A multispectral superconducting nanowire single photon detector sensitive to different incident photon wavelength bands, is proposed. The SNSPD consists of a Distributed Bragg Reflector, a gold mirror, and two regions employing four NbN nanowires. Using the DBR both as a filter and a reflector, two distinct detection bands are created. The first detection band has a peak absorbance of > 0.75 at a wavelength of 1143 nm, while the second band has an absorbance of > 0.70 in the wavelength range 1440 to 2000 nm. The design of the device can be tuned to provide sensitivity in different wavelength bands. While SNSPDs do not typically provide photon wavelength sensitivity, the band-selection design proposed in this work opens up potential applications for future quantum communication technology.

We demonstrated an ITO-free, highly transparent organic solar cell with the potential to be integrated into window panes for energy harvesting purposes. A transparent, conductive ZnO/Ag/ZnO multilayer electrode and a Ag:Ca thin film electrode were used in this transparent device as the bottom and top electrode, respectively. To further improve the transmittance of the solar cell, the thickness of the top ZnO layer was investigated by both experiment and simulation. An average visible transmittance of > 60% was reached, with a maximum transmittance of 73% at 556 nm. Both top and bottom illumination of the solar cell generated comparable power conversion efficiencies, which indicates the wide application of this solar cell structure. In addition, we fabricated distributed Bragg reflector mirrors with sputtered SiO2 and TiO2, which efficiently increased the power conversion efficiency over 20% for the solar cells on glass and PET substrates,

Historically, the military and non-religious, sub-continent’s intellectual elite Muslim men crafted state ideologies before partition, by actively contributing to sociocultural constructs prevalent to this day, in service of colonial patriarchal concepts. The purpose of this ideological collaboration has been to mould a Pakistani cis-gendered female child primarily into the ideal “Pakistan-Muslim” bride for marriage, carried out through her family and society. This has shaped the lives of cis-gendered female children in Pakistan through coerced, gendered control, implemented as prescriptive societal norms. These norms are rooted in colonial, patriarchal ideologies and are functions of capital and coercion intentionally perpetuated to erase her pluralistic identity, reducing her to a central resource within a family unit. To the military concept of nationalism, her mind and her body symbolize the unification and centralization of a statist ideology. Thus, the military state plays an essential role in shaping her purpose around the concept of nationalism. The intellectual elite, via the state, uphold colonial, patriarchal ideologies, where the primary identity of a cis-gendered female child is actualized through her marriage. The cis-gendered female child’s life is a vehicle to unify the state’s two-fold “Pakistani-Muslim” agenda, by implementing a ‘singular statist narrative’. A narrative that attempts to resolve two major tensions: First, it seeks to wipe out the possibility of a nation connecting with and exploring its own immense, internal ethnocultural diversity. It does this by imposing an imagined “homogenous Muslim” identity — which doesn’t exist — and is instead imported from multiple countries to reinforce a ‘singular statist narrative’, Second, it aims to control the mixing of local, sociocultural narratives by bridging any disjuncture between them by labelling colonial institutional patriarchy concepts as inherently “Pakistani”; in service of its preferred ‘singular statist narrative’.

Distributed deformation based on Fiber Bragg Grating sensors or other kinds of strain sensors can be used to evaluate safety in operating periods of bridges. However, most of the published researches about distributed deformation monitoring are focused on solid rectangular beam rather than box girder—a kind of typical hollow beam widely employed in actual bridges. Considering that the entire deformation of a single-cell box girder contains not only bending deflection but also two additional deformations respectively caused by shear lag and shearing action, this paper again revises the improved conjugated beam method (ICBM) based on the LFBG sensors to satisfy the requirements for monitoring two mentioned additional deformations. The best choice for the LFBG sensor placement in box gilder is also proposed in this paper due to strain fluctuation on flange caused by shear lag effect. Results from numerical simulations show that most of the theoretical monitoring errors of the revised ICBM are 0.3%~1.5%, and the maximum error is 2.4%. A loading experiment for a single-cell box gilder monitored by LFBG sensors show that most of the practical monitoring errors are 6%~8%, and the maximum error is 11%.

The aggregate aftermath of persistent inflammation in patients with inflammatory bowel disease (IBD) places them at increased risk for the advancement to colitis-associated colorectal cancer (CACRC). CACRC is preceded by IBD, the highly heterogenous, pharmacologically incurable, pertinacious, reverting/worsening, and immune-mediated inflammatory pathologies of the colon and rectum. The molecular and immunological basis of CACRC is highly correlated with the length/duration and stringency/severity of colon inflammation predisposed by the exogenous/free hemoglobin alpha chain (HbαC) the byproduct of infiltrating immune cells, extravasated erythrocytes, and macrophage erythrophagocytosis. The exogenous free HbαC prompts oxygen-free radical-arbitrated DNA damage (DNAD) through increased cellular reactive oxygen species (ROS) exacerbated by decreased tissue antioxidant defenses. Mitigation of Fenton reaction via pharmaceutical therapy would attenuate the ROS, promote apoptosis, DNAD repair, and subsequent prevent the incidence of CACRC. Three pharmaceutical options that attenuate hemoglobin toxicity include haptoglobin, deferoxamine, and flavonoids (vitamins C/E). Haptoglobin’s clearance rare from plasma is inversely correlated with its size; the smaller the size, the faster the clearance. Thus, the administration of Hp1-1 may prove to be beneficial. Furthermore, deferoxamine’s hydrophilic structure limits its ability to cross cell membranes. Thus, it may be beneficial if administered intracellularly to avoid the higher plasma concentrations and longer incubation periods associated with extracellular administration. Finally, the effectiveness of flavonoids and natural herb antioxidants is associated with high reactivity of hydroxyl substituents. Multiple analyses are currently underway to assess the clinical context of CACRC and outline the molecular basis of HbαC-induced ROS pathogenesis by exposing colonocytes and/or colonoids to HbαC. These cells are then treated with haptoglobin, deferoxamine (DFO), and flavonoids in order to separate free HbαC and measure their impact on hydroxyl radical formation therapies. The molecular pathogenesis of sporadic colorectal cancer (SCRC) i.e., “inflammation-dysplasia-carcinoma” progression sequence is well described, but the immunopathogenesis of CACRC herein reviewed is broadly still in prodromal stage/phase to be validated and understood. Therefore this timely review outlines the molecular and immunological basis of disease pathogenesis and the pharmaceutical intervention as a protective measure for CACRC.

Atta capiguara is a grass-cutting ant species frequently found in Cerrado biome. However, little is known about the giant nest architecture of this ant. In this study, we investigated the architecture of three A. capiguara nests from the fragment of cerrado in Botucatu, São Paulo, Brazil. Casts were made of the nests by filling them with cement to permit better visualization of internal structures such as chambers and tunnels. After excavation, the depth and dimensions (length, width, and height) of the chambers were measured. The results showed the typical shape of Atta capiguara nests consisting of mounds of loose soil with unique features resembling a conic section. The fungus chambers were found outside the apparent main part of the nest and were spaced apart and distributed laterally at ground level. The waste chambers were located beneath the largest mound of loose soil. Both the fungus and waste chambers exhibited a sectoral distribution. Our study contributes to a better understanding of the so far unknown nest architecture of the grass-cutting ant A. capiguara.

This paper presents a wideband dual-polarized dipole antenna structure operating at 1.7-3.8 GHz (76.4%). For a traditional 4G dipole antenna which covers the band 1.71 GHz- 2.69 GHz, it’s difficult to maintain the satisfactory impedance matching and normal stable radiation patterns within the 5G sub-6 GHz band 3.3-3.8 GHz, which mainly due to the fixed antenna height is no longer a quarter-wavelength. To solve this, a connected-ring-shaped metasurface structure is proposed and deployed to operate as an artificial magnetic conductor (AMC). As a result, stable antenna radiation patterns are obtained within the whole band 1.7-3.8 GHz. For verification, this wideband dipole antenna using AMC is implemented and tested. The measured results show that the proposed antenna has an impedance bandwidth of 80.7% (1.7-4.0 GHz). It has an average measured in-band realized gain of 7.0±1.0 dBi and a stable 70∘±5∘ half power beam width (HPBW) within the 4G/5G-sub 6GHz bands 1710-2690 MHz and 3300-3800 MHz.

In this project, four of fibers Bragg gratings were fabricated by injecting different volumes of liquids (star line Glass Mechanix optical adhesive material, olive oil diluted with ethanol) into the hollow core fiber. The amplitude splitting interferometric technique with a high resolution specially designed translation stage was used for the fabrication process. The fabrication was done using ultraviolet laser operated at wavelength 405nm. The fabricated Bragg length of the four fibers is equal to 3.8 cm. The results presented fiber Bragg grating (FBG) with successful fabrication at 653.3 nm Bragg reflected wavelength.

The electric vehicle (EV) industry is experiencing rapid growth, accompanied by continuous advancements in charging infrastructure to satisfy the rising need for fast and reliable charging. Particularly, the focus has shifted towards EV fast charging (EVFC) and its impact on the power grid. This paper presents a comprehensive analysis and survey of scholarly literature and projects conducted in this field over the past decade. The findings highlight the rising demand for EVFC and the need to address its potential adverse effects on the power grid. However, there is a noticeable lack of clear research guidance regarding charging time. To tackle these challenges and pave the way for future solutions, extensive research on DC fast charging, ultra-fast charging, and the integration of vehicle-to-grid (V2G) systems is required. This review paper thoroughly investigates the development of fast charging technology for electric vehicles (EVs), including its advantages and comparative analyses from various perspectives. Furthermore, it delves into the advancements in DC fast charging infrastructure, emphasizing charging standards and control modes. The study also investigates different categories of battery chargers for both on-board and off-board charging. Additionally, it explores the classification of DC-DC converters in the context of DC fast charging stations, discusses control strategies for EV systems, identifies existing challenges, and outlines future trends in EV fast charging.

Currently, there is a high interest in smart sensors and integrated composite materials in various industries such as construction, aviation, automobile, medical, information technology, communication, and manufacturing. Here, a new conceptual design for a force and temperature sensor system is developed by integrating fiber optic Bragg grating sensors embedded within composite materials, and a mathematical model is proposed that allows one to estimate strain and temperature based on signals obtained from optical Bragg gratings. This is important for understanding the behaviors of sensors under different conditions and for creating effective monitoring systems. Describing the strain gradient distribution, especially considering different materials with different values of Young's modulus, provides insight into how different materials respond to applied forces and temperature changes. The shape of the strain gradient distribution was obtained, which is a quadratic function with a maximum value of 1500 µ, with a maximum value at the center of the lattice and a symmetrically decreasing strain value with distance from the central part of the fiber Bragg grating. With axial strain at the installation site of the Bragg grating sensor under applied force values ranging from 10 to 11 N, the change in strain was linear. As a result of theoretical research, it was found that the developed system with fiber-optic sensors based on Bragg gratings embedded in composite materials is resistant to external influences and temperature changes.

We present a numerical calculation of the heat transport in a Bragg mirror configuration made of materials that do not obey Fourier's law of heat conduction. The Bragg mirror is made of materials that are described by the Cattaneo-Vernotte equation. By analyzing the Cattaneo-Vernotte equation's solutions, we define the thermal wave surface impedance to design highly reflective thermal Bragg mirrors. Even for mirrors with a few layers, very high reflectance is achieved ($>90\%$). The Bragg mirror configuration is also a system that makes evident the wave-like nature of the solution of the Cattaneo-Vernotte equation by showing frequency pass-bands that are absent if the materials obey the usual Fourier's law.

Five years ago, the concept of addressed fiber Bragg structures (AFBS) was proposed, which simultaneously perform the functions of a two-frequency radiation shaper, the difference frequency of which is the AFBS address, and a sensitive element, since the value of the difference frequency is invariant to measured physical fields, and the set of difference frequencies, moreover, is orthogonal in the array of such sensors, enabling their address multiplexing. In this article, we provide an overview of the theory and technology of AFBS, including the structures with three or more spectral components with various combinations of difference frequencies, symmetrical and asymmetric, performing the functions of the address and converting information signals to the low-frequency range at the same time, along with other functions. The subjects of interrogation of these structures, their fabrication and calibration are discussed as well. We also consider a wide range of applications in which AFBS can be used, covering such areas as oil and gas production, power engineering, transport, medicine, etc. In addition, the prospects of AFBS further development are proposed.

Sinkhole formation caused by leaking pipes in karst soluble rocks is a significant concern, leading to infrastructure damage and safety risks. In this paper, an experiment was conducted to investigate sinkhole formation in dense sand induced by a leaking pipe. Fibre Bragg gratings (FBGs) sensors were used to record the strain. A balloon was gradually deflated within a bed of wet silica sand to create an underground cavity. Eighteen FBG sensors, with a wavelength range between 1550 nm and 1560 nm, were embedded horizontally and vertically in the physical model at different levels to monitor deformation at various locations. A leaking pipe was installed to induce the collapse of the formed arch above the cavity. The strain measurements suggest four phases in the sinkhole formation process: (1) cavity formation, (2) progressive weathering and erosion, (3) catastrophic collapse, and (4) subsequent equilibrium conditions. The results showed differences in strain signatures and distributions between horizontal and vertical measurements. During the critical phase of sinkhole collapse, horizontal measurements primarily showed tension, while vertical measurements indicated compression. This investigation demonstrates the effectiveness of FBGs as advanced monitoring tools for sinkhole precursor identification. The study also suggests using FBGs in geotechnical monitoring applications to improve understanding and mitigation of sinkholes and related geohazards.

Structural deformations are one of the most significant factor that affects machine tool (MT) positioning accuracy. These induced errors are complex to be represented by a model, nevertheless they need to be evaluated and predicted in order to increase the machining performance. This paper presents a novel approach to calibrate a machine tool in real-time, analyzing the thermo-mechanical errors through Fibre Bragg Grating (FBG) sensors embedded in the MT frame. The proposed configuration consists of an adaptronic structure of passive materials, Carbon Fibre Reinforced Polymers (CFRP), equipped by FBG sensors that are able to measure in real-time the deformed conditions of the frame. By using a proper thermo-mechanical kinematic model, the displacement of the end effector may be predicted and corrected when it is subjected to external undesired factors. By starting from a set of FE simulations to develop a model able to describe the MT structure stresses, a prototype has been fabricated and tested. The scope was to compare the numerical model with the experimental tests using FBG sensors. The experimental campaign has been performed varying the structure temperature over time and measuring the tool tip point (TTP) positions. The obtained results showed a substantial matching between the real and the predicted position of TTP confirming the effectiveness of the proposed calibration system.

This review study explores and analyzes distributed database management systems (DDBMS), focusing on the important role of transparency methods in improving the functioning and interaction between users and systems. Transparency in DDBMS refers to several important factors, such as data, replication, performance, scaling, and network transparency. Each one of these components plays a role in concealing the intricate operations that underlie distributed systems from the end user. This not only speeds interactions but also enhances the reliability of the system. The article highlights the criticality of data independence as well as replication transparency in particular. Data independence enables adaptable modifications to the system's architecture and alterations to be made without causing any disruption to user activities. On the other hand, replication transparency ensures that the data remains consistently accurate across distributed nodes, even in the absence of user awareness. Moreover, the article investigates the progression of DDBMS through the incorporation of cutting-edge technologies such as quantum computation and artificial intelligence, which are anticipated to significantly augment the capabilities of data processing. The text proposes potential avenues for further investigation, emphasizing how these advancements may enhance the fundamental resilience of database management systems (DBMS) and expand their applicability in intricate, data-rich settings.

Facing global warming consequences is a major issue of present times. For what concerns climate, projections say that heavy rainfalls are going to increase with high probability together with temperature rise, thus also the hazard related to rainfall induced shallow landslides will likely increase in density over susceptible territories. Different modeling approaches exist and any of them is forced to make simplifications in order to reproduce landslide occurrences over space and time. Process based models can help in quantifying the consequences of heavy rainfall on the different involved processes. In this paper, a narrative review about physically-based deterministic distributed models (PBDDMs) is presented. Models were selected based on: the adoption of the infinite slope scheme (ISS), the use of a deterministic approach (i.e., input and output are treated as absolute values), the inclusion of new approaches in modeling slope stability through the ISS. Models are presented in chronological order with the aim of drawing a timeline of the evolution of PBDDMs and to give researchers and practitioners a basic knowledge on how much has been already done. Results indicate that including vegetation effects on slope stability has raised in importance over time but that there is still the need of finding an efficient way to include them, and that in the last years the literature production seems to be more focused on probabilistic approaches.

The group delay response of chirped fiber Bragg gratings (CFBG) written in polarization-maintaining fiber can be measured using the beat spectrum of the reflections from the two polarization axis, with a resolution and reproducibility better than 50 fs. The method is theoretically described, and we analyze the effect of group delay ripples (GDR) on the performance of a stretcher-compressor pair used in chirped pulse amplification systems. Ripples with a spectral period of the order of the pulse bandwidth are the most deleterious. Those are readily captured with our method, despite the limit on resolution due to the fiber polarization beat length. As a rule of thumb, the GDR should not exceed half the pulse duration. The reconstructed phase of the CFBG is also used to predict the pulse compression performance for a given device. Measurement of GDR as low as 161 fs is experimentally demonstrated.

It is meaningful to monitor and identify the concrete cracks as they will seriously reduce the fatigue life of pavement. In this paper a new method based on distributed long-gauge optic fiber sensing is proposed to implement the crack identification. Firstly, the damage indicator, namely strain curve envelope area ratio (SCEAR), is proposed and calculated with the measured strain in time series when the plane goes across the pavement where the sensors are installed. Then the indicators with different sensors are normalization by the value of the indicator from one referenced sensor where damage normally will not happen. If the crack happens within the sensing gauge of the sensor, the value of damage indicator SCEAR from the sensor will increase. Therefore, the crack will be identified with the change of the damage indicator. The effect of the proposed method is first verified by some simulations of prefabricated pavement as the cracks can be accurately identified by the proposed method. Moreover, the influence from the aircraft, such as taxiing position, aircraft load and aircraft type, is not obvious enough to mislead the identification results. Lastly the static loading tests were implemented with one small-scale model of prefabricated concrete pavement in the lab. From the experimental results the prefabricated cracks inside the pavement slab can be identified accurately with the proposes method as the parameter SCEAR is increased by about 100% at the crack position, while it is only changed by about 3% at the undamaged position.

A highly sensitive strain sensor based on tunable cascaded Fabry-Perot interferometers (FPIs) is proposed and experimentally demonstrated. Cascaded FPIs consist of a sensing FPI and a reference FPI which effectively generate the Vernier Effect (VE). The sensing FPI comprises a hollow core fiber (HCF) segment sandwiched between single-mode fibers (SMFs), and the reference FPI consists of a tunable air reflector, which is constituted by a computer programable fiber holding block to adjust the desired cavity length. Simulation results predict the dispersion characteristics of modes carried by HCF. The sensor’s parameters are designed corresponding to a narrow bandwidth range, i.e., 1530 nm to 1610 nm. Experimental results demonstrate that the proposed sensor exhibits optimum strain sensitivity of 23.9 pm/με in the range of 0 to 3000 με which is 13.73 times higher than the single sensing FPI strain sensitivity of 1.74 pm/με. The strain sensitivity of the sensor can be further enhanced by extending the source bandwidth. The proposed sensor exhibits ultra-low temperature sensitivity of 0.49 pm/°C in the wider temperature range of 25 °C to 135 °C, providing good isolation for eliminating cross-talk between strain and temperature. The sensor is very robust, cost-effective, easy to manufacture, repeatable, and shows a highly linear and stable response in the wider range of axial strain. Based on the sensor’s performance, it may suit plenty of practical applications in the real sensing world

Integrated Model of Distributed Systems is used for modeling and verification. In formalism, the distributed system is modeled as a collection of server states and agent messages. The evolution of the system takes the form of actions that transform the global system configuration (states and messages) into a new configuration. Formalism is used in the Dedan verification environment for finding different kinds of deadlocks: communication deadlocks in the server view and resource deadlocks in the agent view. For other purposes, a conversion has been developed to equivalent models: to Petri nets for structural analysis and do Distributed Autonomous and Asynchronous Automata (DA3) for easy graphical modeling in terms of system components. In addition, it is possible to simulate a verified system on distributed components in DA3. The automata have two forms: Server-DA3 (S-DA3) for the server view and Agent-DA3 (A-DA3) for the agent view. DA3 formalism is compared to other concepts of distributed automata known from the literature.

Distributed Denial of Service (DDoS) is among the commonly used type of network attacks, particularly aimed at the IoT devices in the emerging future wireless services specially for strictly latency-limited applications. DDoS attacks pose serious threats for many entrepreneurial businesses as they can prevent legitimate customers from accessing network resources of corporate websites, demanding intelligent analytics prior to entertaining a service request. DDoS involves exploiting the vulnerability of IoT devices by launching distributed multi-point attacks to generate high traffic by flooding the network of victims. The consequences of DDoS attacks could be worst in any Software-Defined Networking (SDN) than in traditional networks because SDN is configured as centralised architecture, failing to address the weaknesses current paradigm. However, SDN can play a crucial role in mitigating the effects of DDoS attacks as it bears the features of easy programmability, manageability, flexibility, and scalability. In this manuscript preliminary framework to detect DDoS attacks by mitigating their threats in an SDN architecture is presented. The authors propose a defense mechanism that uses OpenFlow and sFlow to mitigate the effects of DDoS attacks. The initial results show that the proposed model can minimize efficiently the consequences of DDoS attacks in an SDN type of architectural paradigm.

Reasonable allocation of production plans and saving the overall electricity cost are crucial for large manufacturing conglomerates, which is an effective way for conglomerates to realize open-source and cost-saving. This paper develops an optimization model of off-site industrial production scheduling for enterprises in response to the problems of high electricity costs due to the irrational allocation of production schedules on the demand side of China's electric power and the difficulty of promoting industrial and commercial distributed photovoltaic (PV) projects in China. The model makes full use of the conditions of different PV resources and different electricity prices in different places to optimize the scheduling of industrial production in different places. The model is embedded with two sub-models of the electricity price prediction model and distributed photovoltaic kWh cost model to complete the model parameters, in which the electricity price prediction model utilizes the LSTM neural network. The integrated model is then solved by the particle swarm algorithm. To verify the effectiveness of the model in solving the problem of off-site production scheduling on the demand side of electricity, the research team researched two off-site pharmaceutical factories belonging to the same large pharmaceutical company. Finally, the research data were substituted into the model for solving, and it was concluded that the optimization model could significantly reduce the cost of electricity consumption of the enterprise by about 7.9 %.

Field of Research This research study investigates the role of distributed leadership and culture within small enterprises in Malta, an area in which there has been very limited research. It focuses on the interaction between these two elements and their impact on organizational behaviour and effectiveness. Several studies (Jardon et al 2019; Cope et al., 2011; de Oliveira et al., 2015; Mohanty et al., 2012;) suggest that effective leadership and culture are vital elements in the successful endeavours of small organizations. Schein (2006) further asserts that they are two different faces on the same coin and the dyadic interaction characterizes “how leaders create culture and how culture defines and creates leaders”. Distributed Leadership is a systematic practice of interactions and synergies between leaders, followers, and the situation (Spillane 2013). It is different from traditional leadership, which involves top-down management because it tends to be more democratic and participatory, whereby influence and decision-making are shared among multiple individuals rather than being controlled by a single leader. (Xhemajli et al. 2022) Methodology Adopting a naturalistic approach and guided by an interpretivist, constructivist epistemological stance, this research delves into the intricate interplay between leadership and culture within small businesses. The chosen research methodology employs Grounded Theory, recognized for its robust and systematic process facilitating the observation of patterns through intensive iterative and highly analytical procedures (Charmaz, 2015).In the initial stages of field research, characterized by 'responsive interviewing' (Rubin and Rubin, 2012), data sampling commenced with convenience sampling. This initial phase gradually evolved into a refined strategy incorporating selective sampling and theoretical sampling (Corbin and Strauss, 2015). The shift in sampling approaches reflects a deliberate focus on collecting data based on its specific contribution to the development and comprehension of the dimensions, properties, and characteristics of key concepts.The induction of theory is a product of successive comparative analyses, involving the systematic comparison of data points to identify both similarities and variations. Abductive reasoning is integral throughout the analytical process, with particular emphasis during constant comparative analysis of categories, leading to theoretical integration (Charmaz, 2006). This meticulous approach aligns with the assertion of Strauss and Corbin (2015) that grounding theory in data enhances the likelihood of deriving theories that authentically reflect reality.The key advantage of using this approach is that the analysis carried out goes beyond deep exploration and rich description and actually develops a framework that explains the phenomena observed (Parker and Roffey, 1997, p.218). This is very important if the findings are to contribute to the knowledge enhancement of any field of practiceThe culmination of this research effort is the presentation of a set of interconnected concepts, intricately woven together into an emergent parsimonious model (Corbin and Strauss, 2015). This model serves to explain the dynamic interplay between leadership and culture, elucidating its tangible impact on the effectiveness of small enterprises. Research Contribution:Implications for Practice This research contributes to the literature on leadership and organizational culture in small enterprises, particularly in the context of Malta where such studies are scarce. By providing an initial exploration of these phenomena and their impact on organizational behavior, this paper lays the groundwork for further inquiry into this important area. Furthermore, the study offers practical insights for leaders of small enterprises by elucidating leadership behaviors observed in established organizations. Through applied cases, it demonstrates how the abstract concept of culture can be translated into a practical instrument that supports leadership and organizational development. This not only enriches the understanding of leadership dynamics but also provides tangible strategies for implementation. Moreover, the research contributes empirical evidence on the development of leadership functions within small enterprises, emphasizing the potential of shared and distributed leadership models. By grounding its findings in data, the study equips leaders with a deeper understanding of how these leadership approaches can shape organizational development, fostering more effective management practices in small businesses. Methodologically, the adoption of Grounded Theory methodology showcases its efficacy in exploring complex management phenomena. By employing this approach, the researchers were able to gather rich descriptions and develop an explanatory framework, highlighting its applicability in studying nuanced organizational dynamics. Implications for Policy and Theory This research also holds significant implications for policymakers, academic researchers and institutions involved in supporting small businesses. By providing insights into distributed leadership and cultural influences on organizational effectiveness, it offers a basis for informed policy formulation and support mechanisms. The conceptual model emerging from this study serves as a foundation for designing more targeted policies that cater to the unique needs of small enterprises. By understanding the intricacies of leadership dynamics and cultural contexts, policymakers can develop interventions that foster a conducive environment for small business growth and sustainability. Additionally, academic researchers can use these findings to further refine theoretical frameworks and empirical studies in the field, contributing to ongoing scholarly dialogue and knowledge advancement.

Deadlock is a real problem that can cause expensive, time-dependent hang-ups or failures in distributed computing systems. Some studies have been conducted with deadlock detection and resolution in generalized request computing models, most of these studies are based on the diffusing computation scheme, where forward and backward propagated probe and reply messages respectively are diffused between dependent processes. The replies carry the dependency information between processes for the initiator. Using this dependency information initiator can detect and resolve the deadlock cycle. It has been proven in the literature that a deadlock cycle length distribution is skewed with a large majority of cycles (90%) having length two. Based on this fact an improved algorithm is proposed for handling deadlock detection in distributed computing systems under the distributed request model where each process has several requests at a time. The improved algorithm depends mainly on message propagation and timeout policy. Probe and reply messages are propagated between the initiator and its successors only to detect deadlock cycles between them. Global timeout policy is used to detect potential deadlock cycles with large length distribution. The proposed algorithm can handle concurrent executions. Simulation experiments are performed to see the effectiveness of the improved algorithm. It is found that the improved algorithm compares favorably with other existing algorithms and it shows better results for several performance metrics especially in reducing deadlock latency and execution time.

This paper addresses the evolving landscape of electricity markets in Europe, with a focus on the integration of Renewable Energy Communities as introduced by the Renewable Energy Directive 2018/2001. Residents within a postal code area are highly incentivized to join a community, which enables them to exchange energy among themselves at lower procurement costs. Thereby, energy management systems optimize the operation of respective energy systems, with electrical load forecasting playing a key role. Given that prosumers may switch between communities on a daily basis, electricity demands within these groups will vary, leading to data that is non-stationary, discontinuous as well as non-identical and independently distributed. To encounter this issue, we propose a sophisticated forecasting model that applies federated learning, using informations from various distributed communities to learn domain-invariant features. To achieve this, we initially utilize synthetic electrical load time series at district level and aggregate them to profiles of Renewable Energy Communities with dynamic portfolios. Subsequently, we develop a forecasting model that accounts for the composition of residents of a Renewable Energy Community, adapt data pre-processing in accordance with the time series process, and detail a federated learning algorithm that incorporates weight averaging and data sharing. Following the training of various experimental setups, we ultimately evaluate their effectiveness. The findings suggest that our proposed framework is capable of effectively forecast non-stationary and discontinuous time series and that it can be applied to new, unseen data through the integration of knowledge from multiple sources.

The paper presents the results of a study of the concept of address fiber Bragg structures in the problem of vibration control. The mathematical model of measuring transformation is presented; the experimental study of a vibration diagnostics system based on Address Fiber Bragg Gratings is carried out; the quantitative and qualitative comparative assessment with electronic accelerometers is made; the gain by an order of magnitude in some parameters is shown.

The work presents an approach to instrument the load sensing bearings for automotive applications for estimation of the loads acting on the wheels. The system comprises fiber-optic sensors based on addressed fiber Bragg structures (AFBS) with two symmetrical phase shifts. A mathematical model for load-deformation relation is presented, and the AFBS interrogation principle is described. The simulation includes (i) modeling of vehicle dynamics in a split-mu braking test, during which the longitudinal wheel loads are obtained, (ii) the subsequent estimation of bearing outer ring deformation using a beam model with simply supported boundary conditions, (iii) the conversion of strain into central wavelength shift of AFBS, and (iv) modeling of the beating signal at the photodetector. The simulation results show that the estimation error of the longitudinal wheel force from the strain data acquired from a single measurement point was 5.44% with root-mean-square error of 113.64 N. A prototype load sensing bearing was instrumented with a single AFBS sensor and mounted in a front right wheel hub of an experimental vehicle. The experimental setup demonstrated comparable results with the simulation during the braking test. The proposed system with load-sensing bearings is aimed at estimation of the loads acting on the wheels, which serve as input parameters for active safety systems, such as automatic braking, adaptive cruise control, or fully automated driving, in order to enhance their effectiveness and safety of the vehicle.

This paper proposed a three-layer distributed simulation network architecture: 1. Distributed virtual simulation network, 2. Perception and control sub-network, and 3. Collaborative communication service network. This simulation architecture runs on a distributed platform. The platform can provide a unique virtual scenario and several simulation services to verify the individual robot system's basic perception, control, and planning algorithms and the distributed collaborative algorithms of heterogeneous multi-robot systems. Furthermore, we designed a simulation experiment scenario for classical heterogeneous robot systems such as unmanned aerial vehicles (UAVs) and unmanned ground vehicles (UGVs). At last, We gave a rough estimation model of the bandwidth.

The integration of the Internet of Things (IoT) and Distributed Computer Systems (DCS) is transforming business models across industries. IoT devices enable real-time monitoring of equipment and processes, reducing downtime and enhancing efficiency. In the case, manufacturing companies use IoT sensors to monitor machinery, predict failures, and schedule maintenance. Also, automation via IoT, reduces manual intervention, resulting in boosted productivity in smart factories and automated supply chains. IoT devices generate thus vast amounts of data, which businesses analyze to gain insights into customer behavior, operational inefficiencies, and market trends. In turn, distributed computer systems process this data, providing actionable insights and enabling advanced analytics and machine learning for future trend predictions. While, IoT facilitates personalized products and services by collecting data on customer preferences and usage patterns, enhancing satisfaction and loyalty, IoT devices support new customer interactions, like wearable health devices, and enable subscription-based and pay-per-use models in transportation and utilities. Conversely, real-time monitoring enhances security, as distributed systems quickly respond to threats, ensuring operational safety. It also aids regulatory compliance by providing accurate operational data. In this way, this study, through a Bibliometric Literature Review (LRSB) of 91 screened pieces of literature, aims at ascertaining to what extent the aforementioned capacities enhance business models. The study concludes that those systems leverage businesses, promoting competitive edge, continuous innovation, and adaptability to market dynamics. A review of 91 academic documents from the Scopus database highlights these impacts.

This article presents a buck converter in which the inductor has been replaced by a transmission line. This approach would be practically conceivable if the power supply and load have a greater spatial distance. In the time domain, this new converter can be described by a system of coupled partial and ordinary differential equations. In the frequency domain, a transcendental transfer function is obtained. For comparison with an equivalently parameterized conventional converter, Padé approximants are derived. A linear controller is designed for the converter topology under consideration.

Full-waveform seismic data inversion has given rise to hope for the simultaneous and automated execution of tomography and imaging by solving a nonlinear least-squares optimization problem. As previously recognized, brute force minimization by classical methods is hopeless if the data lacks low temporal frequencies. The article developed a reliable numerical method for recovering smooth velocity using model space decomposition. We present realistic synthetic examples to test the presented algorithm.

Solar concentrator photovoltaic collectors are able to deliver energy at higher temperatures for the same irradiances, since they are related to smaller areas for which heat losses occur. However, to ensure the system reliability, adequate collector geometry and appropriate choice of the materials used for all their components will be crucial. The present study focuses on the re-design of the C-PV collector reflector currently produced by the Swedish company Solarus AB, together with a comparative analysis based on the annual assessment of the solar irradiance in the collector. An open-source ray tracing code (Soltrace) is used to accomplish the modelling of optical systems in concentrating solar power applications. Symmetric parabolic reflector configurations are seen to improve the PV system performance when compared to the conventional structures currently used by Solarus. The parabolic geometries, using either symmetrically or asymmetrically placed receivers inside the collector, achieve both the performance and cost-effectiveness objectives: for almost the same area or costs, the new proposals for the PV system may be in some cases 70 % more effective as far as energy output is concerned.

This study explores the potential to reach a circular economy for post-consumer recycled polyethylene terephthalate (rPET) packaging and bottles by using it as a distributed recycling for additive manufacturing (DRAM) feedstock. Specifically, rPET is processed using only an open source toolchain with fused particle fabrication (FPF) or fused granular fabrication (FGF) processing. In this study, first the impact of granulation, sifting and heating (and their combination) is quantified on the shape and size distribution of the rPET flakes. Then feeding studies were performed to see if they could be printed through an external feeder or needed to be direct printed with a hopper using two Gigabot X machines, one with extended part cooling and one without. Print settings were optimized based on thermal characterization and for the latter which was shown to print rPET directly from shredded water bottles mechanical testing is performed. The results showed that geometry was important for extended feeding tubes and direct printed using a hopper. Further there is a wide disparity in the physical properties of rPET from water bottles depending on source and the history of the material. Future work is needed to enable water bottles to be used as a widespread DRAM feedstock.

This study's objective was to propose the use of textile braiding manufacturing methods, thus facilitating the application of the high precision and accurate measurability of optical fiber Bragg grating sensors to various structures. The purpose of this study was to Combine 3d braid processing with the optical Bragg grating sensor's accurate metrology. Out of limits of the sensor's epoxy attachment methods, the textile braiding method can make applicable scope diversify. The braiding processing is capable of designing a 3D fabric module processing, multiple objective mechanical fiber arrangement, and material characteristics. Optical stress-strain response conditions were explored through the optimization of design elements between the Bragg grating sensor and braiding. For this study, Bragg grating sensors were located 75% apart from the fiber center. The sensor core structure is helical of 1.54 pitch. A polyurethane synthetic yarn was braided together with the sensor on the Weaving machine core part in a braiding. Prototyping results, a negative Poisson's ratio makes curled the braided Bragg grating sensor. The number of polyurethane string yarns has been conducted the role of wrap angle in braiding. The 12 strands condition showed an increase in double stress-strain response rate at a Poisson ratio of 1.3%, and 16 strands condition was found to affect the sensor with noise at a Poisson ratio of 1.5%. This study can suggest applying braid processing of the Bragg grating sensor, which is expected to create and develop a new monitoring sensor.

This study's objective was to propose the use of textile braiding manufacturing methods, thus facilitating the application of the high precision and accurate measurability of optical fiber Bragg grating sensors to various structures.The purpose of this study was to Combine 3d braid processing with the optical Bragg grating sensor's accurate metrology. Out of limits of the sensor's epoxy attachment methods, the textile braiding method can make applicable scope diversify. The braiding processing is capable of designing a 3D fabric module processing, multiple objective mechanical fiber arrangement, and material characteristics. Optical stress-strain response conditions were explored through the optimization of design elements between the Bragg grating sensor and braiding. For this study, Bragg grating sensors were located 75% apart from the fiber center. The sensor core structure is helical of 1.54 pitch. A polyurethane synthetic yarn was braided together with the sensor on the Weaving machine core part in a braiding.Prototyping results, a negative Poisson's ratio makes curled the braided Bragg grating sensor. The number of polyurethan string yarns has been conducted the role of wrap angle in braiding. The 12 strands condition showed an increase in double stress-strain response rate at a Poisson ratio of 1.3%, and 16 strands condition was found to affect the sensor with noise at a Poisson ratio of 1.5%. This study can suggest applying braid processing of the Bragg grating sensor, which is expected to create and develop a new monitoring sensor.

Deformation monitoring is beneficial to ensure the service safety of long tunnel. An three-direction (vertical, transverse and axial) deformation estimation method using long-gauge fiber Bragg grating (FBG) sensing technology is proposed and applied to a long tunnel by integrating mechanical analysis and field monitoring during the service state. The key issues of the proposed method for identifying the three-direction deformation are discussed, such as establishing the separation model of coupling strain on cross section, deriving the theory of deformation identification in three directions, and determining the sensor layout of the long tunnel. A major advantage of the proposed method is that the three-direction deformation of the tunnel can be monitored in real time using distributed long-gauge strain sensors. The numerical analysis and field test results verify the feasibility of the proposed method.

The Linear Fresnel Reflectors are a solar concentration technology that is versatile and can serve many industrial processes or thermal conditioning. Such collectors entail a certain footprint, generating shading on the surface where they are installed. This effect is rarely quantified but may play an indirect role on the surface below. When installed on a roof, the solar radiation heats the building less. In places where the annual heating demand is higher than the cooling demand, this constitutes an asset. However, this becomes a disadvantage when the cooling demand is higher annually than the heating demand. Essentially, the reduced solar radiation allows the growth of plants that would not grow without the shade provided by the collector. The present paper is a quantitative analysis of such shading based on the Linear Fresnel Reflector of the Cyprus Institute. The work was conducted using the Tonatiuh++ ray-tracing software to determine the annual radiation blocking. A total of four years of actual meteorological measurements were applied directly to the ray-tracing model.

Enclosed public spaces are the hotspots for airborne disease transmission. To measure and maintain indoor air quality in terms of airborne transmission, an open source, low cost and distributed array of Particulate Matter Sensors has been developed and named as Dynamic Aerosol Transport for Indoor Ventilation or DATIV system. This system can use multiple Particulate Matter Sensors (PMS) simultaneously and can be remotely controlled using a Raspberry Pie based operating system. The data acquisition system can be easily operated using the GUI within any common browser installed on a remote device such as a PC or Smartphone with corresponding IP address. The software architecture and validation measurements are presented together with possible future developments.

The volatility and uncertainty associated with the high proportion of wind and PV output in the new power system significantly impact power and energy balance, making it challenging to accurately assess the risks related to renewable energy abandonment and supply guarante. Therefore, a probabilistic power and energy balance risk analysis method based on distributed robust optimization is proposed. Firstly, the affine factor and the flexible ramp reserve capacity of thermal power are combined to establish a probabilistic index, which serves to characterize the risk associated with power and energy balance. Drawing upon the principles of conditional value at risk theory, the risk indexes of load shedding power and curtailment power under a certain confidence probability are proposed. Secondly, the probability distribution fuzzy sets of uncertain variables are constructed using the distributionally robust method to measure the Wasserstein distance between different probability distributions. Finally, aiming at minimizing the operation cost of thermal power, the risk cost of power abandonment and the risk cost of load shedding, a distributed robust optimal scheduling model based on flexible ramp reserve of thermal power is established.

Considering the spectrum shortage problem of IoT devices, we introduce a collaborative spectrum sensing (CSS) framework in this paper to identify available spectrum resources, so that IoT devices can access it and meanwhile avoid causing harmful interference to the normal communication of the primary user (PU). However, in the process of the PU’s signal detection in IoT devices, the issue about the stopping time and decision cost arises. To this end, we propose a distributed cognitive IoT model, which includes two IoT devices independently using sequential decision rules to detect the PU. On this basis, we define the stopping time and cost function for IoT devices, and formulate an average cost optimization problem in CSS. To solve this problem, we further regard the optimal stopping time problem as a finite horizon problem, and solve the threshold of the optimal decision rule by dynamic programming. At last, numerical simulation results demonstrate the correctness of our proposal in terms of the global false alarm and miss detection probability, and it always achieves minimal average cost under various cost of each observation taken and thresholds.

Modern building automation systems implement plenty of advanced control and monitoring functions considering various parameters like users’ activity, lighting, temperature changes etc. Moreover, new solutions based on Internet of Things and cloud services are also being developed for smart buildings to ensure comfort of use, user safety, energy efficiency improvements and integration with smart grids and smart city platforms. Such a wide spectrum of technologies and functions requires a new approach in building automation systems design to provide effective way of their implementation and flexibility during operation. At the same time, in the building design and operation industries, tools based on building information modeling and digital twins are being developed. In this paper, the authors discuss development directions and application areas of these solutions, identifying new trends and possibilities of their use in smart homes and buildings. In particular, the focus is on procedures for selecting automation functions, effective integration, and interoperability of building management systems with Internet of Things considering organization of prediction mechanisms and dynamic functional changes in buildings and smart networks. Chosen solutions and functions should consider the requirements from EN ISO 52120 standard and the guidelines defined for the Smart Readiness Indicator.

Consumer IoT (CIoT) manufacturers seek customer feedback to enhance their products and services, creating a smart ecosystem like a smart home. Due to security and privacy concerns, Blockchain-based federated learning (BCFL) ecosystems can let CIoT manufacturers update their Machine Learning (ML) model using end-user data. FL uses privacy-preserving ML techniques to forecast customers' needs and consumption habits, and blockchain replaces the centralised aggregator to safeguard the ecosystem. However, Blockchain technology (BCT) struggles with scalability and quick ledger expansion. In BCFL, local model generation and secure aggregation are other issues. This research contributes a novel architecture emphasising Gateway Peer (GWP) in blockchain network to resolve scalability, ledger optimisation and secure model transmission issues. In the architecture we replace the centralised aggregator by the blockchain network, while GWP restricts the number of local transactions to execute in BCN. Considering the security and privacy of FL processes, we have added differential privacy and advanced normalisation techniques to ML processes. The approaches strengthen end-users' cyber security and encourage the adoption of technological innovation standards by service providers. The proposed approach has been tested extensively using a well-respected Stanford Cars dataset. We experimentally demonstrate that the proposed architecture makes the network scalable and optimises the ledger significantly. In addition, the normalisation technique outperforms batch normalisation when features are under DP protection.

Based on the need for real-time sag monitoring of Overhead Power Lines (OPL) for electricity transmission, this article presents the implementation of a hardware and software system for online monitoring of OPL cables and cable sag determination. The mathematical model based on differential equations and the methods of algorithmic calculation of OPL cable sag are presented. Considering that, based on the mathematical model presented, the calculation of OPL cable sag can be done in different ways depending on the sensors used, and the presented application uses a variety of sensors. Therefore, a direct calculation is made using one of the different methods. Subsequently, the verification relations are highlighted directly and, respectively, the calculation by the alternative method, which uses another group of sensors, to generate both a verification of the calculation and the functionality of the sensors, thus obtaining a defect observer of the sensors. The hardware architecture of the OPL cable online monitoring application is presented, together with the main characteristics of the sensors and communication equipment used. The configurations required to transmit data using the ModBUS and ZigBee protocols are also presented. The main software modules of the OPL cable condition monitoring application are described, which ensure the monitoring of the main parameters of the power line and the visualisation of the results both on the electricity provider's intranet using a web server and MySQL database, and on the Internet using an Internet of Things (IoT) server. This categorisation of the data visualisation mode is done in such a way as to ensure a high level of cyber security. Starting from the mathematical model of the OPL cable sag calculation, it goes through the stages of creating such a monitoring system, from the numerical simulations carried out using Matlab to the real-time implementation of this monitoring application. The main modules of the application software are: the software module for reading quantities from the sensor network through a ModBUS Input/Output (I/O) server, the software module for real-time calculation of the OPL cable sag, the software module for read/write operations based on MySQL type data, the software module for transferring data to the user's intranet through a web server, and the software module for viewing data by authorised users based on user and password through an IoT server. The development software environments used are Matlab and Laboratory Virtual Instrument Engineering Workbench (LabVIEW).

Blockchain technology has emerged as a necessity for the decentralization of payment methods and transactions, but it has brought with it many properties of distributed systems that have made it a crucial technology for overcoming some of society's challenges, especially in the context of decentralizing services, transparency of information, availability, and security. Its architecture and communication methods, although possessing some complex nuances to understand, particularly for the lay audience in the field of distributed systems, protocols, and computer networks. In this article, we will explore some topics of distributed systems related to blockchain technology.

This study examined how practice distribution schedules influenced accuracy and efficacy in the tennis serve. 24 recreational players were randomized into two experimental groups. Both groups carried out 4 series of 10 services per session during 12 sessions. Massed practice group did not rested between services and rested 10 seconds between series. Distributed practice group rested 10 seconds between services and 30 seconds between series. The accuracy and efficacy were registered and computed based on the 2D digitalization. The learning and retention were tested in a post-test and retention test. The learning program increased the efficacy in the post-test in both groups (p =.001 massed group; p =.015 distributed group). On the retest, the group of massed practice decreased efficacy (p =.021). In accuracy, the group of massed practice reduced its performance in the post-test (p =.015). The effects of the program on the accuracy in the retention test were not observed. It is concluded that this type of sports learning programs, applied at a recreational level, can provide a rigorous approach that contributes with guarantees to the learning of tennis.

The azimuth wheel-rail of large aperture radio telescope is the key component, it not only sup-ports the whole weight of the antenna, but also directly affects the pointing performance of the antenna with its surface accuracy. The whole weight of the radio telescope is hundreds or even thousands of tons, its azimuth frame rollers have great contact stress with the wheel-rail surface, repeated rolling can cause rolling contact fatigue on the wheel-rail surface, resulting in wear, cracks and other damage to the wheel-rail, and even lead to failure or fracture of the wheel-rail in serious cases, so it is very important to monitor the damage of the antenna wheel-rail. In order to visually detect the use of antenna wheel-rail surface, this paper proposed the method using electromagnetic ultrasonic detection to detect the damage of antenna wheel-rail surface for the first time. Based on the electromagnetic ultrasonic nondestructive testing principle, the simplified wheel-rail model containing wear, corrosion and crack damage is simulated. The results show that this method can effectively detect the surface damage of the antenna wheel-rail surface, and it can provide an important reference for the research of wheel-rail damage detection of large radio telescope.

In this work, an evanescent Bragg grating sensor inscribed in a few-mode planar polymer waveguide was integrated in microchannel structures and characterized with various chemical applications. The planar waveguide and the microchannels consisted of epoxide-based polymers. The Bragg grating structure was post-processed using point-by-point direct inscription technology. By monitoring the central wavelength shift of the reflected Bragg signal, the sensor showed a temperature sensitivity of -47.75 pm/K. Moreover, the functionality of the evanescent field-based measurements is demonstrated with two application examples: refractive index sensing of different aqueous solutions and gas-phase hydrogen concentration detection. For the latter application, the sensor was additionally coated with a functional layer based on palladium nanoparticles. During the refractive index sensing measurement, the sensor achieved a sensitivity of 6.5 nm/RIU from air to 99.9% pure isopropyl alcohol. For the gas-phase hydrogen detection, the coated sensor achieved a reproducible concentration detection up to 4 vol% hydrogen. According to the reported experimental results, the integrated Bragg grating-based waveguide sensor demonstrates high potential for applications based on lab-on-a-chip concept.

Road infrastructure is a key public asset because it benefits the social and economic development of any country. It plays an important role for the development of the industrial complex, the production sector and the road surfaces of transport roads should be of high quality, have a long service life. Road infrastructure, as well as all infrastructure, requires preservation, maintenance and repair. There are special requirements for the roadway that must be observed during construction or repair. This article is devoted to a detailed study of the use of fiber optics sensors (FOS) based on the fiber Bragg grating (FBG) for road surface monitoring. Such a fiber sensor consisting of a fiber Bragg grid and a pair of grids can offer the possibility of simultaneous measurement of deformation and temperature for monitoring the pavement. Temperature and deformation measurements were carried out by installing a sensor on the surface of a made asphalt sample. The built-in fiber sensor based on FBG provides important information about how the pavement structure can withstand the load, subsidence of soil, timely implement road safety and stability measures evaluate and predict the service life of the pavement. The results of the study showed that the synchronicity, repeatability and linearity of the characteristics of the fiber sensor are excellent. The difference between the experimental and theoretical results is about 7%. Thus, based on the results of the obtained data, the fiber sensor on the FBG can be used for monitoring, designing road surfaces and in general transport infrastructure.

A distributed bragg reflector is designed to get an optical reflectance on visible electromagnetic spectrum i.e. ~800 nm in this work. Device is realized based on Abele’s matrix for TE mode.

The Cosmic-Ray Extremely Distributed Observatory (CREDO) is a project dedicated to global studies of extremely extended cosmic-ray phenomena, the cosmic-ray ensembles (CRE), beyond the capabilities of existing detectors and observatories. Up to date cosmic-ray research has been focused on detecting single air showers, while the search for ensembles of cosmic-rays, which may overspread a significant fraction of the Earth, is a scientific terra incognita. Instead of developing and commissioning a completely new global detector infrastructure, CREDO proposes approaching the global cosmic-ray analysis objectives with all types of available detectors, from professional to pocket size, merged into a worldwide network. With such a network it is possible to search for evidences of correlated cosmic-ray ensembles. One of the observables that can be investigated in CREDO is a number of spatially isolated events collected in a small time window which could shed light on fundamental physics issues. The CREDO mission and strategy requires active engagement of a large number of participants, also non-experts, who will contribute to the project by using common electronic devices (e.g. smartphones). In this note the status and perspectives of the project is presented.

Molten salt reactors have gained substantial interest in the last years due to their flexibility and their potential for simplified closed fuel cycle operation for massive net-zero energy production. However, a zero-power reactor experiment will be an essential first step into the process delivering this technology. The choice of the optimal reflector material is one of the key issues for such experiments since on the one hand it offers huge cost saving potential due to reduced fuel demand, on the other hand an improper choice of the reflector material can have negative effects on the quality of the experiments. The choice of the reflector material is for the first time introduced through a literature review and a discussion of potential roles of the reflector. The 2D study of different potential reflector materials has delivered a first down selection with SS 304 as representative for stainless steel, lead, copper, graphite, and beryllium oxide. A deeper look identified in addition iron-based material with high Si content. The following evaluation of the power distribution has shown the strong influence of the moderating reflectors creating a massively disturbed power distribution with a peak at the core boundary. This effect has been confirmed through a deeper analysis of the 2D multi-group flux distribution which lead to the exclusion of the BeO and the graphite reflector. The most promising materials identified have been SS 304, lead, and copper. The final 3D Monte-Carlo study demonstrated that all three materials have the potential to reduce the required amount of fuel by up to 60% compared NaCl which has been used in previous studies and is now taken as reference A first cost analysis has identified the SS 304 reflector as the most attractive solution. The results of the 2D multi group deterministic study and the 3D multi group Monte-Carlo study have been confirmed through a continuous energy Monte-Carlo reference calculation showing only minor differences.

The Cosmic Ray Extremely Distributed Observatory (CREDO) is a newly formed, global collaboration dedicated to observing and studying cosmic rays (CR) and cosmic ray ensembles (CRE): groups of a minimum of two CR with a common primary interaction vertex or the same parent particle. The CREDO program embraces testing known CR and CRE scenarios, and preparing to observe unexpected physics, it is also suitable for multi-messenger and multi-mission applications. Perfectly matched to CREDO capabilities, CRE could be formed both within classical models (e.g. as products of photon-photon interactions), and exotic scenarios (e.g. as results of decay of Super Heavy Dark Matter particles), their fronts might be significantly extended in space and time, and they might include cosmic rays of energies spanning the whole cosmic ray energy spectrum. CRE are expected to be partially observable on Earth even if the initiating interaction or process occurs as far as ~1 Gpc away. They would have a footprint composed of at least two extensive air showers with correlated arrival directions and arrival times. Since CRE are mostly expected to be spread over large areas and, because of the expected wide energy range of the contributing particles, CRE detection might only be feasible when using available cosmic ray infrastructure collectively, i.e. as a globally extended network of detectors. Thus, with this review article, the CREDO Collaboration invites the astroparticle physics community to actively join or to contribute to the research dedicated to CRE, and in particular to share any cosmic ray data useful for the specific CRE detection strategies.

The object of research is an optical-electronic system for recording and processing signals from fiber-optic sensors. Due to the use of optical fibers as sensitive elements, there is no influence on the measurement result of electromagnetic fields, spurious electromagnetic radiation, channel crosstalk, there are no problems, electrical safety is significantly increased, there are no problems of arcing and sparking. A scheme of a receiving-transmitting module has been developed, which is additionally equipped with a preliminary protection and filtering system. Further, measuring tracks, microcontroller software and functional tests were ordered to determine the metrological properties of the proposed system.Signal integrity analysis is presented, which allows you to check whether the signals present in the device are correctly transmitted between their sources and receivers. The analysis of signal integrity is investigated, which is performed in two stages of the device design process. Modeling of the studied module in the specialized program Altium Designer. With the help of this program, potential problems were found, such as the occurrence of crosstalk between paths, the exact values of some elements, accurate analytical calculation. Learned an impedance analysis trace for a given connection's parameters, where the value affects the shape of the given path, its physical dimensions, distance from other paths, and other physical properties of the board. Optoelectronic system for recording and processing signals from fiber optic sensors based on Bragg fiber gratings resistant to electromagnetic interference and temperature, for use in modern systems for monitoring building structures, bridges, tunnels, dams, high-rise buildings, railways, oil platforms, buildings, pipelines.

Prestress loss evaluation in prestressed strand is essential for prestressed structures. However, the sensors installed outside the duct can only measure the total prestress loss. The sensors attached on strand inside the duct also have several problems, such as inadequate durability in an aggressive environment, vulnerable damage at tensioning and so on. This paper proposes a new installation method for long-gauge fiber Bragg grating (LFBG) sensor to prevent accidental damage. Then the itemized prestress losses were determined in each stage of the pre-tensioning and post-tensioning according to the LFBG measurements. We verified the applicability of the LFBG sensors for prestress monitoring and the accuracy of the proposed prestress loss calculation method during pre-tensioning and post-tensioning. In the pre-tensioning case, the calculated prestress losses had less deviation from the true losses than those obtained from foil-strain gauges, and the durability of the LFBG sensors was better than foil-strain gauges, whereas in post-tensioning case, the calculated prestress losses were close to those derived from theoretical predictions. Finally, we monitored prestress variation in the strand for 90 days. The itemized prestress losses at each stages of post-tensioning were obtained by the proposed calculation method to show the prospect of the LFBG sensors in practical evaluation.

Long non-coding RNAs (lncRNAs) are involved in numerous biological processes and serve crucial regulatory functions in both animals and plants. Nevertheless, there is limited understanding of lncRNAs and their patterns of expression and roles in sharks. In the current study, we systematically identified and characterized lncRNAs in the blue shark Prionace glauca from four tissues (liver, spleen, muscle, and kidney) using high-throughput sequencing and bioinformatics tools. A total of 21,932 high confidence lncRNAs were identified with 8,984 and 3,067 stably and tissue-specific expressed lncRNAs, respectively. In addition, a total of 45,007 differentially expressed (DE) lncRNAs were obtained among tissues, with kidney versus muscle having the largest numbers across tissues. DE lncRNAs trans target protein-coding genes were predicted, and functional gene ontology enrichment of these genes showed GO terms such as muscle system processes, cellular/metabolic processes, and stress and immune responses, all of which correspond with the specific biological functions of each tissue analyzed. These results advance our knowledge of lncRNAs in sharks and present novel data on tissue-specific lncRNAs, providing key information to support future functional shark investigations.

While advances in information and communication technology have increased the efficiency of information distribution, it has also brought several challenges to the database industry. One of the main challenges is ensuring the real-time availability of data, which is critical. In addition, downtime in centralized database systems can cause significant failures. Therefore this research applies database replication, especially the multi-master method, is used to increase availability and reduce the possibility of failure. For distributed transaction distribution, this research uses the auto-promote master method and web services for PostgreSQL database replication. The focus of the research is on real-world college site selection transactions, where speed, scalability, and high data availability are critical. The results show that combining these methods can improve system performance and protect data availability. With fast response time, high throughput, and low error rate, the API performs well with various loads. As a testament to scalability and reliability, the system can handle large volumes of traffic without experiencing significant crashes. For containerization, Docker supports efficient and stable performance and ensures consistency and manageability. Future recommendations include improving the data security mechanism and further efforts to optimize the distribution system architecture.

Fused silica glass is a material with outstanding mechanical, thermal and optical properties. Being a brittle material, it is challenging to shape. In the last decade, the manufacturing of monolithic flexible mechanisms in fused silica has evolved with the femtosecond laser-assisted etching process. However, instrumenting those structures is demanding. To address this obstacle, this article proposes to inscribe a Bragg Grating sensor inside a flexure and interface it with an optical fibre to record the strain using a spectrum analyzer. The strain sensitivity of this Bragg Grating sensor is characterized at 1.2 pm/μϵ (1 μϵ = 1 microstrain). Among other applications, deformation sensing can be used to record a force. Its use as a micro-force sensor is estimated. The sensor resolution is limited by our recording equipment to 30 μN over a measurement range above 10 mN. This technology can offer opportunities for surgery applications or others where precision and stability in harsh environments are required.

In the last four years, the evolution and adoption of blockchain and, more generally, distributed ledger systems have shown the affirmation of many concepts and models with significant differences in system governance and suitable applications. This work aims to update the critical analysis of blockchain technologies carried out by our previous contribution to this journal, extending the focus to distributed ledger components and systems. Starting from the topical concept of decentralization, we introduce concepts and building blocks currently adopted in the available systems centering on their functional aspects and impact on possible applications. We present some conceptual framing tools helpful in the application context, and we will propose the concept of process authenticity, which we will discuss through two use cases: blockchain document dematerialization and e-voting.

In this paper, two types of the general fractional derivatives of distributed order as well as a corresponding fractional integral of distributed type are defined and their basic properties are investigated. The general fractional derivatives of distributed order are constructed for a special class of the one-parametric Sonin kernels with a power law singularities at the origin. The conventional fractional derivatives of distributed order based on the Riemann-Liouville and the Caputo fractional derivatives are particular cases of the general fractional derivatives of distributed order introduced in this paper.

The distributed long-range sensing system using the standard telecommunication single-mode optical fiber in a function of a distributed sensor for sensing of mechanical vibrations is described. Various events generating vibrations such as walking or running person, moving cars, trains and others can be detected, localized and classified. The sensor and related sensing system components were designed and constructed and the system was tested both in the laboratory and in the real situation with 88 km telecom optical link, and the results are presented.

Phenotypic studies require large datasets for accurate inference and prediction. Collecting plant data in a farm can be very labor intensive and costly. This paper presents the design, architecture (hardware and software) and deployment of a distributed modular agricultural multi-robot system for row crop field data collection. The proposed system has been deployed in a soybean research farm at Iowa State University.

In the era of Big Data and the Internet of Things (IoT), ensuring the security and privacy of patient data within distributed health systems is paramount. This research delves into the challenges posed by these advancements and explores viable solutions, focusing notably on blockchain technology, data encryption methods, and access control mechanisms. Employing a comprehensive literature review approach, the study synthesizes current research findings, complemented by analyses of existing frameworks and case studies from healthcare organizations, offering practical insights. Interviews with cybersecurity experts and healthcare IT professionals provide nuanced perspectives on current security issues and emerging trends. Through qualitative and quantitative data analyses, the study generates recommendations aimed at enhancing patient data security. These include the adoption of new frameworks and innovative technologies to fortify healthcare data systems. By addressing these critical aspects, this research aims to significantly contribute to the advancement of a more secure and efficient healthcare ecosystem in today's digital landscape.

Remote distributed generation control and demand response is nowadays a basic need, especially for the Distributed Network Operators (DNOs). The integration of Renewable Energy Sources (RES) with stochastic production characteristics into the grid in conjunction with the newly appeared stochastic demand consumers (i.e., electric vehicles) hardens the ef-forts of the DNOs to keep the grid’s operation within safe limits and prevent cascading black-outs while staying in compliance with the SAIDI and SAIFI indices during maintenance and re-pair operations. Taking also under consideration the aging of the existing grid infrastructure, making it year by year more prone to failure, it is yet of great significance for the DNOs to have access to real-time feedback from grid’s infrastructure, fast, with low-cost upgrade interventions, easily deployed on the field and with fast response potential, in order to be able to perform real-time grid management (RTGM). In this article, we describe the architecture, development and deployment of a hybrid real-time control system of distributed generation (DG) units, which has the potential to be applied easily to DNO’s substations, RES plants and consumers (i.e. electric vehicles’ charging stations), that combines a low-cost minimum intervention into the electricity grid and its components and eliminates all communication interoperability problems between the different vendors’ installed electrical equipment.

The utilization of wind energy has become increasingly popular in the United States and many European countries due to its abundant natural source and optimized design. While existing wind turbines are predominantly large-scale and not suitable for standalone or distributed power production, Lubbock County in West Texas offers a diverse range of renewable energy options to meet its energy needs. The region relies heavily on utility-scale wind energy sources to supply power to the Texas Grid, replacing conventional fossil fuel-based systems. Currently, standalone solar PV systems are the preferred choice for renewable energy generation. However, West Texas possesses an ample supply of wind energy that can be harnessed to establish a microgrid and provide standalone power to rural communities. By employing the latest technology and optimizing efficiency, even in low-scale generation, a 6 kW permanent magnet alternator-based distributed wind turbine has been designed. This paper focuses on analyzing the techno-economic aspects of implementing this wind turbine in a real-world scenario, taking into account wind attributes such as velocity and available power at the specific location.

Since smart cities aim at becoming self-monitoring and self-response systems, their deployment relies on close resource monitoring through large-scale urban sensing. The subsequent gathering of massive amounts of data makes essential the development of event filtering mechanisms that enable the selection of what is relevant and trustworthy. Due to the rise of mobile event producers, location information has become a valuable filtering criterion as it not only offers extra information on the event described but also enhances trust on the producer. Implementing mechanisms that validate the quality of location information becomes then imperative. The lack of such strategies in cloud architectures compels the adoption of new communication schemes for IoT-based urban services. To serve the demand for location verification in urban event-based systems (DEBS), we have designed three different fog architectures that combine proximity and cloud communication. Moreover, we have successfully assessed their performance using network simulations with realistic urban traces.

In this paper, a distributed algorithm is proposed to solve a consensus convex optimization problem. It is a Jacobi-proximal alternating direction method of multipliers with a damping parameter $\gamma$ in the iteration of multiplier. Compared with existing algorithms, it has the following nice properties: (1) The restriction on proximal matrix is relaxed substantively, thus alleviating the weight of the proximal term. Therefore, the algorithm has a faster convergence speed. (2) The convergence analysis of the algorithm is established for any damping parameter $\gamma\in(0,2]$, which is larger ones in the literature. In addition, some numerical experiments and an application to a logistic regression problem are provided to validate the effectiveness and the characteristics of the proposed algorithm.

Recently, there has been a growing interest in distributed edge computing resource scheduling. For example, application scenarios such as intelligent traffic systems and Internet of Things(IoT) intelligent monitoring require the scheduling and migration of distributed resources. Distributed resource scheduling needs to consider the cost of resource scheduling, with the primary goal of finding the optimal strategy among various feasible solutions. There are different definitions for optimization objectives in different application scenarios, such as cost, transmission delay, energy consumption, etc. Current research mainly considers the optimization problem of local resource scheduling but needs more consideration of global resource scheduling. This paper defines a global resource scheduling problem for distributed edge computing and proves that the problem is NP-Hard. A heuristic solution strategy based on the Ant Colony Algorithm(ACO) was proposed, and Particle Swarm Optimization(PSO) was used to optimize the parameters of the ACO. Finally, an experimental comparative analysis was conducted to demonstrate that the algorithm proposed in this paper has good accuracy and iteration cost performance.

Photovoltaic (PV) generation is potentially uncertain. Probabilistic PV generation forecasting methods have been proposed with prediction intervals (PIs). However, several studies have dealt with geographically distributed PVs in a certain area. In this study, a two-step probabilistic forecast scheme is proposed for geographically distributed PV generation forecasting. Each step of the proposed scheme adopts ensemble forecasting based on three different machine-learning methods. In this case study, the proposed scheme was compared with conventional non-multistep forecasting. The proposed scheme improved the reliability of the PIs and deterministic PV forecasting results through 30 days of continuous operation with real data in Japan.

Modern agent-based models (ABM) and other simulation models require evaluation and testing of many different parameters. Managing that testing for large scale parameter sweeps (grid searches) as well as storing simulation data requires multiple, potentially customizable steps that may vary across simulations. Furthermore, parameter testing, processing, and analysis are slowed if simulation and processing jobs cannot be shared across teammates or computational resources. While high-performance computing (HPC) has become increasingly available, models can often be tested faster through the use of multiple computers and HPC resources. To address these issues, we created the Distributed Automated Parameter Testing (DAPT) Python package. By hosting parameters in an online (and often free) "database", multiple individuals can run parameter sets simultaneously in a distributed fashion, enabling ad hoc crowdsourcing of computational power. Combining this with a flexible, scriptable tool set, teams can evaluate models and assess their underlying hypotheses quickly. Here we describe DAPT and provide an example demonstrating its use.

The landscape of centralized cloud computing is now changing to distributed and decentralized clouds with promising impacts on energy consumption, resource availability, resilience, and customer experience. This research highlights the impacts of emerging IT trends, namely, 5G wireless technology, blockchain, and industrial Artificial Intelligence (AI) in development and realization of the next generation of cloud computing. Integration of these technologies in cyber-physical system and cloud manufacturing paradigms is explained and a unified edge-fog-cloud architecture is proposed for successful implementation in manufacturing systems.

Artificial general intelligence (AGI) progression metrics indicate AGI will occur within decades. No proof exists that AGI will benefit humans and not harm or eliminate humans. I propose a set of logically distinct conceptual components that are necessary and sufficient to 1) ensure various AGI scenarios will not harm humanity and 2) robustly align AGI and human values and goals. By systematically addressing pathways to malevolent AI we can induce the methods/axioms required to redress them. Distributed ledger technology (DLT, ‘blockchain’) is integral to this proposal, e.g. ‘smart contracts’ are necessary to address evolution of AI that will be too fast for human monitoring and intervention. The proposed axioms: 1) Access to technology by market license. 2) Transparent ethics embodied in DLT. 3) Morality encrypted via DLT. 4) Behavior control structure with values at roots. 5) Individual bar-code identification of critical components. 6) Configuration Item (from business continuity/disaster recovery planning). 7) Identity verification secured via DLT. 8) ‘Smart’ automated contracts based on DLT. 9) Decentralized applications - AI software modules encrypted via DLT. 10) Audit trail of component usage stored via DLT. 11) Social ostracism (denial of resources) augmented by DLT petitions. 12) Game theory and mechanism design.

Clustering is an important task in data mining that has become more challenging due to the ever-increasing size of available datasets. To cope with these big data scenarios, a high-performance clustering approach is required. Sparse grid clustering is a density-based clustering method that uses a sparse grid density estimation as its central building block. The underlying density estimation approach enables the detection of clusters with non-convex shapes and without a predetermined number of clusters. In this work, we introduce a new distributed and performance-portable variant of the sparse grid clustering algorithm that is suited for big data settings. Our compute kernels were implemented in OpenCL to enable portability across a wide range of architectures. For distributed environments, we added a manager-worker scheme that was implemented using MPI. In experiments on two supercomputers, Piz Daint and Hazel Hen, with up to 100 million data points in a 10-dimensional dataset, we show the performance and scalability of our approach. The dataset with 100 million data points was clustered in 1198s using 128 nodes of Piz Daint. This translates to an overall performance of 352TFLOPS. On the node-level, we provide results for two GPUs, Nvidia's Tesla P100 and the AMD FirePro W8100, and one processor-based platform that uses Intel Xeon E5-2680v3 processors. In these experiments, we achieved between 43% and 66% of the peak performance across all compute kernels and devices, demonstrating the performance portability of our approach.

Long-range radio transmissions open new sensor application fields, in particular for environment monitoring. As an example, the {\sl LoRa} radio protocol enables to connect remote sensors at distance as long as ten kilometers in line-of-sight. However, the large area covered also bring several difficulties, such as the placement of sensing devices in regard to geography topology, or the variability of communication latency. Sensing the environment also carries constraints related to the interest of sensing points in relation with a physical phenomenon. Criteria for designs are thus evolving a lot from the existing methods, especially in complex terrains. This article describes simulation techniques based on geography analysis to compute long-range radio coverages and radio characteristics in these situations. As radio propagation is just a particular case of physical phenomena, it is shown how a unified approach also allows to characterize the behavior of potential physical risks. The case of heavy rainfall and flooding is investigated. Geography analysis is achieved using segmentation tools to produce cellular systems which are in turn translated into code for high-performance computations. The paper provides results from practical complex terrain experiments using LoRa, that confirm the accuracy of the simulation, scheduling characteristics for sample networks, and performance tables for simulations on middle range Graphics Processing Units (GPUs).

Distributed Energy Resources might have a severe influence on Power Line Communications, as they can generate interfering signals and high frequency emissions or supraharmonics that may cause loss of metering and control data. In this paper, the influence of various energy resources on Narrowband Power Line Communications is described and analyzed through several test measurements performed in a real microgrid. Accordingly, the paper describes the effects on smart metering communications through MAC layer analysis. Results show that the commutation frequency of inverters and the presence of battery chargers are remarkable sources of disturbance in low voltage distribution networks. In this sense, the results presented can contribute to efforts towards standardization and normative of emissions at higher frequencies higher, such as CENELEC EN 50160 and IEC/TS 62749.

The paper proposes a traceability framework based on methodological approach for the deployment of IOTA-Based Distributed Ledger in the mining industry, as a first step of certification and labelling of the sustainable material production. The methodology is evaluated in real-world implementation in scope of the DIG_IT project. The implementation provides significant amount of heterogeneous data originating from different processes and sources during the operation in mines, such as vehicles operations, mining and raw material extraction, workers physical parameters, environmental parameters, sensors (field, biometric, assets), market (supply chains, commodity prices), weather data, etc. Most of these datasets, especially the data about the emission, needs integrity and the ability to be audited by the public community, government and the stakeholders. The methodology for establishing the transparency for the mining operations, the requirements, technical architecture, General Data Protection Regulation (GDPR) assessment, Distributed Ledger Technology (DLT) infrastructure, as well as end-to-end traceability, are proposed and evaluated with the actual deployment. The approach advocates end to end security for the increased traceability and data integrity based on Distributed Ledger Technology. Namely, W3C Decentralised Identities and Public Key Infrastructure (PKI) should be deployed from the data source to the cloud and anchored onto the Blockchain. The approach showed promising results with the regulations compliance made possible, making the data available and advertised publicly for the emission compliance.

In this study, Brillouin optical time-domain analysis (BOTDA) sensing technology was utilized for monitoring settlement in a similarity model of a highway subgrade. As contact winding cannot be used for an optical fiber that is buried directly in soil, uncoupling between. the fiber and the soil can occur. Thus, an optical-fiber-embedded beam (OFEB) was developed, and a method for measuring and calculating the beam deformation was proposed. A calibration test and a test on a similarity model of a subgrade were carried out to investigate the applicability and monitoring accuracy of the OFEB. It was concluded that the OFEB can accurately measure beam deflection, where the maximum relative error between measurements by the optical fiber and a displacement transducer was approximately 5%. The OFEB was embedded directly into a similarity model of a subgrade to monitor settlement. The deflection deformation of the OFEB was found to be close to the subgrade settlement over a certain settlement range with a relative error below 8.1%. Thus, the OFEB can be used to realize measure large-range distributed settlement in a subgrade. A numerical simulation was performed to identify appropriate beam dimensions and material design parameters, thereby extending the measurement range before decoupling of the OFEB and soil occurs. The enhancement of the measurement range and accuracy of the OFEB based on the preliminary experiments carried out in this study enables further investigation of settlement monitoring.

Distributed Manufacturing (DM) is becoming increasingly important in operations management due to its potential to support sustainability goals, reduce risks in global supply chains, and boost local economies. However, previous analyses of the advantages and disadvantages of DM have mainly focused on operations, overlooking additional benefits across the supply chain. For example, DM can enable local sourcing, better serve end-users, and tackle reverse supply chain challenges. While economies of scale are essential for reducing costs and improving productivity, highly centralised manufacturing can increase transportation costs, vulnerability, and supply chain disruptions, particularly during pandemics or other times of restricted transportation. To address these challenges, this study introduces a Multi-attribute Decision Support System (MADSS) and assessment process that considers impacts across the supply chain and guides stakeholders, academics, and decision-makers. The MADSS handles quantitative and qualitative information, missing data, and uncertainty, and a team of experts from academia and industry in New Zealand has developed the evaluation. The MADSS was used to analyse DM and traditional construction alternatives from economic, social, environmental, and resilience perspectives in New Zealand. The research contributes to a better understanding of the impacts of DM across the entire supply chain. Also, it proposes a flexible decision-making framework to engage with stakeholders and support decision-making in other industries and regions.

Autonomous driving systems are increasingly becoming a necessary trend towards building smart cities of the future. Numerous proposals have been presented in recent years to tackle particular aspects of the working pipeline towards creating a functional end-to-end system, such as object detection, tracking, path planning, sentiment or intent detection. Nevertheless, few efforts have been made to systematically compile all of these systems into a single proposal that effectively considers the real challenges these systems will have on the road, such as real-time computation, hardware capabilities, etc. This paper has reviewed various techniques towards proposing our own end-to-end autonomous vehicle system, considering the latest state on the art on computer vision, DSs, path planning, and parallelization.

A Digital Twin (DT) refers to a virtual representation or digital replica of a physical object, system, process, or entity. This concept involves creating a detailed, real-time digital counterpart that mimics the behavior, characteristics, and attributes of its physical counterpart. DTs have the potential to improve efficiency, reduce costs, and enhance decision-making by providing a detailed, real-time understanding of the physical systems they represent. While this technology is finding application in numerous fields, such as energy, healthcare, transportation, it appears to be a key component of the digital transformation of industries. In this paper, we present the research results achieved by IoTwins, a European research project aimed at investigating opportunities and issues of adopting DTs in the fields of industrial manufacturing and facility management. Particularly, we discuss a DT model and a reference architecture for use by the research community to implement a platform for the development and deployment of industrial DTs in the cloud continuum. Guided by the devised architectures’ principles, we implemented an open platform and a development methodology to help companies build DT-based industrial applications and deploy them in the so-called Edge/Cloud continuum. To prove the research value and the usability of the implemented platform, we discuss a simple yet practical development use case.

The recent advancements of the Semantic Web and Linked Data have changed the working of the traditional web. There is significant adoption of the Resource Description Framework (RDF) format for saving of web-based data. This massive adoption has paved the way for the development of various centralized and distributed RDF processing engines. These engines employ various mechanisms to implement critical components of the query processing engines such as data storage, indexing, language support, and query execution. All these components govern how queries are executed and can have a substantial effect on the query runtime. For example, the storage of RDF data in various ways significantly affects the data storage space required and the query runtime performance. The type of indexing approach used in RDF engines is critical for fast data lookup. The type of the underlying querying language (e.g., SPARQL or SQL) used for query execution is a crucial optimization component of the RDF storage solutions. Finally, query execution involving different join orders significantly affects the query response time. This paper provides a comprehensive review of centralized and distributed RDF engines in terms of storage, indexing, language support, and query execution.

The radial distribution networks are designed for unidirectional power flows and are passive in nature. However, with the penetration of Distributed Generation (DG), the power flow becomes bidirectional and the network becomes active. The integration of DGs into distribution network creates many issues with: system stability, protection coordination, power quality, islanding, proper placement and sizing etc. Among these issues, the two most significant are optimal sizing and placement of DGs and their protection coordination in utility network. The proper coordination of relays with high penetration of DGs placed at optimal location increases the availability and reliability of the network during abnormal operating conditions.This research addresses most of the available methods for efficient sizing and placement of DGs in distribution system (numerical, analytical and heuristic) as well as the developed protection coordination techniques for utility networks in the presence of DGs (Artificial Intelligence (AI), adaptive and non-adaptive, multi-agent, hybrid). This paper indicates the possible research gaps and highlights the applications possibilities and methods’ limitations in the area of DGs.

Rehabilitation from musculoskeletal injuries focuses on reestablishing and monitoring muscle activation patterns to accurately produce force. The aim of this study is to explore the use of a novel low-powered wearable distributed Simultaneous Musculoskeletal Assessment with Real-Time Ultrasound (SMART-US) device to predict force during an isometric squat task. Participants (N=5) performed maximum isometric squats under two medical imaging techniques; clinical musculoskeletal motion mode (m-mode) ultrasound on the dominant vastus lateralis and SMART-US sensors placed on the rectus femoris, vastus lateralis, medial hamstring, and vastus medialis. Ultrasound features were extracted, and a linear ridge regression model was used to predict ground reaction force. The performance of ultrasound features to predict measured force was tested using either the Clinical M-mode, SMART-US sensors on the vastus lateralis (SMART-US: VL), rectus femoris (SMART-US: RF), medial hamstring (SMART-US: MH), and vastus medialis (SMART-US: VMO) or utilized all four SMART-US sensors (Distributed SMART-US). Model training showed that the Clinical M-mode and the Distributed SMART-US model were both significantly different from the SMART-US: VL, SMART-US: MH, SMART-US:RF, and SMART-US:VMO models (p<0.05). Model validation showed that the Distributed SMART-US model had an R² of 0.80 ±0.04 and was significantly different from SMART-US: VL but not from the Clinical M-mode model. In conclusion, a novel wearable distributed SMART-US system can predict ground reaction force using machine learning, demonstrating the feasibility of wearable ultrasound imaging for ground reaction force estimation.

The development of a real-time chatbot using microservices architecture has been proposed as a solution to overcome the main challenges faced by single-service chatbots, namely limited scalability and performance. In this research, Agile Methodology is used as a development approach that allows the team to flexibly build and update each microservices service iteratively, according to the changing needs that occur. The results show that the implementation of microservices on a chatbot can result in faster responses to user requests, significantly improving system efficiency. The microservices architecture provides advantages in terms of modularity, where system components such as session management, business logic, and user interface can be organized and developed separately. This makes it possible to upgrade and improve certain parts without disrupting the entire system, as well as providing flexibility in customizing features and scaling services as needs evolve. Future research is expected to further explore the broader integration potential of this microservices system in chatbot applications, as well as evaluate the security and reliability aspects in a broader context of use.

In this paper, we propose and demonstrate a network analysis optical frequency domain reflectometer (NA-OFDR) for distributed temperature measurements at high spatial (down to 3 cm) and temperature resolution. The system makes use of a frequency-stepped, continuous-wave (cw) laser, whose output light is modulated using a vector network analyzer. The latter is also used to demodulate the amplitude of the beat signal obtained by coherently mixing the Rayleigh backscattered light with a local oscillator. The system is capable of high measurand resolution (50 mK at 3-cm spatial resolution), thanks to the high sensitivity of coherent Rayleigh scattering to temperature. Furthermore, compared to the conventional optical-frequency domain reflectometry (OFDR), the proposed system does not rely on the use of a tunable laser, therefore it is less prone to limitations related to the laser coherence or sweep nonlinearity. Two configurations are analyzed, both numerically and experimentally, based on either a double sideband or single sideband modulated probe light. The results confirm the validity of the proposed approach.

This study investigates the specific factors affecting the usage intention of distributed ledger technology (DLT), such as availability, diversity and economic value from the perspective of a unified theory of technology acceptance. Users of DLT in public and private sectors were surveyed. Availability and economic value affect performance expectancy, while availability, diversity, and profitability have an influence on effort expectancy. Performance expectancy and transparency have a positive effect on the intention to use DLT which in turn exerts a positive effect on usage behavior. This study provides implications for researchers in that it attempts to investigate the factors affecting the usage intention of DLT based on the extended unified theory of acceptance and encompassing diverse industries that adopt DLT, such as the public, financial, medial, and logistics sectors.

As various services have been generating large scale graphs to represent multiple relationships between objects, studies have been conducted to obtain subgraphs with particular patterns. In this paper, we propose a distributed query processing method to efficiently search a subgraph for a large graph on Spark. To reduce unnecessary processing costs, the search order is determined by filtering scores using the probability distribution. The partitioned queries are searched in parallel in the distributed graph of each slave node according to the search order, and the local search results obtained from each slave node are combined and returned. The query is partitioned in triplets based on the determined search order. The performance of the proposed method is compared with the performance of existing methods to demonstrate its superiority.

In recent years, Cloud Computing and Big Data have been considered the most attractive areas that are revolutionizing the IT world. Cloud Computing paradigm has recently appeared that allows running proprietary or difficult portable applications outside their original software environment on one or more virtual hardware platforms. Therefore, we are to developing such techniques which make it possible to secure communication between the communicating Cloud entities. These techniques must take into account several factors due to the data transmitted in this type of environment is proprietary and of significant size. Conventional data security techniques are not suitable for today's cloud usage. Hence, the main research of this thesis is to define an adaptable architecture with the aim to propose a scalable system that supports cloud services. We will define feasible security solutions dedicated to the Cloud computing context in order to robustly protect data stored in the Cloud. We are more precisely looking for working on NoSQL databases. We also intend to propose a secure solution based on the blockchain that has powerful features like decentralization, autonomy, security, reliability, and transparency.

By combining stochastic variational inference with message passing algorithms we show how to solve the highly complex problem of navigation and avoidance in distributed multi-robot systems in a computationally tractable manner, allowing online implementation. Subsequently, the proposed variational method lends itself to more flexible solutions than prior methodologies. Furthermore, the derived method is verified both through simulations with multiple mobile robots and a real world experiment with two mobile robots. In both cases the robots shares the operating space and needs to cross each other’s paths multiple times without colliding.

A microwave-photonics method has been developed for measuring distributed acoustic signals. This method uses microwave-modulated low coherence light as a probe to interrogate distributed in-fiber interferometers, which are used to measure acoustic-induced strain. By sweeping the microwave frequency at a constant rate, the acoustic signals are encoded into the complex microwave spectrum. The microwave spectrum is transformed into the joint time-frequency domain and further processed to obtain the distributed acoustic signals. The method is first evaluated using an intrinsic Fabry Perot interferometer (IFPI). Acoustic signals of frequency up to 15.6 kHz were detected. The method was further demonstrated using an array of in-fiber weak reflectors and an external Michelson interferometer. Two piezo-ceramic cylinders (PCCs) driven at frequencies of 1700 Hz and 3430 Hz were used as acoustic sources. The experiment results show that the sensing system can locate multiple acoustic sources. The system resolves 20 nε when the spatial resolution is 5 cm. The recovered acoustic signals match the excitation signals in frequency, amplitude, and phase, indicating an excellent potential for distributed acoustic sensing (DAS).

The incorporation of renewable energy into power systems poses serious challenges to the transmission and distribution power system operators (TSOs and DSOs). To fully leverage these resources there is a need for a new market design with improved coordination between TSOs and DSOs. In this paper we propose two coordination schemes between TSOs and DSOs: one centralised and another decentralised that facilitate the integration of distributed based generation; minimise operational cost; relieve congestion; and promote a sustainable system. To this end, we approximate the power equations with linearised equations so that the resulting optimal power flows (OPFs) in both the TSO and DSO become convex optimisation problems. In the resulting decentralised scheme, the TSO and DSO collaborate to optimally allocate all resources in the system. In particular, we propose an iterative bi-level optimisation technique where the upper level is the TSO that solves its own OPF and determines the locational marginal prices at substations. We demonstrate numerically that the algorithm converges to a near optimal solution. We study the interaction of TSOs and DSOs and the existence of any conflicting objectives with the centralised scheme. More specifically, we approximate the Pareto front of the multi-objective optimal power flow problem where the entire system, i.e., transmission and distribution systems, is modelled. The proposed ideas are illustrated through a five bus transmission system connected with distribution systems, represented by the IEEE 33 and 69 bus feeders.

In the field of machine learning, cluster analysis has always been a very important technology for determining useful or implicit characteristics in the data. However, the current mainstream cluster analysis algorithms require comprehensive analysis of the overall data to obtain the best parameters in the algorithm. As a result, handling large-scale datasets would be difficult. This research proposes a distributed related clustering mechanism for Unsupervised Learning, which assumes that if adjacent data are similar, a group can be formed by relating to more data points. Therefore, when processing data, large-scale datasets can be distributed to multiple computers, and the correlation of any two datasets in each computer can be calculated simultaneously. Later, results are processed through aggregation and filtering before assembled into groups. This method would greatly reduce the pre-processing and execution time of the dataset; in practical application, it only needs to focus on how the relevance of the data is designed. In addition, the experimental results show the accuracy, applicability, and ease of use of this method.

Distributed digital manufacturing offers a solution to medical supply and technology shortages during pandemics. To prepare for the next pandemic, this study reviews the state-of-the-art for open hardware designs needed in a COVID-19-like pandemic. It evaluates the readiness of the top twenty technologies requested by the Government of India. The results show that the majority of the actual medical products have had some open source development, however, only 15% of the supporting technologies that make the open source device possible are freely available. The results show there is still considerable work needed to provide open source paths for the development of all the medical hardware needed during pandemics. Five core areas of future work are discussed that include: i) technical development of a wide-range of open source solutions for all medical supplies and devices, ii) policies that protect the productivity of laboratories, makerspaces and fabrication facilities during a pandemic, as well as iii) streamlining the regulatory process, iv) developing Good-Samaritan laws to protect makers and designers of open medical hardware, as well as to compel those with knowledge that will save lives to share it, and v) requiring all citizen-funded research to be released with free and open source licenses.

This review paper deals with recently proposed algorithms for distributed blind macro-calibration of sensor networks based on consensus (synchronization), not requiring any fusion center. The basic algorithm, performing the estimation of the local calibration parameters, is derived commencing from appropriate local criteria, and developing the corresponding gradient descent scheme. It is shown that the estimated parameters of the calibration functions asymptotically converge, in the mean-square sense and with probability one (w.p.1), to such values that ensure consensus on calibrated sensor gains and calibrated sensor offsets. For the more realistic case in which additive measurement noise, communication dropouts and additive communication noise are present, two algorithm modifications are introduced: one using a simple compensation term, and a more robust one based on an instrumental variable. By utilizing stochastic approximation arguments it is shown that the modified algorithms also achieve asymptotic agreement for calibrated sensor gains and offsets, in the mean-square sense and w.p.1. Convergence rate is analyzed in terms of an upper bound of the mean-square error. It is also shown that the communications between nodes can be completely asynchronous, which is of substantial importance for real-world applications. Suggestions for design of \textit{a priori} adjustable weights are given. Finally, it is shown that, if there is a subset of (precalibrated) reference sensors with fixed calibration parameters, the calibrated sensor gains and offsets of the rest of the sensors do not achieve consensus - they converge to different points dictated by the reference sensors and the network characteristics. Wide applicability and efficacy of these algorithms are illustrated on several simulation examples.

The utilization of Fiber Bragg Grating (FBG) sensors in innovative optical sensor networks has displayed remarkable potential in providing precise and dependable thermal measurements in hostile environments on Earth. Multi-Layer Insulation (MLI) blankets serve as critical components of spacecraft and are employed to regulate the temperature of sensitive components by reflecting or absorbing thermal radiation. To enable accurate and continuous monitoring of temperature along the length of the insulative barrier without compromising its flexibility and lightweight, FBG sensors can be embedded within the thermal blanket, thereby enabling distributed temperature sensing. This capability can aid in optimizing the thermal regulation of the spacecraft and ensuring the reliable and safe operation of vital components. Furthermore, FBG sensors offer several advantages over traditional temperature sensors, including high sensitivity, immunity to electromagnetic interference, and the ability to operate in harsh environments. These properties make FBG sensors an excellent option for thermal blankets in space applications, where precise temperature regulation is crucial for mission success. Nevertheless, the calibration of temperature sensors in vacuum conditions poses a significant challenge due to the lack of an appropriate calibration reference. Therefore, this paper aims to investigate innovative solutions for calibrating temperature sensors in vacuum conditions. The proposed solutions have the potential to enhance the accuracy and reliability of temperature measurements in space applications, which can enable engineers to develop more resilient and dependable spacecraft systems.

Financial time series and other human-driven, non-natural processes are known to exhibit fat-tailed outcome distributions. That is, such processes demonstrate a greater tendency for extreme outcomes than the normal distribution or other natural distributional processes would predict. We examine the mathematical expectation, or simply "expectation," traditionally the probability-weighted outcome, regarded since the seventeenth century as the mathematical definition of "expectation." However, when considering the "expectation" of an individual confronted with a finite sequence of outcomes, particularly existential outcomes (e.g., a trader with a limited time to perform or lose his position in a trading operation), we find this individual "expects" the median terminal outcome over those finite trials, with the classical seventeenth-century definition being the asymptotic limit as trials increase to this. Since such finite-sequence "expectations" often differ in values from the classic one, so do the optimal allocations (e.g., growth-optimal). We examine these for fat-tailed distributions. The focus is on implementation, and the techniques described can be applied to all distributional forms.

The evolution of some epidemics, as influenza, shows common patterns both in different regions and from year to year. On the contrary, epidemics like the novel COVID-19 show quite heterogeneous dynamics and are extremely susceptible to the measures taken to mitigate their spread. In this paper we propose empirical dynamic modeling to predict the evolution of influenza in Spain’s regions. It is a non-parametric method that looks into the past for coincidences with the present to make the forecasts. Here we extend the method to predict the evolution of other epidemics at any other starting territory and we test also this procedure with Spanish COVID-19 data. We finally build influenza and COVID-19 networks to check possible coincidences in the geographical distribution of both diseases. With this, we grasp the uniqueness of the geographical dynamics of COVID-19.

The world of query-response systems heavily depends on the cloud storage solutions, distributed data transfers and locality of users etc. When data stores and users are distributed geographically, it is essential to organize distributed data cache points at ideal locations to minimize data transfers. This leads to the question, what data to cache in which location. To answer this, we are developing an adaptive distributed data caching framework that can identify suitable data chunks to cache and move across a network of community cache locations. This paper details the first step of the process: the sub-query fragmentation technique to fragment data into portable objects. Evaluation suggests that sub-query fragments enable distributed learning methods to understand query patterns and association between sub-queries. The sub-query objects can be modelled easily as input dataset to implement machine learning models to assist cache maintenance.

Biological systems have a unique ability inherited through their genome. It allows them to build, operate, and manage a society of cells with complex organizational structures where autonomous components execute specific tasks and collaborate in groups to fulfill systemic goals with shared knowledge. The system receives information from various senses, makes sense of what is being observed, and acts using its experience, while the observations are still in progress. We use the General Theory of Information (GTI) to implement a digital genome, specifying the operational processes that design, deploy, operate, and manage a cloud-agnostic distributed application that is independent of IaaS and PaaS infrastructure, which provides the resources required to execute the software components. The digital genome specifies the functional and non-functional requirements that define the goals and best-practice policies to evolve the system using associative memory and event-driven interaction history to maintain stability and safety while achieving the system’s objectives. We demonstrate a structural machine, cognizing oracles, and knowledge structures derived from GTI used for designing, deploying, operating, and managing a distributed video streaming application with autopoietic self-regulation that maintains structural stability and communication among distributed components with shared knowledge while maintaining expected behaviors dictated by functional requirements.

The widespread availability of tools to collect and share spatial data enables us to produce a large amount of geographic information on a daily basis. This enormous production of spatial data requires scalable data management systems. Geospatial architectures have changed from clusters to cloud architectures and more parallel and distributed processing platforms to be able to tackle these challenges. Peer-to-peer (P2P) systems as a backbone of distributed systems have been established in several application areas such as web3, blockchains, and crypto-currencies. Unlike centralized systems, data storage in P2P networks is distributed across network nodes, providing scalability and no single point of failure. However, managing and processing queries on these networks has always been challenging. In this work, we propose a spatio-temporal indexing data structure, DSTree. DSTree does not require additional Distributed Hash Trees (DHT) to perform multi-dimensional range queries. Inserting a piece of new geographic information updates only a portion of the tree structure and does not impact the entire graph of the data. For example, for time-series data, such as storing sensor data, the DSTree performs better. Despite the advantages of our proposed framework, challenges remain. We conclude that more significant research effort from GIScience and related fields in developing decentralized applications is needed. The need for the standardization of different geographic information when sharing data on the IPFS network is one of the requirements.

VANET networks are a class of peer-to-peer wireless networks that are used to organize communication between cars (V2V), cars and infrastructure (V2I) and between cars and other types of nodes (V2X). These networks are based on the DSRC, 802.11 standards and are mainly intended for organizing the exchange of various types of messages, mainly emergency ones, to prevent road accidents or alert when road accident occur, or control the priority of the driveway. Initially it was assumed that cars would only interact with each other, but later, with the advent of the concept of Internet of things (IoT). Researchers began to analyze connectivity with other devices, which in general will allow to combine various road users and other devices that can used in the creation of intelligent transport infrastructure in a single smart city management system. Infrastructure is necessary for the provision of services, monitoring and management of the VANET network. As infrastructure objects it is proposed to use stationary objects of Roadside unit (RSU). The aim of this paper is to analyze the use of mobile edge computing to decrease the load to the base station and latency between RSU clouds and provide a real experiment using software defined networking and mobile edge computing for RSU.