Several articles have reported that the low number of COVID-19 cases in Japan is attributed to the small number of diagnostic RT-PCR tests performed. The criticism is based on the low number of the tests performed, and they suspected there would be more potential cases in Japan. The use of pre-test probability among tested subjects is proposed in order to evaluate of the sufficiency of test availability instead of the number of the tests. The pre-test probability means the average probability, i.e., ‘suspicion level’, of having coronavirus among the tested subject in a country. The higher pre-test probability is regarded as less sufficient opportunity of the tests, and the test availability could be evaluated by the pre-test probability. Thus, potential problems of underestimation of COVID-19 cases by insufficient amount of the test would be clear by using pre-test probability. The comparison of the pre-test probability could be replaced with that of the positive rate of the test because of the linear relationship between them under the assumption of common sensitivity and specificity. Japan shows the third lowest rate (8.6%), and is considered that the considerably sufficient number of the tests have been performed. In conclusion, the positive rate of the test as a surrogate index of the pre-test probability is useful to evaluate the sufficiency of test amount instead of the number of the tests performed. In present, the potential problem of underestimation by insufficient test availability would be less serious in Japan.

Many people in the USA have lost their lives or become addicted to opioids via prescription opioids given for chronic pain. The chronic pain epidemic has emerged due to a convergence of factors, including the medicalization of pain as well as injuries happening in the workplace, in the home, or during recreation. Opioid prescriptions rose precipitously from the late 1990’s through to approximately 2020, and despite public awareness, still are increasing. This review examines literature on integrative approaches to chronic pain as delineated by pain type. The review is organized by the most common causes of chronic pain, and randomized controlled trials, meta-analyses and systematic reviews are extracted for each cause of chronic pain. Several promising interventions may alleviate chronic pain of some causes, and some interventions may work across pain causes. Lowering inflammation through dietary or lifestyle regimens may be a general way of reducing pain. Pain can be alleviated through several adjunctive and integrative treatment approaches, which may serve to lower the need for opioid medication.

Hypertension is a global public health challenge, with a high prevalence across various regions and significant implications for cardiovascular risk. This article reviews the effectiveness of herbal medicine as a potential therapeutic approach for hypertension, offering an alternative or complementary solution to conventional pharmacological treatments. It highlights several natural agents that have demonstrated efficacy in lowering systolic blood pressure (SBP) in clinical and meta-analytical studies. The methodology involved a systematic review of articles that discuss herbal therapeutics for hypertension, focusing on their efficacy compared to placebo and standard treatments. The findings suggest that certain nutraceuticals, such as garlic, hawthorn, and CoQ10, can significantly reduce SBP, presenting a viable option for managing hypertension. This review underscores the need for further research to validate these findings and optimize herbal treatment strategies, potentially expanding the use of these natural products in clinical practice. The article aims to increase awareness among medical professionals and patients about the benefits and applications of herbal medicines in treating hypertension.

The aging populations observed across numerous countries worldwide necessitate a thorough exploration of interventions aimed at promoting healthy aging. As individuals age, they undergo significant physiological changes that impact their functional capacity and often necessitate increased reliance on external support systems. Enhancing the autonomy and well-being of elderly individuals emerges as a critical imperative, serving not only individual interests but also broader societal goals. This review investigates various interventions designed to optimize the health and independence of aging populations, offering insights into effective strategies for promoting healthy aging and mitigating the societal burdens associated with an aging demographic.

Weak signal spectral detection is a serious problem in many applications, especially the target possesses certain frequency band and under low signal-to-noise ratio (SNR). A kind of novel technique based on pre-whitening scale-transformation symmetric bistable parallel stochastic resonance (SR) is proposed to solve the problem. Firstly, the pre-whitening can ensure the even distribution of the receiving signal to fit the requirement of SR processing. Secondly, the scale- transformation can help to utilize the weak signal improvement property especially under low frequency band more effectively. Thirdly, the symmetric bistable parallel SR can try to reduce the variance of the clutter and additive noise fluently. Fourthly, by subtracting the steady state re-sponse of the selected symmetric bistable SR system from the parallel SR output, the weak signal spectral detection objective can be realized successfully. Simulation results based on the real sea clutter radar data guarantee the effectiveness and applicability of the proposed symmetric bistable PSR processing approach.

Antidepressants are among the most used medications in the US, with significant deleterious effects on people’s well-being. At any given time, depression impacts approximately 1 in 10 Americans, causing wide and broad societal costs. Interest is developing for non-pharmacological treatments and preventative measures. We summarize the literature on non-invasive dietary and lifestyle approaches for treating depression, including recent work with the psychedelic treatment of depression. This review aims to inform future research and treatment programs for depression. This review provides an evidentiary summary of integrative therapeutic approaches for depression.

On the 9th March 2020, the first patient with COVID-19 was admitted to ICU in the Royal Gwent Hospital, Newport, Wales. We prospectively recorded the rate of ICU admissions of 52 patients with COVID-19 over 60 days, focusing on the epidemiology of ethnicity and deprivation. Patients were 65% (34 of 52) male and had a median (IQR) age of 55 (48-62) years. Prevalent comorbidities included obesity (52%); diabetes (33%), and asthma (23%). COVID-19 hospital and ICU inpatient numbers peaked on days 23 and 39, respectively – a lag of 16 days. The ICU mortality rate was 33% (17 of 52). Black, Asian and Minority Ethnics (BAME) population represented 35% of ICU COVID-19 admissions (18 of 52) and 35% of deaths (6 of 17). Within the BAME group, 72% (13 of 18) were found to reside in geographical areas representing the 20% most deprived in Wales, versus 27% of Caucasians (9 of 33). Less than 5% of the population within the hospital catchment area are of BAME descent, yet they represent a disproportionately high proportion of patients with ICU admission and mortality suffering from COVID-19. The interplay between ethnicity and deprivation, which is complex, may be a factor in our findings. This in turn could be related to an increased prevalence of co-morbidities; higher community exposure; or genetic polymorphisms.

This study examined the efficiency of a combined diagnostic approach in which bioamplification of Arizona 861 S1 citron was integrated with RT‒PCR to detect Citrus tristeza virus (CTV) and Hop Stunt Viroid (HSVd) in Citrus plants. The capacity of the combined method to diagnose mixed infections of CTV and HSVd, along with early single infections of both pathogens, was assessed by evaluating the incubation periods and differential detection capabilities between the combined and direct methods. The bioamplification method exhibited high sensitivity (100%) and specificity (100%) for CTV, enabling early detection even in patients with low-titer infections compared to direct RT‒PCR. However, for HSVd, the combined method achieved 50% sensitivity in early infections, highlighting the need for additional replicates to enhance diagnostic reliability. The relative concentrations of pathogens in mixed and simple infections were evaluated; the analysis revealed no significant differences, suggesting minimal interference between CTV and HSVd. This approach allows early detection of CTV but requires further refinement for HSVd diagnosis. These findings underscore the complementary roles of the cost-effectiveness of direct RT‒PCR and the sensitivity of the combined method in implementing effective disease control strategies in citrus crops.

Coronavirus is a disease caused by a severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) which emerged as a global pandemic in 2019 from Wuhan, China. Since its emergence, it has caused immense suffering to human life, 6.27 million lives have been lost, movement curtailed and social dynamics disrupted. The golden standard for getting samples for SARS-CoV-2 detection is through oral- nasopharyngeal swab, this method of sample collection is invasive and uncomfortable, thus stigmatized the general population, and thereby impeded the progress of controlling the spread through mass testing. Being a contact disease, mechanisms to encourage mass testing is key to reduce the spread. This study thus developed a complimentary sample type to test for SARS-CoV-2, the use of human feces. Fecal samples were collected from 100 asym-symptomatic individuals suspected to be infected with COVID-19, virus RNA was then extracted and profiled through Real Time Polymerase Chain Reaction (RT-qPCR). The antigen rapid diagnostic test revealed high positivity rate of 44%, but the real time polymerase chain reaction results on nasopharyngeal and fecal samples revealed a significant variation, high number of the patients tested positive with stool samples compared to the nasopharyngeal swabs, with 43 and 37%, respectively. SARS-CoV-2 virus was detected in both symptomatic and asymptomatic individuals; however, the symptomatic registered a higher positivity of 25% compared to 20% among the asymptomatic patients. Vaccination only lowered the risk of infection, fully and partially vaccinated lowered the infection level to 10% compared to 20% among the unvaccinated. Finally, gender parity in relation to COVID19 was evaluated, more females (56%) compared to males were recruited in this study, out of which (20; 43.4%) were positive, and 26 (56.6%) were negative based on fecal RT-qPCR outcomes. Based on the outcome of this study, rapid diagnostic test (Ag-RDT) however cheap and or fast does not provide accurate information, moreover, the virus does not stay longer within the Oro-nasopharyngeal region, thus the invalid or negative results, thus use of feces should be adopted as a confirmatory test to ascertain the COVID19 status of an individual.

With the development of organizational biology and forced from the EU Cosmetic Regulation (EU/1223/2009) with the complete ban of animal testing for cosmetic purposes, 3D skin models have been widely developed due to their similar physiological structure and metabolic function to native human tissue. 3D skin models for in vitro cosmetic evaluation are still promising alternative methods for evaluating phototoxicity, corrosivity and irritation. These models have been used for early screening and later validation of toxicity and efficacy evaluation by many well-known cosmetic companies. 3D skin models have become an important tool in cosmetic evaluation research. This article reviews the development of 3D skin models and their application in cosmetic evaluation. An outlook on the current application and future technological development directions in the cosmetic field is also presented.

Outbreaks of coronavirus disease 2019 (COVID-19) have been recorded in different countries across the globe. The virus is highly contagious, hence early detection, isolation, and quarantine of infected patients will play an important role in containing the viral spread. Diagnosis in a mobile lab can aid to find infected patients in time. Here, we develop a field-deployable diagnostic workflow that can reliably detect COVID-19. Instruments used in this workflow could easily fit in a mobile cabin hospital and also be installed in the community. Different steps from sample inactivation to detection were optimized to find the fastest steps and portable instruments in detection of COVID-19. Each step was compared to that of the normal laboratory diagnosis set-up. From the results, our proposed workflow (80 min) was two times faster compared to that of the normal laboratory workflow (183 min) and a maximum of 32 samples could be detected at each run. Additionally, we showed that using 1% Rewocid WK-30 could inactivate the novel coronavirus directly without affecting the overall detection results. Comparison of our workflow using an in-house assay to that of a commercially acquired assay produced highly reliable results. From the 250 hospital samples tested, there was a high concordance 247/250 (98.8%) between the two assays. The in-house assay sensitivity and specificity were 116/116 (100%) and 131/134 (97.8%) compared to that of the commercial assay. Based on these results, we believe that our workflow is fast, reliable, adaptable and most importantly, field deployable.

It is important to be able to detect and differentiate between distinct porcine enteric coronaviruses that can cause similar diseases. However, the existence of naturally occurring recombinant coronaviruses such as swine enteric coronavirus (SeCoV) can give misleading results with currently used diagnostic methods. Therefore, we have developed and validated three duplex real-time quantitative RT-PCR assays for the simultaneous detection of, and differentiation between, porcine epidemic diarrhea virus (PEDV) and SeCoV. Transmissible gastroenteritis virus (TGEV) is also detected by two out of these three assays. In addition, a novel triplex assay was set up that was able to detect and differentiate between these alphacoronaviruses and the porcine deltacoronavirus (PDCoV). The validated assays have low limits of detection, close to 100% efficiency and were able to correctly identify the presence of PEDV and SeCoV in 55 field samples, while 20 samples of other pathogens did not give a positive result. Implementing one or more of these multiplex assays into the routine diagnostic surveillance for PEDV will ensure that the presence of SeCoV, TGEV and PDCoV will not go unnoticed.

Background and Objectives: Most individuals infected by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) are asymptomatic or have mild symptoms of COVID-19, which usually resolve after few days. Regardless of symptoms, infected people can transmit the virus to others especially on the first days of infection. Quantitative reverse transcription-polymerase chain reaction (RT-qPCR) is used to confirm SARS-CoV-2 infection; some individuals show persistent PCR-positivity after recovering from COVID-19. In this study, 12 individuals who showed persistence of COVID-19 symptoms and of SARS-CoV-2 PCR-positivity were followed-up. Methods: nasopharyngeal samples were collected for SARS-CoV-2 detection by RT-qPCR; clinical and epidemiological data were analyzed. Results: that persistence of SARS-CoV-2 PCR positivity was associated with duration of symptoms (r_s 0.81338), which varied between one and 49 days, with 75% of the individuals reporting symptoms for more than two weeks; 83.33% of cases remained positive after two weeks of onset of symptoms, despite decreases in viral load. Conclusion: neither RT-qPCR test nor a symptom-based approach alone are sufficient to evaluate discontinuation of patient isolation; other factors such as viral loads and symptom severity should also be considered. Additional studies are needed to understand how RT-PCR-positivity is related to symptoms and the risk of viral transmission, and to better support isolation guidelines.

Reliable methods to confirm the diagnosis of COVID-19 are essential to the successful management and containment of the virus. Current diagnostic options are limited in type, supply, and reliability. This article explores the controversial unreliability of existing diagnostic methods and maintains that more reliable diagnostic methods, combinations, and sequencing are necessary to effectively assist in reducing the occurrence of discharge of the patient on false negative test results. This reduction would in effect reduce transmission of the disease.

Based on the need for real-time sag monitoring of Overhead Power Lines (OPL) for electricity transmission, this article presents the implementation of a hardware and software system for online monitoring of OPL cables and cable sag determination. The mathematical model based on differential equations and the methods of algorithmic calculation of OPL cable sag are presented. Considering that, based on the mathematical model presented, the calculation of OPL cable sag can be done in different ways depending on the sensors used, and the presented application uses a variety of sensors. Therefore, a direct calculation is made using one of the different methods. Subsequently, the verification relations are highlighted directly and, respectively, the calculation by the alternative method, which uses another group of sensors, to generate both a verification of the calculation and the functionality of the sensors, thus obtaining a defect observer of the sensors. The hardware architecture of the OPL cable online monitoring application is presented, together with the main characteristics of the sensors and communication equipment used. The configurations required to transmit data using the ModBUS and ZigBee protocols are also presented. The main software modules of the OPL cable condition monitoring application are described, which ensure the monitoring of the main parameters of the power line and the visualisation of the results both on the electricity provider's intranet using a web server and MySQL database, and on the Internet using an Internet of Things (IoT) server. This categorisation of the data visualisation mode is done in such a way as to ensure a high level of cyber security. Starting from the mathematical model of the OPL cable sag calculation, it goes through the stages of creating such a monitoring system, from the numerical simulations carried out using Matlab to the real-time implementation of this monitoring application. The main modules of the application software are: the software module for reading quantities from the sensor network through a ModBUS Input/Output (I/O) server, the software module for real-time calculation of the OPL cable sag, the software module for read/write operations based on MySQL type data, the software module for transferring data to the user's intranet through a web server, and the software module for viewing data by authorised users based on user and password through an IoT server. The development software environments used are Matlab and Laboratory Virtual Instrument Engineering Workbench (LabVIEW).

Mosquitoes genus Aedes are the most important arthropod disease vector. Dengue Virus (DENV) and Chikungunya Virus (CHIKV) are the main arboviruses distributed in the world. Based on entomo-virological surveillance, appropriating public health strategies can be addressed to contain cases and control outbreaks. This study aims to show the potential performance of two new molecular methods for detecting DENV serotypes and CHIKV in mosquitoes. Mosquitoes were collected in urban areas and sylvatic areas between July to August 2023, DENV and CHIKV were screened using new multiplex RT-PCR and RT-q PCR. A total of 2150 mosquitoes were trapped including 976 Aedes (959 Ae. egypti, 6 Ae. furcifer and 11 Ae. Vittatus) and 1174 Culex from 39 pools of a maximum of 30 mosquitoes each, tested by molecular screening, 7.7% (3/39) were positive for DENV, DENV-1 was detected in one pool (1/3), and DENV-3 in two pools (2/3). All the pools were negative for CHIKV. The overall minimum infection rate (MIR) of DENV in this study was 3.07 (95% CI: 2.24 —19.86). This study shows the usefulness of our new molecular tools in DENV serotypes and CHIKV surveillance.

The affinity constant, also known as the equilibrium constant, binding constant, equilibrium association constant, or the reciprocal value, the equilibrium dissociation constant (K_d), can be considered as one of the most important characteristics for any antibody-antigen pair. Many methods based on different technologies have been proposed and used to determine this value. However, since a very large number of publications and commercial datasheets do not include this information, significant obstacles in performing such measurements seem to exist. In other cases where such data are reported, the results have often proved to be unreliable. This situation may indicate that most of the technologies available today require a high level of expertise that does not seem to be available in many laboratories. In this paper, we present a simple approach based on standard immunoassay technology that is easy and quick to perform. It relies on the effect that the molar IC₅₀ approaches the K_d value in the case of infinitely small concentrations of the reagent concentrations. A two-dimensional dilution of the reagents leads to an asymptotic convergence to K_d. The approach has some similarity to the well-known checkerboard titration used for the optimization of immunoassays. A well-known antibody against the FLAG peptide, clone M2, was used as a model system and the results were compared with other methods. This approach could be used in any case where a competitive assay is available or can be developed. The determination of an affinity constant should belong to the crucial parameters in any quality control of antibody-related products and assays and should be mandatory in papers using immunochemical protocols.

Wastewater surveillance for pathogens using the reverse transcription-polymerase chain reaction (RT-PCR) is an effective, resource-efficient tool for gathering additional community-level public health information, including the incidence and/or prevalence and trends of coronavirus disease-19 (COVID-19). Surveillance of SARS-CoV-2 in wastewater may provide an early-warning signal of COVID-19 infections in a community. The capacity of the world’s environmental microbiology and virology laboratories for SARS-CoV-2 RNA characterization in wastewater is rapidly increasing. However, there are no standardized protocols nor harmonized quality assurance and quality control (QA/QC) procedures for SARS-CoV-2 wastewater surveillance. This paper is a technical review of factors that can lead to false-positive and -negative errors in the surveillance of SARS-CoV-2, culminating in recommendations and strategies that can be implemented to identify and mitigate these errors. Recommendations include, stringent QA/QC measures, representative sampling approaches, effective virus concentration and efficient RNA extraction, amplification inhibition assessment, inclusion of sample processing controls, and considerations for RT-PCR assay selection and data interpretation. Clear data interpretation guidelines (e.g., determination of positive and negative samples) are critical, particularly during a low incidence of SARS-CoV-2 in wastewater. Corrective and confirmatory actions must be in place for inconclusive and/or potentially significant results (e.g., initial onset or reemergence of COVID-19 in a community). It will also be prudent to perform inter-laboratory comparisons to ensure results are reliable and interpretable for ongoing and retrospective analyses. The strategies that are recommended in this review aim to improve SARS-CoV-2 characterization for wastewater surveillance applications. A silver lining of the COVID-19 pandemic is that the efficacy of wastewater surveillance was demonstrated during this global crisis. In the future, wastewater will play an important role in the surveillance of a range of other communicable diseases.

Purpose: To explore how race and residential zip codes' socioeconomic index (SES) influenced COVID-19 testing rates in St. Louis during the early and peak phases of the pandemic. Method: An ecological study was conducted using COVID-19 testing data from March to November 2020 in St. Louis City. The study included 16,915 individual tests from 30 residential zip codes. Results: The overall testing rate in St. Louis was 303.97 per 10,000 population. Testing rates among Blacks, Whites, American Indian/Alaskan Natives, and Asians were 374.26, 247.77, 360.63, and 242.41 per 10,000, respectively. Higher testing rates were observed in low and middle SES zip codes compared to high SES zip codes. Adjusted for SES, testing rates were 1.68% higher among Blacks and 0.43% higher among American Indian/Alaskan Natives compared to Whites, and 0.033% lower among Asians. Geographical mapping showed higher testing rates in the inner core and lower rates in the periphery of St. Louis. Conclusion: Race and SES influence testing rates. Areas with low testing rates should be targeted for intervention in St. Louis.

The co-circulation of duck hepatitis A virus subtypes 1 (DHAV-1) and 3 (DHAV-3) in ducklings has resulted in significant economic losses. Because ducklings infected with DHAV-1 or DHAV-3 show similar clinical signs and gross lesions, it is important to discriminate these subtypes as early as possible for better clinical management. On the basis of multiple alignments of the 5′-noncoding region sequences of strains DHAV-1 and DHAV-3, universal and type-specific primers were designed and synthesized. Using the primers in a one-tube reverse transcription-PCR (RT-PCR) assay, reference strains of DHAV-1 and DHAV-3 (isolated over a span of 60 years and covering many different countries) were successfully amplified, indicating that the primer sequences were completely conserved. The amplicon sequences results and the sizes of amplicons from reference DHAV-1 and DHAV-3 isolates correlated completely with their genotypes. Moreover, with this one-tube RT-PCR system, the amplicon sizes of liver samples of reference DHAV-1- or DHAV-3-infected birds matched perfectly with their respective genotypes, as determined by virus isolation and neutralization tests. No other RNA viruses of duck origin were detected with the synthesized primers. The sensitivity of viral RNA detection was 10 pg. With this system, 20% genotype 1, 45% genotype 3, and 9% co-infection of the two genotypes were detected in 55 clinical samples. This novel approach could be used for the rapid genotyping DHAV-1 and/or DHAV-3 infection in routine clinical surveillance or epidemiologic screening.

Accurate and timely testing has become an essential measure in combatting the COVID-19 global pandemic. Currently, polymerase chain reaction (PCR) based assays are the most relied on methods for SARS-CoV-2 detection. This traditional workflow involves a viral RNA extraction from the viral transport media storing nasopharyngeal swabs collected from patients, followed by PCR based detection. While accurate, this methodology is time consuming and resource heavy, causing for delays in receiving results or limited access to testing. Herein, we demonstrate a validated method for SARS-CoV-2 detection from viral transport media using a two-step, direct-to-PCR workflow revolving around shaker-mill homogenization. This method completely bypasses the extraction steps of the traditional workflow, replacing it with 30 seconds of mechanical disruption sufficient to allow for COVID-19 detection with a 96.43% sensitivity and 100% specificity when compared to traditional extraction to PCR based methods.

In Los Angeles, at one point, the Covid-19 testing positivity rate was 6.25%, or one in sixteen. This translates to, on average, one in sixteen specimens testing positive and the vast majority testing negative. Usually, we run sixteen tests on sixteen specimens to identify the positive one(s). This process can be time consuming and expensive. Since a group of negative specimens pooled together for testing will produce a negative result, one single test could potentially eliminate many specimens. Only when the pooled specimen tests positive do we need further testing to identify the positive one(s). Based on this concept, we designed a strategy that will identify the positive specimen(s) efficiently. Assuming one in sixteen specimens is positive, we find that only four tests are needed. Furthermore, we can run them simultaneously, saving both resources and time. Although, in the real world, we cannot make the assumption of only one positive specimen, the same strategy works with slight modification and proves to be much more efficient than the conventional testing. Our strategy returns an answer 48% of the time in four tests and one time cycle. Overall, the average number of tests is seven or eight depending on the follow-up testing, and the average time cycle is about one and a half.

Utilization of wasted heat instead of fuel combustion is effective to reduce primary energy consumption for mitigating global warming problem. Because wasted heat sources are not necessarily located close to areas of heat demand, one of the difficulties is that wasted heat has to be transferred from heat source side to heat demand side, which may require heat transportation over long distance. From this point we proposed and have examined new idea of heat transportation using ammonia-water as the working fluid which system is named Solution Transportation Absorption chiller, in short STA. Our previous studies of STA were mainly the experimental investigation with STA facility which cooling power was 25RT (90kW). As a result, the COP of STA was found almost same value 0.65 with the conventional absorption chiller without depending on the transportation distances. The simulation using AspenHYSYS also examined with same experimental condition. The experimental data showed good agreement with the simulation calculation. In this study, we examined the large-scale cooling power STA on simulation. The examination cooling powers were from 90 kW(25RT) to 3517 kW(1000RT). All cooling power achieved around COP 0.64 including pump power consumptions. In addition, we performed the dynamic simulation. As the results, there was no effect of pipeline size on the cooling capacities and mass flow rates. Furthermore, the stability time of the cooling capacities and mass flow rates were almost same regardless of the pipeline size and cooling capacity. In other words, STA may be achieved the same COP even though having various complex conditions compared with the conventional absorption chiller.

The emergence of SARS-CoV-2 mutations pose significant challenges to diagnostic tests as these mutations can reduce the sensitivity of commonly used RT-PCR assays. Therefore, there is a need to design diagnostic assays with multiple targets to enhance sensitivity. In this study, we identified a novel diagnostic target, nsp10 gene, using nanopore sequencing. Firstly, we determined the analytical sensitivity and specificity of our COVID-19-nsp10 assay. The COVID-19-nsp10 assay had the limit of detection of 74 copies/mL (95% confidence interval: 48-299 copies/mL) and did not show cross-reactivity with other respiratory viruses. Next, we determined the diagnostic performance of the COVID-19-nsp10 assay using 261 respiratory specimens, including 147 SARS-CoV-2-positive specimens belonging to ancestral strain and Alpha, Beta, Gamma, Delta, Mu, Eta, Kappa, Theta and Omicron lineages. Using the LightMix E-gene RT-PCR assay as the reference method, the diagnostic sensitivity and specificity of the COVID-19-nsp10 assay were 100%. The median Cp values for the LightMix E-gene RT-PCR and our COVID-19-nsp10 RT-PCR were 22.48 (range: 12.95-36.60) and 25.94 (range 16.37-36.87), respectively. The Cp values of the COVID-19-nsp10 RT-PCR assay correlated well with those of the LightMix E-gene RT-PCR assay (Spearman’s ρ = 0.968; P<0.0001). In conclusion, nsp10 is a suitable target for SARS-CoV-2 RT-PCR assay.

The novel COVID-19 pandemic prompted an unprecedented Institutional reaction to aggregate existing capacity from silos of research laboratories to establish a multidisciplinary research laboratory for COVID19 testing. In less than two weeks, resources were mobilized from the community to strengthen public health response and epidemic control. Such strengthening of institutional research capacity to support public health response contributes to a natural knowledge transfer, facilitates collaboration, and generates new frontiers for knowledge production that should ultimately lead to professional development and retention of skilled human resources. This report describes the pre-established mechanisms and involvement of the authors that made it possible to set-up a multidisciplinary laboratory in a remarkably short period of time. We also discuss the opportunities and sustainability of multidisciplinary laboratory research post-COVID19. Existing institutional capacity can be repurposed to establish multidisciplinary research laboratories to support the strengthening of basic and clinical translational research capacity in resource limited settings and impact on public health and scientific knowledge for socioeconomic development.

Abstract: Peptide pools composed of short amino acid sequences have proven to be versatile tools in various research areas and clinical applications. They are powerful tools for epitope mapping, immunotherapy, and vaccine development. Their importance lies in their ability to map complex protein structures, enabling a comprehensive understanding of immune responses and facilitating the identification of potential therapeutic agents. The application of peptide pools also extends to the field of personalized medicine, offering tailored solutions for diseases such as cancer and infectious diseases. Peptide pools are complex mixtures of immunostimulatory antigens primarily intended for T-cell stimulation. They are commercially available in many different compositions and variants. However, unlike other reagents that consist of only one or a few compounds, peptide pools are highly complex products with limited stability. This makes their quality control a major challenge. Quantitative peptide analysis usually requires sophisticated methods, in most cases isotope-labeled standards and reference materials. None of these are routinely available for these products. Synthesis and purification of all labeled peptides might be required. Usually, this approach would be prohibitively laborious and expensive. Therefore, an approach is needed to provide a practical and feasible method for quality control of peptide pools. With insufficient quality control, the use of such products could lead to incorrect experimental results, which would worsen the well-known reproducibility crisis in the biomedical sciences. Here we propose the use of ultra-high performance liquid chromatography (UHPLC) with two detectors, a standard UV detector (at 214 nm) for quantitative analysis and a high-resolution mass spectrometer (HRMS) for identity confirmation. To be cost-efficient and fast, quantification and identification are performed in one chromatographic run. An optimized protocol is shown, and different peak integration methods are compared and discussed. This work was performed using a peptide pool known as CEF, which consists of 32 peptides derived from cytomegalovirus (CMV), Epstein-Barr virus (EBV) and influenza virus, ranging from 8 to 12 amino acids in length.

Since the beginning of the year 2020, the global healthcare system has been challenged by the threat of the SARS-COV 2 virus. Molecular, antigen, and antibody testing are the mainstay to identify infected patients and fight the virus. Molecular and antigen tests that detect the presence of the virus are relevant in the acute phase only. Serological assays detect antibodies to the Sars-CoV-2 virus in the recovering and recovered phase. Each testing methodology has its advantages and disadvantages. To evaluate the test methods, sensitivity (percent positive agreement - PPA) and specificity (percent negative agreement – PNA) are the most common metrics utilized, followed by the positive and negative predictive value (PPV and NPV), the probability that a positive or negative test result represents a true positive or negative patient. In this paper, we illustrate how patient risk and clinical costs are driven by false-positive and false-negative results. We demonstrate the value of reporting PFP (probability of false positive results), PFN (probability of false negative results), and costs to patients and healthcare. These risk metrics can be calculated from the risk drivers of PPA and PNA combined with estimates of prevalence, cost, and Reff number (people infected by one positive SARS COV-2).

Community-level wastewater monitoring for severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) RNA has demonstrated useful correlation with both coronavirus disease 2019 (COVID-19) case numbers and clinical testing positivity. Wastewater monitoring on college campuses has demonstrated promising predictive capacity for the presence and absence of COVID-19 cases. However, to date, such monitoring has largely relied upon composite or grab samples and reverse transcription quantitative PCR (RT-qPCR) techniques, which limits the accessibility and scalability of wastewater monitoring. In this study, we piloted a workflow that uses tampons as passive swabs for collection and reverse transcription loop-mediated isothermal amplification (RT-LAMP) to detect SARS-CoV-2 RNA in wastewater. Results for the developed workflow were available same day, with a time to result following tampon swab collection of approximately three hours. The RT-LAMP 95% limit of detection (76 gene copies reaction-1) was greater than RT-droplet digital PCR (ddPCR; 3.3 gene copies reaction-1). Nonetheless, during a building-level wastewater monitoring campaign conducted in the midst of weekly clinical testing of all students, the workflow demonstrated a same-day positive predictive value (PPV) of 33% and negative predictive value (NPV) of 80% for incident COVID-19 cases. The NPV is comparable to that reported by wastewater monitoring using RT-qPCR. These observations suggest that even with lower analytical sensitivity the tampon swab and RT-LAMP workflow offers a cost-effective and rapid approach that could be leveraged for scalable same-day building-level wastewater monitoring for COVID-19.

To quantify the time-varying reproduction number (Rt) for Malaysia using the COVID-19 incidence data., we used data the from the Johns Hopkins University Center for Systems Science and Engineering (JHU CCSE) Coronavirus repository. Day 1 was taken from the first assumed local transmission of COVID-19. Data was split into four intervals: a) Interval 1: from Day 1 to Day 10 MCO 1, b) Interval 2: from Day 1 to Day 10 MCO 2, c) Interval 3: from Day 1 to Day 10 MCO 3 and d) Interval 4: from Day 1 to Day 10 MCO 4. We estimated the Rt using the EpiEstim package. The means for Rt at Day 1, Day 5 and Day 10 for all MCOs ranged between 0.665 to 1.147. The average Rt gradually decreased in MCO 1 and MCO 2. However, Rt increased in MCO 3 before stabilized around 0.8 in MCO 4. MCO 1 and MCO 2 which were stricter coincide with the gradual reduction of Rt. However, the more relaxed MCO 3 and MCO 4 correspond to a slight increase in the Rt before it stabilized.

The unprecedented COVID-19 pandemic posed major challenges to local, regional, and global economies and health systems, and fast clinical diagnostic workflows were urgently needed to contain the spread of SARS-CoV-2. Here, we describe the platform and workflow established at the Cornell COVID-19 Testing Laboratory (CCTL) for high-throughput testing of clinical samples from the university and the surrounding community. This workflow enabled efficient and rapid detection, and successful control of SARS-CoV-2 infection on campus and its surrounding communities. Our cost-effective and fully automated workflow enabled testing of over 8,000 pooled samples per day and provided results for over 2 million samples. Automation of time- and effort-intensive sample processing steps such as accessioning and pooling increased laboratory efficiency. Customized software applications were developed to track and store samples, deconvolute positive pools, track and report results and for workflow integration from sample receipt to result reporting. Additionally, quality control dashboards and turn-around time tracking applications were built to monitor assay and laboratory performance. As infectious disease outbreaks pose a constant threat to both human and animal health, the highly effective workflow implemented at CCTL could be modeled to establish regional high-capacity testing hubs for infectious disease preparedness and emergency response.

Appropriate diagnostic testing to identify persons infected with SARS-COV-2 is a vital part of a health system’s ability to control the global pandemic of COVID-19 disease. The primary purpose of this review is to provide an overview of the mass testing strategy implemented throughout the UAE and the overall impact it has made on containing and controlling the spread of the disease. This study describes the mass testing strategy and capacity of the UAE during the pandemic of the new coronavirus SARS-COV-2. The UAE has conducted 15 million polymerase chain reaction (PCR) tests to SARS-COV-2, as of 15 November 2020. The number of tests per day varied from 10,000 by the end of March to 120,000 tests per day in November 2020. The mass testing initiative across the entire UAE forms an integral part of a bigger strategy focusing on testing, tracing contacts and isolating positive cases.

Background: The epidemiological situation generated by COVID-19 has cast into sharp relief the delicate balance between public health priorities and the economy, with businesses obliged to toe a line between employee health and continued production. In an effort to detect as many cases as possible, isolate contacts, cut transmission chains and limit the spread of the virus in the workplace, mass testing strategies have been implemented in both public health and industrial contexts to minimize the risk of disruption in activity. Objective: To evaluate the economic impact of mass workplace testing strategy as carried out by a large automotive company in Catalonia in terms of health and healthcare resource savings. Methodology: Analysis of health costs and impacts based on the estimation of mortality and morbidity avoided because of screening and the resulting savings in healthcare costs. Results: The economic impact of the mass workplace testing strategies (using both PCR and RAT tests) was approximately €10.44 per test performed or €5,575.49 per positive detected. 38% of this figure corresponds to savings derived from better use of health resources (hospital beds, ICU beds and follow-up of infected cases), while the remaining 62% corresponds to improved health rates due to avoided morbidity and mortality. In scenarios with higher positivity rates and a greater impact of the infection on health and the use of health resources, these results could be up to ten times higher (€130.24 per test performed or €69,565.59 per positive detected). Conclusion: In the context of COVID-19, preventive actions carried out by the private sector to safeguard industrial production also have concomitant public benefits in the form of savings in healthcare costs. Thus, governmental bodies need to recognize the value of implementing such strategies in private settings and facilitate them through, for example, subsidies.

This article presents a new input device for spastic patients and others with similar symptoms. The sensor consists of a disc used to determine positions and can replace standard joysticks in medical devices such as electric-powered wheelchairs. Using a standard joystick while operating a powered wheelchair can result in dangerous situations when spastic movements occur and extremities cramp making them uncontrollable. To avoid this, a disc was developed that can be controlled with any body part. By shifting weight (x- and y-axis) the disc can tilt in any direction creating a proportional output signal and can also be pushed down in the center (z-axis) to open a menu on a screen for example. When spasms occur it is impossible for users to get stuck on the input device because the disc is flat and can be mounted within a control panel. Body parts coming into contact with the disc would merely slide across the disc without triggering unintentional actions. The sensor presented here is also adaptive and can be adjusted to fit a user’s strength and range of motion. This proposal aims to develop an input device that enables spastic patients to operate sensitive systems safely.

Respiratory tract infections (RTIs) are one of the main causes of hospitalization and mortality causing substantial economic burden to healthcare systems globally. As opposed to the previous belief that respiratory infections are caused by a single pathogen, studies have shown that most RTIs are a result of a combination of bacterial and/or viral pathogens infecting the host. The clinical manifestation of RTIs is very similar (i.e., syndrome), often showing Influenza-like illness (ILI) symptoms. While COVID-19 has dominated ILI over the past few years, there are many other pathogens that are responsible for ILI. In addition, it is not uncommon to have coinfections with multiple pathogens in patients presenting with ILI and that such coinfections can even exacerbate the disease severity of RTIs. Therefore, an insight into coinfections can help with accurate disease prognosis, patient care management and outcomes. The goal of this study was to identify the different organisms in symptomatic patients presenting with ILI.

A novel determination method using flow-through cartridge purification and ultra-high-performance liquid chromatography coupled to tandem mass spectrometry (UPLC-MS/MS) was developed for the identification and quantification of 30 mycotoxins (aflatoxin B1, B2, G1, G2, sterigmatocysin, T-2 toxin, diacetoxyscirpenol, roquefortine C, methylergonovine, ergocornine, lysergol, enniatin A, enniatin A1, enniatin B, enniatin B1, beauvericin, deoxynivalenol, 3-acetylDeoxynivalenol, 15-acetylDeoxynivalenol, patulin, verruculogen, neosolaniol, gliotoxin, HT-2 toxin, wortmannin, zearalenone, α-zearalenol, β-zearalenol, α-zearalanol, and β-zearalanol) in feedstuffs. Mycotoxins were extracted from sample by 0.1% formic acid aqueous solution/acetonitrile (16/84 v/v), then purified by a Cleanert® MC clean-up column. As a result, the pigments and other matrices were efficient removed from the sample extract solution. The purified eluate was collected, then evaporated and redissolved by 0.1% formic acid aqueous solution/acetonitrile (70:30 v/v) for UPLC-MS/MS detection. A BEH Shield RP18 chromatographic column was employed for separation of 30 mycotoxins in a total of 14 min. Multiple-reaction monitoring (MRM) mode was applied for qualitative and quantitative analysis, and matrix calibration curves obtained with the external-standard method was used for quantitation of target analytes. Under optimized conditions, the linearity range was from 2 to 1000 ng/g, and the limit of quantification of the developed method was from 2 to 50 ng/g. The recoveries of 30 mycotoxins spiked in urine samples were from 72.0% to 118.5%, and the relative standard deviation was below 20%. The method was also well approved by certified reference sample, and applied on the real feedstuff samples testing successfully.

Since December 2019, a rapid increase in the number of SARS-CoV-2 (COVID-19) cases was reported worldwide, despite strict infection control and lock down measures. Current paper investigated the actual facts behind this rapid increase in the number of cases. Study of genomic sequence reveals that domestic and wild animals were likely ancestors and zoonotic source for SARS-CoVs, MERS-CoVs, and SARS-CoV-2. Strong evidence suggest that these viruses already existed and replicated in animals and humans during past several decades, exhibiting diverse mutations, evolutions and self-limiting diseases, except during outbreaks. Serious zoonotic reservoir investigations are required to investigate animal transmission of SARS-CoVs and SARS-CoV-2 to limit current pandemic. This might be the reason of increasing number of cases via animals. SARS-CoV-2 has been retrospectively isolated in different studies in August 2019, several months before Wuhan announced. Hence, there is a possibility that viruses existed, went undetected, infecting subclinically, in past several years, and SARS-CoV-2 antigens and neutralizing antibodies may have been present in humans since long time. This might be another reason of increasing number of cases by screening as mass screening and antigen or antibody testing was not carried out in the past years. Randomized controlled trials are required to investigate human to human transmission by touch, as the current evidence is limited with conflicting results. As all SARS-CoVs are basically respiratory viruses, droplet precautions and infection control measures are essential, especially for hospital staff. Increased number of SARS-CoV-2 asymptomatic, or subclinical cases are detected worldwide. This silent phase of transmission can be beneficial for humans. Lack of symptoms eventually lessen virus transmission and reduce the pathogen's long-term survival and provide humoral herd immunity up to several years. Hence, seropositivity with diverse antibodies develops against mutating SARS-CoVs which will confer strong immunity during epidemics. Strategies such as identification, contact tracing and quarantine are costly and practically difficult. Hence, asymptomatic persons can continue their work with droplet precautions and standard infection control procedures, while symptomatic or sick persons can isolate themselves in their homes without the need for strict quarantine until clinical recovery, with reduced hospital visits and minimizing chances of hospital acquired infections. RT-PCR has low sensitivity and specificity, carries a high risk of handling live virus antigens, and requires difficult protocols. As viral load also sharply declines after few days of onset of infection, this technique might overlook infection. Furthermore, SARS-CoV-2 infection may be present in blood when oropharyngeal swabs are negative by RT-PCR. Additionally, RT-PCR usually gives false negative and false positive results and must be interpreted cautiously. This might be again a reason of increasing number of cases by false positive RT-PCR reporting. Moreover, antibodies against SARS-CoVs develop robustly in serum even by reduced amount of antigens. In contrast to RT-PCR, ELISA for diagnosing antibodies against SARS-CoV-2 demonstrates 100% specificity and 100% sensitivity, even in clinically asymptomatic individuals. These antibodies can be used for serologic surveys, monitoring and screening. However, screening tests for SARS-COV-2 should be avoided in unhygienic public places by nasopharyngeal swabs, which carry a high risk of further transmission, co-infection or superinfection. Such highly infectious virus must be isolated and tested in highly sterilized laboratory. Further strict international laws and policies are required to stop the possible spread of experimental viruses, biological warfare and bioterrorism.

Nebulized thrombolysis offers locally targeted therapy with potentially lower bleeding risk than systemic administration for coronavirus disease 2019 (COVID-19) respiratory failure. In a proof-of-concept safety study, adult patients with COVID-19-induced respiratory failure and a <300mmHg PaO2/FiO2 (P/F) ratio, requiring invasive mechanical ventilation (IMV) or non-invasive respiratory support (NIRS) received nebulized rt-PA in two cohorts (C1 and C2), alongside standard of care during the first two UK COVID-19 waves. Matched historical controls (MHC; n=18) were used in C1. Safety co-primary endpoints were treatment-related bleeds and fibrinogen reduction to <1.0–1.5 g/L. A dose escalation strategy for improved efficacy with the least safety concerns was determined in C1 for use in C2; patients were stratified by ventilation type to receive 40–60 mg rt-PA per day for ≤14 days. Nine patients in C1 (IMV, 6/9; NIRS, 3/9) and 26 in C2 (IMV, 12/26; NIRS, 14/26) received nebulized rt-PA for a mean (SD) of 6.7 (4.6) and 9.1(4.6) days, respectively. Four bleeding events (one severe and three mild) in three patients were considered treatment-related. No significant fibrinogen reductions were reported. Greater improvement in mean P/F ratio from baseline to end of study was observed in C1 compared with MHC [C1; 154 to 299 vs MHC; 154 to 212). In C2, there was no difference in the baseline P/F ratio of NIRS and IMV patients. However, a larger improvement in P/F ratio was observed in NIRS patients [NIRS; 126 to 240 vs IMV; 120 to 188) and they required fewer treatment days (NIRS; 7.86 vs IMV; 10.5). Nebulized rt-PA appears to be well-tolerated, showing a trend of improved oxygenation and faster recovery in patients with acute COVID-19-induced respiratory failure requiring respiratory support; this effect was more pronounced in the NIRS group. Further investigation is required to study the potential of this novel treatment approach.

This research investigates the application of Fused Filament Fabrication (FFF) in producing WC-10Co hardmetals, focusing binder formulations and understanding its influence on extrusion force and the influence of printing variables on green density of the samples. By examining the interplay between different binder compositions and backbone contents, the study aims to enhance the mechanical properties of the sintered parts while reducing defects inherent in the printing process. Evidence suggested that formulated feedstocks influenced the hardness of the sintered hardmetal, not due to microstructural changes but to macrostructural responses like macro defects introduced during printing, debinding and sintering of the samples. The results demonstrate the critical role of PP-MA content in improving part density and sintered hardness, suggesting the need for specific thermal debinding protocols tailored to each feedstock. The study provides insights into the formulation of feedstocks for hardmetal FFF, proposing a path toward refining manufacturing processes for better quality and performance of 3D printed hardmetal components.

This study aimed to delineate the longitudinal antibody responses to the Pfizer- BioNTech COVID-19 vaccine (BNT162b2) within the Ugandan subset of the Sub-Saharan African (SSA) demographic, filling a significant gap in global datasets. We enrolled 48 participants, collecting 320 specimens over 12 months after vaccination. A validated enzyme-linked immunosorbent assay (ELISA) was used to quantify SARS-CoV-2-specific IgG, IgM, and IgA concentrations (ng/ml) and optical densities (ODs). Statistical analyses included box plots, diverging bar graphs, and the Wilcoxon test with Bonferroni correction. We showed a robust SIgG response within 14 days of the primary vaccine dose, consistent with global data. Remarkably, we observed no significant surge in S-IgG levels following the booster, contrasting trends other global populations. The S-IgM response was transient, and predominantly established thresholds, reflecting its typical early emergence and subsequent decline. S-IgA increased initially but declined six months post-vaccination, in line with the temporal dynamics of mucosal immunity. Eleven breakthrough infections occurred; however, all were asymptomatic, indicating a protective effect from the vaccination regardless of the participants' initial S-IgG serostatus. The Pfizer-BioNTech COVID-19 vaccine elicited strong S-IgG responses in the SSA demographic. However, antibody dynamics distinctly differed from global data highlight the significance of region-specific research and the necessity for customized vaccination strategies.

Density is a crucial parameter for quantitatively describing the physical properties of liquids. It serves as an important indicator for scientific research, production process control, pipeline transportation, and other aspects. In oil pipeline transportation and raw material processing, real-time online measurement of liquid density is of great significance. This paper analyzes the working principle of an on-line vibrating tube densitometer and derives the fitting equation for temperature, pressure, and density；it also conducts experiments with an on-line vibrating tube liquid densitometer and establishes a traceability chain for the experimental device. The experimental setup includes a desktop densitometer system, a multi-temperature field constant temperature stirring system, a walk-in constant temperature box, an automatic blowing system, and a frequency acquisition and calculation system. The uncertainty of the device's evaluation is U= 0.08kg/m3, k=2.The experimental research on the on-line vibrating tube liquid densitometer can be carried out within the range of (650~1400) kg/m3, (10~70)℃, (0~50)bar the metrological performance of the vibrating tube densitometer can be researched by utilizing the straight tube type and the elbow type on-line vibrating tube densitometer. A preliminary study was conducted on the effects of different densities, temperatures, and pressures on the vibrating tube system's vibration cycle. The fit coefficient and error were calculated, and the experimental results were compared to the theoretical analysis to confirm the device's conformity. The study verified the device's scientific and reasonable design, and demonstrated that it is feasible to use the device for follow-up research.

COVID-19, the disease caused by the new coronavirus, SARS-CoV-2, has caused significant human and economic burden. Of the three major methods to mitigate the effect of the virus, diagnostics have become the focal point because vaccines and therapeutics, despite the intense effort of scientists worldwide, will take months to develop, test for safety and efficacy, scaleup and distribute to millions. This perspective aims to clarify some of the issues related to COVID-19 diagnostics and highlights some of the challenges key stakeholders including policymakers, businesses, managers, scientists and individuals face during this evolving pandemic.

We assessed depression, anxiety, and stress in healthcare workers (HCWs) in 2023 and the evo-lution of depression in 2023 compared with 2022. In September-November 2023, 181 HCWs from the Infectious Diseases Hospital, Cluj-Napoca, Romania, completed the Depression, Anxiety, and Stress 21 Scale (DASS-21 R), the Patient Health Questionnaire-9 (PHQ-9), and the Hamilton Anxiety Rating Scale (HAM-A). The prevalence of moderate-to-severe levels was 13.81% for DASS-Depression, 18.79% for DASS-Anxiety, 16.02% for DASS-Stress, 19.89% for PHQ-9, and 12.16% for HAM-A. Moderate-to-severe PHQ-9 clinical depression was found in 19.89% of respondents, and moderate-to-severe HAM-A clinical anxiety in 12.16%. Moderate-to-severe PHQ-9 depres-sion was significantly lower in the 2023 study group (19.89%, N=181) compared with 2022 (30.60%, N=114) (p=0.036), also within the 2022-2023 follow-up study group (N=88) (p=0.026). We did not find significant statistical differences between those infected vs. non-infected, vaccinated vs. non-vaccinated, working with vs. non-working with SARS-CoV-2 infected patients. Males were significantly more stressed (p=0.018) and anxious (p=0.034), and physicians in training had the highest prevalence of moderate-to-severe depression (31.60%), followed by physicians (25.64%). In 2023, depression, anxiety, and stress symptoms decreased but remained within a concerning range. By addressing these psychological issues, we can prevent professional crises in the healthcare system.

Cerebellar ataxia, neuronopathy, and vestibular areflexia syndrome (CANVAS) is caused by biallelic pathogenic expansions, or compound heterozygosity with other pathogenic variants in the RFC1 gene. CANVAS is estimated to be underdiagnosed, both because of the lack of formal diagnostic criteria and molecular challenges that translate to lesser access and high cost of routine testing. Our aim was to address the need for making CANVAS genetic testing routine, by designing a streamlined two-step PCR consisting of a short-allele screening PCR and a confirmatory PCR with fragment capillary electrophoresis detection. Exome sequencing of RFC1 was additionally foreseen to resolve potential compound heterozygosity cases. Specificity of our approach was evaluated using ataxia patients with known non-CANVAS diagnoses, and optimized using Southern blot confirmed CANVAS patients. We evaluated our approach by testing patients consecutively referred for clinically suspected CANVAS using first the two-step PCR, followed by exome sequencing. Our approach was able to accurately identify negative and confirm positive cases in prospectively collected suspected CANVAS patients presenting with at least three typical clinical signs. The proposed testing approach provides an alternative method able to clearly distinguish between CANVAS negative and positive cases and can be easily incorporated into the genetic diagnostic laboratory workflow.

In the field of railroad safety, effective detection of surface cracks is critical, necessitating reliable, high-speed non-destructive testing (NDT) methods. This study introduces a hybrid Eddy Current Testing (ECT) probe, specifically engineered for railroad inspection, to address the common issue of ’lift-off noise’ due to varying distances between the probe and test material. Unlike traditional ECT methods, this probe integrates transmit and differential receiver coils, aiming to enhance detection sensitivity and minimize lift-off impact. The study optimizes ECT probes employing different driver coils, emphasizing three main objectives: a) quantitatively evaluating each probe using signal- to-noise ratio (SNR) and outlining a real-time data processing algorithm based on SNR methodology; b) exploring the frequency range proximal to the electrical resonance of the receiver coil; c) examining sensitivity variations across varying lift-off distances. The experimental outcomes indicate that the newly designed probe with figure 8-shape driver coil significantly improves sensitivity in detecting surface cracks on railroads. It achieves an impressive SNR exceeding 100 for defects with minimal dimensions of 1 mm in width and depth. Simulation results closely align with experimental findings, validating the investigation of optimal operational frequency and lift-off distance for selected probe performance, determined to be 0.3 MHz and 0.5 mm, respectively. The realization of this project would lead to notable advancements in enhancing railroad safety by improving crack detection efficiency.

Starting from the fact that one of the global control strategies of the Permanent Magnet Synchronous Motor (PMSM), namely the Direct Torque Control (DTC) type control strategy, is characterised by the fact that the inner flux and torque control loop usually uses hysteresis ON-OFF type controllers and the oscillations introduced by them have to be cancelled out by the outer speed loop controller (which is usually a PI speed controller and whose performance is good around the global operating points and for relatively small variations of the external parameters and disturbances caused in particular by the load torque variation), while retaining the advantages of the DTC strategy, this paper presents the improvement of the performance of the PMSM sensorless control system using Proportional Integrator (PI), PI Equilibrium Optimizer Algorithm (EOA), Fractional Order (FO) PI, Tilt Integral Derivative (TID) and FO Lead-Lag for constant flux, and Sliding Mode Control (SMC) and FOSMC for variable flux. The performance indicators of the control system are the usual ones: response time, settling time, overshoot, steady-state error and speed ripple, plus another one given by the fractal dimension (FD) of the PMSM rotor speed signal, and the hypothesis that the FD of the controlled signal is higher when the control system provides better performance is verified. The paper also presents the basic equations of the PMSM, based on which the synthesis of integer and fractional controllers, the synthesis of an observer for estimating the PMSM rotor speed, electromagnetic torque and stator flux are presented. The comparison of the performance of the proposed control systems and the demonstration of the parametric robustness are performed by numerical simulations in Matlab/Simulink using Simscape Electrical and Fractional Order Modelling and Control (FOMCON). Real-time control based on an embedded system using a TMS320F28379D controller demonstrates the good performance of the PMSM sensorless control system based on the DTC strategy in a complete hardware-in-the-loop (HIL) implementation.

Two series of novel [1,2,4]triazolo[4,3-c]- and [1,2,4]triazolo[1,5-c]quinazoline fluorophores with 4’-amino[1,1′]-biphenyl residue at position 5 have been prepared via Pd-catalyzed cross-coupling Suzuki-Miyaura reactions. The treatment of 2-(4-bromophenyl)-4-hydrazinoquinazoline with orthoesters in solvent-free conditions or in absolute ethanol leads to the formation of [4,3-c]-annulated triazoloquinazolines, whereas [1,5-c] isomers are formed in acidic media as a result of Dimroth rearrangement. 1D-NMR and 2D-NMR spectroscopy as well as single‐crystal X‐ray diffraction analysis unambiguously confirmed the annelation type and determined the molecular structure of p-bromophenyl intermediates and target products. Photophysical properties of the target compounds were investigated in two solvents and solid state and compared with those of related 3-aryl-substituted [1,2,4]triazolo[4,3-c]quinazolines. The excluding of aryl fragment from triazole ring has been revealed to improve fluorescence quantum yield in solution. Most of the synthesized structures show moderate to high quantum yields in solution. Additionally, the effect of solvent polarity on the absorption and emission spectra of fluorophores has been studied and considerable fluorosolvatochromism was stated. Moreover, electrochemical investigation and DFT calculations have been performed, their results are consistent with the experimental observation.

Silver ion (Ag+) are recognized for their potent antibacterial properties; however, their utilization in food preservation is restricted by factors such as inadequate stability, a transient antibacterial impact, and the potential for human absorption. Hydrogel-based antibacterial agents are capable of exerting their antibacterial effects by establishing appropriate microenvironments, which facilitate the efficient delivery of antimicrobial molecules to the contaminated regions of food. In previous studies, we observed that chitosan (CS) and silver nitrate (AgNO3) were able to reduce Ag+ to silver nanoparticles (AgNPs) with enhanced antibacterial properties. This not only significantly extended the stability of the antibacterial agent but also demonstrated exceptional inhibitory capabilities against pathogenic bacteria, including common grape contaminants such as P. expansum, A. niger, and B. cinerea. Utilizing ultrasound-induced complexation technology, this study has successfully synthesized a chitosan-silver (CS-AgNPs) hydrogel. The efficacy of this hydrogel against the pathogenic fungus responsible for jujube black spot disease has been thoroughly investigated. The morphology structures of CS-AgNPs hydrogels were characterized by TEM, FTIR and UV-vis. The results indicated that AgNPs ranging from 80 to 110 nm were uniformly dispersed within the gel matrix and remained stable for extended periods at room temperature. In vitro antibacterial assays and fractional inhibitory concentration index (FICI) studies revealed that the pronounced antibacterial efficacy of the CS-AgNPs hydrogel was primarily attributed to the additive antibacterial effect of CS and AgNPs. These insights underscore the significant potential of CS-AgNPs hydrogels in combating fungal diseases of jujube, offering innovative strategies and materials for the management of agricultural pathogens.

The use of alternative fuels and electric vehicles is an opportunity to reducing exhaust emissions. We observe that the regulations on exhaust emissions from mobile sources are becoming gradually stricter on the all the world. As is widely known, using alternative fuels instead of conventional fuels helps lower vehicle emissions. The most popular alternative fuels are hydrogen, propane, biobutanol, methanol, dimethyl ether, etc. It is very important that more than a dozen alternative fuels are under development. The article contains a comparison of the operating costs of electric cars and cars with an internal combustion engine. This work shows also the characteristic of new alternative fuels and their impacts on exhaust emissions.

Regardless of the SARS-CoV-2 pandemic containment, it remains paramount to comprehensively understand its underlying mechanisms to mitigate potential future health and economic impacts, comparable to those experienced throughout the course of the pandemic. The angiotensin-converting enzyme 2 (ACE2) provide anchorage for SARS-CoV-2 binding, thus implicating that ACE and ACE2 might contribute to the variability in infection severity. This study aimed to elucidate predisposing factors influencing the disease course among people infected by SARS-CoV-2, focusing on angiotensin-converting enzyme (ACE) and ACE2 polymorphisms. Notably, despite similar demographics and comorbidities, COVID-19 patients exhibit substantial differences in prognosis. Genetic polymorphisms in ACE and ACE2 have been implicated in disease progression, prompting our investigation into their role in COVID-19 evolution. Using next-generation sequencing (NGS), we analyzed ACE and ACE2 genes in a sample group comprising six subjects infected by SARS-CoV-2. Our findings revealed a correlation between specific polymorphisms and COVID-19 outcomes. Specifically, ACE and ACE2 intronic deletions were observed in all deceased patients, suggesting a potential association with mortality. These results highlight the significance of genetic factors in shaping the clinical course of COVID-19, emphasizing the importance of further research into the impact of genetic variations on COVID-19 severity.

Background: Post-acute sequelae of SARS-CoV-2 infection (PASC) is a complicated disease that affects millions of people all over the world. Previous studies have shown that PASC impacts 10% of SARS-CoV-2 infected patients of which 50-70% are hospitalized. It has also been shown that 10-12% of those vaccinated against COVID-19 were affected with PASC and its complications. The severity and the later development of PASC symptoms is positively associated with the early intensity of the infection. Results: The generated health complications caused by PASC involve a vast variety of organ systems. Patients affected by PASC have been diagnosed with neuropsychiatric and neurological symptoms. Cardiovascular system also has been involved and several diseases such as myocarditis, pericarditis, and coronary artery diseases were reported. Chronic hematological problems such as thrombotic endothelialitis and hypercoagulability were described as a condition that could increase the risk of clotting disorders and coagulopathy in PASC patients. Chest pain, breathlessness, and cough in PASC patients were associated with respiratory system in long COVID-19 causing respiratory distress syndrome. The observed immune complications were notable, involving several diseases. Renal system also was impacted and result in raising the risk of diseases such as thrombotic issues, fibrosis, and sepsis. Endocrine gland malfunction can lead to diabetes, thyroiditis, and male infertility. Symptoms such as diarrhea, nausea, loss of appetite and taste were also among reported observations due to several gastrointestinal disorders. Skin abnormalities might be an indication of infection and long-term implications such as persistent cutaneous complaints were linked to PASC. Conclusions: Long COVID is a multidimensional syndrome with considerable public health implications, affecting several physiological systems and demanding thorough medical therapy as well as more study to address its underlying causes and long-term effects.

During a multi-detector computed tomography (MDCT) examination, it is crucial to efficiently organize, store, and transmit medical images in DICOM standard, which requires significant hardware resources and memory. Our project processed large amounts of DICOM images by classifying them based on cross-section views that may carry important information about a possible diagnosis. We ensured that images were retained and saved in PNG format to optimize hardware resources while preserving patient confidentiality. Furthermore, we have developed a graphical, user-friendly interface that allows physicians to visualize specific regions of interest in a patient's brain where changes may indicate disease. Our proposed method enables quick classification of medical images into predefined classes of confirmed diseases of brain parenchyma, contributing to swift decision-making for further diagnosis for more precisely evaluating and characterizing brain changes, and it can lead to the rapid application of adequate therapy, which may result in better outcomes.

Less aligned emphasis has been given to the COVID-19 infodemic coordinating with the COVID-19 outbreak. Global profusion of tangled monikers and hashtags has found their ways in daily communication and contributed to backlash against Chinese. Official naming efforts against infodemic should be meet with a fair share of identification. Based on brief critical reviews on previous multifarious naming practices, we punctuate heuristic introspection in scientific conventions and sociocultural paradigms. Infodemiological analysis promises to articulate that people around the globe are divided in their favor stigmatized monikers in the public and scientific communities because of perceptual bias. There is no positive correlation between the degree of infection in their territories and collective perceptual bias to COVID-19. The official portfolio “COVID-19” and “SARS-CoV-2” has not become de facto standard usages, but full-fledged official names are excepted to duly contribute to the resilience of negative perceptual bias and collective behavioral propensities.

The Covid-19 pandemic was a challenge for the whole world and it had major secondary effects on humans and environmental health. The viral infection induced, in many situations, secondary bacterial infections, especially enteric infections by destabilizing the balance of the gastrointestinal microbiota. The large-scale use of antibiotics and biocides both for curative and preventive purposes has determined an increase in bacterial resistance and at the same time the possibility of pathogenic microorganisms’ multiplication and their dissemination to natural environments. Wastewater is the main vector of faecal microorganisms that favour their dissemination into natural aquatic ecosystems. The present paper aimed to analyze the effect of Covid-19 pandemic on the microbiological quality of wastewater from sewage treatment plants in Romania and its impact on receiving rivers. In order to highlight different and important areas of Romania, 3 cities from the east, center and west were selected for a microbiological evaluation of their WWTPs influent and effluent between ante-Covid-19 and Covid-19 pandemic peak period, when the Covid-19 pandemic had a direct impact on WWTPs microbial composition. Our study showed a higher contamination with fecal bacteria linked to a higher Covid-19 incidence. The increased usage of pharmaceutical compounds, at their turn, increased the number of resistant bacteria reaching the environment via WWTP effluents.

This paper presents a design and performance analysis of a 10-element 5G massive MIMO antenna array for sub-6GHz mobile handsets, specifically for LTE bands 42 (3400-3600 MHz), 43 (3600-3800 MHz), 48/49 (3550-3700 MHz) applications. The proposed antenna array consists of 10 closely spaced linearly polarized inverted-F antennas with a compact size of 20 × 9 mm2 of a single element. The proposed antenna array provides high gain, high efficiency, and low correlation between the antenna elements, which results in improved channel capacity, increased data rate, and enhanced signal quality. The performance of the antenna array is evaluated in terms of the radiation pattern, gain, efficiency, and correlation coefficient. The simulation and measured results show that the proposed antenna array achieves an approximate peak gain of 3.1 dBi at the resonance frequency, a total efficiency of 65 %, and a low correlation coefficient of 0.06 between the antenna elements. Therefore, the proposed 5G massive MIMO antenna array is a promising candidate for sub-6 GHz mobile handsets, particularly for LTE bands 42/43/48/49 applications.

Nurses have experienced several psychological and work-related issues during the COVID-19 pandemic including pandemic burnout and job burnout. The aim of the study was to examine the impact of social support and resilience on COVID-19 pandemic burnout and job burnout among nurses. We conducted a cross-sectional study in Greece. Study population included 963 nurses. We measured social support, resilience, COVID-19 pandemic burnout, and job burnout with the Multidimensional Scale of Perceived Social Support, Brief Resilience Scale, COVID-19 burnout scale, and single item burnout measure respectively. Nurses received high levels of social support, while their resilience was moderate. Additionally, nurses experienced moderate levels of COVID-19 burnout and job burnout. Increased social support (adjusted beta = -0.075, 95% CI = -0.125 to -0.024) and increased resilience (adjusted beta = -0.399, 95% CI = -0.491 to -0.308) were associated with reduced COVID-19 pandemic burnout. We found a negative relationship between social support and job burnout (adjusted beta = -0.263, 95% CI = -0.405 to -0.121). A similar negative relationship was found between resilience and job burnout (adjusted beta = -0.529, 95% CI = -0.785 to -0.272). Social support and resilience can act as protective factors against COVID-19 pandemic burnout and job burnout among nurses. Policy makers should develop and implement appropriate strategies to improve nurses’ social support and resilience since they are the backbone of healthcare systems worldwide.

The presented work offers a novel process scheme for valorizing historical Pb-Zn slag, which involves crushing, grinding, and then using separation techniques to concentrate valuable components (nonferrous metals). This methodology could have a significant impact on the global beneficiation of metallurgical slags since, in theory, it is significantly more simple, environmentally friendly, and cost-effective than standard pyrometallurgical or hydrometallurgical procedures. According to previous physicochemical and mineralogical studies, Pb-Zn slag from "Topilnica" Veles is a valuable secondary raw material. This inhomogeneous technogenic resource contains substantial amounts of nonferrous metals (Pb, Zn, Cu, and Ag). However, laboratory tests have indicated that the Pb-Zn slag contains a very uneven valuable metals amounts, ranging from several g/ton to several tens of g/ton. The main issue is that traditional metallurgical procedures for releasing beneficial elements are not commercially viable since the valuable elements are "trapped" within amorphous aluminosilicates or intergrowths of alloy grains and glassy phases. Gravity concentration (Wilfley 13 shaking table) and magnetic separation (Davis separator and disk separator) were used to obtain the final concentrate following comminution and grindability testing. The gravity concentration proved more effective. This streamlined approach of valorizing Pb-Zn slag can reduce the need for hazardous chemicals used in hydrometallurgical refinement operations, as well as the extremely high temperatures required for pyrometallurgical processing. This is the first investigation into the feasibility of this novel approach, which includes direct investigations of the Pb-Zn slag feed using these alternative technologies. After extracting the valuable metals, the amorphous aluminosilicate part of the Pb-Zn slag can be reapplied as an alternative raw material in the building sector, adding to the circularity of the suggested approach..

We investigated humoral immune responses in 222 unvaccinated Japanese people after recovery from severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection in 2021. Anti-spike protein IgG antibody levels and neutralizing antibody titers were measured in serum samples obtained within 20–180 days after diagnosis. The geometric mean of antibody titers was 1555 ELU/mL (95% confidence interval [CI] = 1257-1923), and the neutralizing activities (50% inhibitory dilution) was 253 (95% CI = 204-313). The antibody titer and neutralizing activity both increased with increasing disease severity, and both values were approximately 4-fold higher for hospitalized patients than for non-hospitalized patients. However, these differences were smaller in older patients. The humoral immune response, which increased with increasing disease severity, gradually decreased over time after SARS-CoV-2 infection. Most patients with mild or moderate symptoms sustained neutralizing activity for up to 180 days after the infection, the decay of the neutralizing activity in the patients with asymptomatic was rather faster than other groups. 11.7% (26/222) of patients had very low neutralizing activity, and half of these were in the age of 20s. Our study results show the importance of measuring the neutralizing activity to confirm the immune status and also estimate the timing of vaccine.

The epidemiological situation generated by COVID-19 has highlighted the importance of applying non-pharmacological measures. Among these, mass screening of the asymptomatic general population has been established as a priority strategy by carrying out diagnostic tests to limit the spread of the virus. In this article, we aim to evaluate the economic impact of mass COVID-19 screenings of an asymptomatic population through a Cost-Benefit Analysis based on the estimated total costs of mass screening versus health gains and associated health costs avoided. Excluding the value of monetized health, the Benefit-Cost ratio was estimated at approximately 0.45. However, if monetized health is included in the calculation, the ratio is close to 1.20. The monetization of health is the critical element that tips the scales in favour of the desirability of screening. Screenings with the highest return are those that maximize the percentage of positives detected.

Long COVID-19 affects a significant percentage of survivors and is characterized by a wide range of symptoms, including weariness and mental fog as well as emotional symptoms like worry and sadness. COVID-19 is closely linked to the autoimmune disorders that are becoming more prevalent worldwide and are linked to the immune system hyperactivation, neutrophil extracellular trap (NET) development, and molecular mimicry pathways. Long-term COVID-related autoimmune responses include a watchful immune system, altered innate and adaptive immune cells, autoantigens secreted by living or dead neutrophils, and high concentrations of autoantibodies directed against different proteins. The microbiome, which consists of billions of bacteria living in the human body, is essential for controlling immune responses and supporting overall health. The microbiome can affect the course of long-term COVID-associated autoimmunity, including the degree of illness, the rate of recovery, and the onset of autoimmune reactions. Although the precise role of the microbiome in long COVID autoimmunity is still being investigated, new studies indicate that probiotics, prebiotics, and dietary changes—interventions that target the microbiome—may be able to reduce autoimmune reactions and enhance long-term outcomes for COVID-19 survivors. It is clear that more research is required to precisely understand how the microbiome affects COVID-19-related autoimmunity and to create tailored treatment plans.

With the rapid evolution of SARS-CoV-2, the emergence of new strains is an intriguing question. This paper presents an evolutionary theory to analyze the mutations of the virus and identify the conditions that lead to the generation of new strains. We represent the virus variants using a 4-letter sequence based on amino acid mutations on the spike protein and employ an n-distance algorithm to derive a variant phylogenetic tree. We show that the theoretically-derived tree aligns with experimental data on virus evolution. Additionally, we propose an A-X model, utilizing the set of existing mutation sites (A) and a set of randomly generated sites (X), to calculate the emergence of new strains. Our findings demonstrate that a sufficient number of random iterations can predict the generation of new macro-lineages when the number of sites in X is large enough. These results provide a crucial theoretical basis for understanding the evolution of SARS-CoV-2.

Healthcare crises occur occasionally are very disruptive and resource consuming. The Covid-19 pandemic provided an example of inefficient wasteful resource management that would be unsustainable in the long term. This paper presents a framework for sustainable crisis management that will be applicable for future crises. The methodology is also applicable to other pandemics, wars, multi-casualty natural disasters, industrial disasters, etc. Attention focuses on rapid crisis resolution such as lockdowns. Despite unprecedented investments in healthcare, lack of capacity and timeliness are still problems affecting every country, even the wealthier ones. During the Covid19 pandemic, some healthcare systems around the world have collapsed. For example, Brazil, Spain, Italy, and more. This is due to the lack of a clear methodology for handling such crises. This paper presents a resource-based methodology to cope with healthcare crises considering three scenarios: “Peace”, “War” and “Tsunami”. The paper outlines a methodology for identifying the system bottlenecks for coping with the crisis in each scenario by using established simple tools. These tools assure significant resource frugality that will enhance sustainability. The paper also analyses where the system constraint should be and prescribes how to prepare for such scenarios. A large medical center case study demonstrates our approach. During “peace” times, evolutionary strategies should be used exclusively. During “war” times, a hybrid – evolutionary/disruptive (revolutionary) strategy. During the “Tsunami” scenario, one should rely only on the disruptive (revolutionary) strategy. This methodology can be extended to other scenarios and other lines of research.

COVID-19 infection is extremely dangerous for persons with comorbidities such as kidney disease and diabetes. Although many people of all ages and socioeconomic backgrounds have suffered due to this pandemic, those with underlying medical conditions like kidney disease and diabetes are more vulnerable to becoming infected with COVID-19 related to weak immunity. However, the role of vaccination in the co-infection of COVID-19 with diabetics is not available in the literature. Therefore, we examine the unique challenges presented by the co-infection of COVID-19 in individuals with diabetes, focusing on its disease transmission dynamics. A mathematical modelling technique is to be employed in this work to analyse the dynamics of COVID-19 outbreaks with seven compartments, including vaccination with comorbidities such as diabetes. We also investigated analytically by displaying the solutions' existence, boundedness, positivity and sensitivity. After calculating the basic reproduction numbers, the stability analysis of model equilibrium points is also covered. If the reproduction numbers are less than unity, the disease-free equilibrium points of the model appear to be both locally and globally stable. The findings of this study are that as the vaccination rate rises, the incidence of COVID-19 and its co-infections with diabetes decreases. Effective disease treatment strategies may be based partly on the possible impact of vaccination on the co-infection of COVID-19 related to diabetic disease insights.

Pathological cleavage of collagen type II (Col2) and generation of Col2 neoepitopes can be good molecular markers of progression of osteoarthritis (OA). One of such potential biomarkers is collagen type II neoepitope C2C. The aim of this study was to correlate the degree of articular cartilage damage in OA patients with C2C expression in histological samples of tissues removed during total knee replacement. Cartilage samples were obtained from 27 patients aged from 55 to 66. In each patient medial and lateral tibia plateau samples were analyzed according to the OARSI histopathology grading system. C2C expression was evaluated on histological slides by semi-quantitative analysis using ImageJ Fiji software. Spearman´s rank correlation analysis showed significant positive correlation (rho=0.289, P=0.0356) between the histological grade of tissue damage and the percentage of C2C staining. In addition, highly significant positive correlation (rho=0.388, P=0.0041) was found between osteoarthritis score (combining the histological grade of damage with the OA macroscopic stage) and the percentage of C2C staining in the samples. The C2C expression was found in all the regions of the articular cartilage (i.e. the superficial zone, mid zone, deep zone and tidemark area and the zone of calcified cartilage). Our study suggests that local expression of C2C correlates with the cartilage damage in the knee affected by OA. This further assures that C2C can be a perspective marker for evaluation of pathological processes in OA course and OA clinical trials.

In this study, 10%PTFE/PEEK blend were modified by potassium titanate whisker (PTW) and chopped glass fiber (GF), respectively. The blends were prepared by three-screw extruder. Through the investigation of thermal stability, tribological properties, mechanical properties and rheological behavior, the effects of reinforcing agents were determined. The results illustrated that the mechanical properties of 10%PTFE/PEEK blend can be dramatically improved by adding reinforcing agent of PTW or GF, and the reinforcing effect of GF was especially obvious. As for tribological properties, 1% addition was the best proportion. The friction coefficient and wear rate of the blend with 1% PTW were 0.283 and 4.97 × 10^-6 mm³/N · m, which decreased by 7.2% and 21% compared with those of the blend without reinforcing agent.

Sustainability is a concept shrouded in abstraction. While we have definitions in existence, it is often difficult to explain the concept itself. The current definition of ‘sustainable development’ was given by the Brundtland Commission’s report in 1987. The Earth Summit at Rio in 1992 gave us Agenda 21, an action plan to achieve sustainable development. Now in the 21^st century, philosophers, academicians, and researchers across the globe are paving the way for a new understanding of the term ‘sustainability’, its contextual nature, and its relation to humans, politics, and ecology. This article investigates the origins of the term ‘sustainability’, its derivatives, and the concept of sustainable development. A semantical analysis is carried out to understand the differences between ‘sustainability’ and ‘sustainable development’. Next, the development of the three pillars of sustainability and the application of these concepts in the field of architecture and design is also investigated.

Introduction. Grilling more and more sophisticated dishes is often a popular activity. Marshmallows are confectionery products popular among children and teenagers worldwide. They are available in many supermarkets ready to be grilled. As such, grilled marshmallows can be a source of exposure to harmful compounds, including carcinogenic polycyclic aromatic hydrocarbons (PAHs). Method. PAHs analysis in marshmallows grilled under different conditions included the dilution stage with deionized water and liquid-liquid extraction with cyclohexane and solid- phase extraction (SPE on silica gel columns). PAH fractions were initially analyzed via planar chromatography (HPTLC-high performance thin layer chromatography) and PAH concentrations were determined via GC-MS/MS (gas chromatography with a tandem mass detector) using the selective reaction monitoring (SRM) mode. This study on the consumption of grilled marshmallows was conducted among approximately 300 children and adolescents. Results. The preliminary results of HPTLC and GC-MS/MS analysis indicated that “raw” marshmallows did not contain PAHs. However, the obtained data suggested a high exposure of young people to carcinogenic PAHs from grilled marshmallows. Carcinogenic BaP was determined in all samples and constituted, on average, 36% of total PAH4. Conclusions. The profile of PAH concentrations in the extracts isolated from various grilled types of marshmallows was very similar (r 2 &gt; 0.8), regardless of the grilling method. Compared to the white sugar confection, the higher concentrations of PAHs were determined in multicolored marshmallows. The lack of social awareness about the exposure to carcinogenic substances is alarming.

The COVID-19 pandemic which have affected every part of the world have been deemed a public health concern and classified as a pandemic. The government imposing travel bans and quarantine measures have been found to be effective in preventing and reducing the spread of COVID-19. A reduction in physical activity and increase in the consumption of unhealthy foods have been observed to be some of the major implications of quarantine. Adequate physical activity and increased access to healthy foods would help in improving the psychological wellbeing of individuals thereby preventing the development of cardiovascular diseases.

The persistence of symptoms following COVID-19 infection represents a significant challenge in healthcare management. During the outbreak, tele-rehabilitation emerged as a new tool to support healthcare structures in providing rehabilitation services. This study assessed the effectiveness and the feasibility of a 3-week home-based motor and respiratory rehabilitation program for long COVID-19 individuals after traditional rehabilitation. Twenty-three patients completed the program and underwent functional tests at different time points (i.e. baseline, after hospital discharge, and after tele-rehabilitation). Motor function was evaluated using the instrumented Six-Minutes Walking Test (i6MWT), with monitored heart rate and oxygen saturation. Conversely, respiratory function was measured via forced vital capacity (FVC) and maximal voluntary ventilation (MVV) tests. Significant improvements (p &lt; 0.05) in motor and respiratory function were observed throughout the intervention, including an 18.3% increase in walked distance from the baseline. The findings suggest that a home-based tele-rehabilitation can enhance motor and respiratory function in post-COVID patients. Despite limitations such as sample size and lack of control group, the positive outcomes seem to support the feasibility of the proposed tele-rehabilitation program in managing long COVID symptoms and promoting functional recovery. Further research is needed to validate these findings and explore tele-rehabilitation’s potential in broader patient populations.

The metabolites secreted by probiotics or released after their lysis are called postbiotics. They provide physiological benefits to the host, preventing the colonisation of pathogens by improving the intestinal environment for beneficial commensal bacteria, which reduces the incidence of digestive disorders and improve the immune system. The aim of this work was to evaluate the addition of postbiotics to dairy cow rations during the transition period on nutrient digestibility, composition, and milk yield. The effects of two postbiotics were evaluated in twelve Friesian cows from 30 days before calving to two months of lactation. The animals were randomly allocated to the treatments control (CT) and supplemented with postbiotics (PC and PR). Feeding was ad libitum with 60/40 of forage/concentrate ratio. Daily feed intake and milk production were recorded individually throughout the study. Two digestibility balances were performed, one before parturition and one after parturition. Colostrum was sampled at first milking and milk was sampled weekly. Data were analysed using a mixed mode in R software. The results suggest that postbiotic supplementation in late gestation and early lactation increase the voluntary intake of dry matter, especially in the PR treatment, with higher apparent total tract digestibility of dry matter, organic matter and neutral detergent fiber. Both treatments including postbiotics induced an increase in colostral immunoglobulin concentration. Milk production of cows receiving the PC treatment was the highest, with high fat and protein yields and a higher persistence of the production curve throughout the lactation.

(1) Background: The interplay between coronavirus disease 2019 (COVID-19) and laryngeal cancer represents a substantial challenge for both patients and healthcare. To garner information on recent mortality data for laryngeal cancer, including during the COVID-19 pandemic, we analyzed real-world data from the US Centers for Disease Control and Prevention (CDC). (2) Methods: We searched the CDC WONDER on-line database 2018-2022 using with the ICD-10 code for laryngeal cancer (C32; malignant neoplasm of larynx). We also performed a sub-analysis between genders, and across ten-year age groups. Data were analyzed with one-way analysis of variance (ANOVA) and Tukey post-hoc test. (3) Results: The trend of age-adjusted mortality ×100,000 did not change significantly between 2018-2022 (p=0.553). Males had higher age-adjusted mortality rates (M/F ratios between 4.6 and 5.0), but no significant variation was found in both genders (males: p=0.676; females: p=0.596). Although the mortality rate remained unchanged in people aged 35-84 years, the variation reached statistical significance in those aged 85 or older (p=0.004), displaying significant increase in 2021 compared to 2018 (p=0.006) and 2019 (p=0.039). (4) Conclusions: The impact of the COVID-19 pandemic on mortality for laryngeal cancer seemed to be relatively modest in the general US population. Nevertheless, closer attention must be paid to older people, in whom the unfavorable consequences of misdiagnosis or mistreating can be exacerbated.

Background: Our study investigates the prevalence and causes of injuries among undergraduate dental students during clinical sessions. Methods: The study was conducted at the Department of Dentistry, National and Kapodistrian University of Athens, focusing on injuries reported from 2021 to 2024. Data were collected through self-reported questionnaires and clinical records. The primary variables assessed included the type of injury, the instrument involved, the clinical procedure being performed, and the immediate actions taken post-injury. Serological testing was conducted on both students and patients to assess the risk of bloodborne pathogen transmission. Results: The findings revealed a high prevalence of injuries, with needles being the most common cause, followed by burs and dental probes. The most frequent injury type was piercing, primarily affecting the fingers. Periodontal treatments, restorative procedures, and endodontic treatments were the main activities leading to injuries. Despite normal medical records for most patients treated by injured students, serological testing showed significant positivity rates for HCV and HBV. It is noteworthy that most injured students demonstrated their commitment to safety by adhering to recommended post-exposure protocols, including wound cleaning, disinfecting, and serological testing. Our study highlights the critical need for enhanced biosafety awareness and training among dental students to reduce injury risks. Conclusions: These findings underline the necessity for integrated safety protocols and continuous education to improve clinical practices and ensure student safety.

Mechanical properties of cardiomyocytes from different transmural regions are heterogeneous in the left ventricular wall. The cardiomyocyte mechanical environment affects this heterogeneity because of mechano-electric feedback mechanisms. In the present study, we investigated the effects of load upon transmural differences in contraction of subendocardial (ENDO) and subepicardial (EPI) single cells isolated from the murine left ventricle. Various loads were applied to the cells using carbon fiber techniques for single myocytes. To simulate experimentally obtained results and to predict mechanisms underlying the cellular response to change in load, our mathematical models of the ENDO and EPI cells were used. Extent of the transmural gradient in the time course of contractions was independent of the loading conditions where unloaded and heavy loaded (isometric) contractions were examined, but the regional gradient of the relaxation time characteristics tended to decrease when the load decreased. Under auxotonic contractions, time to peak contraction (T_max) was significantly longer in ENDO cells than in EPI cells at low preload. An increase in preload (axial stretch) prolonged T_max in both cell types; however, the prolongation was greater in EPI cells, resulting in a decrease in transmural gradient in T_max at high preload. The [Ca²⁺]_i transient decay time constant was consistent with the greater preload dependency in T_max of EPI cells. Our modified mathematical models reproduced experimental results, suggesting that differences in cooperativity of cross bridges and calcium troponin C complex interactions between the ENDO and EPI cardiomyocytes may contribute to the different cellular responses to stretch, which may provide a decrease in transmural dispersion of cellular shortening in the intact heart.

Molnupiravir, a prodrug known for its broad antiviral activity, demonstrated efficacy in animal models of Covid-19, prompting clinical trials where initial results indicated a significant effect against the disease. However, subsequent clinical studies did not confirm these findings, leading to the rejection of molnupiravir for permanent market authorization in many countries. This report critically assessed 19 studies published in 17 reports that investigated the efficacy of molnupiravir in animal models of Covid-19 with the purpose of determining how well the design of these models informed human studies. We found that the administered doses of molnupiravir in most studies involving animal Covid-19 models were disproportionately higher than the dose rec-ommended for human use. Specifically, when adjusted for body surface area, half of the doses of molnupiravir used in the animal studies were more than twice as high as the human dose. Addi-tionally, the drug was frequently given prophylactically or shortly after SARS-CoV-2 inoculation in these models, in contrast to clinical trials where such timing is not consistently achieved. Furthermore, the recommended five-day treatment duration for humans was exceeded in several animal studies. Collectively, we suggest that these design elements in the reported animal studies contributed to a bias favoring molnupiravir, and thus inflated expectations for its efficacy against Covid-19. Addressing these elements may offer avenues to enhance the clinical efficacy of mol-nupiravir for treatment of Covid-19 that include dose increment, early treatment, and admin-istration by inhalation along with use of molnupiravir in antiviral combination therapy.

SARS-CoV 2 also known as COVID-19 is a fast spreading coronavirus related disease that emerged from China in December 2019 and is currently attained the status of a pandemic. There are currently no drugs/ vaccines against the same and moreover limited diagnostic tests to identify the infection. Additionally, these tests are expensive and hence are exclusive for very highly suspected cases of the disease especially in developing countries. This is causing an under-diagnosis which is an alarming state of affairs, as even a single missed SARS-CoV 2 case would spread the disease exponentially and keep it in the community. Through this entirely in silico study, we have developed a cheaper and faster diagnostic method based on simple PCR and restriction enzyme digestion, commonly used in restriction fragment length polymorphism (RFLP) tests. Through comparative genomics, we found the closest neighbours of SARS-CoV 2 then found the highly conserved regions of the genome which were absent in SARS-CoV 1, its closest neighbour. Then we found restriction sites for various enzymes followed by designing of PCR primers flanking those sites. We have found the primer pair to produce a 401 bp amplicon and when digested by SwaI enzyme, it produces two fragments of lengths 216 bp and 185 bp. As an internal control, GAPDH primers are pooled with the SARS-CoV 2 primers as the patient sample will also include human RNA mixed with the viral RNA. This primer pair gives an amplicon of 131 bp and hence a negative sample should show a single band of 131 bp while a positive digested sample will give three bands of 401 bp, 216 bp and 131 bp. The primers are specific to SARS-CoV 2 only and can additionally be used for SYBR green based real time quantification of viral load. The developed tests have not yet been tested in vitro due to stressed out working hours in the only pathogenic virus handling laboratory in our institute. Nonetheless, this study works as a head start for other laboratories to rapidly test the suggested protocols in vitro and make available a cheaper alternative test for SARS-CoV 2 which would especially be beneficial for the lower to middle income countries.

Computer simulation of normal and diseased human heart activity requires a 3D anatomical model of the myocardium, including myofibres. For clinical applications, such a model has to be constructed based on routine methods of cardiac visualisation such as sonography. Symmetrical models are shown to be too rigid, so an analytical non-symmetrical model with enough flexibility is necessary. Based on previously made anatomical models of the left ventricle, we propose a new, much more flexible spline-based analytical model. The model is fully described and verified against DT-MRI data. We show a way to construct it on the basis of sonography data. To use this model in further physiological simulations, we propose a numerical method to utilise finite differences in solving the reaction-diffusion problem together with an example of scroll wave dynamics simulation.

Background: HIV poses a threat to global health. With effective treatment options available, education and testing strategies are essential in preventing transmission. Text messaging is an effective tool for health promotion and can be used to target higher risk populations. This study reports on the design, delivery and testing of a mobile text messaging SMS intervention for HIV prevention and awareness, aimed at adults in the construction industry and delivered during the COVID-19 pandemic. Method: Participants were recruited at Test@Work workplace health promotion events (21 sites, n=464 employees), including health checks with HIV testing. Message development was based on a participatory design and included a focus group (n=9) and message fidelity testing (n=291) with assessment of intervention uptake, reach, acceptability, and engagement. Barriers to HIV testing were identified and mapped to the COM-B behavioural model. 23 one-way push SMS messages (19 included short web links) were generated and fidelity tested, then sent via automated SMS to two employee cohorts over a 10-week period during the COVID-19 pandemic. Engagement metrics measured were; opt-outs, SMS delivered/read, number of clicks per web link, and four two-way pull messages exploring repeat HIV testing, learning new information, perceived usefulness and behaviour change. Results: 291 people participated (68.3% of eligible attendees). A total of 7,726 messages were sent between March and June 2020, with 91.6% successfully delivered (100% read). 12.4% of participants opted out over 10 weeks. Of delivered messages, links were clicked an average of 14.4%, max 24.1% for HIV related links. The number of clicks on web links declined over time (r= -6.24, p=0.01). Response rate for two-way pull messages was 13.7% of participants. Since the workplace HIV test offer at recruitment, 21.6% reported having taken a further HIV test. Qualitative replies indicated behavioural influence of messaging on exercise, lifestyle behaviours and intention to HIV test. Conclusion: SMS messaging for HIV prevention and awareness is acceptable to adults in the construction industry, has high uptake, low attrition and good engagement with message content, when delivered during a global pandemic. Data collection methods may need refinement for audience and effect of COVID-19 on results is yet to be understood.

Deep learning is based on matrix computing with a large amount of hidden parameters that is not visible outside the computing module. Deep learning is a non-linear system and a linear approach is not possible. It is natural for people to visualize the algorithm and to follow some hidden parameters. In this paper, we propose a simple graphical programming of a nonlinear system based on drawing the simplest unit, such as a single neuron model. A more complex scheme of a classical neural network is obtained by commands copy-move-place of one neuron. The number of neurons and layers can be chosen arbitrarily. Once the scheme is complete, the implementation code is evaluated with symbolic parameters and nonlinear activation functions. This cannot be done manually. With the symbolic expression of outputs in terms of inputs and symbolic parameters, including symbolic activation pure functions, some other properties can be derived in closed form. This unique original approach can help scientists and developers and design numerical algorithms for machine learning and to understand how deep learning algorithms work.

Background Augmented reality (AR) in surgery can offer an enhanced view of reality through the superimposition of computer-generated digital images on the real environment. It allows surgeons to integrate image visualisation, improving operative efficiency, surgical outcomes, surgical training and patient education. This review aims to evaluate the current status of augmented reality in surgery, surgical training and potential future applications. Methods We performed a non-systematic review of available literature from January 2005 to August 2021 by searching PubMed, EMBASE and the Cochrane library using a combination of terms “augmented reality”, “virtual reality”, “surgery”, “simulation” and “training”. Articles considered for this review were identified by relevant search criteria including title, keywords, abstract, and full-text. Conclusions AR technologies present an exciting new trend with multiple potential applications in surgery. Intraoperative AR systems have shown promise in specialties involving fine movement of organs during surgical procedures, including Neurosurgery, Ears, Nose and Throat and Orthopaedic Surgery. AR has also exhibited the potential to enhance surgical training and improve knowledge acquisition; it can foster international collaborations via telesurgery and telepresence. In the near future, AR will likely work in symbiosis with surgeons, serving as a complex computer-human coalition which can improve patient outcomes, patient education and surgical training.

Using numerical simulation method, combined with the pre-branch material characteristics of the measurement results, based on the LS-DYNA software to simulate the branch crushing process, the analysis found that not only the existence of the cutter cutting in the branch destruction process, there is also the cutting of the opposing surface of the bending fracture, with the increase in the speed of the knife rollers, the cutter cutting resistance increases, the cutting resistance reaches 2690 N when the cutter at 2500 r/min, the cutter cutting resistance is the smallest in the cutting simulation at the blade angle of 55°, the blade angle is more suitable for the cutting of the branch. In the cutting simulation under different cutting edge angles, the cutting resistance of the tool is the smallest when the edge angle is 55°, which is 1860 N. This edge angle is more suitable for branch crushing and cutting. Using Fluent software to analyse the airflow characteristics of the crushing device, it was found that with the increase of the knife roller speed, the inlet flow and negative pressure of the crushing chamber are increasing, the speed of 2500 r/min, the inlet flow and negative pressure were 1.92 kg/s and 37.16 Pa, which will be conducive to the feeding of branches, but the speed is too high and it will also lead to the enhancement of the vortex of part of the area in the crushing device, which will affect the feeding of branches and the throwing of the crushed material. affect the feeding of branches and the throwing out of crushed materials, and finally determined the speed range of the crushing knife roller is 1800 ~ 2220 r/min. Based on ANSYS/Model module modal analysis of the crushing knife roller, the knife roller of the first six orders of the intrinsic frequency and vibration pattern, crushing knife roller of the lowest order of the modal intrinsic frequency of 137.42 Hz, much larger than the crushing knife roller operating frequency of 37 Hz, the machine will not resonate during operation.

Salmonella is a foodborne pathogen associated with localized outbreaks that potentially pose a huge risk to the public health in some countries such as Africa and India, especially in the regions lacking health care measures. The focus of the present study is the molecular detection method of salmonella. The study was conducted to identify Salmonella strains by PCR targeting flagellin specific gene from suspected patient’s clinical blood samples. Serologically, Widal test results showed that all serum samples except one patient (ID 7) were positive for O antigen. The serum of three patients (ID 4, 5 and 10) were found to be positive for H and O antigens while one patient (ID 9) showed agglutination for antigen H. The PCR approach used in this study was successful for fast and precise detection of clinically related Salmonella Typhi. Seven samples out of 10 were positive for Salmonella Typhi as fragments of 458-497bp were observed on the gel-agarose 0.8% corresponds to flagellin gene of S. Typhi. Relatively, smaller amplicons of 366-343bp were observed utilizing nested PCR as well, which seems more sensitive than the conventional PCR. Therefore, we recommend the PCR approach performed in this study to be used as a fast, cost-effective, and time-consuming tool for diagnostic purposes of Salmonella.

We introduce a series of twisted donor-acceptor (D-A) carbazole-benzophenone based electroactive bipolar derivatives that were synthesized through the reaction of 4-fluorobenzophenone with various partially alkylated 3,3’-bicarbazoles. The comprehensive structural characterization of these compounds is provided. These amorphous materials exhibit suitable glass transition temperatures ranging from 57 to 102 °C and demonstrate high thermal stability, with decomposition temperatures reaching 400 °C. Moreover, the developed materials exhibit elevated photoluminescence quantum yields (PLQY) of up to 75.5% and favorable HOMO-LUMO levels, along with suitable triplet-singlet state energy values. Due to their good solubility and suitable film-forming properties, all the compounds were evaluated as blue emitters dispersed in 4,4’-bis(N-carbazolyl)-1,10-biphenyl (CBP) host for the fabrication of organic light-emitting diodes (OLEDs) in concentration dependent experiments. Among these experiments, the device containing 15 wt% of the guest 4-(9’-{2-ethylhexyl}-[3,3’]-bicarbazol-9-yl)benzophenone demonstrated the best characteristics, achieving maximum brightness of 3581 cd/m2, current efficiency of 5.7 cd/A, power efficiency of 4.1 lm/W and external quantum efficiency of 2.7%.

Determining the genetic contribution of susceptibility to severe SARS-CoV-2 infection outcomes is important for public health measures and individualized treatment. Through intense research on this topic, several hundred genes have been implicated as possibly contributing to the severe infection phenotype(s); however, the findings are complex and appear to be population-dependent. We aimed to determine the contribution of human rare genetic variants associated with a severe outcome of SARS-CoV-2 infections and their burden in the Slovenian population. A panel of 517 genes associated with severe SARS-CoV-2 infection were obtained through an extensive review of the literature, and additionally included target genes identified by the COVID-19 Host Genetic Initiative, as well as the curated Research COVID-19 associated genes from PanelApp, England Genomics. Whole genome sequencing was performed using PCR-free WGS on DNA from 60 patients hospitalized due to severe COVID-19 disease, and the identified rare genomic variants were analyzed and classified according to the ACMG criteria. Background prevalence in the general Slovenian population was determined by comparison with sequencing data from 8025 individuals included in the Slovenian genomic database (SGDB). Results show that several rare pathogenic/likely pathogenic genomic variants in genes CFTR, MASP2, MEFV, TNFRSF13B, and RNASEL likely contribute to the severe infection outcomes in our patient cohort. These results represent an insight into the Slovenian genomic diversity associated with severe COVID-19 outcome.

The G protein-coupled receptor (GPCR) Smoothened (Smo) is a central signal transducer of the Hedgehog (Hh) pathway which has been linked to diverse forms of tumours. Stimulated by advancements in structural and functional characterisation, the Smo receptor has been recognised as an important therapeutic target in Hh-driven cancers, and several Smo inhibitors have now been approved for cancer therapy. This receptor is also known to be an oncoprotein itself and its gain-of-function variants have been associated with skin, brain, and liver cancers. According to the COSMIC database, oncogenic mutations of Smo have been identified in various other tumours, although their oncogenic effect remains unknown in these tissues. Drug resistance is a common challenge in cancer therapies targeting Smo, and data analysis shows that healthy individuals also harbour resistance mutations. Based on the importance of Smo in cancer progression and the high incidence of resistance towards Smo inhibitors, this review suggests that detection of Smo variants through tumour profiling could lead to increased precision and improved outcomes of anti-cancer treatments.

Objectives: Aim to assess the perceptions of virtual learning among dental residents and faculty and employ Regulatory Focus Theory (RFT) to understand the impact of motivational orientations on virtual learning during COVID pandemic. Methods: 46 dental residents and 10 faculty in Upstate New York participated in the study (June -August 2021). Questionnaires were used to collect demographics, perceptions of virtual learning, burnout, and RFT types (promotion and prevention focus). Multiple regression analyses were used to examine factors associated with perceptions of virtual learning and burnout. Results: Overall, 70% of residents and 44% of faculty found virtual learning effective. Younger residents with less experience preferred virtual learning more than their older, experienced peers. Residents trained outside the U.S. and Canada favored in-person learning more than those trained within. Furthermore, residents with a higher promotion focus score found virtual learning more interactive for didactic courses. Additionally, 52% of residents experienced burnout, with a higher incidence among females (p=0.044). Conclusions: Virtual learning is well-received by dental residents and faculty, with potential for continued use post-pandemic. Future efforts should focus on creating an inclusive and supportive educational environment that meets the motivational and well-being needs of dental residents and faculty.

The ongoing COVID-19 pandemic is shaking the foundations of public health governance all over the world. Researchers are challenged by informing and supporting authorities on acquired knowledge and practical implications. This commentary applies established theories of risk perception research to COVID-19 and reflects on the role of risk perceptions in these unprecedented times. Moreover, it calls for utilizing the knowledge on risk perception to improve health risk communication, build trust and contribute to a collaborating governance.

SARS-CoV-2 is an obligatory intracellular pathogen that requires of a lipid bilayer membrane for its transport, to build its nucleocapsid envelope and to fuse with the host cell. The biological membranes are constituted by phospholipids (PLs) and vitamin E (Vit E) protects them from oxidative stress (OS). The aim of this study was to demonstrate if the treatment with Vit E restores the modified profile of the FA in PLs in serum from patients with coronavirus disease-19 (COVID-19). We evaluated Vit E, total fatty acids (TFA), fatty acid of the phospholipids (FAPL), total phospholipids (TPLs), 8-isoprostane, thromboxane B2 (TXB2), prostaglandins (PGE2 and 6-keto-PGF1α), interleukin-6 (IL-6) and C-reactive protein (CRP) in serum from 22 COVID-19 patients before and after treatment with Vit E and compared the values with those from 23 healthy subjects (HS). COVID-19 patients showed a decrease in Vit E, TPLs, FAPL and TFA in serum in comparison to HS (p≤0.01) and Vit E treatment restored their levels (p≤0.04). Likewise, there was an increase IL-6 and CRP in COVID-19 patients in comparison with HS (p≤0.001) and the treatment with Vit E decreased their levels (p≤0.001). Treatment with Vit E contributes to restore the modified profile of the PLs in the SARS-CoV-2 infection and this leads to a decrease of OS and of the inflammatory process.

Fatigue and dyspnea are the most commonly presented long-term complaints in individuals previously infected with SARS-CoV-2. The purpose of the study was to comprehensively evaluate diaphragm muscle function in COVID-19 survivors, as well as investigate whether potential diaphragm dysfunction will contribute to physical functioning impairment. 46 patients qualified to pulmonary rehabilitation were examined. Diaphragm muscle function parameters were evaluated using ultrasonography, while severity of dyspnea, aerobic capacity and amount of energy used by the body during physical activity were assessed by 6-minute walk test, mMRC scale and Metabolic Equivalent Task (MET), respectively. We identified 69.5% patients with diaphragm atrophy and 6.5% with diaphragm paralysis. Percentage of atrophy was not related to age, gender, BMI index, oxygen therapy use during COVID-19 infection course and severity of disease. Patients with presence of cough, fever and without loss of smell during COVID-19 course had a significantly greater values of diaphragm inspiratory thickness, while patients with cough and no smell disorders had a significantly lower percentage of diaphragm atrophy. Diaphragm functional parameters were strongly associated with selected variables of person's exercise tolerance, such as distance in 6-minute walk test, saturation level, fatigue and exertion in Borg scale. In conclusion, diaphragm muscle dysfunction is a serious long-term post-COVID aftermath and can be viewed as a major contributing factor of prolonged functional impairments.

The COVID-19 pandemic had profound negative effects on millions of couples affected by infertility and in need to resort to assisted reproductive technologies. There is no consensus over the optimal way and moment of screening triage-negative asymptomatic patients and staff. We present SARS-CoV-2 antibodies’ (IgM, IgG) seroprevalence in 516 triage-negative patients and 30 fertility care providers. The sampling for SARS-CoV-2 serological assays took place from the lockdown release throughout the second half of 2020 (17.05 - 01.12.2020). It revealed an increased seroprevalence of antibodies that closely followed the local epidemiology of COVID-19, with the highest rate of seropositivity coincident with the peak of the second wave. From 546 triage-negative individuals whose blood samples were assessed for SARS-CoV-2 antibodies, 6% yielded positive results. The overall seroconversion rate was 2.8% for IgG and 5.1% for IgM. In the group with positive IgM, we observed a negative predictive value for IgM of 98.36% (95% CI: 88.79 – 99.78%), which is clinically meaningful. Serological testing of triage-negative patients up to seven days prior to the actual fertility procedure might avoid the more expensive and not more sensitive molecular testing currently being used for patient screening in most fertility units.

Understanding HCPs COVID-19 vaccine concerns can provide critical insights to optimize success of the vaccine rollout program as they are a trusted source of health information to patients and the general population. We sought to understand reasons for health care providers’ COVID-19 vaccine hesitancy in Kenyatta National teaching and referral Hospital. From April to July 2021, we interviewed 60 HCPs purposively sampled from the Infectious Disease Unit (IDU) (n=20) and other departments (n=40). We analyzed data using inductive and deductive approaches to understand reasons for COVID-19 vaccine hesitancy. The HCPs had a median age of 37 years, (Interquartile range: [IQR 20.0-58.0]), 57% were female, 30% nurses among other cadres. Most HCPs cited low confidence in the vaccine such as mistrust in healthcare system and government, vaccine safety and efficacy concerns. Constraints such as uncertainty about the second vaccine dose availability, and misinformation caused hesitancy. Further, few were reluctant receiving the vaccine because of perceived herd immunity from a recent COVID-19 infection, and the need for more information before deciding. The study highlights the need to address any misinformation about vaccines safety and efficacy, and ensure accurate information is easily accessible to HCPs which can translate to higher vaccine uptake.

Background: The effect of COVID-19 infection, versus the indirect effect of the pandemic on body composition remains unclear. This study investigates long-term changes in body composition in COVID–19 survivors compared to a contemporary control group. Method: This is a prospective study involving adults who had a pre-pandemic whole-body DXA scan (DXA#1) performed between 2017 and 2019. Participants were asked to return for a repeat whole-body DXA scan (DXA#2) after the pandemic. Detailed data were collected including medical and COVID history. Inflammation markers and fasting lipids were measured. For those participants who had a COVID-19 infection between the 2 DXAs, DXA#2 was acquired at least one year after COVID-19 infection. Results: Overall, 160 adults were enrolled; 32.5% females, 51.8% non-white, with mean age of 43.2 years. Half (n=80) of the participants had documented COVID infection between their 2 DXA scans (COVID+ group), and the other half never had COVID. COVID-negative participants had an increase in annualized trunk fat (g) [922.5 vs. 159.7; P=0.01], total fat (g) [1564.3 vs. 199.9; P=0.2], and LBM (g) [974.9 vs. -64.5; P=0.0002], when compared to COVID+ group. However, among the COVID+ group, no differences were seen in annualized trunk fat, total fat mass, or LBM between those with PASC and without (p>0.05). Conclusion: During the pandemic, both COVID-19-survivors and COVID-negative groups exhibited increases in weight, and total and trunk fat, likely associated with pandemic-linked lifestyle modifications. However, only COVID-19-survivors had a decline in lean body mass over the same period, regardless of PASC symptoms.

There is evidence that kidney involvement is frequently observed in COVID-19 patients, and can manifest as mild proteinuria to advancing acute kidney injury (AKI). One of the mechanisms is microvascular and macrovascular thrombosis caused by the hypercoagulation phase of the disease. Thromboelastography (TEG) is a valuable examination to detect significant hemostatic abnormalities, including the hypercoagulable state. This study analyzed the coagulation profiles, including TEG parameters, in COVID-19 patients who developed AKI compared to those who did not during their intensive care unit (ICU) stay, to identify predictors of AKI. Our single-center cohort retrospective study involved adult patients of COVID-19 in the ICU of Sardjito Hospital in Yogyakarta, Indonesia between May and September 2021. Patients were divided into two groups of AKI and non-AKI based on 2012 KDIGO definition and the elaboration by Indonesian Society of Nephrology. Variables showing a significant difference in the two groups were then analyzed using univariate and multivariate binary logistic regression. A total of 60 COVID-19 patients were included in the study, and 35% of them developed AKI. Compared to non-AKI patients, those with AKI exhibited a greater prevalence of diabetes mellitus (66.7% versus 35.9%, P = 0.023), higher D-Dimer levels (970 versus 685 ng/mL, P = 0.045), and higher values in TEG parameters of maximum amplitude/MA (74.6 versus 65.9 mm, P = 0.001) and coagulation index/CI (2.3 versus 1.0, P = 0.033). TEG parameter of MA emerged as the sole significant predictor for the development of AKI (OR, 6.33; 95% CI, 1.56 to 25.64). Our study validated the kidney involvement of COVID-19 infection, and showed that diabetes mellitus, high D-Dimer levels, and hypercoagulability serve as prominent risk factors in the development of AKI. Furthermore, TEG parameter of MA exceeding 70 mm is the single independent significant predictor of AKI.

This study comprehensively evaluates the DNA/RNA Defend Pro (DRDP) sample collection buffer designed to inactivate and stabilize patient samples. The primary objectives encompassed assessing DRDP's efficacy in ensuring sample stability, facilitating extraction-free polymerase chain reaction (PCR), and ensuring compatibility with rapid antigen testing.Ninety-five diagnostic nasopharyngeal swab samples tested for influenza A/B, RSV A/B, and/or SARS-CoV-2 were diluted 1/10 with DRDP and anonymized. Stability testing involved incubating 31 positive samples at 4 °C, 20 °C, and 37 °C for 7 days, with regular extraction-free nucleic acid amplification testing (NAAT).Results demonstrated that DRDP guaranteed viral RNA stability at all temperatures for influenza, SARS-CoV-2 and RSV showing stability up to 7 days at 4 °C. DRDP-diluted samples exhibited robust compatibility with direct PCR, as 72 out of 88 samples positive for cobas Liat also tested positive for direct PCR. Non-concordant results could be explained by the 200-fold lower input in the extraction-free NAAT.Compared to NAAT, rapid antigen testing demonstrated lower sensitivity, as expected, while maintaining perfect specificity. Clear cutoffs between positive and negative rapid antigen testing results were observed in both cobas Liat and direct PCR analyses, validating DRDP's compatibility with these techniques. In conclusion, DRDP is an effective stabilizing medium compatible with direct PCR and rapid antigen testing and shows great potential for optimizing diagnostic processes, particularly in resource-limited or time-sensitive scenarios.

ABSTRACT Background: To date, the COVID-19 pandemic has been the foremost health concern for humankind in the new millennia. This paper aims to describe the related hospitalizations in Italy during the first two years of the health emergency. Design and methods: This is a retrospective, population-based study of Italian hospitalizations for patients diagnosed with COVID-19 during the 2020-2021 period, extracted from the National Hospital Discharge Registry. The outcome variables considered include hospital admissions, costs, and length of stay, among other hospitalization-level variables. Costs were estimated through the charges associated with the Diagnosis-Related Group and Major Diagnostic Categories coding system, plus an additional cost attributed to COVID-19 admissions. To these charges was added an extra cost defined by the ministry of health. Results: In Italy, there were 357,354 hospitalizations for COVID-19 attributed to 298,856 patients in 2020 and 399,043 hospitalizations for COVID-19 attributed to 333,447 patients in 2021. COVID-19 patients faced a transfer rate thrice that of other patients. Hospitalizations were concentrated predominantly in the northern regions, particularly in the first year. Hospitalization rates varied by age in a sine wave pattern, peaking in the youngest and oldest age groups, with mortality rates escalating with age— tending to remain below 3% for those under 44 but surging to 40% in individuals over 75. The financial impact of COVID-19 hospitalizations was substantial, with total costs reaching €3.97 billion in 2020 and €4.99 billion in 2021. Costs per admission and per day also rose, from €11,112 and €807 in 2020 to €12,503 and €844 in 2021, respectively. Excluding the added financial burden of COVID-19, costs would have been notably lower. Hospitalizations involving continuous invasive mechanical ventilation were particularly costly (about 24.000 euros x admission), reflecting the significant resources required for these treatments. Conclusion: Implementing a protective pad around the entire health system that leverages networks of family doctors and nurses, connected in real time to the entire health system, can be crucial. Such a network, tasked with monitoring the local epidemiological situation, protecting vulnerable individuals also through telehealth visits, and establishing a triage system for infections in the initial phase, may effectively help in managing virus spread and protecting hospitals from unpredictable waves of admission demand. Strengthening primary health care could be a decisive factor for the future and enhance the system's resilience in facing new challenges.

Background Community infections of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) have increased rapidly since the emergence of the Omicron strain. During the eighth and ninth pandemic waves—when movement restrictions in the community were eased—the all-case registration system was changed, and the actual status of infection became uncertain. Methods We conducted regular rapid antigen tests (R-RAT) once or twice a week to examine the actual state of coronavirus disease (COVID-19) diagnosis among healthcare employees. Results Overall, 320 (1.42/day) and 299 (1.76/day) employees were infected in the eighth and ninth pandemic waves. During both periods, 59/263 doctors (22.4%), 335/806 nurses (41.6%), 92/194 administrative employees (47.4%), and 129/218 clinical laboratory technicians (59.2%) were infected. In the eighth wave, 56 of 195 employees were infected through close contact; in the ninth wave, 26 of 62 employees were infected. No significant difference was observed in the number of vaccinations between infected and non-infected employees. The positivity rate of R-RAT was 0.41% and 0.45% in the eighth and ninth waves. R-RAT detected infection in 212 and 229 employees during the eighth and ninth waves, respectively; the ratio of R-RAT-detected positive employees to those who reported infection was significantly higher during the ninth wave (odds ratio: 1.67, 95% confidence interval: 1.17–2.37, p

This study explored differences in student-athletes’ symptoms of depression, anxiety, and stress pre- to post-COVID-19 pandemic. The WHO reported a 25% increase in depression and anxiety rates worldwide with young people disproportionately affected. Student-athletes face many stressors related to their sporting and academic feats but what is not known is how the COVID-19 pandemic affected their experiences of mental illness. A multiple cohort cross-sectional study design was employed, and data collected using physical and online surveys. Participants (M age = 19.98 years, SD = 1.50) were recruited from UK universities (N = 807; 427 pre-pandemic cohort, 380 post-pandemic cohort). Results revealed statistically significant differences in mean depression, anxiety, and stress scores between cohorts. Scores for the post-pandemic cohort were significantly higher than pre-pandemic, suggesting a worsening of symptom severity. Distributions of student-athletes across categories of symptom severity also worsened for depressive and anxiety symptoms post-pandemic and were skewed towards more severe categories. Symptoms of de-pression, anxiety, and stress were a concern pre-pandemic. Rates are higher in the post-pandemic cohort, suggesting a worsening of symptoms. This data adds to evidence on student-athletes’ symptoms of mental illness by exploring a UK sample and comparing scores pre- and post-pandemic.

More than 3 years have passed since the emergence of COVID-19. On May 8, 2023, COVID-19 in Japan was downgraded to Category 5 by the Infectious Disease Control Law. In Japan, at the beginning of the COVID-19 pandemic in 2020, cases of infection and deaths from severe disease were few compared with those of Western countries. However, in the medical field, screening for COVID-19 was given top priority, resulting in confusion and proving disadvantageous for many patients, also the overreaction to COVID-19 as the most important issue in society can be attributed largely to statements by infectious disease experts. In addition, the mRNA vaccine emerged in 2021, and most of the population was vaccinated up to two times within a short period of less than 1 year because infectious disease experts strongly promoted vaccination. After 2022, when vaccination progressed, and the Omicron strain, which is an attenuated strain, became the mainstay of the SARS-CoV-2, the number of severe cases of COVID-19 decreased significantly; however, the number of infected people increased dramatically instead. A significant portion of the population is thought to have hybrid immunity due to vaccination plus natural infection and maintains high antibody titers. Henceforth, additional vaccination should be given preferentially to those who will benefit most from it. Conversely, measures against COVID-19 caused serious damage to the economy and society. Policies that not only address countermeasures against infection, but also those that encompass the economy and society as a whole are necessary.

The question of what generates conscious experience has mesmerized thinkers since the dawn of humanity, yet its origins remain a mystery. The topic of consciousness has gained traction in recent years, thanks to the development of large language models that now arguably pass the Turing test, an operational test for intelligence. However, intelligence and consciousness are not related in obvious ways, as anyone who suffers from a bad toothache can attest - pain generates intense feelings and absorbs all our conscious awareness yet nothing particularly intelligent is going on. Still, in the hard sciences, this topic is frequently met with skepticism because to date no protocol to measure the content or intensity of conscious experiences in an observer-independent manner has been agreed upon. Here we present a novel proposal: Conscious experience arises whenever a quantum mechanical superposition forms. Our proposal has several implications: First, it suggests that the structure of the superposition determines the qualia of the experience. Second, quantum entanglement naturally solves the binding problem, ensuring the unity of phenomenal experience. Finally, a moment of agency may coincide with the formation of a superposition state. We outline a research program to experimentally test our conjecture via a sequence of quantum biology experiments. Applying these ideas opens up the possibility of expanding human experience through brain-quantum computer interfaces.

Despite the availability of COVID-19 vaccines, the global pandemic remains a significant health challenge. Timely detection of the virus is crucial for effective containment efforts, prompting the exploration of machine learning (ML) models for COVID-19 detection. highlights the ongoing significance of COVID-19 as a global health crisis despite the availability of vaccines. To address the need for timely virus detection, the study explores the efficacy of machine learning (ML) models, including DNN, Voting, Bagging, SVC_rbf, SVC_linear, SVC_polynomial, and SVC_sigmoid, in predicting COVID-19 infection probability. With a dataset comprising 4000 samples split into 3200 for training and 800 for testing, the analysis reveals that DNN and Voting models demonstrate the highest performance, achieving an impressive accuracy of 89%. These results underscore the potential of ML techniques, particularly DNN and ensemble methods like Voting, in facilitating early COVID-19 detection and contributing to effective pandemic management. The study emphasizes the importance of continued research to further refine and optimize ML-based COVID-19 detection systems.

A configurable design of a microstrip square spiral RFID tag antenna, for a wide range of microwave frequencies in S- and C-band, is presented. The design is parameterized in dimensions, and hence changing the design frequency (or frequencies) is easy, by changing only an initial value for the spiral geometry. A tag specimen was fabricated using Cu electroplating technique according to the design for frequencies of interest in the areas of 2.4 and 5.8 GHz. The substrate material is a 320 μm high resistivity Si and the bridge dielectric is a 15μm polyimide PI2525. The microfabrication process involves steps of metallic structure pattern transfer techniques with optical UV lithography procedures. The reflection coefficient and gain of the specimen were measured inside an anechoic enclosure using a vector network analyzer (VNA) and a TEM horn test antenna over a frequency range of up to 6 GHz. Simulated and measured results are presented and discussed, exhibiting reasonable agreement.

Coronavirus disease 2019 (COVID-19), the global pandemic caused by severe acute respiratory syndrome 2 virus (SARS-CoV-2) infection, has caused millions of infections and fatalities worldwide. Extensive SARS-CoV-2 research has been conducted to develop therapeutic drugs and prophylactic vaccines, and even though some drugs have been approved to treat SARS-CoV-2 infection, treatment efficacy remains limited. Therefore, preventive vaccination has been implemented on a global scale and represents the primary approach to combat the COVID-19 pandemic. Approved vaccines vary in composition, although vaccine design has been based on either the key viral structural (spike) protein or viral components carrying this protein. Therefore, mutations of the virus, particularly mutations in the S protein, severely compromise effectiveness of current vaccines and the ability to control COVID-19 infection. This review begins by describing the SARS-CoV-2 viral composition, mechanism of infection, role of angiotensin-converting enzyme 2, host defense responses against infection and the most common vaccine designs. Next, this review summarizes the common mutations of SARS-CoV-2 and how these mutations change viral properties, confer immune escape and influence vaccine efficacy. Finally, this review discusses global strategies that have been employed to mitigate the decreases in vaccine efficacy encountered against new variants.