Educating for Sustainability involves promoting sustainable competences in students. Not in vain, wider societal changes that ensure a balance between economic growth, respect for the environment and social justice must start with individual actions, implying knowledge, capacity and willingness to act. However, and although there is wide consensus that education should promote the development of competences for life, putting this theoretical tenet into may entail more problems. Competence is most often expressed in general terms without a specific definition of the intervening elements (knowledge, skills, values, attitudes), which may collide with the necessity of teachers – as learning planners - concrete entities on which to base their process of design. So that, in this work we propose a series of indicators that serve to characterize the four dimensions of scientific competence – contents of science, contents about science, value of science and utility of science-. Although they are primarily intended to be used to filter multimedia resources in an educational platform, this proposal of indicators can be extrapolated to the management and selection of a variety of resources and activities, and for sharing the objectives and evidences for the acquisition of competencies.

There is a growing trend among consumers to seek out natural foods and products with natural ingredients. This shift in consumer preferences had a direct impact on both food and pharmaceutical industries, leading to a focus of scientific research and commercial efforts to meet these new demands. The aim of this work is to review recent available scientific data on foods of interest, such as artichoke, gooseberry, and polygonoideae plants, as well as olive oil and red raspberries. Interestingly, the urgency of solutions to the climate change emergency has brought new attention to by-products of grapevine bunch stem and cane, which have been found to contain bioactive compounds with potential health benefits. There is a pressing need for a faster process of translating scientific knowledge from the laboratory to real-world applications, especially in the face of the increasing societal burden associated to non-communicable diseases (NCDs), environmental crises, the post-pandemic world, and ongoing violent conflicts around the world.

Data4HumanRights training materials have been developed as open-source and tailored to limited resource settings where community data collectors often live and work. An overview of how the training material was developed together with community data collectors in Nigeria and Kenya is provided. The paper gives insights into the fundamental principles (i.e., inclusiveness, adaptive, limited resources, gender- and incentive-sensitive) and the structure of the open-access training materials. This resulted in 28 modules designed to be delivered in a face-to-face format in less than one day by a local trainer. To maximize adaptivity, the training modules can be mixed and matched (e.g., as individual modules or a learning path of several modules around a specific training need). The individual modules cover a range of methods and tools that are useful to human rights work, for example, documenting evictions, performing rapid needs assessments after acute crises, community profiling, and monitoring community development indicators. The training materials contain instructions for the facilitator(s) of the training and all necessary training materials to conduct the training. To maximize inclusivity, the training covers basic to advanced topics. Most training modules address basic training topics that can be optimally followed with a mobile phone (to avoid using a computer and printing handouts). The training was developed and implemented with local community groups in Nigeria and Kenya. The material is free to use, adapt, and translate into different contexts and languages.

Curriculum teaching is the basic unit to realize the cultivation and achievement of students’ ability in undergraduate colleges, and it is very important to investigate the influence mechanism of the curriculum system on the achievement states of students' ability. This paper first puts forward the theoretical system and framework of curriculum chains, and constructs a “double-energy and double-space” (DEDS) which consist of the curriculum energy efficiency space and student ability space respectively. Investigating the space-time transformation relationship of curriculum chains in the DEDS, the forward transformation model, inverse transformation model and the rheological model of the achievement states in the curriculum energy efficiency space and student ability space are established. Studying the dynamic evolution mechanism of curriculum chains within the DEDS, the dynamic evolution model, which presents the relationship between achievement states of curriculum energy efficiency/students' ability and curriculum/students' dynamic potential, are established; the control methods of courses/students' dynamic potential based on the proposed dynamic evolution model are developed to ensure the achievements of the graduates’ social ability; the evaluation and detection methods of achievement states of curriculum chains in DEDS are proposed to obtain the actual achievement states of curriculum energy efficiency and students’ ability, and this will provide effective input for the control of curriculums/students’ dynamic potential; the planning and design methods of curriculum chains facing social needs are presented, which can provide theoretical basis for the formulation of the talent training scheme and curriculum system in colleges and universities.

Rice, as a staple crop feeding billions, faces constant threats from various diseases jeopardizing global food security. Precise understanding of disease resistance mechanisms is crucial for developing resilient rice varieties. Traditional genetic mapping methods, such as QTL mapping, provide valuable insights into the genetic basis of diseases. However, the complex nature of rice diseases demands a holistic approach to gain accurate knowledge of it. Omics technologies, including genomics, transcriptomics, proteomics, and metabolomics, enable a comprehensive analysis of biological molecules, uncovering intricate molecular interactions within the rice plant. Integration of various mapping techniques using multi-omics data has revolutionized our understanding of rice disease resistance. By overlaying genetic maps with high-throughput omics datasets, researchers can pinpoint specific genes, proteins, or metabolites associated with disease resistance. This integration enhances the precision of disease-related biomarkers with better understanding of their functional roles in disease resistance. Improvement of rice breeding for disease resistance through this integration represents a significant stride in agricultural science because better understanding of the molecular intricacies and interactions underlying disease resistance architecture leads to more precise and efficient development of resilient and productive rice varieties. In this review, we explore how the integration of mapping and omics data can give a transformative impact on rice breeding for enhancing disease resistance.

This paper presents a system for identification of wind features, such as gusts and wind shear. These are of particular interest in the context of energy-efficient navigation of Small Unmanned Aerial Systems (UAS). The proposed system generates real-time wind vector estimates and a novel algorithm to generate wind field predictions. Estimations are based on the integration of an off-the-shelf navigation system and airspeed readings in a so-called direct approach. Wind predictions use atmospheric models to characterize the wind field with different statistical analyses. During the prediction stage, the system is able to incorporate, in a big-data approach, wind measurements from previous flights in order to enhance the approximations. Wind estimates are classified and fitted into a Weibull probability density function. A Genetic Algorithm (GA) is utilized to determine the shaping and scale parameters of the distribution, which are employed to determine the most probable wind speed at a certain position. The system uses this information to characterize a wind shear or a discrete gust and also utilizes a Gaussian Process regression to characterize continuous gusts. The knowledge of the wind features is crucial for computing energy-efficient trajectories with low cost and payload. Therefore, the system provides a solution that does not require any additional sensors. The system architecture presents a modular decentralized approach, in which the main parts of the system are separated in modules and the exchange of information is managed by a communication handler to enhance upgradeability and maintainability. Validation is done providing preliminary results of both simulations and Software-In-The-Loop testing. Telemetry data collected from real flights, performed in the Seville Metropolitan Area in Andalusia (Spain), was used for testing. Results show that wind estimation and predictions can be calculated at 1 Hz and a wind map can be updated at 0.4 Hz. Predictions show a convergence time with a 95% confidence interval of approximately 30 s.

The use of Artificial Intelligence (AI) applications in a growing number of domains in the latest years has put into focus Ethical Legal and Societal Aspects (ELSA) of these technologies and the relevant challenges they pose. In this paper, we propose an ELSA Curriculum for Data Scientists aiming to raise awareness about ELSA challenges in their work, provide them with a common language with the relevant domain experts to cooperate to find appropriate solutions, and finally, incorporate ELSA in the data science workflow and not be seen as an impediment or a superfluous artifact, rather than an integral part of the Data Science Project Lifecycle. The proposed curriculum uses the CRISP-DM model as a backbone to define a vertical partition, expressed in modules corresponding to the CRISP-DM phases. The horizontal partition includes knowledge units belonging to three strands that run through the phases, namely Ethical and Societal, Legal, and Technical Rendering Knowledge Units (KUs). In addition to the detailed description of the aforementioned KUs, we also discuss the implementation, issues such as duration, form, and evaluation of participants, as well as the variance of the knowledge level and needs of the target audience.

The paper focuses on the application of a multilevel, integrative and territorial approach to the protection of cultural heritage through planning instruments in Serbia. It points out the problems of the sectoral approach and discusses international recommendations that can be integrated into the planning methodology. The case study is the area of Djerdap National Park, which has an already established international and national importance. The research suggests that the cultural heritage in the area, with the exception of the Roman limes, is still recognized at the level of individual localities. The study emphasizes the importance of aligning all levels of governance to safeguard the whole spatial entity rather than focusing solely on its particular areas. The interna-tional and national importance of the planning area contributes to the strengthening of awareness of heritage and its institutional protection. However, the vitality of the area, which is key to its sustainable development, comes from the local level. Planning documents contribute to the inte-gration of local values and local communities into development programs and projects.

This article mainly proposes the point of view that financial literacy curriculum aims to make kinds of people, to make people with financial creativity of resource integration thinking and continuous ‘to conscience’ of morality, which is cultivate a way of thinking that can maximize benefits through the use of resource integration and constantly ‘to conscience’ to achieve goals for participants in financial structures with balanced interests. In this sense, this article argues that financial literacy is to make kinds of people with a financial mindset and constantly strengthen ‘to conscience’ through uniting of knowledge and action to achieve human well-being and benign operation of society. In this sense, this article attempts to determine what is really taught in financial literacy education in terms of curriculum theory. That is to improve creativity by cultivating financial thinking with constant ‘to conscience’. The views of this paper provide a new way of thinking about financial literacy education assessment. This changes the evaluation criteria of financial literacy education from the result-oriented of wealth growth to the process-oriented of financial creativity growth, trying to move the criticism of financial literacy education curriculum and evaluation from controversy to unity.

This study delves into the critical domain of public procurement, specifically focusing on Sustainable Public Procurement (SPP) and Environmental, Social, and Governance (ESG) considerations within the context of South Korea. The aim of this research is to empirically scrutinize the factors influencing the impact index of SPP, with a particular emphasis on services related to labor standards. The investigation spans three years, from January 1, 2019, to July 31, 2021, encompassing state agency orders and post-implementation legal changes. Leveraging the comprehensive Korea On-line E-Procurement Sys-tem(KONEPS) platform, we meticulously collected data, ultimately culminating in 21,573 services meeting our criteria, from which 250 cases underwent an in-depth analysis. The study sheds light on the influence of social responsibility evaluation cri-teria on overall procurement scores, while also uncovering the moderating effects of various factors. The outcomes of this study offer valuable insights into the impact index of social responsibility evaluation criteria within South Korea's public procurement landscape. Factors including procurement year, classification, service period, and estimated price were identified as significant influencers. Moreover, the number and location of evalu-ation criteria items, inclusion of sincerity elements, and the evaluating agency were deemed pivotal determinants of the influence index. These findings hold profound implications for policymakers, procurement practitioners, and researchers and provide a roadmap for optimizing the utilization of social responsibility evaluation criteria to advance responsible and sustainable procurement practices. Future research avenues include conducting further study of additional moderat-ing variables, expanding datasets to encompass a broader spectrum of procurement contexts, and evaluating the long-term repercussions of social responsibility evaluation on procurement outcomes. These endeavors promise to further refine and advance public procurement practices in South Korea and beyond.

Sensory integration is an essential function of human life, and its decline causes difficulties in the quality of life, especially in older adults. In this study, we proposed an arm-reaching task based on a virtual reality head-mounted display (VR-HMD) system to assess sensory integration in daily life, and examined whether reaching task performance was associated with age and resting-state functional connectivity (rsFC) between the brain regions of interest involved in sensory integration. We hypothesized that performance during a reaching task with multiple cognitive loadings would be affected by aging. The gap angle between the reaching hand and target positions was compared between older and middle-aged adults as a measure of sensory integration function. In addition, rsFC, which was significantly correlated with the gap angles of individual participants in the older adult group, was identified using resting-state functional magnetic resonance imaging data. The mean gap angle was significantly larger in the older adults than in the middle-aged group and was also significantly correlated with connections between the left primary motor area and the left inferior temporal gyrus, temporo-occipital part. Because the connectivity between the areas is known to be related to visuomotor integration, the results suggest the involvement of visuomotor integration in the decline of sensory integration function in old age and the validity of the gap angle during the proposed VR-HMD task as an index for the decline in function.

In the world's first pig-to-human cardiac xenotransplant, the elevated levels of porcine cytomeg-alovirus (PCMV) are considered key factors contributing to patient mortality. This has renewed attention to PCMV, a virus widely prevalent in pigs. Currently, there are no effective drugs or vaccines targeting PCMV, and its high detection difficulty poses challenges for prevention and control research. In this study, antiviral small hairpin RNA (shRNA) was selected and inserted into the Rosa26 and miR-17-92 loci of pigs via a CRISPR/Cas9-mediated knock-in strategy. Further in vitro viral challenge experiments demonstrated that these genetically edited pig cells could effec-tively limit PCMV replication. Through this process, we constructed a PCMV-infected cell model, validated partial viral interference sites, enhanced gene knock-in efficiency, performed gene editing at two different gene loci, and ultimately demonstrated that RNA interference (RNAi) technology combined with CRISPR/Cas9 has the potential to generate pig cells with enhanced antiviral infec-tion capabilities. This opens up possibilities for the future production of pig populations with anti-viral functionalities.

Technology has transformed aeroponics, providing numerous advantages over traditional soil-based agriculture. However, there remains a need for comprehensive information on the types of technology employed in aeroponics and their impact on the growing process. This paper presents a literature review of 47 studies published between 2012 and 2023 in peer-reviewed journals and conference proceedings. As a result, it identifies the status and tendencies in the usage of technology in aeroponics as well as the main opportunities and challenges. Furthermore, this paper introduces the Technology Adoption and Integration in Sustainable Agriculture (TAISA) model. TAISA is a model that identifies the degree of technology integration in any sustainable agriculture system to determine how technology affects production and quality. Overall, the systematic review suggests that technology can play a vital role in improving the efficiency and sustainability of aeroponic farming. However, careful consideration must be given to the costs and technical requirements associated with using these technologies. Moreover, the TAISA model reveals that technology has primarily been employed in creating new processes that are not possible to implement without the help of technology. Therefore, we conclude that technology use has taken root in aeroponics and can be promoted to improve sustainable agriculture.

This study explores the implementation of an interdisciplinary curriculum in product and media design education and its impact on knowledge innovation and competency development. The curriculum is based on scaffolding theory, incorporating design proposals, workshops, digital design, marketing tests, and marketing activities guided by teachers and mentors from a branded ceramic workshop. The research findings demonstrate that the interdisciplinary curriculum facilitates knowledge innovation and fosters the development of students' professional skills, creativity, and problem-solving skills. The study also highlights the importance of stable scaffolding, including artefact, peer, and teacher support, which significantly contributes to cultivating transformational competencies, as outlined in the 2030 OECD Learning Compass. Additionally, the collaboration with Shanshing Four Seasons Celadon Studio on a patented ceramic product, "Funny Monkey," is a tangible example of the journey towards a triple-helix knowledge economy. This research underscores the importance of interdisciplinary curricula in promoting knowledge innovation and integrating transformational competencies in education. Scaffolding theory provides practical guidance for student learning and teaching strategies, presenting a sustainable roadmap for developing interdisciplinary curricula and offering a concrete and transferable pedagogical prototype for educational innovation.

The United States is plagued with the highest rates of preventable metabolic diseases it has ever seen, and while poor nutrition is increasingly recognized as a critical contributing factor, good nutrition has been shown to be a potent factor in prevention and management of these illnesses. Notably, nutrition is inextricably intertwined with farming practices and the stewardship of our environment – particularly its soil. In this proposal, we propose a method to expose medical students to basic agricultural and environmental knowledge regarding the production of food, as well as educate them in practical nutrition education within the interactive, case-based, and longitudinal preclinical curriculum at Case Western Reserve University School of Medicine (CWRU SOM). We propose a two-part approach; first: integrating relevant topics in nutrition, culinary medicine, and farming practices into the preclinical blocks through Official Learning Objectives, and second: an optional 8-week, zero credit elective for students interested in pursuing a deeper understanding of these topics. Through these interventions, we believe courses like this will support a generation of physicians able to understand health from soil to plate with a consideration for the environment in addition to exemplifying healthful lifestyles themselves. We believe these kinds of future physicians will be the most effective in treating (and ideally reversing) the chronic disease epidemic.

This paper presents a study about the integration of Piezoelectric Energy Harvesting Systems (PE-EHS) in building envelopes for powering Fiber Bragg Grating (FBG) sensors, enabling efficient and low-consumption monitoring with the objective to leverage Structural Health Monitoring (SHM). The research includes preliminary tests conducted in a real environment to validate the PE-EHS when fully integrated into the façade, capturing mechanical vibrations generated mainly by wind loads. Based on these activities, the final configuration of PE-EHS is defined to provide a complete system for façade monitoring. This integrated system includes the Piezoelectric Generator (PEG), Supercapacitor (SC), Power Conditioner Circuit (PCC), Fibre Optic Sensing (FOS) Interrogator, and the IoT Gateway trans-mitting measurement data within an Internet of Things (IoT) monitoring platform. This configuration is tailored to address the challenges related to the structural integrity of building envelopes. Results demonstrate a potential for a stand-alone solution in the façade sector, but, raising issues for certain limitations, requiring further investigation. In particular, the study emphasizes constraints related to the energy production of PE-EHS for façade integration. It highlights the necessity to carefully consider these limitations within the broader context of their applicability, providing insights for the informed deployment of Piezoelectric Energy Harvesting technology in building envelope monitoring.

In this paper we investigate into the possible resurrection for the aether and it’s compatibility with the theory of relativity. We revisit the Michelson-Morley experiment and expose some of the major inadequacies. In this regard, we have presented the true/corrected form of the Michelson-Morley experiment. We have tried to revise the interpretational aspect of the mathematical formalism regarding the metric of Minkowskian space-time in addendum with it’s relationship to the two theories of time. We herein have also tried to restrain some of the quantum mechanical issues arising from the mainstream understanding of the mathematical formalism of the Minkowskian manifold. Essentially, we have argued in favour of aether to be incorporated into our mathematical formalism as well the physical understanding of the universe.

Human longevity is an important but difficult goal due to the extreme complication of human body. If people could repeatedly transfer their consciousness from old bodies to new ones, their lifespan might be prolonged extremely. However, there are several difficulties which prevent the achievement of such a technique. In this paper, we propose an approach that can transfer human consciousness indirectly, and avoid or significantly relieve those difficulties. The strategy of our approach is to integrate the consciousnesses of two bodies (old and new) into a unique consciousness. By doing so, the consciousness is extended to the new body. After that, the consciousness shrinks and remains in the new body when the old body dies. This may also apply to integrating more than two bodies of human, or animal, or even across different species. After investigating thousands of literatures, we find quite strong evidence (related discoveries and technologies) that can support the proposed approach and its advantages. Beside prolonging human lifespan, the approach could also have other meaningful applications.

This paper studies the duration patterns of unemployment spells for immigrants and the determinants of unemployment’s completion into one of a number of studied labour market states in Finland. We estimate a duration model for unemployment with competing risks of its terminating into employment, labour market training or economic inactivity. Taking into account the wide period of observation and opportunities to analyse processes of labour market integration during various periods of economic development in Finland, in combination with the individualistic character of the labour careers of immigrants, this research is beneficial owing to the many various findings concerning labour market integration of immigrants. The approach undertaken in this research has a dualistic “descriptive-dynamic” character under which integration is understood as a never-ending process, which is conditioned by a time period of long-term existence and a context of solitary action. We find that transitions out of unemployment spells have a cyclical character; after every new “cycle” in unemployment, the probability of terminating unemployment decreases further. We also find that ascriptive factors make sense in the process of job-placement of immigrants from unemployment. Therefore, the gender, education and age of immigrants, as well as the effect of the period in which first unemployment occurred, potentially predict transitions out of unemployment and further labour market integration of immigrants.

The technology for determining the point’s coordinates on the earth’s surface using the global navigation satellite system (GNSS) is becoming the norm along with ground-based methods. In this case, determining coordinates does not cause any particular difficulties. However, to identify normal heights using this technology with a given accuracy, special research is required. The fact is that satellite determinations of geodetic heights (h) over an ellipsoid surface differ from ground-based measurements of normal height (HN) over a quasi-geoid surface by a certain value called quasi-geoid height or height anomaly (ζ). In relation to determining heights of a certain territory, the concept of geoid height (N) is usually operated when dealing with a geoid model. In this work, geodetic and normal heights are determined for 5 control points in three different regions in Lebanon, where measurements are carried out using GNSS technology and geometric levelling. The obtained quasi-geoid heights are compared with geoid heights derived from the global Earth model EGM2008. The results obtained showed that, in the absence of gravimetric data, the combination of global Earth model data, geometric levelling for selected areas and satellite determinations allows the creation of a high accurate altitude network for mountainous areas.

The purpose of this article is to address two questions that will aid researchers in understanding FinTech’s inception, development, and potential impact on the stability of the financial system. First, it explains why financial technology is a current phenomenon. While many of the underlying technology for FinTech breakthroughs have been around for some time, it is only recently that financial institutions and entrepreneurs have begun to apply them to financial goods and services. Supply and demand factors in "conventional" financial innovation have been studied, and they have been found to converge, leading to a high rate of innovation. And second, this article explains why FinTech is being covered in greater depth than other types of innovation. This study introduces the concept of "depth" of innovation as a means of answering this question. The more fundamental the innovation, the more it will affect the financial sector. In this paper, we demonstrate that many recent developments in the field of financial technology (FinTech) are truly revolutionary advances, with far-reaching implications for the financial services industry. In addition to the benefits of more adaptability, higher transformational potential might bring increased risk to economic security.

The steep decline in the price of wind and solar photovoltaics provides a possibility to decarbonize electricity deeply and affordably. This study uses HOMER Pro energy modeling tool to model an optimized grid-connected renewable energy system for a community in southern Alberta, Canada. The study's goal is to identify the best renewable energy technology combinations that can provide electricity at the lowest levelized cost of energy (LCOE) and has lesser greenhouse gas emission as compared to the electricity produced by traditional fossil fuel. Gleichen, is a small town in southern Alberta and is near to numerous commercial wind and solar projects given the region’s high quality renewable resources. “Tri-brid” systems consisting of wind turbines, solar photovoltaics, and battery energy storage systems (BESS) are considered and compared based on electricity prices, net present cost, and greenhouse gas emissions savings. This tri-brid system is connected to the grid to sell excess electricity generated or buying electricity when there is less or no availability of solar and wind. The tri-brid energy system has an estimated LCOE of 0.0705 CAD/kWh which is competitive with the price of electricity generated by natural gas and coal which is 0.127 CAD/kWh.

Background and Aims: Paramedics attend an unprecedented number of drug poisoning events daily in British Columbia (BC), Canada due to the ongoing public health crisis related to an increasingly toxic and unregulated supply of illicit drugs. Paramedics have the potential to support alternative models of care to reduce harm, but their perspectives towards harm reduction initiatives are polarized. Understanding the drug-related substance use content in paramedic curriculum documents is important for deploying effective harm mitigating programs. The objective of this study was to understand what drug-related substance use content currently exists within paramedic curriculum documents in British Columbia. Methods: We performed a document analysis of curriculum documents in BC’s paramedic training institutions, the primary program textbook, and the 2011 National Occupational Competency Profile (NOCP). We used the Checklist for Assessment and Reporting of Document Analysis (CARDA) tool to perform our analysis. We analysed and coded documents both inductively and deductively and subsequently combined, refined, and used the codes to inform the development of themes via reflexive thematic analysis. Results: Of the 44 documents analysed, 22 included codes relevant to the research questions. Paramedics are primarily taught to care for people who use drugs in an acute drug-poisoning response only, with little consideration of holistic care, and no meaningful mention of harm reduction. Some stigmatizing language was found within the content. Conclusions: Many opportunities to introduce holistic models of care for people who use drugs along the entire continuum of care are unaddressed by paramedic curriculum documents in BC. Curriculum developers should include people who have lived and living experience of drug use in the co-design of educational programs involving their care. Further qualitative analyses are required to evaluate the relationship between paramedic education and provider-based stigma.

This paper applied case study research to design architectures for green-field supply chain integration. The integration design is based on a case study of a supply chain integration of 5 companies, operating in different, but supply chain complimenting industry sectors. The case study research is applied to design and validate the architectures in a real world scenario. The supply chain integration architectures enable the conversion of individual into integrated strategies. The architectures are categorised and the process develops into a conceptual system for identifying the correlations between individual participants’ strategic areas of interest and the integrated supply chain areas of interest. The novelty of this paper is a conceptual system for green-field supply chain integration architectures, which can be applied in real world by supply chain practitioners.

The aim was to implement a value-promoting program (Teaching Personal and Social Responsibility, TPSR) and to assess its impact on students. Method: The program was applied for 8 months with 257 students from three secondary school centres (151 boys and 106 girls) with a mean of 15.97 years old (SD = 2.31). They were in three groups, 67 students (control group), 90 students receiving at least 60% of the total teaching time the value-promoting program (experimental group for global education, EG-GE) and 100 students (experimental group only for physical education, EG-PE). As main results improvements were found in the EG-GE for responsibility, psychological mediator index, self-determination index, resilience, climate and prosocial behaviours. In the EG-PE improved were observed in the self-determination index, classroom climate and prosocial behaviours. Female students and from EG-GE improve much more than males and from EG-PE. The outcomes in psychological variables can be higher if TPSR is applied to the whole subjects apart from physical education. These results are even more pronounced for female students in personal and social responsibility. It is worth highlighting the importance of coordinating educational institutions to facilitate the involvement of the greatest number of teachers.

As of not long ago, understanding the administrative conduct of cells has been sought after through autonomous investigation of the transcriptome or the proteome. In view of the focal creed, it was commonly accepted that there exist an immediate correspondence between mRNA records and produced protein articulations. In any case, late examinations have demonstrated that the relationship among's mRNA and Protein articulations can be low because of different factors, for example, unique half lives and post record apparatus. In this manner, a joint investigation of the transcriptomic and proteomic information can give valuable experiences that may not be translated from singular examination of mRNA or protein articulations. This article audits the current significant methodologies for joint investigation of transcriptomic and proteomic information. We order the various methodologies into eight primary classes dependent on the underlying calculation and last investigation objective. We further present analogies with different spaces and talk about the current exploration issues around there.

1) Public health remains a tiny portion of the undergraduate pharmacy curriculum and the material is integrated into other modules. The objective of this study is to describe the UK undergraduate pharmacy curriculum, including its public health content; 2) Methods: A qualitative method (content analysis of websites) was used to describe the UK undergraduate pharmacy curriculum and teaching and learning policy. This involved selecting relevant concepts and then quantifying their presence and the relationships between them. The NVivo software was used to carry out ‘group queries’ and visualisation of results; 3) Results: Public health remains an optional module in the curricula of many UK schools of pharmacy. Several public health-related topics are often integrated into other modules, but UK undergraduate pharmacy curricula are still dominated by traditional pharmacy modules; and 4) Conclusions: Most of the curricula analysed were dominated by traditional pharmacy modules designed to enhance students' knowledge and skills. The skill set of UK pharmacy students with respect to macro-level public health activities needs to be improved in order to enhance pharmacists’ contribution to public health.

Recent studies have demonstrated a relationship between poor vitamin D status and respiratory infections and diarrhea among young children. Acute lower respiratory infections (ALRI) and diarrhea are among the two most important causes of death in under-5 children. In this analysis, we examine the extent to which vitamin-D deficiency (<10 ng/ml) predicts these outcomes using data from a randomized controlled trial (RCT) of daily folic acid and/ or vitamin B12 supplementation for six months in 6 to 30 months old children conducted in Delhi, India. Of the 960 subjects who had vitamin-D concentrations measured, 331(34.5%) were vitamin-D deficient. We found, after controlling for relevant potential confounders (age, sex, breastfeeding status, wasting, stunting, underweight, anemia status at base line and season), the risk of ALRI was significantly higher among vitamin-D deficient (OR 1.26; 95% CI: 1.03 to 1.55) compared to vitamin-D-replete children in the six months follow-up period. Vitamin-D status was not significantly associated with episodes of diarrhea and clinical pneumonia. The extent of causal relationship of vitamin-D status and ALRI needs to be explored in further studies.

After the end of colonial rule in 1997, the Hong Kong education system has been experiencing a policy reform on Senior Secondary Education (NSS) Curriculum commenced in September 2009 aiming to educate students as globalized Hong Kong citizens for the Western. Although previous scholars argued that it is hard to differentiate between domestic values and the Western values in account of curriculum development (Sewpaul, 2007), this study demonstrates an analysis using the dichotomy to investigate how local curriculum, especially in the post-colonial areas, embrace both the Western values and domestic values. Using content analysis on the NSS curriculum guides, this article evaluates the influence of the Western values and Chinese values in the NSS curriculum through investigating: (1) how the Western values and Chinese values was incorporated into the curriculum throughout its development (2) why some values are more significantly highlighted in the curriculum guide. Findings include that more Chinese values are involved in the curriculum documents. This may be because of the upholding of domestic values as a post-colonial city. The Western values which are academically related are greatly incorporated into the local curriculum.

This research examines the effects of the implementation of an educational programme of mindfulness training using Virtual Reality (VR) with students in adapted vocational training. The aim of this programme is to instruct and strengthen attention and self-regulation skills in relation to the learning process, with the objective of reducing anxiety and impulsivity in students, contributing to promoting sustainability in education, as well as reducing inequalities. The development and implementation of this project was carried out in IES Teguise in Lanzarote (Spain) with 11 students with intellectual disabilities who used the Virtual Reality Mindfulness application called TRIPP for three months. The use of Virtual Reality offers immersive experiences, while mindfulness enables concentration, which directly contributes to higher academic performance. After the implementation of the programme, it is observed that the use of this emerging technology provides students with a sense of calm and well-being, which translates into improvements in their academic grades, promoting equal and quality education in line with the Sustainable Development Goals (SDGs).

The goal was to assess dental students' perception of digital technologies after participating in a CAD/CAM exercise for scanning, designing, and manufacturing computer-aided provisional fixed dental restorations. A survey was conducted among second-year dental students (pre-D2 and post-D2), first- (D1, negative control), third-, and fourth-year dental students (D3 and D4, positive controls). Only OSU College of Dentistry students who completed the activity and completed the surveys were included. Seven questions were rated, which evaluated changes in knowledge, skill, interest, the importance of technology availability in an office, patients' perception of technology, the importance of having the technology, and the expected frequency of clinics utilizing the technology. Statistical analysis was performed with a significance level of 0.05. A total of 74 pre-D2 and 77 post-D2 questionnaires were completed. Additionally, 63 D1, 43 D3, and 39 D4 responded to the survey. Significant differences were found for "knowledge" and "skill" between pre-D2 and post-D2, and pre-D2 and control groups (p<0.001). There was a significant difference between post-D2 and all controls for “interest” (p=0.0127) and on practice preference for technology availability (p<0.05). There were significant results between post-D2 and all controls regarding the importance of technology availability in an office (p<0.001) and the expected frequency of clinics utilizing the technology (p=0.01). No significance was found for "patient's value of technology" and "the importance of having the technology". The presence of technology in the practice and educational academic environments significantly improved students’ interest and perception of knowledge and skill.

In an increasingly changing world, critical thinking is one of the key skills that ensure organisations' competitive advantage. Thus, in higher education institutions there is an accelerating emphasis on developing critical thinking (CT) among students. This paper presents the results of three experimental courses (Pedagogy and didactics of financial accounting, Virtual Learning Environments in Economics, Business Communication), using a blended learning method, aimed at improving students' CT skills. The three courses were delivered by both higher education teachers and trainers from the labour market. After analysing the data from the three experimental courses, it will be possible to assess whether the intervention of labour market trainers contributed to the improvement of students' critical thinking skills, and, in particularly at the level of which components improvements have been identified.

Caregiving thinking is the ability to make connections between thought and emotion and encourages man to build a system of reflective value to judge matters compassionately and lovingly. Therefore, this study aims to investigate the components of caring thinking in Persian books in the first year of secondary education. This research is a descriptive and content analysis using the Shannon Entropy method. The sources analyzed are three volumes of the textbook of the first year of high school in 2021-2022. The research tool is a content analysis checklist according to the components of caring thinking, the validity of which was verified by Five experts in education. According to the analysis of the content of the book under study, it can be stated that in the Persian textbooks of the first year of high school, the critical factor of the component of normative thinking (0.2051), the component of appreciative thinking (0.2043), the component of active thinking (0.2020), Was the component of empathetic thinking (0.1957) and the component of affective thinking (0.1929). Therefore, the coefficient of the importance of the components of caring thinking in the Persian books of the first year of high school is not the same, and balance is not observed in regulating the content of these books. Considering the vital role of caring thinking in students' lives, it is suggested that the authors of textbooks pay attention to this crucial issue while reviewing the content of Persian books in the first year of high school.

The advance of the medical field in the 21st century has influenced the development of many innovations, including in medical education. PBL (problem-based learning) is one of the pedagogical approaches that has been studying and implementing worldwide to attract medical students’ attention with their learning style and learning environment. China is the most significant “receiver” country of foreign students in Asia, and clinical medicine is one of the most chosen majors for undergraduate. In China, PBL has been implementing in some schools, but mostly with the local students and only a few implementations to the international students. International medical students in China faced a variety of challenges during their studies. In this review paper, we give the solution to adapt to the challenges by focusing on the implementation the integrated organ/system curriculum/syllabus with the PBL method to the school system with the support of the school stakeholders and students’ role.

Both drones and laser scanners digitally take the as-built context of an object into the computer and the data taken is transmitted to a Building Information Modeling (BIM) world to create ac-curate 3D models. Although the laser scanner is the leading method of the Scan-to-BIM proce-dure, many professionals indicate drawbacks of the technology and point out the drone is an al-ternative that can improve the shortcomings, leading to the UAV-to-BIM process. Korean con-struction industry plans to implement the drone technology for scrutinizing as-built construc-tion quality by 2025. However, the drone is not popular in the construction projects. Korean universities where Construction Engineering and Management program have been implement-ed are requested to develop a drone curriculum for construction professionals. Since the majori-ty of the professionals are not familiar with drone operation, in order for the schools to be suc-cessful in developing the curriculum, it is very necessary to perform a preliminary experimental study for identifying the essential education contents that are appropriate to drone beginners. The main objective of this paper is to perform the study for the drone beginners and recognize the recommendations and the framework of drone curriculum that will be beneficial for the schools to develop a comprehensive curriculum later on.

A drone performs comparable function to a laser scanner in the construction quality monitoring, following Scan-to-BIM process. Both technologies digitally capture the as-is environment into the computer and the data captured is transferred to a BIM world to create accurate as-built models. Although the laser scanner is the dominant method of the Scan-to-BIM process, a number of digital professionals point drawbacks of the method and present the drone is an alternative that can improve the drawbacks thereby leading to UAV-to-BIM process in parallel with the Scan-to-BIM. Korean construction industry plans to utilize the two technologies for monitoring construction operation quality in major public projects by 2025. While contractors need competent engineers to be competitive in the projects, the two technology applications are not so popular to the construction projects in Korea and very few experts skillful and knowledgeable of the technologies are available. Korean universities are requested to develop the curriculum of the technologies for the contractors. To be successful in progressing the curriculum, it is very essential to implement a preliminary study with the technologies minimizing the potential failure in operating the curriculum later on. This study performs empirical research on the technologies and identify valuable lessons beneficial to develop the UAV-to-BIM curriculum for the construction engineers.

The American Academy of Arts and Sciences suggested the definition of science literacy emphasize how crucial understanding the scientific process and the ability to evaluate conflicting scientific evidence is. The purpose of this article is to present an evidence-supported curriculum covering the fundamentals of logic, reasoning, and argumentation skills to address the emphasized basic knowledge, skills, and abilities required to be scientifically literate, which will prepare the public to understand and engage with science meaningfully. An analytic-synthetic approach toward understanding the notion of public is taken using a theoretical biomimetics framework that identifies naturally occurring objects or phenomena that descriptively captures the essence of a construct to facilitate creative problem-solving. In the present case, the problem being solved is how to reconcile what is meant by public, how it ought to be interpreted, the different levels of confidence in science that exist, and various understandings of science all with one another. The results demonstrate there is an inherent denotative-connotative inconsistency in the traditional notion of public that can be explicated through the concept of a fractal allowing for comprehension of the relationship between public confidence in, and understanding of, science.

Within the past decade, the aerospace engineering industry has evolved outside the constraints of using single, large, custom satellites. Due to increased reliability and robustness of commercial off the shelf (COTS) printed circuit board (PCB) components, missions instead have transitioned towards deploying swarms of smaller satellites. This approach significantly decreases the mission cost by reducing custom engineering and deployment expenses. Nanosatellites are able to be quickly developed with a more modular design at lowered risk. The Alpha mission at Cornell Space Systems Studio is fabricated in this manner. However, for the purpose of this mission, only one satellite was initially developed. This manuscript will discuss a systems engineering approach to the development of this satellite. As a disclaimer, this manuscript is written from a systems perspective. Therefore it will follow many subsystems from a wide range of functionalities. The research in this manuscript was kept broad with the hope to contribute to the mission as a system, through a range of development phases including validation and verification of existing methods. The two systems that will be primarily focused on are the Attitude Control System (ACS) of the carrier nanosatellite (cubesat), and the RF communications on the ex-creted picosatellites (chipsat). Milestones achieved in chipsat RF include chipsat to chipsat communication, chipsat to SDR ground station communication, packet creation, error correction, appending a preamble, and filtering the signal. Achievements on the ACS side included controller traceability/verification and validation, software rigidity tests, hardware endurance testing, Kane damper and IMU tuning. These developments matured the technological readiness level (TRL) of our systems in preparation for satellite deployment.

Cancer being a multi-factorial disease, a multi-target approach is needed to treat it with minimal side-effects. Therefore, combined use of a proven herbal formula with chemo-therapy could be the better therapeutic. It may maintain homeostasis by synergistically targeting multiple signaling pathways involved in tumorigenesis, thus circumventing recurrence, resistance, and immunosuppression. Here we aim to determine the effectiveness and safety of an FDA-approved herbal formula, SR033 in combination with 5-fluorouracil (5FU) and paclitaxel (PTX). We report chemo-sensitization and chemo-synergy in HeLa and MCF-7 cell lines, immunomodulation of COX-2, PD-L1, VEGF and TGFβ and overall survival in-vitro and in-vivo via oral and topical delivery of SR033. In-vitro, SR033/5FU significantly reverses 5FU and PTX-resistance, lower COX-2, and PD-L1, resulting in TGFβ/ VEGF axis modulation. Furthermore, the study suggests that due to anti-oxidative potential of SR033, oral administration exerts chemo-preventive activity and restores cellular compartment in solid tumor and ascites-bearing mice models. Furthermore, the topical application, SR033L with low-dose 5FU increases survival rate, reduces tumor growth, and completely restores local and peripheral neutrophil-lymphocyte ratio in solid tumor mice model. The study indicates that SR033 could be a strong candidate in combination with low-dose 5FU and PTX for a holistic approach to cancer management.

Lately Silicon Carbide (SiC) and Galium Nitride (GaN) based high frequency power conversion has gained immense popularity which stems from relatively low switching energy, robustness to high temperature operation, wide-band gap and superior thermal limits. While this aspect inherently results in a high-density power stage design, the design of adjoining passive components, particularly magnetics, needs careful attention. This is especially true if the compatibility of core and winding options and their performance is limited with the use of higher switching frequency. In this regard, this paper presents a brief review of existent research conducted in materials, optimization and integration of magnetics for single and three phase applications, ranging from filters, resonant inductors to isolation transformers. Design knobs pertaining to medium voltage (MV) applications, low-voltage (LV) applications, e-mobility sector such as more electric aircrafts (MEAs) and electric vehicles (EVs) are discussed. Guidelines for magnetics design are summarized for each application with a projected roadmap on future trend for magnetics.

Higher education equips youth with the requisite knowledge and skills for navigating environmental education and sustainability. The current study aims to test a comprehensive model for integrating environmental education and sustainability principles within the higher education ecosystem. The model emphasizes problem-based and service-learning approaches, technological integration, and behaviour change models to foster environmental education, and community engagement and enhance overall well-being. In this study, researchers examined the impact of curriculum, extracurricular activities, and community engagement as independent variables on dependent variables namely environmental education, sustainability, and well-being while also considering the mediating role of the undergraduates' awareness level. Data was collected from a higher education academic Institute in Riyadh, Saudi Arabia. The variance-based structural equation modeling (SEM) technique using Smart-Partial Least Squares (PLS) software was used to test these hypothesized relationships empirically. The study findings revealed a significant positive impact of curriculum development, extracurricular activities, and community engagement efforts on elevating undergraduates' awareness levels. Awareness levels mediated the effect of environmental education, sustainability, and well-being, highlighting the need to integrate environment-related topics into academic and extracurricular activities. This underscores higher education's potential to shape eco-conscious leaders by infusing environmental education into academic life. These findings have implications for higher education institutions, policymakers, and community organizers, emphasizing the importance of a holistic approach to environmental education for a sustainable society. By fostering environmental awareness among youth and integrating it into broader societal initiatives, educational institutions can play a crucial role in shaping a generation committed to sustainability and well-being.

The paper delves into an extensive exploration of the integration of the circular economy paradigm within the realm of additive manufacturing (AM). The objective is to comprehensively investigate existing methodologies for structuring the symbiotic relationship between circular economy and additive manufacturing, while meticulously analyzing the current research gap concerning the implementation of circular economy principles in additive manufacturing practices. A thorough review focusing on the sustainability of additive manufacturing within the circular economy framework was conducted. This review aims to recognize and delineate pertinent aspects related to post-use material valuation in AM, recyclability of materials, and the environmental footprint associated with these processes. Emphasis was placed on the significance of examining circular economy facets concerning additive manufacturing processes to establish a holistic understanding. The overarching goal of this review is to augment knowledge regarding the potential advantages and benefits derived from the seamless integration of circular economy principles within AM. By elucidating the activities essential to attain compliance with the Sustainable Development Goals, this study endeavors to illuminate the pathway toward promoting sustainable development through the harmonious marriage of additive manufacturing and the circular economy.

Text book ought to be viewed as one of the numerous sources educators can attract after making a powerful exercise and may offer a system of direction and introduction. The analysis of textbook forms a necessary part in academics so as to devise the most appropriate content. The present study made a comparative account of textbooks for Grade 5 Social studies taught in public (i.e., Punjab textbook) and private sector (Oxford textbook) of Pakistan. The comparison was made on key features and on themes suggested by National Curriculum Council (2017) as a standard for textbook publishers. The findings demonstrated that both books contain activities and are clearly written, however, PTB is cheaper, possess low paper quality than OTB and was revised in 2018 whereas OTB has not revised since 2010. It is also suggested that both textbooks do not contain enough information as per NCC’s standard. It is suggested that government should take notice about it and publishers should be bound to deliver only that material in education sector that is according to the devised set of standards.

The integration of artificial intelligence (AI) technologies into business practices presents both opportunities and challenges for Sabah, Malaysia. This dynamic abstract explores the latest research problem at the intersection of AI and business in Sabah, focusing on optimizing resource allocation in agriculture and enhancing tourism experiences through AI-driven solutions.In Sabah's agricultural sector, AI holds immense potential to revolutionize traditional farming practices. With limited arable land and unpredictable weather patterns, farmers face significant challenges in maximizing crop yields while minimizing resource inputs. Through the application of machine learning, remote sensing, and IoT devices, researchers aim to develop precision farming techniques that can analyze soil health, monitor crop growth, and predict pest outbreaks with unprecedented accuracy. By optimizing resource allocation and enhancing decision-making processes, these AI-driven solutions have the potential to revolutionize Sabah's agriculture industry, promoting sustainability and resilience in the face of environmental uncertainties.Moreover, the tourism industry in Sabah stands to benefit from AI integration, particularly in enhancing visitor experiences and destination management. With its diverse natural landscapes and rich cultural heritage, Sabah attracts tourists from around the globe. AI-powered recommendation systems, tailored to individual preferences and behavior, have the potential to provide personalized travel itineraries, optimize resource allocation, and boost visitor satisfaction. Additionally, natural language processing (NLP) algorithms can analyze online reviews and social media sentiments, providing valuable insights for destination marketing and management strategies. By harnessing the power of AI, Sabah can elevate its tourism offerings, attract more visitors, and enhance its reputation as a premier travel destination.However, alongside these opportunities, challenges abound in the integration of AI into Sabah's business landscape. Concerns regarding data privacy, cybersecurity, and ethical implications must be carefully addressed to ensure the responsible and sustainable deployment of AI technologies. Furthermore, the digital divide and limited access to technology in rural areas pose barriers to widespread adoption, necessitating comprehensive strategies for capacity building and infrastructure development.In conclusion, the advancement of AI integration in Sabah's business landscape holds immense promise for driving innovation, economic growth, and sustainability. By addressing the research problems outlined in this abstract, researchers, policymakers, and industry stakeholders can collaboratively navigate the opportunities and challenges of AI integration, paving the way for a prosperous and inclusive future for Sabah, Malaysia.

This study investigates the impact of financial integration on international dynamics from the perspective of volatility shocks. To achieve this, I employ an IRBC model with time-varying volatilities, recursive preferences, and a global bank. The model demonstrates that volatility shocks trigger precautionary saving incentives, but the specific effects vary based on the type of shock. In the presence of productivity volatilities, countries with a higher level of financial integration exhibit greater divergence in their business cycles, while financial integration tends to result in more synchronized business cycles in the face of financial volatilities. Disregarding volatility shocks would underestimate the impact of financial integration on the comovement of business cycles across countries. Furthermore, welfare analysis also indicates that financial markets play a crucial role in enhancing social welfare, regardless of the type of volatility.

In the modern world, stress has become a pervasive concern that affects individuals' physical and mental well-being. To address this issue, many wearable devices have emerged as potential tools for stress detection and management, by measuring heart rate, heart rate variability (HRV), and various matrices related to it. This literature review aims to provide a comprehensive analysis of existing research on HRV tracking and Biofeedback using smartwatches and finger monitor/sensor pairing with reliable 3rd party mobile apps like Elite HRV, Welltory, and HRV4Training specifically designed for stress detection and management. we apply various algorithms and methodologies employed for HRV analysis and stress detection is discussed, including time-domain, frequency-domain, and non-linear analysis techniques. Prominent smartwatches, such as Apple Watch, Garmin, Fitbit, Polar, and Samsung Galaxy Watch, are evaluated based on their HRV measurement accuracy, data quality, sensor technology, and integration with stress management features. We describe the efficacy of smartwatches in providing real-time stress feedback, personalized stress management interventions, and promoting overall well-being. To assist researchers, doctors, and developers use smartwatch technology to address stress and promote holistic well-being, we discuss the data's advantages and limitations, future developments, and the significance of user-centered design and personalized interventions. Keywords: smartwatch; stress; wearable device; heart rate variability; comparative analysis

Rural tourism plays an increasing role in maintaining sustainable rural development. In-11 tegrating culture into rural tourism is multifaceted. Local communities have often been regarded as 12 homogeneous, and different voices within them are selectively presented or re-interpreted by pow-13 ers. A better understanding of how and why cultures are integrated into rural tourism is urgently 14 needed. This paper aims to investigate (1) the aims and motives of tourism managers to integrate 15 cultural concepts into rural tourism; (2) who has participated in the cultural integration process; and 16 (3) how cultures have been integrated into rural tourism. Based on a scoping literature review, we 17 found that cultures could add more attractions, such as historical heritage, artwork, cultural land-18 scape, customs, food, and language, to the natural landscape and bring more tourists to rural areas. 19 However, integrating cultures into rural tourism is not always successful. Conflicts of interest 20 among different stakeholders are also often found. Some of the worst cases of cultural integration 21 have even destroyed the original natural landscape and local cultures. While cultural integration is 22 complicated, injustice and perverse effects do not have to be a consequence of integrating cultures 23 into rural tourism. Multi-way communication among tourism providers, managers, and consumers 24 can mitigate disruptive outcomes and unlock positive social outcomes.

Molecular methods have revolutionised virtually every area of biology, and metazoan phylogenetics is no exception: molecular phylogenies, molecular clocks, comparative phylogenomics, and developmental genetics have collectively transformed our understanding of the evolutionary history of animals. Moreover, the diversity of methods and models within molecular phylogenetics has resulted in significant disagreement among molecular phylogenies as well as between these and traditional phylogenies. Here, I argue that tackling this multifaceted problem lies in integrating evidence to infer the best evolutionary scenario. I begin with an overview of recent developments in early metazoan phylogenetics, followed by a discussion of key conceptual issues in phylogenetics revolving around phylogenetic evidence and theory. I then argue that integration of different kinds of evidence is necessary for arriving at the best evolutionary scenario rather than the best-fitting cladogram. Finally, I discuss the prospects of this view in stimulating interdisciplinary cross-talk in early metazoan research and beyond.

The need to consider sustainability has substantially increased the complexity of implementing construction and infrastructure projects and new management practices have emerged during the past decade to tackle the global sustainability challenges, where the engagement and coordination of broader competences from stakeholders throughout the supply chain is required. This new project management paradigm has been accompanied by greater attention to the concept of collaborative business arrangements, often called partnering, that has emerged in construction and infrastructure projects to improve project deliveries. However, there are uncertainties about the optimal strategy to foster, integrate and maintain the required collaboration, particularly in sustainable management practices in infrastructure maintenance projects. This paper addresses these uncertainties, based on a single case study of an infrastructure maintenance contract involving an extensive collaborative business arrangement. The findings reveal that different collaborative practices affect diverse aspects of sustainable project management. Further, the extensive collaborative business arrangement has promoted sustainable deliveries based upon organizational learning and continuous improvements. Thus, this study offers an encouraging example of how extensive collaboration can be fostered and play a key role in sustainable project management practices.

The growing interest in the use of energy storage systems to improve the performance of tramways has prompted the development of control techniques and optimal storage devices, displacement, and sizing to obtain the maximum profit and reduce the total installation cost. Recently, the rapid diffusion of renewable energy generation from photovoltaic panels has also created a large interest in coupling renewable energy and storage units. This study analyzed the integration of a photovoltaic power plant, supercapacitor energy storage system, and railway power system. Random optimization was used to verify the feasibility of this integration in a real tramway electric system operating in the city of Naples, and the benefits and total cost of this integration were evaluated.

We present a first formal analysis of specific and complete local integration. Complete local integration was previously proposed as a criterion for detecting entities or wholes in distributed dynamical systems. Such entities in turn were conceived to form the basis of a theory of emergence of agents within dynamical systems. Here, we give a more thorough account of the underlying formal measures. The main contribution is the disintegration theorem which reveals a special role of completely locally integrated patterns (what we call ι-entities) within the trajectories they occur in. Apart from proving this theorem we introduce the disintegration hierarchy and its refinement-free version as a way to structure the patterns in a trajectory. Furthermore we construct the least upper bound and provide a candidate for the greatest lower bound of specific local integration. Finally, we calculate the i-entities in small example systems as a first sanity check and find that ι-entities largely fulfil simple expectations.

Purpose：Herein, aimed to explore routines to improve students' physical health.Methods:We explored the integration of extracurricular fitness running "Lerun" into college physical education curriculum. Firstly, experimental and the referring groups were selected by experimental method, in which only the experimental group was intervened in combination with extracurricular fitness running "Lerun". After two experiments, the experimental and referring groups were compared in terms of physical fitness (speed, strength, endurance, flexibility, explosive force, etc.), sports skills, body shape, cardiopulmonary function, etc. Results:After T-test, significant differences (p<0.05) between these two groups prove that the students' physical health status of experimental group is better than that of the referring group. Conclusion：It manifests that integrating extracurricular fitness running "Lerun" into college physical education curriculum is an effective means to improve students' physical health.

Background: The COVID-19 outbreak has accelerated the huge difference between medical care and disease prevention in Chinese medical institutions. This study aimed to investigated the relationship between the symbiotic units, environments, models, and effects of the integration of medical and disease prevention. Methods: This cross-sectional study involved 762 employees of public hospitals in 11 cities in Zhejiang Province by random stratified sampling. We analyzed the influence paths of elements in the mechanism of integration of medical and disease prevention and the mediating effect of symbiotic models among symbiotic units, symbiotic environments, and effects for on this integration. Results: The path coefficient of symbiotic unit on the symbiosis model was 0.46 (p&lt;.001), the path coefficient of symbiotic environment on symbiosis model was 0.52 (p&lt;.001). The path coefficient of the symbiotic unit and environment was 0.91 (p&lt;.001). The symbiotic models exhibited a partial mediation effect between symbiotic units and the effect of this integration. Sobel test = 3.27, β = 0.152, and the mediating effect accounted for 34.6%. Conclusions: It is suggested that Health policy-makers and public hospital managers should provide sufficient symbiotic units, establish collaborative symbiotic models, and improve the effects of integration of medical and disease prevention in public hospitals.

The primary objective of this study is to examine the extent of financial integration between Latin American and US financial markets, particularly in light of recent efforts to foster integration through trade agreements. Spanning from January 1, 1990, to December 31, 2019, the sample focuses on major market indices and key sectors. Financial integration is quantified using a DCC multivariate GARCH model, incorporating a smooth transition model, structural breaks, and regression-based approaches. Results indicate increased comovement with the US for main market indices in Argentina, Chile, Colombia, Mexico, and Peru, while Brazil shows a decrease. Similar trends are observed in sectoral analyses. The study also reveals heightened correlation post-trade agreements. Structural break analysis highlights significant shifts in dynamic correlations for countries with US free trade agreements. These findings support the argument of increased financial integration, bearing significance for portfolio diversification and international policy formulation.

In the dynamic landscape of Sabah's socio-economic development, the integration of AI technologies holds both promise and challenge. While AI has the potential to drive economic growth, enhance productivity, and elevate quality of life, it also brings forth concerns regarding job displacement, skill gaps, and unequal distribution of benefits. The latest research problem in the realm of AI and employment in Sabah revolves around ensuring inclusive and sustainable development amidst this technological disruption. This encompasses two key dimensions: skill development and education, and labor market dynamics. Addressing the research questions necessitates a multifaceted approach. Firstly, in the realm of skill development and education, there is a critical need to assess the adequacy of existing programs in equipping the workforce with AI-driven skills. Strategies such as promoting STEM education, fostering digital literacy, and facilitating lifelong learning initiatives, particularly among marginalized communities, are essential. Additionally, fostering collaboration between stakeholders and implementing curriculum reforms are pivotal steps in enhancing the alignment between educational curricula and the demands of an AI-driven economy.

In this paper, we dive into the exciting world of wireless communication, focusing on how millimeter-wave technology and Multiple-Input Multiple-Output phased array antennas are shaping the future of 5G and the upcoming 6G technologies. We cover the latest advancements in millimeter-wave and beam-forming technologies, emphasizing their role in enhancing network security and efficiency in automotive vehicles through dual radar communication. Our discussion spans the benefits, applications, challenges, and solutions of these technologies individually from millimeter-wave to beam-forming technology and joint radar communications, alongside a look at their theoretical and practical implementations. We emphasize the integration of beam-forming technology in joint radar communications for future automotive vehicles and its impact on automotive systems, smart cities, and the Internet of Things (IoT). Looking ahead, we discuss the potential of these technologies to transform future tech landscapes, while also addressing the security implications of merging communication and radar capabilities. This paper aims to provide a clear view of the advancements and prospects of millimeter-wave, beam-forming, and dual radar communication technologies.

Sensory processing is a crucial function of the nervous system that significantly affects a large portion of the population, particularly older individuals who may be dealing with different forms of dementia. The global population of people aged 65 or older has reached a substantial count of around 703 million, representing approximately 9% of the total global population. Within this demographic, an estimated 5-8% of those aged 60, highlighting the growing need to address sensory modulation challenges for healthy aging. Sensory diet, derived from sensory integration theory, provide a tailored approach to modulating sensory experiences and triggering neuroplastic changes in the brain. Recent neuroimaging studies have revealed intricate structural and functional alterations in the brain associated with the implementation of sensory diets. Furthermore, the integration of the Metaverse, augmented reality, and virtual reality has opened up personalized experiences, fostering cognitive stimulation and emotional well-being for individuals during aging. This article offers a comprehensive exploration of the effectiveness of sensory diets in enhancing attentional control, self-regulation, and alleviating sensory-related distress among the healthy aging and dementia population. By employing precise quantitative evaluations such as sensory processing scales and advanced neuroimaging methodologies, it presents solid evidence of the tangible impact of these interventions. Emphasizing the importance of interdisciplinary cooperation and leveraging technological advancements, the article underscores the crucial need for customized sensory diets to optimize sensory processing and improve the overall well-being of older individuals contending with sensory modulation challenges and dementia.

Building Information Modelling (BIM) methodology have been optimizing the construction activity in all sectors: multidisciplinary designs development; construction planning and monitoring; building management and maintenance. A BIM environment aggregates several disciplines and different skillsets and in order to control and improve the quality of a BIM project, a BIM manager is required. The BIM manager has the responsibility to coordinate all tasks involved in a building design and associated activities usually workout over the project documents. The professional can access to various discipline models, located in a shared board, and request for amendments if inconsistencies are detected. The present study issue is illustrated with three building cases were distinct specific projects, disciplines and tasks were elaborated: collaboration between disciplines (architecture, structures and construction); structural analyses and reinforcement details; quantity take-off of materials and cost estimation; construction scheduling and simulation. Although there are limitations in the implementation of BIM methodology in all sectors and stages, within the construction industry, BIM have been bringing an important improvement in the quality of a building design, reflected in the quality of the final product. BIM methodology is a current demand in the construction industry supported on advanced technology and in an adequate management of projects, were the BIM manager has an important role.

Construction productivity entails a wide range of work combinations. When human resources are scarce, it is critical to replace manpower with machinery, and calculating machinery productivity is crucial. Traditional labor productivity methods, however, cannot address dredging complex multi-attribute decision-making (MADM) problems. Aiming to address the limitations of the traditional labor productivity method, this paper extends the data envelopment analysis (DEA) and proposes a new dredging productivity evaluation method. The proposed method can solve the problem of evaluating various combinations of factors (single-input, multiple-input, sin-gle-output, and multiple-output) and the problem suggesting that the efficiency of the DEA method'scalculation results is equal to 1. The effectiveness of the proposed method was verified using reservoir dredging examples. The simulation results show that the proposed method has broad applicability, can accurately evaluate the related dredging performance issues, and provide directions for construction managers to improve labor productivity.

Isometric exercises for physiotherapeutic rehabilitation are often prescribed, with little quantification of the load being prescribed. This article aimed to provide a framework and practical examples of how the physiotherapist may take a more quantitative evidence-based approach to isometric assessment, monitoring, and exercise prescription of knee osteoarthritis, by integrating a strain gauge into their practice. Strength measures to monitor were discussed. A series of fourteen studies were reviewed, with the intent of identifying isometric exercises that had been utilized in the rehabilitation of knee osteoarthritis. Of the fourteen studies, the three most identified isometric exercises were seated knee extension, knee flexion, and the supine straight leg raise. The integration of strain gauge technology with these exercises provided the focus of the remainder of the article.

A time integration scheme based on semi-Lagrangian advection and Laplace transform adjustment has been implemented in a baroclinic primitive equation model. The semi-Lagrangian scheme makes it possible to use large time steps. However, errors arising from the semi-implicit scheme increase with the time step size. In contrast, the errors using the Laplace transform adjustment remain relatively small for typical time steps used with semi-Lagrangian advection. Numerical experiments confirm the superior performance of the Laplace transform scheme relative to the semi-implicit reference model. The algorithmic complexity of the scheme is comparable to the reference model, making it computationally competitive, and indicating its potential for integrating weather and climate prediction models.

Urban flood risk mapping is an important tool for the mitigation of flooding in view of human activities and climate change. Many developing countries, however, lack sufficiently detailed data to produce reliable risk maps with existing methods. Thus, improved methods are needed that can improve urban flood risk management in regions with scarce hydrological data. Given this, we estimated the flood risk map for Rasht City (Iran), applying a composition of decision-making and machine learning methods. Flood hazard maps were produced applying six state-of-the-art machine learning methods such as classification and regression trees (CART), random forest (RF), boosted regression trees (BRT), multivariate adaptive regression splines (MARS), multivariate discriminant analysis (MDA), and support vector machine (SVM). Flood conditioning parameters applied in modeling were elevation, slope angle, aspect, rainfall, distance to river (DTR), distance to streets (DTS), soil hydrological group (SHG), curve number (CN), distance to urban drainage (DTUD), urban drainage density (UDD), and land use. In total, 93 flood location points were collected from the regional water company of Gilan province combined with field surveys. We used the Analytic Hierarchy Process (AHP) decision-making tool for creating an urban flood vulnerability map, which is according to population density (PD), dwelling quality (DQ), household income (HI), distance to cultural heritage (DTCH), distance to medical centers and hospitals (DTMCH), and land use. Then, the urban flood risk map was derived according to flood vulnerability and flood hazard maps. Evaluation of models was performed using receiver-operator characteristic curve (ROC), accuracy, probability of detection (POD), false alarm ratio (FAR), and precision. The findings showed that the CART method is most accurate method (AUC = 0.947, accuracy = 0.892, POD = 0.867, FAR = 0.071, and precision = 0.929). The results also demonstrated that DTR, UDD, and DTUD played important roles in flood hazard modeling; whereas, the population density was the most significant parameter in vulnerability mapping. These findings indicated that machine learning methods can improve urban flood risk management significantly in regions with limited hydrological data.

This paper introduces a method for tunnel point cloud and BIM model integration and cross-section monitoring, providing information to analyse tunnel cross-sections and surrounding rock deformation, and support for tunnel maintenance and reconstruction. Three types of data are processed for the integration: laser scanning point cloud, BIM tunnel model and terrain model from oblique photogrammetry. An adaptive BIM modelling scheme is proposed for tunnels with alien structures. Precise spatial registration of the data sets is conducted by applying singular value decomposition (SVD) algorithm to calculate transformation parameters from the point cloud model to the BIM model. Since the tunnel central line has high-order derivability, a cross-section calculation method based on tangent vector is proposed to obtain the cross-sectional profile of tunnels at any mileage. The proposed method has been verified by applying it to a tunnel reconstruction project. The experiment results show that the tunnel point cloud and the BIM model were highly coincident after the integration. The developed program can effectively get the cross-section of the tunnel at any mileage, and correctly express the spatial relationship between the BIM tunnel, the point cloud of tunnel and the external mountainous terrain.

In this paper we explore extending the concept of common cross-study Common Data Element concepts beyond simple demographics to cover disease-specific concepts relevant to imaging. We test interactively linking the resulting database to the associated images in a federated manner. We examine the use of existing standards, not only for terminology, but for interchange of serialized data in forms familiar to imaging and clinical trials specialists and their dedicated systems. Our intent is to perform preliminary work to inform both the upcoming Imaging Data Commons specifically, as well as more general integration projects beyond imaging.

The use of artificial intelligence (AI) is becoming more prevalent across industries as diverse as healthcare, finance, and transportation. Artificial intelligence is based on the analysis of large data sets and requires a continuous supply of high-quality data. However, using data for AI is not without its challenges. This paper comprehensively reviews and critically examine the challenges of using data for AI, including data quality, data volume, privacy and security, bias and fairness, interpretability and explainability, ethical concern, and technical expertise and skills. This paper examines e these challenges in details and offers advices on how companies can address them. By understanding and addressing these challenges, organizations can harness the power of AI to make smarter decisions and gain a competitive advantage in the digital age.

Co-integration and Causality was built to conduct studies on causality relation between carbon intensity and coal consumption leading to providing important basis for the transition to a low carbon economy. The EG two-step method was performed to study the relation between carbon intensity and coal consumption of China during 1990-2015 and the co-integration and Granger test was constructed to build up the co-integration and error correction models for analysis of the interaction between carbon intensity and coal consumption. The results showed that in long term there is a stable co-integration relation and a positive correlation between carbon intensity and coal consumption; whereas fluctuations exist in short term and there is a one-way Granger causality of carbon intensity with respect to coal consumption.

About a decade ago, active optical crop canopy sensors are being used to manage in-season variable nitrogen (N) fertilization in cornfields to match the plant demand that occurs mid season, increasing the efficiency compared to broadcast N applications. There were also initiatives of using ultrasonic sensors to measure plant height on-the-go for N application and crop water demand estimation, but no studies have integrated the optical, ultrasonic and canopy temperature for crop water stress assessment. The objective of this chapter is to evaluate the crop water status using infrared thermometry integrated with optical and ultrasonic sensors. Specifics objectives are: (i) evaluate the corn canopy temperature under different previous crop, N rates and irrigation levels; (ii) test a procedure for water stress assessment in commercial cornfields using the integration of sensors, (iii) correlate plant based sensor measurements (N status, plant height and canopy temperature) with grain yield, soil attributes and detailed topographical features, and (iv) study the spatial dependence of canopy temperature. This study was conducted in one small plot study area and on three producer’s fields in 2010. The small plot experiment consisted of two irrigation levels (70 and 100% of evapotranspiration – ET), two previous crop schemes (corn after corn – CC and corn after soybeans – CS), and four N rates (0, 75, 150, 225 kg N ha^-1). Canopy temperature, optical reflectance and plant height was measured from R2 until R6 in the small plots. At the producer’s fields, three long strips across center pivots were used to have a non-limited N and water crop and then continuous georeferenced sensors measurements were taken during side-dress (V11 growth stage) in about 10 hectares in each field. In the small plot study the crop canopy temperature was influenced by the irrigation levels and N rates. The procedure proposed could be used to identify zones in the producer’s field where water stress can be a yield limiting factor other than N derived. Inside the zones considered that water stress played a major whole, there were low correlations between plant height, plant N status and canopy temperature, indicating that the canopy temperature had more influence from water stress than vegetation cover. Concave and lower elevation areas had higher yields compared to convex and high elevation, showing that the detailed elevation mapping can be beneficial to delineate stables zones that possibly could be used in variable irrigation systems. The spatial dependence of canopy temperature was over 65 meters across producers’ sites, showing that the commercial high clearance applicator’s swath width was adequate to obtain accurate maps. The integration of plant N status, plant height and canopy temperature was beneficial to detect water stressed zones in the field. Opportunities can be foresee also for on-the-go N fertilization using integration of these sensors because is likely that water stress can be confounded with different N supply during the growing season and in different zones in the field.

The reuse and integration of data give big opportunities, supported by the F.A.I.R. data principles. Seamless data integration from heterogenous sources has been interest of the geospatial community for long time. However, 3D city models, BIM and information supporting smart cities present higher semantic and geometrical complexity, which pose new challenges, never tackled in a comprehensive methodology. Building on previous theories and studies, this paper proposes an overarching workflow and framework for multisource (geo)spatial data integration. It starts from the definition of use case-based requirements for the integrated data, guides the analysis of integrability of the involved datasets, suggesting actions to harmonise them, until data merging and validation. It is finally tested and exemplified on a case study. This approach allows the development of consistent, well-documented and inclusive data integration workflows, for the sake of use cases automation in various geospatial domains and the production of Interoperable and Reusable data.

“For me then this is the real problem with quantum theory: the apparently essential conflict between any sharp formulation and fundamental relativity. That is to say, we have an apparent incompatibility, at the deepest level, between the two fundamental pillars of contemporary theory...” J. S. Bell (2004, p. 171) The inability to delineate a unified physical ontology that accounts simultaneously for the laws of special relativity and the results of quantum experiments has been a defining problem in physics for more than 100 years. Although various primitive ontologies (including Bohmian pilot wave, spontaneous collapse, and objective collapse theories) along with wave function realism ontologies, many-worlds interpretations, and multi-field theories address the tension between special relativity and quantum mechanics, none has successfully resolved it. This analysis addresses the problem by positing an ontic, mixed ontology composed of a “discrete” 4D spacetime and a physical, ultra-high dimensional (3 x N) “Planck Space.” Together, Planck Space and the three spatial dimensions of 4D spacetime form a tightly integrated ((3 x N) + 3) hyperspace (the “Dual Ontology”). 4D spacetime’s three spatial dimensions and the N dimensions of Planck Space are composed of two substructures: discrete, three-dimensional, quantized units of space ("Planck Spheres") and an ontic State of Absolute Nothingness (the "SOAN") whose sole physical characteristic is onticness. Critically, the Dual Ontology’s structure replaces 1) the continuous, differentiable manifold of 4D spacetime with a discrete 4D spacetime and 2) mathematical 3N configuration spaces with a physical (3 x N) Planck Space. Moreover, structurally and dynamically, the Dual Ontology is predicated on the one-to-one mapping and identity between the Planck Spheres that simultaneously form 4D spacetime and Planck Space. The one-to-one mapping and identity physically and theoretically support an integrated quantum dynamics based upon the dynamic evolution of single and N-body quantum states in 4D spacetime in full compliance with the laws of special relativity and the instantaneous collapse of all quantum states in an ontic Planck Space, where special and general relativity and more generally, 4D spacetime’s laws of physics, do not apply.

Multi-junction solar cells comprised of stacked III-V semiconductor junctions represent the highest-efficiency photovoltaic technology, with recent demonstrations exceeding 47% efficiency . Optimizing the design and thickness of each junction is critical for maximizing performance . This work utilizes Silvaco TCAD tools to systematically optimize a 5-junction cell based on AlInP, AlGaInP, AlGaInAs, GaInP, GaAs, InGaAs, and Ge similar to recent record cells . The junction thicknesses are varied using a predictive profiler to sample the parameter space . For each combination, the spectral absorption and I-V characteristics are simulated to determine the efficiency . Statistical analysis identifies the optimal thickness set that maximizes performance to 26% under 1 sun illumination .

This paper is concerned with developing an efficient numerical algorithm for fast implementation of the sparse grid method for computing the $d$-dimensional integral of a given function. The new algorithm, called the MDI-SG ({\em multilevel dimension iteration sparse grid}) method, implements the sparse grid method based on a dimension iteration/reduction procedure, it does not need to store the integration points, nor does it compute the function values independently at each integration point, instead, it reuses the computation for function evaluations as much as possible by performing the function evaluations at all integration points in a cluster and iteratively along coordinate directions. It is shown numerically that the computational complexity (in terms of CPU time) of the proposed MDI-SG method is of polynomial order $O(Nd^3 )$ or better, compared to the exponential order $O(N(\log N)^{d-1})$ for the standard sparse grid method, where $N$ denotes the maximum number of integration points in each coordinate direction. As a result, the proposed MDI-SG method effectively circumvents the curse of dimensionality suffered by the standard sparse grid method for high-dimensional numerical integration.

This paper developed a new theory for supply chain architecture, and engineering design that enables integration of the business and supply chain strategies. The architecture starts with individual supply chain participants and derives insights into the complex and abstract concept of green-field integration design. The paper presented a conceptual system for depicting the interactions between business and supply chain strategy engineering. The system examines the decisions made when engineering the business strategy, with regards to the supply chain design. The system derived with a new understanding of how strategies are integrated, and what are the implications for engineering successful strategies. The study revealed that supply chain design is not considered in great detail before architecting the business strategies. Thus, companies consequentially experience supply chain problems that are likely to be detrimental to the growth potentials. The paper also derived with the findings that proactive and pre-emptive involvement of supply chain participants in the strategy engineering process, would lead to a more robust strategic design.

Abstract Introduction: With the containment of the COVID-19 pandemic in Côte d'Ivoire, efforts were made to seamlessly integrate COVID-19 vaccination into the national immunization program. A collaborative initiative involving UNICEF, WHO, GAVI, and partner organizations resulted in the creation of the COVID-19 Vaccine Integration Mapping Tool. This paper presents a case study documenting the field testing of the Integration Mapping Tool and assessing the integration of COVID-19 vaccination within primary healthcare and routine immunization in Côte d'Ivoire. The study aims to describe the pilot process, gather feedback on tool usefulness and challenges, and establish integration priorities through roadmap development. Methods: Under the guidance of the Ministry of Health and Universal Coverage Cabinet, a workshop was conducted with participants from major health programs to field test the tool. Data analysis was performed using Excel, and the results were presented through tables, heat maps, and line graphs. Results: The first-of-its-kind field test of the Integration Mapping Tool in Cote d'Ivoire showcased its potential to bring key partners together to discuss the current state of integration, to improve transparency about resource allocation resource allocation, and enhance data management for the successful incorporation of COVID-19 vaccination into existing immunization systems. The integration of COVID-19 vaccines in Côte d'Ivoire showed a moderate level of progress, with improvement needed in resource allocation, payment systems, targeting of highest risk groups and vaccine administration. Support should be increased for target population identification, distribution points, quality of care mechanisms, and health personnel training. Health information systems and access to essential medicines were relatively satisfactory. Integration into existing programs, intersectoral collaboration, national health strategy, communication strategy, community participation, and data utilization require improvement. The post-workshop satisfaction survey gave the tool a score of .7 out of 10. Early lessons from Côte d'Ivoire provide guidance for enhancing integration, focusing on data-driven decision-making, collaboration, stakeholder engagement, and effective leadership. Conclusion: The successful field test of the Integration Mapping Tool (IMT) in Côte d'Ivoire marks a groundbreaking milestone, exemplifying the transformative potential of innovative tools in immunization practices. The IMT's application sets a precedent for seamless COVID-19 vaccination integration worldwide, emphasizing data-driven decision-making, collaboration, timing, and leadership. The pilot exercise's success in Côte d'Ivoire was attributed to political commitment, well-facilitated workshops, assessments, and the fact that the team in CI had previously already developed some initial integration plan.

On February 28th, 2023, Spanish Royal Decree 150/2023 as published, approving the plans for the management of the maritime space of the five Spanish marine demarcations. This Royal Decree Law inaugurates the Planning of the Maritime Space in Spain. Terrestrial Space Planning is very advanced, both in the legislation and in the instruments that are enabled to organize this space, from the national scale to the municipal scale, passing through the regional, provincial, and supra-municipal scales. Naturally, both Planning must converge and thus speak of an Integrated Space Planning. In some of the countries that we can take as global references, this convergence in the form of integration is taking place. On the other hand, and within the context of climate change, coastal cities will be the most affected, both by the potential rise in sea level and by the increasingly continuous and greater extreme events. Integrated Space Planning is postulated as the most effective tool to carry out adequate territorial and urban planning of our coastal cities, as well as to analyse the influence and possible corrective measures to apply against the effects produced by climate change.

The critical systems, which the failure and malfunction may result in human, environment and financial severe damages, are essential components in various sectors and particularly in energy domains. Although unwished, integration error problems in supervision of critical systems occurs, incurring significant expenses because of operator’s subjective analysis and on hardware topology failures. In this work, a malleable model design approach is proposed to formulate and solve the integration error problem in the critical systems supervision in terms of reliability. A real Hybrid Power Plant (HPP) case is considered as a requirement for a study case with simulated data. A method framework with informal approach (C4 diagram) and formal approach (Hierarchical Coloured Petri Nets) in radial spectrum is applied to the HPP supervision design. Using formal methods, a formulation and solution to this problem through structured, scalable and compact mathematical representations are possible. This malleable model intends to guarantee functional correctness and then reliability of the plant supervision system based on system software architecture. Outcomes suggest corroboration that the malleable model is appropriate for energy domain, and can be used for other types of critical systems, bringing all the benefits of this methodology to the context in which it will be applied.

Discrete, logic-based models are increasingly used to describe biological mechanisms. Initially introduced to study gene regulation, these models evolved to cover various molecular mechanisms, such as signalling, transcription factor cooperativity, and even metabolic processes. The abstract nature and amenability of discrete models to robust mathematical analyses make them appropriate for addressing a wide range of complex biological problems. Recent technological breakthroughs have generated a wealth of high throughput data. Novel, literature-based representations of biological processes and emerging algorithms offer new opportunities for model construction. Here, we review up-to-date efforts to address challenging biological questions by incorporating omic data into logic-based models, and discuss critical difficulties in constructing and analysing integrative, large-scale, logic-based models of biological mechanisms.

Modern electronic textiles are moving towards flexible wearable textiles, so-called e-textiles that have micro-electronic elements embedded onto the textile fabric that can be used for varied classes of functionalities. There are different methods of integrating rigid microelectronic components into/onto textiles for the development of smart textiles, which include, but are not limited to, physical, mechanical and chemical approaches. The integration systems must satisfy being flexible, lightweight, stretchable and washable to offer a superior usability, comfortability and non-intrusiveness. Furthermore, the resulting wearable garment needs to be breathable. In this review work, three levels of integration of the microelectronics into/onto the textile structures are discussed, the textile-adapted, the textile-integrated, and the textile-based integration. The textile-integrated and the textile- adapted e-textiles have failed to efficiently meet being flexible and washable. To overcome the above problems, researchers studied the integration of microelectronics into/onto textile at fiber or yarn level applying various mechanisms. Hence, a new method of integration, textile-based, has risen to the challenge due to the flexibility and washability advantages of the ultimate product. In general, the aim of this review is to provide a complete overview of the different interconnection methods of electronic components into/onto textile substrate.

The incorporation of renewable energy into power systems poses serious challenges to the transmission and distribution power system operators (TSOs and DSOs). To fully leverage these resources there is a need for a new market design with improved coordination between TSOs and DSOs. In this paper we propose two coordination schemes between TSOs and DSOs: one centralised and another decentralised that facilitate the integration of distributed based generation; minimise operational cost; relieve congestion; and promote a sustainable system. To this end, we approximate the power equations with linearised equations so that the resulting optimal power flows (OPFs) in both the TSO and DSO become convex optimisation problems. In the resulting decentralised scheme, the TSO and DSO collaborate to optimally allocate all resources in the system. In particular, we propose an iterative bi-level optimisation technique where the upper level is the TSO that solves its own OPF and determines the locational marginal prices at substations. We demonstrate numerically that the algorithm converges to a near optimal solution. We study the interaction of TSOs and DSOs and the existence of any conflicting objectives with the centralised scheme. More specifically, we approximate the Pareto front of the multi-objective optimal power flow problem where the entire system, i.e., transmission and distribution systems, is modelled. The proposed ideas are illustrated through a five bus transmission system connected with distribution systems, represented by the IEEE 33 and 69 bus feeders.

Research abounds in the literature on kinetic analyses using thermogravimetric (TG) runs. Many of these studies use approximations of integral or derivative forms of the kinetic law and all of them use programmed temperature, not the actual temperature measured by thermocouples close to the sample. In addition, it is common to conduct a single run in order to perform the calculation. Nevertheless, many authors consider that numerical methods should be used to analyse the kinetics of decomposition. In such cases, the actual temperature is used and, generally, several runs are fitted using the same kinetic parameters, giving robustness to the results. In the present work, a numerical integration procedure was discussed and applied to different examples. We focused on materials presenting a single decomposition curve as well as other materials with more complex processes. Different examples were explored, and the methodology was applied to a number of wastes such as coffee husks, polystyrene and polyethylene.

Ghana Tamale's current waste management system is overwhelmed by the growing waste crisis, necessitating the exploration of Waste-to-Energy technologies as an innovative solution. This study explores challenges and opportunities for integrating Waste-to-Energy (WtE) technologies into Tamale's existing waste management system. Qualitative research identified policy hurdles, financial constraints, social concerns, and institutional weaknesses as key barriers. Conversely, stakeholder collaboration, public education, and capacity building emerged as some success fac-tors. A proposed implementation plan emphasizes feasibility studies, public engagement, pub-lic-private partnerships (PPPs), and technology selection based on waste composition. Addition-ally, a novel framework for WtE integration within a broader Integrated Solid Waste Manage-ment (ISWM) system is presented. This framework incorporates waste sorting, recycling, WtE alternatives, and responsible management of residuals. Validation by key stakeholders con-firmed the framework's potential to improve waste management in Tamale. By overcoming identified challenges and implementing the proposed framework, Tamale can achieve environ-mental sustainability, energy generation, and progress towards UN SDGs 7, 11, and 12. This re-search offers valuable insights for policymakers and paves the way for a cleaner and more sus-tainable future for Tamale, potentially serving as a model for other developing cities.

This study explores into a comprehensive examination of an optical cavity system that integrates Raman and Yb-doped gain media, with a focus on understanding their interactions. The research implies a characterization of each gain medium within the cavity while subjecting them to diverse co-pumping conditions with the other. When the Raman-lasing cavity is co-pumped by exciting the Yb-doped section, the resulting composite laser exhibits significant threshold reductions and there is an optimal co-pumping regime that enhances energy transfer from pump to Stokes. As for the complementary cavity, where the Yb-doped gain is influenced by the co-pumped Raman gain, at moderate pump powers a light-controlling-light behavior phenomenon arises. Within this regime, the 1064-nm signal suppresses the Yb-generated 1115-nm signal, suggesting potential applications in intracavity optical modulation. For higher pump levels, a cooperative effect emerges whereby both lasers mutually enhance each other. Minor variations in the primary 974-nm pump power, even by just a few milliwatts, result in significant capabilities for switching or modulating the Stokes signal. Under these conditions of mutual enhancement, the hybrid optical system validates notable improvements regarding energy transfer efficiency and threshold reduction. This research provides valuable insights into the intricate dynamics of optical cavity systems and reveals promising avenues for applications in advanced optical modulation technologies.

In the information age today, data are getting more and more important. While other industries achieve tangible improvement by applying cutting edge information technology, the construction industry is still far from being enough. Cost, schedule, and performance control are three major functions in the project execution phase. Along with their individual importance, cost-schedule integration has been a significant challenge over the past five decades in the construction industry. Although a lot of efforts have been put into this development, there is no method used in construction practice. The purpose of this study is to propose a new method to integrate cost and schedule data using big data technology. The proposed algorithm is designed to provide data integrity and flexibility in the integration process, considerable time reduction on building and changing database, and practical use in a construction site. It is expected that the proposed method can transform the current way that field engineers regard information management as one of the troublesome tasks in a data-friendly way.

With the outbreak of the COVID-19 disease, the research community is producing unprecedented efforts dedicated to better understand and mitigate the affects of the pandemic. In this context, we review the data integration efforts required for accessing and searching genome sequences and metadata of SARS-CoV2, the virus responsible for the COVID-19 disease, which have been deposited into the most important repositories of viral sequences. Organizations that were already present in the virus domain are now dedicating special interest to the emergence of COVID-19 pandemics, by emphasizing specific SARS-CoV2 data and services. At the same time, novel organizations and resources were born in this critical period to serve specifically the purposes of COVID-19 mitigation, while setting the research ground for contrasting possible future pandemics. Accessibility and integration of viral sequence data, possibly in conjunction with the human host genotype and clinical data, are paramount to better understand the COVID-19 disease and mitigate its effects.

The dorsal column nuclei complex (DCN-complex) includes the dorsal column nuclei (DCN, referring to the gracile and cuneate nuclei collectively), external cuneate, X, and Z nuclei, and the median accessory nucleus. The DCN are organised by both somatotopy and modality, and have a diverse range of afferent inputs and projection targets. The functional organisation and connectivity of the DCN implicate them in a variety of sensorimotor functions, beyond their commonly accepted role in processing and transmitting somatosensory information to the thalamus, yet this is largely underappreciated in the literature. To consolidate insights into their sensorimotor functions, this review examines the morphology, organisation, and connectivity of the DCN and their associated nuclei. First, we briefly discuss the receptors, afferent fibres, and pathways involved in conveying tactile and proprioceptive information to the DCN. Next, we review the modality and somatotopic arrangements of the remaining constituents of the DCN-complex. Finally, we examine and discuss the functional implications of the myriad of DCN-complex projection targets throughout the diencephalon, midbrain, and hindbrain, in addition to their modulatory inputs from the cortex. The organisation and connectivity of the DCN-complex suggest that these nuclei should be considered a complex integration and distribution hub for sensorimotor information.

This article aims to solve the problem of robust supervision of a reverse osmosis desalination system (RO-DS) with two models, external model and bond graph model. The structure of an industrial system from the point of view of the external model operates according to several modes of operation (degraded and normal). For this external model, we cannot locate the faults since we are talking about a global operation of the system. The possible solution for the development of research was to use the multidisciplinary model called bond graph. This model by its graphic nature and using a unified language makes it possible to model the industrial system element by element from where it helps the user not only to detect the faults but also to locate them when they appear in the system. The results suggest that the use of the bond graph model for alarm 02 is a reverse osmosis error (RO1); these phenomena are readable on the bond graph model and can be quantified by equations. The equation of the model of this reverse osmosis (RO1) is found in the residual equations (r5, r6 and r7), so that these residues will be sensitive to this rupture. The possible solution during research development was to use the bond graph model to supplement information with physical knowledge and to locate faults. This article also describes the operating safety (by minimizing false alarms and non-detections as well as delays in fault detection) of the desalination system by using the bond graph model described in Linear Fractional Transformation (LFT) form for enable it to manage the robust supervision of a desalination system. An approach based on (LFT-BG) is developed to monitor tank leakage (Cu) and reverse osmosis (RO1 and RO2) faults or valve level (V1 and V2) closures and membrane clogging reverse osmosis (Rm1 and Rm2) that can occur in the reverse osmosis desalination system (RO-DS).

The Bayes filters, such as Kalman and particle filters, have been used in sensor fusion to integrate two sources of information and obtain the best estimate of the unknowns. Efficient integration of multiple sensors requires deep knowledge of their error sources and it is not trivial for complicated sensors, such as Inertial Measurement Unit (IMU). Therefore, IMU error modelling and efficient integration of IMU and Global Navigation Satellite System (GNSS) observations has remained a challenge. In this paper, we develop deep Kalman filter to model and remove IMU errors and consequently, improve the accuracy of IMU positioning. In other words, we add modelling step to the prediction and update steps of Kalman filter and the IMU error model is learned during integration. Therefore, our deep Kalman filter outperforms Kalman filter and reaches higher accuracy.

The Genotype-Phenotype Working Group was established in November 2021 as part of the AgBioData Consortium (https://www.agbiodata.org) with the goal of identifying current challenges in annotating and integrating large-scale genotype and phenotype data. Over the course of the year, the members of this working group identified different types of data sets, explored experimental platforms and methods for data generation, and examined how these data are annotated including the metadata requirements. We conducted a thorough review of publicly funded repositories for raw and processed data for each data type. We also examined several secondary databases and knowledgebases that enable the integration of heterogeneous data types in the context of the Genome Browser, Pathway Networks and tissue-specific gene expression. The review revealed a need for additional infrastructural support, standards, and tools to connect Genotype to Phenotype data and enhance data interoperability for knowledge synthesis and to foster translational research.

In today's complex and rapidly changing world, integrating values, critical thinking, and moral reasoning in language and literature education is crucial for equipping students with the skills to navigate multifaceted ethical dilemmas and become responsible global citizens. This article highlights the connection between language, literature, critical thinking, moral reasoning, and values integration in education. Through language and literature, teachers can incorporate values education in their classroom, which can benefit not only individual students but also society as a whole. Theoretical frameworks such as character education, moral education, and values education provide the basis for this approach. The researcher recommends strategies for incorporating values integration in language and literature curricula, including the use of literary texts that promote critical thinking and moral reasoning skills. The limitations of this approach, including the challenges in assessing the effectiveness of values integration and potential resistance from some stakeholders, are also discussed. Ultimately, this article aims to call on educators to take a proactive role in promoting values integration in language and literature education, guided by the principles of Jesus Christ and the belief that education is not only about acquiring knowledge but developing character as well. Moreover, this concept has a significant and lasting impact on students' overall development that highlights the importance of values and moral reasoning needed to live a better life.

The rapid development of information and communication technologies has led to the use of new and digital technologies in education which involves combinations of text, graphics, audio, video, animations and other eLearning resources such as authoring tools, Learning Management System (LMS), Mobile learning and others. Arguably, using LMS leaves much to be desired. The inherent problem here is that the future of extensive adoption of ICT via LMS to enhance and promote classroom interaction in Open and Distance Learning (ODL) is bleak. This is worrisome given that the country is lagging far behind in the innovative use of this web 2.0 technology to impart knowledge. Further, the low-level application of LMS in instruction connotes the loss of inherent advantages in its adoption. Also, the online setting which makes students less nervous and interactive, sharing of ideas and viewpoints; and a host of other benefit will be lost. While evidence has shown that LMS is not a new phenomenon, the use of LMS in ODL is still at its infancy, particularly in Nigeria. Research in this area is rare. A quick search on prominent research databases could testify that. It is on this thrust that this study investigates University of Ibadan undergraduate students’ perceived roles and readiness towards integration of learning management system into teaching and learning.

The world is progressing towards a more advanced society where end-consumers have access to local renewable-based generation and advanced forms of information and technology. Hence, it is in a current state of transition between the traditional approach to power generation and distribution, where end-consumers of electricity have typically been inactive in their involvement with energy markets and a new approach that integrates their active participation. This new approach includes the use of distributed energy resources (DER) such as renewable-based generations and demand response (DR), which are being rapidly adopted by end-consumers, where incentives are strong. This paper presents the role of DR aggregator to effectively integrate DER technologies as a new source of energy capacity, into the electricity networks using information communication technology and industry knowledge. This framework based on DR aggregators will facilitate renewable energy integration and customer engagement in electricity market efficiently. To this aim, advantages and disadvantages of DR aggregators are discussed in this paper from political, economic, social and technological (PEST) point of views. Based on this analysis, a strengths, weaknesses, opportunities, and threats (SWOT) analysis for a typical DR aggregator is presented.

As technology advances, people are increasingly adopting IoT (Internet of Things) devices in smart cities. These devices are equipped with sensors that are connected everywhere, from energy infrastructure and transportation to telecommunications, health and human services, waste management, public safety, and more. People want to access sensor data anytime and everywhere to make better decisions and improve their lives. To achieve this, a sensor integration model has been developed where multiple sensors are integrated under one gateway to manage and share sensor data. However, effective sharing of sensor data requires data security, privacy, confidentiality, fairness, effective architectural design, and low communication and computation costs. These issues need to be addressed in the sensor integration model in smart cities. Existing storage models face challenges in managing sensor data effectively. To overcome these issues and hurdles, a data storage framework leveraging blockchain technology has been proposed within the sensor integration model. This framework ensures data security, privacy, confidentiality, and a fair and transparent financial model, all while minimizing communication and computation costs.

The energy transition is a challenge that affects all sectors, from transport to civil structures and industry. In the industrial sector, the greatest need is the decarbonisation of energy-intensive in-dustries, such as producers of iron and steel, aluminum, cement, petrochemicals, paper, and more. The steel industry, in particular, is a hard-to-abate high-emissivity industry that, due to chemical processes and high thermal demands (often above 500 °C), contributed to 7.4% of global CO2 emissions in 2021. This paper explores the potential applications of hydrogen in these hard-to-abate sectors, highlighting its versatility and significance in decarbonization efforts, especially as a me-dium to facilitate the transition to green electric energy uses. It provides an overview of hydrogen production methods, emphasizing the importance of sustainable and green hydrogen production. It reviews hydrogen production methods, storage, and potential in blended combustion. In the final part of the article, some considerations are introduced on the possible role of hydrogen in the steel sector (both as a supplementary fuel and as a reducing agent in innovative processes), showing that while there is potential for its inclusion as an element for decarbonization, it is necessary to carefully evaluate the energy balances of the various processes and the methods of hydrogen production, in order to avoid achieving only marginal effects.

Driven by environmental sustainability concerns, the integration of biobased components in curtain wall systems is gaining traction in both research and the construction market. This paper explores the development and validation of a bio-based façade system within the Basajaun H2020 project. The project aimed to demonstrate the feasibility of introducing environmentally friendly bio-based components into the mature curtain wall façade industry. The paper focuses on identifying technological solutions for replacing key components such as profiles, insulation, and the tightness system with bio-based and less environmental impact alternatives presenting the results achieved in the façade system design of the Basajaun project funded by European Union. These solutions aimed at creating a bio-composite-based curtain wall façade that adheres to current building envelope standards and normative; to implement diverse façade typologies for vision panels, opaque sections, and integrated windows; to engineer the prefabrication process for industrialization, enabling wider market replication and simplified transport and installation. The results demonstrate that the Basajaun façade successfully integrates selected components and meets the performance requirements set by regulations. However, questions remain regarding the workability of bio-based profiles as a commercially viable, ready-to-market solution that can replace traditional aluminum profiles in the curtain wall façade industry.

This study investigates the pivotal areas where Artificial Intelligence (AI) integration in healthcare warrants further exploration, leveraging insights from Boston Specialists, a forefront healthcare provider in AI adoption. Employing a qualitative case study approach, enriched by in-depth interviews and comprehensive literature reviews, we identify three main domains for potential AI expansion: scheduling efficiency, clinical documentation, and AI-driven medical research. Our results underscore the substantial enhancements AI brings to operational workflows and patient care, notably through improved scheduling systems, accuracy in medical documentation, and the facilitation of data-driven research methodologies. These findings suggest a critical need for healthcare institutions to further invest in AI technologies, focusing on these key areas to harness AI's full potential in personalizing care, optimizing efficiency, and advancing medical knowledge. The study concludes with a call for continued investigation into AI's integration within healthcare settings, emphasizing the importance of a supportive organizational infrastructure, ethical considerations, and data security in realizing AI's transformative impact on healthcare delivery and patient outcomes.

Through the refinement of approaches to applying visual augmentation to virtual environments, the possibilities of utilising this process in robotics continues to be explored. However these endeavours have only yielded a collaborative relationship between the two technologies, where the augmented reality (AR) component is separate from the robot functionality. Regarding telepresence robots, research has shown that their perceived usefulness wanes in comparison to that of video conferencing tools as they do not offer a level of immersion and modified visual experience to justify their use. Therefore this paper contributes a novel virtually augmented robot (VAR) model that embeds AR functionality into telepresence, through the use of augmentation and facial recognition sub-models and algorithms. Experimental results show that using pulse width modulation (PWM), duty cycles, digital signals and accelerometer angles provides an approach for stabilising robot motion and the transference of human to robot head movement. The results also show the benefit of having a robot model with intrinsic AR functionality, as it offers a greater level of immersion and visual control of an environment.

As urbanization continues to accelerate, the concept of smart buildings has transitioned from a futuristic vision to an integral component of modern cities. These buildings, often seen as the building blocks of smart cities, are increasingly relying on cutting-edge technologies like 5G and cloud computing to reach unprecedented levels of energy efficiency, sustainability, and occupant comfort. This paper offers a comprehensive exploration into the marriage of smart building technologies with 5G and cloud computing. It scrutinizes the individual and combined impacts of these technologies, presents various case studies showcasing real-world applications, and anticipates future trends. Moreover, it delves into technical challenges, policy implications, and offers concrete recommendations for stakeholders.

Labelling techniques such as electron paramagnetic resonance spectroscopy and single-molecule fluorescence resonance energy transfer, allow access to distances in the range of tens of angstroms, corresponding to the size of proteins and small to medium-sized protein complexes. Such measurements do not require long-range ordering and are therefore applicable to systems with partial disorder. Data from spin-label-based measurements can be processed into distance distributions that provide information about the extent of such disorder. Using such information in modelling presents several challenges, including a small number of restraints, the influence of the label itself on the measured distance and distribution width, and balancing the fitting quality of the long-range restraints with the fitting quality of other restraint subsets. Starting with general considerations about integrative and hybrid structural modelling, this review provides an overview of recent approaches to these problems and identifies where further progress is needed.

Integrated Kerr micro-combs, a powerful source of many wavelengths for photonic RF and microwave signal processing, are particularly useful for transversal filter systems. They have many advantages including a compact footprint, high versatility, large numbers of wavelengths, and wide bandwidths. We review recent progress on photonic RF and microwave high bandwidth temporal signal processing based on Kerr micro-combs with spacings from 49-200GHz. We cover integral and fractional Hilbert transforms, differentiators as well as integrators. The potential of optical micro-combs for RF photonic applications in functionality and ability to realize integrated solutions is also discussed.

We present a review of the current state of the field for a rapidly evolving group of technologies related to solar energy harvesting in built environments. In particular, we focus on recent achievements in enabling the widespread distributed generation of electric energy assisted by energy capture in semi-transparent or even optically clear glazing systems and building wall areas. Whilst concentrating on the cutting-edge recent results achieved in the integration of traditional photovoltaic device types into novel concentrator-type windows and glazings, we compare the main performance characteristics reported with these achievable using more conventional (opaque or semi-transparent) solar cell technologies. A critical overview of the current status and future application potential of multiple existing and emergent energy harvesting technologies for building integration is provided.

This qualitative investigation delves into the intricate interplay of cultural factors within supply chain integration, aiming to elucidate how diverse cultural dimensions shape communication dynamics, decision-making processes, and collaborative efforts among global supply chain practitioners. Employing a phenomenological approach, the study explores the lived experiences and subjective perceptions of supply chain managers and professionals, providing nuanced insights into the profound impact of national culture, organizational culture, digital technologies, and sustainability considerations on supply chain operations. Key findings highlight the significant influence of national culture, as conceptualized by Hofstede's cultural dimensions, on supply chain interactions. These dimensions—such as power distance, individualism versus collectivism, uncertainty avoidance, and masculinity versus femininity—play crucial roles in shaping how individuals perceive authority, manage risks, negotiate agreements, and engage in collaborative practices across diverse cultural contexts. Cultural norms and values deeply influence both intra-organizational dynamics and inter-organizational relationships within global supply chains. Organizational culture emerges as a pivotal determinant of supply chain integration success. Cultures characterized by transparency, trust, inclusivity, and a commitment to continuous improvement create environments conducive to effective cross-border collaboration. Conversely, organizations with conflicting or ambiguous cultural norms face challenges in aligning goals, fostering mutual understanding, and maintaining open communication channels with international partners. The study underscores the transformative role of digital technologies in enhancing supply chain management practices. Technologies such as blockchain, artificial intelligence, and the Internet of Things improve supply chain visibility, optimize operations, and enhance decision-making processes, strengthening resilience against disruptions. The adoption and integration of these technologies depend on organizational readiness, technological capabilities, and cultural acceptance within supply chain networks. Cultural factors influence the adoption pace, implementation strategies, and utilization patterns of digital technologies, emphasizing the need for strategic alignment between technological investments and cultural norms to maximize their potential benefits. Furthermore, sustainability considerations are critical in shaping cultural values and priorities within supply chain networks. Organizations increasingly recognize the importance of environmental sustainability, ethical sourcing practices, and corporate social responsibility in shaping their reputations, stakeholder relationships, and long-term business goals. Cultural factors significantly influence organizations' approaches to sustainability, guiding their strategic decisions and operational practices.