Despite the growing capabilities of large language models, concerns exist about the biases they develop. In this paper, we propose a novel, automated mechanism for debiasing through specified dataset augmentation in the lens of bias producers that can be useful in a variety of industries, especially ones that are “restricted” and have limited data. We consider that bias can occur due to intrinsic model architecture and dataset quality. The two aspects are evaluated using two different metrics we created. We show that our dataset augmentation algorithm reduces bias as measured by our metrics.

Most existing coal-fired power plants were designed for sustained operation at full load to maximize efficiency, reliability, and revenue, as well as to operate air pollution control devices at design conditions. Depending on plant type and design, these plants can adjust output within a fixed range in response to the plant operating or market conditions. The need for flexibility driven by increased penetration of variable and non-dispatchable power generation such as wind and solar is shifting the traditional mission profile of thermoelectric power plants in three ways: more frequent shutdowns when market or grid conditions warrant, more aggressive load ramp rates (rate of output change), and lower minimum sustainable load, which provides a wider operating range and helps avoid costly plant shutdowns. Recent studies have shown that flexibility of a coal-fired power plant can be improved by energy storage. The objective of this work was to analyze a set of energy storage options and determine their impact on flexibility and economics of a representative coal-fired power plant. The effect of three energy storage systems integrated with a coal power plant on plant flexibility and economics was investigated. The results obtained in this project show that Energy Storage Systems integrated with a thermal power plant improves plant flexibility and participation in the Energy and Ancillary Services markets which improves plant financial performance. The study was funded by the U.S. Department Office of Fossil Energy FE-1 under Award Number DE-FE0031903.

With the disruption of digital technologies, customers have emerged as co-producers in order to reduce costs and enhance productivity. Customer-driven business logic recognizes customer capabilities and sustainable innovation as key factors in the performance of customized manufacturing enterprises. The potential relationship between customers and producers has become a new area of inquiry. Existing research rarely delves into the impact of customer predictive ability on the process of customized production activities, particularly in relation to sustainable innovation, which remains inadequately characterized. Ships serve as a typical representation of customized enterprises. This study explores the underlying drivers of sustainable innovation through customer demand orientation by examining 20-year historical patterns in the global shipping and shipbuilding markets, considering the environmental dependency and temporal correlation characteristics of the shipbuilding market (producers) and the shipping market (consumers). By employing time series and panel data in a machine learning algorithm, specifically the random forest model, the study reveals a strong and statistically significant correlation between new ship deliveries and the Baltic Dry Index (BDI), with larger value ships having a more pronounced impact on the consumer market. The correlation analysis confirms that these two variables, in combination, can comprehensively reflect customer predictive ability and serve as crucial decision criteria for customer investment in new ship production. Furthermore, based on principal component analysis of customer predictive ability and ship innovation levels, as well as Granger causality tests, the study demonstrates that customer predictive ability is a Granger cause of sustainable innovation in customized production. Customer predictive ability influences sustainable innovation in customized enterprises to varying degrees. This research provides valuable insights for shipbuilding companies in terms of engaging in sustainable innovation in international markets and understanding the value of international market customers.

RNA sequencing techniques, like bulk RNA-seq and Single Cell (sc) RNA-seq, are critical tools for the biologist looking to analyze the genetic activity/transcriptome of a tissue or cell during an experimental procedure. Platforms like Illumina's next-generation sequencing (NGS) are used to produce the raw data for this experimental procedure. This raw FASTQ data must then be prepared via a complex series of data manipulations by bioinformaticians. This process currently takes place on an unwieldy textual user interface like a terminal/command line that requires the user to install and import multiple program packages, preventing the untrained biologist from initiating data analysis. Open-source platforms like Galaxy have produced a more user-friendly pipeline, yet the visual interface remains cluttered and highly technical, remaining uninviting for the natural scientist. To address this, SeqMate is a user-friendly tool that allows for one-click analytics by utilizing the power of a large language model (LLM) to automate both data preparation and analysis (differential expression, trajectory analysis, etc). Furthermore, by utilizing the power of generative AI, SeqMate is also capable of analyzing such findings and producing written reports of upregulated/downregulated/user-prompted genes with sources cited from known repositories like PubMed, PDB, and Uniprot.

In recent decades, the aquaculture industry has experienced significant growth worldwide, surpassing other food production sectors. This review aims to explore the dynamics of aquafeed production, particularly the shift from conventional to local feed production in Africa, driven by cost-effectiveness and the availability of raw materials. The review examines various scientific publications on aquafeed, focusing on both conventional and novel feed formulations and their impact on aquaculture and the environment. Commonly used aquafeed ingredients among African farmers include cassava, maize gluten, groundnut oilcake, sunflower oilcake, soybean meal, kale, peas, garlic, shrimp wastes, and waste blood. Novel ingredients such as insect-based diets and micro-algae formulations are also explored. Aquafeed composition impacts aqua-waste, water quality, algae, oxygen demand, fish mortality, and eutrophication. The findings highlight the need to reorient feed formulation methods and ingredients to achieve a circular economy in Africa, promoting increased fish production at minimal costs, creating employment while supporting climate adaptation and mitigation efforts. Ultimately, the aquafeed sector has the potential to grow sustainably through the adoption of feed alternatives that prioritise sustainable production and encourage beneficiation studies.

With prosperous development and successful application of deep learning technologies in the field of remote sensing, numerous deep-learning based methods have emerged for synthetic aperture radar (SAR) automatic target recognition (ATR) tasks over the past few years. Generally, most deep-learning based methods can achieve outstanding recognition performance in condition that an abundant of labeled samples are available to train the model. However, in real application scenarios, it is difficult and costly to acquire and to annotate abundant SAR images due to the imaging mechanism of SAR, which poses a big challenge to existing SAR ATR methods. Thereby, SAR target recognition under the situation of few-shot, where only a scarcely few of labeled samples are available, is a fundamental problem that needs to be solved. In this paper, we put forward a new method named enhanced prototypical network with customized region-aware convolution (CRCEPN) to specially tackle the few-shot SAR ATR tasks. To be specific, We first develop a feature extraction network based on a customized and region-aware convolution, which can adaptively adjust convolutional kernels and their receptive fields according to each SAR image’s own characteristics as well as the semantical similarity among spatial regions, thus augmenting its capability to extract more informative and discriminative features. To achieve accurate and robust target identity prediction under the few-shot condition, we then propose an enhanced prototypical network which can improve the representation ability of the class prototype by properly making use of training and test samples together, thus effectively raising the classification accuracy. Meanwhile, a new hybrid loss is designed to learn a feature space with both inter-class separability and intra-class tightness as much as possible, which can further upgrade the recognition performance of the proposed method. Experiments performed on the moving and stationary target acquisition and recognition (MSTAR) dataset and the OpenSARShip dataset demonstrate that the proposed method is competitive with some state-of-the-art methods for few-shot SAR ATR tasks.

The process of developing therapies to treat rare diseases is fraught with financial, regulatory, and logistical challenges that have limited our ability to build effective treatments. Recently, a novel type of therapy called antisense therapy has shown immense potential for the treatment of rare diseases, particularly through single-patient N-of-1 trials. Several N-of-1 antisense therapies have been developed recently for rare diseases, including the landmark study of milasen. In response to the success of N-of-1 antisense therapy, the Food and Drug Administration (FDA) has developed unique guidelines specifically for the development of antisense therapy to treat N-of-1 rare diseases. This policy change establishes a strong foundation for future therapy development, and addresses some of the major limitations that previously hindered the development of therapies for rare diseases.

Grand challenges represent wicked problems that affect many people globally. To overcome grand challenges and sustain our existence as human beings, issues have become increasingly central, and in recent years have led to an increase in research and literature on grand challenges affecting both international business areas and multinational enterprises. The aim of this study is to assess the status of literature in all areas connected to multinational corporations and grand challenges, which are global issues with significant implications. From 2013 to 2023, the WoS database was used to investigate eight search terms from literature, and bibliometric and thematic analyses were carried out based on the principles of systematic literature analysis. The most focused areas of the research are performance, multinational enterprises, foreign direct investment, management, firms’ innovation, knowledge, international business, and impact. Asian, African, European, and other countries may emerge together in different clusters depending on whether the major challenges they are struggling with are similar or identical. the terms of grand challenges and innovation (open and social), technology transfer, R&D internalization, digital transformation or technology and artificial intelligence in the literature of multinational enterprises indicates that these themes are used as a tool to solve grand challenges.

The digital transformation of the global economy presents new challenges and opportunities for businesses and nations. With the growing role of digital technologies and the dynamic changes in the structure of the economy, there is a need for a better understanding of the processes shaping contemporary enterprises. This article analyzes the impact of digital transformation on businesses and the global economy, identifying key areas where these changes are most evident. As part of this discussion, a modification of the “9 Pillars of Industry 4.0” concept is proposed, incorporating solutions that have emerged since its inception. The resulting model, “11 Pillars of Industry 4.0,” enabled the analysis of the “born digital” and “born global” concepts, highlighting their numerous common features in the context of the digital transformation of economies. This became the basis for proposing a new concept: “born digibal” — enterprises that from the outset operate in multiple markets, with their main sphere of activity based on digital solutions.The conclusions of the article provide an assessment of the changes occurring in businesses and the global economy in the digital age. They suggest that the dynamics of globalization in the 21st century will be shaped by complex interactions between digital transformation and the actions of businesses and nations, requiring flexibility and innovation in adapting to new economic realities.

The digital revolution has significantly impacted many Chinese Time-Honored businesses, particularly those slow to adapt to environmental changes, resulting in challenges related to long-term marketing capabilities and declining performance. This study explores the relationship between ambidextrous marketing capabilities and corporate performance. Utilizing a survey involving 91.8% of middle and upper-level managers across 47 Chinese time-honored firms, we construct a research model that demonstrates how the application of ambidextrous marketing capabilities can foster the development of Sustainable marketing capability, which in turn positively influence corporate performance. Sustainable marketing capability mediate the effect of ambidextrous marketing capabilities on corporate performance. Additionally, enhancements in market conditions or legislation may further amplify the impact of Sustainable marketing capability on business performance. In the context of Chinese time-honored firms, these findings offer managerial insights into building Sustainable marketing capability, enhancing performance, and achieving competitive advantages.

This study aimed to develop a state-of-the-art method for assessing chemical risks. The method combined desk research findings and the authors' practical knowledge to identify the major shortcomings in performing risk assessments at the workplace. Data were collected from nine SMEs across three sectors: agriculture, laboratory research, and conservation and restoration laboratories. The results of the discussions with the workers and on-site observations were used to develop the method to assess chemical risks. The method uses numerical factors to account for the level of conformity and the duration of exposure to support an estimation of the probability of an incident. The developed method was designed to enhance risk assessment practices and tackle common issues encountered by enterprises, including SMEs.

Small and Medium Enterprises (SMEs) are recognized as the main drivers of economic growth and development in many countries throughout the world. SMEs represent about 90% of the manufacturing sector and contribute about 14% of the total manufacturing contribution to GDP. Despite SMEs’ potential to change Nigeria’s status from a consumer economy to a production economy, policies that will ensure that environmentally- friendly manufacturing processes and production technology are not implemented or complied with. SMEs’ operational activities may be deleterious to human health and the ecosystem if environmental management practices are not adopted or prioritized. This paper evaluated the perception and adoption of the Environmental Management System, mainly ISO 14001, by SMEs in Nigeria. One hundred and fifty (150) SMEs in the manufacturing sector in Lagos and Ogun State, Southwestern Nigeria, were randomly selected for this study. The paper posits that environmental management literacy and advocacy should be carried out in SMEs. Environmental management practices involve engaging both industries and product end-users in sustainable practices. The paper concludes that the implementation of environmental management practices and culture by SMEs will abate environmental pollution and its concomitant health risks to humans, the environment, flora, and fauna. Mandatory and voluntary environmental measures are suggested as a means of engendering eco-friendly innovation for sustainable development, triggering employment, job security, and gross domestic product.

The article presents a model for optimizing biomass supply chains using the linear programming framework integrated with a Geographic Information System. Based on the distance from a given type of biomass resource, its calorific value, price, and transportation costs, the model identifies the optimal source of biomass, allowing it to cover the demand for the required total energy value with the lowest possible costs. The case study includes the Połaniec power plant in southeastern Poland and potential sources of forest biomass and agricultural straw within 100 km of the plant. Unit costs of biomass varied depending on biomass availability and energy demands. For energy demand on the level of 1 PJ yearly, the lowest unit costs of biomass (4.08 €/MJ) were when all kinds of biomass were available, and the highest (5.47 €/MJ) was when only stacked wood was available. As energy demand increased, unit costs increased, and the ability to meet this demand with just one type of biomass decreased. The energy biomass sector can utilize the model to benefit both biomass producers and their final buyers.

Energy transition is one of the greatest challenges facing humanity today. All micro, small, medium and large enterprises in operation will have to face it, and some can al-ready boast the first successes in this regard. This paper focuses on the involvement of these smallest players in energy transition. Micro and small entities are the largest part of the economy, having a great influence on its development. Looking at the wide scale of their activities, these entities are distinguished by a specific owner-manager relationship. This means that the final decision-making is influenced by business goals, but also by the manager's approach, their awareness of changes, and personal and other factors. Based on a structured and standardized survey questionnaire, the research was carried out using the Computer-Assisted Telephone Interviewing technique between April and May 2022 among owners of micro and small enterprises operating in Poland. The survey showed that active engagement of micro and small enterprises in energy efficiency initiatives is related to their market success and financial health.

High-Level Synthesis (HLS) tools have revolutionized FPGA application development by providing a more efficient and streamlined approach, significantly impacting digital design methodologies. Despite the capability of FPGAs to customize numerical representations in data paths, most HLS projects have focused on fixed-point precision, while floating-point representations remain limited to vendor-provided single, double, and half-precision formats. This paper proposes a customized floating-point library compatible with HLS to address these limitations. This library allows programmers to define the number of exponent and mantissa bits at compile time, providing greater flexibility and enabling the use of mixed precision. Moreover, this library includes optimized implementations of common components such as vector summation (VSUM), dot-product (DP), and matrix-vector multiplication (MVM). Results demonstrate that the proposed library reduces latency and resource utilization compared to vendor IP blocks, particularly in VSUM, DP, and MVM operations. For example, the MVM operation involving a 32x32 matrix, using vendor IP requires 22 clock cycles, whereas CuFP completes the same task in just 7 clock cycles, using approximately 60% fewer DSPs, 10% fewer LUTs, and 60% fewer FFs.

Power consumption prediction is a crucial component in enhancing the efficiency and sustainability of building operations. This study investigates the impact of data collection frequency and model selection on the predictive accuracy of power consumption in two distinct building types: an Academic one with 15-minute interval data and an Industrial one with hourly data. Various machine learning models, including Support Vector Machine (SVM) with Radial and Sigmoid kernels, Random Forest (RF), and Deep Neural Networks (DNN), across different data splits and feature sets. Our analysis reveals that higher data collection frequency generally improves model performance, as indicated by lower RMSE, MAPE, and CV values, alongside higher R² scores. The inclusion of more historical power consumption features has also been found to have a more significant impact on the accuracy of predictions than including climate condition features. Moreover, the SVM-Radial model consistently outperformed others, particularly in capturing complex, non-linear patterns in the data. However, the DNN model, while competent in some metrics, showed elevated MAPE values, suggesting potential overfitting issues. These findings suggest that careful consideration of data frequency, features and model selection is essential for optimizing power prediction, contributing to more efficient power management strategies in building operations.

Existing implants used with Total Knee Arthroplasty (TKA), Total Hip Arthroplasty (THA), and other joint reconstruction treatments, have displayed premature failures and frequent needs for revision surgery in recent years, particularly with young active patients who represent more than 55% of all joint reconstruction patients. Bone cement and stress shielding have been identified as the major reasons for premature joint failures. A breakdown of the cement may happen, and revision surgery may be needed because of the aseptic loosening. The significant mismatch of stiffness properties of patient trabecular bones and metallic implant materials in joint reconstruction surgery results in the stress shielding phenomenon. This could lead to significant bone resorption and increased risk of bone fracture and the aseptic loosening of implants. The present project introduces an approach for development of customized cellular structures to match the mechanical properties and architecture of human trabecular bone. It consists of four modules:1- characterization of geometry, microarchitecture, and stiffness properties of patient’s bones; 2- developing customized lattice structures tailored to mimic properties established in module 1; 3 - integration of developed lattice structure into full scale implant design and manufacturing; 4- implementation of the developed technology for use in implants that would overcome most of the issues related to aseptic loosening phenomenon. The present work aims at fulfilling the objectives of module 2 by exploring new designs of customized lattice structures and texture tailored to mimic closely patients’ bone anisotropic properties and that can incorporate an engineered biological press-fit fixation technique. The effects of various lattice design variables on mechanical performance of the structure are examined through systematic experimental plan using statistical design of experiments technique and analysis of variance method. All tested lattice designs were explored under realistic geometrical, biological, and manufacturing constraints. Of the four design factors examined in this study, strut thickness was found to have the highest percent contribution (41%) regarding the structure stiffness, followed by unit cell type, and cell size. Srut shape was found to have the lowest effect with only 11% contribution. The introduced solution offers lattice structure designs that can be adjusted to match bone stiffness distribution and promote bone ingrowth and hence eliminating the phenomenon of stress shielding while incorporating biological press-fit fixation technique.

The determinants of enterprises providing ICT training in Europe are analyzed in this article. Data are collected from the European Innovation Scoreboard-EIS of the European Commission for 36 European countries in the period 2000-2019. Data are analyzed with Panel Data with Fixed Effects, Panel Data with Random Effects, Dynamic Panel, WLS and Pooled OLS. Results show that the number of enterprises providing ICT training in Europe is positively associate with “Innovation Index”, “Innovators”, “New Doctorate Graduates”, “Tertiary Education” and negatively associated with “Government Procurement of Advanced Technology Products”, “Human Resources”, and “Marketing or Organisational Innovators”. In adjunct a cluster analysis is performed by using k-Means algorithm optimized with the Silhouette Coefficient and we find the presence of four clusters. Finally, we use eight different machine learning algorithms to predict the value of the enterprises providing ICT training in Europe. We found that the Simple Tree Regression is the best predictor and that the number of enterprises providing ICT training in Europe is expected to growth of the 5,02%.

The Industrial Revolution 4.0 (IR4.0) is transforming the global economy, necessitating mall and medium-sized enterprises (SMEs) to adopt new technologies like artificial intelligence (AI), the Internet of Things (IoT), blockchain, and cloud computing. Therefore, SMEs need to assess their readiness to identify capabilities and areas for improvement to remain competitive. However, existing IR4.0 readiness assessment such as the Industry4WRD Readiness Assessment and Industry 4.0-Readiness by IMPULS German are time-consuming and restrict the participation of various sectors. Using the understanding of theories such as Technology Acceptance Model (TAM), Unified Theory of Acceptance and Use of Technology (UTAUT), Technology Readiness Index (TRI), and Diffusion Of Innovation (DOI), this study developed an initial research model that identifies the dimensions of IR4.0 readiness; (i) organization, (ii) data, (iii) infrastructure, (iv) analytics, and (v) IT, development and operations. This study carried out qualitative methods through four different phases. The first phase is a systematic literature review, and data collection through participant observation (PO) in IR4.0 skills training programs, seminars, and workshops. The second phase is the development of an initial research model to identify the dimensions of IR4.0 readiness that will be used in the next phase. The third phase is a survey on SME’s IR4.0 readiness via the IR4.0 e-Readiness Checker (IR4.0 eRC) readiness assessment system, which produces the final research model, IR4.0 SME Readiness Model. In the fourth phase, the IR4.0 Readiness Model is confirmed for use by SMEs in Malaysia through interviews with three industry experts in Malaysia. Based on the 50 responses in the IR4.0 eRC evaluation, the average IR4.0 readiness of SMEs is 66%, and only 10 SMEs with less than 50%, showing room and improvement opportunities for the continuous research and development of IR4.0 transformation. This study developed IR4.0 readiness model for SMEs to assess readiness for IR4.0 transformation, support investments in IoT projects and employee upskilling programs.

When a limb suffers a fracture, rupture, or dislocation, it is traditionally immobilized with plaster. This may induce discomfort in the patient, excessive itching and sweating, which creates the growth of bacteria, leading to an unhygienic and difficulty to keep clean from treatment. Furthermore, if the plaster remains for a long period, it may cause lesions in the joints and ligaments. To overcome all these disadvantages, orthoses have emerged as important medical devices to help patients in rehabilitation, as well as for self-care of deficiencies in clinics and daily life. Traditionally, these devices are produced manually, which becomes time-consuming and error prone. From another point-of-view, it is possible to use imageology (X-ray or computed tomography) to scan the human body; a process that may help orthoses manufacturing but induces radiation to the patient. To overcome this great disadvantage, several types of 3D scanners, without any kind of radiation have emerged. This article describes the use of various types of scanners capable of digitizing the human body, to produce custom orthoses. Studies have shown that photogrammetry is the most used and most suitable 3D scanner for the acquisition of the human body in 3D. With this evolution of technology, it is possible to decrease the scanning time and it will be possible to introduce this technology in clinical environment.

Tinnitus is a heterogeneous auditory disorder without a pharmacological cure but with several palliative treatments. One of the most applied treatments for tinnitus relief combines counselling with sound therapy. The efficiency of this sound therapy depends on the type of sound stimulus and the exposition time. The fundamentals of a customized sound therapy that stimulates the auditory system with a continuous or sequential sound which compensates for the subject hearing loss are described here. A sample of 137 tinnitus subjects are treated with this sound therapy, named Enriched Acoustic Environment. 90% of these patients achieved a clinically relevant and statistically significant tinnitus-related distress relief quantified as a mean drop of their Tinnitus Handicap Inventory score of 24.3 points. These subjects exposed with sequential stimuli (31%) achieved greater distress relief (5.1 points more in their Tinnitus Handicap Inventory score) than those stimulated with continuous sound (69%). Therefore, this sound constitutes an optimized stimulus for tinnitus treatment.

This case study examined performance of rural cassava SMEs managed by small scale farmers in Busia and Kisumu Counties in the lake region of Kenya. Formal survey, focus group discussions and key informant interviews were used to collect data from farmers and stakeholders in the region. The data were analysed descriptively using proportions (percentages and proportions), means and standard deviation and inferentially, using statistical tests of significance. The findings revealed gross inefficiencies in the management of cassava SMEs. Grass-root SMEs lack professional managers and exhibit inadequate organizational, quantity and quality management, high operational costs, lack of trust from farmers, inadequate financing, weak technical, agribusiness skills and weak linkages with markets. The findings challenge promotion of farmer-led organizations in rural areas to perform additional roles such as processing and marketing functions beyond their core business which is production. To remain relevant in a competitive value chain, grass-root farmer-led SMEs need to be re structured into viable economic entities with clear market-orientation. Ordinary smallholder farmers should specialize in producing sufficient quantity and quality of agricultural commodities, while processing and marketing functions are taken up by professional entrepreneurs. This study recommends an entrepreneur model rather than farmer-led SMEs as potentially best suited in creating efficiency in the cassava value chain in the lake region of Kenya.

To improve accessibility, this article describes a static, four-legged, walker that can be constructed from materials and fasteners commonly available from hardware stores coupled by open-source 3-D printed joints. The designs are described in detail, shared under an open-source license, and fabricated with a low-cost open-source desktop 3-D printer and hand tools. The resulting device is loaded to failure to determine the maximum load that the design can safely support in both vertical and horizontal failure modes. The experimental results showed the average vertical failure load capacity was 3680±694.3N, equivalent to 375.3±70.8kg of applied weight with the fractured location at the wood dowel handlebars. The average horizontal load capacity was 315.6±49.4N, equivalent to 32.2±5.1kg. The maximum weight capacity of a user of 187.1±29.3kg was obtained, which indicates the open-source walker design can withstand the weight requirements of all genders with a 95% confidence interval that includes a safety factor of 1.8 when considering the lowest deviation weight capacity. The design has a cost at the bottom of the range of commercial walkers and reduces the mass compared to a commercial walker by 0.5kg (19% reduction). It can be concluded that this open-source walker design can aid accessibility in low-resource settings.

Background: In high-risk breast cancer patients with skin infiltration the administration of a uniform dose to superficial tissues is fundamental in order to reduce local skin relapse. A personalized bolus may prevent the potential standard bolus’ inadequate dose distribution due to air gaps between the bolus and the skin. In this pilot study, we introduced in clinical practice the use of a personalized 3D printed bolus filled with ultrasound transmission gel. Methods: Seven patients undergoing radiotherapy after mastectomy were selected. 3D printed bolus dosimetric assessment was performed with MOSFET dosimeters on an anthropomorphic phantom and subsequently on three selected cases with increasing bolus shape irregularity. Acute/late toxicity and local control was assessed. Results: Overall, for the clinical cases the percentage median difference between measured and calculated doses was -2.7% (-7.0%÷4.9%). Median follow-up was 21 months. After two years, one patient showed G2 pain, one patient manifested G1 telangiectasia, one patient showed G1 hyperpigmentation, and two patients had no relevant toxicity. Conclusions: Personalized 3D-printed bolus filled with ultrasound gel may easily reproduce the standard bolus’ consistency providing an accurate coverage of the target area with tolerable acute/late toxicity grades. This is a pilot study and further investigations are needed.

World Economy today depends on business investments that are propelled by Green technology, innovations and entrepreneurial activities. In recent years, developing economies in Asia, Africa and Latin America have embarked on easy capital access to Small Medium Enterprises (SMEs) to facilitate their economic growth. Kenya is among the Middle Level Income Countries that have gained global recognition through entrepreneurial innovations. In this study we assess the role of entrepreneurship towards poverty alleviation in Kenya. The objectives of the study were: to evaluate the role of entrepreneurship in poverty alleviation in Kenya; to identify entrepreneurship innovations and their economic contribution in Kenya and to determine the significance of entrepreneurship to Kenyan economy. Methodology of study took a parametric approach through pure desktop studies on entrepreneurship cases in Kenya. Success case studies of entrepreneurial innovations like M-pesa, M-soko and Uwezo Fund initiatives were assessed. The paper notes that activities undertaken in each of these case studies have made great contributions to poverty alleviation and economic development in both urban and rural areas of Kenya.

Ondol, a heating system unique to Korean homes, raises indoor temperatures by supplying hot water through pipes embedded in the floor slab. Known for its comfort and sustained heat advantages, Ondol has garnered international interest in countries requiring efficient heating solutions. Given the inherent challenges during installation and operation, timely inspection is crucial due to difficulties in detecting and pinpointing defects in the buried concrete pipes, often leading to costly rework and removal. Yet, specialized inspection systems tailored for Ondol pipes remain underexplored. Therefore, this study proposes a robotic inspection system capable of assessing the condition of Ondol pipelines. We analyzed the characteristics of Ondol piping to establish the system requirements and developed a prototype of a compact capsule-shaped inspection robot tailored for Ondol pipe inspection. Subsequent laboratory testing validated its performance and usability, confirming its capability for field application through tests on curvature maneuverability and image reception quality. This research aims to motivate advancements in Ondol-specific system implementation and performance validation, potentially contributing to the smartification of Ondol maintenance practices.

As the number of Small and Medium Enterprises (SMEs) rises in the world, the amount of sensitive data used also increases, making them targets for cyberattacks. SMEs face a host of issues such as lack of resources, and poor cybersecurity talent, resulting in multiple vulnerabilities that increase overall risk. Cybersecurity risk assessment frameworks have been developed by multiple organizations such as the National Institute of Science and Technology (NIST) and the International Organization for Standardization (ISO), but they are complicated to understand, and challenging to implement. This research aimed to create an effective cybersecurity risk assessment framework specifically for SMEs while considering their limitations. This was achieved by first identifying common threats and vulnerabilities and categorizing them according to their importance, and risk. Secondly, popular frameworks like the NIST CSF and ISO 27001/2 were analyzed for their proficiencies and deficiencies while identifying relevant areas for SMEs. Finally, novel techniques catered to SMEs were explored and incorporated to create an effective framework for SMEs. This framework was also developed in the form of a tool, providing an interactive and dynamic environment. The tool was effective and the framework is a promising start but requires more quantitative analysis.

Export participation and restricted access to external formal credit are two factors attracting meticulous attention from researchers and policymakers, especially in developing countries. Exploring the interactive relationship of these factors in both the static and dynamic models is the purpose of this study. The study uses data sets from small and medium-sized manufacturing enterprises (SMEs) in Vietnam for the period 2009 - 2015. The instrumental variable approach is implemented to deal with the endogenous variable problem in the model. The results show an effect of credit constraint on the firms’ exporting status, and continuous exports are likely to reduce the limit of credit constraint.

In the paper, the author takes stock of the conceptual reflection and empirical studies described in the current scientific literature on responsible innovation in the context of the emergence of Responsible Research and Innovation (RRI) concept. RRI has been promoted in the European Union as a part of the Europe 2020 strategy with the objective of making research and innovation more sustainable and inclusive. As more than half of the EU’s firms declare conducting innovation activities RRI problematic becomes more relevant than ever. There remain many open questions, unresolved dilemmas and empirical white spots that call for more research in this field. This paper’s main focus is the problem of RRI acceptance as a global framework for responsible innovation and the scarcity of suitable instruments that may help industry understand and adopt this concept. The main contribution of this paper are: the critical analysis of the RRI concept and its implications for industry, proposing a concept of RRI index for innovating enterprises.

Under the background that the international technological innovation environment VUCA has been intensifying and the innovation situation of Chinese manufacturing enterprises has been impacted, the innovation dilemma faced by enterprises has attracted increasing attention, while the innovation dilemma is also one of the important factors affecting the operation efficiency of enterprises. Based on the micro-data of China’s A-share manufacturing listed enterprises, this paper empirically analyzes the impact of innovation dilemmas faced by enterprises on operational efficiency (innovation dilemmas are measured by the difference when actual innovation performance is lower than expected innovation performance). The results show that the innovation dilemma of manufacturing enterprises significantly inhibits the operational efficiency of manufacturing enterprises by reducing their risk tolerance, development ability expectation and profitability. After using a series of tests, such as instrumental variable method, propensity score matching method, DID (Differences-in-Differences) and changing variable measure method, the conclusion is still robust. In addition, the inhibitory effect of innovation dilemma on enterprise operation efficiency is more obvious for private enterprises, small and medium-sized enterprises, enterprises in the ascend or decline phase, high-tech enterprises and enterprises in the eastern region. Therefore, the government should strengthen the policy support for the manufacturing enterprises in the innovation dilemma, help the enterprises to overcome the innovation bottleneck. Manufacturing enterprises themselves should enhance their innovation capabilities and strive to get rid of the innovation dilemma in order to maintain a stable footing in the fierce market competition and improve the high-quality development of China’s manufacturing industry.

Promoting close and sustainable cooperation between schools, enterprises, and government has become an important concern in many countries. Based on evolutionary game theory, this paper constructs a tripartite evolutionary game model of schools, enterprises, and government in order to analyze the stability of strategies of the different players. The results show that the main factor that influences the stability of the strategies of schools and enterprises is the reward of positive cooperation from sources other than the government, and the main factor that influences the stability of the strategy of the government is the benefit of positive cooperation strategy under the scenario where schools cooperate with enterprises. Therefore, the government should focus on implementing more effective policies, such as increasing the incentives and penalties, improving the mechanism for managing conflicts, ensuring the fairness of benefits distribution, and clarifying the responsibilities of different departments; schools should focus on providing more practical curricula and programs for students, training high-quality teachers, and perfecting talent cultivation to meet the needs of enterprises; and enterprises should focus on providing job experiences for students and transforming the results of schools’ teaching and theoretical research into practical productivity.

The sustainable development of mines has been the focus of attention in recent years, in China, there are a large number of untreated mined-out areas, and a series of disasters caused by instability of the goaf will bring heavy blows to people’s safety and financial resources. Mined-out areas management is an important part that cannot be ignored in mine sustainable development, and filling management is one of the most effective ways to solve the hidden danger of mined-out areas. Among them, cemented filling with tailings and the ultra-high-water backfilling are commonly used in mining enterprises. However, filling treatment will lead to increasing cost and the decreasing profits, which seriously depresses the motivation of mining enterprises and even leads to mor-al hazard. Therefore, the analysis of the economic benefits of goaf control plays a vital role in the sustainable construction and long-term development of mines. This paper proposed the mine-out area treatment economic model, the proposed method employs the guiding philosophy of news-boy model to create a mathematical economy model that provides the basis of goaf management mode for mine. The following research results are achieved: (1) The economic model of mined-out area backfilling treatment is constructed, and which is classified three different modes. (2) Com-bined with mathematical derivation and simulation, the influence of relevant variable parameters on each type of filling mode is discussed. (3) Various types of goaf filling treatment mode are com-pared with non-filling scheme (benchmark mode), so as to provide theoretical support for mining enterprises to choose the appropriate filling scheme. The results shows that the economic model of mined-out area management provides the optimal mode for mined-out area filling, the balance of tailings and ultra-high water filling materials procurement is realized, to making maximum profits. In this paper, the use of economic thinking has an important impact on the sustainable development of safety goaf management. To evaluate the sustainable development of goaf management by building economic models. It has important theoretical basis and practical guiding significance for the development and exploration of mined-out area management by combining economy with sustainable development.

Using LSMS-ISA panel data, we analyzed determinants of diversification into Rural Non-Farm Enterprises (RNFEs) and dynamics of the sector by studying the transition between farming and both low- and high-return RNFEs. We found that diversification into RNFE is determined by household characteristics mainly age and gender of the household head, whereas initial capital endowments such as assets, human capital, land and livestock significantly affect level of participation than entry into RNFE. Furthermore, analysing dynamics of RNFE separately for the youth and matured households, our study finds that continuous participation in RNFE is higher among the youth than among matured households. Similarly, initial capital endowments mainly educational level and access to credit are important factors for the youth to transit to high return RNFE, implying that entrepreneurial skills development and access to finance that enhance investments and gradual accumulation of capital are vital for the youth to benefit from RNFEs. Moreover, shocks that affect agricultural productivity are significant in increasing the probability of transition out of high-return RNFE signifying the need for social protection measures to ensure growth of RNFEs.

Aim: The aim of the paper is to assess the usefulness of sectoral means in financial analyses of enterprises. Research methods: The article uses an inductive-deductive approach to assess the suitability of sectoral means used in analyses of financial standings of enterprises. The method of analysis and logical construction was used for literature review. The methods of descriptive statistics such as, arithmetic means, standard deviation and coefficient of variation were used in order to analyze the data and draw conclusions based on the results. Contribution: The assessment of the usefulness of sectoral means in the context of their variability seems to be a crucial aspect for the analysis of a company’s financial situation. When assessing the financial standing of an enterprise, it is necessary to use a comparative analysis method, based on, inter alia, a comparison in space. This type of comparison requires the use of sectoral means, whose assessment is extremely important to drawing reliable and correct conclusions of the financial situation of a company.

The incorporation of nanomaterials on (bio)sensors based on composite materials has led to important advances in analytical chemistry field due to the extraordinary properties that these materials offer. Nanodiamonds (NDs) are a novel type of material that has raised much attention, as they have the possibility of being produced on large scale by using relatively inexpensive synthetic methodologies. Moreover, NDs present some other interesting features as suitability for fluorescence due to surface functionalization and a proved biocompatibility, which makes them well suited for biomedical applications. In addition, NDs can be modified with metallic nanoparticles (NP), such as silver or gold, in order to combine the special features of both. The aim of this research work is the nanostructuration of novel sensing devices using NDs combined with silver (Ag@NDs) and gold (Au@NDs) nanoparticles. A complete morphological and electrochemical characterization as function of the prepared nanocomposite composition have been performed in order to improve the electroanalytical properties of the developed (bio)sensors.

The contemporary discourse focuses on the fourth industrial revolution and its impact on compa-nies. An explicative, quantitative, questionnaire survey was conducted with managers of 101 companies in Hungary and 54 in Austria. Our study focused on assessing their preparedness for Industry 4.0 and the key factors they take into account when implementing Industry 4.0 initiatives. We also examined whether there is a correlation between the areas in which companies have made improvements to support Industry 4.0. To complement our quantitative analysis, we conducted a series of four semi-structured interviews with two Hungarian and two Austrian companies. The aim of the interviews was to further investigate the digital readiness of companies and to formulate recommendations for companies venturing into the field of digitalisation. A particular focus was put on comparing the digital maturity of these two neighbouring Central European countries, given the significant differences in their digital maturity as shown by the macro indicators of the Digital Economy and Society Index (DESI). Therefore, we conducted a micro-level analysis to investigate the extent to which DESI scores correspond to the digital performance of companies at the orga-nisational level.

This research investigates the economic resilience of small and medium enterprises (SMEs) during financial crises, focusing on the factors that enable these businesses to survive and recover from economic downturns. Employing a qualitative methodology, the study examines various aspects of SME operations, including financial management, innovation, leadership, government support, geographical location, social capital, and contingency planning. The findings reveal that effective financial management—encompassing cash flow management, debt restructuring, and diversified funding sources—is crucial for maintaining stability during financial crises. Innovation and adaptability also play significant roles, with SMEs that embraced new technologies and market strategies demonstrating greater resilience. Leadership emerged as a critical factor, with leaders who communicated effectively and managed stress contributing to their organization's ability to navigate crises. Government support provided essential relief, although its impact varied depending on accessibility and timeliness. Geographical location influenced resilience, with urban SMEs having better access to resources, while rural SMEs benefited from strong community networks. Social capital, including relationships with suppliers and customers, was vital for providing stability and support. Contingency planning and risk management were identified as essential for preparing for and responding to disruptions. The research highlights that resilience is a multifaceted attribute resulting from the interplay of financial prudence, adaptability, effective leadership, supportive policies, geographic factors, and strong social networks. These insights offer valuable lessons for SME owners, policymakers, and support organizations, emphasizing the need for a comprehensive approach to building and sustaining resilience in the face of economic challenges.

This study investigated the roles of transactions cost in MSMEs access to finance. This was done by investigating the impact of transactions cost on access to credit from both MSMEs and financial institutions (commercial banks and microfinance banks). From the MSMEs’ side, borrowing experience, decision lag, firm size and borrowers’ distance to the loan office were investigated. On the financial institution’s side, the costs of information gathering, loan administration, monitoring and loan enforcement were investigated. We used the questionnaire survey method, in-depth interviews and case studies, as well as the annual financial statements of the banks. We identified interest rate and collateral value as constraints to access to finance for MSMEs. We also found financial institutions’ attitude to MSMEs access to credit was not friendly. Financial institutions need to do more to bring down transaction cost of lending. This hopefully can be achieved by investing more in agent banking which would lower operating costs, as well as spreading risk, and ultimately increase credit intermediation to small businesses.

Internet-led labour market has become so competitive forcing many organisations from different sectors to embrace e-recruitment. However, realising the value of the e-recruitment from a Requirements Engineering (RE) analysis perspective is challenging. This research is motivated by the results of a failed e-recruitment project conducted in military domain which is used as a case study in this research. After reviewing the various challenges faced in that project through a number of related research domains, this research focuses on two major problems which are the (1) difficulty of scoping, representing, and systematically transforming recruitment problem knowledge towards e-recruitment solution specification; and (2) the difficulty of documenting e-recruitment best practices for reuse purposes in an enterprise recruitment environment. In this paper, a Problem-Oriented Conceptual Model (POCM) with a complementary Ontology for Recruitment Problem Definition (Onto-RPD) is proposed to contextualise the various recruitment problem viewpoints from an enterprise perspective and to elaborate those problem viewpoints towards a comprehensive recruitment problem definition. The POCM and Onto-RPD are developed incrementally using action-research conducted on three real case studies: (1) Secureland Army Enlistment, (2) British Army Regular Enlistment, and (3) UK Undergraduate Universities and Colleges Admissions Service (UCAS). They are later evaluated in a focus group study against a set of criteria. The study showed that the POCM and Onto-RPD provide a strong foundation for representing and understanding the e-recruitment problems from different perspectives.

Analysis of immediate effects of the COVID-19 pandemic on SMEs in Rwanda aims to assess and quantify the economic and financial impacts of the pandemic during the lockdown and presents options adopted by SMEs to reopen their business opera-tions. It also seeks to recommend options for sustainable and resilient economic recovery from the scars of COVID-19. This analysis used data collected from nearly 220 SMEs located across the country and applied an Exploratory Data Analysis (EDA) and multivariate linear regression models to measure the pandemic effects. The study revealed that firms downsized employment by 36.4 per cent, but data depict significant deviation within SMEs by their size. The COVID-19 pandemic has had a greater magni-tude of negative effects on sales levels among small businesses. Tax amounts were reduced amidst the crisis however, data do not show any significant variations among SMEs. Additionally, SMEs owners applied various coping mechanisms during re-opening. The study used firm-level data, providing detailed and reliable effects of the shocks on business performance. This analysis recommends establishing the medium-term financing and technical support for SMEs to ensure steady and sustainable recovery from pandemic effects as well as strengthening their resilience to any other socio-economics shocks.

Startups often face uncertainty and the potential Valley of Death. To address these challenges, Sustainable Development Goals (SDGs) can serve as a starting point to identify business opportunities in markets driven by SDG-related issues, which is, in this case, using Virtual Reality (VR) technology as a “painkiller.” This study aims to explore VR use cases and their implications for startup business models and discover a problem-solution fit—defined as the degree to which VR applications effectively address actual problems as “killer applications.” The study employs a customized customer discovery technique, an essential process in the Customer Development methodology. By exploring VR's applicability in various domains such as entertainment, training, education, and tourism, this study unveils compelling use cases that align with SDG aspects, thus validating the hypothesis on startups' potential to harness VR for SDG contributions. Furthermore, the study produces VR business model designs based on solutions to SDG-related problems. Thus, startups can function effectively as “painkillers,” offering solutions that are not only desired but urgently needed (problem-solution fit). The implications of these findings extend globally, underlining VR's role in addressing SDG issues and offering practical insights for startup business model development that are applicable to broader technology adoptions.

Karate is a martial art that originated in Japan It is characterized by its diverse techniques, including punches, kicks, strikes, and open hand techniques. Generally, karate practitioners shall execute techniques fast, with an impactful finishing towards the target. The present study aims to examine the effectiveness of customized gym sessions in enhancing the athletes’ general performance with a duration of 3-months’time. A total of 7 tests were monitored, i.e., anthropometric measurement, sit and reach test, stork balance stand test, T-test, counter movement jump, 20m sprint, and Yo-Yo endurance test. 4 male amateur athletes (state representative) that has practiced karate for at least 6 years, with at least 5 days training per week, were selected. The age ranges from 15 to 20 years old. The athletes were requested to have a proper rest (at least 7 hours sleeping time) five days before the actual test day. The results show that all athletes have at least maintained or improved stork balance for both legs. The balance improvement ranges from 0% up to 134.69%. However, both the T-test and 20m sprint test demonstrated a negative outcome. The time consumed to complete 20m is increased, which deteriorated the linear speed capability by 1.89% up to 8.93%. Also, 3 out of 4 athletes show that the T-test performance does not provide a satisfactory achievement. The agility of athletes was found to drop by 3.58% up to 10.60%. Interestingly, the athletes’ stamina was found to improve based on the VO2 max prediction and Yo-Yo test. The enhancement of VO2 max prediction and Yo-Yo test recorded as 0% - 7.53% and 9.09% - 20%, respectively. So far, there is no clear indicator on the flexibility of the athletes’ spine and length of the hamstring muscles, based on the sit and reach test. Short-term gym sessions with a duration of 3 months might improve the strength and body balance of athletes. However, the impact on the responsiveness and agility of athletes did not show any significant breakthrough. In future study, it is recommended that a large sample of participants should be included in the analysis.

Farm fragmentation is the occurrence of numerous and often discontinuous land parcels associated with a single farm. Farm fragmentation is considered to be a defining feature of Northern Ireland’s (NI) agricultural landscape, influencing agricultural efficiency, productivity, and the spread of livestock diseases. Despite this, the full extent of farm fragmentation in cattle farms is not well understood, and little is known of how farm fragmentation either influences, or is influenced by, different animal production types. This study describes and quantifies farm fragmentation metrics for cattle enterprises in NI, presented separately for dairy and non-dairy production types. We find that 35% of farms consist of five or more fragments, with larger farms associated with greater levels of farm fragmentation, fragment dispersal and contact with contiguous farms. Moreover, this was particularly evident in dairy farms, which were over twice the size of farms associated with non-dairy production types, with twice as many individual land parcels and twice as many fragments. We hypothesise that the difference in farm fragmentation and farm size between dairy and non-dairy production types is associated with the recent expansion of dairy farms after the abolition of the milk quota system in 2015, which may have driven the expansion of dairy farms via the acquisition of land. The high levels of land fragmentation, fragment dispersal and contiguous contact observed in NI cattle farms may also have important implications for agricultural productivity and epidemiology alike. Whilst highly connected pastures could facilitate the dissemination of disease, highly fragmented and parcellised land could also hamper productivity via diseconomies of scale, such as preventing the increase of herd sizes or additionally, adding to farm costs by increasing the complexity of herd management.

This study measures the technical and scale efficiency of Micro and Small Enterprises (MSEs) and input slacks using Data Envelop Analysis (DEA) model and identifies the determinants of efficiencies of MSEs by employing ordinary least square (OLS) econometrics model. A sample of 375 randomly selected MESs are included in the study. The study found that the average technical and scale efficiency of MSEs are relatively low; technical efficiency averaged at 30 percent and 38.4 percent under constant returns to scale (CRS) and variable returns to scale (VRS) assumptions, respectively. Besides, the overall average scale efficiency score of MSEs was estimated at 77.8 percent. The highest mean technical and scale efficiencies were registered in the construction (71.8 percent) and manufacturing (85.7 percent) sectors, respectively. Whereas, the lowest technical and scale efficiency goes to urban agriculture sector and service sector, with 38.9 percent and 67.2 percent, respectively. The level of inputs, enterprise age and sector, human capital, labor productivity variables significantly affect relative technical efficiency level of MSEs with different directions while variables such as start-up capital, gender of the enterprise manager and availability of support from the government identified statistically not significant in determining the MSEs’ technical efficiency.

This study proposes a customized industrial nozzle for generating impulsive air jets. It is installed on an automatic machine where wine caps are stacked and shot consecutively into a rotating cylinder by an air jet. This process is very noisy; hence, this study aimed to investigate possible geometric variations of the nozzle that can reduce the emitted noise. First, the nozzle was tested in a laboratory to measure the air consumption at different supply pressures. Subsequently, 3D models of the nozzle and its variations were created and used for computational fluid dynamics simulations. Different boundary conditions were set, first to validate the model and compare it with the experimental test results, and then to simulate the real working conditions and determine the geometry that is less noisy while maintaining the velocity peak. Among the various possibilities, shortening the final ducts of the nozzle appears to be the most promising solution. These modified nozzles could be easily added to current machines to provide immediate benefits, and this study represents a promising start for action on other machines where this type of device is present.

Allergen immunotherapy (AIT) with aeroallergens is the only disease modifying treatment for patients with different allergic conditions. Despite the effectiveness of AIT has been evidenced in both randomized controlled trials and real word studies, it remains underused in less than 10% of subjects with allergic rhinitis (AR) and/or asthma (A). We aimed to determine the current eligibility for house dust mite (HDM) AIT by means of a Precision Allergy Molecular Diagnosis (PAMD@) model in a selected cohort of youngsters with different allergic phenotypes according to the available evidence. A complex response to both HDM and storage mite allergens was depicted regardless of the subjects´ basal atopic condition. No solely specific IgE binding responses to Der p 1, Der p 2 and/or Der p 23 were found in the studied cohort. Despite patients with A and atopic dermatitis showed significantly higher serum titers to 6 mite allergens than subjects with AR, no specific molecular profile could be regarded as disease specific. Given the increasing complexity of specific IgE responses to the local prevailing aeroallergens, the identification and presence of such molecules are needed in commercially available AIT in the era of precision medicine.

The involved components of formulated blending, CNF and CuO NPs, were individually obtained by using a biorefinery strategy for agricultural waste valorization together with an optimized chemical precipitation, assisted by ultrasounds. The optimization of synthesis parameters for CuO NPs have avoided the presence of undesirable species which usually requires of later thermal treatment with associated costs. The aerogels-based structure, obtained by conventional freeze-drying, acted as 3D support for CuO NPs providing a good dispersion within the cross-linked structure of the nanocellulose and facilitating direct contact of the antibacterial phase against undesirable microorganisms. All samples showed a positive response against Escherichia coli and Staphylococcus aureus. An increase of the antibacterial response of the aerogels, measured by agar disk diffusion test, has been observed with the increase of CuO NPs incorporated, obtaining width of the antimicrobial “halo” (nwhalo) from 0 to 0.6 and 0.35 for S. aureus and E. coli, respectively. Furthermore, the aerogels have been able to deactivate S. aureus and E. coli in less than 5 hours when the antibacterial assays have been analyzed by broth dilution method. From CNF-50CuO samples, an overlap nanoparticles effect produced a decrease of the antimicrobial kinetic.

This paper utilizes the 2020 financial data of A-share listed companies, both ST and non-ST, as the data sample. The model is constructed employing the Factor-Logistic fusion algorithm. Eight key indicator factors were selected from the frameworks of profitability, solvency, operating capacity, development potential, shareholder retained earnings, cash flow and asset growth. An independent indicator system was subsequently established to address the issue of collinearity among risk indicators. The results of model are presented in the form of probabilities, enhancing the interpretability of model. The weights of the features indicate the influence of different features on the final outcome. The model achieves a prediction accuracy of over 89%, with an AUC score exceeding 95%. Finally, by applying the principles of interval estimation theory in statistical hypothesis testing, the risk levels are categorized as A-level representing significant risk, B-level representing moderate risk, C-level representing minor risk and D-level representing no risk. This paper aims to provide a comprehensive definition of a universal financial risk management warning model for enterprises, applicable to all enterprises in China.

Investments in small and medium-sized anaerobic digestion facilities have the potential to boost biogas production in Greece and other EU countries. This study aimed to evaluate the economic feasibility of anaerobic digestion facilities equipped with combined heat and power (CHP) units ranging from 50 to 400 kW, while treating livestock waste. For this purpose, data were gathered from various livestock operations (dairy cattle, poultry, swine, dairy sheep and goat) regarding their annual production, revenues, electricity and fuel usage, and waste generation. Waste samples were then collected and analyzed to assess their biochemical methane production potential. The capital and operational costs of anaerobic digestion facilities, from 50 and 400 kW, were calculated using the equations developed within the “eMT cluster” project. Findings indicate that current feed-in tariffs (FIT) of 0.21 € kWh-1 are insufficient to incentivize investment in anaerobic digestion facilities with capacities below 250 kW, highlighting the need for increased FIT rates or capital expenditure subsidies. Recommendations include shifting towards simplified technology and business models with reduced farmer involvement, coupled with supportive legislative framework and long-term electricity price guarantees. These measures are expected to foster the implementation of anaerobic digestion projects in the animal husbandry sector.

Background: Advancements in the next-generation sequencing (NGS) techniques have allowed for efficient genetic variant detection at reduced costs. Methods: We describe an ad hoc NGS-based custom designed resequencing gene panel to identify genetic variants in 8 patients with dementing disorders. Results: We found variants of TREM2 and APP genes in three patients; these have been previously identified as pathogenic or likely pathogenic and, therefore, considered as “Disease Causing”. In the remaining subjects, the pathogenicity was evaluated on the in silico analysis, according to the guidelines of the American College of Medical Genetics. In one patient, the p.R205W variant was causative of the disease, thus considered as “Possibly Disease Causing”. The variants found from the other four subjects in the CSF1R, SERPINI1, GRN, and APP genes revealed discordant in silico results and, therefore, it was not possible to assign a definitive pathogenicity. Conclusions: Notwithstanding the limitations of a customized panel, we detected some rare genetic variants with a probable disease association. The future application of NGS techniques and the further replication of these experimental data will replace the so-called “gene by gene” approach with a “panel of genes” strategy, that offers promising perspectives in the diagnosis and management of neurodegenerative disorders.

Is human capital heterogeneity a decisive factor for Chinese enterprises to invest in Africa? Based on the Outward Foreign Direct Investment (OFDI） data of Chinese enterprises in 37 African countries from 2007 to 2017, this paper using the FGLS model, is the empirical analysis of the mechanism and effect of the human capital heterogeneity of host countries on OFDI location selection. The human capital heterogeneity can be divided into four dimensions: scale, quality, cost and structure, which can be measured by health level, education level, wage level, child dependency ratio and old-age dependency ratio. The results show that: (1) the host country's human capital scale and child dependency ratio structure have a significant positive impact on decision-making for OFDI; (2) the cost of human capital and the structure of old-age dependency ratio are negatively correlated with the inflow of OFDI; (3) different from the existing conclusions, the quality of human capital will inhibit the inflow of OFDI in the sample period; (4) the extended test shows that the quality of human capital has a significant positive impact on OFDI decision-making. The results of robustness test are reliable. Finally, according to the conclusion of this paper, policy recommendations are put forward.

Adverse childhood experiences (ACEs) refer to traumatic life events in childhood that comprise abuse (e.g., psychological, physical, sexual), neglect (psychological and physical), indirect violence or household dysfunctions. Studies have found ACEs to be related to severe short-, medium- and long-term consequences in victims’ health. The current work consists of a real-world, multicentric, prevalence study of health outcomes in children <16 years suspected of ACEs by physicians. It relies on electronic health records and healthcare registries from a Portuguese local healthcare unit between January 2001 and December 2021 (N=40 536). Three health outcome groups were analyzed: (1) traumatic injuries and intoxications (2) mental health disorders, and (3) physical disorders. Keywords and ICD-9, ICD-10, and ICPC-2 codes from were employed. Children suspected of ACEs represent 2% (n=918). Social problems, injuries and intoxications, mental health disorders, and physical disorders arise in higher percentages in suspected victims than in non-suspected individuals. Findings uncover that child victims of ACEs may be underdiagnosed. Given the severe consequences for their current and future health, this should be taken as a critical warning for healthcare professionals. Detection and reports in health units are fundamental for early treatment, aiming to avoid an escalation of damage and prevent re-victimization.

Facilitating sustainable cooperation between schools and enterprises has become an important concern in many countries. However, there remains a gap in understanding the approaches taken by central and local governments to foster such cooperation through the lens of evolutionary game theory. Therefore, this paper aims to develop a quadrilateral evolutionary game model involving schools, enterprises, the central government, and local governments, to analyze the conditions under which governments can effectively promote school-enterprise cooperation. Our findings indicate that benefit is a decisive factor that affects the strategies of all parties. When the benefits of cooperation are sufficiently attractive, schools and enterprises are inclined to cooperate with each other independently of governmental intervention. While increasing incentives and penalties from the central government and local governments can stimulate school-enterprise cooperation, these measures are not sustainable in the long term. Additionally, the impact of the central government’s incentives and penalties on local governments in promoting school-enterprise cooperation is limited. Enhancing policy efficacy and the practical outcomes of school-enterprise cooperation is essential, which not only strengthens the bond between schools and enterprises but also ensures deep and enduring governmental involvement.

Void fillers are required for osseous gaps generated after orthopedic procedures as medial open-wedge high-tibial osteotomy (MOWHTO) to provide sufficient structural support and a rapid osteosynthesis. We developed a novel three-dimensional (3D) printing-based platform technology using the customized 3D scaffolds covered with polycaprolactone (PCL)/β-tri-calcium phosphates (β-TCP)/bone decellularized extracellular matrix (dECM) for use as bone substitute scaffold, which can be effectively exploited to estimate the calculated correction angle with preoperative simulations. PCL/β-TCP/bone dECM scaffolds demonstrated significantly higher cell contain levels in cell seeding efficiency, excellent proliferation capacity, and promotion of early osteogenic differentiation compared with PCL/β-TCP scaffolds. The scaffolds promoted bone mineralization at the early time points of an in vivo study (8 weeks) and exhibited biodegradable properties (38% for 16 weeks). The correction angle measured after osteotomy using 3D printed scaffolds was estimated with high accuracy with low errors (10.3° ± 0.9°), was and was not significantly different even in the presence of lateral cortical hinge fractures. The customized 3D scaffold enriched with PCL/β-TCP/bone dECM yielded excellent cell seeding efficiency, proliferation capacity, early osteogenic differentiation, and bone mineralization outcomes. It is expected to solve the disadvantages related with bone union in MOWHTO, and to replace autografts in the future.

Pediatric obesity management strategies suffer from a high rate of dropout and persistence of weight excess, despite the use of new tools, such as the automated mobile technology (MT). We aimed to compare the efficacy of two personalized MT protocols with/without monthly in-presence recalls in terms of better adherence to follow-up, and improved anthropometric and lifestyle parameters. MT contacts consisted in three not automated messages per week, inserted between three-monthly in-presence regular visits with (PediaFit 1.2) or without (PediaFit 1.1) monthly in-presence recalls. The sample included 103 children (mean age 10 years, range 6-14) recruited in the Pediatric Obesity Clinic between January 2017 and February 2019, randomized in Intervention group (IG) (n=24 PediaFit 1.1; n=30 PediaFit 1.2) and Control group (CG) (total n=49). Both IGs achieved significantly better results than the CGs for all considered parameters. Comparison of the two IGs at the 6th month showed that IG 1.2 had a statistically significant lower drop-out rate (10% vs. 62%), along with improved body mass index z-score, systolic blood pressure, sleep duration and physical activity. The study suggests that the hybrid association of messaging through personalized/not automated MT plus monthly in-presence recalls may be considered for a favorable outcome of pediatric obesity programs.

This study aims to explore the E-marketing orientations and relationship management constructs in Jordanian startup enterprises to examine their influence on brand visibility and loyalty in the context of the digital market . The sample consists of 161 managers in startup companies, and structural equation modeling is used to study the relationships between the constructs of e-marketing orientation, capabilities, E-relationship management, brand visibility, and loyalty. The results illustrate that the realization of e-marketing orientation is directly achieved by capabilities and visibility, thereby stressing the importance of a formulated digital market approach and that the realization of effective e-relationship management directly expression by e-marketing capabilities, demonstrating the significance of the digital market concept’s approach. The results further demonstrate that e-marketing capabilities and visibility serve as mediators between the realization of e-marketing orientations and loyalty, Two explanations may be drawn, one from the R resource-Based View theory, and another derived from R elationship M arketing T heory Thus, the study has theoretical implications in terms of R esource-Based V iew and R elationship M arketing T heory. The study offers essential managerial insights for practitioners into the entrepreneurship domain concerned with the necessity of e-marketing capabilities and E-RM attitudes at a customer-centered approach and the strategic application of digital channels to enhance visibility in the intense competition context. Therefore, the empirical results have contributions as essential insights for both stakeholders and account for practical, theoretical, and managerial perspectives in the entrepreneurship domain.

The purpose of this study was to determine the income, costs and revenue of the Gontor Putri 3 bakery. Want to know the efficiency of the bakery business in Karangbanyu Regency. The method used in this research is analytical descriptive by conducting a survey. The data used in this research is primary data. Data collection techniques use observation, interviews and documentation, while the process of analysis is quantitative descriptive. Using the R/C ratio, a value of 1.72 per month is obtained. This value indicates that the bakery factory in Karangbanyu is efficient because the value is more than one.

Social enterprises are very common in Birmingham having the largest concentrations of social enterprises in the United Kingdom. With the emergence of the Covid-19 pandemic, the operations and management of social enterprises in Birmingham has been greatly affected. This study seeks to analyse the impact of the Covid-19 pandemic on the operations and funding of social enterprises in Birmingham UK. In order to achieve this, the study is going to carry out a qualitative methodology in order to analyse the impact Covid-19 has had on social enterprises. The research is going to select relevant stakeholders through a non-purposive sampling criteria identifying individuals who have direct interest in the functioning of social enterprises. The relevant stakeholders will be expected to respond to semi structured interviews that are structured to evoke responses relevant to this area of research. The research realized that Social enterprises in Birmingham are a critical player in the economy of UK with many individuals depending on the social enterprise industry. In addition to that, the study realised that the Covid-19 pandemic exposed social enterprises to various financial and market risks. Moreover, social enterprises were forced to make a change in their organizational structure through cost management changes and offering alternative services. However, the government came in support through provision of grants and funding to boost the social enterprise economy.

The purpose of this study is to investigate the effect of innovation capability on business sustainability in Nigerian small and medium enterprises (SMEs), as well as consider the effects of organizational resilience, sustainable competitive advantage, and environmental dynamism as mediators in succession. The researchers adopted a quantitative approach and collected data from 401 employees in SMEs in the Lagos Metropolitan Area of Nigeria. We conducted the analysis of the collected data using the partial least squares approach (PLS-SEM). The researcher established that innovation capabilities are beneficial in ensuring business sustainability. Findings further corroborated the importance of sustainable competitive advantage and environmental dynamism for business sustainability. Finally, the results showed that environmental dynamism is important for helping small business owners keep their businesses sustained and increase their innovation capabilities. Similarly, the indirect paths also showed that resilience organizations like SMEs play a role in the paradigm. However, businesses can benefit from this study's findings by crafting strategies that adapt more quickly to changing market dynamics and capitalize on emerging possibilities. This way, businesses may take the necessary measures to stay ahead of the competition while guaranteeing sustainability. Even though the heuristic model emphasizes originality, current research on how to successfully link innovative capacity to sustainability and build sustainability in dynamic environments is sparse.

Micro and small wood-processing enterprises represent the heart of the European forest-based industries, being among the key drivers of economic growth in rural, mountainous, and poor regions. Their economic efficiency is of fundamental importance for their existence and the pro-vision of income for the local population in rural areas. Data Envelopment Analysis (DEA) is nonparametric, linear-programming-based approach, commonly used to analyse the efficiency of organizational units. This method allows estimating the economic efficiency of a certain eco-nomic system without assumptions about the functional form between resources and products. Furthermore, DEA determines the efficiency frontier and gives results of whether an enterprise, i.e., a Decision Making Unit (DMU) is efficient or not. The main objective of this study was to investigate and evaluate the economic efficiency of micro and small wood-processing enterpris-es in the EU countries and reveal the hidden inputs that facilitate efficiency generation. The eco-nomic efficiency evaluation was carried out on the basis of the official statistical data for the mi-cro and small wood-processing companies in the EU member states for the period 2015-2020 by performing a two-stage DEA analysis. The data used were standardized by value per employee. In addition to the first stage of DEA, fractional regression probit and logit models with four contextual variables were used to reveal the influence of the hidden inputs in the model. The results showed that the micro and small wood-processing enterprises can be regarded as more scale-efficient than technically-efficient entities. The only contextual variable affecting the eco-nomic efficiency was Investments per Person Employed, improving the efficiency by 2% per 1% increase of the investments.

Due to the imbalance between the supply and demand of oxygen, the oxygen system of iron- and steel-making enterprises in China has problems with high oxygen emission and high pressure in the pipelines, resulting in the energy consumption of oxygen production being high. To relieve this problem, using a large-scale iron- and steel-making mill as a case study, the research on demand forecasting and optimal scheduling of the oxygen system was carried out. The ARIMA model and the GABP model are employed to forecast oxygen demand. Based on the forecast results, an optimal scheduling model for the oxygen system was developed to conduct optimal scheduling. The case study shows that based on the oxygen demand forecast and the optimal scheduling, the oxygen emission and the pipeline pressure in the studied iron- and steel-making enterprise can be significantly reduced, thereby achieving considerable energy-saving effects and economic benefits. Specifically, the following conclusions are obtained: (1) For the oxygen demand forecast, the prediction accuracy of the GABP model is better than that of the ARIMA model. The average MAPE of the 12 sets of data of the ARIMA and GABP models are 23.8% and 20.2%, respectively. (2) By comparing the scheduling results and the field data, it is found that after the scheduling, the amount of oxygen emission has decreased by 6.32%, the pipeline pressure has decreased by 0.61%, and the energy consumption of oxygen compression has decreased by 1.6%. Considering both the oxygen emission loss and the energy consumption of oxygen compression, the total power consumption of the oxygen system is reduced by 1.38%, which saves the electricity cost of about 9.03 million RMB per year.

The field of mitochondrial genomics has advanced rapidly and revolutionized disciplines from molecular anthropology, population genetics, to medical/oncogenetics. However, mtDNA next-generation sequencing (NGS) analysis for matrilineal haplotyping and phylogeographic inference remains hindered by the lack of a consolidated, mitogenome database and efficient bioinformatics pipeline. To address this, we developed a customized human mitogenome database (hMITO DB) embedded in a CLC Genomics workflow for read mapping, variant analysis, haplotyping, and geo-mapping. The database was constructed from 4,286 mitogenomes. The macro-haplogroup (A to Z) distribution and representative phylogenetic tree were found consistent with published literature. The hMITO DB automated workflow was tested using mtDNA-NGS sequences derived from Pap smears and cervical cancer cell lines. The auto-generated read mapping, variants track, and table of haplotypes and geo-origins were completed in 15 min for 47 samples. The mtDNA workflow proved to be a rapid, efficient and accurate means of sequence analysis for translational mitogenomics.

Next-generation sequencing (NGS) has actualized human papillomavirus (HPV) virome profiling for in-depth investigation of viral evolution and pathogenesis. However, viral computational analysis remains a bottleneck due to semantic discrepancies between computational tools and curated reference genomes. To address this, we developed and tested automated workflows for HPV taxonomic profiling and visualization using a customized Papillomavirus database in CLC Microbial Genomics Module. HPV genomes from Papilloma Virus Episteme were customized and incorporated into CLC “ready-to-use” workflows for stepwise data processing to include: 1) Taxonomic Analysis, 2) Estimate Alpha/Beta Diversities, and 3) Map Reads to Reference. Low-grade (n = 95) and high-grade (n = 60) Pap smears were tested with ensuing collective runtimes: Taxonomic Analysis (36 min); Alpha/Beta Diversities (5 sec); Map Reads (45 min). Tabular output conversion to visualizations entailed 1-2 keystrokes. Biodiversity analysis between low- (LSIL) and high-grade squamous intraepithelial lesions (HSIL) revealed loss of species richness and gain of dominance by HPV-16 in HSIL. Integrating clinically relevant, taxonomized HPV reference genomes within automated workflows proved to be an ultra-fast method of virome profiling. The entire process named “HPV DeepSeq” provides a simple, accurate and practical means of NGS data analysis for a broad range of applications in viral research.

This study examines if enterprises’ digital transformation enhances their sustainable development capabilities and reduces carbon emissions, thus enhancing carbon neutrality performance and implementing the "dual-carbon" strategy. It specifically explores the impact of Chinese firms’ digital transformation on carbon neutrality performance in 30 provinces and municipalities in China from 2011 to 2021. Based on the Difference-in-Difference method and spatial econometric modeling, this study finds a U-shaped relationship between enterprise digital transformation and carbon performance, with spatial spillover effects. It also finds that converting environmental charges into taxes can significantly improve carbon performance. In terms of the mechanism of action, digital transformation affects carbon performance by influencing energy use efficiency and adjusting the level of industrial structure advancement and rationalization. In terms of heterogeneity, this U-shaped relationship exists only in the eastern and central regions, and the significance is more substantial in the east; in addition, the impact of enterprise digital transformation on carbon performance is more evident in regions with higher R&D intensity and higher economic development levels. These findings imply that the government should further encourage and guide enterprise digital transformation, monitor the effects of environmental protection policies and select and implement carbon emission reduction strategies according to local conditions to improve carbon performance.

The catalytically active vanadium-containing system on γ-Al2O3 was studied using a wide range of physical and chemical methods depending on the synthesis conditions. It is shown that the vanadium-containing system includes several complexes with different thermal stability and catalytic activity. Low-active complexes are destroyed with the formation of more active ones based on V2O5 oxide as the temperature of heat treatment increases. It can be assumed that the V2O5 oxide has the decisive role in its catalytic activity. It was concluded that the vanadium-containing catalytic system on aluminum oxide, in the studied temperature range, is thermal stable and shows high activity not only in the reduction of nitrogen oxides but also in the oxidation of hydrocarbons (even of the most difficult ones, such as oxidizable methane). These properties of the system make it quite promising in the field of application for purification of exhaust gases of motor transport and industrial enterprises from environmentally harmful components as well as for understanding the mechanism of the action of catalysts in these processes, which is very important for solving the problems of decarbonization and achieving carbon neutrality.

The paper presents a new vision on the energy consumption management in the case of the Small and Medium Enterprises (SMEs), integrated into an advanced decision support platform, with technical and economic benefits on increasing the energy efficiency, which contains modules for database management, profiling, forecasting, and production scheduling. Inside each module, Artificial Intelligence and Data Mining techniques were proposed to remove the uncertainties regarding the dynamic of technological flows. Thus, the data management module includes the Data Mining techniques, that extract the technical details on the energy consumption needed in the development of production scheduling strategies, the profiling module uses an original approach based on clustering techniques to determine the typical energy consumption profiles required in the optimal planning of the activities, the forecasting module contains a new approach based on an expert system to forecast the total energy consumption of the SMEs, and production scheduling module integrates a heuristic optimization method to obtain the optimal solutions in flattening the energy consumption profile. The testing was done for a small enterprise from Romania, belonging to the domain of trade and repair of vehicles. The obtained results highlighted the advantages of the proposed decision support platform on the decrease in the intensity of energy consumption per unit of product, reduction of the purchase costs, and modification of the impact whom the energy bills have on the operational costs.

Contemporary literature dealing with the governance and exploitation of common-pool natural resources was initiated by Elinor Ostrom in 1990, and has been growing fast ever since. On the contrary, within the same research stream, the study of the presence and economic role of common resources in entrepreneurial organizations is, to date, under-researched. This work endeavors to fill some gaps in this research perspective by: (i) spelling out a new-institutionalist framework for the analysis of the accumulation and governance of common capital resources within organizational boundaries; (ii) considering co-operative enterprises as the organizational form that, on the basis of historical record, and of behavioral and institutional characteristics, demonstrated to be most compatible with a substantial role for common and non-divided asset-ownership and with its governance thereof; (iii) evidencing and explaining the strong connection between cooperative longevity and the presence of non-divided asset ownership. The economic forces influencing the optimal level of self-financed common capital resources in co-operatives are enquired. Conclusions to the paper evidence the main reasons why the new approach can better explain than preceding ones the economic sustainability and longevity of cooperative enterprises.

This article explores the Role and Contributions of Small and Medium Enterprises (SMEs) in a globalized and innovative economy, looking specifically at the challenges and opportunities. The establishment and expansion of new firms provides a sizable amount of net new jobs. While high-expectation entrepreneurial enterprises and gazelles are usually found among innovative and technology-based new organizations, it is also essential that there be a sizable supply for them to play a significant part in economic growth. In other words, encouraging all forms of en-trepreneurship is likely to increase the number of innovative, fast-growing enterprises as well as entrepreneurship. In many European countries, entrepreneurship needs to be encouraged. Findings show the crucial role the SME sector plays in the South African economy in tackling sustainable development. About 90% of all official firms in South Africa are thought to be small, medium, or micro-enterprises. The study concluded that one of the major contributions to the South African economy is the SME sector. The SME is not just viewed as a source of new jobs, but also as a sector that absorbs laid-off workers from both the private and public sectors.

The ACEtabular rim eXtension (ACE-X) implant is a custom-made 3-dimensional-printed titanium device designed for the treatment of canine hip dysplasia. Thirty-four dogs (61 hips) underwent ACE-X implantation, and assessments were conducted using computed tomography, force plate analysis, Ortolani’s test, and Helsinki Chronic Pain Index (HCPI) questionnaires at five intervals: pre-operative day, surgery day, 1.5-month, 3-month, and 12-month follow-up. Statistically significant increases in femoral head coverage with negative Ortolani subluxation test were observed immediately after surgery and persisted throughout the study. Osteoarthritis (OA) scores remained stable, but osteophyte size significantly increased between the surgery day and the 12-month follow-up, especially in hips with a baseline OA score of 2 compared to those with a score of 1. Force plate data showed no significant changes during the study. The HCPI demonstrated a significant decrease in pain score from pre-operative value to 6-week follow-up and gradually decreased over time. Major complications were identified in 6 hips (9.8%) of 4 dogs. In conclusion, the ACE-X implant effectively increased femoral head coverage, eliminated subluxation, and provided long-term pain relief with minimal complications, benefiting over 90% of the study population. The study supports the ACE-X implant as a secure and valuable treatment for canine hip dysplasia.

This study aims to evaluate the financial performance of SOEs in Indonesia and compare it with private companies using financial ratio analysis and efficiency analysis approaches. Four construction sector SOEs were evaluated, and five private companies were compared using financial data from 2015 to 2022. The financial ratio analysis used the Peterson (2013) approach, while the efficiency analysis employed the data envelopment analysis (DEA) approach and the paired t-test. The study results show that the financial ratio performance of state-owned companies is relatively poor, with low profitability, critical liquidity, and a high debt ratio. Debt, as a source of capital in financing construction projects, makes companies face a greater debt risk. This study validates that SOEs have lower efficiency compared to private companies.

Due to the broadening of services from industrial enterprises to customers, the industrial network has gained more significance than what is really thought. As a part of this revolution, this paper tried to introduce the best suitable routing option for the healthcare, banking and internet services industries to optimize the routing department of their enterprises. RIP is not associated with this study, being out of favor in the industries due to hop count limitation. The idea behind doing such a thing is to avoid improper implantation of routing inside the enterprises which causes lack of optimization in routing department. The method which is selected for this paper is qualitative case study of banking, healthcare and internet services industries with unstructured interviews of IT experts of the respected industries in an open-ended questions fashion. The results were illustrated based on the stories and the discussion of the stories is the main contributor to the result of the study. The evaluation results of the stories have illustrated, that EIGRP is a suitable routing option for health care and banking, while OSPF can be suitable for the internet services industry. The implication of the study can be optimized network of industries such as healthcare, banking and internet services and it introduces the best suitable routing option for the demanded industries with the case study method and narrative analysis of the stories, which start from load balancing type and ends to demanded routing protocol, while reaching to demanded routing protocol, it introduces the best suitable routing option of that industry

With the continuous development of digital transformation and upgrading of Chinese construction enterprises, it is becoming increasingly important to measure their digital level, find the problems in the enterprise transformation process, and identify the key factors of enterprise digital capacity enhancement. This paper constructs a construction enterprise digital transformation maturity evaluation model from six first-level indicators and 20 second-level indicators, including digital strategy, digital business application, digital technology capability, data capability, digital organization capability, and change management. Digital maturity is divided into five levels: business management, process operation, intelligent construction, intelligent scene application, and industrial ecological collaboration. A detailed process of digital maturity evaluation based on the method of Analytic Hierarchy Process (AHP)-Decision Testing and Evaluation Laboratory (DEMATEL) is then developed. A questionnaire survey of 25 experts is used to weight the various parameters in the model, which is then demonstrated with an example construction enterprise. The model comprehensively reflects digital levels under the background of the digital economy. Its application will help understand the advantages and disadvantages enterprises face in their digital transformation to enable targeted measures to improve their digital transformation capabilities and efficiency, enhance their core competitiveness of enterprises, and promote the development of digital transformation in the construction industry.

This study aimed to identify the influencing factors that drive the adoption of smart construction technologies by highway construction companies. Using expert interviews and expert scoring, interview data were collected from 25 experts in the field, and the TOSE framework was proposed based on the TOE framework, identifying four dimensions and fourteen influencing factors. The results were analyzed using the Fuzzy-DEMATEL-ISM method, and the findings were then summarized according to the evaluation criteria to determine the validity of the fourteen hypotheses and the extent to which they drive the adoption of intelligent construction technologies by motorway construction companies. The findings of this paper will be of great value to decision-makers and participants in highway construction companies, as well as to other companies in the construction industry, in their decision to adopt smart construction technologies.

The purpose of this study is to examine the driving model of determinant factors that affects the performance of small and micro enterprises empirical evidence from Amhara Region, Ethiopia. The study used primary and secondary data from manufacturing, construction, urban agriculture, trade, and service entrepreneurs found in Bahirdar, Dessie & Gonder Cities using a purposive sampling technique. It also used the descriptive research design with a self-administered survey questionnaire. The Statistical analysis tools, SPSS and Amos, software were applied to analyze the data. Multiple regression model results revealed that access to credit, initial capital, working premises, industry category, market linkage, ICT adoption have a positive relationship and a major impact on the Amhara region's enterprise performance. Hence, the outcome variable, enterprise performance, is highly affected by all predicted variables. As the study finding shows, a lack of access to credit, , market linkage, working premises), initial capital, and information communication Technology problems are critical challenges of SMEs. The Regional Government, TVED Bureau, Micro Finance Institutions, , should take corrective action to provide sufficient credit and long-term loans to protect inflation. Moreover, this study proposed a sustainable cluster management approach that solves their challenges in an integrated way.

The purpose of this study is to examine the driving model of determinant factors that affects the performance of small and micro enterprises empirical evidence from Amhara Region, Ethiopia. The study used primary and secondary data from manufacturing, construction, urban agriculture, trade, and service entrepreneurs found in Bahirdar, Dessie & Gonder Cities using a purposive sampling technique. It also used the descriptive research design with a self-administered survey questionnaire. The Statistical analysis tools, SPSS and Amos, software were applied to analyze the data. Multiple regression model results revealed that access to credit, initial capital, working premises, industry category, market linkage, ICT adoption have a positive relationship and a major impact on the Amhara region's enterprise performance. Hence, the outcome variable, enterprise performance, is highly affected by all predicted variables. As the study finding shows, a lack of access to credit, , market linkage, working premises), initial capital, and information communication Technology problems are critical challenges of SMEs. The Regional Government, TVED Bureau, Micro Finance Institutions, , should take corrective action to provide sufficient credit and long-term loans to protect inflation. Moreover, this study proposed a sustainable cluster management approach that solves their challenges in an integrated way.

In an innovation driven business environment, cross-border access to resources is important for companies to improve innovation capabilities and development performance. Based on the previous research, it shows that there are barriers to cross domain communication among alliance firms because of the restriction of multidimensional ties and dyads. Simmelian ties, as a form of alliance network with ternary connections, it effectively restrained opportunism and self-interest in the cooperation process and take a crucial role to evaluate innovation related performance in corporation. Based on the theory of Simmelian, this paper builds a theoretical framework and proposes corresponding research hypotheses between Simmelian ties and enterprise innovation performance. After designing questionnaires, collecting data and conducting empirical analysis to test theoretical models and hypotheses. Results have shown that: (1) Simmelian ties generally have a positive impact on enterprise innovation performance. (2) Knowledge capturing and knowledge integration play a partial intermediary role between Simmelian ties and enterprise innovation performance, and the mediating chain formed by the two variables plays a serial mediating role in the effect. (3) Network routines significantly positively moderates the relationship between Simmelian ties and knowledge capturing. And also, the positive relationship between Simmelian ties and enterprise innovation performance is also actively moderated by network routines. The conclusion of this study is meaningful for companies to establish of Simmelian ties, improve knowledge management capabilities and further promote enterprise innovation performance.

Growth benefits of high speed rail (HSR) for enterprises are not automatic, but require a buoyant local economy and a robust strategy. Against above background, main objectives of ex-ante case study have been to investigate local socio-economic and spatial impacts of proposed HSR project around Ahmedabad station area on Mumbai-Ahmedabad HSR corridor, analyze the opportunities and challenges of HSR development and draw policy implications. Qualitative research methodology has been used to elicit the perceptions and perspectives of randomly selected 43 small, medium and large enterprises. Data has been analyzed using descriptive statistics. The study reveals that HSR induced greater human interaction will activate local economy, improve business efficiency and generate employment. Frequent travels on business trips can influence enterprises decision to settle near HSR station for easy access and likely to promote realty development. The proposed HSR project should be developed in synergy with urban dynamics of cities in transition and metropolitan service cities. Poor public transport connectivity is likely to be a major challenge in improving HSR accessibility and enhancing overall impacts of HSR, which can be improved by developing an integrated urban transport system, for which cooperation of all stakeholders and coherence with firms’ strategies is essential.

Green and low-carbon development has become an important embodiment of China's path to becoming a strong agricultural country. How to enable agricultural enterprises to better adopt green technologies and conduct production and operation with the concept of sustainable development has become a key link. This article utilizes a structural equation model (SEM) to analyze the role paths and mediating effects of organizational learning ability and policy orientation in agricultural enterprises' market orientation and willingness to adopt green technologies[ The definition of green technology in this paper refers to Guo Kesha, Tian Xiaoxiao. Green technology and green transformation of industrial development mode [J]. Tianjin Social Sciences, 2024 (02) :99-107, including green manufacturing (production) technology and green service technology.]. The results show that market orientation, organizational learning ability, and policy effectiveness have significant direct positive impacts on the willingness to adopt; market orientation has a significant positive impact on agricultural enterprises' organizational learning ability, organizational learning ability has a significant positive impact on policy orientation, and market orientation has a significant positive impact on policy effectiveness; the results of mediation analysis also indicate that learning ability has a significant mediating effect between market orientation and willingness to adopt, and policy effectiveness has a significant mediating effect between market orientation and willingness to adopt. Through difference analysis, it is believed that the mediating effects of the three paths are equally important, and organizational learning ability and policy effectiveness play a partial mediating role in agricultural enterprises' willingness to adopt green technologies. Based on this, policy suggestions are proposed to improve enterprises' own organizational learning ability, increase the promotion of policies related to green technologies, improve relevant policies for the application of green technologies, and increase research and development efforts for green technologies.

This study established a relationship between computerized accounting information systems (CAISs) and performance of SMS business enterprises in Burao, Somaliland. The main three objectives of this study were; (1) to assess the impact of computerized accounting information System on the performance of SMS business enterprises in Burao. (2) To measure the role of CAIS in the control system and management performance of SMS business enterprises in Burao. (3) To measure the impact of CAIS on the financial and operational performances in SMS business enterprises in Burao. The research approach of the study was quantitative research approach. The data used in this study was primary data obtained from the results of questionnaire survey on respondents. It was also utilized secondary data from the national documents, reports, different books, published materials and websites on the topic under the study. Using Slovene's formula, a sample size of 150 was used to collect data from respondents at SMS business enterprises in Burao through purposive sampling techniques. The data was analyzed through use of descriptive and inferential statistics. Reliability test and Validity test were also employed to test consistency of the measure and validity of data collected. The research findings indicated that there is a positive relationship between CAIS and the Performance of SMS business enterprises in Burao. This study recommended that SMS business should take advantage of the excellent benefits derivable from the adaption of well-designed CAIS because this will help to achieve a high and acceptable standard of quality in the performance of their business operations. The Management of SMS business enterprises (using CAIS) will benefit from this study understanding the impact of CAIS on their business practices. The academic generation and researchers will also benefit from the study in terms of literature review in matters of computerized accounting systems. In other terms, this will act as a point of reference for other future researchers.

At present, countries around the world adopt digital strategy, so that enterprises apply digital technology, digital supply chain, blockchain, and a series of digital measures to enhance their competitiveness. By analyzing the relationship between digital transformation of manufacturing export enterprises, and their business performance and export performance, this paper focused on the current situation and existing problems of digital transformation of manufacturing export enterprises in China. Based on the Resource Based View theory and Trade theory, the impact of digital transformation of enterprises performance, proposing hypotheses, and building regression models were explored. With the samples of 1007 listed companies in Shanghai and Shenzhen Stock markets from 2012 to 2019, the regression analysis, intermediate effect test, robustness test, stage lag, and heterogeneity analysis were conducted. The results shew that: (1) Listed manufacturing export enterprises carried out digital transformation, which had a significantly positive effect on enterprise performance; (2) It was found that digital transformation could improve enterprise performance by reducing costs, improving R&amp;D intensity and improving human resources etc. (3) According to the fractal analysis, non-state-owned enterprises had more positive effects on enterprise performance, and digital transformation of manufacturing export enterprises in developed areas had a more significant impact on enterprise performance. Finally, according to the empirical results, relevant suggestions for digital transformation were provided.

The objective of this case report is to introduce a customized CAD/CAM freeze-dried bone allograft (FDBA) block for its use in Guided Bone Regeneration (GBR) procedures for severely deficient maxillary bones. Additionally, a special newly developed remote incision technique is presented to avoid wound dehiscence. The results show an optimal integration behaviour of the FDBA block after six months and the formation of new vital bone. Thus, the results of the present case report confirm the use of the customized CAD/CAM bone block for augmentation of complex defects in the maxillary aesthetic zone as a successful treatment concept.

This study was conducted to propose the Green Economic Development Plan for Manufacturing S.M.E.s based on financial performance and operations thru Green Initiatives. The descriptive survey method used to gather data to determine the green initiative's implementation of small and medium (S.M.E.s) manufacturing enterprises. Green initiatives use as a basis for crafting a green economic development plan. Document analysis was also employed to obtain data from any available printed materials and records provided by the respondents. Such methods of gathering information used to validate data gathered from local and foreign-related literature. The observation also employed to survey the assets owned and validate any green initiatives practiced, including their implementation. The study's findings show that among the green initiatives implemented by SMMEs, which resulted in the reduction of total costs and expenses, were the proper disposal and segregation of waste materials, water management by recycling wastewater and using water-efficient equipment, natural resources, and raw materials management. SMMEs should encourage active participation and support of suppliers and customers in achieving G.E.D.'s objectives by developing incentive schemes.Furthermore, SMMEs should continue to benchmark with G.E.D. Practitioners are operating locally and abroad to adopt best greening strategies and regularly network with concerned government agencies for continuous updating on G.E.D. Initiatives that may benefit the firm. Further research may be conducted on green initiatives implemented by small and medium enterprises in other industry sectors.

Upon the implementation of the European Union Carbon Border Adjustment Mechanism (CBAM), substantial challenges are anticipated to impact the international trade of Chinese steel products. To safeguard the competitiveness of Chinese steel products on the global stage, this paper establishes a tripartite evolutionary game model, involving large steel enterprises, small and medium-sized steel enterprises, and the government. The model integrates collaborative emission reduction and free-riding benefits among enterprises, along with the government's dynamic subsidies and penalties. The paper analyzes the evolutionary trends and stable states of the three parties during different stages of CBAM, including a sensitivity analysis of key parameters. The findings indicate that large enterprises demonstrate a heightened sensitivity to CBAM, while small and medium-sized enterprises are more significantly influenced by free-riding benefits. Government intervention should be strategically timed and incline towards passive management during the strengthening phase of CBAM. Additionally, the refinement of the Chinese carbon market emerges as an effective means to counter CBAM. This paper provides theoretical support for how steel enterprises and the government can respond to CBAM, aiding stakeholders in selecting optimal strategies during different implementation stages and mitigating the impacts of CBAM to the maximum extent possible.

To promote low-carbon and green travel, this study proposes a tripartite evolutionary game model among new energy vehicle manufacturers, consumers, and government agencies. The game strategy combinations of each party and the stability conditions of the equilibrium point in the evolutionary game system are analyzed, and the validity of the conclusions is verified through simulation results. The study shows a strong correlation between the three parties in the evolutionary game system. From the perspective of car manufacturers, the probability of producing new energy vehicles is positively proportional to the subsidy received from new energy policy, the additional revenue gained from the management of the carbon trading scheme, and the fine received for producing conventional fuel vehicles. However, from the consumer perspective, the likelihood that consumers purchase new energy vehicles is positively related to the utility value to consumers and the coverage of public charging points in the city, and inversely related to the sales price of new energy vehicles. From the government perspective, a combination of direct subsidy policies and indirect support strategies should be considered to stimulate the rapid development of the new energy vehicle industry.

Aiming to investigate the impact of strategic knowledge disclosure on the continuous realization of digital innovation in enterprises, this study examines data from 168 listed companies across three high-tech industries in China from 2012 to 2021. By examining investor trust, consumer trust, worker trust, and rival trust as mediating variables within the market trust dimension, this research explores the impact mechanism of strategic knowledge disclosure on the sustainability of input and output in digital innovation. The findings reveal that strategic knowledge disclosure significantly promotes both input and output sustainability in digital innovation. Specifically, investor trust positively mediates the relationship between strategic knowledge disclosure and the sustainability of digital innovation input. Similarly, consumer trust and worker trust positively mediate the association between strategic knowledge disclosure and both input and output sustainability in digital innovation. However, it is important to note that rival trust negatively mediates the link between strategic knowledge disclosure and both input and output sustainability in digital innovation. The research findings possess significant theoretical value and provide valuable guidance for promoting the sustainable development of digital innovation in enterprises.

To both survive and develop continuously, enterprises must overcome many kinds of competition and challenges. Cultivating employees' active and sustainable organizational citizenship behavior is important for enterprises to successfully cope with turbulence and uncertain events during their development. In this study, we investigated the development level of and factors influencing employees' organizational citizenship behavior in current organizations. By using the Belief in a Just World Scale, Organizational Citizenship Behavior Scale, and Interpersonal Intelligence Scale, we investigated 230 employees from 15 different enterprises. The results showed that belief in a just world, interpersonal intelligence, and organizational citizenship behavior were significantly positively correlated. Interpersonal intelligence played a moderating role between belief in a just world and organizational citizenship behavior; the organizational citizenship behavior of individuals with high interpersonal intelligence increased with the strengthening of the belief in a just world, and this increase was larger than that experienced by individuals with low interpersonal intelligence. This meant that under a certain level of belief in a just world, a high level of interpersonal intelligence was more conducive to promoting employees' sustainable organizational citizenship behavior.

The study aims to evaluate the impact of organizational culture on labor efficiency at foreign-invested logistics service enterprises that are on its ways towards business sustainability. The authors develop theoretical basis on organizational culture and explore factors that contribute to organizational culture and labor efficiency; from which 03 research hypotheses are proposed. Primary data are collected from logistics businesses through questionnaires; multiple linear regresion model is used to analyze the influence of organiational culture on labor effeciency at foreign-invested logistics enterprises. Research results indicate 05 factors of organizational culture contribute positive impact on employee productivity, including employees’ trust, company ideals, leadership styles and authority division, business philosophy and mission, people’s relationship with naturual environment. Based on the research results, proposed recommendations are suggested for improving labor efficiency at foreign-invested logistics service enterprises in a sustainable way.

The paper analyzes the actions that improve innovativeness in production enterprises in the Silesian province. Innovation is one of the elements that allows to achieve a competitive advantage. It turns out justified to research various factors that are important in improving innovativeness. The research includes selected production enterprises in the Silesian province, adopting the descriptive statistics measures and statistic tests: random sample test, chi-square independence test and the non-parametric Kruskal-Wallis test based on a survey questionnaire. As part of the most important factors determining the possibilities of innovation by manufacturing companies were detected contacts with other enterprises, R&D centers and counseling institutions, competitive position of the company and creating appropriate incentive systems.

At present, under the background of high-quality development and the “carbon peaking and carbon neutrality” goal, China’s economic structure, industrial structure and energy structure have all begun green transformation and upgrading. The supply chain has become an important starting point for energy conservation and carbon reduction. In this context, enterprises have also ushered in huge environmental risk challenges and innovative development opportunities. This paper adopts Entropy-Weighted TOPSIS comprehensive evaluation method to analyze the green supply chain performance of "B" company, a new energy leading company, based on the theory of green development and corporate social responsibility. By establishing a green supply chain evaluation criteria system including four dimensions of finance performance, environment performance, operation performance and innovation performance, the weight of each evaluation criterion is objectively analyzed and calculated, and the green supply chain performance of "B" company from 2018 to 2022 is ranked. Based on this, comprehensive evaluations and sub-dimension evaluation are carried out and suggestions for improvement are put forward. At the same time, we hope to help other new energy vehicle companies optimize their own green supply chain practice mode.

Digital infrastructure is the basic guarantee for digital transformation, it is of practical significance to discuss how to effectively use digital infrastructure construction to promote the digital transformation of tourism enterprises. This paper examines the impact of digital infrastructure construction on tourism enterprises based on the "Broadband China" policy as a quasi-natural experiment. A-share tourism listed enterprises from 2010 to 2021 are studied using the double difference method. Findings indicate that digital infrastructure construction positively and significantly influences the digital transformation of tourism enterprises, driven by digital leadership and innovation capabilities. State-owned, small-scale, and high-growth tourism enterprises benefit more from this transformation. The results suggested that the state should develop differentiated digital infrastructure plans based on the specific conditions of different tourism enterprises. Additionally, tourism enterprises should enhance digital leadership and innovation capabilities through strategic changes and digital applications to amplify the impact of digital infrastructure on their transformation.

The aim of the study was to compare the standard baseline imaging, with extended radiological staging. To assess our hypothesis, we performed a prospective, single-centre study which included 132 participants recruited between October 2015 and March 2020. Descriptive statistics, the Friedman and chi-squared tests were performed and p &lt; 0.05 was considered significant. Patients were grouped into two cohorts, CT scan cohort (n=87) and PET-CT cohort (n=43). In the first group the originally determined disease stage changed in 36.8 % of cases, in second group in 51.2 %. The consistency between assessment of axillary lymph nodes by imaging (cN) and the postoperative pathology report (pN) was evaluated. In most cases, clinical and pathological evaluation of involved nodes was consistent, for CT scan the result was χ2(1) = 18.98; p &lt; 0.001, for PET-CT the result was χ2(1) = 6.41; p = 0.03. Highly customized radiation therapy defined as dose boost within the involved lymph nodes, not covered by surgeon, was applied in nine patients.

Sustainable Forest Management (SFM) can fully use forest resources and improve the economic, environmental and social sustainability of forest areas. Forestry enterprises play a crucial role in the implementation of SFM. To better play the role of forestry enterprises in implementing SFM, it is necessary to establish a comprehensive and reasonable performance evaluation model for SFM in forestry enterprises. However, the previous literature pays little attention to this research question. Taking the Triple Bottom Line (TBL) as a theoretical framework and the Montreal Process Criteria and Indicators (MP C&I) as a basis, this paper constructs an indicator system to evaluate the performance of SFM of forest enterprises from economic, social and environmental aspects. This paper applies the integrated MCDM method, i.e. the BWM method and the VIKOR method, to construct the methodological system for SFM performance evaluation of forestry enterprises. The effectiveness of this SFM performance evaluation model is then demonstrated through its application to a case study of forestry enterprises in China. Through the application of the model, this paper evaluates the enterprise's SFM performance over the five-year period 2017-2021 and proposes appropriate policy recommendations and improvements.

The main purpose of the work is to indicate the effects of the implementation of the concept of sustainable production from the perspective of the well-being of employees. The diagnosis was made among manufacturers operating in the sector of agricultural technical means of transport (production of parts and subassemblies). Achieving the main goal required the formulation and implementation of partial goals, which the authors included: (C1) analysis of the concept of sustainable production from the perspective of employees' well-being (theoretical plane); (C2) compiling a research model in the form of an evaluation sheet being the result of a literature query and an expert study (theoretical and design layer); attention was paid to the articulation of categories relevant to the content and scope of research; (C3) verification of the research model (indication of the effects of the implementation of the concept of sustainable production (the perspective of employee well-being) by the surveyed enterprises).

This study explores the impact mechanism of the service-oriented transformation of new energy enterprises on the satisfaction of employee performance evaluation systems under the background of China's electricity market reform. Using CGN New Energy's Guangxi branch as a case study, and adopting the grounded theory method, this research systematically analyzes the influencing factors and action paths of the service-oriented transformation on the satisfaction of employee performance evaluation systems through in-depth interviews and questionnaires. The study finds that the service-oriented transformation significantly enhances employees' sense of professional achievement and skill levels but also increases work pressure and psychological burden. Optimizing the performance evaluation system and improving its fairness and transparency are key to enhancing employee satisfaction. The research results provide a scientific basis for the management practices of new energy enterprises and hold significant reference value for relevant policy-making.

Background: Early diagnosis of postoperative complications is an urgent task, allowing timely prescribing of appropriate therapy and reducing the cost of patient treatment. Prognostic models based on various data could help in the early diagnosis of postoperative complications after cardiac surgery. Objectives: The purpose of the study was to determine whether an integrated approach based on clinical data along with metabolites and biomarkers had greater predictive value than the models built on less data. Methods: The study included patients (n=62) admitted for planned cardiac surgery (coronary artery bypass grafting with cardiopulmonary bypass), who were retrospectively divided into two groups depending on the presence (n=26) or absence (n=36) of postoperative complications of all types. Clinical and laboratory data on the first day after surgery were analyzed. Additionally, patients' blood samples were collected before and on the first day after surgery to determine biomarkers (interleukin-6, procalcitonin, NT-proBNP, high-sensitivity troponin T) and metabolites (8 aromatic and 2 dicarboxylic acids were detected using gas chromatography-mass spectrometry). Results: Patients before surgery, compared with healthy donors, differed in the concentration of metabolites (p &lt; 0.05), and had concentrations of a number of biomarkers exceeding the corresponding reference values. Multivariate PLS-DA models, predicting the presence or absence of postoperative complications, were built using clinical data (ROC-AUC=0.71), concentrations of metabolites and biomarkers (ROC-AUC=0.60), and the entire data set (ROC-AUC=0.75). For comparison we built univariate models using the EuroScore2 (ROC-AUC=0.59) and SOFA (ROC-AUC=0.76) scales; concentrations of lactate (ROC-AUC=0.71), the dynamic changes of 4-hydroxyphenyllactic acid (ROC-AUC=0.69), and the sum of three sepsis-associated metabolites (ROC-AUC=0.70). The proposed complex model using entire data set was comparable to the SOFA scale, which confirms the expediency of searching for new predictive models based on a variety of factors.

Milk serves as a crucial source of natural bioactive compounds essential for human nutrition and health. The gastrointestinal digestion of milk proteins releases various biologically active peptides that positively impact human health and enhance physiological performance. With the growing production of cheese, Greek yogurt, and other dairy products, the volume of unutilized acid whey is significantly increasing. Acid whey, containing almost all whey proteins and approximately one-quarter of casein, presents a valuable raw material for generating peptides with potential health benefits. These peptides exhibit properties such as antioxidant, antimicrobial, anti-inflammatory, anticarcinogenic, antihypertensive, antithrombotic, opioid, mineral-binding, and growth-stimulating activities, contributing to improved human immunity and the treatment of chronic diseases. Enzymatic hydrolysis of milk proteins has been developed as a method to produce these peptides, facilitating their use in food fortification. To incorporate whey into functional beverages, it undergoes fermentation by lactic acid bacteria with proteolytic activity. To specifically enrich these beverages with peptides exhibiting targeted bioactivities, it is essential to select lactic acid bacteria strains possessing the requisite protease profiles. Additionally, the sensory properties of the final product can be enhanced using starter cultures with diverse metabolic capabilities, even in the absence of added flavoring agents. Given the imperative to develop waste-free technologies and enhance the profitability of the dairy industry, there is a growing need to efficiently utilize and transform acid whey into a broad spectrum of valuable products and food additives. This approach is justified not only by the nutritional benefits of the bioactive components in whey but also by the commercial potential of safe and health-enhancing products.

The paper focuses on the application of a multilevel, integrative and territorial approach to the protection of cultural heritage through planning instruments in Serbia. It points out the problems of the sectoral approach and discusses international recommendations that can be integrated into the planning methodology. The case study is the area of Djerdap National Park, which has an already established international and national importance. The research suggests that the cultural heritage in the area, with the exception of the Roman limes, is still recognized at the level of individual localities. The study emphasizes the importance of aligning all levels of governance to safeguard the whole spatial entity rather than focusing solely on its particular areas. The interna-tional and national importance of the planning area contributes to the strengthening of awareness of heritage and its institutional protection. However, the vitality of the area, which is key to its sustainable development, comes from the local level. Planning documents contribute to the inte-gration of local values and local communities into development programs and projects.

The impact of interaction SS with MJO on rainfall along Java Island to East Nusa Tenggara has been studied using daily rainfall observation data from 2140 weather observation stations, which are also equipped with GSMaP, OLR, and ERA5 data. There were 61 SS events found, 17 during active MJO and 44 in inactive MJO. Rainfall increases more in the western study area when the active MJO and more in the eastern study area when the inactive MJO is due to SS. SS reduces rainfall in the Jakarta region, regardless of the activity or inactivity of the MJO. SS causes extreme rainfall to only occur in a small part of certain areas, so it tends to significantly reduce the possibility of extreme rainfall. In the southern part of the IMC, SS predominates over MJO in supporting increased water vapor transport. Large-scale synoptic circulations like the monsoon, SS, and MJO can interact with local land-sea wind circulation to produce spatiotemporal variability in rainfall on Java Island. Rainfall mostly increases in the afternoon and decreases in the morning when SS occurs, whether there is MJO or not. Convective instability analysis indicates that SS increases precipitation, most likely by lowering CIN and raising VIMFC.

In order to shorten the detection time and improve the average precision on embedded devices, A lightweight and high accuracy model is proposed for passion fruit in complex environments (backlight, occlusion, overlap, sunny, cloudy, rainy). Firstly, replacing the backbone network of YOLOv5 with a lightweight GhostNet model reduces the number of parameters and computation while improving detection speed. Secondly, a new feature branch is added to the GhostNet network, and the feature fusion layer in the neck network is reconstructed to effectively combine the lower-level and higher-level features, which not only improves the accuracy of the model but also maintains its lightweight. Finally, the knowledge distillation methods are used to transfer the knowledge from the more capable teacher model to the less capable student model, which significantly improving the detection accuracy. The improved model is denoted as G-YOLO-NK. The average accuracy of the G-YOLO-NK network is 96.00%, which is 1.00% higher than the original YOLOv5s model. Furthermore, the improved model size is 7.14MB, reduced to half of the original model, and the real-time detection frame rate is 11.25 FPS on the Jetson Nano. Compared to the state-of-the-art model, the proposed model outperforms them in terms of average precision and detection performance. The present work provides an effective model for real-time detection of passion fruits in complex orchard scenes, which can provide valuable technical support for the development of orchard picking robots and greatly improve the intelligence level of orchards.

The Simultaneous Localization And Mapping (SLAM) scanner is an easy and portable Light Detection And Ranging (LiDAR) data acquisition device. Its main output is a 3D point cloud covering the scanned scene. Regarding the importance of accuracy in the survey domain, this paper aims to assess the accuracy of two SLAM scanners: the NavVis VLX and the BLK2GO Scanner. This assessment is conducted for both outdoor and indoor environments. In this context, two types of reference data are used: the Total Station (TS) and the static scanner Z+F Imager 5016. To carry out the assessment, four comparisons are tested: cloud to cloud, cloud to mesh, mesh to mesh, and edge detection board assessment. However, the results of the assessments confirm that the accuracy of indoor SLAM scanner measurements (5 mm) is greater than that of outdoor ones (between 10 mm and 60 mm). Moreover, the comparison of cloud to cloud provides the best accuracy regarding direct accuracy measurement without manipulations. Finally, based on the high accuracy, scanning speed, flexibility, and the accuracy differences between tested cases, it is confirmed that SLAM scanners are effective tools for data acquisition.