AISI 1050 steel circular pocket milling under minimum quantity lubrication (MQL) surroundings including nozzle elevation angle, lubricant flow rate, air pressure and cutting speed was studied. The machined surface quality (Ra) was evaluated for Up-milling side and Down-milling side. In this study, to obtain an manifest explanation on the pivotal effective parameters of MQL surroundings and cutting speed on the machined surface quality (Ra) through analyzing Taguchi L9 (34-2) approach and ANOVA calculation to identify those parameters, by utilizing the experimental outcomes to interpret three-dimensional (3D) surface plots and the diagrams of Signal-to-Noise ratios and major impact plots of Mean. The obtained outcomes of optimal operating parameters indicated that the pivotal effective parameters of MQL surroundings are nozzle elevation angle and lubricant flow rate on the machined surface quality. Simultaneously, a quadratic mathematical paradigm generated by using response surface design (RSD) and desirableness function evaluation were utilized to forecast the optimal values of the machined surface quality compared to Taguchi method. The results unveiled that the optimal values of the machined surface quality are adjacent to experimental attained values. The machined surface quality has been significantly improved using MQL surroundings.

This study explores the current landscape of social value (SV) research in the construction industry, analyzing global trends and identifying future research directions. Using bibliometric analysis, research published in Elsevier Scopus database from 2013 to 2023 was extracted using the keywords "social value" AND "construction industry." Results indicate a focus on social value indicators, socioeconomic impacts, project management, innovative practices, and cross-sector collaborations. The study also reveals a lack of attention to SV in African countries' construction sectors. By highlighting research areas and identifying gaps, this study contributes to academic literature, suggesting the need for guidelines, particularly in developing countries, and advocating for further research on SV in the built environment and strategies for global social value creation.

Studies have demonstrated the critical role that safety plays in preserving favourable working conditions in the construction industry, which is necessary to accomplish goals. The aim of this research was to inform stakeholders in the construction industry in developing nations about the value of safety and possible strategies for influencing their opinions regarding safety protocols. The importance of safety to the construction sector, which is crucial to the advancement of the country, has also been emphasized. However, due to a lack of adequate safety understanding among stakeholders in the construction sector, the construction industry is characterized by a great deal of instability and hazard. To determine what factors, affect productive working conditions in the construction production, this study examined safety. A conceptual framework for safe working conditions in the construction sector was developed by considering several aspects, including the person dimension, environment factor, safety behaviour, organization features, technology, and incentives. It is now imperative to bring in these dimensions to improve the safe working conditions in the construction industry, particularly in the developing countries. By putting these safety factors into practice, the construction industry can reduce safety risks, lower the number of accidents and fatalities, cut expenses related to subpar safety performance, safeguard the reputation of construction companies, boost employee morale and satisfaction with their work, enhanced employee retention, reduced absenteeism, and enhanced sustainability goals. Additionally, the proposed conceptual framework is assured to be new and to be widely accepted in the developing nations. Based on this assumption the conceptual framework is designed.

Cartilage degeneration is a characteristic of osteoarthritis (OA) which is often observed in aging populations. This degeneration is due to the breakdown of articular cartilage (AC) mechanical and tribological properties, primarily attributed to lubrication failure. Understanding the reasons behind these failures and identifying potential solutions could have significant economic and societal implications, ultimately enhancing the quality of life. This review provides an overview of developments in the field of AC, focusing on its mechanical and tribological properties. The emphasis is on the role of lubrication in degraded AC, offering insights into its structure and function relationship. Further it explores the fundamental connection between AC mechano-tribological properties and the advancement of its degradation and puts forth recommendations for strategies to boost its lubrication efficiency.

Efficiency improvement is the new challenge in all fields of design. In this scenario the reduction of power losses is becoming more and more a main concern also in the design of power transmissions. Appropriate models to predict power losses are therefore from the earliest stages of the design phase. The aim of the project is to carry on lubrication simulations of several variants of a cylindrical-roller-bearing to understand the lubricant distribution and the related churning power losses. Several strategies to reduce the computational effort have been used. Among them the sectorial symmetry and three innovative meshing strategies (purely analytical with and without interfaces and analytical/subtractive) that have been implemented in the OpenFOAM® environment. The results of the different approaches were compared among them and with experimental observations showing good agreement and reasonable savings in terms of computational effort.

As overeating, overweight and obesity remain public health concerns, it is crucial to design satiety-enhancing foods that suppress appetite and lower snack intake. Existing research identifies oro-sensory targets to promote satiation and satiety within the “satiety cascade” yet it remains unclear as to whether it is ‘chewing’ or ‘oral lubrication’ that might amplify satiation signals.Here we have combined techniques from experimental psychology, food material science and mechanical engineering to measure the role of chewing and lubrication using novel, model foods as preloads on subjective appetite and intake of a salty snack. Three mint flavoured hydrogels were engineered to vary in their texture (fracture stress) and lubrication (inverse of friction coefficient) properties, and a control group received a mint tea. Results showed that snack intake was suppressed by 32% after eating the low chewing/high lubricating preload as compared to the high chewing/low lubricating preload (p<0.05). No other significant effects were found for snack intake. Hunger ratings decreased from t1 to t3 (p<0.05), however differences between conditions were subtle and not significant. Thus, this proof-of-concept study demonstrates that manipulating oral lubrication is a promising new construct to reduce snack intake that merits future research in the oro-sensory satiety domain.

Minimum Inhibitory Concentration (MIC) measures the lowest concentration of antibiotic that inhibits in-vitro growth of microorganisms. Canine pyometra is a frequently occurring reproductive disorder where reliable antibiotics along with surgical excision of uterus predicts better prognosis. Scarce literature is available to facilitate proper antibiotic selection to avoid septicemia in clinical cases. The present study was conducted to determine sensitivity and potency of selected antibacterials based on MIC values against bacterial isolates obtained from Canine Pyometra in Kathmandu district, Nepal by Agar Dilution method. Isolates obtained from 63 intra-uterine samples after ovariohysterectomy were Enterococcus spp (n=41), Klebsiella spp. (n=7), Staphylococcus spp. (n=11) and Streptococcus spp. (n=4). Enrofloxacin and Amikacin were found highly sensitive (0% resistance) with a null hypothesis of resistance to all bacterial isolates and were significantly more potent than other antibacterials tested (p<0.05; Kruskal-Wallis test) based on lower MIC ranks. Similarly, ceftriaxone was found to be least potent and was highly resistant to Enterococcus spp. (75.61%) and completely resistant to other bacterial species tested (100%). Comparative results on sensitivity and potency in the study revealed Enrofloxacin and Amikacin to be better antibacterial of choice in pyometra innervation in in-vitro setting. Further clinical trials considering other equally important variables along with MIC should be conducted to predict actual clinical efficacy of antibacterials during therapeutic management of canine pyometra in Nepal.

In this study, the literature on varnish contamination is investigated among the various con-taminations of lubricant. As the period of use of lubricant increases, the lubricant deteriorates and becomes contaminated. The varnish causes filter plugging, sticking of hydraulic valves and fuel injection pumps, obstruction of flow, reduction of clearance, poor heater and cooler perfor-mance, and increase of friction and wear in various lubrication systems. These problems also cause mechanical system failure, performance degradation, and increased maintenance and re-pair cost. To improve the problems causes by the varnish, an adequate understanding of varnish is required. Therefore, in this literature review, definitions and characteristics, generating ma-chinery, generating mechanisms, causes, measurement methods, and prevention or removal methods are summarized. Most of the data are reports of companies related to lubricant and machine maintenance, and are included in some papers. We hope that this summary of varnish will be helpful to those who are engaged in reducing or preventing varnish problems.

Poly-ether-ether ketone (PEEK) is a great potential thermoplastic in industry and medical treatment and health. In this work, the PEEK/GO and PEEK/MoS2 composites were prepared by a novel hot isostatic pressing method. The addition of GO alters the tribological behaviours mechanism, fatigue wear mechanism is predominant to PEEK/GO composites. However, the combination of abrasive and adhesive wear mechanisms is observed for PEEK/MoS2 composites and PEEK. The reason is the hardness and tensile strength of composites are increased with the appropriate addition of GO. The response time to stable friction state of PEEK/GO and PEEK/MoS2 composites reduces in compared with PEEK, which conduce to shorten running-in time, reduce energy consumption and improve the tribological performances of composites. The addition of GO and MoS2 can effectively decrease the friction coefficient and wear rate, and the optimal content of GO and MoS2 was 0.7 wt.% and 15 wt.%, respectively. The results indicate that PEEK/GO and PEEK/MoS2 are impressive composites that possess super tribological properties.

One route to reducing CO2 emissions is to improve the energy efficiency of machines. For example, conventional combustion engines are being downsized (and down-speeded), are now running on lower viscosity engine lubricants (such as SAE 0W-20 or lower viscosity grades) and often also have stop-start systems fitted (to prevent engine idling when the vehicle is stopped). Some of these changes result in higher levels of mixed and boundary friction, and so accurate estimation of mixed/boundary friction losses is becoming of increased importance, both for estimating friction losses, and also for estimating wear volumes. Traditional approaches to estimating mixed/boundary friction, which employ real area of contact modelling such as the Greenwood-Tripp model [1] are widely used, but recent experimental data suggests that these approaches underestimate mixed/boundary friction losses [2-5]. A new model has been developed, based on experimental data, which estimates the proportion of mixed/boundary lubrication, X, as a function of the value (where is the ratio of the oil film thickness separating the surfaces to the combined root mean square surface roughness of the interface surfaces). The precise equation that describes the way in which X varies with takes the form of a “reverse S-curve”, which makes physical sense since S-curves arise naturally in growth processes, and in mixed/boundary lubrication, the real area of contact of rough surfaces grows as the load (and 1/) increases. Numerical estimates of mixed/boundary lubrication losses in internal combustion engines are presented here and compared with published data [2,6]. In addition, the improved method described here is used to estimate both the financial cost of mixed/boundary lubrication for today’s passenger car fleet, and the CO2 emissions associated with these friction losses.

In this note we study the computation of the minimum polynomial of a matrix $A$ and how we can use it for the computation of the matrix $A^n$. We also describe the form of the elements of the matrix $A^{-n}$ and we will see that it is closely related with the computation of the Drazin generalized inverse of $A$. Next we study the computation of the exponential matrix and finally we give a simple proof of the Leverrier - Faddeev algorithm for the computation of the characteristic polynomial.

Water scarcity is a significant challenge facing Jordan today. It is a challenge in all areas that use water, and it has become certain that water is the critical factor in the population/resources equation. The water resources in Jordan have become limited with the noticeable increase in the population, mostly resulting from forced migrations in neighboring countries because of the wars and until our time. The rising natural population growth rate, along with the massive influx of refugees, has turned into a state of disproportion between the daily consumption of the population and the amount of water available. That Jordan shares most of its surface water resources with neighboring countries has exacerbated the situation. The current use of water already exceeds its renewable supply. Excessive withdrawal from aquifers, which leads to a lowering of the water table and deterioration in water quality, covered the deficit. This paper focuses on assessing the water situation in Jordan, mainly evaluating this problem and the solution being considered, the true basis for a sustainable water solution requires awareness by the population, and several governmental and non-governmental organizations are actively involved in educating residents about water shortages. The most important and 'actionable' elements of comprehensive water solutions are discussed in this paper, and these elements exist, develop extra water supplies, water harvesting, water desalination, proper wastewater reuse in the agricultural sector, and reduce the demand for drinking water. This research provides specific recommendations to address the shortage of water resources in the Kingdom and highlights the importance of water conservation and optimal use.

The increase in the frequency of droughts in Africa has increased the interest in crops with drought escape mechanisms like grain Amaranth (Amaranthus hypochondriacus). However, the white-seeded grain Amaranth is easily cross-pollinated by its black seeded wild relatives such as smooth pigweed (Amaranthus hybridus). A study to investigate a minimum isolation distance enough to prevent seed contamination study was carried out at three sites namely Gweru and Bindura (2020/2021 rainy season) and Shamva (2021/2022 rainy season). Smooth pigweed was planted at distances of 3 to 150 m from pure grain Amaranth. Close monitoring of phenology and measurement of meteorological conditions such as temperature, wind speed and direction were done during the anthesis period. Cross-pollination in grain Amaranth was influenced by distance from the pollen source. A maximum of 12.9 % contamination rate was measured within the 10 m radius from the pollen donor plot and a minimum outcrossing rate of 0.45 % was recorded at the widest distance of 150 m. It can be concluded that complete removal of wild relatives of grain Amaranth is important within the field at as far as 150 m from the crop.

Objective. The present study examined the potential use of computed tomography panoramic mandibular indices on cone beam CT (CBCT) for the assessment of bone density in postmenopausal women with low bone mass. Study design. We enrolled 104 postmenopausal women who performed dual energy X-ray absorptiometry (DXA) using a DXA scanner and mental foramen region CBCT using NewTom VGi EVO Cone Beam 3D system. We assessed the relationship between DXA parameters: lumbar, femoral neck and total hip T score, bone mineral density (BMD), and lumbar trabecular bone score (TBS) and the panoramic mandibular indices: computed tomography mandibular index superior (CTI(S)), computed tomography mandibular index inferior (CTI(I)) and computed tomography mental index (CTMI). Results. We found important correlations between the CTI(I), CTI(S) and CTMI and bone mass, quantitative evaluated as BMD and T-score and also quality using TBS score. Conclusion. CBCT measured indices CTI(S), CTI(I), CTMI are useful in assessing patients with low bone mass.

We propose a quantum version of the well known minimum distance classification model called "Nearest Mean Classifier" (NMC). In this regard, we presented our first results in two previous works. In [34] a quantum counterpart of the NMC for two-dimensional problems was introduced, named "Quantum Nearest Mean Classifier" (QNMC), together with a possible generalization to arbitrary dimensions. In [33] we studied the n-dimensional problem into detail and we showed a new encoding for arbitrary n-feature vectors into density operators. In the present paper, another promising encoding of n-dimensional patterns into density operators is considered, suggested by recent debates on quantum machine learning. Further, we observe a significant property concerning the non-invariance by feature rescaling of our quantum classifier. This fact, which represents a meaningful difference between the NMC and the respective quantum version, allows to introduce a free parameter whose variation provides, in some cases, better classification results for the QNMC. The experimental section is devoted to: i) compare the NMC and QNMC performance on different datasets; ii) study the effects of the non-invariance under uniform rescaling for the QNMC.

This paper is the second part of a two-part report studying the responses of a typical point-contact elastohydrodynamic lubrication (EHL) problem to multiscale roughness that is mimicked by artificially generated waviness with different amplitudes, frequencies, and directions. The previous Part I paper (doi:10.3390/lubricants10120368) focuses on the full film regime, while the current paper focuses on the partial film regime. The amplitudes and frequencies are related to the feature geometry of smooth EHL problems. Generated waviness is input to a transient thermal EHL model. The simulation is conducted 1,600 times for different waviness parameters, loads, and speeds. Eight performance parameters are extracted: the asperity contact ratio, minimum film thickness, maximum pressure, central point film thickness, central point pressure, mean film thickness, coefficient of friction (COF), and the maximum temperature rise. The ratios of the first seven parameters with and without waviness and the asperity contact ratio values are plotted on the frequency–amplitude coordinate plane as contour maps. The influences of the amplitude, frequency, wave direction, load, and speed on the eight performance parameters are analyzed and summarized. The simulated data and plotted contour maps are provided to the readers in the Supplementary Material.

The present study provides molecular insight into the mechanisms underlying energy dissipation and lubrication of a smooth contact lubricated by an ionic liquid. We have performed normal and lateral force measurements with a surface forces apparatus and by colloidal probe atomic force microscopy on following model systems: 1-ethyl-3-methyl imidazolium bis-(trifluoro-methylsulfonyl)imide, in dry state and in equilibrium with ambient (humid) air; the surface was either bare mica or functionalized with a polymer brush. The velocity-dependence of the friction force reveals two different regimes of lubrication, boundary-film lubrication, with distinct characteristics for each model system, and fluid-film lubrication above a transition velocity V*. The underlying mechanisms of energy dissipation are evaluated with molecular models for stress-activated slip and flow, respectively. The stress-activated slip assumes that two boundary layers (composed of ions/water strongly adsorbed to the surface) slide pass each; the bond dynamics and the strength of the interaction at the slip plane dictate the change in friction -decreasing, increasing or remaining constant- with velocity in the boundary-film lubrication regime. Above a transition velocity V*, friction monotonically increases with velocity in the three model systems. Here, layers of ions slide past each (“flow”) under a shear stress and friction depends on a shear-activation volume that is significantly affected by confinement. The proposed friction model provides a molecular perspective of the lubrication of smooth contacts by ionic liquids and allows identifying the physical parameters that control friction.

This research aims to explore and analyze the critical success factors (CSFs) that increase the likelihood of successful implementation of tourism PPP projects in China. As an important step toward developing such a protocol, this study identifies and examines 22 critical success factors for tourism PPPs based on a systematic research approach, which includes a rigorous literature review, and semi-structured interviews. A questionnaire survey was conducted to evaluate the relative importance of these 22 CSF. The results show that the top three critical success factors for China’s tourism PPPs are: adequate project evaluation and demonstration; political support and stability; clear and stable policy documents on PPP. Factor analysis indicated that the 22 CSFs could be grouped into five principal success factor groups. These insights are expected to profoundly influence the development of policies related to tourism PPPs, providing a structured framework to enhance the efficiency and success of these ventures.

China is experiencing rapid urbanization. The focus on health issues has shifted from the treatment of diseases to passive or active prevention. Diseases caused by the deterioration of the urban environment, such as cardiovascular disease, diabetes, obesity and other chronic diseases and mental illness, have gradually become the main threat to public health. Studies have confirmed that urban green spaces (UGS) can help residents relieve mental stress, improve mood, reduce mental fatigue and restore attention, which has a positive effect on people's physical and mental health. In this study, the relationship between the quantity and quality factors of UGS and the physical and mental health of urban residents in Xihu District of Hangzhou is examined, and on this basis, UGS design strategies are proposed to promote the physical and mental health of residents. This study is of great significance for the future construction of UGS that are beneficial to the health of residents and the promotion of a healthy China and healthy city construction.

The Randić index of a graph G is the sum of (dG(u)dG(v))−1/2 over all edges uv of G, where dG(u) denotes the degree of vertex u in G. In this paper, we investigate a few graph transformations that decrease Randić index of graph. By applying those transformations, we determine the minimum Randić index on tricyclic graphs, and characterize the corresponding extremal graphs.

While texturing of workpiece surfaces to promote lubrication in metal forming has been applied for several decades tool surface texturing is rather new. In the present paper tool texturing is studied as a method to prevent galling. Adopting a strip reduction test longitudinal pocket geometries oriented perpendicular to the sliding direction, with shallow pocket depth, small pocket angle to the workpiece surface and varying distance between pockets are investigated. The experiments reveal that the distance between pockets should be larger than the pocket width thereby creating a topography similar to flat table mountains to avoid mechanical interlocking in the valleys; otherwise an increase in drawing load and pick-up on the tools is observed. The textured tool surface lowers friction and improves lubrication performance provided that the distance between pockets is 2-4 times larger than the pocket width. Larger drawing speed facilitates escape of the entrapped lubricant in the pockets. Testing with low to medium viscosity oils leads to a low sheet roughness on the plateaus but also local workpiece material pick-up on the tool plateaus. Large lubricant viscosity results in higher sheet plateau roughness but also prevents pick-up and galling.

This study assessed the hydrological performance and runoff water quality of 12 green roof (GR) modular systems located at the Universidad de los Andes campus (Bogotá, Colombia). Based on 223 rainfall events spanning a 3-year period, average rainfall retention was 85% (SD = 25%). T-tests, Welch Test, multiple linear regressions and correlation analysis were performed in order to assess the potential effect of air temperature, substrate type, vegetation cover, relative humidity, antecedent dry weather period (ADWP), rainfall duration and rainfall maximum intensity. In some cases, GR design variables (i.e. growing media and type of vegetation) were found to be significant for describing rainfall retention efficiencies and, depending on the GR type, some hydrological variables were also correlated with the rainfall retention. Rainfall and GR runoff were monitored for Total Kjeldahl Nitrogen (TKN), Nitrates, Nitrites, Ammonia, Total Phosphorus (TP), Phosphates, pH, Total Dissolved Solids (TDS), Total Suspended Solids (TSS), Color, Turbidity, Biological Oxygen Demand (BOD), Chemical Oxygen Demand (COD), Total Coliforms, metals and Poliaromatic Hydrocarbons (PAHs). The results obtained confirmed that GR systems have the ability to neutralize pH, but are source of the rest of the aforementioned parameters, excluding PAHs (with concentrations below detection limits), Ammonia, TSS, Se and Li, where differences with reference values (rainfall and plastic panel runoff) were not statistically significant. Substrate type, event size and rainfall regime are relevant variables for explaining runoff water quality.

Despite the increasing popularity of liquid chromatography-mass spectrometry (LC-MS)-based lipidomics, there is a lack of accepted and validated method for lipid extract quality and quantity assessment prior to LC-MS. Fourier-Transform Infrared Spectroscopy (FTIR) has been reported for quantification of pure lipids, however, the sample complexity and purity complex lipid extract quantification in lipidomics experiments could be impact quantification accuracy. Here, we report comprehensive assessment of the sample matrix on the accuracy of lipid quantification using Attenuated Total Reflectance Fourier-Transform Infrared Spectroscopy (ATR-FTIR). Pure lipids are characterized by CH-and C=O-stretching vibrations on FTIR, with quantitative range of 40–3000 ng and a limit of detection of 12 ng. Sample extraction method and local baseline subtraction during FTIR spectral processing significantly impact lipid quantification by CH-stretching. To facilitate sample quality screening, we developed the Lipid Quality (LiQ) score from a spectral library of common contaminants, using a ratio of peak heights between CH-stretching vibrations maxima and the collective vibrations from amide/amine, CH-stretching minima and sugar moieties. We evaluated LiQ score as a rapid sample quality control method by comparing to total LC-MS intensity of targeted lipidomics of 107 human plasma lipid extracts. Exclusion of poor-quality samples based on LiQ score improved the correlation between FTIR and LC-MS quantification. Finally, the uncertainty of absolute quantification by FTIR was estimated using a 795 ng SPLASH LipidoMix standard to be &lt;10%. In summary, this study identified key parameters for accurate FTIR-based quantification of complex lipid mixture, and developed a rapid workflow requiring only 1 µL of MS-ready sample and &lt; 5 minutes for routine lipidomics sample quality and quantity assessment.

We investigate the power of time series analysis based on a variety of information-theoretic approaches from statistics (AIC, BIC) and machine learning (Minimum Message Length) - and we then compare their efficacy with traditional time series model and with hybrids involving deep learning. More specifically, we develop AIC, BIC and Minimum Message Length (MML) ARMA (autoregressive moving average) time series models - with this Bayesian information-theoretic MML ARMA modelling already being new work. We then study deep learning based algorithms in time series forecasting, using Long Short Term Memory (LSTM), and we then combine this with the ARMA modelling to produce a hybrid ARMA-LSTM prediction. Part of the purpose of the use of LSTM is to seek capture any hidden information in the residuals left from the traditional ARMA model. We show that MML not only outperforms earlier statistical approaches to ARMA modelling, but we further show that the hybrid MML ARMA-LSTM models outperform both ARMA models and LSTM models.

The German wine sector has encountered new challenges in water management recently. To manage water resources responsibly, it is necessary to understand the relationship between the input of water and the output of wine, in terms of quantity and quality. The objectives of this study are to examine water use at the farm scale at three German wineries, and to develop and apply, for the first time, a quality-based indicator. Water use is analyzed in terms of wine production and wine-making over three years. After the spatial and temporal boundaries of the wineries and the water flows are defined, the farm water productivity indicator is calculated to assess water use at the winery scale. Farm water productivity is calculated using the AgroHyd Farmmodel modeling software. Average productivity on a quantity basis is 3.91 L wine per m3 of water. Productivity on a quality basis is 329.24 °Oechsle per m3 of water. Water input from transpiration for wine production accounts for 99.4–99.7% of total water input in the wineries, and, because irrigation is not used, precipitation is the sole source of transpired water. Future studies should use both quality-based and mass-based indicators of productivity.

This article discuss the effects of heat treatment and lubrication modes on the machinability of an A356 alloy (Al-Si-Mg); the alloy is studied as-received, with solution heat-treated alloy (SHT) as well as with an alloy that is solution heat-treated and then aged at 155, 180 and 220 °C. In the course of machinability evaluation, several criteria including cutting force, surface roughness, tool wears and burr analysis (chip) were studied. The results and analysis in this work indicated that the selected machinability criteria are important and necessary to effectively evaluate the machinability of A356 alloys. The machinability of both materials and tools were estimated in terms of cutting force, chip thickness ratio and burr formation, flank wear and roughness. The effects of different cutting parameters (cutting speed and feed rate) and lubrication modes (dry, mist and wet) on the machinability of the A356 cast alloy were also examined. The influence of heat treatments on the burr formation and surface quality was clearly revealed by the experimental results. Experimental work revealed that cutting forces were influenced significantly by aging and cutting speed. However, the different aging at 155, 180, and 220 °C and the cutting speed significantly affected the machinability of the A356 cast alloy. The results obtained show that a better drilling performance in terms of surface quality occurs at a high feed rate, with dry drilling and artificial aging at T6.

Background: Bayesian Network (BN) modeling is a prominent methodology in computational systems biology. However, the incommensurability of datasets fre- quently encountered in life science domains gives rise to contextual dependence and numerical irregularities in the behavior of model selection criteria (such as MDL, Minimum Description Length) used in BN reconstruction. This renders model features, first and foremost dependency strengths, incomparable and diffi- cult to interpret. In this study, we derive and evaluate a model selection principle that addresses these problems. Results: The objective of the study is attained by (i) approaching model eval- uation as a classification problem, (ii) estimating the effect that sampling error has on the satisfiability of conditional independence criterion, as reflected by Mutual Information, and (iii) utilizing this error estimate to penalize uncertainty with the novel Minimum Uncertainty (MU) model selection principle. We vali- date our findings numerically and demonstrate the performance advantages of the MU criterion. Finally, we illustrate the advantages of the new model evaluation framework on real data examples. Conclusions: The new BN model selection principle successfully overcomes per- formance irregularities observed with MDL, offers a superior average convergence rate in BN reconstruction, and improves the interpretability and universality of resulting BNs, thus enabling direct inter-BN comparisons and evaluations.

Abstract: The aim of this study was to compare the influence of corporate board characteristics on the extent of environmental disclosure quantity of listed firms in two leading emerging economies in Africa, South Africa (integrated reporting framework) and Nigeria (traditional reporting framework). Methods: The sample was comprised of 303 firms including environmentally sensitive companies purposively selected for content analysis study in South Africa (213) and Nigeria (90). We used both descriptive, multivariate and regression models to comparatively analyze the differences about corporate board characteristics as determinants of the extent of their environmental disclosure quantity. Results: The results reveal a more significant positive association between board characteristics and environmental disclosure in South Africa and less relevant association in Nigeria. Also, the results support that board independence arrangement may serve as bonding mechanisms in weak reporting environments, suggesting a substitutive relationship between board independence and the regulatory framework. Quiet revealing a board with environmental committee show a higher tendency to be ecologic transparent in both countries. However, in a traditional reporting framework, the environmental committee is not enough; its effect was insignificant and highly significant in the integrated reporting framework. Further revealed is the significant positive effect of industry membership influence on environmental disclosure. In all estimated models of South Africa sample show that 45% of environmentally sensitive industries significantly influence environmental disclosure, while 51% is environmentally polluting industries in Nigeria show less concern on environmental disclosure. Interestingly, Audit firm size (Big4) positively and statistically significantly associated with overall environmental reporting in both countries. The results are consistent with stakeholder theory, agency theory, institutional and legitimacy theory suggesting that a strong board size, independent members of the board with auditing experience, the active environmental committee in conjunction with solid audit reputation may reduce information asymmetry. Our findings will be helpful for policymakers and other regulators who are interested in environmental impact reporting.

The textile processing sector is accountable for the extensive utilisation and pollution of freshwater resources. Due to heightened consumer awareness of environmental legislation regarding freshwater contamination, the textile sector is compelled to review and improve their current water consumption practices. Foan dyeing technique is a highly promising alternative that has the ability to contribute to a more sustainable future. This review paper discussed the current state of foam dyeing technology, highlighting its advantages in terms of re-duced consumption of water and energy, as well as minimal usage of dyes and chemicals compared to conventional methods. The foam configuration allows for more effective application of dyes. As a result, there is a decrease in dye consumption and a reduction in processing time. The process is environmen-tally sustainable since it significantly reduces water pollution. Furthermore, foam dyeing method consumes less energy due to its lower dying temperature need compared to conventional processing technology. Additionally, this paper highlights the continued investigation of foam dyeing on many types of textile substrates (such as fibres, yarns, and fabric) and compositions including cotton, polyester, and their mixtures. In addition, the techno-economic comparison of foam dyeing and conventional dyeing is also given. This review paper addi-tionally endorses the Sustainable Development Goals (SDG 6, clean water and sanitation) by examining the preservation of usable water and the decrease in wastewater discharge through foam dyeing technology. Lastly, the potential advantages of foam dyeing in terms of significantly reducing water consump-tion and the generation of waste in the textile industry were also addressed.

Hot rolling tests of a low-alloy steel were conducted at a rolling temperature of 850 ℃ under different lubrication conditions, including benchmarks (dry condition and water) and water-based nanolubricants containing different concentrations of nano-TiO₂ from 1.0 to 8.0 wt%. The effects of nanolubricants on rolling force, surface roughness, thickness of oxide scale and microstructure were systematically investigated through varying nano-TiO₂ concentrations. The results show that the application of nanolubricants can decrease the rolling force, surface roughness and oxide scale thickness of rolled steels, and refine ferrite grains. In particular, the nanolubricant containing an optimal concentration (4.0 wt%) of nano-TiO₂ demonstrates the best lubrication performance, owing to the synergistic effect of lubricating film, rolling, polishing and mending generated by nano-TiO₂.

Prediction of protein-ligand binding affinities is crucial for computational drug discovery. A number of deep learning approaches have been developed in recent years to improve the accuracy of such affinity prediction. While the predicting power of these systems have advanced to some degrees depending on the dataset used for model training and testing, the effects of the quality and quantity of the underlying data have not been thoroughly examined. In this study, we employed erroneous datasets and data subsets of different sizes, created from one of the largest databases of experimental binding affinities, to train and evaluate a deep learning system based on convolutional neural networks. Our results show that data quality and quantity do have significant impacts on the prediction performance of trained models. Depending on the variations in data quality and quantity, the performance discrepancies could be comparable to or even larger than those observed among different deep learning approaches. In particular, the presence of proteins during model training leads to a dramatic increase in prediction accuracy. This implies that continued accumulation of high-quality affinity data, especially for new protein targets, is indispensable for improving deep learning models to better predict protein-ligand binding affinities.

The issue of measurement reliability is certainly undervalued in the local agricultural marketplace organization. Besides, there was nothing identified concerning the extent of cereal commodity trade measurement cost. Hence, this paper aimed to estimate the magnitude of cereals trade quantity measurement cost caused by instrument error and unreliability; mainly by targeting the local marketplace in Ethiopia. The survey was conducted in six different districts’ marketplaces (n = 602) of Oromia region by employing administered structured questionnaires and site mass measurement calibration. The gathered data were analyzed using independent samples t-test, one sample t-test, and analysis of variance. According to the findings, the actual value measurement means of the quantity of most local units of the farmers were greater than small traders. The independent t-test result indicated that the average values of the quantity of the majority of units of measurement between farmers and small traders were varied significantly. Estimated measuring instruments’ error and unreliability associated average measurement cost of one-day market transaction over total cereals marketed amount were higher comparatively for a sack, bowl, and glass units. This study demonstrates that homogeneity in measurement, policy, and institutions that aid cereals trade would have an indispensable role to reduce measurement costs and ensure equitable exchange.

The development requirements for reusable liquid rocket engines have set higher standards for the reliability design of turbopump structures. To address the issue of bearing failure in turbopumps under harsh conditions such as low temperature, high speed, heavy load, and repeated start-stop cycles, this paper proposes replacing ball bearings with thrust foil bearings. We used liquid nitrogen instead of liquid hydrogen and liquid oxygen to simulate the ultralow temperature and low viscosity operating environment of turbopumps, evaluating the potential feasibility of using thrust foil bearings in this context. The numerical calculations primarily include the formulation of the foil deformation equations based on the link-spring model for the wavy foil and the thin plate finite element model for the top foil. These equations are solved by coupling the Reynolds lubrication equation, the fluid film thickness equation, and the foil deformation equations using the finite difference method, Newton-Raphson method, and finite element method. A detailed analysis is conducted on the effects of rotational speed, fluid film thickness, thrust disk inclination angle, and wavy foil interface friction coefficient on the static and dynamic characteristics of thrust foil bearings. The research findings provide guidance for the application of thrust foil bearings in liquid rocket turbopumps.

The thermal lubrication of an entangled polymeric liquid in wall-driven shear flows between parallel plates is investigated by using a multiscale hybrid method coupling molecular dynamics and the hydrodynamics (i.e., the synchronized molecular dynamics method). The temperature of the polymeric liquid rapidly increases due to viscous heating once the drive force exceeds a certain threshold value. The rheological properties of the polymeric liquid drastically change at around the critical drive force. In the weak viscous-heating regime, the conformation of polymer chains is dominated by the local shear flow so that the anisotropy of the bond orientation tensor grows as the drive force increases. However, in the large viscous-heating regime, the conformation dynamics is dominated by the thermal agitation of polymer chains so that the bond orientation tensor recovers more uniform and random structures as the drive force increases, even though the local shear flows are further enhanced. Remarkably, these counter-intuitive transitional behaviors give an interesting re-entrant transition in the stress--optical relation, where a linear formalism in the stress--optical relation approximately holds even though each of the macroscopic quantities behaves nonlinearly. The robustness of the linear stress--optical relation is also confirmed in the spatiotemporal evolution at the hydrodynamic level.

Minimum housing standards aim to safeguard housing rights and enhance residential conditions. Governments develop housing policies, including provision, preservation, and support for welfare programs, guided by the status of households below these standards. Growing nations commonly utilize this approach to decrease the proportion of households not meeting these criteria. In South Korea, the ratio of households below these standards was 4.5% in 2021, down from 16.6% in 2006, as indicated by the initial Korea Housing Survey. However, this downward trend has stalled over the past decade. With the 2004 and 2011 revisions, the standards have been effective for 12 years, yet no longer mirror current housing realities due to ongoing improvements. This study aimed to propose enhancements to Korea’s minimum housing standards. Through analyzing laws, prior research, present household statuses, international cases, and expert insights, recommendations emerged. Categorizing households by size, we developed precise standards covering area, facility, and location aspects. These new standards led to an 8.4% non-compliance rate in 2021. This research’s findings anticipate aiding the revision of minimum housing standards, formulating pragmatic policies for enhancing residential conditions in line with present situations.

Sparse recovery of fluid flows using data-driven proper orthogonal decomposition (POD) basis is systematically explored in this work. Fluid flows are manifestations of nonlinear multiscale PDE dynamical systems with inherent scale separation that impact the system dimensionality. Given that sparse reconstruction is inherently an ill-posed problem, the most successful approaches require the knowledge of the underlying basis space spanning the manifold in which the system resides. In this study, we employ an approach that learns basis from singular value decomposition (SVD) of training data to reconstruct sparsely sensed information. This results in a set of four control parameters for sparse recovery, namely, the choice of basis, system dimension required for sufficiently accurate reconstruction, sensor budget and their placement. The choice of control parameters implicitly determines the choice of algorithm as either $l_2$ minimization reconstruction or sparsity promoting $l_1$ norm minimization reconstruction. In this work, we systematically explore the implications of these control parameters on reconstruction accuracy so that practical recommendations can be identified. We observe that greedy-smart sensor placement provides the best balance of computational complexity and robust reconstruction for marginally oversampled cases which happens to be the most challenging regime in the explored parameter design space.

As one of the important components of underwater propulsion systems, water lubricated bearings are often failure due to mechanical wearing and vibrating, especially under high loads and prolonged friction. In this paper, a dual-network co-crosslinking strategy based on HNBR is proposed, in which the epoxy network connects with the rubber network through Epoxidized Eommia ulmoides gum. The damping, tribological and mechanical properties of the prepared composite are systematically investigated. The results show that this material has excellent friction and vibration damping properties, with a water-lubricated coefficient of friction as low as 0.022 and a wear resistance as high as 3.87 × 10-6mm3/Nm. Preparing HNBR-based composite by dual network co-crosslinked is proved being a feasible solution to improve the reliability and service life of water-lubricated bearings.

Titanium alloys are difficult to machine and have poor tribological properties. This paper investigates the lubricating performance of γ-Al2O3/ZnO hybrid nanofluids for Ti-6Al-4V. The pure and hybrid nanofluid are compared, and the effects of γ-Al2O3/ZnO ratios are studied. The results show that γ-Al2O3/ZnO hybrid nanofluids outperform pure nanofluid in terms of lower friction coefficients and better surface quality. Moreover, the hybrid nanofluid with a mass ratio of Al2O3 to ZnO of 2:1 demonstrates the best lubrication performance with a reduced friction coefficient of up to 22.1% compared to the base solution, resulting in improved surface quality. Al2O3 nanoparticles can adhere to the surface of ZnO nanoparticles and work as a coating, which further enhances the lubrication performance of the water-based nanofluid.

We present functionalization of AISI 316L surfaces by nanosecond Nd:YAG laser texturing in order to modify the surface morphology with crosshatch and dimple patterns. We performed tribological analysis under lubrication with sunflower and jojoba oil with and without addition of solid lubricant, MoS2 nanotubes. In connection to friction/wear response we analysed laser-textured surface wettability, oil spreadability and oil retention capacity. We have shown, that the crosshatch pattern generally exhibited lower friction than the dimples pattern, with the addition of MoS2 nanotubes not having any significant effect on the coefficient of friction under the investigated contact conditions. This was additionally with better oil spreadability and oil retention capacity results of crosshatch textured surface. Furthermore, texturing reduced wear of the stainless steel surfaces but led to approximately one order of magnitude larger wear rate of the steel counter-body, primarily due to the presence of hard bulges around the textured patterns. Overall, the crosshatch pattern showed better oil retention capacity and lower friction in combination with different vegetable oils, thus making it a promising choice for improving tribological performance in various environmentally friendly applications.

A short review of the important studies was conducted to evaluate the potential of aerosol transmission of the Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2). The minimum size of droplets potentially carrying the SARS-CoV-2 was newly estimated and discussed in this review.

The design of curved surface sliders (CSS) based on the elastic response spectrum is done by iteration to find the combination of friction coefficient and displacement capacity which satisfies the condition that the maximum horizontal CSS force is equal to the horizontal force of the structure. Although this CSS design is valid it does not necessarily minimize structural acceleration. This paper therefore describes the optimum CSS design for minimum structural acceleration. All valid CSS designs and the optimum CSS design are represented by their associated trajectory in the elastic response spectrum plane which visualizes the optimization problem. The results demonstrate that the optimum CSS design is not obtained at maximum tolerated effective damping ratio. The subsequent sensitivity analysis describes how much the structural acceleration increases if the actual friction coefficient of the real CSS deviates from its optimum design value. The analysis points out that the increase in structural acceleration is approximately one order of magnitude smaller than the deviation in friction. The sensitivity data may be used by structural engineer to determine tolerable deviations in friction coefficient which still results in acceptable structural accelerations.

We show that, as in the case of the principle of minimum action in classical and quantum mechanics, there exists an even more general principle in the very fundamental structure of quantum space-time: This is the principle of minimal group that allows to consistently and simultaneously obtain a natural description of the spacetime dynamics and the physical states admissible in it. The theoretical construction is based on the physical states that are average values of the generators of the Metaplectic group Mp(n) , the double covering of SL(2C) in a vector representation, with respect to the coherent states carrying the spin weight. Our main results here are: (i) There exists a connection between the dynamics given by the Metaplectic group symmetry generators and the physical states (mappings of the generators through bilinear combinations of the basic states). (ii) The ground states are coherent states of the Perelomov-Klauder type defined by the action of the Metaplectic group which divide the Hilbert space into even and odd states mutually orthogonal. They carry a spin weight 1/4 and 3/4 respectively from which, two other basic states can be formed. (iii) The physical states, mapped bilinearly with the basic 1/4 and 3/4 spin weight states, plus their symmetric and antisymmetric combinations, have spin contents s = 0, 1/2, 1, 3/2 and 2. (iv) The generators realized with the bosonic variables of the harmonic oscillator introduce a natural supersymmetry and a superspace whose line element is the geometrical Lagrangian of our model. (v) From the line element as operator level, a coherent physical state of spin 2 can be obtained and naturally related to the metric tensor. (vi) The metric tensor is naturally discretized by taking the discrete series given by the basic states (coherent states) in the n number representation, reaching the classical (continuous) space-time for n going to infinity. (vii) There emerges a relation between the eigenvalue of our coherent state metric solution and the black hole area (entropy) as A_{bh}/4 l_{p}^{2} = I alpha I relating the phase space of the metric found g_{ab} and the black hole area A_{bh} through the Planck length l_{p}^{2} and the eigenvalue I alpha I of the coherent states. As a consequence of the lowest level of the quantum discrete space-time spectrum, eg the ground state associated to n = 0 and its characteristic length, there exists a minimum entropy related to the black hole history.

The minimum dominating tree (MDT) problem consists of finding a minimum weight sub-graph from an undirected graph, such that each vertex not in this sub-graph is adjacent to at least one of the vertices in it, and the sub-graph is connected without any ring structures. This paper presents a Dual Neighborhoods Search (DNS) algorithm for solving the MDT problem, which integrates several distinguishing features, such as two neighborhoods collaboratively working for optimizing the objective function, a fast neighborhood evaluation method to boost the searching effectiveness, and several diversification techniques to help the searching process jump out of the local optimum trap thus obtaining better solutions. DNS improves the previous best-known results for 4 public benchmark instances while providing competitive results for the remaining ones. Several ingredients of DNS are investigated to demonstrate the importance of the proposed ideas and techniques.

Autofocus is an essential part of the SAR imaging process. Multi-subaperture autofocus algorithm is a commonly used autofocus algorithm for processing SAR stripmap mode data. The multi-subaperture autofocus algorithm has two main steps, the first is to estimate the phase error gradient within the subaperture, the second is to splice the phase error gradient, that is, to remove the shift amount between the estimated adjacent subapertures’ error gradients. Previous gradient-splicing algorithms assume that the estimation of subaperture error is accurate, but when the estimation of subaperture phase error gradients is not accurate enough, these algorithm performance will be degraded. A new phase error gradient splicing algorithm is proposed in this paper. It roughly estimates the shift amount first, and then finely estimates the shift amount based on the minimum-entropy criterion, which can improve the robustness of splicing especially when the estimation of the phase error gradients of the subaperture is not accurate enough. To speed up the algorithm, a variable-step-size search method is used. Simulation and experimental results show that the algorithm has enough accuracy and still has good performance when other splicing algorithms doesn’t perform well.

A large variety of molecular interactions occurs between biomolecular components in cells. When one or a cascade of molecular interactions results in a regulatory effect, by one component onto a downstream component, a so-called ‘causal interaction’ takes place. Causal interactions constitute the building blocks in our understanding of larger regulatory networks in cells. These causal interactions and the biological processes they enable (e.g., gene regulation) need to be described with a careful appreciation of molecular interactions that occur between entities. A proper description of this information enables archiving, sharing, and reuse by humans and for computational science. Various representations of causal relationships between biological components are currently used in a variety of resources. Here, we propose a checklist that accommodates current representations, and call it the Minimum Information about a Molecular Interaction CAusal STatement (MI2CAST). This checklist defines both the required core information, as well as a comprehensive set of other contextual details valuable to the end user and relevant for reusing and reproducing causal molecular interaction information. The MI2CAST checklist can be used as reporting guidelines when annotating and curating causal statements, while assuring uniformity and interoperability of the data across resources.

In this paper a robust version of the Wald test statistic for composite likelihood is considered by using the composite minimum density power divergence estimator instead of the composite maximum likelihood estimator. This new family of test statistics will be called Wald-type test statistics. The problem of testing a simple and a composite null hypothesis is considered and the robustness is studied on the basis of a simulation study. Previously, the composite minimum density power divergence estimator is introduced and its asymptotic properties are studied.

Sustainability in material purchasing is a growing area of research. Goods purchasing decisions strongly affect transportation path flows, vehicle consolidation, inventory levels and related obsolescence costs. Within a global sourcing context, companies experience the need of new decision making approaches capable to consider a large variety of factors, also linked with society and environment. Environmental impact assessment has become a key requirement for materials purchasing and transportation decisions since global warming is a rising concern both in academic and industrial researches. In fact, it is well known that the freight transport industry is responsible for large amounts of carbon emissions contributing to global warming. In this paper, we initially analyse and compare the environmental economic policies established by the International Governments in relation to the carbon trading systems adopted. Then, we develop a multi-objective lot sizing approach useful in practice to define the sustainable quantity to purchase when a Cap and Trade mitigation policy is present. We further analyse the model behaviour according to different carbon price values by demonstrating that carbon prices are still far too low to motivate managers towards sustainable purchasing choices.

In China, the majority of mountainous regions are characterized by complex topography and a delicate, sensitive geological environment. Coupled with a generally underdeveloped infrastruc-ture and numerous unreasonable human engineering activities, these regions are often highly susceptible to geological disasters. Geological hazards can cause significant damage to human lives and property, impeding the development of mountainous areas. Consequently, researching the assessment of geological hazard vulnerability is crucial for disaster prevention, emergency management, and economic development in these regions. This study focuses on Xuanwei City and selects eight factors for evaluation, including elevation, gradient, slope aspect, normalized vegetation index, stratigraphic lithology, distance from faults, distance from rivers, and distance from roads. These factors are chosen based on a comprehensive analysis of the spatial and tem-poral distribution of geological hazards and disaster incubation conditions. Two paired models, the deterministic coefficient model + logistic regression model (CF+LR) and the information quan-tity model + logistic regression model (I+LR), were employed to quantitatively assess the study ar-ea. The accuracy of these models was evaluated using ROC curves and AUC values. The results indicate that: (1) The AUC values for the CF+LR and I+LR coupled models are 0.799 and 0.772, respectively, demonstrating that both models can objectively and reliably assess the vulnerability to geological hazards in the study area; (2) Based on the CF+LR model calculations, the geological hazard susceptibility of Xuanwei City can be categorized into four zones: extremely high suscepti-bility (6.09%), high susceptibility (31.08%), medium susceptibility (32.26%), and low susceptibility (30.57%); (3) The CF+LR model more accurately represents the evaluation results and offers a strong reference value.

The present work is focused on the numerical solution of the complete energy equation used in fluid film lubrication. The work was motivated by the fact the complete energy equation has no analytic solution that could be used for validations. Its accuracy and computation time are related to the employed numerical method and to the grid resolution. The natural discretization method (NDM) applied on different grids is systematically compared with the spectral method (the Lobatto Point Colocation Method or LPCM) with different polynomial degrees. A one dimensional inclined slider is used for the numerical tests and the energy equation is artificially decoupled from Reynolds. This approach enables to focus all the attention on the numerical solution of the energy equation. The results show that the LPCM is one or two orders of magnitudes more efficient than the NDM in terms of computation time. The energy equation is then coupled with Reynolds equation in a thermo-hydrodynamic analysis of the same 1D slider; the numerical results confirm again the efficiency of the LPCM. A thermo-hydrodynamic analysis of a two-lobe journal bearing is then presented as a practical application.

Being one of the most critical phases of a flight, landing deserves specific attention, especially when the aircraft is subject to external disturbances such as wind. A notable concern associated with touchdown events, especially when crosswind is present is tire wear. This work is aimed first at developing a nonlinear flight simulator able to handle the entire landing maneuver in non-null wind conditions, considering the airborne phase, ground run, and the transition between them. Then, the simulator is included in an optimal process to define the landing technique associated with the minimum tire wear. The methodology is tested in a simulation environment with a realistic model of a reference aircraft, showing that a significant reduction of tire wear can be obtained by optimizing the sideslip angle at touchdown and the lateral-directional controls after the airplane touches the runway with both legs of the main landing gear.

The use of plant fibers as reinforcement in composites with the aim of totally or partially replacing synthetic fibers has received significant attention in the last years. However, one of the disadvantages of the use of these fibers in polymeric composites is associated to the fact that they are hydrophilic, resulting in poor adhesion with most matrices when in the presence of moisture. In addition, another problem encountered is the lower strength of this type of fiber and, as a solution to minimize these problems, the composite can be hybridized by adding layers of natural and synthetic fibers and the use of resin protection along the thickness of the composite. (Lateral protection) to reduce moisture absorption by the laminate. The objective of this work is to obtain composites formed by five layers of reinforcement and terephthalic polyester matrix, one of which is reinforced only with short glass fiber-E blanket, another reinforced only with jute fiber and a third hybrid containing the fibers. Two types of reinforcements with interlayer layers. Afterwards, the loss of mechanical properties was observed when these materials were immersed in distilled water, with and without lateral protection, until reaching saturation. We evaluated parameters such as the influence of configuration type and environmental conditions, such as the amount of water absorption. The obtained results show that the hybrid composite obtained a behavior close to the composite containing only fiberglass, and better than the one containing only jute fiber and that the absorption was smaller in the samples with side protection.

In GDI engine applications, high-pressure (H.P.) injectors typically require to be designed to be capable of rapid response for GDI engines in order to be driven in the rapid response with respect to magnetic actuators, allowing for example more precise air-fuel ratio control in the GDI engines. The H.P. fuel injector is a highly dynamic component requiring careful voltage and pressure input modulation to achieve the required fuel injection quantities of GDI engines. The accurate fuel injection curves are a key influence for this technology, therefore will require the estimation of the fuel flow rate to be realized. In this paper, a PIC microchip for programming injector drive circuits is implemented to improve the performance of a H.P. fuel injector and tested to verify its feasibility. In the proposed injector drive circuit, powers MOSFETs directly control the charging/discharging current by a dsPIC30F4011 microchip. Design and analysis of the proposed injector drive circuit are presented. Next, effects of total pulse width, injector supply voltage, fuel system pressure and PWM operation on fuel injection quantities of a H.P. fuel injector are measured. Also, the measured data of the H.P. fuel injector fed by the injector driving circuit are defined as the fuel injection curves. Finally experimental results are provided for verification of the proposed injector drive circuit.

The heat and matter transfer during glucose catabolism in living systems and their relation with entropy production are a challenging subject of the classical thermodynamics applied to biology. In this respect, an analogy between mechanics and thermodynamics has been performed via the definition of the entropy density acceleration expressed by the time derivative of the rate of entropy density and related to heat and matter transfer in minimum living systems. Cells are regarded as open thermodynamic systems that exchange heat and matter resulting from irreversible processes with the intercellular environment. Prigogine’s minimum energy dissipation principle is reformulated using the notion of entropy density acceleration applied to glucose catabolism. It is shown that, for out-of-equilibrium states, the calculated entropy density acceleration is finite and negative and approaches as a function of time a zero value at global thermodynamic equilibrium for heat and matter transfer independently of the cell type and the metabolic pathway. These results could be important for a deeper understanding of entropy generation and its correlation with heat transfer in cell biology with special regard to glucose catabolism representing the prototype of irreversible reactions and a crucial metabolic pathway in stem cells and cancer stem cells.

Laryngeal squamous cell carcinoma (SCC) is a head and neck cancer (about 5% of all cancers, and up to 95% of laryngeal cancers; more frequent in males than in females, ratio of 3.9/1) with characteristics depending on its location, with glottis, supraglottis, and subglottis being the most frequent. In African Americans, it appears at younger ages and has lower survival rates than in Caucasians, Hispanics, and Asians. Primary risk factors are tobacco and alcohol consumption. Treatments vary based on the site and stage of the tumor and include radiotherapy, transoral laser microsurgery, and surgery, including partial or total laryngectomy. This study aimed to map by immunohistochemistry four members of the Chaperone System (CS), namely Hsp10, Hsp27, Hsp60, and Hsp90, in laryngeal tissue during the progression from healthy stage to full malignancy, passing through dysplasia. The four chaperones increased in the tissues and changed distribution with the progression of carcinogenesis. The findings provide a histopathological platform for launching in-depth analyses of the mechanisms underpinning the role of the four chaperones in the development of squamous cell carcinoma of the larynx. Also, the data indicate that the four chaperones have potential as biomarkers for diagnosis, prognostication, and patient follow-up.

We propose two methods for obtaining estimations on the minimum distance and covering radius of orthogonal arrays. Both methods are based on knowledge about the (feasible) sets of distance distributions of orthogonal arrays with given length, cardinality, factors and strength. New bounds are presented either in analytic form and as products of an ongoing project for computation and investigation of the possible distance distributions of orthogonal arrays with parameters in doable ranges.

With the increasing of copper consumption, the in-use stock of copper tends to increase. This paper used the “average use life method” to quantify the amount of copper in-use stock, and calculated the average age of in-use stock. It was indicated that the total in-use stock had an overall smooth trends, and reached its peak in 2007 was about 68.9 Mt (million tons), in addition, in-use stock per capita reached its peak ,234 kg/capita in 2001. The results demonstrated that during the period 1992-2002, the average age of copper in-use stock was continually decreased, but gradually increased since the year 2003. The fixed assets depreciation method used in this paper is applied to analyze depreciated copper in-use stock, and to analyze the relationship with economic indicator (GDP). It is demonstrated that it was inconsistent with the theory of Environmental Kuznets Curve (EKC) before 2000, this might be the demand for copper in the service sector is greater than the reduced strength of alternatives. Finally, scenario analysis of future copper in-use stock and depreciated copper in-use stock per capita in the U.S. were presented. The corresponding average age of the in-use stock will have a slight rise in the next decade.

Partial Information Decompositions (PIDs) aim to categorize how a set of source variables provide information about a target variable redundantly, uniquely, or synergetically. The original proposal for such an analysis used a lattice-based approach and gained significant attention. However, finding a suitable underlying decomposition measure is still an open research question, even at an arbitrary number of discrete random variables. This work proposes a solution to this case with a non-negative PID that satisfies an inclusion-exclusion relation for any f-information measure. The decomposition is constructed from a pointwise perspective of the target variable to take advantage of the equivalence between the Blackwell and zonogon order in this setting. The zonogons correspond to the Neyman-Pearson region for an indicator variable of one target state and f-information is the expected value of quantifying its boundary. We prove that the decomposition satisfies the axioms of the original decomposition framework and guarantees non-negative partial information results. We highlight that our decomposition behaves differently depending on the used information measure, which can be utilized for different applications. We additionally show how our proposal can be used to obtain a non-negative decomposition of Rényi-information at a transformed inclusion-exclusion relation, and for tracing partial information flows through Markov chains.

Tripping is the largest cause of falls and low swing foot ground clearance during the mid-swing phase, particularly at the critical gait event known as Minimum Foot Clearance (MFC) is the major risk factor for tripping-related falls. Intervention strategies to increase MFC height can be effective if applied in real-time based on feed-forward prediction. The current study investigated the capability of machine learning models to classify the MFC into various categories using toe-off kinematics data. Specifically, three MFC sub-categories (less than 1.5cm, between 1.5-2.0cm and higher than 2.0cm) were predicted applying machine learning approaches. A total of 18,490 swing phase gait cycles’ data were extracted from six healthy young adults, each walking for 5-minutes at a constant speed of 4km/h on a motorised treadmill. Both K-Nearest Neighbour (KNN) and Random-Forest were utilised for prediction based on the data from toe-off for five consecutive frames (0.025s duration). Foot kinematics data were obtained from inertial measurement unit attached to the mid-foot, recording tri-axial linear accelerations and angular velocities of the local coordinate. KNN and Random-Forest achieved 84% and 86% accuracy, respectively, in classifying MFC into the three sub-categories with run time of 0.39 seconds and 13.98 seconds respectively. The KNN-based model was found to be more effective if incorporated into an active exoskeleton as the intelligent system to control MFC based on the preceding gait event, toe-off due to its quicker computation time. The machine learning based prediction model shows promise for the prediction of critical MFC data indicating higher tripping risk.

Despite the proposal of minimum reporting guidelines for metabolomics over a decade ago, reporting on the data analysis step in metabolomics studies has been shown to be unclear and incomplete. Major omissions and a lack of logical flow render the data analysis’ sections in metabolomics studies impossible to follow, and therefore replicate or even imitate. Here, we propose possible reasons why the original reporting guidelines have had poor adherence and present an approach to improve their uptake. We present in this paper an R markdown reporting template file that guides the production of text and generates workflow diagrams based on user input. This R Markdown template contains, as an example in this instance, a set of minimum information requirements specifically for the data pre-treatment and data analysis section of biomarker discovery metabolomics studies, (gleaned directly from the original proposed guidelines by Goodacre at al.). These minimum requirements are presented in the format of a questionnaire checklist in an R markdown template file. The R Markdown reporting template proposed here can be presented as a starting point to encourage the data analysis section of a metabolomics manuscript to have a more logical presentation and to contain enough information to be understandable and reusable. The idea is that these guidelines would be open to user feedback, modification and updating by the metabolomics community via GitHub.

Minimum miscibility pressure (MMP) and oil swelling are two important factors of carbondioxide (CO₂) gas displacement mechanism occurred in the reservoir relate to application of CO₂ injection in the field to enhance oil recovery. In this paper determination of minimum miscibility pressure (MMP) between crude oil samples with carbondioxide gas conducted using two methods, i.e. correlation methods and laboratory experiment using slimtube. While, determination of swelling factor was conducted using PVT cell, where recombined fluid injected and conditionally at the reservoir temperature. The results of MMP using empirical equation (2807 Psig) and Holm & Josendal correlation (2750 Psig) is more approximate to the result of laboratory analysis (2805 Psig). The result of swelling test during injection CO₂ gas processes until 46.82% mole, shows that bubble point pressure is increasing gradually from 410 psig through 2200 psig, and swelling factor was also increase from 1.0 through 1.442. Based on the value of fracture pressure of Layer F in the KHL Field is 2200 Psig and MMP is 2805 Psig, hence the application of CO₂ gas injection in the field only could be conducted as immiscible flooding.

Reduced nutrient mineralization rates under minimum tillage are usually compensated by mineral fertilizer application. These cannot be applied in organic farming systems, however. We hypothesized that organic minimum tillage based on frequent cover cropping and application of dead mulch will improve soil fertility and can compensate for the potential negative effects of minimum tillage. Two long-term field experiments were set up in 2010 and 2011 comparing plough versus minimum tillage including application of transferred mulch. As second factor, the application of compost versus mineral potassium and phosphorus was compared. In 2019, soils were analyzed for soil pH, organic carbon, macro-, micronutrients, microbial biomass, microbial activity and total nematode abundance. In addition, performance of pea in the same soils was determined under greenhouse conditions. Across both experiments, macronutrients (+52%), micronutrients (+11%), microbial biomass (+51%), microbial activity (+86%), and bacterivorous nematodes (+112%) increased in minimum tillage compared with the plough-based system. In the greenhouse, pea biomass was 45% higher in the soil that had been subjected to minimum tillage compared to the plough. In conclusion, soil fertility can be improved in organic minimum tillage systems by intensive cover cropping and application of dead mulch to levels higher than in a plough-based system.

The research improves the strength of plastic using avocado seed starch and PLA. The effect of blending avocado seed starch and PLA was optimized using the RSM approach by using two variables: water absorption and biodegradability. Mixing them using RSM gave the best result: 1.8 g of starch and 3 g of PLA. Degradable plastic has a (tensile strength of 10.1 MPa; elongation at break of 85.8%; young modulus of 190 MPa). Infrared spectroscopy showed that the plastic had a -OH bond at 3273.20 cm-1, 3502.73 cm-1, 3647.39 cm-1, a CH2 bond at 2953.52 cm-1, 2945.30 cm-1, 2902.87 cm-1, a C=C bond at 1631.78 cm-1, and a C-O bond at 1741.72 cm-1. The plastic decomposed in soil. It was organic and hydrophilic. Thermal tests, the plastic can withstand heat well, losing weight at 356.86°C to 413.64°C, forming crystals and plastic melts at 159.10°C—the same as PLA. Melt flow test, sample melts before measurement, therefore not measurable—process conditions that affect. Water absorption of 5.763% and biodegradation rate of 37.988% decomposed for 12 days. In morphology analysis, the starch and PLA fused to form a smooth surface. RSM found value was close to 1. RSM gave the best process parameters.

Background: Distal sensory polyneuropathy (DSP) and distal neuropathic pain (DNP) remain significant challenges for older people with HIV (PWH), necessitating enhanced clinical attention. HIV and certain antiretroviral therapies (ART) can compromise mitochondrial function and impact mitochondrial DNA (mtDNA) replication, which is linked to DSP in ART-treated PWH. Methods: This study investigated mtDNA, mt fission and fusion protein, and mt electron transport chain protein changes in the dorsal root ganglion (DRG) and sural nerve (SuN) from 11 autopsied PWH. In antemortem standardized assessments, six had no or one sign of DSP, while five exhibited two or more DSP signs. Digital droplet polymerase chain reaction (ddPCR) measured mtDNA quantity and the common deletion (CD) in isolated DNA. Results: We found lower mtDNA copy numbers in DSP+ donors. SuN exhibited a higher proportion of mtDNA CD than DRGs in both groups. Mitochondrial electron transport chain (ETC) proteins were altered in DRG of DSP+ compared to DSP- donors, particularly complex I. Conclusion: These findings suggest reduced mtDNA quantity and increased CD abundance may contribute to DSP in PWH, indicating diminished mitochondrial activity in sensory neurons. Accumulated ETC proteins in the DRG imply impaired mitochondrial transport to the sensory neuron's distal portion. Identifying molecules to safeguard mitochondrial integrity could aid in treating or preventing HIV-associated peripheral neuropathy.

In this paper, the optimal approximation algorithm is proposed to simplify non-linear functions and/or discrete data as piecewise polynomials by using the constrained least squares. In time-sensitive applications or in embedded systems with limited resources, the runtime of the approximate function is as crucial as its accuracy. The proposed algorithm search to find the Optimal Piecewise Polynomial (OPP) with minimum computational cost while ensuring the error below a specified threshold. This was accomplished by using smooth piecewise polynomials with optimal order and number of intervals. The computational cost only depends on polynomial complexity, i.e., the order and the number of intervals at runtime function call. For optimal approximation, computational costs for all the possible combinations of piecewise polynomials were calculated and tabulated as ascending order for the specific target CPU off-line. Each combination was optimized through constrained least squares and random selection method for given sample points. Afterward, whether the approximation error is below the predetermined value is examined. When the error is permissible, the combination is selected as the optimal approximation or the next combination was examined. To verify the performance, several representative functions were examined and analyzed.

The minimum vertex cover (MVC) problem is a canonical NP-hard combinatorial optimization problem, aiming to find a smallest set of vertices such that every edge has at least one endpoint in the set, which has extensive applications in cyber security, scheduling, and monitoring link failures in wireless sensor networks (WSNs). Numerous local search algorithms have been proposed to obtain a “good” vertex cover. However, due to the NP-hard nature, it is challenging to efficiently solve the MVC problem, especially on large graphs. In this paper, we propose an efficient local search algorithm for MVC called TIVC, which is based on two main ideas: A 3-improvements (TI) framework with tiny perturbation, and an edge selection strategy. We conducted experiments on real-world large instances of a massive graph benchmark. Compared with two state-of-the-art MVC algorithms, TIVC shows superior performance in accuracy and possesses a remarkable ability to identify significantly smaller vertex covers on many graphs.

The global financial crisis of 2008, triggered by the collapse of Lehman Brothers, highlighted a banking system that was widely exposed to systemic risk. The minimization of the systemic risk via a close and detailed monitoring of the entire banking network became a priority. This is a complex and demanding task considering the size of the banking systems: in the US and the EU they include more than 10000 institutions. In this paper, we introduce a methodology which identifies a subset of banks that can: a) efficiently represent the behavior of the whole banking system and b) provide, in the case of a failure, a plausible range of the crisis dispersion. The proposed methodology can be used by the regulators as an auxiliary monitoring tool, to identify groups of banks that are potentially in distress and try to swiftly remedy their problems and minimize the propagation of the crisis by restricting contagion. This methodology is based on Graph Theory and more specifically Complex Networks. We termed this setting a “multivariate Threshold – Minimum Dominating Set” (mT–MDS) and it is an extension of the Threshold – Minimum Dominating Set methodology (Gogas e.a., 2016). The method was tested on a dataset of 570 U.S. banks: 429 solvent and 141 failed ones. The variables used to create the networks are: the total interest expense, the total interest income, the tier 1 (core) risk-based capital and the total assets. The empirical results reveal that the proposed methodology can be successfully employed as an auxiliary tool for the efficient supervision of a large banking network.

Recent advance in electric propulsion systems have demonstrated that these engines can be used for for long-duration interplanetary voyages. Constant specific impulse engine described as a thrust-limited engine is an example of this type of engine, processing the ability to operate at a constant level of impulse. The determination of minimum-fuel, planar heliocentric Earth-to-Mars low-thrust trajectories of spacecraft using a constant specific impulse is discussed considering the first-order necessary conditions derived from Lawden’s primer vector theory. The minimum-fuel low-thrust Earth-to-Mars optimization problem is then solved in two-dimensional, heliocentric frame using both indirect and direct methods. In the indirect method, two-point-boundary-value problems are derived to solve boundary value problems for ordinary differential equations. In the direct method, a general-purpose optimal control software called GPOPS-II is adopted to solve these optimal control problems. Numerical examples using two different optimization methods are presented to demonstrate the characteristics of minimum-fuel planar low-thrust trajectories with on-off-on thrust sequences at three chosen flight times and available maximum powers. The results are useful for broad trajectory search in the preliminary phase of mission designs.

There is still an ambiguous opinion on oat regarding its safety for people with celiac disease (CD). Some studies have confirmed different content of oat immunoreactive epitopes in different cultivars while others explain the differences in consequence of cross-contamination with gluten-rich species or as ELISA cross-reactivity of oat homological epitopes with antibodies against wheat gliadin. Our study was based on a two-year mapping of oat immunoreactive epitopes in a set of 132 oat cultivars using the G12-based ELISA kit. Although repeated evaluation confirmed high interannual variability (RSD ≥ 30%) in approximately 2/3 of the cultivars, the permitted gluten content (20 mg kg-1) has not been exceeded except for contaminated cultivar Sirene. The polymorphism of purified avenins determined by SDS-PAGE revealed the occurrence of 2 bands around 30 kDa in oat cultivars with relatively high gluten content (12-16 mg kg-1) except for the cultivar Leo while this pattern occurred only in 50% oat cultivars with low gluten content. Quantification of gluten epitopes on purified avenin unit further revealed the three materials (Mojacar, Maris Oberon, SG-K 16370) with the lowest gluten content and presence of one band at 30 kDa. The band pattern at 30 kDa thus represents a promising breeding marker.

Diversification is an important strategy for managing risk in agricultural systems. Risk analysis can help to support farmers’ diversification strategies, but existing analytical methods are complicated and little used. The minimum regret model helps to fill this gap. It provides a simple, transparent calculation procedure that can be executed with existing spreadsheet software. Regret is an important heuristic in the behavioural sciences and regret-based models are used in finance. The article presents the model with a numerical example. It also presents a framework to compare minimum regret portfolios with two limit cases (maximum utility and minimax regret). A case study illustrates the use of the model and the comparative framework.

In this paper, firstly, some questionable formulas and conceptual oversights of previous reduced sigma set unscented transformation (UT) methods are revised through theoretical analysis. Then the revised UT methods based Kalman filters are used in a GPS/INS tightly-coupled system. The Kalman filter flows are the kind of square-root, since the square-root unscented Kalman filters (SRUKFs) can guarantee the stability of the system. By using the reduced sigma set SRUKFs (which contain simplex sigma set square-root unscented Kalman filter (S-SRUKF), spherical simplex sigma set square-root unscented Kalman filter (SS-SRUKF) and minimum sigma set square-root unscented Kalman filter (M-SRUKF)), the computation cost is greatly saved compared with the standard SRUKF, while the accuracy of the GPS/INS tightly-coupled system still maintained. The structure of the GPS/INS tightly-coupled system is in the form of error state, and the time updates of the state and the state covariance of SRUKFs are directly estimated without using UT, thus the computational time is also greatly saved. The pseudo-satellite is introduced to aid the system when the observation information is deficient, for example, when the GPS signal is deficient in the maneuver environment. By using the pseudo-satellite, the optimal performance of the system is guaranteed. Experiment of unmanned aerial vehicle (UAV) showed that the pseudo-satellite aided mechanism worked well.

A combination of compost and biochar has been proven to be a promising strategy to immobilize metal(loid)s and improve soil properties. To the best of our knowledge, no study has been conducted to investigate the effect of biochar and compost combination administered at different rates on mining technosol. Thus, we investigated the effect of different rates of compost (20%, 40%, 60% w/w) in combination with biochar (0%, 2%, 6% w/w) on soil physiochemical properties and the mobility of arsenic (As) and lead (Pb), the ability of Arabidopsis thaliana (ecotype Columbia-0) to grow and accumulate metal(loid)s. All modalities improved pH and electrical conductivity, stabilized Pb and mobilized As, but only the mixture of 20% compost and 6% biochar improved plant growth. Plants in all modalities showed a significant reduction in root and shoot Pb concentrations compared to the non-amended technosol. Whereas, As shoot concentration was significantly lower for plants in all modalities (except with 20% compost only) compared to non-amended technosol. For root As, plants in all modalities showed no significant reduction except for the mixture of 20% compost and biochar. Overall, the mixture of 20% compost with 6% biochar represents the optimum combination for improving plant growth and As uptake.

Background. The minimum wage has become a standard measure in economic and social policies of countries all over the world and it directly or indirectly affects between 20% and 30% of the labour force. The primary objective of this measure is to guarantee that workers receive a minimum wage that allows them to lead a decent life, thereby reducing inequality and poverty. However, studies on the minimum wage have not focused on assessing the effects on these dimensions, but on employment, anticipating a negative effect (in line with the traditional theory of perfect competition), which they have been unable to substantiate. Objectives and Methods. The objective of this study is to address this research gap by analysing the effects of minimum wage increases on income inequality and poverty. To this end, firstly, a systematic review of the empirical analyses was conducted using the PRISMA methodology, with a view to ensuring that all empirical evidence was available. Secondly, the Spanish case was examined. As the significant increase in minimum wage in Spain in 2019 (21,3% in real terms) presents an invaluable opportunity to utilise this event as a natural experiment to generate new evidence, a difference-in-differences approach was employed to assess the impact of this phenomenon. Results. In relation to the first objective, a number of non-exhaustive and outdated literature reviews have been identified, which have been subjected to a critical review. In addition, a total of 31 articles that empirically analysed this relationship in recent years (2020-2024) have been included. The available evidence indicates a clear inverse relationship between the minimum wage and inequalities and poverty. Regarding the Spanish case, there has been a dearth of scientific studies on this subject, particularly in the context of the significant increase observed in 2019, which makes this article of particular relevance. The results are statistically significant, demonstrating an increase of approximately 18% in annual gross income among low-income households, relative to the control group. Furthermore, there is evidence of a spillover effect and a lighthouse effect towards income groups closer to the treatment group. This suggests that the minimum wage increase has a positive impact on the income of workers earning just above the new minimum and even below it. This result is consistent with the existing literature, which shows that minimum wage increases have a positive effect on the income of workers earning slightly above or below the new minimum. Scientific contribution. In doing so, two new basic scientific contributions were made: a systematic, exhaustive, and up-to-date literature review (up to June 2024), as there is, to our knowledge, no recent systematic review of this relationship (minimum wage vs. inequality). Then, the introduction of new scientific evidence demonstrating that a significant increase in the minimum wage can significantly improve the income of low-wage earners without the adverse effects that would otherwise disrupt this positive effect, thereby reducing income inequality and poverty. As a limitation of the study, it would be desirable to delve deeper into other aspects not analysed here, such as the effects on productivity and consumption. Furthermore, it has not been possible to analyse the medium and long-term effects, due to data limitations. Nevertheless, there is evidence that inequality and poverty are on a downward path.

Context: Despite the effort put into developing standards for structuring construction cost, and the strong interest into the field. Most construction companies still perform the process of data gathering and processing manually. That provokes inconsistencies, different criteria when classifying, misclassifications, and the process becomes very time-consuming, particularly on big projects. Additionally, the lack of standardization makes very difficult the cost estimation and comparison tasks. Objective: To create a method to extract and organize construction cost and quantity data into a consistent format and structure, to enable rapid and reliable digital comparison of the content. Method: The approach consists of a two-step method: Firstly, the system implements data mining to review the input document and determine how it is structured based on the position, format, sequence, and content of descriptive and quantitative data. Secondly, the extracted data is processed and classified with a combination of data science and experts’ knowledge to fit a common format. Results: A big variety of information coming from real historical projects has been successfully extracted and processed into a common format with 97.5% of accuracy, using a subset of 5770 assets located on 18 different files, building a solid base for analysis and comparison. Conclusion: A robust and accurate method was developed for extracting hierarchical project cost data to a common machine-readable format to enable rapid and reliable comparison and benchmarking.

Environment approachable products such as fuels and lubricants are among the best choices in several countries that contain renewable products as alternatives. To protect human life, alternative methods of saving the environment and production balance is needed to reduce the effects of the crisis and the contamination of the Environment. This research concentrated on the Manufacturing and testing of bio- grease from sugar cane filter mud vegetable oil as a lubricant for friction reduction and determining the properties of both bio grease and Mineral oil grease with environmental problems. SC filter mud oil as an alternative use for bio-grease preparation in addition to mineral oil grease. The Testing was accepted to determine the quality of the eco-friendly grease produced. For the preparation of this bio- grease, the SC Filter cake sample is taken from different sugar factory which found in Ethiopia. The sample has a moisture content of 78%. Using this sample first oil is extracted by Soxhlet apparatus, n-hexane solvent and temperature for extraction from 42 -68℃. The maximum temperature and time for extraction of oil were 68 and 7hrs respectively. The extracted oil's physical properties include color, acid value, specific graphite, saponification value, iodine value, density, and viscosity. Finally, the friction behavior in function of time for both grease at identical load, the friction coefficient vs time for SC filter Cake Grease_ Na_ MoS2 and industrial mineral one (I_ Greasily _ MoS2), grease was determined.

This paper proposes the optimization method for the minimum mass of permanent magnet (PM) excited homopolar inductor alternator (HIA) with air-gap winding used for high-speed driving system. The calculation results show that there is an optimal value for shell diameter and unit number of HIA to make the mass to be smallest. A 1 MW at 22000 rpm PM excited HIA is designed. The analytical results are verified by the FEM simulations. The losses, temperature rise, rotor stress and modal of the PM excited HIA are also analyzed. The calculation results show that the solid rotor eddy-current losses and the temperature rise of PM excited HIA are acceptable. Also the rotor strength is adequate, and the rotor system is a stiffness rotor, and it can safely operate. Finally, the comparison between PM excited HIA and permanent magnet rotor machine is discussed.

As urban development increases in density, the space to grow urban trees becomes more constrained. In heavily developed areas, small stature trees can be planted to reduce both above- and below-ground conflicts with infrastructure elements. However, even these species have their limits when placed in extremely confining conditions. In this study, we build on past work to determine the minimum planting widths of small stature urban trees. We found that species, stem diameter, and the height at which stem diameter measurements occurred were all strong predictors of trunk flare diameter (adjusted R² of 0.843). Additionally, we modelled the relationship between planting space and the presence or absence of hardscape conflicts – using the predictions derived from this effort to project the potential cost savings in two United States cities. Study results provide a guideline to create sufficient space for urban trees and minimize infrastructure damage and associated cost savings.

During the extraction of hard coal in Polish conditions, methane is emitted, which is referred to as mine gas. As a result of the desorption of methane, a greenhouse gas is released from coal seams. In order to reduce atmospheric emissions, methane from coal seams is captured by a methane drainage system. On the other hand, methane, which has been separated into underground mining excavations, is discharged into the atmosphere with a stream of ventilation air. For many years, Polish hard coal mines have been capturing methane to ensure the safety of the crew and the continuity of mining operations. As a greenhouse gas, methane has a significant potential, as it is more effective at absorbing and re-emitting radiation than carbon dioxide. The increase in the amount of methane in the atmosphere is a significant factor influencing global warming, however, it is not as strong as the increase in carbon dioxide. Therefore, in Polish mines, the methane-air mixture captured in the methane drainage system is not emitted to the atmosphere, but burned as fuel in systems, including cogeneration systems, to generate electricity, heat and cold. However, in order for such use to be possible, the methane-air mixture must meet appropriate quality and quantity requirements. The article presents an analysis of changes in selected parameters of the captured methane-air mixture from one of the hard coal mines in the Upper Silesian Coal Basin in Poland. The paper analyses the changes in concentration and size of the captured methane stream through the methane capturing system. The gas captured by the methane drainage system, as an energy source, can be used in cogeneration, when the methane concentration is greater than 40%. Considering the variability of CH4 concentration in the captured mixture, it was also indicated which pure methane stream must be added to the gas mixture in order for this gas to be used as a fuel for gas engines. The balance of power of produced electric energy in gas engines is presented. Possible solutions ensuring constant concentration of the captured methane-air mixture are also presented.

The research aims to improve some of the physical and hydro-physical properties of some Vertisols in the southern region (part of the eastern Houran Plateau) in Sweda Governorate at the south of Syria. Using different quantities of volcanic ash, soil samples were collected from the Al-Thahallah village from a depth of (0-30) cm, The experiment was designed according to the complete random design with one factor that represents the ash quantity (1.25, 2.5, 5) %, with three replicates for each treatment in addition to the control treatment a0. The experiment was carried out within the plastic pots during agricultural season 2018/2019, in which the wheat of the Sham variety 3 were cultivated as a cover plant. The results showed that the addition of volcanic ash at the quantity of 5% led to a significant increase in the infiltration rate by (328.60) %,%, where the filtration rate increased from 0.42 cm/hr -1 to 1.80 cm.h-1, as well as for each of the air porosity by (89) % and the volume of infiltrate water by (40) %, compared with the control. The above-mentioned addition also resulted in a decrease in both dry bulk density, total soil porosity and volumetric swelling coefficient by (18.60, 5.80, 314) % Respectively, compared to the control. The addition also contributed to the reduce in the weighted moisture content when saturation and the field capacity, at the level of significance of 5%. The research recommends adding volcanic ash to the soil at a quantity of 5%, and adding enhancements with volcanic ash at various levels such as organic waste.

This paper deals with the analysis of the temperatures in a group of 36 African countries. By looking at the maximum, minimum and the range (the difference between the maximum and the minimum) and using a long memory model based on fractional integration and cointegration, we first show that all series display a long memory pattern, with a significant positive time trend in 29 countries for the maximum temperatures and in 33 for the minimum ones. Looking at the range, the estimated value for the order of integration is smaller than the one based on maximum or minimum temperatures in 17 countries. Performing fractional cointegration tests between the maximum and minimum temperatures, our results indicate that the two series cointegrate in the classical sense (i.e., with a short memory equilibrium relationship) in a group of 11 countries, and there is another group of eight countries displaying cointegration in a fractional sense. The remaining 17 countries with no evidence of cointegration are therefore at the very high risk of climate change due to the absence of long-term comovement in their maximum and minimum temperatures. Findings in this paper are of tremendous interpretations and relevance for the analysis and climate projections in Africa.

Learning systems have been very focused on creating models that are capable of obtaining the best results in error metrics. Recently, the focus has shifted to improvement in order to interpret and explain their results. The need for interpretation is greater when these models are used to support decision making. In some areas this becomes an indispensable requirement, such as in medicine. This paper focuses on the prediction of cardiovascular disease by analyzing the well-known Statlog (Heart) Data Set from the UCI’s Automated Learning Repository. This study will analyze the cost of making predictions easier to interpret by reducing the number of features that explain the classification of health status versus the cost in accuracy. It will be analyzed on a large set of classification techniques and performance metrics. Demonstrating that it is possible to make explainable and reliable models that have a good commitment to predictive performance.

This paper explores the coordination of the agricultural cooperative to supermarket or E-commerce sup-ply chain, under the condition of quantity loss with a mixed decay function of exponential and logistical distribution. The nature of this process is analyzed, and the corresponding demand and supply functions with single- and multi-stage discount strategies are constructed respectively to create a working model. The optimal discount ratios for supermarkets and agricultural cooperatives in decentralized and central-ized decision-making modes coupled with single- and multi-stage discounts are calculated respectively. Finally, a universal optimal strategy is designed, which can be applied to various quantity decay scenarios and makes the discount strategy more generalized. The results show that discounts can coordinate supply chains more effectively; not only is fresh agricultural produce sold before it starts to rot, but the benefit conflicts arising from both supermarkets vs. cooperatives and traditional vs. E-commerce channels are equilibrated. Further, multi-stage discounts are more effective than single-stage ones, but optimal discount ratios rely on the initial quantity of fresh agricultural produce in the supply chain; its market share in the traditional distribution channel; the potential market size; retail price; the price sensitivity coefficient of the channel; the cross-elasticity coefficient of prices between different channels; and the properties of the quantity loss.

The minimum ignition energy (MIE) has been extensively studied via experiments and simulations. However, our literature review reveals little quantitative consistency, with results varying for f=1.0 from 0.324 to 1.349 mJ, and for f=0.9 from 0.22 to 0.944 mJ. Therefore, there is a need to resolve these discrepancies. This RANS study aims to partially address this knowledge gap. Additionally, it presents other flame evolution parameters essential for robust combustion design. Using the reactingFOAM solver we predict the threshold energy required to ignite the fuel mixture. For this, the single step using the Arrhenius law is selected to model ignition in the flame kernel of stochiometric and lean CH₄/air mixtures, allowing it to develop into a self-sustained flame. The ignition power density, an energy quantity normalised with volume is incrementally varied keeping the kernel critical radius r_s constant 0.5 mm in the quiescent mixture of two equivalence ratios fs 0.9, and 1.0, for varied operating pressures 1, 5 and 10 bar at constant initial temperature 300 K. The minimum ignition energy is validated with twelve independent 1 bar data sets both numerical and experiments. Finally, a mathematical formulation of MIE is devised, a function of pressure and equivalence ratio shows a slightly curved relationship.

Law of conservation of energy is the most well-established law of modern physics. But, inflationary cosmological model which assumes the universe to be created from a point of singularity has not been able to identify the source of energy for creation of this universe. As per uncertainty principle, a quantum vacuum fluctuation can at most create energy of ~10^-8 kg in a Planck time of ~5.4 ×10^-44 s whereas total positive energy due to matter/vacuum existing in the universe is more than ~10⁵⁴ kg. To solve this problem, we have recently published a new cosmological model (Biswaranjan Dikshit, Canadian Journal of Physics, 100, 218-225, [2022]) in which we have mathematically proved that the total energy of the universe can be zero right from the beginning of the universe to till date due to negative gravitational potential energy and thus law of conservation of energy can be satisfied during creation of the universe from nothing. In this article, starting from a simple argument, we explain why net energy of the universe can be zero only in our model, not in standard cosmological model. An interesting fact pointed out in this paper is that the factor ~10⁶² by which radius of universe has increased from its starting value of ~10^-36 m to present value of ~10²⁶ m is same as the factor by which positive energy has increased from Planck energy ~10^-8 kg to present value ~10⁵⁴ kg. This is in agreement with our new model that predicts the positive energy of universe to be proportional to the radius of universe. We also bring out to the notice that zero energy universe is possible only if smallest possible length in nature is, l_min=l_p(π/2)^1/2 = 2.0×10^-35 m. Minimum possible length is important in theory of quantum gravity and string theory.

The aim of this paper is to analyze the real impact of ICT skill mismatch on SME’s sustainable competitiveness in presence of minimum wage guaranteed. As part of public policies – the minimum wage need to maintain a balance between increasing employment and not being a burden for the companies, leading them to bankruptcies, especially in times of disruptive change in which economy have to be more resilient. The rapid progress in information and communication technologies has dramatically redefined the rising unemployment as a result of skills mismatch. This paper aims to understand, on one side if, there is a match between the supply demand of ICT skills and how increasingly powerful digital technologies affect skills, jobs, and the demand for human labour. On the other, if increasing productivity and a fair minimum wage could be an integrated approach in stimulating SME’s in increasing sustainable competitiveness.

In order to study the strength changes of concrete specimens under different loading conditions, based on the principle of minimum energy dissipation and from the Angle of concrete failure energy per unit area, the finite element numerical simulation software was applied to concrete specimens with different failure modes of tension, compression, bending and torsion, and the double-broken line damage constitutive model was adopted to simulate and analyze the failure forms of concrete specimens under different loading conditions. The failure area and failure energy of each specimen during loading were quantitatively calculated under each failure mode, and the relationship between the failure area and failure energy consumed under different failure modes was analyzed. The results show that under different failure modes, the failure area of concrete specimens is different, the energy consumed during failure is different, and the strength is different. However, in the process of failure, no matter how the failure mode changes, the failure energy W per unit area remains unchanged and is a constant, which is related to the physical properties of concrete itself.

Nowadays, the increasingly serious environmental pollution and energy problems urgently require internal combustion engine-based transportation vehicles to upgrade or replace, so the new energy transportation vehicles based on hybrid power and fuel cells have gradually stepped on the stage and continue to innovate. The shipping industry is one of the main sources of global greenhouse gas emissions. The development of clean energy ships represented by fuel cells has attracted wide attention. Fuel cell has the advantages of clean, pollution-free and low noise, but it has some disadvantages such as insufficient dynamic response performance and fast performance decay. Limited by the characteristics of a single energy source, a variety of energy sources and bidirectional DC converters are usually mixed together to form a hybrid ship to improve the flexibility, stability and economy of the ship, and enhance its adaptability to complex sea conditions through the reconfiguration of power system energy. Taking fuel cell ferry "FCS Alsterwasser" as the research object, this study proposed an improved equivalent minimum hydrogen consumption energy management strategy based on fuzzy logic control. First, the power system of the modified mother ship was simulated, and a hybrid power system including fuel cell, lithium iron phosphate battery and supercapacitor was proposed. Then, the dynamic system simulation model and double closed loop PI control model are established in MATLAB/Simulink, and the reliability of the model is verified by the simulation analysis of charge and discharge characteristics. Then, the feasibility of the proposed method is demonstrated by designing simulation experiments based on typical working conditions of the mother ship. The simulation results show that under the premise of meeting the load requirements, the control strategy designed in this paper has a better optimization effect than the S-type penalty function in terms of lithium battery power, lithium battery SOC, bus voltage stability and equivalent hydrogen consumption, which improves the stability and economy of the power system, and has certain engineering practical value.

Background: The isoflurane minimum alveolar concentration (MAC) was measured in rats chronically treated with WIN 55,212-2. Methods: The isoflurane MAC was determined in 24 male rats from the end expiratory samples at time of tail clamping under the following conditions: without treatment (MACISO), in rats treated for 21 days with WIN 55,212-2 (MACISO+WIN55) and other group 8 days after stopping treatment for 21 days with WIN 55,212-2 (MACISO+WIN55+8D). Results: The MACISO was 1.32 ± 0.06. In the MACISO+WIN55 group the MAC increase to 1.69 ± 0.09 (28%). After 8 days stopping treatment, MAC did not decrease significantly 1.67 ± 0.07 (26%). Conclusions: The administration for 21 days of WIN 55,212-2 increases the MAC of isoflurane in rats; this effect does not disappear after 8 days of discontinuing treatment with the synthetic cannabinoid.

According to Landauer’s principle, the energy of a particle may be used to record or erase N number of information bits within the thermal bath. The maximum number of information N recorded by the particle in the heat bath is found to be inversely proportional to its temperature T. If at least one bit of information is transferred from the particle to the medium, then the particle might exchange information with the medium. Therefore for at least one bit of information, the limiting mass that can carry or transform information assuming a temperature T= 2.73 K is equal to m = 4.71810-40 kg which is many orders of magnitude smaller that the masse of most of today’s elementary particles. Next, using the corresponding temperature of a graviton relic and assuming at least one bit of information the corresponding graviton mass is calculated and from that, a relation for the number of information N carried by a graviton as a function of the graviton mass mgr is derived. Furthermore, the range of information number contained in a graviton is also calculated for the given range of graviton mass as given by Nieto and Goldhaber, from which we find that the range of the graviton is inversely proportional to the information number N. Finally, treating the gravitons as harmonic oscillators in an enclosure of size R we derive the range of a graviton as a function of the cosmological parameters in the present era

In this paper, we first investigate secure communications for a two-hop interference relay system in the wireless Internet of Things (IoT), where K source-destination pairs communicate in the presence of an eavesdropper. Explicitly, we jointly design source, relay and destination matrices upon minimizing total mean-squared error (MSE) of all legitimate destinations while keeping the MSE at eavesdropper above a certain threshold. We illuminate that the joint design of the source, relay and destination matrices subject to both secrecy and transmit power constraints. More specifically, we proposed an efficient iterative distributed algorithm to simplify the process of the joint design for optimal source, relay and destination matrices. Furthermore, the convergence of the iterative distributed algorithm is described. Additionally, the performances of the proposed algorithm, including both its secrecy rate and MSE, are characterized with the aid of simulation results. We demonstrate that our proposed algorithm outperforms the traditional approach. As a benefit, secure communications can be guaranteed by using the proposed algorithm for the multiple input multiple output (MIMO) interference relay IoT network in the presence of an eavesdropper.

In estimating the maximum and minimum index void ratios for mixtures of sand and silt, the values of several empirical constants must be determined based on the type of sand and silt involved. These empirical constants are the filling coefficient, a, and embedment coefficient, b, both of which can be determined either through lab testing or correlations. These constants are then used in equations to predict the maximum and minimum index void ratios of the sand-silt mixtures. The study reported here developed simple correlations for estimating the filling and embedment coefficients using readily obtained laboratory data. These models were found to be excellent in developing filling and embedment coefficients that accurately (R2 values typically of 0.94 or greater.) predicted values of the index void ratios for sand and silt mixtures.

A new method for wide-area urban roof assessment of suitability for solar photovoltaics is introduced and validated. Knowledge of roof geometry and physical features is essential for evaluation of the impact of multiple rooftop solar photovoltaic (PV) system installations on local electricity networks. This paper begins by reviewing and testing a range of existing techniques for identifying roof characteristics. It was found that no current method is capable of delivering accurate results with publicly available input data. Hence a different approach is developed, based on slope and aspect using LIDAR data, building footprint data, GIS tools and aerial photographs. It assesses each roof’s suitability for PV installation. That is, its properties should allow the installation of at least a minimum size photovoltaic system. In this way the minimum potential solar yield for region or city may be obtained. The accuracy of the new method is then established, by ground-truthing against a database of 886 household systems. This is the largest validation of a rooftop assessment method to date. The method is flexible with few prior assumptions. It is based on separate consideration of buildings and can therefore generate data for various PV scenarios and future analyses.

(1) Background: Microalgae cultures are greatly facilitated if growers can easily and economically ascertain the quantitative and qualitative status of the culture continuously with satisfactory ac-curacy. (2) Methods: The locally isolated microalgae Dunaliella sp. and Anabaena sp. were cultured in small volumes with 2 intensities of white light (2000 and 8000 lux) and with green, blue and red light and the increase of their biomass and pigments was studied. Pigment analyses, continuous recordings of absorption spectra and calibration curves were performed. (3) Results: The intensity of 8000 lux white light yielded the highest increase in biomass, chlorophylls and carotenoids in Dunaliella sp. while 2000 lux and green light caused the greatest increase in biomass and phy-cocyanin in Anabaena sp. From the examination of the absorption spectra, the evolution of the pigment content can be estimated and both pigments and biomass are correlated very satisfactorily with the wavelength of 750 nm. (4) Conclusions: The use of absorption spectra as an easy, fast and economical method can be a useful tool for a good approximation of the state of the microalgae culture. This is clearly shown when the spectra of the culture under different lighting colors are compared which have a catalytic effect on the level of the pigments leading to the increase in carotenoids and phycocyanin of the green light.

Momordica charantia is a plant of the Cucurbitaceae family which is known as bitter gourd and grows widely in tropical and subtropical regions of the world. The various properties of bitter gourd are closely related to the substances or compounds they contain. Bitter gourd contains many secondary metabolites including alkaloids, terpenoids, steroids and flavonoids. These chemical compounds are spread in several parts of the plant such as roots, stems, leaves, and fruit. Apart from containing several organic compounds, bitter melon also contains the phytohormone gibberellin which is quite potential and useful as a biostimulant. The aim of the research was to isolate, purify, and determine the content of gibberellin (GA-3) contained in bitter gourd (M. charantia), and to determine its effect on the vegetative and generative growth of soybean plants, as well as the effect of GA-3 application on the nutritional content of soybean seeds. resulting from. Apart from that, it was also observed the effect of GA-3 application on the chlorophyll content of soybean plants, as well as the activity of the alpha-amylase enzyme in treated soybean seeds. The process of isolation and purification of GA-3 was carried out by thin layer chromatography and adsorption column chromatography on Silica Gel G-60. Characterization of GA-3 was carried out by Reversed-Phase High-Performance Liquid Chromatography (RP-HPLC), Fourier Transform Infrared (FT-IR), and Mass Spectroscopy (MS). RP-HPLC and FTIR results from gibberellin GA-3 isolates showed retention times and wave numbers that were relatively the same as GA-3 standards. From the results of the study it was found that the content of the gibberellin GA-3 hormone in bitter gourd was 4.12 mg/g dry weight. The GA-3 isolate had a significant effect on the growth of soybean plants in both the vegetative and generative phases for each parameter observed compared to the control and 1% NPK fertilizer. The protein content in soybean seeds was 38.17%. The chlorophyll content at the end of the vegetative and generative phases were 33.34 and 11.5 CCI, respectively. The addition of GA-3 isolate increased the activity of the α-amylase enzyme in soybean seeds compared to the control with an average of 271.65 U/mL.

Antimicrobial peptides (AMPs) are a promising alternative to antibiotics to combat drug resistance in pathogenic bacteria. However, the development of AMPs with high potency and specificity remains a challenge, and new tools to evaluate antimicrobial activity are needed to accelerate the discovery process. As a step toward direct prediction of the experimental minimum inhibitory concentration (MIC) of AMPs, we proposed MBC-Attention, a combination of a multi-branch CNN architecture and attention mechanism. Using a curated dataset of 3929 AMP against Escherichia coli, the optimal MBC-Attention model achieved an average Pearson correlation coefficient of 0.775 and an RMSE of 0.533 (log μM) in three independent tests of 393 sequences each. This results in a 5–12% improvement in PCC and 7–13% improvement in RMSE compared with RF and SVM models. Ablation studies confirmed that both attention mechanisms contributed to performance improvement.

Soil quality is related to food security and human survival and development. In recent years, due to the acceleration of urbanization and the increase of abandoned land, land degradation occurs, poor topsoil quality. In this study, the minimum data set (MDS) was constructed through principal component analysis (PCA) to determine the indicator data set for evaluating topsoil quality in Tieling County, China. In addition, the soil quality index (SQI) was calculated to analyze the spatial distribution characteristics and influencing reasons of topsoil quality in Tieling County. The re-sults showed that MDS included total potassium (TK), Clay, zinc (Zn), soil organic matter (SOM), soil water content (SWC), cation exchange capacity (CEC), pH, and copper (Cu). The MDS indicators can well replace all indicators to evaluate the topsoil quality in the study area. The overall soil quality of Tieling County showed a trend of low in the east and high in the west, and gradually increased from the hilly area to the plain area. The evaluation results are consistent with field research, which can provide reference for other topsoil quality evaluation, and it also provide a basis for the formulation of soil quality improvement measures.

Despite the ecological importance of forest tree species, our study was motivated by scarce data on dendrochronology studies limited to the northwestern part of Tajikistan due to lack of access to such a part of the country which is difficult to access. Current studies on Junipers in the northwestern part of Tajikistan identified that tree ring-based climate reconstruction is possible. Cores of Juniperus Turkestanica from Taboshar area, Sogd province were developed into 176-year tree-ring width chronology. In the current study a summer (June-September) minimum temperature reconstruction spanning AD 1840–2016 was developed, which can explain 30.0% of the instrumental variableness for the period of 1940–2015. Five warmest (1856–1866, 1869–1871, 1907–1916, 1923–1935, 1988–2016) and four coldest time periods (1840–1855, 1872–1906, 1917–1922, 1940–1984) were identified. The developed reconstruction coincides with cold and warm periods with prior investigations from tree-rings in China, Mongolia, Kyrgyzstan, Kazakhstan and Tajikistan. Spatial correlation analysis with the gridded minimum temperature data shows that the temperature reconstruction covers geographical representation over High Asia. Significant correlation was found between temperature reconstruction with summer SST, which suggests strong linkages of regional temperature variability with Indian-Ocean climate system. The obtained spectral peaks from the spectral analysis of the summer temperature reconstruction were significantly at 84.7-year (90%), 2.9-year (99%), 2.6-year (99%), 2.5-year (99%), 2.4-year (99%) and 2.2-year (99%).

High dietary phosphate intake and poor adherence to phosphate-binding-therapy elevate the risk of hyperphosphatemia in maintenance hemodialysis (HD; MHD) patients. Therefore, chronic kidney disease-related mineral and bone disorder (CKD-MBD) indicators increase; consequently, risks of CKD-MBDs and inflammation are elevated. This double-blind, randomized control trial intervention study was designed to investigate the possibility of reducing blood CKD-MBD indicators and modulating inflammatory indicators by consuming low-phosphate (LP) meals accompanied by a minimum dose of a calcium-based phosphate binder (CaCO3). MHD patients were recruited and randomly assigned to an LP meal group (LP group) or a control group. After initial data collection, blood collection, and dietary counseling, subjects were asked to consume a washout diet for 1 week. During the washout diet period, subjects consumed their usual diet but took 1 tablet of calcium carbonate (1CaCO3) as a phosphate binder with each meal. After the washout diet period, subjects in the LP group and control group respectively consumed LP meals and regular meals twice a day for 1 week. Meat in the LP meals was boiled before the regular cooking process, but meat in control meals was not. All meals were supplied by a central kitchen so that the contents of phosphate and other nutrients could be identified. In total, 40 MHD patients completed the study program. After 1 week of the dietary intervention, the blood Ca x P product and dietary phosphate had significantly decreased in the LP group compared to the control group (p&lt;0.05). The LP group had significantly lower variations in dietary phosphate intake, blood calcium, Ca x P product, and tumor necrosis factor (TNF)-α than the control group by comparing differences between after the dietary intervention and the baseline (△after intervention - baseline, p&lt;0.05). The increase in dietary phosphate intake (△3rd - 2nd dietary phosphate intake) augmented the increase in the TNF-α level by 6.24-fold (odds ratio [95% confidence interval]: 6.24 [1.12~34.92], p&lt;0.05). These results highlighted the conclusion that LP meals accompanied by a minimum dose of CaCO3 downregulated pro-inflammation by reducing CKD-MBD indicators which was triggered by decreasing dietary phosphate intake.

Background and Objective: There is a paucity of literature comparing unilateral instrumented transforaminal lumbar interbody fusion (UITLIF) with bilateral instrumented TLIF (BITLIF) regarding radiological alignment, including the coronal balance, even though UITLIF might have asymmetric characteristics in the coronal plane. This retrospective study aimed to compare the clinical and long-term radiological outcomes of 1-level UITLIF and BITLIF in lumbar degenerative diseases (LDD). Materials and Methods: Patients who underwent 1-level UITLIF with two rectangular polyetheretherketone (PEEK) cages or BITLIF with ≥ 5 years of follow-up at a single hospital were included. We compared the clinical and radiological outcomes between the UITLIF and BITLIF. Results: In total, 63 and 111 patients who underwent UITLIF and BITLIF, respectively, were enrolled. The median follow-up was 85.55 months (range: 60–130). The UITLIF group had a significantly shorter operation time (185.0 [170.0–210.0] vs. 225.0 [200.0–265.0], p &lt; 0.001) and lower estimated blood loss (300.0 [250.0–500.0] vs. 550.0 [400.0–800.0], p &lt; 0.001) than BITLIF group. Regarding the clinical outcomes, there were no significant differences in the intermittent claudication score (p = 0.495) and Kirkaldy–Willis criteria (p = 0.707) at 1 year postoperatively. The interval changes of the local coronal Cobb angle at the index level, L1-S1 lordotic angle, and coronal off-balance from the immediate postoperative radiograph to the last follow-up were not significantly different (p = 0.687, p = 0.701, and p = 0.367, respectively). Conclusion: UITLIF with two rectangular PEEK cages is a viable option for providing comparable clinical outcomes and radiological longevity to BITLIF in 1-level LDD. In addition, UITLIF has advantages over BITLIF in terms of operative time and blood loss.

This work presents a new model to obtain the minimum cost design for a rectangular isolated footing, taking into account that the column is located in any part of the footing. The methodology is developed by integration to obtain the moments, bending shear and punching shear according to the American Concrete Institute ACI 318-14. This document presents the simplified and precise equations of the four moments, four bending shears and one punching shear acting on the footing. Some designs have been developed by the trial and error method to determine the footing dimensions, and later the thickness and steel area of the footing are obtained. Some authors present the minimum cost design for a rectangular isolated footing taking into account that the column is located in the center of gravity of the footing, and other authors present very complex algorithm. Numerical examples are presented to obtain the minimum cost design of rectangular isolated footings under biaxial bending, and some results are compared with those of other authors considering the same conditions. The new model presents a smaller contact area with the soil and a lower design cost than those presented by other authors.

Steam boiler has a significant role in the industrial sector. The failure in boiler tubes significantly reduces the availability of the plant. Furthermore, deposits on the inner tube wall contribute to such failure by changing the thermal resistance of the wall, which causes a significant increase in the tube wall's temperature and, consequently, lower allowable stress. The presented thermal-fluid model is developed for the water tube. The model is implemented using ANSYS FLUENT to estimate the wall maximum water tube wall temperature considering the deposits layer and then determine the minimum thickness of the tube wall via ASME standards to assure safe operation. The model is verified via a mesh independence test. The minimum tube thickness is recommended and justified given the thermo-mechanical performance of the water tubes at several operating loads of 50, 75, and 100 %. These loads are implemented by different convective heat transfer coefficients of flue gases under different deposit thicknesses, thermal conductivity, and flue gas temperature. The present work contributes to the literature by recommending the minimum thickness of the water wall tubes and highlighting the thermo-mechanical effect of the deposits on water tube resilience under different operating conditions.