This study addresses the critical need for standardizing Building Information Modeling (BIM) Execution Plans (BEPs) in the Architecture, Engineering, Construction, and Operations (AECO) sector. By analyzing 36 BEP documents from international organizations, we identify key elements and propose a comprehensive framework aimed at enhancing digital transformation and collaboration in complex construction projects. This research employs scientometric analysis to map the evolution of BEP standards and integrates empirical data from industry surveys to validate the proposed framework. Our findings highlight the benefits of standardized BEPs in reducing inefficiencies and improving project outcomes, thereby providing a significant contribution to the field of BIM implementation.

Nowadays the relationship between planning land use and actual land use is not so clear in general. A lot of efforts have been put in the failures of regulation for the expansion of construction land. However, it still lacks an integrated approach to study the effectiveness of land use regulation in terms of different land use types. Furthermore, the existing evaluation of land use plan mainly focuses on a general level, a detailed research on the regulation effectiveness of each construction land use type is absent. Therefore, this research tries to evaluate regulation effectiveness of land use plan, which takes Cangwu country, Guangxi Province as an example. The finding by analysis is that the total area of construction land expansion was about 3494.73 ha, nearly 1.1 times of the plan quota. Moreover, the effectiveness differs greatly in various construction land use types. Town, industrial/mining sites can be well regulated through the quota of land use plan. While, the quota regulation system is not as effective for other type of construction land. Thus, we suggest to improve the regulation effectiveness of construction land through different plan instruments.

This longitudinal study aimed to analyze the effects of a team rowing-based training program on physical fitness and anthropometric parameters in female breast cancer survivors (n=40; 56.78±6.38 years). Participants were divided into two groups: one rowed in fixed seat rowing (FSR) boats (n=20; 56.35±4.89 years) and the other in sliding seat rowing (SSR) boats (n=20; 57.20±7.7 years). Both groups engaged in two 75-minute sessions per week for 24 weeks. Significant improvements were observed in both groups in resting heart rate (FSR: -10.65 bpm; SSR: -8.45 bpm), heart rate at the beginning of the 6-minute walk test (6MWT) (FSR: -10.7 bpm; SSR: -11.25 bpm), and heart rate at the end of the test (FSR: -13.85 bpm; SSR: -20.35 bpm). Blood pressure improved significantly in both diastolic blood pressure (FSR: -12.35 mmHg; SSR: -19.25 mmHg) and systolic blood pressure (FSR: -13 mmHg; SSR: -16.95 mmHg). Additionally, both groups increased the distance covered in the 6MWT (FSR: +63.05 m; SSR: +93.65 m). These results suggest that a rowing training program is a viable and safe activity for female breast cancer survivors, improving cardiac function, blood pressure, and cardiorespiratory capacity, particularly in sliding seat boats.

In this study, the partial least squares regression (PLSR) models were developed using no pre-processing, traditional preprocessing, multi-preprocessing 5 range, multi-preprocessing 3 range, genetic algorithm (GA), and successive projection algorithm (SPA) to assess the higher heating value (HHV) and ultimate analysis of grounded biomass for energy usage employing near-infrared (NIR) spectroscopy. A novel approach was utilized based on the assumption that using multiple pretreatment methods across different sections in the entire NIR wavenumber range would enhance the performance of the model. The performance of the model obtained from 200 biomass samples for HHV and 120 samples for ultimate analysis was compared, and the best model was selected based on the coefficient of determination of validation set, root mean square error of prediction, and the ratio of prediction to deviation values. Based on model performance results, the proposed HHV model from GA-PLSR, and the N and O models from the mul-ti-preprocessing PLSR 5 range method could be used for most applications, including research, whereas the C and H models from GA-PLSR performance is fair and applicable only for rough screening. The overall findings highlight that the multi-preprocessing 5-range method, which was attempted as a novel approach in this study to develop the PLSR model, demonstrated better accuracy for HHV, C, N, and O, improving by 4.1839%, 8.1842%, 3.7587%, and 35.9404%, respec-tively. Therefore, it can be considered a reliable and non-destructive alternative method for rap-idly assessing biomass properties for energy usage and can also be used effectively in biomass trading. However, due to the smaller number of samples used in the model development, more samples are needed to update the model for a robust application.

A non-destructive analysis of proximate parameters (moisture content, MC; volatile matter, VM; fixed carbon, FC; and ash content) for a variety of chipped and ground biomasses was investigated through a combination of thermogravimetric analysis (TGA) and near-infrared spectroscopy (NIRS) with partial least squares regression (PLSR). In this study, the thermogravimetric method was employed as a tool to determine the proximate analysis data of biomass samples through TG and DTG curves, which were generated by tracking changes in biomass mass loss over time or temperature. NIRS non−destructively scanned the chipped biomass in diffuse reflectance while ground biomass using transflectance mode, covering the wavenumber range of 3594.87 to 12,489.48 cm−1. The PLSR−based models: Full−PLSR, genetic algorithm (GA)−PLSR, successive projection algorithm (SPA)−PLSR, the spectral multi−preprocessing (MP) PLSR− 5 range method, and the MP PLSR−3 range method were developed. Model performance was assessed, compared, and selected based on the coefficient of determination in the prediction set (R2P), root mean square error in the validation set (RMSEP), and the ratio of prediction to deviation (RPD). Based on the comprehensive analysis of model performance, MC and FC models of chip biomass have demonstrated satisfactory performance which makes it applicable cautiously in any application, including research. The optimum models for MC and FC in chip biomass were constructed using GA−PLSR with 2nd derivative and Full−PLSR with a constant offset, resulting in R2P values of 0.8654 and 0.8773, RMSEP values of 0.85% and 2.12%, and RPD values of 2.9 and 3.0, respectively. Other parameters such as MC and FC in ground biomass as well as VM and ash content in both chip and ground biomass were found suitable for rough screening. The sensitivity of the selected model was assessed by calculating the limit of quantification (LOQ), and the results indicated that the calculated LOQ values for VM in both chip and ground biomass and FC in chip biomass are lower than the minimum reference values used during model development, signifying a high level of sensitivity. However, for the remaining parameters, the LOQ values surpass the established minimum reference value, suggesting the model could not predict the future samples with reference value lower than the calibration range. Nevertheless, enhancing the models by incorporation an ample number of representative biomass samples and consistently validating the models with unknown samples is imperative to ensure accurate predictions.

The ultimate analysis parameters including carbon (C), hydrogen (H), nitrogen (N), and oxygen (O) content in biomass was rarely found to be predicted by nondestructive tests until to date. In this research, we developed partial least squares regression (PLSR) models to predict the ultimate analysis parameters of chip biomass using near infrared (NIR) raw spectra of non-wood and wood samples from fast growing tree and agricultural residue and nine different traditional spectral preprocessing techniques. These techniques include first derivative (sd1), second derivative (sd2), constant offset, standard normal variate (SNV), multiplicative scatter correction (MSC), vector normalization, min-max normalization, mean centering, sd1 + vector normalization, and sd1 + MSC. Additionally, we employed a genetic algorithm (GA), successive projection algorithm (SPA), multi-preprocessing (MP) 5−range, and MP 3−range to develop a PLSR model for rapid prediction. A dataset consisting of 120 chip biomass samples was utilized for model development in which the samples was non-wood samples of 65-67% and wood samples was 33-35%, and the model performance were evaluated and compared. The selection of the optimum performing model was mainly based on criteria such as the coefficient of determination in the prediction set (R2P), root mean square error of the prediction set (RMSEP), and the ratio of prediction to deviation values (RPD). The optimal model for weight percentage (wt.%) of C was obtained using GA−PLSR, yielding R2P, RMSEP, and RPD values of 0.6954, 1.1252 wt.%, and 1.8, respectively. Similarly, for wt.% of O, the most effective model was obtained using the multi-preprocessing PLSR−5 range method with R2P of 0.7150, RMSEP of 1.3088 wt.%, and RPD of 1.9. For wt.% of N, the optimal model was obtained using the MP PLSR−3 range method, resulting in R2P, RMSEP, and RPD values of 0.6073, 0.1008 wt.%, and 1.6, respectively. However, wt.% of H model provided R2P, RMSEP, and RPD values of 0.5162, 0.2322 wt.%, and 1.5, respectively. Notably, the limit of quantification (LOQ) values for C, H, and O were lower than the minimum reference values used during model development, indicating a high level of sensitivity. However, the LOQ for N, exceeded the minimum reference value, implying the samples to be predicted by the model must be in the range of reference range in calibration set. By scatter plot analysis, the effect of combined non-wood and wood spectra of biomass chips on rapid prediction of ultimate analysis parameters using NIR spectroscopy was investigated. To include different species in a model, the species have to be not only in the different values of the constituents to make a wider range for robust model but also they must provide their trend line characteristics in the scatter plot i.e. correlation coefficient (R), slope and intercept (same slope and slope approached to 1 and intercept is same (no gap) and approached zero, high R approached to 1). The effect of the R, slope and intercept to obtain the better optimized model were studied. The results show that the different species affected model performance of each parameter prediction in a different manner and by scatter plot analysis which of these species were affecting the model negatively and how the model could be improved was indicated. This is the first time of the effect is studied by the principle of scatter plot.

This study explores the transformative potential of integrating Building Information Modeling (BIM) and Generative Design methodologies in heritage conservation and building management. By utilizing BIM, detailed architectural, structural, and MEP models were created, facilitating precise design and effective stakeholder collaboration. Generative Design enabled the exploration of multiple design solutions, optimizing spatial layouts and structural integrity. The project also integrated automated management systems and IoT sensors to enhance real-time monitoring, energy efficiency, and user comfort through the development of a digital twin. Despite encountering challenges such as technical complexities and budget constraints, the project successfully preserved the cinema's historical essence while incorporating modern functionalities. The findings highlight the contributions of BIM and Generative Design to the AEC industry, emphasizing their role in improving design accuracy, operational efficiency, and sustainability. This research provides valuable insights for future projects in heritage conservation, offering a blueprint for balancing historical preservation with contemporary needs. The revitalization of the "Ex Cinema Santa Barbara" in Paternò exemplifies these advancements, demonstrating how these technologies can restore and modernize culturally significant historical buildings effectively.

The construction sector of the Kingdom of Saudi Arabia (KSA), valued at USD 152 billion and employing 2.54 million people by 2023, is crucial to its economy. However, it faces challenges such as delays, disputes, and cost overruns. This study aims to address these issues by implementing Building Information Modeling (BIM) in the KSA, based on an extensive literature review highlighting the role and significance of BIM in mitigating construction claims. BIM improves collaboration, communication, and data integration among stakeholders. Hence, this study proposes a comprehensive BIM package framework comprising Revit Architecture, Microsoft Project, and Cost-X to reduce claims effectively. Validated through a KSA claims case study with a USD 1,870,000 claims value and 360-day delay, the BIM package significantly reduced the claims value to USD 188,000 and saved 275 days. Interview sessions were conducted to validate the effectiveness of the BIM package; 95% favored the use of BIM, 86% supported NEC4 contract adoption alongside BIM, 100% acknowledged BIM's potential in reducing design errors, 95% were confident in the case study's accuracy, and 82% were satisfied with data accuracy. This study confirms that BIM is an effective approach for minimizing construction claims in the KSA.

Students in their first year of computer science (CS1) at universities typically struggle to grasp programming concepts. This paper covers research using a Java programming language-guided visual execution environment (VEE) to teach CS1 students about programming concepts. The topics covered include input and output, conditionals, loops, functions, arrays, recursion, and files, all of which are covered in an introductory programming course. The VEE walks beginner programmers through the fundamentals of programming, utilizing visual metaphors to explain and direct interactive Java tasks. The primary goal of this study is to determine whether a cohort of 105 CS1 students from four different groups who are enrolled in two universities—one in Madrid, Spain, and the other in Galway, Ireland—can advance their programming abilities under the guidance of the VEE. Second, does the improvement vary depending on the programming concept? The findings demonstrate that students' programming knowledge has greatly increased. This improvement is significant for all programming concepts, while it is more pronounced for some topics than others, such as operators, conditionals, and loops. Additionally, it demonstrates that students had little prior understanding of files and recursion. The most well-known concept to them was the sequence concept.

Cities require flexible and participatory planning methodologies to address complex and evolving urban challenges. In Italy, the legislative framework is defined at the Regional level, according to the National laws and jurisprudence. The Lombardy region introduced the Planning Document (PD) in the Territorial Government Plan (PGT), as a strategic tool capable of adapting to changes. Based on a strategic vision, this document is useful to guide concrete actions for urban transformation, actively involving stakeholders, including citizens. The PD has the role to translate the political program into an urban planning design. So, the role it has is both technical and political. The political dimension is usually deepened in the strategic component of the document. Following the formation process of the whole city plan, the authors define the key strategies in the PD for a healthier urban future for the city of Voghera. It emerges as a balanced urban development that combines economic growth, environmental preservation, and community well-being. In the paper the authors synthesize the Voghera’s PD as an example of strategic planning that interacts with the practical planning actions and that guides both the public and the private decisions about the city development towards a healthier city.

The optimal structural design is imperative to minimize material consumption and reduce the environmental impact of construction. Given the complexity in the formulation of structural design problems, the process of optimization is commonly performed using artificial intelligence (AI) global optimization, such as Genetic Algorithm (GA). However, the integration of AI-based optimization together with visual programming (VP) in building information modeling (BIM) projects warrants further investigation. This study proposes a workflow by combining structure analysis, VP, BIM, and GA to optimize trusses. The methodology encompasses several steps including: (i) generation of parametric trusses in Dynamo VP; (ii) performing the finite element modeling (FEM) using Robot Structural Analysis (RSA); (iii) retrieving and evaluating the FEM results interchangeably between Dynamo and RSA; (iv) finding the best solution using GA; and (v) importing the optimized model into Revit, enabling the user to perform simulations and engineering analysis, such as life cycle assessment (LCA) and quantity surveying. The feasibility of the proposed workflow was tested on benchmark problems and compared with open literature. The outcomes of this study offer insight into the opportunities and limitations of combining VP, GA, FEA, and BIM for structural optimization applications, particularly to enhance structural efficiency and sustainability in construction.

The abundance of information in academic articles, reports, and studies can make it challenging for researchers to gain insights from the existing literature. To address this issue, there is a growing demand for tools that can help researchers effectively parse and analyze large volumes of data. One such tool is DataDiscoveryLab, a software system that utilizes computer vision algorithms and NLP techniques to parse academic articles into text and figures, creating three separate databases. These databases allow researchers to quickly identify articles that may be relevant to their research questions, gain a deeper understanding of the research presented, and analyze visual data. The integration of article mining and computer vision in the DataDiscoveryLab software system provides researchers with a powerful tool for navigating the vast amount of scientific literature available today. Yet, as we will discuss in the latter papers these databases’ purpose is to create a bridge between researchers’ data and practically unlimited scientific publications. Yet, in this article, we will discuss how we plan to do that, and our efforts on integrating deep learning modes. After all, unlike already existing AI models, DataDiscoveryLab can be their combination and the first Generative AI in academia that can encompass every part of the natural sciences.

Effective waste elimination is critical for the success of construction projects. Although several studies have focused on various aspects of construction waste, limited efforts have investigated the dynamic effect of Making-Do (MD) practices on productivity, rework, defects, and materials wastage. From a lean construction perspective, this study aims to address MD waste using the Last Planner System (LPS) and BIM. First, the casual structure that can cause MD in construction projects was expressed in a casual loop diagram (CLD), and thematic analysis uncovered the strategies of LPS-BIM to eliminate MD identified by reviewing the literature. Secondly, twenty-five strategies from the LPS and BIM strategies to address MD using Structural Equation Modeling (SEM) were assessed. Subsequently, a system dynamics model (SDM) for investigating LPS-BIM strategies on MD decisions in a construction project was formulated based on the underlying causal loop diagrams and the mathematical relations among the variables. Finally, the model was applied to three projects, and simulations for four LPS-BIM scenarios were carried out. The findings show that dynamic interactions among diverse production planning and control factors are critical in evaluating MD impacts on a construction project. The results demonstrate that the LPS-BIM approach resulted in an average 43.8% reduction in the tasks performed with MD, 45.3% of constraints, 66.5% of construction waste, increasing 13.7% completion rate, and 29.3% cost reduction, demonstrating that LPS-BIM as a more efficient solution for MD mitigation and construction planning.

Facility Management (FM) has increasingly focused on using Building Information Modeling (BIM) in large-scale development projects. To successfully integrate BIM in the FM sector, cooperation among different participants involved in various project stages must be improved. The objective of this digital revolution in FM is to enhance the efficacy of planning, constructing, and managing assets, benefiting all parties involved. However, the utilization of BIM in FM is limited due to factors such as incomplete owner understanding, insufficient data accessibility, and stakeholders' unfamiliarity with BIM procedures and standardization. Although the FM industry acknowledges BIM's significance, achieving successful implementation remains challenging. Facility managers lack a clear understanding of BIM's benefits in expediting operations and cost efficiency and the necessary skills for efficient utilization. To address this constraint, it is essential to develop an Employee’s Information Requirement (EIR) at the outset of a project, serving as a strategic plan and providing a comprehensive vision for all parties involved, particularly large-scale projects. Two essential technologies that facilitate the transition towards building operations are BIM and the Internet of Things (IoT). Incorporating these technologies is crucial to reducing time, expenses, and operational challenges throughout any project. The aim of this research is to create a Digital-Trio workflow, as a new expression, by providing a methodology for using facility management with BIM through the integration of EIR and IoT, maximizes the benefit of stakeholders strategically and operationally. It also explores how the preparation of the EIR by communicating with all parties will definitely improve the design process, sustainability, efficiency, cost, and time for any project, especially megaprojects.

Planning regulations determine a substantial part of buildings but their constraints are usually not included in the setup of a BIM model or used explicitly for design guidance. This is symptomatic of wider tendencies and ingrained biases that emphasize tacit knowledge and assume that information in a project starts from scratch – an assumption that runs contrary to predesign information ordering practices, as well as to the findings of creativity studies. In terms of process control, it negates important possibilities for feedforward. The paper describes an exercise in which students collected planning regulations for a particular plot of land and modelled their constraints in BIM. The results suggest that converting such information into a foundation for design is constructive and feasible, even for novices, and produce a bandwidth view of project information that acknowledges pre-existing information and includes it in the BIM workflow. They also verify that, for a large part of Dutch housing, this foundation amounts to a considerable and binding part of the design that guides subsequent decisions.

The valorization of aquaculture/fisheries processing by-products, as well as unavoidable/unwanted catches and discards in Greece is currently an underutilized activity despite the fact that there are several best practices in Northern Europe and overseas. One of the main challenges is to determine whether the available quantities for processing are sufficient to warrant valorization of discards and fish side streams. This is the first attempt to systematically record and analyze the available quantities of fish by-products and discards in Greece in a spatial and temporal way in an effort to create a national exploitation Master Plan for the valorization of this unavoidable and unwanted biomass. A thorough survey conducted within the VIOAXIOPIO project unveiled a substantial biomass of around 19,000 tonnes annually that could be harnessed for valorization. Furthermore, the production of various High Added Value Biomolecules (HAVB) was investigated, and experimental trials were conducted to assess the potential yields and the collected data were used to formulate four valorization scenarios.

This longitudinal study aimed to analyze the effects of a team rowing-based training program on physical fitness and anthropometric parameters in female breast cancer survivors (n=40; 56.78±6.38 years). Participants were divided into two groups: one rowed in fixed seat rowing (FSR) boats (n=20; 56.35±4.89 years) and the other in sliding seat rowing (SSR) boats (n=20; 57.20±7.7 years). Both groups engaged in two 75-minute sessions per week for 24 weeks. Significant improvements were observed in both groups in terms of weight (FSR: -1.93 kg, SSR: -1.75 kg), body mass index (FSR: -0.73 kg/m², SSR: -0.67 kg/m²), waist circumference (FSR: -2.83 cm, SSR: -3.66 cm), and hip circumference (FSR: -2.02 cm, SSR: -2.88 cm). Muscle strength improved in lower extremities (jump test: FSR: 2.99 cm, SSR: 3.11 cm) and upper extremities (dominant: FSR: 4.13 kgf, SSR: 4.34 kgf; non-dominant: FSR: 3.67 kgf, SSR: 3.32 kgf). Aerobic capacity also improved, with the SSR group showing a greater increase (FSR: 63.05 m, SSR: 93.65 m). Flexibility tests revealed better results in the SSR group for both dominant (SSR: 1.75 cm vs. FSR: -5.55 cm) and non-dominant limbs (SSR: 1.72 cm vs. FSR: -3.81 cm). These findings suggest that the type of rowing modality can influence physical fitness outcomes, with the SSR group showing superior improvements compared to the FSR group.

A new requirement for the manufacturing companies in Industry 4.0 is to be flexible with respect to changes in demands, requiring them to react rapidly and efficiently on the production capacities. Together with the trend to use Service-Oriented Architectures (SOA), this requirement induces a need for agile collaboration among supply chain partners, but also between different divisions or branches of the same company. In order to address this collaboration challenge, we~propose a novel pragmatic approach for the process analysis, implementation and execution. This~is achieved through sets of semantic annotations of business process models encoded into BPMN 2.0 extensions. Building blocks for such manufacturing processes are the individual available services, which are also semantically annotated according to the Everything-as-a-Service (XaaS) principles and stored into a common marketplace. The optimization of such manufacturing processes combines pattern-based semantic composition of services with their non-functional aspects. This is achieved by means of Quality-of-Service (QoS)-based Constraint Optimization Problem (COP) solving, resulting in an automatic implementation of service-based manufacturing processes. The produced solution is mapped back to the BPMN 2.0 standard formalism by means of the introduced extension elements, fully detailing the enactable optimal process service plan produced. This approach allows enacting a process instance, using just-in-time service leasing, allocation of resources and dynamic replanning in the case of failures. This proposition provides the best compromise between external visibility, control and flexibility. In this way, it provides an optimal approach for business process models' implementation, with a full service-oriented taste, by implementing user-defined QoS metrics, just-in-time execution and basic dynamic repairing capabilities. This paper presents the described approach and the technical architecture and depicts one initial industrial application in the manufacturing domain of aluminum forging for bicycle hull body forming, where the advantages stemming from the main capabilities of this approach are sketched.

The new barrier mode in Apache Spark allows embedding distributed deep learning training as a Spark stage to simplify the distributed training workflow. In Spark, a task in a stage doesn’t depend on any other tasks in the same stage, and hence it can be scheduled independently. However, several algorithms require more sophisticated inter-task communications, similar to the MPI paradigm. By combining distributed message passing (using asynchronous network IO), OpenJDK’s new auto-vectorization and Spark’s barrier execution mode, we can add non-map/reduce based algorithms, such as Cannon’s distributed matrix multiplication to Spark. We document an efficient distributed matrix multiplication using Cannon’s algorithm, which improves significantly on the performance of the existing MLlib implementation. Used within a barrier task, the algorithm described herein results in an up to 24% performance increase on a 10,000x10,000 square matrix with a significantly lower memory footprint. Applications of efficient matrix multiplication include, among others, accelerating the training and implementation of deep convolutional neural network based workloads, and thus such efficient algorithms can play a ground-breaking role in faster, more efficient execution of even the most complicated machine learning tasks

The purpose of this longitudinal study was to determine the effects of a rowing training program on physical fitness and body composition in female breast cancer survivors (56.78 ± 6.38 years). Over six months, the participants (n=40) performed two training sessions per week for an average of 75 minutes, combining resistance and muscle strength exercises with rowing. To evaluate the impact of the program, physical fitness tests and anthropometric measurements were carried out before and after the training protocol. The results show statistically significant improvements in measures such as weight (-1.84 kg), BMI (-0.7 kg/m2), hip (-3.24 cm) and waist circumference (-2.45 cm). In addition, variables associated with physical fitness also improved including leg strength (3.04 cm), dominant handgrip strength (4.24 kgf), non-dominant handgrip strength (3.49 kgf), aerobic endurance (78.35 m) and muscle flexibility (3.96 cm). We can therefore conclude that a rowing-based exercise program is an effective strategy to improve physical fitness in this type of population, yielding improvements in both anthropometric measurements and basic physical capacity variables, essential factors for better health and quality of life.

Since January, the disease caused by the Sars Cov-2 virus has spread and following pandemic. In a few months, the virus is seriously affecting the health systems of the various countries of the world and placing people in difficult psychological conditions. Few scientific resources on mental health have been published but still no one has proposed an action plan to cope the future psychological problems.This manuscript provides a plan to easily frame the priorities of mental health area related to COVID-19 to be taken into consideration which should be disseminated and that should be known by all health professionals and also by the major administrators of public health.

Abstract: Building Information Modelling (BIM) methodology has been empowering the quality of the construction activity in all sectors: multidisciplinary designs development; construction planning and monitoring; building management and maintenance. A BIM environment aggre-gates several disciplines and different professional skillsets and in order to control and improve the quality of a BIM project, a BIM manager is required. The BIM manager has the responsibility to coordinate all tasks involved in a building design and associated activities usually workout over the project documents. This professional can access to the distinct discipline models, located in a shared platform, and request for amendments if inconsistencies are detected. The topic of the present study is illustrated with three building cases were distinct specific projects, disciplines and tasks were elaborated: collaboration between disciplines (architecture, structures and con-struction); structural analyses and reinforcement details; quantity take-off of materials and cost estimation; construction scheduling and simulation. Although there are still limitations in the implementation of BIM methodology in all sectors and stages, within the construction industry, BIM has been bringing an important improvement in the quality of a building design, reflected in the quality of the final product. The present study put in evidence the BIM manager role in pro-jects that aggregates several disciplines and experts, bringing an important contribution in the quality of a building design. BIM methodology is a current demand in the construction industry supported on advanced technology and in an adequate management of projects.

This research work uses a simplified approach to combine location information from beacons propagation signal interaction with a mobile device with local building information to give real-time location and guidance to a user inside a building. This is an interactive process with visualisation information that can help user’s orientation inside unknown buildings and the data stored from different users can provide useful information about users movements inside a public building. Beacons installed on the building at specific pre-defined position emit signals that give a geographic position with an associated imprecision, related with Bluetooth’s range. This uncertainty is handled by building layout and users’ movement in a developed system that maps users’ position, gives guidance and store user movements. This system is based on an App (Find Me!) for Android OS (Operating System) which captures the Bluetooth Low Energy (BLE) signal coming from the beacon(s) and shows, through a map, the location of the user ‘s smartphone and guide him to the desired destination. Also, the beacons can deliver relevant context information. The application was tested by a panel of new and habitual campus users against traditional wayfinding alternatives yielding navigation times about 30% smaller, respectively.

Academic procrastination, more than merely postponing tasks, represents a significant failure in the self-regulation process of learning. Research on study skills highlights academic time management as one of the crucial elements of learning strategies and sustainable education. These abilities will help achieve the Sustainable Development Goals fourth goal. Therefore, this study aimed to understand how students plan time management in school activities and its influence on study procrastination, analyzing differences between genders and the hours students spend studying. The Time Management Planning Inventory, the Study Procrastination Questionnaire, and a personal and school data sheet were used. A sample of 506 students from elementary schools in northern Portugal was utilized. The results revealed that gender and study hours significantly influence how students plan time management for school tasks in the short and long term. This variable also showed a significant impact on the procrastination of study activities. The practical implications of this study are substantial, as they provide educators and researchers insights into the factors influencing academic procrastination and the role of time management planning and study hours. These insights can be applied to develop effective strategies to reduce academic procrastination and promote sustainable education.

A body plan is a stable configuration of characters for a major taxonomic group, such as chordates or arthropods. Despite widespread casual reliance on the concept for guiding comparisons within and between groups, the nature of body plans as well as the biological causes underlying their evolution have remained elusive. This paper proposes an abstract mechanistic model of body plan identity. We hypothesize that body plans are an evolutionary phenomenon that only applies to a relatively small subset of major clades, rather than being associated with each and every so-called “phylum.” Body plans arise in evolution by stepwise accretion, and require a level of developmental complexity that is only found in some animal clades. Further, we suggest that, parallel to the developmental mechanisms controlling character identity, there are “body plan identity mechanisms” (BpIMs) that maintain entire configurations of characters while possessing a mechanistic architecture that is itself stable and traceable through evolutionary change. These BpIMs, we suggest, are entrenched intercellular signaling networks operating between transient embryonic structures that are destined to differentiate into distinct individualized characters. The activity of a BpIM results in a transient long-range integration of the embryo that is highly sensitive to genetic and environmental perturbations, and that can be detected morphologically as a conserved phylotypic stage. This model is illustrated with detailed interpretations of the notochord signaling system and the segment polarity network as candidate BpIMs in vertebrates and arthropods, respectively. We conclude by contrasting the proposed developmental-mechanistic conception of body plans with the phylogenetic notion of ground plans, and sketch the general outlines of an empirical research program on body plan evolution.

Published data or available literature on sustainable building plan-design, construction, performance, and renovation criteria have covered some stages or some parts of each stage. These data usually have been published partially in many different papers―there have not been any papers that published these data together. Hence, this paper aims to collectively review these data and publish them together. The collection and review of these data were carried out by our twenty-five team members who specialized in sustainable urban, architectural, and civil engineering and construction management. The gathered and reviewed outputs were combined and validated based on a general group consensus. This consensus decision-making proceeded through two major group meetings with several follow-up meetings. The first major meeting was to combine and improve the gathered reviewed sustainable building criteria for Cambodia. The second major meeting was to validate the improved reviewed sustainable building criteria for Cambodia. The several follow-up meetings were to discuss the relevance and importance of the validated data “criteria and their classifications and descriptions” in all stages and more focused on their importance and applicability to Cambodia. The collective reviewed data in this paper would be useful to researchers in the fields. They could also be useful collective knowledge and information for policymakers from governmental agencies and development partners, particularly for sustainable building and construction companies.

A national green planning strategy has recently been introduced in the Italian urban planning sector, aimed at making all local initiatives undertaken nationwide consistent with each other. At a regional level, Friuli Venezia-Giulia has recently implemented a Landscaping Plan, which is of an urban planning and ecological nature at an intermediate level between national and local. This article describes the local green plan of Latisana, which has been entitled Ecopolitana, given that it is represents the experimental phase, at a regional level, of the possibilities offered by landscape planning and design. Specifically, it outlines the multi-disciplinary approach used, demonstrating how landscape planning can be compared to the sustainable development of cities, with specific regard to the agricultural sector. Regarding the agricultural sector, a low-intensity cropping model is also suggested, based on the principles of agroecology and landscape ecology, which has already been implemented in the historical rural landscape of Plasencis (UD) and developed through GIS analysis and remote sensing processes. Its aim is to be the starting point for the achievement of the goals set in the 2030 Agenda, and especially Goals 13 (Climate action) and 15 (Life on land), given the current scarcity of agroecological infrastructures in the area of Latisana (UD) and the high percentage of soil used for intensive cropping.

Water scarcity is a significant challenge facing Jordan today. It is a challenge in all areas that use water, and it has become certain that water is the critical factor in the population/resources equation. The water resources in Jordan have become limited with the noticeable increase in the population, mostly resulting from forced migrations in neighboring countries because of the wars and until our time. The rising natural population growth rate, along with the massive influx of refugees, has turned into a state of disproportion between the daily consumption of the population and the amount of water available. That Jordan shares most of its surface water resources with neighboring countries has exacerbated the situation. The current use of water already exceeds its renewable supply. Excessive withdrawal from aquifers, which leads to a lowering of the water table and deterioration in water quality, covered the deficit. This paper focuses on assessing the water situation in Jordan, mainly evaluating this problem and the solution being considered, the true basis for a sustainable water solution requires awareness by the population, and several governmental and non-governmental organizations are actively involved in educating residents about water shortages. The most important and 'actionable' elements of comprehensive water solutions are discussed in this paper, and these elements exist, develop extra water supplies, water harvesting, water desalination, proper wastewater reuse in the agricultural sector, and reduce the demand for drinking water. This research provides specific recommendations to address the shortage of water resources in the Kingdom and highlights the importance of water conservation and optimal use.

Highway alignment is an essential part of the highway planning and design phase. Highways are impacted by existing projects and surrounding context. The isolation of geo-technical analysis from highway planning and design also delays the planning process. This study therefore proposes a model that integrates building information modelling (BIM) and geographic information science (GIS) capabilities to facilitate the planning and design process. Semantic web technologies are used to integrate BIM and GIS data on a semantic level. The proposed model also helps to identify geohazards by providing geological analysis. The visualization of the proposed project can help reduce design errors and miscommunication, which, in turn, reduces project risk. In addition, the model facilitates highway alignment optimization by incorporating visualization, simulation, and analysis into the planning and design phase. The proposed model provides future opportunities for project professionals to have organized, reliable and dynamic ways to manage the project during construction.

Patients with low back pain often have deficits in trunk stability. For this reason, many patients receive physiotherapy treatment, which represents an enormous socio-economic burden. Training at home could reduce these costs. The prob-lem here is the lack of correction of the exercise execution. This feasibility study therefore investigates the applicability of a vibrotactile-controlled feedback system for trunk stabilization exercises. A sample of 13 healthy adults performed three trunk stabilization exercises. Exercise performance was corrected by physiotherapists using vibrotactile feedback. The NASA TLX questionnaire was used to assess the practicability of the vibrotactile feedback. The Nasa TLX questionnaire show a very low global workload M = 37.96 (SD =11.63). The quality of feedback perception was perceived as good by the subjects, varying between 76.9 % and 92.3 % depending on the body part. 80.8 % rated the feedback as helpful for their training. On the expert side, the results show a high rating of movement quality. The positive evaluations of the physiotherapists and the participants on the use of the vibrotactile feedback system indi-cate that such a system can reduce the trainees fear of independent training and support the users in their training. This could increase training adherence and long-term success.

The basal ganglia (BG) are a central component of the brain, crucial to the initiation, execution and learning of adaptive actions. The BG are the major site of the action of dopamine. An important aspect of the BG architecture is the existence of two paths, direct and indirect, having different projection targets and dopamine receptor expression. To understand the BG, dopamine, and related disorders, it is imperative to understand the two paths. The standard account used in neuroscience research for decades posits that the role of the direct path is to support movements, while that of the indirect path is to suppress unselected or completed movements. This account is contradicted by converging evidence. Here, we explain why the arguments supporting the standard account are flawed, and present a new account, in which the role of the indirect path is completely opposite: to support automated execution. During acute events, the direct path allows coarse responses. These are refined by competition, and the resulting focused response is executed and learned by the indirect path, assisted by cholinergic interneurons and the subthalamic nucleus (STN). The new account allows a novel understanding of the symptoms of Parkinson's disease, in particular tremor and rigidity, and of its treatment by STN deep brain stimulation.

The main purpose of the study was to study the effects of a specific rowing ergometer training program on the athletic performance of young adolescents (n=56; 11.73 ± 1.4 years old) com-pared to a workout based on general strength training. Eight-week training program was im-plemented, with four sessions per week and two-hours per session. Sample was divided in two groups: a control group (CG) that performed circuit training with exercises aimed at building general strength and an experimental group (EG) who focused on specifically training on a rowing ergometer (rowing machine). The data obtained in a rowing meter test over the compe-tition distance were analyzed to obtain the average power attained (W) at the beginning of the training, at the middle (4 weeks), at the end of the training (8 weeks) and one year after the ex-perimentation. The results show that, although both forms of training improve the average W obtained in both categories, the EG subjects (+29.94W) obtained better averages in all phases of the study compared to the CG (+5.88W). Furthermore, this increase was greater in male rowers (+ 34.06W) than in female rowers (+24.54W). These results reveal that a specific rower rowing ergometer training program has a significant effect than a general strength program and these effects can even be observed a year after the intervention.

In the scientific community, it is difficult to find a consensus on defining BIM. Just as the acronym BIM is developed in different ways, it is also understood in different ways. Depending on its understanding, different definitions emerge. It is defined differently by organizations and standards, still differently by academics. Many years of academic discourse on the subject have failed to produce a solution. Despite the fact that the acronym BIM has already done its work for the construction industry, it still stirs up excitement. There is still no clear definition, as the view of BIM varies from one perspective to another. This article attempts to sort out the definitions cited so far by important organizations and key academics. The review was based on deep literature study has attempted to be inclusive and consistent. The question still remains open: do we need a single, correct definition of BIM? The aim of the article is to try to answer this question, open up a renewed discussion and come to a satisfactory consensus. BIM can be identified with an activity, product or system. The article breaks down the definitions of BIM, identifies six key attributes of BIM, presents the evolution of the understanding of BIM and proposes new definitions in a narrow and broad approach.

Current bridge inspection practices rely on paper-based data acquisition, digitization, and multiple conversions in between incompatible formats to facilitate data exchange. This practice is time-consuming, error-prone, cumbersome, and leads to information loss. One aim for future inspection procedures is to have a fully digitized workflow that achieves loss-free data exchange, which lowers costs and offers higher efficiency. On the one hand, existing studies proposed methods to automatize data acquisition and visualization for inspections. These studies lack an open standard to make the gathered data available for other processes. On the other hand, several studies discuss data structures for exchanging damage information through out different stakeholders. However, those studies do not cover the process of automatic data acquisition and transfer. This study focused on a framework that incorporates automatic damage data acquisition, transfer, and a damage information model for data exchange. This enables inspectors to use damage data for subsequent analyses and simulations. The proposed framework shows the potentials for a comprehensive damage information model and related (semi-)automatic data acquisition and processing.

The Global Navigation Satellite Systems (GNSS) software-defined receivers offer greater flexibility, cost-effectiveness, customization, and integration capabilities compared to traditional hardware-based receivers, making them essential for a wide range of applications. The continuous evolution of GNSS research and the availability of new features require these software-defined receivers to upgrade continuously to facilitate the latest requirements. The Finnish Geospatial Research Institute (FGI) has been supporting the GNSS research community with its open-source implementations, such as a MATLAB-based GNSS software-defined receiver ’FGI-GSRx’ and a Python-based implementation ’FGI-OSNMA’ for utilizing Galileo’s Open Service Navigation Message Authentication (OSNMA). In this context, longer datasets are crucial for GNSS software-defined receivers to support adaptation, optimization and facilitate testing to investigate and develop future-proof receiver capabilities. In this paper we present an updated version of FGI-GSRx, namely FGI-GSRx-v2.0.0, which is also available as an open-source resource for the research community. FGI-GSRx-v2.0.0 offers improved performance as compared to its previous version, especially for the execution of long datasets. This is carried out by optimizing the receiver’s functionality and offering a newly added parallel processing feature to ensure faster capabilities to process the raw GNSS data. This paper also presents an analysis of some key design aspects of previous and current versions of FGI-GSRx for a better insight into the receiver’s functionalities. The results show that FGI-GSRx-v2.0.0 offers about 40% run time execution improvement over FGI-GSRx-v1.0.0 in case of sequential processing mode and about 59% improvement in case of parallel processing mode with 17 GNSS satellites from GPS and Galileo. In addition, an attempt is made to execute v2.0.0 with MATLAB’s own parallel computing toolbox. A detail performance comparison reveals an improvement of about 43% in execution time over v2.0.0 parallel processing mode for the same GNSS scenario.

Much of the debate on Plan S seems to concentrate on how to make toll access journals open access, taking for granted that existing open access journals are Plan S compliant. We suspected this was not so, and set out to explore this using DOAJ's journal metadata. We conclude that an overwhelmingly large majority of open access journals are not Plan S compliant, and that it is small HSS publishers not charging APCs that are least compliant and will face major challenges with becoming compliant. Plan S need to give special considerations to smaller publishers and/or non-APC-based journals.

This is a paper of Political Economy and Economic Policies into the European Green Deal framework to improve the Recovery Plan post-COVID-19. This paper is focused on the green jobs opportunity for Europe, especially for Spain. It is offered a systematization of concepts and calculations in the issue (attending the international institutions and forums proposals) to harmonize the recovery plans, to apply them beyond the energy sector and to align public and private sector, as well other key stakeholders in achieving this goal. The obtained outcome gives the creation of around 350.000 new green jobs and the necessity of a new workforce reskilled. This result makes necessary to coordinate sectoral plans by the policymakers in which all the involved entities might express their needs and views on the best education approach to renewables sector and green jobs.

The umbrella concept for the current efforts to digitize construction is known as Construction 4.0. One of its key concepts is cyber-physical systems. The construction industry is not only creating increasingly valuable digital assets (in addition to physical ones) but also the buildings and built infrastructures are increasingly monitored and controlled using digital technology. Both make construction a vulnerable target of cyber-attacks. While the damage to digital assets, such as designs and cost calculations, may result in economic damage, attacks on digitally-controlled physical assets may damage the well-being of occupants and, in worst-case scenarios, even damage (or death) to the users. The problem is amplified by the emerging cyber-physical nature of the systems, where the human checks may be left out. We propose that construction learns from the work done in the context of critical infrastructures (CI). First, a lot of CI is construction-related, and the process of designing and building it must be secured accordingly. Second, while most assets may not be critical in the CI sense, they are critical to the operations of a business and the lives of citizens. In the end, we recommend some steps so that well-established processes of critical infrastructure protection trickle down to make Construction 4.0 and the built environment more cyber-secure. With that in mind, we describe the possible inclusion of Construction 4.0 considerations into existing critical infrastructure protection (CIP) frameworks with minimum frictions. We also propose some suggestions regarding possible future courses of action to improve the increasingly vulnerable cyber-security environment of the built environment across all life cycle phases - design, construction, operation, maintenance, and end of life.

As is known, the construction industry has one of the highest occupational accidents incidence rates among all economic sectors. Currently, Building Information Modeling (BIM) appears as a tool that addresses occupational safety issues throughout the construction life cycle projects, avoiding hazards and risks and, consequently, increasing safety. This work investigates BIM methodology and related technologies application for building safety planning in construction and demonstrates the potential of this technology for the integrated implementation of safety measures during the design phase and the construction site management. The first step consisted of a literature review on the application of BIM in safety in the design and planning phases. Following, to show the potentialities of construction simulation, a case study based on BIM 4D to prevent falls from height was developed. With BIM 4D, it is possible to follow the construction process over time, giving the construction safety technicians’, designers, supervisors and managers the capability to analyse, in each phase, the potential risks and which safety measures should be implemented. BIM can effectively integrate safety measures from the design phase to the construction and use phase and do integrated safety planning within construction planning, leading to reliable safety management throughout the construction process.

The transition from Building Information Modelling (BIM) to Heritage Building Information Modelling (H-BIM) is intended to pursue an adequate knowledge of the artefact that is to be preserved, progressively replacing the traditional methods of the restoration and structural reinforcement projects with new tools for managing both existing information and new interventions. The aim of the paper is to show the application of the H-BIM method to a stone pavement road located in the Archaeological Site of Pompeii. In detail, starting from a Laser Scanner based survey, juxtaposed by coordinated points georeferenced through a total station, points clouds were handled by means of several BIM-based tools to perform the road design process, starting from the digital elevation model (DEM) to the corridor representation. Subsequently, a visual programming application based on Python language was adopted to update corridor information by means of the object property set. As preliminary results, a tool, complete with graphical and non-graphical information, is proposed to be used in conservation, maintenance and restoration project.

Building Information Modelling (BIM) methodology have been optimizing the construction activity in all sectors: multidisciplinary designs development; construction planning and monitoring; building management and maintenance. A BIM environment aggregates several disciplines and different skillsets and in order to control and improve the quality of a BIM project, a BIM manager is required. The BIM manager has the responsibility to coordinate all tasks involved in a building design and associated activities usually workout over the project documents. The professional can access to various discipline models, located in a shared board, and request for amendments if inconsistencies are detected. The present study issue is illustrated with three building cases were distinct specific projects, disciplines and tasks were elaborated: collaboration between disciplines (architecture, structures and construction); structural analyses and reinforcement details; quantity take-off of materials and cost estimation; construction scheduling and simulation. Although there are limitations in the implementation of BIM methodology in all sectors and stages, within the construction industry, BIM have been bringing an important improvement in the quality of a building design, reflected in the quality of the final product. BIM methodology is a current demand in the construction industry supported on advanced technology and in an adequate management of projects, were the BIM manager has an important role.

This paper introduces a method for tunnel point cloud and BIM model integration and cross-section monitoring, providing information to analyse tunnel cross-sections and surrounding rock deformation, and support for tunnel maintenance and reconstruction. Three types of data are processed for the integration: laser scanning point cloud, BIM tunnel model and terrain model from oblique photogrammetry. An adaptive BIM modelling scheme is proposed for tunnels with alien structures. Precise spatial registration of the data sets is conducted by applying singular value decomposition (SVD) algorithm to calculate transformation parameters from the point cloud model to the BIM model. Since the tunnel central line has high-order derivability, a cross-section calculation method based on tangent vector is proposed to obtain the cross-sectional profile of tunnels at any mileage. The proposed method has been verified by applying it to a tunnel reconstruction project. The experiment results show that the tunnel point cloud and the BIM model were highly coincident after the integration. The developed program can effectively get the cross-section of the tunnel at any mileage, and correctly express the spatial relationship between the BIM tunnel, the point cloud of tunnel and the external mountainous terrain.

The dynamic global automotive sector is characterized by an ever-evolving demand for high-quality vehicles and accessible prices. This research tackles the issue of scrap reduction in electric motor manufacturing for the automotive industry, specifically in a Chinese company, by employing the PDCA methodology. The paper delves into the company's background and current landscape, while pinpointing the problem: specific production lines segments experiencing hi-pot issues are the primary source of scrap. The overarching goal is to design and implement a strategy that, leveraging the PDCA approach, reduces scrap generated during the eight-months subassembly (armature) manufacturing process, from its current average of 2.92% to 0.7%, ultimately enabling the company to eliminate hi-pot defects.

Over the last twenty years, library publishing has emerged in higher education as a new class of publisher. Conceived as a response to commercial publishing practices that have strained library budgets and prevented scholars from openly licensing and sharing their works, library publishing is both a local service program and a broader movement to disrupt the current scholarly publishing arena. It is growing both in numbers of publishers and numbers of works produced. The commercial publishing framework which determines the viability of monetizing a product is not necessarily applicable for library publishers who exist as a common good to address the needs of their academic communities. Like any business venture, however, library publishers must develop a clear service model and business plan in order to create shared expectations for funding streams, quality markers, as well as technical and staff capacity. As the field is maturing from experimental projects to full programs, library publishers are formalizing their offerings and limitations. The anatomy of a library publishing business plan is presented and includes the principles of the program, scope of services, and staffing and governance requirements. Other aspects include production policies, financial structures, and measures of success.

The construction industry, a vital sector of the global economy, is projected to grow significantly over the next 15 years. Despite its importance, this industry struggles with inefficiency, high costs, prolonged timelines, and substantial ecological impacts. These challenges have led governments to advocate for Building Information Modeling (BIM) to enhance Efficiency and sustainability through comprehensive digital representations of physical and functional characteristics. The effective integration of BIM technology hinges on the active participation of industry providers, raising the question of how these providers can positively contribute to improving BIM dimen-sions. This study investigates the potential of coopetition networks within the Portuguese Orna-mental Stone industries (OS-PT) to address this challenge. Coopetition networks, which blend competition and cooperation, foster collaborative networks among companies to enhance their re-sponse to digital supply chains. The research employs an Experimental Pilot Network facilitated by an Industrial Internet of Things (IIoT) artefact to assess the benefits of coopetition networks. The findings demonstrate that transitioning from current practices (CB.P) to coopetition network practices (CN.P) significantly improves operational Efficiency, labour productivity, and sustaina-bility. Specifically, the transition resulted in a 15.6% increase in on-time delivery performance, a 27.38% improvement in labour productivity, and a 21.8% reduction in CO₂ emissions per part produced. These improvements align with Sustainable Development Goals (SDGs) 8, 9, 11, and 13, highlighting the strategic value of coopetition in driving innovation and sustainability in the construction industry. Future research should explore the scalability of these findings across different sectors and further refine methodologies to maximize the benefits of coopetition net-works.

The state of BIM adoption and implementation in facility management in Africa has been regarded as a developmental discourse gradually gaining grounds. While several studies have focused on manual review of the intellectual progression of BIM research, this confined review however understates the evolution of BIM in facility management. This approach therefore is not always representative of the picture of BIM in facility management at its formative stage. This paper aims to present a scientometric review of BIM in facility management exploring the intellectual progress made so far by authors. The state of the art of BIM in facility management research and practice and the challenges debilitating against BIM in facility management research. The review revealed a considerable amount of research endeavours limited by inadequate collaboration acorss organizations and institutions. The study also revealed the low degree of awareness amongst researchers in the AEC sector. While North America and China were leading countries due to the activity of few universities, Africa wasn’t as visible in research endeavours. The study recommended an increase in awareness drive across countries and increased government effort, joint funding for research to include gaps in practice issues.

The paper deals with the problem of choosing the best O&M strategy for wind power plants. Current maintenance theory considers just production opportunities and minimizes the maintenance costs, but with the liberalization of the electricity market also the electricity price has become an important variable to take into account in the O&M scheduling. Another important variables that is often neglected by the existing maintenance theory is the weather condition. This paper proposes a new strategy that takes into account the electricity price and weather conditions, improves the expected profit of the systems, and reduce the overall maintenance and logistic costs. The maintenance schedule is formalized as an optimization problem where the discounted cumulative profit of a wind generation portfolio in a fixed-time horizon (e.g. two years ahead), subject to the technologically-derived maintenance time constraints is optimized. Both the theoretical and computational aspects of the proposed O&M strategy are discussed. Results show that taking into account market and weather opportunities in the design of the maintenance strategy, it is possible to achieve a more complete scheduling for a given set of wind power plants.

The issue of when and how to return to business following COVID-19 lockdown is occupying the minds of policymakers, C-Suite executives and managers the world over. We are concerned by the extent to which it appears that these decisions are being taken on a wing and a prayer, while being pitched to the public as though they shouldn’t be questioned. In this paper, we compare the likely impact of COVID-19 infections from travellers coming from the main countries that visit Greece, to the revenues they generate for the Greek economy. We find that arrivals from some countries should be excluded but aren't, while arrivals from other countries that are excluded perhaps shouldn't be. We show that a rational choice around limitations on the reopening of tourist markets depends on the demand for travel to Greece. We conclude that the current policy is largely economically rational, with some exceptions, but also speculate that Greece may not be ready to handle the resulting infection load.

Structural design optimization (SDO) plays a pivotal role in enhancing various aspects of construction projects, including design quality, cost-efficiency, safety, and structural reliability. Recent endeavors in academia and industry have sought to harness the potential of Building Information Modeling (BIM) and optimization algorithms to optimize SDO and improve design outcomes. This review paper aims to synthesize these efforts, shedding light on how SDO contributes to project coordination. Furthermore, the integration of sustainability considerations and the application of innovative technologies and optimization algorithms in SDO necessitate more interactive early-stage collaboration among project stakeholders. This study offers a comprehensive exploration of contemporary research in integrated SDO employing BIM and optimization algorithms. It commences with an exploratory investigation, employing both qualitative and quantitative analysis techniques following the PRISMA systematic review methodology. Subsequently, an open-ended opinion survey was conducted among construction industry professionals in Europe. This survey yields valuable insights into the coordination challenges and potential solutions arising from technological shifts and interoperability concerns associated with widespread SDO implementation. These preliminary steps of systematic review and industry survey furnish a robust knowledge foundation, enabling the proposal of an intelligent framework for automating early-stage sustainable structural design optimization (ESSDO) within the construction sector. The framework ESSDO addresses the challenges of fragmented collaboration between architects and structural engineers. This proposed framework seamlessly integrates with the BIM platform, i.e., Autodesk Revit for architects. It extracts crucial architectural data and transfers it to the structural design and analysis platform, i.e., Autodesk Robot Structural Analysis (RSA), for structural engineers via the visual programming tool Dynamo. Once the optimization occurs, optimal outcomes are visualized within BIM environments. This visualization elevates interactive collaborations between architects and engineers, facilitating automation throughout the workflow and smoother information exchange.

This research delves into the integration of green roofs with Building Information Modeling (BIM), a pivotal advancement in sustainable urban construction. Aligning with the United Nations Sustainable Development Goals, particularly Goal 11, the study explores how this integration can address global challenges like climate change and resource depletion. Using the Dynamo Visual Programming Language within Autodesk Revit, the research develops a computational modeling approach for green roofs, focusing on their thermal and structural characteristics under varied environmental conditions. Key findings demonstrate the significant influence of substrate and drainage material combinations on green roofs’ thermal performance, highlighting the need for tailored designs based on climatic conditions. The study also emphasizes the importance of considering structural performance in both dry and saturated conditions for overall building integrity. The research identifies gaps in current practices, such as limited focus on specific green roof materials and reliance on certain software tools, suggesting the need for broader material selection and software adaptability. Future research directions include expanding material selections, exploring diverse environmental conditions, and integrating green roofs with various BIM software platforms. The study's implications extend to stakeholders in the construction industry, offering a framework for architects, urban planners, and policymakers to design and implement green roofs aligned with environmental goals. This work contributes to the field by proposing a novel approach to sustainable construction, integrating ecological design with digital technology, and setting a new benchmark in the integration of green roofs with BIM. By addressing these aspects, the research paves the way for future developments in sustainable urban construction, enhancing the efficiency, sustainability, and resilience of urban communities in line with global sustainability objectives.

Building Information Modelling (BIM) is increasingly adopted in supporting Facility Management (FM). However, in the future perspective of efficiently encouraging the management of building estates, e.g. owned by public authorities or institutions, providing an effective integration between Building Information Models and Geographic Information Systems (GIS) becomes also essential. This contribution is therefore aimed at presenting a methodological framework integrating BIM and GIS environments by mainly taking advantage of open-source tools (e.g. QGIS and Dynamo) and non-proprietary data exchange formats like the COBie (Construction-Operations Building Information Exchange) international standard. Unlike what has been mainly proposed in the literature concerning BIM-GIS integration so far, the methodology presented in this paper does not provide for an integral transfer of BIM data to the GIS platform. The work led instead to the development of an effective bidirectional integration between the two informative systems, by properly relating them and allowing for an easy switch from one system database to the other. This integrated framework is intended to enable facility managers to easily visualize in the GIS platform, through queryable 2D and 3D maps, some relevant information from BIM to efficiently manage workspaces. At the same time, this hybrid informative system allows BIM practitioners to access and manage more detailed information stored in Building Information Models. The findings of experimental applications of the proposed methodological approach to the ex-Macciotta pediatric hospital, a healthcare building owned by the University of Cagliari, are finally presented and discussed.

Improving the efficiency of the supply process in prefabricated components is challenging and requires accounting for a variety of risks involved in the management of the suppliers. The purpose of this study is to present a method to account for the systematic trade-offs between several supplier alternatives. A novel framework is presented for the whole assessment of supplier alternatives by taking advantage of the information extracted from customized building information modeling (BIM) and a database required for assessment of impacts. A data library related to assessment criteria for supply alternatives is built to facilitate the storage and sharing of information. Analytic hierarchy process (AHP) is used to select the optimal supplier that is able to provide the most satisfaction for the determined criteria. The proposed framework was also illustrated by the implementation in a mega project. The study implication is that BIM-enabled supplier selection can indeed lead to more benefits and higher values for all stakeholders.

Focusing on service control factors, rapid changes in manufacturing environments, the difficulty of resource allocation evaluation, resource optimization for 3D printing services (3DPSs) in cloud manufacturing environments and so on, an indicator evaluation framework is proposed for the cloud 3D printing (C3DP) order task execution process based on a Pareto optimal set algorithm that is optimized and evaluated for remotely distributed 3D printing equipment resources. Combined with the multi-objective method of data normalization, an optimization model for C3DP order execution based on the Pareto optimal set algorithm is constructed with these agents' dynamic autonomy and distributed processing. This model can perform functions such as automatic matching and optimization of candidate services, and it is dynamic and reliable in the C3DP order task execution process based on the Pareto optimal set algorithm. Finally, a case study is designed to test the applicability and effectiveness of the C3DP order task execution process based on the analytic hierarchy process and technique for order of preference by similarity to ideal solution (AHP-TOPSIS) optimal set algorithm and the Baldwin effect.

During the European unification process, they stated the need for drawing up a common energy strategic plan that will affects electricity production system in terms of infrastructure, production and generation. The EU strategic action plans included; reduction in emissions, an increase in renewable energies, energy efficiency. In this light therefore the energy efficiency was booked for researching. This article presents an in-depth study of the challenges in transforming a functioning PMO model to an EPMO model within four electricity companies from different countries within the EU and how those challenges can be address within companies implementing same methodology to bring about electricity production efficiency. Will these identified challenges make it impossible for the companies to achieve electricity production efficiency in the transformation from PMO to EPMO? PMO has been the major methodology used by these companies. To achieve production efficiency, the need for a heavyweight methodology was identified (EPMO) and implemented in four mega electricity producing companies with cross boarder distributions, one from France; Germany; Spain and UK

This work focuses on expressing the TSP with Time Windows (TSPTW for short) as a quadratic unconstrained binary optimization (QUBO) problem. The time windows impose time constraints that a feasible solution must satisfy. These take the form of inequality constraints, which are known to be particularly difficult to articulate within the QUBO framework. This is, we believe, the first time this major obstacle is overcome and the TSPTW is cast in the QUBO formulation. We have every reason to anticipate that this development will lead to the actual execution of small scale TSPTW instances on the D-Wave platform.

Construction 4.0 is witnessing exponential growth in Digital Twin (DT) technology developments and applications, revolutionizing the adoption of Building Information Modelling (BIM) and other emerging technologies used throughout the lifecycle of the built environment. BIM provides technologies, procedures, and data schemas representing building components and systems. At the same time, DT enhances this with real-time data for cyber-physical integration, enabling live asset monitoring and better decision-making. Despite being in the early stages of development, DT applications have rapidly progressed in the AEC sector, resulting in a diverse literature landscape due to the various technologies and parameters involved in fully developing the DT technology. The intricate complexities inherent in digital twin advancements have confused professionals and researchers. This confusion arises from the nuanced distinctions between the two technologies, i.e., BIM and DT, causing a convergence that hinders realizing their potential. To address this confusion and lead to a swift development of DT technology, this study presents a holistic review of the existing research focusing on the critical components responsible for developing DT applications in the construction industry. The study identifies five crucial elements: technologies, maturity levels, data layers, enablers, and functionalities. Additionally, it identifies research gaps and proposes future avenues for streamlined DT developments and applications in the AEC sector. Future researchers and practitioners can target data integrity, integration and transmission, bi-directional interoperability, nontechnical factors, and data security to achieve mature digital twin applications for AEC practices. This study highlights the growing significance of DTs in construction and provides a foundation for further advancements in this field to harness its potential to transform built environment practices.

In an ever-evolving landscape of higher education institution, the College of Arts and Sciences at St. Michael's College, Iligan City, Philippines, embarked on a strategic journey to navigate the challenges and opportunities of the post-pandemic era. This study, conducted in August 2022, delves into the multifaceted dimensions of their strategic planning processes. Through qualitative methods that use intensive in-depth reviews of literature, informal interviews, observation, and thematic analysis, this research unveils a narrative of adaptation, innovation, and internationalization. It explores how the institution resiliently adapted to the COVID-19 pandemic, leveraged technological advancements to enhance educational delivery, fostered interdisciplinary collaboration at the nexus of arts and sciences, and embraced internationalization through partnerships and cultural exchange. Anchored in a robust theoretical framework, this study resonates with broader trends in higher education, echoing the global call for agile, student-centric, and forward-thinking institutions. As this institution's journey unfolds, its experiences and lessons resonate with academic leaders, administrators, faculty, students, and stakeholders, inviting reflection and dialogue on the future of higher education.

The acoustic conditions of open-plan office spaces influence wellbeing and productivity perceived by users, but with an inadequate evaluation for workspace, acoustic design in open-plan offices can be a factor that alters user performance. Such is the case in Mexico, where there are no adequate standards to evaluate specific acoustic conditions such as intelligibility. For this reason, this case study aims to evaluate different types of measurement methods for intelligibility. This study was carried out in a university in northern Mexico. The sound measurements were based on the Mexican standard for noise analysis and the ISO 3382- part 3 standards for acoustic measurements for open-plan offices. The psychoacoustic parameters evaluated were Reverberation and Intelligibility, using objective methods determined on S/N and subjective methods based on loss of consonant; where it was analyzed distance between sound source and zones classified by building design characteristics. The results indicated in which points the intelligibility effects increased, observing that Reverberation remained stable in this office, and that the subjective methods presented greater size of the measured sound effect than the objective methods. This finding establishes that subjective methods conformed to Lognormal behavior, which is applicable to other linguistic elements describing speech behavior.

Rapidly providing a definitive diagnostic test that can be used broadly by healthcare providers and members of the public in the setting of a disease emergency is critical to limit pathogen spread, develop and deploy medical countermeasures, and mitigate the social and economic harms of a serious epidemic or pandemic. There is extraordinary expertise within and outside of government working on these issues, and major accomplishments have been made to accelerate test development, expand laboratory testing capacity, and establish widespread point-of-care testing. Still, the United States does not have a plan to rapidly respond, to develop, manufacture, or deploy at national scale diagnostic testing in the earliest days of a new infectious disease crisis. Nor does the nation have a plan to sustain testing capacity at high volume over the course ofan enduring epidemic or pandemic. To address this gap, we are proposing a National Diagnostics Action Plan that describes the steps that are urgently needed to prepare for future infectious disease emergencies, as well as the actions we must take at the first signs of such events. These recommendations require substantial collaboration between the US government (USG) and the private sector to solve a series of challenges now, as well as to prepare for the massive and rapid scale-up of laboratory and point-of-care test development and testing capacity in future emergencies. The recommendations include establishing pre-event contracts; ensuring rapid access to clinical samples; creating a permanent public-private testing coordinating body to allow for rapid information sharing and improved cooperation among the USG, test developers, and clinical laboratories; and accelerating testing rollout at the beginning of an event—andthus, the effective public health management of a disease crisis. These recommendations were informed by extensive discussion with people who managed the COVID-19 and monkeypox responses, review of past reports written on diagnostic challenges, and the experiences of the authors.

Proteins are the primary effectors of function in biology, and thus complete knowledge of their structure and properties is fundamental to deciphering function in basic and translational research. The chemical diversity of proteins is expressed in their many proteoforms, which result from combinations of genetic polymorphisms, RNA splice variants and post-translational modifications. This knowledge is foundational for the biological complexes and networks that control biology, yet remains largely unknown. We propose here an ambitious initiative to define the human proteome; that is to generate a definitive reference set of the proteoforms produced from the genome. Several examples of the power and importance of proteoform-level knowledge in disease-based research are presented, along with a call for improved technologies in a two-pronged strategy to accomplish the Human Proteoform Project.

3D cell cultures have improved the evaluation of drugs for cancer therapy, due to their high similarity to solid tumors. In melanoma, autophagy appears to show a dual role depending on the progression of the disease. p62 protein has been proposed for the evaluation of autophagic flux since its expression is an indicator of the state of autophagy. Pentoxifylline (PTX) and Norcantharidin (NCTD) are drugs that have been shown to have anticancer effects in various types of cancer. In this work, B16F1 mouse melanoma cell line was used, from which two-dimensional (2D) monolayer cultures and three-dimensional (3D) organoids were carried out using the hanging drop technique. The expression of p62 was determined by western blot and immunofluorescences. Our results indicate that pentoxifylline reduces p62 expression in both types of culture. While Norcantharidin increases its expression in 3D cultures at 24 h. Therefore, these drugs could have a potential therapeutic use for the regulation of autophagy in melanoma, depending on the state of evolution of the disease.

Rebar quantity estimation is pivotal for determining the cost of construction projects and essential for bidding purposes. A bar bending schedule plays a crucial role by providing rebar information and bending instructions, facilitating efficient procurement. Traditional methods of bar bending schedules, which involve manual extraction from 2D (two-dimensional) drawings, are error-prone and hinder construction productivity. This study proposes a Building Information Modeling (BIM)-based algorithm that automates the generation of a Bar Bending Schedule (BBS) directly from the 3D (three-dimensional) BIM models, ensuring accuracy and eliminating manual errors. The effectiveness of the algorithm was verified by comparing the rebar quantities generated by the model against those derived from optimization calculations. The results demonstrated a mean absolute error of 0.017 and a mean absolute percentage error of 1.13%, validating the algorithm’s precision. Additionally, it achieved a remarkable 33.33% reduction in the manpower required for preparing BBSs, highlighting its potential to revolutionize construction workflow efficiency and accuracy.

The paper deals with the reverse engineering, namely the as built documentation of the actual construction. The input is data measured in field using geodetic methods. In addition to modern methods of surveying 3D objects, such as laser scanning, it is still necessary to use classic surveying using a total station. The bottle neck of the process is the creation of documentation of the construction, which is still created manually in the appropriate CAD/BIM software. The goal of the research was to find a method that would reduce the amount of manual work when drawing documentation in CAD/BIM to a minimum. The core of the solution is the use of a topology that interconnects the points measured in field. The entire procedure has 2 parts: 1. Creating a topo-logical drawing template in a suitable CAD/GIS software (digital sketch), 2. Adding geometry to this sketch and creating a drawing using topological codes. The method was verified in practice by applying it to several specific buildings in the Czech Republic. The practical application of the method demonstrated a 30% time saving, a reduction in work and error rate in the entire process.

Background: The effect of rice bran arabinoxylan compound (RBAC), a plant-based immunomodulator, on the quality of life (QoL) in cancer patients and underlying physiological pathways remains unclear. Trial design: The RBAC-QoL study is a double-blind, randomised, controlled pilot feasibility study. The aim is to determine RBAC’s effects on QoL and the associated action mechanisms. Primary outcomes are the EORTC QLQ-C30 functional, symptom, and global QoL scores with inflammatory, nutritional, and cytokine parameters as secondary and exploratory outcomes. Methods: Recruitment targets adults diagnosed with solid organ tumours (≥ stage II) undergoing active treatment in several outpatient centres in New South Wales, Australia. Interventions are RBAC or matched placebo at 3g/day for 24 weeks allocated through stratified randomisation with participants, oncologists, and data collectors blinded. Data is collected from five study visits six weeks apart. The trial is ongoing. An interim intention-to-treat analysis was performed using repeated measure ANOVA with pairwise comparisons where statistical significance is observed and adjusted with covariates. Results: Global QoL scores from currently available data (n = 16; RBAC = 7, placebo = 9) were statistically different between groups (F[1,8] = 8.6, p = 0.019, eta2[g] = 0.267). Pairwise comparisons found significant differences at week 6 (p = 0.032, Cohen’s d = 1.454) and marginally at week 12 (p = 0.069, d = 1.427). Age-adjusted analysis showed a continuous upward trend in QoL improvement over time with RBAC, while the placebo group did not deviate from baseline QoL. Significant elevations of serum white blood cell count (week 18) and total protein (weeks 12 and 18) were detected in the RBAC group compared to placebo. The total protein levels correlated highly with white blood cell count (Pearson’s r = 0.539, p < 0.001) and moderately with the global QoL scores (r = 0.338, p = 0.01). No intervention-related adverse events were reported in both groups. Conclusions: RBAC improves QoL beyond placebo during active cancer treatment, possibly through the immuno-nutritional pathway. These findings are preliminary but valuable for future research. Funding and registration: Daiwa Pharmaceutical Co., Ltd, Japan; BioMedica Nutraceuticals Pty Ltd., Australia. ANZCTR Reg No: ACTRN12619000562178p.

With the advent of digitization, the integration of advanced technologies in operations and projects across all sectors is in progress. Accordingly, efforts are being made to utilize cutting-edge technologies to improve the circularity of the built environment. This study aimed to review the existing applications and limitations of building information modeling (BIM) tools for circular economy (CE) implementation from this perspective. A literature review was conducted to provide an overview of the use of BIM tools for conducting life cycle assessments, energy analysis, waste management, and formulation of material passports for buildings. It was found that BIM tools, which are available across all life cycle phases of building, have a great potential to improve the circularity of the sector. The overview provided on the use of various BIM tools may help stakeholders of the built environment understand the role of BIM for CE adoption in the sector.

Building Information Modeling (BIM) has been one of the overwhelming trends in the worldwide. In Korea, from 2012, BIM application to the public construction projects worth more than $40 million was mandated. However, despite the policy, many public owners have hesitated to apply BIM to their projects. They generally view BIM very complex to manage and difficult to understand. While there have been diverse BIM guides as a reference, most of them have developed from BIM suppliers’ perspective involving certain deficiency in meeting the public owners’ taste. The public owners have addressed the necessity for developing an owner-oriented BIM guide on which they can understand the overall BIM procurement process thereby efficiently preparing their BIM service contracts. The main objective of this study is to develop the structure and contents guidance of the new guide to be developed that follows the public business process and mitigates the deficiency. To meet the research objective, a number of domestic and international BIM guides were analyzed and workshops were operated twice with the 12 BIM experts from the Korean construction industry. As a result of the study, a four-staged guide structure was developed consisting of the BIM service Scoping, Tendering, Executing, and Wrapping-up (STEW) guides.

The integration of 3D city models with Building Information Models (BIM), abbreviated as GeoBIM, facilitates improved data support to several applications, e.g. 3D map updates, building permits issuing, detailed city analysis, infrastructure design, context-based building design, to name a few. To solve the integration, several issues need to be tackled and solved, i.e. harmonization of features, interoperability, format conversions, integration of procedures. The GeoBIM benchmark 2019, funded by ISPRS and EuroSDR, evaluated the state of implementation of tools addressing some of those issues. In particular, in the part of the benchmark described in this paper, the application of georeferencing to Industry Foundation Classes (IFC) models and making consistent conversions between 3D city models and BIM are investigated, considering the OGC CityGML and buildingSMART IFC as reference standards. In the benchmark, sample datasets in the two reference standards were provided. External volunteers were asked to describe and test georeferencing procedures for IFC models and conversion tools between CityGML and IFC. From the analysis of the delivered answers and processed datasets, it was possible to notice that while there are tools and procedures available to support georeferencing and data conversion, comprehensive definition of the requirements, clear rules to perform such two tasks, as well as solid technological solutions implementing them, are still lacking in functionalities. Those specific issues can be a sensible starting point for planning the next GeoBIM integration agendas.

The wind flow patterns and pressure distribution around a plus-shaped building are significantly influenced by the dimensions of its re-entrant corners and the overall building height. The present study aims to find the wind effects and study of the pressure distribution with different flow patterns. Plan area of the building is around 300 square meter while the height of the building is 50 meters by keeping the equal length of the re-entrant corners. The research is performed using ANSYS CFX academic version and the results are depicted in various forms such as pressure coefficient (Cpe), stream lines in both vertical as well as in specific surface and pressure contours. The analysis is carried out by varying the wind incident angles, from 0° to 90° at the interval of 15°. The building dimension are scale down to perform the test on length scale of 1:100. Since the considered building model exhibits symmetry along both the axes, present study mostly emphasis on examining re-entrant corners located in the building. This method yields valuable information about how air circulates and how pressure is distributed across a broad spectrum of wind angles. This study provides valuable insights into flow circulation and pressure distribution for a wide range of wind angles.

The purpose of this paper is to propose a tool to measure the performance of a Strategic Asset Management Plan (SAMP) based on a Balanced Scorecard (BSC). The SAMP converts organizational objectives into asset management objectives, also specifies the role of the asset management system and brings support to achieve asset management objectives. The SAMP becomes the heart of the organization and integrates with long-term, medium-term, and short-term financial plans integrated with same term activity plans. In the SAMP, the balance among performance, costs and risks is also taken into consideration in order to achieve the organization’s objectives. On the other side, the SAMP is a guide to set the asset management objectives while describing the role of the Asset Management System (AMS) in meeting those objectives. While SAMP is the central figure of AMS, it is important to measure its performance and needs to be build and improved through an iterative process, what means that is not just a document, it is “the document”, and should be treated as a “living being” that needs to adapt to internal and external changes quickly. The BSC is an excellent tool where, through the appropriate Key Performance Indicators (KPIs), the progress can be measured, and is supported by four perspectives: Financial; Customer; Internal Process; and Learning and Growth.

Object detection is one of the most critical tasks in the field of Computer vision. This task comprises identifying and localizing an object in the image. Architectural floor plans represent the layout of buildings and apartments. The floor plans consist of walls, windows, stairs, and other furniture objects. While recognizing floor plan objects is straightforward for humans, automatically processing floor plans and recognizing objects is a challenging problem. In this work, we investigate the performance of the recently introduced Cascade Mask R-CNN network to solve object detection in floor plan images. Furthermore, we experimentally establish that deformable convolution works better than conventional convolutions in the proposed framework. Identifying objects in floor plan images is also challenging due to the variety of floor plans and different objects. We faced a problem in training our network because of the lack of publicly available datasets. Currently, available public datasets do not have enough images to train deep neural networks efficiently. We introduce SFPI, a novel synthetic floor plan dataset consisting of 10000 images to address this issue. Our proposed method conveniently surpasses the previous state-of-the-art results on the SESYD dataset and sets impressive baseline results on the proposed SFPI dataset. The dataset can be downloaded from SFPI Dataset Link. We believe that the novel dataset enables the researcher to enhance the research in this domain further.

A fundamental question in biology is whether phenotypes can be predicted by ecological or genomic rules. At least five cases of convergent evolution of the crab-like body plan (with a wide and flattened shape, and a bent abdomen) are known in decapod crustaceans, and have, for over 140 years, been known as ‘carcinization’. The repeated loss of this body plan has been identified as ‘decarcinization’. In reviewing the field, we offer phylogenetic strategies to include poorly known groups, and direct evidence from fossils, that will resolve the history of crab evolution and the degree of phenotypic variation within crabs. Proposed ecological advantages of the crab body are summarized into a hypothesis of phenotypic integration suggesting correlated evolution of the carapace shape and abdomen. Our premise provides fertile ground for future studies of the genomic and developmental basis, and the predictability, of the crab-like body form.

This paper presents a new framework to classify floor plan elements and represent them in a vector format. Unlike existing approaches using image-based learning frameworks as the first step to segment the image pixels, we first convert the input floor plan image into vector data and utilize graph neural network. Our framework consists of three steps. (1) image pre-processing and vectorization of the floor plan image. (2) region adjacency graph conversion. (3) graph neural network on converted floor plan graphs. Our approach is able to capture different types of indoor elements including basic elements such as walls, doors, and symbols as well as spatial elements such as rooms and corridors. In addition, the proposed method can also detect element shapes. Experimental results show that our framework can classify indoor elements with an F1 score of 95%, with scale and rotation invariance. Furthermore, we propose a new graph neural network model that takes the distance between nodes into account, which is a valuable feature of spatial network data.

Failaka Island, located in the far east of Kuwait Bay, is about 20 km from the State of Kuwait’s coast, and represents a focal point for regional geography and history, with pristine beaches and archaeological sites dating to the Bronze, Iron, Hellenistic, Christian and Islamic periods. According to environmental data and in coordination with local authorities to develop an urban plan, the island is set to become the first tourist destination for the State of Kuwait. To achieve the Vision of Kuwait 2035, one of the planning objectives focuses around Urban Planning for the Establishment of Environmental Cities that Achieve (UPEECA) environmental sustainability criteria. The paper then, aims to propose the environmental urban plan for Failaka Island. Based around Environmental Analytical Hierarchical Processes (EAHP), and using the Field Calculator and ModelBuilder functions in ArcGIS, this research centres on the feasibility of carrying out an urban plan using suitability modelling that includes four factors and 13 criteria covering the island’s ecological and human composition. This study utilizes both remote sensing (UAVs for 3D imaging) and field study (ground truthing) to identify changes in land use and land cover – such as using sample analysis of the historical sites and soils for tracing evidence and creating/updating a soil map – and create the first GIS database for the island that can lead to generating a suitability model.

In passing maneuvers on two-lane highways, assessing the needed distance and the potential power reserve to ensure the required speed mode of the passing vehicle is a critical task of speed planning. This task must meet several mutually exclusive conditions that lead to successful maneuver. The paper addresses three main aspects. First, the issues of rational distribution of the speed of the passing vehicle for overtaking a long commercial vehicle on two-lane highways are discussed. The factors that affect maneuver effectiveness are analyzed, considering safety and cost. Second, a heuristic algorithm is then proposed based on the rationale for choosing the necessary space and time for overtaking. The initial prediction's sensitivity to fluctuations of current measurements of the position and speed of the overtaking participants is examined. Third, an optimization technique for passing vehicle speed distribution over the overtaking time using the finite element method is presented. The adaptive model predictive control is applied for tracking the references being generated. The presented model is illustrated using simulation.

Despite their limited spatial extent, freshwater ecosystems host remarkable biodiversity, including one third of all vertebrate species. This biodiversity is declining dramatically: globally, wetlands are vanishing three times faster than forests and freshwater vertebrate populations have fallen more than twice as steeply as terrestrial or marine populations. Threats to freshwater biodiversity are well- documented but co-ordinated action to reverse this decline is lacking. We present an Emergency Recovery Plan to “bend the curve” of freshwater biodiversity loss. Priorities for action include: 1) accelerating implementation of environmental flows, 2) improving water quality, 3) protecting and restoring critical habitats, 4) managing exploitation of freshwater species and riverine aggregates, 5) preventing and controlling non-native species invasions, and 6) safeguarding and restoring river connectivity. We recommend revised targets and indicators for the Convention on Biological Diversity and the Sustainable Development Goals, and investment in enabling conditions at national, river basin and local scales.

The efficiency success status of organization built environment assets management needs robust and comprehensive maintenance processes which depends on the efficiency of the contract information documents for the maintenance management within the assets life cycle and achieve positive return of the investments. Therefore, this paper highlights on the appropriate interactive approach to structuring information flow scope of the asset facilities management contract for construction projects based on GIS and BIM integration processes, sustainability standards, and As-built contractual documents of the project to support the organization owner and stakeholder to improve the asset management processes. Using expert interviews with comprehensive understand for the information type in several facility management contracts conducted in common Organization types based on reviewing available international facility management standards manual and contract of procedures for different services types, and required information flow inside international facility management firms. The study classify and build significant integrated information and data flow model contract drafting with measures and indicators of performance efficiency as guideline for monitoring, technically evaluating, and financially procedures for performance efficiency and quality of services provided in the facilities management contract for King Faisal University campus projects as a case study.

Base on building information modeling(BIM) plus with Robotic process automation (RPA) technology is rapid development in smart building operations and maintenance (O&M). RPA is a workflow-based automated execution tool that is particularly well suited for replacing manual execution of simple and repetitive tasks using computer systems. The use of RPA technology can saves man-hours and increases productivity, which is important for the automation of building operations and maintenance operations.. The BIM technology, as an advanced technology in the construction industry, it can provide new ideas and methods for building operation and maintenance based on its visualization characteristics. That’s integrating RPA with BIM technology which will enhance the digitalization and virtualization of smart building operation and management. In this article will first introduce the features of RPA and BIM technology and then discuss the technical roadmap for remote automated operation and maintenance of smart building equipment room to implemention a low-cost and high efficient building equipment room operation and maintenance solution.

Recent technological improvements have made abundant changes in construction industry. In specific, some technical applications, such as Building Information Modeling (BIM) opens up many possibilities. Some studies have articulated the use of BIM and its advantages in construction, but most of them are theoretical, not practical. This study is to provide an insight to such obstacles in BIM research. By investigating a real project that could utilize BIM in planning and construction phases, the authors try to investigate a possible outline of advantages in BIM implementation. The study area was set to a railway construction site in South Korea. The site covers a multiple railway tracks, stations, telecommunication facilities, infrastructure facilities, railway structures, and so numerous. In the site, the authors have identified 12 errors in 7 projects that could be prevented if BIM was utilized before the construction. The total upfront costs required to provide a BIM for 7 projects were $116,348. On the other hand, the total costs required to fix the errors in 7 projects were $166,486. This can be regarded as the benefits of using BIM because if BIM was implemented then the associated errors are easily replaced. Therefore, the benefit-cost ratio can be estimated as 1.32 for one-month delay and 1.36 for a three-month delay.

Building information modeling (BIM) is the digital representation of physical and functional characteristics (such as geometry, spatial relationship, and geographic information) of a facility to support decisions during its life cycle. BIM has been extended beyond 3D geometrical representations in recent years, and now includes time as a fourth dimension and cost as a fifth dimension, as well as such other applications as virtual reality and augmented reality. The Internet of Things (IoT) has been increasingly applied in various products (smart homes, wearables) to enhance work productivity, living comfort, and entertainment. However, research addressing the integration of these two technologies (BIM and IoT) is still very limited, and has focused exclusively on the automatic transmission of sensor information to BIM models. This paper describes an attempt to represent and visualize sensor data in BIM with multiple perspectives in order to support complex decisions requiring interdisciplinary information. The study uses a university campus as an example and includes several scenarios, such as an auditorium with a dispersed audience and energy saving options for rooms with different functions (mechanical/electric equipment, classrooms, and laboratory). This paper also discusses the design of a common platform allowing communication among sensors with different protocols (Arduino, Raspberry Pi), the use of Dynamo to accept sensor data as input and automatically redraw visualized information in BIM, and how visualization may help in making energy-saving management decisions.

Information regarding the cost of a construction project is available to the investor and project participants in order to determine the subsequent success of a project, given that the information they collect has an impact on the decisions they make. Cost calculations, especially in the initial phase of a project, often generate large errors. This paper presents the new approach based on a combination of the Case Based Reasoning method (CBR) with the originally selected criteria for the description of a construction project (as a result of Pearson correlation coefficient and Spearman's rank correlation coefficient) and Building Information Modeling (BIM) technology. The CBR method fulfils expectations for a simple and fast system supporting the cost estimation process. It does not require any specialist knowledge, so it will be comprehensible to cost estimation practitioners. The BIM-based model gives the opportunity for the calculation of quantity take-offs and enables the use of the information contained in the BIM model in the cost estimation process. In order to prepare the model an appropriate relational database had to be developed. With extensive research, a database of 173 construction projects, including the construction of a sports field, was obtained. There were 14 variables defined originally by authors; however, only 10 (as a result of the correlation analysis) were used for the calculation. Data related to the project were collected in the BIM model. Results estimating the project’s unit price, using the CBR method, were presented and discussed. The Mean Absolute Estimate Error was used to evaluate the model.

It is widely acknowledged that the integration of BIM and GIS data is a crucial step forward for future 3D city modelling, but most of the research conducted so far has covered only the semantic aspects of GIS-BIM integration. We present here the results of the GeoBIM project, in which we tackled three integration problems focussing instead on aspects involving geometry processing: (i) the automated processing of complex architectural IFC models, (ii) the integration of existing GIS subsoil data in BIM, and (iii) the georeferencing of BIM models for their use in GIS software. All the problems have been studied using real world models and existing datasets made and used by practitioners in the Netherlands. For each problem, we expose in detail the issues we faced, our proposed solutions, and our recommendations for a more successful integration.

Due to production space and operating environment requirements, mine production equipment often breaks down, which seriously affects the mine’s production schedule. To ensure the smooth completion of the haulage operation plan under abnormal conditions, a model of the haulage equipment rescheduling plan based on the random simulation of equipment breakdowns is established in this paper. The model aims to accomplish both the maximum completion rate of the original mining plan and the minimum fluctuation of the ore grade during the rescheduling period. This model is optimized by improving the wolf colony algorithm and changing the location update formula of the individuals in the wolf colony. Then, the optimal model solution can be used to optimize the rescheduling of the haulage plan by considering equipment breakdowns. The application of the proposed method in an underground mine revealed that the completion rate of the mine’s daily mining plan reached 83.40% without increasing the number of the equipment, while and the ore quality was stable. Moreover, the improved optimization algorithm converged fast and was characterized by high robustness.

Integration of 5D Building Information Modelling (BIM) into large rail projects has the potential to significantly enhance cost management and control. Nevertheless, 5D-BIM implementation has encountered difficulties stemming from technical, functional, and governance-related factors. This paper builds a conceptual framework to support financial decision-making, enhances project management, and promotes efficient project delivery. The framework encompasses a set of interrelated elements that include project governance, BIM policies and standards, digital platforms, BIM LOD, cost estimation classification, and continuous improvement. The proposed framework acknowledges the significance of project governance in guiding and organizing the implementation of 5D-BIM. Additionally, BIM policies and standards ensure the adherence to quality standards for the produced BIM models. Digital platforms serve as the basis for multiple users to generate, access, share, and exchange project information. BIM LOD promotes collaboration and coordination among all project stakeholders. Cost estimation classification aligns the estimation process with the development of project scope and financial decision-making. Continuous improvement plays a vital role in optimizing processes, enhancing efficiency, and achieving higher-quality outcomes. Moreover, it fosters stakeholder satisfaction, improves project performance, and nurtures a conducive environment for innovation and learning. The study analyses the framework utilization in the Victorian rail projects and identifies key implementation challenges. This can be summed up as follows: The main technical hurdles were the lack of current horizontal infrastructure standards for data exchange and the lack of compatibility with current cost management standards. Increased project complexity and the absence of clear project governance strategies and processes posed organizational challenges. A further validation of the framework in real-world rail projects was recommended to achieve the implementation goals.

The construction industry is notable contributors to atmospheric dust particulate emissions. The particulate matter (PM) produced in construction processes contains a range of chemically hazardous substances, posing significant health risks (HR) to individuals. The occupational health hazards research in construction has become a focal point of interest internationally. Initiated in the early 2000s, there has been a growing demand within the construction research community for the creation of a unified PM database that encapsulates a wide array of construction activities. Previous studies have endeavored to establish a PM database for various construction contexts, yet they have fallen short in thoroughly addressing the diversity of construction materials and the levels of toxic substances (TS) within the PM. This study validates the proof of value that HR associated with construction processes can be measured using PM and TS datasets generated from various work processes using a variety of construction materials. This was accomplished through a semi-automated Building Information Modeling (BIM)-based plugin, which streamlines the assessment of occupational HR in construction projects alongside ongoing work processes. To validate the practicality of the Health Risk Index (HRI) determination via this BIM plugin, a case study on a real renovation project was executed. This system provides construction supervisors with a tool to visually assess the HR of daily operations, thereby facilitating the adoption of preemptive measures to protect the health of construction workers.

Project managers should balance a variety of resource elements in building projects while taking into account many major concerns, including time, cost, quality, risk, and the environment. This study presents a framework for resource trade-offs in project scheduling based on the Building Information Modeling (BIM) methodology and metaheuristic algorithms. First, a new metaheuristic algorithm called Fire Hawk Optimizer (FHO) is used. Using project management software and the BIM process, a 3D model of the construction is created. In order to maximize quality while minimizing time, cost, risk, and CO2 in the project under consideration, an optimization problem is created, and the FHO's capability for solving it is assessed. A predefined stopping condition is taken into account while doing 30 independent optimization runs to obtain the statistical metrics, such as the mean, standard deviation, and the required number of objective function evaluations. The results show that the FHO algorithm is capable of producing competitive and exceptional outcomes when it comes to trade-off various resource options in projects.

The significance of virtual reality (AR/VR/MR) technology stands out because it can be used in various construction fields such as urban design, construction review, maintenance and education, etc. As to prove this, conglomerates such as Facebook, Google, Sony, Microsoft, and Samsung are increasing their investments to preoccupy the virtual reality market and are competing to dominate the contents and platform market. Virtual reality technology has a concept that collectively refers to VR (Virtual Reality), AR (Augmented Reality), and MR (Mixed Reality), but technically, the two technologies are strictly separated. While VR technology is an immersive virtual environment using computer graphic technology, AR technology is a more advanced technology that combines real data and VR data, and MR technology is a technology that combines both AR and VR. In Korea, Republic of, the use of BIM (Building Information Modeling), a 3D information model, becomes mandatory and based on this, the demand for a new market where VR/AR/MR technologies and advanced sensing equipment are combined increases. This study implemented a building maintenance platform using AR based on 5G, and developed matching technology between BIM of the building maintenance platform and AR equipment. Besides this study implemented the technology to enhance the matching rate of the matching technology and carried out the process to enhance the matching rate empirically through continuous tests. As a result, the initial target of 90% matching rate could be improved to 96%. Based on this, it is expected that effective EV (Optimum Life Cycle Cost) could be achieved at a lower cost compared to the previous one by using it for maintenance monitoring after construction and completion of the building, and can be used as an effective solution in the aspect of building maintenance as well.

The erosion of surface pipelines induced by proppant flowback during shale gas production is significant. The surface pipelines in a shale gas field in the Sichuan Basin experienced perforation failures after only five months of service. To investigate the erosion features of L360N, coatings, and ceramics and optimize the selection of two protective materials, a gas-solid two-phase flow jet erosion experimental device was used to explore the erosion resistance of L360N, coating, and ceramic under different impact velocities (15 m/s, 20 m/s, and 30 m/s). An energy dispersive spectroscope, a scanning electron microscope, and a laser confocal microscope were employed to analyze erosion morphologies. With the increase in flow velocity, erosion depth and erosion rate of L360N, coating, and ceramic increased and peaked under an impact velocity of 30 m/s. Maximum erosion rate and maximum erosion depth of L360N were respectively 0.0350 mg/g and 37.5365 µm. Its primary material removal mechanism was plowing of solid particles and microcracks were distributed on the material surface under high flow velocities. Maximum erosion rate and maximum erosion depth of coating were respectively 0.0217 mg/g and 18.9964 µm. Its primary material removal mechanism was the detachment of the binder phase Co caused by plowing. Maximum erosion rate and maximum erosion depth of ceramics were respectively 0.0108 mg/g and 12.4856 µm. The erosion mechanisms were micro-cutting and plowing. Under different particle impact velocity, different erosion morphologies were observed, but the primary erosion mechanism was the same. The erosion resistance of ceramics was higher than that of coating. Therefore, ceramic lining materials could be used to protect the easily eroded parts, such as pipeline bends and tees, and reduce the failure rate by more than 93%. The study provided the data and theoretical basis for the theoretical study on oil and gas pipeline erosion and pipeline material selection.

Open-plan office (OPO) layouts emerged to allow organizations to adapt to changing workplace demands. We explore the potential for OPOs to provide such adaptive capacity to respond to two contemporary issues for organizations: the chronic challenge of environmental sustainability, and the acute challenges emerging from the great COVID-19 homeworking experiment. We apply a socio-technical systems perspective and green ergonomics principles to investigate the relationship between an OPO environment and the occupants working within it. In doing so, we consider the relevant technical and human factors such as green technology and employee green behavior. We also consider how a green OPO might provide non-carbon benefits such as improving occupant wellbeing and supporting the emergence of a green organizational culture. Our investigation highlights several avenues through which an OPO designed with green ergonomic principles could benefit occupants, the organizations they work for, and the natural environment of which they are a part and on which they depend. We find reason to suspect that green OPOs could play an important role in sustainable development; and offer a research agenda to help determine whether in fact OPOs are another example of how going green is good business.

This study examined the economics of Philippine Lime or Calamansi production in selected Cities and Municipalities in Nueva Ecija, Philippines. The study was conducted within the rural farming households' framework, which constitutes the Philippine agricultural sector's backbone, producing about 5.8 percent of the total national agricultural output with the Central Luzon area, including the portion of the locale of the study. Using quota sampling, data collected from 50 selected calamansi grower- farmers from top 5 producing area in Nueva Ecija, the study measured the profitability of and the production efficiency of calamansi production in the area. Using a formal interview schedule, primary data was obtained from the sampled farming households. The study revealed that the typical calamansi farmer in the area as reflected in the instrument, thirty-two (32) or 64% which covers the majority of the respondents claimed that they fully owned the land they cultivated. Calamansi yield depends on its age as well. Fertilizer was found to harm output. Majority of them shared the same production and post–production practices, though a slight difference in terms of labor cost was observed. There were some who were already in the industry for quite a long time and learned other farming techniques and practices different from the conventional and were proven effective. For better efficiency, the land area cultivated, the farmers' educational status, accessibility to credit facility, and development of the rural areas and farmers' contact with the extension agents are some of the key issues to address. The local government in cities and municipalities may engage in an intensive campaign in encouraging capitalists to form cooperatives, processing and manufacturing houses to produce calamansi juice and other valuable products out of the calamansi fruit.

In Malaysia, as in many parts of the world, vocational education and training (VET) is frequently perceived as the solution to improving the opportunities of youths who lack the resources, skills or motivation to continue with higher education. The focus of the study falls on the effectiveness of the apprenticeship scheme during the 10^th Malaysia Plan. This study may provide an opportunity to find out how the related parties react towards the apprenticeship scheme. This is important, as feedbacks are central to the success or failure of any scheme. It is expected that the relevant government bodies, private sectors, trainers and trainees will have a valuable insight on the progress this far and what need to be done in the future based on the outcome of the research. This study follows snowballing sampling method and gathers the information from apprentices from variety of industrial sectors. The findings indicate effectiveness at some types of training but lacks comprehensiveness and efficient use of resources and future direction, especially during the 10^th Malaysia plan period from 2011 to 2016. This exploratory research is a first chapter of the deeper study in this niche.

This study aims to find a communication model of contingency plan for disaster risk management of Sinabung Volcano eruption, in North Sumatera. The object of the research is communication and coordination across the government, non-government organization, and community. This study used planning theory, the concept of communication planning, and types of disaster management plan as tools for analysing. Descriptive qualitative is used as the method. Data collection was obtained from the focus group discussion (FGD), in-depth interviews, observation, and study documentation. There are three stages in descriptive qualitative research that is data reduction, data presentation, and conclusion. An analysis was conducted qualitatively on the program and competence actors. The results found the communication model of disaster risk management through documents of contingency planning to overcome the threat of Mount Sinabung eruption. During the emergency response period a core model was used to reduce the impact of the Mount Sinabung eruption. The contingency plan becomes the Karo District Government’s document. This document were authorized by an authorized official and is ready to be applied to the Emergency Response Operation Plan. Plans for emergency response operations are carried out based on information regarding damage and the need to obtain results of a quick review. Contingency plans are submitted to the legislature for political commitment and support and budget allocation.

This paper presents the results of theoretical and applied research that employs methodological experimentation in a project for the protection and integrated transformation of the downtown area of the city of Sharjah in the United Arab Emirates. The particular nature of this case relates to two factors: a) strategies and policies to protect and enhance the cultural heritage as a driver for tourism and the cultural development of the entire Emirate, from archaeological goods to the urban fabrics in historical centres (Sharjah and Korfakkhan), in contrast to the surrounding emirates; and b) the client’s request to define guidelines to manage the urban cultural heritage during a time of transition while awaiting the results of UNESCO candidacy. This unique fact denotes a sensitivity and long-term policies regarding the cultural heritage which view the recovery of the urban historical heritage, assuming the cultural component as the fourth dimension of sustainability. The methodological approach, the results of the research, and design are organized on the dual urban and building scale to understand the structure and elements of the historical centre. The actions and interventions are differentiated with respect to urban fabric, building, archaeological good, and landscape and translate the strategies of the guidelines into short-/mid-/long-term design actions.

In the recent decade, Building Information Modelling (BIM) has widely been adopted in the Architecture, Engineering and Construction (AEC) industry and completely upended the way we build. While BIM continues gain momentum in the industry, it has also attracted increasing attentions from researchers. However, most of the current study focuses on reviewing BIM for management, BIM for green building, BIM for infrastructure and BIM for Facilities Management (FM). There are few studies about Global BIM review and to discuss their complex inter-connections. In this study, we adopted a scientometric analysis method to review global BIM research from 2004-2019. A total of 1455 scholarly bibliographic records obtained from Web of Science Core Collection databased were established for the analysis. This study has identified the top productive and influential researchers, research institutes, regions/countries, subject categories and journals in the BIM field. In addition, 11 clusters of Global BIM research were also identified including construction project, green BIM, construction safety planning, automated IFC-based workflow and so on. Authors distinguished 11 clusters of global BIM research into 3 stages, namely formulating stage, accelerating stage and transforming stage. Furthermore, authors reviewed the BIM policy of Singapore and observed there is a co-production relationship between evolution of BIM policy and global BIM research. These findings provide valuable information for researchers, practitioners and policy makers by visualizing the current progress in the research field of BIM and highlighting future research needs.

Background There is increasing awareness of problems associated with global warming but a lack of a systematic approach on how to deliver more environmentally sustainable dental care. A sustainable world aims to ensure that basic needs and quality of life of everyone are met, now and for future generations. The carbon footprint is an indicator of environmental sustainability. Aim The aim is to suggest an environmental management change for the dental practice focusing on the objective of carbon footprint reduction. Environmental management change design The management change is based on the concept of “Plan-Do-Check-Act”, as recommended by the International Organisation for Standardisation (ISO) and described through the environmental aspects of the dental practice. The approach focuses on establishing and implementing environmental objectives, followed by monitoring results and taking actions to improve continually. The environmental aspects considered for the dental practice are activities causing an impact on the carbon footprint: energy use, travel, product purchasing, waste production, emission to air, water use, and contamination of land. Conclusions The “Plan-Do-Check-Act” ISO 14100-2015 model can be effectively integrated into the dental practice setting for its environmental management. A reduction of the carbon footprint of the dental practice is achieved by applying the environmental management change described for each activity.

This paper aims to present the method of producing visual media for communicating the Asinara Island National Park plan. These products are landscape visualizations able to foster landscape preservation both from the point of view of the management of the landscape and of the citizen's involvement in the communication of the historical and environmental values of the landscape. Starting from landscape information gathering, the research has experimented with an operative method for processing different graphic representations from the same geographic database, calibrating the outputs to different audiences, their needs, objectives, and literacy skills. Three different types of products are presented: the first is a digital, dynamic and multisectoral decision-making GIS tool for park management. The second is a 3D model, aimed to the virtual fruition. The third is a map of the zoning park plan drawn to be easily readable to the non-expert public. This case study emerges as a replicable method to process the landscape information to make different visualization tools from a single geographic model, to meet the different requirements that arise from a complex landscape planning process.

High-rise buildings represent technological, urban and life-style trends of the modern urban landscape, yet there are limited data regarding their embodied carbon and environmental impacts, particularly when compared to low- or mid-rise buildings. Given that the projected growth of the global urban population by 2050 requires cities with higher density and potentially greater number of high-rise buildings, it is crucial to develop a clear understanding of the embodied carbon and environmental impacts of high-rise buildings. This article utilizes the building in-formation modelling (BIM) based life cycle assessment (LCA) in Revit and Tally to examine the embodied carbon and environmental impacts of an actual high-rise building structure case-study in Chicago that uses hybrid concrete steel structure. The results show that the embodied carbon and environmental impacts of the high-rise building structure are dominated by the impacts of the product stage in the building life cycle, and concrete as the main structural material. Specifically, this study reveals that concrete constitutes a substantial 91% share of the total mass of the building structure, with 74% contribution to life cycle global warming potential, 53% to acidification po-tential, 74% to eutrophication potential, 74% to smog formation potential, and 68% to non-renewable energy. On the other hand, steel accounts for 9% of the building structure mass, estimated to constitute 26% of the global warming potential, 47% to acidification potential, 26% to eutrophication potential, 26% to smog formation potential, and 32% to non-renewable energy.

Advancements in Parametric Design, Generative Design, and automation in Building Information Modelling (BIM) have opened new opportunities for architects and engineers working on complex buildings, such as offices. These developments allow designers to enhance their designs, increase project efficiency, improve performance, and reduce project time and costs. To address conflicting objectives that arise during the design process, genetic algorithms with multi-objective optimization (MOO) have been employed in architectural design. The GENIUS project aims to optimize building shape, apertures, and shading systems in the concept and design stages, with a focus on energy and daylight performance. The project integrates BIM and visual programming tools with Artificial Intelligence techniques like Genetic Algorithms and RBFOpt model-based optimization. Optimization algorithms are used to identify the best solutions that meet all design objectives, helping architects optimize their designs and achieve desired outcomes. The workflow was tested on a case study of a large office building, with MOO focused on maximizing daylight performance using Spatial Daylight Autonomy metric and minimizing energy consumption using Energy Use Intensity metric. The project provides architects with a method to improve their designs using Algorithm Aided Design tools, which help identify the best solutions for complex design problems.

Patients with chronic obstructive pulmonary disease (COPD) often require frequent hospitalization due to worsening symptoms. Preventing prolonged hospital stay and readmission becomes a challenge for healthcare professionals treating patients with COPD. Although the integration of health and social care supports greater collaboration and enhanced patient care, organizational structure and poor leadership may hinder the implementation of patient-oriented goals. This paper presents a case of a 64-year-old chronic smoker with severe COPD who was to be discharged on long-term oxygen therapy (LTOT). It further highlights the healthcare decisions made to ensure the patient’s safety at home and further provides a long-lasting solution to the existing medical and social needs. The goal was accomplished through a discharge plan that reflects multidisciplinary working, efficient leadership, and change management using Havelock’s theory. While COPD is characterized by frequent exacerbation and hospital readmission, it was emphasized that most failed discharges could be attributed to bureaucratic organizational workflow which might not be in the patient’s best interest. It was further demonstrated that healthcare professionals are likely to miss the window of opportunity to apply innovative and long-lasting solutions to the patient’s health condition in an attempt to remedy the immediate symptoms of COPD

Background: Ongoing Primary and Secondary Education Development Program (PEDP & SEDP) has led to increase in enrollment of children in schools. This created a high demand for facilities such as classroom, chairs, laboratories, latrines and water supply. Water and latrines did not receive equal attention like others. National strategic plan for School Water Sanitation and Hygiene (SWASH) 2012-2017 was to address such challenges with objectives to improve SWASH by 2017. Hence this study aimed to evaluate the implementation of SWASH program in Ukerewe. Methodology: A cross sectional survey was done among 42 schools in the district with 40 schools being government owned. Systematic random sampling was used and data were collected using a structured interview which was pre-tested and amended prior to conducting fieldwork. UNICEF, WASH in Schools Monitoring Package observational check-list was used to assess sanitation facilities. Results: Findings from this study showed the latrine-hole to student ratio was 1:71 with only 31.3% of the latrines being in good clean condition and about half (59.5%) of the schools have no facilities for washing hands. For the schools with hand washing facilities only 21.4% have an effective hand washing practice (presence of soap and water). The most common source of water used was lake water (35.7%) with (42.9%) having water storage facilities. Conclusion: The study shows that most of the objectives of national strategic plan are yet to be implemented at Ukerewe. There is a need for minor repairs to complete new construction of SWASH facilities in Ukerewe.

A drone performs comparable function to a laser scanner in the construction quality monitoring, following Scan-to-BIM process. Both technologies digitally capture the as-is environment into the computer and the data captured is transferred to a BIM world to create accurate as-built models. Although the laser scanner is the dominant method of the Scan-to-BIM process, a number of digital professionals point drawbacks of the method and present the drone is an alternative that can improve the drawbacks thereby leading to UAV-to-BIM process in parallel with the Scan-to-BIM. Korean construction industry plans to utilize the two technologies for monitoring construction operation quality in major public projects by 2025. While contractors need competent engineers to be competitive in the projects, the two technology applications are not so popular to the construction projects in Korea and very few experts skillful and knowledgeable of the technologies are available. Korean universities are requested to develop the curriculum of the technologies for the contractors. To be successful in progressing the curriculum, it is very essential to implement a preliminary study with the technologies minimizing the potential failure in operating the curriculum later on. This study performs empirical research on the technologies and identify valuable lessons beneficial to develop the UAV-to-BIM curriculum for the construction engineers.