Based on literature data, an analysis was conducted on the thermodynamic and kinetic dependencies of the thermal decomposition of methane. Course of this process was analysed for both thermal and thermal-catalytic conditions. The elementary reaction, i.e. the synthesis of methane from its elements, including its reversibility, was used as the basis for the for considerations on the kinetic model. The conversion degree was adopted as the kinetic parameter (kinetic variable) since this measure is essential for determining the amount of carbon deposit formed and thus closing the mass balance of this process. Several different kinetic models for the elementary reaction were analysed to determine how do they relate in regard to the constant of the reaction rate. It was determined that regardless of whether the process is catalytic or purely thermal, for temperatures t>900°C, the influence of reversibility of the reaction, has negligible influence on the yield of hydrogen produced, and thus can be omitted from the kinetic models. Special attention was given to iron-based catalysts, analysing the reactivity of Fe/C systems. It was demonstrated that the determined kinetic parameters satisfy the Kinetic Compensation Effect (KCE). Furthermore, by incorporating elements of Transition State Theory (TST), the existence of Entropy-Enthalpy Compensation (EEC) was highlighted. Based on these findings Authors show that through analysis of the changes in activation energy (E=20–421 kJ·mol-1) only an estimate of the optimal process conditions can be found, because the isoconversional temperature is also dependent on the way in which the reaction is conducted (T_{iso}=1200-1450K\ >\ \ T_{eq}). In other words, it was found that strong influences of such factors as T, P, etc. can locally compensate each other. Finally, it was also shown that the relations between KCE and EEC complement each other, which is confirmed by the determined average activation entropy at the isokinetic temperature (∆SB= -275.0 J·(mol·K)-1).

The COVID-19 infections in Pakistan are spreading at an exponential rate and a point may soon be reached where rigorous prevention measures would need to be adopted. Mathematical models can help define the scale of an epidemic and the rate at which an infection can spread in a community. I used ARIMA Model, Diffusion Model, SIRD Model and Prophet Model to forecast the magnitude of the COVID-19 pandemic in Pakistan and compared the numbers with the reported cases on the national database. Results depicts that Pakistan could hit peak number of infectious cases between June 2020 and July, 2020.

Monkeypox is a zoonotic illness caused by the Orthopoxvirus monkeypox virus (MPXV). Since 1970, outbreaks of MPXV have occurred in several Sub-Saharan African countries. However, from May 2022 to April 2023, recent outbreaks of MPXV occurred in several countries outside of Africa, and these cases quickly spread to over 100 non-endemic countries on all continents. Because of this, in July 2022, World Health Organization declared monkeypox a Public Health Emergency of International. MPXV disproportionately affects men who have sex with men and members of the HIV-infected population. The current strategy for control and pre-exposure prophylaxis or post-exposure prophylaxis for people at high risk is vaccination. In this context, Peru has the fourth-highest number of MPXV cases in Latin America. Because of this, in this review, we describe public health indicators in Peru and reflect on the COVID-19 pandemic so that health authorities can join forces to identify and control MPXV transmission routes.

The COVID-19 epidemic and the measures adopted to contain it have had a significant impact on energy patterns throughout the world. The pandemic and movement restrictions led to unpredictable fluctuations in power systems demand and the fuel price for a delayed period. Monkeypox, another viral disease, appeared during the post-COVID period. It is assumed that the outbreak of monkeypox is unlikely due to the implication of preventive measures experienced by COVID-19. At the same time, the probability of an epidemic cannot be blindly overlooked. This paper aims to examine and analyze historical data to look at how much petroleum fuel was used for generating power and how the price of petroleum fuel changed over seven years, from January 2016 to August 2022. This period covers the time before the COVID-19 pandemic, during the pandemic, and after the pandemic. Several time-series forecasting models, including all four benchmark methods (Mean, Naïve, Drift, and Snaïve), Seasonal and Trend decomposition using Loess (STL), Exponential Smoothing (ETS), and Autoregressive Integrated Moving Average (ARIMA) methods have been applied for both fuel consumption and price prediction. The best forecasting method for fuel price and consumption has been identified among these methods. The paper also utilizes the ARIMAX model by incorporating multiple exogenous variables, such as monthly mean temperature, mean fuel price, and mileage of vehicles traveling during a certain period of pandemic lock-down. It will assist in capturing the non-smooth and stochastic pattern of fuel consumption and price due to the pandemic by separating the seasonal influence and thus provide a prediction of the consumption pattern in the event of any future pandemic.

In numerical simulations, achieving high accuracy without significantly increasing computational costs is often challenging. To address this, this paper presents an improved finite volume weighted essentially non-oscillatory (WENO) scheme tailored for applicability in computational fluid dynamics (CFD) and implemented in the flow solver NUAA-Turbo for simulating turbomachinery flows using both RANS and RANS/LES coupling. Firstly, the new WENO scheme is validated against classic numerical test cases to assess its stability and reliability in handling discontinuities, the Double problem, and Raleigh-Taylor (RT) instability issues. Compared to the original format, this enhanced finite volume WENO scheme demonstrates superior stability near discontinuities and resolves flow features with the same grid resolution more effectively. Next, for engineering applications related to turbomachinery, such as compressor and turbine characteristics, computations are performed using RANS, and the results obtained using WENO-ZQ3 and WENO-JS3 are compared. Finally, the new fifth-order WENO scheme is applied to RANS/LES coupled simulations of turbine wakes and film cooling. The results show that the enhanced finite volume WENO scheme offers improved stability and accuracy in engineering applications, allowing for high-precision calculations with fewer grid points to capture more detailed flow physics, thereby reducing computational costs in aerodynamic applications.

To conduct high-precision and high-resolution numerical simulation of complex flow structures in turbomachinery, a high-order finite volume weighted essentially non-oscillatory (WENO) scheme for the large eddy simulation (LES) is improved and embedded into the three-dimensional viscous unsteady CFD solver NUAA-Turbo. Firstly, the spectral characteristics and unsteady convergence of the improved WENO scheme are studied. Compared with the classical WENO scheme, the improved WENO scheme has better dissipation and dispersion characteristics and faster convergence speed. Then, the coefficient CW of the Wall-Adapting Local Eddy-viscosity (WALE) model is calibrated by decaying homogeneous isotropic turbulence (DHIT) test case. Finally, the scheme is applied to conduct high-precision LES calculations of turbulent boundary layer flow, supersonic compression corner flow, and low-pressure turbine cascade separation flow. The numerical simulation results show that this WENO scheme has excellent shock wave capture ability and turbulence resolution and can capture more flow field details with less mesh size, greatly reducing the computational cost and laying a foundation for large-scale engineering application of LES.

There are various types of charged particles in the space environment, which can cause different types of radiation damage to materials and devices, leading to on-orbit failures and even accidents of spacecraft. Developing lightweight and efficient radiation shielding materials is an effective approach to improve the inherent protection of spacecraft. The protective performance of different materials against proton and electron spectra in the Earth’s radiation belts is evaluated by Geant4 simulation. Based on the simulation results, suitable hardening components are selected to design composite materials, and B4C/PEEK composites with different B4C content were successfully prepared. Experimental results demonstrate that the simulated and experimental results for the electron, proton and neutron shielding performance of B4C/PEEK composites are consistent. These composites exhibit excellent radiation shielding capabilities against electrons, protons and neutrons, and the radiation protection performance improves with increasing B4C content in the B4C/PEEK composite materials.

This study investigates cloud cavitation suppression around a model scale NACA66 hydrofoil using active water injection and explores the effect of multiple injection parameters. Numerical simulations and a mixed-level orthogonal test method are employed to systematically analyze the impact of jet angle αjet, jet location Ljet, and jet velocity Ujet on cavitation suppression efficiency and hydrofoil energy performance. The study reveals that jet location has the greatest influence on cavitation suppression, while jet angle has the greatest influence on hydrofoil energy performance. The optimal parameter combination (Ljet = 0.30C, αjet = +60 degrees, Ujet = 3.25 m/s) effectively balances energy performance and cavitation suppression, reducing cavitation volume by 49.34% and improving lift-drag ratio by 8.55%. The study found that the jet's introduction not only enhances vapor condensation and reduces the intensity of the vapor-liquid exchange process but also disrupts the internal structure of cavitation clouds and elevates pressure on the hydrofoil suction surface, thereby effectively suppressing cavitation. Further analysis shows that positive-going horizontal jet components enhance the lift-drag ratio, while negative-going components have a detrimental effect. Jet arrangements near the trailing edge negatively impact both cavitation suppression and energy performance. These findings provide valuable reference for selecting optimal injection parameters to achieve a balance between cavitation suppression and energy performance in hydrodynamic systems.

In modern warfare, the diversified tasks can sometimes be challenging to fulfill with a single projectile, necessitating the incorporation of cooperation constraints in trajectory planning. Limited by the stringent requirements of the launch platform and lower costs, the maneuverability and ability to adjust the flight time range of projectiles are weak. Therefore, the rationality of performance indicators and flight time coordination strategies is especially critical. To fully exploit the control capabilities of projectiles, a battlefield area segmentation method is proposed, differentiated performance indicators and a cooperative trajectory planning model that considers the entire range of projectiles are established. Considering the limitations of existing flight time coordination strategies in applications, targeted improvements have been made in different cooperation scenarios, and a bi-level adaptive cooperation strategy(BACS) with both optimality and flexibility is proposed. To rapidly determine feasible conditions, a simple and universal method for obtaining the capability ranges of cooperation is introduced. The multi-phase optimal control problems are transformed into nonlinear programming problems using the Radau pseudo-spectral method, and simulation results show that the proposed methods are capable of handling trajectory planning tasks in different cooperation scenarios. The improved strategies effectively enhance the planning success rate under relatively harsh conditions and BACS demonstrates good compatibility with the problems studied.

Due to constraints in launch platform and cost, the maneuverability of gliding-guided projectiles is limited, necessitating a rational design of their trajectory schemes. To reduce the sensitivity of trajectory schemes to uncertainties while ensuring compatibility between flight schemes and guidance control systems, and fully exploiting the control capability of the projectile, a closed-loop robust trajectory planning method is proposed. Models of major uncertain factors and states deviation at the control-start point are established. Based on the NIPCE method, the stochastic dynamic model is transformed into a high-dimensional deterministic model with PCE coefficients as state variables, and the uncertainty propagation law is obtained. A PID algorithm is employed to design a tracking guidance law based on position error feedback, and open-loop and closed-loop robust trajectory planning models are established accordingly. The optimal control problem is solved by transforming it into a nonlinear programming problem using the direct shooting method. Simulation results indicate that the NIPCE method can significantly improve the computational efficiency of uncertainty propagation while ensuring accuracy. Open-loop robust planning can effectively mitigate the sensitivity of gliding trajectories to uncertainties but cannot completely eliminate terminal dispersion. Closed-loop robust planning effectively improves control effort consumption on the basis of open-loop planning.

Many people in the USA have lost their lives or become addicted to opioids via prescription opioids given for chronic pain. The chronic pain epidemic has emerged due to a convergence of factors, including the medicalization of pain as well as injuries happening in the workplace, in the home, or during recreation. Opioid prescriptions rose precipitously from the late 1990’s through to approximately 2020, and despite public awareness, still are increasing. This review examines literature on integrative approaches to chronic pain as delineated by pain type. The review is organized by the most common causes of chronic pain, and randomized controlled trials, meta-analyses and systematic reviews are extracted for each cause of chronic pain. Several promising interventions may alleviate chronic pain of some causes, and some interventions may work across pain causes. Lowering inflammation through dietary or lifestyle regimens may be a general way of reducing pain. Pain can be alleviated through several adjunctive and integrative treatment approaches, which may serve to lower the need for opioid medication.

The oscillating heat pipe (OHP) is a new member in the family of heat pipes, and it has great potential applications in energy conservation. However, the fluid flow and heat transfer in the OHP as well as the fundamental effects of inner diameter on them have not been fully understood, which are essential to the design and optimization of the OHP in real applications. Therefore, by combining the high-speed visualization method and infrared thermal imaging technique, the fluid flow and thermal performance in the OHPs with inner diameters of 1, 2 and 3 mm are presented and analyzed. The results indicate that three fluid flow motions, including small oscillation, bulk oscillation and circulation, coexist or, respectively, exist alone with the increasing heating load under different inner diameters, with three flow patterns occurring in the OHPs, viz. bubbly flow, slug flow and annular flow. These fluid flow motions are closely correlated with the heat and mass transfer performance in the OHPs, which can be reflected by the characteristics of infrared thermal images of condensers. The decrease in the inner diameter increases the frictional flow resistance and capillary instability while restricting the nucleate boiling in OHPs, which leads to a smaller proportion of bubbly flow, a larger proportion of short slug flow, a poorer thermal performance, and easier dry-out of working fluid. In addition, when compared with the 2 mm OHP, the increasing role of gravity induces the thermosyphon effect and weakens the 'bubble pumping' action, which results in a little smaller and bigger thermal resistances of 3 mm OHP under small and bulk oscillation of working fluid, respectively.

In the proposed article, the issues of increasing the synchronizing ability of the system of coordinated rotation of asynchronous motors are considered. Based on the T-shaped equivalent circuit, electromechanical relationships were obtained with changes in the value of the total rotor resistance and the supply voltage of individual motors. An algorithm for calculating the torques, stator and rotor currents of the motors of the system has been compiled. Based on the calculations obtained, the mechanical characteristics of the system asynchronous motors are constructed for various values of total resistance, supply voltages and rotor positions. The obtained data and graphs confirm the adequacy of the theory obtained in an analytical way. Functional and structural diagrams in small scales have been compiled, which allow simulating transient operation modes of multi-motor asynchronous electric drives in the Matlab application package. Multi-motor asynchronous electric drives with adjustable supply voltages, as well as with preliminary synchronization and synchronous braking, have been developed. Compilation of a program for the stability of a nonlinear system of a multi-motor asynchronous electric drive (MAEDs) with a thyristor voltage converter (TVC) in Matlab. Also, the modes of soft start, load shedding and surge on the motor shaft are simulated, confirming the stability of the system.

Hypertension is a global public health challenge, with a high prevalence across various regions and significant implications for cardiovascular risk. This article reviews the effectiveness of herbal medicine as a potential therapeutic approach for hypertension, offering an alternative or complementary solution to conventional pharmacological treatments. It highlights several natural agents that have demonstrated efficacy in lowering systolic blood pressure (SBP) in clinical and meta-analytical studies. The methodology involved a systematic review of articles that discuss herbal therapeutics for hypertension, focusing on their efficacy compared to placebo and standard treatments. The findings suggest that certain nutraceuticals, such as garlic, hawthorn, and CoQ10, can significantly reduce SBP, presenting a viable option for managing hypertension. This review underscores the need for further research to validate these findings and optimize herbal treatment strategies, potentially expanding the use of these natural products in clinical practice. The article aims to increase awareness among medical professionals and patients about the benefits and applications of herbal medicines in treating hypertension.

This paper analyzes and compares models for predicting average magnet losses in interior permanent-magnet motors with fractional-slot concentrated windings due to harmonics in the armature reaction (assuming sinusoidal phase currents). Particularly, loss models adopting different formulations and solutions to the Helmholtz equation to solve for the eddy currents are compared to a simpler model relying on an assumed eddy-current distribution. Boundaries in terms of magnet dimensions and angular frequency are identified (numerically and using an identified approximate analytical expression) to aid the machine designer whether the more simple loss model is applicable or not. The assumption of a uniform flux-density variation (used in the loss models) is also investigated for the case of V-shaped and straight interior permanent magnets. Finally, predicted volumetric loss densities are exemplified for combinations of slot and pole numbers common in automotive applications.

The aging populations observed across numerous countries worldwide necessitate a thorough exploration of interventions aimed at promoting healthy aging. As individuals age, they undergo significant physiological changes that impact their functional capacity and often necessitate increased reliance on external support systems. Enhancing the autonomy and well-being of elderly individuals emerges as a critical imperative, serving not only individual interests but also broader societal goals. This review investigates various interventions designed to optimize the health and independence of aging populations, offering insights into effective strategies for promoting healthy aging and mitigating the societal burdens associated with an aging demographic.

Through the geometric relationships and force analysis of the main components of the panto-graph on high-speed trains, coefficients of aerodynamic forces and lift transmission between the pantograph and main components under crosswind conditions were derived. Based on the aer-odynamic forces acting on the pantograph at different crosswind speeds, wind angles, and oper-ating speeds, the aerodynamic lift of the pantograph and main components was ultimately de-termined. The results indicate that the aerodynamic lift of the pantograph is mainly distributed on the bow structure, with the aerodynamic lift of the upper frame all being negative values, while the absolute value of the aerodynamic lift of the lower arm rod is the smallest. The oper-ating speed of the pantograph and the wind angle of the crosswind have a significant impact on the aerodynamic lift of the main components, while the impact of the crosswind speed is rela-tively small. At the same operating speed of the pantograph, the lower the corresponding crosswind speed, the smaller the aerodynamic lift of the pantograph. The aerodynamic lift of the pantograph tends to decrease gradually with the increase of crosswind speed, and the impact of crosswind speed decreases gradually with the increase of pantograph operating speed. A com-prehensive relationship formula between the aerodynamic lift of the pantograph and the oper-ating speed, crosswind speed, and wind angle is obtained, and the empirical formula for the contact force of the bow net and train operating speed is modified. The research results are of great significance and value for the study and application of lift forces on pantographs under crosswind conditions.

This paper proposes a non-extensive entropy econometric technique to predict energy efficiency at province (NUT-2) level based on imperfect knowledge of the national overall efficiency in the sectors of industry, transport, households and services. The model is applied to the polish case. As acknowledged in recent literature, non-extensive entropy model should remain a valuable device for econometric modelling even in the case of low frequency series since outputs provided by the Gibbs-Shannon entropy approach correspond to the Tsallis entropy limiting case of the Gaussian law when the Tsallis q-parameter converges to unity. Therefore, we set up a q-Tsallis-Kullback-Leibler entropy criterion function with a priori consistency moment and model data constraints, including province energy intensity (known with uncertainty), regional climate differentiation and regular conditions. The model outputs continue to conform to empirical expectations. In spite of the close to unity q-Tsallis parameter, this Tsallis related approach reflects higher stability for parameter computation in comparison with the Shannon-Gibbs entropy econometrics technique. The proposed technique can be applied in different EU countries and elsewhere for example in the context of experimental official statistics.

Antidepressants are among the most used medications in the US, with significant deleterious effects on people’s well-being. At any given time, depression impacts approximately 1 in 10 Americans, causing wide and broad societal costs. Interest is developing for non-pharmacological treatments and preventative measures. We summarize the literature on non-invasive dietary and lifestyle approaches for treating depression, including recent work with the psychedelic treatment of depression. This review aims to inform future research and treatment programs for depression. This review provides an evidentiary summary of integrative therapeutic approaches for depression.

This article presents the implementation of a model to estimate the future price of commodities in the Brazilian market from time series of short-term technical evaluation. For this, data from two databases were used, one referring to the foreign market (opening values, maximum, minimum, closing, closing adjustment and volume) and the other, from the Brazilian market (the price of the day), considering commodities, sugar, cotton, corn, soybean and wheat. Subsequently, the technical indicators were calculated from the TA-Lib technical analysis library. Pearson’s correlation coefficient was applied, records with low correlation were removed, and then the database was consolidated. From the pre-processed data, Long Short-Term Memory (LSTM) recurrent neural networks were used to perform data prediction at the one and three day interval. These models were evaluated using the mean square error (MSE), obtaining results between 0.00010 and 0.00037 on test data one day ahead, and from 0.00017 to 0.00042 three days ahead. However, based on the results obtained, it was observed that the developed model obtained a promising forecasting performance for all the commodities evaluated. As a main contribution, there is the consolidation of databases that can be used in future scientific research. Furthermore, based on its interpretation, it can assist in decision making regarding the buying and selling of commodities to increase financial gains.

On the 9th March 2020, the first patient with COVID-19 was admitted to ICU in the Royal Gwent Hospital, Newport, Wales. We prospectively recorded the rate of ICU admissions of 52 patients with COVID-19 over 60 days, focusing on the epidemiology of ethnicity and deprivation. Patients were 65% (34 of 52) male and had a median (IQR) age of 55 (48-62) years. Prevalent comorbidities included obesity (52%); diabetes (33%), and asthma (23%). COVID-19 hospital and ICU inpatient numbers peaked on days 23 and 39, respectively – a lag of 16 days. The ICU mortality rate was 33% (17 of 52). Black, Asian and Minority Ethnics (BAME) population represented 35% of ICU COVID-19 admissions (18 of 52) and 35% of deaths (6 of 17). Within the BAME group, 72% (13 of 18) were found to reside in geographical areas representing the 20% most deprived in Wales, versus 27% of Caucasians (9 of 33). Less than 5% of the population within the hospital catchment area are of BAME descent, yet they represent a disproportionately high proportion of patients with ICU admission and mortality suffering from COVID-19. The interplay between ethnicity and deprivation, which is complex, may be a factor in our findings. This in turn could be related to an increased prevalence of co-morbidities; higher community exposure; or genetic polymorphisms.

In order to establish the formation patterns of the Co–Mg oxide system, samples with different Co:Mg ratios and heat treatment temperatures were synthesized and studied. Study of the sam-ples confirmed the phase transition of MgxCo2–xO4 spinels into corresponding solid solutions at 800–900 °C. The similarity of formation patterns for different compositions is shown. The rock-salt oxide in low-temperature samples is an anion-modified paracrystalline phase that forms a “true” solid solution only upon spinel decomposition. TPR profiles of decomposed Co3O4 spinel show surface Co3O4 peaks and a wide peak corresponding to well-crystallized CoO, while par-tial Co3O4 TPR up to 380 °C results in dispersed and amorphous CoO. High-temperature non-stoichiometric samples are poorly reduced, indicating their low oxygen reactivity. Spinel reoxidation after heat treatment to 1100 °C by calcination at 750 °C showed complete regenera-tion for MgCo2O4–Co3O4 samples and its absence in case of an excess of MgO relative to stoi-chiometry. Based on the data obtained, it can be concluded that the processes governing the formation of Co–Mg oxide systems are determined by both Co:Mg ratio and the heat treatment conditions, potentially providing the possibility of fine tuning for specific catalytic processes.

The new unique technology for granulation of metals and nonmetallic melts is presented in the paper. It was created on the newly developed controlled film flow disintegration with rapid cooling of the droplets and solidified granules in amorphous state. Three new phenomena discovered by us created the base for 3 different methods for granulation of metals and nonmetallic melts in a wide range of granules’ sizes. Electromagnetic resonance method allows producing granules of metals in the range of 1 mm and over. The soliton-like vibrational regime is available for production of any granulation material in the range 0.1-1 mm. Moreover, the shockwave regime is applicable for producing particles from 10 micrometers by size. All methods produce particles of the stated size with a narrow distribution by size: deviation from the average size no more than 50%. The other known methods do not produce granules with such high cooling rate, which can realize the amorphous state and cannot regulate size of particles in such bright but narrow range from 10 micrometers to 1-2 mm.

Modern building automation systems implement plenty of advanced control and monitoring functions considering various parameters like users’ activity, lighting, temperature changes etc. Moreover, new solutions based on Internet of Things and cloud services are also being developed for smart buildings to ensure comfort of use, user safety, energy efficiency improvements and integration with smart grids and smart city platforms. Such a wide spectrum of technologies and functions requires a new approach in building automation systems design to provide effective way of their implementation and flexibility during operation. At the same time, in the building design and operation industries, tools based on building information modeling and digital twins are being developed. In this paper, the authors discuss development directions and application areas of these solutions, identifying new trends and possibilities of their use in smart homes and buildings. In particular, the focus is on procedures for selecting automation functions, effective integration, and interoperability of building management systems with Internet of Things considering organization of prediction mechanisms and dynamic functional changes in buildings and smart networks. Chosen solutions and functions should consider the requirements from EN ISO 52120 standard and the guidelines defined for the Smart Readiness Indicator.

The COVID-19 pandemic has underscored the intricate interplay between viral infections and opportunistic bacterial pathogens such as Klebsiella pneumoniae. K. pneumoniae harbors various antibiotic resistance determinants like extended-spectrum and plasmid-mediated AmpC β-lactamases and carbapenemases. In the two years following the pandemic, carbapenemase producing K. pneumoniae isolates obtained routinely in outpatient and inpatient setting demonstrated similar resistance patterns which prompted research. The aim was to compare and subsequently analyze carbapenem-resistant hospital and outpatient’s K. pneumoniae isolates’ resistance mechanisms, traits and molecular epidemiology, following the COVID-19 pandemic. Disk diffusion and broth dilution method were the methods of choice to determine antibiotic susceptibility. β-lactamases were screened by phenotypic methods and confirmed with PCR. In total 113 isolates were analysed. Resistance to amoxicillin-clavulanate and ertapenem was confirmed in all strains. High resistance rates (over 90%) were observed for extended-spectrum cephalosporins, and ciprofloxacin. OKNV testing and PCR detected OXA-48 in 106, NDM in 7 and KPC in only one isolate. ESBLs accompanied carbapenemases in 103 isolates. Carbapenem resistance in K. pneumoniae is becoming a global problem, hence careful monitoring of its resistance traits is of utmost importance in order to combat the arising threat. OXA-48 seems to continue predominating in the turbulent period after pandemic.

Building a new-type power system is the key core of the green and low-carbon development of energy, the restructuring of the power system will inevitably have a linked impact on the coordinated development of the economy-energy-environment (3E) system. This paper constructs a "Dual-Triangle" theoretical framework consisting of the “Energy Trilemma” and the "Sustainable Development Triangle", by combining historical statistical analysis with scenario predictive analysis, analyzes the historical characteristics of the "Dual Triangle" and future development trends under different scenarios, and studies the coupled interaction relationship of the "Dual-Triangle" to explore the optimal transformation path of the power system that is most beneficial to the coordinated development of the 3E system. The conclusions are as follows: (1) The energy system gradually inclined towards economy and cleanliness from 2010 to 2022, the level of coordinated development of the 3E system fluctuated upwards, and the operation status of the "Dual Triangle" was stable. (2) Positive coupling relationship between "Dual Triangle" of scenario S1 is close, which can be regarded as the preferred path for the reconstruction of the power system. Due to phased development has clear development priorities, scenario S2 will artificially break the balance of the “Energy Trilemma”, which is a development model that dynamically mitigates the challenges of the “Energy Trilemma”.(3)The contradiction between economy and cleanliness is continuously weakened, and security has become the core contradiction of the "Impossible Triangle". The combination of renewable energy and energy storage is the key to resolving this contradiction. This paper conducts an integrated and innovative application of the "Dual-Triangle" theory, and the results provide a case basis for how to achieve the coupled interaction of the "Dual-Triangle", promote high-quality energy development, and support the sustainable development of the economy and society.

Demand for environmentally friendly types of energy is growing all over the world, which naturally increases the intensity of work on the production of hydrogen-containing fuel mixtures. Steam reforming of methanol is one of the most effective areas of research, as it is a process with low energy consumption. The results of steam reforming of methanol on the catalysts prepared by solution combustion synthesis (SCS) and impregnation by moisture capacity are presented. Investigation of the activity of Cu-Ce-Al catalysts of different composition was carried out for production of hydrogen and comparison of SCS with traditional impregnation method. Methanol conversion reaches 99%, while the selectivity of H2 was 88%, at 500 °C. It was found that CuAl2O4 spinel formation is due to substitution of Al3+ with Cu2+ Ce3+ cations. A consequence CuAl2O4 and CeAlO3 lattice parameters increase because of difference in ionic radius of Al3+ (0.53 Å) and Cu2+ (0.73 Å), Ce3+ (1.07 Å). Advantages of SCS catalysts in steam reforming of methanol were shown. The aim of this research is to develop a new catalyst for conversion of methanol into hydrogen containing fuel mixtures, which will further promote the organization of a new era of environmentally friendly energy-saving production methods.

The growing use of proton-exchange membrane fuel cells (PEMFC) in hybrid propulsion systems, aimed at replacing traditional internal combustion engines and reducing greenhouse gas emis-sions. Effective power distribution between the fuel cell and the energy storage system (ESS) is crucial, which has led to a growing emphasis on developing energy management systems (EMS) to efficiently implement this integration. To address this goal, this study examines the performance of a fuzzy logic rule-based strategy for a hybrid fuel cell propulsion system in a small hydro-gen-powered passenger vessel. The primary objective is to optimize fuel efficiency, with particular attention to reducing hydrogen consumption. The analysis is carried out under typical operating conditions encountered during a river trip. Comparisons between the proposed strategy with other approaches —control-based, optimization-based and deterministic rule-based— are con-ducted to verify the effectiveness of the proposed strategy. Simulation results indicated that EMS based on fuzzy logic mechanisms was the most successful in reducing fuel consumption. The superior performance of this method stems from its ability to adaptively manage power distri-bution between the fuel cell and energy storage systems.

The hump feature is one of the major instabilities in pump-turbines. When pump-turbines operate in the hump region, strong noise and serious fluctuations can be observed, which are harmful to their safe and stable operation and can even destroy the whole unit as well as water conveyance system. In this paper, a low specific speed (n_q = 36.1 min⁻¹) pump-turbine model was experimentally investigated. Firstly, the hump characteristic was obtained under 19 mm guide vane opening conditions. More interestingly, when the hump characteristic was measured in two directions (increasing and decreasing the discharge), characteristic hysteresis was found in the hump region. The analysis of performance characteristics reveals that the hump instability is the result of Euler momentum and hydraulic losses, and different Euler momentum and hydraulic losses in the two development processes lead to the hysteresis phenomenon. Then, 12 pressure sensors were mounted in the different parts of the pump-turbine model to obtain the time and frequency characteristics. The analysis of the corresponding fast Fourier transform confirms that the hump characteristic is related to low-frequency (0.04–0.15 times rotational frequency) vortices. The occurrence and cessation of vortices depend on the operating condition and measurement direction, which contribute to the hysteresis feature. Finally, the type of the low-frequency vortices was analyzed through the cross power spectrum.

Predicting electricity prices is a very important issue in modern society, because the associated decision process under uncertainty requires accurate forecasts for the economic agents involved. In this paper, we apply the decision tree extension of Random Forests to the prediction of electricity prices in Spain, but with the novelty of modeling prices jointly with demand, with the purpose of achieving greater accuracy than with univariate response Random Forests, particularly in price prediction, as well as understanding the effect of the input variables (lagged values of price and demand, current production levels of available energy sources) on the joint of the two outputs. The results are very encouraging, providing significant increase in price prediction accuracy. Also, interesting methodological challenges appear as far as the appropriate choice of the relative weights of price and demand in the joint modeling is concerned and a new procedure to provide the importance variable ranking is proposed. The partykit (package of R software) library allowing for multivariate Random Forests has been used.

The volatility and uncertainty associated with the high proportion of wind and PV output in the new power system significantly impact power and energy balance, making it challenging to accurately assess the risks related to renewable energy abandonment and supply guarante. Therefore, a probabilistic power and energy balance risk analysis method based on distributed robust optimization is proposed. Firstly, the affine factor and the flexible ramp reserve capacity of thermal power are combined to establish a probabilistic index, which serves to characterize the risk associated with power and energy balance. Drawing upon the principles of conditional value at risk theory, the risk indexes of load shedding power and curtailment power under a certain confidence probability are proposed. Secondly, the probability distribution fuzzy sets of uncertain variables are constructed using the distributionally robust method to measure the Wasserstein distance between different probability distributions. Finally, aiming at minimizing the operation cost of thermal power, the risk cost of power abandonment and the risk cost of load shedding, a distributed robust optimal scheduling model based on flexible ramp reserve of thermal power is established.

The period of the COVID-19 pandemic resulted in a rapid development of innovative education methods, in particular using e-learning and remote work tools. The effects of this development are also post-pandemic changes in formal teaching regulations, in particular in higher education, allowing classes and lectures to be carried out with Blended Learning or Flipped Classroom methods. This paper provides information about a case study of implementing ICT technologies with elements of the mentioned methods in one of the subjects at a technical university. The implemented tools and solutions in the field of e-learning and interactivity are presented, along with information regarding their perception by students during two academic years in the post-COVID-19 period. The analysis of results of these information and student evaluations indicates their generally positive approach to such innovations in the educational path, and at the same time shows significant challenges for teachers to increase the attractiveness and effectiveness of the teaching process and the development of practical, technical skills of students.

Background and Objectives: Most individuals infected by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) are asymptomatic or have mild symptoms of COVID-19, which usually resolve after few days. Regardless of symptoms, infected people can transmit the virus to others especially on the first days of infection. Quantitative reverse transcription-polymerase chain reaction (RT-qPCR) is used to confirm SARS-CoV-2 infection; some individuals show persistent PCR-positivity after recovering from COVID-19. In this study, 12 individuals who showed persistence of COVID-19 symptoms and of SARS-CoV-2 PCR-positivity were followed-up. Methods: nasopharyngeal samples were collected for SARS-CoV-2 detection by RT-qPCR; clinical and epidemiological data were analyzed. Results: that persistence of SARS-CoV-2 PCR positivity was associated with duration of symptoms (r_s 0.81338), which varied between one and 49 days, with 75% of the individuals reporting symptoms for more than two weeks; 83.33% of cases remained positive after two weeks of onset of symptoms, despite decreases in viral load. Conclusion: neither RT-qPCR test nor a symptom-based approach alone are sufficient to evaluate discontinuation of patient isolation; other factors such as viral loads and symptom severity should also be considered. Additional studies are needed to understand how RT-PCR-positivity is related to symptoms and the risk of viral transmission, and to better support isolation guidelines.

(1) Background: The interplay between coronavirus disease 2019 (COVID-19) and laryngeal cancer represents a substantial challenge for both patients and healthcare. To garner information on recent mortality data for laryngeal cancer, including during the COVID-19 pandemic, we analyzed real-world data from the US Centers for Disease Control and Prevention (CDC). (2) Methods: We searched the CDC WONDER on-line database 2018-2022 using with the ICD-10 code for laryngeal cancer (C32; malignant neoplasm of larynx). We also performed a sub-analysis between genders, and across ten-year age groups. Data were analyzed with one-way analysis of variance (ANOVA) and Tukey post-hoc test. (3) Results: The trend of age-adjusted mortality ×100,000 did not change significantly between 2018-2022 (p=0.553). Males had higher age-adjusted mortality rates (M/F ratios between 4.6 and 5.0), but no significant variation was found in both genders (males: p=0.676; females: p=0.596). Although the mortality rate remained unchanged in people aged 35-84 years, the variation reached statistical significance in those aged 85 or older (p=0.004), displaying significant increase in 2021 compared to 2018 (p=0.006) and 2019 (p=0.039). (4) Conclusions: The impact of the COVID-19 pandemic on mortality for laryngeal cancer seemed to be relatively modest in the general US population. Nevertheless, closer attention must be paid to older people, in whom the unfavorable consequences of misdiagnosis or mistreating can be exacerbated.

The Covid-19 pandemic was a challenge for the whole world and it had major secondary effects on humans and environmental health. The viral infection induced, in many situations, secondary bacterial infections, especially enteric infections by destabilizing the balance of the gastrointestinal microbiota. The large-scale use of antibiotics and biocides both for curative and preventive purposes has determined an increase in bacterial resistance and at the same time the possibility of pathogenic microorganisms’ multiplication and their dissemination to natural environments. Wastewater is the main vector of faecal microorganisms that favour their dissemination into natural aquatic ecosystems. The present paper aimed to analyze the effect of Covid-19 pandemic on the microbiological quality of wastewater from sewage treatment plants in Romania and its impact on receiving rivers. In order to highlight different and important areas of Romania, 3 cities from the east, center and west were selected for a microbiological evaluation of their WWTPs influent and effluent between ante-Covid-19 and Covid-19 pandemic peak period, when the Covid-19 pandemic had a direct impact on WWTPs microbial composition. Our study showed a higher contamination with fecal bacteria linked to a higher Covid-19 incidence. The increased usage of pharmaceutical compounds, at their turn, increased the number of resistant bacteria reaching the environment via WWTP effluents.

Civic participation is of great significance to urban management decision-making. In order to facilitate citizens to participate in city management decision-making, this paper proposes a large-scale group decision-making (LSGDM) method based on multi-granular probabilistic linguistic preference relations (MG-PLPRs). First, each decision maker selects a language terms set from the multi-granularity language terms set to represent individual preference relations and the MG-PLPRs are obtained by statistical calculation to represent sub-group’s preferences information. Then, an optimization model based on the expected consistency of PLPR and consensus measure of groups is established to achieving consensus reaching processes, which can ensure satisfactory individual consistency and group consensus. Finally, the validity and applicability of the proposed method is verified by a case of a city "shared garden" site selection with the participation of citizens.

The Saudi government has undertaken rapid and swift actions, such as suspending Omrah and holding international flights. Such affirmative actions enhanced citizens and residents’ confidence in the government officials’ ability to fight the pandemic. However, there are more than 361,178 reported cases of Covid-19 with 6131 deaths as of December 22, 202. As nurses are the largest component of the health care workforce in Saudi Arabia, it is important that they are trained and have the skills and resources to adapt, whether on the frontline of a crisis or in a clinical environment. Nurses play a key function in fulfilling the needs of medical treatment by being the most important part of the health care delivery system.

The main aim of this article is to examine the inter-relationships among the top cryptocurrencies on the crypto stock market in the presence and absence of the COVID-19 pandemic. The nine chosen cryptocurrencies are Bitcoin, Ethereum, Ripple, Litecoin, Eos, BitcoinCash, Binance, Stellar, and Tron and their daily closing price data are captured from coinmarketcap over the period from 9/13/2017 to 9/21/2020. To determine the order of integration, the Augmented Dickey-Fuller (ADF), Phillips-Perron (PP), and Kwiatkowski, Phillips, Schmidt, and Shin (KPSS) unit root tests were carried out, and all of the cryptocurrencies were found to be integrated of order 1 i.e. I(1). It has been found that there is strong evidence of a long-run relationship between Bitcoin and altcoins irrespective of whether it is pre-pandemic or pandemic period. Hence these cryptocurrencies' prices and their inter-relationship are resilient to the pandemic.

Abstract: Background: Stigma in health can result in a broad range of vulnerabilities and risk for patients and healthcare providers. The media plays a role in people’s understanding of health and stigma is socially constructed through many communication channels including via media framing. Among health issues that were affected by stigma recently were the Monkeypox and Covid-19. Objectives: This research aims to examine how The Washington Post framed stigma around mon-keypox and COVID-19. Guided by the framing theory and stigma theory, online news coverage for monkeypox and COVID-19 were analyzed to understand the construction of social stigma through the media reporting. Methods: This research employed a qualitative content analysis to compare news framing in The Washington Post online news regarding monkeypox and COVID-19. Results: Based on endemic, reassurance, and sexual transmission frames, the The Washington Post predominantly defined Africa as the source of the disease, blames gay communities, and empha-sizes no need to worry about the spread of the monkeypox virus. For the COVID-19 coverage, The Washington Post described China as the source of the coronavirus and constructs the image of panic towards the spread of the virus. Conclusions: The shifts in stigma discourse essentially manifest racism, xenophobia, and sexism in public health. This research affirms that the media reinforces stigma phenomenon in health through framing and offers constructive suggestions for mitigating this issue.

Background: The enduring psychological effects of the COVID-19 pandemic continue to affect individuals long after the immediate health concerns have subsided. This research aims to identify specific groups within the Romanian population who are at a higher risk of experiencing mental health challenges that can interfere with everyday life and may lead to more serious mental health disorders. Methods: Conducted as a cross-sectional survey, this study evaluated the prevalence and intensity of psychological distress using the DASS-21 questionnaire. An online survey distributed via Google Forms also gathered socio-demographic data and COVID-19-specific information. Statistical analyses included the Shapiro-Wilk test, Fisher's exact test, and Z-tests with Bonferroni correction. Quantitative independent variables that lacked a normal distribution were compared between groups using either the Mann-Whitney U test or the Kruskal-Wallis H test. Results: Analysis of 521 questionnaires, filled out by a predominantly middle-aged cohort of 320 women and 201 men, revealed that 63.72% of participants worked outside the healthcare field. Those unemployed or retired reported significantly higher anxiety levels than individuals in other sectors. Moreover, living alone, experiencing the loss of close relatives (6.14%) or friends (33.59%), and undergoing hospitalization or reinfection due to COVID-19 were linked to significantly elevated distress scores. Conclusion. By identifying the segments of the population most vulnerable to psychological distress, as evidenced by higher scores among the unemployed, retirees, individuals living alone, and those directly affected by COVID-19 through personal health or loss, targeted initiatives for psychological screening and therapy can be established. Such measures are essential for enhancing the post-pandemic mental well-being of Romanians, addressing the specific needs uncovered in this study.

This paper describes a system that is used to gather data from Smart Home sensors measuring energy consumption, analyze and predict future consumption by using machine learning algorithm for prediction. It focuses on the architecture of the system as well as the need for such system to exist in practice – why the consumption should be measured at all and how that measurement can be put to good use for achieving energy efficiency.

The interaction between the grid network and the offshore wind power plant (WPP) network can lead to the amplification of certain harmonics and potentially resonant conditions. Offshore WPP should limit the increment of harmonic voltage distortion at the point of connection to the grid network as well as within their internal network. The harmonic distortion should be limited within the planning level limits using harmonic compensation, which is usually achieved by using static filters. In this paper an active damping compensation strategy with a STATCOM using emulation of resistance at the harmonic frequencies of concern is analysed. Such a compensation is effective for the local bus, though the performance is not guaranteed at the remote bus. This paper investigates the challenges associated with remote harmonic compensation in the offshore WPP, which is connected to the onshore grid through long high-voltage cables and transformers. First, the harmonic distortion and the compensating effects of the filter are theoretically assessed. Afterwards, they are demonstrated using harmonic propagation studies and time domain simulations in PSCAD.

Disadvantaged groups around the world have suffered and endured higher mortality during the current COVID-19 pandemic. This contrast disparity suggests that socioeconomic and health-related factors may drive inequality in disease outcome. To identify these factors correlated with COVID-19 outcome, country aggregate data provided by the Lancet COVID-19 Commission subjected to correlation analysis. Socioeconomic and health-related variables were used to predict mortality in the top 5 most affected countries using ridge regression and extreme gradient boosting (XGBoost) models. Our data reveal that predictors related to demographics and social disadvantage correlate with COVID-19 mortality per million and that XGBoost performed better than ridge regression. Taken together, our findings suggest that the health consequence of the current pandemic is not just confined to indiscriminate impact of a viral infection but that these preventable effects are amplified based on pre-existing health and socioeconomic inequalities.

The Coronavirus disease 2019 (COVID-19) pandemic is clearly taking a firmer grip on South Africa and more podiatrists will face the potential transmission of SARS-CoV-2. Government response was swift with the implementation of a travel ban, strict national lockdown as well as social distancing and hygiene protocols in line with international health regulations. Co-morbidities such as tuberculosis and HIV/AIDS, endemic to South Africa, are considered a dangerous combination with COVID-19, making many South Africans vulnerable to contracting the COVID-19. Patients with diabetes as well as the aged are vulnerable, both in terms of potential combined complications and challenges in continuity in foot care. The demands of the pandemic may outstrip the ability of the health systems to cope. Should this time arrive, all healthcare practitioners, including podiatrists, would have to step in and take on a role beyond their scope of practice in order to ensure that the healthcare system does not get overwhelmed. It is important for podiatrists to keep abreast with the developments around the COVID-19, in order that they may institute appropriate clinical practice which will ensure maximum protection for themselves, staff and patients as well as providing quality foot health care.

The world is currently experiencing COVID-19, one of the worst pandemics that have happened in this century, affecting 10.7 million people worldwide. It has caused massive growth in the number of employees working from home. However, employees have minimal cybersecurity resources unlike organizations with security teams protecting them against attacks. Hence, cybersecurity plays an important role as users can be easily targeted by cybercriminals. This paper examines how cyberattacks have increased during this pandemic and shows how greatly they have affected health organizations, individuals and social networking applications. Results of the attacks include data breaches, false announcements and operations being disrupted. Attacks occurring during this pandemic and how they were handled are also critically discussed. The existing contributions do touch on related attacks but do not provide in-depth solutions regarding the issues. Even though there are many works and findings that were done previously, technology is ever evolving. Therefore, we need to be well versed with current and future issues and provide the latest mechanisms to prevent cybersecurity threats from occurring. On our share, we intend to present our findings on the challenges being faced by the population and its increasing threats as well as presenting unique solutions that can help organizations or related persons understand or spread awareness on the importance of cybersecurity. Through the research performed in this paper, it is found that there are many ways these issues can be alleviated. However, the issue is that there is significant lack of action and investment in terms of actual implementation and application of the available solutions.

The outbreak of a novel coronavirus (SARS-CoV2) associated with acute respiratory disease called COVID-19 marked the introduction of the third spillover of an animal CoV to humans in the last 2 decades. The SARS-CoV2 genome analysis with various bioinformatics tools revealed that it belongs to beta CoVs genera, with highly similar genome as bat coronavirus and receptor binding domain (RBD) of spike glycoprotein as Malayan pangolin coronavirus. Based on its genetic proximity, SARS-CoV2 is likely to be originated from bat derived CoV and transmitted to humans via an unknown intermediate mammalian host, probably Malayan pangolin. Further spike protein S1/S2 cleavage site of SARS-CoV2 has acquired polybasic furin cleavage site which is absent in bat and pangolin suggesting natural selection either in an animal host before zoonotic transfer or in humans following zoonotic transfer. In the current review, we recapitulate a preliminary opinion about the disease, origin and life cycle of SARS-CoV2, roles of virus proteins in pathogenesis, commonalities and differences between different corona viruses. We have also highlighted the evidences regarding the potential drugs and vaccine candidates with their modes of action to cope with this viral outbreak. Our review provides comprehensive up-dated information on molecular aspects of the SARS-CoV2.

The relentless challenges posed by the COVID-19 pandemic have placed immense pressure on densely populated regions, such as Hong Kong, particularly in the context of an aging population. The burgeoning demand for healthcare services has necessitated the optimization of resource al-location within healthcare systems. This research presents an innovative analytical queueing model specifically tailored to address the intricate gridlock dynamics prevalent in healthcare systems, with a focused application in the challenging landscape of COVID-19 management. Hong Kong, like numerous other regions, has experienced a demo-graphic transition leading to heightened healthcare demands. Traditional methodologies for scrutinizing gridlock issues in healthcare settings, including simulation models, often prove suboptimal within the context of sophisticated optimization frameworks. This study, however, delves into analytical queueing models, offering a more efficient and effective approach. These models have been underexplored, primarily due to the intricacies involved in modeling gridlock propagation within restricted capacity, a critical concern magnified by the COVID-19 pandemic. The novel Queueing Model introduced in this research incorporates the maintenance of queue capacities and topological aspects as exogenous parameters, rendering it exceptionally adaptable for diverse gridlock-related applications. This adaptability is especially pertinent to healthcare management during the COVID-19 crisis. The model meticulously integrates the concept of gridlock, furnishing a comprehensive comprehension of its origins and repercussions. Validation of this model involves rigorous comparison with established methodologies, exact results, and simulation data, consistently high-lighting its versatility and precision. By applying the model to healthcare management, we scrutinize the dynamics of patient flow within a Hong Kong hospital, placing specific emphasis on the critical issue of bed blockage, further exacerbated by the COVID-19 pandemic. The model's gridlock decomposition unearths the nuanced impact of bed blockage on distinct hospital units, addressing the imperative requirement for quantifying in-patient bed blockage within healthcare systems during a pandemic.

Objectives: Aim to assess the perceptions of virtual learning among dental residents and faculty and employ Regulatory Focus Theory (RFT) to understand the impact of motivational orientations on virtual learning during COVID pandemic. Methods: 46 dental residents and 10 faculty in Upstate New York participated in the study (June -August 2021). Questionnaires were used to collect demographics, perceptions of virtual learning, burnout, and RFT types (promotion and prevention focus). Multiple regression analyses were used to examine factors associated with perceptions of virtual learning and burnout. Results: Overall, 70% of residents and 44% of faculty found virtual learning effective. Younger residents with less experience preferred virtual learning more than their older, experienced peers. Residents trained outside the U.S. and Canada favored in-person learning more than those trained within. Furthermore, residents with a higher promotion focus score found virtual learning more interactive for didactic courses. Additionally, 52% of residents experienced burnout, with a higher incidence among females (p=0.044). Conclusions: Virtual learning is well-received by dental residents and faculty, with potential for continued use post-pandemic. Future efforts should focus on creating an inclusive and supportive educational environment that meets the motivational and well-being needs of dental residents and faculty.

We revisit a 2023 JAMA-published analysis of data from patients admitted for either COVID-19 or influenza to U.S. Veterans Administration (VA) hospitals in the fall/winter of 2022-2023. We note that baseline characteristics between the cohorts were similar, and the difference in vaccination rates was minimal, even after propensity score weighting. Had the vaccines been even minimally effective, significant differences in vaccination percentages would be expected. These findings call into question any efficacy claims associated with either the COVID-19 or influenza vaccines. Furthermore, the lack of efficacy of the influenza vaccines in reducing hospitalization is consistent with an earlier detailed study that found the same lack of efficacy, further validating the current result. This suggests that comparing vaccination rates between those hospitalized for different vaccine-preventable diseases can serve as a practical method for validating the vaccine efficacy claims of different vaccines.

A better understanding of high temperature processes in slags contributes to facilitate knowledge based design of the solidified product. Here, a slag analogue with a nominal composition of 17 wt% LiMnO2 and 83 wt% Ca2SiO4 was synthesized encountering fairly high cooling rates. The Mn species from 1223 K to 1773 K was simulated using a thermodynamic model assuming a homogeneous melt. The micro-composition including the Mn species of the solidified slag was determined experimentally and was used as basis for molecular dynamics (MD) simulation. The MD simulation provides information on structure and viscosity at high temperatures, otherwise difficult to access. These parameters significantly influence oxidation state of redox-active elements and the solidified product. The micro-composition analyzed by electron probe micro analysis (EPMA) and synchrotron based micro-X-ray fluorescence (micro-XRF) showed that Mn-rich and Ca-Si-rich phases are separated. While the Mn-O phases did not contain noticeable Ca, the Ca2SiO4 phase had incorporated 0.6 wt% of Mn. The slag solidified into round shaped and droplet shaped grains of a Li-Mn-oxide, some Mn3O4 and Ca2SiO4. The powder X-ray diffraction (PXRD) confirmed the formation of larnite, the identity of the Li-Mn-oxide however remained inconclusive. The Mn oxidation state (OS) was identified using synchrotron based micro-X-ray absorption near edge spectroscopy (micro-XANES). The Mn-O grains, matched well with Li-Mn-oxides and a Mn OS: +3 e.g. LiMn3+O2. Small areas matching Hausmannite (Mn2+Mn23+O4) were also identified. The OS of Mn in the silicate phase could not be identified. For comparison a slowly cooled slag analogue with similar composition however higher Si content, was also subjected to micro-XANES. The slowly cooled slag formed long Mn-rich needles in a matrix of large calcium silicate crystals. The Mn-rich crystals matched well with the XANES spectrum of a Mn3+ Li-oxide like LiMn3+O2. At the rim of the needles the Mn-spectra matched well the Hausmannite (Mn2+Mn23+O4) reference. In the silicate phases Mn had a OS: +2, unambiguously. The melt structure at different temperatures of two compositions i.e. LiMn3+O2 and Ca2SiO4 was simulated using molecular dynamics (MD). They serve as model compositions assuming a heterogeneous melt. The results show significant different degrees of polymerization and viscosity. Information from MD simulations can support the identification of potentially different oxygen permeability and with that prediction of oxidation states. The bulk composition was identified by inductively coupled plasma optical emission spectrometry (ICP-OES), bulk structure by PXRD and bulk species by lab-XANES. The synchrotron micro analysis including micro-XRD were performed at the microfocus beamline I18 at the Diamond Light Source. Pure reference compounds were prepared and characterized with the same multi-modal approach.

BackgroundThe novel virus COVID-19, also known as SARS-CoV‑2, is currently rapidly spreading around the globe and pushing healthcare systems to the limits of their capacity. One of the functions of predictive models is to timely act for epidemic preparedness including hospital preparedness. In Egypt, like many other countries in the world, the epidemic situation and forecasting have not yet sufficiently studied. ObjectiveThe study was carried out to develop a short-term forecast scenario for the COVID-19 epidemic situation in Egypt and predict the hospital needs to accommodate the growing number of cases.MethodsSecondary data from the COVID-2019 daily reports and the report issued 8^th of April by the Egyptian Ministry of Health and Population were used. Due to the daily changing level of knowledge and data, the article reflects the status up to 18 April 2020. The prediction was based on the exponential growth rate model. For the depiction of the situation, the full length of the epidemic timeline was analyzed (from February 14^th till April 18^th). The growth rates and their rates of decline during the period from the 22^nd of March till the 18^th of April were calculated and extrapolated in the coming 7 weeks. The predicted hospital needs were assessed against the announced allocated resources.ResultsThe epidemic curve in Egypt is on the ascending arm as of April, 18. The active cases showed exponential growth from the start of the epidemic till April, 18. At the end of this period time, the recovery rate was 23.12% and the case fatality rate (CFR) was7.39. The case fatality rate median level during the last four weeks was 6.64. The active cases are expected to reach more than 20,000 by late May then starts to decline. The allocated regular hospital beds are predicted to show shortage by the time of the release of the paper. The intensive care units (ICU) beds and ventilators are predicted to show insufficiency on May 6.Conclusions: The COVID-19 epidemic in Egypt is expected to continue on the rise for the next few weeks and expected to start to decline late in May, 2020. Our estimates should be useful in preparedness planning. Serious actions should be taken to provide ICU beds and ventilators enough for the predicted number of cases that would need them, not later than the end of April. Mitigation actions have to continue for the coming 6 weeks or until the epidemic situation is more clearly seen.

We describe a forecast system based on the Weather Research and Forecasting (WRF) model for the prediction of high-impact weather events affecting power utilities, particularly conditions conducive to wildfires. The system was developed for Pacific Gas and Electric Corporation (PG&E) to operationally forecast conditions in Northern and Central California. It was established in 2014 and has been periodically improved. In the current configuration, WRF forecasts are routinely performed multiple times each day on a 2-km grid, and the results are used as input to wildfire fuel moisture, fire probability, and wildfire spread models. Components of the system include a stochastically perturbed ensemble; an annually updated reanalysis covering more than 30 years; and validation against PG&E’s extensive mesonet and other observing networks. We describe the development and validation of the next operational edition. Configurations tested include irrigation triggered by crop growing season and an ensemble-based approach with intelligently sub-selected Global Ensemble Forecast System (GEFS) members. The latter approach allows for enhanced uncertainty sampling in WRF forecasts and can greatly improve WRF forecasts when calibrated by observations.

The effects of CO₂-water-rock interactions on the mechanical properties of shale are essential for estimating the possibility of sequestrating CO₂ in shale reservoirs. In this study, uniaxial compressive strength (UCS) tests together with an acoustic emission (AE) system and SEM & EDS analysis were performed to investigate the mechanical properties and microstructural changes of black shales with different saturation times (10 days, 20 days and 30 days) in water dissoluted with sub-/super-critical CO₂. According to the experimental results, the values of UCS, Young’s modulus and brittleness index decrease gradually with increasing saturation time in water with sub-/super-critical CO₂. Compared to intact samples, 30-days’ saturation causes reductions of 56.43% in UCS and 54.21% in Young’s modulus for sub-critical saturated samples, and 66.05% in UCS and 56.32% in Young’s modulus for super-critical saturated samples, respectively. The brittleness index also decreases drastically from 84.3% for intact samples to 50.9% for samples saturated in water with sub-critical CO₂, to 47.9% for samples saturated in water with super-critical carbon dioxide (SC-CO₂). SC-CO₂ causes a greater reduction of shale’s mechanical properties. The crack propagation results obtained from the AE system show that longer saturation time produces higher peak cumulative AE energy. SEM images show that many pores occur when shale samples are saturated in water with sub-/super-critical CO₂. The EDS results show that CO₂-water-rock interactions increase the percentages of C and Fe and decrease the percentages of Al and K on the surface of saturated samples when compared to intact samples.

A major challenge for the dissemination, replication, and reuse of epidemiological forecasting studies during COVID-19 pandemics is the lack of clear guidelines and platforms to exchange models in a Findable, Accessible, Interoperable, and Reusable (FAIR) manner, facilitating reproducibility of research outcomes. During the beginning of pandemics, models were developed in diverse tools that were not interoperable, opaque without traceability and semantics, and scattered across various platforms - making them hard to locate, infer and reuse. In this work, we demonstrate that implementing the standards developed by the systems biology community to encode and share COVID-19 epidemiological models can serve as a roadmap to implement models as a tool in medical informatics, in general. As a proof-of-concept, we encoded and shared 24 epidemiological models using the standard format for model exchange in systems biology, annotated them with cross-references to data resources, packed up all associated files in COMBINE archives for easy sharing, and finally, disseminated the models through BioModels repository to significantly enhance their reproducibility and repurposing potential. We recommend the use of systems biology standards to encode and share models of epidemic and pandemic forecasts to improve their findability, accessibility, interoperability, reusability, and reproducibility.

Nurses have experienced several psychological and work-related issues during the COVID-19 pandemic including pandemic burnout and job burnout. The aim of the study was to examine the impact of social support and resilience on COVID-19 pandemic burnout and job burnout among nurses. We conducted a cross-sectional study in Greece. Study population included 963 nurses. We measured social support, resilience, COVID-19 pandemic burnout, and job burnout with the Multidimensional Scale of Perceived Social Support, Brief Resilience Scale, COVID-19 burnout scale, and single item burnout measure respectively. Nurses received high levels of social support, while their resilience was moderate. Additionally, nurses experienced moderate levels of COVID-19 burnout and job burnout. Increased social support (adjusted beta = -0.075, 95% CI = -0.125 to -0.024) and increased resilience (adjusted beta = -0.399, 95% CI = -0.491 to -0.308) were associated with reduced COVID-19 pandemic burnout. We found a negative relationship between social support and job burnout (adjusted beta = -0.263, 95% CI = -0.405 to -0.121). A similar negative relationship was found between resilience and job burnout (adjusted beta = -0.529, 95% CI = -0.785 to -0.272). Social support and resilience can act as protective factors against COVID-19 pandemic burnout and job burnout among nurses. Policy makers should develop and implement appropriate strategies to improve nurses’ social support and resilience since they are the backbone of healthcare systems worldwide.

The study investigated the changes that occurred in the Mexican power sector pre-, during, and post-COVID-19 pandemic and its repercussions on energy sustainability goals. The study is based on the variability of the installed capacity, consumption, generation, and demand of the National Electric System (SEN), covering the period from 2017 to 2021. The data were collected from the Development of the National Electric System (PRODESEN), the Ministry of Energy, the National Energy Balance, and the government's official website. The results indicated that in-stalled capacity and generation increased by 22.83% and 27.86%, respectively, despite the pan-demic. This growth was attributed to clean energy, mainly photovoltaic solar and wind sources. Another finding is that the gross domestic product (GDP), consumption, and demand were seri-ously affected by COVID-19. They had a fall of 8.2%, 2.2%, and 4.4%, respectively, which trans-lates into a significant economic lag and a slowdown in energy self-sufficiency and the Mexican Energy Transition (TEM). Moreover, the objective of generating 35% and 40% of electrical ener-gy through clean energy will be achieved by 2031 and 2035, instead of 2021 and 2035, respec-tively.

The model proposed in this study was based on the assumption that the biomass attached to the anode served as biocatalysts for MFC exoelectrogenesis, and this catalytic effect was quantified by the exchange current density of anode. By modifying the Freter model and combining it with the Butler-Volmer equation, this model could adequately describe the processes of electricity generation, substrate utilization, and the suspended and attached biomass concentrations, at both batch and continuous operating modes. MFC performance is affected by the operating variables such as initial substrate concentration, external resistor, influent substrate concentration, and dilution rate, and these variables were revealed to have complex interactions by data simulation. The external power generation and energy efficiency were considered as indices for MFC performance. The simulated results explained that an intermediate initial substrate concentration (about 100 mg/L under this reactor configuration) needed to be chosen to achieve maximum overall energy efficiency from substrate in the batch mode. An external resistor with the value about that of the internal resistance boosted the power generation, and a resistor with several times of that of the internal resistance achieved better overall energy efficiency. At continuous mode, dilution rate significantly impacted the steady-state substrate concentration level (thus substrate removal efficiency and rate), and attached biomass could be fully developed when the influent substrate concentration was equal to or higher than 100 mg/L at any dilution rate of the tested range. Overall, this relatively simple model provided a convenient way for evaluating and optimizing the performance of MFC reactors by regulating operating parameters.

Nucleation is a fundamental and general process at the initial stage of first order phase transition. Although various models based on the classical nucleation theory (CNT) have been proposed to explain the energetics and kinetics of nucleation, detailed understanding on nanoscales are still required. Here we focus on homogeneous bubble nucleation, in which evaluation of the size dependence of bubble free energy is the key issue. We propose application of a formula in stochastic thermodynamics, the Jarzynski’s equality, for data analysis of molecular dynamics (MD) simulation to evaluate the free energy of bubble nucleation. As a test case, we performed a series of MD simulations with Lennard-Jones (LJ) fluid system. By applying an external spherical force field to equilibrated LJ liquid, we evaluated the free energy change during bubble growth as the Jarzynski’s ensemble average of required works. A fairly smooth free energy curve was obtained as a function of bubble radius in metastable liquid of mildly negative pressure conditions.

The state detection of power cable is very important to ensure the reliability of power supply. Traditional sensors are mostly based on electric field detection, the operation is complex, and its efficiency needs to be improved. This paper optimizes the design and development of the magnetic field detection sensor for AC power cables. Firstly, through the establishment of the magnetic field sensor model, it is determined that permalloy is the material of the magnetic core, the optimal aspect ratio of the magnetic core is 20, and the ratio of coil length to core length is 0.3. Secondly, the coil simulation model is established, and it is determined that the optimal number of turns of the coil is 11000 turns, the diameter of the enamelled copper wire is 0.08mm, and the equivalent magnetic field noise of the sensor is 0.06pT. Finally, the amplifying circuit based on negative magnetic flux feedback is designed and the sensor is assembled, and the experimental circuit is built for sensitivity test. the results show that the sensitivity of the magnetic field sensor is 327.6mV/μT. The sensor designed in this paper has the advantages of small size, high sensitivity, easy to carry and high reliability.

The expansion of Open World Video Games (OWVGs) has seen the emergence of multiple new fictional worlds. This type of video game is characterized by total immersion in a world built for the players entertainment. What videogames developers want when players enter an OWVG is that they could feel like if they were open a door to an entirely new world and leave the real world behind. These virtual worlds manifest as a complement, an alternative, or the successor to the physical universe, and in some way continue the philosophical tradition of possible worlds begun by Leibniz. Accustomed to ‘surviving’ in hostile environments, millions of people continued to improve their skills in the midst of the COVID-19 pandemic while locked in their homes. Once the pandemic seems to start to be left behind, the paper analyzes the virtual worlds created by the video games and the relations between the pandemic and these fictional worlds.

The Corona Virus (COVID-19) pandemic situation has posed significant effect on tourism industry. Tourism destinations have embraced emergency health care measures and restrictions imposed on human movement around the world. Beaches and resorts are empty, peoples’ movements are stopped and travelling between territories is strictly controlled. The COVID-19 lockdown around the world has imposed negative impact on the livelihood of people and world economy as well. The present study attempts to find out the scopes for sustainable tourism development in near future from the consequences of social, economic, and environment in COVID-19 pandemic situation.

The outbreak of COVID-19 started in mainland China and has rapidly spread to more than 200 countries and territories around the world (WHO, 2020). The new coronavirus is a respiratory virus and its transmission is known to occur by upper respiratory secretions, including airborne droplets after coughing or sneezing. There is no evidence to support the role of food in the transmission of COVID-19. However, sharing food in public places is not encouraged. Furthermore, standard operating procedures of food safety like thorough washing, avoid cross contamination, keeping raw and cooked foods separated, refrigeration and heating are highly suggested. The pandemic has dramatically increased food insecurity across the countries and threatens the food security and nutrition of millions of people. The review presents information about SARS-CoV-2 with respect to food, including a brief history of coronavirus, its classification and transmission. It further presents the role of food as a carrier of the virus, which looks unlikely so far but cannot be fully ruled out, food contamination and handling followed by prevention and safety measures as per the standard guidelines, and conclusive remarks.

In December 2019, an animal human coronavirus transmission occurred in Wuhan, China. A state of global pandemic was shortly declared, among a very rapid contagious spread of the virus. The causative virus was identified as SARS CoV 2 virus and is genetically related to the previous SARS outbreak in 2003. The virus causes wide clinical spectrum from mild flu like symptoms to adult respiratory distress syndrome. Kidney involvement has been reported in several reports in patients with various degrees of severity of SARS CoV2 infection. As knowledge is evolving, the accurate incidence of AKI is not known. Many questions are yet to be answered as regards the effect of epidemiological variables and comorbidities on the occurrence of AKI. Some reports have observed the occurrence of hematuria and proteinuria in a percentage of infected patients. Moreover, chronic kidney disease has not been found in some reports to add to the adverse outcomes, an aspect that merits further exploration. Patients on regular hemodialysis may be vulnerable to contagion due to lower status of immunity and need for frequent attendance to healthcare facilities. Due to the previous factors, prevention and mitigation of SARS CoV2 virus in this vulnerable population constitutes a major challenge.

Post-COVID-19 bacterial infections are a significant threat to global health, mainly due to the overuse and misuse of antibiotics. The review highlights the importance of using antibiotics judiciously and following appropriate guidelines and recommendations. The article also examines the potential indirect contribution of steroids to antibiotic resistance through immune suppression in severe cases of COVID-19. Anti-microbial resistance (AMR) is one of the leading causes of death worldwide that continues as a silent pandemic caused by the major AMR superbug includes Carbapenem-resistant Acinetobacter baumannii (CRAB), Methicillin-resistant Staphylococcus aureus (MRSA), Carbapenem-resistant Enterobacterales (CRE), Extended-spectrum Beta Lactamase producing Enterobacterales (ESBL) which is resistant to cephalosporin and Multidrug-resistant (MDR) Pseudomonas aeruginosa. Ongoing surveillance and monitoring of antibiotic use and resistance helped to minimize the risk of antibiotic resistance and shrink it from pandemic to endemic.

More and more works are using machine learning techniques while adopting supervisory control and data acquisition (SCADA) system for wind turbine anomaly or failure detection. While parameter selection is important for modelling a wind turbine’s health condition, only a few papers have been published focusing on this issue and in those papers interconnections among sub-components in a wind turbine are used to address this problem. However, merely the interconnections for decision making sometimes is too general to provide a parameter list considering the differences of each SCADA dataset. In this paper, a method is proposed to provide more detailed suggestions on parameter selection based on mutual information. Moreover, after proving that Copula, a multivariate probability distribution for which the marginal probability distribution of each variable is uniform is capable of simplifying the estimation of mutual information, an empirical copula based mutual information estimation method (ECMI) is introduced for an application. After that, a real SCADA dataset is adopted to test the method, and the results show the effectiveness of the ECMI in providing parameter selection suggestions when physical knowledge is not accurate enough.

For offshore wind power generation, accessibility is one of the main factors that has great impact on operation and maintenance due to constraints on weather conditions for marine transportation. This paper presents a framework to explore the accessibility of an offshore site. At first, several maintenance types are defined and taken into account. Next, a data visualization procedure is introduced to provide an insight into the distribution of access periods over time. Then, a rigorous mathematical method based on finite state Markov chain is proposed to assess the accessibility of an offshore site from the maintenance perspective. A five-year weather data of a marine site is used to demonstrate the applicability and the outcomes of the proposed method. The main findings show that the proposed framework is effective in investigating the accessibility for different time scales and is able to catch the patterns of the distribution of the access periods. Moreover, based on the developed Markov chain, the average waiting time for a certain access period can be estimated. With more information on the maintenance of an offshore wind farm, the expected production loss due to time delay can be calculated.

The electric vehicle (EV) industry is experiencing rapid growth, accompanied by continuous advancements in charging infrastructure to satisfy the rising need for fast and reliable charging. Particularly, the focus has shifted towards EV fast charging (EVFC) and its impact on the power grid. This paper presents a comprehensive analysis and survey of scholarly literature and projects conducted in this field over the past decade. The findings highlight the rising demand for EVFC and the need to address its potential adverse effects on the power grid. However, there is a noticeable lack of clear research guidance regarding charging time. To tackle these challenges and pave the way for future solutions, extensive research on DC fast charging, ultra-fast charging, and the integration of vehicle-to-grid (V2G) systems is required. This review paper thoroughly investigates the development of fast charging technology for electric vehicles (EVs), including its advantages and comparative analyses from various perspectives. Furthermore, it delves into the advancements in DC fast charging infrastructure, emphasizing charging standards and control modes. The study also investigates different categories of battery chargers for both on-board and off-board charging. Additionally, it explores the classification of DC-DC converters in the context of DC fast charging stations, discusses control strategies for EV systems, identifies existing challenges, and outlines future trends in EV fast charging.

Background: Helicobacter pylori (H. pylori) is a prevalent bacterial pathogen implicated in various gastroduodenal diseases, including chronic gastritis, peptic ulcer disease, and gastric cancer. The COVID-19 pandemic has significantly influenced antibiotic prescription practices, potentially exacerbating antibiotic resistance in H. pylori. Objective: This study aims to investigate antibiotic prescription during COVID-19 pandemic in Croatia and its possible impact on H. pylori antibiotic resistance, with a focus on Croatia. Methods: A comprehensive literature search was conducted to identify relevant studies from March 2020 to June 2024. The search strategy included terms related to COVID-19, antibiotic prescription, and Croatia. Studies were selected based on predefined eligibility criteria, focusing on observational research addressing antibiotic use during the pandemic. Results: The COVID-19 pandemic leads to significant fluctuations in community antibiotic consumption within the European Union/European Economic Area. In Croatia, antibiotic use in 2022 surpassed 2019 levels, driven by increased consumption of macrolides and other antibiotics. This surge, influenced by early pandemic treatment claims and penicillin shortages, contributed to rising antibiotic resistance in H. pylori. Resistance rates to clarithromycin and levofloxacin were notably high, driven by mutations in the 23S rRNA, gyrA, and gyrB genes. Discussion: The increased antibiotic use during the COVID-19 pandemic has highly likely complicated H. pylori eradication efforts, highlighting the necessity of judicious antibiotic use and robust antimicrobial stewardship. The pandemic underscored the need for new therapeutic strategies, optimized eradication regimens, and advanced diagnostic methods to manage bacterial infections effectively. Conclusions: The COVID-19 pandemic has significantly impacted antibiotic use and resistance patterns, posing new challenges for H. pylori eradication. Addressing these challenges requires a multifaceted approach, including the development of new drugs and advanced diagnostics, coupled with sustained efforts in antimicrobial stewardship to combat emerging resistance threats.

A sense of crisis pervaded the university sector as Covid-19 spread, with worries about possible significant loss of income and students in its wake. This analysis examines several years of financial and student data through the pandemic (2020-2022) for Scottish universities. It shows that far from losing money or students, universities in Scotland gained both, and accelerated income growth during Covid. The University of Glasgow stands out not only among Scottish universities but also in the Russell Group in increasing income and student numbers faster than other institutions, becoming over the course of the pandemic, the third largest university in the UK and the largest in Scotland by student numbers. The driver of income growth for all Scottish universities is expanded intakes of international students, who primarily come from Asia and Africa. Across 2021 and 2022, Scottish Universities earned income totalling £1.7 billion from international tuition fee alone. Universities across the UK are increasingly dependent on yet continuing to actively pursue international tuition fees as a primary source of income. This paper documents the situation for Scotland, considering the implications of this growth trajectory in terms of: concentrating financial dependence on a single income source; rising casualisation of staff as a means of managing higher student numbers; impacts on learning and working conditions as students numbers rapidly expand; a shifting composition of students in higher education. It concludes with reflections on: a blurring boundary between the practices and values of profit-making companies and those of the charitable university sector; the ethical and colonial implications in international student recruitment and targeting of ‘new markets’ in the Global South; and the implications of all this for the shape, health and purpose of the university sector in Scotland.

Introduction Most cases of COVID-19 coronavirus infection occurred in the Chinese city of Wuhan at the end of December 2019 in the form of acute pneumonia. COVID-19 virus infects people of all ages. The most affected elderly people with underlying medical conditions. This may cause various symptoms such as fever, difficulty breathing, lung infection, coughing and sneezing. Aim The aim of the present study to highlight the COVID-19 pandemic in Saudi Arabia. Method A search was conducted using the relevant keywords to retrieve the studies conducted in Saudi Arabia regarding COVID-19. The search was by Google Scholar, Pub MED, and Twitter. Conclusion The COVID-19 pandemic carries multiple-risk, and public health groups, such as the United States' Centres for Disease Control and Prevention (CDC) and the World Health Organisation (WHO), are monitoring the pandemic and posting updates on their website. These groups have also made recommendations on disease prevention and treatment, and according to the Saudi Centres for Disease Control, they have also included the necessary public health measures for mandatory reporting by calling a certain number and through the e-health monitoring network.

The outbreak of COVID-19 has brought unprecedented risks and challenges to everyone in the world. Myasthenia gravis is an autoimmune disease of the nervous system. Infection can worsen it and cause severe symptoms such as myasthenia crisis and respiratory failure. At present, the pandemic of COVID-19 may promote the aggravation of patients with MG. This article focuses on the respiratory management of MG patients during the epidemic of COVID-19.

COVID-19 is an infectious disease, growth of which depends upon the linked stages of the epidemic, the average number of people one person can infect and the time it takes for those people to become infectious themselves. We have studied the COVID-19 time series to understand the growth behaviour of COVID-19 cases series. A structural break occurs in the COVID-19 series at the change time form one stage to another. We have performed the structural break analysis of data available for 207 countries till April 20, 2020. There are 42 countries which have recorded five breaks in COVID cases series. This means that these countries are in the sixth stage of growth transmission and show a downward pattern in reporting in the daily cases, whereas countries with two and three breaks, record the rapid growth pattern in the daily cases. From this study, we conclude that the more the breaks in the series, there is more possibility to determine the constant or decreasing rate of daily cases. It is well fitted using lognormal distribution as this distribution is archived at its highest peak after some period and then suddenly it decreases at a longer time period. This can be seen in various countries like China, Australia, New Zealand and so on.

An outbreak of a pandemic COVID-19 disease caused by a novel coronavirus SARS-CoV-2 has posed a serious threat to human health and the economy of the whole world. Bangladesh is one of the most densely populated countries in the world, which has also come under the attack of this viral disease. This perspective report aimed to describe the responses of Bangladesh to tackle the COVID-19, particularly on how Bangladesh is dealing with this novel viral disease with limited resources. The first case of a COVID-19 patient was detected in Bangladesh on March 8, 2020. Since then, a total of 2,144 peoples are officially reported as COVID-19 infected with 84 deaths. To combat the COVID-19, the government has taken various steps to tackle the epidemic outbreak of it such as diagnosis of the suspected cases, quarantine of doubted people and isolation of infected patients, local or regional lockdown, grant general leave from all offices for staying home of people, increase public awareness and enforce social distancing and so on. In addition, to address the socio-economic situations, the government announced several financial stimulus packages of about USD 11.17 billion. However, very limited diagnostic facilities, health workers, resources such as hospital beds, personal protective equipment, intensive care unit, and ventilators in the hospitals along with limited public unawareness are the major challenges for Bangladesh to tackle the situation effectively. This report described the responses of Bangladesh to tackle the COVID-19 and discusses prevailing challenges to mitigate this highly contagious disease with limited resources.

In order to investigate the size distributions and seasonal variations of carbonaceous aerosols (OC and EC), the carbonaceous species were collected and then analyzed by using a 9-stage Anderson-type aerosol sampler and DRI Model 2001A Thermal/Optical Carbon Analyzer on the typical industrial city Nanjing in Yangtze River Delta, China in the summer, autumn and winter of 2013 and spring of 2014. OC, EC, SOC and POC exhibited obvious seasonal variations, with the highest level in winter (39.1±14.0, 5.7±2.1, 23.6±11.7 and 14.1±5.7 μg•m^-3) and the lowest level in summer (20.6±6.7, 3.3±2.0, 12.2±3.8 and 8.4±4.1 μg•m^-3), and were mainly centralized in PM_1.1 in four seasons. The concentrations of OC in PM_1.1 varied in the order of winter > autumn > spring > summer, while EC ranked in the order of autumn > winter > summer > spring. In the PM_1.1-2.1 and PM_2.1-10, the concentrations of OC and EC decreased in the sequence of winter > spring > autumn > summer. The size spectra of OC, EC and SOC had bimodal distributions in four seasons, except for EC with four peaks in summer. The size spectra of POC varied greatly with seasons, exhibiting bimodal distribution in winter, trimodal distribution in spring and summer, and four peaks in autumn. The OC/EC ratios were 7.0, 6.3, 7.6 and 6.9 in spring, summer, autumn and winter, respectively, which demonstrated the abundance of secondary organic aerosols in Nanjing. The sources of carbonaceous aerosol varied significantly with seasons, and were dominated by vehicle exhaust, coal and biomass burning in PM_2.1, and dominant by dust, coal and biomass burning in PM_2.1-10.

Standardised forms for capturing clinical data promote consistency in data collection and analysis across study sites, enabling faster, higher-quality evidence generation. ISARIC and the World Health Organization have developed case report forms (CRFs) for the clinical characterisation of several infectious disease outbreaks. To improve the design and quality of future forms, we analysed the inclusion and completion rates of the 243 fields on the ISARIC-WHO COVID-19 CRF. Data from 42 diverse collaborations, covering 1,886 hospitals and 950,064 patients were analysed. A mean of 129.6 fields (53%) were included in the adapted CRFs implemented across the sites. Consistent patterns of field inclusion and completion aligned with globally recognised research priorities in outbreaks of novel infectious diseases. Outcome status was the most highly included (95.2%) and completed (89.8%) field, followed by admission demographics (79.1% and 91.6%), comorbidities (77.9% and 79.0%), signs & symptoms (68.9% and 78.4%) and vitals (70.3% and 69.1%). Mean field completion was higher in severe patients (70.2%) than in all patients (61.6%). The results indicate that clinical characterisation CRFs can be streamlined to reduce data collection time, including the modularisation of CRFs to offer a choice of data volume collection and the separation of critical care interventions. This data-driven approach to designing CRFs enhances the efficiency of data collection to inform patient care and public health response.

Graph theory plays significant role in every field of science as well as technology. Every situation can be articulated in terms of suitable graphs by using various approaches of graph theory. Considering the recent pandemic in the world and the precautions taken for prevention of the COVID 19, it is the most appropriate way to exercise the graph models with theoretical as well as practical aspects to control this epidemic. This paper defines the variable set, variable graphs and their types with respect to variable vertex sets and variable edge sets. Depending upon the nature of the pandemic, there are four types of Virus graphs. Virus graph I and III are not so perilous for all living beings. Although, Virus graphs II and IV are extremely hazardous for the harmony of the world. In view of different aspects for expand of pandemic, growth types of virus graphs are divided in 1-1, 1-P and 1-all growth types. The COVID19 initially was in Virus graph-I type, but presently it is in Virus graph-II types. We present the table involving the number of infected people after n days with respect to different values of P and growth rates with I0 = 100. Moreover, the country wise starting dates of stages of the virus graph-I and II are specified. The concept of cut sets is applicable for prevention of COVID19 and the whole world is using the same analogy.

The technology-driven world of the 21^st century is currently confronted with a major threat to humankind in the form of the coronavirus disease (COVID-19) pandemic, caused by the severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2). As of April 22, 2020, COVID-19 has claimed 169, 006 human lives and had spread to over 200 countries with more than 2,471,136 confirmed cases. The perpetually increasing figures associated with COVID-19 are disrupting the social and economic systems globally. The losses are unmatched and significantly higher compared to those from previously encountered pathogenic infections. Previously, two CoVs (SARS-CoV and Middle East respiratory syndrome-CoV) affected the human population in 2002 and 2012 in China and Saudi Arabia, respectively. Based on genomic similarities, animal-origin CoVs, primarily those infecting bats, civet cats, and pangolins, were presumed to be the source of emerging human CoVs, including the SARS-CoV-2. The cohesive approach amongst virologists, bioinformaticians, big data analysts, epidemiologists, and public health researchers across the globe has delivered high-end viral diagnostics. Similarly, vaccines and therapeutics against COVID-19 are currently in the pipeline for clinical trials. The rapidly evolving and popular technology of artificial intelligence played a major role in confirming and countering the COVID-19 pandemic using digital technologies and mathematical algorithms. In this review, we discuss the noteworthy advancements in the mitigation of the COVID-19 pandemic, focusing on the etiological viral agent, comparative genomic analysis, population susceptibility, disease epidemiology, animal reservoirs, laboratory animal models, disease transmission, diagnosis using artificial intelligence interventions, therapeutics and vaccines, and disease mitigation measures to combat disease dissemination.

Rapidly spreading disease, COVID-19 is classified as the human-to-human transmission-able disease and currently is a pandemic in the Globe. In this paper, we propose conceptual mathematical models for COVID-19 outbreak and it's control measurement; quarantine, hospitalization and the effect of panic and anxiety. In this situation, mathematical models are a important tool to employ an effective strategy in order to fight against this pandemic. We establish the positivity and boundedness of solutions, local and global stability analysis of equilibria to examine its epidemiological relevance. To validate the model and estimating the important model parameters and prediction about the disease, we consider the real cases of Italy from $15^{th}$ Feb to $13^{th} $ April 2020. In a series of graphical map, we have presented the comparative study to estimate the current scenarios and to predict the control measurement time boundary of the outbreak.

Background: Attendance to neonatal follow-up programs (NFU) presents as a significant factor associated with long-term outcome of high-risk infants. Few studies have focused on attrition or loss to follow up particularly during COVID-19 pandemic. Methods: In this retrospective observational study, data from 1137 high-risk neonates who participated in a hospital NFU program were collected (573 before and 564 after the onset of COVID-19 pandemic). The study sample was grouped to: G1 (N=831) who maintained participation in the program, G2 (N=196) who discontinued, and G3 (N=110) who never visited the outpatient clinics. Data was obtained from the hospital's Systems Applications and Products Software, and a structured questionnaire, answered by parents of newborns either discontinuing (G2) or not attending (G3) the NFU program, through a telephone contact.Results: The most frequently reported reason for discontinuance before the onset of the pandemic was the parents' perception that it was not necessary to maintain participation in the program (44.12%). During the COVID-19 pandemic, provider-related barriers to maintaining hospital access, inability to provide high-quality services (37.14%), and feelings of fear and insecurity (18.5%), emerged as factors for non-attendance. Citizenship and morbidity (RDS, sepsis, NEC, jaundice) acted as incentives to join the NFU program during both study periods. Multiple regression analysis showed that multiple gestation infants had higher odds for maintaining participation during the COVID-19 period (OR, 4.04; CI, 1.09-14.9). Conclusion: Understanding the potential impact of COVID-19 and the transformative changes in NFU clinics is crucial to apply compliance strategies. Removing barriers to maintain family participation can lead to increased attendance rates.

COVID 19 has caused social distancing and lead to the reductions of various anthropogenic activities. Correspondingly this study has two fold objectives. First, aims to provide quantification measurement of social distancing impacts on air quality. Second, to forecast the air quality if social distancing is continued. The measured air quality parameters consist of NO₂, SO₂, and O₃. According to the results, the order of air quality parameters was NO₂<SO₂<O₃. The NO₂, SO₂, and O₃ levels were observed lower after social distancing than before social distancing was implemented. The reductions of NO₂, SO₂, and O₃ levels were 5%, 3%, and 5% respectively. Likewise, 65% of study periods (30 days) after implementation of social distancing have lower NO₂ than before social distancing. The exponential smoothing forecasts show the decreasing trends for NO₂ and SO₂. While O₃ levels are estimated will remain stable after social distancing. This study has shown that the social distancing has an impact on the NO₂, SO₂, and O₃. Correspondingly, if the social distancing is continued, then it is estimated can provide a positive impact on urban quality. Keywords: COVID 19, forecast, NO₂, O₃, SO₂.

Evapotranspiration is a critical component of the hydrological cycle, and it has a decisive impact on the ecosystem balance in arid and semi-arid regions. The Yinchuan Plain, located in the Gobi of Northwest China, has a strong surface ET. In order to assess the ET pattern in this region, we obtained the ETa of Yinchuan Plain between 1987 and 2020 using the GEE platform. We employed the Surface Energy Balance Model (SEBAL), specifically geeSEBAL, to analyze the change pattern of ET over different seasons, years, and land types. The results show that: ① In spring, the daily ETa of the Yinchuan Plain is highest in the central lake wetland area, with a maximum value of 4.32 mm day-1. In summer, it is concentrated around the croplands and water bodies, with a maximum value of 6.90 mm day-1; In Autumn and winter, it is mainly concentrated around the water bodies and impervious areas, with maximum values of 3.93 and 1.56 mm day-1, respectively. ② From 1987 to 2020, the ET of the Yinchuan Plain showed an obvious upward and downward trend in some areas with significant land use changes, but the overall ET of the region remained relatively stable without dramatic fluctuations. ③ The evapotranspiration of different underlying land use types in the Yinchuan Plain region is as follows: water body&gt;cultivated land&gt;impervious&gt;grassland&gt;bare land. Our results showed that geeSEBAL is highly applicable in the Yinchuan Plain area. It allows for the accurate and detailed inversion of ET in the study area, which facilitates the study of regional hydrological cycle and water governance.

This study critically reviews the situation of Language teachers in China, who transited from on-campus face-to-face teaching to online teaching within one week of the official school opening dates, which were postponed due to the outbreak of the COVID-19 pandemic. Presently, the study is located in an interpretive research paradigm, and hence, it takes the human experiences within educational setups to be subjective and complex. In so doing, to elude this educational transition and its complex dynamics, the research uses such qualitative research methods as document analysis and interviews. Painting a picture of great variety in individual experiences and challenges, strategies, and outcomes not only across these two specific institutions but, certainly, more broadly through the lens of previous case studies. First, it values depth over breadth and tries to unearth the varied experiences, challenges, innovations, and achievements faculty made during their transition into online Language Teaching. The results of the study are believed to be able to contribute quite a rich, detailed, and multi-faceted perspective to the pool of knowledge for the complexities of online Language education in China, which may be of interest to educators, policymakers, and researchers.

Background: Previous studies have found variable impact of the coronavirus disease 2019 (COVID-19) pandem-ic on the consumption of antimicrobial drugs in human medicine, with trends in several European countries differing between community and inpatient prescribing. Aim: This study analysed changes in the volumes and use density of antibacterial and antifungal drugs dis-pensed in acute care hospitals in Germany between 2019 and 2022. Methods: Surveillance data for the four years available from 279 hospitals, among them 272 for antifungals, were expressed as the total volumes of daily doses or as use density (daily doses per 100 patient/occupied bed days) per year and analysed descriptively, using recommended hospital-adapted daily dose definitions (RDD) and (as sensitivity analysis) WHO/ATC-defined daily dose definitions (DDD). Hospitals were stratified according to size (number of beds) and university affiliation, and location (East, West, South). Results: There were significant decreases both in the total number of patient days and antibacterial drug vol-umes in 2020 through 2022 compared with 2019. The relative changes between 2019 and 2020, 2021 and 2022 were -12.8%, -13.5%, and -13.3% for patient days, and -9.7%, -11.0%, and -10.1% for antibacterial RDD, respec-tively. Broad-spectrum betalactams, notably piperacillin-tazobactam and carbapenems, increased in volume unlike most other drug classes. The resulting antibacterial drug use density was slightly but significantly increas-ing with pooled means (and medians) of 43.3 (40.0) RDD/100 in 2019 compared to 44.8 (41.7), 44.5 (40.80), and 44.9 (41.7) RDD/100 in the years 2020 through 2022, respectively. Antifungal drug volumes and use density increased after 2019 and peaked 2021 (differences between 2019 and 2021 for total volumes +6.4%, and for pooled mean use density values +22.9%, respectively). These trends were similar in the different hospital strata and comparable when DDD instead of RDD were used. Conclusions: Similar to what has been observed in a majority of European countries the total volume of antibac-terial drug use in German acute care hospitals decreased with the pandemic without a rebound phenomenon in 2022. In association with restricted hospital capacities and presumably more immunocompromised general medi-cine patients, however, inpatient prescribing of (primarily broad-spectrum) antibacterials and of antifungal drugs increased.

Real assets in the energy market are subject to ecological uncertainty due to the penetration of renewables. We illustrate this point by analysing electrolysers, a class of assets which recently became the subject of a large interest, as they lead to the production of the desirable green hydrogen and green ammonia. The latter has the advantage of being easily stored and has huge potential in decarbonising both the fertilizer and shipping industries. We consider the optimization of green ammonia production with different types of electricity procurement in the context of stochastic power and ammonia markets, a necessary assumption to translate the features of renewable, hence intermittent, electricity. We emphasise the importance of using stochastic prices to effectively model the volatile nature of the price dynamics, illustrating the project risks that can be mitigated by hedging activities. This study shows the pivotal role of flexibility when dealing with fluctuating renewable production and volatile electricity prices to maximise profits and better manage risks.

The Vacuum Energy Parameter (VEP) of standard cosmology denotes the fraction of the critical density attributed to the accelerated expansion of the Universe. Astrophysical evidence sets the numerical range of VEP at 0.692 +, - 0.012, yet the root cause of these values is currently unknown. Drawing from the stochastic interpretation of early-Universe cosmology, we develop here a derivation of the VEP based on classical diffusion theory and the Langevin equation. Predictions are shown to be in reasonable agreement with observations.

The world of education has changed. And for all the trials and challenges of managing education during a pandemic, we have also learned a few things that can make our teaching and learning experiences even better in the future.The pandemic imposed constant balance exercises in all aspects of our daily life, including education. Suddenly the living room of the house turned into a work space, the kitchen replaced the canteen, the children's office became a student seat. There was a new area of unknown, irregular and unpredictable forced experimentation. Now what is right, beneficial and effective is an unanswerable question in the absence of previous experience, and the only way to answer it is by trial and error.Universities, in the context of "emergency" remote teaching, also had to experiment. Professors and students found themselves inside virtual classrooms, facing digital boards, closed cameras and microphones.How could a professor not be frustrated by low levels of interaction during the lesson, and how could a student understand a problem without disrupting the fragile digital teaching flow? What was the learning outcome after each two-hour e-teaching? Was the learner's attention maintained, the learning objective achieved, knowledge transferred, new skills acquired? The answers had to be given through experimentation, creativity and innovation.To stop digital teaching from being monotonous and boring, we tried to turn it into a game in order to engage students and lead to better learning outcomes. Gamification is the use of game mechanics in non-game situations. It involves the use of video game elements, such as leaderboards, levels and badges in non-game activities aimed at improving the user experience and increasing user engagement. We find examples of gamification in various fields, e.g. in physical exercise and health (Pereira et al., 2014; Johnson et al., 2016), in the promotion of products and services (Huotari, & Hamari, 2012) and, of course, in education (Triantafyllou & Georgiadis, 2022). For example, airlines enable travelers to earn points with each trip that they can later redeem, or sports equipment companies have developed apps on smart phones and watches so that users can celebrate their performance with digital trophies, compete and challenge their running friends.In the learning process, gamification includes direct feedback mechanisms for learners, point systems, ranking tables, prizes, badges, progress bars and avatars among others, with the main objectives of mobilizing, encouraging and guiding the participant to achieve learning progress. Game-based learning makes the most of these mechanisms with an a priori architecture, which clearly defines the goal of the game, its basic functions and scenario, the rules of progression, competition and interaction with the application and teammates (Triantafyllou & Sapounidis, 2023).The reason why gamification is of particular interest is that research shows an increased degree of involvement and interest of participants when an environment or activity incorporates elements of gamification (Triantafyllou & Georgiadis, 2022). Game-based learning therefore activates not only cognitive functions, such as attention or perception, but also feelings of excitement, surprise, joy, sadness or even anger. This experience results in the achievement of meaningful learning objectives, such as deepening knowledge and developing intrapersonal (e.g. project scheduling) and interpersonal skills (e.g. collaboration).

Objectives to assess COVID-19 mortality rates per country population. To determine what if any independent country-specific variables from 9 different databases were correlated. Design population based retrospective cohort study. Setting analysis of global COVID-19 treatment and containment strategies using data from 9 worldwide websites. Participants 108 countries worldwide. Interventions none. Main Outcome Measures were COVID-19 death rates per country population analyzed by univariate and multivariate analysis. The main outcome parameters were to determine if there are any correlations between the percentage of countrywide COVID-19 deaths/population by the countries’ percent vaccinated. Secondary outcome measures include the effect of other independent variables on COVID-19 death rates per country population including: health expenditures per capita, annual income per capita, COVID-19 tests per 1000 people, stringency index (a measure of each countries containment strategies), hydroxychloroquine score (a measure of each countries use), ivermectin score (a measure of each countries use), hypertension, obesity, diabetes, and specific countries and geographic locations. Results COVID-19 vaccination rates ranged from 0-99% in 108 countries. Univariate analysis demonstrates the following independent variables to correlate with COVID-19 deaths/population (correlation coefficient, p value): countrywide COVID-19 vaccination rates (+0.2936, p=0.002); healthcare costs per capita (+0.3212, p=0.0007), income per capita (+0.3051, p=0.0013), COVID-19 tests per 1000 population (+0.6981 p=0.0307); stringency index (+0.3098, p=0.0011); hydroxychloroquine index (-0.1337, p=0.0678); and ivermectin index (-0.1383, p=0.1535). Conclusions Increasing rates of COVID-19 vaccination are associated with increase COVID-19 death rates per country population (p=0.002). Other variables associated include healthcare costs per capita (+0.3212, p=0.0007), income per capita (+0.3051, p=0.0013), COVID-19 tests per 1000 population (+0.6981 p=0.0307); and stringency index (+0.3098, p=0.0011).

Background We intend to examine whether the COVID-19 outbreak influences medical decision-making (MDM) among Non-COVID patients. Method We recruit 287 patients who admit to ER department due to cardiovascular complaints. Anxiety level was measured using three questionnaires (GAD-7, Beck Inventory, and the cardiac anxiety questionnaire). A fourth survey was designed to assess MDM considerations. Results 64% of patients were male (median age 54). Almost half of the patients were found to have moderate to severe levels of anxiety.79.3% of patients reported that the outbreak influenced their MDM. 44.5% of patients sought medical care 2-3 from the onset of symptoms. Coronary artery disease was found in only 26 patients (9.1%). Almost half of the patients stated that they would have gone earlier if not for the current pandemic. Conclusion Non-COVID patients seeking medical care had a high anxiety level that directly affected decision-making and put them at unnecessary risk.

COVID-19 is a potentially fatal viral infection. This study investigates geography, demography, socioeconomics, health conditions, hospital characteristics, and politics as potential explanatory variables for death rates at the state and county levels. Data from the Centers for Disease Control and Prevention, the Census Bureau, Centers for Medicare and Medicaid, Definitive Healthcare, and USAfacts.org were used to evaluate regression models. Yearly pneumonia and flu death rates (state level, 2014-2018) were evaluated as a function of the governors’ political party using repeated measures analysis. At the state and county level, spatial regression models were evaluated. At the county level, we discovered a statistically significant model that included geography, population density, racial and ethnic status, three health status variables along with a political factor. State level analysis identified health status, minority status, and the interaction between governors’ parties and health status as important variables. The political factor, however, did not appear in a subsequent analysis of 2014-2018 pneumonia and flu death rates. The pathogenesis of COVID-19 has greater and disproportionate effect within racial and ethnic minority groups, and the political influence on the reporting of COVID-19 mortality was statistically relevant at the county level and as an interaction term only at the state level.

The present novel corona virus (2019-nCoV) infection has created a global emergency situation by spreading all over the world in a large scale within very short time period. The infection induced death rate is also very high. There is no vaccine or anti-viral medicine for such infection. So at this moment a major worldwide problem is that how we can control this pandemic. On the other hand, India is a high population density country, where the corona virus disease (COVID-19) has started to spread from $1^{st}$ week of March, 2020 in a significant number of COVID-19 positive cases. Due to this high population density human to human social contact rate is very high in India. So control of the pandemic COVID-19 in early stage is very urgent and challenging problem. Mathematical models are employed in this paper to study the COVID-19 dynamics, to identify the influential parameters and to find the proper prevention strategies to reduce the outbreak size. In this work, we have formulated a deterministic compartmental model to study the spreading of COVID-19 and estimated the model parameters by fitting the model with reported data of ongoing pandemic in India. Sensitivity analysis has been done to identify the key model parameters. The basic reproduction number has been estimated from actual data and the effective basic reproduction number has been studied on the basis of reported cases. Some effective preventive measures and their impacts on the disease dynamics have also been studied. Future trends of the disease transmission has been Predicted from our model with some control measures. Finally, the positive measures to control the disease have been summarized.

The constant news about the corona virus is scary. It is not possible to separate treatment for Cancer due to COVID-19. An effective treatment comparison strategy is needed. We need to have a handy tool to understand cancer progression in this unprecedented scenario. Linking different events of cancer progression is the need of the hour. It is a methodological challenge. We provide the solutions to overcome the issue with interval between two consecutive events in motivating head and neck cancer (HNC) data.

The current COVID-19 pandemic is one of the most devastating events in recent history. The virus causes relatively minor damage to young, healthy populations, imposing life-threatening danger to the elderly and people with diseases of chronic inflammation. Therefore, if we could reduce the risk for vulnerable populations, it would make the COVID-19 pandemic more similar to other typical outbreaks. Children don’t suffer from COVID-19 as much as their grandparents and have a much higher melatonin level. Bats are nocturnal animals possessing high levels of melatonin, which may contribute to their high anti-viral resistance. Viruses induce an explosion of inflammatory cytokines and reactive oxygen species, and melatonin is the best natural antioxidant that is lost with age. The programmed cell death coronaviruses cause, which can result in significant lung damage, is also inhibited by melatonin. Coronavirus causes inflammation in the lungs which requires inflammasome activity. Melatonin blocks these inflammasomes. General immunity is impaired by anxiety and sleep deprivation. Melatonin improves sleep habits, reduces anxiety and stimulates immunity. Fibrosis may be the most dangerous complication after COVID-19. Melatonin is known to prevent fibrosis. Mechanical ventilation may be necessary but yet imposes risks due to oxidative stress, which can be reduced by melatonin. Thus, by using the safe over-the-counter drug melatonin, we may be immediately able to prevent the development of severe disease symptoms in coronavirus patients, reduce the severity of their symptoms, and/or reduce the immuno-pathology of coronavirus infection on patients’ health after the active phase of the infection is over.

This article investigated whether the atmospheric temperature had any role in the spread and vulnerability to COVID-19 worldwide and how that knowledge can be utilized to contain the fast-spreading disease. It highlighted that temperature was an important factor in transmitting the virus, and a moderately cool environment was the most favourable state for its susceptibility. In fact, the risk from the virus is reduced significantly in high temperature environment. Warm countries and places were likely to be less vulnerable. We identified various degrees of vulnerability based on temperature and specified countries for March and April. The maximum reported case, as well as death, was noted when the temperature was in the range of around 275°K (2°C) to 290°K (17°C). Countries like the USA, UK, Italy and Spain belonged to this category. The vulnerability was moderate when the temperature was less than around 275°K (2°C) and countries in that category were Russia, parts of Canada and few Scandinavian countries. For temperature 300°K (27°C) and above, a significantly lesser degree of vulnerability was noted. Countries from SAARC, South East Asia, the African continent and Australia fell in that category. In fact, when the temperature was more than 305°K (32°C), there was a unusually low number of reported cases and deaths. For warm countries, further analyses on the degree of vulnerability were conducted for the group of countries from SAARC and South East Asia and individual countries were compared. We also showed countries can switch from one vulnerability state to another based on the variability of temperature. We provided maps of temperature to identify countries of different vulnerability states in different months of the year. That influence of temperature on the virus and previous results of clinical trials with similar viruses gave us a useful insight that regulating the level of temperature can provide remarkable results to arrest and stop the outbreak. Based on that knowledge, some urgent solutions are proposed, which are practically without side effects and very cost-effective too.

The aim of study was to investigate epidemiology aspects of magnetic resonance imaging (MRI) during COVID-19 pandemic. The study comprised depersonalized residents of Tomsk and Tomsk Region (n = 1714). Invitations to take online survey were sent to 50,000 residents by target SMS with response rate of 1.2% (n = 727, Cohort 1). Cohort 2 comprised retrospective patients (n = 987) who underwent contrast-enhanced cardiac MRI (CMR) in 2019-2022. Referrals, clinical characteristics, diagnosis, gender, age, past COVID-19, MRI study protocols, and MRI data were analyzed. 29% of respondents in cohort 1 received MRI examination within past two years; 26% of respondents considered MRI the most informative imaging modality for detecting COVID-19 pneumonia; 12% of respondents reported MRI unavailable. Proportion of CMR among MRI studies increased during COVID-19 pandemic, and maximum incidence of cardiac diseases detected by MRI was in 2021. Incidence of myocardial fibrosis increased from ~67% in 2019 to ~84% in 2022. The rate of outpatient MRI studies significantly increased in 2020, but returned to pre-pandemic level in 2021. COVID-19 pandemic increased the need for MRI and CMR. Patients with history of COVID-19 had persistent and newly occurring symptoms of myocardial damage suggesting chronic cardiac involvement requiring continuous follow-up.

The aim of this article is to present the course of the COVID-19 pandemic in Poland in 2020-2022, the formation of ad hoc health and anti-crisis policies, an assessment of crisis management and the perceived impact of the pandemic and anti-crisis measures.The paper draws on literature, official reports on the pandemic, data from Eurostat and other information from state institutions and public organisations.Particular attention was paid to the analysis and evaluation of the objectives, instruments and effects of the policies pursued by the state in a coordinated manner, i.e. the anti-pandemic policy and the anti-crisis policy. The anti-pandemic policy in Poland has failed to protect the country from significant personal losses and negative impacts on the health of the population and demographic processes.The anti-crisis policy of the state carried out with the mobilisation of businesses and disciplined society, in the form of anti-crisis shields supplemented and adjusted on an ongoing basis, allowed Poland to avoid a deep crisis and economic recession. Attention was drawn to the need to coordinate the management of health and economic crises nationally and internationally, and to the need to have a medium-term anti-crisis state strategy and a system for the early detection of crisis symptoms.

In the year in which the world "stopped" due to the pandemic, many people didn't have that option and had to keep moving as the only alternative to survive. One of the main destinations in South America, during the quarantine measures established around the world, was Brazil, especially because of the crisis Venezuela went through in the second half of the 2010s. Throughout the research, we observed measures that were applied by the Brazilian government on the grounds of public health issues or cases of health risks related to COVID-19. An analysis of the first measures published by the Brazilian government reveals an effort to securitize borders, which at the same time restricted the government's responsibility to fulfil its role of protecting migrants in need.

The COVID-19 pandemic necessitated a profound shift to online education, impacting students across various educational levels. This research, drawing from a comprehensive survey of 1,000,000 students, delves into the surge in demand for online education during the pandemic and its potential enduring implications. The study scrutinizes factors steering this transition, the perceived effectiveness of online education, challenges encountered by students, and their anticipated preferences for the future. Results unveil nuanced perspectives among K-12, undergraduate, and postgraduate students, with safety, flexibility, and accessibility emerging as pivotal influencers. The findings offer valuable insights into challenges faced and future preferences, enlightening educational stakeholders about the dynamic needs of students and contributing to the ongoing evolution of the post-pandemic educational landscape.

This exploratory study examined the impacts of COVID-19 and emerging challenges and opportunities from aviation recovery. Using archival and secondary data analysis, the study found that there are several challenges to aviation recovery chief among them are labour challenges and extreme weather events, which have been responsible for traffic disruptions in major aviation markets such as Europe and the USA. Other emerging challenges include high debt, inflation, interest rates, fuel, cost of labour, and general operational costs. The study recommends several interventions to address the sector’s challenges, including adopting risk disaster preparedness and management to foster sustainability.

The increasingly rapid flow of technological development is now a tool to improve backwardness, renew the system, as well as a means of improvement in various aspects of life. For companies, the development of information and communication technology is a new innovation or breakthrough to improve service quality. Various benefits provided by technology and information. However, if not handled properly, technology and information will become a boomerang for an organization. HRIS is the application of HRM functions in the application of information and communication technology. The concept of HRIS as a digital form of HRM is increasing along with the outbreak of the Covid-19 pandemic which has caused a large loss impact on all lines of life. The limitation of social interaction in an effort to prevent the wider spread of covid-19 and the higher number of casualties causes business activities to stall. This research uses quantitative methods with a study sample of 100 randomly selected. This study aims to see how clarity of high-tech goals in human resources management, perceived benefits, perceived ease of use, company conditions that can influence attitudes towards HRIS.

COVID-19 has created anxiety not only in individuals but also in health organizations, and countries worldwide. Not a single industry is left un-influenced and loss is being estimated in billions of dollars. The widespread of this pandemic disease has challenged researchers all over the world. Some of the researchers are working to invent its cure while, others are applying computing technologies to stop its spread, by analyzing and identifying patterns for prediction and forecasting. This is by no doubt the hottest area of research for the last 100 years. This survey has targeted the research published in computing sub-domains to combat the pandemic. The survey has clustered the scientific efforts into logical groups: surveillance, metrological effects, social media analytics, image processing and business and economy, analysis and modeling. It will serve as a leading source for the followings: researchers who want to identify what has been achieved in different computing sub-domains, those who need fresh authenticated datasets openly accessible for different research contexts and what are future directions in this area of research. The findings of analysis and modeling can be also useful for government agencies who want to set priorities and formulate policies.