This study aims to examine the non-volatile Particle Number (PN) emissions of a retrofitted Heavy-Duty Spark-Ignition (HD-SI) engine powered by liquefied petroleum gas (LPG) under both steady-state and transient conditions. The engine was tested under seven steady-state operating points to investigate the PN behavior and Particle Size Distribution (PSD) upstream and down-stream of the Three-Way Catalyst (TWC). This analysis intends to assess the impact of including particles with diameters ranging from 10 nm to 23 nm in the total particle count, a consideration for future regulations. The study employed the World Harmonized Transient Cycle (WHTC) for transient conditions to encompass the same engine working region used in the steady-state analysis. A Dekati FPS-4000 diluted the exhaust sample to measure the PSD and PN for particle diameters between 5.6 nm and 560 nm using the TSI-Engine Exhaust Particle Sizer (EEPS) 3090. Findings indicate that PN levels tend to increase downstream of the TWC under steady-state conditions in operating points with low exhaust gas temperatures and flows (equal to or less than 500 °C and 120 kg/h). Furthermore, the inclusion of particles with diameters between 10 nm and 23 nm leads to an increase in PN emissions by 17.70% to 40.84% under steady conditions and by an average of 40.06% under transient conditions, compared to measurements that only consider particles larger than 23 nm. Notably, in transient conditions, most PN emissions occur during the final 600 seconds of the cycle, linked to the most intense phase of the WHTC.

This study aimed to learn disturbance information to effectively control multiple small unmanned surface vehicles (USVs) for marine research purposes at sea. The learned disturbance information was used to investigate the control of multiple USV swarms based on the leading–following formation technique. Numerous studies have already been conducted on swarm control using drones in the air; however, there has been a paucity of studies on swarm control in the sea. Contrary to swarm control in aviation, the fluid density of the sea is high, and the environment is constantly changing; thus, a robot system would be significantly affected by disturbances. This ultimately influences the maintenance of swarm formations and the accomplishment of missions [1,2]. Therefore, it is difficult to control numerous moving objects while maintaining a formation at sea by using the existing aerial drone swarm control technology. To solve this problem, we learned a long short-term memory (LSTM) model with time-series marine environmental data to predict maritime disturbances. Thereafter, the model was applied to a mission-based position control algorithm of each USV constituting the swarm to design a marine unmanned floating vessel swarm control system that can be applied to various marine environments. Specifically, to effectively control numerous small USVs for marine research purposes, ocean currents are learned using the LSTM algorithm, and the predicted ocean currents are used to generate a swarm USV control system for USV formations. In this study, a control system model of several small USVs equipped with two rear thrusters and a front lateral thruster was designed. The LSTM algorithm was learned using the previous ocean current data, and the velocity of the following ocean currents was predicted. The predictions were then used as a system disturbance to determine the thrust of the controller. To measure ocean currents in the sea when each USV moves, the velocity, azimuth, and position (latitude, longitude) data from the GPS mounted on the USV were used to measure the velocity and direction of the hull's movement. Further, the flow rate was measured using a flow rate sensor on a small USV. The USV movement and position were controlled using an artificial neural network-PID (ANN-PID) controller. This study entailed a comparative analysis of the designed USV model results and those generated by the simulator, including the behavior control rule of the USV swarm and the path of the actual USV swarm at sea. It was verified that the effectiveness of the USV mathematical model and behavior control rules. By comparing the movement path of the swarm USV with and without the disturbance learning algorithm and ANN-PID control algorithm applied to the designed simulator, the position error and maintenance performance of the swarm formation were analyzed, and the application results were compared.

This study delves into hospital mobility, understood as an indicator of perceived service quality, across the Italian regions of Apulia and Emilia Romagna, utilizing logistic regression among machine learning techniques. The focus is on how structural, operational, and clinical variables impact patient perceptions of service quality, influencing their healthcare choices. Through the analysis of mobility trends with machine learning, significant differences between regions were uncovered, highlighting the influence of regional context on perceived quality. The integration of SHAP (SHapley Additive exPlanations) values into our analysis provided deeper insights into the logistic regression model, elucidating the specific contribution of each variable to perceived healthcare quality. This incorporation of SHAP values underscores the study's commitment to employing advanced, explainable AI techniques to enhance the interpretability and fairness of healthcare service evaluations. The choice of logistic regression elucidated the impact of specific variables on quality perception, offering essential insights for optimizing healthcare resource distribution and underscoring the importance of data-driven strategies to foster more equitable, efficient, and patient-centred healthcare systems. Contributing to the understanding of perceived quality dynamics within the healthcare context, the research paves the way for further investigations into enhancing accessibility and service quality, leveraging machine learning as a tool for improving healthcare services efficiency in diverse regional settings.

Objectives: To assess the short-term impact of a single global stretching session on plantar pressures and lumbar range of motion (RoM) over one week in sedentary university students. Design: A randomised controlled trial with two parallel groups. Participants: Sixty-four university students were randomly assigned to a stretching group or control group. The stretching group received a single session of global stretching and the control group remained seated for the same length of time as the stretching session. Main outcome measures: Lumbar RoM and plantar pressures were assessed before, immediately after, 48 hours after, and 7 days after intervention. Results: Group-by-time interaction was significant for lumbar lateral flexion (p = 0.044), right maximal pressure (p = 0.003), left maximal pressure (p = 0.008), right mean pressure (p = 0.025), left mean pressure (p = 0.002), and maximal pressure minus mean pressure in right foot (p = 0.007). The model with plantar pressures showed a significant difference for group-by-time interaction (p = 0.010).Conclusion: Global stretching seems to counteract the ill-effects of prolonged sitting up to seven days with respect to plantar pressure in standing without improving lumbar ROM

The new IoT/IoE (internet of things/everythings) paradigm and architecture permits to rethink about the way the Smart City infrastructures are designed and managed, on the other hand a number of problems have to be solved. In terms of mobility the cities that embrace the sensoring era can take advantage of this disruptive technology to improve the quality of life of their citizen, also thanks the rationalization in the use of their resources. In Sii-Mobility, a national smart city project on mobility and transportation, a flexible platform has been designed and here, in this paper, is presented. It permits to setup heterogeneous and complex scenarios that integrate sensors/actuators as IoT/IoE in an overall scenario of Big Data, Machine Learning and Data Analytics. A detailed and complex case-study has been presented to validate the solution in the context of a system that dynamically reverse the traveling direction of a road segment, with all the safety conditions in place. This case study composes several building blocks of the IoT platform, which demonstrate that a flexible and dynamic set-up is possible, supporting off-grid, security, safety, cloud and mixed solutions.

During public health events, Active Mobility (walking and cycling) plays an important role in securing residents' travel. To enhance the resilience of urban transportation, this article integrates the travel environment elements for walking and cycling and constructs a travel environment for Active Mobility evaluation index system. This article uses survey data from the main urban area of Harbin in the context of the COVID-19 pandemic in May 2022, and combines the Gradient Boosting Decision Tree (GBDT) and Impact-Asymmetry Analysis (IAA) methods to analyze the satisfaction of the travel environment for Active Mobility. It proposes strategies for optimizing the travel environment for Active Mobility, ensuring residents' travel during public health events, guiding them to adopt Active Mobility, and improving urban transportation resilience. This research shows that Active Mobility can enhance urban transportation resilience. In addition, there are differences in resident demand for walking and cycling environments in the travel environment for Active Mobility. Residents are more concerned about the comfort of the walking environment, while they prioritize the convenience of the cycling environment.

The use of unmanned aerial aircrafts (UAVs) is governed by strict regulatory frameworks that prioritize safety. To guarantee safety, it is necessary to acquire and maintain situational awareness (SA) throughout the operation. Existing Canadian regulations require pilots to operate their aircrafts in visual line-of-sight. Therefore, the task of acquiring and maintaining SA primary falls to the pilots. However, the development of aerial transport is entering a new era with the adoption of a highly dynamic and complex system known as advanced air mobility (AAM), which involves UAV operating autonomously beyond visual line-of-sight. SA must therefore be acquired and maintained primarily by each UAV through specific technologies and procedures. In this paper, we review these technologies and procedures in order to decompose the SA of the UAV in the AAM. We then use the system modeling language to provide a high-level structural and behavioral representation of the AAM as a system having UAV as its main entity. In a case study, we analyze one of the flagships UAVs of our industrial partner. Results show that this UAV doesn’t have all the technologies and methodologies necessary to achieve all the identified SA goals identified for the safety of the AAM. This work is a theoretical framework intended to contribute to the realization of the AAM, and we also expect to impact the future design and utilization of UAVs.

Active ageing is defined as the process of optimizing opportunities for physical, social and mental health to enable older people to take an active part in society without discrimination and to enjoy an independent and good quality of life. The World Health Organization assumed this as a process for increasing and maintaining an individual’s participation in activities to enhance his/her quality of life. In this survey, the authors addressed the following question: “Is assistive technology (AT) for mobility contributing to enhancement of lifelong capacity and performance?”. From June 2015 until February 2016, 96 community dwelling adults, AT users for mobility (powered wheelchairs, manual wheelchairs, lower limb prostheses, walkers, crutches and canes), aged 45-97, mean 67.02 +/- 14.24 years old, 56.3% female, were interviewed using the Psychosocial Impact of Assistive Devices Scale (P-PIADS), the Activities and Participation Profile related to Mobility (APPM) and demographics, clinical and questions about AT use and training. The participants’ profiles revealed moderate limitation and restrictions in participation, measured by the APPM (2.03). Most participants showed positive impact of AT; average scores obtained from the P-PIADS subscales were: Self-esteem 0.62, Competency 1.11 and Adaptability 1.10. P-PIADS total was 0.96, with the powered wheelchair users scoring the highest (1.53) and the walker users scoring the lowest (0.73). All subscales and P-PIADS total were positively correlated with the activities and participation profile. There was no relation between age and the psychosocial impact of AT or activities and participation profile. These results encourage the authors to follow these participants up for a lifelong intervention. To accomplish that aim, currently, the protocol is implemented at the AT prescribing centers in Coimbra, Portugal in order to assess the impact of AT on participation in society, one of the domains of the Active Ageing Index, a new analytical tool to help policy makers in developing policies for active and healthy ageing.

The open data market is growing, driven by laws requiring governments to make data publicly available. However, the true value of this market lies in the products and services derived from open data. In Slovenia, the open data market has been growing since 2015, especially in the field of mobility. Platforms such as Avtolog.si facilitate the retrieval of vehicle data via vehicle identification numbers, while tocen.si, ojpp.si, and brezavta.si aggregate mobility data, focusing on sustainable and micromobile public transportation services. These platforms use open government data and private sector open data, and are freely accessible. This study examines the use of open data in the Slovenian mobility applications and similar solutions developed in other countries. By mapping these applications, we gain valuable insights into potential advances in the field, and provide a useful resource for future developers worldwide. By focusing on the socio-economic impact of these innovations, the study identifies methods for evaluating such applications. This approach highlights how transforming open data into user-friendly products and services can deepen our understanding of their broader societal and economic benefits. While open data is valuable in its own right, its full transformative potential is realized through innovative products that support sustainable lifestyles and promote environmentally conscious behavior.

COVID-19 is the most severe health crisis of the 21st century. COVID-19 presents a threat to almost all countries world-wide. The restriction of human mobility is one of the strategies used to control the transmission of COVID-19. However, it has yet to be determined how effective this restriction is in controlling the rise in COVID-19 cases, particularly in major capital cities such as Jakarta, Indonesia. Using Facebook's mobility data, our study explores the impact of restricting human mobility on COVID-19 case control in Jakarta. Our main contribution is showing how the restriction of human mobility data can give important information about how COVID-19 spreads in different places. We proposed modifying a global regression model into a local regression model by accounting for the spatial and temporal interdependence of COVID-19 transmission across space and time. We applied Bayesian hierarchical Poisson spatiotemporal models with spatially varying regression coefficients. We estimated the regression parameters using an Integrated Nested Laplace Approximation. We found that the local regression model with spatially varying regression coefficients outperforms the global regression model based on DIC, WAIC, MPL, and R2 criteria for model selection. In Jakarta's 44 districts, the impact of human mobility varies significantly. The impacts of human mobility on the log relative risk of COVID-19 range from –4.445 to 2.353. The prevention strategy involving the restriction of human mobility may be beneficial in some districts but ineffective in others. Therefore, a cost-effective strategy had to be adopted.

Internal combustion engine (ICE) vehicles contribute significantly to the global warming through their immense quantity of CO2 emissions and are on the way to be replaced by zero emission alternative solutions. Several replacement techniques with scientifically sound performances are proposed for the propulsion equipment including the related supply chains from renewable sources, but they often cannot fulfill the huge demand quantitatively. The paper discusses the quantitative aspects of the real demand with the example of the actual automotive park in Switzerland and analyses different alternatives like conventional EV’s, fuel-cell vehicles or energetic chains based on sustainable fuels like e-methanol or synthetic solar fuels. The analysis comprises energy efficiency considerations.

This research focuses on the development of a foot-worn device to assist individuals with limited mobility in walking. The device aims to reduce the risk of accidents by closely moni-toring the wearer's movements and detecting potential hazards. It incorporates sensors, in-cluding the MPU6050 gyro sensor and KY-031 vibration sensor, to track the wearer's walking behavior. In case of abnormalities, such as falls, the device triggers an auditory alert and noti-fies the caregiver via LINE Notify. The system is controlled by the Node MCU ESP8266, enabling seamless integration with the Internet of Things (IoT). The objective of this study is to design an IoT system for medical assistance. The researchers created a prototype of a smart ankle device capable of detecting falls and sending notifications to the user's smartphone. The effectiveness of the notification system was evaluated using the Line Notify application. Re-sults demonstrated a successful detection of falls in 48 out of 50 trials, with two instances of false alarms during normal walking. The overall efficiency of the smart ankle device was 98%. In summary, the proposed smart ankle device demonstrates promising potential for var-ious applications in fall detection and safety alert systems. Further improvements and collab-orations with healthcare experts are recommended to enhance its performance and make it commercially viable. The device's connectivity and responsiveness to IoT systems are vital aspects to be considered. Future research should aim to develop additional features in collab-oration with physiotherapists and healthcare professionals to meet user requirements. The de-vice holds significant benefits in terms of fall detection and safety alerts, and efforts should be made to enhance its durability, robustness, and commercialization prospects.

It is shown by numerical modelling that anisotropic diffusion can compensate and even overcome diffusion broadening - the main limiting factor of devices working at atmospheric pressure. The thickness of ion clouds coming out of the ionisation chamber is reduced ~ 1000 times in the ADMA inlet increasing the resolution. This finding has a great potential that enables construction of a device with resolution close to that of currently available desktop ion separation devices – high pressure mass spectrometers, but with much lower cost of manufacture and with smaller dimensions. Comprehensive numerical modelling along with mathematical analysis of physical concepts enables reduction of the footprint and manufacturing costs. Modelling determined that the resolving power (RP) potential of the ADMA is greater than the RP of currently available on the market devices for the airport security market. The ADMA technology enables very fast detection of threats; at least 100 times faster than currently used in Ion Mobility Spectrometers (IMS). This potentially allows an increase in passenger throughput in airports.

The population’s mobility in urban areas is a necessary variable in the modeling of risk scenarios caused by atmospheric contamination. The inclusion of this concept makes static models more dynamic while considering people within a city to be an entity with complex mobility processes. We propose a conceptual and methodological tool to make the representation of the social, economic and territorial components, as well as the patterns in the population´s mobility to delimitate risk areas for human health by exposure of contaminants. In the volatile organic compounds (VOC), benzene, ethylbenzene, toluene and xylene (BTEX) are amongst the most dominant substances in fugitive vapor emissions in gas stations (GS). In urban areas, the exposure to BTEX by residential proximity and proximity to other facilities, which cause intra-urban agglomeration, can impact and affect human health. This model seeks to facilitate the focalization, identification and prioritization of risk areas by BTEX environmental contamination. This article goes beyond de conceptual framework. It suggests methodological and instrumental aspects to be applied in other cities. The government agencies must consider these results when establishing rules, permissions and procedures to reduce environmental pollution for managing the risk in a complex urban environment.

(1) The incidence of ankyloglossia ranges from 0.02 to 10.7%. The literature describes the effect of ankyloglossia on selected dysfunctions of the stomatognathic system, however no studies could be found reporting the influence of ankyloglossia on the occurrence of several disorders in a group of subjects. The aim of the present study was to assess the effect of lingual frenulum on swallowing, speech, occlusion, and periodontal status; (2) Methods: The subjects were 172 patients, 86 with ankyloglossia (study group) and 86 with normal tongue frenulum (control group). In all subjects, the length of tongue frenulum, the type of swallowing, tongue mobility, occlusion, periodontal status and speech abnormalities were assessed; (3) Results: All subjects from the control group and all those with mild ankyloglossia showed normal tongue mobility. A limited tongue mobility was found in 29.4% subject with moderate and in 70.6% subjects with severe ankyloglossia. Rhotacism was observed in 21.3% subjects with normal frenulum, in 2.1% with mild, 38.3% with moderate, and 38.3% with severe ankyloglossia. Malocclusion or crowding was diagnosed in subjects with mild, moderate and severe ankyloglossia in 7.4%, 33.9% and 20.7% subjects (total 62%), respectively, whereas in the control group - in 21.6% subjects. No abnormalities in the periodontium in the area of the lingual surfaces of the crowns of the lower central incisors were found in any of the examined persons. Among patients with infantile type of swallowing 24.4% had a normal length of the tongue frenulum, 11.1% - mild, 28.9% - moderate, and 35.6 - severe ankyloglossia. Among patients presenting a mature type of swallowing 58.7% had a normal length of the frenulum; (4) Conclusions: 1.A shortened tongue frenulum correlates with “infantile swallowing pattern”. 2. Moderate or severe ankyloglossia significantly limits tongue mobility. 3. Short tongue frenulum is related to speech disorders.

Australian regional areas are now receiving significant numbers of migrants from the African continent. Predominantly Anglo-Saxon communities perceive these ‘newcomers’ as physically and culturally different. Asking, however, how African migrants themselves construct relationships with local communities and build a sense of belonging in regional and rural areas is a very different question. This paper explores South Sudanese migrants’experiences conceptualising their sense of belonging in a small county town: Castlemaine, Victoria. Focus group discussions show that even with the welcoming atmosphere and support from the local community, South Sudanese migrants are still attracted to metropolitan environments that have greater diversity, feeling more at home in such settings. Using the theoretical background of a stranger, this paper argues the cities allow strangers be un-noticed letting them feel at ‘home’. Findings from the study show settings with greater diversity encourage negotiating difference openly and easing power imbalances among different groups.Finally, the locality of Castlemaine, within easy commuting distance to metropolitan Melbourne and suburbs, is considered in relation to hypermobility reducing the capacity to construct ‘bridging capital’ within such local communities.

Cross-cultural mobility is a phenomenon that is increasingly growing, and the resulting stress has become a severe health issue. Thus, we conducted a systematic review of articles reporting research on stress measures of cross-cultural mobility or acculturative stress, emphasizing its internal structure. We adopted the PRISMA procedures for scoping reviews (e.g., searching articles in databases), resulting in the inclusion 20 articles in the final analysis that present evidence of validity based on the internal structure of 16 measures. The most common factors identified were related to cultural stressors, language stressors, and discrimination stressors. After analyzing a cross-cultural mobility stress concept implicit in the definitions used in the articles, we found that most measures of acculturative stress did not evaluate it according to the Stress and Coping Model of Lazarus and Folkman. Most measures only focused on part of the phenomena (some estimated the stressors, others the coping strategies). Few took into account the physiological and psychological responses to internal or external stressors, and even fewer considered its positive aspects (eustress). Consequently, it is pivotal to develop measures that take into account the multiple dimensions of the cross-cultural mobility stress. Other results (e.g., validity evidence of the measures) and limitations of this systematic scoping review are presented and discussed.

Charcot-Marie-Tooth (CMT) disease is the most commonly inherited neurological disorder, defined by progressive deterioration of the peripheral nerves. Clinical manifestations of CMT mutations are typically limited to peripheral neurons, the longest cells in the body. Currently, mutations in at least 80 different genes are associated with CMT and new mutations are regularly being discovered. A large portion of the proteins mutated in axonal CMT have documented roles in mitochondrial mobility. This suggests that trafficking defects may be a common underlying mechanism in CMT. This review will focus on the potential role of altered mitochondrial mobility in the pathogenesis of axonal CMT, highlighting the challenges and opportunities to this “impaired mobility” model of the disease.

The proposed method deals with the problem of data privacy and sharing when processing personal mobility tracking data. Previous methods concentrate on producing highly detailed data on short-term and restricted areas, e.g. for autonomous driving scenarios. Another possibility consists of city-wide scales and beyond, that are used to predict general traffic flows. The presented approach takes the tracked mobility behavior of individuals to create coherent new mobility data that reflects the long-term mobility behavior of the person, guaranteeing location persistency and sound embedding within the point-of-interest structure of the observed area. After an analysis and clustering step with the original data, the area is distributed into a geospatial grid structure (H3 is used here), and the neighborhood relationships between the grids are interpreted as a graph. A feed-forward-autoencoder and a graph encoding-decoding network generate a latent space representation of the area. The original clustered data is associated with their respective H3 grids. With a greedy algorithm approach and concerning privacy strategies, new combinations of grids are top-level patterns for individual mobility behavior. Concrete locations are found and connected within the grids based on the original data. The described method is then applied to a study with 1000 participants from the city of Munich in Germany, and the results are described, showing the application of the approach in generating synthetic data, enabling further research on individual mobility behavior and patterns. The result is a sharable dataset on the same abstraction level as the input data, which makes it interesting, particularly for machine learning applications.

Mobility as a Service (MaaS) is an innovative transport concept, anticipated to provide travelers with different kinds of travel services, more sustainable than a private car, in a simpler, packaged way. It combines different transport modes to offer a tailored mobility package, like a monthly mobile phone contract. The rapid development of intelligent transportation system and the shared economy has speeded up the development of MaaS in these years. In this paper, we aim at classifying the existing research on MaaS and the characteristics of MaaS into different categories, in order to answer the following questions after reviewing the existing literature: What is MaaS? Who are the main actors in MaaS? How can MaaS be implemented? Why should it be implemented? Where will MaaS end up in this wave of disruption? When we talk about MaaS, what are we focusing on? What is the future leading frequency of MaaS? Finally, based on the existing literature, we envision the leading future of MaaS.

According to the cognitive radio (CR) paradigm, the efficient use of the radio spectrum is achieved by performing four main functions: spectral perception, spectral mobility, decision-making, and cooperation. In this work, a multivariable algorithm that considers geographic mobility (GM) is presented. The decision-making process includes a feedback mechanism for the dynamic selection of reservation channels in a wireless network with cognitive capabilities. Geographic mobility plays a crucial role in how radio takes advantage of its environment; however, it has been scarcely explored in the literature. In the present work, geographic mobility tests were carried out involving the interaction of CR and primary users (PU), where a measurement of the latency time of the proposed algorithm called: Algorithm for Decision-Making with Geographic Mobility (ATDeMoGeo) was evaluated and compared with other algorithms such as: Dijkstra's Algorithm, Analytic Hierarchical Process (AHP), Fuzzy Analytic Hierarchical Process (FAHP) and Decision-Making Algorithm with Modified Dijkstra (ATDDiM). It was found that the proposed algorithm is robust and that it considerably reduces the latency time to accurately determine the best communication channels, thanks to the decision-making function implemented to establish which channels the CRs can occupy. For the selection of the best reserve channels, a series of criteria were considered, such as: signal-to-interference plus noise ratio (SINR), bandwidth (BW), probability of channel availability (AP), estimated channel time of availability (ETA) using the random waypoint mobility model (RWPM). These criteria are evaluated for two types of service, i.e., real time (RT) and best effort (BE). For the evaluation and validation of the ATDeMoGeo algorithm, a network with cognitive characteristics in NS-3 was simulated. The simulation scenarios consisted of a base station (BS) with mobile CRs and PUs. Based on the previous criteria, i.e., BW, SINR, AP and ETA, the BS assesses the spectrum occupancy information obtained by the CRs. The results show that the proposed algorithm can be used without problem for the proposed scenarios with higher speed and accuracy for the selection of better communication channels.

In Bangladesh, microcredit program has been in function for almost half a century. Though popularly termed as a tool for poverty alleviation and women empowerment, criticism about microcredit program’s actual effectiveness isn’t new. This study attempts to evaluate the impact of such programs by measuring borrowers’ social mobility. Using a multidimensional approach, indicators like household income, economic susceptibility, living conditions, consumption pattern, children’s education, healthcare facilities, women’s participation in decision-making were taken into account for measurement. Quantitative method was used. Based on a non-probability sampling, 107 microcredit borrowers were selected for conducting interview schedules who live in a rural, a semi-urban and an urban area. Statistical analysis of data reveals that those who have been taking loans for several number of years have all managed to increase their income level to a variety of extent, but only those have gained some sort of mobility who have been taking loans for more than 4-5 years and have taken 5 times or more. Few of them have actually moved from microcredit to become a microfinance client by taking bigger amount of loans and having savings. Positive responses about the indicators being used in the study were found among the handful of those who have mobilized significantly. In true sense, most of the borrowers are stuck at the bottom end of socio-economic ladder and are struggling to manage a better living standard.

This study empirically investigates the complex interplay between the severity of the coronavirus pandemic, mobility changes in retail and recreation, transit stations, workplaces, and residential areas, and lockdown measures in 88 countries of the word. To conduct the study, data on mobility patterns, socioeconomic and demographic characteristics of people, lockdown measures, and coronavirus pandemic were collected from multiple sources (e.g., Google, UNDP, UN, BBC, Oxford University, Worldometer). A Structural Equation Modeling (SEM) technique is used to investigate the direct and indirect effects of independent variables on dependent variables considering the intervening effects of mediators. Results show that lockdown measures have significant effects to encourage people to maintain social distancing. However, pandemic severity and socioeconomic and institutional factors have limited effects to sustain social distancing practice. The results also explain that socioeconomic and institutional factors of urbanity and modernity have significant effects on pandemic severity. Countries with a higher number of elderly people, employment in the service sector, and higher globalization trend are the worst victims of the coronavirus pandemic (e.g., USA, UK, Italy, and Spain). Social distancing measures are reasonably effective at tempering the severity of the pandemic.

According to the changed operative conditions due to lockdown and successive reopening a number of facts can be analysed. The main effects have been detected on: mobility, environment, social media and people flows. While in this first report only mobility, transport and environment are reported. The analysis performed identified a strong reduction of the mobility and transport activities, and in the pollutants. The mobility reduction has been assessed to be quite coherent with respect to what has been described by Google Global mobility report. On the other hand, in this paper a number of additional aspects have been put in evidence providing detailed aspects on mobility and parking that allowed us to better analyze the impact of the reopening on an eventual revamping of the infection. To this end, the collected data from the field have been compared from those of google and some considerations with respect to the Imperial college Report 20 have been derived. For the pollutant aspects, a relevant reduction on most of them has been measured and rationales are reported.

Social distancing policies put in place during COVID-19 epidemic in addition to helping to limit the spread of the disease also contributed to improving urban air quality. Here we show a decrease in air pollutant concentration as a consequence of mobility reduction in São Paulo during the containment measure which began on 22^nd March 2020. When comparing to foregoing weeks to equivalent periods of 2019, the concentration of most air pollutants sharply decreased in the first days of mobility restriction, to then increase again after government officials downplayed the threat of the disease. This trend is also followed by a decrease in hospital admissions by SARS-influenza. Therefore, despite the great economic and social unrest caused by the pandemic, this unique situation shows that large-scale mobility reduction policy had a significant impact on air quality, benefiting, directly and indirectly, the public health system.

Recent years have seen a proliferation of platform-based “shared mobility services” (SMS) such as car-, bike-, and e-scootersharing in many cities in Germany and around the world. At the same time, these services have become the subject of intense debates: Are they replacing private car travel, thus contributing to sustainable mobility in cities? Or are they drawing users away from public transit and cycling while obstructing public space? From the perspective of sustainable mobility politics it seems far from clear which role these new services could play in transitioning to a less car-centric mobility system. While a number of potential effects and ensuing governance issues of shared mobility services (e.g. regarding questions of equitable access, data governance, the role of public versus private actors) have already been studied this article explores the role of shared mobility services (SMS) in triggering system dynamics and feedback loops in the context of sustainability transitions. The article connects questions regarding the sustainability effects of “shared mobility services” with the role of “push” measures to reduce private car traffic in cities. Using a theoretical framework from socio-technical transitions research and from the sociology of technology it describes the recent growth of shared mobility services in Berlin as an example of the upscaling dynamics of socio-technical niche innovations. Drawing on a series of workshops with mobility service providers and representatives of public authorities it analyses the potential for conflict as well as for coalition building between service providers and public authorities. Based on the theoretical concept of the role of feedback loops and windows of opportunity for transitions it shows how the market growth of shared mobility services added momentum to an already ongoing political debate over the legitimate use of public space in Berlin. Against this backdrop the article shows how growing numbers of car-, bike-, and e-scootersharing vehicles could open up windows of opportunity for re-distributing space away from private cars. The article concludes that supporting and regulating SMS will be key to steering their growth into the direction of sustainability.

During the past few years many projects and initiatives were undertaken deploying and testing automated vehicles for public transportation and logistics. However in spite of their ambition, all of these deployments stayed on the level of elaborated experimentation deploying no more than 4 maximum 5 AVs in rather small sites (few Kms of roads) and never really reached the level of large scale “commercial” deployment of transport services. The reasons for this are many, but the most important being the lack of economically viability and commercially realistic models, the lack of scalability of the business and operating models, and the lack of inclusive citizen/user centric services required for the large end-user acceptation and adoption of the solutions. In this paper, based on the experience gained in the H2020 AVENUE project, we present the missing pieces of the puzzle, ad which will be addressed in the Horizon Europe project ULTIMO.

With its sights set on sustainable development, transport policy finds itself confronted with the challenge of convincing people to abandon the current path of growth and instead use small, slower vehicles with a reduced range in the future. The problem with this goal is that people's mental structures are shaped by the car ensconced in their heads. Thinking in other terms hardly seems possible; moreover, many of the products classified as vehicles, but smaller in scale than the "car" and that already exist, remain unknown, nor can they be tried out - they are quite literally nowhere to be seen. In light of this situation, the German Federal Environmental Foundation has commissioned a feasibility study to explore the establishment of a World of Experience (Erlebniswelt) of sustainable urban mobility - the EcoMobileum®. Here, the aim is to open up the horizons of a new culture of mobility in order to get people excited about the transformation of mobility.

Substantial research is required to ensure that micro-mobility ride sharing provides a better fulfillment of user needs. This study proposes a novel crowdsourcing model for the ride-sharing system where light vehicles such as scooters and bikes are crowdsourced. The proposed model consists of three entities: suppliers, customers, and a management party responsible for receiving, renting, booking, and demand matching with offered resources. It can allow suppliers to define the location of their private e-scooters/e-bikes and the period of time they are available for rent. Using a dataset of over 9 million e-scooter trips in Austin, Texas, we ran an agent-based simulation six times using three maximum battery ranges (i.e., 35, 45, and 60 km) and different numbers of e-scooters (e.g., 50 and 100) at each origin. Computational results show that the proposed model is promising and might be advantageous to shift the charging and maintenance efforts to a crowd of suppliers.

In this research, users’ perception towards Universal Mobility in old core cities of India has been critically analyzed. Despite Universal Design guidelines from the United Nations and Union Government of India, old cities in India are seldom having Universal Mobility, in effect endangering the lifestyle of senior citizens and differently-abled people. The core of Kolkata Municipal Corporation in Kolkata, India has been considered as a case example for this research. This research has considered three types of data sets for analysis. First, the authors interviewed 310 respondents from the Indian design fraternity, with the objective of understanding their opinion on the concept of Universal Design. In the next investigative study of 125 respondents from different wards of Kolkata Municipal Corporation, the purpose was to comprehend people’s perception about walkability and mobility in an old Indian city. In the last visual survey of a stretch in Central Kolkata, the focus was identifying the hindrance in Universal Mobility in an old city core of Indian origin. Significant dissatisfaction was found in walkability amongst all user groups; which is linked to poor infrastructural conditions. Furthermore, accessing public transportation is difficult due to improper waiting facilities. However, the design fraternity in India suggests the need of separate accessibility guidelines for old and new cities in India. The design fraternity also recommends a customized rating system for accessing Universal Design. The result of this study indicates a need of recognizing the difficulty in imparting Universal Mobility in old core cities in India. This information can be used for preparing an Access Audit Checklist through Architectural Planning, which is the first step in proposing a framework for Universal Mobility in old core cities in India.

The biophysical consequences of nanoscale curvature have been challenging to resolve due to size-dependent membrane behavior and the experimental resolution limits imposed by optical diffraction. Recent advances in nanoengineering and super-resolution techniques have enabled new capabilities for creating and observing curvature. In particular, draping supported lipid bilayers over lithographically patterned substrates provides a model system for endocytic pits. The experiments and simulations presented below describe the possible detection of membrane curvature through fluorescence recovery after photobleaching (FRAP), fluorescence correlation spectroscopy (FCS), single particle tracking (SPT), and polarized localization microscopy (PLM). FRAP and FCS depend on diffraction-limited illumination and detection. In particular, a simulation of FRAP shows no effects on lipids diffusion due to a 50 nm diameter membrane bud at any stage in the budding process. Simulated FCS demonstrated small effects due to a 50 nm radius membrane bud that was amplified with curvature-dependent lipid mobility changes. However, PLM and SPT achieve sub-diffraction-limited resolution of membrane budding and lipid mobility through the identification of the single-lipid positions with ≤15 nm spatial and ≤20 ms temporal resolution. By mapping the single-lipid step lengths to locations on the membrane, the effects of curvature on lipid behavior have been resolved.

This article introduces an analytical framework that interprets individual measures of entropy-based mobility derived from mobile phone data. We explore and analyze two widely recognized entropy metrics: random entropy and uncorrelated Shannon entropy. These metrics are estimated through collective variables of human mobility, including movement trends and population density. By employing a collisional model, we establish statistical relationships between entropy measures and mobility variables. Furthermore, our research addresses three primary objectives: firstly, validating the model; secondly, exploring correlations between aggregated mobility and entropy measures in comparison to five economic indicators; and finally, demonstrating the utility of entropy measures. Specifically, we provide an effective population density estimate that offers a more realistic understanding of social interactions. This estimation takes into account both movement regularities and intensity, utilizing real-time data analysis conducted during the peak period of the Covid-19 pandemic.

This article proposes a particular strategy to proceed with a progressive electrification of public transport systems in cities. Starting from a bus operation model, the possible electrification of two routes is analysed, one urban and another extra-urban in the city of Pisa. An estimate is made of the energy uses associated with certain operating modes. The maximum level of consumption is estimated at approximately 280 kWh per day per bus for the urban route and excluding some special days, less than 215 kWh per day for the extra-urban route, for which a hybrid bus is proposed. Starting from an estimate of the daily consumption for the management of the two routes, the sizing of a photovoltaic system distributed on some modular shelters which serves to power the same routes is carried out. The resulting system has a power of the order of 190-200 kW. The modular solution is also outlined, and an installation is proposed. The analyzed case lends itself to being easily replicated.

The transition to sustainable mobility is a recognized socio-economic and environmental challenge, particularly among young adults in low- and middle-income countries (LMICs). This paper addresses the lack of comprehensive research on mobility patterns for LMICs by examining the travel patterns of students, staff, and lecturers at the National Advanced School of Public Works, Yaoundé (NASPW) to understand transport mode choices and barriers to the use of public and active transport modes. Data was collected through online questionnaires from 425 participants. Findings revealed that most students (27.5%) used multiple modes of transport, with moto-taxis being the most common (21%). Lecturers primarily used private cars (50%), while staff relied on taxis or multiple modes (33%). Accessibility, vehicle speed, and flexibility appeared as the most important reasons for the preferred modes of transport. Barriers included long waiting times and traffic congestion for public transport, and distance and inadequate infrastructure for active mobility. The usage of public transportation was encouraged by its affordability and reduced travel time, whilst active options were preferred due to their cost savings and health benefits. To promote sustainable mobility for campus travel, it is crucial to encourage active modes, develop mass transport systems, and raise awareness through symposiums and conferences among students and staff.

The research methods were used to investigate the following questions: Does a mobility training intervention change tissue stiffness, joint range of motion, and compensate for possible imbalances? Do the interventions influence the pressure pain threshold and the overall well-being?

Drainage divide is a dynamic feature that migrates in response to tectonic activity. The asymmetric uplift between two adjacent basins causes the divide migration from a slower to faster uplift area. Sado Island, Japan, has been affected by southeastward tilting uplift since ca. 300k years. Despite the faster uplift on the northwest, the main divides have existed on the southeast side of the geometric center of the island, with no other feature suggesting tectonic inversion of the tilting direction. In this study, we conducted a DEM-based investigation that focused on divide migration. A spectrum from very inactive to active divide migration in the northwest. Regardless of their position, actively migrating divides are comprehensible, but inactive divides located in a relatively slow uplift area remain unclear. We concluded that some divides slowed down owing to the local balance of erosion rates across the divides, not implying the balance between uplift and river erosion at the basin scale, reflecting disequilibrium in river longitudinal profiles. The main divides of Sado have presumably continued to slowly migrate toward the faster uplift area; however, they are most likely to have never overcome the moving geometric center owing to land expansion at the seacoast due to asymmetric uplift.

Rapid advancements in the fifth generation (5G) communication technology and mobile edge computing (MEC) paradigm lead to the proliferation of unmanned aerial vehicles (UAV) in urban air mobility (UAM) networks, which provide intelligent services for diversified smart city scenarios. Meanwhile, the widely deployed internet of drones (IoD) in smart cities also brings up new concerns on performance, security, and privacy. The centralized framework adopted by conventional UAM networks is not adequate to handle high mobility and dynamicity. Moreover, it is necessary to ensure device authentication, data integrity, and privacy preservation in UAM networks. Thanks to characteristics of decentralization, traceability, and unalterability, Blockchain is recognized as a promising technology to enhance security and privacy for UAM networks. In this paper, we introduce LightMAN, a lightweight microchained fabric for data assurance and resilience-oriented UAM networks. LightMAN is tailored for small-scale permissioned UAV networks, in which a microchain acts as a lightweight distributed ledger for security guarantees. Thus, participants are enabled to authenticate drones and verify the genuineness of data that is sent to/from drones without relying on a third-party agency. In addition, a hybrid on-chain and off-chain storage strategy is adopted that not only improves performance (e.g,.latency and throughput) but also ensures privacy preservation for sensitive information in UAM networks. A proof-of-concept prototype is implemented and tested on a Micro Air Vehicle Link (MAVLink) simulator. The experimental evaluation validates the feasibility and effectiveness of the proposed LightMAN solution.

Coupled Delft3D-object model has been developed to predict object’s mobility and burial on sandy seafloor. The Delft3D model is used to predict seabed environment such as currents, waves (peak period, significant wave height, wave direction), water level, sediment transport, and seabed change, which are taken as the forcing term to the object model consisting of three components: (a) object‘s physical parameters such as diameter, length, mass, and rolling moment, (b) dynamics of rolling cylinder around its major axis, and (c) empirical sediment scour model with re-exposure parameterization. The model is compared with the observational data collected from a field experiment from 21 April to 23 May 2013 off the coast of Panama City, Florida funded by the Department of Defense Strategic Environmental Research and Development Program. The experimental data contain both objects’ mobility using sector scanning and pencil beam sonars and simultaneous environmental time series data of the boundary layer hydrodynamics and sediment transport conditions. Comparison between modeled and observed data clearly show the model capability.

The ongoing COVID-19 global pandemic is affecting every facet of human lives (e.g., public health, education, economy, transportation, and the environment). This novel pandemic and citywide implemented lockdown measures are affecting virus transmission, people’s travel patterns, and air quality. Many studies have been conducted to predict the COVID-19 diffusion, assess the impacts of the pandemic on human mobility and air quality, and assess the impacts of lockdown measures on viral spread with a range of Machine Learning (ML) techniques. This review study aims to analyze results from past research to understand the interactions among the COVID-19 pandemic, lockdown measures, human mobility, and air quality. The critical review of prior studies indicates that urban form, people's socioeconomic and physical conditions, social cohesion, and social distancing measures significantly affect human mobility and COVID-19 transmission. During the COVID-19 pandemic, many people are inclined to use private transportation for necessary travel purposes to mitigate coronavirus-related health problems. This review study also noticed that COVID-19 related lockdown measures significantly improve air quality by reducing the concentration of air pollutants, which in turn improves the COVID-19 situation by reducing respiratory-related sickness and deaths of the people. It is argued that ML is a powerful, effective, and robust analytic paradigm to handle complex and wicked problems such as a global pandemic. This study also discusses policy implications, which will be helpful for policymakers to take prompt actions to moderate the severity of the pandemic and improve urban environments by adopting data-driven analytic methods.

Taekwondo has evolved from a traditional martial art into an official Olympic sport. This study introduces a novel action recognition model tailored for Taekwondo unit actions, utilizing joint motion data acquired via wearable inertial measurement unit (IMU) sensors. The utilization of IMU sensor-measured motion data facilitates the capture of the intricate and rapid movements characteristic of Taekwondo techniques. The model, underpinned by a conventional convolutional neural network (CNN)-based image classification framework, synthesizes action images to represent individual Taekwondo unit actions. These action images are generated by mapping joint motion profiles onto the RGB color space, thus encapsulating the motion dynamics of a single unit action within a solitary image. To further refine the representation of rapid movements within these images, a time-warping technique was applied, adjusting motion profiles in relation to the velocity of the action. The effectiveness of the proposed model was assessed using a dataset compiled from 40 Taekwondo experts, yielding remarkable outcomes: an accuracy of 0.998, precision of 0.983, recall of 0.982, and an F1-score of 0.982. These results underscore the time-warping technique's contribution to enhancing feature representation, as well as the proposed method's scalability and effectiveness in recognizing Taekwondo unit actions.

This work targets the development of a mobility control system for high-speed series hybrid electric tracked vehicles, which operate with independent traction motors for each track. The scope of the research encompasses the modeling of the series hybrid powertrain specific to military tracked vehicles, as well as an in-depth analysis of their dynamic behavior. Subsequently, the study conducts a critical review of the mobility control approaches sourced from literature, identifying key techniques relevant to high-inertia vehicular applications. Building on the foundational models, the study puts forward a robust closed-loop mobility control system aimed at ensuring precise and stable off-road vehicle operations. The system's resilience and adaptability to a variety of driving conditions are emphasized, with a particular focus on handling maneuvers such as steering and pivoting, which are challenging operations for tracked vehicle agility. The performance of the proposed mobility control system is tested through a series of simulations, covering a spectrum of operational scenarios. These tests are carried out in both offline simulation settings, which permit meticulous fine-tuning of system parameters, and real-time environments that replicate actual field conditions. The simulation results demonstrate the system's capacity to improve vehicular response and highlight its potential impact on the future designs of mobility control systems for the heavy-duty vehicle sector, particularly in defense applications.

The COVID-19 pandemic brought about a significant change in mobility habits within cities, with a significant decrease in the use of collective urban transport that has only been partially and unevenly reversed. To recover the previous rates of use, many cities are analyzing which characteristics of the urban transport network are hindering this recovery process in order to design actions to promote sustainable mobility. This article shows a study carried out in the city of Almería (Spain), where the operation variables of the municipal bus network have been analyzed (frequency, average vehicle occupancy, length of the lines, urban or suburban character, circularity, nodality or intermodality) to detect what aspects are more determinant on the number of users recovered. The results show that the lines that have recovered the most users in average are suburban lines, as well as the nodal lines that serve key centroids such as the university. Thus, the dependence of users on public transport would be the most important determinant in recovery, more than other variables representative of the service´s intrinsic quality. This result shows that, without compromising the necessary quality of the service, the restrictions on less sustainable transportation alternatives will be those that, to a greater extent, allow for the prompt recovery of the space lost by urban public transportation.

The burgeoning field of Urban Air Mobility (UAM) promises transformative solutions to urban transportation challenges, with the potential to revolutionize cargo logistics in metropolitan areas. This research investigates the role of tiltrotor technology as a pivotal enabler of seamless UAM integration for efficient cargo transportation within urban environments. The study delves into the existing challenges within UAM, such as infrastructure limitations and the need for adaptable aerial vehicles that can navigate confined spaces while maintaining payload capacity. Tiltrotor Unmanned Aerial Vehicles (UAVs) are examined as a solution to these challenges due to their unique capabilities, combining vertical takeoff and landing (VTOL) with efficient forward flight. This research evaluates the potential of tiltrotor UAVs for urban cargo transportation, focusing on their operational efficiency, safety, and economic viability. Furthermore, the study explores the potential impact of tiltrotor technology on urban cargo logistics, considering factors such as reduced congestion, shorter delivery times, and environmentally sustainable operations. Real-world case studies and practical implementation strategies are discussed, shedding light on the importance of integration of tiltrotor UAVs into existing cargo transportation networks.The findings of this research underscore the transformative potential of tiltrotor technology in enhancing UAM for cargo transportation within urban areas. The study contributes valuable insights to the ongoing discourse on UAM integration and lays the groundwork for future developments in autonomous aerial cargo delivery systems.

Functional mobility assessments (i.e., Timed Up and Go) are commonly used clinical tools for mobility and fall risk screening in the aging population. In this work, we proposed a new Mixed Reality (MR)-based assessment that utilized a Microsoft HoloLens^TM headset to automatically lead and track the performance of functional mobility tests, and subsequently evaluated its validity in comparison with reference inertial sensors. Twenty-two healthy adults (10 older, 12 young) participated in this study. An automated functional mobility assessment app was developed based on the HoloLens platform. Mobility performance was recorded with the headset built-in sensor and validated with reference inertial sensor (Opal, APDM) taped on the headset and lower back. Results indicate vertical kinematic measures by HoloLens was in good agreement with the reference sensor (Normalized RMSE ~ 10%). Additionally, the HoloLens-based test completion time was in perfect agreement with clinical standard stopwatch measure. Overall, our preliminary investigation indicates that it is possible to use an MR headset to automatically guide users to complete common mobility tests with good measurement accuracy, thus it has great potential to provide objective and efficient sensor-based mobility assessment.

Immobility during hospitalization is widely recognized as a contributor to deconditioning, functional loss, and increased need for institutional post-acute care. Several studies have demonstrated that inpatient walking programs can mitigate some of these negative outcomes, yet hospital mobility programs are not widely available in U.S. hospitals. STRIDE is a supervised walking program for hospitalized older adults that fills this important gap in clinical care. Herein we describe how STRIDE works and how it is being disseminated to other hospitals using the Replicating Effective Programs (REP) framework. Guided by REP, we define core components of the program and areas where the program can be tailored to better fit the needs and local conditions of its new context (hospital). We describe key adaptations made by 4 hospitals who have implemented the STRIDE program and discuss lessons learned for successful implementation of hospital mobility programs.

Some studies investigated the relationship between frequency domain analysis of heart rate variability and the cognitive performance at the Stroop task. We propose a combined assessment also of trunk mobility in 72 healthy women to investigate the relationship between cognitive, cardiac and motor variables based on a principal component analysis. We also assessed the change on this result after an intervention of two months aiming at improving the perception-action link. At baseline, the PCA correctly identified 3 components: one related to cardiac variables, one to trunk motion and one to the performance of Stroop task. After the intervention, only two components were found with trunk symmetry and range of motion, accuracy and time to complete the Stroop task and low frequency heart rate variability aggregated in a single component by PCA. It suggested that this protocol was effective in investigating the embodied cognition and we defined this approach as “embodimetrics”.

In response to growing industrial demands, necessitated by larger ships and increased cargo volumes, many port authorities worldwide are undertaking a significant expansion of their infrastructure to increase their capacity. Significant expansion raises challenges such as potential congestion and environmental concerns, especially for port located in urban area as the case study explored in this paper. To address these issues, the study employs a combination of scenario analysis developed in collaboration with the port authority and logistic system simulation. This approach assesses the capacity of existing access gates to handle the increased trucking traffic and optimizes the unloading process of construction trucks at a new terminal. Key findings suggest that while the current gate capacities are adequate, optimizing unloading times at the new terminal is critical to prevent road congestion in urban area before the gate and reduce negative impacts such as sound and atmospheric pollution. The study advocates for an appointment system during peak hours to manage traffic flow effectively and underscores the importance of collaboration between the city and port authorities in managing truck traffic to mitigate congestion on the city side. Nonetheless, the study recognizes certain constraints, including the incomplete evaluation of the influence of intermodal transport on truck traffic. Furthermore, the study emphasizes the need for future research to consider the correlation between vehicle numbers and service levels, aiming to effectively adjust the time in the system.

The study proposes planning independent children's mobility through geoinformation technologies for listening to children. This research assumes that children’s values and expectations must be considered in city planning. A bibliographic review identifies 15 indicators which make spaces safe and attractive for children to circulate and play. Thematic maps of the indicators are prepared, integrated by Multicriteria Analysis by Weights of Evidence, according to the hierarchical importance of each variable. The definition of weights considers the opinion of children and technicians. Consultation with children is carried out by Mapping Volunteers (VGI), Consultation on Hierarchy, Geodesign of Ideas for the area and Artistic Workshop. In the technical study, the query applies the Delphi method. It uses the VGI – Volunteered Geographic Information – web-based platform, where children record places of topophilia and topophobia, while technicians map the presence of 15 indicators. The set of information is made available on a web-based platform of SDI – Spatial Data Infrastructure, in which there are resources for a Geodesign workshop when ideas for the area are elaborated through negotiation and co-creation. The product is a transformation design for the area through urban design and parameterisation of uses.

Mobility is a vital welfare indicator which may influence broilers’ daily activities. Classical broiler mobility assessment methods are laborious and cannot provide timely insights into their conditions. Here, we proposed a semi-supervised Deep Learning (DL) model, YOLOv5, combined with Deep Sort algorithm conjoined with our newly proposed algorithm, Neo-Deep Sort, for individual broiler mobility tracking. Initially, 1,650 labeled images from five days were employed to train the YOLOv5 model. Through semi-supervised learning (SSL), this narrowly trained model was then used for pseudo-labeling 2,160 images, of which 2,153 were successfully labeled. Thereafter, the YOLOv5 model was fine-tuned on the newly labeled images. Lastly, the trained YOLOv5 and the Neo-Deep Sort algorithm were applied to detect and track 28 broilers in two pens and categorized them in terms of hourly and daily traveled distances and speeds. SSL helped in increasing the YOLOv5 model’s mean Average Precision (mAP), in detecting birds, from 81% to 98%. As compared with the manually measured covered distances of broilers, the combined model provided individual broiler's hourly moved distances with a validation accuracy of about 80%. Eventually, individual and flock level mobilities were quantified while overcoming the occlusion, false and miss detection issues.

The effect of seven different thawing methods (atmospheric temperature thawing (AT), microwave thawing (MT), microwave magnetic nanoparticles thawing (MMT), microwave vacuum thawing (MVT), far-infrared thawing (FT), far-infrared magnetic nanoparticles thawing (FMT) and far-infrared ultrasonic thawing (FUT)) on water mobility and microstructure of frozen pork was examined. The results showed that the thawing loss, cooking loss, and centrifugal loss of MVT treatment were lower than those of other thawing methods. The results of LF-NMR and NMRI showed that in MVT and FUT treatment, the proportion of bound water and non-flowing water increased, while the proportion of free water decreased. The microstructure was significantly improved by microwave or far-infrared thawing assisted by magnetic nanoparticles, and the frozen pork samples had a more compact and granular microstructure. In summary, MVT and FUT improved the quality of thawed meat and have broad potential applications in thawing meat.

The African bush and forest elephants, Loxodonta Africana and Loxodonta cyclotis, and the Asian elephant, Elephas maximus, are the largest land-dwelling animals. Elephants need to be highly mobile and active in order to find fresh food and water, and in the case of males, to locate females in estrus for breeding. Asian elephants walk up to 21 km each day and African elephants can walk up to 28 km per day. This high level of mobility in the wild is also important for maintaining an optimum musculoskeletal health. However, most zoo elephants live in restricted spaces and cold climates that require extended periods of indoor confinement are therefore unable to be as physically active. Zoo enclosures for elephants are relatively small with hard surfaces (i.e. concrete, tarmac and hard packed dirt), so they cannot exercise and are forced to stand on unnaturally hard surfaces continually. Physical inactivity in captivity makes them more prone to gaining weight and developing bone and joint diseases such as osteomyelitis, joint ankylosis and osteoarthritis (OA). Many health and welfare problems in captive elephants are likely to be caused by the lack of mobility. This perspective article focuses on the possible link between captivity, mobility, physical inactivity and the development of OA in captive elephants.

This study addressed the need for efficient data collection in micro-mobility using low-end hardware, focusing on developing a system capable of handling large real-time data streams. We proposed a novel data collection system that leverages incremental learning techniques, enabling AI-based services for micro-mobility passengers through smartphones. Our approach utilizes 3-axis acceleration sensors integrated into micro-mobility devices, collecting motion data in real-time. This data is processed through an incremental learning pre-processing server, employing the Broad Learning System algorithm, to ensure robust performance in noisy, real-world environments. The use of incremental learning is pivotal, allowing our system to adapt continuously to new data, enhancing the accuracy and relevance of the AI services provided to passengers. This research not only advances the technical capabilities in micro-mobility data handling but also has the potential to enhance the overall passenger experience through improved AI-based services.

European cities are motivated to act towards the achievement of climate-neutral mobility solutions. Often, though, they are facing many challenges when bringing (innovative) sustainable mobility solutions forward. Capacity building that fills skills gap and/or enables acquisition of new ones related to the planning and implementation of such solutions can empower local/ regional authorities to identify them, adopt them and eventually deliver them properly. The aim of this paper is to present the Key Performance Indicator (KPI) framework that has been used for the assessment of the effectiveness of the Learning and Exchange Programme applied in an EU-funded project. It presents the methodological steps for the adoption of the KPIs, as well as the tools used for the selection of the KPI data and the KPI monitoring at project level. It also presents the results from the application of the framework for assessing the knowledge performance towards the deployment of sustainable mobility solutions. It finally reflects on recommendations for applying the KPI framework to other cases and thematic contents.

Following electrification of automotive transport, studies on the penetration of Electric Vehicles (EVs) are widespread, especially in defined contexts, e.g. cities. As major transport hubs, airports fall within contexts worth of interest. In this work, a forecast of the demand for electric mobility in an Italian international airport (Rome, Fiumicino) is presented. First, a wide review of proposed sce-narios on the penetration of EVs at international and national level and available data on local automotive transport are presented, as preliminary study for the definition of reference scenarios for the local context. Then the methodology proposed is presented and applied to the specific case study. Finally, a preliminary sizing of the required charging infrastructure is reported. The proposed approach can be considered as reference for similar studies on electrical mobility in other airport areas around the world.

The COVID-19 pandemic starting in the first half of 2020 has changed the lives of everyone across the world. Reduced mobility was essential due to it being the largest impact possible against the spread of the little understood SARS-CoV-2 virus. To understand the spread, a comprehension of human mobility patterns is needed. The use of mobility data in modelling is thus essential to capture the intrinsic spread through the population. It is necessary to determine to what extent mobility data convey the same message of mobility within a region. This paper compares different mobility data sources by constructing spatial weight matrices and further compares the results through hierarchical clustering. This provides insight for the user into which data provides what type of information and in what situations a particular source is most useful.

Temporomandibular disorders (TMDs) refer to a group of conditions that affect the temporomandibular joint, causing pain and dysfunction in the jaw joint and related muscles. The diagnosis of TMDs typically involved clinical assessment through operator-based physical examination, self-reported questionnaire and imaging studies. To objectivize the measurement of TMD, this study aims at investigating on the feasibility to use machine-learning algorithms fed with data gathered from low-cost and portable instruments to discriminate the presence of TMD in adult subjects. Through this aim, the experimental protocol involved fifty participants, equally distributed between TMD and healthy subjects, acting as control group. The diagnosis of TMD has been performed by a skilled operator through the typical clinical scale. Participants underwent to a baropodometric analysis by using a pressure matrix and the evaluation of the cervical mobility through inertial sensors. Nine machine-learning algorithms belonging to support vector machine, k-nearest neighbours and decision tree were compared. The k-nearest neighbours based on cosine distance was found as the best performing, achieving performance of 0.94, 0.94 and 0.08 for the accuracy, F1-score and G-index, respectively. These findings open the possibility to use such methodology to support the diagnosis of TMDs in clinical environments.

In many countries, governments have implemented non-pharmaceutical techniques to limit COVID-19 transmission. Restricting human mobility is one of the most common interventions, including lockdown, travel restrictions, working from home, etc. However, due to the strong transmission ability of the virus variants, further rounds of interventions, including a strict lockdown, are not considered as effective as expected. The paper aims to understand how the lockdown policy and pandemics changed human mobility in the real scenario. Here we focus on understanding the mobility changes caused by compliance with restrictions and risk perceptions, using the mobility index from the Google report during three strict lockdown periods in Leeds, the largest city in the county of West Yorkshire, England from March 2020 to March 2021. The research proposed the time-varying z-scores and Principal Component Analysis (PCA) to simulate how local people dynamically process and perceive health risk based on multi-dimensional daily COVID-19 reports first. Further modelling highlights exponentially increasing policy non-compliance through the duration of lockdown, probably attributable to factors such as mental anxiety and economic pressures. Finally, the proposed nonlinear regression model examines the mobility changes caused by the population's dynamic risk perceptions and lockdown duration. The case study at Leeds fits data well and shows that the third lockdown policy took effect much slower than the first. At the same time, the negative impact of the epidemic on population mobility decayed 40% in the third lockdown period in contrast with the first lockdown. The risk perception estimation methods could reflect that the local population became increasingly accustomed to the COVID-19 situation, and local people rationally evaluated the risks of COVID in the third lockdown period. The results prove that simulated risk perceptions and policy decay could explain urban mobility behaviour during the mobility well during lockdown periods, which could be a reference for future decision-making processes.

Decarbonization of air mobility requires the decarbonization of its energy. While biofuels will play an important role, other low carbon energy carriers based on electricity are considered: battery electrification, liquid hydrogen (LH₂) or eFuel, a hydrogen-based energy carrier. Each energy carrier has its own conversion steps and losses and its own integration effects with the aircraft. These combinations lead to different energy requirements and must be understood to compare their cost and CO₂ emissions. Since they are all electricity-based, this study compares these energy carriers using the well to rotor methodology when applied to a standard Vertical Take-Off and Landing (VTOL) air mobility mission. This novel approach allows one to understand that the choice of the energy carrier dictates the propulsive system architecture, leading to integration effects with the aircraft which can significantly change the energy required, from 400 to 2665 kWh for the same mission. These deviations lead significant differences in CO₂ emissions and costs. Battery electrification is impacted by the battery manufacturing but has the lowest electricity consumption. It is an optimum solution but only until the battery weight can be lifted. In all scenarios eFuel is more efficient than LH₂. We conclude that carrying the most efficient molecule in an aircraft pays the extra energy cost spent on the ground. Finally, we found that for each of these energy carriers, it is the electricity carbon intensity and price which will dictate the cost and CO₂ emissions of an air mobility mission.

This paper explores the challenges of providing services of general interest in rural areas of Germany and proposes co-created mobility software solutions to address the specific needs of these regions. The research is part of the Smarte.Land.Regionen project, which aims to improve digital public services at the district level. Focusing on rural mobility, the paper introduces the concept of ride-sharing benches as a potential solution. Through workshops, surveys and market research, the study identifies barriers to the adoption of ride-sharing benches and investigates factors contributing to their success. The proposed software solution emphasizes user-centered development, geographic location of benches and prioritized matching of passengers. Findings highlight safety concerns, lack of reliability, and the importance of getting people who are theoretically interested in solutions to actively participate in them. The paper emphasizes the importance of collaborative development with county stakeholders. Future research should focus on sustaining and scaling digital solutions, measuring their impact on rural mobility, and ensuring their transferability to other regions. The ultimate goal is to contribute to inclusive and sustainable rural development by improving access to digital public services and promoting the adoption of tailored mobility solutions.

Student mobility is one of the most important indicators to reflect institutional internationalization in a sustainable higher education system. While student mobility issues have been addressed persistently, the phenomenon is rarely discussed in association with higher education expansion. Since higher education sustainable development has received much scholarly attention, monitoring student mobility flows to adjust international strategies is necessary. This study explored practical approaches to detect student mobility flows in the process of higher education expansion. Targeting Taiwan’s higher education system as an example, we addressed the topic of system expansion and the core issues of student mobility. Target series data were collected from 1950 to 2021, including higher education enrollment, gross enrollment ratio (GER), and number of inbound and outbound students. The data were transformed with index formats, for example enrollment increasing ratio (IR) and net flow ratio. The cross-correlation function (CCF) and autoregressive integrated moving average (ARIMA) were used to determine the correlations of the series data and their future trends. The findings suggested that the effect of system expansion, with GER and IR, might influence the mobility ratios significantly in the process of higher education expansion. This study confirmed that the time series approaches work well in detecting the phenomena of higher education expansion and their effects on student mobility flows in the future.

A key concern in an ageing society is citizens’ mobility. As populations age, disability impairments can affect active ageing, health-related wellbeing and quality of life. In this paper, we present the on-going research project SeriousGiggle—Game-based learning for triggering active ageing. Its goal is to assess the potential of game-based learning for active ageing and contribute to a sense of wellbeing and quality of life. It also seeks to improve the mobility of older adults by creating a set of journey plans with route guidance that are rated in terms of safety, community support, environment and age-friendliness. Drawn on our field work with 33 co-designers, 40 end users and 10 semi-structured interviews with Subject Matter Experts, we identify a set of necessary design requirements to an Age-friendly Playable City. This study recommends the use of gamification and playful techniques to engage the end-users to provide information about local traffic signs, pavement conditions, wayfinding and, therefore, help to create route guidance and walking assistance that are personalized to older adults’ context in terms of location, travel fitness, mobility impairments and motivations.

This study utilizes data from the fourth National Health Survey conducted in 2019. in the Republic of Serbia, aiming to contribute to a deeper understanding of the factors influencing the mobility of the elderly population. It examines the sociodemographic and psychosocial factors associated with functional limitations in older adults. By analyzing variables such as age, gender, marital status, education, income, social support, and mental health, the study seeks to explain their impact on the prevalence of walking limitations.Questionnaires were employed as a research instrument in line with the methodology of the European Health Survey (EHIS). The analysis is based on a sample of 3,705 participants aged 65 and above. Statistical significance between variables was assessed using the Chi-square test. Post-hoc comparisons were performed using pairwise z-tests. Univariate logistic regression was employed to identify predictors of walking difficulties. Additionally, multivariable logistic regression was conducted to further explore predictors while adjusting for potential confounding variables, with odds ratios and corresponding 95% confidence intervals estimated.Women exhibit significantly higher prevalence of walking difficulties compared to men (p < 0.001). There is a significant variation in the prevalence of walking difficulties among different age groups. Individuals aged 75-84 show the highest prevalence in all categories of walking difficulties, with particular significance in the categories of "no difficulty," "some difficulty," and "unable to walk at all" (p < 0.001). Higher levels of education generally correlate with lower prevalence of walking difficulties. Married or partnered individuals have 0.522 times lower odds of reporting difficulties in walking compared to singles (p < 0.05). Individuals with lower wealth index (1-Least affluent) have significantly higher prevalence of walking difficulties.This knowledge can inform targeted interventions to enhance mobility and improve the overall well-being of older individuals.

Prediction models in mobility and transportation maintenance systems have been dramatically improved through using machine learning methods. This paper proposes novel machine learning models for an intelligent road inspection. The traditional road inspection systems based on the pavement condition index (PCI) are often associated with the critical safety, energy and cost issues. Alternatively, the proposed models utilize surface deflection data from falling weight deflectometer (FWD) tests to predict the PCI. Machine learning methods are the single multi-layer perceptron (MLP) and radial basis function (RBF) neural networks as well their hybrids, i.e., Levenberg-Marquardt (MLP-LM), scaled conjugate gradient (MLP-SCG), imperialist competitive (RBF-ICA), and genetic algorithms (RBF-GA). Furthermore, the committee machine intelligent systems (CMIS) method was adopted to combine the results and improve the accuracy of the modeling. The results of the analysis have been verified through using four criteria of average percent relative error (APRE), average absolute percent relative error (AAPRE), root mean square error (RMSE), and standard error (SD). The CMIS model outperforms other models with the promising results of APRE=2.3303, AAPRE=11.6768, RMSE=12.0056, and SD=0.0210.

Changing mobility patterns combined with changes in the climate present challenges and opportunities for global health, requiring effective, relevant and humane policy responses. This study used data from a systematic literature review that examined the intersection between climate change, migration and health. The aim of the present study was to synthesize policy recommendations in the peer-reviewed literature, regarding this type of environmental migration with respect to health, to strengthen the evidence-base. Systematic searches were conducted in four academic databases (PubMed, Ovid Medline, Global Health and Scopus) and Google Scholar for empirical studies published between 1990 – 2020 that used any study design to investigate migration and health in the context of climate change. Studies underwent a two-stage protocol-based screening process and eligible studies were appraised for quality using a standardized mixed-methods tool. From the initial 2,425 hits, 68 articles were appraised for quality and included in the synthesis. Among the policy recommendations, six themes were discernible: (1) avoid the universal promotion of migration as an adaptive response to climate risk; (2) preserve cultural and social ties of mobile populations; (3) enable the participation of migrants in decision-making in sites of relocation and resettlement; (4) strengthen health systems and reduce barriers for migrant access to health care; (5) support and promote optimization of social determinants of migrant health; (6) integrate health into loss and damage assessments related to climate change. The results call for transformative policies that support the health and wellbeing of people engaging in, or affected by mobility responses, including those whose migration decisions and experiences are influenced by climate change, and to establish and develop inclusive migrant healthcare.

During the last decades the quantitative description of electrical and magnetotransport properties of solid-state materials has been a remarkable challenge in materials science. Recently, the discovery of a novel class of materials, the topological semimetals, has led to a growing interest for the full understanding of their magnetotransport properties. In this review, the strong interplay among topology, band structure and carrier mobility in recently discovered high carriers mobility topological semimetals is discussed and their effect on their magnetotransport properties is outlined. The huge magnetoresistance effect, especially in the Hall transverse configuration, and a new version of a three-dimensional quantum Hall effect observed in high-mobility Weyl and Dirac semimetals are reviewed. The design of novel quantum sensors based on solid-state semimetals is also encouraged.

Over a billion people around the world are disabled, among them, 253 million are visually impaired or blind, and this number is greatly increasing due to ageing, chronic diseases, poor environment, and health. Despite many proposals, the current devices and systems lack maturity and do not completely fulfill user requirements and satisfaction. Increased research activity in this field is required to encourage the development, commercialization, and widespread acceptance of low-cost and affordable assistive technologies for visual impairment and other disabilities. This paper proposes a novel approach using a LiDAR with a servo motor and an ultrasonic sensor to collect data and predict objects using deep learning for environment perception and navigation. We adopted this approach in a pair of smart glasses, called LidSonic V2.0, to enable the identification of obstacles for the visually impaired. The LidSonic system consists of an Arduino Uno edge computing device integrated into the smart glasses and a smartphone app that transmits data via Bluetooth. Arduino gathers data, operates the sensors on smart glasses, detects obstacles using simple data processing, and provides buzzer feedback to visually impaired users. The smartphone application collects data from Arduino, detects and classifies items in the spatial environment, and gives spoken feedback to the user on the detected objects. In comparison to image processing-based glasses, LidSonic uses far less processing time and energy to classify obstacles using simple LiDAR data, according to several integer measurements. We comprehensively describe the proposed system's hardware and software design, construct their prototype implementations, and test them in real-world environments. Using the open platforms, WEKA and TensorFlow, the entire LidSonic system is built with affordable off-the-shelf sensors and a microcontroller board costing less than $80. Essentially, we provide designs of an inexpensive, miniature, green device that can be built into, or mounted on, any pair of glasses or even a wheelchair to help the visually impaired. Our approach affords faster inference and decision-making using relatively low energy with smaller data sizes as well as faster communications for the edge, fog, and cloud computing.

Abstract The aim of our study is to analyse the perception of the families and concerned social workers. The research was conducted in an underprivileged and disadvantaged microregion in North Hungary. The main focus was the perception on the available health, educational, child welfare and social services and supports. The starting point was to enquire the target group’s knowledge of these services. The study examines the extent to which social work is able to provide support to disadvantaged, marginalized families with children, and the way how the dysfunctional operation of the system contributes to the perpetuation of the clients’ life conditions. Analysing the quality of these services and supports is crucial to understand the social mobility chance of the children living in this microregion. The results show that without capability and talent development for the children and given the lack of welfare services, the mobility chance and opportunities of these families are extremely low in Hungary.

The aim of the following paper was to determine the influence of soft tissue therapy on respiratory efficiency and chest mobility of women suffering from breast cancer. This study was a controlled randomized trial. Tests were carried out in a group of patients (n=49), who were hospitalized in the Province Polyclinic Hospital, Konin, Poland. In the study group, irrespective of the standard physical therapy program, an additional therapy program was run. The program consisted in applying specific techniques of soft tissue treatment. All patients in the each term were subject to pulmonary function test, chest mobility and pain assessment. Statistical analysis of the obtained results of spirometry and chest mobility assessment have revealed no differences in the analyzed parameters between the examined groups in the period of joint therapeutic treatment. In the period between the 3rd examination and the end of the 11-month- rehabilitation treatment, statistically significant differences were observed in the analyzed spirometry parameters, however, there was no difference in the parameters describing airflow in small airways (MEF₅₀,PEF) between individual groups, during consecutive examinations in the course of diversified therapeutic treatment. Chest mobility assessment of the patients, performed during diversified therapeutic treatment, revealed statistically significant differences between the groups. However, there was no difference between the examined groups, as far as pain sensation is concerned. Enhancing the regular rehabilitation program by including additional therapeutic methods, which are based on myofascial release and post-isometric relaxation techniques, had a beneficial effects regarding respiratory system efficiency.

. Various elements such as evolutions in IoT services resulting from sensoring by vehicle parts and advances in small communication technology devices have significantly impacted the mass spread of mobility services that are provided to users in need of limited resources. In particular, business models are progressing away from one-off cost towards longer term cost as represented by shared services utilizing kick-boards or bicycles and subscription services for vehicle software. Advances in shared mobility services as described are calling for solutions that can enhance reliability of data aggregate by users leveraging mobility services in the next-generation mobility areas. However, mining process to renew status, ensures continued network communication and block creation demands high performance in public block chain. This thesis proposes random certificate node selection mechanism in block network that creates blocks via node that has tokens issued for block creation and lets only specific nodes selected by encrypting token information acquires token.

This chapter is written for the welfare of the society, questioning and enlightening the effects of the increment or decrement in the percentage of quality of air causing pollution due to the rise in the traffic post-lockdown due to COVID-19 in metro cities, specifically in Delhi. In this chapter, we address the question about people's preference in moving in the shared taxis to their workplaces or their reluctance and denial of the idea of moving in the shared vehicle because of the fear of getting infected. The sensitivity of the situation will compel the people to move in a single occupied vehicle (SOV). The rise in the number of vehicles on the roads will result in traffic jams and different kinds of pollution where people battling with the pandemic will inevitably get exposed to other health-related issues. We use a BPR (Bureau of Public Roads) model to combat this issue endangering the environment and public health. We exploit the BPR function to relate average travel time to the estimated number of commuters travelling by car. We collect mode share data from the NITI Ayog, the State Resource Centre and other authentic sources, which gives unique figures of the impact of shared mobility in India and how, in its absence, various sectors will get affected. Using the given data and the BPR, we evaluate increased vehicle volumes on the road if different portions of transit and carpool users switch to single-occupancy vehicles and its effect on multiple other factors. Based on the study of densely populated city, Delhi, we predict that cities with significant transit ridership are at risk for extreme traffic and pollution unless transit systems can resume safe with effective protocols.

The COVID-19 pandemic caused by SARS-CoV-2 poses a devastating threat to human society in terms of health, economy and lifestyle. Establishing accurate and real-time models to predict and assess the impact of the epidemic on the economy is instructive. We have designed a new model to quantitatively assess the impact of the COVID-19 on the economy of China’s mainland. The nominal GDP in the Q1 of 2020 that we predicted for China’s mainland with the Baidu Mi-gration Data is RMB 20,785.7 billion, which is less by 3.59% than that in 2019. The estimated val-ue is confirmed roughly by the official report released in April 17, 2020 (RMB 20,650 billion, 6.8% year-on-year declined). Strict control measures during the epidemic have greatly reduced Chi-na's economic activity and had a serious impact on the country's economy. Orderly promotion of population mobility plays a decisive role in economic recovery.

Urban mobility is experiencing a profound change. On the one hand, mobility patterns are becoming more complex, and typical home-work-home travel is no longer the rule, as journeys now tend to connect multiple points in a rather inconstant pattern. This has changed the approach to transport planning, in that the existing transportation planning and operation approaches have been focussed on the ability to identify typical home-work/school-home travel and subsequently plan the transport system accordingly. The traditional approach has been: forecast -> plan -> deliver, as new mobility solutions are emerging. These are characterised by greater flexibility, in that they take advantage of the “sharing concept” and simultaneously provide solutions that have lower GHG emissions. Urban mobility follows a fuzzier pattern, with even the urban transportation system behaving like an active organism, where solutions are often quickly replaced. This dynamic and evolving environment raises several new challenges at different levels. The best digital solution system is the Mobility-as-a-Service (MaaS) one. This system transforms the physical transportation system into a commodity and takes advantage of the internet of things (IoT). However, the onset of MaaS solutions is anything but linear. Several business models have emerged, with different partners originating from different industries (e.g., technological, transport operators, infrastructure managers, etc.) developing their own solutions, often in competition with others. It is not unusual to find different MaaS solutions in the same city, which integrate different solutions.

The vision can be used to recognize images and to improve mental pictures of environments. Visually impaired people feel a lack of aid for their independent or facilitated urban mobility, which can be achieved with the use of mobile devices and cartographic tools using audiovisual outputs. This work raises issues about urban mobility for the accessibility of visually impaired people in areas still unexplored by them, it uses cartographic technologies in electronic devices. For a preview of the test area located in Monte Carmelo (MG), a tactile model was used to form the first image of the eight volunteers. Results were obtained through research with not blind and blind individuals, it validated the use of áreas’s mobile registration prototype positioning in field or not, when the coordinates from the objects are known for registration. The results indicate that both the tactile model and the audiovisual prototype can be used by blind and non-blind people. Above all, the prototype proved to be a viable and adequate option for decision making in urban environments. New ways of presenting data to blind or otherwise blind people can still be studied.

Existence of hybrid electric vehicles nowadays is one of the emerging technologies worldwide. Different countries are using this technology on their transportation, and nowadays, a lot of other countries are gradually adapting on using this kind of innovation in their transport system. Philippines is among these countries which aims to have a sustainable mobility by embracing the use of hybrid - electric vehicles but still lots of consumers are lacking awareness on this technology. Lack of information on the social, environmental, and economic potential benefits are among the main issues of Philippines consumers that really affect its uptake. The goal of this study was to evaluate the consumer’s perception and purchase intention on the transition of hybrid - electric vehicles for sustainable mobility and transportation here in the Philippines. It aimed to assess consumer awareness with hybrid - electric vehicles and its potential benefits to human beings in terms of social, environmental, and economic aspects. The study also gauged the impact of this perception on consumer’s purchase intention on hybrid - electric vehicles. These objectives were attained using the Descriptive Statistics and Correlation Analysis. Using these methods, the results revealed that majority of the consumers believed on the positive benefits of transitioning to hybrid - electric vehicles in terms of social, environmental, and economic aspects. This study also showed that these benefits have high impact on the consumer’s intention of buying or having a hybrid – electric vehicle. Electric vehicle is one of the most effective measure of decarbonizing the transport system. Furthermore, government and automotive businesses must strengthen their drive in spreading awareness of hybrid – electric vehicle’s benefits to consumers to further support country’s effort for development.

Cultural practices and development level can influence a population’s household structures and mixing patterns. Within some populations households can be organized across multiple dwellings. This likely affects the spread of infectious disease spreads through these communities, however, current demographic data collection tools do not record these data. Methods: Between June–October 2018, the Contact And Mobility Patterns in remote Aboriginal Australian communities (CAMP-remote) pilot study recruited Aboriginal mothers with infants in a remote northern Australian community to complete a monthly iPad-based contact survey. Results: Thirteen mother-infant pairs (participants) completed 69 study visits between recruitment and the end of May 2019. Participants reported they and their other children slept in 28 dwellings during the study. The median dwelling occupancy, defined as people sleeping in the same dwelling on the previous night, was nine (range: 3.5–25). Participants who completed at least three responses (n=8) slept in a median of three dwellings (range: 2–9). Each month a median of 28% (range: 0%–63%) of the participants travelled out of the community. Including these data in disease transmission models amplified estimates of infectious disease spread in the study community, compared to models parameterized using census data. Conclusions: The lack of data on mixing patterns in populations where households can be organized across dwellings may negatively impact the accuracy of infectious disease models for these communities and the efficacy of public health actions they inform.

Studies on human mobility have a long history with increasingly strong connections to multi-disciplines across social science, environmental science, information and technology, computer science, engineering, and health science. However, what is lacking in the current research is a summary of studies on human mobility to identify the evolutional pathway and future research directions. To address this gap, we conduct a systematic review of human mobility-related studies published from 1990 to 2020. Drawing on the selected publications retrieved from the Web of Science, we conduct a bibliometric analysis and network visualisation by CiteSpace and VOSviewer on publication years and numbers, authors and their countries and afflictions, citations, topics, abstracts, keyword, and journals. Our findings show that human mobility-related studies have become increasingly interdisciplinary and multi-dimensional, enhanced by the involvement of multi-source big data, the development of technologies, the innovation of modelling approaches, and the novel applications in various areas. We also summarise four future research directions proposed by top cited authors and mobility studies, in terms of data sources, modelling methods, applications, and technologies. We advocate in-depth research on human mobility to address real-world problems and contribute to social good as promising future orientations through integrating multi-source big data and advanced modelling methods facilitated by artificial intelligence, and machine and deep learning.

Smart, reliable, and connected multi-modal mobility has been a long-standing goal of transit services. This paper focuses on the smart, seamless, and multi-modal mobility service in the context of “Mobility as a Service” (MaaS). Intelligent mobility is the smarter, greener, and more efficient movement of passengers around the world. Increasingly, mobility is approached as a service. This study first conducts an extensive literature review on mobility behavior and demand pattern of MaaS end-users. It then extends the mechanism of supply chain, MaaS, synergy (i.e., vertical cooperation synergy, horizontal competition synergy), and coopetition to develop the multi-tier closed-loop intelligent mobility service supply chain network. This paper explains the intelligent mobility service supply chain network from following perspectives: (i) mobility service taxonomy of MaaS; (ii) aims of intelligent mobility service supply chain network; (iii) urban rail transit (URT)-centered alternatives for integrated multimodal journey planning, i.e. access + URT + egress, and both access and egress can be served by Mobility-On-Demand (MOD) transport; (iv) node member imperatives. From a synthesis of insights from the ‘during’ journey, this study puts forward the synergetic design of intelligent mobility service supply chain network, including: (i) multi-tier closed-loop structure; (ii) key nodes identification for the physical multimodal transport network in the supply chain; (iii) hybrid synergy mechanisms among the partners, i.e., synergy principle, temporal splitting approach for coopetition synergy; (iv) index systems and evaluation methods for synergy measurement. This study also contributes to the integrated multimodal journey planning. In concluding, the paper highlights the important implications of the proposed intelligent mobility service supply chain network for MaaS bundle design and adverse effects reduction, resulting from 1 + 1 > 2 synergy effects.

Background and objectives: Patients with multiple sclerosis (MS) have many potential factors (spasticity, immobilization, glucocorticoids use) which can deteriorate the anthropometrical status and body composition and may have the potential impact on the functional mobility and basic motor skills improvement after physiotherapy. The aim of the study was to assess the functional mobility and basic motor skills in patients with MS and to correlate them with disability and anthropometrical status and body composition parameters. Materials and Methods: Timed Up-and-Go test (TUG), and six-minute walk test (6MWT) were performed in 36 patients with MS before and after 4 weeks of physiotherapy. Body mass index (BMI), waist to height ratio (W/HtR), and waist-to-hip ratio (WHR) were assessed in this group. Body composition was evaluated by bioelectrical impedance analysis (BIA) and fat mass (FAT), fat free mass (FFM), total body water (TBW) and predicted muscle mass (PMM) were expressed as percentage of body mass. Clinical status was assessed by EDSS and AI scales. Results: After physiotherapy, there was a significant improvement in functional mobility and basic motor skills assessed by total distance in 6MWT (p<0.001) and in TUG trials (p<0.001). Positive significant correlations were found between the results obtained in both tests (either before and after physiotherapy) vs. FFM, TBW and PMM, whilst worse results in functional mobility and basic motor skills correlated significantly with higher WHtR, WHR and FAT (p<0.05). Clinical status (EDSS) were significantly related to the WHtR and body composition parameters with the same manner as the results in the either 6MWT and TUG. However, there were no significant relationships between BMI vs. either clinical status (EDSS, AI) and functional mobility tests results in patients with MS. Conclusions: Functional mobility and basic motor skills may be significantly improved during the physiotherapy, but they are related to the anthropometrical status and body composition of MS patients. Moreover, disability status is also significantly related to this parameters. Body composition deterioration seems to be the important target for the therapeutic intervention in MS patients. For proper nutritional status assessment in patients with MS, body composition analysis or WHtR instead BMI should to be used.

Introduction: Transportation logistics play a pivotal role in facilitating both individual mobility and supply chain operations on a global scale. However, conventional transportation systems have contributed significantly to urban congestion and environmental degradation. In response to these challenges, there is a growing momentum towards the adoption of intelligent transportation systems (ITS) and sustainable transportation solutions. This research aims to explore the potential of renewable energy sources to power electric vehicles (EVs) and flying automobiles, thereby accelerating the transition towards a low-carbon future. Objectives: The primary objectives of this research are as follows: - Investigate the role of renewable fuels in powering both EVs and flying cars to reduce reliance on fossil fuels and mitigate carbon emissions. - Analyze the dynamic growth and sustainability implications of advancements in battery technology and alternative renewable energy sources, such as Hydrogen Fuel Cells. - Evaluate the challenges and opportunities associated with the integration of flying vehicles into existing transportation infrastructure, focusing on safety, airspace control, and infrastructure development. - Review insights and guidance to stakeholders on promoting sustainable transportation solutions for EVs and flying cars through the utilization of renewable energy sources and the reduction of carbon emissions from the literature. Methodology: This research employs a mixed-method approach, combining literature review, and causal loop diagram analysis. The literature review provides a comprehensive understanding of current trends, challenges, and opportunities in sustainable transportation and renewable energy technologies. A causal loop diagram is utilized to visualize the dynamic interactions between various factors influencing the adoption of EVs and flying cars, including technological advancements, policy interventions, and market dynamics. Results and Discussion: The findings of this research highlight the significant potential of renewable energy sources, such as solar, wind, and hydrogen, in powering both EVs and flying cars. Advances in battery technology and hydrogen fuel cells are identified as key drivers in accelerating the transition towards sustainable transportation systems. However, challenges remain in terms of infrastructure development, safety regulations, and airspace management for flying vehicles. Nevertheless, there is a noticeable advancement in reducing carbon emissions and reliance on fossil fuels with the widespread adoption of EVs. By harnessing renewable energy and implementing effective policy measures, stakeholders might able to promote the widespread adoption of sustainable transportation solutions, thereby contributing to environmental protection and societal well-being. Conclusion: Literally, this research underscores the importance of sustainable transportation solutions in addressing urban congestion, environmental pollution, and energy security concerns. By leveraging renewable energy sources and embracing technological advancements, such as EVs and flying cars, stakeholders pave the way for a more sustainable and resilient transportation system. However, concerted efforts are needed to overcome existing challenges and ensure the successful integration of these technologies into existing infrastructure. Through collaborative partnerships and innovative initiatives, a low-carbon future for transportation logistics can be achieved, benefiting both the environment and society as a whole.

Oxygen and hydrogen mobility are among the important characteristics for operation of solid oxide fuel cells, permselective membranes and many other electrochemical devices. This, along with other characteristics, enables reaching a high power density of solid oxide fuel cells and a high oxygen or hydrogen permeation fluxes for membranes. This work focuses on oxygen and hydrogen diffusion of mixed ionic (oxide ionic or/and protonic) – electronic conducting materials for these devices and its role in the performance. Ionic transport properties of conventional and state-of-the-art materials are reviewed.

This paper investigates the transmission of educational attainment from parents to offsprings as a mediator of intergenerational class mobility in Europe. The study covers the last two decades with data drawn from a cross-national large scale sample survey, namely the European Social Survey (ESS), for the years 2002 - 2018. Interest has focused on the question of persistence of inequality of educational opportunities by examining attainment of nominal levels of education and the association between the educational attainment of the parent with the highest level of education and their descendants. The study covers also new trends in social mobility which consider education as a ‘positional good’ and a novel method of incorporating educational expansion into the transition probabilities is proposed, providing answers to whether the rising accessibility of educational qualifications attenuates the association between social origin and educational attainment. Therefore, the concept of positionality is taken into account in the estimation of intergenerational transition probabilities and to complement the analysis mobility measures are provided for both methods, nominal and positional. The proposed positional method is validated through a correlation analysis between the upward mobility scores (nominal and positional) with the Education Expansion Index (EEI) for the respective years. The upward mobility scores estimated via the positional method are higher correlated with the EEI for all years indicating a better alignment with the broader trends in educational participation and achievement.

Efficient traffic systems control in large cities with complex traffic management of signalized intersections is a challenging task, particularly when dealing with high traffic volumes. The city of Zagreb faces this challenge, as all administrative and governmental institutions are located in the old city centre, and routes for escorted vehicles have a significant impact on the traffic network. This paper addresses the issue of the impact of unconditional priority for escorted vehicles on the energy efficiency of the urban traffic network in the city of Zagreb. The traffic network model is developed by using the PTV Vissim microsimulation software. The evaluation was conducted with node (delay, queue length, number of stops) and network evaluation parameters (CO2 emission, NOx emission, PM10 emission, and fuel consumption). The results show that unconditional priority has minimal impact on energy consumption and exhaust emission in the observed scenario. This is a significant result considering all actions that have to be done to manage the passage of the escorted vehicles through the traffic network.

Recently, smart mobility intelligent traffic services have become a critical task in Intelligent Transportation Systems (ITS). This involves not only the use of advanced sensors and controllers but also the ability to respond to real-time traffic situations at intersections, alleviate congestion, and generate policies to prevent traffic jams. DRL (Deep Reinforcement Learning) provides a natural framework for processing tasks. In DRL, each intersection can control itself and coordinate with neighbors to achieve optimal network-wide policies. However, comparing approaches remains a challenging task due to the existence of numerous possible configurations. This research performs a critical comparison of various traffic controllers found in the literature. It demonstrates that using a nonlinear approximator for coordination mechanisms and enhancing observability at each intersection are key performance drivers.

E-commerce has gained increased popularity over the last decade. To date, there is an open debate as to whether e-commerce or brick-and-mortar shopping is environmentally less sustainable, especially due to the growing mobility resources needed for e-commerce distribution. The analysis at hand compares the CO2-equivalent emissions of e-commerce and brick-and-mortar shopping of pharmaceutical products considering spatial aspects and the typical transport modal mix of consumers when doing online and offline shopping. The object of analysis is a retailer of pharmaceutical products, more precisely medicines, which offers, both, brick-and-mortar shop and online shopping possibilities. The results show that spatial aspects concerning the residential location of consumers, the vehicles used for shopping trips, the shopping basked size, and trip-chaining effects have a crucial impact on the mobility demand and CO2-equivalent emissions of the two commerce forms. In general, for rural and sub-urban areas, e-commerce results in lower CO2-equivalent emissions, while in urban areas, brick-and-mortar shopping is the favourable solution, if the consumers walk or cycle to the next pharmacy.

A major obstacle faced by nanopore-based polymer sequencing and analysis is the high speed of translocation of an analyte (nucleotide, DNA, amino acid (AA), peptide) through the pore; the rate currently exceeds available detector bandwidth. Except for one method that uses an enzyme ratchet to sequence DNA, attempts to resolve the problem satisfactorily have been largely unsuccessful. Here a counterintuitive method based on reversing the pore voltage, and, with some analytes, increasing their mobility, is described. A simplified Fokker-Planck model shows a significant increase in translocation times for single nucleotides and AAs (up from ~10 ns to ~1 ms). More realistic simulations show that with a bi-level positive-negative pore voltage profile all four nucleotides in DNA (dAMP, dTMP, dCMP, and dGMP) and the 20 proteinogenic amino acids can be trapped inside the pore long enough for detection with bandwidths of ~1-10 Khz.

Policy induced decline of human mobility has been recognised to be effective in controlling the COVID-19 spread especially in the initial stage of the outbreak, although the relationship among mobility, policy implementation, and virus spread remains contentious. Coupling data of confirmed COVID-19 cases with Google mobility data in Australia, we present a state-level empirical study to: 1) inspect the temporal variation of COVID-19 spread and the change of mobility adherent to social restriction policies; 2) examine the extent that different types of mobility are associated with the COVID-19 spread in eight Australian states/territories; and 3) analyse the time-lag effect of mobility restriction on the COVID-19 spread. We find that social restriction policies implemented in the early stage of the pandemic controlled the COVID-19 spread effectively; the restriction of human mobility has a time-lag effect on growth rates, and the strength of the mobility-spread correlation increases up to seven days after policy implementation but decreases afterwards. The association between mobility and COVID-19 spread varies across space and time, and subjects to the types of mobility. Thus, it is important for governments to consider the degree to which lockdown conditions can be eased by accounting for this dynamic mobility-spread relationship.

Automated vehicles (AVs), which are expected to enter the market within the near future, represent the current frontiers in mobility and urban planning. AVs are assumed to bring substantial benefits to cities in many aspects. The present study attempts to investigate this broad assumption by conducting a literature review on the possible implications of AVs in cities as well as synthesizing the current state of practice of AV pilots to detect trends in their deployment. In this paper, literature findings on AVs’ implication on vehicle ownership, mobility, land use as well thirteen uses cases were synthesized to capture the big picture of them in cities. The findings showed that, in the AV pilots, the operation of AVs is limited to routes stretching less than 3.5km and an operation speed of less than 18km/h; low speed has been one of the main concerns of the participating passengers to use them for daily trips. The results also revealed that although shared AVs are expected in urban mobility, private ownership will stay competitive since vehicle ownership has been a socio-cultural identity in the history of automobiles. The findings also underlined that the potential influence of AVs on active mobility is still unclear as the AVs have not been introduced on a larger scale. Regarding AVs’ impact on land use, their introduction results in the effective use of space, but they will cause suburbanization in the long term.

The installation of electric vehicle supply equipment (EVSE) increases demand and peak loads, potentially straining existing energy distribution infrastructure. Dispersed and inadequately planned placement of charging points (CPs) can disrupt the electrical grid, surpass contracted demand thresholds, and require infrastructure upgrades, thereby incurring unfeasible costs for Distribution System Operators (DSOs). In this context, it is necessary to recognize the role of business models in enabling effective electrification of the transportation sector. In response to these challenges, this paper introduces a novel e-mobility hub management strategy, tailored for implementation in the Brazilian context. The proposed strategy revolves around a microgrid configuration encompassing dispatchable and photovoltaic generation, a battery energy storage system (BESS), EVSE infrastructure, and local loads. Moreover, this centralized controller facilitates the implementation of dynamic pricing and demand-response mechanisms, integral to business models seeking to integrate EVSE into the distribution grid. To validate the efficacy of the proposed solution, hardware-in-the-loop (HIL) simulations of the microgrid system are conducted. These simulations, incorporating the centralized controller, serve as a tool for assessing system performance and viability before on-site equipment deployment. Finally, this paper concludes with the insights gleaned from test analysis and its discussion through a selection of the most expressive scenarios, including islanded and connected operation modes.

A novel concept of ion separation Anisotropic Diffusion Mobility Analyser (ADMA) with Individual Ion Counter (IIC) was shown by numerical modelling to be able to separate ions with high resolution and ultra-high sensitivity. An ADMA-IIC device has been developed and tested at sheath flow rates below 40 l/min with a number of chemicals relevant to airport security and military applications. The resolving power of the ADMA was observed to be in the range of 40 to 80. These data were close to the resolution obtained in numerical modelling predictions. It is greater than or comparable with the RP of currently available on-the-market devices for airport security and other applications. It was also confirmed that the ADMA technology enables very fast detection of analytes, at least 100 times faster than ion mobility spectrometers. It was shown that Brownian diffusion can be controlled and even overpowered by generating highly anisotropic diffusion in the ADMA device. The ultimate sensitivity of single-ion detection below the ppq range has been demonstrated.

The H2-ICE project aims at developing, through numerical simulation, a new generation of hybrid powertrains featuring a hydrogen fueled Internal Combustion Engine (ICE) suitable for 12-meter urban buses, in order to provide a reliable and cost-effective solution for the abatement of both CO2 and criteria pollutant emissions. The full exploitation of the potential of such a traction system requires a substantial enhancement of the state of the art since several issues have to be addressed. In particular, the choice of the more suitable fuel injection system, as well as the control of the combustion process, are extremely challenging. Firstly, a high-fidelity 3D-CFD model will be exploited to analyze the in-cylinder H2 fuel injection through supersonic flows. Then, after the optimization of the injection and combustion process, a 1D model of the whole engine system will be built and calibrated allowing the identification of a “sweet spot”, in the ultra-lean combustion region, characterized by extremely low NOx emissions and, at the same time, high combustion efficiencies. Moreover, to further enhance the engine efficiency well above 40 %, different Waste Heat Recovery (WHR) systems will be carefully scrutinized, including both Organic Rankine Cycle (ORC)-based recovery units as well as electric turbo-compounding. A Selective Catalytic Reduction (SCR) aftertreatment system will be developed to further reduce NOx emissions to near-zero levels. Finally, a dedicated torque-based control strategy for the ICE coupled with the Energy Management Systems (EMS) of the hybrid powertrain, both optimized by exploiting Vehicle-To-Everything (V2X) connection, allow targeting an H2 consumption of 0.1 kg/km. Technologies developed in the H2-ICE project will enhance the know-how necessary to design and build engines and after-treatment systems for the efficient exploitation of H2 as a fuel, as well as for their integration into hybrid powertrains.

High mobility group box 1 (HMGB1) is secreted from activated immune cells, necrotic cells, and certain cancers. Previous studies have reported that different patterns of post-translational modification, particularly acetylation and oxidation, mediate HMGB1 release and confer distinct extracellular HMGB1 signaling activity. Here we report that cisplatin but not carboplatin induces secretion of HMGB1 from human A549 non-small cell lung cancer (NSCLC) cells. Cisplatin-mediated HMGB1 secretion was dose-dependent and was regulated by nuclear exportin 1 (XPO1) also known as chromosomal maintenance 1 (CRM1) rather than adenosine diphosphate (ADP)-ribosylation, acetylation, or oxidation. HMGB1, as well as lysine acetylation and cysteine disulfide oxidation of secreted HMGB1, were monitored by sensitive and specific assays using immunoprecipitation, stable isotope dilution, differential alkylation, and nano liquid chromatography parallel reaction monitoring/high-resolution mass spectrometry (nano-LC-PRM/HRMS). A major fraction of the HMGB1 secreted by low dose cisplatin treatment of A549 NSCLC cells was found to be in the fully reduced form. In contrast, mainly oxidized forms of HMGB1 were secreted by dimethyl sulfoxide (DMSO)-mediated apoptosis. These findings suggest that inhibition of XPO1 could potentiate the anti-tumor activity of cisplatin by increasing the nuclear accumulation of HMGB1 protein, an inhibitor of cisplatin DNA-adduct repair. Furthermore, low-dose cisplatin therapy could modulate the immune response in NSCLC through the established chemokine activity of extracellular reduced HMGB1. This could potentially enhance the efficacy of subsequent immunotherapy treatment.

This paper investigates urban microclimate in relation to the typical major streets and mobility layout in Turin, i.e. boulevards with lateral minor roads, called “controviali”, an almost unique urban mobility layout. The aim is to examine the possibility of intervention in relation to the type and scope of mobility for microclimate mitigation and climate adaptation purposes. To this, this paper evaluates to which extent urban morphology and mobility features contribute to determining microclimatic conditions, to finally identify site-specific prioritised strategies to cope with its mitigation. This research is structured in two phases. The first phase is dedicated to urban-scale analysis of the streets with “controviali”, resulting in the creation of a database containing their properties and typology, to finally derive six clusters of boulevards. The second phase involves the selection of one representative case study per cluster and simulation of their microclimate conditions, performed by the software ENVI-met. The results are discussed in relation to the parameters proven in the prior literature review to have a major impact on the microclimate. The assessment of the results indicated which elements affect the climatic conditions the most, allowing for the proposal of different prioritised mitigation strategies in the conclusion.

The highly specialized structure and function of neurons depend on a sophisticated organization of the cytoskeleton, which supports a similarly sophisticated system to traffic organelles and cargo vesicles. Mitochondria sustain crucial functions by providing energy and buffering calcium where is needed. Accordingly, the distribution of mitochondria is not even in neurons and is regulated by a dynamic balance between active transport and stable docking events. This system is finely tuned to respond to changes in environmental conditions and neuronal activity. In this review, we summarize the mechanisms by which mitochondria are selectively transported in different compartments taking into account the structure of the cytoskeleton, the molecular motors and the metabolism of neurons. Remarkably, the motor proteins driving the mitochondrial transport in axons have been shown to mediate also their transfer between cells. This so-named intercellular transport of mitochondria is opening new exciting perspectives in the treatment of multiple diseases.

Mobility models are used to evaluated the network protocols of the ad hoc network using the simulation. The random waypoint model is a model for mobility which is usually used for performance evaluation of ad-hoc mobile network. Mobile nodes have the dynamic mobility in the ad hoc network so the mobility model plays an important role to evaluate the protocol performance.In this article, we developed modify random waypoint mobility (MRWM) model based on random waypoint for the mobile ad hoc network. In this article, the comparative analysis of modifying random waypoint mobility and random waypoint model on the ad hoc On-Demand Distance Vector (AODV) routing protocol has been done for large wireless ad hoc network (100 nodes) with the random mobile environment for the 1800s simulation time. To enhance the confidence on the protocol widespread simulations were accomplished under heavy traffic (i.e. 80 nodes) condition. The proposed model protocol has been investigated with the performance metrics: throughput; packet delivery ratio; packet dropping ratio; the end to end delay and normalized routing overhead. The obtained results revealed that proposed modify random waypoint mobility model reduces the mobility as compared to the random waypoint mobility model and it is trace is more realist.

In this study, GC–IMS was used to analyze the volatile component and flavor profiles of Crassostrea gigas individuals of different ploidy and gender. Principal component analysis was used to explore overall differences in flavor profiles and a total of 54 volatile compounds were identified. The total volatile flavor contents in edible parts of tetraploid oysters were significantly higher than in diploid and triploid oysters. The concentrations of ethyl (E)-2-butenoate and 1-penten-3-ol were significantly higher of triploid oysters than in diploid and tetraploid oysters. In addition, the volatile compounds propanoic acid, ethyl propanoate, 1-butanol, butanal, and 2-ethyl furan were significantly higher in females than in males. The volatile compounds p-methyl anisole, 3-octanone, 3-octanone, and (E)-2-heptenal were present in higher levels in male than in female oysters. Overall, different ploidy and gender of oysters were being presented with different sensory characteristics, providing new insights for understanding the flavor characteristics of oysters.

Evidence indicates that the long noncoding RNAs are involved in the metformin-mediated anti-cancer processes. However, the potential effects of the long noncoding RNAs in metformin-mediated anti-tumor processes in esophageal squamous cell carcinomas (ESCC) are still elusive. This study uncovered that metformin decreases the level of long noncoding RNAs CCAT1 and SPRY4-IT1 thereby contributing to the down-regulation of c-Myc and vimentin. Also, the RNA level test of human ESCC tissue confirmed the positive correlation between CCAT1 and c-Myc. These findings demonstrated that metformin facilitated anti-cancer effects by targeting the 2 long noncoding RNAs (CCAT1 and SPRY4-IT1) and their consequential targets c-Myc and vimentin. Therefore, the CCAT1 and SPRY4-IT1 might act as novel molecular targets that mediate the anti-tumor effects in esophageal squamous cell carcinoma. This helps in predicting the treatment response of metformin in patients diagnosed with esophageal squamous cell carcinoma.

Objective The aim of this study was to examine the impact of a modern lifestyle on college female students' health, specifically focusing on their hip and knee joint mobility. The objective of this study was to assess the influence of hydraulic resistance training with the self-myofascial release technique on improving joint mobility in female college students. The training also aimed to compare the effectiveness of hydraulic resistance exercise with and without the self-myofascial release technique on hip and knee joint mobility.Methods The study used a randomized controlled trial design to recruit 30 female college students aged 18-25 through campus advertisements and announcements. Medical conditions or injuries that might have affected participation was screened. Participants were indiscriminately allocated to Group A (Hydraulic Resistance Training with Self-Myofascial Technique) or Group B (Hydraulic Resistance Training without Self-Myofascial Technique). The baseline assessments included joint range of motion (ROM) measurements using a goniometer. Certified trainers supervised the training sessions, and the data were analyzed using SD and mean using SPSS. ResultsThis study aimed to evaluate the impact of hydraulic resistance training with self-myofascial release on hip and knee joint mobility in female college students. The results showed that both groups showed improved hip and knee flexion with and without the self-myofascial release technique. However, the Group A using the self-myofascial release technique (Group A) showed a more significant enhancement, as indicated by the smaller p value compared to Group B. It has been suggested that the self-myofascial release technique may improve hip and knee joint mobility. ConclusionThis study concluded that Hydraulic Resistance Training with Self-Myofascial Release (HSMR) could improve hip and knee joint mobility among female college students. These findings suggest that integrating the self-myofascial release technique into training regimens can improve joint mobility. However, further research with larger sample sizes and extended intervention periods was needed to understand the long-term effects and sustainability of these improvements.

Exisitng studies argue life chances are, in part, vertically reproduced. Such a statement is applicable to the Chinese contexts as, but not limited to, parental hukou status, to some extent, determines the life chances their children receive. In this essay, the author would like to introduce human capital theory (HCT) and educational signalling theory (EST), and assess how the applications of each of these two models can enrich the understanding of vertical reproduction of individuals’ social mobility opportunities. The author would also present the limitations of each of these two models when addressing relevant Chinese contexts.

The reliable online analysis of volatile compounds in exhaled breath remains a challenge as a plethora of molecules occur in different concentration ranges (i.e. ppt to %), and need to be detected against an extremely complex background matrix. While this complexity is commonly addressed by hyphenating a specific analytical technique with appropriate preconcentration and/or preseparation strategies prior to detection, we herein propose the combination of three analytical tools based on truly orthogonal measurement principles as an alternative solution: field-asymmetric ion mobility spectrometry (FAIMS), Fourier-transform infrared (FTIR) spectroscopy-based sensors utilizing substrate-integrated hollow waveguides (iHWG), and luminescence sensing (LS). These three tools have been integrated into a single compact analytical platform suitable for online exhaled breath analysis. The analytical performance of this prototype system was tested via artificial breath samples containing nitrogen (N2), oxygen (O2), carbon dioxide (CO2) and acetone as a model volatile organic compound (VOC) commonly present and detected in breath. Functionality of the combined system was demonstrated by detecting these analytes in their respectively breath-relevant concentration range and mutually independent of each other generating orthogonal yet correlated analytical signals. Finally, adaptation of the system towards the analysis of real breath samples during future studies is discussed.

Background: Schizophrenia and treatment-resistant schizophrenia (TRS) are associated with aberrations in immune-inflammatory pathways. Increased High Mobility Group Protein 1 (HMGB1), an inflammatory mediator, and Dickkopf-Related Protein (DKK1), a Wnt/β-catenin signaling antagonist, affect the blood-brain-barrier and induce neurotoxic effects and neurocognitive deficits.Aim of the study: The present study aims to examine HMGB1 and DDK1 in non-responders to treatments with antipsychotics (NRTT, n=60), partial RTT (PRTT, n=55) and healthy controls (n=43) in relation to established markers of schizophrenia including IL-6, IL-10 and CLL11 (eotaxin); and to delineate whether these proteins are associated with the schizophrenia symptom subdomains and neurocognitive impairments.Results: HMGB1, DKK1, IL-6 and CCL11 were significantly higher in schizophrenia patients than in controls. DKK1 and IL-6 were significantly higher in NRTT than in PRTT and controls while IL-10 was higher in NRTT than in controls. Binary logistic regression analysis showed that schizophrenia was best predicted by increased DDK1 and HMGB1 while NRTT (versus PRTT) was best predicted by increased IL-6 and CCL11 levels. A large part of the variance in psychosis, hostility, excitation, mannerism and negative (PHEMN) symptoms, and formal thought disorders was explained by HMGB1, IL-6, and CCL11 while most neurocognitive functions were predicted by HMGB1, DDK1 and CCL11. Conclusion: The neurotoxic effects of HMGB1, DKK1, IL-6 and CCL11 including effects on the blood-brain-barrier and the Wnt/β-catenin signaling pathway may cause impairments in executive functions, and working, episodic and semantic memory and explain, in part, PHEMN symptoms and a non-response to treatment with antipsychotic drugs.