In this research, new setting is introduced for new SuperHyperNotions, namely, an SuperHyperStable and Neutrosophic SuperHyperStable. Two different types of SuperHyperDefinitions are debut for them but the research goes further and the SuperHyperNotion, SuperHyperUniform, and SuperHyperClass based on that are well-defined and well-reviewed. The literature review is implemented in the whole of this research. For shining the elegancy and the significancy of this research, the comparison between this SuperHyperNotion with other SuperHyperNotions and fundamental SuperHyperNumbers are featured. The definitions are followed by the examples and the instances thus the clarifications are driven with different tools. The applications are figured out to make sense about the theoretical aspect of this ongoing research. The ``Cancer's Recognitions'' are the under research to figure out the challenges make sense about ongoing and upcoming research. The special case is up. The cells are viewed in the deemed ways. There are different types of them. Some of them are individuals and some of them are well-modeled by the group of cells. These types are all officially called ``SuperHyperVertex'' but the relations amid them all officially called ``SuperHyperEdge''. The frameworks ``SuperHyperGraph'' and ``neutrosophic SuperHyperGraph'' are chosen and elected to research about ``Cancer's Recognitions''. Thus these complex and dense SuperHyperModels open up some avenues to research on theoretical segments and ``Cancer's Recognitions''. Some avenues are posed to pursue this research. It's also officially collected in the form of some questions and some problems. Assume a SuperHyperGraph. Then a``SuperHyperStable'' $\mathcal{I}(NSHG)$ for a SuperHyperGraph $NSHG:(V,E)$ is the maximum cardinality of a SuperHyperSet $S$ of SuperHyperVertices such that there's no SuperHyperVertex to have a SuperHyperEdge in common. Assume a SuperHyperGraph. Then an ``$\delta-$SuperHyperStable'' is a \underline{maximal} SuperHyperStable of SuperHyperVertices with \underline{maximum} cardinality such that either of the following expressions hold for the (neutrosophic) cardinalities of SuperHyperNeighbors of $s\in S:$ $~|S\cap N(s)| > |S\cap (V\setminus N(s))|+\delta,~|S\cap N(s)| < |S\cap (V\setminus N(s))|+\delta.$ The first Expression, holds if $S$ is an ``$\delta-$SuperHyperOffensive''. And the second Expression, holds if $S$ is an ``$\delta-$SuperHyperDefensive''; a``neutrosophic $\delta-$SuperHyperStable'' is a \underline{maximal} neutrosophic SuperHyperStable of SuperHyperVertices with \underline{maximum} neutrosophic cardinality such that either of the following expressions hold for the neutrosophic cardinalities of SuperHyperNeighbors of $s\in S:$ $~|S\cap N(s)|_{neutrosophic} > |S\cap (V\setminus N(s))|_{neutrosophic}+\delta,~ |S\cap N(s)|_{neutrosophic} < |S\cap (V\setminus N(s))|_{neutrosophic}+\delta.$ The first Expression, holds if $S$ is a ``neutrosophic $\delta-$SuperHyperOffensive''. And the second Expression, holds if $S$ is a ``neutrosophic $\delta-$SuperHyperDefensive''. It's useful to define a ``neutrosophic'' version of an SuperHyperStable. Since there's more ways to get type-results to make an SuperHyperStable more understandable. For the sake of having neutrosophic SuperHyperStable, there's a need to ``redefine'' the notion of an ``SuperHyperStable''. The SuperHyperVertices and the SuperHyperEdges are assigned by the labels from the letters of the alphabets. In this procedure, there's the usage of the position of labels to assign to the values. Assume an SuperHyperStable. It's redefined a neutrosophic SuperHyperStable if the mentioned Table holds, concerning, ``The Values of Vertices, SuperVertices, Edges, HyperEdges, and SuperHyperEdges Belong to The Neutrosophic SuperHyperGraph'' with the key points, ``The Values of The Vertices \& The Number of Position in Alphabet'', ``The Values of The SuperVertices\&The maximum Values of Its Vertices'', ``The Values of The Edges\&The maximum Values of Its Vertices'', ``The Values of The HyperEdges\&The maximum Values of Its Vertices'', ``The Values of The SuperHyperEdges\&The maximum Values of Its Endpoints''. To get structural examples and instances, I'm going to introduce the next SuperHyperClass of SuperHyperGraph based on an SuperHyperStable. It's the main. It'll be disciplinary to have the foundation of previous definition in the kind of SuperHyperClass. If there's a need to have all SuperHyperConnectivities until the SuperHyperStable, then it's officially called an ``SuperHyperStable'' but otherwise, it isn't an SuperHyperStable. There are some instances about the clarifications for the main definition titled an ``SuperHyperStable''. These two examples get more scrutiny and discernment since there are characterized in the disciplinary ways of the SuperHyperClass based on an SuperHyperStable. For the sake of having a neutrosophic SuperHyperStable, there's a need to ``redefine'' the notion of a ``neutrosophic SuperHyperStable'' and a ``neutrosophic SuperHyperStable''. The SuperHyperVertices and the SuperHyperEdges are assigned by the labels from the letters of the alphabets. In this procedure, there's the usage of the position of labels to assign to the values. Assume a neutrosophic SuperHyperGraph. It's redefined ``neutrosophic SuperHyperGraph'' if the intended Table holds. And an SuperHyperStable are redefined to an ``neutrosophic SuperHyperStable'' if the intended Table holds. It's useful to define ``neutrosophic'' version of SuperHyperClasses. Since there's more ways to get neutrosophic type-results to make a neutrosophic SuperHyperStable more understandable. Assume a neutrosophic SuperHyperGraph. There are some neutrosophic SuperHyperClasses if the intended Table holds. Thus SuperHyperPath, SuperHyperCycle, SuperHyperStar, SuperHyperBipartite, SuperHyperMultiPartite, and SuperHyperWheel, are ``neutrosophic SuperHyperPath'', ``neutrosophic SuperHyperCycle'', ``neutrosophic SuperHyperStar'', ``neutrosophic SuperHyperBipartite'', ``neutrosophic SuperHyperMultiPartite'', and ``neutrosophic SuperHyperWheel'' if the intended Table holds. A SuperHyperGraph has a ``neutrosophic SuperHyperStable'' where it's the strongest [the maximum neutrosophic value from all the SuperHyperStable amid the maximum value amid all SuperHyperVertices from an SuperHyperStable.] SuperHyperStable. A graph is a SuperHyperUniform if it's a SuperHyperGraph and the number of elements of SuperHyperEdges are the same. Assume a neutrosophic SuperHyperGraph. There are some SuperHyperClasses as follows. It's SuperHyperPath if it's only one SuperVertex as intersection amid two given SuperHyperEdges with two exceptions; it's SuperHyperCycle if it's only one SuperVertex as intersection amid two given SuperHyperEdges; it's SuperHyperStar it's only one SuperVertex as intersection amid all SuperHyperEdges; it's SuperHyperBipartite it's only one SuperVertex as intersection amid two given SuperHyperEdges and these SuperVertices, forming two separate sets, has no SuperHyperEdge in common; it's SuperHyperMultiPartite it's only one SuperVertex as intersection amid two given SuperHyperEdges and these SuperVertices, forming multi separate sets, has no SuperHyperEdge in common; it's a SuperHyperWheel if it's only one SuperVertex as intersection amid two given SuperHyperEdges and one SuperVertex has one SuperHyperEdge with any common SuperVertex. The SuperHyperModel proposes the specific designs and the specific architectures. The SuperHyperModel is officially called ``SuperHyperGraph'' and ``Neutrosophic SuperHyperGraph''. In this SuperHyperModel, The ``specific'' cells and ``specific group'' of cells are SuperHyperModeled as ``SuperHyperVertices'' and the common and intended properties between ``specific'' cells and ``specific group'' of cells are SuperHyperModeled as ``SuperHyperEdges''. Sometimes, it's useful to have some degrees of determinacy, indeterminacy, and neutrality to have more precise SuperHyperModel which in this case the SuperHyperModel is called ``neutrosophic''. In the future research, the foundation will be based on the ``Cancer's Recognitions'' and the results and the definitions will be introduced in redeemed ways. The recognition of the cancer in the long-term function. The specific region has been assigned by the model [it's called SuperHyperGraph] and the long cycle of the move from the cancer is identified by this research. Sometimes the move of the cancer hasn't be easily identified since there are some determinacy, indeterminacy and neutrality about the moves and the effects of the cancer on that region; this event leads us to choose another model [it's said to be neutrosophic SuperHyperGraph] to have convenient perception on what's happened and what's done. There are some specific models, which are well-known and they've got the names, and some SuperHyperGeneral SuperHyperModels. The moves and the traces of the cancer on the complex tracks and between complicated groups of cells could be fantasized by a neutrosophic SuperHyperPath(-/SuperHyperCycle, SuperHyperStar, SuperHyperBipartite, SuperHyperMultipartite, SuperHyperWheel). The aim is to find either the longest SuperHyperStable or the strongest SuperHyperStable in those neutrosophic SuperHyperModels. For the longest SuperHyperStable, called SuperHyperStable, and the strongest SuperHyperCycle, called neutrosophic SuperHyperStable, some general results are introduced. Beyond that in SuperHyperStar, all possible SuperHyperPaths have only two SuperHyperEdges but it's not enough since it's essential to have at least three SuperHyperEdges to form any style of a SuperHyperCycle. There isn't any formation of any SuperHyperCycle but literarily, it's the deformation of any SuperHyperCycle. It, literarily, deforms and it doesn't form. A basic familiarity with SuperHyperGraph theory and neutrosophic SuperHyperGraph theory are proposed.

In this research, Assume a neutrosophic SuperHyperGraph. Then a ``Failed SuperHyperStable $\mathcal{I}(NSHG)$ for a SuperHyperGraph $NSHG:(V,E)$ is the maximum cardinality of a SuperHyperSet $S$ of SuperHyperVertices such that there's a SuperHyperVertex to have a SuperHyperEdge in common; a ``neutrosophic Failed SuperHyperStable'' $\mathcal{I}_n(NSHG)$ for a neutrosophic SuperHyperGraph $NSHG:(V,E)$ is the maximum neutrosophic cardinality of a neutrosophic SuperHyperSet $S$ of neutrosophic SuperHyperVertices such that there's a neutrosophic SuperHyperVertex to have a neutrosophic SuperHyperEdge in common. Assume a SuperHyperGraph. Then an ``$\delta-$Failed SuperHyperStable'' is a \underline{maximal} Failed SuperHyperStable of SuperHyperVertices with \underline{maximum} cardinality such that either of the following expressions hold for the (neutrosophic) cardinalities of SuperHyperNeighbors of $s\in S:$ $~|S\cap N(s)| > |S\cap (V\setminus N(s))|+\delta,~|S\cap N(s)| < |S\cap (V\setminus N(s))|+\delta.$ The first Expression, holds if $S$ is an ``$\delta-$SuperHyperOffensive''. And the second Expression, holds if $S$ is an ``$\delta-$SuperHyperDefensive''; a``neutrosophic $\delta-$Failed SuperHyperStable'' is a \underline{maximal} neutrosophic Failed SuperHyperStable of SuperHyperVertices with \underline{maximum} neutrosophic cardinality such that either of the following expressions hold for the neutrosophic cardinalities of SuperHyperNeighbors of $s\in S:$ $~|S\cap N(s)|_{neutrosophic} > |S\cap (V\setminus N(s))|_{neutrosophic}+\delta,~ |S\cap N(s)|_{neutrosophic} < |S\cap (V\setminus N(s))|_{neutrosophic}+\delta.$ The first Expression, holds if $S$ is a ``neutrosophic $\delta-$SuperHyperOffensive''. And the second Expression, holds if $S$ is a ``neutrosophic $\delta-$SuperHyperDefensive''. A basic familiarity with Extreme Failed SuperHyperClique theory, Neutrosophic Failed SuperHyperClique theory, and (Neutrosophic) SuperHyperGraphs theory are proposed.

in this research, new setting is introduced for new SuperHyperNotion, namely, Neutrosophic SuperHyperStable. In this research article, there are some research segments for ``Neutrosophic SuperHyperStable'' about some researches on neutrosophic SuperHyperStable. With researches on the basic properties, the research article starts to make neutrosophic SuperHyperStable theory more understandable. Assume a neutrosophic SuperHyperGraph. Then a ``neutrosophic SuperHyperStable'' $\mathcal{I}_n(NSHG)$ for a neutrosophic SuperHyperGraph $NSHG:(V,E)$ is the maximum neutrosophic cardinality of a neutrosophic SuperHyperSet $S$ of neutrosophic SuperHyperVertices such that there's no neutrosophic SuperHyperVertex to have a neutrosophic SuperHyperEdge in common. A basic familiarity with SuperHyperGraph theory and neutrosophic SuperHyperGraph theory are proposed.

In this research, the neutrosophic SuperHyperNotion, namely, neutrosophic SuperHyperGirth, is up. $E_1$ and $E_3$ are some empty neutrosophic SuperHyperEdges but $E_2$ is a loop neutrosophic SuperHyperEdge and $E_4$ is an neutrosophic SuperHyperEdge. Thus in the terms of neutrosophic SuperHyperNeighbor, there's only one neutrosophic SuperHyperEdge, namely, $E_4.$ The neutrosophic SuperHyperVertex, $V_3$ is neutrosophic isolated means that there's no neutrosophic SuperHyperEdge has it as an neutrosophic endpoint. Thus the neutrosophic SuperHyperVertex, $V_3,$ is excluded in every given neutrosophic SuperHyperGirth. $ \mathcal{C}(NSHG)=\{E_i\}~\text{is an neutrosophic SuperHyperGirth.} \ \ \mathcal{C}(NSHG)=jz^i~\text{is an neutrosophic SuperHyperGirth SuperHyperPolynomial.} \ \ \mathcal{C}(NSHG)=\{V_i\}~\text{is an neutrosophic R-SuperHyperGirth.} \ \ \mathcal{C}(NSHG)=jz^I~{\small\text{is an neutrosophic R-SuperHyperGirth SuperHyperPolynomial.}} $ The following neutrosophic SuperHyperSet of neutrosophic SuperHyperEdges[SuperHyperVertices] is the neutrosophic type-SuperHyperSet of the neutrosophic SuperHyperGirth. The neutrosophic SuperHyperSet of neutrosophic SuperHyperEdges[SuperHyperVertices], is the neutrosophic type-SuperHyperSet of the neutrosophic SuperHyperGirth. The neutrosophic SuperHyperSet of the neutrosophic SuperHyperEdges[SuperHyperVertices], is an neutrosophic SuperHyperGirth $\mathcal{C}(ESHG)$ for an neutrosophic SuperHyperGraph $ESHG:(V,E)$ is an neutrosophic type-SuperHyperSet with the maximum neutrosophic cardinality of an neutrosophic SuperHyperSet $S$ of neutrosophic SuperHyperEdges[SuperHyperVertices] such that there's only one neutrosophic consecutive sequence of the neutrosophic SuperHyperVertices and the neutrosophic SuperHyperEdges form only one neutrosophic SuperHyperCycle. There are not only four neutrosophic SuperHyperVertices inside the intended neutrosophic SuperHyperSet. Thus the non-obvious neutrosophic SuperHyperGirth isn't up. The obvious simple neutrosophic type-SuperHyperSet called the neutrosophic SuperHyperGirth is an neutrosophic SuperHyperSet includes only less than four neutrosophic SuperHyperVertices. But the neutrosophic SuperHyperSet of the neutrosophic SuperHyperEdges[SuperHyperVertices], doesn't have less than four SuperHyperVertices inside the intended neutrosophic SuperHyperSet. Thus the non-obvious simple neutrosophic type-SuperHyperSet of the neutrosophic SuperHyperGirth isn't up. To sum them up, the neutrosophic SuperHyperSet of the neutrosophic SuperHyperEdges[SuperHyperVertices], isn't the non-obvious simple neutrosophic type-SuperHyperSet of the neutrosophic SuperHyperGirth. Since the neutrosophic SuperHyperSet of the neutrosophic SuperHyperEdges[SuperHyperVertices], is an neutrosophic SuperHyperGirth $\mathcal{C}(ESHG)$ for an neutrosophic SuperHyperGraph $ESHG:(V,E)$ is the neutrosophic SuperHyperSet $S$ of neutrosophic SuperHyperVertices[SuperHyperEdges] such that there's only one neutrosophic consecutive neutrosophic sequence of neutrosophic SuperHyperVertices and neutrosophic SuperHyperEdges form only one neutrosophic SuperHyperCycle given by that neutrosophic type-SuperHyperSet called the neutrosophic SuperHyperGirth and it's an neutrosophic SuperHyperGirth . Since it 's the maximum neutrosophic cardinality of an neutrosophic SuperHyperSet $S$ of neutrosophic SuperHyperEdges[SuperHyperVertices] such that there's only one neutrosophic consecutive neutrosophic sequence of neutrosophic SuperHyperVertices and neutrosophic SuperHyperEdges form only one neutrosophic SuperHyperCycle. There are only less than four neutrosophic SuperHyperVertices inside the intended neutrosophic SuperHyperSet, thus the obvious neutrosophic SuperHyperGirth, is up. The obvious simple neutrosophic type-SuperHyperSet of the neutrosophic SuperHyperGirth, is: ,is the neutrosophic SuperHyperSet, is: does includes only less than four SuperHyperVertices in a connected neutrosophic SuperHyperGraph $ESHG:(V,E).$ It's interesting to mention that the only simple neutrosophic type-SuperHyperSet called the neutrosophic SuperHyperGirth amid those obvious[non-obvious] simple neutrosophic type-SuperHyperSets called the neutrosophic SuperHyperGirth , is only and only. A basic familiarity with neutrosophic SuperHyperGirth theory, SuperHyperGraphs, and neutrosophic SuperHyperGraphs theory are proposed.

In this research, assume a SuperHyperGraph. Then a neutrosophic SuperHyperMatching $\mathcal{C}(NSHG)$ for a neutrosophic SuperHyperGraph $NSHG:(V,E)$ is the maximum neutrosophic cardinality of a neutrosophic SuperHyperSet $S$ of high neutrosophic cardinality neutrosophic SuperHyperEdges such that there's no neutrosophic SuperHyperVertex not to in a neutrosophic SuperHyperEdge and there's no neutrosophic SuperHyperEdge to have a neutrosophic SuperHyperVertex in a neutrosophic SuperHyperEdge; a neutrosophic SuperHyperMatching SuperHyperPolynomial $\mathcal{C}(NSHG)$ for a neutrosophic SuperHyperGraph $NSHG:(V,E)$ is the neutrosophic SuperHyperPolynomial contains the neutrosophic coefficients defined as the neutrosophic number of the maximum neutrosophic cardinality of a neutrosophic SuperHyperSet $S$ of high neutrosophic cardinality neutrosophic SuperHyperEdges such that there's no neutrosophic SuperHyperVertex not to in a neutrosophic SuperHyperEdge and there's no neutrosophic SuperHyperEdge to have a neutrosophic SuperHyperVertex in a neutrosophic SuperHyperEdge and the neutrosophic power is neutrosophicly corresponded to its neutrosophic coefficient; a neutrosophic R-SuperHyperMatching $\mathcal{C}(NSHG)$ for a neutrosophic SuperHyperGraph $NSHG:(V,E)$ is the maximum neutrosophic cardinality of a neutrosophic SuperHyperSet $S$ of high neutrosophic cardinality neutrosophic SuperHyperVertices such that there's no neutrosophic SuperHyperVertex not to in a neutrosophic SuperHyperEdge and there's no neutrosophic SuperHyperEdge to have a neutrosophic SuperHyperVertex in a neutrosophic SuperHyperEdge; a neutrosophic R-SuperHyperMatching SuperHyperPolynomial $\mathcal{C}(NSHG)$ for a neutrosophic SuperHyperGraph $NSHG:(V,E)$ is the neutrosophic SuperHyperPolynomial contains the neutrosophic coefficients defined as the neutrosophic number of the maximum neutrosophic cardinality of a neutrosophic SuperHyperSet $S$ of high neutrosophic cardinality neutrosophic SuperHyperVertices such that there's no neutrosophic SuperHyperVertex not to in a neutrosophic SuperHyperEdge and there's no neutrosophic SuperHyperEdge to have a neutrosophic SuperHyperVertex in a neutrosophic SuperHyperEdge and the neutrosophic power is neutrosophicly corresponded to its neutrosophic coefficient. It's useful to define a ``neutrosophic'' version of a SuperHyperMatching . Since there's more ways to get type-results to make a SuperHyperMatching more understandable. For the sake of having neutrosophic SuperHyperMatching, there's a need to ``redefine'' the notion of a ``SuperHyperMatching ''. A basic familiarity with neutrosophic SuperHyperMatching theory, SuperHyperGraphs theory, and neutrosophic SuperHyperGraphs theory are proposed.

In this research, new setting is introduced for new SuperHyperNotions, namely, SuperHyperAlliances and Neutrosophic SuperHyperAlliances. Two different types of SuperHyperDefinitions are debut for them but the research goes further and the SuperHyperNotion, SuperHyperUniform, and SuperHyperClass based on that are well-defined and well-reviewed. The literature review is implemented in the whole of this research. For shining the elegancy and the significancy of this research, the comparison between this SuperHyperNotion with other SuperHyperNotions and fundamental SuperHyperNumbers are featured. The definitions are followed by the examples and the instances thus the clarifications are driven with different tools. The applications are figured out to make sense about the theoretical aspect of this ongoing research. The “Cancer’s Recognitions” are the under research to figure out the challenges make sense about ongoing and upcoming research. The special case is up. The cells are viewed in the deemed ways. There are different types of them. Some of them are individuals and some of them are well-modeled by the group of cells. These types are all officially called “SuperHyperVertex” but the relations amid them all officially called “SuperHyperEdge”. The frameworks “SuperHyperGraph” and “neutrosophic SuperHyperGraph” are chosen and elected to research about “Cancer’s Recognitions”. Thus these complex and dense SuperHyperModels open up some avenues to research on theoretical segments and “Cancer’s Recognitions”. Some avenues are posed to pursue this research. It’s also officially collected in the form of some questions and some problems. Assume a SuperHyperGraph. An “SuperHyperAlliance” is a minimal SuperHyperSet of SuperHyperVertices with minimum cardinality such that either of the following expressions hold for the cardinalities of SuperHyperNeighbors of s∈S:,|S∩N(s)|>|S∩(V \N(s))|,and|S∩N(s)|<|S∩(V \N(s))|.Thefirst Expression, holds if S is SuperHyperOffensive. And the second Expression, holds if S is “SuperHyperDefensive”. It’s useful to define “neutrosophic” version of SuperHyperAlliances. Since there’s more ways to get type-results to make SuperHyperAlliances more understandable. For the sake of having neutrosophic SuperHyperAlliances, there’s a need to “redefine” the notion of “SuperHyperAlliances”. The SuperHyperVertices and the SuperHyperEdges are assigned by the labels from the letters of the alphabets. In this procedure, there’s the usage of the position of labels to assign to the values. Assume a SuperHyperAlliance. It’s redefined neutrosophic SuperHyperAlliance if the mentioned Table holds, concerning, “The Values of Vertices, SuperVertices, Edges, HyperEdges, and SuperHyperEdges Belong to The Neutrosophic SuperHyperGraph” with the key points, “The Values of The Vertices & The Number of Position in Alphabet”, “The Values of The SuperVertices&The Minimum Values of Its Vertices”, “The Values of The Edges&The Minimum Values of Its Vertices”, “The Values of The HyperEdges&The Minimum Values of Its Vertices”, “The Values of The SuperHyperEdges&The Minimum Values of Its Endpoints”. To get structural examples and instances, I’m going to introduce the next SuperHyperClass of SuperHyperGraph based on SuperHyperAlliances. It’s the main. It’ll be disciplinary to have the foundation of previous definition in the kind of SuperHyperClass. If there’s a need to have all SuperHyperConnectivities until the SuperHyperAlliances, then it’s officially called “SuperHyperAlliances” but otherwise, it isn’t SuperHyperAlliances. There are some instances about the clarifications for the main definition titled “SuperHyperAlliances”. These two examples get more scrutiny and discernment since there are characterized in the disciplinary ways of the SuperHyperClass based on SuperHyperAlliances. For the sake of having neutrosophic SuperHyperAlliances, there’s a need to “redefine” the notion of “neutrosophic SuperHyperAlliances” and “neutrosophic SuperHyperAlliances”. The SuperHyperVertices and the SuperHyperEdges are assigned by the labels from the letters of the alphabets. In this procedure, there’s the usage of the position of labels to assign to the values. Assume a neutrosophic SuperHyperGraph. It’s redefined “neutrosophic SuperHyperGraph” if the intended Table holds. And SuperHyperAlliances are redefined “neutrosophic SuperHyperAlliances” if the intended Table holds. It’s useful to define “neutrosophic” version of SuperHyperClasses. Since there’s more ways to get neutrosophic type-results to make neutrosophic SuperHyperAlliances more understandable. Assume a neutrosophic SuperHyperGraph. There are some neutrosophic SuperHyperClasses if the intended Table holds. Thus SuperHyperPath, SuperHyperCycle, SuperHyperStar, SuperHyperBipartite, SuperHyperMultiPartite, and SuperHyperWheel, are “neutrosophic SuperHyperPath”, “neutrosophic SuperHyperCycle”, “neutrosophic SuperHyperStar”, “neutrosophic SuperHyperBipartite”, “neutrosophic SuperHyperMultiPartite”, and “neutrosophic SuperHyperWheel” if the intended Table holds. A SuperHyperGraph has “neutrosophic SuperHyperAlliances” where it’s the strongest [the maximum neutrosophic value from all SuperHyperAlliances amid the maximum value amid all SuperHyperVertices from a SuperHyperAlliances.] SuperHyperAlliances. A graph is SuperHyperUniform if it’s SuperHyperGraph and the number of elements of SuperHyperEdges are the same. Assume a neutrosophic SuperHyperGraph. There are some SuperHyperClasses as follows. It’s SuperHyperPath if it’s only one SuperVertex as intersection amid two given SuperHyperEdges with two exceptions; it’s SuperHyperCycle if it’s only one SuperVertex as intersection amid two given SuperHyperEdges; it’s SuperHyperStar it’s only one SuperVertex as intersection amid all SuperHyperEdges; it’s SuperHyperBipartite it’s only one SuperVertex as intersection amid two given SuperHyperEdges and these SuperVertices, forming two separate sets, has no SuperHyperEdge in common; it’s SuperHyperMultiPartite it’s only one SuperVertex as intersection amid two given SuperHyperEdges and these SuperVertices, forming multi separate sets, has no SuperHyperEdge in common; it’s SuperHyperWheel if it’s only one SuperVertex as intersection amid two given SuperHyperEdges and one SuperVertex has one SuperHyperEdge with any common SuperVertex. The SuperHyperModel proposes the specific designs and the specific architectures. The SuperHyperModel is officially called “SuperHyperGraph” and “Neutrosophic SuperHyperGraph”. In this SuperHyperModel, The “specific” cells and “specific group” of cells are SuperHyperModeled as “SuperHyperVertices” and the common and intended properties between “specific” cells and “specific group” of cells are SuperHyperModeled as “SuperHyperEdges”. Sometimes, it’s useful to have some degrees of determinacy, indeterminacy, and neutrality to have more precise SuperHyperModel which in this case the SuperHyperModel is called “neutrosophic”. In the future research, the foundation will be based on the “Cancer’s Recognitions” and the results and the definitions will be introduced in redeemed ways. The recognition of the cancer in the long-term function. The specific region has been assigned by the model [it’s called SuperHyperGraph] and the long cycle of the move from the cancer is identified by this research. Sometimes the move of the cancer hasn’t be easily identified since there are some determinacy, indeterminacy and neutrality about the moves and the effects of the cancer on that region; this event leads us to choose another model [it’s said to be neutrosophic SuperHyperGraph] to have convenient perception on what’s happened and what’s done. There are some specific models, which are well-known and they’ve got the names, and some SuperHyperGeneral SuperHyperModels. The moves and the traces of the cancer on the complex tracks and between complicated groups of cells could be fantasized by a neutrosophic SuperHyperPath(-/SuperHyperCycle, SuperHyperStar, SuperHyperBipartite, SuperHyperMultipartite, SuperHyperWheel). The aim is to find either the longest SuperHyperAlliances or the strongest SuperHyperAlliances in those neutrosophic SuperHyperModels. For the longest SuperHyperAlliances, called SuperHyperAlliances, and the strongest SuperHyperCycle, called neutrosophic SuperHyperAlliances, some general results are introduced. Beyond that in SuperHyperStar, all possible SuperHyperPaths have only two SuperHyperEdges but it’s not enough since it’s essential to have at least three SuperHyperEdges to form any style of a SuperHyperCycle. There isn’t any formation of any SuperHyperCycle but literarily, it’s the deformation of any SuperHyperCycle. It, literarily, deforms and it doesn’t form. A basic familiarity with SuperHyperGraph theory and neutrosophic SuperHyperGraph theory are proposed.

The research is on the SuperHyperGirth and the neutrosophic SuperHyperGirth. A SuperHyperGraph has SuperHyperGirth where it’s the longest SuperHyperCycle. To get structural examples and instances, I’m going to introduce the next SuperHyperClass of SuperHyperGraph based on SuperHyperGirth. It’s the main. It’ll be disciplinary to have the foundation of previous definition in the kind of SuperHyperClass. This SuperHyperClass is officially called “SuperHyperFlower”. If there’s a need to have all SuperHyperCycles until the SuperHyperGirth, then it’s officially called “SuperHyperOrder” but otherwise, it isn’t SuperHyperOrder. There are two instances about the clarifications for the main definition titled “SuperHyperGirth”. These two examples get more scrutiny and discernment since there are characterized in the disciplinary ways of the SuperHyperClass based on SuperHyperGirth and they’re called “SuperHyperFlower.” A SuperHyperGraph has “neutrosophic SuperHyperGirth” where it’s the strongest [the maximum value from all SuperHyperCycles amid the minimum value amid all SuperHyperEdges from a SuperHyperCycle.] SuperHyperCycle. In “Cancer’s Recognitions”, the aim is to find either the longest SuperHyperCycle or the strongest SuperHyperCycle in those neutrosophic SuperHyperModels. For the longest SuperHyperCycle, called SuperHyperGirth, and the strongest SuperHyperCycle, called neutrosophic SuperHyperGirth, some general results are introduced. Beyond that in SuperHyperStar, all possible SuperHyperPaths have only two SuperHyperEdges but it’s not enough since it’s essential to have at least three SuperHyperEdges to form any style of a SuperHyperCycle. There isn’t any formation of any SuperHyperCycle but literarily, it’s the deformation of any SuperHyperCycle. It, literarily, deforms and it doesn’t form. A basic familiarity with SuperHyperGraph theory and neutrosophic SuperHyperGraph theory are proposed.

In this research, assume a SuperHyperGraph. Then a ``Failed SuperHyperStable'' $\mathcal{I}(NSHG)$ for a neutrosophic SuperHyperGraph $NSHG:(V,E)$ is the maximum cardinality of a SuperHyperSet $S$ of SuperHyperVertices such that there's a SuperHyperVertex to have a SuperHyperEdge in common. Assume a SuperHyperGraph. Then an ``$\delta-$Failed SuperHyperStable'' is a \underline{maximal} Failed SuperHyperStable of SuperHyperVertices with \underline{maximum} cardinality such that either of the following expressions hold for the (neutrosophic) cardinalities of SuperHyperNeighbors of $s\in S:$ $~|S\cap N(s)| > |S\cap (V\setminus N(s))|+\delta,~|S\cap N(s)| < |S\cap (V\setminus N(s))|+\delta.$ The first Expression, holds if $S$ is an ``$\delta-$SuperHyperOffensive''. And the second Expression, holds if $S$ is an ``$\delta-$SuperHyperDefensive''; a``neutrosophic $\delta-$Failed SuperHyperStable'' is a \underline{maximal} neutrosophic Failed SuperHyperStable of SuperHyperVertices with \underline{maximum} neutrosophic cardinality such that either of the following expressions hold for the neutrosophic cardinalities of SuperHyperNeighbors of $s\in S:$ $~|S\cap N(s)|_{neutrosophic} > |S\cap (V\setminus N(s))|_{neutrosophic}+\delta,~ |S\cap N(s)|_{neutrosophic} < |S\cap (V\setminus N(s))|_{neutrosophic}+\delta.$ The first Expression, holds if $S$ is a ``neutrosophic $\delta-$SuperHyperOffensive''. And the second Expression, holds if $S$ is a ``neutrosophic $\delta-$SuperHyperDefensive''. A basic familiarity with Extreme Failed SuperHyperClique theory, Neutrosophic Failed SuperHyperClique theory, and (Neutrosophic) SuperHyperGraphs theory are proposed.

In this research, new setting is introduced for new SuperHyperNotion, namely, 11 Neutrosophic 1-failed SuperHyperForcing. Two different types of SuperHyperDefinitions 12 are debut for them but the research goes further and the SuperHyperNotion, 13 SuperHyperUniform, and SuperHyperClass based on that are well-defined and 14 well-reviewed. The literature review is implemented in the whole of this research. For 15 shining the elegancy and the significancy of this research, the comparison between this 16 SuperHyperNotion with other SuperHyperNotions and fundamental 17 SuperHyperNumbers are featured. The definitions are followed by the examples and the 18 instances thus the clarifications are driven with different tools. The applications are 19 figured out to make sense about the theoretical aspect of this ongoing research. The 20 “Cancer’s Neutrosophic Recognition” are the under research to figure out the challenges 21 make sense about ongoing and upcoming research. The special case is up. The cells are 22 viewed in the deemed ways. There are different types of them. Some of them are 23 individuals and some of them are well-modeled by the group of cells. These types are all 24 officially called “SuperHyperVertex” but the relations amid them all officially called 25 “SuperHyperEdge”. The frameworks “SuperHyperGraph” and “neutrosophic 26 SuperHyperGraph” are chosen and elected to research about “Cancer’s Neutrosophic 27 Recognition”. Thus these complex and dense SuperHyperModels open up some avenues 28 to research on theoretical segments and “Cancer’s Neutrosophic Recognition”. Some 29 avenues are posed to pursue this research. It’s also officially collected in the form of 30 some questions and some problems. Assume a SuperHyperGraph. Then a “1-failed 31 SuperHyperForcing” Z(NSHG) for a neutrosophic SuperHyperGraph NSHG : (V,E) 32 is the maximum cardinality of a SuperHyperSet S of black SuperHyperVertices 33 (whereas SuperHyperVertices in V (G) \ S are colored white) such that V (G) isn’t 34 turned black after finitely many applications of “the color-change rule”: a white 35 SuperHyperVertex is converted to a black SuperHyperVertex if it is the only white 36 SuperHyperNeighbor of a black SuperHyperVertex. The additional condition is referred 37 by “1-” about the usage of any black SuperHyperVertex only once to act on white 38 SuperHyperVertex to be black SuperHyperVertex; a “neutrosophic 1-failed 39 SuperHyperForcing” Zn(NSHG) for a neutrosophic SuperHyperGraph NSHG : (V,E) 40 is the maximum neutrosophic cardinality of a SuperHyperSet S of black 41 SuperHyperVertices (whereas SuperHyperVertices in V (G) \ S are colored white) such 42 that V (G) isn’t turned black after finitely many applications of “the color-change rule”: 43 a white SuperHyperVertex is converted to a black SuperHyperVertex if it is the only 44 1/128 white SuperHyperNeighbor of a black SuperHyperVertex. The additional condition is 45 referred by “1-” about the usage of any black SuperHyperVertex only once to act on 46 white SuperHyperVertex to be black SuperHyperVertex. Assume a SuperHyperGraph. 47 Then an “δ−1-failed SuperHyperForcing” is a maximal 1-failed SuperHyperForcing of 48 SuperHyperVertices with maximum cardinality such that either of the following 49 expressions hold for the (neutrosophic) cardinalities of SuperHyperNeighbors of s ∈ S : 50 |S ∩N(s)| > |S ∩(V \N(s))|+δ, |S ∩N(s)| < |S ∩(V \N(s))|+δ. The first Expression, 51 holds if S is an “δ−SuperHyperOffensive”. And the second Expression, holds if S is an 52 “δ−SuperHyperDefensive”; a“neutrosophic δ−1-failed SuperHyperForcing” is a maximal 53 neutrosophic 1-failed SuperHyperForcing of SuperHyperVertices with maximum 54 neutrosophic cardinality such that either of the following expressions hold for the 55 neutrosophic cardinalities of SuperHyperNeighbors of s ∈ S : |S ∩ N(s)|neutrosophic > 56 |S ∩ (V \ N (s))|neutrosophic + δ, |S ∩ N (s)|neutrosophic < |S ∩ (V \ N (s))|neutrosophic + δ. 57 The first Expression, holds if S is a “neutrosophic δ−SuperHyperOffensive”. And the 58 second Expression, holds if S is a “neutrosophic δ−SuperHyperDefensive”. It’s useful to 59 define “neutrosophic” version of 1-failed SuperHyperForcing. Since there’s more ways to 60 get type-results to make 1-failed SuperHyperForcing more understandable. For the sake 61 of having neutrosophic 1-failed SuperHyperForcing, there’s a need to “redefine” the 62 notion of “1-failed SuperHyperForcing”. The SuperHyperVertices and the 63 SuperHyperEdges are assigned by the labels from the letters of the alphabets. In this 64 procedure, there’s the usage of the position of labels to assign to the values. Assume a 65 1-failed SuperHyperForcing. It’s redefined neutrosophic 1-failed SuperHyperForcing if 66 the mentioned Table holds, concerning, “The Values of Vertices, SuperVertices, Edges, 67 HyperEdges, and SuperHyperEdges Belong to The Neutrosophic SuperHyperGraph” 68 with the key points, “The Values of The Vertices & The Number of Position in 69 Alphabet”, “The Values of The SuperVertices&The maximum Values of Its Vertices”, 70 “The Values of The Edges&The maximum Values of Its Vertices”, “The Values of The 71 HyperEdges&The maximum Values of Its Vertices”, “The Values of The 72 SuperHyperEdges&The maximum Values of Its Endpoints”. To get structural examples 73 and instances, I’m going to introduce the next SuperHyperClass of SuperHyperGraph 74 based on 1-failed SuperHyperForcing. It’s the main. It’ll be disciplinary to have the 75 foundation of previous definition in the kind of SuperHyperClass. If there’s a need to 76 have all SuperHyperConnectivities until the 1-failed SuperHyperForcing, then it’s 77 officially called “1-failed SuperHyperForcing” but otherwise, it isn’t 1-failed 78 SuperHyperForcing. There are some instances about the clarifications for the main 79 definition titled “1-failed SuperHyperForcing”. These two examples get more scrutiny 80 and discernment since there are characterized in the disciplinary ways of the 81 SuperHyperClass based on 1-failed SuperHyperForcing. For the sake of having 82 neutrosophic 1-failed SuperHyperForcing, there’s a need to “redefine” the notion of 83 “neutrosophic 1-failed SuperHyperForcing” and “neutrosophic 1-failed 84 SuperHyperForcing”. The SuperHyperVertices and the SuperHyperEdges are assigned 85 by the labels from the letters of the alphabets. In this procedure, there’s the usage of 86 the position of labels to assign to the values. Assume a neutrosophic SuperHyperGraph. 87 It’s redefined “neutrosophic SuperHyperGraph” if the intended Table holds. And 88 1-failed SuperHyperForcing are redefined “neutrosophic 1-failed SuperHyperForcing” if 89 the intended Table holds. It’s useful to define “neutrosophic” version of 90 SuperHyperClasses. Since there’s more ways to get neutrosophic type-results to make 91 neutrosophic 1-failed SuperHyperForcing more understandable. Assume a neutrosophic 92 SuperHyperGraph. There are some neutrosophic SuperHyperClasses if the intended 93 Table holds. Thus SuperHyperPath, SuperHyperCycle, SuperHyperStar, 94 SuperHyperBipartite, SuperHyperMultiPartite, and SuperHyperWheel, are 95 “neutrosophic SuperHyperPath”, “neutrosophic SuperHyperCycle”, “neutrosophic 96 SuperHyperStar”, “neutrosophic SuperHyperBipartite”, “neutrosophic 97 2/128 SuperHyperMultiPartite”, and “neutrosophic SuperHyperWheel” if the intended Table 98 holds. A SuperHyperGraph has “neutrosophic 1-failed SuperHyperForcing” where it’s 99 the strongest [the maximum neutrosophic value from all 1-failed SuperHyperForcing 100 amid the maximum value amid all SuperHyperVertices from a 1-failed 101 SuperHyperForcing.] 1-failed SuperHyperForcing. A graph is SuperHyperUniform if it’s 102 SuperHyperGraph and the number of elements of SuperHyperEdges are the same. 103 Assume a neutrosophic SuperHyperGraph. There are some SuperHyperClasses as 104 follows. It’s SuperHyperPath if it’s only one SuperVertex as intersection amid two given 105 SuperHyperEdges with two exceptions; it’s SuperHyperCycle if it’s only one 106 SuperVertex as intersection amid two given SuperHyperEdges; it’s SuperHyperStar it’s 107 only one SuperVertex as intersection amid all SuperHyperEdges; it’s 108 SuperHyperBipartite it’s only one SuperVertex as intersection amid two given 109 SuperHyperEdges and these SuperVertices, forming two separate sets, has no 110 SuperHyperEdge in common; it’s SuperHyperMultiPartite it’s only one SuperVertex as 111 intersection amid two given SuperHyperEdges and these SuperVertices, forming multi 112 separate sets, has no SuperHyperEdge in common; it’s SuperHyperWheel if it’s only one 113 SuperVertex as intersection amid two given SuperHyperEdges and one SuperVertex has 114 one SuperHyperEdge with any common SuperVertex. The SuperHyperModel proposes 115 the specific designs and the specific architectures. The SuperHyperModel is officially 116 called “SuperHyperGraph” and “Neutrosophic SuperHyperGraph”. In this 117 SuperHyperModel, The “specific” cells and “specific group” of cells are 118 SuperHyperModeled as “SuperHyperVertices” and the common and intended properties 119 between “specific” cells and “specific group” of cells are SuperHyperModeled as 120 “SuperHyperEdges”. Sometimes, it’s useful to have some degrees of determinacy, 121 indeterminacy, and neutrality to have more precise SuperHyperModel which in this case 122 the SuperHyperModel is called “neutrosophic”. In the future research, the foundation 123 will be based on the “Cancer’s Neutrosophic Recognition” and the results and the 124 definitions will be introduced in redeemed ways. The neutrosophic recognition of the 125 cancer in the long-term function. The specific region has been assigned by the model 126 [it’s called SuperHyperGraph] and the long cycle of the move from the cancer is 127 identified by this research. Sometimes the move of the cancer hasn’t be easily identified 128 since there are some determinacy, indeterminacy and neutrality about the moves and 129 the effects of the cancer on that region; this event leads us to choose another model [it’s 130 said to be neutrosophic SuperHyperGraph] to have convenient perception on what’s 131 happened and what’s done. There are some specific models, which are well-known and 132 they’ve got the names, and some SuperHyperGeneral SuperHyperModels. The moves 133 and the traces of the cancer on the complex tracks and between complicated groups of 134 cells could be fantasized by a neutrosophic SuperHyperPath(-/SuperHyperCycle, 135 SuperHyperStar, SuperHyperBipartite, SuperHyperMultipartite, SuperHyperWheel). 136 The aim is to find either the longest 1-failed SuperHyperForcing or the strongest 137 1-failed SuperHyperForcing in those neutrosophic SuperHyperModels. For the longest 138 1-failed SuperHyperForcing, called 1-failed SuperHyperForcing, and the strongest 139 SuperHyperCycle, called neutrosophic 1-failed SuperHyperForcing, some general results 140 are introduced. Beyond that in SuperHyperStar, all possible SuperHyperPaths have 141 only two SuperHyperEdges but it’s not enough since it’s essential to have at least three 142 SuperHyperEdges to form any style of a SuperHyperCycle. There isn’t any formation of 143 any SuperHyperCycle but literarily, it’s the deformation of any SuperHyperCycle. It, 144 literarily, deforms and it doesn’t form. A basic familiarity with SuperHyperGraph 145 theory and neutrosophic SuperHyperGraph theory are proposed.

In this research, assume a SuperHyperGraph. Then an extreme SuperHyperMatching $\mathcal{C}(NSHG)$ for a neutrosophic SuperHyperGraph $NSHG:(V,E)$ is the maximum cardinality of a SuperHyperSet $S$ of high cardinality SuperHyperEdges such that there's no SuperHyperVertex not to in a SuperHyperEdge and there's no SuperHyperEdge to have a SuperHyperVertex in a SuperHyperEdge; a neutrosophic SuperHyperMatching $\mathcal{C}(NSHG)$ for a neutrosophic SuperHyperGraph $NSHG:(V,E)$ is the maximum neutrosophic cardinality of a neutrosophic SuperHyperSet $S$ of high neutrosophic cardinality neutrosophic SuperHyperEdges such that there's no neutrosophic SuperHyperVertex not to in a neutrosophic SuperHyperEdge and there's no neutrosophic SuperHyperEdge to have a neutrosophic SuperHyperVertex in a neutrosophic SuperHyperEdge; an extreme SuperHyperMatching SuperHyperPolynomial $\mathcal{C}(NSHG)$ for a neutrosophic SuperHyperGraph $NSHG:(V,E)$ is the extreme SuperHyperPolynomial contains the coefficients defined as the number of the maximum cardinality of a SuperHyperSet $S$ of high cardinality SuperHyperEdges such that there's no SuperHyperVertex not to in a SuperHyperEdge and there's no SuperHyperEdge to have a SuperHyperVertex in a SuperHyperEdge and the power is corresponded to its coefficient; a neutrosophic SuperHyperMatching SuperHyperPolynomial $\mathcal{C}(NSHG)$ for a neutrosophic SuperHyperGraph $NSHG:(V,E)$ is the neutrosophic SuperHyperPolynomial contains the neutrosophic coefficients defined as the neutrosophic number of the maximum neutrosophic cardinality of a neutrosophic SuperHyperSet $S$ of high neutrosophic cardinality neutrosophic SuperHyperEdges such that there's no neutrosophic SuperHyperVertex not to in a neutrosophic SuperHyperEdge and there's no neutrosophic SuperHyperEdge to have a neutrosophic SuperHyperVertex in a neutrosophic SuperHyperEdge and the neutrosophic power is neutrosophicly corresponded to its neutrosophic coefficient; an extreme R-SuperHyperMatching $\mathcal{C}(NSHG)$ for a neutrosophic SuperHyperGraph $NSHG:(V,E)$ is the maximum cardinality of a SuperHyperSet $S$ of high cardinality SuperHyperVertices such that there's no SuperHyperVertex not to in a SuperHyperEdge and there's no SuperHyperEdge to have a SuperHyperVertex in a SuperHyperEdge; a neutrosophic R-SuperHyperMatching $\mathcal{C}(NSHG)$ for a neutrosophic SuperHyperGraph $NSHG:(V,E)$ is the maximum neutrosophic cardinality of a neutrosophic SuperHyperSet $S$ of high neutrosophic cardinality neutrosophic SuperHyperVertices such that there's no neutrosophic SuperHyperVertex not to in a neutrosophic SuperHyperEdge and there's no neutrosophic SuperHyperEdge to have a neutrosophic SuperHyperVertex in a neutrosophic SuperHyperEdge; an extreme R-SuperHyperMatching SuperHyperPolynomial $\mathcal{C}(NSHG)$ for a neutrosophic SuperHyperGraph $NSHG:(V,E)$ is the extreme SuperHyperPolynomial contains the coefficients defined as the number of the maximum cardinality of a SuperHyperSet $S$ of high cardinality SuperHyperVertices such that there's no SuperHyperVertex not to in a SuperHyperEdge and there's no SuperHyperEdge to have a SuperHyperVertex in a SuperHyperEdge and the power is corresponded to its coefficient; a neutrosophic R-SuperHyperMatching SuperHyperPolynomial $\mathcal{C}(NSHG)$ for a neutrosophic SuperHyperGraph $NSHG:(V,E)$ is the neutrosophic SuperHyperPolynomial contains the neutrosophic coefficients defined as the neutrosophic number of the maximum neutrosophic cardinality of a neutrosophic SuperHyperSet $S$ of high neutrosophic cardinality neutrosophic SuperHyperVertices such that there's no neutrosophic SuperHyperVertex not to in a neutrosophic SuperHyperEdge and there's no neutrosophic SuperHyperEdge to have a neutrosophic SuperHyperVertex in a neutrosophic SuperHyperEdge and the neutrosophic power is neutrosophicly corresponded to its neutrosophic coefficient. Assume a SuperHyperGraph. Then $\delta-$SuperHyperMatching is a maximal of SuperHyperVertices with a maximum cardinality such that either of the following expressions hold for the (neutrosophic) cardinalities of SuperHyperNeighbors of $s\in S:$ there are $|S\cap N(s)| > |S\cap (V\setminus N(s))|+\delta;$ and $ |S\cap N(s)| < |S\cap (V\setminus N(s))|+\delta.$ The first Expression, holds if $S$ is an $\delta-$SuperHyperOffensive. And the second Expression, holds if $S$ is an $\delta-$SuperHyperDefensive; a neutrosophic $\delta-$SuperHyperMatching is a maximal neutrosophic of SuperHyperVertices with maximum neutrosophic cardinality such that either of the following expressions hold for the neutrosophic cardinalities of SuperHyperNeighbors of $s\in S$ there are: $|S\cap N(s)|_{neutrosophic} > |S\cap (V\setminus N(s))|_{neutrosophic}+\delta;$ and $ |S\cap N(s)|_{neutrosophic} < |S\cap (V\setminus N(s))|_{neutrosophic}+\delta.$ The first Expression, holds if $S$ is a neutrosophic $\delta-$SuperHyperOffensive. And the second Expression, holds if $S$ is a neutrosophic $\delta-$SuperHyperDefensive It's useful to define a ``neutrosophic'' version of a SuperHyperMatching . Since there's more ways to get type-results to make a SuperHyperMatching more understandable. For the sake of having neutrosophic SuperHyperMatching, there's a need to ``redefine'' the notion of a ``SuperHyperMatching ''. A basic familiarity with Extreme SuperHyperMatching theory, SuperHyperGraphs, and Neutrosophic SuperHyperGraphs theory are proposed.

In this research, the extreme SuperHyperNotion, namely, extreme SuperHyperGirth, is up. $E_1$ and $E_3$ are some empty extreme SuperHyperEdges but $E_2$ is a loop extreme SuperHyperEdge and $E_4$ is an extreme SuperHyperEdge. Thus in the terms of extreme SuperHyperNeighbor, there's only one extreme SuperHyperEdge, namely, $E_4.$ The extreme SuperHyperVertex, $V_3$ is extreme isolated means that there's no extreme SuperHyperEdge has it as an extreme endpoint. Thus the extreme SuperHyperVertex, $V_3,$ is excluded in every given extreme SuperHyperGirth. $ \mathcal{C}(NSHG)=\{E_i\}~\text{is an extreme SuperHyperGirth.} \ \ \mathcal{C}(NSHG)=jz^i~\text{is an extreme SuperHyperGirth SuperHyperPolynomial.} \ \ \mathcal{C}(NSHG)=\{V_i\}~\text{is an extreme R-SuperHyperGirth.} \ \ \mathcal{C}(NSHG)=jz^I~{\small\text{is an extreme R-SuperHyperGirth SuperHyperPolynomial.}} $ The following extreme SuperHyperSet of extreme SuperHyperEdges[SuperHyperVertices] is the extreme type-SuperHyperSet of the extreme SuperHyperGirth. The extreme SuperHyperSet of extreme SuperHyperEdges[SuperHyperVertices], is the extreme type-SuperHyperSet of the extreme SuperHyperGirth. The extreme SuperHyperSet of the extreme SuperHyperEdges[SuperHyperVertices], is an extreme SuperHyperGirth $\mathcal{C}(ESHG)$ for an extreme SuperHyperGraph $ESHG:(V,E)$ is an extreme type-SuperHyperSet with the maximum extreme cardinality of an extreme SuperHyperSet $S$ of extreme SuperHyperEdges[SuperHyperVertices] such that there's only one extreme consecutive sequence of the extreme SuperHyperVertices and the extreme SuperHyperEdges form only one extreme SuperHyperCycle. There are not only four extreme SuperHyperVertices inside the intended extreme SuperHyperSet. Thus the non-obvious extreme SuperHyperGirth isn't up. The obvious simple extreme type-SuperHyperSet called the extreme SuperHyperGirth is an extreme SuperHyperSet includes only less than four extreme SuperHyperVertices. But the extreme SuperHyperSet of the extreme SuperHyperEdges[SuperHyperVertices], doesn't have less than four SuperHyperVertices inside the intended extreme SuperHyperSet. Thus the non-obvious simple extreme type-SuperHyperSet of the extreme SuperHyperGirth isn't up. To sum them up, the extreme SuperHyperSet of the extreme SuperHyperEdges[SuperHyperVertices], isn't the non-obvious simple extreme type-SuperHyperSet of the extreme SuperHyperGirth. Since the extreme SuperHyperSet of the extreme SuperHyperEdges[SuperHyperVertices], is an extreme SuperHyperGirth $\mathcal{C}(ESHG)$ for an extreme SuperHyperGraph $ESHG:(V,E)$ is the extreme SuperHyperSet $S$ of extreme SuperHyperVertices[SuperHyperEdges] such that there's only one extreme consecutive extreme sequence of extreme SuperHyperVertices and extreme SuperHyperEdges form only one extreme SuperHyperCycle given by that extreme type-SuperHyperSet called the extreme SuperHyperGirth and it's an extreme SuperHyperGirth . Since it 's the maximum extreme cardinality of an extreme SuperHyperSet $S$ of extreme SuperHyperEdges[SuperHyperVertices] such that there's only one extreme consecutive extreme sequence of extreme SuperHyperVertices and extreme SuperHyperEdges form only one extreme SuperHyperCycle. There are only less than four extreme SuperHyperVertices inside the intended extreme SuperHyperSet, thus the obvious extreme SuperHyperGirth, is up. The obvious simple extreme type-SuperHyperSet of the extreme SuperHyperGirth, is: ,is the extreme SuperHyperSet, is: does includes only less than four SuperHyperVertices in a connected extreme SuperHyperGraph $ESHG:(V,E).$ It's interesting to mention that the only simple extreme type-SuperHyperSet called the extreme SuperHyperGirth amid those obvious[non-obvious] simple extreme type-SuperHyperSets called the neutrosophic SuperHyperGirth , is only and only. A basic familiarity with extreme SuperHyperGirth theory, SuperHyperGraphs, and extreme SuperHyperGraphs theory are proposed.

In this research, assume a SuperHyperGraph. Then a ``Failed SuperHyperClique'' $\mathcal{C}(NSHG)$ for a neutrosophic SuperHyperGraph $NSHG:(V,E)$ is the maximum cardinality of a SuperHyperSet $S$ of SuperHyperVertices such that there's a SuperHyperVertex to have a SuperHyperEdge in common. Assume a SuperHyperGraph. Then an ``$\delta-$Failed SuperHyperClique'' is a \underline{maximal} Failed SuperHyperClique of SuperHyperVertices with \underline{maximum} cardinality such that either of the following expressions hold for the (neutrosophic) cardinalities of SuperHyperNeighbors of $s\in S:$ $~|S\cap N(s)| > |S\cap (V\setminus N(s))|+\delta,~|S\cap N(s)| < |S\cap (V\setminus N(s))|+\delta.$ The first Expression, holds if $S$ is an ``$\delta-$SuperHyperOffensive''. And the second Expression, holds if $S$ is an ``$\delta-$SuperHyperDefensive''; a``neutrosophic $\delta-$Failed SuperHyperClique'' is a \underline{maximal} neutrosophic Failed SuperHyperClique of SuperHyperVertices with \underline{maximum} neutrosophic cardinality such that either of the following expressions hold for the neutrosophic cardinalities of SuperHyperNeighbors of $s\in S:$ $~|S\cap N(s)|_{neutrosophic} > |S\cap (V\setminus N(s))|_{neutrosophic}+\delta,~ |S\cap N(s)|_{neutrosophic} < |S\cap (V\setminus N(s))|_{neutrosophic}+\delta.$ The first Expression, holds if $S$ is a ``neutrosophic $\delta-$SuperHyperOffensive''. And the second Expression, holds if $S$ is a ``neutrosophic $\delta-$SuperHyperDefensive''. A basic familiarity with Neutrosophic Failed SuperHyperClique theory, SuperHyperGraphs theory, and Neutrosophic SuperHyperGraphs theory are proposed.

New ideas on the framework of Neutrosophic SuperHyperGraph for different styles of Neutrosophic SuperHyper-Bipartite and Neutrosophic SuperHyper-Path are introduced. More instances and more clarifications alongside sufficient references.

In this research, assume a SuperHyperGraph. Then a “SuperHyperForcing” Z(NSHG) for a neutrosophic SuperHyperGraph NSHG : (V,E) is the minimum cardinality of a SuperHyperSet S of black SuperHyperVertices (whereas SuperHyperVertices in V (G) \ S are colored white) such that V (G) is turned black after finitely many applications of “the color-change rule”: a white SuperHyperVertex is converted to a black SuperHyperVertex if it is the only white SuperHyperNeighbor of a black SuperHyperVertex; a “neutrosophic SuperHyperForcing” Zn(NSHG) for a neutrosophic SuperHyperGraph NSHG : (V,E) is the minimum neutrosophic cardinality of a SuperHyperSet S of black SuperHyperVertices (whereas SuperHyperVertices in V (G) \ S are colored white) such that V (G) is turned black after finitely many applications of “the color-change rule”: a white SuperHyperVertex is converted to a black SuperHyperVertex if it is the only white SuperHyperNeighbor of a black SuperHyperVertex. Assume a SuperHyperGraph. Then a “SuperHyperForcing” Z(NSHG) for a neutrosophic SuperHyperGraph NSHG : (V,E) is the minimum cardinality of a SuperHyperSet S of black SuperHyperVertices (whereas SuperHyperVertices in V (G) \ S are colored white) such that V (G) is turned black after finitely many applications of “the color-change rule”: a white SuperHyperVertex is converted to a black SuperHyperVertex if it is the only white SuperHyperNeighbor of a black SuperHyperVertex; a “neutrosophic SuperHyperForcing” Zn(NSHG) for a neutrosophic SuperHyperGraph NSHG : (V,E) is the minimum neutrosophic cardinality of a SuperHyperSet S of black SuperHyperVertices (whereas SuperHyperVertices in V (G) \ S are colored white) such that V (G) is turned black after finitely many applications of “the color-change rule”: a white SuperHyperVertex is converted to a black SuperHyperVertex if it is the only white SuperHyperNeighbor of a black SuperHyperVertex. Assume a SuperHyperGraph. Then an “δ−SuperHyperForcing” is a minimal SuperHyperForcing of SuperHyperVertices with minimum cardinality such that either of the following expressions hold for the (neutrosophic) cardinalities of SuperHyperNeighbors of s ∈ S : |S∩N(s)|>|S∩(V \N(s))|+δ, |S∩N(s)|<|S∩(V \N(s))|+δ.Thefirst Expression, holds if S is an “δ−SuperHyperOffensive”. And the second Expression, holds if S is an “δ−SuperHyperDefensive”; a“neutrosophic δ−SuperHyperForcing” is a minimal neutrosophic SuperHyperForcing of SuperHyperVertices with minimum neutrosophic cardinality such that either of the following expressions hold for the neutrosophic cardinalities of SuperHyperNeighbors of s ∈ S : |S ∩ N(s)|neutrosophic > |S ∩ (V \ N (s))|neutrosophic + δ, |S ∩ N (s)|neutrosophic < |S ∩ (V \ N (s))|neutrosophic + δ. The first Expression, holds if S is a “neutrosophic δ−SuperHyperOffensive”. And the second Expression, holds if S is a “neutrosophic δ−SuperHyperDefensive”. It’s useful to define “neutrosophic” version of SuperHyperForcing. Since there’s more ways to get type-results to make SuperHyperForcing more understandable. For the sake of having neutrosophic SuperHyperForcing, there’s a need to “redefine” the notion of “SuperHyperForcing”. The SuperHyperVertices and the SuperHyperEdges are assigned by the labels from the letters of the alphabets. In this procedure, there’s the usage of the position of labels to assign to the values. A basic familiarity with SuperHyperGraph theory and neutrosophic SuperHyperGraph theory are proposed.

New ideas on the framework of Neutrosophic SuperHyperGraph for different styles of Neutrosophic SuperHyper-Wheel and Neutrosophic SuperHyper-Star are introduced. More instances and more clarifications alongside sufficient references are featured with a specific type of independency of SuperHyperVertices.

In this research, new setting is introduced for new SuperHyperNotions, namely, an 1-failed SuperHyperForcing and Neutrosophic 1-failed SuperHyperForcing. Assume a SuperHyperGraph. Then an ``1-failed SuperHyperForcing'' $\mathcal{Z}(NSHG)$ for a neutrosophic SuperHyperGraph $NSHG:(V,E)$ is the maximum cardinality of a SuperHyperSet $S$ of black SuperHyperVertices (whereas SuperHyperVertices in $V(G) \setminus S$ are colored white) such that $V(G)$ isn't turned black after finitely many applications of ``the color-change rule'': a white SuperHyperVertex is converted to a black SuperHyperVertex if it is the only white SuperHyperNeighbor of a black SuperHyperVertex. The additional condition is referred by ``1-'' about the usage of any black SuperHyperVertex only once to act on white SuperHyperVertex to be black SuperHyperVertex; a ``neutrosophic 1-failed SuperHyperForcing'' $\mathcal{Z}_n(NSHG)$ for a neutrosophic SuperHyperGraph $NSHG:(V,E)$ is the maximum neutrosophic cardinality of a SuperHyperSet $S$ of black SuperHyperVertices (whereas SuperHyperVertices in $V(G) \setminus S$ are colored white) such that $V(G)$ isn't turned black after finitely many applications of ``the color-change rule'': a white SuperHyperVertex is converted to a black SuperHyperVertex if it is the only white SuperHyperNeighbor of a black SuperHyperVertex. The additional condition is referred by ``1-'' about the usage of any black SuperHyperVertex only once to act on white SuperHyperVertex to be black SuperHyperVertex. Assume a SuperHyperGraph. Then an ``$\delta-$1-failed SuperHyperForcing'' is a \underline{maximal} 1-failed SuperHyperForcing of SuperHyperVertices with \underline{maximum} cardinality such that either of the following expressions hold for the (neutrosophic) cardinalities of SuperHyperNeighbors of $s\in S:$ $~|S\cap N(s)| > |S\cap (V\setminus N(s))|+\delta,~|S\cap N(s)| < |S\cap (V\setminus N(s))|+\delta.$ The first Expression, holds if $S$ is an ``$\delta-$SuperHyperOffensive''. And the second Expression, holds if $S$ is an ``$\delta-$SuperHyperDefensive''; a``neutrosophic $\delta-$1-failed SuperHyperForcing'' is a \underline{maximal} neutrosophic 1-failed SuperHyperForcing of SuperHyperVertices with \underline{maximum} neutrosophic cardinality such that either of the following expressions hold for the neutrosophic cardinalities of SuperHyperNeighbors of $s\in S:$ $~|S\cap N(s)|_{neutrosophic} > |S\cap (V\setminus N(s))|_{neutrosophic}+\delta,~ |S\cap N(s)|_{neutrosophic} < |S\cap (V\setminus N(s))|_{neutrosophic}+\delta.$ The first Expression, holds if $S$ is a ``neutrosophic $\delta-$SuperHyperOffensive''. And the second Expression, holds if $S$ is a ``neutrosophic $\delta-$SuperHyperDefensive''. A basic familiarity with SuperHyperGraph theory and neutrosophic SuperHyperGraph theory are proposed.

In this research, new setting is introduced for new SuperHyperNotions, namely, SuperHyperDefensive SuperHyperAlliances and Neutrosophic SuperHyperDefensive SuperHyperAlliances. Two different types of SuperHyperDefinitions are debut for them but the research goes further and the SuperHyperNotion, SuperHyperUniform, and SuperHyperClass based on that are well-defined and well-reviewed. The literature review is implemented in the whole of this research. For shining the elegancy and the significancy of this research, the comparison between this SuperHyperNotion with other SuperHyperNotions and fundamental SuperHyperNumbers are featured. The definitions are followed by the examples and the instances thus the clarifications are driven with different tools. The applications are figured out to make sense about the theoretical aspect of this ongoing research. The “Cancer’s Recognitions” are the under research to figure out the challenges make sense about ongoing and upcoming research. The special case is up. The cells are viewed in the deemed ways. There are different types of them. Some of them are individuals and some of them are well-modeled by the group of cells. These types are all officially called “SuperHyperVertex” but the relations amid them all officially called “SuperHyperEdge”. The frameworks “SuperHyperGraph” and “neutrosophic SuperHyperGraph” are chosen and elected to research about “Cancer’s Recognitions”. Thus these complex and dense SuperHyperModels open up some avenues to research on theoretical segments and “Cancer’s Recognitions”. Some avenues are posed to pursue this research. It’s also officially collected in the form of some questions and some problems. Assume a SuperHyperGraph. An “SuperHyperAlliance” is a minimal SuperHyperSet of SuperHyperVertices with minimum cardinality such that either of the following expressions hold for the cardinalities of SuperHyperNeighbors of s∈S:,|S∩N(s)|>|S∩(V \N(s))|,and|S∩N(s)|<|S∩(V \N(s))|.Thefirst Expression, holds if S is SuperHyperOffensive. And the second Expression, holds if S is “SuperHyperDefensive”. It’s useful to define “neutrosophic” version of SuperHyperDefensive SuperHyperAlliances. Since there’s more ways to get type-results to make SuperHyperDefensive SuperHyperAlliances more understandable. For the sake of having neutrosophic SuperHyperDefensive SuperHyperAlliances, there’s a need to “redefine” the notion of “SuperHyperDefensive SuperHyperAlliances”. The SuperHyperVertices and the SuperHyperEdges are assigned by the labels from the letters of the alphabets. In this procedure, there’s the usage of the position of labels to assign to the values. Assume a SuperHyperAlliance. It’s redefined neutrosophic SuperHyperAlliance if the mentioned Table holds, concerning, “The Values of Vertices, SuperVertices, Edges, HyperEdges, and SuperHyperEdges Belong to The Neutrosophic SuperHyperGraph” with the key points, “The Values of The Vertices & The Number of Position in Alphabet”, “The Values of The SuperVertices&The Minimum Values of Its Vertices”, “The Values of The Edges&The Minimum Values of Its Vertices”, “The Values of The HyperEdges&The Minimum Values of Its Vertices”, “The Values of The SuperHyperEdges&The Minimum Values of Its Endpoints”. To get structural examples and instances, I’m going to introduce the next SuperHyperClass of SuperHyperGraph based on SuperHyperDefensive SuperHyperAlliances. It’s the main. It’ll be disciplinary to have the foundation of previous definition in the kind of SuperHyperClass. If there’s a need to have all SuperHyperConnectivities until the SuperHyperDefensive SuperHyperAlliances, then it’s officially called “SuperHyperDefensive SuperHyperAlliances” but otherwise, it isn’t SuperHyperDefensive SuperHyperAlliances. There are some instances about the clarifications for the main definition titled “SuperHyperDefensive SuperHyperAlliances”. These two examples get more scrutiny and discernment since there are characterized in the disciplinary ways of the SuperHyperClass based on SuperHyperDefensive SuperHyperAlliances. For the sake of having neutrosophic SuperHyperDefensive SuperHyperAlliances, there’s a need to “redefine” the notion of “neutrosophic SuperHyperDefensive SuperHyperAlliances” and “neutrosophic SuperHyperDefensive SuperHyperAlliances”. The SuperHyperVertices and the SuperHyperEdges are assigned by the labels from the letters of the alphabets. In this procedure, there’s the usage of the position of labels to assign to the values. Assume a neutrosophic SuperHyperGraph. It’s redefined “neutrosophic SuperHyperGraph” if the intended Table holds. And SuperHyperDefensive SuperHyperAlliances are redefined “neutrosophic SuperHyperDefensive SuperHyperAlliances” if the intended Table holds. It’s useful to define “neutrosophic” version of SuperHyperClasses. Since there’s more ways to get neutrosophic type-results to make neutrosophic SuperHyperDefensive SuperHyperAlliances more understandable. Assume a neutrosophic SuperHyperGraph. There are some neutrosophic SuperHyperClasses if the intended Table holds. Thus SuperHyperPath, SuperHyperCycle, SuperHyperStar, SuperHyperBipartite, SuperHyperMultiPartite, and SuperHyperWheel, are “neutrosophic SuperHyperPath”, “neutrosophic SuperHyperCycle”, “neutrosophic SuperHyperStar”, “neutrosophic SuperHyperBipartite”, “neutrosophic SuperHyperMultiPartite”, and “neutrosophic SuperHyperWheel” if the intended Table holds. A SuperHyperGraph has “neutrosophic SuperHyperDefensive SuperHyperAlliances” where it’s the strongest [the maximum neutrosophic value from all SuperHyperDefensive SuperHyperAlliances amid the maximum value amid all SuperHyperVertices from a SuperHyperDefensive SuperHyperAlliances.] SuperHyperDefensive SuperHyperAlliances. A graph is SuperHyperUniform if it’s SuperHyperGraph and the number of elements of SuperHyperEdges are the same. Assume a neutrosophic SuperHyperGraph. There are some SuperHyperClasses as follows. It’s SuperHyperPath if it’s only one SuperVertex as intersection amid two given SuperHyperEdges with two exceptions; it’s SuperHyperCycle if it’s only one SuperVertex as intersection amid two given SuperHyperEdges; it’s SuperHyperStar it’s only one SuperVertex as intersection amid all SuperHyperEdges; it’s SuperHyperBipartite it’s only one SuperVertex as intersection amid two given SuperHyperEdges and these SuperVertices, forming two separate sets, has no SuperHyperEdge in common; it’s SuperHyperMultiPartite it’s only one SuperVertex as intersection amid two given SuperHyperEdges and these SuperVertices, forming multi separate sets, has no SuperHyperEdge in common; it’s SuperHyperWheel if it’s only one SuperVertex as intersection amid two given SuperHyperEdges and one SuperVertex has one SuperHyperEdge with any common SuperVertex. The SuperHyperModel proposes the specific designs and the specific architectures. The SuperHyperModel is officially called “SuperHyperGraph” and “Neutrosophic SuperHyperGraph”. In this SuperHyperModel, The “specific” cells and “specific group” of cells are SuperHyperModeled as “SuperHyperVertices” and the common and intended properties between “specific” cells and “specific group” of cells are SuperHyperModeled as “SuperHyperEdges”. Sometimes, it’s useful to have some degrees of determinacy, indeterminacy, and neutrality to have more precise SuperHyperModel which in this case the SuperHyperModel is called “neutrosophic”. In the future research, the foundation will be based on the “Cancer’s Recognitions” and the results and the definitions will be introduced in redeemed ways. The recognition of the cancer in the long-term function. The specific region has been assigned by the model [it’s called SuperHyperGraph] and the long cycle of the move from the cancer is identified by this research. Sometimes the move of the cancer hasn’t be easily identified since there are some determinacy, indeterminacy and neutrality about the moves and the effects of the cancer on that region; this event leads us to choose another model [it’s said to be neutrosophic SuperHyperGraph] to have convenient perception on what’s happened and what’s done. There are some specific models, which are well-known and they’ve got the names, and some SuperHyperGeneral SuperHyperModels. The moves and the traces of the cancer on the complex tracks and between complicated groups of cells could be fantasized by a neutrosophic SuperHyperPath(-/SuperHyperCycle, SuperHyperStar, SuperHyperBipartite, SuperHyperMultipartite, SuperHyperWheel). The aim is to find either the longest SuperHyperDefensive SuperHyperAlliances or the strongest SuperHyperDefensive SuperHyperAlliances in those neutrosophic SuperHyperModels. For the longest SuperHyperDefensive SuperHyperAlliances, called SuperHyperDefensive SuperHyperAlliances, and the strongest SuperHyperCycle, called neutrosophic SuperHyperDefensive SuperHyperAlliances, some general results are introduced. Beyond that in SuperHyperStar, all possible SuperHyperPaths have only two SuperHyperEdges but it’s not enough since it’s essential to have at least three SuperHyperEdges to form any style of a SuperHyperCycle. There isn’t any formation of any SuperHyperCycle but literarily, it’s the deformation of any SuperHyperCycle. It, literarily, deforms and it doesn’t form. A basic familiarity with SuperHyperGraph theory and neutrosophic SuperHyperGraph theory are proposed.

I introduce now for the first time the neutrosophic modal logic. The Neutrosophic Modal Logic includes the neutrosophic operators that express the modalities. It is an extension of neutrosophic predicate logic, and of neutrosophic propositional logic. In order for the paper to be self-contained, I also recall the etymology and definition of neutrosophy and of neutrosophic logic. Several examples are presented as well.

In this research, new setting is introduced for assuming a SuperHyperGraph. Then a ``SuperHyperClique'' $\mathcal{C}(NSHG)$ for a neutrosophic SuperHyperGraph $NSHG:(V,E)$ is the maximum cardinality of a SuperHyperSet $S$ of SuperHyperVertices such that there's a SuperHyperVertex to have a SuperHyperEdge in common. Assume a SuperHyperGraph. Then an ``$\delta-$SuperHyperClique'' is a \underline{maximal} SuperHyperClique of SuperHyperVertices with \underline{maximum} cardinality such that either of the following expressions hold for the (neutrosophic) cardinalities of SuperHyperNeighbors of $s\in S:$ $~|S\cap N(s)| > |S\cap (V\setminus N(s))|+\delta,~|S\cap N(s)| < |S\cap (V\setminus N(s))|+\delta.$ The first Expression, holds if $S$ is an ``$\delta-$SuperHyperOffensive''. And the second Expression, holds if $S$ is an ``$\delta-$SuperHyperDefensive''; a``neutrosophic $\delta-$SuperHyperClique'' is a \underline{maximal} neutrosophic SuperHyperClique of SuperHyperVertices with \underline{maximum} neutrosophic cardinality such that either of the following expressions hold for the neutrosophic cardinalities of SuperHyperNeighbors of $s\in S:$ $~|S\cap N(s)|_{neutrosophic} > |S\cap (V\setminus N(s))|_{neutrosophic}+\delta,~ |S\cap N(s)|_{neutrosophic} < |S\cap (V\setminus N(s))|_{neutrosophic}+\delta.$ The first Expression, holds if $S$ is a ``neutrosophic $\delta-$SuperHyperOffensive''. And the second Expression, holds if $S$ is a ``neutrosophic $\delta-$SuperHyperDefensive''. A basic familiarity with Extreme SuperHyperClique theory, SuperHyperGraphs, and Neutrosophic SuperHyperGraphs theory are proposed.

In this research article, the notions of SuperHyperDominating and SuperHyperResolving are defined in the setting of neutrosophic SuperHyperGraphs. Some ideas are introduced on both notions of SuperHyperDominating and SuperHyperResolving, simultaneously and as the same with each other. Some neutrosophic SuperHyperClasses are defined based on the notion, SuperHyperResolving. The terms of duality, totality, perfectness, connectedness, and stable, are added to basic framework and initial notions, SuperHyperDominating and SuperHyperResolving but the concentration is on the “perfectness” to figure out what’s going on when for all targeted SuperHyperVertices, there’s only one SuperHyperVertex in the intended set. There are some instances and some clarifications to make sense about what’s happened and what’s done in the starting definitions. The key point is about the minimum sets. There are some questions and some problems to be taken as some avenues to pursue this study and this research. A basic familiarity with SuperHyperGraph theory and neutrosophic SuperHyperGraph theory are proposed.

New setting is introduced to study neutrosophic failed-independent number and failed independent neutrosophic-number arising neighborhood of different vertices. Neighbor is a key term to have these notions. Having all possible edges amid vertices in a set is a key type of approach to have these notions namely neutrosophic failed-independent number and failed independent neutrosophic-number. Two numbers are obtained but now both settings leads to approach is on demand which is finding biggest set which have all vertices which are neighbors. Let NTG : (V,E,σ,μ) be a neutrosophic graph. Then failed independent number I(NTG) for a neutrosophic graph NTG : (V,E,σ,μ) is maximum cardinality of a set S of vertices such that every two vertices of S are endpoints for an edge, simultaneously; failed independent neutrosophic-number In(NTG) for a neutrosophic graph NTG : (V,E,σ,μ) is maximum neutrosophic cardinality of a set S of vertices such that every two vertices of S are endpoints for an edge, simultaneously. As concluding results, there are some statements, remarks, examples and clarifications about some classes of neutrosophic graphs namely path-neutrosophic graphs, cycle-neutrosophic graphs, complete-neutrosophic graphs, star-neutrosophic graphs, complete-bipartite-neutrosophic graphs and complete-t-partite-neutrosophic graphs. The clarifications are also presented in both sections “Setting of Neutrosophic Failed-Independent Number,” and “Setting of Failed Independent Neutrosophic-Number,” for introduced results and used classes. Neutrosophic number is reused in this way. It’s applied to use the type of neutrosophic number in the way that, three values of a vertex are used and they’ve same share to construct this number to compare with other vertices. Summation of three values of vertex makes one number and applying it to a comparison. This approach facilitates identifying vertices which form neutrosophic failed-independent number and failed independent neutrosophic-number arising neighborhoods of vertices. In path-neutrosophic graphs, two neighbors, form maximal set but with slightly differences, in cycle-neutrosophic graphs, two neighbors forms maximal set. Other classes have same approaches. In complete-neutrosophic graphs, a set of all vertices leads us to neutrosophic failed-independent number and failed independent neutrosophic-number. In star-neutrosophic graphs, a set of vertices containing only center and one other vertex, makes maximal set. In complete-bipartite-neutrosophic graphs, a set of vertices including two vertices from different parts makes intended set but with slightly differences, in complete-t-partite-neutrosophic graphs, a set of t vertices from different parts makes intended set. In both settings, some classes of well-known neutrosophic graphs are studied. Some clarifications for each result and each definition are provided. Using basic set to extend this set to set of all vertices has key role to have these notions in the form of neutrosophic failed-independent number and failed independent neutrosophic-number arising neighborhood of vertices. The cardinality of a set has eligibility to neutrosophic failed-independent number but the neutrosophic cardinality of a set has eligibility to call failed independent neutrosophic-number. Some results get more frameworks and perspective about these definitions. The way in that, two vertices have connections amid each other, opens the way to do some approaches. A vertex could affect on other vertex but there’s no usage of edges. These notions are applied into neutrosophic graphs as individuals but not family of them as drawbacks for these notions. Finding special neutrosophic graphs which are well-known, is an open way to pursue this study. Some problems are proposed to pursue this study. Basic familiarities with graph theory and neutrosophic graph theory are proposed for this article.

New setting is introduced to study quasi-degree and quasi-co-degree arising from co-neighborhood. quasi-degree and quasi-co-degree is about a vertex which are applied into the setting of neutrosophic graphs. . The structure of set is studied and general results are obtained. Also, some classes of neutrosophic graphs namely path-neutrosophic graphs, cycle-neutrosophic graphs, complete-neutrosophic graphs and star-neutrosophic graphs, complete-bipartite-neutrosophic graphs and complete-multipartite-neutrosophic graphs are investigated in the terms of a vertex which is called either quasi-degree or quasi-co-degree. Neutrosophic number is reused in this way. It’s applied to use the type of neutrosophic number in the way that, three values of a vertex are used and they’ve same share to construct this number to compare with other vertices. Summation of three values of vertex makes one number and applying it to a comparison. This approach facilitates identifying vertices which form quasi-degree and quasi-co-degree. Quasi-degree is a value of a vertex which is maximum amid all values of vertices which are neighbors to a fixed vertex. Quasi-co-degree is a value of an edge which is maximum amid all values of edges which are neighbors to a fixed vertex but corresponded vertex is representative for this notion. Using different values which are related to a vertex inspire us to focus on edge and vertices which are corresponded to a fixed vertex. The notion of neighborhood is used to collect either vertices are titled neighbors or edges are incident to fixed vertex. In both settings, some classes of well-known neutrosophic graphs are studied. Some clarifications for each result and each definitions are provided. Using fixed vertex has key role to have these notions in the form of vertex or edge. The value of an edge has eligibility to call quasi-co-degree but the value of a vertex has eligibility to call quasi-degree. Some results get more frameworks and perspective about these definitions. The way in that, two vertices have connection together, open the way to define neighborhood and co-neighborhood. The maximum values in neighborhood and co-neighborhood introduces quasi-degree and quasi-co-degree, respectively. New name is chosen from degree. Since amid all vertices with different degrees, one vertex is chosen. In other words, one vertex is fixed and its degree turns out quasi-degree where two degrees could be assigned to a vertex. Degree of edges and degree of vertices. The number of edges which are incident to the vertex and the number of vertices which are neighbors to the vertex. Degree and co-degree are the notions which are transformed to use in quasi-style. Two neutrosophic values introduce two neutrosophic vertices separately in each settings. These notions are applied into neutrosophic graphs as individuals but not family of them as drawbacks for these notions. Finding special neutrosophic graphs which are well-known, is an open way to purse this study. Some problems are proposed to pursue this study. Basic familiarities with graph theory and neutrosophic graph theory are proposed for this article.

Many various using of this new-born fuzzy model for solving real-world problems and urgent requirements involve introducing new concept for analyzing the situations which leads to solve them by proper, quick and ecient method based on statistical data. This gap between the model and its solution cause that we introduce nikfar domination in neutrosophic graphs as creative and eective tool for studying a few selective vertices of this model instead of all ones by using special edges. Being special selection of these edges aect to achieve quick and proper solution to these problems. Domination hasn't ever been introduced. So we don't have any comparison with another denitions. The most used graphs which have properties of being complete, empty, bipartite, tree and like stu and they also achieve the names for themselves, are studied as fuzzy models for getting nikfar dominating set or at least becoming so close to it. We also get the relations between this special edge which plays main role in doing dominating with other special types of edges of graph like bridges. Finally, the relation between this number with other special numbers and characteristic of graph like order are discussed.

New setting is introduced to study chromatic number. Neutrosophic chromatic number and chromatic number are proposed in this way, some results are obtained. Classes of neutrosophic graphs are used to obtains these numbers and the representatives of the colors. Using colors to assigns to the vertices of neutrosophic graphs is applied. Some questions and problems are posed concerning ways to do further studies on this topic. Using strong edge to define the relation amid vertices which implies having different colors amid them and as consequences, choosing one vertex as a representative of each color to use them in a set of representatives and finally, using neutrosophic cardinality of this set to compute neutrosophic chromatic number. This specific relation amid edges is necessary to compute both chromatic number concerning the number of representative in the set of representatives and neutrosophic chromatic number concerning neutrosophic cardinality of set of representatives. If two vertices have no strong edge, then they can be assigned to same color even they’ve common edge. Basic familiarities with neutrosophic graph theory and graph theory are proposed for this article.

New setting is introduced to study chromatic number. Different types of chromatic numbers and neutrosophic chromatic number are proposed in this way, some results are obtained. Classes of neutrosophic graphs are used to obtains these numbers and the representatives of the colors. Using colors to assign to the vertices of neutrosophic graphs is applied. Some questions and problems are posed concerning ways to do further studies on this topic. Using different types of edges from connectedness in same neutrosophic graphs and in modified neutrosophic graphs to define the relation amid vertices which implies having different colors amid them and as consequences, choosing one vertex as a representative of each color to use them in a set of representatives and finally, using neutrosophic cardinality of this set to compute types of chromatic numbers. This specific relation amid edges is necessary to compute both types of chromatic number concerning the number of representative in the set of representatives and types of neutrosophic chromatic number concerning neutrosophic cardinality of set of representatives. If two vertices have no intended edge, then they can be assigned to same color even they’ve common edge. Basic familiarities with neutrosophic graph theory and graph theory are proposed for this article.

New setting is introduced to study chromatic number. vital chromatic number and n-vital chromatic number are proposed in this way, some results are obtained. Classes of neutrosophic graphs are used to obtains these numbers and the representatives of the colors. Using colors to assign to the vertices of neutrosophic graphs is applied. Some questions and problems are posed concerning ways to do further studies on this topic. Using vital edge from connectedness to define the relation amid vertices which implies having different colors amid them and as consequences, choosing one vertex as a representative of each color to use them in a set of representatives and finally, using neutrosophic cardinality of this set to compute vital chromatic number. This specific relation amid edges is necessary to compute both vital chromatic number concerning the number of representative in the set of representatives and n-vital chromatic number concerning neutrosophic cardinality of set of representatives. If two vertices have no vital edge, then they can be assigned to same color even they’ve common edge. Basic familiarities with neutrosophic graph theory and graph theory are proposed for this article.

New setting is introduced to study “closing numbers” and “super-closing numbers” as optimal-super-resolving number, optimal-super-coloring number and optimal-super-dominating number. In this way, some approaches are applied to get some sets from (Neutrosophic)n-SuperHyperGraph and after that, some ideas are applied to get different types of super-closing numbers which are called by optimal-super-resolving number, optimal-super-coloring number and optimal-super-dominating number. The notion of dual is another new idea which is covered by these notions and results. In the setting of dual, the set of super-vertices is exchanged with the set of super-edges. Thus these results and definitions hold in the setting of dual. Setting of neutrosophic n-SuperHyperGraph is used to get some examples and solutions for two applications which are proposed. Both setting of SuperHyperGraph and neutrosophic n-SuperHyperGraph are simultaneously studied but the results are about the setting of n-SuperHyperGraphs. Setting of neutrosophic n-SuperHyperGraph get some examples where neutrosophic hypergraphs as special case of neutrosophic n-SuperHyperGraph are used. The clarifications use neutrosophic n-SuperHyperGraph and theoretical study is to use n-SuperHyperGraph but these results are also applicable into neutrosophic n-SuperHyperGraph. Special usage from different attributes of neutrosophic n-SuperHyperGraph are appropriate to have open ways to pursue this study. Different types of procedures including optimal-super-set, and optimal-super-number alongside study on the family of (neutrosophic)n-SuperHyperGraph are proposed in this way, some results are obtained. General classes of (neutrosophic)n-SuperHyperGraph are used to obtains these closing numbers and super-closing numbers and the representatives of the optimal-super-coloring sets, optimal-super-dominating sets and optimal-super-resolving sets. Using colors to assign to the super-vertices of n-SuperHyperGraph and characterizing optimal-super-resolving sets and optimal-super-dominating sets are applied. Some questions and problems are posed concerning ways to do further studies on this topic. Using different ways of study on n-SuperHyperGraph to get new results about closing numbers and super-closing numbers alongside sets in the way that some closing numbers super-closing numbers get understandable perspective. Family of n-SuperHyperGraph are studied to investigate about the notions, super-resolving and super-coloring alongside super-dominating in n-SuperHyperGraph. In this way, sets of representatives of optimal-super-colors, optimal-super-resolving sets and optimal-super-dominating sets have key role. Optimal-super sets and optimal-super numbers have key points to get new results but in some cases, there are usages of sets and numbers instead of optimal-super ones. Simultaneously, three notions are applied into (neutrosophic)n-SuperHyperGraph to get sensible results about their structures. Basic familiarities with n-SuperHyperGraph theory and neutrosophic n-SuperHyperGraph theory are proposed for this article.

In this research, assume a SuperHyperGraph. Then a ``Failed SuperHyperClique'' $\mathcal{C}(NSHG)$ for a neutrosophic SuperHyperGraph $NSHG:(V,E)$ is the maximum cardinality of a SuperHyperSet $S$ of SuperHyperVertices such that there's a SuperHyperVertex to have a SuperHyperEdge in common. Assume a SuperHyperGraph. Then an ``$\delta-$Failed SuperHyperClique'' is a \underline{maximal} Failed SuperHyperClique of SuperHyperVertices with \underline{maximum} cardinality such that either of the following expressions hold for the (neutrosophic) cardinalities of SuperHyperNeighbors of $s\in S:$ $~|S\cap N(s)| > |S\cap (V\setminus N(s))|+\delta,~|S\cap N(s)| < |S\cap (V\setminus N(s))|+\delta.$ The first Expression, holds if $S$ is an ``$\delta-$SuperHyperOffensive''. And the second Expression, holds if $S$ is an ``$\delta-$SuperHyperDefensive''; a``neutrosophic $\delta-$Failed SuperHyperClique'' is a \underline{maximal} neutrosophic Failed SuperHyperClique of SuperHyperVertices with \underline{maximum} neutrosophic cardinality such that either of the following expressions hold for the neutrosophic cardinalities of SuperHyperNeighbors of $s\in S:$ $~|S\cap N(s)|_{neutrosophic} > |S\cap (V\setminus N(s))|_{neutrosophic}+\delta,~ |S\cap N(s)|_{neutrosophic} < |S\cap (V\setminus N(s))|_{neutrosophic}+\delta.$ The first Expression, holds if $S$ is a ``neutrosophic $\delta-$SuperHyperOffensive''. And the second Expression, holds if $S$ is a ``neutrosophic $\delta-$SuperHyperDefensive''. A basic familiarity with Extreme Failed SuperHyperClique theory, Extreme SuperHyperGraphs theory, and Neutrosophic SuperHyperGraphs theory are proposed.

New setting is introduced to study co-neighborhood, neutrosophic t-neighborhood, neutrosophic quasi-vertex set, neutrosophic quasi-order, neutrosophic neighborhood, neutrosophic co-t-neighborhood, neutrosophic quasi-edge set, neutrosophic quasi-size, Neutrosophic number, neutrosophic co-neighborhood, co-neutrosophic number, quasi-number and quasi-co-number. Some classes of neutrosophic graphs are investigated.

New setting is introduced to study failed zero-forcing number and failed zero-forcing neutrosophic-number. Leaf-like is a key term to have these notions. Forcing a vertex to change its color is a type of approach to force that vertex to be zero-like. Forcing a vertex which is only neighbor for zero-like vertex to be zero-like vertex but now reverse approach is on demand which is finding biggest set which doesn’t force. LetNTG : (V,E,σ,μ) be a neutrosophic graph. Then failed zero-forcing number Z(NTG) for a neutrosophic graph NTG : (V,E,σ,μ) is maximal cardinality of a set S of black vertices (whereas vertices in V (G) \ S are colored white) such that V (G) isn’t turned black after finitely many applications of “the color-change rule”: a white vertex is converted to a black vertex if it is the only white neighbor of a black vertex. Failed zero-forcing neutrosophic-number Zn(NTG) for a neutrosophic graphNTG : (V,E,σ,μ) is maximal neutrosophic cardinality of a set S of black vertices (whereas vertices in V (G) \ S are colored white) such that V (G) isn’t turned black afterfinitely many applications of “the color-change rule”: a white vertex is converted to a black vertex if it is the only white neighbor of a black vertex. Failed zero-forcing number and failed zero-forcing neutrosophic-number are about a set of vertices which are applied into the setting of neutrosophic graphs. The structure of set is studied and general results are obtained. Also, some classes of neutrosophic graphs namely path-neutrosophic graphs, cycle-neutrosophic graphs, complete-neutrosophic graphs, star-neutrosophic graphs, bipartite-neutrosophic graphs, and t-partite-neutrosophic graphs are investigated in the terms of maximal set which forms both of failed zero-forcing number and failed zero-forcing neutrosophic-number. Neutrosophic number is reused in this way. It’s applied to use the type of neutrosophic number in the way that, three values of a vertex are used and they’ve same share to construct this number to compare with other vertices. Summation of three values of vertex makes one number and applying it to a comparison. This approach facilitates identifying vertices which form failed zero-forcing number and failed zero-forcing neutrosophic-number. In path-neutrosophic graphs, the set of vertices such that every given two vertices in the set, have distance at least two, forms maximal set but with slightly differences, in cycle-neutrosophic graphs, the set of vertices such that every given two vertices in the set, have distance at least two, forms maximal set. Other classes have same approaches. In complete-neutrosophic graphs, a set of vertices excluding two vertices leads us to failed zero-forcing number and failed zero-forcing neutrosophic-number. In star-neutrosophic graphs, a set of vertices excluding only two vertices and containing center, makes maximal set. In complete-bipartite-neutrosophic graphs, a set of vertices excluding two vertices from same parts makes intended set but with slightly differences, in complete-t-partite-neutrosophic graphs, a set of vertices excluding two vertices from same parts makes intended set. In both settings, some classes of well-known neutrosophic graphs are studied. Some clarifications for each result and each definition are provided. Using basic set not to extend this set to set of all vertices has key role to have these notions in the form of failed zero-forcing number and failed zero-forcing neutrosophic-number. The cardinality of a set has eligibility to form failed zero-forcing number but the neutrosophic cardinality of a set has eligibility to call failed zero-forcing neutrosophic-number. Some results get more frameworks and perspective about these definitions. The way in that, two vertices don’t have unique connection together, opens the way to do some approaches. A vertex could affect on other vertex but there’s no usage of edges. These notions are applied into neutrosophic graphs as individuals but not family of them as drawbacks for these notions. Finding special neutrosophic graphs which are well-known, is an open way to pursue this study. Some problems are proposed to pursue this study. Basic familiarities with graph theory and neutrosophic graph theory are proposed for this article.

New setting is introduced to study the global powerful alliance. Global powerful alliance is about a set of vertices which are applied into the setting of neutrosophic graphs. Neighborhood has the key role to define this notion. Also, neighborhood is defined based on strong edges. Strong edge gets a framework as neighborhood and after that, too close vertices have key role to define global powerful alliance based on strong edges. The structure of set is studied and general results are obtained. Also, some classes of neutrosophic graphs excluding empty, path, star, and wheel and containing complete, cycle and r-regular-strong are investigated in the terms of set, minimal set, number, and neutrosophic number. Neutrosophic number is used in this way. It’s applied to use the type of neutrosophic number in the way that, three values of a vertex are used and they’ve same share to construct this number. It’s called “modified neutrosophic number”. Summation of three values of vertex makes one number and applying it to a set makes neutrosophic number of set. This approach facilitates identifying minimal set and optimal set which forms minimal-global-powerful-alliance number and minimal-global-powerful-alliance-neutrosophic number. Two different types of sets namely global-powerful alliance and minimal-global-powerful alliance are defined. Global-powerful alliance identifies the sets in general vision but minimal-global-powerful alliance takes focus on the sets which deleting a vertex is impossible. Minimal-global-powerful-alliance number is about minimum cardinality amid the cardinalities of all minimal-global-powerful alliances in a given neutrosophic graph. New notions are applied in the settings both individual and family. Family of neutrosophic graphs has an open avenue, in the way that, the family only contains same classes of neutrosophic graphs. The results are about minimal-global-powerful alliance, minimal-global-powerful-alliance number and its corresponded sets, minimal-global-powerful-alliance-neutrosophic number and its corresponded sets, and characterizing all minimal-global-powerful alliances, minimal-t-powerful alliance, minimal-t-powerful-alliance number and its corresponded sets, minimal-t-powerful-alliance-neutrosophic number and its corresponded sets, and characterizing all minimal-t-powerful alliances. The connections amid t-powerful-alliances are obtained. The number of connected components has some relations with this new concept and it gets some results. Some classes of neutrosophic graphs behave differently when the parity of vertices are different and in this case, cycle, and complete illustrate these behaviors. Two applications concerning complete model as individual and family, under the titles of time table and scheduling conclude the results and they give more clarifications and closing remarks. In this study, there’s an open way to extend these results into the family of these classes of neutrosophic graphs. The family of neutrosophic graphs aren’t study deeply and with more results but it seems that analogous results are determined. Slight progress is obtained in the family of these models but there are open avenues to study family of other models as same models and different models. There’s a question. How can be related to each other, two sets partitioning the vertex set of a graph? The ideas of neighborhood and neighbors based on strong edges illustrate open way to get results. A set is global powerful alliance when two sets partitioning vertex set have uniform structure. All members of set have more amount of neighbors in the set than out of set and reversely for non-members of set with less members in the way that the set is simultaneously t-offensive and(t-2)-defensive. A set is global if t=0. It leads us to the notion of global powerful alliance. Different edges make different neighborhoods but it’s used one style edge titled strong edge. These notions are applied into neutrosophic graphs as individuals and family of them. Independent set as an alliance is a special set which has no neighbor inside and it implies some drawbacks for these notions. Finding special sets which are well-known, is an open way to purse this study. Special set which its members have only one neighbor inside, characterize the connected components where the cardinality of its complement is the number of connected components. Some problems are proposed to pursue this study. Basic familiarities with graph theory and neutrosophic graph theory are proposed for this article.

New setting is introduced to study the global offensive alliance. Global offensive alliance is about a set of vertices which are applied into the setting of neutrosophic graphs. Neighborhood has the key role to define this notion. Also, neighborhood is defined based on strong edges. Strong edge gets a framework as neighborhood and after that, too close vertices have key role to define global offensive alliance based on strong edges. The structure of set is studied and general results are obtained. Also, some classes of neutrosophic graphs containing complete, empty, path, cycle, star, and wheel are investigated in the terms of set, minimal set, number, and neutrosophic number. Neutrosophic number is defined in new way. It’s first time to define this type of neutrosophic number in the way that, three values of a vertex are used and they’ve same share to construct this number. It’s called “modified neutrosophic number”. Summation of three values of vertex makes one number and applying it to a set makes neutrosophic number of set. This approach facilitates identifying minimal set and optimal set which forms minimal-global-offensive-alliance number and minimal-global-offensive-alliance-neutrosophic number. Two different types of sets namely global-offensive alliance and minimal-global-offensive alliance are defined. Global-offensive alliance identifies the sets in general vision but minimal-global-offensive alliance takes focus on the sets which deleting a vertex is impossible. Minimal-global-offensive-alliance number is about minimum cardinality amid the cardinalities of all minimal-global-offensive alliances in a given neutrosophic graph. New notions are applied in the settings both individual and family. Family of neutrosophic graphs is studied in the way that, the family only contains same classes of neutrosophic graphs. Three types of family of neutrosophic graphs including m-family of neutrosophic stars with common neutrosophic vertex set, m-family of odd complete graphs with common neutrosophic vertex set, and m-family of odd complete graphs with common neutrosophic vertex set are studied. The results are about minimal-global-offensive alliance, minimal-global-offensive-alliance number and its corresponded sets, minimal-global-offensive-alliance-neutrosophic number and its corresponded sets, and characterizing all minimal-global-offensive alliances. The connection of global-offensive-alliances with dominating set and chromatic number are obtained. The number of connected components has some relations with this new concept and it gets some results. Some classes of neutrosophic graphs behave differently when the parity of vertices are different and in this case, path, cycle, and complete illustrate these behaviors. Two applications concerning complete model as individual and family, under the titles of time table and scheduling conclude the results and they give more clarifications. In this study, there’s an open way to extend these results into the family of these classes of neutrosophic graphs. The family of neutrosophic graphs aren’t study deeply and with more results but it seems that analogous results are determined. Slight progress is obtained in the family of these models but there are open avenues to study family of other models as same models and different models. There’s a question. How can be related to each other, two sets partitioning the vertex set of a graph? The ideas of neighborhood and neighbors based on strong edges illustrate open way to get results. A set is global offensive alliance when two sets partitioning vertex set have uniform structure. All members of set have more amount of neighbors in the set than out of set. It leads us to the notion of global offensive alliance. Different edges make different neighborhoods but it’s used one style edge titled strong edge. These notions are applied into neutrosophic graphs as individuals and family of them. Independent set as an alliance is a special set which has no neighbor inside and it implies some drawbacks for these notions. Finding special sets which are well-known, is an open way to purse this study. Special set which its members have only one neighbor inside, characterize the connected components where the cardinality of its complement is the number of connected components. Some problems are proposed to pursue this study. Basic familiarities with graph theory and neutrosophic graph theory are proposed for this article.

New notion of dimension as set, as two optimal numbers including metric number, dimension number and as optimal set are introduced in individual framework and in formation of family. Behaviors of twin and antipodal are explored in fuzzy(neutrosophic) graphs. Fuzzy(neutrosophic) graphs, under conditions, fixed-edges, fixed-vertex and strong fixed-vertex are studied. Some classes as path, cycle, complete, strong, t-partite, bipartite, star and wheel in the formation of individual case and in the case, they form a family are studied in the term of dimension. Fuzzification(neutrosofication) of twin vertices but using crisp concept of antipodal vertices are another approaches of this study. Thus defining two notions concerning vertices which one of them is fuzzy(neutrosophic) titled twin and another is crisp titled antipodal to study the behaviors of cycles which are partitioned into even and odd, are concluded. Classes of cycles according to antipodal vertices are divided into two classes as even and odd. Parity of the number of edges in cycle causes to have two subsections under the section is entitled to antipodal vertices. In this study, the term dimension is introduced on fuzzy(neutrosophic) graphs. The locations of objects by a set of some junctions which have distinct distance from any couple of objects out of the set, are determined. Thus it’s possible to have the locations of objects outside of this set by assigning partial number to any objects. The classes of these specific graphs are chosen to obtain some results based on dimension. The types of crisp notions and fuzzy(neutrosophic) notions are used to make sense about the material of this study and the outline of this study uses some new notions which are crisp and fuzzy(neutrosophic). Some questions and problems are posed concerning ways to do further studies on this topic. Basic familiarities with fuzzy(neutrosophic) graph theory and graph theory are proposed for this article.

This article presents a new method of segmenting images with gray levels. The method is based on determining several thresholds for separation of gray levels. The determination of these thresholds is done using the certainty of the neutrosophic information. The concept of this method can be stated simply: to choose the local maximums for the neutrosophic certainty.

In this paper, a geometric model is introduced for Neutrosophic data problem for the first time. This model is based on neutrosophic sets and neutrosophic relations. Neutrosophic control points are defined according to these points, resulting in neutrosophic Bézier curves.

New setting is introduced to study resolving number and chromatic number alongside dominating number. Different types of procedures including set, optimal set, and optimal number alongside study on the family of neutrosophic hypergraphs are proposed in this way, some results are obtained. General classes of neutrosophic hypergraphs are used to obtains these numbers and the representatives of the colors, dominating sets and resolving sets. Using colors to assign to the vertices of neutrosophic hypergraphs and characterizing resolving sets and dominating sets are applied. Some questions and problems are posed concerning ways to do further studies on this topic. Using different ways of study on neutrosophic hypergraphs to get new results about numbers and sets in the way that some numbers get understandable perspective. Family of neutrosophic hypergraphs are studied to investigate about the notions, dimension and coloring alongside domination in neutrosophic hypergraphs. In this way, sets of representatives of colors, resolving sets and dominating sets have key role. Optimal sets and optimal numbers have key points to get new results but in some cases, there are usages of sets and numbers instead of optimal ones. Simultaneously, three notions are applied into neutrosophic hypergraphs to get sensible results about their structures. Basic familiarities with neutrosophic hypergraphs theory and hypergraph theory are proposed for this article.

This article presents a new method of segmenting grayscale images by minimizing Shannon's neutrosophic entropy. For the proposed segmentation method, the neutrosophic information components, i.e., the degree of truth, the degree of neutrality and the degree of falsity are defined taking into account the belonging to the segmented regions and at the same time to the separation threshold area. The principle of the method is simple and easy to understand and can lead to multiple thresholds. The efficacy of the method is illustrated using some test gray level images. The experimental results show that the proposed method has good performance for segmentation with optimal gray level thresholds.

New setting is introduced to study types of coloring numbers, degree of vertices, degree of hyperedges, co-degree of vertices, co-degree of hyperedges, neutrosophic degree of vertices, neutrosophic degree of hyperedges, neutrosophic co-degree of vertices, neutrosophic co-degree of hyperedges, neutrosophic number of vertices, neutrosophic number of hyperedges in neutrosophic hypergraphs. Different types of procedures including neutrosophic (r, n)−regular hypergraphs and neutrosophic complete r−partite hypergraphs are proposed in this way, some results are obtained. General classes of neutrosophic hypergraphs are used to obtain chromatic number, the representatives of the colors, degree of vertices, degree of hyperedges, co-degree of vertices, co-degree of hyperedges, neutrosophic degree of vertices, neutrosophic degree of hyperedges, neutrosophic co-degree of vertices, neutrosophic co-degree of hyperedges, neutrosophic number of vertices, neutrosophic number of hyperedges in neutrosophic hypergraphs. Using colors to assign to the vertices of neutrosophic hypergraphs and characterizing representatives of the colors are applied in neutrosophic (r, n)−regular hypergraphs and neutrosophic complete r−partite hypergraphs. Some questions and problems are posed concerning ways to do further studies on this topic. Using different ways of study on neutrosophic hypergraphs to get new results about number, degree and co-degree in the way that some number, degree and co-degree get understandable perspective. Neutrosophic (r, n)−regular hypergraphs and neutrosophic complete r−partite hypergraphs are studied to investigate about the notions, coloring, the representatives of the colors, degree of vertices, degree of hyperedges, co-degree of vertices, co-degree of hyperedges, neutrosophic degree of vertices, neutrosophic degree of hyperedges, neutrosophic co-degree of vertices, neutrosophic co-degree of hyperedges, neutrosophic number of vertices, neutrosophic number of hyperedges in neutrosophic (r, n)−regular hypergraphs and neutrosophic complete r−partite hypergraphs. In this way, sets of representatives of colors, degree of vertices, degree of hyperedges, co-degree of vertices, co-degree of hyperedges, neutrosophic degree of vertices, neutrosophic degree of hyperedges, neutrosophic co-degree of vertices, neutrosophic co-degree of hyperedges, neutrosophic number of vertices, neutrosophic number of hyperedges have key points to get new results but in some cases, there are usages of sets and numbers instead of optimal ones. Simultaneously, notions chromatic number, the representatives of the colors, degree of vertices, degree of hyperedges, co-degree of vertices, co-degree of hyperedges, neutrosophic degree of vertices, neutrosophic degree of hyperedges, neutrosophic co-degree of vertices, neutrosophic co-degree of hyperedges, neutrosophic number of vertices, neutrosophic number of hyperedges are applied into neutrosophic hypergraphs, especially, neutrosophic (r, n)−regular hypergraphs and neutrosophic complete r−partite hypergraphs to get sensible results about their structures. Basic familiarities with neutrosophic hypergraphs theory and hypergraph theory are proposed for this article.

Neutrosophic cubic set is the hybridization of the concept of neutrosophic set and interval neutrosophic set. Neutrosophic cubic set has the capacity to express the hybrid information of both the interval neutrosophic set and the single valued neutrosophic set simultaneously. As newly defined, little research on the operations and applications of neutrosophic cubic sets appear in the current literature. In the present paper we propose the score, accuracy functions for neutrosophic cubic sets and prove their basic properties. We firstly develop TODIM method to solve multi attribute group decision making in neutrosophic cubic set environment, which we call NC-TODIM. Also, we solve a MAGDM problem using the proposed NC-TODIM method to show the applicability and effectiveness of the developed method. We also conduct sensitivity analysis to show the impact of ranking order of the alternatives for different values of attenuation factor of losses for multi-attribute group decision making problem.

New setting is introduced to study the alliances. Alliances are about a set of vertices which are applied into the setting of neutrosophic graphs. Neighborhood has the key role to define these notions. Also, neighborhood is defined based on the edges, strong edges and some edges which are coming from connectedness. These three types of edges get a framework as neighborhood and after that, too close vertices have key role to define offensive alliance, defensive alliance, t-offensive alliance, and t-defensive alliance based on three types of edges, common edges, strong edges and some edges which are coming from connectedness. The structure of set is studied and general results are obtained. Also, some classes of neutrosophic graphs containing complete, empty, path, cycle, bipartite, t-partite, star and wheel are investigated in the terms of set, minimal set, number, and neutrosophic number. In this study, there’s an open way to extend these results into the family of these classes of neutrosophic graphs. The family of neutrosophic graphs aren’t study but it seems that analogous results are determined. There’s a question. How can be related to each other, two sets partitioning the vertex set of a graph? The ideas of neighborhood and neighbors based on different edges illustrate open way to get results. A set is alliance when two sets partitioning vertex set have uniform structure. All members of set have different amount of neighbors in the set and out of set. It leads us to the notion of offensive and defensive. New ideas, offensive alliance, defensive alliance, t-offensive alliance, t-defensive alliance, strong offensive alliance, strong defensive alliance, strong t-offensive alliance, strong t-defensive alliance, connected offensive alliance, connected defensive alliance, connected t-offensive alliance, and connected t-defensive alliance are introduced. Two numbers concerning cardinality and neutrosophic cardinality of alliances are introduced. A set is alliance when its complement make a relation in the terms of neighborhood. Different edges make different neighborhoods. Three types of edges are applied to define three styles of neighborhoods. General edges, strong edges and connected edges are used where connected edges are the edges arising from connectedness amid two endpoints of the edges. These notions are applied into neutrosophic graphs as individuals and family of them. Independent set as an alliance is a special set which has no neighbor inside and it implies some drawbacks for this notions. Finding special sets which are well-known, is an open way to purse this study. Special set which its members have only one neighbor inside, characterize the connected components where the cardinality of its complement is the number of connected components. Some problems are proposed to pursue this study. Basic familiarities with graph theory and neutrosophic graph theory are proposed for this article.

Neutrosophic cubic set (NCS) is one of the important family members of neutrosophic hybrid sets. Neutrosophic cubic set has more strength than other family members of neutrosophic hybrid sets to express incomplete information due to the presence of interval valued neutrosophic set (IVNS) and single valued neutrosophic set (SVNS) in its structure. Cross entropy measure is one of the best way to calculate the divergence of any variable from the priori one variable. In this paper we first define a new cross entropy measure under NCSs environment which we call NC- cross entropy measure. We investigate the basic properties of NC-cross entropy. We also propose weighted NC-cross entropy and investigate its basic properties. We develop a novel multi attribute decision making (MADM) strategy based on weighted NC-cross entropy. To show the feasibility and applicability, we solve a MADM problem using the proposed strategy.

Single valued neutrosophic set has king power to express uncertainty characterized by indeterminacy, inconsistency and incompleteness. Most of the existing single valued neutrosophic cross entropy bears an asymmetrical behavior and produce an undefined phenomenon in some situations. In order to deal with these disadvantages, we propose a new cross entropy measure under single valued neutrosophic set (SVNS) environment namely SN- cross entropy and prove its basic properties. Also we define weighted SN-cross entropy measure and investigate its basic properties. We develop a new multi attribute group decision making (MAGDM) strategy for ranking of the alternatives based on the proposed weighted SN-cross entropy measure between each alternative and the ideal alternative. Finally, a numerical example of MAGDM problem of investment potential is solved to show the validity and efficiency of proposed decision making strategy. We also present comparative anslysis of the obtained result with the results obtained form the existing solution strategies in the solution.

The concept of neutrosophic number is a significant mathematical tool to deal with real scientific problems because it can tackle indeterminate and incomplete information which exists generally in real problems. In this article, we use neutrosophic numbers (a + bI), where a and bI denote determinate component and indeterminate component respectively. We explore the situations in which the input information is needed to express in terms of neutrosophic numbers. We define score functions and accuracy functions for ranking neutrosophic numbers. We then define a cosine function to determine unknown criteria weights. We define neutrosophic number harmonic mean operators and proved their basic properties. Then, we develop two novel MCGDM strategies using the proposed aggregation operators. We solve a numerical example to demonstrate the feasibility and effectiveness of the proposed two strategies. Sensitivity analysis with variation of “I” on neutrosophic numbers is performed to demonstrate how the preference ranking order of alternatives is sensitive to the change of “I”. The efficiency of the developed strategies is ascertained by comparing the obtained results from the proposed strategies with the existing strategies in the literature.

The paper investigates some similarity measures in interval bipolar neutrosophic environment for multi-attribute decision making problems. At first, we define Hamming and Euclidean distances measures between interval bipolar neutrosophic sets and establish their basic properties. We also propose two similarity measures based on the Hamming and Euclidean distance functions. Using maximum and minimum operators, we define new similarity measures and prove their basic properties. Using the proposed similarity measures, we propose a novel multi attribute decision making strategy in interval bipolar neutrosophic set environment. Lastly, we solve an illustrative example of multi attribute decision making and present comparison analysis to show the feasibility, applicability and effectiveness of the proposed strategy.

In this research, new setting is introduced for new notions, namely, SuperHyperDegree and Co-SuperHyperDegree. Two different types of definitions are debut for them but the research goes further and the SuperHyperNotion, SuperHyperUniform, and SuperHyperClass based on that are well-defined and well-reviewed. The literature review is implemented in the whole of this research. For shining the elegancy and the significancy of this research, the comparison between this SuperHyperNotion with other SuperHyperNotions and fundamental SuperHyperNumbers are featured. The definitions are followed by the examples and the instances thus the clarifications are driven with different tools. The applications are figured out to make sense about the theoretical aspect of this ongoing research. The cancer’s treatments are the under research to figure out the challenges make sense about ongoing and upcoming research. The special case is up. The cells are viewed in the deemed ways. There are different types of them. Some of them are individuals and some of them are well-modeled by the group of cells. These types are all officially called “SuperHyperVertex” but the relations amid them all officially called “SuperHyperEdge”. The frameworks “SuperHyperGraph” and “neutrosophic SuperHyperGraph” are chosen and elected to research about “cancer’s treatments”. Thus these complex and dense SuperHyperModels open up some avenues to research on theoretical segments and “cancer’s treatments”. Some avenues are posed to pursue this research. It’s also officially collected in the form of some questions and some problems. If there’s a SuperHyperEdge between two SuperHyperVertices, then these two SuperHyperVertices are called SuperHyperNeighbors. The number of SuperHyperNeighbors for a given SuperHyperVertex is called SuperHyperDegree. The number of common SuperHyperNeighbors for some SuperHyperVertices is called Co-SuperHyperDegree for them and used SuperHyperVertices are called Co-SuperHyperNeighbors. A graph is SuperHyperUniform if it’s SuperHyperGraph and the number of elements of SuperHyperEdges are the same. Assume a neutrosophic SuperHyperGraph. There are some SuperHyperClasses as follows. It’s SuperHyperPath if it’s only one SuperVertex as intersection amid two given SuperHyperEdges with two exceptions; it’s SuperHyperCycle if it’s only one SuperVertex as intersection amid two given SuperHyperEdges; it’s SuperHyperStar it’s only one SuperVertex as intersection amid all SuperHyperEdges; it’s SuperHyperBipartite it’s only one SuperVertex as intersection amid two given SuperHyperEdges and these SuperVertices, forming two separate sets, has no SuperHyperEdge in common; it’s SuperHyperMultiPartite it’s only one SuperVertex as intersection amid two given SuperHyperEdges and these SuperVertices, forming multi separate sets, has no SuperHyperEdge in common; it’s SuperHyperWheel if it’s only one SuperVertex as intersection amid two given SuperHyperEdges and one SuperVertex has one SuperHyperEdge with any common SuperVertex. The number of SuperHyperEdges for a given SuperHyperVertex is called SuperHyperDegree. The number of common SuperHyperEdges for some SuperHyperVertices is called Co-SuperHyperDegree for them. The number of SuperHyperVertices for a given SuperHyperEdge is called SuperHyperDegree. The number of common SuperHyperVertices for some SuperHyperEdges is called Co-SuperHyperDegree for them. The model proposes the specific designs. The model is officially called “SuperHyperGraph” and “Neutrosophic SuperHyperGraph”. In this model, The “specific” cells and “specific group” of cells are modeled as “SuperHyperVertices” and the common and intended properties between “specific” cells and “specific group” of cells are modeled as “SuperHyperEdges”. Sometimes, it’s useful to have some degrees of determinacy, indeterminacy, and neutrality to have more precise model which in this case the model is called “neutrosophic”. In the future research, the foundation will be based on the caner’s treatment and the results and the definitions will be introduced in redeemed ways. A basic familiarity with SuperHyperGraph theory and neutrosophic SuperHyperGraph theory are proposed.

Bipolar neutrosophic set is an important extension of bipolar fuzzy set. This set is a hybridization of bipolar fuzzy set and neutrosophic set. Every element of a bipolar neutrosophic set consists of three independent positive membership functions and three independent negative membership functions. In this paper, we develop cross entropy measures of bipolar neutrosophic sets and prove its properties. We also define cross entropy measures of interval bipolar neutrosophic sets and prove its properties. Thereafter, we develop two novel multi-attribute decision making methods based on the proposed cross entropy measures. In the decision making framework, we calculate the weighted cross entropy measures between each alternative and the ideal alternative to rank the alternatives and choose the best one. We solve two illustrative examples of multi-attribute decision making problems and compare the obtained result with the results of other existing methods to show the applicability and effectiveness of the developed method. In the end, the main conclusion and future scope of research are summarized.

Along with the economic growth, the companies must contribute to social progress and promote environmental sustainability in equal harmony. Sustainable human resource management (SHRM) strategies make it possible to attain the economic, social and environmental goals of a firm. In this regard, a survey method is discussed using the literature review and online questionnaire to identify the main factors/indicators during the SHRM evaluation of manufacturing firms in India. Uncertainty is commonly occurred in the assessment of SHRM factors. As a generalized version of fuzzy sets, single-valued neutrosophic set (SVNS) has been demonstrated as a valuable tool to illustrate the indeterminate, inconsistent and uncertain data of realistic decision-making problems. Considering the idea of SVNSs, this study develops a hybrid multi-criteria group decision-making (MCGDM) approach for assessing the SHRM of manufacturing firms under uncertainty settings. For this purpose, an SVN-alternative ranking order method accounting for two-step normalization (AROMAN) is proposed based on VIFI-score function-based decision experts’ (DEs’) weighting tool and integrated criteria weight-determining model to solve the MCGDM problems with fully unknown DEs and criteria weights. In this regard, we develop new SVN-distance measure to compute the degree of difference between SVNSs. Some examples are presented to demonstrate the efficacy of developed measure over the existing ones. In addition, new criteria weight-determination model is presented with the integration of objective weights through IVIF-distance measure-based model and subjective weights through ranking comparison (RANCOM) tool on SVNSs. The proposed ranking method is applied to an empirical study of SHRM assessment for manufacturing firms in India, which shows its applicability and feasibility. In this study, the evaluation criteria are characterized into social, environmental and economic aspects with DE’s opinions. Comparative and sensitivity analyses are made to show the strength and steadiness of presented approach. This study provides an innovative MCGDM analysis framework, which makes a significant contribution to the SHRM assessment problem under indeterminate, inconsistent and uncertain setting.

A single water pollution by dyes is a huge environmental problem; there is a necessity to produce new decolorization methods that are effective, cost-attractive, and suitable in industrial use. Magnetic chitosan polymers offer the advantage of easy separation from the dye solution. In this work, a Chitosan-Fe polymer was synthesized, characterized, and tested for removal of the azo dye Direct Red 83:1 from water. The polymer was characterized in terms of surface morphology (SEM), elemental analysis (EA), differential scanning calorimetry (DSC), thermal gravimetric analysis (TGA), infrared spectrophotometry (IR), X-ray powder diffraction (XRD) and density functional theory (DFT). The reported results hint that 1 g and pH 7.0 were the best conditions to carry out both kinetic and isotherm models. To understand the adsorption behavior of Direct Red 83:1 onto the polymers, adsorption rate and maximum adsorption capacity were calculated using kinetic tests and isotherm curves respectively. The kinetic data and mechanism of the adsorption process were analyzed by three models and the equilibrium data by three adsorption isotherms. The results indicated that the adsorption process follows a pseudo-second-order kinetics (R2= 0.999) and fits the Temkin isotherm (R2= 0.946), indicating that the adsorption occurred on heterogeneous surfaces. The newly synthesized Chitosan-Fe polymer exhibited good adsorption properties and easy separation of cleaned water.

The key links of face recognition are digital image preprocessing, facial feature extraction and pattern recognition, this article aimed at the current problem of slow speed and low recognition accuracy of face recognition , from the above three key links, on the basic of analyzing the therories of Fractional Differential Masks Operator (FDMO), Principal Component Analysis (PCA) and Support Vector Machine (SVM), design a kind of FDMO+PVA+SVM coupling algorithm that applies to face recognition to improve the speed and accuracy of it. To realize FDMO+PCA+SVM coupling algorithm, first, we should apply FDMO to face image processing binary marginalization, the purpose is getting face contour; Then, we apply PCA to get the feature of face image which is disposed by binary marainalization. At last, we can apply One-Against All of the SVM classifier and LibSVM software package to realize face recognition. Beside, the article with nine different coupling algorithm design four groups of experimental reaults on the ORL face database verified by comparative analysic FDMO+PCA+SVM coupling algorithm in the superiority of face recognition accuracy and speed.

The electroencephalogram (EEG) is a record of brain activity. Brain Computer Interface (BCI) technology formed by the EEG signal has become one of the hotspots at present. How to extract the feature signal of EEG is the most basic research of BCI technology. In this paper, A new method of recognizing fatigue, conscious, concentrated state of human brain is proposed by the combination of discrete wavelet transform and the neural network based on EEG signal. First of all, the law signal is preprocessed by the wavelet denoising method because the law EEG signal contains a large number of high frequency noise, which is decomposed into multi-layer high frequency signal and low frequency signal. thus, δ wave, θ wave, α wave, β wave are obtained by the wavelet transform. And then, frequency band energy of the different wave is regards as the feature signal of EEG. In the experiment, the feature signal is classified by radial basic function (RBF) and annealed chaotic competitive learning network (ACCLN). RBF and ACCLN networks are trained with 500 sets of sample data and are tested by 100 sets of samples in different mental states. The experimental results show that the average accuracy of RBF network under three conditions are 88.75%, 88.25%, 88.5%, respectively, and the correct rate of ACCLN network is 97%, 98%, 98%, respectively.

Optical coherence tomography (OCT) is a non-invasive imaging technique widely used in ophthalmology for visualizing retinal layers, aiding in early detection and monitoring of retinal diseases. OCT is useful for detecting diseases such as age-related macular degeneration (AMD) and diabetic macular edema (DME), which affect millions of people globally. Over the past decade, the area of application of Artificial Intelligence (AI), particularly Deep Learning (DL), has significantly increased. The number of medical applications is also rising, with solutions from other domains being increasingly applied to OCT. The segmentation of biomarkers is an essential problem that can enhance the quality of retinal disease diagnostics. For 3D OCT scans, AI is beneficial since manual segmentation is very labor-intensive. In this paper, we employ the new SAM 2 and MedSAM 2 for the segmentation of OCT volumes for two open-source datasets, comparing their performance with the traditional U-Net. The model achieved an overall Dice score of 0.913 and 0.902 for macular holes (MH) and intraretinal cysts (IRC) on OIMHS and 0.888 and 0.909 for intraretinal fluid (IRF) and pigment epithelial detachment (PED) on the AROI dataset, respectively.

Motion related human activity recognition using wearable sensors can potentially enable various useful daily applications. So far, most studies view it as a stand-alone mathematical classification problem without considering the physical nature of human motions. Consequently, they suffer from data dependencies and encounter the dimension disaster problem and the over-fitting issue, and their models are never human-readable. In this study, we start from a deep analysis on natural physical properties of human motions, and then propose a useful feature selection method to quantify each feature's classification contribution capability. On one hand, the "dimension disaster" problem can be avoid to some extent, due to the affined dimension of key features; On the other hand, over-fitting issue can be depressed since the knowledge implied in human motions are nearly invariant, which compensates the possible data inadequacy. The experiment results indicate that the proposed method performs superior to those adopted in related works, such as decision tree, k-NN, SVM, neural networks.

Determining the general-name-derived semantic relationships between geographic names often requires consulting many geographic name documents for verification. In geographic name translation and geographic name knowledge graphs, this method cannot meet the needs of large-scale extraction of general-name-derived semantic relationships between geographic entities. To solve this problem, this paper proposes a general-name derivation relation recognition method based on Prompt learning and Semantic Spatiotemporal Distribution Attention Feature Fusion (SSD-AFF). This method adopts a pipe-based relationship recognition strategy. First, the Prompt learning method is adopted to form a general-name derivation pattern with the general-name-derived geographical name category and the original geographical name category as the prompt word, and then the derivation pattern is combined with the geographical name as the input of the model so that the recognition problem of the general-name derivation of the geographical name can be transformed into a classification problem using the bidirectional language model. Then, by analyzing the characteristics of the semantic association and geographical spatio-temporal distribution between the general-name-derived geographical name and the original geographical name, the semantic spatio-temporal distribution characteristics of the general-name-derived geographical name are constructed. Finally, the network model based on the semantic spatio-temporal distribution Attention Feature Fusion (SSD-AFF) is used to distinguish the general-name-derived semantic relationships. The experimental results show that the proposed method has good performance. It can effectively mine the general-name-derived semantic relations between the vector data of geographical entities and has important application value in geographical name translation and geographical name knowledge maps.

In this comprehensive review, we delve into the realm of intention recognition within the context of digital forensics and cybercrime. The rise of cybercrime has become a major concern for individuals, organizations, and governments worldwide. Digital forensics is a field that deals with the investigation and analysis of digital evidence in order to identify, preserve, and analyze information that can be used as evidence in a court of law. Whereas, Intention recognition is a subfield of artificial intelligence that deals with the identification of agents’ intentions based on their actions and change of states. In the context of cybercrime, intention recognition can be used to identify the intentions of cybercriminals and even to predict their future actions. Employing a meticulous six-step systematic review approach, we curated research articles from reputable journals and categorized them into three distinct modeling approaches: logic-based, classical machine learning-based, and deep learning-based. Notably, intention recognition has transcended its historical confinement to network security, now addressing critical challenges across various subdomains, including social engineering attacks, AI black box vulnerabilities, and physical security. While deep learning emerges as the dominant paradigm, its inherent lack of transparency poses unique challenges in the digital forensics landscape. We advocate for hybrid solutions that blend deep learning’s power with interpretability. Furthermore, we propose the creation of a comprehensive taxonomy to precisely define intention recognition, paving the way for future advancements in this pivotal field.

In pattern recognition domain, deep architectures are widely used nowadays and they have achieved fine grades. However, these deep architectures need special demands, especially big datasets and GPU. Aiming to gain better grades without deep networks, we propose a simplified algorithm framework using fusion features extracted from the salient areas of faces. Furthermore, the proposed algorithm has achieved a better result than some deep architectures. For extracting more effective features, this paper firstly defines the salient areas on the faces. This paper normalizes the salient areas of the same location in the faces to the same size, therefore it can gain more similar features from different subjects. LBP and HOG features are extracted from the salient areas, fusion features’ dimensions are reduced by Principal Component Analysis( PCA) and we apply softmax to classify the six basic expressions at once. This paper proposes a salient areas definitude method which uses peak expressions frames to compare with their neutral faces. This paper also proposes and applies the idea of normalizing the salient areas to align the specific areas which express the different expressions. This makes the salient areas found from different subjects have the same size. Besides, gamma correction method is firstly applied on LBP features in our algorithm framework which improves our recognition rates significantly. By applying this algorithm framework, our research has gained state-of-the-art performances on CK+ database and JAFFE database.

Crowd abnormal behavior recognition is one of the research hotspots in computer vision. Its goal is to use computer vision technology and abnormal behavior detection models to accurately perceive, predict, and intervene in potential abnormal behaviors of the crowd, and monitor the status of the crowd system in public places in real-time, to effectively prevent and deal with public security risks and ensure public life safety and social order. To this end, focusing on the crowd abnormal behavior recognition technology in the computer vision system, a systematic review study of its theory and cutting-edge technology is conducted. First, the crowd level and abnormal behaviors in public places are defined, and the challenges faced by crowd abnormal behavior recognition are expounded. Then, from the dimensions based on traditional methods and based on deep learning, the mainstream technologies of abnormal behavior recognition are discussed, and the design ideas, advantages, and limitations of various methods are analyzed. Next, the mainstream software tools are introduced to provide a comprehensive reference for the technical framework; Secondly, typical abnormal behavior datasets at home and abroad are sorted out, and the characteristics of these datasets are compared in detail from multiple perspectives such as scale, characteristics and uses, and the performance indicators of different algorithms on the datasets are compared and analyzed; Finally, the full text is summarized and the future development direction of crowd abnormal behavior recognition technology is prospected.

Prompt removal of misfolded membrane proteins and misassembled membrane protein complexes is essential for membrane homeostasis. However, the elimination of these toxic proteins from the hydrophobic membrane environment has high energetic barriers. Transmembrane FtsH is the only known ATP-dependent protease responsible for this task, unlike other well-studied soluble ATP-dependent proteases. The mechanisms by which FtsH recognizes, unfolds, translocates, and proteolyzes its substrates remain unclear. Here, we report the crystal structures of the Thermotoga maritima FtsH periplasmic domain (PD) in an associative trimeric state at a 1.5-1.95 Å resolution. We also describe the pH-dependent oligomerization states of the isolated PD using dynamic light scattering. These observations help us understand how FtsH recognizes membrane-anchored misfolded proteins.

In this paper, we proposed the fusion of two projection based face recognition algorithms: local binary Patterns in DCT domain and singular value decomposition (SVD) characterized by its simplicity and efficiently. Standard databases ORL are used to test the experimental results which prove that proposed system achieves more accurate face recognition as compared to individual method.

This paper describes the first results of an Image Recognition Based Location (IRBL) for mobile application focusing on the procedure to generate a Database of range images (RGB-D). In an indoor environment, to estimate the camera position and orientation, a prior spatial knowledge of the surrounding is needed. In order to achieve this objective a complete 3D survey of two different environment (Bangbae metro station of Seoul and E.T.R.I. building in Daejeon – Republic of Korea) was performed using LiDAR (Light Detection And Ranging) instrument and the obtained scans were processed in order to obtain a spatial model of the environments. From this, two databases of reference images were generated using a specific software realized by the Geomatics group of Politecnico di Torino (ScanToRGBDImage). This tool allow to generate synthetically different RGB-D images) centered in the each scan position in the environment. Later, the external parameters (X, Y, Z, ω, φ, κ) and the range information extracted from the DB images retrieved, are used as reference information for pose estimation of a set of acquired mobile pictures in the IRBL procedure. In this paper the survey operations, the approach for generating the RGB-D images and the IRB strategy are reported. Finally the analysis of the results and the validation test are described.

This research introduces a hybrid feature extraction approach that combines Linear Discriminant Analysis (LDA) and Multilayer Perceptron (MLP) methods to address the challenges of reducing feature vector dimensionality and accurately classifying smartphone-based human activities. Moreover, to refine activity classification accuracy, Support Vector Machine (SVM) optimization with Stochastic Gradient Descent (SGD) is employed. LDA, a statistical tool, is leveraged to derive a new feature space for data projection, enhancing class separation and test feature label prediction. The proposed approach, named LMSS, was evaluated using the UCI-HAR dataset and compared with state-of-the-art models. The results demonstrate that the proposed approach outperformed the best-performing method over this dataset. It achieved an accuracy rate of 99.52%, precision of 99.55%, recall of 99.53%, and an F1-score of 99.54%, highlighting the effectiveness of the proposed method in accurately classifying the data.

Musical instrument recognition is a relatively unexplored area of machine learning due to the need to analyze complex spatial-temporal audio features. Traditional methods using individual spectrograms, like STFT, Log-Mel, and MFCC, often miss the full range of features. We propose a hierarchical residual attention network using a scaled combination of multiple spectrograms, including STFT, Log-Mel, MFCC, and CST features (chroma, spectral contrast, and Tonnetz), to create a comprehensive sound representation. This model enhances focus on relevant spectrogram parts through attention mechanisms. Experimental results with the OpenMIC-2018 dataset show significant improvement in classification accuracy, especially with the "Magnified 1/4 Size" configuration. Future work will optimize CST feature scaling, explore advanced attention mechanisms, and apply the model to other audio tasks to assess its generalizability.

In recent years, electroencephalogram (EEG) emotion recognition has emerged as a research hotspot in the field of artificial intelligence (AI). Despite advancements in EEG-based emotion recognition, room for enhancing performance persists due to EEG signal redundancy and limitations in feature extraction, leading to inefficient models and emotional information loss. To fully utilize EEG's emotional information and improve recognition accuracy while reducing computational costs, this paper proposes a Convolutional-Recurrent Hybrid Network with a dual-stream adaptive approach and an attention mechanism (CSA-SA-CRTNN). Firstly, the model utilizes a CSAM module to assign corresponding weights to EEG channels. Then, an adaptive dual-stream convolutional-recurrent network (SA-CRNN and MHSA-CRNN) is applied to extract local spatial-temporal features. After that, the extracted local features are concatenated and fed into a temporal convolutional network with a multi-head self-attention mechanism (MHSA-TCN) to capture global information. Finally, the extracted EEG information is used for emotion classification. We conducted binary and ternary classification experiments on the DEAP dataset, achieving 99.26% and 99.15% accuracy for arousal and valence in binary classification, and 97.69% and 98.05% in ternary classification, surpassing relevant algorithms. Additionally, the model's efficiency is significantly higher than other models, achieving better accuracy with lower resource consumption.

With the development of educational technology, machine learning and deep learning provide technical support for traditional classroom observation assessment. However, in real classroom scenarios, the technique faces challenges such as lack of clarity of raw images, complexity of datasets, multi-target detection errors and complexity of character interactions.Based on the above problems, a student classroom behavior recognition network incorporating super-resolution and target detection is proposed. To cope with the problem of unclear original images in the classroom scenario, SRGAN (Super Resolution Generative Adversarial Network for Images) is used to improve the image resolution and thus the recognition accuracy.To address the dataset complexity and multi-targeting problems, feature extraction is optimized and multi-scale feature recognition is enhanced by introducing AKConv and LASK attention mechanisms into the Backbone module of YOLOv8s algorithm. To improve the character interaction complexity problem, the CBAM attention mechanism is integrated to enhance the recognition of important feature channels and spatial regions. Experiments show that it can detect six behaviors of students raising their hands, reading, writing, playing cell phones, looking down, and lying on the table in high-definition images. And the accuracy and robustness of this network are verified.Compared with small target detection algorithms such as Faster R-CNN, YOLOv5, and YOLOv8s, this network has better detection performance and can efficiently deal with the behavior recognition of multiple students.

Train fault detection primarily relies on the comparative analysis of collected images with standard reference images, making the accurate identification of the collected image types crucial for effective fault detection. Most current systems achieve indirect classification of carriage images by using Automatic Equipment Identification (AEI) devices to recognize carriage identification number information while capturing the carriage images. However, damaged RF tags or blurred characters can hinder these devices, obstructing further train fault analyses. The unique features of carriage linear array images, such as high resolution, extreme aspect ratios, and local non-linear distortions, pose significant challenges to recognition algorithms. This paper proposes a method specifically designed to recognize these types of images. First, we implement an object detection algorithm to locate the positions of key components in carriage linear array images. By leveraging the spatial layout mapping between these key components and the carriage type classification, we simplify the complex image recognition problem into a sparse point set alignment task. To ensure effective registration despite local distortions in the linear array images, we propose a weighted radial basis function. To address the issues of unknown matching relationships and quantity mismatches during point set alignment, the proposed objective function is designed to maximize the similarity between Gaussian mixtures of point sets, thereby determining the RBF weights. Extensive experiments have demonstrated that our algorithm achieves 100% recognition accuracy under local nonlinear scale distortions of less than 15%. The algorithm remains effective even in the presence of some false positives or missed detections in key component object detection results. It can accurately identify the target category from 79 image categories within 24 milliseconds on an i7 CPU without GPU support. It is of great significance to reduce system cost and promote automatic exterior fault detection for train rolling stock.

Human Activity Recognition (HAR) technology enables continuous behavior monitoring, particularly valuable in healthcare. This study investigates the viability of using an ear-worn motion sensor for classifying daily activities, including lying, sitting/standing, walking, ascending stairs, descending stairs, and running. Fifty healthy participants (between 20 and 47 years old) engaged in these activities while under monitoring. Various machine learning algorithms, ranging from interpretable shallow models to state-of-the-art deep learning approaches designed for HAR, were employed for classification. Results demonstrate the ear sensor's efficacy, with deep learning models achieving 98% accuracy rate of classification. The obtained classification models are agnostic regarding which ear the sensor is worn and robust against moderate variations in sensor orientation (e.g., due to differences in auricle anatomy), meaning no initial calibration of the sensor orientation is required. The study underscores the ear's efficacy as a suitable site for monitoring human daily activity and suggests its potential for combining HAR with in-ear vital signs monitoring. This approach offers a practical method for comprehensive health monitoring by integrating sensors in a single anatomical location. This integration facilitates individualized health assessments, with potential applications in tele-monitoring, personalized health insights, and optimizing athletic training regimes.

Over the past decades, overweight and obesity has become a global epidemic and the leading threat for death. To prevent the serious risk, an overweight or obese individual must apply a long-term weight-management strategy to control food intake and physical activities, which is however, not easy. Recently, with the advances of information technology, more and more people can use wearable devices and smartphones to obtain physical activity information, while they can also access various health-related information from Internet online social networks (OSNs). Nevertheless, there is a lack of an integrated approach that can combine these two methods in an efficient way. In this paper, we address this issue and propose a novel mobile-social framework for health recognition and recommendation, namely, H-Rec². The main ideas of H-Rec² include (1) to recognize the individual's health status using smartphone as a general platform, and (2) to recommend physical activity and food intake based on personal health information, life science principles, and health-related information obtained from OSNs. To demonstrate the potentials of the H-Rec² framework, we develop a prototype that consists of four important components: (1) an activity recognition module that senses physical activity using accelerometer, (2) a health status modeling module that applies a novel algorithm to generate personalized health status index, (3) a restaurant information collection module that collects relevant information from OSN, and (4) a restaurant recommendation module that provides personalized and context-aware recommendation. To evaluate the prototype, we conduct both objective and subjective experiments, which confirm the performance and effectiveness of the proposed system.

Background: Microscopic examination of acid-fast stained sputum smears for detecting mycobacterial acid-fast bacilli (AFB) remains the most economical and readily available method for laboratory diagnosis of tuberculosis (TB). However, this conventional approach has limitations, including low sensitivity and labor-intensive procedures. Methods: An automated microscopy system incorporating artificial intelligence (AI) and machine learning for AFB identification was evaluated. The study was conducted at an Infectious Disease Hospital in Jiangsu Province, China, utilizing an intelligent microscope system (TB-Scan, Wellgen Medical, Kaohsiung). A total of 1,000 sputum smears were included in the analysis, with the system capturing digital microscopic images and employing an image recognition model to automatically identify and classify AFB. Referee technicians provided the gold standard for discrepant results. Results: The automated system demonstrated an overall accuracy of 95.00% (950/1,000), sensitivity of 91.24% (177/194), and specificity of 95.91% (773/806). Notably, the system identified 21 smears as positive that were previously reported as negative, with referee technicians confirming 17 of these as true positive and retracting the test results accordingly. Recalculating the performance, the accuracy increased to 96.70% (967/1,000), sensitivity to 91.94% (194/211), and specificity to 97.97% (773/789), with a false negative rate of 8.06% (17/211) and a false positive rate of 2.03% (16/789). Conclusions: The incorporation of AI and machine learning into an automated microscopy system demonstrated the potential to enhance the sensitivity and efficiency of AFB detection in sputum smears compared to conventional manual microscopy. This approach holds promise for widespread application in TB diagnostics and potentially other fields requiring labor-intensive microscopic examination.

Modification of electrode surface with a selective layer gives the possibility to detect target ana-lytes of forensic interest. 3-(4-trifluoromethyl)-phenyl)-thiophene (ThPhCF3) was deposited on a graphite (G) electrode by electrochemical oxidation and characterized as a receptor for the recognition of synthetic stimulants (2-aminoindane, buphedrone, naphyrone). First, the structural characterization of the polymeric layer were obtained from Raman spectroscopy. Second, the electrochemical profiles of selected synthetic stimulants and their affinity to ThPhCF3/G-modified electrodes were studied using square wave voltammetry and electrochemical impedance spec-troscopy. The values of the adsorption constant show the importance of – PhCF3 groups in the interaction with synthetic stimulants, namely recognition by the formation of hydrogen bonds (Kads (buphedrone) < Kads (2-AI)) and interaction with aromatic H atoms (Kads (buphedrone) < Kads (naphyrone)). It was demonstrated that the polymeric layer derived from thiophene with – PhCF3 group is capable to increase the intensity of the electrochemical signal.

This paper proposes a novel facial expression recognition network called the Lightweight Facial Network with Spatial Bias (LFNSB). The LFNSB model balances model complexity and recognition accuracy. It has two key components: a lightweight feature extraction network (LFN) and a Spatial Bias (SB) module for aggregating global information. The LFN introduces combined channel operations and depthwise convolution techniques, effectively reducing the number of parameters while enhancing feature representation capability. The Spatial Bias module enables the model to focus on local facial features while also capturing the dependencies between different facial regions. Additionally, a novel loss function called Cosine-Harmony Loss is designed. This function optimizes the relative positions of feature vectors in high-dimensional space, resulting in better feature separation and clustering. Experimental results on the AffectNet and RAF-DB datasets show that the proposed LFNSB model performs excellently in facial expression recognition tasks. It achieves high recognition accuracy while significantly reducing the number of parameters, thus substantially lowering model complexity.

Digital photogrammetry has attracted widespread attention in the field of geotechnical and geological survey due to its low-cost, ease of use and contactless mode. In this work, with the purpose of studying the progressive block surficial detachments of a landslide we developed a monitoring system based on fixed multi-view time-lapse cameras. Thanks to a new-developed photogrammetric algorithm based on the comparison of photo sequences through a structural similarity metric and the computation of the disparity map of two convergent views we can quickly detect the occurrence of collapse events, determine their location and calculate the collapse volume. With the field data obtained at the Perarolo landslide site (Belluno Province, Italy), we have preliminary tested the effectiveness of the algorithm and its accuracy in the volume calculation. The method of quickly and automatically obtaining collapse information proposed in this paper can extend the potentials of landslide monitoring system based on videos or photo sequence and it will be of great significance for further research on the link between the frequency of collapse events and the driving factors.

Recent advancements in brain stimulation and nanomedicine have ushered in a new era of therapeutic interventions for psychiatric and neurodegenerative disorders. This review explores the cutting-edge innovations in brain stimulation techniques, including their applications in alleviating symptoms of main neurodegenerative disorders and addiction. Emphasis is placed on the underlying main neurotransmitter modifications and their specific brain area location, particularly focusing on the dopaminergic system, which plays a critical role in these conditions. Furthermore, the review delves into the groundbreaking developments in nanomedicine, highlighting how nanotechnology can be utilized to target aberrant signaling in neurodegenerative diseases, with a specific focus on the dopaminergic system. The discussion extends to emerging technologies such as magnetoelectric nanoparticles (MENPs), which represent a novel intersection between nanoformulation and brain stimulation approaches. These innovative technologies offer promising avenues for enhancing the precision and effectiveness of treatments by enabling non-invasive, targeted delivery of therapeutic agents as well as on site, on-demand stimulation. By integrating insights from recent research and technological advances, this review aims to provide a comprehensive understanding of how brain stimulation and nanomedicine can be synergistically applied to address complex neuropsychiatric and neurodegenerative disorders, paving the way for future therapeutic strategies.

The sleeping and grazing behaviors of horses play a crucial role in their health and welfare. In the horse industry, with the prevalent trend of individual single-stall farming in stable, accurately identifying various behaviors of horses within stables is imperative. This study has established a spatio-temporal dataset for horse postures and behaviors, proposed an algorithm utilizing a SE-SlowFast network with an enhanced loss function. This algorithm achieves automatic recognition of multiple postures and behaviors of horse simultaneously. The model developed in this study demonstrates high accuracy in identifying three postures within the stable: Standing, Crouching, and Lying, achieving respective accuracies of 92.73%, 91.87%, and 92.58%. Additionally, it accurately recognizes two behaviors: Sleeping and Grazing, achieving best accuracies of 93.56% and 98.77%. The overall best accuracy of the model is 93.9%. Experiments on video recognition confirm that the suggested model recognizes horse video data accurately. This study marks the first time computer vision technology has been used in the horse farming industry, achieving non-intrusive recognition of multiple horse postures and behaviors. This study provides valuable data support for livestock managers to evaluate the health conditions of horses, enhances the welfare of horses in stables, and contributes to the advancement of modern horse husbandry practices.

Identifying punch types as part of punch kinematic analysis is a key component for both coaches and players, providing critical insights into the variety and effectiveness of punches, which are essential for refining overall performance. Existing research indicates that punch type classification typically relies on data from either wearables or video data. Both approaches have their merits and demerits but require a significant amount of labeled data for modeling the classification algorithm. In this work, we propose a novel approach that significantly reduces the labeling effort by one-sixth by leveraging video data to enhance the training information of sensor data. This enriched training phase enables more accurate punch classification with reduced labeled data. Subsequently, the real-time punch identification and classification use only the wearable data. On a real dataset, with 15% of the labeling efforts, our approach achieved an accuracy rate of 91.41% for rear hand punch recognition and 91.91% for lead hand punch recognition, along with 92.33% and 94.56% for punch classification, respectively. Through the development of our Smart Boxer system, we aim to revolutionize punch analytics in boxing, providing comprehensive insights while enhancing the overall training and competitive experience for athletes and enriching fan engagement with the sport.

Pipelines extend thousands of kilometers to transport and distribute oil and gas. Given the challenges often faced with corrosion, fatigue, and other issues on steel pipes, the demand for glass fiber reinforced plastics (GFRP) pipes is increasing in the oil and gas gathering and transmission systems. However, the medium transported through these pipelines contains multiple acid gases such as CO2 and H2S, as well as ions including Cl-、Ca2+、Mg2+、SO42-、CO32- and HCO3-. These substances can cause a series of problems, such as aging, debonding, delamination, and fracture. In this study, a series of aging damage experiments were conducted on V-shaped GFRP pipes with depths of 2mm and 5mm. The aging and failure of GFRP were studied under the combined effects of external force and acidic solution using acoustic emission (AE) techniques. It was found that the acidic aging solution promoted matrix damage, fiber/matrix desorption, and delamination damage in GFRP pipes over a short period. However, the overall aging effect was relatively weak. Based on the experimental data, the SSA-LSSVM algorithm was proposed and applied to the damage pattern recognition of GFRP. An average recognition rate of up to 90% was achieved, indicating that this method is highly suitable for analyzing AE signals related to GFRP damage.

Rett syndrome (RTT) is an X-linked neurodevelopment disorder associated with the single monogenic mutation in methyl-CpG binding protein 2 (MeCP2) in up to 95% of cases. The growing number of genome-wide association studies and incomplete concordance for autoimmune diseases in monozygotic twins concur to support the involvement of environmental factors, like infectious agents or chemicals, in the breakdown of tolerance leading to autoimmunity. In fact, the coexistence of a perturbation of the immune system in RTT patients has been previously hypothesized. We herein explored the hypothesis that an autoimmune component derived from environmental bacterial infection of non typeable Haemophilus influenzae may coexist in RTT. At this purpose we screened sera from RTT syndrome patients, non-RTT pervasive developmental disorders patients and healthy controls with the hyperglucosylated adhesin protein HMW1ct(Glc) used as a precise antigen in ELISA in order to identify specific antibodies to N-glucosylation sites. Results showed that HMW1ct(Glc) is able to significantly discriminate antibodies among RTT sera and controls. Competitive ELISA confirmed the specific interaction between antibodies characteristic of RTT syndrome and the N-glucosylation motifs of the bacterial adhesin protein HMW1ct(Glc).

Understanding the distribution of rock glaciers provides key information for investigating and recognizing the status and changes of the periglacial environment. Deep learning algorithms and red-green-blue (RGB) bands from high-resolution satellite images have been extensively employed to map rock glaciers. However, the near-infrared (NIR) band offers rich spectral information and sharp edge features that could significantly contribute to semantic segmentation tasks, but it is rarely utilized in constructing rock glacier identification models due to the limitation of three input bands for classical semantic segmentation networks, like DeeplabV3+. In this study, a dual-encoder DeeplabV3+ network (DEDNet) was designed to overcome the flaws of classical DeeplabV3+ network (CDNet) when identifying rock glaciers using multispectral remote sensing images by extracting spatial and spectral features from RGB and NIR bands, respectively. This network, trained with manually labeled rock glacier samples from QiLian Mountains, established a model with accuracy, precision, recall, specificity, and mIoU (Mean Intersection over Union) of 0.9131, 0.9130, 0.9270, 0.9195, and 0.8601, respectively. The well-trained model was applied to identify new rock glaciers in a test region, achieving a producer's accuracy of 93.68% and a user's accuracy of 94.18%. Furthermore, the model was employed to two study areas in northern Tien Shan (Kazakhstan) and Daxue Shan (Hengduan Shan, China) with high accuracy, which proved that the DEDNet offers an innovative solution to more accurately map rock glaciers on a larger scale due to its robustness across diverse geographic regions.

Parkinson’s Disease (PD) is a neurodegenerative and progressive disease that impacts the nerve cells in the brain and varies from person to person. The exact cause of PD is still unknown, and the diagnosis of PD does not include a specific objective test with certainty. Although deep learning has made great progress in medical neuroimaging analysis, these methods are very susceptible to biases present in neuroimaging datasets. An innovative decorrelated deep learning technique is introduced to mitigate class bias and scanner bias while simultaneously focusing on finding distinguishing characteristics in resting-state functional MRI (rs-fMRI) data, which assist in recognizing the PD with good accuracy. The decorrelation function reduces the non-linear correlation between features and bias in order to learn bias-invariant features. The Parkinson’s Progression Markers Initiative (PPMI) dataset, referred to as a single scanner imbalanced dataset in this study used to validate our method. The imbalanced dataset problem affects the performance of the deep learning framework by overfitting to the majority class. To resolve this problem, we propose a new Decorrelated Convolutional Neural Networks (DcCNN) framework by applying decorrelation-based optimization to Convolutional Neural Networks(CNN). An analysis of evaluation metrics comparisons shows that integrating the decorrelation function boosts the performance of PD recognition by removing class bias. Specifically, our DcCNN model performs significantly better than existing traditional approaches to tackle the imbalance problem. Finally, the same framework can be extended to create scanner invariant features without significantly impacting the performance of a model. The obtained dataset is a multi-scanner dataset which leads to scanner bias due to the differences in acquisition protocols and scanners. The multi-scanner dataset is a combination of two datasets, namely PPMI and FTLDNI - frontotemporal lobar degeneration neuroimaging initiative (NIFD) dataset. The results of t-distributed stochastic neighbor embedding (t-SNE) and scanner classification accuracy of our proposed Feature Extraction-DcCNN (FE-DcCNN) model validated the effective removal of scanner bias. Our method achieves an average accuracy of 77.80% on a multi-scanner dataset for differentiating PD from healthy control, which is superior to the DcCNN model trained on a single scanner imbalanced dataset.

Cross-lingual sentiment analysis is crucial for understanding and interpreting emotions expressed in text across diverse linguistic contexts. However, cross-lingual sentiment analysis faces challenges such as differences in emotional lexicons, data imbalance, and the need for multi-language sentiment normalization. In this study, we propose a novel approach to address these challenges by leveraging low-resource language training techniques to enhance cross-lingual sentiment analysis. Our method aims to bridge the gap in emotional lexicons by adapting sentiment analysis models to diverse linguistic contexts. Additionally, we tackle issues of data imbalance through innovative data augmentation strategies tailored to each language, and we introduce a multi-language sentiment normalization technique to ensure consistent sentiment interpretation across different languages. Our method achieved state-of-the-art results in twelve languages across four domains, demonstrating superior performance in both text-level and sentence-level sentiment analysis tasks. By conducting comprehensive evaluations across diverse linguistic contexts and domains, we showcase the versatility and effectiveness of our approach in achieving top-tier results in cross-lingual sentiment analysis.

Named Entity Recognition (NER) serves as a fundamental and pivotal stage in the development of various knowledge-based support systems, including knowledge retrieval and question answering systems. In the domain of pig diseases, Chinese NER models encounter several challenges such as the scarcity of annotated data, domain-specific vocabulary, diverse entity categories, and ambiguous entity boundaries.To address these challenges, a corpus, labeled datasets and a lexicon specific to pig diseases for Chinese named entity recognition were constructed. Subsequently, a Pig Disease Chinese Named Entity Recognition (PDCNER) model was proposed. The model integrates external lexicon knowledge of pig disease by employing Lexicon-enhanced BERT and enhance feature representation by incorporating contrastive learning. Experimental results show that the model achieved the best recognition results, with a precision of 86.92%, a recall of 85.08%, and an F1-score of 85.99% respectively. Furthermore, the model exhibits robustness and generalizability across few-shot and publicly available datasets. Experimental results illustrate the proposed model could effectively identify Chinese named entities of pig diseases, outperforming several existing baseline methods. Moreover, the proposed model can be extended to other animal disease domains, such as chicken and cattle, thereby facilitating seamless adaptation for named entity identification across diverse contexts.

With the advancement of technology, signal modulation types are becoming increasingly diverse and complex. The phenomenon of signal time-frequency overlap during transmission poses significant challenges for the classification and recognition of mixed signals, including poor recognition capabilities and low generality. This paper presents a recognition model for fine-grained analysis of mixed signal characteristics, proposing a Geometry Coordinate attention mechanism and introducing a low-rank bilinear pooling module to more effectively extract signal features for classification. The model employs a residual neural network as its backbone architecture and utilizes the Geometry Coordinate attention mechanism for time-frequency weighted analysis based on information geometry theory. This analysis targets multiple-scale features within the architecture, producing time-frequency weighted features of the signal. These weighted features are further analyzed through a low-rank bilinear pooling module, combined with the backbone features, to achieve fine-grained feature fusion. This results in a fused feature vector for mixed signal classification. Experiments were conducted on a simulated dataset comprising 39,600 mixed signal time-frequency plots. The model was benchmarked against a baseline using a residual neural network. The experimental outcomes demonstrated an improvement of 9% in the exact match ratio and 5% in the Hamming score. These results indicate that the proposed model significantly enhances the recognition capability and generalizability of mixed signal classification.

As climate changes, our daily life has been much influenced by abnormal meteorological phenomena such as heavy rainfall, heat wave, heavy snowfall, and fine dust. Atmospheric air quality is worsening day by day and indoor air quality is also affected by interconnected daily activities throughout the inside and outside of buildings and houses. Nowadays, pollutants from various sources are emitted, transformed by sunlight, vapor, and ozone and transported into the city from country to country. Due to these reasons, there have been high demands to monitor the transportation of particulate matters and improve air quality. Monitoring of pollutants and identification of type and its concentration enables us to track and control its generation and consequently find out the solution. However, monitoring of pollutants, especially, particulate matter generation and its transportation is still not fully operated in atmospheric air due to its open nature and meteorological factors. Even though indoor air is relatively easy to monitor and control than outdoor in the aspect of specific volume and contaminant source, but it still needs to consider the meteorological parameters because indoor air is not fully separated from the outdoor air flow and contaminants transportation. In this study, optical approach using spectral sensor was attempted to reveal the feasibility of wavelength and chromaticity values of reflected light from specific particles. From the analysis of reflected light of various particulate matters according to different liquid additives, parameter studies were performed to investigate which experimental conditions can contribute to the enhanced selective sensing of particulate matters. Five different particulate matters such as household dust, soil, talc powder, gypsum powder and yellow pine tree pollen were utilized and observed to elucidate the relationship between property of particulate matter and detected light spectrum. Applicable approaches to assist current particle matter sensors and improve the selective sensing were suggested.

Extracting entities from large volumes of chicken epidemic texts is crucial for knowledge sharing, integration, and application. However, Named Entity Recognition (NER) encounters significant challenges in this domain, particularly due to the prevalence of nested entities and domain-specific named entities, coupled with a scarcity of labeled data. To address these challenges, we compiled a corpus from 50 books on chicken diseases, covering 28 different disease types. Utilizing this corpus, we developed a nested NER model, MFGFF-BiLSTM-EGP. This model integrates the Multiple Fine-Grained Feature Fusion (MFGFF) module with a BiLSTM neural network and employs an Efficient Global Pointer (EGP) for predicts the entity location encoding. In MFGFF module we designed three encoders, character encoder, word encoder and sentence encoder, this design effectively captures fine-grained features and improves the recognition accuracy of nested entities. Experimental results show that the model performs robustly, with F1 scores of 91.98%, 73.32%, and 82.54% on the CDNER, CMeEE V2, and CLUENER datasets, respectively, outperforming other commonly used NER models. Specifically, on the CDNER dataset, the model achieved an F1 score of 79.68% for nested entity recognition. This research not only advances the development of knowledge graph and intelligent question-answering system for chicken diseases but also provides a viable solution for extracting disease information that can be applied to other livestock species.

Superantigens are unconventional antigens which recognise immune receptors outside the usual binding sites e.g. complementary determining regions (CDRs), to elicit a response within the target cell. T-cell superantigens crosslink T-cell receptors and MHC Class II molecules on antigen-presenting cells, leading to lymphocyte recruitment, induction of cytokine storms and T-cell anergy or apoptosis among many other effects. B-cell superantigens, on the other hand, bind immunoglobulin receptors on B-cells affecting opsonisation, IgG-mediated phagocytosis, and drive B-cells into apoptosis. Here, through a review of the structural basis for recognition of immune receptors by superantigens, we show that their binding interfaces share specific physicochemical characteristics when compared with other protein-protein interaction complexes. Given that antibody-binding superantigens have been exploited extensively in industrial antibody purification, these observations could facilitate further protein engineering to optimize the use of superantigens in this and other areas of biotechnology.

It is a challenging problem that air-written Arabic letters has received a lot of attention in the past decades when compared to commonly spoken languages like English languages. To fill this gap, we propose a strong model that brings together machine learning (ML) and optical character recognition (OCR) methods. The model applied several ML methods, (i.e., Neural Networks (NN), Random Forest (RF), K-Nearest Neighbors (KNN), and Support Vector Machine (SVM), with deep convolutional neural networks (CNNs) such as VGG16, VGG19, and SqueezeNet for effective feature extraction. Our study utilizes the AHAWP dataset, which consists of varied writing styles and variations in hand signs, to train and evaluate the model. Preprocessing systems are applied to improve data quality by reduction bias. Besides, OCR methods are combined into our model to sequestrate individual letters from continuous air-written gestures and refine recognition results. Results of this study show that the proposed model has achieved the extreme accuracy of 88.8% using NN with VGG16. This study presents an inclusive approach that combines ML, deep CNNs, and OCR methods to address the issue of Arabic in air writing recognition research.

A large part of our understanding of the biological substrates of sex-recognition and mate-recognition is derived by studying animal models. In performing those tasks, rodents rely mostly of pheromones and other olfactory cues, whereas humans rely mostly on visual cues. That may hinder the translation of rodents’ biology to humans’ biology, especially at the neural-networks level, where those cues traverse different networks in humans and rodents brains. That may be called the “pheromonal-visual gap”. A theoretical model presented here addresses those issues. The model merges observations from humans and model-animals, as reported in specific scientific reports, and general biological principles that are accepted by the scientific community. The model suggests that the voices of men and women are the innate cues based on which humans learn to use visual cues in sex-recognition and mate-recognition. Children learn the two tasks in associative learning mechanisms, by being immersed in their community, and observing adult role-models in innocuous, non-sexual scenarios. The model proposes that the human medial-geniculate-nucleus (MGN) is the analog of the rodents’ accessory-olfactory-bulb (AOB) and the main-olfactory-bulb (MOB), and that the human MASH pathway (MGN, amygdala, bnST, hypothalamus) is the analog of the rodents’ VNOP (Vomeronasal-organ-pathway). Considering the differences in the pathways should facilitate the translation from rodents’ brain nuclei and tracks to humans’. Also, the model hypothesizes that innate direct and indirect connections between auditory centers, e.g., MGN, and sex-control centers, e.g., hypothalamus, vary across three groups of children, and those variations determine the individual’s mate-recognition that emerges at puberty.

Named Entity Recognition (NER) is a fundamental and pivotal stage in the development of various knowledge-based support systems, including knowledge retrieval and question-answering systems. In the domain of pig diseases, Chinese NER models encounter several challenges such as the scarcity of annotated data, domain-specific vocabulary, diverse entity categories, and ambiguous entity boundaries. To address these challenges, we propose PDCNER, a Pig Disease Chinese Named Entity Recognition method leveraging lexicon-enhanced BERT and contrastive learning. Firstly, we construct a domain-specific lexicon and pre-train word embeddings in the pig disease domain. Secondly, we integrate lexicon information of pig diseases into the lower layers of BERT using a Lexicon Adapter layer, which employs char-word pair sequences. Thirdly, to enhance feature representation, we propose a lexicon-enhanced contrastive loss layer on top of BERT. Finally, a Conditional Random Field (CRF) layer is employed as the model's decoder. Experimental results show that our proposed model demonstrates superior performance over several mainstream models, achieving a precision of 87.76%, a recall of 86.97%, and an F1-score of 87.36%. The proposed model outperforms BERT-BiLSTM-CRF and LEBERT by 14.05% and 6.8%, respectively, with only 10% of the samples available, showcasing its robustness in data scarcity scenarios. Furthermore, the model exhibits generalizability across publicly available datasets. Our work provides reliable technical support for the information extraction of pig diseases in Chinese and can be easily extended to other domains, thereby facilitating seamless adaptation for named entity identification across diverse contexts. The codes have been open-sourced at https://github.com/tufeifei923/pdcner.

Abstract: Hand gestures are an essential kind of nonverbal communication that let people engage and be expressive with one another. As technology has progressed, hand gesture recognition systems have become an important field of study, providing a link between human activities and artificial intelligence. An overview of the field of hand gesture recognition systems is given in this abstract, along with an explanation of its importance, difficulties, and possible uses. This abstract begins by examining the role that hand gestures have in communication. It then goes on to show the cultural significance and wide range of variations in gestural expressions that occur in many contexts and societies. Artificial intelligence systems face a unique problem in comprehending and interpreting these motions, which calls for the combination of computer vision, machine learning, and pattern recognition approaches. The abstract goes on to address why people develop hand motions. The purpose behind creating systems to recognize hand gestures is also covered in the abstract, with a focus on how these systems could improve human-computer interaction in several fields, including robotics, virtual reality, healthcare, and assistive technologies. These systems have the potential to enhance accessibility, efficiency, and user experience by allowing people to engage with devices and interfaces naturally and intuitively. The abstract also discusses environmental elements including backdrop clutter and lighting, as well as the technological difficulties in identifying and understanding hand gestures, which include variations in hand forms, orientations, and movements. To tackle these obstacles, strong algorithms that can record and interpret complex hand movements in real-time must be developed.

The idea of developing a robot controlled by iris movement to assist physically disabled individuals is indeed innovative and has the potential to significantly improve their quality of life. This technology can empower individuals with limited mobility and enhance their ability to interact with their environment. Disability of movement has huge impact on the life of physically disabled people. Therefore, there is need to develop a robot which can be controlled using iris movement. The main idea of this work revolves around iris recognition from an eye image, specifically identifying the centroid of the iris. The centroid's position is then utilized to issue commands to control the robot. This innovative approach leverages iris movement as a means of communication and control, offering a potential breakthrough in assisting individuals with physical disabilities. The proposed method aims to improve the precision and effectiveness of iris recognition by incorporating advanced segmentation techniques and fuzzy clustering methods. The fast gradient filters using a fuzzy inference system (FIS) is employed to separate the iris from its surroundings. Then, the bald eagle search (BES) algorithm is employed to locate and isolate the iris region. Subsequently, the Fuzzy KNN algorithm is applied for the matching process. This combined methodology aims to improve the overall performance of iris recognition systems by leveraging advanced segmentation, search, and classification techniques. The results of the proposed model are validated using True Success Rate (TSR) and compared to other existing models. The results highlight the effectiveness of the proposed method for the 400 tested images representing 40 people.

To date, the development of unmanned technologies using autonomous underwater vehicles (AUV) has become an urgent demand for solving the problem of inspection of industrial sub-sea structures. A key issue here is precise localization of AUVs relative to underwater objects. However, the well-known challenges of recognizing and coordinating underwater objects (impossibility to use GPS, undercurrents, etc.) do not allow high-precision navigation if based solely on a standard suite of AUV navigation tools (sonars, etc.). An alternative is a technology of processing of optical images that, at short distances, can provide higher accuracy of AUV navigation compared to a technology of acoustic measurement processing. In this study, in the context of the problem of subsea production system inspection, we propose a method to recognize underwater objects and provide coordinate reference of AUV to them, based on stereo-image processing. Its distinctive features are the use of a non-standard technique for generating a geometric model of an object from its views (foreshortening) taken from positions of a pre-made overview trajectory, the use of various characteristic geometric elements when recognizing objects, and the original algorithms for comparing visual data of the inspection trajectory with an a priori model of the object.

The article proposes to use a radio holography for the detection and identification of unmanned aerial vehicles (UAVs).

In the present era, there is no longer a necessity to rely on outdated and laborious methods for attendance management in the field of education. Managing attendance for large groups of students in a classroom can be a challenging and time-consuming task when it comes to recording data. Fortunately, modern technologies offer us the opportunity to streamline attendance management and make it more efficient. One effective approach is Real-Time Face Recognition, which simplifies the process of tracking attendance for numerous students daily. We employ the Haar cascade classifier to identify positive and negative facial attributes, along with the LBPH algorithm for accurate face recognition. These techniques are implemented using Python programming language and the OpenCV library while incorporating a user-friendly Tkinter GUI (Graphical User Interface) for seamless usability. By embracing these advancements, we can revolutionize how attendance is managed in educational environments.

Accurate and robust deep learning models for facial expression recognition are challenging to achieve, given the diversity of human faces and variations in images, including different facial poses and lighting conditions. In this work, we proposed a clock-driven convolutional Spiking Neural Network (SNN) and STDP fine-tune architecture, meticulously calibrated its hyperparameters, and experimented with various optimization methods. The best model resulted was trained and evaluated on the Fer2013 and FER+ database, obtaining an accuracy of 61.87% and 79.97% without requiring auxiliary training data or face registration. To our best knowledge, the proposed SNN achieved comparable accuracy to CNNs of similar depth and possessed the advantages of low energy consumption and high computational efficiency. The computational efficiency of the proposed SNN is approximately three times that of CNNs. Along with this, we introduced the very recent cumulative spike guided encoder visualization technique and revealed the strong encoding capability of the proposed SNN.

The canonical decomposition of a bipartite graph is a new decompositionmethod that involves three operators, parallel, series and K+S. The class of weak bisblit graphs is totally decomposable with respect of these operators, and the class of bicographs is totally decomposable with respect of parallel and series operators. We prove in this paper that the class of bipartite (P_6,C_6)-free graphs is exactly the class of bipartite graphs that are totally decomposable with respect of parallel and K+S operators. We simplify the recognition algorithm of weak-bisplit graphs to adepte with bipartite (P_6,C_6)-free graphs. As a result of this adapted algorithm, we prsent efficient solutions in this class of graphs for two optimization graph problems, the first is the maximm balanced bi-clique problem and the the second is the maximum independent set problem.

The research on the distribution of rural buildings is one of the fundamental works of urban-rural development in Vietnam. Adopting Mask R-CNN deep learning framework and collecting sub-meter remote sensing images, this research used a remote sensing interpretation model of rural buildings trained based on East Asian characteristics of rural buildings and successfully recognized about 2.87 million rural buildings in 34 Vietnamese provincial administrative districts with a total area of rural buildings of 2,492 million square meters. The reliability of the identification results was verified by manual detection and quantitative statistics, and a multi-scale database of rural buildings in Vietnam based on individual rural buildings was created. Based on the database, this paper analyzes the distribution characteristics of rural buildings and summarizes characteristics of rural buildings distribution at the country, regional, and provincial scales. The identification results lay the foundation for the next study of urban-rural relations in Southeast Asia and the construction of a basic database on villages.

Indoor scene recognition and semantic information can be helpful for social robots. Recently, in the field of indoor scene recognition, researchers have incorporated object-level information and shown improved performances. This paper demonstrates that scene recognition can be performed solely using object-level information in line with these advances. A state-of-the-art object detection model was trained to detect objects typically found in indoor environments and then used to detect objects in scene data. These predicted objects were then used as features to predict room categories. This paper successfully combines approaches conventionally used in computer vision (YOLO) and Term Frequency-Inverse Document Frequency (TF-IDF). These approaches could be further helpful in the field of embodied research and dynamic scene classification, which we elaborate on.

The ability to express and recognize emotion via facial expressions is well known to change with age. The present study investigated the differences in the facial recognition and facial expression of the elderly (n = 57) and the young (n = 115) and measure how each group uses different facial muscles for each emotion with Facial Action Coding System (FACS). In facial recognition task, the elderly did not recognize facial expressions better than young people and reported stronger feelings of fear and sad from photographs. In making facial expression task, the elderly rated all their facial expressions as stronger than the younger, but in fact, they expressed strong expressions in fear and anger. Furthermore, the elderly used more muscles in the lower face when making facial expressions than younger people. These results help to understand better how the facial recognition and expression of the elderly change, and show that the elderly do not effectively execute the top-down processing concerning facial expression.

Nowadays, speed up development and use of digital devices such as smartphones have put people at risk of internet crimes. The evidence of present crimes in a computer file can be easily unreachable by changing the prefix of a file or other algorithms. In more complex cases, either file divided into different parts or the parts of a file that has information about the file type are deleted, where the file fragment recognition issue is discussed. The known files are divided into different fragments, and different classification algorithms to solve the problems of file fragment recognition. A confusion matrix measures the accuracy of type recognition. In the present study, first, the file is divided into different fragments. Then, the file fragment features, which are obtained from Binary Frequency Distribution (BFD), are reduced by 2 feature reduction algorithms; Sequential Forward Selection algorithm (SFS) as well as Sequential Floating Forward Selection algorithm (SFFS) to delete sparse features that result in increased accuracy and speed. Finally, the reduced features are given to 3 classifier algorithms, Multilayer Perceptron (MLP), Support Vector Machines (SVM), and K-Nearest Neighbor (KNN) for classification and comparison of the results. In this paper, we proposed the algorithm of file type recognition that can recognize 6 types of useful files ( pdf, txt, jpg, doc, html, exe), which may distinguish a type of file fragments with higher accuracy than the similar works done.

The dominant paradigm holds that spontaneous and therapeutically induced anti-tumor responses are mediated mainly by CD8 T cells and directed against tumor-specific antigens (TSAs). The presence of specific TSAs on cancer cells can only be proven by mass spectrometry analyses. Bioinformatic predictions and reverse immunology studies cannot provide this type of conclusive evidence. Most TSAs are coded by unmutated non-canonical transcripts that arise from cancer-specific epigenetic and splicing aberrations. When searching for TSAs, mass spectrometry analyses must therefore interrogate not only the canonical reading frame of annotated exome but all reading frames of the entire translatome. The majority of aberrantly expressed TSAs (aeTSAs) derive from unstable short-lived proteins that are good substrates for direct MHC I presentation but poor substrates for cross-presentation. This is an important caveat because cancer cells are poor antigen-presenting cells and the immune system therefore depends on cross-presentation by dendritic cells (DCs) to detect the presence of TSAs. We therefore postulate that, in the untreated host, most aeTSAs are undetected by the immune system. We present evidence suggesting that vaccines inducing direct aeTSA presentation by DCs represent an attractive strategy for cancer treatment.

Face recognition is one of the most active research fields of computer vision and pattern recognition, with many practical and commercial applications including identification, access control, forensics, and human-computer interactions. However, identifying a face in a crowd raises serious questions about individual freedoms and poses ethical issues. Significant methods, algorithms, approaches, and databases have been proposed over recent years to study constrained and unconstrained face recognition. 2D approaches reached some degree of maturity and reported very high rates of recognition. This performance is achieved in controlled environments where the acquisition parameters are controlled, such as lighting, angle of view, and distance between the camera-subject. However, if the ambient conditions (e.g., lighting) or the facial appearance (e.g., pose or facial expression) change, this performance will degrade dramatically. 3D approaches were proposed as an alternative solution to the problems mentioned above. The advantage of 3D data lies in its invariance to pose and lighting conditions, which has enhanced recognition systems efficiency. 3D data, however, is somewhat sensitive to changes in facial expressions. This review presents the history of face recognition technology, the current state-of-the-art methodologies, and future directions. We specifically concentrate on the most recent databases, 2D and 3D face recognition methods. Besides, we pay particular attention to deep learning approach as it presents the actuality in this field. Open issues are examined and potential directions for research in facial recognition are proposed in order to provide the reader with a point of reference for topics that deserve consideration.

This paper propose an original approach of achieving a Cymatics based visual perception of isolated speech commands. The idea is to smartly combine the effective speech processing and analysis methods with the phenomena of Cymatics. In this context, an effective approach for automatic isolated speech based message recognition is proposed. The incoming speech segment is enhanced by applying the appropriate pre-emphasis filtering, noise thresholding and zero alignment operations. The Mel-Frequency Cepstral coefficients (MFCCs), Delta coefficients and Delta-Delta coefficients are extracted from the enhanced speech segment. Later on, the Dynamic Time Warping (DTW) technique is employed to compare these extracted features with the reference templates. The comparison outcomes are used to make the classification decision. The classification decision is transformed into a methodical excitation. Finally, this excitation is converted into the systematic visual perceptions via the phenomenon of Cymatics. The system functionality is tested with an experimental setup and results are presented. The approach is novel and can be employed in various applications like visual art, encryption, education, archeology, architecture, integration of impaired people, etc.