Interval-valued functions have been widely used to accommodate data inexactness in optimization and decision theory. In this paper, we study interval-valued vector optimization problems, and derive their relationships to interval variational inequality problems, of both Stampacchia and Minty types. Using the concept of interval approximate convexity, we establish necessary and sufficient optimality conditions for local strong quasi and approximate $LU$-efficient solutions to nonsmooth optimization problems with interval-valued multiobjective functions.

In this paper, our goal is to establish the relationship between solutions of local sharp vector variational type inequality and sharp efficient solutions of vector optimization problems, also Minty local sharp vector variational type inequality and sharp efficient solutions of vector optimization problems, under generalized approximate $\eta$-convexity conditions for locally Lipschitzian functions

Quantitative and qualitative fuzzy measures have been proposed to hesitant fuzzy sets (HFSs) from different points. However, few of the existing HFSs fuzzy measures refer to the grey relational analysis (GRA) theory. Actually, the GRA theory is very useful in the fuzzy measure domain, which has been developed for such the intuitionistic fuzzy sets. Therefore, in this paper, we apply the GRA theory to the HFSs and interval-valued hesitant fuzzy sets (IVHFS) domain. We propose the HFSs grey relational degree, HFSs slope grey relational degree, HFSs synthetic grey relational degree and IVHFSs grey relational degree, which describe the closeness, the variation tendency and both the closeness and variation tendency of HFSs and closeness of IVHFSs, respectively, greatly enriching the fuzzy measures of HFSs. Furthermore, with the help of the TOPSIS method, we develop the grey relational based MADM methodology to solve the HFSs and IVHFSs MADM problems. Finally, combined with two practical MADM examples about energy policy selection with HFSs information and emergency management evaluation with IVHFSs information, we obtain the most desirable decision results, and compared with the previous methods, the validity, effectiveness and accuracy of the proposed grey relational degree for HFSs and IVHFSs are demonstrated in detail.

In this study, we investigated the features of co-infection with SARS-CoV-2 and nonpathogenic strain LEV8 of coxsackievirus A7 or enterovirus A71 for Vero E6 cells and Syrian hamsters. The investigation of co-infection with SARS-СoV-2 and LEV-8 or EV-A71 in the cell model was shown that a competitive inhibitory effect for these viruses were especially significant against SARS-CoV-2. Pre-infection with enteroviruses in animals caused more than a 100-fold decrease in the levels of SARS-CoV-2 virus replication in the respiratory tracts and more rapid clearance of the lower respiratory tract from infectious SARS-CoV-2. Co-infection with SARS-CoV-2 and LEV-8 or EV-A71 also reduced the severity of clinical manifestations of the SARS-CoV-2 infection for animals. Additionally, the histological data illustrated that co-infection with nonpathogenic coxsackievirus decreased the level of pathological changes by SARS-CoV-2 in the lungs. Research into the chemokine/cytokine profile demonstrated that the studied enteroviruses efficiently triggered this part of antiviral immune response, which can be associated with significant inhibition of SARS-CoV-2 infection. These results demonstrate that there exists a strong viral interference between the studied nonpathogenic strain of coxsackievirus A7 or enteroviruses A71 and SARS-CoV-2 pathogenic for humans in vitro and in vivo.

Keywords: pelvic ultrasound, follicle number per ovary, FNPO, ovarian volume, PCOM, upper normal limits, referral population

In this paper, we shall introduce the interval-valued spatial error model. Based on the idea of least square method of single-valued case, we give the parameter estimator for interval-valued spatial error model. The theoretical properties of the proposed estimator are proved. Finally, we give the numerical analysis and a real example.

In this article, we show the existence of fixed point for the derivative of interval-valued functions. Meanwhile, the fixed point inquiry will utilize the common fixed point methods under the condition of compatibility of the hybrid composite mappings in the sense of the Hausdorff metric. Some examples are given to support the usability of the result of this research .

In this study, we present the concept of interval-valued fuzzy soft point and then introduce the notions of neighborhood and quasi-neighbourhood of it in interval-valued fuzzy soft topological spaces. Separation axioms in interval-valued fuzzy soft topology, so-called $q$-$T_{i}$ for $ i=0,1,2,3,4 ,$ is introduced and some of its basic properties are also studied.

This article introduces a novel nature-inspired metaheuristic algorithm called Frilled Lizard Optimization (FLO), which emulates the hunting behavior of frilled lizards in their natural habitat. FLO draws in-spiration from the sit-and-wait strategy observed in frilled lizards during hunting. The underlying theory of FLO is presented and mathematically formulated in two phases: (i) an exploration phase, simulating the frilled lizard's attack towards prey, and (ii) an exploitation phase, simulating the lizard's retreat to the top of the tree after feeding. To assess FLO's efficacy in solving optimization problems, the algorithm's performance is evaluated across fifty-two standard benchmark functions, encompassing unimodal, high-dimensional multimodal, fixed-dimensional multimodal, and the CEC 2017 test suite. Comparative analyses with twelve existing metaheuristic algorithms are conducted. The simulation results reveal that FLO, distinguished by its adeptness in exploration, exploitation, and balancing them during search process, outperforms competing algorithms. Additionally, FLO is implemented on twenty-two constrained optimization problems from the CEC 2011 test suite and four engineering design problems, demonstrating its effectiveness in addressing real-world optimization applications.

The aim of this paper is to obtain Karush-Kuhn-Tucker optimality conditions for weakly efficient solutions to vector equilibrium problems with the addition of constraints in the novel context of Hadamard manifolds as opposed to the classical examples of Banach, normed or Hausdorff spaces. More specifically, classical necessary and sufficient conditions for weakly efficient solutions to the constrained vector optimization problem are presented. As well as some examples. The results presented in this paper generalize results obtained by Gong (2008) and Wei and Gong (2010) and Feng and Qiu (2014) from Hausdorff topological vector spaces, real normed spaces and real Banach spaces to Hadamard manifolds, respectively.

In this paper, we prove that the sub convexlikeness introduced by V. Jeyakumar [1], and the subconvexlikeness defined in V. Jeyakumar [2] are equivalent in loccallly convex topological spaces. And then, we work with set-valued vector optimization problems and obtain some vector saddle-point theorems and vector Lagrangian theorems.

In this paper, we generalize the problems of finding simple polygons with the minimum area, maximum perimeter and maximum number of vertices so that they contain a given set of points and their angles are bounded by $\alpha+\pi$ where $\alpha$ ($0\leq\alpha\leq \pi$) is a parameter. We also consider the maximum angle of each possible simple polygon crossing a given set of points, and derive an upper bound for the minimum of these angles. The correspondence between the problems of finding simple polygons with the minimum area and maximum number of vertices is investigated from a theoretical perspective. We formulate the three generalized problems as nonlinear programming models, and then present a Genetic Algorithm to solve them. Finally, the computed solutions are evaluated on several datasets and the results are compared with those from the optimal approach.

The canonical decomposition of a bipartite graph is a new decompositionmethod that involves three operators, parallel, series and K+S. The class of weak bisblit graphs is totally decomposable with respect of these operators, and the class of bicographs is totally decomposable with respect of parallel and series operators. We prove in this paper that the class of bipartite (P_6,C_6)-free graphs is exactly the class of bipartite graphs that are totally decomposable with respect of parallel and K+S operators. We simplify the recognition algorithm of weak-bisplit graphs to adepte with bipartite (P_6,C_6)-free graphs. As a result of this adapted algorithm, we prsent efficient solutions in this class of graphs for two optimization graph problems, the first is the maximm balanced bi-clique problem and the the second is the maximum independent set problem.

. In this paper, we introduce a series of definitions of generalized affine functions for vector-valued functions. We prove that our generalized affine functions have some similar properties with generalized convex functions. We present examples to show that our generalized affinenesses are different from one another, and also provide an example to show that our definition of presubaffinelikeness is non-trivial; presubaffinelikeness is the weakest generalized affineness introduced in this article. We work with optimization problems that are defined and taking values in linear topological spaces. We devote to the study of constraint qualifications, and derive some optimality conditions as well as a strong duality theorem. Our optimization problems have inequality constraints, equality constrains and abstract constraints; our inequality constraints are generalized convex functions and equality constraints are generalized affine functions.

In the era of sustainable development, green supplier selection has become a key component of supply chain management, as it considers criteria such as carbon footprint, water usage, energy usage and recycling capacity. Since the green supplier selection problem involves subjective criteria and uncertainty in preferences, it is well suited to using multi-criteria decision-making methods (MCDM). Although few researchers have investigated MCDM for green supplier selection under uncertainty using intuitionistic and Pythagorean fuzzy sets. Still, the newly developed fermatean fuzzy can handle greater data uncertainty than intuitionistic and Pythagorean fuzzy sets. Since interval extension of fuzzy theory provides more accurate modeling, in this paper, we propose an interval extension of fermatean fuzzy set and discuss its fundamental set operations, arithmetic operations and related properties. We propose the Hamming distance function and the score function of the interval-valued fermatean fuzzy numbers. The recently developed Multi-attribute Border Approximation Area Comparison (MABAC) method is also considered due to its stable and simple computation compared to other conventional MCDM methods. Therefore, an interval-valued fermatean fuzzy MABAC method is proposed and solved to select a green supplier based on multiple criteria. The proposed method's comparative analysis and sensitivity analysis validate the proposed method's effectiveness and robustness.

In this essay, the new notion concerning longest path is introduced. Longest path has a close relation with the notion of diameter in graph. The classes of graph are studied in the terms of having the vertex with longest path. Valued number is the number of edges belong to the longest path in the matter of vertex. For every vertex, there’s a valued number and new notion of valued set is the generalization of valued number for the vertex when all vertices of the graphs are corresponded to a vertex which has the greater valued number. For any positive integer, there’s one graph in that, there’s vertex which its valued number is that. By deleting the vertices which don’t belong to valued set, new notion of new graph is up. It’s called valued graph. The comparison amid valued graph and initial graph is up, too.

Real-world optimization problems are often gov- erned by one or more constraints. Over the last few decades, extensive research has been performed in Constrained Opti- mization Problems (COPs) fueled by advances in computational power. In particular, Evolutionary Algorithms (EAs) are a preferred tool for practitioners for solving these COPs within practicable time limits. We propose a novel hybrid Evolutionary Algorithm based on the Differential Evolution algorithm and Adaptive Parameter Gaining Sharing Knowledge-based algo- rithm to solve global real-world constrained parameter space. The proposed CHAGSKODE algorithm leverages the power of multiple adaptation strategies concerning the control parameters, search mechanisms, as well as uses knowledge sharing between junior and senior phases. We test our method on the benchmark functions taken from the CEC2020 special session & competition on real-world constrained optimization. Experimental results indicate that CHAGSKODE is able to achieve state-of-the- art performance on real-world constrained global optimization when compared against other well-known real-world constrained optimizers.

Many combinatorial optimization problems are hard to solve within the polynomial computational time or NP-hard problems. Therefore, developing new optimization techniques or improving existing ones still grab attention. This paper presents an improved variant of the Ant Colony Optimization meta-heuristic called Enhanced Hyper Cube Framework ACO (EHCFACO). This variant has an enhanced exploitation feature that works through two added local search movements of insertion and bit flip. In order to examine the performance of the improved meta-heuristic, a well-known structural optimization problem of laminate Stacking Sequence Design (SSD) for maximizing critical buckling load has been used. Furthermore, five different ACO variants were concisely presented and implemented to solve the same optimization problem. The performance assessment results reveal that EHCFACO outperforms the other ACO variants and produces a cost-effective solution with considerable quality.

Recently, the Hypervolume Newton method (HVN) has been proposed as fast and precise indicator-based method for solving unconstrained bi-objective optimization problems with objective functions that are at least twice continuously differentiable. The HVN is defined on the space of (vectorized) fixed cardinality sets of decision space vectors for a given multi-objective optimization problem (MOP) and seeks to maximize the hypervolume indicator adopting the Newton-Raphson method for deterministic numerical optimization. To extend its scope to non-convex optimization problems the HVN method was hybridized with a multi-objective evolutionary algorithm (MOEA), which resulted in a competitive solver for continuous unconstrained bi-objective optimization problems. In this paper, we extend the HVN to constrained MOPs with in principle any number of objectives. We demonstrate the applicability of the extended HVN on a set of challenging benchmark problems and show that the new method can be readily be applied to solve equality constraints with a high precision problems, and to some extend also inequalities. We finally use HVN as local search engine within a MOEA and show the benefit of this hybrid method on several benchmark problems.

The systematic sampling is used as a method to get the quantitative results from the tissues and the radiological images. Systematic sampling on real line (R) is a very attractive method within which the biomedical imaging is consulted by the practitioners. For the systematic sampling on R, the measurement function (MF) is occurred by slicing the three-dimensional object equidistant systematically. The currently used covariogram model in variance approximation proposed by [28,29] is tested for the different measurement functions in a class to see the performance on the variance estimation of systematically sampled R. This study is an extension of [17], and an exact calculation method is proposed to calculate the constant λ(q,N) of confidence interval in the systematic sampling. The exact value of constant λ(q,N) is examined for the different measurement functions as well. As a result, it is observed from the simulation that the proposed MF should be used to check the performances of the variance approximation and the constant λ(q,N). Synthetic data can support the results of real data.

Due to the high computational burden and the high nonlinearity of the responses, crashworthiness optimizations are notoriously hard-to-solve challenges. Among various approaches, methods like the Successive Response Surface Method (SRSM) have stood out for their efficiency in enhancing baseline designs within a few iterations. However, these methods have limitations that restrict their application. Their minimum iterative resampling required is often computationally prohibitive. Furthermore, surrogate models are conventionally constructed using Polynomial Response Surface (PRS), a method that is poorly versatile, prone to overfitting, and incapable of quantifying uncertainty. Furthermore, the lack of continuity between successive response surfaces results in suboptimal predictions. This paper introduces the Multi-Fidelity Successive Response Surface (MF-SRS), a Gaussian process-based method, which leverages a nonlinear multi-fidelity approach for more accurate and efficient predictions compared to SRSM. After initial testing on synthetic problems, this method is applied to a real-world crashworthiness task: optimizing a bumper crossmember and crash box system. Results, benchmarked against SRSM and the Gaussian Process Successive Response Surface (GP-SRS) – a single-fidelity Gaussian process-driven extension of SRSM, show that MF-SRS offers distinct advantages. Specifically, it improves upon the specific energy absorbed optimum value achieved by SRSM by 14.1 %, revealing its potential for future applications.

Theoretical studies on the generation of nondiffracting and nondispersive light pulses and their experimental implementation are one of the renowned problems within electromagnetics. Current technologies enable creation of short-duration pulses of a few cycles with high power and fluency. An application of these techniques to the field of nondiffracting and nondispersive pulses requires a proper mathematical description of highly focused vector pulses. In this work, we study vector optical bullets in a dielectric medium with different polarization structures: linear, azimuthal, and radial. We report the differences caused by the vector model compared to the scalar model. We analyze effects caused by superluminal, subluminal, or even negative group velocity on properties of vector optical bullets inside a dielectric material.

The aim of this article is to introduce the new notion on a given graph. The notions of valued set, valued function, valued graph and valued quotient are introduced. The attributes of these new notions are studied. Valued set is about the set of vertices which have the maximum number of neighbors. The kind of partition of the vertex set to the vertices of the valued set is introduced and its attributes are studied. The behaviors of classes of graphs under these new notions are studied and the algebraic operations on these sets in the different situations get new result to understand the classes of graphs, these notions and the general graphs better and more.

Real-world optimization problems are often governed by one or more constraints. Over the last few decades, extensive research has been performed in Constrained Optimization Problems (COPs) fueled by advances in computational intelligence. In particular, Evolutionary Algorithms (EAs) are a preferred tool for practitioners for solving these COPs within practicable time limits. We propose an ensemble of multi- method hybrid EA framework with four mutation operators, two crossover operators, multi-search [Differential Evolution (DE) & Gaining Sharing Knowledge (GSK)] optimization algorithm, and ensemble of constraint handling techniques to solve global real- world constrained optimization problem. The proposed frame- work FEPEA has an ascendancy of multiple adaptation strategies concerning the control parameters, search mechanisms, two sub-populations as well as uses knowledge sharing mechanism between junior and senior phases. The algorithm also combines the power of four popular constraint handling techniques (CHT) and uses a voting mechanism to select any particular CHT. On top of that, this algorithm also uses both linear and non- linear population size reduction in every step of the evolutionary process. We test our method on 57 real-world problems provided as part of the CEC 2020 special session & competition on real- world constrained optimization benchmark suite. Experimental results indicate that FEPEA is able to achieve state-of-the- art performance on real-world constrained global optimization when compared against other well-known real-world constrained optimizers.

Continuous Distributed Constraint Optimization Problem (C-DCOPs) are a powerful framework to model problems with continuous variables in multi-agent systems. Previous works about C-DCOP algorithms mainly use pseudo-trees to guarantee the anytime property or are without anytime property guarantees. However, there is a risk of privacy leakage in the pseudo-tree due to utility passing between agents. Therefore, based on the basic constraint graph instead of the pseudo-tree, we (i) extend the Maximum Gain Message (MGM) algorithm by combining the local search strategy to solve C-DCOPs, named Continuous MGM (C-MGM), and it’s able to guarantee the monotonicity of the solution quality; (ii) propose a Parallel C-MGM (C-PMGM) algorithm to improve the solution quality through parallel random search; and (iii) introduce the differential search into C-PMGM to design a Parallel Differential Search C-MGM (C-PDSM) algorithm, which constructs a heuristic method to speed up convergence and improve solution quality. Compared to other anytime C-DCOP algorithms using pseudo-trees, the proposed three algorithms can exhibit better performance in avoiding privacy violations. We theoretically prove that the proposed algorithms are the anytime algorithms and empirically demonstrate that our algorithms outperform the state-of-the-art C-DCOP algorithms.

We have introduced a sign operator of energy, analogous to the operator helicity, but in the direction of what we call energy vector. However, this energy vector needs a time vector. To give physical senses to the components of such a time vector, we try to explain the time dilation in special relativity and try to relate the components of the time vector to the tunneling times when an electron crosses a potential barrier.

It is known that the class of p-normed spaces (0 < p ≤ 1) is an important generalization of usual normed spaces with rich topological and geometrical structure, but the most of tools and general principles in nature with nonlinearity have not been developed yet, thus the main goal of this paper is to develop tools for nonlinear analysis under the framework of p-vector spaces. In particular, we first develop the general fixed point theorems which provide solutions to answer Schauder conjecture since 1930’s in the affirmative for p-vector spaces when p = 1 (which is just general topological vector spaces); then the one best approximation result for upper semi-continuous mappings is given, which is used as a powerful tool to establish fixed points for non-self set-valued mappings with either inward or outward set conditions; and finally we establish comprehensive existence results of solutions for Birkhoff-Kellogg Problems, and the general principle of nonlinear alternative by including Leray-Schauder alternative and related results. The results given in this paper not only include the corresponding results in the existing literature as special cases, but also expected to be useful tools for the study of nonlinear problems arising from theory to practice.

To make wind power more competitive, it is necessary to reduce turbine downtime and reduce costs associated with wind turbine Operation and Maintenance (O&amp;M). Incorporating machine learning in developing condition-based predictive maintenance methodologies for wind turbines can enhance their efficiency and reliability. This paper presents a monitoring method that utilizes Base Density for the Support Vector Machine (BDSVM) and the evolutionary Fourier spectra of vibrations. This method allows smart monitoring of the function evolution of the turbine. A complex optimal function (FO) for 5-degree order has been developed that will be the boundary function of the BDSVM to timely determine the magnitude, frequency, and place of the failure occurring in wind turbine drive.

In this paper, a new approach to retrieve semantic images based on shape and geometric features of image in conjunction with multi-class support vector machine is proposed. Zernike moment as shape feature is to verify the invariance of objects for silhouette image. In addition, a set of geometrical features is to explore the objects shape using two features of rectangularity and circularity. Then the extracted features are normalized and employed for multi-class support vector machine either for learning or retrieving processes. The retrieving process relies on three main tasks which namely Query Engine, Matching Module and Ontology Manger, respectively. Query Engine is to build the input text or image query using SPARQL language. The matching module extracts the shape and geometric features of image’s objects and employ them to Ontology Manger which in turn inserts them in ontology knowledge base. Benchmark mammals have been conducted to empirically conclude the outcome of proposed approach. Our experiment on text and image retrieval yields efficient results to problematic phenomena than previously reported.

This paper presents a novel algorithm, the multi-objective nonlinear interval PageRank (MONIPR) Algorithm. This algorithm extends the conventional PageRank (PR) algorithm, integrating nonlinear interval computation and multi-objective considerations into the computation process. The MONIPR algorithm bridges a research gap in integrating nonlinear interval approaches and multi-objective problems into the PR algorithm, which were traditionally treated separately. In addition, this research adopts the constrained interval arithmetic proposed to address the limitations of the conventional PR algorithm, which tends to overlook uncertainties and results in deterministic outcomes. In addition, we use a numerical example to demonstrate the proposed algorithm, contrasting it with the conventional approaches. A numerical example demonstrates the algorithm's performance by comparing the rank intervals obtained with the traditional crisp Markov chain and PR algorithm. The results highlight the ability of the proposed algorithm to provide a range of possible rank intervals, considering both uncertainty and multi-objectives. The findings suggest potential applications in decision-making, uncertainty quantification, and systems analysis.

Named herein “CytroCell”, the cellulosic material obtained via hydrodynamic cavitation of citrus processing waste in water is cellulose of low crystallinity, high porosity, good water holding capacity and good dispersibility in water. These properties, here demonstrated for the first time for lemon and grapefruit CytroCell, open the route to mass scale production of a useful functional material from a cheap and abundant biowaste. The process, indeed, does not require any pre-treatment of the raw material, and does not use acid, alkali, chemical oxidants or enzymes.

Adequate knowledge about the development and operation of the components of water systems is of high importance in order to optimize them. For this reason, forecasting of future events becomes greatly significant due to making the appropriate decision. Moreover, operational river management severely depends on accurate and reliable flow forecasts. In this regard, current study inspects the accuracy of support vector regression (SVR), and SVR regulated with fruit fly optimization algorithm (FOASVR) and M5 model tree (M5), in river flow forecasting. Monthly data of river flow in two stations of the Lake Urmia Basin (Vaniar and Babarud stations on the Aji Chay and the Barandouz Rivers) were utilized in the current research. Additionally, the influence of periodicity (π) on the forecasting enactment was examined. To assess the performance of mentioned models, different statistical meters were implemented, including root mean squared error (RMSE), mean absolute error (MAE), correlation coefficient (R), and Bayesian information criterion (BIC). Results showed that the FOASVR with RMSE (4.36 and 6.33 m3/s), MAE (2.40 and 3.71 m3/s) and R (0.82 and 0.81) values had the best performances in forecasting river flows in Babarud and Vaniar stations, respectively. Also, regarding BIC parameters, Q_t-1 and π were selected as parsimonious inputs for predicting river flow one month ahead. Overall findings indicated that, although both FOASVR and M5 predicted the river flows in suitable accordance with observed river flows, the performance of FOASVR was moderately better than the M5 and periodicity noticeably increased the performances of the models; consequently, FOASVR can be suggested as the accurate method for forecasting river flows.

A time interval only description necessarily needs its own independent definitions, without one moment time coordinates to it. In this paper derived are time interval only set properties, including commutation relations, addition, multiplication and derivatives. Time interval only set commutation relations, consistent with one moment time set properties, are introduced by defining correspondence relations for these sets. Time development and equilibrium within the time interval description depend on the well-known ‘mean velocity theorem’ and the time interval version of the Legendre transform. In contrast, usually applied is only the traditional vector and one moment time coordinate kinematic approach from Newton’s laws. The main results of this paper are correspondences and time interval only set commutation relations. All other properties are derived from these results, while for the time interval only set, different from the one moment time set the canonical property is not valid. The time interval only description can be applied assuming spherical symmetric star-source radiation propagation, with finite time intervals for realistic measurement events. From time development with (a-)symmetry of time intervals, and from Curie’s principle, change can be described with a set theoretic approach. Time interval only set properties include the time interval only version of Noether charges and structure constants. A time interval only description for wave propagation, including group-velocity, for zero and non-zero mass wave particles, relates to the properties of the time interval only set. A second result in terms of the time interval only description is propagation wave energy equivalence with gravitation energy, derived from time interval only set commutation relations. A time interval approach, however including one moment time description dependence, was introduced in earlier publications of this author. In part 1 investigated are the time interval only set and its properties, a forthcoming part 2 to application of the time interval only description to specific groups of stars as emission sources.

In this paper, we prove the existence of three solutions for a $p$-Kirchhoff problem with $\psi$-Hilfer fractional derivative. To be more precise, we use the variational method and we prove that the associated functional energy admits a critical point in each of the three constructed sets, these critical points are weak solutions for a studied problem. Moreover, by definition of these sets, one of these solutions is positive, the second is negative, and the third one change sign. At the end of this work, we present an example to validate our main results.

In Germany, the phloem sucking planthopper Pentastiridius leporinus (Hemiptera: Cixiidae) currently represents the epidemiological driver for the spread of the syndrome “Basses Richesses” in sugar beet, which results in a reduced sugar content and an economic loss for the farmers. This disease is associated with the γ-proteobacterium ‘Candidatus Arsenophonus phytopathogenicus’ and the Stolbur phytoplasma ‘Candidatus Phytoplasma solani’. Recently, P. leporinus was found in potato fields in Germany associated with Stolbur-like symptoms in this crop. In this study, we confirmed that the vector completes its lifecycle on sugar beet as well as on potato when reared under controlled conditions. Transmission experiments with adults of this vector combined with molecular analyses showed for the first time that both pathogens are transmitted by this vector to potato. For an accurate assessment of the Ca. P. solani and Ca. A. phytopathogenicus titers in the vector and host plants, gBlocks derived from the hsp20- and 16S rRNA gene were employed, respectively. For Ca. P. solani the limit of detection was determined in potato and sugar beet material. The results of this study will further research on the epidemiology of the syndrome “Basses Richesses” and “Stolbur” diseases and the response of host plants and vector insects to both pathogens.

Sourced so far mostly from beet root juice, betanin is a red-violet natural colorant increasingly used by the food, beverage and nutraceutical industries. We provide an updated bioeconomy perspective into a valued betacyanin whose supply and applications, we argue in this study, will rapidly expand.

Quantum computing is an emerging field that have given a significant impact on optimization. Among the diverse quantum algorithm, the quantum gradient descent has become a prominent technique for solving unconstrained optimization problems. In this paper, we propose a quantum-spectral Polak-Ribi{\'e}re-Polyak (PRP) conjugate gradient approach. The technique is considered as a generalization of the spectral PRP method which employs a $q$-gradient that approximate the classical gradient with quadratically better dependence on the quantum variable $q$. Additionally, the proposed method reduces to the classical variant as quantum variable $q$ gets closer to $1$. The quantum search direction always satisfies the sufficient descent condition and does not depend on any line search. This approach is globally convergent with the standard Wolfe line search without any convexity assumption. Numerical experiments are conducted and compared with the existing approach to demonstrate the improvement of the proposed strategy.

Probabilistic inference problems have very broad practical applications. To solve this kind of problems under conditions of certainty, an effective mathematical apparatus has been developed. In real situations, obtaining deterministic estimates of relevant probabilities is often difficult; therefore, problems with handling uncertain estimates of probabilities appear. This paper examines the problem of probabilistic inference with probability trees provided that the initial probabilities are given in the form of intervals of their possible values.

Accurate forecasting of icing thickness has a great significance for ensuring the security and stability of power grid. In order to improve the forecasting accuracy, this paper proposes an icing forecasting system based on fireworks algorithm and weighted least square support vector machine (W-LSSVM). The method of fireworks algorithm is employed to select the proper input features with the purpose of eliminating the redundant influence. In addition, the aim of W-LSSVM model is to train and test the historical data-set with the selected features. The capability of this proposed icing forecasting model and framework is tested through the simulation experiments using real-world icing data from monitoring center of key laboratory of anti-ice disaster, Hunan, South China. The results show that the proposed W-LSSVM-FA method has a higher prediction accuracy and it may be a promising alternative for icing thickness forecasting.

Proteomics research has become one of the most important topics in the fields of life science and natural science. At present, research on protein–protein interaction networks (PPINs) mainly focuses on detecting protein complexes or function modules. However, existing approaches are either ineffective or incomplete. In this paper, we investigate function module detection mechanisms in PPIN, including open databases, existing detection algorithms and recent solutions. After that, we describe the proposed solution based on simplified swarm optimization (SSO) algorithm and gene ontology knowledge. The proposed solution implements SSO algorithm for clustering proteins with similar function, and imports biological gene ontology knowledge for further identifying function complexes and improving detection accuracy. Furthermore, we use four different categories of species dataset for experiment: Fruitfly, Mouse, Scere, and Human. The testing and analysis result show that the proposed solution is feasible, efficient and could achieve a higher accuracy of prediction than existing approaches.

From new understanding of pectin molecular structure and physiological effects on man up to new production methods and new applications, significant new knowledge of pectin has emerged in the last two decades (2010-2020). These developments open the route to new and unexpected applications of this uniquely complex heteropolysaccharide ubiquitous in plants and fruits well beyond its traditional use as food hydrocolloid. This study provides a unified perspective on the new science and technology of pectin. Furthermore, we offer an insight into forthcoming pectin uses from an expanded perspective taking into account selected technology and economic factors that, we argue in this study, will shortly impact the pectin production and uptake in many countries.

In this paper, we consider a class of bilevel programming problems (abbreviated as, BLPP). Exploiting the generalized approximate convexity assumptions, we investigate the relations among the solutions of approximate Minty (respectively, Stampacchia) type variational inequalities (abbreviated as, AMTVI (respectively, ASTVI)), and the local ϵ-quasi solutions of the BLPP. Moreover, by employing the generalized Knaster–Kuratowski–Mazurkiewicz (abbreviated as, KKM)-Fan’s lemma, we derive some existence results for the solutions of approximate variational inequalities (abbreviated as, AVI), namely, AMTVI and ASTVI. A non-trivial example is given to highlight the importance of the established results. To the best of our knowledge, there is no research paper available in the literature that establishes relationships between the AVI and the BLPP under the assumptions of generalized approximate convexity in terms of limiting subdifferentials.

The expansion of renewable energies is progressing strongly. The influence on the power supply networks by the volatility of the infeed must be met with new concepts. In this paper we investigate the possibilities of integrating microgrids as a cooperating unit in the power supply network to support further expansion of RES power plants. In this paper a differentiation of microgrids from similar network structures is established, a classification of proposed groups is made. Then, after the description of simulation of components in a microgrid, with practical advice, an example model is shown, which aids the dimensioning of the components within a microgrid to achieve a specified goal.

Remaining service life (RSL) of pavement, as a sign of future pavement performance, has always received growing attention from pavement engineers. The RSL describes the time from the moment of pavement inspection until such a time when a major repair or reconstruction is required. The conventional approach to determining RSL involves using non-destructive tests. These tests, in addition to being costly, interfere with traffic flow and compromise users' safety. In this paper, surface distresses of pavement have been used to estimate the pavement’s RSL in order to eliminate the aforementioned problems and challenges. To implement the proposed theory, 105 flexible pavement segments were taken from Shahrood-Damghan Highway (Highway 44) in Iran. For each pavement segment, the type, severity, and extent of surface damage and pavement condition index (PCI) were determined. The pavement RSL was then estimated using non-destructive tests include Falling Weight Deflectometer (FWD) and Ground Penetrating Radar (GPR). After completing the dataset, the modeling was conducted to predict RSL using three techniques include Support Vector Regression (SVR), Support Vector Regression Optimized by Fruit Fly Optimization Algorithm (SVR-FOA), and Gene Expression Programming (GEP). All three techniques estimated the RSL of the pavement by selecting the PCI as input. The Correlation Coefficient (CC), Nash-Sutcliffe efficiency (NSE), Scattered Index (SI), and Willmott’s Index of agreement (WI) criteria were used to examine the performance of the three techniques adopted in this study. In the end, it was found that GEP with values of 0.874, 0.598, 0.601, and 0.807 for CC, SI, NSE, and WI criteria, respectively, had the highest accuracy in predicting the RSL of pavement.

There exist numerous high-dimensional problems in the real world which cannot be solved through the common traditional methods. The metaheuristic algorithms have been developed as successful techniques for solving a variety of complex and difficult optimization problems. Notwithstanding their advantages, these algorithms may turn out to have weak points such as lower population diversity and lower convergence rate when facing complex high-dimensional problems. An appropriate approach to solve such problems is to apply multi-agent systems along with the metaheuristic algorithms. The present paper proposes a new approach based on the multi-agent systems and the concept of agent, which is named Multi-Agent Metaheuristic (MAMH) method. In the proposed approach, several basic and powerful metaheuristic algorithms, including Genetic Algorithm (GA), Particle Swarm Optimization (PSO), Artificial Bee Colony (ABC), Firefly Algorithm (FA), Bat Algorithm (BA), Flower Pollination Algorithm (FPA), Gray Wolf Optimizer (GWO), Whale Optimization Algorithm (WOA), Crow Search Algorithm (CSA), Farmland Fertility Algorithm (FFA), are considered as separate agents each of which sought to achieve its own goals while competing and cooperating with others to achieve the common goals. In overall, the proposed method was tested on 32 complex benchmark functions, the results of which indicated effectiveness and powerfulness of the proposed method for solving the high-dimensional optimization problems. In addition, in this paper, the binary version of the proposed approach, called Binary MAMH (BMAMH), was executed on the spam email dataset. According to the results, the proposed method exhibited a higher precision in detection of the spam emails compared to other metaheuristic algorithms and methods.

The blood counts of α thalassemia carriers (α-thal) are similar to those of β thalassemia carriers, except for Hgb A2 that is not elevated. The objective of this study was to determine whether mathematical formulas are effective for detecting suspected α-thal. The data were obtained from the database of the prevention program for detecting couples at risk for having a child with hemoglobinopathy. RBC indices were analyzed using mathematical formulas and the sensitivity and negative predictive value (NPV) calculated. Among 1334 blood counts suspected α-thal analyzed, only the Shine&Lal and the Support Vector Machine formulas revealed high sensitivity and NPV. Sensitivity was 85.54 and 99.33% and NPV 98.93 and 99.93%, respectively. Molecular defects were found in 291, 81 had normal α genes. Molecular analysis was not performed in 962. Based on these results, mathematical formulas incorporating one of these reliable formulas for detecting suspected α or β thalassemia carriers in the program of the automatic analyzers can flag these results and increase the awareness of the primary physicians about the carrier risk and send an alert with a recommendation for further testing.

In the process of oil and gas development and production, when the flow rate in the wellbore is large, the materials underground will be eroded, causing the operation to be unable to proceed smoothly and reducing the efficiency of oil and gas production. Therefore, optimizing the anti-erosion coating under high-speed flow conditions in wellbore is a very interesting thing. It can greatly improve operational efficiency. In this paper, laser cladding was used to prepare the new coating used in the PDC drill bit. Then, the effects of tungsten carbide and multi-layer graphene on the microstructure and properties of the tungsten carbide coating were studied. The research results indicate that, for new coatings, 60% tungsten carbide and 0.3% graphene are the optimal ratios. After adding WC, the hardness has significantly improved. However, when the WC content further increases more than 30%, the increase in hardness is relatively small. In addition, when the content of graphene is more than 0.3%, the branched structure became thicker, and not only the segregation of Cr, Si and W became very obvious again, but also the segregation of Fe occurred at the Ni enrichment site. The research results contribute to improving oil and gas production and operational efficiency under high-speed fluid flow conditions in the wellbore.

As the adoption of renewable energy sources grows, ensuring a stable power balance across various time frames has become a central challenge for modern power systems. In line with the "dual carbon" objectives and the seamless integration of renewable energy sources, harnessing the advantages of various energy storage resources and coordinating the operation of long-term and short-term storage have become pivotal directions for future energy storage deployment. To address the complexities arising from the coupling of different time scales in optimizing energy storage capacity, this paper proposes a method for energy storage planning that accounts for power imbalance risks across multiple time scales. Initially, the Seasonal and Trend decomposition using the Loess (STL) decomposition method is utilized to temporally decouple actual operational data. Subsequently, power balance computations are performed based on the obtained data at various time scales to optimize the allocation of different types of energy storage capacities and assess the associated imbalance risks. Finally, the effectiveness of the proposed approach is validated through hourly applications using real-world data from a province in China over recent years.

Green synthesis of silver nanoparticles (AgNPs) using raw Whey has never been reported. Silver nanoparticle formation involves a reduction reaction of silver salt solution with Whey extract. Extract and metal salt concentrations, and temperature can control this reaction. In this work, incubation period, extract, AgNO3, and NaOH concentrations were used as the independent factors using central composite design under response surface methodology. The aim was to elucidate the influence these factors have on the measured UV-Vis absorption spectra fitted with a Voigt function, and to optimize the conditions for nanoparticle formation. The fitting parameters, peak wavelength (λ0), peak area (A), and Full Width at Half Maximum (FWHM), were the responses. Silver nanoparticle formation was only possible in an alkaline environment (pH 10). The peak wavelength and the FWHM are influenced mainly by extract and AgNO3 concentrations. In contrast, the peak area is influenced by a total of 33.54 % from the interaction terms of AgNO3 and extract concentrations with NaOH. Metallic AgNPs were formed for the following parameter ranges: a) Whey (0.4 – 1.6 % v/v), b) AgNO3 (0.15 – 0.6 mM), c) NaOH (10 – 50 mM), and d) Time (20 – 60 min). Silver oxide nanoparticles were also observed.

The construction industry has a notable negative impact on the environment; thus, the promotion of the use of timber structures is an alternative to mitigate its effects. The research develops an artificial intelligence-based decision approach in the calculation of timber structures focused on the enhancement of the sustainability of roof structures. Based on the optimization carried out through genetic algorithms and the framework established in Eurocode 5, a general set of equations has been proposed for a laminated timber roof structure. The tool, which determines the most suitable roof structure for each strength class of laminated timber, allows for the determination of the dimensions of beams and purlins and their respective separations in order to minimize wood consumption. The ultimate goal is to offer multiple solutions regarding strength classes and structural designs in order to foster informed sustainable choices that promote efficient use of resources in construction.

Managing a portfolio whose value closely tracks an index by trading only in a subset of the index constituents involves an NP-hard optimisation problem. In the prior literature, it has been suggested to solve this problem using sequential Monte Carlo (SMC, a.k.a. particle filter) methods. However, this literature does not take transaction costs into account, although transaction costs are the primary motivation for attempting to replicate the index by trading in a subset, rather than the full set of index constituents. This paper extends the SMC approach to index tracking to allow for proportional transaction costs and implements this extended method on empirical data for a variety stock indices. In addition to providing a more practically useful tracking strategy by allowing for transaction costs, we find that including a penalty for transaction costs in the optimisation objective can actually lead to better tracking performance.

Epigallocatechin gallate (EGCG), the principal catechin in green tea, exhibits diverse therapeutic properties. However, its clinical efficacy is hindered by poor stability and low bioavailability. This study investigated solid particle-in-oil-in-water (S/O/W) emulsions stabilized by whey protein isolate (WPI) and sodium caseinate (NaCas) as carriers to enhance the bioavailability and intestinal absorption of EGCG. Molecular docking revealed binding interactions between EGCG and these macromolecules. The emulsions exhibited high encapsulation efficiencies and augmented EGCG bioaccessibility by 64% compared to free EGCG in a simulated gastrointestinal digestion model. EGCG-loaded emulsions demonstrated minimal cytotoxicity towards Caco-2 cells and facilitated EGCG transport across the intestinal epithelial layer without compromising tight junction integrity. Notably, EGCG-loaded emulsions protected Caco-2 cells against oxidative stress by suppressing intracellular reactive oxygen species generation. The results demonstrate the potential of WPI- and NaCas-stabilized S/O/W emulsions to enhance the bioavailability, intestinal absorption, and bioactivity of EGCG, expanding its applications in functional foods and nutraceuticals.

We introduce a special vector field ω on a Riemannian manifold (N^m, g), such that the Lie derivative of the metric g with respect to ω is equal to ρRic, where Ric is the Ricci curvature of (N^m, g) and ρ is a smooth function on N^{m} and call this vector field a ρ-Ricci vector field. We use ρ-Ricci vector field on a Riemannian manifold (N^m, g) and find two characterizations of m-sphere S^m(α). In first result, we show that an m-dimensional compact and connected Riemannian manifold (N^m, g) with nonzero scalar curvature admits a ρ-Ricci vector field ω such that ρ is nonconstant function and the integral of Ric(ω,ω) has a suitable lower bound is necessary and sufficient for (N^m, g) to be isometric to m-sphere S^m(α). In second result, we show that an m-dimensional complete and simply connected Riemannian manifold (N^m, g) of positive scalar curvature admits a ρ-Ricci vector field ω such that ρ is a nontrivial solution of Fischer-Marsden equation and the squared length of the covariant derivative of ω has an appropriate upper bound, if and only if, (N^m, g) to be isometric to m-sphere S^m(α).

A swarm based nature-inspired optimization algorithm namely fruit fly optimization algorithm (FOA) has simple structure and ease of implementation. However, FOA has a low success rate and a slow convergence because FOA generates new positions around the best location using fixed search radius. Several improved FOAs have been proposed. But their exploration ability is questionable. To make the search process to transit from the exploration phase to the exploitation phase smoothly, this paper proposes a new FOA constructed from a cooperation of the multileader and the probabilistic random walk strategies (CPFOA). It has two population types working together. CPFOA's performance is evaluated by 18 well-known standard benchmark, and 30 CEC’2017 functions. The results showed that CPFOA outperforms both the original FOA and its variants in terms of convergence speed and performance accuracy. The results base on CEC’2017 show that CPFOA can achieve a very promising accuracy when compared with the well-known competitive algorithms. CPFOA is applied to optimize two applications; the MLPs classifying real datasets and extracting parameters of T-S fuzzy system for modelling Box and Jenkins gas furnace data set. CPFOA can find parameters having a very high quality compared with the best known competitive algorithms.

This paper investigates an innovative photovoltaic cell configuration, denoted as “Au/CuSCN/RbGeI3/CdTe/ZnO/TiO2/FTO", using SCAPS-1D simulation. The research focuses on optimizing device performance by analyzing key components, including ZnO as the electron transport layer (ETL), RbGeI3 as the perovskite absorber layer, CuSCN as the hole transport layer (HTL), and CdTe as the active buffer layer. A comparison is made with the standard “Au/CuSCN/CH3NH3SnI3/CdTe/ZnO/TiO2/FTO" configuration under dark and illuminated conditions. Through an in-depth investigation involving temperature effects, generation rate analysis, RbGeI3 absorber layer thickness, Nd level, and interface defect levels, an optimized design for a unit area is achieved. The proposed solar cell demonstrates outstanding performance metrics, including an open circuit voltage (Voc) of 0.94V, a short circuit current density (Jsc) of 34.52mA/cm2, a fill factor (FF) of 77.77%, and an energy conversion efficiency (η) of 25.40%. These values significantly outperform the reference models with energy conversion efficiencies of 10.11% and 21.09%. Real-world applicability is validated by implementing these optimized characteristics in a photovoltaic system for Pakistan’s geographical location using PVSyst software. The suggested solar cell achieves a remarkable performance ratio (PR) of 85.6%, surpassing the PR of the reference basic solar cell model at 83%. The findings of this research offer a promising and superior solar cell design, incorporating innovative materials and optimization techniques to achieve exceptional energy conversion efficiency and overall performance. This study’s outcomes have the potential to advance photovoltaic technology and contribute to sustainable energy solutions worldwide.

Lactoperoxidase (LP), which is a high-value minor whey protein, has recently drawn extensive attention from research scientists and industry due to its multi-function and potential therapeutic applications. In this study, the separation and optimization of two similar-sized proteins, LP and lactoferrin (LF) were investigated using strong cation exchange column chromatography. Optimization was started with central composite design based experiments to characterize the importance of different decision variables. The three variables used in the optimization were flow rate, length of gradient and final salt concentration in the linear elution gradient step. The obtained empiric functional model represented the effect of the significant factors on the yield as the objective function. Afterwards, the calibrated mechanistic model was employed to predict accurate optimal set of variables. The optimal operating points were found and the results were compared with validation experiments. Predictions respecting yield confirmed a very good agreement with experimental results while keeping purity, a product quality characteristic, equal or above to a predefined value.

Aging is a major risk factor for the higher incidence and prevalence of chronic conditions, such as cancer, cardiovascular and metabolic diseases, and neurodegenerative diseases. Closely linked with the onset of all these age-related diseases is immunosenescence, a condition defined as progressive reconfiguration of the immune functions leading to an increased susceptibility to infectious diseases, poorer response to vaccination, increased prevalence of cancer, rheumatoid arthritis, and other chronic diseases characterized by a pro-inflammatory state named inflammaging. Given that immunosenescence frames age-related diseases, it is natural to ask how these illnesses are related under the context of innate and adaptative components of the immune system. Knowledge processing by Formal Concept Analysis (FCA) of age-related diseases framed in an immunosenescence multivalued context shows that a hierarchy among these diseases emerges with a subconcept-superconcept nested structure, with two clusters, first made of metabolic diseases, cancer, and cardiovascular diseases. Second metabolic and neurodegenerative diseases and rheumatoid arthritis. Metabolic diseases seem to be a pivot illness and they must be a primary target given their global incidence and prevalence and their cost-effective treatments like regular physical activity, weight loss, healthy diet, stopping smoking, and reducing or managing stress. Another implication of the ontological analysis of age-related diseases is about the nature of immunosenescence, suggesting that initial symptoms of age-related diseases are mainly related to innate immune mechanisms, and developing of severe symptoms of age-related diseases like cancer, cardiovascular or neurodegenerative diseases depends on the activation of acquired immunity processes.

An active power dispatch method for a microgrid (MG) with multi-type loads, renewable energy sources (RESs) and distributed energy storage devices (DESDs) is the focus of this paper. The MG operates in a grid-connected model, and distributed power sources contribute to the service for load demands. The outputs of multiple DESDs are controlled to optimize the active power dispatch. Our goal with optimization is to reduce the economic cost under time-of-use (TOU) price, and to adjust the excessively high or low load rate of distributed transformers (DTs) caused by the peak-valley demand and load uncertainties. To simulate a practical environment, the stochastic characteristics of multi-type loads are formulated. The transition matrix of system state is provided. Then, a finite-horizon Markov decision process (FHMDP) model is established to describe the dispatch optimization problem. A learning-based technique is adopted to search the optimal joint control policy of multiple DESDs. Finally, simulation experiments are performed to validate the effectiveness of the proposed method, and the fuzzification analysis of the method is presented.

Extraction techniques of important bioactive molecules from the major concern of Seafood byproducts are getting emphasis for better valorization. Employing green extraction technologies for efficient and quality production of these bioactive molecules is also strictly required. Hence, understanding the extraction process parameters to effectively design an applicable optimization strategy could make this real. In this review, statistical optimization strategies applied for the extraction process parameters of bioactive molecules from Seafood byproducts are focused. The type of experimental designs, and techniques applied to criticize and validate the effects of independent variables on the extraction output was addressed. Dominant parameters studied were enzyme/substrate ratio, pH, time, temperature and power of extraction instruments. The yield of bioactive compounds, chitin and chitosan, proteins and peptides, enzymes and carotenoids (Astaxanthins) were the most studied responses. Efficiency and/or economic and quality considerations and their selected optimization strategies that favour the production of potential bioactive molecules were also reviewed.

The integral extraction via microwave-assisted hydrodiffusion and hydrodistillation of water-soluble bioproducts contained in the peel of Opuntia ficus-indica white and red cultivars harvested in Sicily, affords red and stable aqueous extracts mostly containing valued betanin, pectin and biophenols. Potentially useful as nutraceutical products, these aqueous extracts are a source of valued ingredients in high demand for a number of important food, cosmetic, beverage and nutraceutical applications.

Single valued neutrosophic set has king power to express uncertainty characterized by indeterminacy, inconsistency and incompleteness. Most of the existing single valued neutrosophic cross entropy bears an asymmetrical behavior and produce an undefined phenomenon in some situations. In order to deal with these disadvantages, we propose a new cross entropy measure under single valued neutrosophic set (SVNS) environment namely SN- cross entropy and prove its basic properties. Also we define weighted SN-cross entropy measure and investigate its basic properties. We develop a new multi attribute group decision making (MAGDM) strategy for ranking of the alternatives based on the proposed weighted SN-cross entropy measure between each alternative and the ideal alternative. Finally, a numerical example of MAGDM problem of investment potential is solved to show the validity and efficiency of proposed decision making strategy. We also present comparative anslysis of the obtained result with the results obtained form the existing solution strategies in the solution.

This research study focuses on addressing practical optimization challenges in audio-visual content using advanced computational intelligence methods, with a specific emphasis on privacy-preserving issues. The research will be presented as a proposal and can be conducted based on the provided ideas. Computational intelligence encompasses various approaches, including evolutionary algorithms, learning methods, fuzzy systems, and neural networks, which have become essential tools for tackling complex engineering optimization problems due to computational expenses, dimensional complexities, and interdisciplinary integration. The research objectives include a thorough investigation of optimization challenges in audio-visual content, the delineation of problem characteristics, and the development of relevant methodologies based on these specifications. The main goals of the study, titled "Advanced Computational Intelligence Assisted Less-Expensive Privacy-Preserving Optimization," encompass the development of a metamodel-based learning algorithm integrated with evolutionary computation for privacy-preserving optimization, less-expensive signal watermarking optimization using hybrid metamodeling and evolutionary algorithms, and a closed-loop robust intelligent PID control system applied in real-time dynamic signal watermarking. Additional objectives may be defined as the research progresses and further background review is conducted.

There is no method of predicting the price of an option other than hedging strategies such as the binomial hedging strategy, the Black-Scholes hedging strategy and others. The price of an option is defined to be equal to the amount the seller needs to implement a hedging strategy. We will study these two basic hedging strategies in terms of their feasibility and we will see that the Black-Scholes hedging strategy is not feasible because this strategy demands instantaneously rebuilding the replicating portfolio. Consequently, the real world prices of the options are not relevant at all with the Black-Scholes hedging strategy! We will suitably redefine the binomial hedging strategy so that it will be practically useful and present other feasible and generally more effective hedging strategies with some of them are practically useful for options with no tradable underlying assets. Finally, we will mention some open questions related to the above.

Objective: The aim of this study was to optimize the fermentation process of Radix Ranunculi ternate via microbial fermentation and analyze the changes in the contents of the main components, the antioxidant and hypoglycemic capacities of the extract before and after fermentation. Methods: The solid-state fermentation process was optimized using single-factor tests and the response surface method, with the yield of the alcohol extract of R. ternate as an evaluation index. Results: The best fermentation process was optimized using solid-state endophytic fungus fermentation technology as follows: strain addition ratio of Chaetomium globosum/Fusarium equiseti =1:1, fermentation for 5 d, sieve size of 40 mesh, liquid/material ratio of 0.8:1 mL·g−1, fermentation temperature of 31 °C, and inoculation amount of 7.5%. Under the optimized conditions, the contents of the water-soluble extract and total polysaccharides decreased by 12.71% and 12.95%, respectively, in the fermentation, The contents of ethanol-soluble-extract, flavonoids, saponins, polyphenols, organic acids, and total amino acids of fermented R. ternate increased by 19.77%, 57.14%, 79.67%, 14.29%, 17.63% and 3.82%, respectively, and the scavenging rate for DPPH, ABTS+, ·OH free radicals and inhibitory rate for α-amylase also increased by 19.02%, 14.17%, 7.53% and 34.54%, respectively, compared with unfermented R. ternate. Conclusions: Solid-state fermentation opens new avenues for the development and application of R. ternate as natural antioxidant and hypoglycemic food.

Studying concurrent systems is to sort the read/write and control events in the concurrent system according to the order, or in partial order, or in strict order. Because of the concurrency of events and the timeliness of writing events, there will be overlap between events, which requires interval order analysis. A single start and end sequence to represent the entire hierarchical order structure as well as all equivalent spaced order observations.a single sequence of beginnings and endings to represent the entire stratified order structures as well as all equivalent interval order observations. Mazurkiewicz traces and Comtracks are hierarchical traces, but they cannot describe interval traces. In a few sentences of this summary, we can tell the problems (petri interval traces with data), the previous work (Mazurkiewicz traces, Comtracks), the reasons that cannot be solved, and our own solutions (DPN: Petri nets with data, interval traces). This paper focuses on a BE (Beginnings and Endings) sequence representing an equivalent class of runs, or targets. Our goal is to have a BE sequence to represent the entire hierarchical order structure, that is, all equivalent observable interval orders.

A method of accuracy error compensation for the time interval is examined, allowing to eliminate the dependence of accuracy error on the duration of measured intervals and minimising the influence of destabilising factors - ambient temperature changes and the initial deviation of the meter clock generator frequency from the nominal value. The compensation method is based on a calibration procedure that measures precise time intervals under conditions of changing ambient temperature. Then the dependence of the accuracy error on temperature for a particular meter is recorded. Based on these data, a correction table is compiled containing correction factors and temperature values at which these factors were determined. Under real measurement conditions, the correction factor corresponding to the current temperature is determined from the table for measured results correction. The table with correction factor values could be stored in the memory of the meter or processing computer. Experimental verification of the method showed that applying a correction for a meter with a standard XO class clock generator (certificated instability of ±50 ppm) can obtain an equivalent clock generator instability of ±0.15 ppm. The application of the method is efficient in cases where the use of high-end clocking to ensure the required measurement accuracy is not economically feasible.

The incremental sheet forming represents a relatively recent technology that guarantees high customization, thanks to the layered manufacturing principle typical of rapid prototyping, and cost-effectiveness, because it does not require dedicated equipment. Research has initially shown that this process is effective in metal materials capable of withstanding plastic deformation but, in recent years, the interest in this technique has been increasing for the manufacture of complex polymer sheet components as an alternative to the conventional technologies, based on heating-shaping-cooling manufacturing routes. Conversely, incremental formed polymer sheets can suffer from some peculiar defects, for example twisting. To reduce the risk of this phenomenon and the occurrence of failures, a viable way is to choose toolpath strategies that make the tool/sheet contact conditions less severe, and this represents the main goal of the present research. Polycarbonate sheets were worked by incremental forming; in detail, cone frusta with a fixed wall angle were manufactured with a reference and a stair toolpath strategy, and both the forming forces and the twist angle were monitored. The analysis of the results highlighted that a stair toolpath involving an alternation of diagonal up and vertical down steps represents a useful strategy to mitigate the forming forces and, with them, the occurrence of the twisting phenomenon in incremental formed thermoplastic sheets.

Cobalt oxide nanoparticles are promising candidates for various kinds of practical application. The interest of researchers and scientists in these nanoparticles is due to their unique physical and chemical properties such as density, melting point, magnetic characteristics and band gap. The need to develop high performance and low-cost technologies for obtaining Co3O4 nanoparticles is a major reason in research in this area. The widespread commercial use of Co3O4 nanoparticles will open doors for numerous novel cost effective technologies, which are mostly dependent on the type of synthesis method and raw materials. A possible solution to this problem is to use Cobalt nitrates as a cost-effective precursor using the solution combustion method. Solution combustion synthesis method is one of the best candidate methods that have the potential for high performance and is also cost-effective. This review examines recent progress in the synthesis of Co3O4 nanoparticles by solution combustion method and underscores their significance across various fields, highlighting the need for further research and exploration of their multifaceted applications. In addition, the most recent advancements in the applications of Co3O4 nanoparticles in sensitive sensing, catalysis, supercapacitors/batteries and water treatment/pollutants removal are reviewed and described, focusing on current trends, challenges, and future outlooks.

Fingerhuthia africana Lehm belongs to family Poaceae, is an erect perennial grass used traditionally to cure different diseases. The current study was carried out to find the bioactive compounds by GC-MS, elemental analysis through atomic absorption spectrophotometry, proximate analysis by AOAC, genotoxic activity through comet assay, antioxidant activity through DPPH and antidiarrheal activity through castor oil induce diarrhea followed by charcoal meal on mice model. GC-MS chromatogram represents different compounds detected in the crude extract. Major pharmacological bioactive compounds are 4H-Pyran-4-one, 2,3-dihydro-3,5-dihydroxy-6-methyl-; 4-Methyl itaconate; .alpha.-Terpineol; 1,2,3-Propanetriol, 1-acetate; Benzofuran, 2,3-dihydro-; Caryophyllene oxide; Hinesol; n-Hexadecanoic acid; 9,12-Octadecadienoic acid (Z,Z)-, methyl ester; Hexadecanoic acid and methyl ester. Elemental analysis of stem, leaves and roots of the plant show the presence of (macro and micro) nutrients such as Ca, Mg, K, Na, Cu, Pb, Zn, Mn, Fe, Cd and Co were absent in all parts. Proximate analysis of different parts revealed the presence of moisture contents (8.57%), ash (9.77%), fats contents (5.96%), fibers contents (45.03%), protein (3.62%), carbohydrates (39.71%) and Gross energy (Kcal/100g) (220.10). The ethanolic extract show dose-dependent genoprotective potential (127.38 ± 1.16), (83.28 ± 0.65), and (44.08 ± 1.40) at 50, 75, and 100 mg/100 ml, respectively, as compared to the methanolic extract which show genotoxic activity (85.13 ± 1.23) at high dose. After 90 minutes at a concentration of 300 (g/ml), methanolic extract demonstrated the greatest antioxidant potential (79.5%), followed by aqueous extract (76.5%). The methanolic extract of F. africana demonstrated antidiarrheal efficacy, with the maximum inhibition of charcoal movement (83.78%) occurring at a dosage of 300 mg/kg, followed by doses of 200 and 100 mg/kg, 73.26% and 59.56%, respectively. The current research highlights that the plant contains a substantial quantity of micro and macro nutrients, possesses high nutritional value, and exhibits pharmacological activities. These properties render the plant suitable for developing remedies to treat various therapeutic diseases.

Amid the swift progression of the global automobile industry, the aspiration for lightweight vehicle design has surfaced as a crucial approach to boost fuel efficiency and curtail environmental impact. The objective of this study revolves around achieving holistic optimization of vehicle structure via detailed scrutiny of vehicle process characteristics, amalgamated with a Back Propagation neural network (BPNN) optimized by a genetic algorithm (GA) and a topology optimization (TO) method.The process initiates with an examination of the vehicle's technical characteristics, succeeded by an optimization protocol that couples GA with BPNN. This exhaustive optimization procedure derives the best-fit values of design parameters and identifies the globally optimal lightweight design approach. Subsequently, a comprehensive structural optimization is actualized by modifying the topological distribution of the structure.A simulation experiment of the conceptual car body beam skeleton is conducted as a conclusive step, and the anti-collision capacity of the car body beam skeleton is assessed by measuring deformation intrusion. The findings reveal that in the vehicle topology optimization, a comparative analysis of pre and post-optimization results indicates an improved topological density across diverse sections. The topological density of the vehicle's frontal structure escalates from 0.75 to 0.8. Following optimization, the stiffness assessment records a marginal increase (within the range of 0.02–0.05), implying that the lightweight design does not compromise the general rigidity of the structure.The optimized body structure manifests superior crashworthiness in the crash test: the deformation intrusion diminishes by 27% in front-end collisions. In side impacts, the deformation and intrusion at critical points are reduced by 13.15% to 10% respectively. The comprehensive method proposed herein proves to be an efficient strategy to actualize the lightweight design of vehicles.

In August 4 2011, United Nations Environmental Program (UNEP) submitted an unprecedented, scientific, groundbreaking Environmental Assessment Report (EAR) of Ogoniland, to the Nigerian government. This was the outcome of a 14–month intensive evaluation of the extent of pollution. It was intended that UNEP’s recommendations would be implemented to restore the devastated environment, on the one hand, and on the other, counteract the numerous environmental health issues that have for decades, plagued Ogoniland. However, five years post EAR, and, despite the seriousness of the situation, no significant resolution has occurred, both on the part of the government, and on the part of Shell Petroleum Development Company (SPDC) or Shell. To date, millions of Niger Delta residents, particularly those living in the oil-bearing communities, continue to suffer severe consequences. Although, the assessment was conducted in Ogoniland, other communities in the Niger Delta are also affected. This article explores prevailing issues, using Ogoniland (a microcosm of the Niger Delta) as an example. A multidisciplinary approach for sustainable mitigation of environmental health risks in the Niger Delta is paramount, and Environmental Management tools offer valuable strategies. Adopting UNEP’s recommendations for addressing environmental health problems requires implementing the Environmental Management/Environmental Management System (EM/EMS) model.

The aim of this tutorial is to help students grasp the theory and applicability of support vector machines (SVMs). The contribution is an intuitive style tutorial that helped students gain insights into SVM from a unique perspective. An internet search will reveal many videos and articles on SVM, but many of them give simplified explanations that leave gaps in the derivations that beginning students cannot fill. Most free tutorials lack guidance on practical applications and considerations. The software wrappers in popular programming libraries such as Python and R hide many of the operational complexities. Free software tools often use default parameters that ignore domain knowledge or leave knowledge gaps about the important effects of SVM hyperparameters, resulting in misuse and subpar outcomes. The author uses this tutorial as a course reference for students studying artificial intelligence and machine learning. The tutorial derives the classic SVM classifier from first principles and then derives the practical form that a computer uses to train a classification model. An intuitive explanation about confusion matrices, F1 score, and the AUC metric extend insights into the inherent tradeoff between sensitivity and specificity. A discussion about cross-validation provides a basic understanding of hyperparameter tuning to maximize generalization by balancing underfitting and overfitting. Even seasoned self-learners with advanced statistical backgrounds have gained insights from this tutorial style of intuitive explanations, with all related considerations for tuning and performance evaluations in one place.

In this paper, a positive answer to the open question of Fabino et al. is given, and the concept of I\c sik type set valued contractions is introduced and fixed point theorem for such contractions is established. Examples to support main theorems are given, and an application to integral inclusion is given.

This proposed research explores a novel approach to image classification by deploying a complex-valued neural network (CVNN) on a field-programmable gate array (FPGA), specifically for classifying 2D images transformed into polar form. The aim of this research is to address the limitations of existing neural network models in terms of energy and resource efficiency, by exploring the potential of FPGA-based hardware acceleration in conjunction with advanced neural network architectures like CVNNs. The methodological innovation of this research lies in the Cartesian to polar transformation of 2D images, effectively reducing the input data volume required for neural network processing. Subsequent efforts focused on constructing a CVNN model optimized for FPGA implementation, emphasizing the enhancement of computational efficiency and overall performance. The experimental findings provide empirical evidence supporting the efficacy of the image classification system developed in this study. One of the developed models, CVNN_128, achieves an accuracy of 88.3% with an inference time of just 1.6ms and a power consumption of 4.66mW for the classification of the MNIST test dataset consists of 10,000 frames. While there is a slight concession in accuracy compared to recent FPGA implementations that achieve 94.43%, our model significantly excels in classification speed and power efficiency—surpassing existing models by more than a factor of 100. In conclusion, the paper demonstrates the substantial advantages of FPGA-implementation of CVNNs for image classification tasks, particularly in scenarios where speed, resource, and power consumption are critical. The study’s reproducible results and corresponding code are available on GitHub at the following link: https://github.com/mahmad2005/CVNNonFPGA

This paper presents an unsupervised feature selection method for multi-dimensional histogram-valued data. We define a multi-role measure, called the compactness, based on the concept size of given objects and/or clusters described by a fixed number of equal probability bin-rectangles. In each step of clustering, we agglomerate objects and/or clusters so as to minimize the compactness for the generated cluster. This means that the compactness plays the role of a similarity measure between objects and/or clusters to be merged. To minimize the compactness is equivalent to maximize the dis-similarity of the generated cluster, i.e., concept, against the whole concept in each step. In this sense, the compactness plays the role of cluster quality. We also show that the average compactness of each feature with respect to objects and/or clusters in several clustering steps is useful as feature effectiveness criterion. Features having small average compactness are mutually covariate, and are able to detect geometrically thin structure embedded in the given multi-dimensional histogram-valued data. We obtain thorough understandings of the given data by the visualization using dendrograms and scatter diagrams with respect to the selected informative features. We illustrate the effectiveness of the proposed method by using an artificial data set and real histogram-valued data sets.

This paper consists of two parts. In part I some new relations for a field theory with time intervals are derived. One concept of field theory evaluated is complementarity, another is field operators both defined within a time interval description. Part II includes specific results and commentary. Discussed are time interval dependent wave propagation surfaces for star source emission waves and derived is a metric propagation surface area requirement. The results allow to consider one same field that like gravitation within General Relativity applies to both non zero and zero mass. The associated field energy is space time dependent for non zero mass, and is related to a space time dependent metric tensor for zero mass wave particles. Defined is internal energy transfer where wave particle numbers increase linearly and mass and momentum diminish, decrease inversely with the distance from the wave emission source. The commentary are applications related to cosmological overall volume and temperature dependence.

The Ramanujan primes are the least positive integers Rn having the property that if m ≥ Rn, then π_m − π_(m/2) ≥ n. This document develops several bounds related to the Ramanujan primes, sharpening the currently known results. The theory presented is by no means exhaustive, however it provides insights for future research work. Alternatively, we may say that it is a road map which may be followed to make further discoveries.

In the manufacturing industry, orders are typically scheduled and delivered through batches, and the probability of machine failure under high-load operation is high. On this basis, we focus on a single machine batch scheduling problem with a maintenance interval (SMBSP-MI). The studied problem is expressed by three-field representation as 1|B,MI|\sum{F_j+\mu}m, and the optimization objective is to minimize total flow time and delivery costs. Firstly, 1|B,MI|\sum{F_j+\mu}m is proved to be NP-hard by Turing reduction. Secondly, shortest processing time (SPT) order is shown the optimal scheduling of SMBSP-MI, and a dynamic programming algorithm based on SPT (DPA-SPT) with the time complexity of O(n^3T_1) is proposed. A small-scale example is designed to verify the feasibility of DPA-SPT. Finally, DPA-SPT is approximated to a fully-polynomial dynamic programming approximation algorithm based on SPT (FDPAA-SPT) by intervals partitioning technique. The proposed FDPAA-SPT runs in O(\frac{n^5}{\varepsilon^2})\ time with the approximation (1+\varepsilon).

Type-2 fuzzy sets were introduced by L. Zadeh aiming at modelling some settings in which fuzzy sets (usually called type-1 fuzzy sets) are not sufficient to reflect certain uncertainty degrees - loosely speaking, they are fuzzy sets whose membership degrees are ordinary fuzzy sets. On the other hand, fiber bundles are topological entities of extreme importance in Mathematics itself and many other scientific areas, like Physics (General Relativity, Field Theory etc.), finance modelling, and statistical inference. The present work introduces a conceptual link between the two ideas and conjectures about the potential mutual benefits that can be obtained from this viewpoint.As an objective and usable product of the presented ideas, it is described a framework for defining type-2 fuzzy hedges, proper to operate on interval type-2 fuzzy sets.

In this study, we address the formidable challenge of solving large-scale Max-Cut problems (MCP). We introduce a rapid computational procedure utilizing a hybrid 1-flip/r-flip local search heuristic. This innovative strategy significantly reduces the computational time required for MCP problems while consistently generating solutions of exceptional quality. The paper presents substantial computational insights, showcasing the effectiveness of our approach on very-large-scale Max-Cut instances with varying densities. Our proposed heuristic is rigorously evaluated by comparing its performance against a quantum annealing solver, leveraging a multi-start Tabu Search framework. The results underscore the potency of this unique combination as an efficient and effective solution for large-scale QUBO problems. Notably, our hybrid heuristic consistently delivers high-quality solutions within the stringent CPU time limits of 600 seconds, demonstrating its efficacy across Max-Cut instances ranging from 10,000 to 40,000 variables. This research contributes to advancing the state-of-the-art in large-scale QUBO problem-solving, offering a powerful and time-efficient approach with broad applicability.

Hybrid Renewable Energy Systems (HRES) integrate renewable sources, storage, and optionally conventional energies, offering an eco-friendly solution to fossil fuels. Microgrids (MGs) bolster HRES integration, enhancing energy management, resilience, and reliability at various levels. This study, emphasizing the need for refined optimization methods, investigates three themes: renewable energy, microgrid, and multiobjective optimization (MOO), through a bibliometric analysis of 470 Scopus documents from 2010-2023, analyzed with SciMAT software. It segments the research into two periods, 2010-2019 and 2020-2023, revealing a surge in MOO focus, especially in the latter period, with a 35% increase in MOO-related research. This indicates a shift towards com-prehensive energy ecosystem management that balances environmental, technical, and economic elements. The initial focus on MOO, genetic algorithms, and energy management systems has expanded to include smart grids and electric power systems, with MOO remaining a primary theme in the second period. The increased application of Artificial Intelligence (AI) in optimizing HMGS within the MOO framework signals a move towards more sustainable, intelligent energy solutions. Despite progress, challenges remain, including high battery costs, the need for reliable MOO data, the intermittency of renewable energy sources, and HMGS network scalability issues, highlighting directions for future research.

This overview initially describes insect immune reactions and then brings together present knowledge of the interactions of vector insects with their invading parasites and pathogens. It is a way of introducing this special issue with subsequent papers presenting the latest details of these interactions in each particular group of vectors. Hopefully, this paper will fill a void in the literature since brief descriptions of vector immunity have now been brought together in one publication and could form a starting point for those interested and new to this important area. Descriptions are given on the immune reactions of mosquitoes, blackflies, sandflies, tsetse flies, lice, fleas and triatomine bugs. Cellular and humoral defences are described separately but emphasis is made on the co-operation of these processes in the completed immune response. The paper also emphasises the need of great care in extracting haemocytes for subsequent study as appreciation of their fragile nature is sometimes overlooked with non-sterile media, smearing techniques and excessive centrifugation sometimes used. The potential vital role of eicosanoids in the instigation of many of the immune reactions described is also discussed. Finally, the priming of the immune system, mainly in mosquitoes, is considered and one possible mechanism is presented

Despite several decades’ effort to detect and identify phytoplasmas (Tenericutes: Mollicutes) using PCR and Sanger sequencing focusing on diseased plants, knowledge of phytoplasma biodiversity and vector associations remains highly incomplete. To improve protocols for documenting phyto-plasma diversity and ecology, we used DNA extracted from phloem-feeding insects and com-pared traditional Sanger sequencing with a next-generation sequencing method, Anchored Hy-brid Enrichment (AHE) for detecting and characterizing phytoplasmas. Among 22 of 180 leaf-hopper samples that initially tested positive for phytoplasmas using qPCR, AHE yielded phyto-plasma 16Sr sequences for 20 (19 complete and 1 partial sequence) while Sanger sequencing yield-ed sequences for 16 (11 complete and 5 partial). AHE yielded phytoplasma sequences for an addi-tional 7 samples (3 complete and 4 partial) that did not meet the qPCR threshold for phytoplasma positivity or yielded non-phytoplasma sequences using Sanger sequencing. This suggests that AHE is more efficient for obtaining phytoplasma sequences. Twenty-three samples with sufficient data were classified into eight 16Sr subgroups (16SrI-B, I-F, I-AO, III-U, V-C, IX-J, XI-C, XXXVII-A), three new subgroups (designated as 16SrVI-L, XV-D, XI-G) and three possible new groups. Our results suggest that screening phloem-feeding insects using qPCR and AHE sequencing may be the most efficient method for discovering new phytoplasmas.

The Landauer principle asserts that “the information is physical”. In its strict meaning Landauer's principle states that there is a minimum possible amount of energy required to erase one bit of information, known as the Landauer bound W=kBTln2 where T is the temperature of a thermal reservoir used in the process and kB is Boltzmann’s constant. Modern computers use the binary system in which a number expressed in the base-2 numeral system. We demonstrate that the Landauer principle remains valid for the physical computing device based on the ternary and more generally N-based logic. The energy necessary for erasure of one bit of information (the Landauer bound) W=kBTln2 remains untouched for the computing devices exploiting a many-valued logic.

Approximately half of head and neck squamous cell carcinoma (HNSCC) cases recur, and most of them recur within the first two years after treatment. Although it has been suggested that the interval to recurrence after radical treatment and prognosis in patients with HNSCC are associated, investigations are insufficient. In this study, patients diagnosed with HNSCC at Kyushu University Hospital were retrospectively analyzed (n = 500). A total of 234 patients experienced recurrence, with 110 and 124 patients experiencing early recurrence (ER) (recurrence within 2–6 months) and late recurrence (LR) (recurrence after 7 months), respectively. There were two independent risk factors for poor prognosis in the multivariate analyses: ER (hazard ratio [HR] = 3.200, 95% confidence interval [CI] = 1.570–6.521, p = 0.001) and no radiotherapy (HR = 0.374, 95% CI = 0.191–0.733, p = 0.004). In patients with recurrent HNSCC, a short interval to recurrence is a risk factor for poor prognosis and survival. This study demonstrated the prognostic value of ER in patients. During the selection of treatment for patients with recurrence, the recurrent area, initial treatment content, and strategy of changing salvage therapy depending on the recurrence status should be considered.

Measurement uncertainty is typically expressed in terms of a symmetric interval , where denotes the measurement result and the expanded uncertainty. However, in the case of heteroscedasticity, symmetric uncertainty intervals can be misleading. In this paper, a different approach for the calculation of uncertainty intervals is introduced. This approach is applicable when a validation study has been conducted with samples with known concentrations. It will be shown how, under certain circumstances, asymmetric uncertainty intervals arise quite naturally and lead to more reliable uncertainty intervals.

The analysis and measurement of poverty is a crucial issue in the field of social science. Poverty is a multidimensional notion that can be measured using composite indicators relevant to synthesizing statistical indicators. Subjective choices could, however, affect these indicators. We propose interval-based composite indicators to avoid the problem, enabling us in this context to obtain robust and reliable measures. Based on a relevant conceptual model of poverty we have identified, we will consider all the various factors identified. Then, considering a different random configuration of the various factors, we will compute a different composite indicator. We can obtain a different interval for each region based on the distinct factor choices on the different assumptions for constructing the composite indicator. So we will create an interval-based composite indicator based on the results obtained by the Monte-Carlo simulation of all the different assumptions. The different intervals can be compared, and various rankings for poverty can be obtained. For their parameters, such as center, minimum, maximum, and range, the poverty interval composite indicator can be considered and compared. The results demonstrate a relevant and consistent measurement of the indicator and the shadow sector's relevant impact on the final measures.

This study was designed for the first time to improve phenolic yield and antioxidant activity of ultrasonic-assisted extraction from Acer truncatum leaves (ATL) using response surface methodology, and phenolic composition in ATL extracted under the optimized condition were characterized by UPLC-QTOF-MS/MS. Solvent and extraction time were selected based on preliminary experiments, and a four-factors-three-levels central composite design was conducted to optimize solvent concentration (X₁), material-to-liquid ratio (X₂), ultrasonic temperature (X₃) and power (X₄) for an optimal total phenol yield (Y₁) and DPPH• antioxidant activity (Y₂). The results showed that the optimal combination was ethanol: water (v:v) 66.21%, material-to-liquid ratio 1:15.31 g/mL, ultrasonic temperature 60 °C, power 267.30 W, and time 30 min with three extractions, giving a maximal total phenol yield of 7593.62 mg gallic acid equivalent /100 g d.w. and a maximal DPPH• antioxidant activity of 74241.61 μmol Trolox equivalent/100 g d.w.. Furthermore, 22 phenolics were first identified in ATL extract obtained under the optimized conditions, indicating that gallates, gallotannins, quercetin, myricetin and chlorogenic acid derivatives were the main phenolic composition in ATL. What’s more, a gallotannins pathway existing in ATL from gallic acid to penta-O-galloyl-glucoside was interpreted. All these results provided practical information aiming at full utilization of phenolics in ATL, together with fundamental knowledge for further research.

Aortic valve stenosis and malignancy frequently coexist and share the same risk factors as atherosclerotic disease. Data reporting the prognosis of patients with severe aortic stenosis and cancer are limited. Tailoring the correct and most optimal care for cancer patients with severe aortic stenosis is complex. Cancer patients may be further disadvantaged by aortic stenosis if it interferes with their treatment by increasing the risk associated with oncologic surgery and compounding the risks associated with cardiotoxicity and heart failure (HF). Nowadays, several therapeutic options are available for aortic valve stenosis (surgical valve replacement , transcatheter valve implantation, balloon valvuloplasty, or medical therapy), but in presence of malignancy, the use of one of these versus the others should be decided on a case-by-case approach, depending on cancer stage and associated treatment, expected outcome, comorbidities and after an accurate physical examination and Doppler-echocardiography which are the key tools for diagnosing and evaluating aortic stenosis. The current review considers the available data on the association between aortic stenosis and cancer, and therapeutic options.

The description of the microscopic world in quantum mechanics is very different from that in classical physics, and there are some points of view that are contrary to intuition and logic. The first is the loss of reality, the behavior of micro particles shows randomness and hopping. The second is the loss of certainty, the conjugate physical variables of a system cannot be determined synchronously, they satisfy the Heisenberg uncertainty principle. The third is the non-local correlation. The measurement of one particle in the quantum entanglement pair will change the state of the other entangled particle simultaneously. In this paper, some concepts related to quantum entanglement, such as EPR correlation, quantum entanglement correlation function, Bell's inequality and so on, are analyzed in detail. Analysis shows that the mystery and confusion in quantum theory may be caused by the logical problems in its basic framework. Bell's inequality is only a mathematical theorem, but its physical meaning is actually unclear. The Bell state of quantum entangled pair may not satisfy the dynamic equation of quantum theory, so it cannot describe the true state of microscopic particles. In this paper, the correct correlation functions of spin entanglement pair and photonic entanglement pair are strictly derived according to normal logic. Quantum theory is a more fundamental theory than classical mechanics, and they are not parallel relation in logic. However, there are still some unreasonable contents in the framework of quantum theory, which need to be improved. In order to disclose the real relationship between quantum theory and classical mechanics, we propose some experiments which show the wave-particle duality simultaneously and provide intuitionistic teaching materials for the new interpretation of quantum theory.

Knee osteoarthritis (OA) is the most common joint disease worldwide. Exercise therapy has been identified as a first-line treatment option in patients suffering from knee OA. High-intensity interval training (HIIT) is an innovative exercise modality with potential in improving various disease-related outcomes. The purpose of this review is to explore the impact of HIIT on knee OA symptoms and physical functioning. A comprehensive search of scientific electronic databases was conducted to identify the articles on the effects of HIIT on knee OA. Thirteen studies were included in this review. Nine compared the effects of HIIT with those of low-intensity training, moderate-intensity continuous training, or a control group. Three evaluated the effects of HIIT alone. Eight reported a decrease in knee OA symptoms, and eight reported an increase in physical functioning. HIIT was shown to improve knee OA symptoms and physical functioning, but also aerobic capacity, muscle strength, and quality of life with minimal or no adverse events. However, compared to other exercise modalities, no clear superiority of HIIT was found. HIIT is a promising exercise strategy in patients with knee OA: anyway, the actual quality of evidence remains very low, and more high-quality studies are needed to confirm these promising outcomes.

Agricultural greenhouse is largely answered in the agricultural sphere, despite the shortcomings it has, including overheating during the day and night cooling which sometimes results in the thermal inversion mainly due to its low inertia. The glasshouse dressed chapel is relatively more efficient than the conventional tunnel greenhouse. Its proliferation on the ground is more or less timid because of its relatively high cost[14-22]. Agricultural greenhouse aims to create a favorable microclimate to the requirements of growth and development of culture, from the surrounding weather conditions, produce according to the cropping calendars fruits, vegetables and flower species out of season and widely available along the year. It is defined by its structural and functional architecture, the quality thermal, mechanical and optical of its wall, with its sealing level and the technical and technological accompanying[12-13]. The greenhouse is a very confined environment, where multiple components are exchanged between key stakeholders and them factors are light, temperature and relative humidity[8]. This state of thermal evolution is the level sealing of the cover of its physical characteristics to be transparent to solar, absorbent and reflective of infrared radiation emitted by the enclosure where the solar radiation trapping effect otherwise called "greenhouse effect" and its technical and technological means of air that accompany. The socio-economic analysis of populations in the world leaves appear especially the last two decades of rapid and profound transformations These changes are accompanied by changes in eating habits, mainly characterized by rising consumption spread along the year[14]. To effectively meet this demand, greenhouse-systems have evolved, particularly towards greater control of production conditions (climate, irrigation, ventilation techniques, CO2 supply, etc ...). Technological progress has allowed the development of greenhouses so that they become increasingly sophisticated and of an industrial nature (heating, air conditioning, control, computer, regulation, etc ...). New climate driving techniques have emerged, including the use of control devices from the classic to the use of artificial intelligence[10-11] such as neural networks and / or fuzzy logic, etc... As a result, the greenhouse growers prefer these new technologies while optimizing the investment in the field to effectively meet the supply and demand of these fresh products cheaply and widely available throughout the year.

Brachycephalic dogs are not only affected by brachycephalic obstructive airway syndrome (BOAS), but also comprise up to 30% of canine patients seen by veterinary dermatologists, with English Bulldogs and Pugs particularly overrepresented. Some skin diseases are associated with the abnormal anatomic conformation of brachycephalic dogs, while for others there is a underlying genetic basis or a general predisposition. Anatomic alterations associated with brachycephaly, leading to fold formation of the skin and stenosis of the ear canal, together with primary immunodeficiencies described in some breeds, favor the development of pyoderma, Malassezia dermatitis and otitis externa/media. Frequently neglected but often lifelong dermatological problems of brachycephalic dogs are an important consideration when discussing genetic and medical conditions affecting the welfare of those dogs. Here we review the current state of knowledge concerning dermatological problems of brachycephalic dogs, and combine it with clinical experience in the management of these challenging disorders.

The weight coefficients of the diaphragm spring depend on experiences in the traditional optimization. However, this method not only cannot guarantee the optimal solution but it is also not universal. Therefore, a new optimization target function is proposed. The new function takes the minimum of average compress force changing of the spring and the minimum force of the separation as total objectives. Based on the optimization function, the result of the clutch diaphragm spring in a car is analyzed by the non-dominated sorting genetic algorithm (NSGA-II) and the solution set of Pareto is obtained. The results show that the pressing force of the diaphragm spring is improved by 4.09%by the new algorithmand the steering separation force is improved by 6.55%, which has better stability and steering portability. The problem of the weight coefficient in the traditional empirical design is solved. The pressing force of the optimized diaphragm spring varied slightly during the abrasion range of the friction film, and the manipulation became remarkably light.

Micellar Casein Concentrate (MCC) is manufactured from microfiltration (MF) of skim milk utilizing ceramic or polymeric membrane filtration. While ceramic filtration has higher efficiency, use of polymeric is cost effective and the process is familiar to several US dairy processors. The aim of the present study was to develop an optimized membrane filtration process to produce MCC using spiral wound polymeric membrane filtration (SW MF) system by systematic selection of transmembrane pressure (TMP) and level of diafiltration (DF). Using skim milk as feed material, preliminary lab-scale MF experiments were conducted using 0.5 µm polyvinylidene fluoride (PVDF) membrane. Three TMP (34.5, 62.1, and 103.4 kPa) and three levels of DF (70, 100, and 150%) along with a process without DF as control were used in the study. Effect of TMP and effectiveness of DF on flux rates, SP removal, casein to total protein (CN/TKN) ratio, casein to true protein (CN/TP) ratio, rejection of casein (rej CN) and SP (rej SP) were evaluated. At all TMP values used in the study, the overall flux (O Flux) increased with the level of DF. Highest O Flux of 30.77 liter per meter square per hour (LMH) was obtained with 34.5 kPa pressure and 150% DF. The impact of DF was more pronounced at lower pressures than at the higher pressures used in the study. With controlled DF, instantaneous flux was maintained within 80% of initial flux for the entire process run. For all the experiments, casein has a rejection of 0.97 to 1.0, while serum protein has the lowest rejection of 0.10 at 34.5 kPa pressure and 150% DF level. Use of 34.5 kPa and DF level of 150 % contributed to 81.45% SP removal, and casein to true protein ratio of 0.96. SP removal data from the lab-scale experiments were fitted into a mathematical model using DF and square of TMP as factors. The model predicts SP removal within 90-95% of actual SP removal got from the pilot plant experiments.

One of the typical forms of linear matrix expressions (linear matrix-valued functions) is given by $A + B_1X_1C_1 + \cdots + B_kX_kC_k$, where $X_1, \ldots, X_k$ are independent variable matrices of appropriate sizes, which include almost all matrices with unknown entries as its special cases. The domain of the matrix expression is defined to be all possible values of the matrix expressions with respect to $X_1, \ldots, X_k$. I this article, we approach some problems on the relationships between the domains of two linear matrix expressions by means of the block matrix method (BMM), the matrix rank method (MRM), and the matrix equation method (MEM). As application, we discuss some topics on the relationships among general solutions of some linear matrix equations and their reduced equations.

Sarcopenia becomes more common with age, being most prevalent among elderly individuals. According to the EWGSOP, muscle mass is one of the criteria for the evaluation of sarcopenia. The main methods for evaluating muscle mass are CT, MRI, and DXA, but these methods are difficult to apply in the field due to equipment costs, radioactivity, and lack of portability. BIVA and PhA are alternative approaches for assessing somatic cell mass and volume and do not require predictive equations. These variables are clinically relevant parameters that indicate cell health, especially cell membrane integrity and cell function. This study in sarcopenic and nonsarcopenic elderly volunteers aimed to determine the BIVA distribution pattern among individual sarcopenia patients; to evaluate the relationship between PhA and muscle strength, muscle quality, and physical function; and to find any correlates of PhA. The sample comprised 134 free-living elderly individuals of both sexes aged 69–91 years. Anthropometric parameters, grip strength, DXA findings, BIA results, and physical performance (the 6-meter walk test) were measured. Impedance vector distributions were evaluated in sarcopenia patients and healthy elderly individuals using BIVA. According to the AWGS criteria, sarcopenia was diagnosed according to DXA findings, grip strength and physical performance test results. Group differences were evaluated using the t test, Mann‒Whitney U test, and Hotelling's T2 test. Correlation analysis was performed to identify variables significantly associated with PhA. Linear regression analysis was performed to determine whether PhA was associated with muscle strength, muscle quality and physical function. BIVA detected a significant difference between the sarcopenia and non-sarcopenia groups (both sexes) due to higher R/H values and lower phase angles in a few individuals, whereas Xc/Ht values did not differ between the two groups. The sarcopenia group had a significantly lower PhA than the non-sarcopenia group among both males (p&lt;0.01) and females (p&lt;0.05). PhA was significantly correlated with age, ASM, HGS, and muscle quality in both sexes and significantly correlated with ASM/Ht2 and physical performance in males. PhA was a significant indicator of muscle strength in both males (β = 2.6; p&lt;0.01) and females (β = 3.4; p&lt;0.01), a significant indicator of muscle quality in both males (β = 0.07; p&lt;0.05) and females (β = 0.17; p&lt;0.01), and a significant indicator of physical performance in males (β = 0.3; p&lt;0.01). BIVA can detect changes in muscle mass in individuals with sarcopenia and is a practical method for the assessment of sarcopenia in the field. PhA is a good indicator of muscle strength, muscle quality and physical performance (in males). These methods can help diagnose sarcopenia in elderly individuals with reduced mobility.

Infection with Severe Acute Respiratory Syndrome coronavirus 2 (SARS-CoV-2) causes Coronavirus Disease 2019 (COVID-19), which has reached pandemic proportions. A number of effective vaccines have been produced, including mRNA vaccines and viral vector vaccines, which are now being implemented on a large scale in order to control the pandemic. The mRNA vaccines are composed of the Spike S1 protein encoding mRNA, incorporated in a lipid nanoparticle, stabilized by polyethylene glycol (PEG). mRNA vaccines are novel in many respects, including cellular uptake, the intracellular routing, processing, and secretion of the viral protein. Viral vector vaccines have incorporated DNA sequences encoding the SARS-CoV-2 Spike S1 protein into (attenuated) adenoviruses. The antigen presentation routes in MHC class I and class II, in relation to induction of virus neutralizing antibodies and cytotoxic T-lymphocytes will be reviewed. In rare cases, mRNA vaccines induce unwanted immune mediated side effects. mRNA based vaccines may lead to an anaphylactic reaction. This reaction may be triggered by PEG. The intracellular routing of PEG, and potential presentation in the context of CD1 will be discussed. Adenovirus vector based vaccines have been associated with thrombocytopenic thrombosis events. The anti-platelet factor 4 antibodies found in these patients could be generated due to conformational changes of relevant epitopes presented to the immune system.

Atmospheric Motion Vectors (AMVs) calculated by six different institutions (Brazil Center for Weather Prediction and Climate Studies/CPTEC/INPE, European Organization for the Exploitation of Meteorological Satellites/EUMETSAT, Japan Meteorological Agency/JMA, Korea Meteorological Administration/KMA, Unites States National Oceanic and Atmospheric Administration/NOAA and the Satellite Application Facility on Support to Nowcasting/NWCSAF) with JMA’s Himawari-8 satellite data and other common input data are here compared. The comparison is based on two different AMV input datasets, calculated with two different image triplets for 21 July 2016, and the use of a prescribed and a specific configuration. The main results of the study are summarized as follows: (1) the differences in the AMV datasets depend very much on the “AMV height assignment” used and much less on the use of a prescribed or specific configuration; (2) the use of the “Common Quality Indicator (CQI)” has a quantified skill in filtering collocated AMVs for an improved statistical agreement between centers; (3) JMA AMV algorithm has the best overall performance considering all validation metrics, most likely due to its height assignment: “optimal estimation using observed radiance and NWP wind vertical profile”.

Buckling defect will appear on the outer surface of the deformed ring during constrained ring rolling (CRR) of aluminum alloy thin wall conical ring with inner high ribs (AATWCRIHR), if the geometrical dimension of the ribs doesn't match the wall thickness. To avoid the buckling defect, a quantitative method for characterizing the degree of the buckling defect is proposed using the area of buckling profile. Then an orthogonal experimental scheme was designed taking the width of the middle rib, thickness of wall, and height of the middle rib as design variables and defining the area of buckling profile as optimization objective. Subsequently, a quadratic polynomial response surface model was established by combining the optimization algorithm with the finite element method (FEM), and the geometrical dimension of the middle ribs of the deformed AATWCRIHR is optimized. Also the optimal parameter combination to minimize the area of buckling profile is obtained and verified using FE simulation. Results show that the AATWCRIHR after optimization doesn’t generate the buckling defect during constrained ring rolling, and it is proved that the quantitative buckling defect representation method and the optimization design method based on the response surface model and the finite element simulation results are feasible for the constrained ring rolling process of the AATWCRIHR.