Citrus waste has been used as a source of bioplastic research in different ways. Because the juice industry produces significant amounts of residue each year, it would be advantageous to use the byproducts in the creation of new materials. For many years, researchers have been investigating an environmentally friendly way to take citrus and other organic waste and turn it into polymers that may be used, for instance, to produce bio-based and biodegradable films for food packaging. The goal of this study is to create biofilms from orange (OW) and ginger waste (GW) using an ultrafine grinder and study the films' properties. Since pectin has the ability to gel and because cellulosic fibres are strong, citrus waste has been studied for its potential to produce biofilms. After being washed, dried, and milled, orange and ginger waste were shaped into films using a casting process. Tensile testing was used to determine the mechanical properties of biofilms, while dynamic mechanical thermal analysis (DMTA), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC) were used to determine their thermal properties. As the number of grinding cycles increased, the suspension's viscosity increased from 29 to 57 mPa.s for OW and from 217 to 376 mPa.s for GW while the particle size in the suspension significantly decreased. For OW and GW films, the highest tensile strength was 17 MPa and 15 MPa, respectively. The maximum strain obtained among all films was 4.8%. All the tested films were stable up to 150°C, and maximum degradation occurs after 300°C.

This study aims to investigate the interfacial tension, emulsion stability, and the impact on oil displacement effectiveness of mixed systems containing nonionic surfactants and amphoteric surfactants at different ratios. To achieve this, three different emulsion stability formulations were prepared by mixing betaine and nonionic surfactants in ratios of 1:1, 3:2, and 3:1 respectively. By adjusting the proportions of betaine and nonionic surfactants, variations in interfacial tension and emulsion formation among the three mixed systems were studied to analyze the mechanism of interaction between betaine and nonionic surfactants and evaluate their effects on crude oil displacement and enhanced oil recovery in reservoirs. Subsequently, microscopic and macroscopic oil displacement experiments were conducted on the three mixed systems, along with experiments on emulsion flow resistance. The aim was to verify the oil displacement effectiveness of different mixed systems and further understand their potential applications in reservoirs. By comprehensively analyzing the experimental results, optimal ratios and conditions for the mixed systems were determined. The experimental results indicate that the emulsification system formed by mixing betaine and nonionic surfactants at a ratio of 3:1 achieves molecular synergies through electrostatic interactions and mixed adsorption with betaine, resulting in a compact arrangement of interface membranes and demonstrating a synergistic effect in reducing interfacial tension to an ultra-low value of 10 -4 mN/m. Additionally, as the proportion of betaine surfactant increases, the viscosity of the aqueous phase liquid film increases, the rate of thinning of the liquid film slows down, the rate of water release slows down, and the stability of the emulsion increases. Microscopic oil displacement experiments verified that the three mixed systems increase oil washing efficiency through low interfacial tension and emulsification stripping action, thereby increasing the oil displacement mechanism's coefficient. Emulsion flow resistance experiments demonstrated that as the proportion of betaine surfactant increases, the system exhibits better plugging ability. However, macroscopic oil displacement experiments revealed differences in compatibility between different emulsion stability solutions and rocks with different permeabilities. The mixed system of betaine and nonionic surfactants at a ratio of 3:1 exhibits the best emulsification plugging ability in rocks with a permeability of 109mD, while the 1:1 mixed system performs best in rocks with a permeability of 12mD. This holds significant theoretical and practical significance for reservoir development and enhanced production.

In this paper, we consider a class of bilevel programming problems (abbreviated as, BLPP). Exploiting the generalized approximate convexity assumptions, we investigate the relations among the solutions of approximate Minty (respectively, Stampacchia) type variational inequalities (abbreviated as, AMTVI (respectively, ASTVI)), and the local ϵ-quasi solutions of the BLPP. Moreover, by employing the generalized Knaster–Kuratowski–Mazurkiewicz (abbreviated as, KKM)-Fan’s lemma, we derive some existence results for the solutions of approximate variational inequalities (abbreviated as, AVI), namely, AMTVI and ASTVI. A non-trivial example is given to highlight the importance of the established results. To the best of our knowledge, there is no research paper available in the literature that establishes relationships between the AVI and the BLPP under the assumptions of generalized approximate convexity in terms of limiting subdifferentials.

Approximate unlearning is an emerging field in machine learning that addresses the challenge of efficiently removing specific data points from models without the need for full retraining. In the financial sector, where models are built on sensitive customer data and market information, the ability to unlearn data is crucial for meeting privacy regulations like GDPR and ensuring model adaptability in real-time environments. This paper explores the categorization of approximate unlearning into two main approaches: data-driven approximation and model-driven approximation. Data-driven approximation focuses on selectively retraining parts of the dataset to simulate the removal of data, while model-driven approximation adjusts the model’s internal parameters to nullify the influence of unwanted data points. Both methods offer computational and memory-efficient ways to balance the need for privacy compliance with the performance demands of financial models. The paper discusses practical applications in algorithmic trading, fraud detection, and risk assessment, and highlights the challenges associated with each approach. Through case studies and literature references, we demonstrate how approximate unlearning can be applied to maintain system efficiency, data privacy, and regulatory compliance in the financial domain. This research provides a roadmap for future developments in approximate unlearning, particularly in the context of real-time financial systems and federated learning environments.

With the ongoing amendment of the EU legislation on the treatment of urban wastewater, stricter requirements for the removal of pollutants are expected, which calls for the need for innovative wastewater treatment technologies. Biological systems are still the first choice. The survey of typical bioreactors applied in wastewater treatment is presented. Wastewater treatment objective, bio-chemical environment and microbial growth are selected as a main criterion for classification of these bioreactors. Hydraulic and kinetic aspects are considered, advantages and drawbacks of these bioreactors regarding the selection of appropriate type of the reactor as well as regarding operation of reactors are mentioned. The aim of this paper is to provide operators and designers with a brief overview of selected traditional and advanced processes, reactors, and technologies for nutrient removal from municipal wastewater. Another goal is to discuss the possibilities and limitations to comply with more strict effluent standards. From the evaluation of the published papers, it follows that the currently applied traditional methods of nutrients removal have the potential to convey also with the expected stricter limits.

Causality is the most important topic in the history of Western Science, and since the beginning of the statistical paradigm, it meaning has been reconceptualized many times. Causality entered into the realm of multi-causal and statistical scenarios some centuries ago. Despite of widespread critics, today Deep Learning and Machine Learning advances are not weakening causality but are creating a new way of finding indirect factors correlations. This process makes possible us to talk about approximate causality, as well as about a situated causality.

This report discusses the application of approximate dynamic programming (ADP) and Krylov subspace methods in solving sequential decision-making problems in machine learning. ADP is used when dealing with large state spaces or when the exact dynamics are unknown. The paper explores various ADP methods such as temporal difference learning and least-squares policy evaluation. The authors also focus on the use of Krylov subspace methods for solving the Bellman equation in ADP. The report provides insights into linear approximation, stochastic algorithms, and the Arnoldi algorithm for orthonormal basis. Overall, the paper highlights the theoretical foundation provided by ADP and its connection with Krylov subspace methods, shedding light on their application in computer science.

Carbon dioxide (CO2)miscible fracturing huff and puff technology plays a pivotal role in enhancing the recovery rate of crude oil, particularly in reservoirs with challenging physical properties, strong water sensitivity, high injection pressure, and complex water injection dynamics. In this study, the oil-increasing mechanism and huff and puff effect of CO2 miscible fracturing fluid are investigated through a comprehensive experimental approach. Specifically, experiments on PVT gas injection expansion, minimum miscible pressure, and CO2 miscible fracturing huff and puff are conducted on the G fault block reservoir in J Oilfield. The findings demonstrate that injecting CO2 into reservoirs leads to oil volume expansion, viscosity reduction, and saturation pressure increase. Additionally, the inclusion of solubilizers and viscosity reducers further enhances the efficiency of crude oil extraction. Solubilizers not only improve oil recovery but also reduce the minimum miscible pressure required for effective CO2 dispersion. Furthermore, the shut-in time, permeability, and huff and puff method all have considerable impacts on huff and puff recovery rate. This study offers valuable technical insights, supporting the application of CO2 miscible fracturing huff and puff technology to enhance oil recovery in low-permeability reservoirs.

Let $(\{f_j\}_{j=1}^n, \{\tau_j\}_{j=1}^n)$ and $(\{g_k\}_{k=1}^n, \{\omega_k\}_{k=1}^n)$ be two p-orthonormal bases for a finite dimensional Banach space $\mathcal{X}$. If $ x \in \mathcal{X}\setminus\{0\}$ is such that $\theta_fx$ is $\varepsilon$-supported on $M\subseteq \{1,\dots, n\}$ w.r.t. p-norm and $\theta_gx$ is $\delta$-supported on $N\subseteq \{1,\dots, n\}$ w.r.t. p-norm, then we show that \begin{align}\label{ME} &o(M)^\frac{1}{p}o(N)^\frac{1}{q}\geq \frac{1}{\displaystyle \max_{1\leq j,k\leq n}|f_j(\omega_k) |}\max \{1-\varepsilon-\delta, 0\},\\ &o(M)^\frac{1}{q}o(N)^\frac{1}{p}\geq \frac{1}{\displaystyle \max_{1\leq j,k\leq n}|g_k(\tau_j) |}\max \{1-\varepsilon-\delta, 0\},\label{ME2} \end{align} where \begin{align*} \theta_f: \mathcal{X} \ni x \mapsto (f_j(x) )_{j=1}^n \in \ell^p([n]); \quad \theta_g: \mathcal{X} \ni x \mapsto (g_k(x) )_{k=1}^n \in \ell^p([n]) \end{align*} and $q$ is the conjugate index of $p$. We call Inequalities (\ref{ME}) and (\ref{ME2}) as \textbf{Functional Donoho-Stark Approximate Support Uncertainty Principle}. Inequalities (\ref{ME}) and (\ref{ME2}) improve the finite approximate support uncertainty principle obtained by Donoho and Stark \textit{[SIAM J. Appl. Math., 1989]}.

This paper introduces a novel 3D NoC router that combines buffered and bufferless routing with approximate priority comparison when deflecting flits. Our proposal is a modification of an asymmetrical router that is buffered in the z dimension ports and bufferless in the x and y dimension ports. Flits that request output ports in the x and y dimensions are granted or deflected based on approximate, instead of accurate, priority comparison. Experimental results show that the proposed router, besides effectively combining the advantages of both buffered and bufferless routers, it achieves additional performance and area gains due to the reduced logic required for approximate priority comparison in flit deflections. Experimental results using synthetic and realistic traffic show that the proposed router begins to saturate at a sifnificantly higher injection rate than a bufferless router, but at a slightly lower injection rate than when using accurate priority comparison. Furthermore, the proposed router achieves higher clock frequencies and reduced area compared to the simpler permutation network.

The present study deals with the transplantation of mature Argan trees (Argania spinosa L. Skeels) and focuses on optimizing survival rates depending on the seasons, the type of shoot pruning applied to the trees and preconditioning treatments consisting of root pruningand watering for a few months before transplanting. So far, the transplantation of this species at the adult stage has not received enough attention in spite of its ecological and socio-economic importance for the regions where it thrives. The results obtained show that transplanting in summer, autumn and winter resulted in survival rates exceeding 50%. The Argan trees transplanted in spring hardly achieved 10% survival. However, the total cutback of the crown induced survival improvement that reached a rate greater than 70% for summer, autumn and winter, and 50% for spring. Watering alone or combined with root pruning for 6 months helped improve the recovery rate but only when carried out in autumn with transplantation in spring. On the other hand, when these pre-treatments were applied in the spring to transplant the trees in summer, the recovery rate was not improved.

Iron is an essential nutrient for humans and microbes, such as bacteria. Iron deficiency occurs commonly in critically ill patients, but iron replacement therapy is not considered during the acute phase of critical illness, since it increases iron availability for invading microbes and oxidative stress. However, persistent iron deficiency in the recovery phase is harmful with potential adverse outcomes such as cognitive dysfunction, fatigue and cardiopulmonary dysfunction. Therefore, it is important to treat iron deficiency timely and efficiently. This article reviews current knowledge about iron-related biomarkers in critically ill patients and provides possible criteria to guide decision-making for iron supplementation in the recovery phase of critical illness.

To determine the photon emission or absorption probability for a diatomic system in the context of the semiclassical approximation it is necessary to calculate the characteristic canonical oscillatory integral which has one or more saddle points. Integrals like that appear in a whole range of physical problems, e.g. the atom-atom and atom-surface scattering and various optical phenomena. A uniform approximation of the integral, based on the stationary phase method is proposed, where the integral with several saddle points is replaced by a sum of integrals each having only one or at most two real saddle points and is easily soluble. In this way we formally reduce the codimension in canonical integrals of "elementary catastrophes" with codimensions greater than 1. The validity of the proposed method was tested on examples of integrals with three saddle points ("cusp" catastrophe) and four saddle points ("swallow-tail" catastrophe).

Nowadays, the identification and characterization of grapevine cultivars resilient to climate and water stress while preserving quality traits is crucial for the wine industry. Therefore, the objective of this work was to characterize according to their aromatic potential 9 white and 6 red minority cultivars recently recovered from Castilla-La Mancha region (Spain), subjected at two different water deficit regimes: rainfed, with subsistence irrigation, and irrigated. For this, the varietal aromatic potential index (IPAv) and the detailed aromatic composition were analyzed by HS-SBSE-GC/MS, in extracts of two different ph. For IPAv values, red varieties did not show a clear trend with respect to irrigation. However, in white minority varieties, higher values were obtained under irrigation conditions. Thus, a clear differentiation of the minority varieties in comparison to the references was observed, primarily attributed to the content of esters and acids, in both white and red varieties. A notable contrast was observed at different pH, indicating a greater extractability of certain compounds like linalool, under more acidic conditions. This suggests that some recovered minority cultivars could be promising for cultivation in semi-arid regions with limited water, contributing to the wine sector sustainability in the future.

The impulse of the Fourth Industrial Revolution is triggering the demand for few specific metals. These include copper, silver, gold, and platinum group metals (PGMs), with important applications in renewable energies, green hydrogen, and electronic products. However, the continuous extraction of these metals is leading to a rapid decline in their ore grades and, consequently, increasing the environmental impact of extraction. Hence, obtaining metals from secondary sources, such as waste electrical and electronic equipment (WEEE), becomes imperative for both environmental sustainability and ensuring availability. This recovery entails few problems such as allocation due to the simultaneous production of several metals, the use of non-renewable resources, and the exergy destruction during the life cycle of the metals. Therefore, this work analyses the waste printed circuit boards (PCBs) recycling process by proposing different exergy-based cost allocations for the mentioned metals, disaggregating the exergy cost into non-renewable and renewable, and considering the complete life cycle of metals with the Circular Thermoeconomics methodology. The results show a significant saving of non-renewable energy by using renewable energies in primary extraction (67-87%), recycling (97.6-98.5%), and renewable energies in recycling (98.7%, 99.0%), compared to conventional primary extraction. However, when considering the entire life cycle, between 47% and 53% of the non-renewable exergy is destroyed during recycling. Therefore, delaying recycling as much as possible would be the most desirable option for maximizing the use of non-renewable resources, which nature cannot replace in a short time.

Interval-valued functions have been widely used to accommodate data inexactness in optimization and decision theory. In this paper, we study interval-valued vector optimization problems, and derive their relationships to interval variational inequality problems, of both Stampacchia and Minty types. Using the concept of interval approximate convexity, we establish necessary and sufficient optimality conditions for local strong quasi and approximate $LU$-efficient solutions to nonsmooth optimization problems with interval-valued multiobjective functions.

This paper presents machine learning methods for approximate solutions of reaction-diffusion equations with multivalued interaction functions. This approach addresses the challenge of finding all possible solutions for such equations, which often lack uniqueness. The proposed method utilizes physics-informed neural networks (PINNs) to approximate generalized solutions.

We approximate the trigonometric function sine and cosine on the interval . This analysis provides two formulas to approximate sine and cosine. At first, we try to derive the formula which involves a square root, and then we derive another formula that does not require any use of a square root. Nevertheless, after deriving the procedure which requires no square root, we further try to increase its accuracy and then derive another formula that approximates trigonometric functions more accurately on the interval [0, pi/2]. So, this analysis provides mainly two types of procedures. One uses square roots, whereas the other does not. We also focus on ensuring the accuracy of these trigonometric functions in the interval [0,pi/2]. This accuracy analysis is portrayed using the graph. This graph shows the difference between the values generated by the functions defined here and the actual value of these functions. So, these graphs also indicate the error of these functions on that interval. Finally, we compare our approximation with the approximation formula of the 7th-century Indian Mathematician Bhaskara I.

Using coherent optical detection and digital signal processing, laser phase noise and equalization enhanced phase noise can be effectively mitigated using the feed-forward and feed-back carrier phase recovery approaches. In this paper, theoretical analyses of feed-back and feed-forward carrier phase recovery methods have been carried out in the long-haul high-speed n-level phase shift keying (n-PSK) optical fiber communication systems, involving a one-tap normalized least-mean-square (LMS) algorithm, a block-wise average algorithm, and a Viterbi-Viterbi algorithm. The analytical expressions for evaluating the estimated carrier phase and for predicting the bit-error-rate (BER) performance (such as the BER floors) have been presented and discussed in the n-PSK coherent optical transmission systems by considering both the laser phase noise and the equalization enhanced phase noise. The results indicate that the Viterbi-Viterbi carrier phase recovery algorithm outperforms the one-tap normalized LMS and the block-wise average algorithms for small phase noise variance (or effective phase noise variance), while the one-tap normalized LMS algorithm shows a better performance than the other two algorithms for large phase noise variance (or effective phase noise variance). In addition, the one-tap normalized LMS algorithm is more sensitive to the level of modulation formats.

We introduce and analyze conceptual approximations of the Boussinesq equation for horizontal unconfined aquifers during the pure drainage phase, without any reharge and zero-inflow conditions. We employ a variety of methods, which include wave solution, variable separation and series expansion to constract a new model and explore its behavior and performance against the Boussinesq equation and its exact (non-closed form) solution, at early and later times. The modeled non-linear forms are finally linearized concluding with explicit analytical expressions that incorporate most of the basic characteristics regarding the evolution of the water table and the outflow from the exact Boussinesq equation under different initial conditions. The endeavors of this work might be useful for theoretical and modeling purposes related to this problem.

The radio spectrum is a scarce and extremely valuable resource that demands careful real-time monitoring and dynamic resource allocation. Dynamic spectrum access (DSA) is a new paradigm for managing the radio spectrum, which requires AI/ML driven algorithms for optimum performance under rapidly changing channel conditions and possible cyber-attacks in the electromagnetic domain. Fast sensing across multiple directions using array processors, with subsequent AI/ML based algorithms for sensing and perception of the waveforms that are measured from the environment is critical for providing decision support in DSA. As part of directional and wideband spectrum perception, the ability to finely channelize wideband inputs using efficient Fourier analysis is much needed. However, a fine-grain fast Fourier transform (FFT) across a large number of directions is computationally intensive and leads to high chip area and power consumption. We address this issue by exploiting recently proposed approximate discrete Fourier transforms (ADFT) which has its own sparse factorization for real-time implementation at low complexity and power consumption. The ADFT is used to create a wideband multi-beam RF digital beamformer and temporal spectrum-based attention unit which monitors 32~discrete directions across 32~sub-bands in real-time using a multiplierless algorithm having low computational complexity. The output of this spectral attention unit is applied as a decision variable to an intelligent receiver that adapts its center frequency and frequency resolution via FFT channelizers that are custom-built for real-time monitoring at high resolution. This two-step process allows the fine-gain FFT to be applied only to directions and bands of interest as determined by the ADFT based low-complexity 2D spacetime attention unit. The fine-grain FFT provides a spectral signature that can find future use cases in neural network engines for achieving modulation recognition, IoT device identification, and RFI identification. Beamforming and spectral channelization algorithms, digital computer architecture, and early prototypes using a 32-element fully digital multichannel receiver and field programmable gate array (FPGA)-based high-speed software defined radio (SDR) is provided.

In the study of rough sets, there are many covering approximation spaces, how to classify covering approximation spaces has become a hot issue. In this paper, we propose concepts covering approximation $T_{1}$-space, $F-$symmtry, covering rough continuous mapping, covering rough homeomorphism mapping to solve this question. We also propose a new method for constructing topology in Theorem 5.1, and get the following properties: (1) For each $x\in U$, $\{X_{i}:i\in I\}\subseteq \mathcal{P}(U)$ is all the subsets of $U$ which contains $x$ and $*$ is a reflexive relation on $U$. If $V\in \tau$ is a subset of $U$ and $x\in V$, then $\underline{*}(\bigcap \limits_{i\in I}X_{i})$ is the smallest subset of $U$ and $x \in \underline{*}(\bigcap \limits_{i\in I}X_{i})\subseteq V$. Denoted by $C(x)=\bigcap \{\underline{*}(X_{i}):x\in \underline{*}(X_{i}),i\in I\}$. (2)If $V\in \tau$ is a subset of $U$, then $V =$ $\bigcup \limits_{x\in V} C(x)$. (3) Let $\{\underline{*}(X_{i}):x\notin \underline{*}(X_{i}), i\in I\}$, then $\overline{\{x\}}$ $=$ $U \setminus \bigcup \limits_{x\notin \underline{*}(X_{i}), i\in I}\underline{*}(X_{i})$; (4) Let $*$ be a reflexive relation on $U$. For every $X\subseteq U$, we have $int(\underline{*}(X))=\underline{*}(X)$. Where $int(\underline{*}(X))$ represents the interior of $\underline{*}(X)$. (5) Let $\{\underline{*}(X_{i}):x\in \underline{*}(X_{i}),i\in I\}$ be a family subsets of $U$, then $\{\underline{*}(X_{i}):x\in \underline{*}(X_{i}),i\in I\}$ is a base for $(U,\tau)$ at the point $x$. \\

Increased wildfire activity is the most significant natural disturbance affecting forest ecosystems, with a strong impact on their natural regeneration. This study presents a comprehensive analysis of post-fire forest recovery using Landsat time series data from 2000 to 2023 in the Middle Volga region of the Russian Federation. The analyses utilised the LandTrendr algorithm in Google Earth Engine (GEE) cloud computing platform to examine Normalized Burn Ratio (NBR) spectral metrics and quantify the forest recovery at low, moderate, and high burn severity (BS) levels. To assess the spatio-temporal trends of the recovery, the Mann–Kendall statistical test and Theil–Sen’s slope estimator was applied. The results suggested that the post-fire spectral recovery is significantly influenced by the degree of the BS on affected areas. The higher the class of BS, the faster and more extensive the reforestation of the area occurs. About 91% (40,446 ha) of the first 5-year forest recovery after the wildfire belong to the BS classes of moderate and high severity. A regression model showed that land surface temperature (LST) was more significant to post-fire recovery than the variability in precipitation (Pr), explaining about 65% of the variance in post-fire recovery. This study provides new insights into the post-fire forest recovery dynamics and scientific bases for the cost-effective management strategies under changing climate conditions.

The fractional reduced differential transform method is a finite iterative method based on infinite fractional expansions. The result obtained is the approximation of the real value. There are few reports on the approximate error and the applicable condition. In this paper, according to the fractional expansions, we study the factors related to the approximate errors. Our research shows that the approximate errors relate not only to fractional order but also to time $t$ and increase rapidly with time $t$. This method can only be applied within a certain time range and the time range is relevant to fractional order and fractional expansions. Then, many obtained achievements may be incorrect if the applicable conditions are not satisfied. Some examples presented in this paper verify our analysis.

Linear mixed models are frequently used for analysing heterogeneous data in a broad range of applications. The restricted maximum likelihood method is often preferred to estimate co-variance parameters in such models due to its unbiased estimation of the underlying variance parameters. The restricted log-likelihood function involves log determinants of a complicated co-variance matrix. An efficient statistical estimate of the underlying model parameters and quantifying the accuracy of the estimation requires the first derivatives and the second derivatives of the restricted log-likelihood function, i.e., the observed information. Standard approaches to compute the observed information and its expectation, the Fisher information, is computationally prohibitive for linear mixed models with thousands random and fixed effects. Customized algorithms are of highly demand to keep mixed models analysis scalable for increasing high-throughput heterogeneous data sets. In this paper, we explore how to leverage an averaged information splitting technique and dedicate matrix transform to significantly reduce computations and to accelerate computing. Together with a fill-in reducing multi-frontal sparse direct solver, the averaged information splitting approach improves the performance of the computation process.

Despite being stored at 113 K and atmospheric pressure, LNG cold potential is not exploited to reduce green ships’ energy needs. An innovative system based on three Organic Ranking Cycles integrated into the regasification equipment is proposed to produce additional power and recover cooling energy from condensers. A first-law analysis identified ethylene and ethane as suitable working fluids for the first and the second ORC making available freshwater and ice. Propane, ammonia and propylene could be arbitrarily employed in the third ORC for air-conditioning. An environmental analysis that combines exergy efficiency, ecological indices and hazard aspects for marine environment and ship’s passengers, indicated propylene as safer and more environmentally friendly. The exergy analysis confirms more than 20% of the LNG potential can be recovered from every cycle to produce a net clean power of 76 kW, whereas 270 kW can be saved by recovering condensers' cooling power to satisfy some ship needs. Assuming the sailing mode, a limitation of 162 kg in LNG consumptions was determined, avoiding the emission of 1584 kg of CO2 per day. Marine thermal pollution is reduced by 3.5 times by recovering the working fluids' condensation heat for the LNG pre-heating.

Precision metagenomic approaches using Oxford Nanopore Technology (ONT) sequencing has been shown to allow recovery of complete genomes of Escherichia coli O157:H7 from overnight enrichments of agricultural waters. This study tests the applicability of a similar approach for Cronobacter genome recovery from powdered infant formula (PIF) overnight enrichments, where Cronobacter typically dominates the overall microbiome (>90%). In this study, we aimed to test whether using ONT sequencing of overnight PIF enrichments could recover a completely closed Cronobacter genome for further genomic characterization. Ten PIF samples, each inoculated with different Cronobacter strains, covering Cronobacter sakazakii, C. muytjensii, C. dublinensis, C. turicensis, and C. universalis, were processed according to the Bacteriological Analytical Manual (BAM) protocol. qPCR was used for initial screening (detection and quantification) of the overnight enrichments and confirmed that the spiked PIF samples after the overnight enrichment have high levels of Cronobacter (107 to 109 CFU/mL). DNA from overnight PIF enrichments was extracted from the enrichment broth and sequenced using ONT. Results showed that ONT sequencing could accurately identify, characterize, and close the genomes of Cronobacter strains from overnight PIF enrichments in 3 days, much faster than the nearly two weeks required by the current BAM method. Complete genome recovery and species differentiation were achieved. This suggests that combining qPCR with ONT sequencing provides a rapid, cost-effective alternative for detecting and characterizing Cronobacter in PIF, enabling timely corrective actions during outbreaks.

The COVID-19 pandemic has profoundly disrupted small businesses, exacerbating financial vulnerabilities and operational challenges. As these enterprises play a crucial role in economic stability and growth, identifying effective recovery strategies is imperative. This study investigates the legal and management solutions necessary for small businesses to recover and thrive post-pandemic. The research aims to examine the economic impact of the COVID-19 pandemic on small businesses, evaluate the effectiveness of existing legal and governmental support measures, and propose management strategies that enhance resilience and drive recovery. A mixed-methods approach was adopted, comprising both quantitative and qualitative analyses. A survey was conducted with 500 small businesses across various sectors to collect data on financial performance, operational disruptions, and the utilization of government support programs. Additionally, 30 in-depth interviews with small business owners provided qualitative insights into adaptive strategies and challenges faced. A review of relevant legal documents and policy frameworks was also performed to assess the support mechanisms in place. The study revealed that 68% of small businesses experienced substantial revenue losses, with 50% encountering severe liquidity crises. Government support measures, such as grants and low-interest loans, were pivotal but often marred by accessibility issues and delays. Successful management strategies identified included accelerating digital transformation, diversifying revenue streams, and optimizing supply chain management. Legal measures that temporarily eased regulatory requirements and offered tax relief significantly aided in alleviating immediate pressures. The economic recovery of small businesses post-COVID-19 hinges on comprehensive legal and management solutions. Enhancing the effectiveness and reach of government support programs is crucial, as is the adoption of agile and innovative management practices by small businesses. Policymakers and business leaders must work collaboratively to create an environment that fosters resilience and sustainable growth, ensuring small businesses can navigate future economic uncertainties.

The organic material present at the same depth in the reservoir has the potential for conversion, as indicated by analyses conducted before and after combustion in the development of heavy oil. This paper examines the oxidation and pyrolysis reaction pathways of hydrocarbons, specifically benzaldehyde (C₇H₆O) and naphthalene (C₁₀H₈), before and after combustion using molecular dynamics simulations. The primary products formed under various temperature conditions include H₂O, HO₂, CO, and CO₂. The discussion includes the number of molecules, such as HO and H, as well as their temperature variations. The activating group functions as an electron donor, while the inactivating group serves as an electron acceptor. The oxidation and pyrolysis reactions of naphthalene and the synthesis pathway of benzaldehyde are also explored. The C-C dissociation pathway in the early stages of combustion and the process of C-C bond synthesis in the later stages of the reactions are investigated through dynamic simulations at different temperatures: 3000 K, 3500 K, and 4000 K, with a particular focus on the reaction network at 4000 K. The application of the molecular reaction dynamics method to heavy oil combustion research is the primary objective of this work. This study aims to provide a novel approach to investigating hydrocarbon conversion at high temperatures and offers recommendations for enhanced oil recovery.

Counter-current spontaneous imbibition of water is a critical oil-recovery mechanism. In the laboratory, the Amott test is a widely used technique to assess efficacy of brine imbibition into oil-saturated core plugs. The classic Amott-cell methodology was designed to estimate ultimate oil recovery, but not the recovery dynamics that provides essential information about the imbibition mechanisms. Retention of oil droplets at the external core surface and delayed onset of oil production are the two key artifacts of the classic Amott experiment. This retention, referred to here as the ``external-surface oil holdup effect'', often results in stepwise recovery curves that obscure true dynamics of spontaneous imbibition. To address these holdup drawbacks of the classic Amott method, we modified the Amott cell and experimental procedure. For the first time, using water-wet Indiana limestone cores saturated with brine and mineral oil, we showed that our improvements of the Amott method enabled accurate and reproducible measurements of oil-recovery dynamics. We used the Generalized Extreme Value (GEV) statistics to describe oil-production histories from water-wet heterogeneous limestone cores with finite initial water saturations, for the first time. We demonstrated that our four-parameter GEV model accurately described the recovery dynamics, and that optimal GEV parameter values systematically reflected the key characteristics of the oil-rock system, such as oil viscosity and rock permeability. These findings gave us a more fundamental understanding of spontaneous, counter-current imbibition mechanisms and insights into what constitutes a predictive model of counter-current water imbibition into oil-saturated rocks with finite initial water saturation.

String matching is an important part in many real world applications. It must robust against variations in string field. In record linkage for two different datasets matching should detect two patients in common in spite of small variations. But it becomes difficult in case of confidential data because sometimes data sharing between organizations become restricted for privacy purposes. Several techniques have been proposed on privacy-preserving approximate string matching such as Secure Hash Encoding etc. Relative to other techniques for approximate string matching Homomorphic encryption is very new. In this paper we have proposed a Homomorphic Encryption based approximate string matching technique for matching multiple attributes. There is no solution currently available for multiple attributes matching using Homomorphic encryption. We have proposed two different methods for multiple attributes matching. Compare to other existing approaches our proposed method offers security guarantees and greater matching accuracy.

The application of evolutionary optimization algorithms in problem solving is currently gaining wide popularity. Use of Differential Evolution (DE) algorithm in obtaining analytically approximate solution of unstable second order initial value Ordinary Differential Equation (ODE) is presented in this work. The methodology involves solving an associated problem of optimization with con-strains to get an analytically approximate solution for the ODE under consider-ation. Three test cases were used to demonstrate the efficiency of our method. In comparison with other methods discussed in the literature, our method gave significant improvement on the accuracy of the obtained results.

In this paper a new approximate procedure is developed for calculating the inclination angle of the end points of statically determinate beams. The method is based on the topology comparison of simple (hinge-roller combination) supported beam and a resemblant cantilever beam. Assuming that the support reactions of the beam are active forces, the virtual displacements at the points of the reaction forces are calculated. Based on these values the inclination angle is calculated. Several examples are considered and the suggested in this paper, while the procedure is applied for various types of structures and loadings. The results, obtained by the suggested numerical procedure, are compared with analytical ones, and they are in good agreement.

The architectural configuration of the space plays a crucial role in the acoustics of Neonatal Intensive Care Units (NICUs). The design of the environment, the materials used in construction, and the organisation of noise sources within the room significantly influence the noise levels present in these critical areas. For this research, noise levels found in two hospitals, with different architectural configurations and sizes but similar construction materials, have been analyzed. Data were recorded at 1-second intervals over a period of more than 24 hours. The data collected in these hospitals confirm the magnitude of the noise problem in NICUs, highlighting the urgent need to address it effectively to ensure an appropriate and safe environment for the recovery of neonates. Good architectural planning can help mitigate noise, while poor configuration can exacerbate acoustic problems, negatively affecting both patients and healthcare staff. It is crucial to involve architects, acoustic engineers, and healthcare staff in the design and renovation of NICUs to create spaces that not only meet medical needs but also consider the auditory well-being of neonates.

This study evaluates the impact of a Project-Based Learning (PBL) intervention on post-pandemic educational recovery in rural Colombia, focusing on student competencies in mathematics, language, science, and 21st-century skills. Conducted in rural schools, the intervention aimed to address significant learning gaps exacerbated by the COVID-19 pandemic by providing teacher training and direct student support. A pretest-posttest single-group design was used to assess the effectiveness of the intervention, with standardized tests measuring academic competencies and an analytical rubric evaluating 21st-century skills. The results indicate significant improvements in math, language, and science test scores, with notable gains in problem-solving, collaborative work, communication, and critical thinking. However, a decline in creativity scores highlights the need for a stronger emphasis on fostering creativity within the PBL framework. Gender differences were observed, with female students generally outperforming males, suggesting the need for tailored instructional approaches. The study's limitations, including the absence of a control group, non-random sampling, and the use of subjective assessment methods, are acknowledged, with recommendations for future research to address these issues. Despite these limitations, the findings underscore the potential of PBL to enhance student learning outcomes in rural settings, offering valuable insights for educators and policymakers aiming to support educational recovery and development in similar contexts. Further research is recommended to explore the long-term effects of PBL and to refine the intervention for broader implementation.

This article develops duality principles applicable to originally non-convex primal variational formulations. More specifically, as a first application, we establish a convex dual approximate variational formulation for a non-linear Kirchhoff-Love plate model. The results are obtained through basic tools of functional analysis, calculus of variations, duality and optimization theory in infinite dimensional spaces. We emphasize such a convex dual approximate formulation obtained may be applied to a large class of similar models in the calculus of variations. Finally, in the last section, we present a duality principle and respective convex dual formulation for a Ginzburg-Landau type equation.

The security of several fully homomorphic encryption (FHE) schemes depends on the intractability assumption of the approximate common divisor (ACD) problem over integers. Subsequent efforts on solving the ACD problem as well as its variants were also developed during the past decade. In this paper, an improved orthogonal lattice (OL) based algorithm, AIOL, is proposed to solve the general approximate common divisor (GACD) problem. The conditions for ensuring the feasibility of AIOL are also presented. Compared to the Ding-Tao’s OL algorithm, the well-know LLL reduction is used only once in AIOL, and when the error vector r is recovered in AIOL, the possible difference between the restored and the true value of p is given. The experimental comparisons towards the Ding-Tao’s algorithm and ours are also provided for validating our improvements.

This article has two objectives. Firstly, we will use the vector variational-like inequalities problems to achieve local approximate (weakly) efficient solutions of Vector Optimization Problem within the novel field of the Hadamard manifolds. Previously, we will introduce the concepts of generalized approximate geodesic convex functions and illustrate them with examples. We will see the minimum requirements under which critical points, solutions of Stampacchia and Minty weak variational-like inequalities and local approximate weakly efficient solutions can be identified, extending previous results from the literature for linear Euclidean spaces. Secondly, we will show an economical application, using again solutions of the variational problems to identify with Stackelberg equilibrium points on Hadamard manifolds and under geodesic convexity assumptions.

Background: Vestibular Neuritis (VN) induces Acute Vestibular Syndrome (AVS). This study aimed to identify predictive factors of VN recovery by healing and/or compensation. Methods: In this longitudinal and prospective study, 40 patients were included. The first assessment (T0) included medical history taking (general and specific), for cardiovascular risk factors (CVRFs), a battery of diagnostic tests, bithermal caloric test (BCT), video Head Impulse Test (VHIT) and skull vibration induced nystagmus (SVIN). All patients also completed a Dizziness Handicap Inventory (DHI). All assessments were repeated 90±15 days (T3) later. Subjective criteria compensation were based on DHI total score and objective criteria compensation on the instrumental test results. Four groups of patients (A, B, C, D) were delineated by combining patients with normal vs abnormal vestibular tests and patients with normal vs abnormal DH. Results: CVRFs were associated with a poorer recovery of symptoms but not the age or BMI. Vestibular tests mainly BCT (canal paresis %), VHIT (lateral semicircular canal gain) and SVINT (nystagmus slow phase velocity) recovered within normal values in 20%, 20%, 26% of cases respectively at T3 for the 40-patient group. Conclusions: Vascular risk factors (hypercholesterolemia) are correlated with patients who do not recover their symptoms either by healing or compensation. The evolution did not show any significant difference between high or low frequency vestibular tests in patients recovering from their symptoms. However, some patients with objective recovery may continue to show persisting subjective symptoms.

This paper explores the application of machine learning (ML) in predicting functional recovery in patients with ischemic stroke. As technology advances, ML shows significant potential in the field of stroke medicine, especially in the areas of big data analytics and personalized medicine. Studies have shown that ML algorithms can improve the accuracy of stroke image analysis, subtype classification, risk assessment, treatment guidance, and prognosis prediction. However, the widespread use of ML still faces challenges such as data standardization, model validation, privacy, and bias. This paper reviews the current application status of ML in the field of stroke, discusses the challenges faced, and looks forward to the future development direction, aiming to promote the practical application of ML technology in the diagnosis and treatment of stroke to improve the prognosis and quality of life of patients.

For Convolutional Neural Network (CNN), Depthwise Separable CNN (DSCNN) is a preferred architecture for Application Specific Integrated Circuit (ASIC) implementation on edge devices. It can benefit from a multi-mode approximate multiplier proposed in this work. The proposed approximate multiplier uses two 4-bit multiplication operations to implement a 12-bit multiplication operation by reusing the same multiplier array. With this approximate multiplier, sequential multiplication operations are pipelined in a modified DSCNN to fully utilize the PE array in the convolutional layer. This Approximate (A-DSCNN) was implemented on TSMC 40-nm CMOS process with a supply voltage of 0.9 V. At the clock frequency of 200 MHz, the design achieves 4.78 GOPs/mW while occupying 1.24 mm x 1.24 mm silicon area. Compared to conventional DSCNN implemented in a similar process node, the chip area and power consumption were reduced by 53% and 25%, while the throughput was improved by 17%.

This article develops applications of the generalized method of lines to numerical solutions of the time-independent, incompressible Navier-Stokes system in fluid mechanics. We recall that for such a method, the domain of the partial differential equation in question is discretized in lines (or more generally in curves), and the concerning solutions are written on these lines as functions of the boundary conditions and the domain boundary shape.

Based on some geometrical properties of the Rabinovich system the closed-form solutions of the equations has been established. Moreover the Rabinovich system is reduced to a nonlinear differential equation depending on an auxiliary unknown function. The approximate analytical solutions are built using the Optimal Auxiliary Functions Method (OAFM). A good agreement between the analytical and corresponding numerical results has been performed. The accuracy of the obtained results emphasizes that this procedure could be successfully applied for more dynamical systems with these geometrical properties.

In order to achieve the dual carbon goal and simplify the decarbonization process, a CO2 recovery process of the fire-flooding exhaust was designed. The process adopted the two-stage membrane separation method to recover CO2 and obtain high purity CO2 rich flow, and then through the mixed refrigerant liquefaction and rectification column, food grade liquid CO2 was obtained. HYSYS process simulation shows that for the fire-flooding exhaust with a flow rate of 1000 kg/h and a given composition, the process can achieve a CO2 recovery of 69.02%, total product sales S=2086.8 yuan/h, and specific power consumption of 2.818 kW∙h/kg. On this basis, a hybrid simulation platform of HYSYS & Matlab was established. Taking the specific power consumption of the product as the objective function, sequential quadratic programming (SQP) algorithm was adopted to optimize the process, and the optimized specific power consumption was reduced by 18.8%. Finally, by adjusting N2/CO2 components, the adaptability of the optimization condition was analyzed.

A review discusses recent research findings spanning the last two decades concerning ultrasonic technologies applicable to the oil, gas, and coal sectors. Various experiments conducted in laboratories have demonstrated the efficacy, cost-effectiveness, and environmental friendliness of ultrasound in recovering and processing oil, bitumen, coal, and oil shale. Ultrasound enhances formation permeability, coal gas permeability, and oil viscosity, particularly when delivered in short, powerful pulses at medium frequencies. Combining ultrasound with traditional recovery methods has shown promising results, boosting recovery efficiency by up to 100%. At the same time, ultrasonic treatment reduces the use of traditional reagents, thereby reducing environmental pollution. Moreover, ultrasound treatment shows potential in tasks such as separating oil-water emulsions, desulfurization, dewaxing oil, coal enrichment, and extracting valuable metals from metal-bearing shales through hydrometallurgical leaching. However, widespread industrial implementation of ultrasonic technology necessitates further field and mathematical research.

A decanter centrifuge has been employed to successfully separated phosphoric acid and rare-earth-element (REE)-containing particles from phosphoric acid sludge with concentrations ranging from 1,000 to 2,200 ppm REEs. Operating efficiently with up to 35 wt.% solids, the centrifuge was demonstrated to achieve approximately 95% phosphoric acid recovery and 90% REEs recovery in a single pass, eliminating the need for additional processing steps. This breakthrough supports a proposed REEs oxide recovery process integrating phosphoric acid (PA), elemental phosphorus (P4), and REEs into two potential pathways: PA-REO and PA-P4-REO. These processes aim to reintroduce recovered phosphoric acid into the main product to significantly increase output and revenue. Post-separation, phosphorus-rich particles can be converted to P4, while REEs-containing solids undergo further treatment including acid leaching, extraction/stripping, precipitation, and calcination to produce a marketable rare-earth oxide (REO) material. Techno-economic analysis indicates promising profitability, with the PA-REO process showing a delta net present value (∆NPV) of $441.8 million and an expected return within a year of construction, while the PA-P4-REO process yields a ∆NPV of $178.7 million over a 12-year return period. Both pathways offer robust financial prospects and demonstrate the feasibility of commercial-scale REEs recovery from phosphoric acid sludge.

This work emphasizes some geometrical properties of the Maxwell--Bloch equations. Based on these properties the closed-form solutions of their equations are established. Thus, the Maxwell-Bloch equations are reduced to a nonlinear differential equation depending on an auxiliary unknown function. The approximate analytical solutions were built using the Optimal Homotopy Asymptotic Method (OHAM). A good agreement between the analytical and corresponding numerical results was found. The accuracy of the obtained results is validated through the representative figures. This procedure could be successfully applied for more dynamical systems with geometrical properties.

The famous singlet correlations of a composite quantum system consisting of two spatially separated components exhibit notable features of two kinds. The first kind consists of striking certainty relations: perfect correlation and perfect anti-correlation in certain settings. The second kind consists of a number of symmetries, in particular, invariance under rotation, as well as invariance under exchange of components, parity, or chirality. In this note, I investigate the class of correlation functions that can be generated by classical composite physical systems when we restrict attention to systems which reproduce the certainty relations exactly, and for which the rotational invariance of the correlation function is the manifestation of rotational invariance of the underlying classical physics. I call such correlation functions classical EPR-B correlations. It turns out that the other three (binary) symmetries can then be obtained "for free": they are exhibited by the correlation function, and can be imposed on the underlying physics by adding an underlying randomisation level. We end up with a simple probabilistic description of all possible classical EPR-B correlations in terms of a "spinning coloured disk" model, and a research programme: describe these functions in a concise analytic way.

The formation of hydrogen sulfide (H₂S) in petroleum reservoirs by anaerobic microbial activity is called biogenic souring of reservoirs and is a risk in the oil and gas industry as the compound is extremely toxic, flammable and corrosive. In this paper, we present a workflow and the tools to assess biogenic souring from a pragmatic engineering perspective. The retention of H₂S in the reservoir due to the reactions with iron-bearing rock minerals (e.g. siderite) is shown in a theoretical approach here and supported with literature data. Cases are given for two fields under secondary (waterflooding) and tertiary flooding with microbial enhanced oil recovery (MEOR). The use of the Monte Carlo method as a numerical modelling tool to incorporate uncertainties in the measured physical/chemical/ biochemical data is demonstrated as well. A list of studies conducted with different chemicals alone or in combination with various biocides to mitigate biogenic souring provides an overview of potential inhibitors as well as possible applications. Furthermore, the results of static and dynamic inhibition tests using molybdate are presented in more detail due to its promising mitigation ability. Finally, a three-step workflow for the risk assessment of biogenic souring and its possible mitigation is presented and discussed.

Inadequately managed agricultural waste significantly impacts the environment, health, and economy. This form of pollution arises from the underutilization, poor awareness, and insufficient treatment of agricultural waste. Fruit and vegetable wastes are valuable sources of bioactive compounds. This study aims to revalorize discarded waste from red habanero chili peppers (Capsicum chinense) by extracting bioactive compounds through different extraction processes: maceration (ME), maceration assisted by ultrasound (US), Soxhlet extraction (SE), supercritical fluid extraction (SFE), and supercritical fluid extraction with a co-solvent (SFEC). Extraction processes have significant effects on extraction efficiency and phytochemical profile (capsaicinoids and carotenoids recovery). The results indicate that the highest efficiency process is obtained with SFEC, also a high phytochemicals recovery (14.9 mg of total capsaicinoids and total carotenoids 292.09 µg per gram of sample). Concerning to phytochemical profile in the extract, the maceration process gets the highest concentration of compound followed by US and SFEC. These data reveal that the use of SFE and SFEC extraction is recommended for extraction of phytochemicals with biologically activity from red habanero chili pepper waste for diverse industries application.

Approximate entropy (ApEn) and sample entropy (SampEn) are statistical indices designed to quantify the regularity or predictability of time series data. Although ApEn has been a prominent choice for use in the analysis of non-linear data, it is currently unclear as to which method and parameter selection combination is optimal for its application in biomechanics. The goal of this research was to examine the differences between ApEn and SampEn related to center of pressure (COP) data during tandem standing balance tasks, while also changing the tolerance window, r. Six participants completed five, 30-second trials, feet-together and tandem standing with eyes-open and eyes-closed. COP data (fs = 60 Hz, downsampled from 1200 Hz) from ground reaction force platforms were collected. ApEn and SampEn were calculated using a constant vector length, i.e., m = 2, but differing values of r (tolerance window). For each of the participants, four separate one-way analysis of variance analyses (ANOVA) were conducted for ApEn and SampEn in the anterior-posterior (AP) and medial-lateral (ML) directions. Dunnett's intervals were applied to the one-way ANOVA analyses to determine which tandem conditions differed significantly from the baseline condition. ApEn and SampEn provided comparable results in the predictability of patterns for different stability conditions, with increasing instability, i.e., tandem eyes closed postures, being associated with greater unpredictability. The selection of r had a relatively consistent effect on mean ApEn and SampEn values across r = 0.15 * SD to r = 0.25 * SD, where both entropy methods tended to decrease as r increased. Mean SampEn values were generally lower than ApEn values. The results suggest that both ApEn and SampEn indices demonstrated relative consistency and were equally effective in quantifying the level of the center of pressure signal regularity during quiet tandem standing postural balance tests.

The phenomenon of vaccine hesitancy is a growing threat to public health with far-reaching implications. The widening gap between the vaccinated and the proportion needed for herd immunity raises two critical research questions that are of interest to practitioners, researchers, and policymakers: (1) What determines one’s decision to be vaccinated? and (2) What is the implication of COVID-19 vaccine hesitancy on economic recovery? In this study, we use empirical data in the context of South Africa to investigate factors affecting COVID-19 vaccine hesitancy and their implications for economic recovery. Findings reveal key socio-demographic and institutional drivers of COVD-9 vaccine hesitancy, which include age (the youth are more hesitant), inadequate information on the vaccine (those who perceive they have adequate information are vaccinated), trust issues in government institutions, conspiracy beliefs, vaccine-related factors, and perceived side effects associated with the vaccine. Additionally, an individual’s decision to remain hesitant about COVID-19 vaccination has implications for businesses and the economy by limiting movement and trade, increasing unemployment, and causing a resurgence of new variants. Based on the findings, action plans such as information dissemination, convenience vaccination centers, consistency communications, and targeted campaign strategies are recommended for improving vaccine intakes and a positive economic recovery.

Abstract: Short-chain fatty acids (SCFAs) are the major microbial metabolites produced in the gut through the fermentation of non-digestible fibers. SCFAs act through free fatty acid receptor 2 and 3 (FFAR2 and 3), which are known to be expressed on glucagon-like peptide-1 (GLP-1)-secreting L-cells. This pathway is suggested to protect the intestinal mucosa. We aimed to investigate how lack of fiber affects the production of SCFAs and the vulnerability of the co-lon. Additionally, the involvement of FFAR2 and 3 in GLP-1 secretion and intestinal protection. SCFA concentrations in luminal contents from chow- or fiber-free diet-fed mice were analysed by LC‒MS. SCFAs were applied to isolated perfused colons from FFAR2/3 double KO and WT mice, and the secretion of GLP-1 was measured. Dextran sulfate sodium (DSS) colitis was induced in chow- or fiber-free diet-fed mice as well as in FFAR2/3 KO and WT mice. The removal of die-tary fiber significantly decreased total colonic SCFA concentrations, with specific decreases in acetate, propionate, and butyrate. SCFAs significantly increased colonic GLP-1 secretion but not in FFAR2/3 KO mice. In the DSS model, the removal of dietary fiber increased the severity and delayed recovery. Colitis severity was independent of FFAR2 and FFAR3 signaling.

In this work, studies were carried out on the extraction of silver and gold from cakes of pressure oxidation leaching of sulfide concentrate containing pyrite and arsenopyrite. The addition of gypsum at a consumption of 0.1 g/g of concentrate helps to increase silver extraction from 13.4 to 95–98% at the cyanidation stage, with no conditioning operation. Gold recovery was 99%. An increase in gypsum consumption contributes to the formation of BFAS with an increased content of sulfate sulfur, and a decrease in the As/S(sulfate) molar ratio in the cake from 3.7 down to 0.88 contributes to an increase in silver extraction at the cyanidation stage up to 98%, and its further decrease from 0.88 down to 0.58 leads to a gradual reducing silver transfer into solution from 98 down to 75.1% at the cyanidation stage. Basic ferric sulfate (BFS) is not formed in this case, since according to EDS mapping the distribution of arsenic and sulfur over iron-containing particles is uniform. According to TCLP analysis, the cake obtained after pressure oxidation leaching with the addition of gypsum and cyanidation is stable and suitable for disposal, since the final concentration of arsenic in the solution was 0.45 mg/dm3.

In this paper, a further mathematical analysis of some previous results of the author’s ongoing investigation regarding Prandtl’s equations is accomplished. In particular, the objective of the present work is the performance of an approximate explicit solution to Prandtl’s system of equations for a laminar, isothermal, incompressible and steady boundary layer flow of a Newtonian fluid, over an infinite horizontal flat plate.

Recovery of forest after logging can be tested in many ways: the presence of particular species of fauna or flora, the similarity of the biodiversity of the recovering forest to that on neighbouring areas of undisturbed forest; or the characteristics of soils and streams whose conditions may have drastically changed during logging. Three cases of rainforest recovery after logging and clearance from Australia and Borneo exhibit different starting and different goals for recovery. Faunal indicators of recovery vary with size and with species dependence of the rainforest. Endemic forest species may have difficulty in recovering. Tree species richness and abundance may recover in two decades, but canopy closure takes longer. Compacted soils may retain low infiltration capacities for many decades. This diversity in recovery rates is confirmed when compared with those used elsewhere. Because the starting points for recovery vary, from damage by tropical cyclones and landslides, to clearance for shifting cultivation, pasture or agriculture, to post-logging conditions, universal indicators may be inappropriate. The desired endpoints of recovery also range from a “wilderness” state to a National Park for human enjoyment, biodiversity preservation, safeguarding rights of traditional forest-dwelling peoples, or a second round of selective logging.

This study presents preliminary findings on the physicochemical, calorific, and thermal properties of a newly discovered coal from Obomkpa town in Aniocha-North Local Government Area of Delta State in Nigeria. The Obomkpa (BMK) coal sample was subjected to fuel characterisation through ASTM standards and techniques for determining elemental, proximate, and calorific coal properties. The results indicated that BMK coal contains high carbon, oxygen, volatile matter, fixed carbon, and ash. The higher heating value of BMK was 19.66 MJ/kg, which indicates it could be ranked as either lignite A or subbituminous C coal. The thermal properties indicated that BMK experienced significant mass loss (M_L) under oxidative (combustion) and non-oxidative (pyrolysis) conditions due to thermal degradation of organic rock macerals (inertinite and vitrinite). Furthermore, BMK experienced mass loss (M_L=59.27%–76.56%) along with residual mass (R_M = 23.44–40.73%) under oxidative (combustion) and non-oxidative (pyrolysis) conditions. Thermal degradation occurred in three (3) stages; drying (30 °C to 200 °C), devolatilization (200 °C – 500 °C and 600 °C), and lastly, coke degradation and ash formation. Furthermore, the DTG peaks for the drying and devolatilization of BMK during the oxidative (combustion) process occurred at lower temperatures compared to the non-oxidative (pyrolysis) process. Hence, the results submit oxidative (combustion) is a more thermally efficient process compared to the non-oxidative (pyrolysis) process. Lastly, the findings indicate BMK is a potential feedstock material for future coal power generation, steel, iron ore or cement production.

With the developments of smart technologies, the use of rare earth elements (REEs) knows a widespread use, thus, their importance as valuable and strategic metals boosted to levels never known before. Due to their scarcity in Earth crust, the recovery of these elements from secondary resources also knows further developments. Traditional pyrometallurgical and hydrometallurgical processing, though of wide use, in the recovery of these REEs, have some environmental drawbacks, thus, the development of new recovery approaches are under developments. Here, Solvometallurgy appeared as a friendly environmental technology, and ionic liquids and deep eutectic solvents re-sulted as a first-row chemicals to be used in the different unit operations used in solvometallurgical processing: leaching, liquid-liquid extraction, ion exchange (adsorption), precipitation and elec-trolysis. This manuscript reviewed the most recent literature concerning the use of ionic liquids and deep eutectic solvents in the recovery of REEs from various sources.

This study assesses the biomethane (CH4) generation and greenhouse gas (GHG) emissions resulting from municipal solid waste landfilling in Phnom Penh, Cambodia, with a focus on the impact of fugitive CH4 emissions and operation processes in four landfilling scenarios: simple dumping (S1), improved management with leachate treatment (S2), engineered landfill with flaring (S3), and engineered landfill with energy recovery (S4). The study also considered the environmental benefits of carbon sequestration and landfill gas utilization. The LandGEM and IPCC FOD models were used to calculate CH4 generation over the period of 2009-2022, and it was found that approximately 18 and 21 M kg/year of CH4 are released, respectively. The energy potential from CH4 recovery was 51–61 GWh/year. Overall GHG emissions in S2 were the highest, amounting to 409–509 M kg CO2-eq/year, while S1 had lower emissions at 397–496 M kg CO2-eq/year. Flaring captured CH4 in S3 could reduce GHG emissions by at least 55%, and using captured CH4 for electricity production in S4 could mitigate at least 83% of GHG emissions. Electricity recovery (S4) could avoid significant amounts of GHG emissions (˗104.5 kg CO2-eq/tMSW). The study suggests that landfill gas-to-energy could significantly reduce GHG emissions.

The coronavirus pandemic will deeply affect the tourism and travel sector. It is already clear now that its economic impact would be more severe that in the case of the Severe Acute Respiratory Syndrome (SARS) in 2002-2003. Although not as deadly as SARS, coronavirus infection has a longer incubation period and leaves about 85% of the infected without any (or with just mild) symptoms which makes it more difficult to track and to contain. Moreover, it appears to be much more contagious than its predecessor. The goods news is that most people recover from the disease and develop antibodies that can protect them from getting infected again (natural vaccination). Those cured might become the key element for the post-virus recovery strategies of tourism organisations. People with the acquired immunity to the virus would be capable of travelling freely without spreading the disease. Airlines, hotels and gastronomy should aim at this group offering them discounts and special offers. However, the problem is how to effectively ensure that everyone who claims to be cured from COVID-19 is telling the truth. Health tracking bracelets, apps, and other advanced technological solutions should be put in place. Recent best practices from Hong Kong, mainland China, or India might be applied.

Recycling solar panels is crucial to mitigating the environmental impact of the growing volume of end-of-life photovoltaic waste and conserving valuable resources, while achieving high purity in recovered materials ensures their effective reuse in the manufacturing of new solar panels, con-tributing to a sustainable and circular economy. This study proposes a two-step leaching process to recover Ag and Al from the silicon fraction of EoL photovoltaics (PVs). In the first stage laboratory scale tests, 99% Al was extracted using 5% HCl at room temperature for 3 hrs. The Al was precip-itated as oxide from the solution. The silicon residue was then leached with 0.5 M HNO3 at 80°C for 2 hrs extracting 99% Ag and producing Si with 99.83% purity. The silver was precipitated to produce metallic Ag with >99.9% purity. Methods to mitigate the effluent solutions were recom-mended and the entire process was presented in a flowsheet.

Gold is a significant revenue source for custom copper smelters facing profitability challenges due to low treatment and refining charges, stricter regulations, and rising costs. Gold is also often blended with copper concentrates, but precise recovery rates from smelting processes are poorly documented despite gold critical economic importance. This paper aims to provide the first comprehensive estimates of gold first-pass recovery across various operational units within the copper sulfide concentrate processing flowsheet. It evaluates the effectiveness of different copper smelting and converting technologies in recovering gold. Optimizing gold first-pass recovery is especially important to enhance immediate financial returns and responsiveness to market dynamics, allowing companies to capitalize on favorable gold prices without delays. Given the absence of direct measurements for gold recovery rates, this research develops an estimation method based on understanding gold loss mechanisms during smelting. The study identifies and analyzes key input and output parameters by examining data from various copper producers. By correlating these parameters with gold loss, the research estimates gold first-pass recovery rates within the copper smelting process. Among integrated smelting-converting routes, the flash smelting to Peirce-Smith converting route achieves the highest gold first-pass recovery (98.8–99.5%), followed by the Mitsubishi continuous smelting and converting process (94.3–99.8%), bottom-blowing smelting to bottom-blowing converting (95.8%), flash smelting to flash converting (95.5%), Teniente smelting to Peirce-Smith converting (95.2%), and the Noranda continuous smelting and converting process (94.8%). The final recovery rates are expected to be higher considering the by-products internal recirculation and post-processing within the copper flowsheet. Additionally, superior gold recoveries are attributed to advanced metallurgical practices and control systems, which vary even among companies with similar technologies. The research demonstrates that copper smelting can effectively recover over 99% of gold from sulfide concentrates. Gold accumulates up to 1000 times its original concentration in anode slime during electrolytic refining, generating 5-10 kilograms of slime per ton of copper, which is further processed to recover gold and other by-products. Major smelters operate precious metal plants where recovering gold from highly concentrated anode slime is both cost-effective and efficient.

This study aimed to explore the experiences of teachers in the recovery of educational skills. Specifically, ten teachers of Andap National High School are selected for the in-depth interview. This study employed a qualitative-phenomenological research design of which in-depth interview (IDI) was used in gathering the data. The study utilized phenomenological approach to study a particular phenomenon concerning the post-pandemic experiences of teachers in the implementation of the face-to-face classes. After gathering sufficient amount of data through the conduct of in-depth interviews, thematic analysis was used to analyse further the results and to check the disparities and similarities of all responses gathered. This was the time wherein responses were categorized and organized into themes. The findings of the study revealed that the challenges encountered of educational skills recovery were sources of learning materials, learning gaps, learners characteristics, difficulty with comprehension and lack of interest. It was also revealed that the most challenging teaching experiences in the recovery of educational skills were catching attention, learning gaps, communicating to students, need for remedial instruction, retroactive interference and difficulty in understanding English Language. They frequently have to quickly convert lesson material they had intended to teach in a classroom setting to any learning modality implemented. Further, adjust and learn new trend, provide opportunities to develop new skills, helps to manage stress, improved educational outcomes, become well-rounded teacher, networking and learning and continue doing responsibilities helped in these insights had in confronting challenges brought by the pandemic.

Based on a rich data set of recoveries donated by a debt collection business, recovery rates for non-performing loans taken from a single European country are modelled using linear regression, linear regression with Lasso, beta regression and inflated beta regression. We also propose a two-stage model: beta mixture model combined with a logistic regression model. The proposed model allows us to model the multimodal distribution we find for these recovery rates. All models are built using loan characteristics, default data and collections data prior to purchase by the debt collection business. The intended use of the models is to estimate future recovery rates for improved risk assessment, capital requirement calculations and bad debt management. They are compared using a range of quantitative performance measures under K-fold cross validation. Among all the models, we find that the proposed two-stage beta mixture model performs best.

The introduction of organic and inorganic substances to the environment is a result of human activities such as agriculture, domestic and industrial wastewater which leads to pollution. Treatment processes of these wastewaters are being conducted globally to eliminate easily settled materials and recover nutrients in an attempt to release clear and apparently clean effluent into natural waters. Lack of removing inorganic nitrogen and phosphorus nutrients is the greatest cause of eutrophication in water bodies which inhibits the life of other organisms as well as pose a threat to human life and loss of the economy. Different technologies have been applied and are being developed to recover nutrients as well as heavy metals from wastewater to meet the permissible limits before discharging effluents. Wastewater treatment using microalgae offers an opportunity to provide tertiary bio-treatment and production of valuable biomass. Microalgae use the available inorganic nitrogen and phosphorus for their growth which are then harvested for various uses. Additionally, they have the ability to remove heavy metals and some toxic compounds. The main specific microalgae species in this study is the Chlorella sorokiniana with the Aequorea victoria jellyfish This paper reviews some of the wastewater treatment processes and focus on the use of microalgae and some of the shortcomings of the technologies and how they can be improved to achieve maximum nutrient recovery economically with low energy demand.

This is a paper of Political Economy and Economic Policies into the European Green Deal framework to improve the Recovery Plan post-COVID-19. This paper is focused on the green jobs opportunity for Europe, especially for Spain. It is offered a systematization of concepts and calculations in the issue (attending the international institutions and forums proposals) to harmonize the recovery plans, to apply them beyond the energy sector and to align public and private sector, as well other key stakeholders in achieving this goal. The obtained outcome gives the creation of around 350.000 new green jobs and the necessity of a new workforce reskilled. This result makes necessary to coordinate sectoral plans by the policymakers in which all the involved entities might express their needs and views on the best education approach to renewables sector and green jobs.

The optical signals detected on multiple satellite platforms over snow surfaces are determined by the optical properties of snow surface and atmosphere. The solution of both direct and inverse problems of an atmosphere – underlying snow system requires simple relationships between top-of-atmosphere (TOA) reflectance R and microphysical/optical characteristics of both snow and atmosphere. The task of this paper is to present a simple analytical relationship between the value of R as detected on a satellite with atmosphere/snow properties. Such a relationship can be established using a numerical solution of integro - differential radiative transfer equation (RTE) (Liou, 2022). However, this path is quite complicated and time consuming. The analytical solutions of RTE are needed for the solution of various applied atmospheric and snow optics problems (Cachorro et al., 2022; Mei et al., 2020, 2022; Kokhanovsky, 2021). This is the main driver of this work. To simplify the problem under study we consider the case of Antarctica, where both snow and atmosphere are almost free of pollutants. This work is focused on the simulation of the moderate spectral resolution TOA measurements (1nm or so) and the spectral range 400-1000nm.

Monitoring training load, recovery, and wellness in maturation ages is even more relevant than in adulthood, especially during congested schedules. The objective of this study was to quantify and describe the differences in external and internal load, recovery, and perceived wellness in elite under-16 female players during a period of three competitions in seven days, based on their participation during matches. An observational design was used to quantify external load (total distance, high-speed distance, and PlayerLoad), internal load (differential sRPE), as well as recovery and wellness of 18 international under-16 players during a development tournament. The external load pattern of the starting players was undulating, with matches showing the highest internal load values compared to training sessions and non-starters. Non-starters players (whether training or matches) showed similar external load and differential sRPE values throughout the tournament (p>0.05). Starting players experienced higher internal load than non-starters during matches (p<0.037), without differences between training sessions (p>0.05). No changes were seen in wellness or recovery (all p-values >0.05), except for non-starters in session 3 compared to session 7 (p=0.024). Starting players had more weekly total minutes (p=0.018), differential sRPE (breath: p=0.002; leg: p=0.002; cognitive: p=0.003), total distance (p=0.003), and PlayerLoad (p=0.008) than non-starters. Our results indicate differing load patterns between starters and non-starters, which do not affect wellness and recovery differently. Starters accumulate more weekly total load. Coaches can use these findings to guide decisions and load compensations in high competition contexts for young female soccer players.

The thermal degradation of brakes has a significant impact on the stability of pure electric commercial vehicles during long downhill braking. Based on road slope and using fuzzy control method, design strategies for motor regenerative braking force and friction braking force distribution, with the aim of reducing friction braking force, improving braking stability, and recovering braking energy. By establishing driving conditions on roads with different slopes and using numerical analysis methods to verify the proposed control strategy. the results show that under the 6% constant slope driving condition, the vehicle maintains a constant speed of 30km/h downhill driving, and the braking energy recovery rate reaches 50.93%; Under the condition of 3% -6% gradient driving, the vehicle speed fluctuates slightly, but it can still be maintained at a constant speed of 30km/h for downhill driving through the adjustment of the motor's reverse drag characteristic, with a braking energy recovery rate of 49.97%; During the process of driving downhill at a constant speed, the frictional braking force does not participate in braking; The braking energy recovery rate is determined by the slope and braking deceleration.

There are several forms of maintenance high-efficiency hemodialysis (HD) including hemodiafiltrations (HDF) in different technic modes and expanded HD using dialyzers with medium cut-off membranes. The aim of the study was to assess the intradialytic tolerance and length of dialysis recovery time (DRT) in these modalities. This is an exploratory, cross-over study in maintenance HD patients with low comorbidity and no clinical indications for the use of high-efficiency HD, who were exposed to five intermittent dialysis in random order: high flux hemodialysis (S-HD), expanded HD (HDx), pre-dilution HDF (PRE-HDF), mix-dilution HDF (MIX-HDF) and post-dilution HDF (POST-HDF). 24 dialysis sessions of each method were included in the analysis. Dialysis parameters including blood flow rate, dialysis fluid flow rate and temperature, and pharmacological treatment were constant. Average total convection volume for post-HDF, pre-HDF and mix-HDF were 25.6 (3.8), 61.5 (7.2) and 47.1 (11.4) l, respectively. During all therapies, patients had similar hydration status monitored using bioimpedance spectroscopy and similar variability over time in systemic blood pressure, cardiac output, and peripheral resistance monitored using impedance cardiography. The lowest frequency of all intradialytic adverse events were observed during HDx. Delayed DRT was the shortest during PRE-HDF. Patients were also more likely to report immediate recovery while receiving PRE-HDF. These differences did not reach statistical significance, however the study results suggest that, intradialytic tolerance and DRT may depend on the dialysis method used. This support the need of taking into account patient preferences and quality of life while individualizing high efficiency therapy in HD patients.

The recovery and recycling of metals that generate toxic ions in the environment is of particular importance, especially when these are tungsten and, in particular, thorium. The radioactive element thorium has unexpectedly accessible domestic applications (filaments of light bulbs and electronic tubes, welding electrodes, working alloys containing aluminum and magnesium), which lead to its appearance in electrical and electronic waste from municipal waste management platforms. The current paper proposes the simultaneous recovery of waste containing tungsten and thorium from welding electrodes. The simultaneous recovery is done by applying a hybrid membrane electrolysis technology coupled with nanofiltration. An electrolysis cell with sulphonated polyether–ether–ketone membranes (sPEEK) and a nanofiltration module with chitosan-polypropylene membranes (C–PHF–M) are used to carry out the hybrid process. The analysis of welding electrodes led to a composition of: W (tungsten) 89.4%; Th 7.1%; O2 2.5% and Al 1.1%. Thus, the parameters of the electrolysis process were chosen according to the speciation of the three metals suggested by the superimposed Pourbaix diagrams. At a constant potential of 20.0 V and an electrolysis current of 1.0 A, the pH is varied and the possible composition of the solution in the anodic workspace is analyzed. Favorable conditions for both electrolysis and nanofiltration were obtained at pH from 6 to 9, when the soluble tungstate ion, the aluminum hydroxide and solid thorium dioxide were formed. Through a first nanofiltration, the tungstate ion is obtained in the permeate, and thorium dioxide and aluminum hydroxide in the concentrate. By adding a pH 13 solution over the two precipitates, the aluminum is solubilized as sodium aluminate which will be found after the second nanofiltration in permeate, the thorium dioxide remaining integrally (within an error of ±0.1ppm) on the C–PHF–M membrane.

This exploratory study examined the impacts of COVID-19 and emerging challenges and opportunities from aviation recovery. Using archival and secondary data analysis, the study found that there are several challenges to aviation recovery chief among them are labour challenges and extreme weather events, which have been responsible for traffic disruptions in major aviation markets such as Europe and the USA. Other emerging challenges include high debt, inflation, interest rates, fuel, cost of labour, and general operational costs. The study recommends several interventions to address the sector’s challenges, including adopting risk disaster preparedness and management to foster sustainability.

This short communication reports on the initial results of a much larger, ongoing project, the aim of which is to investigate the question: could the skin microbiome, just like the gut microbiome, play a role in sports recovery and performance – and if so, could this role be as significant a one as that played by the gut microbiome? 17 high performance college athletes addressed their skin microbiome by minimizing contact with synthetic chemicals and by using topical skin supplements, shown previously to significantly increase skin microbiome biodiversity, for two weeks after training. 76% said their skin softness improved, 35% said their muscle stiffness and recovery after sport improved, 12% said their sleep quality improved, and 100% said they would be likely to use skin supplements again. Future work will use hundreds of athletes.

In recent years, CPU caches have revealed themselves as one of the most powerful sources of information leakage. This information leakage affects any implementation whose memory accesses, to data or instructions, depend on sensitive information such as private keys. In most cases, side-channel cache attacks do not require any specific permission and just need access to a shared cache. This fact, combined with the spread of cloud computing, where the infrastructure is shared between different customers, have made these attacks quite popular. In this paper, we present a novel approach to exploit the information obtained from the CPU cache. First, we introduce a non-access attack that provides a 97\% reduction in the number of encryptions required to obtain a 128-bit AES key. Next, this attack is adapted and extended in what we call the encryption-by-decryption cache attack or EBD, to obtain a 256-bit AES key. When EBD is applied to AES-256, we are able to obtain the 256 bits of the key with less than 10000 encryptions. These results make EBD, to the best of our knowledge, the first practical attack on AES-256 and also demonstrate that AES-256 is only about 3 times more complex to attack than AES-128 via cache attacks. In both cases the target is the AES T-table-based implementation, and we also demonstrate that our approach works in a cross-VM scenario.

Thorium is a weak radioactive element, but the control of its concentration in natural aqueous systems is of great interest for health, because it is a toxic heavy metal. The present paper presents the recovery of thorium from diluted synthetic aqueous systems by nanofiltration. The membranes used for nanofiltration of systems containing thorium species are composites containing 4′-Aminobenzo-15-crown-5 ether (ABCE) and sulfonated poly–ether–ether–ketone (sPEEK). The composite membranes (ABCE–sPEEK) were characterized by scanning electron microscopy (SEM), energy dispersive X–ray spectroscopy EDAX, thermal analysis (TG and DSC) and from the perspective of thorium removal performance. To determine the process performances, the variables were: the nature of the composite membrane, the concentration of thorium in the aqueous systems, the rotation speed of the stirrer, the pressure and the pH of the thorium aqueous system. When using pure water, a permeate flux value of 12 L·m⁻2 h⁻1 was obtained for sPEEK membrane, and up to 15 L·m⁻2 h⁻1 for the ABCE–sPEEK composite membrane. The use of mechanical stirring, with a propeller stirrer, leads to an increase in the permeate flux of pure water by about 20 % for each of the studied membrane. Depending on the concentration of thorium and the pH of the feed solution, retentions between 84.9 % and 98.4 % were obtained. An important observation is the retention jump at pH 2 for the ABCE–sPEEK composite membrane. In the paper, a thorium ion retention mechanism is proposed for the sPEEK membrane and the ABCE–sPEEK composite membrane.

Plastics, primarily microplastics, are among the greatest pollutants in aquatic environments. Their removal and/or degradation in these environments are crucial to ensure an optimal future of the ecosystems. In this work MnO2 particles were synthesized and characterized for the removal polystyrene microplastics as a model. MnO2 catalyzes the peroxide reaction, resulting in the formation of oxygen bubbles that propel the pollutants to the surface, achieving removal efficiencies of up to 80%. To achieve this, hydrothermal synthesis was employed using various methods. Parameters such as MnO2, microplastics and H2O2 concentrations were varied to determine the optimal conditions for microplastics recovering. The ideal conditions for a low microplastic concentrations of microplastics (10 g L-1) are 0.2 g L-1 MnO2, 1.6% of H2O2 and 0.01 triton as a surfactant. In these conditions the micromotors can recover approximately of 80% 300 nm sized polystyrene microplastic within 40 min.

Background: Tachycardia-induced cardiomyopathy (TIC) is caused by prolonged tachycardia leading to left ventricular dilatation and systolic dysfunction with heart failure. Although TIC is more common in adult, it is rare in early infant. Methods: Clinical testing was performed as part of medical evaluation and management. Next gene se-quencing (NGS) was performed for a patient with TIC. Literature review about TIC was con-ducted. Results: The case was a 5-month-old infant referred the hospital due to symptoms with heart failure at least lasting two months. Heart rate was 200 beats per minute, left ventricular ejection fraction fell below 14%, and electrocardiograms showed atrial flutter, suggesting TIC. After cardiover-sion, there was no recurrence of atrial flutter, and cardiac function was improved at 98 days after tachycardia arrest. There were no pathogenic variants identified according to NGS. Literature review identified 8 early infantile cases with TIC reported. However, there were no previous re-ports such as our case with longer duration of TIC. Conclusions: Improvement of cardiac function depends on the duration of TIC. TIC should be considered in all patients with a dilated cardiomyopathy of uncertain origin and who have tachycardias such as atrial flutter.

This study investigates the efficacy of an integrated rehabilitation program that combines vestibular and knee-focused therapies to improve proprioceptive function, balance, and motor control in patients suffering from both Benign Paroxysmal Positional Vertigo (BPPV) and knee joint conditions. The study involved 59 participants diagnosed with both vestibular dysfunction and knee impairments, who were enrolled in a comprehensive rehabilitation program. Vestibular interventions included specific maneuvers such as the Epley maneuver and Brandt-Daroff exercises, aimed at repositioning otoliths and reducing vertigo symptoms, while balance retraining exercises were implemented to enhance stability and prevent falls. Additionally, TECAR therapy was used for its deep tissue heating and regenerative benefits, and specific proprioceptive exercises targeting the knee joint were conducted to improve joint position sense and reduce the risk of falls. The intervention resulted in significant improvements in proprioceptive accuracy, as evidenced by enhanced joint position sense measurements and increased scores on the Dynamic Gait Index (DGI). These findings suggest that the dual-targeted rehabilitation approach not only addresses the individual impairments associated with vestibular dysfunction and knee pathology but also effectively improves overall functional outcomes by tackling the complex interplay between these conditions. The study further highlights the importance of a multidisciplinary approach in rehabilitation, where addressing vestibular and musculoskeletal dysfunctions simultaneously can lead to better patient outcomes. The integrated rehabilitation strategy presented in this study offers a comprehensive approach to managing complex clinical cases, ultimately contributing to improved quality of life and functional independence in patients affected by concurrent vestibular and knee joint issues.

More water utilities are adopting Aquifer Storage and Recovery (ASR) to balance long-term water supply and demand. Due to large implementation and operation costs, ASR projects need to be optimized, particularly for energy use, which is a major operating expense. This study examines the relationships among energy use, recharge, and recovery at two ASR projects in the western United States. The major finding is an economy of scale for recovery processes, but not for gravity-fed recharge processes. The economy of scale found is as follows: the energy intensity recovered decreases with volume. This suggests it is more energy-efficient to recover large volumes of water in one interval instead of recovering smaller volumes at more frequent intervals. The H2Oaks recovery process experienced a 78% decrease in energy intensity from 0 to 50,000 m3 recovered, while the Sand Hollow site experienced a 43% decrease in energy intensity from 0 to 50,000 m3 recovered. Statistical analyses of the recovery process showed p values lower than 0.0001, R2 values between 0.43 and 0.57, and a RMSE value between 0.55 and 2.1, indicating the presence of a moderate correlation between energy and volume. This economy of scale has been observed in multiple instances in water and wastewater treatment. This finding not only has applications to ASR but also all recovery or recharge wells, whether or not they are paired with each other. Furthermore, this study confirms the need for more reliable and accessible energy data to fully understand the implications of the energy–water nexus.

Intelligent Transportation Systems (ITS) encompasses technologies, services, and applications facilitating communication between vehicles (V2V) and between vehicles and fixed infrastructure (V2I and I2V). This mutual interaction constitutes a Vehicular Ad-Hoc Network (VANET) which supports a plethora of applications targeting critical transportation aspects, such as safety, mo-bility, and environmental considerations. Dedicated Short Range Communications (DSRC), op-erating on the 5.9 GHz band, is pivotal for such exchanges. We introduced an innovative algorithm designed to identify jamming attacks and transition the Safety Application to a secure fail-safe mode. This algorithm leverages a dual-metric strategy, incorporating both distance and PDR measurements. Field tests confirm that our algorithm adeptly recognizes the activities of deceptive jammers, ensuring a prompt shift of the safety application into its fail-safe state. This paper delves into these countermeasures, evaluating their efficiency via mathematical modelling, simulations, and on-ground testing. Findings acknowledge that these strategies bolster the reliability of safety applications in jamming scenarios. Furthermore, the approaches propounded align with ongoing standardization endeavours by relevant authorities, ensuring communication mediums remain unhindered.

Enhanced oil recovery (EOR) refers to the various techniques used to increase the amount of crude oil that can be extracted from an oil field. These techniques are used after the primary and secondary recovery methods have been depleted. There are three main types of EOR: thermal, gas injection, and chemical. EOR techniques can be expensive and complex, but they can help to recover additional oil that would otherwise be left in the reservoir. EOR can also extend the life of an oil field and increase the overall production from a given field. The parameters affecting oil recovery are a major concern in EOR systems, and these parameters need more consideration with the factors affecting them. In this study, the influence of permeability variations on fluid flow in a sandstone reservoir was explored, as well as an up-to-date description of three states of EOR with thorough explanations of the methods utilized and the mechanisms driving their oil recovery application. The difficulties encountered in the use of the different standard EOR Mechanisms were noted, and solutions to these difficulties were proposed. Furthermore, the contemporary trend of adding nanotechnology and its synergistic effects on the stability and efficiency of traditional chemicals for EOR were examined and analysed. Finally, laboratory findings and field initiatives were discussed. The review went into detail about the transport of nanoparticles across reservoirs, as well as the evaluation of EOR, mobility ratio, and fluid displacement efficiency. This review provides thorough information on the uses of improved oil recovery mechanisms for sustainable energy production.

Pyrolysis is a thermochemical conversion process designed for biomass decomposition in an oxygen-free environment. It typically operates within a temperature window of 200 to 800°C and generates various byproducts, including gases, liquid fractions (both aqueous and organic) such as bio-oil, and solids like char. Bio-oil is a significant product of pyrolysis. It is characterised by a complex blend of organic compounds. The acidic nature of bio-oil primarily originates from volatile acids, such as acetic acid. The recovery of acetic acid from bio-oil facilitates the use of the extracted substance as a precious resource, hence enhancing its significance in the framework of a circular bioeconomy. Acetic acid finds widespread application in manufacturing commercially important chemicals like vinyl acetate monomers and formulating phytosanitary products due to its inherent herbicidal and antifungal properties. However, to be used, acetic acid has to be separate from the raw bio-oil. Separation methodologies, including nanofiltration and reverse osmosis, demonstrate potential in recovering acidic constituents from bio-oil due to their high selectivity and effective system management. This article offers a concise review about acetic production from lignocellulosic biomass from pyrolysis and its recovery through various membrane separation processes.

Although a slightly radioactive element, thorium is considered very toxic because its various species, which reach the environment, can constitute an important problem for the health of the population. The present paper aims to expand the possibilities of using membrane processes in the removal, recovery and recycling of thorium from industrial residues reaching the municipal waste processing platforms. The paper includes a short introduction on the interest shown for this element, a weak radioactive metal, followed by highlighting of some common (domestic) uses. In a distinct but concise part, the bio-medical impact of thorium is presented. The classic technologies for obtaining thorium are concentrated in a single schema, and then the speciation of thorium is presented with an emphasis on the formation of hydroxo-complexes and complexes with common organic reagents. The determination of thorium has been highlighted both on the basis of its radioactivity, but especially through methods that call for extraction followed by an established electrochemical, spectral or chromatographic method. Membrane processes are presented based on the electrochemical potential difference, rapidly presenting barro-membrane processes, electrodialysis, liquid membranes and hybrid processes. A separate sub-chapter is devoted to proposals and recommendations for the use of membranes in order to achieve some progress in urban mining for the valorization of thorium.

EOR is a process that helps maximize recoverable oil reserves, extend field life and increase recovery rates, and is an important tool for companies to maintain production and increase return on investment. In this article, the performance of nanoclay on aqueous phase viscosity, wettability, and recycled oil in core fluidization in polyacrylamide nanofluid has been investigated in different experiments and EOR. We have used polymers due to the properties of polymers in increasing rheology and effective mobility and controlling stability and variability to resume growth oil in nanofluids. Adding 5% by weight of salt to polymer-clay nanofluid has also been investigated in samples comparable to pure nano clay without salt. The viscosity of this suspension increases by about 50% by adding a certain amount of salt. If the same amount of salt is added to the polymer diluent, the viscosity decreases drastically. The results of the wettability test also show that clay has a better potential to change the wettability in the tendency to salt. In core fluidization tests, the highest efficiency of 30% was obtained in the third recycling in the combination of clay nanoparticles and sulfone copolymer. The highest efficiency was obtained in the third scenario in core fluidization tests, that is; A combination of resin nanoparticles and sulfone copolymer. Their detailed behavior in the characteristics of wettability, rheology, and core fluidization is analyzed in this article.

Significant amount of oil remains in the reservoir after primary and secondary operations and to recover the remaining oil, enhanced oil recovery (EOR) can be applied as one of the feasible options remaining nowadays. In this study new nano polymeric materials have been prepared from purple yam and cassava starches. The yield of purple yam nanoparticles (PYNPs) was 85% and that of cassava nanoparticles (CSNPs) is 90.53%. Synthesized materials were characterized through particle size distribution (PSA), zeta potential distribution, Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and transmission electron microscopy (TEM). The performance of PYNPs in recovering oil was better than CSNPs as found from recovery experiments. Zeta potential distribution results confirmed the stability of PYNPs over CSNPs (-36.3 mV for PYNPs and -10.7 mV for CSNPs). The optimum concentration for these nanoparticles has been found from interfacial tension measurements and rheological properties and it was 0.60 wt.% for PYNPs and 0.80 wt.% for CSNPs. More incremental recovery (33.46%) has achieved for the polymer that contained PYNPs in comparison to the other nano-polymer (31.3%). This opens the inception for a new technology for polymer flooding that may replace the conventional method that depends on partially hydrolyzed polyacrylamide (HPAM).

The temporal evolution of pandemics described by the susceptible-infectious-recovered (SIR)-compartment model is sensitively determined by the time dependence of the infection (a(t)) and recovery (u(t)) rates regulating the transitions from the susceptible to the infected and from the infected to the recovered compartment, respectively. Here approximated SIR-solutions for different time dependencies of the infection and recovery rates are derived which are based on the adiabatic approximation assuming time-dependent ratios k(t)=u(t)/a(t) varying slowly in comparison to the typical time characteristics of the pandemic wave. For such slow variations the available analytical approximations from the KSSIR-model, valid for a stationary value of the ratio k, are used to insert a-posteriori the adopted time-dependent ratio of the two rates. Instead of investigating endless different combinations of the time dependencies of the two rates a(t) and u(t) a suitably parameterized reduced time dependence of the ratio k(tau) is adopted. Together with the definition of the reduced time this parameterized ratio k(tau) allows us to cover a great variety of different time dependencies of the infection and recovery rates. The agreement between the solutions from the adiabatic approximation in its four different studied variants and the exact numerical solutions of the SIR-equations is remarkably good providing strong confidence in the accuracy of the proposed adiabatic approximation.

The challenge regarding COVID-19 is to prevent complications and fatal evolution. Azithromycin (AZM) and hydroxychloroquine (HCQ) have proven their antiviral effect in vitro. We aimed to assess the efficacy and safety of AZM alone or combined to HCQ, prescribed, at an early stage, in patients with Covid-19, in a primary care setting. Eighty-eight patients received either no or a symptomatic treatment (NST) (n=34) or AZM alone (n=34) or AZM+HCQ (n=20). The efficacy end point was the time to clinical recovery and the safety end point was the occurrence of cardiovascular events. The mean (SD) times to achieve clinical recovery were respectively 25.8 days (11.1), 12.9 days (13.4) and 9.2 days (9.3), showing a statistically significant difference between NST and AZM alone (p<0.0001) or AZM+HCQ (p<0.0001). To improve the evidence level, a case-control analysis was performed on a sample of 57 patients (19/group) matched for age, sex and BMI. The statistical difference between NST and AZM was confirmed (p=0.0149) as well as the difference with AZM+HCQ (p=0.0002). No cardiac toxicity was recorded in any patient. No statistical difference was shown between AZM and AZM+HCQ groups, although the dual therapy tended to be more effective in patients over 50 years, based on an analysis using the cox model. In conclusion, AZM and AZM+HCQ favourably impacted the course of the disease. We need trials, ideally prospective/double blind, to show if a statistical difference can be evidenced with a broader group, and clarify the indications of each treatment depending on initial clinical presentation.

Nutrients management is a mainspring in agricultural systems for sustained productivity, economy sustainability and environmental quality. Excessive and lesser nutrient application caused environmental pollution and reduced production, respectively impacting socio-economics of the entire ecosystems. Sustainable agricultural production thus demands supplementation of nutrients either through natural processes, application of animal by-products, and mineral fertilizers to crop fields. Technology application for treating useless agricultural wastes into useful source is a management strategy that prevents environment pollution. Crude animal manures triggered soil degradation, attenuation air and water quality, and resulted in higher concentrations of heavy metals. Primary nutrients, i.e., nitrogen, phosphorus and potassium are used globally and are non-renewable. Augmented upsurge in prices of inorganic fertilizers and required discharge restrictions on nutrient has stimulated the technological developments including biochar, composting, vermicomposting, composting with biochar, pyrolysis, forward osmosis, and electro-dialysis to recover nutrients. Therefore, outlining the research gaps considering the present and imminent potential of these technologies for adaptation of nutrient recycling is of great importance. Thus, it’s need of an hour to fix our environment and for that scientists are trying to introduce and renovate the technologies which have immense potential to mitigate the negative effects of technology adversities on our environment.

Fractured media are seldom considered viable for storing excess thermal energy seasonally, compared to the more commonly used porous aquifers, due to their heterogeneity, lower storage capacity, and potential for unpredictable flow paths. This study employs COMSOL Multiphysics to create a numerical model of a fractured granite reservoir located below the Bedretto underground laboratory. The energy efficiency of both single-well and doublet systems was evaluated over 25 cycles, each comprising four 91-day phases: injection, storage, production, and resting. Results indicated that the single-well system was more efficient, with energy efficiency increasing with the flow rate. For an injection temperature of 60 °C, the system achieved energy efficiencies of up to 59.3% and 67.7%, after 10 and 25 cycles, respectively, aligning with porous Aquifer Thermal Energy Storage (ATES) system efficiencies at this temperature. Exploration of electricity production using water injected at 120 °C revealed it to be uneconomical and ineffective. However, the most promising use of the retrieved water was found to be direct ground heating for a greenhouse. This technology offers a potential alternative for thermal energy storage in regions lacking suitable porous aquifers, although identifying appropriate locations with the necessary geological characteristics may present significant challenges.

Background/Objectives: High-intensity anaerobic physical training frequently results in muscle damage among boxers and kickboxers, which can impede performance and recovery. Vibrational therapy (VT) and passive rest (PR) have been employed as methods to enhance muscular recovery and performance. This study evaluates the effectiveness of these two recovery methods on upper limb muscle strength and lactate levels in plasma after high-intensity exertion. Methods: Eighteen elite boxers and kickboxers, aged 19-32 years, underwent tests employing VT and PR as recovery methods in a controlled, crossover study. Muscle performance was assessed via isokinetic dynamometry, and lactate levels were measured pre-exercise, post-exercise, and post-recovery. The study adhered to the Declaration of Helsinki guidelines and was approved by the relevant bioethics committee. Results: The results showed that VT led to a faster recruitment of muscle fibers and improved muscle endurance as indicated by decreased fatigue work indices compared to PR. However, no significant differences were observed in peak torque or lactate levels between the two recovery methods. The VT group exhibited quicker recovery times in torque generation and better performance in fatigue resistance. Conclusions: VT appears to provide superior muscular recovery compared to PR following intense anaerobic effort, particularly in terms of muscle strength endurance and activation speed. These findings support the potential of VT in sports recovery protocols, although similar lactate response suggests that metabolic recovery rates are not significantly affected.

Though nowadays germanium do not reach the range of popularity than other metals, i.e. rare earth elements, its utility in target industries makes of it also a strategic metal. Though germanium can be find in a series of raw materials, the principal source for its recovery is from secondary wastes of the zinc industry, and also, the recycle of germanium-bearing waste materials is becoming of interest. In this recovery, Hydrometallurgy is performing a key role to the successful achievement of this goal. The present work reviews the most recent applications (2023 and 2024 years) of hydrometallurgical operations on the recovery of germanium from different solid and liquid sources.

Background: Measuring vital signs has always been a central task for Critical Care Nurse´s (CCNs) and Registered Nurse Anesthetist`s (RNAs) providing care in the post-anesthesia care unit (PACU) and a prerequisite for their decision-making. Properly measuring and understanding pediatric vital signs is a challenge in younger pediatric patients up to 36 months old. Purpose: gain a greater understanding of CCNs' and RNAs' perceptions of decision-making regarding the level of vital sign monitoring children require in the PACU. Method: A qualitative study design involving the critical-incident technique was used. Interviews were carried out with a purposeful sample of CCNs and RNAs (n=17) from two different hospitals. Findings: According to the nurses' experience, grounds for decisions concerning children’s need of vital-sign monitoring were both adequate and inadequate. They used actions to adjust the monitoring of vital signs to optimise conditions for assessment and the prospects of a safe recovery for the child. Conclusions: Evidence-based care and safety are compromised when the technology has limitations and is not adapted for children. Its use means that experience and clinical assessment are relied on to a greater extent. This not only makes experience important for reliable assessment, but also means that greater risks are accepted.

All fundamental Planck scale symmetries are restored on a global level when a new charge is postulated in a finite, closed, Euclidean discrete space. Gravity emerges as a residual effect of the electromagnetic force in this scenario, resulting in a deterministic toy universe driven by a single input parameter. The model is developed using a constructive approach. Randomness is identified using a Chaintin argument. Aleph0 definite value is tied to the size of the universe. This is not an interpretation of Quantum Mechanics, but a deeper attempt to describe nature.

All fundamental Planck scale symmetries are restored on a global level when a new charge is postulated in a finite, closed, Euclidean discrete space. Gravity emerges as a residual effect of the electromagnetic force in this scenario, resulting in a deterministic toy universe driven by a single input parameter. Randomness is identified using a Chaintin argument. Aleph0 definite value is tied to the size of the universe. This is not an interpretation of Quantum Mechanics, but a deeper attempt to describe nature.

Nanoparticles have been proposed for enhanced oil recovery (EOR). The research has demonstrated marvelous effort to understand the mechanisms of nanoparticles-EOR. Nevertheless, gaps still exist in terms of understanding the improved fluids and fluid-rock interactions by nanoparticles, which are the key driving forces for oil mobilization. This paper investigates four types of polymer-coated silica nanoparticles as additives for water flooding oil recovery in water-wet reservoirs. A series of flooding experiments were performed with nanoparticles at 0.1 wt.% in seawater at ambient conditions. The dynamics of fluids, fluid-rock interface interactions and fluid flow behavior were characterized in order to understand oil recovery mechanisms of nanoparticles. Experimental results showed an increase in oil recovery up to 14.8%-point with nanofluid injection compared to an average of 40% of the original oil in place (OOIP) obtained from control water flood test. Moreover, the nanoparticles mobilized residual oil and incremented oil recovery up to 9.2% of the OOIP. Displacement studies show that no single mechanism could account for the EOR effect with the application of nanoparticles. Instead, the mobilization of oil seemed to occur through a combination of reduced oil/water IFT, change in the rock surface roughness and wettability to more water-wet, and microscopic flow diversion due to clogging of the pores.

Mining is one of the main economic activities of several developing countries as Chile. Due to the progressive fall of the ore grades and the increasingly refractory composition of minerals, concentrating plants have increased that has led to an increase in the generation of tailings. Tailings, especially those obtained in the past, have remaining copper and other valuable species in quantities that can potentially be recovered, such as gold, silver, vanadium and rare earth elements. This transforms this abundant waste into a potential source of precious or strategic metals for secondary mining. One of the techniques of solid-liquid separation that allows the processing of solutions with low concentrations of metals corresponds to the adsorption, and more recently the biosorption, which is based on the use of biological matrices that do not constitute an environmental liability after application. Biosorption occurs as a consequence of the wide variety of active functional groups present in the different types of biomass. Bacterial, fungal, plant and algal biomasses have been described as biosorbents, mainly for the treatment of diluted and simple solutions. This work aims to recover copper from leached tailings using biomass of the red algae Gracilaria chilensis as a biosorbent. The tailing samples were taken from an abandoned deposit in the north of Chile and after an acid leaching copper was biosorbed, for which the kinetics of adsorption and the equilibrium isotherms were studied, applying the Freundlich and Langmuir models. Operational parameters such as adsorbent dose, pH and initial metal concentration were studied.

Background: Along with sarcopenia, delayed blood pressure (BP) recovery after standing and orthostatic hypotension (OH) are among key clinical challenges associated with ageing. Previous studies have reported an association between sarcopenia and delayed orthostatic BP recovery and OH. However, the haemodynamic mechanisms underlying this association remain unclear. Methods: 107 attendees to a falls and syncope clinic aged 50+ years underwent an active stand test with non-invasive beat-to-beat haemodynamic measurement. Hand grip strength and 5-chair stands time were measured. Muscle mass was estimated using bioelectrical impedance analysis, and participants were classified as non-sarcopenic and sarcopenic. Mixed effects models with linear splines were used to model the effect of sarcopenia status on Modelflow®-derived mean arterial pressure (MAP), cardiac output (CO), total peripheral resistance (TPR), stroke volume (SV) and heart rate (HR) after standing, while controlling for potential confounders. Results: Sarcopenia was associated with: attenuated recovery of MAP in the 10-20s period after standing (β -0.67, P<0.001); attenuated rise to peak (0-10s) and recovery from peak (10-20s) of CO (β -0.05, P<0.001; β 0.06, P<0.001); attenuated recovery (10-20s) of TPR from nadir (β -0.02, P<0.001) and attenuated recovery from peak (10-20s) of SV (β 0.54, P<0.001). HR was not significantly associated with sarcopenia status at any time interval after standing. Conclusion: The attenuated BP recovery after standing seen in sarcopenia appears to be driven by initial diminished peak of CO followed by attenuated recovery of CO from peak and TPR from nadir. The CO finding appears to be driven by SV rather than HR. Potential mechanisms for these findings include: cardio-sarcopenia, the effects of sarcopenia on the autonomic nervous system and/or the skeletal muscle pump.

As the application of cyber-physical systems (CPSs) becomes more and more widespread, its security is becoming a focus of attention. Currently, there has been much research on the security defense of the physical layer of the CPS. However, most of the research only focuses on one of the aspects, for example, attack detection, security state estimation or recovery control. Obviously, the effectiveness of security defense targeting only one aspect is limited. Therefore, in this paper, a set of security defense processes is proposed for the case that a CPS containing multiple sensors is subject to three kinds of stealthy attacks (i.e., zero-dynamics attack, covert attack, and replay attack). Firstly, the existing attack detection method based on improved residuals is used to detect stealthy attacks. Secondly, based on the detection results, an optimal state estimation method based on improved Kalman filtering is proposed to estimate the actual state of the system. Then, based on the optimal state, internal model control (IMC) is introduced to complete the recovery control of the system. Finally, the proposed methods are integrated to give a complete security defense process, and the simulation is verified for three kinds of stealthy attacks. The simulation results show that the proposed methods are effective.

This study describes the AMD impacted environments and critically discusses the effects of AMD, current prediction and prevention methods and treatment technologies. The study further, crit-ically analyses the case studies, gaps in AMD research and the challenges and opportunities of-fered by AMD. The study outlined future technological intervention aiming at a paradigm shift towards reducing the volume of sludge generated as well as the operating cost and improving AMD treatment efficiency. The integrated AMD treatment technologies that result in a holistic approach toward sustainable AMD treatment are a current need. As a result, a sustainable AMD treatment strategy has been made possible due to water reuse and rich resource recoveries such sulphuric acid, rare earth elements, and metals. The cost of AMD treatment can be decreased with the use of recovered water and resources, which is essential for developing a sustainable AMD treatment process.

This study was carried out to evaluate the effect of exogenous proline on growth, biochemical responses, and plant recovery of drought-stressed oilseed rape plants after renewed irrigation. The experiment was conducted under controlled laboratory conditions. After 21 days of cultivation, 3-4 leaf stage seedlings were sprayed with proline (1 mM), then subjected to prolonged drought stress for 8 days to achieve a severe water deficit, then irrigation was resumed and recovery was assessed after 4 days. The results show that exogenous application of proline reduced drought-induced growth inhibition of seedlings while maintaining relative water content (RWC) and growth parameters closer to those of irrigated plants. Proline had a positive effect on chlorophyll accumulation and membrane permeability while decreasing ethylene, H2O2, and MDA levels. Moreover, after 4 days of recovery, the H2O2 content of the proline-treated plants was significantly lower (2-fold) and the MDA content was close to that of continuously irrigated plants. Thus, all these biochemical reactions influenced plant survival: after drought + proline treatment, the number of surviving plants was 2 times higher than that of drought-treated plants. The findings show that exogenous proline has antioxidant, osmotic, and growth-promoting properties that improve the drought tolerance of winter oilseed rape plants and is, therefore, beneficial for drought adaptation in oilseed rape.