This longitudinal study aimed to analyze the effects of a team rowing-based training program on physical fitness and anthropometric parameters in female breast cancer survivors (n=40; 56.78±6.38 years). Participants were divided into two groups: one rowed in fixed seat rowing (FSR) boats (n=20; 56.35±4.89 years) and the other in sliding seat rowing (SSR) boats (n=20; 57.20±7.7 years). Both groups engaged in two 75-minute sessions per week for 24 weeks. Significant improvements were observed in both groups in resting heart rate (FSR: -10.65 bpm; SSR: -8.45 bpm), heart rate at the beginning of the 6-minute walk test (6MWT) (FSR: -10.7 bpm; SSR: -11.25 bpm), and heart rate at the end of the test (FSR: -13.85 bpm; SSR: -20.35 bpm). Blood pressure improved significantly in both diastolic blood pressure (FSR: -12.35 mmHg; SSR: -19.25 mmHg) and systolic blood pressure (FSR: -13 mmHg; SSR: -16.95 mmHg). Additionally, both groups increased the distance covered in the 6MWT (FSR: +63.05 m; SSR: +93.65 m). These results suggest that a rowing training program is a viable and safe activity for female breast cancer survivors, improving cardiac function, blood pressure, and cardiorespiratory capacity, particularly in sliding seat boats.

The definition of UTC in 1972 balanced the needs of the time and frequency community for a universal time scale that was traceable to the definition of frequency in the SI system of units with the needs of the astronomical community for a time scale that was closely linked to UT1, a time scale related to the rotation of Earth. The balance between these two considerations has changed very significantly since 1972, and there is widespread agreement that the method of relating UTC to UT1 should be changed by increasing the maximum tolerance between the two scales to more than the current limit of 0.9 s. I propose to realize this decision by means of an algorithmic adjustment process based on the variation in the length of the day over the previous centuries. I use these historical data to extrapolate the length of the day for a century into the future, and to compute a periodic rate adjustment to UTC based on this extrapolation. The adjustment process will not use time steps. The magnitude of the periodic rate adjustment will be re-considered every century, but the basic adjustment algorithm will not change. I suggest a maximum tolerance between UT1 and UTC that is large enough to absorb the irregular and unpredictable variations in the length of the day with respect to the long-term average increase in this value but plays no role in determining the parameters of the adjustment process that is proposed. I also propose that the adjustment be implemented at 12 UTC on 1 January since that is closest to a universal holiday in all time zones.

Refractory materials are used worldwide in process equipment. However, gaseous and liquid process products penetrate the surface layer, and deep into the volume of refractories destructing rather expensive constructions complicated to repair. To address this challenge, there is a need to develop protective coatings for refractory that can limit the penetration of working media and extend their operational lifespan. In this work, the application of gas-dynamic cold spraying (CGDS) to produce a coating on the refractory using fine titanium dioxide (TiO2) particles is explored. These particles are accelerated within a nitrogen flow, passing through a Laval nozzle, and then sprayed onto a fireclay surface. The mechanisms of particle deposition and layer formation on porous surfaces through experiments and numerical simulations were investigated. The geometry of a typical refractory pore was determined, which was then incorporated into Computational Fluid Dynamics (CFD) simulations to model the cold spraying process of porous substrates. As a result, the influence of the particle size on its velocity and angle of penetration into pores was established. Experimental findings demonstrate the effective closure of pores and the formation of a particle layer on the refractory surface. Furthermore, the nanoindentation tests for the refractory samples showcase capabilities for checking coating thickness for porous materials.

Off-grid electrification planning increasingly recognizes the importance of productive use of electricity (PUE) to promote community value creation and (financial) project sustainability. To ensure a sustainable and efficient integration in the community and energy system, PUE assets must carefully be evaluated to match both the community needs and the residential electricity demand patterns. We propose a novel methodology interlinking qualitative interviews, statistical analysis, and energy system modelling to optimize decision-making for PUE integration in off-grid energy systems in rural Madagascar by aligning relevant PUE effectively with anticipated residential electricity demand patterns based on socio-economic determinants of the community. We find that a possible contribution of the PUE to reducing the electricity costs depends signifi-cantly on three factors: 1. the residential electricity consumption patterns that are influenced by the socio-economic composition of the community, 2. the degree of flexibility of i) PUE assets and ii) operational preferences of the PUE user, and 3. the capacity of community members to finance and operate PUE assets. Our study demonstrates that significant cost reductions for PUE-integrated off-grid energy systems can be achieved by applying our proposed methodology. When matching PUE and residential consumption patterns, the integration of PUE assets in residential community energy system can reduce the financial risk of operators, provided the PUE enterprise operates reliably and sustainably. We highlight that the consideration of local value chains and co-creation approaches are essential to ensure the energy system is addressing the community’s needs, creates value for the community, enhances the project´s financial sustainability, and is achieving the overall objectives of decentralized energy system planning.

One way to reduce the negative impact of human activity on the natural environment is to use natural, easily available and relatively cheap to produce compounds in industrial processes. One such compound is naturally occurring calcium carbonate (CaCO3). This compound has adsorption properties so that it can be an alternative to commonly used adsorbents. The aim of this work is to determine the possibility of using CaCO3 to remove pharmaceutical substances such as sulfadiazine and tetracycline from water. The CaCO3 used in this work was synthesised using our own method, which allows the production of CaCO3 particles with nanometric size. In the conducted research, calcium carbonate was used in the form of a suspension in purified solutions and as an inorganic filling of the developed membranes. The mass of pharmaceutical substances removed from their aqueous solutions was determined in the tests carried out. Based on the results obtained, it can be concluded that CaCO3 has the ability to adsorb both tetracycline and sulfadiazine. In suspension tests, the mass of the removed substances per unit mass of adsorbent was 1.52 mg/g and 6.85 mg/g, respectively. In turn, in the case of the process using the developed membranes, the mass of the removed substances per unit mass of adsorbent was 232 mg/m2 and 524 mg/g, which is a several times greater increase in the mass of the removed substance compared to the process using an unmodified membrane.

The main goal was to investigate the ability of non-thermal plasma reactor with gliding arc discharge to remove the diesel exhaust particulates (DEPs). A conventional knifed-shaped LTP GA reactor was utilized. Three cases were studied: 140 L/min, 70 L/min and 14 L/min of air drawn through the reactor and diesel exhaust fumes were sampled continuously. They were assayed in terms of concentration and number particle size distribution. The higher the residence time’s, the higher the energy input that may be utilized for DEPs’ removal. Reactor’s performance definitely lowered the concentration of DEPs (250 - 580 nm) and altered their number size distribution. There was no effect on the number concentration, nor on the particle size distribution, of DEP particulates of 10 – 250 nm in size. The effectiveness of DEPs’ removal: Decreasing flow rate from 140 L/min to 70 L/min somehow altered the values. Achieving the airflow of 14 L/min led to a substantial improvement (even to a fourfold increase for 300 – 480 nm particles). Non-thermal plasma reactors with gliding arc discharge may be successfully adapted in the process of DEPs’ treatment. Their performance may be optimized by adjusting the airflow at the inlet of reactor to guarantee the longest aerosol residence times and the highest removal efficiency.

MIMO (multiple-input multiple-output) radar provides much more flexibility than the traditional radar for its ability to realize far more observation channels than the actual number of T/R (transmit and receive) elements. Designing the array of MIMO imaging radar, the commonly used virtual array theory generally assumes that all elements are placed on the same line. However, due to the physical size of the antennas and coupling effect between T/R elements, a certain height difference between T/R arrays is essential, resulting in the defocusing of edge points of the scene. On the other hand, the virtual array theory implies far-field approximation, leading to inevitable high grating lobes in the imaging result of near-field edge points of the scene observed by common MIMO array. To tackle these problems, this paper derives the relationship between target’s PSF (point spread function) and pattern of T/R arrays, by which the design criterion of near-field imaging MIMO array is presented. Firstly, the proper height between T/R arrays is designed to focus the near-field edge points well. Secondly, the far-field array is modified to suppress the grating lobes in the near-field area. Finally, the validity of the proposed methods is verified by simulations and an experiment.

Human induced climate change led to the recognition of Community-Based Adaptation (CBA) as one of the remedies in building adaptive capacity and resilience of communities. It recognizes the resources and the skills as well as the agency of communities in shaping the optimal strategy. CBA interventions are vital in addressing community needs and contextual specificities, enable participatory and inclusive engagement and thereby facilitate more profound adaptation impacts. Agent-based modelling (ABM) harbors the potential to be the ideal tool to support developing of tailored adaptation strategies while considering capacities, resources, skills, priorities, needs and the cultural context of local communities. ABM allows to capture the complex relationships among various components within community decision making on CBA actions, the CBA actions themselves and the environment. There exist plenty of tools, however they provide for varying degrees of freedom in agent definition, sensitivity analysis, scalability, experiment design and output analysis to name a few. A set of required key criteria for CBA modelling is developed and all available ABM modelling and simulation tools are assessed for their suitability for CBA. NetLogo emerges as the most fitting tool for incorporating and handling the special features of CBA. It is closely followed by GAMA and Envision. The article provides insights and guidance to researchers and practitioners in selecting ABM tools aligned with the specific requirements of their CBA simulations and projects.

Nanling Mountain region is a typical southern hilly region, which plays an important ecological and environmental protection role in China's overall land protection pattern. Based on the remote sensing image data of Longnan City in Nanling Mountain in 2013, 2018 and 2023, this paper interpreted the land use type and analyzed the land use transfer situation by using Land use transfer flow, and Land use transfer matrix. At the same time, based on the remote sensing Ecological index (RSEI) model, the ecological environment quality of Longnan City from 2013 to 2023 was retrieved. The temporal and spatial response model of ecological environment quality to land use transfer in Longnan City from 2013 to 2023 was discussed based on Spatial autocorrelation and Geographic detector. The results show that from 2013 to 2023, the decrease of forest land (16.23km²) and the increase of construction land (13.25km²) were the main land use transfer in Longnan City. The ecological environment index of Longnan City in 2013, 2018 and 2023 was 0.789, 0.917 and 0.872, respectively, showing a trend of "first rising and then decreasing". The ecological environment quality in the north of Longnan City was significantly lower than that in the south, and the poor ecological quality area appeared in and around the northern main urban area, showing a trend of "inward contraction". Forest land, garden land, grassland, cultivated land and water area have a positive impact on ecological environment quality, while traffic land, construction land and other land have a negative impact on ecological environment quality. The response of ecological environment quality to different land use transfer modes is related to the change of the overall ecological environment quality. The interaction between LUCC and other factors had a great impact on the evolution of ecological environment quality in Longnan City.

Academic procrastination, more than merely postponing tasks, represents a significant failure in the self-regulation process of learning. Research on study skills highlights academic time management as one of the crucial elements of learning strategies and sustainable education. These abilities will help achieve the Sustainable Development Goals fourth goal. Therefore, this study aimed to understand how students plan time management in school activities and its influence on study procrastination, analyzing differences between genders and the hours students spend studying. The Time Management Planning Inventory, the Study Procrastination Questionnaire, and a personal and school data sheet were used. A sample of 506 students from elementary schools in northern Portugal was utilized. The results revealed that gender and study hours significantly influence how students plan time management for school tasks in the short and long term. This variable also showed a significant impact on the procrastination of study activities. The practical implications of this study are substantial, as they provide educators and researchers insights into the factors influencing academic procrastination and the role of time management planning and study hours. These insights can be applied to develop effective strategies to reduce academic procrastination and promote sustainable education.

The present state of research in Computational Fluid Dynamics (CFD) is marked by an ongoing process of refining numerical methods and algorithms with the goal of achieving accurate modeling and analysis of fluid flow and heat transfer phenomena. Remarkable progress has been achieved in the domains of turbulence modeling, parallel computing, and mesh generation, resulting in heightened simulation precision when it comes to capturing complex flow behaviors. Nevertheless CFD faces a significant challenge due to the time and expertise needed for meticulous simulation setup and intricate numerical techniques. To surmount this challenge, we introduce paint2sim—an innovative mobile application designed to enable on-the-fly 2D fluid simulations using a device’s camera. Seamlessly integrated with OpenLB, a high-performance Lattice Boltzmann-based library, paint2sim offers accurate simulations. The application leverages the capabilities of the Lattice Boltzmann Method (LBM) to model fluid behaviors accurately. Through a symbiotic interaction with the open-source OpenCV library, paint2sim can scan and extract hand-drawn simulation domains, affording the capability for instant simulation and visualization. Notably, paint2sim can also be regarded as a digital twin, facilitating just-in-time representation and analysis of 2D fluid systems. The implications of this technology extend significantly to both fluid dynamics education and industrial applications, effectively lowering barriers and rendering fluid simulations more accessible. Encouragingly, the outcomes of simulations conducted with paint2sim showcase promising qualitative and quantitative results. Overall, paint2sim offers a groundbreaking approach to mobile 2D fluid simulations, providing users with just-in-time visualization and accurate results, while simultaneously serving as a digital twin for fluid systems.

This longitudinal study aimed to analyze the effects of a team rowing-based training program on physical fitness and anthropometric parameters in female breast cancer survivors (n=40; 56.78±6.38 years). Participants were divided into two groups: one rowed in fixed seat rowing (FSR) boats (n=20; 56.35±4.89 years) and the other in sliding seat rowing (SSR) boats (n=20; 57.20±7.7 years). Both groups engaged in two 75-minute sessions per week for 24 weeks. Significant improvements were observed in both groups in terms of weight (FSR: -1.93 kg, SSR: -1.75 kg), body mass index (FSR: -0.73 kg/m², SSR: -0.67 kg/m²), waist circumference (FSR: -2.83 cm, SSR: -3.66 cm), and hip circumference (FSR: -2.02 cm, SSR: -2.88 cm). Muscle strength improved in lower extremities (jump test: FSR: 2.99 cm, SSR: 3.11 cm) and upper extremities (dominant: FSR: 4.13 kgf, SSR: 4.34 kgf; non-dominant: FSR: 3.67 kgf, SSR: 3.32 kgf). Aerobic capacity also improved, with the SSR group showing a greater increase (FSR: 63.05 m, SSR: 93.65 m). Flexibility tests revealed better results in the SSR group for both dominant (SSR: 1.75 cm vs. FSR: -5.55 cm) and non-dominant limbs (SSR: 1.72 cm vs. FSR: -3.81 cm). These findings suggest that the type of rowing modality can influence physical fitness outcomes, with the SSR group showing superior improvements compared to the FSR group.

The extent of access to energy of displaced populations in settlements and camps in Africa is largely 14 unknown. A multitude of contextual factors, such as the location and the characteristics of housing, 15 the legal status, the socio-cultural background, and the availability of humanitarian and public ser- 16 vices impact the living conditions and the needed energy services. Limitations in accessing energy 17 services have direct, multilayered, and far-reaching implications, including impacts on health, nu- 18 trition, education, protection, and livelihood. The objective of this article is to contribute to a more 19 comprehensive overview of the current state of energy access in displacement contexts on the Afri- 20 can continent by identifying and utilizing existing data. After a screening of the vast and various 21 available information, setting up of a database, consolidating the gathered data as well as assessing 22 the quality through a quality assessment method, the currently available information is visualized 23 and discussed. Considerable differences in the access to electricity for displaced persons across the 24 countries are found. For both electricity and clean cooking, the availability for displaced persons 25 ranges from nearly no access at all up to an access rate of 100%. More strikingly, the results also 26 show that besides South Africa and countries in the Maghreb region, the access to both clean cook- 27 ing and electricity for displaced persons is very low. At the same time, the fragmented data availa- 28 bility, the poor data quality, and the questionable expediency of available data allows neither solid 29 theoretical conclusions nor planning of effective practical implementation measures. Novel inter- 30 disciplinary research, conceptual frameworks and indicators are needed for the purpose of compa- 31 rability and consistency. Future research has the potential to more comprehensively capture the 32 current state of access to energy in displacements contexts and in a next step to examine how energy 33 is interwoven in the lives of displaced people to derive a set of more detailed context-sensitive en- 34 ergy indicators. It is essential that the concerned persons, the displaced persons themselves are in- 35 cluded in the research in a meaningful way.

The purpose of this longitudinal study was to determine the effects of a rowing training program on physical fitness and body composition in female breast cancer survivors (56.78 ± 6.38 years). Over six months, the participants (n=40) performed two training sessions per week for an average of 75 minutes, combining resistance and muscle strength exercises with rowing. To evaluate the impact of the program, physical fitness tests and anthropometric measurements were carried out before and after the training protocol. The results show statistically significant improvements in measures such as weight (-1.84 kg), BMI (-0.7 kg/m2), hip (-3.24 cm) and waist circumference (-2.45 cm). In addition, variables associated with physical fitness also improved including leg strength (3.04 cm), dominant handgrip strength (4.24 kgf), non-dominant handgrip strength (3.49 kgf), aerobic endurance (78.35 m) and muscle flexibility (3.96 cm). We can therefore conclude that a rowing-based exercise program is an effective strategy to improve physical fitness in this type of population, yielding improvements in both anthropometric measurements and basic physical capacity variables, essential factors for better health and quality of life.

This study evaluated batch fermentation modes, namely, separate hydrolysis and fermentation (SHF), Quasi-simultaneous saccharification and fermentation (Q-SSF), and simultaneous saccharification and fermentation (SSF), and fermentation conditions, i.e., enzyme and yeast loadings, nutrient supplementation and sterilization, on high titer bioethanol production from SPORL-pretreated Douglas-fir forest residue without detoxification. The result indicated Q-SSF and SSF were obviously superior to SHF operation in terms of ethanol yield. The enzyme loading showed a strong positive correlation between enzyme loading and the ethanol yield. The nutrient supplementation and sterility was not necessary for ethanol production from SPORL-pretreated Douglas-fir. The yeast loading showed no significant influence on the ethanol yield for typical SSF conditions. The terminal ethanol titer of 43.2 g/L, or 75.1% theoretical based on glucose, mannose, and xylose theoretical was achieved when SSF was conducted at the condition of following: whole slurry solids loading of 15%, enzyme loading of 20 FPU/g glucan, 1.8 g/kg (wet) yeast loading, without nutrition supplementation and sterilization, at 38°C, on shake flask at 150 rpm for 96h. It is believed that with mechanical mixing, enzyme loading can be substantially reduced with affect ethanol yield by using a long fermentation time.

The aim of this study is to assess of rare earth elements (REE) content in hair samples in children, living in Lovozero village, near REE mining site, and possible effects of REEs on the prevalence of nervous system diseases in the Lovozersky district (Murmansk region, Kola Peninsula). School-age children (53 persons) were recruited for analysis of REE content in their hair samples. REEs (Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu) content was estimated by inductively coupled plasma mass spectrometry (ICP-MS). Analysis of REE content in the hair of children living in the Russia, Kazakhstan and China indicates REEs intake from environment. A possible contribution of REEs to the nervous system disorders is supported by the link between REE content in the hair samples of children, living near REE mining (China) and by manifesting cognitive disorders in these children. It also turn out that highest prevalence of the nervous system diseases in children 15-17 years old manifested in the Lovozersky district then in other area in the Murmansk region. The paper discusses the possible contribution of REEs to the prevalence of episodic paroxysmal disorders (G40-G47), cerebral palsy (G80-G83), epilepsy and status epilepticus (G40-G41).

The development of accurate dynamic battery pack models for electric vehicles (EVs) is critical for the ongoing electrification of the global automotive vehicle fleet, since these serve as a key element in the energy performance of an EV powertrain system. The Equivalent Circuit Model (ECM) technique at the cell level is commonly employed for this purpose, combining accuracy and efficiency in the representation of battery operation within the broader powertrain system. In this study, a second-order ECM model of a battery cell is being developed using Modelica, an equation-based modeling language. Parameter lookup tables at multiple levels of state of charge (SoC), extracted from Li-ion battery cells with 4 different commonly used cathode materials, have been utilized. This approach allows for a representation of the battery systems that are used in a wide range of commercial EV applications. To verify the model, an integrated EV model is developed and simulation results of the FTP75 driving cycle have been compared against an equivalent application in MATLAB Simulink. The findings demonstrate a close match between the results obtained from both software across different system points. Specifically, the maximum deviation of SoC is limited to 0.08% and the maximum value of relative voltage deviation is 1.4%. The verified model enables the exploration of multiple possible architecture configurations of EV powertrains with Modelica.

According to current forecasts, global heating is likely to exceed 2,8°C by the end of the century. This makes substantial adaptation measures necessary to secure a broad basis for livelihoods provision and the conservation of biodiversity. While the implementation of top-down and technocratic adaptation efforts is the majority, related adaptation shortcomings of socio-economic and ecological nature are becoming more and more apparent. Community-based adaptation (CBA) with its participatory, inclusive and needs-based bottom-up approach offers a promising and powerful alternative. This article uses a semi-systematic literature review approach to screen the current literature and identify core issues of CBA. Linking communality, locality, multidimensionality, power imbalances, transformative potential, localisation, the triad of adaptation metrics and adaptation with nature to corresponding potential actions for practical implementations provides a more holistic conceptualisation and broadens the horizons for further learnings, research and improved application.

The aim of this study was to investigate and effect of application of different conditions of freeze-drying on the kinetics of process and the sorption properties of dried apples. Slices of apple were frozen and subjected to freezing-drying process with different combination of a shelf temperature (-20, 10, 20, 30°C) and pressure (37, 63, 103, 165 Pa). During the freeze-drying, the temperature in the centre of material was recorded. The moisture content in dried material and changes of water content dried apples stored at humidity of 75.3% were obtained. The Midilli et al. model was used to describe drying kinetics of the freeze-drying with good fit. Drying time decreased from 660 (variant with a constant shelf temperature of 30°C, pressure 63 Pa) to 1305 minutes (variant with temperatures −20: 10: 20: 30°C, pressure 63 Pa). For this reason, the most favourable experimental parameters were: temperature of 30°C and pressure of 63 Pa. However, application of these parameters caused higher absorption of water vapour during storage. Therefore, the selection of freeze-drying parameters should also be related to the expected properties of the final product.

The relaxation process of lithium batteries caused by load variation is considered. It is shown that such processes have strong dependence on internal physical and chemical processes and battery technical conditions. Theoretical expressions of the relaxation process caused by a step-like load variation have been obtained for 1^st and 2^nd order equivalent electrical circuits. The experimental investigations show that the obtained models fit the real relaxation processes and the behavior of the identified parameters could be explained by specific features of physical and chemical processes within the lithium battery. It should be noted that the obtained results can be generalized for a different type of electrochemical power source. The proposed approach makes it possible to provide means for electrochemical power source characterization and diagnostic, the main advantages of which are good time localization of measurement procedures and inexpensive apparatus implementation.

Linear alkylbenzene sulfonate (LAS) anionic surfactants are widely used, present in wastewater, and can be discharged causing environmental damage. Without considering biodegradation, sorption and desorption reactions play an important role and depend on the characteristics of the aquifer medium such as the content of organic matter and clay. These processes are modelled with PHREEQC using laboratory-obtained data on columns with an input LAS pulse. LAS adsorption and desorption step experiments carried out in sand columns were also modelled with this software and distribution constants were similar to those obtained for pulse. The values of the starting distribution constant provided by batch tests with sand and agricultural soil mixtures establish the maximum value that must be obtained for column modelling. Distribution constants from column experiments obtained by Freundlich and linear isotherms provided very similar results, the latter with more consistent achievement. The modelling results showed longer elution times in the case of the heavier homologues and with a higher percentage of agricultural soil, which would translate into the great persistence of these compounds in the environment. In the case of soil contamination with wastewater-containing surfactants, these results would allow the development of mitigation strategies for these environmental impacts.

Software is playing the most important role in recent vehicle innovation, and consequently the amount of software has been rapidly growing last decades. Safety-critical nature of ships, one sort of vehicles, makes Software Quality Assurance (SQA) has gotten to be a fundamental prerequisite. Just-In-Time Software Defect Prediction (JIT-SDP) aims to conduct software defect prediction (SDP) on commit-level code changes to achieve effective SQA resource allocation. The first case study of SDP in maritime domain reported feasible prediction performance. However, we still consider that the prediction model has still rooms for improvement since the parameters of the model are not optimized yet. Harmony Search (HS) is a widely used music-inspired meta-heuristic optimization algorithm. In this article, we demonstrated that JIT-SDP can produce the better performance of prediction by applying HS-based parameter optimization with balanced fitness value. Using two real-world datasets from the maritime software project, we obtained an optimized model that meets the performance criterion beyond baseline of previous case study throughout various defect to non-defect class imbalance ratio of datasets. Experiments with open source software also showed better recall for all datasets despite we considered balance as performance index. HS-based parameter optimized JIT-SDP can be applied to the maritime domain software with high class imbalance ratio. Finally, we expect that our research can be extended to improve performance of JIT-SDP not only in maritime domain software but also in open source software.

The main purpose of the study was to study the effects of a specific rowing ergometer training program on the athletic performance of young adolescents (n=56; 11.73 ± 1.4 years old) com-pared to a workout based on general strength training. Eight-week training program was im-plemented, with four sessions per week and two-hours per session. Sample was divided in two groups: a control group (CG) that performed circuit training with exercises aimed at building general strength and an experimental group (EG) who focused on specifically training on a rowing ergometer (rowing machine). The data obtained in a rowing meter test over the compe-tition distance were analyzed to obtain the average power attained (W) at the beginning of the training, at the middle (4 weeks), at the end of the training (8 weeks) and one year after the ex-perimentation. The results show that, although both forms of training improve the average W obtained in both categories, the EG subjects (+29.94W) obtained better averages in all phases of the study compared to the CG (+5.88W). Furthermore, this increase was greater in male rowers (+ 34.06W) than in female rowers (+24.54W). These results reveal that a specific rower rowing ergometer training program has a significant effect than a general strength program and these effects can even be observed a year after the intervention.

Nowadays the relationship between planning land use and actual land use is not so clear in general. A lot of efforts have been put in the failures of regulation for the expansion of construction land. However, it still lacks an integrated approach to study the effectiveness of land use regulation in terms of different land use types. Furthermore, the existing evaluation of land use plan mainly focuses on a general level, a detailed research on the regulation effectiveness of each construction land use type is absent. Therefore, this research tries to evaluate regulation effectiveness of land use plan, which takes Cangwu country, Guangxi Province as an example. The finding by analysis is that the total area of construction land expansion was about 3494.73 ha, nearly 1.1 times of the plan quota. Moreover, the effectiveness differs greatly in various construction land use types. Town, industrial/mining sites can be well regulated through the quota of land use plan. While, the quota regulation system is not as effective for other type of construction land. Thus, we suggest to improve the regulation effectiveness of construction land through different plan instruments.

Athlete’s heart is characterised by structural, functional, and electrical remodelling. During an exercise session, the heart increases the use of oxygen, which is associated with decreased vascular resistance in the lungs’ circulation. Left ventricular hypertrophy is an echocardiographic modification especially met in endurance athlete’s heart. Moreover, left atrial dilatation represents another important characteristic of endurance athletes. Electrical modulation in the athletic heart induces neurological modifications leading to sinus arrhythmia, bradycardia, early repolarisation, and first-grade atrioventricular (AV) blocks. Athletes' nutritional status involves the assimilation of macronutrients such as proteins, carbohydrates, and fats. Depending on the duration of physical exercise, ATP can be obtained in aerobic or anaerobic conditions. This systematic review aims to find correlations between different evaluative methods of cardiac adaptation and present the metabolism in performance athletes.

Process parameters influencing mechanical properties have always been a critical area of research for quite some time. We investigated the effect of laser power and laser scan velocity on the impact strength and maximum stress of 3D-printed metallic specimens of steel 1.2709 and 1.4542. Laser power significantly affected the impact strength and maximum stress of both the steels. With the increase in laser power, the impact strength increased for 1.2709 steel. However, there was a little increase in the impact strength with increasing laser power in the case of 1.4542 steel. Laser power had a decreasing impact on the maximum stress for 1.2709 steel. For 1.4542, maximum stress increased with increasing laser power, but then gradually declined. We observed that using laser power beyond 350W led to printing defect in the specimens, as maximum stress for some specimens reached close to zero in the case of 1.4542 steel. Laser scan velocity had a strong declining effect on the impact strength of 1.2709 steel.

Sustainable food consumption has attracted a widespread attention during last decades by scholars, policy makers and consumers. In line with this, farmers’ markets (FMs) have the potential to encourage sustainable agricultural production and consumption. By reducing the number of actors and distances along the food chain, these alternative food systems foster the reconnection between farmers and consumers and contribute to different social, economic and environmental sustainable goals. This paper provides insights on the role of consumers' sustainability concerns related to their motivation for shopping at FMs. By means of a choice experiment, we analyze the determinants of consumers’ WTP for buying apples at FMs. We are particularly interested in understanding how attitudes towards the three sustainability dimensions are related to consumer preferences in this context. We find that consumer attitudes towards direct contact with producers, contributing to farmers’ income, and environmental benefits can be directly related to product characteristics that are specific to FMs.

High-density olive groves, despite their interesting production potential, have several limitations, also due to the high fruit load and the irrigation requirements.The study aimed to evaluate the effects of fruit load and deficit irrigation on oil yield and fruit quality, and on olive chemical composition in a high-density olive grove (cv Sikitita). Our main hypothesis was that the primary metabolism, as influenced by crop load and stress, could modify the accumulation of different phenolic classes.Different fruit loads were generated through flower thinning (66%, 50%, 33%, 0%) and two deficit irrigation treatments (-60%, -75%) were compared to the well-watered control (920 m3/ha).Thinning treatments had a limited effect on oil yield, on the other hand, deficit irrigation caused considerably less oil accumulation in the fruit on all sampling dates.Thinning 66% and deficit irrigation 75% were considered with the control for untargeted metabolomic analysis, considering three sampling dates. 233 different phenolic compounds were annotated. Multivariate HCA results indicated the impact of harvest time on the phenolic profile of olive fruits, yielding two separate clusters grouping t1 and t2 together and apart from t3. Regarding agronomic techniques, they played a differential role in the phenolic profile (supervised OPLS – DA). Fruit load mostly affected flavonoid glycosides. In contrast, the phenolic response to deficit irrigation is more heterogeneous, with phenolic acids (35%), flavonoids (25%), LMW, and other phenols (25%).

Background: breastfeeding is the optimal nourishment for infants and recommends that children commence breastfeeding within the first hour of birth and be exclusively breastfed for the initial 6 months of life. Our objective was to determine which factors related to mothers could influence the degree of exclusive breastfeeding during hospitalization, as well as to assess breastfeeding mothers' attitudes towards breastfeeding. Methods: A multicenter cross-sectional study was undertaken in the healthcare area of Santiago de Compostela, Spain. The reduced Iowa Infant Feeding Attitude Scale (IIFAS-s) was employed to gauge maternal attitudes toward feeding their baby. Results: 64 women were studied. The overall score of IIFAS-s (mean ± standard deviation) was 36.95 ± 5.17. No use of pacifier by the newborn was associated with a positive attitude for breastfeeding. Having previous children (ORa=6,40; IC95% 1,26 – 32,51) and previous experience with breastfeeding (ORa=6,70; IC95% 1,31 – 34,27) increase the likelihood of exclusive breastfeeding during admission. Conclusions: It is important to identify the factors that contribute to increasing the probability that mothers choose exclusive breastfeeding. We must guide our training efforts to these factors.

The weight coefficients of the diaphragm spring depend on experiences in the traditional optimization. However, this method not only cannot guarantee the optimal solution but it is also not universal. Therefore, a new optimization target function is proposed. The new function takes the minimum of average compress force changing of the spring and the minimum force of the separation as total objectives. Based on the optimization function, the result of the clutch diaphragm spring in a car is analyzed by the non-dominated sorting genetic algorithm (NSGA-II) and the solution set of Pareto is obtained. The results show that the pressing force of the diaphragm spring is improved by 4.09%by the new algorithmand the steering separation force is improved by 6.55%, which has better stability and steering portability. The problem of the weight coefficient in the traditional empirical design is solved. The pressing force of the optimized diaphragm spring varied slightly during the abrasion range of the friction film, and the manipulation became remarkably light.

This study aims to spatially analyze the distribution characteristics of vacant homes in Asan-si, Chungcheongnam-do, and understand the differences in factors causing vacant homes by type. We use a variety of statistical methods to examine these factors and identify key influencing factors such as the number of vacant stores, changes in overall population, land use complexity, and physical characteristics of land and buildings. The findings reveal that the factors contributing to the occurrence of vacant homes vary significantly by region and property type, highlighting the need for region-specific policies. For instance, in old town areas, small lot ratios and land use complexity are significant, while in rural village, the average number of floors and land use complexity play a major role. This study underscores the diversity of factors influencing vacant homes, suggesting that policies should be tailored to the unique characteristics of different regions to effectively address this issue.

Malignant lymphoma is an unusual form of gallbladder neoplasm. Almost all of these tumors are diffuse large B-cell lymphomas or mucosa-associated lymphoid tissue-type lymphomas. Herein, we report a rare case of a gallbladder Burkitt’s lymphoma (BL) in a child living with HIV. As far as we are concerned, this is the secondfirst report in the pediatric population and the first one in an individual living with HIV. The patient (a five-year-old black female child) attended the Federal Hospital of Lagoa, Rio de Janeiro, Brazil, underwent cholecystectomy and the postoperative pathological analysis of the gallbladder revealed a diagnosis of BL (EBV-positive). Also, HIV serology was performed and returned positive. She was transferred to the Martagão Gesteira Institute of Pediatrics and Childcare for oncological treatment, dying from sepsis and disease progression about 18 months later. Patient did not undergo ART/cART. Previous cases of gallbladder BL were herein described and analyzed to characterize the clinicopathological features and possible similarities. BL can occur in the gallbladder both in the context of HIV infection and in the pediatric population. Biopsy is mandatory in cases with suggestive findings of lymphoma, and an early diagnosis can change the course of the disease. Furthermore, the case highlights the importance of an early initiation of ART/cART in people living with HIV (PLWH).

This study investigates the impact of thin flame combustor design on hydrogen flame characteristics and combustion performance through numerical simulations. Variations in flame shape and combustibility between 100% methane and 100% hydrogen combustion are analyzed. Three combustor header shapes (flat, concave, and convex) are modeled to assess their influence on flame behavior. Results show distinct flow patterns, with concave headers promoting strong central flows and convex headers dispersing the flow outward. Temperature field analysis indicates that hydrogen flames have higher temperatures and shorter quenching distances compared to methane flames. A comparative analysis of combustion products is conducted to evaluate combustion performance and NOx emissions. Consequently, the concave header has high combustibility and increases temperatures and NOx fraction in hydrogen combustion.

Background: The laryngeal mask airway Vision Mask (LMA VM) is a supraglottic airway device (SAD) with vision guidance system. The ideal head and neck position for direct laryngoscopy is known, but the ideal position for placing a LMA is not. The objective of this study is to evaluate and compare the optimal position for placement of a video laryngeal mask airway. Methods: This was a prospective observational, transversal and analytical study of 72 consecutive patients. In the same patient, laryngeal vision was first assessed with the head and neck in the sniffing position and then with the head in the neutral position. Procedures were filmed and performed by the same investigator. Assessment of the laryngeal view was performed using two classifications: modified Cormack-Lehane classification and Brimacombe classification. Device placement was considered adequate when the Cormack-Lehane rating was scored from 1 to 2 and the Brimacombe rating was from 2 to 4. Results: 72 patients were included in this study. In the assessment of the glottis using the Cormack Lehane classification for fiberoptic view, laryngeal visibility was adequate in 64 (88.89%) patients in the neutral position and in 65 (90,28%) patients in the sniffing position (p>0,05). In the fiberoptic view of the glottis, assessed using the Brimacombe classification, laryngeal visibility was adequate in 68 (93%) patients in the neutral position and in 69 (95%) patients in the sniffing position, (p>0,05). There was no statistically significant difference in the rate of success between the sniffing position (70 patients, 97.22% success rate) and the neutral position (67 patients, 93.06% success rate) during the first insertion attempt. Two patients required a second attempt in the sniffing position, while five patients required a second attempt in the neutral position. Conclusion: An adequate sniffing position did not result in a better glottic view than neutral position, and the number and type of additional maneuvers were equal in both positions.

(1) Background: Ectopic pregnancy (EP) is when fertilized ovum implanted outside of uterine cavity. The incidence was 1.5% to 2.0% of all pregnancies [1, 2]. EP decreases fertility ability [3]. This study focused on the pregnancy rate after EP and various parameters influencing pregnancy. (2) Methods: The data was extracted from National Health Insurance Research Database (NHIRD) during 2000-2013. The study group enrolled women with one EP history. Those who did not have EP was put into the control group. Chi-square/Fisher exact test was performed on category variable and t-test was used on continue variables. (3) Results: The EP group had a higher cumulative rate of conceive, 41.55% than control group, 37.14% and 1.16 times higher risk in developing pregnancy (P<0.001). The conceiving rate was lower than the control group in the first 5 years, but higher than the control group in the 10th to 14th years. (4) Conclusions: The fecundability after EP is lower at the beginning, but regained after long term follow.

This qualitative study explores the implementation and conformation process of digital devices in teaching and learning before, during, and after the COVID-19 pandemic in Nepal. Using Rogers' Diffusion of Innovation Theory as a framework, the study examines the adoption and adaptation of digital devices by in-service secondary mathematics teachers (n=62) and their perceptions and preferences towards instructional modality. The findings suggest that despite the increased reliance on digital devices during the pandemic, there is a less likelihood of using them in face-to-face classrooms in developing countries like Nepal. The adoption of online learning has not yet reached the confirmation stage, even after the onset of the COVID-19 pandemic. Prior to the pandemic, online learning was not widely implemented or confirmed by teachers in developing countries societies. The study also provides important insights into the challenges and opportunities of using digital devices in post-COVID-19 classrooms, and its implications for policymakers and educators in Nepal.

Citizen science substantially contributes to large-scale biodiversity monitoring and the enhancement of public literacy. While both of the contributions largely depend on the public’s self- regulated learning. In this study, we employed a mix- method approach, incorporating both a questionnaire survey of 133 participants and interviews with 12 volunteers, aiming to explore the feature of self- regulated learning in citizen science, as well as identify the main factors impacting it. The volunteers are all different ages, from different jobs, with varying educational backgrounds. The findings revealed that the educational background of volunteers did not significantly impact their self-regulated learning. However, an increased frequency of participation was linked to higher levels of self-regulated learning. Furthermore, achievement goal orientation mediates the prediction of self-regulation by scientific epistemology. These insights underscore the importance of enhancing citizen science's impact on scientific literacy by fostering self-regulated learning among participants. This can be achieved through explicit instruction in scientific epistemology and by fostering a sense of achievement to boost achievement goal orientations. Additionally, our study advocates for the promotion of social interaction between students and out- of- school citizen scientists in school-based citizen science projects. The main innovation of this study is to consider volunteers as learners, not merely as contributors of data.

Despite available global efforts and funding, Tuberculosis (TB) continues to affect a considerable number of patients worldwide. Policy makers and stakeholders set clear goals to reduce TB incidence and mortality, but the emergence of multidrug-resistant TB (MDR-TB) and extensively drug-resistant TB (XDR-TB) complicate the reach of these goals. Drug-resistance TB needs to be diagnosed rapidly and accurately to effectively treat patients, prevent the transmission of MDR-TB, minimise mortality, reduce treatment costs and avoid unnecessary hospitalisations. In this narrative review, we provide a comprehensive overview of laboratory methods for detecting drug resistance in MTB, focusing on phenotypic, molecular and other drug susceptibility testing (DST) techniques. We found a large variety of methods used, with the BACTEC MGIT 960 being the most common phenotypic DST and the Xpert MTB/RIF being the most common molecular DST. We emphasise the importance of integrating phenotypic and molecular DST to address issues like resistance to new drugs, heteroresistance, mixed infections and low-level resistance mutations. Notably, most of the analysed studies adhered to the outdated definition of XDR-TB and did not consider the pre-XDR definition, thus posing challenges in aligning diagnostic methods with the current landscape of TB resistance.

German noise action plans aim to reduce negative health outcomes from noise exposure and identify quiet areas free of noise pollution. Quiet area identification in German noise action plans is based primarily on noise mapping and spatial analysis and not empirical or qualitative data about acoustic environments, thus leaving a gap in the understanding of the quality of formally recognized quiet areas in noise action plans. This work presents a comparative empirical case study in Dortmund, Germany, with the aim to describe the diurnal dB(A) and biophonic properties of quiet areas versus noise 'hot spots'. Sound observations were collected (n=282,764) in five different natural or recreational land use patch types larger than four acres within 33 proposed quiet areas in Dortmund (n=70) and 23 noise hot spots between April 27^th, 2022 and March 2^nd, 2023. We find that quiet areas are on average more than 20 dB(A) quieter than noise hot spots almost every hour of the day. Forests, managed tree stands, cemeteries, and agriculture diel patterns are dominated by dawn dusk chorus in spring and summer, whereas sport and recreation as well as noise hot spots are dominated by traffic and human noise. A novel composite biophony mapping procedure is presented that finds distinct temporal distribution of biophony in forested and agriculture peri-urban locations positively associated with patch size, distance away from LDEN > 55, proximity to water, and the number of vegetation layers in the plant community. Anthrophony distribution dominates urban land uses in all hours of the day, but expands during day and evening and contracts at night and in dusk hours. The procedures presented here illustrate how qualitative information regarding quiet areas can be integrated into German noise action planning.

Epilepsy is one of the most prevalent and serious brain disorders, affecting 70 million people worldwide. Antiseizure medications (ASMs) though relieve symptoms and prevent the occurrence of future seizures in epileptic patients have limited effect on epileptogenesis. Addressing the multifaceted nature of epileptogenesis and its association with Nod-like receptor family pyrin domain containing 3 (NLRP3) inflammasome-mediated neuroinflammation requires a comprehensive understanding of the underlying mechanisms for development of targeted therapeutic strategies beyond conventional antiseizure treatments. Several types of NLRP3 inhibitors have been developed and their effect has been validated both in vitro and in vivo models of epileptogenesis. In this review, we discuss the advances in understanding the regulatory mechanisms of NLRP3 activation as well as progress made and challenges facing in the development of NLRP3 inhibitors for the treatment of epilepsy.

It is an utmost importance to characterize drug candidates as early in the development pipeline as possible. Appropriate application of the emerging high throughput analytical techniques unlocks the opportunities to obtain experimental data for in vitro absorption, distribution, metabolism and elimination (ADME) profiling of large compound libraries which is crucial for selection of lead compounds. In an usual scenario, only one drug candidate will be selected from thousands of early compounds based on several stability and screening results. A high to medium throughput screening approaches could significantly accelerates the subsequent research and production phases. Traditionally, the analysis of metabolic stability assays heavily relies on high throughput LC-MS/MS techniques to meet with the lead profiling demands. In this study presented an innovative experimental approach that can offer a refreshing alternative. Laser Assisted Rapid Evaporative Ionization Mass Spectrometry (LA-REIMS) is a quick and efficient method for characterizing complex biological samples without laborious sample preparation and chemical separation. Therefore, using an automated LA-REIMS well plate reader as fast as 8 seconds per sample, we assessed the oxidative metabolic stability of active agents using biomimetic metalloporphyrin-based oxidative model reactions at various pH for commercially available drug substances and compared stability measurements with traditional HPLC-DAD-MS results.

Butyl rubber-based composite (BRC) is one of the most popular materials for the fabrication of protective glove against chemical and mechanical risks. However, in many working places such as metal manufacturing or automotive mechanical services, its mechanical hazards usually appear together with metalworking fluids (MWFs). The presence of these contaminants, particularly at high temperature, could modify its properties due to the scission, the plasticization, the crosslinking of polymer network and thus led to severe modification of mechanical and physicochemical properties of material. This work aims to determine the effect of temperature and a metalworking fluid on mechanical behavior of butyl rubber composite dealing with crosslinking density, cohesion forces and elastic constant of BRC on the based on Mooney-Rivlin’s theory. The effect of temperature with and without MWFs on thermo dynamical properties and morphology of butyl membranes is also investigated. The prediction of service lifetime is then evaluated from extrapolation of Arrhenius plot at different temperatures.

Rabies remains a significant global threat, yet accurate estimations of its impact are hindered by the lack of confirmatory diagnoses. Postmortem confirmation of rabies traditionally involves invasive brain tissue testing, a process met with resistance from deceased patients' families, impeding consent. This paper presents and evaluates an innovative yet unpublished transnasal approach for postmortem brain tissue collection, offering a minimally invasive, easier, faster, and safer method. This method preserves the cadaver's integrity, potentially easing family reluctance towards autopsies. The limited testing of both human and animal rabies in Ghana highlights the challenges in diagnosing this fatal disease. Scarce diagnostic resources and the complexity of obtaining brain tissue samples exacerbate the issue. Cultural and religious beliefs surrounding autopsies contribute to familial hesitation, viewing these procedures as disruptive and disfiguring, further complicating consent. The transnasal technique involves approaching the brain tissue through the nostrils and cribriform plate without any superficial manipulation of the patient's head and face, thereby preserving aesthetics and natural features of the person. Technological advancements and seamless One Health collaboration among governmental, non-governmental, and research entities locally and globally culminated in Ghana's first confirmed rabies diagnosis using this method of brain tissue collection. This success emphasizes the efficiency and feasibility of transnasal brain collection approach and the invaluable role of the One Health approach and collaborative efforts in overcoming diagnostic challenges in rabies control.

Bats are natural hosts for a wide variety of viruses and could therefore be the reservoir, source and spillover for several mammalian viruses, including adenoviruses. We examined faecal samples from 12 bats (five species of the family Vespertilionidae) from central Russia (Moscow Region) and found that two of them (16%) were positive for mastadenoviruses. One of the identified viruses was isolated from faeces of Nyctalis noctule and named BatAdV/MOW15-Nn19. The genome of the BatAdV/MOW15-Nn19 was 37,915 bp in length. Comparative studies have shown significant divergence of the nucleotide sequence of the BatAdV/MOW15-Nn19 genome from European mastadenoviruses, the highest genome sequence similarity was to isolate WA3301 from an Australian bat. Phylogenetic analysis, as well as a comparative analysis of the protein coding genes to homologous available from public database, showed evidence of novel species within Mastadenovirus genus (preliminary named «K»). Analysis of the short part of the DNA polymerase gene of BatAdV/MOW15-Nn19 reveals few NCBI records from Europe with high identity to the new virus, i.e. mastadenoviruses related to the new species are circulating in European bats. The partial genome of another mastadenovirus from Pipistrellus nathusii was identified, it represented bat adenovirus species B, which is widely distributed in European Vespertilionidae bats. New data on the genetic diversity of bat adenoviruses may help to better understand how they evolved in mammals and spread across Europe.

Correlations among estrus cycle, pyometra, and canine diabetes mellitus (CDM) have been described since the late 1950s, and substantial progress in understanding mechanisms beyond was achieved nowadays. Progesterone-related diabetes mellitus (PRDM) in dogs is known for its particular potential for diabetes remission. Thus, a deep understanding of the physiopathological aspects involved is crucial to postulate treatment guidelines to improve the PRDM remission rate, as well as to inform preventive measures. This narrative review aims to provide relevant detailed information on 1) canine estrus cycle and its impact on CDM etiology and management, 2) the role of pyometra as a further cause of insulin resistance, and 3) useful individual therapeutic and preventive strategies. Pharmacological annulment of progesterone effects, as well as inflammatory and progesterone-related conditions resolution in association with adequate exogenous insulin therapy, and residual beta cell function, are key aspects to achieve remission, or at least to improve diabetic clinical control. In this way, spaying should be considered mandatory in most PRDM cases. Preventive measures against CDM can include spaying recommendations; however, individual-based recommendations should be considered since castration may be associated with some long-term health issues.

This article purposed to examine the impact of integration between Lean accounting (LA) tools & Just in Time (JIT) technique on Cost Reduction (CR) in modern manufacturing environment in Saudi establishments, these two variable moderated by Ethical Standards (ESs). A quantitative methodology was used for realizing the study objectives and answering study questions, the main tool exercised for producing the incipient data was a fully-structured questionnaire with closed ended questions, which was designed and passed around online among a selected sample of (109) managers and accountants in Saudi manufacturing firms. Descriptive and deductive statistics adopted to derive the findings, wherefore the compiled responses analyzed by SPSS & AMOS and the results showed that there is direct and indirect effect of LA tools & JIT technique on CR in Saudi industrial companies, especially when using ESs. These findings could provide decision makers in Saudi manufacturing companies with the acuity of adopting both methods in a combined way to maximize the profits of these firms. The results of this study also suggest that the application of LA tools & JIT technique has a positive effect on the promotion of sustainable manufacture and consequent achievement of high sustainable performance.

Background: Pharmacists need up-to-date knowledge and decision-making support in HIV care. We aim to develop MARVIN-Pharma, an adapted artificial intelligence-based chatbot initially for people with HIV, to assist pharmacists, considering evidence-based needs. Methods: From Dec 2022 to Dec 2023, an online needs-assessment survey evaluated Québec pharmacists' knowledge, attitudes, involvement, and barriers relative to HIV care, alongside perceptions relevant to the usability of MARVIN-Pharma. Recruitment involved convenience and snowball sampling, targeting National HIV and Hepatitis Mentoring Program affiliates. Results: Forty-one pharmacists (28 community, 13 hospital-based) across 15 Québec municipalities participated. Participants perceived their HIV knowledge as moderate (M=3.74/6). They held largely favorable attitudes towards providing HIV care (M=4.02/6). They reported a “little” involvement in the delivery of HIV care services (M=2.08/5), most often ART adherence counseling, refilling, and monitoring. The most common barriers reported to HIV care delivery were a lack of time, staff resources, clinical tools, and HIV information/training, with pharmacists at least somewhat agreeing that they experienced each (M≥4.00/6). On average, MARVIN-Pharma's acceptability and compatibility were in the ‘undecided’ range (M=4.34, M=4.13/7, respectively), while pharmacists agreed to their self-efficacy to use online health services (M=5.6/7). Conclusion: MARVIN-Pharma might help address pharmacists' knowledge gaps and barriers to HIV treatment and care, but pharmacist engagement in the chatbot’s development seems vital for its future uptake and usability.

The measurements of the proton electromagnetic form factors in the time-like region using the initial state radiation technique are reviewed. Recent experimental studies have shown that initial state radiation processes at high luminosity electron-positron colliders can be effectively used to probe the electromagnetic structure of hadrons. The BABAR experiment at the B-factory PEP-II in Stanford and the BESIII experiment at the $\tau$-charm factory BEPC-II in Beijing have measured the time-like form factors of the proton using the initial state radiation process $e^{+}e^{-}\to pbar{p}\gamma$. The two kinematical regions where the photon is emitted from the initial state at small and large polar angles have been investigated. In the first case the photon is in the region not covered by the detector acceptance and is not detected. The Born cross section and the proton effective form factor have been measured over a wide and continuous range of the the momentum transfer squared $q^2$ from threshold up to ~42 (GeV/c)$^2$. The ratio of electric and magnetic form factors of the proton has been also determined. In this report, the theoretical aspect and the experimental studies of the initial state radiation process $e^{+}e^{-}\to p\bar{p}\gamma$ are described. The measurements of the Born cross section and the proton form factors obtained in these analyses near the threshold region and in the relatively large $q^2$ region are examined. The experimental results are compared to the predictions from theory and models. Their impact on our understanding of the nucleon structure is discussed.

The concept of a ‘just transition’ encompasses political and policy imperatives to minimise the harmful impacts of industrial and economic transitions on workers, communities and society more generally, and to maximise their potential benefits. This imperative has gained heightened importance as governments commit to reducing greenhouse gas emissions. A wide range of policies strategies and initiatives have been adopted by national and regional governments to facilitate and help manage a just transition. It is a concept that is increasingly being put into practice. This scoping study identifies and compares strategies, policies and practices that are presently being implemented in order to manage a just transition across 25 countries and 74 regions alongside European Union-level policies. This work develops a typology of policy instruments to manage just transitions and identifies implementation gaps and leading practices.

Aim: To analyze a single center's experience with Short Bowel Syndrome/ Chronic Intestinal Failure (SBS/CIF) in adult patients treated with Home Parenteral Nutrition (HPN). Materials and methods: In the last thirty years, 13 patients with SBS/CIF were included in an HPN program. Results: Between 1992 and 2023, 13 patients were included in an HPN program. The primary underlying pathology was acute mesenteric ischemia. The median age of the starting HPN was 44 years old. Most are submitted to several surgeries of extensive intestinal resection with posterior intestinal reconstruction. Five of the 13 patients have died while on HPN for a median of 42 months. The causes of death HPN-related were catheter sepsis, endocarditis with cardiac failure, or hepatic failure. One patient died due to underlying pathology: pelvic abscesses and bleeding related to radiotherapy. Eight patients remain alive with a median time of HPN of 173 months. During the HPN support, the most frequent complications were venous catheter infection and venous territory thrombosis. None of the eight patients alive have hepatic failure. Two patients recently started teduglutide, with good tolerance, and need reduction of HPN support. All these eight patients have a satisfactory quality of life (parenteral support needs range between five to two nutrition bags per week). Conclusion: HPN remains the gold standard of SBS/CIF treatment, although Teduglutide may reduce HPN needs and HPN complications and provide a better quality of life. An HPN multidisciplinary healthcare group support is essential to ensure these patients' survival and quality of life. Keywords Short bowel Syndrome, Chronic Intestinal failure, Home Parenteral Nutrition, Teduglutide, Complications of Parenteral Support.

Three autonomous communities have been the ones that, in the 2022-2023 season, anticipated the document approved by the Public Health Commission, recommending influenza vaccination for all children aged 6 to 59 months. The main objective of this work is to evaluate the attitude of healthcare professionals towards the first universal vaccination campaign in our region, as well as the acceptability of the vaccines used and the attitude towards the piloting of school vaccination. Cross-sectional, survey-based, descriptive study. All healthcare professionals involved in the campaign were invited to participate. The 91.9% of surveyed professionals thought that flu vaccination from 6 to 59 months was important or very important. 89.8% had previous experience regarding the intramuscular vaccine. The professionals valued the intranasal vaccine significantly more positively; however, there were no differences when asking for each of the vaccines without comparison. The inhaled vaccine was preferred by 97.5% for the following campaign. Piloted school vaccination showed 75% acceptance. The inhaled vaccine was preferred by most professionals and the piloted school vaccination was highly accepted, and independently associated to the importance of vaccination as considered by physicians, being a medical doctor, and participation in the pilot program.

The paper draws attention and opens the debate on major societal issues that concern not only Muslims but human societies, at large, because of their profound implications, afflictions, and their present and future transitive dimensions. The paper discusses two major issues that have attracted a great deal of attention in the recent past: wealth and income disparities, and global indebtedness. Four remedies have stressed upon and/or proposed to eradicate and/or lessen some of the burdens of these problems have been thoroughly examined. These are: - Stripping commercial banks of their power to create money out of thin air (i.e., Ex Nihilo). Thus, reviving financial reform in line with the spirit of the call for the “Establishment of a National Bank [in England]” in the 1820s by the renowned British economist David Ricardo (1772-1823). The Bank of England was a private commercial entity at that time. - Prohibiting of ‘harmful’ speculation activities in financial and economic transactions and/or imposing hefty taxes on transactions relating to such activities. The implementation of such a policy requires and clear-cut distinction between the ‘harmful’ and ‘non-harmful’ speculative activities in financial and non-financial markets. - Levying adequate and fair taxes on the wealthiest upper class at the global scene. Calls for such a policy is on rise in the past few years. For instance, “Speakers at the European Development Days summit in Brussels, [in 2017], said that a just tax system should be “at the heart” of the development debate, and that more transparency is needed to ensure that companies pay their fair share. Tax avoidance schemes used by multinational companies, such as moving profits to tax havens, result in global losses of around $650 billion a year in tax receipts — with developing countries losing $200 billion, according to a study from the International Monetary Fund”, (Edwards, 2017; Crivello et al., 2015, p. 21) - Establishing a neutral legislative and tax regimes for different modes of financing. Thus, providing ‘a level playing field’ for equity and debt modes of financing due to the current biasness of the tax regimes to debt-based financing instruments as it has been documented in various studies carried out by the IMF, the European Commission, and other international prominent bodies.

(1) Telemedicine in diabetic retinopathy (RD) screening is effective but does not reach the entire diabetes population. The use of portable cameras and artificial intelligence (AI) can help diabetes screening. (2) Methods: We evaluated the ability of two handheld cameras, one based on a smartphone and the other on a smartscope, to obtain images comparing OCT. Evaluation was done in two stages, the first by two retina specialists and the second using an artificial intelligence algorithm that we developed. (3) Results: The retina specialists report that the smartphone images must mydriasis in all cases compared to 73.05% of the smartscope images and 71.11% of the OCT images. Images were ungradable in 27.98% of the retinographs with the smartphone and 7.98% with the smartscope. The detection of any-DR using the AI algorithm showed that the smartphone obtained lower recall values (0.89) and F1scores (0.89) than the smartscope, with 0.99. The detection of Mild-DR using the smartphone also obtained low results (146 retinographs) compared to the smartscope (218 retinographs). (4) Conclusions: The use of handheld devices together with AI algorithms for reading retinographs can be useful for DR screening, although these devices need to improve the ease image acquisition through small pupils.

Macrophages as a source and target of GDF-15

The temporary immersion system bioreactor named GreenTray®[2], [3]presents advantages over the existing ones. Firstly, there is no need to use forceps to move the shoots or plantlets in or out of the recipient, neither the use of scalpel to divide them. Secondly, the basis of the shoot can remain in the GreenTray® and can sprout again in several cycles of growth. These two characteristics reduce the costs in the process of micropropagation. Besides, shoots or plantlets development is enhanced by the aeration of the recipient, thus enriching with CO2 the recipient atmosphere. The chapter describes and provides images and values of interest in (1) the micropropagation process of some commercial Prunus or Pyrus rootstocks; (2) the plantlet growth under autotrophic conditions; and (2) the inoculation of plants with pathogens that reproduce in vitro the symptoms observed in vivo, using the GreenTray® bioreactor.

Globalized in 1995 through the TRIPs Agreement, humanity’s dominant mechanism for encouraging innovations involves 20-year product patents, whose monopoly features enable innovators to reap large markups or licensing fees from early users. Exclusive reliance on this reward mechanism in the pharmaceutical sector is morally problematic for two main reasons. First, it imposes a great burden on poor people who cannot afford to buy patented treatments at monopoly prices and whose specific health problems are therefore neglected by pharmacological research. Second, it discourages pharmaceutical firms from fighting diseases at the population level with the aim of slashing their incidence. These problems can be much alleviated by establishing a supplementary alternative reward mechanism that would enable pharmaceutical innovators to exchange their monopoly privileges on a patented product for impact rewards based on the actual health gains achieved with this product. Such an international Health Impact Fund (HIF) would create powerful new incentives to develop remedies against diseases concentrated among the poor, rapidly to provide such remedies with ample care at very low prices, and to deploy them strategically to contain, suppress, and ideally to eradicate the target disease. By promoting innovations and their diffusion together, the HIF would greatly enlarge the benefits, and thereby also the cost-effectiveness, of the pharmaceutical sector, in favor of the world’s poor especially.

We present a case report of a young patient with pectus carinatum who experienced a small right apex pneumothorax and exhibited Brugada patterns on electrocardiogram tracing. This is the first clinical case reporting Brugada pattern presentation in both a patient with pectus carinatum and a small pneumothorax. We conducted a clinical, anatomical, and electrocardiographic analysis to explore a physiopathological explanation for these findings, considering our patient had no history or clinical signs of Brugada Syndrome. We conclude that: 1. Pectus carinatum may create a window that facilitates the less resistive measurement of cardiac action potentials; 2. Small pneumothoraces can induce modifications in the cardiac electrical signal detected by surface electrodes, and pectus carinatum could unmask these modifications; and 3. Surface electrodes may measure subepicardial potentials that include and are modified by adjacent pericardial tissues, potentially resulting in alterations in transmural potential differences, thus producing fictitious Brugada patterns. Similarly, there is a possibility that the right ventricular outflow tract may be included within the subendocardial potentials.

Cotton fiber, a crucial and sustainable resource for global textile production, undergoes a complex five-stage developmental process, encompassing initiation, elongation, transition, secondary cell wall biosynthesis, and maturation. These elongated single-cell fibers originate from the outer ovule epidermis. The development of cotton fibers involves intricate changes in gene expression and physiological processes, resulting in a nearly pure cellulose product vital for the global cotton industry. Decoding genes associated with fiber development enhances our understanding of cotton fiber mechanisms and facilitates the cultivation of varieties with enhanced quality. In recent decades, advanced omics approaches, including genomics, transcriptomics, and proteomics, have played a pivotal role in identifying genes and gene products linked to cotton fiber development, including the MYB transcription factor family which coordinates cotton fiber development. Molecular studies have revealed transcription factors like MYB, WRKY, Homeodomain Leucine Zipper (HD-ZIP) and basic Helix-Loop-Helix (bHLH) influencing fiber initiation and elongation. The intricate interplay of phytohormones like auxin, gibberellic acid (GA), brassinosteroid (BR), jasmonic acid (JA), ethylene, abscisic acid (ABA), and cytokinin is explored, providing a comprehensive perspective on shaping cotton fibers. Numerous candidate genes and cellular processes affecting various aspects of fiber development hold promise for genetic engineering or marker-assisted breeding to improve fiber quality. This review presents a comprehensive overview of key achievements in cotton molecular biology, with a specific emphasis on recent advancements in understanding transcription factors and phytohormones involved in cotton fiber initiation and elongation.

The process of oxygenic photosynthesis is primarily driven by two multiprotein complexes known as photosystem II (PSII) and photosystem I (PSI). PSII facilitates the light–induced reactions of water–splitting and plastoquinone reduction, while PSI functions as the light–driven plastocyanin-ferredoxin oxidoreductase. In contrast to the highly conserved structure of PSII among all oxygen–evolving photosynthetic organisms, the structures of PSI exhibit remarkable variations, especially for photosynthetic organisms that grow in special environments. In this review, we make a concise overview of the recent investigations of PSI from photosynthetic microorganisms including prokaryotic cyanobacteria and eukaryotic algae from the perspective of structural biology. All known PSI complexes contain a highly conserved heterodimeric core; however, their pigment compositions and peripheral light-harvesting proteins are substantially flexible. This structural plasticity of PSI reveals the dynamic adaptation to environmental changes for photosynthetic organisms.

Brain aging causes a wide variety of changes at molecular and cellular levels, leading to the decline of cognitive functions and increased vulnerability to neurodegenerative disorders. The research aimed at understanding the aging of the brain has made much progress in recent decades. Technological innovations such as single-cell RNA-sequencing (scRNA-seq), proteomic analyses, and spatial transcriptomic analyses have facilitated the research on the dynamic changes occurring within neurons, glia, and other cells along with their impacts on intercellular communication during aging. In this review, we introduce recent trends of how neurons and glia change during aging and discuss the impact of the brain microenvironment such as the blood-brain barrier (BBB).

The valorization of aquaculture/fisheries processing by-products, as well as unavoidable/unwanted catches and discards in Greece is currently an underutilized activity despite the fact that there are several best practices in Northern Europe and overseas. One of the main challenges is to determine whether the available quantities for processing are sufficient to warrant valorization of discards and fish side streams. This is the first attempt to systematically record and analyze the available quantities of fish by-products and discards in Greece in a spatial and temporal way in an effort to create a national exploitation Master Plan for the valorization of this unavoidable and unwanted biomass. A thorough survey conducted within the VIOAXIOPIO project unveiled a substantial biomass of around 19,000 tonnes annually that could be harnessed for valorization. Furthermore, the production of various High Added Value Biomolecules (HAVB) was investigated, and experimental trials were conducted to assess the potential yields and the collected data were used to formulate four valorization scenarios.

Introduction: The association between epilepsy and myasthenia gravis has rarely been reported, and only in small case series. Objective: To report the frequency of epilepsy and myasthenia gravis and to describe a case series of patients with myasthenia gravis and epilepsy, focusing on their clinical characteristics and searching for a possible physiopathological mechanism. Methods: A retrospective, observational, adult center study was conducted in 2022. Patients were recruited from the database of the outpatient clinic of the Myasthenia Gravis unit and Epilepsy unit. Results: Five patients were included. Frequency of epilepsy in the myasthenia gravis cohort was 5/469 (1.1%), and of myasthenia gravis in the epilepsy cohort was 5/1432 (0.35%). All patients suffered focal epilepsy, mainly fronto-central, and drug-resistant in half of them. Myasthenia gravis was generalized and with exacerbations in half of them. Three patients were thymectomized. Other autoimmune diseases were found in 2 (40%). Epilepsy onset preceded myasthenia gravis onset in all patients. Both diseases were considered autoimmune-related in 3/5 (60%). Conclusion: Epilepsy and myasthenia gravis are only infrequently associated. In adult patients, epilepsy onset precedes myasthenia onset in most cases. In some cases, epilepsy has an autoimmune aetiology and coexists with other autoimmune conditions.

As artificial intelligence (AI) makes significant headway in various arenas, the field of Speech-Language Pathology is at the precipice of experiencing a transformative shift towards automation. This study introduces QuickPic AAC, an AI-driven application designed to generate topic-specific displays from photographs in a "just-in-time" manner. Using QuickPic AAC, this study aimed to (a) determine which of two AI algorithms (NLG-AAC and GPT-3.5) results in greater specificity of vocabulary (i.e., percentage of vocabulary kept/deleted by clinician relative to vocabulary generated by QuickPic AAC; percentage of vocabulary modified); and to (b) evaluate perceived usability of QuickPic AAC among practicing speech-language pathologists. Results revealed that the GPT-3.5 algorithm consistently resulted in greater specificity of vocabulary and that speech-language pathologists expressed high user satisfaction for the QuickPic AAC application. These results support continued study of the implementation of QuickPic AAC in clinical practice and demonstrate the possibility of utilizing topic-specific displays as just-in-time supports.

The global antibiotic resistance crisis, driven by antibiotic overuse and misuse, is multifaceted. This study aimed to assess the microbiological and genetic characteristics of raw retail pork meat, including the isolation, antibiotic susceptibility testing (AST), whole genome sequencing (WGS) of selected indicator bacteria, antibiotic residue testing, and metagenomic sequencing. Samples were purchased from 10 randomly selected retail stores in Gauteng, South Africa. Samples were aseptically separated, with a portion sent to an external laboratory for isolating indicator bacteria and antibiotic residue testing. Identification of the isolated bacteria was reconfirmed using matrix-assisted laser desorption/ionization-time of flight mass spectrometry (MALDI-TOF MS). AST was performed using the Microscan Walkaway system. WGS and metagenomic sequencing were performed using the Illumina NextSeq 550 instrument. The isolated E. coli and enterococci exhibited little phenotypic resistance, with WGS revealing tetracycline resistance genes. Isolated bacteria and meat samples all harboured tetracycline resistance genes, and the antibiotic residue concentrations were within acceptable limits for human consumption. In the metagenomic context, most identified bacteria were of food/meat spoilage and environmental origin, with the resistome analysis primarily indicating beta-lactam, tetracycline and multidrug resistance genes. Further research is needed to understand the broader implications of these findings on environmental health and antibiotic resistance.

Two new dimacrolide sesquiterpene pyridine alkaloids (DMSPAs), dimacroregelines A (1) and B (2), were isolated from the stems of Tripterygium regelii. The structures of both compounds were characterized by extensive 1D and 2D NMR spectroscopic analyses, as well as HRESIMS data. Compounds 1 and 2 are two rare DMSPAs possessing unique 2-(3′-carboxybutyl)-3-furanoic acid units forming the second macrocyclic ring, representing the first example of DMSPAs bearing an extra furan ring in their second macrocyclic ring system. Compound 2 showed inhibitory effects on the proliferation of human rheumatoid arthritis synovial fibroblast cell (MH7A) at a concentration of 20 μM.

In principle, modular or integral character of manufacturing lines depends on topological designs of products and determined operation tasks. On the other hand, in specific situations there is an articulated need for modular design in smart manufacturing systems, since modular layouts are a crucial step towards agile production via smart manufacturing. The aim of this paper is to explore how the modular layout relates to manufacturing lead time (MLT) and to operational complexity of smart manufacturing systems. For this purpose, topologically different models of alternative process layouts were simulated and tested, while MLT values were obtained using Tecnomatix Plant Simulation. Obtained positive findings of this research could be useful not only in selection of the most suitable process design from the alternative ones, but especially in deepening knowledge and better understanding of the concept of optimal network modularity.

Water scarcity is a significant challenge facing Jordan today. It is a challenge in all areas that use water, and it has become certain that water is the critical factor in the population/resources equation. The water resources in Jordan have become limited with the noticeable increase in the population, mostly resulting from forced migrations in neighboring countries because of the wars and until our time. The rising natural population growth rate, along with the massive influx of refugees, has turned into a state of disproportion between the daily consumption of the population and the amount of water available. That Jordan shares most of its surface water resources with neighboring countries has exacerbated the situation. The current use of water already exceeds its renewable supply. Excessive withdrawal from aquifers, which leads to a lowering of the water table and deterioration in water quality, covered the deficit. This paper focuses on assessing the water situation in Jordan, mainly evaluating this problem and the solution being considered, the true basis for a sustainable water solution requires awareness by the population, and several governmental and non-governmental organizations are actively involved in educating residents about water shortages. The most important and 'actionable' elements of comprehensive water solutions are discussed in this paper, and these elements exist, develop extra water supplies, water harvesting, water desalination, proper wastewater reuse in the agricultural sector, and reduce the demand for drinking water. This research provides specific recommendations to address the shortage of water resources in the Kingdom and highlights the importance of water conservation and optimal use.

To scientifically and effectively evaluate the service capacity of expressway service areas (ESAs) and improve the management level of ESAs, we propose a method for the recognition of vehicles entering ESAs (VeESAs) and estimation of vehicle dwell times using ETC data. First, the ETC data and their advantages are described in detail, and then the cleaning rules are designed according to the characteristics of the ETC data. Second, we established feature engineering according to the characteristics of VeESA, and proposed the XGBoost-based VeESA recognition (VR-XGBoost) model. Studied the driving rules in depth, we constructed a kinematics-based vehicle dwell time estimation (K-VDTE) model. The field validation in Part A/B of Yangli ESA using real ETC transaction data demonstrates that the effectiveness of our proposal outperforms the current state of the art. Specifically, in Part A and Part B, the recognition accuracies of VR-XGBoost are 95.9% and 97.4%, respectively, the mean absolute errors (MAEs) of dwell time are 52 s and 14 s, respectively, and the root mean square errors (RMSEs) are 69 s and 22 s, respectively. In addition, the confidence level of controlling the MAE of dwell time within 2 minutes is more than 97%. This work can effectively identify the VeESA, and accurately estimate the dwell time, which can provide a reference idea and theoretical basis for the service capacity evaluation and layout optimization of the ESA.

Abstract: The VSI represents a significant advancement in the assessment of gastrointestinal-specific anxiety among patients with Irritable Bowel Syndrome (IBS) and other Chronic Inflammatory Bowel Diseases (IBD). However, an Italian version of the instrument is not yet available for the reference population. This study utilized a national sample of 500 individuals, including healthy controls and patients with Ulcerative Colitis and Crohn's Disease, to test the validity and reliability of the Italian VSI. Using back-translation methodology to ensure translation fidelity, the research applied a questionnaire and the VSI through an online format to 500 participants. Data analysis revealed that the Italian VSI had excellent psychometric properties, demonstrating high internal consistency (Cronbach’s α = 0.95) and construct validity. The scale proved sensitive in detecting significant differences in visceral sensitivity among groups, highlighting its utility as a clinical and research assessment tool. Specifically, the Italian VSI exhibited a unidimensional factorial structure and maintained a strong correlation with other measures of anxiety and the severity of gastrointestinal symptoms, confirming its role in enhancing the understanding and management of IBS and IBD in Italy.

Network Function Virtualization (NFV) allows for the dynamic provisioning of Virtualized Network Functions, adapting services to the complex and real-time network environment for enhanced network performance. Despite the benefits of NFV, virtual network functions (VNFs) migration and the energy consumption pose significant challenges due to the dynamic nature of the physical network, especially in the edge-cloud continuum network. Currently, people tackle this challenge by predicting the network traffic and then proactively migrating the VNFs using the predicted values. There are two challenges here. First, when SFCs belong to different network service providers, the historical network traffic data is held by the service providers, and they are reluctant to share the historical data due to privacy concerns. Without the historical network traffic data of each SFC, the resource provider that owns the underlying network cannot effectively predict the network traffic; in addition, without the feedback of the migration results of the underlying physical network, the network traffic prediction will be difficult to match the needs of the physical network. In this manuscript, we solve the problem of network traffic prediction in the NFV-based edge-cloud continuum network for multiple network service providers. We aim to improve migration performance and reduce energy consumption while ensuring resource and latency requirements. To protect the privacy of each network service provider, we apply an FL algorithm. After that, to improve the migration performance, we tailor the loss function. In the loss function, factors such as the number of migrations, the number of migration failures, and the energy consumption of the NFV-based edge-cloud continuum network are added. Additionally, to obtain the results of the SFC migration, we develop a mathematical model for the problem of multiple network service providers in the NFV-based network. The effectiveness of our algorithm is evaluated through extensive simulations, and the results show a significant reduction in the number of migrated nodes and energy consumption while improving the SFC acceptance ratio compared to state-of-the-art schemes which only use the difference between predicted and actual flows to define the loss function.

We document for the first time epsilon waves on the electrocardiogram of a patient with Dravet syndrome (DS) who does not exhibit structural cardiac pathology. DS, a severe form of pediatric epilepsy, involves mutations in the SCN1A gene, which disrupt sodium ion flow and increase the risk of sudden unexpected death in epilepsy. The epsilon waves, typically associated with arrhythmogenic right ventricular dysplasia, may also suggest a link between neuronal and cardiac dysfunctions. In our case, the epsilon waves appear to originate from abnormalities in sodium channels rather than structural changes in the myocardium. This finding underscores the importance of assessing both neurological and cardiac manifestations in patients with severe epilepsy, opening new avenues for the research and treatment of these interactions in DS.

The abundance of information in academic articles, reports, and studies can make it challenging for researchers to gain insights from the existing literature. To address this issue, there is a growing demand for tools that can help researchers effectively parse and analyze large volumes of data. One such tool is DataDiscoveryLab, a software system that utilizes computer vision algorithms and NLP techniques to parse academic articles into text and figures, creating three separate databases. These databases allow researchers to quickly identify articles that may be relevant to their research questions, gain a deeper understanding of the research presented, and analyze visual data. The integration of article mining and computer vision in the DataDiscoveryLab software system provides researchers with a powerful tool for navigating the vast amount of scientific literature available today. Yet, as we will discuss in the latter papers these databases’ purpose is to create a bridge between researchers’ data and practically unlimited scientific publications. Yet, in this article, we will discuss how we plan to do that, and our efforts on integrating deep learning modes. After all, unlike already existing AI models, DataDiscoveryLab can be their combination and the first Generative AI in academia that can encompass every part of the natural sciences.

Background/Objectives: Caregivers play an important role in supporting care recipients to navigate their health needs including adherence to dietary recommendations which are complex and multifaceted. The study aimed to i) describe the nutrition knowledge of caregivers of people with chronic kidney disease (CKD), and ii) explore caregivers’ perception of their role in providing healthy meals and nutrition support for care recipients. Methods: Caregivers (n=78) of people with stage 1-5 CKD or post-transplant were recruited from a single centre. A sequential mixed-methods approach was used. Nutrition knowledge was assessed with the revised General Nutrition Knowledge questionnaire. Theory informed semi-structured interviews in a sub-sample (n=12) explored caregiver perception. Results: Most caregivers were female (75.6%) caring for a male care recipient (87%; aged 74 (66;80) yrs.). Caregivers (75.6%) provided a meal ≥6 times/week to their care recipient and had moderate nutrition knowledge (66.1 (60.5; 73.9) %). Four themes emerged describing caregivers’ perception on meal provision and nutrition support including i) food literacy skills are valued, ii) social support is important, iii) caregivers’ sense of social responsibility, and iv) meal provision is complex and dynamic. Conclusions: Caregivers have moderate nutrition knowledge; they want to provide healthy meals and support to care recipients to adhere to dietary recommendations. Targeted, co-designed nutrition education programs for caregivers may enhance nutrition care delivery to people with CKD.

Introduction: Type 1 diabetes mellitus is a chronic disease of autoimmune etiology that is highly prevalent in childhood. In the last decade, the possibility of using the Bacillus Calmette-Guérin vaccine for the treatment of this disease has been studied thanks to its immunomodulatory action . Objectives: The objective of this work is to carry out a systematic review of the available scientific evidence on the relationship between the tuberculosis vaccine and the treatment of diabetes in childhood. Secondarily, the aim is to study the incidence of Type 1 Diabetes Mellitus in a cohort of children from the Basque Country according to whether or not they have received the vaccine. Methods: An exhaustive bibliographic search has been carried out on the evidence available to date. For the epidemiological study in Euskadi, a comparison of accumulated incidences between vaccinated and unvaccinated population groups was made. Results: According to the literature analyzed, There is more and more evidence about the possible use of the tuberculosis vaccine in Type 1 Diabetes Mellitus. The results of our study were not conclusive, but we believe that it is necessary to continue with long-term studies to eliminate biases. Conclusions: The Bacillus Calmette-Guérin vaccine could be used for the treatment of autoimmune, allergic, infectious or oncological processes, although more studies are still necessary in this regard.

Cities require flexible and participatory planning methodologies to address complex and evolving urban challenges. In Italy, the legislative framework is defined at the Regional level, according to the National laws and jurisprudence. The Lombardy region introduced the Planning Document (PD) in the Territorial Government Plan (PGT), as a strategic tool capable of adapting to changes. Based on a strategic vision, this document is useful to guide concrete actions for urban transformation, actively involving stakeholders, including citizens. The PD has the role to translate the political program into an urban planning design. So, the role it has is both technical and political. The political dimension is usually deepened in the strategic component of the document. Following the formation process of the whole city plan, the authors define the key strategies in the PD for a healthier urban future for the city of Voghera. It emerges as a balanced urban development that combines economic growth, environmental preservation, and community well-being. In the paper the authors synthesize the Voghera’s PD as an example of strategic planning that interacts with the practical planning actions and that guides both the public and the private decisions about the city development towards a healthier city.

Maintaining sufficient levels of plant nutrients in the soil and controlling certain heavy metals, which can be toxic to the environment, are critical to ensure sustainable agricultural production. The study aimed to assess the linkage of crop-specific agricultural practices established by farmers in the Kvemo Kartli region (Georgia) with metal accumulation in soils of agricultural lands being subject to influence from polluted irrigation water in the past. In particular, we tried to identify the primary sources of micronutrients, including iron (Fe), copper (Cu), manganese (Mn), nickel (Ni), and zinc (Zn), and toxic elements such as cadmium (Cd) and lead (Pb), and share of the contaminated irrigation water and other factors related to agricultural practices under different land uses, such as intensive and extensive arable farming, vineyards, orchards, and permanent pastures having the least disturbed soil. Based on principal component analysis, five primary sources were identified and categorized according to farmers' interviews and previous studies conducted in the region. The results showed that increased concertation of plant-available Cu, Zn, Cd and Pb were mainly associated with irrigation water and intensive use of fungicides; Fe, Mn, and Ni were closely linked to several factors, such as the mineralogical composition of soils, mineral and organic fertilizers inputs, and atmospheric deposition from diffuse sources, where exhausts from transport are probably the primary source. During our study, we attempted to differentiate irrigation water inputs from fungicides using simulation based on irrigation pattern and irrigation water quality on the one hand and fungicide application rate and their metal content on the other. The simulation revealed that the intensive application of fungicides, especially in vineyards, is more significant in enriching soils with Cu and Zn than irrigation water. Identification of factorial dependences was supported by statistical analysis and application of a number of contamination assessment methods: Contamination Factor (CF), Pollution Load Index (PLI), single-factor Pollution Index (PI), Nemerow’s comprehensive pollution index (PIN), Enrichment Factor (EF), and Geo-Accumulation Index (Igeo). Applied environmental indices indicate that the soils under the former and existing vineyards are the most enriched with Cu and Zn, highlighting the significance of agricultural practices on heavy metals accumulation in soils of agricultural lands.

Reviewed are recent efforts leading to chemo-enzymatic syntheses of strongly fluorescent ribosides of nucleobase analogs, potentially applicable in analytical biochemistry and cell biology. Described are syntheses and properties of fluorescent purine, 8-azapurine and etheno-purine ribosides, obtained using various types of the purine nucleoside phosphorylase (PNP) as catalysts of ribosylation, and -ribose-1-phosphate (r1P) as a second substrate. In several instances, the ribosylation sites were different than the canonical purine N9. Some of the obtained ribosides show fluorescence yields close to 100%. Their main applications are assays of PNP, nucleoside hydrolases, and other enzyme activities both in vitro and, possibly, within the living cells, using fluorescence microscopy.

In this article, we describe a simple procedure for evaluating the sterility of nutrient media using a shear-horizontal surface acoustic wave (SH-SAW) biosensor. We used the SH-SAW biosensor platform to monitor the time-dependent phase responses of the material for the media that binds to a monolayer of 3-mercaptopropanyl-N-hydroxy succinimide on the biosensor surface. Increases in the phase shift less than 50% of the starting phase shift recorded 180 minutes after the sterilization indicate a successful sterility test of the media. Our devices were then applied to sterility testing using a viable Escherichia coli (E. coli) K-12 solution to confirm our hypothesis. Filtered LB Broth was the negative control, and a 24-hour culture of E. coli was the positive control. Before testing, the cell solution was pelleted, the media decanted and then replaced with a 1x phosphate-buffered saline solution (1x PBS). Since we know that the N-hydroxysuccinimide residues will bind to amine groups, only in cases where microbial species are present will the surface binding increase greater than 50%. We confirmed our hypothesis using SH-SAW biosensors and overnight E. coli cultures. The sensitivity for our 250 MHz quartz SH-SAW sensors was calculated based on the response from the E. coli K-12 solution over the linear dynamic range, which appears to be 2x104 – 2x107 CFU per ml and has a sensitivity of S = 1.655x105 o m2 Kg-1. The limit of detection (LOD) for these sensors was calculated to be approximately 2x10-9 grams (g) which is estimated to be approximately 2,000 Escherichia coli (E. coli) K-12 cells. However, the sensitivity and insertion loss remained approximately unchanged before and after coating the sensor with 3,3'-Dithiobis(succinimidyl) Propionate (DSP).

Food insecurity remains a significant developmental challenge, particularly in rural areas, despite ongoing efforts to mitigate it. To better understand the persistence of this issue, this study investigates the causes of household food insecurity and the coping strategies employed by households in Zorkor Goo, Zorkor Kanga, and Zorkor Kadaare communities within the Bongo District of Ghana’s Upper East Region. A descriptive cross-sectional survey was conducted, sampling 196 households systematically from these communities. Data were collected through a structured questionnaire covering socio-demographic factors, causes of food insecurity, household coping strategies, and dietary intake. The analysis was performed using SPSS (Version 21.0), with food security status and dietary intake assessed via the FANTA Household Food Insecurity Access Scale (HFIAS) and Food Consumption Score, respectively. The study identified key factors contributing to food insecurity, including soil infertility, poor rainfall patterns, food spoilage, extravagant funerals, large family size, high unemployment, and lack of education. Major coping strategies among households included meal skipping, reducing meal size and frequency, migration, asset sales, and basket weaving. The findings revealed that 96.4% of households were severely food insecure, and over two-thirds (67.3%) exhibited poor dietary consumption. Notably, household employment levels, education, and food consumption scores were significantly associated with food insecurity (P<0.001). These findings underscore the need for targeted interventions addressing the root causes of food insecurity and enhancing household resilience in these communities.

Distributed Denial of Service (DDoS) is among the commonly used type of network attacks, particularly aimed at the IoT devices in the emerging future wireless services specially for strictly latency-limited applications. DDoS attacks pose serious threats for many entrepreneurial businesses as they can prevent legitimate customers from accessing network resources of corporate websites, demanding intelligent analytics prior to entertaining a service request. DDoS involves exploiting the vulnerability of IoT devices by launching distributed multi-point attacks to generate high traffic by flooding the network of victims. The consequences of DDoS attacks could be worst in any Software-Defined Networking (SDN) than in traditional networks because SDN is configured as centralised architecture, failing to address the weaknesses current paradigm. However, SDN can play a crucial role in mitigating the effects of DDoS attacks as it bears the features of easy programmability, manageability, flexibility, and scalability. In this manuscript preliminary framework to detect DDoS attacks by mitigating their threats in an SDN architecture is presented. The authors propose a defense mechanism that uses OpenFlow and sFlow to mitigate the effects of DDoS attacks. The initial results show that the proposed model can minimize efficiently the consequences of DDoS attacks in an SDN type of architectural paradigm.

Epithelial ovarian cancer (EOC) has not significantly benefited from advances in immunotherapy, mainly because of the lack of well-defined actionable antigen targets. Using proteogenomic analyses of primary EOC tumors, we previously identified 91 aberrantly expressed tumor-specific antigens (TSAs) originating from unmutated genomic sequences. Most of these TSAs derive from non-exonic regions, and their expression results from cancer-specific epigenetic changes. The present study aimed to evaluate the immunogenicity of 48 TSAs selected according to two criteria: presentation by highly prevalent HLA allotypes and expression in a significant fraction of EOC tumors. Using targeted mass spectrometry analyses, we found that pulsing with synthetic TSA peptides leads to a high-level presentation on dendritic cells. TSA abundance correlated with the predicted binding affinity to the HLA allotype. We stimulated naïve CD8 T cells from healthy blood donors with TSA-pulsed dendritic cells and assessed their expansion with two assays: MHC-peptide tetramer staining and TCR Vβ CDR3 sequencing. We report that these TSAs can expand sizeable populations of CD8 T cells and, therefore, represent attractive targets for EOC immunotherapy.

With increasing air and sea temperatures, the thermodynamic environments over the oceans become more favourable for the development of intense tropical cyclones (TCs) with rapid intensification (RI). In fact, the number of TCs undergoing RI is rising (Zhao, et al., 2018; Bhatia, et al., 2019; Song, et al., 2020; Hong & Wu, 2021; Liu, et al., 2022). RI over coastal sea areas before landfalling is particularly impactful and threatening to coastal lives and properties. There have been studies showing that offshore areas within 400 km of the coastline have experienced a significant increase in RI events with the count tripling from 1980 to 2020 (Li et al., 2023). The south China coastal region consists of highly densely populated cities especially the Pearl River Delta (PRD) region. Intense TCs maintaining its strength or RI of TCs close to the coastal region presents substantial forecasting challenges. This study investigates the effect of sea surface and subsurface temperature and salinity on the intensification of five TCs, namely Super Typhoons Hato in 2017 and Mangkhut in 2018, Typhoon Talim, Super Typhoon Saola and Severe Typhoon Koinu in 2023, which significantly affected the south China coastal region and triggered high TC warning signals in Hong Kong. The analysis utilized the Hong Kong Observatory (HKO) TC track and intensity data, along with the sea temperature and salinity profiles generated using the China Ocean ReAnalysis version 2 (CORA2) of the National Marine Data and Information Service (NMDIS) of China. While high sea surface temperature (SST) of 30°C or above, low surface sea surface salinity (SSS) of 34 psu or below, and strong salinity stratification of at least 0.8 psu per 100 m depth may offer useful hints for predicting RI, they are part of a broader set of contributing factors. This study represents the initial documentation of sub-surface salinity's impact on intense TCs over the South China Sea (SCS) in recent years and will encourage further research to refine forecasting RI of TCs before making landfall near PRD taking into account the effect of freshwater from the Pearl River.

As modern systems are becoming more complex their control strategy cannot longer relay only on measurement information that usually comes from probes but also from mathematical models. Those systems models can lead to unbearable computation times due to their own complexity, turning the control process non-viable, which leads to the implementation of surrogate models that enable to achieve estimates within acceptable time to take decisions. A control trained with Deep Reinforcement Learning algorithm, using a Physics-Informed Neural Network to obtain the temperature map on the following time step, replaces the need of running Direct Numerical Simulations. On this work we considered an 1D heat conduction problem, which temperature distribution feeds a control system to activate a heat source aiming to obtain a constant, previously defined, temperature value. With this approach, control training becomes much faster without the need of performing numerical simulations or laboratory measurements, as well the control is taken based on Neural Network enabling its implementation on simple processors to edge computing.

With the exponential growth of internet usage and mobile devices, the volume of user behavior data has surged, offering significant opportunities and challenges for businesses. This paper explores user behavior analysis in the context of big data, highlighting its pivotal role in driving innovation and strategic decision-making. We begin by discussing the importance of user behavior data and reviewing technological advancements such as machine learning, natural language processing, and data mining that enable deep insights into user behavior. Through a case study on linguistic analysis in livestreaming e-commerce, we demonstrate how text-mining techniques can correlate linguistic characteristics with sales performance, providing actionable marketing insights. We further explore the broader business applications, including personalized recommendations, user portraits, product design, and strategic decision-making. Technical and ethical challenges, such as data integration, privacy concerns, and algorithmic bias, are also addressed. The paper concludes with a discussion on future trends, such as AI and ML advancements, edge computing, IoT proliferation, and ethical AI frameworks, poised to shape user behavior analysis. Our findings underscore the transformative potential of user behavior data in enhancing business operations and user experiences, providing recommendations for future research focused on real-time analytics, privacy-preserving techniques, and ethical implications of data-driven decisions.

To improve carbon efficiency for urban logistics service system composed of a third-party logistics service provider (3PLs) and an e-business enterprise, low-carbon operation game between them was studied. Considering low carbon technology investment cost and sales expansion effect of low carbon level, profit functions for both players were constituted. Based on their different bargaining capabilities, totally 5 types of game scenarios were designed. Through analytical solution, Nash Equilibria under varied scenarios were obtained. By analyzing these equilibria, 4 major propositions were given, in which, some key variables and system performance index were compared. Results show that the best system yields could only be achieved under the fully cooperative situation; limited cooperation only for carbon emission reduction would not benefit the system performance improvement; E-business enterprise-leading game’s performance overtook 3PLs-leading ones.

Water footprint has been widely used to illustrate the consumption of water in many situations; for instance, in products, processes or regions of interest. In this work, we analyzed – using a sensitivity analysis approach – the effect of some variables in the calculation of the water footprint in the viticulture in Brazilian Serra Gaúcha (the major producing region of Brazilian Wine).The classical Penman-Monteith model for evapotransporation was considered, with uncertainties in some parameters (dead mulch covering fraction in the vineyard, maximum temperatures for some months, altitudes and latitudes of the site). The sensitivity analysis was conducted using the SAFE toolbox under Octave framework. The results indicated that the the portion of the water footprint corresponding to the evapotranspiration is more sensitive to the values of mulch covering fraction and the altitude of the site in comparison with the latitude and the maximum temperatures.

Dams fragment stream habitat and fishways around dams typically serve few species that are strong swimmers or jumpers. We test a prototype wetted ramp designed to allow upstream passage of small-bodied fishes while blocking upstream movement of invasive sea lamprey in the Laurentian Great Lakes. We tested short, smooth ramps with 5-10 mm water depth in various combinations of ramp angle, water flow and swim channel width with the aim to selectively block adult migrating sea lamprey while passing sub-adult white suckers (Catostomus commersonii) and creek chubs (Semotilus atromaculatus). Sea lamprey easily passed a 0.75 ramp at 5 angle, but very few individuals passed a similar ramp at 10 angle and none passed a longer ramp at the 5 angle. Limiting the amplitude of tailbeats in a narrow channel did not hamper lamprey or the other species. Greater water flow, and thereby greater immersion depth on the ramp fostered passage for all species. Smaller-bodied individual of creek chubs and white suckers performed best on the ramp. We show that wetted ramps could be incorporated into fishways at low-head dams to aid passage of smaller-bodied fishes while also blocking the spawning migration of adult sea lamprey.

Background/Aim: Baricitinib (BAR) is the first oral selective Janus kinase inhibitor approved in Europe for rheumatoid arthritis (RA). Real-world data are still needed to clarify its long-term benefit/risk profile. This study aimed to evaluate the effectiveness, persistence, adherence, and safety of BAR in a real-world setting. Methods: An ambispective study was conducted between October 2017 and December 2021 in RA patients starting BAR. Effectiveness was evaluated by change from baseline in the Disease Activity Score using 28-joint counts-C reactive protein (DAS28CRP), and achievement of low disease activity/remission. Drug persistence was evaluated by Kaplan-Meier analysis. Adherence was estimated by medication possession ratio (MPR) and the 5-item Compliance Questionnaire for Rheumatology. Safety was assessed by global incidence proportion and adjusted incidence rates of adverse events. Results: 61/64 recruited patients were finally analyzed, 83.6% female, 78.7% seropositive, mean age of 58.1 (15.4) years, and disease duration of 13.9 (8.3) years. 32.8% were naïve to biologics and 16.4% received BAR on monotherapy. After a median exposure to BAR of 12.4 (6.6-31.2) months (range 3.1-51.4), a significant change in DAS28CRP was observed (difference -1.2, p=0.000). A total of 70.5% and 60.7% patients achieved low disease activity or remission, respectively and 50.8% (31/61) patients remained on BAR during follow-up with a median persistence of 31.2 (9.3-53.1) months. The average MPR was 0.96 (0.08) and all patients were “good adherents” by questionnaire. 21.3% patients discontinued baricitinib due to toxicity. Conclusion: In our real-world practice, BAR demonstrated effectiveness, large persistence, high adherence to treatment and acceptable safety profile.

This study investigates the use of geopolymer technology as an alternative for the management of mine tailings, which is a serious environmental problem in mining environments including that of Arequipa region of Peru. In this study, the mixture of stabilized mine tailings with different percentages of binders (metakaolin and pumice) and their impact on the mechanical, microstructural, and toxicological properties of the synthesized geopolymers were analyzed. The ratios of mine tailings to binder material varied between 100/0 and 0/100. The activation was carried out with an alkaline solution of sodium hydroxide (10M) and sodium silicate (modulus 2.5). 50 mm cubic specimens were fabricated, and 7 mixtures with 3 replicates each were evaluated. The evaluations included compressive strength at 7, 14, 28, and 56 days of curing, chemical analysis by X-Ray Diffraction (XRD) and Fourier Transform Infrared Spectroscopy (FT-IR), microstructural characterization by Scanning Electron Microscopy (SEM/EDS), thermal behavior by thermogravimetry and differential thermal analysis (TGA/DTA) between 40°C and 1000°C, and toxicological tests by the Toxicity Characteristic Leaching Procedure (TCLP, EPA 1311) to determine the efficiency of immobilization of toxic metals. The results showed good mechanical strength, reaching 25 MPa at 7 days of curing, high microstructural stability with an average pore size of 7.21 μm, and good efficiency in the immobilization of heavy metals in geopolymers composed of 60% - 40% and 70% - 30% of the mine tailings - binders ratio, as the concentrations of As, Cd, Pb, Hg were below the established thresholds, acquiring the classification of non-hazardous materials. Geopolymers with 30 to 50% binder showed good mechanical behavior, microstructural stability, and high efficiency in the immobilization of heavy metals, complying with current regulations. Therefore, these geopolymers are suitable for various applications and in different environmental conditions.

The composition simplex (N, P, K, Ca, and Mg) of the leaf is the main scores used by different approaches like the Diagnosis and Recommendation Integrated System and Compositional Nutrient Diagnosis to study the nutrient interactions and balance in plant leaves. However, the application and validation of these concepts to grain composition remains unexplored. Contrary to foliar analysis's early intervention for nutrient deficiency detection and correction, applying this approach to seeds assesses diverse cultivars' potential, enabling anticipation of their adaptation to climate conditions and informed selection for future crops. In the present study, a collected database of more than 924 scores including the grain yield (kg ha-1) and the nutrient composition (mg kg-1) of different corn varieties is used to develop a novel nutrient-based diagnostic approach to identify reliable markers of nutrient imbalance. A 'nutrient signature' model is proposed based on the impact of the environ-mental conditions on the nutrient indices and composition (N, P, K, Ca, and Mg) of the corn grains. The yield threshold used to differentiate between low and high-yielding subpopulations is established at 12.000 kg ha-1and the global nutrient imbalance index (GNII) of 2.2 is determined using the chi-square distribution function and vali-dated by the Cate-Nelson partitioning method, which correlated yield data distribution with the GNII. Therefore, the nutrient compositions were classified into highly balanced (GNII ≤ 1.6), balanced (1.6 < GNII ≤ 2.2), and imbalanced (GNII > 2.2). In addition, we found that the Xgboost model's predictive accuracy for GNII is signif-icantly affected by soil pH, organic matter, and rainfall. These results pave the way for adapted agricultural practices by providing insights into the nutrient dynamics of corn grains under varying environmental conditions.

This paper is a part of the broader research on “Adaptation of Laws in Science” and explores the limitations and challenges involved in adapting mathematical concepts to describe natural reality in physics. Specifically, the analysis focuses on two major examples: Euler's exponential laws and spacetime dilation derived from Lorentz transformations. By examining these concepts, the paper emphasizes that some complex laws are not universally applicable for deeper studies of nature, as they originate from mathematics and are correct only for specific parts of nature to which they have been adapted. These complex laws are particularly unsuitable where there is limited information available for adaptation. Therefore, without appropriate adaptations and a deep understanding of the physical context under investigation, the direct use of complex laws can lead to incorrect results. It is essential to avoid excessive generalization of these laws, once they become part of physics, unless a corresponding adaptation to the research context can be made. Furthermore, this paper supports the correctness of relativity theories by invoking that, like Euler's exponential growth theory, they were initially mathematical concepts. However, the nature of mathematics coincided with that of the phenomena in our universe, although through certain adaptations.

This paper deals with investigation of changes in geopolymer wettability with increasing mass fraction of high-carbon fly ash and surface treatment by cold atmospheric plasma (CAP). In this study, multiple samples of geopolymers were prepared, including those with 5% and 10% of high-carbon fly ash from coal-fired power station. Wettability of samples was then measured before and after plasma treatment, both on surface and cut surface. While addition of fly ash only had low effect on the wettability, as in most cases, it only lowered the initial contact angle without speeding up the speed of soaking for compact geopolymer and actually slowed the soaking for foamed geopolymer, plasma treatment had significant impact and made the geopolymer hydrophobic.

Neuromuscular adverse events following cancer treatment with anti-programmed cell death protein 1 (PD-1) monoclonal antibodies are relatively rare, yet potentially fatal. Using the PRISMA approach, we performed a systematic review to characterize the clinical presentation, diagnostic workup, and management of neuromuscular disorders (NMDs) in patients treated with nivolumab or pembrolizumab. Sixty-three publications on 85 patients (mean age 66,9 years (range 34–86); male/female 2.6:1; 59% metastatic melanoma) were identified from selected indexing databases until June 2018. Forty-eight patients had received nivolumab and 39 pembrolizumab. The mean number of PD-1 inhibitor treatment cycles prior to onset of symptoms was 3,6 (range 1–28). Symptoms included oculomotor (47%); respiratory (43%), bulbar (35%), and proximal weakness (35%); as well as muscle pain (28%). Diagnoses were categorized as myasthenia gravis (27%), neuropathy (23%), myopathy (34%) and a combination of these (16%). After critical review of the data, however, evidence did not support the stated NMD diagnosis in 13% of cases, while up to 14% of patients had signs of additional NMDs. PD-1 inhibitor associated myasthenia was associated with cardiac complications in almost 30% of patients and with a more rapid clinical progression compared with idiopathic myasthenia. Mortality was high despite adequate treatment strategies including corticosteroid, IV immunoglobulins and plasmapheresis. In conclusion, clinical presentation of NMDs associated with PD-1 inhibitors is often atypical, with significant overlap between myasthenia gravis and myopathy; and cardiac/respiratory complications are common, leading to more severe disease courses than idiopathic myasthenia.

Based on the need for real-time sag monitoring of Overhead Power Lines (OPL) for electricity transmission, this article presents the implementation of a hardware and software system for online monitoring of OPL cables and cable sag determination. The mathematical model based on differential equations and the methods of algorithmic calculation of OPL cable sag are presented. Considering that, based on the mathematical model presented, the calculation of OPL cable sag can be done in different ways depending on the sensors used, and the presented application uses a variety of sensors. Therefore, a direct calculation is made using one of the different methods. Subsequently, the verification relations are highlighted directly and, respectively, the calculation by the alternative method, which uses another group of sensors, to generate both a verification of the calculation and the functionality of the sensors, thus obtaining a defect observer of the sensors. The hardware architecture of the OPL cable online monitoring application is presented, together with the main characteristics of the sensors and communication equipment used. The configurations required to transmit data using the ModBUS and ZigBee protocols are also presented. The main software modules of the OPL cable condition monitoring application are described, which ensure the monitoring of the main parameters of the power line and the visualisation of the results both on the electricity provider's intranet using a web server and MySQL database, and on the Internet using an Internet of Things (IoT) server. This categorisation of the data visualisation mode is done in such a way as to ensure a high level of cyber security. Starting from the mathematical model of the OPL cable sag calculation, it goes through the stages of creating such a monitoring system, from the numerical simulations carried out using Matlab to the real-time implementation of this monitoring application. The main modules of the application software are: the software module for reading quantities from the sensor network through a ModBUS Input/Output (I/O) server, the software module for real-time calculation of the OPL cable sag, the software module for read/write operations based on MySQL type data, the software module for transferring data to the user's intranet through a web server, and the software module for viewing data by authorised users based on user and password through an IoT server. The development software environments used are Matlab and Laboratory Virtual Instrument Engineering Workbench (LabVIEW).

This study explored the intricate nexus between public service provision and land use planning, with a specific focus on the conservation of local plant species in Tambon Khao Phanom, Amphoe Khao Phanom, Krabi Province. Rooted in commitment. The research framework encompasses three fundamental activities: resource survey and collection, resource conservation and utilization, and resource development planning for public services, emphasizing land use planning for local plant species conservation. This multidisciplinary approach integrates the one-map method and draws data from the Department of Land Development to formulate a comprehensive land utilization plan that optimizes land use for biodiversity conservation. This study underscores the critical synergy between public service delivery and land use planning, highlighting their collective potential to advance community well-being and sustainable development.

This research investigates the application of Fused Filament Fabrication (FFF) in producing WC-10Co hardmetals, focusing binder formulations and understanding its influence on extrusion force and the influence of printing variables on green density of the samples. By examining the interplay between different binder compositions and backbone contents, the study aims to enhance the mechanical properties of the sintered parts while reducing defects inherent in the printing process. Evidence suggested that formulated feedstocks influenced the hardness of the sintered hardmetal, not due to microstructural changes but to macrostructural responses like macro defects introduced during printing, debinding and sintering of the samples. The results demonstrate the critical role of PP-MA content in improving part density and sintered hardness, suggesting the need for specific thermal debinding protocols tailored to each feedstock. The study provides insights into the formulation of feedstocks for hardmetal FFF, proposing a path toward refining manufacturing processes for better quality and performance of 3D printed hardmetal components.

Despite the successful introduction of oral cholera vaccines, Zambia continues to experience multiple, sporadic, and protracted cholera outbreaks in various parts of the country. While vaccines have been useful in staying the cholera outbreaks, the ideal window for re-vaccinating individual’s resident in cholera hotspot areas remains unclear. Using a prospective cohort study design, 225 individuals were enrolled, re-vaccinated with two doses of Shanchol™ regardless of previous vaccination and followed-up for 90 days. Bloods collected at baseline before re-vaccination, at day 14 prior to second dosing and subsequently on days 28, 60, and 90. Vibriocidal assay was performed on samples collected at all five time points. Our results showed that anti-LPS and vibriocidal antibody titers increased at day 14 after re-vaccination and decreased gradually at 28, 60 and 90 across all the groups. Seroconversion rates were generally comparable in all treatment arms. We therefore conclude that vibriocidal antibody titers generated in response to re-vaccination still wane quickly irrespective of previous vaccination status. However, despite the observed decline, the levels of vibriocidal antibodies remained elevated over baseline values across all groups, an important aspect for Zambia where there is no empirical evidence as to the ideal time for re-vaccination.

Electrochemical methods are used for the treatment of both municipal and industrial wastewater, either independently or in conjunction with biological methods. This conjunction is used for pretreatment or posttreatment of biologically treated wastewater. In our work, we focused on the combination of these processes, where pre-electrolysis was used to produce dissolved iron before the activation process. Electrolysis was also directly introduced into the activation using either iron or carbon electrodes. The surface of one iron electrode was 32.2 cm2, the applied voltage was 21 V, and the supplied current was 270 mA. The surface of one carbon electrode was 7.54 cm2, the supplied current was 82.5 mA, and the applied voltage was 21 V. From laboratory research on the treatment of synthetic municipal wastewater using a combination of electrolysis and activation processes, it resulted that the use of iron electrodes increased the efficiency of phosphorus removal compared to its precipitation with iron salts. The electrolysis had a positive effect on the sedimentation properties of sludge and the destruction of filamentous microorganisms. Electrolysis negatively affected the respiration rates of activated sludge and the efficiency of denitrification. However, it did not have a negative impact on the nitrification activity of the sludge.

Protected areas serve as an effective mechanism usually supported by a statute to conserve and protect wildlife-rich areas worldwide. Such extensive external management needs elaborate planning, regular monitoring, and periodic assessment of results. Thus, management effective evaluation (MEE) has emerged as one of the major tools for quantifying the performance of any protected area, globally since 2006. India has successfully conducted a complete round of management effectiveness evaluation of all its terrestrial protected areas (except conservation reserves and community reserves), with 25 such areas already undergoing a repeat assessment. Simultaneously, India biennially carries out a country-wide status of forest cover in all its states and union territories. This study has correlated the trend in change of forest cover for the states that contain those 25 repeat evaluated protected areas with their change in MEE scores over the same period. Our study found a positive correlation between the change in forest cover and the change in management effectiveness score from 2005-06 to 2018-19. Owing to increased protection regimes in the PAs including the degraded areas if they make part of such areas, the habitat often shows recovery. Effective habitat conservation is thus intertwined with the monitoring and preserving the wildlife populations in the protected areas, thereby, reduction in forest cover equally impacts the management scores. However, in states where the loss in forest cover has been reported, more protected areas need to be assessed to plan complementary strategies for both habitat and species conservation.

Thunderstorms endager life and infrastructure. Accurate and precise prediction of thunderstorms are therefore helpful to enable protections measures and to reduce the risks. This manuscript presents the latest developments to improve thunderstorm forecasting in the first few hours. This includes the description and discussion of a new Julia-based method (JuliaTSnos) for the temporal extrapolation of thunderstorms and the blending of this method with the numerical weather prediction model (NWP) ICON. The combination of ICON and JuliaTSnow attempts to overcome the limitations associated with the pure extrapolation of observations wit Atmospheric Motion Vectors (AMVs) and thus increase the prediction horizon. For the blending the operational ICON-D2 is used, but also the experimental ICON-RUC, which is performed with a higher data assimilation update cycle. The blended products are evaluated against lightning data. The Critical Success Index (CSI) for the blended RUC product is higher for all forecast time steps. This is mainly due to higher resolution of the AMVs (prediction hours 0-2) and the rapid update cycle of ICON-RUC (prediction hours 2-6). The results demonstrate the potential of the rapid update cycle to improve the short term forecasts of thunderstorms. Also the transition between AMV driven nowcasting to NWP is much smoother in the blended RUC product, which points to the advantages of fast data assimilation for seamless predictions. The CSI is well above the critical value of 0.5 for the 0-2 hour forecasts. However, also with RUC the CSI drops below 0.5 as soon as the last forecast is more than 3 hours away from the last data assimilation, indicating the lack of the model physics to accurately predict thunderstorms. This lack is simply a result of chaos theory. Within this scope the role of NWP in comparison with Artificial Intelligence (AI) is discussed and it is concluded that AI could replace physical short term forecasts in the near future.