Supply chain transparency and traceability have become increasingly important in today's globalized and interconnected business environment. This qualitative research explores the challenges and perspectives of industry practitioners regarding supply chain transparency and traceability. Drawing on semi-structured interviews with a diverse group of supply chain professionals, the study identifies key themes including difficulties in achieving visibility beyond immediate suppliers, data fragmentation and inconsistency, barriers to technology adoption, regulatory compliance, cultural and organizational factors, impacts on supplier relationships, and the influence of the COVID-19 pandemic and sustainability goals. The findings highlight the complex nature of these challenges and the need for collaborative, multi-stakeholder approaches to address them effectively. Despite the challenges, the study also reveals the potential benefits of transparency and traceability for enhancing supply chain resilience, sustainability, and stakeholder trust. Moving forward, companies must leverage technological innovations, establish clear communication channels with suppliers, navigate regulatory complexities, and foster a culture of transparency and accountability within their organizations. Future research should focus on practical strategies for implementing transparency and traceability initiatives, as well as evaluating their impact on supply chain performance and sustainability outcomes.

Network Function Virtualization (NFV) allows for the dynamic provisioning of Virtualized Network Functions, adapting services to the complex and real-time network environment for enhanced network performance. Despite the benefits of NFV, virtual network functions (VNFs) migration and the energy consumption pose significant challenges due to the dynamic nature of the physical network, especially in the edge-cloud continuum network. Currently, people tackle this challenge by predicting the network traffic and then proactively migrating the VNFs using the predicted values. There are two challenges here. First, when SFCs belong to different network service providers, the historical network traffic data is held by the service providers, and they are reluctant to share the historical data due to privacy concerns. Without the historical network traffic data of each SFC, the resource provider that owns the underlying network cannot effectively predict the network traffic; in addition, without the feedback of the migration results of the underlying physical network, the network traffic prediction will be difficult to match the needs of the physical network. In this manuscript, we solve the problem of network traffic prediction in the NFV-based edge-cloud continuum network for multiple network service providers. We aim to improve migration performance and reduce energy consumption while ensuring resource and latency requirements. To protect the privacy of each network service provider, we apply an FL algorithm. After that, to improve the migration performance, we tailor the loss function. In the loss function, factors such as the number of migrations, the number of migration failures, and the energy consumption of the NFV-based edge-cloud continuum network are added. Additionally, to obtain the results of the SFC migration, we develop a mathematical model for the problem of multiple network service providers in the NFV-based network. The effectiveness of our algorithm is evaluated through extensive simulations, and the results show a significant reduction in the number of migrated nodes and energy consumption while improving the SFC acceptance ratio compared to state-of-the-art schemes which only use the difference between predicted and actual flows to define the loss function.

Mineral nutrition is essential for plant growth and interaction of plants with biotic and abiotic stresses. Mango twig-tip dieback (MTTD) is a new type of mango decline, but its impact on the trees’ mineral nutrition is unknown. This study was conducted to determine the effect of MTTD infection on the nutrient status, balance, and resorption efficiency (RE) of mango. Leaf nutrient concentrations and deviation from the optimum percentage (DOP) indices of ‘Kensington Pride’ (KP) mango trees with low (LD) and high (HD) levels of MTTD infections were analyzed to compare the foliar nutrition status and nutrient balance between the LD and HD trees. Moreover, the nutrient resorption efficiency of MTTD-infected dried leaves (RE_D) was compared with the resorption efficiency of healthy (RE_S) leaves of KP mangoes. The concentrations of the total Ca, Mg, Cu, Fe, Mn, and Zn were lower in the HD trees than in the LD trees. But the total K content was higher in the HD trees, and its DOP index was sufficient, while the total K concentration was low and deficient level in LD trees. Moreover, DOP indices for total Ca, Mn, and Zn were less deficient in LD trees than in HD trees, and overall nutrient imbalances were exacerbated in HD trees. RE_D was significantly lower than RE_S for the total N, P, S, Cu, Fe, and Zn but significantly higher than RE_S for K. The study underscores the significant influence of MTTD on the mineral nutrition of KP mangoes, revealing distinct nutrient variations between trees with low and high MTTD infection levels. These findings have important implications for mango crop management, emphasizing the need for targeted nutrient interventions to address imbalances induced by MTTD and enhance the overall health and resistance of mango trees against MTTD infection.

The extensive use of polypropylene (PP) in various industries has heightened interest in devel-oping efficient methods for recycling and optimising its mixtures. This study focuses on formu-lating predictive models for the Melt Flow Rate (MFR) and shear viscosity of PP blends. The in-vestigation involved characterising various grades, including virgin homopolymers, copolymers, and post-consumer recyclates, in accordance with ISO 1133 standards. The research examined both binary and ternary blends, utilising traditional mixing rules and symbolic regression to predict rheological properties. High accuracy was achieved with the Arrhenius and Cragoe models, at-taining R² values over 0.99. Symbolic regression further enhanced these models, offering signif-icant improvements. To mitigate overfitting, empirical noise and variable swapping were in-troduced, increasing the models' robustness and generalisability. The results demonstrated that the developed models could reliably predict MFR and shear viscosity, providing a valuable tool for improving the quality and consistency of PP mixtures. These advancements support the de-velopment of recycling technologies and sustainable practices in the polymer industry by opti-mising processing and enhancing the use of recycled materials.

The ASEAN Community-based Tourism (CBT) Standard has been adopted by 10 ASEAN member states in 2016 in order to collectively promote ASEAN as a competitive community-based tourism destination. Among the ASEAN member states, Lao PDR (Laos), has a unique CBT development experience through collaboration with various international development agencies. Such history has brought about issues when ASEAN CBT Standard was implemented at to provincial and district levels in Laos, including concerns of related communities on the Standard being not easily applicable considering the state of tourism development. While the application of the regional standard is a significant issue to the tourism industries in the Member States, however, there has been a lack of studies regarding the dynamics of implementation of regional tourism standards at the national level. In order to fill the research gap, this study utilized in-depth interviews with seven executives with significant experiences from the government, international development agency, international organization, and the private sector. Interviewees projected a diversity of perspectives on enabling factors and challenges in implementing ASEAN Community-based Tourism Standard at the national level focusing on Laos, which showed the complexity of CBT dynamics. The results also revealed how regional standards can be further recognized and promoted to the key stakeholders of Laos, better accepted and utilized by end users, and possibly better customized according to the local circumstances. Findings of this study evidence that collaboration among key stakeholders and the expected role of these stakeholders are critical when implementing ASEAN CBT Standard.

Asphaltene-resin-paraffin deposition (ARPD) is a complicated and prevalent issue in oil and gas industry, impacting the efficiency, integrity of petroleum extraction, production, transportation and processing systems. Considering all witnessed ARPD problems in Azerbaijan oil fields, this paper proposed a chemical method and optimized the type and the concentration of chemical inhibitors. And then the effect of selected chemical reagent on inhibiting the ARPD amount and thus en-hancing oil recovery was detected by reservoir simulation during both waterflooding and CO2 flooding production. Three new chemical compounds (namely, Chemical-A, Chemical-B and Chemical-C) were examined in laboratory conditions and their impact on rheological properties of high-paraffin oilfield samples of Azerbaijan (X, Y and Z) were investigated. Experimental results show that Chemical-C with concentration of 600 g/t has the best efficiency for alleviating the problems. After adding Chemical-C to the crude oil, the freezing point of oil is decreased from 12 °C to (-4) °C, ARPD amount is declined from 0.185 to 0.016 g and oil effective viscosity is reduced from 16.2 mPa·s to 3.1 mPa·s. It is determined that for water and CO2 flooding, higher injection pressure resulted in reduced asphaltene precipitation. Adding selected ARPD inhibitor, the oil recovery for waterflooding can increase from 52% to 62%, while it can rise from 55% to 68% for CO2 flooding.

Accurate forecasting of available energy portion that corresponds to the reservoir inflow of the month(s) ahead provides important decision support for the hydropower plants in energy pro-duction planning for revenue maximization, as well as for the environmental impact prevention, and flood control at the upstream and downstream of a basin. Therefore, a reliable forecasting tool or model is deemed necessary and crucial. Considering the fluctuation and nonlinearity of data which significantly influence the forecasting results, this study develops an effective hybrid model by integrating Artificial Neural Network (ANN) and Particle Swarm Optimization (PSO) called “PSO-ANN” model based on the hydrological and meteorological data pre-processed by cross-correlation function (CCF), autocorrelation function (AFC), and normalization techniques for predicting the available energy portion corresponding to the reservoir inflow mentioned above for a case study hydropower plant in Laos namely, Theun-Hinboun hydropower plant (THHP). The model was evaluated by using correlation coefficient (r), relative error (RE), root mean square error (RMSE), and Taylor diagram plots in comparison with the popular single algorithm approaches such as ANN, and NARX models. Results demonstrated the superiority of the proposed PSO-ANN approach over the other two models.

The research presented in this article is based on a strategic approach to a rural area in the mountainous region of Romania and is underwritten by specialists in the economy of mountainous regions in order to elaborate relevant solutions to complex problems relating to sustainable development. In essence, the research underlines and promotes the particularities of performing research for the identification and valuation of endogenous resources, that is, creating relevant strategic options for the durable development of the mountainous region, centered on the renewal of economic activities related to the existent endogenous resources, by using methods, work techniques, and instruments of strategic analysis. These factors are subordinate to the process of harmonization to the requirements of community development and environmental protection according to the new strategy for the development of the European Union 2020 (European Green Pact). This pact also emphasizes the necessity of involving the different factor categories of local accountability, promotion, activation, and the development of specific economic activities of different local contexts of sustainability. The research methodology used involves a case study whose complexity necessitated the use of quality and quantity research methods in order to underline specific elements of the rural area in the Romanian mountainous region. Specifically, we used a strategic diagnosis of the Romanian mountainous region using the PESTEL and SWOT models. In order to have relevant strategic options available, the continuity of research was achieved through the use of SOR analysis, creating a problem tree and an objectives tree.

The effects of reaction temperature, reaction time, heating rate, nitrogen flow rate and catalyst quality on the oil yield and oxygen content in the oil were investigated by using the single factor principle. Too high and too low reaction temperature, nitrogen flow rate, heating rate and reaction time have improved the yield of bio-oil, but the oxygen content in bio-oil is higher. The reduction of catalytic dose is beneficial to the increase of oil yield but not conducive to the increase of aromatic compound content. The optimal reaction conditions were observed as reaction temperature of 500℃, nitrogen flow rate of 110 mL/min, heating rate of 20℃/min, reaction time of 15min, mass ratio of catalyst to coconut coat powder was 1, and the oil yield was 4.97%, aquatic yield was 35.80%, and solid yield was 30.78%. The gas yield was 28.45%, the oxygen content was 10.3%, and the aromatic compound content was 89.7%.The analysis of catalytic cracking mechanism shows that most of the oxygen-containing compounds in the bio-oil are generated into water and aromatic compounds by catalytic cracking reaction at high temperature, thus removing oxygen.

With the widespread use of new equipment such as distributed photovoltaics, distributed energy storage, electric vehicles, and distributed wind power, the control of low-voltage distribution networks (LVDNs) has become increasingly complex. Acquiring the most recent topological structure is essential for conducting accurate analysis and real-time control of LVDNs. The signal-injection-based topology identification algorithm is favored for its speed and efficiency. This study proposes a new signal-injection-based topology identification algorithm aimed at solving the issues of reduced completeness and correctness of identification caused by missing feature signal records (FSRs). By analyzing the correlations between FSRs of different positions, the algorithm employs vertical and horizontal completion methods to effectively address missing data, combined with inclusion detection algorithms, to identify the topology of LVDNs. Based on the study of actual LVDN data, the results indicate that the algorithm not only significantly improves the completeness and correctness of topology identification for LVDNs but can also increase the number of devices in operation by evaluating the status of topological equipment, further enhancing the topology identification performance.

As the demand for long-distance flights continues to increase, supersonic transport (SST) has once again become a hot research topic. However, due to its uniqueness, there was few corresponding evaluation methods to compare the supersonic civil aircraft with common subsonic aircraft. This paper proposed an evaluation method for the competitiveness of supersonic civil aircraft based on the Analytic Hierarchy Process (AHP). Key indicators were selected to form a competitiveness evaluation model from the perspective of four criterion factors of economy, comfort, adaptability, and environment. The evaluation method proposed in this paper could reflect characteristics of supersonic civil aircraft and other subsonic aircraft, and effectively compare their competitiveness. This work can be used to evaluate the social acceptance of supersonic civil aircraft and provide reliable decision-making support for airlines' design work.

Background: The study was conducted to investigate if the mRNA vaccine technology could be adapted for the ectothermic vertebrate Atlantic salmon (Salmo salar). The lipid nanoparticle (LNP) technology has been developed and optimized for mRNA vaccines in mammals, stabilizing mRNA and facilitating delivery into cells. However, its utility at the temperature and specific biological environment in ectotherms remains unclear. In addition, it is unknown if modified mRNA containing non-canonical nucleotides can correctly translate in salmonid cells. Methods: We used an mRNA transcript coding for enhanced green fluorescence protein, flanked by the untranslated regions of the hemagglutinin-esterase gene of infectious salmon anemia virus, and a 120-base-long poly(A) tail. The mRNA was generated by in vitro transcription where uridine residues were replaced with N1-methyl-pseudouridines, and then encapsulated in LNPs. Results: When transfected into the salmonid cell line CHH-1, the mRNA-LNP construct induced expression of EGFP. Furthermore, when mRNA-LNPs were injected intramuscularly into salmon, in vivo protein expression was demonstrated by immunohistochemistry. EGFP was observed in cells infiltrating the space between the muscle cells in a focal inflammatory response. Conclusion: The results indicate that the N1-methyl-pseudouridine modified mRNA encapsulated in LNPs can be used to express antigens of interest in salmonid fish.

Keywords: Linear differential arrays; beam steering; frequency-invariant beamforming.

Volatile organic compounds (VOCs) released from plants have been correlated with disease-status. Analysis of VOCs using GC-MS is time-consuming, laboratory-based, and requires specialist training. Electronic nose devices (E-nose) provide a portable alternative. Three different E-nose devices were compared to assess how accurately they could detect Mango Twig Tip Dieback and Panama disease in banana. The devices were initially trained on known volatiles, then pure cultures of Pantoea sp., Staphylococcus sp., and Fusarium odoratissimum, and finally, on infected and healthy mango leaves and field-collected, infected banana pseudo-stems. The experiments were repeated three times with six replicates for each host-pathogen pair. The variation between healthy and infected host materials was evaluated by principal component and linear discriminant analysis, cross-validation and chemometric data analysis. GC-MS analysis was conducted contemporaneously and identified an 80% similarity between healthy and infected plant material. The portable C 320 was 100% successful in discriminating known volatiles but had a low capability in differentiating healthy and infected plant substrates. The advanced devices (PEN 3 / MSEM 160) successfully detected healthy and diseased samples with a high variance. The results suggest that E-nose devices are more sensitive and accurate in detecting changes of VOCs between healthy and infected plants compared to headspace GC-MS.

The multi-stage, multi-level assembly job shop scheduling problem (MsMlAJSP) is commonly encountered in the manufacturing of complex customized products. Ensuring production efficiency while effectively improving energy utilization is a key focus in the industry. For the energy-efficient MsMlAJSP (EEMsMlAJSP), an improved imperialist competitive algorithm based on Q-learning (IICA-QL) is proposed to minimize the maximum completion time and total energy consumption. In IICA-QL, a decoding strategy with energy-efficient triggers based on problem characteristics is designed to ensure solution quality while effectively enhancing search efficiency. Additionally, an assimilation operation with operator parameter self-adaptation based on Q-learning is devised to overcome the challenge of balancing exploration and exploitation with fixed parameters, thus the convergence and diversity of the algorithmic search is enhanced. Finally, the effectiveness of the energy-efficient strategy decoding trigger mechanism and the operator parameter self-adaptation operation based on Q-learning is demonstrated through experimental results, and the effectiveness of IICA-QL for solving EEMsMlAJSP is verified by comparing with other algorithms.

The normal growth and development of skeletal muscle is essential for the health of the body. The regulation of skeletal muscle by intestinal microorganisms and their metabolites has been continuously revealed. Acetate is the predominant short-chain fatty acid synthesized by gut microbiota through the fermentation of dietary fiber, however, the underlying molecular mechanisms governing the interaction between acetate and skeletal muscle during rapid growth stage remain to be further elucidated; Here, specific pathogen-free (SPF) mice, germ-free (GF) mice, and germ-free mice supplemented with sodium acetate (GS) were used to evaluate the effects of acetate on skeletal muscle growth and development of young mice with gut microbiota deficiency; We found the concentration of serum acetate, body mass gain, succinate dehydrogenase activity and expression of myogenesis maker gene of skeletal muscle in the GS group was higher than GF group following sodium acetate supplement. Furthermore, the transcriptome analysis revealed that acetate activated biological processes regulating skeletal muscle growth and development in GF group that are inhibited due to gut microbiota deficiency. In vitro experiment, we proved that acetate up-regulated Gm16062 to promote skeletal muscle cell differentiation; Overall, our findings proved that acetate promote skeletal muscle growth and development in young mice via increase Gm16062 expression.

In this study, we analyzed the microbial community of traditional fermented foods in Jeju Island to identify the distribution of useful microorganisms and confirm their anti-inflammatory and anti-melanogenic effects to determine their potential use as cosmetic ingredients. Firstly, we examined the microbial communities of Omphalius rusticus Jeotgal (OR), Spratelloides gracilis Jeotgal (SG), Chromis notata Jeotgal (CN), Turbo cornutus Jeotgal (TC), Trichiurus lepturus intestine Jeotgal (TL), Branchiostegus japonicus Sweet Rice Punch (BJ), Salted Anchovy Sauce (SA), Jeju Soy Sauce (JSS), and Jeju Soybean Paste (JSP). We found that Latilactobacillus sakei (87.2%), Tetragenococcus halophilus (37.7%), T. halophilus (96.8%), Bacillus subtilis (23.4%), T. halophilus (71.3%), L. sakei (53.7%), Lentibacillus sp. (42.9%), Enterococcus durans (14.6%), and E. durans (32.8%) were the dominant species. Secondly, to study the nine Jeju fermented foods’ anti-inflammatory and anti-melanogenic effects, we employed RAW 264.7 and B16F10 cells, classic cell models for inflammation and melanogenesis studies. Ethyl acetate extracts of the nine Jeju fermented foods all inhibited nitric oxide (NO) and melanin production in a concentration-dependent manner. Thirdly, to test the applicability of the nine Jeju fermented foods to human skin, we used the MTT assay to assess their cytotoxic effects on human keratinocytes (HaCaT cells). Finally, the topical applicability of the nine Jeju fermented foods was tested through primary skin irritation, and it was found that they did not cause any adverse effects. Therefore, extracts from the nine Jeju fermented foods have potential applications as ingredients in anti-inflammatory and anti-melanogenic products and can be used in the cosmetic industry.

The Shimensi super-large tungsten polymetallic deposit is located in Late Jurassic- Early Cretaceous Porphyry-Skarn tungsten ore belt in the south Yangtze metallogenic belt. There are 3 types of mineralization: veinlet-disseminated type, thick quartze vein type and hydrothermal crypto-explosive breccia type. Based on geological studies, this paper presents new petrographic, microthermometric, laser Raman spectroscopic and hydrogen and oxygen isotope research of the fluid inclusions from the deposit. The results show that there are five different types of fluid inclusions: liquid-rich inclusions, vapor-rich inclusions, pure liquid inclusions, pure vapor inclusions, and fluid inclusions containing a solid crystal. The homogenization temperatures of the fluid inclusion range from 140℃-270℃, the salinities are 3%-5% NaCleq and the densities of ore-forming fluid range from 0.64 g/cm3 to 0.99 g/cm3. For the analyses of Laser Raman spectroscopic, the ore-forming fluids can be approximated by a Ca2+-Na+-SO42--Cl- fluid system with small amount of CO2, CH4 and N2. Otherwise, the datas of the pressure, pH and Eh show a fluid metallogenic environment of low pressure, weak acid and weak reduction. The values of the homogenization temperature in 3 types of orebodies suggest that the mineralization is characterized by the decrease of the temperature under the condition of the fluid immiscibility. The H-O isotope values are interpreted to indicate that the ore-forming fluids are mainly composed of magmatic water, and also the meteoric water was added with the process of the magma rising.

This observational study was ordered by the Medical Practitioners’ Chamber in Warsaw. The objective of the study was to evaluate the health status of physicians in relation to their occupational duties. Professional burnout was considered relative to different features of personality. This study was initially carried out from 2005–2008, but further analysis of burnout and personality was carried out from 2017–2018. The research tools were anonymous, validated questionnaires. The sample size was based on the size of the population— the registry of the Regional Chamber of Medical Practitioners— and literature on burnout prevalence. The respondents’ work places were randomly selected from the Mazovian District register. The test on burnout was completed by 378 respondents, while 62 subjects completed a personality test. Results showed that burnout syndrome was an occupational problem for healthcare workers. Professional burnout affected as many as 42% of respondents(n = 158). It affected two age groups in particular: physicians up to 31 years old and individuals aged 41-50. Moreover, neuroticism was found to be significantly related to burnout syndrome. In conclusion, burnout syndrome is common among medical practitioners, and neuroticism may be correlated with burnout syndrome.

Preschoolers with disabilities and their caregivers have been neglected in health and social service provision in most low-income countries and arguably too in low resourced areas of more affluent nations. Yet as this rapid review of published literature identifies, there are low-cost, evidence-based strategies to address their needs that can be implemented in communities by local people. Five key features of the necessary supports are examined. First the leadership functions required to create and implement the support services. Second, the family-centred, home-based support provided to caregivers and the personnel undertaking this form of support. Third, providing opportunities for peer support to flourish and encouraging the formation of advocacy groups across families. Fourth, mobilizing the support of significant groups within the community; notably traditional healers and leaders; health services and poverty alleviation initiatives. Fifth, devising ways in which preschool educational opportunities can be offered to children as a prelude to their inclusion in primary schools. The review serves a further purpose. It provides an example of how public health researchers and academics could achieve more rapid implementation of evidence-based knowledge into existing and new support services through dissemination to community practitioners.

In this work, the properties of a composition based on synthetic rubber ethylene-propylene ter-polymer and polymers with functional groups of the mixture are studied. Low efficiency of some compositions based on ethylene and propylene copolymer limits their use in the production of tires and rubber products. Therefore, we conducted a study to improve the disadvantages of SREPT-60 using butyl rubber + choro polyisoprene + butadiene-nitrile + butadiene styrene rubber and adding a plasticizer to the composition = α, methacrylate-(bis-diethylene glycol phthalate) -(btegf-9) The data obtained showed that a number of its indicators of rubber based on them were improved. Tear resistance, resistance to repeated stretching increased, adhesion of the composition to metal, chemical resistance increased, the degree of swelling in benzene and gasoline-benzene mixture decreased. Compositions based on the mixture SREPT-60 using butyl rubber + choro polyisoprene + butadiene-nitrile + butadiene styrene rubber and adding a plasticizer to the composition = α, methacrylate-(bis-diethylene glycol phthalate) -(btegf-9) +Dioctyl phthalate: (70:20:10) have high resistance to swelling in an aggressive environment (Benzene, gasoline, alcohol, acid, oil, etc.) mixture.

The stinging nettle caterpillar, Darna pallivitta (Lepidoptera: Limacodidae) is a serious invasive pest of agricultural products and a health hazard on the Hawaiian Islands first discovered in 2001. Nursery workers and homeowners have been stung by the caterpillars while handling their plants, especially rhapis palms (Rhapis sp.). Throughout its invaded range, it causes widespread damage including the many cultivated and native palm species grown in Hawaii. Of medical importance are the stinging spines of the larva, which cause dermatitis on contact with the skin. Horticulture and nursery products impacted by the limacodid pest are estimated at $84.3 million (2018 value). An eradication attempt with pesticides and lure traps was made but proved unsuccessful and the moth population continued to spread to major Hawaiian Islands (Hawaii, Kauai, Maui, Oahu). The introduction of specific biological control agents from the native region was thought to be the long-term solution for this invasive pest. Initial exploration in Indonesia and Thailand resulted in the introduction of a pupal ectoparasitoid, Nesolynx sp. (Hymenoptera: Eulophidae: Tetrastichinae), that was not specific. The oriental wasp, Aroplectrus dimerus Lin (Hymenoptera: Eulophidae: Eulophinae), idiobiont gregarious ectoparasitoid of the stinging nettle caterpillar, was introduced from Taiwan in 2004 for host specificity studies and biocontrol in Hawaii. Host range testing showed the parasitoid attacked only limacodid species and it was approved for field release in 2010. The parasitoid identity, host specificity under containment facility conditions, reproductive performance, colonization on the major infested sites were assessed. A total of 13379 parasitoids were colonized on162 release sites on four Hawaiian Islands. Evaluations were conducted using field surveys of larvae, pupal counts, and male lure traps. Field parasitism was thoroughly investigated on Oahu Island averaging 18.9 ± 5.6 % of 3923 collected larvae during 2010 – 2023. The numbers of male moths caught/trap/month were significantly reduced on Oahu Island (P

The digital transformation in Industry 4.0 has revolutionized quality control paradigms, integrating advanced technologies such as augmented reality, deep learning, and computer vision systems into a new era called "Quality 4.0". This study systematically reviews how these technologies are shaping new practices in continuous quality supervision and improvement, adapting to increasingly automated and connected production environments. Through a comprehensive analysis of the literature, practical applications in various industrial sectors, from manufacturing and agriculture to the production of sweets and snacks, are highlighted. Additionally, the conceptual and detailed design of a quality control system using artificial intelligence tools is presented, focusing on the inspection of dimensions, color, weight, and labeling of MDF boxes. The proposed system demonstrates an effective integration of sensors, high-definition cameras, and deep learning algorithms, validated through tests with boxes of different sizes. The results suggest that the adoption of these technologies not only improves the accuracy and efficiency of inspections but is also essential to maintaining high-quality standards in a dynamic and competitive industrial environment.

Antioxidant, anti-inflammatory and chemo-preventive features have been reported for the carotenoid diatoxanthin. Diatoxanthin is only produced by a few groups of microalgae where it functions in photoprotection. Its large-scale production in microalgae is currently not feasible. In fact, rapid conversion into the inactive pigment diadinoxanthin is triggered when the cells are removed from the high-intensity light source, which will be the case during large-scale harvesting of microalgae biomass. Zeaxanthin epoxidase (ZEP) 2 and/or ZEP3 have been suggested to be responsible for the back-conversion of high-light accumulated diatoxanthin to diadinoxanthin in low light in diatoms. Using the CRISPR/Cas9 gene editing technology we knocked out the ZEP2 and ZEP3 genes in the already commercially used marine diatom Phaeodactylum tricornutum to investigate their role in the diadinoxanthin-diatoxanthin cycle, and to determine if one of the mutant strains could function as a diatoxanthin production line. Light shift experiments proved that ZEP3 encodes the enzyme converting diatoxanthin to diadinoxanthin in low light. Loss of ZEP3 caused the high-light accumulated diatoxanthin to be stable for several hours after the cultures had been returned to low light, suggesting that zep3 mutant strains could be suitable as commercial production lines of diatoxanthin.

This qualitative research explores the integration of sustainability into procurement practices through the perspectives of supply chain practitioners. The study examines key challenges, strategies, and perceived benefits associated with sustainable procurement across diverse industries. Data were collected via semi-structured interviews with purposively sampled participants renowned for their expertise in procurement and sustainability. Thematic analysis revealed that while regulatory compliance, supplier engagement, and cost considerations pose significant challenges, strategies such as collaborative partnerships, embedding sustainability criteria into procurement contracts, and leveraging technology are pivotal in promoting sustainable procurement. Participants highlighted benefits including enhanced brand reputation, improved operational efficiencies, and strengthened stakeholder trust. Leadership commitment and organizational culture emerged as critical drivers of successful sustainable procurement initiatives, influencing employee engagement and organizational resilience. Looking forward, emerging trends such as circular economy principles and the integration of sustainability into corporate strategies are identified as transformative for future procurement practices. The study underscores the strategic importance of sustainability in enhancing organizational resilience, mitigating risks, and creating long-term economic, environmental, and social value. By addressing challenges, leveraging effective strategies, and embracing emerging trends, organizations can position themselves as leaders in sustainable procurement, contributing positively to global sustainability goals and gaining competitive advantage.

In order to foster a more sustainable and eco-friendly trajectory for the construction industry, while concurrently mitigating environmental pollution and energy inefficiency, it is imperative to cultivate an environmentally conscious building and urban environment. Under the background of carbon peak and carbon neutrality, green building evaluation system (GBRS) has become a research hotspot in the field of green building. This paper systematically summarizes the current research progress based on GBRS, focuses on the current weight and indicators setting, analyzes it with Cite Space software, and puts forward its future development direction. The results show that the weight setting method of green building evaluation system is determined by multidimensional and multi-method. From the perspective of environment, society and economy, the scope of indicators setting is expanding. The green building evaluation system will play a guiding role in green building design, and the evaluation process will continue to be optimized and developed in the direction of intelligence and automation.

Density is a crucial parameter for quantitatively describing the physical properties of liquids. It serves as an important indicator for scientific research, production process control, pipeline transportation, and other aspects. In oil pipeline transportation and raw material processing, real-time online measurement of liquid density is of great significance. This paper analyzes the working principle of an on-line vibrating tube densitometer and derives the fitting equation for temperature, pressure, and density；it also conducts experiments with an on-line vibrating tube liquid densitometer and establishes a traceability chain for the experimental device. The experimental setup includes a desktop densitometer system, a multi-temperature field constant temperature stirring system, a walk-in constant temperature box, an automatic blowing system, and a frequency acquisition and calculation system. The uncertainty of the device's evaluation is U= 0.08kg/m3, k=2.The experimental research on the on-line vibrating tube liquid densitometer can be carried out within the range of (650~1400) kg/m3, (10~70)℃, (0~50)bar the metrological performance of the vibrating tube densitometer can be researched by utilizing the straight tube type and the elbow type on-line vibrating tube densitometer. A preliminary study was conducted on the effects of different densities, temperatures, and pressures on the vibrating tube system's vibration cycle. The fit coefficient and error were calculated, and the experimental results were compared to the theoretical analysis to confirm the device's conformity. The study verified the device's scientific and reasonable design, and demonstrated that it is feasible to use the device for follow-up research.

In the dynamic landscape of the telecommunications industry, understanding and mitigating customer churn is paramount for maintaining competitive advantage and sustaining revenue streams. This comprehensive literature review delves into the intricacies of customer churn prediction, a crucial aspect in fortifying the bond between telecom businesses and their customers. The review methodically analyzes 11 articles published between 2000 and March 2024, spotlighting the strategic role of Customer Relationship Management and the prevalence of high churn rates that necessitate a shift from customer acquisition to retention strategies. Furthermore, the review navigates through the challenges inherent in churn prediction, including the complexities of managing large, imbalanced, and noisy datasets and the intricacies involved in model selection and optimization. Despite these challenges, the paper highlights the superior capability of machine learning techniques in handling complex datasets to provide accurate predictions, albeit acknowledging their practical complexities. The main aim of the study is to provide an overview, serving as a knowledge base for researchers interested in machine learning techniques within the realm of telecommunications.

Brand trust holds significant importance in the Mongolian cashmere industry. This study examines the primary predictors of customer brand trust among Mongolian cashmere users. Our research includes a survey with 800 participants and 20 individual interviews conducted among both Mongolian cashmere users and non-users. We utilized an online platform to reach participants, employing convenience sampling. The study investigates the relationship between various factors and brand trust within the context of Mongolian cashmere brands. Through a combination of in-dividual interviews and statistical analysis, we test six hypotheses. The findings indicate that higher brand quality, a strong reputation, greater transparency, effective issue resolution, commitment to environmental and social responsibility, and pre-purchase research on such commitments positively impact brand trust. Key insights gleaned from the interviews emphasize the importance of quality, reputation, transparency, customer service, and environmental responsibility in shaping consumer trust. These results offer valuable implications for cashmere brands aiming to bolster consumer trust and foster loyalty.

Since the discovery of the phenomenon of surface-enhanced Raman scattering (SERS), it has gradually become an important tool for the analysis of material compositions and structures. The applications of SERS have been expanded from the fields of environmental and materials science to biomedicine, due to the extremely high sensitivity and non-destructiveness of SERS-based analytical technology that even allows single molecule detection. This article provides a comprehensive overview of Surface-Enhanced Raman Scattering (SERS) phenomenon. The content is divided into several main sections: basic principles and the significance of Raman spectroscopy; historical advancements and technological progress in SERS, as well as various practical applications across different fields. We also discussed how electromagnetic fields contribute to the SERS effect, the role of chemical interactions in enhancing Raman signals, modeling and computational approaches to understand and predict SERS effects.

Self-sustained learning (SSL) is considered a crucial factor in promoting students’ long-term learning and development in a sustainable society. To deepen the understanding of SSL, especially in the context of learning English as a second language, the current study examined the influence of intercultural communicative skills, language mindset, and positive L2 self on SSL in English learning among 1,238 college students in China. The results showed that students not only had a strong language mindset, positive L2 self, and intercultural communicative skills but also scored higher in long-term self-sustained English learning. Findings from the Structural Equation Modeling indicated that both language mindset and intercultural communicative skills positively predicted positive L2 self and self-sustained English learning. Furthermore, language mindset and intercultural communicative skills had an indirect impact on self-sustained English learning through positive L2 self. These findings suggest that to promote English learners’ SSL, instructors should help facilitate students’ intercultural communicative skills and foster a growth language mindset, as well as positive language learning beliefs.

In this study, the microbial community during the barley yeast fermentation of stevia leaves and its correlation with antioxidant, antiobesity, and anti-inflammatory properties, as well as metabolites, were investigated using UPLC-Q-TOF-MS. Stevia was fermented using commercial TSB media (TSB 1, TSB 2, and TSB 3) and sucrose (Sucrose 1, Sucrose 3, and Sucrose 3) for 1, 3, and 5 days, respectively. Stevia ferments showed higher DPPH and ABTS radical scavenging capacity compared to samples incubated with sucrose for 5 days, and all six ferments inhibited nitric oxide production in a concentration-dependent manner in LPS-induced mouse macrophages. Furthermore, UPLC-QTOF-MS analysis identified 23 related substances, including 10 terpenoids, including rubusoside, steviolbioside, and rebadioside derivatives; dulcoside A; and phlomisoside II, which are indicators of stevia, as well as five flavonoids, four phenolic acids, and four fatty acids. We also identified the microbial community during fermentation via the next-generation sequencing of the 16S rRNA gene for bacteria and the internal transcribed spacer (ITS) gene for fungi. The results showed that TSB 1 and Sucrose 1 ferments were dominated by the pathogens Enterococcus hirae (58.93%) and Cronobacter sakazakii (80.92%), while samples fermented for more than 3 days were pathogen-free and dominated by lactic acid bacteria such as Pediococcus stilesii (73.37%). Microbial community analysis using the ITS region showed that Saccharomycopsis fibuligera, classified as a yeast rather than a mold, dominated the stevia fermentation regardless of the fermentation duration. In particular, the microbial community of the fermentation with a sugar solution was dominated by S. fibuligera by more than 99% throughout the fermentation periods of 1, 3, and 5 days. Finally, to apply the stevia ferments topically to human skin, skin irritation tests were performed on 30 volunteers. The results showed that the highly concentrated extracts (1 mg/mL) of all six stevia ferments were hypoallergenic. Taken together, these findings suggest that brewer's yeast fermented from stevia leaves with a sugar solution offers promise as a natural ingredient for use in functional foods and cosmetics.

This study investigates the impact of circular economy (CE) strategies on organizational resilience (OR) within the metal industry, focusing on a case study of a forging department in a large man-ufacturing company. The idea of the paper is to link the macroeconomic topic of circular economy (CE) with microeconomic and practical activities in the organization, exploring how CE principles can improve resource efficiency, sustainability, and organizational resilience. A systematic literature review and case study methodology were used to assess the relationship between CE and OR. The findings reveal that companies with higher circularity demonstrate better resilience, both in normal operations and during crises. Specifically, in the case study, the closure of the forging department, following a detailed analysis using the Inputs-Mediators-Outputs (IMO) model, emerged as the most sustainable option, yielding financial, environmental, and operational benefits. This decision aligned with the company’s long-term goals of energy efficiency and carbon neutrality. The research highlights the significance of integrating CE strategies with business processes to not only achieve sustainability but also to build a more adaptable and resilient organization. Future research should explore broader applications of this framework across different industries to strengthen the links between circular economy practices and organizational resilience.

While many practitioners and experts understand the risks associated with low urban tree diversity, they often lack the ability to rectify issues they encounter on their own. The current system of tree production and procurement is complex – shaped by market pressures, nursery and site constraints, local governance, and differing professional objectives among those who grow, specify, and plant trees. To understand this complexity as well as constraints to- and opportunities for increasing urban tree diversity, we conducted a series of focus groups comprised of nursery growers, landscape architects, and urban foresters. Our results highlight a significant list of considerations and constraints to diversity (both shared among green industries and some specific to growers or purchasers). More importantly, in discussing our findings we outline actionable strategies for increasing urban tree diversity.

By introducing environmental mediator, for avoiding randomness in selecting indicators and subjectivity in deciding interaction path coefficients to reveal interaction mechanism among forest industry, ecology and environmental capacity, structural Pressure–State–Impact–Response (PSIR) and quantitative Structural Equation Modeling (SEM) are utilized with data on thirty–one provinces of China. We can find that: (i) forest industry has a negative influence on ecology, whereas ecology has a positive influence on industry; (ii) the destructive influence that industry has on ecology is much greater than the positive effect ecology has on industry; and (iii) environmental capacity plays a partial mediating role between industry and ecology. According to these results we can conclude that: (i) forest industry and ecology are not in a symbiotic relationship and have not reached a level of ecological security; (ii) the interaction between industry and ecology is in a period of transition from antagonistic to beneficial; and (iii) industry dominates ecology. However, we prospect the following advice: (i) methods of forest industry should be changed; (ii) new modes of industrial integration and circular economy should be developed; and (iii) the ability of the environment to sustain itself should be enhanced. The level of forest ecological security to discuss the symbiotic mechanism of industry and ecology will propose to be measured in future.

Studies have demonstrated the critical role that safety plays in preserving favourable working conditions in the construction industry, which is necessary to accomplish goals. The aim of this research was to inform stakeholders in the construction industry in developing nations about the value of safety and possible strategies for influencing their opinions regarding safety protocols. The importance of safety to the construction sector, which is crucial to the advancement of the country, has also been emphasized. However, due to a lack of adequate safety understanding among stakeholders in the construction sector, the construction industry is characterized by a great deal of instability and hazard. To determine what factors, affect productive working conditions in the construction production, this study examined safety. A conceptual framework for safe working conditions in the construction sector was developed by considering several aspects, including the person dimension, environment factor, safety behaviour, organization features, technology, and incentives. It is now imperative to bring in these dimensions to improve the safe working conditions in the construction industry, particularly in the developing countries. By putting these safety factors into practice, the construction industry can reduce safety risks, lower the number of accidents and fatalities, cut expenses related to subpar safety performance, safeguard the reputation of construction companies, boost employee morale and satisfaction with their work, enhanced employee retention, reduced absenteeism, and enhanced sustainability goals. Additionally, the proposed conceptual framework is assured to be new and to be widely accepted in the developing nations. Based on this assumption the conceptual framework is designed.

Embracing Fourth Industrial Revolution(4IR) techniques is a need for a long-term sustainability and to do automation in the processes of Industrial and education sector. Rapid advancement in the information technology and other engineering technologies demand more proactive steps in the education institutes. In the post pandemic world, there is an increasing demand of changes in teaching and learning methodologies with the support of modern digital technologies. So, all of the teaching institutes need to have a significant step change in the areas of learning and teaching. The impact of 4 IR is more on the education sectors compared to previous generation’s industrial revolution. Keeping track of key technologies can be quite a challenge as they keep evolving at a very fast pace. Fourth Industrial revolution is the current technological digital revolution in which major focus is on cyber physical and biological systems such as Artificial Intelligence, Robotics, Internet on Things, Virtual Reality etc., The educators and institutions should establish the pedagogies and teaching with the aid of Industry 4.0 techniques to evolve education 4.0. So, it is very important to understand the challenges and competencies required about the implementation of 4IR by the faculty members and students who are currently studying in Higher Education Institutes (HEIs). This paper aim is to do a systematic review about industry 4.0 techniques and its application in relate to the online learning and teaching, change in pedagogies, enhancement of data management in HEIs, digital and virtual laboratories etc.

Land use and cover change (LUCC) is an important method to investigate the causes of global environment change. We utilized the emergy ecological footprint (EEF) model to construct a land-use change model to be used as a systematic measuring tool for monitoring sustainable development trends. In particular, we estimated the eco-security of the Cing-jing region as a case study so that responsible agencies can use it to maintain a balance between ecological preservation and tourism development. The results indicated the following: First, the ecological environment of the Cing-jing region satisfied the safety standard in 2008–2014; however, the related indices increased considerably. Second, the grey model predicted a decrease in 2015–2024 ecological carrying capacities of Cing-jing and a large increase in capita EFs, resulting in a larger ecological deficit and higher EFI. The eco-security from 2015–2024 was higher compared to 7 years ago and is predicted to reach the Grade 2 intermediate level in 2022; thus the Cing-jing region is gradually becoming ecologically unsustainable. Strengths of our study included the use of EEF theory in a quantitative analysis of slope lands for the effective evaluation of ecological security. Finally, we expanded our research to include ecological security issues.

Many requirements engineering tools have been existing for gathering, documenting and tracing requirements that can even be further processed for such purposes as analysis and transformation. In this study, we analysed 56 different requirements engineering tools for a comprehensive set of features that are categorised into multiple viewpoints (i.e., project management, specification, collaboration, customisation, interoperability, methodology, knowledge management). The analysis results led to many interesting findings. Some of them are as follows: (i) the project planning and execution activities are rarely supported, (ii) multi-user access and versioning are highly supported, (iii) the top-popular specification technique is natural languages, while precise specification via modeling languages is rarely supported, (iv) requirements analysis is rarely supported, (v) requirements transformation is considered for generating documents only, (vi) tool customisation via the tool integration and API support is highly popular, while customising the notation set is rarely supported, (vii) exchanging requirements is popular in such standards as ReqIF and Excel/CSV, while no single standard are accepted by all the tools, (viii agile development is very common, while other methodologies (e.g., MDE and SPLE) are rarely supported, and (viii) user-guide, telephone, e-mail, videos are the top methods for sharing knowledge. The analysis results will be useful for different stakeholders including practitioners, tool vendors and researchers.

Usage of antimicrobials in veterinary practices has always been under scrutiny due to the perceived risk of resulting in antimicrobial-resistant pathogens. This creates the necessity for understanding the role of the prescriber group. Hence, we conducted a cross-sectional survey among veterinary practitioners from August to November 2019 in the Chattogram district of Bangladesh, aiming to assess the practitioner’s perceptions regarding antimicrobial prescribing and antimicrobial resistance (AMR) issue. We collected responses from 100 veterinarians engaged in the treatment of the large animal, poultry, and pet animal through a self-administrated questionnaire. Proportions were calculated for categorical variables and the results are presented using visual aids. Our study revealed two key barriers - scarcity of enough information on antimicrobial used, and the lack of training in the proper prescription of antimicrobials. Participants recognized that prescribing too many varieties of antimicrobials and the use of an incomplete course of drugs as two very important causes for the development of antimicrobial resistance. In addition, prescription of inappropriate doses and incentives from pharmaceutical companies were dubbed as important causes. We also found that along with clinical features and types of organisms, the availability of drugs in the local market and the economic conditions of farmers have potential impacts on the antimicrobials prescribing decision of the veterinarians. However, all participants recognized the emerging threats of AMR. Results suggested that capacity building of veterinarians and the maintenance of strong coordination are crucial in ensuring the proper engagement of veterinarians as the front-line fighters for tackling the AMR issue.

Background/Objectives: Rehabilitation helps reduce disability in dementia. The Australian National Dementia Action Plan identifies a gap in clear treatment pathways post-diagnosis, affecting the quality of life for those with dementia. This study assessed the impact of a one-day dementia training course and follow-up on GPs' and practice nurses' knowledge, attitudes, and confidence regarding dementia rehabilitation. Methods: The training, led by two experienced GPs and an academic physiotherapist, covered dementia diagnosis, allied health roles, care planning, and referrals. The follow-up involved applying the learnt material and completing a reflective task. Three longitudinal surveys (Dementia Knowledge Assessment Scale - DKAS, General Practitioners’ Attitudes and Confidence towards Dementia Survey - GPACS-D, and Dementia Rehabilitation Scale) and Likert-scale statements were conducted pre-course, post-course, and at 4-month follow-up, alongside a focus group. Descriptive and regression analyses were applied to survey data, and content analysis was used for focus group data. Results: Seventeen participants (14 GPs, 3 nurses) completed the pre-post course survey, with eight (6 GPs, 2 nurses) participating in follow-up and focus group discussions. Post-course, DKAS scores increased by 12.1%, GPACS-D by 10.1%, and the dementia rehabilitation scale by 9.4%. Likert-scale statements improved by 8-79%. At the four-month follow-up, there was a slight, non-significant decline in most measures. Focus groups highlighted the training’s impacts, useful components, barriers, and suggestions for improvement. Conclusion: Training GPs and practice nurses in dementia rehabilitation enhances knowledge, awareness, and confidence. Ongoing efforts are needed to sustain benefits and address referral barriers for better access to dementia rehabilitation services.

The study of rare diseases is important not only for the individuals affected but also for the advancement of medical knowledge and a deeper understanding of human biology and genetics. The wide repertoire of structural information now available from reliable and accurate prediction methods provides the opportunity to investigate the molecular origins of most of the rare diseases reviewed in the Orpha.net database. Thus, it has been possible to analyze the topology of the missense mutations found in the 2,535 proteins involved in Mendelian rare diseases (MRD), which form the database for our structural bioinformatics study. The amino acid substitutions responsible for MRD show different mutation site distributions at different three-dimensional protein depths. We then predicted the depth-dependent effects of mutations for the 20,248 pathogenic variants that are present in our database. The results of this structural bioinformatics investigation are relevant, as they provide additional clues to mitigate the damage caused by MRD.

Matters relating to preservation of environmental resources and climate change, social inclusion and diversity, and open and sound governance have rapidly gained global attention. However, little is known about the construction industry in meeting the environmental, social and governance (ESG) criteria towards sustainable development. In this study, the purpose is to identify the key ESG indicators for construction development. A systematic literature review was undertaken using data from Scopus, PubMed, Google Scholar, JSTOR, ProQuest, and Web of Science. The results show some of the key ESG indicators as climate resilience and green construction activities (at the project level), and active stakeholder engagement and effective project governance (at the firm level) and meeting environmental and social regulation requirements (industry/national level). The limitation of the article is in the sample size of twenty-six journal articles with future expectation of increment as ESG gain more acceptance in the construction industry. This study will be significant for the design of practice framework and policies on ESG in the construction industry. Comprehensively, this study presents relevant ESG indicators for construction management and presents essential information for future research.

Automobile industry is recognized as one of the most influential sectors shaping the global economies, societies, and individual lifestyles. Therefore, fierce competitions among different companies are continuously undergoing, and innovations deserve special attention to improve the competitiveness. In the past several years, additive manufacturing (AM) is emerging as an innovative technology in the applications of automobile industry with significant advantages over traditional techniques. As a result, increasing attention has been attracted to combining AM technology with the development of automobile industry. Currently, many automobile players are optimizing their industrial layout by incorporating with innovative AM techniques, and meanwhile, many research progresses have been achieved to meet the market demand. This article aims at presenting a timely review to conclude the recent advances in the application of AM techniques in automobile industry, focusing on the available AM techniques, printable materials, and the industry applications. The future research opportunities and challenges are also outlooked. Hopefully, this work can be useful to the related researchers, as well as the game players in the industry of this field.

This study examines the environmental challenges faced by Malaysian industries in adhering to industrial effluent regulations with the research question, what are the challenges in complying with environmental legislations from industries? It investigates the primary factors contributing to non-compliance and the perspectives, knowledge, and needs of Malaysian industries regarding environmental compliance. This study recommends the best strategy for promoting self-compliance. Thirteen stakeholders from various industries with environmental management experience were interviewed. Over the past seven years, these industries have shown low com-pliance with the Industrial Effluent Regulation 2009, prompting an exploration of their adaptability to regulations. Challenges identified include cost, employee attitudes, technology, management support, public complaints, and jurisdictional issues. Responses varied from divergent to unified viewpoints, highlighting the complexity of compliance issues. Respondents suggested enhancing compliance through behavioral changes, including incentives, enforcement, awareness, guidance, industry ratings, management commitment, and public disclosure of emissions. Suggestions for improvement and innovative solutions emerged based on participants' experiences, emphasizing the importance of continuous improvement. The study emphasizes the government's crucial role in ensuring regulation adherence but underscores the need for analyzing barriers and exploring alternative approaches. Understanding industry perspectives and strategies is essential for progress. Compliance, however, requires an analysis of the current challenges and adopting adaptive measures. It is important to understand industries' perspectives and strategies to move forward.

In an attempt to reuse fibrous textile waste and, at the same time, to address dye pollution in textile wastewater, waste cotton-based yarn was utilized as both a cheap and sustainable adsorbent and a precursor for carbon adsorbent production. Cotton and cotton/polyester yarn samples underwent thermal modification through carbonization followed by chemical activation with KOH. Various techniques including nitrogen adsorption-desorption isotherms, scanning electron microscopy, Fourier transform infrared spectroscopy, and surface charge determination were employed to analyze the morphological and surface properties of the cotton-based adsorbents. Adsorption properties were evaluated by testing the removal of selected cationic and anionic dyes from water. The impact of temperature, contact time, initial concentration, and pH of the adsorbate solution on adsorption was investigated, with experimental data analyzed using theoretical models. While carbonization alone did not significantly enhance adsorption properties, activated samples exhibited high efficacy in removing both cationic and anionic dyes from water. Despite the negative influence of the polyester component in the carbon precursor on the efficiency of activated samples in removing methyl orange, results indicated that activated cotton and cotton/polyester yarn could be used to prepare highly efficient adsorbents for the rapid removal of methylene blue from real wastewater samples.

(1) Background: This study examines the intention to behave actively prevent COVID-19 among local tourism practitioners by adopting an empirically validated norm activation model (NAM) of Schwartz and merging it with the Expectancy theory of Vroom; (2) Methods: The study aims to develops a theoretical framework for understanding the formation and predicting the change of personal protective intention to prevent COVID-19. Based on 514 valid responses from the field surveys; (3) Results: The author develops the refined model including 7 constructs and 26 observational items, and the results showed that the refined model has enjoys a better predictive accuracy of protective intention than the original NAM; and (4) Conclusions: The intention of preventing COVID-19 should needs wider public support and advocacy, and recognizing the change rule of improving behavioral intentions of preventing COVID-19 to maintain the safe tourism image of tourist attractions in Zhangjiajie is also benefits for local tourism practitioners.

Against the backdrop of the European Union's commitment to achieve climate neutrality by 2050, efforts to improve energy efficiency are being intensified. The manufacturing industry is a key focal point of these endeavors due to its high final electrical energy demand, while simultaneously facing a growing shortage of skilled workers crucial for meeting established goals. Expert systems (ESs) offer the chance to overcome this challenge by automatically identifying potential energy efficiency improvements and thereby playing a significant role in reducing electricity consumption. This paper systematically reviews state-of-the-art approaches of ESs aimed at improving energy efficiency in industry, with a focus on manufacturing. The literature search yields 1668 results, of which 62 articles published between 1987 and 2024 are analyzed in depth. These publications are classified according to the system boundary, manufacturing type, application perspective, application purpose, ES type, and industry. Furthermore, we examine the structure, implementation, utilization, and development of ESs in this context. Through this analysis, the review reveals research gaps, pointing toward promising topics for future research.

The development of biofuels and biodiesel industry specifically, has resulted in the generation of large amounts of glycerol as a surplus. The conversion of glycerol, into chemicals with indus-trial interest, through anaerobic fermentation using E. coli as a biocatalyst is an attractive alter-native to improve economic performance in the biodiesel industry, for example through the bi-otransformation of residual glycerol into ethanol. For 2019, the size of the global ethanol market was valued at $ 89.1 billion US dollar. Biodiesel can be produced from several materials like rapeseed, palm, soya, corn, palm kernel, frying oil or olive-pomace oil (OPO). The last, can be extracted from alperujo, byproduct of olive oil process. However, olive-pomace oil converting into biodiesel is not enough established to achieve a global olive-oil/biodiesel derived process with minimized waste generation. Traditionally biodiesel production process produces an equivalent of 10% by mass of glycerol as a waste or by-product. This work explores the conver-sion of residual glycerol into chemicals like ethanol and hydrogen with a focus on projecting raw material potential availability from OPO, contributing to the promotion of the use of biofu-els and biodegradable compounds.

Background: Schistosomiasis is the third most important Neglected Tropical Disease, with more than 4 million South Africans being infected. Cases of re-infection with schistosomiasis after being treated using modern medication has opened ways to seeking alternative treatment modalities using medicinal plants. This study aims to explore and understand the way traditional healers diagnose schistosomiasis, the types of traditional medicines they use to treat it in communities with a high prevalence of infection, and to establish whether the unavailability of prescribed anti-schistosomal medicines leads to the use of traditional medicine. Methods: A qualitative exploratory study was conducted using a questionnaire from December 2022 to March 2023 in the iLembe District, KwaZulu-Natal Province, South Africa. In-depth individual interviews were carried out among traditional health practitioners (THPs) involved in managing female urogenital schistosomiasis (FUS). Recorded narrative data was transcribed verbatim, read through thoroughly and coded, and analysed using thematic or content analysis Results: Traditional Health Practitioners provide services to many women who did not want to be treated in the mainstream health care system for their FUS. The disease was perceived and understood the same way by most of the respondents, that being caused by use of fresh water. Various plants species, either alone or in combination, were used to manage bilharzia in women. Senecio serratuloides (Asteraceae) and Hypoxis hemerocallidea (Hypoxidaceae) were prominently used by THPs in FUS management. Conclusion: Traditional Health Practitioners are playing a key role in managing bilharzia in women in rural areas of the iLembe District, this study reported that THPs can diagnose schistosomiasis symptoms based on their knowledge and experience. Respondents indicated that modern conventional treatment was readily available and free in public sector healthcare facilities; however, they consulted patients suffering from FUS. Various traditional herbal medicines are reportedly used by THPs to manage bilharzia in women. Further studies are needed to investigate the views and experiences of clients regarding the success of the treatments used and why they seek care from THPs.

With the increasing interest in CM as a potential source of nutrients and bioactive compounds, there arises a necessity to delve into methods for its processing and drying. Over recent decades, a significant amount of research has been conducted on the chemical composition of CM and its potential health benefits. Consequently, this study is directed towards examining CM drying technology, including an analysis of the influence of different drying methods on its chemical composition and nutri-tional properties. The objective of this review is to systematically summarize the available literature on CM drying processes and their impact on its chemical composition. Special attention is devoted to comparing various drying methods such as freeze-drying, spray drying, and freeze-drying, as well as investigating factors affecting the quality of dried CM. To achieve this goal, we scrutinize a series of studies published between 2003 and 2022 to identify optimal drying methods that promote the maximum preservation of CM's nutritional components and bioactive compounds. Additionally, we explore possibilities for reducing drying time to enhance production efficiency. This research is grounded in the analysis of data from diverse scientific research databases, including Scopus and Google Scholar, encompassing a systematic review of scientific literature and a comparative analysis of the obtained results.

Biosolids from stabilized sludge presents a high fertilization potential due to its rich content of nutrients and organic matter. Three formulas of organo-mineral fertilizers based on biosolids were manufactured having at least 2 % N, 2 % P2O5, and 2 % K2O and characterized by classical and advanced methods. The content of N and P in the final formula was measured using specific reactants combined with VIS-nearIR spectroscopy. Additionally, all three formulas were characterized by advanced 1H NMR relaxometry, double-quantum and FT-IR spectroscopy. Structural characterization was performed using SEM, EDX and X-ray diffraction. Four dynamical components were identified in the T2-distribution showing that the rigid component is into a percentage larger than 90 %. In order to evaluate the release properties of organo-mineral fertilizers dynamic measurements of electric conductivity and pH were performed, by placing 0.25 g of formulas (V1, V2 and V3) in 200 ml of distillate water. It was found that V3 present the smallest release velocity, but release the largest amount of fertilizers. Two release mechanisms were also observed.

The effects of rare earth Ce on the microstructure and properties of cast pure copper were investigated through thermodynamic calculations, XRD analysis, mechanical testing, metallographic microscopy, and scanning electron microscopy (SEM). The experimental results demonstrate that the reaction between rare earth Ce and oxygen as well as sulfur in copper exhibits a significantly negative Gibbs free energy value, indicating a strong thermodynamic driving force for deoxidation and desulfurization reactions. Ce is capable of removing trace amounts of O and S from copper. Moreover, the maximum solid solubility of Ce in Cu falls within the range of 0.009% to 0.01%. Furthermore, Ce can refine columnar grains while enlarging equiaxed grains in as-cast copper.Upon addition of rare earth Ce, the tensile strength increased by 8.45%, elongation increased by 12.1%, and microhardness rose from 73.5HV to 81.2HV-an increase of 10.5%. Overall, rare earth Ce has been found to enhance both the microstructure and mechanical properties of cast pure copper.

Context: Business Process Automation (BPA) is adopted by organizations to improve efficiency, reduce costs, and increase overall business performance. Traditional Business Process Automation (TBPA) is one of the three approaches employed to develop a BPA. TBPA entails developing BPA in a programming language for integrating the relevant applications in the digital ecosystem to execute a given process. Process variability and practitioner unavailability encumber the requirements specification for TBPA software. Objective: This work proposes a log-based approach for TBPA software to make software more adaptable to process changes and reduce reliance on practitioners, by providing a higher alignment among business process requirements and software architecture, and employing process mining to semi-automatically discover the business process during requirements elicitation. Method: The research conducted a case study in a technology institute to assess the approach and report its results in practice. Results: The results revealed significant improvements in adaptability to business process changes and decreased the time spent with practitioners, and, efficiency in development. The approach also presented limitations, including human intervention to accurately obtain the business process, complexity to trace the process into the architecture, data privacy concerns, and risk of network traffic overload. Conclusion: This research demonstrated the effectiveness of traceability between process requirements and software architecture, as well as the use of logs and process mining. These methods made TBPA software enhanced the software adaptability to changes and minimized the reliance on practitioners during requirements elicitation respectively.

The goal of the study presented in this article is to investigate interconnection issues of the Intelligent Electrical Networks (IENs) with the existing ones, as well as the deployment of the appropriate load forecasting demand techniques. The concept of IENs has recently emerged as a potential solution to the global energy problem, due to the more flexible dispersed production units that are involved. In the same context, additional issues, such as the reduction of production-transfer-distribution costs as well as power losses are analyzed as well, via the penetration of Renewable Energy Sources (RESs). To this end, it is necessary to use appropriate advanced infrastructure, where in combination with modern telecommunication networks will make possible the full exploitation of IENs. Moreover, to make the electricity system more efficient, to avoid voltage and frequency imbalance issues and to implement optimal production and consumption planning, the Electric Load Forecast (ELF) is a vital process and plays a key role in the planning as well as in the management of electricity systems. Therefore, recent state of the art approaches in ELF methods are discussed as well.

The fast fashion industry has a significant impact on the environment at every stage of the product life cycle. There is a lack of research in the literature on the impact of fast fashion on the environment through logistics and transport. In this area, the greatest environmental impact is caused by air emissions, which is very important from the point of view of climate change. Therefore, this article deals with the analysis of the carbon footprint resulting from the fast fashion logistics process. The identification and assessment of fast fashion companies' sustainability efforts in the area of transport-related emissions and sustainable transformation strategies was conducted using a case study method for selected brands (H&M Group; Inditex, Shein). The study uses secondary data available in non-financial reports from 2023. After analyzing the data and content in non-financial reports on transport-related emissions, sev-eral important conclusions emerge. As a dominant practice, companies emphasize their reliance on external frameworks and standards, in particular the Global Reporting Initiative and the Task Force on Climate-related Financial Disclosures. Companies prioritize reducing emissions from significant factors, such as production processes. The data disclosed in the reports (scope 1, 2, 3) are not clearly formulated, but they can be used to calculate the level of CO2 emission reduction/increase. The ar-ticle contains recommendations for companies to improve their reporting by including additional indicators expressing the efficiency of transport-related emissions.

EIMIs face the challenge of adapting to the Paris Agreement and the European Green Deal to achieve carbon neutrality. This change is being driven by consumer interest in low-carbon products, regulatory requirements from climate agreements and investors prioritizing sustainability. This pressure is pushing companies to go beyond short-term financial gains and integrate sustainability into their business. The growing awareness of the environmental impact of business models (BM) has fueled the development of Sustainable Business Models (SBMs). This study aims to link the discussion on the role of SBMs in the drivers of decarbonization, to improve the understanding of how the drivers can be integrated and enable new BMs for EIMIs. Based on a structured literature review, semi-structured interviews were conducted in the EIMIs. The study identifies BM-components that are influenced by these drivers and require sustainable business model innovation (SBMI). The results show that decarbonization drivers have a significant impact on all BM components. Experts emphasize the importance of collaborative approaches and cooperation throughout the value chain. This research elaborates on the importance of systematic analysis to understand how companies can effectively manage decarbonization drivers and suggests in-depth exploration within BM-research to uncover potential SBM design options.

Background: Across the world, antibiotic resistance is a grave problem. To address this issue, it is necessary to investigate new antibiotic sources. Aim of the study: Egypt's diverse soil habitats were used to produce bacterial Myxopyronin B, which was then tested for antimicrobial activity in preclinical animal studies and randomized human clinical trials stages 1/2. Type of the study: Screening experimental study. Methodology: Egypt's various soil conditions were examined for the development of bacterial isolates that produced the antibiotic compound Myxopyronin B. Reversed phase HPLC was used to purify Myxopyronin B. To determine the test antibiotic's minimum inhibitory concentration( MIC) and invitro antibacterial activity, the Broth microdilution method and the Paper disc diffusion assay were utilized. Moreover, in vivo antibacterial spectrum, adverse medication responses, and pharmacokinetics were found in preclinical animal testing stages and phases 1/2 of randomized clinical studies involving volunteer humans. Results: Myxopyronin B was generated from the culture supernatant of Myxococcus SDU36, the main soil bacterial isolate cultured on a Casein yeast peptone plate. With MICs less than 100 mcg/ml, the test antibiotic prevented the growth of several Gram +ve bacteria, whereas, at MICs higher than 100 mcg/ml, it inhibited the development of a small number of Gram -ve bacteria, including Escherichia coli. However, eukaryotic cells—such as those found in fungi and humans—were unaffected. The test antibiotic was seen to inhibit prokaryotic DNA-dependent RNA polymerase( RNLP), indicating its bactericidal activity. Mean Cmax was 9-10 mcg/ ml at mean Tmax 1 hour when 600 mg dose was orally administered in randomized human clinical trials phases 1/2, and T1/2 reached 2.25 hours following first-order kinetics of elimination. Duration of its action was nearly 8 hours after oral administration. Rare toxicity was detected during preclinical and randomized human clinical trials phases 1/2 in the form of mild diarrhea and GI upset in less than 7 % of experimental candidates. It exhibited approximately 90% plasma protein binding, especially with albumin which resulted in prolonged therapeutic action. It showed a concentration dependant antibiotic killing effect. With the concentration-dependent killing pattern, the higher the drug concentration relative to the pathogen minimum inhibitory concentration( MIC), the greater the rate and extent of antimicrobial activity. Conclusion: The present study was promising due to the production of the bactericidal antibiotic Myxopyronin B from Myxococcus sp. SDU36 isolated from different soil environments in Egypt.

Chymotrypsin from the digestive organs of bigfin reef squid, a major commercial squid species in Thailand, was purified to 41.27-fold with 5.74% yield by a sequential purification process including ammonium sulfate precipitation, size exclusion and ion exchange chromatography. According to SDS-PAGE, the molecular weight of purified chymotrypsin was 43 kDa. Native-PAGE analysis revealed a single band for this purified enzyme. Optimum pH and temperature for chymotrypsin activity of the purified enzyme were pH of 7.0 with a temperatures of 55°C. The purified chymotrypsin remained stable throughout a wide range of pH levels (6–11) and at relatively high temperature (50°C). It was significantly inhibited by PMSF and TPCK. The values of the kinetic constants Km and Kcat were found to be 1.33 mM and 31.46 s‒1, respectively. The purified chymotrypsin has the N-terminal amino acid IVGGQEATPGEWPWQAALQV. This study provided new information about the biochemical properties of pure chymotrypsin from bigfin reef squid, which is useful in the future investigation, aquaculture and application of bigfin reef squid.

The decline in global pollinator populations has raised serious concerns about the sustainability of ecosystems and agricultural productivity. Urban environments, often characterized by habitat loss and environmental stressors, are considered challenging habitats for pollinators. However, urban green spaces, including street and ornamental trees, can play a crucial role in supporting pollinators by providing essential food resources. This study aimed to evaluate the sugar and amino acid production of eight urban tree species to determine their potential contributions to pollinator nutrition. Our findings revealed significant variability among species regarding nectar volume, sugar content, and amino acid composition, emphasizing the importance of considering multiple factors when assessing the utility of floral resources. Consequently, Tilia amurensis, Heptacodium miconioides, Aesculus turbinata, and Wisteria floribunda demonstrated superior potential in supporting urban pollinator communities. Contrastingly, Sorbus commixta, Styrax japonicus, and Cornus kousa, often favored for their aesthetic appeal, showed less potential. This study underscores the need for urban tree selection that prioritizes species that provide diverse and abundant nutritional resources for pollinators while balancing aesthetic and ecological values. Our results offer a foundation for better-informed urban biodiversity management and contribute to creating pollinator-friendly urban environments.

In order to help the transportation industry achieve the goal of carbon peak and carbon neutrality, this study is based on the selection of eight variables, such as population size, per ca pita GDP, personal vehicle ownership, passenger and freight turnover, and green space coverage, as the factors influencing the carbon emissions of the transportation industry in Jiangsu Province, and the prediction and analysis of the transportation carbon emission trends from 2000 to 2021, and the prediction and analysis of the carbon emissions of the transportation industry and the time of the peak of the carbon emissions in Jiangsu Province. The trend of transportation carbon emissions from 2000 to 2021 was predicted and analyzed, and the carbon emissions and peak time of carbon emissions in the transportation industry in Jiangsu Province were predicted and analyzed. Comparing the predicted results with other models to verify the accuracy of the results, it was found that the WOA-SVM model had the smallest error among several models. On this basis, targeted measures are proposed to accelerate the process of carbon peak and ensure the smooth achievement of carbon neutrality goals in Jiangsu Province. The results indicate that under the current policy measures, the peak carbon emissions in Jiangsu Province will occur in 2038, with a peak of 48.72 million tons. Jiangsu Province should actively adopt energy-saving and emission-reduction measures, build a green and low-carbon transportation development model, and achieve the carbon peak target ahead of schedule.

The Imbalance Cost Pass-Through (ICPT) is a flexible component of the Incentive Regulation (IBR) that empowers power producers to adjust tariffs in response to variable fuel prices, thereby enhancing the economic resilience of electricity generation. However, the cost of electricity generation is significantly influenced by the volatility of commodity prices, including coal, gas and LNG. In Malaysia, the Energy Commission has conducted biannual reviews of fuel and other generation costs. Any cost savings or increases identified during these reviews will be passed on to customers in the form of rebates or surcharges. Due to that reason, this study proposes ICPT price forecasting for the electricity market in Peninsular Malaysia. The study aims to construct an ICPT-related baseline model for the peninsular generation data by employing three forecasting methods. The forecasting performance is analysed by a Mean Absolute Percentage Error (MAPE). In findings, the ARIMA method is one of the most accurate forecasting methods for fuel prices compared to the Moving Average (MA) and LSSVM methods. The observed price differences between the ARIMA and LSSVM models for ICPT are minimal. The ICPT price for July-December 2022 and January-June 2023 is MYR 0.21/ kWh for ARIMA and MYR 0.18/kWh for LSSVM, which are close to the actual TNB’s ICPT tariff. As for the forecasting, the ICPT price is expected to drop for the next announcement. The findings of this study may contribute to a positive impact on the sustainability of the energy sector in Malaysia.

The Akosombo Nile tilapia is the only approved local strain for aquaculture production in Ghana. In this study, an exotic red tilapia sample suspected to be cultured in a fish farm within the Lower Volta River Basin of the Lake Volta was collected for species identification. A molecular screening using DNA barcoding sequencing was performed on the samples targeting the cytochrome C oxidase subunit 1 mitochondrial gene (COX1). We confirmed the identity of the red tilapia fish to be a non-native Oreochromis sp. recently introduced into the country. The data obtained clearly demonstrates a breach of biosecurity that potentially threatens Ghana’s native tilapia genetic resources and aquaculture development.

A single paragraph of about 200 words maximum. For research articles, abstracts should give a pertinent overview of the work. We strongly encourage authors to use the following style of structured abstracts, but without headings: (1) Background: Place the question addressed in a broad context and highlight the purpose of the study; (2) Methods: briefly describe the main methods or treatments applied; (3) Results: summarize the article’s main findings; (4) Conclusions: indicate the main conclusions or interpretations. The abstract should be an objective representation of the article, and it must not contain results that are not presented and substantiated in the main text and should not exaggerate the main conclusions. Python, a versatile programming language, holds vast potential for Sentiment Analysis (SA). Leveraging the Requests and TextBlob libraries, we have crafted a user-friendly code that enables Industrial Engineers (IE) and managers, particularly those who are new to Python, to extract and analyze sentiment efficiently. We aim to provide IE/managers in service companies requiring SA capabilities with a simple yet effective Python solution. While machine learning resources like PyTorch/TensorFlow are commonly utilized in SA, offering pre-built algorithms and tools for training, and implementing machine learning models, we sought to exploit Python's versatility by integrating additional web-scraping libraries. Thus, by using a lexicon-based approach, we intend to deliver an informative and practical article. The code in this article is twofold; firstly, it can be easily adapted by IE/managers possessing basic Python skills; secondly, we aim to inspire junior IE/managers to develop their own customized coding solutions tailored to specific organizational needs.

INTRODUCTION: While postmenopausal osteoporosis management evolved in recent years, it nonetheless remains underdiagnosed and undertreated. Given that general practitioners are the keystone of patient screening and referral in France, the present study was conducted to assess their professional positioning in the management of postmenopausal osteoporosis. METHODS: The present is a qualitative study based on semi-directed interviews, carried out between July 2020 and February 2021, with randomly chosen Alsatian general practitioners. Interviews were conducted until data saturation. Consolidated criteria for qualitative research reporting grid was used as well as Nvivo software to categorize the datas. RESULTS: Twenty-three general practitioners (GPs) were interviewed. Study participants recognized that the investigation and treatment of osteoporosis begins at a primary care level, typically with the GP. While some initiated screening by prescribing bone mineral density (BMD) assessments, only few prescribed the associated laboratory assessment and spinal X-rays in search of curable osteopathy or vertebral fracture. For those GPs who do take the opportunity to initiate treatments for patients, there is an understanding that first line options often include calcium and vitamin D, at a “preventive” level. The interviewed physicians interacted mainly with gynecologists and rheumatologists. Fracture liaison services were widely acclaimed. Several barriers were identified in their care management. The absence of a defined role between specialists and the lack of communication between the latter were an additional highlighted barrier. CONCLUSION: This study sheds further light on the discrepancy between the means available to treat osteoporosis, and the modest impact of the care observed.

Treating clubfoot in walking age children is debated, despite studies showing that using Ponseti casting principles can correct the mid-foot effectively. We aimed to explore techniques and approaches for management of older children with clubfoot and identify areas of management consensus. A mixed-methods cross-sectional electronic survey on delayed presenting clubfoot (DPC) was sent to 88 clubfoot practitioners (response rate 56.8%). We collected data on decision-making, casting, imaging, orthotics, surgery, re-currence, rehabilitation, multidisciplinary care and contextual factors. The quantitative data were analysed using descriptive statistics and the qualitative data were analysed using conventional content analysis. Many respondents used the Pirani score and some used the PAVER score to aid deformity severity assessment and correctability [1,2]. Ponseti casting principles were consistently applied with a stepwise approach. Con-textual factors influenced the timing of the treatment, the decision to treat a bilateral deformity simultaneously, and casting intervals. Differences were seen around orthotic usage and use of tibialis anterior tendon transfer following full correction. The survey identified consensus areas in overall principles of management for delayed presenting clubfoot and implementation of Ponseti principles, indicating these principles are well recognized as a multidisciplinary approach for older children with clubfoot. Some dif-ferences in approach may reflect different economic or social contexts. The principles can be adapted well for different geographical and healthcare contexts.

The present study seeks to assess the Brand Equity in the network of new fashion designers in the Canary Islands. To this end, we have adapted the Brand Equity model to an online context and proposed a set of metrics for four dimensions: estimate, relevance, awareness, and differen-tiation. The multidimensional approach to online Brand Equity was employed to measure the online Brand Equity of 129 fashion designers from the Canary Islands. The study's findings re-vealed that the number of social media profiles significantly impacts brand awareness and dif-ferentiation. Moreover, the digital maturity level influences brand relevance and overall Brand Equity . Our study highlights the practical value of web data-driven metrics for measuring online Brand Equity , which can be utilised for diagnostic, evaluative, or predictive purposes. The study's outcomes have substantial implications for marketers in the fashion industry aimed at improving online Brand Equity

The Mining Industry has changed significantly in recent decades with the introduction of advanced technologies such as Artificial Intelligence (AI) and Machine Learning (ML). These innovations contribute to the creation of expert systems that help in optimizing processes, increasing the safety and sustainability of operations. This article is a literature review of modern AI and ML methods and technologies used in the Mining Industry. Discusses various intelligent and expert systems used to improve productivity, reduce operating costs, improve occupational safety, environmental sustainability, machine automation, predictive analytics, quality monitoring and control, and inventory and logistics management. The advantages and disadvantages of different approaches are analyzed, as well as their potential impact on the future of the Mining Industry. The review highlights the importance of integrating AI and ML into mining processes to achieve more efficient and safer solutions.

Background: General Practitioners (GP) have an important role in the prevention of suicidal behavior. The purpose of this study was to explore their views and experiences of identifying and assessing suicidal ideation. Methods: Ten GPs were recruited through convenience sampling, based on accessibility, interest and willingness to participate. In-depth interviews were carried out and results transcribed ver-batim. Aspects of experiences with suicidal patients emerged through the thematic analyses process. Results: The GPs described the varied clinical picture when patients presented in their office. How they identified depressive symptoms apart from originally somatic complaints, formed a trusting relationship and addressed suicide ideation. They described customized interventions as well as obstacles and factors that facilitated communication: time, own personal traits, pa-tient’s disclosure and organizational barriers. Conclusions: The levels of the suicidal process among patients in general practice vary greatly. GPs adjust their appraisals to profundity understand and intervene in order to prevent a crisis to escalate into subsequent suicidal behavior.

This paper delves into the multifaceted domain of the aerospace industry, examining its evolution, current challenges, and imperative focus on quality management and process integration. The aerospace sector, driven by technological advancements and a burgeoning global demand for air travel and freight transport, necessitates a thorough analysis of its industrial fabric and operational intricacies. This research endeavors to analyze the dynamics of the aerospace industry, pinpoint its challenges, and propose an integrated approach to enhance efficiency, quality, and sustainability. The primary goals encompass understanding the evolving industry landscape, identifying critical challenges, and offering innovative solutions by amalgamating principles of Industry 4.0 into quality management and processes within the aerospace sector. Through an in-depth exploration of various facets, this research underscores the pivotal role of efficient processes and integrated quality management in achieving sustainable growth and competitiveness in the aerospace industry. By aligning with the paradigm of Industry 4.0, organizations can optimize their operations and contribute to the industry's advancement, delivering safer and more cost-effective aerospace products. The study adopts a multifaceted approach, incorporating extensive literature review, critical analysis of industry trends, examination of quality management frameworks, and a thorough evaluation of the integration potential of Industry 4.0 technologies. The research also involves case studies and expert insights to validate the proposed approach. The investigation reveals that by leveraging Industry 4.0 technologies and embracing an integrated approach to quality management, the aerospace industry can significantly enhance operational efficiency, product quality, and overall sustainability. The seamless integration of processes and the implementation of advanced quality frameworks pave the way for a more competitive and future-ready aerospace industry, meeting the evolving demands of a globalized world.

A suitable waste management strategy is crucial for a sustainable and efficient circular economy in the construction sector, and requires precise data on the volume of demolition waste (DW) gen-erated. Therefore, we developed an optimal machine learning (ML) model to forecast the quantity of recycling and landfill waste based on the characteristics of DW. A dataset comprising infor-mation on the characteristics of 150 buildings, demolition equipment utilized, and volume of five waste types generated (i.e., recyclable mineral, recyclable combustible, landfill specified, and landfill mix waste, and recyclable minerals) was constructed. ML models were developed to predict the quantities of such waste. Artificial neural network, decision tree, gradient boosting machine, k-nearest neighbors, linear regression, random forest (RF), and support vector regression were applied, and optimal models were derived via hyperparameter tuning. The RF model demonstrated superior performance. In both validation and test phases, the “recyclable mineral waste” and “recyclable combustible waste” models achieved accuracies of of 0.987 and 0.972, re-spectively. The “recyclable metals” and “landfill specified waste” models achieved accuracies of 0.953 and 0.858 or higher, respectively. Moreover, the “landfill mix waste” model exhibited an accuracy of 0.984 or higher. SHapley Additive exPlanations analysis highlighted floor area as the primary input variable influencing model performance. The type of equipment employed in demolition emerged as another crucial input variable impacting the volume of recycling and landfill wastes generated. The developed model can provide precise data on waste management, thereby facilitating the decision-making process for industry professionals.

Background: Breast cancer and other neoplasms like acute lymphocytic leukemia pose a serious threat to public health worldwide. Treatment for malignancies including acute lymphocytic leukemia and breast cancer requires enzymes that break down L-glutamine. An amidohydrolase called L-glutaminase can be an effective chemotherapeutic tool for treating various cancers. Methods: On mineral L-glutamine agar selective medium (MGA), a few bacterial isolates were examined in the current investigation to see if they produced L-glutaminase. However, the most effective positive bacterial isolates generating L-glutaminase were identified using morphological and biochemical testing. Molecular detection using the direct Southern blotting approach was also used to determine the main positive isolate that produces L-glutaminase. L-glutaminase synthesis by bacteria was evaluated for its characteristics. Using an MTT test, the anticancer activity was evaluated. Results: exclusive bacterial isolates that used L-glutamine as their sole source of metabolic nitrogen exhibited favorable growth on MGA. PH 7.4 and a temperature of 37 0C were the ideal environmental and physiological conditions for developing positive bacterial isolates. From the soil samples taken from various soil conditions in Egypt, the morphological and biochemical analyses showed that Bacillus cereus 14579 was the main positive bacterial generating L-glutaminase isolate. At a pH of 7.4 and a temperature of 37 °C, the following activators—KCL, ZnSO4, FeSO4, K2HPO4, and MgSO4—provided the high-grade circumstances for characterizing L-glutaminase synthesis. Bacillus cereus-produced L-glutaminase has shown excellent bioavailability and effectiveness as an anticancer therapy. The yield [productivity] was 5.2 U/ml during the original manufacture from MGA, but it increased to 42.96 U/ ml by bacterial recombinant DNA manufacturing. The molecular mass of L-glutaminase was roughly 37 KDa. L-glutaminase was purified, yielding final enzyme recovery of 55 1.23%, total activity 12,990± 19.76 ( U), specific activity 384.66± 8.92( U/ mg of protein), and purification fold 2± 2.99. Furthermore, the L-glutaminase activity was raised by 19%, 23%, 15%, and 9%, respectively, by the enzymatic activators Mn2+, K+, Na+, and Fe3+. It demonstrated strong DPPH scavenging activity (IC50 = 61 μg/ mL) and anticancer activity( IC50 = 40.72, 9.7, 7.39, 20.61, 51.28, and 11.55 μg/ mL, respectively) against human liver (HepG-2), colon ( HCT-116), breast ( MCF-7), lung( A-549), lymphocytic( CCL-120), and cervical( Hela) cancer cell lines. A stronger affinity for its substrate was shown by the kinetic parameters of Km and Vmax, which were 13.2 10-5 M and 119.86 μmol/ ml/ min, respectively. Conclusion: Acute lymphocytic leukemia and breast cancer are examples of auxotrophic malignancies for which L-glutamine serves as the only metabolic source, and L-glutaminase generated by Bacillus cereus was an appropriate enzyme in the therapy of these diseases.

Recycling waste products is an environmental-friendly activity that can bring benefits to accompany, saving manufacturing costs and improving economic efficiency. For the beer industry, recycling bottles can reduce manufacturing costs and reduce the industry's carbon footprint. This paper presents a model for a multi-objective collection-distribution center location and allocation problem in a closed loop supply chain for the beer industry, in which the objective is to minimize total costs and transportation pollution. Uncertainties in the form of randomness and fuzziness are jointly handled in this paper to ensure a more practical problem solution, for which returned bottle sand unusable bottles are considered fuzzy random variables. A heuristic algorithm based on priority-based global-local-neighbor particle swarm optimization (pb-glnPSO) is applied to ensure reliable solutions for this NP-hard problem. A case study on a beer operation company is conducted to illustrate the application of the proposed model and demonstrate the priority-based global-local-neighbor particle swarm optimization.

Traditional Health Practitioners (THPs) are considered as the entry level of care in African societies and play an important role in the delivery of health services to the population. A phenomenological qualitative study was carried out among pur-posefully selected THPs in Mthatha to understand their roles and the challenges they face in providing maternal health services. The study included a focus group discussion with seven participants, which yielded three themes and seven sub-themes. The content analysis of descriptive data from the focus group discussion revealed threats posed by unregistered and counterfeit THPs to the lives of pregnant women in rural settings. THPs' wide range of services allowed pregnant women to receive prenatal, antenatal, and postnatal care in close proximity. This level of care, however, was characterized by high levels of secrecy and counterfeit practitioners who used human body parts, which jeopardized the practice and made it unpopular. Traditional health practice must be protected through registration of THPs and the establishment of functional referral pathways between THPs and conventional health services.

Background: Handover is a critical process for ensuring quality and safety in healthcare. Considerable research suggests that poor handover results in significant morbidity, mortality, dissatisfaction, and excess financial costs. Despite this, little formal attention, education, and evaluation has been given to handover. There is also paucity of data on the opinions of practitioners on the safety of handover.Objectives: The aim of this study was to measure the perceived risk, degree of patient harm and the systems used to support handover, and to understand how this varied by care setting, type of clinical practice, location, or level of experience. Methods: An open, anonymous and confidential online questionnaire covering: (a) respondent characteristics; (b) peer-to-peer handover; (c) internal referrals; (d) discharges and transfers between organisations; and (e) leading and improving handover was conducted with healthcare practitioners and managers from various settings. Results: We gathered a total of 432 completed responses from 26 countries. The average reported performance of handover was rated as 3.9 out of 5.For each type of handover, 12 - 14% reported errors occurring more than weekly. Of those that knew the outcome of such errors, between 29% and 34% reported that they had witnessed moderate or severe harm. 12% and 17% of respondents believed that handover was high or very high risk (See table 4). These respondents were more likely to have witnessed moderate or severe harm, or to be more senior.A wide combination of handover systems was utilised by respondents. 28% - 32% relied exclusively on EPRs (with or without face-to-face contact). 21% used Office documents such as Word and Excel for peer-to-peer handover, and over 30% used hand-written or manual systems. Conclusions: This study suggests the need to do more — and go further — to improve communication and reduce risk during all types of handovers. Clinical leaders should find ways to train and support handover with effective systems, with less experienced staff being the primary focus. More research is needed to demonstrate the interventions that improve the safety of handover.

With the development of human-computer interaction, the importance of emotion recognition is increasing. Emotion recognition technology provides practical benefits in various industries such as improving user experience, education, and organizational productivity. In education, emotion recognition can enable real-time understanding of students' emotional states and provide tailored feedback, and in the workplace, by monitoring employees' emotional states, it can improve work performance and job satisfaction. Therefore, multimodal-based research that combines text, speech, and video data for emotion recognition is being conducted in various industries. In this study, we propose an emotion recognition method that combines text and speech data, reflecting the characteristics of the Korean language. For text, KoELECTRA is used to perform embedding, and for speech, MFCC and pitch analysis are used to extract features. Finally, a multimodal transformer model is proposed that combines these two data types to perform emotion recognition. The multimodal transformer model processes text and speech data separately, and then learns the interaction between the two modalities through a Cross-Modal Attention mechanism. Through this, the complementary information from text and speech is effectively combined, improving emotion recognition performance. Experimental results show that the proposed model outperforms single-modality models, achieving a high accuracy of 73.13% and an F1-Score of 0.7344 in emotion classification. This study contributes to the advancement of emotion recognition technology by combining various language and modality data, and higher performance can be expected through the integration of additional modalities in the future.

In this paper, a land utilization efficiency evaluation model, which takes environmental loss into consideration, has been structured via taking advantage of the slack-based measure (SBM) model. Meanwhile, based on the panel data from 280 prefecture-level cities in China from 2003 to 2013, the paper thoroughly probed into, and discussed, the effect imposed by industry clustering and specialization on the utilization efficiency of urban land. Research results indicate several conclusions, as follows: (1) Taking environmental loss into account, the land utilization efficiency of prefecture-level cities in China is generally low. During the research period, the average value of the land utilization efficiency of prefecture-level cities in China is only 0.349, with, first, a declining trend, and then a rise. Geographically speaking, the land utilization efficiency presents a “depression in the center” phenomenon which means the land utilization efficiency of prefecture-level cities in the central China are relatively lower than in the east and west. Now, the difference among the urban land utilization efficiency in China significantly reflects the distinctions among Eastern, Western, and Central China. Moreover, the contribution degree of the difference of the land utilization efficiency among cities of central China to the aggregation difference shows an ascending momentum. Additionally, the relation between the population scale and land utilization efficiency in cities manifests as a U shape; (2) theoretically speaking, the relation between industry clustering and urban land utilization efficiency presents an inverted-U shape. However, this kind of relation is not significant in Western and Central China and medium-sized cities. Moreover, most of cities are still relatively far away from the inflection point or the critical value; and (3) the industry professional level has imposed a positive influence on urban land utilization efficiency. However, that influence is not significant in Eastern China and large cities. Consequently, strengthening the industry professional development of Western and Central China and small and medium-sized cities, facilitating diversified development of industries in Eastern China and large cities, and accelerating industrial clustering, all of these measures above will be conducive to improving urban land utilization efficiency in China.

Interprofessional collaboration between general practitioners (GPs) and community pharmacists (CPs) is central to implement antimicrobial stewardship (AMS) programs in primary care. This study aimed to design a GP-pharmacist antimicrobial stewardship (GPPAS) model in Australian primary care. A seven-component exploratory study was conducted since 2017 to 2021 to inform a GPPAS model. We generated both secondary and primary evidence through a systematic review, a scoping review, a rapid review, nationwide surveys of Australian GPs and CPs including qualitative components and a pilot study of a GPPAS model. All study evidence was synthesised, reviewed, merged and triangulated to design a prototype GPPAS model using a Systems Engineering Initiative for Patient Safety theoretical framework. Secondary evidence informed effective GPPAS interventions, and primary evidence captured interprofessional issues, challenges and future needs to implement GPPAS interventions by GPs and CPs. A GPPAS model framework involving GP-pharmacist team-based five GPPAS sub-models were successfully designed to foster AMS education, antimicrobial audits, diagnostic stewardship, delayed prescribing, and routine review of antimicrobial prescription by improved GP-CP collaboration. A GPPAS model could be used as a guide to collaboratively optimise antimicrobial use by GPs and CPs. Implementation studies on GPPAS model and sub-models are required to integrate GPPAS model into GP-pharmacist interprofessional care models in Australia.

Jumping side volley has created breathtaking moments and cherished memories for us. Regrettably, a scientific study on the skill has not been found in literature. Relying on talent of athletes to improvise on the fly can hardly be considered a viable learning strategy. This study targets to fill the gap by quantifying factors contributing to develop its coaching method. Using 3D motion capture (12-cameras, 200Hz) and full-body biomechanical modeling, our study aimed to identify elements that govern entrainment of the skill by examining jumping, kicking and falling phases of its execution. Given the rarity of players who have acquired this skill, we found five subjects for the study. Twenty-three trials were captured and quantified. The results unveil the following key elements: 1) the control of trunk rotation during the jumping, 2) the angle between thighs upon take-off, 3) the whip-like control of the kicking leg during airborne, 4) timing between ball motion and limbs’ coordination, and 5) damping mechanism during falling. An accurate kick can only be achieved through repetitive training. This underlines the need for athletes to master a safe landing technique that minimizes risk of injury during practice. Therefore, training should begin with learning a safe falling technique.

This research article investigates the application of artificial intelligence (AI) in human resource management (HRM) within the Australian commercial media sector, addressing a critical gap in scholarly knowledge. Despite increasing interest in AI’s potential, there is a lack of consensus among managers and HR professionals regarding its application. Through qualitative interviews with 22 industry professionals, this study examines perceptions, understanding, and the potential for leveraging AI across key HRM functions. Findings indicate significant potential for AI to enhance HRM processes, particularly in job/work design and staffing. This research contributes to a deeper understanding of AI’s role in HRM and offers insights to optimize organizational efficiency and effectiveness in the Australian commercial media sector.

Background: Patients with chronic obstructive pulmonary disease (COPD) often suffer from acute exacerbations. Our objective was to describe recurrent exacerbations in a GP based Swiss COPD cohort, and develop a statistical model for predicting exacerbation. Methods: In a questionnaire-based COPD cohort, demographic and medical data were recorded for 24 months. Data set was split into training (75%) and validation (25%) datasets. A negative binomial regression model was developed using the training dataset to predict the exacerbation rate within 1 year. An exacerbation prediction model was developed, and the overall performance was validated. A nomogram was created to facilitate the clinical use of the model. Results: Of the 229 COPD patients analyzed, 77% of patients had no exacerbation during the follow-up. The best subset in the training dataset found that lower forced expiratory volume, high scores on the MRC dyspnoea scale, exacerbation history, being on combination therapy of LABA+ICS or LAMA+LABA at baseline were associated with a higher rate of exacerbation. When validated, the area-under-curve (AUC) was 0.75 for one or more exacerbations. Calibration was accurate (predicted 0.34 exacerbations vs observed 0.28 exacerbations). Conclusion: Nomograms built from these models can assist clinicians in the decision-making process of their COPD care.

The use of crime mapping has been used by the police to inform deployment of resources for many decades. Such approaches are commonly used to underpin crime control strategies designed to prevent or reduce acquisitive crimes such as domestic burglary. In recent decades there has been a shift away from simple hot spot identification to more complex geospatial mapping methodologies, such as near repeat analysis which was developed through research regarding burglary victimisation. One of these newly emerging methodologies is built upon the ecological, optimal forager theory (OFT). Research using this theory to examine domestic burglary offending intimated potential for positive results in predicting areas at risk of future crime. This led to a number of police services using crime analysis methodologies built upon OFT to underpin their deployment of resources in an effort to prevent or reduce domestic burglary through increased capable guardianship. However, to date, there has been no detailed examination of how the police services implemented such approaches. As such, this study seeks to fill this gap by examining OFT strategies implemented within 5 police services. By interviewing participants directly involved in the programs the study gathers views and perspectives of its relative success. As a result, we identify that participants felt the strategies produced limited impact on recorded burglary crime. We discuss how despite some positive by-products of the strategies, failure to comprehensively apply the theoretical foundations of OFT, and a variety of implementation failures have undermined the various programs, ultimately impacting their effectiveness.

This article explores how digitalisation is impacting the hospitality industry and assesses the evolving role of Information Technology (IT) strategy in the digitalisation process. The research approach is qualitative and inductive, based on six in-depth interviews with senior IT professionals in the hospitality industry. Findings indicate significant differences in the role of IT strategy in guiding digitalisation in the companies studied. The depth of information provided by the interviewees supports the development and application of a model that profiles the companies regarding their degree of digitalisation and technology integration. Analysis of interview material allows the identification of key properties for successful digitalization: process agility, workforce adaptability, and technology manageability, along with a clear data culture and ensured cybersecurity. However, disparate systems and technologies, and a lack of data integrity, are key issues that leave hospitality companies with difficult choices in progressing digitalisation initiatives. The applied model and identification of key properties for successful digitalisation contribute to the development of related theory and can also be used as a reference point for senior IT professionals working in the industry.

Purpose- This study seeks to investigate the collaboration between Digitalization and traditional manufacturing industry and investigate, how digitalized management brings new chances and challenges of management. Design/methodology/approach – The author designed a content analytical study researching the role of digitalization in traditional manufacturing industries. The article presents a selective but systematical review of recent digitalization trend and digital twin to be applied for innovative management in Industry 4.0 era. Findings– Digitalization is highly correlated with traditional manufactory in Industry 4.0 era. The study brings a new outlook on the next wave of Digitalization and review of associated challenges and opportunities for management and innovation in traditional manufacturing industries. Research limitations/implications – The research focuses on two branches of traditional industries only: machine tools building and metalworking industries. Future research needs to examine other traditional industries. The research is limited to 2 high related traditional manufacturing industries, machine tools and metalworking industry. Practical implications – The study and application of digitalization should be highly recommended and launched in traditional manufacturing industries. Universities, institutes and vocational schools should update, optimize their courses systems according to prediction of future industry. Originality/value – The paper enhances understanding about the collaboration between digitalization and traditional manufacturing industry. This paper analyzes an important issue the digitalization serves traditional industries. It is unique in its broad analysis of the related terms – Digitalization, Machines 4.0, Industry 4.0 and innovative management in Industry 4.0 era.

This study aimed to elucidate the perception gap regarding instructional matters between special education teachers and vocational rehabilitation practitioners involved in transition support in Japan. To this end, 126 vocational support providers affiliated with the Employment and Life Support Centers for persons with disabilities, which are vocational rehabilitation institutions in Japan, and 129 special education teachers from schools for students with intellectual disabilities in Prefecture X, Japan, were surveyed. They were asked to respond on the importance of teaching skills that constitute vocational readiness by means of a questionnaire comprising 25 items across five layers: vocational aptitude, basic work habits, interpersonal skills, daily living management, and health management, both during school and after graduation. The results revealed a perception gap in each of the first layer, vocational aptitude, and second layer, work habits. Additionally, only in the second layer, work habits, did special education teachers recognize the importance of instruction more during the school period than after graduation. Moving forward, it is necessary for both institutions involved in transition support to collaborate, focusing on students with disabilities based on the identified gap.

Inter-industry has various capital structures to take advantage of growth opportunities due to agency differences and information asymmetric problems. This research aims to analyze: (1) the differences in leverage between industries; (2) the impact of shareholders-debtholders conflict and information asymmetric on growth opportunities. The findings show that there are differences in leverage between industries. However, they are relatively stable and not excessive for assets to prevent conflicts between managers and shareholders and debtholders. Equity is also not used to utilize growth because it is used to reduce the discretionary power (dilution) of shareholders. As a result, the use of opportunities and growth is limited.

The assessment of soil contamination in the vicinity of integrated siderurgical plants is of outmost importance for agroecosystems and human health, and sensitive techniques should be employed for accurate assessment of chemical elements (metals, potential toxic elements, rare earths, radioelements) in soil and further evaluation of potential ecological and safety risk. In this paper a total of 45 major, minor and trace elements (Al, As, Au, Ba, Br, Ca, Cd, Ce, Co, Cr, Cs, Cu, Dy, Eu, Fe, Hf, Hg, I, K, La, Mg, Mn, Mo, Na, Nd, Ni, Pb, Rb, Sb, Sc, Sm, Sn, Sr, Ta, Tb, Th, Ti, Tm, U, V, W, Y, Yb, Zn and Zr) were quantified in soils located around a large siderurgical works (Galati, SE Romania) using instrumental neutron activation analysis (INAA) in combination with X-ray fluorescence (XRF) and inductively coupled plasma mass spectrometry (ICP-MS). The statistical analysis results and vertical distribution patterns for three depths (0-5 cm, 5-20 cm, 20-30 cm) indicate inputs of toxic elements in the sites close to the ironmaking and steelmaking facilities and industrial wastes dumping site. For selected elements, a comparison with historical, legislated and world reported concentration values in soil was performed and depth migration, contamination and toxic risk indices were assessed. The distribution of major, rock forming elements was closer to the Upper Continental Crust (UCC), and to the Dobrogea loess, finding confirmed by the ternary diagram of the incompatible trace elements Sc, La and Th, as well as by the La to Th rate. At the same time, the La/Th vs. Sc and Th/Sc vs. Zr/Sc bi-plots suggested a felsic origin and a weak recycling of soils mineral components.

Transportation systems through the ages have seen drastic evolutions in terms of transportation methods, speed of transport, infrastructure, technology, connectivity, influence on the environment, and accessibility. The massive transformation seen in the transportation sector has been fueled by the industrial revolutions which have continued expansion and progress into the fourth industrial revolution. However, the methodologies of data collection and processing used by the many drivers of this progress differ. The significance of standardized data and its mode of collection cannot be overstated as it has a major impact on the process outcomes. In order to achieve a better understanding of the impact of this, this study methodically reviewed the literature on the subject of the data collection and processing mechanism of 4IR technologies in the context of the transport industry with an emphasis on the areas of accomplishment of several studies and drawing attention to their limitations. Although the industry has advanced significantly as a result of the adoption and application of various research studies in this field, considerable focus needs to be placed in the areas of standardized data collection and computational approaches, which will ultimately assist in achieving various benefits in the transportation industry.

Ocean exploration is crucial for utilizing its extensive resources. Images captured by underwater robots suffer from issues such as color distortion and reduced contrast. To address the issue, we propose an innovative enhancement algorithm that integrates Transformer and Convolutional Neural Network (CNN) in a parallel fusion manner. Firstly, a novel transformer model is intro-duced to capture local features, employing peak-signal-to-noise ratio (PSNR) attention and linear operations. Subsequently, to extract global features, both temporal and frequency domain features are incorporated to construct convolutional neural network. Finally, the Fourier’s high and low-frequency information of the original image are utilized to fuse different features. To demon-strate the algorithm's effectiveness, underwater images with various levels of color distortion are selected for both qualitative and quantitative analyses. The experimental results demonstrate that our approach surpasses other mainstream methods, achieving superior PSNR and structural sim-ilarity index measure (SSIM) metrics and leading to a detection performance improvement of over ten percent.

This study explores the properties and behavior of bi-close-to-convex functions, introducing new subclasses defined by their relationship with fractional differential operator and bi-univalent functions. Using the Faber polynomial technique, we derive upper bounds for the n^{th} coefficient of functions in these classes. We also investigate the erratic behavior of initial coefficients in bi-close-to-convex functions, as characterized by the (λ,q)-fractional differintegral operator. Furthermore, we address Fekete-Szegö problems and present notable findings from our investigation, contributing to the continued growth and refinement of geometric function theory, yielding new insights and practical uses.

The required processes and steps for making bread include technological and innovative concepts. The current trend is the use of less toxic compounds and green processes. Besides lactic acid bacteria and yeast, other microorganisms with special properties, such as enzymes, new aroma and flavor, exopolysaccharides, and vitamins, among other compounds with beneficial properties, could be added to bread manufacture, improving bread quality and health effects for the consumers. Freeze drying, new encapsulation methods, cryoprotectants, spray drying, fluidized bed drying, and vacuum drying are used for probiotics and microorganism cultures that will be used as starters or biological additives in the fermentation. The same development is observed in the preservation methods, and studies with plant extracts and essential oils have been proposed and introduced, replacing chemical agents, such as propionate, within the clean-label bread formulations concept. Baking science is a growing research line incorporating innovative methods and biological additives.

Directed acyclic graphs (DAGs) are nonparametric causal path diagrams that have substantial utility as principled representations of disease and healthcare pathways, and of the underlying ‘data generating mechanisms’ these pathways involve. As such, DAGs provide a valuable bridge between: the aetiological knowledge, operational insight and professional experience on which clinical training and practice depend; and the more abstract epistemological and analytical considerations required to extract robust statistical insight from health and healthcare data. DAGs are nonetheless vulnerable to imperfect biomedical paradigms, partial clinical knowledge and limited empirical data. DAGs drawn under such circumstances offer limited scope for statistical insight free from cognitive, analytical or inferential bias if: they misrepresent the data generating mechanisms involved; or ignore the important role that omitted variables (whether measured, unmeasured or unacknowledged) might play therein. To address these weaknesses and broaden the appeal and application of DAGs, this chapter provides ten simple steps that educators can use to improve the analytical competence and statistical confidence of the healthcare students, qualified practitioners and experienced researchers they support. These steps use temporal logic to draw DAGs so as to: reduce reliance on uncertain knowledge, incomplete information, flawed assumptions or guesswork; and avoid, mitigate or acknowledge the errors and biases that each of these incur. The chapter comprises an accessible, non-technical overview of the perspective and thoughtfulness required to generate temporally coherent DAGs as objective representations of the probabilistic causal paths involved in context-specific data generating mechanisms. It encourages a focus on those variables operating as potential sources of analytical or inferential bias when estimating the plausible, probabilistic causal relationship between two pre-specified variables; and specifically addresses the challenges posed by: omitted; time-variant; non-asynchronous; and temporally obscure variables. The chapter includes a worked example based on a published clinical study to demonstrate how each of the steps required to generate temporally-informed DAGs can be applied to: critically appraise the analytical decisions made during applied healthcare research; and inform the decisions required when designing, undertaking and analysing primary and secondary, prospective and retrospective research. The appendices include a summary of ten recommendations for improving the reporting and interrogability of DAGs and DAG-informed analyses.

Economic development and advancements in information technology contributed to the shift on accounting objective from commission responsibility view to decision-making useful view. The decision-making useful view claims that the accounting measurement methods should be changed to improve the usefulness of accounting information, to enable information users to make correct decisions. In addition, the development of financial instruments leads to the birth of fair value accounting. In recent years, fair value has been one of the most important measurement methods in the International Accounting Standard and US Generally Accepted Accounting Principles. However, China has been quite cautious when it comes to applying fair value full time, especially after the global financial crisis happened in 2008, wherein fair value accounting was exposed to strong suspicion. Hence, studying the value relevance of fair value is of great significance to exploring the accounting profession and reforming accounting standards. This paper attempts to investigate the value-relevance of fair value based on the data of listed financial companies and manufacturing companies in China. The results indicate that the fair value information in the financial industry has a strong explanatory influence to corporate share price. In contrast, the fair value information shows limited relevance in the manufacturing industry. Finally, consulting with the results of normative analysis and empirical study, this paper suggests several rational advices for the application of fair value in China.

The construction industry is a resource and energy intensive industry and thus, has been criti-cized due to rising environmental concerns. As a result of that it has gained heightened interest in the concept of Circular Economy (CE) over the last decade to its ability to promote the slowing, reducing, and closing production and consumption cycles of materials and products used in the construction practices. Digital technologies hold potential to enhance the construction industry's ability to integrate the concept of CE in its practices. However, a clear understanding of digital technology (DT) related barriers that hinder practical implementation of CE, appears to be lacking within the sector. In light of this, this study aims to identify the barriers to adopting DTs to im-plement CE practices in the construction industry. To achieve this aim, a systematic literature review was conducted by reviewing twenty-three (23) relevant papers published until January 2024 in Scopus database. The VOS viewer software was used to perform a co-occurrence analysis of keywords to identify new and popular study areas in the field and content analysis was used to analyse the major barriers to adapt DTs to implement CE in the construction industry. The study identified thirty-four (34) barriers to use DTs to implement CE and these were categorized into nine areas such as: infrastructure, organizational, regulatory, standardization, investment, nature of the construction industry, technological, stakeholder and data related barriers. These findings will be beneficial for construction practitioners and policy makers to adopt DTs to integrate CE practices in the construction industry.

Smart cities are a new approach to facilitating urban development and transformation, driving coordinated development between regions, and achieving sustainable urban development. In the era of smart cities, industrial cloud platforms, as a concrete representation and carrier of “industrial brains”, are gradually becoming one of the core competences of urban manufacturing industries. Case study and qualitative comparative analysis (QCA) of a knitting industrial platform in Yiwu City, China are carried out. The following conclusion can be drawn: the construction mechanism and path of the manufacturing “industrial brain” in the smart city are divided into three stages according to the construction of the industrial platform. These include: functional development (FD), trust-building (TB), and value co-creation (VCC). The research conclusion helps to more deeply understand the effects of industrial platforms on constructing “industrial brains”. It provides effective transformation strategies and guidance for the manufacturing industry in the smart city, and pushes the industry to develop towards an intelligent, efficient, and environmental-friendly one. The research provides useful reference for applying the industrial platform to other industries and fields. Exploring the construction mechanism and path of the manufacturing “industrial brain” in the smart city can also contribute to the establishment of a new industrial ecosystem in the era of smart cities.

As the cost of conventional energy continues to rise, and concerns over the environment grow, there is a growing interest in sustainable energy. It is believed that conventional energy will only last for around 50 years, making it essential to find a renewable energy source that is safe and feasible to replace fossil fuels. Solar energy is a superior alternative to conventional energy, as it is renewable and produces green energy that can be used directly. The maritime industry has found itself at the forefront of an evolving environmental consciousness, driven by the imperative to mitigate the carbon footprint left in the wake of ships. In this journey towards sustainability, solar energy has emerged as a beacon of hope, harnessing the boundless energy of the sun to wean vessels off their dependence on fossil fuels. Technological advancements have made solar power more accessible, and we can now see the use of solar panels on large ships and small crafts to reduce fuel usage and emissions. Solar panels are also increasingly used to power homes and businesses, and many countries are implementing policies to encourage their use. Solar energy is a key solution in reducing our dependence on non-renewable energy sources and combating climate change. However, the adoption of solar energy is but a stepping stone towards maritime sustainability, as the integration of CO2 capture, utilization, and storage (CCUS) technologies promises to amplify the industry's environmental impact to unprecedented heights.

Industry 4.0 or the Fourth Industrial Revolution is driven by innovative technologies that have profound effects on both production systems and business models. This revolution is characterized by the addition of disruptive technologies and methods. These aspects of Industry 4.0 have a significant impact on marketing and have led to an evolution to ensure that marketing activities align with technological advancements and address consumers' current needs. The purpose of this paper is to formulate and discuss future research avenues for marketing considering the changes brought by Industry 4.0. The approach taken in the paper is to review the relevant literature and focus on the key themes most important for future research on industry 4.0 and marketing. Therefore, a systematic literature review was conducted based on SCOPUS indexing online database of scientific articles, the most important peer-reviewed peer in the academic world. The paper finds that there are a number of research avenues for marketing researchers to conduct investigations on, but the most important areas are five marketing principles in Industry 4.0: cooperation, conversation, co-creation, cognitivity, and connectivity.

The data-oriented paradigm has proven to be fundamental for the technological transformation process that characterizes Industry 4.0 (I4.0) so that Big Data & Analytics is considered a technological pillar of this process. The literature reports a series of system architecture proposals that seek to implement the so-called Smart Factory, which is primarily data-driven. Many of these proposals treat data storage solutions as mere entities that support the architecture's functionalities. However, choosing which logical data model to use can significantly affect the performance of the architecture. This work identifies the advantages and disadvantages of relational (SQL) and non-relational (NoSQL) data models for I4.0, taking into account the nature of the data in this process. The characterization of data in the context of I4.0 is based on the five dimensions of Big Data and a standardized format for representing information of assets in the virtual world, the Asset Administration Shell. This work allows identifying appropriate transactional properties and logical data models according to the volume, variety, velocity, veracity, and value of the data. In this way, it is possible to describe the suitability of SQL and NoSQL databases for different scenarios within I4.0.

The new NICE guideline for myalgic encephalomyelitis/chronic fatigue syndrome (ME/CFS), published in October 2021, makes significant changes in treatment recommendations. It acknowledges the complexity of this chronic medical condition, which always impacts quality of life and can be profoundly disabling, recognising the prejudice and stigma that people with ME/CFS often experience in the absence of any specific diagnostic test. The guideline outlines steps for accurate diagnosis, recognising post-exertional malaise as a core symptom; importantly, ME/CFS can now be diagnosed after just 3 months in a bid to improve long-term health outcomes. It recommends the need for individual, tailored management by a multi-disciplinary team, ensuring that the wellbeing of the individual is paramount. The guideline makes clear that any programme based on fixed incremental increases in physical activity or exercise, for example graded exercise therapy (GET), should not be offered as a treatment for ME/CFS and emphasises that cognitive behavioural therapy (CBT) should only be offered as a supportive intervention. Because of the rigorous methodology required by NICE Committee review and the inclusion of the testimony of people with lived experience as committee members, this guideline will influence the future diagnosis and management of ME/CFS in the UK and beyond.

Background and Objectives: Knee osteoarthritis (KOA) is a degenerative disease that is targeting continuously people of different ages, but especially the elderly population, the number of which tends to increase continuously at the global level. Apart from age, excess weight can influence the evolution of the disease, with obesity being associated with a weak inflammation stage, and an imbalance between pro-inflammatory and anti-inflammatory cytokines. The present work aimed to identify specific biomarkers alike ACRP-30, IL-10, TNF-α, and IL-6 in synovial fluid and correlate them with patients’ clinical data. Materials and Methods: 24 subjects with KOA and over 50 years of age are involved in the present study. All patients performed a supine X-ray at the target knee. Ultrasound was performed using an ESAOTE MyLab Omega (ESAOTE Spa, Italy) ultrasound device and a 6-19 MHz linear array transducer. Results: The obtained results highlighted a significant correlation between age and adiponectin level (p=0.0451, r=-0.412). Also, the IL-10 values are lower in cases where the intensity of the pain is more pronounced (p=0.0405, r=-0.421). In addition, analyzing the data by gender, it was observed that in the case of males, stiffness is more related to age (p=0.0079, r=0.7993), compared to women (p=0.0203, r=0.6223). In the case of women, the progression of the disease tends to increase more intensively total WOMAC score’s values (p=0.00031, r=0.8342), compared with men (p=0.0289, r=7013). Regarding interleukins and BMI, significant correlations were observed only in the case of men. Conclusions: A significant correlation between age and adiponectin, and adiponectin and IL-6, suggests that advanced age may contribute to adiponectin reduction. Comparing men with women, it was observed that men's age is more related to rigidity, and IL-6 and IL-10 are directly correlated to BMI and women seem to be more sensitive to pain and stiffness.