The definition of UTC in 1972 balanced the needs of the time and frequency community for a universal time scale that was traceable to the definition of frequency in the SI system of units with the needs of the astronomical community for a time scale that was closely linked to UT1, a time scale related to the rotation of Earth. The balance between these two considerations has changed very significantly since 1972, and there is widespread agreement that the method of relating UTC to UT1 should be changed by increasing the maximum tolerance between the two scales to more than the current limit of 0.9 s. I propose to realize this decision by means of an algorithmic adjustment process based on the variation in the length of the day over the previous centuries. I use these historical data to extrapolate the length of the day for a century into the future, and to compute a periodic rate adjustment to UTC based on this extrapolation. The adjustment process will not use time steps. The magnitude of the periodic rate adjustment will be re-considered every century, but the basic adjustment algorithm will not change. I suggest a maximum tolerance between UT1 and UTC that is large enough to absorb the irregular and unpredictable variations in the length of the day with respect to the long-term average increase in this value but plays no role in determining the parameters of the adjustment process that is proposed. I also propose that the adjustment be implemented at 12 UTC on 1 January since that is closest to a universal holiday in all time zones.

The increasing emergence of multidrug resistant (MDR) pathogens causes difficult-to-treat infections, with long-term hospitalizations and high incidence of death, thus representing a global public health problem. To manage MDR bacteria bugs, new antimicrobial strategies are necessary, and their introduction in practice is a daily challenge for scientists in the field. An extensively studied approach to treat MDR infections consists in inducing high levels of reactive oxygen species (ROS) by several methods. Although further clinical investigations are mandatory on the possible toxic effects of ROS to mammalian cells, clinical evaluations are extremely promising, and their topical use to treat infected wounds and ulcers, also in presence of biofilm, is already clinically approved. Biochar (BC) is a carbonaceous material obtained by pyrolysis of different vegetable and animal biomass feedstocks, at 200−1000 °C in limited presence of O2. Recently, it has been demonstrated that BC capability of removing organic and inorganic xenobiotics is mainly due to the presence of persistent free radicals (PFRs), which can activate oxygen, H2O2 or persulfate in the presence or not of transition metals by electron transfer thus generating ROS, which in turn degrade pollutants by advanced oxidation processes (AOPs). In this context, the antibacterial effects of BC containing PFRs have been demonstrated by some authors against Escherichia coli and Staphylococcus aureus, thus giving birth to our idea of the possible use of BC-derived PFRs as a novel method capable of inducing ROS generation for antimicrobial oxidative therapy. Here, the general aspects concerning ROS physiological and pathological production and regulation, and the mechanism by which they could exert antimicrobial effects have been reviewed. The methods currently adopted to induce ROS production for antimicrobial oxidative therapy have been discussed. Finally, for the first time, BC-related PFRs have been proposed as a new source of ROS for antimicrobial therapy via AOPs.

Fatigue performance and self-repairing activity of asphalt binders are two properties that highly influence the fatigue cracking response of asphalt pavement. There are still numerous gaps of knowledge to fill linked with these two characteristics. For instance, current parameters fail to fully accommodate these two bitumen phenomena. This study aims to propose a new procedure to address this issue utilizing the linear amplitude sweep (LAS) test, LAS with rest period (RP) (LASH) test, and simplified viscoelastic continuum damage (S-VECD) model. This research work used four different types of asphalt binders: neat asphalt (NA), self-healing thermoplastic polyurethane (STPU)-modified bitumen (STPB), self-healing poly (dimethyl siloxane) crosslinked with urea bond (IPA1w)-modified bitumen (IPAB), and styrene–butadiene–styrene (SBS)-modified bitumen (SBSB). Before the testing process, all the materials were subjected to short-term and long-term aging. The new procedure showed a superior capacity to analyze and accommodate all bitumen fatigue performances and self-repairing activities compared to the current method. Another finding proved that asphalt binders with higher self-restoration behavior failed to show better fatigue performance. A breakthrough finding demonstrated that asphalt binder fatigue response augmented when the RP was applied at a higher damage intensity (S) value. STPBs and IPABs reached their highest increments of fatigue response, containing 1.0% of STPU and 0.5% of IPA1w, respectively. Those augmentations were 207.54% and 232.64%, respectively.

Like other ICT communities, sustainability in software engineering is a major research and development concerns. Current research focusses on eliciting the meanings of sustainability and proposing approaches for its engineering and integration into the mainstream software development lifecycle. However, few concrete guidelines that software designers can apply effectively are available and applicable. Such guidelines are needed for the elicitation of sustainability requirements and testing software against these guidelines. This paper introduces a sustainability design catalogue to assist software developers and managers in eliciting sustainability requirements, and then in measuring and testing software sustainability. The paper reviews the current research on sustainability in software engineering which is the grounds for the development of the catalogue. Four different case studies were analyzed using the Karlskrona manifesto on sustainability design. The output from this research paper is a software sustainability design catalogue through which a pilot framework is proposed that includes a set of sustainability goals, concepts and methods. The integration of sustainability for/in software systems requires a concrete framework that exemplifies how to apply and quantify sustainability. The paper demonstrates how the proposed software sustainability design catalogue provides a step towards this direction through a series of guidelines.

This article focuses on generating an alternative in order to identify traffic officers during driving. This research employed the latest You Only Look Once (YOLO) model, using a six-phase methodology: data collection, data preparation involving resizing and labeling, implementation of various filters to avoid overfitting, model training, prediction evaluation, and result interpretation. The YOLO model was applied across three iterations using a dataset of 1862 images. To enhance training efficiency and detection speed, the graphics processing unit (GPU) acceleration was utilized, further enhancing the experimental process. The results of this study revealed that the YOLOv8x variant produced the most promising results. This proposed model attained a remarkable F1 score of 0.95, bolstered by a confidence score of 0.631, with the potential for an increase to 0.80 in confidence without significantly compromising the F1-score. These findings are poised to make a substantial contribution to the broader research landscape, particularly in advancing the effectiveness of detection models for traffic officers.

In the face of 21st-century environmental challenges, including climate change, migration pressures, and waste disposal issues, certain healthcare sectors, notably dentistry, pose a significant global environmental footprint with concerns about carbon emissions and waste production. This scoping review delves into the paradox that healthcare, while dedicated to safeguarding health, inadvertently contributes to environmental degradation through waste accumulation and disposal. The analysis of relevant pertinent literature emphasizes the imperative for an environmentally sustainable approach to dental waste measurement, disposal methods, and comprehensive education for stakeholders. Aligned with the World Conference on Sustainable Development and the United Nations' 2030 Agenda, the study adhered to PRISMA-ScR scoping review guidelines and Institute of Medicine's recommendations. The study utilized Medline/PubMed and international organization websites for data retrieval, employing Boolean operator queries in Medline. A systematic literature analysis identified six cross-sectional studies (2004-2018) highlighting variations in dental waste composition due to the lack of standardized identification methods. This heterogeneity underscores the need for a proposed research model, emphasizing comprehensive methodologies and healthcare staff training in waste management. The study advocates for environmentally conscious dental practices, contributing to broader sustainable healthcare goals through sharing of a research protocol for dental solid waste management.

The signs and symptoms of Long COVID can be explained by a shortage of blood in the body and a resulting deficient blood flow through nearly all organs. This shortage arose during the acute phase of COVID19 by an increased breakdown of haematocytes, to which the liver responds by reducing the production of plasma. In order to prevent a too large decrease in haematocrit. In order to ensure the perfusion of organs that are directly necessary for survival, the body takes the emergency measure of diverting blood from other organs and tissues. The perfusion of the blood-producing organs is also affected by this distribution measure, which hinders the smooth recovery of the total blood volume. The body is stuck in this vicious circle: a shortage of circulating blood hinders the recovery of blood production. This explains the long duration of Long COVID. My proposed treatment of Long COVID focuses on the recovery of the correct volume of blood in the body of the right composition by the intravenous administration of donor blood products, starting with albumin concentrate. A trial treatment can be performed in any hospital without much additional preparations, and has a lower associated risk for the patient than analysing the total blood. A diagnosis ex juvantibus, by therapeutic response, is therefore preferable. I suspect that we will find a haematocrit value at the high extreme of the reference range, and an albumin value at the low extreme of the reference range in most Long COVID patients before the start of the treatment, because the liver can not keep up with the recovery of the red bone marrow.

The demands for high power and low emissions put focus on energy efficiency when developing new engines. An important part is the UAV engine cooling system, which cools the engine structure below damaging temperatures. For high temperatures in the cooling system there is a risk that boiling occurs and while the initial nucleate boiling enhances the cooling effect, the subsequent Film boiling decreases the heat transfer drastically. It is important to understand the benefits and limitations of various fluids when designing a two-phase cooling system. This paper proposes an alternative organic coolant. Its normal application range is 15°C to 400°C, and its pressure range is from atmospheric to 10.6 bar. DOWTHERM A fluid possesses unsurpassed thermal stability at temperatures of 400°C. This fluid, in both the liquid and vapor form, is noncorrosive toward common metals and alloys. Even at the high temperatures involved, the equipment usually exhibits excellent service life. Original equipment in many systems is still being used after 30 years of continuous service. The numerical results, described in this paper, show the potential of DOWTHERM A as a good alternative for cooling a UAV engine. It will extend the working temperature range of the Diesel engine and will maintain the structural integrity of the piston, cylinder and the piston rings.

Expert system approach, although quite old, is still quite effective in scientific areas where experts are required to make diagnoses and predictions. One of those areas is fish disease diagnosis. It is an application domain that currently employs complicated processes, which require high level skills for making accurate diagnoses. On the other hand, complete datasets for full diagnosis to be able to use machine learning techniques are not available. Therefore, in aquaculture, now more than ever, fish farmers do not have the required expertise or equipment to accurately diagnose a fish disease. For that reason, expert systems that can help in the diagnosis, prevention and treatment of diseases have been developed. In this paper, we attempt to give an overview of the expert system approaches for fish disease diagnosis developed in the last two decades. Based on the analysis of their technical and non-technical characteristics, we propose an expert system architecture and a fish disease diagnosis process aiming at improving the deficiencies of existing such systems. The proposed system can handle all kinds of fish diseases based on image and non-image data as well as on molecular tests results and can provide explanations. The diagnosis process goes through four consecutive levels, where each next level considers an additional category of parameters and provides diagnoses with higher certainty.

The Sustainable Development Goals (SDGs) is a global strategy that aims to obtain a more equitable and just world. These objectives are organized in 17 SDGs, which are detailed in 169 targets. Different international institutions have emphasized education's relevance to developing citizens who contribute to the SDGs' achievement for 2030. However, a review focused on Physical Education exclusively has not been performed yet. Therefore, the objective of this work is double. First, to analyze and select the specific goals of the SDGs that can be implemented in the subject of Physical Education. And second, to relate these specific goals to the different models based on Physical Education practices. This review showed how three institutional documents have previously related sport, physical exercise and physical education to the specific goals of the SDGs. Based on the search done, this document selects those goals that could be integrated into the educational context through Physical Education. The bibliographic and narrative analysis carried out in this research shows that of the 169 specific goals proposed in the SDGs, only 24 could be worked on in Physical Education. In addition, after this previous analysis, a proposal for the relationship between the practice-based models and these 24 goals is presented. The contributions made in this paper will allow teachers to establish links between PE sessions and SDGs while raising awareness to develop students who contribute to a more sustainable world.

Object detection is important in many applications, such as autonomous driving. While 2D images are lack of depth information and are sensitive to environmental conditions, 3D point cloud can provide accurate depth information and a more descriptive environment. However, sparsity is always a challenge in single-frame point cloud object detection. This paper introduces a two-stage proposal-based feature fusion method for object detection using multiple frames. The proposed method, called proposal features fusion (PFF), utilizes a cosine-similarity approach to associate proposals from multiple frames and employs an attention weighted fusion module to merge features from these proposals. It allows for feature fusion specific to individual objects and offers lower computational complexity while achieving higher precision. The experimental results on the nuScenes dataset demonstrate the effectiveness of our approach, achieving a mAP of 46.7%, which is 1.3% higher than the state-of-the-art 3D object detection method.

Zoom dysmorphia (ZD) is a facial dysmorphia triggered or aggravated by frequent virtual meetings. The frequent use of videoconferencing platforms has been linked to a distorted perception of facial images as individuals have an increased awareness of their appearance, given constant video feedback. As a result, dysmorphic concerns can develop. It is crucial to identify ZD as the condition interferes with the individual’s life and can trigger or aggravate body dysmorphic disorder (BDD). A standardized approach for screening ZD in non-psychiatric settings has yet to be defined. We discuss the features of ZD and the challenges of screening for ZD in a virtual setting. To facilitate the recognition of ZD in telehealth consultations, we propose a comprehensive ZD screening questionnaire that includes questions related to typical ZD features and a BDD-focused question. The questionnaire is concise and allows the identification of individuals with a potential ZD. A BDD assessment in such individuals should follow.

Nowadays, frameworks and models are critical to enabling organizations to identify their current sustainability integration into business and to follow up on these initiatives over time. In this context, the maturity models offer a structured way of analyzing how a supply chain meets specific sustainability requirements and which areas demand attention to reach maturity levels. This study proposes a five-level maturity model to help supply chains identify their level of engagement with sustainability practices combining three perspectives: intra and inter-organizational sustainability practices, triple-bottom-line approach and critical areas for sustainability. All the steps followed in constructing the maturity model were based on a literature review, and case studies supported its improvement, application, and testing. The proposed model presents many advantages, such as being used as a self-assessment tool, a roadmap for sustainability behaviour improvement, and a benchmarking tool to evaluate and compare standards and best practices among organizations and supply chains.

This paper shows the proposal of the use of linked data for smart metering systems. The aim of linked data in smart grid applications such as smart metering systems is to give semantic knowledge of the energy transactions between all participators in the power markets. In combination with other technologies like blockchain, the linked data could improve decentralization and security in the world's energetic future.

Big Data warehouses are a new class of databases that largely use unstructured and volatile data for analytical purpose. Examples of this kind of data sources are those coming from the Web, such as social networks and blogs, or from sensor networks, where huge amounts of data may be available only for short intervals of time. In order to manage massive data sources, a strategy must be adopted to define multidimensional schemas in presence of fast-changing situations or even undefined business requirements. In the paper, we propose a design methodology that adopts agile and automatic approaches, in order to reduce the time necessary to integrate new data sources and to include new business requirements on the fly. The data are immediately available for analyses, since the underlying architecture is based on a virtual data warehouse that does not require the importing phase. Examples of application of the methodology are presented along the paper in order to show the validity of this approach compared to a traditional one.

Wind energy in Europe is aimed to grow at a steady, high pace, but opposition from residents to local wind farm plans is one of the obstacles to further growth. A large body of evidence shows that local populations want to be involved and respected for their concerns, but in practice this is a complex process that cannot be solved with simple measures such as financial compensation. The visual presence and the acoustic impact of a wind farm is an important concern for residents. Generally environmental noise management aims to reduce the exposure of the population, usually based on acoustics and restricted to a limited number of sources (such as transportation or industry) and sound descriptors (such as Lden). Individual perceptions are taken into account only at an aggregate, statistical level (such as percentage of exposed, annoyed or sleep-disturbed persons in the population). Individual perceptions and reactions to sound vary in intensity and over different dimensions (such as pleasure/fear or distraction). Sound level is in fact a weak predictor of the perceived health effects of sound. The positive or negative perception of and attitude to the source of the sound is a better predictor of its effects. This article aims to show how the two perspectives (based on acoustics and on perception) can lead to a combined approach in the management of a wind farm aimed to reduce annoyance, not primarily of sound level. An important aspect in this approach is what the sound means to people: is it associated with the experience of having no say in plans, does it lead to anxiety or worry, is it appropriate? The available knowledge will be applied to wind farm management: planning as well as operation.

The deterioration and destruction of the environment is becoming more and more considerable and greater efforts are needed to stop it. To accomplish this feat, all members of society must identify with environmental problems, with collective environmental action being one of the most relevant means of doing so. From this perspective, the analysis of the psychosocial factors that lead to participation in environmental collective action emerges as a priority objective in the research agenda. Thus, the aim of this study is to examine the role of "environmental identity" as conceptualized by Clayton, as a central axis for explaining environmental collective action. The inclusion of the latter in the theoretical framework of the SIMCA model gives rise to the model that we have called EIMECA. Two studies were conducted, and the results reveal that environmental identity, a variety of negative affects, as well as group efficacy accompanied by hope for a simultaneous additive effect, are critical when it comes to predicting environmental collective action.

The COVID-19 outbreaks have caused universities all across the globe to close their campuses and forced them to initiate online teaching. This article reviews the pedagogical foundations for developing effective distance education practices, starting from the assumption that promoting autonomous thinking is an essential element to guarantee full citizenship in a democracy and for moral decision making in situations of rapid change, which has become a pressing need in the context of a pandemic. In addition, the main obstacles related to this new context are identified, and solutions are proposed according to the existing bibliography in learning sciences.

Digital music is one of the most important things in market due to the music royalties’ distribution in Korea. As the music market is transformed to the digital music market such as download the music and streaming, the distribution of music royalties starting from online service provider (OSP) has come to be a highly important part for music rights holders. One of the most important issues in current music royalties’ distribution in Korea is the unfair way of music royalties due to indiscriminative repeat streaming of digital music. To prevent this, music log usage data from several OSPs was collected in day-based system, however, there was a limit to identify detailed information on the use of music in current state. This paper analyzed the structural problems and limitations of settlement of music royalties, and provides a structure in which there can be transparent settlement and distribution between users and rights holders as one of the institutional measures. We’ll also propose various AI-based applications using music log usage data. The proposed system will hopefully be used for public purposes.

A promoting work for the elderly is an important way of empowering the participation of the elderly in society for economic development, which will lead to the well-being of the elderly. This is presented the policy proposal for elderly government officials employment in public sector organizations landscape study by policy research on EDFR which combines MACR, especially, elderly civil servants in public sector organizations of 56 - 60 years, and aged of 60 years to over, include the experts into the data. Comparing the employment forms elderly civil servants in public sector organizations of flexible employment and new employment models to differences at statistical significance level of 0.01, 0.05, respectively. Significance the policy proposal for elderly government officials employment at “Key” factors of the strategies, goals, measures, and operational guidelines to effectiveness.

As a first step a unification of the gravitational with the electromagnetic interaction within a classical framework is proposed. It is based on a V₅-geometry, with x₅ = q/m. The sole source term is mechanical stress energy, positioned along x₅. The trajectories of test-bodies are placed in V₄ (x₅ = const)-slices. The resulting field equation couples a geometric G-tensor to mechanical stress energy, its momentum with respect to V₅ and the change of this momentum with proper time τ. The following step proceeds to the quantization of space-time to enable the formalization of elementary particles und strong interaction. This is complimented by the inclusion of spin and the weak force, leading finally to a grand total equation, the stationary version of which corresponds to Schroedinger´s equation, the instationary version to the Einstein equation of General Relativity.

Rapidly providing a definitive diagnostic test that can be used broadly by healthcare providers and members of the public in the setting of a disease emergency is critical to limit pathogen spread, develop and deploy medical countermeasures, and mitigate the social and economic harms of a serious epidemic or pandemic. There is extraordinary expertise within and outside of government working on these issues, and major accomplishments have been made to accelerate test development, expand laboratory testing capacity, and establish widespread point-of-care testing. Still, the United States does not have a plan to rapidly respond, to develop, manufacture, or deploy at national scale diagnostic testing in the earliest days of a new infectious disease crisis. Nor does the nation have a plan to sustain testing capacity at high volume over the course ofan enduring epidemic or pandemic. To address this gap, we are proposing a National Diagnostics Action Plan that describes the steps that are urgently needed to prepare for future infectious disease emergencies, as well as the actions we must take at the first signs of such events. These recommendations require substantial collaboration between the US government (USG) and the private sector to solve a series of challenges now, as well as to prepare for the massive and rapid scale-up of laboratory and point-of-care test development and testing capacity in future emergencies. The recommendations include establishing pre-event contracts; ensuring rapid access to clinical samples; creating a permanent public-private testing coordinating body to allow for rapid information sharing and improved cooperation among the USG, test developers, and clinical laboratories; and accelerating testing rollout at the beginning of an event—andthus, the effective public health management of a disease crisis. These recommendations were informed by extensive discussion with people who managed the COVID-19 and monkeypox responses, review of past reports written on diagnostic challenges, and the experiences of the authors.

One application of the Cosmological Gravitational Lensing in General Relativity is the measurement of the Hubble constant H_0 using the time delay Delta t between multiple images of lensed quasars. This method has already been applied, obtaining a value of H_0 compatible with that obtained from the SNe 1A, but non compatible with that obtained studying the anisotropies of the CMB. This difference could be a statistical fluctuation or an indication of new physics beyond the Standard Model of Cosmology, so it desirable to improve the precision of the measurements. At the current technological capabilities it is possible to obtain H_0 to a percent level uncertainty, so a more accurate theoretical model could be necessary in order to increase the precision about the determination of H_0. The actual formula which relates Delta t with H_0 is approximated; in this paper we expose a proposal to go beyond the previous analysis and, within the context of a new model, we obtain a more precise formula than that present in the Literature.

Diverse development models, including waterfall development, iterative development, and agile development, have been put forth and implemented across real-world contexts. When engaging in discussions on project management, the examination and exploration of development models assume paramount importance and are integral. This paper embarks upon an investigation and scrutiny of these development models, culminating in the proposition of "Quasi" Development Models: Quasi-Waterfall and Quasi-Agile.

Abstract: Panfacial fractures are complex injuries involving multiple regions of the facial skele-ton simultaneously, which may necessitate multiple surgeries over a relatively short period. They are often associated with polytrauma and other injuries including brain trauma, which re-quire either immediate airway management, prolonged intubation, or repeated intubations for staged surgeries. Given the frequent need for intermaxillary fixation and the potential involve-ment of the central nasal complex or skull base, conventional oro-tracheal or nasotracheal intu-bation often presents challenges. Submental intubation is the most reported method of airway management with the aim to avoid tracheostomy and its related complications. A review of the different techniques of airway management in the elective treatment of panfacial fractures was performed focusing on the advantages and disadvantages of each method. Most of the literature consisted of retrospective studies, with only one prospective study comparing submental intu-bation to tracheostomy in panfacial fractures. There is abundant literature that favours the sub-mental intubation for its rapid establishment and low complication rate. Other techniques less reported were retromolar intubation, nasotracheal to orotracheal switch, tracheostomy or crico-thyroidotomy. An algorithm for the management of the airway in panfacial fractures is pre-sented.

In the realm of the Internet of Things (IoT), a network of sensors and actuators collaborates to fulfill specific tasks. As the demand for IoT networks continues to rise, it becomes crucial to ensure the stability of this technology and adapt it for further expansion. Through an analysis of related works including Feedback-based Optimized Fuzzy Scheduling Approach (FOFSA) algorithm, Adaptive Task Allocation Technique (ATAT) and Osmosis Load Balancing algorithm (OLB), we identify their limitations in achieving optimal energy efficiency and fast decision-making. To address these limitations, this research introduces a novel approach to enhance the processing time and energy efficiency of IoT networks. The proposed approach achieves this by efficiently allocating IoT data resources in the Mist layer during the early stages. We apply the approach to our proposed system known as the Mist-based Fuzzy Healthcare System (MFHS) that demonstrates promising potential to overcome the existing challenges and pave the way for efficient Industrial Internet of Healthcare Things (IIoHT) of the future.

Leonardo da Vinci (1452-1519) is considered one of the greatest geniuses of the Renaissance. His studies developed advanced ideas for his time, even in its most unknown aspects, such as: architecture, urban planning and restoration. He never studied formally, but he learned everything due to his method of observation, the study of other treatises and especially the group of artists with whom he collaborated. After the study of its codices a great interest and knowledge is detected, related to the design, the structural calculation, the materials and the constructive systems, in such a way that their proposals influenced the architecture of the Renaissance, through the work of other authors of your time. The purpose of this article is to make a critical analysis of its excellent architectural proposal in the cupola of the Duomo of Milan and the reasons why it was not carried out under its name. This proposal is included within a discipline in which it has never been recognized as such, but which demonstrated the same qualities as in other fields where it is recognized prestigiously.

The interaction of matter when separated by a distance is a fundamental question, whether such interactions occur through instantaneous action at a distance or retarded interaction (principle of locality)? While the mainstream consensus favors the principle of locality, instantaneous action at a distance offers certain advantages. Previously, instantaneous action at a distance has been viewed as an appearance or representation from specific gauge choices of electromagnetic potentials (retarded). In this paper, we propose a novel approach that combines Weber’s electrodynamics with the concept of vacuum polarization to explore a new possible connection between the two viewpoints: instantaneous action at a distance and the locality principle. This new approach aligns with the observation of locality in signal/energy propagation while retaining the notion of instantaneous action at a distance.

The high consumption of firewood in Honduras requires the search for alternatives that reduce its negative effects on health, economy, and the environment. One of these alternatives has been the promotion of improved cooking stoves, which achieve a large reduction in firewood consumption. This paper shows a cost-benefit analysis for an improved cooking stove adoption strategy for Honduras. The methodology uses the Long-range Energy Alternatives Planning System, LEAP, a tool globally used in the analysis and formulation of energy policies and strategies. The energy model considers the demand for firewood as well as the gradual introduction of improved cooking stoves, according to premises of a National Strategy. Hence, it is demonstrated that the costs of implementing this adoption strategy are lower than the costs of not implementing it, taking into consideration various scenarios up to and including the year 2030.

Objectives: Chylothorax is a relatively rare condition of lymphatic fluid accumulation in the thoracic cavity due to a leakage from the thoracic duct or its tributaries. Patients present with dyspnea, malnutrition, and immunosuppression. Treatment can be conservative or surgical, depending on etiology and clinical course. The optimal management algorithm for chylothorax is still controversial. Methods: This is a retrospective study of all patients with chylothorax treated at our Department of Thoracic Surgery during the 10-year period. Results: A total of 14 patients were identified for the study. Nine patients had chylothorax after lung or esophageal cancer surgery. Four patients had chylothorax in advanced lymphoma. One patient had chylothorax after blunt chest trauma. A conservative approach was initiated in most patients (92%), including pleural drainage, nil per mouth, total parenteral nutrition, and somatostatin 0.1 mg bid subcutaneously. Surgical treatment was indicated in patients with thoracic drain production >800 mL per day beyond the fifth day of treatment and those with blunt thoracic trauma. Two patients had thoracic duct ligation via right-sided thoracotomy, and five patients had video-assisted thoracoscopic thoracic duct ligation with the immediate arrest of chylous leakage. Conclusion: Chylothorax should be treated conservatively initially. Surgical treatment should not be delayed in case of failure beyond the fifth day. In our series of patients, a video-assisted thoracoscopic approach for thoracic duct ligation proved to be minimally invasive, highly efficient, and well tolerated by patients and, therefore, should be the preferable route of surgical treatment.

1960s Europe saw a large number of residential neighborhoods built to house those migrating from the countryside. Today, more than 50 years later, these neighborhoods suffer high levels of functional, social, and technical obsolescence. In response to this, University of Seville developed the Aura Strategy as an intervention methodology to find global solutions to issues in outdated neighborhoods. To provide visibility to this aspect of the Aura strategy, the retrofit proposal presented in this article provides a solution to improve the roofing of buildings in a case study neighborhood (Polígono de San Pablo, Seville) and an analysis of the results in terms of energy and financial savings for local residents. The results show that for a population of roughly 18,000 (in 2018), net savings, including energy and retrofitting costs, ranging from nearly 6.5 to over 8.6 million can be made over the 20-year life cycle span. Likewise, the results obtained on the reduction of thermal loads indicate a 72% decrease in energy consumption, equivalent to a saving of close to 4,500 tons of greenhouse gas emissions for the district and the entire life cycle time period, with the consequent benefits on the impact on air quality and and the fight against climate change. climate change.

CagY is the largest and most complex protein from Helicobacter pylori's type IV secretion system (T4SS) and may participate in the modulation of gastric tissue inflammation. A three-dimensional structure has been reported for only two segments of the protein. To build a more complete model, particularly the region that spans between the outer membrane (OM) and the inner membrane (IM), we employed different approaches, including homology modeling, ab initio, and deep learning techniques. For the long-middle repeat region (MRR), modeling was performed using deep learning techniques and Molecular Dynamics. The modeled segments were assembled into a chain of 1595 aa, and a 14-chain CagY multimer structure was composed by structural alignment. The final multimer structure correlated with previously published struc-tures and allows to show how the multimer may form the T4SS channel through which CagA and other molecules are translocated to gastric epithelial cells. The model further confirmed that MRR, the most polymorphic and complex region of CagY, presents numerous cysteine residues forming disulfide bonds that stabilize the protein and suggest this domain probably functions as a contractile region that may play an essential role in the modulatory activity of CagY on tissue inflammation.

The refractive index of a liquid serves as a fundamental parameter reflecting its composition, thereby enabling the determination of component concentrations in various fields such as chemical research, food industry, and environmental monitoring. Traditional methods for refractive index (RI) measurement rely on light deflection angles at interfaces between the liquid and a material of known refractive index. In this paper, the authors present a new differential refractometer for highly sensitive measurement of RI differences between two liquid samples. Using a configuration with two cells equipped with flat parallel plates as measuring elements, the instrument facilitates accurate analysis. Namely, the sensor signals from both the solution and the solvent cuvette are generated simultaneously with one laser pulse, reducing the possible fluctuations of the laser radiation intensity. Our evaluation shows the high sensitivity of RI measurements (< 7 · 106), so this differential refractometer can be proposed not only as a high-sensitivity sensing tool that can be used for mobile detection of nanoparticles in solution samples, but also to determine the level of environmental nano-pollution using water (including rain, snow) samples from various natural as well as industrial sources, thus helping to solve some important environmental problems.

Education on Innovation and Entrepreneurship (I&E) has increased in the last two decades, specially, through MOOCs. Lately, these reusable online alternatives have tended to be revalorized by HEIs into blended learning activities, posing new challenges for instructors, specially, on how to bridge prior knowledge with in-class activities. Adopting a discursive approach to knowledge, our proposal aims to meet this challenge by identifying student’s ‘representations’, i.e., patterned constructions on disciplinary knowledge. Representations can be found across different cohorts and thus further complemented by instructors. To test this assumption and build our proposal, we analysed student’s representations in two observations. We mapped students’ representations over key I&E definitions (e.g., ‘start-up’) and, to know how prior knowledge may be complemented by instructors, we identified students’ alignment with expert disciplinary knowledge. Firstly, we found that the two cohorts tended to express representations by turning attention to several dimensions, e.g., referring to different types of features or finalities associated with concepts. Secondly, the disciplinary alignment description revealed that students tended to focus on the same components present in experts’ definitions, but with a greater level of generality. Our results have been packaged into a proposal that aims to help instructors scale their blended activities.

The development of sustainability, the improvement of the quality of life, and the protection of future generations have become of prime importance in light of climate changes and carbon emissions. Universities are at the top of institutions that should participate in creating an environmentally friendly infrastructure. This study thus aimed to explore the extent to which Saudi universities achieve sustainability in the light of the Saudi Green Initiative from the faculty members’ perspective. Surely, this investigation would produce a proposal to promote sustainability in Saudi universities. A questionnaire consisting of five dimensions, namely academic sustainability, community partnership, resource management, planning and administration, and innovation and leadership was developed and administered to 120 faculty members from five Saudi universities. The participants’ ratings of Saudi universities’ achievement of sustainability dimensions ranged from high to moderate. Based on the results, a proposal was offered to take sustainability in Saudi universities to a higher level.

In this paper a new double-nozzle technique for in-gas-jet laser resonance ionization spectroscopy is proposed. The functionality of this new technique we explored by detailed gas dynamic and Monte Carlo atom-trajectory simulations, which results are presented and discussed. The results of similar computer simulations for JetRIS setup (as a typical representative of the conventional nowadays in-gas-jet technique) are presented and discussed as well. The direct comparison of calculation results for proposed new technique with the conventional one shows that the double-nozzle technique has many advantages compared with that one used in the JetRIS setup at GSI for future high-resolution laser spectroscopic study of heaviest elements. To fully implement the proposed new technique to all existing (or under construction) setups for in-gas-jet laser resonance ionization spectroscopy, it will be enough just replace the used their supersonic nozzle by the miniature double-nozzle device described in the paper.

The underlying physical concept of computing out-of-time-ordered correlation (OTOC) is a significant new tool within the framework of quantum field theory, which now-a-days is treated as a measure of random fluctuations. In this paper, by following the canonical quantization technique we demonstrate a computational method to quantify the two different types of Cosmological auto-correlated OTO functions during the epoch when the non-equilibrium features dominates in Primordial Cosmology. In this formulation, two distinct dynamical time scales are involved to define the quantum mechanical operators arising from cosmological perturbation scenario. We have provided detailed explanation regarding the necessity of this new formalism to quantify any random events generated from quantum fluctuations in Primordial Cosmology. We have performed an elaborative computation for the two types of two-point and four-point auto-correlated OTO functions in terms of the cosmological perturbation field variables and its canonically conjugate momenta to quantify random auto-correlations in the non-equilibrium regime. For both the cases we found significantly distinguishable non-chaotic, but random behaviour in the OTO auto-correlations, which was not pointed before in this type of studies. Finally, we have also demonstrated the classical limiting behaviour of the mentioned two types of auto-correlated OTOC functions from the thermally weighted phase space averaged Poisson Brackets, which we found exactly matches with the large time limiting behaviour of the auto-correlations in the super-horizon regime of the cosmological scalar mode fluctuation.

This article offers an overview of congenital and acquired vascular anomalies involving the portal venous system in dogs and cats, as determined by multidetector-row computed tomography angiography. Congenital absence of the portal vein, portal vein hypoplasia, portal vein thrombosis and portal collaterals are described. Portal collaterals are further discussed as high- and low-flow connections, and categorized in hepatic arterioportal malformation, arteriovenous fistula, end-to-side and side-to-side congenital portosystemic shunts, acquired portosystemic shunts, cavoportal and porto-portal collaterals. Knowledge of different portal system anomalies helps understand the underlying physiopathological mechanism and is essential for surgical and interventional approaches.

Here we propose a simple way in which one can considerably improve performance of the gas stripper setup at the GSI UNILAC. To do so, it will be enough to replace inside the main GSI stripper chamber the present nozzle and the short windowless storage gas cell (for pulsed gas-jet operation mode) by a simple conical diverging nozzle combined with a gas catcher tube placed on the axis of gas-jet at some distance downstream the nozzle exit. As a result, the background pressure in the main and differentially pumped adjacent vacuum chambers of the gas stripper at the GSI UNILAC will dramatically reduce, and it will make possible to achieve the required optimal thickness of gas targets. The pulsed gas stripper operation is simply realized by implementing a commercially available fast gas valve connected to the nozzle entrance. Moreover, the ion beam pulses repetition rate can be increased and it will allow for the considerably higher average intensity of the ion beams extracted from the GSI UNILAC. Performance of the proposed GSI UNILAC gas stripper modification we explored by means of detailed computer experiments, which give a realistic description of supersonic gas jets flowing out the nozzle into vacuum. Results of these computer experiments have presented and discussed.

This paper presents a microgrid distributed energy resources (DERs) for a rural standalone system. It is made up of solar photovoltaic (solar PV) system, battery energy storage system (BESS), and wind turbine coupled to permanent magnet synchronous generator (WT-PMSG). The DERs are controlled by maximum power point tracking (MPPT) based proportional intergral (PI) controllers for both maximum power tracking and error feedback compensation. The MPPT uses the perturb and observe (P&O) algorithm for tracking the maximum power point of the DERs. The PI gains are tuned using the Ziegler-Nichol’s method. The developed system was built and simulated in MATLAB/Simulink under two conditions - constant load, and step load changes. The controllers enabled the BESS to charge even during conditions of varying load and other environmental factors such as change of irradiance and wind speed. The reference was tracked very well by the output voltage of the DC grid. This is a useful research for electrifying the rural islanded areas, too far from the grid.

As the novel COVID-19 disease spreads around the world, the most affected population are those who suffer from the most common chronic diseases, such as obesity, hypertension, and type 2 diabetes, which are quite associated with the so-called age-related diseases. On the other hand, since the Spanish influenza outbreak, humanity has not experienced an infectious disease that synergizes so quickly with chronic diseases, making it mortal for those individuals with comorbidities. In this context, COVID-19 is challenging for health systems all around the world due to the high prevalence of chronic diseases. Nowadays, we are facing the beginning of a new era in which health infectious and chronic diseases meet. Therefore, epidemiologic and biomedical researchers must work together to solve further contingencies, and politicians should direct science-centered decisions on public health. In the present paper, we make an urgent call to learn from the COVID-19 lessons in order to mitigate the chronic diseases prevalence and to address the influence of the infectious diseases on the aging process; since we are about to begin the Decade of Healthy Aging.

Integrating systems acquired from third parties and legacies has become of great necessity in companies. This is mainly due to the need to exchange information between entities, such as banks, suppliers, customers, allies, etc. Therefore, it is essential to guarantee the integrity of the data and keep the integration up to date with the changes that can occur. Furthermore, reducing the transaction risk and avoiding losing information is necessary. Implementing this complex task involving technological and business challenges requires appropriate architecture implementation. This article presents an architecture named Dynamic Canonical Data Model through agnostic messages. The contribution involves treating the low link in integrating software units, also called the integration of loosely coupled software units. In particular, it focuses on internal data and external data integration. The proposal reduces their integration, maintenance time, and cost, maximizing their scalability and promoting reuse. To illustrate their components, a case study undertaken at the Mexican Logistics Company Paquetexpress is presented. The company has evaluated different enterprise application integration systems over 26 years to achieve a standardized integration. The article describes an architecture designed and implemented for this delivery company in a real-world case. The implementation’s source code was registered in the National Registry of Copyrights of Mexico.

For most professionals to be successful in the current job market, they need some entrepreneurial skills (ES). This study aimed to describe and systematize these skills, considering the current globalization and digital transformation phenomena. The documental analysis and the critical reflection on the collected data allowed us to identify the socio-economic and socio-cultural reasons for the relevance of this problem. Consequently, to elaborate a frame of reference that is intended to be adequate to the needs of the professionals of the current global and digital era. The results pointed to a tripartite ES model - to be open to novelty, to create solutions to emerging problems, and to communicate effectively - which integrates the following skills: creativity and innovation, the spirit of initiative, self-efficacy and resilience, strategic planning, and evaluation, resolution of problems and decision-making, transformational leadership, clear and visual communication, teamwork and networking, and digital communication. In the continuation of this study, an ES scale will be created and validated according to this model, which will make it possible to measure the degree of development of these competencies.

Humankind has yearned for hundreds of thousands of years to explore and truly understand the dynamics of our enigmatic universe. However, we have often been limited by our hindsight here on Earth, or the limitations of human travel to further destinations. Having the ability to send humans to deep space would arguably set us millions of years ahead in our scientific understanding of various physical processes, including insight on some of the key mysteries that we still face. Perhaps a settlement further away from the Sun, Earth, and limiting optical resolution could provide us with greater ability to collect more meaningful data through our telescopes or other instruments. Moreover, one of the most significant abilities of such a settlement could be slightly easier access to sites of research within our own solar system that could be essential in the forthcoming years, such as Jupiter, Titan, the Kuiper Belt, and some Oort Cloud objects. Here we describe a unique option and set of goals to pursue and achieve just that via a mission to an L5 Trojan asteroid of Neptune, 2011 HM102. In this paper, we propose a number of possible challenges presented by traveling to the base, modeling its layout, maintaining the presence of life, and opportunities for research on the asteroid as well as possible solutions to these challenges. We begin our journey by outlining some motivations for creating a settlement on the asteroid, then outline a few key technological goals that must be achieved before we are capable of efficiently sending a colony of people to the settlement. We describe materials necessary for its construction as well as a novel mechanism for artificial gravity utilizing the Roche limit of the asteroid and multiple applications of quark-gluon plasma. From there we explore more aspects of settlement design, including key considerations for the layout of our settlement, sources of power, and protection from high-energy radiation from sources such as galactic cosmic rays. Then, we embark on a detailed discussion on the measures needed to maintain life on the settlement, such as hydroponic crop growth, a cycle for water recovery and oxygen generation, temperature maintenance, and air purification. Some remarks on the sustainability of life on the settlement follow, as well as some recommendations for entertainment, social life, economics, and governmental systems on the settlement.

Objectives: Few studies in literature evaluate the "mean measure" of root divergence. Most of them are linear measurements, they hardly describe the dental furcation conformation. It is left to the subjectivity of the operator deciding whether a furcation is convergent or divergent. The goal of this study is to create a visual evaluation method to overcome these problems giving a conformation of the entire interradicular space. Material and methods: A user-friendly software (Paint®, Windows10®) was used to measure endo-oral radiographs of upper and lower molars. Three kinds of measurements were taken. Three operators used the software to measure 20 radiographs, then the technique was repeated on 250 radiographic images to identify an average measurement. The ratio of these three measurements allowed to develop a new visual evaluation method of the interradicular space. Results: Intra and inter-operator reproducibility was statistically assessed on a sample of 20 anonymous endo-oral radiographs measured by 3 blind operators. Then, a sample of 250 anonymous endo-oral radiographs were measured by a blind operator and were statistically evaluated to identify an average value to define a main conformation of the interradicular space. Measurements made by the 3 operators on the 20 radiographic images showed that the technique is reproducible, and a mean value of the interradicular space was obtained. Conclusions: A new anatomical evaluation of the interradicular space in its entirety, which could help the clinicians in the therapy of furcated molars, can be obtained.

Most Neotropical Psittacidae have a diploid number of 2n=70, and a dichotomy in chromosome patterns. Long-tailed species have biarmed macrochromosomes, while short - tailed ones have telo/acrocentric macrochromosomes. However, the use of chromosome painting with chicken and white hawk probes has demonstrated that karyotype evolution in Psittacidae includes a high number of inter/intrachromosomal rearrangements. Hence, to determine the phylogeny of Long and Short-Tailed species, and to propose a putative ancestral karyotype for this group, we constructed homology maps of Pyrrhura frontalis (PFR) and Amazona aestiva (AAE) and compared them to other previously analyzed long-tailed species. Chromosomes were analyzed by conventional staining and fluorescent in situ hybridization (FISH) using whole chromosome paints of G. gallus (GGA) and L. albicollis (LAL). Conventional staining showed a karyotype with 2n=70 in both species, with biarmed macrochromosomes in Pyrrhura frontalis and telo/acrocentric chromosomes in Amazona aestiva. Comparison of the results with the putative avian ancestral karyotype (PAK) showed fusions in P. frontalis of PAK1p/PAK4q (PFR1) and PAK6/PAK7 (PFR6) with a paracentric inversion in PFR6. However, in A. aestiva there was only the fusion between PAK6/7 (AAE7) with a paracentric inversion. Hybridizations with LAL probes confirmed these results. The results indicate that PFR retained a more basal karyotype than Anodorhynchus hyacinthinus (AHY), Ara macao (AMA) and Ara chloropterus (ACH), because these three species show the fusion PAK8/PAK9 that is not seen in PFR. Hence, we suggest that the ancestral karyotype of species with biarmed chromosomes have the fusions PAK1p/PAK4 and PAK6/PAK7 and, additionally, a pericentric inversion of PAK6/PAK7, while the fusion PAK8/PAK9 would have appeared in the common ancestor of Anodorhynchus hyacinthinus, Ara macao and Ara chloropterus. However, the species A. aestiva shows a characteristic plesiomorphic trait, since PAK1p/PAK4q and PAK8/9 fusions are absent. Our results base on chromosome rearrangements suggest the classification following the criterium of tail length may no reflect the real phylogenetic history of Neotropical Psittacidae.

Proteases represent common targets in combating infectious diseases including COVID-19. The 3-chymotrypsin-like protease (3CLpro) is a validated molecular target for COVID-19 and it is key for developing potent and selective inhibitors for inhibiting viral replication of SARS-CoV-2. In this review, we discuss structural relationships and diverse subsites of 3CLpro, shedding light on the pivotal role of dimerization and active site architecture in substrate recognition and catalysis. Our analysis of bioinformatics and other published studies unveil a proposal of a novel catalytic mechanism for the SARS-CoV-2 polyprotein cleavage by 3CLpro, centering on the triad mechanism involving His41-Cys145-Asp187 and its indispensable role in viral replication. Recognizing Asp187 as a crucial component in the catalytic process underscores its significance as a fundamental pharmacophoric element in drug design. Next, we provide an overview of both covalent and non-covalent inhibitors, elucidating advancements in drug development observed in preclinical and clinical trials. By highlighting various chemical classes and their pharmacokinetic profiles, our review aims to guide future research directions toward the development of highly selective inhibitors, underscore the significance of 3CLpro as a validated therapeutic target, and propel the progression of drug candidates through preclinical and clinical phases.

Despite being well established phenomena, solidification principles are experiencing tough challenges in their application to explain microscale transport phenomena in additive manufacturing melt pool. The problem becomes even more complicated when applied to multicomponent bulk metallic glass matrix composites (BMGMC) whose behavior is dubious and still not fully understood. The aim of the present study is to highlight pathways to overcome these challenges. A comprehensive nucleation and growth model based on original KGT theory and Rappaz modification is proposed encompassing actual transient thermophysical BMGMC data to predict evolving microstructure during additive manufacturing. The model is aimed at pictorial representation of in-situ ductile phase dendrite evolution from melt pool during solidification using two-dimensional cellular automaton (CA) methods. It is proposed to be coded in MATLAB® using commercial simulation code ABAQUS® at back end for macroscopic heat transfer model. The results will be compared with experimental values for validation.

Arbuscular mycorrhizal fungi are soil microorganisms that provide various benefits, such as increasing soil fertility and enhancing plant growth. The present study aimed to propagate arbuscular mycorrhizal fungal spores in trap plants. Soil sampling was carried out in October 2021 on five coffee farms in the central area of Veracruz, Mexico. Soil from coffee plantations and sterile sand were mixed in pots and used for the propagation of arbuscular mycorrhizal fungi, and Sorghum vulgare was used as a trap plant. The plants were kept in a greenhouse for 120 days. The abundance of spores in the sorghum trap plants increased significantly (p

A method of geoengineering/solar radiation management is proposed as global warming countermeasure. The idea is to decrease surface temperature by increasing stratospheric ozone. One-dimensional (vertical) radiative-convective equilibrium temperature calculations show that surface temperature can be lowered by increasing the amount of ozone in the stratosphere. It was the increase in altitude above about 25 km that reduced surface temperatures. The method of increasing the amount of ozone (O3 injection), the rate of decrease of surface temperature after the ozone increase, and the rate of decrease of ozone concentration by photochemical reaction and diffusion/transport after the ozone increase are discussed.

Albert Einstein, shortly after publishing his General Relativity Theory (GRT) applied it to the entire universe in a paper of 1917. Einstein assumed that such a universe was static in time and possessed a uniform distribution of matter on the largest scales, obtaining a static and finite universe of spherical spatial curvature of radius R. Although this model was refuted by Edwin Hubble's discovery of the expansion of the universe, it is still often studied as a theoretical framework for some problems, such as the twin paradox. This paper will show that Einstein's static universe model leads to a privileged frame of reference, so that any observer moving at the speed v will be able to measure speeds of light other than c depending on the direction of beam transmission. The above will refute the validity of the application to this closed and static universe of the Special Relativity Theory (SRT) proposed by Einstein in 1905 in his article . In addition, a new synchronization convention and new coordinate transformations will be deduced, the "generic" transformations, which will replace those of Lorentz. Finally, the twin paradox in this universe will be solved by making use of them.

This paper investigates whether the Severe Acute Respiratory Syndrome CoronaVirus 2 (SARS-CoV-2) pandemic – also known as COronaVIrus Disease 19 (COVID-19) – could have been favored by specific weather conditions. It was found that the 2020 winter weather in the region of Wuhan (Hubei, Central China) – where the virus first broke out in December and spread widely from January to February 2020 – was strikingly similar to that of the Northern Italian provinces of Milan, Brescia and Bergamo, where the pandemic has been very severe from February to March. The similarity suggests that this pandemic worsens under weather temperatures between 4°C and 11°C. Based on this result, specific isotherm world maps were generated to locate, month by month, the world regions that share similar temperature ranges. From January to March, this isotherm zone extended mostly from Central China toward Iran, Turkey, West-Mediterranean Europe (Italy, Spain and France) up to the United State of America, coinciding with the geographic regions most affected by the pandemic from January to March. It is predicted that next spring, as the weather gets warm, the pandemic will likely worsen in northern regions (United Kingdom, Germany, East Europe, Russia and North America) while the situation will likely improve in the southern regions (Italy and Spain). However, in autumn, the pandemic could come back and affect the same regions again. The Tropical Zone and the entire Southern Hemisphere, but in restricted southern regions, could avoid a strong pandemic because of the sufficiently warm weather during the entire year. Google-Earth-Pro interactive-maps are provided as supplements.

This study aimed to establish and verify the validity of an acoustic simulation method during sustained phonation of the Japanese vowels /i/ and /u/. The study participants were six healthy adults. First, vocal tract models were constructed based on computed tomography (CT) data, such as the range from the frontal sinus to the glottis, during sustained phonation of /i/ and /u/. Next, cylindrical shapes virtually extended by 12 cm were added to the vocal tract models to imitate the trachea between the tracheal bifurcation and lower part of the glottis. The Kirchhoff–Helmholtz integral equation was formulated as the wave equation for sound propagation, and the boundary element method was used for discretization. As a result, the relative discrimination thresholds of the vowel formant frequencies for /i/ and /u/ against actual voice were 1.1%–10.2% and 0.4%–9.3% for the first formant and 3.9%–7.5% and 5.0%–12.5% for second formant, respectively. In the vocal tract model with nasal coupling, a pole–zero pair was observed at around 500 Hz, and for both /i/ and /u/, a pole–zero pair was observed at around 1000 Hz regardless of the presence or absence of nasal coupling. These findings demonstrated that /i/ and /u/ could be simulated with high validity in a vocal tract model constructed from CT data obtained during sustained phonation using the boundary element method.

Published transcriptomic data from surgically removed metastatic clear cell renal cell carcinoma (ccRCC) samples were re-analyzed from the Genomic Fabric Perspective that considers the transcriptome a multi-dimensional mathematical object, constrained by a dynamic set of expression correlations among genes. Every gene in the chest wall metastasis (MET), two primary tumors (PTA, PTB) and the surrounding normal tissue (NOR) of the right kidney was characterized by three independent measures: average expression level (AVE), relative expression variation (REV) and expression correlation (COR) with each other gene. AVE was used to determine the regulation of the genomic fabrics of ccRCC, apoptosis, chemokine and VEGF signaling pathways. REV quantified the alteration of the transcripts’ abundances control, while COR determined the remodeling of the transcriptomic networks of chemokine signaling and oxidative phosphorylation genes. The gene hierarchy was established in based on Gene Commanding Height and the Gene Master Regulators (GMR) TASOR (PTA), FAM27C (PTB) and ALG13 (MET) and DAPK3 (NOR) were identified in each profiled region. We predict that TASOR overexpression would block transcription in PTA but not in PTB, while slightly stimulating it in NOR. Silencing of ALG3 would slow-down the cell-cycle in all three cancer regions with practically no effect in NOR.

We report the case of a 28-year-old male with uncontrolled human immunodeficiency virus (HIV) infection who presented with extensive ulcerated lesions with dark lamellated crusting on his face, torso, and limbs. The patient had an RPR of 1:512. A skin biopsy revealed granulomata surrounded by lymphocytes, histiocytes, and plasma cells, with spirochetes visible on immunohistochemical staining. This severe form of secondary syphilis has been termed malignant syphilis, lues maligna, ulceronodular syphilis, and rupioid syphilis, among other names. The patient’s rash resolved with hyperpigmented scarring after treatment with penicillin and doxycycline. First, we propose a single descriptive name for this entity, ulceronodular-rupioid syphilis. In 1967, Fisher and coworkers proposed criteria for malignant syphilis based on lesion appearance, RPR values, histopathologic findings, the occurrence of the Jarisch-Herxheimer reaction, and response to treatment. However, the Fisher criteria were found to be imprecise. Thus, we examined the features of an additional 74 cases from the medical literature and propose new diagnostic criteria based on rash appearance, histopathologic characteristics, non-treponemal and treponemal test positivity, and response to therapy. We also found that uncontrolled viremia and not a low CD4 count is a major risk factor for this severe manifestation of secondary syphilis in the HIV population.

Although a disintegrin-like and metalloproteinase with thrombospondin type-1 motifs 13 (ADAMTS13) serve as the cleaving protease of vWF-multimers, its role in liver ischemia-reperfusion injury (IRI), as well as partial liver transplantation (pLT), remains unknown. First, ADAMTS13 deficient mice were subjected to IRI to investigate the impact on hepatic IRI. Hepatic IRI significantly decreased serum ADAMTS13 activity, while simultaneously up-regulated intrahepatic vWF expression. Ablation of ADAMTS13 aggravated liver IRI by promoting platelet aggregation and disturbing microcirculation in the liv-er accompanied by exacerbated transaminase release and enhanced pro-inflammatory cytokine/chemokines levels. Adjunctive supplementation of recombinant ADAMTS13 (rADAMTS13) improved hepatic microcirculatory failure observed in ADAMTS13-null mice. Immunohistochemistry revealed massive platelet aggregation within hepatic micro-vasculatures in ADAMTS13-null mice, which was attenuated by rADAMTS13 treatment. Consequently, peripheral platelet counts, transaminase release, and pro-inflammatory cytokines/chemokines levels deteriorated in ADAMTS13-null mice, while ameliorated by rADAMTS13 administration. Notably, rADAMTS13 improved IRI-induced pathologies even in WT mice compared with those without. Next, we tested rADAMTS13 in the rat pLT model. Similarly, in rat pLT, ADAMTS13 supplementation attenuated the aforementioned pathologies observed in the experimental mouse model. In conclusion, ADAMTS13 plays a pivotal role in alleviating both hepatic microcirculation and inflammatory responses, thus providing a novel therapeutic approach against LT-related stress.

A large number of bridges are designed and built without considering seismic actions and, differently from buildings, there are currently no comprehensive guidelines to evaluate existing bridges without performing, as in the well known incremental dynamic analysis (IDA), complex non linear dynamic analyses (RHA). Bridges are structurally very different from building but, at the same time, are sensitive to higher modes as well as many multi-storey buildings that inspired innovative pushover procedures such as the well known modal pushover analysis (MPA). In the present study the incremental modal pushover analysis (IMPA), a pushover based approach already proposed and applied on buildings by the same authors, is revised and proposed for bridges (IMPAβ). IMPAβ accounts for the effects of higher modes in order to accurately estimate the seismic response of bridges; the effect of higher modes is considered by introducing a suitable number of modes to ensure the participation of a predefined total effective modal mass. The efficiency of the proposed method is demonstrated by conducting a study on two bridges, one regular and one irregular, and the IDA analysis is employed as reference solution. Numerical results indicate good accuracy of the proposed method in assessing the seismic response and a very good accuracy if compared to other available pushover procedures available in the literature.

Citizen participation has always been of vital importance in decision-making processes and, likewise, joint work in the formulation and execution of projects that respond to territorial needs. This in order to ensure the best impact of public or private investment, optimizing the result and community articulation. For this reason, this investigation proposes a methodology of evaluation and prioritization of projects based on an approach integrated between the modelling in dynamics systems (SDM) and the Analytical process network (ANP), in which the citizen factors are used as qualitative and quantitative variables inside the posed balance sheet model. This is how the model developed by the Stella Architect software, it offers to the decision makers approximate information about the reality of the community, especially those who were affected by the Colombian conflict and where the expectations of a comprehensive repair could disrupt the socioeconomic system and reveal more pressing interests than those of the central government. The methodology is described by the information gotten through the participatory workshops done in the California county that belongs to the Magdalena region, this is a very affected region by the conflict in Colombia. The investigation results confirm the useful of, first of all, the use of the modelling as an information-generating tool by allowing the simulation of relevant variables in the evaluation and prioritization of projects at different moments of time and, in second place, use the knowledge of the experts that expose the ANP method for establishing the importance of each variable compared with other variables and, likewise of each project compared to the rest of the alternatives in each of the different instants of time in which the evaluation is carried out, given that the results could change in any time, the official ranking is showed after an optimization process with partial results.

Autism Spectrum Disorder (ASD) is a complex neurodevelopmental disorder characterised by poor social interaction and communication, as well as restricted and stereotyped interests. Due of the high prevalence of gastrointestinal disorders in individuals with ASD, researchers have investigated the gut microbiota as a potential contributor to its aetiology. The relationship between the microbiome, gut, and brain (microbiome-gut-brain axis) has been acknowledged as a key factor in modulating brain function and social behaviour, but its connection to the aetiology of ASD is not well understood. Recently, there has been increasing attention on the relationship between the immune system, gastrointestinal disorders, and neurological issues in ASD, particularly in relation to the loss of specific species or a decrease in microbial diversity. It focuses on how gut microbiota dysbiosis can affect gut permeability, immune function, and microbiota metabolites in ASD. Although a very complete study suggests that dysbiosis is a consequence of the disease and that it has practically no effect on autistic manifestations. This is a review of the relationship between the immune system, microbial diversity, and the microbiome-gut-brain axis in the development of autistic symptoms severity and, a proposal of a novel role of gut microbiome in ASD, where dysbiosis is a consequence of ASD-related behaviour and where dysbiosis in turn accentuates the autistic manifestations of the patients via microbiome-gut-brain axis in a feedback circuit.

The Zika virus (ZIKV) epidemic brought new discoveries regarding arboviruses, especially flaviviruses, as ZIKV was described as sexually and vertically transmitted. The latter shows severe consequences for the embryo/fetus, such as congenital microcephaly and deficiency of the neural system, currently known as Congenital ZIKV Syndrome (CZS). To better understand ZIKV dynamics in trophoblastic cells present in the first trimester of pregnancy (BeWo, HTR-8, and control cell HuH-7), an experiment of viral kinetics was performed for African MR766 low passage and Asian-Brazilian IEC ZIKV lineages. The results were described independently, and demonstrated that the three placental cells lines are permissive and susceptible to ZIKV. We noticed cytopathic effects that are typical in vitro viral infection in BeWo and HTR-8. Regarding kinetics, MR766lp showed peaks of viral loads in 24 and 48 hpi for all cell types tested, as well as marked cells death after peak production. On the other hand, HTR-8 lineage inoculated with ZIKV-IEC exhibited increased viral production in 144 hpi, with a peak between 24 and 96 hpi. Furthermore, IEC had peak variations of viral production for BeWo in 144 hpi. Both cells types continued alive during the process of viral replication. Considering such in vitro results, the hypothesis that maternal-fetal transmission is probably a way of virus transmission between the mother and the embryo/fetus is maintained.

At present, failure definition and damage characteristic curve (DCC) analysis included in the framework to assess bitumen fatigue cracking performance have an inconsistency in ranking bitumen fatigue behaviour. This study utilized two types of self-healing polymers (STP and IPA1w) to modify the neat asphalt (NA), and research four different types of bitumens: NA, STP-modified bitumen, IPA1w-modified bitumen, and styrene-butadiene-styrene modified bitumen (SBSB), to evaluate the above-mentioned framework. All bitumens were subjected to short-term and long-term aging and tested utilizing the Linear amplitude sweep (LAS) test and simplified viscoelastic-continuum-damage (S-VECD) model. The results showed that the SBSB exhibited the highest numbers of loading cycles (in long-term aging analysis) to reach failure points at 25°C, 28°C, and 31°C which were 2290, 2340, and 2510, respectively. However, this bitumen failed to exhibit the best performance in terms of DCC assessment under the same conditions, confirming the above-mentioned inconsistency. Besides, the current failure criterion could not accurately predict bitumen fatigue behaviour under certain test conditions because two R2 values were below 0.1. As a result, this study proposed a new failure definition and failure criterion to overcome these issues. The proposed failure definition agreed with the DCC analysis to rank bitumen fatigue performance, and the proposed failure criterion showed R2 values higher than 0.9. The new framework presented the modified bitumen containing 0.5% of STP as the asphalt binder with the best fatigue cracking performance, according to the selected test conditions.

This critical review revisited the new classification system for periodontitis, specifically for staging, suggesting modifications, and introducing a new flowchart for a better clinical evaluation. It evaluated articles published between 2018 and 2024 in the English language, which had an educational motivation focused on staging periodontitis. PubMed/MEDLINE, Web of Science, and Embase databases were used to retrieve the articles. The focus questions involved the analysis of all parameters for staging periodontitis. A total of 836 articles were initially found; 388 duplicated were excluded; 448 were evaluated by title and abstract; 26 articles followed for full-text reading, and 6 articles were included in this critical review (k=0.98). All articles included detailed parameters and steps about how to diagnose periodontitis. Therefore, it was possible to observe instability and “gray zones” in the staging step, which was due to a lack of priority and an organized order sequence. This review suggests the severity parameters cannot be overcome by complexity parameters, following a cumulative sequence: CAL (1^st), RBL (2^nd), TLP (3^rd), and, after, complexity parameters. An exception must be permitted only for complexity factors between Stages III and IV that can change the initial Stage (III or IV) obtained through the severity analysis, but only between themselves. Moreover, for patients without tooth loss or with TLP of ≤4 teeth (without need for complex rehabilitation) and presenting any type of drifting or flaring or a secondary traumatic occlusion, it cannot be a justification for moving the diagnosis from Stage III to Stage IV.

Additionally, the League’s four observing states, with an additional population of 1.7 billion, if join the group, will form the world’s largest consortium to enhance the accessibility of biotechnology drugs. This effort will also remove the criticism of regulatory agencies that are well-equipped to regulate these products. This should also be a significant economic incentive to consortium states to develop these products, particularly biosimilars, to capture the most critical market anticipated. This plan will also reduce the cost burden on regulatory agencies. The program is divided into two classifications; for products sold in any of the Stringent Regulatory Authority (SRA) states, the registration is automatic but with several requirements that assure ongoing pharmacovigilance; this also applies to copies of reference products or biosimilars. For non-SRA sourcing, a stepwise plan requiring a rapporteur review, as practiced by the EMA and a third-party cGMP audit, is necessary to ensure data and product integrity. However, to reduce the cost burden, approval of these products is based on current scientific findings as presented in this paper.

Payments for Ecosystem Services are a voluntary market-based instrument to remunerate provider(s) of ecosystem services by those who benefit from them. Our research aimed to create an ex-post evaluation framework to identify bottlenecks and elements hindering the success of a solution-driven PES scheme. The framework was applied to a case study to test its feasibility and concerns the provision of health and recreational services in the Medvednica Nature Park (Zagreb, Croatia). The framework was set up through three main sources: the study of PES implementation project documentation, semi-structured interviews with visitors and key stakeholders and web-scraping of TripAdvisor reviews of the park. The main findings confirmed society's interest in the park, but the lack of mapping, quantification, economic valuation and accounting of the services analysed, society's little or no demand to pay for their provision and confused knowledge of the property rights of some ecosystem service providers in the area limit the success of the PES scheme. The framework was useful to describe the chosen PES scheme and to identify bottlenecks and fragilities of the system in place, allowing to correct its application flaws and, on the other hand, to demonstrate its replicability in other contexts.

This paper is the continuation of a previous study, which highlighted some inconsistencies in the RILEM guidelines for the interpretation of the diagonal compression test. Although improved compared to the ASTM guidelines, in fact, the RILEM guidelines underestimate the state of hydrostatic stress induced by the diagonal compression test at the center of the wallette. The new interpretation of the diagonal compression test proposed in this article shows that the RILEM guidelines actually underestimate both the hydrostatic and the deviatoric stress states at the center of the wallette. The new formulation complies with the linear elastic theory and allows us to use the the diagonal compression test to identify the three elastic coefficients of masonry. In particular, it allows the identification of the Poisson ratio, which instead takes on a conventional value in the RILEM and ASTM guidelines. The difference of one order of magnitude between the conventional and proposed Poisson’s ratio is in agreement with the experimental results on another brittle material, namely concrete. Finally, the new proposal fills the gap between the results provided by the two tests usually performed to identify the shear behavior of masonry: the diagonal compression test and the shear-compression test.

The Church of the Pious Schools of Valencia (18th century) has the largest Valencian dome constructed, with its 24.5 meter span, and it is included among the prestigious great European domes, inspired by the Pantheon and belonging to Neoclassicism. Currently, it is undergoing a thorough study and restoration process to improve the management of the monument, especially to halt its deterioration due to moisture and cracks. An initial study included in the Master Plan (1995) determined that the cracks were caused by thermal effects, but recently other studies have addressed that the failure originated from the walls. Additionally, environmental impact and thermal behavior are among the causes, as excessive humidity due to high interior occupancy can cause damage to the dome, which has historic coatings. As a result of the study process, it is proposed to sensorize the dome of the church to have comprehensive control of temperature, humidity, and CO2, as well as accelerometers to monitor the movements of the structure. With this, after the restoration of the dome, the potential effects of temperature, humidity, and CO2 on the dome's surfaces will be controlled, in addition to verifying if there is any correlation between the cracks and the temperature.

Agriculture is pivotal in national economies, with pest detection significantly influencing food quality and quantity. Pest classification remains challenging in automated agriculture monitoring systems, exacerbated by the non-uniform pest scales and the scarcity of high-quality datasets. In this study, we constructed a pest dataset by acquiring domain-agnostic images from the Internet and resizing them to a standardized 299x299 pixel format. Additionally, we employed diffusion models to generate supplementary data. While Convolutional Neural Networks (CNNs) are prevalent for prediction and classification, they often lack effective global information integration and discriminative feature representation. To address these limitations, we propose the RS Transformer, an innovative model that combines elements like the Region Proposal Network, Swin Transformer, and ROI Align. Additionally, we introduce the Randomly Generated Stable Diffusion Dataset (RGSDD) to augment the availability of high-quality pest datasets. Extensive experimental evaluations demonstrate the superiority of our approach compared to both two-stage models (SSD and Faster R-CNN) and one-stage models (YOLOv3, YOLOv4, YOLOv5m, YOLOv8, and DETR). We rigorously assess performance using metrics such as mean Average Precision (mAP), F1Score, Recall, and mean Detection Time (mDT). Our research contributes to advancing pest detection methodologies in automated agriculture systems, promising improved food production and quality.

Our purpose is to address the biological problem of finding foundations of the organization in the collective activity among cell networks in the nervous system, at the meso/macroscale, giving rise to cognition and consciousness. But in doing so, we encounter another problem related to the interpretation of methods to assess the neural interactions and organization of the neurodynamics, because thermodynamic notions, which have precise meaning only under specific conditions, have been widely employed in these studies. The consequence is that apparently contradictory results appear in the literature, but these contradictions diminish upon the considerations of the specific circumstances of each experiment. After clarifying some of these controversial points and surveying some experimental results, we propose that a necessary condition for cognition/consciousness to emerge is to have available enough energy, or cellular activity; and a sufficient condition is the multiplicity of configurations in which cell networks can communicate, resulting in non-uniform energy distribution, the generation and dissipation of energy gradients due to the constant activity. These ideas may reveal possible fundamental principles of brain organization and how healthy activity may derive to pathological states.

There is a skin allergy epidemic in the western world, and the rate of deterioration has increased significantly in the past 5-10 years. It is probable that there are many environmental contributing factors, yet some studies have linked it primarily to the rise in the use of synthetic chemical ingredients in modern cosmetics. Our challenge, therefore, was to find a mechanism to determine the effect these substances have on skin health, and whether they really are a primary cause of long term damage to the skin. The first problem is the lack of any definitive way to measure skin health. Motivated by the overwhelming evidence for a link between deficient gut flora and ill health, we decided to look at whether our skin microbiota could similarly be used as an indicator of skin health. Our research illustrates how it is microbiota diversity alone that can predict whether skin is healthy or not, after we revealed a complete lack of conclusive findings linking the presence or abundance of particular species of microbe to skin problems. This phenomenon is replicated throughout nature, where high biodiversity always leads to healthy ecosystems. ‘Caveman’ skin, untouched by modern civilisation, was far different to ‘western’ skin and displayed unprecedented levels of bacterial diversity. The less exposed communities were to western practices, the higher the skin diversity, which is clear evidence of an environmental factor in the developed world damaging skin. For the first time we propose benchmark values of diversity against which we can measure skin to determine how healthy it is. This gives us the ability to be able to predict which people are more likely to be prone to skin ailments, and start to test whether cosmetic ingredients and products are a main cause of the skin allergy epidemic.

Milk serves as a crucial source of natural bioactive compounds essential for human nutrition and health. The gastrointestinal digestion of milk proteins releases various biologically active peptides that positively impact human health and enhance physiological performance. With the growing production of cheese, Greek yogurt, and other dairy products, the volume of unutilized acid whey is significantly increasing. Acid whey, containing almost all whey proteins and approximately one-quarter of casein, presents a valuable raw material for generating peptides with potential health benefits. These peptides exhibit properties such as antioxidant, antimicrobial, anti-inflammatory, anticarcinogenic, antihypertensive, antithrombotic, opioid, mineral-binding, and growth-stimulating activities, contributing to improved human immunity and the treatment of chronic diseases. Enzymatic hydrolysis of milk proteins has been developed as a method to produce these peptides, facilitating their use in food fortification. To incorporate whey into functional beverages, it undergoes fermentation by lactic acid bacteria with proteolytic activity. To specifically enrich these beverages with peptides exhibiting targeted bioactivities, it is essential to select lactic acid bacteria strains possessing the requisite protease profiles. Additionally, the sensory properties of the final product can be enhanced using starter cultures with diverse metabolic capabilities, even in the absence of added flavoring agents. Given the imperative to develop waste-free technologies and enhance the profitability of the dairy industry, there is a growing need to efficiently utilize and transform acid whey into a broad spectrum of valuable products and food additives. This approach is justified not only by the nutritional benefits of the bioactive components in whey but also by the commercial potential of safe and health-enhancing products.

The paper focuses on the application of a multilevel, integrative and territorial approach to the protection of cultural heritage through planning instruments in Serbia. It points out the problems of the sectoral approach and discusses international recommendations that can be integrated into the planning methodology. The case study is the area of Djerdap National Park, which has an already established international and national importance. The research suggests that the cultural heritage in the area, with the exception of the Roman limes, is still recognized at the level of individual localities. The study emphasizes the importance of aligning all levels of governance to safeguard the whole spatial entity rather than focusing solely on its particular areas. The interna-tional and national importance of the planning area contributes to the strengthening of awareness of heritage and its institutional protection. However, the vitality of the area, which is key to its sustainable development, comes from the local level. Planning documents contribute to the inte-gration of local values and local communities into development programs and projects.

In order to shorten the detection time and improve the average precision on embedded devices, A lightweight and high accuracy model is proposed for passion fruit in complex environments (backlight, occlusion, overlap, sunny, cloudy, rainy). Firstly, replacing the backbone network of YOLOv5 with a lightweight GhostNet model reduces the number of parameters and computation while improving detection speed. Secondly, a new feature branch is added to the GhostNet network, and the feature fusion layer in the neck network is reconstructed to effectively combine the lower-level and higher-level features, which not only improves the accuracy of the model but also maintains its lightweight. Finally, the knowledge distillation methods are used to transfer the knowledge from the more capable teacher model to the less capable student model, which significantly improving the detection accuracy. The improved model is denoted as G-YOLO-NK. The average accuracy of the G-YOLO-NK network is 96.00%, which is 1.00% higher than the original YOLOv5s model. Furthermore, the improved model size is 7.14MB, reduced to half of the original model, and the real-time detection frame rate is 11.25 FPS on the Jetson Nano. Compared to the state-of-the-art model, the proposed model outperforms them in terms of average precision and detection performance. The present work provides an effective model for real-time detection of passion fruits in complex orchard scenes, which can provide valuable technical support for the development of orchard picking robots and greatly improve the intelligence level of orchards.

The impact of interaction SS with MJO on rainfall along Java Island to East Nusa Tenggara has been studied using daily rainfall observation data from 2140 weather observation stations, which are also equipped with GSMaP, OLR, and ERA5 data. There were 61 SS events found, 17 during active MJO and 44 in inactive MJO. Rainfall increases more in the western study area when the active MJO and more in the eastern study area when the inactive MJO is due to SS. SS reduces rainfall in the Jakarta region, regardless of the activity or inactivity of the MJO. SS causes extreme rainfall to only occur in a small part of certain areas, so it tends to significantly reduce the possibility of extreme rainfall. In the southern part of the IMC, SS predominates over MJO in supporting increased water vapor transport. Large-scale synoptic circulations like the monsoon, SS, and MJO can interact with local land-sea wind circulation to produce spatiotemporal variability in rainfall on Java Island. Rainfall mostly increases in the afternoon and decreases in the morning when SS occurs, whether there is MJO or not. Convective instability analysis indicates that SS increases precipitation, most likely by lowering CIN and raising VIMFC.

The Simultaneous Localization And Mapping (SLAM) scanner is an easy and portable Light Detection And Ranging (LiDAR) data acquisition device. Its main output is a 3D point cloud covering the scanned scene. Regarding the importance of accuracy in the survey domain, this paper aims to assess the accuracy of two SLAM scanners: the NavVis VLX and the BLK2GO Scanner. This assessment is conducted for both outdoor and indoor environments. In this context, two types of reference data are used: the Total Station (TS) and the static scanner Z+F Imager 5016. To carry out the assessment, four comparisons are tested: cloud to cloud, cloud to mesh, mesh to mesh, and edge detection board assessment. However, the results of the assessments confirm that the accuracy of indoor SLAM scanner measurements (5 mm) is greater than that of outdoor ones (between 10 mm and 60 mm). Moreover, the comparison of cloud to cloud provides the best accuracy regarding direct accuracy measurement without manipulations. Finally, based on the high accuracy, scanning speed, flexibility, and the accuracy differences between tested cases, it is confirmed that SLAM scanners are effective tools for data acquisition.

Glycosidic linkage analysis was conducted on the unfractionated polysaccharides in the alcohol-insoluble residues (AIRs) prepared from six red seaweeds (Gracilariopsis sp., Prionitis sp., Mastocarpus papillatus, Callophyllis sp., Mazzaella splendens, and Palmaria palmata) using GC-MS/FID analysis of partially methylated alditol acetates (PMAAs). The cell walls of P. palmata primarily contained mixed-linkage xylans and small amounts of sulfated galactans and cellulose. In contrast, the unfractionated polysaccharides of the other five species were rich in galactans displaying diverse 3,6-anhydro-galactose and galactose linkages with varied sulfation patterns. Different levels of cellulose were also observed. This glycosidic linkage method offers advantages for cellulose analysis over traditional monosaccharide analysis that is known for underrepresenting glucose in crystalline cellulose. Relative linkage compositions calculated from GC-MS and GC-FID measurements showed that anhydro sugar linkages generated more response in the latter detection method. This improved linkage workflow presents a useful tool for studying polysaccharide structural variations across red seaweed species. Furthermore, for the first time, relative linkage compositions from GC-MS and GC-FID measurements, along with normalized FID and total ion current (TIC) chromatograms without peak assignments, were analyzed using principal component analysis (PCA) as a proof-of-concept demonstration of the technique's potential to differentiate various red seaweed species.

Background: Educating college students about the importance of good sleep habits could lead to the adoption of healthier sleep routines, including sufficient sleep duration and sleep quality. The current pre-post study examines the impact of completing a sleep education program called “Sleep 101” on (1) sleep hygiene practices, (2) sleep quality, and (3) weekday and weekend sleep behaviors among college students. “Sleep 101” is an interactive online course developed to educate college students about the importance of sleep by addressing basic sleep physiology, the impact of sleep on mood, academic and physical performance, the interactions between sleep and various substances, and common sleep disorders. Methods: 338 college students were recruited from a midsized public university in the US and invited to participate in “Sleep 101”, of which 25 participants completed the baseline and post-intervention questionnaire. The Sleep Hygiene Index (SHI) was utilized to evaluate sleep hygiene practices, while standard questions were employed to assess weekday and weekend sleep behaviors and overall sleep quality. Results: Those who completed the study demonstrated a significant increase in weekday sleep duration and were less likely to engage in negative prior bedtime activities. In addition, 40% of those who completed baseline and post-intervention assessments noticed improvements in their sleep quality. Conclusion: These findings suggest that a brief online program is beneficial in improving sleep behaviors among college and could be a scalable approach to addressing current sleep issues and preventing future sleep problems in college students.

The profile of secondary metabolites occurring in apple cuticular layer is not only characteristic for particular apple cultivar, but also dynamically reflects various external factors in growing environment. In this study, the possibility to authenticate apple samples based on analysis of their cuticular layer extracts was investigated. Ultra-high-performance liquid chromatography coupled to high resolution tandem mass spectrometry (UHPLC-HRMS/MS) was employed for obtaining metabolomic fingerprints. In total, 274 authentic apple samples, four cultivars harvested within the seasons 2020 to 2022 in the Czech Republic and Poland were analysed. The generated complex data processed by univariate and multivariate statistical methods enabled to build classification models for discrimination of apple cultivars as well as their geographical origin. The models showed very good performance in differentiation of Czech and Polish samples for three of four cultivars: ‘Gala’, ‘Golden Delicious’ and ‘Idared’, moreover, the validity of the models was verified over harvest seasons. The diagnostic markers, besides metabolites of triterpene biosynthetic pathway, mainly represented wax esters. ‘Jonagold’, which is known to be susceptible to mutations, was the only cultivar for which the unambiguous classification of geographical origin was not possible.

Superior fiber quality is one of the most important objectives in cotton breeding. To detect the genetic basis underlying fiber quality, an F2 population containing 413 plants was constructed by crossing Jifeng 914 and Jifeng 173, both of which have superior fiber quality, with Jifeng 173 being better. Five fiber quality traits were investigated in the F2, F2:3, F2:4, and F2:5 populations. Quantitative trait loci (QTL) mapping was conducted based on a high-density genetic map containing 11,488 single nucleotide polymorphisms (SNPs) and spanning 4,202.12 cM in length. Transgressive segregation patterns and complex correlations in the five tested traits were observed. A total of 108 QTLs were found, including 27 for fiber length (FL), 16 for fiber strength (FS), 24 for micronaire (MC), 17 for fiber uniformity (FU), and 24 for fiber elongation rate (FE). Chromosome A7 contained 12 QTL, ranking the first. No QTL was found on chromosome D1 and D11. Each QTL contributed 1.98%–21.45% to the phenotypic variation (PV), including 13 major effect QTLs that contributed more than 10% toward PV. Two QTLs could be repeatedly detected in three populations, including qFL-D3-2 in F2, F2:4, and F2:5 with 9.18%–21.45% of PV, qFS-A11-1 in F2:3, F2:4 and F2:5 with 6.05%–10.41% of PV. Another seven stable QTLs could be detected in two populations, including four major effect QTLs: qFL-A12-3, qFS-D10-2, qMC-D6-2, and qMC-D8-1. Fourteen QTL-overlapping regions were found, which might explain the complex correlations among the five phenotypic traits. Four regions on chromosome A11, D3, D6, and D10 covered by both stable and major effect QTLs are promising for further fine mapping. The genomic regions of the two QTLs detected in three populations and the four major effect QTLs contain 810 genes. Gene functional analysis revealed that the annotated genes are mainly involved in protein binding and metabolic pathways. Fifteen candidate genes in the qFL-D3-2 region are highly expressed in fiber or ovules during fiber initiation, elongation, secondary cell wall thickening, or maturation stages. qRT-PCR revealed that Ghir_D03G005440.1 and Ghir_D03G011310.1 may play a role in promoting fiber initiation, Ghir_D03G006470.1 may be beneficial for promoting fiber elongation. This study provides more information for revealing the molecular genetic basis underlying cotton fiber quality.

Currently there are fewer depth models applied to pepper picking detection, while the existing generalized neural networks have problems such as large model parameters, long training time, and low model accuracy.In order to solve the above problems, this paper proposes a Yolo-chili target detection algorithm for chili pepper detection. First, the classical target detection algorithm yolov5 is used as a benchmark model, and an adaptive spatial feature pyramid structure combining the attention mechanism and the idea of multi-scale prediction is introduced to improve the model's detection effect on occluded peppers and small target peppers. Secondly, a three-channel attention mechanism module is introduced to improve the algorithm's long-distance recognition ability and reduce the interference of redundant testers. Finally, the quantized pruning method is used to reduce the model parameters and realize the lightweight processing of the model. Applying the method to the homemade chili pepper dataset, the AP value of chili pepper reaches 93.11%; the accuracy rate is 93.51% and the recall rate is 92.55%.The experimental results show that yolo-chili is able to achieve accurate and real-time pepper detection under complex orchards.

The temporary immersion system bioreactor named GreenTray®[2], [3]presents advantages over the existing ones. Firstly, there is no need to use forceps to move the shoots or plantlets in or out of the recipient, neither the use of scalpel to divide them. Secondly, the basis of the shoot can remain in the GreenTray® and can sprout again in several cycles of growth. These two characteristics reduce the costs in the process of micropropagation. Besides, shoots or plantlets development is enhanced by the aeration of the recipient, thus enriching with CO2 the recipient atmosphere. The chapter describes and provides images and values of interest in (1) the micropropagation process of some commercial Prunus or Pyrus rootstocks; (2) the plantlet growth under autotrophic conditions; and (2) the inoculation of plants with pathogens that reproduce in vitro the symptoms observed in vivo, using the GreenTray® bioreactor.

Aiming at the problems of inaccurate segmentation of long object and information loss of small object in real-time semantic segmentation algorithm, this paper proposes a lightweight multi-branch real-time semantic segmentation network based on BiseNetV2. The new auxiliary branch makes full use of spatial details and context information to cover the long object in the field of view. Meanwhile, in order to ensure the inference speed of the model, the asymmetric convolution is used in each stage of the auxiliary branch to design a structure with low computational complexity. In the multi-branch fusion stage, the alignment and fusion module is designed to provide guidance information for deep and shallow feature mapping, so as to make up for the problem of feature misalignment in the fusion of information at different scales, and thus reduce the loss of small target information. In order to further improve the model’s awareness of key information, a global context module is designed to capture the most important features in the input data. The proposed network uses NVIDIA GeForce RTX 3080 Laptop GPU experiment, on the road street view data set Cityscapes and CamVid average occurring simultaneously ratio reached 77.1% and 78.4% respectively, with running speed of 127 frames/s respectively and 112 frames/s. The experimental results show that the proposed algorithm can achieve real-time segmentation and improve the accuracy significantly, showing good semantic segmentation performance

Strawberry root rot caused by Neopestalotiopsis clavispora is one of the main diseases of strawberry and significantly impacts the yield and quality of strawberry fruit. There are now no effective control techniques available except for fungicide sprays, which may directly impact consumers. Biological control is becoming an alternative method for the control of plant diseases to replace or decrease the application of traditional synthetic chemical fungicides. Trichoderma is widely used as a biological agent for controlling strawberry root rot. In order to provide resources for screening the highly effective biocontrol fungus for controlling strawberry root rot caused by Neopestalotiopsis clavispora, the biocontrol mechanism,the control effects of Trichoderma asperellum CMT10 against strawberry root rot and growth-promoting effects on strawberry seedlings were investigated by plate culture, microscopy observation and root drenching methods.The results showed that CMT10 had obvious competitive, antibiotic and hyperparasitism effects on Neopestalotiopsis clavispora CMGF3. The CMT10 could quickly occupy nutritional space, and the inhibition rates of CMT10 against CMGF3 in confrontation culture on 7 d was 65.49%. The inhibition rates of volatile metabolite and fermentation metabolite produced by CMT10 against CMGF3 were 79.67% and 69.84%, respectively. The mycelium of strain CMT10 can act as hyperparasites by making contacting, winding and penetrating hyphae of CMGF3. Pot experiment showed that the biocontrol efficacy of CMT10 on strawberry root rot caused by Neopestalotiopsis clavispora was 63.00%. CMT10 had obvious promotion effect on strawberry growth, the plant height, root length, total fresh weight, root fresh weight, stem fresh weight and root dry weight, with the promotion rates were 20.09%, 22.39%, 87.11%, 101.58%, 79.82% and 72.33%, respectively. Overall, this study showed the ability of Trichoderma asperellum CMT10 to control strawberry root rot and their potential to develop as novel biocontrol agents to replace chemical fungicides for eco-friendly, sustainable agriculture.

In this paper we study a class of impulsive delayed neural networks with parameter uncertainties and reaction-diffusion terms. Using the properties of M-matrices and some inequality techniques, some sufficient conditions are derived to guarantee the global exponential stability of the given system. The results obtained are presented by simple algebraic inequalities, which are certainly more concise than previous methods. Finally, the validity and usefulness of our results are illustrated by arithmetic examples.

Pyrops candelaria is one of the common pests of fruit trees, but the research on the pathogenic microorganisms it may carry is very limited. Therefore, it is essential to reveal the pathogenic microbes it carries and their potential hazards. This study found a new virus from the transcriptome of P. candelaria, which was first reported in P. candelaria and named as PyCaV (Pyrops candelaria associated virus). RACE and bioinformatics assay revealed that the full-length of PyCaV is 10855 bp with the polyA tail, containing a single open reading frame (ORF) encoding a polyprotein consisting of 3171 amino acid (aa). The virus has a typical Iflavirus structure, including two rhv domains, a RNA helicase domain (HEL), a 3C cysteine protease domain (Pro), and a RNA-dependent RNA polymerase domain (RdRp). Further phylogenetic analysis revealed that this virus belongs to family Iflaviridae and sequence alignements analysis suggedted PyCaV is new member in unassigned genus of family Iflaviridae. Further in-depth analysis of virus-infection-part showed that PyCaV is distributing in the whole longan lanternfly, including its head, chest, and abdomen, but more PyCaV was identified in the chest. The distribution of PyCaV in different parts of P. candelaria was further explored, which showed that more PyCaV were detected in its piercing-sucking mouthparts and chest viscera. Statistical analysis showed that the PyCaV infection was affected by time and locations.

Apis mellifera, especially weak ones, are highly vulnerable to Carpoglyphus lactis mites, which can rapidly infest and consume stored pollen, leading to weakened colonies and potentially colony collapse. This study aimed to ascertain and investigate the prevalence of this mite in honeybee colonies across 9 provinces in the Republic of Korea (ROK). A total of 615 honeybee colonies were collected, from 66 apiaries during the spring and 58 apiaries during the summer of 2023. A 1,242 bp segment of the the Cytochrome c oxidase subunit 1 (COI) gene was amplified using the polymerase chain reaction method. The detection levels of C. lactis in the honeybees were compared between winter and summer. Based on the COI sequence analysis, the nucleotide sequence similarity of C. lactis mites isolated in the ROK with those from China (NC048990.1) was found to be 99.5%, and with those from the United Kingdom (KY922482.1) was 99.3%. This study is the first report of C. lactis in Korean apiaries. The findings in this study demonstrate a significantly higher detection rate in winter, which is 4.1 times greater than that in summer (p &lt; 0.001). Furthermore, the results underscore the usefulness of molecular diagnostic techniques for detecting C. lactis mites.

With the burgeoning growth of online retail, the issue of counterfeit products has become a significant threat to both consumer trust and brand integrity, posing challenges to sustainable market practices. Online retail platforms are promoted to redesign their channel structures and enhance brand traceability to tackle counterfeits using blockchain technology. To investigate the interactions between blockchain technology and the channel structures of online retail platforms, we design a game theory model incorporating a manufacturer with(out) blockchain participation selling products via an online retail platform that operates an agency channel and/or a reselling channel. We show that the critical trade-off of blockchain participation comprises the brand assurance effect of the blockchain, the channel competition intensification effect, and the blockchain adoption cost. The platform is capable of strategically designing the channel structure to encourage (while discouraging) blockchain participation by the manufacturer. Our analysis highlights the complementarity between blockchain participation and the channel structure. Furthermore, the effect of the consumer’s belief in the reselling channel, the commission fee in the agency channel, and the substitutability between channels are investigated in depth. The research provides valuable insights for online retail platforms and policymakers seeking to foster a sustainable and trustworthy e-commerce ecosystem.

COX II containing a dual core CuA active site is one of the three core subunits of mitochondrial Cco, which plays a significant role in the physiological process. In this report, the full-length cDNA of COXⅡ gene was cloned from Sitophilus zeamais, which had an ORF of 684 bp encoding 227 amino acids residues. The predicted COXⅡ protein had a molecular mass of 26.2 kDa with pI value of 6.37, and multiple sequence alignment and phylogenetic analysis indicated that Sitophilus zeamais COXⅡ had high sequence identity 78.51% with the COXⅡ of other insect species, especially similarity to sitophilus oryzae. This gene was subcloned into the prokaryotic expression vector pET-32a, and induced by IPTG in E.coli Transetta (DE3) expression system. Finally the COXⅡ with 6-His tag was purified using affinity chromatography with Ni²⁺-NTA agarose. WB showed the recombinant COXⅡ was about 44 kD, and the concentration of fusion protein was 50μg/mL. UV-spectrophotometer and infrared spectrometer analysis showed that recombinant COXⅡ could catalyze the oxidation of substrate Cytc, and influenced by AITC. It was found that AITC could form a hydrophobic region with COXⅡ protein via molecular docking, besides, a sulfur atom of AITC structure could form a length of 2.9 Å hydrogen bond with Leu-31. These results will provide valuable information for elucidating the role of COXⅡ in Sitophilus zeamais responses to AITC, meanwhile, it will helpful to carry out a point mutation in AITC binding sites for the future research.

The properties of the annual, semiannual and triennial oscillations (AO, SAO and TO) in the middle atmosphere have been investigated using the TIMED/SABER temperature data. The Lomb-Scargle and wavelet spectra were used to determine the dominant oscillations in the background temperature field. The AO is prominent at the mid-latitudes. The AO amplitudes present an asymmetry between the two Hemispheres, being larger in the mesosphere than in the stratosphere. The SAO dominates the tropical regions, with three amplitude maxima at altitudes of 45, 75, and 85 km. The SAOs in the upper mesosphere (75 km) are out of phase with those in the mesopause (85 km) in the tropical regions, which can generate an enhancement of 11 K at each equinox, contributing to the lower mesospheric inversion layer. The TO is significant in the tropical region, with amplitude being maximum at 35, 45 and 85 km. Result shows that there may be potential interaction by the TO with SAO at 85km at the equator. The relation between ENSO and TO has also been discussed. The ENSO signal may modulate the amplitude of the TO, mainly in the lower stratosphere. The real origin of the TO may lie in the wave-mean-flow interaction.

The paper describes the new method for image compression based on coordinated group signal transformation. The algorithm is a type of difference coding. Coordinated processing significantly simplifies the difference signal conversion scheme using a single group codec for all signals. The described method considers color channels as correlated signals of a multi-channel communication system. The specifics of the processed data required modification of the coordinated group processing algorithm. First, we changed how to calculate the difference signals to prevent data loss. Secondly, the group codec was supplemented with a neural network to improve the quality of reconstructed images. We considered the following types of neural networks: fully connected, recurrent, convolution, and convolution in the Fourier space. Based on the simulation results, it is best to use fully connected neural networks if the goal is to minimize processing delay time. These networks have a response time of 13 ms. On the other hand, if the priority is to improve quality in cases where delays are not critical, then convolution neural networks in the Fourier space should be used. These networks have a response time of 140 ms and are of significant interest.

As the world population grows, fulfilling the need for biomaterials in the healthcare system becomes increasingly important. Biomaterials, which include metals, polymers, ceramics, and composites, play an important role in the creation of medical devices that improve people's lives. The European Society for Biomaterials described biomaterials as non-biological materials used in medical devices to interact with biological systems. This definition has developed to encompass materials that treat, assess, or replace tissues or bodily functions. Biocompatibility, as defined by the FDA, is a key feature of biomaterials, as is the requirement to fulfil design requirements such as mechanical performance, geometry, and electrical control. Over the last decade, advances in regenerative medicine and tissue engineering have boosted biomaterials' usage in medical applications dramatically. Despite its promise, scientists, engineers, and physicians continue to face significant challenges due to the complexity of biomaterials. Biomaterials have various benefits, including biodegradability, non-toxicity, and biocompatibility, making them extremely useful for replacing, sustaining, or improving biological activities in damaged tissues. They are used in a wide range of applications, including tissue engineering implants, human tissue healing and regeneration, medication delivery systems, and biosensors. This study gives insights into the fundamental characteristics, case studies, and ethical issues associated with the usage and use of biomaterials, further examining their potential and significance in healthcare and medicine.

The studied solar pot is a recent invention, which gained a utility model protection in 2021 from the Hungarian Intellectual Property Office under patent number 5489. The device is made for environmentally friendly cooking or heating (by utilizing solar energy) of foods and liquids. Its structure is similar to a double pipe heat exchanger, it has an outer mantle and an inner cooking tank. The goals of the paper are proposing a new physically-based mathematical model describing the solar pot and carrying out computer experiments with it, assembling an experimental system of the pot connected with a solar collector and performing measurements on it. Based on the results, the solar pot can successfully be used for cooking or sterilizing foods or liquids during the studied time period, in Hungary.

The research reported on this paper was aimed at improving the overall efficiency of a PDO certified artisanal cheese production process. Being a PDO certified foodstuff by the EU, it is considered to have properties and qualities determined by the geographical environment in which is made, with its production taking place in a specific and determined geographical location, in this case the Serra da Estrela region. In that sense, the authors conducted a mapping according to a systemic perspective of the processes involved in the context of manufacturing and distribution of certified Serra da Estrela cheese. Numerous methods were used throughout the process, such as a systemic design analysis, and techniques derived from ethnographic methods, which led to the collection of data in the field and consequently provided the immersion of the researcher in genuine work situations. Critical points were identified and emphasized in the systemic map with the purpose of encouraging initiatives to address and overcome the gaps and inefficiencies detected. The systemic design analysis triggered the development of design work. Observations following an ethnographic approach identified ergonomic risks in cheese making during the process of cutting excess chips, fostering the emergence of musculoskeletal disorders at the wrist. A tool that fits best to the task at hand was developed. A prototype of the new tool enabled collecting feedback from use in the work context, in order to inform product development. The domains of agricultural production and microbiology, considering the specific microorganisms developed trough the ripening process of the cheese, turned out to be aspects of high importance for the issue under focus, contributing to a broader understanding of the ripening process and its risks, simultaneously improving the efficiency and success of cheese production. If it were not for the systemic analysis, which served as a link between the boundaries of distinct domains such as the risk of microorganism contamination, ergonomics, energy efficiency, legislation and regulation policies, transportation challenges and economic viability, approached throughout the research. Simultaneously creating bridges between them, the various problems might not have been detected in the first place, as they are usually addressed in specialized disciplines, predetermined by the restrictions of each specific area of knowledge. As a consequence of the development of this research, which was based on an analysis that sought to establish possible connections between various disciplines and tried to constantly maintain a holistic perspective, making new connections and observing the issues from a new angle, apart from the already established methodologies. All this allowed to lay out the seeds for the development of a plan to tackle the critical points identified by the systemic analysis reported in this paper.

Abstract: Transcription factors are crucial pre-transcriptional regulatory mechanisms that can modulate the expression of downstream genes by binding to their promoter regions. DOF (DNA binding with One Finger) proteins are a unique class of transcription factors with extensive roles in plant growth and development. Our previous research indicated a decrease in iron content in chlorotic bamboo leaves. However, to our knowledge, genes related to iron metabolism pathways in bamboo species have not yet been studied. Therefore, in the current study, we identified iron metabolism-related (IMR) genes in bamboo and determined the transcription factors that significantly influence them. Among these, DOFs were found to have widespread effects and potentially significant impacts on their expression. We identified specific DOF members in Dendrocalamus latiflorus with binding abilities through homology with Arabidopsis DOF proteins, and established connections between some of these members and IMR genes using RNA-seq data. Additionally, molecular docking confirmed the binding interactions between these DlDOFs and the DOF binding sites in the promoter regions of IMR genes. The co-expression relationship between the two gene sets was further validated using q-PCR experiments. This study paves the way for research into iron metabolism pathways in bamboo and lays the foundation for understanding the role of DOF transcription factors in D. latiflorus.

This paper is focused on typical rural settlements in the Stara Planina Mountain area in Serbia. They are distinguished by their authenticity, identity and character, and they have still not been destroyed by inappropriate development as is the case in some other mountain areas in Serbia, where the effects of urbanization, globalization and homogenization are obvious. Consequently, there is a need to prevent these effects in mountain areas where there is a threat of disbalance between development and the inherited natural and cultural values. The paper starts from several important concepts that relate contemporary approaches to cultural heritage preservation, place morphology and planning future development. The concept definitions from recent documents from related fields are used. These concepts are then applied to the area of Stara Planina Mountain and its rural settlements. The necessity for an integrative approach to planning this area with significant natural and anthropogenic potential is pointed out, including its integration into international programs of sustainable development.

The wetlands in northeastern Bangladesh are home to some of the most prolific and valuable ecosystems on the planet, offering a wide range of benefits to both the local and wider communities. A limited number of research on this topic have been carried out in various wetlands in coastal hilsa, but none have been located in the northeastern region of Bangladesh. Thus, the goal of this study was to better understand the most commercially relevant species (anadromous hilsa) in northeastern Bangladesh as well as to assess the wetland ecosystem services more thoroughly with the contribution of their fish genetic resources. In addition to laboratory studies, fieldwork was done in the fishing settlements along the Surma River, Hakaluki Haor, and Tanguar Haor. The study classified 77 fish species into 21 subcategories of ecosystem services, of which 56% were not threatened, 17% were vulnerable, and 10% were highly endangered. The species Hilsa was found to be the most economically significant, accounting for 1% of the GDP overall. The study determined if the hilsa stock of the examined wetlands maintains a single or several subpopulations in comparison to other parts of the country when they migrate from saline water to northeastern Bangladesh (freshwater). But when compared to other groups, the FST score was between 0.000 to 0.017, indicating that the populations are identical and that there is genetic material sharing between them. Additionally, these statistics imply that the Sylhet haor and adjacent river systems contain a single stock of Hilsa fish. Nevertheless, a number of stresses and risks, including overexploitation, illicit and destructive fishing, siltation, and natural disasters like flash floods, have been linked to changes in the supply of hilsa and other ecosystem services. This study also emphasizes the necessity of policy attention and research to address the concerns.

Severe acute respiratory syndrome coronavirus type 2 (SARS-CoV-2) continues to be a global threat due to its ability to evolve and generate new subvariants, leading to new waves of infection. Additionally, other coronaviruses like Middle East respiratory syndrome coronavirus (MERS-CoV, formerly known as hCoV-EMC) which first emerged in 2012, persists and continues to present a threat of severe illness to humans. The continued identification of novel coronaviruses, coupled with the potential for genetic recombination between different strains, raises the possibility of new coronavirus clades of global concern emerging. As a result, there is a pressing need for pan-CoV therapeutic drugs and vaccines. After extensive optimization of an HCV protease inhibitor screening hit, a novel 3CLPro inhibitor (MK-7845) was discovered and subsequently profiled. MK-7845 exhibited nanomolar in vitro potency with broad spectrum activity against a panel of clinical SARS-CoV-2 subvariants and MERS-CoV. Furthermore, when administered orally, MK-7845 demonstrated a notable reduction of viral burdens by &gt;6 log orders in the lungs of transgenic mice infected with SARS-CoV-2 (K18-hACE2 mice) and MERS-CoV (K18-hDDP4 mice).

The continuous casting process of helical fiber reinforced metal matrix composites was proposed, and the experimental equipment was designed and manufactured. The relationship model be-tween the process parameters and the helical shape of the fibers in the metal matrix is analyzed by differential geometry. Helical carbon fiber reinforced lead matrix composites were prepared under different conditions. When the melting temperature and cooling intensity were increased, the helical radius of helical carbon fiber in lead matrix was increased. When the fiber rotation speed was increased, the helical radius was decreased, and the helical pitch was de-creased proportionally. The experimental results are consistent with the process model. Carbon fiber rein-forced aluminum composites were prepared. Scanning electron microscopy showed that the infiltration between the aluminum matrix and the carbon fiber was not complete. As the volume fraction of carbon fiber which was added in composites is too small, the mechanical properties of the composites have not been significantly improved.

This article presents an innovative approach to the design of a safe adaptive backstepping control system. Tailored specifically for underactuated marine robots, the system utilizes simple sensors for enhanced practicality and efficiency. Given their operation in diverse oceanic environments fraught with various sources of uncertainties, ensuring the system's safe and robust behavior holds paramount importance in the control literature. To address this concern, this paper introduces a control strategy designed to ensure robustness at both the kinematic and dynamic levels. By emphasizing the compensation for the system uncertainties, the design integrates a straightforward fuzzy system structure. To further ensure the system's safety, a funnel surface is defined, followed by the design of a suitable nonlinear sliding surface as a function of the funnel and tracking error. Specifically leveraging the Lyapunov function, the study formally establishes the Semi-globally Practically Finite-time Stability of the closed-loop system, validated through simulations conducted on underactuated marine robots.

Several types of guided bone regeneration materials are available with various properties and clinical indications. Among them, dentin-derived matrix from extracted teeth is an excellent alternative to traditional graft materials, such as allografts and xenografts. Different clinical preparation protocols exist: block form versus powder form, demineralized versus non-demineralized form. Out of these methods, demineralization protocols for dentin-derived matrix from extracted teeth have been noted for a wide range of successful clinical outcomes. The purpose of this animal study was to find out the most effective method of demineralizing dentin-derived matrix to result in the highest regenerative ability in the bone graft material in rabbit calvaria. The study conducted a comparative histomorphometric analysis of four groups in distinguished matrix conditions: a control group without graft placement, a non-demineralized dentin-derived matrix graft placement group, a 15-minute demineralized dentin-derived matrix graft placement group, and a 30-minute demineralized dentin-derived matrix graft placement group. Regenerative processes were evaluated three times at 2, 4, and 8 weeks post-graft placement. These groups of rabbits were evaluated randomly in a blinded setting to prevent bias. Among the four groups compared, the group with a 15-minute demineralized dentin-derived matrix graft showed the most efficient bone regeneration in the histomorphometric analysis. Based on this animal study, it was apparent that a 15-minute demineralization of dentin-derived matrix is the preferred preparation protocol to maximize the regenerative potential in the matrix.

Promoting green development has become an important way to optimize the ecological and economic structure and promote sustainable development. The Yangtze River Economic Belt is an important economic corridor in China, and it remains to be examined whether the implementation of environmental regulations has enhanced the green total factor productivity (GTFP) of cities. This paper calculates the green total factor productivity of 107 cities within the Yangtze River Economic Belt by using the super-efficient SBM model and the GML index with Chinese city panel data from 2007-2019 and measures the intensity of environmental regulations through textual analysis. The bidirectional fixed-effects model constructed in this paper suggests an inverted U-shaped relationship between environmental regulation and GTFP, which is confirmed by a series of robustness tests. Green technology innovation and advanced industrial structure play a mechanism role in this. In regions with lower levels of green technology and industrial structure, the inverted U-shaped relationship between environmental regulation and green total factor productivity is more significant. In addition, the phenomenon of GTFP rising and then falling because of environmental regulation is more obvious in cities in the middle and upper reaches of the Yangtze River and outside the urban agglomerations. Therefore, when formulating environmental regulation policies, it is necessary to balance the relationship between economic development and environmental protection and harmonize the environment and economic development of the entire Yangtze River Basin.