.With the increasing use of carbon fiber reinforced plastics in various area, carbon fiber composites based on prepregs have attracted attention in industries and academia research. However, prepreg manufacturing processes are costly, and the strength of structures varies depending on the orientation and defects (pores and delamination). For non-contact evaluation of internal defects, we proposed lock-in infrared thermography to investigate orientation angles after a compression test. We also conducted a drop-weight impact test to study the behaviour of the composites after impact according the fibers orientation for composite fabricated using unidirectional carbon fiber prepregs. Using CAI tests, we determined the residual compressive strength and confirmed the damage modes using a thermal camera. The results of the drop weight impact tests show that the specimen laminated at 0° suffered the largest damage because of susceptibility of the resin to impact. In contrast, the specimens oriented in of 0°/90° and +45°/–45° directions transferred more than 90% of the impact energy back to the impactor because of the lamination of fibers in the orthogonal directions. Furthermore, the specimens that underwent complete damage in the impact tests were subjected to the lock-in method and showed internal delamination and cut fibers. With the finite elements analysis, the damage of each ply could be observed. Moreover, the temperature differences in the residual compression tests were not significant.

The adapted Posner spatial cue-target paradigm was used to explore the relationship between exogenous temporal attention caused by rhythm and endogenous and exogenous spatial attention. The study was divided into two experiments. In Experiment 1, 33 participants used arrow cues to orient endogenous spatial attention and rhythm to orient exogenous temporal attention. In Experiment 2, with 29 participants, exogenous spatial attention was directed by highlighting the cue box. Exogenous temporal attention was directed by rhythm. Experiment 1 indicated that RTs were faster for attended targets than the unattended. The main effect of temporal attention was significant, with RTs being faster for synchrony and late compared to early. RTs were faster for late compared to synchrony. The main effect of stimulus repetition was significant, with faster RTs for targets when the rhythmic cue consisted of five compared to four. The interaction between spatial attention and temporal attention was not significant. Experiment 2 demonstrated that exogenous spatial attention only exhibited IOR under early four stimulus repetitions. The main effect of temporal attention was significant, with RTs being faster for synchrony and late compared to early. The main effect of stimulus repetition was significant, with faster RTs for targets when the rhythmic cue consisted of five compared to four. The interaction between spatial attention and temporal attention was significant. The results indicated that rhythmic temporal attention supported foreperiod effects. Exogenous temporal attention and endogenous spatial attention independently affect behavior, while exogenous temporal attention and exogenous spatial attention mutually influenced behavior.

The objective of this study is to determine the relationship between body condition score (BCS) and body carcass fat (BCF) of ewes at two key stages of the production cycle. Data were collected from 88 Coopworth ewes including BCS measurements manually evaluated by the farm manager, BCF measurements determined by computerized tomography (CT) and body parameter measurements automatically determined by an image processing application. Artificial neural network (ANN) statistical analysis method was used to develop a relationship between the body parameters and the BCF with an r2=0.96 and RMSE=1.01 using all top and side variables.

Background and Objectives: High job strain is worsening the outcome in coronary artery disease, CAD. Severe dissatisfaction on workplace, imbalance between high demands , and low rewards, are affecting the quality of life, and diminishing the duration of life, especially in CAD patients. Our study included two samples : CAD patients (experimental group), and without CAD patients, but with traditional risk factors (control group). The main objective of the study was the role played by high sensitivity C reactive protein, hs CRP, and microalbuminuria, as mediators of job strain and CAD relationship. Secondary objectives were the following: identification of the most vulnerable patients( with significant job strain) and intervention towards this category, for cardiovascular events prevention (primary or secondary). Materials and Methods: The utilized methods were the following : clinical exam; electrocardiogram; echocardiogram; non contrast enhanced computed chest tomography; laboratory findings ( lipid profile, glycemia, hs CRP, microalbuminuria); type D scale, DS 14; depression questionnaire, PHQ-9; and satisfaction with work scale, SWWS. Results: The highest values for hs CRP and microalbuminuria were noticed in patients with the lowest Likert score, for both samples CAD, and without CAD patients. The highest job strain was noticed in females. More than half of CAD patients ,with low Likert scores, revealed myocardial infarction. Conclusions: Microalbuminuria and hs CRP were statistical significant in the study as intercessors, in job strain and CAD relationship. The most vulnerable patients for vascular events were females, in both groups : CAD and “CAD waiting desk”. In CAD sample, the vascular vulnerability was also increased by high job strain.

Based on the dynamic strength variation mechanism of concrete under complex loading conditions, two approaches were devised: numerical testing and CT scanning, guided by the principle of minimizing energy dissipation. A methodology for calculating concrete's failure area and measuring its strength was developed. The analysis delves into the mechanisms behind failure patterns and variations in concrete specimen strength, focusing on crack initiation, development, and the resultant failure surface formed by crack propagation, along with the stress distribution in concrete specimens subjected to diverse loading conditions. Through evaluating the strength and computed failure area of concrete specimens, it is evident that the loading method influences both the strength and failure area of concrete specimens. In general, a larger failure area correlates with a higher measured strength.

The relationship between the structure characteristics and performances of coal based hydrogenation isomeric base oil (CTL) and metallocene catalyzed coal based polyalphaolefin (mPAO) base oil was clarified here. CTL and mPAO were compared with typical petroleum based and natural gas based commercial API Class III and IV base oils. Pressurized differential scanning calorimetry (PDSC), Rotary Bomb Oxidation Test (RBOT) and four-balls friction tester were used to evaluate the oxidation stability and lubrication performance of base oils under different working conditions. The sensitivity of different base oils to typical antioxidants and extreme pressure antiwear agents was compared. Specially, the composition and structure of CTL base oil are obviously different from GTL and mineral base oil. The coal-based CTL and mPAO base oils exhibit commendable viscosity-temperature properties, characteristics, coupled with low-temperature fluidity, fire safety, and minimal evaporation loss. The lubricating properties, oxidation stability and the sensitivity to extreme pressure antiwear agents of CTL are close to those of similar base oils. But the sensitivity of CTL to typical antioxidants is relatively poor. Besides, compared with commercial PAO base oil, mPAO has lower isomerization degree and fewer isomerization types. The oxidation stability and sensitivity to typical antioxidants of mPAO base oil are comparable with those of commercial PAO base oil, while its lubrication performance and sensitivity to typical extreme pressure antiwear agents are significantly better than those of commercial PAO base oil.

An accurate assessment of the stage-discharge relationship in open channel flows is necessary and important to the design and management of hydraulic structures and engineering in practical hydrosystems such as rivers and streams. While the flow structures and patterns at open channel junctions are interesting and have been widely studied in the literature, this paper focuses further on the effect of flow junctions on stage-discharge relationship at mountain river confluences. In this study, both the flume and physical model experiments are designed and performed carefully to test and analyze the complex flow structures and characteristics at river confluences with different configurations and hydraulic conditions. The impacts of the flow junctions on the traditional stage-discharge relationship are analyzed in this study. The results of this study are discussed in the paper for the understanding of flow structures at flow junctions and the design and management of hydraulic structures in river engineering.

Bipolar plates significantly contribute in the development of the polymer electrolyte membrane (PEM) fuel cells technology due to their ability to produce high electrical conductivity based on type of materials used. Mismatching of inappropriate materials and manufacture may lead to the inferior performance of PEM fuel cells. Hence, material development was determined crucial to balance the overall performance of PEM fuels including the mechanical properties and electrical conductivity of the materials. Studies on conductive polymer composites (CPCs) offered filler orientation as an alternative method to enhance the overall performance of bipolar plate. Filler orientations permit an excellent conductivity network formation while controlling the filler alignment based on required applications. This paper reviewed various studies of filler orientations including materials used and methods of manufacture of CPC materials for the effective development of bipolar plate.

The main objective of this investigation was to study the effect of organizational competencies development practices on turnover intentions and whether affective commitment explains this relationship. Another of the study's objectives was to test whether these relationships vary ac-cording to the generation to which the participant belongs. The study sample consisted of 2123 participants working in Portuguese organizations. The results indicate that organizational com-petencies development practices (training, individualized support, and functional rotation) nega-tively and significantly affect turnover intentions and that affective commitment mediates this re-lationship. However, these relationships vary according to the participant's generation. For Gen-eration Y and Generation X, this mediating effect is found in all dimensions of organizational competencies development practices. For the baby boomer generation, there is only a mediating effect of affective commitment in the relationship between individualized support and turnover intentions. These results indicate that human resources should consider the generation to which the participant belongs when implementing competencies development practices.

This paper reports a rational design of temperature-responsive nanofiber meshes with shape-memory effect. The meshes were fabricated by electrospinning a poly(ε-caprolactone) (PCL)-based polyurethane with different contents of soft and hard segments. The effects of PCL diol/hexamethylene diisocyanate (HDI)/1,4-butanediol (BD) molar ratio in terms of the contents of soft and hard segments on the shape-memory properties were investigated. Although the mechanical property improved with increasing hard segment ratio, optimal shape-memory properties were obtained with a PCL/HDI/BD molar ratio of 1:4:3. At a microscopic level, the original nanofibrous structure was easily deformed into a temporary shape, and recovered its original structure when the sample was reheated. A higher recovery rate (>89%) was achieved even when the mesh was deformed up to 400%. Finally, the nanofiber meshes were used to control the alignment of human mesenchymal stem cells (hMSCs). The hMSCs aligned well along the fiber orientation. The proposed nanofibrous meshes with the shape-memory effect have the potential to serve as in vitro platforms for the investigation of cell functions as well as implantable scaffolds for wound-healing applications.

Cells take decisions on their responses depending on the stimuli received by the surrounding extracellular environment, that provides the essential cues at the micro and the nano-lengthscales required for adhesion, orientation, proliferation and differentiation. In this study, discontinuous microcones on silicon (Si) and continuous microgrooves on polyethylene terephthalate (PET) substrates were fabricated via ultrashort-pulsed laser irradiation at various fluences, resulting in microstructures with different roughness and geometrical characteristics. The topographical models attained were specifically developed to imitate the guidance and alignment of Schwann cells for oriented axonal regrowth, towards nerve regeneration. At the same time, positive replicas of the silicon microstructures formed were successfully reproduced, via soft lithography, on the biodegradable polymer poly(lactide-co-glycolide) (PLGA). The anisotropic continuous (PET) and discontinuous (PLGA replicas) microstructured polymeric substrates were assessed in terms of their influence on the Schwann cells responses. It is shown that the developed micropatterned substrates enable control over the cellular adhesion, proliferation and orientation and are thus useful to engineer cell alignment in vitro. This property could be potentially useful in the fields of neural tissue engineering and for dynamic microenvironment systems that simulate in vivo conditions.

There are many uncertainties and risks in residential electricity consumption during the economic development. Knowledge of the relationship between residential electricity consumption and its key determinant—income—are important to the sustainable development of electric power industry. Using panel data from 30 provinces for the 1995-2012 period, this study investigates how residential electricity consumption changes as incomes increase in China. Previous studies typically used linear or quadratic double-logarithmic models imposing ex ante restrictions on the indistinct relationship between residential electricity consumption and income. Contrary to those models, we employed a reduced piecewise linear model that is self-adaptive and highly flexible and circumvents the problem of “prior restrictions.” Robust tests of different segment specifications and regression methods are performed to ensure the conservatism of the research. The results provide strong evidence that the income elasticity was approximately one, and it remained stable throughout the estimation period. The income threshold at which residential electricity consumption automatically remains stable or slows has not been reached. To ensure the sustainable development of the electric power industry, introducing higher energy efficiency standards for electrical appliances and improving income levels are vital. And government should emphasize electricity conservation in industrial sector rather than in residential sector.

Observe the synergistic effect and dose-effect relationship of Trimethoprim (TMP) on bactericidal activity with Flos Lonicerae in vitro. Microamount chessboard dilution method was conducted to determine the minimal inhibitory concentration (MIC) of Trimethoprim, Flos Lonicerae, as well as the combination of Trimethoprim and Flos Lonicerae separately against Staphylococcus aureus, Escherichia coli in vitro and Salmonella. The pour plate count method was used to determine the combined bactericidal activity of Flos Lonicerae combined with Different concentrations TMP. The results showed that the MIC values of the combination of Flos Lonicerae with TMP was much less than the MIC values of the independent use of Flos Lonicerae or TMP, The FIC values of the combination of Flos Lonicerae with TMP were between 0.5 and 1, there was additive effect between them. The bactericidal rates were fitted with least square method, the 95% confidence intervals of the optimal blending quantity about the combination of Flos Lonicerae with TMP on the test organisms were 231μg·mL^-1-249μg·mL^-1, 237μg·mL^-1-259μg·mL^-1, and 235 -259μg·mL^-1

This study aims to test a model linking destination image, perceived value, tourist satisfaction, and tourist loyalty. Based on a sample of 300 tourists travelling by car from the World Natural Heritage Site of Tianchi, China, a new model of destination image was explored and data were analysed using partial least squares structural equation modelling (PLS-SEM). The results show that perceived value and satisfaction are direct antecedents of destination loyalty. Above all, perceived value and tourist satisfaction mediate the relationship between destination image and loyalty. Finally, this study discusses the theoretical and management implications of the findings in order to boost the tourism industry in the context of car trips.

This paper investigates the impact of debt financing on dividend payments when they face the agency costs of free cash flow. Focusing on a sample of 120 firms listed on the Saudi Stock Exchange during the period 2011-2021. The study found a negative association between agency cost of free cash flow and dividend payment. More importantly, our research highlights the significant role of long-term debt in making more prudent use of free cash flow. The obligation to meet interest and principal payments acts as an incentive for them to steer clear of unprofitable expenses and risky investments. Concurrently, long-term debt imposes restrictive clauses in debt contracts, such as minimum dividend distribution requirements, which further encourage higher dividend payments. Since interest and debt repayments are fixed obligations, using free cash flow for dividend disbursement is considered a more profitable and beneficial approach for shareholders in the context of Saudi Arabia.

Some of the barriers preventing Virtual Reality (VR) from being widely adopted are the cost and unfamiliarity of VR systems. Here we propose that in many cases the specialized controllers shipped with most VR head-mounted displays can be replaced by a regular smartphone, cutting the cost of the system, and allowing users to interact in VR using a device they are already familiar with. To achieve this, we developed SmartVR Pointer, an approach that uses smartphones as a replacement for the specialized controllers for two essential operations in VR: selection and navigation by teleporting. In SmartVR Pointer a camera mounted on the head-mounted display (HMD) is tilted downwards so that it points to where the user will naturally be holding their phone in front of them. SmartVR Pointer supports three selection modalities: tracker-based,gaze-based, and combined/hybrid. In the tracker-based SmartVR pointer selection we use image-based tracking to track a QR code displayed on the phone screen and them map the phone’s position to a pointer shown within the field of view of the camera in the Virtual Environment. In the gaze-based selection modality the user places the pointer using their gaze and taps on the phone for selection. The combined technique is a hybrid between head-gaze-based interaction in VR and smartphone-based Augmented Reality. It allows the user to control a VR pointer that behaves like a mouse pointer by moving their smartphone to select objects within the virtual environment, and to interact with the selected objects using the smartphone’s touch screen. The touchscreen is used for selection and dragging. SmartVR Pointer is simple and requires no calibration and no complex hardware assembly or disassembly. We demonstrate successful interactive applications of SmartVR Pointer in a VR environment with a demo where the user navigates in the virtual environment using teleportation points on the floor and then solves a Tetris-style key-and-lock challenge.

Background: Exposure to chronic low levels of aflatoxin B1 (AFB1) contamination can lead to immune suppression and nutritional consequences that might greatly contributed in the increase of hepatocellular carcinoma (HCC). The toxicity of AFB1 is greatly vary between different population, affected by age, gender, and environmental factors. Material and subjects: Aflatoxin B1 (AFB1) was measured in 50 blood samples collected from non B, C hepatitis viruses and non CMV-Ab liver disease patients from different general hospitals and polyclinic in KSA during period 01-2013 to 06-2014. All Patients demonstrate elevation of ALT and AST with unknown etiology. Serum samples were obtained and kept at −20 °C for AFB1detection. Results: Out of the 50 blood samples, 38 demonstrate a detectable serum level of AFB1 while the remaining 12 patients were AFB1 negative and used as control participants. While AST was non-significantly different in AFB1 exposed patients, ALT was significantly higher in AFB1 positive samples compared to control AFB1-negative. AFB1 was positively correlated with AST and ALT as liver function enzymes and with age as a risk factor of long duration of AFB1 chronic exposure. Multiple linear regression analysis ascertained the association between AFB1 chronic exposure and ALT increase in liver dysfunction Saudi patients. Conclusion: Measurement of elevated ALT as marker of liver injury in AFB1 chronically exposed Saudi patients can help to avoid the future development of HCC. Moreover, early detection of AFB1 exposure, together with early vaccination against HBV and HCV can remove the synergistic effects of these two etiological factors and thus decrease the risk of developing liver cancer.

A relevant aspect in the epidemiology of Tegumentary Leishmaniasis (TL) is the Leishmania parasites carrying a viral endosymbiont Leishmania RNA Virus 1 (LRV1), a dsRNA virus. Leishmania parasites carrying LRV1 are prone to causing more severe TL symptoms, increasing the likelihood of unfavorable clinical outcomes. LRV1 has been observed in cultured strains of five L. (Viannia) species, and host specificity was suggested when studying LRV1 from L. braziliensis and L. guyanensis strains. The coevolution hypothesis of LRV1 and Leishmania was based on phylogenetic analyses, implying an association between LRV1 genotypes, Leishmania species, and their geographic origins. This study aimed to investigate LRV1 specificity to Leishmania (Viannia) species hosts by analyzing LRV1 from L. (Viannia) species. To this end, LRV1 was screened in L. (Viannia) species other than L. braziliensis or L. guyanensis, and it was detected in 11 out of 15 L. naiffi and in 2 out of 4 L. shawi. Phylogenetic analyses based on partial LRV1 genomic sequencing supported the hypothesis of host specificity, as LRV1 clustered according to their respective Leishmania species hosts. These findings underscore the importance of investigating Leishmania and LRV1 coevolution and its impact on Leishmania (Viannia) species dispersion and pathogenesis in the American Continent.

The main objective of this paper is to assess pro-environmental behavior, climate change perception, anxiety, hope and despair in different political orientations. Specific aims included to validate all the instruments; to assess whether the factor structure of the scales were valid across political orientations; to evaluate their reliability; to assess differences concerning age, gender and political orientation; to know the variables that explain pro-environment behavior; and to evaluate the moderating role of climate change perception, despair and hope in the relationship between climate change anxiety and pro-environmental behavior. Confirmatory factor analysis (CFAs), multi-group CFAs (to measurement invariance), multiple linear regressions and moderations were performed. Results showed that pro-environment behavior and climate change hope achieved the four levels of invariance across different political orientations; climate change anxiety achieved the three first levels of invariance; climate change perception and climate change despair achieved configural invariance. Climate change anxiety personal experience, climate change perception total, reality and consequences present higher values in left political orientation that in right or center. Climate change anxiety variables contribute most to explaining pro-environmental behaviors. Hope, despair and climate change perception consequences moderate de relationship between climate change anxiety and pro-environment behavior. These results open up new avenues of investigation, namely, to understand why high levels of anxiety lead to more pro-environment al behaviors.

A testable theoretical model is presented, proposing which brain parts and mechanisms are responsible for the nature and the nurture components of all human sexual orientations. The model integrates observations from humans and a wide range of animals. If validated, the model would provide a proximate explanation of the biological substrates of all sexual orientations. The basic assumptions of the model are: (1) Children learn automatically and subconsciously in non-sexual conditioning experiences cues for recognizing sexual mates. That skill emerges at puberty. (2) Adults in the child’s surroundings act as innocuous, unaware role-models that provide the learned cues for recognizing mates. (3) Voices of men and women serve as the innate, primary unconditioned stimuli (US) in that learning process. (4) The hypothalamus is the main area that elicits the signals of the unconditioned responses (UR). Those signals trigger the learning of the associated conditioned stimuli (CS) broadcasted by the role-models. (5) The amygdala, base nuclei of the Stria Terminalis (bnST) and hypothalamus play in humans similar roles to those they play in the other species. (6) The human medial geniculate nucleus (MGN) plays the roles played by the olfactory bulbs in rodents. (7) Detectors of innate primary US and activators of the unconditioned sexual responses (UR) are located in the MGN, Amygdala, bnST and Hypothalamus Axis (MASHA). The learned conditioned stimuli (CS) are recorded in the MASHA and in cortical areas. (8) The innate US-UR connections vary across three groups of children. In the first group, only men’s voices trigger the UR. In the second group, only women’s voices trigger the UR, and in a third group each voice can trigger the UR. That determines the learned cues. The first group will be attracted at puberty only to men, the second only to women, and the third group to both.

Direct georeferencing of airborne pushbroom scanner data usually suffers from the limited precision of navigation sensors onboard of the aircraft. The bundle adjustment of images and orientation parameters, used to perform geocorrection of frame images during the post-processing phase, cannot be used for pushbroom cameras without difficulties: it relies on matching corresponding points between scan lines, which is not feasible in the absence of sufficient overlap and texture information. We address this georeferencing problem by equipping our aircraft with both a frame camera and a pushbroom scanner: the frame images and the navigation parameters measured by a couple GPS/Inertial Measurement Unit (IMU) are input to a bundle adjustment algorithm; the output orientation parameters are used to project the scan lines on a Digital Elevation Model (DEM) and on an orthophoto generated during the bundle adjustement step; using the image feature matching algorithm Speeded Up Robust Features (SURF), corresponding points between the image formed by the projected scan lines and the orthophoto are matched, and through a least-squares method, the boresight between the two cameras is estimated and included in the calculation of the projection; finally, using Particle Image Velocimetry (PIV) on the gradient image, the projection is deformed into a final image that fits the geometry of the orthophoto. We apply this algorithm to five test acquisitions over Lake Geneva region (Switzerland) and Lake Baikal region (Russia). The results are quantified in terms of Root Mean Square Error (RMSE) between matching points of the RGB orthophoto and the pushbroom projection. From a first projection where the Interior Orientation Parameters (IOP) are known with limited precision and the RMSE goes up to 41 pixels, our geocorrection estimates IOP, boresight and Exterior Orientation Parameters (EOP) and produces a new projection which RMSE with the reference orthophoto is around two pixels.

In recent years, the AHRS has become an important research area. In order to improve the orientation measurement accuracy of AHRS, this paper first expounds the algorithm principle of the AHRS. Then, aiming at the problem of poor stability of the traditional gradient descent method under high dynamics or large magnetic field interference, a gain-scheduled anti-interference AHRS orientation algorithm is designed. By using the switching architecture designed with this algorithm for gain scheduling, it can ensure stable performance while being subjected to apparent acceleration and ferromagnetic interference. Finally, experimental verification is conducted, and the experimental results show that: in the presence of interference, the roll angle error is 0.0350°, the pitch angle error is 0.0277°, and the yaw angle error is 0.9611°, thereby verifying the strong anti-interference performance of the gain-scheduled AHRS orientation algorithm proposed in this paper.

This article proposes a new photovoltaic (PV) solar tracker design based on the advantage that installation latitude offers according to efficiency in function of orientation (EFO) of PVs. First, is described a methodology to let incorporate a low-precision, low-cost and high-availability solar tracking mechanism and control system. The design methodology considers the installation location (latitude and azimuth) as a starting point for establishing an adequate angular range of EFO, simultaneity the aspects of available technology and the knowledge accords to developer. Finally, the design technique is experimentally validated by the implementation of a solar tracker at latitude of 28° longitude of 109° and evaluates the efficiency on a specific day. According to result the feasibility of this type of solar tracker for latitudes close to or greater than 30° is highlighted, given that this tracking system costs 30% less than traditional commercial systems as slew drive with its incorporation of lower-resolution azimuth tracking mechanisms. It also increases collection efficiency by 26%, just as continuous or time-based dual-axis solar trackers do, without the more complex controls and mechanisms of these designs.

PM2.5 levels affect human health. However, its relationship with other health vulnerability determinants has not been sufficiently explored. Furthermore, public access to PM2.5 datasets, linkable to health statistics, is not available. We built a georeferenced database and map of annual mean PM2.5 emissions and air concentrations values in Argentina in 2010 and explored their correlations with other health vulnerability determinants. We obtained data for montlhy PM2.5 values emissions and air concentrations in Argentina from public sources. We evaluated health vulnerability by the “Sanitary Vulnerability Index (SVI)”. Non-parametric correlations between variables below 0.22, corresponding to a R2=5%, were deemed meaningless. PM2.5 emissions concentrated in urban and intensive agricultural areas of Argentina. PM2.5 air concentrations were acceptable (≤10 microg/m3) in only 15% of the Argentinean territory, respectively. The correlation between air concentration of PM2.5 and human emission was meaningless. Emissions, but not air concentrations correlated >0.22 with indicators of human activity. SVI correlated meaninglessly with PM2.5 air concentration. In conclusion, PM2.5 levels were above acceptable levels in 85% of the Argentinian territory in 2010. The lack of meaningful correlations between PM2.5 and SVI suggest that these coefficients might be used in combination to assess health vulnerability. Further research is warranted.

Background: In recent years, whole blood parameters and derivatives have been used as prognostic criteria in the course of the disease in various diseases. The prognostic nutritional index (PNI), the systemic immune-inflammation index (SII), the neutrophil-lymphocyte ratio (NLR) have been adapted as an indicator of inflammation and have been widely studied to define the severity of inflammation in some diseases. The aim of this study was to evaluate the relationship between parameters such as NLR, SII, PNI, controlling nutritional status (CONUT) score, nutritional risk index (NRI) and with immunonutrition status and disease activity in patients with ischemic stroke of small vessel, large vessel and other etiologies. Methods: We retrospectively evaluated the records of 1454 consecutive ischemic stroke patients hospitalized in the emergency department of Gaziosmanpasa Education and Research Hospital from 2019 to 2023. Results: Of the 1350 SVO patients included in the study, 58.8% had small vessel, 29.3% had large vessel and 11.9% had other etiologies. There was a significant difference between the 3 etiology groups for PNI and CONUT. The median PNI was 47.03 (41.33-52.85) in the other etiology group, 35.29 (33.69-37.25) in the small vessel group, and 34.11 (30.23-36.87) in the large vessel group. The CONUT median was 5(5-6) in the small vessel group, 5(4-6) in the large vessel group and 4(4-4) in the other etiology group. In addition, CONUT and PNI were also found to be independent risk factors for death. A negative significant correlation was observed between PNI and NLR (r:-0.692), SII (r:-0.591), CONUT (r:-0.685). Significant correlations were observed between CONUT and NLR (r:0.402), SII (r:0.312). Conclusion: PNI and SII were significantly associated with disease activity. PNI, CONUT and NRI as a more accurate prognostic indicator of nutritional status in patients with ischemic stroke of small vessel, large vessel and other etiologies. NLR and SII may be important predictive markers in the course and prognosis of stroke.

Document deskewing is a fundamental problem in document image processing. While existing methods have limitations, such as Hough Line Transformation that can deskew images upside down, and Deep Learning models that require huge amounts of human labour and computational resources and still fail to deskew while taking care of orientation, OCR-based methods also struggle to read text when it is tilted. In this paper, we propose a novel, simple, cost-effective deep learning method for fixing the skew and orientation of documents. Our approach reduces the search space for the machine learning model to predict whether an image is upside down or not, avoiding the huge search space of predicting an angle between 0 and 360. We finetuned a MobileNetV2 model, which was pre-trained on imagenet, using only 200 images and achieve good results. This method is useful for automation-based tasks, such as data extraction using OCR technology, and can greatly reduce manual labour.

The present work sets out the evaluation of composite laminates through optimization objective functions. Genetic Algorithms (GA), as well as Simulated Annealing (SA), were performed in order to determine the optimal ply orientations of a fiber-reinforced polymer laminate for three given load cases: 1) in-plane loads, 2) combined moments, and 3) in-plane loads and combined moments. It searches the optimal orientation layup, which fulfills at the same time both the maximum strain criterion and the Tsai-Wu failure criterion. Construction of an objective function based on the strains and the stresses involves a minimization process to deformations and a maximization of the safety factor. For the first load case, the initial solution is [±45/0/90/±45]s, and the best solution is [(45/135)2/452]s. For the second load case, [-45/45/45/-45/0/90]s is the initial layup sequence, then the best solution obtained is [(45/-45)2/452]s, where plies at 0° and 90º are not necessary even when axial loads are applied. For the third study case, the original layup sequence is [0/45/-45/45/0/90]s; meanwhile, the best solution calculated is [21/24/145/140/45/49]s. An interesting observation is that each pair of layers has a 5º gap. The simulations show that the qualitative results from the GA are better than the SA, but with a significantly higher computational cost. These kinds of computational tools are expected to be used as a reference guide for an optimal fiber configuration with respect to the common orientations used when composite laminates are designed for a structural application.

The effects of build orientation and heat treatment on the crack growth behavior of 316L stainless steel (SS) fabricated via a selective laser melting (SLM) additive manufacturing process were investigated. Significant growth of available research results of additively manufactured metallic parts still needs to be improved. The most important issue connected with properties after additive manufacturing is properties high anisotropy, especially from the fatigue point of view. The research included crack growth behavior of additively manufactured 316L in comparison to conventionally made reference material. Both groups of samples were obtained using precipitation heat treatment. Different build orientation in additively manufactured samples and rolling direction in reference samples were taken into account as well. Precipitation heat treatment of additively manufactured parts allowed to reach similar microstructure and tensile properties to elements conventionally made. The heat treatment positively affected fatigue properties. Additionally, precipitation heat treatment of additively manufactured elements significantly affected the reduction of fatigue cracking velocity and changed the fatigue cracking mechanism.

As a combination of both concepts of innovation and environmental development, green innovation is of great significance to the sustainable development of the country and industry. Previous literatures have found the separate roles of green entrepreneurial orientation and inter-organizational learning in understanding green innovation issues. However, few studies have done a comprehensive analysis of integrating three streams of research: green entrepreneurial orientation, green innovation and supply chain learning capability. Based on the resource-based view and dynamic capability theory, we examine the direct of green entrepreneurial orientation on green innovation as well as indirect effect through the mediation of supply chain learning capability. Meanwhile, an empirical data set of 228 manufacturing companies in China (Shaanxi, Guangdong, Hebei, Jiangsu, and Shandong) was used to test our hypotheses. Findings from our empirical study suggest that supply chain learning capability partially mediates the positive relationships between green entrepreneurial orientation and its two consequences—green incremental innovation and green radical innovation. In addition, this research implies that when enterprise has a strong green entrepreneurial orientation, the enterprise should make an effort to enhance the level of supply chain learning capability so as to fully develop their green innovation.

Atherosclerosis, a complex metabolic-immune disease characterized by a chronic inflammation driven by the buildup of lipid-rich plaques within arterial walls, has emerged as a pivotal factor in the intricate interplay between cancer and cardiovascular disease. This bidirectional relationship, marked by shared risk factors and pathophysiological mechanisms, underscores the need for a comprehensive understanding of how these two formidable health challenges intersect and influence each other. Cancer and its treatments can contribute to the progression of atherosclerosis while atherosclerosis with its inflammatory microenvironment can exert profound effects on cancer development and outcomes. Both cancer and cardiovascular disease involve intricate interactions between general and personal exposomes. In this review we want to summarize the state-of-the-art of translational data and try to show how oncologic studies on cardiotoxicity can broaden our knowledge of crucial pathways in cardiovascular biology with a positive impact on precision cardiology and cardioncology.

Background. Depression and anxiety and its association with sexual orientation in Latvia is un-derstudied. Outcomes. Kinsey scale, primary outcomes for mental health disturbances were defined as per-son`s subjective feeling of depression and anxiety. Materials and Methods. Participants aged 18-30 year old (n=503) was asked to do a self-administered anonymous web-based survey regarding social and family status, sexual iden-tification and behaviour, violence experience and mental health information. To describe person`s sexual orientation Kinsey scale was used. Prevalence of depression and anxiety, univariate and multivariate regression analysis was performed to measure relations between investigated fac-tors. Results. A total of 503 participants (i.e., 365 females, 133 males, 5 others) were included in the study. Mean (SD) age of participants was 23.0 (3.7) years. Mean (SD) value on the Kinsey scale was 1.4 (1.8) and median (IQR) value was 1.0 (0-2.0) where 1 is defined as ‘mostly heterosexual, only slightly homosexual’ person and 2 is ‘mostly heterosexual, but more than slightly homosexual’. Prevalence of persons reported violence experience was 20.3%, anxiety 56.3% and depression 37.6%. Logistic regression analysis showed that experience of violence was associated with higher odds of developing anxiety and depression (OR: 2.6 [95% CI: 1.7-4.0] and 2.4 [95% CI: 1.5-3.9], respectively). Being in relationship was associated with higher odds of developing anxiety (OR: 2.8[95% CI: 1.3-6.3]). Male sex and income 1001-2000 euros a month were associated with lower odds of developing anxiety (OR: 0.4 [95% CI: 0.2-0.5] and aOR: 0.3 [95% CI: 0.1-0.8], respectively). Sexual orientation showed no significant value in association with anxiety and depression (OR: 1.1 [95% CI: 1.0-1.2] and OR: 1.1 [95% CI: 1.02-1.2], respectively). Conclusions. In our study, the significant factors for developing depression and anxiety were experiencing violence, being female, being in a relationship, and having no income, while sexual orientation showed no significance in relation to depression and anxiety.

Food insecurity remains a critical challenge in developing countries like Ethiopia. Majority of its population derive their livelihood from agriculture characterized by mixed farming systems. Smallholder farmers the principal actors of agriculture are also facing a rapidly increasing population and urbanization had been unable to be self-sufficient in food. This paper examines the role of commercialization on food security and its determinants in rural settings. We used cross-sectional data from 295 households randomly selected in northwest Ethiopia. Results from bivariate Tobit regression revealed both crop and livestock commercialization improves household food security but in quite different ways. The income from crop sales was instrumental in allowing households to buy additional foods while livestock sales foster crop diversity for own consumption by allowing them to purchase nonfood items. Thus, agriculture-food security nexus may not require the production systems to be subsistent. Improving commercialization with better access to off-farm employment and institutional services (credit and market infrastructure), and enhanced awareness of the extension towards promoting commercialization and diversified food consumption seem to be more promising. The research paper concludes commercialization is vital not just for economic growth and food security, but also for the smallholder agriculture in providing additional nutrition.

Glass fibers slowly dissolve and age when exposed to water molecules. Such a phenomenon also occurs when glass fibers are inside fiber-reinforced composites protected by the matrix. This en-vironmental aging results in the deterioration of the mechanical properties of the composite. In structural applications, GFRPs are continuously exposed to water environments for decades (typically design lifetime is around 25 years or even more). During their lifetime, these materials are affected by various temperatures, pH acidity levels, mechanical loads, and the synergy of these factors. The rate of the degradation process depends on the nature of glass, sizing, fiber orientation, and environmental factors such as acidity, temperature, and mechanical stress. In this work, degradation of typical industrial grade R-glass fibers, when inside an epoxy fiber-reinforced composite, is studied experimentally and computationally. A Dissolving Cylinder Zero-Order Kinetic (DCZOK) model was applied and could describe the long-term dissolution of glass composites, considering the influence of fiber orientation (hoop vs transverse), pH (1.7, 4.0, 5.7, 7.0, and 10.0), and temperature (20, 40, 60, and 80 °C). The limitations of the DCZOK model and effects of sizing protection, accumulation of degradation products inside the composite, and water availability were discussed. Experimentally dissolution was measured using ICP-MS. Like for the fibers, for GFRPs also, the temperature showed an Arrhenius-type influence on the ki-netics, increasing the rate of dissolution exponentially with increasing temperature. Similar to fibers, GFRPs showed a hyperbolic dependence on pH. The model was able to capture all of these effects, and the limitations were addressed.

In recent years, excessive heat in the urban texture has become the main problem in the humid and calm wind city of Babolsar with high density, especially in high-rise areas. Therefore, in order to create comfort in this region, it is necessary to establish and continue the wind circulation in space with an environmentally compatible and optimal configuration. The study applies combination of literature, field measurement, experimental validation of CFD simulation output, and comparative analysis. After field measurement and validation of FLOW-3D simulation software (V11.2.2), the relationship between these parameters (height, the width of passages, enclosure between buildings, and buildings' orientation) will be studied which affects the wind’s velocity and direction. The factors of the buildings' orientation and enclosure based on the passages' width have opposite reactions in the direction of the prevailing wind especially from perpendicular side. In this study, two effective factors are on wind velocity: 1- The orientation of the buildings towards the wind flow by creating permeability 2- Reducing the enclosure by increasing the width of the passage's perpendicular to the wind flow (w '= 3w, E' = 0.33E). According to the theoretical and practical study, first, the creation of permeability in the body of the block and the separation of buildings instead of aggregation has been studied, and then reducing the confinement of streets perpendicular to the wind flow has been discussed as effective solutions to improve the wind velocity and circulation between the urban environment.

Polyolefin fibre reinforced concrete (PFRC) has become an attractive alternative to steel for the reinforcement of concrete elements mainly due to its chemical stability and the residual strengths that can be reached with lower weights. The use of polyolefin fibres can meet the requirements in the standards, although the main constitutive relations are based on the experience with steel fibres. Therefore, the structural contributions of the fibres should be assessed by inverse analysis. In this study, the fibre dosage has been fixed at 6kg/m³ and both self-compacting concrete and conventional concrete have been used to compare the influence of the positioning of the fibres. An idealized homogeneous distribution of the fibres with such fibres crossing from side to side of the specimen has been added to self-compacting concrete. The experimental results of three-point bending tests on notched specimens have been reproduced by using the cohesive crack approach. Hence, the constitutive relations were found. The significance of this research relies on the verification of the formulations found to build the constitutive relations. Moreover, with these results it is possible to establish the higher threshold of the performance of PFRC and the difficulties of limiting the first unloading branch typical of fracture tests of PFRC.

This study aimed to conduct a cross-cultural adaptation of the development of the cat-owner/dog-owner relationship scales. The method encompassed several stages: conceptual, item, semantic, operational, measurement, and functional equivalence. Processes included translations, synthesis of translations, back-translations, consensus on the English versions, external evaluation by the original authors, expert committee evaluation, and pre-tests. The study involved surveying 342 pet owners throughout Brazil using a 20-item questionnaire. Data analyses utilized confirmatory factor analysis, covariance-based modeling, and multigroup analysis. The techniques confirmed that the scale preserved its psychometric properties and showed no variance between dog and cat owners, indicating that the measured constructs are universal and unaffected by specific cultural nuances. Hence, the cross-cultural adaptation and validation of the scale facilitate applying and testing concepts and measures in diverse contexts, enriching our understanding of the dynamics between owners and their pets (dogs and cats) in different living situations. In addition, this research holds particular significance in Brazil, given the country’s vast cultural diversity.

Honey bees (Apis mellifera L.) express complex behavioral patterns (aggressiveness) to exhibit defensive mechanisms for their survival. Their phenotypic expression of aggressive behavior is influenced by internal and external stimuli. Knowledge of this behavior is recently important though beekeepers are still faced with the challenges of selecting aggressive and less-aggressive bred lines. Field evaluation of aggressiveness among bred lines of honey bees is required to overcome the challenges. Chemical cues (alarm pheromone and isopentyl acetate mixed with paraffin oil), physical and visual stimuli (dark leather suede, colony marbling and suede jiggling) were used to evaluate aggressiveness and orientation among five bred lines of honeybee colonies. Our results showed that both chemical assays recruited bees but the time of recruitment was significantly lower for alarm pheromone. Honeybees’ response to both assays culminated to stings which differed among bred lines for alarm pheromone and paraffin when colonies were marbled. Honeybee aggression varied among bred lines and was higher in more aggressive bred lines compared to less-aggressive bred lines. Our findings suggest that it is crucial to repeatedly evaluate orientation aggressiveness at the colony level and among bred lines when selecting breeding colonies.

Background and Objectives: The purpose of the study was to analyze the relationships between several clinical and biological factors, but also the tumor topography and surgical strategies used in patients with colorectal cancer. Materials and Methods: We designed an analytical, observational, retrospective study that included patients admitted to our emergency surgical department and diagnosed with colorectal cancer. The study group inclusion criteria were: patients admitted during 2020-2022; patients diagnosed with colorectal cancer (including the ileocecal valve); patients who benefited from a surgical procedure, either in emergency or elective. Results: In our study group, consisting of 153 patients, we accounted for 56.9% male patients and 43.1% female patients. The most common clinical manifestations were pain (73.2% of the study group), followed by abdominal distension (69.3% of the study group) and absence of intestinal transit (38.6% of the study group). A number of 69 patients were operated in emergency (45.1%), while 84 patients (54.9%) benefited from elective surgery. The most frequent topography of the tumor was the sigmoid colon, with 19.60% of the patients, followed by the colorectal junction, with 15.68% of the patients and superior rectum and inferior rectum, with 11.11% of the patients in each subcategory. The most frequent type of procedure was right hemicolectomy (21.6% of the study group), followed by rectosigmoid resection (20.9% of the study group). The surgical procedure was finished by performing an anastomosis in 49% of the patients, an ostomy in 43.1% of the patients, while for 7.8% of the patients, a tumoral biopsy was performed. Conclusions: Colorectal cancer remains one of the most frequent cancers in the world, with a heavy burden that involves high mortality, alterations in the quality of life of the patients and their families, and also the financial costs of the medical systems.

Background: Alzheimer’s disease (AD), the most threatening neurodegenerative diseases, is characterized by the loss of memory and language function, an unbalanced perception of space and other cognitive and physical manifestations. Pathology of the AD is characterized by neuronal loss, and the extensive distribution of senile plaques and neurofibrillary tangles (NFTs). The role of environment and the diet in the AD is being studied actively, and nutrition is certainly one of the main factors playing a prominent role in the prevention of neurodegenerative diseases. In this context, the relationship between dementia and wine use/abuse has received increased research interest in recent times, with varying and often conflicting results. Scope and approach: This review aims to critically summarize the most recent studies conducted to clarify the relationship between wine drinking and AD, as well as whether effects are influenced by quantity and/or frequency of drinking. Key findings and Conclusion: Overall, based on the interpretation of various studies, it can be concluded that there is no indication that light to moderate alcohol drinking is detrimental to cognition and dementia, and it is not possible to define whether alcohol could be used as a means to reduce risk of developing AD.

Social customer relationship management (SCRM) is a new philosophy influencing the relationship between customer and organization, where the customer gets opportunity to control relationship through social media. The paper aims on (a) identification of current level of SCRM and also on (b) influence of basic organizational characteristics on SCRM level. The data were gathered through the questionnaire distributed in 362 organization headquartered in the Czech Republic. The questionnaire comprised 54 questions focusing on the significance of marketing and CRM practices, establishing a relationship with the customer, online communities, the use of social media in marketing, and acquiring and managing information. The majority of questions were scalable and used typical five-level Likert scale. Results showed that larger firms more often set up their own online communities and manage them strategically, moreover they are able to manage information better. Contrariwise, small sized organizations use social networks as a way to establish communication with the customer more than large sized entities. Use of social media for marketing purposes is significantly higher in organizations oriented on consumer markets than on business markets.

Introduction Cone Beam Computed Tomography (CBCT) scans should be digitally oriented using a reference plane before being evaluated for patient growth and treatment outcome. Current orientation planes are usually dependent on the Porion points. Using more reliable landmarks than the Porion, we introduce the Acta plane and investigate its reliability as an alternative reference plane for cases in which the Porion point is inaccessible. Methods To test its reliability, a dental student and an orthodontist located sixteen skeletal and dental landmarks in sixteen CBCT scans, before and after reorientation. Also, four measurements were calculated based on these landmarks’ coordinates. The reorientation of these CBCT scans with the Acta plane was done by another dental student. Intraclass Correlation Coefficient (ICC) was calculated before and after orientation, intra- and inter-examiner. The data were tested for significance through the Shapiro Wilk test with a threshold set at 0.05. Through the ICC variation of the points’ coordinates, this article also evaluated the reliability of this plane with the t-paired and exact-sign tests. Results: The identification of landmarks was more reliable in the reoriented CBCT images than in the original images, with a significant increase of 0.012 in the median of the ICC. Linear and angular measures showed no significant differences between groups. Conclusion This plane is a reliable alternative for the orientation of CBCT images. The design of the Acta plane might allow the use of a smaller field of view and, consequently, a reduction in the radiation dose.

Lack of due attention to the orientation of streets and establishment of urban blocks without regard for climatic characteristics and conditions of the environment have an adverse effect on thermal comfort in open urban spaces. Construction of new settlements without taking into account climatic requirements undermines thermal comfort for pedestrians and other users, especially in cold regions. Considering the coldness of the region under study and the significance of the orientation of streets in absorbing radiation and providing heat to outdoor urban spaces, this study investigates the effect of the orientation of streets on microclimatic comfort in one of the residential towns of Hamadan City in Iran. For this purpose, microclimate simulation was performed using ENVI-met software. A residential block with four different orientations (the most common orientations of its surrounding buildings) were simulated in the coldest day of winter and the hottest day of summer. The results suggest that streets have different thermal behavior in different orientations. Orientation affects mean radiant temperature (Tmrt), the duration of exposure to direct sunlight, wind speed, and physiological equivalent temperature (PET), which are all important factors in thermal comfort. Based on these findings, north-south streets in Hamedan receive more radiant temperature during winter compared to other simulated orientations and provide more desirable thermal comfort. The average PET value on a winter day at a point on the north-south passage was 4.5-8 °C warmer than other orientations. In summer, streets with intercardinal orientations (i.e., northeast-southwest and northwest-southeast) provided the lowest PET (about 2 °C cooler than other orientations) and better thermal comfort

This study presents a novel approach for quantifying the dynamics of monthly hydraulic geometry relationships in the Jingjiang reach of the Yangtze River by integrating leaf area index (LAI) data as an indicator of riparian vegetation. A comprehensive system of ordinary differential equations (ODEs) couples traditional power-law hydraulic geometry equations with LAI, capturing the influence of erosion control on channel morphology. The periodic delayed response theory and automatic differentiation techniques are employed to enhance the modeling framework's capabilities. Calibration and verification demonstrate the models' effectiveness in capturing overall trends in discharge, width, and depth dynamics, outperforming traditional constant-parameter approaches. However, model predictive abilities are limited under extreme climate conditions due to training on normal climate data. Key assumptions, including the periodic delayed response theory's neglect of peak discharges, simplified representation of artificial cut-offs, and reliance on remotely sensed data with limited local validation, introduce uncertainties. The proposed modeling framework shows potential for broader application to other river systems with appropriate adjustments. Future research could incorporate additional environmental factors, integrate models across scales, couple with advanced simulation techniques, and expand stability assessments beyond the riverbed index. By addressing related challenges, this integrated approach lays a foundation for enhancing understanding of river morphodynamics and channel stability.

Conjugated polymers (CPs) offer potentials for sustainable semiconductor devices due to their low cost, and inherent molecular self-assembly. Enhanced crystallinity and molecular orientation in thin films of solution-processable CPs have significantly improved organic electronic device per-formance. In this work, three methods namely spin-coating, dip-coating, and unidirectional float-ing-film transfer method (UFTM) were utilized with their parametric optimization for fabricating RR-P3HT films. These films were then utilized for their characterization via optical and micro-structural analysis to elucidate dominant roles of molecular orientation, and crystallinity in con-trolling charge transport in organic field-effect transistors (OFETs). OFETs fabricated by RR-P3HT thin films using spin-coating and dip-coating displayed field-effect mobility (μ) of 8.0 × 10-4 cm2V-1s-1 and 1.3 × 10-3 cm2V-1s-1, respectively. This two-time enhancement in (µ for dip-coated films was attributed to its enhanced crystallinity. Interestingly, UFTM films based OFETs demon-strated μ of 7.0 × 10-2 cm2V-1s-1, >100 times increment as compared to its spin-coated counterpart This superior device performance is attributed to synergistic influence of higher crystallinity and molecular orientation. Since the crystallinity of dip-coated and UFTM-thin films are similar ~50 times improved µ of UFTM thin films suggest a dominant role of molecular orientation as com-pared to crystallinity in controlling the charge transport.

The sTetro is a stair cleaning robot which can climb the staircase with its shapeshifting capabilities. As this robot is intended to traverse multi-floor environment autonomously, hence its localization/positioning information is an essential component of the overall system. Usually, the indoor mobile robots rely on some external system for localization information, e.g., WiFi, UWB, vision, RFID signals, or indoor Global Positioning System (GPS). This requires the installation of additional hardware and/or modification of the working environment for precise positioning information of the mobile platform. As the dimensions of the staircase are known a priori, this knowledge can be used to localize the sTetro robot on the stairs. In this article, the geometry of the staircase has been exploited to localize the robot in 3D space with measurements from the onboard time-of-flight (ToF) range sensors only. The heading angle of the robot is also estimated with two ToF sensors installed in front of the sTetro robot. Results achieved by conducting experiments on real robot prove the efficacy of the proposed approach.

In urban areas like Chicago, daily life extends above ground level due to prevalence of high-rise buildings where residents and commuters live and work. This study examines the variation in fine particulate matter (PM2.5) concentrations across building stories. PM2.5 levels were measured using PurpleAir sensors, installed between April 8 and May 7, 2023, on floors one, four, six, and nine of an office building in Chicago. Additionally, data were collected from a public outdoor PurpleAir sensor on the fourteenth floor of a condominium located 800 meters away. Results show that outdoor PM2.5 concentrations peak at 14 meters height, then decline by 0.11 μg/m3 per meter elevation, especially noticeable from midnight to 8 AM under stable atmospheric conditions. Indoor PM2.5 concentrations increase steadily by 0.02 μg/m3 per meter elevation, particularly during peak work hours, likely caused by greater infiltration rates at higher floors. Both outdoor and indoor concentrations peak around noon. We find that indoor and outdoor PM2.5 are positively correlated, with indoor levels consistently remaining lower than outside levels. These findings align with previous research suggesting decreasing outdoor air pollution concentrations with increasing height. The study informs decision-making by community members and policymakers regarding air pollution exposure in urban settings.

Facial expressions play a key role in interpersonal communication when it comes to negotiating our emotions and intentions, as well as interpreting those of others. Research has shown that we can connect to other people better when we exhibit signs of empathy and facial mimicry. However, the relationship between empathy and facial mimicry is still debated. Among the factors contributing to the difference in results across existing studies is the use of different instruments for measuring both empathy and facial mimicry, as well as often ignoring the differences across various demographic groups. This study first looks at the differences in empathetic abilities of people across different demographic groups based on gender, ethnicity and age. The empathetic ability is measured based on the Empathy Quotient capturing a balanced representation of both emotional and cognitive empathy. Using statistical and machine learning methods, the study then investigates the correlation between the empathetic ability and facial mimicry of subjects in response to images portraying different emotions displayed on a computer screen. Unlike the existing studies measuring facial mimicry using electromyography, this study employs a technology detecting facial expressions based on video capture and deep learning. This choice was made in the context of increased online communication during and post the COVID-19 pandemic. The results of this study confirm the previously reported difference in the empathetic ability between females and males. However, no significant difference in the empathetic ability was found across different age and ethnic groups. Furthermore, no strong correlation was found between empathy and facial reactions to faces portraying different emotions shown on a computer screen. Overall, the results of this study can be used to inform the design of online communication technologies and tools for training empathy team leaders, educators, social, and health care providers.

This paper reports on the changing dynamics of a small town’s social-ecological system (SES) concerning oil and gas industry boom-bust economic cycles and both the vulnerability and resilience of the town over the past 30 years. With the goal to understand how resource-based single industry impact social-ecological systems, we developed indicators of human and environmental well-being and assessed them. Seven indicators include labor force distribution, education, oil price, household income, water quality, air quality, and land cover land use. Over this period, Drayton Valley, Canada quadrupled in size, with more than 20% of the population working in the oil and gas sector. Median income rose to 42% above the national average despite the population lagging national benchmarks for educational attainment. There have also been dramatic fluctuations in levels of fluoride, phosphorus, and other chemicals in water quality samples, implying a correlation with fossil fuel extractive activities over this period. Land cover land use change analysis shows a decreased area of water bodies, wetland, and forests, and increased built capital and agricultural land. While economic boom cycles have led to cash inflows, an exclusive focus on the benefits of the oil and gas industry may leave those dependent on the industry vulnerable to social and environmental risk factors during bust cycles that are beyond their control in the everchanging global oil economy. This phenomenon which has been referred to as the “resource curse” suggests the need to anticipate cyclical (or more sustained) periods of low levels of oil and gas production. These results suggest that single boom-bust economies impact every aspect of social-ecological systems. Therefore, a sustainable development plan that comprehensively considers not only economic growth, but also diversification, environment protection, and strategic land use planning is indispensable to ensure the long-term development of communities that depend upon extractive industries.

The number of citations that a paper has received is the most commonly used indicator to measure the quality of research. Researchers, journals, and universities want to receive more citations for their scholarly publications to increase their h-index, impact factor, and ranking respectively. In this paper, we tried to analyses the effect of the number of available Google Scholar versions of a paper on citations count. We analyzed 10,162 papers which are published in Scopus database in year 2010 by Malaysian top five universities. Then we developed a software to collect the number of citations and versions of each paper from Google Scholar automatically. The result of spearman correlation coefficient revealed that there is positive significant association between the number of Google Scholar versions of a paper and the number of times a paper has been cited.

Direct measurement of strain within muscle is important for understanding muscle function in health and disease. Current technology (kinematics, dynamometry, electromyography) provides limited ability to measure strain within muscle. Regional fiber orientation and length are related with active/passive strain within muscle. Currently, ultrasound imaging provides the only non-invasive means of observing regional fiber orientation within muscle during dynamic tasks. Previous attempts to automatically estimate fiber orientation from ultrasound are not adequate, often requiring manual region selection, feature engineering, providing low-resolution estimations (one angle per muscle), and deep muscles are often not attempted. Here, we propose deconvolutional neural networks (DCNN) for estimating fiber orientation at the pixel-level. Dynamic ultrasound images sequences of the calf muscles were acquired (25 Hz) from 8 healthy volunteers (4 male, ages: 25–36, median 30). A combination of expert annotation and interpolation/extrapolation provided labels of regional fiber orientation for each image. We then trained DCNNs both with and without dropout using leave one out cross-validation. Our results demonstrated robust estimation of regional fiber orientation with approximately 3° error, which was an improvement on previous methods. The methods presented here provide new potential to study muscle in disease and health.

This research aims to explore the complex interplay between supply chain resilience (SCR), digital supply chain (DSC), and sustainability, focusing on the moderating influence of supply chain dynamism. The goal is to understand how these elements interact within the framework of contemporary supply chain management and how they collectively contribute to enhancing sustainability outcomes. The sample size is 300 CEOs and managers. The study approach integrates quantitative research methods. Structural equation modeling (SEM) is utilized to quantitatively analyze the direct and indirect effects of SCR and DSC on sustainability. The numerous surveys we conduct among supply chain ecosystem stakeholders provide a rich picture of practical implications and contextual nuances. In sum, our early findings generally support a positive relationship between SCR and sustainability in and of itself decrying the need for more resilient supply networks for sustainability. We further find the beneficial impact of digital technologies in promoting sustainability via enhancing environmental control and controlling for efficiency in supply chains. We also offer evidence to show that supply chain dynamism compounds the positive logic between SCR and DSC and sustainability. As a final word, it must be noted that our work speaks to the burgeoning Supply Chain Dynamism as moderator literature by examining the direct and contingent effects of SCR and DSC on not only performance but sustainability. By shedding light on the moderating role of dynamism, the study provides fresh insights into the multifaceted nature of supply chain management and sustainability practices. The study's findings enhance theoretical understanding by elucidating the synergistic effects of SCR, DSC, and sustainability in dynamic supply chain settings. It augments existing theoretical frameworks by integrating concepts of resilience, digitalization, and sustainability into a comprehensive model. Practical and economical, the research offers actionable guidance for organizations aiming to improve sustainability performance through resilient and digitally advanced supply chains. By acknowledging the role of supply chain dynamism, managers can tailor strategies to manage disruptions effectively and leverage digital innovations. Economically, adopting sustainable practices can result in cost savings and competitive advantages. The research emphasizes the importance of aligning supply chain strategies with sustainability goals to drive long-term value and societal impact.

Dangyang Valley is the cradle of Chinese ceramic culture. The production technology of Dangyangyu twisted porcelain has been included in China's national intangible cultural heritage list and is representative of the ceramic production technologies in China. The production of twisted porcelain originated in the Tang Dynasty of China, and after a war in the late Tang Dynasty, its production technology was lost. The production technique of exquisite twisted porcelain contains the technology of twisted molding that is unique in the world. People are amazed by the unique ceramic art it presents. However, its production craft has not been well inherited and developed. In this paper, through the theoretical dimension of extension semantics, the artistic characteristics of Dangyangyu twisted porcelain were taken as the core to extract its cultural expression and quantify the relationship between modeling semantics and culture.Also, with potential cultural connotations tapped, extension semantics were obtained through in-depth analysis and evaluation. The manufacturing technique of twisted porcelain can promote the integration of design extension semantics with its production process, thus continuously updating and developing the production process with the times. This study has provided method support for the development and inheritance of twisted porcelain culture, thus presenting the important promotion significance.

Digitalization have force emerging markets (EMs) firms operating in resource-constrained environment to adopt market-driven strategies, particularly frugal innovation, to provide affordable, optimize processes and high-value solutions. However, understanding the mechanisms behind developing frugal innovation capability (FIC) at the firm level in diverse EMs remains limited. From the perspective of the Resource-based View, this study added to the existing body of knowledge by exploring how strategic orientation (entrepreneurial orientation (EO) and market orientation (MO)) and organizational ambidexterity (OA) impact the development of FIC in EMs. The study utilized a cross-sectional survey in data collection with 386 valid respondents from Tanzanian manufacturing firms to empirically validate our theoretical predictions. The results show that both EO and MO have strong and positive association with OA and the development of FIC in EMs. In addition, OA partially mediate the relationship of both EO and MO with the development of FIC. Furthermore, our results indicate that MO exerts a more significant impact on the development of FIC than EO in EMs. Managers of manufacturing firms in EMs can use these findings to review their strategic decisions and their exploitative and exploratory approaches to enhance supply chains, develop cost-effective technologies, and produce affordable offerings that cater to the preferences of price-conscious consumers in the digitalization age.

Magnetic nanoparticles (MNPs) have attracted a great interest in nanomedical research. MNPs exhibit many important properties, particularly, magnetic hyperthermia for selective killing of cancer cells is one of them. In hyperthermia treatment, MNPs act as nano-heaters when they are under the influence of an alternating magnetic field (AMF). In this work, micromagnetic simulations have been used to investigate the magnetization dynamics of a single-domain nanoparticle of magnetite in an external AMF. Special attention is paid to the circumstances dealing with a dynamic phase transition (DPT). Besides, we focus on the influence of the orientation of the magnetic easy-axis of the MNP on the dynamic magnetic properties. For amplitudes of the external AMF above certain critical value, the system is not able to follow the magnetic field and it is found in a dynamically ordered phase; whereas for larger amplitudes, the state corresponds to a dynamically disordered phase and the magnetization follows the external AMF. Our results suggest that the way how the order-disorder DPT takes place, and both the metastable lifetime as well as the specific loss power (SLP), are strongly dependent on the interplay between the orientation of the magnetic easy-axis and the amplitude of the external AMF.

This study aims to determine the Implication of innovation, proactivity, risk-taking, artistic orientation, and financial literacy on creative economy businesses during the COVID-19 pandemic. This was conducted on 120 creative economy businessmen in Bandar Lampung City, which is a miniature of Indonesia with multiethnic cultures. The results showed innovation is not significant, but proactive attitude, artistic orientation, and financial literacy have a significant implication on the performance of creative economic businesses during the Covid-19 pandemic.

A proper transmission of the orientation between surface and underground workings, by means of vertical shafts, is an important challenge in the mining industry, especially when the mine exceeds 200 meters deep. In fact, this study is developed in a mine located to 700 meters deep. Likewise, this paper assesses the accuracy of this operation, in a case study, using the two shafts plumbing and gyroscope methods in order to compare and analyse the planimetric displacement of the base line due to different source of errors in each one. Upsides and downsides of both methods are analysed in the paper. Some disadvantages in each method have been reduced thanks to the technological progress, especially in the two shaft plumbing method. The different sources of error that affect the measures are thoroughly analysed in the study with the aim to compensate them and achieve the required precision for an underground infrastructure. Mine ventilation has been found as one of the most important sources of error in the plumbing method due to intake and return airflow. In this direction, the paper unfolds some measures to reduce the ventilation influence and details a compensation method to reduce ventilation errors.

Green and low-carbon development has become an important embodiment of China's path to becoming a strong agricultural country. How to enable agricultural enterprises to better adopt green technologies and conduct production and operation with the concept of sustainable development has become a key link. This article utilizes a structural equation model (SEM) to analyze the role paths and mediating effects of organizational learning ability and policy orientation in agricultural enterprises' market orientation and willingness to adopt green technologies[ The definition of green technology in this paper refers to Guo Kesha, Tian Xiaoxiao. Green technology and green transformation of industrial development mode [J]. Tianjin Social Sciences, 2024 (02) :99-107, including green manufacturing (production) technology and green service technology.]. The results show that market orientation, organizational learning ability, and policy effectiveness have significant direct positive impacts on the willingness to adopt; market orientation has a significant positive impact on agricultural enterprises' organizational learning ability, organizational learning ability has a significant positive impact on policy orientation, and market orientation has a significant positive impact on policy effectiveness; the results of mediation analysis also indicate that learning ability has a significant mediating effect between market orientation and willingness to adopt, and policy effectiveness has a significant mediating effect between market orientation and willingness to adopt. Through difference analysis, it is believed that the mediating effects of the three paths are equally important, and organizational learning ability and policy effectiveness play a partial mediating role in agricultural enterprises' willingness to adopt green technologies. Based on this, policy suggestions are proposed to improve enterprises' own organizational learning ability, increase the promotion of policies related to green technologies, improve relevant policies for the application of green technologies, and increase research and development efforts for green technologies.

Abstract: For decades, researchers have suggested the existence of a bilingual cognitive advantage, especially in tasks involving executive functions such as inhibition, shifting, and updating. Recently, an increasing number of studies have questioned whether bilingualism results in change in executive functions, highlighting conflicting data published in the literature. The present study compared the performance of third-, fourth-, and fifth-grade bilingual and monolingual children on attentional and cognitive tasks. Participants were 61 monolingual and 74 bilingual children (M = 114.6 months; SD = 8.48 months) who were tested on two versions of the Attention Network Task (ANT), with and without social stimuli, as well as tests investigating working memory, short-term memory, narrative memory, and receptive vocabulary. Data on families’ socioeconomic status and children’s reasoning abilities were also collected. The results showed that bilingualism and socioeconomic status affected attentional networks in tasks involving social stimuli. In tasks involving non-social stimuli, socioeconomic status only affected the alerting and executive conflict networks. Consistent with the literature, a positive relationship emerged between socioeconomic status and executive control in the context of social stimuli, and a negative relationship emerged between socioeconomic status and the alerting network in the context of non-social stimuli. Interestingly, neither socioeconomic status nor social attentional networks correlated with working memory. Therefore, although more investigations are required, the results suggest that differences in social contexts mainly affect attentional functions.

Artificial Intelligence innovations, such as chatbots and specialized education suggestion tools, provide potential interactive and on-demand pedagogical engagement between non-Christians and Christians with Christianity. However, there is little empirical research on the readiness, acceptance, and adoption of A.I.'s involvement in religious education in a secular state, such as Vietnam. This research addresses the literature gap by providing an entrepreneurial analysis and customer perspectives on the ideas of A.I.'s involvement in religious education. Specifically, the study explores whether the Vietnamese across different ages and religious orientations accept and have enough skills to adopt A.I.'s religious education innovation. The interview sample is 32 participants, selected based on their religious orientation (Christians & Non-Christians) and age (Generation X, Generation Y & Generation Z). Most respondents are open to A.I. application in religious education except for the Church's personnel. However, only gen Z generations are fully prepared to adopt this innovation. Theoretically, the research customizes the Unified Theory of Acceptance and Use of Technology model into religious innovation context. Practically, this research acts as market research on the demand for A.I.'s religious innovation in Vietnam, an insight for future religious tech entrepreneurs.

This study aims to test empirical research on the effect of financial resource ability, research and development (R & D) on innovation orientation and competitive position. This study also examines the critical mediating role of innovation orientation and competitive position to achieving new products performance (NPP). This study used a quantitative research approach by comparing data from service industry and manufacture industry in Indonesia included in Indonesian-State-Ownership companies. The analysis unit in this study used middle managers and top managers who responsible for managing divisions within the Indonesian-State-Ownership companies. The number of respondents studied in this study was 287 sample. The purposive sampling technique was used in taking the research sample. This study indicated that financial resources abilities, research and development (R & D) abilities positive effect on innovation orientation and competitive position. This study also testing the importance role of innovation orientation and a competitive position to enhancing new products performance (NPP).

Objectives: To examine the relationship among edentulism, nutritional intake, and the progress of multimorbidity among older Americans. Methods: We used data from the Health and Retirement Study (2006-2018), a longitudinal survey of older Americans that has collected data biennially since 1992. Edentulism was assessed in 2006 while nutritional intake was assessed in 2013. Multimorbidity was indicated by 5 self-reported chronic conditions: diabetes, heart conditions, lung diseases, cancer, and stroke. Individuals with two or more conditions at baseline were excluded from the analysis. Nutritional intake was calculated by summing 10 nutrients (Protein, Vitamins C, D, B12, E, Calcium, Zinc, Polyunsaturated fatty acids, Folate, and ß- carotene). Structural Equation Modelling (SEM) was used to examine the nutritional pathway between edentulism (2006) and the increase in multimorbidity from 2006- 2018. Results: Individuals included in the analysis were 3,463. The incidence of multimorbidity between 2006 and 2018 was 24.07%. while the percentage of edentate participants in 2006 was 16.42%. The mean of total nutrition in 2013 was 4.50 (4.43, 4.55). SEM analysis showed that edentulism was negatively associated with nutritional intake {estimate -0.15(95% CI: -0.30, - 0.01)}. A negative association was found between total nutrition and multimorbidity {estimate -0.008 (95%CI: -0.01, -0.002)}. Age, wealth and smoking were included in the analysis, and had statistically significant associations with multimorbidity. Conclusion: The analysis demonstrated a longitudinal association between edentulism, nutritional intake, and the progress of multimorbidity.

This study examines the relationship between semantic memory and social cognition in schizophrenia, addressing how these cognitive domains intersect. Semantic memory, which includes general world knowledge and word meanings, was evaluated using verbal fluency tasks and the Camels and Cactus Test. Social cognition, essential for social interaction, was assessed through emotion recognition (Faces Test) and Theory of Mind (Hinting Task). Participants included 50 individuals with schizophrenia and 30 controls. The schizophrenia group showed significantly lower performance on both semantic memory and social cognition tasks. Notably, strong correlations were found between the Camels and Cactus Test and social cognition measures, suggesting that social cognition deficits in schizophrenia may be linked to semantic memory impairments. Regression analyses highlighted that the Camels and Cactus Test significantly predicted social cognition performance, independent of symptomatology. These findings underscore the interconnectedness of semantic memory and social cognition in schizophrenia, suggesting that semantic memory deficits, particularly in non-categorical associations, play a important role in social cognitive impairments. This study provides new insights into the cognitive underpinnings of schizophrenia, emphasizing the need for further research to explore these relationships and their implications for cognitive models and therapeutic interventions.

The case of a patient with autoimmune haemolytic anaemia and an anastomosing haemangioma, is presented. The main dilemma was whether the haemangioma was the cause or the consequence of the autoimmune haemolytic anaemia and how both processes should be management. The diagnostic methods used are analytical and imaging techniques, which have not been conclusive in the diagnosis of anastomosing haemangiomas. Preoperative corticosteroid treatment does not prevent the recurrence of autoimmune haemolytic anaemia in the postoperative period. Surgical indication is established by the progression of proliferative activity, tumor enlargement and compression of the vena cava over time. Surgical resection of the tumor is the procedure used. The indication for surgical treatment of the anastomosing haemangioma and the decrease in alpha- fetoprotein after tumor resection are the most relevant results, although it increases again after a few weeks. The development of an anastomotic haemangioma may be secondary to autoimmune haemolytic anaemia. Angiogenesis resulting from the formation of erythroblastic islands at the periphery of the tumor and clonal expansions may be a mechanism to compensate for the haemolysis caused by autoimmune haemolytic anaemia

We revisit the notion of climate, along with its historical evolution, tracing the origin of the modern concerns about climate. The notion (and the scientific term) of climate has been established during the Greek antiquity in a geographical context and it acquired its statistical content (average weather) in modern times, after meteorological measurements had become common. Yet the modern definitions of climate are seriously affected by the wrong perception of the previous two centuries that climate should regularly be constant, unless an external agent acted. Therefore, we attempt to give a more rigorous definition of climate, consistent with the modern body of stochastics. We illustrate the definition by real-world data, which also exemplify the large climatic variability. Given this variability, the term “climate change” turns out to be scientifically unjustified. Specifically, it is a pleonasm as climate, like weather, has been ever changing. Indeed, a historical investigation reveals that the aim in using that term is not scientific but political. Within the political aims, water issues have been greatly promoted by projecting future catastrophes while reversing the true roles and causality directions. For this reason, we provide arguments that water is the main element that drives climate and not the opposite.

Angiotensin-converting enzyme 2 (ACE2) is an important player of the renin-angiotensin-aldosterone system (RAAS) in regulating the conversion of angiotensin II into angiotensin (1-7). While expressed on the surface of human cells, such as lung, heart, kidney, neurons, and endothelial cells (EC), ACE2 is the entry receptor for SARS-CoV-2. Here, we would like to highlight that ACE2 is predominant on the EC membrane. Many of coronavirus disease 2019 (COVID-19) symptoms have been associated with the large recruitment of immune cells, directly affecting EC. Additionally, cytokines, hypoxia, and complement activation can trigger the activation of EC leading to the coagulation cascade. The EC dysfunction plus the inflammation due to SARS-CoV-2 infection may lead to abnormal coagulation, actively participating in thrombo-inflammatory processes resulting in vasculopathy and indicating poor prognosis in patients with COVID-19. Considering the intrinsic relationship between EC and the pathophysiology of SARS-CoV-2, EC-associated therapies such as anticoagulants, fibrinolytic drugs, immunomodulators, and molecular therapies have been proposed. In this review, we will discuss the role of EC in the lung inflammation and edema, in the disseminate coagulation process, ACE2 positive cancer patients, and current and future EC-associated therapies to treat COVID-19.

Involving local people in natural area management is very important to address the complexity of environmental management issues for sustainable use of local resources. Participatory methods require the contribution of local stakeholders in decision making. Mapping the environmental views of local communities allows for detecting aspects that could facilitate management efforts. This research – in the frame of the Skyros LIFE project and the PAMNATURA project - measures local acceptability of the conservation actions proposed by the LIFE project in Skyros Island (Greece) in relation with recording local people’s environmental orientation using the 15-item revised New Ecological Paradigm (NEP) scale. The research was carried out by means of questionnaires. The LIFE project proposed actions were grouped into three categories according to their theme, i.e. promoting (a) Nature protection, (b) Agro-pastoralism and (c) Ecotourism. The sample seems to largely agree with the LIFE project proposals, while the results showed high scores for most of the NEP scale items, implying pro-environmental beliefs, though there appears disagreement or neutrality regarding a few items. Local acceptability of the proposed actions was found to correlate to local people’s environmental concern measured through the NEP scale. Drawing on the results, implementation of actions related directly or indirectly to economic activities, preservation of traditional activities, as well as environmental education, interactive informing and consultation could enhance local participation. Skyros island seems to offer an appropriate social background for applying participatory and adaptive management and implementing conservation programs.

The adsorption of proteins on polymer is widely used in biosensors. Here, molecular dynamics (MD) simulation was used to study the immobilization of angiotensin converting enzyme II (ACE2) with six initial orientations proposed on polystyrene (PS) at the ambient conditions of pH (4.5, 6, 7, 8, 9.5) and NaCl (0.01, 0.05, 0.1, 0.15, 0.2, 0.25 M). ACE2 immobilization under favorable ambient conditions was characterized by minimum distance (short), settlement time (fast), interaction energy (substantial) and protein configuration (stable). ACE2 orientations proposed in 0.15M NaCl were respectively preferable to (90, 0, 0), (0, 0, 0) and (0, 270, 0), (180, 0, 0) and (0, 90, 0), (90, 0, 0) at pH 4.5, 6, 7, 9.5. ACE2 immobilization was further evaluated at pH 7 by optimizing NaCl concentration. Its proposed orientations of (i) (0, 270, 0), (ii) (0, 0, 0) and (90, 0, 0), and (iii) (0, 90, 0) and (90, 0, 0) were preferable in 0.05, 0.1 and 0.2 M NaCl, respectively. The great significance of cubic-orientation settlement mode provides tangible improvement for the microfabrication of biochips for rapid diagnosis of severe acute respiratory syndrome coronavirus II (SARS-CoV-2).

Based on the institutional theory and resource-based theory and the "institution-strategy-performance" research paradigm, this research explores the mechanism of institutional support on the innovation performance of new ventures, focusing on the mediating role of entrepreneurs and the moderating role of innovative resource acquisition. An empirical analysis based on 278 survey samples shows that: ① (formal/informal) institutional support positively affects the innovation performance of new ventures; ② entrepreneurial orientation plays an intermediary role between institutional support and innovation performance of new ventures; ③ innovation resource acquisition not only positively regulates the relationship between entrepreneurial orientation and innovation performance of new ventures, but also enhances the mediation of entrepreneurial orientation between institutional support and innovation performance. The conclusion shows that institutional support plays an important role in the innovation practice of new ventures, and can provide guidance for the innovation management practices of new ventures.

In recent decades, widespread damage to structures due to destructive earthquakes has encouraged researchers to use seismic control systems. One of the most important structures is bridges, which should maintain their service after severe earthquakes. One of the ways to control the bridge is to isolation the deck from the substructure, which results in high displacements at different points in the bridge and the residual displacements within the separator itself, thus requiring repair and replacement of these systems after severe earthquakes. Therefore, the use of new seismic separation systems on bridges has always been important. The purpose of this project is to utilize a new memory-shaped seismic separator system to investigate the seismic performance of v-shaped column bridges , in which case the effect of earthquake orientation and its effects on responses the earthquake will also be assessed. Due to the ever-increasing advances in various intelligent materials, such as shape memory alloys, and their unique capacities, such as back-centering, and high fatigue and corrosion resistance, in this study, these materials have been used as a complementary component along with lead core separators. The shape memory alloy has been used as 4 vertical rods that connect two separating parts to each other and in this research the diameter and location of these rods will be calculated using optimization algorithm in Matlab software.

The amino acid composition of the active site in an enzyme is influential on its substrate selectivity. For CYP2E1, the role of PHE residues in the formation of effective orientations for its activity toward aromatic substrates remains unclear. In this study, molecular docking and molecular dynamics analysis were performed toward the interactions between PHEs in the active site of human CYP2E1 and various aromatic compounds as confirmed CYP2E1 substrates. The results indicated that the orientation of 1-methylpyrene (1-MP) in the active site was highly modulated by the PHEs, PHE478 contributing to the binding free energy most significantly. Furthermore, by building a random forest model the relationship between each of 19 molecular descriptors of PCB congeners (from molecular docking, quantum mechanics, and physicochemical properties) and established human CYP2E1-dependent mutagenicity of a series of polychlorinated biphenyls (PCBs), which have been proven to be human carcinogens and endocrinal disrupters, was investigated. The presence of PHEs did not appear to significantly modify the electronic or structural feature of each bound ligand (PCB), instead, the flexibility of the molecular conformation of PHEs contributed substantially to the effective binding energy and orientation. It is supposed that PHE residues adjust their own conformation to permit a suitable space for the ligand binding and form an orientation favorable for a biochemical reaction. This study has provided some insights into the role of PHEs in guiding the interactive adaptation of the active site of human CYP2E1 for the binding and metabolism of aromatic substrates.

This report describes the collection of a large dataset (6930 measurement) on dimensional error in the fused deposition modeling (FDM) additive manufacturing process for full-density parts. Three different print orientations were studied, as well as seven raster angles (0°, 15°, 30°, 45°, 60°, 75°, and 90°) for the rectilinear infill pattern. All measurements were replicated ten times on ten different samples to ensure a comprehensive dataset. Eleven polymer materials were considered: acrylonitrile butadiene styrene (ABS), polylactic acid (PLA), high-temperature PLA, wood-composite PLA, carbon-fiber-composite PLA, copper-composite PLA, aluminum-composite PLA, high-impact polystyrene (HIPS), polyethylene terephthalate glycol-enhanced (PETG), polycarbonate, and synthetic polyamide (nylon). The samples were ASTM-standard impact testing samples, since this geometry allows the measurement of error on three different scales; the nominal dimensions were 3.25mm thick, 63.5mm long, and 12.7mm wide. This dataset is intended to give engineers and product designers a benchmark for judging the accuracy and repeatability of the FDM process for use in manufacturing of end-user products.

This study investigates the impact of experienced contact on prejudiced attitudes toward individuals with intellectual disabilities (ID), examining beliefs in a just world (BJW) and social dominance orientation (SDO) as potential serial mediators. Data were collected from 224 university students (M = 23.02, SD = 2.48). Path analysis modeling assessed the structural relationships between the study variables. The findings revealed that experienced contact was negatively and significantly associated with BJW and SDO. Additionally, BJW and SDO fully mediated the relationship between experienced contact and overt prejudice. These findings underscore the influence of individual differences on attitudes toward individuals with ID, establishing a crucial foundation for future research and the development of interventions aimed at reducing prejudice and discrimination.

There has been no significant efficacy in treatment for osteosarcoma (OS) metastasis after nearly four decades of trials. This motivates us to elucidate OS therapies according to their four bidirectional mutation stages. To refresh the OS therapy status quo, the historical developments and clinical advancements are briefly described. However, the main issue of metastasis remains unresolved, accounting for 90% of pulmonary metastasis deaths. Thus, this metastasis problem is related to immune evasion and chemoresistance that are being induced after long-term treatment by the use of immunotherapy for tumorigenesis. Therefore, it is rationale to discuss the relationship cycles of mutation stages including tumorigenesis, metastasis, immune evasion, and chemoresistance. Even though many combinational and targeted therapies have been developed to intensify these mutation treatments, successful clinical translations with higher cure rates are still rare. Through this review, an in-depth understanding of the bidirectional relationship between the four OS mutation stages and their respective therapies is provided. Herein, we summarise the medicines used to treat tumorigenesis, including COLGALT2 inhibitors, Tra2B, and AGAP1, miR-148a and miR-21-5p EVs, and the lncRNA LIFR-AS1. Following the medicines used to treat metastasis are AXL, miR-135a-5p, mRNA BCL6, TGFβ1, Tim-3, SOCS5, CASC15, KLF3-AS1, PDCD4, ATG5, and Rab22a-NeoF1. Then the medicines used to treat immune evasion are N-cadherin, anti-IL-9, USP12 inhibitor, IgG-4+ B-cells, LAP inhibitor, anti-Wnt2 mAb, anti-αvβ8 integrin, HK2-mediated IκBα, IDO inhibitor with NO, and TGF-βRII with anti-IgG1. Finally, the medicines used to treat chemoresistance are DHFR, FPGS, HSP-90AA1, XCT-790, ATKI, and IGF1. As a result, this contribution is expected to serve as a reference and guide for scientists and clinicians.

Body mass index has been studied as one of the factors that negatively influences COVID-19. In this work we intend to analyze this influence. A representative sample of the population of Beira Interior was used (around 2%), to which immunity research and a socio-demographic survey were carried out. It was found that obesity influences the vaccination rate, and all other variables analyzed were not influenced by the body mass index.

In 2023, the technological landscape witnessed an unprecedented surge of transformative innovations, including Web 3.0 and machine learning, poised to revolutionize various aspects of our daily lives. At the forefront of this revolution stands artificial intelligence (AI), which has evolved from a concept once confined to science fiction into an indispensable force reshaping industries on a global scale. Notably, recent years have seen remarkable strides in AI functionalities, particularly in machine learning, computer vision, and natural language processing. These advancements have empowered AI to generate diverse interactions and media autonomously. This study ultimately provides invaluable insights into the dynamic intersection of AI and Advertising, con-tributing to a deeper comprehension of this evolving field. This study conducts a comprehensive review of Artificial Intelligence within the advertising domain, employing network analysis. By meticulously examining the evolution of AI through co-occurrences of terms, keywords, and co-authorship analysis, we aim to unveil the relationship of AI & Advertising through the lens of Generative models to identify pivotal trends, core concepts, and seminal studies that have profoundly influenced the industry. The analysis charts the trajectory leading to the emergence of Generative Artificial Intelligence (GenAI), a transformative development poised to revolutionize advertising practices and consumer engagement. In tandem with these objectives, the results highlight vital trends, emphasizing the growing prominence machine learning tools and techniques such as deep learning techniques and advanced natural language processing methods like word2vec, GANs, and more in shaping the future of advertising practices.

Emotional intelligence and educational level are commonly associated with success in life and well-being. While multiple studies have explored these concepts independently, few studies have examined the impact of educational level on emotional intelligence and associated variables, such as well-being. A total of N = 202 participants were recruited online. Participants completed measures of emotional intelligence, well-being (i.e., happiness, self-esteem, personal growth). Overall, participants who previously obtained a bachelor’s degree displayed higher levels of emotional intelligence, happiness, self-esteem, and personal growth compared to those without an undergraduate degree. However, no differences were observed on any variable between individuals currently enrolled in a university and non-students. The results suggest that, while completing a university degree increases emotional intelligence and well-being, the stress of being a student may negatively impact the benefits obtained from attending university. Limitations and possible directions for future research are discussed.

Optical properties of the cornea are responsible for correct vision, ultrastructure allows optical transparency and biomechanical properties governs the shape, elasticity or stiffness of the cor-nea affecting ocular integrity and intraocular pressure. Therefore, optical aberrations, corneal transparency, structure and biomechanics play a fundamental role in the optical quality of hu-man vision, ocular health and refractive surgery outcomes. However, the convergence of those properties is not yet reported at macroscopic scale within the hierarchical structure of the cornea. This work explores the relationships between biomechanics, structure and optical properties (corneal aberrations and optical density) at macrostructural level of the cornea through dual Placido-Scheimpflug imaging and air-puff tonometry systems in a healthy young adult popula-tion. Results showed convergence between optical transparency, corneal macrostructure and biomechanics.

This scoping study aims to explore the relationships between urban green spaces (UGSs) and cancer. We followed the PRISMA extension for scoping reviews (protocol published in 2018). Eligibility criteria for papers were: 1) to be concerned with UGSs, 2) reporting effects of UGSs on cancer-related outcomes including direct or indirect measures, 3) reporting randomized controlled trials, prospective cohort studies, case studies, observational studies, non-comparative studies, 4) in English or French. The search covered primary studies in the published and unpublished (grey) literatures searching by hand and electronic databases (MEDLINE, Green File, CINAHL and ScienceDirect). Among 1703 records screened by two reviewers independently, 29 were included for qualitative synthesis. We classify the cancers concerned and the effects reported i.e. protective effect, risk or without association. The most investigated cancers are bladder, breast and lung cancer. Our study also identified contributing factors and their mediating effects between UGSs and cancer. Results highlight the wide variety of possible mediating factors between the use of green spaces and cancer occurrence, remission and/or prevention. Knowledge gaps and future research perspectives should be oriented to qualitative research on protective factors, the role of mental health in recovering from cancer and health inequalities.

In this short note, the described step-by-step derivations of the industrial energy demand function from the production function framework and provided researchers with two specifications. Then we applied these theoretical specifications to the time series data as empirical analysis. We concluded that theories should be considered at the beginning of the empirical analyses but the data also should be allowed to speak freely. Hence, the main suggestion of this short note is that it would be a better strategy to consider the combination of theory-driven and data-driven approaches in the empirical analyses.

Vitamin C is important in preventing and slowing the progression of many diseases. There is significant evidence linking periodontal disease and vitamin C. We aimed to systematically review studies addressing the relationship between vitamin C and periodontal disease and the preventive ability of vitamin C against periodontal disease. Electric searches were performed using PubMed, EMBASE, Cochrane Library, and Web of Science. Studies addressing the relationships between periodontal disease and vitamin C in adults aged over 18 years were included. Quality assessment was done using Critical Appraisal Skills Program guideline and GRADE-CERQual. Seventy hundred and sixteen articles were retrieved and fifteen articles (7 cross-sectional studies, 2 case-control studies, 2 cohort studies, and 4 randomized controlled trial [RCT]) were selected by reviewing all articles. Vitamin C intake and blood level were negatively related to periodontal disease in all 7 cross-sectional studies. Subjects who suffer from periodontitis presented lower vitamin C intake and lower blood vitamin C level than subjects without periodontal disease in the two case-control studies. Patients with lower dietary intake or lower blood level of vitamin C showed greater progression of periodontal disease than did the controls. Intervention using vitamin C administration improved gingival bleeding in gingivitis but not in periodontitis. Alveolar bone absorption was also not improved. The present systematic review suggested that vitamin C contributes to reduced risk of periodontal disease.

Open pit mining is a common activity in the Yucatan peninsula for the extraction of limestone. This mining is known under the generic name of quarries, and regionally as sascaberas (sascab=white soil in Mayan language). These areas are characterized by the total removal of the natural vegetation cover and soil in order to have access to the calcareous material. The present study shows the composition and structure of the vegetation in five quarries after approximately ten years of abandonment, and the conserved vegetation near to each one of the quarries in southeastern Quintana Roo. Using a canonical correspondence analysis (CCA), the distribution of the species was determined in relation to the edaphic variables: soil depth, percentage of organic matter (OM), cationic exchange capacity (CEC), pH and texture. 26 families, 46 genera and 50 species were recorded in the quarries and 25 families, 45 genera and 47 species were recorded in the conserved areas. The dominant species in the quarries belong to the families Poaceae, Fabaceae, Rubiaceae and Anacardiaceae. The quarries with higher values of OM (1.63%), CEC (24.05 Cmol/kg), depth (11 cm) and sand percentage (31.33%) include the following species like Lysiloma latisiliquum, Metopium brownei and Bursera simaruba which are commonly found in secondary forests. On the other hand, quarries with lower values of OM (0.39%), CEC (16.58 Cmol/kg) and depth (5.02), and higher percentage of silt (42.44%) were dominated by herbaceous species belonging to the Poaceae family and by Borreria verticillata, which are typical in disturbed areas of southeastern Mexico. In all cases, the pH was slightly alkaline due to the content of calcium carbonate (CaCO3), characteristic of the soils of the region. The edaphic variables are significantly correlated with the development and distribution of vegetation, and with the structure of the communities.

In this study, the relationship between air diffusivity and permeability in cementitious materials was investigated. First, we derived an equation to correlate air diffusivity and permeability in a straight circular tube. Then, we reviewed existing studies that measured both air diffusivity and permeability and compared reported data and calculated values to verify the applicability of the derived equation to cementitious materials. Although a correction factor was not used, the two sets of data showed good agreement quantitatively. This indicates that the derived equation can be applied to cementitious materials including concrete, and measured air diffusivity can be converted to permeability of concrete and vice versa using the derived equation.

The relationship of the animal with its environment has been of longstanding interest in philosophy and science. Here I provide a brief introduction to concepts that place an emphasis on mutualism as the basis of organism - environment interaction, in contrast to the long standing view that the environment exerts an instrumental role in shaping the organism. Two influential theories have been von Uexküll’s theory of umwelt and Gibson’s theory of affordances. The former envisioned the animal as immersed in its surroundings (umwelt) to form a functional unit. In a similar manner, the latter theory describes a unity between 1) environmental information that provides the animal with opportunities for action (affordances) and 2) the ability of the animal to perceive and engage with those affordances. These views have influenced more recent ecological models of the organism as the functional unit of biology and have also influenced models of immune function. In ecological models, agency is seen as the ability of the organism to predict and control its engagement with the environment in order to maintain its integrity. The predominant contemporary model of neural function in which perception and action are understood to operate through Bayes-like active inference complements the concept of agency as proposed by the mutualism models. However, it is suggested that rather than a constant mutualism, encounters between organism and environment range over a dynamic spectrum from dualism to mutualism. It is also suggested that along this spectrum, agency emerges when the balance of instrumentality shifts from the environment to the organism, and that the balance of this relationship can further progress towards a felicitous mutualism. Meaning emerges between environmental information and an agent as opportunity for action. Implications for opportunities to foster agency in animals within our care is noted.

Electromagnetic sensors have been used for inspecting small surface defects of metals. Based on the eddy-current thin-skin regime, a revised algorithm is proposed for a triple-coil drive-pickup eddy-current sensor scanning over long surface crack slots (10 mm) with different rotary angles. The method is validated by the voltage measurement of the designed EC sensor scanning over a benchmark (ferromagnetic) steel with surface defects of different depths and rotary angles. With an additional sensing coil for the designed EC sensor, the defect angle (or orientation) can be measured without spatially and coaxially rotating the excitation coil. By referring to the voltage change (due to the defect) diagram (voltage sum versus voltage different) of two sensing pairs, the rotary angle of the surface crack is retrieved with a maximum residual deviation of 3.5 %.

The Ras family of proteins is tethered to the inner leaflet of the cell membranes which play an essential role in signal transduction pathways that promote cellular proliferation, survival, growth, and differentiation. KRas-4B, the most mutated Ras isoform in different cancers, has been under extensive study for more than two decades. Here we have focused our interest on the influence of cholesterol on the orientations that KRas-4B adopts with respect to the plane of the anionic model membranes. How cholesterol in the bilayer might modulate preferences for specific orientation states is far from clear. Herein, after analyzing data from in total 4000 ns-long MD simulations for four KRas-4B systems, properties such as the area per lipid and thickness of the membrane as well as selected radial distribution functions, penetration of different moieties of KRas-4B, and internal conformational fluctuations of flexible moieties in KRas-4B have been calculated. It has been shown that high cholesterol content in the PM favors OS1, exposing the effector-binding loop for signal transduction in the cell from the atomic level. We confirm that high cholesterol in the PM helps KRas-4B mutant stay in its constitutively active state, which suggests that high cholesterol intake can increase mortality and may promote cancer progression for cancer patients. We propose that during the treatment of KRas-4B-related cancers, reducing the cholesterol level in the PM and sustaining cancer progression by controlling the plasma cholesterol intake might be taken into account in anti-cancer therapies.

This study draws on both the theory of resource-based view and the theory of stakeholders to investigate the effects of Green Human Resource Management (Green HRM) practices on Sustainability and Employee Health Orientation (EHO) through the mediating effect of Environmental Performance (EP). Based on a cross-sectional survey questionnaire, the data were collected from 318 service and manufacturing firms across India. Partial least squares structural equation modeling (PLS-SEM) was applied to determine the link among constructs. The findings of the empirical evidence reveal that Green HRM practices have positive and significant effects on EP, Sustainability and EHO. Also, the findings demonstrate that EP partially mediates the link between Green HRM practices and Sustainability. Similarly, the findings establish that EP partially mediates the link between Green HRM practices and EHO. Finally, the potential implications of this research and future research for practitioners and scholars are addressed.

In tropical areas, simultaneous transmission of several vector-borne diseases is common due to ecological factors that are shared by arthropod vectors. Malaria and dengue virus, transmitted by Anopheles and Aedes mosquitoes, respectively, are among the top vector-borne diseases that cause significant morbidity and mortality in endemic areas. Notably, tropical areas often have suitable conditions for the co-existence of these mosquito species, highlighting the importance of identifying markers that accurately indicate the risk of acquiring each specific disease entity. Aedes are daytime-biting mosquitoes, while Anopheles preferentially bite during the night. These biting patterns raises the possibility of concurrent exposure to bites from both species. This pattern is important since mosquito saliva, deposited in the skin during blood feeding, induces immune responses that modulate pathogen establishment and infection. Previous studies have focused on characterizing such effects on the vector-pathogen interface for an individual pathogen and its mosquito vector. In this study, we evaluated associations between immune responses to salivary proteins from non-dengue and non-malaria vector mosquito species with clinical characteristics of malaria and dengue, respectively. Surprisingly, antibody responses against Anopheles antigens in dengue patients correlated with red blood cell count and hematocrit, while antibody responses against Aedes proteins were associated with platelet count in malaria patients. Our data indicate that concurrent exposure to multiple disease-carrying mosquito vectors and their salivary proteins with differing immunomodulatory properties could influence the transmission, pathogenesis, and clinical presentation of malaria, dengue fever, and other vector-borne illnesses.

It has not been reasonably explained still now, how the “chicken and egg relationship” between gene and protein was formed, although RNA world hypothesis was proposed to aim at explaining formation process of the relationship about 40 years ago. On the other hand, GADV hypothesis advocates that life emerged after five members of the fundamental life system; cell structure, metabolism, tRNA, genetic code and gene, were piled up one by one onto immature [GADV]-proteins, which were produced by random joining of [GADV]-amino acids on the primitive Earth. Furthermore, formation process of the first (GNC)n RNA gene encoding a mature [GADV]-protein can be also reasonably explained according to the hypothesis as follows. Double-stranded (ds)-(GNC)n RNA could be produced by complementary strand synthesis of a single-stranded (ss)-(GNC)n RNA, which was formed by random joining of GNC anticodons carried by four types of AntiC-SL tRNAs. Successively, the first (GNC)n RNA gene was generated upon maturation of an immature [GADV]-protein, which was produced through expression of codon sequence on one strand of ds-(GNC)n RNA, as accumulating necessary base substitutions and raising a weak catalytic activity of the immature protein to a more active state. It is considered that, consequently, a gene encoding a mature protein, which has the “chicken and egg relationship”, was generated for the first time. Therefore, it can be concluded that the “chicken and egg relationship” was built not by formation of either one, gene or protein, but by maturation of an immature gene, which was lead by improvement of catalytic activity of an immature protein. That is, it can be concluded that the reason, why it was unable to give an answer to the question on the formation process of the “chicken-egg relationship” thus far, is because it was an unanswered question.

Aluminium alloys are used for fabrication of fuel clad of research grade nuclear reactors as well as of several types of core components of high flux research reactors. In order to carry out design and safety analysis of these components, their mechanical and fracture properties are required by the designer. In this work, experiments have been conducted on tensile specimens machined from an aluminium alloy block to evaluate the material stress-strain curve. For evaluation of fracture properties, experiments have been conducted on disc shaped compact tension specimens in order to determine the fracture toughness of aluminium alloy. From crystal plasticity based finite element analysis and experimental data, a material damage parameter for prediction of crack initiation has been evaluated. The variation of the parameter for various values of initial a/W ratios of the disc-shaped CT specimens have been studied. It was observed that the damage parameter is independent of crack geometry and hence, it qualifies as transferable material property which can be used to predict crack initiation in a component of this material subjected to different kinds of loading conditions. In addition, the JR curves of the disc-shaped CT specimens have also been evaluated from experiments. The material damage parameter has also been used to study the crack initiation in single crystal fracture specimens with two different orientations. It was observed that the [111] orientation is more susceptible to crack initiation and propagation compared to the [100] orientation as the damage parameter is high in the ligament of the specimen ahead of the crack-tip for the same level of load. The results of the experiments and the material damage parameter shall be helpful for integrity analysis of fuel clad of research reactors as well as components of high flux research reactors.

This review systematically explored structural, functional, and metabolic features of the cisgender brain compared with the transgender brain before hormonal treatment and the heterosexual brain compared to the homosexual brain from the analysis of the neuroimaging literature up to 2018, and identified and discussed subsequent studies published up to March 2021. Our main aim was to help identifying neuroradiological brain features that have been related to human sexuality to contribute to the understanding of the biological elements involved in gender identity and sexual orientation. We analyze 39 studies on gender identity and 24 on sexual orientation. Our results suggest that some neuroanatomical, neurophysiological, and neurometabolic features in transgender individuals resemble those of their experienced gender despite the majority resembling those from their natal sex. In homosexual individuals the majority resemble those of their same sex heterosexual population rather than their opposite sex heterosexual population. However, it is always difficult to interpret findings with non-invasive neuroimaging. Given the gross nature of these measures, it is possible that more differences too subtle to measure with available tools yet contributing to gender identity and sexual orientation could be found. Conflicting results contributed to the difficulty of identifying specific brain features which consistently differ between cisgender and transgender or between heterosexual and homosexual groups. The small number of studies, the small-to-moderate sample size of each study, and the heterogeneity of the investigations made it impossible to meta-analyze all the data extracted. Further studies are necessary to increase the understanding of the neurological substrates of human sexuality.

Perceived peer support is a critical factor in the academic adjustment of higher vocational college students. While previous studies have explored this relationship, few studies have delved into the underlying mechanisms. This study surveyed 9782 students from 35 higher vocational colleges in 13 provinces and cities in China to explore the relationship and mechanisms between perceived peer support and academic adjustment. Drawing on Conservation of Resources theory and Social Support Resource theory, the findings revealed that perceived peer support not only directly predicted the academic adjustment of higher vocational college students, but also indirectly through the independent mediating effect of academic hope and professional identity, as well as the chain-mediating effect of academic hope to professional identity. Additionally, students from vocational high schools showed a more significant increase in academic hope due to perceived peer support compared to those from general high schools, highlighting the moderating effect of educational background. The study provided a new theoretical perspective for understanding the complex mechanisms of academic adjustment in students and offers valuable guidance for educational practice, emphasizing the importance of fostering perceived peer support, academic hope, and professional identity in higher vocational education.

Our study focused on investigating the impact of Instagram use on body satisfaction and self-esteem among participants aged 20 to 40 years (N = 95) through a cross-sectional survey design in which the Rosenberg Self-Esteem Scale, the Body Shape Questionnaire (BSQ), and ad hoc designed questions were administered. The results highlight the influence of Instagram on body dissatisfaction (p = .005) but not on self-esteem (p = .211). Gender was not found to be an influential factor (p = .173). However, it was found that greater body satisfaction correlates with higher self-esteem and vice versa (p < .001). Finally, we concluded that the number of hours users in the sample spend on Instagram is related to greater body dissatisfaction but not to lower self-esteem.

Tennis is an individual sport characterised by high intensity action, including sprints and changes of direction (COD). There is a gap in the knowledge of limb asymmetries in adolescent tennis players and their association with performance. This study aimed to examine the relationship between asymmetry in vertical and horizontal jump tests (CMJ and HJ) and COD with lower limb performance variables in adolescent tennis players. Forty-five adolescent tennis players (age: 13.81 ± 1.08 years; height: 167.64 ± 9.9 cm; body mass: 57.48 ± 10.94 kg; body mass index: 20.27 ± 2.18 kg/m2) performed the CMJ test (unilateral and bilateral), horizontal jumps (unilateral and bilateral), 25 m sprint and 180º COD test. The single-leg countermovement jump showed the greatest asymmetries among the different tests (6.62 ± 9.35%). Significant negative relationships were found between CMJ asymmetry and COD asymmetry with unilateral horizontal jump variables (r = -0.30 to -0.53). In addition, CMJ asymmetry showed significant relationships with CMJR (r=0.49) and COD180R (r=0.29), whereas COD asymmetry showed a significant relationship with COD180L (r=0.40). On the other hand, HJ asymmetry showed no significant relationships with any variable. The main findings of this study indicate that greater imbalances in the CMJ and COD tests are associated with a reduced capacity to perform unilateral horizontal jumps. These results suggest the need to incorporate training protocols that reduce interlimb asymmetries in growing athletes to improve their performance.

Every land plant exists in close relationship with microbial communities of several niches: rhizosphere, endosphere, phyllosphere, etc. The growth and yield of potato – a critical food crop worldwide – highly depend on the diversity and structure of bacterial and fungal communities with which the potato plant coexists. The potato plant has a specific part – tubers, and the soil near the tubers as sub-compartment is usually called “geocaulosphere”, which is associated with storage process and tare soil microbiome. Specific microbes can help the plant to adapt to particular environment conditions and resist to pathogens. There is a number of approaches to modulate the microbiome that provides organisms with desired traits during inoculation. The mechanisms of plant–bacterial communication remain understudied, and for the further engineering of microbiomes with particular features the knowledge on potato microbiome should be summarized. The most recent approaches to microbiome engineering include construction of a synthetic microbial community or management of plant microbiome using genome engineering. In this review, the various factors that form the microbiome of potato and the role of these factors in overcoming the negative impact of drought and pathogens are surveyed.

The study aimed to determine, through a systematic review, the relationship between Reactive Attachment Disorder (RAD) and the presence of psychopathology in children and adolescents and to determine the existence of differences about the presence of internalising and externalising psychological problems between the RAD group and groups with other disorders or with typical development. Following the PRISMA methodology, a search was carried out in the Web of Science, PubMed and Scopus databases. The search yielded 770 results, of which only 25 met the inclusion criteria. The results, indicate a relationship between the presence of RAD and/or Disinhibited social engagement disorder (DSED) with the presence of internalising and externalising problems. These difficulties are more present in children with RAD compared to children without personal difficulties, or children with DSED, children with autism, children with intellectual disabilities or children with hyperactivity. It can be concluded that the presence of RAD has negative consequences on the mental health of children and adolescents, with these being greater in the inhibited group than in the disinhibited group, and with respect to children with autism or hyperactivity.

Background: The COMT gene polymorphism is associated with neurological and psychiatric disorders and pain perception. This study aimed to determine the relationship between the COMT (catechol-O-methyltransferase) gene polymorphism, pain perception in parturients with inhaled nitrous oxide during labour, and anxiety as a personality trait. Methods: A total number of 181 woman who chose vaginal birth were enrolled in this study. To present the difference in pain perception, the parturients were divided into one group (n=80) that chose labour analgesia with inhaled nitrous oxide (50% nitrous oxide and 50% oxygen) and one group without analgesia. The blood samples were taken during the pregnancy as a part of routine pregnancy controls in the hospital. The COMT gene polymorphism was detected with the PCR technique. Pain perception of labouring women was self-evaluated two times according to the VAS (Visual Analogue Scale) and anxiety as a personality trait was determined with STAI-T (State Trait Anxiety Inventory). Pain perception as well as anxiety were compared according to COMT genotypes. Results: In the 181 pregnant women there were 40 women (22%) of wild homozygotes (GG) of COMT, 95 women (53%) of mutant heterozygotes (GA), and 46 women (25%) of mutant homozygote (AA). A negative association of pain perception with the GA (mutant heterozigote) polymorphism of the COMT gene versus the wild type (GG polymorphism) was observed. The GA polymorphism of the COMT gene was associated with 0.46 units lower pain perception compared to the wild type (GG). The anxiety trait score in group AA was lower than in groups GA and AA. The difference reached statistical significance only when comparing AA versus GA (P&gt;0.042). Analgesic efficacy of nitrous oxide was noticed in 22% of labouring women who reported moderate pain (VAS score 4-7). Conclusions: The COMT gene polymorphism was associated with pain perception and anxiety among labouring women. The COMT gene polymorphism GA was associated with negative pain perception among labouring women. Nitrous oxide showed statistical significance in anxiolytic efficacy during labour in women with mild anxiety as a personality trait. Anxiolytic efficacy of nitrous oxide has shown better efficacy in labouring women with the COMT gene polymorphism AA.

Self-efficacy and perfectionism play an important role in high-performance activities. This cross-sectional study analyses the relationship between these constructs and resilience in a sample of 145 music students (57.9% female) with a mean age of 27.77 years. Perfectionism was assessed using the Multidimensional Inventory of Perfectionism in Sport, resilience using the Resilience Scale, and self-efficacy using the General Self-Efficacy Scale. Compared to those with low resilience, students with high resilience score higher on self-efficacy and lower on dysfunctional perfectionism. No differences were observed in the total perfectionism score or adaptive perfectionism. Self-efficacy shows significant predictive power for resilience (β = .525, p &lt; .001). Although functional perfectionism did not significantly predict resilience, a marginal negative relationship was found between dysfunctional perfectionism and resilience (β = - .156, p = .063). The results are discussed concerning their implications for music pedagogy and teacher intervention.

Some evidence suggests that personality types are a useful construct to understand stress and coping. However, further research is needed, especially on academic stress. Our aim was to explore how personality types and gender relate to coping strategies for academic stress and perceived coping efficacy. A total of 810 university psychology students completed the NEO-FFI Inventory and the Coping Strategies Inventory. Post-hoc tests for MANOVA and ANOVA were performed, where personality types and gender were treated as predictors and use of coping strategies and perceived coping efficacy as criteria. Finally, a one-way ANOVA followed by post hoc comparisons was performed to analyse the associations between personality types and perceived coping efficacy. Those with personality types combining low neuroticism with high conscientiousness chose the most adaptive coping strategies and showed the highest levels of perceived coping efficacy, while those whose personality types combined high neuroticism with low conscientiousness opted for maladaptive coping strategies and presented the lowest level of perceived coping efficacy. As for gender, women chose emotional expression more frequently. The personality type classification provided useful information on individual differences in coping with academic stress, which can help guide specific strategies to manage it.

The phenomena of electrical conductivity and electromigration in metallic systems are related, since in both cases the basic physical process is the scattering of conduction electrons by metal ions. Numerous searches have been made for equations connecting the conductivity with electromigration. In the case of a liquid metal, when using the Drude-Sommerfeld (DS) conduc-tivity equation, it was not possible to obtain a quantitative relationship between these phenomena, which would be correct. Attempts to find such a relationship when taking into ac-count the N. Mott correction (g - factor) in the DS equation were unsuccessful. This article proposes a different correction (b - factor) to the DS equation, which takes into account the pos-sibility of varying the momentum transferred by the conduction electron to a metal ion during the scattering. This correction allows to establish a quantitative relationship between conductivity and electromigration, as well as between electromigration in various binary systems with common components, in agreement with experiment. The proposed theory describes well, in particular, two- and multi-component metal systems of any concentration (the consistency rule for triangles A-B, B-C, C-A). The value of b - factor smoothly changes depending on the heat of vaporization of the metal, per unit volume.

Although sarcopenia is known to be a risk factor for non-alcoholic fatty liver disease (NAFLD), whether NAFLD is a risk factor for the development of sarcopenia is not clear. We investigated bidirectional relationships between NAFLD and low skeletal muscle mass index (LSMI) using three different datasets. Participants were classified into LSMI and normal groups. LSMI was defined as a body mass index (BMI)-adjusted appendicular skeletal muscle mass &lt;0.789 in men and &lt;0.512 in women or as the sex-specific lowest quintile of BMI-adjusted total skeletal muscle mass. NAFLD was determined according to NAFLD liver fat score or abdominal ultrasonography. The NAFLD groups showed a higher hazard ratios (HRs) with 95% confidence intervals (CIs) for LSMI than the normal groups (HRs=1.213, 95% CIs=1.050–1.402). The LSMI groups also showed a higher HRs with 95% CIs for NAFLD than normal groups (HRs=1.564, 95% CIs=1.378–1.775). Participants with NAFLD had consistently less skeletal muscle mass over 12 years of follow-up. In conclusion, LSMI and NAFLD showed a bidirectional relationship. Maintaining muscle mass should be emphasized in the management of NAFLD.