Background: The effect of velamentous cord insertion (VCI) on perinatal outcomes in twin pregnancies is unclear due to conflicting findings. This retrospective study aimed to examine VCI prevalence and related risk factors in twin pregnancies and its association with adverse perinatal outcomes. Methods: Women with twin pregnancies who delivered between January 2012 and December 2021 in a single tertiary hospital were included. The participants were divided into dichorionic (DC) and monochorionic diamniotic (MCDA) groups, and their maternal and fetal characteristics and VCI rates were compared. Logistic regression models were used to identify risk factors for VCI and VCI-related perinatal outcomes. Results: Among the 694 twin pregnancies included in this study, the VCI rate was significantly higher in MCDA than in DC twins. Body mass index and MCDA twins were significant risk factors for VCI, whereas assisted reproductive technology pregnancy was a significant protective factor against VCI. In DC twins, VCI did not affect perinatal outcomes. Conclusion: In MCDA twins, VCI was a significant risk factor for fetal growth restriction, twin-to-twin transfusion syndrome, and preterm birth at

The integrated DC-DC converter is appropriate for use in many domains, namely, display, cellular, and portable applications. This paper presents an integrated monolithic voltage-mode DC-DC boost converter with a low-power control circuit. The driver circuit requires an integrated converter to power up a digital logic circuit and converts the unregulated DC input to the controlled DC output at the desired voltage level. It is the integration of both power switches and control circuitry within the same CMOS technology to buck down and boost voltages using a switch mode regulator. In order to increase power efficiency in the DC-DC boost converter that provides low-power operation with a small chip size, a low-voltage operation is applied to the unique circuit characteristic. The operational transconductance amplifier(OTA), comparator, and oscillator in the control circuit are designed with the supply voltage of 3.3V and the operating frequency of 5.5 MHz. A compensator is used to create a pole that has sufficient phase margin for high stability. The DC- DC boost converter is measured in both experiment and simulation. Testing of the proposed circuit on the 0.35μm CMOS process shows that the output transient time of the amplifier can be controlled within of 7μsec and the output voltage is accurately controlled with a ripple ratio of 3%.

Glycosidic linkage analysis was conducted on the unfractionated polysaccharides in the alcohol-insoluble residues (AIRs) prepared from six red seaweeds (Gracilariopsis sp., Prionitis sp., Mastocarpus papillatus, Callophyllis sp., Mazzaella splendens, and Palmaria palmata) using GC-MS/FID analysis of partially methylated alditol acetates (PMAAs). The cell walls of P. palmata primarily contained mixed-linkage xylans and small amounts of sulfated galactans and cellulose. In contrast, the unfractionated polysaccharides of the other five species were rich in galactans displaying diverse 3,6-anhydro-galactose and galactose linkages with varied sulfation patterns. Different levels of cellulose were also observed. This glycosidic linkage method offers advantages for cellulose analysis over traditional monosaccharide analysis that is known for underrepresenting glucose in crystalline cellulose. Relative linkage compositions calculated from GC-MS and GC-FID measurements showed that anhydro sugar linkages generated more response in the latter detection method. This improved linkage workflow presents a useful tool for studying polysaccharide structural variations across red seaweed species. Furthermore, for the first time, relative linkage compositions from GC-MS and GC-FID measurements, along with normalized FID and total ion current (TIC) chromatograms without peak assignments, were analyzed using principal component analysis (PCA) as a proof-of-concept demonstration of the technique's potential to differentiate various red seaweed species.

Cerebral cavernous malformations (CCM) or familial cavernomatosis is a rare, autosomal dominant, inherited disease characterized by the presence of vascular malformations consisting of blood vessels with an abnormal structure in the form of clusters. Based on the altered gene (CCM1/Krit1, CCM2, CCM3) and its origin (spontaneous or familial), different types of this dis-ease can be found. In this work we have isolated and cultivated primary endothelial cells (ECs) from peripheral blood of a type 1 CCM patient. Differential functional and gene expression pro-file of these cells were analyzed and compared to primary ECs from a healthy donor. The muta-tion of the familial index case consisted of a heterozygous point mutation in the position +1 splicing consensus between exons 15 and 16, causing failure in RNA processing and in the final protein. Furthermore, gene expression analysis by quantitative PCR revealed a decreased ex-pression of genes involved in intercellular junction formation, angiogenesis, and vascular ho-meostasis. Cell biology analysis showed that CCM1 ECs were impaired in angiogenesis and cell migration. Taken together, the results obtained suggest that the alterations found in CCM1 ECs are already present in the heterozygous condition, suffering from vascular impairment and someway predisposed to vascular damage.

Abstract Introduction: In the last thirty years, brain neuromodulation techniques have been used as an alternative to pharmacological treatment of neurological disorders. Parkinson's disease (PD) is a neurodegenerative disorder leading to bradykinesia, rest tremor, postural changes, and non-motor symptoms such as depression, anxiety, sleep disorders, pain, and cognitive decline that compromises executive functions (EFs), responsible for the orderly execution of behaviors and tasks of daily life and intentional and directed actions. To this date, a few studies with transcranial direct current stimulation (tDCS) have shown beneficial effects in PD patients concerning specific motor and non-motor symptoms, targeting the motor cortex and/or prefrontal regions. Objective: The main objective of this study was to evaluate the effects of left prefrontal tDCS across a broad spectrum of motor and non-motor symptoms of PD using established validated scales. Method: Single-blind randomized clinical trial with 18 volunteers with PD, aged between 45 and 80 years (66.1 ± 9.65), who met inclusion and exclusion criteria. Participants were submitted to assessments of motor and non-motor functions employing psychometric scales and tests to evaluate EFs and were randomly divided into two groups: control (sham stimulation) and experimental (active stimulation). All participants were involved in three separate tDCS sessions. The anode was positioned over the left dorsolateral prefrontal cortex and the cathode over the right supraorbital region, with a direct current intensity of 2mA, lasting 20 minutes. At the end of the three sessions, all participants were reassessed. Results: Significant effects of tDCS on non-motor functions were observed for cognition (verbal fluency of actions, clock copy test, appointment by visual confrontation, and verbal memory with immediate free recall) and subjective assessment of sleep quality (overall restlessness and discomfort in the arms and legs at night, leg and arm cramps at night and distressing dreams). There was also an improvement in the rate of errors and successes for congruent and incongruent stimuli of the Stroop Test. The beneficial effects on motor function were decreased rigidity, improved gait, and greater agility in the finger-tapping test. Conclusion: Three tDCS sessions showed positive results for participants with PD, producing significant improvements in various motor and non-motor functions, including sleep quality, cognition, and EFs. Additionally, the present results indicate that tDCS neuromodulation of the left dorsolateral prefrontal cortex region is feasible, safe, and provides significant objective benefits for PD patients.

Day by day, the share of renewable energy-based power plants such as offshore wind farms and photovoltaic power plants, in the present-day power systems is escalating. Nevertheless, most of these power-producing facilities have been located quite far away from the load centers. At this stage, HVDC power systems provide satisfactory options due to qualities such as reduced line losses, substantial controllability, and environmental advantages. Nevertheless, unique converter designs are required to combine asynchronous HVDC networks with each other and with already existing high voltage alternating current (HVAC) networks. In this study, based on the above special cases, a unique DC-DC modular multilevel converter (MMC) architecture is presented that provides an excellent solution for both integrating modern asynchronous HVDC networks and integrating these modern HVDC power systems with existing asynchronous HVAC power systems. The mathematical analysis of the recommended DC-DC MMC design has been examined in detail and the power transfer between two asynchronous power grids has been realized in a simulation environment. Efficient bilateral power transmission has been made achievable by the control system. The recommended DC-DC MMC topology has shown to be a highly successful approach, in the interconnection of HVDC power systems, according to the simulation results.

Diagnosing skin lesions can be a challenging task. Dermatologic lesions are hard to differentiate especially for an untrained eye. However, carefully analyzing every aspect of the lesion can help clinicians reach an accurate diagnosis. If diagnosed correctly with the naked eye, many lesions can be treated without the need for further histopathology or investigations. Those aspects include morphology, color, distribution, configuration and arrangement, texture and consistency, and any evolutions or changes within the lesion. Clinicians must also contextualize those lesions into the patient’s history and overall systemic symptoms and signs. Risk factors should be taken into consideration and whether there are evolutionary changes in the lesions. Clinicians should also look for patterns as they might be the key to diagnosis. If definitive diagnosis is still not reached, biopsy, dermatoscopy, cultures, skin scrapings, patch testing, blood tests, and imaging studies may be necessary for confirmation. Integrating these methods with clinical judgment and patient history significantly enhances the accuracy of diagnosis in dermatology. Treatment for dermatologic lesions varies depending on the underlying cause.

Antler is the fastest growing tissue. Because is based on proto-oncogenes, to avoid the risk of cancer, antlers evolved strong anticancer mechanisms, and thus its extract (DVA) is effective also against the few human tumours studied so far. We assessed whether DVA is a general anticancer compound testing direct effects in cells of different tumours: glioblastoma (GBM), colorectal and breast cancer, and leukaemia. DVA reduced viability of tumour but not healthy cells. Mobility decreased at least at the longest test (72 h). Intraperitoneal/oral 200 mg DVA/kg administration in GBM xenograft mice for 28 d reduced tumour weight 66.3% and 61.4% respectively, and also spleen weight. In addition, tumours treated with DVA showed symptoms of liquefactive necrosis. Serum cytokines showed DVA up-regulated factors related with tumour fighting and down-regulated those related with inducing immune tolerance to the tumour. DVA shows general anticancer effects in the lines tested and, in GBM mice, also strong indirect effects apparently mediated by the immune system.

Objective: To evaluate the direct costs of treating patients with neuromyelitis optica spectrum disorders (NMOSD) in outpatient care, from a hospital and Unified Health System (SUS) perspective. Methods: Observational study with data collection by microfunding, carried out with patients diagnosed with neuromyelitis optics, treated at a university hospital, in the city of Rio de Janeiro. Mann-Whitney tests were performed to measure cost differences between patient groups by disease severity and analysis perspective. Results: Nine individuals with a median age of 48 years (IQR 30 - 59 years) were included. The median total costs for patients with greater severity from the perspective of the SUS and the hospital were R$ 21,638.22 (IIQ: R$ 15,614.63; R$ 25,985.32) and R$ 32,094.11 (IIQ: R$ 25,610 .60; R$ 38,617.25) respectively. For patients with moderate severity the median was R$ 7,339.85 (IIQ: R$ 6,235.45; R$ 11,912.05) from the SUS perspective and R$ 11,505.80 (IIQ: R$ 7,339.85; R$ 22,424.76) from the perspective of the hospital, where the use of medications had a major impact. Conclusion: The main cost drivers were medicines, especially those used off-label, and procedures.

A space charge density wireless measurement system based on the idea of distributed measurement is proposed for collecting and monitoring the space charge density in an ultra-high-voltage direct-current (UHVDC) environment. The proposed system architecture is composed of a number of wireless nodes connected with space charge density sensors and a base station. The space charge density sensor based on atmospheric ion counter method is elaborated and developed, and the ARM microprocessor and Zigbee radio frequency module are applied. The wireless network communication quality and the relationship between energy consumption and transmission distance in the complicated electromagnetic environment is tested. Based on the experimental results, the proposed measurement system demonstrates that it can adapt to the complex electromagnetic environment under the UHVDC transmission lines and can accurately measure the space charge density.

Inadequately managed agricultural waste significantly impacts the environment, health, and economy. This form of pollution arises from the underutilization, poor awareness, and insufficient treatment of agricultural waste. Fruit and vegetable wastes are valuable sources of bioactive compounds. This study aims to revalorize discarded waste from red habanero chili peppers (Capsicum chinense) by extracting bioactive compounds through different extraction processes: maceration (ME), maceration assisted by ultrasound (US), Soxhlet extraction (SE), supercritical fluid extraction (SFE), and supercritical fluid extraction with a co-solvent (SFEC). Extraction processes have significant effects on extraction efficiency and phytochemical profile (capsaicinoids and carotenoids recovery). The results indicate that the highest efficiency process is obtained with SFEC, also a high phytochemicals recovery (14.9 mg of total capsaicinoids and total carotenoids 292.09 µg per gram of sample). Concerning to phytochemical profile in the extract, the maceration process gets the highest concentration of compound followed by US and SFEC. These data reveal that the use of SFE and SFEC extraction is recommended for extraction of phytochemicals with biologically activity from red habanero chili pepper waste for diverse industries application.

As the search for exoplanets continues, more are being discovered orbiting Red Giant stars. We use current data from the NASA Exoplanet Archive to investigate planet distribution around Red Giant stars and their presence in the host’s habitable zone. As well, we explore the distribution of planet mass and orbital semi major axis for evolved stars with increasing stellar radii. We found 9 Red Giant-hosted exoplanets, and 21 Subgiant-hosted exoplanets to be in the optimistically calculated habitable zone, 5 and 17 of which are in a more conservatively calculated habitable zone. All the planets detected within their habitable zone orbit stars that are in early stages of evolution. We believe that with more powerful instrumentation, more habitable planets may be found around stars that are in later stages of evolution.

Plasmonic sensors exploiting the Localized Surface Plasmon Resonance (LSPR) of noble metal nanoparticles are common in the visual spectrum. However, for bio-sensors the near infra-red (NIR) windows (600 nm – 900 nm and 1000 nm -1400 nm) are of interest, as it is a region where the absorption coefficient of water, melaninm deoxy- and hemoglobin are all low. The first part of this paper reviews the work that has been undertaken on using gold (Au) and silver (Ag) particles in Metal Enhanced Fluorescence (MEF) in the NIR. Despite this success there are limitations, as there is only a narrow band in the visual and NIR where losses are low for traditional plasmonic materials. Further, noble metals are not compatible with standard silicon manufacturing processes, making it challenging to produce on-chip integrated plasmonic sensors with Au or Ag. Therefore, it is desirable to use different materials for plasmonic chemical and biological sensing, that are foundry-compatible with silicon (Si) and germanium (Ge). One material that has received significant attention is highly doped Ge which starts to exhibit metallic properties at a wavelength as short as 6 μm. This is discussed in the second part of the paper and the results of recent analysis are included.

The main focus of the in vitro toxicity assessment methods is on the viability of the cells, which is usually based on metabolism changes. Yet, when exposed to toxic substances, the cell triggers multiple signals in response. With this in mind, we have developed a promising cell-based toxicity method that observes various cell responses when exposed to toxic substances (either death, division or remaining viable). Based on the collective cell response, we observed and predicted the dynamics of the cell population to determine the toxicity of the toxicant. The method was tested with two different conformations: In the first conformation, we exposed a monoculture model of blood macrophages to UV light, hydrogen peroxide, nutrient deprivation, tetrabromobisphenol A, fatty acids and 5-fluorouracil. In the second, we exposed a coculture liver model consisting of hepatocytes, hepatic stellate cells, Kupffer cells and liver sinusoidal endothelial cells to rifampicin, ibuprofen and 5-fluorouracil. The method showed good accuracy compared to established toxicity assessment methods. In addition, this approach provided more representative information on the toxic effects of the compounds as it considers the different cellular responses induced by toxic agents.

We studied surface enhanced Raman spectra of amino acids D-alanine and DL-serine and their mixture on silver nanoisland films (SNF), immersed in phosphate buffer saline solution at millimolar amino acid concentrations. It is shown that the spectra from the amino acid solutions differ from the reference spectra for microcrystallites due to electrostatic orientation of amino acid zwitterions by the metal nanoisland film. Moreover, non-additive peaks are observed in the spectrum of the mixture of amino acids adsorbed on SNF, which means that intermolecular interactions between adsorbed amino acids are very significant. The results indicate the need for a thorough analysis of the Raman spectra from amino acid solutions in the presence of a nanostructured metal surface, and may also be of interest for studying molecular properties and intermolecular interactions.

Carcinogenesis is the process whereby a normal cell is transformed into a neoplastic cell. This action involves several steps starting with initiation and followed by promotion and progression. Driving these stages are oxidative stress and inflammation, which in turn encompasses a myriad of aberrant gene expressions, both within the transforming cell population and the cells within the surrounding lesion. Chemoprevention of cancer with bioreactive foods or their extracted/purified components occurs via normalizing these inappropriate gene activities. Various foods/agents have been shown to affect different gene expressions. In this review we discuss whereby the chemoprevention activities of the red beetroot itself may disrupt carcinogenesis and the activities of the water soluble betalains extracted from the plant.

As the additive manufacturing industry grows, it is compounding the global plastic waste problem. Distributed recycling and additive manufacturing (DRAM) offers an economic solution to this challenge, but it has been relegated to either small-volume 3D printers (limiting waste recycling throughput) or expensive industrial machines (limiting accessibility and lateral scaling). To overcome these challenges, this paper provides proof-of-concept for a novel open-source hybrid 3D printer that combines a low-cost hanging printer design with a compression screw-based end-effector that allows direct extrusion of recycled plastic waste in large expandable printing volumes. Mechanical testing of the resultant prints from 100% waste plastic, however, showed that combining challenges of non-uniform feedstocks and a heavy printhead for a hangprinter reduced the strength of the parts compared to fused filament fabrication. The preliminary results are technologically promising, however, and provide opportunities to improve on the open source design to help process the volumes of waste plastic needed for DRAM to address the negative environmental impacts of global plastic use.

Leigh Van Valen was an American evolutionary biologist who made major contributions to evolutionary theory and is particularly remembered by his groundbreaking paper "A New Evolutionary Law" (1973) where he provided evidence from fossil record data that this law maintains that the probability of extinction within any group remains es­sentially constant through time. In order to explain such unexpected result, Van Valen formulated a very influential idea that he dubbed the "Red Queen hypothesis". It states that the constant decay must be a consequence of evolutionary interactions among connected species within ecological networks. In Van Valen's picture, species do not merely evolve: they also coevolve with other species. As a consequence, when thinking in adaptation to an external environment, the other species must be considered as part (may be a major part) of such external world. Van Valen's law provided the first complex systems theory of coevolutionary dynamics and inspired a whole range of theoretical and experimental developments and scholars from very diverse fields, from economics to physics. In that respect, Leigh Van Valen's contribution percolated far beyond its original formulation. Red Queen arms races are nowadays considered a widespread feature of complex adaptive systems.

The new regulation was introduced to the franchise market of South Korea in that an applicant who wants to be a franchiser must set up direct retail stores and run them for at least one year before recruiting franchisees. Considering the purpose of the regulation, it is inferred that once franchisers run their own stores, their franchisees would be better off than otherwise. This paper addresses one reason that the Korea Fair Trade Commission has no choice but to introduce the regulation. Along the line, this paper investigates whether franchisees would have the more likelihood to make profit in the case of that franchisers operate their own stores. The result demonstrates that this case could be true since the operation of franchiser owned stores could be helpful in reducing cost of franchisees.

Energy and information are fundamental concepts that play crucial roles in the foundations of science, each contributing to different aspects of our understanding of the natural world. Here we encounter that Fisher' measure is able to link them. We also investigate some interesting relations between Fisher's information, Poisson's distribution, and thermal quantifiers in a grand canonical ensemble. These connections permit one to visualize interesting novel artifacts in statistical mechanics. We clearly see them emerge in discussing the ideal gas. For example, we encounter that the Poisson distribution is intrinsically involved in the physics of the ideal gas, and we are able to give a Fisher-estimation of the difference in informational content between the grand canonical and canonical ensembles.

This paper discusses corporate taxes and Foreign Direct Investment (FDI) in Nigeria. It is a review of literature that attempts to explore and give a reality on the response of FDI to corporate taxes. This paper shows in its introductory phase a prior discussion of the terms corporate tax and FDI and also elements of both terms and classifications. It follows with issues such as the effects of corporate taxes on FDI. This paper discusses the rhetoric whether reduced corporate taxes and other tax incentives has an effect on the inflow of FDI in Nigeria. To answer this question, the paper utilised information gathered from secondary sources including books, newspapers publications, working papers and research findings from studies. This paper shows that from surveyed empirical studies corporate taxes may have an important role in attracting FDI and have a rising effect on the development of the country, and as such recommends that tax incentives should be employed as a means to attracting FDI, a cost benefit analysis should be employed on the types of corporate taxes to determine the benefit from the perceived FDI inflow, in addition a review of the current tax policies should be carried out as they seem not to respond to the current economic situation.

Background: Inflammasomes recognize cytosolic danger signals, including pathogens, and subsequently induce the secretion of pro-inflammatory cytokines, such as interleukin (IL)-1β. Studying inflammasomes in the red fox (Vulpes vulpes) is crucial from a wildlife veterinary and public health perspective, as it can be used to help control and prevent the transmission of zoonotic pathogens. The understanding of how diversity in inflammasomes across species affects pathogen carriage in the red fox is still limited. Methods: We investigated the activation and intracellular mechanisms of three inflammasomes (NLRP3, AIM2, and NLRC4) in fox peripheral blood mononuclear cells (PBMCs), using established triggers and inhibitors derived from humans and mice. Results: Fox PBMCs exhibited normal activation and induction of IL-1β secretion in response to representative inflammasome triggers (ATP and nigericin for NLRP3, dsDNA for AIM2, flagellin for NLRC4). However, in inhibitor studies, MCC950, a selective NLRP3 inhibitor, suppressed IL-1β secretion mediated by the fox AIM2 and NLRC4 inflammasomes. Conclusions: These findings suggest that NLRP3 may have a common role in dsDNA- and flagellin-mediated inflammasome activation in the red fox. In conclusion, this fox inflammasome biology can be applied to the control of zoonotic infections and the treatment of inflammasome-mediated diseases in the red fox.

A non-negligible fraction of quasars are red at optical wavelengths, indicating (in the vast majority of cases) that the accretion disc is obscured by a column of dust which extinguishes the shorter-wavelength blue emission. In this paper we summarise recent work by our group, where we find fundamental differences in the radio properties of SDSS optically selected red quasars. We also present new analyses, using a consistent colour-selected quasar parent sample matched to four radio surveys (FIRST, VLA Stripe 82, VLA COSMOS 3 GHz and LoTSS DR1) across a frequency range 150 MHz-3 GHz and four orders of magnitude in radio flux. We show this enhancement is driven by systems with small-scale radio emission (∼kpc) and peaks around the radio-quiet threshold (defined as the ratio of 1.4 GHz luminosity to 6μm luminosity) across the four radio samples. Exploring the potential mechanisms behind this enhancement, we rule out star-formation and propose either small-scale jets or dusty winds interacting with the interstellar medium; this will be tested in detail using new multi-band uGMRT data. Overall our results cannot be explained with a simple viewing angle hypothesis, and so may point towards red quasars representing a key phase in the evolution of galaxies.

Since the early 1980s, a large number of research works on enzymes from the red king crab hepatopancreas have been conducted. These studies have been relevant both from a fundamental point of view for studying the enzymes of marine organisms and in terms of the rational management of nature to obtain new and valuable products from the processing of crab fishing waste. Most of these works were performed by Russian scientists due to the area and amount of waste of red king crab processing in Russia (or the Soviet Union). However, the close phylogenetic kinship and the similar ecological niches of commercial crab species and the production scale of the catch provide the bases for the successful transfer of experience in the processing of red king crab hepatopancreas to other commercial crab species mined worldwide. This review describes the value of recycled commercial crab species, discusses processing problems, and suggests possible solutions to these problems. The main emphasis is placed on the enzymes of the hepatopancreas as the most highly salubrious product of waste processed from red king crab fishing.

The reagents and raw materials used, as well as the products obtained (bio-oil, reaction condensates, polyols and sugar phases) were characterized by elemental analysis, infrared spectroscopy, thermogravimetry and high performance liquid chromatography with mass spectrometry. The heating value of the bio-oils is higher than that of the original biomass (higher heating value of Eucalyptus sawdust bio-oil 29 MJ/kg versus 19.5 MJ/kg of the original Eucalyptus sawdust). The analyses of the bio-oils allowed to identify the presence of high added-value compounds, such as levulinic acid and furfural. Finally, a study of the accelerated aging of the liquefied biomass showed that the biofuel density increases with the storage time due to the occurrence of repolymerization reactions.

Carbon dots (C-dots) represent an emerging class of non-toxic nano-emitters that show excitation wavelength dependent photoluminescence (PL) with high quantum yield (QY) and minimal photobleaching. The vast majority of studies focus on C-dots that exhibit the strongest PL emission in the blue/green region of the spectrum, while longer wavelength emissions are ideal for applications such as bioimaging, photothermal and photodynamic therapy and light emitting diodes. Effective strategies to modulate the PL emission of C-dot based systems towards the red end of the spectrum rely on extensive conjugation of sp2 domains, heteroatom doping, solvatochromism, surface functionalization and passivation. Those approaches are systematically presented in this review, while emphasis is given on important applications of red-emissive suspensions, nanopowders and polymer nanocomposites.

The halotolerant photoautotrophic marine microalga Dunaliella salina is one of the richest sources of natural carotenoids. Here we investigated the effects of high intensity blue, red and white light from light emitting diodes (LED) on the production of carotenoids by strains of D. salina under nutrient sufficiency and strict temperature control favouring growth. Growth in high intensity red light was associated with carotenoid accumulation and a high rate of oxygen uptake. On transfer to blue light, a massive drop in carotenoid content was recorded along with very high rates of photo-oxidation. In high intensity blue light, growth was maintained at the same rate as in red or white light, but without carotenoid accumulation; transfer to red light stimulated a small increase in carotenoid content. The data support chlorophyll absorption of red light photons to reduce plastoquinone in photosystem II, coupled to phytoene desaturation by plastoquinol:oxygen oxidoreductase, with oxygen as electron acceptor. Partitioning of electrons between photosynthesis and carotenoid biosynthesis would depend on both red photon flux intensity and phytoene synthase upregulation by the red light photoreceptor, phytochrome. Red light control of carotenoid biosynthesis and accumulation reduces the rate of formation of reactive oxygen species (ROS) as well as increases the pool size of anti-oxidant.

Microbial immune escape represents the primary cause of induced pathogenesis in humans, and it represents a pivotal method used by viral agents to increase their load and suppress key mechanisms of the innate and adaptive immune system. This phenomenon represents the primary factor that led to the onset of the 1918-1920 A(H1N1) Influenza and 2020-2022 COVID-19 pandemics, and it possibly played a major role in the onset of the AIDS pandemic as well. Moreover, repeated incidents of immune evasion could be associated with higher rates of cellular aging (Jackson et al., 2017), most likely due to the consequent increased demands of energy consumption. Highly developed viral immune evasion ultimately indicates the high inner intelligence of human immunity due to reflective and imitative characteristics of reactions that are produced against initial actions. Ribonucleic acid-based viral genomes contain open reading frames, which consist of genes producing sixteen non-structural proteins. Such proteins play a considerable role in desensitizing first-line immunity during cellular infection, and non-structural proteins 1, 10 and 16 have the strongest effects against a healthy expression rate of Type I and Type III Interferon-encoding genes. Type I Interferons consist of IFN-alpha, -beta, -delta, -epsilon, -omega, -tau and -zeta, whilst Type III Interferons consist of IFN-lambda1, -lambda2 and -lambda3, and they act as stimulators of intracellular signalling cascades that in turn lead to the activation and expression of interferon-stimulated genes (Brown et al., 2022). The earlier the interferon-stimulated genes are activated, the lower the extent of pro-inflammatory mediation and overall, the more effective the antiviral immune response will be, given the exponential nature of the viral load increase. Non-structural protein 16 methylates the 5’ cap of the virus, making the pathogen-associated molecular patterns less recognisable by pattern-recognition receptors, and it requires activation by bonding with non-structural protein 10. It is preserved in the S-Adenosyl-L-Methionine pocket of the SARS-CoV-2 genome. Non-structural protein 1 (NS1) directly cleaves the host cell mRNA producing Type I and possibly Type III Interferons, thereby preventing a translation process of the immune proteins. NS1 has recently been found to often be packaged into exosomes once secreted by the viral genome in the cytosol, meaning that exocytosis and paracrine signalling to neighbouring cells before their actual infection is possible. As a result, NS1 is highly capable of silencing the first-line immune responses of uninfected neighbouring cells as well, thereby highlighting the need to adjust the focus of therapeutics and vaccinology toward first-line immunity and further indicating its foundational importance in the support for the development of precise and balanced defenses against microbial agents of concern (EL SAFADI et al., 2022).

The red fox, found on all continents except Antarctica, occupies diverse habitats. In Croatia it is an indigenous wild species with a population density of 0.7 animals per square kilometer. While tumors in wild animals from the Canidae family are scarce, the true prevalence and diversity of tumors are likely underestimated due to limited research. So far, a limited number of tumors were observed among the red fox population, either in their natural habitat or in captivity. As part of the National rabies control program, we examined 1,890 red fox carcasses over a four-year period. Our focus was on identifying abnormalities on the skin and internal organs that suggest potential neoplastic proliferation. Five red foxes, three males and two females, were found to have growths resembling potential tumors. Their age distribution spanned from 2 to 7 years. Microscopic investigation revealed two collagenous hamartomas, two Meibomian gland adenomas and one intra-abdominal teratoma within a cryptorchid testis. This retrospective study aims to provide a comprehensive description of tumor and tumor-like lesions observed in free-range red foxes from Croatia, marking the first research of its kind in Croatia.

In winter 2008-2009, Lake Occhito, a strategic multiple-uses reservoir in South Italy, was affected by an extraordinary Planktothrix rubescens bloom. P. rubescens is a filamentous potentially toxic cyanobacterium which has recently colonized many environments in Europe. A number of studies is currently available on the use of remote sensing techniques to monitor different fresh water cyanobacteria species. By contrast no specific applications are available on the remote sensing monitoring of P. rubescens. In this paper we present a specific algorithm, based on Water Leaving Reflectances (WLR) from MERIS data, atmospherically corrected using the Aerosol Optical Thickness (AOT) retrieved by MODIS data, to detect P. rubescens blooms. The high accuracy in AOT data, provided by MOD09 surface reflectance product, at 1km spatial resolution, allowed obtaining a good correlation between the WLR and the P. rubescens chlorophyll-a concentrations measured in the field, through multiple stations fluorometric profiles. A modified Normalized Difference Chlorophyll index (NDCI) algorithm is presented. The performance of the proposed algorithm has been successfully compared with other specific algorithms for turbid productive waters. We demonstrated how important is to verify the spectral behaviour of bio-optical parameters in order to develop an ad hoc algorithm that better performs with respect to standard algorithms.

The purpose of this study is to identify the steps involved in fabricating silica/chitosan composite membranes and their suitability in fuel cell application. It also intends to identify the physical characteristics of chitosan composite membranes, including their degree of water absorption, proton conductivity, methanol permeability, and functional groups. In this investigation, composite membranes were fabricated using the solution casting method with chitosan content of 5 g and silica variations dosage of 2% and 4% while stirring at a constant speed for 2h. According to the findings, the analysis of composite membranes produced chitosan membranes that were successfully modified with silica. The optimum membrane was found to be 4% s-SiO2 from the Sol-gel method with composite membrane's optimal condition of 0.234 cm/s proton conductivity, water uptake of 56.21%, and reduced methanol permeability of 0.99 × 10 -7 cm2/s in the first 30 minutes and 3.31 × 10-7 in the last 150 minutes. Maintaining lower water uptake capacity at higher silica content is still a challenge that needs to be addressed. However, the fabricated membranes showed exceptional results in terms of proton conductivity and methanol permeability.

In this study, we investigate spectral structure of conformable Sturm-Liouville problems and with this end, we obtain representation of solutions under different initial conditions and asymptotic formulas for eigenfunctions, eigenvalues, norming constants and normalized eigenfunctions. Consequently, we prove the existence of infinitely many eigenvalues. Also, we compare the solutions with graphics with different orders, different eigenvalues, different potentials and so, we observe the behaviors of eigenfunctions. We give an application to the α-orthogonality of eigenfunctions and reality of eigenvalues for conformable Sturm-Liouville problems defined by [15] in the last section.

Direct laser writing three-dimensional nano-lithography is an established technique for manufacturing functional 3D micro- and nano-objects via non-linear absorption induced polymerization process. In this Chapter an underlying physical mechanisms taking place during nano-confined polymerization reaction, induced by tightly focused ultra-short laser pulses, are reviewed and discussed. The special attention is paid on the effects that directly impact structuring resolution and minimum achievable feature size. Analysis of possible photo-initiation mechanisms as contributing multi-photon absorption and avalanche ionization in pre-polymers under diverse exposure conditions (wavelength, pulse duration) is presented. Feasible structuring of pure (non-photosensitized) and functional nanoparticles doped polymer precursors is justified and benefits of such materials/structures for microoptics, photonics and cell scaffolds are highlighted. The influence of temperature effects (induced by writing process itself or determined by ambient conditions) on polymerization process, observed in different pre-polymers under diverse exposure regimes is outlined. The further adjustment of the structuring resolution is possible via precise control of light polarization and diffusion assisted radical quenching. The work is concluded with a brief outlook on future challenges and perspectives related to refinement of 3D ultra-fast laser lithography fabrication process in the means of application of diverse post-processing methods and research into novel photo-curable materials including inorganic ones.

(1) Background: The Gárdos channel (KCNN4) and Piezo1 are the best-known ion channels in the red blood cell (RBC) membrane. Nevertheless, the quantitative electrophysiological behavior of RBCs and its heterogeneity are still not completely understood.; (2) Methods: Here we use state-of-the-art biochemical methods to probe for the abundance of the channels in RBCs. Furthermore, we utilize automated patch-clamp, based on planar chips, to compare the activity of the two channels in reticulocytes and mature RBCs. Besides this characterization, we performed membrane potential measurements to demonstrate the effect of channel activity and interplay on the RBC properties.; (3) Results: Both, Gárdos channel and Piezo1, albeit their average copy number of activatable channels per cell is in the single digit range, can be detected by transcriptome analysis of reticulocytes. Proteomics analysis of RBCs could only detect Piezo1 but not the Gárdos channel. Furthermore, they can be reliably measured in the whole-cell configuration of the patch-clamp method. While for the Gárdos channel the activity is higher in reticulocytes compared to mature RBCs, for Piezo1 the tendency is the opposite. While the interplay between Piezo1 and Gárdos channel cannot be followed using the patch-clamp measurements, it could be proved based on membrane potential measurements in populations of intact RBCs.; (4) Conclusions: We discuss the Gárdos channel and Piezo1 abundance, interdependencies and interactions in the context of their proposed physiological and pathophysiological functions, which are the passing of small constrictions, e.g., in the spleen, and their active participation in blood clot formation and thrombosis.

Severe COVID-19 alters the biochemical and morphological characteristics of blood cells in a wide variety of ways. To date, however, the vast majority of research has been devoted to the study of leukocytes, while erythrocyte morphological changes have received significantly less attention. The purpose of this research was to identify erythrocyte types that were unique to COVID-19, compare the number of different poikilocyte types, and measure erythrocyte sizes to provide data on size dispersion. Red blood cells obtained from 6 control donors (800-2200 cells for each donor) and 5 COVID-19 patients (800-1900 cells for each patient) were examined using low voltage scanning electron microscopy. We did not discover any forms of poikilocytes that would be unique to COVID-19. Among COVID-19 patients, we observed an increase in the number of acanthocytes (p=0.01) and a decrease in the number of spherocytes (p=0.03). In addition, our research demonstrates that COVID-19 causes an increase in the median (p=0.004) and interquartile range (p=0.009) when assessing erythrocyte size.

The aim of the study was to assess the adaptability of Polish Red cows to extensive housing and feeding conditions. The study was carried out using 22 cows together with their offspring, kept on a certified organic family farm, from 15 October 2017 – the start of the winter feeding season – to 30 October 2018 – the end of the pasture season. The animals were kept as beef suckler cows, which stayed in the pasture during the summer and were kept in buildings with permanent access to a large cattle run in winter. The following were determined in the study: changes in the cows’ weight and body condition, daily gains in calves, 210-day standardized body weight, and estimated milk yield of suckler cows. To evaluate the cows’ health, blood was collected from them twice and analysed for haematological and biochemical parameters. The results indicated that during the study period the Polish Red cows had adequate body condition, normal vital parameters, and a normal course and development of pregnancy despite the sparse winter diet. This definitively confirms the breed’s high capacity to adapt to an extensive system.

RNA interference (RNAi) using small interfering RNAs (siRNAs) is a powerful tool to target any protein of interest and is becoming more implementable for in vivo applications due to recent developments in RNA delivery systems. To exploit RNAi for cancer treatment, it is expedient to increase its selectivity by e.g. a prodrug approach to activate the siRNAs upon external triggering, e.g. by using light. Red light is especially well suitable for in vivo applications due to its low toxicity and higher tissue penetration. Known molecular (not nanoparticle based) red light activatable siRNA prodrugs rely on singlet oxygen (1O2) mediated chemistry. 1O2 is highly cytotoxic. Additionally one of the side products in the activation of the known siRNA prodrugs is anthraquinone, which is also toxic. We here report on an improved red light activatable siRNA prodrug, which do not require 1O2 for their activation. The 5’ terminus of its antisense strand is protected with an electron-rich azobenzene promoiety. It gets reduced and cleaved upon red light exposure in the presence of Sn(IV)(pyropheophorbide a)dichloride acting as a catalyst and ascorbate required as a bulk reducing agent producing active siRNAs.

Crustacean hyaluronidases are 1 poorly understood both in terms of their enzymatic properties and in terms of their structural features. In this work, we have shown that the hepatopancreas homogenate of the red king crab has a hyaluronidase activity that is an order of magnitude higher than its commercial counterpart. Zymography revealed the hyaluronidase activity of the protein roughly from40 to 50 kDa relative to the molecular marker used in electrophoresis. Analysis of the hepatopancreas transcriptome revealed a hyaluronidase sequence with an expected molecular weight of 42.5 kDa. It turned out that the reaction of cleavage of hyaluronate in the presence of a homogenate proceeds by the mechanism of b-elimination, which is well known for bacterial hyaluronidases. Thus, a new hyaluronidase of higher eukaryotes was found and described, which is not integrated into the modern classification of hyaluronidases.

Food consumption in Europe is changing. Red meat consumption has been steadily decreasing in the past decades. The rising interest of consumers for healthier and more sustainable meat products provide red meat producers with the opportunity to differentiate their offers by ecolabels, origin and health claims. This international study analyses the European consumer preferences for red meat (beef, lamb and goat) in seven countries: Finland, France, Greece, Italy, Spain, Turkey and the United Kingdom. Through a choice experiment, 2.900 responses were collected. Mixed multinomial logit models were estimated to identify heterogeneous preferences among consumers at the country level. Results indicate substantial differences between the most relevant attributes for the average consumers, as well as their willingness to pay for them in each country. Nevertheless, national origin and organic labels were highly valued in most countries.

A combination of physical-chemical analysis has been used to monitor the aging of red wines from D.O. Toro (Spain). The changes in the chemical composition of wines that occur along aging time can be permitted to discriminate wine samples collected after one, four, seven and ten months of aging. Different computational models were used to develop a good authenticity tool to certificate wines. In this research different models have developed: Artificial Neural Network models (ANNs), Support Vector Machine (SVM) and Random Forest (RF) models. The results obtained for the ANN model developed with sigmoidal function in the output neuron and the RF model permit to determine the aging time, with an average absolute percentage deviation below 1% and it can conclude that these two models have demonstrated its capacity as a valid tool to predict the wine age.

Threats to natural ecosystems are closely linked to human development, and the lack, insufficiency or inefficiency of public policies are some of the most important drivers of negative effects on the environment. The contribution of the IUCN’s Red List of Ecosystems (RLE) to conservation topics has been discussed in previous studies; however, to date its implications for conservation in public policies have not been addressed. This perspective discusses how the RLE may support the improvement and development of these policies, specifically through the implications for public policy of each of the criteria that substantiate the threat status of ecosystems. We aim to provide a plausible baseline to the operationalization of RLE in public and conservation policy, facilitating the work of governments, practitioners and decision makers. Finally, we provide recommendations and examples as to how to proceed in creating and modifying different public policy instruments, such as land-use planning, spatial zoning, tax reduction, compensation schemes, climate change adaptation plans, management of introduced species, development offsets and restoration investment. This perspective contributes to implement RLE into public policy and to improve ecosystem conservation by expanding the current scope of RLE into practical and political dimensions through plausible actions, policies and strategies.

Polymer adhesives have emerged as a promising dielectric passivation layer in hybrid bonding for 3D integration while they raise misalignment problems during curing. In this work, the synergistic effect of oxygen plasma surface activation and wetting is utilized to achieve bonding between completed cured polyimides. The optimized process achieves a void-less bonding with a maximum shear strength of 35.3 MPa at a low temperature of 250 °C in merely 2 min, significantly shortening the bonding period and decreasing thermal stress. It is found that the plasma activation generated hydrophilic groups on the polyimide surface, and the wetting process further introduced more -OH groups and water molecular on the activated polyimide surface. The synergistic process of plasma activation and wetting facilitate bridging polyimide interfaces to achieve bonding, providing an alternative path for adhesive bonding in 3D integration.

The goal of this paper is to propose a dual version of the direct cosine simplex algorithm (DDCA) for general linear problems. Unlike the two-phase and the big-M methods, our technique does not involve artificial variables. Our technique solves the dual Klee-Minty problem in two iterations and solves the dual Clausen’s problem in four iterations. The utility of the proposed method is evident from the extensive computational results on test problems adapted from NETLIB. Preliminary results indicate that this dual direct cosine simplex algorithm (DDCA) reduces the number of iterations of two-phase method.

In the East, it has already become a tradition to prepare dry powdered seasonings from the fruits of the sumac plant (Rhus coriaria L.). In this work, we tested their processing by extraction. Sumac was collected in mid-September in a mountain forest near the village of Gezik (Guba, Azerbaijan). Before extraction, it was first dehydrated in a drying cabinet SH-DO-149 FG (Southern Bark) to an air-dry state; then crushed in a Tube Mill control mill (Germany) into pieces of 1-3 mm in size. One- and two-stage maceration extraction was tested together with water or acidified water at temperatures from 20 to 80 °C. Evaporation of primary extracts was carried out in a rotary evaporator Lab Rot 2 L (China). The concentration of coloring substances in the extract (in units of optical density) was used as an output parameter. It was found that the use of two-stage extraction and acidified water with a concentration of citric acid 0.3 g/cm³ contributes to the extraction of the maximum amount of coloring substances and increases the transparency of the resulting extracts, which allows the extracted extracts to be concentrated directly to obtain a new type of natural food dye. The involvement of sumac fruits in industrial processing will increase the need for these medicinal fruits, and this, in turn, will serve as an incentive for the introduction of this medicinal plant into culture.

In 2014, the International Union for Conservation of Nature adopted the Red List of Ecosystems (IUCN RLE) criteria as the global standard for assessing risks to terrestrial, marine, and freshwater ecosystems. Identifying and quantifying the impacts of biodiversity assessments on the status of nature is key to justifying continued investment in assessments and enabling strategic planning to maximize future impact. In this policy perspective, we use an established impact evaluation framework to identify the impacts of the IUCN RLE since its inception. To date, 1,397 ecosystem units in 100 countries have been assessed following the IUCN RLE protocol. Systematic assessments are complete or underway in more than 25 countries and two continental regions (the Americas and Europe). Countries with established ecosystem red lists have already used them to inform legislation, land-use planning, protected area expansion, monitoring and reporting, and ecosystem management. IUCN RLE indices based on systematic assessments have high potential to inform global biodiversity reporting for the Aichi Targets and the United Nations Sustainable Development Goals. Expanding the coverage of IUCN RLE assessments, building capacity to undertake them, and establishing stronger policy instruments to manage red-listed ecosystems will be key to maximizing conservation impacts over the coming decades.

The effects of acidic electrolyzed water (AEW) on the microbiological and physicochemical properties of fresh-cut red cabbages were studied. The fresh-cut red cabbages and artificially inoculated red cabbages with Salmonella Typhimurium DT104 were washed with distilled water (DW) and different available chlorine concentration (ACC) of AEW for different times. AEW treatments significantly reduced the populations of native aerobic bacteria, molds and yeasts, and artificially inoculated S. Typhimurium DT104 compared to the DW treated and untreated red cabbage samples. The effectiveness of AEW treatments was greatly enhanced with increasing ACC and treatment times. S. Typhimurium DT104 were not detected in the washing water after the red cabbages treated by AEW. The surface color, pH, and total phenolic contents were did not significantly change when the red cabbages were washed with DW and 100 ppm AEW for 3 min. The anthocyanin contents and antioxidant activities of red cabbage were significantly reduced by 18.5% for cyanidin, 22.1% for pelargonidin, and 11.2% for DPPH radical scavenging activity, the impacts on the nutritional benefits of red cabbage were considered as limited and acceptable. The optimal process condition of AEW for washing red cabbage was 100 ppm for 3 min. In these conditions, most of the native microflora were inactivated, and artificial inoculated S. Typhimurium DT104 on the red cabbage were reduced by 40.2% (3.67 log CFU/g) and with minimal losses of nutrients and antioxidant activity, as well as no requirement of discontinuation treatment on the washing water.

We present a numerical illumination model to calculate direct as well as diffuse or Hapke scattered radiation scenarios on arbitrary planetary surfaces. This includes small body surfaces such as main belt asteroids as well as e.g. the lunar surface. The model is based on the raytracing method. This method is not restricted to spherical or ellipsiodal shapes but digital terrain data of arbitrary spatial resolution can be fed into the model. Solar radiation is the source of direct radiation, wavelength-dependent effects (e.g. albedo) can be accounted for. Mutual illumination of individual bodies in implemented (e.g. in binary or multiple systems) as well as self-illumination (e.g. crater floors by crater walls) by diffuse or Hapke radiation. The model is validated by statistical methods. A χ2 test is undertaken to compare simnulated images with DAWN images acquired during the survey phase at small body 4 Vesta.

The effect of fungicides on fermentation is of paramount importance to control the quality and safety of wines. In this work, the quality (oenological parameters, color, phenolic content, antioxidant activity, and fungicide residues) of wines from Monastrell grapes fortified with iprovalicarb, mepanipyrim and tetraconazole fungicides was evaluated. Along of the winemaking process, initial residues of mepanipyrim and tetraconazole were removed in more than a 90 % while dissipation of iprovalicarb was around 73 %. Significant statistical differences were found in presence of iprovalicarb and mepanipyrim residues especially at the highest concentration assayed. For both fungicides, an increase of the volatile acidity (between 4 and 8.6 times), the lactic acid content (between 8.6 and 20.5 times), the percentage of polymeric anthocyanins (between 1.3 and 1.7 times) and also a slight increase of the total phenolic index and the total anthocyanins content determined by spectrophotometry was observed. On the contrary, the total monomeric anthocyanins content decreased about 16.3 and 28.6 % in presence of iprovalicarb and mepanipyrim, respectively. These results could be related with the addition of SO2 to the grape must and a higher development of acetic acid or lactic bacteria in presence of these fungicides. The color of the final wines was also different in comparison with the control, with a higher yellow component, color intensity, tonality and hue angle, because of pH changes in the medium. Tetraconazole fermentations had a more similar trend to the control wine, probably due to the lower concentration of this fungicide in the grape must at the initial time. No effects on the antioxidant activity was observed for anyone of the target fungicides. A multivariate statistical analysis was done to view interrelationships between different variables (color and anthocyanins profile). The obtained model allowed to separate wines according to the fungicide treatment applied.

Data obtained by Direct Numerical Simulations (DNS) of pressure-driven turbulent channel flow are studied in the range 180 ≤ Reτ≤ 10,000. Reynolds number effects on the Mean Velocity Profile (MVP) and second order statistics are analyzed with a view of finding logarithmic behavior in the overlap region or even further from the wall, well in the boundary layer’s outer region. Values of Kármán constant for the MVPs and the Townsend-Perry constants for the streamwise and spanwise fluctuation variances are determined for the Reynolds numbers considered. A data-driven model of the MVP, proposed and validated for zero pressure gradient flow over a flat plate, is employed for pressure-driven channel flow by appropriately adjusting Coles’ strength of the wake function parameter, Π. There is excellent agreement between the analytic model predictions of MVP and the DNS-computed MVP as well as of the Reynolds shear stress profile. The skin friction coefficient Cf is calculated analytically. The agreement between the analytical model predictions and the DNS-based computed discrete values of Cf is excellent.

The sandwich format immunoassay is generally more sensitive and specific than more common assay formats, including direct, indirect, or competitive. A sandwich assay, however, requires two receptors to bind non-competitively to the target analyte. Typically, pairs of antibodies (Abs) or antibody fragments (Fabs) capable of forming a sandwiching with the target are identified through a slow, guess-and-check method with panels of candidate binding partners. Additionally, sandwich assays reliant on commercial antibodies can suffer from changes to reagent quality outside the researchers’ control. This report presents a reimagined and simplified phage display selection protocol that directly identifies sandwich binding peptides and Fabs. The approach yielded two sandwich pairs, one peptide-peptide and one Fab-peptide sandwich for the cancer and Parkinson’s disease biomarker DJ-1. Requiring just a few weeks to identify, the sandwich pairs delivered apparent affinity comparable to other commercial peptide and antibody sandwiches. The results reported here could expand the availability of sandwich binding partners for a wide range of clinical biomarker assays.

The thermal properties of novel nanomaterials play a significant role in determining the performance of the material in technological applications. Herein, direct measurement of the temperature diffusivity of cellulose nanocomposite films was carried out by the micro-contact method. Polymer films containing up to 2%wt. of nanocellulose were synthesised by a simple chemical process. Films of a high optical transmittance T ≈ 80 % (for a 200- μ m-thick film), which were up to 44% crystalline, were characterised. Two different modalities of temperature diffusivity based on: 1) a resistance change and 2) micro-thermocouple detected modulation of a heat wave, were used for the polymer films with cross-sections of ∼ 100 μ m thickness. Twice different in-plane α ‖ and out-of-plane α ⊥ temperature diffusivities were directly determined with high fidelity: α ‖ = 2 . 12 × 10 − 7 m 2 /s and α ⊥ = 1 . 13 × 10 − 7 m 2 /s. An amorphous polyethylene terephthalate (PET) fiber was measured for comparison α ‖ = 1 . 15 × 10 − 7 m 2 /s. This work provides an example of a direct contact measurement of thermal properties of nanocellulose composite films. The thermal diffusivity, which is usually high in strongly interconnected networks and crystals, was investigated for the first time in this composite.

We fabricate large-area atomically thin MoS₂ layers through the direct transformation of crystalline molybdenum trioxide (MoO₃) by sulfurization at relatively low temperatures. The obtained MoS₂ sheets are polycrystalline (~10-20 nm single-crystal domain size) with areas of up to 300×300 µm² with 2-4 layers in thickness and show a marked p-type behaviour. The synthesized films are characterized by a combination of complementary techniques: Raman spectroscopy, X-ray diffraction, transmission electron microscopy and electronic transport measurements.

The “red code” (RD) represents the highest levels of emergency in the emergency department (ED). The study retrospectively analyzed RDs in the Regina Margherita Children’s Hospital ED, a regional referral center in north Italy, between 1 July 2020 and 30 June 2023. The aim was to describe RD characteristics and to identify significant correlations between presenting complaints and clinical management. The study includes 934 RDs (0.9% of overall ED admissions); 64% were assigned based on the Pediatric Assessment Triangle alteration. Most patients, 86.5%, followed the medical pathway, while 13.5% were surgical cases. Admission complaints were respiratory (46.9%), neuropsychiatric (26.7%), traumatic (11.8%), cardiologic (9.3%), metabolic (3.8%), and surgical (1.5%). Seventy-six per cent of patients received vascular access, and intraosseous access was obtained in 2.2% of them. In one-third of RDs, an urgent critical care evaluation was necessary, and 19% of cases required admission to the intensive care unit. The overall mortality rate was 3.4% (0.4% in ED setting). The study identified six distinct diagnostic pathways, each associated with specific characteristics in clinical presentation, management, therapeutic interventions, and outcomes: this underscored the significance of a systematic approach in improving outcomes in pediatric RD management.

Herein, activated red mud particles are used as an adsorbent for adsorbing phosphorus. Different concentrations of HCl and deionized water are used for desorption tests, and the optimal desorption mechanism is investigated. The Langmuir isothermal model and pseudo-second-order kinetic linear model produce consistent results: the desorption is dominated by the surface desorption of the monomolecular layer, and chemical desorption limits the rate of surface desorption. The desorption thermodynamics indicates that the desorption of phosphorus by the desorbent is spontaneous and high temperature promotes desorption. The particle diffusion model demonstrates that the removal of phosphorus in the form of precipitation from the surface of an activated hematite particle adsorbent occurs primarily via a chemical reaction, and an analysis of the microscopic morphology indicates that the desorption process is primarily accompanied by the dissolution of the metal element Ca, followed by Al and Fe. The desorbent reacts with the active elements in red mud, and the vibration of the [SiO4]2− group calcite or aragonite group of calcium–iron garnet in the functional group disappears. The intensity of the wave peaks of the PO43− groups decreases considerably. Thus, desorption primarily involves the chemical desorption of the monomolecular layer.

Up-conversion luminescence (UCL) materials are of great importance due to their unique optical properties. In particular, the red UCL, falling into the optical transmittance window of biological tissues, can realize deep tissue penetration depth and high-resolution bioimaging. In this work, effective red UCL is achieved in the ternary sulfide by the introduction of Tm3+ or Ho3+ ions into Er3+ doped NaYS2 under 1550 nm excitation. The main emission peak is successfully tuned from green (NaYS2:Er3+) to highly efficient red luminescence (NaYS2:Er3+,Tm3+ and NaYS2:Er3+,Ho3+). The maximum red to green emission intensity ratio (IR/IG) increased by 31 and 80 times, respectively. The lifetime of 4I9/2(Er3+) level decreases significantly from 3432 s (NaYS2:Er3+) down to 636 (NaYS2:Er3+,Tm3+) and 423 s (NaYS2:Er3+,Ho3+), respectively. This is due to the altered energy transfer pathways, resulting in the population of 4F9/2(Er3+). The mechanisms of UCL and energy transfer processes are further supported by fluorescence decay dynamic measurements. The results show the realization of red-emissive UCL in the promising NaYS2 matrix, representing a new type of red UCL phosphors.

Red plum apricot is the best apricot over the world. Since having been introduced into Guyuan county in 1987 from Shaanxi province, red plum apricot grows well and then has been selected as good varieties to popularize in semirid loess hilly regions because the color of red plum apricot is beautiful, aroma fragrant , and taste is the mix of sour and sweet and nutrition is rich. Since 1995, the yield, benefits and planting area of red plum apricot increase doubly, and the distribution range of red plum apricot increased from Guyuan to the whole Ningxia, and then to Gansu province and so on in the water-limited regions, China. However, there are still some problems in the sustainable produce of red plum apricot. In order to promote the development of red plum apricot and meet people's increasing demand, we should do intensive study of the relationship between red plum apricot and environment and the comparison of possible methods to reduce the bad influence of drought, low temperature and frost on quality and production of red plum apricot, and determine the soil water resources use limit by red plum apricot and the suitable leaf amount of red plum apricot when the planting density equal soil water carrying capacity for red plum apricot and select the best method to reduce or evade the bad influence of soil drought, low temperature, frost and soil drought on red plum apricot to ensure the sustainable produce of red plum apricot in Sustainable Produce of red plum apricot in water-limited regions.

The aim of this work is to study the phase transformations, microstructures and mechanical properties of the martensitic stainless steel (MSS) 410 deposits produced by laser powder-directed energy deposition (LP-DED) additive manufacturing. The LP-DED MSS 410 deposits underwent the post heat treatment in austenitizing at 980℃ for 3hrs and followed by different tempering treatment at the temperatures of 250, 600, and 750℃ for 5hrs, respectively. The analyses of phase transformations and microstructural evolutions of LP-DED MSS 410 were carried out using X-ray diffraction, SEM-EDS, and EBSD. Vickers hardness and tensile strength properties were also measured to analyze the effects of the different tempering heat treatments. It reveals that as-built MSS 410 has very fine lath martensite and high hardness of about 480HV1.0 and tensile strength of about 1280 MPa, but elongation was very lower than the post heat treated ones. Precipitations of chromium carbide (Cr23C6) were most commonly observed at the grain boundaries and the entire matrix at the tempering temperatures of 600℃ and 750℃. In general, the tensile strengths de-creased from 1381MPa to 688MPa as tempering temperatures increased up to 750℃ from 250℃. Additionally, as the tempering temperature increased, the chromium carbide and tempered mar-tensite structures became coarser.

Keywords: Tendon injuries; Mallet finger; Suture techniques

The carbonation of industrial calcium-rich byproducts such as steel slag demonstrates significant potential for CO2 sequestration. This technique aids in reducing carbon emissions while also promoting waste recycling. Despite its advantages, gaps remain in understanding how steel slag characteristics and operational parameters influence the carbonation process, as well as the underlying mechanism of direct aqueous carbonation. We evaluated the carbonation performance of three types of steel slag at temperatures below 100°C using a gas–liquid–solid reaction system. The slag with the highest CO2 sequestration capacity was chosen for a systematic evaluation of the effects of operating conditions on carbonation efficiency. Thermodynamic analysis indicated that the reactivity of CaO and Ca(OH)2 with CO2 exceeded that of CaO•SiO2 and 2CaO•SiO2. Under conditions of 85°C, a particle size less than 75 μm, an initial CO2 pressure of 0.5 MPa, a liquid-to-solid ratio of 5 mL/g, and a stirring speed of 200 rpm, the steel slag achieved a sequestration capacity (K) of 283.5 gCO2/kg and a carbonation efficiency (ζCa) of 51.61%. Characterization of the slag before and after carbonation using X-ray diffraction, SEM‒EDS, thermogravimetric analysis, and Fourier transform infrared spectrometry confirmed the formation of new carbonates. Mechanistic analysis revealed that the rate-limiting step initially involved the mass transfer of CO2, transitioning to Ca2+ mass transfer as time progressed. Our research provides a viable technique for CO2 capture and a beneficial approach for reutilizing waste steel slag. Furthermore, solid residues after capturing CO2 have the potential for conversion into carbon-negative building materials, offering a sustainable strategy for steel companies and other enterprises with high carbon emissions.

New families of direct serendipity and direct mixed finite elements on general planar, strictly convex polygons were recently defined by the authors. The finite elements of index r are H1 and H(div) conforming, respectively, and approximate optimally to order r+1 while using the minimal number of degrees of freedom. The shape function space consists of the full set of polynomials defined directly on the element and augmented with a space of supplemental functions. The supplemental functions were constructed as rational functions, which can be difficult to integrate accurately using numerical quadrature rules when the index is high. This can result in a loss of accuracy in certain cases. In this work, we propose alternative ways to construct the supplemental functions on the element as continuous piecewise polynomials. One approach results in supplemental functions that are in Hp for any p≥1. We prove the optimal approximation property for these new finite elements. We also perform numerical tests on them, comparing results for the original supplemental functions and the various alternatives. The new piecewise polynomial supplements can be integrated accurately, and therefore show better robustness with respect to the underlying meshes used.

We discuss two methods to detect the presence and location of a person in a small-scale room and compare the performances. The first method is Direct Intersection, which determines a coordinate point based on the intersection of spheroids defined by observed distances of high-intensity reverberations. The second method, Sonogram analysis, overlays all channel’s room impulse responses to generate an intensity map for the observed environment. We demonstrate that the former method has lower computation complexity and higher accuracy for small numbers of channels, while the latter performs more robustly.

Red mud (RM), a bauxite residue, contains hazardous radioactive wastes and alkaline material and poses severe surface water and groundwater contamination risks, necessitating recycling. Pretreated RM can be used to make adsorbents for water treatment. However, its performance is affected by many factors, resulting in a nonlinear correlation and coupling relationship. This study aimed to identify the best formula for an RM adsorbent using a mathematical model that examines the relationship between 11 formulation types (e.g., pore-assisting agent, component modifier, and external binder) and nine properties (e.g., specific surface area, wetting angle, and Zeta potential, among others). This model was built using a back-propagation neural networks(BP) based on single-factor experimental data and orthogonal test data. The model trained and predicted the established network structure to obtain the optimal adsorbent formula. The RM particle adsorbents had a pH of 10.16, specific surface area(BET) of 48.92 m2·g−1, pore volume of 2.10 cm3·g−1, compressive strength(ST)) of 1.12 KPa, and 24-h immersion pulverization rate(η_m) of 3.72%. In the removal of total phosphorus in flotation tailings backwater, it exhibited a good adsorption capacity (Q)and total phosphorous removal rate(η) of 48.63 mg·g−1 and 95.13%, respectively.

The aim of this study was to determine the changes in chemical composition of the fresh red raspberry ‘Willamette’ fruits, caused by the presence of raspberry leaf blotch emaravirus (RLBV). In three experimental orchards of ‘Willamette’ raspberry, fruits were harvested from RLBV‒free and RLBV-infected plants in 2019 and 2020. Fruits were collected at appropriate maturity stages and further analyzed on total phenolics, total anthocyanins, and selected individual phenolics. In all three experimental orchards, the phenolic profiles of infected and uninfected fruit samples were considerably different during both studied years. Nonetheless, the intensity of the modifications varied greatly depending on location and harvest year. Statistical analysis revealed that the influence of RLBV infection on the studied features is undeniable, although the influences of weather conditions and soil composition outweigh the influence of RLBV. Taking into consideration all experimental and statistical data, it can be concluded that raspberry 'Willamette' fruits may be RLBV-tolerant, while sensitivity to environmental conditions and soil composition is emphasized.

In this paper, the effects on the rheological properties, particle size distribution, and fluorescence properties of red wine were investigated under microwave irradiation, and the mechanism of the effects of microwave irradiation on the sensory properties of red wine was discussed. The results showed that the effect of microwave on the rheological properties in red wine could be fitted by the Power-law model and Carson model, through the analysis of the rheological constants, yield stress, and viscosity coefficient of wine, it was found that microwave treatment could improve leg phenomenon and thickening effect by the change of rheological properties; the particle size distribution in wine indicated that microwave irradiation did change the particle size distribution through friction effect and oxidative polymerization, resulting in the wine’s visual effect and mouthfeel; the wine quality could be improved by enhancing the fluorescence intensity under different microwave conditions, which meant that microwave technology could speed up the formation of fluorescent substances, such as the polymerization of flavan-3-ols. In conclusion, microwave treatment could modify the sensory characteristics of wine, and further provide the theoretical basis for the application of microwave in winemaking.

The extraction of grape processing waste (wine pomace) via microwave-hydrodiffusion and gravity (MHG) from three different cultivars grown in Sicily (Syrah, Perricone and Nero d’Avola) rapidly affords aqueous extracts highly concentrated in valued biophenols including flavonoids, anthocyanins and phenolic acids. The method does not employ organic solvent, acid or base and does not require grinding or freeze drying of the wine pomace nor separation of the grape skins from seeds and stem. All the extracts have a pronounced stability as shown by their red-violet color fully retained after storage for more than a year (15 months) in freezer under air. Concentrations of phenolics up to 2000 ppm were detected in the aged extracts of Sicily’s local cultivar Perricone, which also has the highest content of flavonoids. These findings provide a simple and economically viable extraction route to biophenol-rich red extracts that can be used as food colorants as well as to formulate nutraceutical, cosmetic and personal care products starting from an agricultural by-product available in >10 million tonne yearly amount.

The experiment was conducted to determine the effects of different substrate on the survival, growth and total number of moulting in juvenile red claw, Cherax quadricarinatus for aquaculture purposes. In the present study, there is a problem in culturing juvenile stage of C. quadricarinatus especially for survival and growth. Thus, a substrate was used to improve the survival and growth of C. quadricarinatus especially for the intensive system due C. quadricarinatus need a large space to survive. C. quadricarinatus with initial body weight from 1.10 to 2.90 g, total length 2.82 to 4.36 cm were placed in tanks (80 L in volume capacity) with 55L in water and there are eight juveniles in each tank. Treatment tanks were introduced with coral as treatment 2 and pipe as treatment 3. While, tank without shelters was set as control (treatment 1). Black nets were installed on top of each for circumventing foreign objects enter the tank and protect from direct sunlight. Besides, C. quadricarinatus were acclimatized for seven days before started the experiment. The experiment was done in duplicate and conducted for 60 days and C. quadricarinatus were fed twice daily (morning and evening) based on 5% of body weight. From the total of two replications, C. quadricarinatus for treatment 2 (coral) were significantly in survival (81.25±8.84%), weight gain (347.36 ±6.04%), specific growth rate (2.50±0.02%), carapace length (32.93 ± 0.93 %) and total number of moulting (55.00±2.93%) compared to other treatments. Besides, the control treatment (treatment 1) has a lower percentage in survival (37.50±8.84%) weight gain (122.60±20.51%) specific growth rate (1.33±0.15%), carapace length (25.84±0.33 %) and total number of molting (29.00±0.71%). As a conclusion, usage of coral as the substrate in the rearing tank showed improvement in survival, weight gain, specific growth rate, carapace length and total number of molting in C. quadricarinatus. The coral can use in rearing tank for increase the growth and survival for a small scale and not for commercial. In addition, in the environmental aspect, the present study showed the benefit of replacing the use of PVC pipes with the natural structure of dead coral.

Circulating tumor cells (CTC) have shown to be prognostic in advanced colorectal cancer (advCRC), but their value for predicting response to treatment or as a source of molecular data is debated. We compared CellSearch® (Janssen Diagnostics, LLC) and IsoFlux^TM (Fluxion Biosciences Inc, South San Francisco, CA) systems for the enumeration of CTC in patients with newly diagnosed advCRC (group 1; n=34). Using castPCR^TM we studied KRAS status in CTC isolated with IsoFlux^TM and compared it with that of the primary tumor in patients from group 1 and in KRAS wild-type (KRAS^WT) patients with progressive disease (group 2; n=22). Median number of CTC detected with CellSearch® (groups 1 and 2) was 1 (range: 0-78) and with IsoFlux^TM (group 1) was 8 (range: 0-419), showing a modest correlation (r=0.345, P=0.036), which improved if lung metastases (r=0.805, P=0.016) or if lung and liver metastases were present (r=0.812, P=0.05). A Bland-Altman plot showed that the higher the number of CTC detected the larger the difference between both methods in favor of IsoFlux^TM. After a median follow-up since CTC collection of 16 months (range: 1-30) CellSearch® ≥ 3 CTC (HR 2.77, 95% CI 0.77-9.95) and IsoFlux^TM ≥ 11 CTC (HR 4.14, 95% CI 1.05-16.19) were established as the best cutoff points for predicting survival. Using castPCR^TM we found KRAS mutations in CTC in 4 out of 8 patients from group 1 and in 2 out of 3 patients from group 2. None of these mutations were found in the primary tumor using standard methods, possibly reflecting intratumor heterogeneity or treatment selection pressure. We conclude that IsoFlux^TM is more efficient than CellSearch® in the isolation of CTC in patients with advCRC, achieving, in a majority of cases, the established minimum of CTC for castPCR^TM-based genetic analyses.

Understanding pollen and ovule fertility as factors influencing fruit and seed set is important in cassava breeding. Red light (RL) and plant growth regulators (PGRs) have been used to induce or enhance flowering and fruit set in cassava without any reference to effects on pollen viability or ovule fertilizability. This study investigated effects of field-applied RL and PGR on pollen viability and ovule fertilizability. Panels of cassava genotypes, with early or moderate flowering responses were used. RL was administered from dusk to dawn. Two PGRs, a cytokinin (6-benzyl adenine, BA) and an anti‑ethylene (silver thiosulphate, STS) were applied. Pollen viability was assessed basing on pollen grain diameter, in vitro stainability, in vivo germinability, ovule fertilizability and ploidy level. Treating flowers with RL led to increased pollen diameter from 143.6 to 148.5µm, stainability from 82.9 to 93.0%, ovule fertilizability from 52.0 to 56.9% in treated female flowers and 47.7 to 64.3% on using pollen from treated male flowers. Fruit set increased from 51.5 to 71.8% in RL-treated female flowers and from 53.7 to 71.1% when pollen from RL-treated male flowers was used. Seed set followed a trend similar to that of fruit set. Ploidy level of pollen from RL-treated flowers increased slightly and positively correlated with pollen diameter (R2 = 0.09*), ovule fertilization (R2 = 0.20*), fruit (R2 = 0.59*) and seed set (R2 = 0.60*); but negatively correlated with pollen stainability. Treating flowers with PGR did not affect pollen diameter and stainability, but increased ovule fertilizability from 42.9 to 64.9% and fruit set from 23.2 to 51.9% in treated female flowers and 31.3 to 54.7% when pollen from treated male flowers was used. Application of combined BA+STS on male flowers caused the highest ovule fertilizability, fruit and seed set efficiency, though this varied among study genotypes. These results show that RL and PGR treatment of flowers increases pollen viability and ovule fertilizability. This is important for planning pollination strategies in cassava breeding programmes.

The present work was performed to evaluate the levels of phytochemical constituents and the antioxidant and antibacterial properties of marine red seaweed (Kappaphycus alvarezii) and seagrass (Cymodocea serrulata). Quantitative phytochemical analysis, antioxidant activity and antimicrobial activity against 5 potential pathogenic bacteria was investigated. In both cases were found presence of flavonoids, tannins, phenolic compounds, glycosides, steroids, carbohydrates and ashes. Alkaloids were only found in K. alvarezii, buy not in C. serrulata. The antimicrobial properties of both K. alvarezii and C. serrulata chloroform extracts were found to be antagonis-tically effective against the gram-positive bacterium Bacillus subtilis and the gram-negative bacterium Vibrio parahaemolyticus, Vibrio alginolyticus, Vibrio harveyi and Klebsiella pneu-moniae. GC‒MS analysis revealed the presence of 94 bioactive compounds in K. alvarezii and 104 C. serrulata, including phenol, decane, dodecane, hexadecane, vanillin, heptadecane, diphenyla-mine, benzophenone, octadecanoic acid, dotriaconate, benzene, phytol, butanoic acid, and 2-hydroxyl-ethyl ether, which played a vital role in antioxidant and antibacterial activities. Thus, in view of the results, both K. alvarezii and C. serrulata could be considered as sources of ingre-dients with appreciable nutritional and medicinal value.

The development of dosimetry and studies in peptide receptor radionuclide therapy (PRRT) over these two last decades are reviewed. Differences in kidney and bone marrow toxicity reported between ⁹⁰Y, ¹⁷⁷Lu and external beam radiotherapy (EBRT) are discussed with regards to the physical properties of these beta emitter radionuclides. The impact of these properties on the response to small and large tumors is also considered. Capacities of the imaging modalities to assess the dosimetry to target tissues are evaluated. Studies published in the last two years that confirm a red marrow uptake in ¹⁷⁷Lu-DOTATATE therapy, as already observed 20 years ago in ⁸⁶Y-DOTATOC PET studies, are commented and analyzed in the light of the recent knowledges in transferrin transport mechanism. The review enlightens the importance i) of using state of the art imaging modalities, ii) of individualizing the activity to be injected with regards to the huge tissue uptake variability observed between patients, iii) of challenging the currently used but inappropriate blood based red marrow dosimetry and iv) of considering individually tandem therapy. Last, a smart individually optimized tandem therapy taking benefit of the bi-orthogonal toxicity-response pattern of ¹⁷⁷Lu-DOTATATE and of ⁹⁰Y-DOTATOC is proposed.

An estimation of the electric sources in the heart were conducted using a novel method, based on Huygens’ Principle, aiming at a direct estimation of equivalent bioelectric sources over the heart surface in real time. The main scope of this work was to establish a new, fast approach for the solution of the inverse electrocardiography problem. The study was based on recorded electrocardiograms (ECGs). Based on the Huygens’ principle, measurements obtained from a patient’s thorax surface were interpolated over the surface of the employed volume conductor model and considered as a secondary Huygens’ sources. These sources, being non-zero only over the surface under study, were employed to determine the weighting factors of the eigen-functions expansion describing the generated voltage distribution over the whole volume conductor volume. With the availability of the potential distribution stemming from measurements, the electromagnetics reciprocity theorem is applied once again to yield the equivalent sources over the pericardium. The methodology is self validated, since the surface potentials calculated from these equivalent sources are in very good agreement with ECG measurements. The ultimate aim of this effort is to create a tool providing the equivalent epicardial voltage or current sources in real time, i.e. during the ECG measurements with multiple electrodes.

Raw materials used for producing concrete, such as sand and gravel, are in short supply worldwide. It has been reported that the production of cement, one of the main constituents of concrete, results in the emission of a large amount of CO₂, accounting for 8% of total global CO₂ emissions. In this study, we developed a method to produce a construction material using only sand as the solid raw material. By utilizing a technique to produce organic silicon material from sand, we placed sand, alcohol, and catalyst in a closed vessel and heated it to 240 °C. After 24 h, the sand particles were bonded to each other, and a hardened body was formed. A tradeoff in production conditions, such as temperature, time, and the amount of sand, was confirmed.

The present paper investigates the effect of poverty on foreign direct investment (FDI) inflows in developing countries. It complements the important extant literature on the effect of FDI inflows on poverty by examining the issue the other way around. The analysis is conducted using a sample of 117 countries over the period 1980-2017, and the two-step system Generalized Methods of Moments (GMM) technique. It has relied on two indicators of poverty, namely poverty headcount ratio and poverty gap. Findings indicate that over the full sample, poverty influences negatively FDI inflows, including through its adverse effect on human capital (that is, both education and health). Unsurprisingly, low-income countries (considered as poorest countries in the full sample) experience a higher negative effect of poverty on FDI inflows than other countries. On another note, participation in international trade matters for the effect of poverty on FDI inflows. In fact, an increase in poverty levels results in lower FDI inflows in countries that experience low workers' productivity, a less developed financial sector, and a low level of infrastructure development. Furthermore, the effect of poverty on FDI inflows does not depend on the prevailing economic growth rate. Finally, the analysis has revealed the existence of a non-linear effect of poverty on FDI inflows for the poverty headcount indicator, but not for the poverty gap indicator. The non-linear effect of poverty headcount on FDI inflows is such that a rise in poverty headcount ratio results in lower FDI inflows, but an additional increase in poverty more than further discourages FDI inflows. The conclusion discusses the implications of these findings.

In this paper, we present a preliminary study and conceptual idea concerning 3D printing water-sensitive glass by exemplifying with a borosilicate glass with high alkali and alkaline oxide contents using direct ink writing. The investigated material was prepared in the form of a glass frit, which was further ground in order to obtain a fine powder of desired particle size distribution. In a following step, inks were prepared by mixing the fine glass powder with Pluoronic F-127 hydrogel. The acquired pastes were rheologically characterized and printed using a Robocasting device. DSC experiments were performed for base materials and the obtained green bodies. After sintering, SEM and XRD analyses were carried out in order to examine microstructure and the eventual presence of crystalline phase inclusions. Results confirmed that obtained inks exhibit stable rheological properties despite the propensity of glass to undergo hydrolysis and could be adjusted to desirable values for 3D printing. No additional phase was observed, supporting the suitability of the designed technology for the production of water sensitive glass inks. SEM micrographs of the sintered samples revealed the presence of closed porosity, which may be the main reason of light scattering.

In the northern Patagonian region of Argentina, there exist some of the largest bentonite deposits. Four bentonite samples (B1, B2, B3, and B4) from two deposits were thoroughly characterized and evaluated as potential adsorbents of anthocyanins extracted from red cabbage. Anthocyanins (ACy) are natural colourants obtained from fruits and plants and have shown excellent antioxidant properties that have promising applications in health. The adsorption of ACy onto bentonites enhances their stability relative to that observed in aqueous solutions. Material characterization showed that three of the samples are sodium bentonites (Na-bentonites: B2, B3, and B4), while the fourth exhibits a large quantity of magnesium and calcium in its interlayer, classifying it as a Mg-Ca-Na-bentonite (B1). Na-bentonites demonstrated higher ACy adsorption capacities, occurring through cation exchange while Mg-Ca-Na-bentonite adsorption occurs by another kind of interaction and a cooperative adsorption mechanism, resulting in the lowest ACy adsorption. The highest adsorption capacity was for B3, characterized by the highest smectite content, cation exchange capacity, and proportion of monovalent cations in its interlayer. Under the conditions studied, sodium smectites proved to be capable of retaining red cabbage ACy, there by introducing a novel avenue for potential applications of regional materials with potential implications for health-related uses.

InGaN-based red micro light-emitting diodes (µLEDs) of different sizes prepared in this work. The red GaN epilayers were grown on a 4-inch sapphire substrate through metal organic chemical vapor deposition (MOCVD). Etching, sidewall treatment, and p- and n- contact deposition was involved in the fabrication process. Initially, the etching process would cause undesirable damages to the GaN sidewalls, which leads to an increase in leakage current. Hence, we employed KOH wet treatment to rectify the defects on the sidewalls and conducted a comparative and systematic analysis on electrical as well as optical properties. We observed that the µLEDs with a size of 5µm exhibited substantial leakage current, which was effectively mitigated by the application of KOH wet treatment. In terms of optical performance, the arrays with KOH demonstrated improved Light Output Power (LOP). Additionally, while photoelectric performance exhibited a decline with increasing current density, the devices treated with KOH consistently outperformed their counterparts in terms of optoelectronic efficiency. It is noteworthy that the optimized devices displayed enhanced photoelectric characteristics without significantly altering their original peak wavelength and FWHM. Our findings point to the elimination of surface non-radiative recombination by KOH wet treatment, thereby enhancing the performance of small-sized red µLEDs which has significant potential in realizing full-color micro-displays in near-eye projection applications.

Cesium lead iodide (CsPbI3) perovskite nanocrystals (NCs) are a promising material for red light-emitting diodes (LEDs) due to their excellent color-purity and high luminous efficiency. However, small-sized CsPbI3 colloidal NCs, such as nanocubes, used in LEDs suffer from confinement effects, negatively impacting their photoluminescence quantum yield (PLQY) and overall efficiency. Here, we introduced YCl3 into the CsPbI3 perovskite, which formed anisotropic, one-dimensional (1D) nanorods. This was achieved by taking advantage of the difference in bond energies between Cl− and I− ions, which caused YCl3 to promote the anisotropic growth of CsPbI3 NCs. The YCl3-based nanorods improved the PLQY and storage stability by passivating the defects reducing the nonradiative recombination rates. When the YCl3-substituted CsPbI3 nanorods are applied to the emissive layer in LEDs, we achieve an external quantum efficiency of ~3.16% which is 1.86-fold higher than the pristine CsPbI3 NCs (1.69%) based LED. Notably, the ratio of horizontal transition dipole moments (TDMs) in the anisotropic YCl3:CsPbI3 nanorods was determined to be 75%, which is higher than the isotropically oriented TDMs in CsPbI3 nanocrystals (67%). This increased TDM ratio led to higher light outcoupling efficiency in nanorods-based LEDs. Overall, the results suggest that YCl3-substituted CsPbI3 nanorods could be promising for achieving high-performance perovskite LEDs.

The present study analyzed the efficiency of a naturally derived fenugreek powder for removal of Congo red dye from the aqueous solution. The flocculation Studies on Congo Red (CR) a hazardous, textile dye onto Fenugreek Powder and its adsorption was analyzed. Fenugreek Powder is Eco-friendly, biodegradable and locally available in the market. The dye adsorption process was performed in different batches at varying pH, dye concentration, adsorbent concentration and contact time to get the best results. The result showed that the maximum removal of dye was 42.4% with 10mg/l of Fenugreek powder at pH 4.

Stretching along the border of North Dakota and Minnesota, The Red River Valley (RRV) of the North has the highest frequency of reported blizzards within the contiguous United States. Despite the numerous impacts these events have, few systematic studies exist discussing the meteorological properties of blizzards. As a result, forecasting these events and lesser blowing snow events is an ongoing forecast challenge. This study presents a climatology of atmospheric patterns associated with RRV blizzards for the winter seasons of 1979-1980 to 2017-2018. Patterns were identified using subjective and objective techniques using meteorological fields from the North American Regional Reanalysis (NARR). The RRV experiences on average, 2.6 events per year. Blizzard frequency is bimodal with peaks occurring in December and March. The events can largely be typed into four meteorological categories dependent on the forcing that drives the blizzard: Alberta Clippers, Arctic Fronts, Colorado Lows, and Hybrids. Objective classification of these blizzards using a competitive neural network known as the Self-Organizing Map (SOM) demonstrates that gross segregation of the events can be achieved with a small (8-class) map. This implies that objective analysis techniques can be used to identify these events in weather and climate model output that may aid future forecasting and risk assessment projects.

Many corporations and governments aspire to become Net Zero Carbon Dioxide by 2030-2050. Achieving this goal requires understanding where energy is produced and consumed, the magnitude of CO₂ generation, and the Carbon Cycle. Many prior proposed solutions focus on reducing future CO₂ emissions from continued use of fossil fuels. Examination of these technologies exposes their limitations and shows that none offer a complete solution. For example, bioethanol is shown to be both carbon and energy inefficient. Direct Air Capture technologies are needed to reduce CO₂ already in the air. The most natural form of Direct Air Capture involves letting nature do the work of creating biomass via photosynthesis. However, it is necessary to break the Carbon Cycle by permanently sequestering that biomass carbon in “landfills” modified to discourage decomposition to CO₂ and methane. Tree leaves and biomass grown on-purpose, such as high yield switchgrass, are proposed as good biomass sources for this purpose. Left unsequestered, leaves decompose with a short Carbon Cycle time constant releasing CO₂ back to the atmosphere. While in any given year, leaves represent a small fraction of a tree’s above ground biomass, leaves can represent a substantial fraction of the total biomass generated by a tree when integrated over a tree’s lifetime. Understanding the chemistry of the distinct phases landfills undergo is the key to minimizing or eliminating decomposition. First, the compact cross-linked structure of cellulose and keeping water out will make it difficult for initial depolymerization to release sugars. Air ingress should be minimized to minimize Phase I aerobic decomposition. pH manipulation can discourage acid formation during Phase II. Lignocellulose is low in nutrients needed for anaerobic decomposition. Inhibitors can be added if needed. The goal is to move quickly to the dormant phase where decomposition stops. The cost for Carbon Capture and Storage (CCS) for growing and sequestering high yield switchgrass is estimated to be lower than CCS for steam reforming of methane hydrogen plants (SRM) and supercritical or combined cycle coal power plants. Thus, sequestration of biomass is a natural, carbon efficient, and low-cost method of Direct Capture. Biomass sequestration can provide CO₂ removal on giga tonnes per year scale and can be implemented in the needed timeframe (2030-2050).

In the coded pulse scanning light detection and ranging (LIDAR) system, the number of laser pulses used at a given measurement point changes depending on the modulation and the method of spreading used in optical code-division multiple access (OCDMA). The number of laser pulses determines the pulse width, output power, and duration of the pulse transmission of a measurement point. These parameters determine the maximum measurement distance of the laser and the number of measurement points that can be employed per second. In this paper, we evaluate the performance and characteristics of combinations of modulation and spreading technology that can be used for OCDMA, and study optimal combinations according to varying operating environments.

This paper presents for the first time the design of a microwave sensing setup for the potential monitoring and identification of red palm weevil (RPW) gender type. The microwave sensor consists of a planar two-port transmission line (TL) with a single complementary split-ring resonant (CSRR) inclusion etched from the bottom metallic layer. The CSRR sensor is placed on top of a customized non-conductive container. The microwave sensing setup has been designed, numerically demonstrated, fabricated and tested experimentally. Simulated results correlate quite well with the experimental data. Moreover, the sensitivity of the CSRR sensor when in close proximity to different RPW gender has been evaluated both numerically and experimentally. Based on the measured results from 15 RPW collected samples with different body sizes, different RPW gender types showed unique microwave signatures. Notable shift to the sensor's resonance frequency has been achieved, where on average a resonant frequency shift of 10% for adult RPWs was achieved, while 2.4% frequency change was obtained for larvae (young) RPWs. Hence, the proposed microwave sensing setup can be adopted in field trials to examine and differentiate between various RPW genders at various development stages.

Nonlinear catastrophes caused by geological fluids are a fundamental issue in rock mechanics and the geoengineering hazard field. For the consideration of hydrodynamic force on red-bed mudstone softening damage, X-ray visualization test on the fissure flow in mudstone block failure under hydrodynamic force was performed in this study based on block scale and the physical phenomena of fissure seepage and nonlinear diffusion were further explored. A new method for evaluating the hydro-damage degrees of rocks using an X-ray image analysis was proposed, and the quantitative relation of diffusion coefficients of hydro-damage and seepage was established. The research results revealed that the hydrodynamic force promoted the fluid-filled fissure behavior in mudstone specimen failure. Also, the seepage and diffusion phenomena of fluid in rocks during failures were indicated using X-ray imaging. A dual mechanical behavior was presented in the nonlinear seepage and abnormal diffusion of a red mudstone geological body under hydrodynamic conditions. The damaged degree of mudstone was aggravated by the effect of hydrodynamic force, and the initial seepage–diffusion coefficient with respect to lower hydro-damage was larger than the final seepage–diffusion coefficient with respect to higher hydro-damage of rocks with a decreasing nonlinear trend.

In this study, rheological properties of the bread wheat flour dough from 6 wheat genotypes were determined. For the pereparation of flour, 3 red bread (Pandas, Sagitorya, Pehlivan) and 3 white bread (Kaşifbey, Göktan, Ceyhan-99) were selected as wheat genotype. To determine the rheological properties of the wheat flour dough, farinograph, extensograph, mixolab and glutograph devices were used. According to the results of the Farinograph analysis, the average development time of wheat White and red genotypes were 1.95 minutes and 8.96 minutes, respectively. According to the extensograph results of the flour samples, the most extended stability value was determined with 7.47 min in Ceyhan-99 cultivar. As a result of the research, it was determined that flour yields of red bread varieties were higher other genotypes, gas retention capacities of white bread flours were showed high result in extensograph application and resistance of dough to elongation was higher. In the Mixolab analysis, it determined that white bread wheat varieties have higher values in terms of kneading properties and gluten properties, and red bread wheat varieties have higher values in values of viscosity, amylase value and starch retrogradation.

Red raspberry fruit production is increasing worldwide due to the growing consumer interest in foods with high antioxidant properties. However, raspberries are very perishable fruit with a short shelf life. Chitosan applications have shown promising results in promoting the storage of different berry fruit. This work aimed at analysing the effects of chitosan applied in pre- and/or post-harvest on the quality and antioxidant properties of raspberry fruit during the cold storage and room temperature conditions (i.e., 6 d at 4 °C and 3 d at 20 °C, respectively). Pre-harvest chi-tosan applications reduced fruit weight loss during cold storage and room temperature condi-tions but also reduced fruit decay at room temperature conditions. Furthermore, pre-harvest treatments with chitosan increased the total phenol and anthocyanin contents and promoted the highest total antioxidant activity with respect to other treatments. Of note, after the cold storage, post-harvest chitosan application drastically reduced the development of fungi that cause fruit decay, thus minimizing the potential risk of mycotoxin production. Overall, this study demon-strates that applications of chitosan in pre-harvest are sufficient to ensure the goal of maintaining and/or increasing the quality and antioxidant properties of fruit during cold storage and room temperature conditions.

Abundant animal manure in livestock areas has the potential to be used as organic fertilizer which can restore soil fertility by turning it into compost and biochar. The goal of this study was to as-sess how well soil fertility and red chili yield might be increased by using biochar and poschar made from various animal wastes. In this investigation, a factorial pattern and randomized block design were used. The first factor was the biochar treatment type, which included no biochar, biochar made from cow manure, biochar made from goat manure, and biochar made from chicken manure. The second factor was the type of poschar, which included no poschar, poschar made from cow manure, poschar made from goat manure, and poschar made from chicken manure. The findings of this study suggest that using biochar in conjunction with poschar can significantly improve soil parameters such as soil water content, pH, EC, humic acid, fulvic acid, C, N, P, K, and CEC. Red chilies grow and yield more per hectare when different types of biochar and poschar are used. The use of biochar from cow manure together with poschar from chicken manure shows the best agronomic effectiveness.

The effects of 0.4wt.% Sc addition on a typical Al-Si10-Mg alloy were systematically investigated in the present research. Samples with and without Sc produced refined dendritic arranged microstructures with sensitivity to the aging treatment after solidification, particularly in the case of the alloy without Sc. After being exposed to 300°C for 90 minutes, the dendritic spacing nearly doubled in the Al-10wt.%Si-0.45wt.%Mg samples. The rapidly solidified microstructures were constituted by the -Al dendritic phase surrounded by eutectic phases/intermetallics such as Si, Mg2Si and Al3Sc (in the case of the alloy containing Sc). 255°C and 300°C were deemed most appropriate temperatures for aging treatments, with four exposure times of up to 120 minutes tested for each alloy. The heat treatments allowed the Vickers hardness profiles to be plotted and compared. Moreover, in order to detect both Sc- and Mg- precipitates after aging, specific samples have been prepared for either SEM or TEM analyses. At first, the results pointed to a strong precipitate-related hardening effect formed as a result of the Sc addition to the alloy. All samples containing Sc showed a higher hardness value when compared to their respective treated samples without Sc. Secondly, when comparing the Al-10Si-Mg-Sc alloy samples among themselves after being treated at different conditions, high temperatures and excessive treatment times can become detrimental to the hardness. This was due to the growth of larger Sc-bearing precipitates of approximately 1 µm in size under such conditions, having less pronounced hardening effect. The best condition (255°C for 60 min) for as centrifuged samples in Cu-mold produced very fine dispersion of Mg- and Sc- intermetallics (~200 nm in size) with a peak hardness of 110 HV.

Macroautophagy/autophagy plays an important role in cellular copper clearance. The means by which the copper metabolism and autophagy pathways interact mechanistically is vastly unexplored. Dysfunctional ATP7B, a copper-transporting ATPase, is involved in the development of monogenic Wilson disease, a disorder characterized by disturbed copper transport. Using in silico prediction, we found that ATP7B contains a number of potential binding sites for LC3, a central protein in autophagy pathway, so-called LC3 interaction regions (LIRs). The conserved LIR3, located at the C-terminal end of ATP7B, was found to directly interact with LC3B in vitro. Replacing the two conserved hydrophobic residues W1452 and L1455 of LIR3 significantly reduced interaction. Furthermore, autophagy was induced in normal human hepatocellular carcinoma cells (HepG2) leading to enhanced colocalization of ATP7B and LC3B on the autophagosome membranes. By contrast, HepG2 cells deficient of ATP7B (HepG2 ATP7B-/-) showed autophagy deficiency at elevated copper condition. This phenotype was complemented by heterologous ATP7B expression. These findings suggest a cooperative role of ATP7B and LC3B in autophagy-mediated copper clearance.

: This paper presents a comparison between direct integer orders or classical model reference adaptive control (IO-DMRAC) versus its fractional orders counterpart (FO-DMRAC) applied to the F-16 aircraft longitudinal model pitch rate control. A substantial improvement is achieved when using fractional order adaptive control, since, in addition to performance indices, such as Integral Square-Error criterion (ISE) and Integral Square-Input criterion (ISU) being lower, the oscillations of the system output (pitch rate) in the transient period, are eliminated. Moreover, it is the first attempt in literature of adaptive control that a FO-DMRAC is applied to the pitch rate control of an aircraft. A F-16 short-period model, whose relative degree is equal to 1 (n^*=1) is analyzed by mean of simulations with good results. A FO-DMRAC is designed, for a specific operating flight conditions and compared with its IO-DMRAC counterpart. Furthermore, the boundedness of all signals, including the internal ones ω(t) are assured.

In this study, the potential of Fe3Al coating material as an environmentally friendly alternative to coatings containing critical elements for brake discs was investigated. A buffer layer of Cr-Mo steel (Ferro 55) was applied to enhance coating quality and prevent the formation of hot cracks during solidification. Microstructural analysis of the cross-section of the coating showed that the buffer layer diffused into the Fe3Al coating, forming a combination of Fe3Al, Fe, and Fe3AlC0.5 phases. The tribological properties of the Fe3Al coating were evaluated by pin-on-disc tests using two different copper-free friction materials extracted from commercial brake pads. The wear results showed a coefficient of friction comparable to that of an uncoated disc, but with a reduction in Particulate Matter (PM) emissions, an interesting aspect that is gaining increasing importance in view of the upcoming international standards..

ADHD, a neurodevelopmental condition, is distinguished by a triad of symptoms including inattention, hyperactivity, and impulsivity. It is frequently accompanied by comorbidities such as anxiety, depression, and learning disabilities. As a result, clinicians often face challenges in accurately diagnosing ADHD and differentiating it from other conditions. As a prospective remedy for ADHD, scientists have investigated Transcranial Direct Current Stimulation (tDCS), a non-invasive technique of stimulating the brain. It involves applying low-intensity electrical currents to specific regions of the brain to modulate neural activity. This review paper aims to provide an overview of the comorbidities associated with ADHD and the differential diagnosis of the condition. It also explores the potential of tDCS as a treatment option for ADHD, including its mechanisms of action and efficacy in improving ADHD symptoms. The comorbidities discussed in this review include anxiety disorders, mood disorders, and substance use disorders. These comorbidities are frequently seen in individuals with ADHD and can complicate the diagnosis and treatment of the condition. The paper also highlights the importance of considering comorbidities when assessing ADHD, as well as the potential impact of these conditions on treatment outcomes. The differential diagnosis section of the paper explores conditions that can present with symptoms similar to ADHD, such as anxiety disorders, mood disorders, and learning disabilities. It emphasizes the need for a thorough assessment and differential diagnosis to identify ADHD and differentiate it from other conditions accurately. The final section of the paper discusses the potential of tDCS as a treatment option for ADHD. It examines the mechanisms of action of tDCS and its efficacy in improving ADHD symptoms, including attention, hyperactivity, and impulsivity. It also explores the potential for tDCS to improve comorbid conditions associated with ADHD. Overall, this review provides a comprehensive overview of comorbidities and differential diagnoses in ADHD and the potential of tDCS as a treatment option. The paper highlights the importance of a thorough assessment and personalized treatment plan for individuals with ADHD, particularly those with comorbidities.

A hybrid smart process and material design system for nanoimprinting is proposed, which combines with a learning system based on experimental and numerical simulation results. Instead of carrying out extensive learning experiments for various condition, the simulation learning results are partially complimented where the results can be theoretically predicted by numerical simulation. In other word, the lacking data in experimental learning are complimented by simulation-based learning results. Therefore, the prediction of nanoimprint results under various conditions without experimental learning could be realized even for unknown materials. In this study, material and process design for a low-temperature nanoimprint process using glycerol-containing polyvinyl alcohol are demonstrated. Experimental results under limited conditions are learned to investigate optimum Glycerol concentrations and process temperatures. On the other hand, simulation-based learning is used to predict the dependence on press pressure and shape parameters. The prediction results for unknown Glycerol concentrations agreed well with the follow-up experiments.

Background: Transcranial direct current stimulation (tDCS) is a neuromodulatory technique that delivers low levels of a constant current via scalp electrodes to specifically targeted areas of the brain. The effects of tDCS on whole-body exercise performance has been of interest in recent literature. The purpose of the current investigation was to investigate if tDCS, administered via Halo Sport, influences time trial performance in trained cyclists, and if changes in exercise performance are associated with prefrontal cortex (PFC) activation and/or muscle oxygenation (SmO2). Methods: Twelve recreationally trained cyclists volunteered to participate in two 10-kilometer time trials following 20 minutes of tDCS or a sham condition. Results: T-tests showed there was no significant difference in performance (time to completion) or physiological measures (BLa-, HR, SmO2, PFC oxygenation) between the Halo and sham conditions. Conclusions: These results indicate that the application of tDCS via Halo Sport does not induce changes in exercise performance or related physiological parameters during a 10-kilometer cycling time trial.

Accurate and timely testing has become an essential measure in combatting the COVID-19 global pandemic. Currently, polymerase chain reaction (PCR) based assays are the most relied on methods for SARS-CoV-2 detection. This traditional workflow involves a viral RNA extraction from the viral transport media storing nasopharyngeal swabs collected from patients, followed by PCR based detection. While accurate, this methodology is time consuming and resource heavy, causing for delays in receiving results or limited access to testing. Herein, we demonstrate a validated method for SARS-CoV-2 detection from viral transport media using a two-step, direct-to-PCR workflow revolving around shaker-mill homogenization. This method completely bypasses the extraction steps of the traditional workflow, replacing it with 30 seconds of mechanical disruption sufficient to allow for COVID-19 detection with a 96.43% sensitivity and 100% specificity when compared to traditional extraction to PCR based methods.

The current framework of evolutionary theory postulates that evolution relies on random mutations generating a diversity of phenotypes on which natural selection acts. This framework was established using a top-down approach as it originated from Darwinism, which is based on observations made on complex multicellular organisms, and then modified to fit a DNA-centric view. In this article, I argue that, based on a bottom-up approach starting from the physicochemical properties of nucleic and amino acid polymers, we should reject the facts that: i) natural selection plays a dominant role in evolution, and ii) the probability of mutations is independent of the generated phenotype. I will show that the adaptation of a phenotype to an environment does not correspond to organism fitness but rather corresponds to maintaining the genome stability and integrity. In a stable environment, the phenotype maintains the stability of its originating genome, and both (genome and phenotype) are reproduced identically. In an unstable environment (i.e., corresponding to variations in physicochemical parameters above a physiological range), the phenotype no longer maintains the stability of its originating genome but instead influences its variations. Indeed, environment- and cellular-dependent physicochemical parameters define the probability of mutations in terms of frequency, nature and location in a genome. Evolution is non-deterministic because it relies on probabilistic physicochemical rules, and evolution is driven by a bidirectional interplay between genome and phenotype, the phenotype ensuring the stability of the genotype in a cellular and environment physicochemical parameter-depending manner.

Aaron Copland’s only full-length opera, The Tender Land has had a difficult production history. Critics of the 1954 New York City Opera Premiere bemoaned the atypical storyline, the music declared too dry, and the singing too sparse. The opera’s failure to dazzle initial audiences is likely because it was originally written for television. Copland was commissioned to write this opera for television in 1952, but was rejected by NBC in 1953, with no official explanation given as to why. The New York City Opera premiere, therefore, was not an accurate representation of Aaron Copland's vision. The opera eventually did find receptive audiences, each success marked by a smaller, more intimate venue, not unlike the intimacy afforded on a sound stage. Perhaps most notable of these was the touring 1993 University of Minnesota production that performed in barns and farmhouses throughout the Midwest. Through this tour, the opera reached a rural community mirrored in the story, providing much more opportunity for the audience to connect to the characters. However, the question remains what caused NBC to initially reject the opera. This paper exposes the likely political obstacles that prevented Copland’s opera from premiering in its intended medium, and the subsequent consequences of displacing The Tender Land from its television premiere.

Several red seaweeds have shown to inhibit enteric CH₄ production; however, adaptation of fermentation parameters to their presence is not well understood. The objective of this study was to examine the effect of three red seaweeds (Asparargopsis taxiformis, Mazzaella japonica, Palmaria mollis) on in vitro fermentation, CH₄ production, and adaptation using the rumen simulation technique (RUSITEC). The experiment was conducted as a completely randomized design with four treatments, duplicated in two identical RUSITEC apparatus equipped with eight fermenter vessels each. The four treatments included the control (barley straw and barley silage) and the three red seaweeds added to the control diet at 2% diet DM. The experimental period was divided into four phases including a baseline phase (d 0-7; no seaweed included), adaptation phase (d 8-11; seaweed included in treatment vessels), intermediate phase (d 12-16) and a stable phase (d 17-21). The digestibility of organic matter (P = 0.04) and neutral detergent fibre (P = 0.05) was decreased by A. taxiformis during the adaptation phase, but returned to control levels in the stable phase. A. taxiformis supplementation resulted in a decrease (P < 0.001) in molar proportions of acetate, propionate and total volatile fatty acid (VFA) production, with an increase in molar proportions of butyrate, caproate, and valerate; the other seaweeds had no effect (P > 0.05) on molar proportions or production of individual VFA. A. taxiformis was the only seaweed to suppress CH₄ production (P < 0.001), with the suppressive effect increasing (P < 0.001) across phases. Similarly, A. taxiformis increased (P < 0.001) the production of hydrogen (H₂, %, mL/d) across the adaptation, intermediate and stable phases, with the intermediate and stable phases having greater H₂ production than the adaptation phase. In conclusion, M. japonica and P. mollis did not impact rumen fermentation or inhibit CH₄ production within the RUSITEC. In contrast, we conclude that A. taxiformis is an effective CH₄ inhibitor and its introduction to the ruminal environment requires a period of adaptation; however, the large magnitude of CH₄ suppression by A. taxiformis inhibits VFA synthesis, which may restrict production performance in vivo.

A small but growing body of literature suggests that outdoor experiences during childhood affect environment-related behaviors in adulthood. However, research on the magnitude of the effect (effect size) of outdoor experience on learners’ behaviors remains scarce. In this study, we explore the extent to which outdoor experiences associate with environmentally responsible behaviors. Our sample consisted of 143 ninth- and tenth-grade students living on a Greek island. The data were collected using a properly adjusted environmental literacy instrument. Two different methodological pathways, i.e., a quasi-experimental approach and correlation analysis, were used to analyse the data. A tentative variable representing the frequency and intensity of students’ experiential contact with nature was found to be the strongest available predictor of their self-reported pro-environmental behaviors. The findings of this study support the significance of outdoor, experiential learning during childhood in shaping individuals’ environmental behaviors.

Patterning, stability, and dispersion of the semiconductor quantum dots (scQDs) are the three issues strictly interconnected for successful device manufacturing. Recently several authors adopted direct optical patterning (DOP) as a step forward in photolithography to position the scQDs in a selected area. However, the chemistry behind the stability, dispersion, and patterning has to be carefully integrated to obtain a functional and therefore, commercial device. In this review are described different chemical strategies suitable to stabilize the scQDs both at a single level and as an ensemble with a special focus on the ones compatible with direct optical patterning (DOP). With the same purpose, the scQDs dispersion in a matrix was described in terms of the scQDs surface ligands interactions with the matrix itself. The chemical processes behind the DOP are illustrated and discussed for five different approaches that consider together stability, dispersion, and the patterning itself of the scQDs.

With Direct Laser Writing (DLW) maturing in all aspects as a manufacturing technology a toolset for quality assurance must be developed. In this work we want to introduce a first of its kind test artifact. Test artifacts are standardized 3D models with specific geometric feature to evaluate the performance of writing parameters. Test artifacts are already common in other 3D additive manufacturing technologies e.g. Selective Laser Melting. The test artifact introduced in this work was developed in particular to accommodate 1) the high geometrical resolution of DLW structures and 2) the limited possibilities to examine the resulting structure. Geometric accuracy, surface adhesion as well as confocal raman spectroscopy results were considered when evaluating the design of the test artifact. We will explain the individual features and design considerations of our DLW test artifact. The difference between two slicers, Cura and 3DPoli, and the implications on measured feature sizes and the general shape is quantified. The measured geometries are used to derive a general design guide for a specific combination of photoresist, laser power and scanning speed and to analyse the geometric accuracy of a structure produced using these guidelines.