This paper presents a study conducted to identify, assess, rank, and compare the most influencing factors causing schedule delay during construction phase of petrochemical projects in Saudi Arabia. The methodology followed in this research to achieve the main aims is a combination of comprehensive review of the literature and interviewing number of local experts, which have resulted in identifying of 23 factors. Through a web-based questionnaire survey, the identified factors were ranked. Total of 90 completed responses were gathered from 106 received responses. The completed responses gathered from 38 contractors and 52 owners. Of 90 participants, there are 32 project managers, 22 project engineers, 7 construction supervisors and the other 31 having different positions in projects departments The study has found that the most influencing factors causing schedule delay during construction in petrochemical projects in Saudi Arabia are “Poor site management and supervision by contractors”; “Conflict between main contractor and subcontractor”; “poor planning and scheduling of projects by contractor”; “Delay of material or equipment delivery”; and followed by “Delay in Handing Over Construction Site to Contractor”. This paper is original in the sense that the areas of knowledge and practice covered in the identified factors were distributed and not available in one source. The factors are derived from personal interviews with selected project managers, project engineers, construction supervisors and the others from different positions in project department and from the relevant literature.

In order to overcome the limitation of the traditional adaptive Unscented Kalman Filtering (UKF) algorithm in noise covariance estimation for statement and measurement, we propose a hybrid adaptive UKF algorithm based on combining Maximum a posteriori (MAP) criterion and Maximum likelihood (ML) criterion, in this paper. First, to prevent the actual noise covariance deviating from the true value which can lead to the state estimation error and arouse the filtering divergence, a real-time covariance matrices estimation algorithm based on hybrid MAP and ML is proposed for obtaining the statement and measurement noises covariance, respectively; and then, a balance equation the two kinds of covariance matrix is structured in this proposed to minimize the statement estimation error. Compared with the UFK based MAP and based ML, the proposed algorithm provides better convergence and stability.

Hybrid Renewable Energy Systems (HRES) integrate renewable sources, storage, and optionally conventional energies, offering an eco-friendly solution to fossil fuels. Microgrids (MGs) bolster HRES integration, enhancing energy management, resilience, and reliability at various levels. This study, emphasizing the need for refined optimization methods, investigates three themes: renewable energy, microgrid, and multiobjective optimization (MOO), through a bibliometric analysis of 470 Scopus documents from 2010-2023, analyzed with SciMAT software. It segments the research into two periods, 2010-2019 and 2020-2023, revealing a surge in MOO focus, especially in the latter period, with a 35% increase in MOO-related research. This indicates a shift towards com-prehensive energy ecosystem management that balances environmental, technical, and economic elements. The initial focus on MOO, genetic algorithms, and energy management systems has expanded to include smart grids and electric power systems, with MOO remaining a primary theme in the second period. The increased application of Artificial Intelligence (AI) in optimizing HMGS within the MOO framework signals a move towards more sustainable, intelligent energy solutions. Despite progress, challenges remain, including high battery costs, the need for reliable MOO data, the intermittency of renewable energy sources, and HMGS network scalability issues, highlighting directions for future research.

The gas-water relative permeability curve plays a crucial role in reservoir simulation and development for condensate gas reservoirs. In this study, we conducted a series of high temperature and high pressure analysis experiments on real gas cores from Wells A and B in Block L of the Yinggehai Basin to investigate the effects of temperature, pressure, and different types of gas media on gas-water seepage. The experimental results demonstrate that: Temperature has a significant impact on both gas and water relative permeability, particularly on the former. As temperature increases, gas relative permeability shows a substantial increase while water relative permeability remains relatively unchanged. Under the same effective stress, increasing pressure causes downward shifts in both the gas and water relative permeability curves; however, there is a more pronounced decrease in gas relative permeability. Gas type has minimal influence on phase permeability except at higher water saturation where differences become apparent. When water saturation ranges from 80% to 50%, there is no significant variation observed in the measured relative permeability of different displacement gases; however, as water saturation exceeds 80%, distinctions gradually emerge. At bound water saturation conditions, nitrogen exhibits lower relative permeability compared to simulated gases with approximately 92% similarity between them. This investigation into the characteristics of gas-water relative permeability in high temperature and high pressure condensate reservoirs within Yinggehai Basin provides valuable insights for efficient development strategies for similar reservoirs.

With the application of high-precision, enormous rotating equipment and the addition of harsh working conditions, the advantages of dry gas sealing technology are increasingly obvious. Herein, research on the dynamic stability of dry gas seals is reviewed based on their operating mechanism. The influence of the dry gas seal structure, vibration response, and dynamic followability on the reliability of the shaft end sealing system of rotating machinery is the focus of current dry gas sealing technology. This work reviews the research history; analyzes the key coefficient of instability of the sealing system under external disturbances and the existing research on stability models; discusses the influence of starting and stopping characteristics, working conditions, and groove parameters on the stability of dry gas seals; and points out the shortcomings in the existing research. In addition, potential developments in dynamic stability are proposed, including improving model accuracy, improving experimental techniques, or applying intelligent control and optimization methods to enhance the dynamic stability of the sealing system. Finally, the development prospects for dry gas sealing technology in intelligent monitoring and wide temperature range adaptations are discussed, and theoretical guidance for improving the dry gas seal system is provided.

With the growing trend of urbanization and the growing number of people migrating to cities, the demand for the development and construction of new buildings as well as the infrastructure has risen, meaning that the construction industry must adapt to the trends. The growing demands with shorter deadlines for an industry already known for high costs and not delivering on time means that productivity must be increased without increasing the cost. The solution for this might lie in the application of the Lean philosophy to the construction industry. This paper analyses the application of the Lean philosophy in order to increase the productivity in the airport construction site. The paper highlights the potential for enhancing productivity in construction workplaces by concurrently fostering continuous improvement and sustainability through the implementation of the A3 methodology and Lean principles, resulting in waste reduction and increased value.

Under the development mode of deep blending of emerging technologies, major projects are important for enhancing China's comprehensive national strength and independent innovation capability. Based on the social benefits of major projects, and considering the influence of reputation factors, an evolutionary game model composed of a general contractor and subcontractor of major projects is established. This paper studies the influence of various factors including the income distribution coefficient of collaborative innovation, and MATLAB simulation software is analyzed the influence of factors on an evolutionary path. The results show that a reasonable income distribution coefficient can promote the game behavior of both parties to the direction of active collaborative innovation; The reduction of innovation cost and the improvement of spillover technology absorption capacity can make innovation subjects tend to choose active collaborative innovation strategies. In addition, reputation loss above a specific threshold can effectively inhibit free-riding behavior and encourage innovation subjects to choose active collaborative innovation strategies. The research results provide reference for promoting major projects' technology innovation.

The Indorama Eleme Petrochemical Limited (IEPL) is found in the southern part of Nigeria more specifically on the Rivers State southern religion Nigeria. It consists of five distinct units, each of which generates its own unique trash at a rate of around 3115.98 tonnes per year. This study had the goal of concentrating on the management of the processing wastes in order to minimize the negative effects that they have on the environment. It is necessary to have an understanding of the number, nature, and make-up of IEPL's industrial wastes in order to effectively manage and regulate the development of waste there. As a result, we decided to collect data through the use of questionnaires. The classification of industrial wastes was accomplished by doing a comparative study and synthesis of research that were relevant to the management of petrochemical waste. Because an individual coding system is required for the integrated management of industrial waste, we gave each type of trash a code that consists of thirteen digits. The primary components of trash were catalysts (9.58 percent), metallic materials (7.62 percent), plastic barrels (35.77 percent), coke (12.66 percent), wood (4.47%), oil (4.15%), glass (0.028 percent), cooling tower packaging (6.7 percent), and other material (18.83 percent). According to the findings of the investigation into the physical qualities of the wastes, only 11.81% of these residues were liquid, while 88.19% were solid. The current handling of these wastes has been experiencing significant difficulties as of late. garbage management at IEPL was particularly challenging due to the wide variety of wastes produced there and the dangerous nature of the wastes themselves (88.19% of garbage was hazardous waste). Recycling and reuse of garbage may have been the greatest decision in some situations; yet, incineration and disposal of waste are also necessary options.

5-(4-aminophenyl )-2-amino -1,3,4-thiadiazole was prepared by reaction of Thiosemicarbazide with 4-amino benzoic acid under reflux condition for 7 hours. The compound which has been synthesized successfully was subjected to addition reaction with 4-(Dimethylamino) benzaldehyde under reflux condition for 6 hours to synthesize Schiff bases. These compounds was characterized by using FTIR) and evaluated for their anticancer activity. The effect of (1, 3, 4-thiadiazole derivative) on the activity of malignant cells was studied by using different types of cell lines [Breast cancer, and human prostate cancer]. And was used the Electron microscope to show that the effect of the derivative on the cancer cells before and after 3 days of the injection time. It was found that the Schiff base of thiadiazole-1,3,4-(Dimethylamino)benzylidineamino]- [4-2-phenyl]amino was effective in reducing the size and density of malignant cells. That of 46.7 while in breast ) 145(DUprostate for growth inhibition produce of equal 85.9 µg/ml.

As the control brain of the petrochemical plant, blast resistant performance requirements of the petrochemical control room should be guaranteed when the vapor cloud explosion occurs in the petrochemical production process. 3D-Kagome truss core sandwich structure is a kind of blast resistant material with high energy absorption. Considering the influence factors of the radius of the truss core rod and thickness of the upper and lower panels, in this paper, blast resistant performance of a real steel petrochemical control room with 3D-Kagome truss core sandwich wall is analyzed. With the optimization goal of plastic deformation energy and panel displacement, the optimal wall thickness and radius of the truss core rode are obtained. The optimized blast resistant wall is assembled, and the dynamic response of the steel petrochemical control room with the 3D-Kagome truss core sandwich blast resistant wall is analyzed. The simulation results show that the truss core layer does not dissipate the blast energy effectively when the radius ratio of the truss core rod is larger than 2.7% of the total thickness of the wall; with the increase of the thickness of the upper and lower panels, the proportion of plastic deformation energy of the truss core layer increases gradually and then tends to be a stable proportion value, that is about 90%; When the thickness ratio of the panel is 6.7% of the total one of the wall and the radius ratio of the truss core rod is 2.7% of the total thickness of the wall, the optimal blast resistant 3D-Kagome sandwich wall is determined.

This study derives space travel pricing by Walrasian Equilibrium, which is logical reasoning from the general relativity theory (GRT), the accounting equation, and economic supply and demand functions. The Cobb-Douglas functions embed the endogenous space factor as new capital to form the space travel firm's production function, which is also transformed into the consumer's utility function. Thus, the market equilibrium occurs at the equivalence of supply and demand functions, like the GRT presents the equivalence between the spatial geometric tensor and the energy-momentum tensor, which explains the principles of gravity and the motion of space matter in the spacetime framework. The mathematical axiomatic set theory of the accounting equation explains the equity premium effect that causes a short-term accounting equation inequality, then reaches the equivalence by suppliers' incremental equity through the closing accounts process of the accounting cycle. On the demand side, the consumption of space travel can be assumed as a value at risk (VaR) investment to attain the specific spacetime curvature in an expected orbit. Spacetime market equilibrium is then achieved to construct the space travel pricing model. The methodology of econophysics and analogy method was applied to infer the space travel pricing by the model of profit maximization, single-minded, and envy-free pricing in unit-demand markets. A case study with simulation was conducted for empirical verification of the math models and algorithm. Results show that space travel pricing remains the principle of market equilibrium but needs to be extended to the spacetime tensor of GRT.

ABSTRACT"In the realm of the industrial complex, a pressing concern lies in optimizing resource utilization and enhancing energy efficiency. This critical issue finds strong support from a variety of government programs, strategies, and regulatory documents. To effectively tackle this challenge and revolutionize petrochemical production, it is imperative to establish and develop innovative mechanisms. One such mechanism involves harnessing the power of automation and advanced Industry 4.0 technologies to streamline production processes. By doing so, we can unlock the full potential of these systems, driving operational efficiency, conserving valuable reserves, and propelling innovation within the petrochemical industry."The article delves into an in-depth analysis of the prominent trends in the application of the "Industry 4.0" concept within the petrochemical industry. It sheds light on the various factors that impact the efficiency of organizing production systems. Additionally, the article identifies the primary avenues that drive the advancement and enhancement of production organization practices. Moreover, the article explores the fundamental tools employed for process improvements and highlights the significance of process automation in petrochemical plants. By examining these key aspects, it aims to provide valuable insights and recommendations for leveraging Industry 4.0 technologies to optimize production processes in the petrochemical industry..The study focuses on examining and evaluating various systems and technologies that contribute to the optimization of production processes within the petrochemical industry. Specifically, it delves into the implementation and benefits of the just-in-time system, the 5S system for workplace rationalization, as well as different information systems including ERP systems and CALS-technologies. By exploring these systems and technologies, the article aims to identify the advantages of automating production processes within the petrochemical complex. This analysis will unveil the potential benefits such as improved efficiency, reduced waste, enhanced productivity, streamlined operations, and increased overall competitiveness. Through this research, we aim to shed light on the value of these automation solutions and their impact on driving the petrochemical industry towards greater success.

Using SNA techniques, the study examined H2020 forestry projects. An adjacency matrix was created using the CORDIS data collection, and it was then utilized to depict the network of project members. Then, different network indicators were computed. Several statistical techniques (maximum likelihood, Kolmogorov-Smirnov test, moments, bootstrapping) were employed to do a goodness-of-fit analysis on the frequencies of the degrees to confirm scale-freedom or randomness in the search for significant distributions in network research. Additionally, the small-world aspect was investigated. The findings demonstrate that while the number of project participations by project participants follows a power distribution, the distribution of project participants’ degrees reflects various effects. As a result, the scale-freedom that has been emphasized in many scientific investigations is not evident. The network indicators demonstrate that the network is not clearly small-world.

Most petrochemical plants still maintain a Proportional-Integral-Differential controller(PID) system, which is a feedback control system. However, gradually, the PID system is being extended and introduced to the Advanced Process Controller (APC) system, which is an integrated control system of feedforward and feedback that predicts external influences in advance. In the process of conducting on-site plant tests and calculating APC model parameter for the application of APC systems, a problem arises that Model Parameter are implemented differently depending on the proficiency of APC engineers. To minimize this problem, a technique for estimating APC model parameter without a plant test is required. In order to estimate the APC model parameter, it is necessary to train on dynamic interval data. In this paper, we use statistical techniques such as PELT, Linear Kernel, and Radial Basis Function Kernel of Change Point Detection (CPD) to extract dynamic data with minimum Mean Absolute Error (MAE) from time series data of a real petrochemical plant. Then, the hyper parameter is fixed and the APC model parameter is estimated by learning the dynamic section data. By applying the estimated APC model parameter to the APC Model Tool and measuring the fitting rate, it was confirmed that it is possible to estimate the APC model parameter with excellent control performance without plant test.

Context: As software industries, adopted different frameworks where Scrum is play a vital role in different software industries. Scrum basis the three main stakeholders i.e. Product Owner, Scrum Master and Development. Where Scrum Master is a very crucial role for any agile project. However, in the past Scrum Master Faces different challenges, which discovered in several studies. However, we need to measure the effectiveness of the Scrum master in Agile Projects, how presently Scrum Master are performing in Pakistani software industries. Objective: The main objective of this research to identify the effectiveness of the Scrum Master in agile projects in Pakistani software industries. Method: Research Method (Qualitative Research) For this purpose, we gathered the facts from Pakistani software industries by using the qualitative method. We conducted a survey from different software industries; almost 12 participants responded the survey as per their best knowledge as well as they agreed for face- to-face interviews. Results: The results indicated that, mostly organization compliance with the Scrum ceremonies. In addition, 65% Scrum Masters has a great effectiveness in any agile project. 21% of Scrum Master generates negative impact in agile project. Conclusion: The main highlights of this research, we have presented the compliance of the Scrum in different software organization. Further, we explore the both positive and negative impact of the Scrum master in Pakistani software organizations.

This study identified, analysed, and prioritised significant factors for standardising the Korean smart city project evaluation system. We analysed the efficiency and productivity of companies currently providing smart city services to consider both policy and practical aspects. The prioritisation of smart city planning reflects the latest trends in South Korea, where urban planning is moving towards smart city planning. Furthermore, the capacity building of public-private/private-private partnerships indicate the importance of business scalability. This indicates that smart city services are only stabilised when the private sector is involved and leads the project, rather than focusing on public development. The feasibility of building intelligent facilities indicates that smart city projects should be implemented after securing cost-benefit feasibility. The results were used as the basis for building an evaluation system, showing that in smart city convergence alliances, small- and medium-sized enterprises achieved the highest efficiency by reducing inputs to 81% and 86%, under the assumptions of constant and variable returns to scales, respectively. As the operational aspect is more problematic than the technical aspect, policy alternatives are necessary for smooth business progress, including increased flexibility of laws and institutions and the activation of policies that temporarily relieve regulations to demonstrate smart city projects.

Individuals and their leadership competencies have been the sole focus of project leadership research, rather than the project leadership's behaviour and functions in project and organizational settings. As a result, this study investigates the project leadership functions and behaviours required for various project and organizational situations in order to propose a project leadership model that will be effective in all project and organizational situations. The model that was developed and tested in this study theorized on the project leadership function that project leaders are expected to perform as a result of their positions. It also described how project leaders could tailor their leadership functions and behaviours to address issues related to positions, organizational situations, and project situations. Three hypotheses were developed and tested using structural equation modelling to validate the model. The model's perceptive power demonstrates adequate validity. The model's validity implies that there are appropriate project leadership functions for different leadership levels and circumstances. The model's validity also implies that each project leadership behaviour has its own value, as conditions and necessities dictate. The study assumes that a project leader can embrace project leadership by combining a few different project leadership functions and behaviours.

Intelligent cities or smart cities evolve bottom-up along with the digitisation and the creation of digital entities linked to human activities, physical space, and institutional settings of cities; but also, they progress top-down through smart city strategies and projects designed and implemented by public authorities. Yet, thirty-five years since the first use of the term “smart city” or “intelligent city” in the second half of the 1980s, and more than ten years of intense publications in this field, since 2009, there is still a great deal of fuzziness about the projects that make cities intelligent or smart. There is low awareness about the big differences between large, complex urban projects, such as ‘Zero Energy Districts’ or “Mobility-as-a-Service” and projects for automation of city infrastructures, such as smart city lighting, smart metering or finding a parking place. There is a widespread misconception that city intelligence or smartness, the core attribute of smart cities, can be achieved through automation of the city infrastructure. This paper focuses on projects that make cities intelligent or smart. Our intention is to show the complexity and effort needed to achieve this objective. It is an inquiry on projects and data from a large number of smart cities around the world. We analyse core properties of smart city projects, such as (a) interventions on the physical, social, and digital space of cities, (b) the relation to city sectors and ecosystems, (c) engagement of users and stakeholders in decision-making, and (c) impact through optimisation and innovation of city processes and routines. We discuss also projects we have designed and implemented in the framework of URENIO Research and ITI-CERTH. Our conclusions are two-fold. First, we propose a typology of smart city projects along 3 axes and 9 properties. Second, we argue that success and failure to achieve city smartness are mainly institutional. Most barriers to implementation are organisational, legal, and institutional. This can be explained by the social and institutional inertia of the urban system against new solutions, especially when innovation and radical change of existing routines take place. Change management should be a permanent companion of smart city projects implementation, and the modification of routines should be clearly defined and considered already at the design phase of projects.

Building Information Modelling (BIM) methodology have been optimizing the construction activity in all sectors: multidisciplinary designs development; construction planning and monitoring; building management and maintenance. A BIM environment aggregates several disciplines and different skillsets and in order to control and improve the quality of a BIM project, a BIM manager is required. The BIM manager has the responsibility to coordinate all tasks involved in a building design and associated activities usually workout over the project documents. The professional can access to various discipline models, located in a shared board, and request for amendments if inconsistencies are detected. The present study issue is illustrated with three building cases were distinct specific projects, disciplines and tasks were elaborated: collaboration between disciplines (architecture, structures and construction); structural analyses and reinforcement details; quantity take-off of materials and cost estimation; construction scheduling and simulation. Although there are limitations in the implementation of BIM methodology in all sectors and stages, within the construction industry, BIM have been bringing an important improvement in the quality of a building design, reflected in the quality of the final product. BIM methodology is a current demand in the construction industry supported on advanced technology and in an adequate management of projects, were the BIM manager has an important role.

Long-term, multi-decade research on planted tree survival in urban settings is sparse. One understudied urban environment is highway rights-of-way (ROW), lands adjacent to high-speed, unsignalized roadways. We conducted a re-inventory of tree planting cohort in northern Illinois, U.S. on a 48 km-long highway near Chicago which were 10-, 21-, and 30-years old to evaluate long-term patterns of survival and diversity. Using each randomly selected planting site along the highway as a unit of observation and analysis, we compared the number of trees documented in record drawing to the number of trees currently alive to determine percent survival. We evaluated 224 planting sites which originally contained 2,944 trees and collected data about the planting site location. For the oldest cohort, 26% of trees were still alive in 2018 (median survival by species = 16%, Q1 = 0%, Q3 = 48%), while 31% of the 21-year-old cohort (med. = 6%, Q1 = 0%, Q3 = 47%) and 86% of the 10-year-old cohort were still alive (med. = 85%, Q1 = 74%, Q3 = 96%). The survival of the 21- and 30-year-old cohort matches urban tree survival estimates by other researchers, while the 10-year-old survival is higher than expected. The only planting location characteristic that significantly affected survival was traffic islands (areas between the highway and entrance/exit ramps). Species with low drought tolerance were less likely to be alive for the 10-year-old cohort. Waterlogging tolerant species were more likely to be alive in the 10-year-old cohort. Since some species in the 21- and 30-year-old cohorts had very low survival, the tree species richness and diversity s in study areas declined between the initial record drawings and reinventory. This study demonstrates the challenges of maintaining long-term survival and diversity in the highway ROW and emphasizes the importance of species selection.

Objective:The application of information technology (IT( is fundamental in the hospitals to stay competitive.In this regard, recognizing the main risks to the implementation of IT in hospitals can provide vastopportunities to improve its efficiency and help to make strategic decisions. This study aimed tosearch for the main risks of implementation of IT projects in the hospitals of Tehran. Methods: This was a practical and cross-sectional study which was conducted in the 18 hospitals of Tehran,Iran, 2018; in which a sample of 65 members were studied. The required data were collected using a questionnaire to examine seven main risks, including market, project management, human resources, technical, organizational, financial, strategic risks. The collected data were analyzed using SPSS 19.0. Additionally, the method used to test the risks in this study was structural equation modeling, which was ran using LISREL 9.30. Results: The results showed that among the seven main risks of to the implementation of IT in hospitals, the highest and lowest means were related to the human resource risks and the market risks, respectively. Also, according to the SEM, human resource risks and market risks had the highest and lowest effects, respectively. Conclusion: Announcing the use of IT in the hospitals, holding conferences about new IT developments with employees, suitable training, encouraging them to use IT tools, providing a motivating atmosphere to use IT tools for employees, are a few effective ways of overcoming the human resource risks.

The present essay illustrates the methodological and theoretical premises of an emerging research area carrying out both ethological and (bio)ethical implications: the ethology of the freed animal (EFA). Unlike existing ethological fields, EFA focuses neither on non human (NH) animals in natural conditions of freedom in their own environment, nor on NH animals kept in conditions of “captivity”. Rather, EFA consists of a comparative study of NH animals that are released from a condition of more or less abusive captivity and instead relocated in an environment more appropriate to their species-specific and individual characteristics and inclinations. Ideal places for this study are contexts like “Animal sanctuaries” and parks/reserves provided with a camp or station for researchers, where a previously-captive NH animal can be reintroduced in his/her natural habitat. Even though EFA exists already, as a de facto practice of the specialized and/or volunteer personnel running sanctuaries and parks, the field still lacks a recognizable scholarly paradigm, and it is yet to be acknowledged at institutional/academic level. By consequence, one important aim for creating a field like this lies in the establishment of an active interaction between the two parties involved (researchers and sanctuaries/parks operators).

The purpose of this study is to analyze the causes of cost variation in natural disaster prevention projects (NDPP) in Gyeongsangbuk-do and to develop effective cost and risk management strategies. The study collected data by conducting an online survey of 244 stakeholders. Binary logistic regression was used to analyze the impact of various variables on cost deviation, in-cluding project management risk (PMR), project costing and execution risk (PCER), project exe-cution strategy risk (PESR), construction project risk (CPR), project cost and schedule risk (PCSR), project management challenges (PMC), and construction project subcontractor and safety man-agement (CPSSM). The results showed that PMR (OR=3.744, 95% C.I. [1.657, 8.457]), PCER (OR=5.068, 95% C.I. [2.236, 11.484]), PESR (OR=3.447, 95% C.I. [1. 853, 6.413]), CPR (OR=2.292, 95% C.I. [1.020, 5.151]), PCSR (OR=4.817, 95% C.I. [2.250, 10.317]), PMC (OR=2.954, 95% C.I. [1.452, 6. 013]), and CPSSM (OR=2.419, 95% C.I. [1.297, 4.515]) had statistically significant effects on cost deviation. In particular, PMR, PCER, and PESR were identified as the main causes, and the effects of additional factors such as CPSSM were also important. The developed predictive model plays an important role in helping stakeholders of NDPP to manage risks in advance and take appro-priate preventive measures to ensure the success of the project. This study empirically supports the theoretical hypotheses of previous studies and provides a clear understanding of the causes of cost deviation in NDPP, which provides important insights for strategic decision-making and provides a new perspective on risk management.

The case for demand-driven research and development has received important considerations among governments, donors and programme implementing partners in development planning and implementation. Addressing demand is believed to be a bottom-top approach for designing and responding to development priorities and is good for achieving development outcomes. In this paper, we discuss the concept and application of demand driven research for development (DDRD) in Africa. We use evidence of six projects implemented under the BiomassWeb Project in Africa. We focus on parameters on level of engagement of stakeholders - whose demand is being articulated, the processes for demand articulation, capacity building and implementation processes, innovativeness of the project, reporting and sustainability of the project. We find that the nature of the institutions involved in articulation and implementation of demand-driven research and development projects and their partnerships influence the impact and reporting of demand-driven projects.

This study focuses on the difficulties of standardizing Building Information Modeling (BIM) Execution Plans (BEPs) in the Architecture Engineering Construction and Operations (AECO) sector. The main objective is to improve digital transformation by implementing more efficient methodologies. The task involves analyzing 36 BEP documents from different international organizations to identify similarities and differences in terms of content structure operational methods and project characteristics. The research highlights the necessity of implementing a uniform method to enhance collaboration and information sharing in BIM projects. The documents contain key elements such as project information goals roles collaboration procedures model structure and quality control. The paper presents a comprehensive framework for BEPs with the goal of resolving the discrepancies observed in existing methods that impede the efficiency of project delivery. This study utilizes scientometric analysis to examine literature published between 2020 and 2023. The aim is to track the progress of BEP standards identify key research topics and determine influential works in the field. The findings support the implementation of standardized guidelines to reduce inefficiencies and improve the effectiveness of Building Information Modeling (BIM) in large-scale construction projects.

Across the global construction industry, fatalities continue to occur from high-risk activities where the risk controls have been defined, however were unreliable. In the mining industry, Critical Control Risk Management has provided positive results in reducing major accidents, which raises the question, could the Critical Control approach reduce the fatality rate in the construction industry? This study analysed 10 years of serious and fatal incident investigation reports from four international construction companies to i) assess the reliability of their Critical Controls (CCs) and ii) assess the factors which affect the reliability of CCs. The results show the reliability of CCs, measured by implementation and effectiveness, averaged just 42%. Human performance factors including risk identification, decision-making and competency together with supervision, job planning, communication organisational factors were identified as affecting the reliability of CCs. The study used bow-tie diagrams with real event data to find the actual CC effectiveness. This gave actionable findings directly related to individual CCs enabling the participating organization to focus resources on improving specific verification processes. The results confirm the applicability of CCs for the Major Accident Event hazards analyzed and highlights further review is required of the factors which need to be considered when implementing a CC program. This paper details our methodology and results, to assist others apply CCs as a risk management tool.

forging a resilient path towards a low carbon future, this research delves deep into the intricate dynamics of the petroleum and petrochemical industries. By uncovering the challenges posed by transitioning to a low carbon economy, this study emphasizes their transformative potential as catalysts for growth. Through an in-depth analysis of the oil and natural gas sector, it not only sheds light on the carbon footprint of Nigeria's petroleum and petrochemical industries but also identifies the opportunities for sustainable transformation within these sectors. Ultimately, this research aims to pave the way for a greener future by unraveling the complexities and intricacies of building a low carbon economy."By incorporating the unique attributes of the petroleum and petrochemical industries and considering the evolving domestic and global context, this research investigates the challenges and prospects associated with the shift towards a low-carbon economy. It delves deep into the complexities of the sector, taking into consideration the distinct characteristics of petroleum and petrochemical production. Through a comprehensive analysis, this study aims to uncover the potential barriers and opportunities that arise from the pursuit of a sustainable and low-carbon future within the petroleum and petrochemical industries. In addition, this research thoroughly examines the current global and local conditions, shedding light on the opportunities for growth and transformation within the petroleum and petrochemical sectors. By presenting insightful perspectives and recommendations, the study aims to provide valuable guidance for fostering the development of a low-carbon economy within these industries. Ultimately, the research seeks to drive positive change by offering actionable insights and strategies to propel the transition towards a sustainable future.

Risk management strategies protect the company as a whole as well as employees from unforeseen financial impacts. As in the case of personal finance, preparing for certain scenarios helps to face any difficulties that the company may encounter and allows it to get out of this impasse.For any project to be successful, the way the project executing agency will deal with potential risks must be determined so that it can identify, mitigate or avoid problems when it needs to do so. Successful project managers realize that risk management is important, because the achievement of project objectives depends on planning, preparation, results and evaluation that contribute to the achievement of strategic goals, especially the sustainable development of societies.Risk management strategies work to protect the company as a whole as well as employees from unexpected financial effects, and as is the case in personal finance, preparing for certain scenarios helps to face any difficulties that the company may face and allows it to get out of this impasse.To ensure the success of your project, determine how you will handle potential risks so that you can identify, mitigate or avoid problems when you need to do so. Successful project managers understand that risk management is important, because the achievement of project objectives depends on planning, preparation, results, and evaluation that contribute to the achievement of strategic objectives.

This article aims at presenting the results that were found in the design and implementation of a new management model of Critical Success Factors for improving the effects of research projects. The model was based on the theory of structural equations derived from factor analyses and multiple linear regression models. For achieving the purpose, the authors developed an empirical evidence analysis founded on a literature review in the knowledge area of project management. Afterwards, the process of identification of the CSFs was carried out for a group of research projects launched in Colombia as a result of the application and measurement of an instrument. They were the basis for the development of a structural relationship modeling. Also, this contributed to determine the CSFs that explain the generation of effects of research projects, and the project management execution process from which it can be carried out based on said measurement indicators.

Multi-stakeholder based construction projects are subject to various risk factors due to dynamic business environments. These risks affect project activities which indirectly impact construction costs, resulting in delays and poor building quality. So, managing these project risks requires suitable risk mitigation strategies to evaluate and analyse their severity. Hence, risk evaluation and assessment of construction projects is a multi-criteria decision making (MCDM) problem. In present real-life problems, evaluation of project risks is often uncertain and even incomplete, and the prevailing methodologies fail to handle such situations. To address the problem, this paper extends the analytical network process (ANP) methodology in the D number domain to handle three types of ambiguous evaluations, viz. complete, uncertain, and incomplete, and assesses the weight of risk criteria. The D number based approach overcomes the deficiencies of the exclusiveness hypothesis and completeness constraint of Dempster-Shafer (D-S) theory. Here, preference ratings of the decision matrix for each decision-maker are determined using a D number extended consistent fuzzy preference relation (D-CFPR). An extended multi-attributive border approximation area comparison (MABAC) method in D number is then developed to rank and select the best alternative risk response strategy. Finally, an illustrative example from construction sector is presented to check the feasibility of the proposed approach. For checking the reliability of alternative ranking, a comparative analysis is performed with different MCDM approaches (D-COPRAS, D-ARAS, D-MABAC, and D-TOPSIS). Based on different criteria weights, a sensitivity analysis of obtained ranking of the hybrid D-ANP-MABAC model is performed for verify the robustness of the proposed method.

This paper focuses on leveraging a cutting-edge 3D state-space model for a holistic eco-friendly assessment in petrochemical operations. - By applying the ecological carrying capacity theory and the three-dimensional state-space model, this research aims to unleash the next frontier of sustainability in the petrochemical industry. - The proposed methodology will enable advanced and comprehensive eco efficiency evaluation in petrochemical operations. - Through the integration of the ecological carrying capacity theory and advanced modeling techniques, this research seeks to revolutionize sustainability assessments in the petrochemical sector. - The utilization of the cutting-edge 3D state-space model will provide a more advanced and accurate understanding of eco-friendly practices in petrochemical operations. This research presents a unique approach distinct from existing literature, which primarily examines business eco efficiency from behavioral motivation and strategic perspectives. In contrast, this paper introduces a novel three-dimensional state-space model to evaluate the ecological efficiency of petrochemical operations. By combining the ecological carrying index and state space, this model represents the ecological impact of petrochemical operations in a three-dimensional geometric space. It considers petrochemical operations as a significant factor exerting pressure on natural resources and the natural environment. In this three-dimensional state-space model, the three axes represent different dimensions of petrochemical operations. The first axis represents the economic status, which quantitatively describes the financial aspects of the operation. The second axis represents the utilization of resources, capturing the extent to which resources are consumed in the operation. The third axis focuses on the impact of the operation on the environment, allowing for a quantitative assessment of its ecological footprint. By incorporating these dimensions, the model aims to provide a comprehensive and quantitative description of the economic activities of petrochemical operations and their interactions with resources and the environment.The primary focus of this research is to apply the three-dimensional state-space model to calculate the ecological carrying capacity of petrochemical operations. By doing so, it aims to verify the feasibility and applicability of the model in determining the ecological efficiency of these operations. The research also aims to provide theoretical tools that can assist operations in making more informed ecological efficiency judgments. By utilizing this model, petrochemical operations will have a quantitative framework to assess and improve their environmental impact, thus fostering more sustainable practices. The findings of this research demonstrate that the implementation of this method can effectively identify issues related to resources, economy, and environment throughout the development of petrochemical operations. By identifying these problems, it provides managers with a solid foundation for making strategic decisions that promote sustainable development. With this valuable information at their disposal, managers can proactively address challenges, optimize resource utilization, and minimize environmental impacts, thus steering the petrochemical operations towards a more sustainable and responsible path.

This study investigates the complex role of financial risks in the context of public–private partnerships (PPPs) in India and their relationship to the amount and extent of investments made by private partners (s). We hypothesize that subsidies, bid criteria, and risk have a positive relationship with investments made by private partners. A project’s leverage moderates these relationships. Regression was used to analyze the hypotheses using SPSS 24 and PROCESS Macro. Data from the World Bank were collected from 2009 to 2019 for the study variables. Interestingly, our research finds support for these relationships that may seem contrary to some commonly-held notions of risk relationships, such as – the government using ‘viability gap’ funding to attract private investment and ‘leverage’ does not moderate the relationship between risk assumed and private investment. This study is among the first to recognize and elaborate on financial risk relationships, specifically in the context of Indian PPPs. These findings are significant for both private and public participants in terms of financial considerations in PPP projects, especially in emerging markets.

With growing global concern of food and water insecurity, an efficient method to monitor irrigation projects is essential, especially in the developing world, where irrigation performance is often suboptimal. In Nepal, the irrigated area has not been objectively recorded, although their assessment has substantial implications on national policy, project’s annual budgets, and donor fund-ing. Here we present the application of Landsat images to measure irrigated areas in Nepal for the past 17 years to contribute to the assessment of the irrigation performance. Landsat 5 TM (2006-2011) and Landsat 8 OLI (2013-2022) images were used to develop a machine-learning model which classifies irrigated and non-irrigated areas in study areas. The random forest classification achieved overall accuracy of 82.2% and kappa statistics of 0.72. For the class of irrigation areas, the producer’s accuracy and the consumer’s accuracy were 79% and 96%, respectively. Our regionally trained machine-learning model outperforms the existing global cropland map, highlighting the need of such models for local irrigation project evaluations. We assess irrigation project performance and its drivers by combining long-term changes in satellite-derived irrigated area with local data related to irrigation performance, such as annual budget, irrigation service fee, crop yield, precipitation, and main canal discharge.

An updated, binary-coded message has been developed for transmission to extraterrestrial intelligences in the Milky Way galaxy. The proposed message includes basic mathematical and physical concepts to establish a universal means of communication followed by information on the biochemical composition of life on Earth, the Solar System’s time-stamped position in the Milky Way relative to known globular clusters, as well as digitized depictions of the Solar System, and Earth’s surface. The message concludes with digitized images of the human form, along with an invitation for any receiving intelligences to respond. Calculation of the optimal timing during a given calendar year is specified for potential future transmission from both the Five-hundred-meter Aperture Spherical radio Telescope in China and the SETI Institute’s Allen Telescope Array in northern California to a selected region of the Milky Way which has been proposed as the most likely for life to have developed. These powerful new beacons, the successors to the Arecibo radio telescope which transmitted the 1974 message upon which this expanded communication is in part based, can carry forward Arecibo’s legacy into the 21st century with this equally well-constructed communication from Earth’s technological civilization.

The comfort of human life depends on the quality, size, and reliability of the infrastructure projects. In the infrastructure systems, rapid growth is found, where the economic and sustainable impact has become a topic of significant concern for policies and government officials. To achieve con-straints of sustainable development, all the policies and actions over the infrastructure project's life cycle must be assessed. Decision-makers have adopted approaches for economic, social, and en-vironmental initiatives through Life Cycle Assessment (LCA) and Life Cycle Cost Analyses (LCCA) of infrastructure projects. The purpose of this review is to highlight the impact of per-forming LCA and LCCA in infrastructure projects. To achieve this goal, a systematic literature review methodology is adopted in which renowned databases, i.e., Web of Science, Science Direct, Emerald and Scopus were selected to extract the relevant literature. Using the PRISMA approach, 1251 publications were identified which were then filtered and 55 documents were included in the final review. In the extracted publications most, researchers were biased toward LCA and LCA individually, whereas few focused on integrated LCA and LCCA. The researchers assessed the costs and impact associated with the infrastructure project while there were less focused on the environmental cost. Besides this, techniques of economic, social, and environmental growth of infrastructure projects have been emphasized during the design phase because of substantial relations between infrastructure design and operation management. Moreover, a conceptual framework has been developed that will assist the decision-makers to consider the effects of LCA and LCCA on various aspects of the infrastructure project and how it impacts sustainability. In the last, a case study was performed to assess the developed framework with the incorporation of environmental impact cost.

This research describes a detailed analysis in the enactment of a Lean Tool, the Last Planner System during pandemic period which helps in optimizing the resources for better coordination among all stakeholders in pandemic period. LPS as it is known, focusses on minimizing the factors such as uncertainties, barriers and variability to make construction projects more flexible for better project management. These include variations and deviations, supervision, delays in approvals, change resistance, subcontractor dedication which are all related to various stakeholders in the project. Following that, a Design Science Research technique is used to evaluate the effect of applying LPS in buildings. An action strategy is being used to attain this goal, and four case studies were being documented which were concerned in the implementation of LPS in the building of the Boy's Hostel, Research Scholar Quarters, Faculty Housing, and Girls' Hostel at Chennai, Tamilnadu, India. Data was gathered by observation of site activities, interviews, documentation analysis, and a questionnaire survey and grouped into various factors. While adopting the LPS tool in the research the factors affecting the implementation were found in the covid-19 pandemic period. Further these factors were anlayzed, measured, ranked and validated for adopting in projects.

Today, the world is undergoing a major investment cycle in infrastructure, which is vital for the development and prosperity of countries and society. Management deficiencies in infrastructure projects are well known and some of them concerns weak engagement of project stakeholders. Importance of stakeholder engagement as the key success factors for infrastructure projects is recognized. However, the literature gives very few answers how this process manifests in projects. Some scholars concluded that it is a complex and undertheorized management process which necessitates more empirical research. The research questions seek to identify how practitioners perceive the stakeholder engagement, who implements activities and processes related to engagement and in what way, which organizational aspects influence the process and how success is achieved in infrastructural projects. Interviews were conducted with eight experienced experts who participated in a whole series of (complex) infrastructure projects. The interviews examined all aspects of the engagement of stakeholders in detail, and a thematic analysis was carried out. Based on the analysis, success/failure factors related to the stakeholder engagement process were defined. As a result, a framework model for engaging stakeholders and achieving success in infrastructure projects is presented, which is based on three management levels and three levels of project success.

Social sustainability is the major concern of planners and local officials when urban renewal projects are being conducted. Extreme individualism can potentially cause conflicts of interest, making urban renewal in Western cities fraught with various types of social risks. As a country with deep-rooted socialist tradition, urban renewal projects in China are influenced by collectivist culture and show different features from those of the West. The objective of this research is to investigate how different stakeholders in urban redevelopment projects, including local residents, social organizations, the local state, and developers, interact with each other and how the associated social risks are hedged against. Using a recent well-known project in the city of Guangzhou, the authors attempt to present the latest progress in social risk management in China. With the support from a government-sponsored project, the authors have conducted a questionnaire-based survey and year-long follow-up fieldwork. Using ATLAS.ti software, we found that that “residents’ demand”, “status of collaboration”, and “degree of trust” are the keys to risk management. The results of an ordered probit model show that residents are worried about the overall planning, the relocation timetable, and whether their personal needs are taken into account. It is also indicated that the timely disclosure of project information, high-quality public participation, and a reasonable compensation plan can possibly boost the support rate. The authors suggest that utilizing China’s collectivist culture could be an effective way to mitigate social risks, and residents’ personal interests should also be respected.

Some researchers in Taiwan argue that the current mechanism by which government subsidies are allocated for smart city demonstration projects warrants improvement. A comprehensive literature review determined that the development potential of smart cities should be prioritized in site selection for such demonstration projects. This study developed an evaluation framework on the basis of multi-criteria evaluation methods to enable the identification of suitable smart community demonstration sites. Evaluation criteria were first identified through the Delphi method. Next, the weights of each criterion were derived through the analytic hierarchy process. Furthermore, the capability of the proposed evaluation model was determined through simulation testing.

Diverse development models, including waterfall development, iterative development, and agile development, have been put forth and implemented across real-world contexts. When engaging in discussions on project management, the examination and exploration of development models assume paramount importance and are integral. This paper embarks upon an investigation and scrutiny of these development models, culminating in the proposition of "Quasi" Development Models: Quasi-Waterfall and Quasi-Agile.

This research article presents the integration of participatory modeling and system dynamics as a novel methodology for the consolidation of social dynamic models for the subsequent evaluation and prioritization of green projects in Colombian post-conflict communities. In the first instance, through participatory work carried out along with the community, it was possible to identify, evaluate and systematize citizen factors in relation to the problems and needs of the region. Second, based on the results obtained, to calibrate a simulation model based on system dynamics that facilitates decision making with regard to the evaluation of green projects. The proposed methodology leads to the conclusion that, with the participation of the community and with a model based on the dynamics of variables such as supply and demand for natural resources of water and land, it is possible to warn decision makers about the variables that can lead to the maximization of investments and thus prioritize and select the most appropriate environmental, social or economic initiatives, that certainly meet the needs or expectations of the involved community. In the future, the model could be used to facilitate the management, administration and control of water and land resources by creating alerts called reserve margins.

This comprehensive article explores the intricate responsibilities of executives leading AI projects within the framework of Federal Directives, specifically Executive Order 14110 and Executive Order 14091. The executive role is dissected, covering aspects such as defining leadership in the AI context, historical perspectives, current trends, and challenges in AI project leadership. The article delves into the significance of Federal Directives, particularly Executive Order 14110, which emphasizes safe, secure, and trustworthy AI development, and Executive Order 14091, focusing on racial equity and support for underserved communities. Key provisions of these orders are outlined, including safe AI development, secure AI implementation, trustworthy AI use, and commitments to racial equity. The article also highlights steps that should guide documenting case studies that align with successful AI projects, showcasing compliance with Executive Orders and positive impacts on communities and organizations. The future outlook focuses on anticipating regulatory changes, adapting to evolving ethical standards, and promoting a culture of continuous improvement within AI projects. The conclusion summarizes executive responsibilities, emphasizing the call to action for ethical and inclusive AI leadership, contributing to the positive evolution of AI technologies for societal well-being.

The construction enterprise is a essential zone that contributes considerably to the worldwide financial system. but it faces numerous challenges, together with inefficiency in electric and electronics engineering tasks. This inefficiency results in delays, expanded charges, and decreased productivity. Device learning strategies have the capacity to deal with those challenges through optimizing the making plans and execution of electrical and electronics engineering tasks within the construction industry. This study paper targets to discover using machines gaining knowledge of strategies to maximise efficiency in electrical and electronics engineering projects inside the production industry. Mainly, the paper will be conscious of developing and imposing gadget mastering algorithms to optimize project scheduling, fabric procurement, and system utilization. The paper will even look at the ability of using predictive analytics to identify and mitigate dangers related to electric and electronics engineering tasks. The study could be based on a combination of literature review and empirical analysis. The literature evaluation will provide a top-level view of the demanding situations going through the development industry and the capability advantages of the usage of system getting to know strategies to deal with those challenges. The empirical evaluation will involve the improvement and testing of device mastering models on real-world information from electrical and electronics engineering initiatives inside the construction industry. The predicted results of this research are the development of a fixed of sensible recommendations for the use of machine gaining knowledge of strategies to optimize electric and electronics engineering projects within the construction industry. These suggestions will be beneficial for venture managers, engineers, and other stakeholders within the creation enterprise who're inquisitive about maximizing performance and decreasing charges of their tasks. Ordinary, this studies paper aims to contribute to the continued efforts to enhance the efficiency and productiveness of the development enterprise via exploring the ability of system studying techniques to optimize electrical and electronics engineering tasks.

Abstract: Interface risks are inherent in every construction project from start to finish. Identifying and managing these risks effectively in every project phase is crucial for actualising project objectives. This paper shows a comprehensive framework showing several relationships between project stakeholders and how the interface risks between them that influence project execution are identified and managed for the overall construction project success. Firstly, literature review on interfaces and interface risks were car-ried out and how organisations managed interface risks were discussed and secondly, the collection of quantitative data was conducted by means of structured online questionnaires. The sample consisted of 205 construction project professionals who were selected randomly. This group included individuals with various roles in the construction industry, The data was analysed using descriptive statistical methods, including factor analysis, reliability assessment, and calculations of frequencies and percentages. Finally, the results showed all the factors, work culture and organisational approaches that influence interface risk management and ways to identify and manage interface risks effectively.

The global coronavirus (COVID-19) pandemic has created a whole new set of risks in construction industries generating unprecedented delays, disruptions, and uncertainty on construction projects, and has forced the industries in adopting more sophisticated technologies while combating the reduced workforce on job sites. Further, the post-pandemic era of construction is expected to be a lot different as the industries will embrace the technology as the augmentation and collaboration strategy. Thus, it will be extremely hard to sustain for construction industries in the absence of effective risk management. The existing risk plans need to be inspected for their capability of handling new risks arising from COVID-19 and the project managers will need to make the necessary revisions as needed. This paper discusses on past (NORM), present (NEW NORM), and future (Post COVID-19 NORM) of the construction industry and highlights key strategies for managing projects and construction risks during and post COVID-19 pandemic.

The Saudi Vision 2030 is critical to boosting national development, notably in the construction industry. The construction industry is getting a lot of attention in a variety of ways, the most visible of which is the promotion of best practices, including project management office (PMO) applications. Hail province, like others, is experiencing project delivery issues. Thus, the purpose of this research is to explore the suitable PMO model for Hail public construction projects. A literature review included the drive factors for establishing PMO in construction firms, as well as PMO models and typologies that describe functions. Therefore, those drive factors and PMO models were subjected to a focus group to explore their suitability in the context of Hail. The research findings reveal that the Enterprise PMO is the main for Hail public construction pro-jects, followed respectively by the Program Management Office model and the Project Management Center of Excellence (PMCOE). This method of selection a PMO model is driving construction companies and related businesses to change in order to improve the sector while also ad-dressing construction project delivery challenges in Hail province.

Participation by local communities in wildlife conservation projects have long been advocated since it is socially just and is effective to reach conservation and development goals. Socio–economic variables that drive participation and impact of participation have been studied, but the contextual process that stir up local community participation remains understudied. In this paper, we studied factors facilitating community participation in three wildlife conservation projects in Northeast India. Through ethnographic fieldwork at these sites we identified conservation actors and examined interactions between them.We found common modes of participation at these sites and these were related to gaining material incentives, providing labour, attending consultative workshops. Levels of interaction and coercion were found to be different in three sites. Three critical factors that drive participation were: (1) trigger, (2) negotiation and (3) sustenance. Trigger factors kickstart participation through establishment of a crisis narrative and facilitation by external actors. Negotiation factors emerge from day–to–day interaction between local community and external actors and involve effective entry stage activities, income opportunity, mediating voices within the community and intra–community dynamics. Sustenance factors affect the long term participation by community in the conservation project and involve tangible/intangible results, capability development of locals, funding and availability to critical information. In our paper we argue that investment of time and fund to understand the stakeholders and their concept of participation, periodic feedback sessions, capacity development of locals for self–mobilization, innovative information dissemination and securing long term funding are necessary for effective local community participation.

This study introduces an integrated method for managing process risks in a Business Process Reengineering (BPR) project, using Robust Data Envelopment Analysis (RDEA) and machine learning (ML). The goal is to prioritize risks based on three standard factors of PFMEA: Severity, Occurrence, and Detection (S-O-D), and incorporating two additional factors (Breakdown Cost and Breakdown Duration) seen as undesirable outputs. The model also accounts for the effect of uncertainty on expert-estimated values by applying disturbance percentages in the linear PFMEA-RDEA model. A machine learning model is proposed to predict new values if partial or total modifications have been made to the processes. The approach was implemented in an au-tomotive sector company, and the results showed the impact of uncertainty on values by com-paring different approaches such as RPN, PFMEA-DEA, and PFMEA-RDEA. A new reduced risk categorization was achieved, who allowed for decision-makers to focus on necessary actions for reengineering.

Integration of 5D Building Information Modelling (BIM) into large rail projects has the potential to significantly enhance cost management and control. Nevertheless, 5D-BIM implementation has encountered difficulties stemming from technical, functional, and governance-related factors. This paper builds a conceptual framework to support financial decision-making, enhances project management, and promotes efficient project delivery. The framework encompasses a set of interrelated elements that include project governance, BIM policies and standards, digital platforms, BIM LOD, cost estimation classification, and continuous improvement. The proposed framework acknowledges the significance of project governance in guiding and organizing the implementation of 5D-BIM. Additionally, BIM policies and standards ensure the adherence to quality standards for the produced BIM models. Digital platforms serve as the basis for multiple users to generate, access, share, and exchange project information. BIM LOD promotes collaboration and coordination among all project stakeholders. Cost estimation classification aligns the estimation process with the development of project scope and financial decision-making. Continuous improvement plays a vital role in optimizing processes, enhancing efficiency, and achieving higher-quality outcomes. Moreover, it fosters stakeholder satisfaction, improves project performance, and nurtures a conducive environment for innovation and learning. The study analyses the framework utilization in the Victorian rail projects and identifies key implementation challenges. This can be summed up as follows: The main technical hurdles were the lack of current horizontal infrastructure standards for data exchange and the lack of compatibility with current cost management standards. Increased project complexity and the absence of clear project governance strategies and processes posed organizational challenges. A further validation of the framework in real-world rail projects was recommended to achieve the implementation goals.

The role stakeholders play is fundamental to the realisation of sustainable development. Con-sequentially, there is need for the major stakeholders to be fully aware of their respective roles. Thus, this paper focused on assessing the Stakeholders roles in sustainable housing projects in Lagos State, Nigeria. Structured questionnaire survey was used to collect data from 259 stake-holders involved in sustainable housing projects in Lagos State, Nigeria. A total of 203 responses were obtained, representing 78% response rate. Primary data regarding the extent of stakeholders awareness of their roles in sustainable housing were collected. The data collected were analysed using mean ranking analysis and analysis of variance (ANOVA). The data collected were used to determine the extent of awareness of the stakeholders’ role in sustainable housing pro-jects in Lagos State, Nigeria. The results showed that all the stakeholders were aware of their respective roles in the delivery of sustainable housing projects and were highly conscious of them. Although their extent of awareness was at varying levels, there was no statistically significant difference of opinions amongst the different categories of stakeholders in the delivery of sustainable housing projects. The study concluded that Government and Project Managers have key roles to play as major stakeholders in the delivery of sustainable housing projects. The knowledge of the awareness of stakeholders’ roles in the delivery of sustainable housing project provides invaluable information to stakeholders regarding the important roles to focus attention on in achieving sustainable housing projects. The study provides a veritable basis for assessment of sustainable housing project in Lagos State, Nigeria.

The challenge of accessing finance by entrepreneurs from traditional financial sources is pervasive. The COVID-19 pandemic further exacerbated the problem of limited access to finance from banks. Against this backdrop, the objective of the study was to determine the factors driving crowdfunding success during the COVID-19 pandemic in Africa. The ordinary least squares (OLS) and probit regression models were estimated to analyse 216 crowdfunding projects in Africa. The results of the study documented that targeted amount (TA), and COVID-19 pandemic were negative and significant drivers of crowdfunding success. Furthermore, comments (CMM) and duration (DRN) were negative and significantly affected crowdfunding success. Conversely, images (IM), videos (VD), backers (BCK), and updates (UPD) were positive and significantly affected crowdfunding success. The study contributes to the body knowledge by investigating the drivers of crowdfunding success during the COVID-19 pandemic period which hitherto had not been researched on extenisvely.

Alkali-silica reactivity (ASR) is one of multiple reactions responsible for premature loss in concrete infrastructure service life. ASR is a deleterious reaction initiated when highly reactive silicious content of aggregates reacts with alkali hydroxides content within portland cement in the presence of moisture. ASR results in the formation of expansive, white-colored gel-like material which results in internal stresses within hardened concrete. ASR induced stresses result in concrete cracking, spalling, and increased reinforcement steel corrosion rates. The main objective of this research is to improve the conditions of concrete infrastructure projects conditions by mitigating ASR damaging effect. The expansion of accelerated mortar bars poured using fine aggregates collected from different sources is measured versus time to evaluate aggregate’s reactivity. Different percentages of supplementary cementitious materials (SCMs) including class c fly ash, micro-silica, were used in remixing mortar bars to evaluate the efficiency of different types of SCMs in mitigating mortar bar expansion. Research findings showed that SCMs can mitigate ASR, thus, decrease the mortar bar expansion. The efficiency of SCMs in ASR mitigation is highly dependent on the incorporated SCM percentage and particle fineness. Silica fume, having the least particle size, displayed higher rates of ASR mitigation followed by fly ash, respectively. The outcomes of this research will assist design engineers in avoiding future losses due to ASR cracking in concrete infrastructure projects, and reduce the excessive need to maintenance, repair, and replacement activities.

Design changes seem inevitable in engineering, procurement and construction EPC projects. Such changes create a need for a proactive approach to adjusting project scope, cost and time (the triple constraints) for efficiency and effectiveness in overall delivery. This study investigates the causes and implications of design changes in order to improve design change management practices. Data for the study was obtained through online interviews with New Zealand industry practitioners. Thematic analysis was used to collate the results into meaningful data. The study found that design changes were predominantly caused by clients' inadequate strategic planning, insufficient attention to design, EPC contractors' inadequate design ability, and on-site variations. There were three categories of such design changes: direct impact on the project, the reciprocal and complementary effect on stakeholders, and the far-reaching impact on the community. The study concludes by suggesting improvements, such as strengthening the integration of project teams to enhance design quality, strategic alignment of stakeholders at the planning stage, early contractor involvement (ECI) between the planning and design phases, and improving collaboration between design and construction teams. Further, a combination of high technical skills (e.g. design ability) and soft skills (can-do attitude, interpersonal skills, problem-solving skills, documentation skills, etc.) are needed to effect the desired improvement in design change management.

Objectives: Data sharing has become a requirement of many funding bodies and is becoming a scientific standard in many disciplines. In medical research, however, data sharing can conflict with clinicians’ obligation to protect patients’ privacy. General recommendations on data sharing exist also for clinical research, but so far lack practical and Swiss-specific aspects. The objective of this document is to provide practical recommendations for all relevant aspects of data sharing in agreement with legislation in Switzerland. Methods: This document was written by members of the Swiss CTU Network, a network of academic clinical trial units. The process did not follow a formalized Delphi process. After an internal consensus round, this report is now published as pre-print for external review. A second version will incorporate external comments. We plan to publish this document as a text in progress, as we expect relevant changes in related fields such as the development of further dedicated medical repositories or methodological advances in anonymization techniques. Results: We developed principles and practical recommendations with respect to informed consent, data management plan, anonymization, data structure and format, coding of variables, metadata and documentation, version control, selection of repository, requesting and use of data. We also provide a summary of legal aspects relevant for the Swiss context. Conclusions: The intension to share data has an impact not only after a clinical trial or an observational study is completed, but also during the planning period, the conduct and the analysis phase. Clinical researchers need to be aware at the beginning of a study on how to inform patients and at least the amount of work related to preparing data for sharing, metadata, and any further documentation. This report provides details of aspects to be considered, suggests decision criteria, and provides examples and checklists, in order to support data sharing in practice.

This study aims to open a discussion on the concept “cultural sustainability” in architectural design. We asked the question if spatial planning has a role in cultural sustainability and in which terms cultural sustainability could be considered or discussed in design process. We started with a presupposition of an example which achieved cultural sustainability in time. We exemplified a holiday resort village designed in 1970 and is still in use with inconsiderable transformations. As being a social engineering was a necessity for the architects, Altuğ and Behruz Çinici [1], it can be said that their design approach was to achieve a sustainable living considering the financial, ecological, environmental and cultural dimensions. Behruz Çinici and his wife Altuğ Çinici are influential and proclaimed architects of their time. For understanding Çinici’s design concepts, we first looked at his inspiration sources as he verbalized in his conferences. After studying on their village projects, we suggested four spatial concepts for reading the projects from the perspective of cultural sustainability. We analyzed their three resort villages designed in the same decade through the criteria we have suggested. In evaluation; the distinguished features of Çinici’s resort projects are discussed in relation with the concept cultural sustainability. In conclusion, we intended to open a discussion for the criteria we proposed for cultural sustainability in spatial planning and put the importance of cultural practices for housing policies for regional identity in global world.

The governance of public sector infrastructure projects became an important topic of interest in the project, programme and portfolio management literature during the last decade. Today, it is becoming a central focus for policymakers seeking to ensure success in selecting, designing and implementing government-sponsored programme of multi-projects. Due to the multiple underlying risks and complexities, the governance of infrastructure programme constitutes a critical element in strategic planning in developing countries. This paper has analyzed infrastructure development programme and revealed shortcomings in the areas of appraisal, decision-making, quality assurance and stakeholder management. Approaches to remedy these shortcomings have been proposed.

Recently, there has been a growing interest in the production of electricity from renewable energy sources (RES). The RES investment is characterized by uncertainty, which is long-term, costly, depend on feed-in-tariff and support schemes. In this paper, we address the real option valuation (ROV) of a solar power plant investment. The real option framework is investigated. This framework considers the renewable certificate price, furthermore the cost of delay between establishing and operating the solar power plant. The optimal time of launching the project and assess the value of deferred option are discussed. The new three stage numerical methods are constructed, the Lobatto3C-Milstein (L3CM) methods. The numerical methods are integrated with concept of Black-Scholes option pricing theory, and applied in option valuation for solar energy investment with uncertainty. The numerical results of L3CM, finite difference and Monte Carlo methods are compared to show the efficiency of our methods. Our data set refers to the Arab Republic of Egypt.

In the realm of construction industry, the management of claims constitutes a pervasive and multifaceted issue, with potential repercussions extending to project delays, cost overruns, work suspensions, and, in extreme cases, project termination. This challenge is a significant and unavoidable hurdle due to the unique features of construction projects, which are complex, involve many stakeholders and come with inherent risks. To address this complex issue, it becomes imperative to undertake a comprehensive appraisal of the claims management procedures employed within the industry, culminating in the presentation of findings within a risk-based framework. The overarching objective of this endeavour is threefold: firstly, to discern the pivotal attributes that affect each category of construction claims; secondly, to establish a coherent decision-making paradigm for the effective administration of such claims; and finally, to provide data that can be harnessed to either address concerns related to claims or enhance the effectiveness of the claims administration process. Keeping this in mind, this study serves to evaluate the factors associated with claim management gathered from a wide overview of literature, encompassing a range of construction projects, varying in terms of types, sizes/capacities and contractual arrangements. Hence, it advanced a refined method within the domain of fuzzy group decision-making, denoted as the Modified Fuzzy Group Decision-Making Approach (FGDMA) in addition to extensive statistical analysis using SPSS.V.25 software. They were applied to assess, analyze and prioritize claim about 108 claim management factors based on the responses obtained from the comprehensive questionnaire survey involving 104 industry professionals. This multi-faceted approach, which combines the insights from previous publications, along with the collective experience of the surveyed professionals with the analytical capabilities of the FGDMA- Statically Factor Analysis, reinforces the robustness and practical applicability of proposed methodology within the context of construction claims management.

The optimal structural design is imperative to minimize material consumption and reduce the environmental impact of construction. Given the complexity in the formulation of structural design problems, the process of optimization is commonly performed using artificial intelligence (AI) global optimization, such as Genetic Algorithm (GA). However, the integration of AI-based optimization together with visual programming (VP) in building information modeling (BIM) projects warrants further investigation. This study proposes a workflow by combining structure analysis, VP, BIM, and GA to optimize trusses. The methodology encompasses several steps including: (i) generation of parametric trusses in Dynamo VP; (ii) performing the finite element modeling (FEM) using Robot Structural Analysis (RSA); (iii) retrieving and evaluating the FEM results interchangeably between Dynamo and RSA; (iv) finding the best solution using GA; and (v) importing the optimized model into Revit, enabling the user to perform simulations and engineering analysis, such as life cycle assessment (LCA) and quantity surveying. The feasibility of the proposed workflow was tested on benchmark problems and compared with open literature. The outcomes of this study offer insight into the opportunities and limitations of combining VP, GA, FEA, and BIM for structural optimization applications, particularly to enhance structural efficiency and sustainability in construction.

To solve the benefit allocation problem between the subjects of the supply chain of general contracting projects. The Cobb-Douglas function is applied to establish the benefit distribution model when the two cooperate in the supply chain system, analyze the optimal benefit situation of one-time cooperation between the two parties under two modes of egoistic decision and collectivistic decision as well as the benefit distribution problem of multiple cooperation, and conduct numerical simulation to calculate the functional relationship between each decision variable and the contribution degree of the general contractor under different effort cost coefficients. The results show that：In the case of one-time cooperation between general contractors and subcontractors, regardless of the decision mode, the degree of effort of both parties is positively related to their own contributions and negatively related to each other's contributions; the overall benefit of the supply chain system is positively proportional to the degree of contribution of the general contractor and inversely proportional to the share of benefit distribution of the subcontractor; in multiple cooperation, the equilibrium result of both parties achieving Pareto optimality at each stage is that both parties choose to cooperate.

Software engineers from all over the world solve independently a lot of similar problems. In this condition the problem of code or even better architecture reusing becomes an issue of the day. In this paper two phase approach to determining the functional and structural likenesses of software projects is proposed. This approach combines two methods of artificial intelligence: natural language processing techniques with a novel method for comparing software projects based on ontological representation of their architecture automatically obtained from the projects source code. Additionally several similarity metrics are proposed to estimate similarity between projects.

Facility Management (FM) has increasingly focused on using Building Information Modeling (BIM) in large-scale development projects. To successfully integrate BIM in the FM sector, cooperation among different participants involved in various project stages must be improved. The objective of this digital revolution in FM is to enhance the efficacy of planning, constructing, and managing assets, benefiting all parties involved. However, the utilization of BIM in FM is limited due to factors such as incomplete owner understanding, insufficient data accessibility, and stakeholders' unfamiliarity with BIM procedures and standardization. Although the FM industry acknowledges BIM's significance, achieving successful implementation remains challenging. Facility managers lack a clear understanding of BIM's benefits in expediting operations and cost efficiency and the necessary skills for efficient utilization. To address this constraint, it is essential to develop an Employee’s Information Requirement (EIR) at the outset of a project, serving as a strategic plan and providing a comprehensive vision for all parties involved, particularly large-scale projects. Two essential technologies that facilitate the transition towards building operations are BIM and the Internet of Things (IoT). Incorporating these technologies is crucial to reducing time, expenses, and operational challenges throughout any project. The aim of this research is to create a Digital-Trio workflow, as a new expression, by providing a methodology for using facility management with BIM through the integration of EIR and IoT, maximizes the benefit of stakeholders strategically and operationally. It also explores how the preparation of the EIR by communicating with all parties will definitely improve the design process, sustainability, efficiency, cost, and time for any project, especially megaprojects.

In recent years, machine learning (ML) techniques have emerged as an efficient and effective technology within the petroleum industry. This paper focuses on the current application of ML in enhanced oil recovery (EOR) through CO2 injection, which exhibits promising economic and environmental benefits of climate-change mitigation strategy. Our comprehensive review explores the diverse use cases of ML techniques in CO2-EOR, including aspects such as minimum miscible pressure (MMP) prediction, well location optimization, oil production and recovery factor prediction, multi-objective optimization, Pressure-Volume-Temperature (PVT) properties estimation, Water Alternating Gas (WAG) analysis, and CO2-foam EOR, from 101 reviewed papers. In this comprehensive review, we catalog relative information, including the input parameters, objectives, data sources, train/test/validate information, results, evaluation, and rating score for each area based on criteria such as data quality, ML building process, and analysis of results. We also briefly summarized the benefits and limitations of ML methods in petroleum industry applications. Our detailed and extensive study could serve as an invaluable reference for employing ML techniques in the petroleum industry. Based on the review, we found that ML techniques offer great potential in solving problems in the majority of CO2-EOR areas involving prediction and regression. With the generation of massive amounts of data in the everyday oil and gas industry, machine learning techniques can provide efficient and reliable preliminary results for the industry.

Rooftop solar (RTS) projects have the potential to contribute to climate change mitigation and sustainable development objectives. In India, grid-connected RTS capacity has been targeted at 40 GW by the end of the year 2022 however, the installed capacity is limited to 8.2 GW only. As a result, the country missed its 2022 target of installing 100 GW of solar power capacity, largely due to inadequate uptake of RTS. The prevailing practices of RTS implementation is observed to be complex, repetitive, tedious, and time-consuming for potential consumers and there is a lack of coordination among implementing agencies. Therefore, even with vast potential, supportive measures, dedicated policies, and regulations the penetration of RTS systems is far below their respective potential. The introduction of information technology (IT) intervention in the RTS sector would integrate key stakeholders at a single platform so as to reduce the administrative burden of implementing agencies, optimization of processing time, handle multiple consumers simultaneously, and connect consumers with authentic vendors, etc. This would help them to understand and perform their shared roles and responsibilities and enhance the RTS implementation across the state. In this study, the scope for IT interventions in the existing RTS implementation process of the Odisha Renewable Energy Development Agency (OREDA) has been assessed and a simplistic approach has been developed for the execution of the RTS projects in relatively lesser time with the least human interface as well as resources. This approach has been successfully demonstrated with OREDA and a cumulative capacity of around 5 MWp (individual project of 1-2 kWp) residential grid-connected RTS projects implemented through the web platform. Currently, other state nodal agencies are also adopting the model for RTS execution and consumer proliferation through IT interventions.

The importance of this study may be defined by using the smart techniques to earned value indicators of residential buildings projects in Republic of Iraq, only one development intelligent forecasting model was presented to predict Schedule Performance Index (SPI), Cost Performance Index (CPI), and To Complete Cost Performance Indicator (TCPI) are defined as the dependent. The approach is principally influenced by the determining numerous factors which effect on the earned value management, that involves Iraqi historical data. In addition, six independent variables (F1: BAC, Budget at Completion., F2: AC, Actual Cost., F3, A%, Actual Percentage., F4: EV, Earned Value. F5: P%, Planning Percentage., and F6: PV, Planning Value) were arbitrarily designated and satisfactorily described for per construction project. It was found that ANN has the capability to envisage the dust storm with a great accuracy. The correlation coefficient (R) has been 90.00%, and typical accuracy percentage has been 89.00%.

Despite knowledge concerning stakeholders and the economic advantages of consultation, collaboration and innovation, analysis of the sustainability implications of the geothermal industry has tended to take a high-level or systemic overview of national performance. This study seeks to begin to fill this gap in the academic and grey literature, investigating the following research question: how do projects in the Icelandic geothermal energy sector create co-benefits with stakeholders and reflect the integration of sustainable energy development (SED)? The focus of its analysis is on identifying who are the stakeholders, what are the sustainability benefits co-created with stakeholders, and when in the project lifecycle do these occur. Based on eleven semi-structured interviews with project managers in Iceland’s geothermal industry, the study identifies a broad array of stakeholders in the sector, including national and municipal governments and public sector institutions, businesses, the public, employees and landowners. The sustainability co-benefits of Iceland’s geothermal power projects are broad and cut cross all six themes of SED and multiple phases of the project lifecycle. Although the sustainability benefits are very apparent, trade-offs are reported between the pursuit of an economically efficient energy system and nature conservation. This relates to unsustainable utilization of the resources and the environmental externalities of power production and consumption. Efforts to mitigate these effects are ongoing and the further pursuit of SED is likely in Iceland given its recognition within the nation’s new energy policy and to meet ambitious greenhouse gas emissions reduction targets in the government’s climate action plan. These are issues that are prominent in other nations seeking to decarbonize energy systems through increased utilization of geothermal resources.

The impact of the climate crisis on urban environments and life within them is evident. In the face of challenges like heatwaves, floodings and other extreme events, pollution, and declining quality of life in cities, there is a growing demand for the preservation and expansion of urban green spaces, often driven by citizen-led transformations. This paper examines 100 urban greening projects initiated or supported by citizens globally, categorizing them according to the type of greenery, the stakeholders involved, the mode of implementation and the use of smart technologies incorporated. We notice variations in green endeavors based on the stakeholders spearheading them, however most of entirely citizen-led initiatives aimed at the creation of urban farms and food growing, demonstrating the pressuring needs for food securing and self-determination in communities. More than half of the assessed initiatives that managed to scale up and multiply had public authorities providing a framework or a type of support for their development or an NGO or other organization providing expertise and mobilize citizens at various stages. In terms of technological use, we find mostly websites and social media platforms easing participatory endeavors and knowledge sharing of best practices, accelerating scaling efforts, while there is a low integration of more advanced digital technologies, which if used, could enable real-time monitoring of green spaces, inform evidence-based decision-making, and streamline processes in scaling up green initiatives.

The construction sector is considered as a major consumer of virgin materials and contributor to waste generation. Therefore, it is essential to rethink current waste management practices, for example, by applying circular economy principles to building demolition, such as deconstruction. Deconstruction involves dismantling a building with the aim of maintaining the highest possible value for its materials and maximize their recovery potential. This study aims to guide the construction sector towards deconstruction to support its efforts to transform itself toward a more sustainable industry. It focuses on a regional case study in the province of Québec (Canada) presenting five buildings to be deconstructed. First, the study presents the outcomes of our analysis of the current situation. Second, it identifies the issues and obstacles encountered and proposes avenues to improve the current process based on solutions identified in the literature and the recommendations of the manager, the contractor involved in the deconstruction process, as well as experts in the construction industry. Finally, it proposes an improved deconstruction process. Our research approach is inspired from Lean thinking and follows Action Research methodology.

The issue of sustainability has long been the subject of interest of the architecture engineering and construction sector. All three aspects of sustainability - economic, environmental and social - can be affected through appropriate construction waste management. Construction and demolition waste (CDW) is one of the largest worldwide waste streams, therefore it is given great attention by all stakeholders (investors, contractors, authorities, etc.). Researches have shown that one of the main barriers to insufficiency CDW recovery is inadequate policies and legal frameworks to manage CDW. It is also one of the EU's environmental priorities. Aim of the article is to confirm the economic potential of construction and demolition waste audit processing through case study. A pre-demolition waste audit has been processed for unused building of shopping center in the town Snina in Slovakia. Subsequently, a comparison of economic parameters (waste disposal costs and transport costs) of recommended CDW management was performed. This comparison confirmed the economic benefits of environmentally friendly construction waste management methods according to the waste audit results, which will also increase the sustainability of construction projects. In addition, the cost parameters of selected waste disposal methods could be another dimension of building information modelling.

According to the growing concern of various focus groups, in regard to the mitigation of the negative impacts generated because of the tourism, has born the interest of proposing sustainable tourism projects derivatives of the feeling within the communities (1) Background: the aim is to propose a differentiated diagnosis of the Subsystems (biophysical and anthropic) and their relationship with traditional-rational knowledge; (2) Methods: from the Theory of Complex Systems was propose the Harmonic Tourism Methodology, that try to correlation the subsystem and knowledge in the community of San Juan Tlahuica Atzingo, State of Mexico (4) Conclusions: Among the most outstanding results that are on the one hand, we must work through tourism projects to the rescue and preservation of natural and cultural resources, reassessing them through the strengthening of social cohesion. On the other hand, the application of this case allowed us to visualize that it is necessary to consolidate the elements and steps of the methodology in order to apply it to different communities that are beginning their journey in the field of the tourism and that can improve and potentiate their resources, seeking harmony between them.

With a low rate of new building construction and insufficient rate of existing building renovation, there is the need for stepping up the pace of building renovation with ambitious performance targets to achieve EU climate change policies. However, effective technologies alone cannot solve the low renovation rate of existing buildings in Europe that is hindering the reaching of EU-wide targets. A workshop was held at the Sustainable Place Conference 2018 to present successful experiences with an integrative approach from H2020 innovation actions (4RinEU, P2ENDURE, Pro-GET-OnE, MORE-CONNECT) aiming at improving building energy performance through deep renovation. This article presents the outcomes of the joint workshop and interactive discussion, by focusing on the different technical, financial and social added values, barriers and challenges in building renovation as well as on the identification of open questions to address future innovation opportunities.

This paper proposes a heuristic approach for managing complex construction projects. The tool incorporates with Primavera P6 EPPM and Synchro 4D, enabling proactively clash detection and resolution of spatial conflicts during concurrent tasks. Additionally, it performs resource verification for sufficient allocation before task initiation. This integrated approach facilitates the generation of conflict-free and feasible construction schedules. By adhering to project constraints and seamlessly integrating with existing industry tools, the proposed solution offers a comprehensive and robust approach for construction project management. This constitutes to our knowledge the first dynamic digital twin for the delivery of a complex project.

This systematic literature review explores the impact of social media use (SMU) and practices (SMPs) on team feedback (TF) and performance (TP) in construction project management. The study delves into the intricate dynamics between SMU and SMPs and their influence on communication, collaboration, and stakeholder engagement within construction projects. It investigates how these digital practices reshape the traditional methods of team interaction, feedback mechanisms, and overall team performance in the complex and multifaceted environment of construction sites. The review aims to provide a comprehensive understanding of the role of social media in modern construction project management, highlighting its significance in enhancing team communication, coordination, and performance. This research is crucial for understanding the evolving landscape of construction management, where digital tools and platforms are increasingly integral to successful project outcomes. The findings are expected to offer valuable insights for professionals in the construction industry, helping them leverage social media effectively for improved project management and team collaboration.

Chronic exposure of workers to powder containing crystalline silica (SiO₂) can lead to chronic lung diseases (lung cancer, silicosis, etc.). The aim of the study was to evaluate the exposure of Greek construction workers to SiO₂ and describe their pulmonary function. The study involved 86 outdoor and underground workers. Medical and professional history was obtained, and breath samples were collected at morning hours through a mask for the determination of SiO₂ levels. Pulmonary function tests, radiological examination and evaluation of radiographs were, also performed. During the examination of the pulmonary function, the majority of the workers were within normal range (61.4%) while the rest were diagnosed with mild (26.5%) and more severe impairment (7.2%). Working conditions (underground-outdoor) were statistically significantly related to the categorization of pulmonary function (p = 0.038). During radiological examination, the type of working conditions (underground-outdoor) were statistically significantly related to the categorization of these findings (p = 0.044). Of the 69 employees, 52 did not present findings (75.4%) and five (5) were diagnosed with findings specific to occupational diseases (7.2%). The environmental exposure to RCS (Respirable crystalline silica) was detected at 0,0125 mg/ m³ in the workplace, which is not beyond the legal limits. Underground workers with more than 15 years of exposure to SiO₂ are more likely to present chronic silicosis compared to the workers of outdoor activities.

Major marine construction projects, resulting in the release of sediments, are subject to environmental assessment and other regulatory approval processes. An important tool used for this is the development of specialized numerical methods for these marine activities. An integrated set of numerical methods addresses four distinct topics: the near-field release and mixing of suspended sediments into the water column (i.e. the initial dilution zone); the transport of the suspended sediments under the influence of complex ocean currents in the far-field; the settling of the transported suspended sediments onto the seabed; and the potential for resuspension of the deposited sediments due to sporadic occurrences of unusually large near-bottom currents. A review of projects subjected to environmental assessment in the coastal waters of British Columbia from the year 2006 to 2017, is presented to illustrate the numerical models being used and their ongoing development. Improvements include higher resolution model grids to better represent the near-field, the depiction of particle size dependent vertical settling rates and the computation of resuspension of initially deposited sediments, especially in relation to temporary subsea piles of sediments arising from trenching for marine pipelines. The ongoing challenges for this numerical modeling application area are also identified.

Public-private partnership (PPP) is a prominent tool for sustainable infrastructure development. However, the positive contributions of PPPs towards attainment of sustainable, climate resilience and zero carbon infrastructure projects are hampered by poor financial risk management. This problem is more prevalent in developing countries like Ghana where private investment inflow has plummeted due to COVID-19 recession and poor project performance. Thus, this study aims at assessing the key financial risk management strategies in ensuring sustainable PPP infrastructure projects in Ghana. The study utilised primary data from PPP practitioners in Ghana solicited through survey questionnaires. Factor analysis, mean scores and fuzzy synthetic analysis are the data analysis techniques for this study. The results revealed sustainable and green funding models, effective cost reduction initiatives, competent team with committed leadership, and emerging technologies and regulations constitute the key strategies to manage financial risks of sustainable PPP infrastructure projects. Although, future studies must expand the scope of data gathering, the findings of the study enrichen the theoretical understanding of financial risks in sustainable investments in PPP infrastructures. Relevant remedies that will aid the development of practical financial risk management guidelines are provided in this study for PPP practitioners.

The move to lean construction is a lengthy process that may call into question established ways of construction management delivery. The objective of this article is to help businesses take the first step on this route by introducing a few lean manufacturing techniques and practices that may be used on projects over the next few weeks. Although the construction industry has come a long way since its start, the essential technology to change it has not yet found a home. The digital switch has now entered the construction industry to boost production. Artificial intelligence (AI) is a discipline of computer science described as the potential of machines to mimic intelligent human behavior by modelling traditionally complicated problems using human-inspired techniques. Due to its complexity, AI distinguishes itself from lower degrees of digitalization. The complexity of artificial intelligence involves the formation of new circumstances for human collaboration and trust. This dissertation investigates the application of artificial intelligence and the suitable interaction between humans and AI-based technologies. This study attempts to shed light on how the construction industry may close the gap between the potential and actual benefits of artificial intelligence deployment. Comparing the prospective benefits of AI implementation to the present benefits and challenges of AI deployment in the construction industry revealed the disparity.

The beneficial effects of solar radiation on human health are well documented. One necessary mechanism triggers the production of vitamin D whose insufficiency has been linked to a variety of disorders like diabetes, hypertension and more recently amyloidosis and Alzheimer disease. However, there are few architectural designs capable on ensuring adequate provision of solar radiation inside buildings. Conventional fenestration is not sufficient to provide for significant doses of sunlight even to prevent seasonal affective disorder (SAD). In this paper we discuss the effect of new design alternatives for skylights, especially in the refurbishment of obsolete facilities. After such complex retrofit is executed, we have analyzed the performance of a building in warm and sunny climates as is the case of southern Spain. It has been considered as a priority the study of the factors that relate sunlight and energy, as well as, to a certain extent, other aspects like ventilation and insulation. Many architectural designs are presented as correct if the thermal requirements alone are met, even at the risk of later energy waste in lighting devices and visual or physical discomfort. On the other hand, large glazed areas allow more daylight into a space, but they may also allow excessive heat gains or losses which increase the air-conditioning cooling or heating load. To avoid these problems, we have considered the combined effect of daylight and energy from the beginning of the skylight design-process. A daylighting software based on configuration factors that we have apply in former researches to study the problems of direct sun over architectural structures have been used. This question cannot be treated adequately with conventional programs for overcast skies. The skylights have already been constructed and on-site measurements in the offices have been taken to complement the computer simulations data. The results show that it is possible to achieve energy saving and high radiation levels in winter without increasing heat loads during the summer. All this is considered beneficial to improve the condition of users with cognitive diseases as Alzheimer’s disease by virtue of adapted spaces.

We describe how clinical researchers can exploit the Android cell phone as an economic platform for the gathering of data from clinical trial participants. The aim was to provide a solution with the shortest possible learning curve for researchers who are comfortable with setting up web pages. The additional requirement is that they extend their skills to the installation of a local webserver on the cell phone and then use four simple PHP templates to construct the clinical research data collection and processing forms. Data so collected is automatically written to local csv files on the cell phone. These csv phones can be retrieved from the device by the researcher simply by plugging the cell phone into their desktop PC and accessing the cell phone memory in just the same way as they would a USB memory stick. The results are presented as a list of recommended Android Apps along with settings that have proved to provide a stable combination likely to be easily used by clinical research participants. We have made a limited ‘user trial’ of this approach with satisfactory feedback received. We have concluded that this approach will reward researchers with a solution that is user friendly, will provide transcription free data and that is more than cost competitive with the conventional error prone/poor compliance ‘paper based participant form – researcher transcription’ cycle.

This manuscript reviews two decades of projects funded by the Kirkhouse Trust (KT), a charity registered in the UK. KT was established to improve the productivity of legume crops important in African countries and in India. KT’s requirements for support are: 1) the research must be done by national scientists in their home institution, either a publicly funded agricultural research institute or a university; 2) the projects need to include a molecular biology component, which to date has mostly comprised the use of molecular markers for the selection of one or more target traits in a crop improvement programme; 3) the projects funded are included in consortia, to foster the creation of scientific communities and the sharing of knowledge and breeding resources. This account relates to the key achievements and challenges, reflects on the lessons learned and outlines future research priorities.

Among the leading immersive technologies, Augmented Reality is one of the most promising and empowering to support designers in production environments. This research investigates the application of mobile augmented reality, based on the Web, as a mediation tool focused on cognitive activities of reading and understanding of Technical Drawings in the production and assembly for Tailor Made projects of the scenographic industry. In this context, the research presents a method to use the WebAR to improve the reading of technical drawings, seeking efficiency on the visualization of models and the exchange of information between professionals, involved in the processes of design, production and assembly of products, in the scope of scenography. This mediation tool was developed using Web AR platforms, compatible with native libraries (ARCore and ARKit) to ensure, first, compatibility with commonly used devices that workers or businesses can access, and secondly, to leverage hybrid tracking techniques that combine vision and sensors to improve the reliability of augmented reality viewing. The proposed solution adopts multiple tracking and navigation techniques in order to expand Space Skills components to provide greater exploratory freedom to users. The research process took place in the light of the Design Science Research Methodology and the DSR-Model, since it aimed to develop a solution to a practical problem, as well as to produce knowledge from this process. Field experiments were conducted in two real companies, with end users on their respective mobile devices, in order to evaluate usability and behavioral intent, through the Acceptance, Intent and Use of Technology questionnaires; and perceived mental workload, NASA-TLX. The experimental results show that the adoption of this tool reduces the cognitive load in the process of reading technical drawings and project´s understanding. In general, it´s usability and intent to use provide significant levels of satisfaction, being positively accepted by all participants involved in the study.

Failure to meet the deadlines for the implementation of investment and construction projects is a problem in all countries of the world, and leads to unstable activity of construction companies. The article studies the most important destabilizing factors affecting the main indicator of sustainable activity of construction companies-the duration of the implementation of an investment and construction projects. To determine and assess the impact of destabilizing factors on the duration of implementation of selected investment and construction projects, a survey was conducted, in which a number of customers, consultants and contractors involved in construction projects took part. Questionnaires developed on the basis of a cluster sample were sent to respondents, 48 responses were received in response to the assessment of destabilizing factors. To analyze the received and grouped information, structural equation modeling using the Smart-PLS program was used. As a result of modeling, a number of results were obtained, the most important of which are the identification of the main reasons that lead to an average (20% - 50%) increase in the duration of projects in the construction sector. The most significant were: the lack of an appropriate procurement program for materials; inefficient scheduling by contractors and instability of construction production; poor-quality processing of incoming information and untimely deci-sion-making due to changes in projects during their implementation. Destabilizing factors con-tribute to an increase in the duration of construction sector projects, which leads to time overruns, cost overruns, and an increase in the negative impact on the overall use of resources. As a result of the study, a set of recommendations was formed, the most important of which is the use of possible compensatory measures that can allow construction companies to eliminate the risks of disrupting construction deadlines for sustainable activities. These compensatory measures include: - recommendations to customers of the construction project; - recommendations to contractors; - recommendations to the consultant. Moreover, the control of destabilizing factors that can cause delays, the improvement of contracts and the precise and clearer definition of all elements of the project can help to reduce the duration of construction, and will allow companies to maintain sustainable activities in the construction industry.

Sustainable development is inconceivable without healthy real estate market. A housing project can be regarded as sustainable only when all the dimensions of sustainability (environmental, economic, and social) are dealt with. There has been an increased interest in using sustainability indicators for evaluating the impacts of the new development projects. Past and recent experiences have shown that sustainability indicators can be useful tools for measuring the outcomes of new construction, when used appropriately and adequately. The aim of this article is to propose an integrated, hierarchically structured system of sustainability indicators to be used for assessment of the new housing development projects in the Baltic States. This aim is achieved through accomplishing three objectives. First, based on a review of literature related to assessing building project performance and sustainable development in construction, the paper proposes a hierarchically structured system of sustainability indicators. Second, based on a survey of experts from the Baltic States, significances of criteria are estimated by the Analytic Hierarchy Process (AHP) method. Finally, paper proposes recommendations to government authorities and real estate developers as to how to enhance the performance of new residential projects according to the principles of sustainability.

Accurate and stable cost forecasting of substation projects is of great significance to ensure the economic construction and sustainable operation of power engineering projects. In this paper, a forecasting model based on the improved least squares support vector machine (ILSSVM) optimized by wolf pack algorithm(WPA) is proposed to improve the accuracy and stability of the cost forecasting of substation projects. Firstly, the optimal features are selected through the data inconsistency rate (DIR), which helps reduce redundant input vectors. Secondly, the wolf pack algorithm is used to optimize the parameters of the improved least square support vector machine. Lastly, the cost forecasting method of WPA-DIR-ILSSVM is established. In this paper, 88 substation projects in different regions from 2015 to 2017 are chosen to conduct the training tests to verify the validity of the model. The results indicate that the new hybrid WPA-DIR-ILSSVM model presents better accuracy, robustness and generality in cost forecasting of substation projects.

Under the “Korean emission trading system in the forestry sector (KETSF)” initiative, the South Korean government has developed several greenhouse gas (GHG) emissions reduction programs that include forestry activities as the cornerstones of the initiative. Forest management is deemed to be a major strategy to implement KETSF; this has been confirmed by most participants in the program, who have shown their preference for forest management projects as the most effective and encouraging strategy to participate in the KETSF program. For a successful implementation of KETSF projects is essential to explore methods that optimize the positive impacts of such strategies, thereby maximizing the economic returns and carbon stocks that result from the implementation of forest management activities. Thus, this study investigated several value-added KETSF projects in South Korea, which included simulated scenarios under two main forest management strategies: one based on an extension of the rotation age, and a second one based on reforestation with new species. Five forest management scenarios were examined and evaluated in their ability to maximize carbon stocks and economic returns. Based on the results, Scenarios 2 and 4 were identified as the best KETSF projects in terms of carbon stock increments. Additionally, the results indicated that projects including reforestation with new species added more economic value than projects that considered an extension of the rotation age. The study also revealed that KETSF projects generated revenue in both scenarios, by either extending the rotation age or by implementing reforestation with new species.

Many pilot-based initiatives have been developed to promote awareness and use of climate information services among vulnerable smallholder farmers in Africa through million-dollar investments. However, despite their experimental nature, these pilot projects have been successful in raising participating farmers’ awareness and use of climate information services and they can inform transferrable good practices. Through a systematic literature review approach, this review sought to understand ways in which these past pilot projects have contributed to climate risk management in the context of smallholder farming and the factors that led to their success. Results showed that climate information services main contribution to climate risk management has been through facilitating farm level decision making. Factors that led to success of the pilots include: use of downscaled information; building institutional partnerships to add value to climate information; involving farmers through the co-designing and co-developing process; face-to-face way of communication; embedding pre-seasonal workshops in the activities of local institutions for sustainability; using diversity of communication channels to enhance reach among others. These factors can be borrowed as good practices to inform future efforts focused on increasing adoption of climate information services among a wider population beyond pilot project reach.

Citizen participation has always been of vital importance in decision-making processes and, likewise, joint work in the formulation and execution of projects that respond to territorial needs. This in order to ensure the best impact of public or private investment, optimizing the result and community articulation. For this reason, this investigation proposes a methodology of evaluation and prioritization of projects based on an approach integrated between the modelling in dynamics systems (SDM) and the Analytical process network (ANP), in which the citizen factors are used as qualitative and quantitative variables inside the posed balance sheet model. This is how the model developed by the Stella Architect software, it offers to the decision makers approximate information about the reality of the community, especially those who were affected by the Colombian conflict and where the expectations of a comprehensive repair could disrupt the socioeconomic system and reveal more pressing interests than those of the central government. The methodology is described by the information gotten through the participatory workshops done in the California county that belongs to the Magdalena region, this is a very affected region by the conflict in Colombia. The investigation results confirm the useful of, first of all, the use of the modelling as an information-generating tool by allowing the simulation of relevant variables in the evaluation and prioritization of projects at different moments of time and, in second place, use the knowledge of the experts that expose the ANP method for establishing the importance of each variable compared with other variables and, likewise of each project compared to the rest of the alternatives in each of the different instants of time in which the evaluation is carried out, given that the results could change in any time, the official ranking is showed after an optimization process with partial results.

As an important support for power system with high penetration of renewable energy, energy storage system (ESS) has changed the traditional model of simultaneous implementation of electricity production and consumption, and its installed capacity under the source-grid-load scenario is rising year by year, but it faces the problems of insufficient utilization and benefits. This study analyzes the functional combination of ESS under the source-grid-load scenarios, and proposes a comprehensive benefit evaluation method of energy storage projects based on fuzzy decision-making trial and evaluation laboratory (DEMATEL) and super efficiency data envelopment analysis (DEA) model, which considers the perspective of economic and social environment. Firstly, the functional requirements of energy storage on the source-grid-load scenarios are explored respectively, and the characteristics of various functions are analyzed to form functional combination schemes. Secondly, index modeling is carried out from three aspects: the whole life cycle cost, functional combination benefit and social environmental benefit, and the comprehensive benefit evaluation index system of energy storage project is proposed, which includes both economic and social environment. Then, the intuitionistic trapezoidal fuzzy number is combined with DEMATEL to form an effective analysis method for the input-output relationship of the indexes, and the comprehensive evaluation is realized based on the super efficiency DEA model. Finally, the effectiveness of the proposed evaluation method and the rationality of the functional combination are verified under source-grid-load scenarios respectively.

Objectives: This study aimed to analyze the awareness of local residents regarding healthcare projects and to suggest some ideas for the revision of local ones. Methods: To delve into the opinions of local residents, the author of this study created a questionnaire composed of eight questions on the general characteristics of the respondents, eight questions on satisfaction with health centers, 16 questions on the awareness of healthcare projects, and 22 questions on local healthcare. The survey was conducted for 409 residents who visited public centers in Gimcheon from 15 March to 14 April 2021. Results: Data analysis revealed the following: The proportion of local residents who use health centers was 39.1%, and those users visit health centers, on average, 3.92 times a year. Among healthcare projects, the project known by the highest proportion of people was vaccinations (84.5%), which was also the project that was most used (38.1%). Among healthcare projects needed in the with-COVID-19 age, respondents awarded the highest score to vaccinations (4.15 points on a five-point Likert scale) and the second highest score to infectious disease management (4.12). Conclusions: For healthcare projects, central and local governments should focus on activating vaccinations, solving the problem of medical accessibility through untact remote treatment and establishing national infectious disease-specializing hospitals and local infectious disease management based on such national hospitals.

A The guinea pig value chain in Jauja, Peru, has been developed through the application of productive projects, institutional strengthening and implementation of the principles of responsible investment in agriculture and food systems (CFS-RAI). The actors in this chain have been showing economic improvements, representativeness and participation, characteristics that make them the key human capital for development. To improve the performance of the actors in the sustainable rural development of the territory of Jauja, Peru, the research carried out an evaluation of the competencies and capacities for project management in 46 actors linked to the business programme on the CFS-RAI Principles, representing 1,094 people in the guinea pig value chain in Jauja, using the Working With People (WWP) model and empirical instruments based on the Octagon method, International Project Management Association (IPMA) competencies, performance evaluation carried out by experts, attitudinal evaluation and the Business Model Canvas. The results have helped to structure the actors of the value chain, who show an intermediate mastery of project management competencies (2.73/5), institutional capacities in development (2.89/7) and a growing organizational management performance (26.2/100). In addition, trust and proactivity have been generated among the actors in the chain, with an interest in continuing with the implementation of the CFS-RAI Principles in order to achieve sustainability in their productive projects with commercial innovation. The results have allowed us to generate the design of an innovative programme for the development of competencies, which balances the three dimensions of IPMA competencies (perspective, person and practice) in connection with the CFS-RAI Principles. Both processes complement the strengthening of human capital in agrifood value chains through sustainable project management and contributing to sustainable development in the region.

Developing countries, including Small Island Developing States (SIDS) and Least Developed Countries (LDCs), are exceptionally vulnerable to climate change due to their distinct geographical and environmental characteristics. The impacts of climate change extend across their ecosystems, water resources, and vital economic sectors, such as food systems, health, education, and energy. Escalating sea levels and heightened salinity levels imperil freshwater reserves, while warmer ocean temperatures and acidification disrupt water demand, tourism, health services, and fisheries. Furthermore, developing countries bear the brunt of water shortages, flooding, and deteriorating water quality. Alarmingly, nearly two-thirds of the global population experience severe water scarcity for at least one month annually, with the majority residing in developing countries. By 2025, half of the world's population could inhabit areas grappling with water scarcity, predominantly concentrated in developing nations. In this context, innovative adaptation strategies, notably transformative wastewater projects, are imperative for fostering sustainability and resilience in these regions. However, significant barriers impede progress, creating a stark disparity between current financing capabilities and the imperative to fund water security initiatives. Compounding these challenges, developing countries find themselves ensnared in a burgeoning debt crisis, marked by escalating interest rates and inflation, which threatens to impede developmental progress and curtail investments in adaptation and mitigation endeavors. Consequently, there arises a critical necessity to harness innovative financial mechanisms to transform these debts into assets that facilitate climate action. This paper meticulously explores the potential of debt-for-climate swaps as a catalyst for advancing transformative wastewater projects, with a focused lens on their strategic deployment to underpin critical initiatives. Through rigorous examination of case studies and empirical evidence, the paper elucidates how debt-for-climate swaps can effectively bolster sustainable wastewater management systems in developing countries. Furthermore, it delineates best practices for leveraging these mechanisms to fortify environmental sustainability and resilience. Additionally, the paper delineates the roles and responsibilities of key stakeholders, including governments, policymakers, the private sector, communities, and climate financial institutions. By amalgamating theoretical insights with tangible examples, this paper furnishes a comprehensive framework for harnessing debt-for-climate swaps to enhance water security and resilience in developing countries. It endeavors to furnish actionable strategies for policymakers, practitioners, and stakeholders to navigate the complex terrain of climate change and engender sustainable development.

Given the context of global climate change, a worldwide increase in land surface temperature (LST) is anticipated, leading to the exacerbation and broadening of its impacts. This could jeopardize the environmental conditions in countries with a predominantly hot and harsh climate, such as Bahrain, one of the Cooperation Countries (GCC) nations. Conversely, Bahrain is currently experiencing significant population growth, leading to a surge in demand for land to accommodate the construction of additional residential developments. This circumstance allows investigation of the potential impact of land use and land cover alterations on the variation in Land Surface Temperature (LST). In order to accomplish this objective, a residential development project was executed within the timeframe spanning from 2013 to 2023. Four sets of Landsat 8 OLI/TIRS remote sensing datasets were selected, with each set corresponding to one of the four climate seasons. Each set consisted of two images: one capturing the study area before the commencement of the development process and the other depicting the study area after the completion of the development. The study area was analyzed by extracting the land surface temperature (LST), normalized difference vegetation index (NDVI), and normalized difference built-up index (NDBI) on various dates. Subsequently, correlation and regression analysis were employed to examine the interrelationships among these three variables. The findings demonstrated a notable rise in the mean land surface temperature throughout the spring and autumn seasons following the conclusion of land development activities. The findings indicate a positive and robust association between LST and NDBI across all seasons. Moreover, this relationship strengthened following the completion of development activities in the area. Conversely, there was a negative correlation between LST and NDVI prior to the region's development, which transformed into a positive relationship post-development. These results provide empirical support for the notion that small-scale residential developments contribute to a notable increase in LST, primarily driven by the expansion of impervious surfaces in built-up areas. The findings can potentially contribute to the formulation of localized adaptation strategies for small-scale residential development projects.

Despite the shift to private sector-driven affordable housing in Nigeria for decades, the housing deficit has continued to increase to the disadvantage of low-income families. This paper explores the enabling strategies for stimulating private-driven affordable housing in Nigeria. A case study of the Millard Fuller Foundation projects was undertaken and semi structured interviews were administered to 12 residents of the estates and the developer to explore their experience and highlight the considerations for designing appropriate strategies. The data generated was analysed using thematic analysis with the support of Nvivo. The study identifies four major components of construction costs- land, design, materials, and finance that policy improvement can target to stimulate private investment. It shows that developers are likely to adopt practices that will reduce these costs with repercussions for end-users. Mindful of this, and the concern to make returns on investment, strategies should aim to harmonise both developers’ interest and that of the end-users through widespread infrastructural development to make land available in all locations, and incremental owner-building approach so that end users can take decisions for their housing. Furthermore, access to the National Housing Fund (NHF) mortgages should be enhanced by recognising supplementary incomes in the loan origination procedures

The Ames/quantitative structure-activity relationship (QSAR) International Challenge Projects held during 2014–2017 and 2020–2022, evaluated the performance of various predictive models. Despite the significant insights gained, the rules allowing participants to select prediction targets introduced ambiguity in model performance evaluation. This reanalysis identified the highest-performing prediction model, assuming a 100% coverage rate (COV) for all prediction target compounds and an estimated performance variation due to changes in COV. All models from both projects were evaluated using balance accuracy (BA), Matthews correlation coefficient (MCC), F1 Score (F1), and the first principal component (PC1). After normalizing the COV, a correlation analysis with these indicators was conducted, and the evaluation index for all prediction models in terms of the COV was estimated. In total, 109 models, the highest estimated BA (76.9) at 100% COV was MMI-VOTE1, reported by Meiji Pharmaceutical University (MPU). The best models for MCC, F1, and PC1 were all MMI-STK1, also reported by MPU. All models reported by MPU ranked in the top four. MMI-STK1 was estimated to have F1 scores of 59.2, 61.5, and 63.1 at COV levels of 90%, 60%, and 30%, respectively. These findings highlight the current state and potential of the Ames prediction technology.

The paper focuses on the application of a multilevel, integrative and territorial approach to the protection of cultural heritage through planning instruments in Serbia. It points out the problems of the sectoral approach and discusses international recommendations that can be integrated into the planning methodology. The case study is the area of Djerdap National Park, which has an already established international and national importance. The research suggests that the cultural heritage in the area, with the exception of the Roman limes, is still recognized at the level of individual localities. The study emphasizes the importance of aligning all levels of governance to safeguard the whole spatial entity rather than focusing solely on its particular areas. The interna-tional and national importance of the planning area contributes to the strengthening of awareness of heritage and its institutional protection. However, the vitality of the area, which is key to its sustainable development, comes from the local level. Planning documents contribute to the inte-gration of local values and local communities into development programs and projects.

Glycosidic linkage analysis was conducted on the unfractionated polysaccharides in the alcohol-insoluble residues (AIRs) prepared from six red seaweeds (Gracilariopsis sp., Prionitis sp., Mastocarpus papillatus, Callophyllis sp., Mazzaella splendens, and Palmaria palmata) using GC-MS/FID analysis of partially methylated alditol acetates (PMAAs). The cell walls of P. palmata primarily contained mixed-linkage xylans and small amounts of sulfated galactans and cellulose. In contrast, the unfractionated polysaccharides of the other five species were rich in galactans displaying diverse 3,6-anhydro-galactose and galactose linkages with varied sulfation patterns. Different levels of cellulose were also observed. This glycosidic linkage method offers advantages for cellulose analysis over traditional monosaccharide analysis that is known for underrepresenting glucose in crystalline cellulose. Relative linkage compositions calculated from GC-MS and GC-FID measurements showed that anhydro sugar linkages generated more response in the latter detection method. This improved linkage workflow presents a useful tool for studying polysaccharide structural variations across red seaweed species. Furthermore, for the first time, relative linkage compositions from GC-MS and GC-FID measurements, along with normalized FID and total ion current (TIC) chromatograms without peak assignments, were analyzed using principal component analysis (PCA) as a proof-of-concept demonstration of the technique's potential to differentiate various red seaweed species.

Background: Educating college students about the importance of good sleep habits could lead to the adoption of healthier sleep routines, including sufficient sleep duration and sleep quality. The current pre-post study examines the impact of completing a sleep education program called “Sleep 101” on (1) sleep hygiene practices, (2) sleep quality, and (3) weekday and weekend sleep behaviors among college students. “Sleep 101” is an interactive online course developed to educate college students about the importance of sleep by addressing basic sleep physiology, the impact of sleep on mood, academic and physical performance, the interactions between sleep and various substances, and common sleep disorders. Methods: 338 college students were recruited from a midsized public university in the US and invited to participate in “Sleep 101”, of which 25 participants completed the baseline and post-intervention questionnaire. The Sleep Hygiene Index (SHI) was utilized to evaluate sleep hygiene practices, while standard questions were employed to assess weekday and weekend sleep behaviors and overall sleep quality. Results: Those who completed the study demonstrated a significant increase in weekday sleep duration and were less likely to engage in negative prior bedtime activities. In addition, 40% of those who completed baseline and post-intervention assessments noticed improvements in their sleep quality. Conclusion: These findings suggest that a brief online program is beneficial in improving sleep behaviors among college and could be a scalable approach to addressing current sleep issues and preventing future sleep problems in college students.

The profile of secondary metabolites occurring in apple cuticular layer is not only characteristic for particular apple cultivar, but also dynamically reflects various external factors in growing environment. In this study, the possibility to authenticate apple samples based on analysis of their cuticular layer extracts was investigated. Ultra-high-performance liquid chromatography coupled to high resolution tandem mass spectrometry (UHPLC-HRMS/MS) was employed for obtaining metabolomic fingerprints. In total, 274 authentic apple samples, four cultivars harvested within the seasons 2020 to 2022 in the Czech Republic and Poland were analysed. The generated complex data processed by univariate and multivariate statistical methods enabled to build classification models for discrimination of apple cultivars as well as their geographical origin. The models showed very good performance in differentiation of Czech and Polish samples for three of four cultivars: ‘Gala’, ‘Golden Delicious’ and ‘Idared’, moreover, the validity of the models was verified over harvest seasons. The diagnostic markers, besides metabolites of triterpene biosynthetic pathway, mainly represented wax esters. ‘Jonagold’, which is known to be susceptible to mutations, was the only cultivar for which the unambiguous classification of geographical origin was not possible.

Strawberry root rot caused by Neopestalotiopsis clavispora is one of the main diseases of strawberry and significantly impacts the yield and quality of strawberry fruit. There are now no effective control techniques available except for fungicide sprays, which may directly impact consumers. Biological control is becoming an alternative method for the control of plant diseases to replace or decrease the application of traditional synthetic chemical fungicides. Trichoderma is widely used as a biological agent for controlling strawberry root rot. In order to provide resources for screening the highly effective biocontrol fungus for controlling strawberry root rot caused by Neopestalotiopsis clavispora, the biocontrol mechanism,the control effects of Trichoderma asperellum CMT10 against strawberry root rot and growth-promoting effects on strawberry seedlings were investigated by plate culture, microscopy observation and root drenching methods.The results showed that CMT10 had obvious competitive, antibiotic and hyperparasitism effects on Neopestalotiopsis clavispora CMGF3. The CMT10 could quickly occupy nutritional space, and the inhibition rates of CMT10 against CMGF3 in confrontation culture on 7 d was 65.49%. The inhibition rates of volatile metabolite and fermentation metabolite produced by CMT10 against CMGF3 were 79.67% and 69.84%, respectively. The mycelium of strain CMT10 can act as hyperparasites by making contacting, winding and penetrating hyphae of CMGF3. Pot experiment showed that the biocontrol efficacy of CMT10 on strawberry root rot caused by Neopestalotiopsis clavispora was 63.00%. CMT10 had obvious promotion effect on strawberry growth, the plant height, root length, total fresh weight, root fresh weight, stem fresh weight and root dry weight, with the promotion rates were 20.09%, 22.39%, 87.11%, 101.58%, 79.82% and 72.33%, respectively. Overall, this study showed the ability of Trichoderma asperellum CMT10 to control strawberry root rot and their potential to develop as novel biocontrol agents to replace chemical fungicides for eco-friendly, sustainable agriculture.

Apis mellifera, especially weak ones, are highly vulnerable to Carpoglyphus lactis mites, which can rapidly infest and consume stored pollen, leading to weakened colonies and potentially colony collapse. This study aimed to ascertain and investigate the prevalence of this mite in honeybee colonies across 9 provinces in the Republic of Korea (ROK). A total of 615 honeybee colonies were collected, from 66 apiaries during the spring and 58 apiaries during the summer of 2023. A 1,242 bp segment of the the Cytochrome c oxidase subunit 1 (COI) gene was amplified using the polymerase chain reaction method. The detection levels of C. lactis in the honeybees were compared between winter and summer. Based on the COI sequence analysis, the nucleotide sequence similarity of C. lactis mites isolated in the ROK with those from China (NC048990.1) was found to be 99.5%, and with those from the United Kingdom (KY922482.1) was 99.3%. This study is the first report of C. lactis in Korean apiaries. The findings in this study demonstrate a significantly higher detection rate in winter, which is 4.1 times greater than that in summer (p < 0.001). Furthermore, the results underscore the usefulness of molecular diagnostic techniques for detecting C. lactis mites.