Background/Objectives: Vitamin D’s effect on risk health outcomes is often evaluated using prospective cohort studies. Risk ratios (RRs; e.g., hazard ratios or odds ratios) are determined for incidence for participants with baseline serum 25-hydroxyvitamin D [25(OH)D] concentrations below or above specified values. Serum 25(OH)D concentrations vary over time, thereby diluting the effect of 25(OH)D for long follow-up periods. Inverse relationships between RR and follow-up period have been reported for all-cause mortality rate and cancer incidence rates. Here I evaluate the effect for neurological outcomes. Methods: I analyzed how follow-up period affected results from 10 cohort studies of all-cause dementia, 6 studies of Alzheimer’s disease, and 9 for cognitive impairment with respect to vitamin D deficiency. Results: For all-cause dementia, Alzheimer’s disease, and cognitive impairment, respectively, the linear regression fits are RR = 2.9 – 0.14 × years, r = 0.73, p = 0.02; RR = 2.9 – 0.14 × years, r = 0.69, p = 0.13; and RR = 1.8 – 0.066 × years, r = 0.72, p = 0.03. The regression fit to RR for the shortest follow-up period for each outcome is considered the best estimate of vitamin D deficiency’s effect on risk. Those values are approximately twice that found by averaging all RRs without considering the effect of follow-up period. Conclusions: Vitamin D’s effect on risk of neurological conditions should be determined with relatively short follow-up periods after repeated 25(OH)D measurements as warranted during follow-up.

Abstract: This article reports the results of an ecological study of cancer incidence rates by state in the US for the period 2016-2020. The goals of this study were to determine the extent to which solar UVB doses still reduced cancer risk compared to findings reported in 2006 for cancer mortality rates for the periods 1950–1969 and 1970-1794 as well as cancer incidence rates for the period 1998–2002 and to determine which factors were recently associated with cancer risk. The cancer data for non-Hispanic white (European American) men and women were obtained from the Centers for Disease Control and Prevention. Indices were obtained for solar UVB at the surface for July 1992, and alcohol consumption, and diabetes and obesity prevalence near the 2016–2020 period. Lung cancer incidence rates were also used in the analyses as a surrogate for smoking, diet, and air pollution. The cancers for which solar UVB is significantly associated with reduced incidence are bladder, brain (males), breast, corpus uteri, esophageal, gastric, non-Hodgkin’s lymphoma, pancreatic, and renal cancer. Lung cancer was significantly associated with colorectal, laryngeal, and renal cancer. Diabetes was also significantly associated with breast, liver, and lung cancer. Obesity prevalence was significantly associated with breast, colorectal and renal cancer. Alcohol consumption was associated with bladder and esophageal cancer. Thus diet has become a very important driver of cancer incidence rates. The role of solar UVB in reducing risk of cancer has been reduced due to people spending less time outdoors, wearing sunscreen that blocks UVB but not UVA radiation, and population increases in overweight and obesity, which lowers 25-hydroxyvitamin D concentrations and generates systemic inflammation, a risk factor for cancer. The dietary approach that would reduce the risk of diabetes, obesity, lung cancer, and, therefore cancer, would be one based mostly on whole-plants and restrictions on red and processed meats and ultraprocessed foods. Solar UVB exposure for a few minutes before applying sunscreen and taking vitamin D supplements would also help reduce risk of cancer.Keywords: alcohol consumption; cancer incidence;

Understanding the structural intricacies of RNA molecules is essential for deciphering numerous biological processes. Traditionally, scientists have relied on experimental methods to gain insights and draw conclusions. However, the recent advent of advanced computational techniques has significantly accelerated and refined the accuracy of research results in several areas. A particularly challenging aspect of RNA analysis is the prediction of its secondary structure, which is crucial for elucidating its functional role in biological systems. This paper deals with the prediction of pseudoknots in RNA, focusing on two types of pseudoknots: K-type and M-type pseudoknots. Pseudoknots are complex RNA formations in which nucleotides in a loop form base pairs with nucleotides outside the loop and thus contribute to essential biological functions. Accurate prediction of these structures is crucial for understanding RNA dynamics and interactions. Building on our previous work in which we developed a framework for the recognition of H- and L-type pseudoknots, an extended grammar-based framework tailored to the prediction of K- and M-type pseudoknots is proposed. This approach uses syntactic pattern recognition techniques and provides a systematic method to identify and characterize these complex RNA structures. Our framework uses context-free grammars (CFGs) to model RNA sequences and predict the occurrence of pseudoknots. By formulating specific grammatical rules for type K and type M pseudoknots, we enable efficient parsing of RNA sequences to recognize potential pseudoknot configurations. This method ensures an exhaustive exploration of possible pseudoknot structures within a reasonable time frame. In addition, the proposed method incorporates essential concepts of biology, such as base pairing optimization and free energy reduction, to improve the accuracy of pseudoknot prediction. These principles are crucial to ensure that the predicted structures are biologically plausible. By embedding these principles into our grammar-based framework, we aim to predict RNA conformations that are both theoretically sound and biologically relevant.

Crop production in Afghanistan suffers from limited phosphorus (P) availability, which severely hinders national agriculture sustainability. This present study hypothesized that deep fertilizer placement could significantly enhance uptake of immobile P and thus tissue P accumulation and crop yield. A two-year pot experiment growing two maize (Zea mays) hybrid cultivars (Xida-789 and Xida-211) was therefore conducted to test these hypotheses under three contrasting fertilizer placement methods (broadcast, side band, and deep band). In doing so, P concentrations in both maize tissues and soils were compared at 45, 60, and 115 days after sowing (DAS) under nine combinations of nitrogen (N) and P fertilizer rates (kg ha-1: N112P45, N112P60, N112P75, N150P45, N150P60, N150P75, N187P45, N187P60, N187P75). Results have shown that deep band placement significantly increased P uptake efficiency, leading to greater P concentration and accumulation in maize tissues compared to other two fertilization methods. This improved P uptake was attributed to several factors associated with deep placement, including reduced P fixation, enhanced root access to P, and moisture availability for P uptake. Additionally, deep band placement combined with higher N application rates (N187 and N150) further enhanced plant P uptake by promoting P availability and utilization mechanisms. Deep band placement also resulted in significantly higher total soil P, Olsen-P, and P use efficiency than broadcast and side band methods, indicating a more efficient P fertilization strategy for maize that can improve growth and yield. This present study also found positive correlations between P concentration in plant organs and soil Olsen-P, highlighting the importance of adequate soil P levels for optimal plant growth. Overall, our results have showed that deep band fertilizer placement emerged as a superior strategy for enhancing P uptake efficiency, utilization, and maize productivity compared to broadcast and side band placement. This approach can potentially optimize P fertilizer utilization, improve maize growth and yield, while minimizing environmental P losses associated with broadcast applications.

The author demonstrates a stable Lagrangian solid modeling method, tracking the interactions of solid mass particles rather than using a meshed grid. This numerical method avoids the problem of tensile instability often seen with smooth particle applied mechanics by having the solid particles apply stresses expected with Hooke's law, as opposed to using a smoothing function for neighboring solid particles. This method has been tested successfully with a bar in tension, compression, and shear, as well as a disk compressed into a flat plate, and the numerical model consistently matched the analytical Hooke's law as well as Hertz contact theory for all examples. The solid modeling numerical method was then built into a 2-D model of a pressure vessel, which was tested with liquid water particles under pressure and simulated with smoothed particle hydrodynamics. This simulation was stable, and demonstrated the feasibility of Lagrangian specification modeling for fluid–solid interactions.

(S)-Atenolol ((S)-2-(4-(2-Hydroxy-3-(isopropylamino)propoxy)phenyl)acetamide) has been synthesized in >99% ee with use of Candida antarctica lipase B from Syncozymes (Shanghai, China), in a kinetic resolution of the corresponding racemic chlorohydrin. Deprotonation of the starting phenol building block was base catalyzed. The enantiopurity of the chlorohydrin building block remained unchanged upon subsequent amination. All four steps in the synthesis protocol have been optimized compared to previously reported methods, which makes this new protocol more sustainable and in accordance with green chemistry principles compared to previously reported protocols.

This study explores the dynamics of transparency and accountability in supplier relationship management (SRM) within the e-commerce sector. It investigates how e-commerce platforms and their suppliers navigate complexities to foster trust, enhance collaboration, and ensure ethical practices in global supply chains. The research employs a qualitative approach, utilizing semi-structured interviews with industry stakeholders to gather insights into current practices, challenges, and strategies in SRM. Findings highlight transparency as pivotal for sharing critical information such as sales forecasts, inventory levels, and pricing strategies, enabling suppliers to align operations with market demands effectively. However, achieving transparency faces hurdles including data privacy concerns and competitive sensitivities, necessitating robust data security measures and clear communication protocols. Accountability mechanisms, such as formal agreements and governance frameworks, emerge as essential for mitigating risks, resolving disputes, and ensuring compliance with ethical and regulatory standards across diverse contexts. Technological innovations like AI, blockchain, and big data analytics are transforming SRM by enhancing supply chain visibility, operational efficiency, and decision-making capabilities. Cultural factors and regulatory compliance also significantly influence SRM practices, shaping communication styles, relationship dynamics, and legal considerations. Emerging trends such as sustainable sourcing practices and collaborative partnerships are reshaping SRM, emphasizing sustainability and responsible business practices. This study contributes to the understanding of effective SRM strategies, offering insights and recommendations for stakeholders navigating the complexities of e-commerce supply chains.

This paper mainly explores the feasibility of using desert sand (DS) and recycled aggregate in cement stabilized base. Recycled coarse aggregate (RCA) and DS serve as the substitutes of natural coarse and fine aggregates, respectively, in cement stabilized base. A four-factor and four-level orthogonal test is designed to analyze the unconfined compressive strength, splitting tensile strength, and compressive resilient modulus. Furthermore, this paper investigates the effects of cement content, fly ash (FA) replacement rate, RCA replacement rate, and DS replacement rate on the road performance of cement stabilized base composing of RCA and DS. The test results reveal that the performance of cement stabilized base with partial RCA instead of natural coarse aggregate (NCA) and partial DS instead of natural fine aggregate satisfy the road use. Meanwhile, DS is beneficial to improve the strength of cement stabilized base. The correlation and microscopic analyses of the test results imply the feasibility of applying DS and recycled aggregate to cement stabilized base. It is hoped that this paper can offer a solid theoretical foundation for promoting the application of DS and recycled aggregate in road engineering.

This qualitative study explores the dynamics of Supplier Relationship Management (SRM) and its impact on innovation within the e-commerce sector. Through in-depth interviews and documentary analysis of three case study firms known for their innovative practices, the study examines how collaborative SRM practices influence innovation outcomes, organizational resilience, and competitive advantage in dynamic market environments. Key themes include the pivotal role of trust, transparency, and joint problem-solving in fostering effective SRM relationships, enabling knowledge sharing and co-development of innovative products and services. Innovation outcomes observed encompass product innovation, process improvements, and technological advancements facilitated by close collaboration between e-commerce firms and their suppliers. Challenges such as managing supplier diversity, navigating regulatory complexities, and mitigating geopolitical risks highlight the complexities and strategic imperatives of SRM implementation in global supply chains. The study also emphasizes the transformative role of digital technologies, including real-time data exchange, predictive analytics, and agile supply chain management, in enhancing SRM effectiveness and innovation capabilities. Strategic alignment with organizational goals and market strategies further enhances the impact of SRM, enabling firms to prioritize innovation initiatives, allocate resources effectively, and sustain growth amidst economic uncertainties. The findings contribute to theoretical understanding and practical insights into SRM strategies that promote innovation excellence and competitive positioning within e-commerce. The implications for practice underscore the importance of fostering collaborative supplier relationships, investing in digital transformation, and adopting proactive strategies to manage risks and regulatory compliance.

This study investigates the critical factors of trust, commitment, and adaptation within supplier relationship management (SRM) in the context of e-commerce. Through qualitative research methods, including semi-structured interviews and documentary analysis, the study explores how these factors influence relationship dynamics and organizational outcomes in digital business environments. Trust is examined as foundational to effective SRM, encompassing integrity, reliability, and shared values between buyers and suppliers. Commitment is analyzed in terms of long-term orientation, resource allocation, and relationship-specific investments aimed at mutual growth and sustainability. Adaptation emerges as essential for navigating the dynamic e-commerce landscape, encompassing proactive strategies, flexibility, and innovation to respond to market changes and technological advancements. The findings highlight the interplay and mutual reinforcement among trust, commitment, and adaptation, contributing synergistically to relationship resilience and organizational performance. However, challenges such as information asymmetry, cybersecurity risks, and organizational inertia are identified as barriers to effective SRM. Practical implications include strategies for enhancing trust, fostering commitment, and cultivating adaptive capabilities through continuous learning, collaborative innovation, and technology integration. By integrating these insights, businesses can strengthen supplier relationships, drive sustainable growth, and achieve competitive advantage in the digital economy.

This qualitative study explores the pivotal roles of trust and communication in supplier relationship management (SRM) within the e-commerce sector. Drawing on interviews and thematic analysis, the study examines how trust, comprising dimensions of competence, benevolence, integrity, and reliability, underpins collaborative partnerships and operational resilience between e-commerce platforms and suppliers. Effective communication strategies, including proactive engagement, transparent feedback mechanisms, and real-time updates via digital platforms, are identified as critical enablers for enhancing information exchange and fostering mutual understanding in SRM. Challenges such as cultural differences, technological complexities, and regulatory compliance requirements are also discussed, highlighting the need for strategic management and investment to mitigate risks and maintain trust in supplier engagements. Relational competencies such as empathy, active listening, conflict resolution, and trust-building skills are recognized as essential for navigating interpersonal dynamics and fostering collaborative relationships in e-commerce SRM. Strategically, integrating these findings into comprehensive SRM frameworks is emphasized to cultivate a positive organizational culture characterized by openness, ethical integrity, collaboration, and adaptability. This approach aims to enhance supplier relationships, drive innovation, and achieve sustainable growth in a competitive marketplace.

This qualitative study explores the intricacies of building sustainable supplier relationships in the e-commerce sector, focusing on best practices and strategic approaches. Through in-depth interviews with procurement managers, supply chain experts, and supplier representatives, the research identifies four critical themes: trust, technology integration, ethical practices, and performance measurement. Trust is found to be the foundation of effective supplier relationships, fostering open communication and collaboration, which are essential for addressing challenges and co-creating solutions. The integration of digital technologies such as supply chain management software, blockchain, and the Internet of Things significantly enhances transparency, decision-making, and operational efficiency, providing a competitive edge. Ethical practices, including adherence to fair labor standards and environmental sustainability, are increasingly crucial as consumer and regulatory expectations evolve, necessitating alignment between e-commerce companies and their suppliers. Performance measurement and continuous improvement are vital for maintaining quality and efficiency, with clear metrics and regular evaluations driving constructive feedback and optimization of supply chain processes. The study underscores the interdependence of these elements in fostering resilient and adaptable supplier relationships. The findings offer practical guidance for e-commerce businesses and suppliers, emphasizing the need for a holistic approach to supplier management that balances trust, technology, ethics, and performance. This approach not only enhances operational effectiveness but also ensures the long-term sustainability of supplier relationships in the dynamic e-commerce landscape. The research contributes to the theoretical understanding of supplier relationship management, providing a comprehensive framework for future studies and practical applications in the e-commerce industry.

Chronic fatigue syndrome (CFS) and multiple sclerosis (MS) share similarities regarding their epidemiology, symptomatology and craniospinal physiology. Indeed, the cardinal feature of CFS, fatigue, is also a major factor in the symptomatology of the majority of MS patients. Recently, we have found that there is a significant reduction in the craniospinal compliance in MS which affects both the stiffness of the walls of the spinal canal and the walls of the cerebral venous system. This change in compliance brings about an alteration in the effectiveness of the pulse wave dampening in the craniospinal system. The result is an impedance mismatch between the cortical veins and their draining sinuses, leading to dilatation of these upstream veins. We deduce this dilatation can only be brought about by an increase in the pressure gradient between the vein lumen and the subarachnoid space (i.e. the transmural pressure gradient). We hypothesise that given the similarities between MS and CFS, a similar mechanism underlies the physiology of CFS. We present two case studies to highlight the expected findings in CFS patients if this hypothesis were proven to be correct.

This study addresses the critical issue of dowel-bearing strength in Bambusa blumeana, a key sus-tainable construction material crucial for climate change mitigation. Given the lack of bamboo connection standards, the research focuses on determining the dowel-bearing strength of Bambusa blumeana, emphasizing factors such as dowel diameter, node placements, and the physical prop-erties of bamboo. A predictive equation is derived, enhancing the practicality of bamboo in struc-tural design. The results underscore a notable correlation between dowel diameter and character-istic strength, with implications for engineering practices. Node placements significantly affect dowel-bearing capacity, while bamboo's physical attributes, including thickness, culm diameter, and moisture content, exhibit modest correlations with strength. The derived equation aims to assist in structural design, mitigating splitting and bearing failures in bamboo structures. This research establishes a foundation for optimizing the use of Bambusa blumeana in sustainable construction, advancing the understanding of its dowel-bearing strength for improved sustainability and resili-ence in the construction industry. Future research suggestions include exploring bamboo-mortar composites, additional node placements, and employing more comprehensive empirical equations and curve-fitting techniques. The study advocates for further investigations with more diverse and larger bamboo samples to bolster robustness. Additionally, delving into bamboo ductility may offer valuable insights.

Modern drugs have changed epilepsy, which affects people of all ages. But for young people with epilepsy, the framework of drug development has stalled. In the wake of the thalidomide catastrophe, the misconception emerged that for people <18y antiseizure medications (ASMs) need separate proof of efficacy and safety (E&S), overall called “pediatric drug development.” This has been corrected to some extent. Authorities accept that ASMs are effective in <18y as well, but they still require "extrapolation of efficacy," as if minors were another species. In our view, the real problem is less that relevant parts of pediatric clinical epilepsy research over the past decades were useless, but that this has hampered research on meaningful challenges. We do not need to show that ASMs work also before the 18th birthday. But we need to learn how to best use ASMs to prevent brain damage in young patients and optimize ASMs use considering a broader range of aspects

Background: Many risk-modifying factors affect cancer incidence and mortality rates. Solar UVB reduces cancer risk by producing vitamin D, which has many mechanisms to reduce risk of cancer incidence, progression, and metastasis. Obesity increases cancer risk through several mechanisms, including increased inflammation. Method and Materials. We present an ecological study (a type of observational study) of incidence and/or mortality rates for cancers during 2007–2016 of 17 anatomical sites with respect to solar ultraviolet-B (UVB) doses and obesity prevalence. Data were averaged for 12 geographical regions. Results: Solar UVB doses were significantly inversely correlated with incidence rates for three types of cancer for males. They were inversely correlated with mortality rates for five cancers for males and four for females. Obesity prevalence was directly correlated with mortality rates for three cancers for males and seven for females. Discussion: The ecological approach has certain limitations, such as its sensitivity only to regional variations in relation to specific risk-modifying factors. In this study, these limitations include numerous factors influencing cancer risk and the fact that the data are averaged across entire regional populations, which may not reflect individual risks. Despite this, the study reveals important correlations. Specifically, it found that solar UVB exposure is linked to a lower risk of certain cancers, while obesity is associated with an increased risk of some cancers in France. These findings are consistent with results from a similar study in the United States on cancer rates between 2016 and 2020. The association between obesity and cancer risk aligns with other observational studies. However, it is uncertain to what extent higher solar UVB exposure or elevated serum 25-hydroxyvitamin D levels might mitigate the impact of obesity on cancer risk. Reducing cancer mortality in France may be achievable through vitamin D supplementation and efforts to lower obesity prevalence.

The relationship between the structure characteristics and performances of coal based hydrogenation isomeric base oil (CTL) and metallocene catalyzed coal based polyalphaolefin (mPAO) base oil was clarified here. CTL and mPAO were compared with typical petroleum based and natural gas based commercial API Class III and IV base oils. Pressurized differential scanning calorimetry (PDSC), Rotary Bomb Oxidation Test (RBOT) and four-balls friction tester were used to evaluate the oxidation stability and lubrication performance of base oils under different working conditions. The sensitivity of different base oils to typical antioxidants and extreme pressure antiwear agents was compared. Specially, the composition and structure of CTL base oil are obviously different from GTL and mineral base oil. The coal-based CTL and mPAO base oils exhibit commendable viscosity-temperature properties, characteristics, coupled with low-temperature fluidity, fire safety, and minimal evaporation loss. The lubricating properties, oxidation stability and the sensitivity to extreme pressure antiwear agents of CTL are close to those of similar base oils. But the sensitivity of CTL to typical antioxidants is relatively poor. Besides, compared with commercial PAO base oil, mPAO has lower isomerization degree and fewer isomerization types. The oxidation stability and sensitivity to typical antioxidants of mPAO base oil are comparable with those of commercial PAO base oil, while its lubrication performance and sensitivity to typical extreme pressure antiwear agents are significantly better than those of commercial PAO base oil.

Polyalcohol liquefaction can be done by acid or basic catalysis producing polyols with different properties. This study compared the mechanical properties of foams produced using polyols from liquefied Cytisus scoparius obtained by acid and basic catalysis and using two different foam catalysts. The differences were monitored using FTIR analysis. Acid-catalyzed liquefaction yielded 95.1 %, with the resultant polyol having an OH index of 1081 mg KOH/g while basic catalysis yielded 82.5 %, with a similar OH index of 1070 mg KOH/g. Generally, compressive strength with dibutyltin dilaurate (DBTDL) ranged from 16 - 31 kPa (acid-liquefied polyol) and 12 -21 kPa (base-liquefied polyol), while with stannous octoate (TIN), it ranged from 17 - 42 kPa (acid) and 29 - 68 kPa (base). Increasing water content generally decreased the compressive modulus and strength of foams. Higher water content led to a higher absorption at 1670 cm-1 in the FTIR spectrum due to the formation of urea. Higher isocyanate indices generally improved compressive strength, but high amounts led to unreacted isocyanate that could be seen by a higher absorption at 2265 cm-1 and 3290 cm-1. DBTL was shown to be the best foam catalyst due to higher trimer conversion seen in the spectra by a higher absorption at 1410 cm-1. Acid and base-derived polyols lead to different polyurethane foams with different FTIR spectra, particularly with a higher absorption at 1670 cm-1 for foams from acid-derived liquefaction.

This qualitative study explores the role of Supplier Relationship Management (SRM) in optimizing inventory within the context of e-commerce. Through semi-structured interviews with e-commerce managers and supply chain experts, the study investigates the strategies, challenges, and outcomes associated with SRM practices. Key findings highlight the critical importance of strategic partnerships with suppliers, emphasizing trust, transparency, and goal alignment as foundational elements for effective SRM. Participants underscored the transformative impact of technological advancements, including advanced analytics and blockchain technology, in enhancing supply chain visibility, optimizing inventory levels, and improving operational agility. However, the study also identifies challenges in SRM implementation, such as cultural differences, regulatory compliance, and geographical distances, which require proactive management strategies. Innovation emerges as a key driver of competitive advantage in e-commerce, facilitated through collaborative R&D initiatives and co-innovation with suppliers. Strategic alignment with organizational goals is crucial for integrating SRM practices with broader business objectives, including operational efficiency and risk mitigation. Recommendations include adopting integrated SRM strategies that leverage technological innovations while maintaining a focus on relationship-building and sustainability. Enhanced supplier performance monitoring, proactive risk management, and the integration of sustainable practices are proposed to strengthen supplier relationships and enhance supply chain resilience. By addressing these insights, e-commerce firms can optimize inventory management, drive innovation, and achieve sustainable growth in the digital economy.

This study investigates the critical role of Supplier Relationship Management (SRM) in enhancing the e-commerce user experience. In an increasingly competitive digital marketplace, effective SRM practices are essential for optimizing supply chain operations and meeting customer expectations. The research employs a qualitative approach, combining semi-structured interviews with industry stakeholders, extensive literature review, and case studies to explore various dimensions of SRM. Key findings reveal that strategic supplier selection criteria, including quality, cost efficiency, reliability, innovation, and sustainability, are pivotal in ensuring a robust and adaptable supply chain. Effective communication practices, such as transparency, frequent updates, and digital tools, foster strong supplier relationships and enable timely issue resolution. Performance management strategies, centered on KPI monitoring and continuous improvement, support operational excellence and customer satisfaction. Risk management practices, including diversification, contingency planning, and advanced analytics, are crucial for mitigating disruptions and ensuring supply chain resilience, as highlighted by the challenges posed during the COVID-19 pandemic. Technological integration with blockchain, AI, IoT, data analytics, and automation enhances efficiency, transparency, and decision-making capabilities in SRM. Furthermore, the study underscores the evolving integration of sustainability and ethical sourcing into SRM strategies, reflecting broader corporate responsibility goals. Ultimately, this research contributes to understanding how effective SRM strategies drive competitive advantage in e-commerce by enhancing supply chain reliability, responsiveness, and customer-centricity. As e-commerce continues to evolve, adapting and innovating SRM practices will be vital for companies aiming to sustain growth and meet the dynamic demands of global markets.

This study explores the influence of cultural differences on Supplier Relationship Management (SRM) within global e-commerce, examining communication styles, trust-building, negotiation strategies, and strategic alignment across diverse cultural contexts. Through qualitative research including interviews with e-commerce professionals, the study identifies how cultural factors shape SRM practices and outcomes, highlighting the importance of cultural sensitivity and adaptive strategies in fostering effective supplier relationships. Findings underscore the significance of communication preferences, trust norms, and strategic orientations in navigating cultural complexities to enhance operational efficiency and mitigate risks in global markets. Practical implications suggest integrating cultural dimensions into SRM frameworks, prioritizing cultural competence development, and leveraging cultural diversity for innovation and collaboration. Future research directions include exploring digitalization's impact on cross-cultural SRM and longitudinal studies on evolving cultural dynamics in global business. By advancing understanding in this area, e-commerce firms can enhance resilience, maintain competitive advantage, and achieve sustainable growth in the global marketplace.

This qualitative research explores Supplier Relationship Management (SRM) practices within the e-commerce fashion industry, aiming to uncover key strategies and their impacts. Through semi-structured interviews with supply chain managers, procurement officers, and supplier representatives, critical themes emerged: communication, trust, risk management, sustainability, and digital technologies. Effective communication, characterized by transparency and regular updates, emerged as pivotal for aligning expectations and resolving issues promptly. Trust-building practices, including fair dealings and formal agreements, were essential in fostering long-term partnerships, reducing transaction costs, and enhancing collaboration. Robust risk management strategies, such as supplier diversification and contingency planning, were identified as crucial for mitigating disruptions and ensuring supply chain resilience. Sustainability was highlighted as a strategic imperative, driven by ethical sourcing and environmental standards, supported by technologies like blockchain for transparency. The transformative role of digital technologies—supply chain management software, blockchain, IoT, and data analytics—was evident in enhancing visibility and decision-making across global supply chains. Viewing suppliers as strategic partners, rather than mere vendors, promoted collaborative innovation and mutual growth. Despite challenges like cultural differences and regulatory complexities, opportunities exist to enhance SRM through integrated best practices. By prioritizing effective communication, trust-building, risk management, sustainability, and digital innovation, companies can strengthen supplier relationships, optimize supply chain performance, and achieve competitive advantage in the e-commerce fashion sector.

This qualitative study explores supplier collaboration in e-commerce product development, examining motivations, challenges, strategies, outcomes, and ethical considerations. Through in-depth interviews with stakeholders from diverse e-commerce sectors, the study identifies key themes shaping collaboration dynamics. Motivations include innovation, operational efficiency, and strategic partnerships, driving companies to integrate supplier expertise early in product development. Challenges such as global supply chain complexities, goal misalignment, and communication barriers underscore the need for robust governance and cultural sensitivity. Strategies for success include technology adoption, supplier development programs, and collaborative decision-making, enhancing supply chain visibility and mutual benefits. Effective collaboration yields improved product quality, cost efficiencies, and enhanced customer satisfaction, supporting competitive advantage. Ethical sourcing practices and sustainability initiatives are crucial for maintaining trust and regulatory compliance. Cultural and organizational factors, including leadership support and change management, significantly influence collaboration outcomes. The study concludes with implications for theory and practice, emphasizing the role of innovative strategies and continuous improvement in supplier relationships. Future research could explore digital transformation, sustainability trends, and technological impacts on supplier collaboration in e-commerce. Practical applications include optimizing supply chain strategies to navigate complexities and capitalize on market opportunities.

This qualitative research explores the impact of Supplier Relationship Management (SRM) on e-commerce brand reputation, focusing on the strategic imperatives, operational challenges, and economic implications within digital supply chains. Trust emerges as a foundational element in effective SRM practices, facilitating consistent product quality, timely delivery, and consumer trust, thereby enhancing brand credibility and loyalty. Strategic alignment of SRM with organizational goals enables e-commerce brands to leverage supplier capabilities for mutual growth and innovation. Operational challenges such as technological constraints and logistical complexities underscore the importance of digital integration and proactive risk management strategies to optimize SRM effectiveness. Digital technologies, including AI and blockchain, play a transformative role in enhancing transparency, efficiency, and resilience in SRM strategies, enabling e-commerce firms to mitigate risks and capitalize on market opportunities. Emotional intelligence (EI) competencies among supply chain professionals facilitate effective communication, conflict resolution, and sustainable supplier relationships that bolster brand reputation resilience. Economically, effective SRM practices yield cost efficiencies, improved financial performance, and resilience against supply chain disruptions, supporting sustainable growth in competitive digital markets. This study contributes valuable insights for practitioners and scholars aiming to enhance SRM strategies, optimize supplier relationships, and strengthen brand reputation management in e-commerce. By prioritizing trust, strategic alignment, digital innovation, EI competencies, and proactive risk management, e-commerce brands can navigate complexities, capitalize on opportunities, and foster positive brand reputations in the evolving landscape of digital commerce.

This qualitative research explores Supplier Relationship Management (SRM) within the context of subscription-based e-commerce models. Through in-depth interviews and thematic analysis, the study investigates key elements such as trust, collaboration, technology integration, sustainability, risk management, cultural alignment, innovation, cost management, globalization, supplier selection, and performance measurement. Findings reveal that trust is foundational in fostering reliable interactions and open communication between e-commerce businesses and suppliers. Collaboration emerges as crucial for innovation and operational efficiency, facilitating co-development and shared risk management. Technology integration, including AI and blockchain, enhances supply chain visibility and decision-making capabilities. Sustainability considerations drive businesses to engage with suppliers adhering to environmental standards, enhancing brand reputation and consumer loyalty. Effective risk management strategies mitigate disruptions and ensure supply chain resilience. Cultural alignment fosters harmonious partnerships and mutual understanding across diverse global markets. Innovation through supplier collaboration drives product development and market responsiveness. Cost management practices optimize operational efficiency and strategic supplier relationships. Globalization necessitates adaptive strategies to manage diverse cultural and regulatory landscapes. Strategic supplier selection and continuous performance measurement drive ongoing improvement and alignment with business objectives. This study contributes empirical insights and practical implications for enhancing SRM in subscription-based e-commerce, informing strategies to navigate challenges and leverage opportunities in a competitive marketplace.

This qualitative study explores the pivotal role of Supplier Relationship Management (SRM) in enhancing resilience within e-commerce supply chains. In an era marked by rapid digital transformation and global interconnectedness, the resilience of supply chains has become a strategic imperative for organizations striving to maintain operational efficiency and meet customer expectations. Through semi-structured interviews with supply chain managers, procurement officers, and strategic sourcing specialists across diverse industries, this research investigates the strategies, challenges, and outcomes associated with SRM practices. Findings reveal that effective communication and collaboration are fundamental to successful SRM, fostering trust, transparency, and responsiveness in supplier relationships. Strategic risk management through proactive identification and mitigation strategies enables organizations to navigate uncertainties such as economic fluctuations and geopolitical tensions. SRM implementation yields significant organizational benefits, including improved supply chain efficiencies, enhanced product quality, and increased customer satisfaction. However, challenges such as technological complexities, cultural differences among global suppliers, and regulatory compliance issues underscore the need for adaptive strategies and digital investments. The integration of digital technologies such as AI and blockchain enhances SRM effectiveness by enabling real-time data exchange, predictive insights, and decision-making capabilities. Ultimately, SRM emerges as a cornerstone of sustainable growth and competitive advantage in e-commerce, empowering organizations to optimize supply chain performance and resilience amidst dynamic market conditions.

This qualitative study explores Supplier Relationship Management (SRM) in the context of digital transformation within e-commerce businesses, focusing on the implications of emerging digital technologies. Through semi-structured interviews and documentary analysis, the study examines how organizations leverage technologies like artificial intelligence (AI), blockchain, and Internet of Things (IoT) to enhance SRM practices. Findings reveal that digitalization enables improved operational efficiencies, real-time data analytics, and expanded supplier networks through platforms such as Amazon Business and Alibaba. Strategic shifts are noted towards collaborative supplier relationships, emphasizing joint innovation, technology co-investment, and shared risk management strategies. However, the implementation of digital SRM strategies presents challenges, including data privacy concerns, integration complexities, cybersecurity threats, and regulatory compliance issues. Organizations must navigate these challenges by developing robust governance frameworks and cybersecurity protocols to protect sensitive information and ensure regulatory adherence. Key performance indicators (KPIs) such as supplier performance, cost savings, innovation impact, risk management effectiveness, and sustainability integration are critical for evaluating the success of digital SRM initiatives. Strategically, businesses are advised to prioritize leadership commitment, cross-functional collaboration, and continuous learning to optimize digital SRM practices effectively. Future research should explore emerging trends in digital SRM, investigate technological impacts on supplier dynamics and organizational performance, and examine ethical considerations in digitalization. By integrating these insights into strategic decision-making, businesses can enhance supplier relationships, mitigate operational risks, and achieve sustainable growth in the global marketplace.

This qualitative research investigates the influence of Corporate Social Responsibility (CSR) on Supplier Relationship Management (SRM) within the e-commerce sector. Through semi-structured interviews and secondary data analysis, the study explores motivations, challenges, impacts, and strategic outcomes of integrating CSR practices into supplier relationships. Motivations for adopting CSR include ethical considerations, regulatory compliance, and meeting stakeholder expectations, reflecting a strategic alignment with corporate values and societal demands. Challenges such as resource constraints, regulatory complexities, and cultural differences highlight operational hurdles and strategic considerations e-commerce firms face in implementing CSR initiatives effectively. The study reveals that CSR enhances trust, collaboration, and risk mitigation within e-commerce supply chains through transparent communication, shared values, and ethical practices. Strategically, CSR contributes to enhanced brand equity, competitive advantage, and long-term value creation by differentiating firms in competitive markets and attracting socially conscious consumers and investors. However, economic trade-offs, stakeholder divergence, and operational complexities require firms to adopt adaptive strategies that balance short-term financial goals with long-term sustainability objectives. The findings suggest avenues for future research exploring longitudinal impacts of CSR on supplier relationships, cross-sectoral comparisons, and technological advancements in CSR-driven SRM practices. Practically, e-commerce firms should prioritize strategic alignment of CSR initiatives with core business objectives, engage stakeholders in CSR strategy development, and embrace continuous improvement to foster ethical conduct, stakeholder trust, and sustainable business practices.

Supplier diversity has emerged as a critical strategy for enhancing e-commerce operations by fostering inclusivity and innovation within supply chains. This qualitative research explores the role of supplier diversity in e-commerce, examining its impact on organizational strategies, competitive advantage, and stakeholder perceptions. Through semi-structured interviews with procurement managers, diversity officers, and supply chain executives from diverse e-commerce platforms, this study identifies key themes related to the benefits, challenges, and strategic implications of supplier diversity initiatives. Findings indicate that supplier diversity significantly enhances innovation and creativity within supply chains by integrating diverse perspectives and expertise. This diversity not only enriches product development and market responsiveness but also strengthens corporate reputation and brand equity, demonstrating organizational commitment to ethical business practices and community engagement. However, the study reveals persistent challenges, including financial barriers, systemic biases, and scalability issues, which hinder the effective implementation and scalability of supplier diversity programs. Effective supplier relationship management emerges as critical for maximizing the benefits of supplier diversity, fostering trust, collaboration, and long-term partnerships with diverse suppliers. Looking forward, the future of supplier diversity lies in digital transformation, globalization of supplier networks, and integration of sustainable sourcing practices to enhance transparency, efficiency, and resilience in supply chain operations. This study contributes to the growing literature on supplier diversity by providing empirical insights and practical implications for organizations aiming to leverage diversity as a strategic asset in e-commerce and global supply chain management.

This qualitative research explores Supplier Relationship Management (SRM) as a pivotal driver of sustainable practices in the e-commerce sector. Through in-depth interviews with industry experts, practitioners, and scholars, the study investigates how SRM strategies integrate sustainability criteria into procurement processes, mitigate environmental and ethical risks, and enhance operational efficiencies. Key findings highlight the strategic importance of collaborative relationships with suppliers, technological innovations such as blockchain and data analytics in promoting transparency and accountability, and the influence of consumer preferences for sustainable products on market dynamics. Despite challenges such as regulatory complexities and global supply chain dynamics, businesses are increasingly adopting sustainable SRM practices to strengthen brand reputation, achieve cost savings, and align with evolving sustainability standards. The study underscores the interconnected nature of sustainability within e-commerce operations and calls for continued research to advance technological solutions, refine regulatory frameworks, and foster industry-wide collaboration. By embracing sustainability as a strategic imperative, businesses can navigate complexities, drive innovation, and contribute to a more resilient and sustainable future for the e-commerce industry.

This study explores the strategic importance of leveraging supplier relationships for competitive advantage in the e-commerce industry. Strong supplier relationships are crucial for enhancing operational efficiencies, cost management, quality assurance, innovation, sustainability, and overall supply chain resilience. Through collaborative partnerships, e-commerce companies can streamline logistics, reduce costs, ensure consistent product quality, and foster innovation through joint development initiatives. Ethical sourcing and sustainable practices play a pivotal role in supplier relationship management (SRM), aligning with consumer expectations and enhancing brand reputation. Advanced technologies such as AI, blockchain, and IoT further transform SRM practices by improving transparency, efficiency, and decision-making capabilities across the supply chain. The study also discusses challenges in managing global supplier relationships, emphasizing the importance of effective communication, cultural sensitivity, and strategic risk management. By addressing these challenges and nurturing trust-based relationships with suppliers, e-commerce firms can navigate market complexities and achieve sustainable growth. This research provides insights for e-commerce companies seeking to optimize their supplier relationships and maintain competitive advantage in a dynamic market environment.

This qualitative study investigates the management of supplier risks in e-commerce through relationship management strategies, focusing on trust-building, communication practices, digital technology integration, risk assessment methodologies, challenges, innovation initiatives, and ethical considerations. The research aims to provide nuanced insights into how e-commerce companies navigate the complexities of global supply chains to mitigate operational, financial, and reputational risks associated with supplier relationships. Through semi-structured interviews with 20 key stakeholders in the e-commerce sector, data were collected and analyzed using thematic analysis. The findings underscored the foundational role of trust in establishing resilient supplier relationships, facilitated by transparent communication, consistent performance evaluation, and mutual respect for contractual obligations. Effective communication practices, supported by digital platforms and technologies such as AI, blockchain, IoT, and cloud computing, enhanced operational transparency and decision-making capabilities across supply chains. The study identified diverse approaches to risk assessment, from qualitative evaluations to quantitative models utilizing predictive analytics and scenario planning. However, participants highlighted challenges including geopolitical uncertainties, trade disruptions, regulatory changes, and cultural barriers, necessitating adaptive strategies and diversified sourcing options. Innovation initiatives such as joint product development and technology adoption were crucial in enhancing supply chain agility and competitive advantage. Ethical considerations emerged as a critical aspect, influencing supplier selection criteria, CSR initiatives, environmental sustainability practices, and labor standards compliance. Integrating ethical guidelines into supplier contracts reinforced corporate values and enhanced brand reputation. Overall, this study contributes practical implications for e-commerce practitioners seeking to enhance supply chain resilience, mitigate supplier risks, and sustain competitive advantage in a dynamic global marketplace.

This research investigates the pivotal role of Supplier Relationship Management (SRM) in enhancing e-commerce scalability. SRM practices are essential for optimizing supply chain operations and fostering strategic partnerships with suppliers, crucial in the dynamic and competitive e-commerce landscape. Through a comprehensive analysis of case studies, expert interviews, and secondary data, the study examines how leading e-commerce companies such as Amazon and Alibaba implement effective SRM strategies to achieve scalability. Key findings reveal that strategic supplier selection based on capabilities and alignment with business goals, coupled with continuous evaluation and development programs, ensures consistent supply chain performance and customer satisfaction. Technological advancements, including data analytics, artificial intelligence, and blockchain, play a transformative role in modern SRM by enhancing transparency, efficiency, and decision-making capabilities. These technologies enable real-time monitoring, automated processes, and risk mitigation strategies that bolster supply chain resilience and operational efficiency. Best practices in SRM, such as clear performance metrics, a culture of continuous improvement, and ethical sourcing policies, are critical for driving supplier accountability, innovation, and sustainability. Moreover, sustainability emerges as a growing priority in SRM, with businesses integrating environmental and social considerations into supplier management strategies to meet regulatory requirements and stakeholder expectations. Theoretical frameworks like the Resource-Based View and Transaction Cost Economics provide insights into the strategic implications of SRM, emphasizing its role in fostering competitive advantage and long-term business success. As e-commerce continues to evolve, businesses must adapt and innovate in their SRM approaches to navigate global supply chain complexities effectively. By prioritizing effective SRM practices, leveraging advanced technologies, and embracing sustainability, businesses can enhance their scalability, resilience, and competitiveness in the digital economy.

Effective management of supplier relationships is crucial for e-commerce companies to navigate complex supply chain dynamics and mitigate risks associated with supplier disputes. This qualitative study explores the strategies and challenges involved in resolving supplier disputes through relationship management in the context of e-commerce. Through semi-structured interviews with supply chain managers, procurement officers, and executives from diverse e-commerce firms, the study investigates key themes including communication strategies, trust-building initiatives, negotiation dynamics, technological integration, organizational culture, and global supply chain alignment. Findings reveal that clear and transparent communication plays a foundational role in preventing misunderstandings and fostering collaboration with suppliers. Trust-building initiatives, such as consistency in commitments and transparency in business dealings, are essential for cultivating resilient supplier relationships. Negotiation strategies emphasizing principled negotiation and collaborative problem-solving facilitate the resolution of disputes while preserving long-term partnerships. Technological integration through data analytics, automation, and digital platforms enhances operational efficiency and decision-making capabilities in managing supplier relationships. Organizational culture characterized by collaboration, innovation, and leadership commitment to strategic alignment with global supply chains promotes resilience and responsiveness to market dynamics. Challenges including power dynamics, operational constraints, and cultural differences underscore the importance of proactive risk management and cultural sensitivity in supplier relationship management. This study contributes actionable insights for practitioners to enhance supplier relationship management practices, navigate disputes effectively, and foster sustainable competitive advantage in e-commerce. By integrating these findings into strategic planning, e-commerce firms can strengthen supplier partnerships, optimize supply chain performance, and mitigate risks in a dynamic business environment.

This qualitative research explores the transformative role of Artificial Intelligence (AI) in Supplier Relationship Management (SRM) within the e-commerce sector. SRM is critical for e-commerce platforms to maintain efficient supply chains, optimize supplier interactions, and ensure competitive advantage in a dynamic marketplace. AI technologies offer advanced capabilities such as predictive analytics, machine learning algorithms, and natural language processing, which revolutionize traditional SRM practices by enhancing decision-making accuracy, mitigating supply chain risks, and fostering personalized supplier relationships. Through semi-structured interviews with 20 e-commerce professionals and industry experts, this study investigates AI's impact on supplier selection, operational efficiencies, and strategic supplier relationships. Findings highlight AI's ability to streamline supplier evaluation processes, improve demand forecasting accuracy, and optimize inventory management strategies. AI also facilitates personalized supplier engagement through sentiment analysis and real-time insights, promoting collaboration and trust. Ethical considerations, including algorithmic bias and data privacy, emerge as significant concerns in AI adoption for SRM. Addressing these challenges is crucial to maintaining stakeholder trust and ensuring responsible AI deployment. Furthermore, technological integration barriers and organizational readiness are identified as critical factors influencing successful AI implementation. Looking forward, the study underscores the potential of AI to drive innovation and competitiveness in e-commerce SRM, emphasizing the importance of ethical AI practices, technological infrastructure investments, and organizational preparedness for sustainable growth.

This qualitative research explores the integration of digital technologies to enhance supplier engagement in e-commerce, examining the transformative impact of AI, blockchain, and IoT on supplier relationship management (SRM). Through semi-structured interviews and documentary analysis with 15 industry experts, the study reveals that digital technologies enable organizations to optimize supply chain operations, improve transparency, and foster collaborative partnerships with suppliers. Strategic initiatives such as co-development projects and joint innovation efforts are pivotal in accelerating product development cycles and enhancing market competitiveness. Emotional intelligence (EI) emerges as critical in cultivating trust, empathy, and effective communication, underscoring the human dimension of supplier relationships amidst technological advancements. Challenges identified include technological complexity, data privacy concerns, and resistance to change, necessitating robust cybersecurity measures and proactive compliance strategies. Economically, organizations benefit from significant cost savings, improved efficiency, and enhanced profitability through digital transformation initiatives in SRM. By leveraging digital platforms and data-driven insights, organizations can optimize procurement processes, streamline operations, and mitigate risks to achieve sustainable growth and resilience.

Supplier Relationship Management (SRM) plays a pivotal role in enhancing delivery performance within the e-commerce sector, yet understanding its nuanced impacts remains crucial for optimizing operational efficiencies and customer satisfaction. This qualitative research explores the intricate dynamics of SRM in e-commerce, focusing on strategic alignment, technological integration, trust, collaboration, and risk management as key determinants of delivery reliability. Through in-depth interviews and thematic analysis, the study reveals that strategic alignment of supplier capabilities with firm objectives is fundamental for maintaining a responsive and synchronized supply chain. Technological integration, including AI-driven analytics and blockchain applications, emerges as critical for real-time monitoring and adaptive decision-making, thereby improving delivery accuracy and efficiency. Trust and collaboration are identified as essential pillars for building resilient supplier relationships, fostering transparent communication and joint problem-solving. Effective risk management practices, such as supplier diversification and contingency planning, mitigate disruptions and ensure consistent delivery performance. Despite these benefits, challenges such as technological adoption barriers, cultural differences, communication complexities, resource constraints, and supplier reliability issues persist, necessitating strategic interventions. Recommendations include investing in advanced SRM technologies, promoting cultural understanding, enhancing communication protocols, allocating adequate resources, and fostering collaborative initiatives with suppliers. These strategies aim to overcome challenges and optimize SRM practices, ultimately enhancing delivery performance and competitiveness in the e-commerce landscape.

This qualitative study explores collaborative supplier relationships within the context of e-commerce, aiming to uncover the dynamics, challenges, strategies, impacts, and future trends shaping these partnerships. Through thematic analysis of interviews with e-commerce platform managers, supplier representatives, and industry experts, the study identifies three primary types of relationships: transactional, relational, and strategic. Critical factors influencing these relationships include trust, effective communication, technological integration, and regulatory compliance. Challenges such as information asymmetry, cultural differences, logistical complexities, and competitive pressures are examined, alongside strategies for enhancing collaboration, including clear communication protocols, performance evaluations, and technological advancements. The findings highlight the significant impact of collaborative supplier relationships on business performance, including cost efficiencies, supply chain resilience, innovation capacity, customer satisfaction, and market competitiveness. Looking forward, trends in digital transformation, sustainability initiatives, global supply chain networks, resilience-building strategies, and industry collaboration are discussed as shaping the future landscape of e-commerce partnerships. Embracing these trends presents opportunities for organizations to innovate, adapt, and sustain growth in the competitive digital marketplace.

Supplier Relationship Management (SRM) tools play a crucial role in enhancing efficiency and competitiveness within e-commerce supply chains. This qualitative research explores the effectiveness of SRM tools in optimizing procurement processes, mitigating risks, and fostering collaborative partnerships with suppliers. The study employs semi-structured interviews with key stakeholders in diverse e-commerce sectors to gather insights into the implementation and outcomes of SRM tools. Findings reveal that technological advancements, including AI, blockchain, and data analytics, facilitate real-time communication, decision-making, and supply chain visibility, thereby enabling organizations to achieve cost savings and operational efficiencies. Enhanced supplier relationships through SRM tools contribute to collaborative innovation, faster product development cycles, and improved customer satisfaction. However, challenges such as technological complexity, regulatory compliance, and supplier resistance necessitate strategic management and investment in cybersecurity and compliance frameworks. The research underscores the importance of executive sponsorship, stakeholder engagement, and continuous improvement in driving successful SRM implementations.

This qualitative research explores Supplier Relationship Management (SRM) strategies within the context of e-commerce customization, aiming to understand how businesses effectively manage relationships with suppliers to meet personalized consumer demands. Through semi-structured interviews with industry professionals, key themes such as trust, communication, technological integration, strategic alignment, sustainability, and collaboration emerged as critical factors influencing SRM effectiveness. Trust was found to be foundational, fostering cooperation and commitment between e-commerce businesses and suppliers through transparent interactions. Effective communication and the integration of advanced technologies like AI and blockchain enhanced operational efficiency and innovation capabilities, enabling businesses to deliver tailored customer experiences. Strategic alignment between businesses and suppliers proved essential for shared success and mutual benefit, while sustainability practices increasingly shaped consumer preferences and brand reputation. Collaboration facilitated joint innovation and accelerated product customization, underscoring the importance of partnerships in achieving strategic goals. However, challenges including supply chain complexity, managing consumer expectations, and regulatory compliance highlighted the need for continuous improvement and adaptive strategies. Overall, this research contributes valuable insights for e-commerce businesses seeking to optimize SRM strategies, enhance supply chain efficiency, and navigate the complexities of customization in a competitive digital marketplace. By leveraging trust, communication, technology, strategic alignment, sustainability, and collaboration, businesses can effectively meet evolving consumer demands and achieve sustainable growth.

This qualitative research investigates the impact of Supplier Relationship Management (SRM) on e-commerce innovation adoption. Through semi-structured interviews and document analysis, the study explores how SRM practices influence organizational capabilities to innovate in the context of digital commerce. Key themes emerged, emphasizing the critical role of trust, communication, collaboration, strategic alignment, technology integration, organizational culture, leadership, and external factors in shaping e-commerce innovation. Trust was found to be foundational, fostering transparent communication and collaborative relationships that facilitate innovation. Effective communication channels and collaborative initiatives enabled organizations and suppliers to leverage combined expertise, driving the development of innovative e-commerce solutions. Strategic alignment ensured that both parties worked towards shared goals, supported by technology integration that enhanced operational efficiency and decision-making. Organizational culture and leadership were identified as crucial in creating environments conducive to continuous innovation. External factors such as market dynamics, regulatory requirements, and technological advancements influenced innovation strategies, highlighting the need for adaptive and responsive SRM practices. The findings underscore the interconnectedness of these factors within the SRM framework, offering insights into how organizations can enhance their innovation capabilities and competitiveness in the digital economy. By strategically managing SRM practices and integrating sustainable initiatives, organizations can navigate challenges, seize opportunities, and achieve sustained success in e-commerce innovation.

This qualitative study explores how businesses are adapting their Supplier Relationship Management (SRM) strategies to address the challenges and capitalize on the opportunities presented by evolving e-commerce trends. Through in-depth interviews with key industry stakeholders, the research investigates the integration of advanced technologies such as artificial intelligence (AI), blockchain, and the Internet of Things (IoT) into SRM practices. Findings reveal that these technologies enhance efficiency, transparency, and responsiveness within supply chains, enabling businesses to navigate complexities such as supply chain dynamics, fluctuating consumer demand, and regulatory compliance. The study identifies effective strategies employed by businesses, including enhancing communication channels with suppliers, diversifying supplier bases, and investing in technological advancements. These strategies enable businesses to mitigate risks, improve collaboration, and drive innovation, thereby maintaining competitive advantage in the digital marketplace. Collaborative practices such as joint product development, shared risk management, and co-investment in technology emerge as critical drivers of successful SRM. Ultimately, this research contributes to a deeper understanding of SRM in the context of e-commerce, offering insights into how businesses can optimize their supply chain operations amidst technological disruptions and market fluctuations. The findings underscore the importance of proactive adaptation and strategic alignment with suppliers to foster resilient and agile supply chains. As e-commerce continues to evolve, businesses must leverage these insights to refine their SRM strategies and sustain growth in an increasingly competitive environment.

This qualitative study explores the transformative role of Supplier Relationship Management (SRM) in the context of e-commerce, focusing on the integration of digital technologies and evolving supplier interactions. As digital advancements such as artificial intelligence, blockchain, data analytics, cloud computing, and the Internet of Things (IoT) reshape traditional SRM practices, e-commerce companies are experiencing significant improvements in efficiency, transparency, and collaboration. This research employs semi-structured interviews, document analysis, and case studies to examine the impact of these technologies on SRM, identify key collaborative practices, and assess risk management strategies. Findings indicate that digital integration enhances decision-making, streamlines operations, and fosters deeper, trust-based supplier relationships. AI facilitates predictive analytics and automates processes, while blockchain provides transparency and reduces fraud. Data analytics supports informed sourcing decisions and risk mitigation, and cloud platforms improve real-time collaboration. IoT enhances supply chain visibility, allowing for better inventory management. Despite these benefits, challenges such as high implementation costs, integration difficulties, data privacy concerns, and security risks remain significant barriers. Collaboration practices, including joint development, shared resources, and coordinated marketing, contribute to innovation and mutual growth, emphasizing the need for effective communication and trust. Risk management strategies, such as scenario planning and supplier diversification, are crucial for maintaining supply chain resilience. Strategic alignment between e-commerce companies and suppliers, including goal congruence and capability matching, is essential for seamless coordination and competitive advantage. The study underscores the importance of a holistic approach to SRM, integrating technology, collaboration, risk management, and strategic alignment to navigate the complexities of supplier relationships in the digital age. These insights provide a framework for e-commerce companies to optimize their SRM practices and achieve sustainable growth in a dynamic marketplace.

Unmanned vehicles (UVs) have become increasingly important in various scenarios of civil and military operations. The present work aims at the conceptual design of a modular Amphibious Unmanned Ground Vehicle (A-UGV), that can be easily adapted for different types of land and/or water missions, with low monetary cost (&lt;5k€, without sensors). Basing the design on the needs highlighted in the 2021 review of the Strategic Directive of the Portuguese Navy, the necessary specifications and requirements are established for two mission scenarios. Then a market research analysis focused on vehicles currently available, and their technological advances, is conducted to identify existing UVs solutions and respective characteristics/capabilities of interest to the current work. To study and define the geometry of the hull and the configuration of the A-UGV itself, preliminary computational structural and fluid analyses are carried out to ensure it complies with the specifications initially established. As a result, one obtains a fully electric vehicle, with approximate dimensions of 1050×670×450mm (length-width-height), enabled with 6×6 traction capable of reaching 20km/h in land, possesses amphibious capabilities of independent propulsion in water up to 8kts, and with an estimated autonomy of over 60 minutes.

Brain magnetic resonance imaging (MRI) offers a unique lens to study neuroanatomic support of human neurocognition and intelligence. A core mystery is the MRI explanation of individual differences in neurocognition and intelligence. The past four decades have seen great advancement in studying this century-long mystery, but the sample size and population-level studies limit the explanation at the individual level. The recent rise of big data and artificial intelligence offers novel opportunities. Yet, data sources, harmonization, study design, and interpretation need to be carefully considered. This review aims to summarize past work, discuss rising opportunities and challenges, and facilitate further investigations on machine intelligence inferring human intelligence.

Tropical forest and savanna biomes are pivotal in the functioning of the Earth system. Tropical forests are one of the largest terrestrial biosphere carbon pools, whereas savannas exchange carbon between the biosphere and atmosphere via frequent and extensive landscape fires. Both are biodiverse and under increasing threat due to land clearing and anthropogenic climate change. Reliable mapping of tropical forest and savanna is essential to provide understanding of how anthropogenic impacts are affecting the extent of these biomes. Using Google Maps satellite imagery, we manually classified 24,239 random points as forest, savanna, or anthropogenic landscapes within the tropics. Because fire and climate are correlated, we developed separate geospatial models to rank the importance of climate, topography, and human influence on vegetation present. This modelling confirmed that those areas with more fires had lower probabilities of tropical forest, that forest was most likely in areas with high mean annual rainfall with little seasonal variation in precipitation, and that anthropogenic factors disrupt this environmental predictability. We found there were environments where tropical forest and savanna were equally probable are geographically restricted. These relationships suggest that future drier climates projected under anthropogenic climate change, combined with clearing and burning that have reduced tropical forest extent to a subset of its theoretical distribution, will lead to irreversible loss of tropical forests. Our modelling provides global mapping that can be used track further changes to distribution of rainforests.

Most human genetic disease arises from point mutations. These genetic diseases can theoretically be corrected by gene therapy but clinic practice is still far from mature. Nearly half of the pathogenic single-nucleotide polymorphisms (SNPs) are caused by G:C>A:T or T:A>C:G base changes. The best current methods to repair these changes are by base editing without footprint using recently developed CRISPR-Cas9 technology by David Liu’s lab. These base editing methods have been confirmed with precision and efficiency in cultured mammalian cells, but it is barely confirmed and the efficiency is still very low. Animal models are important in dissecting pathogenic mechanism for human genetic diseases and efficacy testing of base correction in vivo. Cytidine base editor BE4 is a newly developed version of cytidine base editing system that converts cytidine (C) to uridine (U) in cultured mammalian cells but has not been proven in vivo. In this study, we have tested this system in cells to inactivate GFP gene and in mice by introducing single-base substitution that leads to a stop codon in tyrosinase gene. High percentage albino coat-colored mice were obtained from black coat-colored donor zygotes after pronuclei microinjection. Sequencing results showed that expected base changes were obtained with high precision and efficiency (56.25%). There are no off-targeting events identified in predicted off-target sites. Results confirm BE4 system can work in vivo with high precision and efficacy, and has great potentials in clinic to repair human genetic mutations.

Abstract: Due to sever land degradation throughout Ethiopia, the government has been implementing massive soil and water conservation works at the watershed scale since 2010 to conserve soil and water resources. However, most of the rivers in Ethiopia carry huge amount of sediment in rainy season and streams dried up in the dry period. Planned research was conducted on two paired micro-catchments Mt.Yewel with the main objective of evaluating the impact of soil and water conservation measures on base flow modification. Stream flow and rainfall data were collected from 22/11/2020 to 8/11/2022 on both micro-catchments at their outlets and center respectively. Base flow separation was done using Sp. Hydro base flow separation tool and SPSS Ver.21 statistical software was employed for data analysis. Flow duration curve (FDC) for both watersheds were developed. The FDC indicated that the base flow from treated micro-catchment ishigher and sustained in the dry season while it is low and un-sustained in untreated micro-catchment. From statistical analysis, there is a significant difference in base flow enhancement between the treated and untreated micro-catchment (P<0.001). Hence, catchment treatment contributed to improve groundwater recharge and sustain base flow in the dry season by reduce surface runoff during rainy season.

Abstract: Severe land degradation is the principal environmental problem in Ethiopian highlands in the form of soil erosion, and soil fertility loss, which is caused by human intervention for food, shelter, and energy demands. Soil erosion contributes to the loss of precious soil and water resources which are the basis of agricultural production and provide numerous other eco-system services. The Ethiopian highlands are one of the most degraded regions in the world. To combat such problems, the government of Ethiopia has been implementing massive soil and water conservation works at the watershed scale since 2010 to conserve soil and water resources. Mount Yewel is one of the highlands in Northeastern Ethiopia where intensive soil and water conserva-tion has been implemented. Despite the massive investment in soil and water conservation measures, most of the rivers in the highlands of Ethiopia carry huge amounts of sediment with high flood risks in the wet season and streams are dried up in the dry period. Nonetheless, the impact of soil and water conservation measures on flood reduction and dry season flow en-hancement has not yet been quantified and evaluated. This research was then conducted on paired micro-catchments of Mount Yewel with the main objective of evaluating the impact of soil and water conservation measures on base flow modification. Stream flow and rainfall data were col-lected from 22/11/2020 to 8/11/2022 on paired micro-catchments of Mount Yewel at their outlets and centers respectively. Base flow separation was done from the stream hydrograph using Sp. Hydro base flow separation tool and SPSS Ver.21 statistical software were employed for data analysis. Flow duration curves (FDC) for both watersheds were developed to compare the stream flow patterns between treated and untreated micro-catchments of Mount Yewel. The FDC indi-cated that the base flow from treated micro-catchment is higher and sustained in the dry season while it is low and unsustained in untreated micro-catchment. From statistical analysis, there is a significant (P

Relativistic atomic and molecular structure calculations start from very different premises to quantum electrodynamics (QED). QED predicts radiative corrections that can nly be approximated crudely in today's atomic structure programs. This paper describes rigorous simple algorithms for including accurate vacuum polarization and self-energy corrections in the GRASP programs.

In many countries, governments have implemented non-pharmaceutical techniques to limit COVID-19 transmission. Restricting human mobility is one of the most common interventions, including lockdown, travel restrictions, working from home, etc. However, due to the strong transmission ability of the virus variants, further rounds of interventions, including a strict lockdown, are not considered as effective as expected. The paper aims to understand how the lockdown policy and pandemics changed human mobility in the real scenario. Here we focus on understanding the mobility changes caused by compliance with restrictions and risk perceptions, using the mobility index from the Google report during three strict lockdown periods in Leeds, the largest city in the county of West Yorkshire, England from March 2020 to March 2021. The research proposed the time-varying z-scores and Principal Component Analysis (PCA) to simulate how local people dynamically process and perceive health risk based on multi-dimensional daily COVID-19 reports first. Further modelling highlights exponentially increasing policy non-compliance through the duration of lockdown, probably attributable to factors such as mental anxiety and economic pressures. Finally, the proposed nonlinear regression model examines the mobility changes caused by the population's dynamic risk perceptions and lockdown duration. The case study at Leeds fits data well and shows that the third lockdown policy took effect much slower than the first. At the same time, the negative impact of the epidemic on population mobility decayed 40% in the third lockdown period in contrast with the first lockdown. The risk perception estimation methods could reflect that the local population became increasingly accustomed to the COVID-19 situation, and local people rationally evaluated the risks of COVID in the third lockdown period. The results prove that simulated risk perceptions and policy decay could explain urban mobility behaviour during the mobility well during lockdown periods, which could be a reference for future decision-making processes.

Fire risk can be defined as the probability that a fire will spread. Reliable monitoring of fire risk is essential for effective landscape management. Compilation of fire risk records enable identification of seasonal and inter-annual patterns and provide a baseline to evaluate the trajectories in response to climate change. Typically, fire risk is estimated from meteorological data. In regions with sparse meteorological station coverage environmental proxies provide important additional data stream for estimating past and current fire risk. Here we use a 60-year record of daily flows from two rivers (Franklin and Davey) in the remote Tasmanian Wilderness World Heritage Area (TWWHA) to characterize seasonal patterns in fire risk in temperate Eucalyptus and rainforests. We show that river flows are strongly related to landscape soil moisture estimates derived from down-scaled re-analysis of meteorological data available since 1990. To identify river flow thresholds where forests are likely to burn, we relate river flows to known forest fires that have occurred in the previously defined ecohydrological domains that surround the Franklin and Davey catchments. Our analysis shows that the fire season in the TWWHA is centered on February (70% of all years below the median threshold), with shoulders on December-January and March. Since 1954 forest fire can occur in at least one month for all but four summers in the ecohydrological domain that includes the Franklin catchment, and since 1964 fire fires could occur in at least one month in every summer in the ecohydrological domain that includes the Davey catchment. Our analysis shows that mangers can use river flows as a simple index that provide a landscape-scale forest fire risk in the TWWHA.

To make wind power more competitive, it is necessary to reduce turbine downtime and reduce costs associated with wind turbine Operation and Maintenance (O&amp;M). Incorporating machine learning in developing condition-based predictive maintenance methodologies for wind turbines can enhance their efficiency and reliability. This paper presents a monitoring method that utilizes Base Density for the Support Vector Machine (BDSVM) and the evolutionary Fourier spectra of vibrations. This method allows smart monitoring of the function evolution of the turbine. A complex optimal function (FO) for 5-degree order has been developed that will be the boundary function of the BDSVM to timely determine the magnitude, frequency, and place of the failure occurring in wind turbine drive.

Seaports are critical hubs in global trade, facing increasing pressure to accelerate green transi-tions while navigating evolving economic and environmental landscapes. This research analyses the intricate relationship between port organizational ecosystem resilience and the successful implementation of green transitions, highlighting the challenges and opportunities in moving towards a more sustainable future. The research employed a combined focus group interview and participatory observation methodology to gather insights from experts. Analysis revealed that while technological advancements are a primary driver for greening port operations, a lack of managerial capacity is a significant impediment to the successful integration of these innova-tions. It was identified several challenges, including outdated infrastructure, cybersecurity threats, and the need for ongoing investments in new technologies, along with the need to foster a sustainable behaviour culture. Experts emphasized the importance of developing managerial competencies and continuous learning. The research also highlights the role of strong stake-holder partnerships, including collaboration with government agencies, industry associations, and environmental organizations. This research provides valuable insights for policymakers, port managers, and other stakeholders seeking to navigate the challenges for ensuring a sus-tainable future for the maritime sport organizational ecosystems and maritime industry.

A U.S. government health agency conducted epidemiological studies to evaluate whether exposures to drinking water contaminated with volatile organic compounds at U.S. Marine Corps Base Camp Lejeune, North Carolina, were associated with increased health risks to children and adults. These health studies required knowledge of contaminant concentrations in drinking water—at monthly intervals—delivered to family housing, barracks, and other facilities within the study area. Because concentration data were limited or unavailable during much of the period of contamination (1950s–1985), the historical reconstruction process was used to quantify estimates of monthly mean contaminant-specific concentrations. This paper integrates many efforts, reports, and papers into a synthesis of the overall approach to, and results from, a drinking-water historical reconstruction study. Results show that at the Tarawa Terrace water treatment plant (WTP) reconstructed (simulated) tetrachloroethylene (PCE) concentrations reached a maximum monthly average value of 183 micrograms per liter (ug/L) compared to a one-time maximum measured value of 215 ug/L and exceeded the U.S. Environmental Protection Agency’s current maximum contaminant level (MCL) of 5 ug/L during the period November 1957–February 1987. At the Hadnot Point WTP, reconstructed trichloroethylene (TCE) concentrations reached a maximum monthly average value of 783 ug/L compared to a one-time maximum measured value of 1,400 ug/L during the period August 1953–December 1984. The Hadnot Point WTP also provided contaminated drinking water to the Holcomb Boulevard housing area continuously prior to June 1972, when the Holcomb Boulevard WTP came on line (maximum reconstructed TCE concentration of 32 ug/L) and intermittently during the period June 1972–February 1985 (maximum reconstructed TCE concentration of 66 ug/L). Applying the historical reconstruction process to quantify contaminant-specific monthly drinking-water concentrations is advantageous for epidemiological studies when compared to using the classical exposed versus unexposed approach.

During recent years there is an on-going deployment of 5G base stations for radiofrequency (RF) communication in Sweden as well in many other countries. This is made without investigations on risks to human health and the environment. Since 2016 we have made several measurements of environmental exposure to RF radiation in Stockholm, Sweden, including previous generations and now also 5G. In the current study, performed in October 2023, the broadband meter Narda-550 with the probe EF-1891 was used. It gives results in the root mean square (RMS) mode, thus not peak levels. Both the International Commission on Non-Ionizing Radiation Protection (ICNIRP) and the US Federal Communications Commission (FCC) base their guidelines on RMS levels of RF radiation. Measurements were made in similar city areas as in our previous studies. Results show that the RF radiation has increased substantially. High maximum levels were found at e.g. the Central Railway Station (3 637 191 µW/m2), and popular walking streets such as Mäster Samuelsgatan (11 613 976 µW/m2), and Drottninggatan (5 271 555 µW/m2). The peak values would be much higher. These levels are in the same magnitude or even higher than those measured in homes of persons that rapidly developed symptoms of the microwave syndrome after installation of 5G, usually in combination with 4G+, in the neighborhood. They are also substantially higher than levels that have previously been linked to cancer and the microwave syndrome in studies of people living near base stations and masts from previous generations of telecommunications.

A neglected dimension of the fire regime concept is fire patchiness. Habitat mosaics that emerge from the grain of burned and unburned patches (pyrodiversity) are critical for the persistence of a diverse range of plant and animal species. This issue is of particular importance in frequently burned tropical Eucalyptus savannas, where coarse fire mosaics have been hypothesized to have caused the recent drastic population declines of small mammals. Satellites routinely used for fire mapping in these systems are unable to accurately map fine-grained fire mosaics, frustrating our ability to determine whether declines in biodiversity are associated with local pyrodiversity. To advance this problem, we have developed a novel method (we call ‘double-differenced dNBR’) that combines the infrequent (c. bi-monthly) detailed spatial resolution Landsat with daily coarse scale coverage of MODIS and VIIRS to map pyrodiversity in the savannas of Kakadu National Park. We used seasonal Landsat mosaics and differenced Normalized Burn Ratio (dNBR) to define burned areas, with a modification to dNBR that subtracts long-term average dNBR to increase contrast. Our results show this approach is effective in mapping fine-scale fire mosaics in the homogenous lowland savannas, although inappropriate for nearby heterogenous landscapes. Comparison of this methods to other fire metrics (e.g., area burned, seasonality) based on Landsat and MODIS imagery suggest this method is likely accurate and better at quantifying fine-scale patchiness of fire, albeit it demands detailed field validation.

Here we report the preparation and characterization of a novel biomimetic toothpaste containing morphogenetically active amorphous polyphosphate (polyP) microparticles enriched with retinyl acetate (“a-polyP/RA-MP”). The spherical microparticles (average size, 550±120 nm), prepared by co-precipitating sodium-polyP with calcium chloride and supplemented with retinyl acetate, were incorporated into a basis toothpaste at a final concentration of 1% or 10%. The paste containing “a-polyP/RA-MP” significantly increased the growth of human mesenchymal stem cells (MSC), compared to a commercial toothpaste which acts rather inhibitory and the paste without polyP and retinyl acetate. qRT-PCR experiments revealed that the retinoid causes an induction of the expression of the MSC marker genes for osteoblast differentiation encoding collagen type I and alkaline phosphatase. On the other hand, the polyP ingredient, supplied as Zn-polyP microparticles (“Zn-a-polyP-MP”) strongly inhibited the growth of the cariogenic bacterium Streptococcus mutans. We demonstrate that the amorphous polyP-containing toothpaste, enriched with retinyl acetate, efficiently repairs both cracks/fissures and carious lesions in the tooth enamel, and reseals dentinal tubules, already after a 5 d treatment (brushing) of teeth twice daily for 5 min as examined by SEM and quantitative EDX analysis. The stability of the occlusion of dentin cracks even turned out to resist against short high power sonication treatment. Our results demonstrate that the novel toothpaste prepared here, containing amorphous polyP and retinyl acetate, is particularly suitable for prevention/repair of (cariogenic) damages of tooth enamel/dentin and for treatment of dental hypersensitivity.

Studies into the cognitive effects of alcohol have been mixed. They also present methodological challenges, often relying on self-report of alcohol consumption leading to hangover. The current study used BAC (obtained via breathalyser) and self-reported drinking behavior during a night out and related these to hangover severity and cognitive function measured over the internet in the same subjects the following morning. Volunteers were breathalysed and interviewed as they left a central entertainment district of an Australian state capital. They were provided with a unique identifier and, the following morning, logged on to a website. This included an online version of the Alcohol Hangover Severity Scale (AHSS), and number and type of drinks consumed the previous night and the eTMT-B - a validated, online analogue of the Trail Making Test B of executive function and working memory. Hangover severity was significantly correlated with one measure only, namely the previous night’s BAC (r = .228, p = .019). Completion time on the eTMT-B was significantly correlated with hangover severity ( r = .245, p = .012), previous night’s BAC (r = .197, p = .041) and time spent dinking (r = .376, p < .001). These findings confirm that alcohol hangover negatively affects cognitive functioning and that poorer working memory and executive performance correlates with hangover severity. The results also support the utility of using online measures in hangover research.

Food security (FS) during infancy is associated with lifelong outcomes. New Zealand is a developed economy that reports poor childhood nutrition-related health statistics, particularly among minority children, yet has no measure of FS applicable to infancy. The objective was to develop a FS index for New Zealand infants and examine its association with demographic covariates and health outcomes. Within a large (n=6853) nationally representative cohort, variables describing infant food consumption, breastfeeding, and maternal food-related coping methods were collected from mothers during late infancy. A FS index was derived using confirmatory factor analysis. Associations were assessed by logistic regressions and described using odds ratios (OR) and ≥95% confidence intervals (CI). 15% of the cohort was highly FS, 43% tenuously food insecure (FIS), and 16% highly food insecure (FIS). Infants from minority ethnic groups had lower odds of being food secure, as did those born to the youngest mothers, mothers who smoked, or lived in low-income households. FIS infants had higher odds of morbidity. Interventions to improve infant FS should focus on improving dietary quality, and give particular consideration to minority infants. We identified that FIS shows wide ethnic and socioeconomic inequity, and is associated with poorer health. The most important driving factors of FIS included poor quality weaning diets, and poverty and its proxies. Any interventions to improve infant FS should focus on increasing fruit and vegetable consumption to recommended intake levels, and give particular consideration to minority infants.

Bamboo is considered a sustainable construction material due to its ability to grow quickly and its mechanical properties that are comparable to timber. Contributing to the current effort to establish the structural bamboo standards in the National Structural Code of the Philippines (NSCP), this study establishes the characteristic compressive strength of four bamboo species: Bambusa vulgaris (36 samples), Dendrocalamus asper (36 samples), Bambusa blumeana (94 samples), and Guadua angustifolia Kunth (30 samples). The samples were subjected to compressive loading following ISO 22157-1 (2017). The characteristic compressive strength values obtained, according to ISO 12122-1 (2014), were 40.35 MPa for B. vulgaris, 40.21 MPa for D. asper, 46.63 MPa for B. blumeana, and 36.99 MPa for G. angustifolia Kunth. Simple linear analysis, One-way ANOVA, and Welch’s t-Test were used to analyze the correlation models and establish a comparative analysis of the effect of nodes, and geometric and physical properties on the compressive strength of bamboos. Comparing the characteristic compressive strength obtained from this study to the strength of unseasoned structural timber of Philippine woods, all bamboo species showed higher strength values, and thus have great potential as an alternative construction material to timber.

Electrical microgrids are deemed to be the future of modern power systems. Microgrids are sophisticated, decentralized, and self-sufficient small-scale power systems consisting of various resources ranging from wind turbines, solar photovoltaics, electric vehicles, smart energy storage, and complex communication infrastructure. However, renewable energy sources such as solar photovoltaics and wind-based generators are highly intermittent, and if not appropriately planned, they can compromise the stability of the grid. Formal methods can define and analyze the functionality and behavior of any system and show if the system design is correct before the actual system is implemented. Although formal methods have been around for many years, it is surprising that little to none are utilized in the design of safety-critical electrical power systems. Currently, in modeling microgrids, few to no attempts of formalization are being used to improve the design reliability and reduce system operating costs and time. This work demonstrates how complex systems such as microgrids can be modeled elegantly using a formal specification method. In this work, the Z state-based formal specification language (Z-Method) is used to model and verify microgrid designs. In this work, 3-interconnected microgrid systems with a high penetration level of solar and wind-based renewable energy sources with plugin hybrid electric vehicles (PHEV) as battery energy storage systems (BESS) are modeled using the Z-method. To the best of authors, the knowledge presented formal method is one of the first reported attempts in modeling microgrid communities using Software Engineering formalism.

Continuous-variable quantum key distribution (CV-QKD) shows potential for the rapid development of an information-theoretic secure global communications network; however, the complexities of CV-QKD implementation remain a restrictive factor. Machine learning (ML) has recently shown promise in alleviating these complexities. ML has been applied to almost every stage of CV-QKD protocols, including ML-assisted phase error estimation, excess noise estimation, state discrimination, parameter estimation and optimization, key sifting, information reconciliation, and key rate estimation. This survey provides a comprehensive analysis of the current literature on ML-assisted CV-QKD. In addition, the survey compares the ML algorithms assisting CV-QKD with the traditional algorithms they aim to augment, as well as providing recommendations for future directions for ML-assisted CV-QKD research.

Microbiome research has gained considerable interest due to the emerging evidence of its impact on human and animal health. Similar to higher organisms, the gut-associated microbiota of mosquitoes affect host fitness and other phenotypes. It is now well established that microbes can alter pathogen transmission in mosquitoes, either positively or negatively, and avenues are being explored to exploit microbes for vector control. However, less attention has been paid to how microbiota affect phenotypes that impact vectorial capacity. Several mosquito and pathogen components, such as vector density, biting rate, survival, vector competence and pathogen extrinsic incubation period all influence pathogen transmission. Interestingly, the mosquito gut-associated microbes can impact each of these components, and therefore ultimately modulate vectorial capacity. Promisingly, this expands the options available to exploit microbes for vector control by also targeting parameters that affect vectorial capacity. However, there are still many knowledge gaps in the biology of the mosquito – microbe symbiosis that need to be addressed in order to understand these interactions more thoroughly and exploit them efficiently. Here, we review current evidence of the impacts of the microbiome on aspects of vectorial capacity highlighting opportunities for novel vector control strategies and areas where further studies are required.

A random variable X that is base b Benford will not in general be base c Benford when c is not equal to b. This paper builds on two of my earlier papers and is an attempt to cast some light on the issue of base dependence. Following some introductory material, the “Benford spectrum” of a positive random variable is introduced and known analytic results about Benford spectra are summarized. Some standard machinery for a “Benford analysis” is introduced and combined with my method of “seed functions” to yield tools to analyze the base c Benford properties of a base b Benford random variable. Examples are generated by applying these general methods to several families of Benford random variables. Berger and Hill's concept of “base-invariant significant digits” is discussed. Some potential extensions are sketched.

This study aimed to determine whether camelina oil is safe for use in canine diets, using canola oil and flax oil as controls as they are similar and generally regarded as safe (GRAS) for canine diets. Thirty privately-owned adult dogs of various breeds (17 females; 13 males), with an average age of 7.2 ± 3.1 years (mean ± SD) and body weight (BW) of 27.4 ± 14.0 were used. After a 4-week wash-in period using sunflower oil and kibble, dogs were blocked by breed, age, and size, and randomly allocated to one of three treatment oils (camelina (CAM), flax (FLX), or canola (OLA)) at a level of 8.2 g oil/100g total dietary intake. Body condition score (BCS), BW, food intake (FI), and hematological and select biochemical parameters were measured at various timepoints over a 16-week feeding period. All data were analyzed with ANOVA using PROC GLIMMIX of SAS. No biologically significant differences were seen between treatment groups for BW, BCS, FI, hematological and biochemical results. Statistically significant differences noted among some serum biochemical results were considered small and due to normal biological variation. These results support a conclusion that camelina oil is safe for use in canine nutrition.

Milk fat production is important in the New Zealand (NZ) dairy industry. Elsewhere, an amino acid substitution (K232A) in the enzyme diacylglycerol acyl-CoA acyltransferase (DGAT1) has been reported to explain variation in some milk traits, including variation in milk fatty acid (FA) profile. In this study, associations between K232A, and milk traits including milk FA composition, were studied in wholly pasture-fed NZ Holstein-Friesian × Jersey (HF×J) cross-bred dairy cows. With a high frequency of K variant (61.9%), the KK cows produced more milk fat than the AA cows (5.41 ± 0.04 % vs 4.42 ± 0.05 %). The milk volume, fat concentration and protein concentration of AK cows were between the genotypes, AA and KK. More C16:0, CLA and C18:3 cis-9, 12, 15 FA were found in the milk of Kiwi-cross cows feed in outdoor pasture grazing system., and the influence of DGAT1 K232A, on these FAs from mid- and late lactation stages were significant. The AA cows produced (P < 0.001) more CLA and C18:3 cis-9, 12, 15, but less C16:0 (1.137 ± 0.047, 0.855 ± 0.015 and 35.170 ± 0.355) than the KK cows (0.934 ± 0.025, 0.778 ± 0.009 and 38.010 ± 0.250).

Mountain fire can become more complex than fires at lower elevation due to the complex interaction of fire, topography, and weather. The Gell River Fire in Tasmania, Australia occurred in rugged terrain where there are abundant fire sensitive vegetation communities, as well as the presence of infrastructure including high-voltage transmission lines. The fire began at the end of December 2018 and lasted a few months, with a final burnt area of approximately 350km² despite significant fire suppression effort. The fire was investigated by employing wind vector maps, numerical weather model vertical sounding charts (NWMVS) and Prototype 2, which is an integrated fire simulator and can detect lateral fire channeling (LFC). Our analysis of the fire found its spread was likely to be introduced into a valley by forced channeling (FC), which is modified synoptic wind, and showed rapid spread in the valley. The simulated fire also showed wider spread than the observed data in the valley, with the simulated fire impacting highly sensitive vegetation communities on the fringes of the valley. This alludes to some potential conclusions: (1) The loss of fire sensitive vegetation would have increased if fire suppression activity had not been conducted. (2) Spotting fires could be produced by LFC because these spotting fire would allow spreading fire in a shorter period. (3) Heterogeneity of vegetation, such as combination of buttongrass and forest, could help carry fire rapidly in the valley with LFC. Fire can propagate faster in buttongrass than in forests while the forests allow the spotting fire.

Unmanned aerial vehicles serving as air base stations (UAV-BSs) are used in telecommunications, when the network is overloaded or unavailable, providing access to users on the ground. Due to its dynamics of providing access to networks in different altitudes, the electromagnetic signal of UAVs suffers losses along the path, thus facing several problems related to transmission, such as: attenuation, fading and distortion. In this work is proposed a 3D positioning strategy for UAVs, taking into account height, coverage radius and flight energy efficiency. Results show that the proposed algorithm is able to position the UAVs in suboptimal locations, providing network access for mobile users, maximizing the number of connected devices in the UAV-BS and saving energy, thus obtaining better performance than the approaches conventional.

In 1990 the Malaysian Government launched Vision 2020 with the goal of Malaysia becoming a ‘fully developed country’ by the year 2020. In this drive for development the country has been examining many of its key natural assets, exploring how to both preserve them whilst ensuring that they make the maximum possible contribution to national development goals. Endau Rompin is one of these assets, being the second largest National Park in Peninsula Malaysia. The rich tropical rainforest flora and fauna of the Park and its hinterland, however, are threatened by various anthropogenic forces, most notably deforestation and poaching; both of which have taken the Park’s flagship species - the Tiger Panthera tigris jacksoni – towards the brink of local extinction. Malaysia’s statutory East Coast Economic Region Development Council commissioned a study to consider ways of increasing tourism revenues from the Park while at the same time reversing these threats. The key conclusion drawn is that a more holistic, landscape-scale approach should be adopted, with Endau Rompin forming part of a wider strategic economic zone based around sustainable tourism and land management. The proposed expanded zone extends eastwards beyond the confines of the Park, across the coastal plain to the South China Sea, and onwards to the neighbouring Mersing Islands. This expanded zone is referred to as Malaysia’s new ‘Rainforest to Reef Region’.

The temperature effect plays an important role for an accurate determination of the polar free energy, polar thermodynamic parameters, and enthalpic and entropic Lewis’s acid base properties of oxides, polymers and composites polymers/oxides. The adsorption of polymers on other solid surfaces is crucial in many industrial applications, coatings, paints, catalysis, colloids and adhesion processes. (1) Background: Inverse gas chromatography at infinite was used for the physico-chemical characterization of solid substrates by determining the thermodynamic parameters of adsorption of model organic solvents on solid surfaces such as polymers, metallic oxides, carbon fibers, pharmaceutical or 3D/4D printing substrates. (2) Methods: A new method based on the London dispersion equation was applied with a new parameter associating the deformation po-larizability and the harmonic mean of the ionization energies of solvent. More accurate values of the dispersive and polar interaction energies of the various organic solvents adsorbed on PMMA in bulk phase and PMMA/silica at different recovery fractions were obtained as well as the Lewis acid-base parameters and the transition temperatures of the different composites. (3) Results: This new methodology gave very interesting results on the behavior of PMMA adsorbed on silica. An important effect of the temperature and the recovery fraction on the various physicochemical and thermodynamic properties was highlighted. The variations of all interaction parameters showed the presence of three transition temperatures for the different PMMA adsorbed on silica with the various coverage rates with a shift of these temperatures for a recovery fraction of 31% (4) Con-clusions: An important variation of the polar enthalpy and entropy of adsorption, the Lewis ac-id-base parameters and the intermolecular separation distance as a function of the temperature and the recovery fraction of PMMA on silica.

Navigating growth cones are exposed to multiple signals simultaneously and have to integrate competing cues into a coherent navigational response. Integration of guidance cues is traditionally thought to occur at the level of cytoskeletal dynamics. Drosophila studies indicate that cells exhibit a low level of continuous caspase protease activation, and that axon guidance cues can activate or suppress caspase activity. We base a model for axon guidance on these observations. By analogy with other systems in which caspase signaling has non-apoptotic functions, we propose that caspase signaling can either reinforce repulsion or negate attraction in response to external guidance cues by cleaving cytoskeletal proteins. Over the course of an entire trajectory, incorrectly navigating axons may pass the threshold for apoptosis and be eliminated, whereas axons making correct decisions will survive. These observations would also explain why neurotrophic factors can act as axon guidance cues and why axon guidance systems such as Slit/Robo signaling may act as tumor suppressors in cancer.

A series of novel indole Schiff base derivatives (2a–2t) containing a 1,3,4-thiadiazole scaffold modified with a thioether group were synthesized, and their structures were confirmed using FT-IR, ¹H NMR, ¹³C NMR, andHR-MS. In addition, the antifungal activity of synthesized indole derivatives was investigated against Fusarium graminearum (F. graminearum), Fusarium oxysporum (F. oxysporum), Fusarium moniliforme (F. moniliforme), Curvularia lunata (C. lunata), and Phytophthora parasitica var. nicotiana (P. p. var. nicotianae) using the mycelium growth rate method. Among the synthesized indole derivatives, compound 2j showed the highest inhibition rates of 100%, 95.7%, 89%, and 76.5% at a concentration of 500 μg/mL against F. graminearum, F. oxysporum, F. moniliforme, and P. p. var. nicotianae, respectively. Similarly, compounds 2j and 2q exhibited higher inhibition rates of 81.9% and 83.7% at a concentration of 500 μg/mL against C. lunata. In addition, compound 2j has been recognized as a potential compound for further investigation in the field of fungicides.

Background/Objectives: Women's reproductive and overall well-being are intricately associated to vitamin D levels. In Morocco, vitamin D deficiency is a major issue for premenopausal women, yet little data exists on their dietary intake of this nutrient. This study explores vitamin D dietary intake, socio-demographic determinants, and its correlation with serum 25-hydroxyvitamin D [25(OH)D3] in premenopausal Moroccan women. Methods: A cross-sectional study was conducted with 355 women aged 18-49 in Meknes, Morocco, using validated questionnaires to assess dietary intake and sun exposure. Potential covariates such as physical activity and BMI were also assessed . Serum 25(OH)D was measured via chemiluminescence immunoassay. Chi-square tests and Spearman correlation were used to identify socio-demographic factors influencing vitamin D intake. Linear and multivariate regression analysis determined the main predictors of serum 25(OH)D levels. Results :The median (interquartile range) vitamin D dietary intake was 2.8 (2.7) µg/day , with less than 20% of women meeting the recommended 5 µg/day. Major dietary sources were fish (48%), dairy (24.3%), and meat (9.4%), with fortified foods contributing only for 7%. Lower intake was linked to younger age (p=0.004) and rural living (p=0.024). While no significant association was found between dietary intake and serum 25(OH)D ((β(SE): 0.155(0.094), p=0.340 ) , sun exposure positively predicted serum levels(β(SE): 0.343 (0.128), p=0.008) , and BMI negatively affected them (β(SE): -1.128 (0.337), p=0.001). Conclusions: Our findings highlight insufficient vitamin D intake among premenopausal Moroccan women, especially younger and rural women. Nutritional interventions are needed to address this deficiency, promoting better dietary habits, sun exposure, and healthy weight.

The cause of sarcoidosis is unknown, and vitamin D is contraindicated to treat the condition. We therefore ask what causes sarcoidosis and why vitamin D can be dangerous for those so afflicted. We propose a contrary hypothesis: sarcoidosis is a physiological process of defense against cancer that requires the substrate vitamin D. We tested this hypothesis, finding many case reports involving sarcoidosis and cancer—further cases of cancer mimicry by sarcoidosis. Several reports describe spontaneous healing of cancer in the presence of sarcoidosis. In the context of the granulomas of sarcoidosis, monocytes are the site of vitamin D release. Furthermore, active vitamin D can control cancer cells by using the vitamin D receptors of the nucleus. That granulomas consistently do not caseate is explained as a confrontation with human molecules and the cancer cells’ complete absorption. The striking fact that granulomas of sarcoidosis mostly lack cancerous cells is interpreted as a result of a well-functioning sarcoidosis process. We view the typical sarcoidosis monocytic synthesis of active vitamin D as a successful defense against cancer: a theory we call the “endogenous program organizing cancer apoptosis” (EPOCA).

Tunicate orthologs in the human genome comprise just 84 genes of the 19,872 protein-coding genes, yet they stand at the base of the Olfactores clade - which radiated to generate thousands of tunicate and vertebrate species. What were the powerful drivers among the 84 that enabled this process? Many of these orthologs are present in gene families. We discuss the biological role of each family and the orthologs’ quantitative contribution to the family. Most important was the evolution of a second type of cadherin. This, a Type II cadherin, had the property of detaching the cell containing that cadherin from cells that expressed the Type I class. The set of such Type II cadherins could now detach and move away from their Type I neighbours, a process which would eventually evolve into the formation of the neural crest, “ the fourth germ layer”, providing a wide range of possibilities for further evolutionary invention. A second important contribution were key additions to the broad development of the muscle and nerve protein and visual perception tool-kits. These developments in mobility and vision provided the basis for the development of the efficient predatory capabilities of the Vertebrata.

Inverse gas chromatography at infinite dilution was used to determine the surface thermodynamic properties of silica particles and PMMA adsorbed on silica, and more particularly, to quantify the London dispersive energy γsd, the Lewis acid γs+ and base γs- polar surface energies of PMMA/silica composites as a function of the temperature and the recovery fraction θ of PMMA. The polar acid–base surface energy γsAB and the total surface energy of the different composites were then deduced as a function of the temperature. In this paper, the Hamieh thermal model was used to quantify the surface thermodynamic energy of poly methyl methacrylate (PMMA) adsorbed on silica particles at different recovery fractions. A comparison of the new results was carried out with those obtained by applying other molecular models of the surface areas of organic molecules adsorbed on the different solid substrates. An important deviation of these molecular models from the thermal model was proved. The determination of γsd, γs+, γs-, and γsAB of PMMA in both bulk and adsorbed phases showed an important non-linearity variation of these surface parameters as a function of the temperature. The presence of maxima in the curves of γsd(T) highlighted the second order transition temperatures in PMMA showing beta-relaxation, glass transition and liquid-liquid temperatures. These three transition temperatures depended on the adsorption rate of PMMA on silica. The proposed method gave a new relation between the recovery fraction of PMMA and its London dispersive energy showing an important effect of the temperature on the surface energy parameters of adsorption of PMMA on silica. A universal equation relating γsd(T,θ) of the systems PMMA/silica to the recovery fraction and the temperature was proposed.

This research was devoted to study the effect of the tacticity of PMMA on the surface physicochemical properties such as the London dispersive component of the surface energy of the polymer, the polar and dispersive free energies, the Lewis’s acid-base surface parameters, and the Lewis acid and base surface energies of atactic, isotactic and syndiotactic PMMAs as a function of the temperature. Inverse gas chromatography (IGC) at infinite dilution was used to determine the surface thermodynamic properties of PMMA at different tacticities. The experimental values of the net retention time and volume of model organic molecules adsorbed on the atactic, isotactic and syndiotactic PMMAs, were obtained by IGC technique at infinite dilution. The London dispersion interaction energy was used for the separation of the polar and dispersive energy of the different n-alkanes and polar solvents adsorbed on the different PMMA surfaces. The London dispersive surface energy γ_s^d (T) of PMMAs was determined by applying the Hamieh thermal model that took into account the effect of the temperature on the surface area of adsorbed molecules. The obtained results showed non-linear variations of γ_s^d (T) of atactic, isotactic, and syndiotactic PMMAs with three maxima characterizing the three transition temperatures of PMMAs, T_g, T_g and T_(liq-liq) with a shift of these temperatures with the isotactic and syndiotactic PMMAs. It was showed that the polar interaction free energy ∆G_a^p (T) also showed the presence of the three above transition temperatures of the polymers. The study showed an important non-linearity variation of the different acid-base parameters in the various polymer surfaces proving the highest effect of the temperature and the tacticity on these parameters. The determination of the enthalpic and entropic Lewis’s acid-base parameters showed an amphoteric character for the different PMMAs. The basicity of the atactic PMMA was about four times larger than its acidity outside the neighborhood of the transition temperatures of the polymer. Whereas, the isotactic PMMA was about 2 to 2.5 times more basic than acid, while the syndiotactic PMMA exhibited the highest basicity by showing a surface 5 to 8 times more basic than acid. However, the Lewis acid-base parameters strongly depended on the temperature and sudden variations of these surface parameters were observed around the transition temperatures largely depending on the PMMA tacticity. The determination of the polar acid and base surface energies of the three PMMAs led to the same previous transition temperatures with an important effect of the tacticity of PMMA on the values of these acid-base surface energies.

A new low-pass filter (LPF) circuit with independent adjustment of various, incl. digitally controlled, pole frequency resistors, pole quality factor and transmission coefficient. The proposed low-pass filter is based on the use of the properties of a multi-differential operational amplifier that performs the functions of a signal adder. The peculiarity of the filter is that it has three inputs, with respect to which different transmission coefficients are implemented, incl. inverting (-1) and non-inverting (+1). To check these properties of a low-pass filter in the Micro-Cap environment, computer simulation of a specific circuit was performed on a multi-differential operational amplifier AD 8130. Mathematical expressions are given for the main parameters of the proposed low-pass filter, which allow parametric synthesis of elements of a specific circuit under given restrictions on the used element base.

At present, in the field of aviation industry, titanium alloy is mainly used to manufacture parts such as compressor disc, blade and casing of aircraft engine. When working, titanium alloy parts produce high temperature due to high-speed running friction, which makes the high temperature oxidation resistance and friction resistance of titanium alloy greatly reduced. When their working environment contains salt, titanium alloys are subjected to thermal corrosion, which limits their wider practical applications. This paper introduce the aluminide coating and its preparation methods. The characteristics and functional mechanism of three functional coatings for service environment, such as high temperature resistant alumina-based coating, thermal corrosion resistant alumina-based coating and wear-resistant alumina-based coating are summarized. Finally, the development direction of composite coatings of titanium and titanium alloys for complex service environment is prospected.

In the polar region, the gravity vector and Earth's rotation vector tend to be in the same direction, leading to slower convergence speed and longer alignment time of the moving base alignment. When the alignment time is short, the alignment cannot converge, resulting in low azimuth accuracy. To address this issue, we propose a polar moving base alignment method based on backtracking scheme. Notably, this work first derives a polar coarse alignment method with the inertial frame based on the transverse Earth model. On this basis, we design a polar coarse alignment method based on backtracking scheme and optimize the data storage scheme. Then, an inverse navigation algorithm based on the transverse inertial navigation mechanical arrangement scheme was derived, and a polar fine alignment method based on backtracking scheme was designed. Semi-physical simulation experiments showed that the alignment algorithm based on backtracking scheme can converge in a short time with high alignment accuracy.

Multiplex genome editing may induce genotoxicity and chromosomal rearrangements due to double-strand DNA breaks at multiple loci simultaneously induced by programmable nucleases, including CRISPR/Cas9. However, recently developed base-editing systems can directly substitute target sequences without double-strand breaks. Thus, the base-editing system is expected to be a safer method for multiplex genome-editing platforms for livestock. Target-AID is a base editing system composed of PmCDA1, a cytidine deaminase from sea lampreys, fused to Cas9 nickase. It can be used to substitute cytosine for thymine in 3-5 base editing windows, 18 bases upstream of the protospacer-adjacent motif site. In the current study, we demonstrated Target-AID-mediated base editing in porcine cells for the first time. We targeted multiple loci in the porcine genome using the Target-AID system and successfully induced target-specific base substitutions with up to 63.15% efficiency. This system can be used for the further production of various genome-engineered pigs.

We have previously clarified that the strongly electron-withdrawing CF3 group nicely affected the base-mediated proton migration reactions of CF3-containinig propargylic or allylic alcohols to afford the corresponding a,b-unsaturated or saturated ketones, respectively, which was applied this time to the Claisen rearrangement after O-allylation of the allylic alcohols, followed by isomerization to the corresponding allyl vinyl ethers, enabling the desired rearrangement in a tandem fashion, or in a stepwise manner where a palladium catalyst attained an excellent diastereoselectivity.

The article presents the Base Point Split (BPSplit) algorithm for generating a polygon skeleton based on sets of vector data describing lakes and rivers. A key feature of the BPSplit algorithm is that it is dependent on base points representing the source or mouth of a river or a stream. The input values of base points determine the shape of the resulting skeleton. Various skeletons can be generated with the use of different base points. Base points are applied to divide polygon boundaries into segments. Segmentation supports the selection of TIN edges inside polygons. The midpoints of selected TIN edges constitute a basis for generating a skeleton. The algorithm handles polygons with numerous holes, and it accounts for all holes. This article proposes a method for modifying a complex skeleton with numerous holes. In the discussed approach, skeleton edges that do not meet the preset criteria (e.g. that the skeleton is to be located between holes in the center of the polygon), are automatically removed. A simple algorithm for smoothing zigzag lines was proposed.

Vertical-channel organic dual-gate/base transistors would be highly interesting since vertical organic transistors are the fastest organic transistors demonstrated today. However, incorporating a dual gate/base structure into an ultra-short channel vertical architecture represents a substantial challenge. Here, we successfully realize a new device concept of vertical organic permeable dual-base transistors (OPDBTs), where either of both base electrodes can be used to change the on-currents and tune the threshold voltages. The optimized devices yield a high on-current density of 1.54 A cm^-2 and a large current gain of 9.2×10⁵, corresponding to a high transmission value of 99.998%. The detailed operation mechanisms are investigated by calibrated TCAD simulations with the Poole-Frenkel mobility model, Gaussian density of states and tunneling model. Finally, high-performance logic circuits, e.g. inverter, NAND/AND computation functions are demonstrated with one single OPDBT operating at supply voltages of < 2.0 V. We believe that OPDBTs offer a compact and technologically simple hardware platform with excellent application potential for vertical-channel organic transistors in complex logic circuits.

A waterbody detection technique is an essential part of digital elevation model (DEM) generation to delineate land-water boundaries and set flattened elevations. This paper describes the technical methodology for improving the initial tile-based waterbody data that are created during production of the ASTER GDEM, because without improvement such tile-based waterbody data are not suitable for incorporating into the new ASTER GDEM Version 3. Waterbodies are classified into three categories: sea, lake, and river. For sea-waterbodies, the effect of sea ice is removed to better delineate sea shorelines in high latitude areas, because sea ice prevents accurate delineation of sea shorelines. For lake-waterbodies, the major part of the processing is to set the unique elevation value for each lake using a mosaic image that covers the entire lake area. Rivers present a unique challenge, because their elevations gradually step down from upstream to downstream. Initially, visual inspection is required to separate rivers from lakes. A stepwise elevation assignment, with a step of one meter, is carried out by manual or automated methods, depending on the situation. The ASTER GWBD product consists of a global set of 1º latitude-by-1º longitude tiles containing water body attribute and elevation data files in geographic latitude and longitude coordinates and with one arc second posting. Each tile contains 3601-by-3601 data points. All improved waterbody elevation data are incorporated into the ASTER GDEM to reflect the improved results.

Although mountain areas account for approximately one fifth of the terrestrial surface, there has been less research focused on fire in these areas compared to lowlands. Mountain fires have distinct behavior due to dynamic winds interacting with the terrain, which can influence the fireline intensity and propagation. For the sake of fire safety of fire crews, it is essential to know how difficult to control the fire is in the mountain regions, with fireline intensity providing a useful indicator of risk and suppressibility. We studied one of the major disasters, wildfire, in Australia in such a highland by using the Great Pine Tier Fire, which occurred 15^th January in 2019, ending up burning approximately 511.86km². Weather and fire intensity at pseudo weather stations located at key points of fire progression were analyzed by wind vector maps and numerical weather model vertical sounding (NWMVS). Fire propagation was then simulated in Prototype 2, a fire simulator capable of detecting the potential for lateral fire channeling (LFC), and simulating fireline intensity using Australian vegetation sub-models. We found that the synoptic wind appeared to be modified by the interaction with the terrain in windward and the fire intensified the most in its leeward. In practice, the fire moved out of the valley axis and up its sidehill by following the wind which had been modified by local vertex of the curved valley axis before reaching this location.

Background: We studied Riveaux Road Fire, which was ignited by multiple lightning strikes in January 2019 and burnt more than 637.19 km² in southern Tasmania, Australia. Aims: We focused on fire weather, such as identification of dynamic wind and vegetation type, in a valley of the study area. Methods: We employed two methods: numerical weather model vertical sounding (NWMVS) and the use of a fire simulator, to quantify and examine the contribution of dynamic winds to fire behaviour. The NWMVSs allow rapid diagnosis of changes in wind, temperature, dew point temperature and cloud coverage. Prototype 2 is a fire simulator based on the specification of Australian Fire Danger Rating System (AFDRS). Key results: We found fires to be guided by terrain-forced channelling primarily and by downslope wind conditionally in the valleys. In addition, the fire intensity periodically changed with the magnitude of surface wind, in buttongrass moorland, in which the fire often smoulders, during the fire period according to the satellite image. Conclusions and Implications: Therefore, there should be caution for not only terrain and dynamic wind but also vegetation type during fire spread in rugged terrain.

Consumption of prebiotic fibers to modulate the human gut microbiome is a promising strategy to positively impact health. Nevertheless, given the compositional complexity of the microbiome and its inter-individual variances, generalized recommendations on the source or amount of fiber supplements remain vague. This problem is further compounded by availability of tractable in vitro and in vivo models to validate certain fibers. We employed a gnotobiotic mouse model containing an a priori characterized 14-member synthetic human gut microbiome (SM) for their ability to metabolize a suit of fibers in vitro; the SM contains 14 different strains belonging to five distinct phyla. Since soluble purified fibers have been a common subject of studies, we specifically investigated the effects of concentrated raw fibers (CRFs)—containing fibers from pea, oat, psyllium, wheat and apple—on the compositional and functional alterations in the SM. We demonstrate that, compared to a fiber-free diet, CRF supplementation increased the abundance of fiber-degraders namely Eubacterium rectale, Roseburia intestinalis and Bacteroides ovatus and decreased the abundance of the mucin-degrader Akkermansia muciniphila. These results were corroborated by a general increase of bacterial fiber-degrading α-glucosidase enzyme activity. Overall, our results highlight the ability of CRFs to enhance the microbial fiber-degrading capacity.

The world is in the grips of the COVID-19 pandemic. Public health measures that can reduce the risk of infection and death in addition to quarantines are desperately needed. This article reviews the roles of vitamin D in reducing risk of respiratory tract infections, knowledge about the epidemiology of influenza and COVID-19, and how vitamin D supplementation might be a useful measure to reduce risk. Through several mechanisms, vitamin D can reduce risk of infections. Those mechanisms include inducing cathelicidins and defensins that can lower viral replication rates and reducing concentrations of pro-inflammatory cytokines that produce the inflammation that injures the lining of the lungs, leading to pneumonia, as well as increase concentrations of anti-inflammatory cytokines. Several observational studies and clinical trials reported that vitamin D supplementation reduced risk of influenza, whereas others did not. Evidence supporting the role of vitamin D in reducing risk of COVID-19 includes that the outbreak occurred in winter, a time when 25-hydroxyvitamin D [25(OH)D] concentrations are lowest; that the number of cases in the Southern Hemisphere near the end of summer are low; that vitamin D deficiency has been found to contribute to acute respiratory distress syndrome, and that case-fatality rates increase with age and with chronic disease comorbidity, both of which are associated with lower 25(OH)D concentration. To reduce risk of infection, it is recommended that people at risk of influenza and/or COVID-19 consider taking 10,000 IU/d of vitamin D₃ for a few weeks to rapidly raise 25(OH)D concentrations, followed by 5000 IU/d. The goal should be to raise 25(OH)D concentrations above 40–60 ng/ml (100–150 nmol/l). For treatment of people who become infected with COVID-19, higher vitamin D₃ doses might be useful. Randomized controlled trials and large population studies should be conducted to evaluate these recommendations.

The ability to predict physical characteristics from DNA presents significant opportunities for forensic science. Giving scientists an ability to make predictions about the donor of genetic material at a crime scene can then give investigators new intelligence leads for cold cases where DNA evidence has not identified any person of interest. However, the interpretation of this new form of intelligence requires careful analysis. The responses to an online survey, conducted in 2018-19, were used to examine how actors in the criminal justice system assess and interpret different types of DNA evidence and intelligence. The groups of focus for the survey were investigators, legal practitioners and the general public (as potential jurors). Several statistically significant effects were identified based on occupation and whether an individual had prior exposure to new DNA technology. Monitoring how those involved in interpreting reports from different types of DNA evidence and intelligence interpret them helps to ensure that decisions are made based on a sound understanding of their capabilities and limitations and may inform broader training and awareness strategies.

Background: Nutrient supplements are widely used for type 2 diabetes (T2D) yet evidence-based guidance for clinicians is lacking. Methods: We searched the four electronic databases from November 2015–December 2021. The most recent, most comprehensive, high-ranked systematic reviews, meta-analyses and/or umbrella reviews of randomised controlled trials in adults with T2D were included. Data were extracted on study characteristics, aggregate outcome measures per group (glycemic control, measures of insulin sensitivity and secretion), adverse events, and GRADE assessments. Quality was assessed using AMSTAR-2. Results: Twelve meta-analyses and one umbrella review were included. There was very low certainty evidence that chromium, Vitamin C and omega-3 polyunsaturated fatty acids (-3 PUFAs) were superior to placebo for the primary outcome of HbA1c (MD -0.54%, -0.54% and ES -0.27 respectively). Probiotics were superior to placebo for HbA1c (WMD -0.43%). There was very low certainty evidence that Vitamin D was superior to placebo for lowering HbA1c in trials of <6 months (MD -0.17%). Magnesium, zinc, Vitamin C, probiotics and polyphenols were superior to placebo for FBG. Vitamin D was superior to placebo for insulin resistance. Data on safety was limited. Conclusions: Future research should identify who may benefit from nutrient supplementation, safety, and optimal regimens and formulations.

The present study investigates the role of a simple inerter in supplemental devices for possible implementation in the matured seismic base isolation technique. Firstly, the response of the base-isolated structure with an optimally tuned mass damper-inerter (TMDI) is investigated to see the tuning effects. The time required to tune the TMDI was found to be significantly longer than the duration of a strong-motion earthquake. There was still a reduction in the response of the isolated structure, which is primarily due to the added damping and stiffness (ADAS) of TMDI and not because of the tuning effects. Hence, it is proposed that the corresponding ADAS of the TMDI be directly added to the isolation device. Secondly, the response of the base-isolated structures with the fluid inerter damper (FID) is studied. It was observed that the inerter of the FID does not influence the displacement variance of an isolated structure under broadband earthquake excitation. It implies that the response of the isolated structure with FID is primarily controlled by its counterpart fluid damper (FD). The performance of optimal TMDI, ADAS, FID, and FD to mitigate the seismic response of the flexible multi-story base-isolated structure under real earthquake excitations is also investigated. In terms of suppressing the displacement and acceleration responses of the isolated structure, it has been found that TMDI and ADAS perform similarly. Comparing the response of the isolated structure with FID and FD demonstrated that the inerter in the FID has detrimental effects on the isolated structures, in which the top floor's acceleration and base shear are substantially increased.

Understanding tumor attachments and management of feeding arteries are very important factors to achieve safe resection of skull base meningioma. We examined the distributions and frequencies of feeding arteries in skull base meningioma by cerebral angiography, and also assessed relationships to tumor attachment for skull base meningioma. We enrolled patients with skull base meningioma who underwent MRI and cerebral digital subtraction angiography (DSA), from September 2015 to October 2022. Subjects comprised 115 patients (32 males, 83 females; mean age, 52.7 years) with 117 meningiomas showing tumor attachments around the “cavernous sinus to upper part of the clivus” (Area 1), “lower part of the clivus to foramen magnum” (Area 2), and “tentorium around the petrous bone” (Area 3). We examined feeding arteries based on cerebral angiography and counted the number of related feeding arteries. Particularly frequent arteries, such as the dorsal meningeal artery (DMA), ascending pharyngeal artery (APA), tentorial artery (TA), and petrosal branch (PB) of the middle meningeal artery (MMA) were analyzed for associations of tumor attachment to Areas 1–3. DMA, APA, TA, and PB are very frequent feeding arteries among skull base meningiomas. In some cases, the artery of the foramen rotundum, posterior ethmoidal artery, recurrent meningeal artery, posterior meningeal artery, etc., supply blood to the skull base meningioma. Meningiomas with DMA as a feeding artery correlated strongly with tumor attachment to Area 1 (p&lt;0.001). Meningiomas with APA correlated strongly with tumor attachment to Area 2 (p&lt;0.001). Meningiomas with TA correlated strongly with tumor attachment to Area 3 (p&lt;0.001). PB correlated with Area 3 (p&lt;0.05). Visualization of these arteries suggests tumor attachments to the correlated areas. An accurate anatomical understanding of tumor attachment and feeding arteries is essential to determine appropriate surgical strategies for skull base meningioma. Pre-operative DSA can provide further understanding of the feeding arteries and attachments of skull base meningioma.

The study was conducted in north wollo, south wollo and orimiya zone, in Eastern Amhara with an aim to assess the resource potential of Acacia seyal in the selected sites. The data from the selected sites were collected using point center quarter method. A total of 90 quadrates from nine study areas with plot size 50m*50m, (22.5ha) were systematically located along each transect, 100 m apart, and was spatially captured with the aid of GPS. At every sampling point, four quadrants (90 degrees) were created, using the transect line and a line perpendicular to it. Species composition Acacia seyal structure and its regeneration status, at points along transects were taken to analyze diversity and target species structure of the sites. The highest and least density of Acacia seyal ha^-1 were attained by Mehale mecharie (148) and Alene sefer (52). The highest shannon weiner diversity and species richness was observed in Alene sefer(Kemessie). Acacia seyal structure in all study sites showed an inverted J shape except lastie gerdao (Gubalafeto). Therefore, Acacia seyal deserves immediate conservation and appropriate management measures in order to get sustainable product and services from the species. Based on the results, awareness creation on the values and management of Acacia seyal, study on the management options of Acacia seyal for firewood, fuel wood, charcoal production and also investigation of gum production techniques of Acacia seyal for the sustainable use of the resource are recommended.

Mapping vegetation species is critical to facilitate related quantitative assessment, and for invasive plants mapping their distribution is important to enhance monitoring and controlling activities. Integrating high resolution multispectral remote sensing (RS) image and lidar (light detection and ranging) point clouds can provide robust features for vegetation mapping. However, using multiple source of high-resolution RS data for vegetation mapping at large spatial scale can be both computationally and sampling intensive. Here we designed a two-step classification workflow to decrease computational cost and sampling effort, and to increase classification accuracy by integrating multispectral and lidar data to derive spectral, textural, and structural features for mapping target vegetation species. We used this workflow to classify kudzu, an aggressive invasive vine, in the entire Knox County (1,362 km2) of Tennessee, the United States. Object-based image analysis was conducted in the workflow. The first-step classification used 320 kudzu samples and extensive coarsely labeled samples (based on national land cover) to generate an overprediction map of kudzu using random forest (RF). For the second step, 350 samples were randomly extracted from the overpredicted kudzu and labeled manually for the final prediction using RF and support vector machine (SVM). Computationally intensive features were only used for the second-step classification. SVM had constantly better accuracy than RF, and the Producer’s Accuracy, User’s Accuracy, and Kappa for the SVM model on kudzu was 0.94, 0.96, and 0.90, respectively. SVM predicted 1010 kudzu patches covering 1.29 km2 in Knox County. We found the sample size of kudzu used for algorithm training impacted the accuracy and number of kudzu predicted. The proposed workflow could also improve sampling efficiency and specificity. Our workflow had much higher accuracy than the traditional method conducted in this research, and could be easily implemented to map kudzu in other regions or other vegetation species.

The reuse of recycled crushed concrete aggregate (RCCA) and reclaimed asphalt pavement (RAP) can provide a sustainable solution for the disposal of C&amp;D materials instead of sending it to landfill. More importantly, it will save energy and reduce impact on the environment. Several states in USA are using RCCA and RAP as base materials for years, focusing on the quality of the recycled materials. The structure of Recycled Aggregate (RA) is more complex than Natural Aggregate (NA). RAs have old mortar adhered on them that forms a porous surface at interfacial transition Zone (ITZ) and prevents new cement mix from bonding strongly with the aggregates. The objective of this work was to correlate microstructural properties like micro-porosity, inter and intra aggregate pores with the unconfined compressive strength (UCS) of RAP and RCCA molds, mixed at different proportions. In this paper, the quantity of micro-pores and their effect on the strength of mixed materials is used as the basis of microstructural analysis of recycled concrete and reclaimed asphalt. Microstructural properties obtained from the analysis of scanning electron microscope (SEM) images were correlated with unconfined compressive strength. Intra-aggregate and inter-aggregate pores were studied for different ratios of cement treated mixture of RAP and RCCA. The results show that the number of pores in the mixture increases considerably by adding RAP, which eventually causes reduction in unconfined compressive strength. In addition, significant morphological and textural changes of recycled aggregates were observed by SEM image analysis.

Feline immunodeficiency virus (FIV) is a lentivirus in the family Retroviridae that infects domestic cats resulting in an immunodeficiency disease featuring a progressive and profound decline in multiple sets of peripheral lymphocytes. Despite compelling evidence of FIV-associated immunopathology, there are conflicting data concerning the clinical effects of FIV infection on host morbidity and mortality. To explore FIV-associated immunopathogenesis and clinical disease, we experimentally inoculated a cohort of 4 specific pathogen free kittens with a biological isolate of FIV clade C and continuously monitored these animals along with 2 uninfected control animals for more than 13 years, from the time of inoculation to the humane euthanasia endpoint. Here we report the results obtained during the late asymptomatic and terminal phases of FIV infection in this group of experimentally FIV-infected cats.

How Nature discovered genetic coding is a largely ignored question, yet the answer is key to explaining the transition from biochemical building blocks to life. Other, related puzzles also fall inside the aegis enclosing the codes themselves. The peptide bond is unstable with respect to hydrolysis. So, it requires some form of chemical free energy to drive it. Amino acid activation and acyl-transfer are also slow and call for catalysis. All living things must thus also convert free energy and synchronize cellular chemistry. Most importantly, functional proteins occupy only small, isolated regions of sequence space. Nature evolved heritable symbolic data processing to seek out and use those sequences. That system has three parts: a memory of how amino acids behave in solution and inside proteins, a set of code-keys to access that memory, and a scoring function. The code-keys themselves are the genes for cognate pairs of tRNA and aminoacyl-tRNA synthetases, AARS. I outline the surprising links between all these questions and the structural duality of the base-pairing that holds genes together and how those links arise from the experiments.

Abstract: Two novel low-dimensional molecular magnetic materials were prepared by a self-assembling of 3d- and 5d-metal complexes. These are the first neutral heterobimetallic cyanobridged compounds involving one anisotropic Mn(III) Schiff base complex and one octacyanotungstate(V) per molecular unit. A slow diffusion of the constituents’ solutions leads to a formation of the 0D crystalline complex 1 due to coordination of a water molecule to the Mn center prevents a polymer formation. A rapid mixing of reagents results in a precipitation of the microcrystalline powder of the complex 2, which on a totality of experimental data possess 1D polymeric structure. The magnetic studies have shown that antiferromagnetic exchange interactions are dominating in 1 J/k_B= -13.1(7) K, D=-3.0(1.3) K, zJ'= -0.16(20) K and g_av=2.00(1); while the presence of the significant intramolecular Mn(III)–W(V) ferromagnetic couplings through cyanide bridges is characteristic for 2 (J/k_B = 46.1(5) K g_Mn = 2.11(3), fixed g_W = 2.0). Due to the weak interchain interactions, zJ'/k_B = –0.8(2) K, compound 2 is a metamagnet with the Néel temperature of 9.5 K undergoing a spin-flip transition at 2 kOe. The slow magnetization dynamics of 2 was investigated at DС field of 0 and 2 kOe, giving the values of τ₀ 32(15) and 36(15) ps respectively, well within the range typical for SCMs. The respective ∆_τ/k_B values were 48.4(1.2) and 44.9(1.0) K.