Background: Existing human cell immortalization methods made the cells obtain oncogenesis phenotype and/or caused the cells gain and/or lose chromosomes. Immortalized normal human T cells lines provide critical in vitro models for basic research and therapeutic products development.Methods: We utilized a CRISPR/Cas9 system to replace a single copy of the exon 2 of the cell cycle inhibitor gene CDKN2A (encoding p16 and p14 proteins) with a single copy of human telomerase reverse transcriptase (hTERT) to immortalize human primary CD8⁺ T cells (hCD8⁺T-TERT). By using Cas9 protein and low donor DNA copies/cell, we successfully immortalized hCD8⁺T cells with a single copy of hTERT transgene, which also avoided uncontrolled insertion of Cas9 gene and guide RNA vector.Results: Human primary CD8+ cells were immortalized and expanded more than 2.6 × 10⁷ times. Characterization of the cells revealed that the immortalized CD8⁺ T-TERT cells retained most of the cell surface markers and normal karyotype. The CD8⁺ T-TERT cells also retained the dependence of IL-2 and CD3/CD28 activator for survival and expansion.Conclusion: we established a stable immortalized CD8⁺ T cell line that had a phenotype consistent with T cells and will be a useful research model.

Antimicrobial resistance (AMR) is a worsening global health crisis that has arisen due to antibiotic overuse and misuse. Antibiotic resistance renders standard treatments less effective, making it difficult to control some infections, thereby increasing morbidity and mortality. Medicinal plants are sustainable treatment options that are becoming increasingly important as antibiotics lose their efficacies. The present study evaluates the antibacterial activity of aqueous, methanolic and ethyl acetate extracts prepared using Terminalia bellirica and Terminalia chebula fruit against six bacterial pathogens using disc diffusion and broth microdilution assays. The aqueous and methanol extracts of T. bellirica and T. chebula showed substantial zones of inhibition (ZOIs) against S. aureus and MRSA. The activity against those bacteria was determined to be strong, with minimum inhibitory concentrations (MIC) ranging from 94 µg/mL to 392 µg/mL. Additionally, the T. bellirica methanolic extract showed noteworthy antibacterial activity against E. coli and an ESBL E. coli strain (MIC values of 755 µg/mL for both). The aqueous T. bellirica and T. chebula extracts also inhibited K. pneumoniae growth (MIC values of 784 µg/mL and 556 µg/mL respectively), whilst the methanolic extracts of these plants also inhibited ESBL K. pneumoniae growth (MIC values of 755 µg/mL and 1509 µg/mL respectively). Eighteen additive interactions were observed when extracts were combined with reference antibiotics. Notably, strong antagonistic interactions occurred when any of the extracts were mixed with polymyxin B. All extracts were subjected to LC-MS analysis, revealing several interesting flavonoids and tannins, including 6-galloylglucose, 1,2,6-trigalloyl-β-D-glucopyranose, 6-O-[(2E)-3-phenyl-2-propenoyl]-1-O-(3,4,5-trihydroxybenzoyl)-β-D-glucopyranose, propyl gallate, methyl gallate, sanguiin H4, hamamelitannin, pyrogallol, gallic acid, ellagic acid, chebulic acid, and chebuloside II. All extracts were nontoxic when tested in brine shrimp assays. This lack of toxicity, combined with their antibacterial activities suggests that these plant species may be promising sources of antibacterial compound(s) that warrant further study.

The definition of UTC in 1972 balanced the needs of the time and frequency community for a universal time scale that was traceable to the definition of frequency in the SI system of units with the needs of the astronomical community for a time scale that was closely linked to UT1, a time scale related to the rotation of Earth. The balance between these two considerations has changed very significantly since 1972, and there is widespread agreement that the method of relating UTC to UT1 should be changed by increasing the maximum tolerance between the two scales to more than the current limit of 0.9 s. I propose to realize this decision by means of an algorithmic adjustment process based on the variation in the length of the day over the previous centuries. I use these historical data to extrapolate the length of the day for a century into the future, and to compute a periodic rate adjustment to UTC based on this extrapolation. The adjustment process will not use time steps. The magnitude of the periodic rate adjustment will be re-considered every century, but the basic adjustment algorithm will not change. I suggest a maximum tolerance between UT1 and UTC that is large enough to absorb the irregular and unpredictable variations in the length of the day with respect to the long-term average increase in this value but plays no role in determining the parameters of the adjustment process that is proposed. I also propose that the adjustment be implemented at 12 UTC on 1 January since that is closest to a universal holiday in all time zones.

Laparoscopic cholecystectomy (LC) is the gold standard of treatment for symptomatic gallstone disease. The aim of this study is to determine if postoperative opiate use is reduced with trans-versus abdominus plane (TAP) and rectus sheath (RS) regional anaesthetic blocks compared to port site local anaesthetic (LA) infiltration. A prospective, randomised cohort study was con-ducted of adult patients who underwent an emergency LC between 25 April 2022 and 25 May 2023. 40mls of 0.375% ropivacaine was infiltrated as either TAP and RS blocks or to port sites. Patient demographics, operative data and postoperative opioid use were collected from the med-ical record. 138 patients were enrolled in this study; 73 patients allocated to the LA to port sites cohort (52.9%) and 65 patients in the TAP and RS cohort (43.5%). The most common indication for surgery was acute cholecystitis. The average amount of opiate analgesia use was 115.2mg in the LA group compared to 61.2mg in the TAP and RS group (p

Bearing component damage contributes significantly to rotating machinery failures. It is vital for the rotor-bearing system to be in good condition to ensure proper functioning of the machine. Over recent decades, extensive research has been devoted to the condition monitoring of rotational machinery, with a particular focus on bearing health. This paper provides a comprehensive literature review of recent advancements in intelligent condition monitoring technologies for rolling element bearings. Fundamental monitoring strategies are introduced, covering various sensing, signal processing, and feature extraction techniques for detecting defects in rolling element bearings. While vibration-based monitoring remains prevalent, alternative sensor types are also explored, offering complementary diagnostic capabilities or detecting different defect types compared to accelerometers alone. Signal processing and feature extraction techniques, including time domain, frequency domain, and time-frequency domain analysis, are discussed for their ability to provide diverse perspectives for signal representation, revealing unique insights relevant to condition monitoring. Special attention is given to information fusion methodologies and the application of intelligent algorithms. Multisensor systems, whether homogeneous or heterogeneous, integrated with information fusion techniques, hold promise in enhancing accuracy and reliability by overcoming limitations associated with single sensor monitoring. Furthermore, the adoption of AI techniques, such as machine learning and metaheuristic optimisation, has led to significant advancements in condition monitoring, yielding successful outcomes in various studies. Finally, avenues for further advancements to improve monitoring accuracy and reliability are identified, offering insights into future research directions.

This research integrates systemic and participatory techniques to model the Russian Federation construction innovation system. Understanding this complex construction innovation system, and determining the best levers for enhancing it, requires the dynamic modelling of a number of factors such as flows of resources and activities, policies, uncertainty and time. To build the foundations for such a dynamic model, the employed study method utilised an integrated stakeholder-based participatory approach coupled with structural analysis (MICMAC - Matrice d'Impacts Croisés Multiplication Appliquée à un Classement Cross-Impact Matrix). This method identified the key factors of the Russian Federation construction innovation system, their causal relationship (i.e. influence/dependence map) and ultimately a causal loop diagram. The generated model reveals pathways to improving construction innovation in the Russian Federation, and underpins the future development of an operationalised systems dynamic model.

Intracellular aggregates of the alpha-synuclein protein result in cell loss and dysfunction in Parkinson’s disease and atypical parkinsonism, such as multiple system atrophy and dementia with Lewy bodies. Each of these neurodegenerative conditions, known collectively as alpha-synucleinopathies, may be characterized by a different suite of molecular triggers that initiate pathogenesis. The mechanisms whereby alpha-synuclein aggregates in turn mediate cytotoxicity also remain to be fully elucidated. However, recent studies have implicated the cell-to-cell spread of alpha-synuclein as the major mode of disease propagation between brain regions during disease progression. Here, we review the current evidence for different modes of alpha-synuclein cellular release, movement and uptake, including exocytosis, exosomes, tunnelling nanotubes, glymphatic flow and endocytosis. A more detailed understanding of the major modes by which alpha-synuclein pathology spreads throughout the brain may provide new targets for therapies that halt the progression of disease.

The characteristics of gap plasmon formed by nanoparticle-on-mirror (NPOM) structure composed of metal nanoparticles (MNP) and metal thin films have aroused the interest of various optoelectronic devices. The resonant spectrum obtained by the internal coupling effect of gap can be flexibly controlled by the polarization of incident light and the thickness of the dielectric layer between MNP and metal thin films. We have theoretically studied the resonance spectra of polarization-dependent gold ellipsoidal nanoparticles (GENP) and gold thin films in the gap region of NPOM structures. GENP and gold thin films are separated by a dielectric layer with a refractive index of 1.36. We observe that the intensity of the local electric field resonance peak in the gap region is inversely proportional to the polarization angle. Similarly, the intensity of the local electric field resonance peak in the gap region is inversely proportional to the thickness of the dielectric layer. We have obtained more than 2200 V/m local electric field intensity (dielectric layer thickness 0.3nm). Finally, the resonant peak wavelength of the electric field in the gap region of the NPOM structure is also controlled by the polarization angle of the incident light and the thickness of the dielectric layer.

A novel determination method using flow-through cartridge purification and ultra-high-performance liquid chromatography coupled to tandem mass spectrometry (UPLC-MS/MS) was developed for the identification and quantification of 30 mycotoxins (aflatoxin B1, B2, G1, G2, sterigmatocysin, T-2 toxin, diacetoxyscirpenol, roquefortine C, methylergonovine, ergocornine, lysergol, enniatin A, enniatin A1, enniatin B, enniatin B1, beauvericin, deoxynivalenol, 3-acetylDeoxynivalenol, 15-acetylDeoxynivalenol, patulin, verruculogen, neosolaniol, gliotoxin, HT-2 toxin, wortmannin, zearalenone, α-zearalenol, β-zearalenol, α-zearalanol, and β-zearalanol) in feedstuffs. Mycotoxins were extracted from sample by 0.1% formic acid aqueous solution/acetonitrile (16/84 v/v), then purified by a Cleanert® MC clean-up column. As a result, the pigments and other matrices were efficient removed from the sample extract solution. The purified eluate was collected, then evaporated and redissolved by 0.1% formic acid aqueous solution/acetonitrile (70:30 v/v) for UPLC-MS/MS detection. A BEH Shield RP18 chromatographic column was employed for separation of 30 mycotoxins in a total of 14 min. Multiple-reaction monitoring (MRM) mode was applied for qualitative and quantitative analysis, and matrix calibration curves obtained with the external-standard method was used for quantitation of target analytes. Under optimized conditions, the linearity range was from 2 to 1000 ng/g, and the limit of quantification of the developed method was from 2 to 50 ng/g. The recoveries of 30 mycotoxins spiked in urine samples were from 72.0% to 118.5%, and the relative standard deviation was below 20%. The method was also well approved by certified reference sample, and applied on the real feedstuff samples testing successfully.

Silver ion (Ag+) are recognized for their potent antibacterial properties; however, their utilization in food preservation is restricted by factors such as inadequate stability, a transient antibacterial impact, and the potential for human absorption. Hydrogel-based antibacterial agents are capable of exerting their antibacterial effects by establishing appropriate microenvironments, which facilitate the efficient delivery of antimicrobial molecules to the contaminated regions of food. In previous studies, we observed that chitosan (CS) and silver nitrate (AgNO3) were able to reduce Ag+ to silver nanoparticles (AgNPs) with enhanced antibacterial properties. This not only significantly extended the stability of the antibacterial agent but also demonstrated exceptional inhibitory capabilities against pathogenic bacteria, including common grape contaminants such as P. expansum, A. niger, and B. cinerea. Utilizing ultrasound-induced complexation technology, this study has successfully synthesized a chitosan-silver (CS-AgNPs) hydrogel. The efficacy of this hydrogel against the pathogenic fungus responsible for jujube black spot disease has been thoroughly investigated. The morphology structures of CS-AgNPs hydrogels were characterized by TEM, FTIR and UV-vis. The results indicated that AgNPs ranging from 80 to 110 nm were uniformly dispersed within the gel matrix and remained stable for extended periods at room temperature. In vitro antibacterial assays and fractional inhibitory concentration index (FICI) studies revealed that the pronounced antibacterial efficacy of the CS-AgNPs hydrogel was primarily attributed to the additive antibacterial effect of CS and AgNPs. These insights underscore the significant potential of CS-AgNPs hydrogels in combating fungal diseases of jujube, offering innovative strategies and materials for the management of agricultural pathogens.

Background: Developing patient-centric baseline standards that enable the detection of clinically significant outlier gene products on a genome-scale remains an unaddressed challenge required for advancing personalized medicine beyond the small pools of subjects implied by “precision medicine”. This manuscript proposes a novel approach for reference standard development to evaluate the accuracy of single-subject analyses of metabolomes, proteomes, or transcriptomes. Since distributional assumptions of statistical testing may inadequately model genome dynamics of gene products, the so-called significant results of previous studies may artefactually conflate with real signals. Model confirmation biases escalate when studies use the same analytical methods in the discovery sets and reference standards, as corroboration of results leads to an evaluation of reproducibility confounded with replicated biases rather than a measure of accuracy. We hypothesized that developing method-agnostic reference standards using effect-size and expression-level filtering of results, obtained from multiple discovery methods that are distinct from the one evaluated, would maximize the evaluation of clinical-transcriptomic signals and minimize statistical artefactual biases. We developed and released an R package “referenceNof1” to facilitate the construction of robust reference standards. Results: Since RNA-Seq data analysis methods often rely on binomial and negative binomial assumptions to non-parametric analyses, the differences create statistical noise and make the reference standards method dependent. In our experimental design, the accuracy of 30 distinct combinations of fold changes (FC) and expression levels (EL) were determined for five types of RNA analyses in two different datasets. This design was applied to two distinct datasets: breast cancer cell lines and a yeast study with isogenic biological replicates in two experimental conditions. In addition, the reference standard (RS) comprised all RNA analytical methods with the exception of the method testing accuracy. To mitigate for biased optimization of the RS parameters towards a specific analytical method, similarity between observed results of distinct analytical methods were calculated across all methods (Jaccard Concordance Index). The greatest differences were observed across diametric extremes. For example, filtering out differentially expressed genes (DEGs) using a fold change < 1.2 leads to a 50% increase in concordance between techniques when compared to results with FC > 1.2. Combining this FC cutoff with genes with mean expressions > 30 counts leads to a 65% increase in concordance in comparison to genes with expression levels < 30 counts and with FC < 1.2. Conclusions: We have demonstrated that comparing accuracies of different single-subject analysis methods for clinical optimization requires a new evaluation framework. Reliable and robust reference standards, independent of the evaluated method, can be obtained under a limited number of parameter combinations: fold change (FC) ranges thresholds, expression level cutoffs, and exclusion of the tested method from the RS development process. When applying anticonservative reference standard frameworks (e.g., using the same method for RS development and for prediction), a majority of the concordant signal between prediction and Gold Standard (GS) cannot be confirmed by other methods, which we conclude as biased results. Statistical tests to determine DEGs from a single-subject study generate many biased results that require subsequent filtering for increasing their reliability. Conventional single-subject studies pertain to one or a few measures in one patient over time [1]and need a substantial conceptual framework extension in order to address the tens of thousands of measures in genome-wide analyses of gene products. The proposed referenceNof1 framework addresses some of the inherent challenges in improving transcriptome scale single-subject analyses by providing a robust approach to constructing reference standards. Github: https://github.com/SamirRachidZaim/referenceNof1

Existing research indicates that mineralization of Carlin-type gold deposit is related to geological structures, but current studies mostly focus on the qualitative association, and lack quantitative analysis of the relationship between mineralization and structural features, which limits the potential for predictive mineral exploration. In this study, the Nibao Carlin-type gold deposit was selected as the research area to conduct three-dimensional geological modeling, spatial analysis, and three-dimensional prospectivity modeling. Spatial analysis revealed that the majority of gold ore bodies are situated near the main fault, with gold mineralization primarily occurring within a spatial range of approximately -80 meters to 20 meters from the main fault plane. This spatial distribution predominantly aligns in a SW-NE direction. Spatial characteristic extraction of fault slope indicators suggests that the slope angles are conducive to the migration and accumulation of ore-forming hydrothermal fluids, with ore body metal content rapidly increasing within an angle range of approximately 20° to 60°. The shape analysis of the mainfault indicates that the principal spaces of mineralization enrichment are within -10m to 20m of the fault plane undulations, where gold resources are concentrated in a relatively flat area. However, the degree of mineralization is more pronounced in the protruding sections than in the depressed areas. The areas with significant dip changes in faults display higher variations in orebody attitudes, with mineralization noticeably weaker in areas where the fault steepness changes markedly. Ore-bearing units exhibit significantly higher grades within the -17° to 3° interval of fault steepness transition. This interval also sees a rapid accumulation of gold resources. The Nibao gold mine's mineralization is derived from deep, ore-bearing hydrothermal fluids ascending along major fractures, precipitating, and accumulating in favorable ore-hosting spaces (faults, anticline cores) and lithological combinations (sedimentary tuffs, tuffs). Three deep potential gold targets were identified, highlighting the deep western edge of the F1 fault and the deep southeast-trending lower plate as prospective areas for future exploration. This study underscores the effectiveness of 3D prospective modeling as an indispensable tool for elucidating the spatial distribution of fault-controlled Carlin-type gold deposits and their tectonic determinants.

Aristotle vs. Ringelmann was a discussion between two distinct research teams from the ETH Zürich who argued whether the productivity of Open Source software projects scales sublinear or superlinear with regard to its team size. This discussion evolved around two publications, which apparently used similar techniques by sampling projects on GitHub and running regression analyses to answer the question about superlinearity. Despite the similarity in their research methods, one team around Ingo Scholtes reached the conclusion that projects scale sublinear, while the other team around Didier Sornette ascertained a superlinear relationship between team size and productivity. In subsequent publications, the two authors argue that the opposite conclusions may be attributed to differences in project populations, since 81.7% of Sornette’s projects have less than 50 contributors. Scholtes, on the other hand, sampled specifically projects with more than 50 contributors. This publication compares the research from both authors by replicating their findings, thus allowing for an evaluation of how much project sampling actually accounted for the differences between Scholtes’ and Sornette’s results. Thereby, the discovery was made that sampling bias only partially explains the discrepancies between the two authors. Further analysis led to the detection of instrumentation biases that drove the regression coefficients in opposite directions. These findings were then consolidated into a quantitative analysis, indicating that instrumentation biases contributed more to the differences between Scholtes’ and Sornette’s work than the selection bias suggested by both authors.

Attention to the work-related musculoskeletal disorders (WMSDs) involve also statistical surveys showing an increasing trend in the incidence of WMSDs. Technological development retrieves new tools and methods for the assessment of physical load at work. In addition to the conventional questionnaires and scaling assessment systems, these methods are mostly based on the direct sensing of appropriate parameters, which allows more precise quantification. The aim of this paper is to compare the assessment of ergonomic risk through current legislative regulations. A Captiv wireless sensor system was used at a car headlight quality control assembly workplace for sensing, data acquisition and data processing. During the evaluation of the postures and movements at work, we discovered differences in the applicable standards: Decree 542/2007 Coll. (Slovak legislation), STN EN 1005-4+A1, French standards default in the Captiv system. Standards define the thresholds for hazardous postures with significant differences in several evaluated body segments, which also affects the final evaluation of the measurements. Based on the results of our research, we found that respondents were in an acceptable position for approximately 63% of the total duration of the work activity in terms of the Legislative method, 44% with Captiv and 27% with Standards method.

This research investigates the lane width standards and guidelines implemented by various State Departments of Transportation (DOTs) to reduce vehicle speeds and enhance road safety. Lane width reduction is often perceived as a strategy to mitigate speed and improve safety. Still, its effectiveness and implications vary across different contexts, including regions, urban/rural settings, or other geometric design features. Drawing from interviews with five State DOTs and a review of their road design manuals, this study aims to identify suggested lane widths depending on the contexts, design exception process when narrowing or widening lane widths, and introduce representative before/after studies. The findings indicate that State DOTs tend to have lower recommended lane widths in urban areas than in rural areas. Moreover, lane width standards among these states vary due to several factors, including the geographical location of roadways (urban or rural areas), design or posted speeds, traffic volume, road classification, and geometric road design features. Design exceptions are required if the existing or proposed design element is incompatible with both AASHTO and department governing criteria. In conclusion, the findings will provide valuable insights and recommendations for policymakers, transportation planners, and road engineers to inform optimal lane width and decision-making processes.

This study investigates the evolving corporate governance mechanisms within the context of an emerging economy. Addressing a literature gap, we analyse the influence of corporate governance and earnings quality on idiosyncratic risk in an emerging economy. In particular, this research explores the impact of corporate governance practices and earnings quality on idiosyncratic risk. For this purpose, we utilise a sample of 75 non-financial firms listed on the Pakistani equity market over nine years from 2010 to 2018. Employing the generalised method of moments, the findings of our empirical analysis reveal that firms with robust governance mechanisms and higher earnings quality experience minimal idiosyncratic risk. These outcomes provide valuable insights for standard setters, regulatory authorities, policymakers, and other stakeholders, emphasising the importance of governance mechanisms and earnings management in mitigating idiosyncratic return volatility.

Plastic contamination of small dimensions (

Agroforestry is increasingly being recognized as a holistic food production system that can have numerous significant environmental, economic, and social benefits. This growing recognition is paralleled in the U.S. by the budding interest in regenerative agriculture and motivation to certify regenerative practices. Current efforts to develop a regenerative agriculture certification offer an opportunity to consider agroforestry’s role in furthering regenerative goals. To understand this opportunity, we first examine how agroforestry practices can advance regenerative agriculture’s five core environmental concerns: soil fertility and health, water quality, biodiversity, ecosystem health, and carbon sequestration. Next, we review a subset of certification programs, standards, guidelines, and associated scientific literature to understand existing efforts to standardize agroforestry. We determine that development of an agroforestry standard alongside current efforts to certify regenerative agriculture offers an opportunity to leverage common goals and strengths of each. Additionally, we determine that there is a lack of standards with measurable criteria available for agroforestry, particularly in temperate locations. Lastly, we propose a framework and general, measurable criteria for an agroforestry standard that could potentially be implemented as a standalone standard or built into existing agriculture, forestry, or resource conservation certification programs.

The sleeping and grazing behaviors of horses play a crucial role in their health and welfare. In the horse industry, with the prevalent trend of individual single-stall farming in stable, accurately identifying various behaviors of horses within stables is imperative. This study has established a spatio-temporal dataset for horse postures and behaviors, proposed an algorithm utilizing a SE-SlowFast network with an enhanced loss function. This algorithm achieves automatic recognition of multiple postures and behaviors of horse simultaneously. The model developed in this study demonstrates high accuracy in identifying three postures within the stable: Standing, Crouching, and Lying, achieving respective accuracies of 92.73%, 91.87%, and 92.58%. Additionally, it accurately recognizes two behaviors: Sleeping and Grazing, achieving best accuracies of 93.56% and 98.77%. The overall best accuracy of the model is 93.9%. Experiments on video recognition confirm that the suggested model recognizes horse video data accurately. This study marks the first time computer vision technology has been used in the horse farming industry, achieving non-intrusive recognition of multiple horse postures and behaviors. This study provides valuable data support for livestock managers to evaluate the health conditions of horses, enhances the welfare of horses in stables, and contributes to the advancement of modern horse husbandry practices.

The transportation sector significantly contributes to greenhouse gas emissions, thus imposing sig-nificant environmental hazards. In response, many nations have begun promoting Electric Vehicles (EVs) as an ecologically sustainable substitute for traditional combustion vehicles. Lithium-Ion Batteries (LIBs), characterized by their high energy density, extended lifespan, and relatively low self-discharge rate, have become the suitable energy storage system for EVs, advancing the field of sustainable transportation. The decreasing cost of LIB production has primarily driven this progression, realized through a combination of economies of scale, advancements in electrode materials and cell design, and re-finements in manufacturing processes. All these elements collectively contribute to the cost reduc-tion of LIBs. A foreseeable implication of this trend is an expected surge in LIBs that will exhaust their operational lifespan and, consequently, be cast away into the environment. One mitigating strategy for this impending environmental issue involves collecting these spent EV batteries, re-configuring them, and repurposing them for applications with less rigorous weight, performance, and size prerequisites. This approach would not only prolong the utility life of the batteries but also ameliorate their environmental impacts. Nevertheless, second-life batteries are anticipated to exhibit a higher rate of gas evolution, necessitating comprehensive testing and readjustments to ensure safe operation in secondary ap-plications. The regulatory framework encompassing the second-life battery sector still needs to be defined regarding norms, technical standards, and legislation. This paper aims to elucidate the primary regulations and technical standards proposed thus far in the second-life battery marketplace. The results underscore the exigency for neutral evaluative entities, such as universities, research centers, and governmental institutions, to perform an unbi-ased assessment of the second-life battery market. This would pave the way for novel technical standards and legislative measures specifically tailored to this emerging sector.

Rett syndrome (RTT) is a rare disease and one of the most abundant causes for intellectual disa-bilities in females. Single mutations in the gene coding for methyl-CpG-binding protein 2 (MECP2), are responsible for the disease. MeCP2 regulates gene expression as a transcriptional regulator as well as through epigenetic imprinting and chromatin condensation. Consequently, numerous biological pathways on multiple levels are influenced however, the exact molecular pathways from genotype to phenotype are currently not fully elucidated. Treatment of RTT is purely symptomatic where no curative options for RTT have yet to reach the clinic. The paucity of this is mainly due to an incomplete understanding of the underlying pathophysiology of the dis-order with no clinically useful common disease drivers, biomarkers or therapeutic targets being identified. With the premise of identifying universal and robust disease drivers and therapeutic targets, here we interrogated a range of RTT transcriptomic studies spanning different species, models and MECP2 mutations. A meta-analysis using RNA sequencing data from brains of RTT mouse models human post-mortem brain tissue and patient-derived induced pluripotent stem cells (iPSC) neurons was performed using Weighted Gene Correlation Network Analysis (WGC-NA). This study identified a module of genes common to all datasets with the following ten hub genes driving the expression ATRX, ADCY7, ADCY9, SOD1, CACNA1A, PLCG1, CCT5, RPS9, BDNF and MECP2. Here we discuss the potential benefits of these genes as therapeutic targets.

Data spaces are a relatively recent concept for a trusted and secure distributed data ecosystem through which to exchange resources in the Web. Several different efforts are currently being made to define guidance toward data space implementation, with some initiatives and organizations providing solutions and standards that address interoperability and good data exchange practices, especially in the domain of geospatial information. Geospatial Use Cases often require effective and high-quality data sharing between systems dealing with different aspects of real-world objects. However, the different solutions proposed do not yet provide a common interoperability framework with mature implementation options. This gap between concept and implementation risks confusing users and developers, instead of reciprocally strengthening the respective data spaces' infrastructures and capabilities. This paper reviews and compares some of the proposed solutions, providing mapping and integration of these blueprints to available interoperability standards. This concrete mapping is designed to support effective practical implementation of data spaces, and to guide future solutions developments.

The work addresses the problem of Power Quality (PQ) metrics (or indexes) suitable for DC grids, encompassing Low and Medium Voltage applications, including electric transports, all-electric ships and aircrafts, electric vehicles, distributed generation and microgrids, modern data centers, etc. The two main pillars on which such PQ indexes are discussed and built are: i) the physical justification, so the electric phenomena affecting DC grids and components (PV panels, fuel cells, capacitors, batteries, etc.), causing e.g. stress of materials, ageing, distortion, grid instability; ii) the existing standardization framework, pointing out desirable coverage and extension, similarity with AC grids standards, but also inconsistencies. The first point is made more clear and usable by a graphical overview of the discussed phenomena. On this basis PQ is interpreted beyond the usual low-frequency range, including thus supraharmonics and common-mode disturbance, and filling the gap with the Electromagnetic Compatibility domain. However, phenomena typical of EMC and electrical safety (such as various types of overvoltages and fast transients) are excluded. Suitable PQ indexes are then reviewed, suggesting integrations and modifications, to cover the relevant phenomena and technological progress, and to better follow the normative exigencies.

The rapid evolution of drug resistance is one of the greatest health issues of the 21st century. There is an alarming situation to find new therapeutic strategies or candidate drugs to tackle ongoing multi-drug resistance development. The marine environment is one of the prime natural ecosystems on Earth, the majority of which is still unexplored, especially when it comes to the microbes. A wide variety of bioactive compounds have been obtained from a varied range of marine organisms, however, marine bacteria-produced bacteriocins are still undermined. Owing to the distinct environmental stresses that marine bacterial communities encounter, their bioactive compounds frequently undergo distinct adaptations that confer on them a variety of shapes and functions, setting them apart from their terrestrial counterparts. The ribosomally-synthesized and posttranslationally modified peptides (RiPPs), bacteriocins are of special interest because of their variety in structure and diverse potential biological activities. Additionally, the gut microbiome of marine creatures are largely unexplored source of new bacteriocins with promising activities. There is a huge possibility of novel bacteriocins from marine bacterial communities that might come out as efficient candidates to fight against antibiotic resistance, especially in light of the growing pressure from antibiotic-resistant diseases and industrial desire for innovative treatments. The present review summarizes known bacteriocins from marine bacteria, evolutionary aspects, challenges, and huge possibilities of unexplored bacteriocins from marine bacterial communities.

Cannabis use disorder (CUD) is a growing public health concern, with rising prevalence and significant impact on individuals across age groups. This systematic review examined pharmacological and psychosocial interventions for CUD among adolescents, young adults, transitioning adults, and older adults. Database searches were conducted for randomized controlled trials of CUD interventions reporting outcomes such as cannabis use, abstinence, withdrawal symptoms, and treatment retention. In total, 53 studies were included. Pharmacological treatments such as cannabinoid agonists, gabapentin, and N-acetylcysteine demonstrated modest benefits predominantly in alleviating withdrawal and craving. Psychosocial approaches including motivational interviewing, cognitive behavioral therapy, and contingency management conferred greater abstinence and retention, either alone or combined with pharmacotherapy. However, age-specific efficacy remains unclear. Technology-based interventions represent promising alternatives to expand access and improve cost-effectiveness. In conclusion, cannabis disorders require expanded, affordable treatment tailored to individuals’ developmental stage. Further research should clarify the utility of harm reduction outcomes and establish age-specific best practices.

The upgrade of energy infrastructure to those of smart grids, necessarily goes through the provision of integrated technological solutions that ensure the interoperability of their business capabilities and reduce the risk of devaluation of the systems used. The heterogeneity of the infrastructures and the dynamics of their operating environment, requires the continuous reduction of the complexity, the faster execution of the processes and the easy addition of innovative counterparts. Also, the integrated management of the overall ecosystem demands the provision of end-to-end interconnection, quality assurance, the definition of strict security policies, collaborative integration and correlation of events. In this respect, every design detail can be critical to the success or failure of a costly and ambitious project, such as that of smart energy networks. This work presents communication operating standards specific to the smart electricity networks applications, which should be taken into account in the process of planning and implementation of new infrastructures.

Implementing ethical procurement standards is increasingly recognized as pivotal for organizations aiming to align their practices with principles of social responsibility and sustainability. This qualitative research explores the experiences, challenges, strategies, and impacts associated with ethical procurement across diverse sectors. Motivations for adopting ethical procurement include enhancing corporate reputation, meeting stakeholder expectations, and complying with regulatory frameworks. However, organizations face significant challenges such as balancing ethical considerations with cost-efficiency pressures, navigating complex regulatory landscapes, and ensuring transparency across global supply chains. Strategies for overcoming these challenges emphasize effective supplier relationship management, leveraging technological innovations for transparency, and investing in supplier capacity-building. The study reveals that ethical procurement practices contribute to organizational resilience by improving risk management, enhancing stakeholder engagement, and fostering innovation in procurement processes. Moreover, ethical procurement supports sustainable development goals by promoting environmental sustainability, supporting social equity through fair labor practices, and contributing to economic development. Future research directions include exploring the impact of emerging technologies on ethical procurement, promoting global collaboration for unified standards, and evaluating the long-term sustainability of ethical procurement initiatives.

In the last decade, a higher level of reliability became a compulsory demand when it comes to modern DC-DC converters. This work addresses the main reliability metrics: the failure rate λλ and MTBF of an output capacitor bank used within a high current low voltage buck converter due to many studies have shown that the output capacitor bank was demonstrated being the most critical component within the converter. Many authors treated this issue, usually by doing reliability predictions. The majority of the papers use only one specific Standard Prediction to solve the problem. Herein calculation was done using both the older standard MIL-HDBK-217 and the latest one Telcordia SR-332, providing a benchmark comparison between the two which is a helpful tool for the output capacitor selection in the early stage design. Military standard was well accepted for decades in order to reliability prediction even on industrial electronics and is still used today under a critical manner because no more update after the latest version MIL-HDBK-217F - Notice 2 released in 1995. Since then, newer prediction standards had appeared in the electronics reliability market. Over time, this standard was mostly used but it does not accurately model the reliability because lack of taking account of mission profile. The above-mentioned newer standard – i.e., Telcordia SR-332 is trying to compensate also the lack of the newest component technology in the older standard (which is the first standard released on the market) supplying useful design data for design engineers who use the so-called “design with the reliability in mind” concept. Within the paper were established the environmental condition for the passive components by means of a PoL (Point of load) buck converter that is used for both calculation methods. The influence of temperature and several specific concepts like reference conditions, operating conditions, ripple, and internal self-heating were taking account in order to display the results. The temperature for the capacitor’s capsule needed in π_T stress factor calculation was derived by PSPICE simulation. High fidelity and dedicated SPICE models provided by the manufacturer were used for MOSFETs, polymer electrolytic, and MLCC capacitors that compose the converter.

This study explores the synthesis and application of BODIPY-functionalized gold nanoparticles (AuNPs) for the sensitive detection of biothiols via an indicator displacement assay coupled with Surface-Enhanced Raman Scattering (SERS) techniques, alongside their efficacy for in vitro cancer cell imaging. Moreover, the assay allowed a visible colorimetric detection of biothiols under normal and ultraviolet light conditions. The BODIPY (boron-dipyrromethene) fluorophores were strategically conjugated to the surface of gold nanoparticles, forming a robust nanohybrid that leverages the plasmonic properties of AuNPs for enhanced spectroscopic sensitivity. The detection mechanism exploits the displacement of the BODIPY indicator upon interaction with biothiols, triggering a measurable change in fluorescence and SERS signals. This dual-mode sensing approach provides high selectivity and sensitivity for biothiol detection, with detection limits reaching nanomolar concentrations using fluorescence and femtomolar concentration for cysteine using SERS. Furthermore, the BODIPY-AuNP complexes demonstrated excellent biocompatibility and photostability, facilitating their use in fluorescence imaging of biothiol distribution within cellular environments and highlighting their potential for diagnostic and therapeutic applications in biomedical research.

The article presents the results of cyanide leaching of gold-containing concentrate using the trichlorocyanuric acid (TCCA) oxidizer. Gold-containing concentrate obtained from a gold tailings sample from a gold recovery factory (GRF) in one of the deposits of Kazakhstan that was not previously studied for concentrability. According to X-ray phase analysis and energy dispersive spectrometry (DSM) data, the main compounds in the tailings sample under study are: pyrite FeS2, quartz SiO2, calcite CaCO3, albite NaAlSi3O8, muscovite KAl2Si3AlO10(OH)8, dolomite CaMg(CO3)2, and oxidized iron compounds. Microscopic studies have established the presence of gold grains in free form, ranging in size from 0.9-10.2 mkm Au-ultrafine and fine gold. Obtaining a gold-containg concentrate with a gold content of 15.95 g / t is possible according to the enrichment scheme, which includes centrifugal separation, classification according to the fineness class -0.05 mm, additional grinding of hydrocyclone sands to a fineness of 90.0-95.0% of the class finer than 0.050 mm, and control centrifugal separation. Since pyrite in technogenic raw materials is the main gold-containing mineral, this paper presents studies on the oxidizability of pyrite with the TCCA oxidizer. The results of studies on the oxidation of pyrite using the TCCA oxidizer show that the products of its hydrolysis oxidize pyrite with the formation of various iron compounds on its surface. Pretreatment of gold-containing concentrate with oxidizer TCCA for 3 hours before the cyanidation process (20 hours) allows to increase the recovery of gold in the solution by 5.8 %.

The study of localized surface plasmons (LSPs) in nanoscale structures is an essential step towards identifying optimal plasmonic modes that can facilitate robust optomechanical coupling and deepen our understanding of light-matter interactions at the nanoscale. This paper investigates numerically, using the finite element method, LSPs modes in a design comprising two coupled nano-ridges deposited on a gold layer, with an interposing polymer spacer layer. Such a structure, usually referred to as particles-on-mirror, shows exquisite optical properties at the nanoscale. We first examine the LSPs modes of a single nano-ridge through the analysis of its scattering cross-section in the visible and infrared range. To enhance the plasmonic response, a thin polymer layer is placed at the middle of the ridge, which introduces additional LSPs modes confined within the former. Then, we extend the analysis to the dimer configuration, which exhibits more complex and enhanced plasmonic behavior compared to a single nano-ridge. In particular, the dimer configuration yields LSPs resonances with a quality factor enhancement of approximately threefold relative to single nano-ridge. Furthermore, the presence of the polymer layer within the ridges significantly improves plasmon field localization and quality factor. These findings underscore the potential of nano-ridge-based structures in advancing optomechanical coupling and plasmon-phonon interaction studies, offering valuable insights for the development of high-performance acousto-plasmonic devices. In particular, the proposed device could help significantly improve the design of nano-acousto-optic modulators operating in the visible or in the near infrared, that require enhanced light-photon coupling rate.

The paper concerns with the identification of current communication technologies and software functionalities from the field of digitalization and Industry 4.0, from the point of view of benefits and applicability for the machine manufacturer. In order to identify the relevant technologies and functionalities, both a descriptive and statistical literature research was carried out. As a result, both the currently most widespread technologies and eleven IT functionalities relevant to mechanical engineers were identified and described in terms of their application and implementation. In addition, a knowledge gap in the area of industry transfer in the field of Industry 4.0 / Digitalization was identified

Minimum housing standards aim to safeguard housing rights and enhance residential conditions. Governments develop housing policies, including provision, preservation, and support for welfare programs, guided by the status of households below these standards. Growing nations commonly utilize this approach to decrease the proportion of households not meeting these criteria. In South Korea, the ratio of households below these standards was 4.5% in 2021, down from 16.6% in 2006, as indicated by the initial Korea Housing Survey. However, this downward trend has stalled over the past decade. With the 2004 and 2011 revisions, the standards have been effective for 12 years, yet no longer mirror current housing realities due to ongoing improvements. This study aimed to propose enhancements to Korea’s minimum housing standards. Through analyzing laws, prior research, present household statuses, international cases, and expert insights, recommendations emerged. Categorizing households by size, we developed precise standards covering area, facility, and location aspects. These new standards led to an 8.4% non-compliance rate in 2021. This research’s findings anticipate aiding the revision of minimum housing standards, formulating pragmatic policies for enhancing residential conditions in line with present situations.

Imagination is more important than knowledge, but if intellect does not provide the needed logical structures, capacities for envisioning new possibilities are overly constrained. The sustainability problems we face today cannot be solved with the same kind of thinking that created them, but clarity on what counts as a new kind of thinking is sorely lacking. This article proposes methodical, model-based ways of heeding Bateson's warning about the negative consequences for the ecology of mind that follow from ignoring the contexts of relationships. Informed by S. L. Star's sense of boundary objects, a sequence of increasingly complex logical types distinguishes and interconnects qualitatively different kinds of thinking in ways that liberate imaginative new possibilities for life. The economy of thought instantiated at each level of complexity is only as meaningful, useful, beautiful, ethical, and efficient as the standards informing local adaptive improvisations. Standards mediating the general and specific, global and local, universally transcendent and embodied particulars enable meaningful negotiations, agreements, and communications. Attending to the differences between levels of discourse sets up new possibilities for creative and imaginative entrepreneurial approaches to viable, feasible, and desirable goals for measuring and managing sustainable development.

This review stresses the need for geoscience and mining engineering students to be educated during their undergraduate studies in social and sustainability issues so they would have the skills and knowledge in their work after graduation, as professionals, to engage Indigenous People for mutual benefit. Large - scale mining development often takes place on Indigenous land and these educated mining professionals in their contact with these vulnerable communities must act in a responsible way. This includes the important mining policy issues and standards of corporate social responsibility (CSR), social license to operate and free, prior and informed consent from the Indigenous People before mining. For example, these policy standards issues would have been important to consider in Indonesia where the Indigenous Muluy Dayak community in East Kalimantan tried to resist large-scale mining operations by depicting their small-scale mining as part of their Indigenous customs and identity and in Australia where there was the recent destruction of an Aboriginal sacred site during large scale mining operations.

Reinforced concrete (RC) columns are often placed under confinement to increase their strength and ductility. Carbon fiber reinforced polymer (CFRP) materials have recently been recognized as favorable confinement systems. At present, a number of national standards and codes dedicated to the design of concrete components strengthened with CFRP in general and CFRP confinement in particular are available. These sets of rules provide design equations for confined reinforced concrete columns with circular and rectangular cross sections. Most of the standards and codes exhibit significant differences, including the used predictive models limitations, observed effects, and covered loading conditions. In this paper, five international standards and design guidelines are introduced and discussed. The purpose is to present a constructive and critical assessment of the state-of-the-art design methodologies available for CFRP confined RC columns and to discuss effects not previously considered properly. Therefore, some recent research efforts and findings from the Leipzig University of Applied Sciences are also introduced. The obtained data is used for a comparative study of the guideline predictive equations. Furthermore, it is shown that some new findings concerning the rupture strength and the maximum strength plus accompanying axial strain of a CFRP confined column are suitable to improve the current guidelines.

One of the most important defining characteristics of groundwater quality is pH as it fundamentally controls the amount and chemical form of many organic and inorganic solutes in groundwater. Groundwater data are frequently characterized by a wide degree of variability of the factors which possibly influence pH distribution. For this reason, it is challenging to link the spatio-temporal dynamics of pH to a single environmental factor by the ordinary least squares regression technique of the conditional mean. In this study, quantile regression was used to estimate the response of pH to nine environmental factors (As, Cd, Fe, Mn, Pb, turbidity, electrical conductivity, total dissolved solids and nitrates). Results of 25%, 50%, 75% quantile regression and ordinary least squares (OLS) regression were compared. The standard regression of the conditional means (OLS) underestimated the rates of change of pH due to the selected factors in comparison with the regression quantiles. The effect of arsenic increased for sampling locations with higher pH values (higher quantiles) likewise the influence of Pb and Mn. However, the effects of Cd and Fe decreased for sampling locations in higher quantiles. It can be concluded that these detected heterogeneities would be missed if this study had focused exclusively on the conditional means of the pH values. Consequently, quantile regression provides a more comprehensive account of possible spatio-temporal relationships between environmental covariates in groundwater. This study is one of the first to apply this technique on groundwater systems in sub-Saharan Africa. The approach is useful and interesting and has broad application for other mining environments especially tropical low-income countries where climatic conditions can drive rapid cycling or transformations of pollutants. It is also pertinent to geopolitical contexts where regulatory; monitoring and management capacities are weak and where mining pollution of groundwater largely occur.

Abstract Introduction: The mHealth active participant centred (MAPC) adverse events following immunisation (AEFI) surveillance is a promising area for early AEFI detection resulting in risk minimisation. Passive (spontaneous) AEFI surveillance is the backbone for vaccine pharmacovigilance, but has inherent drawbacks of under reporting, and requires strengthening with active surveillance methods. The Zimbabwe stimulated telephone assisted rapid safety surveillance (Zm-STARSS) randomized controlled trial (RCT) sought to evaluate the efficacy and feasibility of AEFI detection using a short message service (SMS) and computer assisted telephone interview (CATI) approach. Method: A multicentre Zm-STARSS RCT enrolled consented adult vaccinees or parents or guardians of children receiving vaccines, including COVID-19 vaccines, at study vaccination clinics. At enrolment study participants were randomised to either SMS-CATI group or control group. SMS prompts were sent on days 0-2 and 14 post-vaccination to SMS-CATI group to ascertain if a medical event following immunisation (MEFI) had occurred. However, no SMSs were sent to the control group. SMS-CATI group who responded “Yes” to SMS prompts were interviewed by research healthcare workers (RHCWs) who completed a CATI to determine if an MEFI/AEFI had occurred whilst an AEFI in control group was determined from passive AEFI reporting channels. The primary study outcome was the AEFI detection rate in the SMS-CATI group compared to the control group. Results: A total of 704 (31%) participants responded to the SMS prompts, with 75% (528/704) indicating “No” and 25% (176/704) "Yes” to experiencing a MEFI. However, 31% (55/176) who responded “Yes” did not complete a CATI survey, but 69% (121/176) did; and 64% (77/121) of these indicated negative to AEFI experience whilst 36% (44/121) were affirmative. There were no AEFI reported in control group participants. Zm-STARSS showed promising results in that the AEFI detection rate using SMS-CATI was 2% (44/2280) on an intention to treat cohort. Conclusion: Despite the low SMS response and CATI completion rate, we demonstrated that Zm-STARSS SMS system improves AEFI detection compared to passive AEFI surveillance. We recommend cost-effective multi-channel digital approaches for holistic pharmacovigilance to improve AEFI detection in LMICs for all vaccines.

We have investigated the influence of the relative proportions of glass formers in a series of lithium alumino-borosilicate glasses with respect to electrical conductivity () and glass transition temperature (Tg) as functions of glass structure, as determined by Raman spectroscopy. The ternary lithium alumino-borate glass exhibits the highest  and lowest Tg among all the compositions of the glass series, 30Li2O•3Al2O3• (67-x) B2O3•xSiO2. However, as B2O3 is replaced by SiO2, a shallow minimum in  as well as a shallow maximum in Tg are observed near x = 27, where the Raman spectra indicate isolated diborate/tetraborate/orthoborate groups are being progressively replaced by danburite/reedmergnerite-like borosilicate network units. Overall, as the glasses become silica-rich,  is minimized, while Tg is maximized. In general, these findings show correlations among Tg, (sensitive to network polymerization),  (proportional to ionic mobility), and the different borate and silicate glass structural units as determined by Raman spectroscopy. X-ray diffraction analyses demonstrate the absence of appreciable crystallinity in the glasses investigated. However, scanning electron microscopy (SEM) images of HF-etched samples showed that glasses, and especially the borate-rich compositions comprise two distinct glassy phases. The isolated phase is 25-100 nm in diameter, dispersed evenly in a glassy matrix.

This study assesses the alignment of Singaporean companies’ sustainability reporting with the newly introduced International Financial Reporting Standard S1, a global framework for sustainability-related financial disclosures. Given Singapore’s role as a major financial hub, understanding the extent to which local companies comply with this standard is critical to promoting transparency and accountability in sustainability practices. The study was conducted in two phases: the first phase was to summarize the timing of different countries’ preparations for the implementation of the IFRS S1 standard, as well as their attitudes. The second phase was a content analysis of the sustainability reports of 70 listed companies. The findings show that while companies are generally proactive in reporting governance, strategy, and metrics, they fall short in risk management disclosure, which is an important requirement of IFRS S1. This gap highlights the challenges companies face in incorporating comprehensive risk management practices into sustainability reporting. This study provides a reference for improving future sustainability reporting and encourages companies to align more closely with IFRS S1 to meet investors’ growing demand for transparent and standardized sustainability disclosures.

This study aims to examine the cytotoxicity mechanisms of synthetic cathinone (bath salts) on rat primary cultured neurons and primary astroglial cells, and to assess their neurobehavioral effects on mice. We administered methylenedioxypyrovalerone (MDPV) to both rat primary cultured neurons and primary astroglial cells to assess cell injury. We also analyzed the effects of MDPV on these cell cultures using immunocytochemistry. We utilized western blotting to assess the breakdown of αII-spectrin and glial fibrillary acidic protein (GFAP) induced by MDPV. The western blotting experiment also included calpain and caspase inhibitors (SNJ1945 and Z-D-DCB, respectively) and pro-apoptotic and pro-necrotic agents (Staurosporine and calcium ionophore A23187, respectively). Lastly, we assessed MDPV’s effects on behavioral effects using rotarod, locomotor activity, elevated plus maze, Morris water maze, forced swimming, and open field tests. MDPV caused a dose-dependent release of LDH in both cerebrocortical neuron-astroglia mixed cultures and primary astroglial cultures. MDPV also caused neurite breakages and astroglial process retraction on immunocytochemistry. Lastly, MDPV induced αII-spectrin breakdown in western blotting experiments. Co-administration of calpain and caspase inhibitors reduced the degradation of αII-spectrin and GFAP. MDPV administration also increased anxiety-like behavior and locomotor activity in the mice. Synthetic cathinones, which share structural similarities with methamphetamine, also induce significant neurotoxic effects and neurobehavioral effects on rodent models. These neurotoxic effects are likely mediated by calpain and caspase-induced apoptosis and necrosis, while astroglial death is likely only due to calpain activation. Therefore, further research may focus on pharmacological interventions targeting these pathways to mitigate the cytotoxic impact of cathinones in humans.

Syanyonja village in the gold district of Busia, South East of the Republic of Uganda contain geologically epigenetic gold quartz vein deposits in carbonate-altered mafic metavolcanic rocks, deposited as quartz reefs in mineralized shear zones. In supracrustal rocks, alluvial gold is obtained from weathered auriferous quartz veins, which are of late orogenic granitic activity. The Syanyonja gold deposits have long been subjected to artisanal and small-scale gold mining (ASGM) by the locals for livelihood. This study determined the amount of mercury discharged with tailings into Namukombe stream, a major water body in Syanyonja village and investigated the impacts of ASGM on the mining population and the environment. Quantitation of mercury discharged with tailings was done by mass balance method. Field survey at the mining sites was done followed by administration of questionnaires to 50 stampeders in the village. The study indicates that about 8% of mercury mixed with auriferous materials are lost in tailings, accounting for an annual mercury release of about 1.757 kg into the environment. Socio-demographic results indicate that the majority of the mining population (64%) are male and ASGM have left health and environmental footprints, which directly or indirectly affects the population. The most common health problems among miners are malaria (36%) and abdominal pain (20%). The standard of living of the miners are evidently low, and most mines are characterized by school dropouts, prostitutes and thieves. Mining sites have deplorably poor hygiene, with evident burning of amalgams to recover gold. ASGM have been accompanied by wanton mowing down of vegetation, land degradation as well as mercuric pollution of water, air, land and aquatic ecosystems. It is suggested that the Ugandan government should re-enforce committees to follow up on ASGM activities, train artisans on sustainable gold mining using borax, magnets, sluice boxes as well as take up farming actively as an alternative.

Bamboo is the building material of the past and future. It offers numerous properties that make it versatile for various applications, including construction. Its impressive strength-to-weight ratio enables it to bear substantial loads and stresses, while its good elasticity allows efficient energy absorption. However, its mechanical properties can vary based on factors such as species, age, locations, methods, and treatment. Treating bamboo is essential to enhance its properties and durability. The literature provides various natural and chemical treatments which enhanced some of the properties but also reported a drawbacks on higher temperature, content and duration. This paper reviewed 57 articles from Scopus database, specifically focusing on article-document type publications from the years 2003 to 2023. Additional references were also incorporated to address concerns in properties, treatment and standards to provide systematic understanding. MATLAB was utilized for data text analytics. With extensive assessment on the articles, the following gaps and concerns were observed and recommends for further study and assessment such as for bamboo properties, the development of centralized guidelines and procedures for the preparation and processing; exploration of alternative materials to reinforce bamboo without compromising its ductility; development of joint connections, and testing of mechanical properties considering seismic, wind and vibration. For treatment methods, the standardization of procedures using natural, chemical or combination. Lastly, for bamboo codes and standards, assessment of existing codes and standards for testing the mechanical properties of bamboo highlighting the potential limitations and areas, uniformity, differences with all existing similar standards. By filling these gaps, it can support the reliability and robustness of bamboo as a sustainable material, fostering its promotion and adoption in construction industry.

The COVID-19 pandemic over the past years has shown a great need for rapid, low-cost and on-site detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). In this paper, an aptamer-based colloidal gold nanoparticle lateral flow test strip was well developed to realize the visual detection of wild type SARS-CoV-2 spike protein (SP) and multiple variants. Under the optimal reaction conditions, a low detection limit of SARS-CoV-2 S protein of 0.68 nM was acquired, and the actual detection recovery was 83.3% to 108.8% for real world samples. This suggests a potential tool for the prompt detection of SARS-CoV-2 with good sensitivity and accuracy, and a new method for the development of alternative antibody test strips for the detection of other viral targets.

In this paper, the far field and near field optical responses of a gold nanoparticle are studied and simulated numerically. The electromagnetic field was excited by an electric dipole located near one end of the nanorod, which is used to model the emission of a quantum dot. Another excitation method was also simulated in which an incident plane wave is used. The excitation of dark plasmon modes of the gold nanorod is presented. The Poynting equation was solved numerically to study the influence of the gold nanorod on the dipole radiative power. In addition, the extinction cross section of the gold nanoparticle illuminated by the incident plane wave was calculated to estimate the amount of the scattered and absorbed light.

In this work, studies were carried out on the extraction of silver and gold from cakes of pressure oxidation leaching of sulfide concentrate containing pyrite and arsenopyrite. The addition of gypsum at a consumption of 0.1 g/g of concentrate helps to increase silver extraction from 13.4 to 95–98% at the cyanidation stage, with no conditioning operation. Gold recovery was 99%. An increase in gypsum consumption contributes to the formation of BFAS with an increased content of sulfate sulfur, and a decrease in the As/S(sulfate) molar ratio in the cake from 3.7 down to 0.88 contributes to an increase in silver extraction at the cyanidation stage up to 98%, and its further decrease from 0.88 down to 0.58 leads to a gradual reducing silver transfer into solution from 98 down to 75.1% at the cyanidation stage. Basic ferric sulfate (BFS) is not formed in this case, since according to EDS mapping the distribution of arsenic and sulfur over iron-containing particles is uniform. According to TCLP analysis, the cake obtained after pressure oxidation leaching with the addition of gypsum and cyanidation is stable and suitable for disposal, since the final concentration of arsenic in the solution was 0.45 mg/dm3.

(1) Background: Double-strand breaks (DSBs) in a single nucleus are usually measured using the sperm chromatin structure assay (SCSA), sperm chromatin dispersion (SCD) test, and comet assay (CA). We developed mono-dimensional single-cell pulsed-field gel electrophoresis (1D-SCPFGE) and angle-modulated two-dimensional single-cell pulsed-field gel electrophoresis (2D-SCPFGE) to observe DNA fragmentation in separated motile sperm. (2) Methods: We set up comparative standards, calibration curves, the required sensitivity, and eligibility criteria for test sperm to validate their measurement principles. (3) Results: We revealed that the conventional methods overlooked the interference of nucleoproteins in their measurements. In-gel proteolysis improves the measurement accuracies of 1D- and 2D-SCPFGE. We recommend using naked DNA for comparative standards and test specimens. Moreover, we have observed several dysfunctions that may induce DNA damage in the separated motile sperm. Overall, our discussion highlights the need to revisit the conventional univariable analyses based on the SCSA, SCD test, and CA. (4) Conclusions: Human infertility is a complex syndrome, and the aim of quality control in intracytoplasmic sperm injection is to identify the underlying dysfunctions remaining in the separated motile sperm that render them ineligible for injection. Well-designed, multivariable analyses with special consideration to confounding factors are necessary in future cohort studies.

During the past few decades, hybrid nanoparticles (HNPs) based on a magnetic material and gold have attracted interest for applications in catalysis, diagnostics and nanomedicine. In this paper, magnetic CoFe2O4/Au HNPs with an average particle size of 10–20 nm decorated with 2-nm gold clusters were prepared using methionine as a reducer and an anchor between CoFe2O4 and gold. The obtained nanoparticles were studied by X-Ray diffraction (XRD), transmission electron microscopy (TEM), Fourier-transform infrared (FT-IR) spectroscopy and X-Ray photoelectron spectroscopy (XPS) and UV-Vis spectroscopy techniques. The TEM images of the HNPs obtained after one, six and ten gold deposition cycles showed that the surface of cobalt ferrite was covered with gold nanoclusters, which slightly increased with an increase in the number of gold deposition cycles (from 2.12 ± 0.15 nm after one cycle to 2.46 ± 0.13 nm after ten cycles) without any change in surface density. The magnetic measurements showed that the obtained HNPs possessed typical ferrimagnetic behaviour, which corresponds to that of CoFe2O4 nanoparticles. The toxicity evaluation of the synthesised HNPs on Chlorella vulgaris indicated that they can be applied to biomedical applications such as magnetic hyperthermia, photothermal therapy, drug delivery, bioimaging and biosensing.

Candida albicans is an opportunistic fungus that becomes pathogenic and problematic under certain biological conditions. C.albicans may cause painful and uncomfortable symptoms, as well as deaths in immunocompromised patients. Therefore, early detection of c.albicans is essential. However, conventional detection methods are costly, slow and inaccessible to women in remote or developing areas. To address these concerns, we have developed a wearable and discrete naked-eye detectable, colorimetric platform for c.albicans detection. With some modification, this platform is designed to be directly adhered to existing feminine hygiene pads. Our platform is rapid, inexpensive, user-friendly, disposable and only requires three steps: i) addition of vaginal fluid onto sample pads; ii) addition of gold nanoparticle gel and running buffer, and iii) naked eye detection. Our platform is underpinned by selective thiolated aptamer-based recognition of 1,3-β-D glucan molecules- a hallmark of c.albicans cell walls. In the absence of c.albicans, wearable sample pads turn bright pink. In the presence of c. albicans, the wearable pads turn dark blue due to significant nanoparticle target-induced aggregation. We demonstrate naked eye colorimetric detection of 4.4 ×106 c.albicans cells per ml. We believe that this proof-of-concept platform has the potential to have a significant impact on women’s health, globally.

Cuffless sphygmomanometers may be useful alternative blood pressure monitors for screening and home healthcare. The main requirements for these devices are accuracy in the resting state, accuracy during dynamic blood pressure changes, and long-term stability. Intermittent measurements can ensure that the accuracy of active measurements mirrors that of measurements in the resting and dynamic states. This brief report proposes a new protocol to evaluate long-term stability based on a comparison with a medically approved cuff-based automated sphygmomanometer rather than an auscultatory sphygmomanometer. Dynamic changes in blood pressure are not usually assessed based on intermittent measurement with an over-the-counter (OTC) sphygmomanometer. Thus, validation testing focused on the accuracy of the OTC cuffless sphygmomanometer in the resting state and the long-term stability of the device, and the results were similar to those of the cuff-based sphygmomanometer. Further research and discussions are necessary to develop standards derived from high-quality evidence for manufacturers of OTC sphygmomanometers.

Electric Vehicles (EVs) are increasing the interdependence of transportation policies and the electricity market. EMMEV (Electricity Market Model with Electric Vehicles) is an experimental agent-based model that analyses how carbon reduction policy in transportation may increase number of Electric Vehicles and how does that would influence on the electricity price. Agents are ESCOs (Energy Service Providers) which can distribute fuels and their objective is to maximize their profit. In this paper, EMMEV is used to analyze the impacts of the LCFS (Low Carbon Fuel Standard), a performance-based policy instrument, on electricity prices and EV sales. The agents in EMMEV/regulated parties in LCFS should meet a certain CI (Carbon Intensity) target for their distributed fuel. In case, they cannot meet the target, they should buy credit to compensate for their shortfall and if they exceed, they can sell their excess. The results, considering the assumptions and limitations of the model, show that the banking strategy of the agents contributing in the LCFS might have negative impact on penetration of EVs, unless there is a regular Credit Clearance to trade credits. It is also shown that the electricity price as result of implementing the LCFS and increasing number of EVs has increased between 2–3 percent depending on banking strategy.

Glioblastoma multiforme (GBM) is a glioma and the most aggressive type of brain tumor with a dismal average survival time, despite the standard of care. One promising alternative therapy is boron neutron capture therapy (BNCT), which is a noninvasive therapy for treating locally invasive malignant tumors, including glioma. BNCT involves boron-10-released radiation directly into tumor cells with minimal damage to healthy tissues. This therapy lacks clinically approved targeted blood-brain-barrier-permeating delivery vehicles for therapeutic drug/ boron-10. Nanoparticles, particularly gold nanoparticles (GNPs), are selective and effective drug-delivery vehicles because of their desirable properties, facile synthesis, and biocompatibility. This review discusses historical and current GNP therapeutic applications as a drug delivery vehicle for treating glioma. Furthermore, GNPs loaded with therapeutic drugs, imaging agents, and GBM-targeting antibodies/ peptides to treat GBM will be discussed. Additionally, the importance of upper and lower limits on therapeutic efficacy will be described and explored followed by highlighting their advantages, limitations, and possible toxicity. Recent research and selected important findings for GNP-mediated pharmaceutics in GBM will also be considered.

Complex models have received significant interest in recent years and are being increasingly used to explain the stochastic phenomenon with upward and downward fluctuation such as the stock market. Different from existing semi-variance methods in traditional integer dimension construction for two variables, this paper proposes a simplified multi-factorized fractional dimension derivation with the exact Excel tool algorithm involving the fractional center moment extension to covariance, which is a complex parameter average that is a multi-factorized extension to Pearson covariance. By examining the peaks and troughs of gold price averages, the proposed algorithm provides more insight into revealing underlying stock market trends to see who is the financial market leader during good economic times. The calculation results demonstrate that the complex covariance is able to distinguish subtle differences among stock market performances and gold prices for the same field that the two variable covariance may overlook. We take the London, Tokyo, Shanghai, Toronto and Nasdaq as the representative examples.

Optical materials with a tunable localized surface plasmon resonance (LSPR) are of a great interest for applications in photonics and optoelectronics. In the present study we explored the potential of generating the LSPR band with an ultra-broad range of over 1000 nm in gold nanoparticles (NPs) precipitated through the thermal treatment in ZnO-Al2O3-SiO2 glass. Using the optical absorption spectroscopy, we demonstrated that the LSPR band's position and shape can be finely controlled by varying the thermal treatment route. Comprehensive methods including Raman spectroscopy, X-ray diffraction and high-resolution transmission electron microscopy were used to study the glass structure, while computational approaches were used for the theoretical description of the absorption spectra. Obtained results allowed us to suggest a scenario responsible for such abnormal LSPR band broadening which includes possible interparticle plasmonic coupling effect taking place during the liquid-liquid phase separation of the heat-treated glass. The formation of gold NPs with an ultra-broad LSPR band in glasses holds promise for sensitizing rare earth ion luminescence for new photonics devices.

Gold is a significant revenue source for custom copper smelters facing profitability challenges due to low treatment and refining charges, stricter regulations, and rising costs. Gold is also often blended with copper concentrates, but precise recovery rates from smelting processes are poorly documented despite gold critical economic importance. This paper aims to provide the first comprehensive estimates of gold first-pass recovery across various operational units within the copper sulfide concentrate processing flowsheet. It evaluates the effectiveness of different copper smelting and converting technologies in recovering gold. Optimizing gold first-pass recovery is especially important to enhance immediate financial returns and responsiveness to market dynamics, allowing companies to capitalize on favorable gold prices without delays. Given the absence of direct measurements for gold recovery rates, this research develops an estimation method based on understanding gold loss mechanisms during smelting. The study identifies and analyzes key input and output parameters by examining data from various copper producers. By correlating these parameters with gold loss, the research estimates gold first-pass recovery rates within the copper smelting process. Among integrated smelting-converting routes, the flash smelting to Peirce-Smith converting route achieves the highest gold first-pass recovery (98.8–99.5%), followed by the Mitsubishi continuous smelting and converting process (94.3–99.8%), bottom-blowing smelting to bottom-blowing converting (95.8%), flash smelting to flash converting (95.5%), Teniente smelting to Peirce-Smith converting (95.2%), and the Noranda continuous smelting and converting process (94.8%). The final recovery rates are expected to be higher considering the by-products internal recirculation and post-processing within the copper flowsheet. Additionally, superior gold recoveries are attributed to advanced metallurgical practices and control systems, which vary even among companies with similar technologies. The research demonstrates that copper smelting can effectively recover over 99% of gold from sulfide concentrates. Gold accumulates up to 1000 times its original concentration in anode slime during electrolytic refining, generating 5-10 kilograms of slime per ton of copper, which is further processed to recover gold and other by-products. Major smelters operate precious metal plants where recovering gold from highly concentrated anode slime is both cost-effective and efficient.

Conventional X-ray therapy (XRT) is commonly applied to suppress cancerous tumors, however it often inflicts collateral damage to nearby healthy tissue. In order to provide a better conformity of the dose distribution in the irradiated tumor, proton therapy (PT) is increasingly being used to treat solid tumors. Furthermore, radiosensitization with gold nanoparticles (GNPs) has been extensively studied to increase the therapeutic ratio. The mechanism of radiosensitization is assumed to be connected with an enhancement of the absorbed dose due to huge photoelectric cross-sections with gold. Nevertheless, numerous theoretical studies mostly based on Monte Carlo (MC) simulations did not provide consistent and thorough picture of dose enhancement and, therefore, radiosensitization effect. Radiosensitization by nanoparticles in PT is even less studied than in XRT. Therefore, we investigate physics picture of GNP-enhanced RT using MC simulation with Geant4 equipped with the most recent physics models, taking into account a wide range of physics processes relevant for realistic PT and XRT. Namely, we measured dose enhancement factors in the vicinity of GNP with diameters ranging from 10 nm to 80 nm. The dose enhancement in the vicinity of GNP reaches high values for XRT, while it is very modest for PT. The macroscopic dose enhancement factors for realistic therapeutic GNP concentrations are rather low for all RT scenarios, therefore other physicochemical and biological mechanisms should be additionally invoked for an explanation of the radiosensitization effect observed in many experiments.

: Since the COVID-19 pandemic, people have become aware that materials (products) can transmit infection and have begun to focus on questions such as how bacteria and germs, the sources of in-fection, maintain their infectivity on material surfaces, and the extent to which materials can or cannot prevent this. and to what extent materials can and cannot prevent it. The SIAA, a non-profit organization of many Japanese companies, had created an entirely separate interna-tional standard for materials' antibacterial, antiviral, and antibiofilm properties (products). The authors have studied the academic basis for the operation of the standards and were deeply in-volved as researchers in establishing one of the standards. This paper describes the interna-tional standards and some representative examples of the authors' actual use of these standards and explains the current status and future problems.

This study proposes a framework to integrate Sustainability within Management Systems Standards and subsequently implement and disclose Sustainable Development goals and results. Moreover, it investigates the SD goals (SDGs) and results (SDRs) that Portuguese organizations with Integrated Management Systems (IMSs) disclose to their interest parties. The study, supported by content analysis, highlights that the four more frequently disclosed SDGs are “life on land“(50.0%), “industry, innovation, and infrastructure” (47.1%), “responsible consumption and production” (47.1%), and “partnerships for the goals” (47.1%). Conversely, the four SDRs most frequently disclosed are “employment” (82.4%), “economic performance” (79.4%), “anti-corruption” (64.7%), and “occupational health and safety” (61.8%). Hence, SDGs disclosure emphasizes the environmental dimension, while SDRs disclosure highlights the social dimension (economic dimension present in both SDGs and SDRs). Finally, the disclosure of SDGs and SDRs in institutional reports presents a positive and strong correlation that is statistically significant. Overall, the contributions of this research are twofold. First, it supports the integration of the SDGs within organizations, and second, it stimulates the demonstration of their impacts on the SDGs (the SDRs).

In response to the increasing importance of knowledge as a key competitive advantage, the role of knowledge management in value creation cannot be overstated. The International Standards Organization (ISO) has recognized this and announced a Management Standard for Knowledge Management Systems (KMS). This initiative is significant because, by viewing knowledge strategically, organizations are seeking ways to enhance their processes and align them to address their challenges. A synergistic effect can be achieved when another management system highly relevant to KMS is joined and later integrated. This new system is Artificial Intelligence Management (AIMS). The paper is structured as follows: Firstly, we explore knowledge and knowledge management (KM), along with the challenges companies face in implementing and operating KM. Next, we examine the ISO 30401:2018 standard as a guide for KM implementation. Finally, we discuss how ISO 30401:2018 and ISO/IEC 42001:2023 can help solve key organizational problems and support machine learning and knowledge extraction through AI. In conclusion, we summarize the key outcomes of the paper. The main purpose of the paper is to determine how these standards contribute to solving practical problems in the creation and development of a knowledge management system supported by artificial intelligence and to demonstrate their synergistic effect when used together.

A sensory profile provides important information on the qualitative and quantitative properties of cheeses. Thus, tasters must be trained with reference standards that allow the calibration of the panel around shared sensory definitions. The ideal standard is simple to prepare, easily reproducible, discriminant and specific for the product evaluated. Therefore, commercial products and pure chemicals, which are currently implemented as reference standards, are not suitable. Furthermore, the lack of common practices in the dairy sectors has been widely highlighted. This study aimed to establish new and reproducible reference standards for the gustatory and olfactory descriptors of cheeses. Using casein, maize starch, powder skimmed milk and k-carrageenan, a tasteless and odourless product like a fresh cheese was produced. At this matrix, 20 odour and taste compounds have been added to obtain standards that have been evaluated by 60 tasters so as to define their recognisability and perceived intensity. These cheese standards are easy to reproduce, are stable and exhibited good recognisability. Overall, the reference standards proposed are suitable for the panel training and are a starting point for standardising practices and lexicon, thus enabling the comparability of sensory studies on cheese.

The purpose of this study was to select target nutrients to be included in the nutritional standards of school lunches in Korea. The dietary intake data of children and adolescents aged 6-17 years old from the Korea National Health and Nutrition Examination Survey Ⅵ were analyzed for eight groups based on gender and age (6-8, 9-11, 12-14, and 15-17 years old). First, the usual intake of the 3,091 subjects was estimated and assessed to identify nutrients with insufficient or excessive intake prevalence. Along with the nutrients identified by the assessment, the energy and nutrients prioritized in the meal planning procedure of the 2015 Dietary Reference Intakes for Koreans were the initial candidates: energy, the percentages of energy from carbohydrates, protein, and fat, vitamin A, riboflavin, niacin, vitamin C, calcium, phosphorus, sodium, and iron. Phosphorus was excluded due to little evidence of clinical symptoms caused by insufficient intake. Sodium was excluded because reliable data on added salt were not available among the school lunch recipes in Korea. Therefore, energy, the percentages of energy from carbohydrates, protein, and fat, vitamin A, riboflavin, niacin, vitamin C, calcium, and iron were selected to be included in the nutritional standards of school lunches in Korea.

XPS and ARXPS characterization of surface layers resulting from the functionalization of polymers such as PVC modified with MPTMS and APTES is challenging due to the signals overlap, deriving both from the substrate and the functionalized layers. In this work, a freshly cleaved, ideally flat gold surface was used as carbon-free model substrate functionalized with MPTMS and subsequently grafted with APTES. Avoiding the overlap of signals from carbon atoms present in the substrate, the signals in the C1s, O1s, Si2p, S2p and N1s high-resolution spectra could be assigned to the MPTMS / APTES functionalized layer only and the curve fitting parameters could be determined. Quantitative analysis was in very good agreement with the expected stoichiometry of the functionalized layer, confirming the adopted curve fitting procedure. In addition, it was found that one molecule of APTES grafted two MPTMS via silane groups. ARXPS allowed determining the thickness of the functionalized layers: MPTMS thickness was found to be 0.5 (0.2) nm, MPTMS + APTES thickness 1.0 (0.2) nm in good agreement with Avogadro model calculations. This approach can be considered a powerful tool for characterising functionalized surfaces of more complex systems by XPS.

Oil and petroleum are strategic resources of great importance to national security. Petroleum and hydrothermal gold deposits may form together, with similar evolutionary trends in their formation, migration, and enrichment. Petroleum reservoirs and gold deposits are closely coupled under certain geological conditions. The solubility of gold in crude oil and its forms of occurrence are important in determining the mechanisms of interaction between gold and petroleum and in facilitating the recovery of gold from gold-bearing petroleum. In this study, the occurrence of gold in crude oil from the Linnan Depression in the Bohai Bay Basin, China, was studied using inductively coupled plasma–mass spectrometry and X-ray photoelectron spectroscopy. Concentrations of gold in crude oil from the Linpan and Shanghe oilfields averaged 44.5 ppb, which is well above the minimum concentration required for hydrothermal gold mineralization. Gold has an affinity with carbon, oxygen, and sulfur, and its concentration in crude oil is positively correlated with total acid and sulfur contents. We speculate that gold may exist in crude oil as complexes with organic acids or thiols, with crude oil thus being a transport medium for gold.

Nanoparticles (NPs) have uniform chemical composition, size, and morphology. Microorganisms are of great interest in Nanoparticle synthesis. The green production of nanomaterials occurs either intracellularly or extracellularly. Gold and silver nanoparticles are mostly synthesised by the enzymatic degradation of metal ions. The produced NPs are characterized by different instruments such as ultraviolet visible, dynamic light scattering, x-ray diffraction, scanning electron microscope, transmission electron microscope, etc. Our review discusses the various biomedical applications of gold and silver nanoparticles synthesized by microbes via intracellular and extracellular mechanisms.

3D metal nanostructures are often the basis of several applications such as in catalysis, plasmonics, medical diagnosis, therapy, drug screening, ophthalmologic, and biomedical applications. Porous gold nanoparticles (PGNs) are intensively investigated due to their outstanding morphological as well as advantageous optical properties. Unfortunately, the thermal stability of these open-porous structures is poor, i.e. even as a result of low-temperature annealing (150$^\circ$C in air), their porosity disappears and they lose their favorable optical properties. In order to preserve their beneficial properties, a thin metal oxide coating can be applied. Changing the coating's thickness and/or composition, the optical response of the PGNs can also be tuned in a wide wavelength region. Moreover, these nanoparticles can be synthesized also in support-free form, which makes them more attractive from an application point of view. This review article summarizes some of the preparation modes of these complex nanostructures (fixed and support-free), as well as their thermal stability and optical responses.

The Sanhetun tellurium-gold (Te-Au) deposit, located in the Duobaoshan polymetallic metallogenic belt (DPMB) within the eastern section of the Central Asian Orogenic Belt (CAOB), is a newly discovered small scale gold deposit. The mineralization, with resource of ≥ 4t Au, is mainly hosted in 3 NNE-trending alteration zones between granitic mylonite and volcanogenic-sedimentary formations. It’s the genesis and timing of formation of this deposit are poorly constrained. Here, we report the results of petrographic studies, TESCAN Integrated Mineral Analyzer (TIMA), major and trace element concentrations, and in situ S isotope of pyrite and U-Pb ages of calcite. The results show that there are five species of telluride, including native tellurium, tetradymite, tsumoite, hessite and petzite and four types of pyrite, including coarse-grained euhedral Py1, fine-grained quartz-Py2 vein crosscutting Py1 and anhedral aggregated Py3 and Py4. The pre-ore Py1, containing negligible Au, Te and other trace elements, have a relatively narrow range of δ34S values ranging from -1.20 to -0.57‰. The Py2 have slightly high concentrations of Au and Te and distinctly high concentrations of Mo, Sb, Zn and Mn with markedly positive δ34S values of 4.67 to 14.43‰. The main ore stage Py3 contains high Au and Te concentrations and shows narrow δ34S values ranging from -5.69 to 0.19‰. The post-ore stage Py4 contains low Au concentrations with the δ34S values ranging from 2.66 to 3.86‰. Calcite from ore stage yield a U-Pb age of 135 ± 22 Ma, interpreted as the age of Te-Au mineralization. Our geochemical and geochronological data indicate that the Te was derived from partial melting of mantle metasomatized by the Te-rich fluids that originated from oceanic sediments. We correlate the tectonic setting with the subduction of Paleo Pacific plate in Early Cretaceous.

The manuscript presents the optical properties of directly deposited films of gold nanoparticles (AuNPs) prepared by ultrasonic spray pyrolysis technology. Four samples were produced, with an AuNPs deposition time of 15 min, 30 min, 1h and 4h on the glass substrate. The morphological characterization of the deposited films showed that the size of the first deposited AuNPs is between 10 and 20 nm, while with a longer duration of the deposition process, larger clusters of AuNPs grow by coalescence and aggregation. The prepared layers were optically characterised with Ultraviolet–visible spectroscopy (UV-vis) and ellipsometry. The ellipsometric measurements showed an increasingly denser and thicker effective thickness of the AuNPs layers. The extinction spectra display a clear local surface plasmonic resonance (LSPR) signature (peak 520-540 nm), indicating the presence of isolated particles in all samples. For all AuNPs layers, the imaginary part of both ε// and ε⏊ is dominated by a central peak around 2.2 eV corresponding to the LSPR of isolated particles and a high-energy shoulder due to Au interband transitions. It is shown that, as the density of particles increases, the extinction cross section grows over the whole spectral range where measurements are taken. Thus response can be explained with an enhanced electromagnetic response among AuNPs, that can be connected to the increase of particle density but also by the formation of clusters and irregular structures.

Ensuring safe, high-quality food is an ongoing priority, yet consumers face heightened risk from foodborne pathogens due to extended supply chains and climate change in food industry. Nanomaterial-based assays are popular and have recently been developed to ensure food safety and high quality. This review discusses strategies for using nanomaterials in colorimetric biosensors. Localized surface plasmon resonance (LSPR) biosensors are commonly utilized for colorimetric biosensing. Several emerging technologies aimed at simple and rapid immunoassays for onsite applications have been introduced in the food industry. In the foreseeable future, field-friendly colorimetric biosensors could be adopted in food monitoring systems. The onsite and real-time detection of possible contaminants and biological substances in food and water is essential to ensure human health safety.

A gold(I) complex with a triphenylphosphine and a monodentate N,N-dimethyldithiocarbamate ligand was synthesized and characterized by Raman spectroscopy and single crystal X-ray diffraction. DFT calculations (Gaussian 09, PBE1PBE/Lanl2dz) were undertaken for a single complex in the gas-phase. The DFT-optimized structure is in good agreement with the crystal structure and the DFT-calculated Raman spectrum also is in excellent agreement with the experimental spectrum. Assignments of the Raman peaks are based on these DFT calculations. Frontier molecular orbitals were calculated and their nature is discussed.

The energy transition is a complicated process that involves changing production and consumption habits, boosting the use of renewable energy sources, and reducing greenhouse gas emissions. This article examines the management of risks associated with this shift, focusing on investment, commercial, technological, regulatory, and environmental challenges. The paper proposes an effective way for dealing with new difficulties by assessing risks and the management techniques that accompany them. Furthermore, as a critical component of the energy revolution, the concept of Nearly Zero Energy Buildings (NZEB) is given, with a focus on the ambitions of INGV – Irpina Headquarters and the EU regulatory framework. Finally, the actions and methods employed to achieve the NZEB objectives are discussed, including the utilization of cutting-edge technologies and renewable energy sources. Furthermore, the concept of Nearly Zero Energy Buildings (NZEB) is introduced as an important component of the energy transition, with an emphasis on the European regulatory framework and the ambitions of the INGV – Irpina Headquarters. Finally, the interventions and techniques employed to achieve the NZEB targets are highlighted, such as the employment of advanced technologies and renewable energy resources. This study contributes significantly to understanding the processes and issues associated with the energy transition and the implementation of NZEB, hence boosting sustainability in the construction sector.

A polyphasic taxonomic study was carried out on the rod-shaped, orange pigmented strain C11T, isolated from gold mine tailings. Sequencing of the 16S rRNA gene showed relatedness to Brevundimonas, with 98.4 % and 98.2 % similarity to Brevundimonas bacteroides and Brevundimonas variabilis, respectively. Average nucleotide identity and digital DNA–DNA hybridization with the closest phylogenetic neighbor of C11T indicates distinction at the species level, further confirmed by differences in physiology. C18:1 ω7c is the dominant cellular fatty acid. DNA G + C content is 68.3 mol %. The predominant ubiquinone is Q-10; 1,2-Di-O-acyl-3-O-α-D-glucopyranuronosyl glycerol, phosphatidylglycerol, 1,2-di-O-acyl-3-O-α-D-glucopyranosyl glycerol and 1,2-di-O-acyl-3-O-[D-glucopyranosyl-(1->4)-α-D-glucopyranuronosyl] glycerol are the major polar lipid constituents. This bacterium produces bacteriochlorophyll a and tolerates high concentrations of (μg/mL): tellurium (>1500), selenium (1000 to >5000), and vanadium (&gt;5000) oxyanions. Data supports the inclusion of C11T into the genus Brevundimonas as a new species with the proposed name Brevundimonas aurifodinae sp. nov., (C11T = NRRL B-61758T; = DSM 118059T).

Currently available DNA detection techniques frequently require compromises between simplicity, speed, accuracy, and cost. Here, we propose a simple, label-free and cost-effective DNA detection platform developed at screen printed carbon electrodes (SPCEs) modified with reduced graphene oxide (RGO) and gold nanoparticles (AuNPs). The preparation of the detection platform involved a two-step electrochemical procedure based on GO reduction onto SPCEs followed by the electrochemical reduction of HAuCl4 to facilitate the post-grafting reaction with AuNPs. The final sensor was fabricated by the simple physical adsorption of a single-stranded DNA (ssDNA) probe onto AuNPs-RGO/SPCE electrode. Each preparation step was confirmed by morphological and structural characterization using scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy, respectively. Furthermore, the electrochemical properties of the modified electrodes have been investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The results demonstrated that the introduction of AuNPs onto RGO/SPCEs led to an enhancement in surface conductivity, characteristic that favored an increased sensitivity in detection. The detection process relied on the change in the electrochemical signal induced by the binding of target DNA to the bioreceptor, and was monitored particularly by the change in the charge transfer resistance of a [Fe(CN)6]4−/3− redox couple added in the test solution.

Gold- and MnO₂- nanozymes are well-known for their enzyme-like activity. In this regard, initially, gold- and MnO₂- nanozymes were synthesized by simple and green methods. Afterward, the kinetic studies were performed using the Michaelis–Menten model for both gold- and MnO₂- nanozymes. The kinetic parameters including K_m and V_max were calculated via the construction of the linear plot of Lineweaver–Burk for both nanozymes. The results showed a V_max and K_m of 185 nM sec^-1 and 47 nM sec^-1 for the gold- and MnO₂- nanozymes, in order. The ratio of V_max(gold)/V_max(MnO₂) was found to be about 4.0 which pointed that the catalytic efficiency of gold-nanozymes is 4.0-fold higher than the catalytic efficiency of MnO₂- nanozymes. The K_m value was found to be 0.72 mM and 1.6 mM for the as-prepared gold- and MnO₂- nanozymes, respectively, and the K_m of MnO₂-nanozymes is 2.2-fold higher than that of gold nanozymes. Since the Km shows the affinity of substrate for binding to nanozyme active nodes (lower K_m=higher affinity), it is consultable that the substrate affinity toward MnO₂-nanozymes is 2.2-fold lower than that of the gold-nanozymes. Considering the above results, the as-prepared gold nanozymes are very stronger peroxidase-like mimics than the metal oxide MnO₂-nanozymes.

It has been suggested that particle size plays an important role in determining the genotoxicity of gold nanoparticles (GNPs). The purpose of this study was to compare the potential radio-sensitization effects of two different sized GNPs (3.9 and 37.4 nm) fabricated and examined in vitro in Lewis Lung carcinoma (LLC) as a model of non-small cell lung cancer through use of comet and clonogenic assays. After the treatment of 2Gy X-ray irradiation, both particle sizes demonstrated increased DNA damage when compared to treatment with particles only and radiation alone. This radio-sensitization was further translated into a reduction in cell survival demonstrated by clonogenicity. This work indicates that GNPs of both sizes induce DNA damage in LLC cells at the tested concentrations, whereas the 37.4 nm particle size treatment group demonstrated greater significance in vitro. The presented data aids in the evaluation of the radiobiological response of Lewis Lung carcinoma cells treated with gold nanoparticles.

Porins are crucial proteins located in the outer membrane that directly influence antimicrobial resistance mechanisms and virulence in bacteria. In this study, a porin gene (Vp-porin) was cloned in V. parahaemolyticus, and the function of Vp-porin on biological characteristics and virulence was investigated. The results of sequence analysis showed that Vp-porin is highly conserved in Vibrio spp. and the predicted 3D structure showed it could form a transmembrane channel with 20 β barrel. Membrane permeabilization provides evidence that membrane integrity of ∆Vp-porin was damaged and the sensitivity to tetracycline, polymyxin B, rifampicin and cephalothin of ∆Vp-porin obvious increased. In addition, loss of Vp-porin damaged motility due to down-regulated flagellar synthesis. Besides, ∆Vp-porin exhibited attenuated cytotoxicity to Tetra-hymena. The relative survival rate of Tetrahymena infection with ∆Vp-porin was 86%, which is much high than that with WT (49%). Take together, Vp-porin in V. parahaemolyticus plays various roles in biological characteristics in membrane integrity, antimicrobial resistance and motility, and contributes to virulence.

Gold nanoparticles have been increasingly used in several electronic, material fabrication, and biomedical applications. Several methods have been reported to prepare gold nanoparticles of various shapes and sizes with different photophysical properties. Although useful to prepare gold nanoparticles, most of the methods are not stable enough and undergo degradation, if stored at room temperatures (up to 30 °C) for a few days. In this paper, we report a novel environmentally friendly method to synthesize self-assembled gold nanoparticles in cruciform shapes by using leaf extract of Cannabis indica as a reducing agent without the aid of any polymers or additional chemicals. The nanoparticles are found to be stable for more than a month when stored at room temperature (30 °C). They were able to form stable conjugates with bovine α-lactalbumin protein that may possess anti-cancerous properties.

The quantitative and qualitative assessment of gold grains from samples of glacial till is a well-established method for exploring gold deposits hidden under glaciated cover. This method, widely used by the industry and which produced numerous successes in locating gold deposits in glaciated terrain, is still based on artisanal gravity separation techniques and visual identification. However, being artisanal, it is limited by inconsistent recoveries and the difficulty to visually identify the predominantly occurring small gold grains. These limitations hinder its capability to deceipher subtle or complex signal. To improve detection limits through recovery of small gold grains, a new approach has recently been introduced in the industry (commercially referred as “ARTGold” procedure) using an optimized miniature sluice box coupled with an automated scanning electron microscopy routine. The capabilities of this improved method are highlighted by comparing till surveys conducted around the Borden gold deposit (Ontario, Canada) using the conventional and improved methods at both local and regional scales. Relative to the conventional approach, the improved method recovered almost one order of magnitude more gold grains from samples (regional and down-ice mineralization), dominantly in small size fractions. Increasing the counts in low-abundance regional samples enables better discrimination between background signals and significant dispersions. The method offers an alternative to improve characterization of gold dispersal in glaciated terrain and the related gold deposit footprints.

During the long-term operation of the plasma reactor, decreases in the plasma concentration were noticed despite the constant maintenance of all parameters. One of the factors is the decrease of the nitrogen content on the surface of the electrode, in order to eliminate it, the supply voltage has been increased to 11 kV. The next decisive factor in the decrease of plasma concentration is the oxidation of the electrode surface, therefore two electrodes were used: first one with solid gold and the other one copper covered with galvanized gold with a thickness of 10 μm. During the experiment, a large decrease in plasma concentration was observed when the electrode coated by gold was used. High-energy electrons have knocked out the gold atoms from the electrode, as a result of which the gold evaporated and the raids layers formed. After a month of working of the electrodes, metallographic researches were carried out, the results of which are described in this publication.

Conventional models do not fully explain composition of the solar system – for example, the presence of p-nuclei and post-post-Fe-nuclei remains not yet understood (and is one of the great unresolved puzzles of nuclear astrophysics in general); other puzzles exist. We offer a hypothesis which can explain the appearance of non-native elements in the solar system, and a feasible scenario for its implementation. The hypothesis suggests that a nuclear-fission "event" occurred in the inner part of the solar system at the time currently defined as the birth of the system. Conventional models have never considered fission as a contributing nuclei-production mechanism. Upon examination of the existing models and factual data (presented in volumes of publications but never combined into an aggregate), we identified one plausible scenario by which a fission event (not demolishing the entire solar system) could occur: an encounter with a compact super-dense stellar "fragment" (with specific properties) and its "explosion" in fission-cascades. Such scenario also helps resolve other long-standing puzzles of the solar system. For example, it provides that the fission-produced nuclei subsequently transformed into the material that (eventually) accreted into the "rocky" objects in the system (terrestrial planets, asteroids, etc.) and enriched the pre-existed hydrogen-helium objects (the Sun and the gaseous giants) – this offers an explanation for the planets’ inner position and compositional differences within the predominantly hydrogen-helium rest of the solar system. Other implications also follow.

Artisanal and small-scale gold mining (ASGM) has been an important source of income for communities in the Madre de Dios River Basin in Peru for hundreds of years. However, in recent decades, the scale of ASGM activities in the region has increased dramatically, and exposures to a variety of occupational and environmental hazards related to ASGM, including mercury, are becoming more widespread. The aims of our study were to: (1) examine patterns in the total hair mercury level of human participants in several communities in the region and compare these results to the 2.2 µg/g total hair mercury level equivalent to the World Health Organization (WHO) Expert Committee of Food Additives (JECFA)’s Provisional Tolerable Weekly Intake (PTWI); and (2), to measure the mercury levels of paco (Piaractus brachypomus) fish raised in local aquaculture ponds, in order to compare these levels to the EPA Fish Tissue Residue Criterion of 0.3 µg Hg/g fish (wet weight). We collected hair samples from 80 participants in four communities (one control and three where ASGM activities occurred) in the region, and collected 111 samples from fish raised in 24 local aquaculture farms. We then analyzed the samples for total mercury. Total mercury levels in hair were statistically significantly higher in the mining communities than in the control community, and increased with increasing distance away from the Madre de Dios headwaters (as the crow flies), did not differ by sex, and frequently exceeded the reference level. Regression analyses indicated that higher hair mercury levels were associated with residence in ASGM communities. The analysis of paco fish samples found no samples that exceeded the EPA tissue residue criterion. Collectively, these results align with other recent studies showing that ASGM activities are associated with elevated human mercury exposure. The fish farmed through the relatively new process of aquaculture in ASGM areas appeared to have little potential to contribute to human mercury exposure. More research is needed on human health risks associated with ASGM to discern occupational, residential, and nutritional exposure, especially through tracking temporal changes in mercury levels as fish ponds age, and assessing levels in different farmed fish species. Additionally, research is needed to definitively determine that elevated mercury levels in humans and fish result from the elemental mercury from mining, rather than from a different source, such as the mercury released from soil erosion during deforestation events from mining or other activities.

This paper presents a novel normative framework for assessing granular base materials in rigid pavements, incorporating evaluations of California Bearing Ratio (CBR) alongside hydraulic conductivity tests. A critical component of this research adheres to Federal Highway Administration (FHWA) standards, which specify a permeability coefficient range of 0.05 to 0.20 cm/sec. Our investigations indicate that increased compaction energy inversely affects permeability, highlighting a sophisticated interplay between compaction dynamics and hydraulic characteristics. The study further elucidates that CBR values are profoundly impacted by the content of coarse-grained soil, advocating for a tailored approach to base layer assessment. Multivariable CBR analysis facilitated the identification of an optimal water content, underscoring that maintaining a minimum 80% CBR—while minimizing water content—can mitigate fatigue effects and enhance structural performance under heightened energy conditions. This research proposes bespoke, scientifically validated standards that integrate local geotechnical nuances, aimed at refining material selection processes and extending the durability of pavement infrastructures through foundational yet meticulous geotechnical evaluations.

(1) Background: Rational use of medicines (RUM) and their assessment is important to ensure optimal use of resources and patient care in hospitals. These assessments are essential to identifying practice gaps for quality improvement. (2) Methods: Assessment of adherence to WHO/ International Network for Rational Use of Drugs core prescribing indicators among out-patients in 2021 was conducted at the University Hospital of the Kwame Nkrumah University of Science and Technology in the Ashanti region of Ghana. We reviewed electronic medical records (EMR) of 110,280 patient encounters in the year which resulted in 336,087 medicines prescribed. (3) Results: The average number of medicines prescribed per encounter was 3 with generics being prescribed in 76% of prescriptions. Injections were prescribed in 7% of encounters while 90% of medicines were from Ghana’s Essential Medicines List 2017. (4) Conclusions: With the exception of patient encounters with injections, all prescribing indicators assessed in this study did not meet WHO optimum levels providing targets for quality improvement in RUM. Implementing prescribing guides and policies, regular audits and feedback as well as continuous professional development training may help to improve prescribing practices in the hospital.

1) Background: The use of linked data in Semantic Web are promising approaches to add value to nutrition research. An ontology, which defines the logical relationships between well-defined taxonomic terms, enables linking and harmonizing research output. To enable the description of domain-specific output in nutritional epidemiology, we propose the Ontology for Nutritional Epidemiology (ONE) according to authoritative guidance for nutritional epidemiologic research; 2) Methods: First, a scoping review was conducted to identify existing ontology terms for reuse in ONE. Second, existing data standards and manuscript reporting guidelines for nutritional epidemiology were converted into ontology, and the terms used in the standards were summarized and listed separately in a taxonomic hierarchy. Third, the ontologies of the nutritional epidemiologic standards, reporting guidelines and the core concepts were gathered in ONE. Three case studies were illustrated for its potential applications. (i) annotation of existing manuscripts and data, (ii) ontology-based inference, and (iii) estimation of reporting completeness in a sample of nine manuscripts; 3) Results: Ontologies for “food and nutrition” (n=33), “disease and special population” (n=86), “data description” (n=21), “research description” (n=32) and “supplementary (meta) data description” (n=44) were reviewed and listed. ONE consists of 339 classes (79 new classes to describe nutrition data and 24 new classes to describe the content of nutrition manuscripts). The case studies demonstrated the application of ONE. 4) Conclusion: ONE is a resource to automate data integration, searching and browsing, and can be used to assess reporting completeness in nutritional epidemiology.

Brazilian garimpeiros are a highly hard-to-reach and mobile population, with little access to basic hygiene and health services, and have been crossing the border to work irregularly in gold mines in French Guiana since the 90s. This study aimed to characterize this population and identify their main health problems. A cross-sectional study was carried out in the municipality of Oiapoque-AP, with two surveys: before (2018) and after (2019) the implementation of Malakit. Individuals were recruited from resting places and submitted to a questionnaire with demographic variables, history and knowledge of malaria, and health issues in the mines. Simultaneously, a clinical evaluation was performed. The garimpeiros were mainly men from Maranhão, Pará, and Amapá, with a low educational level and worked on average for 10 years in the mining sites. The study population mentioned numerous health problems: malaria, followed by leishmaniasis, flu, body aches, headaches, and digestive problems. Other diseases mentioned were skin diseases, bat bites, hepatitis, and HIV infection. This vulnerable population is constantly subjected to heavy routines and exposed to different diseases and infections that can spread across borders. Knowledge of this is essential for developing public health policies that can be integrated into specific epidemiological situations.

In this work, a colorimetric indicator based on gold nanoparticles (AuNP) and a biodegradable and eco-friendly polymer (sodium alginate, Alg.), has been developed, for the real-time detection of fish spoilage products. AuNP and colorimetric indicator were characterized by: UV-Vis, FTIR spectroscopies, TGA, DSC, XRD, TEM, and colorimetry. The UV-Vis spectrum and TEM showed the successful synthesis, the spherical shape, and the size of AuNPs. Results indicated color changes of the indicator in packaged fish on day 9 of storage at refrigerated temperature (5ºC). These results showed the successful application of colorimetric indicator in the detection of TVB-N in packaged fish.

We describe a competitive colorimetric assay that enables rapid and sensitive detection of galactose and reduced nicotinamide adenine dinucleotide (NADH) via colorimetric readouts and demon-strates its usefulness for monitoring NAD+-driven enzymatic reactions. We present a sensitive plasmonic sensing approach for assessing galactose concentration and the presence of NADH using galactose dehydrogenase immobilized gold nanostars (AuNS-PVP-GalDH). The AuNS-PVP-GalDH assay remains turquoise blue in the absence of galactose and NADH; however, as galactose and NADH concentrations grow, the reaction well color changes to a characteristic red color in the presence of an alkaline environment and metal ions catalyst (detection solution). As a result, when galactose is sensed in the presence of H2O2, the colored response of the AuNS-PVP-GalDH assay transforms from turquoise blue to light pink, then to wine red in a con-centration-dependent manner discernible to the human eye. This competitive AuNS-PVP-GalDH assay could be a viable analytical tool for rapid and convenient galactose quantification in re-source-limited areas.

A multispectral superconducting nanowire single photon detector sensitive to different incident photon wavelength bands, is proposed. The SNSPD consists of a Distributed Bragg Reflector, a gold mirror, and two regions employing four NbN nanowires. Using the DBR both as a filter and a reflector, two distinct detection bands are created. The first detection band has a peak absorbance of > 0.75 at a wavelength of 1143 nm, while the second band has an absorbance of > 0.70 in the wavelength range 1440 to 2000 nm. The design of the device can be tuned to provide sensitivity in different wavelength bands. While SNSPDs do not typically provide photon wavelength sensitivity, the band-selection design proposed in this work opens up potential applications for future quantum communication technology.

The gold nanoparticle (AuNP) was synthesized using the well-known Turkevich method. This article explains didactic step-by-step of the synthesis, showing pictures of the entire process, including a well-explained mechanism and characterization study. The synthesis includes the reduction of NaAuCl4 using sodium citrate in high temperature (around 90 ⁰C). The two main mechanisms used to explain the AuNP synthesis via Turkevich method were explained. The first mechanism considerate that a nanowire intermediary and the other proposed that aggregate intermediates are not formed at any time during the synthesis. The materials (NaAuCl4 and AuNP) were characterized by UV-Vis, SEM, AFM, XRD and DLS. The UV-Vis exhibit an absorption maximum in 521 nm because the surface plasmon resonance (SPR) absorption band of AuNP. The SEM images of NaAuCl4 presents crystals with cubic shapes, while the AuNP presents average particle size of about 16-25 nm and particles that appear mainly spherical. To confirm the particles shapes, the AFM was conducted and it was possible to observe clearly the individual spherical nanoparticles. The XRD of AuNP showed the four main characteristic peaks for silver corresponding to (111), (200), (220) and (311) planes, confirming the cubic (FCC) silver. The DLS presented the average particle size of 3.3 ± 0.9 nm and the polydispersity index (PDI) of 0.574. In summary, the AuNP was synthesized using a simple and fast method. The result was a spherical and ultrasmall particle, that can be used is several applications.

This study aims at investigating the catalytic performance of Pd, Pd/Pt, and Pd/Au nanocatalysts toward the 2-propanol electro-oxidation reaction (2POR) in an alkaline medium. The catalyst components (Pd, Pt, and Au) were sequentially electrodeposited onto a glassy carbon (GC) electrode surface and further characterized using electrochemical (cyclic voltammetry (CV)) and materials (Field-emission scanning electron microscopy (FE-SEM) coupled with energy dispersive X-ray (EDX)) characterization methods. The Pd/Au/GC catalyst showed the highest catalytic activity in terms of the highest oxidation current (0.386 mA) and the highest stability in terms of the highest obtained current after 1800 s of continuous electrolysis. This behaviour was attributed to the enhancement in the charge transfer kinetics where the Pd/Au/GC catalysts acquired the lowest charge transfer resistance (Rct, 1.85 kΩ) during the 2POR.

Gold nanoparticles (AuNPs) are promising candidates in various biomedical applications such as sensors, imaging, and cancer therapy. Understanding the influence of AuNPs on lipid membranes is important to assure their safety in the biological environment and to improve their scope in nanomedicine. In this regard, the present study aims to analyze the effects of different concentrations (0.5, 1, and 2 w %) of dodecanethiol functionalized hydrophobic AuNPs on the structure and fluidity of zwitterionic 1-stearoyl-2-oleoyl-sn-glycerol-3-phosphocholine (SOPC) lipid bilayer membranes using Fourier transform infrared (FTIR) spectroscopy and fluorescent spectroscopy. The size of AuNPs was found to be 2.2 ± 1.1 nm using transmission electron microscopy. FTIR results have shown that the AuNPs induced a slight shift in methylene stretching bands, while the band positions of carbonyl and phosphate group stretching were unaffected. Temperature-dependent fluorescent anisotropy measurements have shown that the incorporation of AuNPs up to 2 w % did not affect the lipid order in membranes. Overall, these results indicate that the hydrophobic AuNPs in the studied concentration did not cause any significant alterations in the structure and membrane fluidity, which suggests the suitability of these particles to form liposome-AuNP hybrids for diverse biomedical applications including drug delivery and therapy.

Liquid biopsy has been developed to diagnose and monitor cancer. Despite the recent advances in investigating early cancer detection and diagnosis strategies, there is still a lack of improvements in capturing (CTCs). To archive this, we developed an efficient CTC detection system by integrating gold nanoparticles and a microfluidic platform, which can achieve CTC capture within 120 min. The microdevice was functionalized by immobilizing antibodies specific to the target cells. The method was tested with spiked tumor cells in whole human blood with three pancreatic cancer cell lines and compared with purified cancer cells suspended in a phosphate buffer solution. Our results captured pancreatic cancer cells spiked in blood samples with efficiency (90±3.2)% and were used to isolate CTCs from patients with metastatic pancreatic cancer. This methodology will enable the production of functionalized, patterned surfaces that interact with tumor cells, enhancing the selective capture of CTCs from biological assays.

Bangladesh is recently prosecuting and punishing the perpetrators of crimes against humanity and genocide committed in the Liberation War of 1971 via a domestically operated International Crimes Tribunal Bangladesh (‘ICTB’). Though the Tribunal is preceded under the municipal law, it's material jurisdiction, i.e., crimes against humanity and genocide are originated from international criminal law. Therefore, this study purposes to examine several legal obligations of the ICTB in defining crimes against humanity and genocide as the core international crimes. Firstly, I scrutinize what is the legal status of international law (treaty and customary law) in Bangladesh's legal system? Secondly, by applying international criminal law standards, I focus on that is it one of the obligations of Bangladesh to apply international criminal law definitions of genocide under the treaty obligation as the contracting parties to Genocide Convention 1948, and the ICC Statute 1998? Thirdly, I also discuss whether Bangladesh has any obligation to apply customary international law definitions of crimes against humanity because crimes against humanity are considered as jus cogens offense in general international law, from which no derogation is permitted. Lastly, after a critical evaluation of domestic and international criminal law instruments, I conclude that Bangladesh certainly failed to fulfill its legal obligation to define international crimes under a treaty and customary laws, which is one of the fatal errors of the ICTB, a government-sponsored criminal tribunal, to secure criminal justice to the accused.

Abstract: Our goal is to create point-of-care (POC) strategies that accelerate decision making, increase efficiency, improve outcomes, and enhance standards of care in island communities faced with global warming, rising oceans, population migration, and intensifying weather disasters. We assessed needs in the Bantayan Archipelago and mainland Cebu Province, Visayas Islands, Philippines, to map POC diagnostics, rescue times, and spatial care paths. Significant deficiencies were lack of cardiac troponin testing for rapid diagnosis of acute myocardial infarction, absence of blood gas and pH testing for support of critically ill patients, and geographic gaps prolonging patient transfers and delaying treatment. Strengths comprised primary care that can be facilitated by POC testing, logical inter-island transfers for which decision making and triage could be accelerated with onboard diagnostic testing, and healthcare small-world networks amenable to POC advances, such as pre-hospital testing, that avoid overloading emergency rooms. Healthcare resources must be distributed to archipelago islands, not concentrated in large metropolitan areas inaccessible for emergency interventions. We conclude that a point-of-need focus will help improve public health, decrease disparities in mortality among rural islanders versus urban dwellers, and pave the way for heightened resilience in anticipation of the adverse impact of global warming on vulnerable coastal areas.

With the development of general anesthesia techniques and anesthetic substances, brought new horizons for the expansion and improvement of surgical techniques. Nevertheless, more complex surgical procedures brought a higher complexity and longer duration for general anesthesia that led to a series of adverse events such as hemodynamic instability, under- or overdosage of anesthetic drugs, as well as an increased number of post-anesthetic events. In order to adapt the anesthesia according to the particularities of each patient, the multimodal monitoring of these patients is highly recommended. Classically, general anesthesia monitoring consists of the analysis of vital functions and gas exchange. Multimodal monitoring refers to the concomitant monitoring of the degree of hypnosis and the nociceptive-antinociceptive balance. By titrating anesthetic drugs according to these parameters, clinical benefits can be obtained, such as hemodynamic stabilization, reduction of awakening times, and the reduction of post-operative complications. Another important aspect is the impact on the status of inflammation and the redox balance. By minimizing inflammatory and oxidative impact one can achieve a faster recovery that will lead to both increased patient satisfaction and an increase in patient safety. The purpose of this literature review is to present the most modern multimodal monitoring techniques, respectively to discuss the particularities of each technique.

In the present study the synthesis of gold nanoparticles (AuNPs) loaded with methotrexate (MTX) has been carried out in order to obtain controlled size and monodispersed nanocarriers, around 20nm. Characterization study shows metallic AuNPs with MTX polydispersed on the surface. MTX is linked by a replacement of citrate by the MTX carboxyl group. The drug release profiles showed faster MTX release when it is conjugated, which leads to the best control of plasma concentration. Also, the enhanced release observed at pH 5 could take advantage of the pH gradients that exist in tumor microenvironments to achieve high local drug concentrations. AuNPs-MTX conjugates were tested by flow cytometry against lung (A-549) and colon (HTC-116) cancer cell lines. Results for A-549 showed a lighter dose-response effect than for colon cancer ones. This could be related to the presence of folate receptors in line HTC-116 on the contrary than line A-549, supporting the specific uptake of folate-conjugated AuNPs-MTX by folate receptor positive tumor cells. Conjugates exhibited considerably higher cytotoxic effects compared with the effects of equal doses of free MTX. Anexin V-PI test sustain as cell death mechanism apoptosis, which is normally disabled in cancer cells.

We propose an experimental method for the unidirectional excitation of spin waves. By structuring Au nanowires arrays within a coplanar waveguide onto a thin yttrium iron garnet (YIG) film, we observe a chiral coupling between the excitation field geometry of the nanowires grating and several well-resolved propagating magnon modes. We report a propagating spin wave spectroscopy study with unprecedented spectral definition, wavelengths down to 130 nm and attenuation lengths well above the 100 μm over the 20 GHz frequency band. The proposed experiment paves the way for future non-reciprocal magnonic devices.

Due to their well-defined plasmonic properties, gold nanorods (GNRs) can be fabricated with optimal light absorption in the near-infrared region of the electromagnetic spectrum, which make them suitable for cancer-related theranostic applications. However, their controversial safety profile, as a result of surfactant stabilization during synthesis, limits their clinical translation. We report a facile method to improve GNR biocompatibility through the presence of sodium dodecyl sulfate (SDS). GNRs (120 x 40 nm) were synthesized through a seed-mediated approach, using cetyltrimethylammonium bromide (CTAB) as a cationic surfactant to direct the growth of nanorods and stabilize the particles. Post-synthesis, SDS was used as an exchange ligand to modify the net surface charge of the particles from positive to negative while maintaining rod stability in an aqueous environment. GNR cytotoxic effects, as well as the mechanisms of their cellular uptake, were examined in two different cancer cell lines, Lewis lung carcinoma (LLC) and HeLa cells. We not only found a significant dose-dependent effect of GNR treatment on cell viability but also a time-dependent effect of GNR surfactant charge on cytotoxicity over the two cell lines. Our results promote a better understanding of how we can mediate the undesired consequences of GNR synthesis byproducts when exposed to a living organism, which so far has limited GNR use in cancer theranostics.

Giant plasmonic surface enhancement has been observed in gold coated micron sized inverse pyramids entrapping a gold nanoparticle. The amplification of both surface enhanced Raman and photoluminescence signals was found to be dependent on the diameter of trapped gold nanoparticle and around 50-fold enhancement was detected for 250nm diameter sample relatively to the 50nm one. Finite differential time domain simulations, performed to determine the near-field distribution in the structure, showed that when the nanoparticle protrudes into the hotspot zone of the void, coupling of electromagnetic field occurs and the plasmon-related near-field enhancement is concentrated into the close vicinity of the nanoparticle, mainly into the close gaps around the tangential points of the curved sphere and the flat pyramid surface. This results in a more than 15 times increase of the near-field intensity, compared to the empty void.

Plasmonic gold nanorods play important roles in nowadays state-of-the-art plasmonic sensing techniques. Most of the previous studies and applications focused on gold nanorods with relatively small aspect ratios, where the plasmon wavelengths are smaller than 900 nm. Gold nanorods with large aspect ratios are predicted to exhibit high refractive-index sensitivity (Langmir 2008, 24, 5233–5237.), which therefore should be promising for developing of high-performance plasmonic chemical- and bio-sensors. In this study, we developed gold nanorods with aspect ratios over 7.9, which exhibit plasmon resonances around 1064 nm. The refractive index (RI) sensitivity of these nanorods have been evaluated by varying their dielectric environment, whereby a sensitivity as high as 473 nm/RIU can be obtained. Furthermore, we have demonstrated the large-aspect-ratio nanorods as efficient substrate for surface enhanced Raman spectroscopy (SERS), where an enhancement factor (EF) as high as 9.47×10⁸ was measured using 4-methylbenzenethiol (4-MBT) as probe molecule. Finally, a type of flexible SERS substrate is developed by conjugating the gold nanorods with the polystyrene (PS) polymer. The results obtained in our study can benefit the development of plasmonic sensing techniques utilized in the near-infrared spectral region.

The origin of SARS-CoV-2 is debated, even after 18 months into the COVID-19 pandemic and a special investigation conducted by the World Health Organization. The RaTG13 sequence has been a highlight of discussions surrounding the origin of SARS-CoV-2. Here we express our opinion about the need for better reporting standards for information about sequencing data, especially for pathogens, citing our findings with the reported RaTG13 genome.