In response to droughts, various media campaigns and water saving instructions are released, often however, with only temporary water conservation effects. A promising development is this regard are Digital Water Meters (DWM) that provide near real-time water-use feedback. Despite extensive DWM experience in some water-stressed regions, a profound understanding of the initial attitude towards DWM and message tailoring opportunities are rarely empirically explored. Therefore, we aim to obtain insights into the attitude towards the introduction of DWM and explore opportunities for message tailoring, a topic of extra relevance as we may be on the threshold of a large-scale implementation in many world regions. Messages tailored to (i) normative beliefs and attitudes on drinking water, (ii) water-use activity and (iii) phase of decision-making, seem particularly compatible with DWM. Through a survey (n=1037) in the Netherlands, we observe that 93% of respondents have no objections utility investments in DWM and that 78% would accept a free DWM because of improved leakage detection, lower costs and environmental considerations. Finally, instead of sociodemographic factors, we observed that an attitude-based customer segmentation approach proved an especially useful predictor of respondent’s motivation to endorse DWM and forms a promising basis for water conservation message-tailoring strategies.

Heat metres are used to calculate the consumed energy in central heating systems. The subject of this article is to prepare a method of predicting a failure of a heat meter in the next settlement period. Predicting failures is essential to coordinate the process of exchanging the heat metres and to avoid inaccurate readings, incorrect billing and additional costs. The reliability analysis of heat metres was based on historical data collected over many years. Three independent models of machine learning were proposed, and they were applied to predict failures of metres. The efficiency of the models was confirmed and compared using the selected metrics. The optimisation of hyperparameters characteristics for each of models was successfully applied. The article shows that the diagnostics of devices does not have to rely only on newly collected information, but it is also possible to use the existing big data sets.

The interest in virtual fencing, as opposed to traditional physical barriers, has increased since it makes it easier to move the boundaries of animal enclosures for agricultural and rewilding purposes. Despite this, the implementation of virtual fence systems, such as the Nofence© system, requires large financial investments. The necessity of individual collars also makes it more difficult to implement this system on a larger scale. If a herd of cattle tend to maintain cohesive social groups around dominant individuals, it might be possible to use fewer collars thereby making the system more cost efficient. This study investigates the pattern in spatial distribution in a herd of 17 Angus cows on Fanø in Denmark with GPS locations, using a Nofence© system. The aim of this paper is to determine how individuals position themselves in a herd, spatially, and identify a pattern in ranks. The method used in this study examines the distances between an individual to the rest of the herd mates using nearest neighbour and distribution plots. Contrary to the expectations, this study did not show a distinct pattern in herd distribution. While some tendencies in spatial distribution patterns were observed, only a low concordance could be found (W=0.15,p=3.02e−16). Therefore, interactions among individuals should be considered in future studies, rather than only investigating the herd as one unit. A cumulative curves of the ranks estimated over the entire periods allowed however a rough estimation of the hierarchy and allowed the identification of the highest ranked cows. Therefore it might be possible to use fewer collars if the high ranked cows are discovered, but the estimation of the hierarchy will require a period of observation overall several days as the hierarchical positions are fluctuating too much from days to days. Therefore the cumulative rank curves seems to be a valid solution.

This research presents the creation of a Virtual Reality experience for the Balzi Rossi museum, commemorating the centenary of Prince Albert I Grimaldi's archaeological work at the site. The project, a collaboration between the University of Genoa's 3D Lab Factory, Eurodrone, and the Balzi Rossi archaeological museum, aims to preserve and convey the site's heritage through advanced VR technology. Initially employing Unreal Engine 4, the team used photogrammetry for 3D reconstruction of the "Caviglione" and "Florestano" caves, notable for their ancient rock engravings. This first VR model, despite hardware limitations, provided an interactive exploration of the site. The subsequent development phase utilized Unreal Engine 5, incorporating Nanite technology for enhanced visual fidelity. This advancement resulted in a more detailed and immersive VR experience, presenting the Balzi Rossi cliff across different historical periods, including the Würm glaciation. Key to this phase was optimizing the VR experience for performance, focusing on stable frame rates and minimizing motion sickness, and integrating a multi-lingual interface for broader accessibility. Since November 2023, the VR setup at the Balzi Rossi Museum has been an educational and interactive feature, enabling visitors to explore the site's history virtually. This research demonstrates the potential of VR in cultural heritage preservation and education, providing a foundation for future technological improvements in the field.

The need to increase the energy efficiency of buildings as well as the use of local renewable heat sources has caused that heat meters are used not only to calculate the consumed energy but also for the active management of central heating systems. Increasing the reading frequency and the use of measurement data to control the heating system expands the requirements for the reliability of heat meters. The aim of the research is to analyse a large set of meters in the real network and predict their faults to avoid inaccurate readings, incorrect billing, heating system disruption and unnecessary maintenance. The reliability analysis of heat metres, based on historical data collected over several years, shows some regularities which cannot be easily described by physics-based models. The failure rate is almost constant and does depend on the past but is a non-linear combination of state variables. To predict meters' failures in the next settlement period, three independent machine learning models are implemented and compared with selected metrics because even the high performance of a single model (87\% True Positive for Neural Network) may be insufficient to make a maintenance decision. Additionally, performing hyperparameters optimisation boosts models' performance by a few percent. Finally, three improved models are used to build an ensemble classifier which outperforms the individual models. The proposed procedure ensures the high efficiency of fault detection (>95\%), while maintaining overfitting at the minimum level. The methodology is universal and can be utilised to study the reliability and predict faults of other types of meters and different objects with the constant failure rate.

Epidemiological surveillance and phylogenetic studies rely nowadays on processing and analysing huge volumes of data. Processing tasks consist on running and refining a series of intertwined computational tasks. And, despite of existing several web applications for data processing and interactive visualization for phylogenetic studies, integrating many different tools and algorithms, their execution is total or partially on the client side, making them unsuitable for dealing with huge volumes of data. Studies are often also not easy to reproduce. On the other hand, in recent years, data-centric workflow systems have been proposed, allowing to deal better with increasingly larger datasets. The integration of these systems within phylogenetic tools will allow to scale them as required, and will contribute also to promote studies reproducibility. We propose then the FLOWViZ middleware for facilitating the integration of a state of the art data-centric workflow system, Apache Airflow, within web applications for phylogenetic analyses. This framework abstracts contracts and a core API for defining tools and workflows, where tools are assumed to be containerized. FLOWViZ has been tested and evaluated within the PHYLOViZ web application, a tool supporting phylogenetic inference and data visualization.

In this paper, a method is developed for presenting a novel virtual torque sensor based on precise model and position measurements avoids the need of traditional strain gauges and amplifiers. More specifically, the harmonic drive compliance model and the Gaussian process regression (GPR) technique are used together to achieve virtual torque sensor measurement. While the harmonic drive compliance model provides the analytic part, the Gaussian process regression method is used to reconstruct the unmolded part based on motor-side and link-side joint angles as well as motor current. After an automatic offline calibration, the method allows for a lean online implementation. The virtual torque sensor measurement is compared with measurements of a commercial torque sensor, and the results have attested the effectiveness of the proposed method.

This paper presents a methodology for determining the sensitivity of the main air flow directions in ventilation subnetworks to changes of aerodynamic resistance and of air density in mine workings. Formulae for determination of the sensitivity of the main subnetwork air flows by establishing the degree of dependency of the air volume stream in a given working on the variations in resistance or air density of other workings of the network have been developed. They have been implemented in the VentGraph mine ventilation network simulator. This software, widely used in Polish collieries provides an extended possibility to predict the process of ventilation, air distribution and, in the case of underground fire, also the spread of combustion gasses. The new method facilitates assessment by mine ventilation services of the stability of ventilation systems in exploitation areas and determine of the sensitivity of the main subnetwork air flow directions to changes of aerodynamic resistance and air density. Recently in some Polish collieries new longwalls are developed in seams located deeper then the bottom of the intake shaft. Such solution is called “exploitation below the level of access” or “sublevel”. The new approach may be applied to such developments to assess the potential of changes of direction and air flow rates. In addition, interpretation of the developed sensitivity indicator is presented. While analyzing air distributions for sublevel exploitation, application of current numerical models for calculations of the distribution results in tangible benefits, such as the evaluation of the safety or risk levels for such exploitation. Application of the VentGraph computer program, and particularly the module POŻAR (fire) with the newly developed options, enables an additional approach to the sensitivity indicator in evaluating air flow safety levels for the risks present during exploitation below the level of the intake shaft. The analyses performed and examples presented enabled useful conclusions in mining practice to be drawn.

Instep weights cause mechanical changes, modifying muscle activity and changing ground plantar support. 30 semi-professional sprinters, randomized in 3 groups [no-weight, Ascending (50, 100, 150 and 200g), Descending (200, 150, 100 and 50g)] run 6 consecutive 50-meter series at maximum speed (first and sixth without weights); partial, total times and speed were analyzed. Instep weights were safe and well tolerated. 6th series speed decreased except in men’s ascending group, who achieved a lower time in sixth compared to first series. Weights presented in ascending order in men during warm-up could improve running time. Instep weights neuromuscular effects could compensate men’s tiredness in last series; weights could be included in training methodologies. Men training weights presented in ascending order may provide better results.

This research paper examines a cosmological model in flat space-time via $f(R,G)$ gravity where $R$ and $G$ are respectively the Ricci scalar and Gauss-Bonnet invariant. Our model assumes that $f(R,G)$ is an exponential function of $G$ combined with a linear combination of $R$. We scrutinize the observational limitations under a power law cosmology that relies on two parameters - $H_0$, the Hubble constant, and $q$, the deceleration parameter, utilizing the 57-point $H(z)$ data, 8-point BAO data, 1048-point Pantheon data, joint data of $H(z)$ + Pantheon, and joint data of $H(z)$ + BAO + Pantheon. The outcomes for $H_0$ and $q$ are realistic within observational ranges. We have also addressed Energy Conditions, $Om(z)$ analysis and cosmographical parameters like Jerk, Lerk and Snap. Our estimate of $H_0$ is remarkably consistent with various recent Planck Collaboration studies that utilize the $\Lambda$CDM model. According to our study, the power law cosmology within the context of $f(R,G)$ gravity provides the most comprehensive explanation for the important aspects of cosmic evolution.

In recent years, semiconductor survey meters have been developed and are in increasing demand worldwide. This study aimed to investigate whether it is possible to calculate the time constant of the semiconductor survey meter using the X-ray equipment installed in each medical facility and whether it is possible to calibrate the semiconductor survey meter. Attach an additional filter to the medical X-ray system to satisfy the standards of N-60 to N-120, add more copper plates from there, and calculate the first and second half-value layers to compare with N-60 to N-120 values. Next, we will measure the leakage dose using a medical X-ray system and calculate the time constant of the survey meter. The survey meter is then calibrated and compared with the calibration factors in industrial X-ray system. Per experimental results, it is possible to reproduce the N-60 to N-120 radiation quality using a medical X-ray system and to calculate the time constant from the measured results assuming actual leakage dosimetry using that radiation quality. We also found that the calibration factor was equivalent to that of an industrial X-ray device. It was revealed that semiconductor survey meters can be calibrated using a medical X-ray system.

Sensory integration is an essential function of human life, and its decline causes difficulties in the quality of life, especially in older adults. In this study, we proposed an arm-reaching task based on a virtual reality head-mounted display (VR-HMD) system to assess sensory integration in daily life, and examined whether reaching task performance was associated with age and resting-state functional connectivity (rsFC) between the brain regions of interest involved in sensory integration. We hypothesized that performance during a reaching task with multiple cognitive loadings would be affected by aging. The gap angle between the reaching hand and target positions was compared between older and middle-aged adults as a measure of sensory integration function. In addition, rsFC, which was significantly correlated with the gap angles of individual participants in the older adult group, was identified using resting-state functional magnetic resonance imaging data. The mean gap angle was significantly larger in the older adults than in the middle-aged group and was also significantly correlated with connections between the left primary motor area and the left inferior temporal gyrus, temporo-occipital part. Because the connectivity between the areas is known to be related to visuomotor integration, the results suggest the involvement of visuomotor integration in the decline of sensory integration function in old age and the validity of the gap angle during the proposed VR-HMD task as an index for the decline in function.

Fractional flow reserve (FFR) is well recognized as a gold standard measure for the estimation of functional coronary stenosis. Technological progressions in image processing have empowered the reconstruction of three-dimensional models of the coronary arteries via both non-invasive imaging modalities, such as Coronary Computed Tomography Angiography (CCTA), and invasive coronary angiography or intravascular imaging. The application of computational fluid dynamics (CFD) techniques to coronary 3D anatomical models allows the virtual evaluation of the hemodynamic significance of a coronary lesion with high diagnostic accuracy in comparison to the invasive FFR using pressure wires. These opportunities providing hemodynamic information based on anatomy have given rise to a new era of functional angiography and coronary imaging. However, further validations are needed to overcome several scientific and computational challenges before these methods are applied in everyday clinical practice. This review aims to present all the data on the studies and methodologies that have been presented for the virtual estimation of FFR, and the diagnostic execution of the virtual tools for the hemodynamic assessment of coronary lesions compared to the invasive FFR.

Accurate measurement of low-level thoron gas and high-accuracy calibration of thoron measurement devices are essential for assessing and preventing thoron radiological risks. This study aimed to develop a thoron gas measurement technique using an airflow-through scintillation cell for both low-level measurement and high-accuracy calibration. To achieve this, a compartment model was developed to estimate the influence of progeny deposition and accumulation on the wall of the scintillation cell to prevent overestimation of thoron. A self-developed scintillation cell was utilized to implement and validate this technique. The lower detection limit and measurement uncertainty were then evaluated to assess the feasibility of the technique for low-level measurement and high-accuracy calibration. The results showed that the compartment model effectively addressed the influence of the progeny deposition. The measurement technique achieved a lower detection limit below 100 Bq m-3 even with the coexistence of 100 Bq m-3 of radon and attained a measurement uncertainty (k = 2) below 10% when the concentration of thoron exceeded 1,000 Bq m-3. In summary, this study developed a reliable and practical thoron gas measurement technique using an airflow-through scintillation cell with consideration for progeny deposition, and is expected to contribute to the assessment and prevention of thoron radiological risk.

Backgroumd: The feeling of nasal obstruction is one of the most complaints of the Ear Nose and Throats (ENT) patients. The reason of this complaint is variable, such as Nasal Septal Deviation (NSD). NSD is a significant obstacle to normal respiration and the volume of air entering the lungs. Understanding how the deviation causes the obstruction is so important, because it leads to better management of this disease. Rhinomanometry and acoustic rhinometry are methods that are used for objective evaluation of upper airway, but they are semi invasive and the accuracy are not guaranteed. With development of Computed Tomography (CT scan) and Computational Fluid Dynamics (CFD), numerical studies on airflow in different parts of the nasal cavity have been performed. Objectives: The purpose of this study was to compare nasal airflow patterns between patient with NSD and healthy nasal cavity using a computational fluid dynamics (CFD) Methods: A patient with NSD and a healthy human were selected. Using CFD, the maximal airflow velocity, nasal resistance, maximal Wall Shear Stress (WSS), and pressure drop in bilateral nostrils of both cases were assessed. Results: Pressure and velocity profiles are evaluated at a mass flow rate of 17.4 Liters Per Minute (LPM). The velocity profile shows an abnormal flow profile in the septal deviated nasal cavity and the peak velocity is observed at the middle nasal region, whereas this point is at the nasal valve level in a healthy nasal cavity. Wall shear stress (WSS) caused by NSD is lower than in normal nasal cavities. The pressure drop in a nasal cavity with deviated septum is higher than in a healthy nasal cavity. Based on the results of this investigation nasal resistance in NSD was higher than in normal, healthy nasal cavity. Conclusions: NSD plays an important role in nasal airflow regime and it results in the feeling of obstruction comparing to normal nasal cavity. Also there is a promising future for CFD to become a useful tool in understanding airflow physiology and pathology.

Technological advances made Virtual and Mixed Reality (VMR) accessible at our fingertips. However, only recently VMR has been explored for the teaching of biology. Here, we highlight how VMR applications can be useful in biology education, discuss about caveats related to VMR use that can interfere with learning, and look into the future of VMR applications in the field. We then propose that the combination of VMR with Machine Learning and Artificial Intelligence can provide unprecedented ways to visualise how species evolve in self-sustained immersive virtual worlds, thereby transforming VMR from an educational tool to the centre of biological interest.

Abstract: Circuit breakers are affected by multiple lightning strikes after the breaker has been tripped and can break down again, which will reduce the life of the circuit breaker and threaten the stable operation of the power system. Aiming at this problem, the paper obtained the temperature diffusion process of the inrush current process of circuit breaker opening and breaking through the schlieren technique, and combined with the existing image recognition technology to obtain the temperature characteristics of the airflow in the air gap of the contact, and the characteristics of the airflow flow. The results of the study show that the circuit breaker breakdown process generates a shock wave with a velocity approximately equal to the speed of sound under the same conditions. The maximum velocity of the airflow boundary diffusion is about 1/4 of the speed of sound under the same condition, and it decays very fast, reducing to the airflow drift velocity within 10ms after breakdown. The maximum temperature of the thermals is concentrated between 6000 and 8000 K and the temperature change is approximately inversely proportional to the square of time. The research provides the basis for the design of circuit breaker contact structure, opening speed optimization method, interrupter chamber and insulation design optimization.

Subglottal Impedance-Based Inverse Filtering (IBIF) allows for the continuous, non-invasive estimation of glottal airflow from a surface accelerometer placed over the anterior neck skin below the larynx, which has been shown to be advantageous for the ambulatory monitoring of vocal function. However, during long-term ambulatory recordings over several days, conditions may drift from the laboratory environment where the IBIF parameters were initially estimated due to sensor positioning, skin attachment, and temperature, among other factors. Observation uncertainties and model mismatch may result in significant deviations in the glottal airflow estimates, but are very difficult to quantify in ambulatory conditions due to a lack of a reference signal. To address this issue, we propose a Kalman filter implementation of the IBIF filter, which allows for both estimating the model uncertainty and adapting the airflow estimates to correct for signal deviations. One-way ANOVA results from laboratory experiments using the Rainbow Passage indicate a an improvement on amplitude-based measures for PVH subjects compared to IBIF which shows a statistically difference with respect to the reference oral airflow (p=0.02,F=4.1). MFDR from PVH subjects is slightly different to the oral airflow when compared to IBIF (p=0.04, F=3.3). Other measures did not have significant differences with either Kalman or IBIF, with the exception of H1H2, whose performance deteriorates for both methods. Overall, both methods show similar flottal airflow measures, with the advantage of Kalman by improving amplitude estimation. Moreover, Kalman filter deviations from the IBIF output airflow might suggest a better representation of some fine details in the ground-truth glottal airflow signal. Other applications may take more advantage from the adaptation offered by the Kalman filter implementation.

Computational rhinology is a specialized branch of biomechanics leveraging engineering techniques for mathematical modelling and simulation to complement the medical field of rhinology. Computational rhinology has already contributed significantly to advancing our understanding of the nasal function, including airflow patterns, mucosal cooling, particle deposition, and drug delivery, and is foreseen as a crucial element in e.g. the development of virtual surgery as a clinical, patient-specific decision support tool. The current paper delves into the field of computational rhinology from a nasal airflow perspective, highlighting the use of computational fluid dynamics to enhance diagnostics and treatment of breathing disorders. The paper consists of three distinct parts – an introduction to and review of the field of computational rhinology, a review of published literature on in vitro and in silico studies of nasal airflow, and the presentation and analysis of previously unpublished high fidelity CFD simulation data of in silico rhinomanometry. While the two first parts of the paper summarize the current status and challenges in the application of computational tools in rhinology, the last part addresses the gross disagreement commonly observed when comparing in silico and in vivo rhinomanometry results. It is concluded that this discrepancy cannot readily be explained by CFD model deficiencies caused by poor choice of turbulence model, insufficient spatial or temporal resolution, or neglecting transient effects. Hence, alternative explanations such as nasal cavity compliance or drag effects due to nasal hair should be investigated.

Drying grains in a fixed bed can be an interesting alternative to prevent undesirable breaks and fractures of solids due to mechanical shocks, something that cannot be avoided when drying in moving beds. A disadvantage of fixed bed drying is that there can be significant gradients in the critical variables if the layer of particulate solids is thick. This work shows that periodically changing the direction of drying air flow is an effective technique to reduce differences within the bed and allow better uniformity of the product. Drying in a thick layer of 10 cm of sorghum grains was carried out at 50 and 60oC for air flow velocity of 2.1 m.s-1. The results showed that despite increasing the total drying time, the technique actually allowed a significant decrease in the temperature gradients and moisture content of the sorghum grains. The change in direction of the air flow caused the drying front to be displaced, sometimes towards the top, sometimes towards the base of the bed. At 50oC, drying lasted a total of 240 min, bringing the sorghum grains to an average overall moisture content of 0.13 on a dry basis.

The application of naturally ventilated pig buildings (NVPBs) with outdoor exercise yards is on the rise mainly due to animal welfare considerations, while the issue of emissions from the buildings to the surrounding environment is important. Since air pollutants are mainly transported by airflow, the knowledge on the airflow characteristics downwind the building is required. The objective of this research was to investigate airflow properties downwind of a NVPB with a roofed outdoor exercise yard for roof slopes of 5°, 15°, and 25°. Air velocities downwind a 1:50 scaled NVPB model were measured using a Laser Doppler Anemometer in a large boundary layer wind tunnel. A region with reduced mean air velocities was found along the downwind side of the building with a distance up to 0.5 m (i.e. 3.8 times building height), in which the emission concentration might be high. It was found that a smaller roof slope (i.e. 5° slope) resulted in a higher and shorter wake zone and thus a shorter air pollutant dispersion distance. It was concluded that a smaller roof slope could contribute to the dilution of air pollutants and a lower air pollutant concentration near the ground.

This article presents an in-depth review of Virtual Power Plant (VPP), its organization in the energy system and its prospects in the face of the promising future of the increasing bidirectional complexity exposed in the current scenario. A new paradigm for the operations of modern power distribution and transmission systems requires greater grid flexibility that is accompanying an extensive change in the structure of electricity markets, the fruit of the development of the renewable industry and of the growing photovoltaic systems popularized, but in contrast due to the intermittent nature cause variable uncertainties in the power system. Innovative concepts like VPP are becoming a reality, establishing an efficient and effective mechanism. The objectives and components are described in a comprehensive way, and some of the most important are pointed out and presented in detail to contribute with a description of the energy systems and the implicit research needed for sustainability and resilience in the eminent energy scenario with this technology. In addition, the literature and studies of this technology already indicate a direction of this new tool as a promising solution to manage the uncertainties of the renewable energies.

In a context of increasingly necessary energy transition, precise modelling of profiles for low-voltage (LV) network consumers is crucial to enhance hosting capacity. Typically, load curves for these consumers are estimated through measurement campaigns conducted by Distribution System Operators (DSO) for a representative subset of customers or through the aggregation of load curves from household appliances within a residence. With the instrumentation of smart meters becoming more common, a new approach to modelling profiles for residential customers is proposed to make the most of the measurements from these meters. The disaggregation model estimates the load profile of customers on a low-voltage network by disaggregating the load curve measured at the secondary substation level. By utilizing only the maximum power measured by Linky smart meters, along with the load curve of the secondary substation, this model can estimate the daily profile of customers. For 48 secondary substations in our dataset, the model obtained an average symmetric mean average percentage error (SMAPE) error of 4.91% in reconstructing the load curve of the secondary substation from the curves disaggregated by the model. This methodology can allow the estimation of the daily consumption behaviors of the low-voltage customers. In this way, we can safely envision solutions that enhance the grid hosting capacity.

A sustainable smart tourism ecosystem relies on building digital networks that link tourists to destinations. This study explores how web and immersive technologies, such as the VRRO platform, can improve tourism by offering interactive experiences to augment traditional travel. The study underscores the role of VRRO's design in enhancing user interaction and engagement, thereby encouraging the generation of user content and the development of a virtual tour network. An empirical analysis investigates user engagement, revealing that the platform is accessible to users regardless of their technological familiarity. It suggests a high likelihood of sustained use and recommendations. In conclusion, VRRO demonstrates how accessible and innovative technologies in tourism modernize travel experiences and significantly contribute to the evolution of the broader tourism ecosystem.

The recent COVID-19 pandemic has showcased the implications of using virtual private networks (VPNs) as home-working is now common. Establishing the current state of knowledge on VPNs and their processes is vital. This corroborates an up to date understanding on the fundamentals of VPNs and their usage in today’s society; it informs on how to better use VPNs too. Insight into the security issues VPNs face and possible solutions to these allows for the identification of gaps for potential future research. Addressing these gaps would then indicate how to further improve VPNs, making sure VPNs are indeed beneficial to users.

The paper provides information on significant contamination of real laboratory water with hydrophilic microimpurities. This fact suggests that researchers are practically dealing with microdispersed systems. However, this fact is usually neglected in the discussions of the causes of the anomalous properties of water. We will show that, when exposed to various factors of physical nature, water demonstrates reactions of the same type, namely, increased pH and electrical conductivity, reduced redox potential and viscosity, and enhanced bioavailability. Each exposure is accompanied by the destruction of aggregates of the dispersed phase and its transition to a fine-dispersed state. The relationship between this phenomenon and the change in the physicochemical properties of water is discussed.

Appropriate techniques for promoting reading fluency are difficult to implement in the classroom. There is little time to provide students with individualized feedback on reading aloud or to moti-vate them to do so. In this context, VR can be beneficial for learning, to provide individualized feedback and for increasing learners' engagement. Studies analyzing established methods of lan-guage learning in school in VR seem to be lacking so far. Therefore, this study project was the first to analyze the acceptance of students towards the implementation of a concept of reading fluency training with students at a secondary school in VR. The study method was developed based on the Technology Acceptance Model. The VR environment developed is web-based and provides indi-vidual and collaborative opportunities for training reading fluency, giving, and receiving feed-back, and deepening content understanding of the reading texts. To analyze the acceptance of the VR environment, 5 guided interviews were conducted. The results show that despite technical challenges with the VR environment, students accepted and appreciated the reading fluency training in VR. The integration of established concepts of reading fluency training in foreign lan-guage classrooms has great potential as additional added value can be created to address the challenges of face-to-face instruction.

Virtual screening - predicting which compounds within a specified compound library bind to a target molecule, typically a protein - is a fundamental task in the field of drug discovery. Doing virtual screening well provides tangible practical benefits, including reduced drug development costs, faster time to therapeutic viability, and fewer unforeseen side effects. As with most applied computational tasks, the algorithms currently used to perform virtual screening feature inherent tradeoffs between speed and accuracy. Furthermore, even theoretically rigorous, computationally intensive methods may fail to account for important effects relevant to whether a given compound will ultimately be usable as a drug. Here we investigate the virtual screening performance of the recently released Gnina molecular docking software, which uses deep convolutional networks to score protein-ligand structures. We find, on average, that Gnina outperforms conventional empirical scoring. The default scoring in Gnina outperforms the empirical AutoDock Vina scoring function on 89 of the 117 targets of the DUD-E and LIT-PCBA virtual screening benchmarks with a median 1% early enrichment factor that is more than twice that of Vina. However, we also find that issues of bias linger in these sets, even when not used directly to train models, and this bias obfuscates to what extent machine learning models are achieving their performance through a sophisticated interpretation of molecular interactions versus fitting to non-informative simplistic property distributions.

Music cultural heritage, as an important component of cultural heritage, possesses significant cultural value and inheritance significance. With the development of society and the passage of time, these precious traditional music cultural heritages inevitably face the dilemma of gradual depletion or even disappearance. In the digital age, effectively protecting and inheriting these music cultural heritages has become an urgent problem to be addressed. Therefore, this paper proposes an application method based on digital twin technology, exploring how to protect and inherit music cultural heritages through digital twin technology. By leveraging digital twin technology, a virtual museum dedicated to showcasing the richness and historical connotations of music cultures is created, preserving and simulating the soundscapes of historical music eras. Through the integration of audio archives, 3D modeling, and interactive displays, users can immerse themselves in the experience of historical music in the digital space. This paper evaluates the feasibility and cultural preservation value of this digital music history museum through the creation of music digital twin technology instances and user survey feedback, and discusses the prospects of digital twins in the field of music cultural heritage.

The expansion of Open World Video Games (OWVGs) has seen the emergence of multiple new fictional worlds. This type of video game is characterized by total immersion in a world built for the players entertainment. What videogames developers want when players enter an OWVG is that they could feel like if they were open a door to an entirely new world and leave the real world behind. These virtual worlds manifest as a complement, an alternative, or the successor to the physical universe, and in some way continue the philosophical tradition of possible worlds begun by Leibniz. Accustomed to ‘surviving’ in hostile environments, millions of people continued to improve their skills in the midst of the COVID-19 pandemic while locked in their homes. Once the pandemic seems to start to be left behind, the paper analyzes the virtual worlds created by the video games and the relations between the pandemic and these fictional worlds.

Concrete is a heterogeneous material with a disordered material morphology that strongly governs the behavior of the material. In this contribution, we present a computational tool called the Concrete Mesostructure Generator (CMG) for the generation of ultra-realistic virtual concrete morphologies for mesoscale and multiscale computational modeling and simulation of concrete. Given an aggregate size distribution, realistic generic concrete aggregates are generated by a sequential reduction of a cuboid to generate a polyhedron with multiple faces. Thereafter, concave depressions are introduced in the polyhedron using gaussian surfaces. The generated aggregates are assembled into the mesostructure using a hierarchic random sequential adsorption algorithm. The virtual mesostructures are first calibrated using laboratory measurements of aggregate distributions. The model is validated by comparing the elastic properties obtained from laboratory testing of concrete specimens with the elastic properties obtained using computational homogenisation of virtual concrete mesostructures. Finally, a 3D-convolutional neural network is trained to directly generate elastic properties from voxel data.

Simulated crime scene investigation is an essential component of forensic science education, but its implementation poses challenges relating to cost, accessibility and breadth of experience. Virtual reality (VR) is an emerging technology which offers exciting prospects for teaching and learning, especially for imparting practical skills. We document here a multidisciplinary experimental study in which a bespoke VR crime scene app was designed and implemented, after which it was tested by both undergraduate student and staff/postgraduate student cohorts. Through both qualitative and quantitative analyses, we demonstrate that VR applications support learning of practical crime scene processing skills. VR-based practical sessions have the potential to add value to forensic science courses through offering cost-effective practical experience and the ability to work in isolation, in a variety of different scenarios. Both user groups reported high levels of satisfaction with the process and reports of adverse effects (motion sickness) were minimal. With reference to user feedback, we proceed to evaluate the scalability and development challenges associated with large-scale implementation of VR as an adjunct to forensic science education.

This paper investigates the effects of air void topology on hydraulic conductivity in asphalt mixtures with porosity in the range 14%-31%. Virtual asphalt pore networks were generated using the Intersected Stacked Air voids (ISA) method, with its parameters being automatically adjusted by the means of a differential evolution optimisation algorithm, and then 3D printed using transparent resin. Permeability tests were conducted on the resin samples to understand the effects of pore topology on hydraulic conductivity. Moreover, the pore networks generated virtually were compared to real asphalt pore networks captured via X-ray Computed Tomography (CT) scans. The optimised ISA method was able to generate realistic 3D pore networks corresponding to those seen in asphalt mixtures in term of visual, topological, statistical and air void shape properties. It was found that, in the range of porous asphalt materials investigated in this research, the high dispersion in hydraulic conductivity at constant air void content is a function of the average air void diameter. Finally, the relationship between average void diameter and the maximum aggregate size and gradation in porous asphalt materials was investigated.

This study investigates the impact of real-time emotional feedback on the quality of teamwork conducted over videoconferencing. We developed a framework that provides real-time feedback through a virtual mirror based on facial and voice emotion recognition. In an experiment with 28 teams (84 participants), teams collaborated over Zoom to set up a virtual Mars station using custom simulation software. Participants were divided into 14 experimental teams which were shown the virtual mirror, and 14 control teams without it. Team performance was measured by the improvement in the Mars simulation output quality. Our analysis using correlation, multilevel regression, and machine learning revealed that fewer interruptions but an increasing number over time correlated with higher performance. Higher vocal arousal and happiness also enhanced performance. We confirmed that female presence in teams boosts performance. SHAP values indicated that high variability in happiness, head movement, and positive facial valence—an “emotional rollercoaster”—positively predicted team performance. The experimental group outperformed the control group, suggesting that virtual mirroring improves virtual teamwork and that interrupting each other more, while speaking less, leads to better results.

In the field of robotics education, introductory courses would ideally utilize heavy industrial arms for hands-on learning. This would provide students with valuable experience in joint programming, which involves direct control of each joint motor in the arm to accomplish desired path planning and differential movements. This practice requires consideration of the physical dynamics of the arm. However, the use of heavy industrial arms has several drawbacks. They are large and expensive, require specialized maintenance, can pose safety risks, and they typically do not allow for direct control of the joint motors. One solution is to use a small, lightweight, toy-like arm. While these are cost-effective and provide direct access to the joint motors without posing safety risks, their lightweight construction means they exhibit minimal dynamic behavior, which limits their educational value. Another solution involves a robotic arm simulator that uses a virtual arm. However, a virtual arm doesn't offer the same level of hands-on engagement and excitement as a physical arm. We propose a hybrid solution that combines a small physical arm with a virtual arm. This approach provides students with the experience of working with an industrial arm, but without the associated difficulties. We demonstrate how this approach successfully improved the completion rate of joint programming assignments, offering a promising solution for practical robotics education.

This paper explores benefits of using VR technologies in higher education. Theoretical part investigates classical education system and its features in order to compare advantages of using VR systems in education. VR technologies and its current state in industry and in education were explored as well as which branches of higher education uses these systems. Survey was conducted through online questionnaire where respondents (N = 55) gave their opinion on VR and the implementation of VR technologies in education. Three hypotheses related to the use of VR technology, student interest, and learning outcomes as well as the effectiveness, immersiveness and the effect of VR systems on the users were tested through 27 questions.

This case study explores social media discourses of a virtual ecovillage community based in Central Romania, in a Hungarian speaking region of Transylvania. The investigated virtual community embraces the idea of ecovillage as a local constructive answer to the challenges of the global ecological crisis, based on strategies of revitalizing local ethnic traditions, promoting sustainable development solutions, and innovations. Our key question is the relationship between tradition and innovation—as revealed by the discursive practices of the ecovillage Facebook group most active members. Using ecolinguistic as a frame of reference, the investigation unveiled the role social media played in fostering the formation of a virtual intentional community, and in clarifying the shared values of the group. We found that the local ecovillage is part of a larger regional and global movement, unfolding the organic connection between the Hungarian and the Romanian intentional communities, and the reframing of traditional values within innovative, sustainable everyday practices.

Multidisciplinary neurotechnology holds the promise of understanding and non-invasively treating neurodegenerative diseases. In this preclinical trial on Parkinson's disease (PD), we combined neuroscience together with the nascent field of medical virtual reality and generated several important observations. First, we established the Oculus Rift virtual reality system as a potent measurement device for parkinsonian involuntary hand tremors (IHT). Interestingly, we determined changes in rotation were the most sensitive marker of PD IHT. Secondly, we determined parkinsonian tremors can be abolished in VR with algorithms that remove tremors from patients' digital hands. We also found that PD patients were interested in and were readily able to use VR hardware and software. Together these data suggest PD patients can enter VR and be asymptotic of PD IHT. Importantly, VR is an open-medium where patients can perform actions, activities, and functions that positively impact their real lives - for instance, one can sign tax return documents in VR and have them printed on real paper or directly e-sign via internet to government tax agencies. Lastly, we generated a technical framework wherein movements in the real world can be measured side-by-side with those in virtual reality. With this framework, we observed anecdotal evidence of parkinsonian tremors being reduced in real life when our algorithms abolished digital hand tremors in VR.

The past several decades have seen a shift in patient care towards digitalisation, which has ushered in a new era of health care delivery and improved sustainability and resilience of health systems, with positive impacts on both internal and external stakeholders. This study’s aim was to understand the role of digital virtual consultations in improving internal and external stakeholders’ health, as well as wellbeing among hospital doctors. A qualitative research approach was used with semi-structured online interviews administered to hospital doctors. The interviews showed that the doctors viewed digital virtual consultations as supplementary to in-person consultations, and as tools to reduce obstacles related to distance and time. If the necessary infrastructure and technology were in place, doctors would be willing to use these options. Implementing these technologies would improve the medical profession’s flexibility on the one hand; but it might affect doctors’ work–life balance if consultations extended beyond standard working hours.

Introduction: The combination of Virtual Screening (VS) techniques with in vivo screening in the zebrafish model is currently being used in tandem for drug development in a faster and more efficient way. Areas covered: We review the different virtual screening techniques, the use of zebrafish as a vertebrate model for drug discovery and the synergy that exists between them. Expert opinion: We highlight the advantages of combining virtual and zebrafish larvae screening for drug discovery. On the one hand, VS is a faster and cheaper tool for searching active compounds and possible candidates for therapy than in vivo screening when processing large compound libraries. On the other hand, zebrafish larvae form a vertebrate model which allows in vivo screening of large amounts of the compounds. Importantly physiology and chemical response are mostly conserved between zebrafish and mammals. The availability of the transgenic and mutant zebrafish lines allows an analysis of a specific phenotype upon treatment along with toxicity, off-target effect, side effects, and dosage. Advantages of VS, in vivo whole animal approach screening, and the screening combinations are also reviewed.

Human-Computer Interaction, including technology-aided instruction, is beginning to focus on virtual reality (VR) technology due to its ability to support immersive learning, teaching through simulation, and gamification of learning. These systems can deliver high-level multisensory learning experiences that are important in the teaching of many subjects, especially those involving abstract concepts or requiring spatial skills, such as organic chemistry. Haptic experiences with VR, however, remain a challenge. In addition, development have focused on general entertainment/gaming; VR systems in chemistry implement simulations of the chemistry laboratory and other advanced systems whereas those that support safe, game-like, immersive and multisensory learning of organic chemistry with haptics at pre-university education levels are scarce. We developed the VR Multisensory Classroom (VRMC) as an immersive learning environment within a VR head-mounted display, where learners employ hand movements to build hydrocarbon molecules and experience haptic feedback through gloves with built-in sensors and hand-tracking with the Leap Motion system. We report here the evaluation of the first prototype by learners from diverse backgrounds who reported on the ability of the VRMC to support high engagement, motivation, interest and organic chemistry learning as well as diverse learning styles. The VRMC is a novel VR classroom that supports immersive learning in molecular organic chemistry with haptics for multisensory learning.

With the emergence of new VR/AR technologies, the question arises of how they can be used in human-swarm interaction. Where are the limitations and boundaries of conventional interfaces, and how can VR/AR overcome them? To find out, a user study was conducted. The subjects were able to interact with an autonomously acting swarm of drones using both a conventional desktop interface (Desktop-HSI) and a newly developed VR interface (VR-HSI).The resulting assessments are used as a basis for determining the extent to which this new technology can be applied in human-swarm interaction. The technical basis was an already tested simulation software that was expanded with a network interface to allow interacting with a drone swarm using connected HSIs (Human-Swarm Interfaces). Standardized communication was emphasized to enable the development of HSIs with different requirements. Specifically for this work, a VR-HSI was developed with Unity and a desktop-HSI with Java and their performance regarding human-swarm interaction was evaluated.

Purpose: This study aims to analyze the factors that affect the behavior of user-defined avatars in different virtual environments, and compare the differences in public self-awareness, self-expression, and emotional expression among customized avatars in multiple virtual contexts. Methods: Using a between-subjects experimental design, two random groups of participants were asked to customize avatars for themselves in two contexts, a multiplayer online social game (MOSG) and a virtual meeting (VM). i.e. a relaxed and a serious social environment. Results: When subjects perceived a more relaxed environment, the customized avatars had less self-similarity, and the subjects exhibited a stronger self-disclosure willingness and enhanced avatar wishful identification; nevertheless, public self-consciousness was not increased. When subjects perceived a more serious environment, the customized avatars exhibited a higher degree of self-similarity, and the subjects exhibited a greater self-presentation willingness, along with enhanced identification of avatar similarity, and increased public self-consciousness. Conclusions: Participants expressed positive emotions, suggesting that avatars play a positive role in various virtual contexts. The virtual context affects the self-similarity of user-customized avatars, and avatar self-similarity affects self-presentation and self-disclosure willingness, and these factors will affect the behavior of the user-customized avatar. This study contributes suggestions to the Metaverse avatar customization platform design.

In the contemporary business world, digital transformations have undergone vast and important developments over the last several decades, and they have aided in the development of the virtual team concept, in which geographically dispersed team members work to achieve a common goal. Virtual teams, according to the literature, suffer from process losses more frequently than their face-to-face counterparts. Although just a few studies have looked at the effects of individual differences in virtual teams, this study fills in the gaps by examining the impact of individual differences: Age Disparity (AD), Gender Disparity (GD), Language Competency (LC), and IT Competency (ITC) in management perspective on virtual team adaptation in the Sri Lankan private sector. A survey was used to collect data from a sample of 175 private sector companies in Sri Lanka during the COVID- 19 pandemic, and the data was analyzed using partial least squares path modeling (PLS) to test the study's hypotheses. The results indicated that the hypotheses were statistically significant only in the language competency and IT competency and their effects were in the expected direction. Future research could benefit from perceptions of employees in public sector organizations.

Virtual Reality(VR) is an emerging technology with a broad range of application in training, entertainment, and business. To maximize the potentials of virtual reality as a medium, the unwelcome feeling of simulation sickness needs to be minimized. Even with advancements in VR, the usability concerns are barriers for a wide-spread acceptance. Several factors (hardware, software, human) play a part towards a pleasant VR experience. The reviewed scientific articles are mostly part of documents indexed in digital libraries. In this paper, we review the potential factors which cause simulation sickness and minimize the usability of virtual reality systems. We review the best practices from a developer’s perspective and some of the safety measures a user must follow while using the VR systems from existing research. Even after following some of the guidelines and best practices VR environments do not guarantee a pleasant experience for users. Limited research in VR environments towards requirement specification, design, and development for maximum usability and adaptability was the main motive for this work.

INTRODUCTION: With an increase in the aging population, the application of evidence-based practice in geriatric education can strengthen knowledge, skills, and clinical experience for healthcare students caring for older adults. Age Friendly Health Systems (AFHS) is one of the frameworks founded on providing evidence-based and low-risk care centered on what matters most to older adults, their families, and caregivers. Virtual Reality (VR) platforms are gaining popularity due to their ability to provide an immersive, hands-on learning experience resembling an actual medical practice or care setting. Immersive learning enhances students’ sensory perceptions, promoting an innovative and engaging way of acquiring concepts that are difficult to teach in real life. This study aimed to design, develop, implement, and evaluate a case-based training module highlighting AFHS and educating medical students on the 4Ms approach in geriatric care (What Matters, Medication, Mentation, and Mobility). METHODOLOGY: The project was a feasibility study completed in two phases. Phase one included planning and development of a case-based scenario incorporating 4Ms of AFHS. Phase two included implementing and evaluating the VR training module into the geriatric curriculum for medical students. RESULTS: The final VR case displays a hospital and post-acute setting where an elderly patient is admitted for a hip fracture. Students learn how to triage and treat patients from admission to discharge while demonstrating their knowledge of AFHS. Approximately 10% of students completed the evaluation survey, and preliminary results indicate significant knowledge change in pre-post scenario-based training on AFHS. CONCLUSION: The VR education platform and embedded scenario promise an innovative adaptation of technology in learning the concepts of the 4Ms of AFHS. However, future studies should explore VR education with clinical assessment evaluation to ensure competence in providing Age-Friendly care.

This study delves into the integration of Decentralized Finance (DeFi) within metaverses, probing its implications and potential. It elucidates DeFi protocols and the intricacies of metaverses before inspecting their intersection and the resulting economic prospects. The analysis further appraises inherent risks such as financial volatility, security, and regulatory issues. Case studies provide tangible insights into DeFi applications in metaverses. Future trajectories of DeFi in metaverses are projected, underlining the possible impact on the broader financial sector. This paper contributes to burgeoning research at the nexus of blockchain technology, finance, and virtual reality.

Background: This work presents Com@Rehab, a technological patient-centred activity for individuals needing a physical rehabilitation approach and with a specific loss of functionality. Within this scope, this paper focuses on the description of the activity in virtual reality (VR), its components, design and user profile, and its versatility and future adaptability regarding different ages, pathologies and rehabilitation contexts. Methods: The VR activity has been customised according to the patient's clinical needs while replicating an activity of daily living, namely showering. In addition, to validate and get feedback on the developed system, a validation questionnaire was applied to a group of healthy individuals to test the efficiency of the technology that supports the VR activity. Results: Preliminary results show that 94% of the participants recommended the experience, the performance of the various components of the system was successfully implemented, participants quickly adhered to the VR technology, and the UI assistant’s functionality should be improved. Conclusion: This solution creates a more effective, interactive, humanised rehabilitation approach based on a Virtual Reality (VR) activity. The Com@Rehab Communication Module improves human-human and human-machine communication while contributing to health literacy.

The use of active video games or exergames has been booming recently, as they are motivating and promote exercise and healthy lifestyle habits for their users, and these immersive virtual reality (IVR) exercise programs could be compared to traditional physical exercise programs. A starting point for this would be to explore the physiological responses that can be generated by its use. Therefore, the main objective of this study was to evaluate the response across certain physiological parameters (heart rate, blood pressure and stress) after an IVR exergame exposure in a sample of healthy adults, and secondarily to explore its feasibility and usefulness as a tool to facilitate physical exercise. 37 healthy adults (22-54 years, 54.1% women) participated in the study. They carried out one exergaming session with the HTC Vive ProTM hardware. The primary outcome was evaluated using the concentration of cortisol, heart rate and blood pressure. Secondary outcomes were evaluated with safety using the Simulator Sickness Questionnaire (SSQ); usability evaluated with the System Usability Scale (SUS); personal experiences evaluated with Game Experience Questionnaire (GEQ) and perceived exertion through the Borg perceived effort scale. All participants completed the IVR session without significant adverse effects, and all physiological parameters analysed increased significantly in relation to pre-intervention levels. Perceived exertion corresponded to a moderate to intense exercise (6.30±0.50/10 on the modified Borg scale). All the sample considered the experience as good or very good and would recommend it. These findings support that our IVR session can be compared to a moderate to intense physical activity, as it involved similar perceived exertion with significant increases in heart rate, blood pressure and salivary cortisol levels.

Virtual reality (VR) can play a key role in automotive marketing research, lowering costs and shortening the time it takes to bring a new product to market. However, there are still few VR applications that support automotive customers' experiences during the early stages of product development. Through a systematic review of literature and patents, this study aims to identify the challenges and opportunities for the application of virtual reality in car clinics, and to categorize them into attributes. We searched through the knowledge databases of PatentScout, ScienceDirect, Springer, and IEEEXplore. We found 72 patents with a high concentration in a few inventors. The United States of America presented the greatest number of records and the most common applications related to the apparatus for automatically reading respondents' reactions in a virtual environment. In terms of articles, we found 19 research papers that discussed sixteen categories identified as challenges and opportunities for automotive marketing research: 1) cost, 2) location to customers, 3) flexibility in interactions, 4) model transportation, 5) depth perception, 6) haptic perception, 7) motion, 8) movement perception/ physical collision, 9) color and texture, 10) sound feedback, 11) product interaction/manipulation, 12) visual-spatial, 13) graphic quality, 14) intuitiveness, 15) cybersecurity and 16) cybersickness. We conclude that the automotive industry can employ virtual reality for marketing research, but relevant elements such as hardware and software definition, stimulus quality, and research objectives, among others, must be considered.

Virtual reality (VR) describes a family of technologies which immerse users in sensorily-stimulating virtual environments. Such technologies have increasingly found applications in the treatment of neurological and mental health disorders. Depression, anxiety, and other mood abnormalities are of concern in the growing elderly population – especially those who reside in long-term care facilities (LTCFs). The transition from the familiar home environment to the foreign LTCF introduces a number of stressors that can precipitate depression. However, recent studies reveal that VR therapy (VRT) can promote positive emotionality and improve cognitive abilities in the elderly, both at home and in LTCFs. VR thus holds potential in allowing elderly individuals to gradually adapt to their new environments – thereby mitigating the detrimental effects of place attachment and social exclusion. Nevertheless, while the current psychological literature is promising, the implementation of VR in LTCFs faces many challenges. LTCF residents must gain trust in VR technologies, care providers require training to maximize the positive effects of VRT, and decision makers must evaluate both the opportunities and obstacles in adopting VR. Here, we concisely review the implications of depression related to place attachment in LTCFs, and explore the potential therapeutic applications of VR.

We discuss the implementation of a suite of virtual diagnostics at the FACET-II facility currently under commissioning at SLAC National Accelerator Laboratory. The diagnostics will be used for prediction of the longitudinal phase space along the linac, spectral reconstruction of the bunch profile and non-destructive inference of transverse beam quality (emittance) using edge radiation at the injector dogleg and bunch compressor locations. These measurements will be folded in to adaptive feedbacks and ML-based reinforcement learning controls to improve the stability and optimize the performance of the machine for different experimental configurations. In this paper we describe each of these diagnostics with expected measurement results based on simulation data and discuss progress towards implementation in regular operations.

G protein-coupled receptor 15 (GPR15, also known as BOB) is an extensively studied orphan GPCR involving HIV infection, colonic inflammation and smoking-related diseases. Recently, GPR15 was deorphanized and its corresponding natural ligand demonstrated an ability of inhibiting cancer cell growth. However, no study reported the potential role of GPR15 in a pan-cancer manner. Using large-scale publicly available data from the Cancer Genome Atlas (TCGA) and the Genotype-Tissue Expression (GTEx) databases, we found that GPR15 expression is significantly lower in colon adenocarcinoma (COAD) than in normal tissues. And among 33 cancer types, GPR15 expression is significantly correlated with the prognoses of COAD, neck squamous carcinoma (HNSC), lung adenocarcinoma (LUAD) positively and stomach adenocarcinoma (STAD) negatively. This study also revealed that commonly upregulated gene set in the high GPR15 expression group (stratified via median) of COAD, HNSC, LUAD and STAD are enriched in immune systems, indicating that GPR15 might be considered as a potential target for cancer immunotherapy. Furthermore, we modelled the 3D structure of GPR15 and conducted the structure-based virtual screening. The top 8 hits compounds were screened and then subjected to molecular dynamics (MD) simulation for stability analysis. Our study provided novel insights into the role of GPR15 in a pan-cancer manner and discovered a potential hit compound for GPR15 antagonists.

Some of the barriers preventing Virtual Reality (VR) from being widely adopted are the cost and unfamiliarity of VR systems. Here we propose that in many cases the specialized controllers shipped with most VR head-mounted displays can be replaced by a regular smartphone, cutting the cost of the system, and allowing users to interact in VR using a device they are already familiar with. To achieve this, we developed SmartVR Pointer, an approach that uses smartphones as a replacement for the specialized controllers for two essential operations in VR: selection and navigation by teleporting. In SmartVR Pointer a camera mounted on the head-mounted display (HMD) is tilted downwards so that it points to where the user will naturally be holding their phone in front of them. SmartVR Pointer supports three selection modalities: tracker-based,gaze-based, and combined/hybrid. In the tracker-based SmartVR pointer selection we use image-based tracking to track a QR code displayed on the phone screen and them map the phone’s position to a pointer shown within the field of view of the camera in the Virtual Environment. In the gaze-based selection modality the user places the pointer using their gaze and taps on the phone for selection. The combined technique is a hybrid between head-gaze-based interaction in VR and smartphone-based Augmented Reality. It allows the user to control a VR pointer that behaves like a mouse pointer by moving their smartphone to select objects within the virtual environment, and to interact with the selected objects using the smartphone’s touch screen. The touchscreen is used for selection and dragging. SmartVR Pointer is simple and requires no calibration and no complex hardware assembly or disassembly. We demonstrate successful interactive applications of SmartVR Pointer in a VR environment with a demo where the user navigates in the virtual environment using teleportation points on the floor and then solves a Tetris-style key-and-lock challenge.

Using the senses is essential to interact with objects in real-world environments. However, not all the senses are available when interacting with virtual objects in virtual environments. This paper presents a diamond methodology to fuse two technologies to represent the senses of sight and touch when interacting with a virtual object. The sense of sight is represented through augmented reality, and the sense of touch is represented through kinesthetic haptics. The diamond methodology is centered on the user experience and comprises five general stages: Experience design, Sensory representation, Development, Display, and Fusion. The first stage comes from the expected, proposed, or needed user experience. Then, each technology takes its homologous activities from the second to the fourth stage, diverging from each other along their development. Finally, the technologies converge to the fifth and final stage for fusion in the user experience. The diamond methodology was tested by generating a user's dual sensation when interacting with the elasticity of a tension virtual spring. The user can simultaneously perceive the visual and tactile change of the virtual spring during the interaction, representing the object's deformation. The experimental results demonstrated that an interactive experience can be felt and seen in augmented reality following the diamond methodology.

Internationalization and alternative ways for strategic management have been an objective for stakeholders in cultural industry, especially after COVID-19 pandemic crisis. During the past years “internationalization” has been almost exclusively related with promoting creation or content to larger audiences. Such a strategy seemed sufficient, even if empirical data did not always support such a belief. Technological progress and costs reduction in developing Virtual Reality (VR) and Augmented Reality (AR) applications, provides to cultural industry the opportunity to reach global audiences and to enrich their experience. Current research provides evidence about developing VR and AR tools that can act as internationalization facilitators when it comes to cultural industry. Research conducted during “VARSOCUL” project funded by the European Regional Development Fund (ERDF) as part of the Greek National Scope Action entitled "RESEARCH-CREATE-INNOVATE". The project’s main result, alongside with VR and AR tools developed are presented.

In the early stage of new vehicle development, the requirements of maximum performance of the air conditioning (AC) system are obtained through Amesim software simulation, but the calibration control of the AC system is usually carried out in the prototype-build vehicle test stage, and the test time is spanned up to 10 months after spring (autumn), summer and winter, of which up to 2 months are for environment chamber tests. Due to the long calibration cycle of AC control in the road test, which seriously affects the vehicle launch time, virtual calibration technology of air conditioning system is developed to shorten the calibration cycle of AC systems and ensure the quality of vehicles. In the project development stage, the calibration control of the vehicle AC system can be realized to carry out the functional test of the AC system in advance. In that, the grade of maturity for the AC system control can be improved, the on-road calibration test cycle can be shortened, and the development cost can be saved.

In this paper, a special recurrent neural network (RNN) called \emph{Long Short-Term Memory (LSTM)} is used to design a virtual load sensor that estimates the mass of heavy vehicles. The estimation algorithm consists of a two-layer LSTM network, with the two layers based on sequence-to-sequence and sequence-to-one logic, respectively. The network estimates the vehicle mass based on the vehicle speed, longitudinal acceleration, engine speed, engine torque, and the accelerator pedal position. The network is trained and tested with a data set collected in a high-fidelity simulation environment called Truckmaker. Training data is generated in acceleration maneuvers in a range of speeds whereas test data is obtained by simulating the vehicle in a Worldwide harmonized light vehicles test cycle (WLTC). Preliminary results show that, with the proposed approach, the heavy-vehicle mass can be estimated as accurately as commercial load sensors in a range of load mass as wide as four tons.

Zoom dysmorphia (ZD) is a facial dysmorphia triggered or aggravated by frequent virtual meetings. The frequent use of videoconferencing platforms has been linked to a distorted perception of facial images as individuals have an increased awareness of their appearance, given constant video feedback. As a result, dysmorphic concerns can develop. It is crucial to identify ZD as the condition interferes with the individual’s life and can trigger or aggravate body dysmorphic disorder (BDD). A standardized approach for screening ZD in non-psychiatric settings has yet to be defined. We discuss the features of ZD and the challenges of screening for ZD in a virtual setting. To facilitate the recognition of ZD in telehealth consultations, we propose a comprehensive ZD screening questionnaire that includes questions related to typical ZD features and a BDD-focused question. The questionnaire is concise and allows the identification of individuals with a potential ZD. A BDD assessment in such individuals should follow.

Oculomotor Dysfunctions (OMDs) are problems with eye-musculature relating to coordination and accuracy of eye movements. Eye-tracking (ET) technologies show great promise in the identification of OMDs. Current computer technologies for vision screening are specialized devices or laptop based technologies with limited by screen size and the inability to measure depth. In this experimental study, we examine the possibilities of immersive virtual reality (VR) technologies for increased user experiences, presence, immersiveness, and the use of serious games. Further results of an experimental study present increased interest in VR-based screening, its ability to focus better, and aspects motivating for its use, despite the actual limitations of current technologies. These limitations currently include lower performance and confidence in results of the used HMDs. Some users also describe being more focused when screening in VR, free from outside distractions. Using serious games for screening in VR is also estimated to have great potential for developing a more robust vision screening tool, especially for younger children.

We would like to suggest that, by considering three virtual gravitational constants assumed to be associated with gravitational, electromagnetic and strong interactions along with a strongly interacting virtual nuclear elementary charge, a workable model of final unification can be developed. In a verifiable approach, Newtonian gravitational constant and Fermi’s weak coupling constant can be interrelated via nuclear and electromagnetic gravitational constants.

The agricultural industry relies on physical fences to manage livestock. However, physical fences present some practical, financial, and ecological problems, that partly may be solved by virtual fencing. However, it is necessary for the livestock to be adapted to virtual fencing. This study aims to identify if adaptation to virtual fence can be improved through social facilitation between experienced cattle and the remaining herd. Moreover, which of the two different learning processes, a gradual or instant introduction to virtual fence is the most effective in associating warnings with impulses. Three pastures containing Angus (Bos taurus) will be used to examine these investigations; A, B and C. All investigations are conducted on the Danish Island of Fanø. Three methods of learning process were used, one gradual and two instant introductions to the virtual fence. The investigations had varying amounts of experienced cattle. Impulses and warnings were recorded during a learning period and the following observation period. To quantify if the cattle adapt to the warnings, impulses per warning are used. There was no evidence of improvement with the presence of experienced cattle for any pastures, indicating no social facilitation. Gradual introduction was found to be more beneficial than instant introduction. More standardized tests are necessary to discover the full effect of experienced cattle.

Virtual Reality (VR) can be useful in efforts that aim to improve wellbeing of older members of the society. Within this context, the work presented in this paper aims to provide to elderly a user-friendly and enjoyable Virtual Reality (VR) application incorporating memory recalling and storytelling activities that can promote mental awareness, so that negative side effects related to brain inactivity are prevented. An important aspect of the proposed VR application is the presence of a virtual audience that listens to the stories presented by elderly users, and interacts with the user. In an effort to maximize the impact of the VR application, research was conducted to study whether the elderly are willing to use the VR application and whether they believe it can help to improve well-being and reduce the effects of loneliness and social isolation. The results show that elderly users are positive towards the use of such an application in everyday life, as a means of improving their overall well-being.

Over the past few decades, digitalisation has pushed patient care towards a new era, inducing the evolution of health care delivery and enhancing the overall sustainability of health systems worldwide. Despite the ever-evolving technology leading to a change in health care provision, the uptake of these novel technologies by medical professionals is slow, largely because of concerns about the potential impact on patient care and patient safety, and medico-legal implications. Hence, this research aimed to understand doctors’ perceptions of the adoption of digital virtual consultations in the practice setting.In this survey, an online questionnaire, adapted from the construct by Venkatesh and Bala and based on the Technology Acceptance Model by Davis, was distributed to 886 hospital doctors. Altogether 133 responses were obtained.Results suggest that the respondents perceived digital virtual consultations as adjuncts to face-to-face consultations and as able to diminish time and place barriers. Doctors were willing in principle to utilise these alternatives to traditional methods if the appropriate infrastructure and technology were in place. Feasibility and cost-effectiveness studies are recommended to establish the technology-fit factor and the impact of the technology on the workforce, coupled with a stakeholder analysis to include all the actors involved in such a strategy.

A real-time flight simulation tool is proposed using a Virtual Reality Head-Mounted Display (VR-HMD) for airships operating in beyond the line-of-sight (BLOS) conditions. Particularly, the VR-HMD is developed for stratospheric airships flying at low/high altitudes. The proposed flight simulation tool uses the corresponding aerodynamics characteristics of the airship, the buoyancy effect, mass balance, added mass, propulsion contributions and ground reactions in the FlightGear Fight Simulator (FGFS). The VR headset has been connected to the FGFS along with the radio controller containing the real-time orientation/state of each button that is also simulated to provide better situational awareness and a Head-Up Display (HUD) that has been developed to provide the required flight data. In this work, a system was developed to connect the FGFS and the VR-capable graphics engine, Unity, to a PC and a wireless VR-HMD in real-time with minimal lag between data transmission. A balance was found for FGFS to write to a CSV file at a period of 0.01s. For Unity, the file was read every frame which translates to around 0.0167s (60 Hz). A test procedure was also conducted with a similar rating technique based on the NASA TLX questionnaire that identifies the pilot’s spare mental capacity when completing an assigned task to assure the comfortability of the proposed VR-HMD. Accordingly, a comparison has been made for the aircraft control using the desktop simulator and the VR-HMD tool. Results, showed that the current iteration of the system is ideal to train pilots on using similar systems in a safe and immersive environment. Furthermore, such an advanced portable system may even increase the situational awareness of pilots and allow them to complete a sizeable portion of actual flight tests with the same data transmission procedures in simulation. The resulting VR-HMD flight simulator is also conceived to express the ground control station (GCS) concept and transmit flight information as well as the point of view (POV) visuals in real-time using the real environment broadcasted using an onboard camera.

Previous research has either neglected to consider misbehaviour or misconduct in the virtual workplace during the current COVID-19 pandemic or highlighted some challenges encountered with remote working or work from home but in isolation, e.g., misbehaviours or ethical concerns associated with improper use of technology when accessing clients’ confidential information, without understanding their aetiology and context in a holistic manner. This has impacted the ability of existing research in providing recommendations organisations can practically implement to improve the sustainability and productivity of the virtual workplace, especially as they seek to navigate the current pandemic and prepare for the global business environment in the next decade. Instead, this study, for the first time, proposes a novel holistic methodology to identify the aetiologies of ethical and performance challenges with focus to the Information Technology consulting sector, as well as developing a set of recommendations companies can adopt to manage such behavioural and productivity challenges. Thus, this study illustrates the key issues associated with remote working implemented to respond to the current COVID-19 pandemic, which mine not only the individual performance in an organisation but also its overall productivity, as well as suggests the main performance and reward management strategies that can be leveraged to mitigate them. Tailored strategies are described and discussed as referred to this industry to help in navigating a more unstable yet competitive market to manage the virtual employees’ misbehaviours in the workplace and drive growth for individuals and organisations alike.

A framework for optimal sensor placement (OSP) for virtual sensing using the modal expansion technique and taking into account uncertainties is presented based on information and utility theory. The OSP maximizes a utility function that quantifies the expected information gained from the data for reducing the uncertainty of quantities of interest (QoI) predicted at the virtual sensing locations. The utility function is extended to make the OSP design robust to uncertainties in structural model and modelling error parameters, resulting in a multidimensional integral of the expected information gain over all possible values of the uncertain parameters and weighted by their assigned probability distributions. Approximate methods are used to compute the multidimensional integral and solve the optimization problem that arises. The Gaussian nature of the response QoI is exploited to derive useful and informative analytical expressions for the utility function. A thorough study of the effect of model, prediction and measurement errors and their uncertainties, as well as the prior uncertainties in the modal coordinates on the selection of the optimal sensor configuration is presented, highlighting the importance of accounting for robustness to errors and other uncertainties.

Sirtuins are nicotinamide adenine dinucleotide (NAD⁺)-dependent class III histone deacetylases and have been linked to the pathogenesis of numerous diseases such as HIV, metabolic disorders, neurodegeneration and cancer. Docking of the virtual pan-African natural products library (p-ANAPL), followed by in vitro testing, resulted in the identification of two inhibitors of sirtuin 1, 2 and 3 (sirt1-3). Two bichalcones; rhuschalcone IV (8) and rhuschalcone I (9), previously isolated from the medicinal plant Rhus pyroides, were shown to be active in the in vitro assay, with rhuschalcone I showing the best activity against sirt1, having an IC₅₀ = 40.8 µM. Based on the docking experiments, suggestions for improving the biological activities of the newly identified hit compounds have been provided.

This review explores the integration of Virtual and Mixed Reality in medical training. The advent of immersive technologies has revolutionized traditional methodologies, offering immersive, interactive, and flexible learning environments. This study aims to assess the impact, efficacy, and potential of Extended Reality (XR) in medical education. Methods included a comprehensive analysis of current Metaverse’s applications in various medical fields, including surgery, diagnostics, and patient care. Results indicate a significant enhancement in learning outcomes, practical skills, and student engagement. Conclusions suggest that Virtual Reality is a valuable tool for medical training, providing realistic simulations and improving both theoretical knowledge and practical skills. The intersection of virtual reality and cognitive neuroscience presents an exciting frontier for understanding the human brain's response to immersive environments. This review explores how VR impacts learning, with a particular focus on the activation and engagement of the prefrontal cortex during immersive experiences. It delves into various studies that highlight the transformative potential of VR in educational settings and therapeutic applications, demonstrating how VR can facilitate deeper and more effective learning experiences. The review will present a dedicated section on the current methodologies used to analyze the brain's response while immersed in a virtual environment.

The International Maritime Organization (IMO) is enforcing increasingly stringent regulations on ship carbon emissions, The International Maritime Organization (IMO) has been implementing progressively strict regulations on ship carbon emissions, leading to the adoption of the virtual arrival (VA) method by many vessels to reduce their carbon footprint. However, the effectiveness of the traditional VA method often varies in busy ports with complex traffic organization scenarios. To address this, our study presents a novel, comprehensive model that integrates vessel scheduling with the VA approach. This model is designed to achieve a dual objective: reducing carbon emissions through Virtual Arrival and simultaneously minimizing vessel waiting times. In addition to these goals, it incorporates essential aspects of safety, efficiency, and fairness in port management, utilizing the NSGA-2 algorithm to find optimal solutions. This model has been tested and validated through a case study at Ningbo-Zhoushan port, employing its dataset. The results demonstrate that our innovative model and algorithm significantly outperform traditional scheduling methods, such as First-Come-First-Serve (FCFS) and Virtual-Arrival Last-Serve (VALS), particularly in terms of operational efficiency and reduction in vessel carbon emissions.

Vein blood sampling is one of the methods of mass blood sampling, and is an act of drawing blood from a vein for blood type discrimination, confirmation of various physiological indicators, disease diagnosis, and the like, and is the most commonly used blood sampling method. An important point in vein blood sampling is to search for the exact location of the vein and insert the blood sampling. This is influenced by the patient's obesity, skin and blood vessel conditions, and the experience of the clinical technologist, nurse, and resident who performs the blood sampling. It is required to perform blood sampling technique practice. However, due to many limitations of the practice room or laboratory, there is a problem of using only a limited environment and model for clinical practice. As a result, many medical educational institutions have situations in which only fragmentary clinical practices are performed, and it is difficult to per-form a large number of blood sampling skills practices, so they do not provide enough experience to understand the actual skill field. In this paper, we propose a method for developing a virtual reality-based vein blood sampling simulator to practice a large number of blood sampling techniques without restrictions. The proposed vein blood sampling simulator can operate a 3D model related to vein blood sampling using HMD Controller and Haptic in a virtual space for vein blood sampling practice by wearing an HMD (Head mounted display), and can perform vein blood sampling practice through interaction with the patient 3D model. there is. In addition, the effectiveness of the simulator developed for dental students was verified, and as a result of the verification, the potential of the proposed vein blood sampling simulator was confirmed.

The case of a virtual bosonic scalar field phi(x) gravitationally coupled in a conformally flat spacetime is investigated. The action S is known to be Weyl invariant only for specific expressions of the potential V(phi). In the conformally flat FLRW case the harmonic angular frequency omega_k(eta) becomes uniquely temporally independent. Therefore any inertial observers embedded in a conformally flat FLRW spacetime all agree on the choice of virtual vacuum states. We postulate that the wavenumber k must be quantized in order to be able to regulate the vev by zeta regularization. Some fundamental implications of this result is derived, and likely conclusions drawn.

Seniors safety is a compelling need, which necessitates 24/7 real-time monitoring and timely dangerous action recognition. Being able to mirror characteristics of physical objects (PO) to corresponding logical objects (LO) and seamlessly monitor their footprints thus detect anomaly parameters, Digital Twins (DT) has been considered a practical way to provide virtual health services for seniors safety. Meanwhile, widely adopted Internet of Medical Things (IoMT) consisting of wearable sensors and non-contact optical cameras for self and remote health data monitoring also raises concerns on information security and privacy violation. Therefore, security of POs, LOs and reliable data sharing among healthcare professionals are challenging as constructing trust and privacy-preserving virtual health services. Thanks to characteristics of decentralization, traceability and unalterability, Blockchain is promising to enhance security and privacy properties in many areas like data analysis, finance and healthcare. This paper envisions a lightweight authentication framework (LAF) to enable secure and privacy-preserving virtual healthcare services. Leveraging Non-Fungible Token (NFT) technology to tokenize LOs and data streams on blockchain, anyone can certify the authenticity of a digital LO along with its synchronized data between PO without relying on a third-party agency. In addition, the NFT-based tokenization not only allows owners fully control their IoMT devices and data, but it also enables verifiable ownership and traceable transferability during data sharing process. Moreover, NFT only contains references to encrypted raw data that are saved on off-chain storage like local files or distributed databases, such a hybrid storage strategy ensures privacy-preservation for sensitive information. A proof-of-concept prototype is implemented and tests are conducted on a case study of seniors safety. The experimental evaluation shows the feasibility and effectiveness of the proposed LAF solution.

The dark energy from virtual gravitons is consistent with observational data on supernova with the same accuracy as the CDM model. The fact that virtual gravitons are capable of producing of a de Sitter accelerated expansion of the FLRW universe was established in 2008 (see references). The combination of conformal non–invariance with zero rest mass of gravitons (unique properties of the gravitational field) leads to the appearance of graviton dark energy in a mater-dominated era. Тhis fact explains the relatively recent appearance of the dark energy and answers the question “Why now?”. The transition redshifts (where deceleration is replaced by acceleration) that follow from the graviton theory are consistent with model independent transition redshifts derived from observational data. Prospects for testing the GCDM model (the graviton model of dark energy where G stands for gravitons) and comparison with the CDM model are discussed.

Plasmodium species that cause malaria, a disease responsible for about half a million deaths per annum despite concerted efforts to combat it. The causative agent depends on type III beta phosphatidylinositol 4-kinase (PPI4K) during the development of merozoite. PPI4K is the only clinically validated Plasmodium kinase so far and its inhibitors are effective both in vitro and in vivo. In this work, a small library of ~22 000 fragments was virtually screened using PPI4K homology model to discover potential ligands of the enzyme. 16 virtual hits were selected based on ≤ -9.0 kcal/mol binding energy cut off and were subjected to similarity and substructure searching after they had passed PAINS screening. The derivatives obtained showed improved binding energies, which ranged from -10.00 to -13.80 kcal/mol. Moreover, the topmost ranking compound 31, with interesting drug-like quality was stable within the protein’s binding cavity during the 10 ns molecular dynamics simulation period. In addition, analysis of its binding pose revealed some unique binding interactions with PPI4K active site residues as the basis for the observed improved binding affinity. Overall, compound 31 appears to be a viable starting point for the development of PPI4K inhibitors with antimalarial activity.

The development of microbial products for cancer treatment has been in the spotlight in recent years. In order to accelerate the lengthy and expensive drug development process, in silico screening tools are systematically employed, especially during the initial discovery phase. Moreover, considering the steadily increasing number of molecules approved by authorities for commercial use, there is a demand for faster methods to repurpose such drugs. Here we present a review on virtual screening web tools, publicly available databases of molecular targets and libraries of ligands, with the aim to facilitate the discovery of potential anticancer drugs based on microbial products. We provide an entry-level step-by-step description of the workflow for virtual screening of microbial metabolites with known protein targets, as well as two practical examples using freely available web tools. The first case presents a virtual screening study of drugs developed from microbial products using Caver Web, a web tool that performs docking along a tunnel. The second case comprises a comparative analysis between a healthy isocitrate dehydrogenase 1, a mutant that results in cancer, using the recently developed web tool PredictSNP^Onco. In summary, this review provides the basic and essential background information necessary for virtual screening experiments, which may accelerate the discovery of novel anticancer drugs.

The explosion of data has transformed the world since much more information is available for collection and analysis than ever before. To extract valuable information from the data in different dimensions, various deep learning models have been developed in the past years. Although these models have demonstrated their strong capability on improving products and services in various applications, training them is still a time-consuming and resource-intensive process. Presently, cloud, one of the most powerful computing infrastructures, has been used for the training. However, how to manage cloud computing resources and to perform the training efficiently is still challenging current techniques. For example, general resource scheduling approaches, such as spread priority and balanced resource schedulers, actually do not work well with deep learning workloads. Besides, the resource allocation problem on a cluster can be divide into two subproblems: (1) local resource optimization: improve resource configuration for a single machine; (2) global resource optimization: improve the cluster-wide resource allocation. In this thesis, we propose two novel container schedulers, FlowCon and SpeCon, that are designed to address these two subproblems respectively and specifically to optimize performance of short-lived deep learning applications in the cloud. FlowCon focuses on resource configuration of single-node in a cluster, as show that it efficiently improves deep learning tasks completion time and resource utilization, and reduces the completion time of a specific job by up to 42.06\% without sacrificing the overall system time. SpeCon targets on cluster-wide resource configuration that speculatively migrate slow-growing models to release resources for fast-growing ones. Based on our experiments, SpeCon improves makespan for up to 24.7\%, compared to current approaches.

The commercial popularity of Virtual Reality attracted educators’ interest and brought new opportunities to the educational landscape. At the same time, Learning Analytics emerged with the promise to revolutionise the traditional practices by introducing ways to systematically assess and improve the effectiveness of instruction. However, the collection of ‘big’ educational data is mostly associated with web-based platforms as they offer direct access to learners’ activities with minimal effort. On the antipode, the nature of VR limits the opportunities for such data collection. Hence, in the context of this work, we present a four-dimensional theoretical framework, that accounts the information that can be gathered from VR-supported instruction, and propose a set of structural elements which can be utilised for the development of a Learning Analytics prototype system. The outcomes of this work are expected to support practitioners to maximise the potential of their interventions and provide inspiration for new ones.

SARS-CoV-2 is the betacoronavirus responsible for the COVID-19 pandemic. It was listed as a potential global health threat by WHO due to high mortality, high basic reproduction number and lack of clinically approved drugs and vaccines for COVID-19. The genomic sequence of the virus responsible for COVID-19, as well as the experimentally determined three dimensional structure of the Main protease (Mpro) are available. The reported structure of the target Mpro was utilized in this study to identify potential drugs for COVID-19 using molecular docking based virtual screening of all approved drugs. The results of this study confirm preliminary reports that some of the drugs approved for treatment of other viral infections have the potential for treatment of COVID-19. Selected antiviral drugs, approved for human therapeutic applications, were ranked for potential effectiveness against COVID-19, based on predicted binding energy to the target Mpro of SARS-CoV-2, and novel candidates for drug repurposing were identified in this study. In addition, potential mechanisms for beneficial off target effects of some drugs in clinical trials were identified by using molecular docking.

Due to their strong immersion and real-time interactivity, helmet-mounted VR devices are becoming increasingly popular. Based on these devices, an immersive virtual geographic environment (VGE) provides a promising method for research into crowd behavior in an emergency. However, the current cheaper helmet-mounted VR devices are not popular enough and will continue to coexist with PC-based systems for a long time. Therefore, a heterogeneous distributed virtual geographic environment (HDVGE) could be a feasible solution to solve the heterogeneous problems caused by various types of clients, and support implementation of virtual crowd evacuation experiments, with large numbers of concurrent participants. In this study, we developed an HDVGE framework and put forward a set of design principles to define the similarities between the real world and the VGE. We discussed the HDVGE architecture and proposed an abstract interaction layer, a protocol-based interaction algorithm and an adjusted dead reckoning algorithm to solve the heterogeneous distributed problems. We then implemented an HDVGE prototype system focusing on subway fire evacuation experiments. Two types of clients are considered in the system, PC and all-in-one VR. Finally, we evaluated the performances of the prototype system and the key algorithms. The results showed that in a low-latency LAN environment, the prototype system can smoothly support 90 concurrent users consisting of PC and all-in-one VR clients. HDVGE could serve as a new means of obtaining observational data about individual and group behavior in support of human geography research.

Objectives: Aim to assess the perceptions of virtual learning among dental residents and faculty and employ Regulatory Focus Theory (RFT) to understand the impact of motivational orientations on virtual learning during COVID pandemic. Methods: 46 dental residents and 10 faculty in Upstate New York participated in the study (June -August 2021). Questionnaires were used to collect demographics, perceptions of virtual learning, burnout, and RFT types (promotion and prevention focus). Multiple regression analyses were used to examine factors associated with perceptions of virtual learning and burnout. Results: Overall, 70% of residents and 44% of faculty found virtual learning effective. Younger residents with less experience preferred virtual learning more than their older, experienced peers. Residents trained outside the U.S. and Canada favored in-person learning more than those trained within. Furthermore, residents with a higher promotion focus score found virtual learning more interactive for didactic courses. Additionally, 52% of residents experienced burnout, with a higher incidence among females (p=0.044). Conclusions: Virtual learning is well-received by dental residents and faculty, with potential for continued use post-pandemic. Future efforts should focus on creating an inclusive and supportive educational environment that meets the motivational and well-being needs of dental residents and faculty.

Therapies targeting amyloid, such as monoclonal antibodies like Lecanemab, Aducanumab, and Donanemab, have garnered FDA approval but remain controversial due to limited clinical benefits and significant side effects against Alzheimer. The present theorical work utilized Virtual Screening and Docking techniques to explore potential small natural molecules' interactions with the KIBRA protein, a promising target for drug development. Kibra protein is considered a biomarker for synaptic dysfunction and cognitive decline. Employing Autodock Vina and Pyrx software, on several natural compounds and found Hypericin to exhibit the lowest binding energy of approximately -9 kcal/mol. Previous studies have highlighted Hypericin's strong affinity for Alzheimer's Disease-associated targets like ABAD and BACE1. These findings suggest Hypericin could be as a potential therapeutic agent for Alzheimer's Disease. Further research is warranted to validate its efficacy and safety for clinical use.

This research hypothesised that the use of Virtual Reality (VR) applications can be used to train people in the ability to acquire targets faster, with greater accuracy when using motion controllers than compared with a traditional pointing device (mouse) on a 2D display. User performance was defined and measured using Reaction Time and Accuracy. The research findings suggests that the use of motion controllers in VR improved Reaction Time but not Accuracy when compared against the traditional pointing device and 2D display. This suggests that VR can be used specifically in training scenarios where Reaction Times are more important than Accuracy. It is recommended that further research is conducted using a wider range of hardware and software configurations with a stratified sample that takes into account age and gender to expand the collective understanding of factors that impact on VR aiming and target acquisition in VR.

Due to the unanticipated, forced migration of classroom activities to a fully remote format because of the coronavirus pandemic, there is a critical need for progress in the online education system. Not only that, but online education is the way of the future, and its infrastructure must be enhanced for teaching and learning to be effective. Engaging the students and enhancing their focus is one of the major concerns in the current video calling-based system. In this research, we propose a VR and AR-based virtual classroom environment system called "Edu VR" which encourages students to learn with a high level of involvement and attentiveness. We have divided the system into 2 distinct categories. one amongst which incorporates the virtual reality classroom, wherever the students can have a similar feel of actual school with peer-to-peer-based interactions and student-to-teacher interactions with Unity3D. We are able to conjointly deploy AR models with Vuforia, which permits the teachers to take classes more efficiently with student’s engagement. The other category involves the AI-based classroom assessment system, which enables teachers to produce assessments, which in turn are proctored by Artificial Intelligence. The results are automatically sent to the student within a short period, with the assistance of text similarity analysis for evaluating the answer scripts with Machine learning. This approach solves the drawbacks of video call-based systems with enhanced focus and engagement.

The application of Virtual Reality in a driving simulation is not novel, yet little is known about the use of this technology by senior populations. The effects of age, sex, control device (joystick or handlebar), and task type on wayfinding proficiency using a virtual reality (VR) driving simulation were explored. The driving experimental model involved 96 randomly recruited participants, including 48 young people and 48 seniors (split evenly by gender in each group). The experimental results and statistical analyses indicate that in a VR driving scenario task type significantly affected VR driving performance. Navigational scores were significantly higher for the straight (easy) task than for the curved (difficult) task. The aging effect was the main reason for significant and interacting effects of sex and control device. It was found that interactions between age and sex difference indicated that the young group exhibited better wayfinding performance than the senior group, and in the young group males had better performance than females. Similarly, interactions between age and control device indicated that the handlebar control device type resulted in better performance than the joystick device in the young group, but no difference was found in the senior group due to age or learning effects. Findings provide an understanding of the evaluation of the interface designs of navigational support systems, taking into consideration any effects of age, sex, control device, and task type within three-dimensional VR games and driving systems. With a VR driving simulator, seniors can test drive inaccessible products, such as electric bicycles or cars, using a computer at home.

Coronavirus disease 2019 (COVID-19) has been first appeared in Wuhan, China but its fast transmission, led to its widespread prevalence in various countries and make it a global concern. In addition, lack of a definitive treatment is another concern that needs to be attention. Researchers have come up with several options, which are not certain, but protease inhibitor and some antiviral agent are in the forefront. In this study a virtual screening procedure employing docking of different databases including 1615 FDA approved drugs was used to identify new potential small molecule inhibitors for protease protein of COVID-19. The docking result indicates that among all, simeprevir (Hepatitis C virus (HCV) NS3/4A protease inhibitor) could fit well to the binding pocket of protease and because of some other positive features including ADME profile, might be a helpful treatment option for COVID-19.

Virtual Histology- Intravascular Ultrasound (VH-IVUS) image is an available method for visualizing plaque component to detect thin cap fibroatheroma. Nevertheless, this imaging modality has considerable limitations to extract the plaque component features and identifying the TCFA plaque. The aim of this paper is to improve the identification of TCFA using fusion of IVUS and VH-IVUS images. In order to generate the automatic technique for reducing the human interaction, a new method namely Active Contour based Plaque Border Detection (ACPB) is proposed. In order to perform the pixel wise classification, hybrid of K-means algorithm with Particle Swarm Optimization and Plaque based Minimum Euclidean Distance (KMPSO-PMED) method is presented to classify the plaque region as well. Moreover, to obtain more significant information of imaging modalities, fusion of two different images consisting of VH-IVUS and IVUS is performed. Therefore, geometric features are extracted from the plaque region and combine with IVUS features. Furthermore, different group of plaque features are divided by means of the histopathological studies. SVM classifiers is applied to detect the TCFA and non-TCFA plaques. The proposed method is applied on 566 in-vivo IVUS and their matching VH-IVUS images obtained from 9 patients. The best result of SVM illustrates the accuracy rates of 99.41% for classification of TCFA plaque. The results prove that the highest accuracy is achieved by integrated features of IVUS and VH-IVUS images.

With advances in Building Information Modeling (BIM), Virtual Reality (VR) and Augmented Reality (AR) technologies have many potential applications in the Architecture, Engineering, and Construction (AEC) industry. However, the AEC industry, relative to other industries, has been slow in adopting AR/VR technologies, partly due to lack of feasibility studies examining the actual cost of implementation versus an increase in profit. The main objectives of this paper are to understand the industry trends in adopting AR/VR technologies and identifying gaps within the industry. The identified gaps can lead to opportunities for developing new tools and finding new use cases. To achieve these goals, two rounds of a survey at two different time periods (a year apart) were conducted. Responses from 158 industry experts and researchers were analyzed to assess the current state, growth, and saving opportunities for AR/VR technologies for the AEC industry. The findings demonstrate that older generations are significantly more confident about the future of AR/VR technologies and they see more benefits in AR/VR utilization. Furthermore, the research results indicate that Residential and commercial sectors have adopted these tools the most, compared to other sectors and institutional and transportation sectors had the highest growth from 2017 to 2018. Industry experts anticipated a solid growth in the use of AR/VR technologies in 5 to 10 years, with the highest expectations towards healthcare. Ultimately, the findings show a significant increase in AR/VR utilization in the AEC industry from 2017 to 2018.

Technology can be seen everywhere and has been integrated into our lives.We are always using technology and enjoying the convenience brought by technology. However, physical retailers and e-commerce companies are also gradually adopting advanced technologies. Technology improves the purchasing environment and purchasing experience. Virtual reality and augmented reality have been hotly discussed in recent years. Technology, although virtual reality and augmented reality technology have not yet matured, it can be said that they will in the future It has great development potential. Virtual reality and augmented reality are also beginning to sprout in the retail industry. However, research on the acceptance of the use of virtual reality and augmented reality in the apparel shopping process is still lacking because This study explores how usefulness, ease of use, hedonicity, customer experience, customer engagement and satisfaction. To influence customer loyalty, this study adopted questionnaire survey and convenience sampling methods, and collected a total of 308 valid questionnaires. The analysis method used confirmatory factor analysis and structural equation model to verify the research hypothesis relationship. The results of this study found. Hedonic has a significant impact on customer loyalty, while usefulness, ease of use, customer experience, customer engagement and satisfaction Satisfaction does not have a significant impact on customer loyalty. This study explains the academic contribution of the research results. The practical implications in marketing are put forward, and specific suggestions and directions for future research are given.

This study explored the incidence of metaphorical virtual classrooms and interactive learning objects in the interaction of students in online mode. The main objective was to analyze how these digital tools, driven by a set of strategies to promote their use, affect the interaction of students in the virtual classroom system and their derived effects. To this end, the latest version of Moodle was implemented in conjunction with gamification plugins and interactive tools in the higher education institution used as a case study. The methodology consisted of data collection through ordinal instruments applied to the teachers and student performance metrics gathered using a plugin developed to extract accurate metrics of each student's usage and performance through direct queries to the Moodle database and its processing through a neural network. This facilitated the collection of standardized data on the actual metrics of each virtual classroom at the end of the teaching of each subject from both the previous LMS and the newly implemented one. This data was then analyzed using advanced statistical techniques, including Mahalanobis distances, confirmatory factor analysis, and the Wilcoxon signed-rank test. These methods provided a compelling comparison between the old and new systems, revealing significant improvements in the metrics and factors evaluated. The results showed a significant improvement in teachers' perceptions of the usability of the virtual classroom system and an increase in students' academic performance, interaction, progress, and time spent learning in virtual contexts. These results provide solid empirical evidence of the added value of these educational tools as effective strategies for improving student interaction, performance, and motivation in online education.

Smart grid capabilities have grown significantly in recent years. The smart grid provides advanced real-time handling of faults, advanced automatic control for efficient electricity transmission, monitoring and collection of the electrical system's capacity, and communication for information sharing. Unfortunately, its exposure to public networks makes it increasingly vulnerable to privacy breaches, vulnerabilities, and cyber-attacks. Cyber security threats and vulnerabilities in smart grid networks have become a primary concern that needs to be addressed before deploying a smart grid. Furthermore, the wide range of protocols increases the attack surface of a smart grid. This study focuses on the vulnerability of Modbus, which is regarded as one of the most prevalent protocols in smart grid communication networks. This paper presents preliminary findings of analyzing cyber-attacks against the Modbus protocol using a virtual testbed to investigate its effects on the smart grid network protocol. The concept incorporates an emulated Modbus/TCP network environment built from open-source software components that imitate fundamental industrial control features of the smart grid. Finally, we analyze the cycle of a cyber-attack leading through Reconnaissance to a DoS attack on the Modbus/TCP protocol and propose improvements to the test bed for protocol attack detection and mitigation.

Cancer is a multifactorial disease that continues to increase. Lignans are known to be important anticancer agents. However, due to the structural diversity of lignans, it is difficult to associate anticancer activity with a particular subclass. Therefore, the present study sought to evaluate the association of lignan subclasses with antitumor activity, considering the genetic profile of the variants of the selected targets. For this, predictive models were built against the targets tyrosine-protein kinase ABL (ABL), epider-mal growth factor receptor erbB1 (EGFR), histone deacetylase (HDAC), Serine/threonine-protein kinase mTOR (mTOR) and Poly [ADP-ribose] polymerase-1 (PARP1). Then, mapped single nucleotide polymorphisms and designed target mutations, and performed molecular docking with the lignans with the best predicted biological activity. The results showed more anticancer activity in the dibenzocyclooctadiene, furofuran and aryltetralin subclasses. The lignans with the best predictive values of biological activity showed varying binding energy results in the presence of certain genetic variants.

The Virtual Blade Model (VBM) is the implementation of the Blade element model (BEM). This was done by coupling the Blade Element Momentum theory equations to simulate rotor operation with the Reynolds Averaged Navier-Stokes (RANS) equation to simulate rotor wake and the turbulent flow field around it. Exclusion of actual geometry of blades causes lower computational cost (about 10 to 100 times). Also, due to simplifications in the meshing procedure, VBM is easier to set up than the models that consider the actual geometry of blades. One of the main unaddressed limitations of the VBM code was the constraint of modeling up to ten rotor zones within one computational domain. This paper provides a detailed and well-documented general methodology to develop a virtual blade model for simulation of ten-plus turbines within one computational domain to remove the limitation of this widely used and robust code. It is strongly believed that the technical contribution of this paper, combined with the current sky-rocketing advancement of available computational resources and hardware, would open the gates to simulate various engineering problems in the field of aerospace, clean energy, and many more.

This work presents the results of a computational study of the chemical reactivity and bioactivity properties of the members of the Theopapuamides A-D family of marine peptides by making use of our own proposed methodology named Computational Peptidology (CP) that has been successfully considered in previous studies of this kind of molecular systems. CP allowed for the determination of the global and local descriptors that come from Conceptual Density Functional Theory (CDFT) that can give an idea of the chemical reactivity properties of the marine natural products under study which are already known to be related to their bioactivity. At the same time, the validity of the procedure based on the adoption of the KID (Koopmans in DFT) technique as well as the MN12SX/Def2TZVP/H2O model chemistry has been successfully verified. Together with several Chemoinformatic tools that can be used for the improvement of process of Virtual Screening, some additional properties of these marine peptides were identified related to their ability to behave as useful drugs. With the further object of analyzing their bioactivity some parameters of usefulness for future QSAR studies, their predicted biological targets and the the ADMET (Absorption, Distribution, Metabolism, Excretion and Toxicity) parameters related to the Theopapuamides A-D pharmacokinetics are also reported.

The rising popularity of virtual reality has seen a recent push in applications, such as, social media, educational tools, medical simulations, entertainment and training systems. With virtual realitythe ability to engage users for specific purposes, provides opportunities to entertain, develop cognitive abilities and technical skills outside of the standard mediums (e.g., the television or theclassroom) thereby optimizing exposure with realistic (live) opportunities. However, before these applications of virtual reality become more widespread, there are a number of open questions andissues that must be addressed including limitations, challenges, relationships between fidelity, multi-modal cue interaction, immersion, and knowledge transfer and retention. In this article, we begin with a brief overview of virtual reality methods, followed by a discussion of virtual reality and its applications (both historically, currently and in the future). We review virtual reality trends both from the early artistic days through to current day state of the art technological advancements. We explore emerging and futuristic breakthroughs - and their applications in virtual reality - showing how virtual reality will go way beyond anything we could envision. Infact, after reading this article, we hope the reader will agree, that virtual reality, is possibly one of the most powerful mediums of our time. While the earliest mechanistic virtual reality prototypes (e.g., Sensorama) allowed us to view stereoscopic 3D images accompanied by stereosound, smells, as well as wind effect - set the foundation and direction for future pioneers - there have been spearheaded developments which have continually pushed the concept of virtual reality to new domains. As virtual reality evolves, many new and yet-to-be-imagined applications will arise, but we must have understanding and patience as we wait for science, research andtechnology to mature and improve. The article ends with a short overview of future directions based upon recent breakthroughs in research and what this will mean for virtual reality in the coming years.

Background: 3D virtual reality (VR) Motionless Imagery Exercise through Avatar (MIEA) was developed to improve elderly’s psychological (cognitive and emotional) and physical health. This study observed the impact of this program on the cognitive functions and emotional well-being and the electrophysiological changes in older adults. Methods: This study was conducted using a randomized controlled trial design. The participants included 38 adults, 65 to 84 years of age, who were physically mobile and neurologically healthy. Among them, 19 participants were assigned to the experimental group, who underwent exercises using elderly avatars in a VR virtual exercise program. The other 19 participants were assigned to the control group who underwent the VR program. Both groups engaged in the VR intervention for 20 minutes three times a week, over six weeks. Results: The cognitive functions, including attention restraint, working memory, and phonemic fluency, of the experimental group showed significant improvements compared to the control group. Regarding emotional well-being, the experimental group showed greater self-efficacy. The electrophysiological changes revealed similar patterns to exercise-induced reactions in electromyography of the experimental group after intervention. Conclusions: These findings confirm that participation in 3D VR MIEA enhances cognitive functions and physical self-efficacy among the elderly. Therefore, 3D VR MIEA can be utilized in the rehabilitation therapy of patients or elderly with limited physical activity.

This research paper explores the transformative potential of immersive media, specifically virtual reality (VR), in enhancing empathy among users. Empathy is vital in fostering understanding, compassion, and social cohesion. Immersive media, with its ability to transport individuals into simulated environments and perspectives, offers unique opportunities to bridge the empathy gap. This paper examines how VR can boost empathy, including perspective-taking, emotional connection, experiential learning, breaking down barriers, and empathy-building simulations. It discusses existing studies and empirical evidence supporting the effectiveness of VR in promoting empathy. The paper acknowledges the ethical considerations and challenges associated with using VR for empathy enhancement, such as avoiding stereotype reinforcement and ensuring inclusive design. By highlighting the potential of immersive media in cultivating empathy, this research paper contributes to the growing field of empathy research and provides insights for the development and application of VR experiences aimed at fostering empathy and understanding in diverse contexts.

Virtual reality experiences are frequently created using game engines, yet they are not simple for novices and unskilled professionals who don’t have programming and 3D modeling skills. Concurrently, there is a knowledge gap in software project design for intuitive virtual reality authoring tools, which were supposed to be easier to use. This work compiles design guidelines derived from a systematic literature review to contribute in the development of more intuitive virtual reality authoring tools. We searched the Scopus and Web of Science databases for works published between 2018 and 2021 and discovered 14 papers. We compiled 14 requirement and feature design guidelines, such as Visual Programming, Immersive Authoring, Reutilization, Sharing and Collaboration, Metaphors, and Movement Freedom, among others. The collected guidelines have the potential to either guide the development of new authoring tools or to evaluate the intuitiveness of existing tools. Furthermore, they can also support the development of the metaverse, since virtual content creation is one of its bases.

Simulation-based education is a part of Intelligent Transportation Systems (ITS) education. The paper discusses the experimental success of using Virtual Reality (VR) technology in simulation-based ITS education to improve the quality of education while increasing immersion and motivation. The study documents the application of VR technology to a microscopic simulation model and the methodology to capture and evaluate student experiences. The study discusses findings and ways to improve the planned VR technology implementation in the ITS laboratory.

Digital twins are the foundation of autonomous off-road vehicles. Dynamic reduction methods are one of several ways to develop digital twins for off-road vehicles. The article commences with a comprehensive overview of the most widely used dynamic reduction methods and then introduces performance metrics for assessing their efficacies in the context of digital twins. The paper additionally includes a detailed mathematical derivation of the state-space representation for reduced-order finite element models. The state-space representation of the reduced finite element models facilitates their export to problem-solving environments for dynamic analysis. The state-space models are eventually solved utilizing the built-in libraries of numerical solvers in textual and graphical programming platforms. In addition, the article identifies the set of solvers that best suit the simulation of virtual models for off-road vehicles. This article also includes an evaluation of the simulation results of digital models with modes ranging from 0 to 30 Hz. In addition, the article demonstrates the lower bound of the frequency range necessary and sufficient to be retained in off-road vehicle virtual models. Finally, the paper presents the simulation outcomes for digital models of commercial off-road vehicles with custom-built control, electrical, and control systems.