Arylmagnesium and -calcium reagents are easily accessible, however, ether degradation processes limit the storability especially of the calcium-based heavy Grignard reagents. Ortho-bound substituents with phosphanyl donor sites usually block available coordination sites and stabilize such complexes. The reaction of bromo-2,6-bis(diphenylphosphanylmethyl)benzene (1a) with magnesium in tetrahydrofuran yields [Mg{C₆H₃-2,6-(CH₂PPh₂)₂}₂] (2) after recrystallization from 1,2-dimethoxyethane. However, the similarly performed reduction of bromo- (1a) and iodo-2,6-bis(diphenylphosphanylmethyl)benzene (1b) with calcium leads to ether cleavage and subsequent degradation products. α-Deprotonation of THF yields 1,3-bis(diphenylphosphanylmethyl)benzene. Furthermore, the insoluble THF adducts of dimeric calcium diphenylphosphinate halides, [(thf)₃Ca(X)(µ-O₂PPh₂)]₂ [X = Br (3a), I (3b)], precipitate verifying ether decomposition and cleavage of P-C bonds. Ether adducts of calcium halides [such as [(dme)₂(thf)CaBr₂] (4)] form supporting the initial Grignard reaction and a subsequent Schlenk-type dismutation reaction.

Some peptide-based drugs including oxytocin, vasopressin, ziconotide, pramlintide, nesiritide, and octreotide, contain one intramolecular disulfide bonds. A novel and reusable monodispersed silica nanosphere-supported Pt(IV) complex (SiO2@TPEA@Pt(IV)) was synthesized via a four-step procedure and used for formation of intramolecular disulfide bonds in peptides. TEM and chemical mapping results for the Pt(II) intermediates and for SiO2@TPEA@Pt(IV) show that the silica nanospheres possess a monodisperse spherical structure and contain uniformly distributed Si, O, C, N, Cl, and Pt. The valence state of Pt on the silica nanospheres was characterized by XPS. The Pt(IV) loaded on SiO2@TPEA@Pt(IV) was 0.15 mmol/g, as determined by UV-vis spectrometry. Formation of intramolecular disulfides in six dithiol-containing peptides of variable lengths by use of SiO2@TPEA@Pt(IV) was investigated and the relative oxidation yields were determined by HPLC. In addition, peptide 1 (Ac-CPFC-NH2) was utilized to study the reusability of SiO2@TPEA@Pt(IV). No significant decrease in the relative oxidation yield was observed after ten reaction cycles. Moreover, the structure of SiO2@TPEA@Pt(IV) after being used ten cycles was determined to be similar to its initial one, demonstrating the cycling stability of the complex.

Polypharmacy and malnutrition are common health issues among older adults. In older people, there is a high prevalence of polypharmacy and malnutrition, and preliminary data also indicates that there is a significant of Food Supplements (FS) use, increasing the risk of duplication of thera-pies and several adverse reactions and drug-FS and FS-FS interactions. The intervention of health professionals in mitigating these risks is essential. This review not only underscores and discusses the potential association between polypharmacy, malnutrition, and food supplements but also presents current scientific evidence on polypharmacy, malnutrition, and the use of food supplements by the elderly. The work reviews the challenges, advantages and risks of using FS for the elderly who are polymedicated and/or malnourished, focusing on the good practices needed to support healthy ageing. In this regard, the paper intends to help health professionals better deal with the issue of polypharmacy and the use of multiple FS to overcome the malnutrition problem and improve the health and well-being of older adults.

Materials based on platinum metals with very good catalytic activity were tested in the reduction of p–nitrophenol (pNP) to p–aminophenol (pAP). The majority of presented catalytic materials are based on the adsorption of p–nitrophenol on the surface of the catalyst simultaneously with molecular hydrogen, coming from sodium borohydride in an aqueous medium, which reduces it. In the present paper, a catalytic material based on osmium dispersed in n–decanol or n–dodecanol is presented, which also works as an emulsion membrane, for the absorption of p–nitrophenol and molecular hydrogen at the n–alcohol aqueous solution interface. The hydrogenation of p–nitrophenol is carried out in a reaction and separation column in which the acid receiving phase emulsion is dispersed in the osmium nanodispersion, in n–alcohols. This emulsion circulates from the base of the column to its upper part in co-current or counter-current with the source phase consisting of p–nitrophenol and sodium borohydride. Experiments show that the circulation of counter-current phases is superior to that in co-current, and the emulsion based on n–decanol is more efficient than the one based on n–dodecanol. The increase in the pH difference between the source and receiving phases leads to the increase in the conversion of p–nitrophenol to p–aminophenol. The efficiency of separation of the reaction product in the receiving phase is lower than the conversion at the same operating time. The apparent catalytic rate constant (kapp) of the new catalytic material based on the emulsion membrane with nanodispersion of osmium nanoparticles (0.1×10−3 for n–dodecanol and 0.9×10−3 for n-decanol) is lower by an order of magnitude compared to those based on adsorption on catalysts from platinum metal group. The advantage of the tested membrane catalytic material is that it extracts p–aminophenol in the acid receiving phase. The paper proposes a mechanism of the studied reduction system.

Weight loss solutions are on the rise, and there is growing interest in natural alternatives to the pharmaceuticals in the market, which are not devoid of relevant side effects. To this end, the objective of the current study is to assess the effects of a botanical-based blend comprised of lemon verbena and hibiscus extracts in weight management, body fat, appetite, lipid, and glucose profiles, in an overweight population, for 90 days. As a result, the volunteers presented significant weight loss in absence of diet, which coincided with decreased body fat. Body fat was assessed by anthropometry, electrical bioimpedance and DEXA scan. Cholesterol levels were also significantly decreased. Satiety assessment revealed that the product contributed to increased feeling of fullness and satisfaction after a meal, compared to the placebo group, which could contribute to the weight loss observed. Blood glucose and blood pressure levels remained unchanged, which was expected as the volunteers were normoglycemic and their blood pressure was in the healthy range. In conclusion, daily supplementation of a botanical-based blend contributes to weight loss in overweight individuals, in absence of diet, while not affecting other parameters that are in the healthy range. This product could be a candidate alternative or add-on to other weight loss products, as part of a healthy lifestyle.

In addition to their importance in statistical thermodynamics, probabilistic entropy measurements are crucial for understanding and analyzing complex systems, with diverse applications in time series and one-dimensional profiles. However, extending these methods to two- and three-dimensional data still requires further development. In this study, we present a new method to classify spatiotemporal processes based on entropy measurements. To test and validate the method, we selected four classes of similar processes related to the evolution of random patterns: dynamic colored noises ((i)~white and (ii)~red); (iii)~weak turbulence from reaction-diffusion; (iv)~hydrodynamic fully developed turbulence, and (v)~plasma turbulence from MHD. Considering seven possible ways to measure entropy from a matrix, we present the method as a parameter space composed of the two best separating measures of the five selected classes. The results highlight better combined performance of Shannon Permutation Entropy ($S^p_H$) and a new approach based on Tsallis Spectral Permutation Entropy ($S^s_q$). Notably, our observations reveal the segregation of reaction terms in this $S^p_H \times S^s_q$ space, a result that identifies specific sectors for each class of dynamic process, and can be used to train machine learning models for automatic classification of complex spatiotemporal patterns.

Air pollution, climate change and global warming show direct linkage. Introduction - Background: Research in the field has proposed and demonstrated their link to increased allergenicity in plants, leading to increased allergic diseases. Allergen patterns are changing in response to climate change. Across Europe, up to 12% of the population suffers from allergic diseases (bronchial asthma and allergic rhinitis) caused by the pollen grains. The medical costs of these types of allergies are enormous and are increasing with the spread of common ragweed - Ambrosia artemisiifolia* in Europe. In practice, more and more patients are turning to allergists. Methods: Based on these data, the research aims to identify safety measures and specific legislation to control and eradicate common ragweed in the countries most affected by the spread of this plant in Europe, increase in population exposure in countries affected by the presence of common ragweed and the socio-economic impact of allergic rhinitis and bronchial asthma at European level.[1][2] Our database search did not reveal any other research that has addressed this topic to date. Results: This research identifies specific legislation to the countries most affected by the spread of this plant pollen grains at European level, changes in allergen patterns and monitoring/safety eradication measures decided by local authorities, and data on the spread of common ragweed over the last two decades, costs per treatment, increased allergic rhinitis and bronchial asthma morbidity in the most affected areas. Conclusions: At European level, there are no universally valid models for eradicating this weed. Various methods can be used to limit the spread of common ragweed and its pollen production (e.g. mowing once or twice a year of overgrown land, ploughing, chemical control, public information, etc.). Local and regional cooperation should be considered essential to promote phytosanitary & safety measures and exchange of information on methods to identify and manage the spread of common ragweed. Unified legislation at European level would help all affected countries; reduce morbidity from respiratory allergic diseases and the costs of treating these diseases.

In this age of mass media and, in particular, social media-driven perception of reality, coupling disease and prophylactic opinion dynamics models can provide better insights into disease evolution than using a disease model alone. We develop in this work two disease-opinion dynamics models based on the epidemiology of the new coronavirus disease (COVID-19) and the availability or not of imperfect vaccines. We assume that susceptibility to infection decreases with the level of prophylactic attitude (personal hygiene, social distancing), and changes in prophylactic attitudes of susceptible individuals occur in response to perceived disease prevalence and vaccination coverage and efficacy in the population. We derive and discuss the disease-free equilibriums and reproduction numbers in the introduced models. We further assess the impacts of the distribution of opinions at disease introduction, the ability to detect presymptomatic, asymptomatic and symptomatic positive COVID-19 cases, the behavioural responses to the outbreak and the introduction of vaccination, and the effects of distortions of disease prevalence by public policy and mass media on disease dynamics. The insights highlighted from the proposed models are expected to make informative contributions to public policy in a context of opinion fluxes in response to perceived disease prevalence.

This study aimed at testing the effectiveness of novel combinations of chemical and physical methods to control Prosopis juliflora, an invasive weed in the Moshi and Simanjiro districts of Nothern Tan-zania. Six different treatments including manual uprooting, glyphosate, bark chop with chemical application, two separate chemical mixtures and control were tested in a total of 32 plots, which represented two land use types (grazing land and farmland) found in the two districts. Each plot covered 20m×30m plot area. Two response variables (stem count and tree volume) were recorded to compare weed population density before and after treatment six months later. An analysis of the untreated control plots, showed that the inherent growth potential of P. juliflora was higher in Moshi than in Simanjiro district. The number of stems increased during the experiment for all six treatments showing that the P. juliflora population had not yet reached the local carrying capacity. For the manual control treatment, the increase was reduced compared to the untreated control. For all other treatments, the increase in stem count was on par with that in the untreated control or even higher. Thus, we conclude that only manual uprooting had a controlling effect but not to the extent that it eradicated P. juliflora. Thus, it is for P. juliflora as for weed control in general: weed control must be an ongoing effort.

This work presents a novel approach for the study of the movement of droplets on inclined surfaces under the influence of gravity and chemical heterogeneities. The developed numerical methodology uses data-driven modeling to extend the applicability limits of an analytically derived reduced-order model for the contact line velocity. More specifically, while the reduced-order model is able to capture the effects of the chemical heterogeneities to a satisfactory degree, it does not account for gravity. To alleviate this shortcoming, datasets generated from direct numerical simulations are used to train a data-driven model for the contact line velocity, which is based on the Fourier neural operator and corrects the reduced-order model predictions to match the reference solutions. This hybrid surrogate model, which comprises of both analytical and data-driven components, is then integrated in time to simulate the droplet movement, offering a speedup of five orders of magnitude compared to direct numerical simulations. The performance of this hybrid model is quantified and assessed in different wetting scenarios, by considering various inclination angles and values for the Bond number, demonstrating the accuracy of the predictions as long as the adopted parameters lie within the ranges considered in the training dataset.

Abstract: Due to sever land degradation throughout Ethiopia, the government has been implementing massive soil and water conservation works at the watershed scale since 2010 to conserve soil and water resources. However, most of the rivers in Ethiopia carry huge amount of sediment in rainy season and streams dried up in the dry period. Planned research was conducted on two paired micro-catchments Mt.Yewel with the main objective of evaluating the impact of soil and water conservation measures on base flow modification. Stream flow and rainfall data were collected from 22/11/2020 to 8/11/2022 on both micro-catchments at their outlets and center respectively. Base flow separation was done using Sp. Hydro base flow separation tool and SPSS Ver.21 statistical software was employed for data analysis. Flow duration curve (FDC) for both watersheds were developed. The FDC indicated that the base flow from treated micro-catchment ishigher and sustained in the dry season while it is low and un-sustained in untreated micro-catchment. From statistical analysis, there is a significant difference in base flow enhancement between the treated and untreated micro-catchment (P<0.001). Hence, catchment treatment contributed to improve groundwater recharge and sustain base flow in the dry season by reduce surface runoff during rainy season.

Copper(II), nickel(II) and zinc(II) complexes of various peptide fragments of tau protein were studied by potentiometric and spectroscopic techniques. All peptides contained one histidyl residue and represented the sequences of tau(91-97) (Ac-AQPHTEI-NH2), tau(385-390) (Ac-KTDHGA-NH2) and tau(404-409) (Ac-SPRHLS-NH2). Imidazole-N donors of histidine were the primary metal binding sites for all peptides and all metal ions but in case of copper(II) and nickel(II) the deprotonated amide groups were also involved in metal binding by increasing pH. The most stable complexes were formed with copper(II) ion but the presence of prolyl residues resulted in significant changes in the thermodynamic stability and speciation of the systems. It was also demonstrated that nickel(II) and especially zinc(II) complexes have relative low thermodynamic stability with these peptides. Copper(II) catalyzed oxidation of the peptides was also studied. In the presence of H2O2 the fragmentation of peptides can be detected in all cases. In the simultaneous presence of of H2O2 and ascorbic acid the extent of the fragmentation of the peptide is less preferred, and the formation of 2-oxo-histidine also occurs.

Abstract: Severe land degradation is the principal environmental problem in Ethiopian highlands in the form of soil erosion, and soil fertility loss, which is caused by human intervention for food, shelter, and energy demands. Soil erosion contributes to the loss of precious soil and water resources which are the basis of agricultural production and provide numerous other eco-system services. The Ethiopian highlands are one of the most degraded regions in the world. To combat such problems, the government of Ethiopia has been implementing massive soil and water conservation works at the watershed scale since 2010 to conserve soil and water resources. Mount Yewel is one of the highlands in Northeastern Ethiopia where intensive soil and water conserva-tion has been implemented. Despite the massive investment in soil and water conservation measures, most of the rivers in the highlands of Ethiopia carry huge amounts of sediment with high flood risks in the wet season and streams are dried up in the dry period. Nonetheless, the impact of soil and water conservation measures on flood reduction and dry season flow en-hancement has not yet been quantified and evaluated. This research was then conducted on paired micro-catchments of Mount Yewel with the main objective of evaluating the impact of soil and water conservation measures on base flow modification. Stream flow and rainfall data were col-lected from 22/11/2020 to 8/11/2022 on paired micro-catchments of Mount Yewel at their outlets and centers respectively. Base flow separation was done from the stream hydrograph using Sp. Hydro base flow separation tool and SPSS Ver.21 statistical software were employed for data analysis. Flow duration curves (FDC) for both watersheds were developed to compare the stream flow patterns between treated and untreated micro-catchments of Mount Yewel. The FDC indi-cated that the base flow from treated micro-catchment is higher and sustained in the dry season while it is low and unsustained in untreated micro-catchment. From statistical analysis, there is a significant (P

Companies are increasingly focusing on sustainable business practices. Internal and external stakeholders’ expectations manifest in legal requirements, national and international standards, and market and customer expectations, among other things, must be considered. In addition to profit maximization as the usual target for corporate management, management must consider environmental sustainability aspects such as resource efficiency, greenhouse gas intensity, and a company's emissions behavior. In addition, social aspects relating to the company's employees, the immediate urban environment, the situation in the supply chain, and effects on the market environment must increasingly be considered. Specifically, companies are faced with the chal-lenge of dealing with conflicting objectives regarding the various aspects of sustainability and, if necessary, weighing them up against each other. These trade-offs must be made against the company's socio-economic and ecological environment, corporate strategy, and sustainability goals. This paper provides an overview of current approaches and research gaps on this topic through a literature review. It shows a lack of methods and frameworks to specifically deal with trade-offs and conflicts of goals.

Aim: To evaluate the panmacular subthreshold micropulse laser treatment results among patients with central serous chorioretinopathy (CSC) and their correlation with functional and morphological parameters. Material and methods: The examined group included 10 non-treated and 41 treated patients with acute, recurrent, and chronic CSC (13 F, 38 M, mean age 44.11±6.5) and 14 healthy controls (6 F, 8 M, mean age 45±9.3). The BCVA examination, ophthalmoscopy, microp-erimetry, angio-OCT and OCT were performed. The medical history regarding chronic general disorders and known risk factors were recorded. Results: Complete resorption of SRF was obtained in 100% aCSC, 86.66% cCSC, and 63.63% r CSC. BCVA and RetSens significantly improved most of the patients treated in aCSC. The lowest BCVA and RetSens, but the largest pachyvessel and disease duration, were found in rCSC. A strong negative correlation between final BCVA and disease duration was found. No patient demonstrated laser lesions following treatment. Conclusions: The panmacular MPLT therapy leads to long-term enhancement of functional and morphological parameters in all CSC patients. The acute CSC patients showed the most significant improvement. The procedure is safe and could be considered a preferred treatment option for all active CSC cases. Timely treatment is crucial for beneficial outcomes.

This study outlines the development of an innovative method utilizing UHPLC-PDA for the simultaneous identification of polyphenols and bitter acids (alpha-acids, beta-acids, and iso-alpha-acids) in beer samples. The resulting chemical profiles were leveraged to distinguish the characteristics of four bergamot-flavored beers, each representing distinct styles (IPA, Lager, Blanche, and ALE), produced on a pilot-scale plant. In a streamlined 29-minute analysis, twenty-nine polyphenols and fourteen bitter acids were successfully identified under optimized separation conditions. Rigorous validation, encompassing parameters such as Limit of Detection (LOD), Limit of Quantification (LOQ), R-squared (R2), repeatability, and reproducibility, was conducted for polyphenol quantification using constructed calibration curves with seven levels. Exploring polyphenolic components as potential discriminators among different beer styles, a total of thirty-two polyphenolic compounds were identified and quantified, including characteristic bergamot peel polyphenols like neoeriocitrin, naringin, and neohesperidin. The determination of bitter units and total phenols further aided in style differentiation. Multivariate analysis provided additional insights into variations among specific beer styles, revealing discrepancies in the presence or relative concentrations of specific compounds linked to brewing ingredients and processes. This research enhances to trace the fingerprinting of the chemistry governing beer quality through a straightforward and cost-effective analytical approach, readily applicable in common laboratories.

Rebar cages form the skeletal framework of reinforced concrete structural members. They comprise longitudinal and transverse reinforcing bars, usually connected by tie wires. Past studies have identified tie-wire connections as the "weak links" in large, prefabricated rebar cages, leading to their failure during site handling and construction stages. Recent research has explored the use of mechanical U-bolt connectors to bolster stability and safety of rebar cages while reducing their vulnerability and risk of failure. This paper presents a comprehensive experimental and numerical investigation of a new type of mechanical connector, referred to as "Cage Clamp", to enhance rebar cage stability and safety. Component-level experimental tests are conducted to determine the force-displacement response of Cage Clamp connectors for crossbar connections in different degrees of freedom. The results highlight the remarkable strength and stiffness of Cage Clamp connectors, significantly outperforming traditional tie-wire connections. Furthermore, full-scale experimental tests are performed on a circular underground pile-shaft rebar cage with Cage Clamp connectors to assess its behavior under various site handling conditions. The data obtained from these experiments are used to construct and refine detailed 3D finite element models of the rebar cages, capable of capturing the complex behavior of rebar cages with Cage Clamp connectors. Using the numerical model, a sensitivity analysis is performed to assess the effect of the number of Cage Clamps on the deflection and stability of the rebar cage. The findings show that using cage clamps to connect pick-up rebar with lateral reinforcement at every 8 to 10 feet is sufficient to ensure the stability of the cage during typical site handling conditions. The results of this study serve as a basis for establishing analysis, design, fabrication, and handling guidelines for rebar cages, contributing to safe and efficient construction practices.

In this paper, we investigate the Green measure for a class of non-Gaussian processes in $\mathbb{R}^{d}$. These measures are associated with the family of generalized grey Brownian motions $B_{\beta,\alpha}$, $0

The fitting and modeling of skewed, complex, symmetric, and asymmetric datasets is an exciting research topic in many fields of applied sciences, notably lifetime, medical, and financial sciences. The Heavy tailed Nadarajah Haghighi model is introduced by compounding the heavy tailed family and Nadarajah Haghighi distribution in this paper. The so obtained model has three parameters accounting for the scale and shape of the distribution. The proposed distribution's fundamental characteristics such as probability density, cumulative distribution, hazard rate, and survival functions are provided, and several key statistical properties are established, and several entropy information measures are proposed. The estimation of model parameter is performed via the ML procedure. Further, different simulation experiments are conducted to demonstrate the performance of proposed estimator’s using some measure, like the average estimate, the average bias, and associated mean square error. Finally, we are applied our proposed model to analyze three different real datasets. In our illustration, we are compared the practicality of the recommended model with several well-known competing models.

Residual stress (RS) is the most challenging problem in metal additive manufacturing (AM) since the build-up of high tensile RS may influence the fatigue life, corrosion resistance, crack initiation, and failure of the additively manufactured components. While tensile RS is inherent in all the AM processes, fast and accurate prediction of stress state within the part is extremely valuable and would result in optimization of the process parameters in achieving a desired RS and control of the build process. This paper proposes a physics-based analytical model to rapidly and accurately predict the RS within the additively manufactured part. In this model, a transient moving point heat source (HS) is utilized to determine the temperature field. Due to the high temperature gradient within the proximity of the melt pool area, material experience high thermal stress. Thermal stress is calculated by combining three sources of stresses known as stresses due to the body forces, normal tension, and hydrostatic stress in a homogeneous semi-infinite medium. The thermal stress determines the RS state within the part. Consequently, by taking the thermal stress history as an input, both the in-plane and out of plane RS distributions are found from incremental plasticity and kinematic hardening behavior of the metal by considering volume conservation in plastic deformation in coupling with the equilibrium and compatibility conditions. In this modeling, material properties are temperature-sensitive since the steep temperature gradient varies the properties significantly. Moreover, the energy needed for the solid-state phase transition is reflected by modifying the specific heat employing the latent heat of fusion. Furthermore, the multi-layer and multi-scan aspects of metal AM are considered by including the temperature history from previous layers and scans. Results from the analytical RS model presented excellent agreement with XRD measurements employed to determine the RS in the Ti-6Al-4V specimens.

The presence of antibiotic residues in honey has recently become a growing public health concern due to the overuse of these products in beekeeping and their transfer to the food industry. The aim of this study was to develop and validate a simple, selective and sensitive method for the simultaneous identification and quantification of residues of twenty-two sulfonamides, trimethoprim and dapsone in honey using a rapid and reliable liquid chromatography–tandem mass spectrometry (LC–MS/MS) method. The developed method showed good linearity, specificity, precision (repeatability and intra-laboratory reproducibility) and recovery. The decision limit (CCalpha) ranged between 2.16-22.12 µg/kg for CCα, while the detection capability (CCbeta) was between 2.16- 2.67-27.36 µg/kg. The method proved to be rapid, reliable and effective for the determination of sulfonamides, trimethoprim and dapsone from honey samples. The average recoveries were estimated to be between 70 and 106%. The relative standard deviations (RSDs) were between 6-18%. In practice, the method is essential to check the honey sold on the market and ensure its safety before it reaches the consumer.

A semi–numerical approach proposed many years ago for describing gravitational collapse in the post–quasi–static approximation , , , , is modified in order to avoid the numerical integration of the basic differential equations the approach is based upon. For doing that we have to impose some restrictions on the fluid distribution. More specifically, we shall assume the vanishing complexity factor condition, which allows for analytical integration of the pertinent differential equations and leads to physically interesting models. Instead, we show that neither the homologous nor the quasi–homologous evolution are acceptable since they lead to geodesic fluids, which are unsuitable for being described in the post–quasi–static approximation. Also, we prove that, within this approximation, adiabatic evolution also leads to geodesic fluids and therefore we shall consider exclusively dissipative systems. Besides the vanishing complexity factor condition, additional information is required for a full description of models. We shall propose different strategies for obtaining such an information, which are based on observables quantities (e.g. luminosity and redshift), and/or heuristic mathematical ansatz. To illustrate the method, we present two models. One model is inspired in the well known Schwarzschild interior solution, and another one is inspired in Tolman VI solution.

This work is a generalization of the Lopez-Ruiz, Mancini and Calbet (LMC); and Shiner, Davison and Landsberg (SDL) complexity measures, considering that the state of a system or process is represented by a dynamical variable during a certain time interval. As the two complexity measures are based on the calculation of informational entropy, an equivalent information source is defined and, as time passes, the individual information associated to the measured parameter is the seed to calculate instantaneous LMC and SDL measures. To show how the methodology works, an example with economic data is presented.

We examined a series of real-world, pictorial photographs with varying characteristics, along with their modification by noise addition and unsharp masking. As response metrics we used three different versions of the aesthetic measure originally proposed by Birkhoff. The first aesthetic measure, which has been used in other studies, and which we used in our previous work as well, showed a preference for the least complex of the images. It provided no justification for noise addition, but did reveal enhancement on unsharp masking. Optimum level of unsharp masking varied with the image, but was predictable from the individual image’s GIF compressibility. We expect this result to be useful for guiding the processing of pictorial photographic imagery. The second aesthetic measure, that of informational aesthetics based on entropy alone failed to provide useful discrimination among the images or the conditions of their modification. A third measure, derived from the concepts of entropy maximization, as well as the hypothesized preference of observers for “simpler”, i.e., more compressible, images, yielded qualitatively the same results as the more traditional version of the measure. Differences among the photographs and the conditions of their modification were more clearly defined with this metric, however.

Quantum information theory and quantum computing are theoritical basis of quantum computers. Thanks to entanglement, quantum mechanical systems are provisioned to realize many information processing problems faster than classical counterparts. For example, Shor’s factorization algorithm, Grover’s search algorithm, quantum Fourrier transformation, etc. Entanglement, is the theoretical basis providing the expected speedups. It can be view in bipartite or multipartite forms. In order to quantify entanglement, some measures are defined. On the other hand, a general and accepted criterion, which can measure the amount of entanglement of multilateral systems, has not yet been found. In this work, we make a short review of recent research on the topic entanglement monotones and measures with an analitical approach.

Abstract: Toxicity of emerging organic pollutants to photosystems of aquatic plants are still not well clarified. This study aimed to develop a novel ecotoxicological experimental protocol based on nanoscale electrochemical mapping of photosynthetic oxygen evolution of aquatic plants by SECM (scanning electrochemical microscopy). The protocol was also checked by confocal laser scanning microscopy (CLSM), the traditional Clark oxygen electrode method and chlorophyll fluorescence technique. The typical persistent organic pollutant 2,4-dichlorophenol (2,4-DCP) in water environment and the common aquatic Microsorium pteropus (M. pteropus) were chosen as the model organic pollutant and tested plant, respectively. It was found that the SECM method could well discriminated the responses of stoma micromorphology and spatial pattens of photosynthetic oxygen evolution on single stoma. The shape of stoma blurred with increasing 2,4-DCP concentration, which was in good agreement with the CLSM images. The dose-response curves and IC50 values obtained from the SECM data were verified by the data measured by the traditional Clark oxygen electrode method and chlorophyll fluorescence test. The IC50 value of single stoma oxygen emission of 24 h exposed plant leave, which was derived from the SECM current data (32535 μg L-1), was close to those calculated from the maximum photosynthetic efficiency (Fv/Fm) measured by chlorophyll fluorescence test (33963 μg L-1), and the Clark oxygen electrode method photosynthetic oxygen evolution rate (32375 μg L-1). The 72 h and 96 h 2,4-DCP exposure data further confirmed the reliability of the nanoscale stoma oxygen emission mapping methodology for ecotoxicological assessment. In this protocol, the procedures for how to collect effective electrochemical data and how to extract useful information from the single stoma oxygen emission pattern were well established. This study showed that SECM is a feasible and reliable ecotoxicological tool for evaluation of toxicity of organic pollutants to higher plants with unique nanoscale visualization advantage over the conventional methods.

The aim of this study is to solve the problems of complicated pretreatment and high analytical cost in the detection technology of trace drug toxicants in municipal wastewater. A high-performance magnetic sorbent was synthesized for enrichment of trace drug substances in wastewater to develop magnetic solid-phase extraction pretreatment combined with the acoustic ejection mass spectrometry (AEMS) analytical methods for the molecules in wastewater drug toxicants. The magnetic nanospheres was successfully prepared by magnetic nanoparticles modified with divinylbenzene and vinyl pyrrolidone.The results showed that the linear dynamic range of 17 drugs was 1-500 ng/L, the recovery was 43%-105%, the matrix effect was more than 67%, the limit of quantitative detection was 1-2 ng/L, and the detection time of each sample was 2.98s. It can be seen that the developed magnetic solid-phase extraction (MSPE) method is a good solution to the problem of complicated pre-treatment and analytical cost in the detection of drugs in wastewater. The developed magnetic material and acoustic excitation coupled mass spectrometry analysis method can realize the low-cost, efficient enrichment and fast analysis of different kinds of drug molecules in urban sewage.

Quality of life (QoL) assessments are integral to cancer care, yet their effectiveness in providing essential information for supporting survivors varies. This study aimed to elucidate key indicators of QoL among colorectal cancer survivors from the perspective of healthcare professionals, and to evaluate existing QoL questionnaires in relation to these indicators. Two studies were conducted: a Delphi study to identify key QoL indicators and a scoping review of questionnaires suitable for colorectal cancer survivors. Fifty-four healthcare professionals participated in the Delphi study's first round, with 25 in the second. The study identified two primary QoL domains (Physical and Psychological) and 17 subdomains deemed most critical. Additionally, a review of 12 questionnaires revealed two instruments assessing the most important general domains. Findings underscored a misalignment between existing assessment tools and healthcare professionals' clinical priorities in working with colorectal cancer survivors. To enhance support for survivors' QoL, efforts are needed to develop instruments that better align with the demands of routine QoL assessment in clinical practice.

The application of smartphone-based color evaluation of passive sampling devices for gases has only been sparsely reported. The present review aims to compile available publications with respect to the configuration of the passive samplers, conditions of smartphone photographing, analytical procedure for color detection and quantification (including calibration processes), and their application to different target gases. The performance of the methods - whenever available - is presented regarding the analytical specifications selectivity, sensitivity, and limit of detection in comparison with other color evaluation methods of passive samplers. Practical aspects like requirements of instrumentation and ease of use will be outlined in view of the potential employment in education and citizen science projects. In one section of the review the inconsistent terminology of passive and diffusive sampling is discussed in order to clarify the distinction of information obtained from the uptake of the passive samplers between gas-phase concentration and the accumulated deposition flux of gaseous analytes. Colorimetric gas sensors are included in the review when applied in passive sampling configurations and evaluation is performed with smartphone-based color evaluation. Differences in the analytical procedures employed after the passive sampling step and prior to the detection of the colored compounds are also presented.

In this paper, closed and semi-closed form solutions are presented for the self - and mutual inductance of ordinary and Better disk coils which lie concentrically in a plane. The solutions are given as the combination of the elliptic integral of the first kind and a simple integral or only as the second elliptic integral of the second kind. All formulas or obtained in remarkably simple form and give extremely accurate results with significantly neglectable computational time. All cases either regular or singular (disks in contact or overlap) are covered. The formulas for the mutual inductances can be directly used to calculating the self-inductance of the ordinary disk coil or the Bitter disk coil, respectively. Many presented examples show the excellent numerical agreement with previous publish methods.

The release of the active substance from the matrix modified-release tablets based on Kollidon®SR and chitosan depends on its solubility in the dissolution medium and on the composition of the matrix-forming polymers. The study is based on new oral matrix tablets based on Kollidon®SR and chitosan, formulated to optimize the low oral bioavailability of chlorzoxazone, a non-steroidal anti-inflammatory drug, a class II Biopharmaceutical Classification System. Nine types of chlorzoxazone matrix tablets were obtained using the direct compression method, and their combination at 1:1, 1:2, 1:3 chlorzoxazone/ excipients, 20%-40% (w/w) Kollidon®SR, 3-7% (w/w) chitosan and the auxiliary substances were formulated in constant concentrations. Pharmaco-technical characterization included the analysis of flowability and compressibility properties (flow time, friction coefficient, angle of repose, Hausner ratio, Carr Index), and of pharmaco-chemical characteristics (mass and dose uniformity, thickness, diameter, mechanical strength, Friability, degree of softening, in vitro release profile) of the tablets. Based on the initial evaluation of the pharmaco-technical analysis, pharmaco-chemical characteristics, and in vitro release profile, only three matrix tablet formulations (F1b, F2b, and F3b) were further tested. They were evaluated through Fourier-transform infrared spectrometry, X-ray Diffraction, thermogravimetry, differential scanning calorimetry, and in vitro dissolution tests. The three formulations were comparatively studied regarding the release kinetics of active substances using in vitro release testing. The results were analyzed by fitting into four representative mathematical models for the modified release oral formulations. In vitro kinetic study reveals a complex mechanism of release occurring in the first (0 - 2 hours) and second (2.0 hours – 36 hours) steps of drug release. Two factors have been calculated to assess the release profile of chlorzoxazone: f1 - the similarity factor and f2 - the factor difference. The results have shown that both Kollidon®SR and chitosan may be used as matrix-forming agents when combined with chlorzoxazone. In vitro dissolution tests revealed the F2b sample, data suggesting a faster drug release. The three formulations showed optimum pharmaco-technical properties and in vitro kinetic study, and they had tremendous potential to be used in oral pharmaceutical products for the controlled delivery of chlorzoxazone.

Lung cancer is the leading cause of cancer related mortality worldwide. In order to improve its overall survival, early diagnosis is required. Since current screening methods still face some pitfalls, such as high false positive rates for low-dose computed tomography, researchers are still looking for early biomarkers to complement existing screening techniques in order to provide a safe, faster and more accurate diagnosis. Biomarkers are biological molecules found in body fluids, such as plasma, that can be used to diagnose a condition or disease. Metabolomics has already shown to be a powerful tool in the search for cancer biomarkers since cancer cells are characterised by impaired metabolism, resulting in an adapted plasma metabolite profile. The metabolite profile can be determined using nuclear magnetic resonance, or NMR. Although metabolomics and NMR metabolite profiling of blood plasma are still under investigation, there is already evidence for its potential for early-stage lung cancer diagnosis, therapy response, and follow-up monitoring. This review highlights some key breakthroughs in this research field, where the most significant biomarkers will be discussed in relation with their metabolic pathways and in light of the altered cancer metabolism.

Objective: The study aimed to characterize the changing landscape of circulating SARS-CoV-2 lineages in the local community of Hong Kong throughout 2022. We examined how adjustments to quarantine arrangements influenced the transmission pattern of Omicron variants in a city with relatively rigorous social distancing measures at that time. Methods: In 2022, a total of 4,684 local SARS-CoV-2 genomes were sequenced using the Oxford Nanopore GridION sequencer. SARS-CoV-2 consensus genomes were generated by MAFFT, and the maximum likelihood phylogeny of these genomes were determined using IQ-TREE. The dynamic changes in lineages were depicted in a time tree created by Nextstrain. Statistical analysis was conducted to assess the correlation between changes in the number of lineages and adjustments to quarantine arrangements. Results: By the end of 2022, a total of 83 SARS-CoV-2 lineages were identified in the community. The increase in the number of new lineages was significantly associated with the relaxation of quarantine arrangements (One-way ANOVA, F(5,47)=18.233, p&lt;0.001)). Over time, Omicron BA.5 sub-lineages replaced BA.2.2 and became the predominant Omicron variants in Hong Kong. The influx of new lineages reshaped the dynamics of Omicron variants in the community without fluctuating the death rate and hospitalization rate (One-way ANOVA, F(5,47)=2.037, p=0.091). Conclusion: The study revealed that even with an extended mandatory quarantine period for incoming travelers, it may not be feasible to completely prevent the introduction and subsequent community spread of highly contagious Omicron variants. Ongoing molecular surveillance of COVID-19 remains essential to monitor the emergence of new recombinant variants.

In this study, a carbon fiber microelectrode (CF) was applied for the investigation of electrochemical behavior and determination of natural antioxidant, apocynin (APO). Given the limited solubility of APO in water, a mixture of anhydrous acetic acid (AcH) with 20%, v/v acetonitrile (AN) and 0.1 mol L-1 sodium acetate (AcNa) was used. The electrochemical properties of APO were examined through linear sweep voltammetry (LSV), differential pulse voltammetry (DPV), and cyclic voltammetry (CV). The anodic oxidation of APO, which is the basis of the method used, proved to be diffusion-controlled and proceeded with a two-electron and one proton exchange. Both radicals and radical cations, arising from the first and second step of electrode reactions, respectively, underwent subsequent chemical transformations to yield more stable final products (EqCiEiCi mechanism). Using optimized DPV conditions, the anodic peak current of APO at potential of 0.925 V vs Ag/AgCl showed a good linear response within the concentration range of 2.7×10-6 – 2.6×10-4 mol L-1. The detection and quantification limits were determined as 8.9×10-7 and 2.7×10-6 mol L-1, respectively. The developed DPV method enabled the successful determination of APO in herbal extracts and in dietary supplements. It should be noted that this is the first method of voltammetric determination of APO.

Introduction: Epilepsy is one of the most common neurological diseases. Epilepsy poses a significant burden on the quality of life of affected individuals and their families. The aim of this study was to determine the psychiatric disorders in epileptic patients. Methods and Materials: This descriptive-analytical study was conducted in 2017 with a simple random sampling method on patients with epilepsy who admitted to the neurology department. Results: Among the 150 examined patients, 88 (58.7%) were female and 63(42%) had epilepsy more than 10 years. The most common psychiatric disorder among epileptic patients was depression (68 patients = 45.3%) and anxiety (65 patients = 43.3%) patients. Conclusion: Most of patients had more than 10 years history of epilepsy. Also, Anxiety and depression were the most common symptoms in epileptic patients. It need to more study to determine the psychiatric disorders in epileptic patients.

This study introduces and demonstrates a comprehensive, accurate, unbiased approach to robust quantitative comparison of Electronic Nicotine Delivery Systems (ENDS) appropriate for establishing substantial equivalence (or lack thereof) between tobacco products. The approach is demonstrated across a family of thirteen pen- and pod-style ENDS products. Methods employed consist of formulating a robust emissions surface regression model, quantifying the empirical accuracy of the model as applied to each product, evaluating relationships between product design characteristics and maximum emissions characteristics, and presenting results in formats useful to researchers, regulators, and consumers. Results provide a response surface to characterize emissions (total particulate matter and constituents thereof) from each ENDS appropriate for use in a computer model and for conducting quantitative exposure comparisons between products. Results demonstrate that emissions vary as a function of puff duration, flow rate, E-Liquid composition, and device operating power. Further, results indicate that regulating design characteristics of ENDS devices and consumables may not achieve desired public health outcomes; it is more effective to regulate maximum permissible emissions directly. Three emissions outcome measures (yield per puff, mass concentration and constituent mass ratio) are recommended for adoption as standard quantities for reporting by manufacturers and research laboratories. The approach provides a means of (a) quantifying and comparing maximal emissions from ENDS products spanning their entire operating envelope, (b) comparative evaluation of ENDS devices and consumable design characteristics, and (c) establishing comparative equivalence of maximal emissions from ENDS. A consumer-oriented product emissions dashboard is proposed for comparative evaluation of ENDS exposure potential. Maximum achievable power dissipated in the coil of ENDS is identified as a potentially effective regulatory parameter.

Integrated information theory (IIT) proposes a measure of integrated information (Φ) to capture the level of consciousness for a physical system in a given state. Unfortunately, calculating Φ itself is currently only possible for very small model systems, and far from computable for the kinds of systems typically associated with consciousness (brains). Here, we consider several proposed measures and computational approximations, some of which can be applied to larger systems, and test if they correlate well with Φ. While these measures and approximations capture intuitions underlying IIT and some have had success in practical applications, it has not been shown that they actually quantify the type of integrated information specified by the latest version of IIT. In this study, we evaluated these approximations and heuristic measures, based not on practical or clinical considerations, but rather based on how well they estimate the Φ values of model systems. To do this, we simulated networks consisting of 3–6 binary linear threshold nodes randomly connected with excitatory and inhibitory connections. For each system, we then constructed the system’s state transition probability matrix (TPM), as well as its state transition matrix (STM) over time for all possible initial states. From these matrices, we calculated, approximations to Φ, and measures based on state differentiation, state entropy, state uniqueness, and integrated information. All measures were correlated with Φ in a state dependent and state independent manner. Our findings suggest that Φ can be approximated closely in small binary systems by using one or more of the readily available approximations (r > 0.95), but without major reductions in computational demands. Furthermore, Φ correlated strongly with measures of signal complexity (LZ, r_s = 0.722), decoder based integrated information (Φ*, r_s = 0.816), and state differentiation (D1, r_s = 0.827), on the system level (state independent). These measures could allow for efficient estimation of Φ on a group level, or as accurate predictors of low, but not high, Φ systems. While it’s uncertain whether the results extend to larger systems or systems with other dynamics, we stress the importance that measures aimed at being practical alternatives to Φ are at a minimum rigorously tested in an environment where the ground truth can be established.

Bonchev and Trinajstic defined two distance based entropy measures to measure the molecular branching of molecular graphs in 1977 [Information theory, distance matrix, and molecular branching, J. Chem. Phys., 38 (1977), 4517–4533]. In this paper we use these entropy measures which are based on distance matrices of graphs. The first one is based on distribution of distances in distance matrix and the second one is based on distribution of distances in upper triangular submatrix. We obtain the two entropy measures of paths, stars, complete graphs, cycles and complete bipartite graphs. Finally we obtain the minimal trees with respect to these entropy measures with fixed diameter.

Inadequately managed agricultural waste significantly impacts the environment, health, and economy. This form of pollution arises from the underutilization, poor awareness, and insufficient treatment of agricultural waste. Fruit and vegetable wastes are valuable sources of bioactive compounds. This study aims to revalorize discarded waste from red habanero chili peppers (Capsicum chinense) by extracting bioactive compounds through different extraction processes: maceration (ME), maceration assisted by ultrasound (US), Soxhlet extraction (SE), supercritical fluid extraction (SFE), and supercritical fluid extraction with a co-solvent (SFEC). Extraction processes have significant effects on extraction efficiency and phytochemical profile (capsaicinoids and carotenoids recovery). The results indicate that the highest efficiency process is obtained with SFEC, also a high phytochemicals recovery (14.9 mg of total capsaicinoids and total carotenoids 292.09 µg per gram of sample). Concerning to phytochemical profile in the extract, the maceration process gets the highest concentration of compound followed by US and SFEC. These data reveal that the use of SFE and SFEC extraction is recommended for extraction of phytochemicals with biologically activity from red habanero chili pepper waste for diverse industries application.

While the COVID-19 outbreak was reported to first originate from Wuhan, China, it has been declared as a Public Health Emergency of International Concern (PHEIC) on 30 January 2020 by WHO, and it has spread to over 180 countries by the time of this paper was being composed. As the disease spreads around the globe, it has evolved into a worldwide pandemic, endangering the state of global public health and becoming a serious threat to the global community. To combat and prevent the spread of the disease, all individuals should be well-informed of the rapidly changing state of COVID-19. In the endeavor of accomplishing this objective, a COVID-19 real-time analytical tracker has been built to provide the latest status of the disease and relevant analytical insights. The real-time tracker is designed to cater to the general audience without advanced statistical aptitude. It aims to communicate insights through various straightforward and concise data visualizations that are supported by sound statistical foundations and reliable data sources. This paper aims to discuss the major methodologies which are utilized to generate the insights displayed on the real-time tracker, which include real-time data retrieval, normalization techniques, ARIMA time-series forecasting, and logistic regression models. In addition to introducing the details and motivations of the utilized methodologies, the paper additionally features some key discoveries that have been derived in regard to COVID-19 using the methodologies.

This paper deals with the analytical modeling and control of rectilinear snake robots. During recent times snake robots have created much interest among researchers. The rectilinear pattern gait is one of the four biological snake locomotion modes. Rectilinear snakes have been widely used in rescue operations especially in rough terrains especially in narrow spaces where human intervention is not easy. Computational analysis of rectilinear motion is done using MATLAB.

Throughout this paper the effects of injuries on athletes are highlighted in different aspects. Exertional compartment syndrome is a specific injury related to athletes that is thoroughly explored in this paper through an analysis of the anatomy, symptoms, diagnosis and treatments of the syndrome. Exertional compartment syndrome is an exercise-induced muscle and nerve condition that causes pain, swelling as well as disability in the affected muscles of the lower leg. This syndrome commonly develops in young athletes involved in sports with excessive running and repetitive impact such as track and field, soccer, basketball and lacrosse. Exertional compartment syndrome is commonly misdiagnosed as other less severe injuries such as shin splints, which is symptomatic of pain along the tibia bone of the lower leg caused by overuse. The misdiagnosis of exertional compartment syndrome allows the syndrome to worsen and intensify resulting in the only effective treatment to be fasciotomy, a surgical procedure to release the pressure within the compartment of the lower leg. There is no definitive protocol developed for patients after fasciotomy is performed. Athletes experiencing similar symptoms after surgery are usually treated for their symptoms rather than the syndrome as a whole, which does not have a high degree of success. The development of a definitive protocol utilizing the techniques of manual therapy, mobility stretching and corrective strength training can improve the adverse effects of exertional compartment syndrome as well as restore functionality to the athlete. Raising awareness of this syndrome in athletics will be effective in treating the athlete early on in order to avoid severe effects and invasive procedures.

I want to find an extension of the Hausdorff Measure and Fractal Measure which allows me to compute a unique, satisfying average for functions defined on non-fractal, measurable sets in the sense of Carathedory which has no gauge function.

There is increasing interest in automating train operations of mainline services, e.g. to increase network capacity. Automatic train operation (ATO) is already achieved by several pilot projects, but not implemented on a large scale. Before the general introduction of new or adapted technologies can have a transformative effect on the operation of such a complex system as train operation on mainlines, they have to pass functional, interoperability and performance tests. A virtual preliminary analysis is one way to ensure a smooth as well as safe introduction and implementation. This paper aims to present an approach that applies to the performance testing of ATO systems. Therefore, methods and test standards for technologies enabling automatic operation in other transport sectors are reviewed. The main findings have been adapted, transformed and combined to be used as a general strategy for virtual performance testing in the railway sector. Specifically, universal performance indicators, namely punctuality, accuracy, energy consumption, safety and comfort, are presented. A layer model for scenario description is adapted from the automotive sector, as well as the definition of different scenario types. Lastly, factors that can influence the performance of an ATO algorithm are identified. To demonstrate the developed approach, a straightforward investigation of a case study is conducted using a microscopic train simulator in combination with an ATO algorithm.

Natural time is a new time domain introduced in 2001. The analysis of time series associated with a complex system in natural time may provide useful information and may reveal properties that are usually hidden when studying the system in conventional time. In this new time domain, an entropy has been defined and complexity measures based on this entropy as well as its value under time-reversal have been introduced and found applications in various complex systems. Here, we review these applications in the electric signals that precede rupture, e.g., earthquakes, in the analysis of electrocardiograms, as well as in global atmospheric phenomena like the El Nino/La Nina Southern Oscillation.

This paper revisits the analytical theory of fractional vibrations with the highlights in five aspects. First, we address the cases of structures with frequency dependent mass or damping or stiffness in Sections 2-4. Second, we introduce the theory based on the general second-order vibration motion equation with frequency dependent elements (mass, damping, stiffness) in Sections 5-7. Third, we present the analytical theory of seven specific classes of second-order vibration systems with frequency dependent mass or damping or stiffness in Sections 8 and 9. Fourth, we bring forward the analytical theory of seven classes of fractional vibration systems in Sections 10-12. Finally, as an application, we give the closed form expression of the forced response to multi-fractional Euler-Bernoulli beam in Section 13. The explanation of the nonlinearity of fractional vibrations is given in Section 14.

We analyze the transformation of a very broad class of metrics that can be put in terms of static coordinates. Starting from a general ansatz, we obtain a relation for the parameters in which one can impose further symmetries, or restrictions. One of the simplest restrictions leads to FLRW cases, while transforming from the initial static to other static-type coordinates can lead to near horizon coordinates, Wheeler-Regge, isotropic coordinates, among others. As less restrictive cases, we show an indirect route for obtaining Kruskal-Szekeres within this approach, as well as Lema\^{\i}tre coordinates. We use Schwarzschild spacetime as prototype for testing the procedure in individual cases. However, application to other spacetimes, such as de-Sitter, Reissner-Nordstr\"{o}m or Schwarzschild de Sitter, can be readily generalized.

Sheep’s milk is a significant source of nucleotides monophosphate (NMPs) but can also contain undesirable residues from veterinary drugs, posing a potential human health risk. This study introduces a novel application of 2D-LC, in heart-cutting mode, for the simultaneous determination of nucleotides and veterinary drug residues in sheep’s milk. Two-dimensional liquid chromatography (2D-LC) allows for the separation of these compounds in a single chromatographic run despite their differing physicochemical properties. The proposed method separates six veterinary drug residues and five NMPs in a single injection. The compounds were separated using a C18 reversed-phase column in the first dimension and a Primesep SB analytical column in the second dimension. The method performance was evaluated in terms of linearity range, detection and quantification limits, matrix effects, precision, and accuracy. The results demonstrated good linearity and sensitivity, with quantification limits allowing for the quantification of veterinary drugs at the maximum residue level and nucleotides at typical levels found in milk samples. The method has been successfully applied to the analysis of sheep’s milk samples acquired from local supermarkets, with recoveries within a range of 70-119 % and 82-117 % for veterinary residues and NMPs, respectively.

The onset of the Coronavirus 2019 (COVID-19) pandemic has challenged the worldwide healthcare sector, including dentistry. The highly infectious nature of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) virus and risk of transmission through aerosol generating procedures has profoundly impacted the delivery of dental care services globally for months causing prioritization of critical dental needs and suspension of routine dental procedures. As dental practices with strengthened infection control strategies and preventive measures are re-opening in the “new normal” period, it is the responsibility of healthcare professionals to constantly analyze new data and limit the spread of COVID-19 in dental care settings. With the new variants of SARS-CoV-2 rapidly emerging in different geographic locations, a definite need to comply more than ever with the rigorous public health measures to mitigate COVID -19 transmission exists. The aim of this article is to provide dental clinicians with essential information regarding both the spread of SARS-CoV-2 virus and protective measures against COVID-19 transmission in dental facilities. By compiling guidance and standard protocols recommended by credible national and international organizations, this article serves as an aid to navigating through this unprecedented time with ease. Much to learn about COVID-19 exists and because of constant ongoing research, we are not aware of all of the newly found information. However, in this paper, we reviewed the available literature recommended for the best current practices that must be taken for a dental office to function safely and successfully.

We present a new method for assessing the strength of fuzzy rules with respect to a dataset, based on the measures of the greatest energy and smallest entropy of a fuzzy relation. Considering a fuzzy automaton (relation) in which A is the input fuzzy set and B the output fuzzy set, the fuzzy relation R1 with greatest energy provides information about the greatest strength of the input-output and the fuzzy relation R2 with the smallest entropy provides information about uncertainty of the relationship input-output. We consider a new index of the fuzziness of the input-output based over R1 and R2. In our method this index is calculated for each pair of input and output fuzzy sets in a fuzzy rule. A threshold value is set for choosing the most relevant fuzzy rules with respect to the data.

Seeds from several Ribes taxa were surveyed for phenolic compounds and in vitro antiproliferative activity against HT-29 colorectal cancer cells. Total phenolic compounds were analysed through the Folin-Ciocalteu procedure, while phenolic profiles were analysed by LC coupled to a single mass spectrometer Orbitrap using an electrospray interface (ESI). Antitumor effects were established using the MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) assay. Total phenolics ranged from 11.4 in R. alpinum to 94.8 mg of caffeic acid equivalents (CAE)/g in R. nigrum 'Koksa'. Concerning phenolic compounds, four were hydroxylated benzoic acids, four cinnamic acid derivatives, eight flavonoids, and nine flavonoid glycosides. The growth inhibition against HT-29 cancer cells was exercised much better by R. nigrum 'Koksa' and Ribes 'Erkeeni' (GI50 37 and 42 µg/ml). All Ribes extracts, except R. nigrum 'Hara katarlik', showed higher activity than that of R. rubrum (GI50 at 72 h: 99 µg/ml). Interestingly, the highly bioactive extract from Ribes 'Erkeeni' contains all detected phenolics, while R. nigrum 'Koksa' lacks only populnin. Therefore, the high bioactivity found for such extracts could be due to a synergy due to all detected compounds. This work constitutes a comprehensive action for expanding knowledge on the phenolic profiles and antitumor activity of GLA-rich Ribes seeds.

The SBA-15 loaded with methylene blue was successfully prepared by sample adsorption of methylene blue in SBA-15 and is characterized by an XRD, SEM, FTIR, and BET. The photocatalytic activity for methyl orange (MO) degradation was investigated under visible light irradiation under LEDs. Experimental results demonstrate that the SBA-15-MB exhibited higher photocatalytic activity than SBA-15 under visible light irradiation. The degradation efficiency of MO (50 ppm) by SBA-15-MB could reach 80% within 180 min under 25W LED visible light. The photocatalytic activity of SBA-15 could be attributed to the excitation of methylene blue by visible light, the transfer of electrons from methylene blue to SBA-15, and the production of radicals at the surface of SBA-15.

In social sciences, a plethora of studies utilize nominal data to establish the relationship between the variables. This, in turn, requires the correct use of correlation technique. The choice of correlation technique depends upon the underlying assumptions and power of the test of significance. The objective of the research is to explore the best measure of association for nominal data in terms of size, power and bias in estimation. Monte Carlo simulations reveal that the Phi and Pearson correlation statistics performs equally well in terms of size, power, and bias for naturally dichotomous variables. When both variables are artificially dichotomized, the Tetrachoric statistic has an edge in terms of bias to Pearson correlation statistic. If one variable is continuous and other is artificially dichotomized, the Biserial correlation measure turns out to be less biased as compared to Pearson statistic although both statistics exhibit similar power and size properties. If one variable is continuous and other is naturally dichotomized, it is hard to choose between the Point Biserial and Pearson correlation measures. Finally, if one variable is naturally dichotomous and other is artificially dichotomized, correlation coefficient V is compared with Pearson, Phi and Tetrachoric correlation techniques in terms of bias in estimate. The results indicate that the Tetrachoric statistic considerably overestimates the correlation value against non-normal distributions. Pearson and Phi correlation slightly underestimate the correlation value. In contrast, the correlation statistic V perform well.

Applications in high-performance computing (HPC) may not use all available computational resources, leaving some of them underutilized. By co-scheduling, i.e. running more than one application on the same computational node, it is possible to improve resource utilization and overall throughput. Some applications may have conflicting requirements on resources and co-scheduling may cause performance degradation, so it is important to take it into account in scheduling decisions. In this paper, we formalized co-scheduling problem and proposed multiple scheduling strategies to solve it: an optimal strategy, an online strategy and heuristic strategies. These strategies vary in terms of the optimality of the solution they produce and a priori information about the system they require. We showed theoretically that the online strategy provides schedules with a competitive ratio that has a constant upper limit. This allowed us to solve the co-scheduling problem using heuristic strategies that approximate this online strategy. Numerical simulations showed how heuristic strategies compare to the optimal strategy for different input systems. We proposed a method for measuring input parameters of the model in practice and evaluated this method on HPC benchmark applications. We showed high accuracy of measurement method, which allows to apply proposed scheduling strategies in scheduler implementation.

The present work is concerned with the study of the generalized Langevin equation and its link to the physical theories of statistical mechanics and scale relativity. It is demonstrated that the form of the coefficients of Langevin equation depend critically on the assumption of continuity of the reconstructed trajectory. This in turn demands for the fluctuations of the diffusion term to be discontinuous in time. This paper further investigates the connection between the scale-relativistic and stochastic mechanics approaches, respectively, with the study of the Burgers equation, which in this case appears as a stochastic geodesic equation. By further demanding time reversibility of the drift the Langevin equation can also describe equivalent quantum-mechanical systems in a path-wise manner. The resulting statistical description obeys the Fokker-Plank equation of the probability density of the differential system, which can be readily estimated from Monte Carlo simulations of the random paths. Based on the Fokker-Plank formalism a new derivation of the transient probability densities is presented. Finally, stochastic simulations are compared to the theoretical results.

Esterquats constitute a unique group of quaternary ammonium salts (QASs) that contain an ester bond in the structure of the cation. Despite the numerous advantages of this class of compounds, only two mini-reviews discuss the subject of esterquats: the first one (2007) briefly summarizes their types, synthesis, and structural elements required for a beneficial environmental profile and only briefly covers their applications whereas the second one only reviews the stability of selected betaine-type esterquats in aqueous solutions. The rationale for writing this review is to critically reevaluate the relevant literature and provide others with a “state-of-the-art” snapshot of choline-type esterquats and betaine-type esterquats. Hence, the first part of this survey thoroughly summarizes the most important scientific reports demonstrating effective synthesis routes leading to the formation of both types of esterquats. In the second section, the susceptibility of esterquats to hydrolysis is explained, and the influence of various factors, such as the pH, the degree of salinity or the temperature of the solution, was subjected to thorough analysis that includes quantitative components. The next two sections refer to various aspects associated with the ecotoxicity of esterquats. Consequently, their biodegradation and toxic effects on microorganisms are extensively analyzed as crucial factors that can affect their commercialization. Then, the reported applications of esterquats are briefly discussed, including functionalization of macromolecules, such as cotton fabric as well as their successful utilization on a commercial scale. The last section demonstrates the most essential conclusions and reported drawbacks that allow us to elucidate future recommendations regarding the development of these promising chemicals.

Informational (Shannon) measures of symmetry are introduced and analyzed for the patterns built of 1D and 2D shapes. The informational measure of symmetry Hsym (G) characterizes the an averaged uncertainty in the presence of symmetry elements from the group G in a given pattern; whereas the Shannon-like measure of symmetry Ωsym (G) quantifies averaged uncertainty of appearance of shapes possessing in total n elements of symmetry belonging to group G in a given pattern. Hsym(G1)=Ωsym(G1)=0 for the patterns built of irregular, non-symmetric shapes. Both of informational measures of symmetry are intensive parameters of the pattern and do not depend on the number of shapes, their size and area of the pattern. They are also insensitive to the long-range order inherent for the pattern. Informational measures of symmetry of fractal patterns are addressed. The mixed patterns including curves and shapes are considered. Time evolution of the Shannon measures of symmetry is treated. The close-packed and dispersed 2D patterns are analyzed.

The calculation of the collapse load of spherical domes is addressed using a semi-analytical approach under the hypotheses of small displacements and perfect plasticity. The procedure is based on the numerical approximation of the self-stress that represents the projection of the balance equilibrium null space on a finite dimensional manifold. The so obtained self-equilibrated stress span is superimposed to a finite element linear elastic solution to the prescribed loads yielding to the statically admissible set accordingly to Melan’s theorem. The compatibility of the stress with the constitutive law of the material has been enforced using linearized limit domain in terms of generalized stress, namely axial force and bending moment along the local spherical curvilinear coordinates. The procedure has been tested with reference to numerical and experimental data from the literature confirming the accuracy of the proposed method. The comparison with the literature confirms that the buckling load is much greater than the plastic collapse loads both calculated through the proposed procedure and reported in the quoted literature.

In Differentiated Services (DiffServ) architecture, Priority Service System (PSS) plays a vital responsibility to provide Quality-of-Service (QoS) for the applications based on networks. Priority queuing systems has always been a subject of interest for analytical modelling and evaluating the performance. However, previous works have mainly focused on performing priority queuing under range dependent traffics, namely Short Range Dependent (SRD) or Long Range Dependent (LRD). Recent studies revealed that realistic traffic demonstrates a heterogeneous nature for the modern networks that provide multiple services. In this paper, the results of analytical and simulation models of dynamic priority service systems is reviewed to study the heterogeneous traffic impact on designing and performance of the systems based on networks. In this paper, the results of analytical and simulation models of dynamic priority service systems is reviewed to investigate the impact of heterogeneous traffic on the design and performance of network-based systems. Here, the time of presence of requests in limited and unlimited buffer system is restricted. If the restriction is violated, the requests will be lost. The results of experiments conducted on both models are compared and it is identified that they differ in the allowable limit (2-9) %.

The World Health Organization declared the coronavirus disease 2019 (COVID-19) pandemic in 2020, following which a global genetic vaccination program has been rapidly implemented as a fundamental solution. However, it has been reported worldwide that the modified mRNAs encoding spike proteins and lipid nanoparticles, which are used as drug delivery systems, not only cause thrombosis and cardiovascular disorders post vaccination, but might also cause diverse diseases involving all organs and systems, including the nervous system. Furthermore, the toxicity and pathogenicity of spike proteins may necessitate defining these proteins as nonbiological infective material. Based on these reports and the abundant evidence that has come to light in the past few years, this paper aims to draw the attention of medical professionals to the various risks associated with transfusion using blood products derived from long COVID patients or from genetic vaccine recipients, and to make proposals regarding specific inspection items, testing methods, regulations, etc. This paper provides insights to address the post-vaccination syndrome and its consequences following such genetic vaccination programs.

Background: Injury is an important cause of mortality and morbidity.(1). FA is the immediate assistance provided to a suddenly injured or sick person until professional help arrives or that person has recovered.(2), could be a potential factor differentiating between life and death in RTA . Many lives would be saved if proper first aid is provided early. (3) In the middle east, there are limited studies that explore knowledge and practices towards first aid needed during RTA. Objective: The main aim of this study is to investigate the knowledge and attitude towards first aid among drivers in Sharjah. Methodology: A cross-sectional study was conducted through a self-administered questionnaire written in Arabic and English languages. Participants were 18 years or older holding a driving license in the city of Sharjah. Paramedics and certified participants with a certification from authorized organizations were excluded . A non-proportional convenient sampling method was used. A total of 343 participants have completed the questionnaires. Data was entered and analysed using SPSS. Results: Majority of the study participants were less than 40 years old and (56.76%) were males. Most participants(94.2%) indicated that they know the term ‘First Aid’. However, (49.73%) of the participants knew the ambulance number and (52.43%) of the participants indicated that the victim should be moved to the hospital without the ambulance. With regards to attitude, 34.86% were not willing to provide first aid in the case of RTA. The main reason was lack of knowledge followed by fear of legal consequences. Most participants (83,78%) were willing to participate in first aid classes to improve their knowledge and attitude. Conclusion: Most participants are aware of the basic term of first aid; however, they are not willing to provide first aid in cases of RTA due to lack of knowledge and fear of legal consequences. Based on these findings we recommend providing first aid classes for new drivers and to obtain certification. References: 1 and 3. Midani, O., Tillawi, T., Saqer, A., Hammami, M., Taifour, H. and Mohammad, H., 2020. Knowledge And Attitude Toward First Aid: A Cross-Sectional Study In The United Arab Emirates. 2.Van de Velde S, Heselmans A, Roex A, Vandekerckhove P, Ramaekers D, Aertgeerts B. Effectiveness of nonresuscitative first aid training in laypersons:A systematic review. Ann Emerg Med 2009;54:447-57, 457e1-5.

Biosecurity is a tool used to alleviate the introduction, emergence and spread of diseases caused by infectious agents. It comprises different health-management activities that need to be followed to reduce the passage and dissemination of infectious agents within and among farms, poultry flocks, and humans, as well as within a country, among countries, or the whole globe. In terms of public health measures, biosecurity applies to practices that will reduce contact between poultry and humans and thereby reduce zoonotic disease transmission. Two of the common biosecurity measures are bioexclusion and biocontainment which themselves are further categorized as segregation/isolation, movement control and hygiene/sanitation/disinfection. Isolation is about putting poultry under an exclusively isolated environment where it lives alone without any interference from any source external to the poultry or at least under reduced and controlled interference. Movement/traffic control and sanitation measures are practices to follow the isolation of poultry or preparatory phase as in the case of sanitation of poultry houses before introduction of poultry. These techniques have been effective in controlling poultry diseases like avian influenza, exotic Newcastle, Marek’s disease, and any other diseases. Depending upon the underlying situation either bioexclusion or biocontainment measure will be used to control these infectious diseases of poultry.

Mobile Cloud Computing(MCC) is a recent technology used by various users worldwide. In 2015, more than 240 million users used mobile cloud computing which gives a profit of $5.2 billion to service providers. MCC is a combination of Mobile computing and cloud computing. By the combination of these two, it gives various challenges like network access, elasticity, management, availability, security, privacy, etc. Here security issues are considered because both the security issues of mobile computing and cloud computing are considered as important like data security, virtualization security, partitioning security, Mobile cloud application security, Mobile device security. This paper gives a detailed study of security issues in mobile cloud computing and its prevention measures.

This short paper reveals a simple methodology to create local-correlation models suitable for the closed-form pricing of multi-asset financial derivatives. The multivariate models are built to ensure two conditions, first, marginals follow desirable processes, e.g. we choose the Geometric Brownian Motion (GBM), popular for stock prices. Second, the payoff of the derivative should follow a desired one dimensional process. These conditions lead to a specific choice of the dependence structure, in the form of a local-correlation model. Two popular multi-asset options are entertained, a spread option and a basket option.

Social Business Intelligence (SBI) enables companies to capture strategic information from public social networks. Contrary to traditional Business Intelligence (BI), SBI has to face the high dynamicity of both the social network contents and the company analytical requests, as well as the enormous amount of noisy data. Effective exploitation of these continuous sources of data requires efficient processing of the streamed data to be semantically shaped into insightful facts. In this paper, we propose a multidimensional formalism to represent and evaluate social indicators directly from fact streams derived in turn from social network data. This formalism relies on two main aspects: the semantic representation of facts via Linked Open Data and the support of OLAP-like multidimensional analysis models. Contrary to traditional BI formalisms, we start the process by modeling the required social indicators according to the strategic goals of the company. From these specifications, all the required fact streams are modeled and deployed to trace the indicators. The main advantages of this approach are the easy definition of on-demand social indicators, and the treatment of changing dimensions and metrics through streamed facts. We demonstrate its usefulness by introducing a real scenario user case in the automotive sector.

In power systems there are complex transformer structures, whose accurate analysis is not possible using the techniques available today. This paper presents a systematic data driven analysis method for coupled inductors of arbitrary complexity. The method first establishes a winding matrix N mapping the windings to the limbs of the transformer. A permeance matrix P is created from the reluctance network of the magnetic core. A generalized inductance matrix L mapping currents in the transformer windings to the induced voltages is generated based on the winding (N) and permeance (P) matrices. The inductance matrix representation of a coupled inductor is then transformed to an admittance matrix, which can be integrated to the nodal analysis of the electrical circuit surrounding the coupled inductor. The method presented is validated by simulations with real transformer structures using electromagnetic transient program (EMTP/ATP).

To get more data concerning the influence of fertilizers (organic and mineral) on different forage plants existing in North-eastern Romanian grassland, the mass fractions of 14 essential, enzymatic, or considerd toxic elements was determined by Instrumental Neutron Activation Analysis together with the amount of crude proteins, ash, fibres as well as ether fact extract. Final results showed a significant variance of the content of analysed elements on organic as well as on mineral fertilized experimental plots, i.e. the content increased in 24% of plots, decreased in 23%, and remained unchanged in 45% while in 8% of plots their content was below the detection limits, as the case of Se. At the same time, an increase content of crude protein and ether extract was evidenced in fertilized grasses for all applied fertilizers while other global indicators such as neutral and acid fibre of sufuric lignin content decreased, suggesting significant higher nutritional values of fertilized forage plant.

Cross-cultural mobility is a phenomenon that is increasingly growing, and the resulting stress has become a severe health issue. Thus, we conducted a systematic review of articles reporting research on stress measures of cross-cultural mobility or acculturative stress, emphasizing its internal structure. We adopted the PRISMA procedures for scoping reviews (e.g., searching articles in databases), resulting in the inclusion 20 articles in the final analysis that present evidence of validity based on the internal structure of 16 measures. The most common factors identified were related to cultural stressors, language stressors, and discrimination stressors. After analyzing a cross-cultural mobility stress concept implicit in the definitions used in the articles, we found that most measures of acculturative stress did not evaluate it according to the Stress and Coping Model of Lazarus and Folkman. Most measures only focused on part of the phenomena (some estimated the stressors, others the coping strategies). Few took into account the physiological and psychological responses to internal or external stressors, and even fewer considered its positive aspects (eustress). Consequently, it is pivotal to develop measures that take into account the multiple dimensions of the cross-cultural mobility stress. Other results (e.g., validity evidence of the measures) and limitations of this systematic scoping review are presented and discussed.

Objectives: One of the home-made herbal remedy being traditionally used against gout is evaluated to identify any new and characteristic marker compound which may be used as characteristic analytical marker to standardize this polyherbal remedy. Materials and method: A distinct and remarkable peak in the HPLC chromatogram of remedy was identified which was further isolated by fraction collector. This fraction was then evaporated and characterized for structure elucidation using set of various techniques such as RP-HPLC,UV, FTIR, TLC, EIMS and NMR. Results: The compound characterized was non polar compound, ester of betulin and palmitoleic acid. Although the remedy has been standardized using set of four markers as discussed in literature but this newly developed marker compound can be used to further standardize this remedy and other herbal preparations comprising of this marker compound.Conclusion: Hence the isolated compound can be used as novel analytical marker in the standardization of this herbal remedy and the other herbal preparations containing such marker compound

Currently, Pythagorean fuzzy sets (PFSs) have been widely applied in various fields due to their substantial advantages in expressing and dealing with uncertainty. However, measuring the similarity and difference between PFSs effectively remains an unresolved issue. Inspired by Tanimoto similarity, we propose a novel set of similarity and distance measures for PFSs. We delve into the theoretical properties of the proposed measures and compare it with existing PFSs measures. Numerous numerical examples validate their rationality and effectiveness. Furthermore, our experimental findings suggest that in contrast to existing measures, the introduced measures successfully circumvent various counter-intuitive issues encountered by current measures, and yield more pronounced outcomes in the discrimination of different fuzzy sets. This enhances the uniqueness and superiority of our measures. Finally, we developed two decision models based on the proposed measures and validated their applicability in three applications.

Background: Epileptic patients frequently encounter cognitive impairment. Functions that are mostly affected involve memory, attention and executive function; however this is mainly dependant on the location of the epileptic activity. The aim of the study is to assess cognitive functions in MRI-negative epilepsy patients by means of neurophysiological and neuropsychological measures. Methods: The patients were enrolled from the outpatient Epilepsy/Clinical Neurophysiology clinic over a time period of 6 months. The study sample comprised 20 MRI negative epilepsy patients [mean age ± standard deviation (SD), 30.3 ± 12.56 years; age range 16-60 years; average disease duration, 13.95 years) and 10 age-matched controls (mean age ± SD, 24.22 ± 15.39 years), that were also education-matched (p>0.05) Patients with epileptogenic lesions were excluded from the study. Informed consent was obtained from all subjects involved in the study. Auditory ERPs and the cognitive screening tool EpiTrack, were administered to all subjects. Results: Latencies of P300 and slow waves were prolonged in patients compared to controls (p<0.05). ASM load and the patients’ performance in the EpiTrack maze subtest were the most significant predictors of P300 latency. A decline in memory, attention, and speed of information processing has been observed in patients with cryptogenic epilepsy compared to age-matched controls, as reflected by P300 latency and EpiTrack scores.

Measuring bias is important as it helps identify flaws in quantitative forecasting methods or judgmental forecasts. It can, therefore, potentially help improve forecasts. Despite this, bias tends to be under-represented in the literature: many studies focus solely on measuring accuracy. Methods for assessing bias in single series are relatively well-known and well-researched, but for datasets containing thousands of observations for multiple series, the methodology for measuring and reporting bias is less obvious. We compare alternative approaches against a number of criteria when rolling-origin point forecasts are available for different forecasting methods and for multiple horizons over multiple series. We focus on relatively simple, yet interpretable and easy-to-implement metrics and visualization tools that are likely to be applicable in practice. To study the statistical properties of alternative measures we use theoretical concepts and simulation experiments based on artificial data with predetermined features. We describe the difference between mean and median bias, describe the connection between metrics for accuracy and bias, provide suitable bias measures depending on the loss function used to optimise forecasts, and suggest which measures for accuracy should be used to accompany bias indicators. We propose several new measures and provide our recommendations on how to evaluate forecast bias across multiple series.

The climate of Bangladesh has changed drastically which may put considerable adverse impacts on mangrove fishers but very few studies focused on this professional group. An attempt was made to perceive the impact and adaptation measures of the Sundarbans mangrove resource users, employing interviews and focus group discussions. A total of 150 respondents were randomly selected from the Sundarbans west under Shyamnagar Upazila of Satkhira District. It was revealed that the abundance of fishes, fuel woods, honey, golpata (Nypa fruticans), and shrimp post-larvae (PL) was reduced considerably. The resource users have adapted themselves by changing their occupation and becoming jobless and depending on the other family members. PL collection, honey collection, shrimp culture, and wood collection were found professional adapting strategies to adopt cyclone, flood, salinity intrusion, river erosion, and drought. Several recommendations are elicited, the implementation of which is important to ensure livelihood sustainability of the mangrove communities.

This study aims to assess using a smartphone app (DecibelX), as a noise measuring alternative to the more costly traditional use of measuring noise levels with a Sound Level Meter (SLM). The study compares the accuracy of the app to readings taken with a SLM and dosimeter, and also evaluates the app’s performance for pure tone and narrow band noise. And a usability study identifies strengths and weaknesses related to usability of the app.

In this study, the fuzzy c- means classifier has been studied with nine other similarity and dissimilarity measures: Manhattan distance, chessboard distance, Bray-Curtis distance, Canberra, Cosine distance, correlation distance, mean absolute difference, median absolute difference and normalised squared Euclidean distance. Both single and composite modes were used with a varying weight constant (m) and also at different α-cuts. The two best single norms obtained were combined to study the effect of composite norms on the datasets used. An image to image accuracy check was conducted to assess the accuracy of the classified images. Fuzzy Error Matrix (FERM) was applied to measure the accuracy assessment outcomes for a Landsat-8 dataset with respect to the Formosat-2 dataset. To conclude FCM classifier with Cosine norm performed better than the conventional Euclidean norm. But, due to the incapability of the FCM classifier to handle noise properly, the classification accuracy was around 75%.

Jakarta belongs to the cities with the highest flood risk in the world. Its flood hazard is driven by land subsidence, soil sealing, changes in river discharge and increasingly sea level rise. As all of these trends are set to continue, Jakarta’s flood hazard is expected to intensify in the future. Designing and implementing risk reduction and adaption measures is therefore of utmost importance. Against the background, the paper draws on a discourse analysis and original empirical household survey data to review and evaluate current adaptation measures and to analyze in how far they describe a path that is transformative from previous risk reduction approaches. The results show that the focus is clearly on engineering solutions, foremost in the Giant Sea Wall project. The project is likely to transform the city’s flood hydrology. However, it cements rather than transforms the current risk management paradigm which gravitates around the goal of controlling flood symptoms, rather than addressing their anthropogenic root causes. The results also show that the planned measures are heavily contested due to concerns about ecological impacts, social costs, distributional justice, public participation and long-term effectiveness. On the outlook, the results therefore suggest that the more the flood hazard will intensify in the future, the deeper a societal debate will be needed about the desired pathway in flood risk reduction and overall development planning – particularly with regards to the accepted level of transformation, such as partial retreat from the most flood-affected areas.

Rivaroxaban and aspirin are commonly used antithrombotic agents that are used in combination for the prevention of coronary artery disease (CAD) and atherothrombotic events in adult patients after an acute coronary syndrome (ACS) with elevated cardiac biomarkers, or with coronary artery disease (CAD) or symptomatic peripheral artery disease (PAD) in high-risk patients. The recommended dosage is 2.5 mg Rivaroxaban twice daily with 75–100 mg aspirin daily. This study aimed to develop a fixed-dose combination tablet of rivaroxaban (2.5 mg) and aspirin (50 mg) to decrease the patient's pill burden and enhance medication adherence. The product formula was developed based on compatibility studies among the active ingredients and the active ingredients' compatibility studies. The formula and the manufacturing procedure were chosen based on the risk assessment for each active substance, wet granulation with both actives intragranular was found to have faster dissolution than direct mix formulae. Furthermore, a validated reverse-phase HPLC stability indicator method was developed to detect APIs and their possible degradants in the formula.

Information-related measures are useful tools for multi-variable data analysis, as measures of dependence among variables, and as descriptions of order and disorder in biological and physical systems. Measures, like marginal entropies, mutual / interaction / multi -information, have long been used in a number of fields including descriptions of systems complexity and biological data analysis. The mathematical relationships among these measures are therefore of significant inherent interest. Relations between common information measures include the duality relations based on Möbius inversion on lattices. These are the direct consequence of the symmetries of the lattices of the sets of variables (subsets ordered by inclusion). While these relationships are of significant interest there has been, to our knowledge, no systematic examination of the full range of relationships of this diverse range of functions into a unifying formalism as we do here. In this paper we define operators on functions on these lattices based on the Möbius inversions that map functions into one another (Möbius operators). We show that these operators form a simple group isomorphic to the symmetric group S₃. Relations among the set of functions on the lattice are transparently expressed in terms of the operator algebra, and, applied to the information measures, can be used to derive a wide range of relationships among diverse information measures. The Möbius operator algebra is naturally generalized which yields extensive new relationships. This formalism now provides a fundamental unification of information-related measures, and the isomorphism of all distributive lattices with the subset lattice implies an even broader application of these results.

Human African Trypanosomiasis (HAT) commonly known as sleeping sickness, is a neglected tropical vector borne disease caused by trypanosome protozoa. It is transmitted by bites of infected tsetse fly. In this paper we first present the vector-host model which describes the general transmission dynamics of HAT. In the tsetse fly population, the HAT is modelled by three compartments while in the human population, the HAT is modelled by four compartments. The next generation matrix approach is used to derive the basic reproduction number, R₀, and also it is proved that if R₀ ≤ 1 the disease free equilibrium is globally asymptotically stable, which means the disease dies out. The disease persist in the population if the value of R₀ > 1. Furthermore, the optimal control model is determined by using the Pontryagin’s maximum principle with control measures such as education, treatment and insecticides used to optimize the objective function. The model simulations confirm that the use of the three control measures are very efficient and effective to eliminate HAT in Africa.

Background: Participation is low (43%) in Australia’s National Bowel Cancer Screening Program which provides a biennial Fecal Immunochemical Test kit mailed to the home of Australians aged 50-74 years. While several factors for non-participation have been identified, the role of mental and physical health on screening behaviour has not been assessed. Methods: Participants of the Australasian Colorectal Cancer Family Registry Cohort were asked to complete a questionnaire on their colorectal cancer screening in the past five years and a validated measure of mental and physical health. The association between mental and physical health and screening was determined for Australian participants aged 45-75 years who had never been diagnosed with colorectal cancer. Multivariable logistic regression was used to adjust for measured potential confounders. Results: Of the 1130 eligible participants, 819 reported colorectal cancer screening in the past five years (72%). After adjusting for potential confounders, there was no evidence that overall mental or physical health was associated with colorectal cancer screening. However, one specific scale, general health, was positively associated with colorectal cancer screening (p=0.014) with those reporting higher levels of general health undergoing screening.Conclusion: We found limited evidence that mental and physical health, as measured by a short questionnaire, are associated with colorectal cancer screening. A potential limitation is reverse causation where previous screening may have impacted mental or physical health. A more detailed study of physical and mental health as barriers or enablers of screening is needed.

Until recently, the classic approach to mineral exploration studies is to bring the field samples/drill cores collected during field studies to the laboratory followed by laborious analysis procedures to generate the analytical data. This is very expensive, time consuming and difficult for exploring vast areas. But rapid technological advances in field portable analytical instruments such as portable ultraviolet–visible and near-infrared spectrophotometers, gamma ray spectrometer, pXRF, pXRD, pLIBS, and µRaman spectrometer have changed this scenario completely and increased their on-site applications in mineral exploration studies. These instruments are currently providing direct, rapid, on-site, real-time, non-destructive, cost-effective identification, and determination of target elements, indicator minerals and pathfinder elements in rock, soil, and sediment samples. These portable analytical instruments are currently helping to obtain accurate chemical and mineralogical information directly in field with minimal or no sample preparation, and providing decision-making support during field work as well as during drilling operations in several successful mineral exploration programs. In this article, the developments in these portable devices, and their contributions in the platinum group elements (PGE), rare earth elements (REE), gold, base metals, and lithium exploration studies both on land and on ocean bed have been summarized with examples.

There is a case about a system comprising two queues of M/M(a)/1/K with a due date with FCFS service policy in each queue. Using the methods of simulation and mathematical analysis, the solution diagrams were illustrated for the fixed due date Ɵ=1 second at the phase of due date up to the commencement of the service, limited capacity K₁=5 and K₂=4, for both scenarios of different service management rate resulted. For the analytical solution, first, a SAN model from the system was created in the Mobius tool. For simulation, a java discrete systems simulation code was used. Adjustment of the initial values, selection of the scenarios for service rate, the number of the consumers in the simulation, etc. were all carried out in the simulation code.

(1) Background: The COVID-19 pandemic significantly affected worldwide, with varying responses implemented to control its spread. This study aimed to compare the epidemic data compiled by the World Health (2) Methods: Organization to understand the impact of the measures adopted by each country on the mortality rate. The increase or decrease in the number of confirmed cases was understood in logarithmic terms, for which logarithmic growth rates “K” were used. The mortality rate was calculated as the percentage of deaths from the confirmed cases, which was also used for logarithmic comparison. (3) Results: Countries that effectively detected and isolated patients had a mortality rate 10 times lower than those that did not. Although strict lockdowns were once effective, they could not be implemented on an ongoing basis. In fact, after their cancelation, large outbreaks occurred because of medical breakdowns. The virus variants mutated with increased infectivity, which impeded the measures that were once effective, including vaccinations. Although the designs of mRNA vaccines were renewed, they could not keep up with the virus mutation rate. The only effective defence was steadily identifying and isolating patients. (4) Conclusions: These findings have crucial implications for the complete containment of the pandemic and future pandemic preparedness.

Hospitals are perpetually challenged by the dual requirements of concurrently improving the quality of healthcare and maintaining financial solvency. Both issues are among the top concerns for hospital executives across the United States, yet some have questioned if the efforts to enhance quality are financially sustainable. led us to examine if improving quality in the hospital setting impacts revenue. Using multivariate regression, we assessed if numerous quality measures were associated with our targeted measure of hospital profitability: the net patient revenue per adjusted discharge. The independent variables included the HCAHPS Summary Star Rating, Hospital Compare Overall Rating, All-Cause hospital-wide Readmission Rate, Total Performance Score, Clinical Outcomes Domain Score, Safety Domain Score, Person and Community Engagement Domain Score, and the Efficiency and Cost Reduction Score. Our results indicated that improving quality was significantly associated with improved net patient revenue per adjusted discharge for seven of the eight of these quality measures at the hospital level. It is clear that failing to address quality and patient safety issues is costly for US hospitals, thus we believe our findings support the premise that increased attention to the quality of care delivered as well as patients’ perceptions of care may allow hospitals to accentuate profitability and advance a hospital’s financial position.

SMEs constitute the backbone of the Syrian economy which have suffered manifold challenges due to the continuous Syrian war. Covid-19 added further pressures on Syrian SMEs and force them to take certain adaptation strategies to survive. This paper aims to investigate the main challenges that face Syrian SMEs during the pandemic and illustrate how they respond to adversities emerged from governmental intervention to control the spread of the virus. It also discusses the measures initiated by the government to support SMEs during the pandemic. Through interviewing persons from the Syrian SMEs ecosystem, we find that high interest rates on SMEs loans, decline on demand as well as high inflation represent the main challenges. SMEs respond to these challenges by marketing products online, stock procurement, and strengthen connections with stakeholders. We recommend the Syrian authorities reduce lending rates and increase loan size available to SMEs to help them overcome the pandemic adversities. Moreover, SMEs will immensely benefit from training on digital tools to enhance their expansion and survival opportunities. Furthermore, bazars should be organized around the year to give SMEs the opportunity to gain continuous access to markets. In addition, incubation services should be revised, particularly, to SMEs with great potential to grow to create the suitable environment for them to scale and flourish.

The relationship between the street environment and the health, education, mobility, and criminal behaviors of its citizens has long been investigated by economists, sociologists and urban planners. Home buyers were found to pay a premium for better street appearance. Prior studies considering streetscapes mainly focus on objective measures such as the number of nearby trees, the tree canopy area, or the view index of physical features such as greenery, sky or building. However, subjective perceptions may have complex or subtle relationships to physical features, individual physical features or simply summing them up do not capture people’s comprehensive perception. In contrast, this study proposed a new approach for the urban-scale application to quantify both subjectively and objectively measured streetscape scores for six important perception qualities, namely Greenness, Walkability, Safety, Imageability, Enclosure, and Complexity. Built on prior quantitative studies in urban design quality and emerging applications in deep learning and open source street view imagery for urban perceptions, we integrated existing frameworks to (1) effectively collect and evaluate both subjectively and objectively- measured perceptions; (2) investigate the coherence and divergence in ML-predicted subjective scores and formula-derived objective scores; and (3) compare their effects in affecting house prices taking Shanghai as a case study using a large-scale dataset on home transactions. The results implied: first, the percentage increase in sales price attributable to street scores is significant for both subjective and objective measurements. In general subjective scores explained more variance over structural attributes and objective scores in hedonic price model. Particularly, objective Greenness, subjective Safety and Imageability scores positively affected house prices. Second, for Greenness and Imageability scores, the subjective and objective measures exhibited opposite signs in affecting house prices, which implied that there might be mechanisms related to the psychological, social-demographical characteristics of street users that have not been fully incorporated by objective measures that taking view indices or recombination of them. In addition, certain objective measure might outperform subjective counterpart when the connotation of the perception is self-evident and not complicated, for example the Greenness. For those concepts were not familiar to the average person, subjective framework exhibits better performance. This is the first study comprehensively expanding hedonic price method with both subjectively and objectively measured streetscape qualities. It suggested that city authorities could levy a street environment tax to compensate the public budget invested in street environment where developers secured benefits from a price premium. This study enriches our understanding of the economic values of the subjective and objective measures street qualities. It sheds light on promising future study areas where the coherence and divergence of the two measurements should be further stressed.

The coronavirus of severe acute respiratory syndrome 2 (SARS-CoV-2), known as COVID-19, has spread rapidly around the world, leading to social detachment and the home office replacing face-to-face work. The performance of police officers faces limitations to the new requirements, while recognizing the need to ensure health and quality of life. Thus, the present study aimed to verify the panorama of the spread of COVID-19 among federal police officers by analyzing the presence of symptoms, individual protection measures (IPM), suspect screening measures (SSM) and examination for total antibodies (IgA, IgG and IgM). For this, data were collected through a questionnaire customized for this situation, blood for serological testing and measurements of clinical data from 56 federal police officers in the municipality of Marília (São Paulo, Brazil). There was no positive result in the Anti-SARS-CoV-2 serological test in any sample participant. The mean value of the Body Mass Index (27.2 ± 5.4 kg / m2) suggests overweight and obesity, in addition to the presence of hypertension in 16.1%, diabetes in 3.6%, asthma in 3.6 % and obesity by 25%, which represents an important risk of complications for COVID-19. The use of a mask is the most frequent IPM (96.4%) and most of the sample has used a cloth or home mask (90.9%). However, 47.3% have not performed the correct cleaning of the masks and 5.5% have not taken any care with mask hygiene. It can be concluded that care in relation to the professional activities of federal police to date has prevented the spread of SARS-CoV-2 and that they must be maintained or increased because risk factors, which involve quality of life and worsening of the contamination condition, were detected in the participants.

New analytical solutions of the heat conduction equation are presented in cylindrical and spherical coordinates. Then these solutions are reproduced with high accuracy by recent explicit and unconditionally stable finite difference methods. After this, real experimental data from the literature regarding a heated cylinder are reproduced by the explicit numerical methods as well as by Finite Element Methods (FEM) ANSYS workbench. Convection and nonlinear radiation are also considered on the boundary of the cylinder, and it is shown that the explicit methods are much more accurate than the commercial software.

In this paper is proposed an analytical technique which can be used to obtain the forced response of a cantilevered tube conveying fluid. Considering the pipe subjected to an arbitrary harmonic force either distributed or concentrated, an analytical solution is found using Green’s function method. The solution obtained of the closed form satisfies the differential equations in a classical sense. The presented method giving the exact solutions is more precise than the classical eigenfunction expansion or Galerkin’s method with no need to the eigenfunctions or eigenvalues.

A rare genetic disorder caused by col18.a1 mutations, inherited mostly in autosomal recessive and rarely in autosomal dominant pattern, giving rise to ocular abnormalities and other associated disorders, the condition is referred to as Knobloch syndrome. This paper overviews the anterior and posterior ocular symptoms in Knobloch patients, thus demonstrating the major findings in Knobloch cases including the mutational analysis which discusses the proteins involved and exon number on which mutations are detected. Animal modeling done by knocking out col18.a1 has also been discussed to determine the functions of this gene which have been identified based on anomalies found in knock-out mice.

Keywords: Requirements prioritization, Next release plan, Software product planning, Decision support, MoSCoW, AHP, K-Menas, GMM, BIRCH, PAM, Hierarchical, Clustering, Clusters Evaluation

Oxalate is a divalent organic anion that has implications across many biological and commercial processes. It is derived from plant sources, such as spinach, rhubarb, tea, cacao, nuts, and beans, and therefore is commonly found in raw or processed food products. Oxalate can also be made endogenously by humans and other mammals as a byproduct of hepatic enzymatic reactions. It is theorized that oxalate is useful for plants to store calcium and protect against herbivory. Clinically, oxalate is best known to be a major component of kidney stones, which commonly contain calcium oxalate crystals. Oxalate can induce an inflammatory response that decreases the immune system’s ability to remove renal crystals. When formulated with platinum as oxaliplatin (an anticancer drug), oxalate has been proposed to cause neurotoxicity and nerve pain. There are many sectors of industry that are hampered by oxalate, and some that depend on it. For example, calcium oxalate is troublesome in the pulp industry and the alumina industry as it deposits on machinery. On the other hand, oxalate is a common active component of rust removal and cleaning products. Due to its ubiquity, there is interest in developing efficient methods to quantify oxalate. Over the past four decades several diverse methods have been reported. These approaches include electrode-based detection, liquid chromatography or gas chromatography coupled with mass spectrometry, enzymatic degradation of oxalate with oxalate oxidase and detection of hydrogen peroxide as a product, and indicator displacement-based methods employing fluorescent or UV light-absorbing compounds. It has become clear that no single method will work best for every purpose. This review describes the strengths and limitations of each method, and may serve as a reference for investigators to decide which approach is most suitable for their work.

While there are many models of epidemic evolution perhaps the basis for such models finds itself in the lumped behavior expressed through the so-called SIR model (Susceptible, Infectious, Recovered) from which spring many related models. This paper discusses multiple analytic solutions to that equation including those that are available in closed analytic form and those for which at least one final integral has to be done numerically, so-called quasi-analytic solutions. The solutions are intrinsically time-dependent of course. The hope is that such an investigation will lead to a better understanding of when and how models can be of use in studying the dynamical evolution of diseases including, perhaps, the great influenza pandemic of 1918 together with later pandemics and epidemics not excluding the Covid-19 pandemic of the present day.

The transmission of light is one of the key optical processes in the terrestrial environment (the atmosphere and underlying surfaces). The dependence of light transmittance on the illumination/observation conditions and optical properties of the atmosphere–underlying system can be studied using the integro-differential radiative transfer equation. However, for numerous applications a set of analytical equations is needed to describe the transmitted light intensity and flux. In this paper, we describe various analytical techniques to study light transmittance through light scattering and absorbing media. A physical significance and improved mathematical accuracy of approximations are provided using the analytical models for the diffusion exponent, average cosine of the light field, spherical and plane albedos. The accuracy of various approximations is studied using exact radiative transfer calculations with various scattering phase functions, single-scattering albedos, observational conditions, and optical depths.

Segmentation of a region of interest is an important pre-processing step for many colour image analysis techniques. Similarly segmentation of plant in digital images is an important preprocessing step in phenotying plants by image analysis. In this paper we present an analytical study to statistically determine the suitability of colour space representation of an image to best detect plant pixels and separate them from background pixels. Our hypothesis is that the colour space representation in which the separation of the distributions representing plant pixels and background pixels is maximized would be the best for detection of plant pixels. The two classes of pixels are modelled as a Gaussian mixture model (GMM). In our GM modelling we don't make any prior assumption about the number of Gaussians in the model. Rather a constant bandwidth mean-shift filter is used to cluster the data and the number of clusters and hence the number of Gaussians is automatically determined. Here we have analysed following representative colour spaces like $RGB$, $rgb$, $HSV$, $Ycbcr$ and $CIE-Lab$. This is because these colour spaces represent several other similar colour spaces and also an exhaustive study of all the colour space will be too voluminous. We also analyse the colour space feature from the two-class variance ratio perspective and compare the results of our hypothesis with this metric. The dataset for this empirical study consist of 378 digital images of plants and their manual segmentation. Dataset consist of various species of plants (arabidopsi, tobacco, wheat, rye grass etc.) imaged under different lighting conditions, indoor and outdoor, controlled and uncontrolled background. In results we obtain better segmentation of the plants in $HSV$ colour space, which is supported by its Earth mover distance (EMD) on the GMM distribution of plant and background pixels.

Multichannel EEGs were obtained from healthy participants in the eyes-closed no-task condition (where the alpha component is typically abolished). EEG dynamics in the two conditions were quantified with two related binary Lempel-Ziv measures of the first principal component and with three measures of integrated information including the more recently proposed integrated synergy. Both integrated information and integrated synergy with model order p=1 had greater values in the eyes closed condition. If the model order of integrated synergy was determined with the Bayesian Information Criterion, this pattern was reversed, and in common with other measures, integrated synergy was greater in the eyes open condition. Eyes open versus eyes closed separation was quantified by calculation of the between-condition effect size. Lempel-Ziv complexity of the first principal component showed greater separation than the measures of integrated information. The performance of the integrated information measures investigated here when distinguishing between indisputably different physiological states encourages caution when advocating for their use as measures of consciousness.

The use of risk measures such as the Value at Risk (VaR) or Tail Conditional Expectation (TCE) is required by the Basel Committee on Banking Supervision in determining a bank’s risk profile. However, both measures can be shown to have shortcomings in the information that they provide to regulators and investors. In this paper we present an introduction to risk measure calculations before demonstrating the weaknesses of these measures. Through the exploration of specific cases we show how familiar yet differing risk profiles have identical values for combinations of these measures. From this evidence we recommend that a sequence of several risk measures should be used to give a more accurate representation of the risk contained on banking balance sheet.

Lineage diversity can refer to the number of genetic lineages within species or to the number of deeper evolutionary lineages, such as genera or families, within a community. Community lineage diversity (CLD) is of interest to ecologists, evolutionary biologists, biogeographers, and those setting conservation priorities. Despite its relevance, it is not clear how to best quantify CLD. With North American tree communities as an example, we test which taxonomic and phylogenetic metrics best measure CLD. We find that phylogenetic metrics outperform taxonomic metrics. Faith’s phylogenetic diversity performs well, but is skewed towards the number of lineages in recent time. The best metric is newly derived here, and termed time integrated lineage diversity (TILD). Mapping the lineage diversity of tree communities across the contiguous United States, we find a spatial pattern differing from that of species richness in key areas. The Pacific Northwest, Great Lakes Region, state of Maine, and south-eastern piedmont and coastal plain forests all emerge as areas high in lineage diversity, but relatively lower in species richness. We urge the consideration of lineage diversity, as well as species richness, when setting conservation priorities.

The economic development and infrastructure of a nation are closely interrelated. In addition, public trust in national infrastructure facilities is closely linked to the preservation of the advantages provided by these facilities to the public. Since the 1970s, Korea has achieved exponential economic growth over a short period of time and the number of infrastructure facilities has increased correspondingly. This compressed economic development has been underpinned by the national infrastructure, whose safety and usability have been excluded from the scope of the development. However, after around 30 years, structural deterioration coupled with general insensitivity to safety in today’s society has considerably reduced public trust in using the infrastructure. Realistically, policies that mainly focus on developing new technologies related to infrastructure construction have led to practical limitations that discourage the development of technologies for maintenance or inspection. Furthermore, current maintenance works face certain limitations caused by various reasons: insufficient budget, increasing number of infrastructure facilities requiring maintenance, shortage of manpower, and rapidly increasing number of aging infrastructure facilities. To overcome these limitations, a new approach is required that is different from general inspection methods under the existing rules and regulations. In this context, this study aimed to explore the efficiency of bridge inspection and maintenance by unmanned aerial vehicles (UAVs) that could observe inaccessible areas, could be conveniently and easily controlled, and could offer high economic benefits. To this end, various tests were performed on elevated bridges, and suitable UAV images were obtained. The obtained UAV images were inspected by using machine vision technology, thereby excluding subjective evaluations by humans. Methods for enhancing the objectivity of the inspection were also discussed. The test results showed that both the efficiency and objectivity of the proposed method were better than those of the existing bridge maintenance and inspection methods.

Two-dimensional heat diffusion problem with heat source which is quasilinear parabolic problem is examined analytically and numerically. Periodic boundary conditions are used as a boundary conditions. Since the problem is not linear, Picard’s successive approximation theorem is used. Under certain conditions of natural regularity and consistency imposed on the input data, establish the existence, uniqueness and constant dependence of the solution on the data using the generalized Fourier method. As a numerical solution, implicit finite difference scheme is used. The results ob-tained from analytical and the numerical solutions are so close to each other.