Use of MS Excel as a platform for teaching simple iterative solution of partial differential equations runs into issues of reliability of the computation because of the large number of calculations required. This article documents the problem and an empirical solution. The cause of this unreliability was found by detailed examination of the numerical results from three simultaneous iterations. Computers of several types from different manufacturers were found to fail occasionally in updating variables in the numerical iteration. A simple work-around is suggested and was tested on several platforms.

The key links of face recognition are digital image preprocessing, facial feature extraction and pattern recognition, this article aimed at the current problem of slow speed and low recognition accuracy of face recognition , from the above three key links, on the basic of analyzing the therories of Fractional Differential Masks Operator (FDMO), Principal Component Analysis (PCA) and Support Vector Machine (SVM), design a kind of FDMO+PVA+SVM coupling algorithm that applies to face recognition to improve the speed and accuracy of it. To realize FDMO+PCA+SVM coupling algorithm, first, we should apply FDMO to face image processing binary marginalization, the purpose is getting face contour; Then, we apply PCA to get the feature of face image which is disposed by binary marainalization. At last, we can apply One-Against All of the SVM classifier and LibSVM software package to realize face recognition. Beside, the article with nine different coupling algorithm design four groups of experimental reaults on the ORL face database verified by comparative analysic FDMO+PCA+SVM coupling algorithm in the superiority of face recognition accuracy and speed.

The influence of growth temperature on the crystalline quality and optical properties of AlGaN at 325 nm, grown using plasma-assisted molecular beam epitaxy (MBE), was investigated. The growth temperature exhibited a significant impact on the growth mode and surface morphology. Specifically, at a growth temperature of 750 degrees Celsius, when appropriate Al and Ga flow rates were employed, the AlGaN layer exhibited exceptional surface morphology and favorable optical properties. The optical properties of the AlGaN material were explored, revealing the presence of two distinct non-radiative recombination centers characterized by different activation energies. The minority carrier lifetimes were measured as 560 ps at 10 K and 64 ps at room temperature. The underlying mechanism was analyzed from the perspective of carrier dynamics, shedding light on the observed phenomena.

The pharmacological effects of the fruiting body of Ophiocordyceps sinensis (Os) exerted antioxidant, anti-virus, and immunomodulatory, whereas the anti-inflammatory effects and active components of Os mycelial submerged culture (OMSC) are not known. This study aimed to investigate the active compounds in the fermented liquid (FLOS), hot water (WEOS), and 50-95% (EEOS-50, EEOS-95) ethanol extracts of OMSC and their anti-inflammatory effects and potential mechanisms in LPS-stimulated microglial BV2 cells. The results demonstrated that all of the OMSC extracts could inhibit NO production in BV2 cells. EEOS-95 exhibited the strongest inhibitory effects (41 % inhibitory ability at 500 µg/mL), and its ergosterol, GABA, total phenolic, and total flavonoid contents were significantly higher than those of the other extracts (18.60, 18.60, 2.28, and 2.14 mg/g, p < 0.05, respectively). EEOS-95 also has a strong inhibitory ability against IL-6, IL-1β and TNF-α with IC50 of 617, 277 and 507 µg/mL, respectively, which is higher than that of 1 mM melatonin. The anti-inflammatory mechanism of EEOS-95 seems to be associated with up-regulation of PPAR-γ/Nrf-2/HO-1 antioxidant-related expression and down-regulation of NF-κB/COX-2/iNOS pro-inflammatory expression signaling. Therefore, we hypothesized that EEOS-95 can prevent neurodegenerative diseases, but the effect on the application in vivo should be further investigated.

Hox gene clusters are crucial in Embryogenesis. It was observed that some Hox genes are located in order along the telomeric to centromeric direction of the DNA sequence: Hox1, Hox2, Hox3…. These genes are expressed in the same order in the ontogenetic units of the Drosophila embryo along the Anterior-Posterior axis. The two entities (genome and embryo) differ significantly in linear size and in-between distance. This strange phenomenon was named Spatial Collinearity (SP). Later, it was observed that, particularly in the Vertebrates, a Temporal Collinearity (TC) coexists: first is Hox1 expressed, later Hox2 and even later Hox3,…,. According to a Biophysical Model (BM), pulling forces act at the anterior end of the cluster while a cluster fastening applies at the posterior end. Hox clusters are irreversibly elongated along the force direction. During Evolution, the elongated Hox clusters are broken at variable lengths thus split clusters may be created. An Empirical Rule was formulated distinguishing development due to a complete Hox cluster from development due to split Hox clusters. BM can ‘explain’ this Empirical Rule. In a spontaneous mutation where the cluster fastening is dismantled, a weak pulling force automatically shifts the cluster inside the Hox activation domain. This cluster translocation can probably explain the absence of Temporal Collinearity in Drosophila.

In this paper, we first discuss the research status and application progress of the finite element method and the smoothed particle method. By analyzing the advantages of the smoothed particle method and the finite element method, a new coupling algorithm, namely FEM-SPH algorithm, is proposed. By the method of comparison, it shows that finite element method and SPH method in the simulation of large deformation problems each have advantages and disadvantages, the finite element method smoothed particle coupling algorithm is effective to achieve the performance of high computational efficiency and can naturally simulate large deformation problems across. In the process of calculation, the large deformation unit can be freely into an algorithm to facilitate the calculation accuracy and efficiency of three methods of numerical simulation. Through the study found, FEM-SPH algorithm not only overcome the defect of smooth particle tensile instability, but also overcomes the problem of low efficiency of finite element computation. To further test the FEM-SPH algorithm has advantages in the practical engineering, we have carried out the actual test to the example of the super high speed collision, concluded that, since the target of most of the computational domain is always finite element, smoothed particle focused only in contact with the projectile and target of local area, particle number is not much, the whole calculation process just ten minutes, computational efficiency has been greatly improved, at the same time in the simulation of large deformation, the advantage is very obvious .This provides a criterion for the actual project, depending on the specific material deformation mode and choose a more appropriate conversion algorithm.

The aim of this research work is to study the influence of temperature, solar irradiation and wind dust on the production of solar energy. In addition, it aims to study the assessment of water quality, in particular groundwater used for cooling and cleaning photovoltaic panels (quality analysis). it's an important source, stable and sustainable can be used entirely for cooling and cleaning PV modules from the sales dust, in order to improve their performance. To date, all research studies carried out in this context of cooling and cleaning using water have not taken account of the nature of this water. We have taken a sample of water from a well in a rural area in the Darra Tafilalet region of Morocco. This region has an arid and semi-arid climate, with very high temperatures and dust-laden winds, particularly in summer. These meteorological characteristics influence the efficiency of cells, particularly photovoltaic (PV) panels, reducing their performance. Next, the water sample was analysed in the laboratory. The results obtained show that the groundwater in this area is very sensitive to cooling and cleaning photovoltaic panels. Moreover, these results indicate that the temperature, solar irradiation and wind-blown dust have a significant influence on energy production.

Tellurium exhibits exceptional intrinsic electronic properties. However, investigations into the modulation of tellurium's electronic properties through physical modification are notably scarce. Here, we present a comprehensive study focused on the evolution of the electronic properties of tellurium crystal flakes under plasma irradiation treatment by employing conductive atomic force microscopy and Raman spectroscopy. The plasma-treated tellurium experienced a process of defect generation through lattice broken. Prior to the degradation of electronic transport performance due to plasma irradiation treatment, a remarkable observation emerged: in the low-energy region of hydrogen plasma-treated tellurium, a notable enhancement in conductivity was unexpectedly detected. The mechanism underlying this enhancement in electronic transport performance was thoroughly elucidated by comparing it with the electronic structure induced by argon plasma irradiation. This study not only fundamentally uncovers the effects of plasma irradiation on tellurium crystal flakes, but also unearths an unprecedented trend of enhanced electronic transport performance at low irradiation energies when utilizing hydrogen plasma. This abnormal trend bears significant implications for guiding the prospective application of tellurium-based 2D materials in the realm of electronic devices.

Cities have witnessed a booming interest in cycling in recent years. However, the implementation of cycling networks rarely followed a strategy to make them more accessible to specific social groups, such as women. To address this gap in knowledge, this paper provides a holistic perspective of women’s cycling mobility. Specifically, the study’s goal is to look into the social and environmental implications of cycling for women in Turin, Italy. Hence, this paper provides insights for ensuring a woman-friendly cycling system in a city and ensuring women’s participation as vital stakeholders in promoting a bike-friendly identity. We clarify women’s perceptions of cycling and outline the requirements for more inclusive bike infrastructures. Thus, we identify strategies to improve women’s access to bike lanes and investigate the environmental benefits of reduced air pollution by such a bike system. All this information is intended to define a more socially inclusive and environmental-friendly transport system in Turin for everyone, as depicted in Goal 11 of Sustainable Development Goals (SDGs).

As the time passes the modification in technology world lead to the evaluation in mobile application as well. With evaluation in mobile industry it is an open challenge for software quality researcher that how to enhance software quality to meet the needs of changes? Quality assurance play a key role in differentiating good application from bed application. With the continuous evaluation of mobile application developing process should be quick and efficient to comply with user requirements and satisfaction. While the listed requirement leads to bad design choices known as antipatterns, which in turn affect the reliability of the code. A tool based method PAPRIKA is used in the proposed re-search to identify and monitor these antipatterns together with a two-step assessment model for software quality assurance and object oriented software quality matrix.

Brain is the most complex organ in the human body and it is divided into two hemispheres - left and right hemispheres. Left hemisphere is responsible for control of right side of our body whereas right hemisphere is responsible for control of left side of our body. Brain image segmentation from different neuroimaging modalities is one of the important parts in clinical diagnostic tools. Neuroimaging based digital imagery generally contain noise, inhomogeneity, aliasing artifacts, and orientational deviations. Therefore, accurate segmentation of brain images is a very difficult task. However, the development of accurate segmentation of brain images is very important and crucial for a correct diagnosis of any brain related diseases. One of the fundamental segmentation tasks is to identify and segment inter-hemispheric fissure/mid-sagittal plane, which separate the two hemispheres of the brain. Moreover, the symmetric/asymmetric analyses of left and right hemispheres of brain structures are important for radiologists to analyze diseases such as Alzheimer's, Autism, Schizophrenia, Lesions and Epilepsy. Therefore, in this paper we have analyzed the existing computational techniques used to find brain symmetric/asymmetric analysis in various neuroimaging techniques (MRI/CT/PET/SPECT), which are utilized for detecting various brain related disorders.

This article analyzes some available bike mobile applications for smartphones as an alternative to bike computers (Cycle Computers or speedometer or speed sensors). We have records of a large number of MTB (Mountain Bike) datasets, 219 datasets were recorded on 4 different routes. These applications create maps and profiles from geographic data. Inputs can be in GPS data (tracks and waypoints), driving routes, street addresses, or simple coordinates. Most applications estimate fields such as speed, heading, slope, distance, VMG (velocity made good) and pace (cadence). However, it is necessary to calculate the relationship between cadence and power in pedaling so that cyclists know the appropriate moment to apply power to their legs to improve the torque. This paper shows tables, comparative graphs, and performance evaluation of biking routes in four different cycling mobile applications.

Ensuring the security of vertical applications in fifth-generation (5G) mobile communication systems and previous generations is crucial. These systems must prioritize maintaining the confidentiality, integrity, and availability of services and data. Examples of vertical applications include smart cities, smart transportation, public services, Industry 4.0, smart grids, smart health, and smart agriculture. Each vertical application has specific security requirements and faces unique threats within the mobile network environment. Thus, it is essential to implement comprehensive and robust security measures. This approach helps minimize the attack surface and effectively manage risks. This survey thoroughly examines mobile networks and their security challenges in vertical applications, shedding light on associated threats and potential solutions. Our study considers the interplay between security considerations in 5G, legacy networks, and vertical applications. We emphasize the challenges, opportunities, and promising directions for future research in this field and the importance of securing vertical applications in the evolving landscape of mobile technology.

This study aimed at assessing the extent to which the Saudi general population has embraced digital health medical applications to meet their health-related needs so that the Saudi Ministry of Health and government can appropriately be guided on scaling up of digital health across the country. As such, this study was guided by the question of to what extent do the Saudi people use digital health mobile-based applications?. This was a cross-sectional study utilizing snowballing sampling approach. Frequencies, Chi-square, and Spearman rank correlation statistics were used to offer descriptive and inferential analysis of the variables. The majority of the participants were economically able to afford smart devices that have medical apps, had at least an app on such devices, and highly regarded the benefits of the apps. Unfortunately, their understanding of how to use such apps was limited and this posed a barrier to embracing digital health alongside difficulty downloading apps, and medical ethical concerns. Although there is a willingness, extra effort is needed from the Saudi Ministry of Health and government to promote the uptake of digital health in Saudi Arabia.

We report the experiences of the bike sharing system in Ningbo, China. To analyze the impact of the system, system log data are collected for the whole month of May 2014 (with more than 1.7 million usage records), supplemented by questionnaire data from 1,856 respondents. Our results show that public bike usage follows the same pattern as road traffic, with morning and evening peaks on week days. In terms of mode substitution, 16% of public bike trips would have been made by private cars. In average, each public bike is used 3.7 times per day, with each trip lasting around 23 minutes and covering around 3.5 kilometre. This translates into a reduction of car travel by more than 11 million kilometre per year, a significant contribution to the sustainability of urban transport in Ningbo.

In this work we looked for a stable and accurate procedure to perform feature selection in datasets with a much higher number of predictors than individuals, as in Genome-Wide Association Studies. Due to the instability in feature selection when many potential predictors are measured, a variable selection procedure is proposed that combines several replications of shrinkage regression models. A weighted formulation is used to define the final predictors. The procedure is applied to investigate Single Nucleotide Polymorphisms (SNPs) predictors associated to Alzheimer’s disease in the Alzheimer’s disease Neuroimaging Initiative (ADNI) dataset. Two data scenarios are investigated: one considering only the set of SNPs and another with the covariates age, sex, educational level and APOE4 genotype. The SNP rs2075650 and the APOE4 genotype are given as risk factors for AD, which is in line with the literature, and other four new SNPs are pointed, opening new hypotheses for in vivo analyses. These experiments demonstrate the potential of the new method for stable feature selection.

This manuscript presents a study on the spatial relationships between bike accidents, the built environment, land use, and transportation network characteristics in Budapest, Hungary using Geographic Weighted Regression (GWR). The sample period included bike crash data between 2017 and 2022. The findings provide insights into the spatial distribution of bike crashes and their severity, which can be useful for designing targeted interventions to improve bike safety in Budapest and be useful for policymakers and city planners in developing effective strategies to reduce the severity of bike crashes in urban areas. The study reveals that the built environment features, such as traffic signals, road crossings, and bus stops, are positively correlated with the bike crashes index, particularly in the inner areas of the city. However, traffic signals have a negative correlation with the bike crash index in the suburbs, where they may contribute to making roads safer for cyclists. The study also shows that commercial activity and PT stops have a higher impact on bike crashes in the northern and western districts. The GWR analysis further suggests that one-way roads and higher speed limits are associated with more severe bike crashes, while green and recreational areas are generally safer for cyclists. Future research should be focused on the traffic volume and bikes trips’ effects on the severity index.

Mobile software applications (apps) have transformed how individuals oversee and maintain their own health. One way that girls can monitor their menstrual cycles is through the increasingly widespread use of mobile menstrual tracking apps. This study aims to examine menstrual symptom tracking for adolescents in English and Chinese apps, exploring menstrual literacy, cross-cultural differences, and framing, or presentation, of symptoms. The mixed methods content analysis involved 15 popular free menstrual tracking apps in English (n = 8) and Chinese (n = 7). Quantitative analysis of qualitative data was conducted through manual coding of content and automatically analyzing sentiment, or emotional tone, using a computational approach. We found that: (1) Menstrual literacy on symptom management or treatment was generally insufficient, (2) There were more available emotional than physical symptoms in English than Chinese apps, (3) Symptoms were framed more negatively than positively, somewhat more in Chinese than English apps. Findings emphasize the importance of improving information in digital menstrual trackers. Our findings further reflect cultural differences in emotional expression and negative attitudes toward menstruation. Since adolescence is a critical developmental stage that requires ample support, digital menstrual trackers can uniquely shape attitudes and experiences, ultimately, empowering teenagers to better manage their menstrual health.

End-of-life electric vehicle (EV) batteries can be reused to reduce their environmental impact and economic costs. However, the growth of a second-life market is limited by the lack of information on the characteristics and performance of these batteries. As the volume of end-of-life EVs may exceed the amount of batteries needed for stationary applications, investigating the possibility of repurposing them in mobile applications is also necessary. This article presents an experimental test that can be used to collect the data necessary to fill a battery passport. The proposed procedure can facilitate the decision making process regarding the suitability of a battery for reuse at the end of its first life. Once the battery passport has been completed, the performance and characteristics of the battery are compared with the requirements of several mobile applications. Mobile charging stations and forklift trucks were identified as relevant applications for the reuse of high capacity prismatic cells. Finally, a definition of a state of health (SoH) is proposed to track the suitability of the battery during use in the second life application considering not only energy but also power and efficiency of the battery. This SoH shows that even taking into account accelerated ageing data, a repurposed battery can have an extended life of 11 years at 25~°C. It has also been shown that energy fade is the most limiting performance for lifetime and that cell-to-cell variation should be tracked as it has been shown to have a significant impact on battery life.

This paper constituted an extension of two previous studies concerning the mathematical development of the grain boundary grooving in polycrystalline thins films in the cases of the evaporation/condensation and diffusion taken separately. The thermal grooving processes are deeply controlled by the various mass transfer mechanisms of evaporation–condensation, surface diffusion, lattice diffusion, and grain boundary diffusion. This study proposed a new original analytical solution to the mathematical problem governing the grain groove profile in the case of simultaneous effects of evaporation-condensation and diffusion in polycrystalline thin films submitted to thermal and mechanical stress, and fatigue effects; by resolving the corresponding fourth-order partial differential equation ∂y∂t=C∂2y∂x2-B∂4y∂x4 obtained from the approximation y'2≪1. The comparison of the new solution to that of diffusion alone proved an important effect of the coupling of evaporation and diffusion on the geometric characteristics of the groove profile. A second analytical solution based on the series development was also proposed. It was proved that change of the boundary conditions of the grain grooving profile largely affected the different geometric characteristics of the groove profile.

Although the dockless bike-sharing system, which can be regarded as a typical example of the resource-sharing system, has been increasingly popular for years with people especially in China, the imbalanced distribution of shared bikes gradually becomes a major problem for both bike-sharing companies and their customers. To solve the imbalance problem, we aim to investigate the long-term performance of a system under the influence of some key factors (with an emphasis on the unequal demand between different nodes), which can guide us to discover the causes of the problem and offer several valuable suggestions to the operators. According to the fundamental principle of a dockless bike-sharing system, we propose a model reduction method to reduce the complexity of the theoretical network models, which are developed based on the Markovian queueing theory with the consideration of higher-demand nodes and lower-demand nodes. The theoretical network models provide us with steady-state probabilities of having a certain number of bikes at one node, which are used as an important part of the optimization model for solving the imbalance problem by carrying out an operator-based relocation strategy. The objective of the optimization model is to maximize the total profit and determine the optimal relocation frequency. It is found that most of the shared bikes are possible to gather at one low-demand node eventually in the long run under the influence of the different arrival rates at different nodes, but the decrease of the number of bikes at the high-demand nodes is more sensitive to the unequal demands and may cause a great loss for operators, which should be payed attention to especially when solving the relocation problems.

Robotic path planning is a field of research which is gaining traction given the broad domains of interest to which path planning is an important systemic requirement; the aim being to optimise the efficacy of robotic movements in a defined operational environment. For example, robots have been employed in many domains including: cleaning robots (such as vacuum cleaners), automated paint spraying robots, window cleaning robots, forest monitoring robots, agricultural robots (often driven using satellite and geostationary positional satellite data). Additionally, mobile robotic systems have been utilised in disaster areas and locations hazardous to humans (such as war zones in mine clearance). The coverage path planning problem describes an approach which is designed to determine the path that traverses all points in a defined operational environment while avoiding static and dynamic (moving) obstacles. In this paper we present our proposed Smooth-STC model, the aim of the model being to identify an optimal path, avoid all obstacles, prevent (or at least minimise) backtracking, and maximise the coverage in any defined operational environment. The experimental results in a simulation show that, in uncertain environments, our proposed smooth STC method achieves an almost absolute coverage rate and demonstrates improvement when measured against alternative conventional algorithms.

The development of accurate dynamic battery pack models for electric vehicles (EVs) is critical for the ongoing electrification of the global automotive vehicle fleet, since these serve as a key element in the energy performance of an EV powertrain system. The Equivalent Circuit Model (ECM) technique at the cell level is commonly employed for this purpose, combining accuracy and efficiency in the representation of battery operation within the broader powertrain system. In this study, a second-order ECM model of a battery cell is being developed using Modelica, an equation-based modeling language. Parameter lookup tables at multiple levels of state of charge (SoC), extracted from Li-ion battery cells with 4 different commonly used cathode materials, have been utilized. This approach allows for a representation of the battery systems that are used in a wide range of commercial EV applications. To verify the model, an integrated EV model is developed and simulation results of the FTP75 driving cycle have been compared against an equivalent application in MATLAB Simulink. The findings demonstrate a close match between the results obtained from both software across different system points. Specifically, the maximum deviation of SoC is limited to 0.08% and the maximum value of relative voltage deviation is 1.4%. The verified model enables the exploration of multiple possible architecture configurations of EV powertrains with Modelica.

Over the past decades, overweight and obesity has become a global epidemic and the leading threat for death. To prevent the serious risk, an overweight or obese individual must apply a long-term weight-management strategy to control food intake and physical activities, which is however, not easy. Recently, with the advances of information technology, more and more people can use wearable devices and smartphones to obtain physical activity information, while they can also access various health-related information from Internet online social networks (OSNs). Nevertheless, there is a lack of an integrated approach that can combine these two methods in an efficient way. In this paper, we address this issue and propose a novel mobile-social framework for health recognition and recommendation, namely, H-Rec². The main ideas of H-Rec² include (1) to recognize the individual's health status using smartphone as a general platform, and (2) to recommend physical activity and food intake based on personal health information, life science principles, and health-related information obtained from OSNs. To demonstrate the potentials of the H-Rec² framework, we develop a prototype that consists of four important components: (1) an activity recognition module that senses physical activity using accelerometer, (2) a health status modeling module that applies a novel algorithm to generate personalized health status index, (3) a restaurant information collection module that collects relevant information from OSN, and (4) a restaurant recommendation module that provides personalized and context-aware recommendation. To evaluate the prototype, we conduct both objective and subjective experiments, which confirm the performance and effectiveness of the proposed system.

Public transportation scheduling aims to optimize the allocation of transportation resources, enhance transportation efficiency, and increase passenger satisfaction, which is crucial for building a sustainable urban transportation system. As a complement to public transportation, shared bikes provide users with a solution for the last mile of travel, compensating for the lack of flexibility in public transportation and helping to improve its utilization rate. Due to the characteristics of shared bikes, such as peak usage periods in the morning and evening and significant fluctuations in demand across different areas, the optimization of shared bike dispatch can better meet user needs, thereby reducing vehicle vacancy rates and increasing operating revenue. Addressing this issue, this paper designs a comprehensive decision-making approach for spatio-temporal demand prediction and bike dispatch optimization. For demand prediction, we designed a T-GCN based bike demand prediction model. In terms of dispatch optimization, we considered factors such as dispatch capacity, distance restrictions, and dispatch costs, and designed an optimization solution based on genetic algorithms. Finally, this paper validates the approach using shared bike operating data, shows that T-GCN can effectively predict short-term demand for shared bikes. Meanwhile, the optimization model based on genetic algorithms provides a complete dispatch solution verifying the model’s effectiveness. The shared bike dispatch approach proposed in this paper, which combines demand prediction with resource scheduling. This scheme can also be extended to other transportation scheduling problems with uncertain demand, such as store replenishment delivery and intercity inventory dispatch.

Mannosylerythritol lipids (MELs), one of the most promising biosurfactants (BS), are glycolipids produced by yeasts or fungi, with great environmental performance and a high compatibility with the human body. MELs besides working as typical surfactants, can form diverse structures when in the critical aggregation concentration (CAC), reducing the surface tension of water and other solutions, and being stable over a wide range of conditions. Among others, MELs present anti-microbial, antitumor, antioxidant and anti-inflammatory activity, skin and hair repair capacity, which opens possibilities for their use in applications from cosmetics and pharmaceutics to bio-remediation and agriculture. However, their market share is still low when compared to other glycolipids, due to their less developed production process and higher production cost. This re-view gathers information on the potential applications of MELs mentioned on the literature since 1993. Furthermore, it is also explored the current strategies being developed to enhance the market presence of MELs, in parallel with the ones developed for rhamnolipids and sophorolipids.

ACL instability poses a significant challenge in traumatology and orthopedic medicine, often requiring accurate diagnosis for appropriate treatment. While the pivot-shift test offers a crucial means of assessment, its reliance on subjective interpretation underscores the need for supplementary imaging studies. This study aims to address this limitation by developing a Bayesian classification algorithm tailored for integration into a mobile application. Using the built-in inertial sensors of smartphones, this new approach aims to dynamically evaluate rotational stability during knee examinations. Orthopedic specialists conducted knee evaluations on 52 subjects, with subsequent analysis revealing interesting insights. Intraobserver and interobserver analyses, as measured by ICC, demonstrated strong agreement both in terms of timing between maneuvers (ICC = 0.94) and signal amplitude (ICC = 0.71-0.66). Notably, the Bayesian algorithm successfully classified 95% of joint hypermobility cases, with an additional 7 cases of hyperlaxity identified by the Pivot-Shift Meter (PSM). These findings highlight the practicality and effectiveness of implementing a Bayesian classification algorithm within a mobile application for assessing and categorizing signals captured by smartphone inertial sensors during the pivot-shift test.

For multi-sensor integrated systems, such as a mobile mapping system (MMS), data fusion at sensor-level, i.e., the 2D-3D registration between optical camera and LiDAR, is a prerequisite for higher level fusion and further applications. This paper proposes a line-based registration method for panoramic images and LiDAR point cloud collected by a MMS. We first introduce the system configuration and specification, including the coordinate systems of the MMS, the 3D LiDAR scanners, and the two panoramic camera models. We then establish the line-based transformation model for panoramic camera. Finally, the proposed registration method is evaluated for two types of camera models by visual inspection and quantitative comparison. The results demonstrate that the line-based registration method can significantly improve the alignment of the panoramic image and LiDAR datasets under either the ideal spherical or the rigorous panoramic camera model, though the latter is more reliable.

There are several well-described molecular mechanisms that influence cell growth and are relat-ed to the development of cancer. Chemokines constitute a fundamental element which are not only involved in local growth but also affect angiogenesis, tumor spread and metastatic disease. Among them, the C-X-C motif chemokine ligand 12 (CXCL12) and its specific receptor the chemo-kine C-X-C motif receptor 4 (CXCR4) have been widely studied. The overexpression in cell mem-branes of CXCR4 has been shown to be associated with the development of different kinds of his-tological malignancies, such as adenocarcinomas, epidermoid carcinomas, mesenchymal tumors or neuroendocrine neoplasms (NENs). The molecular synapsis between CXCL12 and CXCR4 leads to the interaction of G proteins and activation of different intracellular signaling pathways in both gastroenteropancreatic (GEP) and bronchopulmonary (BP) NENs conferring greater ca-pacity for locoregional aggressiveness, epithelial-mesenchymal transition (EMT) and the ap-pearance of metastases. Therefore, it has been hypothesized how to design tools that target this receptor. The aim of this review is to focus on current knowledge of the relationship between CXCR4 and NENs, with a special emphasis on diagnostic and therapeutic molecular targets.

Many protein expression systems are primary utilised to produce a single, specific recombinant protein. In contrast, most biological processes such as virus assembly rely upon a complex of several interacting proteins rather than the activity of a sole protein. The high complexity of the baculovirus genome, coupled with a multiphase replication cycle incorporating distinct transcriptional steps, made it the ideal system to manipulate for high-level expression of a single or co-expression of multiple foreign proteins within a single cell. We have developed and utilised a series of recombinant baculovirus systems to unravel the sequential assembly process of a complex non-enveloped model virus, Bluetongue virus (BTV). The high protein yields expressed by the baculovirus system not only facilitated structure-function analysis of each viral proteins but were also advantageous to crystallography studies and supported the first atomic level resolution of a recombinant viral protein, the major BTV capsid protein. Further, the formation of recombinant double-shelled virus-like particles (VLPs) provided insights into the structure-function relationships among the four major structural proteins of the BTV whilst also representing a potential candidate for a viral vaccine. The baculovirus multi-gene expression system facilitated the study of structurally complex viruses (both non-enveloped and enveloped viruses) and heralded in a new generation of viral vaccines.

Three-dimensional (3D) printing technology, also known as additive manufacturing (AM), has emerged as an attractive state-of-the-art tool for precisely fabricating functional materials with complex geometries, championing several advancements in tissue engineering, regenerative medicine, and therapeutics. However, this technology has an untapped potential for biotechnological applications, such as sensor and biosensor development. By exploring these avenues, the scope of 3D printing technology can be expanded and pave the way for groundbreaking innovations in the biotechnology field. Indeed, new printing materials and printers would offer new possibilities for seamlessly incorporating biological functionalities within the growing 3D scaffolds. Herein, we review the extrusion-based 3D printing modalities emphasizing biosensor applications. We highlighted the application of natural, synthetic, and composite biomaterials as 3D-printed soft hydrogels. Emphasis was placed on the approach by which the sensing molecules were introduced during the fabrication process. Finally, the future perspective was provided.

Fires constitute a significant threat due to the pollutants emitted and the destruction they cause. People who take part in fire-fighting operations must be equipped with appropriate tools, including special clothing that will allow them to work and guarantee safety. One of the threats are compounds from the PAH group, which are characterized by high toxicity and carcinogenicity. Therefore, it is important that the materials used constitute a barrier to contamination. Various materials from which individual elements of special firefighter's clothing are made were tested. Additionally, the importance of height on the possibility of sorption of PAH compounds on a given type of material was analyzed. Based on the results obtained, it was found that the type of material and the zone in which the clothing items are used are important in the sorption processes of pollutants. Data in this area may be important for taking further actions regarding the modification of materials used in special fire brigade clothing and in their cleaning processes.

Poor medication adherence among older adults is a widespread problem worldwide. As the population ages, the design of smartphone medication management apps is critical to improving medication adherence among older adults. Taking the design of an elderly medication reminder APP as an example, this study proposes a sustainable design research method that integrates the KANO model, Analytic Hierarchy Process (AHP), Quality Function Deployment (QFD), and PUGH decision matrix. The method collects user demands through in-depth interviews, and applies the KANO model to classify these demands. The hierarchical structure of user needs is established by using AHP, and the priority is sorted according to the weight and importance determined by the judgment matrix. QFD is used to translate user needs into design requirements, and the house of quality matrix identifies key design requirements. Finally, design alternatives are evaluated using Pugh's concept selection method. The results of this study demonstrate that the integration of KANO-AHP-QFD-PUGH can be effective as a sustainable optimal design approach for the user experience of a medication reminder application for the elderly. This integrated method not only facilitates innovative optimization and sustainability of application design methods but also provides valuable theoretical and practical insights for future drug-assisted design for elderly users.

Based on DFT (density functional theory) using B3LYP/6-31G method, theoretical investigations applied to demonstrate the structural, electronic properties and stability of (N,Nˊ-(1,4-phenylene)bis(1,8-naphthalimide)) is more stable than the compound (N-(4-amino phenyl)1,8-naphthalimide) by (-1.2762 eV or -29.4299 Kcal.mol-1) depending on the values of HOMO, synthesis reaction of imide is spontaneous and endothermic at temperature 275˚C according to the values of ∆rS, ∆rG and ∆rH.

Performing optimisation and scale-up studies of crystallisation systems requires accurate and computationally efficient mathematical models. The assumption of the ideal mixing conditions in batch reactors typically produce inaccurate results while the computational expense of CFD models is still prohibitively high. Therefore, in this work, a new intermediary approach is proposed that takes into account the non-ideal mixing conditions in the reactor and requires less computational resources than full CFD simulations. Starting with the Danckwerts concept of the intensity of segregation, an analogy between its application to chemical reactions and the kinetics of the crystallisation phenomena (such as nucleation and growth) has been made. As a result, the modified kinetics expressions have been derived which incorporate the effect of non-idealities present in stirred reactors. This way, based on the experimental measurements of the mixing time using the Laser Induced Fluorescence (LIF) technique, computationally more efficient mathematical models can be developed in two ways: (1) the accurate semi-empirical correlations are available for standard mixing configurations with the most often used types of impellers, (2) CFD simulations can be utilised for estimation of the mixing time; in this case it is necessary to simulate only the mixing process. The benefits offered by the LIF experimental technique have been demonstrated and some frequent problems in its application analysed. The mixing time results for configurations with and without baffles for three types of impellers and four different rotational speeds have been presented. The false shorter mixing times in the non-baffled configurations have been observed and this phenomena explained by the existence of two segregated zones in the reactor and confirmed by additional experiments. The precise measurements in these cases have been shown as difficult using the LIF technique, particularly for higher rpms. The experimental data has been compared to the preliminary simulation results obtained from the Smoothed Particle Hydrodynamics method and the standard k-ε turbulence model with the modest success. The shortcomings of the SPH model have been recognized and the directions for the future work discussed.

Circulating tumor cells (CTCs) are cells released from the primary tumor and intravasate into the blood or lymphatic vessels, where they are transported to distant sites and act as seeds that initiate cancer metastases. Recent advances in CTC research have shown their relevance as prognostic markers for early and metastatic disease detection, predictive biomarkers for relapse, and response to medical intervention or therapy. The rapidly evolving landscape of CTC biology has opened new avenues for understanding cancer progression, metastasis, and treatment response. Additionally, translating these findings into clinical applications holds promise for improving cancer diagnostics, prognosis, and personalized therapeutic strategies. This review discusses the significance of CTCs in cancer research and their associated challenges. We explore recent developments in the detection and characterization of CTCs and their implications in cancer research and clinical practice.

Oilseed plants of the Brassicaceae plant family are cultivated for food, feed and industrial purposes on large-scale in Europe. This review gives an overview of current market-oriented applications of new genomic techniques (NGTs) in relevant Brassicaceae oilseed crops based on a literature survey. In this respect, changes in oil quality, yield, growth and resistance to biotic and abiotic stress are goals in oilseed rape (B. napus) and camelina (C. sativa). Environmental risk assessment scenarios are developed for specific NGT applications in Brassicaceae oilseed crops with either a changed oil composition or with fitness related traits. In case of a changed oil composition an increase or decrease of polyunsaturated fatty acids (PUFA) demonstrates risks for health and survival of pollinators. In case of fitness related traits other risks were identified, i. e. an increased risk of spread and persistence of NGT plants. Furthermore, there are indications for potential disturbance of interactions with the environment, involving signalling pathways and reaction to stress conditions. It is shown that for a comprehensive risk assessment the technological potential of NGTs, the plants’ biology and the scale of releases have to be considered in combination. Therefore, the release of NGT plants into the environment for agricultural purposes will require risk assessment and monitoring of single traits as well as of combinatorial and long-term cumulative effects. In addition, risk management should develop concepts and measures to control and potentially restrict the scale of releases. This is especially relevant for NGT Brassicaceae in Europe which is a centre of diversity of this plant family.

The Fruit Harvest Helper, a mobile application developed by Northwest Nazarene University’s (NNU) Robotics Vision Lab, aims to assist farmers in estimating fruit yield for apple orchards. Currently, farmers manually estimate the fruit yield for an orchard, which is a laborious task. Fruit Harvest Helper seeks to simplify their process. While prior research efforts at NNU concentrated on developing an iOS app for blossom detection, this current research aims to adapt that smart farming application for apple detection across multiple platforms, iOS and Android. The old and new applications were designed with an intuitive user interface that is easy for farmers to use, allowing for quick image selection and processing. Unlike before, the adapted app utilizes a color ratio-based image segmentation algorithm implemented in OpenCV C++ to detect apples in apple tree images selected for processing. The results of testing the algorithm with a dataset of images indicate an 8.52% Mean Absolute Percentage Error (MAPE) and a Pearson correlation coefficient of 0.6 between detected and actual apples on the trees. These findings were obtained by evaluating the images from both the east and west sides of the trees, which was the best method to reduce the error of this algorithm. Although the Fruit Harvest Helper shows promise, there are many opportunities for improvement. These opportunities include exploring alternative machine-learning approaches for apple detection, conducting real-world testing without any human assistance, and expanding the app to detect various types of fruit. The Fruit Harvest Helper mobile application is among the many mobile applications contributing to precision agriculture, nearing readiness for farmers to use in yield monitoring and farm management.

A detailed review of the scientific literature was undertaken to examine the most recent developments in plasma processing in the field of medicine. The first part of the review includes a detailed breakdown of the different types of coatings that can be applied onto medical devices using plasma, with a specific focus on antimicrobial surfaces. The developments during 2023 in plasma deposited biocompatible, drug delivery and adhesive coatings are described and specific applications in additive manufacturing are highlighted. The use of plasma and plasma activated liquids as standalone therapeutics continues to evolve and pertinent advances in this field are described. In addition, the combination of plasma medicine with conventional pharmaceutical interventions was reviewed and key emerging trends were highlighted, including the use of plasma to enhance drug delivery directly into tissue. The potential synergies between plasma medicine and chemotherapeutics for oncology and infection treatment is a growing area and recent advancements are noted. Finally, the use of plasma to control excess antibiotics and to intentionally degrade such materials in waste streams is described.

Graphene hybrid-filler polymer composites have emerged as prominent materials that revolutionize heavy industries. This study encapsulates the in-depth analysis of different influential factors such as filler/graphene type, aspect ratios, dispersion methods, filler-matrix compatibility, fiber orientation, synergistic effects, different processing techniques, and post-curing conditions that affect the processing, properties and determine the resultant applications of graphene hybrid polymer composites. Additionally, it discusses the substantial role of graphene collaboration with other fillers such as carbon nanotubes, silica, nano-clays and metal oxides to produce functionalized hybrid polymer composites with synergistically enhanced tailored properties to offer solutions for heavy industries like aerospace, automotive, electronics, and energy harvesting. The review concludes with some suggestions and outlook on the future of these composite materials by emphasizing the need for continued research to fully optimize their potential.

Splines and quasi-interpolation operators are important both in approximation theory and applications. In this paper, we construct a family of quasi-interpolation operators for the bivariate quintic spline spaces S₅³ (∆_mn⁽²⁾). Moreover, the properties of the proposed quasi-interpolation operators are studied, as well as its applications for solving two-dimensional Burgers’ equation and image reconstruction. Some numerical examples show that these methods, which are easy to implement, provide accurate results.

Polyhydroxyalcanoates (PHAs) are biodegradable polymers synthesized in cytoplasmic granules in bacteria, such as Cupriavidus necator (Ralstonia eutropha), Alcaligenes latus, Pseudomonas spp., Comamonas spp. and other species. PHAs accumulation occurs in response to stress conditions, i.e. under high carbon and low nitrogen (24:1 ratio). PHA can be synthesized using recombinant microorganisms (provided with the operon phbA/phbB/phbC), escaping the constrains of nutrient request, except addition of high amount of sugar (glucose, lactose, fructose). In this study; E. coli was genetically modified for PHB production in biofermentors. The production of PHA at industrial scale requires a continuous supplementation of fermentable sugars to support the availability of nutrients and to assess the level of the exponential growth phase; since sugars are required either for bacterial growth either for PHA synthesis and energy storage. The biofermentors need to be run in automated system. Sensors are used at many points in fermentators; in the evaluation of parameters: consumption of sugars; cell density; quantification of PHB synthesis. The need of operational control during the fermentation has prompted us to application of three measurements; one unit linked to a Nanodrop to evaluate OD; one linked to a reaction chamber to measure sugars consumed by enzyme based fluorescence detection; and one for bacteria Nile Blue staining and fluorescence intensity reads. The growth of bacteria on three different plant by-products was monitored and PHB production in four days using a banana by-product feed was optimised. These detectors will make possible to exploit the full potential of bioreactors optimizing the time of use and maximizing the number of bacteria synthesizing PHA.

Merkel cell carcinoma (MCC) is a rare, highly aggressive skin cancer characterized by two etiologies: the first one, observed in most cases, is attributed to Merkel cell polyomavirus (MCPyV), a DNA tumor virus, while the second one is due to ultraviolet (UV) radiation exposure. Currently, there are limited diagnostic, prognostic, and therapeutic biomarkers available for MCC. MicroRNAs (miRNAs) are small RNA molecules that do not code for proteins but regulate various cellular processes, including cell cycle progression, proliferation, differentiation, and apoptosis. The dysregulation of miRNAs has been associated with a wide range of cancers since they can act as either tumor suppressors or oncogenes. This paper aims to collect, summarize and re-organize the recent discoveries concerning miRNAs, whose dysregulation in the pathogenesis and progression of MCC is slowly emerging. Furthermore, the potential clinical applications of miRNAs as diagnostic biomarkers, possible differentiation between MCPyV-related and unrelated MCC, predictors of response to therapy and prognostics are also discussed. From this review, it emerges that miRNAs may have, in the near future, the potential to become clinically significant in improving the diagnostic accuracy, prognostic evaluation, and therapeutic options of MCCs. Finally, the new perspectives on the poorly explored field of artificial intelligence in MCC are provided.

Nowadays, the growing concern about improving thermal comfort in textiles, asphalt pavements and buildings has stimulated research into phase change materials (PCMs). However, the incorporation of PCMs directly causes mechanical impacts. Therefore, this study herein reported focuses on designing coaxial phase change fibres using commercial cellulose acetate (CA) or recycled CA obtained from cotton fabrics (CAt) as a coating and polyethylene glycol (PEG) 2000 as a core. The phase change fibres (PCF) were produced by wet spinning, varying the parameters: (i) CA concentration, molecular weight and source (virgin versus recycled); and (ii) PEG concentration and ejection. For phase change recycled fibres (PCFt), PEG concentration and ejection were varied. The fibres were assessed for their optical, chemical, thermal and mechanical properties. Bright-field microscopy images and Scanning Electron Microscopy (SEM) micrographs proved the coaxial structure. Fourier Transform Infrared spectroscopy (FTIR) confirmed the presence of PEG in the core. Thermogravimetric Analysis (TGA) proved the ability of PCFs to tolerate high temperatures. Differential Scanning Calorimetry (DSC) attested to the presence of PEG2000 peaks, since their melting points were close to those of virgin PEG2000, with a slight change in the PCFs and PCFts caused by the protective sheath of CA and CAt.

The pervasive presence of atmospheric pollution, particularly polycyclic aromatic hydrocarbons such as 7,12-dimethylbenz(a)anthracene, instigates aberrant cellular and tissue conditions, precipitating oxidative damage and inflammatory cascades conducive to the onset of cancer, notably mammary cancer. Given the hepatic metabolism of 7,12-dimethylbenz(a)anthracene, the imperative of employing natural antioxidants becomes apparent. In this study, we delve into the antioxidant and hepato-protective properties of Pistacia lentiscus against 7,12-dimethylbenz(a)anthracene-induced toxicity, alongside exploring its potential anticancer attributes. Our investigations unveil Pistacia lentiscus's anti-proliferative efficacy against human breast cancer cell lines. Notably, 7,12-dimethylbenz(a)anthracene-intoxication escalates body weight, disrupts lipid profiles, and incites serum oxidative damage. Concurrently, hepatic and renal oxidative stress ensue, accompanied by heightened antioxidant enzyme activity in the 7,12-dimethylbenz(a)anthracene-exposed-group compared to controls (p<0.05). Nonetheless, Pistacia lentiscus co-administration rectifies biochemical imbalances, significantly attenuates oxidative stress aberrations, and augments antioxidant enzyme responses (p<0.05). Importantly, histological analysis evinces Pistacia lentiscus's shielding effect against 7,12-dimethylbenz(a)anthracene induced hepatocyte injury and steatosis. Our findings underscore Pistacia lentiscus's robust anti-proliferative, antioxidant, and hepato-protective capacities, mitigating metabolic disturbances, oxidative stress propagation in liver and kidney functions, and potential histological alterations, thereby impeding 7,12-dimethylbenz(a)anthracene-induced mammary cancer initiation. We posit that Pistacia lentiscus may serve as a prophylactic agent against breast cancer instigated by this carcinogen.

Cell-culture meat is a novel concept to replace traditional meat produced from animals, and to satisfy rising food demands due to the world population growth. It is still a young field and requires to solve technical issues including cell sources and types, efficient culture for large scale production, taste and texture for customer satisfaction. The current review summarized traditional beef meat production and evaluation methods for customer satisfaction. In particular, serum biomarkers for beef meat evaluation are discussed, which can be applicated for cell-culture meat production.

This article presents a combined route and path planning strategy to guide Skid-Steer Mobile Robots (SSMRs) in scheduled harvest tasks within expansive crop rows with complex terrain conditions. The proposed strategy integrates: i) a global planning algorithm based on the Traveling Salesman Problem under the Capacitated Vehicle Routing approach and Optimization Routing (OR-tools from Google) to prioritize harvesting positions by minimum path length, unexplored harvest points, and vehicle payload capacity, and ii) a local planning strategy using Informed Rapidly-exploring Random Tree (IRRT*) to coordinate scheduled harvesting points while avoiding low-traction terrain obstacles. The global approach generates an ordered queue of harvesting locations, maximizing the crop yield in a workspace map. In the second stage, the IRRT* planner avoids potential obstacles, including farm layout and slippery terrain. The path planning scheme incorporates a traversability model and a motion model of SSMRs to meet kinematic constraints. Experimental results in a generic fruit orchard demonstrated the effectiveness of the proposed strategy. In particular, the IRRT* algorithm outperformed RRT and RRT* with 96.1% and 97.6% smoother paths, respectively. The IRRT* also showed improved navigation efficiency, avoiding obstacles and slippage zones, making it suitable for precision agriculture.

Halide perovskite materials gain enormous attention for their semiconducting properties, higher power conversion efficiency and potential applications in a wide range field of studies along with their two key limitations: stability and toxicity. In spite of great progress made on the halide perovskites and many promising research developments, overcoming these limitations is not realized yet. Therefore, coordination engineering of new framework for obtaining alternative new halide perovskite materials and fundamental understanding of the coordination chemistry and electronic interactions forming the structure of these newly engineered halide perovskite materials might be one way in order to overcome the issues related to both stability and toxicity. In this review, the current development of halide perovskite families, both lead halide perovskites and lead free halide perovskites followed by coordination engineering of the new frameworks to engineer new halide perovskite materials will be reviewed comprehensively. Moreover, all the concerns of the fundamental ideas of coordination chemistry and electronic interactions that are keys in forming the halide perovskite structures are discussed in detail and form the main aim of this review. Interestingly, we also discuss recent potential energy applications beyond photovoltaic and this review has completed with an essential and open question: ‘what could happen in the future of halide perovskites?’ in order to excite commercial enterprises and research institutions again as well as to get motivating new predictions on the future continuity of this field.

Federated learning (FL) has emerged as a crucial technology in today’s data-centric technological environment, enabling decentralized machine learning and safeguarding user privacy. This study introduces “Federated Operations (FedOps) Mobile,” a novel FL framework optimized for the dynamic and heterogeneous ecosystem of mobile devices. FedOps Mobile enhances traditional FL approaches for mobile devices by integrating real-time operational control and advanced on-device training capabilities using TensorFlow Lite and CoreML, addressing critical challenges in scalability, efficiency, and system heterogeneity. Our approach utilizes a wide range of devices, facilitated by intelligent client-selection mechanisms. This mechanism evaluates the capabilities and readiness of multiple devices per client to ensure fair and efficient network participation. The framework also utilizes remote device control for seamless task management and sustained engagement, enabling continuous learning without compromising the user experience. We conducted extensive experiments to validate the framework’s performance, focusing on three core aspects: operational efficiency, model personalization, and resource optimization in multi-device environments. The results demonstrate that the proposed method is effective for efficient client selection, energy consumption, and model optimization.

In polymer-based dental composites, wear is a three-body wear system mainly abrasive, because of the food particles and wear products suspended in the oral cavity, which are transferred to the microcavities of the surface of the replacements. Due to this fact, the incorporation of nanodiamond as reinforcement in these polymer matrix composites, which promotes the creation of a solid lubricant tribofilm surface could be advantageous. When nanodiamond is added in contents of 0.8, 1.6 and 3.2 wt %, an increase in microhardness from 95 up to 420 %, compared to the one of neat BisGMA/TEGDMA, is observed. Additionally, the incorporation of a content of 1.6 wt % is enough to cause a diminution of ~78 % in the friction coefficient and a reduction of the specific wear rate and Archard’s coefficient of ~50 %. Nevertheless, the addition of relatively high contents reduces the effectiveness of photoinitiation and UV-curing, which is related to the scattering and absorption of UV radiation by ND.

Presently, smartphones support a large range of applications, many of which require high computing power. This presents a problem because smartphones offer limited computing power, storage, and energy. Fortunately, Cloud computing (CC) is rapidly becoming known as the state of the art technology in the computer world. CC allows users to use unlimited dynamic resources when necessary. Mobile Cloud Computing (MCC) is integration into a mobile environment of the concept of cloud computing which eliminates barriers to the performance of mobile devices. The demand for mobile cloud applications and mobile user services is strong. This gives MCC a great opportunity to do business and research. However, security problems are a major obstacle to the adaptability of mobile cloud computing. This study presents the definitions of Cloud Computing, Mobile Computing (MC) and Mobile Cloud Computing including the architecture and applications of MCC. Furthermore, it discusses the challenges and opportunities faced in MCC.

Short-range Internet of Things (IoT) sensor nodes operating at 2.4 GHz need to provide ubiquitous wireless sensor networks (WSNs) with energy-efficient, wide-range output power (POUT) and fully integrated on a single chip for wireless body area networks (WBANs) and wireless personal area networks (WPANs) using low-power Bluetooth (BLE) and Zigbee standards. The proposed fully integrated transmitter (TX) utilizes a digitally controllable current-mode class-D (CMCD) power amplifier (PA) with a second harmonic distortion (HD2) suppression to reduce VCO pulling in an integrated system while meeting harmonic limit regulations. The CMCD PA is divided into 7-bit slices that can be reconfigured between differential and single-ended topologies. Duty cycle distortion compensation is performed for HD2 suppression, and an HD2 rejection filter and a modified C-L-C low-pass filter (LPF) reduce HD2 further. Implemented in a 28 nm CMOS process, the TX achieves a wide POUT range of from 12.1 to -31 dBm and provides a maximum efficiency of 39.8% while consuming 41.1 mW at 12.1 dBm POUT. The calibrated HD2 level is -82.2 dBc at 9.93 dBm POUT, resulting in a transmitter figure of merit (TX_FoM) of -97.52 dB. Higher order harmonic levels remain below -41.2 dBm even at 12.1 dBm POUT, meeting regulatory requirements.

Motivated by a common Mathematical Finance topic, this paper surveys several results concerning windings of 2-dimensional processes, including planar Brownian motion, complex-valued Ornstein-Uhlenbeck processes and planar stable processes. In particular, we present Spitzer's asymptotic Theorem for each case. We also relate this study to the pricing of Asian options.

In this study, we present comprehensive climatologies of effective ultraviolet (UV) quantities and photosynthetically active radiation (PAR) over Cyprus for the period 2004 to 2023, leveraging the synergy of earth observation (EO) data and radiative transfer model simulations. The EO dataset, encompassing satellite and re-analysis data for aerosols, total ozone column, and water vapor, alongside cloud modification factors, to capture the nuanced dynamics of Cyprus's atmospheric conditions. With a temporal resolution of 15 minutes and a spatial of 0.05°x0.05°, these climatologies undergo rigorous validation against established satellite datasets and are further evaluated through comparisons with ground-based global horizontal irradiance measurements provided by the Meteorological Office of Cyprus. This dual-method validation approach not only underscores the models' accuracy but also highlights their proficiency in capturing intra-daily cloud coverage variations. Our analysis extends to investigating the long-term trends of these solar radiation quantities, examining their interplay with changes in cloud attenuation, aerosol optical depth (AOD), and total ozone column (TOC). Significant decreasing trends in the noon ultraviolet index (UVI), of -2 to -4% per decade have been found in Autumn, especially marked on the island’s Northeastern part, mainly originating from the (significant) positive trends in TOC. The significant decreasing trends in TOC, of -2 to -3% per decade that were found in Spring do not result in correspondingly significant positive trends in the noon UVI since variations in cloudiness and aerosols also have a strong impact on the UVI in this season. The seasonal trends in the Daylight Integral (DLI) were generally not significant. These insights provide a valuable foundation for further studies aimed at developing public health strategies and enhancing agricultural productivity, highlighting the critical importance of accurate and high-resolution climatological data.

Recent research emphasises the importance of Artificial Intelligence applications as supporting tools for students in higher education. Simultaneously, an intensive exchange of views has started in the public debate in the international educational community. However, for a more proper use of these applications, it is necessary to investigate the factors that explain their intention and actual use in the future. With the Unified Theory of Acceptance and Use of Technology (UTAUT2) model, this work analyses the factors influencing students' use and intention to use artificial intelligence technology. For this purpose, a sample of 199 Greek students at the School of Humanities and Social Sciences from the University of Patras participated in a survey. The findings highlight that expected performance, habit, and enjoyment of these Artificial Intelligence applications are key determinants influencing teachers' intentions to use them. Moreover, behavioural intention, habit, and facilitating conditions explain the usage of these Artificial Intelligence applications. The study did not reveal any moderating effects. The limitations, practical implications, and proposed directions for future research based on these results are discussed.

Biochar is a carbonaceous material derived from the thermochemical conversion of biomass under oxygen-lean conditions. Its properties render it many applications in agriculture, environmental remediation, and catalysis. Commonly produced by pyrolysis under a nitrogen atmosphere, the biochar composition is influenced mainly by residence time, heating rate, and process temperature. The existing literature primarily assesses biochar properties, such as ultimate, proximate, calorific, porosity, and combustibility, generated under various thermo-conversion conditions. However, there is a notable lack of sufficient investigation and attention given to the practical application of biochar. This article seeks to bridge that gap by enhancing the comprehension of the necessary experimental assessment for specific biochar applications and proposing process optimization methods using Multi-Criteria Decision Analysis (MCDA). By delving into these aspects, the study offers a concise overview of biochar production and presents a comprehensive panorama based on articles and patents. Additionally, the research explores the physicochemical characterization techniques associated with biochar and its various applications in conjunction with MCDA. This comprehensive approach aims to uncover valuable insights that could further advance the practical and sustainable utilization of biochar in a wide range of fields.

Cashless payments are so common and popular that people are gradually not taking cash out of the house. But people still need to carry some cash and a couple of debit cards, which increases the risk of people having their cash or cards lost or stolen. The mobile payment method based on scanning codes solves the problem that you don't need to carry cash or cards when you go out, but you still need to enter the APP to scan the code to complete the payment. This report proposes a POS system with NFC technology, enabling people to complete transactions with new payment methods and reducing carrying other payment tools. Therefore, this paper explores the understanding of the proposed system and improves its functionality. The project aims to facilitate quickness for users to complete transactions, that is, near-field communication, using POS systems with received signals for transactions. Data is collected via triangulated research methods from various respondents across Malaysia with statistics and analysis on the proposed solution. The contactless NFC POS solution allows users to interact with the system via smartphone host card emulation application technology to complete transactions and allow people to reduce carrying other payment tools.

This study investigates the long-term stability of the Suomi National Polar-orbiting Partnership (S-NPP) Visible Infrared Imaging Radiometer Suite (VIIRS) moderate-resolution Thermal Emissive Bands (M TEBs; M12 – M16) covering a period from February 2012 to August 2020. It also assesses inter-sensor consistency of the VIIRS M TEBs among three satellites-S-NPP, NOAA-20, and NOAA-21 over eight months spanning from March 18 to November 30, 2023. The field of interesting is limited to the ocean surface between 60°S and 60°N, specifically under clear-sky conditions. Taking radiative transfer modeling (RTM) as the transfer reference, we employed the Community Radiative Transfer Model (CRTM) to simulate VIIRS TEB brightness temperature (BTs), incorporating European Centre for Medium-range Weather Forecasts (ECMWF) reanalysis data as inputs. Our results reveal two key findings. Firstly, the reprocessed S-NPP VIIRS TEBs exhibit a robust long-term stability, as demonstrated through analyses of the observation minus background BT differences (O-B ∆BTs) between VIIRS measurements (O) and CRTM simulations (B). The drifts of the O-B BT differences are consistently less than 0.105 K/Decade across all S-NPP VIIRS M TEB bands. Notably, observations from VIIRS M14 and M16 stand out with drifts well within 0.04 K/Decade, reinforcing their exceptional reliability for climate change studies. Secondly, excellent inter-sensor consistency among these three VIIRS instruments is confirmed through the double-difference analysis method (O-O). This method relies on the O-B BT differences obtained from daily data. The mean inter-VIIRS O-O BT differences remain within 0.08 K for all M TEBs, except for M13. Even in the case of M13, the O-O BT differences between NOAA-21 and NOAA-20/S-NPP have values of 0.312 K and 0.234 K, respectively, which are comparable to the 0.2 K difference between some TEBs among VIIRS and MODIS. These disparities are primarily attributed to the significant differences in the Spectral Response Function (SRF) of NOAA-21 compared to NOAA-20 and S-NPP. Our study confirms the RTM-based TEB quality evaluation method’s versatility and effectiveness in assessing long-term sensor stability and inter-sensor consistency. The double-difference approach effectively mitigates uncertainties and biases inherent to CRTM simulations, establishing itself a robust mechanism for assessing inter-sensor consistency. In addition, we’ve observed that, except for M13, M12 always exhibits larger spatial variations of O-O BT differences with greater uncertainties compared to the other M TEBs. The influence of solar contribution through sea surface reflection on the Top of Atmosphere (TOA) radiance measurements during daytime in M12 should not be underestimated.

Due to the rapid development of unmanned aerial vehicles (UAVs) communication technology, UAVs are gradually competing with primary users (PUs) for spectrum resources. Cognitive radio (CR) is a promising solution to meet the needs. Cooperative spectrum sensing (CSS) is considered as an effective method to detect the PU signal and identify available spectrum resources for UAVs in a cognitive UAV network (CUAVN). However, the cooperative mode among multiple UAVs may incur a high overhead, resulting in performance degradation. Therefore, we introduce a differential sequential 1 (DS1), which incorporates a differential mechanism and leverages the sequential idea based on the classical voting rule to enhance cooperative performance and efficiency. In view of this, we formulate three scenarios to characterize the PU activity and introduce a multi-slot cooperative mode within a single UAV to realize cooperative gain. Further, only the information change about the PU status is sequentially calculated in DS1, and combined with a sequential idea, the efficiency of the voting rule is greatly improved. Moreover, the application of support vector machines (SVM) in dynamic selection enables the selection of the most suitable voting rule based on diverse sensing parameters. This dynamic selection process ensures optimal performance and efficiency by adapting the voting rule to the specific characteristics of the given scenario. Finally, simulation results demonstrate that the superiority of our proposal with respect to the detection performance, sample size and the energy efficiency is evident, which proves the high performance of the proposed policy.

The fitting and modeling of skewed, complex, symmetric, and asymmetric datasets is an exciting research topic in many fields of applied sciences, notably lifetime, medical, and financial sciences. The Heavy tailed Nadarajah Haghighi model is introduced by compounding the heavy tailed family and Nadarajah Haghighi distribution in this paper. The so obtained model has three parameters accounting for the scale and shape of the distribution. The proposed distribution's fundamental characteristics such as probability density, cumulative distribution, hazard rate, and survival functions are provided, and several key statistical properties are established, and several entropy information measures are proposed. The estimation of model parameter is performed via the ML procedure. Further, different simulation experiments are conducted to demonstrate the performance of proposed estimator’s using some measure, like the average estimate, the average bias, and associated mean square error. Finally, we are applied our proposed model to analyze three different real datasets. In our illustration, we are compared the practicality of the recommended model with several well-known competing models.

We investigate and discuss in detail the structure of the restricted singular value decomposition for a tensor triplet under t-product (T-RSVD). The algorithm is provided with a numerical example illustrating the main result. For applications, we consider color image watermarking processing with T-RSVD.

The objective of this study was to detail the monomer composition of resin-based dental materials sold in the market in 2023 and to evaluate the proportion of BPA derivatives in relation with their applications. A search on manufacturers’ websites was performed to reference resin-based dental materials currently on the market. Their monomer composition was determined from material safety data sheets and completed with a search on PubMed database. Among the 543 material compositions exploitable, 382 (70.3%) contained BPA derivatives. Among them, 56.2% contained BisGMA, 28% BisEMA, the most frequently reported. A total of 59 monomers of which 6 BPA-derivatives were found. 309 materials (56.9%) contained UDMA and 292 (53.8%) TEGDMA. Less than one third of materials identified contained no BPA derivatives. These proportions vary a lot depending on their applications with materials dedicated to dental care of young populations containing the highest proportions of BPA-derivatives monomers. The long-term effects on human health of the different monomers identified including BPA-derivatives monomers is a source of concern. For children and pregnant or lactating women arises the question to take a precautionary principle and avoid the use of resin-based dental materials likely to release BPA by opting for alternative materials.

Wireless power transfer promises to revolutionize the way we use and power mobile devices. However, low transfer efficiencies prevent this technology from seeing wide scale real-world adoption. The aim of this work is to use quasioptics to develop a system composed of a dielectric lens fed by a phased array to reduce spillover losses, increasing the beam efficiency, while working on the antenna system’s Fresnel zone. The DC-RF electronics, digital beamforming and beam-steering by an FPGA, and radiating 4x4 microstrip patch phased array have been developed and experimented upon, while the lens has been designed and simulated. This paper details these preliminary results, where the phased array radiation pattern was measured, showing that the beam is being generated and steered as expected, prompting the lens construction for the complete system experimentation.

The objective of this study was to carry out the extraction and characterization of chitin and chitosan from the exoskeletons of the Farfantepenaeus californiensis species of shrimp, as well as its application in the formulation of polymeric films plasticized with glycerol used in the process of food packaging. The characterization of the extracted polymer was made by Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), and physicochemical analysis of chitin and chitosan, resulting in a theoretical performance of 29.33% and 16.46%, respectively. In terms of quality, it was determined that the extracted chitosan had a molecular weight of 1.10 x105 g/mol and a deacetylation degree of 80.23%, which classifies it as a low-molecular weight chitosan, suitable for food packaging. It was shown that the extracted chitosan is fit for the production of the films by using the casting method, presenting a tension resistance of 1 MPa. The Antibacterial analysis was carried out using Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli), bacterial models commonly found in food. The results showed an effective inhibition capability of the polymeric materials. Overall, the results for both chitosan and the films indicate a high potential for application in the food packaging sector.

The paper presents the design and the implementation of different advanced control strategies that are applied to a nonlinear model of a thermal unit. A data–driven grey–box identification approach provided the physically meaningful nonlinear continuous–time model, which represents the benchmark exploited in this work. The control problem of this thermal unit is important since it constitutes the key element of passive air conditioning systems. The advanced control schemes analysed in this paper are used to regulate the outflow air temperature of the thermal unit by exploiting the inflow air speed, whilst the inflow air temperature is considered as an external disturbance. The reliability and robustness issues of the suggested control methodologies are verified with a Monte–Carlo analysis for simulating modelling uncertainty, disturbance and measurement errors. The achieved results serve to demonstrate the effectiveness and the viable application the suggested control solutions to air conditioning systems. The benchmark model represents one of the key issues of this study, which is exploited for benchmarking different model–based and data–driven advanced control methodologies through extensive simulations. Moreover, this work highlights the main features of the proposed control schemes, while providing practitioners and heating, ventilating and air conditioning engineers with tools to design robust control strategies for air conditioning systems.

Pyrolysis is a combustion process of woody biomass conducted under low or no oxygen conditions. New innovations and the need to limit open burning has resulted in numerous mobile and fixed plant pyrolysis methods that burn a variety of woody residues. Production technologies that reduce the need for open burning, the main source of potential pollutants, fall under the regulations in the Clean Air Act of 1990. This Act is the legal instrument to regulate air pollution at its source across the United States of America and it is implemented and enforced through the Environmental Protection Agency, in coordination with sister agencies. One newer innovation for reducing woody residues and emissions is an air curtain incinerator. Currently, the Clean Air Act regulates stationary solid waste incinerators, and this is also applied to mobile air curtain incinerators burning woody biomass. However, other woody biochar production methods (e.g., flame cap kilns) are not subject to these regulations. Discrepancies in the interpretation of definitions related to incineration and pyrolysis and the myriad of differences related to stationary and mobile air curtain incinerators, type of waste wood from construction activities, forest residues, and other types of clean wood make the permitting regulations confusing as permits can vary by jurisdiction. This review summarizes the current policies, regulations, and directives related to in-woods biochar production and the required permits.

The article analyses the main aspects of upstream social marketing for implementing of mobile government (MGov). The methodology of current research is based on the systematic literature review in the fields of MGov and social marketing. According to our findings, most researchers investigated MGov from the side of citizens (consumers) and emphasised the benefits to them while changing their attitudes and behaviours in employing mobile applications. However, as there is a lack of the researches from the side of governmental bodies, in this paper, we were contrary looking for new meanings, attitudes and values from their perspective. Limitations of employment of MGov occur due knowledge gap among decision makers and public policy formers (upstream audience). Therefore, we argue that upstream social marketing for the upstream audience would bring the success in faster MGov implementation. Specific social marketing would be mostly valuable on the municipal level that is the closest substance to the society. Thus, in our paper we emphasise the benefit of the MGov for the local upstream audience and propose possible external marketers as well as the motivating theses based on these 7P of marketing mix for the successful MGov on municipal level.

AbstractBackground: In digitalization era, health care system was conditioned with the health worker’s ability to adapt media of digital technology. Digital technology media was used to strengthening and fasted the health care for patient and community. Aims: This study aimed to explore the accurate information of health professional utilization digital technology during doing the job at the health facilities in Timor-Leste. Methods: This study was used correctional study with 56 respondents was participated in the study. Was collected the data from 1 to 30 February 2023. Was used questioner of google form based for data collection. Data collection was distributed via online with google form to social media as WhatsApp’s, email and face book and twitter to completed by respondents. The inclusive Criteria are: health professional living in Timor-Leste, to able response the questioner. Was used descriptive analysis in this study. Finding: This study was indicated that majority of health professional was participated in the study as 54,2% man then women have 45,8%. About 100% health professional used hand phone to facilitate their daily activities including related with their work activities. Other side indicated in digital technology tools use are able to use Microsoft word is 78,3%, able to use Microsoft Excel is 76,7% and able to use Power Point is 81,7%. E-mail use about 89,2%, WhatsApp’s use 81,7%, About 74,2% was used zoom/webinars/Google meet application, about 72,5% sad that they were used computer in the work place until now. Around 96.4% need to improve or deepen their knowledge and skills in using ICT in the future to facilitate they are activity. Conclusion: Majority of health professional in Timor-Leste was used the computer, internet, hand phone in daily activities. Majority need to gate the training to improve their knowledge, attitude and psychomotor in the future.

This study aims to determine the impact of the type of ICT usage on household income from main vegetables, agriculture (including main vegetables), and total income. This study is based on surveys and interviews with vegetable farmers using structured questionnaires conducted in three villages in Indonesia, including Cianjur, Sleman, and Malang in West Java, Yogyakarta, and East Java, respectively. The data were collected from 375 respondents selected in each region from November 2021 to March 2022. An econometric model called the multivariate linear regression (MLR) model is used to assess heterogeneous factors that influence the possibility of increasing the income of vegetable farmers. The study found that variables that use ICT as a primary variable, household, marketing, geographical characteristics, and immediate source information in agriculture have a significant impact on household income (P < 0.01) from primary vegetables, agriculture, and total income, with multiple R squares of 70.5, 72.0, 73.7% and F statistics of 28.48, 30.66, and 33.34, respectively. In summary, this novel study shows that the five categories of information technology used in farming and selling of harvest have a positive impact on household incomes

The relationship between child psychology and the widespread usage of mobile devices in the modern day is examined in "The Mobile Dilemma: Child Psychology and the Era of Technological Dependence." The abstract serves as a brief synopsis of the work, highlighting its important ideas and arguments. Concerns concerning the effects of excessive time spent on mobile devices on children's mental health and development have arisen in this age of technology dependency. The essay opens by pointing out the importance of investigating the psychological effects of kids' exposure to mobile gadgets. The effects of mobile phone addiction on learning, memory, and social and emotional health are investigated. The neurodevelopmental implications are explored further in the abstract, with a focus on the impact of mobile technology on brain plasticity and the formation of the developing brain. It offers advice on how to establish appropriate limits for children's screen time, encourages the development of digital literacy, and promotes responsible behavior.The pros and cons of using mobile devices in the classroom are also examined, along with their effects on students' ability to study and the risks and difficulties that could arise from implementing such a strategy. The emotional and social impacts of mobile device addiction are discussed in the abstract. This includes the impact on one's social life, empathy, ability to communicate, and sense of self-worth. The abstract also stresses the importance of interdisciplinary efforts involving parents, teachers, psychologists, and legislators to combat mobile device addiction through intervention and preventative techniques. Future directions are highlighted, with a focus on topics such as mobile technology development, digital well-being, privacy protection, mental health implications, screen time limits, digital literacy, and the impact of cultural and socioeconomic variables.

Mobile Cloud Computing(MCC) is a recent technology used by various users worldwide. In 2015, more than 240 million users used mobile cloud computing which gives a profit of $5.2 billion to service providers. MCC is a combination of Mobile computing and cloud computing. By the combination of these two, it gives various challenges like network access, elasticity, management, availability, security, privacy, etc. Here security issues are considered because both the security issues of mobile computing and cloud computing are considered as important like data security, virtualization security, partitioning security, Mobile cloud application security, Mobile device security. This paper gives a detailed study of security issues in mobile cloud computing and its prevention measures.

Hyperspectral imaging data holds great potential for the different stages of the mining life cycle in active and post-mining environments. However, the technology has yet to reach the stage of large-scale industrial implementation and acceptance. While hyperspectral satellite imagery can achieve high spectral resolution, signal-to-noise ratio (SNR) and global availability with break-through satellite systems like EnMAP, EMIT and PRISMA, limited spatial resolution poses chal-lenges for sectors like mining, which require decimetre to centimetre scale resolution for applica-tions such as reconciliation, ore/waste estimates, geotechnical assessments and environmental monitoring. Hyperspectral imaging from drones (referred to herein as Uncrewed Aerial Systems; UASs) offers high spatial resolution data relevant to the camp/ mine scale, with the capability for frequent, user-defined re-visit times. This has been made possible by the miniaturization of hy-perspectral imaging systems. Collection of data in the visible to near and shortwave infrared (VNIR-SWIR) wavelength regions enables the detection of different minerals and surface altera-tion patterns potentially revealing crucial information for exploration, extraction, re-mining, waste remediation, and rehabilitation. In this paper, we provide a review of relevant studies de-ploying hyperspectral imaging in or applicable to the mining sector, especially for the use of hy-perspectral VNIR-SWIR Uncrewed Aerial Systems. Where required, we draw on previous in-sights derived from satellite or ground-based systems. We also discuss UAS survey planning, and sampling considerations for validation and interpretation.

Transportation systems through the ages have seen drastic evolutions in terms of transportation methods, speed of transport, infrastructure, technology, connectivity, influence on the environment, and accessibility. The massive transformation seen in the transportation sector has been fueled by the industrial revolutions which have continued expansion and progress into the fourth industrial revolution. However, the methodologies of data collection and processing used by the many drivers of this progress differ. The significance of standardized data and its mode of collection cannot be overstated as it has a major impact on the process outcomes. In order to achieve a better understanding of the impact of this, this study methodically reviewed the literature on the subject of the data collection and processing mechanism of 4IR technologies in the context of the transport industry with an emphasis on the areas of accomplishment of several studies and drawing attention to their limitations. Although the industry has advanced significantly as a result of the adoption and application of various research studies in this field, considerable focus needs to be placed in the areas of standardized data collection and computational approaches, which will ultimately assist in achieving various benefits in the transportation industry.

Cobalt oxide nanoparticles are promising candidates for various kinds of practical application. The interest of researchers and scientists in these nanoparticles is due to their unique physical and chemical properties such as density, melting point, magnetic characteristics and band gap. The need to develop high performance and low-cost technologies for obtaining Co3O4 nanoparticles is a major reason in research in this area. The widespread commercial use of Co3O4 nanoparticles will open doors for numerous novel cost effective technologies, which are mostly dependent on the type of synthesis method and raw materials. A possible solution to this problem is to use Cobalt nitrates as a cost-effective precursor using the solution combustion method. Solution combustion synthesis method is one of the best candidate methods that have the potential for high performance and is also cost-effective. This review examines recent progress in the synthesis of Co3O4 nanoparticles by solution combustion method and underscores their significance across various fields, highlighting the need for further research and exploration of their multifaceted applications. In addition, the most recent advancements in the applications of Co3O4 nanoparticles in sensitive sensing, catalysis, supercapacitors/batteries and water treatment/pollutants removal are reviewed and described, focusing on current trends, challenges, and future outlooks.

Image classification in Remote Sensing and Geographic Information Systems (GIS) containing various land-cover classes is essential for efficient and sustainable land-use estimation, and other tasks like object detection, localization and segmentation. Deep Learning (DL) techniques have shown a tremendous potential in the GIS domain. While Convolutional Neural Networks (CNN) have dominated most of the image analysis domain, a new architecture called transformers have proved to be a unifying solution for several AI-based processing pipelines. Vision Transformers (ViT), a variant of transformers can have comparable and in some cases better accuracy than a CNN. However, they suffer from a significant drawback associated with an excessive use of training parameters. In this research we explore several modifications in the vision transformer architectures, especially MobileViT that can be optimized while boosting accuracy. To verify our proposed approach these new architectures are trained on four land-cover datasets AID, EuroSAT, UC-Merced, and WHU-RS19. Experiments reveal that combination of lightweight convolutional layers including ShuffleNet along with depthwise separable convolutions and average pooling can reduce the trainable parameters by 17.85% and yet achieve higher accuracy than the base MobileViT. It is also observed that utilizing a combination of convolution layers along with multi-headed self attention layers in MobileViT variants provide better performance in capturing local and global features unlike the standalone ViT architecture that utilizes almost 95% more parameters than the proposed MobileViT variant.

The rapid growth of smartphone financial services raises the need for secure mobile authentication. Continuous authentication is a user-friendly way to strengthen the security of smartphones by implicitly monitoring a user’s identity through sessions. Mobile continuous authentication can be viewed as an anomaly detection problem in which models discriminate between one genuine user and the rest of the imposters (anomalies). In practice, complete imposter profiles are hardly available due to the time and monetary cost, while leveraging genuine data alone yields poor generalized models due to the lack of knowledge about imposters. To address this challenge, we recast continuous mobile authentication as a few-shot anomaly detection problem, aiming to enhance the inference robustness of unseen imposters by using partial knowledge of available imposter profiles. Specifically, we propose a novel deep learning-based model, namely Local Feature Pooling based Temporal Convolution Network (LFP-TCN), which directly models raw sequential mobile data, aggregating global and local feature information. In addition, we introduce a random pattern mixing augmentation to generate class-unconstrained imposter data for the training. The augmented pool enables characterizing various imposter patterns from limited imposter data. Finally, we demonstrate practical continuous authentication using score-level fusion, which prevents long-term dependency or increased model complexity due to extended re-authentication time. Experiments on two public benchmark datasets show the effectiveness of our method and its state-of-the-art performance.

Our study essentially concerns the dynamic behavior of an SIRS epidemic model in discrete time. Two equilibrium points are obtained; one is disease-free while the other is endemic. We are interested in the endemic fixed point as well as its asymptotic stability. Depending on the parameters which are estimated using the data from US Department of health and SIRS modelling with optimization, two Flip and Transcritical bifurcations appear. We illustrate their diagrams, as well as their bifurcation curves using the method of Carcasses \cite{carcasses1993determination,carcasses1995singularities} for the Flip bifurcation and by an implicit function deduced from such an equation for the Transcritical bifurcation. We use the scanning of the parametric plane to have a global view of the behavior of the model and to highlight the zones of stability of the existing singularities. A superposition of the bifurcation curves with the parametric plane can show the overlap of the curves with the boundaries of the stability domains, which confirms the smooth running of the simulation and its correspondence with the theory, we finish this article with constrained optimal control applied to infection rate and recruitment rate for an SIRS discrete epidemic model. Pontryagin's maximum principle is used to determine these optimal controls. Finally using COVID-19 data in the USA, we obtain results that demonstrate the effectiveness of the proposed control strategy to mitigate the spread of the pandemic.

Artificial intelligence (AI) techniques have grown rapidly in recent years in the context of computing with smart mobile phones that typically allows the devices to function in an intelligent manner. Popular AI techniques include machine learning and deep learning methods, natural language processing, as well as knowledge representation and expert systems, can be used to make the target mobile applications intelligent and more effective. In this paper, we present a comprehensive view on mobile data science and intelligent apps in terms of concepts and AI-based modeling that can be used to design and develop intelligent mobile applications for the betterment of human life in their diverse day-to-day situation. This study also includes the concepts and insights of various AI-powered intelligent apps in several application domains, ranging from personalized recommendation to healthcare services, including COVID-19 pandemic management in recent days. Finally, we highlight several research issues and future directions relevant to our analysis in the area of mobile data science and intelligent apps. Overall, this paper aims to serve as a reference point and guidelines for the mobile application developers as well as the researchers in this domain, particularly from the technical point of view.

Esterquats constitute a unique group of quaternary ammonium salts (QASs) that contain an ester bond in the structure of the cation. Despite the numerous advantages of this class of compounds, only two mini-reviews discuss the subject of esterquats: the first one (2007) briefly summarizes their types, synthesis, and structural elements required for a beneficial environmental profile and only briefly covers their applications whereas the second one only reviews the stability of selected betaine-type esterquats in aqueous solutions. The rationale for writing this review is to critically reevaluate the relevant literature and provide others with a “state-of-the-art” snapshot of choline-type esterquats and betaine-type esterquats. Hence, the first part of this survey thoroughly summarizes the most important scientific reports demonstrating effective synthesis routes leading to the formation of both types of esterquats. In the second section, the susceptibility of esterquats to hydrolysis is explained, and the influence of various factors, such as the pH, the degree of salinity or the temperature of the solution, was subjected to thorough analysis that includes quantitative components. The next two sections refer to various aspects associated with the ecotoxicity of esterquats. Consequently, their biodegradation and toxic effects on microorganisms are extensively analyzed as crucial factors that can affect their commercialization. Then, the reported applications of esterquats are briefly discussed, including functionalization of macromolecules, such as cotton fabric as well as their successful utilization on a commercial scale. The last section demonstrates the most essential conclusions and reported drawbacks that allow us to elucidate future recommendations regarding the development of these promising chemicals.

Providing user confidence in Mobile Government Services (MGS) is essential for the success of mobile government. This study aimed to test the moderating role of techno-skepticism in the impact of crisis management on mobile government. Some scholars have stated that government investment in mobile government services for public administration during the financial crisis is a critical issue for crisis management. In the constantly evolving and changing world, the rapid advancement of technology in modern societies has prompted an acceleration in investments in information and communication technologies. However, due to several inadequacies, citizens seem to respond negatively to the use of certain public technological services, leading them to develop a perspective of techno-skepticism. This issue has been cited in numerous scholarly studies as a critical subject for the effective implementation of technological innovations. The effectiveness of digital technology in the procurement of public services is highly dependent on the perceptions and behaviors of users. In this context, this study measured the attitudes of the participants and the connections between techno-skepticism, mobile government use, and crisis management among Northern Cyprus residents over 18 years old. The study employed a quantitative approach. A 5-point Likert scale was used to collect data by modifying the survey questions to fit the scope of the study. The study participants were selected using the random sampling method to acquire data from a total of 402 citizens. The study findings revealed that techno-skepticism mediates the impact of crisis management on mobile government. As a result, techno-skepticism is a critical and decisive factor in citizens’ mobile government use, affecting its utilization frequency. Techno-skepticism was also found to play a vital role in mobile government use. The current study represents a pioneering effort in testing the moderating role of techno-skepticism in the impact of crisis management on mobile government. It also provides various contributions to theory and practice, particularly in the fields of mobile government and the use of digital technologies.

Background: In an age where information is generally accessible, most of the interest these days has focused on how accessible and convenient technology can be. So small and personal, mobile devices can transform our perception of learning by combining both mobility and convenience. Mobile learning is part of the digital learning landscape alongside e-learning and serious games. However, knowledge about effective design of mobile learning experiences remains of interest with a focus on appropriate design models and the embodiments that can be implemented to achieve the intended educational outcomes. Exploring the instructor's perspective on mobile learning is essential. Therefore, the aim of this study was to investigate the Moroccan instructors' perception and practice of mobile learning to inform the development of an ecologically valid mobile learning integration model. Methods: Higher education Instructors (n=41) were recruited to the study. The Moroccan instructors' perception and their experiences regarding their adoption of mobile learning were collected using an online survey. The analysis focused on their mobile use, perceived IT competency, and opinions on mobile learning. Results: We described most of the instructors' considerations regarding integrating mobile technologies into their teaching activities. We found that most of the mobile learning activities defined by the respondents corresponded to relatively advanced use of mobile devices. More promising, instructors have found innovative ways to use the educational potential of mobile devices. However, the prospect of mobile devices was still to challenge. No or poor Wi-Fi connection, number of devices or limited access, sometimes fees or applications incompatibility were identified as reasons and obstacles to mobile learning usage. Conclusion: Mobile learning is mostly perceived positively among Moroccan instructors allowing many applications and usage to enhance teaching and learning. In this study, a better understanding of aspects and factors influencing the integration of mobile learning in the Moroccan educational context is exposed, helping further the development of an ecologically valid mobile learning integration model. Future work on mobile learning should consider the highly paced evolution of mobile technologies, emphasizing the flexibility of integration frameworks to support instructors and learners.

In some parts of Nigeria, many girls do not attend school, and among those sent to school, many still drop out early. This and other socio-cultural factors affect girls psychologically. There is no doubt that girls need consistent love and tutoring to guide them through the turbulent teen years and beyond. They need a mentor who acts as a friend and a role model. The Mobile-based Mentoring Platform seeks to leverage on mobile technology's affordances to focus on the needs of the girl-child, such as improvement in academic achievement, guidance in career choice, development of self-concept, and esteem. The girl-mentees comments revealed that using the platform provided them frequent access to mentors and access to learning opportunities. The challenges they faced include epileptic internet network, intrusions by parents, and others. Therefore, this paper examined the challenges and benefits of mentoring girls via a mentoring platform.

With the widespread use of mobile phones, increasing use of mobile applications in different areas of life have gained a large place. Between the reasons of the preference of the rapid increasing number of apps in the application markets of the different platforms, the aesthetic appereance of the icons that apps have perhaps the most important one. In this study, the visual symmetrical side of the icons of the most downloaded apss which are developed for preparing to Public Servant Exam in Turkey is emphasized. Two different types of data are obtained with working on the icons with image processing technique by using Mathworks Matlab program and survey method which is applied on Korkut Ata University students. By comparing the obtained data with the binary logistic regression method, it was determined that the visual symmetry in the apps’ icons partially contributed to the aesthetic appreciation.

This study aims to assess using a smartphone app (DecibelX), as a noise measuring alternative to the more costly traditional use of measuring noise levels with a Sound Level Meter (SLM). The study compares the accuracy of the app to readings taken with a SLM and dosimeter, and also evaluates the app’s performance for pure tone and narrow band noise. And a usability study identifies strengths and weaknesses related to usability of the app.

The article delves into the intricate phase transitions of 1-Octadecanol and n-Nonadecane within a binary system, unveiling dynamic structural changes under varying conditions. Through Fouri-er-transform infrared (FTIR) analysis, specific molecular vibrations were identified, shedding light on the molecular composition and interactions. The study highlights the challenges in detecting subtle phase transitions and emphasizes the individuality of molecular behaviours in closely related compounds. The findings underscore the complexity of phase transitions in binary systems and advocate for a nuanced approach to studying molecular structures and behaviours. Addi-tionally, the research contributes valuable insights into the molecular dynamics of Organic Polymer Functional Adsorption Materials, offering implications for synthetic waxy layers in plant epidermis.

This study introduces a novel nanocomposite coating composed of PANI/CeO2 nanocomposite films, aimed at addressing corrosion protection needs. Analysis through FTIR spectra and XRD patterns confirms the successful formation of the nanocomposite films. Notably, the PANI/CeO2 nanocomposite films exhibit a hydrophilic nature. The bandgap energy of the PANI composite film measures at 3.74 eV, while the introduction of CeO2 NPs into the PANI matrix reduces the bandgap energy to 3.67 eV. Furthermore, the electrical conductivity of the PANI composite film is observed to be 0.40 S.cm-1, with the incorporation of CeO2 NPs leading to an increase in electrical conductivity to 1.07 S.cm-1. To evaluate its efficacy, electrochemical measurements were conducted to assess the corrosion protection performance. Results indicate a high protection efficiency of 92.25% for the PANI/CeO2 nanocomposite film.

The ubiquity of mobile sensors (such as GPS, accelerometer and gyroscope) together with increasing computational power have enabled an easier access to contextual information, which proved its value in next generation of the recommender applications. The importance of contextual information has been recognized by researchers in many disciplines, such as ubiquitous and mobile computing, to filter the query results and provide recommendations based on different user status. A context-aware recommendation system (CoARS) provides a personalized service to each individual user, driven by his or her particular needs and interests at any location and anytime. Therefore, a contextual recommendation system changes in real time as a user’s circumstances changes. CoARS is one of the major applications that has been refined over the years due to the evolving geospatial techniques and big data management practices. In this paper, a CoARS is designed and implemented to combine the context information from smartphones’ sensors and user preferences to improve efficiency and usability of the recommendation. The proposed approach combines user’s context information (such as location, time, and transportation mode), personalized preferences (using individuals past behavior), and item-based recommendations (such as item’s ranking and type) to personally filter the item list. The context-aware methodology is based on preprocessing and filtering of raw data, context extraction and context reasoning. This study examined the application of such a system in recommending a suitable restaurant using both web-based and android platforms. The implemented system uses CoARS techniques to provide beneficial and accurate recommendations to the users. The capabilities of the system is evaluated successfully with recommendation experiment and usability test.

Adolescents spend an increasing amount of time on mobile phones. The aim of this study was to assess the relationship between duration of mobile phone use and insomnia and depression in senior high school students. The cross-sectional study was conducted on 295 senior high school students in Japan. Mobile phones were owned by 98.6% of students; 58.6% of students used mobile phones for more than 2 h daily and 10.5% used them for 5 h daily. The risk of insomnia was significantly high in students who used mobile phones for 5 h or more (OR: 3.89 [95% CI: 1.21-12.49]). There was no significant association between depression and duration of mobile phone use. However, individuals who spent 120 min or more using mobile phones for social network services (OR: 3.63 [1.20-10.98]) and online chats (OR: 3.14 [1.42-6.95]) were at risk for depression. Excessive mobile phone use is associated with unhealthy sleep habits and insomnia. Moreover, the excessive use of the social network services and online chats are related to depression rather than duration of mobile phone use. Adolescents should use mobile phones appropriately to avoid sleep disturbances and the impairment of mental health.

This paper explores the transformative impact of computational pharmaceutics, integrating AI, multi-scale modeling, quantum computing, AI-driven drug discovery, and blockchain frameworks. Molecular dynamics simulations provide insights into atomic behaviors crucial for drug design. Quantum computing reduces computational costs for simulating protein-drug interactions. AI and Graph Neural Networks accelerate drug discovery and personalized medicine. Blockchain frameworks facilitate secure pharmacogenetic data sharing. These advancements revolutionize drug development, offering unprecedented efficiency, innovation, and personalized treatments.

Artificial intelligence techniques are now widely used in various agricultural applications, including the detection of devastating diseases such as late blight (Phytophthora infestans) and early blight (Alternaria solani) affecting potato (Solanum Tuberorsum L.) crops. In this paper, we present a mobile application for potato crop pest detection based on deep neural networks. The images were taken from the PlantVillage dataset with a batch of 1000 images for each of the three identified classes. An exploratory analysis of the architectures used for early and late blight diagnosis in potatoes was performed, achieving an accuracy of 98.76%, with MobileNetv2. Based on the results obtained, an offline mobile application was implemented, supported on devices with Android 4.1 or later, also featuring an information section on the 27 pests affecting potato crops and a gallery of symptoms. For future work, segmentation techniques will be used to highlight the damaged region in the potato leaf by evaluating its extent and possibly identifying different types of pests affecting the same plant.

This study aimed to assess the diagnostic accuracy of a mobile application by comparing its diagnoses to those of Orofacial Pain and Oral Medicine specialists and further imaging results (TMJ CBCT and MRI) in 500 patients with temporomandibular disorder (TMD). The research focused on three diagnostic categories: initial specialist diagnoses, final diagnoses after imaging, and the mobile app's diagnoses. The concordance rate, sensitivity, specificity, and positive predictive value of the diagnoses were examined, with further imaging serving as the gold standard. The mobile app demonstrated a high concordance rate compared to both final (0.93) and initial specialist diagnoses (0.86). Sensitivity, specificity, and positive predictive values also indicated strong reliability, affirming the app's diagnostic validity. Although the concordance rate was slightly lower when comparing the app's diagnoses to imaging results (CBCT and MRI), specialist diagnoses yielded similar results. The study suggests that user-friendly diagnostic mobile applications, based on the Diagnostic Criteria for Temporomandibular Disorders, could enhance the clinical management of TMD. Given the reliability of mobile applications for diagnostic purposes, their wider implementation could facilitate the provision of appropriate and timely treatments for patients with TMD.

This research work deals with traffic accidents that are very concurrent in several countries, which in turn contribute to the mortality rate from 19 to 25 years of age and up. In the research work, immediate notifications for traffic accidents were carried out through a mobile application (app) where it will have an emergency button which will help the injured a lot, since the nearest help centers such as the police, fire brigades and the nearest hospitals, so that they can provide support to the people who suffered the accident. In the project, the implementation of Scrum Methodology was used since it served us an amount for the development of the prototypes of the App, and in turn with their roles it did not serve much help for the project, however, passers-by are of vital importance already that they will be the ones to make said report when observing a traffic accident and thus notify the nearest aid centers. As data collection for the creation of the software functions, a survey was carried out with more than 30 people, the functions applied in the application were programmed with the Dart language and generated under the flutter tool in order to be able to distribute it on different platforms such as Play Store and AppStore. The results obtained were the most anticipated since the application fulfills its function, thus reducing deaths and improving the speed of attention to traffic accidents and thus saving a life that is in danger.

Financial Payment has evolved into mobile payment for easy access and convenience. Despite the benefits of mobile payment, the adoption rate is unsatisfactory worldwide. Therefore, understanding the customer's adoption intention factors is essential for both researchers and practitioners. This study examines mobile payment intention and actual use by adapting the integrated framework, which combines the Mobile Technology Acceptance Model and the Theory of Planned Behaviour with additional new constructs found to be related. The new model consists of 12 variables moderated by the individual's experience and is examined via a structured PLS equation mixed-mode methodology. Knowing mobile payment influence will shape the industry strategic decision and socially contribute to transforming society into a cashless society. This paper provides an opportunity to prove the relationship between technology variables and human behaviour concerning mobile payment adoption. In contrast, this study novelty adopted an integrated model that combines MTAM with the TPB.

One of the oldest and common methods of diagnosing heart abnormalities is auscultation. Even for experienced medical doctors, it is not an easy task to detect abnormal patterns in the heart sounds. Most of the digital stethoscopes are now capable of recording and transferring the heart sounds. Moreover, it is proven that auscultation records can be classified as healthy or unhealthy via artificial intelligence techniques. In this work, an artificial intelligence-powered mobile application that works in a connectionless fashion is presented. According to the clinical experiments, the mobile application can detect heart abnormalities with approximately 92% accuracy which is comparable if not better than humans since only a small number of well-trained cardiologists can analyze auscultation records better than artificial intelligence. Using the diagnostic ability of artificial intelligence in a mobile application would change the classical way of auscultation for heart disease diagnosis.

Traditional agricultural extension services rely on extension workers, especially in countries with large agricultural areas. In order to increase adoption of sustainable agriculture, the recommendations given by such services must be adapted to local conditions and be provided in a timely manner. The AgroTutor mobile application was built to provide highly specific and timely agricultural recommendations to farmers across Mexico and complement the work of extension agents. At the same time, AgroTutor provides direct contributions to the United Nations Sustainable Development Goals, either by advancing their implementation or providing local data systems to measure and monitor specific indicators such as the proportion of agricultural area under productive and sustainable agriculture. The application is freely available and allows farmers to geo-locate and register plots and the crops grown there, using the phone’s in-built GPS, or alternatively, on top of very high-resolution imagery. Once a crop and some basic data such as planting date and cultivar type have been registered, the app provides targeted information such as weather, potential and historical yield, financial benchmarking information, data-driven recommendations as well as commodity price forecasts. Farmers are also encouraged to contribute in-situ information, e.g., soils, management, and yield data. The information can then be used by crop models, which, in turn, would send tailored results back to the farmers. Initial feedback from farmers and extension agents has already improved some of the app’s characteristics. More enhancements are planned for inclusion in the future to increase the app’s function as a decision support tool.

Smartphone has become one of the most revolutionary devices in the history of computing. With various kinds of applications, the scope of smartphone has been significantly broadened in the past few years including almost every aspect in our daily life. However, due to the limited on-board resources such as CPU, storage, network bandwidth and battery power, smartphones and the mobile network serving them bring new challenges that have not been encountered in the traditional computing and networking environments. This dissertation focuses on the research areas of improving the network architecture and enhancing the current applications on smartphones. It mainly investigates the areas in the following two directions for three representative categories of mobile services. - In the first direction, the dissertation aims to develop new communication models for smartphone Ad-Hoc networks to achieve efficient communication in the proximity. It is motivated by the fact that smartphone Ad-Hoc networks can help improve the current location-based services and propel new applications. Moreover, the new communication models provide complementary alternatives to the traditional infrastructure-based wireless networks. - In the second direction, the dissertation focuses on improving the other two categories of services, cloud storage services and real-time video streaming services for mobile devices. In the field of cloud storage, we introduce a cloud-assisted approach to provide a set of advanced file operations, such as encryption, decryption and compression, on smartphones. Furthermore, by utilizing the on-board Near Field Communication(NFC) module, we develop an algorithm to securely share the files between mobile devices. For the services of real-time video streaming, we propose approaches that identify a user’s status by analyzing the accelerometer data and then, dynamically adjust the buffer mechanism to save network bandwidth on smartphones.

As people grow a custom to effortless outdoor navigation there is a rising demand for similar possibility indoors as well. Unfortunately, indoor localization, being one of the necessary requirements for navigation, continues to be problem without a clear solution. In this article we are proposing a method for an indoor positioning system using a single image. This is made possible using small preprocessed database of images with known control points as the only preprocessing needed. Using feature detection with SIFT algorithm we can look through the database and find image which is the most similar to the image taken by user. Pair of images is then used to find coordinates of database image using PnP problem. Furthermore, projection and essential matrices are determined allowing for the user image localization ~ determining the position of the user in indoor environment. Benefits of this approach lies in the single image being the only input from user and no requirements for new onsite infrastructure and thus enables a simpler realization for the building management.

The use of mobile phones has increased dramatically among drivers in multiple countries in the past few years. The primary objective of this study was to measure the prevalence of cell phone use while driving in Saudi Arabia and to find whether there is a relationship between car accidents and the use of mobile phones while driving. The secondary objective was to explore general knowledge and attitudes toward traffic regulations related to cell phone usage while driving. This is a cross-sectional study conducted among 585 drivers in Saudi Arabia using a self-reported online survey distributed through social media channels. Our results showed that 78.6% of the participants acknowledged that they use the phone while driving. The percentage who reported car accidents involving them or their friends or relatives while using the phone while driving was 43.8%, along with 71.8% mentioning near misses. The percentage of respondents who thought that using a mobile phone while driving had a strong impact on the driver’s ability to drive was 31.5%. This study highlights the importance of raising awareness about risks of using Mobile phones during driving in Saudi Arabia and it recommends harsher penalties to reduce the use of mobile phones while driving.

This study presents a path planning method for a mobile robot to be effectively operated through a multi-objective decision-making problem. Specifically, the proposed Fuzzy analytic hierarchy process (FAHP) determines an optimal position as a sub-goal within the multi-objective boundary. The key features of the proposed FAHP are evaluating the candidates according to the fuzzified relative importance among objectives to select an optimal solution. In order to incorporate FAHP into path planning, an AHP framework is defined, which includes the highest level (goal), middle level (objectives), and the lowest level (alternatives). The distance to the target, robot’s rotation, and safety against collision between obstacles are considered as objective functions. Comparative results obtained from the artificial potential field and AHP/FAHP simulations show that FAHP is much preferable for the mobile robot’s path planning than typical AHP.

This study proposes a mobile positioning method which adopts recurrent neural network algorithms to analyze the received signal strength indications from heterogeneous networks (e.g., cellular networks and Wi-Fi networks) for estimating the locations of mobile statioThis study proposes a mobile positioning method which adopts recurrent neural network algorithms to analyze the received signal strength indications from heterogeneous networks (e.g., cellular networks and Wi-Fi networks) for estimating the locations of mobile stations. The recurrent neural networks with multiple consecutive timestamps can be applied to extract the features of time series data for the improvement of location estimation. In practical experimental environments, there are 4,525 records, 59 different base stations, and 582 different Wi-Fi access points detected in Fuzhou University in China. The lower location errors can be obtained by the recurrent neural networks with multiple consecutive timestamps (e.g., 2 timestamps and 3 timestamps); the experimental results can be observed that the average error of location estimation was 9.19 meters by the proposed mobile positioning method with 2 timestamps.