The node position information is critical in the wireless sensor network (WSN). However, the existing positioning algorithms commonly have low positioning accuracy because of noise interferences in communication. To solve this problem, this paper presents an iterative positioning model based on distance correction to improve the positioning accuracy of the target node in WSN. First, the log-distance distribution model of received signal strength indication (RSSI) ranging is built and the noise impact factor is derived based on the model. Second, the initial position coordinates of the target node are obtained based on the triangle centroid localization algorithm, thereby calculating the distance deviation coefficient under the influence of noise. Then, the ratio of the distance measured by the log-normal distribution model to the median distance deviation coefficient is taken as the new distance between the anchor node and the target node. Based on the new distance, the triangular centroid positioning algorithm is used again to calculate the target node coordinates. Finally, the iterative positioning model is constructed, and the distance deviation coefficient is updated repeatedly to update the positioning result until the set number of iterations is reached. Experiment results show that the proposed iterative positioning model can improve positioning accuracy effectively.

The aim of the current study has been to assess externalizing problems from a gender perspective in the juvenile population. This objective has been evaluated though the Child and Adolescent Assessment System questionnaire (SENA), to measure the dimension of externalized problems. A total of 128 Spanish students took part in the survey, comprising 58 (45.3%) male and 67 (52.3%) female, aged between 12 and 16 years old (M= 13,7; Sd= 1,14). The sample was taken from three High- Schools (state and private-subsidized) in Madrid, Spain. The research for this study was conducted through a descriptive, inferential, quantitative, ex post facto design. The data analysis was performed using SPSS 27.0. The result revealed an increase in externalized problems: Attention (M= 2.65, Sd=.88), Anger Control (M= 2.27, Sd=.85) and Hyperactivity- Impulsivity (M= 2.26, Sd=.68). In addition, female students score highly in Attention Problems (F= 4.124; Sig.: .004), Hyperactivity-Impulsivity (F: 6.18; Sig.: <.001), and Anger Control (F: 2.3; Sig.: .062). This study highlights the impact and increase on students externalized mental health problems currently. It is essential to have a protective environment and promote the development of emotional intelligence, encouraging the mental health in young people. This article is part of the findings of the research project “Therapeutic Innovation Classroom for the accompaniment of teenager with Serious Mental Disorder” (Reference: 2021V/EU-UNED/02).

In electromagnetic ultrasonic testing, it is difficult to recognize small-size bottom cracks by time of flight (ToF), and the lift-off fluctuation of the probe affects the accuracy and consistency of the inspection results. In order to overcome the difficulty, a novel EMAT (electromagnetic acoustic transducer)-PEC (pulse eddy current) composite sensor is designed. We use amplitude of bottom echo recorded by EMAT to identify the tiny bottom crack as well as the amplitude of PEC signals picked up by the integrated symmetric coils to measure the average lift-off of the probe in real time. Firstly, the effects of lift-off and bottom cracks on amplitude of bottom echo are distinguished combining the theoretical analysis and finite element method (FEM). And then an amplitude correction method based on the fusion of EMAT and PEC signals is proposed to reduce the impact of lift-off on the defect signal. The experimental results demonstrate that the designed composite sensor can effectively detect the bottom crack as small as 0.1mm* 0.3mm. The signal fusion method can accurately correct the amplitude of defect signal and the relative error is less than ±8%.

In order to correct attenuated millimeter-wavelength (Ka-band) radar data and address the problem of instability, an attenuation correction methodology (attenuation correction with variation trend constraint; VTC) was developed. Using synchronous observation conditions and multi-band radars, the VTC method adopts the variation trends of reflectivity in X-band radar data captured with wavelet transform as a constraint to adjust reflectivity factors of millimeter-wavelength radar. The correction was evaluated by comparing reflectivities obtained by millimeter-wavelength cloud radar and X-band weather radar. Experiments showed that attenuation was a major contributory factor in the different reflectivities of the two radars when relatively intense echoes exist, and the attenuation correction developed in this study significantly improved data quality for millimeter-wavelength radar. Reflectivity differences between the two radars were reduced and reflectivity correlations were enhanced. Errors caused by attenuation were eliminated, while variation details in the reflectivity factors were retained. The VTC method is superior to the bin-by-bin method in terms of correction amplitude and can be used for attenuation correction of shorter wavelength radar assisted by longer wavelength radar data.

Climate simulations in West Africa have been attributed with large uncertainties. Global climate projections are not consistent with changes in observations at the regional or local level of the Niger basin, making management of hydrological projects in the basin uncertain. This study evaluates the potential of using the quantile mapping bias correction to improve the Coupled Model Intercomparison Project (CMIP5) outputs for use in hydrology impact studies. Rainfall and temperature projections from 8 CMIP5 Global Climate Models (GCM) were bias corrected using the quantile mapping approach. Impacts of climate change was evaluated with bias corrected rainfall, temperature and potential evapotranspiration (PET). The IHACRES hydrological model was adapted to the Niger basin and used to simulate impacts of climate change on discharge under present and future conditions. Bias correction significantly improved the accuracy of rainfall and temperature simulations compared to observations. Nash coefficient (NSE) for monthly rainfall comparisons of 8 GCMs to the observed was improved by bias correction from 0.69 to 0.84. The standard deviations among the 8 GCM rainfall data were significantly reduced from 0.13 to 0.03. Increasing rainfall, temperature, PET and river discharge were projected for all GCMs used in this study under the RCP8.5 scenario. These results will help improving projections and contribute to the development of sustainable climate change adaptation strategies.

With increasing research focus on industrial anomaly detection, numerous methods have emerged in this domain. Notably, memory bank-based approaches, coupled with kNN distance metrics, have demonstrated remarkable performance in anomaly detection (AD) and anomaly segmentation (AS). However, upon examination of the Back to the Feature (BTF) method applied to the Mvtec-3D AD dataset, it was observed that while it exhibited exceptional segmentation performance, its detection performance was lacking. To address this discrepancy, this study base improves the implementation of BTF, especially the improvement of the anomaly score metric. It posits that different "clusters" necessitate distinct k values in kNN distance metrics. For simplify, this assumption is distilled into the proposition that AD and AS tasks impose differing requirements on the k value in kNN distance metrics. Consequently, the paper introduces the BTM method, which utilizes distinct distance metrics for AD and AS tasks. This innovative approach yields superior AD and AS performance (I-AUROC 93.0%, AURPO 96.9%, P-AUROC 99.5%), representing a substantial enhancement over the BTF method (I-AUROC 5.7% ↑, AURPO 0.5% ↑, P-AUROC 0.2% ↑).

Natural polluted insulator surfaces are always coated with various kinds of soluble constituents, and those constituents affect flashover performance differentially. Currently this fact is not considered either in laboratory experiments or field pollution degree measurements, causing the existing insulation selection method to be deficient. In this paper a systematical research on insulator flashover voltage gradient correction involving types of soluble pollution constituents was presented. Taking typical type glass insulator as the sample, its flashover tests polluted by typical soluble chemicals NaCl, NaNO₃, KNO₃, NH₄NO₃, MgSO₄, Ca(NO₃)₂ and CaSO₄ were carried out. Then the flashover gradient correction was made combining the flashover performance of each soluble constituent, the ESDD contribution of the seven constituents, as well as the saturation performance of CaSO₄. The correction was well verified with the flashover test results of insulator polluted by three types of soluble mixture. Research results indicate that the flashover gradient correction method proposed by this paper performs well in reducing the calculating error. It is recommended to carry out component measurements and flashover gradient correction to better select outdoor insulation configuration.

The correct selection of the value of p is a complex and iterative procedure that requires experience in the interpretation of the obtained interpolated maps. Inverse Distance Weighting is a method applied to the porosities of the K and L hydrocarbon reservoirs, discovered in the Neogene (Lower Pontian) subsurface sandstones in the northern Croatia (Pannonian Basin System). They represent small and large data samples. Also a standard statistical analysis of the data was made, followed by the qualitative-quantitative analysis of the maps, based on the selection of different values of the power distance exponent (p-value) for the K and L reservoirs maps. According to the qualitative analysis, for a small data set, p-value could be set on 1 or 2 giving the most optimal result, while for a large data set, a p value of 3 and 4 could be applied. By quantitative analysis, for the case of small data p=2 is recommended, resulting in a root mean square error value of 0.03458, a mean absolute error of 0.02013 and a median absolute deviation of 0.00546. Oppositely, a p-value of 3 and 4 is selected as appropriate for a large data set, with root mean square errors of 0.02435 and 0.02437, mean square errors of 0.01582 and 0.01509 and median absolute deviations 0.00896 and 0.00444. Eventually for a small data set, it is recommended to use a p-value of 2, and for a large data set, a p-value of 3 or 4.

Continuous-wave photocathode guns are capable of delivering electron beams with high repetition rates and high average currents. However, they are limited by relatively low accelerating gradients and cathode fields. This limitation leads to a larger beam size at the gun exit due to space charge forces, making the beam more sensitive to optical aberrations and posing challenges for low-emittance electron beam transmission. This paper focuses on the aberrations induced by multipole fields. We analyze the effects of quadrupole, sextupole, and higher-order fields on beam profile and transverse emittance and propose a beam-based method for the rapid characterization and correction of these multipole fields. Furthermore, we present an experimental study conducted on the DC-SRF-II photocathode gun equipped with dedicated correctors. Both simulation and experimental results demonstrate that our approach effectively mitigates beam aberrations caused by multipole fields, resulting in improved beam symmetry and reduced emittance.

The increase in the frequency of droughts in Africa has increased the interest in crops with drought escape mechanisms like grain Amaranth (Amaranthus hypochondriacus). However, the white-seeded grain Amaranth is easily cross-pollinated by its black seeded wild relatives such as smooth pigweed (Amaranthus hybridus). A study to investigate a minimum isolation distance enough to prevent seed contamination study was carried out at three sites namely Gweru and Bindura (2020/2021 rainy season) and Shamva (2021/2022 rainy season). Smooth pigweed was planted at distances of 3 to 150 m from pure grain Amaranth. Close monitoring of phenology and measurement of meteorological conditions such as temperature, wind speed and direction were done during the anthesis period. Cross-pollination in grain Amaranth was influenced by distance from the pollen source. A maximum of 12.9 % contamination rate was measured within the 10 m radius from the pollen donor plot and a minimum outcrossing rate of 0.45 % was recorded at the widest distance of 150 m. It can be concluded that complete removal of wild relatives of grain Amaranth is important within the field at as far as 150 m from the crop.

We propose two methods for obtaining estimations on the minimum distance and covering radius of orthogonal arrays. Both methods are based on knowledge about the (feasible) sets of distance distributions of orthogonal arrays with given length, cardinality, factors and strength. New bounds are presented either in analytic form and as products of an ongoing project for computation and investigation of the possible distance distributions of orthogonal arrays with parameters in doable ranges.

The purpose of this study is to show an automated laser vision correction (LVC) with the transep-ithelial refractive keratectomy (TransPRK) surgery technique. Since more surgical steps have been automated over the years, we have standardized the TransPRK technique. We have been using it since 2010. This paper aims to illustrate the processes that are readily applicable to automation. To meet the patient's expectations and ensure that the patient has uncorrected visual acuity at least equal to the preoperative corrected vision with glasses, patient selection is crucial in refractive surgical procedures. One major benefit of automating the surgery is that it can be performed in a similar way by each surgeon or laser correction centre, so once the standard and results are good, these can be per-formed by different surgeons.

Smartwatches are one of the most relevant fitness trends of the past two decades, and they collect increasing amounts of health and movement data. The accuracy of these data may be questionable and requires further investigation. Therefore, the aim of the present study is to validate smartwatches for use in triathlon training. Ten different smartwatches were tested for accuracy in measuring heart rate, distance (via global navigation satellite systems, GNSS), swim stroke rates and the number of swim laps in a 50 m Olympic-size pool. The optical heart rate measurement function of each smartwatch was compared to that of a chest strap. Thirty participants (15 females, 15 males) ran five 3-minute intervals on a motorised treadmill to evaluate the accuracy of the heart rate measurements. Moreover, for each smartwatch, running und cycling distance tracking was tested over six runs of 4,000 m on a 400 m tartan stadium track, six hilly outdoor runs over 3.4 km, and four repetitions of a 36.8 km road bike course, respectively. Three swimming protocols ranging from 200 m to 400 m were performed in triplicate in a 50 m Olympic-size pool, evaluating tracked distance and detected number of strokes. The mean absolute percentage errors (MAPEs) for the average heart rate measurements varied between 3.1% and 8.3%, with the coefficient of determination ranging from 0.22 to 0.79. MAPE results ranged from 0.8% to 12.1% for the 4,000 m run on the 400 m track, from 0.2% to 7.5% for the 3.4 km outdoor run, and from 0.0% to 4.2% for the 36.8 km bike ride. For the swimming tests, in contrast, the deviations from the true distance varied greatly, starting at a 0.0% MAPE for the 400 m freestyle and reaching 91.7% for the 200 m medley with style changes every 25 m. In summary, for some of the smartwatches, the measurement results deviated substantially from the true values. Measurements taken while road cycling over longer distances with only a few curves were in relative terms more accurate than for outdoor runs and even more accurate than for the 400 m track. In the swimming exercises, the accuracy of the measured distances was severely deteriorated by the medley changes among the majority of the smartwatches. Altogether, the results of this study should help in assessing the accuracy and thus suitability of smartwatches for general triathlon training.

Atmospheric correction is the processes of converting radiance measured at a spectral 1 sensor to the reflectance of the materials in a multispectral or hyperspectral image. This is an 2 important step for detecting or identifying the materials present in the pixel spectra. We present 3 two machine learning models for atmospheric correction trained and tested on 100,000 batches of 40 4 reflectance spectra converted to radiance using MODTRAN, so the machine learning model learns 5 the radiative transfer physics from MODTRAN. We created a theoretically interpretable Bayesian 6 Gaussian process model and a deep learning autoencoder treating the atmosphere as noise. We 7 compare both methods for estimating gain in the correction model to the well-know QUAC method 8 of assuming a constant mean endmember reflectance. Prediction of reflectance using the Gaussian 9 process model outperforms the other methods in terms of both accuracy and reliability.

We propose a quantum version of the well known minimum distance classification model called "Nearest Mean Classifier" (NMC). In this regard, we presented our first results in two previous works. In [34] a quantum counterpart of the NMC for two-dimensional problems was introduced, named "Quantum Nearest Mean Classifier" (QNMC), together with a possible generalization to arbitrary dimensions. In [33] we studied the n-dimensional problem into detail and we showed a new encoding for arbitrary n-feature vectors into density operators. In the present paper, another promising encoding of n-dimensional patterns into density operators is considered, suggested by recent debates on quantum machine learning. Further, we observe a significant property concerning the non-invariance by feature rescaling of our quantum classifier. This fact, which represents a meaningful difference between the NMC and the respective quantum version, allows to introduce a free parameter whose variation provides, in some cases, better classification results for the QNMC. The experimental section is devoted to: i) compare the NMC and QNMC performance on different datasets; ii) study the effects of the non-invariance under uniform rescaling for the QNMC.

The sustainability of ecotourism is the backbone of tourism development of a country. Ecotourism can contribute to both conservation and development in which involves dynamic relationship between tourism, biodiversity and communities, facilitate by great management. The purpose of this study is to analyze the dimensions of the socio-economic and environmental impacts of ecotourism in communities surrounding the Tasik Kenyir in Terengganu, Malaysia. This study provides a framework for the development and evaluation of ecotourism. The framework will determine if the relationships between indicators are positively correlated which will result in positive contribution to the other by using System Dynamic. Socio-cultural and economic data will be collected through interviews and group discussions in selected communities in Tasik Kenyir. Data on wildlife will be extracted from secondary data from Kenyir Research Institute, Universiti Malaysia Terengganu. The data analysis will explore the socio-cultural and economic differences between and within different communities due to ecotourism development, the contribution of ecotourism to conservation activities, local support for conservation and ecotourism as well as the influence of tourist activities on the distribution of wildlife species in Tasik Kenyir. This study aims to contribute toward understanding the natural resource community-ecotourism inter-relationship and help to bridge the knowledge gap that hinders biodiversity conservation initiatives. The findings will be used as a base for further development of ecotourism and will recommend alternative management options where necessary for the study area.

At the beginning of 2020, with the onset of the pandemic, the traditional learning environment for learners drastically changed globally. Since then, most students/teachers have started and practiced distance and virtual learning/teaching. Thus, a technological breakthrough in virtual learning has followed. In connection with this, many countries worldwide have commenced allocating additional financing and funds for educational institutions' technological improvement and development. The long-term stay in distance learning has revealed and highlighted new problems students face: their knowledge level has decreased, they lack socialization skills, and they face psychological and physical health problems. Due to this negative impact on students, a need to research and evaluate how much the EU countries allocated to solve the distance learning-caused problems and what programs or models they prepared has emerged and encouraged further studies. The research has found that many countries increased their allocations very minimally, e.g., 0.0.1%, but some increased their available budgets to 32%. Notably, most countries did not separate distance learning exit funding from distance learning preparation funding. Based on the problems the countries saw, only a few states identified withdrawal from distance learning as a problem. Considering this, we set ourselves the goal to evaluate exit models from distance learning and allocated funding amounts. The following objectives were planned to achieve the goal: · to evaluate the global practice of exit from distance learning; · to determine the scope of funding for pandemic management; · to evaluate the amounts of funding allocated to manage pandemic-caused consequences and the GDP ratio. Research methods: mathematical-statistical analysis, empirical analysis, and analysis of scientific literature.

Bonchev and Trinajstic defined two distance based entropy measures to measure the molecular branching of molecular graphs in 1977 [Information theory, distance matrix, and molecular branching, J. Chem. Phys., 38 (1977), 4517–4533]. In this paper we use these entropy measures which are based on distance matrices of graphs. The first one is based on distribution of distances in distance matrix and the second one is based on distribution of distances in upper triangular submatrix. We obtain the two entropy measures of paths, stars, complete graphs, cycles and complete bipartite graphs. Finally we obtain the minimal trees with respect to these entropy measures with fixed diameter.

We describe quantum correction to the accreting hot plasma onto black holes. The accreting black holes are surrounded by the very hot ionized plasma. This plasma is heated inevitably by the outgoing photons of the quantum Hawking radiation. It is demonstrated that Hawking radiation prevails over the Compton scattering of hot electrons in the accreting flow onto the small enough evaporating black holes.

In this paper, we study the relativistic correction to Bekenstein-Hawking entropy in the canonical ensemble and isothermal-isobaric ensemble and apply it to the cases of non-rotating BTZ and AdS-Schwarzschild black holes. This is realized by generalizing the equations obtained using Boltzmann-Gibbs(BG) statistics with its relativistic generalization, Kaniadakis statistics, or κ-statistics. The relativistic corrections are found to be logarithmic in nature and it is observed that their effect becomes appreciable only in the high-temperature limit suggesting that the entropy corrections must include these relativistically corrected terms while taking the aforementioned limit. The non-relativistic corrections are recovered in the κ → 0 limit.

For a long time, physicists always directly use mathematical tools to deal with physical problems, and few people pay attention to the difference between mathematical theory and physical theory. Just like the dilemma that physicists once faced when dealing with the problem of blackbody radiation function.By analyzing the difference between the theoretical basis of mathematics and the theoretical basis of physics, this paper draws the following conclusions: (1) The theoretical basis of mathematics and the theoretical basis of physics are different, so when we use mathematical tools for physics research, we need to be very careful. (2) Finiteness and discreteness should be the basis of the whole physical theory; This paper points out that it is not advisable to use infinite " " and infinitesimal "0" without restriction and demonstration in physics, as well as the continuity of functions, which will bring a lot of trouble to physical theory.At the same time, through the analysis of Banach-Tarski paradox and Bertrand paradox, this paper proposes that if we revise the basic assumptions of probability theory: assuming that "points" have quantized sizes, and "lines" also have quantized widths. After the correction, we can not only avoid the troubles caused by Bertrand paradox, but also make probability theory better for practical application.

Pandemics, and other risk-related contexts, require dynamic changes in behavior as situations develop. Human behavior is influenced by both explicit (cognitive) and implicit (intuitive) factors. In this study, we used psychological distance as a lens to understand what influences our decision-making with regards to risk in the context of COVID-19. The study was based on the rationale that our relational needs are more concrete to us than the risk of the virus. First, we explored the impact of social-psychological distance on participants’ risk perceptions and behavioral willingness. As hypothesized, we found that close social relationships of agents promoted willingness to engage in risky behavior. In the second phase, we tested an intervention designed to increase the concreteness of information about virus transmission as a mechanism to mitigate the bias of social influence. We found that the concreteness intervention resulted in significantly reduced willingness to engage in risky behavior. As such, communications aimed at changing the behavior of citizens during times of increased risk or danger, should consider conceptually concrete messaging when communicating complex risk, and hence may provide a valuable tool in promoting health-related behavior.

Let G[F,Vk, Huv] be the graph with k pockets, where F is a simple graph of order n ≥ 1,Vk= {v1,v2,··· ,vk} is a subset of the vertex set of F and Hvis a simple graph of order m ≥ 2,v is a specified vertex of Hv. Also let G[F,Ek, Huv] be the graph with k edge pockets, where F is a simple graph of order n ≥ 2, Ek= {e1,e2,···ek} is a subset of the edge set of F and Huvis a simple graph of order m ≥ 3, uv is a specified edge of Huvsuch that Huv− u is isomorphic to Huv− v. In this paper, we derive closed-form formulas for resistance distance and Kirchhoff index of G[F,Vk, Hv] and G[F,Ek, Huv] in terms of the resistance distance and Kirchhoff index F, Hv and F, Huv, respectively.

A description of the motion in Non-Inertial Reference Frames by means of the inclusion of high time derivatives is studied. It is noted that incompleteness of the description of physical reality is a problem of any theory: both quantum mechanics and classical physics. The "stability principle" is put forward. We also provide macroscopic examples of Non-Inertial Mechanics and verify the use of high-order derivatives as non-local hidden variables based the equivalence principle when acceleration is equal to the gravitational field. Acceleration in this case is a function of the higher derivatives with respect to time. The definition of Dark Metrics for matter and energy is presented to replace the standard notions of Dark Matter and Dark Energy.

Atmospheric correction is a necessary step in image processing data and spectra recorded by spaceborne sensors for pure cloudless atmosphere, primarily in the visible and near-IR spectral range. We have present a fast and sufficiently accurate method of atmospheric correction based on the proposed analytical solutions describing with high accuracy the spectrum of outgoing radiation at the top boundary of the cloudless atmosphere. This technique includes the model of the atmosphere and its optical parameters that are important in terms of radiation transfer. The solution of the inverse problem for finding unknown parameters of the model is carried out by the method of non-linear least squares (Levenberg-Marquardt algorithm) for an individual selected pixel of the image (its spectrum), taking into account the adjacency effects. Using the found parameters of the atmosphere and the average surface albedo, assuming homogeneity of the atmosphere within a certain area of the hyperspectral image (or the whole frame), the spectral albedo at the Earth's surface is calculated for all other pixels. It is essential that the procedure of the numerical simulation with non-linear least squares of the direct transfer problem is based on using analytical solutions, which provides a very short calculation time of the atmospheric parameters (seconds or less) and the ability to perform atmospheric correction "on-fly." Testing methods of atmospheric correction was performed using the synthetic outgoing radiation spectra at the top of the atmosphere (TOA), obtained by numerical simulation in the LibRadTran code, as well as spectra of real space images of the Hyperion hyperspectrometer. A comparison with the results of atmospheric correction in module FLAASH of ENVI package has been performed. Finally, to validate our data obtained by the SHARK method, a comparative analysis with ground-based measurements of Radiometric Calibration Network (RadCalNet) was carried out.

Background: Mental health has a special relevance in adolescence. Therefore, this study aimed to analyze the possible association between emotional distress and suicidal ideation among adolescents. Methods: The article presents the results of a survey of secondary school students (N=1419) in the city of Tarragona, Spain. The aim of the analysis was to verify the existence of an association between suicidal ideation and risk factors such as emotional distress and low self-esteem. All the data were also analysed to determine the existence of statistically significant differences between girls and boys. Bivariate analyses were performed with chi-square, point-biserial coefficient and non-parametric tests for independent groups. Logistic regression analysis was also performed to calculate the probability of suicidal ideation. Results: These analyses showed that both emotional distress and low self-esteem increase the likelihood of suicidal ideation among adolescents. This was more evident among boys with high levels of emotional distress. Conclusion: Schools should develop suicide ideation prevention programs for adolescents based on situations that cause emotional distress.

This study explores the dependence of drone acoustic detection systems performance on distance, using learning machines with different complexities, from simple linear discriminants, to deep neural networks, such as YAMNet, which exploits transfer learning. Other machine learning systems studied are the multilayer perceptron, support vector machines and random forest. These methods have been evaluated with a meticulously selected database that includes a wide variety of drone and interference sounds, previously processed by array signal processing and affected by ambient noise. Two strategies for training learning machines are considered. In the first one, they are trained with unattenuated signals, trying to preserve the information generated by the sound sources, but they are tested considering the attenuation with distance, achieving effective detection at distances up to 200 metres with some methods, especially linear discriminant. In all cases, the existence of interferences that hinder detection is considered. In the second strategy, the systems are trained and tested with attenuated signals as a function of distance. The effective detection range increases up to 300 metres for most methods and up to 500 metres for the YAMNet based detector. In addition, this second approach raises the possibility of developing specialised detectors for each distance range, thus significantly extending the effective detection range. These results underline the promising potential of acoustic detection of drones at various distances, encouraging further exploration in this research area.

This study aims to identify benefits and barriers to distance education, particularly from the perspective of teachers in Saudi Arabia. As the applied data collection tool, a questionnaire was distributed to the general education teachers in three districts. The sample size of the study was 1076 teachers. The results revealed that despite several benefits gained from distance learning, there are also some barriers. Teachers found that the most important advantage in distance learning is the acquisition of technical skills during the online teaching processes, they learn more and use digital education platforms, they have sufficient time to prepare the scientific content, they were able to provide adequate technical solutions for their courses, and they have the opportunity to use multiple media to deliver their courses. With the introduction of distance learning, teachers have explored new ways to deliver course contents to students. It has fostered better ways to provide more interactive real-time and on-demand teaching and learning using modern technology, thus, helping teachers become familiar with the use of electronic resources. It seems that teachers invest in technical methods to enhance students’ performance. Also, teachers reported some obstacles that they face during remote teaching. Most of these problems are connection problems applied with devices and the internet, lack of students’ motivation to learn in distance, problems associated with urban learners.

Human number understanding is thought to rely on the analogue number system (ANS), working according to Weber’s law. We propose an alternative account, suggesting that symbolic mathematical knowledge is based on a discrete semantic system (DSS), a representation that stores values in a semantic network, similar to the mental lexicon or to a conceptual network. Here, focusing on the phenomena of numerical distance and size effects in comparison tasks, first we discuss how a DSS model could explain these numerical effects. Second, we demonstrate that DSS model can give quantitatively as appropriate a description of the effects as the ANS model. Finally, we show that symbolic numerical size effect is mainly influenced by the frequency of the symbols, and not by the ratios of their values. This last result suggests that numerical distance and size effects cannot be caused by the ANS, while the DSS model might be the alternative approach that can explain the frequency-based size effect.

This study aims to unravel the paradox of perceptions and knowledge of the flood victims towards the causes of the disaster in both internal and external context. Internal context comprises of a comparison of perceptions and knowledge based on individual characteristics (age, gender, education and income). Whereas, the external context includes the factors of the awareness of the victims towards the amount of rainfall, the impact of land use changes as well as the negligence of the responsible parties. The main objective of this study is to determine the differences of perception and knowledge of December 2014 flood victims in Kelantan towards the factors that lead to the flood. This disaster had resulted in huge amount of money loss as well as traumatize the victims in which can be felt to this day. Since that incident, there were various points of view and different perceptions in finding the cause of the disaster occurred. Besides that, the study found that the level of perception and knowledge as to the cause of the disaster is different in the internal context (individual characteristics). This difference has a significant influence on the awareness of the causes of the floods that occurred in the external context. Significant relationships at the level of p <0.05 has existed between perception and knowledge of the causes of the disaster victims affected by environmental changes in the last 10 years. This indicates that although the victim is aware of the physical environment changes happening around them, but all that is seen as not a major contributing factor to the cause of the floods in Kelantan in 2014.

In this paper, we show that the entropy or information flow of a gravitational system constrains the dependence of gravitational force on radial distance r which for very large r is equivalent to gravity in two dimensions. This proposal solves the problem of flat rotation curves of galaxies at very large distances.

This paper explores the influence of GenAI chatbot (ChatGPT) and AI-based simulation (SimVenture) on the start-up intention through the mediating roles of entrepreneurship educational outcomes; entrepreneurship cognition, entrepreneurship competencies, and innovation spirit of students in higher education institutions in the Middle East. The proposed conceptual framework was empirically tested with partial least squares structural equation modeling using 166 survey responses from fourth-year undergraduate students enrolled in business administration programs in four higher education institutions in the Middle East region. The findings reveal that ChatGPT significantly promotes start-up intention, while ChatGPT has insignificant influence on entrepreneurship educational outcomes. Conversely, the SimVenture platform negatively influences start-up intention. Additionally, the SimVenture platform significantly improves entrepreneurship educational outcomes; thereby entrepreneurship educational outcomes directly influence start-up intention. Furthermore, the mediation paths show ChatGPT has an insignificant indirect influence on start-up intention through the mediating roles of entrepreneurship educational outcomes, while the SimVenture platform exhibits a notable indirect influence on startup intentions through improved entrepreneurship educational outcomes. These findings seek to provide insights for higher education institutions in the Middle East region in leveraging GenAI chatbot (ChatGPT) and AI-based simulation (SimVenture) to enhance entrepreneurial knowledge, awareness, competencies, and the spirit of innovation, which leads to promoting students’ intentions to start their businesses. Theoretically, the study contributes to filling the gap in the existing literature between AI tools and entrepreneurship education. This study is among the first to empirically explore the influences of GenAI chatbot (ChatGPT) and AI-based simulation (SimVenture) on entrepreneurship educational outcomes and the intention of students to embark on entrepreneurial ventures. It highlights the need for understanding AI technologies as distinct pedagogical tools.

For public safety and physical security, currently more than a billion closed-circuit television (CCTV) cameras are deployed around the world. Proliferation of artificial intelligence (AI) and machine learning (ML) technologies has gained significant applications including crowd surveillance. The state-of-the-art distance and area estimation algorithms either need multiple cameras or a reference scale as a ground truth. It is an open question to obtain an estimation using a single camera without a scale reference. In this paper, we propose a novel solution called E-SEC, which estimates interpersonal distance between a pair of dynamic human objects, area occupied by a dynamic crowd, and density using a single edge camera. The E-SEC framework comprises edge CCTV cameras responsible for capture a crowd on video frames leveraging a customized YOLOv3 model for human detection. E-SEC contributes an interpersonal distance estimation algorithm vital for monitoring the social distancing of a crowd, and an area estimation algorithm for dynamically determining an area occupied by a crowd with changing size and position. A unified output module generates the crowd size, interpersonal distances, social distancing violations, area, and density per every frame. Experimental results validate the accuracy and efficiency of E-SEC with a range of different video datasets.

Critical distance concerns precise digital levelling, which has inaccurate results at a certain sighting distance. The influence of critical distance on a measured height difference has been confirmed by calibrating certain digital levels and their appropriate code devices on a vertical comparator under laboratory conditions. The paper describes the research based on experimental measurements done to find the influence of critical distance on height differences obtained by precise digital levels of Leica NA3003 and DNA03. The processing of the measurement results consisted of de-fining a random error on a station by using parameter estimation of an error model to specify a partial error on a station dependent on sighting distance and then the processing phase continues with the finding the relation between sighting distance and dispersion of height differences ac-quired by digital levelling under terrain conditions. The theoretical part involves the development of levelling accuracy theories that vary over time by view on random and systematic error propagation. The numerical and graphical solution of the experimental measurements involves ordering the height differences into sighting groups according to the sighting distances and the computed standard deviations, which represent a measure of height differences dispersion. The suspicious sighting groups are highlighted in the table and compared with theoretical data pro-vided by authors of calibrating the same digital levels

In this brief paper a quantum algorithm to calculate the Hamming distance of two binary strings of equal length (or messages in theory information) is presented. The algorithm calculates the Hamming weight of two binary strings in one query of an oracle. To calculate the hamming distance of these two strings we only have to calculate the Hamming weight of the xor operation of both strings. To test the algorithms the quantum computer prototype that IBM has given open access to on the cloud has been used to test the results.

Smallsats are becoming the predominant electro-optical Earth observation (EO) imaging platforms. While atmospheric correction of smallsat data enhances its utility, an established pathway to do so may constrain accuracy and utility. The alternative, Closed-form Method for Atmospheric Correction (CMAC), developed for smallsat application provides surface reflectance derived solely from scene statistics. In a prior paper, CMAC closely agreed with Land Surface Reflectance Code (LaSRC) software for correction of the four VNIR bands of Landsat-8/9 images for conditions of low to moderate atmospheric effect over quasi-invariant warehouse-industrial targets. Those results were accepted as surrogate surface reflectance to support analysis of CMAC and LaSRC reliability for surface reflectance retrieval in two contrasting environments: shortgrass prairie and barren desert. Reliability was defined and tested through a null hypothesis: the same top-of-atmosphere reflectance under the same atmospheric condition will provide the same estimate of surface reflectance. Evaluated against the prior surrogate surface reflectance, the results found decreasing error with increasing wavelength for both methods. From 58 comparisons across the four bands, LaSRC average absolute error ranged from 0.59% (NIR) to 50.30% (blue). CMAC error was well constrained from 0.01% (NIR) to 0.98% (blue) sustaining the null hypothesis for reliability.

Tropical cyclones (TC) are dangerous weather events and accurate monitoring and forecasting can provide significant early warning to reduce loss of life and property. However, the study of tropical cyclone intensity remains challenging, both in terms of theory and forecasting. ERA5 reanalysis is benchmark data set for tropical cyclone studies, yet the maximum wind speed error is very large (68 kts) and still 19 kts after simple linear correction even in the better sampled North Atlantic. Here, we develop an adaptive learning approach to correct the intensity in the ERA5 reanalysis, by optimising the inputs to overcome the problems because of the poor data quality and updating the features to improve the generalisability of the deep learning-based model. Specifically, we use TC knowledge to increase the representativeness of the inputs so that the general features can be learned with deep neural networks in the sample space, and then use domain adaptation to update the general features from the known domain with historical storms to the specific features for the unknown domain of new storms. This approach can reduce the error to only 6 kts which is within the uncertainty of the best track data in IBTrACS in the North Atlantic. The method may have wide applicability, such as extending it to the correction of intensity estimation from satellite imagery and intensity prediction from dynamical models.

Two-dimensional mass spectrometry (2D MS) is a method for tandem mass spectrometry that relies on manipulating ion motions to correlate precursor and fragment ion signals. 2D mass spectra are obtained by performing a Fourier transform in both the precursor ion mass-to-charge ratio (m/z) dimension and the fragment ion m/z dimension. The phase of the ion signals evolves linearly in the precursor m/z dimension and quadratically in the fragment m/z dimension. This study demonstrates that phase-corrected absorption mode 2D mass spectrometry improves signal-to-noise ratios by a factor of 2 and resolving power by a factor of 2 in each dimension compared to magnitude mode. Furthermore, phase correction leads to an easier differentiation between ion signals and artefacts, and therefore easier data interpretation.

Gesture-based recognition is one of the most intuitive methods for inputting information and is not subject to cumbersome operations. Recognition is performed on human's consecutive motion without reference to retrial or alternation by user. We propose a gesture recognition model with a mechanism for correcting recognition errors that operates interactively and is practical. We applied the model to a setting involving a manual grading task in order to verify its effectiveness. Our system, named GERMIC, consists of two major modules, namely, handwritten recognition and interactive correction. Recognition is materialized with image feature extraction and convolutional neural network. A mechanism for interactive correction is called on-demand by a user-based trigger. GERMIC monitors, track, and stores information on the user's grading task and generates output based on the recognition information collected. In contrast to conventional grading done manually, GERMIC significantly shortens the total time for completing the task by 24.7% and demonstrates the effectiveness of the model with interactive correction in two real world user environments.

Clinical rehabilitation and sports performance analysis both require the objectification of movement. Kinovea^© is a free 2D motion analysis software that enables the establishment of kinematics parameters. This low-cost technology has been used in sports sciences, as well as clinical field and research work. Although it has been validated as a tool with which to assess time-related variables, this is not yet the case regarding angular and distance variables. The main objective of this study was to determine the validity and reliability of the Kinovea software in obtaining angular and distance data at different perspectives of 90°, 75°, 60° and 45°. For this purpose, a figure with 29 points was designed (in AutoCAD) and 24 frames analysed. Each frame was examined by three observers who each made two attempts. For each export data item, 20 angles and 20 distance variables were calculated, with intra- and inter-observer reliability also analysed. To evaluate Kinovea reliability and validity a multiple approach was applied involving the following analysis: -systematic error with a two-way ANOVA 2x4; -relative reliability with ICC and CV (95% confidence interval); -absolute reliability with Standard Error. The results thus obtained indicate that the Kinovea software is a valid and reliable tool that is able to measure accurately at distances up to 5 m from the object and at an angle range of 90°–45°. Nevertheless, for optimum results an angle of 90° is suggested.

Currently, Pythagorean fuzzy sets (PFSs) have been widely applied in various fields due to their substantial advantages in expressing and dealing with uncertainty. However, measuring the similarity and difference between PFSs effectively remains an unresolved issue. Inspired by Tanimoto similarity, we propose a novel set of similarity and distance measures for PFSs. We delve into the theoretical properties of the proposed measures and compare it with existing PFSs measures. Numerous numerical examples validate their rationality and effectiveness. Furthermore, our experimental findings suggest that in contrast to existing measures, the introduced measures successfully circumvent various counter-intuitive issues encountered by current measures, and yield more pronounced outcomes in the discrimination of different fuzzy sets. This enhances the uniqueness and superiority of our measures. Finally, we developed two decision models based on the proposed measures and validated their applicability in three applications.

Faba bean (Vicia faba L.) is a partially outcrossing species requiring an isolation distance to maintain genetic purity when more than one variety is grown in field conditions. This information is crucial for seed growers and faba bean breeders. A study was conducted at the University of Sydney’s Plant Breeding Institute, Narrabri over two years to examine the extent of natural outcrossing using a creamy white flower characteristic as a morphological marker, which is controlled by a single recessive gene. The white flowered genotype (IX225c) was grown in paired rows of 150 m length in four directions from a central 480 m2 plot of the normal flowered genotype PBA Warda. A beehive was placed in the central plot at flowering time and natural pollination was allowed. At maturity, seed samples were taken from the white flowered genotype at designated intervals along each axis and 100 seeds from each sample were grown in the glasshouse/birdcage to the 4-5 leaf stage and the proportion of plants displaying stipule spot pigmentation (normal flower colour and spotted stipule are linked) was used to determine the percentage of outcrossing. Maximum outcrossing of 2.28% occurred where both genotypes were grown side by side (0 m) and the degree of outcrossing decreased as the distance along each axis from the central plot increased. At 6 m distance the outcrossing was less than 1%, however on occasion it increased to 1% beyond a distance of 100 m, indicating the volatile and unpredictable nature of bee flights. Distance had the major effect on outcrossing, but direction and its interaction had no effect. The results suggest that to limit outcrossing to below 0.5%, a distance of more than 150 m between plots of different faba beans cultivars would be required. It also indicated that Australian faba bean genotypes are mostly self-fertile and a relatively narrow isolation distance will ensure self-fertilization in seed production and breeding programs.

Allama Iqbal Open University (AIOU) is the largest distance learning institute of Pakistan and providing education to 1.4 million students. This is fairly a large setup across the country where students are geographically distributed. Currently the system works on a manual approach which is not efficient. Allocation of tutors and study centers to students plays a key role in distance learning for a better learning environment. Assigning tutors and study centers to distance learning students is a challenging task when there is huge geographical spread. The utilization of geospatial technologies in open and distance learning can fix allocation problems. This research analyzes the real data of twin cities Islamabad and Rawalpindi. The results show that the geospatial technologies can be used for efficient and proper resource utilization and allocation, which in turn can save the time and money. The overall idea fits into improved distance learning framework and related analytics.

Academic publishing is undergoing a highly transformative process, and many rules and value systems that were in place for years are being challenged in unprecedented forms leading to the evolution of novel ways of dealing with new pressures. One of the most important aspects of an integrated and valid academic literature is the ability to screen publications for errors during peer review to weed out mistakes, fraud and inconsistencies, such that the final published product represents a product that has value, intellectually, and otherwise. It is difficult to claim the existence of perfect manuscripts. The level of errors that exist in a manuscript will depend on the rigor of the research group and of the peer review process that was used to screen that paper. When errors slip into a final published paper, either through honest error or misconduct, and are not detected during peer review and editorial screening, but are spotted during post-publication peer review, an opportunity is created to set the record straight, and to correct it. To date, the most common forms of correcting the literature have been errata, corrigenda, expressions of concern, and retractions. Despite this range of corrective measures, which represent artificially created corrals around pockets of imperfect literature, certain cases do not quite fit this mold, and new suggested measures for correcting the literature have been proposed, including manuscript versioning, amendments, partial retractions and retract and replace. In this commentary, a discussion of the evolving correction of the literature is provided, as are perspectives of the risks and benefits of such new measures to improve it.

Long-term, high-accuracy mapping of built-up land dynamics is essential for understanding urbanization and its consequences for the environment. Despite advances in remote sensing and classification algorithms, built-up land mapping using early satellite imagery (e.g., from the 2000s and earlier) remains prone to uncertainty. We mapped the extent of built-up land in the North China Plain, one of China’s most important agricultural regions, from 1990 to 2019 at three-year intervals. Using dense time-stack Landsat data, we applied discrete Fourier transformation to create temporal predictors and reduce mapping uncertainties for early years. We improved overall accuracy by 8% compared to using spectral and indices predictors alone. We implemented a temporal correction algorithm to remove inconsistent pixel classifications, further improving accuracy to a consistently high level (>94%) across years. A cross-product comparison showed that our study achieved the highest levels of accuracy across years. Total built-up land in the North China Plain increased from 37,941 km² in 1990–1992 to 131,578 km² in 2017–2019. Consistent, high-accuracy built-up land mapping provides a reliable basis for policy planning in one of the most rapidly urbanizing regions of the planet.

Long-distance Real-Time Kinematic (RTK) positioning is crucial for applications in remote areas, such as maritime environments. Achieving 2-3 cm accuracy with RTK requires successful ambiguity resolution, which involves two main two steps: identifying the best integer ambiguity candidate and confirming its validity. While previous research has largely concentrated on the first step, including the development of Cascading Ambiguity Resolution methods, and reducing tropospheric delay, studies on the validation of ambiguity for long-distance RTK are limited. This study conducts a thorough examination of ambiguity validation for long-distance RTK, focusing on two prevalent methods: the theoretical success rate and the R-ratio test. The results reveal several key insights. Firstly, the six commonly used bounds for the theoretical success rate are not accurate reflection of the actual success rate, making them unsuitable for long-distance RTK applications. Secondly, the R-ratio test proves to be dependable when the threshold is set above 1.7, assuming there is a minimum observation period of one minute and at least ten satellites are visible. However, the probability of successfully resolving ambiguities with the R-ratio test does not surpass 50%. Additionally, if ambiguity resolution is not achieved within 20 minutes, simply prolonging the observation time is generally unproductive. To improve the performance of ambiguity resolution in practical situations that require extended observation times, this research proposes a novel ambiguity validation method. This new approach is based the duration for which an integer ambiguity resolution candidate maintaining the best status. This method aims to provide a reliable means of validating ambiguities in case that the R-ratio test fails.

Accurately predicting the distance an object will travel to its destination is very important in various sports. Acceleration sensors as a means of real-time monitoring are increasingly gaining increasing attention in sports. Due to the low energy output and power density of Triboelectric Nanogenerators (TENGs), recent efforts have focused on developing various acceleration sensors. However, these sensors suffer from significant drawbacks of large size, complexity, high power input requirements, and high cost. Here, we described a portable and cost-effective real-time refreshable strategy design comprising a series of individually addressable and controllable units based on TENGs embedded in a flexible substrate. This results in a highly sensitive, low-cost, and self-powered acceleration sensor. Putting, which accounts for nearly half of the strokes played, is obviously an important component of the golf game. The developed acceleration sensor has an accuracy controlled within 5 %. The initial velocity and acceleration of the forward movement of a rolling golf ball after it is hit by a putter can be displayed, and the stopping distance quickly calculated and predicted in about 7 seconds. This research demonstrates the application of the portable TENG-based acceleration sensor, while paving the way for designing portable, cost-effective, scalable, and harmless ubiquitous self-powered acceleration sensors.

In this work, the conceptions of the electrodynamics of action-at-a-distance and of electromagnetic fields are reviewed and confronted, with the aim of clarifying whether it is possible to propose a Weberian theory of action-at-a-distance, which together with a renewed mechanics (both re-specting the existence of a limiting velocity c) could constitute a framework capable of yielding predictions equivalent to those of the conventional Maxwell-Lorentz and SRT framework. In this work, it is shown that, considering basic assumptions about the interaction process, understanding it as an action exchange process, it is possible to derive the expression of the electrodynamic Phipps’ potential energy between two interacting charges. It is also shown that, with the same assumptions and the additional hypothesis that the interaction is supported by a mediating agent (aether or field) which is perturbed by the transmission of action, this perturbation obeys the wave equation (one of the main drawbacks of Weberian electrodynamics). Another aim of the work is to confront the relational electrodynamic formulations (supported by Galilean transformations that assume a universal time) with the Maxwell-Lorentz formulation of electromagnetism (linked to Lorentz transformations that entail local times), in order to elucidate whether the space-time to which the SRT leads us is a mere mathematical artifice or an inescapable reality.

Vegetation identification using remote sensing is essential for understanding terrestrial ecosystems and monitoring climate change. This technology by providing high-resolution images of the Earth's surface from satellites, aircraft, and drones has revolutionized the way scientists study and un-derstand vegetation patterns, providing information on the distribution, structure, and health of plant communities in different regions and biomes. However, identifying vegetation in multi and hyperspectral images remains a difficult, time-consuming, and costly process. Traditional methods for vegetation mapping involve the in-terpretation of spectral indices such as the Normalized Difference Vegetation Index (NDVI), alt-hough they often suffer from limitations such as manual interpretation and limited spatial resolution of satellite images. Furthermore, machine learning techniques, artificial neural networks, decision trees, support vector machines, and random forests have shown promising results in identifying and classifying vegetation cover from hyperspectral images. However, due to the need for per-son-nel with specialized expertise, their application on a large scale is still challenging. On the other hand, correlation methods between curves have emerged as powerful and simplified tool for comparing spectral signatures of hyperspectral image pixels and efficiently classifying vegetation in a study area. Pearson's correlation coefficient and spectral angle mapper are among the most common correlation methods used in vegetation mapping. These correlation methods, among many others available, offer an easily implemented and computationally efficient approach, making them particularly useful for applications in developing countries or regions with limited resources. In this article, a comparative study of correlation/distance metrics was conducted for the detection of vegetation pixels in hyperspectral images. The study allowed for the comparison of five distance and/or correlation metrics: direct correlation, cosine similarity, normalized Euclidean distance, Bray-Curtis’s distance, and Pearson correlation. The two metrics that yielded the best accuracy results in vegetation pixel detection were direct correlation and Pearson correlation. Based on the selected methods, a vegetation detection algorithm was implemented and validated on a hyper-spectral image of the Manga neighborhood in Cartagena de Indias, Colombia. The spectral library was utilized for image processing, while the numpy and scipy libraries in the Python programming language were used for the mathematical calculation of correlations. Both the study's approach and the implemented algorithm aim to serve as a reference for conducting detection studies of various material types in hyperspectral images using open-access programming platforms.

Here we use the flat Friedmann-Lemaitre-Robertson-Walker metric describing a spatially homogeneous and isotropic universe to derive the cosmological redshift distance in a way which differs from that which can be found in the astrophysical literature. We use the co-moving coordinate r_e (the subscript e indicates emission) for the place of a galaxy which is emitting photons and r_a (the subscript a indicates absorption) for the place of an observer within a different galaxy on which the photons - which were traveling thru the universe - are absorbed. Therefore the real physical distance - the way of light - is calculated by D = a(t₀) r_a - a(t_e) r_e. Here means a(t₀) the today’s (t₀) scale parameter and a(t_e) the scale parameter at the time of emission (t_e) of the photons. Nobody can doubt this real travel way of light: The photons are emitted on the co-moving coordinate place r_e and are than traveling to the co-moving coordinate place r_a. During this traveling the time is moving from t_e to t₀ (t_e ≤ t₀) and therefore the scale parameter is changing in the meantime from a(t_e) to a(t₀). Using this right way of light we calculate some relevant classical cosmological equations (effects) and compare these theoretical results with some measurements of astrophysics. As one result we get e.g. the today’s Hubble parameter H_0a ≈ 62.34 km/(s Mpc). This value is smaller than the Hubble parameter H_0,Planck ≈ 67.66 km/(s Mpc) resulting from Planck 2018 data [12] which is discussed in the literature.

The k-means is one of the most popular and widely used clustering algorithm, however, it is limited to only numeric data. The k-prototypes algorithm is one of the famous algorithms for dealing with both numeric and categorical data. However, there have been no studies to accelerate k-prototypes algorithm. In this paper, we propose a new fast k-prototypes algorithm that gives the same answer as original k-prototypes. The proposed algorithm avoids distance computations using partial distance computation. Our k-prototypes algorithm finds minimum distance without distance computations of all attributes between an object and a cluster center, which allows it to reduce time complexity. A partial distance computation uses a fact that a value of the maximum difference between two categorical attributes is 1 during distance computations. If data objects have m categorical attributes, maximum difference of categorical attributes between an object and a cluster center is m. Our algorithm first computes distance with only numeric attributes. If a difference of the minimum distance and the second smallest with numeric attributes is higher than m, we can find minimum distance between an object and a cluster center without distance computations of categorical attributes. The experimental shows proposed k-prototypes algorithm improves computational performance than original k-prototypes algorithm in our dataset.

The development of anti-pain technologies in the complex treatment of pain syndromes is one of the most urgent tasks of modern medicine. We have undertaken a placebo-controlled experimental study of the therapeutic potential of low-intensity laser radiation when applied to acupuncture points, which are directly related to the autonomic nervous system. The adaptation effect of puncture photobiomodulation on the induction of stress-mediated autonomic reactions, oxidative metabolism and microcirculation in animals during the acute phase of pain stress was revealed. The data obtained are of interest for use in the complex rehabilitation of patients with pain syndrome.

An easier method for the calibration of differential drive robots is presented. Most of the calibration is done on-board and it is not necessary to expend too much time taking note of the robot's position. The calibration method does not need a big free space to perform the tests. The bigger space is just in a straight line, which is easy to find. Results with the proposed method are compared with those from UMB as a reference, and they show very little deviation while the proposed calibration is much simpler.

Advances in remote sensing have led to use of satellite-derived rainfall products to complement the sparse rain gauge data. Although globally derived and some regional bias corrected, these products often show large discrepancies with ground measurements attributed to local and external factors that require systematic consideration. Decreasing rain gauge network however inhibits continuous validation of these products. We propose to deal with this problem by the use of Bayesian approach to merge the existing historical rain gauge information to create a consistent satellite rainfall data that can be used for climate studies. Monthly Bayesian bias correction is applied to the Climate Hazards Group Infrared Precipitation with Stations (CHIRPS v2) data to reduce systematic errors using a corresponding gridded (0.05°) rain gauge data over East Africa for a period of 33 (1981–2013) years of which 22 years are utilized to derive error fields which are then applied to an independent CHIRPS data for 11 years for validation. The bias correction is spatially and temporally assessed during the rainfall wet months of March-May (MAM), June-August (JJA) and October–December (OND) in East Africa. Results show significant reduction of systematic errors at both monthly and yearly scales and harmonization of their cumulative distributions. Monthly statistics showed a reduction of RMSD (29–56)% and MAE (28–60)% and an increase of correlations (2–32) %, while yearly ones showed reductions of RMSD (9-23)%, and MAE (7–27)% and increase of correlations (4–77)% for MAM months, reduction of RMSD (15–35)% and MAE (16–41)% and increase in correlations (5–16)% for JJA months, and reduction of RMSD (3–35)% and MAE (9–32)% and increase of correlations (3–65)% for OND months. Systematic errors of corrected data were influenced by local processes especially over Lake Victoria and high elevated areas. Large-scale circulations induced errors were mainly during JJA and OND rainfall seasons and were reduced by the separation of anomalous years during training. The proposed approach is recommended for generating long-term data for climate studies where consistencies of errors can be assumed.

This paper addresses the study of synoptic-scale meteorological conditions that favor long-range pollen transport in southern South America combining airborne pollen counts, modeled three-dimensional backward trajectories, and synoptic and surface meteorological data. Alnus pollen transport trajectories indicate origins predominantly in Montane forests of the Yungas between 1500 and 2800 m altitude. The South American Low-Level Jet is the main meteorological feature that explains 64\% of the detected pollen arrival at the target site. Podocarpus and Nothofagus pollen instead are linked primarily to the widespread Subantartic forests in southern Patagonia. Their transport patterns are consistent with previous studies which show an association with synoptic patterns related to cold front passages carrying pollen in the free atmosphere (27% for Nothofagus and 25% for Podocarpus). These results show the significance of understanding long-distance pollen transport for disciplines such as climate change reconstruction and agriculture, emphasizing the need for further research to refine atmospheric circulation models and refine interpretations of past vegetation and climate dynamics.

Stingless bee beekeeping provides new opportunities to improve the incomes of many households in Malaysia through the sale of honey and other bee products. While Heterotrigona itama is one of the most commonly cultured species of stingless bees, its behavior is not very well understood. Hence, we conducted this study to investigate the behavior of H. itama in exploiting food sources by ascertaining the nectar sugar concentration preferred by the bee. We also aimed to determine the preferred distance of food source from the bee hive. Our results suggest that H. itama prefers high sugar concentrations of 35% and above, and they would fly up to 7 m from the hive to collect food. We discuss how nectar concentration and food distance influence the number of bees exploiting food sources and the overall foraging pattern of H. itama.

Background: Infantile tibia vara (ITV) is a rare proximal tibia deformity in infancy, leading to progressive knee varus. High tibial osteotomy is commonly practiced but has high recurrence rates. This study analyzed factors affecting treatment failure and recurrence in children undergoing opening-wedge high tibial osteotomy (OWHTO) for ITV. Methods: We retrospectively studied children with ITV who had OWHTO with press-fit cancellous bone allograft between 2000 and 2020, with ≥2-year follow-up. Outcomes included recurrence (knee varus with tibiofemoral angle >10°), complications, and reintervention. Results: We analyzed 39 knees in 29 patients (mean age: 4.8 ± 1.9 years; median follow-up: 7.4 years). Recurrence occurred in 22 cases (56%). Age at surgery significantly influenced recurrence, with rates of 16% before age 5 versus 95% later (hazard ratio: 12.0, p = 0.001). Langenskiöld stage also affected recurrence (β-coefficient: 2.7, 95% C.I. 1.0–4.5, p = 0.002; pseudo-R-squared: 0.50, p = 0.001), with recurrence in all stage III IV or higher cases. Conclusions: Early diagnosis and treatment before age 45, ideally with Langenskiöld stage III or lower, are crucial for stable correction with OWHTO alone. Late, high-grade ITV may require combined, acute or gradual, and/or staged correction. Further evidence is needed for optimal management.

This research reviews a novel artificial intelligence (AI) based application called ‘TLDetect’, which filters and classifies anomalous glow curves (GCs) of thermoluminescent dosimeters (TLDs). Until recently, GCs review and correction in the lab were performed using an old in-house software, which uses Microsoft Access database and allows the laboratory technician to manually review and correct almost all GCs without any filtering. The newly developed application ‘TLDetect’ uses a modern SQL database and filters out only the necessary GCs for technician review. TLDetect first uses an Artificial Neural Network (ANN) model to filter out all regular GCs. Afterwards, it automatically classifies the rest of the GCs into five different anomaly classes. These five classes are defined by GCs typical patterns, i.e. high noise at either low or high temperature channels, untypical GC width (either wide or narrow), shifted GCs whether to the low or to the high temperatures, spikes, and the last class contains all other unclassified anomalies. By this automatic filtering and classification, the algorithm substantially reduces the amount of technician’s time of reviewing the GCs and makes the external dosimetry laboratory dose assessment process more repeatable, accurate and fast. Moreover, a database of GCs class anomalies distribution over time is saved along with all their relevant statistics, which can later assist with preliminary diagnosis of TLD reader hardware issues.

Distance learning has assumed a relevant role in the Educational scenario. The use of Virtual Learning Environments contributes to obtain a substantial amount of educational data. In this sense, the analyzed data generate knowledge used by institutions to assist managers and professors in strategic planning and teaching. The discovery of students’ behaviors enables a wide variety of intelligent services for assisting in the learning process. This article presents a literature review in order to identify the intelligent services applied in distance learning. The research covers the period from January 2010 to May 2021. The initial search found 1,316 articles, among which 51 were selected for further studies. Considering the selected articles, 33% (17/51) focus on learning systems, 35% (18/51) propose recommendation systems, 26% (13/51) approach predictive systems or models, and 6% (3/51) use assessment tools. This review allowed to observe that the principal services offered are recommendation systems and learning systems. In these services, the analysis of student profiles stands out to identify patterns of behavior, detect low performance and identify probabilities of dropouts from courses.

Effects of the convection flow, atmospheric diffusivity and humidity on evolution and travel distances of exhaled aerosol clouds by an infected person are considered. The aim of this work is to evaluate the importance of aerosol transmission routes and the effectiveness of the 2-metre separation distance policy. A potential impact of use of face masks on the infection transmission rate, and an opportunity to reduce infection in hospitals, care homes and other public spaces by appropriate monitoring and filtering of air are also considered. The results obtained demonstrate that aerosol particles generated by coughing and sneezing can travel over 30 m. Modelling of the evolution of aerosol clouds generated by coughing and sneezing enables us to evaluate the deposition dose of aerosol particles in healthy individuals. For example, a person in a public place (e.g. supermarket or car park) can accumulate in the respiratory system up to 200 virus copies in 2 min time by breathing in virus laden aerosols. Wearing face mask considerably reduces the deposited load down to 2 virus copies per 2 min. The modelling also suggests that it should be possible to measure virus causing COVID-19 (SARS-CoV-2) within aerosol particles in hospitals and public places, e.g. care homes and supermarkets.

Is immediate action at a distance, like gravitational attraction, imaginable using the contrary concept of close up, tactile, events? Tactile events, defined with the term ‘tap-tapping’ as a blind man does, described in a two-way spiritual interaction theory, are implemented in physics to understand gravitation from this respect. The quantum mechanical wave function reduction during measurements receives a new approach. Formulated is a new proof for Einstein’s Equivalence Principle, extending it beyond locality, and a sketch of how tactile interaction could explain dark energy and an accelerated expansion of the universe. Dark energy and dark matter are examples starting from which to discuss properties of matter and space and gravitation as immediate tactile action rather than mediated action such as electromagnetism.

The rapid development of information and communication technologies has led to the use of new and digital technologies in education which involves combinations of text, graphics, audio, video, animations and other eLearning resources such as authoring tools, Learning Management System (LMS), Mobile learning and others. Arguably, using LMS leaves much to be desired. The inherent problem here is that the future of extensive adoption of ICT via LMS to enhance and promote classroom interaction in Open and Distance Learning (ODL) is bleak. This is worrisome given that the country is lagging far behind in the innovative use of this web 2.0 technology to impart knowledge. Further, the low-level application of LMS in instruction connotes the loss of inherent advantages in its adoption. Also, the online setting which makes students less nervous and interactive, sharing of ideas and viewpoints; and a host of other benefit will be lost. While evidence has shown that LMS is not a new phenomenon, the use of LMS in ODL is still at its infancy, particularly in Nigeria. Research in this area is rare. A quick search on prominent research databases could testify that. It is on this thrust that this study investigates University of Ibadan undergraduate students’ perceived roles and readiness towards integration of learning management system into teaching and learning.

Atmospheric propagational phase variations are the dominant source of error for InSAR timeseries analysis, generally exceeding uncertainties from poor SNR or signal correlation. The spatial properties of these errors have been well studied, but their temporal dependence and correction have received much less attention to date. We present here an evaluation of the magnitude of tropospheric artifacts in derived time series after compensation using an algorithm that requires only the InSAR data themselves. The level of artifact reduction equals or exceeds that from many weather model based methods, while avoiding the need to access fine-scale atmosphere parameters globally at all times. Our method consists of identifying all points in an InSAR stack with consistently high correlation, and computing, then removing, a fit of the phase at each of these points with respect to elevation. Comparison with GPS truth yields a reduction of 3, from an rms misfit of 5-6 cm to ~2 cm over time. This algorithm can be readily incorporated into InSAR processing flows without need for outside information.

Since the discovery of the first reported case with Zinc-deficiency in Iran¹ by Prasad et al. in 1961, the knowledge on Zinc has increased significantly. Zinc is the second most abundant common trace mineral in the human body, responsible for vital biological functions from cell growth and development to cell homeostasis and immune response ^2,3. Up to a fifth of the global population is estimated to suffer from different degrees of Zinc deficiency⁴. In the western world, Zinc deficiency is more prevalent among the geriatric population³, vegans/vegetarians, and people with certain underlying conditions⁴such as liver cirrhosis, inflammatory bowel disease, and various auto-immune disorders^4,5. Zinc and Zinc deficiency has been associated with several infectious diseases ^2,3. Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) which is responsible for the ongoing pandemic belongs to the family of coronaviruses. SARS-CoV-2 has a high genetic similarity to another family member, SARS-CoV, which caused the first major epidemic of the 21^st century^6,7. Currently, there is no evidence linking the anti- SARS-CoV-2 response and the element Zinc. Herein and in light of the SARS-CoV-2 pandemic, we marshal the evidence associating the element Zinc with the anti-viral and antibacterial immune response as well as the cytokine storm and lung injury. Such a revisit of the precedent evidence may inspire further investigation assessing the relationship between Zincemia status and the anti-viral response in SARS-CoV-2 patients.

Document deskewing is a fundamental problem in document image processing. While existing methods have limitations, such as Hough Line Transformation that can deskew images upside down, and Deep Learning models that require huge amounts of human labour and computational resources and still fail to deskew while taking care of orientation, OCR-based methods also struggle to read text when it is tilted. In this paper, we propose a novel, simple, cost-effective deep learning method for fixing the skew and orientation of documents. Our approach reduces the search space for the machine learning model to predict whether an image is upside down or not, avoiding the huge search space of predicting an angle between 0 and 360. We finetuned a MobileNetV2 model, which was pre-trained on imagenet, using only 200 images and achieve good results. This method is useful for automation-based tasks, such as data extraction using OCR technology, and can greatly reduce manual labour.

This study delves into hospital mobility, understood as an indicator of perceived service quality, across the Italian regions of Apulia and Emilia Romagna, utilizing logistic regression among machine learning techniques. The focus is on how structural, operational, and clinical variables impact patient perceptions of service quality, influencing their healthcare choices. Through the analysis of mobility trends with machine learning, significant differences between regions were uncovered, highlighting the influence of regional context on perceived quality. The integration of SHAP (SHapley Additive exPlanations) values into our analysis provided deeper insights into the logistic regression model, elucidating the specific contribution of each variable to perceived healthcare quality. This incorporation of SHAP values underscores the study's commitment to employing advanced, explainable AI techniques to enhance the interpretability and fairness of healthcare service evaluations. The choice of logistic regression elucidated the impact of specific variables on quality perception, offering essential insights for optimizing healthcare resource distribution and underscoring the importance of data-driven strategies to foster more equitable, efficient, and patient-centred healthcare systems. Contributing to the understanding of perceived quality dynamics within the healthcare context, the research paves the way for further investigations into enhancing accessibility and service quality, leveraging machine learning as a tool for improving healthcare services efficiency in diverse regional settings.

This study investigates the magnetization of Cobalt (Co) nanoparticles with two different crystal structures: a centered cubic (fcc) and an hexagonal close packed (hcp), under the magnetic field of the Earth. For that reason, the hysteresis loops of the two material samples are exported and compared with the corresponding value by experimental procedure in the laboratory under the Earth’s magnetization. For both samples, the nanoparticle number variation and the nearest neighbor distance effect, in the Co hysteresis loop are investigated, structural information that is useful for the sample preparation. For the simulations the Finite Element Method (FEM) was used, while experiments are conducted using a measurement set-up based on fluxgate magnetometers. From the simulation, it is proven that, for both samples, the nanoparticle number effect does not change the hysteresis loop. In contrast, when the distance between the nanoparticles increases, the magnetization obtains smaller value. This study aims to build a novel, simple and economical measurement arrangement enabling in situ magnetic measurements for ferromagnetic nano-material characterization. As the need for continuous knowledge of the condition and the phase of ferromagnetic nanoparticles that is crucial in many applications, like catalytic processes, this work aims to introduce an alternative approach that will add another dimension to conventional chemical reaction engineering this of the magnetic state of the material resolved in time and space and to contribute in the field of the monitoring and the early fault diagnosis of nanoparticle materials.

This paper aims to investigate the rate of expansion and extraction within the solar system. We carried out the Solar system expansion calculations to do such a review. The Universe is expected to look the same from every point in it. After the big bang, Universe is expanding at some speed. Astrophysicists have been in a race to measure precisely how fast the Universe is expanding since Hubble announced that galaxies were systematically moving away from Milky Way Galaxy with a current speed in 1929. Hubble’s observations came after Einstein’s general relativity, which inspired the big bang theory. According to the Big Bang theory, the Universe has created billions of years ago with an explosion and started to expand until today. The expansion of the Universe mostly happens in vast spaces, so clusters of galaxies move away from each other. For example, raising bread during baking will expand, but the raisings will stay the same size while moving each other to expand the bread. Observers have proven that an object (galaxies, a cluster of planets) held together by gravity has a patch of nonexpanding space produced by a gravitational field. However, some observers claimed the solar system is not expanding, while others claimed it is expanding. Does our solar system expand in an expanding Universe? The cosmological expansion of local systems is reviewed in the modern cosmological models. We showed answers related to this question with the help of literature. This review article revisited the proof of the Solar System’s expansion and its speed with about 0.32 nm/s in an expanding Universe.

Lift-offs of the sensor could significantly affect the measurement signal and reconstruction of material properties when using the electromagnetic (inductive) eddy current sensor. Previously, various methods (including novel sensor designs, and features like zero-crossing frequency, lift-off point of intercept) have been used for eliminating the measurement error caused by the lift-off distance effect of the sensor. However, these approaches can only be applied for a small range of lift-off variations. In this paper, a linear relationship has been found between the sensor lift-off and ratio of dual-frequency eddy current signals, particularly under the high working dual frequencies. Based on this linear relationship, the lift-off variation can be reconstructed firstly with a small error of 2.5 % when its actual value is up to 10 mm (10.1 % for 20 mm). The reconstructed lift-off is used to further get the property of the material under a low single frequency. Experiments on different ferrous metals have been carried out for the testing of the reconstruction scheme. Since the inductance is more sensitive to the material property (and less sensitive to the lift-off) under low frequencies, the reconstruction error of the material property is much smaller than that of the lift-off, with 1.4 % under 12 mm (and 4.5 % under 20 mm).

Meteorological observations over the last four decades are of paramount importance to investigate the ongoing climate change. The assessment of the reliability of any climatic time series is thus mandatory to draw correct conclusions. This evaluation involves homogeneity tests to detect artificial discontinuities whose identification is facilitated by metadata availability. In this work, daily minimum and maximum temperature measurements collected in Padua, Italy, between 1980 and 2022, are examined. Hourly observations began in 1993 and since the aim is to study long term behavior of the temperature, the focus is on daily averages and extremes. Over this period, the weather station of Padua center underwent many changes, in location or instrument; therefore, some tests have been used to identify and remove the effects of these variations and obtain a homogeneous time series. The homogeneity tests applied must be able to identify change-points both in the middle and at the extremes of the series. Some well-known absolute tests have been applied to investigate shift in the mean value: Standard Normal Homogeneity test (SNH), Buishand U and range tests, Pettitt test, F-test, STARS. Some relative tests have been applied too, which are generally more reliable than absolute tests, because they consider the information from neighboring stations. As relative tests rely on the homogeneity and quality of the reference series, several nearby stations and two reanalysis datasets (ERA5 and MERIDA) have been considered, to enhance the picture of the local situation and provide more robust conclusions. The applied tests identify change-points in the years in which a change in instrument or location of the station have occurred, confirming that these changes have compromised the homogeneity of the series. The sub-series obtained splitting the observations in correspondence of these change-points have been homogenized with respect a selected period; corrections must be applied also to future measurements to extend the time series properly.

Fiber coupling efficiency is one of the key technical indicators of atmospheric laser communication, which directly affects the communication system BER. According to the optical fiber coupling efficiency model, the optical fiber coupling model under atmospheric slant link is established, and the relationship between wavelength, zenith angle, receiving aperture, altitude and coupling efficiency is studied through numerical simulation. Based on the principle of adaptive optics turbulence correction, the relationship between fiber coupling efficiency and adaptive optics order is established. A fast method for estimating the coupling efficiency based on Strehl ratio is proposed. According to the principle of laser communication system, the semi-physical simulation experimental system of atmospheric slant-range channel coupling efficiency is constructed, and the coupling efficiency test and analysis are completed.

The CRISPR/Cas9 gene editing system has enormous potential in the treatment of multiple genetic disorders. To fully harness this potential, it is essential to deliver CRISPR-Cas9 components safely and effectively into the nuclei of target cells. In this study, we tested the amphipathic cell-penetrating peptide LAH5, previously used for DNA delivery, to intracellularly deliver spCas9: sgRNA ribonucleoprotein (RNP) and RNP/single-stranded homology-directed repair (HDR) template. We discovered that the LAH5 peptide effectively formed nanocomplexes with both RNP and RNP/HDR cargo, and that these nanocomplexes were taken up by cells effectively. Peptide/RNP nanocomplexes were characterized for size and charge, and nanocomplexation with RNP and RNP/HDR cargo was demonstrated via an electrophoretic mobility shift assay. Various ratios of peptide/RNP nanocomplexes were functionally screened on fluorescent reporter cell lines for gene editing and HDR-mediated gene correction. Additionally, targeted gene editing of the CCR5 gene was demonstrated in various cell lines. This LAH5-based delivery strategy paves the way for the development of therapeutic delivery systems for CRISPR/Cas-based genomic engineering.

Sickle cell disease is characterized by stiff, “sickled” red blood cells that have difficulty moving through the bloodstream and do not efficiently carry oxygen. It is an inherited disease with severely limited treatment options, and is caused by a point mutation. Its prevalence in black and brown communities makes the already limited treatment options even less accessible. Base editing and prime editing are two relatively recent discoveries in the field of genome editing and were developed after the groundbreaking discovery of the CRISPR Cas9 system. While not fully tested, they hold a lot of promise in providing alternative treatment options for sickle cell disease. Both editing systems are able to install individual point mutations in the beta globin gene, which is where the sickle cell mutation occurs, and can thus cure sickle cell disease (in theory). In this paper we outline the mechanisms of CRISPR-Cas9 systems and base and prime editing, and provide insight into how to apply them to treat SCD. Further investigation should be done on specific editing systems and designs to use to ensure optimal treatment of SCD.

The purpose of this study is to propose a consecutive manufacturing process system to secure the productivity of excellent STKN540B steel tube in the respect of economy and safety as the supporting material for mega structures such as building, bridge and ship. The components of consecutive manufacturing are press-bending, orbital auto welding and steel tube correction. By using STKN540B a high-strength steel material with low yield point that requires a special manufacturing process unlike other steel materials, an actual tube manufacturing is carried out at each stage in this experimental study. With this, the quality of steel tube and the efficiency of the manufacturing process are analyzed to draw out some points to improve in the future.

As the aging of the world accelerates, clarifying the relationship between cultural differences and ageism is an urgent issue. Therefore, in this study, we conducted a correlation analysis between the six cultural scales of Hofstede et al. [1] and the objective and subjective ageism scales calculated from data on 35,232 people from 31 countries included in the World Values Survey Wave 6 by Inglehart et al. [2]. The results of a partial correlation analysis controlling for economic and demographic factors showed that power distance (PDI) and indulgence versus restraint (IVR) are positively and negatively correlated with ageism, respectively. This is the first study to show that these two cultural scales that previous studies have not paid much attention to are related to ageism.

Tests of selection based on population differentiation were performed on two highly polygenic traits important for success and quality of life: body height and educational attainment (EA). Polygenic scores (PGS) of EA and height, computed across three public genomic databases revealed differences between populations (1000 Genomes, HGDP, gnomAD) that matched the average IQ and height of ethnic groups (r ~0.9). A moderately strong correlation between latitude and EA PGS (r= 0.67) implies the effect of climate (seasonality or winter temperature) on selection for cognitive ability. The effect of latitude was reduced (β= 0.28) but remained significant after adding the sub-continental group variable to the regression model.The global Fst index revealed population differentiation at height and EA loci, significantly deviating from random SNPs. Substantial Linkage Equilibrium (LD) Decay between YRI and CEU was found (r= 0.6) but there was no correlation between LD decay and population differences in polygenic scores for EA (r= 0.015, p= 0.45), and slight inflation of height PGS difference due to LD decay (r= -0.04, p= 0.0315). Selecting the SNPs most robust to LD decay (r>0.8) resulted in larger PGS gaps for EA, but smaller for height. Finally, it is shown that PGS differences are more sensitive to the significance of GWAS loci than Fst, reflecting the major limitations of Fst as an index of selection.

Distance Learning has become the new standard, especially after the pandemic and due to the technological advances, that are incorporated into the teaching procedure. At the same time, the augmented use of the internet has blurred the borders between distance and conventional learning. Students interact mainly through LMSs, leaving their digital traces that can be leveraged to improve the educational process. This work aims to propose a model that can capture the students' behaviors based on the clickstream data associated with the discussion forum and additionally to suggest interpretable patterns that will support education administrators and tutors in the decision-making process. To achieve our goal, we use Social Network Analysis (SNA) as networks represent complex interactions in a meaningful and easily interpretable way. Moreover, simple or complex network metrics are becoming available to provide valuable insights into the students’ social interaction. This study concludes that by leveraging the imprint of these actions in an LMS and using metrics of SNA, differences can be spotted in the communicational patterns that go beyond simple participation recording. Although HITS and PageRank algorithms were created with completely different targeting, it is shown that they can also reveal methodological features in students’ communicational approach.

Mahalanobis distance is a useful multivariate statistic for determining how far apart two points are from one another. It is a very helpful statistic with excellent uses in multivariate anomaly detection, one-class classification, and classification on severely unbalanced datasets.

Most natural language processing (NLP) tasks operate an input sentence as a sequence with token-level embeddings and features, despite its clausal structures. Taking Abstract Meaning Representation (AMR) parsing as an example, recent parsers are empowered by Transformers and pre-trained language models, but long-distance dependencies (LDDs) introduced by long sequences are still open problems. We argue that LDDs are not superficially blamed on the sequence length but are essentially related to the internal clause hierarchy. Typically, non-verb words in a clause cannot depend on words outside, and verbs from different but related clauses have much longer dependencies than those in the same clause. With this intuition, we introduce a type of clausal feature, hierarchical clause annotation (HCA), into AMR parsing and propose two HCA-based approaches, HCA-based self-attention (HCA-SA) and HCA-based curriculum learning (HCA-CL), to integrate HCA trees of complex sentences for addressing LDDs. We conduct extensive experiments on two in-distribution (ID) AMR datasets (AMR 2.0 and AMR 3.0) and three out-of-distribution (OOD) ones (TLP, New3, and Bio). Experimental results show that our HCA-based approaches achieve significant and explainable improvements against the baseline model and outperform the state-of-the-art (SOTA) model when encountering sentences with complex clausal structures that introduce most LDD cases.

In this paper, we introduce deboost, a Python library devoted to weighted distance ensembling of predictions for regression and classification tasks. Its backbone resides on the scikit-learn library for default models and data preprocessing functions. It offers flexible choices of models for the ensemble as long as they contain the predict method, like the models available from scikit-learn. deboost is released under the MIT open-source license and can be downloaded from the Python Package Index (PyPI) at https://pypi.org/project/deboost. The source scripts are also available on a GitHub repository at https://github.com/weihao94/DEBoost.

Satellite measurements are one of the main sources of data on the state of the marine environment. To obtain information about the sea brightness coefficient , it is needed to correctly carry out atmospheric correction. In the presence of dust aerosol over the Black Sea, physically incorrect values of the spectral brightness coefficient often occur, and specifically negative values in the IR region of the spectrum. The main objective of the study is to evaluate the influence of dust aerosol on the spectral dependence of sea brightness, based on analytical calculations from the transfer theory using the principle of plane-parallel layers and results of validation of AERONET-OC field and remote sensing data. The work analyzes spectral dependence of the first error eigenvector of the standard atmospheric correction in the presence of dust aerosol. As result it is given that with an absorbing aerosol, the atmospheric correction error is described by the spectral course of molecular scattering, i.e. close to

With the development of designing and manufacturing level for micro-electromechanical system (MEMS) gyroscopes, the control circuit system becomes a key point to determine their internal performances. Nevertheless, phase delay of electron components may result in some serious hazards. This paper describes a real-time circuit phase delay correction system for MEMS vibratory gyroscopes. A detailed theoretical analysis is provided to clarify the influences of circuit phase delay on the in-phase and quadrature (IQ) coupling characteristics and zero rate output (ZRO) utilizing force-to-rebalance (FTR) closed-loop detection and quadrature correction system. By deducing the relationship between amplitude-frequency, phase-frequency of MEMS gyroscope and the phase relationship of the whole control loop, a real-time correction system is proposed to automatically adjust the phase reference value of phase-locked loop (PLL) and thus compensate for the real-time circuit phase delay. The experimental results show that the correction system can accurately measure and compensate the circuit phase delay in real time. Furthermore, the unwanted IQ coupling can be eliminated and the ZRO is decreased by 755% to 0.095°/s. This correction system realizes a small angle random walk of 0.978°/√h, and a low bias instability of 9.458°/h together with a scale factor nonlinearity of 255 ppm at room temperature. Besides, the thermal drift of ZRO is reduced to 0.0034°/s/°C at a temperature range from -20°C to 70°C.

UAS-based multi-spectral imagery is becoming increasingly popular for the improved monitoring and managing of various horticultural crops. However, for UAS data to be used as an industry standard for assessing tree structure and condition as well as production parameters, it is imperative that the appropriate data collection and pre-processing protocols are established to enable multi-temporal comparison. There are several UAS-based radiometric correction methods commonly used for precision agricultural purposes. However, their relative accuracies have not been assessed for data acquired in complex horticultural environments. This study assessed the variations in estimated surface reflectance values of different radiometric corrections applied to multi-spectral UAS imagery acquired in both avocado and banana orchards. We found that inaccurate calibration panel measurements, inaccurate signal-to-reflectance conversion, and high variation in geometry between illumination, surface, and sensor viewing produced significant radiometric variations in at-surface reflectance estimates. Potential solutions to address these limitations included appropriate panel deployment, site-specific sensor calibration, and appropriate BRDF correction. Future UAS based horticultural crop monitoring can benefit from the proposed solutions to radiometric corrections to ensure they are using comparable image-based maps of multi-temporal biophysical properties.

A computational methodology for the hydrodynamic analysis of horizontal axis marine current turbines is presented. The approach is based on a boundary integral equation method for inviscid flows originally developed for marine propellers and adapted here to describe the flow features that characterize hydrokinetic turbines. To this purpose, semi-analytical trailing wake and viscous-flow correction models are introduced. A validation study is performed by comparing hydrodynamic performance predictions with two experimental test cases and with results from other numerical models in the literature. The capability of the proposed methodology to correctly describe turbine thrust and power over a wide range of operating conditions is discussed. Viscosity effects associated to blade flow separation and stall are taken into account and predicted thrust and power are comparable with results of blade element methods that are largely used in the design of marine current turbines. The accuracy of numerical predictions tend to reduce in cases where turbine blades operate in off-design conditions.

The Centers for Disease Control and Prevention (CDC) indicates that individuals with prediabetes are significantly less likely to develop type 2 diabetes if they participate in a lifestyle change program that results in at least 5% weight loss and 150 minutes of physical activity per week. The CDC recognizes distance learning as an effective delivery mode for lifestyle change programs to prevent type 2 diabetes. The purpose of this study was to assess enrollment, engagement, and effectiveness of a type 2 diabetes prevention program (DPP) using synchronous distance technology. Eat Smart, Move More, Prevent Diabetes (ESMMPD) is an intensive 12-month DPP delivered using synchronous distance technology. Throughout 26 lessons, participants focused on healthy eating, physical activity, and mindfulness behaviors. Study findings showed a significant decrease in A1C (-0.24 p<.0001). Weight loss averaged 5.66% for those who completed the program. Based on the Wilcoxon signed-rank test, participants demonstrated statistically significant changes in self-reported confidence in their ability to perform all 18 health-promoting behaviors assessed (p<.0001). Participation in the program also resulted in the adoption of health promoting behaviors. A DPP using synchronous distance technology is an effective delivery mode to help participants adopt healthy behaviors, increase physical activity, and achieve the weight loss necessary to prevent or delay the onset of type 2 diabetes.

For the electromagnetic eddy current testing, various methods have been proposed for reducing the lift-off error on the measurement of samples. In this paper, instead of eliminating the measurement error caused by the lift-off effect, an algorithm has been proposed to directly measure the lift-off distance between the sensor and non-magnetic conductive plates. The algorithm is based on a sample-independent inductance (SII) feature. That is, under high working frequencies, the inductance is found sensitive to the lift-off distance and independent of the test piece under an optimal single high working frequency (43.87 kHz). Furthermore, the predicted lift-off distance is used for the thickness prediction of the non-magnetic conductive samples using an iterative method. Considering the eddy current skin depth, the thickness prediction is operated under a single lower frequency (0.20 kHz). As the inductance has different sensitivities to the lift-off and thickness, the prediction error of the sample thickness is different from that of the lift-off distance. From the experiments on three different nonmagnetic samples – aluminium, copper, and brass, the maximum prediction error of the lift-off distance and sample thickness is 1.1 mm and 5.42 % respectively at the lift-off of 12.0 mm.

Temperature differences between the atmosphere and river water allow rivers to be used as a hydrothermal energy source. The river-water heat pump system is a relatively non-invasive renewable energy source; however, effluent discharged from the heat pump can cause downstream temperature changes which may impact sensitive fluvial ecosystems. In this study, the water temperature recovery distance of the effluent was estimated for a river section in the Han River Basin, Korea, using the heat transfer equation and the Environmental Fluid Dynamic Code (EFDC) model. Results showed that, compared to the EFDC model, the heat transfer equation tended to overestimate the water temperature recovery distance due to its simplified assumptions. The water temperature recovery distance could also be used as an objective indicator to decide the reuse of downstream river water. Furthermore, as the river system was found to support an endangered fish species that is sensitive to water environment changes, care should be taken to exclude the habitats of protected species affected by water temperatures within water temperature recovery distance.

In order to solve the problem of measuring the distance and position between the flanges of two pipelines on the seabed, a measuring device for pulling rope in seawater was designed. Aiming at the sealing problem of the key equipment that is the rotating shaft of the rope winch, this paper used the principle of the magnetic coupling to transfer the driving moment, and adopted the method of converting the dynamic seal into the static seal structure to realize the reliable sealing of the motor. Through the experiment of measuring two pipelines with underwater rope pulling device, it was verified that the measuring accuracy of the device meets the design requirements, and the feasibility of the application of magnetic coupling technology in winch is also verified.

Spectral photon counting cone-beam CT imaging is challenged by individual pixel response behaviour, which leads to noisy projection images and subsequent image artefacts like rings. Existing methods to correct for this either use calibration measurements, like signal-to-thickness calibration (STC), or perform post-processing ring artefact correction of sinogram data or scan reconstructions, without taking the pixel response explicitly into account. Here we present a novel post-processing method (DAC-shifting), which explicitly measures the current pixel response using flat field images, and subsequently corrects the projection data. The DAC-shifting method was evaluated with a repeat series of spectral photon counting imaging (Medipix3) of a phantom with different density inserts, and in iodine K-edge imaging. The method was also compared against PMMA based STC. The DAC-shifting method was shown to be effective in correcting individual pixel response, and was robust against detector instability. On the contrary, STC correction showed varying results, which was almost as good as DAC-shifting when data was acquired just after STC calibration, but worse with larger time differences. In K-edge imaging, DAC-shifting provides a sharper attenuation peak, and more uniform CT values, which is expected to benefit iodine concentration quantification.

Vein segmentation and projection correction constitute the core algorithms of auxiliary venipuncture device, responding to the accurate venous positioning to assist puncture and reduce the number of punctures and pain of patients. This paper proposes an improved U-Net for segmenting vein and a coaxial correction for image alignment in the self-build vein projection system. The proposed U-Net is embedded by Gabor convolution kernels in the shallow layers to enhance segmentation accuracy. Additionally, to mitigate the semantic information loss caused by channel reduction, the network model is lightweighted by the mean of replacing conventional convolutions with inverted residual blocks. During the visualization process, a method that combining coaxial correction and homography matrix is proposed to address the non-planarity of the dorsal hand in this paper. First, use a hot mirror to adjust the light paths of both projector and camera to be coaxial, and then align the projected image with dorsal hand using a homography matrix. Using this approach, the device requires only a single calibration before use. With the implementation of the improved segmentation method, an accuracy rate of 95.12% is achieved by the dataset. The intersection over union ratio between the segmented and original images is reached at 90.07%. The entire segmentation process is completed in a 0.09 second, and the largest distance error of vein projection onto dorsal hand is 0.53mm. Experiments show that the device has reached practical accuracy and has the value of research and application.

In view of the limitations of the existing optimization method of suspender cable force, in order to improve the stress of suspender under completion state and avoid frequent adjustment of cable force and grid beam elevation during construction, a new method of cable force optimization is proposed. The article takes the longest large span arch bridge in the world, Pingnan Third Bridge, a Concrete-filled steel tube (CFST) arch bridge with a span of 575m as the engineering background combined with the finite element analysis and multi-objective optimization method. One cable force optimization method that suspender “Real-time correction during construction, in the process variable optimal and results reliable” during panel girder lifting of long span CFST arch bridges is clarified. Taking the panel girder weight and displacement during the construction as parameter variables, the displacement and unevenness of the panel girder under completion state as constraint conditions, the displacement and cable force during the hoisting construction as the objective equation, through the optimization of the objective equation, the suspender cable force and dis-placement of each hoisting section are calculated. The results show that it is feasible to introduce the optimization theory into the cable force optimization when lifting the panel girder. the segment displacement variation is minimized to meet the destination. The cable force distributed evenly under completion state of the bridge that further making sure the completion state satisfies the requirements. No repeating iteration is needed, thus avoiding cumberso me calculation, getting cable force once. With higher optimization efficiency and better effects, the method provides high value for the cable force calculation of same type bridge suspender construction and for guiding construction.

Precipitation gauges are critical for measuring precipitation rates at regional and global scales and are often used to calibrate precipitation rates estimated from other instruments such as satellites. However, precipitation measured at the gauges is affected by gauge-undercatch that is often larger for solid precipitation. In the present work, two popular gauge-undercatch correction factors are assessed: one utilizes a dynamic correction model and is used in the Global Precipitation Climatology Centre (GPCC) Monitoring product and the other one employs a fixed climatology and is used in the Global Precipitation Climatology Project (GPCP) product. How much the choice of correction factors can impact the total estimate of precipitation was quantified over land at seasonal, annual, regional, and global scales. The correction factors are also compared as a function of the environmental variables used in their development, among those are near-surface air temperature, relative humidity, wind speed, elevation, and precipitation intensity. Results show that correction factors can increase the annual precipitation rate based on the gauges by ~9.5 % over the global land (excluding Antarctica), although this amount can vary from ~6.3% (in boreal summer) to more than 10% (in boreal winter), depending on the season and the method used for gauge-undercatch correction. Annual variations of correction factors can also be large, so the use of the fixed climatology correction factors requires caution. Given their magnitudes and differences, selection of appropriate correction factors can have important implications in refining the water and energy budget calculations.

All empirical water column correction methods have consistently been reported to require existing depth sounding data for the purpose of calibrating a simple depth retrieval model; they yield poor results over very bright or very dark bottoms. In contrast, we set out to (i) use only the relative radiance data in the image along with published data, and several new assumptions, (ii) in order to specify and operate the simplified radiative transfer equation (RTE), (iii) for the purpose of retrieving both the satellite derived bathymetry (SDB) and the water column corrected spectral reflectance over shallow seabeds. Sea truth regressions show that SDB depths retrieved by the method only need tide correction. Therefore it shall be demonstrated that, under such new assumptions, there is no need (i) for formal atmospheric correction, (ii) nor for conversion of relative radiance into calibrated reflectance , (iii) nor for existing depth sounding data, to specify the simplified RTE and produce both SDB and spectral water column corrected radiance ready for bottom typing. Moreover, the use of the panchromatic band for that purpose is introduced. Altogether, we named this process the Self-Calibrated Supervised Spectral Shallow-sea Modeler (4SM). This approach requires a trained practitioner, though, to produce its results within hours of downloading the raw image. The ideal raw image should be a “near-nadir” view, exhibit homogeneous atmosphere and water column, include some coverage of optically deep waters and bare land, and lend itself to quality removal of haze, atmospheric adjacency effect, and sun/sky glint.

Fermatean fuzzy sets (FFSs) are a versatile tool for handling uncertain problems and have shown great effectiveness in practical applications. However, many existing Fermatean fuzzy similarity measures exhibit counter-intuitive situations, making it challenging to accurately measure the similarity or difference between FFSs. To address this issue, several similarity and distance measures for FFSs are proposed, inspired by the Tanimoto similarity measure. The properties of the proposed measures are also explored, along with several comparative examples with existing measures for FFSs, which illustrate their superior performance in processing fuzzy information from FFSs. The proposed measures have effectively overcome the counter-intuitive challenges posed by many existing measures and significantly outperforms existing measures in differentiating different FFSs. Furthermore, we demonstrate the practical applicability of the proposed measures in solving pattern recognition, medical diagnosis and multiple-attribute decision-making problems.

A distinction is made between data rescue (i.e., copying, digitizing and archiving) and data recovery that implies deciphering, interpreting and transforming early instrumental readings and their metadata to obtain high-quality datasets in modern units. This requires a multidisciplinary approach that includes: palaeography and knowledge of Latin and other languages to read the handwritten logs and additional documents; history of science to interpret the original text, data e metadata within the cultural frame of the 17th, 18th and early 19th century; physics and technology to recognize bias of early instruments or calibrations, or to correct for observational bias; astronomy to calculate and transform the original time in canonical hours that started from twilight. The liquid-in-glass thermometer was invented in 1641 and the earliest temperature records started in 1654. Since then, different types of thermometers were invented, based on the thermal expansion of air or selected thermometric liquids with deviation from linearity. Reference points, thermometric scales, calibration methodologies were not comparable, and not always adequately described. Thermometers had various locations and exposures, e.g., indoor, outdoor, on windows, gardens or roofs, facing different directions. Readings were made only one or a few times a day, not necessarily respecting a precise time schedule: this bias is analysed for the most popular combinations of reading times. The time was based on sundials and local Sun, but the hours were counted starting from twilight. In 1789-90 Italy changed system and all cities counted hours from their lower culmination (i.e., local midnight), so that every city had its local time; in 1866, all the Italian cities followed the local time of Rome; in 1893, the whole Italy adopted the present-day system, based on the Coordinated Universal Time and the time zones. In 1873, when the International Meteorological Committee (IMO) was founded, later transformed in World Meteorological Organization (WMO), a standardization of instruments and observational protocols was established, and all data became fully comparable. In the early instrumental period, from 1654 to 1873, the comparison, correction and homogenization of records is quite difficult, mainly because of the scarcity or even absence of metadata. This paper deals about this confused situation, discussing the main problems, but also the methodologies to recognize missing metadata, distinguish indoor from outdoor readings; correct and transform early datasets in unknown or arbitrary units into modern units; finally, in which cases it is possible to reach the quality level required by WMO. The focus is to explain the methodology needed to recover early instrumental records, i.e., the operations that should be performed to interpret, correct, and transform the original raw data into a high-quality dataset of temperature, usable for climate studies.

In this note, we suggest a one-sample version of the recently proposed two-sample test for comparison of the means of multivariate samples. The test checks a hypothesis that the mean of multivariate sample is equal to a certain value with the alternative hypothesis that the mean does not equal to this value. The suggested test is illustrated by analysis of real-world and simulated data.

In the paper we present a new test for comparison of the means of multivariate samples with unknown distributions. The test is based on the comparison of the distributions of the distances between the samples’ elements and their means using univariate two-sample Kolmogorov-Smirnov test. The activity of the suggested method is illustrated by numerical analysis of the real-world and simulated data.

To protect power lines, distance relays are used which can rely on a modified distance resistance. But usually the operating range of these relays changes as the network conditions change (network topology, load value, output value, etc.) and leads to false trips, By using methods that can process information and recognize patterns, for example, the use of micro and intelligent processor algorithms can use the new relays with high precision and thus provide adequate protection. In this study, a distance relay was modeled using a neural network, and it was observed that the neural relay had higher accuracy than the conventional relay. In addition to detecting the fault and its location, type and phase of the fault, three-stage simultaneous protection can be performed. As a result, the number of linear relays can be reduced by using relays based on neural technologies. An MLP (multilayer perceptron) neural network is used to model a sequence of distances.

With increasing demand from unmanned driving and robotics, more attention has been paid to point cloud-based 3D object accurate detection technology. However, due to the sparseness and irregularity of the point cloud, the most critical problem is how to utilize the relevant features more efficiently. In this paper, we proposed a point-based object detection enhancement network to improve the detection accuracy in the 3D scenes understanding based on the distance features. Firstly, the distance features are extracted from the raw point sets and fused with the raw features about reflectivity of the point cloud to maximizing the use of information in point cloud. Secondly, we enhanced the distance features and raw features that we collectively refer to them as self-features of the key points in Set Abstraction (SA) layers with the self-attention mechanism, so that the foreground points can be better distinguished from the background points. Finally, we revised the group aggregation module in SA layers to enhance the feature aggregation effect of key points. We conducted experiments on the KITTI dataset and nuScenes dataset and the results show the enhancement method proposed in this paper has excellent performance.

The Translationally Controlled Tumor Protein (TCTP) is a multifunctional protein found in most eukaryotic taxa. In plants, TCTP regulates cell-cycle progression as well as programmed cell death and is involved in plant regeneration and responses to abiotic and biotic stress, among other functions. Additionally, there is evidence that the transcript and protein are transported over long-distance. Potatoes are a crop of agricultural interest that can reproduce asexually by regeneration from stolons and tubers. Therefore, in this study the effect of transient expression of Solanum tuberosum TCTP (StTCTP) on tuberization was analyzed. StTCTP mRNA was shown to be transported long-distance. Additionally, transient overexpression of StTCTP resulted in tuber bearing shoots with a greater diameter compared to control plants. Furthermore, the early stages of tuberization were induced compared to control plants, in which only mature tubers were observed.