Indoor localization is an active area of research dominated by traditional machine-learning techniques. Deep learning-based systems have shown unprecedented improvements and have accomplished exceptional results over the past decade, especially the Transformer network within natural language processing (NLP) and computer vision domains. We propose the hyper-class Transformer (HyTra), an encoder-only Transformer with multiple classification heads (one per class) and learnable embeddings, to investigate the effectiveness of Transformer-based models for received signal strength (RSS) based WiFi fingerprinting. HyTra leverages learnable embeddings and the self-attention mechanism to determine the relative position of the wireless access points (WAPs) within the high-dimensional embedding space, improving the prediction of user location. From an NLP perspective, we consider a fixed order sequence of all observed WAPs as a sentence and the captured RSS value(s) for every given WAP at a given reference point from a given user as words. We test our proposed network on public and private datasets of different sizes, proving that the quality of the learned embeddings and overall accuracy improves with increments in samples.

Underwater Sensor Networks (UWSNs) can enable a broad range of applications such as resource monitoring, disaster prevention, and navigation-assisted. It is especially relevant for sensor nodes location in UWSNs. Global Positioning System (GPS) is not suitable for using in UWSNs because of the underwater propagation problems. Hence some localization algorithms based on the precise time synchronization between sensor nodes have been proposed which are not feasible for UWSNs. In this paper, we propose a localization algorithm called Two-Phase Time Synchronization-Free Localization Algorithm (TP-TSFLA). TP-TSFLA contains two phases, namely, range-based estimation phase and range-free evaluation phase. In the first phase, we address a time synchronization-free localization scheme base on the Particle Swarm Optimization (PSO) algorithm to decrease the localization error. In the second phase, we propose a Circle-based Range-Free Localization Algorithm (CRFLA) to locate the unlocalized sensor nodes which cannot obtain the location information through the first phase. In the second phase, sensor nodes which are localized in the first phase act as the new anchor nodes to help realize localization. Hence in this algorithm, we use a small number of mobile beacons to help achieve location without any other anchor nodes. Besides, to improve the precision of the range-free method, an extension of CRFLA by designing a coordinate adjustment scheme is updated. The simulation results show that TP-TSFLA can achieve a relative high localization ratio without time synchronization.

With the integrated development of the Internet, wireless sensor technology, cloud computing, and mobile Internet, there has been a lot of attention given to research about and applications of the Internet of Things. A Wireless Sensor Network (WSN) is one of the important information technologies in the Internet of Things; it integrates multi-technology to detect and gather information in a network environment by mutual cooperation, using a variety of methods to process and analyze data, implement awareness, and perform tests. This paper mainly researches the localization algorithm of sensor nodes in a wireless sensor network. Firstly, a multi-granularity region partition is proposed to divide the location region. In the range-based method, the RSSI (Received Signal Strength indicator, RSSI) is used to estimate distance. The optimal RSSI value is computed by the Gaussian fitting method. Furthermore, a Voronoi diagram is characterized by the use of dividing region. Rach anchor node is regarded as the center of each region; the whole position region is divided into several regions and the sub-region of neighboring nodes is combined into triangles while the unknown node is locked in the ultimate area. Secondly, the multi-granularity regional division and Lagrange multiplier method are used to calculate the final coordinates. Because nodes are influenced by many factors in the practical application, two kinds of positioning methods are designed: the unknown node is in the positioning unit or not. When the unknown node is on the side of the positioning unit, we use the method of vector similarity. Moreover, we use the centroid algorithm to calculate the ultimate coordinates of unknown node. When the unknown node is not on the side of the positioning unit, we establish a Lagrange equation containing the constraint condition to calculate the first coordinates. Furthermore, we use the Taylor expansion formula to correct the coordinates of the unknown node. In addition, this localization method has been validated by establishing the real environment.

Proteins need to be located in appropriate spatiotemporal contexts to carry out their diverse biological functions. Mislocalized proteins may lead to a broad range of diseases, such as cancer and Alzheimer’s disease. Knowing where a target protein resides within a cell will give insights into tailored drug design for a disease. As the gold validation standard, the conventional wet lab uses fluorescent microscopy imaging, immunoelectron microscopy, and fluorescent biomarker tags for protein subcellular location identification. However, the booming era of proteomics and high-throughput sequencing generates tons of newly discovered proteins, making protein subcel-lular localization by wet-lab experiments a mission impossible. To tackle this concern, in the past decades, artificial intelligence (AI) and machine learning (ML), especially deep learning methods, have made significant progress in this research area. In this article, we review the latest advances in AI-based method development in three typical types of approaches, including sequence-based, knowledge-based, and image-based methods. We also elaborately discuss existing challenges and future directions in AI-based method development in this research field.

Detecting human head movement during sleep is important as it can help doctor to access some physical or mental health problems like infantile eczema, calcium deficiency, insomnia, anxiety disorder and even Parkinson’s disease, and provide useful clues for scientific diagnosing. To obtain the information of sleep head movement, current solutions either use the camera or require the user to wear intrusive sensors to collect the image or motion data. However, the vision-based schemes depend on the environmental light conditions and also bring privacy concerns. Some people including the elderly and infant may be reluctant to wear wearable devices during sleep. In this paper, we propose a novel system called Wi-Senser to address the issues mentioned above. Our Wi-Senser directly reuses the existing WiFi infrastructure and exploits the fine-grained channel state information (CSI) of WiFi signals to capture the minute human head movement during sleep without attaching any sensors to the human body. We design and implement our system with just one commercial off-the-shelf (COTS) router and one laptop equipped with Intel 5300 network interface card (NIC). We evaluate the performance of Wi-Senser with 6 volunteers (4 adults and 2 children). Extensive experiments demonstrate that Wi-Senser can achieve a 98.5% accuracy for head movement detection during sleep. Wi-Senser provides a new solution for achieving noninvasive, continuous and accurate human minute movement detection without any additional cost.

Existing research indicates that mineralization of Carlin-type gold deposit is related to geological structures, but current studies mostly focus on the qualitative association, and lack quantitative analysis of the relationship between mineralization and structural features, which limits the potential for predictive mineral exploration. In this study, the Nibao Carlin-type gold deposit was selected as the research area to conduct three-dimensional geological modeling, spatial analysis, and three-dimensional prospectivity modeling. Spatial analysis revealed that the majority of gold ore bodies are situated near the main fault, with gold mineralization primarily occurring within a spatial range of approximately -80 meters to 20 meters from the main fault plane. This spatial distribution predominantly aligns in a SW-NE direction. Spatial characteristic extraction of fault slope indicators suggests that the slope angles are conducive to the migration and accumulation of ore-forming hydrothermal fluids, with ore body metal content rapidly increasing within an angle range of approximately 20° to 60°. The shape analysis of the mainfault indicates that the principal spaces of mineralization enrichment are within -10m to 20m of the fault plane undulations, where gold resources are concentrated in a relatively flat area. However, the degree of mineralization is more pronounced in the protruding sections than in the depressed areas. The areas with significant dip changes in faults display higher variations in orebody attitudes, with mineralization noticeably weaker in areas where the fault steepness changes markedly. Ore-bearing units exhibit significantly higher grades within the -17° to 3° interval of fault steepness transition. This interval also sees a rapid accumulation of gold resources. The Nibao gold mine's mineralization is derived from deep, ore-bearing hydrothermal fluids ascending along major fractures, precipitating, and accumulating in favorable ore-hosting spaces (faults, anticline cores) and lithological combinations (sedimentary tuffs, tuffs). Three deep potential gold targets were identified, highlighting the deep western edge of the F1 fault and the deep southeast-trending lower plate as prospective areas for future exploration. This study underscores the effectiveness of 3D prospective modeling as an indispensable tool for elucidating the spatial distribution of fault-controlled Carlin-type gold deposits and their tectonic determinants.

The article presents an accessible route into the field of neuroscience through ardEEG device. This device allows convert Arduino UNO R4 WIFI into a brain-computer interface, making it easy to measure EEG, EMG and ECG signals with 8 channels. Over the past decade, the proliferation of artificial intelligence has significantly impacted various industries, including neurobiology. The integration of machine learning techniques has opened avenues for practical applications of EEG signals across technology sectors. This surge in interest has led to the widespread popularity of low-cost brain-computer interface devices capable of recording EEG signals using non-invasive electrodes. ardEEG device demonstrates satisfactory noise levels and accuracy for use in applied tasks. Moreover, it successfully detects alpha brain waves, showcasing its effectiveness in capturing essential neurological signals

In this paper, a dual-band WiFi antenna and its Multiple Input Multiple Output (MIMO) system application is designed, fabricated, and measured based on the Chinese characters “Men” and “Wei”. The antenna uses a 40×40×1.6 mm3 Fr4 substrate to analyze the combinatorial structure of Chinese characters using the theory of characteristic modes (TCM), to optimize the antenna dimensions by analyzing the mode current distribution, and to broaden the antenna bandwidth by etching rectangular slots on the ground. The measured and simulated results show that the four-element MIMO antenna covers 5.68-8.01 GHz, the isolation between the antennas is higher than 20 dB in the working band, the Envelope Correlation Coefficient (ECC) and the channel capacity losses (CCLs)of the simulation is lower than 0.001 and 0.18 bits/s/HZ, respectively. The efficiency of the antenna is higher than 90%, and it can be used for WiFi communication band (5.8 GHz and 6 GHz).

The standard treatment for early-stage lung cancer is complete tumor excision by limited resection of the lung. Pre-operative localization is used before video-assisted thoracoscopic surgery (VATS) to improve the accuracy of pulmonary nodule excision. However, lung atelectasis and hypoxia resulting from controlling apnea during the localization procedure may affect the localization accuracy. Pre-procedural pulmonary recruitment may improve respiratory mechanics and oxygenation during localization. In this study, we investigated the potential benefits of pre-localization pulmonary recruitment prior to pulmonary ground-glass nodule localization in a hybrid operating room. We hypothesized that pre-localization pulmonary recruitment would increase localization accuracy, improve oxygenation, and prevent the need for re-inflation during the localization procedure. We retrospectively enrolled patients with multiple pulmonary nodule localizations before surgical intervention in our hybrid operating room. We compared localization accuracies between patients who had undergone pre-procedure pulmonary recruitment and patients who had not. Saturation, re-inflation rate, apnea time, procedure-related pneumothorax, and procedure time were also recorded as secondary outcomes. Patients who had undergone pre-procedure recruitment had better saturation, shorter procedure time, and higher localization accuracy. The pre-procedure pulmonary recruitment maneuver was effective in increasing regional lung ventilation, leading to improved oxygenation and localization accuracy.

The proliferation of the Internet of Things (IoT) has revolutionized traditional services, giving rise to emerging smart infrastructures by connecting the physical and digital worlds. Sensory data is essential in IoT-based systems for providing context-aware and location-based services. Hence, the accurate localization of IoT devices is paramount. Anchor misplacement can significantly affect location information and coverage services in IoT. We study the effect of anchor misplacement in typical IoT settings where sensors are randomly deployed, can be mobile and may belong to multiple providers. We identify sensing coverage holes formed by anchor misplacement and analyze their presence and impact. To mitigate the impact of anchor misplacement on network reliability, we propose a framework to identify the affected sensor nodes and then identify and remove misplaced anchor nodes. The validity of our approach is verified, and its effectiveness is demonstrated by several experiments with different network topologies and parameters. Our results are promising and can be utilized in multiple coverage applications, such as smart agriculture systems and habitat monitoring, regardless of the sensors or deployment types. It also sheds light on best practices and methods for a reliable design of IoT-based systems.

G-protein coupled receptors (GPCRs), one of the largest superfamilies of cell-surface receptors, are heptahelical integral membrane proteins that play critical roles in virtually every organ system. G-protein-coupled receptors operate in membranes rich in cholesterol, with an imbalance in cholesterol level within the vicinity of GPCR transmembrane domains affecting the structure and/or function of many GPCRs, a phenomenon that has been linked to several diseases. These effects of cholesterol could result in indirect changes by altering the mechanical properties of the lipid environment or direct changes by binding to specific sites on the protein. There are a number of studies and reviews on how cholesterol modulates class A GPCRs, however, this area of study is yet to be explored for class C GPCRs, which are characterized by a large extracellular region and often form constitutive dimers. This review highlights specific sites of interaction, functions, and structural dynamics involved in the cholesterol recognition of the class C GPCRs. We summarize recent data from some typical family members to explain the effects of membrane cholesterol on the structural features and functions of Class C GPCRs and speculate on their corresponding therapeutic potential.

Hantaviruses are enveloped viruses that possess a tri-segmented, negative-sense RNA genome. The viral S-segment encodes the multifunctional nucleocapsid protein (N), which is involved in genome packaging, intracellular protein transport, immunoregulation and several other crucial processes during hantavirus infection. In this study we have generated fluorescently tagged N protein constructs derived from Puumalavirus, the dominant hantavirus species in Central, Northern and Eastern Europe. We have comprehensively characterized this protein in the rodent cell line CHO-K1, monitoring the dynamics of N protein complex formation and investigating co-localization with host proteins as well as the viral glycoproteins Gc and Gn. We found a significant spatial correlation of N with vimentin, actin and P-bodies, but not with microtubules. N constructs also co-localized with Gn and Gc, albeit not as strong as the glycoproteins associated with each other. Moreover, we as-sessed oligomerization of N constructs, observing efficient and concentration-dependent multi-merization, with complexes comprising more than 10 individual proteins.

We introduce quantum spatio-temporal dynamics (QSD) as modeled by the Nexus Paradigm (NP) of quantum gravity to resolve the problem of energy- momentum localization in a gravitational field. Currently, the gravitational field as described using the language of geometry modeled under General Relativity (GR) fails to provide a generally accepted definition of energy-momentum. Attempts at resolving this problem using geometric methods have resulted in various energy-momentum complexes whose physical meaning remain dubious since the resulting complexes are non-tensorial under a general coordinate transformation. In QSD, the tangential manifold is the affine connection field in which energy-momentum localization is readily defined. We also discover that the positive mass condition is a natural consequence of quantization and that dark energy is a Higgs like field with negative energy density everywhere. Finally, energy-momentum localization in quantum gravity shows that a free falling object will experience large vacuum fluctuations (uncertainties in location) in strong gravity than in weak gravity and that the amplitudes of these oscillations defines the energy of the free falling object.

Quantum computers are invaluable tools to explore the properties of complex quantum systems. We show that dynamical localization of the quantum sawtooth map, a highly sensitive quantum coherent phenomenon, can be simulated on actual, small-scale quantum processors. Our results demonstrate that quantum computing of dynamical localization may become a convenient tool for evaluating advances in quantum hardware performances.

This work addresses the energy-based source localization problem in wireless sensors networks. Instead of circumventing the maximum likelihood (ML) problem by applying convex relaxations and approximations (like all existing approaches do), we here tackle it directly by the use of metaheuristics. To the best of our knowledge, this is the first time that metaheuristics is applied to this type of problems. More specifically an elephant herding optimization (EHO) algorithm is applied. Through extensive simulations, the key parameters of the EHO algorithm are optimized such that they match the energy decay model between two sensor nodes. A detailed analysis of the computational complexity is presented, as well as performance comparison between the proposed algorithm and existing non-metaheuristic ones. Simulation results show that the new approach significantly outperforms the existing solutions in noisy environments, encouraging further improvement and testing of metaheuristic methods.

Robotic odor source localization (OSL) is a technology that enables mobile robots or autonomous vehicles to find an odor source in unknown environments. An effective navigation algorithm that guides the robot to approach the odor source is the key to successfully locating the odor source. While traditional OSL approaches primarily utilize an Olfaction-only strategy, guiding robots to find the odor source by tracing emitted odor plumes, our work introduces a fusion navigation algorithm that combines both vision and olfaction-based techniques. This hybrid approach addresses challenges such as turbulent airflow, which disrupts olfaction sensing, and physical obstacles inside the search area, which may impede vision detection. In this work, we propose a hierarchical control mechanism that dynamically shifts the robot’s search behavior among four strategies: crosswind maneuver, Obstacle-avoid Navigation, Vision-based Navigation, and Olfaction-based Navigation. Our methodology includes a custom-trained deep-learning model for visual target detection and a moth-inspired algorithm for Olfaction-based navigation. To assess the effectiveness of our approach, we implemented the proposed algorithm on a mobile robot in a search environment with obstacles. Experimental results demonstrate that our Vision and Olfaction Fusion algorithm significantly outperforms Vision-only and Olfaction-only methods, reducing average search time by 54% and 30%, respectively.

In recent years, video anomaly detection technology , which can intelligently analyze massive video and quickly find abnormal phenomena, has attracted extensive attention with the wide application of video surveillance technology . To address the complex and diverse problem of abnormal human behavior detection in surveillance videos, a surveillance video abnormal behavior detection and localization supervised method based on the deep network model and the traditional method is proposed. Specifically, we combined AGMM and YOLACT methods to obtain more accurate foreground information by fusing the foreground maps extracted by each technique. To further improve the accuracy , we use the PWC-Net technique to extract features of the foreground images and input them into an anomaly classification model for classification. The proposed method effectively detects and locates the abnormal behavior in the monitoring scene. In addition to the aforementioned methods, this paper also employs YOLOV5 and DeepSORT networks for object detection and tracking in the video, which allows us to track the detected objects for better understanding of the scene in the video. Experiments on the UCSD benchmark dataset and the comparison with state-of-the-art schemes prove the advantages of our method.

With the current technological transformation in the automotive industry, autonomous vehicles are getting closer to the Society of Automative Engineers (SAE) automation level 5. This level corresponds to the full vehicle automation, where the driving system autonomously monitors and navigates the environment. With SAE-level 5, the concept of a Shared Autonomous Vehicle (SAV) will soon become a reality and mainstream. The main purpose of an SAV is to allow unrelated passengers to share an autonomous vehicle without a driver/moderator inside the shared space. However, to ensure their safety and well-being until they reach their final destination, it is required an active monitoring of all passengers. In this context, this article presents a microphone-based sensor system that is able to localize sound events inside an SAV. The solution is composed of a Micro-Electro-Mechanical System (MEMS) microphone array with a circular geometry connected to an embedded processing platform that resorts to Field-Programmable Gate Array (FPGA) technology to successfully process in hardware the sound localization algorithms.

The increasing detection of infections of Trypanosoma cruzi, the etiological agent of Chagas disease, in non-endemic regions beyond Latin America has risen to be a major public health issue. With an impact in the millions of people, current treatments rely on antiquated drugs that produce severe side effects and are considered nearly ineffective for the chronic phase. The minimal progress in the development of new drugs highlights the need for advances in basic research on crucial biochemical pathways in T. cruzi to identify new targets. Here, we report on the T. cruzi presenilin-like transmembrane aspartyl enzyme, a protease of the aspartic class in a unique phylogenetic subgroup with T. vivax separate from protozoans. Computational analyses suggests it contains 9 transmembrane domains and an active site with the characteristic PALP motif of the A22 family. Multiple linear B-cell epitopes were identified by SPOT synthesis analysis with Chagasic patient sera. Two were chosen to generate rabbit antisera, whose signal was primarily localized to the flagellar pocket, intracellular vesicles and endoplasmic reticulum in parasites by whole cell immunofluorescence. The results suggest that the parasitic presenilin-like enzyme could have a role in the secretory pathway and serve as a biomarker for infections.

The important characteristic that could assist in autonomous navigation is the ability of a mobile robot to concurrently construct a map for an unknown environment and localize itself within the same environment. This computational problem is known as Simultaneous Localization and Mapping (SLAM). In literature, researchers have studied this approach extensively and have proposed a lot of improvement towards it. More so, we are experiencing a steady transition of this technology to industries. However, there are still setbacks limiting the full acceptance of this technology even though the research had been conducted over the last 30 years. Thus, to determine the problems facing SLAM, this paper conducted a review on various foundation and recent SLAM algorithms. Challenges and open issues alongside the research direction for this area were discussed. However, towards addressing the problem discussed, a novel SLAM technique will be proposed.

Sr2FeMoO6-δ (SFMO) double perovskite is a promising candidate for room-temperature spintronic applications since it possesses a half-metallic character (with theoretically 100% spin polarization), a high Curie temperature of about 415 K, and a low-field magnetoresistance (LFMR). However, due to different synthesis conditions of ceramics as well as thin films, different mechanisms of electrical conductivity and magnetoresistance prevail. In this work, we consider the weak localization effect in SFMO occurring in disordered metallic or semiconducting systems at very low temperatures due to quantum interference of back-scattered electrons. We calculate the quantum corrections to conductivity and the contribution of electron scattering to the resistivity of SFMO. We attribute the temperature dependence of SFMO ceramics resistivity in the absence of a magnetic field to the fluctuation induced tunneling model. Also, we attribute the decreasing resistivity in the temperature range from 409 K up to 590 K to adiabatic small polaron hopping and not to localization effects. Both fluctuation induced tunneling and adiabatic small polaron hopping do not favor quantum interference. Additionally, we demonstrate that the resistivity upturn behavior of SFMO cannot be explained by weak localization. Consequently, to the best of our knowledge, there is still no convincing evidence for the presence of weak localization in SFMO.

Meiotic crossovers/chiasmata are not randomly distributed and strictly controlled. The mechanisms behind COs patterning remain largely unknown. In many species COs predominantly occur in the distal 2/3 of the chromosome arm and suppression of COs is observed in the proximal regions. The exceptions are some species, among which Allium fistulosum has strictly localized COs in the proximal region. The ability to manipulate the COs localization can be useful for onion breeding. We investigated the factors that may contribute to the pattern of COs in two closely related onion species A. cepa and A. fistulosum, which differ significantly in the localization of chiasmata, and their F1 diploid and triploid hybrids in pollen mother cells. We demonstrate a significant shift in the COs localization to the distal and interstitial region in F1 triploid hybrid, which has a complete diploid set of A. fistulosum chromosomes and haploid set of A. cepa chromosomes. This observation points to a possible genetic control of COs distribution. We did not find the differences in the assembly and disassembly of ASY1 and ZYP1 between A. cepa and A. fistulosum while the difference between parental species and their hybrids was observed. In diploid F1 hybrids at pachytene the chromosome pairing delay marked by ASY1 was revealed. Immunolocalization of MLH1, a marker for class I of the interference-dependent COs, and MUS81, a marker for class II of the interference-free COs, and mlh1/mus81 gene expression profiling in different stages of meiosis showed a spatiotemporal asymmetry among A. cepa, A. fistulosum and their diploid and triploid F1 hybrids. Our results support the hypothesis of genetic control of CO distribution as one of the players that affect meiotic recombination and exchange of genomic material.

Human detection from Unmanned Aerial Vehicles (UAV) is gaining popularity in the field of disaster management, crowd counting, people monitoring. Real time human detection from UAV is a challenging task, because of many constraints involved. This study proposes a system for real time detection of humans on videos captured from UAVs addressing three of these constraints namely, flying height, computation time and scale of viewing. The proposed method integrated an android application with a binary classifier based on Haar-features to automatically detect human / non-human class from UAV images. The video frames were parsed and detected humans from image frames were geo-localized and visualized on Google Earth. The performance was evaluated for geo-localization accuracy, computation time and detection accuracy, considering human coverage – pixel size relationship for various heights and scale factor. Based on flying height - human size relationship and tradeoff between detection accuracy vs computation time, the study came up with optimal parameters for OpenCV’s cv2.cascadeClassifier. detectMultiScale function. This paper establishes a strong ground for further research relating to real time human detection from UAV.

Because of the increasing relevance of the Internet of Things and location-based services, researchers are evaluating wireless positioning techniques, such as fingerprinting, on Low Power Wide Area Network (LPWAN) communication. In order to evaluate fingerprinting in large outdoor environments, extensive, time-consuming measurement campaigns need to be conducted to create useful datasets. This paper presents three LPWAN datasets which are collected in large-scale urban and rural areas. The goal is to provide the research community with a tool to evaluate fingerprinting algorithms in large outdoor environments. During a period of three months, numerous mobile devices periodically obtained location data via a GPS receiver which was transmitted via a Sigfox or LoRaWAN message. Together with network information, this location data is stored in the appropriate LPWAN dataset. The first results of our basic fingerprinting implementation, which is also clarified in this paper, indicate a mean location estimation error of 214.58 m for the rural Sigfox dataset, 688.97 m for the urban Sigfox dataset and 398.40 m for the urban LoRaWAN dataset. In the future, we will enlarge our current datasets and use them to evaluate and optimize our fingerprinting methods. Also, we intend to collect additional datasets for Sigfox, LoRaWAN and NB-IoT.

Water distribution networks are often susceptible to pipeline leaks caused by mechanical damages, natural hazards, corrosion, and other factors. This paper focuses on the detection of leaks in water distribution networks (WDN) using a data-driven approach based on machine learning. A hybrid Autoencoder neural network (AE) is developed, which utilizes unsupervised learning to address the issue of unbalanced data (as anomalies are rare events). The AE consists of a 3DCNN encoder, a ConvLSTM decoder, and a ConvLSTM future predictor, making the anomaly detection robust. Additionally, spatial, and temporal attention mechanisms are employed to enhance leak localization. The AE first learns the expected behavior and subsequently detects leaks by identifying deviations from this expected behavior. To evaluate the performance of the proposed method, the Water Network Tool for Resilience (WNTR) Simulator is utilized to generate water pressure and flow rate data in a water supply network. Various conditions such as fluctuating water demands, data noise, and the presence of leaks are considered using the pressure-driven demand (PDD) method. Datasets with and without pipe leaks are obtained, where the AE is trained using the dataset without leaks and tested using the dataset with simulated pipe leaks. The results, based on a benchmark WDN and a confusion matrix analysis, demonstrate that the proposed method successfully identifies leaks in 96% of cases and a false positive rate of 4% compared to a random forest model baseline based on supervised learning with a false positive rate of 15% due to unbalanced data. Furthermore, a real case study demonstrates the applicability of the developed model for leak detection in operational conditions of water supply networks using inline sensor data.

Indoor localization (IL) is a significant topic of study with several practical applications. The area of IL has evolved greatly in recent years due to the introduction of numerous technologies such as WiFi, Bluetooth, cameras, and other sensors. Despite the growing interest in this field, there are numerous challenges and drawbacks that must be addressed to develop more accurate and sustainable systems for IL and its real-life applications. This review study gives an in-depth look into IL, covering the most promising artificial intelligence-based and hybrid strategies that have shown excellent potential in overcoming some of the limitations of classic methods. In addition, the paper investigates the significance of high-quality datasets and evaluation metrics in the design and assessment of IL algorithms. Furthermore, this overview study emphasizes the crucial role that machine learning techniques, such as deep learning and transfer learning, play in the advancement of IL. A focus on the importance of IL and the various technologies, methods, and techniques that are being used to improve it. Finally, The survey highlights the need for continued research and development to create more accurate and scalable techniques that can be applied across a range of industries, such as evacuation-egress routes, hazard-crime detection, smart occupancy-driven energy reduction and asset tracking and management.

The current paper presents a case of a 33-year-old female with an uncommon localization of a leiomyoma in the oral cavity - the anterior palatal fibromucosa and the incisive papilla. The patient referred to the Oro-Maxillo-Facial Surgery Clinic of the Emergency City Hospital Timisoara, Romania accusing a slight discomfort in the act of mastication and the occurrence and persistence of a diastema between the upper central incisors, due to the presence of a tumoral mass located in the anterior palatal mucosa, between the upper central incisors, without any changes of the subjacent bone structure in the anterior hard palate visible on the cone beam computed tomography image (CBCT). The tumor was removed by a surgical excisional biopsy and a histopathological examination was performed using morphological Hematoxylin–Eosin (HE) staining and additional immunohistochemical (IHC) reactions, in order to confirm the diagnosis. On microscopic examination, there were found bundles of spindle cells with eosinophilic cytoplasm and vesicular nuclei, with finely granular chromatin. The immunohistochemically staining found positive results for smooth muscle actin (SMA) and desmin and negative result for vimentin. The treatment of choice for leiomyoma of the oral cavity is surgical excision with clear margins, followed by periodical clinical monitoring.

Blood cell analysis is a crucial diagnostic process in medical practice. In particular, detecting white blood cells (WBCs) is essential for diagnosing of many diseases. The manual screening of blood films is a time-consuming and subjective process, which can lead to inconsistencies and errors. Therefore, automated detection of blood cells can improve the accuracy and efficiency of the screening process. In this study, an explainable Vision Transformer (ViT) model was proposed for the automatic detection of WBCs from blood films. The proposed model utilizes the self-attention mechanism to extract relevant features from the input images and leverages transfer learning by incorporating pre-trained model weights to improve its performance. The proposed model achieved a classification accuracy of 99.40% for five distinct types of WBCs and exhibited potential in reducing the time required for manual screening of blood films by pathologists. Upon examination of the misclassified test samples, it was observed that incorrect predictions were correlated with the presence or absence of granules in the cell samples. To validate this observation, the dataset was divided into two classes, namely Granulocytes and Agranulocytes, and a secondary training process was conducted. The resulting ViT model trained for binary classification achieved an accuracy of 99.70%, recall of 99.54%, precision of 99.32%, and F-1 score of 99.43% during the test phase. To ensure the reliability of the ViT model's multi-class classification of WBCs, the pixel areas that the model focuses on in its predictions are visualized through the Score-CAM algorithm.

Many applications in the context of Industry 4.0 require precise localization. However, indoor localization remains an open problem, especially in complex environments such as industrial environments. In recent years, we have seen the emergence of Ultra WideBand (UWB) localization systems. The aim of this article is to evaluate the performance of a UWB system to estimate the position of a person moving in an indoor environment. To do so, we implemented an experimental protocol to evaluate the accuracy of the UWB system both statically and dynamically. The UWB system is compared to a ground truth obtained by a motion capture system with a millimetric accuracy.

Underwater robots often encounter the influence of confined underwater environments during underwater exploration. These environments include underwater caves, sunken ships, submerged houses, and pipeline structures. Robot positioning in these environments is strongly disturbed, leading not only to the failure of some commonly used positioning methods but also to an increase in errors in positioning systems that normally function well in open water. In order to overcome the limitations of positioning methods in underwater confined environments, researchers have studied different underwater positioning methods and selected suitable methods for positioning in such environments. These methods can achieve high-precision positioning without relying on assistance from other platforms, and are referred to as autonomous positioning methods. Autonomous positioning methods for underwater robots mainly include SINS/DR positioning and SLAM positioning. In addition, in recent years, researchers have also developed some bio-inspired autonomous positioning methods. This article introduces the applicable robot positioning methods and sensors in underwater confined environments and discusses the research directions of robot positioning methods in such environments.

As an established and widely available infrastructure, wireless local area networks (WLANs) have emerged as a viable option for indoor localization of both mobile and stationary users. In planning a mobile communications network and radio system design, the critical role of coverage prediction becomes evident, empowering network operators to optimize cellular networks and elevate the overall customer experience. Moreover, WLANs present several challenges that must be fulfilled when it comes to localization based on Wi-Fi signals to get a proper coverage prediction map. This paper presents a study based on application of the extra trees regression (ETR) for indoor localization by using coverage prediction maps. The aim of the proposed method is to accurately estimate a user’s position within a radio environment map (REM) area using collected received signal strength indicator (RSSI) values. The proposed scheme investigates several machine learning (ML) regression algorithms for localization, where the training dataset is obtained from the REM by using the nearest neighbors method. Parameter tuning is conducted to optimize the performance of the ETR scheme by using 10-fold cross-validation. In the numerical results, we first demonstrate the effectiveness of utilizing ML regression techniques for generating coverage maps, which enables accurate estimation of the Wi-Fi signal strength in indoor environments. Then, we showcase the superior performance of the proposed ETR-based method compared to several other ML schemes for indoor localization using the REM. ML algorithms, including decision tree regression and the ETR, are compared to evaluate the system model. Based on error metrics, the proposed ETR-based approach exhibits the best performance among the evaluated techniques. The combination of coverage map generation and localization using regression techniques offers a powerful approach for analyzing the radio frequency (RF) environment in indoor spaces.

The widespread availability of digital image processing softwares has given rise to various forms of image manipulation and forgery which can pose a significant challenge in different fields such as law enforcement, journalism etc,. it can also lead a privacy concern. We are proposing a privacy-preserving framework to encrypt images before processing them is vital to maintain the privacy and confidentiality of sensitive images, especially those used for purpose of Investigation. To address these challenges, we propose a novel solution that detects image forgeries while preserving the privacy of the images. Our method proposes a privacy-preserving framework that encrypts the images before processing them, making it difficult for unauthorized individuals to access them. The proposed method utilizes a compression quality analysis in the encrypted domain to detect the presence of forgeries in images if the forged portion (dummy image) has a compression quality different from the original image (featured image) in the encrypted domain. This approach effectively localizes the tampered portions of the image, even for small pixel blocks of size 10x10 in the encrypted domain. Furthermore, the method identifies the featured image's JPEG quality using the first minima in the energy graph.

Cooperative localization under complex urban environments has become a solution to replace the Global Navigation Satellite System (GNSS) positioning. Due to utilizing distance measured and information exchanged between vehicles, cooperative localization results in high computational complexity and heavy communication overhead. This paper proposes a cooperative localization method based on evolutionary coalitional game theory, which implements vehicles' location estimation with less communication cost. We select the neighboring vehicles to form a coalition based on the node's square position error bound and communication cost. The location is obtained via exchanging information between vehicles. It is evident from the simulations and results that the proposed method holds low communication overhead while maintaining localization accuracy.

Background. Restoring large defects with proximal caries extending below the cemento-enamel junction and cavity margins located beneath the gingival tissues represents a very common clinical situation. The aim of this article is to propose a clinical classification of the localization subgingival margins of cavity.Material and methods. Diagnosis is carried out by periodontal probe perpendicular to the long axis of the tooth in the deepest point of the cavity’s margin. To describe the localization subgingival margins of cavity we use exponent which value is equal to the distance (integer number expressed in millimeters) of the level of epithelial attachment to the margin of the cavity. Three periodontal examiners, with >10 years of periodontal practice, were required to attend a calibration session aimed at the validation of the proposed classification. Results. The intrarater and interrater agreement among the localization subgingival margins of cavity: for intrarater agreement ranged from 0.74 to 0.95 (almost perfect agreement), whereas interrater agreement ranged from 0.26 to 0.59 (moderate agreement).Conclusions. The classification the localization subgingival margins of cavity is useful for reaching a more precise diagnosis.

As a typical visual positioning system, monocular ranging is widely used in various fields. However, when the distance increases, there is a greater error. YOLOv8 network has the advantages of fast recognition speed and high accuracy. This paper proposes a method by combining YOLOv8 network recognition with a monocular ranging method to achieve target localization and grasping for the NAO robots. By establishing a visual distance error compensation model and applying it to correct the estimation results of the monocular distance measurement model, the accuracy of the NAO robot's long-distance monocular visual positioning is improved. Additionally, a grasping control strategy based on pose interpolation is proposed. Throughout, the proposed method's advantage in measurement accuracy was confirmed via experiments, and the grasping strategy has been implemented to accurately grasp the target object.

Macrophages and dendritic cells (DCs) acquire functionally distinct properties in response to various environmental stimuli; the interaction of these cells with myeloid-derived suppressor cells (MDSCs) in tumor microenvironments regulates cancer progression. Immunodeficient mice lacking T cells are less likely to reject human cancer cells because of major histocompatibility complex (MHC) mismatches. The xenograft tumor microenvironment, comprising human cancer and mouse host cells, exhibits more complex bidirectional signaling and function than a syngeneic tumor microenvironment. Here human and mouse colorectal cancer cells were transplanted into nude mice to elucidate differences in macrophage, DC, and MDSC functions in human xenograft and mouse allograft tumor models. Plasma interferon-γ and interleukin-18 concentrations in the former model after intraperitoneal lipopolysaccharide (LPS) administration were significantly higher than those in the latter model and non-transplanted control group. Splenic MHC class I, II, and CD80 expression increased in CD11b+ and MDSC populations after LPS administration in only the xenograft tumor model. The number of CD80- and MRC1-expressing cells decreased upon LPS administration in only the xenograft tumor. These results suggxest that macrophages and DCs function normally in xenograft tumor models, whereas their functions in response to LPS administration vary in allograft tumor models.

RFID based technology innovated a new field of wireless sensing, which has been applied in posture recognition, object localization and the other sensing fields, the existing sensing methods often require tags to be attached to dynamic targets (because RFID signals are more sensitive to moving target), significantly limiting their applications. It is a challenging task to sensing a static target without tag attached in NLOS (Non-Line-of-Sight). We utilized RFID technologies to sense the static foreign objects in agricultural products, and taken metal, rock, rubber and clod as sensing targets that are common in agricultural. By deploying a tag matrices to create a sensing region, we observed the signal variations before and after the appearance of the targets in this sensing region, determined the targets’ positions and their types. Here, we buried the targets in the media of seedless cotton and wheat, and detected static targets with a non-contact method in the NLOS. Researches illustrated that by deploying appropriate tag matrices and adjusting the angle of a single RFID antenna, the matrices signals can be sensitive to the static targets’ positions and their properties,i.e. matrices signals vary with different targets and their positions. Specifically, we achieved a 100% success rate in locating metallic targets, while the success rate for clods was the lowest at 86%. We achieved a 100% recognition rate for the types of all the four objects.

Rhabdomyosarcoma (RMS) is the most common soft tissue malignancy in children and adolescents. Respecting the age of the patients and the tumor aggressiveness, investigation of the molecular mechanisms of RMS tumorigenesis is directed toward the identification of novel therapeutic targets. To contribute to a better understanding of the molecular pathology of RMS, we investigated ankyrin repeat domain 1 (ANKRD1), designated as a potential marker for differential diagnostics. In this study, we used three RMS cell lines (SJRH30, RD, and HS-729) to assess its expression profile, intracellular localization, and turnover. They express wild-type ANKRD1, as judged by the sequencing of the open reading frame. Each cell line expressed a different amount of ANKRD1 protein, although the transcript level was similar. According to Western blot analysis, ANKRD1 protein was expressed at detectable levels in the SJRH30 and RD cells (SJRH30>RD), but not in the HS-729, even after immunoprecipitation. Immunocytochemistry revealed nuclear and cytoplasmic localization of ANKRD1 in all examined cell lines. Moreover, the punctate pattern of ANKRD1 staining in the nuclei of RD and HS-729 cells overlapped with coilin, indicating its association with Cajal bodies. We have shown that RMS cells are not able to overexpress ANKRD1 protein, which can be attributed to its proteasomal degradation. The unsuccessful attempt to overexpress ANKRD1 in RMS cells indicates the possibility that its overexpression may be lethal for RMS cells and opens a window for therapeutic targeting.

The timely diagnosis of defects at their incipient stage of formation is crucial to extend the life-cycle of technical appliances. This is the case of mechanical-related stress, either due to long aging degradation processes (e.g., corrosion) or in-operation forces (e.g., impact events), which might provoke detrimental damages, such as cracks, disbonding or delaminations, most commonly followed by the release of acoustic energy. The localization of these sources can be successfully fulfilled via adoption of Acoustic Emission (AE)-based inspection techniques through the computation of the Time of Arrival (ToA), namely the time at which the induced mechanical wave released at the occurrence of the acoustic event arrives to the acquisition unit. However, the accurate estimation of the ToA may be hampered by poor Signal-to-Noise ratios (SNRs). In these conditions, standard statistical methods typically fail. In this work, two alternative Deep Learning methods are proposed for ToA retrieval, namely a Dilated Convolutional Neural Network (DilCNN) and a Capsule Neural Network for ToA (CapsToA). These methods have the additional benefit of being portable on resource-constrained microprocessors. Their performance has been extensively studied on both synthetic and experimental data, focusing on the problem of ToA identification for the case of a metallic plate. Results show that the two novel methods can achieve localization errors which are up to 70% more precise than those yielded by conventional strategies, even when the SNR is severely compromised (i.e., down to 2 dB). Moreover, DilCNN and CapsNet have been implemented in a tiny machine learning environment and then deployed on microcontroller units, showing a negligible loss of performance with respect to offline realizations.

We discuss two methods to detect the presence and location of a person in a small-scale room and compare the performances. The first method is Direct Intersection, which determines a coordinate point based on the intersection of spheroids defined by observed distances of high-intensity reverberations. The second method, Sonogram analysis, overlays all channel’s room impulse responses to generate an intensity map for the observed environment. We demonstrate that the former method has lower computation complexity and higher accuracy for small numbers of channels, while the latter performs more robustly.

Multi-floor environments are usually ignored while designing an autonomous robot for indoor cleaning applications. However, for efficient operation in such environments, the ability of a robotic platform to traverse staircases is crucial. Staircase detection and localization is highly important for planning the traversal on staircases. This paper describes a deep learning approach using Convolutional Neural Networks (CNNs) based Robot Operation System (ROS) to staircase detection and localization. We use an object detection network to detect staircases in images. We also localize these staircases using a contour detection algorithm to detect the target point, a point close to the center of the first step, and the angle of approach to the target point. Experiments are performed with data obtained from images captured on different types of staircases at different view points/angles. Results show that the approach is very accurate in identifying the presence of the staircase in the working environment and is also able to locate the target point with good accuracy.

In the autonomous navigation of mobile robots, precise positioning is crucial. In forest environments with weak satellite signals or in sites disturbed by complex environments, satellite positioning accuracy has difficulty in meeting the requirements of autonomous navigation positioning accuracy for robots. This article proposes a binocular vision SLAM/UWB tightly coupled localization method. The core of this algorithm is based on an Extended Kalman Filter (EKF), which utilizes the displacement increment output by binocular vision ORB-SLAM and the positioning coordinates calculated via UWB positioning as measurement information to achieve data fusion. The research utilized the constructed experimental platform to collect images and UWB ranging data in outdoor environments and experimentally validated the combined positioning method. The experimental results show that this algorithm outperforms the use of the individual UWB or visual SLAM localization methods in terms of positioning accuracy. Compared with traditional single positioning algorithms, this algorithm exhibits better practicality and stability, and can effectively suppress the impact of UWB non line of sight errors. The average error under normal line of sight conditions is 0.058 m, the root mean square error (RMSE) is 0.080, and the average error under non-line-of-sight conditions is 0.081 m, with an RMSE of 0.084. There is no significant jump or drift. Through the tightly coupled processing of binocular vision SLAM and UWB positioning, more reliable and accurate mobile robot positioning can be achieved, providing a useful reference for the autonomous navigation of mobile robots in complex environments.

Radio techniques are widely used in wildlife tracking. Currently, the most common tracking methods include radio tracking (operating on VHF and UHF frequencies), satellite tracking (e.g., Argos satellite Doppler-based positioning system), and Global Navigation Satellite System (GNSS) tracking. One of the radio tracking systems is the Radio-Frequency Identification (RFID) system, characterized by small dimensions and a long operational period due to energy-efficient features. The advantages of RFID make it possible to apply this technique to track oak acorns in the process of zoochoric dispersal. In our study, we explored the potential applications of RFID systems for monitoring the dispersal of oak acorns. We developed a tracking system based on a semi-passive RFID tag, which we tested under laboratory and quasi-realistic conditions. The obtained results confirm the feasibility of using our system in radio tracking small objects such as oak acorns.

The Lead-DBS imaging toolbox reconstructs the location of β-oscillations in the subthalamic nucleus (STN) in patients with Parkinson’s disease. The objective was to compare this probabilistic location with those of intraoperative monopolar β-oscillations (Vercise Cartesia directional electrodes, Boston Scientific). Also, the efficacy of stimulated structures in reducing motor symptoms were analysed. β-oscillations were computed from local field potentials [0.5-3kHz] by using shielded wires for monopolar recordings with an extracranial shielded reference. For each electrode contact, power spectral densities of the β-band [13-31Hz] were compared with those of all eight electrode contacts. The DISTAL, electrophysiological, and DBS target atlases of the Lead-DBS toolbox were applied to the reconstructed electrodes from preoperative MRI and postoperative CT. Thirty-six electrodes (20 patients: 7 female, 13 male; 16/20 both, 4/20 single STN) were analysed. Stimulation sites dorsal and/or lateral to the sensorimotor STN were most efficient. In 33/36 electrodes at least one contact was measured with stronger β-oscillations, 23 in or touching the ventral subpart of the probabilistic volume with β-oscillations, 10 not located in or touching but adjacent to this volume; in 3/36 electrodes, no contact was found with β-oscillations, they were distant from this volume. Monopolar local field potentials confirmed the ventral subpart of the probabilistic β-oscillations.

This study suggests a novel cooperative multi-simplex algorithm that generalizes a local search optimizer to design a novel global search heuristic algorithm. The proposed algorithm exploits the vertex sharing strategy to enhance the search abilities of the working simplexes. The vertex sharing among the simplexes is carried out through cooperative step that is based on fitness of the underlying simplex. The proposed algorithm is applied to solve some systems of nonlinear equations by transforming them to optimization problems. Comparative analysis of results shows that the proposed method is practical and effective.

People localization is a key building block in many applications. In this paper, we propose a deep learning based approach that significantly improves the localization accuracy and reduces the runtime of Wi-Fi based localization systems. Three variants of the deep learning approach are proposed, a sub-task architecture, an end-to-end architecture, and an architecture that incorporates prior knowledge. The performance of the three architectures under different conditions is evaluated and the significant improvement of the three architectures over existing approaches is demonstrated.

In two dimensional disordered lattices, presence of interaction makes particles less localized than the non-interacting ones within the range of disorder strength W ≤ 4 and interaction strength V ≤ 4. If the interaction strength is higher, then particles localize more. Although, a localization-delocalization transition is not found, a transition with changes in the dominant correlations is observed. The nature of correlations between the particles as nearest neighbors become dominant beyond certain disorder strengths.

Fleets of drones have attracted a lot of attention from the research community in recent years. One of the biggest challenges in deploying such systems is localization. While GNSS localization systems can only be effective in open outdoor environments, new solutions based on radio sensors (e.g., ultra-wideband) are increasingly being used for localization in various situations and environments. However, self-localization without prior knowledge of anchor positions remains an open problem which, for example, makes it impossible to track a moving target. In this article, we provide a comparison of different variants of gradient descent-based algorithms, with a new improved variant, for solving the localization problem using relative distance measurements and multilateration. It is applied to self-localization of anchors and tracking targets using ultra-wideband distance sensors. A realistic simulation of drone tracking and anchors’ localization is performed to demonstrate the robustness and accuracy of the proposed approach.

In Ultra-wideband (UWB)-based wireless ranging or distance measurement, differentiation between line-of-sight~(LOS), non-line-of-sight~(NLOS), and multi-path (MP) conditions are important for precise indoor localization. This is because the accuracy of the reported measured distance in UWB ranging systems is directly affected by the measurement conditions (LOS, NLOS or MP). However, the major contributions in literature only address the binary classification between LOS and NLOS in UWB ranging systems. The MP condition is usually ignored. In fact, the MP condition also has a significant impact on the ranging errors of the UWB compared to the direct LOS measurement results. Though, the magnitudes of the error contained in MP conditions are generally lower than completely blocked NLOS scenarios. This paper addresses machine learning techniques for identification of the mentioned three classes (LOS, NLOS, and MP) in the UWB indoor localization system using an experimental data-set. The data-set was collected in different conditions at different scenarios in indoor environments. Using the collected real measurement data, we compare three machine learning (ML) classifiers, i.e., support vector machine (SVM), random forest (RF) based on an ensemble learning method, and multilayer perceptron (MLP) based on a deep artificial neural network, in terms of their performance. The results show that applying ML methods in UWB ranging systems are effective in identification of the above-mentioned three classes. In specific, the overall accuracy reaches up to 91.9% in the best-case scenario and 72.9% in the worst-case scenario. Regarding the F1-score, it is 0.92 in the best-case and 0.69 in the worst-case scenario. For reproducible results and further exploration, we (will) provide the publicly accessible experimental research data discussed in this paper at PUB - Publications at Bielefeld University. The evaluations of the three classifiers are conducted using the open-source python machine learning library scikit-learn.

With the growing demand for positioning services, angle-of-arrival (AoA) estimation or direction-finding (DF) has been widely investigated for applications in fifth-generation (5G) technologies. Many existing AoA estimation algorithms only require the measurement of the direction of the incident wave at the transmitter to obtain correct results. However, for most of the cellular systems such as Bluetooth indoor positioning system due to multipath and non-line-of-sight (NLOS) propagation, the indoor positioning accuracy is severely affected. In this paper a comprehensive algorithm is investigated that combines radio measurements from Bluetooth AoA local navigation systems with indoor position estimates obtained using particle filtering, which allows us to explore new optimised methods to reduce estimation errors in indoor positioning. First, particle filtering is used to predict the rough position of a moving target. Then, an algorithm with robust beam weighting is used to estimate the AoA of the multipath components. Based on this, a system of pseudo-linear equations for target positioning based on the probabilistic framework of PF and AoA measurement is derived. Theoretical analysis and simulation results show that the algorithm can improve the positioning accuracy by about 25.7% on average.

In wireless sensor networks (WSNs) deployed in smart agriculture systems, accurately determining the locations of sensor nodes is crucial for efficient monitoring and control. However, in many cases, the exact positions of certain sensor nodes may be unknown. To address this challenge, this paper presents a novel method for localizing unknown sensor nodes in WSN-based smart agriculture systems using range measurements. The proposed method utilizes the Levenberg-Marquardt optimization algorithm to solve a nonlinear least squares problem and minimize the error in estimating the unknown node locations. By leveraging the known positions of a subset of sensor nodes and the inexact distance measurements between pairs of nodes, the localization problem is transformed into a nonlinear optimization problem. To validate the effectiveness of the approach, extensive simulations and experiments were conducted. The results demonstrate that the proposed method achieves accurate localization of the unknown sensor nodes, effectively enhancing the overall performance of the WSN-based smart agriculture system. Furthermore, the method demonstrates robustness against measurement noise and scalability for large-scale networks. The practical implications of this research extend beyond smart agriculture systems, as the proposed method can be applied to various WSN applications where precise node localization is essential.

This article explores the implementation of high accuracy GPS denied Ad-Hoc localization. There is little research on Ad-Hock UWB-enabled localization systems with mobile and stationary nodes. This work aims to demonstrate the localization of bicycle-modeled robots in a non-static environment through a mesh network of mobile, stationary robots and ultra-wideband sensors. The non-static environment adds a layer of complexity when actors can enter and exit the node’s field of view. The method starts with an initial localization step where each unmanned ground vehicle (UGV) uses the surrounding, available anchors to derive an initial local or, if possible, global position estimate. The initial localization uses a simplified implementation of the iterative multi-iteration Ad-Hoc Localization System (AHLos). This estimate was refined using an unscented Kalman filter (UKF) following a constant turn rate and velocity magnitude model (CTRV). The UKF fuses the robot’s odometry and the range measurements from the Decawave ultra-wideband receivers stationed on the network nodes. Through this position estimation stage, the robot broadcasts to its neighbors its estimated position to help the others further improve their localization estimates and localize themselves. This wave-like cycle of nodes helping to localize each other allows the network to act as a mobile Ad-Hoc localization network.

In this study, we propose an augmentation method for machine learning based on relabeling data in caregiving and nursing staff indoor localization with Bluetooth Low Energy (BLE) technology. Indoor localization is used to monitor staff to patient assistance in caregiving and to gain insights into workload management. However, improving accuracy is challenging when there is a limited amount of sensor data available for training. In this paper, we propose a data augmentation method to reuse the Received Signal Strength (RSS) from different sensors by relabeling to the sensors with less samples resolving data imbalance. Standard deviation and Kullback-Leibler divergence between minority and majority class are used to measure signal pattern to find matching sensors to relabel. By matching sensors between classes, two variation of relabeling are implemented specifically full and partial matching. The performance is evaluated using real world dataset we collected for five days in a nursing care facility installed with 25 BLE beacons. Random Forest model is utilized for location recognition, and performance is compared using the weighted F1-score to account for class imbalance. By increasing the sensor data with our proposed relabeling method for data augmentation, we achieved higher minority class F1-score as compared to augmentation with Random Sampling, Synthetic Minority Oversampling Technique (SMOTE) and Adaptive Synthetic Sampling (ADASYN). Our proposed method utilizes collected sensor data by leveraging majority class samples. Full matching demonstrated a 6 to 8% improvement from the original baseline overall weighted F1-score.

Accurate pose estimation is a fundamental ability that all mobile robots must posses in order to navigate a given environment. Much like a human, this ability is dependent on the robot's understanding of a given scene. For Autonomous Vehicles (AV's), detailed 3D maps created beforehand are widely used to augment the perceptive abilities and estimate pose based on current sensor measurements. This approach however is less suited for rural communities that are sparsely connected and cover large areas. Topological maps such as OpenStreetMaps have proven to be a useful alternative in these situations. However, vehicle localization using these maps is non-trivial, particularly for the global localization task, where the map spans large areas. To deal with this challenge, we propose road descriptors along with an initialization technique for localization that allows for fast global pose estimation. We test our algorithms on (real world) maps and benchmark them against other map based localization as well as SLAM algorithms. Our results show that the proposed method can narrow down the pose to within 50 centimeters of the ground truth significantly faster than the state of the art methods.

Despite their enormous potential the use of Indoor Localization Systems (ILS) remains seldom. One reason is the lack of market transparency and stakeholders’ trust in the systems’ performance as a consequence of insufficient use of Test and Evaluation (T&E) methodologies. The heterogeneous nature of ILS, their influences, and their applications pose various challenges for the design of a methodology that provides meaningful results. Methodologies for building-wide testing exist, but their use is mostly limited to associated indoor localization competitions. In this work, the T&E 4iLoc Framework is proposed - a methodology for T&E of indoor localization systems in semi-controlled environments based on a system-level and black-box approach. In contrast to building-wide testing, T&E in semi-controlled environments, such as test halls is characterized by lower costs, higher reproducibility, and better comparability of the results. The limitation of low transferability to real world applications is addressed by an application-driven design approach. The empirical validation of the T&E 4iLoc Framework, based on the examination of a contour-based Light Detection and Ranging ILS, an Ultra Wideband ILS, and a camera-based ILS for the application of Automated Guided Vehicles in warehouse operation, demonstrates the benefits of T&E with the T&E 4iLoc Framework.

Wi-Fi based localization has become one of the most practical methods for mobile users in location-based services. However, due to the interference of multipath and high-dimensional sparseness of fingerprint data, the localization system based on received signal strength (RSS) is hard to obtain high accuracy. In this paper, we propose a novel indoor positioning method, named JLGBMLoc (Joint denoising auto-encoder with LightGBM Localization). Firstly, because the noise and outliers may influence the dimensionality reduction on high-dimensional sparseness fingerprint data, we propose a novel feature extraction algorithm, named joint denoising auto-encoder (JDAE), which reconstructs the sparseness fingerprint data for a better feature representation and restores the fingerprint data. Then, the LightGBM is introduced to the Wi-Fi localization by scattering the processed fingerprint data to histogram, and dividing the decision tree under leaf-wise algorithm with depth limitation. At last, we evaluated the proposed JLGBMLoc on UJIIndoorLoc dataset and Tampere dataset, experimental results show that the proposed model increases the positioning accuracy dramatically comparing with other existing methods.

In this paper analyses the characteristic of EM waves propagation in structured environment to identify the signal interference by the structure, and suggests the EM waves attenuation model considering the distance and penetration loss by the structure. The range sensor based on electromagnetic(EM) waves attenuation along to the distance showed the precise distance estimation with high resolution depending on the distance. However, it is hard to use in structured environments due to the lack of consideration of the EM waves attenuation characteristics in the structured underwater environment. In this paper, EM waves propagation characteristic and signal interference effects by the structures were analyzed, and the EM waves distance-attenuation model in structured environment was suggested with sensor installation guideline. The EM waves propagation characteristics and proposed sensor model were verified by the several experiments, and the localization result in structured environment showed the more reliable performance.

Supply chain management requires regular updates of the location of assets, which can be enabled by low power wide area networks, such as Sigfox. While it is useful to localize a device simply by its communication signals, this is very difficult to do with Sigfox because of wide area and ultra narrowband nature. On the other hand, installing a satellite localization element on the device greatly increases its power consumption. We investigated using information about nearby Wi-Fi access points as a way to localize the asset over the Sigfox network, so without connecting to those Wi-Fi networks. This paper reports the location error that can be achieved by this type of outdoor localization. By using a combination of two databases, we could localize the device on all 36 test locations with a median location error of 39 m. This shows that the localization accuracy of this method is promising enough to warrant further study, most specifically the minimal power consumption.

Indoor positioning based on the received signal strength (RSS) of the WiFi signal has become the most popular solution for indoor localization. In order to realize the rapid deployment of indoor localization systems, solutions based on crowdsourcing have been proposed. However, compared to conventional methods, crowdsourced RSS values are more erroneous and can result in large localization errors. To mitigate the negative effect of the erroneous measurements, a graph-based semi-supervised learning (G-SSL) method is used to exploit the correlation between the RSS values at nearby locations to estimate an optimal RSS value at each location. Before using the G-SSL method, the Linear Regression (LR) algorithm is proposed to solve the device diversity problem in crowdsourcing system. Since the spatial distribution of the APs is sparse, the Compressed Sensing (CS) method is applied to precisely estimate the location of the APs. Based on the location of the APs and a simple signal propagation model, the RSS difference between different locations is calculated and used as an additional constraint to improve the performance of G-SSL. Furthermore, to exploit the sparsity of the weights used in the G-SSL, we use the CS method to reconstruct these weights more accurately and make a further improvement on the performance of the G-SSL. Experimental results show improved results in terms of the smoothness of the radio map and the localization accuracy.

The review aims to assess fifteen (15) academic literature sources, highlighting the application of machine learning algorithms in the maintenance operations of optical fiber networks. It exhibits the collection of data using PRISMA methodology—Preferred Reporting Item for Systems Review and Meta-Analyses. The application, results, and performance metrics are discussed based on the collected observations, computations, and statistics in the studies, which revealed records of high accuracy degrees ranging from 86% to 98% on average and quality ML models including Neural Networks (NNs), Support Vector Machines (SVMs), and LSTM, as well as deep learning models that disclosed effective results of determining challenges and problems within the optical fiber lines. The review mainly centralized on superior machine learning technologies that surpass traditional techniques in fault detection and localization for improved optical fiber networks’ operations while providing insights into the limitations and challenges encountered in real-world applications of these models, offering a comprehensive perspective on the optical fiber network’s domain.

(1) Background: Brassinosteroids (BRs) are an important hormone that participates in almost all stages of plant growth and development, and sterol dehydrogenase is a key enzyme that is involved in the biosynthesis of BRs. However, the steroid dehydrogenase gene family in Populus yunnanensis Dode (P. yunnanensis) has not been studied; (2) Methods: The PyDET2 gene family was identified and bioinformatics analyzed. Three genes were screened based on the RNA-seq of stem tip, the PyDET2e was further investigated by RT-qPCR (real-time quantitative polymerase chain reaction) and subcellular localization; (3) Results: We identified 14 DET2 family genes in P. yunnanensis that were classified into 4 groups according to sequence similarity and phylogenetic relationship, and 10 conserved protein motifs had been identified. The gene structure, chromosome distribution, collinearity, and codon preference of all PyDET2 genes identified in the genome of P. yunnanensis were analyzed. The codon of this family is biased to the end of A/U, and natural selection has a great influence on it. The expression level of PyDET2e in September was higher than in July, and it was significantly expressed in stems, stem tips, and leaves. The PyDET2e protein was localized in chloroplasts; (4) Conclusions: The PyDET2e is involved in the development of P. yunnanensis in the rapid growth stage. The systematic analysis provided a basis for the genome-wide identification of genes related to brassinolide biosynthesis processes in P. yunnanensis, and laid a foundation for the study on the mechanism of rapid growth of P. yunnanensis.

Some traditional robots are based on offline programming reciprocal motion, and with the continuous upgrading of vision technology, more and more tasks are replaced by machine vision. For the current problem of insufficient accuracy of robot target localization based on binocular vision, and an improved random sampling consistency algorithm is proposed to complete parallel robot target localization and grasping under the guidance For the current problem of insufficient accuracy of robot target localization based on binocular vision, an improved random sampling consistency algorithm is proposed to complete parallel robot target localization and grasping under the guidance of multi Firstly, the RANSAC algorithm is improved based on the SURF algorithm; then the parallax gradient method is applied to iterate the matched point pairs several times to further optimize the data; then the 3D reconstruction is completed by the program technique; finally the obtained data is finally the obtained data is input into the robot arm and the camera internal and external parameters are obtained by the calibration method so that the robot can accurately locate and The experiments show that the improved algorithm has advantages in recognition accuracy and grasping success rate under multi- The experiments show that the improved algorithm has advantages in recognition accuracy and grasping success rate under multi-vision system.

This review article is focused on the analysis of the state of the art of sensors for guided 9 ultrasonic waves for the detection and localization of impacts, therefore of interest for the structural 10 health monitoring (SHM). The recent developments in sensor technologies are then reported and 11 discussed through the many references in recent scientific literature. The physical phenomena re-12 lated to impact event and the main physical quantities are then introduced to discuss their im-13 portance in the development of the hardware and software components for SHM systems. An im-14 portant aspect of the article is the description of the different ultrasonic sensor technologies cur-15 rently present in the literature and what advantages and disadvantages they could bring, in relation 16 to the various phenomena investigated. In this context, the analysis of the front-end electronics is 17 deepened, the type of data transmission both in terms of wired and wireless technology and in terms 18 of online and offline signal processing. The integration aspects of sensors for the creation of net-19 works with autonomous nodes with the possibility of powering through energy harvesting devices 20 and the embedded processing capacity is also studied. Finally, the emerging sector of processing 21 techniques using deep learning and artificial intelligence concludes the review by indicating the 22 potential for the detection and autonomous characterization of the impacts.

Carbon fiber reinforced polymers (CFRP) are extensively employed in the aerospace industry due to their excellent properties. Delamination damage occurring at critical locations in CFRP can seriously reduce the safety of in-service components. The detection and localization of delamination damage using Lamb waves hold significant potential for widespread application in non-destructive testing. However, the choice of damage localization algorithm may produce different delamination damage localization results. This research presented an IRAPID (improved reconstruction algorithm for probabilistic inspection of defects) method derived from the ORAPID (original reconstruction algorithm for probabilistic inspection of defects) method, aiming to improve the accuracy and reliability of delamination damage localization. Three CFRP bending plates, including a healthy bending plate and two bending plates with delamination damage sizes of Φ20 mm and Φ40 mm, were prepared in the experiment, respectively. The detection experiment of the CFRP bending plate using lead zirconate titanate (PZT) as a transducer to excite and receive Lamb waves was conducted, and the influence of excitation signal frequency on the performance of the proposed method was discussed. Under the condition of excitation signal frequency of 220 ~ 320 kHz and step size of 10 kHz, the accuracy of the delamination damage localization method proposed in this paper was compared with that of the existing methods. The experimental results indicate that the IRAPID algorithm exhibits good stability in the localization of delamination damage across the frequency variations range considered. The localization error of the IRAPID algorithm for delamination damage is significantly lower than that of the DaS (delay-and-sum) algorithm and the ORAPID algorithm. As the size of the delamination damage increases, so does the localization error. The accuracy of delamination damage localization is lower in the X-axis direction than in the Y-axis direction. By averaging the localization results across various frequencies, we can mitigate the potential localization errors associated with single-frequency detection to a certain extent. For the localization of delamination damage, Lamb waves at multiple frequencies can be employed for detection, and the detection results at each frequency are averaged to enhance the reliability of localization.

This research paper investigates ultra-wideband (UWB) localization systems by focusing on the use of average filter (AVG), Kalman filter (KF), and extended Kalman filter (EKF) algorithms, as well as a novel integrated filtering method that incorporates low-pass filter (LPF) into AVG, KF, and EKF. The study aims to improve localization loss in indoor environments using a TurtleBot robot equipped with a camera to observe ground truth positions. To evaluate the effectiveness of the proposed algorithms, a comprehensive comparison of the raw and filtered data with the camera-based ground truth observations is performed. Quantitative analyses of the results, including max, min, max-min, and mean error, are performed to evaluate the localization performance of the algorithms and the integrated filtering method. The results reveal that the integrated filtering method has performed better accuracy in comparison with existing methods.

Model-based approaches form the basis of the majority of damage detection and localization studies; however, built-in online detection technique can offer an alternative for future structural health monitoring technologies. Thus, in this paper, we present a dynamic localization algorithm for damage localization in functionally graded plates. The method depends on the creation of a grid matrix that contains the dynamic response of the structure over time. Subsequently, an optimization process is carried out via a linear equation representing the information contained within the grid to achieve accurate localization of damage. Due to the inherent sparsity of the localization nature, the FISTA algorithm has been employed as a problem solver. The approach is tested in the case of the functionally graded plate under clamped free boundary conditions. Several, damage scenarios were investigated for the case of damage signals on and off the grid. The results show that the proposed approach is capable of accurately predicting damage position and can be suitable for use in low size data systems.

Wireless sensor networks (WSN) are mostly utilized in many applications. Indeed, WSN is composed of sensors to evaluate some physical phenomena. However, the information brought by the sensor still missed if we don't know the exact location of the event. Several localization algorithms have been proposed in order to locate the nodes in WSN. The localization algorithms are categorized into range-based and range-free techniques. The range-based techniques use either distance or time to calculate the coordinates of unknown nodes. Nevertheless, those kinds of techniques need some additional material in computation purpose. Therefore, range-based techniques present an expensive solution for positioning in WSN. Alternatively, range-free techniques may do the same task without involving additional material. But they don’t offer a high precision of localization in comparison with range-based techniques. DVHOP is the most popular range-free technique that uses the hop count method in the localization process. In this work, we propose an improvement of DVHOP localization algorithm to create three improved versions of this algorithm and we have achieved that by adopting two meta-heuristic (simulated annealing, particle swarm optimization) and FMINCON solver dedicated to the optimization in the field of WSN nodes localization. The experimental results obtained in this work show clearly the gain and the good impact of our proposition.

In recent years, several Ultrawideband (UWB) localization systems have already been proposed and evaluated for accurate position estimation of pedestrians. However, most of them are evaluated for a particular wearable sensor position; hence the accuracy obtained is subject to a given wearable sensor position. In this paper, we study the effects of body wearable sensor positions i.e., chest, arm, ankle, wrist, thigh, fore-head, hand, on the localization accuracy. The conclusion drawn is that the fore-head is the best, and the chest is the worst body sensor location for tracking a pedestrian. While the fore-head position is able to set an error lower than 0.35 m (90th percentile), the chest is able to set 4 m. The reason for such a contrast in the performance lies in the fact that in NLOS situations, the chest as an obstacle is larger in size and thickness than any other part of the human body, which the UWB signal needs to overcome to reach the target wearable sensor. And so, the large errors arise due to the signal arriving at the target wearable sensor from reflections of a nearby object or a wall in the environment.

The development and generalization of Digital Volume Correlation (DVC) on X-ray computed tomography data highlight the issue of long term storage. The present paper proposes a new model-free method for pruning the DVC data. The size of the remaining sampled data can be user-defined, depending on the needs concerning storage space. The data pruning procedure is deeply linked to hyper-reduction techniques. The DVC data of a resin-bonded sand tested in uniaxial compression is used as an illustrating example. The relevance of the pruned data is tested afterwards for model calibration. A new Finite Element Model Updating (FEMU) technique coupled with an hybrid hyper-reduction method is used to successfully calibrate a constitutive model of the resin bonded sand with the pruned data only.

Equal-Channel Angular Pressing (ECAP) is a method used to introduce severe plastic deformation into a metallic billet without changing its geometry. In special cases strain localization occurs and a pattern consisting of regions with high and low deformation (so-called shear and matrix bands) can emerge. This paper studies this phenomenon numerically adopting two-dimensional finite element simulations of one ECAP pass. The mechanical behavior of aluminum is modeled using phenomenological plasticity theory with isotropic or kinematic hardening. The effects of the two different strain hardening types are investigated numerically by systematic parameter studies: While isotropic hardening only causes minor fluctuations in the plastic strain fields, a material with high initial hardening rate and sufficient strain hardening capacity can exhibit pronounced localized deformation after ECAP. The corresponding finite element simulation results show a regular pattern of shear and matrix bands. This result is confirmed experimentally by ECAP-processing of AA6060 material in a severely cold worked condition, where microstructural analysis also reveals the formation of shear and matrix bands. Excellent agreement is found between the experimental and numerical results in terms of shear and matrix band width and length scale. The simulations provide additional insights regarding the evolution of the strain and stress states in shear and matrix bands.

The mitigation of NLOS (non-line-of-sight) propagation conditions is one of main challenges in wireless signals based indoor localization. When RFID localization technology is applied in applications, RSS fluctuates frequently due to the shade and multipath effect of RF signal, which could result in localization inaccuracy. In particularly, when tags carriers are walking in LOS (line-of-sight) and NLOS hybrid environment, great attenuation of RSS will happen, which would result in great location deviation. The paper proposes an IMU-assisted (Inertial Measurement Unit) RFID based indoor localization in LOS/NLOS hybrid environment. The proposed method includes three improvements over previous RSS based positioning methods: IMU aided RSS filtering, IMU aided LOS/NLOS distinguishing and IMU aided LOS/NLOS environment switching. Also, CRLB (Cramér-Rao Low Bound) is calculated to prove theoretically that indoor positioning accuracy for proposed method in LOS/NLOS mixed environment is higher than position precision of only use RSS information. Simulation and experiments are conducted to show that proposed method can reduce the mean positioning error to around 3 meters without site survey.

Human visual system (HVM) can quickly localize the most salient object in scenes, which has been widely applied on natural image segmentation [15]-[19]. In ultrasound (US) breast images, compared with background areas, tumor is more salient because of its higher contrast. In this paper, we develop a novel automatic localization method based on HVM for automatic segmentation of ultrasound (US) breast tumors. First, the input image is smoothed by convolution with a linearly separable Gaussian filter and then subsampled into a 9-layer Gaussian pyramid. Then intensity, blackness ratio, and superpixel contrast features are combined to compute saliency map, in which Winner Take All algorithm is used to localize the most salient region, presenting with a circle on the localized target. Finally the circle is taken as the initial contour of CV level set to finish the extraction of breast tumor. The localization method has been tested on 400 US beast images, among which 378 images have higher saliency than background areas and succeed in localization, with high accuracy 92.00%. The HVM localization method can be used to localize the tumors, combined with this method, CV level set can achieve the fully automatic segmentation of US breast tumors. By combing intensity, blackness ratio and superpixel contrast features, the proposed localization method can successfully avoid the interference caused by background areas with low echo and high intensity. Moreover, multi-object localization of US breast images can be considered in future employment.

Background: Visceral leishmaniasis affects approximately 12 million people worldwide. Current existing drugs cause several side effects and resistance, the identification of new therapeutic targets for the development of new drugs is necessary. The vesicular trafficking in the parasite flagellar pocket is essential for parasite survival and proliferation, but little is known about the proteins involved in the endocytic/secretory pathways. In this work, we are describing the characterization of a transporter cargo protein SFT-2/Got-1 like in Leishmania infantum. Material and Methods: Using bioinformatics tools, the putative Got-1 protein A4HSK3 was characterized structurally and phylogenetically. Molecular biology was used to clone and express the protein and confocal fluorescence to determine its subcellular localization. Results: The Got-1 like protein presents four alpha helix TM conserved domains (aa38-aa147) characteristics of the Got-1/SFT-2 family proteins and an important Pen-2 conserved motif LGDYXXF located in the extracellular loop. Confocal microscopy suggests that Got-1/SFT-2 like is localized in the flagellar pocket, and is partially co-localized with the L. infantum presenilin-like protein. Phylogenetically, the Leishmania sp Got-1 like is contained in a subgroup of proteins clearly detached from the other Trypanosomatidae, such as T. cruzi and T. brucei. Conclusions: Our data show the presence of an important transported proteins, and its colocalization with the presenilin aspartyl protease in the flagellar pocket of the L. infantum open new perspectives to identify novel targets, which can be an alternative therapeutic strategy against leishmaniasis.

The use of unmanned aerial vehicle (UAV) during emergency response of a disaster has been widespread in recent years and the terrain images captured by the cameras on board these vehicles are significant sources of information for such disaster monitoring operations. Thus, analyzing such images are important for assessing the terrain of interest during such emergency response operations. Further, these UAVs are mainly used in disaster monitoring systems for the automated deployment of sensor nodes in real time. Therefore, deploying and localizing the wireless sensor nodes optimally, only in the regions of interest that are identified by segmenting the images captured by UAVs, hold paramount significance thereby effecting their performance. In this paper, the highly effective nature-inspired Plant Growth Simulation Algorithm (PGSA) has been applied for the segmentation of such terrestrial images and also for the localization of the deployed sensor nodes. The problem is formulated as a multi-dimensional optimization problem and PGSA has been used to solve it. Furthermore, the proposed method has been compared to other existing evolutionary methods and simulation results show that PGSA gives better performance with respect to both speed and accuracy unlike other techniques in literature.

Keywords: Electrical power systems, Support vector machines, Random Forest, Machine learning, Wavelet transform, Transmission lines fault, Electrical power quality, Short circuit, Classification of faults, Localization of faults, Decision trees, Ensemble learning, K-nearest neighbors.

The communication link between the base station and the mobile sensor networks, such as multi-agent systems for collaborative tasks which include ground mobile robots and drones, is crucial for localization and success of tasks in indoor environments. The Power-domain Non-Orthogonal Multiple Access (P-NOMA) is an emerging multiplexing technique that enables the base station to accumulate signals for different agents using the same time-frequency channel. The environment information such as distance from the base station is required at the base station to calculate communication channel gains and allocate suitable signal power to each agent. The accurate estimate of the position for power allocation of P-NOMA in a dynamic environment is challenging due to changing location of the end-agent and shadowing. In this paper, we take advantage of the two-way Visible Light Communication (VLC) link to: (1) estimate the position of the end-agent in a real-time indoor environment based on the signal power received at the base station and (2) allocate resources using the Simplified Gain Ratio Power Allocation (S-GRPA) scheme with the look-up table method. In addition, we use the Euclidean Distance Matrix (EDM) to estimate the location of the end-agent whose signal was lost due to shadowing.

Transcutaneous injection laryngoplasty is a well-known procedure for treating paralyzed vocal fold by injecting augmentation material into it. Hence, vocal fold localization plays a vital role in the preoperative planning as the fold location is required to determine the optimal injection route. In this communication, we propose a mirror environment based reinforcement learning (RL) algorithm for localizing the right and left vocal folds in preoperative neck CT. RL-based methods commonly showed noteworthy outcome in general anatomic landmark localization problem in the recent years. However, such methods suggest training individual agent for localizing each fold, though the right and left vocal folds are located in close proximity and have high feature-similarity. Utilizing the lateral symmetry between the right and left vocal folds, the proposed mirror environment allows for a single agent for localizing both the folds by treating the left fold as a flipped version of the right fold. Thus, localization of both folds can be trained using a single training session which utilizes the inter-fold correlation and avoids redundant feature learning. Experiment with 120 CT volumes showed improved localization performance and training efficiency of the proposed method compared with the standard RL method.

This paper focused on impact localization of composite structures, which possess more complexity in the guided wave propagation because of the anisotropic behavior of composite materials. In this work, a composite plate was manufactured by using a compression molding process with proper pressure and temperature cycle. Eight layers of woven composite prepreg were used to manufacture the composite plate. A structural health monitoring (SHM) technique is implemented with piezoelectric wafer active sensors (PWAS) to detect and localize the impact on the plate. There are two types of impact event are considered in this paper (a) low energy impact event (b) high energy impact event. Two clusters of sensors recorded the guided acoustic waves generated from the impact. The acoustic signals are then analyzed using a wavelet transform based time-frequency analysis. The proposed SHM technique successfully detect and localize the impact event on the plate. The experimentally measured impact locations are compared with the actual impact locations. An immersion ultrasonic scanning method was used to visualize the composite plate before and after the impact event. A high frequency 10 MHz 1-inch focused transducer was used to scan the plate in the immersion tank. Scanning results show that there is no visible manufacturing damage in the composite plate. However, clear impact damage was observed after the high-energy impact event.

Postoperative adhesive arachnoiditis is an inflammatory response of the spinal leptomeninges that occurs after surgery, resulting in scar formation in the avascular nature of the arachnoid layer. Clinical manifestations of this condition include pain, sensory deficits, motor dysfunction, reflex abnormalities, and bladder/bowel impairments. In MRI scans, the signs of postoperative adhesive arachnoiditis can vary, but some specific indicators can assist surgeons in locating the lesion and planning surgical interventions more accurately. In this report, we reported a 37-year-old man with postoperative adhesive arachnoiditis after two surgeries for Chiari I malformation, demonstrating that the gradually-forming the delta cord sign with sequential syringomyelia. During the intraoperative examination, we identified the presence of the delta cord sign, which was formed by an arachnoid scar that was tethering the dorsal spinal cord to the dura. This discovery allowed us to precisely pinpoint the location of the arachnoid scar, thereby providing valuable guidance to avoid any unnecessary exploration of innocent structures during the procedure. Other localization signs were also reviewed.

We recently found that in human osteoblasts Homer1 complexes to CaSR and mediates AKT initiation via mTORC2 leading to beneficial effects in osteoblasts including -catenin stabilization and mTORC1 activation (doi: 10.1074/jbc.RA118.006587). Herein we further investigated the relationship between Homer1 and CaSR and demonstrate a link between the protein levels of CaSR and Homer1 in human osteoblasts in primary culture. Thus, when siRNA was used to suppress the CaSR, we observed upregulated Homer1 levels and when siRNA was used to suppress Homer1 we observed downregulated CaSR protein levels using immunofluorescence staining of cultured osteoblasts as well as western blot analyses of cell protein extracts. This finding was confirmed in vivo as the bone cells from osteoblast specific CaSR(-/-) mice showed increased Homer1 expression compared to wild-type. Furthermore, when the commonly used osteosarcoma cell lines MG63 and SAOS-2 were compared to primary osteoblasts, higher levels of Homer1 protein were associated with increased protein levels of the CaSR as well as mTOR and Rictor. CaSR and Homer1 protein were both expressed in osteocytes embedded in the long bones of wild-type mice, and immunofluorescent studies of these cells revealed that Homer1 protein sub-cellular localization was markedly altered in the osteocytes of CaSR(-/-) mice compared to wt. The study identifies additional roles for Homer1 in the control of the protein level and subcellular localization of CaSR in cells of the osteoblast lineage, in addition to its established role of mTORC2 activation downstream of the receptor.

In this paper, the methods and their analysis for estimating the location of three dimension (3-D) single source buried in lossy medium are presented with uniform circular array (UCA). The mathematical model of the signal in the lossy medium is proposed. Using location information in the covariance matrix obtained by sensors’ output, the equations of the source location (azimuth angle, elevation angle and range) are obtained. The phase and amplitude of the covariance matrix function are used to process these equations respectively. Then, the phase and amplitude of the covariance matrix function are used to process the source localization in the conductive medium together. By analyzing the characteristics of the proposed methods and MUSIC method, the computational complexity and the valid range of these methods are given. From the results, whether the loss is known, we can choose the appropriate method to process the issues (localization in lossless medium or lossy medium).

The weighted K-nearest neighbors (WKNN) algorithm has been widely used in indoor fingerprint localization, which utilizes fingerprint distance (FD) of pairwise positions to discriminate the physical distance (PD) between them. However, due to the varied states of different wireless access points (APs), their contribution to FD discrimination capability varies. In our study, we analyzed several critical causes that affect APs’ contribution, including AP’s health state, the distance, and the direction between APs and position pairs. Inspired by these insights, a threshold was set for all sample RSS to eliminate the impact of abnormal APs on FD, and a correction quantity for each RSS was provided by the distance between APs and sample positions to reduce the strong signal influence on FD. Furthermore, a priority weight was designed by RSS differences (RSSD) to further optimize FD’s capability to discriminate PD. Integrating the above policies, a new indoor fingerprint localization technique is redefined, referred to FD’s discrimination capability improvement WKNN (FDDC-WKNN), which is suitable for indoor scenes with a large number of APs that are not uniformly managed. Our simulation results show that the correlation and consistency between FD and PD are well improved, with strong correlation increasing from 0 to 76% and high consistency increasing from 26% to 99%, which confirms that the proposed policies can greatly enhance FD’s discrimination capabilities to PD, and we also found that abnormal APs can cause significant impact on FDs’ discrimination Capability. Further, by implementing the FDDC-WKNN algorithm in experiments, we obtained the optimal K value in both the simulation scene and real library scene, under which the average localization errors have been reduced from 2.2732m to 1.2183m and from 3.4295m to 2.2068m, respectively. In addition, compared to not using the FDDC-WKNN, the cumulative distribution function (CDF) of the localization errors curve converged faster and the errors fluctuation is smaller, which demonstrate FDDC-WKNN having stronger robustness and more stable localization performance to the state of APs in indoor environments.

In areas where conventional fundus cameras are logistically unaffordable, the smartphone-based approach is considered as a promising future of glaucoma screening due to their affordability and ease-of-use. Optic disc localization is a critical stage during glaucoma screenings. For fundus images captured with standard fundus cameras, the majority of the models available out there can locate the optic disc with satisfactory performance. However, for images that are captured with smartphone-based fundus cameras, the inherent noise and lower quality of the fundus image makes it difficult for models to detect the optic disc region. In this study, we have proposed to utilize YOLOv8n for optic disc localization due to the model’s cutting-edge performance in diverse tasks and its lightweight nature. We have used a public dataset which has 2000 low quality fundus images that are captured using a smartphone-based fundoscopy device. From these, 60% of the data was used for fine-tuning the model, and 25% for testing. By using a confidence of 50% set as threshold, the model was able to detect the optic disc successfully on over 97% of test images with intersection over union of above 0.85. These results highlight the potential of the lightweight YOLOv8n model for deployment on resource-constrained environments, offering a promising performance on accurately localizing the OD and enhancing the feasibility of affordable glaucoma screening on smartphones.

Classical models of gene expression were built using genetics and biochemistry. Although these approaches are powerful, they have very limited consideration of the spatial and temporal organization of gene expression. Although the spatial organization and dynamics of RNA polymerase II (RNAPII) transcription machinery has fundamental functional consequences for gene expression, its detailed studies have been for long time abrogated by the limits of classical light microscopy. The advent of super-resolution microscopy (SRM) techniques allowed for the visualization of the RNAPII transcription machinery with nanometer resolution and millisecond precision. In this review, we summarize the recent methodological advances in SRM, focus on its application for studies of the nanoscale organization in space and time of RNAPII transcription, and discuss its consequences for the mechanistic understanding of gene expression.

This paper presents an optimized feature-centered reflection symmetry axis detection and localization framework for object perception. The proposed framework is formed to obtain an improved reflection symmetry axis based on the salient symmetry feature. It starts with a refined Multi-scale Saliency Symmetry Model (MSSM), which is realized by applying isotropic symmetry operator on salient points in scale-space rather than all pixels. In each scale, salient points are initially extracted as local extremal from an image, and they are further refined by a multi-scale implementation for generating salient symmetry feature maps. A Symmetric Transformation Matrix is then computed using the optimal feature matching pairs, which can be explicitly used as an abstract representation of the constraint regions of symmetry objects in an image to optimize the performance of the potential symmetry axis detection. The framework has been investigated experimentally both on the classical dataset from a symmetry detection challenge and the latest dataset. It has shown that the framework can get a better or comparative result and also can be further adapted into terminated human--computer equipment for reflection symmetry object perception and tracking.

Lamb wave-based structural health monitoring is widely acknowledged as a reliable 11 method for damage identification, classification, localization and quantification. However, due to 12 the complexity of Lamb wave signals, especially after interacting with structural components and 13 defects, interpreting these waves and extracting useful information about the structure's health is 14 still a major challenge. However, deep learning-based strategy offers a great opportunity to address 15 such challenges as the algorithm can operate directly on raw discrete time-domain signals. Unlike 16 traditional methods, which often require careful feature engineering and preprocessing, deep learn-17 ing can automatically extract relevant features from the raw data. This paper proposes an autoen-18 coder based on a bidirectional long short-term memory network with maximal overlap discrete 19 wavelet transform layer to detect the signal anomaly and determine the location of the damage in 20 the composite structure. This approach has the potential to greatly enhance our ability to detect and 21 locate structural damage in composite structures, thereby increasing safety and efficiency.

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) spike protein binds to the cell receptor angiotensin-converting enzyme-2 (ACE2) as the first step in viral cell entry. SARS-CoV-2 spike protein expression in ACE2-expressing cell surface induces cell–cell membrane fusion, thus forming syncytia. To exert its fusiogenic activity, the spike protein is typically processed at a specific site (S1/S2 site) by cellular proteases such as furin. The C488 residue, located at the spike–ACE2 interacting surface, is critical for the fusiogenic and infectious roles of the SARS-CoV-2 spike protein. We further demonstrated that the C488 residue of spike protein is involved in subcellular targeting and S1/S2 processing. C488 mutant spike localization to the Golgi apparatus and cell surface were impaired. Consequently, the S1/S2 processing of the spike protein, probed by anti-Ser-686-cleaved spike antibody, markedly decreased in C488 mutant spike proteins. Moreover, brefeldin A-mediated endoplasmic reticulum-to-Golgi traffic suppression also suppressed spike protein S1/S2 processing. As brefeldin A treatment and C488 mutation inhibited S1/S2 processing and syncytia formation, the C488 residue of spike protein is required for functional spike protein processing.

The formation and localization of sporadic E(Es) layers predicted by the ions vertical drift velocity and its vertical change in the lower thermosphere during nighttime are shown analytically and by numerical simulations. The consideration of existence of a minimum negative value of the vertical change of the ions vertical drift velocity as a necessary condition of formation of Es layer and determining ions convergence rate into this layer, is extended in case of the presence of vertical wind. Upward vertical wind can shift the convergence regions upward, while downward vertical wind shift them downward, unlike the cases of presence of only meridional and zonal winds. It also changes the ion convergence rate compared to the one with just a horizontal wind. It is shown for the first time that the upward constant wind also causes the convergence of ions with maximum rate in the region where the ion-neutral collision frequency is equal to their cyclotron frequency. While demonstrating the presented theory by numerical simulations, HWM14 data is used for the meridional and zonal wind velocity profiles and the presence of its vertical component is assumed. In this case, in addition to the estimated ion drift velocity and its vertical changes, their initial distribution and ambipolar diffusion also determine the development of ion convergence/divergence processes. For small magnitude of vertical wind velocity, its significant influence on the ions/electrons behavior is demonstrated, which shows the importance of both tidal wind and wind changes caused by the propagation of atmospheric gravity waves on the formation of the Es layer. In this theoretical research it is shown that the realistic profile of the wind velocity, which takes into account the vertical component along with its zonal and meridional ones, is important for prediction of the Es layers formation, as well as regions of ion depletion.

The sTetro is a stair cleaning robot which can climb the staircase with its shapeshifting capabilities. As this robot is intended to traverse multi-floor environment autonomously, hence its localization/positioning information is an essential component of the overall system. Usually, the indoor mobile robots rely on some external system for localization information, e.g., WiFi, UWB, vision, RFID signals, or indoor Global Positioning System (GPS). This requires the installation of additional hardware and/or modification of the working environment for precise positioning information of the mobile platform. As the dimensions of the staircase are known a priori, this knowledge can be used to localize the sTetro robot on the stairs. In this article, the geometry of the staircase has been exploited to localize the robot in 3D space with measurements from the onboard time-of-flight (ToF) range sensors only. The heading angle of the robot is also estimated with two ToF sensors installed in front of the sTetro robot. Results achieved by conducting experiments on real robot prove the efficacy of the proposed approach.

Currently there are fewer depth models applied to pepper picking detection, while the existing generalized neural networks have problems such as large model parameters, long training time, and low model accuracy.In order to solve the above problems, this paper proposes a Yolo-chili target detection algorithm for chili pepper detection. First, the classical target detection algorithm yolov5 is used as a benchmark model, and an adaptive spatial feature pyramid structure combining the attention mechanism and the idea of multi-scale prediction is introduced to improve the model's detection effect on occluded peppers and small target peppers. Secondly, a three-channel attention mechanism module is introduced to improve the algorithm's long-distance recognition ability and reduce the interference of redundant testers. Finally, the quantized pruning method is used to reduce the model parameters and realize the lightweight processing of the model. Applying the method to the homemade chili pepper dataset, the AP value of chili pepper reaches 93.11%; the accuracy rate is 93.51% and the recall rate is 92.55%.The experimental results show that yolo-chili is able to achieve accurate and real-time pepper detection under complex orchards.

Among others, UWB-based multi anchor localization systems have been established for industrial indoor localization systems. However, multi anchor systems have high costs and installation effort. By exploiting the multipath propagation of the UWB signal, the infrastructure and thus the costs of conventional systems can be reduced. Our UWB Single Anchor Localization System (SALOS) successfully pursues this approach. The idea behind SALOS is to create a localization system with a sophisticated signal modeling. Therefore, neither measured reference like fingerprinting nor training is required for position estimation. Although SALOS has been implemented and tested successfully already in an outdoor scenario with multipath propagation, it has not yet been evaluated in indoor environment with challenging and hardly predictable multipath propagation. For this purpose, we have developed new algorithms for the existing hardware mainly a three-dimensional statistical multipath propagation model for arbitrary spatial geometries. The signal propagation between the anchor and predefined candidate points for the tag position is modeled in path length and complex-valued receive amplitudes. For position estimation, these modeled signals are combined to multiple sets and compared to UWB measurements via a similarity metric. In the end, a majority decision of multiple position estimates is performed. For evaluation, we implement SALOS in a modular fashion and install the system in a building. For a fixed grid of 20 positions, SALOS is evaluated in terms of position accuracy. The system results in correct position estimations for more than 73% of the measurements.

In the field of low power wireless networks, one of the techniques on which many researchers are putting their efforts is related to positioning methodologies such as fingerprinting in dense urban areas. This paper presents an experimental study aimed at quantifying the mean location estimation error in densely urbanized areas.Using a dataset made available by the University of Antwerp, a neural network was implemented with the aim of providing the position of the end-devices. In this way it was possible to measure the mean location estimation error in an area with high urban density. The results obtained show an accuracy in the localization of the end-device of less than 150 meters.This result would make it possible to use the fingerprint instead of alternative, energy consuming, methodologies such as GPS in IoT (Internet of Things) applications where battery life is the primary requirement to be met.

Falls, highly common in the constantly increasing global aging population, can have a variety of negative effects on their health, well-being, and quality of life, including restricting their capabilities to conduct Activities of Daily Living (ADLs), which are crucial for one’s sustenance. Timely assistance during falls is highly necessary, which involves tracking the indoor location of the elderly during their diverse navigational patterns associated with ADLs to detect the precise location of a fall. With the decreasing caregiver population on a global scale, it is important that the future of intelligent living environments can detect falls during ADL.s while being able to track the indoor location of the elderly in the real world. Prior works in these fields have several limitations, such as – the lack of functionalities to detect both falls and indoor locations, high cost of implementation, complicated design, the requirement of multiple hardware components for deployment, and the necessity to develop new hardware for implementation, which make the wide-scale deployment of such technologies challenging. To address these challenges, this work proposes a cost-effective and simplistic design paradigm for an Ambient Assisted Living system that can capture multimodal components of user behaviors during ADLs that are necessary for performing fall detection and indoor localization in a simultaneous manner in the real world. Proof of concept results from real-world experiments are presented to uphold the effective working of the system. The findings from two comparison studies with prior works in this field are also presented to uphold the novelty of this work. The first comparison study shows how the proposed system outperforms prior works in the areas of indoor localization and fall detection in terms of the effectiveness of its software design and hardware design. The second comparison study shows that the cost for the development of this system is the least as compared to prior works in these fields, which involved real-world development of the underlining systems, thereby upholding its cost-effective nature.

Patients with COVID-19 may develop pneumonia, severe symptoms of acute respiratory distress syndrome, and multiple organ failure. Nevertheless, the variety of forms of this disease, requires further research on the pathogenesis of this disease. Based on the analysis of published data on the concentrations of SARS-CoV-2 in biological fluids of the nasopharynx, lungs and intestines and using a developed modular model of the virus distribution in human tissue and organs, an assessment of the SARS-CoV-2 reproduction in various compartments of the body is presented. Most of viral particles can enter into the esophagus from nasopharynx. Entering viral particles into the gastrointestinal tract will obviously be accompanied by infection of the intestinal epithelium and accumulation of the virus in the intestinal lumen in an amount proportional their secretory and protein-synthetic activities. The relatively low concentration of SARS-CoV-2 in tissues implies an essential role of transport processes and redistribution of the virus from nasopharynx and intestines to lungs. The model simulations also supposes that sanitation of the nasopharynx mucosa at the initial stage of the infectious process considering inhibition of the virus accumulation by means of cellular and humoral responses has prospects for the use in medicine practice.

This paper presents a novel approach for indoor acoustic source localization using microphone arrays and based on a Convolutional Neural Network (CNN). The proposed solution is, to the best of our knowledge, the first published work in which the CNN is designed to directly estimate the three dimensional position of an acoustic source, using the raw audio signal as the input information avoiding the use of hand crafted audio features. Given the limited amount of available localization data, we propose in this paper a training strategy based on two steps. We first train our network using semi-synthetic data, generated from close talk speech recordings, and where we simulate the time delays and distortion suffered in the signal that propagates from the source to the array of microphones. We then fine tune this network using a small amount of real data. Our experimental results show that this strategy is able to produce networks that significantly improve existing localization methods based on SRP-PHAT strategies. In addition, our experiments show that our CNN method exhibits better resistance against varying gender of the speaker and different window sizes compared with the other methods.

(1) Background: This retrospective study aimed to compare the efficacy and safety of one-stage computed tomography (OSCT)- to that of two-stage computed tomography (TSCT)-guided localization for the surgical removal of small lung nodules. (2) Methods: We collected data from patients with ipsilateral pulmonary nodules who underwent localization before surgical removal at Veteran General Hospital Kaohsiung between October 2017 and January 2022. The patients were divided into the OSCT and TSCT groups. (3) Results: We found that OSCT significantly reduced the localization time and risky time compared to TSCT, and the success rate of localization and incidence of pneumothorax were similar in both groups. However, the time spent under general anesthesia was longer in the OSCT group than in the TSCT group. (4) Conclusions: The OSCT-guided approach to localize pulmonary nodules in hybrid operation room is a safe and effective technique for the surgical removal of small lung nodules.

The ongoing COVID-19 pandemic dictated new priorities in biomedicine research. Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the causative agent of COVID-19, is a single-stranded positive-sense RNA virus. In this pilot study, we optimized our padlock assay to visualize genomic/subgenomic regions using formalin-fixed paraffin-embedded placental samples obtained from a confirmed case of COVID-19. SARS-CoV-2 RNA was localized in trophoblastic cells. We also checked the presence of the virion by immunolocalization of its glycoprotein spike. In addition, we imaged mitochondria of placental villi keeping in mind that the mitochondrion has been suggested as a potential residence of the SARS-CoV-2 genome. Indeed, we observed a substantial overlapping of SARS-CoV-2 RNA and mitochondria in trophoblastic cells. This intriguing linkage correlated with an aberrant mitochondrial network. Overall, to our knowledge, this is the first study that provides the evidence of a co-localization of the SARS-CoV-2 genome and mitochondria in SARS-CoV-2 infected tissue. These findings also support the notion that SARS-CoV-2 infection could reprogram mitochondrial activity in highly specialized maternal/fetal interface.

Mini-drones can be used for a variety of tasks, such as weather monitoring, package delivery, search and rescue, and recreation. Their uses are mostly restricted to outside locations with access to the Global Positioning System (GPS) and/or similar systems since their usefulness, safety, and performance substantially rely on ubiquitously accurate positioning and navigation. Indoor localization is getting better, thanks to technologies like Visual Simultaneous Localization and Mapping (V-SLAM). However, more advancements are still required for mini-drone navigation applications with greater safety standards. In this research, a novel method for enhancing indoor mini-drone localization performance is proposed. By merging Oriented Rotated Brief SLAM (ORB-SLAM2), Semi-Direct Monocular Visual Odometry (SVO), and an Adaptive Complementary Filter, the suggested strategy improves V-SLAM approaches (ACF). The findings demonstrate that, when compared to other widely-used indoor localization algorithms, the suggested methodology performs better at estimating location under various situations (low light, low texture, and dynamic environments).

Our prior studies have shown that B type Natriuretic Peptide (BNP) decreases absorption from the gastrointestinal (GI) tract. Since non-muscle myosin-type II (NMM-II) is known to have a role in epithelial tight junction regulation, we aimed to test whether BNP has an effect on the localization and expression of NMM-II in the intestinal villi. We treated wild type mice with a 10 ng/g intravenous bolus of BNP followed by infusion of BNP at 1ng/g/minute vs. vehicle control. The mice were then euthanized and intestinal tissue isolated and sectioned. The tissue was immune-stained for NMM-II and examined using fluorescence microscopy. The tissue section not treated with antibody to NMM-II was used as a methodological control to evaluate the non-specific binding. Scanning electron micrographic images were taken to compare structural differences between the two groups. Western blotting was performed to compare the regional protein expression of NMM-II and associated proteins including smooth muscle actin, kinesin, and E cadherin in small intestinal tissue between BNP vs. vehicle infused mice. Fluorescence microscopy revealed markedly increased localization of NMM-II at the crypts and core of intestinal villi of the jejunum, ileum and colon of BNP treated mice compared to vehicle. Transmission electron microscopy revealed that the microvilli of BNP treated mice assumed the distinctive appearance of ‘relaxed’ microvilli compared to vehicle. Such decrease in contractility was previously shown to decrease para-cellular permeability of epithelia. Our observation indicates that BNP alters the localization of NMM-II in intestinal villi and makes the intestinal villi structures assume a state of decreased permeability of the apical junctional complex. Further characterization of this process and understanding the specific mediators involved could lead to the identification of novel therapeutic targets for various disease states such as heart failure and malabsorption.

Imaging of the ocular vasculature can provide new insights into the pathophysiology of ocular diseases. This study proposes a novel high-frequency super-resolution ultrasound localization microscopy (SRULM) technique and evaluates its ability to measure in vivo perfusion changes in the rat eye at elevated intraocular pressure (IOP). A 38.4 MHz center frequency linear array transducer on a VisualSonics Vevo F2 imaging platform was used to collect high frame rate (1 kHz) radiofrequency data of the posterior rat eye following systemic microbubble contrast injection. Following clutter and spatiotemporal non-local means filtering, individual microbubbles were localized and tracked. The microbubble tracks were accumulated over 10,000 frames to generate vascular images quantifying perfusion velocity and direction. Experiments were performed using physiologic relevant controlled flow states for algorithm validation and subsequently performed in vivo on the rat eye at 10 mm Hg IOP increments from 10 to 60 mm Hg. The posterior vasculature of the rat eye, including the ophthalmic artery, long posterior ciliary arteries and their branches, central retinal artery and retinal arterioles and venules were successfully visualized, and velocities quantified at each IOP level. Significant reductions in arterial flow were measured as IOP was elevated. High-frequency SRULM can be used to visualize and quantify perfusion velocity of the rat eye in both the retrobulbar and intraocular vasculature simultaneously. The ability to detect ocular perfusion changes throughout the depth of the eye may help elucidate the role ischemia has in the pathophysiology of ocular diseases such as glaucoma.