Recognition, decoding and tracking of vortex patterns is of increasing importance in many fields reaching from astronomical observation of distant galaxies to turbulence phenomena in liquids or gases. Currently, coherent light beams with orbital angular momentum (OAM) are of particular interest for optical communication, metrology, micro-machining or particle manipulation. One common task is to identify characteristic spiral patterns in pixelated intensity maps at real-world signal-to-noise ratios. Recently, Fast Fourier Transform (FFT) was applied to the quantitative analysis of spiral interference patterns of OAM beams. Our study considers this approach in more detail. It is demonstrated that specific information can be extracted by combining conformal mapping by polar transform with determining one- or two-dimensional angular frequency spectra either in spatially fixed or scanning mode. Results of proof-of-principle experiments are presented.

Aflatoxin M1 (AFM1), a carcinogenic toxin, mainly contaminates cow milk and poses significant challenges to the dairy industry and, thereby, public health in most tropical countries, including Ethiopia. This study aimed to investigate the prevalence and level of AFM1 in raw cow milk collected from Specialized Dairy Farms and Milk Vendors in three Urban Centers: Chiro town, Dire Dawa, and Harar cities in Eastern Ethiopia. 180 milk samples were collected from two major Milk Sources: Specialized Dairy Farms (N=90) and Milk Vendors (N=90) using a simple random sampling technique. AFM1 was analyzed using high-performance liquid chromatography. The study revealed that, 63.9% (115/810) prevalence and 0.179±0.48µg/L mean of AFM1 level in milk, which 39.13% and 26.08% exceed the tolerable limits of EU and FDA respectively. A 40.0% prevalence and 0.344±0.72µg/L average of AFM1 in the milk from Dire Dawa city was significantly higher than the samples from other Urban Centers. However, 30.43% and 29.57% prevalence as well as 0.055±±0.13µg/L and 0.140±0.33µg/L average of AFM1 in milk from Chiro town and Harar city, respectively were not significant. Furthermore, milk samples from Dairy Farms revealed a higher prevalence (57.39%) and level (0.252±0.64µg/L) of AFM1 than Milk Vendors, with a prevalence of 42.61% and an average of 0.107±0.21µg/L. Therefore, this study concludes that substantial milk samples were contaminated by AFM1 and urges the need to enhance farmers' awareness on mitigation.

The radar sensor described realizes healthcare monitoring capable of detecting subject chest-wall movement caused by cardiopulmonary activities, and wirelessly estimating the respiration and heartbeat rates of the subject without attaching any devices to the body. Conventional single-tone Doppler radar can only capture Doppler signatures because of a lack of bandwidth information with noncontact sensors. In contrast, we take full advantage of impulse radio ultra-wideband (IR-UWB) radar to achieve low power consumption and convenient portability, with a flexible detection range and desirable accuracy. A noise reduction method based on improved ensemble empirical mode decomposition (EEMD) and a vital sign separation method based on the continuous-wavelet transform (CWT) are proposed jointly to improve the signal-to-noise ratio (SNR) in order to acquire accurate respiration and heartbeat rates. Experimental results illustrate that respiration and heartbeat signals can be extracted accurately under different conditions. This noncontact healthcare sensor system proves the commercial feasibility and considerable accessibility of using compact IR-UWB radar for emerging biomedical applications.

Nondipole terms in the atom-laser interaction arising due to the presence of a magnetic component in an electromagnetic wave and its inhomogeneity lead to nonseparability of the center-of-mass (CM) and electron variables in the neutral atom and, as a consequence, to its acceleration. We investigate this effect as well as the accompanying excitation and ionization processes for the hydrogen atom in strong (1012 - 2×1014 W/cm2) linearly polarized short-wavelength (5eV ≲ℏω≲ 27 eV) electromagnetic pulses of about 8 fs duration. The study has been carried out within the framework of a hybrid quantum-quasiclassical approach in which the coupled time-dependent Schrödinger equation for an electron and the classical Hamilton equations for the CM of an atom are simultaneously integrated. Optimal conditions with respect to the frequency and intensity of the electromagnetic wave for the acceleration of atoms without their noticeable ionization are found in the analyzed region.

We reviewed various physical and biological manifestations of an unprecedented large-scale water temperature anomaly that emerged in the Northeast Pacific in late 2013. The anomaly dubbed “The Blob” persisted through 2014-2016, with some signs of its persistence through 2017-2018 and a possible reemergence in 2019. The tentative timeline of The Blob’s successive appearances around the Northeast Pacific is suggestive of its advection by currents around the Gulf of Alaska, along the Aleutians, into the Bering Sea, and eventually to the Bering Strait. During the initial phase of The Blob’s development in 2013-2014, advection along the Polar Front might have played a certain role. The extreme persistence and magnitude of The Blob resulted in numerous and sometimes dramatic ecosystem responses in the eastern Bering Sea. The multi-year duration of The Blob might have preconditioned the Bering Sea for the record low seasonal sea ice extent during the winter of 2017-2018 and disappearance of the cold pool in 2016 and 2018 that profoundly affected zooplankton, invertebrates, fishes, sea birds, and marine mammals. Comparison of time-series of population responses across trophic levels suggests that The Blob lowered primary production during spring, increasing small copepod production and jellyfish, and reducing energy transfer efficiently to higher trophic levels. While the Bering Sea’s water temperature, seasonal sea ice, and cold pool seem to return to the long-term mean state in 2022, it remains to be seen if the Bering Sea ecosystem will completely recover. The two most likely alternative scenarios envision either irreversible changes or hysteresis recovery.

Beyond the usual ferromagnetic and paramagnetic phases present in spin systems, the usual q-state clock model, presents an intermediate vortex state when the number of possible orientations q for the system is equal to 5 or larger. Such vortex states give rise to the Berezinskii-Kosterlitz-Thouless (BKT) phase present up to the XY model in the limit q→∞. Based on information theory, we present here an analysis of the classical order parameters plus new short-range parameters defined here. Thus, we show that even using the first nearest neighbors spin-spin correlations only, it is possible to distinguish the two transitions presented by this system for q greater than or equal to 5. Moreover, the appearance at relatively low temperature and disappearance of the BKT phase at a rather fix higher temperature is univocally determined by the short-range interactions recognized by the information content of classical and new parameters.

Sports are framed within the context of the Olympic spirit and are, therefore, within the vision and mission of the Olympic Committee, aimed at “building a better world”. This is identified as a fundamental value and sustainability is therefore explicitly considered to be a “working principle” of this. In this research an analysis of the performance of professional European football teams publicly listed on stock markets, restating the income statements according to the Value-Added perspective is carried out. This takes into account the effective sustainable contribution in the distribution of added value with reference to the human, structural, debt, infrastructural, and risk capitals of these organisations. The Value-Added Statement is considered as a part of the broader CSR Reporting and can be traced back to the late 1970s. However, it is in widespread contemporary use and is regarded as being both a credible and a tested measure. In this paper, the authors apply a slightly modified and simplified version of this tool to these publicly listed European football clubs as a proxy for wider professional sport. This research demonstrates that, although professional sports clubs are profit-oriented, the distribution of wealth generated by the added value is unbalanced. In most cases, at least in financial terms, shareholders are the most disadvantaged and athletes are the most rewarded.

The present paper deals with the investigation, at conceptual level, of the performance of short-medium-range aircraft with hydrogen propulsion. The attention is focused on the relationship between figures of merit related to transport capability, such as passenger capacity and flight range, and the parameters which drive the design of liquid hydrogen tanks and their integration with a given aircraft geometry. The reference aircraft chosen for such purpose is a box-wing short-medium-range airplane, object of study within a previous European research project called PARSIFAL, capable to cut the fuel consumption per passenger-kilometre up to 22%. By adopting a retrofitting approach, non-integral pressure vessels are sized to fit into the fuselage of the reference aircraft, under the assumption that the main aerodynamic, flight mechanic and structural characteristics are not affected. A parametric model is introduced to generate a wide variety of fuselage-tank cross-section layouts, from a single tank with the maximum diameter compatible with a catwalk corridor to multiple tanks located in the cargo deck , and an assessment work-flow is implemented to perform the structural sizing of the tanks and analyse their thermodynamic behaviour during the mission. This latter is simulated with a time-marching approach that couples the fuel request from engines with the thermodynamics of the hydrogen in the tanks, which is constantly subject to evaporation and, depending on the internal pressure, vent-ed-out in gas form. Each model is presented in detail in the paper and results are provided through sensitivity analyses to both the technology parameters of the tanks and the geometric parameters influencing their integration. The guidelines resulting from the analyses indicate that light materials, such as the Aluminium alloy AA2219 for tanks’ structure and polystyrene foam for the insulation, should be selected. Preferred values are also indicted for the aspect ratios of the vessel components, i.e. central tube and endcaps, as well as suggestions for the integration layout to be adopted depending on the desired trade-off between passenger capacity, as for the case of multiple tanks in the cargo deck, and achievable flight ranges, as for the single tank in the section.

Railway has been used as one of the most crucial means of transportation in public mobility and economic development. For efficiently operating railways, the electrification system in railway infrastructure, which supplies electric power to trains, is essential facilities for stable train operation. Due to its important role, the electrification system needs to be rigorously and regularly inspected and managed. This paper presents a supervised learning method to classify Mobile Laser Scanning (MLS) data into ten target classes representing overhead wires, movable brackets and poles, which are recognized key objects in the electrification system. In general, the layout of railway electrification system shows a strong regularity of spatial relations among object classes. The proposed classifier is developed based on Conditional Random Field (CRF), which characterizes not only labeling homogeneity at short range, but also the layout compatibility between different object classes at long range in the probabilistic graphical model. This multi-range CRF model consists of a unary term and three pairwise contextual terms. In order to gain computational efficiency, MLS point clouds is converted into a set of line segments where the labeling process is applied. Support Vector Machine (SVM) is used as a local classifier considering only node features for producing the unary potentials of CRF model. As the short-range pairwise contextual term, Potts model is applied to enforce a local smoothness in short-range graph. While, long-range pairwise potentials are designed to enhance spatial regularities of both horizontal and vertical layouts among railway objects. We formulate two long-range pairwise potentials as the log posterior probability obtained by Naïve Bayes classifier. The directional layout compatibilities are characterized in probability look-up tables which represent co-occurrence rate of spatial relations in horizontal and vertical directions. The likelihood function is formulated by multivariate Gaussian distributions. In the proposed multi-range CRF model, the weight parameters to balance four sub-terms are estimated by applying the Stochastic Gradient Descent (SGD). The results show that the proposed multi-range CRF can effectively classify detailed railway elements, representing the average recall of 97.66% and the average precision of 97.07% for all classes.

There are now a wide variety of global metrics. To find the degree of overlap between these different measures, we employ a principal components analysis (PCA) to 15 indices across 145 countries. Our results demonstrate that the most important underlying dimension highlights that economic development and social progress go hand in hand with state stability. The results are used to produce categorical divisions of the world. The threefold division identifies a world composed of what we describe and map as Rich, Poor and Middle countries. A five-group classification provided a more nuanced categorization described as; The Very Rich, Free and Stable, Affluent and Free, Upper Middle, Lower Middle, and Poor and Not Free.

The electronic structure of 7/9-AGNR superlattices with up to eight unit cells has been studied by means of state of the art Density Functional Theory (DFT) and also by two model Hamiltonians, the first one including only local interactions (Hubbard model, Hu) while the second one is extended to allow long-range Coulomb interactions (Pariser, Parr and Pople model, PPP). Both are solved within mean field approximation. At this approximation level, our calculations show that 7/9 interfaces are better described by spin non-polarized solutions than by spin-polarized wavefunctions. Consequently, both Hu and PPP Hamiltonians lead to electronic structures characterized by a gap at the Fermi level that diminishes as the size of the system increases. DFT results show similar trends although a detailed analysis of the density of states around the Fermi level shows quantitative differences with both Hu and PPP models. Before improving model Hamiltonians, we interpret the electronic structure obtained by DFT in terms of bands of topological states: topological states localized at the system edges and extended bulk topological states which interact between them due to the long-range Coulomb terms of Hamiltonian. After careful analysis of the interaction among topological sates, we find that the discrepancy between ab initio and model Hamiltonians can be resolved considering a screened long-range interaction that is implemented adding an exponential cutoff to the interaction term of PPP model. In this way, an adjusted cutoff distance λ = 2 allows a good recovery of DFT results. In view of this, we conclude that the correct description of the density of states around the Fermi level (Dirac point) needs the inclusion of long-range interactions well beyond Hubbard model but not completely unscreened as is the case for the PPP model.

Confinement can induce substantial changes in the physical properties of macromolecules in suspension. Soft confinement is a particular class of restriction where the boundaries that constraint the particles in a region of the space are not well-defined. This scenario leads to a broader structural and dynamical behavior than the observed in systems enclosed between rigid walls. In this contribution, we study the ordering and diffusive properties of a two-dimensional colloidal model system subjected to a one-dimensional parabolic trap. Increasing the trap strength makes it possible to go through weak to strong confinement, allowing a dimensional transition from two- to one-dimension. The non-monotonic response of the static and dynamical properties to the gradual dimensionality change affects the system phase behavior. We find that the particle dynamics is connected with the structural transitions induced by the parabolic trap. In particular, at low and intermediate confinement regimes, complex structural and dynamical scenarios arise, where the softness of the external potential induces melting and freezing, resulting in faster and slower particle diffusion, respectively. Besides, at strong confinements, colloids move basically along one direction, and the whole system behaves structurally and dynamically similar to a one-dimensional colloidal system.

Voronoi entropy for the random patterns and patterns demonstrating various elements of symmetry are calculated. The symmetric patterns are characterized by the values of the Voronoi entropy very close to those inherent to random ones. This contradicts the idea that the Voronoi entropy quantifies the ordering of the seed points, constituting the pattern. The extension of the Shannon-like formula embracing symmetric patterns is suggested. Analysis of Voronoi diagrams enables revealing of the elements of symmetry of the pattern.

A power factor correction (PFC) rectifier is compulsory for any electronic circuitry connected to the electrical grid. The majority of PFCs that are utilized are based on a step-up converter that supplies high DC voltage at its output terminal. Electric vehicle battery voltage varies from a few hundred to almost a thousand volts. Thus, an additional conversion step is obligatory when designing an all-brand universal charger. This paper presents a new type of front-end versatile step up / down three voltage level PFC. The rectifier can operate in continuous conduction mode or discontinuous conduction mode. First, the rectifier’s principle of operation is described, and then an innovative rectifier is analyzed for continuous and discontinuous conduction modes. Finally, the proposed theory is experimentally validated in a multiplier-less dual loop mode at discontinuous conduction modes. It was shown that although there is no multiplier use in the control circuitry, the power factor is near unity. It was revealed that the rectifier could swing the output voltage from 50 V to 900 V while the input voltage was 230 Vrms. The innovative topology suits any standard PFC rectifier, three-level voltage supplement, and dual-stage low-voltage power supply.

The aim of this study was to measure the effects on 3D active cervical Range of Motion (ACROM) and perceived pain of a n elastic taping (ET) application in the cervical area. Thirty participants (n: 22M and 8F, age 35.4±4.4 years; body height 173.1±8.4 cm; body mass 73.5±12.8 kg) for the study group (SG) and twenty subjects (n: 11M and 9F, age 32.6±3.9 years; body height 174.9±10.9 cm; body mass 71.2±12.9 kg) for the control group (CG) were recruited. All subjects were symptomatic for neck and cervical pain in baseline condition. Each group performed on ACROM test and the perceived pain on neck basing as Numerical Rating Scale (NRS 0-10, a.u.): at the baseline (T0); after 20' from ET application (T1); after three days of wearing the ET application (T2). Between T0 and T1 an ET was applied on the cervical area of the SG participants. Statistical analysis did not show any significant change in CG in any measurement session for ACROM and neck pain parameters. Conversely, the SG showed significant improvements for ACROM rotation left (T0 64.8 ± 7.7° - T2 76.0 ± 11.1° p < 0.000) and right (T0 66.0 ± 11.9° - T2 74.2 ± 9.6° p < 0.000); lateral inclination left (T0 37.5 ± 6.9° - T2 40.6 ± 10.8° p < 0.000) and right (T0 36.5 ± 7.9° - T2 40.9 ± 5.2° p < 0.000); flexion posterior (T0 47.0 ± 12.9° - T2 55.1 ± 12.3° p < 0.001) and anterior (T0 55.0 ± 3.6° - T2 62.9 ± 12.0° p < 0.006). A significant decrease was measure also in SG for pain NRS between T0 and T2 (T0 7.5 ± 1.0° - T1 5.5 ± 1.4 - T2 1.4 ± 1.5° p < 0.000). In conclusion, the results of this study underline the usefulness of a bilateral and symmetrical ET cervical application in terms to enhance multiplanar ACROM and to reduce subjective self-perceived cervical pain when it is needed. These findings can be applied for managing musculoskeletal health of different kind of individuals.

A simple model has been used to investigate the nature of chemical order in Na-Pb and Na-Hg liquid binary alloy at 700K and 673K respectively. The energy parameter obtained from the model was used to calculate the concentration dependent mixing properties such as Gibb’s free energy of mixing, Concentration fluctuations in the long wavelength limit and the Warren-Cowley chemical short range order parameter. Results obtained showed that both alloys are hetero-coordinated throughout the entire concentration and there is tendency for segregation and demixing to take place in the liquid alloys. We observed that Na-Hg liquid alloy is more strongly interacting binary alloy and chemically ordered than Na-Pb liquid alloy.

Oedaleus decorus asiaticus, Calliptamus abbreviatus, Angaracris rhodopa, and Myrmeleotettix palpalis are the main grasshoppers that harm the natural grassland in the Hexi Corridor. In this study, the MaxEnt model was employed to identify the key environmental factors affecting the distribution of the four grasshoppers habitats and to assess their distribution under current and future climate change conditions. The aim was to provide a basis for grasshopper monitoring, prediction, and precise control. In this study, 61 occurrences of O. decorus asiaticus, 68 occurrences of A. rhodopa, 58 occurrences of C. abbreviatus, and 92 occurrences of M. palpalis were recorded by GPS, and the distribution of suitable habitats for O. decorus asiaticus, C. abbreviatus, A. rhodopa, and M. palpalis were predicted under current and future climatic scenarios using a MaxEnt model. The average AUC and TSS values of the four grasshoppers were greater than 0.9, and the simulation results were excellent and highly reliable. The mean annual precipitation was the main factor limiting the current range of suitable areas for these four species. Under the current climate, O. asiaticus, C. abbreviatus, and A. rhodopa were mainly distributed in the central and eastern parts of the Hexi Corridor, and M. palpalis was distributed throughout the Hexi Corridor, with a potential distribution area of 1.44×104, 1.43×104, 1.29×104, and 2.12×104 km2, accounting for 15.3, 15.2, 13.7, and 22.5% of the total area of the grasslands in the Hexi Corridor, respectively. The highly suitable areas of O. asiaticus, C. abbreviatus, and A. rhodopa were mainly distributed in the east-central part of Zhangye City, the western part of Wuwei City, and the western and southern part of Jinchang City, with areas of 0.35×104, 0.29×104, and 0.20×104 km2, accounting for 3.7, 3, and 2.2% of the grassland area, respectively. The high habitat of M. palpalis was mainly distributed in the southeast of Jiuquan City, the west, middle, and east of Zhangye City, the west of Wuwei City, and the west and south of Jinchang City, with an area of 0.32×104 km2, accounting for 3.4% of the grassland area. In the 2030s, the range of O. asiaticus, C. abbreviatus, A. rhodopa, and M. palpalis was predicted to decrease.

The thermodynamic phase behavior of charged polymers is a crucial property underlying their role in biology and various industrial applications. A complete understanding of the phase behaviors of such polymer solutions remains challenging due to the multi-component nature of the system and the delicate interplay among various factors, including the translational entropy of each component, excluded volume interactions, chain connectivity, electrostatic interactions, and other specific interactions. In this work, the phase behavior of partially charged, ion-containing polymers in polar solvents is studied by further developing a liquid-state (LS) theory with local short-range interactions. This work is based on the LS theory developed for fully-charged polyelectrolyte solutions. Specific interactions between charged groups of the polymer and counterions, between neutral segments of the polymer, and between charged segments of the polymer are incorporated into the LS theory by an extra Helmholtz free energy from the perturbed-chain statistical associating fluid theory (PC-SAFT). The influence of the sequence structure of the partially charged polymer is modeled by the number of connections between bonded segments. The effects of chain length, charge fraction, counterion valency, and specific short-range interactions are explored. A computational App for salt-free polymer solutions is developed and presented, which allows easy computation of the binodal curve and critical point by specifying values for the relevant model parameters.

Short-range Internet of Things (IoT) sensor nodes operating at 2.4 GHz need to provide ubiquitous wireless sensor networks (WSNs) with energy-efficient, wide-range output power (POUT) and fully integrated on a single chip for wireless body area networks (WBANs) and wireless personal area networks (WPANs) using low-power Bluetooth (BLE) and Zigbee standards. The proposed fully integrated transmitter (TX) utilizes a digitally controllable current-mode class-D (CMCD) power amplifier (PA) with a second harmonic distortion (HD2) suppression to reduce VCO pulling in an integrated system while meeting harmonic limit regulations. The CMCD PA is divided into 7-bit slices that can be reconfigured between differential and single-ended topologies. Duty cycle distortion compensation is performed for HD2 suppression, and an HD2 rejection filter and a modified C-L-C low-pass filter (LPF) reduce HD2 further. Implemented in a 28 nm CMOS process, the TX achieves a wide POUT range of from 12.1 to -31 dBm and provides a maximum efficiency of 39.8% while consuming 41.1 mW at 12.1 dBm POUT. The calibrated HD2 level is -82.2 dBc at 9.93 dBm POUT, resulting in a transmitter figure of merit (TX_FoM) of -97.52 dB. Higher order harmonic levels remain below -41.2 dBm even at 12.1 dBm POUT, meeting regulatory requirements.

The influence of short term water absorption on the mechanical properties of halloysite nanotubes-multi layer graphene reinforced polyester hybrid nanocomposites has been investigated. The addition of nano-fillers significantly increased the flexural strength; tensile strength and impact strength in dry and wet conditions. After short term water exposure; the maximum microhardness; tensile; flexural and impact toughness values were observed at 0.1 wt% MLG. The microhardness increased up to 50.3%; tensile strength increased up to 40% and flexural strength increased up to 44%. Compared to dry samples; the fracture toughness and surface roughness of all types of produced nanocomposites were increased that may be attributed to plasticization effect. Scanning electron microscopy revealed that the main failure mechanism is caused by the weakening of nano-filler-matrix interface induced by water absorption. It was further observed that synergistic effects were not effective at concentration of 0.1 wt% to produce considerable improvement in mechanical properties of produced hybrid nanocomposites.

The gastrointestinal tract is colonized by trillions of different microorganisms, named the gut microbiota, which is key to degrade undigested food such as dietary fibers. The fermentation of these food components leads to the production of short-chain fatty acids (SCFA) acetate, propionate, and butyrate, which exploit several beneficial roles for the host’s health. Their production and absorption happen in different ways in the human intestine and depend on the type of dietary fiber reaching the gut and the microorganisms involved in the fermentation. The supplementation of SCFAs, mostly butyrate, in treating gastrointestinal, metabolic, cardiovascular, and gut-brain-related diseases has been reported in the medical literature. This review aims to give an overview of the production and absorption dynamics of acetate, propionate, and butyrate in the human gut, with a final focus on the role played by these SCFAs on gastrointestinal and metabolic health and the present therapeutic implications.

The classical Rotational Isomeric State (RIS) model, originally proposed by Flory, has been used to rationalize a wide range of physicochemical properties of neutral polymers. However, many weak polyelectrolytes of interest are able to regulate their charge depending on the conformational state of the bonds. Recently, it has been shown that the RIS model can be coupled with the Site Binding (SB) model, for which the ionizable sites can adopt two states: protonated or deprotonated. The resulting combined scheme, the SBRIS model, allows to analyse ionization and conformational equilibria on the same foot. In the present work this approach is extended to include pH-dependent electrostatic Long Range (LR) interactions, ubiquitous in weak polyelectrolytes at moderate and low ionic strengths. With this aim the original LR interactions are taken into account by defining effective Short Range (SR) and pH-dependent parameters, such as effective microscopic protonation constants and rotational bond energies. The new parameters are systematically calculated using variational methods. The machinery of statistical mechanics for SR interactions, including the powerful and fast transfer matrix methods, can then be applied. The resulting technique, to which we will refer as Local Effective Interaction Parameters (LEIP) method, is illustrated with a minimal model of a flexible linear polyelectrolyte containing only one type of rotating bonds. LEIP reproduces very well the pH dependence of the degree of protonation and bond probabilities obtained by semi-grand canonical Monte Carlo simulations, where LR interactions are taken explicitly into account. The reduction in the computational time in several orders of magnitude suggests that the LEIP technique could be useful in a range of areas involving linear weak polyelectrolytes, allowing direct fitting of the relevant physical parameters to the experimental quantities.

Landiolol is an ultra-short-acting, selective ß1- adrenergic receptor blocker that was originally approved by Japan for the treatment of intraoperative tachyarrhythmias. It has gained attention for its use in the management of tachyarrhythmias and perioperative tachycardia, especially atrial fibrillation for both cardiac and non-cardiac surgeries. It can be the ideal agent for heart rate control due to its high β1‐selectivity, the potent negative chronotropic effect, a limited negative inotropic potential, and an ultrashort elimination half‐life (around 4 min); moreover, it may have a potential therapeutic effect for sepsis and pediatric patients. Landiolol seems to be superior to other short‐acting and selective beta‐blockers such as esmolol. This review aims to provide a comprehensive overview of landiolol, a new ultra-short-acting ß1 selective antagonist, including its pharmacology, clinical applications, efficacy, safety profile, and future directions in research and clinical data.

After a long a glorious history, marked by the first direct proofs of neutrino existence and of the mixing between the first and third neutrino generations, the reactor antineutrino experiments are still well alive and will continue to give important contributions to the development of elementary particle physics and astrophysics. In parallel to the SBL experiments, that will be dedicated mainly to the search for sterile neutrinos, a new kind of experiments will start playing an important role: the medium baseline reactor experiments, aiming to study the neutrino mass ordering. The first example of this kind, the liquid scintillator JUNO experiment, characterized by a very high mass and unprecedented energy resolution, will soon start data taking in China. Its main aspects are discussed here, together with its potentialities for what concerns the mass ordering investigation and also the other issues that can be studied with this detector, spanning from the accurate oscillation parameter determination, to the study of solar neutrinos, geoneutrinos, atmospheric neutrinos and neutrinos emitted by supernovas and to the search for signals of potential Lorentz invariance violation.

The association between normal-range triglycerides and diabetes mortality remains unclear. This cohort study aimed to elucidate this relationship by examining 19,010 US adult participants with fasting serum triglycerides below 150 mg/dL. Cox proportional hazards models were employed to estimate mortality hazard ratios (HRs) and 95% confidence intervals (CIs). Participants were followed up for a mean of 15.3 years, during which 342 diabetes deaths were recorded. A 1-natural-log-unit increase in triglycerides was associated with a 57% higher risk of diabetes mortality (adjusted HR, 1.57; 95% CI, 1.04–2.38). Comparable results were obtained when triglycerides were analyzed in quartiles. Receiver operating characteristic curve analysis identified an optimal triglyceride cutoff of 94.5 mg/dL for diabetes mortality; individuals with triglyceride levels above this threshold faced a greater risk of diabetes mortality (adjusted HR, 1.43; 95% CI, 1.12–1.83). Further investigation revealed a positive association between normal triglyceride levels and all-cause mortality, though no association was observed between normal triglycerides and mortality from hypertension or cardiovascular disease. In conclusion, elevated triglycerides within the normal range were associated with an increased risk of diabetes mortality. Individuals with triglyceride levels of 95 mg/dL or higher may require vigilant monitoring for diabetes and its associated complications.

The use of haptic devices in rehabilitation of impaired limbs has become rather popular, given the proven effectiveness in promoting recovery. In a standard framework, such devices are used in rehabilitation centers, where patients interact with virtual tasks, presented on a screen. To track their sessions, kinematic/dynamic parameters or performance scores are recorded. However, as Internet access is now available at almost every home, and in order to reduce the hospitalization time of the patient, the idea of doing rehabilitation at home is gaining wide consent. Medical care programs can be synchronized with the home rehabilitation device; patient data can be sent to the central server that could redirect to the therapist laptop (tele-healthcare). The controversial issue is that the recorded data do not actually represent the clinical conditions of the patients according to the medical assessment scales, forcing them to frequently undergo clinical tests at the hospital. To respond to this demand, we propose the use of a bilateral master/slave haptic system that could allow the clinician, who interacts with the master, to assess remotely and in real time the clinical conditions of the patient that uses the home rehabilitation device as the slave. In this paper, we describe a proof of concept to highlight the main issues of such an application, limited to one degree of freedom, and to the measure of the stiffness and range of motion of the hand.

The intense motion of a ship can greatly impacts the comfort of crew members and the safety of the vessel. Therefore, accurately estimating and predicting ship attitudes has become an important issue. This paper introduces the latest development in functional deep learning model called DeepOnet. It takes wave height as input and ship motion as output, using a cause-to-result prediction approach. The modeling data used in this study is sourced from publicly available experimental data from the Iowa Institute of Hydraulic Research. Firstly, parameters system tuning was conducted for the neural network's hyperparameters to determine the appropriate combination of parameters. Secondly, the DeepOnet model for wave height and multi-degree-of-freedom motion was established, and the influence of increasing time steps on prediction accuracy was examined. Finally, a comparison was made between the DeepOnet model and the classical time series model LSTM. It was found that the DeepOnet model had a 10-fold improvement in accuracy for roll and heave attitudes. Moreover, as the forecast duration increased, the advantage of DeepOnet showed a trend of strengthening. As a functional prediction model, DeepOnet provides a new promising tool for very short-term prediction of ship motion.

Physical roots, exemplifications and consequences of periodic and aperiodic ordering (represented by Fibonacci series) in biological systems are discussed. The role and physical and biological roots of symmetry and asymmetry appearing in biological patterns is addressed. Generalization of the Curie-Neumann Principle as applied to biological objects is presented, briefly summarized as: “asymmetry is what creates a biological phenomenon”. The “up-bottom approach” and “bottom up” approaches to the explanation of symmetry in organisms are presented in detail. The “up-bottom approach”, implies that the symmetry of the biological structure follows the symmetry of media in which this structure is functioning; the “bottom-up” approach, in turn, adopt that the symmetry of biological structures emerges from the symmetry of molecules constituting the structure. A diversity of mathematical measures applicable for quantification of ordering in biological patterns is introduced. The continuous, Shannon and Voronoi measures of symmetry/ordering and their application to biology objects are addressed. The fine structure of the notion of “ordering” is discussed. Informational/algorithmic roots of ordering inherent for the biological systems are considered. Ordered/symmetrical patterns provide economy of biological information, necessary for algorithmic description of a biological entity. Application of the Landauer principle bridging physics and theory of information to the biological systems is discussed.

In this paper, a novel strategy is adopted in a degradation model to affect the implied lifetime distribution. The multiplicative degradation model is utilized as a postulate in the model. It will be established that the implied lifetime distribution forms a classical mixture model. In this mixture model, time-to-failure is lying with some probabilities between two first passage times of the degradation process to reach two specified levels. Stochastic comparisons in the model under a change in the probabilities are studied. Several examples are provided to highlight the applicability of the results in the cases when typical degradation models are candidate.

The structural evolution and phase composition of multi-block thermoplastic polyurethanes, with different nature of the soft segments based on poly(butylene adipate) (PBA), were analyzed during in-situ thermal treatments. A combination of synchrotron small- and wide-angle X-ray scattering, differential scanning calorimetry, thermogravimetric analysis, and FTIR spectroscopy was used to determine the influence of macrodiol nature and crystallization conditions on the polymorphic behavior of PBA. Using a new synthesis scheme, a relatively high degree of crystallinity for urethane blocks was achieved, which depends on the diisocyanate type in the structure of the soft segment. The hard segment domains impose geometrical constraints on PBA, thereby altering its crystallization process compared to the neat oligomer. Thus, crystallization after annealing at a low temperature (80 °C) is fast, predominantly yielding a metastable β-phase. When heated to 180 °C, which is higher than the hard-segment melting temperature, a phase-separated structure is observed. Subsequent crystallization is slower, favoring the formation of the stable α-PBA modification. The phase separation can be observed even after the hard block melting. A notably slow crystallization from an isotropic melt was documented after the disruption of phase separation at 230 °C.

The measurement range of a conventional current sensor is narrow because it is used with signals relative to the rated values of the measurement range from a voltage-type device. Consequently, multiple current sensors must be used in accordance with the measurement range. To address this problem, this paper proposes a new current sensor with a clamp-shaped part for low current measurement and a simple straight structure for high current measurement. The output signals of the proposed current sensor are amplified with a Hall element using the magnetic force of a rectangular air gap inside the clamp. To verify the characteristics of the proposed current sensor, a current was applied to an external load, and the value determined by the current sensor noted. Then, electromagnetic field analysis was performed through current sensor modeling and the results obtained compared to the actual sensor results. The proposed sensor had a 1% linearity in the output signals and exhibited dynamic characteristics over a wide current range.

In this contribution to the Festschrift for Prof. Remo Ruffini, we investigated a formulation of quantum gravity based on the Wheeler-DeWitt (WDW) equation combined with the classical concepts of the branch-cut cosmology, which contemplates as a new scenario for the origin of the Universe, a smooth transition region between the contraction phase, prior to the primordial singularity, and the subsequent expansion phase. Through the introduction of an energy-dependent effective potential, which describes the space-time curvature associated with the embedding geometry and its coupling with the cosmological constant and matter fields, solutions of the WDW equation for the wave function of the Universe are obtained. The Lagrangian density is quantized through the standard procedure of raising the Hamiltonian, the helix-like complex scale factor of branched cosmology as well as the corresponding conjugate momentum to the category of quantum operators. As a novelty, ambiguities in the ordering of the quantum operators are overcome with the introduction of a set of ordering factors α, whose values are restricted to the integers α=[0,1,2], since non-integers have no physical meaning, allowing this way a broader class of solutions for the wave function of the Universe. As another novelty, additional energy-dependent parametrizations are considered, more specifically, in addition to a branched universe filled with underlying background vacuum energy, matter and radiation, in order to make contact with standard model calculations, we additionally supplement the formulation with baryon matter, dark matter and quintessence contributions. As an additional novelty, the boundary conditions for the wave function of the Universe are imposed by assuming the Bekenstein criterion. Our results indicate this way, as a novelty conclusion, the consistency of a topological quantum leap, or alternatively a quantum tunneling, for the transition region of the early universe in contrast to the classic branched cosmology view of a smooth transition.

Properties of the Voronoi tessellations arising from the random 2D distribution points are reported. We applied the procedure of dividing the sides of Voronoi cells into equal or random parts to Voronoi diagrams generated by a set of randomly placed on the plane points. The dividing points were then used to construct the following Voronoi diagram. Repeating this procedure led to a surprising effect of positional ordering of Voronoi cells, reminiscent of the formation of lamellae and spherulites in linear semi-crystalline polymers and metallic glasses. Thus, we can conclude, that by applying even a simple set of rules to a random set of seeds we introduce order into an initially disordered system. At the same time, the Voronoi entropy showed a tendency to values typical for completely random patterns and did not distinguish the short-range ordering. The Voronoi entropy and the continuous measure of symmetry of the patterns demonstrated the distinct asymptotic behavior, while approaching the close saturation values with the increase of the number of the iteration steps. Voronoi entropy grew, with the number of iterations, whereas the continuous measure of symmetry of the same patterns demonstrated the opposite asymptotic behavior. The Voronoi entropy is not an unambiguous measure of order in the 2D patterns. The more symmetrical patterns may demonstrate the higher values of the Voronoi entropy.

Although 4Ce4YSZ has high corrosion resistance, it faces challenges concerning sinterability and ionic conductivity. Therefore, we studied destabilization behavior caused by corrosion and oxygen vacancy ordering according to ZnO doping. The powders of (4Ce4YSZ)1-x(ZnO)x (x=0.5, 1, 2, 4 mol%) were synthesized through the sol-gel method. With the addition of ZnO, the cubic phase increased, and secondary phases were not observed. The (111) peak showed a higher angle shift in ZnO-doped 4Ce4YSZ compared to 4Ce4YSZ, and TEM-SAED revealed a reduction in the spacing of the (011)t plane, suggesting lattice contraction due to the substitution of the smaller Zn2+ (60 Å) for Zr4+ (84 Å) in the lattice. The local atomic structure analysis was conducted using EXAFS to investigate the oxygen vacancy ordering behavior. Zr K-edge Fourier-transform data revealed a decrease in the Zr-O1 peak intensity with an increasing amount o ZnO doping, indicating an increase in oxygen vacancies. The Zr-O1 peak position shifted to the right, leading to an increase in the Zr-O1 interatomic distance. In the Y K-edge Fourier-transform data, the Y-O1 peak intensity did not decrease, and there was little variation in the Y-O1 interatomic distance. These results suggest that the oxygen vacancies formed due to ZnO doping are located in the neighboring oxygen shell of Zn, rather than in the neighboring oxygen shells of Y and Zr. Impedance measurements were conducted to measure the conductivity, and as the amount of ZnO doping increased, the total conductivity increased, while the activation energy decreased. The increase in oxygen vacancies by ZnO doping contributed to the enhancement of conductivity and it is considered that these created oxygen vacancies did not interact with Zn2+ and did not form defect associations. Fluoride-based molten salts were introduced to the specimens to assess corrosion behavior in a molten salt environment. Yttrium depletion layers (YDLs) were formed on the surfaces of all specimens due to the leaching of yttrium. However, Ce remained relatively stable at the interface according to EDS line scans, suggesting a reduction in the phase transformation (cubic, tetragonal to monoclinic) typically associated with yttrium leaching in YSZ.

Acute and chronic graft versus host disease (a/cGVHD) are major complications of allogeneic stem cell transplantation and a frequent cause of non relapse-mortality. The treatment of a/cGVHD consists of steroid administration at full dose. In the case of aGVHD, around 60 % of patients with grade III/IV fails to respond (steroid-resistant, SR), requiring a second line therapy. Extracorporeal photopheresis (ECP) represents a good option for second line treatment, leading to multiorgan response in several patients. Here, we have evaluated the performances of a cytofluorimetric quality control of the first ECP procedure in 29 patients with severe SR aGVHD who underwent ECP. The quality control represents a check control of in vitro cell apoptosis/death induction in collected and irradiated CD3+ cells by ECP. Our analysis shows that in more than 70 % quality controls a relevant apoptotosis/death of CD3+ cells was observed after cell irradiation, as compared to non-irradiated controls. Albeit observed in a small patients’ series, the occurrence of relevant in vitro effect after ECP relates to less procedures and/or to a better survival on ECP. Age, disease, gender, aGVHD grade and time from transplant to the first ECP had not impact on ECP efficacy in this patients’ series.

In this paper, the technical aspects of a multi-lidar instrument, the long-range WindScanner system, will be presented accompanied by an overview of the results from several field campaigns. The long-range WindScanner system consists of three spatially separated coherent Doppler scanning lidars and a remote master computer that coordinates them. The lidars were carefully engineered to perform arbitrary and time controlled scanning trajectories. Their wireless coordination via the master computer allows achieving and maintaining lidars’ synchronization within ten milliseconds. As a whole, the long-range WindScanner system can measure an entire wind field by emitting and directing three laser beams to intersect, and then by moving the beam intersection over the points of interest. The long-range WindScanner system was developed to tackle the need for high-quality observations of wind fields from scales of modern wind turbine and wind farms. It has been in operation since 2013.

The European Union Water Framework Directive (2000/60/EC; WFD) aims to achieve a good ecological and chemical status of all bodies of surface water by 2027. The development of an integrated guidance on surface water chemical monitoring (e.g. WFD Guidance Document No. 7/19) has been transferred into national German law (Ordinance for the Protection of Surface Waters, OGewV). For the majority of compounds, this act requires a monthly sampling frequency to assess the chemical water quality status of a surface water body. To evaluate the representativeness of the sampling strategy under the OGewV, high-frequency online monitoring data is investigated under different sampling scenarios and compared with current, monthly grab sampling strategy. About 23 million data points were analyzed for this study, three chemical parameters (dissolved oxygen, nitrate-nitrogen, chloride concentration) and discharge data were selected from four catchment of different sizes ranging from 51391 km² to 84 km² (Elbe, Vereinigte Mulde, Neiße and two stations at Lockwitzbach). In this paper we proposed short-term online-monitoring (STOM) as a sampling alternative. STOM considers the placement of online sensors over a limited duration and return interval. In general we: (I) compare the results of conventional grab sampling with STOM, (II) investigate the different performance of STOM and grab sampling using discharge data as proxy for analyzing event-mobilized pollutants and (III) investigate the related uncertainties and costs of both sampling methods. Results show, that STOM outperforms grab sampling for parameters where minimum/maximum concentrations are required by law as the probability to catch a single extreme value is higher with STOM. Furthermore, parameters showing a pronounced diurnal pattern, like dissolved oxygen, are also captured considerably better. The performance of STOM showed no substantial improvements for parameters with small concentration variability, as nitrogen-nitrate The analysis of discharge events as a proxy parameter for event-mobilized pollutants proved that the probability of capturing samples during events is significantly increased by STOM.

Environmental responsibility and economic benefits have promoted the development of closed-loop supply chain (CLSC), and shortages and channels are considered to be two important issues in CLSC. This paper explores ordering and channel decisions in CLSC with new and differentiated remanufactured products, and considers the price and sales effort-dependent demands, as well as the proportion of emergency orders determined by emergency order costs and backorder losses, and establishes an integrated and decentralized CLSC game models. We introduce a stochastic sales effort, which affects two types of products. Numerical results show that sales effort and the order quantity of new and remanufactured products exhibit concave and convex functions, respectively. Wherein, the upper limit of sales effort has a greater impact on supply chain decisions. High sales efforts can serve as a means of coordinating dispersed supply chains. Moreover, in different cases, decisions of integrated channel are better than those of decentralized channel. Finally, whether the supply chain adopts an emergency order strategy depends on the relative cost of emergency orders and out of stock costs. According to the research in this article, some management insights are also provided.

Background and Objectives Neurofibromatosis 1 (NF1 MIM # 162200), also known as von Recklinghausen disease, is among the most common autosomal dominantly transmitted disorders characterized mainly by neurocutaneous manifestations such as café au lait spots, intertriginous freckling, various types of neurofibromas (cutaneous neurofibromas or plexiform tumors), neurological manifestations, and bone abnormalities. It occurs with an incidence of 1:3000–1:4000 cases. Cone-rod dystrophies belong to the large group of retinal dystrophies, a highly heterogeneous group of disorders clinically manifested mainly by damage to cone and rod cells and have a broad spectrum of clinical manifestations. Many genes are involved in their etiology, with more than 100 currently identified, including the CRX gene responsible for the autosomal dominant form of cone-rod dystrophy (ad CORD). Materials and Methods: The authors present an intriguing case of a patient diagnosed with Neurofibromatosis type 1 (NF1) as an infant and ocular involvement (myopia and astigmatism onset at age 15), which yielded a surprising molecular testing result. Results: Molecular DNA analysis identified a rare occurrence of two mutational variants, including a pathogenic variant in the NF1 gene, c.3871-2A, and a likely pathogenic variant in the CRX gene c.119G>A. Conclusions: The authors present this case to highlight the surprises offered by molecular testing in a condition where the diagnosis is usually based on clinical criteria, thus providing patients with competent genetic advice.

The statistical analysis of impact of the top 50 solar flares of X-class (1997-2023) on the global seismic activity, as well as on the earthquake preparation zones located in illuminated part of the globe and in the area of 5000 km radius around the subsolar point was carried out. It is shown by a method of epoch superposition that for all cases the increase of seismicity is observed, especially in the region around the subsolar point (up to 38%) during 10 days after the solar flare in comparison with preceding 10 days. The case study of aftershock sequence of strong M=9.1 earthquake (Su-matra-Andaman Islands, 26.12.2004) after the solar flare of X7.2 class (20.01.2005) demonstrated that the number of aftershocks with magnitude M≥2.5 increases more than 20 times after the solar flare with a delay of 7 days. For the case of the Darfield earthquake (M=7.1, 04.09.2010, New Zealand) it was shown that strong solar flares of class X and M probably triggered two strong aftershocks (M>6) with the same delay of 6 days on the Port Hills fault, which is the most sensitive to external electromagnetic impact from point of view of the fault electrical conductivity and orientation. Based on the obtained results the possible application of natural electromagnetic triggering of earthquakes is discussed for a short-term earthquake prediction using confidently recorded strong external electromagnetic triggering impacts on the specific earthquake preparation zones, as well as ionospheric perturbations due to aerosol emission from the earthquake sources recorded by satellites.

The main objective of this paper is to find a close link between the adaptive level of significance, presented here, and the sample size. We, statisticians, know of the inconsistency, or paradox, in the current classical tests of significance that are based on p-value statistics that is compared to the canonical significance levels (10%, 5% and 1%): "Raise the sample to reject the null hypothesis" is the recommendation of some ill-advised scientists! This paper will show that it is possible to eliminate this problem of significance tests. The Bayesian Lindley's paradox – "increase the sample to accept the hypothesis" – also disappears. Obviously, we present here only the beginning of a possible prominent research. The intention is to extend its use to more complex applications such as survival analysis, reliability tests and other areas. The main tools used here are the Bayes Factor and the extended Neyman-Pearson Lemma.

The recent development of the Internet has boosted the extension of online food services by enabling people to search, compare prices and conveniently access these services. Because, only with an online system, small and medium-sized economic actors can compete with established food company such as McD and KFC. Therefore, it is important to know consumer behavior patterns from online food ordering systems for developing marketing strategies. Exploring online consumer behavior provides a better understanding of consumer segmentation in food demand and thus helps to lay the foundation for developing an online marketing strategy for competitive advantage. The purpose of this study is to finding factors affecting attitude towards online food retailing. This study uses a quantitative approach by involving respondents who often use online food ordering systems (Go-Food) applications in Bandung. The results showed that hedonic motivation and price saving orientation had no significant effect on behavior intention toward OFD services by Go-Food, while time saving orientation, prior online purchase experience and convenience motivation had a significant effect on behavior intention toward OFD services.

A close-range photogrammetric approach and its implementation using a CNC device and a macro camera are proposed. A tailored image acquisition approach is proposed that is implemented using this device. To increase reconstruction robustness and accuracy, the key point features detected in the acquired images are tracked across multiple views from multiple viewpoints at multiple distances. This approach reduces spurious correspondences and, as a result, the estimation accuracy of calibration parameters is increased and reconstruction errors are reduced. Qualitative and quantitative evaluation demonstrate the efficacy and accuracy of the proposed approach, which exhibits micrometre resolution and low implementation cost.

This study introduces a comparative analysis of two deep learning (multilayer perceptron neural networks (MLP-NN) and the long short term memory networks (LSTMN)) models for transit travel time prediction. The two models were trained and tested using one-year worth of data for a bus route in Blacksburg, Virginia. In this study, the travel time was predicted between each two successive stations to all the model to be extended to include bus dwell times. Additionally, two additional models were developed for each category (MLP of LSTM): one for only segments including controlled intersections (controlled segments) and another for segments with no control devices along them (uncontrolled segments). The results show that the LSTM models outperform the MLP models with a RMSE of 17.69 sec compared to 18.81 sec. When splitting the data into controlled and uncontrolled segments, the RMSE values reduced to 17.33 sec for the controlled segments and 4.28 sec for the uncontrolled segments when applying the LSTM model. Whereas, the RMSE values were 19.39 sec for the controlled segments and 4.67 sec for the uncontrolled segments when applying the MLP model. These results demonstrate that the uncertainty in traffic conditions introduced by traffic control devices has a significant impact on travel time predictions. Nonetheless, the results demonstrate that the LSTMN is a promising tool that can has the ability to account for the temporal correlation within the data. The developed models are also promising tools for reasonable travel time predictions in transit applications.

The effect of the melt cooling rate on the atomic ordering of austenite and, as a consequence, on the martensitic transformation of a nonstoichiometric alloy of the Ni-Mn-In system has been studied. In-situ TEM observations revealed differences in the mechanism of phase transformations of the alloy subjected to different cooling conditions. It is shown that during quenching a high density of antiphase boundaries (APB) is formed and the alloy is in the austenite-martensitic (10M and 14M) state up to a temperature of 120K. In a slowly cooled alloy, a lower APB density is observed, and a two-stage transformation L21/B2 → 10M → 14M occurs in the range of 150–120 K.

Depression and anxiety are prevalent, persistent and difficult to treat industrialized world mental health problems. These disorders negatively modify an individual’s life perspective through brain function imbalances, notably in the amygdala and hippocampus, and are primarily treated with pharmaceuticals and psychotherapy. Nevertheless, these mental health issues have only increased in the number of individuals affected and the intensity of their suffering—especially as a result of COVID-19 restrictions and fears. An approach to alleviating depression and anxiety in relation to researchers self-identifying as experiencing burnout is promising. Enhancing resilience, the approach considers depression and anxiety as consequences of the particular method people adopt in ordering their memories, and focuses on narrative development. The method encourages accepting of different perspectives as unique and necessary in creating safe protection from research burnout. Moving from an identification of personal character to prompting plot development of memory, the method promotes resilience by encouraging thoughtful reconsideration of the negative assessments by participants of their circumstances that can lead to depression and anxiety. The method of ordering and group members’ feedback are inspected, including during the period of COVID-19 restrictions, and conclusions are offered regarding further research to encourage burnout resilience to diminish depression and anxiety.

Novel tetragonal matrix Ba0.5Gd0.5-xNaxF2.5-x, where x = 0.05, doped by Yb3+, Ho3+, Er3+, was synthesized by molten salt synthesis (MSS) from nitrate flux. XRD data show that tetragonal phase with a = 4.122(1) Å, c = 17.672(1) Å is stable in argon atmosphere up to 960 °C. Luminescence spectra recorded in 500-900 nm and 1050-1700 nm upon 974 nm pumping demonstrated the characteristic luminescence at 1550 nm (4I13/2 → 4I15/2) for Er3+ and 1150 nm (5I6 → 5I8) for Ho3+. The relative thermal sensitivity (Sr) at 296-316 K were 0.3 %*K-1 and 5.5%*К-1 in shortwave infrared (SWIR) and visible range, respectively. Synthesized luminophores can be used as dual-range optical temperature sensors, which simultaneously operating in visible and SWIR ranges.

In this review, we summarize the current state-of-the-art in the utilization of close-range sensing in forest monitoring. We include technologies, such as terrestrial and mobile laser scanning as well as unmanned aerial vehicles, which are mainly used for collecting detailed information from single trees, forest patches or small forested landscapes. Based on the current published scientific literature, the capacity to characterize changes in forest ecosystems using close-range sensing has clearly been recognized. Forest growth has been the most investigated cause for changes and terrestrial laser scanner the most applied sensor for capturing forest structural changes. Unmanned aerial vehicles, on the other hand, have been used to acquire aerial imagery for detecting tree height growth and monitoring forest health. Mobile laser scanning has not yet been used in forest change monitoring except for a few early investigations. Considering the length of the forest growth process, investigated time spans have been rather short, less than 10 years. In addition, data from only two time points have been used in many of the studies, which has further been limiting the capability of understanding dynamics related to forest growth. In general, method development and quantification of changes have been the main interests so far regardless of the driver of change. This shows that the close-range remote sensing community has just started to explore the time dimension and its possibilities for forest characterization.

In daily living environments, an individual’s state influences spatial perception. The current study, based on Attention Restoration Theory, aimed to explore differences in the health utility of nature according to individual differences in spatial perception. Cognitive mapping and the Perceived Restorativeness Scale (PRS) were used to assess spatial perception ranges and the restorative effect of the environment. Two spatial perceptual groups were defined: one describing only the internal area of a green space, and another illustrating the external area of this green space on a larger scale. The former had higher overall PRS, Being Away, Fascination, and Compatibility scores. The latter had higher scores only on the Coherence subscale. These results illustrate that frequency of nature visits and time spent traveling to do so differently influence the two groups’ attentional restoration, which has great implications for landscape planning in highly stressful urban environments.

Commercial buildings are a significant consumer of energy worldwide. Logistics facilities, and specifically warehouses, are a common building type yet under-researched in the demand-side energy forecasting literature. Warehouses have an idiosyncratic profile when compared to other commercial and industrial buildings with a significant reliance on a small number of energy systems. As such, warehouse owners and operators are increasingly entering in to energy performance contracts with energy service companies (ESCOs) to minimise environmental impact, reduce costs, and improve competitiveness. ESCOs and warehouse owners and operators require accurate forecasts of their energy consumption so that precautionary and mitigation measures can be taken. This paper explores the performance of three machine learning models (Support Vector Regression (SVR), Random Forest, and Extreme Gradient Boosting (XGBoost)), three deep learning models (Recurrent Neural Networks (RNN), Long Short-Term Memory (LSTM), and Gated Recurrent Unit (GRU)), and a classical time series model, Autoregressive Integrated Moving Average (ARIMA) for predicting daily energy consumption. The dataset comprises 8,040 records generated over an 11-month period from January to November 2020 from a non-refrigerated logistics facility located in Ireland. The grid search method was used to identify the best configurations for each model. The proposed XGBoost models outperform other models for both very short load forecasting (VSTLF) and short term load forecasting (STLF); the ARIMA model performed the worst.

Universe created with the fundamental laws of science. Nature is lazy and needs to form with the least possible to be perfect. A natural pattern, such as pinecones, sunflowers, pineapples, and cacti, has a double spiral structure. Once we look at these plants' centers, we will see the seeds line up in spirals shape. The number of spirals whirling in each direction will give us the Fibonacci numbers. We can give more examples representing these natural patterns; however, one example is unique and remarkable. The similarities between spiral galaxies- Milky Way and hurricanes. Are they similar in every property or just in shape and rotational movements? What are the similarities between them? This short review article will try to find these questions' answers by reviewing some literature articles. The first part of this article gave some information about hurricanes and galaxies. The second of this article focused on the comparison between hurricanes and galaxies. Finally, we will conclude the article with our remarks.

Hepatocellular carcinoma (HCC) is a heterogeneous malignancy with complex carcinogenesis. Although there has been significant progress in the treatment of HCC over the past decades, drug resistance to chemotherapy remains a major obstacle in its successful management. In this study we were able to reduce chemoresistance in cisplatin-resistant HepG2 cells by either silencing the expression of transglutaminase type 2 (TG2) using siRNA or by pre-treatment of cells with the TG2 enzyme inhibitor cystamine. Further analysis revealed that, whereas the full-length TG2 isoform (TG2-L) was almost completely cytoplasmic in its distribution, the majority of the short TG2 isoform (TG2-S) was membrane-associated in both parental and chemoresistant HepG2 cells. Following induction of cisplatin toxicity in non-chemoresistant parental cells, TG2-S together with cisplatin quickly relocated to the cytosolic fraction. Conversely, no cytosolic relocalisation of TG2-S or nuclear accumulation cisplatin was observed following identical treatment of chemoresistant cells, where TG2-S remained predominantly membrane-associated. This suggests that deficient subcellular relocalisation of TG2-S from membranous structures into the cytoplasm may limit the apoptic response to cisplatin toxicity in chemoresistant cells. Structural analysis of TG2 revealed the presence of binding motifs for interaction of TG-S with the membrane scaffold protein LC3/LC3 homologue that could contribute to a novel mechanism of chemotherapeutic resistance in HepG2 cells.

This paper investigates portfolio optimization methodologies and short-term investment strate-gies in the context of the cryptocurrency market, focusing on ten major cryptocurrencies from January 2020 to November 2023. We employ high frequency data and utilize the Kurtosis Mini-mization methodology, alongside other optimization strategies, to construct and evaluate port-folios under different rebalancing frequencies. The empirical analysis reveals that cryptocurren-cies exhibit significant volatility, skewness, and kurtosis, necessitating sophisticated portfolio management techniques. We find that the Kurtosis Minimization methodology consistently outperforms other optimization strategies, delivering optimal returns to investors, particularly in shorter-term investment horizons. We demonstrate the diversification benefits of integrating cryptocurrencies into multi-asset portfolios and emphasize the importance of regular portfolio rebalancing in the volatile cryptocurrency market. Our findings offer insights for portfolio man-agers and investors seeking to optimize their investment outcomes in the cryptocurrency market, highlighting the importance of risk management, diversification, and dynamic portfolio man-agement strategies.

The Residential and Industrial zones as is, rely heavily, if not exclusively, on Hydrocarbons. Hydrocarbon thermal machinery such as Spark Ignition-Compression Ignition engines, Gasoline-Diesel generators, Coal-Lignite gasifiers, residential diesel-powered heating systems, Pyrolysis units and so on, are commonly met all around the planet. Such technology practically oxidizes Hydrocarbons to produce either heat, steam or useful mechanical work depending on the application, though energy losses are not, by any means, insignificant. Advanced material processing is an industrial sector who’s energy demand is significant and it is important for the general public to come to terms with the fact that by implementing Hydrogen technology to power such plant while at the same time improving the energy equilibrium of houses(advanced materials), communities would be taking major steps towards Climate Change effects debilitation. The downside of Hydrocarbon thermochemical exploitation can be described by the limited resources-reserves and the gaseous pollutant emissions (CO2, CO, NOx, SOx). In recent years, the Industrial zone as a whole has began taking a turn towards Electrification without having established the necessary infrastructure to support such a transition. Indicatively, at current rate of production, dead Lithium-Ion batteries are projected to reach as high as 11,000 metric tons by 2030, yet there is no recycling scheme in place, not to mention the prospect of that number rising even more, given the recent e-mobility trend. As it pertains to Electrification, such powertrains-machinery require electricity and a battery. Electricity production is mainly achieved through Coal-Lignite gasification, Batteries require metals, among others, for manufacturing, meaning that up-on mining, local water resources are contaminated, another very important ‘aspect’ of Lithium(per say) mining is that child labor is often associated with such processes, a truly despicable act. All of the above paint a crystal-clear picture as to how ‘environmentally friendly’ reckless-rushed Electrification really is. Climate Change is up-on us and it’s effects on the planet are obvious, the most important of which is glacier melting due to rising of the global Temperature. The COVID-19 crisis is a sign of what could come from glacier melting could as ice contains potentially harmful-toxic to humans, biological entities that are sure to be introduced to the general public if we were to continue exploiting mineral resources. Purpose of this paper is to provide a general overview of the technology around Hydrogen.

Impaired wound healing is a significant financial and medical burden. The synthesis and deposition of extracellular matrix (ECM) in a new wound is a dynamic process that is constantly changing and adapting to the biochemical and biomechanical signaling from the extracellular microenvironments of the wound. This drives either a regenerative or fibrotic and scar-forming healing outcome. Disruptions in ECM deposition, structure, and composition lead to impaired healing in diseased states, such as in diabetes. Valid measures of the principal determinants of successful ECM deposition include bacterial contamination, tissue perfusion, and mechanical injury and strain. These measures are used by wound-care providers to intervene upon the healing wound to steer healing toward a more functional phenotype with improved structural integrity and healing outcomes and to prevent adverse wound developments.In this review, we discuss bioengineering advances in non-invasive detection of biologic and physiologic factors of the healing wound, visualizing and modeling the ECM, and computational tools to efficiently evaluate the complex data acquired from the wounds to prognosticate healing outcomes and intervene effectively. We focus on bioelectronics and biologic interfaces of the sensors and actuators for real time biosensing and actuation. We also discuss high-resolution, advanced imaging techniques, which go beyond traditional confocal and fluorescence microscopy to visualize microscopic details of the composition of the matrix, linearity of collagen, and live tracking of components within the ECM. Computational modeling of the matrix, including partial differential equation datasets as well as machine learning models that can serve as powerful tools for physicians to guide their decision-making process are discussed.

Increasing groundwater levels (GWL) may become one of the most serious issues for Odessa City, Ukraine. This study investigated the spatial distribution characteristics and multifractal scaling behaviour of groundwater level/depth fluctuation for a Quaternary aquifer in Odessa City using a geostatistical approach and a Multifractal Detrended Fluctuation Analysis (MF-DFA). These two methods were applied to monthly GWL fluctuation time series from 1970 to 2020 to monitor 72 hydrogeological wells situated in different parts of Odessa City. The spatial distribution of GWL revealed an overall trend of decline and recovery from 1970 to 2020 in the study area, except for most of the southern region, where a persistent recovery of groundwater depth was observed. The MF-DFA results suggest that the dynamics of GWL fluctuations have multifractal characteristics in the Odessa City area. In addition, both long-range correlation and fat-tail probability distribution contribute to multifractality. However, long-range correlations among fluctuations made a major contribution to the observed multifractality of the GWL fluctuations time series. The generalized Hurst exponent shows a wide range of change (0.20 < h(q) < 2.85), indicating the sensitivity of GWL fluctuations to changes in small scale factors and large-scale factors. Regarding the long range correlations of GWL depth, the Hurst exponents (q = 2) demonstrated the positive persistence of groundwater depth recovery in the southern region and the persistence of groundwater depth variation in the other regions of the study area. The dynamic changes in GWL depth in the Odessa City area may be affected by both natural structural and anthropogenic factors.

This work focuses on analyzing acoustic emission (AE) signals as a means to predict failure in structures. Two main approaches are considered: (i) long-range correlation analysis using both the Hurst (H) and the Detrended Fluctuation Analysis (DFA) exponents, and (ii) natural time domain (NT) analysis. These methodologies are applied to the data collected from two application examples: a glass fiber reinforced polymeric plate and a spaghetti bridge model, where both structures were subjected to increasing loads until collapse. A traditional (AE) signal analysis is also performed to reference the study of the other methods. Results indicate that the proposed methods yield a reliable indication of failure in the studied structures.

Data independent acquisition - mass spectrometry (DIA-MS) is becoming widely utilised for robust and accurate quantification of samples in quantitative proteomics. Here, we describe the systematic evaluation of the effects of DIA precursor mass range on total protein identification and quantification. We show that a narrow mass range of precursors (~250 m/z) for DIA-MS enables a higher number of protein identifications. Subsequent application of DIA with narrow precursor range (from 400 to 650 m/z) on Arabidopsis sample with spike-in of known proteins identified 34.7% more proteins than in conventional DIA (cDIA) with a wide precursor range of 400-1200 m/z. When combining several DIA-MS analyses with narrow precursor ranges (i.e., 400-650, 650-900 and 900-1200 m/z), we were able to quantify 10,099 protein groups with a median coefficient of variation of <6%. These findings represent a 59.4% increase in the number of proteins quantified than with cDIA analysis. This is particularly important for low abundance proteins, as exemplified by the 6-protein mix spike-in. In cDIA only 5 out of the 6-protein mix were quantified while our approach allowed accurate quantitation of all six proteins.

This paper uses the numerical results of surveys sent to Huelva’s (Andalusia, Spain) households to determine the degree of knowledge they have about the urban water cycle, needs, values, and attitudes regarding water in an intermediary city with low water stress. In previous research, we achieved three different households’ clusters. The first one grouped households with high knowledge of the integral water cycle and a positive attitude to smart devices at home. The second cluster described households with low knowledge of the integral water cycle and high sensitivity to price. The third one showed average knowledge and predisposition to have a closer relationship with the water company. This paper continues with this research line, applying Classification and Regression Trees (CART) to determine which hierarchy of variables/factors/ independent components obtained from the surveys are the decisive ones to predict the range of household water consumption in Huelva. Positive attitudes towards improved cleaning habits for personal or household purposes are the highest hierarchy component to predict the water consumption range. Second in the hierarchy, the variable Knowledge Global Score about the integral urban water cycle, associated with water literacy, also contributes to predicting the water consumption range. Together with the three clusters obtained previously, these results will allow us to design water demand management strategies (WDM) fit for purpose that enable Huelva’s households to use water more efficiently.

Precision and accuracy estimation is an important index used to reflect the measurement performance and quality of a measurement system. To reveal the significance and connotations of the precision and accuracy estimation index of a close-range photogrammetry system, several common precision and accuracy estimation methods used in close-range photogrammetry are explained from a theoretical perspective, and the mechanism of the internal coincidence precision estimation and the external coincidence accuracy estimation are deduced, respectively. Through detailed experimental design and testing, the validity and reliability of the proposed precision and accuracy estimation methods are verified, which provides strong evidence for the quality control, optimisation, and evaluation of the measurement results from a close-range photogrammetry system. At the same time, it has significance for the further development of precision and accuracy estimation analysis of close-range photogrammetry systems.

We have shown in previous work that the equivalence of the Heisenberg and Schrödinger pictures of quantum mechanics requires the use of the Born and Jordan quantization rules. In the present work we give further evidence that the Born--Jordan rule is the correct quantization scheme for quantum mechanics. For this purpose we use correct short-time approximations to the action functional, initially due to Makri and Miller, and show that these lead to the desired quantization of the classical Hamiltonian.

Selected by in vitro techniques (SELEX, cell-SELEX), aptamers are strands of DNA or RNA molecules able to bind a wide range of targets, from small molecules to live cells, and even tissues, with high affinity and specificity. Due to their efficient targeting ability, aptamers are extensively used in different fields of applications. For example, they ensure high performance as cancer-related markers or in recognizing cancer cells. Actually, they represent a promising way for early diagnosis (biosensors) and to deliver imaging agents and drugs, in both cancer imaging and therapy (therapeutic aptamers). Aptamer-based biosensors (aptasensors) have attracted particular attention over the last decades, so as the possibility of using aptamers in disease therapy in substitution of monoclonal antibodies. The paper briefly reviews the most recent literature on this topic, both concerning the advances in biomedical applications and in the development of electrical aptasensors. The investigation concerning the bioelectronics features of aptamers, to be implemented in the development of electrical nanobiosensors, is also reviewed. To this aim, some recent results of a theoretical/computational framework for modelling the electrical properties of biomolecules (Proteotronics) are reported.

Two clear-air over-the-horizon propagation mechanisms affecting Automatic Identification System (AIS) detection range are considered. Comparison results are presented between the path loss due to tropospheric ducting and path loss due to tropospheric scattering (troposcatter) for the AIS frequencies. The calculations are based on the well-known parabolic equation approximation to the wave equation, in which a simple troposcatter formula is incorporated. In most studied cases the ducting assures significantly greater reduction of path loss than troposcatter even when the AIS frequencies are not well trapped in the duct. Emphasis is placed on elevated trapping layers and some features that may make ducting propagation less favorable in terms of increasing the AIS detection range are discussed.

Water plays a crucial role in maintaining plant functionality and drives many ecophysiological processes. The distribution of water resources is in a continuous change due to global warming affecting the productivity of ecosystems around the globe, but there is a lack of non-destructive methods capable of continuous monitoring of plant and leaf water content that would help us in understanding the consequences of the redistribution of water. We studied the utilization of novel small hyperspectral sensors in the 1350-2450 nm spectral range in non-destructive estimation of leaf water content in laboratory and field conditions. We found that the sensors captured up to 96% of the variation in equivalent water thickness (EWT, g/m²) and up to 90% of the variation in relative water content (RWC). These laboratory findings were supported by field measurements, where repeated leaf spectra measurements were in good agreement (R²=0.79) with a time-lagged change of tree xylem diameter. Further tests were done with an indoor plant (Dracaena marginate Lem.) by continuously measuring leaf spectra while drought conditions developed, which revealed detailed diurnal dynamics of leaf water content. We conclude that close-range hyperspectral spectroscopy can provide a novel tool for continuous measurement of leaf water content at the single leaf level and help us to better understand plant responses to varying environmental conditions.

The paper deals with the sensing system utilizing the standard single-mode optical fiber as a distributed sensor for detection, localization and classification of the mechanical vibrations that can be generated by various events such as walking or running people, moving cars, trains, etc. Sensor system capabilities were tested both in the laboratory and in the real situation with 88 km telecom optical link and the results are presented.

We demonstrate high quality (intrinsic Q factor ~2.8×106) racetrack microresonators fabricated on lithium niobate (LN) thin film with a free spectral range (FSR) of ~86.38 pm. By integrating microelectrodes alongside the two straight arms of the racetrack resonator, the resonance wavelength around the 1550 nm can be red shifted by 92 pm when the electric voltage is raised from -100 V to 100 V. The microresonators of the tuning range spanning over a full FSR is fabricated using photolithography assisted chemo-mechanical etching (photolithography assisted chemo-mechanical etching, PLACE).

Global optimization is an imperative development of local optimization because there are many problems in artificial intelligence and machine learning requires highly acute solutions over entire domain. There are many methods to resolve the global optimization, which can be classified into three groups such as analytic methods (purely mathematical methods), probabilistic methods, and heuristic methods. Especially, heuristic methods like particle swarm optimization and ant bee colony attract researchers because their effective and practical techniques which are easy to be implemented by computer programming languages. However, these heuristic methods are lacking in theoretical mathematical fundamental. Fortunately, minima distribution establishes a strict mathematical relationship between optimized target function and its global minima. In this research, I try to study minima distribution and apply it into explaining convergence and convergence speed of optimization algorithms. Especially, weak conditions of convergence and monotonicity within minima distribution are drawn so as to be appropriate to practical optimization methods.

Quantum cryptography is the field of cryptography that explores the quantum properties of matter. Its aim is to develop primitives beyond the reach of classical cryptography or to improve on existing classical implementations. Although much of the work in this field has been dedicated to quantum key distribution (QKD), some important steps were made towards the study and development of quantum oblivious transfer (QOT). It is possible to draw a comparison between the application structure of both QKD and QOT primitives. Just as QKD protocols allow quantum-safe communication, QOT protocols allow quantum-safe computation. However, the conditions under which QOT is actually quantum-safe have been subject to a great amount of scrutiny and study. In this review article, we survey the work developed around the concept of oblivious transfer in the area of theoretical quantum cryptography, with an emphasis on some proposed protocols and their security requirements. We review the impossibility results that daunt this primitive and discuss several quantum security models under which it is possible to prove QOT security.

Prediction and early detection of atrial fibrillation (AF) remain a permanent challenge in everyday practice. Timely identification of an increased risk for AF episodes (which are frequently asymptomatic) is essential in the primary and secondary prevention of cardioembolic events. One of the noninvasive modalities of AF prediction is represented by the electrocardiographic P-wave analysis. This includes the study and diagnosis of interatrial conduction block (Bachmann`s bundle block). Bayés’ Syndrome (named after its first descriptor) denotes the association between interatrial conduction defect and supraventricular arrhythmias (mainly AF) predisposing to cardioembolic events. Our short review presents an update of the most important data concerning this syndrome: brief history, main ECG features, pathophysiological background and clinical implications.

Aim: To analyze a single center's experience with Short Bowel Syndrome/ Chronic Intestinal Failure (SBS/CIF) in adult patients treated with Home Parenteral Nutrition (HPN). Materials and methods: In the last thirty years, 13 patients with SBS/CIF were included in an HPN program. Results: Between 1992 and 2023, 13 patients were included in an HPN program. The primary underlying pathology was acute mesenteric ischemia. The median age of the starting HPN was 44 years old. Most are submitted to several surgeries of extensive intestinal resection with posterior intestinal reconstruction. Five of the 13 patients have died while on HPN for a median of 42 months. The causes of death HPN-related were catheter sepsis, endocarditis with cardiac failure, or hepatic failure. One patient died due to underlying pathology: pelvic abscesses and bleeding related to radiotherapy. Eight patients remain alive with a median time of HPN of 173 months. During the HPN support, the most frequent complications were venous catheter infection and venous territory thrombosis. None of the eight patients alive have hepatic failure. Two patients recently started teduglutide, with good tolerance, and need reduction of HPN support. All these eight patients have a satisfactory quality of life (parenteral support needs range between five to two nutrition bags per week). Conclusion: HPN remains the gold standard of SBS/CIF treatment, although Teduglutide may reduce HPN needs and HPN complications and provide a better quality of life. An HPN multidisciplinary healthcare group support is essential to ensure these patients' survival and quality of life. Keywords Short bowel Syndrome, Chronic Intestinal failure, Home Parenteral Nutrition, Teduglutide, Complications of Parenteral Support.

This study proposes a short- and medium-term electricity consumption prediction algorithm by combining the GRU model suitable for long-term forecasting and the Prophet model suitable for seasonality and event handling. (1) Manufacturing Company B's Electricity consumption data and meteorological data in Naju, Jeollanam-do, South Korea are collected and preprocessed. (2) The preprocessed data proposes the Prophet model in the first step for seasonality and event handling prediction. (3) In the second step, seven multivariate data are experimented with GRU. Specifically, the seven multivariate data consist of six meteorological data and the residuals between the predicted data from the proposed Prophet model in Step 1 and the observed data. These are utilized to predict electricity consumption at 15-minute intervals. (4) Electricity consumption is predicted for short-term (2 days and 7 days) and medium-term (15 days and 30 days) scenarios. The experimental results demonstrate that the proposed method outperforms the conventional Prophet model by more than 23 times and the modified GRU model by more than 2 times in terms of MAPE.

The urgency of the COVID19 pandemic caused a surge in related scientific literature. This surge made the manual exploration of scientific articles time-consuming and inefficient. Therefore, a range of exploratory search applications have been created to facilitate access to the available literature. In this survey, we give a short description of certain efforts in this direction and explore the different approaches that they used.

In this short note, the described step-by-step derivations of the industrial energy demand function from the production function framework and provided researchers with two specifications. Then we applied these theoretical specifications to the time series data as empirical analysis. We concluded that theories should be considered at the beginning of the empirical analyses but the data also should be allowed to speak freely. Hence, the main suggestion of this short note is that it would be a better strategy to consider the combination of theory-driven and data-driven approaches in the empirical analyses.

The correlation and comorbidity between depression and chronic pain have been observed for a long time. Generally, it is considered that the two conditions reinforce each other, whereas the causal relationship between them is not clear. However, some evidence suggested that chronic pain may reverse the progression of depression in some cases. This article presents a selective review of clinical and pharmacological relationship between depression and pain, and their interactions at neurochemical and neurobiological levels. In addition, we open a discussion on a recent case report of repeated success of using short but continuous pain (SCP) during meditation as the only treatment for depression, compared to initial success but no remission with other conventional antidepressants on the same patient. Together this review proposes an updated model for depression and its various treatments that is based on synaptic and system homeostasis. More importantly, it suggests that SCP may benefit depression recovery through its properties that are different from either acute or chronic pain and represents a novel research area that has been largely neglected to date.

Polarisation analysis in the mid-infrared fingerprint region was carried out on thin (∼1μm) Si and SiO2 films evaporated via glancing angle deposition (GLAD) method at 70∘ to the normal. Synchrotron-based infrared microspectroscopic measurements were carried out on the Infrared Microspectroscopy (IRM) beamline at Australian Synchrotron. Specific absorption bands, particularly Si-O-Si stretching vibration, was found to follow the angular dependence of ∼cos2θ, consistent with the absorption anisotropy. This unexpected anisotropy stems from the enhanced absorption in nano-crevices, which have orientation following the cos2θ angular dependence as revealed by Fourier transforming the image of the surface of 3D columnar films and numerical modeling of light field enhancement by sub-wavelength nano-crevices.

Phenotyping is the task of measuring plant attributes for analyzing the current state of the plant. In agriculture, phenotyping can be used to make decisions concerning the management of crops, such as the watering policy, or whether to spray for a certain pest. Currently, large scale phenotyping in fields is typically done using manual labor, which is a costly, low throughput process. Researchers often advocate the use of automated systems for phenotyping, relying on the use of sensors for making measurements. The recent rise of low cost, yet reasonably accurate, RGB-D sensors has opened the way for using these sensors in field phenotyping applications. In this paper, we investigate the applicability of 4 different RGB-D sensors for this task. We conduct an outdoor experiment, measuring plant attribute in various distances and light conditions. Our results show that modern RGB-D sensors, in particular, the Intel D435 sensor, provides a viable tool for close range phenotyping tasks in fields.

The saturation properties of symmetric and asymmetric nuclear matter have been computed using the finite range simple effective interaction having Yukawa form-factor. The results of higher order derivatives of the energy per particle and the symmetry energy computed at saturation, namely, Q0, Ksym, Kτ, Qsym, are compared with the corresponding range of values extracted from studies involving theory, experiment and astrophysical observations. The ability of the equations of state computed with this simple effective interaction in predicting the threshold mass for prompt collapse in binary neutron star merger and gravitational redshift have been examined in terms of the compactness of the neutron star and the incompressibility at the central density of the maximum mass star. The correlations existing between neutron star properties with the nuclear matter saturation properties have been analyzed and compared with the predictions of other model calculations.

Reconfigurable chiral metasurfaces with dynamic polarization manipulation capability are highly required in optical integrated systems. In this paper, we simultaneously realized giant and large-range switchable asymmetric transmission (AT) and circular conversion dichroism (CCD) in a vanadium dioxide (VO2) based metasurface. The AT and CCD of the insulator VO2 based metasurface reach 0.95 and 0.92, respectively. Utilizing the insulator-to-metallic phase transition of VO2, the AT and CCD could be continuously switched to near zero. Furthermore, the physics mechanism of the giant and switchable AT and CCD are analyzed. The proposed metasurface with large-range switchable AT and CCD is promising in the applications of biochemistry detection, chiral imaging and biosensing.

Labelling techniques such as electron paramagnetic resonance spectroscopy and single-molecule fluorescence resonance energy transfer, allow access to distances in the range of tens of angstroms, corresponding to the size of proteins and small to medium-sized protein complexes. Such measurements do not require long-range ordering and are therefore applicable to systems with partial disorder. Data from spin-label-based measurements can be processed into distance distributions that provide information about the extent of such disorder. Using such information in modelling presents several challenges, including a small number of restraints, the influence of the label itself on the measured distance and distribution width, and balancing the fitting quality of the long-range restraints with the fitting quality of other restraint subsets. Starting with general considerations about integrative and hybrid structural modelling, this review provides an overview of recent approaches to these problems and identifies where further progress is needed.

Bipolar plates significantly contribute in the development of the polymer electrolyte membrane (PEM) fuel cells technology due to their ability to produce high electrical conductivity based on type of materials used. Mismatching of inappropriate materials and manufacture may lead to the inferior performance of PEM fuel cells. Hence, material development was determined crucial to balance the overall performance of PEM fuels including the mechanical properties and electrical conductivity of the materials. Studies on conductive polymer composites (CPCs) offered filler orientation as an alternative method to enhance the overall performance of bipolar plate. Filler orientations permit an excellent conductivity network formation while controlling the filler alignment based on required applications. This paper reviewed various studies of filler orientations including materials used and methods of manufacture of CPC materials for the effective development of bipolar plate.

Endurance triathlons impose substantial physiological stress, yet effects of short-course formats remain relatively unexplored. In this preliminary study, we assessed proteinuria and hydration levels in 27 well-trained triathletes (41.9 [7.4] years) who completed a sprint triathlon consisting of a 1500-m swim, 26-km cycle, and 8-km run. Urine samples were collected before and after the race. The results showed an increase in cases of post-race proteinuria from four to nine (p=0.03). Also, one case of urobilinuria and ketoacidosis was observed after the race. Pre-race glucosuria, which was present in nine cases, decreased to three cases post-race. Although hematuria cases decreased from six to two (p=0.13), pre-race leukocyturia (found in two cases) resolved post-race. There was a significant increase in urine specific gravity (from 1.018 to 1.023, p=0.03), indicating dehydration. In conclusion, short-course triathlons were found to induce post-race proteinuria, urobilinuria, and dehydration without exacerbating pre-race glucosuria, hematuria, or leukocyturia. These preliminary findings contribute to our understanding of medical guidelines for sprint triathlons, an area of endurance sports that has received limited research attention. Further investigation, both mechanistic and longitudinal, is warranted in this regard.

This short communication reports on the initial results of a much larger, ongoing project, the aim of which is to investigate the question: could the skin microbiome, just like the gut microbiome, play a role in sports recovery and performance – and if so, could this role be as significant a one as that played by the gut microbiome? 17 high performance college athletes addressed their skin microbiome by minimizing contact with synthetic chemicals and by using topical skin supplements, shown previously to significantly increase skin microbiome biodiversity, for two weeks after training. 76% said their skin softness improved, 35% said their muscle stiffness and recovery after sport improved, 12% said their sleep quality improved, and 100% said they would be likely to use skin supplements again. Future work will use hundreds of athletes.

Long-range interactions are relevant for a large variety of quantum systems in quantum optics and condensed matter physics. In particular, the control of quantum-optical platforms promises to gain deep insights in quantum-critical properties induced by the long-range nature of interactions. From a theoretical perspective, long-range interactions are notoriously complicated to treat. Here, we give an overview of recent advancements to investigate quantum magnets with long-range interactions focusing on two techniques based on Monte Carlo integration. First, the method of perturbative continuous unitary transformations where classical Monte Carlo integration is applied within the embedding scheme of white graphs. This linked-cluster expansion allows to extract high-order series expansions of energies and observables in the thermodynamic limit. Second, stochastic series expansion quantum Monte Carlo which enables calculations on large finite systems. Finite-size scaling can then be used to determine physical properties of the infinite system. In recent years, both techniques have been applied successfully to one- and two-dimensional quantum magnets involving long-range Ising, XY, and Heisenberg interactions on various bipartite and non-bipartite lattices. Here, we summarise the obtained quantum-critical properties including critical exponents for all these systems in a coherent way. Further, we review how long-range interactions are used to study quantum phase transitions above the upper critical dimension and the scaling techniques to extract these quantum critical properties from the numerical calculations.

Background: According to EWGSOP2, the diagnosis of sarcopenia is confirmed when in addition to low muscle strength, low muscle quantity or quality is present. Echo intensity (EI) determined by muscle ultrasound (US) has been proposed as an efficient method for the assessment of muscle quality. The effect of changing various US parameter settings on EI remains unclear. Therefore, the aim of this study was to assess the differences between EI values obtained by adjusting parameter settings over their entire range in a sample of middle-aged healthy subjects. Methods: Thirty-two repeated US scans of rectus femoris (RF) and rectus abdominis (RA) muscles were taken in eight men and three women with a portable Mindray M7 premium US machine, working in an Extended field-of-view, B-Mode setup, equipped with a linear 5.0-10.0 MHz transducer. The following US parameters and settings were fixed: gain 60dB, depth 6.5cm, and frequency 10 MHz. Readily adjustable parameters were dynamic range (DR), gray map (GM), line density, persistence, and IClear. A default setting DR65 was chosen as the reference setting. For each of the parameters, the settings of one single parameter of interest was changed over its entire range following a standardized protocol. The EI values were calculated using the open-source software ImageJ. Repeated measures analyses were performed to evaluate the effect of parameter settings on EI. Linear interpolation was used to determine non-significant ranges across a given parameter. Results: For the RF muscle, the EI values were significantly different across DR (p<0.001), GM (p<0.001), and IClear (p<0.001). Post hoc analysis confirmed the differences within these three settings. Echo intensity values within the range of DR55 to DR80 were not significantly different. For the RA muscle, the EI values were significantly different across DR (p=0.004) and GM (p=0.030). Post hoc pairwise comparisons revealed no significant difference with the default setting, except for DR150 (p=0.042). Conclusion: We showed that EI values differ across the DR and GM range, especially in the RF. We suggest using a DR setting within its midrange to minimize the effect of machine setting-dependent factors on EI values. These findings reconfirm the need for standardization of ultrasound echo intensity settings when applied for diagnostic purposes of muscle quality.

Magnetorheological (MR) fluids have been known to react to magnetic fields of sufficient magnitudes. While in the presence of the field the material develops a yield stress. The tunable property has made it attractive in e.g. semi-active damper applications in vibration control domain in particular. Within the context of a given application the fluids can be exploited in at least one of the fundamental operating modes of which the so-called gradient pinch mode has been least explored. Contrary to the other operating modes, the MR fluid volume in the flow channel is exposed to a non-uniform magnetic field in such a way that the Venturi-like contraction is developed in a flow channel solely by means of a solidified material in the regions near the walls rather than mechanically driven changes of the channel’s geometry. The pinch mode rheology of the material has made it a potential candidate in developing on a new category of MR valves. By convention, a pinch mode valve features a single flow channel with poles over which non-uniform magnetic field is induced. In this study the authors examine ways of extending the dynamic range of pinch mode valves by employing a number of such arrangements (stages) in series. To accomplish this, the authors developed a prototype of a multi-stage (three-stage) valve, and then compared its performance against that of a single-stage valve across a wide range of hydraulic and magnetic stimuli. To summarize, improvements in the pinch mode valve dynamic range are evident, however, at the same time it is hampered by the presence of serial air gaps in the flow channel.

Ion current rectification (ICR) is the ratio of ion current by forward bias to by backward bias and is a critical indicator of diode performance. In previous studies, many attempts have been continued to improve the performance of this ICR, but there is the intrinsic problem for geometric changes that induce ionic rectification due to their fabrication problem. Additionally, the high ICR could be achieved in the narrow salt concentration range only. Here, we propose a multi-layered bipolar ionic diode based on an asymmetric nanochannel network membrane (NCNM), which is realized by soft lithography and self-assembly of homogenous-sized nanoparticles. Owing to the freely changeable geometry based on soft lithography, the ICR performance can be explored according to the variation of microchannel shape. Interestingly, very stable ICR performance can be achieved using the multi-layered 3D configuration for the bipolar diode in a broad range of salt concentrations (0.1mM ~ 100 mM). This demonstrates the promising potential of multi-layered NCNM for applications in highly concentrated electrolytes, such as biosensors, desalination, or energy harvesting.

In time, osteoarthritis (OA) generates the misalignment of the affected joint structures. However, due to the nature of bipedal gait, OA in the lower limb can also cause pathological gait patterns, which can generate instability and falls, with great consequence, especially in the aged population. With goniometry used to evaluate the range of motion of joints (ROM), we wanted to evaluate how gender impacts gait dynamics in OA patients. For this study we have compared 106 OA patients (male=32, female=74) to age matched controls. All participants had their right leg as dominant. Video recording of normal gait was analysed with a digital goniometry tool phone application, and the knee’s ROM was measured in midstance and midswing of the gait. During midstance, significant extension and flexion of the knee excursion have been observed in both males and females. During midswing, knee OA presents more differences, whereas subjects with hip and knee OA present changes on the dominant knee. Midstance changes suggest that the knee’s joint degenerative changes can be linked to hip OA secondary changes. Midswing changes in lower limb OA suggest a connection to the activities of daily life. Gender differences generated by OA must furthermore be studied in both lower limbs so that the best therapeutic approach can be chosen.

We consider the problem of calibrating distance measurement of Light Detection and Ranging (lidar) sensor without using additional hardware, but rather exploiting assumptions on the environment surrounding the sensor during the calibration procedure. More specifically we consider the assumption of calibrating the sensor by placing it in an environment so that its measurements lie in a 2D plane that is parallel to the ground, and so that its measurements come from fixed objects that develop orthogonally w.r.t. the ground, so that they may be considered as fixed points in an inertial reference frame. We moreover consider the intuition that moving the distance sensor within this environment implies that its measurements should be such that the relative distances and angles among the fixed points above remain the same. We thus exploit this intuition to cast the sensor calibration problem as making its measurements comply with this assumption that “fixed features shall have fixed relative distances and angles”. The resulting calibration procedure does thus not need to use additional (typically expensive) equipment, nor deploying special hardware. As for the proposed estimation strategies, from a mathematical perspective we consider models that lead to analytically solvable equations, so to enable deployment in embedded systems. Besides proposing the estimators we moreover analyse their statistical performance both in simulation and with field tests, reporting thus the dependency of the MSE performance of the calibration procedure as a function of the sensor noise levels, and observing that in field tests the approach can lead to a ten-fold improvement in the accuracy of the raw measurements.

A botnical survey was conducted in Kaptai reserve forests under Rangamati district in Bangladesh to study the flora of Karnaphuli range from May 2015 to October 2018. The survey was accompanied by a collection of voucher specimens enumerates 464 plant species belonging to 334 genera under 117 families from the forest range. The survey has confirmed 31 threatened forest species from this area along with many near threatened plant species.

A botnical survey was conducted in Kaptai reserve forests under Rangamati district in Bangladesh to study the flora of Karnaphuli range from May 2015 to October 2018. The survey was accompanied by a collection of voucher specimens enumerates 464 plant species belonging to 334 genera under 117 families from the forest range. The survey has confirmed 31 threatened forest species from this area along with many near threatened plant species.

Fiber coupling efficiency is one of the key technical indicators of atmospheric laser communication, which directly affects the communication system BER. According to the optical fiber coupling efficiency model, the optical fiber coupling model under atmospheric slant link is established, and the relationship between wavelength, zenith angle, receiving aperture, altitude and coupling efficiency is studied through numerical simulation. Based on the principle of adaptive optics turbulence correction, the relationship between fiber coupling efficiency and adaptive optics order is established. A fast method for estimating the coupling efficiency based on Strehl ratio is proposed. According to the principle of laser communication system, the semi-physical simulation experimental system of atmospheric slant-range channel coupling efficiency is constructed, and the coupling efficiency test and analysis are completed.

In the quest to develop a more effective and representative electoral system that offers a higher global satisfaction while also resisting strategic voting, this paper introduces the Bipartisan/Range method. This electoral system operates in two separate rounds: a first round where voters rank candidates, and if no Condorcet winner emerges, a second round where voters score candidates within a small head set known as the bipartisan set. The proposed method takes inspiration from randomized Condorcet voting system, probably the most strategy-resistant Condorcet methods, but eliminates the non-determinism while improving efficiency in the case of paradoxes. By introducing an unpredictable second round spaced in time and prohibiting predictive surveys, voters face difficulties in anticipating paradoxes, and insincere votes carry inherent risks. Furthermore, the Bipartisan set's limited size mitigates the range voting problem of exaggerated votes. Thus, the method has the potential to be both efficient in reflecting voters' preferences and resistant to strategic voting, exceeding expectations from Arrow's theorem. The method's versatility allows for extensions to multiple candidates, enhancing its applicability across various electoral contexts. Additionally, we have developed BipartiVox, an online platform specifically designed to conduct elections using the Bipartisan/Range method, making it accessible to a wider audience. In conclusion, the Bipartisan/Range method represents a substantial contribution to the field of voting systems, providing a practical, strategy-resistant, and efficient alternative that aligns closely with genuine voter preferences.

This paper presents a novel dynamic camera parameter control method for position and posture estimation of highly miniaturized AR markers (micro AR markers) using a low cost general camera. The proposed method performs iterative calculation of the marker’s position and posture to converge them to specified accuracy with dynamically updating the camera’s zoom, focus and other parameter values based on the detected marker’s depth distances. For a 10 mm square micro AR marker, the proposed system demonstrated recognition accuracy of better than ±1.0% for depth distance and 2.5∘ for posture angle with a maximum recognition range of 1.0 m. In addition, the iterative calculation time was at most 0.7 seconds in an initial detection of the marker. These experimental results suggest that the proposed method and system can be applied to a robotic precise handling of small objects with low cost.

The evidence is presented for the long-range previtreous changes of two static properties: dielectric constant ( ) and its strong electric field related counterpart - the nonlinear dielectric effect (NDE). Notable is the evidence for the functional characterizations of (T) temperature changes by the ‘Mossotti Catastrophe’ formula, and NDE vs. T evolution by the relations resembling one developed for critical liquids. The analysis of dynamic properties based on the activation energy index excluded the Vogel-Fulcher-Tammann (VFT) relation as a validated tool for portraying the evolution of the primary relaxation time. Such a result questions the commonly applied ‘Stickel operator’ routine as the reliable tool for determining the dynamic crossover temperature. It is worth stressing that the strong electric field radically affects the distribution of relaxation times, the form of the evolution of the primary relaxation time as well as the fragility. Obtained results support the concept of a possible semi-continuous phase transition hidden below Tg. Studies were carried out in supercooled squalene, the material with extremely low electric conductivity, strongly elongated molecule, and vitally important for biology and medicine related issues.

Coffee is rich in caffeine (CF), chlorogenic acid (CGA) and phenolics. Differing types of coffee beverages and brewing procedures may result in differences in total phenolic contents (TPC) and biological activities. Inflammation and increases of platelet activation and aggregation can lead to thrombosis. We focused on determining the chemical composition, antioxidant activity and inhibitory effects on agonist-induced platelet aggregation and cyclooxygenase (COX) of coffee beverages in relation to their preparation method. We prepared instant coffee and brewed coffee beverages using drip, espresso and boiling techniques. Coffee extracts were assayed for their CF and CGA contents using HPLC, TPC using colourimetry, platelet aggregation with an aggregometer and COX activity using ELISA. The findings have shown all coffee extracts, except the decaffeinated types, contained nearly equal amounts of CF, CGA and TPC. Inhibitory effects of coffee extracts on platelet aggregation differed depending on the activation pathways induced by different agonists. All espresso, drip and boiled coffee extracts caused dose dependent inhibition of platelet aggregation induced by ADP, collagen, epinephrine, and arachidonic acid (ARA). The most marked inhibition was seen at low doses of collagen or ARA. Espresso and drip extracts inhibited collagen-induced platelet aggregation more than purified caffeine or CGA. Espresso, boiled and drip coffee extracts were also a more potent inhibitors of COX-1 and COX-2 than purified caffeine or CGA. We conclude that inhibition of platelet aggregation and COX-1 and COX-2 may contribute to anti-platelet and anti-inflammatory effects of espresso and drip coffee extracts.

This advanced scholarly article examines gender equality, human rights, and women’s rights in Uzbekistan, focusing on domestic violence and women's leadership. It explores their relevance to the region and their connections to global human rights discussions and social justice theories. The first section addresses the widespread problem of domestic violence in Central Asia, emphasizing the need for comprehensive understanding and effective measures. The second section assesses women's progress in achieving gender equality and leadership positions in the Uzbek workplace, identifying research gaps and the impact of recent reforms. The study employs an observational approach, integrating raw data and social media information to analyze gender equality and research. Findings and recommendations draw from global human rights debates and social justice theories, contributing to future research on gender issues in Central Asia. Overall, this article offers a comprehensive analysis, contextualizing the issues within local and global perspectives and contributing to the dialogue on gender equality in a cultural context.

This paper presents an overview of tomography and different tomographic imaging modalities. The goal of this paper is to provide an understanding of various imaging modalities; in particular, how the imaging is performed, working principles, and applications. It was not intended to provide the in-depth mathematical principles of these imaging modalities, rather this paper focuses on providing the knowledge in an easy-to-grasp manner for the readers' benefit. Imaging modalities are categorized based on the physics behind image generation. First, the paper explains the general tomography principle. Then explains Ultrasound Imaging, Electrical Impedance Tomography, Computed Tomography, Magnetic Resonance Imaging (MRI), Photoacoustic Tomography (PAT), and Positron Emission Tomography (PET). In the end, the paper provides the fundamentals and review of two relatively new imagining modalities, Diffuse Optical Tomography (DOT) and functional Near-infrared Spectroscopy (fNIRS).

The simplest possible structural transition that an electronic system can undergo is Wigner crystallization. The aim of this short review is to discuss the main aspects of three recent experimets on the one dimensional Wigner molecule, starting from scratch. To achieve this task, the Luttinger liquid theory of weakly and strongly interacting fermions will be shortly addressed, together with the basic properties of carbon nanotubes that are require. Then, the most relevant properties of Wigner molecules will be addressed, and finally the experiments will be described.

The mathematical structure underlying a sentence is made of two independent processing units in series. The conditional probability density function of sentence length (measured in words) recordable in the extended short–term memory (E–STM) buffer made of CF cells is Gaussian. The number of sentences that authors of Italian and English Literatures have written is compared to that theoretically available to them. The multiplicity factor α describes this comparison. α&gt;1 is more likely than α&lt;1 and often α≫1, therefore the same sentence pattern is reused many times. These texts are easier to read. Very few novels show α&lt;1. In these cases, there are enough diverse sentence patters to convey meaning, but most of them are not used. Texts are more difficult to read, as measured by a universal readability index GU. A mismatch index IM synthetically describes the process. α, GU. and IM increase with year of publication. Future work will concern other literatures – including ancient ones as Greek and Latin – to confirm what, in our opinion, is general feature of human mind.

We investigated the role of the human medio-temporal complex (hMT+) in the memory encoding and storage of a sequence of four coherently moving RDKs by applying repetitive transcranial magnetic stimulation (rTMS) during an early or late phase of the retention interval. Moreover, in a second experiment we also tested whether disrupting the functional integrity of hMT+ during the early phase impaired the precision of the encoded motion directions. Overall, results showed that both recognition accuracy and precision were worse in middle serial positions, suggesting the occurrence of primacy and recency effects. We found that rTMS delivered during the early (but not the late) phase of the retention interval was able to impair not only recognition of RDKs, but also the precision of the retained motion direction. However, such impairment occurred only for RDKs presented in middle positions along the presented sequence, where performance was already closer to chance level. Altogether these findings suggest an involvement of hMT+ in the memory encoding of visual motion direction. Given that both position sequence and rTMS modulated not only recognition but also precision of the stored information, these findings are in support of a model of visual short-term memory with a variable resolution of each stored item, consistent with the assigned amount of memory resources, and that such item-specific memory resolution is supported by the functional integrity of area hMT+.