Post-mortem cardiac magnetic resonance (PMCMR) is an emerging tool supporting forensic medicine for the identification of the causes of cardiac death, as hypertrophic cardiomyopathy (HCM). We proposed a new method of PMCMR to diagnose HCM despite myocardial rigor mortis. Methods: we performed CMR in 49 HCM patients, 30 non-HCM hypertrophy and 32 healthy controls. In cine images, rigor mortis was simulated by the analysis of the cardiac phase corresponding to the 25% of diastole. Left ventricular mass, mean and standard deviation (SD) of WT, maximal WT, minimal WT and their difference, were compared for the identification of HCM. These parameters were validated at PMCMR, evaluating 8 hearts with HCM, 10 with coronary artery disease and 10 with non-cardiac death. Results: The SD of WT with a cut-off of > 2.4 had the highest accuracy to identify HCM (AUC 0.95, 95%CI 0.89-0.98). This was particularly evident in female population of HCM (AUC=0.998), with 100% specificity (95%CI 85-100%) and 96% sensitivity (95%CI 79-99%). Using this parameter, at PMCMR all the 8 patients with HCM were correctly identified with no false positive. Conclusions: PMCMR allows to identify HCM as cause of sudden death using the SD of WT >2.4 as diagnostic parameter.

Parkinson's disease (PD) stands as the most prevalent degenerative movement disorder, characterized by the loss of dopaminergic neurons in the substantia nigra of the midbrain. In this study, we assessed the transcriptome by analyzing post-mortem mRNA extracted from the substantia nigra of individuals with PD and healthy controls. A total of 16,148 transcripts were identified, with 92 mRNAs displaying differential expression between PD and control groups. Specifically, 33 mRNAs were significantly upregulated, while 59 mRNAs were downregulated in PD compared to controls. The identification of statistically significant signaling pathways, with an adjusted p-value threshold of 0.05, unveiled noteworthy insights. Particularly, enriched categories included cardiac muscle contraction (involving genes such as ATPase Na+/K+ transporting subunit beta 2 (ATP1B2), solute carrier family 8 member A1 (SLC8A1), and cytochrome c oxidase subunit II (COX2)), GABAergic synapse (involving GABA type A receptor-associated protein like 1 (GABARAPL1), G protein subunit beta 5 (GNB5), and solute carrier family 38 member 2 (SLC38A2)), autophagy (involving GABARAPL1 and tumor protein p53-inducible nuclear protein 2 (TP53INP2)), and Fc gamma R-mediated phagocytosis (involving amphiphysin (AMPH)). These findings uncover new pathophysiological dimensions underlying PD, including the involvement of cardiac muscle contraction and specific mitochondrial activity. This knowledge not only contributes to better diagnostic precision but also paves the way for the development of new targeted therapies.Keywords: mRNAs; RNA sequencing; Parkinson’s disease; transcriptome analysis; substantia nigra

Soil naturally contains fluorine, but concerns arise when its levels or bioavailability are increased by human activities or specific compounds. South Korea faces challenges in regulating soil fluorine pollution despite implementing stricter total fluorine standards than many developed countries. Moreover, these regulations can be economically unfeasible because of the naturally high background levels of fluorine in the soil in Korea. This review explores the global landscape of soil fluorine management strategies and examines potential solutions that reconcile environmental protection with economic concerns. We recommend a shift towards regulating specific and hazardous fluorine compounds rather than total content, and prioritizing remediation efforts based on assessments of bioavailable fluorine. This approach may help Korea establish a more effective and sustainable strategy for managing soil fluorine pollution.

Viral integration within the host genome plays a pivotal role in carcinogenesis. Various disruptive mechanisms are involved, leading to genomic instability, mutations, and DNA damage. With next-generation sequencing (NGS), we can now precisely identify viral and host genomic breakpoints and chimeric sequences, which are useful for integration site analysis. In this study, we evaluated a commercial hybrid-capture NGS panel specifically designed for detecting three key viruses: HPV, HBV, and HIV-1. We also tested workflows for Viral Hybrid Capture (VHC) and Viral Integration Site (VIS) analysis, leveraging customized viral databases in CLC Microbial Ge-nomics. By analyzing sequenced data from virally infected cancer cell lines (including SiHa, HeLa, CaSki, C-33A, DoTc2, 2A3, SCC154 for HPV; 3B2, SNU-182 for HBV; and ACH-2 for HIV-1), we precisely pinpointed viral integration sites. The workflow also highlighted disrupted and neigh-boring human genes that may play a crucial role in tumor development. Our results included in-formative virus-host read mappings, genomic breakpoints, and integration circular plots. These visual representations enhance our understanding of the integration process. In conclusion, our seamless end-to-end workflow bridges the gap in understanding viral contributions to cancer development, paving the way for improved diagnostics and treatment strategies.

Data on pathologic changes of the 2019 novel coronavirus disease (COVID-19) are scarce. To gain knowledge about the pathology that may contribute to disease progression and fatality, we performed post-mortem needle core biopsies of lung, liver, and heart in four patients who died of COVID-19 pneumonia. The patients’ ages ranged from 59 to 81, including 3 males and 1 female. Each patient had at least one underlying disease, including immunocompromised status (chronic lymphocytic leukemia and renal transplantation) or other conditions (cirrhosis, hypertension, and diabetes). Time from disease onset to death ranged from 15 to 52 days. All patients had elevated white blood cell counts, with significant rise toward the end, and all had lymphocytopenia except for the patient with leukemia. Histologically, the main findings are in the lungs, including injury to the alveolar epithelial cells, hyaline membrane formation, and hyperplasia of type II pneumocytes, all components of diffuse alveolar damage. Consolidation by fibroblastic proliferation with extracellular matrix and fibrin forming clusters in airspaces is evident. In one patient, the consolidation consists of abundant intra-alveolar neutrophilic infiltration, consistent with superimposed bacterial bronchopneumonia. The liver exhibits mild lobular infiltration by small lymphocytes, and centrilobular sinusoidal dilation. Patchy necrosis is also seen. The heart shows only focal mild fibrosis and mild myocardial hypertrophy, changes likely related to the underlying conditions. In conclusion, the post-mortem examinations show advanced diffuse alveolar damage, as well as superimposed bacterial pneumonia in some patients. Changes in the liver and heart are likely secondary or related to the underlying diseases.

Diabetes mellitus, a chronic and non-transmissible disease, triggers a wide range of micro- and macrovascular complications. The differentiation of pancreatic β-like cells (PβLCs) from induced pluripotent stem cells (iPSCs) offers a promising avenue for regenerative medicine aimed at treating diabetes. Current differentiation protocols strive to emulate pancreatic embryonic development by utilizing cytokines and small molecules at specific doses to activate and inhibit distinct molecular signaling pathways, directing the differentiation of iPSCs into pancreatic β cells. Despite significant progress and improved protocols, the full spectrum of molecular signaling pathways governing pancreatic development and the physiological characteristics of the differentiated cells are not yet fully understood. Here, we report a specific combination of cofactors and small molecules that successfully differentiate iPSCs into PβLCs. Our protocol has shown to be effective, with the resulting cells exhibiting key functional properties of pancreatic β cells, including the expression of crucial molecular markers (pdx1, nkx6.1, ngn3) and the capability to secrete insulin in response to glucose. Furthermore, the addition of vitamin C and retinoic acid in the final stages of differentiation led to the overexpression of specific β cell genes.

Childhood obesity is a public health problem and most of the interventions are focused on healthy habits as reducing energy intake, avoiding a sedentary lifestyle and increasing physical activity. However, usually they are based in individual programs, with few structured interventions in health systems without satisfactory results. PinPo aims to carry out an integral intervention in children with obesity, as well as in their parents and caregivers, to get motivation to change towards healthy lifestyle habits. The program contains 9 educational grupal sessions directed by a multidisciplinary expert team. 10 boys and girls, and another group with 10 family members and/or caregivers participate in sessions during 90 min biweekly. Moreover, there is an individual adaptation depending on the severity and comorbidities. At the beginning and at the end of the program, an integral evaluation for health status is developed including anthropometric, nutritional, physical activity, and psychologist and analytical measurements. Finally, a satisfaction survey is carried out on the participants.In conclusion, the implementation of PinPo could offer to paediatric patients with obesity and their families, an integral intervention to treat obesity and its complications. So, there are expectations of achieving favorable results that also allow to optimize its effectiveness.

COVID-19 breakout in Italy has caused a huge number of severely ill patients with a serious increase in mortality. Although lungs seem to be the main target of the infection very few information are available about liver involvement in COVID-19 infection, that could possibly evocate a systemic disease targeting a lot of organs. Since now there are no reports of large series of histological evaluation of liver morphology in this setting. Knowledge of histological liver findings connected to clinical data is crucial in management of this disease.Post-mortem wedge liver biopsies from 48 patients died for COVID-19 infection were available from two main hospitals located in northern Italy, Lombardy; all sample were obtained during autopsies. No patient has a significant clinical complain of liver disease or signs of liver failure before and during hospitalization; for each of them laboratory data focused on liver were available. All liver samples showed minimal inflammation features; on the other side, many histological pictures compatible with vascular alterations were observed, characterized by portal vein braches number increase associated with lumen massive dilatation, partial or complete recent luminal thrombosis of portal and sinusoidal vessels, fibrosis of portal tract, focally severely enlarged and fibrotic. Our preliminary results concerning histological liver involvement in COVID-19 infection confirm the clinical impression that liver failure is not a main concern and this organ is not the target of significant inflammatory damage; histopatological findings are highly suggestive for marked alteration of intrahepatic blood vessel network secondary to systemic alterations induced by virus that could target, besides lung parenchyma, cardiovascular system, coagulation cascade or endothelial layer of blood vessels.

Lessons learned and risk-based outcomes from modernising the Australian Standard for post-mortem inspection and disposition judgement of beef, sheep, goat and pig carcases are described. Initial Risk Profiles identified priorities for quantitative assessments. The main difficulty encountered was the paucity of quantified performance of current inspection. Resolving this involved acquiring gross abnormality data representing regional production/proportional abattoir volumes, the range of gross abnormalities appearing nationally, proportional occurrence at carcase sites, and seasonality to enable comparisons. Evidence and discussion are provided for associated challenges experienced including preventing contamination, use of food chain information to support amendment, inspection as a part of industry Quality Assurance and opportunities to improve inspector training. Criteria considered by the Competent Authority for determination of equivalence of alternative post-mortem inspection techniques included comparisons of public health risk, non-detection rates for gross abnormalities, and microbial contamination resulting from inspection activities, as appropriate. Most gross abnormalities detected arose from animal health and welfare conditions affecting wholesomeness and did not present as food safety hazards. Non-detection rates between current and alternative inspection (observation) were negligible. A Quantitative Risk Assessment for Cysticercus bovis was conducted. Carcases with multiple gross abnormalities predominantly reflected historic infections (prior septicaemia) where trimming achieved wholesomeness unless cachexic.

Direct and indirect effects after mine operations cease must ideally be subject to perpetual monitoring routines in order to detect possible risks or avoid adverse effects on the surrounding ecosystems at an early stage. In this contribution, mining subsidence lakes created inside the nature reserve Kirchheller Heide and Hilsfeld Forest are subjected to analysis for a long-term monitoring scheme. For this purpose, we employ high-resolution unmanned aerial system (UAS)-based multispectral and thermal mapping tools to provide a fast, non-invasive and multitemporal environmental monitoring method. Specifically, we propose to monitor vegetation evolution through multispectral analysis, biotypes identification using machine learning algorithms, and water surface extent detection, together with their thermal behavior. The aim of this contribution is to present the proposed workflow and first results to establish a baseline for future analyses and subsequent surveys for longterm multi-temporal monitoring

This manuscript presents a new two-parameter unit stochastic distribution, obtained by transforming the Laplace distribution, using generalized logistic map, into a unit interval. The distribution thus obtained is named the Laplace-logistic unit (abbreviated LLU) distribution, and its basic stochastic properties are examined in detail. Also, the procedure for estimating parameters based on quantiles is provided, along with the asymptotic properties of the obtained estimates and the appropriate numerical simulation study. Finally, the application of the LLU distribution in dynamic and regression analysis of real-world data with accentuated "peaks" and "fat" tails is also discussed.

Three tiny bones compose the human ossicular chain: malleus, incus and stapes. Also known as auditory ossicles, they are united by joints in the middle ear cavity of the petrous part of the temporal bone. Completely developed 2 years after birth, the ossicular chain is involved in the physiological process of hearing, by which sound waves from the environment are converted into electrochemical impulses. In the last 500 years, most studies have focussed on the morphogenesis, morphological variability and clinical pathology of the ossicular chain, whilst only a few studies have added relevant knowledge to anthropology and forensic science. The auditory ossicles and the enclosing petrous bone are some of the hardest in the human skeleton. This reflects in a relative resistance to fire. In the post mortem period and in favourable circumstances, the auditory ossicles can fossilize and survive for millions of years. Post mortem loss in skeletal or decomposed remains can be ascribed to their destruction or physical displacement, by either macro-micro-faunal action and/or any other natural or artificial disturbance. Physical displacement is closely connected to the depositional environment of the skeletal remains, such as burial, entombment (sarcophagus, coffin, vault…), submersion or exposure to natural elements. Auditory ossicles can be recovered in situ, or very close to their anatomical location, when the skeletal material has been involved in an archaeological excavation. In the case of accessible or disturbed remains, scavengers may remove the tiny ossicles, and/or they can slip out of the middle ear cavity following skull movements. Entombment offers an effective protection against the displacement of the auditory ossicles, whereas aquatic submersion and aquatic movement almost invariably displace them. The preservation of the human auditory ossicles should be critically considered in the comprehensive context of any forensic investigation on human remains, since it can assist the reconstruction of their taphonomic history. Taphonomic histories of remains can add crucial information to forensic investigations (e.g., the Post Mortem Interval, PMI). The aim of this study, limited by scarce relevant literature, is to discuss the potential role of the ossicular chain, detected by post mortem imaging techniques, as a taphonomical indicator in decomposing and/or skeletonized bodies.

Several Lung diseases can result in lung damage structural changes, with lung transplantation as a only therapeutic option when the disease reaches an advanced progression, unfortunately, the success of lung transplantation is limited. In this context, lung bioengineering is considered a potential therapeutic alternative and the current approach is based on the use of the natural extracellular matrix (ECM) of the decellularized lung. The use of undifferentiated cells to seed an ECM can be a more practical strategy for lung bioengineering but the sterilization of the organ for this recellularization process is still a challenge. In this sense, Low-Level Laser Therapy (LLLT) can emerge as a potential treatment alternative. Therefore, the objective of this study was to verify if LLLT, can optimize lung recelularization with mesenchymal stem cells by cytokine modulation. For this, we decellularized lungs from C57BL/6 mice perfusing SDS 1% via pulmonary artery, sterilized with LLL (660nm, 100mW, 30s). Whole lung scaffolds were recellularized: (1) Recellularized Lung (2) Recellularized Lung + LLLT. Mesenchymal stem cells derived from human tooth pulp (DPSc) were seeded into lungs and incubated for 24 hours at 37ºC, 5% CO₂, in a bioreactor-like conditions, maintaining CPAP at 20cmH2O, 90% O2, and LLL at wavelength of 808nm, 100mW, 30s. Culture medium were analyzed at 24 hours. H&E, immunostaining, SEM and ELISA assay were performed. We produced viable biological scaffolds absent of DNA content, preserving glycosaminoglycans and collagen I, III and IV, fibronectin, laminin and elastin and lung structure (SEM). The levels of IL-6 and IL-8 were stable during the 24 hours of culture. IFN-γ levels showed significant difference in the DPSc and DPSc+LLLT group in the 24-hour evaluation. The levels of IL-10 decreased after LLLT. These findings highlight LLLT's role in cytokine regulation and contamination prevention during lung recellularization with mesenchymal stem cells. Overall, these results demonstrated that LLLT's modulated cytokine levels and could prevent contamination during the lung recellularization process with mesenchymal stem cells, offering promise for enhanced therapeutic strategies in lung bioengineering.

Precision medicine emphasizes fine-grained diagnostics, taking individual variability into account to enhance treatment effectiveness. Parkinson's Disease (PD) heterogeneity among individuals is a proof that disease subtypes exist, and assigning individuals to subgroups is necessary for a better understanding of disease mechanisms and designing precise treatment approaches. The purpose of this study was to identify PD subtypes using RNA-Seq data in a combined pipeline including unsupervised machine learning, bioinformatics, and network analysis. 210 post mortem brain RNA-Seq samples from PD (n = 115) and Normal Controls (NC, n = 95) were obtained with a systematic data retrieval following PRISMA statements and a fully data-driven clustering pipeline was performed to identify PD subtypes. Bioinformatics and Network analyses were performed to characterize the disease mechanisms of the identified PD subtypes and to identify target genes for drug repurposing. Two PD clusters were identified and 42 DEGs were found (p.adjusted ≤ 0.01). PD clusters had significantly different gene network structures (p < 0.0001) and phenotype-specific disease mechanisms, highlighting the differential involvement of the Wnt/β-catenin pathway regulating adult neurogenesis. NEUROD1 was identified as a key regulator of gene networks and ISX9 and PD98059 were identified as NEUROD1-interacting compounds with disease-modifying potential, reducing the effects of dopaminergic neurodegeneration. This hybrid data analysis approach could enable precision medicine applications by providing insights for the identification and characterization of pathological subtypes. This workflow has proven useful on PD brain RNA-Seq, but its application to other neurodegenerative diseases is encouraged.

The manuscript deals with a new two-parameter unit stochastic distribution, obtained by transforming the Gumbel distribution, using generalized logistic mapping, into a unit interval. The distribution thus obtained is called the Gumbel–Logistic Unit (abbr. GLU) distribution, and its key stochastic properties have been investigated in detail. Among others, it is shown that the GLU distribution, unlike the Gumbel one which is always positively asymmetric, can take both asymmetric forms. Also, the procedure for estimating parameters based on quantiles, along with the asymptotic properties of the obtained estimators and the study of their numerical simulation, is presented. Finally, the application of the GLU distribution in modeling some real–world data related to telecommunications is considered.

This study investigated the effects of fish oil (FO) treatment, particularly enriched with eicosapentaenoic acid (EPA), on obesity induced by a high-fat diet (HFD) in mice. The investigation focused on elucidating the impact of FO on epigenetic modifications in white adipose tissue (WAT) and the involvement of adipose-derived stem cells (ASCs). C57BL/6j mice were submitted to a control diet or a HFD for 16 weeks, treated (or not) with FO for the last 8 weeks. WAT was removed for RNA and protein extraction, while ASCs were isolated, cultured, and treated with Leptin. All samples were analyzed using functional genomics tools, including PCR-array, RT-PCR and Western Blot assays. Mice receiving HFD displayed increased body mass, fat accumulation, and altered gene expression associated with WAT inflammation and dysfunction. FO supplementation attenuated these effects, a potential protective role against HFD-induced obesity. Analysis of H3K27 revealed HFD-induced changes in histone, which were partially reversed by FO treatment. The study further explored leptin signaling in ASCs, suggesting a potential mechanism for ASC dysfunction in the leptin-rich environment of obese WAT. Overall, FO supplementation demonstrated efficacy in mitigating HFD-induced obesity, influencing epigenetic and molecular pathways, and shedding light on the role of ASCs and leptin signaling in WAT dysfunction associated with obesity.

Simple Summary (148 words) There is increasing evidence, that cannabinoids may play an important and dual role in tumour therapy. On one hand, they are cytotoxic against cancer cells with a low toxicity against normal, healthy tissues, and on the other, they may reduce typical side effects of chemotherapy. Publications on the main motive for use of cannabis (cannabinoids) by cancer patients show that patients' expectations exceed scientific facts. This article briefly describes results of combinations of cannabinoids with standard antineoplastic drugs on tumours and on side effects of tumour therapy. Although observations are still limited to animal studies with very few experiences in patients, preliminary data suggest that adjuvant cannabinoids may improve the survival of glioblastoma and perhaps of patients with other tumours. Benefits have also been reported about chemotherapy-induced nausea and vomiting, chemotherapy-induced peripheral neuropathic pain, loss of appetite and anxiety. Although results are promising, much more research is necessary. Abstract (192 words) Cancer, one of the leading causes of death worldwide, is on the rise. The high toxicity of conventional chemotherapy, often applied as drug cocktails, and resistance development limits the use of anti-neoplastic drugs and reduces the quality of life. With an easier access, a growing number of patients are using cannabis (cannabinoids) for alleviation of their symptoms, and in the hope of improving survival. This narrative article summarizes results observed with combinations of phytocannabinoids and standard chemotherapeutic agents in animal tumour models and in patients. Preliminary data suggest that standard antineoplastic agents combined with cannabinoids exert increased anti-cancer actions, reduce resistance development and improve survival. Respective experiences in patients are still scarce and concern small numbers with glioblastoma, and pancreatic carcinoma. Further benefits of combinations with cannabinoids have also been reported for chemotherapy-induced nausea and vomiting, loss of appetite (dronabinol), chemotherapy-induced peripheral neuropathic pain and anxiety (cannabidiol). In addition, phytocannabinoids, in particular cannabidiol, may play a role in the protection of organs such as heart, lung or kidney against chemotherapy-induced toxicity. Although results are promising, much more research is needed to determine whether positive experiences of adjuvant cannabinoids outweigh eventual risks.

The Sustainable Development Center of the University of Brasilia is one of the modernist buildings that make up the Darcy Ribeiro campus. The architectural project contains several recommendations for the execution of the flat roof waterproofing system, as well as details for rainwater runoff and drainage, which reveals a certain concern with watertightness. The research seeks to identify the relationship between the pathological manifestations recognized on the roof and the semicircular shape of the building, assessing the state of conservation through the use of damage maps as an analysis tool. The article is based on a field survey using aerophotogrammetry with a drone, the application of vector drawing software for graphic representation and discussion of the possible causes, agents and mechanisms of degradation at work. The results show the importance of mechanical protection for the good performance of the waterproofing system, as well as the need for correct sizing of expansion joints in order to absorb and relieve the stresses caused by hygrothermal variations. The methodology incorporated proved to be effective and economical in diagnosing and monitoring pathological manifestations, making it possible to plan maintenance actions that extend the useful life and preserve the intrinsic characteristics of building systems.

Regardless of the SARS-CoV-2 pandemic containment, it remains paramount to comprehensively understand its underlying mechanisms to mitigate potential future health and economic impacts, comparable to those experienced throughout the course of the pandemic. The angiotensin-converting enzyme 2 (ACE2) provide anchorage for SARS-CoV-2 binding, thus implicating that ACE and ACE2 might contribute to the variability in infection severity. This study aimed to elucidate predisposing factors influencing the disease course among people infected by SARS-CoV-2, focusing on angiotensin-converting enzyme (ACE) and ACE2 polymorphisms. Notably, despite similar demographics and comorbidities, COVID-19 patients exhibit substantial differences in prognosis. Genetic polymorphisms in ACE and ACE2 have been implicated in disease progression, prompting our investigation into their role in COVID-19 evolution. Using next-generation sequencing (NGS), we analyzed ACE and ACE2 genes in a sample group comprising six subjects infected by SARS-CoV-2. Our findings revealed a correlation between specific polymorphisms and COVID-19 outcomes. Specifically, ACE and ACE2 intronic deletions were observed in all deceased patients, suggesting a potential association with mortality. These results highlight the significance of genetic factors in shaping the clinical course of COVID-19, emphasizing the importance of further research into the impact of genetic variations on COVID-19 severity.

Poverty has long been associated intricately with neurological disorders. Majority of the previous studies designed to describe the effects of poverty on neurological ailments have mostly linked the association of hypoxic ischemic encephalopathy and nutritional deficiency disorders with poverty. Authors herein try to delve deeper into this issue. The association of begging with neuropsychiatric disorders is robust. The burden of probable autosomal dominant neurological ailments is very common among beggars; followed by neurological disorders with social stigma like abnormal movements, facial dysmorphism and gait unsteadiness. Dearth of support from family members in autosomal dominant neurological disorders (as family members are likely to be suffering from similar neurodegenerative disorder ) and poor perception about neurological diseases, misconceptions, myths and low educational attainment at large in the society can be implicated as the often overlooked but important factors underneath this association of begging and neurological disorders.

In this study, the team employed full-scale crash tests to investigate the impact of post-densification technology on the safety performance of separated central median W-beam barriers under low compaction conditions. By precisely simulating the design and construction environment of the central median, the study comprehensively evaluated the barrier's containment, redirection, buffering, and anti-intrusion performances, as well as the deformation of both the barrier and vehicles under various collision scenarios. The results indicate that under low compaction soil conditions, the A-level separated central median barriers reinforced with post-densification technology effectively meet the specified protection requirements. By comparing the influence of soil strength variations on barrier performance under simulated rainfall conditions, it was confirmed that enhancing soil compaction significantly improves soil stability, effectively increases the overall strength and stability of the barriers, reduces deformation, and significantly enhances safety performance. This study not only validates the effectiveness of the reinforcement scheme but also provides new perspectives for the scientific research of safety barriers and offers crucial technical support for the optimal design of road safety protection facilities.

Astragaloside IV (AIV) – triterpenoid saponin from the Astragalus mongholicus roots with the proved acetylcholinesterase (AChE)-inhibitory capability was used as the substance with the potential to attenuate memory impairment. Scopolamine (SCOP), antagonist of muscarinic cholinergic receptors and lipopolysaccharide (LPS), neuroinflammation inducer were used to impair memory processes in the passive avoidance (PA) test in mice. This memory impairment in the SCOP-treated mice was attenuated by the earlier intraperitoneal (ip) administration of AIV in the dose of 25 mg/kg. The reduction of memory impairment by LPS was not observed, therefore AIV does not reverse memory impairments through the anti-inflammatory mechanisms. All the studied doses of AIV did not affect basic locomotor activity of mice. As a result of the post-mortem analysis of mice body tissues, the largest content of AIV was determined in the kidneys, then in the spleen, liver and the smallest one in brain by mass spectrometry.

In today’s rapidly evolving digital landscape, the significance of password guessing techniques in both offensive and defensive strategies is paramount. Passwords serve as a crucial line of defense for both individuals and corporations, safeguarding their sensitive systems and data. Therefore, assessing the effectiveness of these access credentials is a critical task. However, existing research in this field often encounters limitations, such as a lack of sufficient training data and extended model training times. Current methods often struggle with limited training data and lengthy training times. This paper introduces BBPE-AE, a novel Auto Encoder Network (AE) designed for password guessing. BBPE-AE utilizes Byte-level Byte Pair Encoding (BBPE) to extract frequent tokens from password datasets without length restrictions, employing a dynamic window technique to capture complex patterns. Experimental results on Hotmail and Myspace datasets demonstrate exceptional performance, achieving high similarity rates (BLEU-Unigram: 0.90, BLEU-Bigram: 0.82 for Hotmail; BLEU-Unigram: 0.90, BLEU-Bigram: 0.81 for Myspace). BBPE-AE generates realistic passwords that meet HIBP (Have I Been Pwned) standards, minimizing duplication. These findings highlight the effectiveness of BBPE-AE in enhancing security by generating realistic passwords, ultimately safeguarding sensitive systems and data.

About 14% of adolescents experience mental illnesses globally. The rate increased after the COVID-19 pandemic. This study aimed to estimate the prevalence of COVID-related major mental illnesses (depression and anxiety) and their predictors among adolescents. This community-based cross-sectional study was conducted among 350 adolescents aged 10-19 years, recruited from rural communities in West Bengal, India. The study areas included 27 subcenters in the Budge Budge II Block, which comprised 1,91,709 population and 45,333 households. Data were collected from randomly selected households by trained research assistants through house-to-house interviews. Pretested standardized questionnaires, Patient Health Questionnaire (PHQ) for depression, Generalized Anxiety Disorder (GAD) for anxiety, and a demographic questionnaire were used for data collection. The prevalence of anxiety was 35.7% (125 out of 350), and the prevalence of depression was 30.0% (105 out of 350). Females had significantly higher scores of anxiety (6.67 ± 4.76 vs. 3.42 ± 3.17, respectively, p <0.001) and depression (5.51 ± 4.99 vs. 3.26 ± 3.86, respectively, p <0.001) compared to males. Adolescents who had COVID-19 cases or deaths in the family had significaly higher scores of anxiety and depression compared to those who didn’t have these events. In multivariate analysis, the statistically significant predictors of anxiety were COVID-19 death in the family, COVID-19 cases in the family, female gender, and a lower income group (p <0.001 for all). For depression, the significant predictors included COVID-19 death in the family, COVID-19 cases in the family, female gender, a lower income group, and a higher age group in adolescents (p <0.001 for all). Based on the study results, we recommend that immediate attention is needed for adolescents’ mental health support and coping with stresses following COVID-19.

Both, in developed and developing countries, atmospheric pollution with particulate matter (PM) remains an important issue. Despite the health effects of poor air quality, studies on air pollution are often limited by the high costs of continuous monitoring and the need of extensive sampling. Furthermore, these particles are often enriched in potentially toxic trace elements and organics pollutants. This study evaluates both, the composition of atmospheric dust accumulated during a certain time-span on leaves of Hedera helix and Senecio cineraria, as well as the potential to use them as bio-monitors. The test plants were positioned nearby automatic air quality monitoring stations at four different sites with respectively high, moderate and low traffic intensity. Gravimetric deposition of PM10 and PM2.5 on leaves was consistent with data recorded by the monitoring stations and related to the weather conditions reported by Argentina´s National Meteorological service. To determine the presence of trace elements enriching the PM deposited on leaves, two analytical techniques were applied, XRF (not destructive) and ICP (destructive). The results indicated that only in the unpaved street location (site 2), PM10 and PM2.5 concentrations in the air exceeded WHO guidelines. However, several trace elements were found enriching PM deposited on leaves from all sites. Predominantly, increased concentrations of Cd, Cu, Ti, Mn, Zn and Fe were found, which were associated to construction, traffic and unpaved street sources. Furthermore, based on its high capability to sequester PM and trace elements Senecio cineraria can be take into consideration to be adopted as a bio-monitor or even for PM mitigation.

Weather-related risks in aviation are one of the main causes of accidents worldwide. This article aims to analyze aviation risks resulting from adverse weather conditions, using the case study of the Pucallpa accident that occurred on August 23, 2005, in eastern Peru. In this analysis, we have determined the relationship between meteorological information and aviation risks, presented a matrix of risks associated with the most predominant meteorological variables at Pucallpa airport, and drawn up three maps of meteorological risks indicating the month of the year in which their incidence is most relevant. Finally, we conclude that it is essential to emphasize the importance of considering the prevailing weather conditions at Pucallpa airport to help mitigate the potential risks that may occur during different phases of the flight.

Background: The cumulative exposure of UV radiation can result in dangerous consequences such as skin burns, photoaging, and skin cancer, hence the importance of using photoprotective formulations. Currently, the formulations seek to be more efficient, innovative and reach a wider audience. Many sunscreens are vegan, and have antioxidant substances to ensure additional photochemoprotective action. To evaluate biological, functional, and mechanical characteristics of them on the skin, biometric and rheologic methods can be used. Objective: Evaluate biophysical, rheological and sensorial parameters of Face Care Facial Moisturizing Cream® (P1) and a vegan formulation (P2) by in vitro and in vivo tests. Methods: A UV scan experiment was performed covering the range of 250 to 400 nm. Sun Protection Factor (SPF) was evaluated by Mansur method. Rheological profiles were obtained using a MARS II (Haake®) controlled shear stress and gradient rheometer. Biophysical parameters were analyzed: skin sebum content, hydration level, transepidermal water loss, erythema and melanin level, skin color, and skin pH. The acceptance profile of the formulations by the volunteers was determined using a 9-point hedonic scale and a 5-point purchase intention test. Results: The formulations effectively absorbed light covering the UV radiation spectrum from UVA to UVB. The SPF of P1 was 25.21 and of P2 was 12.10 by in vitro tests. They had also pseudoplastic and thixotropic behavior, it can contribute to better spreadability and to form a protective film. Biometric tests showed an increase in hydration and skin sebum, decreased erythema, and maintenance of skin pH after application of both formulations. The products also had similarly good acceptance and purchase intention by the volunteers. Conclusion: The comparation of a commercialized product and a vegan test version showed very similar rheological and great acceptance profiles. Therefore, the vegan formulation is a good alternative to reach a different market.

Our environment has been impacted by man-made pollutants mainly industries make substantial use of synthetic dyes which exhibit cytotoxicity and have significant environmental consequences. Effective photocatalyst-based approaches for degrading synthetic dyes into less toxic chemical are of great interest. Synthesizing NPs using biological approaches, particularly plant-based approaches offer advantages, decreasing the risk of NPs losing biocompatibility during synthesis, cost-effectiveness, and eco-friendliness. In this study, we employed a green synthesis method to produce manganese oxide nanoparticles (MnO NPs) utilizing leaf extract from the Lathyrus Aphaca plant. The synthesized MnOx NPs were characterized through various techniques; X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), Fourier-transform infrared spectroscopy (FTIR), and UV–visible spectroscopy. XRD analysis showed distinct peaks, indicated the presence crystallographic planes within the MnO₂ nanoparticles, thus confirming their crystalline structure. SEM study highlighted closely packed configurations with average size of approximately ≥ 50-70 nm, with well-defined boundaries. EDX analysis showed the presence of elemental manganese (Mn) in the samples, with peaks corresponding to Mn detected at lower energy levels, predominantly represented by MnO. FTIR, showed the presence of the O-O stretching mode at a frequency of 719 cm^-1, the presence of MnO₆ oxides of manganese, and peak at 548 cm^-1 corresponded to the Mn-O stretching mode. Furthermore, the green-synthesized manganese oxide nanoparticles exhibited promising photocatalytic and adsorption capabilities against Methylene Blue (MB) dye, leading to approximately 93.21% degradation of MB when treated with the green-synthesized MnO nanoparticles derived from plant extract. This highlights the efficacy and potential of these nanoparticles in environmental remediation applications, particularly in the degradation of methylene blue contaminants.

A monocular vision pose estimation and identification algorithm used on a small spacecraft for future orbital servicing is studied in this paper. A tracker spacecraft equipped with a short-range vision system is proposed to recover the 3D structural model of a space target in orbit and automatically identify its solar panels and main body using only visual information from an onboard camera. The proposed reconstruction and identification framework is tested using structure-from-motion and point cloud identification methods. The Efficient Perspective-n-Points (EPnP) descriptor is used for pose estimation. Triangulated points are used for component segmentation by means of orientation histogram descriptors. Experimental results based on laboratory images of a spacecraft model show the effectiveness and robustness of our approach.

This article describes the POTENTIALS project, which aimed to develop business models for the reuse of former industrial and mining sites in different regions. The project focused on the creation of eco-industrial parks as a result to enable sustainable energy production and reduce waste and pollution. A key aspect was the Territorial Impact Assessment (TIA), a new and complex policy assessment tool. Therefore, the TEQUILA (Territorial Efficiency Quality and Identity Layer Assessment) approach is used to describe the TIA and emphasizes its application in assessing the impact of EU policies and projects on territorial cohesion. It underlines the need for a differentiated understanding of the regional characteristics and potential impacts of policies; and stresses the importance of regionalized impact models for the assessment. Furthermore, the process and results of applying the TEQUILA methodology to assess the territorial impact of different scenarios of business models within the POTENTIALS project is given.

The accumulation of brown algae from the genus Sargassum has been increasing over the years in coastal regions of the Caribbean, Africa, Brazil, and Mexico. This causes harmful effects to the ecosystem, health, economy, and climate due to gas emissions from its decomposition process. There is the possibility of this biomass being reused in civil construction, and few studies have been carried out on its application to common Portland cement mortar. As such, the objective of this study is to evaluate the potential of sargassum ash as a mineral addition to partial replacement of fine aggregates in Portland cement mortar. Characterizations of the raw materials were carried out through X-ray fluorescence spectroscopy, loss on ignition, particle size distribution, Brunauer–Emmett–Teller (BET), real density, X-ray diffraction, scanning electron microscopy, and dispersion spectroscopy of electrons. The mortars were prepared by partially replacing the fine aggregate (sand) with sargassum ash, at 0%, 5%, 10% and 20%. Mortar performance was evaluated through water absorption, apparent porosity, apparent specific mass, compressive strength after 7, 28, and 63 days after curing. Lastly, a life cycle assessment in accordance with ISO standards 14040:2006 and 14044:2006. The results showed that replacing sand with sargassum ash increases water absorption, apparent porosity, and decreases the apparent specific mass and compressive strength as replacement increases. Nevertheless, the compressive strength results after 63 days, for 5 and 10% replacement did not differ statistically from reference values. The life cycle assessment indicates that mortars with partial replacement of sand by sargassum ash showed positive environmental impacts when compared to reference values for most categories regardless of the scenario analyzed, especially for mortar with 10% replacement. As such, the use of sargassum ash at 10% does not alter compressive strength values after 63 days while reducing its environmental impact. The application of this biomass in civil construction materials provides a destination for this algae that has been causing several social, environmental, and economic problems.

Correlations among estrus cycle, pyometra, and canine diabetes mellitus (CDM) have been described since the late 1950s, and substantial progress in understanding mechanisms beyond was achieved nowadays. Progesterone-related diabetes mellitus (PRDM) in dogs is known for its particular potential for diabetes remission. Thus, a deep understanding of the physiopathological aspects involved is crucial to postulate treatment guidelines to improve the PRDM remission rate, as well as to inform preventive measures. This narrative review aims to provide relevant detailed information on 1) canine estrus cycle and its impact on CDM etiology and management, 2) the role of pyometra as a further cause of insulin resistance, and 3) useful individual therapeutic and preventive strategies. Pharmacological annulment of progesterone effects, as well as inflammatory and progesterone-related conditions resolution in association with adequate exogenous insulin therapy, and residual beta cell function, are key aspects to achieve remission, or at least to improve diabetic clinical control. In this way, spaying should be considered mandatory in most PRDM cases. Preventive measures against CDM can include spaying recommendations; however, individual-based recommendations should be considered since castration may be associated with some long-term health issues.

Sporotrichosis’ clinical manifestations, lesions in the cutaneous or subcutaneous tissues, it is caused by dimorphic fungi of the Sporothrix complex, is a cosmopolitan mycosis that affects humans and animals. This study aimed to identify prevalent species in Minas Gerais, Brazil, and characterize virulence profiles and antifungal susceptibility associated with Sporothrix isolates. Isolates were identified using macro and micro-morphological traits as well molecular biology techniques. Antifungal susceptibility was determined using the Minimal Inhibitory Concentration test, while, virulence factors such as growth at different temperatures, biofilm formation, melanin production, and urease activity were assessed. Our findings revealed S. brasiliensis as a predominant species isolated. Urease activity was a crucial factor associated with growth at 50°C in S. brasiliensis isolates, highlighting their high thermotolerance. Furthermore, strains isolated from humans produced a more robust biofilm compare to those from felines. Strains of S. brasiliensis isolated from Felis catus exhibited faster melanin production, decreased susceptible to antifungal agents tested, and superior growth capacity at 50°C to strains isolated from humans. Therefore, our study highlights the prevalence of S. brasiliensis causing sporotrichosis in both human and felines. However, it underscores the circulation of different strains, with varying levels of virulence and susceptibility to antifungal agents.

Our research aims to address the urgent need for retrofitting measures to enhance the resilience of damaged coupling beams in real-life scenarios. We conducted a series of tests on scaled-down prototype coupling beams, carefully adhering to similarity theory requirements to ensure accurate representation. The test results showed that the chord rotation capacities of different specimens with the same diagonal bundle varied significantly due to the difference in the confinement levels. The specimens with lower level of confinement were found to have less displacement capacity. When the specimens were strengthened by wrapping with GFRP after damage, it was observed that the increase in confinement level significantly increased the chord rotation capacities of all specimens. In addition, in the tests before the strengthening, the elongation behavior of the specimens is observed until the damage development reaches approximately 2% chord rotation. With the in-crease in chord rotation, the elongation behavior of the specimens stops with increasing damage and then shortening behavior is observed. After retrofitting, it was observed that the axial elongation continued in a limited manner depending on the location and size of the concrete separated from the beam core in the case of collapse before strengthening, and then the beam showed a shortening behavior predominantly. After strengthening studies, our findings contribute valuable insights into the behavior and performance of damaged coupling beams, emphasizing the potential of urgent GFRP wrapping as a viable solution to enhance the seismic resilience of middle- and high-class buildings with structural walls after seismic events.

The main goal of optimization is to find factors values that bring minimum feedstock consumption or maximum final product or services of the production process. In a production process, the factors that make up the model that describes it are usually the properties of the final product. In the case of biodiesel, which is the final product of the process that is the object of study, among the various properties, the glycerol content is among the most important. The present study aims to maximize the model yield that defines glycerol content on the biodiesel composition. This optimization was executed by a hybrid metaheuristic algorithm (SAGAC),and its experimental results are compared with other optimization techniques named by RSM (Response Surface Methodology). After run the experimental assays, SAGAC algorithm has find the follow values of model factors: molar ratio = 3(mol/mol), catalyst content = 0.52 (wt%), reaction temperature = 49(^oC), Time = 45 (min) generating model yield of 14.46 that, match with EN 14105 standard value of 0.33 (wt%). Comparing results between SAGAC and RSM methodologies, SAGAC has presented an improvement of 31%.

This study investigates the emerging applications of Artificial Intelligence (AI) in strategic management and its impact on organizational decision-making processes. As AI technology rapidly advances, it has become a crucial component in redefining organizational strategies. According to a global survey by the Boston Consulting Group, over 60% of executives believe that AI can significantly improve key performance indicators and enhance opportunities for strategic differentiation and sustainable competitive advantages. Using a descriptive-survey methodology and questionnaire-based data collection, this research examines the influence of AI on strategic decision-making in large organizations. The statistical population comprises senior managers across various industries, with sampling conducted through convenience sampling. Data analysis was performed using SMART-PLS software, revealing significant improvements in strategic decision-making processes through AI implementation. The study demonstrates that AI, by analyzing complex data sets and identifying hidden patterns, assists managers in making more optimal decisions. Furthermore, AI's predictive analytics capabilities contribute to enhanced strategic planning and risk mitigation in decision-making processes. The research findings indicate a statistically significant positive correlation (r = 0.72, p < 0.001) between AI adoption and the quality of strategic decisions. This paper concludes by proposing that organizations should leverage AI as a tool to strengthen their organizational strategies, while emphasizing the importance of ethical considerations and human oversight. The implications of this research extend to both academic and practical domains, offering insights into the integration of AI in strategic management processes and its potential to revolutionize organizational decision-making paradigms.

Purpose: This study investigates the influence of human brands on the formation of Generation Z's digital identity. Given the increasing importance of the digital space in this generation's life, understanding how their identity is shaped by human brands in this environment is crucial. Method: Using a netnographic approach, qualitative data was collected and analyzed from 500 posts and interactions of Gen Z users on Instagram and TikTok platforms. Thematic content analysis was conducted using NVivo 12 software, with inter-coder reliability confirmed (κ = 0.85). Findings: Results indicate that human brands influence Gen Z's digital identity through three main mechanisms: 1) lifestyle emulation (β = 0.42, p < 0.001), 2) value alignment (β = 0.38, p < 0.001), and 3) self-presentation modeling (β = 0.35, p < 0.01). Multiple regression analysis showed these three factors explain 67\% of the variance in digital identity formation (R² = 0.67, F(3,496) = 335.42, p < 0.001). Conclusion: This study demonstrates that human brands play a significant role in shaping Generation Z's digital identity. Understanding this influence can help marketers and policymakers design more effective strategies for engaging with this generation.

The COVID-19 pandemic has profoundly disrupted small businesses, exacerbating financial vulnerabilities and operational challenges. As these enterprises play a crucial role in economic stability and growth, identifying effective recovery strategies is imperative. This study investigates the legal and management solutions necessary for small businesses to recover and thrive post-pandemic. The research aims to examine the economic impact of the COVID-19 pandemic on small businesses, evaluate the effectiveness of existing legal and governmental support measures, and propose management strategies that enhance resilience and drive recovery. A mixed-methods approach was adopted, comprising both quantitative and qualitative analyses. A survey was conducted with 500 small businesses across various sectors to collect data on financial performance, operational disruptions, and the utilization of government support programs. Additionally, 30 in-depth interviews with small business owners provided qualitative insights into adaptive strategies and challenges faced. A review of relevant legal documents and policy frameworks was also performed to assess the support mechanisms in place. The study revealed that 68% of small businesses experienced substantial revenue losses, with 50% encountering severe liquidity crises. Government support measures, such as grants and low-interest loans, were pivotal but often marred by accessibility issues and delays. Successful management strategies identified included accelerating digital transformation, diversifying revenue streams, and optimizing supply chain management. Legal measures that temporarily eased regulatory requirements and offered tax relief significantly aided in alleviating immediate pressures. The economic recovery of small businesses post-COVID-19 hinges on comprehensive legal and management solutions. Enhancing the effectiveness and reach of government support programs is crucial, as is the adoption of agile and innovative management practices by small businesses. Policymakers and business leaders must work collaboratively to create an environment that fosters resilience and sustainable growth, ensuring small businesses can navigate future economic uncertainties.

This study evaluated the presence of Human Papillomavirus (HPV) and Bovine Leukemia Virus (BLV) DNA in breast cancer (BC) samples from women in Northeastern Brazil. We analyzed 186 formalin-fixed, paraffin-embedded tissue block samples using PCR and qPCR to detect HPV and BLV DNA. BLV DNA was not detected in any BC patients. However, HPV DNA was found in 46.2\% of the BC samples: 44.6\% were positive for HPV16, 3.5\% for HPV31, and 2\% were coinfected with HPV16 and HPV31. Additionally, we found an association between HPV-positive BC and Ki-67 expression (P=0.03, OR=1.85; CI=1.02-3.34), as well as between HPV31-positive BC and mitotic index (P=0.047). Although BLV was not detected in BC patients from Northeastern Brazil, the association between HPV and cell proliferation markers warrants further investigation, as HPV may contribute to the aggressiveness of BC in these patients.

Peste des Petits Ruminants (PPR) is one of the major transboundary animal diseases that severely impact livestock production and trade worldwide. An investigation was carried into the seroprevalence and risk factors of PPR in small ruminants, camels, and wild ruminants in Bahrain. A total of 1240 serum samples were collected from 119 sheep flocks and 1224 serum samples from 125 goat herds. In addition, 100 sera from camels and 38 sera from wild ruminants, were collected. Serum samples were tested for the presence of PPR specific antibodies using a competitive ELISA. Flock management and health information of the flocks and herds were collected using a semi-structured questionnaire. The individual prevalence of PPR in sheep and goats was 26% and 25.5%, respectively. The flock or herd level prevalence of PPR was 22.7% and 29.6% in sheep and goats, respectively. None of the tested camels or wild ruminants were positive for PPR-specific antibodies. Sheep and goats from the Northern governorate were more likely to be seropositive to PPR than in other governorates. On the individual animal level, the univariate analysis suggested; age (&lt;12 months), sex (male), and health status (weak animals) as risk factors for PPR seropositivity. On the flock/herd level, the multivariable logistic regression analysis identified large flock/herd size and semi-intensive farming as risk factors for PPR seropositivity.

The greatly diversified flowering plants (angiosperms) are the dominating and defining group in the current earth ecosystem. However, from which group by what way the flowers, especially their gynoecia (key characteristics of angiosperms), are derived have been the questions in botany unanswered over centuries. Such an embarrassing situation can be attributed to the lack of plants with partially enclosed ovules, which are supposed to be a post between gymnosperms and angi-osperms. Here we report a fossil plant that has an apparent coniferous vegetative and reproduc-tive morphologies but has a single seed partially wrapped by the subtending bract. Such a mor-phology suggests that the carpels in angiosperms may be equivalent to bracts enclosing their axil-lary seed(s). Such a non-traditional interpretation of the homology of angiosperm carpels is com-patible with various new progresses made in botany and is in line with Tomlinson’s recent hy-pothesis. Together with other fossil evidence reported recently, it appears that gynoecia in angio-sperms are derived in multiple ways.

Nowadays, microfluidics has become an anarchist interdisciplinary topic with considerable attention in a wide range of biotechnology applications. In this research work, numerical investigation of microfluidic micro-mixer is carried out using hybrid actuation approach with different micropillar shapes and gaps. For this purpose, COMSOL Multiphysics is used with three different physics such as thermoviscous acoustic to solve acoustic governing equations, laminar physics is used to solve fluid flow governing equations and diluted transport species is used to solve mixing governing equations. The simulations were carried out with flow velocity of 200 µm/s at both inlets with an oscillation frequency of 15kHz. The outcomes were in the form of acoustic characteristics such as acoustic pressure, acoustic velocity, acoustic streaming and mixing index. The results revealed that the inclusion of micropillars enhanced the mixing performance and strength of acoustic field resulting in improvement of mixing performance compared to the case without micropillars. In addition, it was also investigated that blade shape micropillars with 0.150 mm gaps deliver best results compared to the other cases with maximum and minimum values of the mixing index 0.95 and 0.72 respectively. The obtained results can be extremely helpful for design and modifications of hybrid microfluidics micro-mixer.

The interaction of poly(trimethylene carbonate) (PTMC) with alcohols were investigated as a model for polymer blending with polysaccharides. While 1-butanol, 2-butanol, ethylene glycol, 1,2-cyclohexanediol showed almost no detectable interaction with PTMC at both of solution state with 1H NMR and solid states of FT-IR, glucose and cellobiose suggests slight change of spectral pattern in FT-IR analysis. The thermal properties of the blending samples of PTMC and these alcohols were also investigated. Although the blend of PTMC with 1-butanol, 2-butanol, and ethylene glycol did not influence on thermal degradation behaviors due to the low boiling points to maintain the structure at blend sample preparation, however, the blend with PTMC and glucose or cellobiose tend to increase thermal resistances and increase glass transition temperature, hence, showed an existence of interaction through hydrogen bonding.

The abundant and renewable resources from fruit byproducts are getting emphasis on their valorization. These byproducts are suspected of possible toxications during cultivation, harvesting, transporting, preservation, or processing. Hence, presenting scientific overviews of the toxicological qualities and detoxification trends of these byproducts is critical to implicating their possible valorization. This review emphasized the toxicological qualities of byproducts from fruits for which the maximum global production occurred in 2022. In this review, heavy metals (As, Cd, Co, Cr, Ni, Pb, and Hg), mycotoxins, toxicant organic compounds, anti-nutritional factors, and pesticide/fungicide residues of the selected fruit byproducts were discussed. Current trends to reduce possible toxicants of these byproducts during their valorization were emphasized. Novel functional foods valorized from these fruit byproducts and future perspectives of detoxification were also focused on in this review.

Sterol homeostasis in mammalian cells and tissues involves balancing three fundamental processes: de novo sterol biosynthesis; sterol import (e.g., from blood-borne lipoproteins); and sterol export. In complex tissues, composed of multiple different cell types (such as the retina), import and export also may involve intra-tissue, inter-cellular sterol exchange. Disruption of any of these processes can result in pathologies that impact the normal structure and function of the retina. Here, we provide a brief overview of what is known currently about sterol homeostasis in the vertebrate retina and offer a proposed path for future experimental work to further our understanding of these processes, with relevance to the development of novel therapeutic interventions for human diseases involving defective sterol homeostasis.

The prevalence of corona virus and the novel COVID-19 disease in the entire globe has exacerbated different impact on socioeconomic spectrum in the world, including water use pattern. Thus a research was conducted to examine the comparative use of water during pre- and post-COVID-19 lockdown pattern among post-primary schools in Iwo, Osun State, Nigeria. A survey was conducted among fifteen schools which were randomly selected, but with eight public and seven private schools for the investigation. Both descriptive and inferential statistical techniques were used in data analysis. The results revealed that the major source of water to the schools investigated is ground water which is obtained through hand-dug wells and boreholes. It was further discovered that there was increase in water use during post-COVID-19 lockdown era as a result of the directive by the government that clean water should be provided for hand-washing by all schools regardless of the owner to curtail the spread of COVID-19 disease in the country. One sample t-test also revealed that there was a significant difference in water use at (p<0.01) level. It is recommended that the government and other stakeholders in water sector to ensure that all-time and non-seasonal dependent source of water be provided rather than ground water source which is susceptible to variations in water yields from seasonal variations. This will enable continuous clean water supply, for all purposes, including COVID-19 protocols.

Convolutional Neural Networks (CNNs) present drawbacks for modeling geometric transformations, such as scaling and rotation, caused by the convolution operation’s locality. Deformable convolution (DCON), a mechanism that substitutes standard convolution, increasing the receptive field to capture relevant features, is a promising approach to solve this drawback and improve the robustness of CNNs. However, the optimal way to replace the standard convolution with its deformable counterpart in a CNN model is unclear. In this study, we clarify this aseveration by conducting several experiments using deformable convolutions applied in the layers that conform a small four-layer CNN model. We also use deformable convolutions on the four-layers of several ResNet CNNs with depths 18, 34, 50, and 101. The models were tested in binary balanced classes with 2D data for image classification: Cats &amp; Dogs, EyesPACS, Spyders &amp; Chickens, and Shapes. After this testing, we evaluated DCON in 3D data for action recognition: UCF101 and Human2 (a dataset we compiled to control movement, clothing and background). The contribution of this research lies in a guideline to use DCON. It can be summarized as follows: if DCON is used on the first layers of the proposal of model (with simple features), the computational resources expressed as the quantity of Flops will tend to increase and produce bigger misclassification than the standard CNN. However, if the DCON is used at the end layers, the quantity of Flops used in the training and testing will decrease, and the classification accuracy will improve by up to 20% about the base model. Moreover, it gains robustness when using deformable convolutions because it can adapt to the region of interest. Also, the best kernel size of the DCON is three. It showed better results than size five. In the last case, the quantity of Flops increase quadratically, but their performance does not increase significantly. With these results, we propose a guideline to use the DCON and contribute to understanding the impact of DCON on the robustness of CNNs.

Interest on psychosocial predictors of doping has been increasing as a way of finding new approaches to reduce use of performance-enhancing drugs. This investigation aimed to test the psychometric properties of an instrument to asses doping attitudes in Brazilian athletes. The PEAS was validated to Brazilian sports through a process of translation, back-translation and content validity assessment, presenting satisfactory evidences based on its content (CVC&gt;0.80). Then, 994 athletes, from different sexes, types of sports and competitive levels, answered to the Brazilian version of the PEAS. Results showed satisfactory evidences of validity based on its response process, internal structure [X2/df = 2.04; RMSEA = 0.032 (0.026-0.038); CFI = 0.96; TLI = 0.95] and reliability (Cronbach’s α, McDonald’s ω, and CR &gt; 0.70). Network analysis was also used to further explore PEAS’s internal structure. Overall results provide support for the adoption of the PEAS for Brazilian athletes and possibly other Portuguese-speaking countries.

This paper mainly explores the feasibility of using desert sand (DS) and recycled aggregate in cement stabilized base. Recycled coarse aggregate (RCA) and DS serve as the substitutes of natural coarse and fine aggregates, respectively, in cement stabilized base. A four-factor and four-level orthogonal test is designed to analyze the unconfined compressive strength, splitting tensile strength, and compressive resilient modulus. Furthermore, this paper investigates the effects of cement content, fly ash (FA) replacement rate, RCA replacement rate, and DS replacement rate on the road performance of cement stabilized base composing of RCA and DS. The test results reveal that the performance of cement stabilized base with partial RCA instead of natural coarse aggregate (NCA) and partial DS instead of natural fine aggregate satisfy the road use. Meanwhile, DS is beneficial to improve the strength of cement stabilized base. The correlation and microscopic analyses of the test results imply the feasibility of applying DS and recycled aggregate to cement stabilized base. It is hoped that this paper can offer a solid theoretical foundation for promoting the application of DS and recycled aggregate in road engineering.

Our environment has been significantly impacted by man-made pollutants, primarily due to industries make substantial use of synthetic chemicals, resulting in significant environmental consequences. In this research investigation, the co-precipitation approach was employed for the synthesis of cellulose-based ferric oxide (Fe₂O₃/cellulose) and copper oxide nanoparticles (CuOx-NPs). Scanning electron microscopy (SEM) analyses were conducted to determine the properties of the newly synthesised nanoparticles. Furthermore, the synthesized nanoparticles were employed for eliminating chromium from aqueous media under various conditions, including temperature, contact time, adsorbent concentration, adsorbate concentration, and pH. Additionally, the synthesised materials were used to recover Cr(VI) ions from real samples, including tap water, seawater, and industrial water, and the adsorptive capacity of both materials evaluated under optimal conditions. The synthesis of Fe₂O₃/cellulose and CuOx-NPs proved to be effective, as indicated by the outcomes of the study.

Twelve clinically healthy and sexually mature New Zealand White rabbits were studied. The non-contrast imaging included T1-weighted and T2-weighted spin echo and gradient echo sequences in transverse, sagittal and dorsal planes. Transverse MRI (Т2-weighted image) through L1 demonstrated only the right kidney. The transverse T2-weighted image through L2 showed both kidneys. The cranial part of the urinary bladder on T1-weighted transverse scans through L4 was flexed to the left. The T2-weighted sagittal image 30 mm to the right of the median plane showed the right kidney, the right ureter and the urinary bladder. The T2-weighted sagittal image 30 mm to the left of the median plane showed part of the left kidney, the left ureter and the urinary bladder. The T2-weighted sagittal image 45 mm to the left of the median plane presented the lateral part of the left kidney. The dorsal MRI image (Т2-weighted sequence) through the horizontal plane 30 mm ventral to the spine demonstrated the whole organs. The data will be useful in imaging anatomy and diagnostic studies of various pathologies of the excretory system in rabbits and other mammalian species.

Improvement of hydrophysical properties and corrosion resistance of self-compacting concrete to the effects of alternate freezing-thawing and aggressive soils of southern and central Kazakhstan is of interest to a wide range of researchers from the side of practical application of the obtained results in construction practice. It is proposed to form a spatially reinforced fine crystalline structure of cement matrix with maximum dense packing by using a complex modifier (Hyperplasticiser + Polymer + Microsilica + Fibro fibers) in the composition of self-compacting concretes (SCC). The introduction of the calculated amount of the above additives increases the operational reliability of the current SCC compositions, increasing the water resistance to W16, frost resistance to F=500, increasing the compressive strength by 20%, reducing the mass loss of samples during corrosion leaching to 50%. It has been experimentally established that the proposed addition of complex modifier (Hyperplasticiser + Polymer + Microsilica + Fiber fibers) to the SCC composition allows obtaining self-compacting concrete of high quality with improved performance characteristics (compressive strength, water resistance, frost resistance and corrosion resistance). Studies have shown that the complex modifier-modified SCC compositions have a high degree of resistance in aggressive environments and leaching corrosion. Based on the results of the conducted tests, it is possible to recommend the obtained SCC compositions for production of building products working in the zone of alternating freezing-thawing and aggressive soils.

In the field of quality control, the critical challenge of analyzing microdefects in steel filament holds significant importance. This is particularly vital as steel filaments serve as reinforced fibers in the use and applications within various component manufacturing industries. This paper addresses the crucial requirement of identifying and investigating microdefects on steel filaments. Eddy current signals are used for the identification of microdefects, and an in-depth investigation is conducted. The core objective is to establish the relationship between the depth of defects and the signals detected through the eddy current sensing principle. The threshold of eddy current instrument was set at 10%, corresponding to a created depth of 20 µm, to identify defective specimens. A total of 30 defective samples were analyzed, and the phase angles between the experimental and theoretical results were compared. The depths of defects ranged from 20 to 60 µm, with one sample having a depth exceeding 75 µm. The calculated threshold of 10.18% closely aligns with the set threshold of 10%, with a difference of only 1.77%. The resulting root mean square error (RMSE) was found to be 10.53 degrees, equivalent to 3.49 µm for the difference in depth and phase between measured results and estimated results. This underscores the methodology's accuracy and its applicability across diverse manufacturing industries.

This research critically examines the dichotomies in urban public space and discussions on city evolution over the past two centuries. The original discourse identified amplifies the importance that inclusivity needs to address issues deeper than physical accessibility. The growing diversity and changes seen in urban public open spaces are followed throughout history along a timeline of important socio-political and planning injectors in the Western world. These public spaces are the important spine connecting all the private and semi-private parts of the city. Urban public spaces have seen population changes due to globalisation, resulting in mobility and changes due to the different needs of its diverse user base. In this paper, a rigorous quasi-chronological investigation is presented. Firstly, the context of the evolution of space is established. Secondly, a closer focus on inclusion research provides a thorough analysis of the utopian city plans, the development of Haussmann's Paris and the later plans of the Centrist and the Decentrist. Thirdly, a critical and analytical understanding of the effect these precursors have had on the city's public spaces, and the hierarchies it established in a nuanced manner are made explicit. The culmination of this research process is the identification of outcomes associated with inclusivity. Findings are established across three significant themes—a) Understanding public space as social space, b) Components of inclusivity, and c) Values of inclusivity including accessibility, sense of place, conviviality and resilience. Key insights and guidance for inclusivity as a key constituent of social sustainability are the unique contribution.

Our aim was to determine the secondary antibody deficiency profiles of patients in a mesoregion of São Paulo state, Brazil, focusing on infectious diseases. Demographic characteristics, clinical and laboratory data were obtained from electronic files; infections were classified as organ-specific and graded as mild, moderate, life-threatening, and fatal. Non-Hodgkin lymphoma (NHL) accounted for 30% of patients, nephrotic syndrome (NS) 25%; chronic lymphocyte leukemia 20%, and multiple myeloma 15%. Patients with NS were younger than those in other groups, and hypo-γ-globulinemia was detected in 94.1%, IgG <400 mg/dL in 60.0%, IgA <40 mg/dL in 55.0%, and CD19 <20 cells/mm³ in 30.0%. One hundred and one infections were found; 82.1% were classified as mild or moderate, 7.9% as life-threatening, and 1.9% as fatal. Respiratory tract infections were more prevalent (41.5%), and pneumonia accounted for 19.8%. Lower levels of infections were found in patients with NS compared with NHL (P=0.0001). Most patients progressed to hypo-γ-globulinemia and secondary antibody deficiency after treatment with immunosuppressants, and mild and moderate infections were predominant. These therapies are increasing in patients with different diseases, therefore monitoring hypo-γ-globulinemia and infections may help to identify patients at high risk for severe complications, antibiotic prophylaxis or treatment, and immunoglobulin replacement

The main purpose of this study is the determination of the optimal data acquisition and processing parameters of electric and seismic tomographic techniques, for the investigation of complex geological environments. Two different study areas, in central-east Peloponnese and SW Attica were selected, where a detailed geological mapping and surface geophysical survey were carried out. The applied geophysical survey included the application of electrical resistivity tomography (ERT) and seismic refraction tomography (SRT). The geoelectrical measurements were acquired with different arrays and electrode configurations. Moreover, various types of seismic sources were used at seventeen shot locations along the seismic arrays. For the processing of geoelectrical data, clustered datasets were created increasing the depth of investigation and the discriminatory capability. The seismic data processing included: (a) creation of synthetic models and seismic records to determine the effectiveness and capabilities of the technique, (b) spectral analysis of the seismic records to determine the optimal seismic source type and (c) inversion of the field data to create representative subsurface velocity models. The results of the two techniques successfully delineated the complex subsurface structure that characterizes these two geological environments. The application of the ERT combined with the SRT, are the two dominant, high-resolution techniques for the elucidation of complex subsurface structures.

Background: Our study investigates the prevalence and causes of injuries among undergraduate dental students during clinical sessions. Methods: The study was conducted at the Department of Dentistry, National and Kapodistrian University of Athens, focusing on injuries reported from 2021 to 2024. Data were collected through self-reported questionnaires and clinical records. The primary variables assessed included the type of injury, the instrument involved, the clinical procedure being performed, and the immediate actions taken post-injury. Serological testing was conducted on both students and patients to assess the risk of bloodborne pathogen transmission. Results: The findings revealed a high prevalence of injuries, with needles being the most common cause, followed by burs and dental probes. The most frequent injury type was piercing, primarily affecting the fingers. Periodontal treatments, restorative procedures, and endodontic treatments were the main activities leading to injuries. Despite normal medical records for most patients treated by injured students, serological testing showed significant positivity rates for HCV and HBV. It is noteworthy that most injured students demonstrated their commitment to safety by adhering to recommended post-exposure protocols, including wound cleaning, disinfecting, and serological testing. Our study highlights the critical need for enhanced biosafety awareness and training among dental students to reduce injury risks. Conclusions: These findings underline the necessity for integrated safety protocols and continuous education to improve clinical practices and ensure student safety.

Waste cooking oil (WCO) recycled asphalt is facing issues regarding insufficient thermal oxidation stability and aging resistance. In this research, glycerol esterification was adopted to pretreat WCO, and the consequences of this treatment on the aging resistance and thermal stability of WCO were analyzed. The impacts of varying levels of esterification of WCO on the high-temperature, low-temperature performances, fatigue properties, as well as aging resistance of recycled asphalt were investigated. Furthermore, the mechanisms of regeneration and anti-aging of deeply esterified WCO recycled asphalt were revealed by Fourier transform infrared spectroscopy (FTIR) and gel permeation chromatography (GPC) tests. The results indicated that variations in the physical properties of WCO during the aging process were reduced, and its aging resistance was improved following glycerol esterification therapy. The initial thermal decomposition temperature was increased by approximately 115°C, which resulted in the enhancement of thermal stability significantly. Recycled asphalt obtained from deeply esterified WCO exhibited superior high-temperature, low-temperature performances and fatigue properties. Moreover, the thermal oxidation stability and aging resistance of recycled asphalt with deep-esterified WCO could be promoted by reducing the oxidation and volatilization of light components during the aging process.

Recent interest in intestinal hormones has risen with the idea that they modulate glucose tolerance and food intake through a variety of mechanisms, and such hormones like peptide YY (PYY), ghrelin, glucagon-like peptide (GLP)-1 and 2, and cholecystokinin (CKK) are therefore excellent therapeutic candidates for the treatment of diabetes and obesity. Furthermore, in the recent years, multiple studies suggest that the microbiota is critically important for normal host functions, while impaired host microbiota interactions contribute to the pathogenesis of numerous common metabolic disorders. In this study, we considered the nutraceutical effects of β-glucans added to pasta at the concentration of 6g\100g. Ten participants have been recruited and hematochemical analyses and intestinal hormones tests have been performed before and after 30 days of pasta intake. Stool specimens have been studied for Lactobacillus Fermentum, Lactobacillus acidophilus, Lactobacillus salivarius, Bifidobacterium longum, and Enterococcus faecium presence before and after 30 days of nutritional intervention. After 30 days of regular intake of pasta enriched by β-glucans results have been evaluated. In conclusion, pasta prepared from barley flour enriched with β-glucans at 6% exhibit promising responses on glucose metabolism, on intestinal hormones responses and on microbiota modification.

Objective: Mechanical bowel preparation is essential for the visualisation of the colon during colonoscopy, and previous studies have identified changes in gut microbiota composition after bowel preparation and colonoscopy. Considering the gut microbiota is increasingly implicated in mood, we aimed to explore the potential impact of this intervention on mood and the microbiota-gut-brain axis. Methods: We conducted a pre-post intervention study, with timepoints of one week before and one month after bowel preparation and colonoscopy, in community-dwelling adults referred for colonoscopy. Our primary outcome was change in average Hospital Anxiety and Depression Scale depression sub-scores using generalised estimating equations. We also examined changes in average anxiety, stress, and quality of life scores, and faecal microbiota composition and potential function using 16S rRNA sequencing. We further explored associations between changes in depressive symptoms and the gut microbiota and conducted post-hoc analyses to explore potential effect modifiers. Key Results: 59 participants were included in the analyses. Depressive symptoms decreased one-month post-procedure compared to baseline (adjusted β=−0.64; 95%CI: −1.18, −0.11). Irritable bowel syndrome (IBS) appeared to moderate this relationship (1.78; 0.292, 3.26); depressive symptoms increased in those with, and decreased in those without, IBS. Changes in gut microbiome composition included reduced alpha diversity, modest effects on beta-diversity, and increases in genera associated with potential health benefits, one-month post-procedure compared to baseline. Increases in the CLR-transformed abundance of Ruminococcaceae UCG-009 were associated with improvements in depressive symptoms. Conclusions: There is preliminary evidence of a potential mental health effect of bowel preparation and colonoscopy, which may be associated with changes to the gut microbiota. There may also be a differential mental health impact of this procedure for those with and without IBS. Considering the limitations of our study, further research is required to confirm these findings and their clinical relevance.

The high flammability and lack of charrability of polystyrene (PS) pose significant limitations on its broader applications. Therefore, there is an urgent need for a straightforward and efficient method for the synthesis of flame-retardant PS, which still poses a considerable challenge. In this study, we present an efficient approach to enhance the flame-retardant properties of PS through direct phosphorylating aromatic C(sp2)-H bonds using commercially available and inexpensive manganese catalyst. A range of phosphonates served as reactive substrates to enable a tunable degree of polymer functionalization. The corresponding phosphorylated PS specimens were determined by means of 1H NMR, 31P NMR, FTIR spectroscopy and GPC. Microscale combustion calorimetry (MCC) tests indicate that this protocol indeed enhances the flame-retardant performance of PS. Moreover, other advantages associated with the incorporation of the phosphonate group have been observed, including improved thermal resistance and wettability. This cost-effective strategy of Mn-catalyzed C-H can also be utilized to directly obtain phosphonate modification of waste foamed PS and styrene acrylonitrile copolymer, providing a new method for the purpose of recycling and upgrading PS plastics.

This Systematic Review examines studies focusing on tooth bleaching and its effect on healthy enamel or incipient caries and bacterial adhesion. The aim is to explore the impact of different bleaching agents on incipient caries lesions and healthy enamel. Randomized controlled trials, clinical trials, observational studies, and in vitro studies that compared at least two groups were included. A comprehensive search strategy was used to select studies from Pubmed and Scopus databases. Two evaluators performed data extraction, screening, and quality assessment independently. Only studies written in English were included. From 968 initial records, 28 studies were selected for a full-text evaluation. 7 studies were classified as cluster 1 (bacterial adherence on teeth), 12 studies as cluster 2 (no bacteria involved), 4 studies as cluster 3 (no teeth deployment), and 5 clinical studies were cluster 4. Of the selected studies, 6 (21.43%) supported increased bacterial attachment capacity and cariogenic dynamics, 4 (14.29%) decreased adhesion and cariogenic activity, 7 (25%) no difference, and 11 (39.28%) followed a differentiated methodological approach and could not be categorized. Due to different methodology strategies used in the studies of all clusters, the risk of bias was high. Thus, we cannot reach a confident conclusion.

Cytokine and AMH profiling were done in prepubertal Murrah buffalo heifers post-progesterone supplementation and co-synchronization protocol. Cytokines: IFNγ, IL6, IL1, IL13, TNFα, and TGFβ, and, AMH, Progesterone and Estrogen hormone estimations were done. Ovarian follicular pattern and fertility outcome were recorded. Eighteen prepubertal heifers, 15-17 months of age, 250-300 kg BWt were randomly divided into 3 groups, Group1: n=6, supplemented with altrenogest 0.044mg/kg/day/heifer orally for 14 days along with Co-synch programme; Group2: n=6, administered CIDR for 14 days and co-synch programme, Group3: n=6, received co-synch programme. Ultrasonography was done to ovarian follicle status on respective days of sampling. Pregnancy diagnosis was done around 45 and 60 post-AI. Estradiol 17-β level remained constant in altrenogest group, CIDR implanted and Control groups during the Progesterone treatment and Co-synch treatment. Estradiol levels during Co-synch were significantly less on day 9 of Co-synch (14.41 ± 1.97 pg/mL) than day 0 and on day7 in pre pubertal buffalo heifers in altrenogest group. However, no significance was observed in other groups. Progesterone levels in buffalo heifers subjected to synchronisation protocols varied significantly (P< 0.05) on day 7 of P4 treatment between altrenogest supplemented and CIDR implanted groups, as well as, Co-synch groups. Supplementation of altrenogest showed a significant (P= 0.043) increase in Progesterone levels by day 14 of altrenogest treatment. Progesterone varied significantly in all Groups on day 9 of co synch protocol [ Group 1 (P= 0.02), Group 2 (P= 0.041) and Group 3 (P= 0.007)]. Cytokine IFN-γ showed high correlation with progesterone, indicating the role of IFN-γ in puberty in buffalo heifers (r= 0.626, P< 0.01). AMH had a significant positive correlation supplemented with altrenogest with IFN-γ (r= 0.673, P< 0.01) and TGF-β (r= 0.463, P< 0.01), whereas, with TNF-α it was a negatively correlated (r= -0.34, P< 0.05). Based on Karl Pearson correlation coefficients, IL-13 and TGF-β could be considered as markers for puberty in buffalo heifers.

This paper investigates the energy dissipation level of a nonlinear vehicle suspension system. The suspension system is modelled as a mass-spring-damper system, which is designed using the output frequency response function (OFRF) method. This method enables the derivation of an explicit relationship, between the system output spectrum (or Performance metric) and the system nonlinear parameters of interest. The OFRF polynomial, of the energy dissipation level, was derived in terms of the nonlinear parameters of interest. The results obtained show that the OFRF model, of the energy dissipation level, could be used to estimate the amount of heat dissipated, for a set of design parameters. This has potentials of providing some insights, in the design of vibration-based energy harvesters, as some of the wasted heat energy could be converted to electrical energy.

Background: The pandemic caused by the SARS-CoV-2 virus demonstrated the importance of prevention through a healthy diet and lifestyle, the most vulnerable people being those with severe chronic conditions, those who are overweight, and those with an unbalanced immune system. Methods: The evaluation of the eating habits and lifestyle of the Romanian population in the post-pandemic period was carried out based on a cross-sectional observational study with the help of a questionnaire. Results: 4704 valid answers were registered (3136 female and 1568 male respondents). Among the respondents, most of them belong to the young population, 2892 between the ages of 18 and 40, i.e., 61.5%. Most male respondents are overweight (1400) and obese (780). Most respondents indicated a tendency to consume 1-2 meals per day irregularly (p=0.6167). Only 974 respondents adopted a healthy diet, and 578 a healthy lifestyle. Conclusion: The present study reports low adherence to a healthy diet (20.7%) and healthy lifestyle (12.28%), especially among the young population (&lt; 30 years). In the current context, it reports a reduced tendency to consume vegetables and fruits among the population, below the daily average recommended by the nutrition guidelines, a tendency towards sedentary behavior, and even deficient hydration of some of the respondents; these negative aspects can create a long term a series of nutritional and psycho-emotional imbalances. Our results evidence that complex surveys among the population are regularly required to investigate nutritional or lifestyle deficiencies; moreover, it could be helpful in further educational measures in nutrition, food, and environmental safety.

The number of physical devices connected to the Internet such as vehicles, household appliances and other "things" has been steadily increasing in recent years, thus forming the basis for the Internet of Things (IoT). IoT ecosystem extends beyond country borders and application domains, combining thousands of versatile devices that differ in terms of their structures, capabilities, and available resources. It is therefore not surprising that the landscape of wireless communication technologies and the degree of IoT devices available today is excessively broad and diverse. Interference between networks leads to frame collisions and consequent packet loss. Frame collisions occur when two or more packets overlap in time and frequency and use the same Long Range (LoRa) parameters, i.e. the same Spreading Factor (SF), Bandwidth (BW) and Carrier Frequency (CF). When most devices use the same configuration, collision probability is higher. The probability of frame collisions is also affected by traffic characteristics, particularly the periodicity of the transmission and the payload size. Larger payload sizes and more frequent transmissions accumulate with higher Time on Air (ToA) and channel occupancy [1]. Transmission powers and the location of the gateways also influences this situation. The aim of this experimental work is to verify the effects of collisions and interference in Long Range Wide Area Network (LoRaWAN), regarding the periodicity of transmissions and the payload sizes in a context of an inter-SF interference scenario. And to validate measuring tools like Received Signal Strength Indicator (RSSI), ToA and Packet Delivery Ratio (PDR) in the reliability of a network. We validate our conclusions by analyzing ToA according with RSSI and different data sizes, the RSSI for different SFs and different data sizes and finally the packet loss through the PDR for a better understanding of the reliability of packet transmission in our link. In the end we conclude that in an environment with inter-SF interference, the choice of SFs and packet lengths impacts ToA. When dealing with multiple devices near gateways, different SFs and varying packet lengths can lead to increased latency and longer ToA. Consequently, the risk of packet loss becomes more significant, especially if the signal-to-interference ratio (SIR) is low. This limitation will therefore affect scalability, particularly in Non-Line-Of-Sight (NLOS) scenarios.

Edvard Munch, a founder of Expressionism was pre-occupied with depicting his subjective experience and the most prolific painter of self-portraits since Rembrandt. Based on evidence that faces and self-related images are more salient than other objects it is plausible that self-portraits, in which the subject and object are the same, reflect the artist’s state of mind. Although he suffered from a variety of physical and psychological illness Munch was not diagnosed with any specificity in his lifetime. Posthumous diagnoses include schizophrenia, anxiety, bipolar and other disorders. Recent research has revealed altered visual perception in such patients. The present study empirically analysed three stylistic elements of Munch’s painted self-portraits and portraits: contrast, colour and fractal dimension and his painted productivity, to determine if variations correlate with critical life events and if so whether they indicate states of mind. It found significant increases in contrast and colour brightness and persistent high complexity during critical periods supporting the conclusion that Munch is diagnostically best described as suffering from early onset schizophrenia and comorbid social anxiety disorder.

Proper Post-Activation Performance Enhancement helps to improve athletic performance. This study aimed to investigate the effects of two different velocity loss (VL), 10%VL and 20%VL, on post-activation performance enhancement (PAPE) in 20m sprint performance among sprint athletes. Twenty-four male sprint athletes (100m sprint time: 10.96±0.15 s) were recruited. A randomized crossover experimental design was used for traditional group (TG), 10%VL, and 20%VL interventions. Sprint tests were conducted at the 4th, 8th, 12th, and 16th minutes after the intervention. Two-way repeated measures ANOVA revealed an interaction effect between group and time on 20m sprint performance (F=2.817, p=0.037, partial η²=0.585). Simple effect analyses showed significant differences compared to baseline at the 4th minute for the 20%VL group (P&lt;0.05). Cohen's d values indicated improvement in 10m sprint times at the 8th minute of the rest interval for all three intervention groups (TG: ES=-0.270, 10%VL: ES=-0.038, 20%VL: ES=-0.279). Improvement in 20m sprint times was observed at the 4th minute for the 20%VL group (ES=-0.296) and at the 16th minute for the 10%VL group (ES=-0.276). Compared to traditional PAPE schemes based on 1RM, PAPE schemes based on velocity loss (20%VL) can better induce PAPE effects in sprint athletes.

The exponential growth of the agricultural industry in the Amazon region has brought about notable economic advancements. However, this growth has substantially cost the region’s ecosystems, manifesting in increased deforestation and biodiversity degradation within the Amazon forest. This article is dedicated to assessing the eco-efficiency of agricultural production in Amazon biome municipalities. It places particular emphasis on identifying critical determinants through the utilization of the classic Data Envelopment Analysis (DEA) model for efficiency computation, super-efficiency models for distinctive characterization, bootstrap computational techniques for robust resampling, and the Malmquist index for calculating annual eco-efficiency indices of each Decision-Making Unit (DMU). An exploration of the correlation between efficiency and meteorological attributes of the municipalities is conducted. The findings of this study reveal several significant points: 1) Eco-efficient municipalities within the Amazon Biome can serve as benchmarks for other DMUs striving to attain optimal input-output levels. 2) Most municipalities in the Amazon Biome operate closely to the productive frontier due to the prevalent technology employed in their agricultural activities. 2) The nature of the technological frontier’s return suggests that small and large DMUs possess eco-efficiency potential. 4) The current dataset does not yield conclusive evidence regarding a direct correlation between the variables. Leveraging this information, strategic pathways can be formulated to drive economic development in tandem with the sustainability of Amazon Biome municipalities. These strategies promise to foster social, economic, and environmental benefits for the populace while providing valuable insights to inform future research within this thematic domain.

The assessment of existing bridges constitutes a serious challenge for the researchers since their safety evaluation is a complex task due to several sources of uncertainty affecting the parameters identified in the knowledge process. In particular, a high level of uncertainties may arise in the case of prestressing systems requiring special investigation strategies and experimental technologies. The paper aims to investigate how the knowledge uncertainties influence the safety assessment of existing post-tensioned bridges. The semi-probabilistic approach is used, and uncertainties related to the knowledge process are described considering the number of tests, the confidence level assumed for the estimation of the problem parameters, and the measurement errors of in-situ tests. Results concerning a typical post-tensioned bridge are reported and the variability of the outcomes is discussed and compared with a reference case of “perfect knowledge”. The main results of the study confirm the general robustness of the semi-probabilistic Eurocodes safety format and provide an overview of dispersion due to different choices about the number of tests and confidence level. The measurement errors may lead to significant under-estimation of the computed structural capacity with respect to the reference one.

Fragile X syndrome (FXS) is a genetic disorder caused by a mutation in the fragile X messenger ribonucleoprotein 1 (FMR1) gene and known to be a leading cause of inherited intellectual disability globally. It results in a range of intellectual, developmental, and behavioral problems. Fragile X premutation associated conditions (FXPAC), also caused by a smaller CGG expansion (55 to 200 CGG repeats) in the FMR1 gene, is linked to other conditions that increase morbidity and mortality for affected persons. Limited research has been conducted on the burden, characteristics, diagnosis, and management of these conditions in Africa. This comprehensive review provides an overview of the current literature on FXS and FXPAC in Africa, epidemiology, clinical features and challenges faced, such as discrimination against affected persons, limited awareness and research, poor access to resources and genetic services and treatment. It further provides an in-depth analysis of the existing worldwide data for the diagnosis and treatment of these disorders. This review will improve understanding of FXS and FXPAC in Africa by incorporating existing knowledge, identifying research gaps, and potential topics for future research to enhance the well-being of individuals and families affected by FXS and FXPAC in the region.

The objective of this work is to analyze the improvement of heat transfer in trapezoidal fin heat exchangers using numerical simulation. Heat exchangers are essential components frequently used in contemporary electronic gadgets to effectively disperse heat produced by high-power components. Nevertheless, as electronic devices continue to advance and become more powerful, the heat transfer capacity of heat exchangers is facing more requirements, therefore requiring enhanced heat dissipation efficiency. Afterwards, various fin angles were adjusted, and the heat transmission efficiency was compared. Modifying the angles can significantly improve the effi-ciency of convective heat dissipation. Moreover, it has been found that employing an optimized trapezoidal fin structure can further enhance the efficiency of heat transfer. The results indicate that trapezoidal fin heat exchangers provide superior heat dissipation efficiency compared to conventional heat exchangers. This is important for enhancing the thermal dissipation capabili-ties of electrical gadgets, hence guaranteeing steady functionality and extending their longevity. Subsequent study might explore supplementary methods to boost heat transmission in different heat exchanger configurations in order to meet the growing requirements for heat dissipation.

Background: This study aimed to evaluate the burden and impact of cardiac and cerebrovascular disease (CCD) on hospital inpatients with type 1 diabetes mellitus (T1DM). Methods: This is a retrospective nationwide cohort study of people with T1DM with or without CCD in the US National Inpatient Sample between 2016 to 2019. The in-hospital mortality rates, length of stay (LoS) and healthcare costs were determined. Results: A total of 59,860 T1DM patients had a primary diagnosis of CCD and 1,382,934 did not. The median LoS was longer for patients with CCD compared to no CCD (4.6 vs. 3 days). Patients with T1DM and CCD had greater in-hospital mortality compared to those without CCD (4.1% vs. 1.1%, p&lt;0.001). The estimated total care cost for all patients with T1DM with CCD was approximately US $326 million. The adjusted odds of mortality compared to patients with non-CCD admission was greatest for intracranial hemorrhage (OR 17.37, 95%CI 12.68-23.79), pulmonary embolism (OR 4.39, 95%CI 2.70-7.13), endocarditis (OR 3.46, 95%CI 1.22-9.84), acute myocardial infarction (OR 2.31, 95%CI 1.92-2.77) and stroke (OR 1.47, 95%CI 1.04-2.09). Conclusions: The burden of CCD in patients with T1DM is substantial and significantly associated with increased hospital mortality and high healthcare expenditures.

In this follow-up study, we aimed to assess the effectiveness of the “I do not smoke, I exercise”, anti-smoking preventive health education program. The program was based on the Theory of Planned Behavior supplemented with life-skills teaching and targeted at high school students. The intervention comprised ten one-hour online sessions, administered by physical education instructors. The study cohort comprised 222 students (109 boys, 113 girls) from 11 secondary schools, with an average age of 16.42 ± 1.36 years. Data collection involved pre- and post-intervention self-assessment questionnaires. The examined variables included attitudes towards smoking, intention to smoke, subjective norm, perceived behavioral control (PBC), knowledge about smoking, smoking behavior, exercise behavior, attitudes toward the program's implementation, and satisfaction with the program. Separate paired samples t-test revealed a significant improvement in students' knowledge about smoking, perceived behavioral control, and overall program satisfaction following the intervention. However, no significant changes were observed in the remaining variables. These findings suggest that the health education smoking prevention intervention incorporates techniques and strategies that influence the Perceived Behavioral Control variable, emphasizing students' strong interest in educationally theorized programs integrating technology into their design. Future studies should consider further examination of tobacco control strategies within the high school context.

The paper presents the prediction of hydrodynamic characteristics of different rudder -plane configurations behind a submarine in deep water through the Reynolds-Averaged Navier-Stokes method in Ansys Fluent Solver. The hydrodynamic force and moment acting on the Cross-plane, X-plane, and Y-plane rudder configurations are analyzed for estimating hydrodynamic coefficientsfor predicting the advantages of each configuration to control the ship. The obtained results show that X-force of the X-plane rudder configuration is larger than the force acting on the Cross-plane rudder and Y-plane rudder configurations. However, Y-force, and Z-force of the X-plane rudder configuration are significantly greater than the Y-force of the left configurations. The same tendency can be seen in the moment of the X-plane rudder about the y-axis and z-axis. The roll moment induced by the Y-plane and Cross-plane rudder configurations is significantly larger than the case of the X-plane rudder configuration.

Lithium is the superior first-line treatment for bipolar disorder (BD). Yet the percentage of patients receiving lithium is abysmally low, especially in the USA. Since psychiatrists have failed to place lithium in its appropriate role, we make the case that patients with BD themselves need to be better educated about the unique characteristics and preeminence of the drug so that it can be used more often and appropriately. Lithium has a highly unfavorable popular reputation among would-be patients and many psychiatrists. Thus, a direct appeal to patients with BD appears appropriate to try to remediate this situation. The unique assets of lithium are underappreciated or not well known. Conversely, the side effects profile of lithium are overestimated. Here, we make the case that lithium’s image needs to be revised not only with better and more accurate information but with a wholesale re-naming and rebranding of the drug. We will not only outline the unique qualities and new information about the side effects of the drug but attempt to change some of the terminology conventionally used to refer to lithium so that its use may be appropriately applied earlier and at an increased frequency for patients with BD.

The COVID-19 pandemic has triggered seismic shifts in how we work, and organizations behave. It has caused many organizations to transition from an office-centric culture to more flexible ways of working. This shift is necessitated by health conditions and the need for controls. It is also driven by the assumption that remote work or working from home offer a certain assurance of safety for employees against the threat of infection in highly vulnerable office conditions. The shift to remote work has so far been mainly experimental as most businesses continue to learn about what works and what doesn’t. There is also the assumption that all that matters for the efficient operability of a remote work regime is the availability and effectiveness of computing technologies and internet connectivity. Thus, once those supplies are in place remote work is expected to be fully functional and without problems. As learning continues about what works and what doesn’t, it has also become increasingly clear that beyond the threat of covid-19 and the relative safety that individual homes may offer, there are other vulnerabilities which are ignored or underestimated in the process. In most instances, the home environment of the employee, the conditions under which employees operate from home and the health and safety such environments provide (or not) are either ignored or underestimated in discussions around remote work practices. This paper highlights remote work as an emergent practice while exploring associated, but ignored, health and safety issues in employee homes.

There is no doubt that seagrass beds constitute one of the most productive ecosystems in shallow coastal waters. Despite this, picoplankton in seagrass ecosystems has received relatively little attention. The purpose of this study was to compare picoplankton growth and mortality rates between seagrass and unvegetated habitats using chamber incubations. We tested two main hypotheses: (i) incubation with seagrass would result in higher bacterial growth rates due to increased DOM release from seagrass photosynthesis, and (ii) Synechococcus spp. would be lower in the presence of seagrass due to competition for inorganic nutrients. Our results showed bacterial growth rates of 2.31 and 2.44 d–1 without and with seagrass, respectively. In seagrass chambers, bacterial growth was higher than that in non-seagrass chambers, suggesting that organic carbon coming from the seagrass community may support bacterial production. Furthermore, we observed a negative Synechococcus spp. growth rate (-0.9 d–1) in the seagrass treatment, likely reflecting nutrient competition with the seagrass. Small-scale chambers proved to be a useful tool for studying the factors controlling spatial and temporal patterns of picoplankton across different habitats. Furthermore, future studies should examine picoplankton growth over a wider range of spatial scales in seagrass beds and adjacent unvegetated sediment.

The scratch test consists in pushing a tool across the surface of a material at a given penetration depth or applied load. It has several applications in Science and Engineering including strength testing, damage and quality control of thin films and coatings. Despite numerous attempts in scientific literature, the application of scratch test to characterizations of fracture properties remains a heavily controversial topic. Therefore, this investigation arises as an experimental study in order to assess the fracture toughness using scratch test. A study on the effect of cryogenic treatment, performed after tempering, on fracture toughness, via scratch test experiments, of different tool steels has been made. A laboratory investigation on AISI D2, AISI M2 and X105CrCoMo18 steel confirms the possibility of increasing the fracture toughness by carrying out the cryogenic treatment after the usual heat treatment

The incremental sheet forming represents a relatively recent technology that guarantees high customization, thanks to the layered manufacturing principle typical of rapid prototyping, and cost-effectiveness, because it does not require dedicated equipment. Research has initially shown that this process is effective in metal materials capable of withstanding plastic deformation but, in recent years, the interest in this technique has been increasing for the manufacture of complex polymer sheet components as an alternative to the conventional technologies, based on heating-shaping-cooling manufacturing routes. Conversely, incremental formed polymer sheets can suffer from some peculiar defects, for example twisting. To reduce the risk of this phenomenon and the occurrence of failures, a viable way is to choose toolpath strategies that make the tool/sheet contact conditions less severe, and this represents the main goal of the present research. Polycarbonate sheets were worked by incremental forming; in detail, cone frusta with a fixed wall angle were manufactured with a reference and a stair toolpath strategy, and both the forming forces and the twist angle were monitored. The analysis of the results highlighted that a stair toolpath involving an alternation of diagonal up and vertical down steps represents a useful strategy to mitigate the forming forces and, with them, the occurrence of the twisting phenomenon in incremental formed thermoplastic sheets.

Histones are keys to many epigenetic events and their complexes have therapeutic and diagnostic importance. The determination of the structures of histone complexes is fundamental in the design of new drugs. Computational molecular docking is widely used for the prediction of target-ligand complexes. Large, linear peptides like the tail regions of histones are challenging ligands for docking due to their large conformational flexibility, extensive hydration, and weak interactions with the shallow binding pockets of their reader proteins. Thus, fast docking methods often fail to produce complex structures of such peptide ligands at a level appropriate for drug design. To answer this challenge, and improve the structural quality of the docked complexes, post-docking refinement has been applied using various molecular dynamics (MD) approaches. However, a final consensus has not been reached on the desired MD refinement protocol. In the present study, MD refinement strategies were systematically explored on a set of problematic complexes of histone peptide ligands with relatively large errors in their docked geometries. Six protocols were compared that differ in their MD simulation parameters. In all cases, pre-MD hydration of the complex interface regions was applied to avoid the unwanted presence of empty cavities. The best-performing protocol achieved a median of 32 % improvement over the docked structures in terms of the change of root mean squared deviations from the experimental references. The influence of structural factors and explicit hydration on the performance of post-docking MD refinements was also discussed to help their implementation in future methods and applications.

Sustainable manufacturing practices are becoming increasingly necessary due to the growing concerns regarding climate change and resource scarcity. Consequently, material recycling technologies have gradually become preferred over conventional processes. This study aimed to recycle waste polylactic acid (PLA) from household-disposed cups and lids to create 3D-printed parts and promote sustainable manufacturing practices. To achieve this, the current study utilised virgin and post-consumer PLA (sourced from household waste) blends. The PC-PLA wastes were shredded and sorted by size with the aid of a washing step, resulting in a filament with a 1.70 ± 0.5 mm diameter without fragmentation or dissolution. A 50:50 wt.% blend of virgin PLA (vPLA) and PC-PLA was selected as the standard recycling percentage based on previous research and resource conservation goals. The study investigated the impact of three 3D printing parameters (layer height (LH), infill density (I), and nozzle temperature (NT))on the quality of 3D-printed parts using a three-level L9 Taguchi orthogonal array. The findings revealed that blending PC-PLA with vPLA led to significant improvements in the tensile, flexural, and impact strengths by 18.40%, 8%, and 9.15%, respectively, compared to those of recycled PLA. This conclusion was supported by the investigation of the fracture surface area, which revealed fractographic features associated with printing parameters, such as plastic deformation and interfilament debonding. An ANOVA analysis revealed a positive influence of larger layer height and high nozzle temperature on the mechanical properties. Subsequently, the optimal printing parameters (LH: 0.3 mm, I: 100%, and NT: 215 °C) were determined using the S/N ratio, and a confirmation test using the optimum printing parameters exhibited a strong correlation with statistically predicted outcomes. Finally, the study used optimum printing parameters to fabricate 100% post-consumer recycled PLA 3D printed parts, demonstrating their potential for low-strength applications. Based on these findings, it can be concluded that virgin and post-consumer recycled PLA blended filament for fabricating 3D printed components is an effective way to support plastic recycling in the context of a circular economy.

This study explored differences in student-athletes’ symptoms of depression, anxiety, and stress pre- to post-COVID-19 pandemic. The WHO reported a 25% increase in depression and anxiety rates worldwide with young people disproportionately affected. Student-athletes face many stressors related to their sporting and academic feats but what is not known is how the COVID-19 pandemic affected their experiences of mental illness. A multiple cohort cross-sectional study design was employed, and data collected using physical and online surveys. Participants (M age = 19.98 years, SD = 1.50) were recruited from UK universities (N = 807; 427 pre-pandemic cohort, 380 post-pandemic cohort). Results revealed statistically significant differences in mean depression, anxiety, and stress scores between cohorts. Scores for the post-pandemic cohort were significantly higher than pre-pandemic, suggesting a worsening of symptom severity. Distributions of student-athletes across categories of symptom severity also worsened for depressive and anxiety symptoms post-pandemic and were skewed towards more severe categories. Symptoms of de-pression, anxiety, and stress were a concern pre-pandemic. Rates are higher in the post-pandemic cohort, suggesting a worsening of symptoms. This data adds to evidence on student-athletes’ symptoms of mental illness by exploring a UK sample and comparing scores pre- and post-pandemic.

The article presents the results of research work devoted to the study of composite materials on polymer binder with the content of modified mineral filler - water-dispersion paint and varnish materials on acrylic polymer with modified filler - diatomite. The aim of the study is to obtain polymer-based composites with modified diatomite (water-dispersion paint on acrylic binder) with improved performance properties. Methods: determination of porosity, adhesion, elasticity, hiding power of the control composition; determination of porosity, adhesion, elasticity, hiding power of the obtained composites with the use of modified filler; investigation of the influence of radiation in the infrared radiation (IR) region of the spectrum of the paint coating surface using FLIRB620 thermal imager. As a result of work it is noticed that modification of water dispersions by silica activated diatomite promotes elimination of the main disadvantages of materials and coatings on the basis of acrylate binder - low water resistance and low physical and mechanical characteristics, introduction of modified diatomite into water emulsion paint on acrylate basis does not lead to deterioration of the main operational characteristics of paint and varnish coatings - porosity, adhesion, elasticity and covering. When analyzing the effect of emissivity in the IR region of the spectrum of the paint coating surface, a significant effect of the quantitative content of modified diatomite on the reduction of emissivity of paint coatings in the IR region of the spectrum was established and it was shown that a significant effect of the reduction of emissivity of paint coatings in the IR region of the spectrum is provided by the introduction of modified diatomite in the amount of 40 wt.h. into the mixture. The influence of the time of full-scale tests in the investigated small range regardless of the quantitative composition of modified diatomite on the performance characteristics of the paintwork was established.

This study sought to investigate the problem of losses along the milk value chain in Nandi and Kakamega Counties in Kenya. Using semi structured questionnaire, quantitative data were collected from different stages of the value chain consisting of 400 dairy farmers proportionally and randomly selected in Chesumei and Ikolomani sub counties; 15 cooperatives, 40 transporters, 20 milk bars, 17 supermarkets. Additionally Key informant interviews and focus group discussions we held with extension staff and farmers, respectively.The results showed losses occurred at all stages of the value chain in Nandi and Kakamega Counties with the highest losses at Cooperative (50.6%), collection centres (33.7%) and milk bars (7.5%). Annual milk loss was estimated to be 260,000 litres and 20,000 litres in Nandi and Kakamega counties respectively. The economic value of losses per year was estimated at KES 13 million (USD 100 000). Significant factors (P<0.001) influencing milk losses at farm level were: type of cow housing, level of training of milker, mixing morning and evening milk and Lack of cooling facilities. In cooperatives, poor roads, poor preservation of milk and mastitis influenced post harvest losses (PHL) causing milk rejection due to spoilages; while transporters attributed PHL to storage during transportation. Inadequate storage facilities and milk handling practices influenced PHL in milk bars while supermarkets attributed PHL to poor packaging materials and short shelf life. The most important causes of milk PHL along the chain were spoilages, spillages, adulteration and physical dirt. Key interventions to minimize PHL should target improvement of rural road infrastructure connecting farmers to markets; milk storage facilities and capacity building on milk handling practices for all actors. A sustainable PHL reduction should entail policy dialogue on milk payment system based on quality rather than quantity.

Background: To compare photodynamic therapy 41 and the use of probiotics in reducing halitosis assessed through gas chromatography and microbiome analysis. Methods: Participants aged from 18 to 25 years, showing sulfide (SH2) ≥ 112 ppb on gas chromatography, were selected. They were divided into 4 treatment groups: Group 1 - Tongue Scraping; Group 2- Antimicrobial Photodynamic Therapy (aPDT); Group 3- Probiotics; Group 4- Antimicrobial Photodynamic Therapy (aPDT) and Probiotics. The halimetry process was performed before, immediately after the treatments, 7 days, 14 days and 30 days after the initial collection. The collections for later microbiological analysis were made along with the halimetry, for the microbiome analysis. Results: Treatment with aPDT or probiotics under these experimental conditions was not able to change the bacteria present in the biofilm of the tongue. Conclusions: More research is needed to know the behavior of the oral microbiome in the presence of halitosis and the effectiveness of new treatments.

Benveniste’s experiments – known in the lay press as the “water memory” phenomenon – are generally considered to be a closed case. However, the amount of data generated by twenty years of well-conducted experiments prevents closing the file so simply. An issue, which has been little highlighted so far, merits to be emphasized. Indeed, if Benveniste failed to persuade his peers of the value of his experiments, it was mainly because of a stumbling block, namely the difficulty of convincingly proving the causal relationship between the supposed cause (“informed water”) and the experimental outcomes in different biological models. To progress in the understanding of this phenomenon, we abandon the idea of any role of water in these experiments (“water memory” and its avatars). In other words, we assume that “control” and “test” conditions to be evaluated were physically identical and differed only by their respective designations. We show in this article how simple probabilistic considerations allow to build a model that accounts for all aspects of Benveniste’s experiments. In this model based on probability amplitudes, constructive and destructive interferences emerge – or not – according to the experimental context. The recording of a statistical regularity shapes the intertwined whole constituted by the probability amplitudes of the states of the experimenter’s cognitive structures and of the experimental system. This model provides an alternative explanation to Benveniste’s experiments where water plays no role and where the place of the experimenter is central.

With increasing numbers of older adults worldwide, multimorbidity and polypharmacy are on the rise, highlighting the risks of harmful drug-drug interactions (DDIs) to patients. As cardiovascular agents are among the most prescribed medications, we performed an observational cross-sectional study to determine the prevalence of DDIs in a cardiology department of a secondary hospital. Patient data was obtained from medical records and screened for DDIs using the Micromedex drug interaction software. Descriptive statistics, Chi-square (χ2) test, Student's t test and Pearson's correlation test were used to analyse the results. Out of 50 participants, 45 (90%) had at least one DDI. A total of 266 DDIs were identified, with more than half classified as major. At least one major DDI was found in 78% of patients. 42% of patients were at an increased risk of bleeding due to DDIs. A statistically significant relationship was found between the detection of DDIs and both patient age (p = 0.005) and the number of drugs used (p &lt; 0.001). Our findings pose questions about the wider prevalence and risks of drug-drug interactions among patients with cardiovascular disease.

CPPU (Forchlorfenuron (1-(2-chloropyridin-4-yl)-3-phenylurea), a synthetic cytokinin, is extensively used to enhance fruit size and quality size in several crops, including kiwifruit. This study examines the effects of three different CPPU application strategies on two different crop loads on the main fruit quality parameters. Our results show that a two application of CPPU significantly increased fruit weight, especially under standard crop load conditions, due to better resource allocation. Fruit firmness improved with 2 and 3-times CPPU applications, likely due to enhanced cell wall development, and was consistently affected by crop load, with higher loads resulting in softer fruits. CPPU applied twice did not significantly influence soluble solids content. This parameter was instead significantly influenced by the crop load, with standard load fruit showing higher sugar accumulation. Fruit dry weight showed similar trends, with CPPU having a more pronounced effect under standard crop loads. Overall, CPPU proved to be a cost-effective strategy to enhance fruit quality, particularly in orchards with standard crop loads, by balancing yield and sugar content.

The supply chain has incorporated products by putting them into hair scarfs. This study introduces the use of mini chips in health and beauty products and can reduce fatigue through enhanced sleep patterns. The mini chip could be placed in the scarf and used as a prototype. RFID technology provides the supply chain with specific information that is used to identify products and make communication easier. (Muhammad, et. al. 2013) This paper presents a new tool herein referred to as a scarf prototype which is developed to analyse EMG (electromyogram), ECG (electrocardiography), EEG (electroencephalogram), and EOG (electro-oculogram) signals that focuses in the area of sleep disorders. The mini chips used can be used to determine a solution for sleep disruption by using automated analytics. This could lead to improvement in our understanding of sleep disruption and overall sleep physiology. Automated technology allows repeated measurements, evaluation of sleep patterns, and provide suggestions to improve a person’s quality of sleep. This analysis compares the use of polysomnography and the scarf prototype. The analytics provide models and shows correlation between variables, such as EMG, ECG, EEG, and EOG. This study shows that the results from the scarf prototype is just as reliable as the original method, polysomnography.

A set of polymer composite bolted T-joints with novel configuration consisting of internal skeleton and external skin was fabricated using a prepreg-RTM co-curing molding process. Experiments were conducted to study their mechanical properties under bending load. A finite element model with a polymer resin area between the skin and skeleton was established and verified by the experimental results. Then, the damage propagation process and failure mechanism of the joint and the influence of three factors related to the layer characteristics of the skin and skeleton were investigated by the validated models. The results show that the bending stiffness and the yield limit load of the novel composite T-joint are 0.81 times and 1.65 times that of the 2A12 aluminum T-joint respectively, while at only 55.4% of its weight. The damage of the joint initiates within the resin area and leads to a degradation of the joint bending performances. The preferred stacking sequence of the skeleton is [0/+45/90/-45]ns when primarily subjected to bending loads. The decrease in bending performances is within 5% with the inclining angle of the skeleton less than 12 degrees. The more layers of 90° in the skin, the better bending performances of the joints, while the more layer of 0°, the poorer bending performances.

Post-industrial recycling (PIR) and post-consumer recycling (PCR) are measures to sustain re-sources by improving materials’ circularity and sustainability. Currently, circularity is mostly measured as the degree of reutilization of a material from 0 to 100 % at product or company lev-el. This lacks in assessing the resources’ usage over multiple product life cycles. Therefore, we propose to assess circularity as (i) the frequency resources are used in products (effective circu-larity eC) and (ii) a vehicle to reduce virgin resource use and environmental impacts (environ-mentally efficient circularity eeC). Besides, to compare the environmental impacts of using recy-cled materials from PIR or PCR, we analyse their impact reduction potential (IRP) indicating the environmental benefits of recycling in relation to virgin material put onto the market. We demonstrate the suggested indicators for a case study material: polypropylene. For this polymer type, the eC ranges between 0.93 and 9.08 uses of the resource on average depending on collec-tion, sorting, and recycling rates. Likewise, the eeC ranges between 0.31 and 1.50 uses per kg of CO2 equivalents emitted. PCR has a higher IRP regarding climate change impacts than PIR in all analysed scenarios. The results reveal the relevance of PCR and PIR beyond the product life cycle.

The period of the COVID-19 pandemic resulted in a rapid development of innovative education methods, in particular using e-learning and remote work tools. The effects of this development are also post-pandemic changes in formal teaching regulations, in particular in higher education, allowing classes and lectures to be carried out with Blended Learning or Flipped Classroom methods. This paper provides information about a case study of implementing ICT technologies with elements of the mentioned methods in one of the subjects at a technical university. The implemented tools and solutions in the field of e-learning and interactivity are presented, along with information regarding their perception by students during two academic years in the post-COVID-19 period. The analysis of results of these information and student evaluations indicates their generally positive approach to such innovations in the educational path, and at the same time shows significant challenges for teachers to increase the attractiveness and effectiveness of the teaching process and the development of practical, technical skills of students.

ABSTRACT After locavore was chosen as “the best word of the year” in 2007, its popularity increased gradually. Today great number of locavores consciously prefer locally produced food for the benefit of themselves and their community. Undoubtedly this conscious movement has its consequences in marketing discipline. Accordingly, this paper is purposed to examine the how locavore perceptions affect loyalty towards retailers that sell locally produced food. In this context, a survey was applied to people residing in Istanbul and Kocaeli districts to measure the robustness of these effects. Furthermore, attitude towards locavore is used as a control variable to reveal to what extend locavorism affects these proposed connections. According to results, for participants with low attitude, Social Responsibility and Health Consciousness variables have significant effect on local retailer shopping loyalty. However, for participants with high attitude, all independent variables proved to have substantial effect on local retailer shopping loyalty. As the first empirical study in Turkey on the subject, this paper will provide important insight to academia and practicioners due to today’s ever-increasing consciousness in green marketing.

Brazilian garimpeiros are a highly hard-to-reach and mobile population, with little access to basic hygiene and health services, and have been crossing the border to work irregularly in gold mines in French Guiana since the 90s. This study aimed to characterize this population and identify their main health problems. A cross-sectional study was carried out in the municipality of Oiapoque-AP, with two surveys: before (2018) and after (2019) the implementation of Malakit. Individuals were recruited from resting places and submitted to a questionnaire with demographic variables, history and knowledge of malaria, and health issues in the mines. Simultaneously, a clinical evaluation was performed. The garimpeiros were mainly men from Maranhão, Pará, and Amapá, with a low educational level and worked on average for 10 years in the mining sites. The study population mentioned numerous health problems: malaria, followed by leishmaniasis, flu, body aches, headaches, and digestive problems. Other diseases mentioned were skin diseases, bat bites, hepatitis, and HIV infection. This vulnerable population is constantly subjected to heavy routines and exposed to different diseases and infections that can spread across borders. Knowledge of this is essential for developing public health policies that can be integrated into specific epidemiological situations.

The nonlinear dynamics exhibited by aircraft flying at high angle of attack (AOA) pose great challenges to the design of flight control. The control design based on nonlinear dynamic inversion (NDI) is to reversely find the required control input based on the current nonlinear dynamics of the aircraft and the control objectives to be achieved. Since it is derived from the nonlinear dynamics of the aircraft, a single NDI controller can cover the entire flight envelope without the need for controller switching or gain scheduling. This paper employs the layered structure of the flight control loop to implement the NDI controller through the combination of aerodynamic control and thrust vectoring control (TVC). The resulting NDI controller is applied to an experimental F-16 installed with TVC to verify its high AOA maneuverability in the post-stall region. The verification simulation shows that the experimental F-16 under the NDI control can effectively track the high AOA command and successfully demonstrate the Herbst maneuver by performing the heading reversal with 70° AOA.

The research presented in the article is devoted to the study of the influence of phase compounds on the friability of the Fe-Si-Mn-Al complex alloy. The urgency of the problem lies in the development of technology for producing a non-scatterable alloy from manganese-containing ores and high-ash coals. The main goal of the work is to determine the range of alloy compositions and the resulting phases that affect the dispersibility of the alloy, which is critically important for its industrial implementation. Research methods include thermodynamic diagram analysis (TDA) using data on the standard enthalpy of formation of intermetallic compounds, as well as experimental tests in an ore-thermal electric furnace with a capacity of 200 kV*A. The results show that Fe-Si-Mn-Al complex alloys form a variety of silicide and aluminide phases, including intermetallic compounds and ternary systems, which is critical for understanding and controlling their physicochemical properties. When smelting a complex alloy, the content of leboite (Fe3Si7) in the Fe-Si-Mn-Al system plays a significant role. The development of smelting technology will be aimed at avoiding the FeSi2-Fe3Si7-F2(FeAl3Si2)-Mn11Si19 tetrahedron area. This approach to controlling the composition of a complex alloy is critical to ensuring its consistent friability properties in industrial applications. Thus, this work represents an important step in understanding the physical properties and stability of Fe-Si-Mn-Al complex alloys, which have potential for widespread use in metallurgical and other industrial applications.

This research delves into the water hammer occurrences, in the transmission pipeline of the SMD (Manda Daba) Multi Village Water Supply Schemes in Afar, Ethiopia. It utilizes simulation software, Bentley HAMMER version 8i to assess transient flow issues and the effectiveness of protective measures. The study pinpoints high risk areas in Scenario 1 marked by pressure spikes, negative pressures and frequent cavitation highlighting the importance of efforts. Prior to safeguards significant pressures reaching 288.27 m H₂O and minimum pressures dropping as low as 9.98 m H₂O are observed. In Scenario 2 where protective measures are implemented notable enhancements are seen with pressures ranging from 121.38 m H₂O to 150.49 m H₂O improved safety levels and substantial reductions in minimum pressures at pump stations. Moreover the study delves into Scenario 3 which explores pipe materials and diameters to provide insights, for pipeline design standards. It emphasizes how protective measures effectively mitigate water hammer effects while also highlighting cost saving potential by incorporating 2000 liter hydro tanks at pump stations. This integration leads to decreased pipeline collapses and maintenance expenses underscoring the significance of addressing challenges pinpointing failure causes and offering solutions to enhance system performance and strengthen reliability within the SMD water supply system

Post-ovulatory aging (POA) is an inevitable factor during some assisted reproduction technology procedures, and results in poor fertilization rates and impaired embryo development. This study used RNA sequencing analysis and experimental validation to study the similarities and differences between in vivo- and in vitro-matured porcine oocytes before and after POA. Differentially expressed genes (DEGs) between fresh in vivo-matured oocyte (F_vivo) and aged in vivo-matured oocyte(A_vivo) and DEGs between fresh in vitro-matured oocyte (F_vitro) and aged in vitro-matured oocyte(A_vitro) were intersected to explore the co-effects of POA. It was found that "organelles", especially "mitochondria", were significantly enriched GO terms. The expression of genes related to the “electron transport chain” and “cell redox homeostasis” pathways related to mitochondrial function significantly showed low expression patterns in both A_vivo and A_vitro groups. WGCNA analysis to explore gene expression modules specific to A_vivo. Trait-modules association analysis showed that the red modules were most associated with in vivo aging. There are a total of 959 genes in the red module, which are mainly enriched in “RNA binding”, “mRNA metabolic process”, etc. GO terms, and “spliceosome” and “nucleotide excision repair” pathways. DNAJC7, IK, and DDX18 were at the hub of the gene regulatory network. And these genes were all expressed higher in A_vivo. In summary, POA affects the organelle function of oocytes. A_vivo oocytes have some unique gene expression patterns. These genes may be potential anti-aging targets. This study helps us understand the detailed mechanism of POA and provides strategies for researching oocyte aging.

Measurement of Globe temperature is essential for investigating thermal comfort in street canyon. Globe thermometer is the most common instrument used to measure globe temperature (GT), however its application in scale models is still uncertain and not thoroughly investigated as of today. Therefore, this study is explicitly conducted to investigate globe thermometer measurements and proposed an improvised customization of the globe thermometer size to enhance reliability in scale models. The experiments were carried out outdoors using a typical street canyon model (scale 1:100) with East-West street orientation. The experiment presented a comparison between a low solar reflective street canyon (albedo of 0.4) and a high solar reflective canyon (albedo of 0.6) in terms of surface temperatures, heat flux and globe temperature. Furthermore, this study also investigated the influence of solar orientation on the globe temperature using both experimental using scale models and microclimatic modelling using ENVI-met. It is observed that although the surface temperatures are lower with high solar reflective canyon compared to that with low solar reflective canyon, GT is higher in high reflective canyon during daytime, which could be due to combined effect of direct radiation and shortwave reflection. However, for hours after the sun set, GT becomes lower (up to 1°C) in the case of high reflective canyon compared to low reflective canyon.