This paper intends to discuss SSLs, how they work, their advantages and drawbacks. It will end with the author’s thoughts on the efficacy of the system and whether it is a viable solution for the majority of network security problems or if those drawbacks prevent that.

Deadlock is a real problem that can cause expensive, time-dependent hang-ups or failures in distributed computing systems. Some studies have been conducted with deadlock detection and resolution in generalized request computing models, most of these studies are based on the diffusing computation scheme, where forward and backward propagated probe and reply messages respectively are diffused between dependent processes. The replies carry the dependency information between processes for the initiator. Using this dependency information initiator can detect and resolve the deadlock cycle. It has been proven in the literature that a deadlock cycle length distribution is skewed with a large majority of cycles (90%) having length two. Based on this fact an improved algorithm is proposed for handling deadlock detection in distributed computing systems under the distributed request model where each process has several requests at a time. The improved algorithm depends mainly on message propagation and timeout policy. Probe and reply messages are propagated between the initiator and its successors only to detect deadlock cycles between them. Global timeout policy is used to detect potential deadlock cycles with large length distribution. The proposed algorithm can handle concurrent executions. Simulation experiments are performed to see the effectiveness of the improved algorithm. It is found that the improved algorithm compares favorably with other existing algorithms and it shows better results for several performance metrics especially in reducing deadlock latency and execution time.

Currently, there are several challenges that Cloud-based health-care Systems, around the world, are facing. The most important issue is to ensure security and privacy or in other words to ensure the confidentiality, integrity and availability of the data. Although the main provisions for data security and privacy were present in the former legal framework for the protection of personal data, the General Data Protection Regulation (GDPR) introduces new concepts and new requirements. In this paper, we present the main changes and the key challenges of the General Data Protection Regulation, and also at the same time we present how the Cloud-based Security Policy methodology proposed in [1] could be modified in order to be compliant with the GDPR and how Cloud environments can assist developers to build secure and GDPR compliant Cloud-based health Systems. The major concept of this paper is, primarily, to facilitate Cloud Providers in comprehending the framework of the new General Data Protection Regulation and secondly, to identify security measures and security policy rules for the protection of sensitive data in a Cloud-based Health System, following our risk-based Security Policy Methodology that assesses the associated security risks and takes into account different requirements from patients, hospitals, and various other professional and organizational actors.

: In today’s rapidly expanding era of the Internet of Things (IoT) and the Industrial Internet of Things (IIoT), the emphasis on robust data security and insightful data interpreta- tion is more pronounced than ever. This research introduces a comprehensive approach to both data protection and predictive analytics, leveraging the diverse dataset TON IoT.csv, sourced from a myriad of IoT and IIoT environments. For data security, a dual-encryption technique incorporating both AES and RSA algorithms is established. Its efficacy is evidenced by a perfect match between the original and decrypted datasets, underscoring the integrity of our encryption process. Concurrently, the study ventures into predictive modeling using a modified Snake Optimization Algorithm (SOA) to streamline hyperparameter selection. This subsequently aids in the development and fine-tuning of an LSTM network, which exhibits remarkable predictive accuracy. Additionally, the paper provides an in-depth examination of various encryption methodologies like elliptic curve cryptography (ECC), Lightweight Cryptography for Cloud computing, and homomorphic encryption, while also emphasizing the nuances of encryption in cloud setups, particularly contrasting server-side with client-side encryption and efficient key management. The insights presented serve as a cornerstone for ensuing research, promising a bright future for advancements in IoT and IIoT data protection and analysis

To achieve an acceptable level of security on the web, the Completely Automatic Public Turing test to tell Computer and Human Apart (CAPTCHA) was introduced as a tool to prevent bots from doing destructive actions such as downloading or signing up. Mobile devices have small screens, and therefore, using the common CAPTCHA methods (e.g. text CAPTCHAs) in these devices raises usability issues. To introduce a reliable, secure, and usable CAPTCHA that is suitable for mobile devices, this paper introduces a hand gesture recognition CAPTCHA based on applying Genetic Algorithm (GA) principles on Multi-Layer Perceptron (MLP). The proposed method improves the performance of MLP-based hand gesture recognition. It has been trained and evaluated on 2201 videos of the IPN Hand dataset, and MSE and RMSE benchmarks report the index values of 0.0018 and 0.0424, respectively. Comparison with the related works shows a minimum of 1.79% fewer errors, and experiments produced a sensitivity of 93.42% and accuracy of 92.27% – 10.25% and 6.65% improvement compared to the MLP implementation.

Image encryption is increasingly becoming an important area of research in information security and network communications, as digital images are widely used in various applications and are vulnerable to various types of attacks. In this research work, a color image cryptosystem that is based on a 3-layer permutation-substitution network (PSN) is proposed. For every layer, an encryption key and an S-box are generated and utilized. Those are based on a four-dimensional (4D) dynamical Chen system of a fractional-order, the Mersenne Twister, OpenSLL, Rule 30 Cellular Automata and Intel’s MKL. The sequential application of Shannon’s ideas of diffusion and confusion for 3 times guarantees a total distortion of any input plain image, resulting in a totally encrypted one. Apart from the excellent and comparable performance to counterpart algorithms from the literature, showcasing resistance to visual, statistical, entropy, differential, known plaintext and brute-force attacks, the proposed image cryptosystem provides an exceptionally superior performance in 2 aspects: a vast key space of 2^1658 and an average encryption rate of 3.34 Mbps. Furthermore, the proposed image cryptosystem is shown to successfully pass all the tests of the NIST SP 800 suite.

We propose an innovative approach called SMPTC3, designed specifically to enhance security and privacy in cross-chain transaction verification. This approach addresses multi-chain, multi-participant information exchange and large-scale cross-chain transfers, resisting various types of malicious attacks. We leverage the verifiability of cross-chain transactions based on smart contracts and innovatively transform transaction information into confidential sets, organizing them into quadratic secret polynomials. By utilizing secret sharing and random distribution techniques, we construct a secure multiparty computation method, tailored for cross-chain transactions. To enhance the efficiency of cross-chain transactions, we introduce cross-chain batch processing technology, grouping inter-chain transactions into cross-chain transaction sets. Unlike traditional distributed notary technologies, SMPTC3 designates honest participants as a cross-chain notary group, reducing the time required for redundant signature confirmations and significantly lowering the possibility of malicious notaries. Theoretical analysis and empirical experiments demonstrate that SMPTC3 is highly efficient in addressing cross-chain transaction security issues.

Drugs-drugs interactions(DDI) are entities composed of different chemical substructures (functional groups). In existing methods that predict drug–drug interactions based on the usage of substructures, each node is considered the center of a substructure, and adjacent nodes eventually become centers of similar substructures, resulting in redundancy. Furthermore, the significant differ- ences in structure and properties among compounds can lead to unrelated pairings, making it difficult to integrate information. This heterogeneity negatively affects the prediction results. To address these issues, we propose a drug–drug interaction prediction method based on substructure signature learning (DDI-SSL). This method extracts useful information from local subgraphs surrounding drugs and effectively utilizes substructures to assist in predicting drug side effects. Additionally, a deep clustering algorithm is used to aggregate similar substructures, allowing any individual subgraph to be reconstructed using this set of global signatures. Furthermore, we developed a layer-independent collaborative attention mechanism to model the mutual influence between drugs, generating signal strength scores for each class of drugs to mitigate noise caused by heterogeneity. Finally, we evaluated DDI-SSL on a comprehensive dataset and demonstrated improved performance in DDI prediction compared to state-of-the-art methods.

This paper presents a piezoresistive pressure sensor with a shield layer for improved stability. Compared with the conventional piezoresistive pressure sensors, p-type piezoresistors are covered by an n-type shield layer, which is formed by ion implantation. The proposed pressure sensors have been successfully fabricated by bulk micromachining techniques. The impact of electrical field on piezoresistors is studied by simulation. The temperature drift of the pressure sensor has been investigated by both simulation and experimental measurement. Characteristics of developed pressure sensors are tested from -40 C to 125 C. A sensitivity of 0.022 mV/V/KPa and a maximum non-linearity of 0.085% FS are measured for the fabricated sensor in a pressure range of 1 MPa. The temperature coefficients of resistance of shielded piezoresistors are found to be smaller than those of un-shielded ones. It is demonstrated that the shield layer is able to reduce the drift caused by electrical field and ambient temperature variation.

In this paper, we present a novel approach for text independent phone-to-audio alignment based on phoneme recognition, representation learning and knowledge transfer. Our method leverages a self-supervised model (wav2vec2) fine-tuned for phoneme recognition using a Connectionist Temporal Classification (CTC) loss, a dimension reduction model and a frame-level phoneme classifier trained thanks to forced-alignment labels (using Montreal Forced Aligner) to produce multi-lingual phonetic representations, thus requiring minimal additional training. We evaluate our model using synthetic native data from the TIMIT dataset and the SCRIBE dataset for American and British English, respectively. Our proposed model outperforms the state-of-the-art (charsiu) in statistical metrics and has applications in language learning and speech processing systems. We leave experiments on other languages for future work but the design of the system makes it easily adaptable to other languages.

As technology advances, people are increasingly adopting IoT (Internet of Things) devices in smart cities. These devices are equipped with sensors that are connected everywhere, from energy infrastructure and transportation to telecommunications, health and human services, waste management, public safety, and more. People want to access sensor data anytime and everywhere to make better decisions and improve their lives. To achieve this, a sensor integration model has been developed where multiple sensors are integrated under one gateway to manage and share sensor data. However, effective sharing of sensor data requires data security, privacy, confidentiality, fairness, effective architectural design, and low communication and computation costs. These issues need to be addressed in the sensor integration model in smart cities. Existing storage models face challenges in managing sensor data effectively. To overcome these issues and hurdles, a data storage framework leveraging blockchain technology has been proposed within the sensor integration model. This framework ensures data security, privacy, confidentiality, and a fair and transparent financial model, all while minimizing communication and computation costs.

Alveolar bone atrophy after tooth extraction presents significant difficulties when planning delayed-immediate implant treatment to replace a lost tooth. Socket augmentation is an effective therapy that limits the post extraction volumetric changes and facilitates implant placement whilst reducing the need for staged grafting. However, socket augmentation and osteoconductive graft conversion is a slow process that could take 4-6 months. PRF and its variants have significant bio-enhancement effect on wound healing and regeneration through release of platelet drived growth factors, bioactive substances, cytokines. Leukocytes in PRF also play a significant role in enhancing tissue regeneration as part of osteo-immune response. Use of PRF during socket augmentation is highly effective in enhancing extraction site healing and graft integration by angiogenesis, cell proliferation, recruitment, and differentiation through release of growth factors and bioactive substances mediated by platelets and leukocytes. PRF with SA is recommended as an adjunct to SA as a sole biomaterial or in combination with xenograft or allograft bone substitutes to enhance tissue regeneration and to reduce risk of infection, osteitis and postoperative pain in extraction sockets

With increased vulnerabilities and vast technology landscapes, it is extremely critical to build systems which are highly resistant to cyber-attacks, to break into systems to exploit. It is almost impossible to build 100% secure authentication & authorization mechanisms merely through standard password / PIN (With all combinations of special characters, numbers & upper/lower case alphabets and by using any of the Graphical password mechanisms). The immense computing capacity and several hacking methods used, make almost every authentication method susceptible to cyber-attacks in one or the other way. Only proven / known system which is not vulnerable in spite of highly sophisticated computing power is, human brain. In this paper, we present a new method of authentication using a combination of computer’s computing ability in combination with human intelligence. In fact this human intelligence is personalized making the overall security method more secure. Text based passwords are easy to be cracked ^[6]. There is an increased need for an alternate and more complex authentication and authorization methods. Some of the Methods ^{[7] [8]} in the category of Graphical passwords could be susceptible, when Shoulder surfing/cameras/spy devices are used.

The process of establishing secure communication between devices in the Internet of Things (IoT) can be approached by using a One-time-Pad (OTP) protocol. We propose using a known secure multiparty sum protocol for generating a One-time-Pad key using true (physical) random numbers in each device (party). We implemented the proposal using ZeroC-Ice, a middleware for distributed computing. The protocol security properties were analyzed under the assumptions of the Dolev-Yao threat model.

An increased demand for natural products nowadays most specifically probiotics (PRO) is evident since it comes in conjunction with beneficial health effects for the consumers. In this regard, it is well known that encapsulation could affect positively the PRO's viability throughout food manufacturing and long-term storage. This paper aims to analyze and review various multilayer strategies for encapsulation of PRO. Double-layer encapsulation of PRO by electro-hydrodynamic atomization or electrospray technology has been reported along with layer-by-layer assembly and water-in-oil-in-water (W1/O/W2) double emulsions to produce multilayer PRO-loaded carriers. Finally, their applications in food products are presented. The resistance (cover material) and viability of (PRO) to mechanical damage, during gastrointestinal transit and shelf life of these trapping systems are also described. The PRO encapsulation in double and multiple-layer coatings combined with other technologies can be examined to increase the opportunities for new functional products with amended functionalities opening a novel horizon in food technology.

The healthcare sector has undergone a profound transformation, owing to the influential role played by IoMT (Internet of Medical Things) technology. However, there are substantial concerns over these devices' security and privacy-preserving nature. Current literature on IoMT tends to focus on specific security features like data confidentiality or data integrity or data availability or access control and most solutions are simulated and not tested in a real-world live network. This paper proposes a smart secure by design solution that safeguards user’s data during health and wellbeing monitoring of patients locally (home, care-home, and hospital) and remotely. The proposed innovative solution is known as Secure by Design Real Time IoMT Architecture for e-Health Population Monitoring (RTPM) for smart hospitals and any healthcare monitoring management. In this system, keys can also be generated by the patient monitoring system independent to maintain high privacy standard and trust during the monitoring process and to enable the IoMT devices run independently even if the server is compromised and are made safe from external exploits to the client nodes. However, the session keys are controlled by the trusted IoMT server to lighten the IoMT devices overheads and the session keys are securely exchanged between the client system and the monitoring server. The proposed RTPM focuses on addressing the major security requirements for an IoMT system: confidentiality, integrity, availability, conducts authentication, protect from DoS attacks and prevent from non-repudiation attack of patient medical data and the devices in a real time, sensory data communication environment for live e-health monitoring. A secure communication is tested by capturing the live network traffic and the system’s performance analysis of RTPM using different security algorithms with different key sizes of RSA, AES, and SHA shows that resource constraint low powered system can also successfully integrate with high-end state-of-the-art secure parameters and features and have the potential to support real time secure interaction. A stress test is also conducted to ensure that the system can withstand huge key sizes and different data types including multi-media information.

Reconfigurable computing is becoming ubiquitous in the form of consumer-based Internet of Things (IoT) devices. Reconfigurable computing architectures have found their place in safety-critical infrastructures such as the automotive industry. As the target architecture evolves, it also needs to be updated remotely on the target platform. This process is susceptible to remote hijacking, where the attacker can maliciously update the reconfigurable hardware target with tainted hardware configuration. This paper proposes an architecture of establishing Root of Trust at the hardware level using cryptographic co-processors and Trusted Platform Modules (TPMs) and enable over the air updates. The proposed framework implements secure boot protocol on Xilinx based FPGAs. The project demonstrates the configuration of the bitstream, boot process integration with TPM and secure over-the-air updates for the hardware reconfiguration.

Conventional traceability systems in Cambodian agriculture, such as Rubber Supply Chain Management (RSCM), often struggle to provide timely data and fair market prices, leading to mistrust among stakeholders, exploitation by intermediaries, and hindering progress towards ethical sourcing and sustainable practices. This research aims to showcase the potential of integrating blockchain technology, the Internet of Things (IoT), the InterPlanetary File System (IPFS), and Differential Privacy (DP) methods to empower Cambodian rubber farmers. By enhancing transparency, facilitating fair pricing, and promoting sustainable methods in the rubber industry, this integrated approach leverages Hyperledger Fabric (HLF) to create a decentralized and secure system for tracking rubber from its source to the end consumer. Integration with IPFS ensures secure and easily accessible data storage, further enhancing the system’s reliability. Additionally, the implementation of differential privacy techniques safeguards confidential data during information sharing among farmers and supply chain stakeholders, minimizing potential privacy concerns. This comprehensive system encourages consumers to make ethical and sustainable alternative options by providing accessible information on harvesting methods, processing procedures, labor conditions, and environmental impacts. The potential benefits extend beyond Cambodia, serving as a model for other developing countries aiming to modernize and enhance the agricultural distribution networks. Our results show that transaction send rates (TPS) and throughput in systems with and without differential privacy grow with increased transaction volumes. However, the system without differential privacy achieves greater scalability and efficiency above a certain threshold. However, it offers a slightly reduced latency, reflecting a trade-off between privacy and performance efficiency in blockchain-based agricultural traceability systems.

The world has changed. New technologies, new trends, new protocols, new efficient algorithms, and systems have been used widely by civilized countries to have better and more convenient living. In this research, there have been introduced many new terms, technologies, and mechanisms. Moreover, threats, attacks, and vulnerabilities have been studied and a novel scenario has been proposed in order to overcome all these violations that have been presented in this paper. The scenario is based on a security model that has been proposed for critical sectors, such as hospitals, industries, etc., which need efficient solutions to go one step further and improve the secure and efficient living and treatment of people. The aim of this research has been to understand through research the IoT security issues and propose the appropriate solutions based on the most suitable security algorithms. The results, which have been based on the complexity, the throughput, the power consumption, the strength, and the memory usage of the algorithms studied, have been hopeful and helpful for future research and experimentation.

Modification of electrode surface with a selective layer gives the possibility to detect target ana-lytes of forensic interest. 3-(4-trifluoromethyl)-phenyl)-thiophene (ThPhCF3) was deposited on a graphite (G) electrode by electrochemical oxidation and characterized as a receptor for the recognition of synthetic stimulants (2-aminoindane, buphedrone, naphyrone). First, the structural characterization of the polymeric layer were obtained from Raman spectroscopy. Second, the electrochemical profiles of selected synthetic stimulants and their affinity to ThPhCF3/G-modified electrodes were studied using square wave voltammetry and electrochemical impedance spec-troscopy. The values of the adsorption constant show the importance of – PhCF3 groups in the interaction with synthetic stimulants, namely recognition by the formation of hydrogen bonds (Kads (buphedrone) < Kads (2-AI)) and interaction with aromatic H atoms (Kads (buphedrone) < Kads (naphyrone)). It was demonstrated that the polymeric layer derived from thiophene with – PhCF3 group is capable to increase the intensity of the electrochemical signal.

This paper proposed a three-layer distributed simulation network architecture: 1. Distributed virtual simulation network, 2. Perception and control sub-network, and 3. Collaborative communication service network. This simulation architecture runs on a distributed platform. The platform can provide a unique virtual scenario and several simulation services to verify the individual robot system's basic perception, control, and planning algorithms and the distributed collaborative algorithms of heterogeneous multi-robot systems. Furthermore, we designed a simulation experiment scenario for classical heterogeneous robot systems such as unmanned aerial vehicles (UAVs) and unmanned ground vehicles (UGVs). At last, We gave a rough estimation model of the bandwidth.

As technology and multimedia production have advanced, there has been a significant rise in attacks on digital media, resulting in duplicated, fraudulent, and altered data and the infringement of copyright laws. This paper presents a robust and secure digital image watermarking technique that has been implemented in the spatial domain and exploits the erratic and chaotic behaviour of the powerful elementary cellular automata rule-30. The crucial characteristics of the watermarking system, i.e., imperceptibility, capacity, and robustness, have been perfectly balanced by the suggested blind watermarking technique. In this approach, prior to embedding, the grayscale watermark image is downsized to its two Most Significant Bits (MSBs). Then, the 2-MSBs watermark is encrypted using an ECA rule-30 so as to level up the security attribute of the system. Then, the host image is scrambled using ECA rule-30 to distribute the watermark pixels throughout the host image and thus achieve the highest robustness against geometrical attacks. Finally, the encrypted watermark data is embedded into the scrambled host image using the ECA rule-30-based embedding key. The proposed method performs better in terms of imperceptibility, capacity, and robustness when compared to several systems with similar competencies. The simulation's findings demonstrate strong imperceptibility as evaluated by the Peak Signal-to-Noise Ratio (PSNR), which has an average value of 58.3735 dB and a high payload. The experimental outcomes, observed across a diverse range of standardized attack scenarios, unequivocally establish the ascendancy of the proposed algorithm over competing methodologies in the realm of image watermarking.

This research aimed to determine the effect of alkaline treatment on zalacca midrib fiber (ZMF) concerning various aspects such as thermal stability, crystallinity index, interfacial bonding, interfacial shear strength, water absorption capacity, as well as conducting Scanning Electron Microscopy (SEM). This investigation extended to evaluating the mechanical properties of composites enriched with microcrystalline cellulose with prosthetic socket materials available on the market. Subsequently, ZMF was obtained by splitting and soaking zalacca midrib for 12 hours. Each of ZMF was removed from the midrib and soaked in 5% sodium hydroxide for 3, 6, 9, and 12 hours. The composite material was molded by mixing 10% microcrystalline cellulose with a rotational speed of 150 rpm, maintaining a temperature of 40°C, and continuing the mixing process for 30 minutes. As a result of the alkaline treatment, several positive effects were observed, including increased fiber density, improved particle bonding, increased thermal compatibility, and cleaner fiber surfaces, attributed to reduced levels of hemicellulose, lignin, pectin, and other impurities as confirmed by SEM analysis. The microcrystalline cellulose added to the composite increased the interfacial shear strength, and tensile strength increased by 56.74%, composite flexural strength increased by 76.43%. The SEM analysis results showed that the composite with ZMF on the base fiber broke during the tensile test because fiber experienced an increase in interfacial bonding between fiber and the matrix. The water absorption test showed that untreated fiber had a higher level of absorption

The influence of short term water absorption on the mechanical properties of halloysite nanotubes-multi layer graphene reinforced polyester hybrid nanocomposites has been investigated. The addition of nano-fillers significantly increased the flexural strength; tensile strength and impact strength in dry and wet conditions. After short term water exposure; the maximum microhardness; tensile; flexural and impact toughness values were observed at 0.1 wt% MLG. The microhardness increased up to 50.3%; tensile strength increased up to 40% and flexural strength increased up to 44%. Compared to dry samples; the fracture toughness and surface roughness of all types of produced nanocomposites were increased that may be attributed to plasticization effect. Scanning electron microscopy revealed that the main failure mechanism is caused by the weakening of nano-filler-matrix interface induced by water absorption. It was further observed that synergistic effects were not effective at concentration of 0.1 wt% to produce considerable improvement in mechanical properties of produced hybrid nanocomposites.

Delaying the onset of laminar-turbulent transition is an attractive method in reducing skin friction drag, especially on streamlined bodies where Tollmien-Schlichting instabilities are the dominating mechanism for transition. Miniature vortex generators (MVGs) offer an effective approach to attenuate these instabilities by generating counter-rotating vortex pairs. They are placed in pairs within an array and resemble small winglet-type elements. The conventional methodology involves adjusting MVG parameters and conducting computationally expensive DNS and/or downstream stability analyses to assess their effectiveness. However, analyzing the vortex parameters of MVG-generated vortices can potentially guide a more targeted approach in modifying MVG parameters and identifying critical factors for transition delay. Therefore, this study investigates changes in three primary MVG parameters, namely inner distance, periodicity and height, and utilizes computational fluid dynamics (CFD) analysis to create a dataset that examines the characteristics of the generated counter-rotating vortex pairs and their potential in drag reduction. The objective is to establish correlations among these parameters and their influence on delaying transition.

With the daily increasing demands for higher-quality services, mobile Internet of Things (MIoT) are facing various challenges, such as communication security, availability, scalability, etc. Its changing topology features bring a lot of trouble when solving the above problems. Though the evolved cellular network is expected to bring promising solutions, some inherent problems in traditional MIoTs may keep hindering its development. Thus, to overcome above problems, we propose a software-defined MIoTs-based model providing communication security and privacy protection under emergencies. In our scheme, the control plane is responsible to compute routes for online learning devices (OLDs), and forward entries for switches. Taking use of information that OLDs and facilities collect, controller is able to coordinate the overall situation. To ensure the authenticity and reliability of messages sent by OLDs, signature and authentication should be provided. We also introduce an emergency-dealing system. It transplants the multicast technology into software-defined MIoTs to generate a Steiner Tree among impacted nodes, so that OLDs will be informed as soon as emergency happening. The security analysis proves that our scheme is able to ensure the communication security in software-defined MIoTs. The evaluation of performance indicates that our scheme outperforms other existing schemes.

Pursuing "intelligent justice" necessitates an impartial, productive, and technologically driven methodology for judicial determinations. This scholarly composition proposes a framework that harnesses Artificial Intelligence (AI) innovations such as Natural Language Processing (NLP), ChatGPT, ontological alignment, and the semantic web, in conjunction with blockchain and privacy techniques, to examine, deduce, and proffer recommendations for the administration of justice. Specifically, through the integration of blockchain technology, the system affords a secure and transparent infrastructure for the management of legal documentation and transactions while preserving data confidentiality. Privacy approaches, including differential privacy and homomorphic encryption techniques, are further employed to safeguard sensitive data and uphold discretion. The advantages of the suggested framework encompass heightened efficiency and expediency, diminished error propensity, a more uniform approach to judicial determinations, and augmented security and privacy. Additionally, by utilizing explainable AI methodologies, the ethical and legal ramifications of deploying intelligent algorithms and blockchain technologies within the legal domain are scrupulously contemplated, ensuring a secure, efficient, and transparent justice system that concurrently protects sensitive information upholds privacy.

The main focus of this paper is to analyze and discuss the secure software development practices currently being adopted in the industry along with their significance, as well as to identify the challenges faced by developers when undertaking measures and techniques in writing secure software. It is a well-known fact that software security has been the top priority of many software companies such as Google and Facebook to thwart attackers and protect user data in this world full of cybercriminals. Understanding how most software companies in the industry operate to ensure security helps developers to identify strengths and weaknesses in their current security frameworks. Hence, by researching into previous literature and papers that are relevant to the topic and by conducting an interview with a professional in the field, this paper provides insights on the most popular secure software development framework and practices in the world as well as problems faced by companies when adopting these practices. Several security practices and activities that are required to create secure software are discovered alongside the problems that arise when companies are trying to apply these practices. This paper also proposes a few solutions that can be used to resolve these problems, which can be easily understood and implemented by software companies to transition into a truly secure software development environment.

This paper builds on previous work introducing the Secure Remote Update Protocol (SRUP)—a secure communications protocol for Command & Control applications in the Internet of Things, built on top of MQTT. This paper builds on the original protocol, and introduces a number of additional message types: adding additional capabilities to the protocol. We also discuss the difficulty of proving that a physical device has an identity corresponding with a logical device on the network, and propose a mechanism to overcome this within the protocol.

This paper examines dynamic identity, as it pertains to the IoT; and explores the practical implementation of a mitigation to some of the key weaknesses of a conventional dynamic identity model. This paper explores human-centric and machine-based observer approaches for confirming device identity, permitting automated identity confirmation for deployed systems. It also assesses the advantages of dynamic identity in the context of identity revocation permitting secure change of ownership for IoT devices. The paper explores use-cases for human and machine-based observation for authentication of device identity when devices join a C2 network, and considers the relative merits for these two approaches for different types of system.

Glucose-sensitive films were prepared by the layer-by-layer (LbL) deposition of poly(ethyleneimine) (H-PEI) solution and DNA solution (containing glucose oxidase (GOx)). H-PEI/DNA+GOx multilayer films were constructed using electrostatic interactions. The (H-PEI/DNA+GOx)5 film was then partially decomposed by hydrogen peroxide (H2O2). The mechanism for the decomposition of the LbL film was considered to involve a more reactive oxygen species (ROS) that was formed by the reaction of hemin and H2O2, which then caused nonspecific DNA cleavage. GOx present in the LbL films reacts with glucose to generate hydrogen peroxide. Therefore, decomposition of the H-PEI/DNA+GOx)5 film was observed when the thin film was immersed in a glucose solution. A (H-PEI/DNA+GOx)5 film exposed to a glucose solution for periods of 24, 48 72, and 96 h indicated decomposition of the film increased with the time. The rate of LbL film decomposition increased with the glucose concentration. At pH and ionic strength close to physiological conditions, it was possible to slowly decompose the LbL film at a sub-millimolar glucose concentration.

In the past few decades, the transmission of data over an unsecure channel resulted in an increased rate of hacking. Therefore, the requirement to make multimedia data more secure is increasing day by day. Numerous algorithms are developed to improve efficiency and robustness. In this article, a novel and secure image encryption algorithm is presented. It is based on a modified chaotic logistic map (CLM) that provides the advantage of having less computational time to encrypt an input image. The encryption algorithm is based on Shannon’s idea of using substitution-permutation and one-time-pad network to achieve ideal secrecy. The CLM is used for substitution and permutation to improve randomness and increase dependency on the encryption key. Various statistical tests are conducted, such as Key Space Analysis, Complexity Analysis, Sensitivity Analysis, Strict Avalanche Criteria (SAC), Histogram Analysis, Entropy Analysis, Mean of Absolute Deviation (MAD) Analysis, Correlation Analysis, Contrast Analysis, and Homogeneity to give a comparative analysis of the proposed algorithm and verify its security. As a result of various statistical tests, it is evident that the proposed algorithm is more efficient and robust as compared to previous ones.

With the rise of the Internet of Things (IoT), maintaining data confidentiality and protecting user privacy have become increasingly challenging. End devices in IoT are often deployed in unattended environments and connected to open networks, which can make them vulnerable to physical tampering and other security attacks. Different authentication key agreement (AKA) schemes have been validated to date, but most schemes do not cover the necessary security features or are incompatible with resource-constrained end devices. Besides, their security proofs have been performed under the real-or-random model, which is not guaranteed to be secure in real applications. To reduce the weaknesses, we present an AKA protocol for end devices and servers. The proposal leverages the ECC-based key exchange mechanism and one-way hash function-based message authentication method to achieve mutual authentication, user anonymity, and forward security. Formal security proof of the proposed scheme is performed under the standard model with the elliptic curve encryption computational assumptions, and an automatic formal verification was performed with ProVerif. Further, the performance comparison verifies that our scheme reduces computation and communication costs while providing improved security features.

The Internet of Vehicles (IoV) is an emerging field that has attracted significant attention due to its potential to transform transportation and mobility. IoV enables the development of new services and applications that can improve transportation systems' efficiency, safety, and sustainability. However, ensuring secure and trustworthy communication among the different components of an IoV system is a critical challenge that needs to be addressed. This paper proposes a blockchain-enabled communication framework for secure and trustworthy IoV applications. The proposed framework leverages the security and decentralization features of blockchain technology to provide secure communication channels for different components of the IoV system, including vehicles, infrastructure, and service providers. The proposed framework provides an identity management system to authenticate and authorize users and devices, thereby preventing unauthorized access and data breaches. To evaluate the effectiveness of the proposed framework, we conducted experiments using a real-world IoV scenario, and the results demonstrate that the proposed framework can provide secure and trustworthy communication for IoV applications. The proposed blockchain-enabled communication framework offers a promising approach to address the security and trust challenges in IoV communication systems.

This paper suggests a novel one-dimensional (1D) map to address the limitations of traditional chaotic 1D maps. The main challenge with traditional chaotic 1D maps is the limited control parameter range and the potential risk of collapsing as a result under the finite precision implementation. To overcome these limitations, the new 1D map hybridises the traditional logistic map with tent map, and a linear tent-like function. This hybridization results in a wider range of control parameters to produce chaotic behavior. The dynamic behavior of the new 1D map has been analyzed using well known numerical methods, including the bifurcation diagram and Lyapunov exponent. Both tests have shown their complex and diverse behavior. In addition, a novel image encryption scheme has been devised using the new function as its pseudo-random-number generator. The proposed encryption algorithm has been tested and found to be robust and secure, passing all statistical tests applied to the encrypted images. The results of this study demonstrate the effectiveness of the new 1D map for use in secure image cryptography applications, providing a more robust and secure alternative to traditional chaotic 1D maps. The proposed algorithm has demonstrated high performance in NPCR and UACI tests. It also has shown good results in the MSE and PSNR tests.

Electrospun nanofiber-supported thin film composite membranes are among the most promising membranes for seawater desalination via forward osmosis. In this study, a high-performance electrospun polyvinylidenefluoride (PVDF) nanofiber-supported TFC membrane was successfully fabricated after molecular layer-by-layer polyelectrolyte deposition. Negatively-charged electrospun polyacrylic acid (PAA) nanofibers were deposited on electrospun PVDF nanofibers to form a support layer consisted of PVDF and PAA nanofibers. This resulted to a more hydrophilic support compared to the plain PVDF nanofiber support. The PVDF-PAA nanofiber support then underwent a layer-by-layer deposition of polyethylenimine (PEI) and PAA to form a polyelectrolyte layer on the nanofiber surface prior to interfacial polymerization, which forms the selective polyamide layer of TFC membranes. The resultant PVDF-LbL TFC membrane exhibited enhanced hydrophilicity and porosity, without sacrificing mechanical strength. As a result, it showed high pure water permeability and low structural parameter values of 4.12 Lm⁻²h⁻¹bar⁻¹ and 221 µm, respectively, significantly better compared to commercial FO membrane. Layer-by-layer deposition of polyelectrolyte is therefore a useful and practical modification method for fabrication of high performance nanofiber-supported TFC membrane.

The main purpose of this work was to tests of form and size of fatigue wear of the top layer of oil gear pump wheel (3PW-BPF-24). The object of tests was operated during a determined number of hours at strictly controlled operational and environmental parameters. A microscope of focal differentiation by Alicona InfiniteFocus G4 (with Focus-Variation optical measuring technology) was used for an identification, measurement and description of noticed superficial defects, which resulted from the fatigue process of the top layer and an earlier thermochemical treatment. The work was finished with an analysis of obtained results (based on the analysis of 3D scans) and conclusions concerning about optimization of the thermal treatment. Taking into consideration the presented results (suggestions) in the technology of improving strength properties of gear wheels (of this type oil pumps) may render it possible to obtain an appropriate fatigue endurance of the top layer, i.e. a minimization of observed superficial defects.

Precise monitoring of different environmental parameters and contaminations during food processing and storage is a key factor for maintaining its safety and nutritional value. Thus, developing reliable, efficient, cost-effective sensor devices for these purposes is of utmost importance. In this paper, we show that Poly-(diallyl-dimethylammonium chloride)/reduced Graphene oxide (PDAC/rGO) films produced by a simple Layer-by-Layer deposition can be effectively used to monitor temperature, relative humidity and the presence of volatile organic compounds as indicators for spoilage odors. At the same time, they show potential for electrochemical detection of organophosphate pesticide dimethoate. By monitoring the resistance/impedance changes during temperature and relative humidity variations or upon the exposure of PDAC/rGO films to methanol, good linear responses were obtained in the temperature range of 10-100 °C, 15-95 % relative humidity, and 35 ppm - 55 ppm of methanol. Moreover, linearity in the electrochemical detection of dimethoate is shown for the concentrations in the order of 102 µmol dm−3. The analytical response to different external stimuli and analytes depends on the number of layers deposited, affecting sensors’ sensitivity, response and recovery time, and long-term stability. The presented results could serve as a starting point for developing advanced multimodal sensor devices and sensor arrays with high potential for analytical applications in food safety and quality monitoring.

A nanostructured electrochemical bi-sensor system for analysis of milks has been developed using the Layer by Layer technique. The non-enzymatic sensor [CHI+IL/CuPcS]2, is a layered material containing a negative film of the anionic sulfonated copper phthalocyanine (CuPcS) acting as electrocatalytic material, and a cationic layer containing a mixture of an ionic liquid (IL) (1-butyl-3-methylimidazolium tetrafluoroborate) that enhances the conductivity and chitosan (CHI) that facilitates the enzyme immobilization. The biosensor ([CHI+IL/CuPcS]2-GAO) results from the immobilization of galactose oxidase on the top of the LbL layers. FTIR, UV-vis and AFM have confirmed the proposed structure and cyclic voltammetry has demonstrated the amplification caused by the combination of materials in the film. Sensors have been combined to form an electronic tongue for milk analysis. Principal Component Analysis has revealed the ability of the sensor system to discriminate between milk samples with different lactose content. Using PLS-1 calibration models, correlations have been found between the voltammetric signals and chemical parameters measured by classical methods. PLS-1 models provide excellent correlations with lactose content. Additional information about other components such as fats, proteins and acidity can also be obtained. The method developed is simple and the short response time permits its use in assaying milk samples on-line.

Due to the rapid growth of the Internet of Things (IoT), securing communications between a huge number of devices has become very difficult. Access controls and authentication secure the connection between IoT devices and protect sensitive data from unauthorized users or malicious attackers. In this paper, we provide a comprehensive review to emphasize the critical role of authentication and access control in securing IoT environments. This paper explores different types of access controls, like Attribute-Based Access Control and Role-Based Access Control. Furthermore, it demonstrates different authentication techniques, like passwords and biometrics. Based on the previous mechanisms, we discuss different IoT security challenges regarding authentication and access control mechanisms and highlight future directions. In addition, this paper investigates the integration between access control and authentication to safeguard IoT communications.

IP Multimedia Subsystem (IMS) supports high-speed transmission of multi-media like data, audio, and video between mobiles and other wireless devices. IMS is the most suitable for multimedia communication across multiple networks using the Internet of Things (IoT) and cloud computing. IoT-IMS can efficiently manage the huge amount of data generated by smart devices for audio-video during live streaming applications. During these services, the main problem is that an intruder can launch a Session Initialization Protocol (SIP) messages flooding attack on IMS that does not have the functionality to prevent itself from these types of attacks. In this paper, an intrusion detecting and preventing system (IDPS) is proposed that effectively detects the register flooding and spoofing attacks using SIP messages. We proposed a watermark embedding algorithm on the user side and an extraction algorithm on receiving side. A test-bed is set up for IMS where we have considered four different scenarios to evaluate the IDPS approach as compared to counterparts. Results illustrate the dominance of our scheme in terms of response time, register flooding attack detection ratios, CPU load utilization, fault detection ratio, and memory utilization. The fault detection ratio averagely 98.18

Counterfeiting and theft have always been problems that incur high costs and results in considerable losses for the international markets. In this research paper, we will address the issue of counterfeiting while using RFID technology in retailer systems or other industries by presenting a new anti-counterfeiting and anti-theft system for the retailer market. This system will address the two above mentioned issues and provide a solution that can save the retailer systems millions of dollars yearly. This proposed system will achieve the objective of preventing or minimising the counterfeiting and theft of tagged products. At the same time, it will provide a strong indication for suspiciously sold or obtained items. Furthermore, we conducted a security analysis to prove the correctness of our protocol on the basis of the strand spaces.

Due to the uniqueness of the underwater environment, traditional data aggregation schemes face many challenges. Most existing data aggregation solutions do not fully consider node trustworthiness, which may result in the inclusion of falsified data sent by malicious nodes during the aggregation process, thereby affecting the accuracy of the aggregated results. Additionally, because of the dynamically changing nature of the underwater environment, current solutions often lack sufficient flexibility to handle situations such as node movement and network topology changes, significantly impacting the stability and reliability of data transmission. To address the aforementioned issues, this paper proposes a secure data aggregation algorithm based on a trust mechanism. By dynamically adjusting the number and size of node slices based on node trust values and transmission distances, the proposed algorithm effectively reduces network communication overhead and improves the accuracy of data aggregation. Due to the variability in the number of node slices, even if attackers intercept some slices, it is difficult for them to reconstruct the complete data, thereby ensuring data security.

With the emergence of Advance Logistics, the logistics industry has witnessed significant advancements, leading to a greater reliance on intelligent technologies. These technologies play a crucial role in gathering and transmitting logistics data, but they also introduce security and privacy risks to logistics management systems. The sharing of customer-sensitive information among stakeholders for efficient operations becomes vulnerable to unauthorized access, thus compromising privacy. This, amongst others, is a critical problem that needs to be addressed. The unique features of a cryptographic hash function, including immutability, efficient verification, and anonymity, make it a transformative technology that has the potential to address the mentioned challenges in various sectors. This disruptive technology offers solutions by ensuring data integrity, enabling quick verification, and preserving privacy. The findings suggest that employing Cryptographic Hash Functions to share customer data among logistics partners offers robust protection against cyber-attacks. The proposed system guarantees asset security, and as demonstrated by the case study evaluation, exhibits strong resilience in safeguarding against various security and privacy threats. Although this study is significant, it does have limitations. One of these limitations is the considerable overlap between logistics research and supply chain management (SCM). While our focus was on logistics tasks, we did not extensively delve into the broader context of SCM

In recent years, Cloud Computing and Big Data have been considered the most attractive areas that are revolutionizing the IT world. Cloud Computing paradigm has recently appeared that allows running proprietary or difficult portable applications outside their original software environment on one or more virtual hardware platforms. Therefore, we are to developing such techniques which make it possible to secure communication between the communicating Cloud entities. These techniques must take into account several factors due to the data transmitted in this type of environment is proprietary and of significant size. Conventional data security techniques are not suitable for today's cloud usage. Hence, the main research of this thesis is to define an adaptable architecture with the aim to propose a scalable system that supports cloud services.

Secure development is a proactive approach to cyber security. Rather than building a technological solution and then securing it in retrospect, secure development strives to embed good security practices throughout the development process and thereby reduces risk. Unfortunately, evidence suggests secure development is complex, costly, and limited in practice. This article therefore introduces security-focused prototyping as a natural precursor to secure development that embeds security at the beginning of the development process, can be used to discover domain specific security requirements, and can help organisations navigate the complexity of secure development such that the resources and commitment it requires are better understood. Two case studies–one considering the creation of a bespoke web platform and the other considering the application layer of an Internet of Things system–verify the potential of the approach and its ability to discover domain specific security requirements in particular. Future work could build on this work by conducting case studies to further verify the potential of security-focused prototyping and even investigate its capacity to be used as a tool capable of reducing a broader, socio-technical, kind of risk.

SerIoT is a Research and Innovation Project funded by the European Commission to demonstrate secure networks for the Internet of Things (IoT). This paper presents an overview of the design for smart and secure network infrastructures for the IoT, based on Software Defined Networks (SDN), named the SerCPN system, whose main component is a smart SDN-Controller with online cognitive security surveillance and reporting, which establishes and dynamically modifies paths that enhance security for IoT devices and end users, and offers a high quality of service (QoS) with required security constraints. This online cognitive surveillance and path management is based on the Cognitive Packet Network (CPN) principle and uses Random Neural Networks (RNN) for decision making.

The layer-by-layer (LBL) fabrication method allows for controlled microstructure morphology and vertical component distribution, and also offers a reproducible and efficient technique for fabricating large-scale organic solar cells (OSCs). In this study, polymer D18 and PYIT-OD are employed to fabricate all-polymer solar cells (all-PSCs) using the LBL method. Morphological studies reveal that the use of additives optimizes the microstructure of the active layer, enhancing the crystallinity and charge transport capability. The optimized device with 2% CN additive significantly reduces bimolecular recombination and trap-assisted recombination. All-PSCs fabricated by the LBL method based on D18/PYIT-OD deliver a power conversion efficiency (PCE) of 15.07%. Our study demonstrates the great potential of additive engineering via LBL fabrication method in regulating microstructure of active layers, suppressing charge recombination, and enhancing the photovoltaic performance of devices.

The deposition of dust particles on solar panel modules constitutes a significant challenge, leading to a potential reduction in solar cell performance. This work tackles this issue by investigating the surface modification of a layer of transparent indium tin oxide (ITO), with a detailed analysis of the influence of its characteristics via different annealing conditions/processing. The ITO layer has been studied to enhance its characteristics for dust removal applications. Of particular note is that the developed ITO layer can be applied to dust removal using electrostatic or magnetic-based approaches. Thus, the correlation between annealing gas (using Argon, Oxygen, and Nitrogen), annealing temperature, and annealing ramping rate is explored with the obtained surface topography, as well as electrical and optical properties. The developed ITO layers annealed in the Argon medium at 600°C with an annealing ramping rate of 50°C/s showed smooth surface roughness, the highest electrical conductivity, and a relatively low refractive index. Such findings can play a crucial role in the future implementation of using the enhanced ITO layer for dust mitigation in solar panels, thus improving their long-term performance.

In recent years, drones have become increasingly prevalent in a wide range of applications, performing complex and critical tasks. To accomplish these tasks, drones cooperate by forming a Fly Ad-hoc Network (FANET) using specific routing protocols for communication. However, most of the routing protocols used in this type of network lack appropriate built-in security mechanisms, which creates numerous security challenges and concerns. To reduce the resulting security vulnerabilities and mitigate the impact of potential attacks, it is crucial to address these challenges before any deployment of FANETs. In this paper, we address two of the most harmful routing attacks - Sybil and Gray Hole and propose mitigating techniques to alleviate these attacks on FANET routing protocols. The proposed solution is secGPSR a secure version of the Greedy Perimeter Stateless Routing Protocol (GPSR). We validate the robustness of secGPSR through simulation using Omnet++ and present the results which show its effectiveness against Sybil and Gray Hole attacks.

As the application of cyber-physical systems (CPSs) becomes more and more widespread, its security is becoming a focus of attention. Currently, there has been much research on the security defense of the physical layer of the CPS. However, most of the research only focuses on one of the aspects, for example, attack detection, security state estimation or recovery control. Obviously, the effectiveness of security defense targeting only one aspect is limited. Therefore, in this paper, a set of security defense processes is proposed for the case that a CPS containing multiple sensors is subject to three kinds of stealthy attacks (i.e., zero-dynamics attack, covert attack, and replay attack). Firstly, the existing attack detection method based on improved residuals is used to detect stealthy attacks. Secondly, based on the detection results, an optimal state estimation method based on improved Kalman filtering is proposed to estimate the actual state of the system. Then, based on the optimal state, internal model control (IMC) is introduced to complete the recovery control of the system. Finally, the proposed methods are integrated to give a complete security defense process, and the simulation is verified for three kinds of stealthy attacks. The simulation results show that the proposed methods are effective.

The rapid development of quantum computing devices promises powerful machines with capabilities that solve a wide range of problems that traditional computers cannot. Therefore, quantum computers generate new threats at unprecedented speed and scale and specifically pose an enormous threat to encryption. Lattice-based cryptography is considered to be the rival to a quantum computer attack and the future of post-quantum cryptography. So, cryptographic protocols based on lattices have a variety of benefits, like security, efficiency, lower energy consumption, and speed. In this work, we study the most well-known lattice-based cryptosystems while a systematic evaluation and comparison is presented also, and focuses on their strengths and weaknesses.

After the great success of Mobile wallet, the Internet of Things (IoT) leaves the door wide open for consumers to use their connected devices to access their bank accounts and perform routine banking activities from anywhere, anytime and with any device. However, consumers need to feel safe when interacting with IoT-based payment systems, and their personal information should be protected as much as possible. Unlike as usually done in the literature, in this paper, we introduce two lightweight and secure IoT-based payment protocols based on an identity-based signature scheme. We adopt a server-aided verification technique to construct the first scheme. This technique allows to outsource the heavy computation overhead on the sensor node to a cloud server while maintaining the user's privacy. The second scheme is built upon a pairing-free ECC-based security protocol to avoid the heavy computational complexity of bilinear pairing operations. The security reduction results of both schemes are held in the Random Oracle Model (ROM) under the discrete logarithm and computational Diffie-Hellman assumptions. Finally, we experimentally compare the proposed schemes against each other and against the original scheme on the most commonly used IoT devices: a smartphone, a smartwatch and the embedded device Raspberry Pi. Compared with existing schemes, our proposed schemes achieve significant efficiency in the term of communication and computational overheads

As e-commerce services and Internet technology have rapidly developed in recent years, many services and applications integrating these technologies can now be completed online. These commercial activities include online auctions, online ticketing and online payments. The client shops from the store online, andthe store delivers the goods to the client. The goods can be divided into digital products without entities, as well as actual entities. If it is a physical product, the store will deliver the package to the client through itslogistics. However, there have been many cases of switched goods purchased by clients in recent years. Earlier, some scholars proposed a security mechanism with a subliminal channel for E-cash and digital content. Only the sender and the receiver would know that the secret information was hidden in the signature. So the privacy of this subliminal message couldbe ensured. We apply this concept to the logistics environment to design secure logistics architecture with subliminal messages. The client can check the subliminal message of the received package, and know whether the package has been switched by malicious people. In addition, the proposed scheme also applies sensor technology;the client can check the GPS location, the temperature and humidity at any time during the delivery process. So intelligent logisticswouldthereby be achieved. This paper proposes an intelligent and secure package sensoring logistics system based on a subliminal channel. The proposed architecture uses the related mechanisms tosolve the problems of a logistics system, including how to achieve mutual authentication, data integrity, anti-switch package, package location and status tracing, resisting replay attacks, forward and backward secrecy, and non-repudiation issues.

Even if the field of medicine has made great strides in recent years, infectious diseases caused by novel viruses that damage the respiratory system continue to plague people all over the world. This type of virus is very dangerous, especially for people who deal with serious long-term breathing problems, like triggering asthma, pneumonia, or bronchitis infections. Thus, this paper demonstrates a new Secure Machine Learning Monitoring System for a model for virus detection. Our proposed model makes use of 4 basic emerging technologies, Internet of Things (IoT), Wireless Sensor Networks (WSN), Cloud Computing (CC), and Machine Learning (ML), to detect dangerous types of viruses that infect people or animals causing panic worldwide and deregulating human daily life. The proposed system is a robust system that could be established in various buildings, like hospitals, entertainment halls, universities, etc., and will provide accuracy, speed, and privacy for data collected in the detection of viruses.

Wireless Sensor Network is an emerging technology and the collaboration of wireless sensors becomes one of the active research areas to utilize sensor data. Various sensors collaborate to recognize the changes of a target environment, to identify, if occurs, any radical change. For the accuracy improvement, the calibration of sensors has been discussed, and sensor data analytics are becoming popular in research and development. However, they are not satisfactorily efficient for the situations where sensor devices are dynamically moving, abruptly appearing or disappearing. If the abrupt appearance of sensors is a zero-day attack and the disappearance of sensors is an ill-functioning comrade, then sensor data analytics of untrusted sensors will result in an indecisive artifact. The pre-defined sensor requirements or meta-data based sensors verification is not adaptive to identify dynamically moving sensors. This paper describes a deep-learning approach to verify the trustworthiness of sensors by considering the sensor data only, without having to use meta-data about sensors or to request consultation from a cloud server. The contribution of this paper includes 1) quality preservation of sensor data for mining analytics and 2) authenticity verification of dynamically moving sensors with no external consultation.

This paper considers a two-way relay network, where two source nodes exchange messages through several relays in the presence of an eavesdropper, and the channel state information (CSI) of the eavesdropper is imperfectly known. The amplify-and-forward relay protocol is used and the relay beamforming weights are designed. The model is built up to minimize the total relay transmit power while guaranteeing the quality of service at users and preventing the eavesdropper from decoding the signals. Due to the imperfect CSI, a semi-infinite programming problem is obtained. An algorithm is proposed to solve the problem, and the iterative points are updated through the linesearch technique, where the feasibility are preserved during iterations. The optimality property is analyzed. The obtained subproblems are quadratic constrained quadratic programming problems, either with less than $4$ constraints or with only one variable, which are solved optimally. Simulation results demonstrate the importance of the proposed model, and imply that the proposed algorithm is efficient and converges very fast, where more than 85% of the problems are solved optimally.

Steganography is the branch of cryptology that deals with concealing information inside another information. it’s prefer over cryptography as it hides a message inside another innocent looking message, while cryptography shows scrambled message that might arouse attention of an attacker, however the challenges in steganography is the modification of carrier that causes some abnormalities which is detectable and often the methods are not optimize. This paper presents a novel approach in cryptography and steganography, which utilizes mathematical concept of bits combination to optimize time of transmission using sets of multiple transmitter, and receiver’s addresses where each abstractly represents a bits combination without itself modified. In addition, the paper introduces a concept of dynamical clockwise and anti-clockwise rotation of bits combination over addresses after every transmission to reinforce resistivity against steganalysis.

Abstract: Insecure and portable devices in the smart city’s Internet of Things (IoT) network are increasing at an incredible rate. Various distributed and centralized platforms against cyber-attacks have been implemented in recent years, but these platforms are inefficient due to their constrained levels of storage, high energy consumption, the central point of failure, underutilized resources, high latency, and etc. In addition, the current architecture confronts the problems of scalability, flexibility, complexity, monitoring, managing & collecting of IoT data, and defend against cyber-threats. To address these issues, the author presents distributed and decentralized Blockchain-Software Defined Networking (SDN) based energy-optimized architecture for IoT in smart cities. Thus, SDN continuous observing, controlling, managing IoT devices activities and detect possible attacks in the network; Blockchain provides adequate security & privacy against cyber-attacks, reduces the central point of failure issues; Network Function Virtualization (NFV) are used to saving energy, load balancing, as well as increasing the lifetime of the entire network. Also, we introduce a Cluster Head Selection (CHS) algorithm to reduce the energy consumption in the presented model. Finally, we analyze the performance using various parameters (e.g. throughput, response time, gas consumption, communication overhead) and demonstrating the result that provides higher throughput, lower response time, lower gas consumption than existing works for smart cities.

Crystalline silver thin layers were obtained by high-energy pulsed laser ablation without heating of the deposition substrate. The fluid Plateau-Rayleigh (PRI), Rayleigh – Taylor (RTI) and Richtmyer – Meshkov (RMI) instabilities, as well as crown splash induced during pulsed laser deposition (PLD) in high energy regime, resulting in ring and pearl shaped structures, offer the benefit of increased sorption surface. These morphological structures obtained for the silver thin layers make them of interest for catalytic applications. The study presented with this work addresses both the fundamental and applied issues on the morphological structures obtained for the silver thin layer and their catalytic function in organic processes. In this sense, the catalytic action of the thin silver layer was highlighted by modifications of the Reactive Blue 21 dye (C.I.) in aqueous solution with sodium bicarbonate. Specific investigations and analyzes were carried out by electron microscopy and elemental analysis (SEM-EDX), atomic force microscopy (AFM) and profilometry, mass spectrometry, ablation plasma diagnosis, diffractograms (XRD), as well as IR spectroscopy (FTIR). In addition to the experimental investigation and analyzes, simulation of the ionization energy threshold was conducted in COMSOL for complementary evaluation on the involved processes and phenomena.

The present Feature Paper highlights the application of bacterial surface (S-) layer proteins as versatile components for the fabrication of biosensors. One technologically relevant feature of S‑layer proteins is their ability to self-assemble on many surfaces and interfaces to form a crystalline 2D protein lattice. The S-layer lattice on the surface of a biosensor becomes part of the interface architecture, linking the bioreceptor to the transducer interface, which may cause signal amplification. The S-layer lattice as ultrathin, highly porous structure with functional groups in a well-defined special distribution and orientation and an overall anti-fouling characteristics can significantly raise the limit in terms of variety and ease of bioreceptor immobilization, compactness of bioreceptor molecule arrangement, sensitivity, specificity, and detection limit for many types of biosensors. The present paper discusses and summarizes examples for the successful implementation of S-layer lattices on biosensor surfaces in order to give a comprehensive overview on the application potential of these bioinspired S-layer protein-based biosensors.

Here, we investigate the actuation dynamics of a micro device with different intervening liquids between the actuating components under the influence of Casimir and dissipative hydrodynamic forces. This is enabled via phase space portraits, which demonstrate that by increasing the dielectric response of the intervening layer the device may not come into stiction due to the decreasing in magnitude Casmir force. Moreover, it is feasible to expand area of motion using intervening liquids with lower dynamic viscosity or increasing the slip length of the intervening fluid. Finally, under the influence of an external driven force, which is the realistic case for possible applications, the system can reach stable oscillation at larger separations with an amplitude higher for the liquid that lead to lower Casimir and hydrodynamic forces.

Efficient member revocation and strong security against attacks are prominent requirements in group signature schemes. Among the revocation approaches Verifier-local revocation is the most flexible and efficient method since it requires to inform only the verifiers regarding the revoked members. The verifier-local revocation technique uses a token system to manage members’ status. However, the existing group signature schemes with verifier-local revocability rely on weaker security. On the other hand, existing static group signature schemes rely on a stronger security notion called, full-anonymity. Achieving the full-anonymity for group signature schemes with verifier-local revocation is a quite challenging task. This paper aims to obtain stronger security for the lattice-based group signature schemes with verifier-local revocability, which is closer to the full-anonymity. Moreover, this paper delivers a new key-generation method which outputs revocation tokens without deriving from the users’ signing keys. By applying the tracing algorithm given in group signature schemes for static groups, this paper also outputs an efficient tracing mechanism. Thus, we deliver a new group signature scheme with verifier-local revocation that satisfies a stronger security from lattices.

In recent years, the internet of things has been widely utilized in various fields, such as in smart factories or connected cars. As its domain of application has expanded, it has begun to be employed using multi-server architectures for a more efficient use of resources. However, because users wishing to receive IoT services connect to multi-servers over wireless networks, this can expose systems to various attacks and result in serious security risks. To protect systems (and users) from potential security vulnerabilities, a secure authentication technology is necessary. In this paper, we propose a smart card-based authentication protocol, which performs the authentication for each entity by allowing users to go through the authentication process using a smart card transmitted from an authentication server, and to login to a server connected to the IoT. Furthermore, the security of our proposed authentication protocol is verified by simulating a formal verification scenario using AVISPA, a security protocol-verification tool.

With the proliferation of locating devices, more and more raw spatial trajectories are formed, and many works enrich these raw trajectories with semantics, and mine patterns from both raw and semantic trajectories, but access control of spatial trajectories is not considered yet. We present a multi-policy secure model for semantic spatial trajectories. In our model, Mandatory Access Control, Role Based Access Control and Discretionary Access control are all enforced, separately and combined, and we represent the model semi-formally in Ontology Web Language.

In response to growing industrial demands, necessitated by larger ships and increased cargo volumes, many port authorities worldwide are undertaking a significant expansion of their infrastructure to increase their capacity. Significant expansion raises challenges such as potential congestion and environmental concerns, especially for port located in urban area as the case study explored in this paper. To address these issues, the study employs a combination of scenario analysis developed in collaboration with the port authority and logistic system simulation. This approach assesses the capacity of existing access gates to handle the increased trucking traffic and optimizes the unloading process of construction trucks at a new terminal. Key findings suggest that while the current gate capacities are adequate, optimizing unloading times at the new terminal is critical to prevent road congestion in urban area before the gate and reduce negative impacts such as sound and atmospheric pollution. The study advocates for an appointment system during peak hours to manage traffic flow effectively and underscores the importance of collaboration between the city and port authorities in managing truck traffic to mitigate congestion on the city side. Nonetheless, the study recognizes certain constraints, including the incomplete evaluation of the influence of intermodal transport on truck traffic. Furthermore, the study emphasizes the need for future research to consider the correlation between vehicle numbers and service levels, aiming to effectively adjust the time in the system.

This paper reports results of analysis of field ion emission mechanism from tungsten-epoxy composite emitters that are compared to tungsten nano-field emitters. In this context, the mechanism of emission from this type of emitters is described based on a theory of induced conductive channels. The tungsten emitters were prepared using the electrochemical polishing technique and coated with a layer of the epoxy resin. Field ion microscope (FIM) analyses are reported including the study of the emission-ion density distributions from both the uncoated and coated emitters. Two forms of emission patterns have been observed in the ion emission microscopy technique describing the differences in the emission mechanism of both types of emitters. The observed results show: (a) the expected crystalline surface atomic distribution images of the field ion microscopy in the case of uncoated tungsten tips, and (b) randomly distributed emission spots that describe the locations of the induced conductive channels inside the resin coating layer.

The use of Physical Unclonable Functions (PUFs) linked to the manufacturing process of the electronic devices supporting applications that exchange critical data over the Internet has made these elements essential to guarantee the authenticity of said devices, as well as the confidentiality and integrity of the information they process or transmit. This paper describes the development of a configurable PUF/TRNG module based on Ring Oscillators (ROs) that takes full advantage of the structure of modern programmable devices offered by Xilinx 7 Series families. In this work, the increase in hardware efficiency of the proposed architecture is used with a double objective. On the one hand, perform an exhaustive statistical characterization of the results derived from the exploitation of RO configurability. On the other hand, undertake the development of a new version of the module that requires a smaller amount of resources while considerably increasing the number of output bits compared to other proposals previously reported in the literature. The design as a highly parameterized Intellectual Property (IP) module connectable through a standard interface to a soft- or hard-core general-purpose processor greatly facilitates its integration into embedded solutions, while accelerating the validation and characterization of this element on the same electronic device that implements it. The studies carried out reveal adequate values of reliability, uniqueness and unpredictability when the module acts as a PUF, as well as acceptable levels of randomness and entropy when it acts as a True Random Number Generator (TRNG). They also illustrate the ability to obfuscate and recover identifiers or cryptographic keys of up to 4 096 bits using an implementation of the PUF/TRNG module that requires only a 4×4 CLB array to accommodate the RO bank.

String matching is an important part in many real world applications. It must robust against variations in string field. In record linkage for two different datasets matching should detect two patients in common in spite of small variations. But it becomes difficult in case of confidential data because sometimes data sharing between organizations become restricted for privacy purposes. Several techniques have been proposed on privacy-preserving approximate string matching such as Secure Hash Encoding etc. Relative to other techniques for approximate string matching Homomorphic encryption is very new. In this paper we have proposed a Homomorphic Encryption based approximate string matching technique for matching multiple attributes. There is no solution currently available for multiple attributes matching using Homomorphic encryption. We have proposed two different methods for multiple attributes matching. Compare to other existing approaches our proposed method offers security guarantees and greater matching accuracy.

IoT is a new communication paradigm that gains a very high importance in the past few years. This communication paradigm supports various heterogeneous applications in many fields and with the dramatic increase of the number of sensor devices, it becomes a demand. Designing IoT networks faces many challenges that include security, massive traffic, high availability, high reliability and energy constraints. Thus, new communication technologies and paradigms should be deployed for IoT networks to overcome these challenges and achieve high system performance. Distributed computing techniques (e.g. fog and MEC), software defined networking (SDN), network virtualization and blockchain are common recent paradigms that should be deployed for IoT networks, either combined or individually, to achieve the main requirements of the IoT networks at a high system performance. Fog computing is a form of edge computing that has been developed to provide the computing capabilities (e.g. storage and processing) at the edge of the access network. Employing Fog computing in IoT networks, as an intermediate layer between IoT devices and the remote cloud, becomes a demand to make use of the edge computing benefits. In this work, we provide a framework for the IoT system structure that employs an edge computing layer of Fog nodes controlled and managed by SDN network with the blockchain technology to achieve a high level of security for latency sensitive IoT applications. The proposed system employs SDN network with distributed controllers and distributed OpenFlow switches; these switches are enabled with limited computing and processing capabilities. Furthermore, a data offloading algorithm is developed to allocate different processing and computing tasks to the distributed OpenFlow switches with available resources. Moreover, a traffic model is proposed to model and analyze the traffic among different parts of the network. The proposed work achieves various benefits to the IoT network, such as the latency reduction, security improvement and high efficiency of resources utilization. The proposed algorithm is simulated and also the proposed system is experimentally tested over a developed testbed to validate the proposed structure. Experimental results show that the proposed system achieves higher efficiency in terms of latency, security and resource utilization.

A new attack against the Kirchhoff-Law-Johnson-Noise (KLJN) key distribution system is introduced. The attack is based on 1) Utilizing the dc-voltage-source - which we put at Alice’s end in our mathematical modeling of the attack-that could exist due to errors, imbalances, Electromagnetic interference and etc.2) On studying the number of samples per bit in the security key that the measured Alice/Bob voltages exceeds or falls below a threshold voltage, respectively. The threshold voltage is the average between dc voltages across low and high resistors- generated by a dc-voltage source. We count the number of samples the voltage at Bob’s end (containing both the noise and dc components) exceeds the threshold voltage and how many times it falls below the threshold to judge whether the resistor can be guessed as low or high for every cycle. Also for a pre-specified key-length we count the number of high resistance estimations per bit –at Bob’s end-according to the previous criterion and the non-successful estimations per bit to judge the final guessed resistor value at Alice’s end and Bob’s end, where if we have more bits with most of its measured samples are above the threshold voltage then we will predict Bob’s resistance as high resistance, otherwise we predict Bob’s resistance to be low resistance. The Simulation was conducted and the attack proved that it is successful unless the temperature increased dramatically to ranges more than a threshold temperature ~ Kelvin that increases when the number of samples per bit increases.

The rapid adoption of hydrogen as an eco-friendly energy source has necessitated the development of intelligent power management systems capable of efficiently utilizing hydrogen resources. However, guaranteeing the security and integrity of hydrogen-related data has become a significant challenge. This paper proposes a pioneering approach to ensure secure hydrogen data analysis through the integration of blockchain technology, enhancing trust, transparency, and privacy in handling hydrogen-related information. By combining blockchain with intelligent power management systems, the efficient utilization of hydrogen resources becomes feasible. The utilization of smart contracts and distributed ledger technology facilitates secure data analysis, real-time monitoring, prediction, and optimization of hydrogen-based power systems. The effectiveness and performance of the proposed approach are demonstrated through comprehensive case studies and simulations. Notably, our prediction models, including ABiLSTM, ALSTM, and ARNN, consistently delivered high accuracy with MAE values of approximately 0.154, 0.151, and 0.151, respectively, enhancing the security and efficiency of hydrogen consumption forecasts. The blockchain-based solution offers enhanced security, integrity, and privacy for hydrogen data analysis, thus contributing to the advancement of clean and sustainable energy systems. Additionally, the research identifies existing challenges and outlines potential future directions for further enhancing the proposed system. This study adds to the growing body of research on blockchain applications in the energy sector, with a specific focus on secure hydrogen data analysis and intelligent power management systems.

A reliable Electronic Voting Machine (EVM) is proposed and implemented in this study, which is integrated with a biometric fingerprint scanner to ensure a secure election process. This biometric EVM includes features such as an interactive user interface, hack-free design and master lock. The EVM system has the capability of registering user data and storing them in a database through proper authentication. Moreover, the system proposed lowers the requirement for human resources. This paper provides a detailed description of the systematic development of the hardware and software used. The software part includes algorithm development and implementation. A thorough and in-depth understanding of the data and the communication protocols along with the pathways used for storage of data in the devices is provided. Additionally, the cost of the system is 62.82% less than the officially existing EVM machines of India. Furthermore, this study seeks to demonstrate the benefits of such an approach from a technological and a social standpoint.

OSI model used to be common network model for years. In the case of ad hoc networks with dynamic topology and difficult radio communications conditions, gradual departure is happening from the classical kind of OSI network model with a clear delineation of layers (physical, channel, network, transport, application) to the cross-layer approach. The layers of the network model in ad hoc networks strongly influence each other. Thus, the cross-layer approach can improve the performance of an ad hoc network by jointly developing protocols using interaction and collaborative optimisation of multiple layers. The existing cross-layer methods classification is too complicated, because it’s based on the whole manifold of network model layers combinations, regardless their importance. In this work, we review ad hoc networks cross-layer methods, propose the new useful classification of cross-layer methods, and show future research directions in ad hoc networks cross-layer methods development. The proposed classification can help to simplify the goal-oriented cross-layer protocol development.

A 9,10-phenanthrenequinone (PQ) was electrochemically polymerized on a graphite rod electrode using potential cycling. The electrode modified by poly-9,10-phenanthrenequinone (poly-PQ) was studied by means of cyclic voltammetry, electrochemical impedance spectroscopy, atomic force microscopy and scanning electron microscopy. The poly-PQ shows variations in growth pattern depending on the number of potential cycles for the initiation of polymerization. Formed poly-PQ layer demonstrates good electric conductivity, great electrochemical capacitance and unique oxidation/reduction properties, which are suitable for broad technological applications, including applicability in biosensors, supercapacitors, and in some other electrochemical systems.

A temperature-modulated pyroelectricity measurement system for a small single crystal is developed and applied to standard sample measurements performed on a thin single crystal of lithium niobate. The modulation measurement is based on the AC technique, in which the temperature of the sample is periodically oscillated, and the synchronized pyroelectric signal is extracted using a lock-in amplifier. Temperature modulation is applied by irradiating periodic light on the sample placed in the heat exchange gas. To apply this technique to the transparent reference sample, a commercially available black resin is coated on the sample’s surface to absorb the light energy and transmits it to the specimen. The experimental results are analyzed using a two-layer heat transfer model to verify the effect of the light-absorbing layer as well as the non-contact temperature modulation system.

In the quest for robust and efficient digital communication, this paper introduces cutting-edge key exchange protocols leveraging tropical semirings’ computational prowess and block matrices’ structural resilience. Moving away from the conventional use of finite fields, these protocols deliver markedly faster processing speeds and heightened security. We present two implementations of our concept, each utilizing a different platform for the set of commuting matrices: one employing tropical polynomials of matrices and the other employing Linde-de la Puente matrices. The inherent simplicity of tropical semirings leads to a decrease in operational complexity, and using block matrices enhances our protocols’ security profile. The security of these protocols relies on the Matrix Decomposition Problem. We also provide a comparative analysis of our protocols against existing matrix block-based protocols in finite fields. This research marks a significant shift in cryptographic protocol design, specifically tailored for demanding engineering applications, and sets a new standard in secure and efficient digital communication.

Carburizing of stainless steels at low temperatures (below 500°C) develops a high content carbon layer, known for its high hardness. X-ray Diffraction investigation indicates that carburization treatment does not impact the structure of substrate; however, introduced carbon causes expansion in the carburized layer through the increase in d-spacing. Characterization of carbon concentration and hardness profiles indicate that carbon content gradually decreases while moving further into the substrate; and the origin of the increased hardness of the expanded layer arises from the super-saturated carbon content, following the solid solution strengthening theory. An area that is not well understood is in regard to the carburized layer’s relation to the substrate and the significance in their differences. Using two grades of stainless steel, AISI 316L and PH 17-4, it was observed that the carburized layer is not a separate layer, but a higher carbon content version of the substrate,

Introduction: Migraine is one of the most prominent headache disorders with a global burden of over one billion patients and presented as a disabling and painful disorder. Pathophysiological mechanism of migraine is not fully understood, but the most accepted theory suggests that migraine is caused primarily by neural dysfunction leading to secondary changes in cerebral perfusion. Methods: Authors conducted a case-control study in 175 patients; 88 of them were migraineurs and 87 health controls. Optical coherence tomography (OCT) was performed in all patients using spectral-domain OCT device in the same environmental conditions. All participants met both inclusion and exclusion criteria in order to achieve more homogeneous groups. OCT was performed to scan all retinal layers with an emphasis on the inner plexiform layer (IPL). Results: Among 175 examined subjects, 84% of them were women and in the group of migraineurs we found 56% without aura and 44 % with aura. After collecting tomography data authors did not find subjects in which changes of IPL were found. Nevertheless, only moderate differences in the IPL thickness in all quadrants except the central area were found in the group of migraineurs with aura using Pearson’s test. Conclusion: According to presented results, no significant changes of the IPL thickness in migraine patients were found. Authors have to emphasize the need for further investigation of the relationship between average migraine headache days per month and the thickness of the IPL.

The design and engineering of antibacterial materials is key for preventing bacterial adherence and proliferation in biomedical and house-hold instruments. Silver nanoparticles (AgNPs) and chitosan (CHI) are broad-spectrum antibacterial materials with different properties, whose combined application is currently under optimization. This study proposes the formation of antibacterial films with AgNPs embedded in carboxymethylcellulose/chitosan multilayers by the layer-by-layer (LbL) method. The films were deposited onto nanoporous silicon (nPSi), an ideal platform for bioengineering applications, due to its biocompatibility, biodegradability, and bioresorbability. We focus on two alternative multilayer deposition processes: cyclic dip coating (CDC) and cyclic spin coating (CSC). The physicochemical properties of the films were the subject of microscopic, microstructural and surface-interface analyses. The antibacterial activity of each film was investigated against Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive) bacteria strains as model microorganisms. According to the findings, CDC technique produced multilayer films with higher antibacterial activity for both bacteria compared to the CSC method. Bacteria adhesion inhibition was observed from only 3 cycles. The developed AgNPs-multilayer composite film offers advantageous antibacterial properties for biomedical applications.

Flexible polymer-based dye-sensitized solar cells (DSSCs) offer promising potential for lightweight, cost-effective and versatile photovoltaic applications. However, the critical challenge in their widespread applications is the weak thermal stability of the majority of polymeric substrates, which can only withstand a maximum temperature processing of 150°C. In this study, we propose a facile and low-cost strategy to develop at low temperature DSSC flexible photoanode based on a polymeric matrix. Highly porous nanocomposites fibrous mats composed of polyethylene terephthalate (PET) and titanium dioxide (TiO2) nanobars were prepared through electrospinning process using different configurations (uniaxial electrospinning, coaxial electrospinning, and electrospray-assisted electrospinning). These techniques enabled precise control of the microstructure and the positioning of TiO2 within the composite nanofibers. Therefore, the as-produced photoanodes were loaded with N719 dye and tested in DSSC prototype using iodide-triiodide electrolyte and platinum (Pt) coated counter electrode. The results show that incorporating TiO2 on the fiber surface through the electrospray-assisted electrospinning enhanced the performance of the nanofiber composite, leading to improved dye loading capacity, electron transfer efficiency and photovoltaic performance.

Using co-precipitation to synthesize (CeO2)0.95(Y2O3)0.05 (YDC) and solid reaction method to synthesize (CeO2)0.75(ZrO2)0.25 (ZDC), and the characterization for both crystal structure and micro-structure of the two materials was conducted with X-ray diffraction (XRD) and scanning electron microscope (SEM) methods. Prepare the YDC and ZDC based limited current O2 sensor by employing platinum pasting bonding method. Sensing characteristics of the sensor were obtained at different conditions and study on the impact of temperature, O2 concentration as well as water vapor pressure on the sensing characteristics had been conducted. XRD results show that the phase structure of both YDC and ZDC is cubic phase. SEM results show that both YDC and ZDC layers are dense layers, which are then qualified to be the composition materials of the sensor. This limited current O2 sensor shows good sensing performance and conforms to the Knudsen model. Log(IL•T) depends linearly on 1000/T with R2 of 0.9904, IL depends linearly on x(O2) with R2 of 0.9726 and sensing characteristics are not affected by p(H2O).

In the future, smart cities will provide key services including seamless communication, intelligent transport systems, advanced healthcare platforms, urban and infrastructure management, and digital services for local and regional government. Therefore, a new service and networking paradigm, called the Intelligent Edge Environment, has been specified. and is known as the Intelligent Edge Environment. As a key part of this system, a new secure service ecosystem must be developed to provide the secure realtime movement of services on different High-Performance Edge Cloud Systems. This paper explores these issues by introducing the following mechanisms: the Resource Allocation Algorithm, the Resource Allocation Secure Protocol and finally the Secure Service Protocols. These systems were integrated into the Basic Capabilities System Library and a multithreaded FUSE client connected to the Service Management Framework. Docker was used as a migration mechanism. A prototype was developed and implemented using a FUSE-Network Memory System in which the Network Memory Server was migrated as users move around. The result shows that this approach was safe and could be used to develop new applications and services for smart cities.

Proxy re-encryption (PRE) is a momentous and widely used cryptographic technique. It enables a proxy to forward ciphertext without the need of decryption. PRE has received significant interest in applications like cloud computing, blockchain, and the Internet of Things. Despite its wide range of uses, PRE has also been subject to new security and privacy regulations. In PKC’19, Cohen $et~al.$~first drew attention to the weakness in PRE's security against chosen-plaintext attacks (CPA) and put up a more stringent security concept known as security against honest re-encryption attacks (HRA). Notably, Cohen provides a beneficial conclusion as well. It is proveded that PRE schemes with re-encryption simulatability property can be elevated from CPA to HRA security. It is also proved that CPA-secure PRE schemes with re-encryption simulatability property can be directly elevated to those satisfying HRA security. However, those PRE schemes with re-encryption simulatability are almost always based on pairings. In this study, to the best of our knowledge, we directly construct HRA-secure PRE with re-encryption simulatability for the first time based on the learning with errors (LWE) assumption, which was widely believed to be quantum-resistant. Based on the re-encryption key generation algorithm and the re-encryption algorithm construction method of the above scheme, we can modify attribute-based conditional proxy re-encryption (AB-CPRE) as well as the corresponding attribute-based proxy re-encryption (AB-PRE) algorithm to make them have re-encryption simulatability properties. Finally, by using this property, We boost the security of AB-CPRE scheme of ESORICS'21 from CPA to HRA and simplify the HRA-security proof for the AB-PRE of ESORICS'21.

P53 is known as the most critical tumor suppressor and is often referred to as the guardian of our genome. More than 40 years after its discovery, we are still struggling to understand all molecular details on how this transcription factor prevents oncogenesis or how to leverage current knowledge about its function to improve cancer treatment. Multiple cues, including DNA-damage or mitotic errors, can lead to the stabilization and nuclear translocation of p53, initiating the expression of multiple target genes. These transcriptional programs may well be cell type and stimulus-specific, as is their outcome that ultimately imposes a barrier to cellular transformation. Cell cycle arrest and cell death are two well-studied consequences of p53 activation, but, while being considered as critical, they do not fully explain the consequences of p53 loss-of-function phenotypes in cancer. Here, we discuss how mitotic errors alert the p53 network and give an overview on multiple ways how p53 can trigger cell death. We argue that a comparative analysis of different types of p53 responses, elicited by different triggers in a time-resolved manner in well-defined model systems is critical to understand cell type specific cell fate induced by p53 upon its activation, in order to resolve the remaining mystery of its tumor suppressive function.

Recently, cloud technology has become popular for smart societies. The Cloud technology has made dynamical network changes by enabling the construction of a logical network without building a physical network. Despite recent research on the cloud, it is necessary to study security functions for the identification of fake VNFs and the encryption of communication between entities. In this paper, we proposed an LW_PKI mechanism that detects a fake VNF and guarantees data security through mutual authentication between VNFs. To evaluate the LW_PKI, we built a MANO environment to test the performance of authentication and key generation for data security. In addition, we applied the artificial intelligence algorithm to detect abnormal behavior by using real attack data in the MANO environment. The LW_PKI guaranteed the reliability of a smart service by enhancing the security of the cloud environment.

The IoT Internet of Things being a promising technology of the future. It is expected to connect billions of devices. The increased communication number is expected to generate data mountain and the data security can be a threat. The devices in the architecture are fundamentally smaller in size and low powered. In general, classical encryption algorithms are computationally expensive and this due to their complexity and needs numerous rounds for encrypting, basically wasting the constrained energy of the gadgets. Less complex algorithm, though, may compromise the desired integrity. In this paper we apply a lightweight encryption algorithm named as Secure IoT (SIT) to a quantized speech image for Secure IoT. It is a 64-bit block cipher and requires 64-bit key to encrypt the data. This quantized speech image is constructed by first quantizing a speech signal and then splitting the quantized signal into frames. Then each of these frames is transposed for obtaining the different columns of this quantized speech image. Simulations result shows the algorithm provides substantial security in just five encryption rounds.

Because most of the recognized causes of superior gluteal nerve (SGN) injury are iatrogenic, detailed knowledge of the anatomy of the SGN is crucial to prevent its injury associated with surgical procedures. This study aims to describe the precise location of SGN or its branches at the greater sciatic foramen, measure the distances of these nervous structures to palpable bony landmarks, and evaluate the possible correlation between these parameters and pelvis size. Twenty human cadaveric hemipelvises were studied. After dissection to expose the SGN or its branches at the greater sciatic foramen, the distances from these nervous structures to the greater trochanter (GT), to the anterior superior iliac spine (ASIS), to the posterior superior iliac spine (PSIS), to the ischial tuberosity (IT), and to the greater sciatic notch were measured. We found that at the greater sciatic foramen the SGN emerges as a common trunk in 75% of hemipelvises, and already divided in its superior and inferior branches in 25% of hemipelvises. When the SGN exits the pelvis as a common trunk, it does so, in most cases, in contact with the bone at the apex of the greater sciatic notch or superior to it. The median distance from the SGN at the greater sciatic notch to the PSIS, ASIS, GT and IT is 7.6 cm, 10.9 cm, 7.5 cm and 10.8 cm, respectively. We found a positive correlation between some of the analyzed parameters and the size of the pelvis. The anatomical data of this study may serve as pivotal guides during orthopedic pelvic surgery, contributing to minimize SNG iatrogenic lesions with significant implications in the patient's quality of life.

Fires are a significant threat to people, property, and environment. One of the requirements for the buildings during fires is ensuring the safe evacuation of persons. The evacuation assessment has usually been based on a comparison of the Required Safe Egress Time (RSET) and the Available Safe Egress Time (ASET). One of the important factors influencing the safe evacuation of persons is smoke, which is an important accompanying phenomenon in the burning of polymers. The smoke layer interface is one basic barrier for effective evacuation. The current calculation technique for assessing the smoke layer interface in the Czech Republic is unsatisfactory. For this reason, a calculation technique CSN has been derived, which has been compared with the selected simple calculation techniques, the zone fire model Consolidated Model of Fire and Smoke Transport (CFAST) and the field type model Fire Dynamics Simulator (FDS). The CSN technique was also compared with a real large-scale experiment. The data were also subjected to statistical evaluation using the root mean square error method (RMSE). The deviations between the NFPA, ISO and CSN calculation techniques, the CFAST and FDS fire models and the implemented experiment ranged from 0.05 to 2.41. The established deviations indicate that the calculation technique CSN will be practically usable.

In recent years, antibacterial coatings have become a significant approach in the global fight against bacterial pathogens. Developments in materials science, chemistry and biochemistry have led to a plethora of materials and chemical compounds that have potential for creating antibacterial coatings. Nonetheless, there has been insufficient consideration given to the analysis of the techniques and technologies used to apply these coatings. Among the various inorganic coating techniques, Atomic Layer Deposition (ALD) is noteworthy. It enables the successful synthesis of high-purity inorganic nanocoatings on surfaces of complex shape and topography, while also providing precise control over their thickness and composition. ALD has various industrial applications, but its practical application in medicine is still limited. In recent years, a substantial number of papers have been published on the suggested implementation of thin films and coatings produced through ALD in medicine, notably those with antibacterial properties. The aim of this paper is to carefully evaluate and analyse the relevant literature on this subject. Simple oxide coatings, including TiO2, ZnO, Fe2O3, MgO, and ZrO2, were examined, as well as coatings containing metal nanoparticles such as Ag, Cu, Pt, and Au, and mixed systems such as TiO2-ZnO, TiO2-ZrO2, ZnO-Al2O3, TiO2-Ag, and ZnO-Ag. Through comparative analysis, we have been able to draw conclusions on the effectiveness of various antibacterial coatings of different compositions, including key characteristics such as thickness, morphology, and crystal structure. ALD has been analysed in its use for developing antibacterial coatings for various applications. Furthermore, assumptions regarding the most promising development areas have been presented.

A solution for the Prandtl-Blasius equation is essential to all kinds of boundary layer problems. This paper revisits this classic problem and presents a general Maple code as its numerical solution. The solutions were obtained from the Maple code, using the Runge-Kutta method. The study also considers convergence radius expanding and an approximate analytic solution is proposed by curve fitting. Similarly, the study resolves some boundary layer related problems and provide relevant Maple codes for these.

Recently Li et al (2019 Nature 572 624) discovered a new type of oxide superconductor Nd_0.8Sr_0.2NiO₂ with T_c = 14 K. To classify superconductivity in this infinite-layer nickelate experimental upper critical field, B_c2(T), and the self-field critical current densities, J_c(sf,T), reported by Li et al (2019 Nature 572 624), are analysed in assumption of s-, d-, and p-wave pairing symmetries and single- and multiple-band superconductivity. Based on deduced the ground-state superconducting energy gap, Δ(0), the London penetration depth, λ(0), the relative jump in electronic specific heat at T_c, ΔC/C, and the ratio of 2Δ(0)/k_BT_c, we conclude that Nd_0.8Sr_0.2NiO₂ is type-II high-κ weak-coupled single-band s-wave superconductor.

In a thin-volume photobioreactor where a concentrated suspension of microalgae is circulated throughout the established spatial irradiance gradient, microalgal cells experience a time-variable irradiance. Deploying this feature is the most convenient way of obtaining the so-called “flashing light” effect, improving biomass production in high irradiance. This work investigates the light flashing features of sloping wavy photobioreactors, a recently proposed type, by introducing and validating a Computational Fluid Dynamics model. Two characteristic flow zones (straight top-bottom stream and local recirculation stream), both effective toward light flashing, have been found and characterised: a recirculation-induced frequency of 3.7 Hz and straight flow-induced frequency of 5.6 Hz were estimated. If the channel slope is increased, the recirculation area becomes less stable while the recirculation frequency is nearly constant with flow rate. The validated CFD model is a mighty tool that could be reliably used to further increase the flashing frequency by optimising the design, the dimensions, the installation and the operational parameters of the sloping wavy photobioreactor.

Mixing layer height (MLH) is a crucial parameter for air quality modelling that is still not routinely measured. Common methods for MLH determination use atmospheric profiles recorded by radiosonde but they suffer from course temporal resolution since balloon launching is only twice a day. Recently cheap ceilometers are gaining popularity in the retrieval of MLH diurnal evolution based on aerosol profiles. This study presents a comparison of a proprietary (Jenoptik) and a free available (STRAT) algorithms to retrieve MLH diurnal cycle. The comparison is accomplished in summer season over urban area and radiosonde data is used to estimate MLHs according to parcel, lapse rate, and Richardson methods (the last algorithm is used as a reference in the study) in addition. It was found that STRAT and Jenoptik give lower MLH than radiosonde with an underestimation of about 150m and 650m respectively. Additionally, STRAT showed reasonable performance in tracking of MLH diurnal evolution. Daily MLH maximum of about 2000m was found in the late afternoon (18-19 LT). In contrast, Jenoptik algorithm showed more weaknesses, mainly attributed to its real-time operation and independent processing of a single profile. At night and during morning transition period, both lidar-based methods showed difficulties as MLH was often in the ceilometer’s incomplete overlapping zone so residual or advected aerosol layers aloft were misleadingly reported as mixing layer (ML).

Building a widely distributed hotspot network is a very tedious task due to its complexity. Providing security, fully distributed network services, and cost-conscious impact are the major challenges behind this goal. To overcome these issues, we have presented a novel distributed hotspot network architecture with five layers that can provide large-scale hotspot coverage as an assimilated result. Our contributions to this new architecture highlight important aspects. First, scalability can be increased by including many Internet-of-Things (IoT) devices with sensors and Wi-Fi and/or LoraWAN connectivity modules. Second, hotspot owners can rent out their hotspots to create a distributed hotspot network in which the hotspots can act as an ordinary data gateway, a full-fledged hotspot miner, and a lightweight hotspot miner to earn crypto tokens as rewards for certain activities. Third, the advantages of Wi-Fi and LoraWAN can be seamlessly leveraged to achieve optimal coverage, higher network security, and suitable data transmission rate for transferring sensor data from IoT devices to remote application servers and users. Fourth, blockchain is used to enhance the decentralized behavior of the architecture presented here by providing immutability and independence from a centralized regulator and making the network architecture more reliable and transparent. The main feature of our paper is the use of the tau-computing paradigm along with hotspots to improve availability, Internet backhaul-agnostic network coverage, and synchronous update capability, and tau-aware leasing to strengthen and improve coverage. We also discuss the key challenges and future roadmap that require further investment and deployment.

Unmanned aerial systems (UASs) create an extensive fighting capability of the developed military forces. Particularly, these systems carrying confidential data are exposed to security attacks. By the wireless’s nature within these networks, they become susceptible to different kinds of attacks, hence, it seems essential to design the appropriate safety mechanism in such networks. The sinkhole attack is one of the most dangerous and threatening attacks amongst types of attack in UAS. A malicious UAV exists in such a threat attacking as a black hole for absorbing all traffic in the network. Mainly, in a Flow-based protocol, the attacker considers the requests on the route, then, it replies to the target UAV such as high quality or the best route towards Gard station. The malicious UAV is able to only insert itself on one occasion between the nodes relating to each other (such as sink node and sensor node), and act for passing packets among them. In this study, the malicious attacks are detected and purged using two stages were. In the first stage, some principles and rules are used to detect black hole, gray hole, and sinkhole attacks. In the second stage, using a smart agent-based strategy negotiation procedure for three steps, a defense mechanism is designed to prevent these attacks. The smart agent is used by reliable neighbors via the negotiation procedure for three steps, hence, the traffic formed by the malicious UAV is not considered. The suggested protocol is called SAUAS. Here, the technique is assessed through extensive simulations performed in the NS-3 environment. Based on the simulation outcomes, it is indicated that the UAS network performance metrics are enhanced based on the packet delivery rate, detection rate, false-negative rate and false-positive rate.

The studies of laminar unsteady boundary layer flows is crucial for understanding laminar-turbulence transition and origins of turbulence. However, the task of finding its solutions poses a significant challenge. In this paper, we propose a novel approach by introducing a similar transformation to convert the 2D unsteady laminar boundary layer equations into a single partial differential equation. By applying this transformation, we are able to obtain the "exact" similarity solutions for the 2D unsteady laminar boundary layer equations, specifically for the case of flat plate boundary flow. Notably, this is the first time that such an exact solution has been obtained. Application of this exact solution is being used to solve Stokes' first problem in 2D boundary layer. Perspectives on the transition fron Rayleigh solution to Blasius solution is provided.

This study introduces an alternative to the existing methods for measuring ocean currents based on a recently developed technology. The SailBuoy is an unmanned surface vehicle powered by wind and solar panels that can navigate autonomously to predefined way-points and record velocity profiles using an integrated downward-looking Acoustic Doppler Profiler (ADCP). Data, collected on two validation campaigns, shows a satisfactory correlation between the SailBuoy current records and traditional observation techniques such as bottom mounted and moored current profilers and moored single-point current meter. While the highest correlations were found in tidal signals, strong current, and calm weather conditions, low current speeds and varying high wave and wind conditions reduced correlation considerably. Filtering out some events with high sea surface roughness associated with high wind and wave conditions may increase the SailBuoy ADCP listening quality and lead to better correlations. Not yet resolved is a systematic offset between the measurements obtained by the SailBuoy and the reference instruments of ± 0.03 m/s. Possible reasons are discussed to be the differences between instruments (various products) as well as changes in background noise levels due to environmental conditions.

Cross-laminated timber (CLT) possesses both good shape stability and the possible two-way force transfer ability due to its crosswise lamination. However, the transverse layers in CLT are prone to rolling shear failure under an out-of-plane load. An innovative multi-layer composite laminated panel (CLP) was developed by combining structural composite lumber (SCL) and dimension lumber to overcome the rolling shear failure while maintaining high mechanical performance and aesthetic appearance of natural wood. The mechanical properties of 5-layer CLP consisted of laminated strand lumber (LSL) and dimension lumber with different layups were evaluated by both static and modal tests. The results showed that the shear resistance, bending stiffness and moment resistance of CLP were up to 143%, 43% and 87% higher than their counterparts of regular CLT, respectively. The failure modes observed in both shear and bending tests indicated that the use of LSL in transverse layers could eliminate the potential rolling shear failure in CLT. With the lamination properties from components tests as inputs, the validity of shear analogy method was assessed by test results. The mechanical properties can be well predicted by shear analogy method except for the bending moment resistance of CLP and CLT with either rolling failure in the cross layer or tension failure in the bottom layer.

In this paper, we introduce a comprehensive solution aimed at enhancing the understanding of three-dimensional atmospheric pollutant dispersion. This innovative solution develops a generalized model that extends previous research and is applicable to all parameterization schemes of the equation, including wind speed profiles and turbulent diffusion coefficients, while incorporating the dry deposition criterion. Our methodology involves subdividing the atmospheric boundary layer into distinct sublayers, which facilitates a detailed examination of pollutant dispersion dynamics. Extensive validation with data from the Hanford experiment has demonstrated the accuracy of this solution in simulating pollutant concentrations. The results exhibit a strong correlation between projected and observed concentrations, underscoring the statistical reliability of our approach. This validation situates the statistical indices of our solution within an acceptable range, confirming its accuracy in predicting atmospheric pollutant dispersion. These findings thus establish our solution as a valid and effective method for studying complex environmental phenomena.