In this paper, thin plate theory and moderately thick plate theory are proposed for analyzing the bending problem of rectangular plates with stepped thickness resting on elastic half-space foundation. The ground reaction is considered as an unknown coefficient and the hypothesis of Winkler foundation model and two-parameter ground model is eliminated in this method, so as to obtain the law of internal force distribution of the plate and the distribution law of contact reaction force between the stepped rectangular plate and foundation. The stepped rectangular plate is divided into upper and lower plates, and thin plate theory and moderately thick plate theory are used to obtain the analytical solution. The obtained analytical solutions in this paper are compared with results reported in other publications to verify the accuracy of this method. The effects of the elastic modulus and dimensions of the plate, and theory of plate are also considered. The analytical solutions show that it is feasible to decompose the stepped rectangular plate into two plates for analyzing the bending properties of stepped rectangular plate, and this method provide a reference for the study of multilayer stepped rectangular plates.

New or in-service truss bridges, with or without upper bracing systems, may display instability phenomena such as general lateral torsional buckling of the upper chord. The buckling of structural elements, particularly in the case of steel bridges, can be associated with the risk of collapse or temporary/permanent withdrawal from service. Buckling poses a significant danger as it often occurs at lower load values compared to those considered during the design phase. Additionally, this phenomenon can manifest suddenly, without prior warning, rendering intervention for its prevention impossible or futile. In contemporary times, most research and design calculation software offer the capability to establish preliminary values for buckling loads, even for highly intricate structures. This is typically achieved through linear eigenvalue buckling analyses, often followed by significantly more complex large displacement nonlinear analyses. However, interpreting the results for complex bridge structures can be challenging, and their accuracy is difficult to ascertain. Consequently, the objective of this paper is to introduce an original method for a more straightforward estimation of the buckling load of the upper chord in steel truss bridges. The method utilizes the theory of beams on an elastic foundation. The buckling load of the upper chord was determined using both the finite element method and the proposed methodology, yielding highly consistent results.

The International Agency for Research on Cancer (IARC) evaluates “very hot (>65 °C) beverages” as probably carcinogenic to humans. However, there is a lack of research regarding what temperatures consumers actually perceive as “very hot” or as “too hot”. A methodology for organoleptical assessment of such threshold temperatures was developed. The participants were asked to mix a very hot coffee step by step into a cooler coffee. Because of that, the coffee to be tasted was incrementally getting hotter during the test. The participants took a sip at every addition, until they perceive the beverage as too hot for consumption. The protocol was evaluated using 87 participants. Interestingly, the average pain threshold of the test group (67 °C) and the preferred drinking temperature (63 °C) iterated around the IARC threshold for carcinogenicity. The developed methodology was found as fit for the purpose and may be applied in larger studies.

Very hot (> 65 °C) beverages such as espresso were evaluated by the International Agency for Research on Cancer (IARC) as probably carcinogenic to humans. For this reason, research into lowering beverage temperature without compromising its quality or taste is important. For espresso, one obvious possibility consists in lowering the brewing temperature. In two sensory trials using ISO 4120:2004 triangle test methodology, brewing temperatures of 80°C vs. 128°C and 80° vs. 93°C were compared. From the tested levels, espresso brewed at the lowest temperature had the highest acceptance. However, most tasters were unable to distinguish between 80°C and 93°C. The results of these pilot experiments proof the possibility to decrease the health hazard of very hot beverages by lower brewing temperatures.

Artificial Intelligence (AI) is rapidly transforming the field of medicine, announcing a new era of innovation and efficiency. Among AI programs designed for general use ChatGPT holds a prom-inent position using an innovative language model developed by OpenAI. Thanks to the use of deep learning techniques, ChatGPT stands out as an exceptionally viable tool, renowned for gen-erating human-like responses to queries. Various medical specialties, including rheumatology, oncology, psychiatry, internal medicine, and ophthalmology, have been explored for ChatGPT in-tegration, with pilot studies and trials revealing each field's potential benefits and challenges. However, the field of genetics and genetic counseling, as well as that of rare disorders, represents an area suitable for exploration, with its complex data sets and the need for personalized patient care. In this review, we synthesize the wide range of potential applications for ChatGPT in the medical field, highlighting its benefits and limitations. We pay special attention to rare and genetic disorders, aiming to shed light on the future roles of AI-driven chatbots in healthcare. Our goal is to pave the way for a healthcare system that is more knowledgeable, efficient, and centered around patient needs.

Virtual reality (VR) can play a key role in automotive marketing research, lowering costs and shortening the time it takes to bring a new product to market. However, there are still few VR applications that support automotive customers' experiences during the early stages of product development. Through a systematic review of literature and patents, this study aims to identify the challenges and opportunities for the application of virtual reality in car clinics, and to categorize them into attributes. We searched through the knowledge databases of PatentScout, ScienceDirect, Springer, and IEEEXplore. We found 72 patents with a high concentration in a few inventors. The United States of America presented the greatest number of records and the most common applications related to the apparatus for automatically reading respondents' reactions in a virtual environment. In terms of articles, we found 19 research papers that discussed sixteen categories identified as challenges and opportunities for automotive marketing research: 1) cost, 2) location to customers, 3) flexibility in interactions, 4) model transportation, 5) depth perception, 6) haptic perception, 7) motion, 8) movement perception/ physical collision, 9) color and texture, 10) sound feedback, 11) product interaction/manipulation, 12) visual-spatial, 13) graphic quality, 14) intuitiveness, 15) cybersecurity and 16) cybersickness. We conclude that the automotive industry can employ virtual reality for marketing research, but relevant elements such as hardware and software definition, stimulus quality, and research objectives, among others, must be considered.

Healthcare professionals constantly face situations that reflect ecosystems’ degradation. These can negatively affect their mental health. Research suggests that hope and resilience can play an important role in this scenario, since they are related to/predict mental health in highly heterogeneous samples (considering geography, age, profession, health, etc.). In this context, the aims of the present study are: to characterize and explore the relationship between hope, resilient coping and mental health of Portuguese healthcare professionals. Using Google Forms, 276 healthcare professionals answered to the GHQ-28, the (adult) Trait Hope Scale, and the Brief Resilient Coping Scale (cross-sectional study). The minimum and maximum possible scores were reached, with the exception of the maximum score of GHQ-28-Total. Regarding Hope, 19.6% scored below the midpoint (M=43.46, SD=11.97); 29.3% revealed low resilience (M=14.93, SD=4.05); and the average of 4 of the 5 Mental Health scores (exception: Severe Depression) indicates the probability of a psychiatric case. Hope correlated with Social Dysfunction and GHQ-28-Total; resilient coping proved to be a (weak) predictor of 4 of the 5 GHQ-28 indicators (exception: Severe depression). The results support the need to promote the sample's mental health, hope and resilient coping. They also suggest that stimulating resilient coping may contribute to improving healthcare professionals’ mental health.

The prevalence of hepatitis B and delta viruses (HBV/HDV) among people who use drugs (PWUD) remains largely unknown. In the context of one Philadelphia-based harm reduction organization (HRO), this study aimed to assess HBV/HDV prevalence and facilitate linkage to care. Participants completed a demographic HBV/HDV risk factor survey and were screened for HBV and reflexively for HDV if positive for HBV surface antigen or isolated core antibody. Fisher’s exact tests and regression were used to understand relationships between risks and HBV blood markers. Of the 498 participants, 126 (25.3%) were susceptible to HBV, 52.6% had been vaccinated against HBV, and 17.9% had recovered from a past infection. Eleven (2.2%) participants tested positive for isolated HBV core antibody, 10 (2.0%) for HBV surface antigen, and one (0.2%) for HDV antibody. History of incarceration was associated with current HBV infection, while transactional sex and experience of homelessness were predictive of previous exposure. This study found high rates of current and past HBV infection, and a 10% HBV/HDV co-infection rate. Despite availability of vaccine, one quarter of participants remained vulnerable to infection. Findings demonstrate the need to improve low-threshold HBV/HDV screening, vaccination, and linkage to care among PWUD. The study also identified gaps in the HBV/HDV care cascade, including lack of point-of-care diagnostics and lack of support for HROs to provide HBV services.

Multivariate statistical approaches (MSA), such as principal components analysis and multidimensional scaling, seek to uncover meaningful patterns within datasets by considering multiple response variables in a concerted fashion. Although these techniques are readily used by ecologists to visualize and explain differences between study sites, they could theoretically be employed to differentiate organisms within an experimental framework while simultaneously identifying response variables that drive documented experimental differences. Therefore, MSA were used herein to attempt to understand the response of the common, Indo-Pacific reef coral Seriatopora hystrix to temperature changes using data from laboratory-based temperature challenge studies performed in Southern Taiwan. Gene expression and physiological data partitioned experimental specimens by time of sampling, treatment temperature, and site of origin upon employing MSA, signifying that S. hystrix and its dinoflagellate endosymbionts display physiological and molecular signatures that are characteristic of sampling time, site of colony origin, and/or temperature regime. These findings promote the utility of MSA for documenting biologically meaningful shifts in the physiological and/or sub-cellular response of marine invertebrates exposed to environmental change.

Cardiovascular disease (CVD) is the leading cause of death worldwide. Cardiac rehabilitation (CR) has proven to be effective in reducing the rate of recurrence and disease as secondary prevention (evidence-based intervention) in patients who have suffered from myocardial infarction (MI). CR is a multidisciplinary path in which the patient is followed pharmacologically, from a psychological, nutritional, nursing and physiotherapy point of view. Post-MI patients present a reduction in the performance of the diaphragm muscle, the main inspiratory muscle, and this condition can become a risk factor for further relapses or for the onset of heart failure. Despite the solidity of the international guidelines for CR, the latter are lacking in specifically indicating an evaluation and training path regarding the inspiratory muscles in post-MI patients who have not undergone cardiac surgery. The article reviews the information on the adaptation of the diaphragm post-MI and highlights the need for clearer indications for a rehabilitation process that gives importance to the diaphragm.

In steel structures, oblique thin steel plates serve as panel zones in structures spanning large spaces (e.g., warehouses and gymnasiums). Considerable research has been conducted on the shear buckling of panels due to seismic loads acting on a structure. Conversely, under snow or wind loads, the panel zone may experience compressive and tensile stresses simultaneously from two directions. Considering the economic preference for thin steel plates, evaluating the elastic critical local buckling stresses in the panel zone under biaxial normal stress may provide essential information to structural engineers. In this study, an elastic buckling analysis based on the energy method is performed to clarify the impact of panel geometry and boundary conditions on the elastic local buckling stresses of oblique panel zones. As confirmed, the buckling stresses derived from the energy method could simulate the local buckling stresses with accuracy comparable to that of finite element analysis, and an engineer-friendly design formula was proposed. Finally, we determined the correlation of the buckling stresses under biaxial stresses and presented a method for evaluating this correlation. Engineers can utilize the provided design equations to more efficiently and accurately calculate buckling loads, facilitating safer and more economical design of structures with oblique plates.

The most important plastic resins used for wire coating are Polyvinyl Chloride (PVC), Nylon, Polysulfone and Low-high density polyethylene (LDPE / HDPE). In this article,the coating process is performed using elastic-viscous fluid as a coating material for wire coating in a pressure type coating die. The elastic-viscous fluid is electrically conducted in the presence of an applied magnetic field. The governing non-linear equations are modeled and then solved analytically by utilizing an Adomian decomposition method (ADM). The convergence of the series solution is established. The results are also verified by Optimal Homotopy Asymptotic Method (OHAM). The effect of different emerging parameters such as non-Newtonian parameters α and β, magnetic parameter M and the Brinkman number Br on solutions (velocity and temperature profiles) are discussed through several graphs. Additionally, the current result also compares with the published work already available in the literature.

The efficacy of the product development process is measured by the ability to launch a project with product and production process specifications that could guarantee that the manufacturing can produce it with the least impact. If a problem is detected late, they bring consequences beyond the high cost of the solution, if related to physical ergonomics, which will influence the well-being of operators, productivity, and quality. Virtual Reality (VR) and Digital Human Modeling (DHM) are ones of the enabling technologies of Industry 4.0 and has already been applied on a large scale in industries such as automotive, construction, and aeronautics. However, even though the huge applications, these technologies are not yet applied by these industries for the analysis of physical ergonomics during product development phases. This study aims to characterize the state of the art and technology about the application of Virtual Reality and Digital Human Modeling for the physical ergonomics analysis in the during product development phases in the industry through a systematic review of the literature and patents. In patent documents recovery, we used Derwent Innovation database. The research is based on searching the selected terms in the title, summary, and claims of the documents through a search strategy containing IPC code and keywords. In articles recovery, we searched ScienceDirect, Springer, and IEEExplore databases for scientific publications. The search resulted in 311 patents documents and 16 articles in the scientific database. This study analyzed the patents to map out the technological progress in this area, where we found in the charts and data an increasing number of publications per year and a spread application with a considerable number of new technologies presented in these recent patents. The literature review indicated that Virtual Reality technology complements the Digital Human Modeling during physical ergonomics analysis for manufacturing process already designed. The majority of research on the use of VR and DHM technologies for physical ergonomics analysis focus on the automotive industry and the ergonomic assessment of workstations and current processes. Further research is needed to investigate how Virtual Reality and Digital Human Modeling might assist in the understanding of physical ergonomics in certain tasks throughout the product development process, such as the simulation of worker posture or effort when assembling parts.

Understanding the dynamics of Organic Carbon mineralization is fundamental in forecasting biosphere to atmosphere Net Carbon Ecosystem Exchange (NEE). With this perspective, we developed 3D-CMCC-PSM, a new version of the hybrid Process Based Model 3D‐CMCC FEM where also heterotrophic respiration (R_h) is explicitly simulated. The aim was to quantify NEE as a forward problem, by subtracting Ecosystem Respiration (R_eco) to Gross Primary Productivity (GPP). To do so, we developed a simplification of the Soil Carbon dynamics routine proposed in DNDC [1]. The method calculates decomposition as a function of soil moisture, temperature, state of the organic compartments, and relative abundance of microbial pools. Given the pulse dynamics of soil respiration, we introduced modifications in some of the principal constitutive relations involved in phenology and littering sub-routines. We quantified the model structure related uncertainty in NEE, by running our training simulations over 1000 random parameter-sets extracted from parameters distributions expected from literature. 3D-CMCC-PSM predictability was tested on independent time series for 6 Fluxnet sites. The model resulted in daily and monthly estimations highly consistent with the observed time series. It showed lower predictability in Mediterranean ecosystems, suggesting that it may need further improvements in addressing evapotranspiration and water dynamics.

In the recent years, tubular nanostructures have been related with immense advances in various fields of science and technology. Considerable research efforts have been centered on the theoretical prediction and manufacturing of non-carbon nanotubes (NTs), which meet modern requirements for the developing of novel devices and systems. In this context, diatomic inorganic nanotubes formed by atoms of elements from the 13th group of the periodic table (B, Al, Ga, In, Tl) and nitrogen (N), have received much research attention. In the present work, the elastic properties of single-walled boron nitride, aluminium nitride, gallium nitride, indium nitride and thallium nitride nanotubes were numerically evaluated using the nanoscale continuum modelling approach (also called molecular structural mechanics). The elastic properties (rigidities, surface Young´s and shear moduli, and Poisson´s ratio) of nitride nanotubes are discussed with respect to the bond length of the corresponding diatomic hexagonal lattice. The results obtained contribute to a better understanding of the mechanical response of nitride compound-based nanotubes, covering a broad range from the well-studied boron nitride NTs to the hypothetical thallium nitride NTs.

Abstract: Canine ehrlichiosis is a zoonotic disease transmitted by ticks, posing a formidable challenge to both veterinary and public health sectors worldwide. Across continents and regions, the prevalence rates of Ehrlichia canis exhibit significant variation, underlining the necessity for a nuanced and globally informed approach to understanding and combating this disease. The review navigates through this complexity, shedding light on the intricate pathogenesis of the illness. Central to this understanding is the bacterium's adept manipulation of the host's immune response, contributing to the diverse clinical manifestations observed in infected animals. Diagnostic methodologies, crucial for timely intervention and management, are subjected to critical assessment. From traditional microscopy to modern molecular techniques and serology, each approach is scrutinized for its strengths and limitations. By acknowledging these nuances, the review aims to equip practitioners with the knowledge necessary to make informed diagnostic decisions. A central tenet of this review is the advocacy for an integrated "One Health" approach. By leveraging advancements in genomics, proteomics, and artificial intelligence, there is a potential to enhance diagnostic accuracy and develop innovative therapeutic and preventive strategies globally. This collaborative approach recognizes the interconnectedness of human, animal, and environmental health, offering a holistic framework for tackling complex zoonotic diseases like canine ehrlichiosis. In conclusion, this review serves as a beacon of knowledge, illuminating the multifaceted landscape of canine ehrlichiosis. Through its synthesis of scientific literature and emphasis on methodological rigor, it provides a foundation upon which future research and interventions can be built. With a unified commitment to "One Health" principles and the integration of cutting-edge technologies, there exists the potential to mitigate the impact of this disease and safeguard both animal and human well-being worldwide

Machine learning is an established and frequently used technique in industry and academia but a standard process model to improve success and efficiency of machine learning applications is still missing. Project organizations and machine learning practitioners have a need for guidance throughout the life cycle of a machine learning application to meet business expectations. We therefore propose a process model for the development of machine learning applications, that covers six phases from defining the scope to maintaining the deployed machine learning application. The first phase combines business and data understanding as data availability oftentimes affects the feasibility of the project. The sixth phase covers state-of-the-art approaches for monitoring and maintenance of a machine learning applications, as the risk of model degradation in a changing environment is eminent. With each task of the process, we propose quality assurance methodology that is suitable to address challenges in machine learning development that we identify in form of risks. The methodology is drawn from practical experience and scientific literature and has proven to be general and stable. The process model expands on CRISP-DM, a data mining process model that enjoys strong industry support but lacks to address machine learning specific tasks. Our work proposes an industry and application neutral process model tailored for machine learning applications with focus on technical tasks for quality assurance.

This paper revisits a classic problem in physics - Hertz elastic dynamics of two colliding elastic spheres. This study obtains impact period in terms of hypergeometric function and successfully combines Deresiewicz's three segmental solutions into one single solution. Our numerical investigation confirms that Deresiewicz's inversion is a good approximation. As an essential part of this study, a general Maple code is provided.

Medical data flows in streams as the data related to clinical tests and administered drugs by the doctors flows continuously. The doctors must be immediately alerted if negative associations are found among the drugs they prescribe. Data streams are to be processed in single scans as it is not possible to re-scan the data for any iterative processing. To detect negative drug connections, regular and frequent drug patterns must be processed. Negative correlations between disease-curing medications might create adverse responses that kill patients. This paper proposes an algorithm that finds the negative associations among regular and frequent patterns mined from medical data streams. The negative associations mined are the most effective and reduce the negative associations, which are more critical by 50%.

The prevailing interpretations of physics are based on deeply entrenched assumptions, rooted in classical mechanics. Logical implications include: the denial of entropy as a fundamental physical property, and the inability to explain irreversible change, random quantum measurements, or nonlocality without untestable and implausible metaphysical implications. We propose a conceptual model that is based on empirically justifiable assumptions and consistent with observations. The WYSIWYG Conceptual Model (WCM) assumes no hidden properties: “What You can See Is What You Get.” The WCM contextually defines a system’s state with respect to its actual ambient background, and it extends existing models of physical reality by defining entropy and exergy as objective contextual properties of state. The WCM establishes the irreversible dissipation of exergy and the Second law of thermodynamics as a fundamental law of physics, it recognizes physical randomness, and it provides a physical explanation for nonlocality, consistent with Special Relativity, without hidden variables, superdeterminism, or “spooky action.”

The microbial contamination in food packaging have been a major concern that paved the way for the search for natural based new anti-microbial agents, such as modified α-mangostin. In the present work, twelve synthetic analogs were obtained via semi-synthetic modification of α-mangostin by Ritter reaction, reduction by palladium-carbon (Pd-C), alkylation, and acetylation. The evaluation of the anti-microbial potential of the synthetic analogs showed higher therapeutic value than the parent molecule. The anti-microbial studies proved that I E showed higher antibacterial activity whereas I I showed most significant antifungal activity. Due to their microbial properties, modified α-mangostin can be utilized as active anti-microbial agents in food packaging.

Abstract: Doppler renal resistive index (RRI) has been used for several decades as a potential indi-cator for renal disease and progression. In recent years, RRI has emerged as a useful prognostic indicator for a range of co-morbidities in patients who are acutely unwell and as a potential marker for sub-clinical acute kidney injury (AKI) and post procedural AKI risk. Despite this, the clinical and theoretical determinants of RRI are poorly understood and remain contentious. Method: A narrative review of studies exploring the theoretical, experimental, and clinical evidence for factors affecting RRI. No date restrictions were set. Findings: Both experimental and clinical data confirm that RRI is markedly affected by a range of systemic and renal determinants and is influenced closely by the underlying risk factors and sys-temic vascular changes that lead to progressive renal damage. Discussion: This paper provides an overview of the key haemodynamic determinants of renal re-sistive index and aims to clarify their relative importance. With reference to a simplified theoretical model, evidence from experimental and clinical studies is reviewed. Pathophysiological factors and patient characteristics that influence RRI are explored to provide a better understanding of why RRI values change in the presence of common or complex pathologies. Conclusion: By gaining a better understanding of the complex systemic and renal factors that influ-ence RRI, ultrasound users will be better prepared to understand and interpret changes in RRI across a range of patient presentations.

Hydrogen has a leading role in accomplishing a net zero green-house gas emission future. Today’s challenge is producing green hydrogen to cover the fuel demand of transportation and industry, to gain independence from fossil fuels. This review’s goal is to demonstrate critically the existing methods of biomass treatment and assess their ability to scale up. Biomass is an excellent hydrogen carrier and biomass-derived processes are the main target for hydrogen production as it is an innovative pathway to green hydrogen production. Comparing the existing processes, thermochemical treatment is found to be far more evolved than biological or electrochemical treatment especially with regard to scaling prospects.

Simulated (sim) racing is an emerging esport that has garnered much interest in recent years and has been a relatively under-researched field in terms of expertise and performance. When examining expertise, visual attention has been of particular interest to researchers, with eye tracking technology commonly used to assess visual attention. In this study, we examined the visual attention allocation of high and low skilled sim racers during a time trial task using Tobii 3 glasses. Participants were allocated to either group according to their fastest lap times. Our results indicate that when eye tracking metrics were normalised to lap time, there was no difference in the relative length of attention allocation (fixation behaviour), although lower skilled racers did have significantly greater fixation counts and durations across laps overall. Interestingly, high and low skilled sim racers differed in where they allocated their attention during the task, with high skilled sim racers allocating significantly less attention to the track relative to other areas of the display. This would allow higher skilled racers to obtain relatively more information from heads-up display elements in-game, all whilst driving at faster speeds. This study provides evidence that high and low skilled sim racers show similar lap time-corrected fixation behaviour, but how they allocate attention while driving differs.

The formation of sinkholes in Winkler County, Texas is concerning due to the amount of oil and gas infrastructure and the potential for catastrophic losses. Evidences of new and potential sinkholes have been documented, and determining the cause of these sinkholes is paramount to mitigate the devastating consequences thereof. Studies shown that the Wink sinkholes result from both natural and anthropogenic influences. Data depicting land-cover changes, alterations in the hydrologic systems, climate changes, and oil and gas activity were analyzed in an effort to better understand the link between these processes and sinkhole formation. Results indicate that the combination of these processes lead to the current state; Land cover changes were highest in shrub versus grasses, undeveloped to developed and croplands. Rises in temperature and a decrease in precipitation indicate a shift towards a more arid climate. Changes to the hydraulic system are a direct result of these land cover changes while the groundwater quality depict an environment prone to dissolution. Historical oil and gas activities have created pathways of meteoric water infiltration to the underlying limestone and evaporite formation. The combination of these processes create an environment that accelerates sinkhole formations. Understanding these processes allows for the development and implementation of better land practices, better groundwater protections, and the need for monitoring and maintaining aging oil and gas infrastructure.

Glycerol represents a useful functional component of heat-transfer fluids. Glycerol is known to be triboelectrically active. We report how the flow of glycerol, stopped in a cylindrical coiled pipe, influences horseradish peroxidase (HRP) enzyme. Namely, glycerol flow was pumped through the coil and then stopped. After that, we incubated the 0.1 µM solution of HRP near the side of the coil, and then adsorbed HRP onto mica. This operation markedly increased the HRP aggregation on mica in comparison with the control sample. We explain this phenomenon by the influence of triboelectrically induced electromagnetic fields. Our results can be useful in the development of flow-based systems for biosensors and bioreactors.

One open question remains regarding the theory of the generalized variational principle, that is, why the stress-strain relation still be derived from the generalized variational principle while the Lagrangian multiplier method is applied in vain? This study shows that the generalized variational principle can only be understood and implemented correctly within the framework of thermodynamics. As long as the functional has one of the combination $A(\epsilon_{ij})-\sigma_{ij}\epsilon_{ij}$ or $B(\sigma_{ij})-\sigma_{ij}\epsilon_{ij}$, its corresponding variational principle will produce the stress-strain relation without the need to introduce extra constraints by the Lagrangian multiplier method. It is proved herein that the Hu-Washizu functional $\Pi_{HW}[u_i,\epsilon_{ij},\sigma_{ij}]$ and Hu-Washizu variational principle comprise a real three-field functional.

Palmitoylethanolamide (PEA) has been prescribed for neuropathic pain for several years. This study is mainly addressed to summarize what has been published on the topic in the last decades, and how appropriate the numerous prescriptions are. Among others, it examines the innovative EquiPEA^® patent, which aims to address obstacles encountered with conventional PEA formulations. EquiPEA^® seems to partially ameliorate the bioavailability and the targeted distribution. It seems to introduce novel advancements that have the potential to enhance the therapeutic effectiveness of PEA in terms of its anti-inflammatory, antioxidant, and analgesic properties. The deep literature analysis aims to examine the potential advantages of this innovative formulation, in the context of several pathological conditions that may benefit from this molecule. In particular, it investigates the potential enhanced bioavailability and targeted delivery system of EquiPEA^®. Also, it tries to understand if it can modernize the field of therapy based on PEA, thus offering a better treatment option for individuals with long-term inflammation, oxidative stress, and neuropathic or mixed pain with a neuropathic component. The study examines the possible impact of EquiPEA^® on personalized medicine strategies and its potential for translation into clinical practice. It analyses the possibilities that EquiPEA^® has in enhancing patient outcomes in a range of central nervous system and inflammatory conditions. This narrative review makes a valuable contribution to the ongoing comprehension of PEA therapy. It establishes a foundation for further exploration in research and potential uses in clinical settings.

Cold brew coffee is a new trend in coffee industry. This paper presents pilot studies into several aspect of this beverage. Using an online survey, the current practices of cold brew coffee preparation were investigated identifying a rather large variability with a preference for extraction of medium roasted Arabica coffee using 50-100 g/l at 8°C for about 1 day. Sensory testing using ranking and triangle tests showed that cold brew may be preferred over iced coffee (cooled down hot extracted coffee). Extraction experiments at different conditions combined with nuclear magnetic resonance (NMR) analysis showed that the usual extraction time may be longer than necessary as most compounds are extracted within only a few hours, while increasing turbulence (e.g. using ultrasonication) and temperature may additional increase the speed of extraction. NMR analysis also revealed a possible chemical differentiation between cold brew and hot brew using multivariate data analysis. Decreased extraction time and reduced storage times could be beneficial for cold brew product quality as microbiological analysis of commercial samples detected samples with spoilage organisms and contamination with Bacillus cereus.

Duke University was founded in 1930 primarily due to funds generated from James B. Duke’s tobacco business. Duke achieved great financial wealth primarily due to the early application of machine rolled cigarettes, as opposed to hand rolled. This early adoption of technology allowed Duke Tobacco to out-produce other companies still selling hand rolled cigarettes. By making smoking more inexpensive and easier than pipe smoking, the cigarette formed the foundation for nicotine addiction in the 1900s, generating huge profits for the tobacco industry. At the time Duke University was founded, little was known about the connection between nicotine, cigarettes, and respiratory diseases such as emphysema and lung cancer. Through James Duke’s philanthropy, the devastating harm from cigarettes has been mitigated in part through the founding of one of the world’s most prominent medical centers and research universities.

This study uses a mass-spring-damping system to simulate the repeated strain of liquefaction cyclic triaxial tests. The two results are compared in this paper to understand the feasibility of the mass-spring-damping system developed in this paper and the feasibility of future research on this related topic and development potential. The main factors affecting this mode's repeated strain are the spring coefficient k and the external force Q0. The spring coefficient has an inverse relationship but does not increase in multiples. The external force has a direct proportional relationship but does not increase the result- a non-multiple increase. When the pore water pressure of the liquefied cyclic triaxial test specimen rises, it will cause the specimen to liquefy, decreasing effective stress, shear modulus G, and damping ratio D, causing an increase in strain. The shear modulus and damping ratio are related to the spring coefficients k and c. Both are variables that change with time. This article takes an original thin-tube specimen at point A in the Yunlin area in Taiwan as a testing example. Through Mathematica software, it can be obtained that the mass m=1kg, the spring coefficient k=244e-0.1t kgf/cm, and the damping coefficient c=0.739e-0.257t kgf-s/cm and external force Q0=10.1sin2πt kg; Finally, this study selected the original thin-tube specimens from four locations in the Yunlin area, and simulated the repeated strain amount of the cyclic triaxial test specimens through a spring-damping system. The results show that the spring-damping system is feasible for simulated cyclic triaxial tests because the model is simple and the parameters are easy to understand and obtain, which also shows the extensibility of this model. Preliminary results of the research show that this model can further simulate the repeated strain obtained by cyclic triaxial tests without considering the increased trend in pore water pressure and the decrease in effective stress during cyclic loading.

When discussing the concepts of risk, safety, and security, people have an intuitive understanding of what these concepts mean, and, to a certain level, this understanding is universal. However, when delving into the real meaning of these concepts, one is likely to fall into semantic debates and ontological discussions. In industrial parks, it is important that (risk) managers from dierent companies, belonging to one and the same park, have the same understanding of the concepts of risk, safety, and security. It is even important that all companies in all industrial parks share a common understanding regarding these issues. As such, this paper explores the similarities and dierences behind the perceptions of these concepts, to come to a fundamental understanding of risk, safety, and security, proposing a semantic and ontological ground for safety and security science, based on an etymological and etiological study of the concepts of risk and safety. The foundation has been induced by the semantics used in the ISO 31000 risk management guidance standard. Hence, this article proposes a coherent, standardized set of concepts and definitions with a focus on the notion “objectives” that can be used as an ontological foundation for safety and security science, linking “objectives” with the concepts of safety, security, risk, performance and also failure and success, theoretically allowing for an increasingly more precise understanding and measurement of (un)safety across the whole range of individuals, sectors and organizations, or even society as a whole.

Wildfires have always been a part of the history of Mediterranean forests. However, forest regeneration after a wildfire is not certain. It depends on many factors, some of which may be influenced by land management activities. Failure of regeneration will cause a regime shift in the ecosystem, reducing the provision of ecosystem services and ultimately leading to desertification. How can we increase Mediterranean forests’ resilience to fire? To answer this question, we did a literature review, investigating chains of processes that allow forests to regenerate (which we label “regeneration mechanisms”), and assessed the impact of selected management practices documented in the WOCAT database on the regeneration mechanisms. We identified three distinct regeneration mechanisms that enable Mediterranean forests to recover, as well as the time frame before and after a fire in which they are at work, and factors that can hinder or support resilience. The three regeneration mechanisms enabling a forest to regenerate after a fire consist of regeneration (1) from a seed bank; (2) from resprouting individuals; and (3) from unburned plants that escaped the fire. Management practices were grouped into four categories: (1) fuel breaks, (2) fuel management, (3) afforestation, and (4) mulching. We assessed how and under what conditions land management modifies the ecosystem’s resilience. The results show that land management influences resilience by interacting with resilience mechanisms before and after the fire, and not just by modifying the fire regime. Our analysis demonstrates a need for adaptive – i.e. context- and time-specific – management strategies.

Abstract: Mass spectrometry research laboratories reported multiple probes for ambient ionization in the last years. Combining them with a mechanical moving stage enables automated sampling and imaging applications. We developed a robotic platform, which is based on RepRap 3D-printer components, and therefore easy to reproduce and to adopt for custom prototypes. The minimal step width of the Open LabBot is 12.5 μm, and the sampling dimensions (x, y, z) are 18 × 15 × 20 cm. Adjustable rails in an aluminium frame construction facilitate the mounting of additional parts such as sensors, probes, or optical components. The Open LabBot uses industry-standard G-code for its control. The simple syntax facilitates the programming of the movement. We developed two programs: 1) LABI-Imaging, for direct control via a USB connection and the synchronization with MS data acquisition. 2) RmsiGUI, which integrates all steps of mass spectrometry imaging: The creation of G-code for robot control, the assembly of imzML files from raw data and the analysis of imzML files. We proved the functionality of the system by the automated sampling and classification of essential oils with a PlasmaChip probe. Further, we performed an ambient ionization mass spectrometry imaging (AIMSI) experiment of a lime slice with laser desorption low-temperature plasma (LD-LTP) ionization, demonstrating the integration of the complete workflow in RmsiGUI. The design of the Open LabBot and the software are released under open licenses to promote their use and adoption in the instrument developers’ community.

In Australia, traditional methods of cat management by local government (councils) animal management officers (AMO) have been ineffective, with cat-related calls and cat impoundments continuing to increase, resulting in many healthy cats being euthanized. This has detrimental effects on the mental health of AMOs, pound and shelter staff and veterinarians. The City of Banyule, Victoria implemented a free cat sterilization, microchipping and registration (licensing) program in 2013-14. Initially targeted to three low socioeconomic suburbs with the highest cat-related calls and intake, where enforcement action had little effect. An average of 4.1 cats/1000 residents per year were sterilized over eight years. The program was available to all cats in the area, including stray cats being fed by caregivers, provided they took ownership of the cats. There were no limitations on the number of cats enrolled per household and free transport was provided if required. The program was later expanded city-wide. Over eight years, city-wide cat intake decreased by 66%, euthanasia by 82%, with an increase in proportion of cats reclaimed by owners from a baseline of 6% of intake (2012-13) to 16% (2020-21). Cat-related calls decreased in the target area by 51% and city-wide by 36%. The council’s financial outlay was $84,000, which resulted in decreased costs as-sociated with cat-related calls of $266,225.00. Instead of traditional trap-adopt- kill, proactive management of urban cats based on targeted sterilization should be utilized by government and animal welfare agencies in Australia and internationally. These types of programs are effective at reducing intake and euthanasia and are cost-effective.

This paper investigates the influence of magnetic field for a two dimensional deformations on a two temperature problem at the free surface of a semi-infinite semiconducting medium under the effect of mechanical force during a photothermal theory and the effect of hydrostatic initial stress on the medium. The Harmonic Wave Method (Normal Mode Analysis) has been used to obtain the equations of elastic waves, heat conduction equation, quasi-static electric field, carrier density, two temperature coefficient, ratios, and constitutive relationships for the thermo-magnetic-electric medium. The effects of several parameters as thermoelastic and thermoelectric coupling parameters and two temperature parameter of this force on the displacement component, force stress, carrier density and temperature distribution has been depicted graphically.

Psoriasis is a lifelong, systemic, immune mediated inflammatory skin condition, affecting 1-3% of the world’s population, with an impact on quality of life similar to diseases like cancer or diabetes. Genetics are the single largest risk factor in psoriasis, with GWAS studies showing that many psoriasis risk genes lie along the IL23/Th17 axis. Potential psoriasis risk genes determined through GWAS can be annotated and characterised using functional genomics, allowing the identification of novel drug targets and the repurposing of existing drugs. The pathogenesis of psoriasis is complex and focusing on the IL23/Th17 axis can provide insight into key cell types, cytokines and intracellular signaling pathways involved. Examination of currently available biological treatments, time to relapse post drug withdrawal and rates of drug primary/secondary drug failure show the need for greater understanding of the underlying genetic mechanisms of psoriasis and how they can impact treatment. This could allow for patient stratification towards the treatment most likely reduce dis-ease burden for the longest period possible.

To maintain an optimal body content of phosphorus throughout postnatal life, variable phosphate absorption from food must be finely matched with urinary excretion. This amazing feat is accomplished through synchronised phosphate transport by myriads of ciliated cells lining the renal proximal tubules. These respond in real time to changes in the phosphate and composition of the renal filtrate, and to hormonal instructions. How they do this has stimulated decades of research. New analytical techniques, coupled with incredible advances in computer technology, have opened new avenues for investigation at a sub-cellular level. There has been a surge of research into different aspects of the process. These have verified long held beliefs and are also dramatically extending our vision of the intense, integrated, intracellular activity which mediates phosphate absorption. Already, some have indicated new approaches for pharmacological intervention to regulate phosphate in common conditions, including chronic renal failure and osteoporosis, as well as rare inherited biochemical disorders. It is a rapidly evolving field. The aim here is to provide an overview of our current knowledge, to show where it is leading, and where there are uncertainties. Hopefully this will raise questions and stimulate new ideas for further research.

A major challenge of augmented and mixed reality applications is identifying the context and semantics of the real environment. Studies on object and action recognition were developed based on the improvement of machine learning techniques, allowing them to be annotated and recognized. This study aims to characterize current knowledge on the use of machine learning for recognizing objects and actions in augmented and mixed reality environments, increasing context awareness. Therefore, a systematic literature review of works related to these topics was made, using the Scopus and Web of Science knowledge bases. We searched articles and conference reviews or papers published between 2018 and 2022 and selected fifteen studies to be reviewed. The results indicate that there is a great demand for using machine learning to immersive technologies in factories, engineering, entertainment, education, health, among other application domains. However, these real-time interactive systems still have challenges and limitations to be solved, involving network communication, prediction time and the creation of a model that recognize objects and actions in broad contexts. Furthermore, additional research is needed to investigate how object and action recognition can increase context awareness in augmented reality applications.

It was the aim of this study to examine whether the usage of the vaccine COXEVAC® (Ceva Santé Animale) could reduce the consumption of antibiotics in Q-fever-positive dairy farms. Additionally, the effects of other herd-level factors on the consumption of antibiotics were investigated. In this longitudinal cohort study, 36 farms with vaccination and 13 farms without vaccination participated. In all herds, Coxiella burnetii had been directly or indirectly diagnosed. To compare the treatment frequency of antibiotics between the vaccinated group and the non-vaccinated group, the consumption of antibiotics for each farm was collected using the veterinary documents about the application and delivery of antibiotics. To gather detailed information about herd data, nutrition, milking management, housing, and animal health, the farmers were interviewed with the help of a questionnaire. The results suggest that there might be an association between the vaccination against Q fever and a reduced consumption of antibiotics. Neither herd size nor milk yield level influenced the consumption of antibiotics in the study herds. Type of flooring and udder cluster disinfection while milking were associated with a lower and higher therapy frequency, respectively. Further studies are necessary to elucidate the cause-effect relationship between vaccination and the consumption of antibiotics.

Abstract: Patient blood samples are invaluable in clinical omics databases, yet current methodologies often fail to fully uncover the molecular mechanisms driving patient pathology. While Genome-scale Metabolic Models (GEMs) show promise in systems medicine by integrating various omics data, having only exometabolomic data remains a limiting factor. To address this gap, we introduce a comprehensive pipeline integrating GEMs with patient plasma metabolome. This pipeline constructs case-specific GEMs using literature-based and patient-specific metabolomic data. Novel computational methods, including adaptive sampling and an in-house developed algorithm for the rational exploration of the sampled space of solutions, enhance integration accuracy while improving computational performance. Model characterization involves task analysis in combination with clustering methods to identify critical cellular functions. The new pipeline was applied to a cohort of trauma patients to investigates shock-induced endotheliopathy using patient plasma metabolome data. By analyzing endothelial cell metabolism comprehensively, the pipeline identified critical substrates and contributed to the development of targeted therapeutic strategies. Our study demonstrates the efficacy of integrating patient plasma metabolome data into computational models to analyze endothelial cell metabolism in disease contexts. This approach offers a deeper understanding of metabolic dysregulations and provides insights into diseases with metabolic components and potential treatments.

The Gol'denveizer problem of a torus can be described as follows: a toroidal shell is loaded under axial forces and the outer and inner equators are loaded with opposite balanced forces. Gol'denveizer pointed out that the membrane theory of shells is unable to predict deformation in this problem, as it yields diverging stress near the crowns. Although the problem has been studied by Audoly and Pomeau (2002) with the membrane theory of shells, the problem is still far from resolved within the framework of bending theory of shells. In this paper, the bending theory of shells is applied to formulate the Gol'denveizer problem of a torus. To overcome the computational difficulties of the governing complex-form ordinary differential equation (ODE), the complex-form ODE is converted into a real-form ODE system. Several numerical studies are carried out and verified by finite-element analysis. Investigations reveal that the deformation and stress of an elastic torus are sensitive to the radius ratio, and the Gol'denveizer problem of a torus can only be fully understood based on the bending theory of shells.

Psoriasis is a multi-factorial immune-mediated disease that affects approximately 2% of the UK population and 2.5% worldwide. The condition can impact multiple organs, including the skin and joints. In moderate to severe cases, systemic and topical medications may not provide adequate relief, and as a result, biologic treatments are often administered as a monotherapy or in combination with other treatments. While biologic treatments are more effective than systemic and topical medications in treating psoriasis, patients require close supervision and monitoring while receiving this type of treatment. Liposomes are highly versatile and can be employed for therapy and research applications. They enhance drug retention at the site of administration, thereby reducing systemic side effects. Our study was the first to investigate the genotoxicity of secukinumab, an ideal biologic treatment for psoriasis (a human IgG1k antibody, anti-IL17A), in bulk and liposome nanoparticles on the lymphocytes of psoriasis patients compared to healthy individuals. We evaluated and com-pared the genotoxicity of secukinumab in bulk and liposomal form using the Comet and micronucleus assays. Both assays demonstrated that secukinumab in both forms did not ex-hibit genotoxicity and reduced DNA damage following treatment of the lymphocytes from healthy individuals and psoriatic patients with secukinumab bulk and liposomes format. Both concentrations of secukinumab used (2.1 and 2.8 µg/mL) effectively decreased H2O2-induced DNA damage in both groups to nearly the level of the negative control. Secukinumab bulk and liposome form significantly decreased H2O2-induced damage and efficiently attenuated its adverse effects both in the Comet (p<0.0001) and micronucleus assays (p<0.01). Overall, secukinumab in both forms exhibited protective and an-ti-genotoxic effects by demonstrating its potential to reduce DNA damage caused by oxida-tive stress and by not inducing any further damage in the lymphocytes of either healthy in-dividuals or patients.

This study investigates the unique morphology and mechanical properties of multi-jet electrospun cashew gum (CG) when combined with high molecular weight polyethylene oxide (PEO) and glycerol. Cashew gum (CG) is an inexpensive, non-toxic polysaccharide derived from Anacardium occidentale trees. Initially, the electrospinnability of aqueous solutions of cashew gum alone or in combination with PEO was evaluated. It was found that cashew gum alone was not suitable for electrospinning; thus, adding a small quantity of PEO was needed to create the necessary molecular entanglements for fiber formation. By using a single emitter with a CG:PEO ratio of 85:15, straight and smooth fibers with some defects were obtained. However, additional purification of the cashew gum solution and the incorporation of glycerol as a plasticizer were necessary to produce defect-free straight and smooth fibers. Interestingly, when the optimized formulation was electrospun using multiple simultaneous emitters, thicker aligned fiber bundles were achieved. Moreover, the resulting oriented fiber mats exhibited unexpectedly high elongation at break at ambient conditions. These findings highlight the potential of this bio-polysaccharide-based formulation for non-direct water contact applications requiring elastic properties.

Although Darwin‘s evolutionary mutation theory has been widely accepted, many endeavors have been tried to challenge it. With more and more observation of successful hybridization and hybrids, the sexual isolation between species has become vague. The mechanism of evolution has been expanded from the classical model of evolution to multiple routes of speciation. Furthermore, a fundamental crossbreeding theory has been raised and proved by two lines of evidences: paleopolyploidy and fan-shaped spectrum of species. Ancient genome duplications are widespread throughout eukaryotic lineages, particularly in plants. The genome polyploidization, especially in the somatic cell hybridization, can break through the sexual incompatibility between diploid counterparts to hybridize and produce new species. By comparing characteristics, all species in every taxon, both in the extinct fossil and extant organisms, can be arranged into fan-shaped spectrum according to their similarity: left primitive type-middle advanced type-right primitive type. The species are primitive at the two ends and advanced at the middle. The primitive two species always resemble two types of more primitive species that can be confirmed as their ancestors respectively, and the middle species is half similar to the two ancestors respectively. These suggest that the species in the spectrum come from two different ancestors by crossbreeding and gene combination. As a sum, advanced species originated from crossbreeding of two primitive ancestors, by major method of polyploidization, and proved by results of fan-shaped spectrum of species. Then, sex is the cause, force and opportunity for evolution.

As Christopher Alexander conceived and defined through his life’s work – The Nature of Order – wholeness is a recursive structure that recurs in space and matter and is reflected in human minds and cognition. Based on the definition of wholeness, a mathematical model of wholeness, together with its topological representation, has been developed, and it is able to address not only why a structure is beautiful, but also how much beauty the structure has. Given the circumstance, this paper is attempted to argue for the wholeness as the scientific foundation of sustainable urban design and planning, with the help of the mathematical model and topological representation. We start by introducing the wholeness as a mathematical structure of physical space that pervasively exists in our surroundings, along with two fundamental laws – scaling law and Tobler’s law – that underlie the 15 properties for characterizing and making living structures. We argue that urban design and planning can be considered to be wholeness-extending processes, guided by two design principles of differentiation and adaptation, to transform a space – in a piecemeal fashion – into a living or more living structure. We further discuss several other urban design theories and how they can be justified by and placed within the theory of wholeness. With the wholeness as the scientific foundation, urban design can turn into a rigorous science with creation of living structures as the primary aim.

Virtual reality software might be challenging to utilize for beginners and unskilled professionals who do not have a programming or 3D modeling background. Concurrently, there is a knowledge gap in software project design for intuitive virtual reality authoring tools, which were supposed to be easier to use. These tools are frequently insufficient due to a lack of support and standard operating procedures. Adopting the Design Science Research paradigm, this study aims to evaluate the validity of fourteen design guidelines for the development of intuitive virtual reality authoring tools as an artifact. While a previous study completed the first steps of the Design Science Research, by identifying problems, defining solution objectives, and developing and demonstrating the design guidelines, this work seeks to qualitatively evaluate their application in a practical experiment. A group of engineering students with no prior experience in creating virtual worlds were tasked with examining the design guidelines while using the NVIDIA Omniverse Enterprise as an exemplary use case and responding to a questionnaire and a focus group interview about how they perceived these guidelines. A correlation analysis confirmed that most guidelines scores behaved as expected and were ranked according to the use-case functionality. The participants understood the guidelines' definition and could decide if they agreed or disagreed with their presence during the experiment. We conclude that, in accordance with the Design Science Research, the proposed artifact is useful, i.e., the design guidelines for virtual reality authoring tools perform what they are designed to do and are operationally reliable in accomplishing their goals.

Because data on the fungal gut community structure of African children are scarce, we aimed to describe by reanalysing rRNA ITS1 and ITS2metabarcoding data from a study designed to assess the influence of microbiota in malaria susceptibility in Malian children from the Dogon country. More specifically, we aimed to establish the core gut mycobiome and compare the gut fungal community structure of breastfed children, aged 0-2 years, with other age groups. Briefly, DNA was extracted from 296 children’s stool samples. Both rRNA ITS1 and ITS2 genomic barcodes were amplified and subjected to Illumina MiSeq sequencing. The ITS2 barcode generated 1,975,320 reads and 532 operational taxonomic units (OTUs), while the ITS1 barcode generated 647,816 reads and 532 OTUs. The alpha diversity was significantly higher by using the ITS1 compared to the ITS2 barcode (p

The massive amount of human biological, imaging and clinical data produced by multiple and diverse sources, necessitates integrative modeling approaches able to summarize all this information into answers to specific clinical questions. In this paper, we present a hypermodeling scheme able to combine models of diverse cancer aspects regardless of their underlying method or scale. Describing tissue-scale cancer cell proliferation, biomechanical tumor growth, nutrient transport, genomic-scale aberrant cancer cell metabolism, and cell signaling pathways that regulate the cellular response to therapy, the hypermodel integrates mutation, miRNA expression, imaging, and clinical data. The constituting hypomodels as well as their orchestration and links are described. Two specific cancer types, Wilms tumor (nephroblastoma) and non-small cell lung cancer, are addressed as proof of concept study cases. Personalized simulations over the actual anatomy of a patient have been carried out. The hypermodel has also applied to predict tumor control after radiotherapy and the relationship between tumor proliferative activity and response to neoadjuvant chemotherapy. Our innovative hypermodel holds promise as a digital twin based clinical decision support system and the core of future in silico trial platforms, although additional retrospective adaptation and validation is necessary.

Acute and chronic respiratory diseases impose a significant economic and health burden. Distal small airway assessment requires invasive procedures such as a bronchoscopy and bronchoalveolar lavage. The Particles in Exhaled Air (PExA) device provides a non-invasive means of assessing small airways; it captures distal airway particles sized around 0.5-7m and contains particles of respiratory tract lining fluid (RTLF) that originate during airway closure and opening. The PExA device can measure particle count and mass according to particle size. Subsequent capture of particles in a thin membrane enables application of various analytical methods to assess a broad range of biomolecules including phospholipids, proteins, inflammatory profile, and other metabolites to characterise inflammation and diseases processes such as asthma, chronic obstructive pulmonary disease, acute respiratory distress syndrome, lung cancer, and more recently acute infections such as COVID-19. PExA analysis provides a promising alternative to traditional investigative methods in the assessment, diagnosis, and management of respiratory conditions. By evaluating specific biomarkers in the RTLF associated with airway inflammation, PExA may offer a more accurate and comprehensive understanding of the molecular-level changes in the small airways of patients with acute and chronic lung diseases.

In a wide range of lymphoid neoplasms, the process of malignant transformation is associated to somatic mutations in B cells that affect the epigenetic machinery. Consequential alterations in histone modifications contribute to disease-specific changes in the transcriptional program. Affected genes commonly play important roles in cell cycle regulation, apoptosis-inducing signal transduction and DNA damage response, thus facilitating the emergence of malignant traits that impair immune surveillance and favor the emergence of different B-cell lymphoma subtypes. In the last two decades, the field has made a major effort to develop therapies that target these epigenetic alterations. In this review, we discuss which epigenetic alterations occur in non-Hodgkin B-cell lymphoma. Furthermore, we aim to present in close to comprehensive manner the current state-of-the-art in the preclinical and clinical development of epigenetic drugs. We focus on therapeutic strategies interfering with histone methylation and acetylation as these are most advanced in being deployed from the bench-to-bedside and have greatest potential to improve the prognosis of lymphoma patients.

We present a case of a 47-year-old male who died unexpectedly from acute pulmonary hemorrhage 555 days after completing the BNT162b2 (Pfizer) COVID-19 vaccination primary series. Before death, he exhibited symptoms of a mild respiratory infection. Despite a healthy medical history and no medication use, the patient’s condition rapidly deteriorated and he experienced severe respiratory distress, followed by cardiopulmonary arrest with evidence of profuse pulmonary bleeding. Autopsy findings revealed massive lung congestion without embolism, normal heart size, moderate coronary atherosclerosis without myocardial infarction, and no evidence of other hemorrhagic events. The patient tested negative for COVID-19 and other respiratory pathogens at autopsy. Despite these findings, the medical examiner determined the cause of death was attributed to atherosclerotic and hypertensive cardiovascular disease, without considering the recent pulmonary hemorrhage and unremarkable medical history. Investigation into the vaccine batch indicated a higher-than-average number of serious adverse events, including fatalities. The patient's BNT162b2 batch was among the top 2.8% for reported deaths. Moreover, the autopsy failed to investigate potential contributions from the vaccine, such as the presence of the Spike protein or related antibodies. The evidence suggests that the pulmonary hemorrhage, exacerbated by a viral infection, was the immediate cause of death, with the COVID-19 vaccine potentially playing a role in the development of cardiopulmonary pathology and hemorrhage. We propose autopsy protocols for COVID-19 vaccine recipients to better investigate vaccine-related pathologies among those with one or more prior injections.

The nonlinear deformation and stress analysis of a circular torus is a difficult undertaking due to its complicated topology and the variation of the Gauss curvature. A nonlinear deformation (only one term in strain is omitted) of Mindlin torus was formulated in terms of the generalized displacement, and a general Maple code was written for numerical simulations. Numerical investigations show that the results obtained by nonlinear Mindlin, linear Mindlin, nonlinear Kirchhoff-Love, and linear Kirchhoff-Love models are close to each other. The study further reveals that the linear Kirchhoff-Love modeling of the circular torus gives good accuracy and provides assurance that the nonlinear deformation and stress analysis (not dynamics) of a Mindlin torus can be replaced by a simpler formulation, such as a linear Kirchhoff-Love theory of the torus, which has not been reported in the literature.

Machine learning methods have been a standard approach to select features that are associated with an outcome and build a prediction model when the number of candidate features is large. LASSO has been one of the most popular approaches to this end. LASSO approach selects features with large regression estimates, rather than based on statistical significance, associating the outcome, by imposing L1-norm penalty to overcome the high dimensionality of the candidate features. As a result, LASSO may select insignificant features while possibly missing significant ones. Furthermore, from our experience, LASSO has been found to select too many features. By selecting features that are not associated with the outcome, we may have to spend more cost to collect and manage them in the future use of a fitted prediction model. Using the combination of L1- and L2-norm penalties, elastic net (EN) tends to select more features than LASSO. The overly selected features that are not associated with the outcome act like white noise, so that the fitted prediction model loses the prediction accuracy. In this paper, we propose to use the standard regression methods (without any penalizing approach) with stepwise variable selection procedure to overcome these issues. Unlike LASSO and EN, this method selects features based on statistical significance. Through extensive simulations, we show that this maximum likelihood estimation based method selects very small number of features while maintaining a high prediction power, while LASSO and EN make a large number of false selections to result in loss of prediction accuracy. Contrary to LASSO and EN, the regression methods combined with a stepwise variable selection method is a standard statistical method, so that any biostatistician can use it to analyze high dimensional data even without advanced bioinformatics knowledge.

In view of the complexity of the pile foundation underpinning structure system and the stringent requirements of the construction process, this paper briefly describes the necessity of introducing epoxy resin reinforcing adhesive of planting rebar in the design of pile foundation underpinning beam structure to im-prove the mechanical properties of the underpinning beam new and old concrete joint surfaces and proposes a new type of pile foundation underpinning beam system construction method by “chiseling + prestressed reinforcement + epoxy resin reinforcing adhesive”. This paper uses an actual pile foundation underpinning project of an urban overpass as a prototype, designs and creates a model structure with a similarity ratio of 1/6, and performs repeated pro-gressive static loading tests to study the load carrying capacity, displacement change, and other properties of the underpinning structure, as well as analyses and distorts the overall working performance and failure mode of them. On this basis, the prototype structure's finite element analysis model was built, and the finite element analysis results were compared with the test results to get the mechanical properties and deformation characters of the actual pile foundation under-pinning structure system corresponding to the actual underpinning beam load. This paper's study can lay the theoretical and experimental foundation for the smooth development of similar projects.

In this report we describe the case of a healthy, young, athletic woman who developed acute lymphoblastic leukaemia (ALL)/lymphoblastic lymphoma (LBL) after receiving the second dose of the Pfizer/BioNTech modified mRNA (modRNA) COVID-19 genetic vaccine (marketed as Comirnaty^®). The first dose of the genetic vaccine did not appear to illicit any noticeable side effects, but within 24 hours of the second dose the patient suffered widespread and intensifying bone pain, fever, vomiting, and general malaise. Due to the persistence of the symptoms, the patient underwent a series of tests and examinations including a full laboratory workup, a consult with a clinical immunologist and rheumatologist, a Positron Emission Tomography (PET) imaging, as well as an osteomedullary biopsy. These together led to a definitive diagnosis of ALL. A time interval of 16 weeks from the second vaccination to the diagnosis of cancer was noted. Several similar cases with identical pathology which developed after the modRNA COVID-19 vaccination, are described in case reports in the scientific literature. The massive and indiscriminate use of genetic vaccines to fight COVID-19 is raising serious concerns about their safety and about the technology platform as a whole for this purpose. Growing evidence is accumulating regarding the biodistribution and persistence of the modRNA which can reach, thanks to the lipid nanoparticles, a multitude of tissues and organs of the body, including the bone marrow and other blood-forming organs and tissues. Moreover, there is evidence that the modRNA vaccines display a particular tropism for the bone marrow, influencing the immune system at multiple levels and being able to trigger not only autoimmune-based pathologies, but also neoplastic mechanisms. The aim of this article is to assess, on the basis of the available scientific literature, the risk of developing haematopoietic cancers after modRNA vaccination, and to investigate the potential genetic mechanisms involved in the pathogenesis of disease.

The option of decarbonizing urban freight transport using Battery Electric Vehicle (BEV) seems promising.However, there is currently a strong debate whether Fuel Cell Electric Vehicle (FCEV) might be the bettersolution. The question arises as to how a fleet of FCEV influences the operating cost, the Greenhouse Gas(GHG) emissions and primary energy demand in comparison to BEVs and to Internal Combustion EngineVehicle (ICEV). To investigate this, we simulate the urban food retailing as a representative share of urbanfreight transport using a multi-agent transport simulation software. Synthetic routes as well as fleet size andcomposition are determined by solving a Vehicle Routing Problem (VRP). We compute the operating costsusing a total cost of ownership (Total Cost of Ownership (TCO)) analysis and the use phase emissions as wellas primary energy demand using the Well To Wheel (WTW) approach. While a change to BEV results in 17 -23% higher costs compared to ICEV, using FCEVs leads to 22 - 57% higher costs. Assuming today’s electricitymix, we show a GHG emission reduction of 25% compared to the ICEV base case when using BEV. Currenthydrogen production leads to a GHG reduction of 33% when using FCEV which however cannot be scaled tolarger fleets. Using current electricity in electrolysis will increase GHG emission by 60% compared to the basecase. Assuming 100% renewable electricity for charging and hydrogen production, the reduction from FCEVsrises to 73% and from BEV to 92%. The primary energy requirement for BEV is in all cases lower and forhigher compared to the base case. We conclude that while FCEV have a slightly higher GHG savings potentialwith current hydrogen, BEV are the favored technology for urban freight transport from an economic andecological point of view, considering the increasing shares of renewable energies in the grid mix.

Tumid Lupus Erythematosus has been the subject of heated debate as to its correct nosographic classification. In particular, its definition has changed over time, depending on the different studies performed. In this review we address the initial definition of TLE, the changes that have taken place in the understanding and placement within the classification of Lupus Erythematosus (LE), and focus on clinical, histopathological, immunophenotypical and differential diagnosis aspects.

The formulation used by most of the studies on an elastic torus are either Reissner mixed formulation or Novozhilov's complex-form one, however, for vibration and some displacement boundary related problem of a torus, those formulations face a great challenge. It is highly demanded to have a displacement-type formulation for the torus. In this paper, I will carry on my previous work [ B.H. Sun, Closed-form solution of axisymmetric slender elastic toroidal shells. J. of Engineering Mechanics, 136 (2010) 1281-1288.], and with the help of my own maple code, I am able to simulate some typical problems and free vibration of the torus. The numerical results are verified by both finite element analysis and H. Reissner's formulation. My investigations show that both deformation and stress response of an elastic torus are sensitive to the radius ratio, and suggest that the analysis of a torus should be done by using the bending theory of a shell, and also reveal that the inner torus is stronger than outer torus due to the property of their Gaussian curvature. Regarding the free vibration of a torus, our analysis indicates that both initial in u and w direction must be included otherwise will cause big errors in eigenfrequency. One of the most intestine discovery is that the crowns of a torus are the turning point of the Gaussian curvature at the crown where the mechanics' response of inner and outer torus is almost separated.

The mechanisms of natural oscillations and resonance are described, considering the peculiarities of the transformation of elastic and kinetic energy in the implementation of the law of conservation of energy in local and integral volumes of the body, using the concept of mechanics based on the concepts of space, time and energy. When describing the motion in the Lagrange form, the elastic deformation energy of the particles is determined by the quadratic invariant of the tensor, whose components are the partial derivatives of Euler variables with respect to Lagrange variables. The increment of the invariant due to elastic deformation is represented as the sum of two scalars, one of which depends on the average value of the relative lengths of the edges of the particles in the form of an infinitesimal parallelepiped, the second is equal to the standard deviation of these lengths from the average value. It is shown that each of the scalars can be represented in the form of two dimensionless kinematic parameters of elastic energy, which participate in different ways in the implementation of the law of conservation of energy. One part of the elastic energy passes into kinetic energy and participates in the implementation of the law of conservation of energy for the body as a whole, considering external forces. The second part is not converted into kinetic energy but changes the deformed state of the particles in accordance with the equations of motion while maintaining the same level of the part of the elastic energy of the particles used for this. The kinematic parameters differ from the volume density of the corresponding types of energy by a factor equal to the elastic modulus, which is directly proportional to the density and heat capacity of the material and inversely proportional to the volume compression coefficient. Transverse, torsional, and longitudinal vibrations are considered free and under resonance conditions. The mechanisms of transformation of forced vibrations into their own after the termination of external influences and resonance at the superposition of free and forced vibrations with the same or similar frequency are considered. The formation of a new free wave at each cycle with an increase in the amplitude, which occurs mainly due to internal energy sources, and not external forces, is justified.

Understanding the physical properties of ultramafic rocks is important for evaluating awide variety of petrologic models of the oceanic lithosphere, particularly upper mantle and lower crust. Hydration of oceanic peridotites results in increasing serpentine content, which affects lithospheric physical properties and the global bio/geochemical cycles of various elements. In understanding tectonic, magmatic and metamorphic history of the oceanic crust, interpreting seismic velocities, rock composition and elastic moduli are of fundamental importance. In this study we show that as serpentine content increases, density decreases linearly with a slope of 7.85. We also correlate increase in serpentine content with a linear decline in shear, bulk and Young’s moduli with slopes of 0.48, 0.77, 0.45 respectively. Our results show that increase in serpentine content of lower crust and forearc mantle could decrease elasticity of lithospehere and result in break-offs. Therefore tectonic processes at peridotite rich slow spreading ridges may be strongly affected by serpentine content, particularly serpentinization may be responsible for discontinuities in thin crust, and formation of weak fault zones.

The construction of a house with a stage structure is the uniqueness of Banjarmasin's swampland. Particularly, foundations for swampy terrain necessitate special handling. Building material defects and the basic inability to modify the use and design of wood pillar foundations are the main causes of house building problems. The very limited capacity of a wooden pillar foundation makes house buildings collapse frequently. The aim of the study is to determine the weaknesses of the wooden pillar foundations by examining the indications of damage to the house structure. Field observation investigations, including housing and individual object observations, will be carried out at multiple construction sites in Banjarmasin (Indonesia) as part of this study. The way the data is presented is descriptive. A wooden pillar foundation, which is a frequently used foundation, has a limited load bearing capacity. Because that, there has been no related research that addresses the issue of how this foundation damage. The aim of the study is to determine the early signs of swamp building collapse in the wooden pillar foundations weaknesses by examining the indications of damage to the house structure. The weak construction of a wooden pillar foundation explains some indications of house building damage, such as broken wooden pillars and floor settlement. The existence of evidence that there is a broken 'sunduk’ element is one of the causes of damage to this foundation

The simplest elasticity model of foundation underlying a slender beam under flexure was conceived by Winkler, requiring local proportionality between soil reactions and beam deflection. Such an approach leads to well-posed elastostatic and elastodynamic problems, but, as highlighted by Wieghardt, it provides elastic responses which are not technically significant for a wide variety of engineering applications. Thus, Winkler's model was replaced by Wieghardt himself by assuming that the beam deflection is the convolution integral between soil reaction field and an averaging kernel. Due to conflict between constitutive and kinematic compatibility requirements, the corresponding elastic problem of an inflected beam resting on Wieghardt foundation results to be ill-posed. Modifications of the original Wieghardt model were proposed by introducing fictitious boundary concentrated forces of constitutive type, which are physically questionable, being significantly influenced on prescribed kinematic boundary conditions. Inherent difficulties and issues are overcome in the present research using a displacement-driven nonlocal integral strategy got by swapping input and output fields involved in Wieghardt's original formulation. That is, nonlocal soil reaction fields are output of integral convolutions of beam deflection fields with an averaging kernel. Equipping the displacement-driven nonlocal integral law with the bi-exponential averaging kernel, an equivalent nonlocal differential problem, supplemented with non-standard constitutive boundary conditions involving nonlocal soil reactions, is established. As a key implication, the integro-differential equations governing the elastostatic problem of an inflected elastic slender beam resting on displacement-driven nonlocal integral foundation are replaced with much simpler differential equations supplemented with kinematic, static and new constitutive boundary conditions. The proposed nonlocal approach is illustrated by examining and analytically solving exemplar problems of structural engineering. Benchmark solutions for numerical analyses are also detected.

This paper considers target characterization and recognition in radar images with keypoint-based local descriptor. Most of the preceding works rely on the global features or raw intensity values, and hence produce the limited recognition performance. Moreover, the global features are sensitive to the real-world sources of variability, such as aspect view, configu-ration, and incidence angle changes, clutter, articulation, and occlusion. Keypoint-based local descriptor was developed as a powerful strategy to address invariance to contrast change and geometric distortion. This property inspires us to investigate whether the family of local features are relevant for radar target recognition. Most of the preceding works typically devote to finding the correspondences between a collected image and a reference one. The representative applications include image register and change detection. Little work was pursued to target recognition in SAR images. This is because the huge number of local descriptors resulting from radar images make the computational cost and memory consumption unacceptable. To handle the problems, this paper develops two families of methods. The proposed methods are used to achieve target recognition by means of local descriptors. Our first solver refers to building multiple linear regression models, and addresses the problem by the theory of sparse representation. The second scheme rebuilds a new feature by the feature quantization skill, from which the inference can be drawn. Multiple comparative studies are pursued to verify the performance of detectors and descriptors popularly used. The source code was publicly released on https://ganggangdong.github.io/homepage/.

Virtual reality experiences are frequently created using game engines, yet they are not simple for novices and unskilled professionals who don’t have programming and 3D modeling skills. Concurrently, there is a knowledge gap in software project design for intuitive virtual reality authoring tools, which were supposed to be easier to use. This work compiles design guidelines derived from a systematic literature review to contribute in the development of more intuitive virtual reality authoring tools. We searched the Scopus and Web of Science databases for works published between 2018 and 2021 and discovered 14 papers. We compiled 14 requirement and feature design guidelines, such as Visual Programming, Immersive Authoring, Reutilization, Sharing and Collaboration, Metaphors, and Movement Freedom, among others. The collected guidelines have the potential to either guide the development of new authoring tools or to evaluate the intuitiveness of existing tools. Furthermore, they can also support the development of the metaverse, since virtual content creation is one of its bases.

The calibration of three-dimensional (3D) coordinates in augmented reality (AR) systems is a complex activity. It involves the recognition of environmental characteristics and technology that models the 3D space of the device, determining its position and orientation. In the industrial environment, it is common for AR applications to cover large spaces, making it difficult to maintain attributes such as precision and accuracy. The set of sensors and mapping algorithms available in HoloLens stimulate the development of virtual reality (VR) applications, in particular localization techniques. This study proposes calibration models of the 3D coordinates of the HoloLens for indoor industrial environments. The performance of tests in a relevant environment provides data necessary to evaluate the performance of the proposed models in terms of precision and accuracy in determining point coordinates in the study environment. The results show improvements in determining the axes that define the 3D space, with a direct influence on the position of the points observed in the experiment

Exposure to vaccine lipid nanoparticles, mRNA, adenoviral DNA, and or Spike protein from one of the approved Covid-19 vaccines, or through secondary exposure, as through blood transfusion, is a potential source of harm. Blood reactions are an acknowledged side-effect of Covid-19 vaccination, not limited to hemolysis, paroxysmal nocturnal hemoglobinuria, chronic cold agglutinin disease, immune thrombocytopenia, haemophagocytosis, hemophagocytic lymphohistiocytosis, and many other blood related conditions. The observation of adverse events has motivated investigation into the cardiovascular mechanisms of harm by Covid-19 vaccines, and the biodistribution of vaccine contents. Biodistribution may not be limited to the body of the vaccine recipient, as a growing body of evidence demonstrates the possibility of secondary exposure to vaccine particles. These can be via bodily fluids and include the following routes of exposure: blood transfusion, organ transplantation, breastfeeding, and possibly other means. As covid-19 vaccines are associated with an increased risk of stroke, the persistence of vaccine artifacts in the blood presents a possible threat to a recipient of a blood donation from a vaccinated donor who suffered from vaccine induced thrombosis or thrombocytopenia. (VITT) We assess the feasibility and significance of these risks through an overview of the case report literature of blood disorders in vaccinated individuals, pharmacovigilance reports from the US Vaccine Adverse Events Reporting System (VAERS) and a meta-analysis of the available literature on organ transplants from vaccinated organ donors. Our analysis establishes biological mechanistic plausibility, a coherent safety signal in pharmacovigilance databases for secondary vaccine contents exposure (for the cases of blood transfusion and breastfeeding) and also an elevated level of adverse events in organ transplants from VITT-deceased donors, echoing increases in organ transplantation related complications seen in national statistics for some countries. Secondary exposure to vaccine artifacts is a potential explanation for some of the cases put forth, and requires a deeper investigation.

Pharmacists must acquire the necessary knowledge to provide better drug therapy to patients. In other words, educational programs need to facilitate behavioral changes among pharmacists. Therefore, this study aimed to evaluate how the behavior of pharmacists changed after attending a palliative care educational program. We conducted a web-based questionnaire survey examining the behavior of pharmacists regarding palliative care before participating in the program, two months after participating in the program, and eight months after participating in the program, to determine the behavior and changes over time. For all questions, scores were higher at two and eight months after attending the program than before attending the program (P &lt;0.05). In addition, no significant difference was observed between two and eight months after attending the program for all questions (P =0.504-1.000). The knowledge gained from the educational program was used to repeatedly intervene with patients with cancer, to address the various symptoms they experienced and maintain their behavior. The proven effectiveness of this program serves as a stepping stone for a nationwide rollout across Japan’s 47 prefectures.

Precision medicine (PM), also termed stratified, individualised, targeted or personalised medicine, embraces a rapidly expanding area of research, knowledge, and practice. It brings together two emerging health technologies to deliver better individualised care: the many “-omics” arising from increased capacity to understand the human genome; and “big data” and data analytics including Artificial Intelligence (AI). PM has the potential to transform an individual’s health, moving from population-based disease prevention to more personalised management. There is however a tension between the two, with a real risk that this will exacerbate health inequalities and divert funds and attention from basic healthcare requirements leading to worse health outcomes for many. All areas of medicine should consider how this will affect their practice, with PM now strongly encouraged and supported by government initiatives and research funding. In this review we discuss examples of PM in current practice and its emerging applications in primary care, such as clinical prediction tools that incorporate genomic markers and pharmacogenomic testing. We look towards potential future applications and consider some key questions for PM including evidence of real-world impact, its affordability, the risk of exacerbating health inequalities, and the computational and storage challenges of applying PM technologies at scale.

This study aimed to investigate the potential of Cord Blood Stem Cell-derived exosome vesicles (CBSC-EVs) in regulating cancer growth and preventing cellular damage. The study aimed to examine the effects of CBSC-EVs on CHL1 cancer cells and healthy fibroblasts. The study results reveal that CBSC-EVs have an anti-cancer/antioxidant effect on CHL1 cancer cells without inducing any toxic effects on healthy lymphocytes. Further analysis of CBSC-EVs revealed the presence of seven miRNAs (noncoding RNA molecules), including three from the Let 7 family, two from the Let 5 family, and two novel miRNAs. The function of the novel miRNAs was the main focus of the study. To assess the efficacy of CBSC-EVs, CHL1 cells (a type of malignant melanoma cell line) and human fibroblasts were grouped into different treatments. One group of those cell lines were treated with CBSC-EVs, and in the second group, the cells were transfected with either miRNA inhibitor Novel 1 (miRNA IN1) plus CBSC-EVs or miRNA inhibitor Novel 2 (miRNA IN2) and CBSC-EVs to knock down those novel miRNAs in the CBSC-EVs. Therefore, by comparing these groups, the function of novel miRNAs is more understandable. In this study, the Comet assay was employed to evaluate cancer cells' DNA damage and CCK8 to measure cell viability. The findings revealed that CBSC-EVs caused an increase in DNA damage in CHL1 cells compared to cells without treatment (p

Variability is the predisposition of the elements in systems to assume different values over time and space. In biology, the variability is basic to explain differences and development in organisms but in the fields of scientific and technological information, the effects of variability on evolutionary dynamics of disciplines and technologies are unknown. In a broad analogy with the principles of biology, the variability within research fields can be a central argument to explain trajectories in scientific development and technological evolution. The purpose of the present study is to see whether statistical evidence supports the general hypothesis that the rate of growth in technologies can be explained by the level of variability in scientific fields and with this principal goal to analyze the relation between scientific variability and rate of growth in technologies. Proposed hypothesis of scientific variability here endeavors to explain basic sources of scientific development and technological evolution to lay the foundations for a general theory. The test here is based on emerging research fields of quantum technologies: Quantum Imaging, Quantum Meteorology, Quantum Sensing and Quantum Optics. A preliminary statistical evidence seems in general to support the hypothesis stated that the rate of growth in technological fields can be explained by the level of scientific variability in research fields, measured with relative entropy index. Nonparametric correlation based on Spearman’s rho shows a positive coefficient of 0.80 of these variables; linear model of the rate of technological growth = f(scientific variability) reveals a coefficient of regression equal to 1.63 (R²=0.60). Findings here suggest a general law that scientific variability positively drives scientific development and technological evolution. In particular, a higher variability within research fields can support scientific development and a high rate of growth in technological evolution (measured with scientific and technological information). Proposed hypothesis of scientific variability is especially relevant in environments of rapid change to explain determinants and dynamics of technological change within a general theoretical framework that supports technological management and forecasting of promising innovations.

Dielectric elastomers, such as thermoplastic polyurethanes (TPU), are widely used as dielectric layer, emulation layer and substrate of flexible and stretchable devices. To construct capacitors and actuators that work stably upon deformation, it has become an urgent need to investigate the evolution of dielectricity under stress and strain. However, the lack of effective methods for estimating the dielectric constant of elastomers under strain poses a big challenge. This article reports a device for in-situ measuring the dielectric constant of TPU under strain. It is found that upon stretching TPU to a strain of 400%, its dielectric constant decreases from 8.47 to 2.94. In addition, combined Fourier-transform infrared spectroscopy, X-ray scattering technique, and atomic force microscopy have been utilized to characterize the evolution of microstructure under strain. The investigation under tensile strain reveals that a decreased density and average size of polarized hard domains, along with a tendency of the molecular chains to align in parallel with the tensile stress. The evolution of the microstructures results in a reduction of the dielectric constant parallel to the electric field in TPU. Our work provides valuable experimental reference for improving the stability of flexible sensors and actuators based on dielectric elastomers.

This paper deals with the viscoelastic behavior during crystallization and melting of semicrystalline polymers with the aim of later modeling the residual stresses after processing in case where crystallization occurs in quasi static conditions (in additive manufacturing for example). Despite of an abundant literature on polymer crystallization, the current state of scientific knowledge does not yet allow ab initio modeling. Therefore, an alternative and pragmatic way has been explored to propose a first approximation of the impact of crystallization and melting on the storage and the loss moduli during crystallization-melting-crystallization cycle. An experimental approach, combining DSC, optical microscopy and oscillatory shear rheology was used to define macroscopic parameters related to the microstructure. These parameters have been integrated into a phenomenological model. Isothermal measurements were used to describe the general framework, and crystallization at a constant cooling rate was used to evaluate the feasibility of a general approach. It can be concluded that relying solely on the crystalline fraction is inadequate to model the rheology. Instead accounting for the microstructure at the spherulitic level could be more useful. Additionally, the results obtained from the experiments help to enhance our understanding of the correlations between crystallization kinetics and its mechanical effects.

In the last decade, sub-Saharan African countries have taken various measures to plan for and adapt to floods in order to reduce exposure and its impacts on human health, livelihoods and infrastructure. Measuring the effects of such initiatives on social resilience is challenging as it requires to combine multiple variables and indicators that embrace thematic, spatial and temporal dimensions inherent to the resilience thinking and concept. In this research, we apply a before-after-control-intervention (BACI) evaluation to empirically measure the impacts of the “Live with Water” (LWW) project on suburban households in Dakar, Senegal. We developed a resilience index that combines anticipatory, adaptive and absorptive capacity – considered as structural dimensions – with the concept of transformative capacity – considered as a temporal reconfiguration of the first three dimensions. Our finding let us estimate that the project increased the absorptive and the anticipatory capacities by 10.61% and 4.61%, respectively. However, adaptive capacity remained unchanged. This may be explained by the fact that the programme was more successful in building drainage and physical infrastructures, rather than improving multi-level organisations and strategies to cope with existing flood events. Further flood resilience program should better combine engineering approaches with institutional change and livelihood support to poor urban dwellers.

Gol'denveizer's problem of a torus has been analyzed by Audoly and Pomeau (2002) and Sun (2021). However, all of the investigations of Gol'denveizer's problem of an elastic torus have been linear. In this paper, the finite element method is used to more accurately address this problem. Furthermore, Sun (2021) cannot be solved by nonlinear analysis. We research the nonlinear mechanical properties of Gol'denveizer's problem of circular and elliptic tori, and relevant nephograms are given. We study the buckling of Gol'denveizer's problem of an elastic torus, and propose failure patterns and force-displacement curves of tori in the nonlinear range. Investigations reveal that circular tori have more rich buckling phenomena as the parameter a increases. Gol'denveizer's problem of the buckling of an elliptic torus is analyzed, and we find a new buckling phenomenon called a "skirt." As a/b increases, the collapse load of an elliptic torus of the Gol'denveizer problem is enhanced gradually.

Principle of memristor presented by Leon Chua and time reversal based non-linear elastic wave spectroscopy (TR-NEWS) which can be applied to acoustic tomography are reviewed. Correlation of acoustic or electromagnetic nonlinear waves and its time reversed wave can produce strong signal. Materials like transducer or biological skin can be assumed to be composed of a large number of small elastic unit: hysteretic elementary unit (HEU), and one can take a HEU as a memristor whose operation depends on time. Relation between TR-NEWS and solitonic wave in fluid, and relation between decomposition of time reversal operator (DORT) and chaotic oscillation are discussed.

In northern Canada where permafrost is prevalent, a shortage of accessible, affordable, and high-quality housing has been ongoing for decades. Design of foundations in permafrost presents unique engineering challenges due to permafrost soil mechanics and climate change. There is no specific design code for pile or shallow foundations in northern Canada. Consequently, the design process heavily relies on the expertise and experience of Arctic geotechnical engineers who have specialized knowledge in this field. Therefore, a comprehensive review of the practice or literature in foundation design in the Arctic would be necessary. The main objective of this review paper is to provide an overview of the common foundations in permafrost and the techniques adopted to counteract the effects of frozen soils. This study conducted a literature review of state-of-the-art practices on deep and shallow foundations used in northern Canada, including common steel pipe piles and thermosyphons. The review summarized the current principles, including adfreeze strength, creep settlement, and frost heave, used in the foundation design in permafrost. Then this paper summarized the findings from interviewing several engineers or professionals who have experiences in the design of foundations in permafrost. The interviews revealed the technical and non-technical aspects of foundation design practice in northern Canada. Lastly, in order to demonstrate the design methods, the paper presented two examples where screw piles and steel pipe piles were designed to support a residential building in northern Canada, according to the state-of-practice criteria for adfreeze strength, long term settlement and frost heave.

The paper proposes a novel methodology for the stabilization of shallow foundations, with a simplified model combined with 3D Electrical resistivity tomography (ERT-3D) and conso- lidation injections. To determine its usefulness, the method has been applied in a case located in Estepona (southern Spain). The chosen tomography model is the dipole-dipole configuration, with an optimized distance between electrodes of 0.80 m for a better visualization of the foundation subsoil; with this parameterization, a total of 72 electrodes were installed in the analyzed case. In this work, the depth of the anomaly in the building's supporting subsoil was detected ranging from 2.00 m to 3.90 m deep. The study also delineates areas of high resistivity variations (50-1,000 Ω m) in the middle and eastern end of the field. These data have been validated and corroborated with a field campaign. The results of the ERT-3D monitoring are presented, once the investment data has been processed with the RES3DINV software, from the beginning to the end of the stabilization intervention. The novelty occurs with the interaction between the tomography and the foundation consolidation injections, until the final stabilization; very useful methodology in case of emergency consolidation, where there is a need to minimize damage to the building. Thus, people using this combined system; will be able to practically solve the initial anomalies of the subsoil that caused the damages, in a non-invasive way, considerably lowering the value of the resistivities.

This article introduces simulations of theoretical material with controlled properties for the evaluation of the effect of key parameters, as volumetric fractions, elastic properties of each phase and transition zone on the effective dynamic elastic modulus (Ed). The accuracy level of classical homogenization models was checked regarding the prediction of Ed. Numerical simulations were performed with finite element method (FEM) for evaluations of the natural frequencies and their correlation with Ed, through frequency equations. An acoustic test validated the numerical results and obtained the elastic modulus of concretes and mortars at 0.3, 0.5 and 0.7 water-cement ratios (w/c). Hirsch calibrated according to the numerical simulation (x = 0.27) exhibited a realistic behavior for concretes of w/c = 0.3 and 0.5, with 5% error. Nevertheless, for w/c = 0.7, Ed approached Reuss model, similarly to theoretical triphasic materials. Hashin-Shtrikman bounds is not perfectly applied to theoretical biphasic materials under dynamic situations.

Quantum squeezing, an intriguing phenomenon that amplifies the uncertainty of one variable while diminishing that of its conjugate, may be studied as a time-dependent process, with exact solutions frequently derived from frameworks grounded in adiabatic invariants. Remarkably, we reveal that exact solutions can be ascertained in the presence of time-variant elastic forces, eschewing dependence on invariants or frozen eigenstates formalism. Delving into these solutions as an inverse problem unveils their direct connection to the design of elastic fields, responsible for inducing squeezing transformations onto canonical variables. Of particular note, the dynamic transformations under investigation belong to a class of gentle quantum operations, distinguished by their delicate manipulation of particles, thereby circumventing the abrupt energy surges commonplace in conventional control protocols.

The motion of a circular elastic plate floating on the surface is investigated in the time–domain. The solution is found from the single frequency solutions and the method to solve for the circular plate is given using the eigenfunction matching method. Simple plane incident waves with a Gaussian profile in wavenumber space are considered and a more complex focused wave group is considered. Results are given for a range of plate and incident wave parameters are investigated. Code is provided to show how to simulate the complex motion.

Silica on Silicon is a major optical integration platform, while the emergent class of integrated Laser written circuits' platform offers additionally high customizability, and flexibility for rapid prototyping. However, the inherent waveguides' low core/cladding refractive index contrast characteristic compared to other photonic platforms in silicon or silicon nitride, sets serious limitations for on-chip efficient coupling with single photon emitters, like semiconductor nanowires with quantum dots limiting the applications in quantum computing. A new light coupling scheme proposed here overcomes this limitation providing means for light coupling >50%. The scheme is based on the incorporation of an optical microsphere between the nanowire and the waveguide, properly optimized and arranged in terms of: size, refractive index, distance of microsphere between nanowire and waveguide. Upon suitable design of the optical arrangement, the photonic nanojet emitted by the illuminated microsphere excites efficiently the guided eigenmodes of the input channel waveguide, thus launching light with high coupling efficiency. The method is tolerant in displacements, misalignments, and imperfections and is fabricationally feasible by current state of the art techniques. The proposed method enables the on-chip multiple single photon emitters' integration thus allowing the development of highly customizable and scalable quantum photonic integrated circuits for quantum computing.

Codium fragile, a green algae, exhibit biological properties. In this study, we examined the effect of Codium fragile extract (CFE) on dextran sulfate sodium (DSS)-induced colitis. As the administration of CFE increased, the proliferation of Akkermansia muciniphila, which is key player in metabolic and gastrointestinal disorders, increased. After CFE administration for 10 weeks, acetic acid was revealed as the major metabolite in mouse cecum and β-glucuronidase activity in mouse feces is decreased. Further, CFE significantly alleviates the acute intestinal injury induced by DSS administration, including DAI scores and colon length. MPO activity in the colon was significantly reduced in the CFE-fed group, which indicated that CFE could inhibit neutrophils infiltration and inflammation in mice. In conclusion, a protective effect of CFE against DSS colitis suggests its clinical use for IBD patients.

A full potential all-electron density functional method within generalized gradient approximation is used to investigate the electronic, elastic and transport properties of cubic copper sulphide and copper selenide. The electronic structure suggests metallic behavior with a zero energy band gap for both materials. Elastic property calculations suggest a stiff material with the bulk to shear modulus ratio of 0.35 and 0.44 for Cu2S and Cu2Se respectively. The transport properties were estimated using the Boltzmann transport approach. Seebeck coefficient, electrical conductivity, thermal conductivity, and power factor all suggest a potential p-type conductivity for Cu2S and n-type conductivity for Cu2Se.

Although solar photovoltaic (PV) system costs have declined, capital cost remains a barrier to widespread adoption. Do-it-yourself (DIY) system designs can decrease costs by about 50% by reducing labor costs, but if not attached to a building structure demand ground penetration for conventional footings. This is not technically and economically feasible at all sites. To overcome these challenges, this study details systems designed to eliminate drilling holes and pouring concrete. Two different designs for both fixed tilt and variable tilt PV racking are investigated to assess their structural integrity, constructability, and economic cost when fabricated with a ballast-supported foundation. The ballast-supported foundations are analyzed for eight such systems by proposing two separate ballast designs: one for single line of post systems, and one for double line of post systems built on a 4-kW basis. The results of the analysis found that both designs are slightly more expensive than typical in-ground concrete systems by 25%, but the overall DIY systems costs remain economically advantageous. Sensitivity analyses are conducted to show how modifications to the dimensions including clearances and distances between gabions influence the weight of the system and thus change the economic value of the design, so users can trade dimensional freedom for cost-savings, and vice versa. Overall, all the wood-based PV racking system designs provide users with cost-effective and easy DIY alternatives to conventional metal racking, and the novel ballast systems presented provide more versatility for PV systems installations.

Keywords: Amorphous-precipitate, Nitride, Morphological stability, Diffusion, Internal stresses, Modelling, Simulation

The evaluation of the piezoelectric properties of ferroelectric ceramics generally has a high level of uncertainty, due to incomplete poling, porosity, domain wall clamping and other effects. In addition, the poling process is often difficult and dangerous, due to the risk of breaking or damaging the sample. A method is described for the evaluation of the potential intrinsic piezoelectric response that a ceramic would have after full poling, without poling it. The method relies on the fact that any material undergoes an elastic softening below the ferroelectric transition temperature, whose magnitude can be expressed in terms of the intrinsic piezoelectric and dielectric coefficients of the material. Such a softening is equivalent to an electromechanical coupling, averaged over all the components due to the unpoled state of the sample, and can be deduced from a single temperature scan of an elastic modulus of a ceramic sample, spanning the ferroelectric and paraelectric states. The strengths, limits and possible applications of the method are discussed.

A new approach to the measurement with elastic lidar of depolarization produced by atmospheric aerosols is presented. The system uses two different telescopes: one for depolarization measurements and another for total-power measurements. The system architecture and principle of operation are described. The first experimental results are also presented, corresponding to a collection of atmospheric conditions over the city of Barcelona.

In this paper we will show that standard physics to a large degree consists of derivatives of a deeper reality. This means standard physics is both overly complex and also incomplete. Modern physics has typically started from working with first understanding the surface of the world, that is typically the macroscopic world, and then forming theories about the atomic and subatomic world. And we did not have much of a choice, as the subatomic world is very hard to observe directly, if not impossible to observe directly at the deepest level. Despite the enormous success of modern physics, it is therefore no big surprise that we at some point have possibly taken a step in the wrong direction. We will claim that one such step came when one thought that the de Broglie wavelength represented a real matter wavelength. We will claim that the Compton wavelength is the real matter wavelength. Based on such a view we will see that many equations in modern physics are only derivatives of much simpler relations. Second, we will claim that in today’s physics one uses two different mass definitions, one mass definition that is complete or at least more complete, embedded in gravity equations without being aware of it, as it is concealed in GM, and the standard, but incomplete, kg mass definition in non-gravitational physics. First, when this is understood, and one uses the more complete mass definition that is embedded in gravity physics, not only in gravity physics, but in all of physics, then one has a chance to unify gravity and quantum mechanics. Our new theory shows that most physical phenomena when observed over a very short timescale are probabilistic for masses smaller than a Planck mass and dominated by determinism at or above Planck mass size. Our findings have many implications. For example, we show that the Heisenberg uncertainty principle is rooted in a foundation not valid for rest-mass particles, so the Heisenberg uncertainty principle can say nothing about rest-masses. When re-formulated based on a foundation compatible with a new momentum that is also compatible with rest-masses, we obtain a re-defined Heisenberg principle that seems to become a certainty principle in the special case of a Planck mass particle. Furthermore, we show that the Planck mass particle is linked to gravity and that we can easily detect the Planck scale from gravity observations. The Planck mass particle is unique as it only lasts the Planck time, and in that very short time period it can only be observed directly from itself, and it therefore closely linked to absolute rest.

In order to improve the stiffness of the flexible robot,this paper proposes a variable-stiffness elastic actuator to improve the rigidity of flexible robots. The actuator integrates the working principles of a pneumatic drive, wedge structure, and particle blockage. the tensile stiffness of the actuator is nonlinearly negatively correlated with the air pressure because of the structural and material properties.The compressive stiffness and lateral stiffness increases nonlinearly as air pressure increases, being 3and 121 times greater at 0.17 MPa compared to 0 MPa, respectively. Beyond 0.17 MPa, the two stiffness of the actuator experiences incremental growth due to wedge impedance forces.

The dislocation density tensors of thin elastic shells have been formulated explicitly in terms of the Riemann curvature tensor. The formulation reveals that the dislocation density of the shells is proportional to KA3=2, where K is the Gauss curvature and A is the determinant of metric tensor of the middle surface.

We describe an interesting case report about a patient with hemophilia A with severe chronic elbow arthropathy who underwent multiple surgical because of his condition. We collected all the clinical and imaging findings, and we compared the decision-making flow chart and the surgery performed with the most recent indications, treatments and complications reported in the literature. The aim of this case report is to show how usually the hemophilic patient even if young usually comes to our attention from the beginning with complex and advance musculoskeletal disease. Elbow hemophilic arthropathy is a complex disease and the management in these patients could be more difficult than others because of the higher risk of complications rate after all surgical procedures, for this reason it’s very important to treat these patients in hub centers with expertise in well-coordinated multidisciplinary teams. The path from diagnosis to surgical treatment of hemophilic elbow arthropathy can be a risky one, as it happened in this case.

Salt marshes are globally important ecosystems, but many have been lost or transformed due to the impacts of global change. There have been attempts to broadly quantify salt marsh communities, especially the ubiquitous grasses which serve as foundation species such as Spartina alterniflora and Spartina patens, the latter of which is being lost due to sea level rise. However, few researchers have used high-resolution geospatial imagery to quantify fine-scale changes in the distribution of grasses or to track losses of S. patens. To address this issue, we utilized a simple and rapid method of classifying geospatial marsh imagery with cloud-based machine learning in Google Earth Engine (>92% accuracy for S. patens regardless of imagery age). Our methods allowed us to characterize full landscapes (two geospatially proximal areas, >7,000 ha each) of critical salt marshes on the New Jersey coast and to evaluate fine-scale (1-m) community transformations in response to global change with imagery from 2006 to 2019. Notably, one marsh experienced very little change while the other experienced an 81.17% (1,087 ha) loss of S. patens, illuminating disparate patterns of change for two geographically proximal ecosystems. Further exploration revealed an association in the loss of S. patens with increases in streamflow and total nitrogen content in the rivers that run through each marsh. These results signify the importance of broad-scale ecological studies that evaluate fine-scale community transformations and for management strategies that do not generalize across landscapes of an ecosystem-type.

Recent studies have shown that the mechanical properties of bioinspired periodic composite materials can be strongly influenced by finite deformation effects, leading to highly nonlinear static and dynamic behaviors at multiple length scales. For instance, in porous periodic nacre-like microstructures, microscopic and macroscopic instabilities may occur for a given uniaxial loading process and, as a consequence, wave attenuation properties may evolve as a function of the microstructural evolution, giving it the designation of metamaterials. The numerical outcomes provide new opportunities to design bioinspired soft composite metamaterials characterized by high deformability and enhanced elastic wave attenuation capabilities given by the insertion of voids and lead cores.

In post mortem analyses, SARS-CoV-2 was found in the middle ear of some, but not all patients with COVID-19 disease. It is not clear whether SARS-CoV-2 penetrated the ear passively post mortem, or existed in the middle ear of living patients during, and perhaps also after infection. This study investigates whether SARS-CoV-2 can be found in the middle ear of living patients during ear surgery. Swabs from the nasopharynx, the filter connected to the tracheal tube and secretion from the middle ear were collected during middle ear surgery. All samples were tested for the presence of SARS-CoV-2 with PCR. History of vaccination, COVID-19 and contact with SARS-CoV-2-positive individuals were recorded preoperatively. Postoperative SARS-CoV-2 infection was noted at the follow-up visit. Overall 63 participants (62%) were children and 39 (38%) were adults. SARS-CoV-2 was found in the middle ear and in the nasopharynx of two and four CovEar Study participants, respectively. The filter connected to the tracheal tube was sterile in all cases. Cycle threshold (ct) values of the PCR test were between 25.94 and 37.06. SARS-CoV-2 penetrates into the middle ear of living patients and can be found in asymptomatic patients. The presence of SARS-CoV-2 in the middle ear may have implications for ear surgery and can pose a risk of infection for operating room staff. It may also directly affect the audio-vestibular system.

Angiogenesis is a critical physiological response to ischemia but becomes pathological when dysregulated and driven excessively by inflammation. We recently identified a novel angiogenic role for tripartite-motif-containing protein 2 (TRIM2) whereby lentiviral shRNA-mediated TRIM2 knockdown impaired endothelial angiogenic functions in vitro. This study sought to determine whether these effects could be translated in vivo and to determine the molecular mechanisms involved. CRISPR/Cas9-generated Trim2–/– mice that underwent a periarterial collar model of inflammation-induced angiogenesis exhibited significantly less adventitial macrophage infiltration relative to wildtype (WT) littermates, concomitant with decreased mRNA expression of macrophage marker Cd68 and reduced adventitial proliferating neovessels. Mechanistically, TRIM2 knockdown in endothelial cells in vitro attenuated inflammation-driven induction of critical angiogenic mediators, including nuclear HIF-1α, and curbed the phosphorylation of downstream effector eNOS. Conversely, in a hindlimb ischemia model of hypoxia-mediated angiogenesis, there were no differences in blood flow reperfusion to the ischemic hindlimbs of Trim2–/– and WT mice despite a decrease in proliferating neovessels and arterioles. TRIM2 knockdown in vitro attenuated hypoxia-driven induction of nuclear HIF-1α but had no further downstream effects on other angiogenic proteins. Our study has implications for understanding the role of TRIM2 in the regulation of angiogenesis in both pathophysiological contexts.

Critically ill patients treated in the intensive care unit (ICU) can present many abdominal conditions that need a prompt diagnosis and timely treatment because of their general frailty. Clinical evaluation and diagnostic tools like ultrasound or CT scan are not reliable or feasible in these patients. Bedside laparoscopy (BSL) is a minimally invasive procedure that allows surgeons to assess the abdominal cavity directly in the ICU, thus avoiding unnecessary exploratory laparotomy or incidence related to intra-hospital transfer. We conducted a review of the literature to summarize the state-of-the-art of BSL. Medline, The Cochrane Central Register of Controlled Trials (CENTRAL), and Scopus databases were utilized to identify all relevant publications. Indications, contraindications, technical aspects, and outcomes are discussed. The procedure is safe, feasible, and effective. When other diagnostic tools fail to diagnose or exclude an intra-abdominal condition in ICU patients, BSL should be preferred over exploratory laparotomy.

The emerging advancements in separation and classification of various biological matters (e.g., living cells and proteins) using magnetic levitation (MagLev) technology have proven to be effective for improving disease diagnostics. MagLev technique has the capacity to detect and separate useful diagnostic biomarkers from biocomplex environments (e.g., blood and plasma), minimizing the unpleasant daunting task of sample preparations and labeling procedures. Here, we demonstrate the capability of this technique combined with image analysis and machine learning approaches for discriminating the various types of multiple sclerosis (MS) as an important model disease. To arrive at a systematic expert system, we combined robust statistical analysis with machine learning to (1) detect and remove outliers from the raw MagLev image datasets; then (2) process the images and output a low dimensional representation of massive data without losing the main statistical features; and finally (3) predict the MS clinical disease type (Relapsing-Remitting, Primary–Progressive, or Secondary–Progressive) using a classifier. This is expected to improve MS diagnostics since the current practices rely solely on clinical observation and central nervous system imaging, making management approaches are often reactional and inefficient. Thus, there is a need to identify the disease type early on. MagLev is expected to improve MS diagnostics, thereby aiding in prognosis and guiding adequate treatment choices before the patient exhibits signs of permanent neurological deficits.

The deepening of electricity reform results in increasingly frequent auctions and the surge of generators, it becomes difficult to analyze generators’ behaviors. Since it’s hard to find analytical market equilibriums, approximate equilibriums were obtained instead in previous studies by market simulations, which are strict to initial estimations and simulation results are chaotic in some cases. In this paper, a multi-unit power bidding model is proposed to reveal the bidding mechanism under clearing pricing rule by employing auction approach, for which initial estimations are non-essential. Normalized bidding price is introduced to construct generator's price-related bidding strategy. Nash equilibriums are derived depend on the marginal cost and the winning probability which are computed from bidding quantity, transmission cost and demand distribution. Furthermore, we propose a comparative analysis to explore the impact of uncertain elastic demand on the performance of the electricity market. The result indicates that, there exists market power among generators leading to social welfare decreases even under competitive conditions but elastic demand is an effective way to restrain generators’ market power. The feasibility of the models is verified by a case study. Our work provides decision support for generators and a direction for improving market efficiency.

This research is completed in development of researches devoted to relations between elastic modulus (MoE) and thermal expansivity (CTe) of different materials. This study experimentally confirmed the relation of MoE and CTe for thermosetting polymers and FRPs both under normal and heating temperatures. As the thermosetting polymers, the epoxy compositions were used and glass fiber and mineral additives for FRP. The experiment was based on dilatometric and elastic deformations’ testing. Also, the relaxation model of MoE/CTe was proposed, that is based on physical properties of polymers’ supramolecular structures. The comparative analyzing of MoE/CTes’ different models is done. The most accurate models are determined, and the relaxation model has demonstrated the high accuracy.