One way to reduce the negative impact of human activity on the natural environment is to use natural, easily available and relatively cheap to produce compounds in industrial processes. One such compound is naturally occurring calcium carbonate (CaCO3). This compound has adsorption properties so that it can be an alternative to commonly used adsorbents. The aim of this work is to determine the possibility of using CaCO3 to remove pharmaceutical substances such as sulfadiazine and tetracycline from water. The CaCO3 used in this work was synthesised using our own method, which allows the production of CaCO3 particles with nanometric size. In the conducted research, calcium carbonate was used in the form of a suspension in purified solutions and as an inorganic filling of the developed membranes. The mass of pharmaceutical substances removed from their aqueous solutions was determined in the tests carried out. Based on the results obtained, it can be concluded that CaCO3 has the ability to adsorb both tetracycline and sulfadiazine. In suspension tests, the mass of the removed substances per unit mass of adsorbent was 1.52 mg/g and 6.85 mg/g, respectively. In turn, in the case of the process using the developed membranes, the mass of the removed substances per unit mass of adsorbent was 232 mg/m2 and 524 mg/g, which is a several times greater increase in the mass of the removed substance compared to the process using an unmodified membrane.

Keywords: pelvic ultrasound, follicle number per ovary, FNPO, ovarian volume, PCOM, upper normal limits, referral population

The development of accurate dynamic battery pack models for electric vehicles (EVs) is critical for the ongoing electrification of the global automotive vehicle fleet, since these serve as a key element in the energy performance of an EV powertrain system. The Equivalent Circuit Model (ECM) technique at the cell level is commonly employed for this purpose, combining accuracy and efficiency in the representation of battery operation within the broader powertrain system. In this study, a second-order ECM model of a battery cell is being developed using Modelica, an equation-based modeling language. Parameter lookup tables at multiple levels of state of charge (SoC), extracted from Li-ion battery cells with 4 different commonly used cathode materials, have been utilized. This approach allows for a representation of the battery systems that are used in a wide range of commercial EV applications. To verify the model, an integrated EV model is developed and simulation results of the FTP75 driving cycle have been compared against an equivalent application in MATLAB Simulink. The findings demonstrate a close match between the results obtained from both software across different system points. Specifically, the maximum deviation of SoC is limited to 0.08% and the maximum value of relative voltage deviation is 1.4%. The verified model enables the exploration of multiple possible architecture configurations of EV powertrains with Modelica.

Fires constitute a significant threat due to the pollutants emitted and the destruction they cause. People who take part in fire-fighting operations must be equipped with appropriate tools, including special clothing that will allow them to work and guarantee safety. One of the threats are compounds from the PAH group, which are characterized by high toxicity and carcinogenicity. Therefore, it is important that the materials used constitute a barrier to contamination. Various materials from which individual elements of special firefighter's clothing are made were tested. Additionally, the importance of height on the possibility of sorption of PAH compounds on a given type of material was analyzed. Based on the results obtained, it was found that the type of material and the zone in which the clothing items are used are important in the sorption processes of pollutants. Data in this area may be important for taking further actions regarding the modification of materials used in special fire brigade clothing and in their cleaning processes.

Continuous technological progress places significant demands on the materials used in increasingly modern devices. An important parameter is often the long-term thermal resistance of the material. The use of heat-resistant polymer materials worked well in technologically advanced products. An economically justified direction in searching for new materials is the area of polymer nanocomposite materials. It is necessary to appropriately select both the polymer matrix and the nanofillers best able to demonstrate the synergistic effect. A promising area of exploration for such nanocomposites is the use of organosilicon polymers, which results from the unique properties of these polymers related to their structure. This review presents the results of the analysis of the most important literature reports regarding organosilicon polymer nanocomposites with increased thermal resistance. Particular attention was paid to modification methods of silicone nanocomposites focused on the increase of their thermal resistance related to the modification of siloxane molecular structure and by making nanocomposites using inorganic additives, carbon nanomaterials. Attention was also paid to such important issues as the influence of the dispersion of additives in the polymer matrix on the thermal resistance of silicone nanocomposites and the possibility of modifying the polymer matrix and permanently introducing nanofillers thanks to the presence of various reactive groups. The thermal stability mechanism of these nanocomposites was also analysed.

The weight coefficients of the diaphragm spring depend on experiences in the traditional optimization. However, this method not only cannot guarantee the optimal solution but it is also not universal. Therefore, a new optimization target function is proposed. The new function takes the minimum of average compress force changing of the spring and the minimum force of the separation as total objectives. Based on the optimization function, the result of the clutch diaphragm spring in a car is analyzed by the non-dominated sorting genetic algorithm (NSGA-II) and the solution set of Pareto is obtained. The results show that the pressing force of the diaphragm spring is improved by 4.09%by the new algorithmand the steering separation force is improved by 6.55%, which has better stability and steering portability. The problem of the weight coefficient in the traditional empirical design is solved. The pressing force of the optimized diaphragm spring varied slightly during the abrasion range of the friction film, and the manipulation became remarkably light.

In the former mining district of La Carolina (southern Spain), waste materials were accumulated without first waterproofing the substrate. Additionally, these mining dams were abandoned without any type of restoration, conditions that present a significant risk of contaminating the surrounding soils and waters. Prior to carry out the necessary works for isolating these residues, morphological characterization of the contact with the base substrate is needed. For that purpose, in recent years, different indirect study techniques have been used, among which electrical to-mography stands out. In this work, a less common geophysical technique, magnetometry, both in its magnetic and gra-diometric modalities, is used as an alternative method to analyse the geometry and structure of a mining dam. The results obtained with this methodology are compared with the results provided by electrical techniques, as well as with direct data from mechanical surveys and aerial photo-graphs prior to waste deposition. The magnetic anomaly curves obtained with geometric models generated with the Mag2dc program were also analysed. This comparative study shows the use-fulness of magnetic prospecting in characterizing the base geometry of these mining structures and therefore the interest in its application to environmental characterization studies.

Background: Sensor usage in the classical scientific process has allowed new experimentation in medicine. We report on the design process of a MEMS sensor being used for muscle trauma evaluation in diagnosing acute compartment syndrome (ACS), a medical ailment costing society billions of dollars per year. Objectives: Modeling the disease with scientific process allows a more complete under-standing of the disease. The goal was to formulate a hypothesis that could be tested to aid in making the diagnosis of ACS accurately. Methods: Scientific process was observed throughout the disease modelling process. Background information was improved and clarified, new pre-clinical models were de-signed and verified, a hypothesis built on pressure measurement with MEMS sensors was carried out, and the testing of the model as verified against previous clinical data was accomplished. Results: Scientific process resulted in hypothesis generation around the relationship of intracompartmental pressure measurement and the disease process and therapy. This resulted in new understanding of ACS, accurate modelling, and sensor design resulting in a MEMS device that has an extremely high sensitivity and specificity (over 99%) in treating and diagnosing the disease. Conclusion: MEMS sensor technology defines the new gold standard of implanting a sensor in a muscle compartment that allows accurate diagnosis of ACS with continuous trends in pressure.

A drug repositioning effort supported the possible use of the anti-HIV drug etravirine as a treatment for Friedreich Ataxia (FRDA). Etravirine increases frataxin protein and corrects the biochemical defects in cells derived from FRDA patients. Because of these findings, and since etravirine displays a favorable safety profile, we conducted this pilot open-label phase 2 clinical trial assessing the safety and potential efficacy of etravirine in FRDA patients. Thirty-five patients were stratified into 3 severity groups and randomized to etravirine 200 mg/day or 400 mg/day. They were treated for 4 months. Efficacy endpoints were represented by changes in peak oxygen uptake and workload as measured by incremental exercise test, SARA score, cardiac measures, measures of QoL and disability. Data were collected 4 months before the start of the treatment (T-4), at the start (T0), at the end (T4) and 4 months after the termination of the treatment (T+4). Etravirine was well tolerated. Etravirine completely stopped the progression of the SARA score during the 4-months treatment period, compared to the 4 months pre and post treatment. It increased peak workload, while the improvement of peak oxygen uptake was not statistically significant. No changes in the cardiac measures were observed. Health and QoL measures showed a worsening at the suspension of the drug. In this open trial etravirine significantly improved neurological function and was generally safe and reasonably tolerated. This suggests that etravirine represents a potential therapeutic agent in FRDA deserving testing in a randomized placebo controlled clinical trial.

Maintaining sufficient levels of plant nutrients in the soil and controlling certain heavy metals, which can be toxic to the environment, are critical to ensure sustainable agricultural production. The study aimed to assess the linkage of crop-specific agricultural practices established by farmers in the Kvemo Kartli region (Georgia) with metal accumulation in soils of agricultural lands being subject to influence from polluted irrigation water in the past. In particular, we tried to identify the primary sources of micronutrients, including iron (Fe), copper (Cu), manganese (Mn), nickel (Ni), and zinc (Zn), and toxic elements such as cadmium (Cd) and lead (Pb), and share of the contaminated irrigation water and other factors related to agricultural practices under different land uses, such as intensive and extensive arable farming, vineyards, orchards, and permanent pastures having the least disturbed soil. Based on principal component analysis, five primary sources were identified and categorized according to farmers' interviews and previous studies conducted in the region. The results showed that increased concertation of plant-available Cu, Zn, Cd and Pb were mainly associated with irrigation water and intensive use of fungicides; Fe, Mn, and Ni were closely linked to several factors, such as the mineralogical composition of soils, mineral and organic fertilizers inputs, and atmospheric deposition from diffuse sources, where exhausts from transport are probably the primary source. During our study, we attempted to differentiate irrigation water inputs from fungicides using simulation based on irrigation pattern and irrigation water quality on the one hand and fungicide application rate and their metal content on the other. The simulation revealed that the intensive application of fungicides, especially in vineyards, is more significant in enriching soils with Cu and Zn than irrigation water. Identification of factorial dependences was supported by statistical analysis and application of a number of contamination assessment methods: Contamination Factor (CF), Pollution Load Index (PLI), single-factor Pollution Index (PI), Nemerow’s comprehensive pollution index (PIN), Enrichment Factor (EF), and Geo-Accumulation Index (Igeo). Applied environmental indices indicate that the soils under the former and existing vineyards are the most enriched with Cu and Zn, highlighting the significance of agricultural practices on heavy metals accumulation in soils of agricultural lands.

This article examines the evolution of the most extensively researched subjects in E-mobility during the previous two decades. The objective of this analysis is to identify the lessons that the State of Kuwait, which is falling behind other nations in E-mobility, can absorb in its efforts to embrace adoptions of electric vehicles (EVs). To strengthen the body of knowledge and deter-mine the most effective and efficient route to an "EV-ready" nation, the authors compiled data on the latest developments in the EV industry. A bibliometric analysis was performed on 3,962 articles utilizing the VOSviewer software, which identified six noteworthy clusters that warranted further attention. Additionally, we examine the sequential progression of these clusters as follows: 1. The environmental ramifications of electric mobility; 2. Advancements in electric vehicle technology, including range extension and soundless engines; and capital (CAPEX) and operational (OPEX) expenditures of purchasing and operating EVs. 3. Concerns regarding effectiveness and durability of EV batteries, 4. Availability of EV charging stations and grid integration, 5. Charging time, and finally 6. Origin and source of the energy utilized in the development of e-mobility. We are of the opinion that by delineating the critical aspects of e-mobility development, policymakers and decision-makers in Kuwait will be better equipped to formulate timely and economical choices pertaining to sustainable transportation.

The Maastricht VI/Florence consensus recommends, as one of the measures to enhance the efficacy of Helicobacter pylori (H. pylori) infection eradication, a personalized treatment approach involving the selection of an antimicrobial agent based on the pre-determined resistance of H. pylori. To meet the need to develop test systems for personalized drug selection, we conducted a study of H. pylori molecular resistance in Moscow using a self-developed Sanger sequencing test platform. We validated our test system on 25 pure culture samples of H. pylori with known resistance. Sensitivity and specificity for detecting resistance to clarithromycin was 100%, and to levofloxacin - 93% and 92%, respectively. Then we tested our platform on 112 H. pylori -positive patients who had not previously received proton pump inhibitors (PPI) or antibacterial drugs. Mutations indicating resistance to clarithromycin were found in 27 (24%) samples, and to levofloxacin in 26 (23%) samples. Double resistance was observed in 16 (14%) samples. The most common mutations leading to clarithromycin resistance were 2143G and 2142G, to levofloxacin resistance – 261A and 271A in the gyrA gene, which account for 69% of all identified genetic determinants in levofloxacin-resistant bacteria. Thus, a personalized approach to the selection of H. pylori eradication therapy based on the detection of bacterial resistance before prescribing first-line therapy could help avoid the prescription of ineffective H. pylori eradication therapies and, overall, contribute to the control of antibiotic resistance of H. pylori.

Despite available global efforts and funding, Tuberculosis (TB) continues to affect a considerable number of patients worldwide. Policy makers and stakeholders set clear goals to reduce TB incidence and mortality, but the emergence of multidrug-resistant TB (MDR-TB) and extensively drug-resistant TB (XDR-TB) complicate the reach of these goals. Drug-resistance TB needs to be diagnosed rapidly and accurately to effectively treat patients, prevent the transmission of MDR-TB, minimise mortality, reduce treatment costs and avoid unnecessary hospitalisations. In this narrative review, we provide a comprehensive overview of laboratory methods for detecting drug resistance in MTB, focusing on phenotypic, molecular and other drug susceptibility testing (DST) techniques. We found a large variety of methods used, with the BACTEC MGIT 960 being the most common phenotypic DST and the Xpert MTB/RIF being the most common molecular DST. We emphasise the importance of integrating phenotypic and molecular DST to address issues like resistance to new drugs, heteroresistance, mixed infections and low-level resistance mutations. Notably, most of the analysed studies adhered to the outdated definition of XDR-TB and did not consider the pre-XDR definition, thus posing challenges in aligning diagnostic methods with the current landscape of TB resistance.

Electrochemical methods are used for the treatment of both municipal and industrial wastewater, either independently or in conjunction with biological methods. This conjunction is used for pretreatment or posttreatment of biologically treated wastewater. In our work, we focused on the combination of these processes, where pre-electrolysis was used to produce dissolved iron before the activation process. Electrolysis was also directly introduced into the activation using either iron or carbon electrodes. The surface of one iron electrode was 32.2 cm2, the applied voltage was 21 V, and the supplied current was 270 mA. The surface of one carbon electrode was 7.54 cm2, the supplied current was 82.5 mA, and the applied voltage was 21 V. From laboratory research on the treatment of synthetic municipal wastewater using a combination of electrolysis and activation processes, it resulted that the use of iron electrodes increased the efficiency of phosphorus removal compared to its precipitation with iron salts. The electrolysis had a positive effect on the sedimentation properties of sludge and the destruction of filamentous microorganisms. Electrolysis negatively affected the respiration rates of activated sludge and the efficiency of denitrification. However, it did not have a negative impact on the nitrification activity of the sludge.

The design and operation of quantum networks are both decisive in the current push towards a global quantum internet. Although space-enabled quantum connectivity has already been identified as a beneficial candidate for long-range quantum channels for over two decades, the architecture of a hybrid space-ground network is still a work in progress. Here, we propose an analysis of such a network based on a best-path approach, where either fiber- or satellite-based elementary links can be concatenated to form a repeater chain. The network consisting of quantum information processing nodes, equipped with both ground and space connections, is mapped into a graph structure, where edge weights represent the achievable secret key rates, chosen as the figure of merit for the network analysis. A weight minimization algorithm allows identifying the best path dynamically, i.e., as the weather conditions, stray light radiance, and satellite orbital position changes. From the results we conclude that satellite links will play a significant role on the future large-scale quantum internet, and both a constellation of satellites and significant advances in filtering technology are required to fulfill continuous coverage.

A single mode waveguide grating coupler based on multiple Si-SiO₂ pairs onto Si substrate has been designed. Numerical analysis has been carried out to calculate optimum thickness of the layers of Si-SiO₂ that ensures the constructive interference between reflected waves and actual guided wave for high coupling efficiency. Based on the results, an optimal design is developed and modeled by using a 2-D finite difference time domain (2-D FDTD) simulator that dictates a coupling efficiency of as much as 78% (-1.07 dB) at the wavelength of 1550 nm, and a 1-dB bandwidth of 77 nm. The numerical method will be useful to calculate the optimum thicknesses of the layers for any reflector based grating coupler of different materials.

In this paper, the synthesis of two novel luminescent Eu3+ ion complexes [Eu(TFT)3(phen) (1) and Eu(TFT)3(bpy)•Hex (2)] based on the combination of 2-(2,2,2-trifluoroethyl)-1-tetralone (TFT), containing n-donor ligands (1,10-phenanthroline or 2,2'-Bipyridine) and Eu3+ ion is reported herein, and their structural features are discussed on the basis of X-ray crystallographic and thermal analyses. We observed that the ligands transfer energy effectively to the metal center by fluorescence, IR and UV spectrograms studies. The structures and properties of complexes 1-2 were optimized by the DFT theoretical calculation, and the calculation results were consistent with the experimental X-ray structure data and spectral analysis.

The strong competition in the automotive industry has required manufacturers to implement lean production, both with methods and techniques specific to Industry 4.0. At the same time, universities must provide graduates with specific skills for applying these new production methods and techniques. In this context, a Lean Learning Factory was developed in the Pitesti University Center, which allows students to learn, experiment, and research, in an environment similar to that of enterprises, the new Lean Manufacturing methods and techniques, and Industry 4.0. The research presented in this study had as its objective identifying the minimum number of repetitions necessary to train operators who serve two differently organized workstations, one classic, the other including digital techniques, but on which the same assembly operation is performed. Several indicators were considered in the analysis, such as the number of errors, the number of stops, the effective duration of the work cycle, and the percentage ratio between the standard duration of cyclical activities and the effective duration of the work cycle. The evolution of these indicators was mathematically modelled by regression functions, using the least squares method. The obtained results also highlight the usefulness of applying the DOJO method as a Lean manufacturing-specific learning technique and the efficiency of implementing digital techniques in work organization.

Hybrid Renewable Energy Systems (HRES) integrate renewable sources, storage, and optionally conventional energies, offering an eco-friendly solution to fossil fuels. Microgrids (MGs) bolster HRES integration, enhancing energy management, resilience, and reliability at various levels. This study, emphasizing the need for refined optimization methods, investigates three themes: renewable energy, microgrid, and multiobjective optimization (MOO), through a bibliometric analysis of 470 Scopus documents from 2010-2023, analyzed with SciMAT software. It segments the research into two periods, 2010-2019 and 2020-2023, revealing a surge in MOO focus, especially in the latter period, with a 35% increase in MOO-related research. This indicates a shift towards com-prehensive energy ecosystem management that balances environmental, technical, and economic elements. The initial focus on MOO, genetic algorithms, and energy management systems has expanded to include smart grids and electric power systems, with MOO remaining a primary theme in the second period. The increased application of Artificial Intelligence (AI) in optimizing HMGS within the MOO framework signals a move towards more sustainable, intelligent energy solutions. Despite progress, challenges remain, including high battery costs, the need for reliable MOO data, the intermittency of renewable energy sources, and HMGS network scalability issues, highlighting directions for future research.

Lactoperoxidase system (LPS) effect on quality of raw and pasteurized milk under real conditions along the dairy value chain in Ethiopia was evaluated. A total of 250 milk samples were collected from farmers, collectors, and factories. Experimental samples were LPS-activated of morning and overnight milk. The samples were tested with several chemical and microbiological tests such as total bacterial count (TBC), total coliform count (TCC) and Escherichia coli count (EC). Results indicated that all LPS-activated milk samples had a higher quality than all the control samples. For instance, both the morning and overnight farm milk samples had a mean TBCs of 5.79 log and 6.55 log cfu/ml which is significantly (p

An imbalance between production and excretion of amyloid β peptide (Aβ) in the brain tissues of Alzheimer’s disease (AD) patients leads to Aβ accumulation and formation of noxious Aβ oligomers/plaques. A promising approach to AD prevention is reduction of free Aβ level by directed enhancement of Aβ binding to its natural depot, human serum albumin (HSA). We previously demonstrated the ability of specific low-molecular-weight ligands (LMWLs) of HSA to improve its affinity for Aβ. Here we develop this approach by bioinformatic search for the clinically approved AD-related LMWLs of HSA, followed by classification of the candidates according to the predicted location of their binding sites on HSA surface, ranking of the candidates, and selective experimental validation of their impact on HSA affinity for Aβ. The top 100 candidate LMWLs were classified into the five clusters. The specific representatives of the different clusters exhibit dramatically different behavior, with 3- to 13-fold changes in equilibrium dissociation constants for the HSA-Aβ40 interaction: prednisone favors HSA-Aβ interaction, mefenamic acid shows the opposite effect, while levothyroxine exhibits the bidirectional effects. Overall, the LMWLs of HSA chosen here provide a basis for drug repurposing for AD prevention, and for search for the medications promoting AD progression.

Reservoirs created by damming rivers significantly modify the environment and problems may arise: the storage of nutrients and organic matter in reservoirs often leads to decreased water quality due to eutrophication. Reservoirs built on lowland rivers are exposed to significant nutrient loads, often leading to eutrophication. In this article, the Sulejów Reservoir, in Central Poland, was the subject of the research, which focused on the use of Sentinel-2 remote sensing data to detect phytoplankton blooms, and on understanding the pattern of wind-driven surface currents using the CCHE2D model (a depth-averaged hydrodynamic model). The calculation of the total phosphorus load has shown that the reservoir mainly acts as nutrient storage. Still, during the low flow and intensive phytoplankton bloom, it can be a source of nutrients. The distribution of phytoplankton bloom on the Sulejów Reservoir was documented using eight Sentinel-2 satellite images from the vegetation season of 2020 and the Normalized Difference Chlorophyll Index (NDCl). Coupling remote sensing data and numerical modelling helps to interpret the hydrodynamic model results and understand nutrients and sediment dynamics within the reservoir. Hydrodynamic modelling combined with remote sensing data can be a valuable tool for selecting appropriate locations for water quality measurements at monitoring stations.

The numerical simulation of entropy generation at mixed natural free and forced convection flow in a square lid-driven cavity filled with an eletrically conducting binary fluids saturated porous media in the presence of a magnetic field is performed in this investigation. Both the top and bottom horizontal walls of the cavity are kept at constant and different temperatures while the left and right vertical walls are adiabatic and insulated. The magnetic field is applied in normal direction to the cavity. The Darcy model, including Brinkman term relative to viscous effects and Forchheimer term due to inertial forces, is used for the momentum equations, and the SIMPLER algorithm, based on the control volume finite-element method approach is used to solve the pressure –velocity coupling. The flow pattern and the heat transfer characteristics inside the cavity are presented in the form of isotherms, streamlines and isentropic lines and average Nusselt number trend. The entropy generation rate is determined for various values of Darcy number (10^-3 ≤ Da ≤ 1) and for a range of Hartmann number (0 ≤ Ha ≤ 10²). This study is limited to Pr = 7 which corresponds to water. It is observed that entropy generation is very affected by the variations of dimensionless control parameters considered.

Heparins, Unfractionated or Low Molecular Weight, are permanently at the spotlight of both clinical indications and laboratory monitoring. An accurate drug dosage is necessary for an effi-cient and safe therapy. The one-stage anti-FXa kinetics’ assays are the most widely and universally used with full automation for large series, without needing exogenous Antithrombin. WHO in-ternational standards are available for UFH and LMWH, but external quality assessment surveys still report a high inter-assay variability. This heterogeneity results from: assay formulation, designed without or with dextran sulfate to measure all heparin in blood circulation; calibrators for testing UFH or LMWH with the same curve; and automation parameters. The various factors which impact heparin measurements are reviewed, and we share our experience to optimize assays for completely testing plasma heparin. Evidence is provided on the usefulness of low molecular weight dextran sulfate to mobilize all drug present in blood circulation. Other key factors concern adjustment of assay conditions to obtain fully superimposable calibration curves for UFH and LMWH, and automation parameters. The study is illustrated by the performances of the various anti-FXa assays used for testing heparin on UFH or LMWH treated patients’ plasmas and obtained using citrate or CTAD anticoagulants. Comparable results are obtained only when CTAD anti-coagulant is used. Using citrate UFH is underestimated in the absence of dextran sulfate. Heparin calibrators, adjustment of automation parameters and data treatment contribute to other smaller differences.

Among other fossil fuels, natural gas is a major energy source. It is generally created saturated with water vapor. Dehydration of natural gas is vital in the gas business to remove water vapor from the gas supply, which may cause hydrate development in pipes. Gas dehydration employs Tri ethylene glycol (TEG) to remove water vapor from natural gas flow. The wet gas is dehydrated with lean glycol in an absorber, and the rich glycol is recovered and reused. This work investigates the use of dry natural gas instead of nitrogen in the glycol dehydration re-generator, and compares the results using HYSYS modeling and simulation. The two techniques were compared for capital and utility expenses, while maintaining the identical glycol purity criteria. The wet gas from the stripping mechanisms may also be utilized to run steam pumps and compressors or recycled. The model is based on the real mechanism flow diagram. Finally, the findings of this model might be used to design a new heat and material balance for the plant.

High hopes were associated with the new anti-angiogenic medicament, bevacizumab, which due to the possibility of binding to isoform A of vascular endothelial growth factor (VEGF), inhibited the creation of new blood vessels. However, not only blood vessels are responsible for the tumor cells' spread. During the process of tumor growth, lymphangiogenesis is mediated by other isoforms of the VEGF family, specifically VEGF-C and VEGF-D, which are independent of the bevacizumab action. Therefore, based on the mechanism of bevacizumab action and the processes of angio- and lymphangiogenesis, we formed three hypotheses: 1) if the lymph nodes in the primary ovarian cancers are metastatic, the outcome of bevacizumab treatment is worsened; 2) concerning the second-line treatment, bevacizumab will act in a weakened manner if the recurrence occurs in lymph nodes compared to local recurrences; 3) patients treated by bevacizumab are more likely to have recurrences in lymph nodes. These hypotheses raise the issue of the existing gap of knowledge, which concerns the effect of bevacizumab on the metastatic lymph nodes.

Extraction techniques of important bioactive molecules from the major concern of Seafood byproducts are getting emphasis for better valorization. Employing green extraction technologies for efficient and quality production of these bioactive molecules is also strictly required. Hence, understanding the extraction process parameters to effectively design an applicable optimization strategy could make this real. In this review, statistical optimization strategies applied for the extraction process parameters of bioactive molecules from Seafood byproducts are focused. The type of experimental designs, and techniques applied to criticize and validate the effects of independent variables on the extraction output was addressed. Dominant parameters studied were enzyme/substrate ratio, pH, time, temperature and power of extraction instruments. The yield of bioactive compounds, chitin and chitosan, proteins and peptides, enzymes and carotenoids (Astaxanthins) were the most studied responses. Efficiency and/or economic and quality considerations and their selected optimization strategies that favour the production of potential bioactive molecules were also reviewed.

This paper presents the deformation of the joined sheet after the clinch-riveting process. The DX51D steel sheet with zinc coating was used. The samples to be joined with clinch riveting technology had a thickness of 1±0.05 mm and 1.5±0.1 mm. The sheet deformation was measured before and after the joining process. The rivet was pressed in the sheets with the same dimension between the rivet axis and three sheet edges: 20, 30 and 40 mm. For fixed segments of the die, from the rivet side close to the rivet, the sheet deformation was greater than that of the area with movable segments. The movement of die sliding element caused more sheet material to flow in the space between the fixed part of the die and movable segments. Hence, the sheet deformation in these places was smaller than for the die fixed element – sheet material was less compressed. For sheets thickness 1.5 mm and width 20 mm, the bulk of the sheet was observed. For a sheets width of 20 mm, it was observed that the deformation of the upper and lower sheets in the area of the rivet is greater than for sheets width of 30 or 40 mm.

The most important plastic resins used for wire coating are Polyvinyl Chloride (PVC), Nylon, Polysulfone and Low-high density polyethylene (LDPE / HDPE). In this article,the coating process is performed using elastic-viscous fluid as a coating material for wire coating in a pressure type coating die. The elastic-viscous fluid is electrically conducted in the presence of an applied magnetic field. The governing non-linear equations are modeled and then solved analytically by utilizing an Adomian decomposition method (ADM). The convergence of the series solution is established. The results are also verified by Optimal Homotopy Asymptotic Method (OHAM). The effect of different emerging parameters such as non-Newtonian parameters α and β, magnetic parameter M and the Brinkman number Br on solutions (velocity and temperature profiles) are discussed through several graphs. Additionally, the current result also compares with the published work already available in the literature.

Hydrogen has a leading role in accomplishing a net zero green-house gas emission future. Today’s challenge is producing green hydrogen to cover the fuel demand of transportation and industry, to gain independence from fossil fuels. This review’s goal is to demonstrate critically the existing methods of biomass treatment and assess their ability to scale up. Biomass is an excellent hydrogen carrier and biomass-derived processes are the main target for hydrogen production as it is an innovative pathway to green hydrogen production. Comparing the existing processes, thermochemical treatment is found to be far more evolved than biological or electrochemical treatment especially with regard to scaling prospects.

Ever since the virus was discovered in the 80s of the 19th century, plant viruses had a great impression within the field of plant pathology. In this book we trace the growth in the research on plant viruses beginning from traditional era (1882-1900) in which a new pathogen was discovered other than fungi and bacteria, later known as virus; biological era (1900-2000) in which the mode of spread and relationship of the virus with its vector was understood; biochemical/biophysical era (1930-1968) that marked the basis of virus purification and chemical characterization; molecular era of plant virology (1943-1995) in which establishment, progression & transmission of plant viruses was described within the host at molecular details ; era of viral molecular genetics (1980–2000), in which a significant role was played by the plant virologists to understand the position and function of genes, methods of viral gene cloning, gene silencing and other viral genome associated properties ; era of plant viral diagnostics (1980 – 2021) which led to rapid, specific and sensitive detection of plant viruses.

Despite being stored at 113 K and atmospheric pressure, LNG cold potential is not exploited to reduce green ships’ energy needs. An innovative system based on three Organic Ranking Cycles integrated into the regasification equipment is proposed to produce additional power and recover cooling energy from condensers. A first-law analysis identified ethylene and ethane as suitable working fluids for the first and the second ORC making available freshwater and ice. Propane, ammonia and propylene could be arbitrarily employed in the third ORC for air-conditioning. An environmental analysis that combines exergy efficiency, ecological indices and hazard aspects for marine environment and ship’s passengers, indicated propylene as safer and more environmentally friendly. The exergy analysis confirms more than 20% of the LNG potential can be recovered from every cycle to produce a net clean power of 76 kW, whereas 270 kW can be saved by recovering condensers' cooling power to satisfy some ship needs. Assuming the sailing mode, a limitation of 162 kg in LNG consumptions was determined, avoiding the emission of 1584 kg of CO2 per day. Marine thermal pollution is reduced by 3.5 times by recovering the working fluids' condensation heat for the LNG pre-heating.

The objective of this study was to analyze the mental workload using EEG and eye tracking data and classify it using machine learning algorithms. The machine learning model was developed based on the simultaneous recording of eye tracking and EEG measurements during the experimental process. The experiments involved 15 university students, consisting of 7 women and 8 men. Throughout the experiments, the researchers utilized the n-back memory task and the NASA-Task Load Index (TLX) subjective rating scale to assess various levels of mental workload. The findings revealed that as the task difficulty increased, there was an increase in the diameter of both the right and left pupils, the number of fixations, the number and duration of saccades, and the number and duration of blinks. Conversely, variables related to fixation duration decreased. The EEG results indicated that theta power in the prefrontal, frontal, and front central regions increased with task difficulty. Additionally, alpha power increased in the frontal regions but decreased in the temporal, parietal, and occipital regions as the task became more challenging. Furthermore, low beta power significantly decreased in almost all brain regions as the task difficulty increased. In terms of the four-class classification problem, the mental workload level can be predicted with an accuracy rate of 76.59% using 34 selected features. This study has made a significant contribution to the literature by presenting a four-class mental workload estimation model that utilizes different machine learning algorithms.

This paper presents the results of quantitative research examining the impacts of demographic and socioeconomic factors on community resilience to disasters. The survey was carried out utilising a questionnaire distributed and subsequently collected online from 321 participants during January 2024. The study employed an adapted version of the '5S' social resilience framework, encompassing five sub-dimensions – social structure (10 variables), social capital (9 variables), social mechanisms (17 variables), social equity and diversity (13 variables), and social belief (13 variables). This customized framework includes 62 indicators, providing a thorough assessment of community (social) disaster resilience in the research context. To explore the relationship between predictors and community (social) disaster resilience in Serbia, their attitudes towards the mentioned five sub-dimensions, as well as their engagement in preventive measures and their perception of resilience to various disasters with a particular focus on demographic and socio-economic impacts, statistical methods including t-tests, one-way ANOVA, Pearson’s correlation, and multivariate linear regression were employed. The results of the multivariate regressions across various community disaster resilience subscales indicate that age emerged as the most significant predictor for the social structure subscale. At the same time, education stood out as the primary predictor for the social capital subscale. Additionally, employment status proved to be the most influential predictor for both social mechanisms and social equity-diversity subscales, with property ownership being the key predictor for the social beliefs sub-scale. Despite being considered in the analyses, gender, marital status, income level, and number of household members did not emerge as the most significant predictors across the investigated community (social) disaster resilience subscales. The determined mean value of the community (social) disaster resilience index is M = 2.62, and the findings reveal that participants assigned the highest ratings to the social beliefs subscale (M = 2.76), while the lowest values were observed in the social structure subscale (M = 2.46). Findings can be used to create strategies and interventions aimed at enhancing the resilience of communities in Serbia by addressing the intricate interplay between demographic characteristics, socio-economic factors, and their ability to withstand, adapt to, and recover from different disasters.

Warren Weaver, writing about the function that science should have in mankind’s developing future, ideas and ideals, proposed to classify scientific problems into ‘problems of simplicity’, ‘problems of disorganised complexity’, and ‘problems of organised complexity’ — the huge complementary class to which all biological, human, and social problems belong. Problems of simplicity have few components and variables and have been extensively addressed in the last 400 years. Problems of disorganised complexity have a huge number of individually erratic components and variables, but possess collective regularities that can be analysed by resourcing to stochastic methods. Yet, problems of organised complexity do not yield easily to classical or statistical treatment since interrelations among phenomenon elements change during its evolution alongside commonly used state variables, affecting behaviour and outcome. Moreover, organisation, the focal point in this complementary class, is still an elusive concept despite the gigantic efforts undertaken since a century ago to tame it. This paper addresses the description, representation and study of phenomena in the ‘problems of organised complexity’ class. Grounded on relational mathematical constructs, a theoretical framework providing operational definitions and schemes for formally modelling organisations and interaction of organisations is introduced. This framework extends the general systems’ concept and provides a novel perspective for addressing organised complexity phenomena as a collection of interacting organisations.

This article develops a multi-perspective view on motivations and methods for tobamovirus purification through the ages, and presents a novel efficient, easy-to-use approach that can be well-adapted to different species of native and functionalized virions. We survey the various driving forces prompting researchers to enrich tobamoviruses: from the search for the causative agents of mosaic diseases in plants to their increasing recognition as versatile nanocarriers in biomedical and engineering applications. Best practice and also rarely applied options for the serial processing steps required for successful isolation of tobamoviruses are then reviewed. Adaptations for distinct particle species, pitfalls and 'forgotten' or underrepresented technologies are considered as well. The article is topped off with our own development of a method for virion preparation, rooted in historical protocols. It combines selective re-solubilization of polyethylene glycol (PEG) virion raw precipitates with density step gradient centrifugation in biocompatible iodixanol formulations, yielding ready-to-use particle suspensions. This newly established protocol and some considerations for perhaps worthwile further developments could serve as putative stepping stones towards preparation procedures appropriate for routine practical uses of the multivalent soft-matter nanorods.

Objective: The aim of this study was to optimize the fermentation process of Radix Ranunculi ternate via microbial fermentation and analyze the changes in the contents of the main components, the antioxidant and hypoglycemic capacities of the extract before and after fermentation. Methods: The solid-state fermentation process was optimized using single-factor tests and the response surface method, with the yield of the alcohol extract of R. ternate as an evaluation index. Results: The best fermentation process was optimized using solid-state endophytic fungus fermentation technology as follows: strain addition ratio of Chaetomium globosum/Fusarium equiseti =1:1, fermentation for 5 d, sieve size of 40 mesh, liquid/material ratio of 0.8:1 mL·g−1, fermentation temperature of 31 °C, and inoculation amount of 7.5%. Under the optimized conditions, the contents of the water-soluble extract and total polysaccharides decreased by 12.71% and 12.95%, respectively, in the fermentation, The contents of ethanol-soluble-extract, flavonoids, saponins, polyphenols, organic acids, and total amino acids of fermented R. ternate increased by 19.77%, 57.14%, 79.67%, 14.29%, 17.63% and 3.82%, respectively, and the scavenging rate for DPPH, ABTS+, ·OH free radicals and inhibitory rate for α-amylase also increased by 19.02%, 14.17%, 7.53% and 34.54%, respectively, compared with unfermented R. ternate. Conclusions: Solid-state fermentation opens new avenues for the development and application of R. ternate as natural antioxidant and hypoglycemic food.

The article presents the results of cyanide leaching of gold-containing concentrate using the trichlorocyanuric acid (TCCA) oxidizer. Gold-containing concentrate obtained from a gold tailings sample from a gold recovery factory (GRF) in one of the deposits of Kazakhstan that was not previously studied for concentrability. According to X-ray phase analysis and energy dispersive spectrometry (DSM) data, the main compounds in the tailings sample under study are: pyrite FeS2, quartz SiO2, calcite CaCO3, albite NaAlSi3O8, muscovite KAl2Si3AlO10(OH)8, dolomite CaMg(CO3)2, and oxidized iron compounds. Microscopic studies have established the presence of gold grains in free form, ranging in size from 0.9-10.2 mkm Au-ultrafine and fine gold. Obtaining a gold-containg concentrate with a gold content of 15.95 g / t is possible according to the enrichment scheme, which includes centrifugal separation, classification according to the fineness class -0.05 mm, additional grinding of hydrocyclone sands to a fineness of 90.0-95.0% of the class finer than 0.050 mm, and control centrifugal separation. Since pyrite in technogenic raw materials is the main gold-containing mineral, this paper presents studies on the oxidizability of pyrite with the TCCA oxidizer. The results of studies on the oxidation of pyrite using the TCCA oxidizer show that the products of its hydrolysis oxidize pyrite with the formation of various iron compounds on its surface. Pretreatment of gold-containing concentrate with oxidizer TCCA for 3 hours before the cyanidation process (20 hours) allows to increase the recovery of gold in the solution by 5.8 %.

The Food and Drug Administration’s 2011 Process Validation Guidance and International Council for Harmonization Quality Guidelines recommend continued process verification (CPV) as a mandatory requirement for pharmaceutical, biopharmaceutical, and other regulated industries. As a part of product life cycle management, after process characterization in stage 1 and process qualification and validation in stage-2, CPV is performed as stage-3 validation during commercial manufacturing. CPV ensures that the process continues to remain within a validated state. CPV requires the collection and analysis of data related to critical quality attributes, critical material attributes, and critical process parameters on a minimum basis. Data is then used to elucidate process control regarding the capability to meet predefined specifications and stability via statistical process control tools. In statistical process control, control charts and Nelson rules are commonly used throughout the industry to monitor and trend data to ensure that a process remains in control. In the control chart, the mean value is taken as the center line, and 3σ limits are placed on either side of the center line. In CPV, manufactured lots are summarized, trended, and discussed at a cross-functional level at pre-defined intervals (either weekly, bi-weekly, or even monthly) based on the batch run rate. A cross-functional team assesses details regarding 1) violation frequency, 2) statistical strength of the signal, 3) violation magnitude and its impact on process or quality, and 4) any potential root causes for out-of-expectation or out-of-trend signals. The cross-functional team must analyze whether any signal identified by the control chart is reliable and must determine whether corrective action should be taken and justify the decision in the CPV meeting minutes based on statistical strength and reliability of the signal. However, basic control charts are susceptible to false alarms and nuisance alarms. Therefore, it is imperative to understand the assumptions behind control charts and the inherent false alarm rates for different Nelson rules. In this article, the authors have detailed the assumptions behind the usage of control charts, the rate of false alarms for different Nelson rules, the impact of skewness and kurtosis of a data distribution on the false alarm rate, and methods for optimizing control chart design by reducing false alarm rates and nuisance signals.

This paper explores the imminent threat posed by climate change to the unique platypus species. It delves into the ecological repercussions of global temperature rise and altered climate patterns on platypus habitats. The study emphasises the multifaceted impacts, including changes in aquatic habitat quality, food sources, and breeding rituals. Climate-induced shifts in phytoplankton spring blooms and anthropogenic pressures further endanger the platypus's habitat. The article stresses the importance of understanding these effects for both species conservation and anticipating broader ecological and socio-economic consequences. Mitigating climate change impacts requires a multidimensional approach, involving habitat manipulation and restoration strategies.

Amid the swift progression of the global automobile industry, the aspiration for lightweight vehicle design has surfaced as a crucial approach to boost fuel efficiency and curtail environmental impact. The objective of this study revolves around achieving holistic optimization of vehicle structure via detailed scrutiny of vehicle process characteristics, amalgamated with a Back Propagation neural network (BPNN) optimized by a genetic algorithm (GA) and a topology optimization (TO) method.The process initiates with an examination of the vehicle's technical characteristics, succeeded by an optimization protocol that couples GA with BPNN. This exhaustive optimization procedure derives the best-fit values of design parameters and identifies the globally optimal lightweight design approach. Subsequently, a comprehensive structural optimization is actualized by modifying the topological distribution of the structure.A simulation experiment of the conceptual car body beam skeleton is conducted as a conclusive step, and the anti-collision capacity of the car body beam skeleton is assessed by measuring deformation intrusion. The findings reveal that in the vehicle topology optimization, a comparative analysis of pre and post-optimization results indicates an improved topological density across diverse sections. The topological density of the vehicle's frontal structure escalates from 0.75 to 0.8. Following optimization, the stiffness assessment records a marginal increase (within the range of 0.02–0.05), implying that the lightweight design does not compromise the general rigidity of the structure.The optimized body structure manifests superior crashworthiness in the crash test: the deformation intrusion diminishes by 27% in front-end collisions. In side impacts, the deformation and intrusion at critical points are reduced by 13.15% to 10% respectively. The comprehensive method proposed herein proves to be an efficient strategy to actualize the lightweight design of vehicles.

The blood count is crucial for assessing bone marrow's cell production and differentiation during infections, gauging disease severity, and monitoring therapeutic responses. The profile of blood count in chronic form of paracoccidioidomycosis (PCM) has been insufficiently explored. To better understand the changes in hematological cells in different stages of the PCM chronic form, we evaluated the blood count, including immature blood cells in automated equipment, before and during the treatment follow-up of 62 chronic PCM patients. Predominantly male (96.8%) with an average age of 54.3 (SD 6.9) years, participants exhibited pre-treatment conditions such as anemia (45.2%), monocytosis (38.7%), and leukocytosis (17.7%) which became less frequent after clinical cure. Anemia was more prevalent in severe cases. Notably, hemoglobin and reticulocyte hemoglobin content increased, while leukocytes, monocytes, neutrophils, immature granulocytes, and platelets decreased. Chronic PCM induced manageable hematological abnormalities, mainly in the red blood series. Monocytosis, indicating monocytes' role in PCM's immune response, was frequent. Post-treatment, especially after achieving clinical cure, significant improvements were observed in various hematological indices, including immature granulocytes and reticulocyte hemoglobin content, underscoring the impact of infection on these parameters.

In this paper, the boiling flow inside a nanochannel with 700000 argon particle has been simulated by molecular dynamics (MD) simulation. This approach has been employed to analysis the superheated flow and its heat transfer pattern as well. For all simulations an external thrust force varying from 1 PN to 12 PN is exerted on inlet nanoparticles along the channel to have the forced annular boiling flow. Computations reveal that saturation condition and superheat degree have significant impacts on the liquid-vapor interface. Furthermore, because of the major influence of surface tension throughout a nanochannel, the x-velocity of liquid film and vapor core has not considerable fluctuations and stay smooth. All provided results show the behaviors completely similar to the available outcomes in the literature.

To fulfil a need of limitation automotive emissions the reduction of vehicle weight is widely recommended and achieved in many ways, both by the construction of individual elements of the vehicle, and by the selection of light materials including Al alloys. Connecting these elements with each other and with elements made of iron alloys can be realized, inter alia, by welding or stir welding. However, the quality of the welds obtained varies widely and depends on many design, operational and environmental factors. The present study focused on a review of various welding technics used to joint both similar and dissimilar Al alloys utilized in automotive industry, the effect of various process parameters on welds quality, and phenomena appeared in such welds..

A co-curing resin system consisting of 9368 epoxy resin for prepreg and 6808 epoxy resin for resin transfer molding (RTM) was developed. A corresponding preparation method of novel polymer composite bolted T-joint with internal skeleton and external skin was proposed based on prepreg-RTM co-curing process, and novel T-joints were fabricated. A series of conventional configuration T-joints based on RTM process and T-joints made of 2A12 aluminum alloy were prepared simultaneously. Bending performances were studied on these T-joints experimentally. The results indicate that 9368 epoxy resin and 6808 epoxy resin exhibit good compatibility in rheological and thermophysical properties. The novel T-joints prepared with prepreg-RTM co-curing process show no obvious fiber local winding or resin-rich regions inside, and the interface quality between internal skeleton and external skin is excellent. The main failure modes of the novel T-joint under bending load include separation of skin and skeleton and fracture along the thickness on the base panel; the skeleton carries the main bending load, but there is still load transfer between external skin and internal skeleton through their interface. The internal damages of the novel T-joint are highly consistent with surface damages observed visually, facilitating the detection and timely discovery of damages. The initial stiffness, damage initiation load, and ultimate load of the novel T-joint are 1.65 times, 5.89 times, and 3.45 times that of conventional T-joint, respectively. When considering the influence of density, the relative initial stiffness and relative ultimate load of the novel T-joint are 1.44 times and 2.07 times that of aluminum alloy T-joint, respectively.

The purpose of this work is to describe and explain the characteristics of pedagogy as a science of education, as an object, concepts and research method. The methodology assumed was the review of the history of pedagogy, especially the classics of pedagogy, those who built it with their experiences in laboratory schools. Here are listed the main concepts of pedagogy, its laws and principles; she establishes the opposition that exists between teaching-learning and education as formation of the personality; she also delimits the fields of the pedagogical method, of didactics or teaching-learning, and the methodology of educational labor that organizes the process and the educational context, the regime and the lifestyle, such as those experienced in the "colonies" or "communes" of children and adolescents, organized and directed by Neill and Makarenko. Since the present article does not derive from a primary source or from field work, as an empirical or experimental research, the results constitute the content of the article, as conclusions.

Wafer-scale blue micro-light-emitting diode (micro-LED) arrays are fabricated with a pixel size of 12 μm, a pixel pitch of 15 μm, and a pixel density of 1692 pixels per inch, achieved by optimizing the properties of e-beam-deposited and sputter-deposited indium tin oxide (ITO). Although the sputter-deposited ITO (S-ITO) films exhibit a densely packed morphology and lower resistivity compared to those of the e-beam-deposited ITO (E-ITO) films, the forward voltage (VF) values of a micro-LED with the S-ITO films are higher than those with the E-ITO films. The VF values for a single pixel and for four pixels with E-ITO films are 2.82 V and 2.83 V, respectively, while the corresponding values for S-ITO films are 3.50 V and 3.52 V. This was attributed to ion bombardment damage and nitrogen vacancies in the p-GaN layer. Surprisingly, the VF variations of a single pixel and of four pixels with the optimized E-ITO spreading layer from five different regions are only 0.09 V and 0.10 V, respectively. This extremely uniform VF variation is suitable for realizing micro-LED displays to be used in AR and VR applications, circumventing the bottleneck in the development of long-lifespan and high-brightness organic LED devices for industrial mass production.

The Vu Gia - Thu Bon River Basin (VG-TB) is confronting numerous challenges related to water security (WS), particularly in the face of the impacts of climate change. These challenges manifest in salinity intrusion, altered rainfall patterns, and reduced water supply in downstream areas. To assess the current state of water security in the basin, the study employed statistical analysis methods, Process Analysis Method (PAM), SMART, and Analytic Hierarchy Process (AHP) to develop a comprehensive Assessment Framework for Water Security (AFWS) in the VG-TB. The AFWS encompasses five key dimensions, 17 indicators, and 28 variables, aligning with the UN-Water definition of water security and addressing the Sustainable Development Goal 6 (SDG6) criteria for global water sustainability. It also adheres to the Asian Development Bank's (ADB) approach to water security assessment as outlined in the Asian Water Development Outlook (AWDO) reports. This allows for the computation of a comprehensive Water Security Index (WSI) for specific regions, serving as a foundation for decision-making and policy formulation aimed at enhancing water security in the context of climate change and facilitating sustainable basin development in the future.

A multimodal detection system with complementary capabilities for efficient detection was developed for impurity detection. The system consisted of a visible light camera, a multispectral camera, image correction and registration algorithms. It can obtain spectral feature and color feature at the same time, and has higher spatial resolution than a single spectral camera. This system was applied to detect impurities in Pu ’er tea to verify its high efficiency. The spectral and color features of each pixel in the images of Pu ’er tea were obtained by this system and used for pixel classification. The experimental results show that the accuracy of Support Vector Machine (SVM) model based on combined features is 93%, which is 7% higher than that based on only spectral features. By applying median filtering algorithm and contour detection algorithm to the label matrix extracted from pixel-classified images, 8 impurities except hair were detected successfully. Moreover, taking advantage of the high resolution of visible light camera, small impurities can be clearly imaged. By comparing the segmented color image with the pixel-classified image, small impurities such as hair could be detected successfully. Finally, it is proved that the system can obtain multiple images to allow a more detailed and comprehensive understanding of the detected items, and has excellent ability to detect small impurities.

Micellar Casein Concentrate (MCC) is manufactured from microfiltration (MF) of skim milk utilizing ceramic or polymeric membrane filtration. While ceramic filtration has higher efficiency, use of polymeric is cost effective and the process is familiar to several US dairy processors. The aim of the present study was to develop an optimized membrane filtration process to produce MCC using spiral wound polymeric membrane filtration (SW MF) system by systematic selection of transmembrane pressure (TMP) and level of diafiltration (DF). Using skim milk as feed material, preliminary lab-scale MF experiments were conducted using 0.5 µm polyvinylidene fluoride (PVDF) membrane. Three TMP (34.5, 62.1, and 103.4 kPa) and three levels of DF (70, 100, and 150%) along with a process without DF as control were used in the study. Effect of TMP and effectiveness of DF on flux rates, SP removal, casein to total protein (CN/TKN) ratio, casein to true protein (CN/TP) ratio, rejection of casein (rej CN) and SP (rej SP) were evaluated. At all TMP values used in the study, the overall flux (O Flux) increased with the level of DF. Highest O Flux of 30.77 liter per meter square per hour (LMH) was obtained with 34.5 kPa pressure and 150% DF. The impact of DF was more pronounced at lower pressures than at the higher pressures used in the study. With controlled DF, instantaneous flux was maintained within 80% of initial flux for the entire process run. For all the experiments, casein has a rejection of 0.97 to 1.0, while serum protein has the lowest rejection of 0.10 at 34.5 kPa pressure and 150% DF level. Use of 34.5 kPa and DF level of 150 % contributed to 81.45% SP removal, and casein to true protein ratio of 0.96. SP removal data from the lab-scale experiments were fitted into a mathematical model using DF and square of TMP as factors. The model predicts SP removal within 90-95% of actual SP removal got from the pilot plant experiments.

Gender Identity Dysphoria (GID) is a condition characterized by a strong and persistent identification with the opposite sex. These people consider themselves victims of a sort of biological accident: "a soul in a wrong body". There are numerous theories on the origin of transsexualism: genetic, hormonal and psychological causes have been hypothesized, but those currently most accredited are the neuroanatomical ones. The cornerstones of hormone conversion therapy (Gender Affirming Hormone Therapy, GAHT) are feminizing hormones for transgender women (MtFs) and virilizing for transgender males (FtMs). GID can be present among adolescents and older people. For adolescents is now accepted reversible treatment of puberty withdrawal with hormones that stops the progression of pubertal development in the biological direction not accepted; for elderly people is suggested GAHT in reduced doses. Physicians should consider and discuss with people with GID about fertility preservation, general and cancer risks. We present also data of 127 transsexual patients enrolled at the Garibaldi-Nesima Andrology Clinic in Catania (Italy) from 2003 to 2020. To optimize the conversion treatment with sex hormones, transsexuals require long-term follow-up. GAHT must be performed by a doctor who is familiar with these problems. Therefore, the “do-it-yourself” trend and the lack of medical and laboratory checks over time should be absolutely discouraged. Before proceeding with the surgical sex reassignment, it is recommended to refer to an endocrinologist and psychologist or psychiatrist for a period of 2-3 years. The transition surgical conclusion process must be practiced by a quality surgical team.

The urgency of the COVID19 pandemic caused a surge in related scientific literature. This surge made the manual exploration of scientific articles time-consuming and inefficient. Therefore, a range of exploratory search applications have been created to facilitate access to the available literature. In this survey, we give a short description of certain efforts in this direction and explore the different approaches that they used.

The rapid growth in scientific article publications allows us to access articles as soon as possible. Therefore, automatic summarization systems (ATSs) are widely preferred. In most studies, the en-tire source document is expected to be summarized, just as it would be summarized by a human. Summarizing long articles, such as scientific articles, is quite difficult due to token restraint and extraction of scientific words. To address this problem, a novel Graph-Based Abstractive Summa-rization (GBAS) model is proposed, which is a novel scientific text summarization model based on SciBERT and the graph transformer network (GTN). The document's integrity is maintained since the SciIE system uses the graph structure to create a terminology-based document structure. Therefore, long documents are also summarized. The proposed model is compared with baseline models and human evaluation. Human evaluation results show that the results of the proposed model are informative, fluent, and consistent with the ground-truth summary. The experimental results indicate that the proposed model outperforms baseline models with a 37.10 and 34.96 ROUGE-L score.

In the digital era in which over 4 billion people regularly access the internet, the conventional process of publishing scientific articles in academic journals following peer review is undergoing profound changes. Following physics and mathematics scholars who started to publish their work on the freely accessible arXiv server in the early 1990s, researchers of all disciplines increasingly publish scientific articles in the form of freely accessible and fully citeable preprints before or in parallel to conventional submission to academic journals for peer review. The full transition to open science, I argue in this study, requires to expand the education of students and young researchers to include scholarly communication in the digital era.

Cardiovascular diseases (CVDs) remain the leading cause of mortality. Traditional approaches to diagnosing and treating CVDs often involve interpretation, which can lead to errors. The emergence of Artificial Intelligence (AI) and Machine Learning aids the management of CVDs. AI examines amounts of data and identifies patterns offering solutions for disease detection, risk prediction, and patient care. The American Heart Association's 2023 Scientific Sessions (AHA23) showcased studies that highlight AIs potential to revolutionize cardiac healthcare. This article presents a review of these cutting-edge studies exploring how AI is applied in health, the outcomes of these applications, and their implications for clinical practice. The insights gained from this review will contribute to the discussion on AI's role in healthcare and its capacity to enhance outcomes.

The practice of teaching and scientific research on cadaveric material remains crucial for medical education, especially in surgical disciplines. However, in Italy, this practice has been neglected due to legislative insufficiency and financial constraints. Although innovative methods and tools like simulators and e-learning have been adopted, direct hands-on experience with human cadavers remains irreplaceable for medical and surgical education. The absence of clear legislation governing cadaveric dissection has limited availability for teaching and research, resulting in economic burdens for universities and individuals seeking proper surgical training. To address this issue, the Law No. 10/2020 and the recent implementing decree were introduced in Italy, providing detailed legislation on the donation of bodies for educational and research purposes. The law emphasizes the importance of respecting the donor's specific choices and aligns with constitutional principles promoting culture, research, and health protection. However, some critical issues related to consent procedures, duration of body availability, and preservation of anatomical parts remain. Additionally, the law's dissemination among the population needs improvement. Future optimization could include allowing donors to choose the timing of body donation and considering different timeframes for body availability. Furthermore, the implementation of consent procedures could be simplified to increase donations. The law should also address the need for appropriate reception centers and allocate resources for effective dissemination. Despite these challenges, Law No. 10/2020 represents a significant step forward in enhancing medical-surgical training, scientific research, and the overall quality of patient care in Italy.

Background: The bacterium Capnocytophaga spp. is a part of the oral microbiome of dogs, which has zoonotic potential. This study aimed to assess factors that influence the prevalence of Capnocytophaga cynodegmi and Capnocytophaga canimorsus in Wrocaw’s dog population. Methods: Molecular detection (PCR) involved 105 swabs, examining parameters such as oral cavity condition, underlying health issues, recent antibiotics, age, medications, material collection, and dog chews. Results: The study highlighted significant associations between the presence of Capnocytophaga cynodegmi and oral cavity condition, material collection method, and use of dog’s chews. Conclusions: Correlations obtained in this study between the oral health of Wroclaw's dog population and the presence of Capnocytophaga cynodegmi suggest its significance in the oral microbiome of dogs. Limitations, including the small sample size, highlight the need for more research to comprehensively understand additional factors that affect the prevalence of Capnocytophaga spp. in dogs

Recent years have seen dramatic growth in the number of scholarly scientific works dedicated to the topic of Artificial Intelligence (AI), banking, and finance. With the development of scientometric tools, it is now possible to map, visualize, analyze, and assess scientific activities in many fields of engineering and social sciences including Islamic banking and finance. Based on data retrieved from the Scopus database and using a qualitative method, this study investigates, evaluates, and identifies significant development, trends, and players in the application of AI in Islamic banking and finance using the Visualization Of Similarities Method (VOS) between objects in VOSviewer. From 2006 to 2022, 387 documents were retrieved from the Scopus database; Results revealed that the top five most active countries in terms of publications are Malaysia (117 documents), Indonesia (89 documents), the United Kingdom (36 documents), the USA (24 documents), and Saudi Arabia and Bahrain (24 documents each). The International Islamic University Malaysia and Universitas Indonesia came out on top of active institutions while the top funding source came from the Ministry of Higher Education, Malaysia. The comprehensive findings and analysis reported in this study serve as a roadmap for future academics to create theory and practice for applying AI in Islamic banking and finance.

Spiritual security should be a priority in our modern globalized society. Therefore, the study provides convincing evidence that it is important to develop a theoretical understanding of spiritual security. Several theoretical concerns regarding the establishment and maintenance of spiritual security are addressed in the article. He explores many ideas that are interrelated, including spiritual security, worldview, and spirituality. To ensure spiritual security, a practical analysis is carried out of the need to carry out various measures that strengthen the spiritual health of society.The article explains the methodology used in spiritual Security Investigations. According to the author, different levels of spiritual security can be analyzed using a structural-logical model and a dialectical method of cognition. Comparative analysis is also seen as a valuable tool. Spiritual intelligence is essential to overcome barriers, manage change, and ensure personal security and its impact on relationships. The process begins with introspection and evaluation, concluding with the ability to assess and understand the environment. By analyzing and understanding natural phenomena, it is possible to develop a sense of reality and a deeper appreciation of the nature of human existence. A person can feel spiritually safe if he adheres to his moral and spiritual beliefs and complies with the norms of society. It contains such things as worldview, social behavior, culture, research and social development. By expanding the spiritual point of view, the danger to the spiritual security of a person can be reduced.

The world is facing an energy crisis. Governments are seeking to provide universal energy access and guarantee energy security while trying to mitigate climate change. One possible solution is energy transitions towards low carbon energy systems. Among other things (physical infrastructure, public policy and regulatory enablers and knowledge and capacities) changes in the energy systems require a well informed and participative citizenship. Within this context the concept of energy literacy appears. Energy literacy is the understanding of how energy is generated, transported, stored, distributed and used, awareness about its environmental and social impacts and the knowledge to use it efficiently in the different sectors of the economy. This paper provides a systematic literature review in the Web of Science’s Core Collection. Most of the work done around energy literacy addresses its evaluation among different groups, particularly students at different levels, and the construction, application and evaluation of tools for improving energy literacy. Other frequently studied issues are the influence of energy literacy in decision making, its drivers and conceptual research about the topic. Energy enables citizens to effectively contribute to energy efficiency and sustainable development, nevertheless energy literacy is not strongly correlated to energy consumption habits.

A toy model for the distribution of the impact factor (IF) of a journal is proposed. The model demonstrates the presence of a heavy tail for the IF distribution, which occurs due to some random non-scientific circumstances. Therefore, the use of IF as an indicator of the quality of scientific papers seems to be inadequate.

Artificial intelligence and Quantum science supports path-breaking technologies for main technological change. The investigation goal of this study is to examine their scientific and technological development to explain drivers of these disruptive technologies. Analyses of data, based on publications and patents in quantum science and artificial intelligence, with a technometric model show that that quantum science and technology has a growth rate of 1.07, artificial Intelligence ha a rate of growth of 1.37, whereas the interaction of quantum science and artificial intelligence generates a convergent technological trajectory that has an accelerated rate of growth of 1.58, higher than trends of these technologies taken individually. These findings here clarify one of the fundamental determinants of the evolution of path-breaking technologies that can support decision making of policymakers, technology analysts and R&D managers to direct R&D investments towards fruitful inter-relationships between radical technologies that foster scientific and technological change in knowledge economies.

How do sensor research and technologies grow over time? This paper applies the network analysis with a new computational approach to map the structure and evolution of sensor research and technologies over a 30-year time frame (1990-2020).The goal of this study is to analyze the evolution of sensor research for forecasting emerging scientific and technological trajectories. Results show that the scientific interaction within ecosystem (represented with networks) of sensor generates a co-evolution of scientific fields supporting the accelerated growth of different technological tra-jectories, such as: wireless sensors, fiber optic and optical sensors, gas sensors and biosensors. These results suggest main theoretical implications that explain the evolution of sensor research with critical aspects of innovation management to support R&D investments towards new technological trajectories having a high potential of growth.

While there are software tools available for assisting to conduct the Life Cycle Assessment (LCA), such as OpenLCA, these tools lack integration with process design, simulation and optimization software. As LCA has critical role in sustainable product design, it is presented in this work a platform called EMSO_OLCA, which integrates the LCA provided by OpenLCA into the Environment for Modeling, Simulation, and Optimization (EMSO). EMSO_OLCA incorporates a database of environmental impact assessment methodologies from OpenLCA and aligns to the principles of LCA outlined in ISO 14040 and ISO 14044. Validation tests were conducted to compare the results obtained by the LCA of sugarcane ethanol using OpenLCA and EMSO_OLCA, revealing a high level of agreement. The average relative error was 0.045%, indicating a negligible discrepancy between the tools. Besides, it took only 0.3 seconds for calculation, which is desirable for using with process systems engineering tools. A second case study was applied to a steam and bioelectricity production from the combustion of sugarcane bagasse and straw in a combined heat and power system. The results show the integration of LCA with simulation and sensitivity analysis tools, thus contributing for supporting sustainable decision-making processes. EMSO_OLCA bridges the gap between LCA and process engineering, enabling a holistic approach to sustainability, design and implementation of environmentally friendly solutions.

Although composting has many advantages in the treatment of organic waste, there are still many problems and challenges associated with emissions, like NH3, VOCs, and H2S, as well as greenhouse gases such as CO2, CH4, and N2O. One promising approach to enhancing composting conditions is used of novel analytical methods bad on artificial intelligence. To predict and optimize the emissions (CO, CO2, H2S, NH3) during composting process kinetics thought mathematical models (MM) and machine learning (ML) models were utilized. Data about everyday emissions from laboratory composting with compost’s biochar with different incubation (50, 60, 70 °C) and biochar doses (0, 3, 6, 9, 12, 15% d.m.) were used for MM and ML models selections and training. MM has not been very effective in predicting emissions, (R2 0.1 - 0.9), while ML models such as acritical neural network (ANN, Bayesian Regularized Neural Network; R2 accuracy CO:0,71, CO2:0,81, NH3:0,95, H2S:0,72)) and decision tree (DT, RPART; R2 accuracy CO:0,693, CO2:0,80, NH3:0,93, H2S:0,65) have demonstrated satisfactory results. For the first time the ML models to predict CO and H2S during composting were demonstrated. Further research in a semi-scale and field study composting with biochar is needed to improve the accuracy of developments models.

As Christopher Alexander conceived and defined through his life’s work – The Nature of Order – wholeness is a recursive structure that recurs in space and matter and is reflected in human minds and cognition. Based on the definition of wholeness, a mathematical model of wholeness, together with its topological representation, has been developed, and it is able to address not only why a structure is beautiful, but also how much beauty the structure has. Given the circumstance, this paper is attempted to argue for the wholeness as the scientific foundation of sustainable urban design and planning, with the help of the mathematical model and topological representation. We start by introducing the wholeness as a mathematical structure of physical space that pervasively exists in our surroundings, along with two fundamental laws – scaling law and Tobler’s law – that underlie the 15 properties for characterizing and making living structures. We argue that urban design and planning can be considered to be wholeness-extending processes, guided by two design principles of differentiation and adaptation, to transform a space – in a piecemeal fashion – into a living or more living structure. We further discuss several other urban design theories and how they can be justified by and placed within the theory of wholeness. With the wholeness as the scientific foundation, urban design can turn into a rigorous science with creation of living structures as the primary aim.

In a dynamic production processes, mechanical degradation poses a significant challenge, impacting product quality and process efficiency. This paper explores a novel approach for monitoring degradation in the context of viscose fiber production, a highly dynamic manufacturing process. Using causal discovery techniques, our method allows domain experts to incorporate background knowledge into the creation of causal graphs. Further, it enhances the interpretability and increases the ability to identify potential problems via changes in causal relations over time. The case study employs a comprehensive analysis of the viscose fiber production process within a prominent textile industry, emphasizing the advantages of causal discovery for monitoring degradation. The results are compared with state-of-the-art methods, which are not considered to be interpretable, specifically LSTM-based autoencoders, showcasing the alignment and validation of our approach. This paper provides valuable information on degradation monitoring strategies, demonstrating the efficacy of causal discovery in dynamic manufacturing environments. The findings contribute to the evolving landscape of process optimization and quality control.

This study addresses the prediction of recurring failures in water supply networks, a complex and costly task, but essential for the effective maintenance of these vital infrastructures. Using historical failure data provided by Companhia de Água e Esgotos da Paraíba (CAGEPA), the research focuses on predicting the time until the next failure at specific points in the network. The authors divided the failures into two categories: Occurrences of New Faults (ONF) and Recurrences of Faults (RF). To make the predictions, they used predictive models based on Machine Learning, more specifically on MLP (Multi Layer Perceptron) neural networks. The study revealed that, by analyzing data from past failures and considering factors such as altitude, number of failures on the same street and days between failures, it is possible to achieve an accuracy greater than 80% in predicting failures within a 90-day interval. This demonstrates the feasibility of using fault history to predict future water supply outages with significant accuracy. These forecasts allow water utilities to plan and optimize their maintenance, minimizing inconvenience and losses. The article contributes to the field of water infrastructure management by suggesting that the data-driven approach can be applied in other cities or in networks of different types, such as energy or communication networks. The conclusions highlight the importance of data collection and analysis in preventing failures and optimizing water utilities’ resources.

Amylose content (AC) stands as a pivotal determinant of rice grain quality, primarily governed by the Waxy gene (Wx), with its allelic diversity significantly influencing AC variation. In the current culinary landscape, soft rice varieties, known for their low AC and superior palatability, are particularly sought after by consumers. Notably, many soft japonica rice varieties cultivated in southern China, including the Nangeng series, are characterized by the presence of the Wxmp allele, derived from the ancestral Wxmq allele. While both alleles are associated with reduced AC, there remains a paucity of detailed understanding regarding the interplay between specific functional single nucleotide polymorphisms (SNPs) within these alleles and the overarching rice grain quality. Employing site-directed mutagenesis, we engineered three distinct transgenic rice lines, each harboring either the Wxmp, Wxmq, or Wxb-5c alleles, against the background of the glutinous rice cultivar Nip(wx). This suite of transgenic rice showcased a gradation ingrain transparency inversely correlated to AC, delineating a sequence from Wxmq, signifying the lowest, through Wxmp, to Wxb-5c, indicating the highest. Consequently, this gradation in AC precipitated variations in other rice grain physicochemical attributes, such as the taste value of cooked rice, gel consistency (GC), and starch pasting properties. Furthermore, analyses of gene expression and enzyme activity revealed that the functional SNPs, Ex4-53G/A and Ex5-53T/C, lead to a decline in the GBSSI enzyme activity without affecting expression levels. These findings underscore the potential of harnessing these SNPs in breeding programs aimed at developing soft rice varieties endowed with enhanced culinary qualities.

Background: Over the past decades, efforts have been made to improve the nutritional well-being in people with cystic fibrosis (pwCF). Due to the correlation observed between nutritional indices and lung function, prevailing recommendations consistently advocate for BMI percentile goals at or above the 50th percentile in pwCF. Recent global trends show a notable increase in overweight and obese statuses among pwCF. This study aims to explore the nutritional status of Italian pwCF. Methods: Data from the Italian CF Patient’s Registry were analysed to assess the proportion of individuals categorized as underweight, target weight, overweight, and obese from 2010 to 2021. Patient-level comparison data from 2021 were also examined to identify potential determinants of overweight and obesity. Results: Analysis spanning 2010 to 2021 reveals a decrease of approximately 40% in underweight status among adults, while the proportion of malnourished patients 90, and lower prevalence of Pseudomonas aeruginosa colonization. Conclusions: Our study confirms the evolving nutritional status landscape among Italian adult pwCF, with a significant shift towards overweight and obesity over the past decade. These trends highlight the need for proactive measures within CF standards of care to adapt and address the changing needs of patients.

For the World Health Organization, and specifically for the International Coordination Committee, the need to bring forward discussions on non-clinical trials in human models, such as vaccine trials in pregnant women, with the aim of demonstrating immunity in newborns, has been addressed. This literature review seeks to investigate the relationship between mothers and newborns in terms of the transfer of IgG antibodies against SARS-CoV-2. Most of the literary evidence shows that the substantial transfer of transplacental and lactational antibodies to infants confers protection even when the baby is exposed to the disease. However, accurate and conclusive evidence on the safety and efficacy of COVID-19 vaccines during pregnancy will be a key factor in facilitating the decision-making process for pregnant women to ensure the safety of mother and baby.

The purpose of this study is to bring out a scientometric analysis of the advances of digital transformation in the global banking sector. For this, a background search of the term "Digital Transformation Banking " has been brought out from the Web of Science (Wos) Database, covering records published between 2002 and 2023. A set of 312 publications was identified, which mainly includes a set of 264 academic articles, 29 articles published without cataloging a specific volume of a journal, 9 articles under review, 5 editorial material documents, 4 conference articles, and 1 document is a book chapter. Nowadays the scientific production is low but showing growing development presenting 123 publications and 7,754 citations for the year 2022. Among the scientific production, 43 publications from the Republic of China (8.8%) and 35 publications from Ukraine (7.8%) stand out. ,2%). It is also worth mentioning that the most relevant authors on this topic are Ricardo Palomo, professor and dean of San Pablo University, and Robert J Kauffman, professor at Singapore Management University in terms of influence. Main institutions in terms of scientific production, mainly: the Massachusetts Institute of Technology (MIT) of the United States and the Russian Academy of Sciences of Russia.

Prospective end-users rated aptness, creativity, and innovativeness of biomimetic examples that featured different relationships to create combinations (e.g., used for) between nature and technology. Against common theorizing, similarity was not the most profound for creativity but rather appearance, being part_of, and property_of were. Creativity explained most of the variance in the level of innovation with aptness of the design in a strong supporting role. The focus of conceptualization shifted from ‘creation as new things coming from new ideas’ to ‘innovation as new ideas leading to new things.’ Results are interpreted in the Chinese context of utility. Both in education and industry, the use of 5*5 research grids with rating scales may work as a design method to develop and select functional variants during early design.

The present study aims to analyze scientific production about technological cooperation networks in biotechnology sector, based on bibliometrics network analysis. We used the Gephi software to identify groups of partnerships, proving that the cooperation relationship is a practice used, re-sulting technological development. Findings identify that in the path for new resources that com-plement skills and competences universities are an important player in this cooperative ecosystem, and The United States is a large hub, with an extensive network of global cooperation. A strong role of its researchers in the publication of scientific articles in cooperation is highlighted. This study contributes to the advancement of the discussion about cooperative networks, as well as to the development of policies aimed at the biotechnology sector advancements

There are uncertainties associated with every phase of the stock assessment process, ranging from the collection of data, assessment model choice, model assumptions and interpretation of risk to the implementation of management advice. The dynamics of fish populations are complex, and our incomplete understanding of those dynamics (and limited observations of important mechanisms) necessitate that models are simpler than nature. The aim is for the model to capture enough of the dynamics to accurately estimate trends and abundance and to provide advice to managers about sustainable harvests. The \textit{status quo} approach to assessment modelling has been to identify the `best' model, based on diagnostics and model selection criteria, and to generate advice from that model, mostly ignoring advice from other model configurations regardless of how closely they performed relative to the chosen model. We review the suitability of the ensemble modelling paradigm to more fully capture uncertainty in stock assessment model building and the provision of advice. We recommend further research to evaluate potential gains in modelling performance and advice from the use of ensemble modelling, while also suggesting revisions to the formal process for reviewing models and providing advice to management bodies.

Storing scientific data on the file system in a meaningful and transparent way is no trivial task. In particular when the data have to be accessed after their originator has left the lab the importance of a standardized file structure cannot be underestimated. It is desirable to have a structure that allows for the unique categorization of all kinds of data from experimental results to publications. It has to be accessible to a broad variety of workflows, e.g., via graphical user interface as well as via command line, in order to find widespread acceptance. Furthermore, the inclusion of already existing data has to be as simple as possible. We propose a three-level structure to organize and store scientific data that incorporates the full chain of scientific data management from data acquisition to analysis to publications. Metadata are saved in a standardized way and connect original data to analyses and publication as well as to their originators. A simple software tool to check a file structure for compliance with the proposed structure is presented.

Inadequately managed agricultural waste significantly impacts the environment, health, and economy. This form of pollution arises from the underutilization, poor awareness, and insufficient treatment of agricultural waste. Fruit and vegetable wastes are valuable sources of bioactive compounds. This study aims to revalorize discarded waste from red habanero chili peppers (Capsicum chinense) by extracting bioactive compounds through different extraction processes: maceration (ME), maceration assisted by ultrasound (US), Soxhlet extraction (SE), supercritical fluid extraction (SFE), and supercritical fluid extraction with a co-solvent (SFEC). Extraction processes have significant effects on extraction efficiency and phytochemical profile (capsaicinoids and carotenoids recovery). The results indicate that the highest efficiency process is obtained with SFEC, also a high phytochemicals recovery (14.9 mg of total capsaicinoids and total carotenoids 292.09 µg per gram of sample). Concerning to phytochemical profile in the extract, the maceration process gets the highest concentration of compound followed by US and SFEC. These data reveal that the use of SFE and SFEC extraction is recommended for extraction of phytochemicals with biologically activity from red habanero chili pepper waste for diverse industries application.

: The agriculture sector is one of the backbones of many countries’ economies and its processes have been changing in order to enable technological adoption to increase productivity, quality, and sustainable development. In this research, we present a theoretical reflection through a scientific mapping of the adoption of precision techniques and breakthrough technologies in agriculture, the so-called Precision Agriculture (PA) and Agriculture 4.0 (A4.0). To do this, we used 4,694 documents from the Web of Science database to perform a Bibliometric Performance and Network Analysis (BPNA) of the literature with the support of the PICOC protocol and the SciMAT software. Our findings present 22 strategic themes related to Digital Agriculture (DA) such as Internet of Things (IoT) and Climate-smart Agriculture (CSA) among others, and the thematic network structures of the motor themes and the thematic evolution structure of the field of the study over time. In addition, our results discuss the main challenges and opportunities of DA. Our findings have the potential to provide insights for practitioners and researchers in decision-making and pave the way for future works.

Despite the need for a sustainable energy resource, bioenergy gained its spotlight in the 2000s. Sugarcane is a significant crop in terms of sugar and energy capacity, and it can be an alternative energy source to mitigate the effects of climate change. Bioenergy production from sugarcane in Brazil is one of the most efficient. This production lends a centrality to biofuels' importance in confronting the effects of climate change. The present article reviews the Brazilian history of this crop as a biofuel source. We highlight the historical changes related to scientific, technological, industrial, and environmental advances since the beginning of the 20th century. We describe how creating governmental institutes and disseminating scientific knowledge strengthened public policies that led Brazil to occupy leadership positions in producing, distributing, and using bioenergy throughout the country. The compiled data shows the improvement and the new approaches needed in ethanol sugarcane. We developed a bibliometric analysis to evaluate Brazilian science's contribution to this process compared to other countries. Brazil's history of science and investments in sugarcane biofuel development for transportation may be divided into two phases: ethanol-only and flex-fuel cars. A third phase is starting, which is the ethanol-to-hydrogen era.

Diabetes mellitus, a metabolic disorder that is persistent in nature, is identified by an elevated concentration of glucose in the bloodstream. The disease has become a major public health problem, affecting millions of people globally, and is associated with significant morbidity and mortality. The increasing prevalence of diabetes and the lack of effective therapeutic interventions have led to the exploration of alternative and complementary forms of therapy, including ethnomedicine. Ethnomedicine is the study of traditional medical systems and the medicinal plants used by Indigenous communities. In other words, Ethnomedicine refers to the traditional medical practices and beliefs of a particular cultural or ethnic group. The most popular example of traditional medicine is the use of Aloe vera for the treatment of various diseases such as sunburn, cuts, burns, hypertension, diabetes, and jaundice for thousands of years [1]. In recent years, there has been increasing interest in the potential role of ethnomedicine in the management of diabetes, given its widespread use in many communities and its potential to offer cost-effective and culturally acceptable treatment options. It encompasses a range of traditional healing practices, including herbalism, acupuncture, and massage therapy. Despite the inconsistencies, there is growing evidence to suggest that certain ethnomedical practices may be effective in the management of diabetes [2,3]. For example, several studies have shown that certain herbal remedies, such as cinnamon, ginseng, and bitter melon, may have potential benefits in terms of improving glucose control and reducing the risk of complications associated with diabetes. Evidence-based ethnomedicine is an approach that applies scientific principles and methods to evaluate the efficacy and safety of traditional medical practices. This approach is crucial in the development of effective and safe ways to treat diabetes. To date, there have been numerous studies conducted to examine the efficacy and safety of various ethnomedical interventions for diabetes, including herbal remedies, dietary changes, and physical activity [4]. However, it is important to note that not all ethnomedical interventions for diabetes have been thoroughly evaluated, and many remain unproven. Furthermore, some interventions may be associated with significant risks, particularly in terms of drug interactions and adverse effects. As such, it is crucial that any ethnomedical interventions for diabetes be carefully evaluated using rigorous scientific methods and that patients be advised to consult with their healthcare provider before using any such interventions. It is important to note that the results of these studies have been mixed, with some showing promising results, while others have failed to demonstrate significant benefits. In this chapter, the evidence-based current state of ethnomedicine for diabetes was reviewed. We first provide an overview of diabetes and its pathophysiology, followed by a discussion of traditional medicinal practices used to treat the disease. We then present a systematic review of the scientific literature on the use of ethnomedicine for diabetes, focusing on herbal remedies and dietary interventions. Our review found that several medicinal plants offered promising results to treat all types of diabetes. For example, Gymnema sylvestre, a traditional Indian herb, has been shown to reduce blood glucose levels and improve insulin sensitivity [5]. Additionally, the use of bitter melon (Momordica charantia) has been shown to reduce fasting blood glucose levels and improve glucose tolerance in individuals with type 2 diabetes [6]. Another important aspect of ethnomedicine for diabetes is the use of dietary interventions [7]. Traditional diets, such as the Mediterranean diet, have been shown to have beneficial particularly in terms of improving glycaemic control, reducing the risk of cardiovascular disease, and insulin sensitivity [8]. Additionally, the use of low-carbohydrate diets, such as the ketogenic diet, has been shown to improve glycaemic control in individuals with type 2 diabetes [9]. Traditional medicine has a long history of treating the symptoms and managing the condition. However, the efficacy and safety of these traditional practices have not always been scientifically tested, and there is a lack of standardization and regulation in the production and use of traditional remedies for diabetes. This creates a challenge for healthcare providers and patients, who need to ensure that the treatments they use are safe and effective. Additionally, there is a need for further research to understand the mechanisms by which traditional remedies may be effective in managing diabetes and to determine the optimal dosage and administration methods [9]. Finally, it is also important to understand that the use of traditional remedies may interact with conventional medications, leading to adverse effects; for example, the use of Chinese traditional medicine, known as “herb ginseng,” for the treatment of various health conditions, including diabetes sometimes cause the side effect such as dizziness, confusion, and fainting while interacting with the anti-diabetic medications [10]. Therefore, it is important to approach the use of ethnomedicine for diabetes with caution and under the guidance of a qualified healthcare professional. In conclusion, evidence-based ethnomedicine offers a promising approach to the treatment of diabetes. While further research is needed to fully understand the mechanisms and safety of these interventions, the results to date suggest that traditional remedies and dietary interventions have the potential to be effective in the management of this disease. However, it is important to approach the use of ethnomedicine for diabetes with caution and under the guidance of a qualified healthcare professional and to continue to conduct rigorous scientific research to fully understand the benefits and risks associated with these interventions.

Science evolves over a gentle arc spanning centuries, with scientists building upon and extending the hypotheses and discoveries of their forebears when nurturing their own work from ideation to crystallization and finally implementation. However, evidence suggests several limitations of our modern academic pursuits including major inertia and epistemological biases to implement even major advancements. For instance, the transformative uncertainty principles of quantum mechanics are yet to be satisfactorily integrated in modern analyses and publications, even almost a century after Heisenberg received the Nobel prize for these. Another example is ever expanding reliance on mathematics to validate the hypotheses of Physics, and undermine the opinions to the contrary. In addition, modern science limits itself to the era post fifteenth century and hastily rejects premodern achievements despite glaring examples. This reluctance and inertia to capitalize on existing knowledge is a challenge that imperils our intellectual pursuits. A salient facet of science is "the willingness to admit ignorance". Only on this foundational principle can science meaningfully evolve. It is time we take a step back to evaluate widely accepted and foundational premises of modern science and institute structured processes to implement the treasure trove of knowledge amassed by our predecessors. This essay highlights some of the opportunities that can and should be availed capitalizing upon the recent developments of computational and analytical capabilities along with artificial intelligence.

In this article we investigate the determinants of the European “Most Cited Publications”. We use data from the European Innovation Scoreboard-EIS of the European Commission for the period 2010-2019. Data are analyzed with Panel Data with Fixed Effects, Panel Data with Random Effects, WLS, and Pooled OLS. Results show that the level of “Most Cited Publications” is positively associated, among others, to “Innovation Index” and “Enterprise Birth” and negatively associated, among others, to “Government Procurement of Advanced Technology Products” and “Human Resources”. Furthermore, we perform a cluster analysis with the k-Means algorithm either with the Silhouette Coefficient and the Elbow Method. We find that the Elbow Method shows better results than the Silhouette Coefficient with a number of clusters equal to 3. In adjunct we perform a network analysis with the Manhattan distance, and we find the presence of 4 complex and 2 simplified network structures. Finally, we present a confrontation among 10 machine learning algorithms to predict the level of “Most Cited Publication” either with Original Data-OD either with Augmented Data-AD. Results show that the best machine learning algorithm to predict the level of “Most Cited Publication” with Original Data-OD is SGD, while Linear Regression is the best machine learning algorithm for the prediction of “Most Cited Publications” with Augmented Data-AD.

From professors overwhelmed by anxiety-driven e-mails from students, through faculty and administrative staff wasting valued time on e-mail minutia, misuse of electronic mail in the academy has become ubiquitous. After a brief overview of the unique features of e-mail communication, this study provides insight and guidelines to plan new educational activities on healthy and productive utilization of e-mail in the academy of the digital era. The overall aim is to prioritize scholarly deep work by focusing on teaching and research work, freeing working time wasted on unproductive use of e-mail.

This paper describes the state of the art and future opportunities for process design and sustainable development. In the Introduction the main global megatrends and European Union's response to two of them, the European Green Deal, are presented. The organization of professionals in the field, their conferences and publications support the two topics. A brief analysis of the published documents in the two most popular databases shows that the environmental dimension predominates, followed by an economic one, while the social pillar of sustainable development is undervalued. The main design tools for sustainability are described. As an important practical case, the European chemical and process industries are analyzed and their achievements in sustainable development are highlighted; in particular, their strategies are presented in more detail. The conclusions cover the most urgent future development areas of the process industries, carbon capture with utilization or storage, process analysis, simulation, synthesis and optimization tools; zero waste, circular economy and resource efficiency already play an important role. However, more profound changes are needed in the coming decades, including a shift away from growth with changes in habits, lifestyles and business models. Lifelong education for sustainable development will play a very important role in the growth of democracy and happiness instead of consumerism and neoliberalism.

Biological nanoparticles (NPs), such as extracellular vesicles (EVs), exosome-mimetic nanovesicles (EMNVs) and nanoghosts (NGs), are perspective non-viral delivery vehicles for all types of therapeutic cargo. Biological NPs are renowned for their exceptional biocompatibility and safety, alongside their ease of functionalization, but a significant challenge arises when attempting to load therapeutic payloads, such as nucleic acids (NAs). One effective strategy involves fusing biological NPs with liposomes loaded with NAs, resulting in hybrid carriers that offer the benefits of both biological NPs and the capacity for high cargo loads. Despite their unique parameters, one of the major issues of virtually any nanoformulation is the ability to escape degradation in the compartment of endosomes and lysosomes which determines the overall efficiency of nanotherapeutics. In this study, we fabricated all major types of biological and hybrid NPs and studied their response to acidic environment observed in endolysosomal compartment. In this study, we show that EMNVs display increased protonation and swelling relative to EVs and NGs in an acidic environment. Furthermore, the hybrid NPs exhibit an even greater response compared to EMNVs. Short-term incubation of EMNVs in acidic pH corresponding to late endosomes and lysosomes again induces protonation and swelling, whereas hybrid NPs are ruptured, resulting in the decline of their quantities. Our findings demonstrate that in an acidic environment, there is enhanced rupture and release of vesicular cargo observed in hybrid EMNVs that are fused with liposomes compared to EMNVs alone. This was confirmed through PAGE electrophoresis analysis of mCherry protein loaded into nanoparticles. In vitro analysis of NPs colocalization with lysosomes in HepG2 cells demonstrated that EMNVs mostly avoid endolysosomal compartment whereas hybrid NPs escape it over time. To conclude, (1) hybrid biological NPs fused with liposomes appear more efficient in the endolysosomal escape via the mechanism of proton sponge associated with scavenging of protons by NPs, influx of counterions and water, and rupture of endo/lysosomes, but (2) EMNVs are much more efficient than hybrid NPs in actually avoiding endolysosomal compartment in human cells. These results reveal biochemical differences across four major types of biological and hybrid NPs, and indicate that EMNVs are more efficient in escaping or avoiding endolysosomal compartment.

The growing usage of Generative AI tools in scientific writing requires a critical examination of their benefits and challenges. This literature review is aimed at comprehensively analyzing current empirical research articles focused on the application of Generative AI in scientific writing. The Google Scholar database was used to search for the literature. The following keywords were used: "Generative AI" and "academic writing", "LLM" (Large Language Models) and "academic writing", "Generative AI" and "Scientific writing", and "ChatGPT" and "Scientific Writing". The search was restricted to articles published between January 1, 2023, and April 30, 2024. 15 articles were selected as appropriate for the study and analyzed. It was found that, thus far, ChatGPT is the most exploited tool in the studies. AI tools such as Bard (Gemini), Bing, Claude2, and Elicit were also tested. The benefits of Generative AI usage in scientific writing were found to be omnipresent. It can aid in the generation of structured abstracts, titles, introductions, literature reviews, and conclusions of a scientific article. Generative AI also makes writing more efficient and time-saving. Its capabilities in improving language and proofreading are well-established. However, the generation of inaccurate content and references by current commercially available LLMs poses a serious problem. The lack of critical thinking and tendency to produce non-original content are significant drawbacks. Generative AI should be employed with human oversight, serving as an assistant rather than a replacement. Transparency in AI usage in scientific writing is essential, along with the necessity for proper legal regulation.

Acne vulgaris is a prevalent dermatological disorder that impacts the quality of life for millions of people around the world. The multifactorial nature of this disorder requires innovative and effective treatment strategies. Over time, there has been a growing interest regarding the use of natural topical therapies, with cannabinoids emerging as a promising group of compounds for investiga-tion. In the context of acne treatment, cannabinoids are of particular interest due to their anti-acne properties, namely, lipostatic, anti-inflammatory, antiproliferative, and antimicrobial activities. Among these bioactive compounds, cannabidiol stands out as a notable derivative, exhibiting a promising spectrum of therapeutic actions. Pre-clinical and clinical studies have proven its ability to modulate sebum production, reduce inflammation, and inhibit bacterial proliferation - all of which are critical components in the pathogenesis of this dermatosis. This review provides a comprehen-sive overview of cannabinoids' potential as a novel and holistic approach to acne vulgaris treatment and summarizes recent developments in this area.

The typically qualitative treatment of evidence underlying different causal hypotheses that attempt to explain singular historic events is criticized. Instead of using ad hoc qualitative arguments, it is here advocated to use Bayes theorem to assess how well evidence either support or weaken a specific causal hypothesis. It is argued that such a practice will enable scientists who study singular historic events to discuss, compare and aggregate different beliefs in a meaningful way.

The current paper explores the potential interlink between names of individuals in a society and its collective social consciousness, particularly with reference to the pervasive occurrence of the ‘mathematical names’ in the current Hindu society in the Indian subcontinent and beyond. Initially, an attempt is made to put things into mathematical perspective by drawing a quick sketch of some of the stellar achievements of the Indian mathematicians. Under the six broad categories of geometry, trigonometry, numeration, arithmetic, algebra, and mathematics in the Vedic tradition, a concise simple description of these subdivisions is presented, underlining the names of the concepts and terms, sometimes by producing the textual references. Then, upon identification of such mathematical terms, an attempt is made to juxtapose these with the names current in the Indian Hindu society. By employing an extensive dataset of university student names in India and the directories of Facebook and LinkedIn, we produce both qualitative and quantitative evidence of the presence of such names in the Indian subcontinent. Evidently, these names reflect the impressions of the tremendously rich mathematical heritage left by the Hindu stalwart mathematicians. This hypothesis has also been examined by taking surveys of people bearing these mathematical names, as well as by documenting the ‘conscious procedures’ that go behind the naming of a Hindu Indian child. In trying to investigate if such a phenomenon is unique to the Indian tradition, a stark contrast with the ‘names in mathematics’ as prevalent in the European mathematical traditions is presented, as cultural roots of mathematics are explored. Further, we ascribe the presence of these names as the extant remains of the colossal impact of multifarious mathematical traditions existing in India. Interestingly, the present research also brings to the fore, certain unseen facets of the Indian Hindu society as regards the education of mathematics to women – through an indirect exploration of their names. We also show that the pervasive occurrence of these names is not merely the result of semantic chance events, but denotes the richness of the Indian mathematical legacy. Next, we also present cross-cultural comparisons to show the uniqueness of Indian mathematical and scientific traditions that led to the pervasiveness of ‘mathematical names’ in India. Finally, an attempt is made to clarify some subtle points on the associations between mathematics and religion in India and other cultures of the world. It is sincerely hoped that the present study may shed light on the cultural roots of mathematics and may furnish a new dimension in the study of mathematics, culture and civilizations across the world.

Live streaming conferences increase the participation of a diverse audience, help defray travel costs and overcome problems related to travel restrictions. In this article, we lay out tips for implementing live-streaming in scientific meetings. We also cover legal, ethical, and technical aspects implicated with live-streaming scientific talks. To write this article, we leveraged knowledge from our experience in organizing the symposium “Deciphering the Denisovans,” presented at the 88th Annual Meeting of the American Association of Physical Anthropology (AAPA) in Cleveland, OH, in 2019, as well as literature on the topic.

Educating for Sustainability involves promoting sustainable competences in students. Not in vain, wider societal changes that ensure a balance between economic growth, respect for the environment and social justice must start with individual actions, implying knowledge, capacity and willingness to act. However, and although there is wide consensus that education should promote the development of competences for life, putting this theoretical tenet into may entail more problems. Competence is most often expressed in general terms without a specific definition of the intervening elements (knowledge, skills, values, attitudes), which may collide with the necessity of teachers – as learning planners - concrete entities on which to base their process of design. So that, in this work we propose a series of indicators that serve to characterize the four dimensions of scientific competence – contents of science, contents about science, value of science and utility of science-. Although they are primarily intended to be used to filter multimedia resources in an educational platform, this proposal of indicators can be extrapolated to the management and selection of a variety of resources and activities, and for sharing the objectives and evidences for the acquisition of competencies.

The most cited evidence for (nonbaryonic) dark matter has been an apparent lack of visible mass to gravitationally support the observed orbital velocity of matters in rotating disk galaxies. Yet measurement of the mass of celestial objects cannot be straightforward, requiring theories derived from the known physical laws along with some empirically established semi-quantitative relationship. The most reliable means for determining the mass distribution in rotating disk galaxies is to solve a force balance equation according to Newton’s laws from measured rotation curves, similar to calculating the Sun’s mass from the Earth’s orbital velocity. Another common method to estimate galactic mass distribution is to convert measured brightness from surface photometry based on empirically established mass-to-light ratio. For convenience, most astronomers commonly assumed a constant mass-to-light ratio for estimation of the so-called “luminous” or “visible” mass, which should not be expected accurate. The mass determined from rotation curve typically exhibit an exponential-like decline with galactrocentric distance, qualitatively consistent with observed surface brightness. This fact scientifically suggests variable mass-to-light ratio of baryonic matter in galaxies without the need for dark matter.

The authors introduce the GRASS GIS add-on module g.citation as an initial implementation of a fine-grained software citation concept. The module extends the existing citation capabilities of GRASS GIS, which until now only provide for automated citation of the software project as a whole, authored by the GRASS Development Team, without reference to individual persons. The functionalities of the new module enable individual code citation for each of the over 500 implemented functionalities, including add-on modules. Three different classes of citation output are provided in a variety human- and machine-readable formats. The implications of this reference implementation of scientific software citation for both for the GRASS GIS project and the OSGeo foundation are outlined.

Islam is not a mono-dimensional religion, therefore studying Islam with all its aspects is not enough with the scientific method, ie philosophical, human, historical, sociological methods. Likewise, understanding Islam with all its aspects can not be-be doctrinaire. A scientific and doctrinal approach should be used together (Scientific Cum Doctrine).

The emergence of COVID-19 has prompted an unprecedented scientic publication with the aim of better understanding this new disease. This study assessed the scientic impact and disciplinary priorities of the published papers on the pandemic by comparing epidemiological (EP) and social sciences (SS) research interests. Papers were identified via keywords searching using Google Scholar and Scopus databases. From an initial 1720 papers, we identified 597 relevant articles, of which 347 were for EP researches and 250 for SS studies. We extracted information, such as authors' countries, and research thematic related to EP and SS. The results revealed that most papers were authored by Asian (37.5%), European (30.5%) and American (19.6%) scientists. Only 10.1% and 2.3% of authors were aliated with African and Oceanian institutions, respectively, indicating that the regions most affected by the pandemic mainly contributed to the scientic publications. In total, 26 research themes were recorded from both EP and SS studies. There was a high signicant dierence among themes in both research fields (Chi-square = 1204.3, df = 1, p-value < 0.001). EP papers mostly dealt with clinical trials (54.5%) and diagnosis (53.3%). These papers assessed the incidence and epidemiological characteristics of the disease (incubation period, symptomatic period, recovering or death), testing tests developed, drugs and vaccines used. SS papers were mainly concerned with the sociocultural analyses (78%) and economic impact (55.6%) of the pandemic. They mainly focused on behavioral changes induced by the pandemic and strategies developed to mitigate its impacts. This study highlights the difference between regions and gaps between scientific disciplines concerning the proposed responses to control the pandemic. It is important to promote collaborative and interdisciplinary studies for health emergencies.

Seeds from several Ribes taxa were surveyed for phenolic compounds and in vitro antiproliferative activity against HT-29 colorectal cancer cells. Total phenolic compounds were analysed through the Folin-Ciocalteu procedure, while phenolic profiles were analysed by LC coupled to a single mass spectrometer Orbitrap using an electrospray interface (ESI). Antitumor effects were established using the MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay. Total phenolics ranged from 11.4 in R. alpinum to 94.8 mg of caffeic acid equivalents (CAE)/g in R. nigrum 'Koksa'. Concerning phenolic compounds, four were hydroxylated benzoic acids, four cinnamic acid derivatives, eight flavonoids, and nine flavonoid glycosides. The growth inhibition against HT-29 cancer cells was exercised much better by R. nigrum 'Koksa' and Ribes 'Erkeeni' (GI50 37 and 42 µg/ml). All Ribes extracts, except R. nigrum 'Hara katarlik', showed higher activity than that of R. rubrum (GI50 at 72 h: 99 µg/ml). Interestingly, the highly bioactive extract from Ribes 'Erkeeni' contains all detected phenolics, while R. nigrum 'Koksa' lacks only populnin. Therefore, the high bioactivity found for such extracts could be due to a synergy due to all detected compounds. This work constitutes a comprehensive action for expanding knowledge on the phenolic profiles and antitumor activity of GLA-rich Ribes seeds.

Many clinical trials end uninformatively. Informativeness, in the context of clinical trials, defines whether a study’s results definitively answer its research questions with meaningful next steps. One subset of these trials are those focused on global health set in low-resource settings. Global health clinical trials benefitting people in low-resource settings are funded primarily by a limited number of large foundations, pharmaceutical firms (“industry”), and national governments. While clinical trial protocols are required to go through reviews in regulatory and ethical domains, outside of industry-funded trials, funders rarely require focused scientific design reviews. There are no documented standards and processes, or even best practices, for funders to perform scientific reviews after the funding commitment. Considering the investment in and standardization of ethical and regulatory reviews, and the prevalence of studies ending without clarity or never finishing, it may be that scientific reviews of trial designs with a focus on informativeness offer the best chance for improved outcomes and return on investments in clinical trials. A maturity model is a helpful tool for knowledge transfer to help grow capabilities in a new area, or for those looking to perform a self-assessment in an existing area. Such a model is offered for scientific design reviews of clinical trial protocols: a valuable and often-neglected governance step for funders or sponsors, among others. This maturity model includes 11 process areas and 5 maturity levels. Each of the 55 process area levels is populated with descriptions on a continuum toward an optimal state to improve trial protocols in the area of risk of failure. This tool allows for prescriptive guidance on next investments to improve attributes of post-funding reviews of trials, with a focus on informativeness.

Background: Articles published in scholarly journals form part of the scientific evidence base. It is the responsibility of the scientific community to maintain its integrity. In 2011 the BMJ commissioned a feature article to draw attention to an article that had appeared in another journal- The Lancet 13 years previously. The Lancet had already retracted the article. These actions exemplify the best traditions of scientific record-keeping. Objective: This submission examines whether the main claims summary made in the BMJ were factual. Method: We examine what was published in the Lancet against what was published in the BMJ and verify against the findings in the GMC hearings transcripts and verdict of the UK High Court. Results: The 6 points highlighted in BMJ had errors and need to be corrected. Conclusions: There are significant differences between what was reported in the Lancet paper and what was alleged to be there by the BMJ. This article aims only to point to errors in the BMJ article, to set the record straight. It does not show there was a causal association between MMR vaccination and autism.

Reliable quantification of pulmonary arterial pressure is essential in the diagnostic and prognostic assessment of a range of cardiovascular pathologies including rheumatic heart disease, yet an accurate and routinely available method for its quantification remains elusive. This work proposes an approach to infer pulmonary arterial pressure based on scientific machine learning techniques and non-invasive, clinically available measurements. A 0-D multicompartment model of the cardiovascular system was optimized using several optimization algorithms, subject to forward-mode automatic differentiation. Measurement data were synthesized from known parameters to represent the healthy, mitral regurgitant, aortic stenosed and combined valvular disease situations with and without pulmonary hypertension. Eleven model parameters were selected for optimization based on 95 % explained variation in mean pulmonary arterial pressure. A hybrid Adam and limited-memory Broyden-Fletcher-Goldfarb-Shanno optimizer yielded the best results with input data including valvular flow rates, heart chamber volume changes and systematic arterial pressure. Mean absolute percentage errors ranged from 1.8 % to 3.78 % over the simulated test cases. The model was able to capture pressure dynamics under hypertensive conditions with pulmonary arterial systole, diastole, and mean pressure average percentage errors of 1.12 %, 2.49 % and 2.14 %, respectively. The relatively low errors highlight the potential of the proposed model to recover pulmonary pressures for diseased heart valve and pulmonary hypertensive conditions.

There is an increasing interest in revisiting plants for drug discovery proving scientifically their role as remedies. Pistacia lentiscus (PL) is a wild-growing shrub rich in terpenoids, which are pharmacological appealing. The more recurrent components in the oil are represented by α-pinene, terpinene, caryophyllene, limonene, and myrcene. High concentration of polyphenols enriches the extracts. PL-extracts showed in vitro and in animal model strong anti-inflammatory and anti-oxidative activities. The anti-inflammatory activity mainly occurs due to inhibition of NF-kB pathway or directly toward the proinflammatory cytokines, or arachidonic acid cascade against COX-2 and LOX. The antimicrobial activity of PL essential oil and extracts includes among others Staphylococcus aureus, Escherichia coli, periodontal bacteria and Candida sp.. In conclusion, the biological properties, and particularly the anti-inflammatory and anti-microbial capacity, propose PL as a new safe pharmaceutical agent.