The selection of biomaterials for biomedical application is a significant challenge. In the last few decades, various bioabsorbable and stable biopolymers have been applied for use as biomedical devices in orthopedic applications. Ultra-high molecular weight polyethylene (UHMWPE) has been extensively used in medical implants, notably in the bearings of hip, knee, and other joint prostheses, owing to its biocompatibility and high wear resistance. For the ACL graft, synthetic UHMWPE is an ideal candidate due to its biocompatibility and its extremely high tensile strength. Despite the appeal of new advanced materials such as carbon fiber, poly-ether-ether ketone, and other load-bearing materials, UHMWPE remains a primary load-bearing candidate material for ACL reconstructions because of its extremely high strength, the simplicity of the fabrication process, its biocompatibility, and low friction. However, some significant problems are observed in UHMWPE based implants, such as wear debris, and oxidative degradation due to the generation of free radicals when exposed to irradiation with gamma rays for grafting or sterilization. Various innovative methodologies have been developed to resolve those problems and enhance the properties of UHMWPE. In this review, we will explore in detail the methods for surface functionalization of UHMWPE and will apply these findings to the case study of UHMWPE for Anterior Cruciate Ligament repair.

Background: After the increasingly common anterior cruciate ligament reconstruction (ACLR) procedure in competitive athletes, rehabilitation is crucial for facilitating a timely return to sports (RTS) and preventing re-injury. This pilot study investigates the biomechanical and psychological outcomes of postoperative rehabilitation in competitive athletes, comparing supervised rehabilita-tion (SVR) and home-based rehabilitation (HBR). Methods: After ACLR, 60 (out of 74 screened) athletes were recruited and equally divided into 2 groups using non-probability convenience sam-pling: 30 HBR and 30 SVR (each group comprising 15 males and 15 females). Rehabilitation out-comes in respective groups were evaluated at 8 months using measures (Tegner-Activity-Scale [TAS], International Knee Documentation Committee subjective knee form [IKDC-SKF], ACL Return to Sport after Injury [ACL-RSI]) and objective parameters (isometric muscle strength, hamstring/quadriceps asymmetry). RTS was evaluated at 9 months; with ACL re-injury rates rec-orded approximately 6 months post-RTS. Results: Both groups exhibited decreased TAS scores (HBR: 8 to 6, SVR: 8 to 7), with the SVR group demonstrating superior post-operative IKDC-SKF scores (81.82 vs. 68.43) and lower ACL-RSI scores (49.46 vs. 55.25). Isometric and isokinetic mus-cle strength, along with asymmetry values, favored the SVR group 8 months post-ACLR (p

Anterior Cruciate Ligament (ACL) tear is currently a main issue in all of sports communities. Although the number of ACL injuries in football remains low, it’s consequences on both professional and personal lives remain a major concern of rehabilitation. If practitioners often require more time to bring athletes in the best condition, the fact remains that this concept of time before return to sport is nowadays considered as obsolete. Indeed, the better understanding of the mechanisms of lesion and the strains placed on the graft after reconstruction, allow us to establish a personalized program based on clinical criteria and the patient's objectives. The current scientific literature allows us today to optimize the return to play and performance by the use of neuromotor and neurocognitive approaches, muscle strengthening methods and a preventive program necessary to cover the previous level of the players while taking into account physiological and psychological changes due to ACL reconstruction. Indeed, it is important to have a systemic approach centered on the patient, the sports movement, as close as possible to the field in order to find an optimal function of the knee in interaction with its environment.If there is a risk of reinjury of the ACL, it appears important to be able to identify the risk factors so that the player can return to play in optimal conditions.

Psychological readiness following Anterior Cruciate ligament Reconstruction (ACLR) correlates with different return to sport outcomes. However, the relationship between strength and power and psychological readiness remains unexplored. The aim of this study was to investigate the relationship between the Anterior Cruciate Ligament Return to Sport After Injury (ACL-RSI) scores and various hamstrings and quadriceps strength and power variables. Twelve participants (20.7±2.5 years old; 174.2±7.5 cm; 70.2±8.5 kg; 18.2±8.3% of body fat) who had an ACLR nine months or more before the study completed the ACL-RSI questionnaire and isokinetic strength testing of the hamstrings and quadriceps (60°.s-1 and 180°.s-1). Based on ACL-RSI scores, they were divided into “cases” and “controls”, deemed not psychologically ready and psychologically ready to return to previous sport performance (PILOS), respectively. The main findings are that quadriceps’ and hamstrings’ rate of torque development (RTD) and time since surgery were determinants of psychological readiness following ACLR. Furthermore, compared to controls cases showed significantly lower angle-specific quadriceps and hamstrings torque close to extension and lower RTD, but no difference in peak torque. These results suggest that physiotherapists should facilitate athletes’ RTS by focusing on the restoration of RTD and strength at angles close to full knee extension.

Background: The optimisation of this return to athletic activity pass by a better understanding of the behaviour of the muscle involved in knee function.In this study, we focused on the muscular activity of the muscle involved in the flexion of the knee. Preciseley on the relation between the muscular activity of the gastrocnemius and the hamstring among the patient that underwent an anterior cruciate ligament reconstruction with hamstring graft.Objective : The objective of the study is to compare, the muscular activity of the flexor knee muscle in patient that underwent an anterior cruciate ligament reconstruction with hamstring autograft and the individuals that have not undergone surgery.Methods : The participants have been divided into two groups : an healthy group and an experimental group that underwent an anterior cruciate ligament recontruction with hamstring graft. The participants had to performe a strenght test on a isocinetik dynamometer. The activity of the medial gastrocnemius, lateral gastrocnemius, femoral biceps and the semitendinosus were mesured during this test.The muscular activity of the muscle mentioned of the individuals in the first group were compared to the ones in the second group via a statistical analysis. Then, a ratio of the activity of the gastrocnemius muscle on the activity of the hamstring was calculated The results of the experimental group were then compared to the results of the control groupResults : The results showed a significative difference activity of the medial gastrocnemius, the femoral biceps and the semitendinosus muscles : the experimental group results were superior to the control group results However the evaluation of the activity reporting has shown significant differences in the two groupsConclusion : This study has allowed us to show a difference in muscular activity of the gastrocnemius and hamstring muscle between patient that underwent an anterior cruciate ligament reconstruction surgery and the heathy participants. However our approch has not allowed us to identify the relation between a heihtened gastrocnemius activity and a diminished hamstring activity following an anterior cruciate ligament reconstruction with hamstring graft. Quite on the contrary, we observed a higher activity of the two muscle groups. Nevertheless, it seem to be necessary to have a variation in situations during the analysis of the gastrocnemius muscle to fully understans its purpose in the functional activity of the knee of patient that have undergone an anterior cruciate ligament reconstruction.

Osteoarthritis (OA) has become one of the most common disabilities among elders, especially in female. Obesity and mechanical injury causing OA are attributed to joint loading, cartilage disintegration, bone loss and inflammation as well. Several strategies used for treatment OA including non-pharmacological and pharmacological. Fucoidan possesses several bioactivities such as antitumor, antiviral, anticoagulation, anti-obesity, and immunomodulation. This study aims to investigate the effect of fucoidan in surgery-induced OA on diet-induced obesity rats. OA was induced by anterior cruciate ligament transection and partial medial meniscectomy (ACLT+MMx). Male SD rats were fed high-fat diet (HFD) for 4 weeks to induce obesity before ACLT+MMx to induce OA. OA rats were administered with intragastric water or fucoidan in three different concentrations (32 mg/kg, 64 mg/kg, and 320 mg/kg) after the surgeries for 40 days with HFD. We observed that the swelling in knee joint was alleviated and hind paw weight distribution was rectified after feeding fucoidan, with no significant effect on weight gain and feed intake. Fucoidan administration indicated no significant variation on HDL-Cholesterol level, but reduced plasma triglycerides and LDL-Cholesterol level. In addition, weight-bearing tests showed improvement in the fucoidan-treated group. Our results suggested that fucoidan may improve meniscal/ligamentous injury and obesity-induced OA.

Today, rupture of the anterior cruciate ligament is the most common heavy injury in athletes, but it can also occur in sedentary subjects. Its treatment, always adapted to the lifestyle, age and will of the patient, often remains surgical. However, despite its frequency and universality, there are still walking disorders following the operation. These disorders sometimes persist for several months, or even several years after surgery. The present study is therefore interested in determining the risk factors linked to walking disorders following reconstruction of the anterior cruciate ligament. The objective of this study is to determine what risk factors associated with walking disorders are after reconstruction of the anterior cruciate ligament by hamstring graft. This study focused on factors that may exist at 3 and 6 months postoperatively. Two populations participated in this study, a healthy population and a population having benefited from reconstruction of the anterior cruciate ligament. The operated test group is divided into two subgroups, one with a postoperative period of 3 months and the second at 6 months. All subjects were subjected to the same protocol, their gait on the treadmill was analyzed and evaluated with an Optogait® analysis system. A univariate analysis was carried out first. Then, a multivariate analysis by adjustment method was carried out in order to eliminate the potential confounding factors. The comparison of the results between the populations in the univariate analysis shows an absence of significant results however there are trends. The statistical results of the multivariate analysis showed interactions in the two subgroups of the operated population.In fact, it turns out that at 3 months there is a tendency to worse gait disorders in subjects with a high BMI reflecting overweight, when an associated surgical procedure has taken place on the meniscus, in subjects over 35 years of age and males. On the other hand, at 6 months, the tendency to worsening is visible only in the strata represented by subjects with a BMI corresponding to overweight, as well as in subjects having benefited from a meniscal suture associated with ACL reconstruction. .The results of the present study show that there are certain factors which tend to increase the risk of these walking disorders after reconstruction of the anterior cruciate ligament by hamstring graft, these factors are different depending on the time postoperative.

Introduction: Anterior cruciate ligament (ACL) tears are a common injury among athletes, including NBA players. Advances in surgical techniques, rehabilitation protocols, and complementary therapies have greatly improved the outcomes for athletes undergoing ACL reconstruction surgery. Arthroscopic surgery has become the standard approach for ACL reconstruction due to its minimally invasive nature, resulting in less pain, faster recovery, and better outcomes. Accelerated rehabilitation protocols have been shown to improve outcomes by getting athletes back to playing sooner and with better functional outcomes than traditional rehabilitation programs. Physiotherapy has also played an important role in helping athletes return to play by using targeted exercises to improve range of motion, strength, and stability. Complementary therapies, such as phytotherapy, have also shown promise in aiding the healing process. These advancements in ACL tear treatment have the potential to improve outcomes for NBA players who suffer from these injuries and further research can help continue to improve prevention and management of these injuries. Methods: The study is a retrospective cohort study that focuses on NBA players who suffered from ACL tears and underwent reconstructive surgery between 2012 and 2022. The study excluded players who had not played prior to experiencing an ACL injury, players with a concurrent significant knee injury involving other ligaments, any other major leg injury, or a history of ACL tear in the contralateral knee. The study gathered data on 25 players and recorded game statistics for each player before and after surgery to assess the impact of ACL tears on players' game performance. The recorded data was analyzed using SPSS Statistics.Results: The mean age at injury was 26.12 ± 4.3 years, and the majority of injuries occurred on the left side. players experienced significant decreases in minutes per game and points per game, with a reduction of 5.9 and 3.5, respectively, during the season following the injury. Moreover, players exhibited a statistically significant decline in rebounds per game and assists per game, with a decrease of 0.91 and 1.11, respectively. These findings suggest that ACL injuries can have a severe impact on a player's ability to contribute to their team's success. The study did not find a significant difference in shooting percentages for two-pointers, three-pointers, and free throws before and after ACL injury. This suggests that ACL injuries do not significantly affect a player's shooting abilities. Discussion: This study focused on the incidence and impact of ACL injuries among NBA players between 2012 and 2022. The study found that ACL injuries had a significant negative impact on a player's performance, including decreases in minutes, points, rebounds, and assists per game. The mean time to return to play after ACL surgery was consistent with previous studies. The study also highlighted the importance of effective prevention, treatment, and rehabilitation strategies, with neuromuscular training programs showing promise in reducing the incidence of ACL injuries. While ACL injuries did not significantly affect shooting percentages, further research is needed to fully understand their impact on shooting performance. Conclusion: The study sheds light on the frequency and effects of ACL injuries in NBA players and emphasizes the importance of implementing effective strategies for preventing, diagnosing, and treating such injuries in order to help players recover and return to their previous level of performance.

The purpose of this study was to evaluate the morpho-functional change of the patellar ligament in dogs affected by cranial cruciate ligament rupture. The hypothesis is that it may show increased thickening and stiffness with increasing days from trauma to diagnosis. Understanding this aspect have implications on the choice of timing to treat patients suffering from cranial cruciate ligament rupture, and also in the contextualization of patellar ligament desmitis pictures after surgical treatment with tibial plateau levelling osteotomy or tibial tuberosity advanced. Thirty-three dogs were affected affected by unilateral cranial cruciate rupture were examined and divided into three groups based on the time elapsed from the onset of lameness to diagnosis: Group 1 (from 1 to 15 days), Group 2 (from 16 to 60 days), Group 3 (over 60 days). Conventional B-mode ultrasonographic and elastosonographic examinations of patellar ligament were performed without sedation for each dog. At the ultrasonographic examination, all dogs showed alterations in the echostructure of the patellar ligament. In addition, the patellar ligament tended to become harder and less soft with increasing days after rupture, although there were not significant differences between groups. Our results showed that as time increases between the onset of cranial cruciate ligament rupture and diagnosis and treatment, the patellar ligament progressively thickens and loses its elasticity.

The anterior cruciate ligament (ACL) injury is the most serious injury in judo. Therefore, its prevention is of great importance. The main mechanism of injury is the collapse of the knee in valgus, which usually occurs when there are deficits of strength and neuromuscular control of the core, external rotators and hip abductors, as well as limitations of ankle and hip mobility. In most sports there is a difference in the prevalence of this injury between both sexes, being more common in women. Therefore, in the present study we observed this possible intersexual disparity in the difference of movement patterns among elite judokas according to their sex, in order to identify those athletes with a higher risk of ACL injury. In addition, it was not observed differences between sexes in the performance of the Single Leg Squat test (SLS test); There was worse neuromuscular control of the non-dominant leg in men and women; No differences were observed in in the range of motion of ankle dorsiflexion and hip external rotation between men and women, but there were differences in internal rotation, a movement whose restriction may be related to an increased risk of ACL injury.

Rehabilitation following anterior cruciate ligament reconstruction with hamstring graft allows the patient to regain his functional capacities and to support him in the resumption of sports activities. Rehabilitation also aims to minimize the risk of recurrence, which is why it ensures that the patient's muscular capacities develop properly until they return to sport. Isokinetics helps strengthen and assess the strength of muscle groups in the thigh, but controversy exists as to its use by resistance to the open kinetic chain knee extension that would cause the transplant to distend. The objective of this study is to determine the influence of isokinetic muscle strengthening on the possible laxity of the anterior cruciate ligament and to be able to determine risk factors. The study relates to a population having benefited from anterior cruciate ligament reconstruction with hamstring graft from 3 to 6 months after surgery. Two groups are differentiated, one group exposed to isokinetism during rehabilitation, the other group, named unexposed, undergoes rehabilitation without the use of isokinetism. An anterior knee laxity test is performed 6 months postoperatively using the GNRB® machine for all subjects according to the same protocol. The test results were statistically analyzed to determine a relative risk of transplant distension for each group in the study. Comparison of the results of each group by univariate analysis did not reveal any significant result. Multivariate analysis showed interactions in the two strata of the study. It was argued that the use of isokinetics seems to have no effect on the risk of developing distension for the majority of subjects in the exposed group. A tendency towards transplant protection was perceived for each variable except the age under 25 years (RRa = 1.07). The use of isokinetics does not appear to be a cause of transplant distension in patients undergoing an anterior cruciate ligament reconstruction when this method is introduced 3 months postoperatively.

Ankle sprains are exceedingly common injuries in both athletes and general population. They account for 10 to 30% of all sports injuries. Although the vast majority of lateral ankle ligamentous injuries respond successfully to conservative management, the absolute number of those that progress to chronic lateral ankle instability (CLAI) remains considerably important. This condition is characterized by persistent symptoms and may be associated with short-term and long-term complications and functional deficits. There is still a lack of ideal postoperative management of CLAI patients. Furthermore, an evidence-based rehabilitation phasing does not exist and most of the published studies regarding this subject suggest some protocols based on a wide variety of functional assessment scores and other modalities which are not accurate enough. Moreover, the literature that assesses the ability to return to work (RTW) and return to sport (RTS) in general population and athletes operated for CLAI shows most commonly aggregated results with global rates of RTW or RTS without describing a detailed timeline based on the readiness of patients to return to each level of activity. Although stress radiographs and MRI have been assessed as potential tools to improve postoperative management of CLAI patients, the first modality is limited by its low sensitivity to detect laxity and the second one by its static character and its inability to predict the healing process phase nor the mechanical properties of the repaired/reconstructed ligaments. Bioelectrical impedance, mechanical impedance and near-infrared spectroscopy are non-invasive methods of measurement that could be potential assessment tools to help surgeons improve the postoperative management of patients after CLAI surgery.

The mechanisms underlying the establishment of asymmetric structures during development remain elusive. The wing of Drosophila is asymmetric along the Anterior-Posterior (AP) axis, despite that its growth signals that drive its growth are presumably symmetric. Here, we investigated the contribution of cell recruitment, a process that drives wing fate differentiation in Drosophila, to the asymmetric shape and pattern of the adult wing. Genetic impairment of cell recruitment results in a significant reduction in adult wing asymmetry, primarily affecting the region between longitudinal vein 5 and the wing margin (L5-M). Morphometric analysis reveals that the lack of cell recruitment results in a more symmetric wing with respect to the AP, suggesting a contribution of cell recruitment to the establishment of asymmetry in the adult wing. A close examination of the expression of the wing selector gene vestigial (vg) in wing disc does not support this hypothesis. However, the circularity of the Vg pattern significantly increase in recruitment-impaired wing disc, suggesting that while the decrease of the L5-M region in the adult wing may not be attributed to cell recruitment, it could contribute to the overall asymmetry of the adult wing. We conclude that cell recruitment, a widespread mechanism that participates in growth and patterning of several developing systems, could drive, at least partially, the asymmetric shape of the Drosophila wing.

There is increasing evidence that some adult mitral valve pathologies may have developmental origins involving errors in cell signaling and protein deposition during valvulogenesis. While early and late gestational stages are well-documented in zebrafish and small mammalian models, longitudinal studies in large mammals with a similar gestational period to humans are lacking. Further, the mechanism of chordae tendineae formation and multiplication remains unclear. This current study presents a comprehensive examination of mitral anterior leaflet and chordae tendineae development in a bovine model (with a gestational period of 9 months). Remarkably distinct from small mammals, bovine development displayed early branched chordae, with increasing attachments only until birth, while the anterior leaflet grew both during gestation and postnatally. Chordae also exhibited accelerated collagen deposition, maturation, and crimp development during gestation. These findings suggest that the bovine anterior leaflet and chordae tendineae possess unique compartmentalized processes of development despite being a continuous collagenous structure.

Urinary tract diseases are common in cats, and often require surgical reconstruction. Here, to explore the possibility of urinary tract reconstruction in cats using in-vivo tissue architecture (iBTA), biosheets fabricated using iBTA technology were implanted into the feline bladder and the regeneration process was histologically evaluated. The biosheets were prepared by embedding molds into the dorsal subcutaneous pouches of six cats for 2 months. A section of the bladder wall was removed, and the biosheets were sutured to the excision site. After 1 and 3 months of implantation, the biosheets were harvested and evaluated histologically. Implantable biosheets were formed with a success rate of 67%. There were no major complications following implantation, including tissue rejection, severe inflammation, or infection. Urinary incontinence was also not observed. Histological evaluation revealed the bladder lumen was almost entirely covered by urothelium after 1 month, with myofibroblast infiltration into the biosheets. After 3 months, the urothelium became multilayered, and mature myocytes and nerve fibers were observed at the implantation site. In conclusion, this study showed that tissue reconstruction using iBTA can be applied to cats, and that biosheets have the potential to be useful in both the structural and functional regeneration of the feline urinary tract.

Structural health monitoring has been studied by a number of researchers as well as various industries to keep up with the increasing demand for preventive maintenance routines. This work presents a novel method for reconstruct prompt, informed strain/stress responses at the hot spots of the structures based on strain measurements at remote locations. The structural responses measured from usage monitoring system at available locations are decomposed into modal responses using empirical mode decomposition. Transformation equations based on finite element modeling are derived to extrapolate the modal responses from the measured locations to critical locations where direct sensor measurements are not available. Then, two numerical examples (a two-span beam and a 19956-degree of freedom simplified airfoil) are used to demonstrate the overall reconstruction method. Finally, the present work investigates the effectiveness and accuracy of the method through a set of experiments conducted on an aluminium alloy cantilever beam commonly used in air vehicle and spacecraft. The experiments collect the vibration strain signals of the beam via optical fiber sensors. Reconstruction results are compared with theoretical solutions and a detailed error analysis is also provided.

DIEP-based breast reconstruction necessitates wide undermining at the abdominal donor-site, creating large wound areas. Flap harvesting is usually conducted using electrosurgical dissection devices. This study sought to compare the clinical outcomes in patients after using the PEAK PlasmaBlade (PPB) versus monopolar electrocautery (MPE). This retrospective cohort study included 128 patients with DIEP-based breast reconstruction. Patient characteristics as well as information on the postoperative course were collected and a comparative evaluation was conducted. The MPE group exhibited significantly (p* = 0.0324) higher abdominal drainage volume (351.11 ± 185.96 ml) compared to the PPB group (279.38 ± 183.38 ml). Subgroup analysis demonstrated that PPB significantly reduced postoperative wound fluid in patients with BMI > 30 kg/m² (p* = 0.0284), without prior neoadjuvant chemotherapy (p** = 0.0041), and among non-smokers (p = 0.0046). Furthermore, postoperative pain was significantly (p**** < 0.0001) lower in the PPB cohort. This study confirms the non-inferiority of the PEAK PlasmaBlade to conventional electrocautery for abdominal flap harvesting. The PPB demonstrated advantages, notably reduced drainage volume and lower postoperative pain levels. Recognizing patient subsets that benefit more from the PPB highlights the importance of personalized device selection based on patient characteristics.

Introduction: Anterior cervical discectomy and fusion (ACDF) for cervical disc herniation (CDH) is commonly performed. Specific postoperative complications include dysphagia, dysphonia, cervicalgia, adjacent segment disorder, cage subsidence, and infections. However, interscapular pain is commonly reported by these patients after surgery, although its mechanisms have been not clarified yet. Methods: This retrospective series of 31 patients undergoing ACDF for CDH at a single Academic Hospital. Baseline and postoperative clinical, radiological, and surgical data were analyzed. The linear regression analysis was conducted to identify any factor independently influencing the occurrence rate of postoperative interscapular pain. Results: The mean age was 57.6±10.8 years, and the M:F ratio was 2.1. The preoperative mean VAS-arm was 7.15±0.81 among the 20 patients reporting brachialgia, and the mean VAS-neck was 4.36±1.43 among those 9 patients reporting cervicalgia. At 1 month interscapular pain was still reported by 8 out of the 17 patients who experienced it postoperatively, and it was recovered in all patients after 2 months. The regression analysis showed how the interscapular pain was not directly associated to age(p=0,74), gender(p=0,46), smoking status(p=0,44), diabetes(0,42), preoperative brachialgia(p=0,21) or cervicalgia(p=0,48), symptoms duration(p=0,13), baseline VAS-arm(p=0,11), VAS-neck(p=0,93), or mJOA(p=0,63) scores, or disc height modification(p=0,90). However, the postoperative increase of the mean zygapophyseal joint rims distance was identified as an independent factor in determining interscapular pain (p=0,02). Conclusions: Our study revealed that the onset of interscapular pain following ACDF may be determined by over-distraction of the zygapophyseal joints rim. Then, proper sizing of prosthetic implants could reduce this painful complication.

The forehead and temporal region are a frequent area of skin cancer development. After tumor removal, reconstruction must be performed maintaining the frontal-temporal line of the scalp and the symmetry of the eyebrows, trying to hide the scars in these marks or in natural folds and wrinkles. Second wound healing and skin grafts generally do not produce an acceptable cosmetic result. When direct closure is not possible, the technique of choice is skin flaps. In the midfrontal line, continuation of the glabella, there is a remnant of skin to be used as a donor area for local flaps; similarly, it occurs in the preauricular cheek, which can move towards the temple. In addition to the classic advancement and rotation flaps, the frontalis myocutaneous transposition flap is an excellent technique for closing defects which are wider than higher on the forehead. Its design is very versatile and can be done between the two pupil lines at different heights depending on the location of the defect. On the other hand, the preauricular skin advancement flap with an infralobular Burow's triangle is also an excellent option for reconstructing tumors in the temporal area.

The purpose of this study was to describe ocular surface and anterior eye segment findings in various types of ichthyoses. Methods: This was a single-center prospective observational study. The study group consisted of five patients (P1-P5) aged 13–66 years. Multimodal imaging was performed, including slit-lamp examination, swept-source optical coherence tomography (SS-OCT), and in vivo confocal microscopy (IVCM). Results: All patients were diagnosed with moderate to severe dry eye disease (DED). Corneas showed a significant pattern of irregularity, with a significant difference between the corneal thickness at the apex (CAT) and corneal thinnest thickness (CTT), ranging from 5 to 375 µm. Three patients were diagnosed with ectasia patterns based on SS-OCT. All patients showed abnormalities in at least one Fourier index parameter for at least one eye at 3 or 6 mm, on keratometric, anterior, or posterior analyses. IVCM examination revealed changes in all corneal layers. Conclusions: By combining the results of multimodal im-aging, we were able to detect preclinical abnormalities, distinguish characteristic changes com-mon to ichthyosis, and reveal the depth and characteristics of corneal abnormalities. Therefore, patients with ichthyosis should be examined for DED and ectatic disorders early in clinical prac-tice.

Hox genes represent an important gene family that is involved in the segmentation pattern and identity of the segments during the formation of the body plan in metazoans. For many years, several studies have sought to establish a correlation between the evolution of these genes and the evolution of large groups of metazoans. Here, we use publicly available sequences of Hox gene clusters to reconstruct the evolutionary history of anterior Hox genes. We show that information harbored by these genes, in part, reflects the evolution and diversification of most animal archetypes, but in many cases, there were conflicts between the evolutionary history of some genes and the history of large groups, these cases may have occurred due to specific and similar selective pressures in relatively distant groups, which may have led to evolutionary convergences. Our findings also reveal that the evolution of Hox genes (and clusters) as a multigene family is consistent to a birth-and-death model constrained by development, where there is a trade-off between a relatively fast gene turnover and their central developmental roles

The periodontal ligament (PDL) is a complex connective tissue that connects the tooth root to the dental alveolar bone and plays crucial mechanical roles. PDL also exhibits regenerative roles and regulatory functions to maintain per-iodontium integrity and homeostasis. While PDL exposure to oral microbial pathogens is common, virtually nothing is known regarding viral infections of PDL. In particular, human herpes simplex virus type 1 (HSV-1) persistently infects the oral cavity through infections of the oral epithelium, connective tis-sue and neurons. While the oral spread of HSV-1 is generally asymptomatic, this virus has also been implicated in various oral pathologies. In this study, using a primary cell model derived from PDL (PDL-cells), and whole surgical fragments of PDL, we provide evidence supporting the efficient infection of PDL by HSV-1 and the promotions of cytopathic effects. Infection of PDL by HSV-1 was also associated with an acute innate inflammatory response, as il-lustrated by the production of the antiviral interferons and pro-inflammatory cytokines. Furthermore, this inflammatory response to HSV-1 was exacerbated in the presence of bacterial-derived products, such as peptidoglycans. This work therefore highlights the ability of HSV-1 to infect mesenchymal cells from PDL, suggesting that PDL may serve as a viral reservoir for the perio-dontal spread of HSV-1. Moreover, this raises questions about HSV-1 oral pathogenesis, as HSV-1-associated cytopathic and inflammatory effects may contribute to profound alterations of PDL integrity and functioning.

As an uncommon cause of spinal cord infarction, anterior spinal cord syndrome can manifest with motor paralysis, loss of pain, and temperature sensation distal to the site of the lesion. The main pathogenesis of this syndrome is the disruption of blood flow in the anterior spinal artery. Mortality and morbidity differ with the etiology of the syndrome. So knowing the etiology of blood flow disruption is essential for patient management. This review article highlights the important clinical manifestation of Anterior spinal artery syndrome. Also describes etiology, pathogenesis, diagnosis, prognosis, possible management, and complications.

Glaucoma is a blinding disease largely caused by increased resistance to drainage of fluid from the eye’s anterior chamber, resulting in elevated intraocular pressure (IOP). A major site of fluid outflow regulation and pathology is the trabecular meshwork (TM) at the entrance of the eye’s drainage system. We aimed to characterize the structural and functional properties of a newly developed tissue-engineered anterior segment eye culture model. We hypothesized that repopulation of a decellularized TM with non-native TM cells could restore aspects of normal TM. The decellularization protocol removed all cells and debris while preserving the ECM. Seeded cells localized to the TM region and progressively infiltrated the meshwork ECM. Cells reached a distribution comparable to control TM after four days of perfusion culture. After a perfusion rate increase challenge, tissue-engineered cultures reestablished normal IOPs (reseeded = 13.7±0.4 mmHg, decellularized = 35.2±2.2 mmHg, p < 0.0001). eGFP expressing CrFK control cells caused a high and unstable IOP (27.0±6.2 mmHg). In conclusion, we describe a readily available, storable, and biocompatible scaffold for anterior segment perfusion culture of non-native cells. Tissue-engineered organs demonstrated similarities to native tissues and may reduce the need for scarce donor globes in outflow research.

Background: Osteoclastic bone resorption in the compression zone of periodontal ligament (PDL) plays a role in orthodontic tooth movement, and is regulated by the balance of RANKL and OPG. Compression downregulates OPG, conversely, tension upregulates OPG in PDL cells. However, the regulatory mechanism of OPG expression in PDL cells under different mechanical stresses remains unclear. Methods: To study microRNA (miRNA) expression profiles, compression (2g/cm²) or tension (15%-elongation) was applied to immortalized human PDL (HPL) cells, and miRNA was extracted. The miRNA expression was analyzed using a human miRNA microarray, and the changes of the miRNA expression were confirmed by real-time RT-PCR. In addition, miR-3198-mimic and -inhibitor were transfected into HPL cells to understand the resulting OPG expression and production. Results: Certain miRNAs were expressed differentially under compression and tension. Some miRNAs including miR-3198 were upregulated only by compression. Real-time RT-PCR confirmed that compression induced miR-3198, but tension reduced it, in HPL cells. miR-3198-inhibitor upregulated and miR-3198-mimic reduced OPG in HPL cells. miR-3198-inhibitor rescued the compression-mediated downregulation of OPG. On the other hand, miR-3198-mimic reduced OPG expression under tension. Conclusion: We conclude that miR-3198 is upregulated by compression and is downregulated by tension, suggesting that miR-3198 downregulates OPG in response to mechanical stress.

The present study aimed to analyze novel mechanisms underlying Nrf2-mediated anti-apoptosis in periodontal ligament stem cells (PDLSCs) in the periodontitis oxidative microenvironment. We created an oxidative stress model with H2O2-treated PDLSCs. Herein, we used real-time PCR, western blotting, TUNEL staining, fluorogenic assay and transfer genetics to confirm the degree of oxidative stress and apoptosis as well as the Nrf2 function. Surprisingly, we demonstrated that with up-regulated ROS and MDA levels, the effect of oxidative stress was obvious under H2O2 treatment. Anti-oxidative molecules were changed after the H2O2 exposure, whereby the anti-oxidative signaling of Nrf2 was activated with the increase of its downstream effectors, HO-1, NQO1 and γ-GCS. Additionally, the apoptosis levels gradually increased with oxidative stress and changes in the caspase-9, caspase-3, Bax and c-Fos levels, but not with caspase-8 and down-regulated Bcl-2. The enhanced antioxidant effect could not resist the occurrence of apoptosis. Furthermore, Nrf2 overexpression effectively improved the anti-oxidative levels and increased cell proliferation. At the same time, overexpression effectively restrained TUNEL staining and decreased the molecular levels of caspase-9, caspase-3, et al, but not that of caspase-8. By contrast, silencing the expression Nrf2 levels had the opposite effect. Collectively, Nrf2 alleviates PDLSCs via its effects on anti-oxidative and anti-intrinsic apoptosis by the activation of anti-oxidative enzymes.

Angiotensin II (Ang II) plays a role in several inflammatory diseases and is capable of inducing the release of inflammatory mediators in several cell types. The objective was to investigate the potential of Ang II to induce mRNA expression of inflammatory mediators by cultured primary human periodontal cells. A synergistic effect of a co-treatment with Ang II and IL1β on mRNA expression of inflammatory mediators was also explored. Primary cultures of human fibroblast-like cells isolated from gingival and periodontal ligament tissues from 3 subjects were established using explant techniques. Immunophenotyping of STRO-1, Ang II type 1 receptor (AT1R) and Ang II type 2 receptor (AT2R) was performed by flow cytometry analysis. Cell cultures were challenged with Ang II (1M) for 3, 6 and 24h with or without a co-treatment with IL1β (0.1ng/mL) for 24h. mRNA expression of inflammatory mediators was performed by real time quantitative polymerase chain reaction (RT-qPCR). We present, for the first time, a precise quantification for AT1R and AT2R on human gingival and periodontal fibroblast-like cell types; the percentage of positive immunostaining compared to the total population of cells varied from 3.35% through 5.29% for AT1R and 2.97% through 4.57% for AT2R. Ang II slightly upregulated mRNA expression of IL6 and CCL2/MCP1 in gingival cells and IL8 and PTGS2/COX2 in periodontal ligament cells. IL1β induced upregulation of IL8, IL6 CCL2/MCP1, PTGS2/COX2 and IL1β mRNA in both cell types. Co-treatment with Ang II and IL1β did not show a synergistic effect under these experimental conditions. Ang II shows a low potential to induce mRNA upregulation of inflammatory mediators in cultured primary human gingival and periodontal ligament cells, most likely due to the low percentage of Ang II receptors in such cells, and no synergistic effect with the co-treatment with IL1β.

Angiotensin II (Ang II) plays a role in several inflammatory diseases and is capable of inducing the release of inflammatory mediators in several cell types. The objective was to investigate the potential of Ang II to induce mRNA expression of inflammatory mediators by cultured primary human periodontal cells. A synergistic effect of a co-treatment with Ang II and IL1β on mRNA expression of inflammatory mediators was also explored. Primary cultures of human fibroblast-like cells isolated from gingival and periodontal ligament tissues from 3 subjects were established using explant techniques. Immunophenotyping of STRO-1, AT1 and AT2 receptors was performed by flow cytometry analysis. Cell cultures were challenged with Ang II (1M) for 3, 6 and 24h with or without a co-treatment with IL1β (0.1ng/mL) for 24h. mRNA expression of inflammatory mediators was performed by real time quantitative polymerase chain reaction (RT-qPCR). We present, for the first time, a precise quantification for AT1 and AT2 receptors on human gingival and periodontal fibroblast-like cell types; the percentage of positive immunostaining compared to the total population of cells varied from 3.35% through 5.29% for AT1 and 2.97% through 4.57% for AT2. Ang II slightly upregulated mRNA expression of IL6 and CCL2/MCP1 in gingival cells and IL8 and PTGS2/COX2 in periodontal ligament cells. IL1β induced upregulation of IL8, IL6 CCL2/MCP1, PTGS2/COX2 and IL1β mRNA in both cell types. Co-treatment with Ang II and IL1β did not show a synergistic effect under these experimental conditions. Ang II shows a low potential to induce mRNA upregulation of inflammatory mediators in cultured primary human gingival and periodontal ligament cells, most likely due to the low percentage of Ang II receptors in such cells, and no synergistic effect with the co-treatment with IL1β.

The aim of the study was to assess the relationship between the shape of the anterior-posterior curvature of the spine and body composition in school-children. The study included 257 children, aged 11-12. Correct spinal curvature was established in 106 (41.08%) subjects. Other types included: decreased kyphosis and correct lordosis - 40 participants (15.50%), correct kyphosis and decreased lordosis - 24 individuals (9.30%), increased kyphosis and correct lordosis - 17 subjects (6.59%), correct kyphosis and increased lordosis - 22 children (8.53%), decreased kyphosis and decreased lordosis - 32 people (12.40%), decreased kyphosis and increased lordosis - 4 of the examined subjects (1.55%), increased kyphosis and lordosis - 13 people (5.04%). In addition, 134 (51.94%) demonstrated scoliotic posture and 8 (3.10%) scoliosis. There were significant relationships between the shape of the anterior-posterior curvatures and body composition in school-children. Those with a strong body build (predominance of mesomorphs) were generally characterised by the correct formation of these curvatures. In contrast, lean people (with the predominance of ectomorphic factors) were more likely to experience abnormalities. No correlations with body composition were observed in the group with scoliotic posture or scoliosis.

The goal of background reconstruction is to recover the background image of a scene from a sequence of frames showing this scene cluttered by various moving objects. This task is fundamental in image analysis, and is generally the first step before more advanced processing, but difficult because there is no formal definition of what should be considered as background or foreground and the results may be severely impacted by various challenges such as illumination changes, intermittent object motions, highly cluttered scenes, etc. We propose in this paper a new iterative algorithm for background reconstruction, where the current estimate of the background is used to guess which image pixels are background pixels and a new background estimation is performed using those pixels only. We then show that the proposed algorithm, which uses stochastic gradient descent for improved regularization, is more accurate than the state of the art on the challenging SBMnet dataset, especially for short videos with low frame rates, and is also fast, reaching an average of 52 fps on this dataset when parameterized for maximal accuracy using GPU acceleration and a Python implementation.

With the rapid development of smart phones, tablets and their operative systems, many positioning enabled sensors have been built into these devices. Users can now accurately fix their location according to the function of GPS receivers. For indoor environments, as in the case we are studying, WiFi based positioning is preferred to GPS due to the attenuation or obstruction of signals. This paper deals with the automatic classification of customers in a Sports Shop Center on the basis of their movements around the shop's premises. To achieve this goal, we start by collecting (x,y) coordinates from customers while they visit the store. Consequently, any costumer's path through the shop is formed by a list of coordinates, obtained with a frequency of one measurement per minute. Then, a guess about the full trajectory is constructed and a number of parameters about these trajectories is calculated before performing an Unsupervised Learning Clustering Process. As a result, we can identify several types of customers, and the dynamics of their behavior inside the shop. This information is of great value to the company, to be used both in the long term and also in short periods of time, monitoring the current state of the shop at any moment, identifying different types of situation appearing during restricted periods, or predicting customer flow conditions

This study aimed to clarify the relationship between the joint and ligament structures of the subtalar joint and degeneration of the subtalar articular facet. We examined 50 feet from 25 Japanese cadavers. The number of articular facets, joint congruence, and intersecting angle were measured for the joint structure of the subtalar joint, and the footprint areas of the ligament attachments of the cervical ligament, interosseous talocalcaneal ligament (ITCL), and anterior capsular ligament were measured for the ligament structure. Also, subtalar joint facets were classified into Degeneration (+) and (-) groups according to degeneration of the talus and calcaneus. No significant relationship was identified between the joint structure of the subtalar joint and degeneration of the subtalar articular facet. In contrast, footprint area of the ITCL was significantly higher in the Degeneration (+) group than in the Degeneration (-) group for the subtalar joint facet. These results suggest that the joint structure of the subtalar joint may not affect degeneration of the subtalar articular facet. Degeneration of the subtalar articular facet may be related to the size of the ITCL.

Background. To describe the characteristics of anterior mediastinal masses on conventional magnetic resonance imaging (MRI) and to assess the role of the Apparent Diffusion Coefficient (ADC) value in distinguishing benign from malignant mediastinal lesions. Methods. We conducted a retrospective cross-sectional study on 55 patients with anterior mediastinal mass who performed MRI before treatment. Biopsy and histopathological assessments were done after that. A radiologist evaluates the changes of signal intensity on these sequences: T1- weighted VIBE DIXON pre and post-contrast with Gadolinium, T2 HASTE, T2 TIRM, DWI/ADC, to determine the size, margin of the lesion, the presence of fat, cystic in it. ADCs values were calculated from the ADC maps which were constructed from b = 0 and b = 2000 Results. The study was composed of 55 patients, with 5 benign lesions and 50 malignant lesions. The ADCmean, ADCmedian, ADC10, and ADC90 in the histogram-based approach and hot-spot-ROI-based mean ADC for the malignant lesions was significantly lower than those found in benign lesions (P-value <0.05). The hot-spot-ROI-based mean ADC had the highest value in differentiation between benign and malignant mediastinal lesions, between group A (benign lesions, thymoma A, AB, B1) and group B (thymoma B2, B3 and other malignant lesions). The cut-off point of the ADC value differentiating malignant from benign mediastinal lesions was 1,17x10-3mm2/s with sensitivity of 80%, and specificity of 80%. The cut off point of the ADC value differentiating group A from group B was 0.99 x10-3mm2/s with sensitivity of 78,4%, and specificity of 88.9%. The cut-off point of the ADC value differentiating lymphoma from other malignant lesions was 0,91 x10-3mm2/s with sensitivity of 100%, and specificity of 60.5%. Conclusion. Diffusion-weighted MRI and measurement of ADC value in histogram-based approach and hot-spot-ROI-based mean ADC are very helpful in the differentiation between benign and malignant anterior mediastinal lesions.

Introduction: Novel robotic surgery systems (da Vinci Xi) are superior to classical open and laparoscopic techniques with its clear and three-dimensional view. We aimed to present the first case low anterior resection of rectal cancer and vaginal specimen extraction with Da Vinci Xi.Case: A 75-year-old female patient with rectum adenocarcinoma was undergone robotic-assisted low anterior resection (LAR) of the rectum, vaginal removal of the specimen, colorectal anastomosis and loop ileostomy. The operation time was 190 minutes. There were no postoperative complications. Pathological tumor stage was stage pT1N0 with negative proximal, distal and radial resection margins. The patient was discharged on the third postoperative day.Conclusion: Robot-assisted LAR, total mesorectal excision, vaginal removal of the specimen, colorectal anastomosis, and loop ileostomy can be performed easily and safely with Da Vinci Xi at early stage rectal cancer. And the vaginal extraction of the specimen avoids us from a traditional abdominal incision.

Periapical diseases are a frequent evolution of pulp necrosis. They appear without any painful episode. The incidence splits between 6% and 55%. Initially we can treat inflammatory periapical injury by conservative approach and studies reported 85% of success rate after endodontic disin-fection. Several techniques can be described in the nonsurgical management of peri-radicular le-sions: the root canal treatment, decompression procedure, decompression technique, calcium hydroxide, Apexum procedure. Unfortunately, periapical lesion recuperating is an unpredictable procedure. In some cases surgical approach is preffered to manage large periradicular wound including periapical cysts and abscess. periodic examination is primordial to evaluate efficacy of the therapy. In this report we describe an inflammatory radicular cyst of the anterior maxilla with which was successfully treated by conventional root canal retreatment and endodontic surgery

A class of models for non-Gaussian spatial random fields is explored for spatial field reconstruction in environmental and sensor network monitoring. The family of models explored utilises a class of transformation functions known as the Tukey g-and-h transformations to create a family of warped spatial Gaussian process models which can support various desirable features such as flexible marginal distributions, which can be skewed, leptokurtic and/or heavy-tailed. The resulting model is widely applicable in a range of spatial field reconstruction applications. To utilise the model in applications in practice, it is important to carefully characterise the statistical properties of the Tukey g-and-h random fields. In this work, we both study the properties of the resulting warped Gaussian processes as well as using the characterising statistical properties of the warped processes to obtain flexible spatial field reconstructions. In this regard, we derive five different estimators for various important quantities often considered in spatial field reconstruction problems. These include the multi-point Minimum Mean Squared Error (MMSE) estimators; the multiple point Maximum A-Posteriori (MAP) estimators; an efficient class of multiple-point linear estimators based on the Spatial-Best Linear Unbiased (S-BLUE) estimators; and two multi-point threshold exceedance based estimators, namely the Spatial Regional and Level Exceedance estimators. Simulation results and real data examples show the benefits of using the Tukey g-and-h transformation as opposed to standard Gaussian spatial random fields in a real data application for environmental monitoring.

The purpose of this study was to clarify the attachment types of the tibialis anterior tendon (TAT) in Japanese fixed cadavers and to determine the attachment site area in three dimensions. We examined 100 feet from 50 Japanese cadavers. The TAT was classified according to differences in the number of fiber bundles as: Type I, with one fiber bundle; Type II, with two fiber bundles; and Type III, with three fiber bundles. The attachment site area of the TAT was measured using a three-dimensional scanner. Cases were Type II in 95% and Type III in 5%, with no cases of Type I identified. In Type II, mean attachment site areas were 85.2 ± 18.2 mm2 for the medial cuneiform bone (MCB) and 72.4 ± 19.0 mm2 for the first metatarsal bone (1MB), showing a significantly larger area for MCB than for 1MB. These findings suggest the possibility of ethnic differences in TAT attachment types and suggest that TAT attachments in Japanese individuals are highly likely to be Type II, with rare cases of Type III. Accurate measurement of attachment site areas is possible with appropriate three-dimensional measurements.

Anterior segment dysgenesis (ASD) encompasses a wide spectrum of developmental abnormalities of the anterior ocular segment, including congenital cataract, iris hypoplasia, aniridia, iridocorneal synechiae, as well as Peters, Axenfeld, and Rieger anomalies. Here, we report a large five-generation Caucasian family exhibiting atypical syndromic ASD segregating with a novel truncating variant of FOXC1. The family history is consistent with highly variable autosomal dominant symptoms including isolated glaucoma, iris hypoplasia, aniridia, cataract, hypothyroidism, congenital heart anomalies, and cystic kidney disease. Whole exome sequencing revealed a novel variant [c.313_314insA; p.(Tyr105*)] in FOXC1 that disrupts the alpha-helical region of the DNA-binding forkhead box domain. In vitro studies using a heterologous cell system revealed aberrant cytoplasmic localization of FOXC1 harboring the Tyr105* variant, likely precluding downstream transcription function. Meta-analysis of the literature highlighted the intrafamilial variability related to FOXC1 truncating alleles. This study highlights the clinical variability in ASD and signifies the importance of combining both clinical and molecular analysis approaches to establish a complete diagnosis.

Periodontal ligament fibroblasts (PdLFs) exert important functions in oral tissue and bone remodeling following mechanical forces, which are specifically applied during orthodontic tooth movement (OTM). Located between the teeth and the alveolar bone, mechanical stress activates the mechanomodulatory functions of PdLFs including the regulation of local inflammation and activation of further bone-remodeling cells. Previous studies suggested the growth differentiation factor 15 (GDF15) as important pro-inflammatory regulator during the PdLFs mechanoresponse. However, the precise mechanism remains to be clarified, as GDF15 may act both intracrine and by receptor binding, potentially also in an autocrine manner. The extent to which PdLFs are susceptible to extracellular GDF15 has not yet been investigated. Thus, our study aims to examine the influence of GDF15 exposure on cellular properties of PdLFs and their mechanoresponse, which seems particularly relevant regarding disease- and aging-associated elevated GDF15 serum levels. Therefore, in addition to investigating potential GDF15 receptors, we analyzed its impact on proliferation, survival, senescence, and differentiation of human PdLFs, demonstrating a pro-osteogenic effect upon long-term stimulation. Furthermore, we detected an altered force-related inflammation and impaired osteoclast differentiation. Overall, our data suggest a major impact of extracellular GDF15 on PdLFs differentiation and their mechanoresponse.

Input reconstruction problem is usually encountered in the areas such as virtual sensing, image restoration, sensor linearization, and communications. The input reconstruction problem can be seen as an inverse problem. Given a nominal system, two types of approaches are commonly used for solving the inverse problem. The first one is to directly invert the nominal system, and the second one is to derive an inversion of the nominal system in an indirect way. However, for the first type of approaches, system inversion cannot be directly conducted under some conditions such as there exist nonminimum-phase zeros in the nominal system, while for the second type of approaches, simultaneously guaranteeing stability and causality of the obtained inversion is still not solved well. In order to avoid the drawbacks existing in the two types of approaches, an alternative approach is proposed for input reconstruction. In this approach, the input signal is first modeled as the output of a state-space model, afterwards two Kalman filters for the model resulted by combining the input signal model and the nominal system model are implemented alternatively such that the input signal can be sequentially reconstructed in an infinite horizon. The proposed input reconstruction approach is applied in two examples, and simulation results can illustrate the effectiveness of the proposed approach.

As a conceptual model of disease mechanisms, a disease map integrates available knowledge and is applied for data interpretation, predictions and hypothesis generation. It is possible to model disease mechanisms on different levels of granularity and adjust the approach to the goals of a particular project. This rich environment together with requirements for high-quality network reconstruction makes it challenging for new curators and groups to be quickly introduced to the development methods. In this review, we offer a step-by-step guide for developing a disease map within its mainstream pipeline that involves using the CellDesigner tool for creating and editing diagrams and the MINERVA Platform for online visualisation and exploration. We also describe how the Neo4j graph database environment can be used for managing and querying efficiently such a resource. For assessing the interoperability and reproducibility we apply FAIR principles.

A monocular vision pose estimation and identification algorithm used on a small spacecraft for future orbital servicing is studied in this paper. A tracker spacecraft equipped with a short-range vision system is proposed to recover the 3D structural model of a space target in orbit and automatically identify its solar panels and main body using only visual information from an onboard camera. The proposed reconstruction and identification framework is tested using structure-from-motion and point cloud identification methods. The Efficient Perspective-n-Points (EPnP) descriptor is used for pose estimation. Triangulated points are used for component segmentation by means of orientation histogram descriptors. Experimental results based on laboratory images of a spacecraft model show the effectiveness and robustness of our approach.

This article develops algorithms for the characterization and the visualization of micro-scale features by using a small number of sample points, and with a goal to mitigate for the measurement shortcomings which are often destructive or time consuming. We implement the algorithms to rapidly examine the microscopic features of a Microelectromechanical System (MEMS) surface. Such images are highly dense; therefore, traditional image processing techniques might be computationally expensive. The contribution of this research include first, we develop local and global algorithm based on modified Thin Plate Spline (TPS) model to reconstruct high resolution images of the micro-surface’s topography, and its derivatives by using low resolution images. Second, we obtain a bending energy algorithm from our modified TPS model, and use it to filter out image defects. Finally, we develop a computationally efficient Windowing technique, which combines TPS and Linear Sequential Estimation (LSE), to enhance the visualization of images. The Windowing technique allows rapid image reconstruction based on the reduction of inverse problem.

Aim: To investigate the application of anterior and posterior corneal higher order aberrations (HOAs) in detecting keratoconus (KC) and suspect keratoconus (SKC). Method: This is a retrospective, case-control study which evaluated non-ectatic (normal) eyes, SKC eyes, and KC eyes. The Sirius Scheimpfug (CSO, Italy) analyzer was used to measure HOAs of the anterior and posterior corneal surfaces. Sensitivity, specificity and area under receiver operating characteristic curve (AUC) were calculated. Results: Two-hundred and twenty eyes were included in the analysis (normal n = 108, SKC n= 42, KC n= 70). Receiver operating characteristic (ROC) curve analysis revealed a high predictive ability for anterior corneal HOAs parameters: Root mean square (RMS) total corneal HOAs, RMS trefoil and RMS coma to detect keratoconus (AUC > 0.9 for all). RMS Coma (3, ±1) derived from the anterior corneal surface was the parameter with the highest ability to discriminate between suspect keratoconus and normal eyes (AUC = 0.922; cutoff > 0.2). All posterior corneal HOAs parameters were insufficient in discriminating between SKC and normal eyes (AUC < 0.8 for all). In contrast, their ability to detect KC was excellent with AUC of > 0.9 for all except RMS spherical aberrations (AUC = 0.846). Conclusion: Anterior and posterior corneal higher order aberrations can differentiate between keratoconus and normal eyes, with a high level of certainty. In suspect keratoconus disease however, only anterior corneal HOAs, and in particular coma-like aberrations, are of value. Corneal aberrometry may be of value in screening for keratoconus in populations with a high prevalence of the disease.

Abstract: This study aimed to compare the effcacy of robot-assisted and manual cannula insertion in simulated big-bubble deep anterior lamellar keratoplasty (DALK). Novice surgeons with no prior experience in performing DALK were trained to perform the procedure using manual or robot-assisted techniques. The results showed that both methods could generate an airtight tunnel in the porcine cornea, and result in successful generation of a deep stromal demarcation plane representing suffcient depth reached for big-bubble generation in most cases. However, the combination of intraoperative OCT and robotic assistance received a signifcant increase in the depth of achieved detachment in non-perforated cases, comprising a mean of 89% as opposed to 85% of the cornea in manual trials. This research suggests that robot-assisted DALK may offer certain advantages over manual techniques, particularly when used in conjunction with intraoperative OCT.

We present a MATLAB-based, open source reconstruction software for Hybrid Imaging problem arising from Current Density Impedance Imaging (CDII) and Acoustic-Electrical Impedance Tomography (AEIT), utilizing mixed finite element method solver of Darcy toolbox {\tt DarcyLite}~. For a formulation of hybrid inverse problems in impedance tomography the successive substitution iterative schemes are adapted and an reconstruction algorithm is developed. The problem formulation is a class of hybrid imaging modality which is current density impedance imaging or Acoustic-Electrical Impedance Tomography. The proposed algorithm is implemented numerically in two dimensions.

High-quality chromosome-scale haplotype sequences— of diploid genomes, polyploid genomes and metagenomes — provide important insights into genetic variation associated with disease and biodiversity. However, whole-genome short read sequencing does not yield haplotype information that spans whole chromosomes directly. Computational assembly of shorter haplotype fragments is required for haplotype reconstruction, which can be challenging owing to limited fragment lengths and high haplotype and repeat variability across genomes. Recent advancements in long-read and chromosome-scale sequencing technologies, alongside computational innovations, are improving the reconstruction of haplotypes at the level of whole chromosomes. Here, we review recent methodological progress in these areas and discuss perspectives that could enable routine high-quality haplotype reconstruction in clinical and evolutionary studies.

The conceptual reconstruction of Neiwan powerhouse is one of the key activities under the current ongoing mapping project of Taiwanese hydropower plants that mainly took place between 2013 and 2015 and is now focused on micro, pico, and historical power plants. Judging from the fact that the oldest hydropower plant in Taiwan named Guishan starts its operation in 1905, Neiwan powerhouse was among the very first powerhouses that were built across the island to support the electrification of Taiwan. However, the main function of the single turbine equipped Neiwan micro powerhouse was to support mainly the military needs and protect the territories occupied by Japanese troops. Since the powerhouse was built in 1909 and operates only something about 10 year there are very little physical materials or evidence along with contemporaries. Therefore the further reconstruction is based mainly on physical observation of the remains located at the site, old photographs, related articles, treatises and typology of mechanical and civil constructions of other hydropower plant cases in Taiwan hence this paper´s main intention is to pitch a concept reconstruction rather than definite conclusion.

This research paper is part of the wider project concerning the very first detailed mapping of the overall Taiwanese hydro-power plants that took place from 2013 up to 2015 and it is currently in evaluation and finalization stage. The case of Shanping hydro-power plant has been carefully studied, photographed, documented and mapped in situ. It was one of the isolated hydro-power plant projects originally built to supply the remote area with the specific designation. Shanping hydro-power plant, as well as the other units from the early hydro-power generation era in Taiwan, are considered to be the technological heritage of civil and mechanical engineering that reflects later in all the further projects up to nowadays modern Taiwanese hydro-power plants. Unfortunately, most of the hydro-power houses from the older periods were severely damaged or destroyed by natural causes which were also the case of Shanping unit. The research is trying to reconstruct the original location of the powerhouse and its supporting structures based on available historical documents, previous studies, comparative methodology, and the current on-site observation.

This study provides a unique procedure for validating and reconstructing temperature and precipitation data. Although developed from data in Middle Italy, the validation method is intended to be universal, subject to appropriate calibration according to the climate zones analysed. This~research is an attempt to create shared applicative procedures that are most of the time only theorized or included in some software without a clear definition of the methods. The purpose is to detect most types of errors according to the procedures for data validation prescribed by the World Meteorological Organization, defining practical operations for each of the five types of data controls: gross error checking, internal consistency check, tolerance test, temporal consistency, and~spatial consistency. Temperature and~precipitation data over the period 1931--2014 were investigated. The~outcomes of this process have led to the removal of 375 records (0.02%) of temperature data from 40 weather stations and 1286 records (1.67%) of precipitation data from 118 weather stations, and 171 data points reconstructed. In conclusion, this work contributes to the development of standardized methodologies to validate climate data and provides an innovative procedure to reconstruct missing data in the absence of reliable reference time series.

Injuries to the ligaments of the knee are extremely common among athletes who participate in high-risk sports, or any sport that requires frequent cutting motions, jumping, or contact. In order to determine the best way to heal these injuries, it is important to understand not just the pathology of the injury, but also the biomechanical factors that are affected, including stability and steadiness. While many studies have been done to examine the stability of healthy knees, there is little to no existing literature on stability of knees afflicted by injury. In order to surpass this obstacle, static steadiness and dynamic stability data was collected using the Lockhart Monitor phone application and Xsens accelerometers, respectively, both before and after completion of a course of physical therapy in a patient with a grade 2 medial collateral ligament (MCL) tear. These results were then used to determine the degree to which the prescribed physical therapy protocol was effective in healing the MCL, which can be useful for tweaking the individual protocol for future conservative treatment and management of the injury.

The three-dimensional morphology of frictional sub-surfaces holds significant importance for studying tribological issues. However, the uniformity of horizontal datum in 3D scanning is limited for curved surfaces, resulting in the inability to obtain accurate contour characterization parameters from the scanning results. This study aims to address this issue by constructing regular surface equations and normalizing the 3D profiler scanning results. By fitting the data, a "plane" surface representative of the surface features is obtained, and the paper demonstrates this approach on the surface morphology of different worn parts in the frictional area of spherical bearings located in the specific environment of the Three Gorges gate. The results indicate that the obtained "plane" effectively reconstructs the three-dimensional morphology map of the regular surface. Moreover, this reconstructed plane not only clearly illustrates the surface characteristics but also provides the foundation for analyzing the wear mechanism.

3D object reconstruction from depth image streams using Kinect-style depth cameras has been extensively studied. In this paper, we propose an approach for accurate camera tracking and volumetric dense surface reconstruction assuming a known cuboid reference object is present in the scene. Our contribu¬tion is three-fold. (a) We maintain drift-free camera pose tracking by incorporating the 3D geometric constraints of the cuboid reference object into the image registration process. (b) We reformulate the problem of depth stream fusion as a binary classification problem, enabling high-fidelity surface reconstruction, especially in the con¬cave zones of objects. (c) We further present a surface denoising strategy to mitigate the topological inconsistency (e.g., holes and dangling triangles), which facilitates the generation of a noise-free triangle mesh. We extend our public dataset CU3D with several new image sequences, test our algorithm on these sequences and quantitatively compare them with other state-of-the-art algorithms. Both our dataset and our algorithm are available as open-source content at https://github.com/zhangxaochen/CuFusion for oth-er researchers to reproduce and verify our results.

Deep Learning is a recent and important addition to the computational toolbox available for image reconstruction in fluorescence microscopy. We review state-of-the-art applications such as image restoration, super-resolution, and light-field imaging, and discuss how the latest Deep Learning research can be applied to other image reconstruction tasks such as structured illumination, spectral deconvolution, and sample stabilisation. Despite its successes, Deep Learning also poses significant challenges, has often misunderstood capabilities, and overlooked limits. We will address key questions, such as: What are the challenges in obtaining training data? Can we discover structures not present in the training data? And, what is the danger of inferring unsubstantiated image details?

Introduction: Desmoid tumor (DT) is a rare benign neoplasm rising from muscle aponeurosis, having been associated mostly with trauma or pregnancy. DT has an infiltrative and locally aggressive growth pattern and usually does not metastasize. However, it has a high recurrence and complication rate. When they occur in pregnancy, are all pregnancies and deliveries taken as individual case for optimal management by the physicians and midwifes, who need to be cautious in finding the optimal delivery mode for patients, which depends on tumor size, location, behavior and past history. Study Objectives: We present a case report of a large desmoid tumor of the anterior abdominal wall in a 29-year-old woman in pregnancy, presenting a delivery problem, which resolved in surgical management. Moreover, we are bringing a systematic review of the literature to provide an overview on pathomechanism, symptoms, diagnostics and treatment management of the pregnant women affected by DT. Results: The authors report a case of pregnant women who underwent systemic oncological treatment for abdominal wall desmoid tumor and have been pregnant afterwards. The observational conservative management was chosen with an elective cesarean section at the 38+4 pregnancy week with uncomplicated postpartum follow-up. Conclusion: Pregnancy-associated desmoid tumors are very rare and optimal management of this tumor is not well established, despite some guidelines for non-pregnant patients. The authors reviewed the literature focusing on the actual modern management of desmoid tumors at all, including patients during the pregnancy, as well.

The knowledge on anatomy, function, biomechanics, and role on surgical procedures of the anterolateral ligament (ALL) of the knee is still controversial. Only a few papers have examined the ALL in children. The aim of this review is to analyse all the available literature about ALL in pediatric population. Following the PRISMA criteria, the literature was systematically reviewed, examining all the articles about ALL in pediatric patients. Eight articles were involved in the study. Five cadaveric studies, 2 diagnostic studies and 1 Cross-sectional study were found. The identification of the ALL is not always possible in diagnostic studies using the Magnetic Resonance (MRI) or in dissecting specimens. A high variability in the presence of the ligament, in its origin and insertion were found among the studies. In younger patients is more difficult to identify the ligament than in older children, suggesting that its presence may develop at some point during the growth. Further studies are needed for a detailed knowledge of the ALL.

This paper discusses the use of networks of Inertial Measurement Units (IMU) for the reconstruction of trajectories from sensor data. Logistics is a natural application domain, to verify the quality of the handling of goods. This is a mass application and the economics of logistics impose that IMUs to be used must be low cost and use basic computational devices. The approach in the paper converts a strategy from the literature, used in the multi-target following problem, to reaching a consensus in a network of IMUs. The paper presents results on how to achieve the consensus in trajectory reconstruction, along with covariance intersection data fusion of the information obtained by all nodes in the network.

Currently, most deep learning methods cannot solve the problem of scarcity of industrial product defect samples and significant differences in characteristics. This paper proposes an unsupervised defect detection algorithm based on a reconstruction network, which is realized using only a large number of easily obtained defect-free sample data. The network includes two parts: image reconstruction and surface defect area detection. The reconstruction network is designed through a fully convolutional autoencoder with a lightweight structure. Only a small number of normal samples are used for training so that the reconstruction network can be A defect-free reconstructed image is generated. A function combining structural loss and L1 loss is proposed as the loss function of the reconstruction network to solve the problem of poor detection of irregular texture surface defects. Further, the residual of the reconstructed image and the image to be tested is used as the possible region of the defect, and conventional image operations can realize the location of the fault. The unsupervised defect detection algorithm of the proposed reconstruction network is used on multiple defect image sample sets. Compared with other similar algorithms, the results show that the unsupervised defect detection algorithm of the reconstructed network has strong robustness and accuracy.

Reconstruction of fine-scale information from sparse data is often needed in practical fluid dynamics where the sensors are typically sparse and yet, one may need to learn the underlying flow structures or inform predictions through assimilation into data-driven models. Given that sparse reconstruction is inherently an ill-posed problem, the most successful approaches encode the physics into an underlying sparse basis space that spans the manifold to generate well-posedness. To achieve this, one commonly uses generic orthogonal Fourier basis or data specific proper orthogonal decomposition (POD) basis to reconstruct from sparse sensor information at chosen locations. Such a reconstruction problem is well-posed as long as the sensor locations are incoherent and can sample the key physical mechanisms. The resulting inverse problem is easily solved using $l_2$ minimization or if necessary, sparsity promoting $l_1$ minimization. Given the proliferation of machine learning and the need for robust reconstruction frameworks in the face of dynamically evolving flows, we explore in this study the suitability of non-orthogonal basis obtained from Extreme Learning Machine (ELM) auto-encoders for sparse reconstruction. In particular, we assess the interplay between sensor quantity and sensor placement for a given system dimension for accurate reconstruction of canonical fluid flows in comparison to POD-based reconstruction.

Due to the still large number of patients diagnosed with pelvic neoplasms (colorectal, gynecological, and urological) in advanced stages right from the initial diagnosis, surgery represents the mainstay of treatment, often implying wide, eventually multi-organ resections in order to achieve negative surgical margins. Perineal wound morbidity, particularly in extralevator abominoperineal excision, leads to complications and local infection rates of up to 40%. Strategies to reduce postoperative wound complications are pursued to address this issue.The VRAM flap remains the gold standard for autologous reconstruction after pelvic oncological resection; it was initially designed for abdominal wall defects and later expanded for large pelvic tissue defects.The flap's application is based on its physical characteristics, including abundant tissue and a generous skin paddle, which effectively obliterates dead space after exenterations. The generous skin paddle offers good cosmetic and functional outcomes at the recipient site.This article describes the case of a patient histopathologically diagnosed with stage IIIA squamous cell carcinoma of the uterine cervix who received multimodal onco-surgical treatment. The surgical mainstay of this treatment is pelvic exenteration. Pelvic reconstruction after this major surgery was performed using a vertical flap with the rectus abdominis.

The 3D reconstruction of vermiculite-based sealing material was carried out based on CT scanning experiments and Avizo software. The precision and representation of the reconstructed digital core were tested by calculating the pore structure parameters and comparing them with the experimental results of mercury compression. Avizo is a perfect interface with Fluent software to perform micro-scale seepage simulation to explore the distribution of pressure and velocity fields during fluid transport. In this paper, a new approach is proposed to study the penetration leakage of non-metallic gaskets by using equivalent pore networks.

We explore the importance of curvature in carbonaceaous species transformation and stability, using laser-induced vaporisation to evaporate and ionise a source of curved polyaromatic hydrocarbons: carbon nanobelts. Collision impacts between species cause mass loss and the resultant ions are catalogued via mass-spectrometry. To interpret the mass spectra, we perform a series of “in-silico” simulated systematic hydrogen-loss studies using density functional theory (DFT) modelling, sequentially removing hydrogen atoms using thermodynamic stability as a selection for subsequent dehydrogenation. In an initial sequence of H2 removal, the rings are maintained through stable carbyne chain and pentagon-chain formation, giving rise to circular strained dehydrobenzoannulene species. The chains subsequently break, releasing CH and C2. While theoretical closed-cage routes are identified, they are not observed experimentally. The results can serve as a useful guide to high-energy impact conditions observed in some astrochemical environments.

Purpose: To evaluate three different microincisional ab interno trabeculectomy procedures in a porcine eye perfusion model. Methods: In perfused porcine anterior segments, 90 degrees of trabecular meshwork (TM) were ablated using the Trabectome (T; n = 8), Goniotome (G; n = 8), or Kahook device (K; n = 8). After 24 hours, additional 90 degrees of TM were removed. Intraocular pressure (IOP) and outflow facility were measured at 5 µL/min and 10 µL/min perfusion to simulate an elevated IOP. Structure and function were assessed with canalograms and histology. Results: At 5 µL/min infusion rate, T resulted in a greater IOP reduction than G or K from baseline (76.12% decrease versus 48.19% and 47.96%, P = 0.013). IOP reduction between G and K was similar (P = 0.420). Removing another 90 degrees of TM caused an additional IOP reduction only in T and G but not in K. Similarly, T resulted in the largest increase in outflow facility at 5 µL/min compared with G and K (first ablation: 3.41 times increase versus 1.95 and 1.87; second ablation: 4.60 versus 2.50 and 1.74) with similar results at 10 µL/min (first ablation: 3.28 versus 2.29 and 1.90 (P = 0.001); second ablation: 4.10 versus 3.01 and 2.01 (P = 0.001)). Canalograms indicated circumferential flow beyond the ablation endpoints. Conclusions: T, G and K significantly increased the outflow facility. In this model, T had a larger effect than G and K.

1) Objective: to evaluate the effects of excitatory transcranial magnetic stimulation of the anterior intraparietal area in chronic patients with a frontal lesion and parietal sparing due to stroke on the impaired upper (UL) and lower limb (LL) as measured by Fugl-Meyer Assessment (FMA). 2) Methods: three patients (P1: 49.83/2.75, P2: 53.17/3.83, P3:63.33/3.08 years-old at stroke/years post-stroke, respectively) received two weeks (five days/ week) of rTMS at 10 Hz of the left anterior intraparietal area (AIP). A patient was treated in similar conditions with a sham coil (56.58/4.33) No complimentary therapy was delivered during the study. Patients were evaluated before, after- and two-months post-treatment (A1, A2 and A3, respectively). 3) Results: We found increased scores for lower limb in motor function subsection for P1 and P3 and in sensory function for P2 by A2 that remained at A3. We also found an increased score for upper limb motor function for P2 and P3, but the score decreased by A3 for P2. P3 score for upper limb ROM increased by A3 compared to A1 and A2. 4) Conclusion: AIP excitatory rTMS increased the FMA scores for lower and upper limb function, showing a broader effect when compared to M1 stimulation.

We present a near real-time solution for 3D reconstruction from aerial images captured by consumer UAVs. Our core idea is to simplify the multi-view stereo problem into a series of two-view stereo matching problems. Our method applies to UAVs equipped with only one camera and does not require special stereo-capturing setups. We found that the neighboring two video frames taken by UAVs flying at a mid-to-high cruising altitude can be approximated as left and right views from a virtual stereo camera. Leveraging GPU-accelerated real-time stereo estimation, efficient PnP correspondence solving algorithms and extended Kalman filter, our system simultaneously predicts scene geometry and camera position/orientation from the virtual stereo cameras. Also, this method allows user selection of varying baseline lengths, which provides more flexibility given the trade-off between camera resolution, effective measuring distance, flight altitude, and mapping accuracy. Our method outputs dense point clouds at a constant speed of 25 frames per second and is validated on a variety of real-world datasets with satisfactory results.

Ionospheric delay has been a critical issue that limits the accuracy of GNSS precise positioning and navigation for single-frequency users, especially in mid- and low-latitude regions where irregularity of ionosphere is often significant. Kriging spatial interpolation techniques have been recently introduced to model the spatial correlation and variability of ionosphere, which intrinsically assume that the ionosphere field is stochastically stationary but does not take the random observational errors into account. In this paper, by treating the spatial statistical information on ionosphere as prior knowledge and based on TEC semivariogram analysis, we use Kriging techniques to spatially interpolate TEC values. By assuming that the stochastic models of both the ionospheric signals and measurement errors are only known up to some unknown factors, we propose a new Kriging spatial interpolation method with unknown variance components for both the signals of ionosphere and TEC measurements. Variance component estimation has been integrated with Kriging to reconstruct regional ionospherical delay. The method has been applied to data from the Crustal Movement Observation Network of China (CMONOC) and compared with the ordinary Kriging and polynomial interpolations with spherical cap harmonic functions, polynomial functions and low-degree spherical harmonic functions. The results have shown that the interpolation accuracy of the new proposed method is better than the ordinary Kriging and polynomial interpolation by about 1.2 TECU and 0.7 TECU, respectively. The root mean squared error of the proposed new Kriging with variance components is within 1.5 TECU and is smaller than those from other methods under comparison by about 1 TECU. When compared with ionospheric grid points, the mean squared error of the proposed method is within 6 TECU and smaller than Kriging, indicating that the proposed method can produce more accurate ionospheric delays and better estimation accuracy.

Critical sized bone defects and articular cartilage injuries resulting from trauma, osteonecrosis or age-related degeneration are often nonhealing by the physiological repairing mechanisms, thus representing a clinic issue due to the relevant epidemiological incidence. Current treatment approaches consist of autologous or allogenic grafting, which are associated with painfulness, morbidity, risk of infections and rejection. Novel tissue-engineering approaches, aiming at the reconstruction of damaged tissues, have been proposed as alternative solutions to these conven-tional methods. These approaches are based on the combination of three fundamental compo-nents: autologous or allogenic cells, a scaffold and growth-stimulating signals, which are gener-ally referred to as the tissue engineering triad. Three-dimensional polymer networks are fre-quently used as scaffolds to allow cell proliferation and tissue regeneration. In this scenario, cryogels are giving promising results as cell scaffolds over other polymer networks, thanks to their peculiar properties. In particular, cryogels possess an interconnected porous structure and a typical sponge-like behaviour, which facilitate the cellular infiltration and ingrowth. Their properties can be appropriately adjusted to match the requirements of the specific tissue or or-gan that it is intended to regenerate. In this review it is reported the state of the art on the fabri-cation and employment of cryogels in supporting osteo or chondro-genic differentiation for the re-building of more organized tissues. Moreover, it will highlight current progress and future perspectives in the implementation of this technology in the clinical practice.

3D Zernike moments based on 3D Zernike polynomials have been successfully applied to the field of voxelized 3D shape retrieval and have attracted more attention in biomedical image processing. As the order of 3D Zernike moments increases, both computational efficiency and numerical accuracy decrease. Due to this phenomenon, a more efficient and stable method for computing high-order 3D Zernike moments was proposed in this study. The proposed recursive formula for computing 3D Zernike radial polynomials combines the recursive calculation of spherical harmonics to develop a voxel-based algorithm for the calculation of 3D Zernike moments. The algorithm was applied to the 3D shape Michelangelo's David with a size of 150×150×150 voxels. As compared to the method without additional acceleration, the proposed method uses a group action of order sixteen orthogonal group and saving unnecessary iterations, the factor of speed-up is 56.783±3.999 when the order of Zernike moments is between 10 and 450. The proposed method also obtained an accurate reconstructed shape with the error rate (normalized mean square error) of 0.00 (4.17×10^-3) when the reconstruction was computed for all moments up to order 450.

The brain reciprocally communicates with the rest of the body via neural, endocrine, immune, and other systems. This is crucial for coordinating the complex behavioral and physiological responses needed to cope with the many challenges of life. The Anterior Cingulate Cortex (ACC) is a key brain structure involved in assessing rewards and threats, as well as activating appropriate responses. This is a dynamic process that depends on evolving needs and challenges. Important challenges include illness or injury. These typically involve inflammation and pain, which evoke neuroinflammatory processes in the brain to drive sickness behaviours. In the short term, sickness behaviours are considered adaptive, as they promote convalescence (e.g. low mood; lethargy, fatigue, social withdrawal), and enhanced threat appraisal (e.g. anxiety) to combat increased risk/vulnerability associated with sickness. Chronic inflammation, however, appears to remodel the system to inappropriately activate threat-coping responses, resulting in depressive and/or anxious phenotypes. These mood disorders are particularly pronounced in diseases and disorders associated with gut dysfunction, which feature chronic inflammation and altered ACC function. We propose that chronic inflammation remodels ACC physiology such that it errantly predicts heightened danger based on a mental model (a.k.a ‘schema’) of the world. This evokes chronic activation of threat-coping systems, including endocrine signaling (e.g. adrenaline), and anxiety. Inflammation can be driven by brain systems involving ACC, leading to a feedback-cycle that self-reinforces pathological states. This theory accounts for a wealth of clinical and preclinical data that implicate the ACC in disorders of mood and gastrointestinal function, and reveals a key player in the gut-brain axis that may represent a novel therapeutic target.

A new method for multi-shot reconstruction of high-energy photon distributions in the context of studying the interaction between a beam and a plasma in plasma wakefield acceleration (PWFA) experiments is presented. The study investigates the effects of beam perturbations on betatron radiation and analyzes how these perturbations can lead to hosing, a transverse instability that can degrade the quality of the beam. The potential of betatron radiation spectroscopy as a non-invasive diagnostic technique for PWFA experiments is also emphasized.

Several effective online and offline inference tools offer an interactive platform for inference, visualization, and analysis of gene regulatory networks. However, a tool currently needs to offer a scalable, lightweight, integrated online platform for carrying out inference, visualization, benchmarking, and extensive network analysis in an integrated manner. We introduce NetRA (Network Reconstruction and Analysis for Gene Regulatory Network), a comprehensive web tool for network analysis, visualization, and inference of large expression networks. Additionally, a platform for benchmarking and evaluation is provided. In order to deliver a highly scalable, lightweight, and rich user interface, the tool is created using the most recent technologies. We incorporate the original code of eleven (11) inference algorithms (not limited to) from Bioconductor in the current version. We also report a qualitative comparison of 11 candidate methods regarding prediction accuracy and network characteristics which will shed light on their performance against 4000 sizes synthetic DREAM network. We believe the tool will significantly aid biologists' downstream system biology research. NetRA tool can be extensible to different kinds of complex network analyses. Availability: On request ([email protected]).

Pure monocular 3D reconstruction is an ill-posed problem that has attracted the research community's interest due to the affordability and availability of RGB sensors. SLAM, VO, and SFM are disciplines formulated to solve the 3D reconstruction problem and estimate the camera’s ego-motion, so many methods have been proposed. However, most of these methods were not evaluated in large datasets, under various motion patterns, had not been tested under the same metrics, and most of them had not been evaluated following a taxonomy, making their comparison and selection difficult. In this research, we performed a comparison of ten publicly available SLAM and VO methods following a taxonomy, including one method for each category of the primary taxonomy, three machine learning-based methods, and two updates of the best methods, to identify the advantages and limitations of each category of the taxonomy and test if the addition of machine learning or the updates made on those methods improved them significantly. Thus, we evaluated each algorithm under the TUM-Mono benchmark and performed an inferential statistical analysis to identify significative differences through its metrics. Results determined that sparse-direct methods significantly outperformed the rest of the taxonomy, and fusing them with machine learning techniques significantly improves the performance of geometric-based methods from different perspectives.

Given a stream of depth images with a known cuboid reference object present in the scene, we propose a novel approach for accurate camera tracking and volumetric surface reconstruction in real-time. Our contribution in this paper is threefold: (a) utilizing a priori knowledge of the cuboid reference object, we keep drift-free camera tracking without explicit global optimization; (b) we improve the fineness of the volumetric surface representation by proposing a prediction-corrected data fusion strategy rather than simple moving average, which enables accurate reconstruction of high-frequency details such as sharp edges of objects and geometries of high curvature; (c) we introduce a benchmark dataset CU3D containing both synthetic and real-world scanning sequences with ground-truth camera trajectories and surface models for quantitative evaluation of 3D reconstruction algorithms. We test our algorithm on our dataset and demonstrate its accuracy compared with other state-of-the-art algorithms. We release both our dataset and code as opensource1 for other researchers to reproduce and verify our results.

We performed arthroscopically assisted coracoclavicular (CC) stabilization using a suture button device for modified Neer type IIb lateral clavicle fractures accompanied by CC ligament injury. The purpose of the present study was to evaluate the radiological and clinical outcomes of this procedure. Six consecutive patients with modified Neer type IIb fractures were treated with the technique and followed for 12 months. Postoperative ranges of motion (ROMs) and X-rays were evaluated every 3 months. Shoulder functional scores (University of California Los Angeles score, Japanese Orthopedics Association score), visual analog scale (VAS) scores for pain at rest, at night, and during motion, and VAS score for satisfaction were analyzed at 12 months after surgery. For the clinical outcomes, early ROM recovery and excellent outcomes were achieved. For the radiological outcomes, all patients accomplished bone union, slight superior displacement was noted in the CC distance and Dog Bone distance, and bone hole dilation was observed in the superior coracoid and inferior clavicle, but there were no critical complications. The present findings indicate that arthroscopically assisted CC stabilization with a suture button device for unstable lateral clavicle fractures can produce satisfactory radiological and clinical results.

Abstract: Periodontal disease is the main reason for tooth loss in adults. Tissue engineering and regenerative medicine are the advanced technologies used to manage soft and hard tissue defects caused by periodontal disease. We developed a transforming growth factor-β3 chitosan sponge (TGF-β3/CS) to repair periodontal soft and hard tissue defects. We investigated the proliferation and osteogenic differentiation behaviors of primary human periodontal ligament stem cells (hPDLSCs) to discuss the bioactivity and application of TGF-β3 in periodontal disease. We separately used Calcein-AM/PI double-labeling or CM-Dil-labeling coupled with fluorescence microscopy to trace the survival and function of the cells after implantation in vitro or in vivo. The mineralization of osteogenic differentiated hPDLSCs was confirmed by measuring ALP activity and calcium content. The levels of COL I, ALPL, TGF-βRI, TGF-βRII, and Pp38/t-p38 were tested using Western blot to explore the mechanism of bone repair prompted by TGF-β3. When hPDLSCs were inoculated with different concentrations of TGF-β3/CS (62.5–500 ng/mL), ALP activity was the highest in TGF-β3 (250 ng/mL) group after seven days (P < 0.05 vs. control); the calcium content in each group increased significantly after 21 and 28 days (P < 0.001 vs. control). The best result was achieved in the TGF-β3 (500 ng/mL) group. All results showed that TGF-β3/CS can promote osteogenic differentiation of hPDLSC and may be involved in the p38 MAPK signaling pathway. TGF-β3/CS has the potential for application in the repair of incomplete alveolar bone defects.

We addressed whether arbitrary top–down regulation based on self-referential thinking could be valid for sensorimotor synchronization. We hypothesized that the dorsal anterior cingulate cortex (dACC) could regulate sensorimotor synchronization in accordance with internal models generated by self-referential processing. To illustrate the validity of the hypothesis, we conducted a missing oddball task with musical students. Utilizing the event-related deep-brain activity (ER-DBA) method cooperatively with the event-related potential (ERP) method, we found that dACC activation promotes repetitive tapping supported by modal completion, whereas dACC deactivation promotes precise tapping under avoiding erroneous responses for the missing pulses. Endogenous ERP components including P150 as a marker of modal completion and N200 as a marker of response inhibition supported this claim. Furthermore, combining the ER-DBA and ERP results, it was suggested that the brain creates a coherent story to promote repetitive tapping by mediating sensory evidence via modal completion. The free energy measurements theoretically support these findings, thereby confirming the validity of our hypothesis.

Purpose: To compare the standard implantation technique of a new ab externo microshunt (PRESERFLO) to a posterior technique with a small incision. The standard anterior approach (A) requires a relatively large, 6-8 mm perilimbal peritomy. In contrast, the posterior approach (P) involves only a 2-3 mm snip incision 2 mm posterior to the limbus. Methods: Charts of 126 PRESERFLO patients (54 A and 72 P) were retrospectively analyzed. Follow-up was 270 days. We compared the surgical time, intraocular pressure (IOP), number of medications, and complications. Results: The preoperative IOP in A was 21.8±8.5 mmHg and 23.9±8.1 mmHg in P (p=0.08). The surgical time for A was 26±0.8 minutes and 10±0.4 minutes for B (p<0.001). Following a low-pressure phase during the first week, A and P had an IOP value of 10.8±5.9 mmHg and 10.6±4.5 mmHg at 30 days, respectively (p=0.62). IOPs remained at this level throughout the study (all intra-group p> 0.08). There were no inter-group differences in IOP at any visit (all p-values > 0.3). Patients in A and P took 3.2 ± 1.3 and 3.3 ± 1.0 pressure-lowering medications at baseline, respectively (p=0.4). These values declined to 0.2 ± 0.6 in A and 0.3 ± 0.7 in P at 270 days. Both groups had a similar number of revisions (13 (10.3%) versus 10 (7.9%, p=0.14)) and complications (26 (20.8%) versus 31 (24.6%, all p>0.25). Conclusion: The posterior PRESERFLO insertion technique was 2.6 times faster than the standard anterior technique and yielded similar results with a large reduction in IOP and medications and a safety profile favorable over traditional filtering surgery.

Purpose: To derive and provide analytic formulas for accommodative gain of presbyopia eyes. via sclera ablation and/or thermal shrinkage such that lens is reshaped an/or its positon is shifted. New mechanisms are also proposed. Study Design: To increased accommodation of presbyopia. Place and Duration of Study: New Taipei City, Taiwan, between June, 2021 and July, 2021. Methodology: Accommodation gain is calculated by a 4-component theory, in which the rate functions are derived by an effective eye model for the change of anterior curvature of the lens and its anterior shift. The measured data of accommodative response of the lens versus the lens curvature change and anterior shift are analyzed. The measured net change of the posterior vitreal zonules (PVZ) length and the space between the ciliary body and lens (CLS) during the accommodation are also analyzed. Results: The accommodative gain (AG) is mainly due the change of lens anterior curvature and its anterior shift. The AG per diopter change of the reshaped lens is 0.62 to 0.68 by our formulas, comparing to the measured average value M'=0.69. The efficacy of LASA (or AG) is proportional to the amount of scleral tissue removed (or shrinkaged), such that more space is produced for the change of PVZ and CLS from a UCS to AS for accommodation. Conclusion: The AG is proportional to the amount of scleral tissue removed (or shrinkaged), such that more space is produced for the change of PVZ and CLS from a UCS to AS for accommodation.

Background: Despite the fact that bone reconstructive surgeries are widely practiced worldwide, the search for an ideal bone replacement matetrial is still an open issue. We aimed to provide an overview of the current status of research and developments in this field with a focus on sapphire materials; Methods: A literature search and review was conducted using the PubMed, Scopus, and Embase databases. We searched for literature using the following keywords: bone implants; biocompatible materials; bone replacement material; sapphire implants; Results: Sapphire has a unique combination of mechanical, physical and chemical characteristics thanks to wich it has an excelent biocompatability and biointegrity.Unlike other materials it is incredibly strong and has a high endurance. The successful experience of using this material in medical instrument engineering, dentistry and cardiac surgery shows its benefits; Conclusions: We consider that sapphire is a perspective material for bone replacement implants and researchers should look in this direction.

As a high-quality forestry product with excellent performance, particleboard is widely used in many fields and has great market potential. At present, it is a research difficulty to accurately identify small, fine and different shapes of defects on the whole particleboard through machine vision technology. The application of image super-resolution reconstruction technology on particleboard can improve the surface image quality of particleboard, which is conducive to the subsequent improvement of defect detection accuracy. In this study, super-resolution dense attention generative adversarial network (SRDAGAN) model was improved to solve the problem that super-resolution generative adversarial network (SRGAN) reconstructed image would produce artifacts and its performance needed to be improved. The Batch Normalization (BN) layer was removed, the convolutional block attention module (CBAM) was optimized to construct dense block, and the dense blocks were constructed by densely skip connection. Then, the corresponding 52400 image blocks with high resolution and low resolution were trained, verified and tested according to the ratio of 3:1:1. The model was comprehensively evaluated from the effect of image reconstruction and the two indexes of PSNR and SSIM. It was found that compared with BICUBIC and SRGAN, PSNR index of SRDAGAN increased by 4.88dB and 3.25dB respectively, and SSIM increased by 0.0507 and 0.1122 respectively. The reconstructed images not only had clearer texture, but also had more realistic expression of various features, and the performance of the model had been greatly improved. At the same time, this study also emphatically discussed on the image reconstruction effect with defects. The result showed that the SRDAGAN proposed in this study can complete the super-resolution reconstruction of particleboard images with high quality. In the future, it can also be further combined with defect detection for actual production to improve the quality of forestry products and increase economic benefits.

We discuss the optimal control formulation for enhancement and denoising of satellite multiband images and propose to take it in the form of an L1-control problem for quasi-linear parabolic equation with non-local p[u]-Laplacian and with a cost functional of a tracking type. The main characteristic feature of the considered class of parabolic problems is the fact that the variable exponent p(t,x) and the anisotropic diffusion tensor D(t,x) are not well predefined a priori, but instead these characteristic non-locally depend on a solution of this problem, i.e., pu=p(t,x,u) and Du=D(t,x,u). We prove the existence of optimal pairs with sparse L1-controls using for that the indirect approach and a special family of approximation problems.

The simultaneous breaking of time-reversal and inversion symmetry, in connection to superconductivity, leads to transport properties with disrupting scientific and technological potential. Indeed, the anomalous Josephson effect and the superconducting diode effect hold promises to enlarge the technological applications of superconductors and nanostructures in general. In this context, the system we theoretically analyze is a Josephson junction (JJ) with coupled reconstructed topological channels as a link; such channels are at the edges of a two-dimensional topological insulator (2DTI). We find a robust $\varphi_0$ Josephson effect without requiring the presence of external magnetic fields. Our results, which rely on a fully analytical analysis, are substantiated by means of symmetry arguments: Our system breaks both time-reversal symmetry and inversion symmetry. Moreover, the anomalous current increases as a function of temperature. We interpret this surprising temperature dependence by means of simple qualitative arguments based on Fermi's golden rule.

Optical motion capture is a mature contemporary technique for the acquisition of motion data, alas it is non-error-free. Due to technical limitations and occlusions of markers, gaps might occur in such recordings. The article reviews various neural network architectures applied for gap filling problem in motion capture sequences within FBM framework providing the representation for body kinematic structure. The results are compared with interpolation and matrix completion methods. We found out, that for longer sequences simple linear feedforward neural networks can outperform the other, sophisticated architectures. We were also able to identify, that acceleration and monotonicity of input sequence are the parameters that have a notable impact on the obtained results.

This study aims to establish whether the use of biomaterials, particularly polydimethylsiloxane (PDMS), for surgical reconstruction of the esophagus with templates, Montgomery salivary tube, after radical oncology surgery for malignant neoplasia is an optimal choice for patients’ safety and for optimal function preservation and organ rehabilitation. Methods: Structural analysis by Raman spectrometry and biomechanical properties with dynamic mechanical analysis are performed for fatigue strength and toughness, essential factors in durability of a prosthesis in the reconstruction practice of the esophagus. Nanocomposites with silicone elastomers and nanoparticles used in implantable devices and in the reconstruction surgery are facing risks of infection and fatigue strength when required to perform a mechanical effort for long periods of time. Results: This report takes into account the effect of silver (Ag) nanoparticles on the fatigue strength using polydimethylsiloxane (PDMS) matrix, representative for silicon elastomers used in implantable devices. PDMS with 5% (wt) Ag nanoparticles of 100-150 nm during mechanical fatigue testing at shear strength loses elasticity properties after 400 loading-unloading cycles and up to 15% shear strain. The fatigue strength, toughness, maximum shear strength are the key issues in designing Montgomery salivary tube with appropriate biomechanical behavior for each patient. Conclusions: Prosthesis design needs to indulge both clinical outcome as well as design methods and research in the field of biomaterials.

With the development of hyperspectral technology, to establish an effective spectral data compressive reconstruction method that can improving data storage, transmission and maintaining spectral information is critical for quantitative remote sensing research and application in vegetation. By introducing the idea of compressive sensing in compressed reconstruction, the spectral adaptive grouping distributed compressive sensing algorithm is proposed, which enables a distributed compressed sensing reconstruction of plant hyperspectral data. The experimental results showed that comparing with orthogonal matching pursuit(OMP) and gradient projection reconstruction(GPSR), the proposed algorithm can significantly improve the visual effect of image reconstruction in the spatial domain. The PSNR in low sampling rate(sampling rate is lower than 0.2) increases by 13.72dB than OMP and 1.66dB than GPSR. In the spectral domain, the average normalized root mean square error、the mean absolute percentage error and the mean absolute error of the proposed algorithm is35.38%，31.83% and 33.33% lower than GPSR respectively.. Therefore, the proposed algorithm can achieve relatively high reconstructed efficiency.

Aim: the main aim of this study is to compare the onset of effectiveness of mental nerve block with lingual infiltration and inferior alveolar nerve block on patients visiting dental hospital for extraction of mandibular anterior teeth. Materials and methods: The study was set in a clinical setting. This was a randomized controlled double-blind cross study, where 25 subjects received two treatments at an interval of at least 1 week in a within a dental hospital.Inferior alveolar nerve block and lingual nerve block injection is given with 2mL lignocaine 2% with 1:2,00,000 epinephrine was administered for the right side. Mental nerve block along with lingual infiltration of the corresponding tooth was given with 2mL lignocaine 2% with 1:2,00,000 epinephrine was administered on the left side.Visual analogue scale (VAS) was used in this study, which consists of a scale with range of 0-10 pain severity on which 0 indicated absence of pain and 10 the worst pain possible. The patients were asked to give scores corresponding to his/her pain, after IANB, mental nerve block and lingual infiltration and these scores were recorde.Results: From the results we can see that patients gave scores between 3-4, stating that they had moderate pain during extraction after administration of IANB (54%) (graph 2) and VAS scores of 0-1 were given by patients, which is suggestive of no pain during extraction after administration of Mental nerve block and lingual nerve infiltration (62%)Conclusion: Within the limits of the study we can conclude that mental nerve block along with lingual infiltration is an effective way to completely and quickly anaesthetise the central incisor to the 1st premolar region.

Transarterial embolization (TAE) for high-flow pancreaticoduodenal artery (PDA) aneurysms in patients with celiac-trunk stenosis by the median arcuate ligament (MAL) has been found effective both after rupturing and to prevent rupture. The objective was to describe the TAE techniques used and their effectiveness in excluding PDA aneurysms due to MAL syndrome. This single-center retrospective study done at the Dijon-Bourgogne University Hospital included all patients treated by TAE in 2010–2022 for ruptured or unruptured high-flow PDA aneurysms caused by MAL syndrome. We identified 14 patients (7 women and 7 men; mean age, 64 years). Packing and trapping techniques were used alone or together. Occlusion was with microcoils, co-polymer, or cyanoacrylate glue, used separately or combined. Technical success was achieved in 13 (93%) patients. Clinical success was achieved in 12 (86%) patients. One major and two minor complications were recorded within the first 30 days. No complications occurred after 30 days. Follow-up ranged from 1 to 84 months. No cases of aneurysm recanalization were recorded to date. TAE had high technical and clinical success rates in our patients with unruptured or ruptured PDA aneurysms due to MAL syndrome.

In recent years, the rapid development of computer-aided planning and design technology has provided a new perspective for the study of complex problems such as the generation of architectural complex forms. This study focuses on how to apply parameterization technology to analyze and articulate traditional spatial form composition rules, aiming to minimize reliance on subjective human judgment in the protection and renewal design of the historical style of traditional villages. It aims to establish digital generative design tools to address the challenges of accurately inheriting and innovatively utilizing historical and cultural information in traditional settlements. It introduces how to rely on parameterization technology to analyze the spatial form composition rules, parameter extraction rules, and spatial reconstruction rules of traditional villages, facilitating the complete process from spatial features to parameterization rules, and then to the application of computational methods to deduce spatial features. It also includes case studies demonstrating the application of parameterization technology tools for village protection and explores the role of generative design tools in preserving the spatial style of these settlements.

Constraint-based metabolic modeling approaches have enhanced our knowledge and understanding of the metabolism of prokaryotes and eukaryotes. This approach highly depends on the reconstruction process of genome-scale metabolic models (Mmodels). M-models can guide effective experimental design and yield new insights into the function and control of biological systems. Despite the recent advances in the automated generation of draft metabolic network reconstructions, the manual curation of these networks remains a labor-intensive and challenging task. Thus, these ten quick tips for the manual curation process are essential for optimizing high-quality metabolic model generation in less time. This collection of tips describes in great detail the resources and methods to ensure successful reconstruction. Furthermore, it increases the scope of other protocols of metabolic modeling by including resources to reconstruct eukaryotic organisms. Thus, all tips are applicable to a wide range of eukaryotic organisms. We believe this manuscript will interest a broad audience and researchers from different disciplines, spanning from microbiology and systems biology to biotechnology.

Weather radar plays a crucial role in the monitoring of severe convective weather. However, due to its limited detection range, it cannot conduct effective monitoring in remote offshore areas. Therefore, this paper utilized the Unet++ to establish a model for retrieving radar composite reflectivity based on Himawari-9 satellite datasets. In the process of comparative analysis, we found that both satellite and radar data exhibit significant diurnal cycles, but there are notable differences in their variation characteristics. To address this, we established 4 comparative models to test the influence of latitude and diurnal cycles on the inversion results. The results show that adding the distribution map of the minimum cloud-top brightness temperature at the corresponding time in the model can effectively reduce the root mean square error (RMSE) of the model and enhance the accuracy of severe convective weather monitoring. This conclusion can be applied in the future to enhance and improve satellite quantitative precipitation estimation.

(1) Importance of problem: Breast cancer accounted for 685.000 deaths globally in 2020, and half of all cases occur in women with no specific risk factor beside gender and age-group. During last 4 decades we see a reduction by 40% of age-standardized breast cancer [1], which in turn means that the number of mastectomies performed for younger women increased, raising the need for adequate breast reconstructive surgery. Advances in oncological treatment have made it possible to limit the extent of what represents radical surgery for breast cancer, yet in the past decade, we see a marked trend toward mastectomy in breast conserving surgery eligible patients [2]. Prophylactic mastectomy has also registered an upward trend [3,4]. This trend together with new indication for breast reconstruction like chest feminization in transgender patients [5] have increased the need for breast reconstruction surgery. (2) Purpose: The purpose of this study is to analyze the types of reconstructive procedures, their indications, their limitations, their functional results and the safety profiles when used during the integrated treatment plan of the oncologic patient; (3) Methods: We conducted an extensive literature review of the main reconstructive techniques, especially the autologous procedures, summarized the findings and presented a few cases from our own experience for exemplification of the usage of breast reconstruction in oncologic patients. (4) Conclusions: Breast reconstruction has become a necessary step in the treatment of most breast cancers and many reconstructive techniques are now routinely practiced. Microsurgical techniques are considered the "gold standard", but they are not accessible to all services, from a technical or financial point of view, so pediculated flaps remain the safe and reliable option, along with alloplastic procedures, to improve the quality of life of these patients.

It is important for researchers in material domain to reconstruct and visualize the microstructure of alloy, which helps discover morphologies and properties that can only be found in three dimensional and microscopic space. However, because of the limitation of state-of-the-art sensors, the internal microstructure of the material is not easy to obtain. In this paper, a novel automatic 3D reconstruction method is proposed using diffraction contrast tomography technology to capture the 3D microstructure of Al-La alloy. The pipeline of the proposed method starts from the imaging of Al-La alloy with the LabDCT technique from Carl Zeiss AG, which produces a sequence of 2D microstructure sections. Then, a segmentation algorithm based on superpixel and lifted multicut is proposed to extract the 2D microstructure in an image section. Finally, 2D segmentations are joined together to reconstruct and visulize the 3D microstructure. As a result, a novel morphology of Al-La alloy is recovered with both dendrite and lamellar morphologies. The proposed method has the advantage of the ability to losslessly recover the internal microstructure.

Myocilin is an enigmatic glaucoma-associated glycoprotein whose biological role remains incompletely understood. To gain novel insight into its normal function, we used transposon-mediated transgenesis to generate the first zebrafish line stably overexpressing myocilin [Tg(actb1:myoc-2A-mCherry)]. qPCR showed an approximately four-fold increased myocilin expression in transgenic zebrafish embryos (144 hpf). Adult (13 months old) transgenic animals displayed variable and age-dependent ocular anterior segment alterations. Almost 60% of two-years old male, but not female, transgenic zebrafish developed enlarged eyes with severe asymmetrical and variable abnormalities in the anterior segment, characterized by corneal limbus hypertrophy, and thickening of the cornea, iris, annular ligament and lens capsule. The most severe phenotype presented small or absent ocular anterior chamber and pupils, due to iris overgrowth along with dysplastic retinal growth and optic nerve hypertrophy. Immunohistochemistry revealed increased presence of myocilin in most altered ocular tissues of adult transgenic animals, as well as signs of retinal gliosis, and expanded ganglion cells and nerve fibers. The preliminary results indicate that these cells contributed to retinal dysplasia. Visual impairment was demonstrated in all old male transgenic zebrafish. Transcriptomic analysis of the abnormal transgenic eyes identified disrupted expression of genes involved in lens, muscular and extracellular matrix activities, among other processes. In summary, the developed transgenic zebrafish provides a new tool to investigate this puzzling protein and provides evidence for the role of zebrafish myocilin in ocular anterior segment and retinal biology, through the influence of extracellular matrix organization and cellular proliferation.

Background: To evaluate the effect of systemic erythropoietin, as well as oral steroids, in the management of recent onset non-arteritic anterior ischemic optic neuropathy (NAION). Method: Ninety-nine eyes of 99 patients diagnosed with NAION within 5 days of onset were included in this single masked randomized clinical trial. Thirty-four patients were randomized into group 1 (systemic erythropoietin), group 2 (oral steroids), and group 3 (control). Group A received 10,000 units of erythropoietin twice a day for three days. Group B received oral prednisone 75 mg daily for two weeks followed by a tapering dose (70 mg for 5 days, 60 mg for 5 days, and 5 mg reductions thereafter every 5 days). Functional and structural outcomes were analyzed at 3 and 6 months following treatment. Best corrected visual acuity (BCVA) was the main outcome measure, and mean deviation (MD) of visual field (VF) test and peripapillary retinal nerve fiber layer thickness (PRNFLT) were secondary outcome measures. Results:The mean BCVA (±SD) at the time of presentation was 1 ± 0.56, 1.01 ± 0.6, and 0.94 ± 0.47 logMAR in groups A, B, and C, respectively (P = 0.140); corresponding values were 0.72 ± 0.45, 0.83 ± 0.46, and 0.78 ± 0.4 logMAR (P = 0.417), and at 6-month follow-up, they were 0.70 ± 0.44, 0.73 ± 0.35, and 0.75 ± 0.39 logMAR, respectively (P = 0.597). Fifty-five percent of patients in group A vesus 34.3% in group B, and 31.2% in group C had an improvement of at least 3 lines in the BCVA values at the 6th-month follow-up visit. (P= 0.04) The mean deviation (MD) at the time of presentation was 19.67 ± 6.2, 20.83 ± 4.83, and 18.94 ± 6.92 decibels (db), respectively (P= 0.483).The corresponding values at month 3 were 18.22 ± 7.5, 19.82 ± 7.15, and 17.65 ± 7.22 db, (P = 0.848); and at month 6 they were 16.56 ± 7.08, 18.15 ± 6.57, and 15.9 ± 5.97 db, respectively. (P = 0.699) PRNFLT at presentation was 189 ± 58, 193 ± 64, and 199 ± 62 micrometers, respectively (P = 0.779), which decreased to 110 ± 45, 127 ± 37, and 119 ± 37 at month 3 (P = 0.423). The corresponding values for month 6 were 88 ± 12, 74 ± 25, and 71 ± 18, respectively (P = 0.041). Conclusion: The findings of our study indicate the beneficial effects of systemic erythropoietin in preserving the function and structure of the optic nerve in recent onset NAION.

X-ray tomography is an effective non-destructive testing method for industrial quality control. Limited angle tomography can be used to reduce the amount of data that needs to be acquired and thus speed up the process. In some industrial applications, however, objects are flat and layered, and laminography is preferred. It can deliver 2D images of the structure of a layered object at a particular depth from very limited data. An image at a particular depth is obtained by summing those parts of the data that contribute to that slice. This produces a sharp image of that slice while superimposing a blurred version of structures present at other depths. In this paper, we investigate an optimal experimental design (OED) problem for laminography that aims to determine the optimal source positions. Not only can this be used to mitigate imaging artifacts, it can also speed up the acquisition process in case where moving the source and detector is time consuming (e.g., in robotic arm imaging systems). We investigate the imaging artifacts in detail through a modified Fourier Slice Theorem. We address the experimental design problem within the Bayesian risk framework using empirical Bayes risk minimization. Finally, we present numerical experiments on simulated data.

In the present work, the main methodologies used to reconstruct wind fields in the U-SPACE have been analyzed. The SESAR U-SPACE program aims to develop an Unmanned Traffic Management system with a progressive introduction of procedures and services designed to support a secure access to the air space for a large number of drones. The Italian Aerospace Research Center (CIRA) is carrying out the EDUS project focused on the development and validation of operating platform demonstrators serving the micro-scale weather forecasts and the collection of information necessary for the definition of the flight plan of the drones in urban contexts. For this reason, the state of art methodologies that can be used to estimate winds at low altitudes in urban areas starting from available observational data have been reviewed in the present paper. Some of these techniques were originally developed for reconstruction at high altitudes, but successively adapted to treat different heights. A common approach to all techniques is to approximate the probabilistic distribution of wind speed over time with some parametric models, apply spatial interpolation to the parameters and then read the predicted value.

In this paper, our goal is to perform a virtual restoration of an ancient coin from its image. The present work is the first one to propose this problem, and it is motivated by two key promising applications. The first of these emerges from the recently recognised dependence of automatic image based coin type matching on the condition of the imaged coins; the algorithm introduced herein could be used as a pre-processing step, aimed at overcoming the aforementioned weakness. The second application concerns the utility both to professional and hobby numismatists of being able to visualise and study an ancient coin in a state closer to its original (minted) appearance. To address the conceptual problem at hand, we introduce a framework which comprises a deep learning based method using Generative Adversarial Networks, capable of learning the range of appearance variation of different semantic elements artistically depicted on coins, and a complementary algorithm used to collect, correctly label, and prepare for processing a large numbers of images (here 100,000) of ancient coins needed to facilitate the training of the aforementioned learning method. Empirical evaluation performed on a withheld subset of the data demonstrates extremely promising performance of the proposed methodology and shows that our algorithm correctly learns the spectra of appearance variation across different semantic elements, and despite the enormous variability present reconstructs the missing (damaged) detail while matching the surrounding semantic content and artistic style.

Abstract: Characterization the 3-D structure of clouds is needed for a more complete understanding of the Earth's radiative and latent heat fluxes. Here we develop and explore a “ray casting” algorithm applied to the Multi-angle Imaging SpectroRadiometer (MISR) on board the Terra satellite, to reconstruct 3-D cloud volumes for observed clouds. The ray casting algorithm is first applied to geometrically simple synthetic clouds to show that, under the assumption of perfect, clear-conservative cloud masks, the reconstruction method yields overestimation whose magnitude depends on the cloud geometry and the resolution of the reconstruction grid relative to the image pixel resolution. The method is then applied to two select MISR scenes, fully accounting for MISR’s viewing geometry for reconstructions over the Earth’s ellipsoidal surface. The MISR Radiometric Camera-by-camera Cloud Masks at 1.1 km resolution and custom cloud masks at 275 m resolution independently derived from MISR RGB channels are used as input cloud masks. A wind correction method, termed “cloud spreading”, is devised and applied to the cloud masks to offset potential cloud movements over short time intervals (around 7 minutes at maximum) between the cameras. The MISR cloud top height product is used as a constraint to reduce the overestimation at the cloud top. The reconstruction results show that their uncertainty is significant when the wind correction is applied, and that they have more refined structures when the input cloud mask has a higher resolution. Recommendations for improving the presented cloud volume reconstructions as well as for future passive remote sensing satellite missions are discussed.

UAV photogrammetry development during the last decade has allowed to catch information at a very high spatial and temporal resolution from terrains with very difficult or impossible human access. This paper deals with the application of these techniques to study and produce information of very extreme topography which is useful to plan works on this terrain or monitoring it over the time to study its evolution. The methodology stars with the execution of UAV flights on the cut slope studied, one with the cam vertically oriented and other at 45º respect that orientation. Ground control points (GCPs) and check points (CPs) were measured for georeference and accuracy measurement purposes. Orthophoto was obtained projecting on a fitted plane to a studied surface. Moreover, since a digital surface model (DSM) is not able to represent faithfully that extreme morphology, information to project works or monitoring it has been derived from the point cloud generated during the photogrammetric process. An informatics program was developed to generate contour lines and cross sections derived from the point cloud, which was able to represent all terrain geometric characteristics, like several Z coordinates for a given planimetric (X, Y) point. Results yield a root mean square error (RMSE) in X, Y and Z directions of 0.053 m, 0.070 m and 0.061 m respectively. Furthermore, comparison between contour lines and cross sections generated from point cloud with the developed program on one hand and those generated from DSM on other hand, shown that the former are capable of representing terrain geometric characteristics that the latter cannot. The methodology proposed in this work has been shown as an adequate alternative to generate manageable information, as orthophoto, contour lines and cross sections, useful for the elaboration, for example, of projects for repairing or maintenance works of cut slopes with extreme topography.

Deep learning image reconstruction (DLIR) algorithms employs convolutional neural networks (CNNs) for CT image reconstruction to produce CT images with a very low noise level, even at low radiation dose. The aim of this study was to assess whether the DLIR algorithm reduces the CT effective dose (ED) and im-proves CT image quality in comparison with filtered back projection (FBP) and iterative reconstruction (IR) algorithms in intensive care unit (ICU) patients. We identified all consecutive patients referred to the ICU of a single hospital who underwent at least two consecutive chest and/or abdominal contrast-enhanced CT scans within a time period of 30 days using DLIR and subsequently FBP or IR algorithm (Advanced Mod-eled Iterative Reconstruction model-based algorithm [ADMIRE], or Adaptive Iterative Dose Reduction 3D [AIDR 3D]) for CT image reconstruction. The radiation ED, noise level, and signal-to-noise ratio (SNR) were compared between the different CT scanners. The non-parametric Wilcoxon test was used for statistical comparison. Statistical significance was set at p < 0.05. A total of 83 patients (mean age, 59 ± 15 years [standard deviation]; 56 men) were included. DLIR vs FBP reduced ED (18.45 ± 13.16 mSv vs 22.06 ± 9.55 mSv, P < 0.05), while DLIR vs FBP and vs ADMIRE and AIDR 3D IR algorithms reduced image noise (8.45 ± 3.24 vs 14.85 ± 2.73 vs 14.77 ± 32.77 and 11.17 ± 32.77\, P < 0.05) and increased SNR (11.53 ± 9.28 vs 3.99 ± 1.23 vs 5.84 ± 2.74 and 3.58 ± 2.74, P < 0.05). CT scanners employing DLIR reduced radiation ED and im-proved SNR compared to CT scanners using FBP, whereas CT scanners using DLIR improved SNR com-pared to CT scanners using FBP or IR algorithms in ICU patients.