The COVID-19 pandemic over the past years has shown a great need for rapid, low-cost and on-site detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). In this paper, an aptamer-based colloidal gold nanoparticle lateral flow test strip was well developed to realize the visual detection of wild type SARS-CoV-2 spike protein (SP) and multiple variants. Under the optimal reaction conditions, a low detection limit of SARS-CoV-2 S protein of 0.68 nM was acquired, and the actual detection recovery was 83.3% to 108.8% for real world samples. This suggests a potential tool for the prompt detection of SARS-CoV-2 with good sensitivity and accuracy, and a new method for the development of alternative antibody test strips for the detection of other viral targets.

In various domains such as energy, manufacturing, and maritime, cyber-physical systems (CPS) have seen increased interest. Both academia and industry have focused on the cybersecurity aspects of such systems. The assessment of cyber risks in CPS is a popular research area with many existing approaches that aim to suggest relevant methods and practices. However, few works have addressed the extensive and objective evaluation of the proposed approaches. In this paper, a standard-aligned evaluation methodology is presented and empirically conducted to evaluate a newly proposed cyber risk assessment approach for CPS. The approach, which is called FMECA-ATT&CK is based on Failure Mode, Effects & Criticality Analysis (FMECA) risk assessment process and enriched with the semantics and encoded knowledge in the Adversarial Tactics, Techniques, and Common Knowledge framework (ATT&CK). Several experts were involved in conducting two risk assessment processes, FMECA-ATT\&CK and Bow-Tie, against two use cases in different application domains, particularly an autonomous passenger ship (APS) as a maritime use case and a digital substation as an energy use case. This allows for the evaluation of the approach based on a group of characteristics, namely, applicability, feasibility, accuracy, comprehensiveness, adaptability, scalability, and usability. The results highlight the positive utility of FMECA-ATT&CK in model-based, design-level, and component-level cyber risk assessment of CPS with several identified directions for improvements. Moreover, the standard-aligned evaluation method and the evaluation characteristics have been demonstrated as enablers for the thorough evaluation of cyber risk assessment methods.

We present an updated design process for adapting and integrating existing cyber risk assessment approaches for impact assessment for the risk from IoT to the digital economy. The new design process includes a set of changes to the original standards (e.g. NIST) that are adapted for the IoT cyber risk in this paper. This paper also presents a new framework for impact assessment of IoT cyber risk, specific for the digital economy.

Financial technologies, stemming from the application of artificial intelligence to big data in finance, are continuously expanding, across different markets and financial services. While financial technologies bring many opportunities, such as reduced costs and extended inclusion, they also bring risks, among which cyber risks, which are constantly increasing and are difficult to measure. Among the difficulties in measurement lies the existence of interdependence among different cyber risks. The study of interdependence and possible contagion channels between cyber attacks to different institutions and economic sectors is indeed increasingly important to ensure economic and financial sustainability. Against this backdrop, this paper proposes a multivariate model for count time series of cyber risk events, in which the time-varying intensity parameter determining the probability that a cyber attack occurs evolves according to general autoregressive score models, taking both time and sectorial dependence into account. The model is particularly suitable for studying how the behaviors of different markets or sectors are interconnected and it constitutes a new approach to the multivariate analysis of count time series of cyber loss events.

Artificial intelligence (AI) systems of autonomous systems such as drones, robots and self-driving cars may consume up to 50% of total power available onboard, thereby limiting the vehicle’s range of functions and considerably reducing the distance the vehicle can travel on a single charge. Next-generation onboard AI systems need an even higher power since they collect and process even larger amounts of data in real time. This problem cannot be solved using the traditional computing devices since they become more and more power-consuming. In this review article, we discuss the perspectives of development of onboard neuromorphic computers that mimic the operation of a biological brain using nonlinear-dynamical properties of natural physical environments surrounding autonomous vehicles. Previous research also demonstrated that quantum neuromorphic processors (QNPs) can conduct computations with the efficiency of a standard computer while consuming less than 1% of the onboard battery power. Since QNPs is a semi-classical technology, their technical simplicity and low, compared with quantum computers, cost make them ideally suitable for application in autonomous AI system. Providing a perspective view on the future progress in unconventional physical reservoir computing and surveying the outcomes of more than 200 interdisciplinary research works, this article will be of interest to a broad readership, including both students and experts in the fields of physics, engineering, quantum technologies and computing.

The article presents the author’s works in the field of modifications and modeling of the PQC CSIDH algorithm on non-cyclic supersingular Edwards curves and its predecessor CRS scheme on ordinary non-cyclic Edwards curves are reviewed. Lower estimates of the computational speed gains of the modified algorithms over the original ones are obtained. The most significant results were obtained by choosing classes of non-cyclic Edwards curves connected as quadratic twist pairs instead of cyclic complete Edwards curves, as well as the method of algorithm randomization as an alternative to “constant time CSIDH.” It is shown that in the CSIDH and CSIKE algorithms, there are two independent cryptosystems with the possibility of parallel computation, eliminating the threat of side-channel attacks. For the CRS scheme, there are four such cryptosystems. Integral lower bound estimates of the performance gain of the modified CSIDH algorithm are obtained at 1.5 ∙ 29, and for the CRS scheme are 3 ∙ 29.

This paper is focused on mapping the current evolution of Internet of Things (IoT) and its associated cyber risks for the Industry 4.0 (I4.0) sector. We report the results of a qualitative empirical study that correlates academic literature with 14 - I4.0 frameworks and initiatives. We apply the grounded theory approach to synthesise the findings from our literature review, to compare the cyber security frameworks and cyber security quantitative impact assessment models, with the world leading I4.0 technological trends. From the findings, we build a new impact assessment model of IoT cyber risk in Industry 4.0. We therefore advance the efforts of integrating standards and governance into Industry 4.0 and offer a better understanding of economics impact assessment models for I4.0.

Private Set Intersection (PSI) is a cryptographic method in secure multi-party computation that allows entities to identify common elements in their datasets without revealing their private data. Traditional approaches assume similar-sized datasets and equal computational power, overlooking practical imbalances. In real-world applications, dataset sizes and computational capacities often vary, particularly in the Internet of Things and mobile scenarios where device limitations restrict computational types. Traditional PSI protocols are inefficient here, as computational and communication complexities correlate with the size of larger datasets. Thus, adapting PSI protocols to these imbalances is crucial. This paper explores unbalanced PSI scenarios where one party (the receiver) has a relatively small dataset and limited computational power, while the other party (the sender) has a large amount of data and strong computational capabilities. It introduces three innovative solutions for unbalanced PSI: unbalanced PSI protocol based on Cuckoo filters, unbalanced PSI protocol based on single cloud assistance, and unbalanced PSI protocol based on dual cloud assistance, each addressing the shortcomings of the previous solution. These protocols primarily optimize database computational load, storage capacity, protocol execution time, and security. Depending on performance and security needs, different protocols can be employed for applications such as private contact discovery.

Abstract: Integration of Medical Cyber Physical Systems (MCPS) and Internet-of-Medical Devices (IoMT) with conventional hospital networks have facilitated easy and speedy data collection, vertical and horizontal connectedness and collaborations among healthcare providers. Federated identity management (FIM) provides a solution towards the identity management challenge arising from this integration of millions of MCPSs to get personalized care and frictionless experiences for the patients, doctors, and employees. FIM protocols such as OAuth, Security Assertion Markup Language (SAML) are highly susceptible to cyber attacks like theft of barrier token, replay attack, message insertion, and Man-in-Middle attacks. IoMT devices have vulnerabilities in their firmware, operating systems, data encryption, data at store and data transmission. Combined vulnerabilities of FIM framework and IoMT devices creates major cyber risks for the current digital healthcare system. Therefore, a comprehensive and evidenced based cyber risk assessment is an urgent need for a cyber-safe digital health care system that can avoid frequent life threatening situations. This paper proposes a comprehensive and evidenced based cyber risk assessment approach for FIM and IoMT based collaborative digital healthcare systems. The novelty of the proposed approach is that it considers three dimensional vulnerabilities arising from existing IT communication protocols and infrastructure, IoMT and MCPS medical devices, protocols of FIM and their combined impact on hospitals and provides corresponding recommendations of security controls. The proposed approaches combine two industry standards including Cyber Resilience Review (CRR) asset management, NIST SP 800-30 to take advantage of both approaches. We have used a large number of IoMT and MCPS devices from multiple providers for threat modelling and produced evidence based cyber-risks using attack trees and detailed attack sequence diagrams to validate proposed approaches. The corresponding recommendation of security controls will support healthcare professionals and providers significantly for improving both the patient and medical device safety management within the FIM enabled healthcare ecosystem.

In this paper we present an understanding of cyber risks in the Internet of Things (IoT), we explain why it is important to understand what IoT cyber risks are and how we can use risk assessment and risk management approaches to deal with these challenges. We introduce the most effective ways of doing Risk assessment and Risk Management of IoT risk. As part of our research, we also developed methodologies to assess and manage risk in this emerging environment. This paper will take you through our research and we will explain: what we mean by the IoT; what we mean by risk and risk in the IoT; why risk assessment and risk management are important; the IoT risk management for incident response and recovery; what open questions on IoT risk assessment and risk management remain.

Large datasets play a crucial role in the progression of surgical robotics, facilitating advancements in the fields of surgical task recognition and automation. Moreover, public datasets enable the comparative analysis of various algorithms and methodologies, thereby assessing their effectiveness and performance. The ROSMA (Robotics Surgical Maneuvers) dataset provides 206 trials of common surgical training tasks performed with the da Vinci Research Kit (dVRK). In this work, we extend ROSMA dataset with two annotated subsets: ROSMAT24, which contains bounding box annotations for instrument detection, and ROSMAG40, which contains high and low level gesture annotations. We propose an annotation method that provides independent labels for the right-handed tool and the left-handed tool. For instrument identification, we validate our proposal with a YOLOv4 model in two experimental scenarios. We demonstrate the generalization capabilities of the network to detect instruments in unseen scenarios. For gesture segmentation, we propose two label categories: high-level annotations that describe gestures at a maneuvers level, and low-level annotations that describe gestures at a fine-grain level. To validate this proposal, we have designed a recurrent neural network based on a bidirectional long-short term memory layer. We present results for four cross-validation experimental setups, reaching up to a 77.35% mAP.

Autism spectrum disorder (ASD) is a neurodevelopmental disorder characterized by impairments in social interaction and communication, anxiety, hyperactivity, and restricted interest for specific subjects. In addition to the genetic factors, multiple environmental factors have been related to the development of ASD. Animal models can serve as crucial tools for understanding the complexity of ASD and identifying potential therapeutic strategies. In this study, a chemical model of ASD has been developed in zebrafish by exposing embryos to valproic acid (VPA) from 4 to 48 hours post-fertilization. After the exposure, embryos were transferred to fish water and the effects on behavior and neurotransmitters profile were analyzed at both larval and adult stages. Larvae from VPA-treated embryos showed hyperactivity and decreased visual and vibrational escape responses, as well as an altered neurotransmitters profile, with increased glutamate and decreased acetylcholine and norepinephrine levels. Adults from VPA-treated embryos exhibited impaired social behavior characterized by larger shoal sizes and a decreased interest for their conspecifics. Neurotransmitter analysis revealed a significant decrease in dopamine and GABA levels in the brain. These results support the interest of this model in the study of ASD.

Private Set Intersection Cardinality(PSI-CA) is a cryptographic method in secure multi-party computation that allows entities to identify cardinality of the intersection without revealing their private data.Traditional approaches assume similar-sized datasets and equal computational power, overlooking practical imbalances.In real-world applications, dataset sizes and computational capacities often vary, particularly in the Internet of Things and mobile scenarios where device limitations restrict computational types. Traditional PSI-CA protocols are inefficient here, as computational and communication complexities correlate with the size of larger datasets. Thus, adapting PSI-CA protocols to these imbalances is crucial.This paper explores unbalanced scenarios where one party (the receiver) has a relatively small dataset and limited computational power, while the other party (the sender) has a large amount of data and strong computational capabilities.This paper, based on the concept of commutative encryption, introduces Cuckoo filter, cloud computing technology, homomorphic encryption, among other technologies, to construct three novel solutions for unbalanced Private Set Intersection Cardinality (PSI-CA): an unbalanced PSI-CA protocol based on Cuckoo filter, an unbalanced PSI-CA protocol based on single cloud assistance, and an unbalanced PSI-CA protocol based on dual cloud assistance. Depending on performance and security requirements, different protocols can be employed for various applications.

This study is based on the clamor of fish farmers for a cheaper fish feed alternative to current commercial feeds. At present, 70-80% of aquaculture costs come from feed cost, keeping farmers' income below their expectation. This study aimed to find alternative feeds or supplementary feeds that can perform similarly to the existing commercial feeds thereby reducing farmer expense and cutting down their cost of production and increasing their profitability. To do that, various indigenous raw materials were selected based on an earlier study which could result in a better feed alternative. The formulations for the study included four grow-out treatments mainly: control (commercial feed), taro+control (powdered Colocasia esculenta+commercial fish feed), bloodmeal (formulated fish feed based on bloodmeal), banana stem+control (chopped banana stem+commercial fish feed). A total of 12,000 fingerlings initially weighing 16 g (TL=10 cm) individually were assigned randomly to the four treatments (3000 in each cage measuring 6 x 6 m). Week zero was used for acclimation period, and fingerlings were fed with commercial fish feed. Then the first week used the treatment diets which were adjusted based on average body weight and sampled weekly (ABW=23g; TL=11 cm). The result of the study first showed significant differences between treatments on their fourth week in terms of the diet treatments (MS=0.103, df=3, F=4.12, P=0.0076) with the control and the taro+control showing no difference in terms of weight and length (TC vs CF; P=0.4524). But during the fifth week, the bloodmeal treatment showed increased weight and length for fish sampled (MS=0.109, df=3, F=4.10, P=0.0076) and provided similar weight and length as those from the taro+control and the control (TC vs CF; P=0.3721 and BM vs CF; P=0.0587). During the succeeding weeks, there were no significant differences between feed treatments from 6th weeks onwards, whether with weight [MS=0.130, df=3, F=1.14, P=0.333] or total length of the treatments [MS=0.008, df=3, F=0.40, P=0.75]. The FCR ratio showed taro (1.81) as lowest, followed by blood meal (2.09), and control (2.24) and then banana stem (2.84). In terms of weight gain, fish from the bloodmeal treatment gained the highest (236.97 g), followed by control (223.33 g), then taro (217.67 g) and banana stem (196.99 g). As a result, we find that the tested treatments such as bloodmeal formulated feed, taro+commercial feed, and banana stem+commercial feed can serve as an alternative to purely commercial fish feeds. Cost-benefit analysis showed that a better gross profit margin of 42% and cost-benefit ratio of 1.37 was observed in taro+commercial feed diet.

The recent availability of commercial platforms for behavioral analysis in zebrafish larvae based on video-tracking technologies has exponentially increased the number of studies analyzing different behaviors in this model organism to assess neurotoxicity. Among the most commonly used assays in zebrafish larvae are basal locomotor activity (BLA) and visual motor response (VMR). However, the effect of different intrinsic and extrinsic factors that can significantly alter the outcome of these assays is still not well understood. In this work we have analyzed in 143 larvae the influence of age (5-8 days post-fertilization), time of day (8:00, 10:00, 12:00, 14:00; 16:00, 18:00, and 20:00 h), and experiment (three experiments performed at different days) on BLA and VMR results (4,004 analyses for each behavior). Results from both behaviors were adjusted to a Random-Effects linear regression model using generalized least squares (GLS), including in the model the effect of the three variables, the second-way interactions between them and the three-way interaction. The results presented in this manuscript show a specific effect of all three intrinsic factors and their interactions on both behaviors, supporting the view that the most stable time period for performing these behavioral assays is from 10:00 am to 04:00 pm, with some differences depending on age of the larva and the behavioral test.

The discovery of the quantum tunnelling effect---the transmission of particles through a high potential barrier---was one of the most impressive achievements of quantum mechanics made in the 1920s. Responding to the contemporary challenges, I introduce a novel deep neural network (DNN) architecture that processes information using the effect of quantum tunnelling. I demonstrate the ability of the quantum tunnelling DNN (QT-DNN) to recognise optical illusions like a human. Hardware implementation of QT-DNN is expected to result in an inexpensive and energy-efficient neuromorphic chip suitable for applications in autonomous vehicles. The optical illusions recognition tests developed in this paper should lay foundations for cognitive benchmarking tasks for AI systems of the future, benefiting the fields of sociophysics and behavioural science.

Tegucigalpa, the capital city of Honduras, has the highest number of landslides recorded in the country. In a previous study, landslides were found to be mainly concentrated in areas with colluvium and residual soils. The present study focused on assessing the physical vulnerability of houses and the risk linked to landslides in these types of soils. As an input for this assessment, the study generated landslide risk vulnerability functions based on empirical data. The study's findings suggest that the estimated Annual Average Losses associated with landslides in this region is USD 7.26 million. Moreover, the study developed a novel approach for the spatial and temporal estimation of landslide hazard probability, which overcomes some of the limitations identified in previous landslide risk assessment studies.

The Internet-of-Things (IoT) enables enterprises to obtain profits from data but triggers data protection questions and new types of cyber risk. Cyber risk regulations for the IoT however do not exist. The IoT risk is not included in the cyber security assessment standards, hence, often not visible to cyber security experts. This is concerning, because companies integrating IoT devices and services need to perform a self-assessment of its IoT cyber security posture. The outcome of such self-assessment needs to define a current and target state, prior to creating a transformation roadmap outlining tasks to achieve the stated target state. In this article, a comparative empirical analysis is performed of multiple cyber risk assessment approaches, to define a high-level potential target state for company integrating IoT devices and/or services. Defining a high-level potential target state represent is followed by a high-level transformation roadmap, describing how company can achieve their target state, based on their current state. The transformation roadmap is used to adapt IoT risk impact assessment with a Goal-Oriented Approach and the Internet of Things Micro Mart model.

This study addresses a gap in the literature by conducting a comparative analysis of statistical and artificial intelligence techniques for predicting bankruptcy in small and medium-sized enterprises (SMEs). Using a comprehensive database of 7,104 Belgian SMEs, our findings demonstrate that intelligent techniques offer superior predictive accuracy for bankruptcy. Notably, our results indicate that a firm's position in the global value chain significantly affects prediction accuracy, with lower performance for firms operating upstream in the production process. This suggests that bankruptcy risk may spread upward along the value chain. This insight is particularly valuable for practitioners, as it highlights the importance of focusing on specific performance factors based on the type of firms they manage, advise, or collaborate with.

The rapid advancements in satellite technology have led to a significant increase in high-resolution remote sensing (RS) images, necessitating advanced processing methods. Additionally, a patent analysis revealed a significant increase in deep learning and machine learning applications in remote sensing, highlighting the growing importance of these technologies. Therefore, this paper introduces the Kolmogorov-Arnold Network (KAN) model to remote sensing, aiming to enhance efficiency and performance in RS applications. We conducted several experiments to validate KAN's applicability, starting with the EuroSAT dataset, where we combined the KAN layer with multiple pretrained CNN models. The optimal performance was achieved with ConvNeXt, leading to the development of the KonvNeXt model. KonvNeXt was evaluated on the Optimal-31, AID, and Merced datasets for validation, and it achieved accuracies of 90.59%, 94.1%, and 98.1%, respectively. The model also showed fast processing speed, with the Optimal-31 and Merced datasets completed in 107.63 seconds each, while the bigger and more complicated AID dataset took 545.91 seconds. This result is meaningful since it achieved faster speeds and comparable accuracy compared to the existing study which utilized VIT and proved KonvNeXt's applicability for remote sensing classification tasks. Furthermore, we investigated the model's interpretability by utilizing Occlusion Sensitivity and by displaying the influential regions, it validated its potential use in a variety of domains including medical imaging and weather forecasting. This paper is meaningful in that it is the first use of KAN in remote sensing classification, proving its adaptability and efficiency.

One of the major concerns in structural health management (SHM) is the early detection of a growing crack. Using this, future damage due to crack propagation can be mitigated or eliminated by implementing proper repair and maintenance. Acoustic Emission (AE) is a non-destructive testing (NDT) method with potential applications for locating and monitoring fatigue cracks. The research presented in this paper focuses on SHM using AE. A novel AE signal analysis approach was proposed in order to detect crack initiation and assess small crack lengths. Experimental investigation indicated that initiation of a crack could be identified through the statistical analysis of the resulting features of the AE signals. A probabilistic AE-based model for small fatigue crack sizing was developed and the uncertainties of the model were estimated. In addition, a probabilistic model validation approach was implemented to confirm accurate estimation of the results. The outcome of this research can be used to evaluate the integrity of structures under fatigue loading. The proposed approach can also be applied as an approach to manage health and assess prognosis of structures.

With the rapid development of intelligent transportation, Vehicle Ad hoc Networks (VANETs) is becoming increasingly important.As a critical component of intelligent transportation systems, the Conditional Privacy-Preserving Authentication (CPPA) scheme plays a significant role in ensuring drivers' privacy and security.However, current CPPA schemes still face limitations in terms of security and efficiency, with these schemes either imposing higher computational overhead for enhanced security or compromising some level of security to reduce overhead. Motivated by this challenge, we propose a CPPA scheme that strikes a better balance between efficiency and security.By leveraging the token mechanism to achieve multiple authentication and minimizing information leakage. Furthermore, our performance analysis demonstrates that our ECC-based algorithm can significantly reduce overhead, with pseudonymous generation requiring only 0.0039ms.

The United States is facing an alarming surge in cyberattacks, with data breaches rising by 72% since 2021, presenting grave national security risks. Notable incidents, including Chinese hackers attempting to access high-level government information and Iranian-linked cyber groups targeting U.S. water systems, highlight the fragility of critical infrastructure. These attacks pose dangers not only to national security but also to economic stability and public health, amplified by the rapid growth of interconnected technologies and global digitalization. In response to these escalating threats, the U.S. must take a multifaceted approach. Key strategies include strengthening cybersecurity education and workforce development, enforcing more rigorous regulatory frameworks, and enhancing preparedness through incident response and recovery planning. Additionally, increased international cooperation is essential to address state-sponsored cyber threats and foster a global framework for cybersecurity defense. As cyber threats continue to evolve, future efforts will rely on technological advancements such as artificial intelligence (AI) for real-time threat detection, the adoption of zero-trust security models, and the development of adaptive, resilient cybersecurity infrastructures. Collaboration between the public and private sectors, coupled with ongoing innovation and education, will be critical to maintaining national security and promoting economic growth in an increasingly interconnected digital landscape.

The Internet-of-Things (IoT) triggers new types of cyber risks. Therefore, the integration of new IoT devices and services requires a self-assessment of IoT cyber security posture. By security posture this article refers to the cybersecurity strength of an organisation to predict, prevent and respond to cyberthreats. At present, there is a gap in the state-of-the-art, because there are no self-assessment methods for quantifying IoT cyber risk posture. To address this gap, an empirical analysis is performed of 12 cyber risk assessment approaches. The results and the main findings from the analysis is presented as the current and a target risk state for IoT systems, followed by conclusions and recommendations on a transformation roadmap, describing how IoT systems can achieve the target state with a new goal-oriented dependency model. By target state, we refer to the cyber security target that matches the generic security requirements of an organisation. The research paper studies and adapts four alternatives for IoT risk assessment and identifies the goal-oriented dependency modelling as a dominant approach among the risk assessment models studied. The new goal-oriented dependency model in this article enables the assessment of uncontrollable risk states in complex IoT systems and can be used for a quantitative self-assessment of IoT cyber risk posture.

This comprehensive article explores Massive MIMO (M-MIMO) design and its associated concepts, focusing on the seamless integration requirements for Beyond 5G (B5G) and 6G networks. Addressing critical aspects such as RF chain reduction, pilot contamination, Cell-Free MIMO, and security considerations, the article delves into the intricacies of M-MIMO in the evolving landscape of B5G. Moreover, the emerging MIMO concepts in this article include AI-enabled M-MIMO three-dimensional beamforming, reconfigurable intelligent surfaces, visible light communication, and THz spectrum utilization. This review highlights challenges and open research issues, including Narrow Aperture Antenna Nodes, Plasmonic Antenna Arrays, Integrated Sensing with M-MIMO, and the application of Federated Learning in M-MIMO systems. By examining these cutting-edge developments, the article aims to contribute to advancing knowledge in the field and inspire future research directions in the exciting realm of B5G and 6G networks.

The conformity assessment of products or a measured value with the given standards is carried out based on the global risk of producers and consumers calculation. A product may conform to specifications but be falsely rejected as non-conforming. This is about the producer's risk. If a product doesn't meet the requirements but is falsely accepted as conforming, that poses a risk to the consumer. The conventional approach to risk assessment, which yields only a single numerical value for the global risk of producers and consumers, is naturally extended, and utilized for assessing risk in measurement models with linear regression. The outcomes of the two-dimensional extension, along a moderate scale, are the parabolas with an opening upwards. Risk surfaces were obtained through three-dimensional extension over the area limited by the moderate scale and guard band axes. Four models with different ranges of tolerance intervals were used to test this innovative method of risk assessment in linear regression. The corresponding standard measurement uncertainties are determined by applying a simplified measurement model with the use of comprehensive data on the measurement performance and by determining measurement uncertainty derived from consideration of the functional relationship obtained by linear regression analysis. Models that utilize information from linear regression analysis to determine measurement uncertainty are biased towards risks at the edges of the moderate scale. Testing the model's performances with metrics related to the confusion matrix, such as the F1 score, further substantiated this assertion. The diagnostic odds ratio has been proven to be extremely effective in identifying the curve along the guard band axis, along which the global risks of producers and consumers are at their lowest.

Soil naturally contains fluorine, but concerns arise when its levels or bioavailability are increased by human activities or specific compounds. South Korea faces challenges in regulating soil fluorine pollution despite implementing stricter total fluorine standards than many developed countries. Moreover, these regulations can be economically unfeasible because of the naturally high background levels of fluorine in the soil in Korea. This review explores the global landscape of soil fluorine management strategies and examines potential solutions that reconcile environmental protection with economic concerns. We recommend a shift towards regulating specific and hazardous fluorine compounds rather than total content, and prioritizing remediation efforts based on assessments of bioavailable fluorine. This approach may help Korea establish a more effective and sustainable strategy for managing soil fluorine pollution.

Digital technologies have changed the way supply chain operations are structured. In this article, we conduct systematic syntheses of literature on the impact of new technologies on supply chains and the related cyber risks. A taxonomic/cladistic approach is used for the evaluations of progress in the area of supply chain integration in the Industrial Internet of Things and Industry 4.0, with a specific focus on the mitigation of cyber risks. An analytical framework is presented, based on a critical assessment with respect to issues related to new types of cyber risk and the integration of supply chains with new technologies. This paper identifies a dynamic and self-adapting supply chain system supported with Artificial Intelligence and Machine Learning (AI/ML) and real-time intelligence for predictive cyber risk analytics. The system is integrated into a cognition engine that enables predictive cyber risk analytics with real-time intelligence from IoT networks at the edge. This enhances capacities and assist in the creation of a comprehensive understanding of the opportunities and threats that arise when edge computing nodes are deployed, and when AI/ML technologies are migrated to the periphery of IoT networks.

Digital technologies have changed the way supply chain operations are structured. In this article, we conduct systematic syntheses of literature on the impact of new technologies on supply chains and the related cyber risks. A taxonomic/cladistic approach is used for the evaluations of progress in the area of supply chain integration in the Industrial Internet of Things and Industry 4.0, with a specific focus on the mitigation of cyber risks. An analytical framework is presented, based on a critical assessment with respect to issues related to new types of cyber risk and the integration of supply chains with new technologies. This paper identifies a dynamic and self-adapting supply chain system supported with Artificial Intelligence and Machine Learning (AI/ML) and real-time intelligence for predictive cyber risk analytics. The system is integrated into a cognition engine that enables predictive cyber risk analytics with real-time intelligence from IoT networks at the edge. This enhances capacities and assist in the creation of a comprehensive understanding of the opportunities and threats that arise when edge computing nodes are deployed, and when AI/ML technologies are migrated to the periphery of IoT networks.

Pragmatic trials aim to assess intervention efficacy in usual patient care settings, contrasting with explanatory trials conducted under controlled conditions. In aging research, pragmatic trials are important designs for obtaining real-world evidence in elderly populations, which are often underrepresented in trials. In this review, we discuss statistical considerations from a frequentist approach for the design and analysis of pragmatic trials. When choosing the dependent variable, it is essential to use an outcome that is highly relevant to usual medical care while also providing sufficient statistical power. Besides traditionally used binary outcomes, ordinal outcomes can provide pragmatic answers with gains in statistical power. Cluster randomization requires careful consideration of sample size calculation and analysis methods, especially regarding missing data and outcome variables. Mixed effects models and generalized estimating equations (GEEs) are recommended for analysis to account for center effects, with tools available for sample size estimation. Multi-arm studies pose challenges in sample size calculation, requiring adjustment for design effects and consideration of multiple comparison correction methods. Secondary analyses are common but require caution due to the risk of reduced statistical power and false-discovery rates. Safety data collection methods should balance pragmatism and data quality. Overall, understanding statistical considerations is crucial for designing rigorous pragmatic trials that evaluate interventions in elderly populations under real-world conditions. In conclusion, this review focuses on various statistical topics of interest to those designing a pragmatic clinical trial, with consideration of aspects of relevance in the aging research field.

Background: Despite its global eradication in 1977, smallpox remains a concern owing to its potential as a biological agent, thereby prompting the ongoing development and utilization of its vaccine. Vaccination with the Vaccinia virus induces immunity against variola virus, the causative agent of smallpox; however, this immunity does not extend to viruses of different genera within the Poxviridae family. In this study, we aimed to assess the efficacy of an enzyme-linked immunosorbent assay (ELISA) method utilizing Vaccinia virus and recombinant A27L antigen for detecting antibodies against smallpox. Methods. Analysis of serum from 20 individuals pre- and post-vaccination with the CJ strain (CJ50300) revealed neutralizing antibodies, which were confirmed using the plaque reduction neutralization test (PRNT). The ELISA method, validated with a PRNT50 cut-off value of >4, exhibited a sensitivity and specificity of >95% and was particularly reactive with the inactivated virus. Furthermore, adherence to the smallpox vaccination policy revealed significant differences in Orthopoxvirus antibody levels among 300 individuals of different age groups. These findings highlight the reliability and efficacy of the ELISA method in detecting post-vaccination antibodies and contribute significantly to diagnostic methods to prepare for potential smallpox resurgence and bioterrorism threats.

The Automatic Dependent Surveillance-Broadcast (ADS-B) protocol stands as a cornerstone in modern aviation surveillance and Aircraft Traffic Control systems, integral to the NextGen project initiated by the US Department of Federal Aviation Administration (FAA) in 2005. ADS-B utilizes data links to autonomously broadcast Aircraft navigational and identification information to augment air transportation system capacity and safety. However, concerns regarding the protocol's security persist, particularly as its adoption expands. The unencrypted nature of transmitted aircraft data and the absence of robust authentication mechanisms render the protocol susceptible to exploitation by malicious actors. In this study, we comprehensively reviewed existing research in the field, identifying a crucial gap necessitating a holistic survey. Prior surveys have predominantly focused on specific aspects, such as vulnerabilities, attacks, or critiques of existing solutions. Our survey addresses this gap by thoroughly exploring the aviation system, providing readers with a nuanced understanding of ADS-B security. Utilizing a detailed SWOT analysis diagram, our paper delves into the vulnerabilities inherent in the ADS-B protocol outlines potential threats and scrutinizes various attack scenarios. We systematically categorize and analyze existing security solutions, considering cost-effectiveness, scalability, implementation complexity, and coverage against diverse attack vectors. Furthermore, we critically evaluate these solutions, elucidate ADS-B security requirements, discuss current challenges, and propose future research directions. This survey serves as a comprehensive resource for researchers and practitioners alike, shedding light on the multifaceted landscape of ADS-B security and paving the way for enhanced aviation system resilience in the face of evolving cybersecurity threats.

This paper aims to develop a hierarchical risk assessment model using the newly-developed evidential reasoning (ER) rule, which constitutes a generic conjunctive probabilistic reasoning process. In this paper, we first provide a brief introduction to the basics of the ER rule and emphasize the strengths for representing and aggregating uncertain information from multiple experts and sources. Further, we discuss the key steps of developing the hierarchical risk assessment framework systematically, including (1) formulation of risk assessment hierarchy, (2) representation of both qualitative and quantitative information, (3) elicitation of attribute weights and information reliabilities, (4) aggregation of assessment information using the ER rule and (5) quantification and ranking of risks using utility-based transformation. The proposed hierarchical risk assessment framework can potentially be implemented to various complex and uncertain systems. A case study on the fire/explosion risk assessment of marine vessels demonstrates the applicability of the proposed risk assessment model.

Occupational accidents, despite continuous safety updates, are still a scourge in the occupational and forensic spheres, constituting, among other things, the subject of a large share of litigation. Demographic data can help to understand the areas where the application of health surveillance is lacking. This meta-analysis sets out to analyze data from studies on accidents at work, focusing on the correlation between the areas in which accidents occur and whether or not personal safety equipment is used, about the different regulations in force. For the selection of the data, a systematic review was carried out according to the PRISMA guidelines, with the primary objective of identifying the trend of occupational accidents in specific geographical areas, which differ in terms of the attention paid to preventive aspects. The data we highlighted showed, regarding the type of accident, substantial differences between low-income countries and industrialized countries (stratified according to the Human Development Index) and, an overall indifference as to whether or not individual safety devices were used, revealing that, despite the continuous normative evolution in the field of safety at work, even today, the investigative data on the actual application of the regulations, during accidents at work, is underestimated and little researched.

A review of quantitative risk assessment (QRA) models of L. monocytogenes in produce was carried out, with the objective of appraising and contrasting the effectiveness of the control strategies placed along the food chains. Despite nine of the thirteen QRA models recovered focused on fresh or RTE leafy greens, none of them represented important factors or sources of contamination in the primary production, such as type of cultivation, water, fertilisers or irrigation method/practices. Cross-contamination at processing and during consumer’s handling was modelled using transfer rates, which were shown to moderately drive the final risk of listeriosis; highlighting therefore the importance of accurately representing the transfer coefficient parameters. Many QRA models coincided in the fact that temperature fluctuations at retail or temperature abuse at home were key factors contributing to increasing the risk of listeriosis. In addition to a primary module that could help assess current on-farm practices and potential control measures, future QRA models for minimally-processed produce should also contain a refined sanitisation module able to estimate the effectiveness of various sanitisers as a function of type, concentration and exposure time. Finally, L. monocytogenes growth in the products down the supply chain should be estimated by using realistic time-temperature trajectories, and validated microbial kinetic parameters, both of them currently available in the literature.

Extreme climates such as droughts and hot extremes, may result in marked damage to crop yields and threaten regional and global food security. Maize is a major grain crop in Liaoning Province, severely affected by drought and hot events. The objective of this study is to advance an approach to estimate the risk of crop yield reduction under the compound dry-hot events (CDHE) in Liaoning Province. Results show that the ratio of stations experiencing compound dry-hot events during the twelfth leaf and maturity stage tended to increase on the time scale. On a spatial scale, the frequency of compound dry-hot events in central Liaoning Province was relatively low during the whole and various reproductive periods of maize. In addition to the twelfth leaf, western Liaoning Province is prone to compound dry-hot events. The high-risk area for the occurrence of the compound dry-hot events in maize is Chaoyang City, located in the western part of Liaoning Province, and the cities in the low-risk area account for about 64.3% of the total number of cities in Liaoning Province, mainly in the central and northern parts of Liaoning Province. Generally, this study emphasizes focusing on the impacts of compound dry-hot events on agricultural production and provides an index to assess the risk of compound dry-hot events on maize production.

Oilseed plants of the Brassicaceae plant family are cultivated for food, feed and industrial purposes on large-scale in Europe. This review gives an overview of current market-oriented applications of new genomic techniques (NGTs) in relevant Brassicaceae oilseed crops based on a literature survey. In this respect, changes in oil quality, yield, growth and resistance to biotic and abiotic stress are goals in oilseed rape (B. napus) and camelina (C. sativa). Environmental risk assessment scenarios are developed for specific NGT applications in Brassicaceae oilseed crops with either a changed oil composition or with fitness related traits. In case of a changed oil composition an increase or decrease of polyunsaturated fatty acids (PUFA) demonstrates risks for health and survival of pollinators. In case of fitness related traits other risks were identified, i. e. an increased risk of spread and persistence of NGT plants. Furthermore, there are indications for potential disturbance of interactions with the environment, involving signalling pathways and reaction to stress conditions. It is shown that for a comprehensive risk assessment the technological potential of NGTs, the plants’ biology and the scale of releases have to be considered in combination. Therefore, the release of NGT plants into the environment for agricultural purposes will require risk assessment and monitoring of single traits as well as of combinatorial and long-term cumulative effects. In addition, risk management should develop concepts and measures to control and potentially restrict the scale of releases. This is especially relevant for NGT Brassicaceae in Europe which is a centre of diversity of this plant family.

The Internet of Things (IoT) continues to grow at a rapid pace, becoming integrated into the daily operations of individuals and organisations. IoT systems automate crucial services within daily life that users may rely on, which makes the assurance of security towards entities such as devices and information even more significant. In this paper, we present a comprehensive survey of papers that model cyber risk management processes within the context of IoT, and provide recommendations for further work. Using 39 collected papers, we studied IoT cyber risk management frameworks against four research questions that delve into cyber risk management concepts and human-orientated vulnerabilities. The importance of this work being human-driven is to better understand how individuals can affect risk and the ways that humans can be impacted by attacks within different IoT domains. Through the analysis, we identified open areas for future research and ideas that researchers should consider.

With the rapid developments that have been made in computer vision and computer technology, semantic segmentation of high-resolution images has emerged as a mainstream and challenging task. The, segmentation of water areas remains a complex task due to the similar features between water areas or between water areas and other land objects. Meanwhile, since coastlines and riverbanks are typically presented in irregular shapes, it is difficult to obtain the categories of pixels at boundaries. This paper proposed the use of a Water-Land Boundary Attention Network (WLBANet) to improve the accuracy of pixels at boundaries between water and land. This network also reinforced the performance of contextual information extraction into distinguishing between water areas and other land objects. To prove the validity of this proposed network, WLBANet was performed on the Water Land Dataset (WLD), which is also by this paper, and which contains water areas and other land objects categories. The results demonstrates that the proposed method has significant effectiveness.

Multiple governmental agencies and private organisations have made commitments for the colonisation of Mars. Such colonisation requires complex systems and infrastructure that could be very costly to repair or replace in cases of cyber-attacks. This paper surveys deep learning algorithms, IoT cyber security and risk models, and established mathematical formulas to identify the best approach for developing a dynamic and self-adapting system for predictive cyber risk analytics supported with Artificial Intelligence and Machine Learning and real-time intelligence in edge computing. The paper presents a new mathematical approach for integrating concepts for cognition engine design, edge computing and Artificial Intelligence and Machine Learning to automate anomaly detection. This engine instigates a step change by applying Artificial Intelligence and Machine Learning embedded at the edge of IoT networks, to deliver safe and functional real- time intelligence for predictive cyber risk analytics. This will enhance capacities for risk analytics and assists in the creation of a comprehensive and systematic understanding of the opportunities and threats that arise when edge computing nodes are deployed, and when Artificial Intelligence and Machine Learning technologies are migrated to the periphery of the internet and into local IoT networks.

The rapid proliferation of Internet of Things (IoT) devices has transformed various sectors, from smart homes to industrial systems. However, this growth has introduced significant security risks due to the increased attack surface and diverse nature of IoT devices. This paper presents a comprehensive assessment of IoT security risks and explores effective mitigation strategies. We first categorize the primary risks associated with IoT, including data breaches, device manipulation, and network vulnerabilities. Using a multi-layered approach, we analyze these risks in different contexts, such as consumer IoT, industrial IoT, and healthcare. The study then reviews existing security frameworks and protocols, highlighting their strengths and limitations. We propose a hybrid mitigation strategy combining encryption, access control, and anomaly detection to enhance IoT security. Furthermore, we discuss the role of regulatory standards and best practices in reinforcing IoT security. The findings underscore the need for a proactive and adaptive security posture to address evolving threats in the IoT landscape.

in our increasingly interconnected world, sensor networks are critical in gathering and sending data for various applications, from environmental monitoring and industrial automation to healthcare and smart cities. However, as sensor networks expand in importance, so does the need to solve the multidimensional concerns of security, privacy, and forensics. This article explores the complex world of sensor network security, the delicate balance between data privacy and utility, and the emerging area of sensor network forensics. This article focuses on risk assessment of a network.

Managing a portfolio whose value closely tracks an index by trading only in a subset of the index constituents involves an NP-hard optimisation problem. In the prior literature, it has been suggested to solve this problem using sequential Monte Carlo (SMC, a.k.a. particle filter) methods. However, this literature does not take transaction costs into account, although transaction costs are the primary motivation for attempting to replicate the index by trading in a subset, rather than the full set of index constituents. This paper extends the SMC approach to index tracking to allow for proportional transaction costs and implements this extended method on empirical data for a variety stock indices. In addition to providing a more practically useful tracking strategy by allowing for transaction costs, we find that including a penalty for transaction costs in the optimisation objective can actually lead to better tracking performance.

Attention to the work-related musculoskeletal disorders (WMSDs) involve also statistical surveys showing an increasing trend in the incidence of WMSDs. Technological development retrieves new tools and methods for the assessment of physical load at work. In addition to the conventional questionnaires and scaling assessment systems, these methods are mostly based on the direct sensing of appropriate parameters, which allows more precise quantification. The aim of this paper is to compare the assessment of ergonomic risk through current legislative regulations. A Captiv wireless sensor system was used at a car headlight quality control assembly workplace for sensing, data acquisition and data processing. During the evaluation of the postures and movements at work, we discovered differences in the applicable standards: Decree 542/2007 Coll. (Slovak legislation), STN EN 1005-4+A1, French standards default in the Captiv system. Standards define the thresholds for hazardous postures with significant differences in several evaluated body segments, which also affects the final evaluation of the measurements. Based on the results of our research, we found that respondents were in an acceptable position for approximately 63% of the total duration of the work activity in terms of the Legislative method, 44% with Captiv and 27% with Standards method.

Abstract: Global ecological concern regarding the transfer of fouling organisms to ship hulls is increasing. This study investigated the species composition, dominant species, distribution patterns, community structure, and life-cycle differences of hull-fouling macroinvertebrates on five research vessels (R/Vs: Isabu, Onnuri, Eardo, Jangmok 1, and Jangmok 2) operated by the Korea Institute of Ocean Science and Technology (KIOST). Hull-fouling macroinvertebrates were collected three to five times on quadrats from the upper and middle sectors of the hull sides, bottom, and niche areas (the propellers and shafts and the thrusters). A total of 47 macroinvertebrate species were identified, represented by 8,519 individuals(ind.)/m2 and a biomass of 1,967 gWWt/m2 on the five vessels. The number of species, density, and biomass were greater on the coastal vessels the Eardo, Jangmok 1, and Jangmok 2 than on the ocean-going vessels the Isabu and Onnuri. Among the coastal vessels, barnacles were the most abundant and had the greatest density, while mollusks had the highest biomass. Differences between hull sectors showed that the highest species abundance and density appeared on all hulls in ports and bays where the Jangmok 1 operated, while the highest species abundance, density, and biomass were identified in the niche areas of the Eardo, which operated farther from the coast. The hull-fouling macroinvertebrates that exceeded 1% of all organisms were the barnacles Amphibalanus amphitrite, Balanus trigonus, and Amphibalanus improvisus; the polychaete Hydroides ezoensis; the bivalves Magallana gigas and Mytilus galloprovincialis; and the amphipod Jassa slatteryi. The dominant species were cosmopolitan and globally distributed, and many of them were cryptogenic. Six native species were identified: M. gigas, H. ezoensis, the amphipod Melita koreana, the isopod Cirolana ko-reana, and the barnacle B. trigonus and F. kondakovi. Eight non-indigenous species (NIS) were de-tected: barnacles A. amphitrite and A. improvisus, the bivalve M. galloprovincialis, the polychaete Perinereis nuntia, amphipods J. slatteryi and Caprella californica, and bryozoans Bugulina californica and Bugula neritina. Of the fouling macroinvertebrates found on the vessel hulls, 13% were native and 17% were NIS. The nMDS ordination analysis of the five vessels showed four clusters of fouling macroinvertebrate communities: two ocean clusters (the Isabu and Onnuri), one coastal cluster (the Eardo and Jangmok 2), and one local cluster (the Jangmok 1). More diverse communities developed on the hulls of vessels that operated locally rather than globally or in deep oceans. Spearman rank correlation showed that biological indices such as number of species, density, and biomass correlated highly and positively with the numbers of days on coastal operations and negatively with the number days on ocean operations. The species diversity index correlated positively with the total number of anchoring days and coastal operation days and negatively with the total number of operation days and ocean operation days. The macroinvertebrates differed by the area of operation, the port of anchorage, the number of days in operation and at anchor, and the hull sectors. There is no previous research data on hull-fouling macroinvertebrates in the Republic of Korea, and this study provides a basis for future studies to identify introduced species and their differences based on operation area.

In the past two decades, several floods have affected people and their properties in Burkina Faso, with the unprecedented flooding occurring in Ouagadougou in September 2009. So far, most studies have focused on Ouagadougou and surrounding localities and have paid little attention to other flood-prone regions in Burkina Faso. Specifically, there is a data and knowledge gap about the flood risk in the Haut-Bassins region, which in turn hampers the development of mitigation strategies and risk reduction measures in communities. This study demonstrates how data collected at the household level can be used to understand flood risk and its components at the village level in this data-scarce region. Using an indicator-based method, we analyze both flood risk and flood risk perception at the village level. Moreover, we determine the factors influencing flood risk perception at the household level using an ordered logit model. We find that 12 out of the 14 villages considered, experience high levels of flood risk. The management of runoff from the nearest urban areas and poorly designed civil engineering infrastructures, such as roads, were highlighted by the households as significant factors that increase their vulnerability. Hence, dependencies in space and between urban and rural areas may play a substantial role in modifying risk. The perceived flood risk consistently exceeds the estimated flood risk, with an insignificant positive correlation between both risk indices. Regression results indicate that flood risk perception is mainly influenced by informational and behavioral factors of the households. The findings of this study can provide valuable information to municipal and regional authorities involved in disaster risk management in the study area. Moreover, the method is transferable to other data-scarce regions

The purpose of this study is to establish whether digital literacy and insurtech adoption influence insurance inclusion in Uganda. Principally, we sought to determine whether insurtech adoption mediates the nexus between digital literacy and insurance inclusion. This study adopted a cross-sectional and quantitative correlational approach. The study’s sample was 391 individuals who had used digital platforms such as mobile phones and computers to access insurance products and services in Uganda. Data were collected using structured survey questionnaires. Partial Least Squares Structural Equation Modelling (PLSEM) was employed to test the hypothesised relationships. The results demonstrate that both digital literacy and insurtech adoption significantly and positively influence insurance inclusion. We also found digital literacy to be a significant and positive determinant of insurtech adoption. Markedly, it was found that insurtech adoption mediates the association between digital literacy and insurance inclusion in Uganda. However, this study was conducted in a developing country with an underdeveloped insurance market and with low technological advancement. This may affect generalisation of the study findings. This study’s novelty lies in establishing how digital literacy and insurtech adoption interplay to influence insurance inclusion in Uganda. This is the first study to examine the effect of digital literacy and insurtech adoption on insurance inclusion.

This research work focused on the risks we are faced with on our day to day activities, either directly or indirectly, which can gradually accumulates and results to communal crisis, religious crisis, socio-economic agitations and tribal crises. Nasarawa Eggon Local Government Area of Nasarawa State was used as case study and a well structure close–ended questionnaire was used for data collection as it relates to Controlled Self Risk Assessment (CSRA) and linear programming technique was used to analyze. The results proved that many of this processes were neglected in these communities, making them to be prone to incessant communal crisis. The study recommend that Government should strongly, as a matter of urgency address the unemployment rate, distribution of political position, schools, primary health care and equip security personnel with the modern technology facilities, which happen to record the highest risk level.

The purpose of this review is to elucidate the actual threat of the most prevalent mycotoxins in agricultural commodities and human/animal food/feed for appearance of foodborne ailments and diseases. The underestimated hazard of joint mycotoxin uptake of animals or humans is critically discussed with regards to synergistic or additive interaction between some target mycotoxins. The real toxicity of target mycotoxin combinations as it happens in practice is evaluated and possible lower limit values or control measures are suggested in such cases. Some critical points in adequate risk assessment, hygiene control and regulation of mycotoxns are discussed. The efficiency of current mycotoxin regulations and control measures is evaluated in regards to human/animal health hazard. The risk assessment in the case of multiple mycotoxin exposure of humans/animals via the food/feed or agricultural commodities is evaluated and some suggestions are proposed in such cases. Appropriate control measures and food safety issues throughout the food supply chain are proposed in order to prevent target foodborne diseases. Some preventive measures and possible veterinary hygiene control or risk assessment are proposed in some practical cases of foodborne diseases for preventing mycotoxin contamination of animal products designed for human consumption and to avoid possible public health issues.

Advances in early detection of Breast cancer and treatment improvements have significant-ly increased survival rates. Traditional screening methods, including mammography, MRI, ultrasound, and biopsies, while effective, often come with high costs and risks. Recently, thermal imaging has gained attention due to its minimal risks compared to mammography, although it is not widely adopted as a primary detection tool since it depends on identifying skin temperature changes and lesions. The advent of machine learning (ML) and deep learning (DL) has enhanced the effectiveness of breast cancer detection and diagnosis using this technology. In this study a novel methodology for developing an interpretable computer-aided diagnosis (CAD) system for breast cancer detection, leveraging explaina-ble Artificial Intelligence (XAI) throughout its various phases. To achieve these goals, we proposed a new multi-objective optimization approach named Hybrid Particle Swarm Optimization algorithm (HPSO) and Hybrid spider Monkey Optimization algorithm (HSMO). These algorithms simultaneously combine the continuous and binary representations of PSO and SMO to effectively manage trade-offs between Accuracy, feature selection and hyperparameter tuning. We evaluate several CAD models and investigate the impact of handcrafted methods such as Local Binary Patterns (LBP), Histogram of Oriented Gradients (HOG), Gabor filters, and edge detection. We further shedding light on the effect of feature selection and optimization on feature attribution and model decision-making processes using the SHapley Additive exPlanations (SHAP) framework, with a particular emphasis on cancer classification using the DMR-IR dataset. The results of our experiments demonstrate in all trials that the performance of the model is improved. Also with HSMO our models achieved a high accuracy of 98.27% and F1- score of 98.15% while selecting only 25.78% of the HOG features. This approach not only boosts the performance of CAD models but also ensures comprehensive interpretability. This method emerges as a promising and transparent tool for early breast cancer diagnosis.

This study aimed to develop a state-of-the-art method for assessing chemical risks. The method combined desk research findings and the authors' practical knowledge to identify the major shortcomings in performing risk assessments at the workplace. Data were collected from nine SMEs across three sectors: agriculture, laboratory research, and conservation and restoration laboratories. The results of the discussions with the workers and on-site observations were used to develop the method to assess chemical risks. The method uses numerical factors to account for the level of conformity and the duration of exposure to support an estimation of the probability of an incident. The developed method was designed to enhance risk assessment practices and tackle common issues encountered by enterprises, including SMEs.

The importance of frailty in older people is getting constant recognition as an important aspect both in terms of public health, as well in personal level for the appropriate management of an older person health condition. This is reflected by the continuously increasing number of research studies carried out in several settings across different countries. Sometimes this is very solid, but in other cases there is a considerable gap in terms of accurate and well grounded documentation of frailty status. This is the case in Greece, where we are missing clinically validated tools to approach frailty. We are missing frailty screening tools, such as for instance PRISMA 7, the gold standard tool of Fried criteria is somehow problematic since the question referring to physical activity originates from a questionnaire that has not been translated and validated, while Clinical Frailty Scale has been validated for the translation but not for the capacity to detect frailty. Aim of this study is to validate these tools for their accuracy to detect frailty by using a measurable index of frailty, previously proposed for use in clinical studies: the Short Physical Performance Battery (SPPB). 74 male and female participants have been evaluated for their frailty status using different tools. We observed that PRISMA 7 translation detects frailty only when one question is removed at a cut-off of ≥ 2 and indicated a sensitivity of 88.1%, and specificity of 99.9% with a good correlation with SPPB measurements (r = 0.858; p < 0.001). When CFS was validated using SPPB it demonstrated a very good correlation (r = -0.838; p < 0.001 respectively) as it was the case for the modified Fried Criteria (r = -0.725; p < 0.001). All items demonstrated a good correlation between them. We can here propose that we can accurately assess frailty status in the community setting by using a modified version of Fried criteria, Clinical Frailty Scale translation in Greek and we can screen for frailty by using the Greek translation of PRISMA 7 only after removing the item 6 of the questionnaire.

The Solvency II regulatory framework specifies procedures and parameters for determining solvency capital requirements (SCRs) for insurance companies. The proposed standard SCR calculations involve two steps. The Value–at–Risk (VaR) of each risk driver is measured and, in a second step, all components are aggregated to the company’s overall SCR, using the Standard Formula. This formula has two inputs: the VaRs of the individual risk drivers and their correlations. The appropriate calibration of these input parameters has been the purpose of various Quantitative Impact Studies that have been conducted during recent years. This paper demonstrates that the parameter calibration for the equity–risk module—overall, with about 25%, the most significant risk component—is seriously flawed, giving rise to spurious and highly erratic parameter values. As a consequence, an implementation of the Standard Formula with the currently proposed calibration settings for equity–risk is likely to produce inaccurate, biased and, over time, highly erratic capital requirements.

The causal networks are important for understanding the signaling alterations in diseases. To reveal the network pathways affected in epithelial-mesenchymal transition (EMT) and cancer stem cells (CSCs), which are related to poor prognosis of cancer, the molecular networks and gene expression in diffuse- and intestinal-type gastric cancer (GC) have been analyzed. The network pathways in GC were analyzed in Ingenuity Pathway Analysis (IPA). The analysis of the probe sets of which gene expression has significant differences between diffuse- and intestinal-type GC in RNA Sequencing publicly available data identified 1099 causal networks in diffuse- and intestinal-type GC. Master regulators of the causal networks included lenvatinib, pyrotinib, histone deacetylase 1 (HDAC1), mir-196, and erb-b2 receptor tyrosine kinase 2 (ERBB2). The analysis of the HDAC1-interacting network identified the involvement of regulation of EMT by growth factors pathway, coronavirus pathogenesis pathway, and vorinostat. The network had RNA-RNA interactions with microRNAs such as mir-10, mir-15, mir-17, mir-19, mir-21, mir-217, mir-223, mir-25, mir-27, and mir-34. These molecular networks revealed in the study may lead to the identification of drug targets for GC.

This analysis examines the wide range of occupational and environmental health risks that affect people in diverse settings. This article emphasizes the importance of conducting exposure and risk assessments to safeguard public health by analyzing various hazards, including arsenic, oil accidents, lead, welding fumes, and mycotoxins. Various methodologies are utilized in these research articles to conduct the study, emphasizing hazard identification, exposure assessment, and risk characterization. The results uncover harmful substances, vulnerable demographics, and occupational duties linked to increased hazards. The report suggests various mitigation strategies, such as targeted interventions, enhanced community efforts, and improved exposure estimates. Notwithstanding the constraints identified in certain studies, the review emphasizes the necessity for continuous investigation to improve assessments of exposure, comprehend the cumulative effects, and examine the wider societal consequences. The significance of sector-specific risk assessments, protective measures, and ongoing monitoring is underscored to ensure mental and physical health protection.

This study introduces an integrated method for managing process risks in a Business Process Reengineering (BPR) project, using Robust Data Envelopment Analysis (RDEA) and machine learning (ML). The goal is to prioritize risks based on three standard factors of PFMEA: Severity, Occurrence, and Detection (S-O-D), and incorporating two additional factors (Breakdown Cost and Breakdown Duration) seen as undesirable outputs. The model also accounts for the effect of uncertainty on expert-estimated values by applying disturbance percentages in the linear PFMEA-RDEA model. A machine learning model is proposed to predict new values if partial or total modifications have been made to the processes. The approach was implemented in an au-tomotive sector company, and the results showed the impact of uncertainty on values by com-paring different approaches such as RPN, PFMEA-DEA, and PFMEA-RDEA. A new reduced risk categorization was achieved, who allowed for decision-makers to focus on necessary actions for reengineering.

Cannabidiol (CBD), a non-psychotropic main component of the Cannabis plant, is approved as a drug in the European Union (EU) under the name “Epidyolex”. However, the approval process as a food ingredient under the Novel Food Regulation was paused by the European Food Safety Authority (EFSA) due to a lack of safety data. Nevertheless, there is a growing, unregulated market in which CBD is advertised with various health claims and different dosage instructions. Of particular concern is its toxic effect on the liver and possible reproductive toxicity in humans. Studies suitable for calculating a benchmark dose were identified from the available data. Animal studies yielded a Benchmark Dose Lower Confidence Limit (BMDL) of 43 mg/kg bw/day, which translates into a safe human dose of approximately 15 mg/day. Only a Lowest Observed Adverse Effect Level (LOAEL) of 4.3 mg/kg bw/day could be identified from the human data. This updated risk assessment confirmed the Health-based Guidance Value (HBGV) of 10 mg/day based on human LOAEL. Despite existing data gaps, preliminary regulation appears advisable as the current form of the gray CBD market is unacceptable from the standpoint of consumer safety and protection.

: Fluoride toxicity has become a global public health concern, and its significant source of exposure is drinking water. This study aimed to determine groundwater fluoride level and assess its related human health risks. Its level was measured from groundwater samples using an ion-selective electrode. The total hazard index was assessed based on the chronic daily oral intake and dermal absorbed dose of groundwater fluoride. Analyses were conducted using ArcGIS and SPSS. This study reported groundwater fluoride ranged from 0.3 mg/L to 38 mg/L, with a mean annual level of 15 mg/L. Groundwater fluoride level above 5 mg/L was reported in 60 % of the water samples. Total hazard index values among sampled locations varied from 0.18 to 22.56. Half (51.5 %) of infants, 85.5 % of children, 82.5 % of adolescents, and 67.5 % of adults had a risk of developing a non-carcinogenic health effect. This study demonstrated that the fluoride level of the groundwater sources was high, and the water was not suitable for drinking, a result that is of special importance for children and adults since they are a hypersensitive subgroup of the population.

To decrease oral pathogens and increase the number of beneficial bacteria, probiotics and bioactive compounds made via microbial bioconversion are recently used. In addition, the interest regarding probiotics-mediated bioconversion with popular medicinal plants is increasing. These compounds produced during the process exhibit synergistic effect and enhance a variety of biological activities including pathogen inhibition in host. Therefore, we developed bioconverted milk with high inhibitory activity against oral pathogens and α-glucosidase. Lactiplantibacillus plantarum SMFM2016-RK was chosen as the probiotic due to its beneficial characteristics such as high acid and bile tolerance, antioxidant activity, and α-glucosidase inhibition. Based on the minimal bactericidal concentration against three oral pathogens, the following appropriate concentrations of Artemisia herba-alba extract were added to milk: 5 mg/mL of A. herba-alba ethanol extract and 25 mg/mL of A. herba-alba hot-water extract. Four bioconverted milks (BM), BM1, BM2, BM3, and BM4, were produced by combining L. plantarum SMFM2016-RK alone, L. plantarum SMFM2016-RK and ethanol extract, L. plantarum SMFM2016-RK and hot-water extract, and L. plantarum SMFM2016-RK with both extracts. As a result of antimicrobial activity, BM3 inhibited the growth of Aggregatibacter actinomycetemcomitans and Porphyromonas gingivalis the most, and BM4 suppressed the growth of Fusobacterium nucleatum the most. In addition, bioconverted milk containing A. herba-alba (BM2, BM3, and BM4) inhibited α-glucosidase more effectively than BM1. In conclusion, A. herba-alba-added milk bioconverted by L. plantarum SMFM2016-RK displayed the growth inhibitory effect on oral pathogens and the α-glucosidase inhibitory activity, thus it necessitates to evaluate the effects on the alleviation of oral diseases and glycemic control through future animal experiments.

BACKGROUND Detecting total cholesterol in dried blood spots could aid in identifying individuals with a high likelihood of familial hypercholesterolemia and could be used as a screening measure. This study aims to assess the diagnostic accuracy of dried blood spots on Whatman 903 paper cards using a manual enzymatic technique. METHODS A total of 394 samples collected as serum and dried blood spots were compared. Cholesterol was determined in serum using the automated reference method, while cholesterol on paper was measured using a manual enzymatic method. Within- and between-day diagnostic variability were analyzed. The correlation between both methods was assessed using Passing-Bablok regression and Bland-Altman plot. Internal validation of our correlation formula was performed on 149 samples, along with external validation of the formula proposed by Corso et al. RESULTS The within- and between-day coefficient of variation was found to be lower than 10.14% and 14.09%, respectively. Method comparison yielded an area under the curve of 0.976, with a standard error of 0.009. Passing-Bablok regression indicated a precision of 0.803 and an accuracy of 0.96. Internal validation precision was measured at 0.716. Regarding internal validation, calculated cholesterol with our regression line did not differ from serum cholesterol analysis, while significant differences were observed in calculated cholesterol levels using the external formula. CONCLUSIONS Total cholesterol analysis in dot blood spots demonstrates high precision and reproducibility. This method reliably enables the incorporation of this biological marker into neonatal screening for familial hypercholesterolemia detection.

The COVID-19 pandemic caused by the novel severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) virus has exposed the vulnerabilities and unpreparedness of the global healthcare system in dealing with emerging zoonoses. In the past two decades, coronaviruses (CoV) have been responsible for three major viral outbreaks, and the likelihood of future outbreaks caused by these viruses is high and nearly inevitable. Therefore, effective prophylactic universal vaccines targeting multiple circulating and emerging coronavirus strains are warranted. This study utilized an immunoinformatic approach to identify evolutionarily conserved CD4+ (HTL) and CD8+ (CTL) T cells, and B-cell epitopes in the coronaviral spike (S) glycoprotein. A total of 132 epitopes were identified, with the majority of them found conserved in the bat CoV, pangolins CoV, endemic coronaviruses, SARS-CoV-2, and Middle East respiratory syndrome coronavirus (MERS-CoV). Their peptide sequences were then aligned and assembled to identify the overlapping regions. Eventually, two major peptide assemblies were derived based on their promising immune-stimulating properties. In this light, they can serve as lead candidates for universal coronavirus vaccine development, particularly in the search for pan-coronavirus multi-epitope universal vaccines that can confer protection against current and novel coronaviruses.

The acoustic startle response (ASR) is an explosive motor response leaded by a sudden and intense acoustic stimulus. ASR has several clinically relevant forms of plasticity, including habituation and sensorimotor gating. Although ASR and its plasticity have been intensively studied in different animal models, including zebrafish (Danio rerio) larvae, information in adult zebrafish is still very scarce. In this manuscript we present Zebra_K, a new automated high-content kinematic analysis platform for assessing ASR, its habituation and prepulse inhibition (PPI), a quantitative measure of sensorimotor gating, in adult zebrafish. The analysis of the kinematic parameters in 1,875 ASR in adult zebrafish has shown a single response wave consistent with the short-latency C-bend described in zebrafish larvae. Moreover, protocols have been designed and validated in Zebra_K for the analysis of sensitivity, habituation and PPI of this response. Then, this platform has been used to determine the effect of pharmacological and physiological modulators of ASR plasticity. As described in other animal models, the NMDA-receptor antagonist ketamine increased the responsiveness to the acoustic stimuli, decreasing habituation and leading to complete abolition of PPI. Moreover, the effect of the gender on zebrafish ASR plasticity has been analyzed for the first time. Females exhibited higher responsiveness and a lower habituation and PPI than males, a result consistent with the gender effect described in other animal models and in humans. These results enhance the interest of using adult zebrafish to assess the potential effect of chemicals or genetic manipulations on ASR plasticity.

Deploying search and rescue (SAR) dogs in disaster situations is crucial for effective rescue missions. This study delves into the challenges and obstacles encountered during the use of SAR dogs, particularly focusing on the earthquake that hit Turkey in February 2023. By employing a case study approach, the research explores various factors that impact the efficiency and safety of SAR dog operations, such as environmental conditions, equipment needs, cultural perceptions, and logistical hurdles. Environmental conditions such as extreme weather, hazardous materials, and unstable structures present significant risks to both the dogs and their handlers. The adequacy of equipment, including protective gear and medical supplies, is critical for ensuring the safety and efficiency of rescue operations. Logistical challenges, including the transportation and care of dogs in disaster zones, further complicate their deployment. Cultural barriers also play a crucial role, as perceptions of dogs vary widely across different communities, potentially affecting the acceptance and integration of canine units in rescue efforts. The case study of the earthquake in Turkey highlights these issues, showcasing the successes and setbacks experienced by international rescue teams. The findings indicate that although SAR dogs are invaluable in locating survivors, they face significant dangers, including hazardous materials, extreme weather, and physical injuries. Additionally, cultural differences and logistical issues complicate their deployment. This paper highlights the necessity for improved training, protective measures, and international standards to ensure SAR dogs' well-being and effectiveness in disaster response efforts. The study's implications suggest that addressing these challenges can markedly enhance the preparedness and resilience of SAR teams, leading to more efficient and safer rescue operations in future disaster scenarios.

(1) Background: Second Victims are health care workers negatively affected by adverse events and are prone to developing dysfunctional coping strategies compromising not only their own, but also patient safety. An effective way to address this issue is the implementation of peer support programs. This paper reports on the effectiveness of a peer support program at the Austrian Hietzing Clinic (KHI). (2) Methods: Telephone interviews were carried out after peer support sessions using a questionnaire. Descriptive analysis was carried out reporting frequencies and proportions for nominal variables, means with standard deviations for ordinal and interval-scaled variables. (3) Results: So far, 45 peer supporters have completed telephone interviews after a peer support session. The main reasons for the session were bad news from the private sphere and death of a patient. The peer supporters rated the helpfulness of the sessions for their colleagues as very high while not feeling very burdened themselves afterwards. (4) Conclusions: Underutilization of the program is probable. However, the high rating of helpfulness of the carried-out sessions by the peer supporters in combination with them not feeling very burdened, shows that the program is safe for the peer supporters and an upscaling is warranted.

Genetic variability in rice breeding program plays the very crucial role. It provides outstanding pool of superior alleles governing better agronomic and quality characters through association mapping. For the understanding of population structure and genetic relationship among the different rice lines is indispensable prior to setting of correlation among dynamic alleles and traits. In the present investigation, genetic diversity and population structure of 116 rice accessions by using 64 polymorphic SSR markers was targeted for the evaluation of the genetic relatedness and diversity. Genotyping assessment based on SSR markers revealed a total of 225 alleles, with an average PIC value of 0.755. The germplasm lines were classified into three distinct subgroups through population structure analysis, utilizing both model and distance-based approaches. AMOVA analysis showed that 11% of the total variation could be attributed to differences between groups, while the remaining 89% of the variation was likely due to differences within groups. The study suggests that the population structure and genetic relatedness should be considered when working with the core collection of 116 rice germplasm lines for association mapping, aiming to establish marker-trait associations.

The Internet of Things (IoT) has revolutionized various industries, but the increased dependence on all kinds of IoT devices and the sensitive nature of the data accumulated by them pose a formidable threat to privacy and security. While traditional Intrusion Detection Systems (IDSs) have been effective in securing critical infrastructures, the centralized nature of these systems raises serious data privacy concerns, as sensitive information is sent to a central server for analysis. This research paper introduces a Federated Learning (FL) approach designed for detecting intrusions in diverse IoT networks that addresses the issue of data privacy by ensuring that sensitive information is kept in the individual IoT devices during model training. Our framework utilizes the Federated Averaging (FedAvg) algorithm, which aggregates model weights from distributed devices to refine the global model iteratively. The proposed model manages to achieve above 90\% accuracy across various metrics, including precision, recall, and f1-score, while maintaining low computational demands. The results show that the proposed system successfully identifies various types of cyber attacks, including DoS, DDoS, Data Injection, Ransomware, and several others showcasing its robustness. This research makes a great advancement to the intrusion detection systems by providing an efficient and reliable solution that is more scalable and privacy friendly than any of the existing models.

Strengthening the analysis and risk assessment of the pig epidemic will help to better prevent and mitigate epidemic risks and promote high-quality development of the pig industry. Based on the systematic grasp of the situation of live pig epidemics, a risk assessment index system was constructed, and the spatial and temporal variation characteristics of the risk of pig epidemics in China were explored by the entropy method. In recent years, the overall trend in pig epidemics in time first increased and then decreased, and in space, the trend in the acceleration of the spread across the country continued to weaken. China still faces challenges, such as many types and a wide range of diseases, large total livestock breeding and weak epidemic prevention and control capacity, and a large risk of introduction of foreign animal epidemics. The spatial and temporal variation in the pig epidemic risk was obvious; there was one high-risk area, two higher-risk areas and 10 medium-risk areas in recent years, and the epidemic risk was highest in Beijing, Hainan, Liaoning, Tibet and Zhejiang. However, there were significant differences in the regional distribution of the risk of pig epidemics in different years. To further build a secure “defense system” for the high-quality development of the pig industry, it is recommended to improve the monitoring and early warning system of pig epidemic risk, perfect the pig epidemic prevention and control system, and strengthen the regional collaboration mechanism of epidemic prevention and control.

The increased adoption of information and communication technology for smart grid applications will require innovative cyber-physical system (CPS) testbeds to support research and education in the field. The groundbreaking CPS testbeds with realistic and scalable platforms have progressively gained interest in recent years, with electric power flowing in the physical layer and information flowing in the network layer. However, CPSs are critical infrastructures and not designed for testing or direct training, as any misbehaving in an actual system operation could cause a catastrophic impact on its operation. Based on that, it is not easy to efficiently train professionals in CPSs. Aiming to support the advancement and encourage the training of industry professionals, this paper proposes and develops a complete testbed with commercial tools. The testbed can reliably replicate the performance of smart grid systems and the main potential cyber threats that electric grids may face. The complex interdependencies between the cyber and physical domains are discussed in detail, and different case scenarios are presented, providing insightful guidelines for key features and design decisions for future smart grid testbeds.

Cybercrime Threat Intelligence (CTI) allows us to change our actions from reactive to proactive in the fight against threat actors, and to make more informed, data-driven security decisions. Thus this study proposes the practical implementation of CTI in the Arab world. This study focuses on strengthening CTI by integrating Indicators of Compromise (IoCs) and collecting realistic security alerts from honeypot systems and open source intelligence. The collected data is stored in the Malware Information Sharing Platform (MISP), an open source platform that allows users to create and share IoCs with other organizations while staying informed about new threats. It features an intuitive interface for data analysis and threat identification, facilitating sharing, storage, and correlation of IoCs. Therefore, we leveraged MISP to generate IoCs based on the collected data and analyzed the results to identify potential cyber threats. The implemented platform aims to provide organizations with actionable information to prevent, detect and respond to cybercrime. This study presents a practical approach to strengthening CTI in the Arab world and provides an opportunity to strengthen the region’s security posture.

Background: Cyber Security is to protect online data and software from cyber threats. These cyberattacks are typically intended to gain access to, change, or delete sensitive information; extort money from users; or disrupt regular corporate activities. It is difficult to keep up a regular follow up with new technologies so it is necessary to keep the important data safe from cyber threats. There are many types of cyber threats; malware, ransom-ware, social engineering, phishing etc. To prevent cyber-attacks one can use password manager tools like LastPass and others. People also use two factor authentication for double security on their accounts. Methods: Boards such as the National Institute of Standards and Technology (NIST) are developing frameworks to assist firms in understanding their security risks, improving cybersecurity procedures, and preventing cyber assaults. The fight against cybercrimes and attack, rganisations needed a strong base there are 5 types of cyber securities; Critical Infrastructure Security, application security, network security, cloud security and (IoT) Security. In the modern time US is highly based on computers and on different software so it is really important for US to be more conscious about the security as they get many threats almost everyday for hacking their data and accounts.Results and Conclusion: Nowadays, even small businesses rarely recover their loss from the cyber-attacks and many back-off from continuing their businesses after being target of hackers. The first cybercrime attack was recorded on 1988 by a graduate student. Now that large companies and even small businesses are aware of cyber-attacks so they try their best to take every precaution to prevent the hacking with double security and password manager tools.

This study critically explores the legislative frameworks and national regulations of Serbia, Croatia, and Slovenia concerning the engagement, training, and responsibilities of search and rescue dogs and their handlers. The goal is to offer a thorough understanding of how these dogs and their handlers are engaged, trained, and managed in each country. By carefully analyzing the legal foundations, the study aims to clarify the rights, duties, and responsibilities of all parties involved, ensuring that search and rescue dog deployments are conducted within a structured and lawful framework. Such an understanding is crucial for improving disaster management and ensuring a coordinated response to various emergencies. The findings reveal that although each country has strong legal provisions for deploying search and rescue dogs, there are significant differences in the detail and scope of these regulations. Slovenia is notable for its detailed guidelines, regular evaluations, and licensing processes, setting a high standard. Croatia benefits from strong institutional support and active international collaboration, which greatly enhances its disaster response capabilities. On the other hand, Serbia, despite having a solid foundational framework, could improve by better coordinating with non-governmental organizations and aligning more closely with international standards. Key areas for improvement include harmonizing standards, enhancing training programs, increasing public awareness, better resource allocation, and adopting new technologies. By addressing these issues, Serbia, Croatia, and Slovenia can further strengthen their legal and institutional frameworks, ensuring their search and rescue teams are better prepared for disasters. This study emphasizes the need for continuous improvement through collaboration, standardization, and innovation to maximize the effectiveness of search and rescue operations involving dogs.

This paper addresses the growing concerns surrounding cloud computing security and highlights key strategies for ensuring the privacy and protection of data in information-critical industries. Cloud computing has revolutionized the field of information technology, providing convenience and efficiency in data processing. However, it has also brought to light significant challenges in terms of data security and privacy. Given the rise in cyber threats and the potential risks associated with storing sensitive information on cloud servers, critical industries such as healthcare and banking have been hesitant to adopt cloud computing as a trusted solution for their data needs. This work examines the specific security concerns that these industries face and proposes measures to mitigate them. Further, the paper explores the barriers that hinder the adoption of cloud computing in critical industries and offers solutions to address these concerns.

Cyberattacks are rapidly evolving both in terms of techniques and frequency, from low-level attacks through to sophisticated Advanced Persistent Threat (APT). There is a need to consider how testbed environments such as cyber ranges can be readily deployed to improve examination of attack characteristics and the assessment of defences. Whilst cyber ranges are not new, they can often be computational expensive, require significant setup and configuration, or may not provide full support for areas such as logging or ongoing learning. In this paper, we propose GoibhniUWE, a container-based cyber range that provides a flexible platform for investigating the full lifecycle of a cyber attack. Adopting a modular approach, users can seamlessly switch out existing, containerised vulnerable services, deploying multiple different services at once allowing for the creation of complex and realistic deployments. The range is fully instrumented with logging capabilities from a variety of sources including Intrusion Detection Systems (IDS), service logging, and network traffic captures. To demonstrate the effectiveness of our approach, we deploy the GoibhniUWE range under multiple conditions to simulate various vulnerable environments, reporting on and comparing key metrics such as CPU and memory usage. We simulate complex attacks which span multiple services and networks, with logging at multiple levels, modelling an Advance Persistent Threat (APT) and their associated Tactics, Techniques, and Procedures (TTPs). We find that even under continuous, active and targeted deployment GoibhniUWE averaged a CPU usage of less than 2 processors and memory usage of less than 4.5 GB.

Importance and need for cyber security have increased in folds since a decade. Indirectly, the country’s security depends on the country’s cyber-physical systems. Attackers are becoming more innovative, and attacks are becoming undetectable, causing huge risks to the systems. In this scenario, intelligent and evolving detection methods should be introduced to replace the basic and outworn ones. This article discusses about new-age intelligence and smart techniques dealing with artificial intelligence (AI) models. Artificial intelligence for cyber security is reviewed, and the performance of machine learning models (ML) and deep learning (DL) models are analysed. A real-time case study of stealthy local covert attacks with false data injection attacks is implemented on the DC-DC converter. A deep learning model is designed to mitigate cyber attacks, and its performance is evaluated.

Importance and need for cyber security have increased in folds since a decade. Indirectly, the country’s security depends on the country’s cyber-physical systems. Attackers are becoming more innovative, and attacks are becoming undetectable, causing huge risks to the systems. In this scenario, intelligent and evolving detection methods should be introduced to replace the basic and outworn ones. This article discusses about new-age intelligence and smart techniques dealing with artificial intelligence (AI) models. Artificial intelligence for cyber security is reviewed, and the performance of machine learning models (ML) and deep learning (DL) models are analysed.

The evaluation of crowdfunding campaigns varies from person to person; some investors are more interested in the creativity of the project, and others are more concerned with the profiles of entrepreneurs. The study investigated how entrepreneurs’ face disclosure influenced the success of crowdfunding. Secondary data was collected from multiple crowdfunding platforms for projects in Africa, that is, cross-country data from 54 African countries, to overcome data limitations from a single country. Econometrics analysis revealed that the facial disclosure of entrepreneurs increases the probability of crowdfunding success. Images, videos, and backers had a positive influence on the success of crowdfunding. On the contrary, the duration of the crowdfunding campaign was negatively associated with its success. To reduce the knowledge asymmetry between creators and backers, those prepared to start a crowdfunding project must provide as much information as possible to show their abilities. This study contributes to understanding the role of disclosing an entrepreneur’s profile on economic exchanges in the success of online crowdfunding. The signalling and agency theories support the finding. The findings were limited to crowdfunding projects on the African continent and are not necessarily applicable to some developed countries.

The North China Plain is among the regions most afflicted by ground fissure disasters in China. Recent urbanization has accelerated ground fissure activity in the three counties of the northern North China Plain, posing significant threats to both the natural environment and socioeconomic sustainability. Despite the increased attention, a lack of comprehensive understanding persists due to delayed recognition and limited research. This study conducted field visits and geological surveys across 43 villages and 80 sites to elucidate the spatial distribution patterns of ground fissures in the aforementioned counties. By integrating these findings with regional geological data, we formulated a causative model to explain ground fissure formation. Our analysis reveals a concentration of ground fissures near the Niuxi and Rongxi faults, with the former exhibiting the most extensive distribution. The primary manifestations of ground fissures include linear cracks and patch-shaped collapse pits, predominantly oriented in east-west and north-south directions, indicating tensile failure with minimal vertical displacement. Various factors contribute to ground fissure development, including fault activity, ancient river channel distribution, bedrock undulations, rainfall, and ground settlement. Fault activity establishes a concealed fracture system in shallow geotechnical layers, laying the groundwork for ground fissure formation. Additionally, the distribution of ancient river channels and bedrock undulations modifies regional stress fields, further facilitating ground fissure emergence. Rainfall and differential ground settlement serve as triggering mechanisms, exposing ground fissures at the surface. This research offers novel insights into the causative mechanisms of ground fissures in the northern North China Plain, providing valuable scientific evidence for mitigating ground fissure disasters during the urbanization process in the region.

Cardiovascular diseases (CVD) are rising rapidly among the postmenopausal woman but they are less likely to identify their risk by an appropriate risk assessment tool. This review evaluates available literature on cardiovascular risk assessment among postmenopausal women to provide a concise view of risk factors and disease burden among them, present risk assessment systems including their drawbacks, emergence of new risk factors and their role in risk prediction, and finally use of hormone replacement therapy during menopause. Results demonstrate that menopause is a transition point for developing CVD not due to physiological changes only but psychosocial factors like depression and marital stress are also responsible. Both conventional and emerging risk factors burden are high among postmenopausal women. Though data regarding CVD risk assessment among postmenopausal population is lacking but existing evidences claimed underestimation or overestimation of risk among women. Moreover application of different tools on same population has revealed significant variation in result. In this regard, recalibration of conventional tools with local data and new risk factors has showed improvement of risk prediction. Hormone replacement therapy during early menopause has reported beneficial to prevent CVD but in secondary prevention it has no role. All of these findings demand further studies on cardiovascular risk assessment, especially in developing countries where women after menopause are not in consideration of health strategy makers.

Surgical smoke is produced by energy-based surgical instruments. The airborne volatile organic compounds (VOCs) from surgical smoke may have potential health risk. This study aimed to evaluate the evidence for the harmful effects on the operating theater staff. An internationally recognized evaluation model of health risk assessment (HRA) was adapted to preliminarily assess the health risks caused by VOCs in surgical smoke. Results of HRA indicated that non-carcinogenic risk indexes of VOCs did not exceed one, indicating that these pollutants didn't cause significant non-carcinogenic harm to the health of the operating theater staff. But the cancer risk indexes exposed to formaldehyde and benzene all exceed 10-5, which was higher than the suggested value of USEPA (10-6) and might cause potential harm to the health of the operating theater staff. Long-term exposure of such surgical smoke will be harmful to the health of the operating theater staff and have a great risk of cancer.

Considering characteristics of high river density, special underlying surface in plain river network region, and municipal drainage system function, river network drainage unit model is proposed, which is defined as a region surrounded by main river or embankment. Flood storage variety and control projects regulation of small rivers in each unit is simulated. With drainage catchment as an object, according to its drainage capacity, simplified municipal drainage model was developed. Coupling river network drainage unit model, simplified municipal drainage model and 2D flood routing model, urban flood analysis model for plain tidal river network region was developed, which could be applied to analyzing flood from upstream river, storm surge and local rainfall. Demonstration research was carried out in Puxi flood protected area in Shanghai.

This research focuses on the use of the HEC-RAS model to estimate flash flood risk. It combines advanced hydraulic modeling techniques and precise data entry. The aim is to contribute knowledge to assess flash flood risk and reduce impacts on communities and infrastructure. The selection of study areas with a history of severe flooding, such as the Lam Saphung Basin, Phrom River Basin, and Lam Chern River Basin Part 1 in Thailand, highlights the importance of thorough flash flood risk assessment. By leveraging the HEC-RAS model, the results of this research inform proactive risk management strategies, improve emergency preparedness and help develop sustainable mitigation measures. The results are important in developing emergency response strategies and overall recovery ability in areas at risk of flash floods. The research combines advanced hydrologic modeling and real-world flash flood data. In addition to the flood condition assessment, the extent of the flood area and associated hazards were assessed using a two-case simulation strategy. The study covers future scenarios related to land use changes and retrospective analysis of past flood events. The results have practical implications for improving emergency response strategies, land use planning, and overall resilience in flash flood-prone areas. The integrated approach emphasizes the research output to providing insights and actionable solutions for communities facing ongoing challenges posed by flash floods.

Blockchain is a shared, unchangeable, decentralized ledger that allows transactions to be recorded securely and transparently via a network of computers. In addition to its significant contributions to cryptocurrencies, blockchain technology has shown promise as a game-changing advancement in cyber security. This study offers a thorough analysis of how blockchain technology is strongly linked to defending against cyber security risks in the modern world. This research clarifies the primary mechanisms of decentralization, immutability, transparency, and cryptographic security by which blockchain improves cyber security through a review of the literature and case studies. Furthermore, the study addresses the difficulties and constraints associated with incorporating blockchain technology into cybersecurity frameworks and proposes potential directions for future research.

Dry periods and drought are inherent natural occurrences. However, due to the increasing pressures of global warming and climate change, these events become more frequent and severe on a global scale. These phenomena can be traced with various indicators and related indices proposed by various scholars. In general, drought risk assessment is done by modelling these indicators and determining the drought occurrence probabilities. The proposed adaptation introduces the "Kaplan-Meier Estimator," a non-parametric statistic traditionally used in medical contexts to estimate survival functions from lifetime data. The study aims to repurpose this methodology to assess drought risk by treating past droughts as "events" and evaluating the Standardized Precipitation Index (SPI) and Standardized Precipitation Evapotranspiration Index (SPEI) and map these results for a better understanding of the drought risks within larger spatial scales such as a river basin. The adapted method provides the probability of non-occurrence, with inverted results indicating the likelihood of drought occurrence. As a case study, the method is applied to SPI and SPEI values at different time steps (3, 6, and 12 months) across 27 meteorological stations in the Gediz River Basin, located in Western Turkey—a region anticipated to be profoundly affected by global climate change. The results are represented as the generated drought risk maps and curves, which indicate that (i) drought risks increase as the considered period extends, (ii) drought risks decrease as the utilized indicator timescales increase, (iii) locally plotted drought curves indicate higher drought risks as their initial slope get steeper. The method used enables the generation of historical evidence based spatially distributed drought risk maps which expose more vulnerable areas within the river basin.

Phytoplasma diseases pose a substantial threat to diverse crops of agricultural importance. Management measures are usually implemented only after the disease has already occurred. Early detection of such phytopathogens, prior to disease outbreak, has rarely been attempted but would be highly beneficial for phytosanitary risk assessment, disease prevention and mitigation. In this study we present the implementation of a recently proposed proactive disease management protocol (DAMA: Document, Assess, Monitor, Act) for a group of vector-borne phytopathogens. We used insect samples collected during a recent biomonitoring program in southern Germany to screen for the presence of phytoplasmas. Insects were collected with Malaise traps in different agricultural settings. DNA was extracted from these mass trap samples and subjected to PCR-based phytoplasma detection and COI sequence metabarcoding. In about 1% of the analyzed samples, phytoplasma DNA was detected. Phytoplasma group identification was performed by 16S rRNA gene sequence analysis and the detected phytoplasmas could be assigned to the 16SrI subgroups B and L. Insect species in the sample were identified by DNA metabarcoding. By using established databases, checklists, and archives, we documented historical associations and records of phytoplasmas and its hosts in the study region. For the assessment in the DAMA protocol, phylogenetic triage was performed in order to determine the risk for tri-trophic interactions (plant-insect-phytoplasma) and associated disease outbreaks in the study region. A phylogenetic heat map constitutes the basis for risk assessment and was used here to identify a minimum number of seven leafhopper species suggested to be monitored by stakeholders in this region. A proactive stance in monitoring changing patterns of association between hosts and pathogens can be a cornerstone in capabilities to prevent future phytoplasma disease outbreaks. To our knowledge, this is the first time that the DAMA protocol has been applied in the field of phytopathology and vector-borne plant diseases.

In its 8th Malaysia Plan (MP*), the Malaysian government has given nanotechnology development a high priority and has been made a Strategic Research (SR) programme. Consequently, an exhaustive and long-term approach is essential. Additionally, specific laws are required to provide an optimal health and safety environment for workers. Consequently, the current study intends to assist Malaysian policymakers in promoting improved safety, risk assessment, and management for nanotechnology workplaces, as well as drafting a comprehensive policy for the recently released DOSH guideline in 2018. Utilizing a unique methodology, this study evaluated the assessment and management of nanotechnology health and safety risks in Malaysia using the international risk governance council (IRGC) framework. In addition to document analysis, n = 20 semi-structured interviews were conducted with representatives of several nanotechnology platforms to collect data that was then analyzed thematically. The research evaluated current workplace safety regulations and laws. Consequently, we propose a future dynamic strategy for Malaysian nanotechnology with more favourable upgrades supported by increased concentrations in the following areas: I policy creation, ii) comprehensive management system, iii) knowledge transfer, and iv) infrastructure management. In addition, the findings highlight the need of cross-sectional communication in bridging existing gaps. This study laid the groundwork for a more systematic and comprehensive health and safety strategy.

The assessment of seismic risk in urban areas with high seismicity is certainly one of the most important problems that territorial managers have to face. A reliable evaluation of this risk is the basis for the design of both specific seismic improvement interventions and emergency management plans. Unappropriate seismic risk assessments may provide misleading results and induce bad decisions with relevant economic and social impact.The seismic risk in urban areas is mainly linked to three factors, namely, “hazard”, “exposure” and “vulnerability”. Hazard measures the potential of an earthquake to produce harm; exposure evaluates the amount of population exposed to harm; vulnerability represents the proneness of considered buildings to suffer damages in case of an earthquake. Estimates of such factors may not always coincide with the perceived risk of the resident population. The propensity to implement structural seismic improvement interventions aimed at reducing the vulnerability of buildings depends significantly on the perceived risk.This paper investigates on the difference between objective and perceived risk and highlights some critical issues. The aim of this study is to calibrate opportune policies, which allow addressing the most appropriate seismic risk mitigation options with reference to current levels of perceived risk. We propose the introduction of a Seismic Policy Prevention index (SPPi). This methodology is applied to a case-study focused on a densely populated district of the city of Catania (Italy).

Urban flood risk mapping is an important tool for the mitigation of flooding in view of human activities and climate change. Many developing countries, however, lack sufficiently detailed data to produce reliable risk maps with existing methods. Thus, improved methods are needed that can improve urban flood risk management in regions with scarce hydrological data. Given this, we estimated the flood risk map for Rasht City (Iran), applying a composition of decision-making and machine learning methods. Flood hazard maps were produced applying six state-of-the-art machine learning methods such as classification and regression trees (CART), random forest (RF), boosted regression trees (BRT), multivariate adaptive regression splines (MARS), multivariate discriminant analysis (MDA), and support vector machine (SVM). Flood conditioning parameters applied in modeling were elevation, slope angle, aspect, rainfall, distance to river (DTR), distance to streets (DTS), soil hydrological group (SHG), curve number (CN), distance to urban drainage (DTUD), urban drainage density (UDD), and land use. In total, 93 flood location points were collected from the regional water company of Gilan province combined with field surveys. We used the Analytic Hierarchy Process (AHP) decision-making tool for creating an urban flood vulnerability map, which is according to population density (PD), dwelling quality (DQ), household income (HI), distance to cultural heritage (DTCH), distance to medical centers and hospitals (DTMCH), and land use. Then, the urban flood risk map was derived according to flood vulnerability and flood hazard maps. Evaluation of models was performed using receiver-operator characteristic curve (ROC), accuracy, probability of detection (POD), false alarm ratio (FAR), and precision. The findings showed that the CART method is most accurate method (AUC = 0.947, accuracy = 0.892, POD = 0.867, FAR = 0.071, and precision = 0.929). The results also demonstrated that DTR, UDD, and DTUD played important roles in flood hazard modeling; whereas, the population density was the most significant parameter in vulnerability mapping. These findings indicated that machine learning methods can improve urban flood risk management significantly in regions with limited hydrological data.

Disasters, whether natural or human-induced, pose significant threats to human lives, property, and infrastructure. This study examines the effectiveness of search and rescue (SAR) dogs in locating survivors during disasters, with a focus on the experiences in Serbia, Croatia, and Slovenia. The primary goals are to evaluate training protocols, operational challenges, success rates, and the overall impact of SAR dogs in disaster scenarios. The findings indicate that SAR dogs greatly enhance the efficiency of disaster response operations. Their superior sense of smell, agility, and ability to manoeuvre through complex terrains make them crucial for quickly locating survivors. However, the performance of SAR dogs is affected by various factors, including the quality of their training, environmental conditions, and the coordination between handlers and dogs. The research highlights several challenges encountered by SAR dogs, such as extreme weather conditions, hazardous terrains, fatigue, and psychological stress. Additionally, limited resources and inconsistent training standards can hinder their effectiveness. The study underscores the importance of standardized training protocols, increased resource allocation, and better coordination among SAR teams. By addressing these challenges, the efficiency of SAR dogs can be further optimized, resulting in more effective disaster responses and higher survival rates. SAR dogs play an essential role in disaster management in Serbia, Croatia, and Slovenia. Ongoing investment in their training and welfare, along with improved operational protocols, will ensure their crucial contribution to saving lives during disasters. This study contributes to a broader understanding of the effectiveness of SAR dogs and provides practical recommendations for enhancing disaster response strategies.

It is critical to keep abreast of emerging dangers in the constantly changing field of cyber security. As 2024 approaches, numerous technological developments and trends are changing how businesses handle cyber security. This article explores the cutting edge of cyber security developments that are expected to rule in 2024. The field of cyber security is undergoing a revolution, from the adoption of Zero Trust Architecture (ZTA) as the new paradigm to the integration of AI and ML for real-time threat detection. Solutions for Extended Detection and Response (XDR) are becoming the mainstay for thorough threat detection and response in a variety of contexts, including networks, endpoints, and cloud environments. The use of biometric authentication techniques is growing in popularity because they provide better access control and identity verification. Concurrently, Deception Technologies are altering defensive tactics by using fictitious assets to trick and identify attackers at an early stage. Quantum-resistant cryptography, which aims to protect sensitive data from future quantum attacks, is on the horizon given the threat posed by quantum computing. Furthermore, the growing number of linked devices emphasizes how critical it is to strengthen IoT security protocols. Moreover, as long as companies are using cloud computing, they must make sure that strong cloud security protocols are in place. Simultaneously, the emergence of containerization technologies demands a targeted strategy for containerized environment security. Organizations must adopt these practices and strengthen their defenses against new threats as the cyber security landscape changes. Businesses may confidently and resiliently traverse the complex cybersecurity landscape of 2024 by remaining aware and implementing proactive security measures.

In recent years, rainfall-induced waterlogging has become a common hazard in the highly urbanized coastal city of Chattogram, Bangladesh resulting in high magnitude of property damage and economic loss. Therefore, the primary objective of this research is to prepare a waterlogging inventory map and understand the spatial variation of the risk by means of hazard intensity, exposure, and vulnerability of waterlogging. In this research, the inventory map and factors influencing waterlogging hazard were determined from a participatory survey and other spatial data including land elevation, population, and structural data were collected from secondary sources. Analytical Hierarchy Process was applied to measure the hazard intensity and the exposure and vulnerability were estimated by overlaying the spatial data onto the hazard intensity map. A total of 58 locations in 22 wards have been identified as waterlogging affected, which covers ~8.42% of the city area. Obtained waterlogging vulnerability index map suggests that ward no. 5, 6, 16, 17, and 33 are greatly vulnerable to waterlogging in terms of their social, infrastructure, critical facilities, economic and environmental vulnerability. We show that ~2.71% of the study area is at very high risk, while the risk score is considerably higher for ward no. 5, 8, 17, 19, and 33.

The coronavirus disease 2019 (COVID-19) pandemic, caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has spread rapidly to most parts of the world, causing high numbers of deaths and significant social and economic impacts. SARS-CoV-2 is a novel coronavirus with a suggested zoonotic origin and with the potential for cross-species transmission among animals. Antarctica can be considered the only continent free of SARS-CoV-2 although at the end of the 2019-2020 tourist season, at least one SARS-CoV-2 positive tourist visited the Antarctic Peninsula. Therefore, concerns have been expressed regarding the potential human introduction of this virus to the continent through the activities of research or tourism with potential effects including those related to human health, but also the potential for virus transmission to Antarctic wildlife. This reverse-zoonotic transmission risk to Antarctic wildlife is assessed considering the available information on host susceptibility, dynamics of the infection in humans, and contact interactions between humans and Antarctic wildlife. Measures to reduce the risk are proposed as well as the identification of knowledge gaps related to this issue.

The rapid changes in technology on a global scale, combined with the widespread adoption of business operations in cyberspace, have intensified the need for robust protection against escalating risks posed by cyber threats. This research paper aims to identify fundamental cyber resilience management attributes that enable organizations to manage cybersecurity, sustain, and adapt amidst evolving cyber risks and threats. By integrating resilience theory and security theory, this study establishes the attributes for resilience within cyber domains, making a novel contribution to cyber resilience management in organizations. The study introduces a model featuring seven main variables: Rationale, Reliable, Readiness, Resistance, Robust, Rebound, Reflective, and sub-variables across the Physical, Logical, and Social cyber domains, providing a converged framework for achieving cyber resilience. The findings of the study highlight the significance of fundamental attributes for enhancing cyber resilience management in organizations, such as clarity in purpose, vision, and values for security management, an empowered culture, availability of resources, avoidance of single points of failure, development, and coordination of resources to respond to threats and risks, promotion of continual improvement, and the sharing of information and knowledge. In conclusion, this research paper presents a model for managing cybersecurity in organizations by identifying key attributes for achieving cyber resilience.

To ensure sustainability of the future power grid, the rate of expansion of distributed renewable energy resources (DRER) has introduced operational challenges. These includes managing transmission constraints with DRER power injection, dispatching DRER efficiently, managing system frequency and ensuring sufficient reactive power for voltage support. Coupled with the intensification of wildfires, power infrastructure across the United States faces challenges to minimize the impact to maintain system reliability and resiliency. This research embarks on a comprehensive evaluation, beginning with an in-depth historical analysis to delineate regions most susceptible to wildfires. Utilizing a multidimensional approach, the study assesses wildfire-induced risks to power grids, by integrating historical wildfire occurrences, real-time wildfire proximities, Moderate Resolution Imaging Spectroradiometer (MODIS) derived vegetation metrics, and system parameters, by employing Principal Component Analysis (PCA) based optimal weights, leading to the formulation of a novel risk factor model. This risk factor has the potential to be the key to ensuring the resilience of a renewable-rich smart grid when faced with a severe weather event. Our model’s applicability was further verified through an empirical assessment, selecting representative networks from diverse regions, providing insights into the geographical variability of risk factors. Ultimately, this study offers stakeholders and policymakers a comprehensive tool-set, empowering decisions regarding infrastructure investments, grid reinforcements, and strategic power rerouting to ensure consistent energy delivery using risk assessment against wildfire.

This paper proposes a model that combines multi-criteria and multi-faceted risk assessment. Using two data sources, a fuzzy Technique for Order of Preference by Similarity to Ideal Solution FTOPSIS method combined with FMEA assessment. The FMEA method presented in this paper combines the technique of prioritising preferences according to FTOPSIS similarity to the ideal solution and conviction structure to overcome the defects of traditional FMEA indicators. The paper describes the exact process and tool selection, and the results obtained in the study verified accurate data. Finally, a numerical case study was presented on hospital reorganization services and case adaptation to prioritize surgical abandonment in Poland. The problem considered in the publication is the priority of patients’ operations in hospitals. The selection of relevant criteria, their importance and patient preferences are presented. The results obtained from the method provide a viable action plan for the proposed research problem. The proposed method is multi-faceted and can be part of an information system supporting reorganization, restructuring, and modification of the operational process.

AbstractPurpose: This study aimed to perform a psychometric evaluation of the preliminary preterm birth risk assessment scale (PBRAS-K) of 32-item. Method(s): There were 299 subjects, 167 in the exploratory factor analysis (EFA) group and 132 in the confirmatory factor analysis (CFA) group, who delivered before 37⁺⁰ weeks after having preterm symptoms and were admitted to high-risk pregnancy maternal-fetal intensive care units (MFICU). After an item reduction process in EFA, the psychometric property scales were assessed using SPSS 26, and CFA was accomplished using AMOS 27. Results: The Kaiser-Meyer-Olkin measure (KMO) and Bartlett’s χ² test of sphericity confirmed the adequacy of the sample for factor analysis (KMO = .81 (> .80), χ² = 1841.38, p < .001). The final version of the PBRAS-K was comprised of 23 items within seven dimensions. Factor analysis identified items explaining 65.9% of the total variance. The PBRAS-K had a mean score of 35.58 (±10.35) and showed a high internal consistency and satisfactory reliability with a Cronbach’s alpha of .85. The PBRAS-K had a low correlation with risk scoring of preterm delivery (RPD) for discriminant validity (r = .45, p < .001), a positive, high correlation with the Somatic Awareness Scale with Spontaneous Preterm Labor (SPL-SAS) for criterion validity (r = .65, p < .001), and with pregnant stress for convergent validity (r = .57, p < .001). RPD and SPL-SAS were moderately correlated (r = .53, p < .001). Conclusion(s): The PBRAS-23-K is a valid and reliable instrument for assessing pregnant women’s risk of preterm birth. Clinical nurses are encouraged to apply and obtain information for effective interventions in MFICU. This scale has meaningful results and reflects the voices of women who had a preterm birth. The scale should be evaluated for standardization and cut-off scores using larger subject sizes in the future.

Reassessment of the fatigue life for wind turbines structural components is typically performed using deterministic methods with the same partial safety factors as used for the original design. However, in relation to life extension, the conditions are generally different from the assumptions used for calibration of partial safety factors; and using a deterministic assessment method with these partial safety factors might not lead to optimal decisions. In this paper, the deterministic assessment method is compared to probabilistic and risk-based approaches, and the economic feasibility is assessed for a case wind farm. Using the models also used for calibration of partial safety factors in IEC61400-1 ed. 4 it is found that the probabilistic assessment generally leads to longer additional fatigue life than the deterministic assessment method. The longer duration of the extended life can make life extension feasible in more situations. The risk-based model is applied to include the risk of failure directly in the economic feasibility assessment and it is found that the reliability can be much lower than the target for new turbines, without compromising the economic feasibility.

Social distancing is a recommended solution by the World Health Organisation (WHO) to minimise the spread of COVID-19 in public places. The majority of governments and national health authorities have set the 2-meter physical distancing as a mandatory safety measure in shopping centres, schools and other covered areas. In this research, we develop a Deep Neural Network-based Model for automated people detection, tracking, and inter-people distances estimation in the crowd, using common CCTV security cameras. The proposed DNN model along with an inverse perspective mapping technique leads to a very accurate people detection and social distancing monitoring in challenging conditions, including people occlusion, partial visibility, and lighting variations. We also provide an online infection risk assessment scheme by statistical analysis of the Spatio-temporal data from the moving trajectories and the rate of social distancing violations. We identify high-risk zones with the highest possibility of virus spread and infection. This may help authorities to redesign the layout of a public place or to take precaution actions to mitigate high-risk zones. The efficiency of the proposed methodology is evaluated on the Oxford Town Centre dataset, with superior performance in terms of accuracy and speed compared to three state-of-the-art methods.

As the number of Small and Medium Enterprises (SMEs) rises in the world, the amount of sensitive data used also increases, making them targets for cyberattacks. SMEs face a host of issues such as lack of resources, and poor cybersecurity talent, resulting in multiple vulnerabilities that increase overall risk. Cybersecurity risk assessment frameworks have been developed by multiple organizations such as the National Institute of Science and Technology (NIST) and the International Organization for Standardization (ISO), but they are complicated to understand, and challenging to implement. This research aimed to create an effective cybersecurity risk assessment framework specifically for SMEs while considering their limitations. This was achieved by first identifying common threats and vulnerabilities and categorizing them according to their importance, and risk. Secondly, popular frameworks like the NIST CSF and ISO 27001/2 were analyzed for their proficiencies and deficiencies while identifying relevant areas for SMEs. Finally, novel techniques catered to SMEs were explored and incorporated to create an effective framework for SMEs. This framework was also developed in the form of a tool, providing an interactive and dynamic environment. The tool was effective and the framework is a promising start but requires more quantitative analysis.

Genome-wide association studies (GWAS) have successfully revealed numerous susceptibility loci for obesity. PREDATORR study (2014) shows that in Romania, 34,6% of adults aged 20-79 y/o are overweight, 31,4% are obese with a high risk of cardiometabolic complications, a number that puts almost 67% of Romania's population in the abnormal weight group. Our study aims to investigate the current staus of genetic foundation in metabolic disease associated with obesity, applied to a pilot group of patients specifically examining the impact of known polymorphisms and their haplotype of six food intake-regulating genes: leptin (LEP), leptin receptor (LEP-R), serotonin receptor (5HTR2A), ghrelin (GHRL), neuropeptide Y (NPY) and fat-mass and obesity-associated (FTO) with the following polymorphisms: LEP A-2548G, LEPR A-223G, 5HTR2A G-1439A, GHRL G-72T, NPY T-29063C, FTO A-T and body mass index (BMI). A notable link between the LEP-2548 rs7799039 gene's AG genotype and the risk of obesity was observed, particularly pronounced in males aged 40-49, with an approximately sevenfold increased likelihood of obesity. The 5HTR2A rs6311 AA genotype was associated with a higher BMI, not statistically significant. The FTO rs9939609 gene's AA genotype emerged as a significant predictor of obesity risk. Besides these significant findings, no substantial associations were observed with the LEPR, 5HTR2A, GHRL and NPY genes. Haplotype association analysis showed a suggestive indication of GRGMLA (rs7799039, rs1137101, rs6311, rs696217, rs16139, rs9939609 sequence) haplotype with susceptibility effect towards obesity predisposition. Linkage disequilibrium (LD) analysis showed statistically significant associations between LEP and LEPR gene (p = 1e-04), LEP and GHRL gene (p = 0.0047), GHRL and FTO gene (p=0.03). The outcomes of this study, to our knowledge, one of the very few on the Romanian population, aimed to be a starting point for further research on the targeted interventional strategies to reduce cardiometabolic risks.

Recent reports have it that over 85\% of data breaches are still caused by the human element, of which healthcare is one of the suitable organizations mostly targeted by cybercriminals. The work of healthcare staff is often associated with high workloads, high emergency cases, and a broad range of psychological, social, and cultural factors. The significance of these factors could undermine conscious care information security (IS) practice leading to serious violations. This study comprehensively examined the correlation between the psycho-social-cultural factors, work factors with IS and privacy behaviour in a hospital that has fully adopted electronic health records (EHR) management system. The findings are to facilitate the decision-making process towards improving the cyber-security practice in healthcare. A quantitative approach was adopted where we collected responses from 212 healthcare staff through an online questionnaire survey. A broad range of constructs was selected from psychological, social, cultural perception and work factors based on earlier review work. These were therefore related to some security practices, to assess the IS knowledge, attitude and behaviour gaps among healthcare staff in a comprehensive way. From the study, IS self-reported conscious care behaviour (ISCCB) risk was relatively higher as compared to information security knowledge (ISK) risks and information security attitude (ISA) risk. Furthermore, the study revealed that work emergency has a positive correlation with ISCCB (r=1.95, p-value =0.001) risk. Conscientiousness also had positive correlation with ISCCB risk (r=0.157, p-value=0.05) however agreeableness negatively correlated with ISK risk (r=-0.166, p-value =0.05), and ISA risk (r=-0.140, p-value =0.05). Based on these findings, intrinsic and extrinsic motivation methods combined with cutting-edge technologies can be explored to discourage IS risks behaviours while enhancing conscious care security practice.