarily depends on cultivation costs (such as fertilization, plant protection and labour). Further analyses are needed to prove the long-term benefits of diversification through enriching soil microbial life and the possible reduction of fertilizer use while water demand is kept at a low level and the same crop quality is ensured.

In this study, Silicon Carbide (SiC) nano-particle based serigraphic printing inks were formulated to fabricate highly sensitive and wide temperature range SiC printed thermistors. Initially, commercial silver ink was screen printed to fabricate inter-digitated electrodes (IDE’s) onto flexible Kapton® substrate via screen printing. Thermistor inks with different weight ratios of SiC nano- particles dispersed in polyimide resin matrix were fabricated. The SiC-polyimide temperature sensing inks were screen printed atop the IDE structures to form fully printed thermistors and encapsulated with a adhesive backed polyimide film for humidity inhibition. The high temperature tolerance of the Kapton® allowed the the sensors to be tested over a wide temperature range form 25◦C to 170◦C. The printed SiC thermistors exhibit excellent repeatability and stability over 15 hours of continuous operation. Optimal device performance was achieved with 30 wt.% SiC-polyimide ink. We report highly sensitive devices with a temperature coefficient of Resistance (TCR) of -0.556 %/◦C, a thermal coefficient of 502 K (β-index) and an activation energy of 0.08 eV which are comparable with printed thermistors previous reported. Further, the thermistor demonstrates an accuracy of ±1.35◦C which is well within the range offered by commercially available high sensitivity thermistors. SiC thermistors exhibit a small 6.5% drift due to changes in relative humidity between 10-90 %RH and a 4.2 % drift in baseline resistance after 100 cycles of aggressive bend testing at a 40°angle. The use of commercially available low cost materials, simplicity of design and fabrication techniques coupled with the chemical inertness of the Kapton® substrate and SiC nanoparticles paves the way to use all-printed SiC thermistors towards a wide range of applications where temperature monitoring is vital for optimal system performance.

Background: All Payer Claims Databases (APCD) are a rich source of health information, however, race and ethnicity (R&E) data are largely missing. Bayesian Improved Surname Geocoding (BISG) is a common R&E imputation method, yet, validation of BISG in APCDs is lacking. We used the BISG to impute missing R&E in the Oregon APCD. Methods: BISG imputed R&E for Asian Pacific Islanders (API), Blacks, Hispanics and Whites were contrasted to the gold standard (vital statistics) and sensitivity and specificity improvements were assessed. Logistic regression examined whether missing R&E was random across patient characteristics. Results: Among 85,857 individuals in the study, 32.1% (n=27,594) had missing R&E. Missing R&E was not randomly distributed. There were higher odds of missingness among males, Whites, those age 65 and older, and commercially insured individuals. Differences in the percent missing were also found by co-morbid conditions and mortality causes. Imputing the missing R&E with BISG method improved the sensitivity to identify White, Black, API, and Hispanics. Conclusions: APCDs can benefit from enhancing missing R&E with BISG imputation to perform more robust population-health level analyses and identify inequities according to R&E without losing power or dropping non-random records with missing R&E data.

Polo is an equestrian team sport, consisting of Open and Women’s only handicapping systems. As cumulative player handicap increases in Open Polo, distance covered, average speeds and high intensity work performed per chukka also increase. These activities may differ in terms of distribution of, and their affect upon, match outcome in Women’s Polo, and thus have implications for equine preparation and management. This study aimed to quantify spatiotemporal differences between Open and Women’s Polo when matched for handicap and assess their affect upon chukka and match outcome using a prospective cohort design. Distance, speed and high intensity activity data were collected via player worn global positioning system (GPS) units during 16-goal Open and Women’s Polo tournaments. Notational analysis quantified chukka duration and chukka and game outcomes. Between group differences were assessed by independent samples t-tests, and two factor mixed effects ANOVA for within group analyses. Between group differences were analysed using an independent samples t-test with alpha defined a priori as p<0.05. Open and Women’s Polo differed by a small to large extent (ES: 0.54 – 1.81) for all spatiotemporal metrics. In Open Polo, players covered moderately more distance (429.0m; 238.9m to 619.0m), with small to large increases in high intensity activities performed in games won. Whereas in Women’s Polo, moderately higher maximum speeds were attained in games won (17.13 km/h; 11.86 km/h to 22.40 km/h) and a small increase in accelerations performed (5.1; 0.2 to 10.0). Open and Women’s Polo, when matched for handicap, present with small to large spatiotemporal differences that are likely of practical significance, and influence game outcome differently between codes. These differences do not necessarily mean that Polo ponies need to be trained differently for each code.

Hearing loss (HL) is a major clinical, population and public health leading to serious disorders and often early mortality. However, there is a significant paucity in high quality data. Saudi Arabia has a genetically uniform and young population; however factors and estimates on prevalence of HL remains unknown. Background/Objectives: we aimed to determine the frequency, factors, and patterns of HL in different regions. Methods: this study was a descriptive cross-sectional design using a web-based online public questionnaire sent out simultaneously to different regions of Saudi Arabia; namely Eastern, Western, Northen, and Southern as self-administered non-probability sample of social media users mainly WhatsApp, Twitter, and others. Results: Among 789 responses, 6.6 % reported HL, 62.4% were from the Eastern province of which 41.2% were employed and 31.7% were students. Many (36.5%) reported HL &gt; 5-years while 21.2% had programmed and fitted with hearing aids or cochlear implants implying negligence. 19.2% reported diabetes and 51.9% had family history. Ages (11– 50 years) were examined with a slight female predominance (females 59.1%, males 41%). Age was significantly associated with HL (P &lt;0.001) irrespective of gender (males 6.8%, females 6.4%, P value =0.838) reaching peaks at 17.2% in age groups 51-60 years and 25% in 71-80 indicating a risk for HL (OR = 1.43, 95% CI: 0.78-2.81, p = 0.032). Genetic diseases reported as leading cause in 34.6% (OR = 2.23, 95% CI: 1.34-3.58, p = 0.432) followed by noise (26.9%), while other factors including infections, stroke, and fevers made 19.2%. Work involving air or sea travels reported (7.7%) with no significant association (P = 0.628) while history of head injury or trauma (11.5%), or relocation between low- and high-altitudes showed 21.2%. However, frequent noise pollution (OR = 1.54, 95% CI: 0.83-3.01, p = 0.048), regular use of medications (OR = 2.15, 95% CI: 1.03-3.32, p = 0.017), and history of inflammatory disorders (OR = 0.72, 95% CI: 0.32-1.87, p = 0.229) were also associated with higher odds of HL. Conclusion: thus, these findings have significant clinical implications in early diagnosis and management of HL in genetic disorders, diabetes, geriatrics, as well as awareness on family history and occupational health and safety. The study was limited in size and use of online questionnaires. Future large cohort multicenter study would gain more insights.

Rapid Visual Screening (RVS) is a procedure that estimates structural scores for buildings and prioritize their retrofit and upgrade requirements. Despite the speed and simplicity of RVS, many of the collected parameters are non-commensurable and include subjectivity due to visual observations. It might cause uncertainties in the evaluation, which emphasizes the use of a fuzzy-based method. This study aims to propose a novel RVS methodology based on the interval type-2 fuzzy logic system (IT2FLS) to set the priority of vulnerable building to undergo detailed assessment while covering uncertainties and minimizing their effects during evaluation. The proposed method estimates the vulnerability of a building, in terms of Visual Damage Index, considering the number of stories, age of building, plan irregularity, vertical irregularity, building quality, and peak ground velocity, as inputs with a single output variable. Applicability of the proposed method has been investigated using a post-earthquake damage database of 28 reinforced concrete buildings from the Bingöl earthquake in Turkey.

Breast Angiosarcoma is a rare malignancy, accounting less than 1% of all soft tissue. It comprises primitive and secondary subtypes, such as radiogenic breast angiosarcoma (RAS). Despite the multimodal treatment, angiosarcomas represent an incurable disease for many patients and represent a cause of substantial deterioration of their quality of life. Surgery represents the cornerstone in the management, but high recurrence rates are reported. Electrochemotherapy (ECT) is practicable locoregional treatment in patients with advanced angiosarcoma, in a multimodal therapeutic strategy. ECT palliative benefit includes optimal patient compliance, good local hemostasis control, and local responses. Considering that only 22 cases are described in literature, we reported a rare case of RAS treated with ECT, after a multidisciplinary approach including Next Generation Sequencing (NGS). A literature review about the feasibility of ECT in RAS management was also performed.

Objective: ISPOR is the leading professional society for health economics and outcomes research (HEOR) globally. Recently, it launched its Women in HEOR Initiative, that aims to serve as a catalyst for women’s leadership in the field. Therefore, we were interested to find out how well ISPOR itself is doing in terms of gender diversity at their biggest conference. Methods: We used the conference programmes of ISPOR Europe conferences in 2016, 2017 and 2018 to assess the gender distribution of speakers that participated in issue panels and plenary sessions in these years. Results: 70% of all speakers (N=346) at 85 issue panels and plenary sessions during 2016, 2017, and 2018 were male. Almost one in three panels was all-male (a ‘manel’) and 64% of all panels had mostly male speakers (>50%). In contrast, only 11% of panels had <50% female speakers. Conclusion: Despite laudable effort to support the growth, development and contribution of women in HEOR through its Women in HEOR Initiative, females appear to be severely underrepresented at ISPOR’s biggest conference. ISPOR should make gender diversity a formal requirement for issue panel abstract submissions if it wants to advance women’s leadership in HEOR.

Compared with conventional semiconductors, halide perovskite nanocrystals (NCs) have a unique crystal structure and outstanding optoelectronic properties, which offer a wide potential for applications in optoelectronic devices such as solar cells, photodetectors, light emitting diodes, lasers and displays. Rational technological design is providing vital support for the development of perovskite optoelectronics. Herein, high-quality and monodisperse all-inorganic halide perovskite nanocrystals with consistent morphology, concentrated size distribution and cubic crystal phase were synthesized employing a modified one-pot hot injection method to independently modulate the stoichiometric ratios of three precursors involving cesium salt, lead source and halide. Mixing two kinds of perovskite NCs with different halogens, in combination with an anion exchange reaction, enables a transition from violet emission to green and finally to red emission over the entire visible region. Our work will be applied to enhance optoelectronic properties and stability of all-inorganic perovskite NCs for serving as light-emitting components in optoelectronic devices, as well as expanding the application areas of perovskite semiconductors for photocatalytic hydrogen generation, CO2 reduction and dye degradation.

This Thesis is concerned with one of the most promising probes to constrain the "Dark Universe", and, particularly, the dark matter distribution. Based on MICE cosmological simulation, and the all-sky convergence maps generated by Fosalba et al. [58], we perform a mass calibration of the dark matter halos there contained up to z=1. In order to do that, we analyse the average halo density proÖles of all the halos with masses ranging from 5E13 to 3.75E14 M/h , divided into four mass bins and three redshift bins. Through this analysis we address two main issues: the relatively low mass resolution of the simulation (mp=2.34E11M/h) and the relatively high softening length (lsoft=50Kpc/h). We do that by using a two-step procedure. First, we simulate analytical pure NFW density proÖles (with di§erent mass resolutions) using two input values: the virial radii of MICE halos and the expected concentrations, according to the Öxed mass-concentration relation from Oguri and Hamana [130]. Second, we model the e§ect of the softening length with a Gaussian Ölter, smoothing the halo core. The results show that MICE halos are, in average, NFW halos. Best-fit NFW radii are in very good agreement with the average radii of our samples, overestimating the data by ~1%, but best-fit NFW concentrations are in average 50% lower than the expected values. It is possible to account for part of this deviation by distinguishing between relaxed and unrelaxed halos, finding that, depending on the degree of relaxedness, the improvement can be as high as 30%. We also find that the analytical NFW halos simulated with MICE mass resolution have an overall concentration 40% lower than the input concentration, in the case of 3D proÖles, and 25% lower in that of the projected profiles. The Gaussian-smoothed NFW profile is a good approximation for our projected halos. Additionally, we analyse the morphology of the halos, characterizing their triaxiality at R200 and calculating their orientation with respect to the line-of-sight (LOS). MICE halos tend to adopt a more prolate morphology, as might be expected from a CDM simulation (Shaw et al. [159]), and the percentage of prolate halos grows as their mass grows. The mass resolution is, nonetheless, not good enough to draw conclusive inferences from the shape analysis, but it allows us to discern a trend and estimate the e§ect of halo shape and orientation on the weak lensing masses. Finally, we use the all-sky convergence maps to study the scatter in mass measurements of MICE halos. We determine the intrinsic scatter in the recovered masses by assuming the smoothed NFW profile as the 'true' profile, and creating two new convergence maps from different mass cuts. We estimate also the scatter due to the correlated structure by studying the angles between the major axes of the halos and the LOS, and also that due to projection e§ects (i.e. all the dark matter between observer and source). We Önd an irreducible scatter (intrinsic) of 10-14%, a scatter around a 30% of the intrinsic one due to correlated structure, and a scatter around 40-70% of the intrinsic one due to projection e§ects. The size of our halo sample allows us to improve the characterization of the cosmic noise, of great importance for present and future surveys.

The first part of this paper contains a brief description of the beginnings of modern cosmology, which, the author will argue, was most likely born in the Year 1912. Some of the pieces of evidence presented here have emerged from recent research in the history of science, and are not usually shared with the general audiences in popular science books. In special, the issue of the correct formulation of the original Big Bang concept, according to the precise words of Fred Hoyle, is discussed. Too often, this point is very deficiently explained (when not just misleadingly) in most of the available generalist literature. Other frequent uses of the same words, Big Bang, as to name the initial singularity of the cosmos, and also whole cosmological models, are then addressed, as evolutions of its original meaning. Quantum and inflationary additions to the celebrated singularity theorems by Penrose, Geroch, Hawking and others led to subsequent results by Borde, Guth and Vilenkin. And corresponding corrections to the Einstein field equations have originated, in particular, R², f(R), and scalar-tensor gravities, giving rise to a plethora of new singularities. For completeness, an updated table with a classification of the same is given.

We put forward a co-axial pump(optical)-probe(X-rays) experimental concept and show performance of the optical component. A Bessel beam generator with a central 100 micrometers-diameter hole (on the optical axis) was fabricated using femtosecond (fs) laser structuring inside a silica plate. This flat-axicon optical element produces a needle-like axial intensity distribution which can be used for the optical pump pulse. The fs-X-ray free electron laser (X-FEL) beam of sub-1 micrometer diameter can be introduced through the central hole along the optical axis onto a target as a probe. Different realisations of optical pump are discussed. Such optical elements facilitate alignment of ultra-short fs-pulses in space and time and can be used in light-matter interaction experiments at extreme energy densities on the surface and in the volume of targets. Full advantage of ultra-short 10 fs X-FEL probe pulses with fs-pump(optical) opens an unexplored temporal dimension of phase transitions and the fastest laser-induced rates of material heating and quenching. A wider field of applications of fs-laser-enabled structuring of materials and design of specific optical elements for astrophotonics is presented.

The development of electric aircrafts is becoming an important technology for achieving the goals set by the European Commission for the reduction of gases emissions by 2050 in the aeronautical transportation system. However, there is a gap between the values of specific power in commercial electric machines and the ones required for aeronautical applications. Therefore, the search for alternative materials and non-conventional designs is mandatory. One emergent solution is using superconducting machines and systems to overcome the current limits of conventional electrical machines. This work reviews the new hybrid and all-electric aircraft tendencies, complementing it with recent research on the design and development of high specific power superconducting machines. This includes the main topologies for hybrid and all-electric aircraft, with an overview of the ongoing worldwide projects of these types of aircrafts, systematizing the main characteristics of their propulsion systems. It also includes the research on superconducting machines for the purpose of high specific power, considering the impact on the redesign of aircraft systems in the electrical, cooling, and fuel source sense.

Coastal flooding exacerbated by climate change is recognised as a major global threat which is expected to impact more than a quarter of people currently residing in Pacific Islands countries. While most research in the last decade has focused on understanding the dynamics and impacts of future coastal flooding from extreme sea levels, relative sea level rise (RSLR) effects on tsunami hazards are not well understood. Far-field or distant-sourced tsunamis tend to have relatively lower impacts in Pacific Island states compared with locally sourced events, but there is limited understanding on how the impact of far-field tsunamis changes over time due to RSLR. Using the hydrodynamics software BG-Flood, we modelled the Tōhoku tsunami from propagation to inundation in Samoa under incremental SLR to examine the effects that RSLR has on changing the exposure of the built environment (e.g., buildings) to a far-field tsunami. Outputs of maximum tsunami inundation and flow depth intensities which incorporate incremental SLR were then combined with digital representations of buildings and depth-damage functions in the RiskScape multi-hazard risk modelling software to assess the changes in building exposure over time. Results indicate that present day buildings exposure in Samoa to a Tōhoku-oki type far-field tsunami will increase by approx. 600% with 1 m RSLR by 2080–2130, and approx. 2,350% with 2 m RSLR by 2130–2140. These findings provide a useful baseline for tsunami hazard risk assessment under changing sea level conditions in analogous island environments.

Flood events and their associated damages have escalated significantly in the last few decades. To add to the gruesome situation, many reports and studies warn that flood risk would aggravate significantly in future periods due to significant alterations in the climate patterns and socio-economic dynamics. Floodplain mapping is looked upon as a viable option to tackle this global issue as it provides both quantitative and qualitative information on flood dynamics. Moreover, with the increasing availability of global data and enhancement in computational simulations, it has become easier to simlate flooding patterns at large scales. This study deter-mines the usability of publicly available datasets in capturing flood hazards over Canada. Run-off data set from the North American Regional Reanalysis (NARR), along with a few other rele-vant inputs are fed to CaMa-Flood, a robust global hydrodynamic model to generate flooding patterns for 1 in 100 and 1 in 200-yr return period events over Canada . The simulated maps are compared and validated with the existing maps of a few flood-prone regions in Canada, thereby establishing their performance over both regional and country-scale. Later, the simulated flood-plain maps are used in conjunction with property related information at 34 cities (within the top 100 populous cities in Canada) to determine the degree of exposure due to flooding in 1991, 2001, and 2011. The results indicate that around 80 percent of inundated spots belong to high and very-high hazard classes in a 200-yr event, which is roughly 4 percent more than simulated for 100-yr event. NARR derived floodplain maps perform very well while compared over the six flood-prone regions. While analyzing the exposure of properties to flooding, we notice an in-crease in the number during the last three decades, with the maximum rise observed in Toronto, followed by Montreal, and Edmonton. To disseminate the extensive flood-related information, a web-based public tool, Flood Map Viewer (http://www.floodmapviewer.com/) is developed. The development of the tool was motivated by the commitment of the Canadian government to provide $63 M over the next three years for the completion of flood maps for higher-risk areas. The study reaches out to demonstrate how publicly available datasets can be utilized with a lesser degree of uncertainty in representing flooding patterns over large regions. The flood re-lated information derived from the study can be used along with vulnerability for quantifying flood risk, which will help in developing appropriate pathways for resilience building for long-term sustainable benefits.

This study addresses the importance of conducting mass movement susceptibility mapping and hazard assessment using quantitative techniques, including machine learning, in the Northern Lima Commonwealth (NLC). Previous exploration of the topographic variables revealed high correlation and multicollinearity among some of them, which led to dimensionality reduction through principal component analysis (PCA). Six susceptibility models were generated using weights of evidence, logistic regression, multilayer perceptron, support vector machine, random forest, and naive Bayes methods to produce quantitative susceptibility maps and assess the hazard associated with two scenarios: the first being an El Niño phenomenon and the second being an earthquake exceeding 8.8Mw. The main findings indicate that machine learning models exhibit excellent predictive performance for the presence and absence of mass movement events, as all models surpassed an AUC value of &gt;0.9, with the random forest model standing out. In terms of hazard levels, in the event of an El Niño phenomenon or an earthquake exceeding 8.8Mw, approximately 40% of the NLC area would be exposed to the highest hazard levels. It also highlights the importance of integrating methodologies to reduce model uncertainty, such as comprehensive analysis of variables supported by high quality data and organized workflows. The findings of this research are expected to serve as a supportive tool for land managers in formulating effective disaster prevention and risk reduction strategies.

In the light of almost a century of struggle to make (common) sense of Quantum Mechanics and to reconcile it with General Relativity, it is proposed to (for some time) forget about quantizing gravity or striving for one Theory of Everything or “Weltformel”, which would describe the whole of reality without any joints or suture marks. Instead of one single monolithic formalism, a three-legged compound approach is argued for. Quantum Mechanics, Relativity and Thermodynamics are proposed as the main pillars of reality, each with its well-defined realm, specific features, and clearly marked interfaces between the three of them. Not only classical reality, which is rather directly accessible to us, is then comprehensively modelled by their encompassing combination. Quantum phenomena are understood as undoubtedly lying at the bottom of classical physics and at the same time, they become “fully real” only when embedded in classical frames between preparation and measurement in time. It is then where thermodynamics steps in and provides the mediating glue. The aim of this short contribution is not to deliver novel quantitative results but rather to propose a comprehensive research program and to coarsely lay out a very roughly coherent self-referential sketch starting from the beginning of the one universe, which we inhabit.

-529391451442Citation: To be added by editorial staff during production. Academic Editor: Firstname Lastname Received: date Revised: date Accepted: date Published: date Copyright: © 2023 by the authors. Submitted for possible open access publication under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).0Citation: To be added by editorial staff during production. Academic Editor: Firstname Lastname Received: date Revised: date Accepted: date Published: date Copyright: © 2023 by the authors. Submitted for possible open access publication under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/).Abstract: SARS-CoV-2 vaccination offered the opportunity to get out of the pandemic and thereby worldwide health, social, and economic disasters. However, in addition to efficacy, safety is an important issue for any vaccine. The mRNA-based vaccine platform is considered to be safe but side effects are being reported more frequently as more and more people around the world become treated. Myo-pericarditis is the major, but not the only cardiovascular complication of this vaccine, hence it is important not to underestimate other side effects. We report a case series of patients affected by cardiac arrhythmias post mRNA vaccine from our clinical practice and the literature. Reviewing the official vigilance database emerged that heart rhythm disorders after Covid vaccination are not uncommon and deserve more clinical and scientific attention. Since Covid vaccine is the only vaccination to have been related to this side effect questions arose about whether these vaccines could affect heart conduction. Although the risk-benefit is clearly in favor of vaccination heart rhythm disorders are not a negligible issue and there are red flags in the literature about the risk of post-vaccination malignant arrhythmias in some predisposed patients. In light of these findings, we investigated the potential mechanism for the Covid vaccine to impact on cardiac electrophysiology and cause heart rhythm disorders.

As a first step a unification of the gravitational with the electromagnetic interaction within a classical framework is proposed. It is based on a V₅-geometry, with x₅ = q/m. The sole source term is mechanical stress energy, positioned along x₅. The trajectories of test-bodies are placed in V₄ (x₅ = const)-slices. The resulting field equation couples a geometric G-tensor to mechanical stress energy, its momentum with respect to V₅ and the change of this momentum with proper time τ. The following step proceeds to the quantization of space-time to enable the formalization of elementary particles und strong interaction. This is complimented by the inclusion of spin and the weak force, leading finally to a grand total equation, the stationary version of which corresponds to Schroedinger´s equation, the instationary version to the Einstein equation of General Relativity.

One of the significant challenges today in the brain-machine interface using invasive methods is the stability of the chronic record. In recent years, polymer-based electrodes have gained notoriety for achieving mechanical strength values close to that of brain tissue, promoting a lower immune response to the implant. In this work, we fabricated fully polymeric electrodes based on PEDOT:PSS for neural recording in Wistar rats. We characterized the electrical properties and both in-vitro and in-vivo functionality of the electrodes. Also, we employed histological processing and microscopical visualization to evaluate tecidual immune response in 7, 14, and 21 days post-implant days. Electrodes with 400-micrometer channels showed a 12dB signal-to-noise ratio. Local field potentials were characterized under two conditions: anesthetized and free-moving. There was a proliferation of microglia to the tissue-electrode interface in the first days, with a decrease after 14 days. Astrocytes also migrated to the interface, but there was no continuous recruitment of these cells in the tissue, showing inflammatory stability at 21 days. The signal was not affected by this inflammatory action, demonstrating that fully polymeric electrodes can be an alternative to prolong the valuable time of neural recordings.

The present paper deals with a class of even entire functions of order $\rho =1$ and genus $\vartheta =0$ of the polynomials form, \[ \sum\limits_{m=0}^\infty {\frac{\left( {-1} \right)^m\Phi ^{\left( {2m} \right)}\left( 0 \right)}{\Gamma \left( {2m+1} \right)}x^{2m}} =\Phi \left( 0 \right)\prod\limits_{k=1}^\infty {\left( {1-\frac{x}{\ell _k }} \right)} , \] where $\Phi\left( 0 \right)\ne 0$, real numbers $x$, nonnegative integers $m$, and $\ell _k \ne 0$ are all of the nonzero roots with $\sum\limits_{k=1}^\infty {1/\left| {\ell _k } \right|} <\infty $ and natural numbers $k$. We provide an efficient criterion for the polynomials with only real zeros. We also prove that the conjecture of Jensen is our special case.

The search for improved therapeutic approaches to breast cancer are still on going. Breast tumor kinase (BRK, also known as PTK6) is one of the targets, it is highly expressed in breast carcinomas while displaying low or no expression in the normal mammary gland, which hints at the oncogenic role of this enzyme in breast cancer. In these twenty years, an increasing number of studies have focused on understanding the cellular roles of BRK in breast cancers. This review outlines the advances made towards understanding the cellular and physiological role of BRK, the molecular and chemical inhibitors and its therapeutic significance in breast cancer.

During a sanitary crisis, excess mortality measures the number of all-cause deaths, beyond what we would have expected if that crisis had not occurred. The high number of COVID-19 deaths started a debate in Italy with two opposite positions: those convinced that COVID-19 deaths were not, by default, excess deaths, because many COVID-19 deaths were not correctly registered, with the most part attributable to other causes and to the overall crisis conditions, and those who presented the opposite hypothesis. We analyzed the curve of the all-cause excess mortality, during the period January 5, 2020 – August 28, 2022, compared to the curve of the daily confirmed COVID-19 deaths, investigating the association between excess mortality and the recurrence of COVID-19 waves in Italy. We compared the two curves looking for the corresponding highest peaks and we found that 5 out of the 6 highest peaks (83.3%) of the excess mortality curve have occurred, on average, just a week before the concomitant COVID-19 waves hit their highest peaks of daily deaths (Mean 6.4 days; SD 2.4 days). This temporal correspondence between the moments when the excess mortality peaked and the highest peaks of the COVID-19 deaths provides further evidence that the all-cause excess mortality wave has been mostly driven by COVID-19 deaths

Objectives To examine the comorbidity burden in patients with rheumatoid arthritis (RA) patients using a nationwide population-based cohort by assessing the Charlson Comorbidity Index (CCI), Elixhauser Comorbidity Index (ECI), Multimorbidity Index (MMI), and Rheumatic Disease Comorbidity Index (RDCI) scores and to investigate their predictive ability for all-cause mortality. Methods We identified 24,767 RA patients diagnosed between 1998–2008 in Taiwan and followed up until December 31, 2013. The incidence of comorbidities was estimated in three periods (before, during, and after the diagnostic period). The incidence rate ratios were calculated by comparing during vs. before and after vs. before the diagnostic period. One- and 5-year mortality rates were calculated and discriminated by low and high-score groups and modified models for each index. Results The mean score at diagnosis is 0.8 in CCI, 2.8 in ECI, 0.7 in MMI, and 1.3 in RDCI, and annual percentage changes are 11.0%, 11.3%, 9.7%, and 6.8%, respectively. The incidence of any increase in the comorbidity index is significantly higher in the periods of ‘during’ and ‘after’ the RA diagnosis (incidence rate ratios for different indexes: 1.33-2.77). The mortality rate significantly differs between the high and low-score groups measured by each index (adjusted hazard ratios: 2.5-4.3 for different indexes). CCI is slightly better in the prediction of 1- and 5-year mortality rates. Conclusion Comorbidities are common before and after RA diagnosis, and the rate of accumulation accelerates after RA diagnosis. All four comorbidity indexes are useful to measure the temporal changes and to predict mortality.

We present a numerical study in which large-scale bulk simulations of self-assembled DNA constructs have been carried out with a realistic coarse-grained model. The investigation aims at obtaining a precise, albeit numerically demanding, estimate of the free energy for such systems. We then, in turn, use these accurate results to validate a recently proposed theoretical approach that builds on a liquid-state theory, the Wertheim theory, to compute the phase diagram of all-DNA fluids. This hybrid theoretical/numerical approach, based on the lowest order virial expansion and a nearest-neighbor DNA model, can provide, in an undemanding way, a thermodynamic description of DNA associating fluids that is in semi-quantitative agreement with experiments. We show that the predictions of such scheme are as accurate as the ones obtained with more sophisticated methods. We also demonstrate the flexibility of the approach by incorporating non-trivial additional contributions that go beyond the nearest-neighbor model to compute the DNA hybridization free energy.

The Apennine sector formed by Sannio and Irpinia is one of the most important seismic districts in Italy, representing a good case of study due to the plenty of recorded earthquakes that have therein occurred from Roman times up to nowadays. We have merged the historical record and the new satellite techniques that allow a precise determination of ground movements, and then derived physical dimensions like strain rate. In this way, we have verified that in Irpinia the hazard of new strong shocks forty years after one of the strongest known seismic events in the district is still high. This aspect must be considered very important from many points of view, particularly for Civil Protection plans, as well as civil engineering and urban planning development.

The aim of this study is to present a method for developing fragility curves for soil liquefaction that are consistent with the seismic hazard using Monte Carlo simulation. This method can account for all the uncertainties and variabilities of the input parameters. The seismic parameters of earthquake magnitude (M) and the associated peak ground acceleration (PGA) are considered together for the liquefaction assessment. The liquefaction potential and damages obtained by this method are more realistic. A case study is performed using data from a sand-boil site in Yuanlin, Changhua county, where liquefaction occurred during the Chi-Chi earthquake in Taiwan in 1999. The results show that the liquefaction potential index, IL, the post-liquefaction settlement, St, and the liquefaction probability index, PW, are all suitable parameters for evaluating the liquefaction damages. The fragility curves for soil liquefaction developed by this method can support the performance-based earthquake engineering (PBEE) approach, provide guidance for liquefaction evaluation to the ‘Taiwan Earthquake Loss Estimation System’-TELES, and serve as a basis for scenario simulation and an earthquake early warning system for liquefaction damages.

For the Philippines, a country exposed to multiple natural hazards like severe wind, sustainable development includes resiliency. Severe wind hazard is brought by tropical cyclones in the Western Pacific, known as typhoons, that frequent the Philippines. Therefore, adequately evaluating the wind hazard and its impact is crucial for sustainable building design. Acknowledging the impacts of climate change on said hazards would require adaptation to its consequences which necessitate a deeper understanding on the changing behavior of typhoons in recent years. For this study, detailed wind information from the Japan Meteorological Agency from 1977-2021, the Holland-B parameter, and the radius of maximum wind speed for each typhoon, are determined for simulation of the regional cyclonic wind field. The analysis of the Holland-B parameters, which represent the steepness of the pressure gradient and tropical cyclone convection, suggest that the Holland-B parameters have been increasing since 2011. The regional wind fields caused by the typhoons also suggest an increasing trend in severe wind hazard. Seasonality for the location of severe wind hazard is also observed, with the Southern Philippines experiencing an increase (decrease) during the Northeast (Southwest) Monsoon season, and the Northern Philippines experiencing an increase (decrease) during the Southwest (Northeast) Monsoon season.