The combination of encryption and digital watermarking technologies is a trend to achieve full lifecycle data protection. Recently, reversible data hiding in encrypted domain (RDHED) has greatly aroused the interests of many scholars. But the fixed order of first encryption and then watermarking makes this kind of algorithms unsuitable to many applications. Commutative encryption and watermarking (CEW) technology realizes the flexible combination of encryption and watermarking, and suits more applications. However, most existing CEW schemes for vector maps are not reversible and unsuitable to high precision maps. To solve this problem, here we propose a commutative encryption and reversible watermarking (CERW) algorithm for vector maps based on virtual coordinates which are uniformly distributed on the number axis. The CERW algorithm consists of virtual interval step based encryption scheme and coordinate difference based reversible watermarking scheme. In the encryption scheme, the map coordinates are moved randomly by multiples of virtual interval step defined as distance between two adjacent virtual coordinates. In the reversible watermarking scheme, difference expansion (DE) technique is used to embed the watermark bit into the coordinate difference computed based on the relative position of a map coordinate in a virtual interval. Since the relative position of a map coordinate in a virtual interval keeps unchanged during the coordinate scrambling encryption process, the watermarking operation and the encryption operation don’t interfere with each other and the commutativity between encryption and watermarking achieves. Results show that: proposed method has high security, high capacity and good invisibility. In addition, the algorithm is not only applicable to polyline and polygon vector data, but also can be applied to sparsely distributed point data which the traditional DE watermarking algorithm often fails to watermark.

South Africa is a water stressed country experiencing mass urbanisation especially towards coastal cities. The country is already enduring the impacts of global warming and climate change with risk of water scarcity in many areas. The risk was evident with Cape Town near encounter with ‘Day Zero’ i.e., the day when water supplies would have been switched off and residents required to queue for daily water rations. The drought exposed the inadequa-cies of the existing water supply system. Paradoxically, in the same drought period, vast amounts of unutilized stormwater that could have augmented water supply run unabated into the ocean through rivers around the city. The study determined that the problem was not necessarily water shortage but lack of adequate water storage. This study investigated the suitability of coastal reservoirs for stormwater harvesting on the over 3000 km South African coastline. The objective was to identify suitable locations for coastal reservoirs. The study un-dertook a systematic process of selecting several candidate locations and eliminating unsuita-ble sites based on international best practice i.e., coastal topography, climate, hydrology, fluvi-al environment, catchment size and river water quality. Nine candidate sites were identified and ranked based on suitability and associated benefits. The identified locations in order of ranking include Knysna River, Berg River, Buffalo River, Kowie River, Thukela River, Orange River, Port of Richards Bay, Port of Durban, and Lourens River. The Knysna site, with a mean annual precipitation of 600 - 800 mm/annum and mean annual runoff of 100 - 500 Mm3/annum, was determined to be the most optimal location.

Visual exploration of complex data helps interpretation, especially in the case of omics data analysis in life sciences and clinical research. Generating and analysing omics data requires bioinformatic skills, while they are interpreted by domain experts, for whom parsing large and complex data structures may be challenging. However, outcomes of visual analytics are often difficult to quantify, which emphasises precision and reproducibility, especially for research on human diseases. Here, we propose a workflow combining a reproducible computational environment with a dedicated visualisation functionality for systems biology diagrams. By linking the Galaxy with the MINERVA Platform, we visualise and explore COVID-19 transcriptomic data to demonstrate the utility of our workflow. Visualised data recapitulate findings of the original publication and offer new insights about the COVID-19 pathology. Our results offer a blueprint for quick prototyping of computational workflows that facilitate communication and exploration of complex data in biomedical research.

The Sustainable Development Center of the University of Brasilia is one of the modernist buildings that make up the Darcy Ribeiro campus. The architectural project contains several recommendations for the execution of the flat roof waterproofing system, as well as details for rainwater runoff and drainage, which reveals a certain concern with watertightness. The research seeks to identify the relationship between the pathological manifestations recognized on the roof and the semicircular shape of the building, assessing the state of conservation through the use of damage maps as an analysis tool. The article is based on a field survey using aerophotogrammetry with a drone, the application of vector drawing software for graphic representation and discussion of the possible causes, agents and mechanisms of degradation at work. The results show the importance of mechanical protection for the good performance of the waterproofing system, as well as the need for correct sizing of expansion joints in order to absorb and relieve the stresses caused by hygrothermal variations. The methodology incorporated proved to be effective and economical in diagnosing and monitoring pathological manifestations, making it possible to plan maintenance actions that extend the useful life and preserve the intrinsic characteristics of building systems.

Managing Water, Energy, and Food (WEF) resources within socio-environmental systems demands innovative strategies that provide decision-makers with actionable insights. This article explores the challenges and potential solutions of employing Focus Maps and choremes as a novel approach for assessing anthropogenic impacts and enhancing the visualization of the WEF Nexus in specific geographic areas. By integrating geospatial data, multi-criteria analysis, and involving stakeholders, our research aims to develop Choreomatic Focus Maps (CFMs) that offer a comprehensive spatial representation of the WEF Nexus, facilitating better-informed decision-making at the community level. Our current work outlines visualization of WEF Nexus, as an initial stages of creating CFMs through a detailed step-by-step process. This includes identifying the main drivers for WEF nexus, such as anthropogenic activities and their distribution, evaluating environmental factors, linking anthropogenic impact with environmental indicators over time, and conducting on-site validation. Our focus is on advancing through these crucial steps, particularly emphasizing field validation within the Local Decision-Makers Tools, visualized here by using Focus Maps. This phase is vital for ensuring our approach is grounded in reality and meets the needs of the communities within the Danube Delta region. By doing so, we aim to provide a visual summary of the WEF Nexus that not only captures the complexity of this fragile ecosystem but also incorporates local insights and priorities, identifying key areas where human activities have significant impacts.

This study explores the public library service evaluation domain through user-generated content on Google Maps, highlighting digital feedback's significant yet underexplored potential in understanding public library patronage across Taiwan's six major cities. Utilizing a mixed-methods research design, this study integrates Google Maps review content analysis with Social Network Analysis to delineate public perceptions and identify areas for service enhancement in public libraries. It innovatively leverages personal experiences extracted from over 60,000 Google Maps reviews to evaluate public library services in cities such as Taipei, New Taipei, Taoyuan, Taichung, Tainan, and Kaohsiung. The research taps into the National Library of Taiwan's National Library Statistics System to provide a robust analysis of library performance and user satisfaction, offering a novel perspective by emphasizing user-centric feedback from Google Maps as a primary data source. This approach provides quantitative data on library usage and geographic distribution and enriches our understanding of the qualitative experiences of library users. In analyzing the keywords from Google Maps reviews of public libraries, we categorize and interpret these under the three core LibQUAL+ dimensions—Affect of Service, Information Control, and Library as Place. The findings expose variances in perceived service quality among the cities, with Kaohsiung and Taichung receiving the highest accolades for service satisfaction. Simultaneously, the study identifies potential areas for improvement, particularly in cities with lower satisfaction ratings like Taipei. This personalized feedback illustrates the intimate relationship between public libraries and their communities, offering invaluable insights for policymakers and library management to enhance service delivery and user experience.

Camelina (Camelina sativa L.) is an oilseed with potential for use as a raw material in second-generation biofuels. Camelina has a seed yield of up to 2380 kg ha^-1 and contains around 45% fatty acids. Selection of a suitable site is critical for production optimization. The objective of this study was to determine Chilean agro-climatic suitability for establishing camelina as a productive alternative. Climate and soil requirements and geographical restraints were evaluated for the species, considering the climatological characteristics of its regions of origin, as well as regions where camelina is successfully grown in the rest of the world. The variables considered include factors (maximum temperatures of the warmest month, water deficits, and degree days) and limitations (altitude, geomorphology, and current land use), which permitted the evaluation of the national territory for a certain level of suitability. It was determined that 1.3% of the national territory (960,664 ha) has some degree of suitability for camelina adoption. Between the Biobío and Los Lagos regions, 49.0% of land (471,203 ha) is in the category of without thermic restrictions, with mild water restrictions, and mild soil restrictions or without information, which can be used for camelina production. The Los Ríos region had 21.4% surface area (321,176 ha) with some level of suitability for camelina, the most suitable region to establish this crop in Chile.

Several specific types of generalized maps of a generalized topological space have been defined and investigated for various purposes from time to time in the literature of topological spaces. Our recent research in the field of a new class of generalized maps of a generalized topological space is reported herein as a starting point for more generalized classes.

Distributed/semi-distributed models are considered to be sensitive to the spatial resolution of the data input. In this paper, we take a small catchment in high urbanized Yangtze River Delta, Qinhuai catchment as study area, to analyze the impact of spatial resolution of precipitation and the potential evapotranspiration (PET) on the long-term runoff and flood runoff process. The data source includes the TRMM precipitation data, FEWS download PET data, and the interpolated metrological station data. GIS/RS technique was used to collect and pre-process the geographical, precipitation and PET series, which were then served as the input of CREST (Coupled Routing and Excess Storage) model to simulate the runoff process. The results clearly showed that, the CREST model is applicable to the Qinhuai catchment; the spatial resolution of precipitation had strong influence on the modelled runoff results and the metrological precipitation data cannot be substituted by the TRMM data in small catchment; the CREST model was not sensitive to the spatial resolution of the PET data, while the estimation fourmula of the PET data was correlated with the model quality. This paper focused on the small urbanized catchment, suggesting the influential explanatory variables for the model performance, and providing reliable reference for the study in similar area.

Scientific studies on the impact of wood species on solid fuel production, performance, and sustainability are grossly inadequate. The knowledge of this is imperative as users of solid fuels are increasing rapidly, especially in Africa. On this note, it becomes necessary to explore measures that will improve its efficiency and sustainability as an energy source. This study investigates some properties of selected wood species used as an energy source in Nigeria and their pelleting potential. Nine (9) samples were characterized and assessed for suitability of pelleting following four wood pellet quality standards. The findings revealed Anogeissus leiocarpus as the species with the best rating score in terms of fuel properties while Vitellaria paradoxa as the lowest. However, in terms of conformity with the four wood pellets standards, Khaya senegalensis, Parkia biglobosa and Anogeissus leiocarpus having presented density, calorific value, sulfur, arsenic, cadmium, and lead within the limits of the wood pellet quality standards were considered the best wood species in terms of fuel suitability and pelleting potential. The findings therefore suggest that not all wood species are suitable as fuel. Thus, for species that do not meet the standard wood pellet requirements, alternatives such as the use of biomass blends, additives, or process adjustments can be employed to adapt the quality to the standards or by using the fuels in improved cookstoves.

In recent years, the problem of ecosystem degradation caused by human activities has become increasingly serious. Vegetation restoration is a key means to solve this problem, which has increased. To address the suitability and structural optimization of vegetation restoration in the Loess Plateau, the MaxEnt model was used to quantify the impacts of environmental and human activities on the planting suitability of vegetation restoration species at the raster scale. Three layers of trees, shrubs, and herbs with 12 common vegetation restoration species were selected. The factor index system was constructed by combining climatic, ecological, and socio-economic data, and the MaxEnt model predicted land suitability. It was found that human activities significantly increased the unsuitable planting area. This especially affected Robinia pseudoacacia in the tree layer and Amorpha fruticosa in the shrub layer. Highly suitable and moderately suitable areas were mainly located in sparsely populated areas with close water sources. Through maximum suitability optimization, it was identified that the overall spatial distribution of the three layers in the study area was relatively consistent, and the structural dominance of trees + shrubs + herbs and single herbs in the vertical structure was obvious, which were concentrated in the southwestern and northeastern parts of the study area, respectively. In addition, organic content (OC) and distance from the road to woodland (RW) were the dominant factors affecting land suitability, with a contribution rate of more than 50% and up to 80%. These results provide a scientific basis for optimizing planting structures. They are of significant theoretical and practical significance in guiding vegetation restoration work.

Iterations of continuous maps are the simplest models of generic dynamical systems. In particular, circle maps display several key properties of complex dynamics, such as phase-locking and the quasi-periodicity route to chaos. Our work points out that Planck’s constant may be derived from the scaling behavior of circle maps in the asymptotic limit.

Solid waste management is a major environmental challenge, especially in developing countries, with increasing amounts of waste glass (WG) and waste plastics (WP) not being recycled. In Ethiopia, managing WG and WP requires innovative recycling techniques. This study examines concrete properties with WG and WP as partial replacements for fine aggregate. Tests were conducted on cement setting time, workability, compressive strength, splitting tensile strength, and flexural strength. Concrete grade C-25, with a compressive strength of 25 MPa, was prepared using an optimum ratio of 14% WG and 6% WP. Mechanical properties were tested at 7 and 28 days of curing. At 20% replacement, workability decreased at water-cement ratios of 0.5 and 0.6 but remained stable at 0.4. Thus, a 0.4 ratio was used. For 10% replacement, compressive strength increased by 12.55% and 6.44% on the 7th and 28th days, respectively. At 20% replacement, compressive strength decreased by 14.35% and 0.73% on the 7th and 28th days, respectively. On the 28th day, splitting tensile strength at optimum replacement was 4.3 MPa, an 8.5% reduction from the control mix. However, flexural strength increased by 19.7%, from 12.46 MPa to 15.52 MPa. Overall, WG and WP improved flexural strength but slightly reduced splitting tensile strength.

Oncomelania Hupensis is the exclusive intermediary host of Schistosoma japonicum in China. The alteration of its habitat and population distribution directly affects the safety of millions of individuals residing in the Yangtze River Economic Belt (YREB), and the ecological stability. Therefore, it is crucial to analyse the influence of climate change on the distribution of O. Hupensis in order to achieve accurate control over its population. This study utilised the MaxENT model to forecast possible snail habitats by utilising snail distribution data obtained from historical literature. The subsequent outcomes were achieved: The primary ecological factors influencing the distribution of O. Hupensis are elevation, minimum temperature of coldest month, and precipitation of wettest month; Furthermore, future climate scenarios indicate a decrease in the distribution area and a northward shift of the distribution centre for O. hupensis; Specifically, those in the upstream will move northeast, while those in the midstream and downstream will move northwest; These changes in suitable habitat area, the average migration distance of distribution centers across different climate scenarios, time periods, and sub-basins within the YREB, resulting in uncertainty. This study offers theoretical justification for the prevention and control of O. hupensis along the YREB.

Raindrop erosion is a significant materials limiting issue. It can affect materials for transportation and renewable energy converters such as wind turbines as well as all external structures used in the construction industries. In such cases, the raindrop effects can occur over a wide range of impact velocities and particles sizes. In understanding tribological variable effects, it is useful to study using reference materials. This is because the reference material is well characterized, from previous knowledge of the tribological and corrosion patterns. Further, the well established chemical composition and stochiometry of the corrosion products provide some background understanding of how effectively, during tribological action, the surface scale adheres to the substrate. In this study, a carbon steel was used as a reference to study the effects of velocity and drop diameter in a whirling arm erosion test rig. The results were used to establish the conditions where corrosion was accelerated and the environments where aerodynamic effects may have resulted in droplets being deflected the surfaces. Erosion maps were generated to illustrate such mechanisms based on the results.

Memristors were proposed in the early ’70s of the XXth century by Leon Chua as a new electrical element linking the charge and the flux. Since that first introduction, these devices have positioned themselves to be considered as possibly fundamental for the new generations of electronic devices. It has to be mentioned that actual memristors have only been recognized to exist as physical elements. In this paper, we apply a modeling framework to generate a model describing experimental measurements performed on a ReRAM. We show how to apply the Dynamic Route Map technique in the general case to obtain an approximation to the differential equation that determines the behaviour of the device.

The aim of this research was to select apple varieties suitable for allergy sufferers and diabetics. We first conducted a comprehensive analysis of several apple varieties. The total polyphenol content, sugar content, acidity, and antioxidant activity of the apple fruit juices were determined using spectrophotometric techniques. We also measured the amounts of polyphenols in the apple skins and their antioxidant potential, as well as the allergenic content in the apple juices. The strength of sensitization was assessed using the ELISA method. The lowest amounts of Bet v 1 homologues were found in the varieties Kosztela (4.21 ± 0.71 µg/g), Koksa Pomarańczowa (4.24 ± 0.08 µg/g), and Reneta z Brownlee (4.86 ± 0.18 µg/g). Low values for profilin were observed for Renet Harbert (1.74 ± 0.22 ng/g) and Schieblers Taubenapfel (2.26 ± 0.12 ng/g). The highest values for profilins and Bet v 1 homologues were found in the Złotka Kwidzyńska variety (12.40 µg/g), followed by Malinowa Oberlandzka (9.86 µg/g) and Jakub Lebel (8.87 µg/g). The varieties richest in profilin were Reneta Blenheimska (8.81 ng/g), Szara Reneta (7.88 ng/g), Pepina Ribston (7.67 ng/g), and Reneta z Brownlee (7 .63 ng/g). Given their minimal content of both profilins and Bet v 1 homologues, Koksa Pomarańczowa (4.24 ± 0.08 µg/g Bet v 1 and 4.49 ± 0.82 ng/g profilins) and Książę Albrecht Pruski (5.57 µg/g Bet v 1 and 3.34 ng/g profilins) were identified as suitable for people with allergies. For diabetics, the most suitable apple variety was found to be Jakub Lebel, providing large doses of antioxidants and polyphenols (41.1 ± 2.0 and 5.16 ± 0.42, respectively) and a relatively low sugar content (9.06). Similar results were measured for Kingfish, with 10.2 sugars, 5.68 ± 0.49 antioxi-dants, and 46.2 ± 1.5 polyphenols. The Galowany Pipping variety was found to have a low sugar content (9.71), corresponding to a perceived sweetness of 2.5. Prince Albert of Prussia apples had high antioxidant potential (5.70 ± 0.77) and a low sugar content (11.09). The James Grieve apple variety provided a high polyphenol content of 63.3 ± 1.1 with a high antioxidant level of 5.34 ± 0.45. Grochówka offers a combination of a high polyphenol content (48.6 ± 1.9), a high level of antiox-idant protection (5.50 ± 0.34), and a very low perceived sweetness (from 3.0).

Increases in water temperature caused by climate change will challenge water and species management in the San Francisco Estuary. Our goals were to describe spatial and seasonal patterns in water temperature across the upper Estuary, and evaluate how temperature stress and suitability vary across the aquatic ecosystem. We synthesized 10 years of continuous water temperature data at 75 stations across six regions of the Estuary between 2010 and 2019. We identified stressful temperature thresholds for species of interest using published physiological limits and observed distribution, including ESA-listed native (e.g., osmerids, salmonids), non-ESA-listed native (e.g., cyprinids), non-native (e.g., centrarchids, bivalves), and nuisance species such as invasive aquatic vegetation, and harmful cyanobacteria. We then quantified thermal stress across varying spatial and temporal scales and metrics. Analyses indicated there were detectable regional temperature differences, and that Suisun Bay was the only region to provide regular thermal refuge during the warmer parts of the year, though portions of the Confluence and Suisun Marsh also provided potential thermal refuge during summer/fall and during cooler parts of the day. Meanwhile, the Central and South Delta experienced the warmest temperatures, exceeding thresholds for listed species throughout summer and early fall. We found that listed species such as juvenile salmonids and osmerids experience more thermal stress across a number of metrics. Fishes with higher heat tolerance (including non-natives and select natives), aquatic vegetation, and Microcystis (a harmful cyanobacteria) had the lowest average number of thermal stress days. This study demonstrates that the Estuary is already exhibiting stressful conditions for species of concern, and thermal stress will only increase with climate change. We identify at what times of year and where the Estuary may provide refuge from thermal stress conditions which has important implications for restoration prioritization and design and species management.

Background: Complex bone defects are challenging to treat. Autografting is the gold standard for regenerating bone defects, however limitations include donor site morbidity and increased surgical complexity. Advancements in 3D bioprinting (3DBP) offer a promising alternative for viable bone grafts. Methods: Design of Experiments (DoE) was used to design 12 hydrogel bioinks of various Gelatin meth-acrylate/hydroxyapatite (GelMA/HA) concentrations. These bioinks were assessed for pipettability and equilibrium modulus. An optimal bioink was designed using the DoE data to produce the greatest stiffness while still being pipettable. Two bioinks, the DoE designed maximal stiff-ness and the experimentally defined maximal stiffness vs. a literature based control were then printed using a 3D bioprinter and assessed for print fidelity. The resulting hydrogels were combined with human bone-marrow-derived mesenchymal stromal cells (hMSCs) and evaluated for cell viability. Results: DoE ANOVA analysis indicated that the augmented 3 level factorial design model used was a good fit (p < 0.0001). Using the model, DoE correctly predicted that a composite hydrogel consisting of 12.3% GelMA, 15.7% HA, and 2% Gelatin would produce the maximum equilibrium modulus while still being pipettable. The hydrogel with the most optimal print fidelity was 10% GelMA, 2% HA, and 5% Gelatin. There were no significant differences in cell viability within hydrogels from day 2 to day 7 (p > 0.05). There was however a significantly lower cell viability in the gel composed of 12.3% GelMA, 15.7% HA, and 2% gelatin compared to the other gels with lower HA concentration (p < 0.05), showing that higher HA or print pressure may be cytotoxic within hydrogels. Conclusions: Extrusion-based 3DBP offers significant advantages for bone-tissue implants due to its high customizability. This study demonstrates it is possible to create printable bone-like grafts from GelMA and HA with increased HA levels, favorable mechanical properties (145kPa) and >80% cell viability.

Regulation at the level of translation plays an essential role in modulating gene expression. Given the importance of knowledge about translationally active mRNAs as an indicator of translation efficiency, it is crucial for researchers to have at their disposal organised sources of functional information on translation - plant translatomic maps similar to transcription maps. The development of a general experimental and computational methodology for constructing translatome maps is essential to address this challenge. In this manuscript, we discuss what researchers can do to design plant translatome maps, namely, we review: (i) experimental methods to obtain translationally active mRNA fractions, considering their advantages and limitations; (ii) additional methodological approaches to obtain complete pools of translationally active mRNAs; (iii) sequencing methods to qualitatively and quantitatively assess different mRNA fractions; and (iv) multivariate analyses of sequencing results by bioinformatics methods, including metrics for assessing mRNA translational activity.

Viral pathogens pose a substantial threat to public health and necessitate the development of effective remediation and antiviral strategies. This short communication aimed to investigate the antiviral efficacy of disinfectants on the surface proteins of human pathogenic viruses. Using in silico modeling, ligand binding energies (LBEs) of selected disinfectants were predicted and combined with their environmental impacts and costs through eco-pharmaco-economic analysis (EPEA). Results revealed the binding affinities of chemical disinfectants to viral proteins varied significantly (p

The agricultural soil maps (ASMs) showing the agricultural land of Poland were prepared in 1:5000 scale in 1960s’ and 1970s’. These maps show land suitability group, soil type and soil texture (ST) to a depth of about 150cm. Nowadays, these maps are being digitalized and might be a basis for the preparation of modern soil maps at local, regional, national and international level. The agreement between the ST of topsoil derived from ASMs and recently evaluated for eleven fields located in three voivodeships (regions) of Poland was studied. The study of soil considered the examination of soil profiles or augerings and laboratory analysis of the ST. The agreement between soil status in the field and according to maps was field-specific. Complete agreement (purity) within the field was assessed for 5-79% of ST classes and for 23-100% of agronomic categories (ACs) – a groupings of similar ST classes. However, the averaged agreement, which treated adjacent ST classes as having partial agreement, varied from 37 to 88% for ST classes and from 61 to 100% for the ACs among studied fields. These results indicate on the variable quality of the information shown on the ASMs and on the necessity of improvement of these maps.

The purpose of this study is to assess the solid waste management status and practice in Sendafa town, Oromia regional state residents. In order to achieve this goal, the researcher intends to employ both primary and secondary data from the Sendafa town municipality. With the aid of multi-cluster sampling and a purposive sampling method, the researchers chose a sample size of 398 people and 10 interview responders. To utilize a systematic sampling technique at intervals of residences, individual samples were chosen. Quantitative data was cleaned and analysed using STATA software. A multiple linear regression model and logistic regression other descriptive statistics methods were then used to change the results. The qualitative data were imported, coded, and thematised using ATLAS.ti.9 in order to prepare respondents' interviews for analysis. The findings indicate that residents' poor solid waste management practices are a result of a lack of awareness, low family income transportation issues, issues with waste collectors, a lack of a sense of responsibility and belonging, and a failure to enforce current solid waste management laws. Solid waste accumulates near roads, bridges, and residential areas that are close to landfills, contaminating the area and leading to diseases like TB and Asthma (and other related health issues in children and adults who live there). Thus, researcher recommends that to have sustainable solid waste management the town administrators should have plan to develop awareness creation symposium or panel of discussion, resolve transportation issues, monitor and guide the routine activities of waste collectors, develop sense of belongingness for themselves and for the community, develop integrated solid waste land fill projects and working with all stakeholders like NGO and health institution will minimize the adverse effect of improper solid waste management. Keywords: Solid Waste, Status of Solid Waste Management, Land fill site suitability

Resveratrol is currently considered an option for chemoprevention and treatment of oral cancer, but the instability and unfavorable pharmacokinetics hinder its use in clinical practice. The present study deals with the preparation of resveratrol liposomes by a method that preserves stability and provides payload high enough for chemoprevention and/or treatment of oral cancer. Different temperatures, RSV concentrations and molar fractions, as well as the presence or absence of vitamin C in the hydration media were assayed. Liposome hydrodynamic diameter, polydispersity and zeta potential were evaluated by dynamic light scattering. In vitro biocompatibility, antioxidant activity and permeability were evaluated using TR146 cells and PermeaPad® membranes. Liposomes were included in hydrogels and films, and their suitability for buccal application was evaluated. According to the results, a temperature of 37ºC was optima to efficiently produce the resveratrol liposomes. Vitamin C was found to influence the liposome size, while resveratrol concentration significantly influenced the entrapment efficiency. High cell biocompatibility and potent intracellular antioxidant activity were observed and the inclusion of vitamin C reinforced the antioxidant effects. High permeation across PermeaPad® membranes and efficient uptake by TR146 cells was proved for resveratrol loaded liposomes. Liposomal hydrogels and films appropriated for buccal application were obtained and the payload of the formulations was high enough to produce mucosa concentrations above resveratrol IC50 values reported for cancer cells.

A sufficient amount of tissue sample is required to perform next-generation sequencing (NGS) with a high success rate, but the majority of patients with advanced non-small-cell lung cancer (NSCLC) are diagnosed with small biopsy specimens. Biopsy samples were collected from 184 patients with bronchoscopically diagnosed NSCLC. The tissue surface area, tumor cell count, and tumor content rate of each biopsy sample were evaluated. The impact of the cut-off criteria for the tissue surface area (≥ 1 mm2) and tumor content rate (≥ 30%) on the success rate of Oncomine Dx Target Test (ODxTT) was evaluated. The mean tissue surface area of the transbronchial biopsies was 1.23 ± 0.85 mm2 when small endobronchial ultrasonography with a guide sheath (EBUS-GS) was used, 2.16 ± 1.49 mm2 with large EBUS-GS, and 1.81 ± 0.75 mm2 with endobronchial biopsy (EBB). The proportion of samples with a tissue surface area of ≥ 1 mm2 was 48.8% for small EBUS-GS, 79.2% for large EBUS-GS, and 78.6% for EBB. Sixty-nine patients underwent ODxTT. The success rate of DNA sequencing was 84.1% and that of RNA sequencing was 92.7% over all patients. The success rate of DNA (RNA) sequencing was 57.1% (71.4%) for small EBUS-GS (n = 14), 93.4% (96.9%) for large EBUS-GS (n = 32), 62.5% (100%) for EBB (n = 8), and 100% (100%) for endobronchial ultrasound-guided transbronchial needle aspiration (EBUS-TBNA) (n = 15). Regardless of the device used, a tissue surface area of ≥ 1 mm2 is adequate for samples to be tested with NGS.

It is well known that the major constrain to the efficiency of photovoltaic (PV) devices comes from the generation of unused heat. In this context, thermoelectric generators have been proposed as a viable heat recovery solution, leading to an increase of the overall efficiency. Within this kind of hybrid solutions, the PV and TEG parts can be either electrically separated or connected in the same circuit. In the second case, the presence of the TEG in series to the PV cell can lead to electrical losses. In this work we analyze the effect of various parameters on the output power of electrically hybridized HTEPV systems by means of both electrical measurements and simulations. The results reveal that while electrical lossless condition exists (as also reported in previous work) it not always corresponds to significant power gains respect with the sole PV case. In addition, the strong temperature sensitivity of the lossless condition makes the electrical hybridization hardly practically implementable. This sensitivity in the framework of an actual application scenario, where the solar radiation is variable over time, would make the system working often in a suboptimal regime. The present study gives a new understanding on the actual applicability of electrically hybridized HTEPV devices.

Cosmic strings can arise from spontaneous phase transitions during the inflationary period and are describable as disclination topological defects in spacetime. Analytical integration of the geodesic equations for a particle around a cosmic string reveals distinct orbit patterns dependent on the disclination intensity $\beta_{0}$. After its interaction with the cosmic string, the particle's behavior becomes random. To categorize these patterns, we describe the geodesic motion as iterated maps of a discrete parameter. Through the stabilization values of these functions, we correlate the scattering angle and the number of loops for the particle with $\beta_{0}$. Therefore, we interpret the gravitational field mathematically as an instructor of a particle's next position, given its previous one. We find that the radial function in the small displacement limit is similar to the logistic map. This leads us to conjecture the potential of the discrete parameter being a multiple of Planck's time, suggesting a method for the geometric discretization of spacetime around a cosmic string.

In this paper a novel and flexible solution for fault prediction based on data collected from Supervisory Control and Data Acquisition (SCADA) system is presented. Generic fault/status prediction is offered by means of a data driven approach based on a self-organizing map (SOM)and the definition of an original Key Performance Indicator (KPI). The model has been assessed on a park of three photovoltaic (PV) plants with installed capacity up to 10 MW, and on more than sixty inverter modules of three different technology brands. The results indicate that the proposed method is effective in predicting incipient generic faults in average up to 7 days in advance with true positives rate up to 95%. The model is easily deployable for on-line monitoring of anomalies on new PV plants and technologies, requiring only the availability of historical SCADA data, fault taxonomy and inverter electrical datasheet.

The cost to train a basic qualified U.S. Navy fighter aircraft pilot is nearly $10M. The training includes primary, intermediate, and advanced stages, with the advanced stage involving extensive flight training and being very expensive as a result. Despite the screening tests in place and early-stage attrition taking place, 4.5% of aviators undergo attrition in this most expensive stage. Key reasons for aviator attrition include poor flight scores, voluntary withdrawals, and medical causes. Reduction in late-stage attrition offers several financial and operational benefits to the U.S. Navy. To that end, this research leverages feature extraction and machine-learning techniques on the very sparse flight test grades of student aviators to identify those with a high risk of attrition early in training. Using about 10 years of historical U.S. Navy pilot training data, trained models accurately predicted 50% of attrition with a 4% false positive rate. Such models could help the U.S. Navy save nearly $20M a year in attrition costs. In addition, machine-learning models were trained that can recommend a suitable training aircraft type for each student aviator. These capabilities could help better answer the need for pilots and reduce the time and cost to train them.

Considering citizens' perceptions of their living environment is very helpful in making the right decisions for city planners who intend to build a sustainable society. Mental map analyses are widely used in understanding the level of perception of individuals regarding the surrounding environment. The present study introduces Aram Mental Map Analyzer (AMMA), an open-source program, which allows researchers to use special features and new analytical methods to receive outputs in numerical data and analytical maps with greater accuracy and speed. AMMA performance is contingent upon two principles of accuracy and complexity, the accuracy of the program is measured by Accuracy Placed Landmarks (APL) and General Orientation (GO), which respectively analyses the landmark placement accuracy and the main route mapping accuracy. Also, the complexity section is examined through two analyses Cell Percentage (CP) and General Structure (GS), which calculates the complexity of citizens’ perception of space based on the criteria derived from previous studies. AMMA examines all the dimensions and features of the graphic maps, and its outputs have a wide range of valid and differentiated information, which is tailored to the research and information subject matter that is required.

The Genji firefly is a key symbol of the conservation and management of rural environments. The species lives underwater as larvae, in the soil when they pupate, and emerges on the ground as adults. Because of the large differences in habitat conditions between larvae and adults, the habitat requirements of the Genji firefly must be clarified over a wide range, from the instream to the surrounding riparian environment. In this study, we built a habitat suitability model for the Genji firefly by relating local landscape features to the number of individuals surveyed in a small river in an agricultural watershed. For habitat suitability modelling, tree-based machine learning methods, namely Random Forests (RF) and classification and regression trees (CART), are used to model species distributions and extract quantitative information on their ecological characteristics. Because the model performance on the test dataset was poor, we removed noisy absences using model outputs from the RF computation using the entire dataset. As a result, we observed improved model performance, in which there seems to be an optimal level for removing noisy absences. Variable importance and partial dependence plots were then used to visualize the relationship between the local landscape features and habitat suitability of the adult firefly. Detailed information on landscape features extracted using RF and CART is useful for a deeper understanding of the ecology of the Genji fireflies.

Wind energy is one of the most attractive renewable energy sources because of its low operating, maintenance, and production costs as well as its low environmental impact. The goal of this study is to discover the best locations in Bangladesh where wind farms can be built and operated efficiently. This study applied the GIS and AHP methodologies to examine the eight important parameters upon which the suitability of locations is highly dependent. This analysis finds that Bangladesh has large regions appropriate for wind farm installation, with 3718.76 km² and 16631.14 km² classified as "very high" and "high" suitability, respectively. It was also observed that wind speed, land slope, and elevation each had a height-weighted criterion of 32 %, 27 %, and 12 %, respectively, when picking suitable locations. However, the viability of this study in identifying suitable sites has been evaluated based on ROC and AUC techniques and found satisfactory as per AUC value. The knowledge gained from this study will help the sustainable and renewable energy development authority (SREDA), Bangladesh to expedite the renewable energy investment process and will ensure the great certainty. The findings of this research can be considered as baseline information in the wind energy sector.

With the explosion of the generation, transmission and sharing of image data over the Internet and other unsecured networks, the need and significance for the development of novel image encryption algorithms is unprecedented. In this research work, we propose a novel framework for image encryption that is based on two hyperchaotic maps, utilized in conjunction with the single neuron model (SNM). The framework entails three successive stages, where in every stage, a substitution box (S-box) is applied, then XORing with an encryption key is carried out. The S-boxes and the encryption keys are generated from the numerical solutions of the hyperchaotic maps and the SNM. The performance of the proposed framework is gauged through a number of metrics, reflecting superior performance and complete asymmetry between the plain images and their encrypted versions. However, the main advantages of this work are: (1) The attained width of the key space; and (2) The achieved efficiency in software implementation. The superior key space of 2^{2551} is the result of employing the two hyperchaotic maps, while the improved efficiency, resulting in an average encryption rate of 8.54 Mbps, is the result of the utilization of the single neuron model, as well as the employment of optimized parallel processing techniques. In addition, the proposed encryption framework is shown to output encrypted images that pass the NIST SP 800 suite.

The ability to directly look into genome sequences has opened great opportunities in plant breeding. Yet, the assembly of full-length chromosomes remains one of the most difficult problems in modern genomics. Genetic maps are commonly used in de novo genome assembly and are constructed on the basis of a statistical analysis of the number of recombination rather than physical distance in base pairs. This may affect the accuracy of the ordering and orientation of scaffolds within the chromosome, especially in the region of recombination suppression. Here we report the use of Tyr-FISH for validation of genetic and pseudochromosome maps. For probe design we developed a pipeline that is based on selection of a unique sequence with minimal potential fluorescent background arising from non-specific in situ hybridization. In total of 24 unique genes were located on physical chromosomes 2 and 6. The order of markers has been corrected by integration genetic and cytogenetic maps. Tyr-FISH mapping showed that the order of 23.1% (chromosome 2) and 27.3% (chromosome 6) of the tested genes differed between physical chromosomes and pseudochromosomes. Also the position of the mlh1 gene, which was not on the genetic map, was defined on physical chromosome 2. The results suggest the possibility of Tyr-FISH mapping of any gene that may not be neither on the genetic map nor in the assembly. Hence, Tyr-FISH provides valuable information for the improvement of the genome assembly.

Despite the remarkable success of SARS CoV-2 vaccines, the rise of variants, some of which are more resistant to the effects of vaccination, highlights the potential need for additional COVID-19 vaccines. We used the Multiple Antigen Presenting System (MAPS) technology, in which proteins are presented on a polysaccharide polymer to induce antibody, Th1, Th17 and CD8+ T cell responses, to engineer a novel vaccine targeting SARS CoV-2. This vaccine contains a fragment of the spike (S) protein receptor-binding domain (RBD) sequence of the original D614G strain and was used to immunize nonhuman primates (NHP) for assessment of immunological responses and protection against SARS CoV-2 challenge. The SARS CoV-2 MAPS vaccine generated robust neutralizing antibodies as well as Th1, Th17 and cytotoxic CD8 T-cell responses in NHPs. Furthermore, MAPS-immunized NHPs had significantly lower viral loads in the nasopharynx and lung compared to control animals. Taken together, these findings support the use of the MAPS platform to make a SARS CoV-2 vaccine. The nature of the platform also could enable its use for the inclusion of different variants in a single vaccine.

Chaos theory is widely used in the design of Pseudorandom Number Generators (PRNG), which produce number sequences with statistically uniform distributions and random appearance. However, certain methods for implementing chaotic maps can lead to dynamic degradation of the generated number sequences. To solve such problem, we develop a method for generating pseudo-random number sequences based on multiple one-dimensional chaotic maps. In particular, we introduce a Bernoulli chaotic map that utilizes function transformations and constraints on its control parameter, covering complementary regions of the phase space. This approach enables the generation of chaotic number sequences with a wide coverage of phase space, increasing uncertainty in the number sequence generation process. Moreover, by incorporating a scaling factor and a sinusoidal function, we develop a robust chaotic map, referred to as the Sine-Multiple Modified Bernoulli Chaotic Map (SM-MBCM), which ensures a high level of randomness, validated through statistical mechanics analysis tools. Using the SM-MBCM, we propose a Chaotic PRNG (CPRNG) and evaluate its quality through correlation coefficient analysis, key sensitivity tests, statistical and entropy analysis, key space evaluation, linear complexity analysis, and performance tests. Furthermore, we present an FPGA-based implementation scheme that leverages equivalent MBCM variants to optimize the electronic implementation process. Finally, we compare the proposed system with existing designs in terms of throughput and key space.

Geospatial knowledge in massive academic papers can provide knowledge services such as location-based research hotspot analysis, spatio-temporal data aggregation, research results recommendation, etc. However, geospatial knowledge often exists implicitly in literature resources in unstructured form, which is difficult to be directly accessed and mined and utilized for rapid production of massive thematic maps. In this paper, we take the geospatial knowledge of the area studied as an example and introduce its extraction method in detail. An integrated feature template matching and random forest classification algorithm is proposed for accurately identifying research areas from the abstract texts of academic papers and producing thematic maps. Firstly, the precise recognition of geographical names is achieved step by step based on BiLSTM-CRF algorithm and improved heuristic disambiguation method; then, the area studied is extracted by the designed integrated feature recognition template of area studied using random forest classification algorithm, and a fast thematic map is designed for the knowledge of area studied, topic and literature. The experimental results show that the area studied recognition accuracy can reach 97%, the F-value is 96%, and the recall rate reaches 96%, achieving high accuracy and high efficiency of area studied extraction in text. Based on the geospatial knowledge, the thematic map can achieve the effect of fast map formation and accurate expression.

The recent growth of high-resolution spatial data, especially in developing urban environments, is enabling new approaches to civic activism, urban planning and the provision of services necessary for sustainable development. A special area of great potential and urgent need deals with urban expansion through informal settlements (slums). These neighborhoods are too often characterized by a lack of connections, both physical and socioeconomic, with detrimental effects to residents and their cities. Here, we show how a scalable computational approach based on the topological properties of digital maps can identify local infrastructural deficits and propose context-appropriate minimal solutions. We analyze 1 terabyte of OpenStreetMap (OSM) crowdsourced data to create worldwide indices of street block accessibility and local cadastral maps and propose infrastructure extensions with a focus on 120 Low and Middle Income Countries (LMIC) in the Global South. We illustrate how the lack of physical accessibility can be identified in detail, how the complexity and costs of solutions can be assessed and how detailed spatial proposals are generated. We discuss how these diagnostics and solutions provide a multiscalar set of new capabilities – from individual neighborhoods to global regions – that can coordinate local community knowledge with political agency, technical capability, and further research.

The urbanisation phenomenon and related cities expansion and transport networks entail preventing the increase of population exposed to environmental pollution. Regarding noise exposure, the Environmental Noise Directive demands on main metropolis to produce noise maps. While based on standard methods, these latter are usually generated by proprietary software and require numerous input data concerning, for example, the buildings, land use, transportation network and traffic. The present work describes an open source implementation of a noise mapping tool fully implemented in a Geographic Information System compliant with the Open Geospatial Consortium standards. This integration makes easier at once the formatting and harvesting of noise model input data, cartographic rendering and output data linkage with population data. An application is given for a French city, which consists in estimating the impact of road traffic-related scenarios in terms of population exposure to noise levels both in relation to a threshold value and level classes.

This research aimed to determine the most viable locations for establishing solar energy facilities in Yemen through the utilization of the Analytical Hierarchy Process (AHP), Best-Worst Method (BWM), and Geographic Information System (GIS). A total of twelve key criteria were meticulously selected and evaluated based on their impact on the appropriateness of sites for solar power plants. These criteria were amalgamated using a weighted overlay tool, resulting in a map that classified regions as either optimal, highly suitable, or suitable. The findings of the study indicated that the eastern, southern, and northern parts of Yemen are prime candidates for solar energy installations due to their moderate climate and flat topography. On the other hand, the western regions were deemed less favorable. The breakdown of site classifications revealed that 38% of areas were optimal, 61% were highly suitable, and only 1% were considered suitable, based on the assigned weights from the AHP and BWM methodologies. Moreover, a sensitivity analysis was carried out to evaluate the impact of adjusting the weights of Global Horizontal Irradiance (GHI) and slope on site classifications. A minor increase in the weights of GHI (from 30% to 31%) and slope (from 10% to 11%) resulted in a significant alteration in the suitability categories, highlighting the importance of weight adjustments in multi-criteria decision-making processes. In conclusion, the study emphasizes the effectiveness of AHP, BWM, and GIS in assessing site suitability for solar energy facilities, as well as the significance of sensitivity analyses. These approaches provide valuable insights for decision-makers, aiding in strategic planning and fostering sustainable energy development in Yemen.

The greater U.S. Midwest is on the leading edge of tick and tick-borne disease (TBD) expansion, with tick and TBD encroachment into Illinois occurring from both the northern and the southern regions. To assess historical and future habitat suitability of four ticks of medical concern within the state, we fit individual and mean-weighted ensemble species distribution models for Ixodes scapularis, Amblyomma americanum, Dermacentor variabilis, and a newly invading species, Amblyomma maculatum using a variety of landscape and mean climate variables for the periods of 1970-2000, 2041-2060, and 2061-2080. Ensemble model projections for the historical climate were consistent with known distributions of each species but predicted the habitat suitability of A. maculatum to be much greater throughout Illinois than what known distributions demonstrate. Presence of forest and wetlands were the most important landcover classes predicting occurrence of all tick species. As the climate warmed, the expected distribution of all species became strongly responsive to precipitation and temperature variables, particularly precipitation of the warmest quarter and mean diurnal range, as well as proximity to forest cover and water sources. The suitable habitat all species was predicted to shrink in the 2050 climate scenario, and then increase more broadly statewide in the 2070 scenario, but at reduced likelihoods. Predicting where ticks may invade and concentrate as the climate changes will be important to anticipate, prevent, and treat TBD in Illinois.

Abstract: Spatially explicit, fine-grained datasets describing historical urban extents are rarely available prior to the era of operational remote sensing. However, such data are necessary to better understand long-term urbanization and land development processes and for the assessment of coupled nature-human systems, e.g., the dynamics of the wildland-urban interface. Herein, we propose a framework that jointly uses remote sensing derived human settlement data (i.e., the Global Human Settlement Layer, GHSL) and scanned, georeferenced historical maps to automatically generate historical urban extents for the early 20th century. By applying unsupervised color segmentation to the historical maps, spatially constrained to the urban extents derived from the GHSL, our approach generates historical settlement extents for seamless integration with the multi-temporal GHSL. We apply our method to study areas in countries across four continents, and evaluate our approach for two U.S. study sites against historical settlement extents derived from the Historical Settlement Data Compilation for the US, HISDAC-US, achieving Area-under-the-Curve values >0.9. Our results are largely in agreement with model-based urban areas from the HYDE database, and demonstrate that the integration of remote sensing derived observations and historical cartographic data sources opens up new, promising avenues for assessing urbanization, and long-term land cover change in countries where historical maps are available.

The protection of Geographic Indications (GIs) is part of the intellectual property (IP) rights described in the Agreement on Trade Related Aspects of Intellectual Property Rights (TRIPS) after the Uruguay Round (1986-1994). The members of the World Trade Organisation (WTO), including Mozambique, have adopted it. This country legislated GI under Decree 18/99 (04/05/1999, title II, chapter VI) of the national Industrial Property Code, harmonised with TRIPS. However, there is little information about its enforcement and impact in the industry. This review analyses the possibility of protecting the Mozambican cashew nuts industry under the GI act. The industry, with major participation of smallholders and employing mostly women, produces one of the most profitable export commodities, though it has suffered colossal losses over the last thirty-five years. The analysis has shown that it is suitable and probably advantageous to protect the cashew nuts under the Decree 18/99. On the other hand, other local trade policies from 1991 are negatively impacting the entire industry and these might create the illusion of inefficacy of the new IP rights including the protection of GIs.

In this paper, we propose a method for assessing the effectiveness of entropy features using several chaotic mappings. We anlyze fuzzy entropy (FuzzyEn) and neural network entropy (NNetEn) on four discrete mappings: the logistic map, the sine map, the Planck map, and the two-memristor-based map, with a base length time series of 300 elements. FuzzyEn is shown to have improved global efficiency (GEFMCC) in the classification task compared to NNetEn. At the same time, there are local areas of the time series dynamics in which the classification efficiency NNetEn is higher than FuzzyEn. The results of using horizontal visibility graphs (HVG) instead of the raw time series are also shown. GEFMCC decreases after HVG time series transformation, but there are local areas of the time series dynamics in which the classification efficiency increases after including the HVG. The scientific community can use the results to explore the efficiency of entropy-based classification of time series.

This is break direction on oxygen sources and conveyance methodologies for COVID-19 treatment. It has been adjusted from WHO and UNICEF's specialized details and direction for oxygen treatment gadgets, which is important for the WHO clinical gadget specialized arrangement, 1 and depends on current information on the circumstance in China and different nations where cases have been distinguished. This direction is proposed for wellbeing office chairmen, clinical leaders, acquisition officials, arranging officials, biomedical architects, foundation engineers and strategy producers. It portrays how to: measure oxygen interest, to distinguish oxygen sources that are accessible, and select suitable flood sources to best react to COVID-19 patients' requirements, particularly in low-and-center pay nations. WHO will refresh these suggestions as new data opens up. Coronavirus pandemic spurred fake interest for oxygen gas chambers for clinical use - both at emergency clinics and inquisitively, for home use by patients. A few patients and surprisingly sound people investigate the conceivable outcomes and likely benefits of utilizing oxygen from chambers for private utilization. Be that as it may, this isn't continuously protected, and sufficient safety measures are to be taken, bombing which there can be fatalities. This paper investigates the significance of keeping up satisfactory degrees of oxygen levels appropriate for human utilization. It advises the clinical use and the advantages and disadvantages of putting away oxygen chambers at home. The investigation likewise addresses lawful and administrative perspectives. The investigation's discoveries can help people settle on an educated choice on the protected use regarding oxygen gas. Further, it cautions on the expanded significance of guidelines and limiting access and use. This paper aims at designing an oxygen level monitoring technique in an oxygen cylinder. The amount of oxygen present inside the oxygen cylinder is very vital information when such cylinder is in use for supply of oxygen to a critical patient. The amount of oxygen present inside the cylinder is measured by the pressure at the outlet nozzle. The pressure is measured using a high precision MEMS Pressure Sensor. The output of the MEMS pressure sensor is voltage of the order milli. An amplifier is used to amplify this milli volt signal. A microcontroller is used in cascade to process the signal and display the pressure of oxygen cylinder.

Job satisfaction has a strong impact on the intention to stay which is an important aspect to counter skills shortage in academic medicine. In an interview study combining qualitative and quantitative methods we investigated how the mental representation of working conditions influences job satisfaction and its impact on the intention to stay. In a first study chief physicians participated in interviews about job satisfaction in academic hospitals. Answers were segmented into statements, ordered by topics and rated according to their valence. In a second study assistant physicians (residents) during and after their training period talked about strength, weaknesses and potential improvements of working conditions. Again, answers were segmented, ordered, rated and used to develop a ‘job satisfaction scale’. In a third study, assistant physicians participated in a computer-led repertory grid procedure composing ‘mental maps’ of job satisfaction factors, filled in the job satisfaction scale and rated if they would recommend work and training in their clinic as well as their intention to stay. Comparing the interview results with recommendation rates and intention to stay show that a negative attitude is linked to high workload and poor career perspectives. A positive attitude towards work environment and high intention to stay are linked to sufficient personnel and technical capacities, reliable duty scheduling and fair salaries. The third study using repertory grids showed that the perception of current teamwork and future developments concerning work environment were the main aspects to improve job satisfaction and the intention to stay. The results of the interview studies were used to develop an array of adaptive improvement measure. The results support prior findings that job dissatisfaction is mostly based on generally known “hygiene factors” and whereas job satisfaction is due to individual aspects.

Historical maps possess significant theoretical and practical value in fields such as historical geography and urban planning, making them essential tools for studying urban spatial structure. This study explores the evolution of Xi'an's urban spatial structure from the Five Dynasties (909 CE) to the late PRC period (1949 CE), using historical maps and Historical GIS (HGIS) methodologies. By integrating Space Syntax and Kernel Density Estimation (KDE) with data from The Historical Atlas of Xi'an, this research identifies key trends in the city's spatial transformation. Two distinct phases of development were observed: the simpler, centralized structure during the Five Dynasties, Northern Song, and Yuan periods, and a more complex, decentralized structure during the Ming, Qing, and PRC periods. These changes were influenced by a dynamic interplay of political, economic, cultural, and environmental factors, as well as the city's need to adapt to external military threats and internal socio-economic shifts. The study emphasizes the value of HGIS in analyzing urban historical geography and the potential it offers for both understanding past urban dynamics and informing contemporary urban planning and cultural heritage preservation efforts. The findings demonstrate how Xi'an's spatial evolution reflects broader trends in Chinese history and provides insights for future sustainable development.

This study investigates the spatio-temporal variability of the onset, offset, and Length of the rainy season in Senegal over the 1981-2018 period. The onset, offset dates, and length of the rainy season are crucial parameters for agricultural planning in West Africa, which exhibits high interannual and spatial variability in rainfall. The objective is to detect and spatially classify these phenological parameters across Senegal using different approaches. Daily precipitation data from the Climate Hazards group InfraRed Precipitation with Stations (CHIRPS) dataset over the study period and ERA5 reanalysis were used. The method of was applied to detect the onset, offset dates, and length of the rainy season. The Kohonen algorithm was then used to spatially classify these parameters on topological maps. A hierarchical ascendant classification was also performed to reduce the number of classes obtained. Finally, a composite analysis of moisture transport before the onset and end of the 1984 and 2007 seasons was conducted with ERA5 data. The results show a meridional gradient of the start of the season, progressively later from southeast to northwest, while the end follows a north-south gradient. The duration of the rainy season ranges from 45 days in northern Senegal to 150 days in the south. The maximum number of dry days also decreases from north to south. The Kohonen self-organizing maps allow spatial prediction of the onset, end date, and duration of the rainy season across Senegal. The dynamics analysis reveals that early onset years are associated with stronger and earlier northward moisture transport over West Africa, underscoring the role of this parameter in triggering the rainy season. These promising results can provide an early warning to policymakers and farmers on the start and end dates of the season in each area of Senegal.

Conducting computational stress-strain analysis using finite element methods (FEM) is a common approach when dealing with the complex geometries of atherosclerosis, which is a leading cause of global mortality and complex cardiovascular disease. The considerable expense linked to FEM analysis encourages the substitution of FEM with a considerably faster data-driven machine learning (ML) approach. This study investigated the potential of end-to-end deep learning tools as a more effective substitute for FEM in predicting stress-strain fields within 2D cross sections of arterial wall. We first proposed a U-Net based fully convolutional neural network (CNN) to predict the von Mises stress and strain distribution based on the spatial arrangement of calcification within arterial wall cross-sections. Further, we developed a conditional generative adversarial network (cGAN) to enhance, particularly from the perceptual perspective, the prediction accuracy of stress and strain field maps for arterial walls with various calcification quantities and spatial configurations. On top of U-Net and cGAN, we also proposed their ensemble approaches to further improve the prediction accuracy of field maps. Our dataset, consisting of input and output images, was generated by implementing boundary conditions and extracting stress-strain field maps. The trained U-Net models can accurately predict von Mises stress and strain fields, with structural similarity index scores (SSIM) of 0.854 and 0.830 and mean squared errors of 0.017 and 0.018 for stress and strain, respectively, on a reserved test set. Meanwhile, the cGAN models in a combination of ensemble and transfer learning techniques demonstrate high accuracy in predicting von Mises stress and strain fields, as evidenced by SSIM scores of 0.890 for stress and 0.803 for strain. Additionally, mean squared errors of 0.008 for stress and 0.017 for strain further support the model's performance on a designated test set. Overall, this study developed a surrogate model for finite element analysis, which can accurately and efficiently predict stress-strain fields of arterial walls regardless of complex geometries and boundary conditions.

Background: New open-source electric-grid planning models have the potential to improve power system planning and bring a wider range of stakeholders into the planning process for next-generation, high-renewable power systems. However, it has not yet been established whether open-source models perform similarly to the more established commercial models for power system analysis. This reduces their credibility and attractiveness to stakeholders, postponing the benefits they could offer. In this paper, we report the first model intercomparison between an open-source power system model and an established commercial production cost model. Results: We compare the open-source Switch 2.0 to GE Energy Consulting’s Multi Area Production Simulation (MAPS) for production-cost modeling, considering hourly operation under 17 scenarios of renewable energy adoption in Hawaii. We find that after configuring Switch with similar inputs to MAPS, the two models agree closely on hourly and annual production from all power sources. Comparing production gave a coefficient of determination of 0.996 across all energy sources and scenarios, indicating that the two models agree on 99.6% of the variation. For individual energy sources, the coefficient of determination was 69–100. Conclusions: Although some disagreement remains between the two models, this work indicates that Switch is a viable choice for renewable integration modeling, at least for the small power systems considered here. Although some disagreement remains between the two models, this work indicates that Switch is a viable choice for renewable integration modeling, at least for the small power systems considered here.

In recent decades, the cultivation of avocados has expanded throughout the Iberian Peninsula, with most of the production occurring on the southern Atlantic and Mediterranean coast, as well as in the Canary Islands and the north. This expansion is due to high demand and high prices, which have made the crop very attractive. However, climatic suitability criteria have not always been followed, putting sustainability at risk. Avocados originate from tropical and subtropical areas and have very specific climatic requirements that must be met to ensure good production. This study analyzed key climatic variables, including winter cold damage, pollen viability, and flowering and fruit set temperatures. Using daily climate data from 1975 to 2022, advanced spatial analysis techniques were applied to produce suitability maps. The results indicate that the ex-pansion of the crop is possible in certain areas of southern Andalusia, but not in the rest of the peninsula. Minimum winter and March temperatures are the main limiting factors. This work provides valuable insights into the potential for sustainable agricultural intensification, the sus-tainability of agricultural decision-making, and resilience to climate change.

End-of-life electric vehicle (EV) batteries can be reused to reduce their environmental impact and economic costs. However, the growth of a second-life market is limited by the lack of information on the characteristics and performance of these batteries. As the volume of end-of-life EVs may exceed the amount of batteries needed for stationary applications, investigating the possibility of repurposing them in mobile applications is also necessary. This article presents an experimental test that can be used to collect the data necessary to fill a battery passport. The proposed procedure can facilitate the decision making process regarding the suitability of a battery for reuse at the end of its first life. Once the battery passport has been completed, the performance and characteristics of the battery are compared with the requirements of several mobile applications. Mobile charging stations and forklift trucks were identified as relevant applications for the reuse of high capacity prismatic cells. Finally, a definition of a state of health (SoH) is proposed to track the suitability of the battery during use in the second life application considering not only energy but also power and efficiency of the battery. This SoH shows that even taking into account accelerated ageing data, a repurposed battery can have an extended life of 11 years at 25~°C. It has also been shown that energy fade is the most limiting performance for lifetime and that cell-to-cell variation should be tracked as it has been shown to have a significant impact on battery life.

Land suitability analysis is a basic premise for allocating specific land for specific purpose. The objective of this study was to predict the suitable sites for cultivating Moringa oleifera tree in Ethiopia using Spatial Analytic Hierarchy Process. Findings of this study will have paramount significance in supporting decision making in the agroforestry development sector. This study employs Spatial Analytic Hierarchy Process and Geographic Information System to generate valuable information in land allocation for moringa oleifera tree production. Climate, topography, soil type and land use parameters were evaluated for suitability analysis. The results of the study revealed that most of the central part of the country are categorized as moderately suitable for the production of moringa oleifera tree. Areas classified as highly suitable are distributed along the borders of southern and western part of the country. However, some of the central part was classified as not suitable for Moringa oleifera tree production. This paper tried to investigate analysis of spatial data to predict suitable site for moringa tree production at national level. At national level, highly suitable, moderately suitable, and not suitable class covers an area of 308,508.2, 1,628,930.8 and 59891.3 Square Kilometer respectively.

Senegal central regions face rainfall deficit combined with scarcity of surface water and poor quality. Populations use groundwater for drinking and irrigation. A Groundwater assessment studiebased on 42 samples aims to determine their quality. Several parameters (TDS, TH, WQI, SAR, RSC, %N, PI, KR and MR) and ion chemistry determined . Samples exhibit an alcaline pH (7.6) and hydrochemical facies mainly Ca-Na-Mg-HCO3. The ionic dominance is Na+ ˃ Ca2+ ˃ Mg2+ ˃ K+ and HCO3- ˃ Cl- ˃ SO42- ˃ NO3- ˃ F-. From TDS and WQI index most of the groundwaters are suitable for drinking. Irrigation quality (based on SAR, %N, RSC, KR, MR) varie from excellent to good water type. Plotting chemical data (USSL salinity & Wilcox diagrams) reveals that the majority of the groundwater samples belong to the fields excellent to good and from good to permissible . Natural processes (rock weathering, mineral dissolution, evaporation and ion exchange) control groundwater quality. As the region faced a persistent rainfall deficit combine with fragile groundwater quality should alert the stakeholders. A sustainable development of the region can be faced if strong measures are planned to follow water quality evolution and quantity available for human purposes

Background: COVID-19 has impacted Indian engineering institutions (EIs) enormously. It has tightened its knot around EIs that forced their previous half-shut shades completely down to prevent the risk of spreading COVID-19. In such a situation, fetching new enrollments on EI campuses is a difficult and challenging task, as students’ behavior and family preferences have changed drastically due to mental stress and emotions attached to them. Historically, during crisis situations, institutions have struggled to return to the normal track. Consequently, it becomes a prerequisite to examine the choice characteristics influencing the selection of EI during the COVID-19 pandemic to make it ‘normal’ for ‘new’ enrollments. The purpose of this study is to critically examine choice characteristics that affect students’ choice for EI and consequently to explore relationships between institutions’ characteristics and the suitability of EI during the COVID-19 pandemic across students’ characteristics. Quantitative research, conducted through a self-reported survey composed of a closed-ended structured questionnaire, was purposefully incorporated into the students who recently were enrolled in EIs (batch years 2020-2021) belonging to the North Maharashtra region of India. Results:The findings of this study revealed dissimilarities across students’ characteristics regarding the suitability of EIs under pandemic conditions. Regression analysis revealed that EI characteristics such as proximity, image and reputation, quality education and curriculum delivery have significantly contributed to suitability under COVID-19. At the micro level, multiple relationships were noted between EI characteristics and the suitability of EI under the pandemic across students’ characteristics. Conclusion:Bringing ‘normality’ to ‘new’ enrollments totally depends on EI’s resilience in meeting the needs of diversity in the COVID-19 pandemic situation, which repositions themselves to govern student-centric strategies instituted for the overall suitability of EI under pandemic conditions. The study has successfully demonstrated how choice characteristics can be executed to regulate the ‘suitability’ of EI under the COVID-19 pandemic for the inclusion of diversity. It is useful for policy makers and academicians to reposition EIs that fetch diversity during the pandemic. This study is the first to provide insights into the performance of choice characteristics and their relationship with the suitability of EIs under a pandemic and can be a yardstick in administering new enrollments.

Due to the broadening of services from industrial enterprises to customers, the industrial network has gained more significance than what is really thought. As a part of this revolution, this paper tried to introduce the best suitable routing option for the healthcare, banking and internet services industries to optimize the routing department of their enterprises. RIP is not associated with this study, being out of favor in the industries due to hop count limitation. The idea behind doing such a thing is to avoid improper implantation of routing inside the enterprises which causes lack of optimization in routing department. The method which is selected for this paper is qualitative case study of banking, healthcare and internet services industries with unstructured interviews of IT experts of the respected industries in an open-ended questions fashion. The results were illustrated based on the stories and the discussion of the stories is the main contributor to the result of the study. The evaluation results of the stories have illustrated, that EIGRP is a suitable routing option for health care and banking, while OSPF can be suitable for the internet services industry. The implication of the study can be optimized network of industries such as healthcare, banking and internet services and it introduces the best suitable routing option for the demanded industries with the case study method and narrative analysis of the stories, which start from load balancing type and ends to demanded routing protocol, while reaching to demanded routing protocol, it introduces the best suitable routing option of that industry

The development of an equipment starts from an effective design activity. The concept selection process is an activity that is entailed in the design stage and its relevance in the design process cannot be overemphasized because it informs the choice of optimal conceptual design from a set of alternative design. Hence, there is a need to accrue efforts to the concept selection process because of its importance. This article presents the identification of optimal conceptual design as a Multicriteria decision making model by assessing the suitability of Fuzzy Measurement Alternatives and Ranking according to COmpromise Solution (MARCOS). The Fuzzy MARCOS model was developed to access four alternative conceptual designs of briquetting machines considering eight design features with several sub features. The fuzzy MARCOS model was able to rank the conceptual designs and the results obtained from the decision analysis showed that the Fuzzy MARCOS model was able to rank the designs based on their performance and the final values of the overall utility function. The overall utility function is a based on the utility degree of the conceptual design alternatives in terms of the best and worst designs identified by the model. The utility degree created a platform for comparison on how the design alternatives varies from the best and worst design.

Research Infrastructures (RIs) are essential to achieve excellence in innovative scientific research. However, because of limited land availability and specific geological requirements, evaluating the viability of a site for a new RI can be a challenging task. Stringent safety construction requirements include developing site-specific architectural and geoengineering solutions, minimizing construction disturbances, and reinforcing rock and soil in a timely fashion. For successful development of the RIs in China, such as the Daya Bay Neutrino Laboratory (DBNL), and the China Spallation Neutron Source (CSNS), an integrated approach of joint geophysical methods including the electrical resistivity tomography (ERT), controlled-source audio-frequency magneto telluric (CSAMT)), gravity and seismic refraction methods, and geological mapping and surveys were carried out. Geophysical parameters, such as electrical resistivity, density, and seismic velocity show inverse proportion to the degree of rock fracturing or weathering. The results show that the low values of geophysical parameters suggest the weathered/fractured rock, while high values reveal the fresh bedrock. The Engineering Geological Suitability Index (EGSI) value can represent the individual EGSI values at a constant and summed over varying depths. EGSI methodology is an improvement on the existing siting process, and has been applied this to CSNS. Our integrated approach provides clearer insight of the subsurface for site suitability of RIs in challenging engineering geological conditions, and removes any ambiguity caused by a single geophysical parameter. The obtained geological knowledge of the area not only provides engineers with much-needed information about the construction conditions of a potential site, but also gives scientists the opportunity to explore the local geology. In this study, we demonstrate our innovative approach for siting RIs, as demonstrated by the synthetic evaluation of the site location and utilization for two established RIs (DBNL and CSNS).

The Sentinel-1 SAR Extra Wide swath mode with its 40 meters pixel size allows accurate lead mapping in Arctic sea ice areas. We present an improved winter lead detection algorithm based on a modified U-Net convolutional neural network. We introduce a preprocessing procedure that balances normalized radar cross section (NRCS) values between sub-swaths. This results in more consistent Sentinel-1 SAR images as input for the classifier, which is especially important for the cross-polarization HV channel. In turn, image consistency is essential for automatic image semantic segmentation. We develop a new lead detection algorithm and compare it with a previously published version. We produce pan-Arctic, 40 meters resolution lead maps and present pan-Arctic lead area fraction on a 12 km grid for January 2019. Within different Arctic regions, the lead area fraction is stable and varies only within the expected natural variability during the one month studied here. The average Arctic-wide lead area fraction is 2.44 % with 0.25 % standard deviation during January 2019. The improved lead detection algorithm leads to a better lead discrimination and extends the applicability area to the entire Arctic.

This paper introduces a novel algorithm for solving the point-to-point shortest path problem in a static regular 8-neighbor connectivity (G8) grid. This algorithm can be seen as a generalization of Hadlock algorithm to G8 grids, and is shown to be theoretically equivalent to the relaxed A* (RA*) algorithm in terms of the provided solution's path length, but with substantial time and memory savings, due to a completely different computation strategy, based on defining a set of lookup matrices. Through an experimental study on grid maps of various types and sizes (1290 runs on 43 maps), it is proven to be 2.25 times faster than RA* and 17 times faster than the original A*, in average. Moreover, it is more memory-efficient, since it does not need to store a G score matrix.

Research on Traffic Light Recognition (TLR) has grown in recent years, primarily driven by the growing interest in autonomous vehicles development. Machine Learning algorithms have been widely used to that purpose. Mainstream approaches, however, require large amount of data to properly work, and as a consequence, a lot of computational resources. In this paper we propose the use of Expert Instruction (IE) as a mechanism to reduce the amount of data required to provide accurate ML models for TLR. Given an image of the exterior scene taken from the inside of the vehicle, we stand the hypothesis that the picture of a traffic light is more likely to appear in the central and upper regions of the image. Frequency Maps of traffic light location were thus constructed to confirm this hypothesis. The frequency maps are the result of a manual effort of human experts in annotating each image with the coordinates of the region where the traffic light appears. Results show that EI increased the accuracy obtained by the classification algorithm in two different image datasets by at least 15%. Evaluation rates achieved by the inclusion of EI were also higher in further experiments, including traffic light detection followed by classification by the trained algorithm. The inclusion of EI in the PCANet achieved a precision of 83% and recall of 73% against 75.3% and 51.1%, respectively, of its counterpart. We finally presents a prototype of a TLR Device with that expert model embedded to assist drivers. The TLR uses a smartphone as a camera and processing unit. To show the feasibility of the apparatus, a dataset was obtained in real time usage and tested in an Adaptive Background Suppression Filter (AdaBSF) and Support Vector Machines (SVMs) algorithm to detect and recognize traffic lights. Results show precision of 100% and recall of 65%.

In this study, we used the natural and anthropogenic characteristics of a coastal region to generate risk maps showing vulnerability and potential hazards, and proposed design criteria for coastal defense and land use for the various kinds of risks faced. The Yunlin coast: a first-level protection area in mid-west Taiwan, was then used as an example to illustrate the proposed design criteria. The safety of the present coastal defenses and land use of the Yunlin coastal area was assessed, and coastal protection measures for hazard prevention were proposed based on the generated risk map. The results can be informative for future coastal management and the promotion of sustainable development of coastal zones.

The reduction of biodiversity loss is one of the targets of the 2030 Agenda for Sustainable Development. The protection of endangered species is critical for conserving global biodiversity. Asian elephants，as one of the last few mega-herbivores on Earth, are currently threatened by climate changes and anthropogenic modifications. The modelling of their living habitats is of top priority to the conservation of Asian elephant. In this study, we used the maximum entropy model (MaxEnt) to identify the current and potential future habitats of Asian elephants in South and Southeast Asia. We performed analyses for future projections with 17 scenarios by using the present results as baseline. To optimise the modelling results, we delineated the core habitats by using the Core Mapper Tool and compared them with existing protected areas (PAs) through gap analysis. The results showed that the current total area of core habitats is 491,455 km2 in size and will be reduced to 332,544 km2 by 2090 under SSP585 (the shared socioeconomic pathway). The projection analysis under differential scenarios suggested that most of the core habitats in the current protected areas would remain stable and suitable for elephants in the future. However, the remaining 75.17% of the core habitats lay outside the current PAs, and finally we mapped approximately 219,545 km2 of suitable habitats as priority protected areas in the future. Although our model did not perform well in some regions, our analyses and findings still could provide useful references to the planning of protected areas and conservation of Asian elephant.

The Sentinel-2 satellite mission offers high resolution multispectral time series image data, enabling the production of detailed land cover maps globally. At this scale, the trade-off between processing time and result quality is a central design decision. Currently, this machine learning task is usually performed using pixelwise classification methods. The radical shift of the computer vision field away from hand engineered image features and towards more automation by representation learning comes with many promises, including higher quality results and less engineering effort. In this paper we assess fully convolutional neural networks architectures as replacements for a Random Forest classifier in an operational context for the production of high resolution land cover maps with Sentinel-2 time series at the country scale. Our contributions include a framework for working with Sentinel-2 L2A time series image data, an adaptation of the U-Net model for dealing with sparse annotation data while maintaining high resolution output, and an analysis of those results in the context of operational production of land cover maps.

Patients with Peripheral-artery-disease (PAD) are prone to risks of major-adverse-limb-events (MALE), and major-adverse-cardiovascular-events (MACE). CHA2DS2-VASc is a prognostic score for Atrial fibrillation stroke risk, however, no study exists that evaluated its predictability for MALE and MACE in PAD patients. In this study, patients with PAD were stratified into four risk groups based on CHA2DS2-VASc score. Cox-proportional hazards models,10-fold cross-validation and Receiver operating characteristic (ROC) analyses were utilized to evaluate the predictability of CHA2DS2-VASc for predicting MALE, MACE, and MALE+MACE. Kaplan-Meier analysis estimated the survival-probability of risk-groups. CHA2DS2-VASc was found to be a significant predictor of MACE (hazard ratio (95% confidence interval; P) = 3.47 (0.99 - 12.18; 0.052), 4.12 (1.19 - 14.14; 0.024), and 5.06 (1.48 – 17.28; 0.009), for moderate-, high- and very-high-risk groups, respectively, while for MALE and MALE+MACE significance was achieved only for high-risk group. MACE demonstrated AUC > 0.8, good-discrimination (c-index > 0.8) and good-calibration. However, MALE and MALE+MACE models failed to achieve good performances. Based on all findings, CHA2DS2-VASc could potentially serve as a risk stratification score for predicting MACE in patients with PAD but failed to qualify as a good predictor for MALE.

In situ imaging of molecular markers on a physical chromosome is an indispensable tool for refin-ing of genetic maps and validation genome assembly at the chromosomal level. Despite tremen-dous progress in genome sequencing the plant genome assembly at chromosome level still remain a challenge. Recently developed optical and Hi-C mapping aim to assist in genome assembly. For high-confidence in the genome assembly at chromosome level more independent approaches will be required. The present study aimed to refined an ultrasensitive Tyr-FISH technique and to de-velop a reliable and easy method for in situ mapping of a short unique DNA sequences on plant chromosomes. We have carefully analyzed the critical steps of the Tyr-FISH technique to find out the reasons for the failures of using the method. It has been shown that successful visualization of marker/gene depends significantly on method of chromosome slide preparation, probe design and labelling, high stringency washing. Appropriate adjustment of these steps allowed us to detect a short DNA sequence of 1.7Kb with a frequency of 51.6%. Based on our results, we developed a reliable and simple protocol for dual-color Tyr-FISH visualization of short unique DNA sequences on plant chromosomes. New protocol allows more accurate determination of the physical distance between markers and can be applied for faster integration of genetic and cytogenetic maps.

In this study, grapevine was used as the research material. This plant which epitomizes the opinion that vertical gardens can have a positive influence on human psychology with their beautiful view, e.g., the hanging gardens of Babylon about 2500 years ago. The study in question was conducted in 2016 at Bingol University, Faculty of Agriculture, the Department of Garden Plants research and application area. The offshoot growth was measured in a fertilizer experiment that formed the control, first application (200 g/100 L water, leaf) and second application (100 g/100 L water + 20% leaf + root). Moreover, the plant’s footprint in the vertical area was determined. The average offshoot growth of 1103 P American grapevine rootstock in the first and second applications was measured as 61.5 cm and 39.5 cm respectively, and it was 43.0 cm and 51.0 for C American grapevine rootstock. The average growth of 1103 P and 1616 C American grapevine in the control group was determined as 30.6 cm and 32.1 cm. The average growth of both American grapevine rootstocks used in the experiment was determined to be higher for the first and second applications than the controls.

Site Index has been widely used as an age normalised metric to account for variation in forest height at a range of spatial scales. Although previous research has used a range of modelling methods to describe regional variation in Site Index little research has examined gains that can be achieved through use of regression kriging or spatial ensemble methods. In this study an extensive set of environmental surfaces were used as covariates to predict Site Index measurements covering the environmental range of \textit{Pinus radiata} D. Don plantations in Chile. Using this dataset, the objectives of this research were to (i) compare predictive precision of a range of geostatistical, parametric and non-parametric models, (ii) determine if significant gains in precision can be attained through use of regression kriging, (iii) evaluate the precision of a spatial ensemble model that utilises predictions from the five most precise models, through using the model prediction with lowest error for a given pixel and (iv) produce a map of Site Index across the study area. The five most precise models were all geostatistical and included ordinary kriging and four regression kriging models that were based on partial least squares or random forests. A spatial ensemble model constructed from these five models was the most precise of those developed (RMSE = 1.851 m, RMSE% = 6.38%) and had relatively little bias. Climatic and edaphic variables were the strongest determinants of Site Index and in particular, variables related to soil water balance were well represented within the most precise predictive models. These results highlight the utility of predicting Site Index using a range of approaches, as these can be used to construct a spatial ensemble that may be more precise than predictions from the constituent models.

This paper investigates whether the Severe Acute Respiratory Syndrome CoronaVirus 2 (SARS-CoV-2) pandemic – also known as COronaVIrus Disease 19 (COVID-19) – could have been favored by specific weather conditions. It was found that the 2020 winter weather in the region of Wuhan (Hubei, Central China) – where the virus first broke out in December and spread widely from January to February 2020 – was strikingly similar to that of the Northern Italian provinces of Milan, Brescia and Bergamo, where the pandemic has been very severe from February to March. The similarity suggests that this pandemic worsens under weather temperatures between 4°C and 11°C. Based on this result, specific isotherm world maps were generated to locate, month by month, the world regions that share similar temperature ranges. From January to March, this isotherm zone extended mostly from Central China toward Iran, Turkey, West-Mediterranean Europe (Italy, Spain and France) up to the United State of America, coinciding with the geographic regions most affected by the pandemic from January to March. It is predicted that next spring, as the weather gets warm, the pandemic will likely worsen in northern regions (United Kingdom, Germany, East Europe, Russia and North America) while the situation will likely improve in the southern regions (Italy and Spain). However, in autumn, the pandemic could come back and affect the same regions again. The Tropical Zone and the entire Southern Hemisphere, but in restricted southern regions, could avoid a strong pandemic because of the sufficiently warm weather during the entire year. Google-Earth-Pro interactive-maps are provided as supplements.

The method of doublet frequency distance (DFD-) maps was applied, here, for visualization of DNA sequence structures of yeast chromosomes. The colour scale “rainbow” of the Octave programming tool is well suited for such visualization. The DFD-maps are generated by comparison of the differences in the number of all base doublets in a shifting frame with all other positions of this frame in a regarded DNA sequence section. This procedure can be applied from DNA-sections of between a few hundred bases (bps) up to a complete chromosome with a million or more bps. An orthogonal DFD-map pattern dominates all chromosomes and its parts. It can be interpreted by a large number of successive mutation events during evolution. In contrast, diagonal patterns indicate duplications of sequence sections and multiple tandem repeats. These periodic structures are found in several chromosomes and are more or less regular or noised. The larger tandem repeat in the subtelomeric region of chromosome 12 presents a characteristic example of a nested multiple-repeat structure. Its pattern in the DFD-map illustrates obviously a temporal order of duplication and mutation events leading to a hierarchical sequence architecture.

Environmental degradation is one of the most visible problems in Hargeisa. Currently, solid waste is disposed of at two dumping sites within the city limits causing nuisance and unsanitary conditions. Moreover, the existing dumpsites are on the verge of closure, therefore necessitating a dire need to be addressed. This research paper is aimed to integrate multicriteria decision analysis and GIS for evaluating the site suitability for the landfill in Hargeisa, Somaliland. For this purpose, eleven significant parameters were selected: proximity from built-up areas, surface water, groundwater well points, sensitive sites (Airports), land use/land cover, geology, soil type, elevation, slopes, roads, and distance to existing dumpsites. These were then integrated using an analytical hierarchy process (AHP). Subsequently, restriction buffer analysis was performed on the seven parameters to obtain better and more accurate results, and restricted zones were omitted. Furthermore, the pair-wise comparison used to obtain priorities between the selected criteria showed that the land uses land cover is the most significant criterion in the model with a relative weight of 0.1829, followed by the habitations, 0.1506. The overall result reveals that about 68.96% (21060.9 ha) of the study area is unsuitable, while 24.36% (7441.53 ha) and 6.68% accounted for the less and highly appropriate zone, respectively. Following the results of this study, Hargeisa City's municipal council must reconsider the waste management and landfill sites to solve the problems observed in the area before it is overdue. Furthermore, this systematic research approach will assist regional and global researchers, policymakers, and municipal governments.

The study presents an assessment of climate suitability for outdoor leisure activities in Romania using the Holliday Climate Index (HCI) for the near future (2021-2040), focusing on unfavorable and good climate conditions. The analysis employs data from an ensemble model in the context of RCP45 and RCP85 climate change scenarios. The results indicate that the number of days with low weather suitability is decreasing in almost the entire country, especially during the warm season, while during the winter and spring extended regions may be characterized by a higher number of days favorable for outdoor activities than during the current climate. An estimation of the impact of climate changes on tourism flux in Romania is further carried out, suggesting that the increasing attractivity of climate conditions may lead to an increased number of tourist overnights in the near future, more pronounced in rural destinations.

In the late Pleistocene, a prehistoric hippo species was distributed from Africa to the Asia including Pakistan, India, and Java island. This study aims to model habitat suitability of Asian hippo known as a Hippopotamus sivalensis spp. in east Java. The measured parameters included the fossil locality, vegetation cover, elevation, and distance to the river in a forest river basin sizing 6652 Ha. Those parameters using GIS were weighted, overlaid, and interpolated to determine the most suitable habitats. The model projected that the suitable habitats of H. sivalensis spp. were in the central of the basin near the river. The largest suitable habitats were located in the eastern parts of basin which were dominated by forests

A new method for wide-area urban roof assessment of suitability for solar photovoltaics is introduced and validated. Knowledge of roof geometry and physical features is essential for evaluation of the impact of multiple rooftop solar photovoltaic (PV) system installations on local electricity networks. This paper begins by reviewing and testing a range of existing techniques for identifying roof characteristics. It was found that no current method is capable of delivering accurate results with publicly available input data. Hence a different approach is developed, based on slope and aspect using LIDAR data, building footprint data, GIS tools and aerial photographs. It assesses each roof’s suitability for PV installation. That is, its properties should allow the installation of at least a minimum size photovoltaic system. In this way the minimum potential solar yield for region or city may be obtained. The accuracy of the new method is then established, by ground-truthing against a database of 886 household systems. This is the largest validation of a rooftop assessment method to date. The method is flexible with few prior assumptions. It is based on separate consideration of buildings and can therefore generate data for various PV scenarios and future analyses.

In network analysis, links depict the connections between each pair of network nodes. However, such pairwise connections fail to consider the interactions among more agents, which may be indirectly connected. Such non-pairwise or higher-order connections can be signified by involving simplicial complexes. The higher-order connections become even more noteworthy when it comes to neuronal network synchronization, an emerging phenomenon responsible for the many biological processes in real-world phenomena. However, involving higher-order interactions may considerably increase the computational costs. To confound this issue, map-based models are more suitable since they are faster, simpler, more flexible, and computationally more optimal. Therefore, this paper addresses the impact of pairwise and non-pairwise neuronal interactions on the synchronization state of 10 coupled memristive Hindmarsh-Rose neuron maps. To this aim, electrical, inner linking, and chemical synaptic functions are considered as 2- and 3-body interactions in three homogenous and two non-homogenous cases. The results show that through chemical pairwise and non-pairwise synapses, the neurons achieve synchrony with the weakest coupling strengths.

Time-series of satellite images reveal important information about changes in environmental conditions and natural or urban landscape structures that are of potential interest to citizens, historians, or policymakers. We applied a fast method of image analysis using Self Organized Maps (SOM) and, more specifically, the quantization error (QE), for the visualization of critical changes in satellite images of Las Vegas, generated across the years 1984-2009, a period of major restructuration of the urban landscape. The satellite images were subdivided into geographic regions of interest. As shown in previous work by the authors, the QE from the SOM output is a reliable measure of variability and local changes in image contents. In the present work, we show how the QE from SOM run on satellite images of specific geographic regions of interest can be exploited for visualizing structural change across time at a glance, and facilitate the interpretation of related demographic data for a specific time period. The method is fast and reliable, and can be implemented for a rapid detection of critical changes in contents of time series of large bodies of satellite images.

This study analyses the changes in land use in the Sado estuary (West-Central Portugal) based on a multitemporal analysis of cartographic data from the 19th century and remote sensing land use maps from the 21st century, updated by field work. A GIS plotting of land-use evolution is summarized in a quantitative table. The comparison shows the changes in land use, with increasing occupation by human economic activities, including extensive agriculture and forestry, as well as localized urbanization and industrialization. The main elements of the landscape impacted by anthropogenic uses were: i) hydrography - river dams affected the flow dynamics and sedimentary processes in the estuary; ii) vegetation – increasing agriculture and forestry reduced the areas of native vegetation, nowadays mostly occupied by vineyards, pine forests and cork oaks. iii) wetlands - tidal and alluvial plains are being occupied by rice cultivation, aquaculture, industries, and ports; iv) coastal dunes – new developments are occupying large areas of Holocene coastal dunes; v) natural environment – mining and dredging affected some habitats and biodiversity. This analysis is intended to help the territorial organization of present and future economic activities, as well as to reduce environmental and social problems, promoting long-term sustainability of this rapidly evolving region.

Poso regency, Central Sulawesi, Indonesia, has a coastal area that has marine tourism potential to be developed. It is expected that marine tourism can bring socio-economic impact to the com-munity. This research was conducted with the objective of assessing the suitability of the area to be developed as a marine and coastal tourism site to provide benefits to the coastal community. Hydrodynamic model will be used in this research as coastal area mapping. As an approach, Analysis Hierarchy Process (AHP) is utilized whose parameters consist of depth, coast type, coast width, brightness, current speed, water base materials, observation of dangerous biota and availability of fresh water. Based on the overall mapping area of 98,644 ha, the research results show that the area that can be utilized is 7,979 ha with a very suitable category, while there is an area of 1,045 ha which can still be classified in the appropriate category.

The contribution of extra-tropical synoptic cyclones to the formation of summer-mean atmospheric circulation patterns in the Arctic is investigated by clustering the dominant Arctic circulation patterns by the self-organizing maps (SOMs) using the daily mean sea level pressure (MSLP) in the Arctic domain (≥ 60°N). Three SOM patterns are identified: one with prevalent low pressure anomalies in the Arctic Circle (SOM1) and two opposite dipoles with primary high pressure anomalies covering the Arctic Ocean (SOM2 and SOM3). The time series of summertime occurrence frequencies demonstrate the largest inter-annual variation in the SOM1, the slight decreasing trend in the SOM2, and the abrupt upswing after 2007 in the SOM3. The relevant analyses with produced cyclone track data confirm that the vital contribution. The Arctic cyclone activity is enhanced in the SOM1 because the meridional temperature gradient increases over the land–Arctic Ocean boundaries co-located with major extra-tropical cyclone pathways. The composite daily synoptic evolutions for each SOM reveal that the persistence of all the three SOMs is less than 5 days on average. These evolutionary short-term weather patterns have substantial variability at inter-annual and longer timescales. Therefore, the synoptic-scale activity is central to forming the seasonal-mean climate of the Arctic.

Land-cover classification that uses very-high-resolution (VHR) remote sensing images is a topic of considerable interest. Although many classification methods have been developed, there is still room for improvements in the accuracy and usability of classification systems. In this paper, a novel post-processing approach based on a dual-adaptive majority voting strategy (D-AMVS) is proposed for improving the performance of initial classification maps. D-AMVS defines a strategy for refining each label of a classified map that is obtained by different classification methods from the same original image and fusing the different refined classification maps to generate a final classification result. The proposed D-AMVS contains three main blocks. 1) An adaptive region is generated by extending gradually the region around a central pixel based on two predefined parameters (T1 and T2) in order to utilize the spatial feature of ground targets in a VHR image. 2) For each classified map, the label of the central pixel is refined according to the majority voting rule within the adaptive region. This is defined as adaptive majority voting (AMV). Each initial classified map is refined in this manner pixel by pixel. 3) Finally, the refined classified maps are used to generate a final classification map, and the label of the central pixel in the final classification map is determined by applying AMV again. Each entire classified map is scanned and refined pixel by pixel based on the proposed D-AMVS. The accuracies of the proposed D-AMVS approach are investigated through two remote sensing images with high spatial resolutions of 1.0 and 1.3 m, respectively. Compared with the classical majority voting method and a relatively new post-processing method called general post-classification framework, the proposed D-AMVS can achieve a land-cover classification map with less noise and higher classification accuracies.

Hydrogeological maps must synthesize the scientific knowledge about the hydraulic features and the hydrogeological behavior of a specific area, and, at the same time, they must meet the expectations of land planners and administrators. Thus, especially in complex interconnected systems, hydrogeological maps can be fully effective when they are purpose-designed. In these contexts, usual graphical approaches in creating hydrogeological maps could result uncomplete and/or ineffective. Therefore, in case of complex systems and/or specific management/protection aims, new and purpose-designed graphical solutions must be applied to enhance the maps effectiveness. In the case study, these solutions show and emphasize all the hydraulic interconnections playing significant roles in recharging the multilayered alluvial aquifer, where the majority of wells have been drilled for drinking/industrial/agricultural purposes, artificial channels are used for agricultural purposes, and the shallow groundwater feeds protected groundwater-dependent-ecosystems. The hydrogeological map was then designed to be the synthesis of three different and hydraulically interconnected main contexts: (i) the main heterogeneous alluvial aquifer (the main target of the purpose-designed map), (ii) the hydrographic basin of a losing river that feeds the main alluvial aquifer, and (iii) those hard-rock aquifers (mainly turbiditic and ophiolitic) whose springs feed the same river.

In Tropical Monsoon climates, precipitation exceeds evapotranspiration, leading to increased surface runoff, especially in floodplain regions. The Bhagirathi-Hooghly River in India is the focus of the study, which analyses hydrology, sediment yield, and water balance in this floodplain area. This investigation employs the Soil and Water Assessment Tool (SWAT) model within the ArcGIS environment, using remote sensing data. The study area is divided into 4 sub-basins and 40 Hydrological Response Units (HRUs), with a focus on Land Use/Land Cover (LULC) parameters, soil attributes, and slope characteristics. Calibration (1998-2010) and validation (2011-2018) of river discharge and sediment yield are performed using the SUFI-2 algorithm within SWAT-CUP. The calibration process shows a strong correlation between observed and simulated data points, indicating the model's accuracy. The study reveals a pattern of early-year evapotranspiration followed by increasing rainfall during the monsoon season, leading to heightened surface runoff and sediment yield. Excessive rainfall, therefore, emerges as a pivotal driver of flood incidences within the floodplain. The insights derived from the SWAT model's floodplain data have the potential to inform flood control and sedimentation mitigation strategies. The assimilation of this data can empower local stakeholders and contribute to sustainable livelihoods and improved living conditions, offering guidance for future governmental policies.

In recent years, land supply in Hong Kong has fallen sharply and fails to keep pace with the growth of population and number of households. Land shortage becomes urgent and dire. With the inadequate provision of residential land, housing supply is also adversely affected.Insufficient housing supply leads to surging property and rental price in the private market. According to the Rating and Valuation Department (RVD), the overall private domestic price index peaked in June 2017 at 336.1. Keen housing demand is also observed in the private rental market. RVD statistics showed that the domestic rental index also reached the peak at 183.6 in June 2017 and the vacancy rate of about 3.8% as at the end-2016, which is much lower than the average vacancy rate of 5% from 1996 to 2015 (Development Bureau, 2017).In addition, there is soaring housing demand in public housing. As at the end-December 2021, the average waiting time for general applicants was 5.7 years, which is nearly double of the Housing Authority’s target for providing the first flat offer to general applicants at around three years on average (Housing Authority, 2021). Identifying and securing sufficient land to meet both current and anticipated pressing housing demand becomes a key challenge of the government. In the light of this, the government has established a dedicated task force (Task Force on Land Supply) in September 2017 and appointed 30 professionals from different disciplines, such as planning, engineering, academia and think tank, to take a Marco-review on the land supply sources, look for feasible options as well as consider the pros and cons of various options. 18 land supply options were worked out for the public to make choices in the public engagement exercise. Among the 18 choices, the development area on the Periphery of Country Parks was regarded as one of the land supplies sources. This option does not only include the Hong Kong Housing Society’s studies on developing Two Pilot Areas on the Periphery of Tai Lam and Man On Shan Country Parks, but also include developing more areas on the periphery of Country Parks. The proposed option received overwhelming attention from the public and aroused debates in various perspectives. Its ecological value, recreational value, financial viability and even legitimacy were discussed. However, spatial analysis on the suitability of having residential development in Country Parks has not been conducted. Therefore, in this study, multi criteria GIS analysis is conducted to evaluate the geographic suitability of Hong Kong Country Parks for residential purpose with the consideration of various criteria.

The paper formulates requirements for a polymer material for molding products from it by fused deposition modeling. A methodology for evaluating the suitability of a polymer or composite of thereof in 3D printing technology has been developed. A graphic representation of the developed methodology in the form of a temperature-shear rate logarithm diagram is proposed. Application of the proposed methodology makes it possible to simplify the development of new materials for 3D printing by fused deposition modeling both at the stage of selecting the components of the polymer composition and at the stage of its subsequent approbation.

River regulations ultimately degrade fluvial forms and morphodynamics and simplify riparian and aquatic habitats. For several decades, river restoration actions have been performed to recover geomorphic processes and diversify these habitats to enhance both river biodiversity and ecosystem services. The objective of this study is to provide quantitative feedback on the experimental restoration of a large regulated and by-passed river (the Upper Rhine downstream of the Kembs Dam, France/Germany). This restoration consisted of the construction of two transverse groynes and the removal of bank protection. A monitoring framework composed of topo-bathymetric surveys as well as flow velocity and grain size measurements was established to assess the channel morphodynamic responses and evaluate their effects on habitat suitability for five native fish species using habitat models. A riverscape approach was used to evaluate the landscape changes in terms of both the configuration and the composition, which cannot be considered with classic approaches (e.g., WUA). Our results show that the two transverse groynes and, to a lesser extent, bank erosion, which was locally enhanced by the two groynes, increased habitat diversity due to the creation of new macroforms (e.g., pools and mid-bars) and fining of the bed grain size. Using a riverscape approach, our findings highlight that the restoration improved lentic fish habitats (eel and juvenile nase species) due to slowing of the local current and the deposition of fine sediments downstream of both groynes. As a consequence, the restoration improved the habitat suitability of the studied reach for more fish species compared with the pre-restoration conditions. This study also demonstrates that the salmon habitats downstream of the restored reach were improved due to fining of the bed grain size. This finding highlights that for restorations aimed at fish habitats, the grain size conditions must be taken into consideration along with the flow conditions. Furthermore, the implementation of groynes, while not a panacea, can be a strategy for improving fish habitats on highly regulated rivers, but only when more functional and natural options are impossible due to major constraints.

Antibody responses to severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) are multi-targeted and variable over time. Multiplex quantitative serological assays are needed to provide accurate and robust seropositivity data for establishment of serological signatures during vaccination and or infection. We describe here, validation and evaluation of an electro-chemiluminescence (ECL) based Mesoscale Discovery assays (MSD), for estimation of total and functional IgG to SARS-CoV-2 spike, nucleocapsid, and receptor binding (RBD) proteins in human serum samples to establish serological signatures of SARS-CoV-2 natural infection and breakthrough cases. The 9-PLEX assay was validated as per ICH, EMA and US FDA guidelines using a panel of sera samples including the NIBSC/WHO international reference panel (20/268). Assay demonstrated high specificity and selectivity in inhibition assays, wherein the homologous inhibition was more than 85% and heterologous inhibition was below 10 %. Assay also met predetermined acceptance criteria for precision (CV < 30 %), accuracy (70-130 %) and dilutional linearity. Method applicability to serological signatures was demonstrated using sera samples (N=45) representing vaccinated, infected and breakthrough cases. The method was able to establish distinct serological signatures and thus provide potential tool for seroprevalence of SARS-COV-2 during vaccination or infection.

This study to assess the Physical Land Suitability Analysis for Cultivation of Selected Cool Weather Cereal Crops, Misha District, Hadiya Zone, South Central Ethiopia of major cereal crops of barley and teff in Misha district. Each of the criteria was separately reclassified and analyzed for their suitability for supporting barley and teff crops based on the FAO crop requirements specified for them. The major data sources were climatic data, soil, LGP and topographic data as well as key informant interview, questioner observation of crop requirements which have been considered to undertake suitability assessments of the study area. The factor maps like land use /land cover, temperature, rain fall, soil type and altitude were classified based on suitability evaluation methods of FAO and experts’ opinion. At final stage these were reclassified and standardized in GIS software extension tools, which led to the preparation of suitability analysis map of the major crops plant suitability classes. As part of spatial MCDM, AHP pair wise comparison module was used to derive internal and external weights for each individual factors and parameters respectively. Consequently, suitability analysis was done and weighted overlay suitability map was visualized with integration of GIS. The findings show that among total area of land suitability maps for both barley and teff cops were using weighted overlay techniques. The suitability map of teff crop shows that 12,038.22 hectare of the investigated area are highly suitable (S1), 19,646.07 hectare moderately suitable (S2) and 4,501.71 hectare marginally suitable (S3) and 112 hectare not suitable. On the other hand, the suitability map of barley crop shows that 7,898.52 hectare of the investigated area are highly suitable (S1), 22,830.08 hectare moderately suitable (S2), and 5,466.4 hectare marginally suitable (S3) and 103 hectare not suitable for economic reasons (N1). This was done for barley and Teff crops separately. Results of the study revealed that most of the lands in the study area are suitable for the cultivation of the selected crops and other crops. Based on finding, it could be recommended that this work would be used as policy guide for planners; investment could be successful in the District, further suitability research works should be carried out in order to optimize the major crop cultivation and production.

Holothuria scabra Jaeger 1833, known as sandfish visually, Its visible external body has a soft, flexible texture. Sandfish is included in the Echinodermata phylum and Holothuroidea class, which has an important ecological and economic role. This research proposes to decide the suitability site in an intermediate culture model of sea ranching harvest type based on ecological, socio-cultural and Karimunjawa National Park zoning plan. Data collected has done in March 2020, November 2020 and August 2021. The data analysed on the environmental suitability level was based on several essential criteria matrices used by ArcGIS 10.8.2. They were four classes performed (high suitable, suitable that is enough, suitable with conditionals, and not suitable) based on each variable and matrix classification from main factor (6 variables), supporting factor (5 variables), dan another factors (1 variable). The highest score was 35, and the lowest was 23 during the class interval value. The analysis showed that the aquatic environment that was High Suitable (S1) for sandfish life was Gede Lagoon. It has been determined to be highly suitable for developing sandfish cultivation. Furthermore, the Sea Ranching Harvesting Type development would recommend being carried out in waters that do not have limiting factors.

African swine fever (ASF) is a viral infection of pigs and represents a major threat to animal health and trade. Due to the high tenacity of the causative virus also in carcasses of wild boar, contacts of wild boar with infectious carcasses are regarded an important driver of the so-called habitat cycle. The latter is believed to play a major role in maintaining the present ASF situation in wild boar in Europe. Therefore, search campaigns and timely removal and disposal of carcasses are considered important disease control approaches. If timely disposal is not feasible due to logistic reasons, deterrence of wild boar could be a provisionary option. The performance of seven deterrents (physical and chemical) was tested in a forest near Greifswald, Germany. Carcasses as entities of attraction for wild boar were substituted by luring sites. It could be demonstrated that certain physical (LED-Blinkers, aluminum stripes) and chemical (Wildschwein-Stopp™, Hukinol™) deterrents are capable of reducing significantly the odds of wild boar contacts to one third. It is recommended to carry a choice of the aforementioned, reasonable and easy to apply deterrents, when carcass search campaigns are launched in case of an outbreak of ASF in wild boar.

In the clinical electrophysiologic practice, the reading and comparing electroencephalographic (EEG) recordings some times is insufficient and take to much time. That is why in the last years it has begun to introduce new methods of EEG analysis, that give a better and faster understanding of the EEG dynamics and allow a rapid intervention in the patient's treatment. Tools coming from the information theory or nonlinear system as an entropy and complexity have been shown to be a very good alternative to address this problem. In this work we introduce a novel method -the permutation Lempel-ziv complexity vs permutation entropy map. This method was applied to EEG of two patients with specific diagnosed pathologies during respective follow up processes of pharmacological changes in order to detect changes that are not evident with the usual inspection method. Our results show that the proposed method are useful for observing an evolutionary retrospective clinical effects of pharmacological interventions in both patients, and from these, to follow the clinical response to the proposed treatment.

The emergence of few-shot learning as a potential approach to address the problem of data scarcity by learning underlying pattern from a few training sample had so far given a mix-result especially on the suitability of model-agnostic meta learning, transfer learning, and optimization strategy to rapidly learn valid information from few sample. In this research, we did an in-depth evaluation of meta- learning to determine their plausibility and suitability for previously unknown cyberattack detection by first retrieving the original research artifacts of current state of the art meta learning to repeat the experiment with original dataset before replicating the experiment with two different malware dataset which had not been previously done with meta-transfer learning. On each of the experiments, meta-transfer learning gave good results on digital character recognition dataset but abysmal result on Malimg and Malevis malware images datasets thereby indicating its unreliability for detecting cyberattacks and the need for an improvement to the state-of-the-art meta transfer learning towards a better attack detection. Transfer learning performance is independent on imbalance and hence does not influence its performance since both malware dataset used for this experiment result in high validation loss and balancing the dataset doesn't result in reduced validation loss,the successful learning transfer seen on digital character recognition dataset is not unconnected to the fact that several languages have similar characters and digits thereby enhancing the successful learning transfer unlike malware datasets, and more importantly the finding that current meta-learning transfer approach doesn't generalize well on malware dataset and hence not suitable for detecting previously unseen out-of-distribution attack.

This paper examines the influence of the petrographic characteristics of sandstones from Klepa Nafpaktias (Greece) on their suitability in construction (concrete) and energy storage applications. For this scope, ten sandstones were collected in order to study their petrographic characteristics using petrographic microscope and a GIS software as well as their basic physical, mechanical and physicochemical properties. Concrete specimens (C25/30) were produced with constant volume proportions, workability, mixing and curing conditions using different sizes of each aggregate type. Aggregates were mixed both in dry and water saturated states in concrete. Three different types of sandstone aggregates were examined and classified in three district groups according to their physicomechanical properties, petrographic characteristics and surface texture. The classification in groups after the concrete compressive strength test (UCS) verified the initial classification in the same three groups relative to their grain size from coarse to fine grained. As the grain size decreases their physicomechanical and physicochemical properties are getting better resulting in higher concrete strength values (25 to 32 MPa). Furthermore, the proposed ratio C/A (crystals/ mm2) seems to influence the aggregate properties which constitute critical factors for the final concrete strength, presenting the more fine grained sandstones as the most suitable for concrete aggregates. Concerning the use of Klepa Nafpaktias sandstones as potential energy reservoirs, the studied sandstones have the appropriate physicochemical properties for the implementation of a financially feasible CO₂ capture and storage scenario.

The main goal of the review is to provide a summary and an assessment of the potential of fast-growing tree species for suitable transformation of agroforestry areas for biomass production in the Baltic Sea region. The article summarizes the research on the management process of agroforestry zones by establishing short rotation plantations with tree species Salix spp., Populus spp., Alnus spp. and looks at the perspectives of planning of these zones as biomass producers. Short rotation forestry (SRF) with a combination of species and a rotation time of 15 to 30 years, depending on the species used, is the most suitable approach for management of these agroforestry zones. Willows (Salix spp.) and poplars (Populus spp.) are suitable for short rotation coppice (SRC), as these tree species can be harvested at much shorter intervals, respectively, 1–5 and 4–10 years, facilitating their use in agricultural systems. In Alnus spp. short rotation plantation the life cycle for energy wood production is assumed to be 15-30 years. The black alder plantations in agroforestry zones are used for sawnwood and firewood production, with a rotation span of 20–40 years. Calculated economic agroforestry zone repayment period is about 10-15 years, if costs and prices as in 2021 are used.

The German government's ambitious goal of achieving CO2-neutrality by 2045 has prompted a focus on improving building insulation as a vital step toward energy efficiency. However, in this process, existing radiators and boilers are often left unchanged, leading to inefficiencies due to oversized heating systems. This paper presents various approaches to reduce the required radiator inlet temperature, drawing on data from 100 multifamily buildings. The approaches include heat reserve reduction, heat power shifting, uniform radiator usage, and heat requirement analysis. These approaches collectively aim to lower flow temperatures and decrease peak heat loads, reducing energy consumption, and minimizing waste in compliance with the user comfort temperature. The findings reveal that the application of these methods can lead to substantial temperature reductions, with an average decrease of 20.82 K and 7.28 K for the highest necessary flow temperature in the provided example. Furthermore, peak load reductions of 21.07% and 13.65% were achieved, demonstrating the potential to enhance energy efficiency. While each approach can be applied individually, their synergistic implementation can highly increase the efficiency of water to x heat pumps, due to the lower required flow temperatures.

Background: Early diagnosis of postoperative complications is an urgent task, allowing timely prescribing of appropriate therapy and reducing the cost of patient treatment. Prognostic models based on various data could help in the early diagnosis of postoperative complications after cardiac surgery. Objectives: The purpose of the study was to determine whether an integrated approach based on clinical data along with metabolites and biomarkers had greater predictive value than the models built on less data. Methods: The study included patients (n=62) admitted for planned cardiac surgery (coronary artery bypass grafting with cardiopulmonary bypass), who were retrospectively divided into two groups depending on the presence (n=26) or absence (n=36) of postoperative complications of all types. Clinical and laboratory data on the first day after surgery were analyzed. Additionally, patients' blood samples were collected before and on the first day after surgery to determine biomarkers (interleukin-6, procalcitonin, NT-proBNP, high-sensitivity troponin T) and metabolites (8 aromatic and 2 dicarboxylic acids were detected using gas chromatography-mass spectrometry). Results: Patients before surgery, compared with healthy donors, differed in the concentration of metabolites (p &lt; 0.05), and had concentrations of a number of biomarkers exceeding the corresponding reference values. Multivariate PLS-DA models, predicting the presence or absence of postoperative complications, were built using clinical data (ROC-AUC=0.71), concentrations of metabolites and biomarkers (ROC-AUC=0.60), and the entire data set (ROC-AUC=0.75). For comparison we built univariate models using the EuroScore2 (ROC-AUC=0.59) and SOFA (ROC-AUC=0.76) scales; concentrations of lactate (ROC-AUC=0.71), the dynamic changes of 4-hydroxyphenyllactic acid (ROC-AUC=0.69), and the sum of three sepsis-associated metabolites (ROC-AUC=0.70). The proposed complex model using entire data set was comparable to the SOFA scale, which confirms the expediency of searching for new predictive models based on a variety of factors.

Milk serves as a crucial source of natural bioactive compounds essential for human nutrition and health. The gastrointestinal digestion of milk proteins releases various biologically active peptides that positively impact human health and enhance physiological performance. With the growing production of cheese, Greek yogurt, and other dairy products, the volume of unutilized acid whey is significantly increasing. Acid whey, containing almost all whey proteins and approximately one-quarter of casein, presents a valuable raw material for generating peptides with potential health benefits. These peptides exhibit properties such as antioxidant, antimicrobial, anti-inflammatory, anticarcinogenic, antihypertensive, antithrombotic, opioid, mineral-binding, and growth-stimulating activities, contributing to improved human immunity and the treatment of chronic diseases. Enzymatic hydrolysis of milk proteins has been developed as a method to produce these peptides, facilitating their use in food fortification. To incorporate whey into functional beverages, it undergoes fermentation by lactic acid bacteria with proteolytic activity. To specifically enrich these beverages with peptides exhibiting targeted bioactivities, it is essential to select lactic acid bacteria strains possessing the requisite protease profiles. Additionally, the sensory properties of the final product can be enhanced using starter cultures with diverse metabolic capabilities, even in the absence of added flavoring agents. Given the imperative to develop waste-free technologies and enhance the profitability of the dairy industry, there is a growing need to efficiently utilize and transform acid whey into a broad spectrum of valuable products and food additives. This approach is justified not only by the nutritional benefits of the bioactive components in whey but also by the commercial potential of safe and health-enhancing products.

The paper focuses on the application of a multilevel, integrative and territorial approach to the protection of cultural heritage through planning instruments in Serbia. It points out the problems of the sectoral approach and discusses international recommendations that can be integrated into the planning methodology. The case study is the area of Djerdap National Park, which has an already established international and national importance. The research suggests that the cultural heritage in the area, with the exception of the Roman limes, is still recognized at the level of individual localities. The study emphasizes the importance of aligning all levels of governance to safeguard the whole spatial entity rather than focusing solely on its particular areas. The interna-tional and national importance of the planning area contributes to the strengthening of awareness of heritage and its institutional protection. However, the vitality of the area, which is key to its sustainable development, comes from the local level. Planning documents contribute to the inte-gration of local values and local communities into development programs and projects.

The impact of interaction SS with MJO on rainfall along Java Island to East Nusa Tenggara has been studied using daily rainfall observation data from 2140 weather observation stations, which are also equipped with GSMaP, OLR, and ERA5 data. There were 61 SS events found, 17 during active MJO and 44 in inactive MJO. Rainfall increases more in the western study area when the active MJO and more in the eastern study area when the inactive MJO is due to SS. SS reduces rainfall in the Jakarta region, regardless of the activity or inactivity of the MJO. SS causes extreme rainfall to only occur in a small part of certain areas, so it tends to significantly reduce the possibility of extreme rainfall. In the southern part of the IMC, SS predominates over MJO in supporting increased water vapor transport. Large-scale synoptic circulations like the monsoon, SS, and MJO can interact with local land-sea wind circulation to produce spatiotemporal variability in rainfall on Java Island. Rainfall mostly increases in the afternoon and decreases in the morning when SS occurs, whether there is MJO or not. Convective instability analysis indicates that SS increases precipitation, most likely by lowering CIN and raising VIMFC.

In order to shorten the detection time and improve the average precision on embedded devices, A lightweight and high accuracy model is proposed for passion fruit in complex environments (backlight, occlusion, overlap, sunny, cloudy, rainy). Firstly, replacing the backbone network of YOLOv5 with a lightweight GhostNet model reduces the number of parameters and computation while improving detection speed. Secondly, a new feature branch is added to the GhostNet network, and the feature fusion layer in the neck network is reconstructed to effectively combine the lower-level and higher-level features, which not only improves the accuracy of the model but also maintains its lightweight. Finally, the knowledge distillation methods are used to transfer the knowledge from the more capable teacher model to the less capable student model, which significantly improving the detection accuracy. The improved model is denoted as G-YOLO-NK. The average accuracy of the G-YOLO-NK network is 96.00%, which is 1.00% higher than the original YOLOv5s model. Furthermore, the improved model size is 7.14MB, reduced to half of the original model, and the real-time detection frame rate is 11.25 FPS on the Jetson Nano. Compared to the state-of-the-art model, the proposed model outperforms them in terms of average precision and detection performance. The present work provides an effective model for real-time detection of passion fruits in complex orchard scenes, which can provide valuable technical support for the development of orchard picking robots and greatly improve the intelligence level of orchards.

The Simultaneous Localization And Mapping (SLAM) scanner is an easy and portable Light Detection And Ranging (LiDAR) data acquisition device. Its main output is a 3D point cloud covering the scanned scene. Regarding the importance of accuracy in the survey domain, this paper aims to assess the accuracy of two SLAM scanners: the NavVis VLX and the BLK2GO Scanner. This assessment is conducted for both outdoor and indoor environments. In this context, two types of reference data are used: the Total Station (TS) and the static scanner Z+F Imager 5016. To carry out the assessment, four comparisons are tested: cloud to cloud, cloud to mesh, mesh to mesh, and edge detection board assessment. However, the results of the assessments confirm that the accuracy of indoor SLAM scanner measurements (5 mm) is greater than that of outdoor ones (between 10 mm and 60 mm). Moreover, the comparison of cloud to cloud provides the best accuracy regarding direct accuracy measurement without manipulations. Finally, based on the high accuracy, scanning speed, flexibility, and the accuracy differences between tested cases, it is confirmed that SLAM scanners are effective tools for data acquisition.