The Inefficient water use, varying and low productivity in Kenya public irrigation schemes is a major concern. It is therefore necessary to periodically monitor and evaluate the performance of public irrigation schemes. The performance of public irrigation in western Kenya was assessed by combining benchmarking methodology and principal component analysis. The aim was to quantify and rank the performance of pumped public irrigation schemes in Kenya. Eleven benchmarking indicators were computed for the period from 2012 to 2016 and compared to global benchmark values. The indicators used fall under agricultural productivity, water supply and financial performance categories. The computed agricultural productivity was 36%–51% in Ahero, 23%–42% in West Kano and 26%–50% Bunyala irrigation scheme. Water supply performance in Ahero, West Kano and Bunyala irrigation schemes varied from 24% to 58%, 3% to 49% and 19% to 43% respectively. Financial performance varied from 46% to 54% in Ahero, 25% to 32% in West Kano and 54%–56% in Bunyala irrigation scheme. An average overall performance efficiency of 46%, 39% and 31% was obtained in Ahero, Bunyala and West Kano irrigation schemes respectively. The performance of the irrigation schemes is very poor and measures on improving performance are needed.

The mobile payment has been emerging as an alternative to cash and credit cards and is rapidly evolving around the world. This study integrated the general model of innovation diffusion theory (IDT) with the technology acceptance model (TAM) to examine the impact of near-field-communication (NFC) mobile payment environment on the restaurant operating performance (ROP). This paper used convenience sampling to distribute questionnaires to restaurant owners and managers in order to investigate the impact of NFC mobile payment environment on ROP. A total of 279 valid questionnaires were collected. The empirical results show that sales growth, cost saving, flexibility, accessibility and trust & safety had significantly positive impacts on ROP. After considering the restaurant size as a moderator for analysis, there are only two constructs- accessibility and trust & safety had significant impacts on ROP. This empirical finding could provide restaurateurs with a reference to improve ROP by increasing the mobile payment environment.

The range of rating instruments in depression measurement and the depth of their analytical relevance constitutes a major development in this psychiatric and psychotherapeutic field of mental health. Though the competition is acute amongst these various instruments, the results for the public have been outstandingly positive. A depression rating scale is essentially a psychiatric measuring instrument utilized in the identification and ranking of depression severity within the patient. The scale provides the practitioner, psychiatrist or psychotherapist, with sufficient information to assess the severity of the depression plotted on the scale. Not used as a “diagnostic tool” itself, nevertheless, the depression rating scale does function as an effective device for designating and assigning a behavioral score which may, then, be used in establishing the severity of depression of value in the designation of a diagnosis and treatment formula. In this paper, we will take a close look at the leading depression rating scales and briefly summarize their scope of assessment value in rating depression.

Statistical machine translation (SMT) which was the dominant paradigm in machine translation (MT) research for nearly three decades has recently been superseded by the end-to-end deep learning approaches to MT. Although deep neural models produce state-of-the-art results in many translation tasks, they are found to under-perform on resource-poor scenarios. Despite some success, none of the present-day benchmarks that have tried to overcome this problem can be regarded as a universal solution to the problem of translation of many low-resource languages. In this work, we investigate the performance of phrase-based SMT (PB-SMT) and NMT on two rarely-tested low-resource language-pairs, English-to-Tamil and Hindi-to-Tamil, taking a specialised data domain (software localisation) into consideration. This paper demonstrates our findings including the identification of several issues of the current neural approaches to low-resource domain-specific text translation and rankings of our MT systems via a social media platform-based human evaluation scheme.

This paper describes a system that is used to gather data from Smart Home sensors measuring energy consumption, analyze and predict future consumption by using machine learning algorithm for prediction. It focuses on the architecture of the system as well as the need for such system to exist in practice – why the consumption should be measured at all and how that measurement can be put to good use for achieving energy efficiency.

Global coverage and scale up of interventions to reduce newborn mortality remains low, though progress has been achieved in improving newborn survival in many low-income settings. An important factor in the success of newborn health interventions, and moving to scale, is appropriate design of community-based programs and strategies for local implementation. We report the results of formative research undertaken to inform the design of a newborn health intervention in Cambodia. Information was gathered on newborn care practices over a period of three months using multiple qualitative methods of data collection in the primary health facility and home setting. Analysis of the data indicated important gaps, both at home and facility level, between recommended newborn care practices and those typical in the study area. The results of this formative research have informed strategies for behavior change and improving referral of sick infants in the subsequent implementation study. Collection and dissemination of data on newborn care practices from settings such as these can contribute to efforts to advance survival, growth and development of newborns for intervention research, and for future newborn health programming.

The healthcare situation in Africa is characterized by limited resources and a high burden of disease, presenting significant challenges to the healthcare systems in the region. The integration of Artificial Intelligence (AI) technologies in African healthcare holds immense potential for addressing these challenges and improving health outcomes. This paper aims to provide a comprehensive understanding of the current healthcare landscape in Africa and the urgent need for AI-driven solutions.In addition to discussing the potential applications of AI in African healthcare, such as disease diagnosis, treatment planning, and medical imaging analysis, this manuscript seeks to shed light on the specific challenges hindering the implementation of AI in the region. By providing detailed examples and case studies, we aim to offer insights into the obstacles that need to be overcome and potential solutions that can be pursued.By leveraging AI technologies, Africa has the opportunity to revolutionize its health systems, bridging the gap in access to quality healthcare across the continent. The objective of this review article is to not only highlight the potential benefits that AI can bring to African healthcare but also to emphasize the urgent need for action and collaboration in implementing and scaling up AI innovations in the region. By doing so, African countries can pave the way for improved health outcomes and ensure that their populations receive the healthcare services they deserve.

We report on a new form of nanoscale carbon nitride in the shape of single layer half dome structures grown on the step edges of boron nitride sheets. The half dome structure grown on the step edges of boron nitride sheets. The half dome structures are formed spontaneously at high temperature using Iron oxide nanoparticles capped with tetremethylammonium hydroxide supported on BN sheets. During the combustion process the support, firstly, acted as a reducing agent, secondly, as a source of nitrogen that permitted the transformation of the organic capping agent in sp1 CN chains linked with sp2 CN domains. During the Ostwald ripening process smaller nanoparticles migrates towards bigger nanoparticles, when the nanoparticles come across the step edges of few layer boron nitride sheets the half dome structure is formed. This new method of synthesis has demonstrated for the first time the formation of half dome structures containing cyanopolyynes sp1 chains and sp2 carbon nitride domains.

Valence tautomerism (VT) may occur if a molecule contains two chemically different redox-active units, which differ only slightly in their intrinsic redox potential. Herein, we present three new half-sandwich complexes [(η6arene)Cr(CO)2L]+ with a triarylmethylium substituent appended to the -coordinated arene and different coligands L (L = CO, P(OPh)3, PPh3, 1+  3+) at the chromium atom. Ligand substitution purposefully lowers the half-wave potential for chromium oxidation and thereby the redox potential difference towards tritylium reduction. For the PPh3-substituted complex 3+, cyclic voltammetry measurements indicate that chromium oxidation and tritylium reduction occur at (almost) the same potential. This renders the diamagnetic Cr(0)C6H4CAr2+ form 3+ and its paramagnetic diradical Cr(I)+•C6H4CAr2• valence tautomer 3+•• energetically nearly degenerate. Temperature-dependent IR spectroscopy shows indeed two pairs of carbonyl bands assignable to a Cr(0) and a Cr(I) species, coexisting in a T-dependent equilibrium with almost equal quantities for both at 70 °C. The diradical form with one unpaired spin at the trityl unit engages in a monomer ⇌ dimer equilibrium, which was investigated by means of quantitative EPR spectroscopy. The diradical species 1+••  3+•• were found to be highly reactive, leading to several identified reaction products, which presumably result from hydrogen atom abstraction by the trityl C atom, e.g. from the solvent.

Since the launch of Protein Data Bank (PDB) in 1971, Cartesian coordinate system (CCS) has been the default approach to specify atomic positions in biomolecular experimental structures with X, Y and Z. In 2020, a local spherical coordinate system (LSCS) approach was proposed as an alternative to CCS, i.e., ρ, θ and φ. Recently, the continued application of deep learning technology in protein structure prediction (PSP) saw a leap forward in the accuracy of PSP, as evidenced by AlphaFold of Google’s DeepMind. However, there still is room for the improvement of the performances of PSP algorithms to date. Given that geometrically, CCS and LSCS are like the two sides of a coin, this short article puts forward a hypothesis that the time is now ripe to end the half-a-century burial of ρ, θ and φ in PDB, and use them as LSCS features for the design of novel PSP algorithms in future.

Surgical knots are sequences of half-knots (H) or half-hitches (S), defined by their number of throws, by an opposite or similar rotation compared with the previous one and for half-hitches, whether sliding (s) or blocking (b). Opposite rotation results in (more secure) symmetric (s) knots, similar rotation in asymmetric (a) knots, and changing active and passive ends has the same effect as changing rotation. Loop security is the force to keep tissue together after a first half-knot or sliding half-hitches. With polyfilament sutures H2, H3, SSs and SSsSsSs have a loop security of 10, 18, 28 and 48 Newton (N), respectively. With monofilament sutures, they are only 7, 16, 18 and 25N. Since many knots can reorganise, the definition of knot security as the force at which the knot opens or the suture breaks should be replaced by the clinically more relevant percentage of clinically dangerous and insecure knots. Secure knots with polyfilament sutures require a minimum of 4 or 5 throws, but the risk of destabilisation is high. With monofilament sutures, only 2 symmetric+4 asymmetric blocking half-hitches are secure. In conclusion, half-hitch sequences are recommended since mandatory for monofilament sutures, adding flexibility for loop security with less risk of destabilisation.

Six Half-ring with varying linewidth from 120nm to 370nm were connected in series on five corners. The magnetization reversal processes were investigated by the measurement of anisotropic magnetoresistances (AMR). The number of switching jumps in the AMR loops, from zero to five, varied with the longitudinal applied field. These discrete jumps result from domain wall nucleating and depinning on the corners. The larger external field applied the fewer number of jumps in the MR curve. This reproducible and particular-respondence of domain wall device in pattern of half-ring wire might be the new promising magnetoelectronic devices.

Introduction: The Get Active Questionnaire (GAQ), developed by the Canadian Society for Ex-ercise Professionals (CSEP) was recently recommended for pre-participation screening for the general population in Singapore before increasing exercise levels. This review examines the evi-dence behind the GAQ and relevance to our tropical environment. Methods: Searches were done via Pubmed, MEDLINE and the Cochrane Central Register of Controlled Trials. Resources referenced by the CSEP were hand-searched. The CSEP was also contacted for further information. Evidence behind each GAQ question was compared to inter-national literature and guidelines, where applicable. Results: Out of 273 studies, 49 were suitable for analysis. Two GAQ studies commissioned by the CSEP showed a high negative predictive value but high false negative rate. Of the nine GAQ questions, those on dizziness, joint pains and chronic diseases appear justified. Those on heart disease/stroke, hypertension, breathlessness and concussion require modification. That on syncope can be amalgamated into the dizziness question. The remaining question may be deleted. No long-term studies were available to validate use of the GAQ. Heat disorders were not considered in the GAQ. Conclusions: Modification of the GAQ, including inclusion of environmental factors, may make it more suitable for the general population and should be considered.

Button batteries pose a significant threat to young children and are found in many household items and children’s toys. Along with product manufacturers and retailers, parents and caregivers have a role in button battery ingestion prevention through vigilance regarding items containing button batteries in the home, and knowledge of button battery ingestion symptoms. There is limited information available about parent and caregiver perspectives towards button battery safety. Identifying the areas where increased education is required is important for informing safety campaigns and delivering targeted education. This study aimed to examine parent and caregiver elemental perspectives on button battery safety. One hundred and seventy-four parents and caregivers of children aged 0 to 5 completed a cross-sectional online survey. Distribution occurred via social media. The survey contained multiple-choice questions pertaining to button battery perspectives, and one open-ended question. Respondents recognized the dangers of button battery ingestion, yet only 37% reported being familiar with button battery ingestion symptoms. While 68% knew of household items containing button batteries, only 21% were aware of product recall information sources. Approximately 64% understood immediate post-ingestion steps and 17% found current safety labels unsatisfactory. In an open-ended question, parents and caregivers provided comments about button battery safety that revealed five broad themes; supervision and education; safe storage of button batteries in the home; ensuring children cannot access button batteries; disposing of button batteries safely; and avoiding purchasing items containing button batteries. This study provides a foundation for ongoing investigation of parent and caregiver perspectives on button battery home safety.

Solid waste management is a global issue that affects every individual living in the world directly or indirectly. Failing to manage the waste properly will cause harm on public health, our natural environment, and even our happiness and prosperity. When asked about the reason behind the failure of third time plastic ban in Bhutan, one of the Bhutanese said it’s because of the lack of cooperation from public to support the move of government. Clean Bhutan, a non-governmental organization (NGO) that aims Zero Waste Bhutan by 2030, has collected around 5,900 metric tons of waste from December 2014 to February 2018. This project will create some awareness regarding the management of waste at individual level when people come in contact with the family of the researcher. It also talks abot how waste management and biodiversity conservation can go side by side.

Recent technological advancements in conservation genetics and genomics have resulted in diverse tools for aiding conservation of species. The precision and resolution of high throughput sequencing technologies provide valuable insights to aid conservation decisions, but these technologies are often financially unfeasible or unavailable in resource constrained countries. Inter-Simple Sequence Repeat (ISSR) markers, when combined with sensitive automated detection systems, provide a simple, cheap means to investigate genetic diversity and discriminate closely related species. Here we apply this technology to assess genetic diversity and taxonomic delimitation in the Encephalartos eugene-maraisii species complex, a highly threatened, taxonomically dubious group of cycads in South Africa. Silica dried cycad leaflets were extracted using the Oktopure robot employing Sbeadex chemistry and amplified with fluorescently tagged ISSR primers. Band presence was scored with an ABI 3130 genetic sequencer under three different fluorescence cut-off values. Phenetic analyses were performed in NTSYS software while Bayesian analysis was performed in STRUCTURE, and haplotype network analysis, AMOVA and Tajima’s D statistic was computed with PopART. Our analyses support taxonomic singularity of E. dyerianus, E. dolomiticus and E. eugene-maraisii. Relationships between E. nubimontanus and E. cupidus remain uncertain. E. middelburgensis samples showed no clustering but had poor amplification success. This study demonstrated the suitability of automated ISSR fingerprinting as a method for plant conservation studies, especially in resource-constrained countries.

The once-held wisdom of the supreme efficiency of one-way streets has been gradually sup-planted by the perceived sustainability of two-way streets in the design of livable cities that prioritizes the safety of pedestrians and thriving of local businesses. However, it is rarely dis-cussed on whether one-way street conversions have truly improved the long-term traffic effi-ciencies on urban street networks, as conflating socioeconomic factors such as vehicular popula-tion growth and induced travel demand may render empirical analysis inconclusive. In this study, microscopic traffic simulations implemented on SUMO platform was performed to ana-lyze the effect of street conversion in Downtown Brickfields, Kuala Lumpur. This approach can control and standardize travel demand in both one-way and two-way street networks, and would therefore give a fairer evaluation by precluding all socioeconomic factors. It was found that one-way streets do not necessarily improve the traffic efficiency of the network, as it is very dependent on the traffic scenario evolution over time. One-way streets perform better at the on-set of traffic congestion due to its higher capacity, but on average, the 4-fold longer travel times that made it harder to clear traffic by getting vehicles to their destinations compared to two-way streets. As time progresses, congestion in one-way streets may become twice as worse compared to two-way streets. This study may contribute to a more holistic assessment of traffic circulation plan designed for smart and livable cities

Among the many Lysosomal Storage Disorders (LSDs) that would benefit from the establish-ment of novel cell models, either patient-derived or genetically engineered, is Mucopolysaccha-ridosis type II (MPS II). In fact, even though a specific therapeutic approach does exist for this disorder (Enzyme Replacement Therapy, ERT, with recombinant human IDS) and haematopoiet-ic stem cell transplantation (HSCT) may also hold promise whenever the disorder is diagnosed soon enough, both approaches have their own drawbacks. Here we present our results on the establishment and characterization of two MPS II pa-tient-derived stem cell line(s) from deciduous baby teeth. To the best of our knowledge, this is the first time a stem cell population is isolated from LSD patient samples obtained from the oral cavity. Taking into account our results on the molecular and biochemical characterization of those cells and our first insights on their subcellular MPS phenotype, we consider these cells will be a valuable tool for both pathophysiological assessments and drugs screenings. Ultimately, we believe patient-derived dental pulp stem cells (DPSC) may represent a feasible alternative to induced pluripotent stem cells (iPSC) in many labs with standard cell culture con-ditions and limited (human and economic) resources.

We introduce linear probing hashing schemes that construct a hash table of size $n$, with constant load factor $\alpha$, on which the worst-case unsuccessful search time is asymptotically almost surely $O(\log \log n)$. The schemes employ two linear probe sequences to find empty cells for the keys. Matching lower bounds on the maximum cluster size produced by any algorithm that uses two linear probe sequences are obtained as well.

In 2020 the world experienced the threat of the COVID-19 epidemic, as seniors and chronic disease patients typically try to reduce their exercise and social activities to avoid increasing the risk of infection, which could lead to increased loneliness and even many diseases. This research combining golf croquet games with AIoT companion robots constructs a home-based intelligent exercise system thus uses the Technology Acceptance Model (TAM), deduces users’ intention to use this system based on perceived usefulness and perceived ease of use, and adds the needs of love and belonging, esteem, cognitive, aesthetic, and self-actualization in Maslow’s needs theory to conduct system needs analysis. The analysis results show that participants have a high level of acceptance of this system, believing that it is easy to learn and operate, can increase interaction with others, also found that this system can improve self-confirmation, satisfying the third for knowledge, feeling happy, and self-actualization needs are easier to fulfill. In the future, we shall collect and record the seniors in the process of use, so as to find out their health problems as soon as possible, expand their daily life through this exercise, and achieve the goal of happy living and health care.

Organophosphate pesticides are used in large quantities. However, they exhibit toxic effects on non-target organisms. Dimethoate and its oxo-analog omethoate inhibit acetylcholinesterase and are toxic for mammals. Moreover, they show extreme toxicity for bees. Once in the environment, they undergo chemical transformations and decomposition. We show that dime-thoate and omethoate decompose rapidly in alkaline aqueous solutions (half-lives 5.7 and 0.89 days) but are highly stable in acidic solutions (half-lives 124 and 104 days). These differences are explained using quantum chemical calculations, indicating that a weaker P–S bond in omethoate is more susceptible to hydrolysis, particularly at a high pH. The toxicity of these pesticides solutions decreases over time, indicating that no or very little highly toxic omethoate is formed during hydrolysis. Presented data can be used to predict dimethoate and omethoate concentrations in contaminated water depending on pH. Presented results suggest that alkaline hydrolysis of organophosphates has an advantage over other techniques for their removal since there is no risk of omethoate accumulation and increased toxicity of contaminated water.

Large-scale land cover plays a crucial role in global resource monitoring and management, as well as research on sustainable development. However, the complexity of the mapping process, coupled with significant computational and data storage requirements, often leads to delays between data processing and product publication, creating challenges for dynamic monitoring of large-scale land cover. Therefore, improving the efficiency of each stage in large-scale land cover mapping and automating the mapping process is currently an urgent and critical issue that needs to be addressed. We propose a high-performance automated large-scale land cover mapping framework(HALF) that introduces high-performance computing technology to the field of land cover production. HALF optimizes key processes, such as automated sample point extraction, sample-remote sensing image matching, and large-scale classification result mosaic and update. We selected several 10°×10° regions globally and the research makes several significant contributions:(1)We design HALF for land cover mapping based on docker and CWL-Airflow, which solves the heterogeneity of models between complex processes in land cover mapping and simplifies the model deployment process. By introducing workflow organization, this method achieves a high degree of decoupling between the production models of each stage and the overall process, enhancing the scalability of the framework. (2)HALF propose an automatic sample points method that generates a large number of samples by overlaying and analyzing multiple prior products, thus saving the cost of manual sample selection. Using high-performance computing technology improved the computational efficiency of sample-image matching and feature extraction phase, with 10 times faster than traditional matching methods.(3)HALF propose a high-performance classification result mosaic method based on the idea of grid division. By quickly establishing the spatial relationship between the image and the product and performing parallel computing, the efficiency of the mosaicking in large areas is significantly improved. The average processing time for a single image is around 6.5 seconds.

This paper proposes a single-stage asymmetrical half-bridge fly-back (AHBF) converter with resonant mode using dual-mode control. The presented converter has an integrated boost converter and asymmetrical half-bridge fly-back converter and operates in resonant mode. The boost-cell always operates in discontinuous conduction mode (DCM) to achieve high power factor. The presented converter operates simultaneously using a variable-frequency-controller (VFC) and pulse-width-modulation (PWM) controller. Unlike the conventional single-stage design, the intermediate bus voltage of this controller can be regulated depending on the main power switch duty ratio. The asymmetrical half-bridge fly-back converter utilizes a variable switching frequency controller to achieve the output voltage regulation. The asymmetrical half-bridge fly-back converter can achieve zero-voltage-switching (ZVS) operation and significantly reduce the switching losses. Detailed analysis and design of this single-stage asymmetrical half-bridge fly-back converter with resonant mode is described. A wide AC input voltage ranging from 90 to 264 Vrms and output 19 V/ 120 W prototype converter was built to verify the theoretical analysis and performance of the presented converter.

Natural capital is the wealth of nations that give them the economic status they represent. Worldwide, vulnerable people depend on natural capital for employment, salaries, wealth, and livelihoods and, in turn, determine the developmental index of the nation to which they belong. The availability of ecological services is crucial for clean water and air, food and fodder, and agricultural development. In this short commentary, we have tried to sum up the ideas and discussions over natural capital's role in ascribing economic status to countries. We have discussed how the prosperity of humans is intertwined with the services ecosystems provide and how poor natural resource management (NRM) has adversely cost human well-being. The paper concludes that to ensure the current and future human well-being, an in-depth understanding of the services ecosystems provide, is essential.

Androgen deprivation therapy (ADT) has been the mainstay of prostate cancer (PCa) treatment, with success in developing more effective inhibitors of androgen synthesis and antiandrogens in clinical practice. However, hormone deprivation and AR ablation have caused an increase in ADT-insensitive PCas’ associated with poor prognosis. Resistance to ADT arises through various mechanisms, and most castration-resistant PCas’ still rely on the androgen axis, while others become truly androgen receptor (AR)-independent. Our research identified the human tousled-like kinase 1 (TLK1) as a crucial early mediator of PCa cell adaptation to ADT, promoting androgen-independent growth, inhibiting apoptosis, and facilitating cell motility and metastasis. Although explicit, the growing role of TLK1 biology in PCa has remained under-represented and elusive. In this review, we aim to highlight the diverse functions of TLK1 in PCa, shed light on the molecular mechanisms underlying the transition from androgen-sensitive (AS) to an androgen-insensitive (AI) disease mediated by TLK1, and explore potential strategies to counteract this process. Targeting TLK1 and its associated signaling could prevent PCa progression to the incurable metastatic castration-resistant PCa (mCRPC) stage and provide a promising approach to treating PCa.

Any quantization maps linearly functions on a phase space to symmetric operators in a Hilbert space. Covariant integral quantization combines operator-valued measure with symmetry group of the phase space. Covariant means that the quantization map intertwines classical (geometric operation) and quantum (unitary transformations) symmetries. Integral means that we use all ressources of integral calculus, in order to implement the method when we apply it to singular functions, or distributions, for which the integral calculus is an essential ingredient. In this paper we emphasize the deep connection between Fourier transform and covariant integral quantization when the Weyl-Heisenberg and affine groups are involved. We show with our generalisations of the Wigner-Weyl transform that many properties of the Weyl integral quantization, commonly viewed as optimal, are actually shared by a large family of integral quantizations.

Sensor fusion algorithms and models have been widely used in recent times. Although research evidence has informed the use of sensor fusion models in diverse applications, there is room for improvement, especially in home-based health monitoring applications which require less supervision and technical knowledge of users. The present work compares data mining-based fusion software packages such as RapidMiner Studio, Anaconda, Weka, and Orange, and proposes a data fusion framework suitable for in-home applications. 574 privacy-friendly (binary) images and 1,722 datasets gleaned from thermal and Radar sensing solutions respectively, were fused using the software packages on instances of homogeneous and heterogeneous data aggregation. Experimental results indicated that the proposed fusion framework achieved an average Classification Accuracy of 84.7% and 95.7% on homogeneous and heterogeneous datasets respectively, with the help of data mining and machine learning models such as Naïve Bayes, Decision Tree, Neural Network, Random Forest, Stochastic Gradient Descent, Support Vector Machine, K-Nearest Neighbours and CN2 induction. Further evaluation of the sensor data fusion framework based on cross validation of features indicated average values of 94.4% for Classification Accuracy, 95.7% Precision and 96.4% for Recall.

The practice of telework, remote work, and working from home has grown significantly across the pandemic era (2020+). These practices offer new ways of working but come with a lack of clarity as to the role it plays in supporting the wellbeing of staff. (1) Background: the purpose of this study is to examine the current literature on wellbeing outcomes and effects of telework; (2) Methods: this study adopts a systematic literature review from 2000-2022 using the PRISMA approach and thematic analysis guided by the United Nations Sustainable Development Goals (Wellbeing, Decent Work, Gender Equality, and Inclusive Production); (3) Results: it was evident that there is a lack of clarity on the actual effects of telework on employee wellbeing, but it appeared that it had a generally positive effect on short-term wellbeing of staff, and created more flexible and proactive work design opportunities; (4) Conclusions: there is a need for more targeted research into work designs that support wellbeing and productivity of staff, and consider the environmental sustainability changes from reduced office and onsite work and increased working from home.

Abstract Background: Premature babies have a greater risk for having health issues after being discharged from the hospital whilst the mother ability to provide premature baby care still has many issues as well. Interventions are needed to be given to mothers at home to improve the ability of mothers to care their premature babies. Methods: Search for articles used the bolean operator of “or” and “and” with the keywords used were “preterm or premature”, “intervention or program”, and “mother and home”. Data based used were Sciencedirect, Ebscohost, PubMed, SAGE, Proquest and Scopus with inclusion criteria using full text in English from 2018 to 2021. There were 428 articles obtained, the articles were then screened by reading the main focus of articles with paying attention to the topic and the suitability of article content and we obtained 13 suitable articles. Results: The interventions at home carried out for mothers and premature babies were divided into two namely the follow-up interventions from the hospital and the interventions carried out at the patient's home. Seven articles about research of interventions that were as a combination from hospital intervention with follow-up hospital intervention plus five full interventions at the patient's home. Interventions were provided through home visits (12 articles) and by telephone (1 article). The results of the article analysis resulted in 4 main themes of intervention for mothers and premature babies, they were health education, counceling, support, and care for premature babies. Conclusion: Quality care is essential for the best health, growth and development of premature babies. Interventions need to be carried out by health workers to ensure the readiness and ability of mothers to care for their babies. Maternal readiness and abilities can be improved by providing health education, counseling, support and care for premature babies.

In this paper, thin plate theory and moderately thick plate theory are proposed for analyzing the bending problem of rectangular plates with stepped thickness resting on elastic half-space foundation. The ground reaction is considered as an unknown coefficient and the hypothesis of Winkler foundation model and two-parameter ground model is eliminated in this method, so as to obtain the law of internal force distribution of the plate and the distribution law of contact reaction force between the stepped rectangular plate and foundation. The stepped rectangular plate is divided into upper and lower plates, and thin plate theory and moderately thick plate theory are used to obtain the analytical solution. The obtained analytical solutions in this paper are compared with results reported in other publications to verify the accuracy of this method. The effects of the elastic modulus and dimensions of the plate, and theory of plate are also considered. The analytical solutions show that it is feasible to decompose the stepped rectangular plate into two plates for analyzing the bending properties of stepped rectangular plate, and this method provide a reference for the study of multilayer stepped rectangular plates.

Opera and oratorio overtures exist in an indeterminate state between purely symphonic and dramatic music. While they can be and often are extracted for symphonic programs, they are ultimately tied to the story to which they grant the audience a preview of the story and music yet to come. Those that are easily extracted are so independent due to their structure, one well known to the symphony: the sonata form. In studying overtures from the 19^th century, however, one can trace a decline of the sonata form overture for one that is more subservient to the dramatic story soon to follow it. In this paper, three representatives of the early, mid and late period of the highlight this steady shift away from sonata form. Using Hepokoski and Darcy’s Elements of Sonata Theory: Norms, Types, and Deformations in the Late-Eighteenth-Century Sonata, I will categorize these overtures into one of the five sonata types listed therein. The increasing number of deformations as one moves through the overtures chronologically will illustrate the deliberate decline of use of the sonata form for the overture in favor of a clearer reflection of the upcoming story.

This manuscript presented an autonomous home farm for predicting metrological characteristics that can not only automate the process of growing crops but also, due to a neural network, significantly increase the productivity of the farm. The developed farm monitors and manages the following indicators: illumination, soil PH, air temperature, earth temperature, air humidity, CO2 concentration, and soil moisture. The presented farm can also be considered as a device for testing various weather conditions to determine the optimal temperature characteristics for different crops. This farm as a result is completely autonomous grows tomatoes at home.

We still do not have satisfactory answers about the inflationary and accelerating expansions of the universe, the missing mass problem, and the origins of the four fundamental forces and the quantum phenomena. Here, we introduce a new model of matter and space and a postulate on a constant of motion, and then show that an equation of motion derived from the constant of motion could provide new understandings of the above problems. For example, we show that there is a natural inflation scenario and that the co-moving distance to the closest accelerating supernova is clearly given as $c/(\sqrt{3} H)$ ($\sim$8.1 billion ly). In addition, we show that, in a system including a proton and an electron, the equation of motion has eight acceleration terms, some of which are suspected to be responsible for the four fundamental forces and the galaxy rotation anomaly. From further discussion, we conjecture that in order to understand the gravitational and strong interactions and the quantum phenomena, it is necessary to consider the expansion of the universe. The lensing mass distribution is explained, based on another postulate on a method of representing superposition.

Dwindling Economy is otherwise known as depression economy or economy depression interchangeably and/or recess economy. It is an occurrence wherein an economy is in a state of financial turmoil, often the result of a period of negative activity based on the country’s Gross Domestic Product (GDP) rate. However, this has become a global phenomenon; a good example of a necessitating factor is the global oil crash market and pandemics virus (Covid-19) ravaging the human race. That has conjointly led to the decline in the GDP growth per capital of a country; which forces degradation in the performances of economic sectors, retrenchment of staff and wrapping-up of industries. It is a lot worse than a recession, with GDP falling significantly, and lasts for periods of time. Pen ultimately, Nigeria has been in deteriorating financial state for years; her economy in the last few years has been going through some turbulence. A country that had recorded an average GDP growth of 6.5 per cent, one of the highest in the world less than a decade ago, is now projected to grow at about 2.3 per cent in 2016. It is no longer news that Nigeria's economy is experiencing total collapse and if nothing is done to put the peg in the right spot something worse than what we are witnessing may soon be on sight. Based on some of all these issues and other, Nigeria was said to be technically recess.In this paper, efforts were made to explore the state of the Nigeria economy in the last 36 years (1981-2017) and correlate it with the recent phenomena that conjointly constitute to its dwindling economy. Our comprehensive and elusive literary survey and extemporariness suggested way forwards to rescue the raveling situation of Nigeria dwindling economics, if not providing lasting solution but temporarys’ one that could stand test of time.

The proposed research methodology aims to design a generally implementable framework for providing a house owner/member with the immediate notification of an on-going theft (unauthorized access to their premises). For this purpose, a rigorous analysis of existing systems was undertaken to identify research gaps. The problems found with existing systems were that they can only identify the intruder after the theft, or cannot distinguish between human and non-human objects. Wireless Sensors Networks (WSNs) combined with the use of Internet of Things (IoT), Cognitive Internet of Things, Internet of Medical Things, and Cloud Computing are expanding smart home concepts and solutions, and their applications. The primary objective of the present research work was to design and develop IoT and cloud computing based smart home solutions. In addition, we also propose a novel smart home anti-theft system that can detect an intruder, even if they have partially/fully hidden their face using clothing, leather, fiber, or plastic materials. The proposed system can also detect an intruder in the dark using a CCTV camera without night vision facility. The fundamental idea was to design a cost-effective and efficient system for an individual to be able to detect any kind of theft in real-time and provide instant notification of the theft to the house owner. The system also promises to implement home security with large video data handling in real-time.

The Smartphone industry has expanded significantly over the last few years. According to the available data, each year, a marked increase in the number of devices in use is observed. Most consumers opt for Smartphones due to the extensive number of software applications that can be downloaded on their devices, thus increasing their functionality. However, this growing trend of application installation brings an issue of user protection, as most applications seek permission to access data on a user’s device. The risks this poses to sensitive data is real to both corporate and individual users. While Android has grown in popularity, this trend has not been followed by the efforts to increase the security of its users. This is a well-known set of problems, and prior solutions have approached it from the ground up; that is, they have focused on implementing reasonable security policies within the Android’s open-source kernel. While these solutions have achieved the goals of improving Android with such security policies, they are severely hampered by the way in which they have implemented them. In this work, a framework referred to as CenterYou is proposed to overcome these issues. It applies a pseudo data technique and a cloud-based decision-making system to scan and protect Smartphone devices from unnecessarily requested permissions by installed applications and identifies potential privacy leakages. The current paper demonstrated all aspects of the CenterYou application technical design. The work presented here provides a significant contribution to the field, as the technique based on pseudo data is used in the actual permissions administration of Android applications. Moreover, this system is user and cloud-driven, rather than being governed by over-privileged applications.

The density functional theory was used to explore the structural, electronic, dynamical, and thermoelectric properties of a VIrSi Half-Heulser (HH) alloy. The minimum lattice constant of 5.69 ( ̊A) was obtained for VIrSi alloy. Besides, the band structure and the projected density of states for this HH alloy were calculated, and the gap between the valence and conduction bands was noted to be 0.2 eV. Also, the quasi-harmonic approximation was used to predict the dynamical stability of the VIrSi HH alloy. At 300 K, the Seebeck Coefficient of 370 and -270 μV.K−1., respectively, was achieved for the p and n-type doping. From the power factor result, the highest peak of 18 X 1011W/cm.K2 is obtained in the n-type doping. The Figure of Merit (ZT) result revealed that VIrSi alloy possesses a high ZT at room temperature, which would make VIrSi alloy applicable for thermoelectric performance.

Background: Nursing home residents (NHRs) have special needs and may experience reduced functionality, higher sedentary behavior time (SBT) and decreased physical activity (PA). This study aimed to characterize NHRs based on SBT, PA, and functional performance (FP), and to identify associations between these factors. Methods: Cross-sectional study with 65 NHRs aged ≥60, evaluated by accelerometer (SBT, PA) and the following tests: Timed Up and Go (TUG), Short Physical Performance Battery (SPPB), Barthel Index (BI), and Mini-Mental State Examina-tion (MMSE). Health-related variables and anthropometry were assessed. The FP (TUG, SPPB, BI), SBT, PA intensities were used for K-means clustering analysis. Results: The cluster analysis identified: C1 – better FP, shorter SBT, and longer time in PA intensities; C2 - lower FP, longer SBT, and shorter time in PA. In addition, C2 were older, with lower MMSE, lower body mass index, and walking aids use. The SBT showed a negative weak correlation with BI. The moderate PA (MPA) was moderately correlated with the SPPB and strongly correlated with the TUG and BI. Conclusions: MPA is strongly associated with better FP and independence. NHRs have dif-ferent physical and cognitive profiles, which indicates the need for personalized strategies to prevent disability and increase PA.

Parental stresses are normal responses to raising children. They are affected by stresses parents and children accumulate and bring to their interrelations. Background factors like economic difficulties or the relations between the parents may affect parental stresses as well as demographic and environmental factors like noise and access to urban parks. Most studies on parental stress are based on a verified psychological questionnaire. We suggest using frequency domain heart rate variability index (HRV) to measure parental stress enabling, by thus, the measurement of physiological aspects of stress and risk to health. Parental stress is measured as the difference between HRV accumulated at home while staying with the children and without the husband and HRV measured in the neighborhood while staying without the children and the husband. We use the index to compare differences among Muslim and Jewish mothers in exposure to maternal stress at their homes and to expose the factors that predict differences in maternal stress. We found that Muslim mothers suffer from home-related maternal stress while Jewish mother do not. Number of children and ethnically related environmental aspects predict differences in maternal stress between Muslim and Jewish mothers. Muslims' lower access to parks stems from lack of home garden and parks in their neighborhoods in the Arab towns but mainly by restrictions on Muslim women's' freedom of movement to parks. Despite differences in levels of noise at home and in the status of the mother in the household, these factors did not predict differences in parental stress. Instead, the study highlights the crucial role of greenery and freedom of movement to parks in moderating home-related maternal stress.

A Smart Home is characterized by the presence of a huge number of small, low power devices, along with more classical devices. According to the Internet of Things (IoT) paradigm, all of them are expected to be always connected to the Internet in order to provide enhanced services. In this scenario, an attacker can undermine both the network security and the user’s security/privacy. Traditional security measures are not sufficient, because they are too difficult to setup and are either too weak to effectively protect the user or too limiting for the new services effectiveness. The paper suggests to dynamically adapt the security level of the smart home network according to the user perceived risk level what we have called network sentiment analysis. The security level is not fixed, established by a central system (usually by the Internet Service Provider) but can be changed with the users cooperation. The security of the smart home network is improved by a distributed firewalling and Intrusion Detection Systems both to the smart home side as to the Internet Service Provider side. These two parts must cooperate and integrate their actions for reacting dynamically to new and ongoing threats. Moreover, the level of network sentiment detected can be propagate to nearby home networks (e.g. the smart home networks of the apartments inside a building) to increase/decrease their level of security, thus creating a true in-line Intrusion Prevention System (IPS). The paper also presents a test bed for Smart Home to detect and counteract to different attacks against the IoT devices,,Wi-Fi and Ethernet connections .

Home Security Systems are very important features of modern residential and office setups. This system is used to keep home safe from harmful gases, fire and intruders. It must be affordable, reliable and effective. In this paper, a GSM based home security system has been designed and implemented. The system consists of a GSM Module, MQ-2 smoke detector, Ultrasonic sonar sensor, LM35 temperature sensor, Arduino Uno and relay module. The MQ-2 smoke detector is used to detect harmful gases i.e. LPG, CH₄, CO, Alcohol, Smoke or Propane. Any of the harmful gases stated above is detected it will warn the owner by activating the buzzer and displaying a warning message on the LCD display. It will also send a SMS to the owner. Our system can also measure temperate and if the temperature is increased above a certain range it will compensate it by activating Air Conditioner through the relay module. The system will also send a SMS to the owner. It can also detect intruders using Ultrasonic sensor and warn us through buzzer, SMS and displaying message on the LCD. Our system is reliable as it has very fast response and cost effective and it has been developed using our own technologies.

Pachychoroid neovasculopathy (PNV) is a pachychoroid-spectrum disease. As blood circulation throughout the choroid may be involved in PNV pathogenesis, analysis using ultra-wide-field (UWF) fundus imaging is crucial. We evaluated choroidal thickness after half-fluence photodynamic therapy (PDT) combined with intravitreal aflibercept injection for PNV using UWF swept-source optical coherence tomography. Seventeen eyes with PNV that underwent half-fluence PDT with adjuvant single intravitreal aflibercept injection were analyzed. To compare choroidal thicknesses in the central and peripheral choroids, we set subfields <3, <9, and 9–18 mm from the fovea. The <9- and 9–18-mm subfields were divided into four quadrants. Choroidal thickness in each subfield decreased significantly after half-fluence PDT (P<0.001); this reduction was more pronounced in the central area. We also investigated the relationship between the dominant side of the deep choroidal veins that harbor choroidal vein efflux from the macula. When choroidal thickness in the supratemporal and infratemporal 9x9-mm subfields were evaluated, the ratio of choroidal thickness reduction was not significantly different between the dominant and non-dominant sides. The dominant side was not associated with the extent of choroidal thickness reduction in PNV. In conclusion, half-fluence PDT caused thinning of the entire choroid, especially in the central area, in PNV.

This paper investigates the problem of a relativistic Dirac half-integer spin free particle tunneling through a rectangular quantum-mechanical barrier. If the energy difference between the barrier and the particle is positive, and the barrier width is large enough, there is proof that the tunneling may be superluminal. For first spinor components of particle and antiparticle states, the tunneling is always superluminal regardless the barrier width. Conversely, the second spinor components of particle and antiparticle states may be either subluminal or superluminal depending on the barrier width. These results derive from studying the tunneling time in terms of phase time. For the first spinor components of particle and antiparticle states, it is always negative while for the second spinor components of particle and antiparticle states, it is always positive, whatever the height and width of the barrier. In total, the tunneling time always remains positive for particle states while it becomes negative for antiparticle ones. Furthermore, the phase time tends to zero, increasing the potential barrier both for particle and antiparticle states. This agrees with the interpretation of quantum tunneling that the Heisenberg uncertainty principle provides. This study’s results are innovative with respect to those available in the literature. Moreover, they show that the superluminal behaviour of particles occurs in those processes with high-energy confinement.

In contrast to physical sustainable measures carried out in homes, such as insulation, the installation of a Home Energy Management System (HEMS) has no direct and immediate energy-saving effect. A HEMS gives insight into resident behaviour regarding energy use. When this is linked to the appropriate feedback, the resident is in a position to change his or her behaviour. This should result in reduced gas and/or electricity consumption. The aim of our study is to contribute towards the effective use of home energy management systems (HEMS) by identifying types of homeowners in relation to the use of HEMS. The research methods used were a literature review and the Q-method. A survey using the Q-method was conducted among 39 owners of single-family homes in various Rotterdam neighbourhoods. In order to find shared views among respondents, a principal component analysis (PCA) was performed. Five different types of homeowner could be distinguished: the optimists, the privacy-conscious, the technicians, the sceptics, and the indifferent. Their opinions vary as regards the added value of a HEMS, what characteristics a HEMS should have, how much confidence they have in the energy-saving effect of such systems, and their views on the privacy and safety of HEMS. The target group classification can be used as input for a way in which local stakeholders, e.g. a municipality, can offer HEMS that is in line with the wishes of the homeowner.

Regional Climatic Comfort Index (CCI) deteriorated significantly due to the climate change and anthropogenic interference. Knowledge regarding the long-term temporal dynamics of CCI in typical regions should be strengthened. In this study, we analyze the temporal and spatial evolution of CCI from 1969 to 2018 in Guangdong Province, based on meteorological indicators, including heat, humidity, wind and cloth loading etc.. Additionally, the population exposure to climate unconformity was examined since 1990 with the help of population data. Our study found that: (1) the warming and humidifying of the summer climate served as the main driving force for the continuous deterioration of CCI, with the comfortable days decreased by 1.06d/10a and the extremely muggy days increased by 2.83d/10a; (2) spatially, the lowest climate comfortability concentrated in southwestern Guangdong with more than 50 uncomfortable days each year, while the climate comfortability in northeastern Guangdong tends to deteriorated whit higher rate, which can reach as high as 6d/10a; (3) in summer, the population exposure to uncomfortable climate highly centralized in the Pearl River Delta, Shantou, Jieyang, and the surrounding areas, and both area and population exposure showed increasing trends. Particularly, Shenzhen held the highest growth rate of population exposure with an increase rate of 2.94 million/10a; (4) although the discomfort distribution and deterioration rate vary across the province, the spatial heterogeneity of comfortability is diminishing in Guangdong Province. This study will provide scientific reference for regional urban planning, thermal environment improvement, local resident health risk analysis, and key strategy implementation, etc.

The lexical analysis of seminal policy-to-diplomacy documents from the socio-environmental discourse of the last fifty year agendas allowed examining the evolution of five themes: resources/waste, pollution, social and economic development, justice, and health. Contextual affinities were strongest between resources, pollution, and health and are linked to societal trends and pressures. On those grounds, the central role of resource stewardship according to nature’s physical limits is highlighted, and dedicated concepts, analytical frameworks, and methodologies with different degrees of sustainability are analyzed. To reframe the identified social and economic problems, the work proposes criteria and choices that (1) allow to compare the dynamics of socioecological states across the planet, (2) help matching the pace of socioecological change by addressing path dependencies through participation and engagement of communities, and (3) enable stakeholders to make trade-offs and take decisions in specific social, economic, political, and cultural contexts. The prioritization of resource justice and responsibility becomes a societal project : from Wellfare State to commonfare communities.

The non-contact patient monitoring paradigm moves patient care into their homes and enables long-term patient studies. The challenge, however, is to make the system non-intrusive, privacy-preserving, and low-cost. To this end, we describe an open-source edge computing and ambient data capture system, developed using low-cost and readily available hardware. We describe five applications of our ambient data capture system. Namely: (a) Estimating occupancy and human activity phenotyping; (b) Medical equipment alarm classification; (c) Geolocation of humans in a built environment; (d) Ambient light logging; and (e) Ambient temperature and humidity logging. We obtained an accuracy of 94% for estimating occupancy from video. We stress-tested the alarm note classification in the absence and presence of speech and obtained micro averaged F1 scores of 0.98 and 0.93, respectively. The geolocation tracking provided a room-level accuracy of 98.7%. The root mean square error in the temperature sensor validation task was 0.3°C and for the humidity sensor, it was 1% Relative Humidity. The low-cost edge computing system presented here demonstrated the ability to capture and analyze a wide range of activities in a privacy-preserving manner in clinical and home environments and is able to provide key insights into the healthcare practices and patient behaviors.

Carsharing has become increasingly popular in recent years as a sustainable transportation solution, offering individuals access to shared vehicles on a short-term basis. One-way carsharing, in particular, presents unique challenges due to its flexible nature, allowing users to pick up and drop off vehicles at different locations within a designated service area. This flexibility increases the service ridership but comes at the expense of vehicle imbalance among the stations, as some stations may have excess vehicles while other stations have vehicle shortages. Therefore, carsharing companies need to decide on strategies to ensure a balanced distribution of vehicles among the stations. This is essential as unbalanced vehicle distribution can lead to the unavailability of vehicles when needed or, conversely, result in an increased number of unnecessary rebalancing trips, thereby exacerbating traffic congestion and environmental pollution. Such issues can potentially undermine the overall contribution of carsharing to urban sustainability. To this end, this paper reviews the vehicle imbalance problem that arises in this field and the solution algorithms that solve them.

The control of Porcine Reproductive and Respiratory Syndrome (PRRS) is still a major issue worldwide in the pig farming sector. Despite extensive research efforts and the practical experience gained so far, the syndrome still heavily affects farmed pigs worldwide and challenges established beliefs in veterinary virology and immunology. The clinical and economic repercussions of PRRS are based on concomitant, additive features of virus pathogenicity, host susceptibility and influence of environmental, microbial and non-microbial stressors. This makes a case for integrated, multi-disciplinary research efforts in which the three types of contributing factors are critically evaluated toward the development of successful disease control strategies. These could be definitely eased by the definition of reliable markers of disease risk and virus pathogenicity. As for the host’s susceptibility to PRRSV infection and disease onset, the roles of both innate and adaptive immune responses are still ill-defined. In particular, the overt discrepancy between passive and active immunity and the uncertain role of adaptive immunity vis-à-vis an established PRRSV infection should prompt the scientific community to the development of novel research schemes, in which apparently diverging and contradictory findings could be reconciled, and eventually brought to a satisfactory conceptual framework.

Human cytomegalovirus (HCMV) is a β-herpes virus that is a significant pathogen within immune compromised populations. HCMV morbidity is induced through viral dissemination and inflammation. Typically, viral dissemination is thought to follow Fenner’s hypothesis where virus replicates at the site of infection, followed by replication in the draining lymph nodes, and eventually replicating within blood filtering organs. Although CMVs somewhat follow Fenner’s hypothesis, they deviate from it by spreading primarily through innate immune cells as opposed to cell free virus. Also, in vivo CMVs infect new cells via cell to cell spread and disseminate directly to secondary organs through novel mechanisms. We review the historic and recent literature pointing to CMV’s direct dissemination to secondary organs and the genes that it has evolved for increasing its ability to disseminate. We also highlight aspects of CMV infection for studying viral dissemination when using in vivo animal models.

The fact that Thailand’s energy policy has set a new renewable energy target of 30% of total final energy consumption by 2036. It also has the potential of solar energy and community demands in remote areas. However, most of the renewable energy technology will still be able to achieve renewable energy goals, similar to the case of the national policy that promotes Solar Home System (SHS) in remote areas, lack of good handling. Therefore, achieving the goal of the renewable energy policy should be in position using the right strategy. This article presents the result of a case study in the Akha upland community, northern Thailand, where we used the mixing method and factor analysis to analyze strategies for SHS related criteria. The key scopes and challenge included bottom-up planning concepts and subsidies from expert persons, while contributions to factors have an impact on developing sustainable SHS, include the creating approval of SHS technologies, developing of SHS management, promoting of SHS technologies, and supporting of SHS policies, respectively. Mainly, social factors provide positive effects, which thus influence the sustainable development of process SHS in terms of the creation of approval. Furthermore, there should be managed appropriately for each community, for the positive imagery of solar power.

This code provides computational facilities to simulate current versus time during the charging of Li-ion cells at desire constant voltage by considering multiscale physical phenomena. This code only considers a powder of active materials (at microscale or nanoscale) and a small part of electrolyte around it as a half cell. Then it is extended to a complete cell by applying correct boundary conditions. This code is very useful by modifying code parameters to understand the effect of the complex shape of active materials powder (surface area and powder size), kind of electrolyte, and the applied voltages on the charging response of Li-ion cell. As a summary, a microscale approach to the design of Li-ion cells has been provided via this code.

The new observations, including the fastest star, the circular velocity curve of the Milky Way and the fast galaxy bar, should imply that the mass of the center of the Milky Way is almost 10¹¹ times the mass of the Sun.

Quite a number of new metered parking systems have been introduced in recent years by the local authorities of various spa towns in Poland in connection with home zone conversion projects. The traffic signs posted in these locations were limited to the beginning and end of the demarcated parking area. Traffic circle (TC) is an example of traffic calming measures (TCM) used in home zones to slow down the traffic (case study – home zone in a small spa village). This article presents the results of a study investigating the speed reductions obtained with a home zone and traffic circle used as traffic calming measures. The indispensable speed surveys were carried out in relation to this study in two periods: in summer when the streets are crowded with tourists and in September with little pedestrian traffic. Two research hypotheses were formulated as part of the speed data analysis to verify the slowing effect of traffic circle and the relevance of traffic circles design parameters and location, road function and the surrounding streetscape. For each hypothesis statistical analyses were carried out using two nonparametric tests: two-sample Kolmogorov–Smirnov test and median test. The third research hypothesis formulated in this study was related to sustainable development factors related to fuel consumption and traffic-related air pollution including carbon dioxide, carbon monoxide, nitrogen oxide and hydrocarbons. This hypothesis was verified by estimating the amount of air pollution in the home zone under analysis in three different situations (scenarios): in summer with the travel speed reduced by pedestrian traffic to ca. 8–10 km/h and in September with a small number of pedestrians and 20–25 km/h resulting speed between traffic circles, reduced at traffic circle, and in a theoretical 30 km/h zone with 25–30 km/h assumed speed between traffic circles, dropping at traffic circle. These analyses confirmed the appropriateness of traffic circle as a home zone traffic calming measure, as long as its design is based on a detailed analysis of the relevant factors, including location, road function and the surrounding streetscape.

IoT system becomes hot topic nowadays for smart home, IoT helps devices to communicate together without human intervention inside home, so it is offering many challenges. A new smart home IoT platform powered using electromagnetic energy harvesting is proposed in this paper. It contains a high gain transmitted antenna array and efficient circular polarized array rectenna system to harvest enough power from any direction to increase life time of the batteries used in IoT system. Optimized energy consumption, the software with adopting the Zigbee protocol of the sensor node and low power microcontroller are used to operate in lower power modes. The proposed system has an 84.6 days lifetime which is approximately 10 times the lifetime for similar system. On the other hand, the proposed power management circuit operated at 0.3 V DC to boost the voltage to ~3.7V from radio frequency energy harvesting and manage battery level to increase the batteries lifetime. A predictive indoor environment monitoring system is designed based on a novel hybrid system to provide a non-static plan, approve energy consumption and avoiding failure of sensor nodes in smart home.

Stable half-sandwich iron(II) dihalido complexes of the type [Fe(5-Cp’)X2] are extremely scarce, being limited to congeners containing the bulky C5H2-1,2,4-tBu3 ligand. We have extended this to homologues [Fe(5-Cp*)X2] (X = Cl – I) containing the particularly popular C5Me5 (Cp*) ligand. Corresponding ionic compounds ER4[Fe(5-Cp*)X2] are easily accessible from FeX2, MCp* (M = Li, K) and a suitable halide source R4EX (E = N, P) in THF. The new compounds NnPr4[Fe(5-Cp*)X2] (X = Cl, Br), NnPr4[Fe(5-Cp*)BrCl] and PPh4[Fe(5-Cp*)X2] (X = Cl, Br, I) have been structurally characterised by single-crystal X-ray diffraction. NnPr4[Fe(5-Cp*)Cl2] reacts readily with CO to afford [Fe(5-Cp*)Cl(CO)2], indicating the synthetic potential of ER4[Fe(5-Cp*)X2] in FeCp* half-sandwich chemistry.

The growing demand in industrial and biotechnological settings for more efficient enzymes with enhanced biochemical features, particularly thermostability and thermotolerance, necessitates a timely response. Renowned for their versatility, thermostable enzymes, offer significant promise across a range of applications, including agricultural, medicinal, and biotechnological domains. This comprehensive review summarizes the structural attributes, catalytic mechanisms, and the relationships between structure and function of two major classes of thermostable enzymes: α-amylases and laccases. These enzymes serve as valuable models for understanding the structural basis of protein thermostability. Commercial significance of these enzymes and researchers' interest in further optimization and innovation, this article can greatly contribute to ongoing research on thermostable enzymes and aiding industries in optimizing production processes. It also give insights to the exploration of suitable strategies and factors for enhancing thermostability, resulting in heightened multipronged stability and notable enhancements in the enzymes’ industrial applicability.

This Paper delves into the critical role played by fossil fuel-based polymers in promoting United Nations Sustainable Development Goals (SDGs) in the face of challenges brought about by swift population growth, suburbanization, and mechanization. It sheds light on the environmental and energy security recompences of converting plastic waste into biofuels and other valuable energy resources through state-of-the-art processes such as thermochemical conversion and pyrolysis. Besides, the research investigates the utilization of polymers in solar energy, energy storage, and low carbon transportation, emphasizing the inevitability of a dual approach that combines advancements in bio-based polymers and recycling technologies. It highlights the significance of collaborative endeavors involving governments, industries, and communities to overcome the technical, economic, and regulatory complications in transitioning towards a sustainable and circular plastic economy. Eventually, it showcases the potential of fossil fuel-based polymers in fostering a sustainable energy landscape, conducive to decarbonization efforts, and endorsing environmental sustainability.

We elucidate the versatility of intriguing symmetry and asymmetry phenomena outside and inside black holes. For description of the test particle (planet and photon) motion it is used the Kerr-Newman metric of the rotating and electrically charged black hole. In particular, it is demonstrated the symmetry and asymmetry of the one-way Einstein-Rosen bridge inside black hole toward and through the plethora of endless and infinite universes.

Cognitive impairment affects 34-65% of People with Multiple Sclerosis (PwMS), significantly impacting their quality of life. Clinicians routinely address cognitive deficits with in-clinic neuro-behavioural interventions, but accessibility issues exist. Telerehabilitation is a promising solution that utilises digital tools for home-based cognitive remediation. This narrative review assessed the feasibility and efficacy of cognitive telerehabilitation in PwMS, identifying 13 relevant studies. Regarding the feasibility of cognitive telerehabilitation, evidence shows adherence rates are generally good, although, surprisingly, not all studies reported a measure of compliance with the cognitive training explored. Considering the efficacy of different rehabilitative techniques on cognitive performance of PwMS, findings are generally inconsistent, with only one study reporting consistently positive results. A range of methodological limitations are reported as potential factors contributing to the variability of results. Overcoming some of these issues will be key. Upcoming research is necessary to determine optimal intervention approaches, long-term effects of rehabilitation, and how to best integrate the use of telerehabilitation into routine clinical practice. By exploiting digital tools in the best way and addressing methodological concerns, home-based rehabilitation holds the potential for improving cognitive functions and enhancing the quality of life in PwMS.

The weakness of the dispersion-managed link combined with optical phase conjugation to compensate for optical signal distortion caused by chromatic dispersion and nonlinear Kerr effect of standard single mode fiber is its limited structural flexibility. We propose dispersion map that can simultaneously compensate for the distorted wavelength division multiplexed signal while increasing the configurational flexibility. Each residual dispersion per span (RDPS) in the former half of the proposed link is randomly determined, and in the latter half, the arrangement order of RDPS is the same as or inverted in the former half. We confirm that the dispersion maps in which the RDPS distribution pattern in the latter half is opposite to the arrangement order in the former half are more effective in compensation, and rather, the compensation effect is better than in the dispersion map of the conventional scheme. The notable result of this paper is that the increase of flexibility can be achieved through random arrangement of RDPS in the former half, and the compensation improvement can be achieved by through inverse arrangement in the latter half which make the distribution profile of each half link roughly symmetric with respect to the midway optical phase conjugator.

Goals: To use visual logistics for interpreting COVID-19 molecular and rapid antigen test (RAgT) performance, determine prevalence boundaries where risk exceeds expectations, and evaluate benefits of recursive testing along home, community, and emergency spatial care paths. Methods: Mathematica/open access software helped graph relationships, compare performance patterns, and perform recursive computations. Results: Tiered sensitivity/specificity comprise: T1) 90%/95%; T2) 95%/97.5%; and T3) 100%/≥99%, respectively. In emergency medicine, median RAgT performance peaks at 13.2% prevalence, then falls below T1, generating risky prevalence boundaries. RAgTs in pediatric ERs/EDs parallel this pattern with asymptomatic worse than symptomatic performance. In communities, RAgTs display large uncertainty with median prevalence boundary of 14.8% for 1/20 missed diagnoses, and at prevalence >33.3-36.9% risk 10% false omissions for symptomatic subjects. Recursive testing improves home RAgT performance. Home molecular tests elevate performance above T1, but lack adequate validation. Conclusions: Widespread RAgT availability encourages self-testing. Asymptomatic RAgT and PCR-based saliva testing present the highest chance of missed diagnoses. Home testing twice, once just before mingling, and molecular-based self-testing help avoid false omissions. Community and ER/ED RAgTs can identify contagiousness in low prevalence (<22%). Real-world trials of performance, cost-effectiveness, and public health impact could identify home molecular diagnostics as the optimal diagnostic portal.

The market of ready-to-eat salads is experiencing a noticeable growth in Europe. Since they are intended to be consumed without additional treatments, these ready-to-eat products are associated with a high microbiological risk. The aim of this work was to evaluate the microbiological quality and safety of ready-to-eat salads sold in widespread supermarket chains in Lazio, Italy, at the packaging date, during shelf-life and during home-refrigeration. The study also aimed to determine the differences between low, medium, and high cost products. Salmonella spp., L. monocytogenes were chosen as safety indicators as specified by European regulations while total aerobic mesophilic bacteria and Escherichia coli were chosen as quality indicators as suggested by national guidelines. Analyses were performed following the ISO standards and in parallel, for the evaluation of total aerobic mesophilic bacteria, with an alternative colorimetric system, the Micro Biological Survey method, in order to propose a simple, affordable and accurate alternative for testing the microbiological quality of products, especially suitable for small and medium enterprises and on-site analyses. The study revealed high, unsatisfactory, total bacterial loads in all analyzed samples at the packaging date and expiring date and a very high prevalence of Salmonella spp. (67%) regardless of the selected varieties and cost-categories; L. monocytogenes was instead not recovered aligning with the results obtained in other studies.

The market of ready-to-eat salads is experiencing a noticeable growth in Europe. The commercial success of these products is linked to the growing demand for fresh, healthy and nutritionally valuable products that can be consumed without preparation time and are perceived as safe and very high-quality products. Since they are intended to be consumed without additional treatments, these ready-to-eat products are associated with a high microbiological risk. The aim of this work was to evaluate the microbiological quality and safety of ready-to-eat salads sold in widespread supermarket chains in Lazio, Italy, at the packaging date, during shelf-life and during home-refrigeration. The study also aimed to determine the differences between low, medium and high cost products. Salmonella spp., L. monocytogenes were chosen as safety indicators as specified by European regulations while total aerobic mesophilic bacteria and Escherichia coli were chosen as quality indicators as suggested by national guidelines. Analyses were performed following the ISO standards and in parallel, for the evaluation of total aerobic mesophilic bacteria, with an alternative colorimetric system, the MBS method, in order to propose a simple, affordable and accurate alternative for testing the microbiological quality of products, especially suitable for small and medium enterprises and on-site analyses.

Antisense oligonucleotides (ASO), short single-stranded polymers based on DNA or RNA chemistries and synthesized in vitro, regulate gene expression by binding in a sequence-specific manner to an RNA target. The functional activity and selectivity in the action of ASOs largely depends on the combination of nitrogenous bases in a target sequence. This simple and natural property of nucleic acids provides an attractive route by which scientists can create different ASO-based techniques. Over the last 50 years, planned and realized applications in the field of antisense and nucleic acid nanotechnologies have produced astonishing results and posed new challenges for further developments, exemplifying the essence of the post-genomic era. Today the majority of ASOs are chemically modified and/or incorporated within nanoparticles to enhance their stability and cellular uptake. This review critically analyzes some successful cases using the antisense approach in medicine to address severe diseases, such as Duchenne muscular dystrophy and spinal muscular atrophy, and suggests some prospective directions for future research. We also examine in detail the elaboration of unmodified insect-specific DNA insecticides and RNA preparations in the areas of agriculture and forestry, a relatively new branch of ASO that allows circumvention of the use of non-selective chemical insecticides. When considering the variety of successful ASO modifications with an efficient signal-to-noise ratio of action, coupled with the affordability of in vitro oligonucleotide synthesis and post-synthesis procedures, we predict that the next half-century will produce a fruitful yield of tools created from effective ASO-based end products.

(1) Background: There is not much research about obesity in nursing homes although knowledge will help us to develop customized treatment plans and prevention strategies, which may help to decrease the burden for all persons involved. The objective of conducting this study was to describe the prevalence of obesity and the association between obesity and care problems in nursing home patients. (2) Methods: This study is a secondary data analysis of data collected in an annually performed cross-sectional study called “Nursing Quality Measurement 2.0”. A standardized and tested questionnaire was used to collect data. (3) Results: 1236 nursing home patients took part and 16.7% of them were obese. The multivariate logistic regression analysis results show that urinary incontinence is significantly associated with the presence of obesity (OR 2.111). The other care problems of pressure injuries, fecal and double incontinence, physical restraints, falls and pain were not associated with obesity. (4) Conclusion: The results indicate that, in the nursing home setting, health care staff should pay special attention to the patients’ nutritional and continence status and help patients maintain a normal, healthy weight. Conducting more studies with larger sample sizes is recommended, as this will allow differentiation among different obesity classes.

Physical activity is widely recognized as a biotherapy by WHO in the fight and prevention of bone diseases such as osteoporosis. It reduces the risk of disabling fractures associated with many comorbidities, and whose repair is a major public health and economic issue. Bone tissue is a dynamic supportive tissue that reshapes itself according to the mechanical stresses to which it is exposed. Physical exercise is recognized as a key factor for bone health. However, the effects of exercise on bone quality depend on exercise protocols, duration, intensity and frequency. Today, the effects of different exercise modalities on capillary bone vascularization, bone blood flow and bone angiogenesis remain poorly understood and unclear. As vascularization is an integral part of bone repair process, the analysis of the preventive and/or curative effects of physical exercise is currently very undeveloped. Angiogenesis-osteogenesis coupling may constitute a new way for understanding the role of physical activity, especially in fracturing or in the integration of bone biomaterials. Thus, this review aims to clarify the link between physical activities, vascularization and bone repair.

Lung cancer has been the leading cause of cancer death in the world. In addition to smoking, estrogen is supposed to play an important role in the lung cancer development because women have a higher proportion of adenocarcinoma than men. In the environment, there are many metabolites and wastes that mimic human estrogen structurally and functionally. As an oral contraceptive, 17α-ethynylestradiol (EE2) is released to wastewater after being utilized. Moreover, 4-nonylphenol (NP) exiting in the petrochemical products and air pollutants has estrogenic activity. In our study, 17β-estradiol (E2), EE2, and NP are administered to stimulate A549 male lung adenocarcinoma cells and H1435 female lung adenocarcinoma cells. The results demonstrate that EE2 and NP stimulate A549 and H1435 cells proliferation in a dose- and time-dependent trend. Both estrogen receptor α and β are activated simultaneously during these processes. Up-regulation of epidermal growth factor receptor (EGFR) and ERK expression is involved in response to estrogens. In conclusion, we first time report that EE2 and NP exert biotoxic effect to stimulate the proliferation of both male and female lung cancer cells in a dose- and time- response manner. New challenges from environmental hormones to lung cancer deserved further investigation.

Viruses are silent enemies that intrude and take control of the plant cell's machinery for their own multiplication. Infection by viruses and the resulting damage is still a major challenge in the agriculture sector. Plants have the ability to fight back, but the ability of viruses to counteract and mutate at a fast rate helps them to hide from the host response. Therefore, classical approaches for introgressing resistance genes by breeding have obtained limited success in counteracting the virus menace. Genetic modification (GM) based strategies have been successful in engineering artificial resistance in plants. Several different approaches based on pathogen derived resistance, antisense constructs, hairpin RNA, double stranded RNA etc. have been used to enhance plant resistance to the virus. Recently, genome editing (GE) strategies mainly involving the CRISPR/Cas mediated modifications are being used for virus control. In this review, we discuss the developments and advancements in the GM and GE based methods in tackling virus infection in plants.

This paper considers a two-way relay network, where two source nodes exchange messages through several relays in the presence of an eavesdropper, and the channel state information (CSI) of the eavesdropper is imperfectly known. The amplify-and-forward relay protocol is used and the relay beamforming weights are designed. The model is built up to minimize the total relay transmit power while guaranteeing the quality of service at users and preventing the eavesdropper from decoding the signals. Due to the imperfect CSI, a semi-infinite programming problem is obtained. An algorithm is proposed to solve the problem, and the iterative points are updated through the linesearch technique, where the feasibility are preserved during iterations. The optimality property is analyzed. The obtained subproblems are quadratic constrained quadratic programming problems, either with less than $4$ constraints or with only one variable, which are solved optimally. Simulation results demonstrate the importance of the proposed model, and imply that the proposed algorithm is efficient and converges very fast, where more than 85% of the problems are solved optimally.

In order to meet the Millennium Development Goals set forth by the United Nations’ Millennium Summit that took place in 2000, in New York, particularly in the area of education, the Mozambican Government decided that, from 2003 onwards, during their primary school formation, students should be passed automatically even if they do not have enough intellectual capacities that justify their progress. In fact, this decision was made during a period when there were many pupils being failed, due to various reasons. After more than 15 years of its implementation, this paper aims to analyzing the results acquired from this decision, from the point of view of the quality of education. This will be done taking into account the prevailing situation of education in Mozambique. Having considered these aspects, the paper will move on to presenting some of the challenges and opportunities that the country should consider in the area of education, as a way to bring about better outcomes and promote development, in the country.

This paper reviews the design and component of two types of RWHS, namely roof harvesting system (RHS) and pond harvesting system (PHS). The performance in terms of quantity and quality of collected rainwater and energy consumption for RWHS with different capacities were evaluated, as well as the benefits and challenges particularly in environmental, economic and social aspects. Presently, RHS is more commonly applied but its effectiveness is limited by its small scale. The PHS is of larger scale and has greater potentials and effectiveness as an alternative water supply system. Results also indicate the many advantages of PHS especially in terms of economics, environmental aspects and volume of water harvested. While RHS may be suited to individual or existing buildings, PHS has greater potentials and should be applied in newly developed urban areas with wet equatorial climate.

Abstract Objectives: Aging may challenge life and even affect individuals' well-being and flourishing. This includes challenges of shrinking social relations and being by yourself in old age while using your personal strengths. The current study examines two important personal resources, i.e., the skill of positive solitude and the 24 character-strengths, that may be associated with flourishing in old age. Methods: A convenience sample of 1085 community-dwelling adults (M = 57.20, SD = 6.24, range = 50-87), completed an online self-report survey with demographic measures and scales measuring personal strengths, the skill of positive solitude, and flourishing. Results: As hypothesized, the 24 character-strengths and positive solitude, were each associated with flourishing, and positive solitude moderated the relationships between the 24 character-strengths and flourishing. The 24 character-strengths and flourishing relationship was stronger among participants with lower levels of positive solitude. Conclusion: These findings highlight that despite the decrease in social relations which often characterizes old age, the skill of positive solitude serves as a valuable resource for flourishing in the later stages of life.

In financial time series modelling and forecasting, combining ARMA and GARCH models tend to produce superior and reliable models for volatility persistence, half-life volatility and backtesting (application of model in real life). In Nigeria, banking stocks are mostly traded because of its potential benefits to investors. This study modelled and forecasted the Guaranty Trust (GT) Bank daily stock returns from January 2^nd 2001 to May 8^th 2017 data set collected from a secondary source. The ARMA-GARCH models, persistence, half-life and backtesting were used to analysed the collected data using student t and skewed student t distributions, and the analyses are carried out R environment using rugard and performanceAnaytics Packages. The study revealed that using the lowest information criteria values only could be misleading rather we added the use of backtesing. The ARMA(1,1)-GARCH(1,1) models fitted exhibited high persistency in the daily stock returns while the days it takes for mean-reverting of the models ranges from 5 days to 100 days but unfortunately the models failed backtesting. The results further revealed ARMA(1,1)-eGARCH (2,2) model with student t distribution provides a suitable model for evaluating the GT bank stock returns among the competing models while it takes less than 30 days for the persistence volatility to return back to its average value of the stock returns. This study recommended that researchers should adopt backtesting approach while fitting GARCH models while GT bank stocks investor should be assured that no matter the fluctuations in the stock market, the GT bank stock returns has the ability to returns to its mean price return.

The drastically increasing amount of plastic waste is causing an environmental crisis that requires innovative technologies for recycling post-consumer plastics to achieve waste valorization while meeting environmental quality goals. Biocatalytic depolymerization mediated by enzymes has emerged as an efficient and sustainable alternative for plastic treatment and recycling. A variety of plastic- degrading enzymes have been discovered from microbial sources. Meanwhile, protein engineering has been exploited to modify and optimize plastic-degrading enzymes. This review highlights the recent trends and up-to-date advances in mining novel plastic-degrading enzymes through state-of-the-art omics-based techniques and improving the enzyme catalytic efficiency and stability via various protein engineering strategies. Future research prospects and challenges are also discussed

CO2 has characteristic properties and reactions at converter smelting temperature, and the chemical reaction between CO2 and elements such as C and Si in the molten pool has bubble proliferation and cooling effects, which can effectively improve the kinetic and thermodynamic conditions of converter smelting. Here, an experimental study and industrial test on the application of CO2 in converter smelting were carried out. The smelting effects of Mode-1 and Mode-2 with total CO₂ injection amounts of 229 Nm³ and 196 Nm³, respectively, were compared, and the changes in molten steel and slag compositions, dust removal, and gas are analyzed. The test results show that converter top and bottom blowing CO₂ technology (COMI-B)technology had significant metallurgical advantages over the N-Mode; the dephosphorization rate increased by 4.2%, slag (FeO) content was reduced by 2.04%, end point nitrogen content of molten steel was reduced by 20%, gas recovery increased by 8.29 Nm³/t, and soot production reduced by 14.7%. The results of the study provide reference for the application of COMI-B technology in converters in the iron and steel industry and develop a new path for resource utilization of CO₂.

Patients living with cancer often experience serious adverse events due to their condition or its treatments. Those events may lead to a critical care unit admission or even result in death. One of the most important but challenging part of care is to build a caring plan according to the patient’s wishes, meeting his goals and values. Advance directives (ADs) allow everyone to give their preferences in advance regarding life sustaining treatments, continuation, and withdrawal or withholding of treatments in case one is not able to speak his mind anymore. While the absence of ADs is associated with a greater probability of receiving unwanted intensive care around the end of his life, their existence correlates with the respect of the patient’s desires and his greater satisfaction. Although progress has been made to promote ADs’ completion, they are still scarcely used among cancer patients in many countries. Several limitations to their acceptation and use can be detected. Efforts should be made to provide tailored solutions for the identified hindrances. This narrative review aims to depict the situation of ADs in the oncology context, and to highlight the future areas of improvement.

This review presents a comprehensive and systematic study of the field of bacterial plant biostimulants and considers the fundamental and innovative principles underlying this technology. Plant biostimulants are an important tool for modern agriculture as part of an integrated crop management (ICM) system; helping make agriculture more sustainable and resilient. Plant biostimulants contain substance(s) and/or microorganisms whose function when applied to plants or the rhizosphere, is to stimulate natural processes to enhance plant nutrient uptake, nutrient use efficiency, tolerance to abiotic stress, biocontrol, and crop quality. The use of plant biostimulants has gained substantial and significant heed worldwide as an environment-friendly alternative for sustainable agricultural production. Presently, there is an increasing curiosity of industry and researchers in microbial biostimulants especially, bacterial plant biostimulants (BPBs) to improve crop growth and productivity. The BPBs that are based on PGPR (plant growth-promoting rhizobacteria) play plausible roles to promote/stimulate the crop plant growth through several mechanisms that include, i) nutrient acquisition by nitrogen (N₂) fixation and solubilization of insoluble minerals (P, K, Zn), organic acids and siderophores, ii) antimicrobial metabolites and various lytic enzymes, iii) action of growth regulators and stress-responsive/induced phytohormones, iv) ameliorating abiotic stress like drought, high soil salinity, extreme temperatures, oxidative stress, and heavy metals by using different modes of action, and v) plant defense induction modes. Presenting here is a brief review emphasizing the applicability of BPBs as an innovative exertion to fulfill the current food crisis.

Aptamers have a well-earned place in therapeutic, diagnostic, and sensor applications, and we now show that they provide an excellent foundation for education, as well. Within the context of the Freshman Research Initiative (FRI) at The University of Texas at Austin, students have used aptamer selection and development technologies in a teaching laboratory to build technical and 21st century skills appropriate for research scientists. One of the unique aspects of this course-based undergraduate research experience is that students develop their own projects, and take ownership of their own science in what would otherwise be a traditional teaching lab setting. Of the many successes, this work includes the isolation and characterization of novel calf intestinal alkaline phosphatase (anti-CIAP) RNA aptamers by an undergraduate researcher. Further, preliminary survey data suggest that students who participate in the aptamer research experience express significant gains in their self-efficacy to conduct research, and their perceived ability to communicate scientific results, as well as organize and interpret data. This work will describe the use of aptamers in an educational setting, highlight the positive student outcomes of the aptamer research experience, and more particularly present the research findings relative to the anti-CIAP aptamer.

This project involves the development of Fire Suppression System (FSS) leveraging of Home automation system using Graphical System design (LabVIEW) software and Arduino microcontroller for real-time monitoring and control. The system integrates an Infrared (IR) flame sensor, an MQ2 gas sensor to detect and suppress fire hazards efficiently. The LabVIEW interface facilitates real-time monitoring of sensor data, allowing users to visualize and analyze the environmental conditions. Through this system, fires are automatically subdued, enhancing safety without requiring human intervention. This advances fire safety by swiftly containing threats and minimizing potential damage.

This paper proposes the localisation of room occupants in home environments using Unobtrusive Sensing Solutions (USSs). The ability to localise room occupants in home environments can help in the objective monitoring of sedentary behaviour. While wearable sensors can provide tangible information on health and wellness, they have battery life issues and the inability to perform prolonged monitoring. This work uses heterogeneous USSs in the form of an Infrared Thermopile Array (ITA-64) thermal sensor and a Multi-Chirp Frequency Modulated Continuous Wave Mono-pulse (MC-FMCW-M) Radar sensor to monitor room occupants. Digital filters and background subtraction algorithms were used to process the thermal images gleaned from the ITA-64 thermal sensors. The MC-FMCW-M Radar sensor used multi-chirp and Doppler shift principles to estimate the exact location of the targeted room occupants. The estimated distances from the Radar Sensor were compared with ground truth values. Experimental results demonstrated the ability to identify thermal blobs of occupants present in the room at any particular time. Data analyses indicated no significant difference (p = 0.975) and a very strong positive correlation (r = 0.998) between the ground truth distance values and those obtained from the Radar Sensor.

Age-in-place can reduce the progress of dementia syndrome and improve the quality of life of the sufferers and their families. This work proposes an innovative information home support system to be established at the houses of people suffering from dementia. The main innovation of the system are its transparent character that overcomes the need for training of the sufferer, as well as the exploitation of a well-known technique for dementia, namely music therapy. It addresses the need of people suffering from dementia as well as their familiars to be recognized by them and have better interaction and collaboration. The system offers a ubiquitous recognition system, just by using smart devices like smart-phones or smart-wristbands. When a familiar person is detected in the house, then a sound file is reproduced on smart speakers placed in the house, in order to trigger the memory, based on the principles of music therapy. The system reproduced the appropriate time at 100% of the cases and the benefits of music therapy are evident daily. To the best of the authors' knowledge, this is the first system of its kind ever reported in the literature.

The study findings revealed significant variability in various wood properties among different genetic families, although the static modulus of elasticity did not exhibit significant differences between the chosen genetic families. All measured wood properties decreased from the bottom to the top of the model trees. Wood hardness displayed a moderately negative correlation with wood density and weak correlations with MOE and MOR. Given the weak correlations between wood hardness and other wood mechanical properties, it is suggested that the MOEdyn would be a more suitable trait for genetic studies.

Robot-assisted rehabilitation has emerged as a promising approach for enhancing motor function in stroke survivors. However, the feasibility and effectiveness of home-based robotic training in this population are underexplored, especially in low/middle-income countries. This feasibility study aimed to address this gap by examining the feasibility and effectiveness of independent home-based training using PLUTO, a robotic device for hand training. A total of 7 chronic stroke survivors were recruited, with 5 completing the study. The results revealed high engagement and adherence to the home-based training program, with participants averaging 1659.8 minutes of training over 24.8 days. The PLUTO system demonstrated excellent usability and elicited positive user perceptions. Significant improvements were observed in functional outcomes, as evidenced by a noteworthy increase in Fugl-Meyer Assessment scores (mean increase of 6.2 points, exceeding the minimal clinically important difference (MCID) of 5.35 points). Furthermore, participants showed improvements in the ABILHAND measure (mean improvement of 1.24 logits, surpassing the MCID of 0.2 logits) and the Barthel Index (mean increase of 8.8 points). These findings demonstrate the feasibility and effectiveness of home-based robotic rehabilitation for chronic stroke survivors. This has implications for expanding access to rehabilitation services in low- and middle-income countries, enhancing patient engagement and adherence, and improving functional outcomes. Larger controlled studies are warranted to evaluate the effectiveness of home-based robotic rehabilitation programs.

Background: The cumulative number of patients during the COVID-19 pandemic led to a significant shortage of hospital beds. Many patients may not require hospitalization and can be clinically observed in home settings. However, some psychosocial factors are correlated with unsuccessful home isolation (HI), which might negatively affect the transmission control in the community. Therefore, we developed a new psychosocial screening tool (CCPHIET) for assessing HI suitability and examined its validity and reliability.Methods: This cross-sectional descriptive study included COVID-19 patients who were deemed to be medically safe for 14 days of HI. The CCPHIET is comprised of 8 clinical domains pertinent to HI behavioral compliance and risk. We explored its statistical validity and reliability and discussed the potential utility of this tool. Results: A total of 65 COVID-19 patients participated in this study. Most patients (58.5%) were evaluated as good candidates for HI. The CCPHIET has an acceptable content validity (IOC index > 0.5), moderate internal consistency (Cronbach’s alpha = 0.611) and substantial to excellent inter-rater reliability (Intraclass correlation coefficient = 0.944, Cohen’s kappa= 0.627).Conclusions: To compromise between strict and costly absolute institutional quarantine and the potentially unsuccessful absolute HI, the CCPHIET may help to identify good candidates for HI in mild and asymptomatic COVID-19 patients. This psychosocial information would support the physicians in matching each patient to the most suitable setting. Therefore, safe medical care is provided, unnecessary use of medical resources is spared, and local transmission is contained.

In recent years, the management of health systems is a main concern of governments and decision makers. Home health care is one of the newest methods of providing services to patients in developed societies that can respond to the individual lifestyle of modern age and the increase of life expectancy. The home health care routing and scheduling problem is a generalized version of the vehicle routing problem, which is extended to a complex problem by adding special features and constraints of health care problems. In this problem, there are multiple stakeholders such as nurses for which an increase of their satisfaction level is very important. In this study, a mathematical model is developed to expand traditional home health care routing and scheduling models to downgrading cost aspects by adding the objective of minimizing the difference between the actual and potential skills of the nurses. Downgrading can lead to a dissatisfaction of the nurses. In addition, skillful nurses have higher salaries and high-level services increase equipment costs and need more expensive trainings and nursing certificates. Therefore, downgrading can enforce hidden huge costs to the managers of a company. To solve the bi-objective model, an -constraint based approach is suggested and the model applicability and its ability to solve the problem in various sizes are discussed. A sensitivity analysis on the Epsilon parameter is conducted to analyze the effect of this parameter on the problem. Finally, some managerial insights are presented to help the managers in this field, and some directions for future studies are mentioned as well.

Home Security Systems are very important features of modern residential and office setups. This system is used to keep home safe from harmful gases, fire and intruders. It must be affordable, reliable and effective. In this paper, a GSM based home security system has been designed and implemented. The system consists of a GSM Module, MQ-2 smoke detector, Ultrasonic sonar sensor, LM35 temperature sensor, Arduino Uno and relay module. The MQ-2 smoke detector is used to detect harmful gases i.e. LPG, CH4, CO, Alcohol, Smoke or Propane. Any of the harmful gases stated above is detected it will warn the owner by activating the buzzer and displaying a warning message on the LCD display. It will also send a SMS to the owner. Our system can also measure temperate and if the temperature is increased above a certain range it will compensate it by activating Air Conditioner through the relay module. The system will also send a SMS to the owner. It can also detect intruders using Ultrasonic sensor and warn us through buzzer, SMS and displaying message on the LCD. Our system is reliable as it has very fast response and cost effective and it has been developed using our own technologies.

In the rapidly evolving landscape of genetic engineering, the advent of CRISPR-Cas technologies has catalyzed a paradigm shift, empowering scientists to manipulate the genetic code with unprece-dented accuracy and efficiency. Despite the remarkable capabilities inherent to CRISPR-Cas sys-tems, recent advancements have witnessed the integration of small molecule to augment their functionality, introducing new dimensions to the precision and versatility of gene editing applica-tions. This review delves into the synergy between CRISPR-Cas technologies and small molecule drugs, elucidating the pivotal role of chemicals in optimizing target specificity and editing efficiency. By examining a diverse array of applications, ranging from therapeutic interventions to agricultural advancements, we explore how the judicious use of chemicals enhances the precision of CRISPR-Cas-mediated genetic modifications. In this review we emphasize the significance of small molecule drugs in fine-tuning the CRISPR-Cas machinery, which allows researchers to exert meticulous con-trol over the editing process. We delve into the mechanisms through which these chemicals bolster target specificity, mitigate off-target effects, and contribute to the overall refinement of gene edit-ing outcomes. Additionally, we discuss the potential of chemical integration in expanding the scope of CRISPR-Cas technologies, enabling tailored solutions for diverse genetic manipulation challenges. As CRISPR-Cas technologies continue to evolve, the integration of small molecule drugs emerges as a crucial avenue for advancing the precision and applicability of gene editing techniques. This re-view not only synthesizes current knowledge but also highlights future prospects, paving the way for a deeper understanding of the synergistic interplay between CRISPR-Cas systems and chemical modulators in the pursuit of more controlled and efficient genetic modifications.

Prior to clinical trials, preclinical testing of oncology drug candidates is performed by evaluating drug candidates with in vitro and in vivo platforms. For in vivo testing, animal models are used to evaluate the toxicity and efficacy of drug candidates. However, animal models often display poor translational results as many drugs that pass preclinical testing fail when tested in humans, with oncology drugs exhibiting especially poor acceptance rates. The FDA Modernization Act 2.0 promotes alternative preclinical testing techniques, presenting the opportunity to use higher complexity in vitro models as an alternative to in vivo testing, including 3D cell culture models. 3D tissue cultures address many of the shortcomings of 2D cultures by more closely replicating the tumour microenvironment through a combination of realistic drug diffusion, paracrine signaling, cellular phenotype, and vascularization that can better mimic native human tissue. This review will discuss the common forms of 3D cell culture, including cell spheroids, organoids, organs-on-a-chip, and 3D bioprinted tissues. Their advantages and limitations will be presented, aiming to discuss the use of these 3D models to accurately represent human tissue and as an alternative to animal testing. The use of 3D culture platforms for preclinical drug development is expected to accelerate as these platforms continue to improve in complexity, reliability, and translational predictivity.

With the emergence of COVID-19 pandemic in 2019, the world saw a humungous loss of human life and economic resources globally but also the rapid appearance of SARS-CoV-2 variants which have exhibited a higher transmissibility and/or virulence and which also evade immune system to such an extent that it raises a big question mark on the efficacy of current diagnostics, vaccines and convalescent plasma and mAb therapies. This has been attributed to the emergence of huge spectrum of mutations, especially in the virus’s spike (S) protein, occurring in regions harboring high concentration of B cell epitopes thus allowing neutralizing antibody escape. The mutations resulting in ACE 2 receptor recognition failure (T19R), unfavorable electrostatic interactions (E484K), structural change (∆69-70), disruption of hydrogen bonds, salt bridges or hydrophobic interactions (K417N, N501Y, ∆Y145) and change in orientation (N501Y) cause strong immune evasion by these variants. Further, the recent emergence of Omicron with more than 30 mutations in the S protein VOC allows it to escape and fail diagnosis as well as immune system and the protection generated by different vaccination regimes. Yet Omicron may not be the end of the story. This review presents an insight of the immunity escape and its mechanisms followed by different SARS-CoV-2 variant of concerns.

1) We shall discuss what modern interpretations say about the Heisenberg's uncertainties. These interpretations explain that a quantity begins to 'lose' meaning when a conjugate property begins to 'acquire' definite meaning. We know that a quantity losing meaning means that it has no fixed value and has an uncertainty . In this paper we look deeper into this interpretation and the outcome reveals more evidence of the quantity losing meaning. Newer insights appear. 2) We consider two extreme cases of hypothetical processes nature undergoes, without interference by a measurement: One, a system collapses to an energy eigenstate under the influence of a Hamiltonian instantaneously at a time $t$. This is thus what would happen if we would measure the system's energy. Next, when a particle becomes localised to a point at a time $t_0$ under the influence of a Hamiltonian. This is thus what would happen if we would measure the system's position. We shall prove that both these situations cannot arise under ordinary circumstances and thus measurement processes cannot be modelled by physical Hamiltonians.

With the advent of digitization, the integration of advanced technologies in operations and projects across all sectors is in progress. Accordingly, efforts are being made to utilize cutting-edge technologies to improve the circularity of the built environment. This study aimed to review the existing applications and limitations of building information modeling (BIM) tools for circular economy (CE) implementation from this perspective. A literature review was conducted to provide an overview of the use of BIM tools for conducting life cycle assessments, energy analysis, waste management, and formulation of material passports for buildings. It was found that BIM tools, which are available across all life cycle phases of building, have a great potential to improve the circularity of the sector. The overview provided on the use of various BIM tools may help stakeholders of the built environment understand the role of BIM for CE adoption in the sector.

Eicheon properties are discussed. It is shown that the eicheon surface allows setting a boundary condition for the vacuum polarization and obtaining a solution describing the dark matter tail in the Milky Way. That is, the dark matter in the Milky Way is explained as the F-type of vacuum polarization, which could be treated as dark radiation. The model presented is spherically symmetric, but a surface density of a baryonic galaxy disk is taken into account approximately by smearing the disk over a sphere. This allows the reproduction of the large distance shape of the Milky Way rotational curve. Andromeda's rotational curves are also discussed.

The reaction of mercaptoacetic acid esters with pentachloro-2-nitro-1,3-butadiene provides appropriate precursors for the synthesis of 2,3,4-trisubstituted benzo[h]quinolines. These heterocycles are easily accessible via a single-step reaction with 1-naphthyl- or 1-anthracenylamine, respectively. Due to steric bulk and high electron density ring closure to benzo[h]quinolines takes place, exclusively. Such highly substituted annelated pyridine systems can be modified in subsequent, selective reactions to build up new N-heterocycles with promising microbiological properties. Antibacterial and antiproliferative assays against four cell mammalian cell lines demonstrate that some of the sulfur-substituted benzo[h]quinolines analogs display potent phenotypic bioactivities in the single-digit micromolar range.

In this paper, industrial structure distortion, two-way FDI and carbon emission intensity are brought into a unified research framework, and based on China's panel data from 2011 to 2020, empirical tests are conducted employing Exploratory Spatial Data Analysis (ESDA), spatial econometric model and intermediary effect test. The results show the following. Firstly, China's industrial structure distortion index shows a downward trend. The industrial structure distortion index is the highest in the west, followed by the middle, and the lowest in the East. Secondly, the relationship between carbon emission intensity and economic development shows a "decoupling" effect and keeps decreasing year by year. The spatial disparity is remarkable, showing the pattern of "the east leading, the middle catching up and the west lagging ". At the provincial level, except in Xinjiang province, the carbon emission intensity of other provinces showed different degrees of decline. In terms of spatial distribution, the polarization characteristics of carbon emission intensity are significant, and the traditional spatial distribution pattern has been broken. Thirdly, there is a positive spatial correlation between China's industrial structure distortion, two-way FDI and carbon emission intensity. The distortion of industrial structure will not only lead to the increase of local carbon emission intensity but also produce reverse spillover to adjacent areas. IFDI and OFDI provide a strong driving force for the decline of carbon emission intensity. IFDI promotes the decline of carbon emission intensity in adjacent areas, while OFDI will increase the carbon emission intensity in surrounding areas. The interaction of IFDI and OFDI can significantly reduce the carbon emission intensity of local and adjacent areas. Fourthly, the results of intermediary effect analysis show that two-way FDI is the two channels of industrial structure distortion affecting carbon emission intensity. Industrial structure distortion can affect the transmission mechanism of carbon emission intensity by affecting two-way FDI.

The increase in population and the challenges caused by it are always among the concerns of decision-makers and policymakers in large countries. One of the most serious concerns is in the field of energy consumption. Optimizing energy use is one of the most effective ways to manage limited resources and energy. Energy consumption in residential houses constitutes a significant percentage of the total energy consumption worldwide; therefore, current research focusing on mathematical models aims to provide a predictive multi-objective linear mathematical model for residential house consumption. For this purpose, the consumption of water, electricity, and gas for 80 residential houses, including 10 household appliances and equipment on a weekly basis, has been considered. The results showed that the mixed-integer multi-objective predictor model is able to optimize household consumption plans compared to the actual state of household energy consumption. Since the goals of household satisfaction and energy consumption costs in the model conflict with each other, the influence coefficient was calculated to demonstrate the simultaneous achievement of these goals. The optimal value achievable with the default model for the model's purposes is 69%.

Sociality in animal populations is a continuum, and interactions between conspecifics are meaningful for all vertebrates. Ignorance of social structures can lead to misunderstanding their ecology and, consequently, to unsuccessful species management. Here, we combined genetic and spatial data on radio-collated brown bears (Ursus arctos) to investigate kin-related home range overlap and kin-related centroid distance within central and eastern Finland. We found that the extent of overlap of home ranges was positively linked with relatedness among adult females. A similar positive correlation could be detected between home range centroid distance and relatedness among adult females. Moreover, there were significant differences between the two studied regions: female brown bears in central Finland were more closely related to each other, and the sizes of their home ranges were larger than those in eastern Finland. The smaller home ranges and lower degree of relatedness among bears in eastern Finland might be a result of the substantially higher hunting pressure in the area, combined with immigration of new unrelated individuals from Russia.

The purpose of the present study was to investigate the effect of post-activation performance enhancement (PAPE) induced by eccentric half-squat exercise on vertical jump performance in male jumpers. The jumping height, peak power, and work were measured and evaluated in twenty male jumpers. Participants performed five eccentric half-squats at 85% of their one-repetition maximum (1 RM), with a knee angle below 90°, followed by immediate and 2min delayed jump assessments using Squat Jump (SJ) and Countermovement Jump (CMJ) tests. Results showed that this specific PAPE protocol did not significantly improve jump performance for both SJ and CMJ tests. Factors such as stimulus specificity, rest intervals, muscle length, and the balance between potentiation and fatigue may explain these results. The study highlights the complexity of PAPE responses and suggests that a single set of eccentric squats with a short rest may not improve jump performance in male jumpers. Further research is required to optimize the interplay between conditioning stimulus and rest periods to maximize PAPE effects in athletic performance enhancement.

The high-power Asymmetric half-bridge Converter (AHBC) LED constant current driver controlled by digital current mode is a fourth-order system. Static operating point, parasitic resistance, load characteristics, sampling effect, modulation mode and loop delay will have great influence on its dynamic performance. In this paper, the small-signal pulse transfer function of the driver is established by the discrete-time modeling method for the two operating points corresponding to the three modulation modes of the trailing edge, leading edge and double edge. And, the effects of parasitic parameters, delay effect, sampling effect and load effect are fully considered in modeling. For a large number of complex exponential matrix operations, the first order Taylor formula is used for approximate calculation after the coefficient matrix is obtained by substituting the data. Then, Matlab software is used to compare and analyze the discrete-time model and the discrete-average model. The results show that the proposed discrete-time model can more accurately characterize the resonant peak and high-frequency dynamic characteristics, and is very suitable for the design of high frequency digital controller.

Background: After the increasingly common anterior cruciate ligament reconstruction (ACLR) procedure in competitive athletes, rehabilitation is crucial for facilitating a timely return to sports (RTS) and preventing re-injury. This pilot study investigates the biomechanical and psychological outcomes of postoperative rehabilitation in competitive athletes, comparing supervised rehabilita-tion (SVR) and home-based rehabilitation (HBR). Methods: After ACLR, 60 (out of 74 screened) athletes were recruited and equally divided into 2 groups using non-probability convenience sam-pling: 30 HBR and 30 SVR (each group comprising 15 males and 15 females). Rehabilitation out-comes in respective groups were evaluated at 8 months using measures (Tegner-Activity-Scale [TAS], International Knee Documentation Committee subjective knee form [IKDC-SKF], ACL Return to Sport after Injury [ACL-RSI]) and objective parameters (isometric muscle strength, hamstring/quadriceps asymmetry). RTS was evaluated at 9 months; with ACL re-injury rates rec-orded approximately 6 months post-RTS. Results: Both groups exhibited decreased TAS scores (HBR: 8 to 6, SVR: 8 to 7), with the SVR group demonstrating superior post-operative IKDC-SKF scores (81.82 vs. 68.43) and lower ACL-RSI scores (49.46 vs. 55.25). Isometric and isokinetic mus-cle strength, along with asymmetry values, favored the SVR group 8 months post-ACLR (p