Yttria stabilized zirconia (Y-TZP) ceramics with drastically reduced yttria content have been introduced by different manufacturers aiming at improving the damage tolerance of ceramic components. In this study an alumina doped 1.5Y-TZP was axially pressed, pressureless sintered in air at 1250–1400 °C for 2 h and characterized with respect to mechanical properties, microstructure and phase composition. The material exhibits a combination of high strength of 1000 MPa and a high toughness of 8.5–10 MPa√m. The measured fracture toughness is, however, extremely depending on measurement protocol. Direct crack length measurements overestimate toughness due to trapping effects. The initially purely tetragonal material has a high transformability of > 80 %, the transformation behavior is predominantly dilatoric, measured R-curve related toughness increments are in good agreement with transformation toughness increments derived from XRD data.

Yttria stabilized zirconia materials are frequently used in mechanical engineering and biomedical applications. Demanding loading conditions require materials combining a high level of strength and fracture toughness. A ready to press alumina doped 2 mol% yttria stabilized zirconia powder was shaped by axial pressing and sintering in air at 1250 - 1500 °C for 2 h. The best combination of strength and toughness value of 7.8 MPa√m. Materials sintered in the middle of the chosen temperature range combine fully density, high transformability and small grain size. Toughness measurements by direct crack length measurements delivered unrealistically high fracture toughness values.

The use of principal components analysis provided information about the main characteristics of teams, based on a set of indicators, instead of displaying individualized information for each of these indicators. In this work we have considered reducing an extensive data matrix to improve interpretation, using the principal components analysis. Subsequently, with new components and with a multiple linear regression, we have carried out a comparative analysis between the best and bottom teams of LaLiga. The sample consisted of the matches corresponding to the 2015/16, 2016/17 and 2017/18 seasons. The results showed that the best teams were characterized and differentiated from bottom teams in the realization of a greater number of successful passes and in the execution of a greater number of dynamic offensive transitions. The bottom teams were characterized by executing more defensive than offensive actions and showing a fewer number of goals, a greater ball possession time in the final third of the field. Goals, ball possession time in the final third of the field, number of effective shots and crosses are the main performance factors that influence the offensive success of football. This information allows us to increase knowledge about the key performance indicators in football.

This review paper delves into the multifaceted aspects of pineapple cultivation, focusing on morphology studies, harvesting challenges, and mechanization efforts. Pineapple, renowned for its commercial value and unique flavor, holds a prominent position in global agriculture, with India alone producing 19.64 lakh tonnes annually. However, the hilly terrains of regions like northeastern India pose significant hurdles to traditional harvesting methods, necessitating innovative solutions. Understanding the morphology of pineapple plants is crucial for optimizing cultivation practices and designing efficient harvesting equipment. Insights from various studies shed light on leaf structure, fruit maturity, and growth patterns, providing valuable information for engineering tailored solutions. Mechanization endeavors, including semi-mechanized harvesting machines and semi-manual harvesters, demonstrate promising results in improving efficiency and reducing labor-intensive practices. Despite challenges such as increased crop losses and operational costs, continued research and development in mechanization hold the key to sustainable pineapple cultivation. This paper underscores the importance of integrating morphology studies and mechanization efforts to address the unique challenges faced by pineapple farmers, particularly in hilly terrains, and highlights the need for ongoing innovation to ensure the long-term sustainability of pineapple cultivation.

The aim of this study was to investigate the physicochemical characterization and biological activities of chitosan (CH) based composite films with the incorporation of chestnut flower essential oil (CFEO). The composite films were prepared by casting method and characterized in terms of structural, morphological and mechanical properties via FT-IR, XRD, UV, SEM and TGA. The results proved the significantly increased water vapor permeability (WVP), heat resistance, antibacterial and antioxidant capabilities of CH-CFEO films. The incorporation of CH and CFEO enhanced the UV blocking, which made the film shield almost all UV light. Films with the tensile strength of 6.37 ± 0.41 MPa and elongation at break of 22.57 ± 0.35% were got with 6 mg mL-1 CFEO. Subsequently, the fruit preservation experiments also confirmed that the composite films could effectively extend the shelf life of bananas through their excellent water vapor and oxygen barrier. These desirable performances enable our newly developed composite films to be a remarkable packaging material to solve the fresh fruit preservation dilemma.

Multilevel functional principal components analysis (mFPCA) is used to treat dynamical changes in shape in this article. Results of standard (single-level) FPCA are presented here also as a comparison. Monte Carlo (MC) simulation is used to create univariate data (i.e., a single “outcome” variable) that contains two distinct classes of trajectory with time. MC simulation is also used to create multivariate data of sixteen 2D points that represent (broadly) an eye; this data also has two distinct classes of trajectory (an eye blinking and an eye widening in surprise). This is followed-up by an application of mFPCA and single-level FPCA to “real” data consisting of twelve 3D landmark outlining the mouth that are tracked over all phases of a smile. By consideration of eigenvalues, results for the MC datasets find correctly that variation due to differences in groups between the two classes of trajectories variation are larger than variation within each group. In both cases, differences in standardized component scores between the two groups are observed, as expected. Modes of variation are shown to model the univariate MC data correctly, and good model fits are found for both the “blinking” and “surprised” trajectories for the MC “eye” data. Results for the “smile” data show that the smile trajectory is modelled correctly, namely: the corners of the mouth are drawn backwards and wider during a smile. Furthermore, the first mode of variation at level 1 of the mFPCA model show only subtle and minor changes in mouth shape due to sex, whereas the first mode of variation at level 2 of the mFPCA model govern whether the mouth is upturned or downturned. These results are all an excellent test of mFPCA, which show that mFPCA presents a viable method of modelling dynamical changes in shape.

3D facial surface imaging is a useful tool in dentistry and in terms of diagnostics and treatment planning. Between-groups PCA (bgPCA) is a method that has been used to analyse shapes in biological morphometrics, although various “pathologies” of bgPCA have recently been proposed. Monte Carlo (MC) simulated datasets were created here in order to explore “pathologies” of multilevel PCA (mPCA), where mPCA with two levels is equivalent to bgPCA. The first set of MC experiments involved 300 uncorrelated normally distributed variables, whereas the second set of MC experiments used correlated multivariate MC data describing 3D facial shape. We confirmed previous results of other researchers that indicated that bgPCA (and so also mPCA) can give a false impression of strong differences in component scores between groups when there is none in reality. These spurious differences in component scores via mPCA reduced strongly as the sample sizes per group were increased. Eigenvalues via mPCA were also found to be strongly effected by imbalances in sample sizes per group, although this problem was removed by using weighted forms of covariance matrices suggested by the maximum likelihood solution of the two-level model. However, this did not solve problems of spurious differences between groups in these simulations, which was driven by very small sample sizes in one group here. As a “rule of thumb” only, all of our experiments indicate that reasonable results are obtained when sample sizes per group in all groups are at least equal to the number of variables. Interestingly, the sum of all eigenvalues over both levels via mPCA scaled approximately linearly with the inverse of the sample size per group in all experiments. Finally, between-group variation was added explicitly to the MC data generation model in two experiments considered here. Results for the sum of all eigenvalues via mPCA predicted the asymptotic amount for the total amount of variance correctly in this case, whereas standard “single-level” PCA underestimated this quantity.

(1) Background: In order to study the effects of different electric cookers on the nutritional components of millet porridge, five different electric cookers were selected to cook millet porridge, and sensory and nutritional components in millet porridge, millet soup, and millet grains were analyzed. (2) Methods: Using principal component and cluster analysis, a variety of nutritional components were comprehensively compared. (3) Results: The results showed that among the different cooked samples, the content of amylose and reducing sugar was the highest in the samples cooked by electric cooker no. 3. The electric cooker no. 4 samples had the highest sensory evaluation score, crude fat, and protein content. The contents of ash, fatty acids, bound amino acids, and minerals were the highest in the electric cooker no. 5 samples. The sensory evaluation score and content of crude fat, ash, reducing sugar, direct starch, and Cu were higher in millet grains than in millet soup or porridge. The content of fatty acid, protein, amino acid, Zn, Fe, Mg, Mn, and Ca was highest in millet soup. Different electric cookers produced millet porridge with varying nutritional levels. (4) Conclusions: This study provides a reference for the further development of new electric cookers.

The recent demand for reducing pollutant and CO2 emissions from internal combustion engines has created an urgent need for the development of ultra-lean burn engines that ensure combus-tion stability and reducing knocking tendency. One of the most promising methods is the Pre-chamber Spark Ignition (PCSI) system, where a jet of high-energy reactive gases, produced by pilot combustion in a pre-chamber, ignites the main combustion event in the cylinder. Given the intricate phenomena inherent to PCSI systems, conducting 3D CFD studies is imperative for a comprehensive analysis and optimal design. Furthermore, the detailed CFD model, combined with the calibrated 0-D/1-D model, is anticipated to yield a significant amount of new data that would be difficult to obtain through experimental approaches, making it essential for advancing our understanding and optimization of these systems. However, recently published papers re-port that some state-of-the-art models developed for conventional SI operation may not be pre-dictive under the challenging conditions of TJI systems, particularly under lean conditions. This review elucidates the reasons behind the widespread adoption of CFD in the optimal design of PCSI engines. It presents significant examples and delves into the potential and challenges of employing CFD not just as a predictive tool but also as a design instrument for enhancing PCSI engine performance.

In automated manufacturing systems, most of the manufacturing processes including machining are automated. Automatic tool change is one of the important parameters for reducing manufacturing lead time. Ceramic cutting tools are used to machine hard materials. Ti[C,N] mixed alumina ceramic cutting tools are widely used to machine hardened steel and Stainless Steel due to its superior mechanical properties. Martensitic stainless steel has wide applications in screws, bolts, nuts and other engineering applications. Machining studies on Martensitic Stainless Steel was conducted using Ti[C,N] mixed alumina ceramic cutting tool. Tool life was evaluated using flank wear criterion. The tool life obtained from experimental machining process was taken as training dataset and test dataset for machine learning. Using the dataset obtained from experimental machining tool life model has been developed using Gradient Descent algorithm. The model was validated using co-efficient of determination. The accuracy of the machine learning model was tested using the test data and 99.83% accuracy was obtained. Tool life model based on Gradient Descent Algorithm was successfully implemented for the tool life of Ti[C,N] mixed alumina ceramic cutting tool.Keywords: keyword 1; keyword 2; keyword 3 (List three to ten pertinent keywords specific to the article; yet reasonably common within the subject discipline.)

Severe malaria is a major public health concern in Angola, particularly among adults, with limited data on clinical outcomes and manifestations. The study therefore assessed the clinical manifestations and outcome of severe Plasmodium falciparum malaria in adult patients admitted to Hospital Central Dr. António Agostinho Neto of Lubango, Angola. The study retrospectively reviewed the individual records of patients over 14 years old, admitted for severe malaria during the first trimester of 2021 and 2022. World Health Organization (WHO) criteria were used to define severity. A total of 640 patients were recorded into the study, 167 in 2021 and 473 in 2022, distributed across the departments; Intensive Care Unit (ICU; n=81), Medicine (MED; n=458) and Infectiology (INF; n=101). The median age was 26 years and 59.4% were males. The most common manifestation of severe malaria was renal impairment (37.4%). The overall mortality rate was 7% and decreased considerably from 10.2% in 2021 to 5.9% in 2022. The increase in malaria cases during 2022 with increased in prevalence of life-threatening signs like renal impairment, jaundice and impaired conscience, underscores the urgent need for enhanced malaria control and surveillance strategies to mitigate morbidity and mortality, highlighting the potential for antimalarial drug resistance.

For this research we are selected three indicators of wheat: yield (t/ha), producer price (USD/t) and share of the harvested area under wheat in relation to the total land area of country (%). The mentioned indicators were analyzed for the period 2006-2021 in thirty-two European countries. The purpose of the research is to determine which of the mentioned indicators achieve average annual growth/decrease rates, what is the correlation between them, how European countries are grouped with their similarities and differences. The research examines the impact of the COVID-19 pandemic on the mentioned indicators in a two time phases: Phase I, before the pandemic (2006-2019); Phase II, during the pandemic (2020-2021). The methodological approach to the research topic involved the application of descriptive statistics, as the method of principal components analysis (abbr. PCA) with graphics. A positive correlation exists only between the yield of wheat and the share of the harvested area under wheat in the total area of the land (0.291). PCA method showed that countries are grouped differently depending on the observed indicator and the analyzed time phase.

Obesity is a worldwide epidemic; hence it is crucial to understand how it can be effectively prevented/treated. Thus, obesity should be tackled considering that it is a multifactorial condition. This work examines a wide range of factors and attempts to understand which contribute most to variability in overweight/obesity. Eighty-four subjects with overweight/obesity were recruited. Dietary baseline information was obtained by analyzing three 24-hour recalls. Resting metabolic rate was measured using indirect calorimetry, physical activity through accelerometry, cardiometabolic parameters were determined in blood samples and body composition by anthropometry and bioimpedance. Factor analysis of principal components (PCA) was carried out (SPSS v22.0). Large interindividual variability was observed in dietetic, biochemical, and physical activity measurements (coefficient of variation ≥30%), but body composition was homogeneous. Volunteers had an unbalanced diet and low physical activity. PCA reduced the 26 analyzed variables into 7 factors, accounting for 81,5% of total data variability. The main factor was the ‘‘caloric and lipid factor’’ related to diet, responsible for 25.9% of total variability, followed by ‘‘adiposity factor’’ (16,9%) and ‘‘cardiometabolic risk factor’’ (13,2%). Diet seems to be the factor that contributes the most to data variability in people with overweight/obesity, especially the intake of lipids, energy and proteins.

Using numerical simulation method, combined with the pre-branch material characteristics of the measurement results, based on the LS-DYNA software to simulate the branch crushing process, the analysis found that not only the existence of the cutter cutting in the branch destruction process, there is also the cutting of the opposing surface of the bending fracture, with the increase in the speed of the knife rollers, the cutter cutting resistance increases, the cutting resistance reaches 2690 N when the cutter at 2500 r/min, the cutter cutting resistance is the smallest in the cutting simulation at the blade angle of 55°, the blade angle is more suitable for the cutting of the branch. In the cutting simulation under different cutting edge angles, the cutting resistance of the tool is the smallest when the edge angle is 55°, which is 1860 N. This edge angle is more suitable for branch crushing and cutting. Using Fluent software to analyse the airflow characteristics of the crushing device, it was found that with the increase of the knife roller speed, the inlet flow and negative pressure of the crushing chamber are increasing, the speed of 2500 r/min, the inlet flow and negative pressure were 1.92 kg/s and 37.16 Pa, which will be conducive to the feeding of branches, but the speed is too high and it will also lead to the enhancement of the vortex of part of the area in the crushing device, which will affect the feeding of branches and the throwing of the crushed material. affect the feeding of branches and the throwing out of crushed materials, and finally determined the speed range of the crushing knife roller is 1800 ~ 2220 r/min. Based on ANSYS/Model module modal analysis of the crushing knife roller, the knife roller of the first six orders of the intrinsic frequency and vibration pattern, crushing knife roller of the lowest order of the modal intrinsic frequency of 137.42 Hz, much larger than the crushing knife roller operating frequency of 37 Hz, the machine will not resonate during operation.

Despite soccer popularity, comparatively little scientific information is available concerning the assessment of youth players’ physiological characteristics. The use of medical software integrating wearable sensors to provide accurate and objective data is necessary. In the present study, the objective assessment of physical performance of 128 adolescent soccer players at two timepoints (pre-season and end-season) has been performed. Participants completed a comprehensive test battery including stability, countermovement jumps (CMJ), plyometric jumps (PJ), agility, and quick feet tests. A single Inertial Measurement Unit (IMU) sensor provided quantitative data on various performance metrics. Principal Component Analysis (PCA) reduced the dataset to four principal components (PCs) explaining over 80% of the variance: power (PC1), balance (PC2), speed/agility (PC3), and stiffness (PC4). Paired samples t-test between the two timepoints showed no significant differences in the PCs between the two timepoints, indicating that the training program did not significantly alter the assessed physical attributes. However, subtle individual changes may still inform personalized training adjustments. The study highlights the importance of continuous monitoring and individualized training strategies to optimize athlete performance and reduce injury risk.

Clinical and laboratory diagnostics are particularly important in monitoring the internal homeostasis of the body in high-yielding animals, especially in dairy cows, whose metabolism is under constant pressure to obtain high parameters of milk production and reproduction. Knowledge of laboratory test results and relationships based on significant correlations between various milk and blood parameters may be very useful in veterinary diagnostics and helpful in cattle practice in order to protect animal health and the quality of milk production. The aim of the study was to analyze the correlation between selected hematological biomarkers such as white blood corpuscles (WBC), red blood corpuscles (RBC), hemoglobin concentration (HGB), hematocrit (HCT), platelets (PLT), erythrocyte mean corpuscular volume (MCV), mean corpuscular hemoglobin content (MHC), mean corpuscular hemoglobin concentration (MCHC) and selected quantitative-qualitative parameters of cow’s milk such as current milk production, somatic cells count (SCC), colony of bacteria forming units (CFU), milk fat (MF), milk protein (MP), milk lactose (ML), milk solids (S), solids non-fat in milk (SNF), daily milk production. Samples were collected three times at daily intervals from 11 clinically healthy late-lactation dairy cows obtaining 33 sets of test results. This repeated study of cows allowed for obtaining a homogeneous group in order to determine statistical correlations between selected blood and milk parameters. Many significant correlations were found between the examined parameters. In cows, significant positive correlations were recorded between milk production and HGB, HCT, MCV or MHC. Significant negative correlations were also found between SCC and HGB, SCC and HCT, SNF and MCV, SNF and MHC, and between MF and RBC.

Additive manufacturing processes offer various options to fabricate metal parts, which show numerous ecological and technological advantages compared to formative and subtractive manufacturing methods. Due to quick availability and high accuracy, they are particularly suitable to produce complex prototypes. Metal fused deposition modeling is a relatively new material extrusion additive manufacturing technique based on the widely used fused filament deposition process. This study focuses on the Inconel 625 metal filament from Markforged Inc., it consists of a mixture of metal powder and a binder system, the latter being removed during washing and sintering. In this article, the mechanical properties of printed and sintered Inconel were investigated using tensile testing specimens with three different infill patterns, solid, triangular, and gyroid, printed in flatwise and upright direction. In addition, investigations into the dimensional accuracy of the printed specimens and the sintering shrinkage were carried out. The results showed that neither the dimensional accuracy nor the sintering shrinkage was significantly influenced by the printing orientation. In the context of lightweight engineering, the structures proofed beneficial especially within the elastic region. Generally, triangular infill patterns resulted in higher stiffness, while gyroids led to more ductile specimens. A mass-related evaluation of tensile testing elucidates that with aid of the infill structures weight savings of 40 % resulted in mechanical performance decreased by only 20 % on average.

Principal Component Analysis (PCA) is a method that identifies common directions within multivariate data and presents the data in as few dimensions as possible. One of the advantages of PCA is its objectivity, as the same results can be obtained regardless of who performs the analysis. However, PCA is not a robust method and is sensitive to noise. Consequently, the directions identified by PCA may deviate slightly. If we can teach PCA to account for this deviation and correct it, the results should become more comprehensible. The methods for doing this and an issue with this are presented.

Heat pumps are increasingly becoming a key solution in the quest for decarbonization, offering a significant advantage over traditional boilers due to their superior energy efficiency. Not only can heat pumps provide both heating and cooling, but they also achieve thermal efficiencies exceeding 500%, which can seem to defy conventional expectations. The outdoor unit of a heat pump consists of about twenty main components, one of which is a complex network of copper pipes and sheets welded to valves, connectors, and other fittings. This set involves over thirty welded joints, highlighting a significant opportunity for reducing manufacturing time through process optimization. Copper is a critical material extensively used in various applications due to its excellent thermal and electrical conductivity. However, these very properties make welding copper particularly challenging, especially when aiming to automate and streamline industrial processes. Traditionally, connecting copper pipes and fittings is done through brazing, yet, alternative methods such as LASER welding, electron beam welding, resistance welding, friction welding, and ultrasonic welding also exist. This study focuses on the ultrasonic welding of copper, aiming to identify the optimal parameters that maximize the mechanical strength of overlapping joints and ensure effective tube sealing. Experimental results showed that for copper sheets, the best outcomes were achieved with a welding time of 3 s and a pressure of 6 bar. For tube sealing, the optimal conditions were a welding time of 3 s and a pressure of 4 bar. For both scenarios, the same variables were used, retention time of 0.62 s, initial pressure of 2 bar, retention pressure of 2 bar and sonotrode rising pressure of 3 bar. The analysis reveals that ultrasonic welding of copper can achieve both robust mechanical strength and reliable sealing, making it a promising technique for industrial applications.

The paper provides and comments on the results of studies of the effect of sandstone-based abrasives and quartz sand alone on the wear of martensitic surfaces of wear-resistant steels. The wear process was examined on a ring-on-ring test rig seeking to determine the mass decrement parameter which characterised wear. The tests were conducted for three sandstone varieties: Carboniferous, Permian, and Cretaceous, and they made it possible to determine that the most intense process of deterioration of wear-resistant steels took place in the presence of quartz sand grain, while less intense wear was observed in the case of sandstone-based abrasives. The mass decrement values established in the presence of the sandstones in question did not differ significantly between individual sandstone varieties. Based on a surface damage analysis, the basic damage mechanism was found to be micro-scratching, however, with regard to the sandstones examined, it was also determined that individual grains could be pressed into surface irregularities, as well as that films of soft hematite cement developed in the Permian sandstone and that inclusions of carbonaceous matter were formed in the Carboniferous sandstone. With reference to the wear process observations, a wear model was described for the surface of the steels examined in the presence of sandstone-based abrasives.

Pseudomonas donghuensis P482 exhibits broad antibacterial and antifungal activity, primarily related to the production of 7-hydroxytropolone (7-HT). However, the restricted nutritional conditions (viz. mineral medium with single carbon source) diminished the antagonistic activity of P482. In this study, we unveil profiles of the secondary metabolites from P482 and its selected mutants, using nutrient-diluted (10% tryptone soy broth, TSB) and nutrient-restricted (M9 with either 0.4% glucose or 0.4% glycerol as a sole carbon source) media to explore differences in the quantity and quality of the secondary metabolites produced. No 7-HT was found to be synthetized by P482 under restricted nutritional conditions. However, both the wild-type and the tested mutants of P482 still did express some antagonistic activity towards the plant pathogenic bacteria tested. Based on these results, we postulate that 7-HT is not the sole antimicrobial compound produced by P. donghuensis P482 and that other antimicrobials may be involved in P482 antagonistic activity under limiting-nutrient conditions.

Proton Exchange Membrane Fuel Cell (PEMFC) is a fast-developing battery technology, and the key to its reliability and lifespan improvement lies in the accurate assessment of durability. However, the degradation mechanism of PEMFC is hard to determine and its internal parameters are highly coupled. Thus, the development of the more accurate life prediction model that meets the actual scenarios is urgent to investigate. To solve this problem, a multi-feature fusion life prediction method based on Temporal Convolutional Network-Gated Recurrent Unit (TCN-GRU) is proposed. A TCN algorithm is used as the prediction base model, and two GRU modules are included to the model to strengthen the model expression ability and improve its predictive accuracy. Two widely recognized datasets and two operating conditions are utilized for model training and prediction, respectively. Comparisons are made with single-feature parameter models in terms of Root Mean Square Error (RMSE) and Determination Coefficient (R2). The results show that the prediction accuracy of the TCN-GRU multi-feature fusion model is higher than that of the single-feature models in terms of stability and anti-interference under both operating conditions. Furthermore, with the increase of input feature parameters, the TCN-GRU model is closer to the real value, which proves once again that the proposed model can meet the accuracy requirements of the life prediction of PEMFC.

Most research on colostrum quality and colostrum management focuses on maternal IgG transfer to the newborn calf. However, in addition to being a source of antibodies, colostrum has other components that influence passive immune transfer, nutrition, gut maturation, and thermoregulation. In this review, the constituents in the bovine colostrum, as well as their variation, are explored and it is discussed the biological role of colostrum on the newborn calf. Protein is the nutrient in higher concentration and fat is the nutrient with the most variation. There is a pronounced amplitude in the total solids content of colostrum, but the average concentration does not vary much between studies (24.7%). Bovine colostrum major components can vary with several factors, such as the region, season, breed, dry period length, and nutritional aspects of the dam. Bioactive components, cells, and microbiome variability are less understood, besides IgG. Regardless, they play crucial distinct roles in the physiological development of the newborn. However, a multi-interactive effect between these components, cells, and microorganisms is more likely to occur. Recently researched components in colostrum like miRNA, nucleo(t)sides, the milk fat globule membrane, oligosaccharides, minor proteins, and the microbiome are examples of promising interest areas of study.

Abrus precatorius is a medicinal herb originated from Southeast Asia and native to India. The Hindustani centre of origin was found to possess lot of variability especially with respect to seed color. However, no previous researchers have focused on studying the variability by including the entire variability of the region. A total of 99 accessions were analyzed for its biochemical components like moisture content, total phenols, antioxidants, ash content, protein content, total monomeric anthocyanin and flavonols. Principal component analysis (PCA) shown that first three components viz., seed color, phenols and antioxidants are major principal components that contribute to 80.86% of total variability in the germplasm. The dendrogram constructed based on the biochemical data and by using the software Darwin version 6.0. formed three main clusters i.e. cluster 1, cluster 2 and cluster 3 which contain 55 accessions, 40 accessions and 1 accession respectively. Seed color was found to be the main criteria based on which the Abrus accessions were grouped. Accessions from different clusters also differ for their mean phytochemical constituents. Germplasm curators / plant breeders can select such elite genotypes and utilize them in crop improvement programmes.

To investigate the bioactivities of fresh garlic and its processed product, black garlic, we conducted comparative analyses of antioxidant, anti-inflammatory, innate immune activation and anti-cancer activities, in addition to chemical composition (sugar, amino acid, polyphenol contents) of these materials. Simultaneous assay using neutrophil-like cells showed that fresh garlic exhibited antioxidant and innate immunostimulatory activities, whereas black garlic displayed a potent anti-inflammatory effect. The antioxidant activity index was correlated with phenol and flavonoid contents, while the innate immunostimulatory activity was correlated with fructan content. Furthermore, some black garlics with low fructose content were found to inhibit the proliferation of UM-UC-3 cancer cells, while other black garlics rich in fructose increased UM-UC-3 cell proliferation. It was shown that the thermal processing steps of fresh garlic could change the composition of sugars, antioxidants, and amino acids, which have different effects on neutrophil-like cells and UM-UC-3 cells, as well as on bioactivities.

Displacement mapping is a computer graphics technique that enables the design of components with regularly or randomly textured surfaces that can be quickly materialized on a three-dimensional (3D) printer when needed. This approach is in principle more flexible, faster and more economical compared to conventional texturing methods, but the accuracy of the texture depends heavily on the parameters used. The purpose of this study is to demonstrate how to produce a surface-textured part using polygonal (mesh) modeling software and a photopolymerizable resin, and to develop a universal methodology to predict the dimensional accuracy of the model file log combined with a resin 3D printer. The printed components were characterized on a scanning confocal microscope. In the setup used in this study, the mesh size had to be reduced to 10% of the smallest feature size and the textured layer had to be heavily (x4) overexposed to achieve the desired accuracy. As a practical application, two functional stamps with a regular (honeycomb) and a random texture, respectively, were successfully manufactured. The insights gained will be of great benefit in quickly and cost-effectively producing components with innovative patterns and textures for a variety of hobby, industrial and biomedical applications.

Background: Cardiovascular (CV) morbidity and mortality are many times higher in chronic kidney disease (CKD), as well as IgA nephropathy (IgAN), than in the general population. The occurrence of metabolic syndrome (MetS) and metabolic risk factors are independent risk factors for CV disease and renal progression. The study aimed to determine the prognostic role of metabolic profiles in a homogenous group of CKD patients. Methods: One hundred and forty-five IgA nephropathy patients (92 male, 53 female, age 54.7 ± 13 years) with CKD stage 1-4 were investigated and followed for a median of 190 months. The composite (CV and renal) endpoints included all-cause mortality and any CV event such as stroke, myocardial infarction, revascularization (CV), end-stage renal disease, and renal replacement therapy (renal). Results: Patients with MetS had significantly more endpoint events (16/27 patients vs. 15/98 patients, p = 0.001) compared to the nonMetS group. Of the secondary endpoints (CV or renal separately), the rate of the renal and CV endpoints was significantly higher in the MetS group (p = 0.001 and p = 0.029). The primary endpoint independent predictors of survival were dyslipidemia, eGFR, hemoglobin, urine albuminuria, and diabetes mellitus, as determined by Cox regression analysis. Independent predictors of secondary renal endpoint were dyslipidemia, hemoglobin, urine albumin, and eGFR. Predictors of secondary cardiovascular endpoints were gender, BMI, and diabetes. Kaplan-Meier curves showed significant differences in MetS and non-MetS when examined at the combined endpoints (CV and renal) or at each endpoint separately. The primary endpoint rate increased significantly with the increased number of MetS components (MetS comp. 0 vs. MetS comp. 2+, primary endpoints, p = 0.012). Conclusion: Our results showed that the metabolic profile has a prognostic role not only for renal endpoints but also for CV endpoints in IgAN. BMI, hyperuricemia, hypertension, and diabetes have a predictive value for the prognosis of IgA nephropathy.

Analyzing big data poses a great challenge for numerous researchers to explore the data structure. Dimension reduction methods can be used to reduce data dimensionality, taking it from occupying a high-dimensional space to existing in a lower-dimensional space while retaining as much information as possible. Principal Component Analysis is one of the most popular used to reduce the dimensional space. The bootstrap sample is obtained by randomly sampling n times with replacement from the original sample, the method provides easy tool to understand the interactive component and develop the process. There are not enough researches discussed the stability of PCA method using bootstrap method. In this paper, the bootstrap method is used to analyze the stability of PCA results and to estimate the number of PCA in efficient way. The method is used to estimate the number of PCA that needed to classify the data set, and the effectiveness of the discussed techniques is demonstrated through real data sets.

Weighted Student Funding (WSF) systems have been implemented in various countries to give schools more autonomy over how to allocate their funding. School principals use funding to maintain school operations and foster innovation for achieving educational goals. However, despite the importance of this process, scholarly research has largely overlooked how principals make decisions about their financial resources. Accordingly, this study seeks to provide practical insights into the strategies used by one school by highlighting their staff’s perceptions about using their WSF to maintain school operations and spur innovation. Using a case study approach, we investigated a principal who effectively used a school’s WSF to transform a failing school into an innovative one. The findings revealed that the principal strategically implemented financial management mechanisms in a way that inspired teachers to deeply consider how a school's WSF can help achieve educational goals. The principal fostered consensus on the school's direction, encouraged innovation through hands-on experiential learning and strategic planning, and facilitated funding for innovative teachers by guiding proposal development. Insights into the shifting cultural and practical landscape of financial resource utilization within schools are discussed.

Principal component analysis (PCA) is used to reduce the dimensionalities of high dimensional datasets in a variety of research areas. For example, biological macromolecules, such as proteins, exhibit many degrees of freedom, allowing them to adopt intricate structures and exhibit complex functions by undergoing large conformational changes. Therefore, molecular simulations of and experiments on proteins generate a large number of structure variations in high dimensional space. PCA and many PCA-related methods have been developed to extract key features from such structural data, and these approaches have been widely applied for over 30 years to elucidate macromolecular dynamics. This review mainly focuses on the methodological aspects of PCA and related methods, and their applications for investigating protein dynamics.

(1)Background：To date, no studies have epidemiologically examined whether the concentration of particulate matter (PM) 2.5 and its ionic components is related to the prevalence of skin symptoms. Therefore, this study aimed to clarify this association in patients with allergic diseases. (2)Methods: From February 1 to May 31, 2020, we evaluated the daily prevalence of skin symptoms in outpatients with allergic diseases being treated at Fukuoka Hospital, Fukuoka, Japan, and measured the concentration of PM2.5 and its ionic components. （3）Results: Univariate analysis showed a statistically significant association between skin symptoms and the concentration of PM2.5 and the ionic components SO42-, NH4+, K+, and Mg2+, and multivariate analysis showed a statistically significant association between the daily prevalence of skin symptoms and the concentration of the ionic components SO42- or Mg2+. (4)Conclusions: Our findings indicate that the concentration of some PM2.5 ionic components may affect skin symptoms in patients with allergic diseases.

To fulfil a need of limitation automotive emissions the reduction of vehicle weight is widely recommended and achieved in many ways, both by the construction of individual elements of the vehicle, and by the selection of light materials including Al alloys. Connecting these elements with each other and with elements made of iron alloys can be realized, inter alia, by welding or stir welding. However, the quality of the welds obtained varies widely and depends on many design, operational and environmental factors. The present study focused on a review of various welding technics used to joint both similar and dissimilar Al alloys utilized in automotive industry, the effect of various process parameters on welds quality, and phenomena appeared in such welds..

Abstract Big datasets are becoming increasingly common and can be challenging to understand and apply in public health. One method for lowering the dimensionality of these datasets and improving interpretability while minimizing information loss is data reduction using principal component analysis (PCA). It achieves this by successively maximizing variance through the creation of new, uncorrelated variables. PCA is an adaptive data analysis technique because it simplifies the process of finding new variables, or principal components, by solving an eigenvalue or eigenvector problem. These new variables are determined by the dataset being used, rather than by the analyst starting from scratch. It is also adaptable in another way because varieties of the method have been designed to adjust to various data structures and types. However, there are serious problems in the theoretical understanding and practical application of PCA in public health researchers, whereas its application is becoming popular in developing countries. Therefore, this article, which concentrated on using PCA to reduce data, began by outlining the fundamental concepts of PCA and going over what it can and cannot do, as well as when and how to use it. We also discussed the fundamental assumptions, benefits, and drawbacks of PCA. Furthermore, this article demonstrated and resolved PCA practical application problems in public health that most scholars are unaware of, such as variable preparation, variable inclusion and exclusion criteria for PCA, iteration steps, wealth index analysis, interpretation, and ranking.

This work develops a new method for vector data augmentation. The proposed method applies the Principal Component Analysis (PCA) and determines the Eigenvectors of a set of training vectors for a Machine Learning (ML) method and uses them to generate the distilled vectors. The training and the PCA distilled vectors have the same dimension. The user chooses the number of vectors to be distilled and augmented to the set of training vectors. A statistical approach determines the lowest number of vectors to be distilled such that when augmented to the original vectors the extended set trains a ML classifier to achieve a required accuracy. Hence, the novelty of this study is, the distillation of vectors with the PCA method and their use to augment the original set of vectors. The advantage that comes from the novelty is that it increases the statistics of ML classifiers. To validate the advantage, we conducted experiments with four public databases and applied four classifiers: Neural Network, Logistic Regression, Support Vector Machine with linear and polynomial kernels. For the purpose of augmentation, we conduct several distillations including nested (double distillation). The latter notion means that new vectors were distilled from already distilled vectors. We train the classifiers with three sets of vectors: original vectors; original augmented with vectors distilled by PCA; original augmented with distilled and double distilled, by PCA, vectors. The experimental results are presented in the paper, and they confirm the advantage that the PCA distilled vectors increase the classification statistics of ML methods, if the distilled vectors augment the original training vectors.

Automatic ice charting can not be achieved using only SAR modalities. It is fundamental to combine information from other remote sensors with different characteristics for more reliable sea ice characterization. In this paper, we employ principal feature analysis (PFA) to select significant information from multimodal remote sensing data. PFA is a simple yet very effective approach that can be applied to several types of data without loss of physical interpretability. Considering that different homogeneous regions require different types of information, we perform the selection patch-wise. Accordingly, by exploiting the spatial information, we increase the robustness and accuracy of PFA.

Due to its spatio-temporal variability, the mismatch between the weather and demand patterns challenges the design of highly renewable energy systems. A principal component analysis is applied to a simplified networked European electricity system with a high share of wind and solar power generation. It reveals a small number of important mismatch patterns, which explain most of the system's required backup and transmission infrastructure. Whereas the first principal component is already able to reproduce most of the temporal mismatch variability for a solar dominated system, a few more principal components are needed for a wind dominated system. Due to its monopole structure the first principal component causes most of the system's backup infrastructure. The next few principal components have a dipole structure and dominate the transmission infrastructure of the renewable electricity network.

In the construction sector, the integration of biobased materials has emerged as a pivotal aspect of EU policies, aimed at promoting sustainable practices throughout the value chain to mitigate resource consumption and carbon emissions. This paper explores the development and validation activities of a bio-based façade system within the Basajaun H2020 project, focusing on enhancing the utilization of biobased components within building envelopes to replace conventional solutions with eco-friendly alternatives. This paper reports the methodologies employed to detect requirements and outline the testing protocols undertaken to validate the façade system design devised within the project focusing on the original façade components as the bio composite profile. Vision and opaque façade modules are prototyped and tested following curtain wall standards standard for performance and acoustic assessments, to showcase the efficacy of the developed solution. The conducted tests demonstrate the feasibility of integrating bio-based components into building envelopes, aligning with project expectations, and prevailing standards for curtain wall façade solutions. Notably, the designed façade system meets technical conditions and project objectives. Nevertheless, the research underscores the need for further refinements to facilitate solution industrialization and explore broader market applicability. Future efforts will focus on addressing these improvements and assessing the scalability of the solution.

Some studies investigated the relationship between frequency domain analysis of heart rate variability and the cognitive performance at the Stroop task. We propose a combined assessment also of trunk mobility in 72 healthy women to investigate the relationship between cognitive, cardiac and motor variables based on a principal component analysis. We also assessed the change on this result after an intervention of two months aiming at improving the perception-action link. At baseline, the PCA correctly identified 3 components: one related to cardiac variables, one to trunk motion and one to the performance of Stroop task. After the intervention, only two components were found with trunk symmetry and range of motion, accuracy and time to complete the Stroop task and low frequency heart rate variability aggregated in a single component by PCA. It suggested that this protocol was effective in investigating the embodied cognition and we defined this approach as “embodimetrics”.

State Forest Management Organizations (SFMOs) play a crucial role in the European forest sector, managing almost half the forests in the region. SFMOs are often managed for timber production only whereas, being publicly owned, they should play an important role in providing a vast range of public goods (e.g. soil protection, biodiversity conservation). Their management goals depend on the history and current conditions of the forest sector at a national level, as well as different challenges and the potential for development. Although there is a lack of knowledge about the current performance of SFMOs, there have been recent changes to their management goals and practices in response to the new demands expressed by society (e.g. transparency, social inclusion). The main purpose of this study is to analyse the current situation of SFMOs by clustering them according to indicators that reflect three pillars of the common understanding of sustainable forest management (SFM) concept. With the help of Principal Component Analysis (PCA), we grouped countries according to common characteristics of the forest sector at the national level. Results show three main clusters of SFMOs in Europe. The first cluster has rather small but commercially-oriented forestry unit together with other business activities and a strong focus on public services. The second sees itself as the protector of public interest, rather than commercially-oriented organisations. The third is mainly profit-seeking. The existence of diverse SFMO clusters shows the possibility of different approaches for SFM with a focus on different goals (e.g. profit gaining, public service delivery).

The prominent cultivation of lemongrass relies on the pharmacological incentives of its essential oil. The lemongrass essential oil (LEO) has a significant amount of citral (mixture of geranial and neral), isoneral, isogeranial, geraniol, geranyl acetate, citronellal, citronellol, germacrene-D, and elemol in addition to numerous other bioactive compounds. These components confer various medicinal activities to LEO including antifungal, antibacterial, antiviral, anticancer, and antioxidant properties. These attributes are commercially exploited in pharmaceutical, cosmetics, and food preservations industries. Furthermore, the employment of LEO in the treatment of cancer opens a new vista in the field of therapeutics. Although different LEO components have shown promising anticancer activities in vitro, these effects have not been assessed yet in humans. Further studies on the anticancer mechanisms exerted by lemongrass components are required. The present review intends to provide a timely discussion on the relevance of lemongrass extracts in cancer and health treatment, and in food industry applications.

In this research, an attempt was made to reduce the dimension of wavelet-ANFIS/ANN (artificial neural network/adaptive neuro-fuzzy inference system) models toward reliable forecasts as well as to decrease computational cost. In this regard, the principal component analysis was performed on the input time series decomposed by a discrete wavelet transform to feed the ANN/ANFIS models. The models were applied for dissolved oxygen (DO) forecasting in rivers which is an important variable affecting aquatic life and water quality. The current values of DO, water surface temperature, salinity, and turbidity have been considered as the input variable to forecast DO in a three-time step further. The results of the study revealed that PCA can be employed as a powerful for dimension reduction of input variables and also to detect inter-correlation of input variables. Results of the PCA-Wavelet-ANN models are compared with those obtained from Wavelet-ANN models while the earlier one has the advantage of less computational time than the later models. Dealing with ANFIS models, PCA is more beneficial to avoid Wavelet-ANFIS models creating too many rules which deteriorate the efficiency of the ANFIS models. Moreover, manipulating the Wavelet-ANFIS models utilizing PCA leads to a significant decreasing in computational time. Finally, it was found that the PCA-Wavelet-ANN/ANFIS models can provide reliable forecasts of dissolved oxygen as an important water quality indicators in rivers.

Coccomyxa subellipsoidea KJ (C-KJ) is a green alga with unique immunoregulatory characteristics. Here, we investigated the mechanism underlying the modification of T cell function by C-KJ components. The water-soluble extract of C-KJ was fractionated into protein (P) and sugar (S) fractions [acidic (AS), basic (BS), and neutral (NS)]. These fractions were used for the treatment of peripheral blood mononuclear cells stimulated with toxic shock syndrome toxin-1. Transcriptome analysis revealed that both P and AS enhanced the expression of the genes encoding metallothionein (MT) family proteins, inflammatory factors, and T helper (Th) 17 cytokine and suppressed that of those encoding Th2 cytokines in stimulated T cells. The kinetics of MT1 and MT2A gene expression showed a transient increase in MT1 and maintenance of MT2A mRNA after T cell stimulation in the presence of AS. The kinetics of Th17-related cytokine secretion in the early period were comparable to those of MT2A mRNA. Furthermore, our findings revealed that static, a STAT-3 inhibitor, significantly suppressed MT2A gene expression. These findings suggest that the expression of MTs is involved in the immune regulatory function of C-KJ components, which is partially regulated by Th17 responses, and may help develop innovative immunoregulatory drugs or functional foods.

Citrus essential oils (EOs) have various bioactivities like antioxidants, with many applications. Antioxidant activities depend on the chemical compositions of the EOs, which are affected by climate, soil, and geographical region. Thus, investigations on chemical compositions and antioxidant activities of Citrus EOs in different countries are valuable. In this study, we distilled EOs from peels of Indonesian-grown Citrus, including C. nobilis, C. limon, C. aurantifolia, C. amblycarpa, and Citrus spp.Chemical compositions of EOs were analyzed using Gas Chromatography-Mass Spectrometer (GC-MS), whereas the antioxidant activities were determined by employing 2,2-diphenyl-2-picrylhydrazyl (DPPH) method. Furthermore, principal component analysis (PCA) was applied to elucidate the main contributing compounds for antioxidant activity. The results show that all EOs possess unique chemical characteristics, with limonene as the majority constituent. For antioxidant activities, C. limon and C. amblycarpa EOs are the two strongest, IC50 values below 7.00 μL/mL. PCA approach suggests that -terpinene mainly contributes to the high antioxidant activities of C. limon and C. amblycarpa. Moreover, o-cymene, thymol, p-cymene, and α-pharnesene may also be responsible for the antioxidant activity of C. limon EO. These results are valuable information for the applications of Citrus EOs as antioxidant sources.

Grasslands are at risk of degradation due to unsustainable management practices and climate change. Sustainable grassland soil management can promote ecosystem service delivery and improve the resilience of the entire grassland ecosystem to anthropogenic change. Here, we re-view the principal soil quality indicators (SQIs) and how they have been used to evaluate the sustainability of different grassland management practices globally. We then discuss sustainable grazing management practices, before reviewing some novel grassland species which may im-prove grassland resilience with relevance for grassland management in Europe and the UK. We also give an overview of current sustainable grassland management methods and their assessment at field scale. From this, we suggest that sustainable Grazing Management Plans (GMPs), together with the testing of drought-resistant grass species and appropriate SQIs monitoring, is key to increasing resilience of grassland ecosystems to anthropogenic change.

Cardiovascular disease is the number one cause of death in the world and Quoting from WHO, around 31% of deaths in the world are caused by cardiovascular diseases and more than 75% of deaths occur in developing countries. The results of patients with cardiovascular disease produce many medical records that can be used for further patient management. This study aims to develop a method of data mining by grouping patients with cardiovascular disease to determine the level of patient complications in the two clusters. The method applied is principal component analysis (PCA) which aims to reduce the dimensions of the large data available and the techniques of data mining in the form of cluster analysis which implements the K-Medoids algorithm. The results of data reduction with PCA resulted in five new components with a cumulative proportion variance of 0.8311. The five new components are implemented for cluster formation using the K-Medoids algorithm which results in the form of two clusters with a silhouette coefficient of 0.35. Combination of techniques of Data reduction by PCA and the application of the K-Medoids clustering algorithm are new ways for grouping data of patients with cardiovascular disease based on the level of patient complications in each cluster of data generated.

The Inefficient water use, varying and low productivity in Kenya public irrigation schemes is a major concern. It is therefore necessary to periodically monitor and evaluate the performance of public irrigation schemes. The performance of public irrigation in western Kenya was assessed by combining benchmarking methodology and principal component analysis. The aim was to quantify and rank the performance of pumped public irrigation schemes in Kenya. Eleven benchmarking indicators were computed for the period from 2012 to 2016 and compared to global benchmark values. The indicators used fall under agricultural productivity, water supply and financial performance categories. The computed agricultural productivity was 36%–51% in Ahero, 23%–42% in West Kano and 26%–50% Bunyala irrigation scheme. Water supply performance in Ahero, West Kano and Bunyala irrigation schemes varied from 24% to 58%, 3% to 49% and 19% to 43% respectively. Financial performance varied from 46% to 54% in Ahero, 25% to 32% in West Kano and 54%–56% in Bunyala irrigation scheme. An average overall performance efficiency of 46%, 39% and 31% was obtained in Ahero, Bunyala and West Kano irrigation schemes respectively. The performance of the irrigation schemes is very poor and measures on improving performance are needed.

A compositional data vector is a special type of multivariate observation in which the elements of the vector are non-negative and sum to a constant, usually taken to be unity. A compositional data does not have zero and only retains relative information. Furthermore, comparisons can only be made between compositional data of the same component. The relevant sample space is the standard simplex. A simplex space is a space that is a generalized form of a triangle. For compositional data, many of the operations defined in Euclidean space are meaningless. Microbiome analyzes have become popular in recent years. Operational Taxonomic Units (OTU) and Amplicon Sequence Variants (ASVs) used in microbiome analysis are one type of compositional data. The microbiome data are counts of different species within a sample and it is compositional. Although there is an order of bacterial abundance within a sample, there is no order of bacterial abundance between samples. Firmicutes and Bacteroidetes, the major phyla in the colon, have been observed in humans worldwide. Gut microbiome analyses often use the Firmicutes/Bacteroidetes ratio and principal coordinates analysis (PCoA). Alpha and beta diversities are used as indicators of bacterial flora diversity. However, misinformation is pervasive in the human microbiome literature and analysis. There is a lot of misunderstanding regarding compositional data and its analysis. An attempt was made to demonstrate how to analyze using the “National Institutes of Biomedical Innovation, Health and Nutrition (NIBIOHN JMD) (Public Data).” The results showed that PCoA did not work, and principal component analysis (PCA) was useful for analyzing the gut microbiome relative diversity.

This paper focuses on the application of principal component analysis (PCA) to conduct a source apportionment of atmospheric aerosols from 8 sampling locations along the Marilao-Meycauayan-Obando River System (MMORS). Aerosols were collected on May 2016 during the same time that water samples were collected. Elemental analysis was conducted using a scanning electron microscope coupled with energy dispersive x-ray (SEM-EDX). Carbon (C), nitrogen (N), oxygen (O), sodium (Na), magnesium (Mg), aluminum (Al), silicon (Si), sulfur (S), chlorine (Cl), potassium (K), calcium (Ca), titanium (Ti), manganese (Mn), iron (Fe), copper (Cu), zinc (Zn), bromine (Br), niobium (Nb), barium (Ba), mercury (Hg), and lead (Pb) concentrations were measured and used as inputs in Principal Component Analysis (PCA). The aerosol samples showed the presence of heavy metals Pb and Hg, elements that were also detected in trace amounts in the water measurements. Concentrations of heavy metals Fe, Pb, Hg in the aerosols were attributed to industrial sources. However, it was determined that the primary source of aerosols in the area were traffic and crustal emissions (C, N, O, Si, Al, Ca). Thus, control of traffic emissions would be more beneficial in reducing aerosol emissions in Meycauayan.

Motivation: The visualization of biological data is a fundamental technique that enables researchers to understand and explain biology. Some of these visualizations have become iconic, for instance: tree views for taxonomy, cartoon rendering of 3D protein structures, or tracks to represent features in a gene or protein, for instance in a genome browser. Nightingale provides visualizations in the context of proteins and protein features. Results: Nightingale is a library of re-usable data visualization web components that are currently used by UniProt and InterPro, among other projects. The components can be used to display protein sequence features, variants, interaction data, 3D structure, etc. These components are flexible, allowing users to easily view multiple data sources within the same context, as well as compose these components to create a customized view. Availability: Nightingale examples and documentation are freely available at https://ebi-webcomponents.github.io/nightingale/. It is distributed under the MIT license, and its source code can be found at https://github.com/ebi-webcomponents/nightingale.

The increasing concern regarding climate change continues to motivate research in the Arctic. Within the delicate cycle of the cryosphere, leads are an important kinematic feature that regulate heat balances in the Arctic. Therefore, it is necessary to quantify the genesis of leads over time to identify when and where changes are occurring. The use of a principal component analysis (PCA) is one such tool that is used to identify the characteristics of seasonal ice variability. The PCA not only identifies “normal” or “dominant” conditions or features, but also extract anomalous spatial features from an archive of long-term sequence of images.

Oral drug absorption is the primary route for drug administration. However, this process hinges on multiple factors, including the drug’s physicochemical properties, formulation characteristics, and gastrointestinal physiology. Given its intricacy and the exorbitant costs associated with experimentation, the trial-and-error method proves prohibitively expensive. Theoretical models have emerged as a cost-effective alternative by assimilating data from diverse experiments and theoretical considerations. These models fall into three categories: data-driven models, encompassing classical pharmacokinetics, quantitative-structure models (QSAR), and machine/deep learning. Mechanism-based models include quasi-equilibrium, steady-state, and physiologically based pharmacokinetics, alongside first principles such as molecular dynamics and continuum models. This review provides an overview of recent modeling endeavors across these categories, evaluating their respective advantages and limitations. Additionally, a primer on partial differential equations and their numerical solutions is included in the supplementary materials, recognizing their utility in modeling physiological systems despite their mathematical complexity limiting their widespread application in this field.

This study aimed to use spatiotemporal tensor data to measure the level of employment quality in China's provinces and analyzed the magnitude and direction of its influencing factors in the spatiotemporal dimension. Taked 30 provinces, autonomous regions and municipalities directly under the central government in China from 2011 to 2020 as the research object, the employment quality evaluation system was constructed from six dimensions of employment environment, employment status, employability, labor remuneration, social security, and labor relations. The employment quality index data was expressed as a three-order high-dimensional tensor spatio-temporal data form, and the employment quality of China's provinces was measured from the spatio-temporal perspective by using principal tensor analysis, and the visual analysis of the development and change process of employment quality was carried out. The spatial autocorrelation analysis of employment quality was carried out, and the time-space dual fixed effect model of the spatial Dubin model was selected to analyze the direction and magnitude of the influence factors of employment quality on itself and its neighboring provinces. The research showed that: (1) The overall level of employment quality in China was not high and the employment quality varies greatly among provinces, and the employment quality development gap among provinces showed a trend of widening. (2) The development of employment quality in western China was relatively fast, while the development of employment quality in central China showed insufficient stamina. (3) Sichuan Province had a strong radiation effect on the development of employment quality in neighboring provinces, and Beijing and Tianjin had a strong siphon effect on the development of employment quality in neighboring provinces. (4) The level of industrialization and informatization promoted the development of employment quality in China's provinces, while the industrial structure had a significant negative effect on the development of employment quality.

The material flow dynamic and velocity distribution on the melted domain surface play a crucial role on the joint quality and formation of welding defects. In this study, authors investigated the effects of the low and high currents of plasma arc welding on the material flow and thermodynamics of molten pool and its relationship to the welding defects. The high-speed video camera (HSVC) was used to observe the convection of the melted domain and welded-joint appearance. Furthermore, to consider the Marangoni force activation, the temperature on the melted domain was measured by a thermal HSVC. The results revealed that the velocity distribution on the weld surface was higher than that inside the molten weld pool due to the difference of the massive density between the air and the steel. Moreover, in the case of low welding current (80A) the convection speed of molten was faster than that of the high welding current case (160A) owing to the difference of main driving forces direction and strength, which leading to undercut and humping defects on the weld surface and excessive convex (burn-through) defect at the bottom weld side, respectively. The medium welding current (120A) had two convection patterns with the main flow in backward direction, which resulted in better welding quality without defect. The interaction between the shear force and Marangoni force played a solid state on the convection and heat transportation processes in the plasma arc welding process.

With the deterioration of the bridge performance and ever-increasing amount of traffic, the bridge safety is becoming a concern for engineering community. A method that can assess the bridge's condition in real-time is urgently needed. The main factors that hinder the bridge condition assessment are the uncertain operational environments. A new moving principal component analysis (MPCA) based method is developed for structural damage detection of bridges in operational environments in this paper. Two main operational environmental factors: the environmental temperature and traffic loads, are studied in the assessment process to verify the robustness and practicality of the proposed method. The numerical and experimental results show that the proposed method is effective and accurate to assess the bridge condition in operational environments.

Small Shallow Lakes (SSL) support exceptionally high and original biodiversity, providing numerous ecosystem services. Their small size makes them especially sensitive to anthropic activities, that causes a shift to dysfunctional turbid states and induces loss of services and biodiversity. In this study we investigated the relationships between environmental factors and macrophyte communities. Macrophytes play a crucial role in maintaining functional clear states. Better understanding factors determining the composition and richness of aquatic plant communities in least-impacted conditions may be useful to protect them. We inventoried macrophyte communities and collected chemical, climatic and morphological data from 89 least-impacted SSL widely distributed in France. SSL were sampled across four climatic ecoregions, various geologies and elevations. Hierarchical cluster analysis showed a clear separation of four macrophyte assemblages strongly associated with mineralisation. Determinant factors identified by db-RDA analysis are, in order of importance, geology, distance from source (DIS, a proxy for connectivity with river hydrosystems), surface area, climate and hydroperiod (water permanency). Surprisingly, at country-wide scale, climate and hydroperiod filter macrophyte composition weakly. Geology and DIS are the major determinants of community composition, whereas surface area determines floristic richness. DIS is identified as determinant in freshwater lentic ecosystems for the first time.

This research described the fundamental inspiration behind the implementation of a humanistic approach to the principal's leadership and the steps of the principal's humanistic approach that have an impact on optimizing the implementation of the program for strengthening character education. This research used a qualitative approach, a case study design. The data collection was performed through in-depth interviews, participant observation, and documentation studies to achieve the research objectives. Data analysis used a modified analytic analysis method. The level of credibility, transferability, dependability, and confirmability was the basis of data validity. The research findings explained that personal excellence (integrity, wholeness, and self-authenticity) and the humanistic spirituality of inspirational figures inspired the principal’s humanistic approach. In addition, the application of the principal's humanistic approach had adequate impacts on optimizing the implementation of a program for strengthening character education and influenced the strengthening of the student's character. Through the principal's humanistic approach, school becomes an environment for empowering the character of the students.

In marine ecosystems communication among microorganisms is crucial since the distance is significant if considered on a microbial scale. One of the ways used by microorganism cells to reduce this gap is the production of extracellular vesicles. Marine bacteria release extracellular vesicles (EVs), small membrane-bound structures of 50 to 250 nm diameter, into their surrounding environment. The vesicles contain various cellular compounds, including lipids, proteins, nucleic acids, and glycans. EVs may mediate the communication between microorganisms in aquatic environments thus influencing ecosystem function and determining the structure and composition of microbial populations. This review will focus on marine bacterial EVs analysing their structure, composition, functions, and applications.

Cows produce saliva in very large quantities to lubricate and facilitate food processing. Estimates indicate an amount of 50-150 liter per day. Human saliva has previously been found to contain numerous antibacterial components, such as lysozyme, histatins, members of the S-100 family and lactoferrin to limit pathogen colonization. Cows are dependent of a complex microbial community in their digestive system for food digestion. We wondered how this would influence the content of their saliva. We therefore sampled saliva from five humans and both nose secretions and saliva from six cows and separated the saliva on SDS-PAGE gradient gels and analyzed the major protein bands by LC-MS/MS. The cow saliva was found to be dominated by a few major proteins only, the carbonic anhydrase 6, a pH stabilizing enzyme, and the short palate, lung and nasal epithelium carcinoma-associated protein 2A (SPLUNC2A), also named bovine salivary protein 30kDa (BSP30). This latter protein has been proposed to play a role in local antibacterial response by binding bacterial lipopolysaccharide (LPS) and inhibit bacterial growth, but may instead according to more recent data instead have primarily surfactant activity. Numerous peptide fragments of mucin-5B were also detected in the MS analysis. However, mucins stain poorly by the gel staining solution and they are large and have difficult to enter regular gels why their presence easily are overseen. Interestingly, no major band on gel was detected representing any of the antibacterial proteins indicating that cows may produce them at very low levels not to harm the microbial flora of their digestive system. The nose secretions of the cows primarily contained the odorant protein, a protein thought to be involved in enhancing the sensing of smell by the olfactory receptors to enhance the possibility to quickly sense potential poisonous food components. High levels of secretory IgA was also found in one sample of cow mouth drippings indicating a strong upregulation during an infection. The human saliva we more complex containing both secretory IgA, amylase, carbonic anhydrase 6, lysozyme, histatins and a number of other less abundant proteins.

A novel approach to the remote-control system for the compact multi-crystal energy-dispersive spectrometer for x-ray emission spectroscopy (XES) applications has been developed. This new approach is based on asynchronous communication between software components and on reactive design principles. In this paper, we identify the challenges we have faced, our solution to them as well as the implementation and future development prospects. The main motivation of this work was the development of a new holistic communication protocol that can be implemented to control various hardware components.

Thermal and catalytic pyrolysis of virgin low-density polyethylene (LDPE), high-density polyethylene (HDPE), polypropylene (PP) and mixtures of LDPE/PP were carried out in a 200 ml laboratory scale batch reactor at 460 °C in a nitrogen atmosphere. Thermogravimetric analysis (TGA) was carried out to study the thermal and catalytic degradation of the polymers at a heating rate of 10 °C/min. The amount of PP was varied in the LDPE/PP mixture to explore its effect on the reaction. In thermal degradation (TGA) of LDPE/PP blends, a lower decomposition temperature was observed for LDPE/PP mixtures compared to pure LDPE, indicating interaction between the two polymer types. In the presence of a catalyst (CAT-2), the degradation temperatures for the pure polymers were reduced. The TGA results were validated in a batch reactor using PP and LDPE respectively. Thermal cracking results showed that the oil product contains a significant amount of gasoline (C7 − C12) and diesel (C13 − C20) hydrocarbon fractions. The catalyst enhanced cracking at lower temperatures and narrowed the hydrocarbon distribution in the oil towards the gasoline range fraction (C7 – C12). The result suggests that the oil produced from catalytic pyrolysis of waste plastics has a potential as an alternative fuel.

Aquaculture contributes to the sustainable development of food security, marine resource conservation, and economy. Shifting aquaculture feed from fish meal and oil to terrestrial plant-derivatives may result in cost savings. However, many carnivorous fish cannot be sustained on plant-derived materials, necessitating the need for the identification of important factors for farmed fish growth and to investigate whether components derived from terrestrial plants can be used in feed. Herein, we focused on the carnivorous fish leopard coral grouper (P. leopardus) to identify the essential growth factors and clarify their intake timing from feeds. Furthermore, we evaluated the functionality of starch, which are easily produced by terrestrial plants. Results reveal that carbohydrates, which are not considered essential for carnivorous fish, can be introduced as a major part of artificial diet. The development of artificial feed using starch offers the possibility of increasing the growth of carnivorous fish in aquaculture.

Hydrogen has a leading role in accomplishing a net zero green-house gas emission future. Today’s challenge is producing green hydrogen to cover the fuel demand of transportation and industry, to gain independence from fossil fuels. This review’s goal is to demonstrate critically the existing methods of biomass treatment and assess their ability to scale up. Biomass is an excellent hydrogen carrier and biomass-derived processes are the main target for hydrogen production as it is an innovative pathway to green hydrogen production. Comparing the existing processes, thermochemical treatment is found to be far more evolved than biological or electrochemical treatment especially with regard to scaling prospects.

Currently, the use of numerical models for reproducing the landscape evolution of a river basin is part of the day-by-day research activities of fluvial engineers and geomorphologists. However, despite landscape modelling is based on a rather long tradition, and scientists and practitioners are trying to schematize the processes involved in the evolution of a landscape since decades, there is still the need for improving both the knowledge of the physical mechanisms and their numerical coding. The present review focuses on the first aspect, discussing the main components of a landscape evolution model and their more common schematizations, presenting possible open questions to be addressed towards an improvement of the reliability of such kind of models in describing the fluvial geomorphology.

The up-to-date challenge towards clean road transport are non-exhaust emissions. Important advances regarding measurement systems, including well defined characterisation techniques, as well as regulation, will happen in the next few years. In this work we present detailed results of particle emissions from a test bed for wheel suspension and brakes, consisting of aerosol (size distribution, particle number (PN) and mass (PM)) and electron microscopy measurements (EM) under different load conditions. Standard tyres and brakes from series production were tested with a high-load driving cycle while particle measurements were conducted by gravimetric measurements and with a TSI SMPS, a TSI APS and a GRIMM OPS. Furthermore, samples were analyzed by electron microscopy. A bimodal particle size distribution (PSD) was obtained with the SMPS, with peaks at 20nm and around 400nm. EM analysis of >1400 single particles from the electrostatic sampler matches the PSD results. EM analysis also showed ultrafine particles, mainly from O, Fe, Si, Ba, Mg and S and also fractal particles with high C fractions. Our results suggest, in agreement with previously published literature, that particulate emissions are related to brake disc temperature and occur in significant amounts above a threshold temperature.

Revenue-sharing (RS) contracts are a common approach to incentivize innovation of upstream suppliers by addressing the uneven profit distribution between upstream and downstream firms. Considering the possible overconfidence characterizing decision makers in the supply chain, we investigate the effect of the RS contract and the tendency of overconfidence of supply chain members on the investment in R&D of key components of products in the context of an upstream supplier that is the leader in the R&D and production of key components. We find that regardless of the bargaining power of either party, a RS contract can increase the R&D investment in key components. Regarding the effects of overconfidence of either downstream manufacturer or up-stream supplier, it can increase the R&D investment in key components. Supplier (manufacturer) overconfidence can harm their own profits but increase the profits of the manufacturer (supplier), and when the level of overconfidence is below a certain threshold, the damage to their own profits is less than the increase in each other's profits, thus benefiting the whole supply chain. In addition, we also find a joint effect of RS contracts and overconfidence: when the bargaining power of the supplier is low, the RS contract has a certain compensatory effect on the loss of their own profits caused by overconfidence.

When there is uncertainty in the value of parameters of the input random components of a stochastic simulation model, two-level nested simulation algorithms are used to estimate the expectation of performance variables of interest. In the outer level of the algorithm (n) observations are generated for the parameters, and in the inner level (m) observations of the simulation model are generated with the value of parameters fixed at the value generated in the outer level. In this article, we consider the case in which the observations at both levels of the algorithm are independent, showing how the variance of the observations can be decomposed into the sum of a parametric variance and a stochastic variance. Next, we derive central limit theorems that allow us to compute asymptotic confidence intervals to assess the accuracy of the simulation-based estimators for the point forecast and the variance components. Under this framework, we derive analytical expressions for the point forecast and the variance components of a Bayesian model to forecast sporadic demand; and we use these expressions to illustrate the validity of our theoretical results by performing simulation experiments using this forecast model.

Exogenous miRNAs derived from dietary substances have been shown to be orally transferred to the mammalian system and proven to remain active to regulate host-gene expression. This way they have become an active area of research as functional food components and aspects for dietary supplementation. They are being studied as a new class of metabolically targeted therapeutics that work through diet manipulation and may hold promise for a therapeutic approach in reducing the risk of life-threatening diseases. However, a substantial amount of evidence also defies this dietary miRNA concept in terms of their absorption, bioavailability, cellular uptake and its physiological effects in the mammalian system. But recent advances in the identification of some unique sequence and structural characteristics of dietary miRNAs and a deeper understanding of their stability in host peripheral blood for its cellular uptake have strengthened the whole concept. The review comprehensively summarizes the mechanism for miRNA extracellular transport, absorption through the gastrointestinal tract (GI), stability in peripheral blood, and cellular uptake in mammalian cells. It recapitulates the shreds of evidence, related to the influence of dietary miRNAs on gene expression based on the source of the origin (plant vs animal), and compares their cross-kingdom behaviour in terms of their unique sequence and stem-loop structure properties that help them to get stabilized in the mammalian system. The review also summarizes the parameters required for maintaining the sustainable uptake and bioavailability of the dietary miRNAs with existing examples of successful in-vivo and in-vitro delivery of dietary miRNA for augmented therapy. Lastly, it provides an overview of the available and required databases, webserver, and tools that can be used for the successful identification of potential dietary miRNA candidates.

Reassessment of the fatigue life for wind turbines structural components is typically performed using deterministic methods with the same partial safety factors as used for the original design. However, in relation to life extension, the conditions are generally different from the assumptions used for calibration of partial safety factors; and using a deterministic assessment method with these partial safety factors might not lead to optimal decisions. In this paper, the deterministic assessment method is compared to probabilistic and risk-based approaches, and the economic feasibility is assessed for a case wind farm. Using the models also used for calibration of partial safety factors in IEC61400-1 ed. 4 it is found that the probabilistic assessment generally leads to longer additional fatigue life than the deterministic assessment method. The longer duration of the extended life can make life extension feasible in more situations. The risk-based model is applied to include the risk of failure directly in the economic feasibility assessment and it is found that the reliability can be much lower than the target for new turbines, without compromising the economic feasibility.

Nucleolin is an RNA binding protein that is involved in many post-transcriptional regulation steps of messenger RNAs in addition to its nucleolar role in ribosomal RNA transcription and assembly in pre-ribosomes. Acetylated nucleolin was found to be associated with nuclear speckles and to co-localize with the splicing factor SC35. Previous nuclear pull down of nucleolin identified several splicing components and factors involved in RNA polymerase II transcription associated with nucleolin. In this report, we show that these splicing components are specifics of the pre-catalytic A and B spliceosomes, while proteins recruited in the Bact, C and P complexes are absent from the nucleolin interacting proteins. Furthermore, we show that acetylated nucleolin co-localized with P-SF3B1, a marker of co-transcriptional active spliceosomes. P-SF3B1 complexes can be pulled down with nucleolin specific antibodies. Interestingly, the alternative splicing of Fibronectin at the IIICS and EDB sites was affected by nucleolin depletion. These data are consistent with a model where nucleolin could be a factor bridging RNA polymerase II transcription and assembly of pre-catalytic spliceosome similarly to its function in the co-transcriptional maturation of pre-rRNA.

Keywords: Antibacterial activity, Antioxidant activity, Bioactive compounds, Elementary analysis, Nutritional and phytochemical composition, Seaweed.

The fixed and random effects models are popular methods for identifying the causal effects of treatment. First, I introduce the two-way fixed effects model and show a class of the estimators for the random effects models. Misidentification may occur in these models due to the treatment effect heterogeneity. Then, I propose the differential error component models to address such problems while the models exclude the fixed effects of units and time periods and consider the random effects of units and time periods. Meanwhile, I present a simulation of a staggered design and revisit the application in (De Chaisemartin and D'Haultfoeuille, 2020). The results demonstrate that one additional newspaper increases the 0.31% average effect of the presidential turnout and the 1.05% average effect when the newspapers’ changes are non-negative, where the proposed estimators are robust and efficient.

Techniques for the controlled seeding and growth of cracks are urgently required for non-destructive testing technique evaluation, particularly for additive manufactured (AM) samples. This paper describes a method which uses a combination of tensile load and resonance excitation of notched AM samples, with in-situ monitoring of the resonance frequency serving to track crack dimensions. Mechanical low-cycle fatigue cracks, ranging in length from ~0.3 mm to ~5 mm, are successfully created in five AM samples using this technique. The samples are non-destructively characterized using optical microscopy and Nonlinear Resonance (NLR) testing. The exploitation of resonance enables the concentration of a significant number of stress cycles on the samples in much shorter timespans than conventional fatigue testing, enabling high throughput, while utilising compact components. Furthermore, the tracking of resonance frequency shift throughout the process enables non-invasive and non-contact real-time condition monitoring.

The paper investigated the components of savings accumulation in Nigeria over the period 1980 to 2017. Secondary data were collated from World Development Index (WDI). In evaluating the objectives, the study employed the Auto Regressive Distributive Lag (ARDL) and Vector Error Correction Model (VECM) estimation methods. The key findings of the study show that the components of savings identified in literature understudied in the paper specifically, GDP per capita, foreign direct investment, financial deepening, interest rate, inflation rate exchange rate significantly influence savings accumulation in Nigeria either in short run, long run or both. Financial deepening was found statistically significant but influences savings negatively. Inflation rate was statistically insignificant although negative. The result from the VECM causality test revealed that short run and long run causal relationship exist between savings and the afore mentioned components in Nigeria. Hence, the study recommends careful manipulation of the identified savings components in a manner that they will not yield a counterproductive result in the economy rather contribute to the growth of savings and ultimately, the growth of Nigeria economy as a whole. It further recommends that the Nigerian government through its financial institutions encourage savings from both small and big savers which to large extent will assuage the perceived undeserved influence of financial deepening on savings accumulation.

Ionospheric delay has been a critical issue that limits the accuracy of GNSS precise positioning and navigation for single-frequency users, especially in mid- and low-latitude regions where irregularity of ionosphere is often significant. Kriging spatial interpolation techniques have been recently introduced to model the spatial correlation and variability of ionosphere, which intrinsically assume that the ionosphere field is stochastically stationary but does not take the random observational errors into account. In this paper, by treating the spatial statistical information on ionosphere as prior knowledge and based on TEC semivariogram analysis, we use Kriging techniques to spatially interpolate TEC values. By assuming that the stochastic models of both the ionospheric signals and measurement errors are only known up to some unknown factors, we propose a new Kriging spatial interpolation method with unknown variance components for both the signals of ionosphere and TEC measurements. Variance component estimation has been integrated with Kriging to reconstruct regional ionospherical delay. The method has been applied to data from the Crustal Movement Observation Network of China (CMONOC) and compared with the ordinary Kriging and polynomial interpolations with spherical cap harmonic functions, polynomial functions and low-degree spherical harmonic functions. The results have shown that the interpolation accuracy of the new proposed method is better than the ordinary Kriging and polynomial interpolation by about 1.2 TECU and 0.7 TECU, respectively. The root mean squared error of the proposed new Kriging with variance components is within 1.5 TECU and is smaller than those from other methods under comparison by about 1 TECU. When compared with ionospheric grid points, the mean squared error of the proposed method is within 6 TECU and smaller than Kriging, indicating that the proposed method can produce more accurate ionospheric delays and better estimation accuracy.

This paper offers a comprehensive examination of the process involved in developing and automating supervised end-to-end machine learning workflows for forecasting and classification purposes. It offers a complete overview of the components (i.e. feature engineering, model selection, etc), principles (i.e. bias-variance decomposition, model complexity, overfitting, model sensitivity to feature assumptions and scaling, output interpretability, etc), models (i.e. neural networks, regression models, etc), methods (i.e. Cross-Validation, data augmentation, etc), metrics (i.e. Mean Squared Error, F1-score, etc) and tools that rule most supervised learning applications with numerical and categorical data, as well as their integration, automation, and deployment. The end goal and contribution of this paper is the education and guidance of the non-AI expert academic community over complete and rigorous machine learning pipelines and data science practices, from problem scoping to design and state-of-the-art automation tools, including basic principles and reasoning in the choice of methods. The paper delves into the critical stages of supervised machine learning workflow development, many of which are often omitted by researchers due to brevity, and covers foundational concepts essential for understanding and optimizing a functional machine learning workflow, thereby offering a holistic view of task-specific application development for applied researchers who are not AI experts.

There is a great interest in finding antioxidants and products with antimicrobial activities from natural sources. The aim of this study was to obtain and identify the phenolic components and organic acids from Camellia oleifera cake. In addition, their antioxidant and antimicrobial activities were also investigated. The purity of phenolic components and organic acids obtained were 94.1 ± 0.5% w/w and 96.0 ± 0.3% w/w, respectively. There are 15 phenolic components have been detected and identified by HPLC-ESI-MS. Oxalic, citric, acetic, malic, and succinic acids are found to be major organic acids. The phenolic components and organic acids both had good antioxidant capacity, evaluated by 4 antioxidant activity assays (hydroxyl radical scavenging, superoxide radical scavenging, 1,1-diphenyl-2-picryl-hydrazyl radical scavenging and lipid peroxidation inhibition). In addition, the phenolic components and organic acids exhibited significant inhibitory activity against bacteria Staphylococcus aureus, Escherichia coli, Bacillus subtilis, and fungi Mucor racemosus, Aspergillus oryzae, Rhizopus stolonifer. The phenolic components and organic acids from C. oleifera cake both showed good antioxidant capacity and exhibited antimicrobial activities. These results may be useful for the future use of phenolic components and organic acids from C. oleifera cake.

Prostate cancer (Pca) is a highly heterogeneous disease and the second more common tumor in males. Molecular and genetic profiles have been used to identify subtypes and guide therapeutic intervention. However, roughly 26% of primary Pca are driven by unknown molecular lesions. We use Principal Component Analysis (PCA) and custom RNAseq-data normalization to identify a gene expression signature which segregates primary PRAD from normal tissues. This Core-Expression Signature (PRAD-CES) includes 33 genes and accounts for 39% of data complexity along the PC1-cancer axis. The PRAD-CES is populated by protein-coding (AMACR, TP63, HPN) and RNA-genes (PCA3, ARLN1) sparsely found in previous studies, validated/predicted biomarkers (HOXC6, TDRD1, DLX1), and/or cancer drivers (PCA3, ARLN1, PCAT-14). Of note, the PRAD-CES also comprises six over-expressed LncRNAs without previous Pca association, four of them potentially modulating driver’s genes TMPRSS2, PRUNE2 and AMACR. Overall, our PCA capture 57% of data complexity within PC1-3. GO enrichment and correlation analysis involving major clinical features (i.e., Gleason Score, AR Score, TMPRSS2-ERG fusion and Tumor Cellularity) suggest that PC2 and PC3 gene signatures might describe more aggressive and inflammation-prone transitional forms of PRAD. Of note, surfaced genes may entail novel prognostic biomarkers and molecular alterations to intervene. Particularly, our work uncovered RNA genes with appealing implications on Pca biology and progression.

Urgent environmental challenges and emerging additive manufacturing (AM) technologies push research towards more performant and new materials. In the field of metallurgy, high entropy alloys (HEAs) have recently represented a topic of intense research because of their promising properties, such as high temperature strength and stability. Moreover, this class of multi-principal element alloys (MPEAs) have opened up researcher community to unexplored compositional spaces, making prosper literature of high-throughput methodologies and tools for rapidly screening large number of alloys. However, none of the methods has been aimed to design new MPEAs for AM process known as selective laser melting (SLM) so far. Here we conducted nanoindentation testing on single scan tracks of elemental powder blends and pre-alloyed powders after ball milling of AlTiCuNb and AlTiVNb. Results show that nanoindentation can represent an effective technique to gain information about phase evolution during laser scanning, contributing to accelerate the development of new MPEAs.

A tumbler screen type residual film–impurity mixture wind separator as a key equipment for secondary utilization of farmland residual film. During the working process, the proportion of impurities in the separated waste mulch film intermittently increases, resulting in poor working stability of the device, which may hamper long-term operation. In this study, the material inside the separation unit was continuously monitored, and the main factor affecting separator per-formance was determined to be the challenges in the effective depolymerization of some residual film–impurity mixtures. The principles of agglomeration and depolymerization of the residual film–impurity mixtures were analyzed using computational fluid dynamics (CFD) and discrete element method (DEM) flow-solid coupling simulation methods. The key factor affecting the disaggregation of the mixture was the collision force between the residual film–impurity mixture and the trommel screen. The collision force was maximum when the residual film–impurity mixture first collided with the trommel screen when it was fed into the separation device. As determined by force analyses, the key factors affecting the collision force of the process were the material feeding amount and the structure of the inlet. Furthermore, simulations were carried out for different inlet structure forms; the evaluation index was the maximum collision force of the residual film–impurity mixture agglomerate on the trommel screen. The best disaggregation effect was obtained with a square feed inlet and at a feeding rate of 202 kg/h. A prototype was built using these specifications for verification. The average value of the ratio of impurities in the re-sidual film was 6.966%, the coefficient of variation was 7.38%, and the dispersion of statistical results was small. The ratio of impurities in the residual film was kept constant during the con-tinuous operation of the wind separator. Thus, this study analyzed the agglomerate disaggregation process and provided theoretical insights for deter-mining the optimal structures of the inlets of various cleaning devices and the feeding volumes.

Through the ACE2, a main enzyme of the renin-angiotensin system (RAS), the SARS-CoV2 gains access into the cell, resulting in different complications which may extend beyond the RAS and impact the Arachidonic Acid (ArA) pathway. The contribution of the RAS through ArA pathways metabolites in the pathogenesis of COVID-19 is unknown. We investigated whether RAS components and ArA metabolites can be considered biomarkers of COVID-19. We measured the plasma levels of RAS and ArA metabolites using an LC-MS/MS. Results indicate that Ang1-7 levels were significantly lower, whereas Ang II levels were higher in the COVID-19 patients than healthy control individuals. The ratio of Ang1-7/Ang II as an indicator of the RAS classical and protective arms balance was dramatically lower in COVID-19 patients. There was no significant increase in inflammatory 19-HETE and 20-HETE lev-els. The concentration of EETs was significantly increased in COVID-19 patients, whereas the DHETs concentration was repressed. Their plasma levels were correlated with Ang II concentration in COVID-19 patients. In conclusion, evaluating the RAS and ArA pathway biomarkers could provide helpful information for the early detection of high-risk groups, avoid delayed medical attention, facilitate resource allocation and improve patient clinical outcomes to prevent long COVID incidence.

The paper is a follow-up of a previous investigation and effort to develop the ontology of the smart city (Komninos, N., Bratsas, C., Kakderi, C., and Tsarchopoulos, P. "Smart city ontologies: Improving the effectiveness of smart city applications". Journal of Smart Cities, vol. 1(1), 1-17. https://www.komninos.eu/wp-content/uploads/2015/07/2015-Smart-City-Ontologies-Published.pdf). Since the publication of this article in 2015, research and literature on smart cities have evolved significantly, as have the technologies for digital spaces and applications that support city functions. These developments are reflected in the present form of the smart city ontology 2.0 we propose. It depicts the building blocks of the smart city ontology (technologies, structure, function, planning), and the object properties and data properties that connect structural blocks and classes. The aim of the SCO 2.0 is to provide a better understanding and description of the smart/intelligent city landscape; identify the main components and processes, the terms used to describe them, their definition and meaning; clarify key processes related to the integration of the different dimensions of the smart city, mainly the physical, social, and digital dimensions. The paper is accompanied by an owl file, developing the ontology through the editor Protégé.

Coronavirus disease 2019 (COVID-19) is a global pandemic caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). To contain the virus, numerous preventive measures have been taken including isolation of patients, careful infection control, social distancing, and taking vaccine. So far, new confirmed and death cases are still increasing. SARS-CoV-2 invades cells by using the angiotensin converting enzyme 2 (ACE2). ACE2 is an essential enzyme of the renin-angiotensin system (RAS) which converts angiotensin II (Ang II) to angiotensin (1-7). ACE2 is expressed in different organs, including lung, heart, and kidney. A high number of COVID-19 patients developed kidney injury has been reported. Renal impairment and acute injury are associated with mortality of COVID-19, which is 14-16 times higher than other general patients. Acute Kidney Injury has been occured in 2.9 up to 43% of intensive care unit patients. The increasing evidence show that the components of RAS can activate the complement cascade, and cytokines production. Kidney injury caused by SARS-CoV-2 is related mainly to systemic and local inflammation. Moreover, the uncontrolled immune responses mediated by SARS-CoV-2 including hypercytokinaemia, secondary hemophagocytic lymphohistiocytosis, antibody dependent enhancement, complement system, and phagocytic cells activation can contribute in the virus pathogenesis leading to associated renal dysfunction. However, the role and crosstalk between of RAS components and immune response in mediating kidney injury remain undefined. In this review, we focus on the recent studies to provide the pathogenesis of SARS-CoV-2 interacting with RAS and immune responses to mediate kidney injury.

Metal additive manufacturing (AM) has gained much attentions in recent years due to its advantages including geometric freedom and design complexity, appropriate to a wide range of potential industrial applications. However, conventional metal AM methods have high-cost barriers due to the initial cost of the capital equipment, support and maintenance, etc. This study presents a unique low-cost metal material extrusion (MME) technology. The filaments used have polylactic acid (PLA) as the matrix and metal powders (copper, bronze, stainless steel, high carbon iron, and aluminum) as reinforcements. Using the proposed fabrication technology, test specimens were built by extruding polymer/metal composite filaments, which were then sintered in an open-air furnace to produce solid metallic parts. In this research, the mechanical and thermal properties of the built parts are examined using tensile tests, thermogravimetric-, thermomechanical- and microstructural analysis.

Regular inspections during construction work verify that the work completed is consistent with the plans and specifications and ensure that it is within the planned time and budget. This requires frequent physical site observations to independently measure and verify the completion percentage of the construction progress performed over periods of time. The current computer vision-based (CV) techniques for the measurement of as-built elements, predominantly use 3D laser scanning or 3D Photogrammetry modelling to determine the geometrical properties of as-built elements on construction sites. Both techniques require data acquisition from several positions and angles to generate sufficient information about the element’s coordinates making the deployment of these techniques on dynamic construction project sites a challenging task. In this paper, we propose a pipeline for automating the measurement of as-built components using artificial intelligence (AI) and computer vision (CV) techniques. The pipeline requires a single image obtained with a stereo-camera system to measure the size of selected objects or as-built components. We demonstrate our approach by measuring the size of concrete walls and columns. The novelty of this work is attributed to the fully automated CV-based method for measuring any given element using a single image only. The proposed solution is suitable for use in measuring the sizes of as-built components of built assets. It has the potential to be further developed and integrated with BIM models for use on construction projects for progress monitoring.

Coffee is not only a delicious beverage but also an important dietary source of natural antioxidants. We live in an oxidative world where it is impossible to avoid pollution, stress, food additives, radiation, and other sources of oxidants that eventually lead to severe health disorders. Fortunately, there are chemicals in our diet that counteract the hazards posed by the reactive species that trigger oxidative stress. They are usually referred to as antioxidants; some of them can be versatile compounds that exert such a role in various ways. This review summarizes, from a chemical point of view, the antioxidant effects of relevant molecules found in coffee. Their ways of action and trends in activity are analyzed, considering the data gathered so far from both theory and experiments. The influence of the media and pH in aqueous solution, and structure-activity relationships are discussed. The protective role of the explored compounds is examined. A particular section is devoted to derivatives of some coffee components, and another one to their bioactivity. The data used in the analysis come from theoretical anc computational protocols, which have been proven to be very usefull in this context. Hopefully, the information provided here will promote further investigations into the amazing chemistry contained in our morning cup.

Coffee is not only a delicious beverage but also an important dietary source of natural antioxidants. We live in an oxidative world where it is impossible to avoid pollution, stress, food additives, radiation, and other sources of oxidants that eventually lead to severe health disorders. Fortunately, there are chemicals in our diet that counteract the hazards posed by the reactive species that trigger oxidative stress. They are usually referred to as antioxidants; some of them can be versatile compounds that exert such a role in various ways. This review summarizes, from a chemical point of view, the antioxidant effects of relevant molecules found in coffee. Their ways of action and trends in activity are analyzed, considering the data gathered so far from both theory and experiments. The influence of the media and pH in aqueous solution, and structure-activity relationships are discussed. The protective role of the explored compounds is examined. A particular section is devoted to derivatives of some coffee components, and another one to their bioactivity. Hopefully, the information provided here will promote further investigations into the amazing chemistry contained in our morning cup.

Work from the last years indicate that the extracellular matrix (ECM) plays a direct role in vari-ous cellular processes including proliferation, migration and differentiation. Besides homeostat-ic processes, its regulatory function in inflammation becomes more and more evident. In in-flammation like inflammatory bowel disease, the ECM composition is constantly remodeled which can result in a structuring of fistulizing disease course. Thus, tracking early ECM changes might bear the potential to predict the disease course. In this review, we will provide an over-view of relevant diagnostic methods focusing on ECM changes.

In France, veterinarians are allowed to both prescribe and deliver drugs, a questioned situation from the perspective of antimicrobial use (AMU) reduction in order to ovoid AM resistance (AMR). This situation places veterinarians in direct commercial relationships with the pharmaceutical industry. The present study aims to describe contracts between pharmaceutical companies and veterinarians during the period 2008-2014. 382 contracts related to 47 drugs belonging to the 8 main pharmaceutical firms (2,320 observations) in France were collected. The price per unit after rebate (PUR) was calculated for each drug and contract. The descriptive analysis demonstrated a high disparity between the content of contracts and the way in which they are presented. A linear regression was then used to explain the PUR with the explanatory variables, which were the yearly purchase objective, the year, the type of drug and type of rebate. The decrease in PUR for each extra €1,000 objective per drug category was established to be €0.061 per 100 kg body weight (BW) for anticoccidiosis treatments, €0.029 per 100 kg BW for anti-inflammatories, €0.0125 per 100 kg BW, €0.0845 per animal for antiparasitics, and €0.031 per animal for intramammary antimicrobials. Applying agency theory shows that veterinarians can be considered the agents in case of monopolistic or oligopolistic situations of pharmaceutical firms, they are considered the principals otherwise. Policies that focus on maintaining veterinarians as principals may help reach the better societal benefit since this helps them maintain access to veterinary services throughout the region at low public cost while being liable for AMU.

Driven by environmental sustainability concerns, the integration of biobased components in curtain wall systems is gaining traction in both research and the construction market. This paper explores the development and validation of a bio-based façade system within the Basajaun H2020 project. The project aimed to demonstrate the feasibility of introducing environmentally friendly bio-based components into the mature curtain wall façade industry. The paper focuses on identifying technological solutions for replacing key components such as profiles, insulation, and the tightness system with bio-based and less environmental impact alternatives presenting the results achieved in the façade system design of the Basajaun project funded by European Union. These solutions aimed at creating a bio-composite-based curtain wall façade that adheres to current building envelope standards and normative; to implement diverse façade typologies for vision panels, opaque sections, and integrated windows; to engineer the prefabrication process for industrialization, enabling wider market replication and simplified transport and installation. The results demonstrate that the Basajaun façade successfully integrates selected components and meets the performance requirements set by regulations. However, questions remain regarding the workability of bio-based profiles as a commercially viable, ready-to-market solution that can replace traditional aluminum profiles in the curtain wall façade industry.

Work on callings has burgeoned in the past 20 years, yet recent reviews exposed a lack of conceptual clarity and disagreements around its definition, components and measures. One lingering point of contention revolves around the element of prosociality: Is a calling orientation primarily motivated by self-interest, prosocially orientated, or a mix of both? This conceptual paper reviews and examines the pro-self and prosocial component of a calling outlook, by examining and comparing the ways in which they feature in different calling subtypes: Classic, neoclassic, and modern callings. Our analysis suggests that these subtypes vary in where they are located on a pro-self – prosocial continuum: Classic callings are located on the prosocial side of the axis, modern callings are located on pro-self side of the axis, and neoclassic callings can be situated in the middle of the con-tinuum, integrating self-orientated and other-orientated motivations. Our analysis further suggests that these calling subtypes draw on divergent value systems: Classic callings are propelled by self-transcendent values, modern callings are driven by self-actualization motivations, and neoclassic callings integrate both value systems. We therefore argue that the subjective experiences of pursuing a calling within each subtype pathway differ, alt-hough they may culminate in similar outcomes. The paper offers a novel framework for analyzing people’s calling that draws on their values.

The phycobilisome (PBS) is the major light-harvesting apparatus in cyanobacteria and red algae, a large multi-subunit protein complex of several megadaltons that is found on the stromal side of thylakoid membranes in orderly arrays. Chromophore lyases catalyse the thioether bond between apoproteins and phycobilins of PBSs. Depending on the species, composition, spatial assembly and, especially, the functional tuning of different phycobiliproteins mediated by linker proteins, PBSs can absorb light between 450 and 650 nm, making them efficient and versatile light-harvesting systems. However, basic research and technological innovations are needed, not only to understand their role in photosynthesis but also to realise the potential applications of PBSs. Synthetic biology provides an innovative approach to expand our understanding of the distinctive properties that make the PBS such an efficient light-harvesting system and to explore its heterologous synthesis, photosynthetic functions and potential medical applications. Focusing on these topics, this review describes the essential components needed for PBS assembly, the functional basis of PBS photosynthesis and the applications of phycobiliproteins. Moreover, key technical challenges for heterologous biosynthesis of phycobiliproteins in chassis cells are discussed.

The tissue micro environment or milieu consists of a highly dynamic population of cellular and non-cellular components which constitute a complex regulatory network aimed at maintaining the organ homeostasis. In the modern medicine the discovery of miRNAs is undoubtedly a promising field of research and they are essential in orchestrating immune system logic and their release in the gut micro milieu can directly affect bacterial gene expression. Here, we briefly review the role of microRNAs, focuses on their role on immune system components in physiological and pathophysiological gut micro milieu.

Supramolecular solvent (SUPRAS) has received increasing interest as an innovative, efficient, and green solvent for the effective extraction and separation of bioactive compounds from natural resources. However, studies on the use of SUPRAS for the extraction of phenolic components from plants, which are highly valued in food products due to their excellent antioxidant capacity, are still lacking. The present study developed a green ultrasound-assisted and efficient SU-PRAS method to simultaneously determine three phenolic acids in Prunella vulgaris by high-performance liquid chromatography (HPLC) and the experimental parameters were optimized in detail. The efficiency and antioxidant properties of the phenolic compounds obtained by different extraction methods were also compared. Under the optimal conditions, the extraction efficiency of SUPRAS, prepared with octanoic acid reverse micelles dispersed in ethanol-water, was substantially higher than conventional organic reagents. Moreover, this SUPRAS method also showed more significant antioxidant capacities. The confocal laser scanning microscopy (CLSM) images presented the spherical droplet structure of SUPRAS (A well-defined circle), which coincided with the position of the fluorescence position of phenolic acids. The phenolic acids were encapsulated in the vesicles by the SUPRAS droplets, which indicated the efficient extraction capacities of SUPRAS for the target compounds. Finally, combined with the CLSM method, the mechanism of the proposed method was further clarified, and the superior extraction performance of SUPRAS was theoretically demonstrated through molecular dynamics simulations. In comparison with conventional methods, the higher extraction efficiency of SUPRAS can be illustrated by the larger solvent contact surface area, more types of hydrogen bonds between extractants and supramolecular solvents, and stronger and more stable interaction forces. The results of the theoretical studies are in rational agreement with the experimental outcome.

Machine learning (ML) is growing in popularity for various particle accelerator applications including anomaly detection such as faulty beam position monitor or RF fault identification, for non-invasive diagnostics, and for creating surrogate models. ML methods such as neural networks (NN) are useful because they can learn input-output relationships in large complex systems based on large data sets. Once they are trained, methods such as NNs give instant predictions of complex phenomenon, which makes their use as surrogate models especially appealing for speeding up large parameter space searches which otherwise require computationally expensive simulations. However, quickly time varying systems are challenging for ML-based approaches because the actual system dynamics quickly drifts away from the description provided by any fixed data set, degrading the predictive power of any ML method, and limits their applicability for real time feedback control of quickly time-varying accelerator components and beams. In contrast to ML methods, adaptive model-independent feedback algorithms are by design robust to un-modeled changes and disturbances in dynamic systems, but are usually local in nature and susceptible to local extrema. In this work, we propose that the combination of adaptive feedback and machine learning, adaptive machine learning (AML), is a way to combine the global feature learning power of ML methods such as deep neural networks with the robustness of model-independent control. We present an overview of several ML and adaptive control methods, their strengths and limitations, and an overview of AML approaches. A simple code for the adaptive control algorithm used here can be downloaded from: https://github.com/alexscheinker/ES_adaptive_optimization

The soybean aphid (SBA; Aphis glycines Matsumura) and the soybean cyst nematode (SCN; Heterodera glycines Ichninohe) are major pests of the soybean (Glycine max (L.) Merr.). Independent studies on these pests have made substantial progress in understanding the genetic basis of limiting these pests in both model and non-model plant systems. Classical linkage mapping and genome-wide association studies (GWAS) have identified some major and minor QTLs in soybean. The studies on interactions of aphid and nematode effectors with host proteins allow us to identify molecular cues in various signaling components, including plant disease resistance and phytohormone genes. Here we review various resistance components of both SBA and SCN in terms of their effectors, their role in eliciting or attenuating host defense and update on findings on key quantitative trait loci (QTLs)/genes in soybean that could help in mitigating these widespread shifted virulent soybean aphid and SCN populations. We also provide an update on recent interaction studies of soybean-soybean aphid-SCN as well as interaction studies involving different aphids/nematodes and their host systems. PHYTOALEXIN DEFICIENT4 (PAD4) in soybean could possibly play a major role in providing resistance against both soybean aphid and SCN.

Considering the manufacturing of automotive components, there exists a dilemma around the substitution of traditional Cast Iron (CI) with lighter metals. Nowadays, aluminium alloys, being lighter compared to traditional materials, are considered as a more environmentally friendly solution. However, the energy required for the extraction of the primary materials and manufacturing of components is usually not taken into account in this debate. In this study, an extensive literature review has been performed to estimate the overall energy required for the manufacturing of an engine cylinder block using (a) cast iron and (b) aluminium alloys. Moreover, data from over 100 automotive companies, ranging from mining companies to consultancy firms, have been collected in order to support the soundness of this investigation. The environmental impact of the manufacturing of engine blocks made of these materials is presented with respect to the energy burden; the “cradle-to-grave approach” has been implemented to take into account the energy input of each stage of the component lifecycle starting from the resource extraction and reaching to the end-of-life processing stage. Our results indicate that although aluminium components contribute towards reduced fuel consumption during their use phase, the vehicle distance needed to be covered in order to compensate for the up-front energy consumption related to the primary material production and manufacturing phases is very high. Thus, the substitution of traditional materials with lightweight ones in the automotive industry should be very thoughtfully evaluated.

The primary aim of this study is to investigate the relationship of the Mediterranean diet (MD) with metabolic syndrome (MetS) and its components in Caucasian subjects between 35 and 74 years. The secondary aim is to analyze sex differences. Methods: A cross‑sectional trial. This study utilized data from the EVA, MARK, and EVIDENT studies, a total of 3417 subjects with a mean age of 60.14±9.14 years (57% men). MetS was defined based on the Joint Scientific Statement National Cholesterol Education Program III. Waist circumference, blood pressure, fasting plasma glucose, and lipid profile were measured. Adherence to the MD was assessed with the 14-item Mediterranean Diet Adherence Screener (MEDAS) questionnaire used in the PREDIMED study. Good adherence was considered when the MD value was higher than the median value. Results: The mean value of the MEDAS questionnaire was 5.83±2.04; (Men 5.66±2.06 and women 6.04±1.99; p<0.001). Adherence to the MD was observed by 38.6% (34.3% men and 40.3% women; p<0.001). MetS was observed in 41.6% (39.0% men and 45.2%women p<0.001). In the multiple regression analysis after adjusting for possible confounders, the mean MD value showed a negative association with the number of MetS components per subject (β=-0.336), and with the different components of MetS: Systolic blood pressure (β=-0.011), Diastolic blood pressure (β=-0.029), glycemia (β=-0.009), Triglycerides (β=-0.004), Waist circumference (β=-0.026), except with the HDL-cholesterol value which showed a positive association (β=0.021); (p<0.001 in all cases). The adjusted logistic regression models showed that an increase in MDA decreases the probability of MetS (OR =0.56) and its components: blood pressure ≥130/85 mmHg (OR = 0.63), fasting plasma glucose ≥100 mg/dL (OR = 0.62); triglycerides ≥150 mg/dL (OR = 0.65); waist circumference ≥88 cm in women and ≥102 cm in men (OR = 0.74), and increases high-density lipoprotein cholesterol <40 mg/dL in men or <50 mg/dL in women (OR = 1.70); (p<0.001 in all cases). The results by sex were similar, both in multiple regression and logistic regression. Conclusion: The results of this study suggest that a greater adherence to the Mediterranean diet decreases the probability of presenting Mets globally and by sex.

Although Lov\'{a}sz introduced the graph exponential $G^K$ in 1967, this product has received little attention. This paper focuses on the number of components in $G^K$ when exponent $K$ is a complete graph $K_n$. For a connected bipartite $G$, when $K$ is $K_2$, $G^{K_2}$ has three components; and when $K$ is $K_n$ with $n>2$, $G^{K_n}$ produces $\lceil\frac{n+1}{2}\rceil$ components. A connected $G$ with an odd cycle produces one component in $G^{K_n}$.

With demand for the long-term continued use of existing building facilities, structural health monitoring and damage detection are attracting interest from society. Sensors of various types have been practically applied in the industry to satisfy this need. Among the sensors, piezoelectric sensors are an extremely promising technology by virtue of their cost advantages and durability. Although they have been used in aerospace and civil engineering, their application for building engineering remains limited. Remarkably, recent catastrophic seismic events have further rein-forced the necessity of rapid damage detection and quick judgment about the safe use of facilities. Faced with these circumstances, this study was conducted to assess the applicability of piezoelectric sensors to evaluate building components. Specifically, this study emphasizes structural damage caused by earthquakes. After first applying to cyclic loading tests to composite beam component specimens and steel frame subassemblies with a folded roof plate, the prospective damage posi-tions were also found using finite element analysis. Crack propagation and buckling locations were predicted adequately. The piezoelectric sensors provided output when the concrete slab showed tensile cracks, or when the folded roof plate experienced local buckling. Furthermore, damage expansion and progression were detected multiple times during loading tests. Results showed that the piezoelectric sensors can detect structural damage of building components, demonstrating their potential for use in inexpensive and stable monitoring systems.

In this article, an efficient die bonding technology based on silver sintering due to induction heating is presented. By using this technology, the heat for the sintering reaction is locally limited to the bonding area and the heating of the entire power module is avoided. Furthermore, the sintering reaction is promoted due to current flow between the silver particles and the sintering time is drastically reduced. Next to the experimental trials presented in this paper, FE-simulation methods were applied in order to develop a suitable induction coil geometry for the bonding of a diode to a direct bonded copper (DBC) substrate. Additional heating and sintering tests verified the reliability of the simulation model as well as the technological approach. Diodes were successfully bonded during the experiments and were analyzed by means of scanning electron microscopy (SEM) and function tests in order to qualify the inductive bonding technology. The results presented in this paper demonstrate, that induction heating has high potential for cost effective production in the field of die-attach and can drastically increase the output in power electronics production.