The intelligent morphing wing structure has the characteristics of flexibility, large deformation and adaptive change, which are different from those of the conventional wing. The motion law of the variable-camber leading edge is analysed by the numerical simulation method based on kinematics theory to solve the problem of verifying the motion function and structural strength of the variable camber wing. The driving deformation and aerodynamic load simulation of the variable camber leading edge are realised by designing a follow-up load test apparatus. Based on the numerical simulation of the mechanical boundary, the motion trajectory of the upper and lower wing loading points was predicted, and a multi-point cooperative control system was developed. Multi-sensor iteration was used to ensure the loading accuracy of the test control. The test results show that the average error of the deflection angle is 4.59% in the variable camber leading edge motion test. In the variable camber leading edge strength test, the average error of applied load magnitude and direction is 0.54% and 0.24%, respectively.

Dynamic systems which underly controlled systems are expected to increase in complexity as robots, devices, and connected networks become more intelligent. While classical stable systems converge to a stable point (a sink), another type of stability is to consider a stable path rather than a single point. Such stable paths can be made of saddles which draw in trajectories from certain regions, and then push the trajectory toward the next saddle point. These are chains of saddles are called stable heteroclinic channels (SHCs), and can be used in robotic control to represent time sequences. While we have previously shown that each saddle is visualizable as a trajectory waypoint in phase space, how to increase the fidelity of the trajectory was unclear. In this paper, we hypothesized that the waypoints can be individually modified to locally vary fidelity. Specifically, we expected that increasing the saddle value (ratio of saddle eigenvalues) causes the trajectory to slow to more closely approach a particular saddle. Combined with other parameters that control speed and magnitude, a system expressed with an SHC can be modified locally, point by point, without disrupting the rest of the path, supporting their use in motion primitives. However, even more complex trajectory shape modifications are possible. While some combinations can enable a trajectory to better reach into corners, other combinations can rotate, distort and round the trajectory in the region of a corner. In our example, modifying select saddle values produced a 32% decrease in the trajectory error of a complex trajectory produced using this system. This is an effect not visible in previous 1D studies, that can lead to different learnable and tunable representations of dynamic systems.

In this work SiC-Ti3AlC2 and TiC-Ti3AlC2 composites produced by additive manufacturing are investigated. The fused granules fabrication (FGF) method as one of the material extrusion additive manufacturing (MEAM) technology is used to obtain composite samples. Composites with different ratios between components and different powder:polymer ratios are investigated. The technological features of the additive formation of composites are investigated, as well as their structure and properties. The optimal sintering temperature to form the best mechanical properties for both composites is 1300 °C. The composites have a regulatable porosity. Ti3AlC2 content, sintering temperature, and polymer content in the feedstock are the main parameters that regulates the porosity of FGF samples.

Methionine oxidation to the sulfoxide form (MSox) is a poorly understood post-translational modification of proteins associated with nonspecific chemical oxidation from reactive oxygen species (ROS) whose chemistries are linked to various disease pathologies including neurodegeneration. Emerging evidence shows MSox site occupancy is in some cases under enzymatic regulatory control mediating cellular signaling including phosphorylation and/or calcium signaling, raising questions as to the speciation and functional nature of MSox across the proteome. The 5XFAD lineage of the C57BL/6 mouse has well-defined Alzheimer’s and aging states. Using this model, we analyzed age, sex and disease dependent MSox speciation in mouse hippocampus. In addition, we explore chemical stability and statistical variance of oxidized peptide signals to understand needed power for MSox based proteome studies. Our results identify mitochondrial and glycolytic pathway targets with increases in MSox with age as well as neuroinflammatory targets accumulating MSox with AD in proteome studies of mouse hippocampus. Further, the paper establishes a foundation for reproducible and rigorous experimental MSox-omics appropriate for biological discovery novel target identification, and biomarker analysis in ROS and other oxidation linked diseases.

Lung cancer (LC) is the second most common cancer and the leading cause of cancer deaths in the U.S. Insulin therapy, a key treatment for managing Type 2 Diabetes Mellitus (T2DM), may increase LC risk. The impact of non-insulin antidiabetic drugs, particularly GLP-1 receptor agonists (GLP-1RAs), on LC risk is not well understood. This study evaluated LC risk in T2DM patients comparing seven non-insulin antidiabetic agents to insulin. Using the TriNetX Analytics platform, we analyzed de-identified electronic health records of 1,040,341 T2DM patients treated between 2005-2019, excluding those with prior antidiabetic use or LC diagnoses. We calculated hazard ratios and confidence intervals for LC risk and used propensity score matching to control for confounding factors. All non-insulin antidiabetic drugs, except alpha-glucosidase inhibitors, significantly reduced LC risk compared to insulin, with GLP-1RAs showing the greatest reduction (HR: 0.49, 95% CI: 0.41, 0.59). GLP-1RAs were consistently associated with lowered LC risk across all histological types, races, genders, and smoking statuses. These findings suggest that non-insulin antidiabetic drugs, particularly GLP-1RAs, may be preferable for managing T2DM while reducing LC risk.

Long noncoding RNAs (lncRNAs) are known to play key roles in breast cancers; however, detailed mechanistic studies of lncRNA function have not been conducted in large cohorts of breast cancer tumors, nor have inter-donor and inter-subtype variabilities been taken into consideration. Here we provide the first identification and annotation of the human BORG lncRNA gene. Using multiple tumor cohorts of human breast cancers, we show that while BORG expression is strongly induced in breast tumors as compared to normal breast tissues, the extent of BORG induction varies widely between breast cancer subtypes and even between different tumors within the same subtype. Elevated levels of BORG in breast tumors are associated with the acquisition of core cancer aggression pathways, including those associated with basal tumor and pluripotency phenotypes, and with epithelial-mesenchymal transition (EMT) programs. While a subset of BORG-associated pathways was present in high BORG-expressing tumors across all breast cancer subtypes, many were specific to triple-negative breast cancer tumors. Finally, we show that genes induced by heterologous expression of BORG in murine models of TNBC both in vitro and in vivo strongly overlap with those associated with high BORG levels in human TNBC tumors, indicating that human BORG is a novel driver of the highly aggressive basal TNBC tumor phenotype.

Candida (C.) infections represent a serious health risk for people affected by inflammatory bowel disease. An important fungal virulence factor is the capacity to form biofilms on the colonized surface of the host. This research study aimed to determine the effect of C. tropicalis and C. albicans co-infection on dextran sodium sulfate (DSS)-induced colitis in mice. Colitis severity was evaluated using histology and colonoscopy. Mice were mono-inoculated with C. albicans, C. tropicalis or co-challenged with both species. Mice were administered 3% DSS to induce acute colitis. Biofilm activity was assessed using (2-methoxy-4-nitro-5-sulfophenyl)-5-[(phenylamino)carbonyl] 2H-tetrazoliumhydroxide (XTT) assay. Abundance of C. albicans in the colon tissues was assessed by immunohistochemistry. Co-challenged mice showed decreased colitis severity compared to mono-inoculated mice. The XTT assay demonstrated a marked decrease of C. albicans biofilm production in a C. albicans culture incubated with C. tropicalis supernatant. Immunohistochemical staining showed that C. albicans was more abundant in the mucosa of C. albicans mono-inoculated mice compared to the co-inoculated group. These data indicate an antagonistic microbial interaction between the two Candida species, where C. tropicalis may produce molecules capable of limiting the ability of C. albicans to adhere to the host intestinal surface leading to a reduction in biofilm formation.

Hybrid reinforcement in a composite material (CM), in many situations, allows better govern material mechanical properties. Polymer matrix CM plate is reinforced with small particles and macro-fibers. Particles are oil shale ash (OSA) powder, macro-fibers – basalt fiber threads im-pregnated by matrix material. With the goal to find out elastic properties of the matrix- polymer with OSA, samples with its different concentrations were experimentally fabricated and their elastic properties were experimentally measured. Obtained data were used in numerical model-ling. Was observed polymer matrix composite slab, reinforced with OSA and three-dimensional (3D) basalt fiber fabric. Fabric are forming threads impregnated by matrix (polymer resin mixed with OSA particles). Damage accumulation in the stretched slab was modelled. Impregnated thread, in the modelling, is observed as a macro-fiber (MF) with averaged elastic properties. With the load increase MF in the material began to break. At first, appeared isolated single breaks. A probabilistic sequential MF rupture accumulation model was accepted and numerical-ly realized. The geometry of the reinforcing knitted fabric was modeled using the Leaf and Glaskin approach. In the knitted fabric highly, stressed MF cross-sections are observed as po-tential location where thread breakage can occur. If one thread breaks, the cross-sections of the adjacent threads experience the overload caused by this rupture. More overloaded crossection in the adjacent overloaded thread breaks and we obtain two adjacent broken MF designated as a defect with the size j=2. The probabilities of obtaining defect consisting of at least 2, 3, … j adjacent broken MF in the plate were calculated. The calculations continued until the rupture process becomes unstable (j→∞). The overstresses on adjacent threads in the CM were calculat-ed using the FEM three-dimensional numerical approach. Analytical and stochastic methods were used for the load-carrying capacity determination and different size defects accumulation in the hybrid composite material (HCM) plate. Also, was calculated the probability of the plate rupture.

Environmental estrogen pollution and estrogen effects on the female reproduction system are well-recognized scientifically. Among the estrogens, 17 β-estradiol is a priority in environmental estrogen pollution, and it is also a major contributor to estrogen which regulates the female reproduction system. 17 β-estradiol is carcinogen and has a tumor promotion effect relating to breast cancer, lung cancer and others. It also affects the psychological well-being such as depression, fatigue and others. Thus, a simple method of detection of 17 β-estradiol will be important for both environmental estrogen pollution and women’s health care. This study demonstrates a simple-use, cost effective 17 β-estradiol biosensor system which can be used for both environment and women’s health care applications. The bio-recognition mechanism is based on the influence of the redox couple, K₃Fe (CN) ₆/K₄Fe (CN) ₆ by the interaction between 17 β-estradiol antigen and its α-receptor (ER- α; α-estrogen antibody). The transduction mechanism is an electrochemical analytical technique, differential pulse voltammetry (DPV). The levels of 17 β-estradiol antigen studied was between 2.25 pg/mL to 2,250 pg/mL, Phosphate buffered saline (PBS), tap water from the Cleveland regional water district, and simulate urine were used as the test media covering the potential application areas for 17 β-estradiol detection. An interference study by testosterone which has a similar chemical structure and molecular weight as those of 17 β-estradiol was carried out, and this 17 β-estradiol biosensor showed excellent specificity without any interference by similar chemicals.

Composites, and especially carbon fiber reinforced plastics (CFRPs), are increasingly used in the automotive, aerospace, and aviation industries, and as a result, CFRP production has increased dramatically, leading to a corresponding increase of waste. Landfill and incineration of waste are likely to be restricted as a result of the legislation, thus highlighting the need for efficient recycling methods for CFRPs. However, the recycling of CFRP is very challenging, mainly due to the difficulty of removing the thermosetting matrix. This study reports a pre-screening of the solvolysis recycling process for CFRPs based on the mechanical properties of the recovered fibers. To this end, solvolysis tests were conducted on unidirectional CFRP samples under supercritical and subcritical conditions using acetone and water. The solvolysis tests were conducted for various conditions of temperature, pressure, and reaction time. The efficiency of the recycling processes has been evaluated through a morphological and a mechanical characterization of the recovered fibers. In most cases, the decomposition efficiency of the epoxy resin, measured in terms of mass, ranged between 90 and 100%. Moreover, the scanning electron microscopy images of the recovered fibers showed negligible traces of resin residues and no detectable signs of physical damage or any changes in morphology with regard to diameter. Finally, the single-fiber tension tests revealed that that the recovered fibers retained more than 61% of their initial Young's modulus and 70% of their tensile strength.

Monitoring the status and dynamics of desertification is one of the most important parts of combating desertification. In this study, 30m high-resolution information on land desertification and restoration in the HRB was extracted from the land cover database. The results indicate that land desertification coexists with land restoration in the HRB. At different periods, the area of land restoration is much larger than the area of land desertification in the HRB, and the HRB has been in a process of land restoration. Upstream of the HRB, there is a continuing trend of increasing land desertification associated with overgrazing in a context where climate change favors desertification reversal. In the middle and lower reaches, although both climate variability and human activities favor land desertification, the process of land desertification in the middle and lower reaches is still being reversed and land restoration dominates. The implementation of the Eco-Environmental Protection Project and desertification control measures, especially the EWDP, is contributing to the reversal of desertification in the middle and lower reaches of the HRB. However, the EWDP has indirectly led to the lowering of the water table in the middle reaches, resulting in local vegetation degradation. Therefore, there is therefore an urgent need to transform the economic structure of the middle reaches to cope with water scarcity and land desertification.

With the escalating proliferation of wind power plants, the imperative focus on system robustness and stability intensifies. Doubly fed induction machines (DFIMs) are extensively employed as generating units in land-based wind power plants due to their performance advantages. While the stator windings of DFIMs are directly connected to the power system, the three-phase rotor windings are connected via power converters, rendering these units highly vulnerable to voltage disturbances. During faults, voltage drops at the stator terminals lead to elevated voltages and currents on the rotor side due to electromagnetic coupling between stator and rotor, potentially damaging rotor insulation and costly power electronics. Historically, to safeguard equipment, wind power plants employing distributed energy resources such as DFIMs were disconnected from the grid during faults—an unsatisfactory solution given the burgeoning number of these installations. Consequently, grid operators and IEEE standard 2800 mandate fault ride-through or low voltage ride-through capabilities to maintain supply adequacy during recovery from disturbances and voltage fluctuations. This paper provides an overview of diverse techniques devised to enable fault ride-through for DFIMs. Additionally, it scrutinizes existing approaches in modeling DFIM behavior during faults and introduces an approach tailored specifically for DFIMs, detailing its comparative advantages and limitations vis-à-vis established models. A conclusion about the necessity for more precise models in comparison to the existing ones is provided.

Background: The effect of COVID-19 infection, versus the indirect effect of the pandemic on body composition remains unclear. This study investigates long-term changes in body composition in COVID–19 survivors compared to a contemporary control group. Method: This is a prospective study involving adults who had a pre-pandemic whole-body DXA scan (DXA#1) performed between 2017 and 2019. Participants were asked to return for a repeat whole-body DXA scan (DXA#2) after the pandemic. Detailed data were collected including medical and COVID history. Inflammation markers and fasting lipids were measured. For those participants who had a COVID-19 infection between the 2 DXAs, DXA#2 was acquired at least one year after COVID-19 infection. Results: Overall, 160 adults were enrolled; 32.5% females, 51.8% non-white, with mean age of 43.2 years. Half (n=80) of the participants had documented COVID infection between their 2 DXA scans (COVID+ group), and the other half never had COVID. COVID-negative participants had an increase in annualized trunk fat (g) [922.5 vs. 159.7; P=0.01], total fat (g) [1564.3 vs. 199.9; P=0.2], and LBM (g) [974.9 vs. -64.5; P=0.0002], when compared to COVID+ group. However, among the COVID+ group, no differences were seen in annualized trunk fat, total fat mass, or LBM between those with PASC and without (p>0.05). Conclusion: During the pandemic, both COVID-19-survivors and COVID-negative groups exhibited increases in weight, and total and trunk fat, likely associated with pandemic-linked lifestyle modifications. However, only COVID-19-survivors had a decline in lean body mass over the same period, regardless of PASC symptoms.

Cumulative evidence attests to the essential roles of commensal microbes in the physiology of the hosts. Although microbiome has been a major research subject since the time of Luis Pasteur and William Russell over 140 years ago, recent findings that certain intracellular bacteria contribute to the pathophysiology of healthy or diseased tissues have brought the field of microbiome to a new era of investigation. In particular, in the field of breast cancer research, breast-tumor resident bacteria are deemed to be the essential players of tumor initiation and progression. This is a resurrection of Russel’s bacterial cause of cancer theory abandoned over 100 years ago. This review will introduce some of the recent findings that exemplify the roles of breast tumor-resident microbes in breast carcinogenesis and metastasis and provide mechanistic explanations of these phenomena. Such information would be able to justify the utility of breast-tumor resident microbes as biomarkers for disease progression and therapeutic targets.

Interrelationships between traditional dental variables are becoming more evident in far reaching aspects of life such as psychosocial interaction, self-esteem, overall health and even occupational performance. This study compares quality of life (QoL) in postmenopausal women (PMW) with poor oral health (POH) with QoL in PMW with good oral health. 200 randomly recruited PMW received a dental evaluation and completed Utian Quality of Life Survey. The participants were divided into POH and healthy groups based on dental exam. Mean scores were calculated for each QoL item, domain and the overall summary score. For each of the four parameters for periodontitis diagnosis, periodontitis patients’ QoL outcomes were compared to those of healthy patients using T-test with threshold of significance at p<0.05. QoL in all fields measured were significantly poorer in the POH compared to the healthy patients, occupational (19.95±5.35vs. 27.56±6.13), health (18.02±8.23 vs. 26.59 ±6.45), emotional (15.68±10.22vs. 21.15±9.15), sexual (6.2±5.98vs. 10.02±5.35), and total score (60.21±25.85 vs. 84.26±22.35). This study finds that PMW with POH, report significantly poorer quality of life. Clinicians caring for PMW should be aware of that oral health impacts QoL and make appropriate referral decisions for patients’ dental care. Keywords: Quality of Life, Oral Health, Post-menopause, Women

Physics is imagined in the human brain which was formed in Darwin's Evolution by responding to certain threats for the survival of our evolutionary ancestors. The struggle to survive prevented us from wasting resources by paying attention to parts of reality that had no survival impact. These parts are of unknown scope and dimension. Can we negotiate this Darwin's barrier? As to reality within our reach, we suffer from imbalance between information absorption capacity and information analysis capacity which resulted in ignoring the overflow of information to match human capacity to make sense of it. Also James Clerk Maxwell suggested that reality has small scale phenomena beyond our human reach. Since we have no brain other than what Darwin equipped us with, this barrier looked unsurmountable. But lo and behold: much as we have built vehicles to carry us further than our biological legs, so we now build artificial intelligence machines that carry us beyond our Darwinist barrier. Physics may transform to building AI capability to ride on. This capability may require a more universal geometry and material representation to fit AI inference engines. Suggesting Depth Unbound Reality Architecture (DURA). AI connects raw data to its conclusion potential, by-passing a storied theory of nature. The objective of physics ahead may be to build theory-replacement AI machines.

The familiar stirred tank reactor poses an inherent challenge of variability. Some inflowing chemicals spend too little time in the reactor, and others stay too long, harming the uniformity of the end product. This issue can be addressed by replacing the continuous operation with a flow of individually treated fluid quanta. Ideally one would devise a universal fluid handling apparatus that can be adjusted to take care of all the needed chemical engineering unit operations. Proposing a cylinder shape capsule containing a rotating piston that moves back and forth between the edges of the capsule. The piston is cut through with certain fluid pass ways (holes) which may be shifting between being open, being closed, and anything in between. The combined movement of holes-drilled rotating piston will allow this universal unit to adjust for pumping, mixing and reacting fluid, and fluid components. By lining up the inner sides of the piston holes with fluid impact materials (FIM) the same generic unit can be used for catalytic reactions and for separation challenges. These generic units are linked "Lego like" to form a compound process, replacing the familiar continuous operation. The multi-mode piston (MMP) unit is completely specified by a digital representation of the shift position , the rotational position and the open/closed positions of the fluid pass ways. This allows for an efficient imposition of control strategy and for optimized manufacturing. The resultant digital representation renders the control strategy to become AI friendly, consistent with supervised learning tools for improving the efficiency of many chemical processes that transform from continuous mode to quantum fluid mode. While appearing promising, the concept is in its preliminary stages and its prospective impact is not yet well determined.

Dental anxiety (DA) negatively affects patients’ oral and overall health. This study explored attitudes and clinical practices of licensed Ohio general dentists who treat patients with DA. Methods: An anonymous self-administered mail survey was sent to 500 general dentists licensed and practicing in Ohio. Responses to 21 pre-coded questions were analyzed. Frequencies were examined; cross-tabs, Chi-Square, and Fischer’s Exact Test were calculated for statements according to dentists’ gender. Alpha was set at p = 0.05. Results: Nearly all respondents treated anxious patients; males were more likely to find it challenging than females. Dentists were most familiar with distraction, although half found nitrous oxide to be an effective tool. Female dentists were more likely than males to be familiar with anxiolytics and find them effective. Conclusion: Overall, Ohio general dentists are most familiar with using distraction and nitrous oxide during appointments for anxious patients. Gender differences exist in attitudes towards anxiolytic use for patients with DA. Practice Implications: By identifying techniques that are comfortable for patient and practitioner, oral health disparities associated with DA may be reduced.

Fractional flow reserve (FFR) is regarded as the gold standard for assessing the functional significance of coronary artery lesions, yet it remains underutilized in clinical practice. Our objective was to investigate whether FFR results have the potential to alter treatment decisions for coronary lesions compared to visual assessments of angiographic images made by three operators at a high-volume interventional center. In this retrospective study, we aimed to reassess the angiographic images of 63 patients presenting with chronic coronary syndrome (n=39, 61.9%) and acute coronary syndrome (n=24, 38.1%) who underwent FFR. Three experienced interventional cardiologists (with >300 PCI procedures per year) reevaluated, blinded to FFR results, 105 ambiguous lesions in 63 patients to determine angiographic significance and treatment strategy. The observers reached a concordant agreement (≥2 operators made the same decision) to perform PCI in 60 (57.1%) of the lesions based on angiographic evaluation. Interestingly, 9 (15%) of these lesions were functionally non-significant (FFR &gt;0.80). The observers agreed to defer PCI in 45 (42.9%) of the lesions; however, 4 (8.9%) of these were functionally significant (FFR ≤0.80) and required PCI. Thus, inter-observer concordance in visual-guided therapeutic decision-making is variable and not always confirmed by the functional significance of coronary lesions.

Keywords: Chronic Obstructive Pulmonary Disease (COPD), Long Non-Coding RNAs (lncRNAs), Molecular Pathogenesis, Inflammation, Lung Cancer, Diagnostic Biomarkers

this paper focuses on a scientific study of the restoration, rehabilitation and reuse of the great throne hall, the most important hall in al-jawhara palace. it also aims to study the most important factors and forces of damage that affected the great throne hall, natural, biological, and human, and the resulting damage. field tests were performed, laboratory tests to determine fracture stress, liquidity and spandex limits tests, chemical analysis on soil samples and geoelectrical testing of the soil, and the results did not show caves or voids in the ground until a depth of 10.00 m, construc-tion materials were studied and tested using x-ray, (xrd), mechanical tests (tensile, shear, com-pression), and a study of the effect of seismic loads on the walls; the results showed horizontal and vertical cracks; based on the study and analysis of these cracks, it was possible to present modern techniques in restoration and reinforcement methods, and in conclusion, the researcher's recommendations.

This study investigates the impact of specimen size on the mechanical properties of wood, specifically focusing on compression strength, elastic modulus, and Poisson's ratio. Compression tests were conducted using three different specimen sizes (20mm×20mm×30mm, 40mm×40mm×60mm, 60mm×90mm×90mm) in the longitudinal, radial, and tangential directions. Mechanical parameters, failure mechanisms, load-displacement curves, and stress-strain relationships were systematically analyzed for each size. The study also evaluated the influence of specimen size on the accuracy of finite element numerical simulations by utilizing the obtained mechanical parameters. The results reveal a significant correlation between compressive strength and specimen size, indicating a decrease in compressive strength with increasing specimen size. Conversely, elastic modulus and Poisson's ratio exhibit less sensitivity to variations in specimen size. Notably, parameters derived from small-sized specimens (20mm×20mm×30mm) exhibited substantial errors, while those obtained from medium-sized (40mm×40mm×60mm) and large-sized specimens (60mm×90mm×90mm) demonstrated greater reliability, providing precise results in finite element numerical simulations.

From October 28 to November 05, 2013, we conducted a termite sampling in 3 protected sites in The Gambia (West Africa). Termites sampling is carried out in 100 m x 2 m transects repeated 3 times in each site. A total of 33 species of termites have been recorded. Of the 33 species, 22 are new to The Gambia. Additionnal measurements are given for several collected termite species. Euchilotermes arcuata Silvestri is elevated to the rank of species.

This study investigates the utilization of innovative green composites made from hemp shiv, a waste by-product of hemp cultivation, with the aim of promoting sustainability within the construction industry. The manufacturing method involve the application of pressure in a mold to create the samples. These materials were produced using an environmentally friendly binder consisting of colophony, arabic gum and corn starch, moreover white glue and bioepoxy are also used to compare with the green resins. Three different binder compositions for the specimens. The samples underwent mechanical testing through tensile and bending assessments, and their performance was compared to that of non-green binders to validate the effectiveness of the manufacturing processes. The study revealed that decreasing the moisture content during the curing process is crucial for improving the mechanical properties. The best results were achieved when using arabic gum as a binder, yielding a tensile strength of 2.16 MPa and a bending strength of 5.25 MPa, with a composition of 62.5% hemp shiv and a manufacturing process involving a pressure of 5 MPa.

In light of the accelerated pace of economic growth and urbanisation, the transformation of green buildings has emerged as a prominent area of re-search. A considerable number of existing buildings have been constructed and are still in use. However, the energy consumption and environmental impact throughout the entire life cycle of these buildings are not adequately considered in the renovation design. This results in high energy consumption and poor indoor comfort. In this work, we include improving the thermal insulation of buildings, such as thickening the insulation of external walls and replacing energy-efficient windows to reduce energy losses caused by temperature differences between in-door and outdoor buildings; Adopt energy-efficient HVAC systems to reduce en-ergy consumption and improve indoor air quality by upgrading equipment effi-ciency, optimizing duct design, and intelligent control systems; At the same time, we will introduce renewable energy sources such as solar energy, and we will not only install solar photovoltaic panels to generate electricity, but also use solar thermal collector systems to provide hot water and heating, so as to achieve di-versified and sustainable use of energy. Combined, these measures can effec-tively reduce the overall energy consumption of the building, reduce carbon emissions, and improve the comfort and health of the indoor environment. During the experimental analysis, the energy consumption and indoor comfort before and after the renovation were evaluated, and the results showed that the energy consumption was significantly reduced and living comfort was improved.

This review summarizes studies dedicated to the assessment of microvascular function based on microcirculatory oscillations monitored by the FMSF technique. Two approaches are presented. The first approach uses oscillatory parameters measured under normoxia conditions, expressed as flowmotion (FM), vasomotion (VM), and the normoxia oscillatory index (NOI). These parameters have been used for identification of impaired microcirculatory oscillations associated with intense physical exercise, post-COVID syndrome, psychological stress, and erectile dysfunction. The second approach involves characterization of the microcirculatory response to hypoxia based on the measurement of hypoxia sensitivity (HS). The HS parameter is used to characterize microvascular complications in diabetes, such as diabetic kidney disease and diabetic foot ulcers. Based on research conducted by the authors of this review, the FMSF parameter ranges characterizing microvascular function are presented. The diagnostic approach to assessing microvascular function based on flowmotion monitored by the FMSF technique has a wide range of applications and potential to be integrated into widespread medical practice.

The purpose of the study is to establish compliance of the design of the modernized car with the requirements for safe operation. An option has been proposed for upgrading a passenger wagon to a Mobile Diagnostic Complex for transporting a combined vehicle equipped with appropriate flaw detection equipment intended for rail diagnostics. The authors have established the most optimal option for locating the diagnostic vehicle on board the Mobile Diagnostic Complex (MDC) wagon, taking into account the additional load from the vehicle. To achieve this goal, the article developed a three-dimensional model of the supporting structure of the wagon body, proposed a methodology and presented the results of a study of the stress-strain state of the wagon body, taking into account the additional weight of the wagon. The article develops a methodology for studying the natural frequencies of vibrations of the wagon body and develops a three-dimensional model of the wagon for calculating dynamic indicators in the Universal Mechanism software package. Taking into account the previously carried out strength calculations, as well as in order to maintain the factory life cycle indicators of the supporting structure of the wagon body, it is recommended to use the model in the first version.

The production of nanoparticles has recently surged due to their varied applications in biomedical, pharmaceutical, textile, and electronic sectors. However, this rapid increase in nanoparticle manufacturing has raised concerns about environmental pollution, particularly due to their potential adverse effects on human health. Among the various concerns, inhalation exposure to nanoparticles poses significant risks, especially affecting the respiratory system. Airway epithelial cells play a crucial role as the primary defense against inhaled particulate matter and pathogens. Studies have shown that nanoparticles can disrupt the airway epithelial barrier, triggering inflammatory responses, generating reactive oxygen species, and compromising cell viability. However, our understanding of how different types of nanoparticles specifically impact the airway epithelial barrier remains limited. To investigate nanoparticle-induced cellular responses and barrier dysfunction, both in vitro cell culture models and in vivo murine models are commonly utilized. In this review, we discuss the methodologies frequently employed to assess nanoparticle toxicity and barrier disruption. Furthermore, we analyze and compare the distinct effects of various nanoparticle types on the airway epithelial barrier. By elucidating the diverse responses elicited by different nanoparticles, we aim to provide insights that can guide future research endeavors in assessing and mitigating the potential risks associated with nanoparticle exposure.

The objective of this study was to investigate the impact of athletes' respiratory muscle strength, as assessed through maximal inspiratory (MIP) and expiratory pressure (MEP), on aerobic endurance, as indicated by maximal oxygen consump-tion (Max VO2) kinetics. Respiratory muscle strength was assessed using a digital spirometer (Pony FX Cosmed, Italy), while maximal oxygen utilization capacity was measured using a breath-by-breath automatic portable gas analysis system (Cosmed K5, Italy). Statistical analysis was conducted utilizing SPSS 22.0. Based on the standardized regression coefficients (β), it was found that MEP (mean ± SD: 130.95 ± 42.82) and inspiratory diaphragmatic circumference values significantly influenced ventilatory equivalent (VE), oxygen consumption (VO2), and carbon dioxide pro-duction (VCO2). Conversely, the remaining predictor variables did not exhibit a sig-nificant effect on VE (mean ± SD: 134.80 ± 36.69), VO2 (mean ± SD: 3877.52 ± 868.47 ml), and VCO2 (mean ± SD: 4301.27 ± 1001.07 ml). In contrast, measurements of chest circumference (mean ± SD: 91.40 ± 10.72 cm), MEP, and diaphragmatic cir-cumference during inspiration (mean ± SD: 95.20 ± 10.21 cm) were found to signifi-cantly impact Max VO2 (mean ± SD: 58.52 ± 10.74 ml/kg/min), while the other pre-dictor variables did not demonstrate a significant effect on Max VO2. Conclusively, the study revealed that measured values of diaphragmatic circumference during inspiration and MEP exerted a notable influence on Max VO2, VE, VO2, and VCO2. Our findings underscore the importance of considering respiratory muscle strength in assessing and enhancing athletes' aerobic performance. These insights contribute to a deeper understanding of the interplay between respiratory function and exercise capacity, offering potential avenues for optimizing training regimens and perfor-mance outcomes in athletic contexts.

In genomics analysis, with the development of sequencing technology and the rapid growth of data volume, how to effectively identify and analyze important information in genomic data from massive data has become an important challenge. Identify key patterns and features in genomic data through advanced community testing methods. First, genomic data often contains a lot of noise and redundant information that needs to be processed through steps such as normalization, filtering, and dimensionality reduction. Normalization makes data at different scales comparable, filtering out data points with low quality or missing values, and dimensionality reduction reduces data dimensions through principal component analysis (PCA) and retains the main information. The gene co-expression network establishes the connection relationship between genes by calculating the expression similarity matrix between genes, and applies the Louvain algorithm to maximize the modularity of the network, aggregate nodes layer by layer, form a community structure, and identify the complex relationship and potential structure between genes. Finally, we utilize the cancer dataset to evaluate the proposed model. From our extensive experimental results, we can observe that Louvain's algorithm indicates outperformances and accuracy in the recognition and analysis of genomic data.

Digitalization has fundamentally changed the global economy and will continue to do so. This study investigates how the US Federal Reserve and US Treasury may work together to use decentralized finance (DeFi) systems to promote economic growth in local communities. The study looks into the potential for transformation and the difficulties in incorporating DeFi into conventional financial institutions. Research shows that the use of cash as a means of payment is widely expected to decline in the future. As a result, the public’s ability to make transactions using central bank money may decline rapidly. This study's goals are to solve economic issues, promote innovation, and increase financial efficiency. The use of in-depth interviews, theme analysis, case studies, stakeholder perspectives, comparative analysis, and document analysis is suggested as part of a qualitative research methodology. The goal of these approaches is to offer a sophisticated comprehension of the dynamics of collaboration and the consequences of DeFi integration in the context of the Federal Reserve-Treasury relationship. Important data sources that are necessary to answer the research question are indicated, such as US Treasury statistics, Federal Reserve publications, DeFi platforms, and International Monetary Fund economic indicators. Informed decision-making and policy formation may pave the way for a more inclusive and efficient financial ecosystem, which will eventually drive regional economic growth in the United States and promote monetary sovereignty for the aforementioned monetary entities. This can be achieved by investigating creative collaboration tactics between the Federal Reserve and the US Treasury.

The integration of Augmented Reality (AR) into Human-Robot Interaction (HRI) represents a significant advancement in collaborative technologies. This paper provides a comprehensive review of AR applications within HRI, emphasizing their role in enhancing collaboration, trust, and safety. By aggregating findings from numerous studies, this research highlights key challenges, including the need for improved situational awareness, enhanced safety, and more effective communication between humans and robots. A framework developed from the literature is presented, detailing the critical elements of AR necessary for advancing HRI. The framework outlines effective methods for continuously evaluating AR systems for HRI. This structured approach focuses on enhancing collaboration and safety, with a strong emphasis on integrating best practices from Human-Computer Interaction (HCI) centered around user experience and design.

This study investigates the compressive strength and workability of concrete incorporating coconut shells and bamboo strips as alternative aggregates. The research compares traditional concrete to concrete mixtures with varying percentages of coconut shells and bamboo strips. Specifically, the study examines the effects of adding 10% coconut shell, 10% bamboo strip, and a combination of 5% coconut shell and 5% bamboo strip by volume to the concrete mix, tested in both C20 and C30 grades. To prepare the materials, coconut shells and bamboo strips were first crushed and then sieved. The sieving process retained particles that passed through a 10mm sieve but were retained on a 4.7mm sieve. The primary focus of the experimental tests was on measuring the compressive strength of the resulting concrete mixtures. The findings indicate that concrete incorporating coconut shells showed moderate workability. In contrast, concrete with bamboo strips exhibited lower workability. Regarding compressive strength, the concrete mix containing a combination of 5% coconut shell and 5% bamboo strips demonstrated a reduction in strength compared to the control group of normal concrete. This research highlights the potential of using coconut shells and bamboo strips as sustainable alternatives in concrete construction. While the workability varies between the different materials, the results provide valuable insights into their suitability for specific applications. This encourages further exploration of eco-conscious building practices and the development of sustainable construction materials.

Ferroptosis is implicated in viral neuropathogenesis and may underlie HIV-associated neurocognitive impairment (NCI). Emerging data also suggest differences in brain iron transport by sex. We hypothesized that circulating ferritins that inhibit ferroptosis associate with neurocognitive function and NCI in people with HIV (PWH) in a sex-biased manner. Serum ferritin heavy-chain-1 (Fth-1), ferritin light-chain (Ftl), and urinary F2-isoprostanes (uF2-isoPs, specific lipid peroxidation marker) were quantified in 324 PWH (including 61 women) with serial global (NPZ4) and domain-specific neurocognitive testing. Biomarker associations with neurocognitive test scores and NCI were evaluated by multivariable regression; correlations with uF2-isoPs were also assessed. Higher Ftl and Fth-1 associated with less NCI in all PWH (adjusted odds ratios 0.53, 95% Confidence Interval (95% CI) 0.36-0.79 and 0.66, 95% CI 0.45-0.97, respectively). In women, higher Ftl and Fth-1 associated with better NPZ-4 (Ftl: adjusted beta (β)=0.15, 95% CI 0.02-0.29; Ftl-by-sex βinteraction=0.32, p=0.047) and domain-specific neurocognitive test scores. Effects on neurocognitive performance persisted for up to 5 years. Levels of both ferritins correlated inversely with uF2-isoPs in women (Ftl: rho=-0.47, p<0.001). Circulating Ftl and Fth-1 exert sustained, sex-biased neuroprotective effects in PWH, possibly by protecting against iron-mediated lipid peroxidation (ferroptosis). Larger studies are needed to confirm the observed sex differences and further delineate underlying mechanisms.

Yttria stabilized zirconia materials are frequently used in mechanical engineering and biomedical applications. Demanding loading conditions require materials combining a high level of strength and fracture toughness. A ready to press alumina doped 2 mol% yttria stabilized zirconia powder was shaped by axial pressing and sintering in air at 1250 - 1500 °C for 2 h. The best combination of strength and toughness value of 7.8 MPa√m. Materials sintered in the middle of the chosen temperature range combine fully density, high transformability and small grain size. Toughness measurements by direct crack length measurements delivered unrealistically high fracture toughness values.

Background Sarcopenia is a state with progressive and generalized loss of skeletal muscle mass and strength. It is a serious complication occurring in chronic kidney disease (CKD) patients which increases morbidity and mortality rate. Sarcopenia is diagnosed when loss of both compartments - muscle strength and skeletal muscle quality or quantity are present. However, there are still numerous patients, also with CKD, diagnosed as pre-sarcopenic individuals with low muscle strength and normal skeletal muscle quality or quantity and conversely, with correct muscle strength and decreased skeletal muscle mass, who are prone to develop sarcopenia in future life. It is crucial to examine numerous variables possibly associated with changes of skeletal muscle mass and muscle strength in terms of preventing the development of sarcopenia. The aim of the study was to investigate anthropometric and clinical correlates and sources of variation in both skeletal muscle mass and muscle strength in advanced stages of CKD. Methods The study sample consisted of 84 non-dialysis dependent patients of both sexes (including 45.2% of women) with eGFR < 45 ml/min/1.73m²: 26.2% with eGFR 30-44 mL/min/1.73 m², 65.5% with eGFR 15-29 mL/min/1.73 m² and 8.3% with eGFR < 15 mL/min/1.73 m². Muscle strength was estimated by measuring hand grip strength (HGS) with the use of handheld hydraulic dynamometer. Muscle quantity was measured by bioimpedance spectroscopy using Body Composition Monitor. Appendicular skeletal muscle mass (ASM) was calculated according to Lin’s formula. Serum creatinine, urea, uric acid and albumin were measured. Results In bivariate analysis we found that ASM significantly and positively correlated with anthropometric variables such as body mass (r=0.903, p<0.001), NH weight (r=0.882, p<0.001), height (r=0.694, p<0.001), body mass index (BMI) (r=0.701, p<0.001), lean tissue mass (LTM) (r=0.664, p<0.001), lean tissue index (LTI) (r=0.433, p<0.001), fat mass (r=0.614, p<0.001) and fat tissue index (FTI) (r=0.449, p<0.001), and was negatively associated with clinical variable such as hydration status (p<0.001). HGS significantly and positively correlated with anthropometric parameters such as body mass (r=0.319, p=0.003), NH weight (r=0.315, p=0.004), height (r=0.666, p<0.001), LTM (r=0.490, p<0.001), LTI (r=0.238, p=0.029), and ASM (r=0.501, p<0.001), and was negatively associated with clinical variables like uric acid (p=0.039) and urea (p<0.001). After adjustment for age, sex and height, HGS remained significantly and negatively related with uric acid (β=-1.078, p=0.041) and hydration status (β=-0.805, p=0.042). Conclusions In CKD patients, ASM is determined mainly by anthropometric parameters but HGS - both by anthropometric and clinical variables specific for CKD.

Currently, in some domestic and foreign mines, the backfill drilling pipeline experience a rupture phenomenon even when the wear degree is low. This results in a delay in production due to the filling becoming 'sick'. This paper presents, for the first time, the damage mechanism from a mechanical perspective and re-derives the anti-extrusion strength model of the backfill drilling pipeline. We investigate the influence of law on the anti-extrusion strength of pipelines from the perspective of stratum and cement ring. We then verify the theoretical and simulation results through engineering examples. The results demonstrate that the Mises stress criterion is a suitable modification principle for the anti-extrusion strength model of the backfill drilling pipeline. The anti-extrusion strength of the pipeline is related to the elastic modulus and Poisson's ratio of the stratum, and the thickness of the cement ring. It is negatively affected by the depth of the stratum. For hard strata, a cement ring with a smaller elastic modulus is suitable, while for soft stratum, a cement ring with a larger elastic modulus is recommended. When the missing angle of the cement ring is less than 60°, the stress concentration factor increases up to 2.2. The stress unloading capacity of the cement ring ranges from 32.7% to 37.8%, and optimal performance of the cement ring is achieved when it has high strength and low rigidity. The backfill filling pipeline of a copper mine abroad was destroyed due to external extrusion force exceeding its anti-extrusion strength value. The modified pipeline anti-extrusion strength model is 18.2% higher than the casing API strength value. This finding can inform the design of the backfill filling pipeline for China's kilometer-deep wells in the future.

52 years have passed since President Nixon launched the "War on Cancer". The goals outlined by the President were not achieved because cancer treatment applied such as chemotherapy, radiotherapy, and targeted therapy have not fully met expectations. We suggest a new chemotherapeutic strategy: disrupting the communication between cancer cells and their microenvironment by chemical means. Immunological synapses that form between cancer cells and immune or other stromal cells provide an attractive target for this approach. Synapses form ligand-receptor clusters within interface of the interacting cells. Despite their differences, synapses share common properties: intercellular protein clusters; the proximity of these proteins; and their cooperative interaction making a synapse an unified functional unit. Synapses provide the limited space for the focused intercellular exchange of signaling molecules and particles. Therefore, destruction of synapses is expected to cause collapse of various tumor types. Additionally, the clustered arrangement of synapse components offers opportunities to increase treatment safety by reducing the concentration of cell impermeable agents used, to enhance its specificity applying cross-linking reagents, thus restricting modifications of surface-exposed molecules. By attaching a cleavable cell permeable toxic agent to a crosslinker should further enhance a killing potential in treating cancer. The proposed approach promises to be simple, universal, and less expensive than existing cancer therapy methods.

The existing PDC(Polycrystalline Diamond Compacts) -cone hybrid bit bearing adopts a unilateral support structure, which is prone to stress concentration in the journal area, resulting in fracture and wear failure of the bearing, thus reducing the service life of the hybrid bit. In this paper, a new type of double supported bearing hybrid bit is proposed. The static strength analysis of unilateral and bilateral support bearing structures is carried out by finite element simulation, and the stress and strain distribution of the two structures under the load of 20KN-100KN is obtained. Experimental devices for unilateral and bilateral support bearing structures are designed and manufactured to complete 50KN-100KN static pressure loading experiments. The results showed that the stress and strain of unilateral and bilateral support bearing increased linearly with the increase of load. Compared with unilateral bearing, when the load was 100KN, the maximum Mises stress of bilateral bearing decreased from 358.80MPa to 211.10MPa, with a decrease of 41.16%. The maximum contact stress decreased from 415.20MPa to 378.10MPa, decreased by 8.94%, and the maximum principal strain decreased from 11.01e-4 to 9.71e-4, decreased by 11.81%. The axial strain in the danger zone was reduced by 14.68% and 17.35%, respectively. It is found that the contact stress of the simulation data is highly correlated with the bearing life, and the service life of the bilateral bearing bit is increased by 8.94%. The simulation data and experimental results provide data support for the production of hybrid bits with bilateral bearing support.

The prevention, mitigation and treatment of movement impairments, ideally, requires early diagnosis or identification. As the human movement system has physiological and functional redundancy, movement limitations do not promptly arise at the onset of physical decline. A such, prediction of movement limitations is complex: it is unclear how much decline can be tolerated before movement limitations start. Currently, the term ‘homeostatic reserve’ or ‘physiological reserve’ is used to refer to the redundancy of the human biological system, but these terms do not describe the redundancy in the muscle architecture of the human body. The result of functional redundancy is compensation. Although compensation is an early predictor of movement limitations, clear definitions are lacking and the topic is underexposed in literature. The aim of this article is to provide a definition of compensation and emphasize its importance. Compensation is defined as an alteration in the movement trajectory and/or altering muscle recruitment to complete a movement task. Compensation for capacity is the result of a lack in neuromusculoskeletal reserve, where reserve is defined as the difference between the capacity (physiological abilities of the neuromusculoskeletal system) and the task demand. Compensation for movement objectives is a result of a shift in weighting of movement objectives, reflecting changing priorities. Studying compensation in biomechanics requires altered protocols in experimental set-ups, musculoskeletal models that are not reliant on prescribed movement, and inclusion of alternative movement objectives in optimal control theory.

This paper presents a review on numerical and experimental methods to predict fracture of ad-vanced high strength steels (AHSS). AHSS are widely processed through sheet metal forming processes. Although being an excellent choice when lightweight, high strength and ductility are critical factors, their multi-phase microstructure accentuates forming challenges. To accurately model forming behavior, necking based failure criteria as well as direct fracture models require improvements. As a necking based failure model, the conventional forming limit diagram/curve (FLD/FLC) presents limitations such as in estimating direct fracture (surface cracks, edge cracks, shear cracks), as well as deformation histories under nonlinear strain paths. Thus, significant re-search efforts are being made towards the needs of advanced fracture constitutive models capa-ble of predicting fracture scenarios without necking, more frequently observed in the realm of AHSS. Scientific community research is divided into several directions aiming at improving the forming and fracture behavior accuracy of parts subjected to sheet metal forming operations. In this review paper, a comprehensive overview on ductile fracture modeling is presented. Firstly, the FLD/FLC limitations modeling fracture behavior in sheet metal forming operations are stud-ied. Followed by the recent trends in constitutive material modeling. Afterwards, material char-acterization methods advancements to cover a broad range of stress states are comprised. Final-ly, damage and fracture models predicting failure in AHSS are investigated. This review paper supplies relevant information on the current issues the sheet metal forming community is chal-lenged with due to the trend towards AHSS employment in the automotive industry.

We utilized camera traps to assess animal diversity, relative abundance, and anthropogenic activities in the Jhalana Reserve Forest (JRF), located amidst Jaipur, with a population of 3.9 million people. Between November 2017 and November 2019, camera traps were strategically deployed in both the tourist zone and peripheral areas, capturing 16,328 photos. This study represents the first comprehensive baseline assessment of animal diversity in JRF, documenting a total of 39 species, including 18 bird species, 14 mammals, and six domestic species, alongside human activity. Among the 14 mammal species, seven were carnivores. Notably, we identified 25 individual Indian leopards (Panthera pardus fusca) during 2017-2018, comprising 8 males and 17 females, highlighting the leopard as the apex predator in JRF. Concurrently, domestic animals accompanied by humans were observed within JRF. However, rigorous conservation efforts and patrols by the Rajasthan Forest Department resulted in a notable decline in human intrusion, reducing from 28.0% in 2017-18 to 3.9% in 2018-2019, with domestic animal activity reaching zero in the latter period. Consequently, the relative abundance of wildlife species increased during the study period of 2018-2019, underscoring the positive impact of conservation strategies implemented by authorities. Our findings affirm that camera traps effectively establish baseline data, assess animal diversity, and evaluate relative abundance in reserve forests situated within human-dominated landscapes. This study provides critical insights to inform the development and implementation of conservation strategies in similar protected areas.

Based on the dynamic strength variation mechanism of concrete under complex loading conditions, two approaches were devised: numerical testing and CT scanning, guided by the principle of minimizing energy dissipation. A methodology for calculating concrete's failure area and measuring its strength was developed. The analysis delves into the mechanisms behind failure patterns and variations in concrete specimen strength, focusing on crack initiation, development, and the resultant failure surface formed by crack propagation, along with the stress distribution in concrete specimens subjected to diverse loading conditions. Through evaluating the strength and computed failure area of concrete specimens, it is evident that the loading method influences both the strength and failure area of concrete specimens. In general, a larger failure area correlates with a higher measured strength.

With continuous increase in integration of the semiconductor devices, the requirements on size accuracy and surface quality of the etched lead frame are higher. The etchant is a key factor on etching process and etched surface quality, while effects of the difference in etchants on microscopic etched surface morphology of the Cu alloy have not been directly studied. In this study, the aqua regia, acidic FeCl3 and CuCl2 solutions were used as etchants, and the CuCrSn alloy specimens with different microstructure were etched and characterized. The results show that the etching rate in aqua regia is high, and the grain orientation, grain boundary (GB) and dislocation have significant influence on the local etching rate. The preferential etching of some atomic planes forms steps between grains with different orientations, and the preferential etching around the GB and dislocation group forms grooves, resulting in high surface roughness. For etching of the FeCl3 and CuCl2 etchants, the steps and grooves become blurred, and almost invisible on the surface etched by the CuCl2 etchant, thus the surface roughness is much lower. The CuCrSn alloy surface etched by the aqua regia is clean, with little Cr-rich particles, while high density Cr-rich particles are remained on the surfaces etched with the FeCl3 and CuCl2 etchants. For the same kind of etchant, the ion concentration can affect the etching mechanism and etching surface morphology.

Infrastructure development is rapidly increasing, driving up demand for concrete, a key construction material. Cement and aggregate are essential constituents, with global cement production reaching 4.1 billion metric tons in 2011 and CO2 emissions hitting 1.7 billion metric tons by 2024, a significant contributor to carbon emissions. To address this, alternative constituents like Rice Husk Ash (RHA) and Animal Bone Powder (ABP) are proposed. With rice husk comprising 20% of rice weight and a substantial cattle population in Bangladesh, RHA and ABP offer promising alternatives. This study examines the benefits and limitations of incorporating RHA and ABP into cement, focusing on concrete strength and permeability. By replacing varying percentages of cement with RHA and ABP simultaneously, experiments evaluate their impact on concrete properties after 28 days of curing. The research aims to identify the optimal combination for sustainable concrete production, reducing environmental impact by curbing waste generation and pollution. Results show that compressive strength increases and permeability decreases with up to 5% replacement of RHA and ABP, highlighting their potential for enhancing concrete performance while mitigating environmental concerns.

Prunus armeniaca L. is the native species of cultivated apricot, which is important information for studying the origin, succession pattern, pest control, sustainable development of biodiversity of economic tree species of the genus Apricot, etc. However, with global climate change and increasingly intense human activities, the survival environment of Prunus armeniaca L. is under serious stress, and exploring the potential survival space of Prunus armeniaca L. is an important way to protect the health and development of Prunus armeniaca L.. Exploring the potential living space of Prunus armeniaca L. is an important way to protect the healthy development of Prunus armeniaca L. The Yili River Valley is a typical distribution area of Prunus armeniaca L. . Exploring the potential distribution suitable area of Prunus armeniaca L. in the Yili River Valley and analyzing its future change trend can provide scientific guidance for the protection, development, and utilization of Prunus armeniaca L.. Based on the Geographic Information System software platform combined with the MaxEnt Model, we simulated the potential distribution areas and the degree of adaptation of Prunus armeniaca L. in the Yili River Valley, and predicted the potential distribution changes of Prunus armeniaca L. in the future under different situations. Based on the above methods, the following results were obtained: (1) The MaxEnt Model simulated the geographic distribution of Prunus armeniaca L. with high accuracy and an AUC value of 0.969, and the area of the currently suitable area for Prunus armeniaca L. in the Yili River Valley was about 10407.77 km2, accounting for about 18.45% of the overall land area of the Yili River Valley; the area of the highly suitable area was about 1380.9 km², accounting for about 13.26%, the area of the medium suitable zone is about 2830.15km², and the area of low suitable zone is about 6196.05km². (2) The maximum increase in the total area of the suitable zone under the future low-radiation forcing scenario is 11.49%, and the minimum increase under the future medium-high forcing scenario is 4.94%. (3) The overall migration was in the southwest direction, with the largest migration angle under the SSP245 scenario and the largest migration distance under the SSP585 scenario. Under the background of future climate change, there is a tendency for the potential habitat of Prunus armeniaca L. in the Yili River Valley to expand from low altitude to high altitude, and altitude is the dominant geographic factor influencing the distribution of Prunus armeniaca L.. By simulating and studying the potential geographic distribution of Prunus armeniaca L. in the Yili River Valley under the background of climate change, we can reveal the response mechanism between the geographic distribution of Prunus armeniaca L. and the natural environment, which can provide scientific guidance and data support for the exploitation and protection of Prunus armeniaca L. in the future.

Concrete contributes 8% of all global carbon emissions making the need to find substitute critical for environmental sustainability. Research has indicated the potential for recycled plastics to be used as concrete substitutes. This study extends existing research by investigating the use of polycarbonate (PC) in plastic sand bricks as a mechanical equivalent to concrete. PC has high compressive strength, durability, impact strength, thermal resistivity, clarity, fatigue resistance, and UV resistance. This work provides a method and mold to produce a matrix of sand-plastic sample compositions with dimensions adhering to ASTM D695 standard for compressive properties of rigid-plastic. Compositions of 0% (control), 20%, 30%, 40%, and 50% sand by weight were tested. Samples were tested for compressive strength until yield and stress-strain behaviors plotted. The results for 100% PC demonstrated an average and maximum compressive strength of 71 MPa and 72 MPa, respectively. The 50% PC and 50% sand composition yielded an average and maximum compressive strength of 71 MPa and 73 MPa respectively with an increase in compressive stiffness, and transition to shear failure resembling cement. With a composite density of 1.86 g/cm3 against concrete’s average 2.4 g/cm3, and a compressive strength exceeding commercial concrete demands of 23.3 MPa to 30.2 MPa, this lightweight alternative meets the strength demands of concrete, reduces the need for new construction materials, and provides an additional recycling opportunity for nonbiodegradable waste plastic.

The COVID-19 pandemic underscores the significance of vaccine hesitancy in shaping vaccination outcomes. Understanding the factors underpinning COVID-19 vaccination hesitancy is crucial for tailoring effective vaccination strategies. This cross-sectional study, conducted in three communities across the United States and Lebanon, employed surveys to assess respondents' knowledge, attitudes, and perceptions regarding COVID-19 infection and vaccination. Among the 7,196 participants, comprising 6,775 from the US and 422 from Lebanon, vaccine hesitancy rates were comparable at 12.2% and 12.8%, respectively. Notably, a substantial proportion of respondents harbored misconceptions, such as attributing the potential to alter DNA (86.4%) or track individuals (92.8%) to COVID-19 vaccines, and believing in the virus's artificial origins (81%). Primary determinants of hesitancy included perceptions that the vaccine poses greater risk than the infection itself (aOR = 8.7 and 9.4, respectively) and negative recommendations from healthcare providers (aOR = 6.5 and 5.4, respectively). Conversely, positive endorsements from healthcare providers were associated with reduced hesitancy (aOR = 0.02 and 0.4, respectively). Targeting healthcare providers to dispel misinformation and elucidate COVID-19 vaccine risks holds promise for enhancing vaccination uptake.

Ovarian endometriomas have a negative impact on a patient’s reproductive potential and likely cause a reduction in ovarian reserve. The most commonly employed ovarian reserve parameters are anti-mullerian hormone (AMH) and antral follicular count (AFC). Surgical management options of endometrioma include cystectomy, ablative methods, ethanol sclerotherapy and combined techniques. The optimal surgical approach remains a matter of debate. Our review aimed to summarize the literature on the impact of surgical management of endometrioma on AMH, AFC and fertility outcomes. Cystectomy may reduce recurrence rates and increase chances of spontaneous conception. However, a post-operative reduction in AMH is to be anticipated, albeit there is evidence of recovery during follow-up. The reduction in ovarian reserve is likely multi-factorial. Cystectomy does not appear to significantly reduce, and may even increase, AFC. Ablative methods achieve an ovarian tissue-sparing effect and improved ovarian reserve, compared to cystectomy, has been demonstrated. A single study reported on AMH and AFC post- sclerotherapy and both were significantly reduced. AMH levels may be useful in predicting the chances of conception post-operatively. None of the aforementioned approaches has clearly demonstrated a superiority in terms of overall chances of conception. Surgical management of endometrioma may, overall, improve probability of pregnancy. Evidence on its value before medically-assisted reproduction (MAR) is conflicting, however, a combination of surgery followed by MAR may achieve the optimal fertility outcome. In view of the complexity of available evidence, individualisation of care, combined with optimal surgical technique, is highly recommended.

(1) Background. Cognitive impairment in people with Multiple Sclerosis (MS) has been studied in relation to some clinical variables (e.g., motor disability and disease duration) and lifestyle fac-tors such as Cognitive Reserve (CR). However, only very few studies have considered the interac-tion of clinical variables and cognitive reserve in preserving the integrity of the neuropsychologi-cal profile. In this paper, we hypothesised that a higher level of CR might predict good cognitive efficiency by modulating the clinical outcome of the disease. (2) Methods. A sample of 100 partic-ipants with MS (age range 30-74), was recruited and assessed remotely with a questionnaire to measure CR and a cognitive screening test. Data were analysed through Generalized Additive Models. (3) Results. We found that the model analysing the interaction between CR and disease duration, and between CR and motor disability was able to explain a significant percentage of cognitive performance. In particular, higher levels of CR predicted better cognitive performance despite long disease duration, unless the motor disability was severe. (4) Conclusion. This study highlights the crucial role of CR in modulating cognitive efficiency in people with MS.

Traditional Romanian food products are an integral part of local culture and spirituality. These food traditions have been formed over the centuries and represent a particularly important part for the development of a circular economy in rural areas. In order to contribute to the development of this sector of activity; we conducted a study on consumer perception of traditional Romanian food products. The purpose of this work was to identify the structure of the studies and the future directions of research related to the image of traditional food products through the bibliometric study as well as the identification of consumer trends of these products through a survey based on the questionnaire. The results obtained indicate that traditional Romanian food products are consumed by the majority of respondents participating in the survey and that this sector of activity has continuity in its development and presents a clear interest among citizens.

Cognitive reserve is the adaptability of cognitive processes in the face of brain aging and pathology. This study aimed to validate the Arabic version of the Cognitive Reserve Index Questionnaire (CRIq) in a healthy Lebanese sample. CRIq assesses cognitive reserve through three domains: education, working activity, and leisure time. Statistical measures, including descriptive and regression analysis along with structural equation modeling, were utilized to investigate the convergent and discriminant validity of CRIq, incorporating fluid intelligence (Gf) and measures of cognitive function, long-term memory encoding and retrieval (Glr), and processing speed (Gs). Results from 174 participants revealed that the activities assessed by CRIq-Arabic were comparable to the original CRIq study, with slight cultural differences. The internal consistency of CRIq-Arabic was good (Cronbach's α = 0.88), indicating reliability. Convergent validity was confirmed, with moderate to high loadings on the cognitive reserve latent construct. Discriminant validity was supported as correlations between cognitive reserve variables and non-target constructs (Gf, Glr, Gs) were less than 1. The findings provide an initial psychometric validation of the CRIq-Arabic. Further research in clinical samples is needed to enhance its utility in neuropsychological practice.

This study investigates by hybrid approach of classical calculations and numerical explicit FEM simulation the strain rate sensitive hardening of Polypropylene Sabic 83MF10 under dynamic tension loads. The Cowper-Symonds model is employed to characterize the non-linear increase in yield strength with strain rate, within the range of 0,01 to 1 [1⁄s]. For lower strain rates, a drastic decrease in yield strength is observed, suggesting the significant influence of creep and relaxation phenomena. The study proposes further research incorporating viscoelastic properties for a more comprehensive material model. Additionally, the study observes a disproportionate increase in yield strength for samples with smaller radius, indicating a dependency on triaxiality which suggests further research on the Drucker-Prager model for this material. The study concludes by recommending a broader range of input parameters for future studies, including the Johnson-Cook model and comparison of tensile test results with compression test results.

The new slide roller burnishing (SRB) method has been developed to produce mirror-like surfaces. Unlike conventional roller burnishing (RB), SRB is implemented through a unique device that allows the axes of the deforming roller and the rotary workpiece to cross resulting in a relative sliding velocity that can be controlled (in magnitude and direction) by varying the crossing angle. In the present work, the effect of SRB on the fatigue behavior of AISI 316 steel fatigue specimens was investigated by comparing with a conventional RB using the basic correlation in surface engineering: finishing–surface integrity (SI)–operating behavior. To obtain a more representative picture of the comparison, we implemented each method (RB and SRB) with two combinations of governing factors: (A) a radius of the roller toroidal surface of 3 mm, a burnishing force of 250 N and feed rate of 0.05 mm/rev (RB-A and SRB-A) and (B) a radius of the roller toroidal surface of 4 mm, a burnishing force of 550 N and feed rate of 0.11 mm/rev (RB-B and SRB- B). Both SRB-A (crossing angle of –45°) and SRB-B (crossing angle of –30°) achieved mirror-finish surfaces. SRB-B lead to the greatest fatigue strength and, thus, the longest fatigue life among all tested processes. SRB-B created the deepest zone (&gt;0.5 mm) with residual compressive macro-stresses and a clearly defined modified surface layer, whose thickness of more than 20 m is about twice that created by the other three processes.

The alternating stress caused by periodic high-pressure injection and extraction in gas storage can potentially induce fault slippage, compromising the sealing integrity of faults within these facil-ities. Understanding the mechanical behavior of faults under alternating stress is crucial for en-suring the long-term stability and safety of gas storage operations. To explore the impact of fault dip angle and fault gouge strength on fault slip characteristics, fault samples were prepared with uniaxial compressive strengths of 20.1, 30.2, 42.4, and 51.4 MPa at two distinct dip angles. Triaxial compression experiments were conducted under alternating stress conditions corresponding to operational pressures at a specific gas storage in China. Results indicate that faults with dip angles of 30° and 45° tend to fail at their weakest points. Increasing strength of fault gouge shifts failure mechanisms from interfacial failure between gouge and surrounding rock towards internal gouge failure, often accompanied by shear failure across sections, resulting in characteristic "X"-shaped conjugate shear failures. The decrease in the ratio of bedrock strength to fault gouge strength elucidates the observed phenomena of initial reduction followed by increased fault deformation. Transition points for faults with 30° and 45° dips occur around the strength ratios of 1.7/1 and 1.2/1, respectively. Fault damage exhibits a negative correlation with fault gouge strength and a positive correlation with fault dip angle. Samples with higher strength fault gouge at a 30° dip angle generally incur less damage compared to those with lower strength fault gouge at a 45° dip angle. Moreover, higher maximum static friction coefficients denote greater fault resistance to slipping, with 30° faults consistently demonstrating superior resistance compared to 45° faults. Additionally, higher strength fault gouge consistently enhances slip resistance under identical dip angles.

As high strength and ultra-high strength steels are widely used in all kinds of modern welded constructions, a lot of research is carried out to investigate the mechanical properties of weldments of these steels but there is a scarce information on such important characteristic as their corrosion behaviour. This research focuses on the corrosion behaviour of weld metal of weldments of S906QL and S700MC steels. Weld metal was tested electrochemically in a 3,5% NaCl aqueous solution via potentiodynamic scan to determine corrosion rate and its dependence on welding gap. No influence of welding gap on corrosion rate was found but the experimental results suggested that corrosion rate depended on the chemical composition of filler material and the microstructure of weld metal.

Background This study aimed to examine the acute effects of different pre-ST strategies on muscular performance and blood pressure (BP) responses in recreationally strength-trained women. Methods: Twelve overweight women with normal-to-elevated BP were recruited and performed six exper-imental protocols in a randomized order: 1) control protocol (CC) – BP assessed without exercises performed, 2) strength training (ST), 3) foam rolling warm-up followed by strength training (FR+ST), 4) specific warm-up followed by strength training (SW+ST), 5) aerobic exercise followed by strength training (AE+ST), and 6) stretching exercises followed by strength training (SE+ST). Strength training consisted of three sets at 80% of 10RM with a self-suggested rest interval between sets for bench press, back squat, bench press 45º, front squat, lat pull-down, leg press, shoulder press, and leg extension. Results: All experimental protocol had a lower total training volume, fa-tigue index, and repetitions performance in relation to ST (p

Evidence suggests that COVID-19 infection can cause lasting health consequences. Multidiscipli-nary rehabilitation services have been recommended to reduce the sequalae. However, the effec-tiveness of physical exercise interventions remains insufficiently documented. The aim of this study was to develop and implement a specific and well tolerated protocol-based, intervention to reduce muscle weakness in older adults impacted by COVID-19. Forty six older adults random-ized into Intervention and Control Groups. Isometric and isokinetic strength assessments were conducted for selected muscle groups using JBA Staniak® torquemeter and Biodex System 3 dy-namometer. Functional abilities were evaluated with the Time Up and Go test and Chair Stand Tests. Men in intervention group demonstrated a significant improvement in static conditions for knee flexors (KF), trunk extensors (TE) and trunk flexors (TF) and in dynamic conditions for knee extensors (KE). Women in intervention group showed significant improvement in static condition for EF, KF, TE and TF and in dynamic for a KE and for a KF. The interaction GROUP x TESTING SESSION was significant for Chair test (s) and Chair test (n). Our results demonstrate the effec-tiveness of a well-tolerated, protocol-based approach that can be used to diminish long lasting functional deficits in post-covid survivors.

Background. The treatment of coronary stenosis relies on invasive high risk surgical assessment to generate the fractional flow reserve diagnostics index, a ratio of distal to proximal pressures in respect of coronary atherosclerotic plaque causing stenosis. Non-invasive methods are therefore a need of the times. This study proposes an extensible mathematical description of the coronary vasculature that permits rapid estimation of the coronary fractional flow reserve. Methods. By adapting an existing closed loop model of human coronary blood flow, the effects of large vessel stenosis and microvascular disease on fractional flow reserve were quantified. Several simula-tions generated flow and pressure information which was used to compute fractional flow re-serve under a spectrum of conditions including focal stenosis, diffuse stenosis, and microvascular disease. Sensitivity analysis stratified the influence of model parameters on the index. The model was simulated as coupled non-linear ordinary differential equations and numerically solved us-ing an implicit higher order method. Results. Large vessel stenosis affected fractional flow re-serve. The model predicts that the presence, rather than severity, of microvascular disease affect coronary flow deleteriously. Sensitivity analysis revealed that heart rate may not affect the index. Conclusions. The model provides a computationally inexpensive instrument for future in silico coronary blood flow investigations as well as clinical-imaging decision making. A combination of focal and diffuse stenosis appears to be essential in reducing the index. In addition to pressure measurements in the large epicardial vessels, diagnosis of microvascular disease is essential. The independence of the index with respect to heart rate suggests that computationally inexpensive steady state simulations may provide sufficient information to reliably compute the index.

Remote sensing/GIS techniques are a versatile tool for x-raying serial forest structural changes in retrospect. It would be impossible to evaluate past occurrences and changes in forest extents in past decades at Effan Forest Reserve without non-conventional means. Therefore, we adopted remote sensing technology using Landsat images to evaluate land-use change and degradation rates in the area with a view to ascertaining causal factors for possible minimization of forest degradation in Effan Forest Reserve. Land-use/land-cover changes were analyzed using USGS-Landsat TM and ETM images of 1987, 2002, 2014 and 2019. Field-data were collected using handheld GPS receiver and spatial statistical analyses were conducted using the ground control points (GCPs). For inventory data, a systematic sampling technique was adopted using ten 1.05 km-transects at 500 m intervals. A total of 50 sample plots of 50 × 50 m were used. All tree species with Dbh ≥10 cm were enumerated. Nineteen tree species in ten families were encountered with Vitellaria paradoxa as the most-frequently occurring species in the area. IUCN-listed endangered Pterocarpus erinaceus, hitherto abundant in the area, was rarely encountered during the survey, while Vitellaria paradoxa is gradually shrinking, going the relative abundance in the area. The result further showed that primary and secondary forests decreased considerably by 258.03 ha (46.72%) and 9.18 ha (3.63%), respectively, with a total forest loss of 50.3% in 32 years (8.4 hayr-1, 1.6% per annum). While forest plantation size doubled by 369.72 ha within the period. This is worrisome as the remaining fragmented forests appeared to be on the decline, except the riparian vegetation, due to inaccessibility to the riparian by loggers. It thus appeared that forest protection approaches were ineffective. Increased protection efforts could save this forest reserve, and the concerned authority should consider a focused-enrichment planting involving indigenous species for ecosystem-repair.

A botnical survey was conducted in Kaptai reserve forests under Rangamati district in Bangladesh to study the flora of Karnaphuli range from May 2015 to October 2018. The survey was accompanied by a collection of voucher specimens enumerates 464 plant species belonging to 334 genera under 117 families from the forest range. The survey has confirmed 31 threatened forest species from this area along with many near threatened plant species.

A botnical survey was conducted in Kaptai reserve forests under Rangamati district in Bangladesh to study the flora of Karnaphuli range from May 2015 to October 2018. The survey was accompanied by a collection of voucher specimens enumerates 464 plant species belonging to 334 genera under 117 families from the forest range. The survey has confirmed 31 threatened forest species from this area along with many near threatened plant species.

Sialyllactose (SL) is a functional human milk oligosaccharide essential for immune support, brain development, intestinal maturation, and antiviral defense. However, despite its established health benefits, the effect of SL on exercise performance and muscle mass in mice remains unknown. Here, we aimed to investigate, for the first time, the effects of 6′-SL on muscle functions. Seven-week-old male C57BL/6J mice were administered 100 mg/kg 6′-SL for 12 weeks, after which exhaustive treadmill performance, muscle strength, and muscle phenotype were examined. The administration of 6′-SL significantly improved exhaustive treadmill performance metrics, including distance and exhaustion time. Grip strength was also increased by 6′-SL administration. Additionally, 6′-SL increased muscle mass in both the gastrocnemius (GAS) and soleus. 6′-SL administration led to an increase in the minimum Feret’s diameter and the protein expression of total myosin heavy chain in the GAS muscle. In conclusion, 6′-SL administration in vivo led to increased running distance and time by increasing muscle mass and strength. These findings collectively indicate that 6′-SL is a potential agent for improving muscle health and exercise performance.

CO2, CH4 and CO are the most critical atmospheric gases in terms of their impact on the radiative system, air quality and health. This work provides information on the direction of source areas and potential sources of emissions and shows many aspects of these gases by a statistical analysis using bivariate polar diagrams and local weather conditions (e.g., temperature, wind speed and wind direction) recorded at the Lamto station (LTO, 6°31N and 5°02W) in Côte d’Ivoire over the 2014-2018 period. The results show that the main regions contributing to the high concentrations of CH4 (> 1925 ppb) and CO2 (> 420 ppm) in the GSS, GSP, PSS and PSP seasons are the North and Northwest sectors of Lamto. In these directions, CH4 and CO2 concentrations are associated with wind speeds less than 6 m.s-1, due to the influences of local sources as emissions resulting from the degradation of organic matter submerged during the impoundment of the Taabo dam, and/nor human activities linked to the practice of intensive agriculture. In addition, the high concentrations of CO (> 350 ppb) are observed in GSS in the North, North-West, North-East and East sectors for wind speeds less than or equal to 9 m.s-1, due to the influences of both local and distant sources. The correlation coefficients between CH4 and CO, and between CH4 and CO2 are positive and significant in all sectors. However, those calculated between CO2 and CO have showed both low and high values in all seasons.

We propose a model for medium-term hydropower scheduling (MTHS) with variable head and uncertainty in inflow, reserve capacity, and energy price. With an increase of intermittent energy sources in the generation mix, it is expected that a flexible hydropower producer can obtain added profits by participating in other markets than just the energy market. To capture this added potential the hydropower system should be modeled with a higher level of details. In this context, we apply an algorithm based on stochastic dual dynamic programming (SDDP) to solve the nonconvex MTHS problem, and show that the use of Strengthened Benders (SB) cuts to represent the expected future profit (EFP) function provide accurate scheduling results for slightly nonconvex problems. A method to visualize the EFP function in a dynamic programming setting is provided, serving as a useful tool for a priori inspection of the EFP shape and its nonconvexity.

Concrete cracks and local damage can affect the bond performance between concrete and steel bars, thereby reducing the durability of reinforced concrete structures. Compared with general concrete crack repair methods, biomineralization repair not only has effective bonding capabilities but is also particularly environmentally friendly. In view of this, this study aimed to apply biomineralization technology to repair damaged fiber-reinforced lightweight aggregate concrete (LWAC). Two groups of LWAC specimens were prepared. The control group used lightweight aggregates (LWAs) without bacterial spores and nutrient sources, and the experimental group used LWAs containing bacterial spores and nutrient sources. These specimens were first subjected to compression tests and pull-out tests, respectively, and thus were damaged. After the damaged specimen healed itself in different ways for 28 days, secondary compression and pull-out tests were conducted. The self-healing method of the control group involved placing the specimens in an incubator. The experimental group was further divided into experimental group I and experimental group II. The self-healing method of experimental group I was the same as that of the control group. The self-healing method of experimental group II involved soaking the specimen in a mixed solution of urea and calcium acetate for two days, and then taking it out and placing it in an incubator for two days, with a cycle of four days. The test results showed that, compared with the control group specimens, the relative bond strength ratio of the experimental group II specimens increased by 17.9%. Moreover, the EDS and XRD analysis results confirmed that the precipitate formed at the crack was calcium carbonate, which improved the compressive strength and bond strength after self-healing. This indicates that the biomineralization maintenance method used in experimental group II is more effective.

Geopolymers, made from aluminosilicate raw materials, offer significant environmental advantages over conventional concrete (CC) mixes. This study explores the compressive strength, setting time, and durability of geopolymer concrete (GPC) cylinders, some of which include an additional ordinary portland cement (OPC) mix. Consistent material composition and testing methods are emphasized to achieve reliable results. MATLAB was utilized to develop and assess a neural network model predicting the compressive strength of GPC based on key variables. The model was validated using 16 experimental samples and 1047 samples from various studies. The performance plot displayed the Mean Squared Error (MSE) over iterations, identifying the best training performance at epoch 658 with an MSE of 5.3408. The Error Histogram highlighted distribution errors between predicted and actual compressive strength values, with the highest range from -1.015 to 0.3587, meaning that the predicted values were mostly within a small margin of error from the actual values. This narrow error range indicates that the ANN model has high accuracy in its predictions, as most errors are small and clustered around zero, demonstrating reliable performance in estimating compressive strength. Regression analysis showed varying correlation coefficients (training set R=0.98373, test set R=0.88164, and whole set R=0.96982), indicating adequate predictive accuracy. The results demonstrate that properly trained neural networks can effectively predict the compressive strength of GPC, highlighting its potential as a sustainable construction material.

This paper explores the effect of climate change on the regression of the Argan tree (Argania spinosa L. Skeels) woodland, focusing on the Argan Biosphere Reserve and especially in the Souss plain (Western Morocco). Rainfall and temperature data of four sites within the Argan Biosphere Reserve were analyzed over the last 60 years to assess any climatic change. Regression curves applied to the dataset showed an important decrease in rainfall (18 to 26 %) in the four locations as well as an increase in temperature (1 to 2 °C). These changes may have a detrimental effect on the Argan woodland although human factors have been reported to be the main factor of its regression. It can therefore be concluded that the reduction in rainfall and the increase in temperature should now be considered as factors of Argan woodland regression.

Power system decentralization has been an emerging topic for the past decade in an effort to improve power quality and environment protection via increased integration of renewable energy sources. Towards these objectives, decentralized microgrids have been proposed and thoroughly investigated in terms of technical capabilities and economic performance. In fact, the planning and actual operation of small-scale, decentralized microgrids has started in countries such as Canada, Japan, USA, UK and other countries. It is expected that the research in this area will progress and eventually take over the existing paradigm of large-scale power generation in the future. These small-size decentralized microgrids could be connected with nearby microgrids under normal operating conditions, but under special events, such as natural or man-made disasters, they would be disconnected and run in islanded mode. Under such high impact – low probability events, the microgrid must have resiliency to successfully re-connect with other microgrids and the main grid. In this paper, an Energy Management System (EMS) for a microgrid having a resiliency function, allowing to operate under islanded mode after an accident, is proposed. The proposed tool, called Resilient Energy Management System (ResEMS), aims at procuring reserve power into the microgrid’s Battery Energy Storage System (BESS) effectively, by importing it from the nearby connected power system. The accident is assumed to be a predictable natural disaster, which means that the accident occurrence time, duration and level of damage can be estimated. The proposed ResEMS has been applied to a microgrid comprising of a BESS, a diesel generator and several photovoltaic devices. The simulation results verify its beneficial operation.

Triple-negative breast cancer (TNBC) lacks the expression of estrogen receptors, human epidermal growth factor receptor 2, and progesterone receptors (PR). TNBC has the poorest prognosis among breast cancer subtypes and is more likely to respond to immunotherapy due to its higher expression of PD-L1 and a greater percentage of tumor-infiltrating lymphocytes. Immunotherapy has revolutionized TNBC treatment, especially with the FDA's approval of pembrolizumab (Keytruda) combined with chemotherapy for advanced cases, opening new avenues for treating this deadly disease. Although, immunotherapy can significantly improve patient outcomes in a subset of patients, achieving the desired response rate for all remains an unmet clinical goal. Strategies that improve responses to immune checkpoint blockade, including combining immunotherapy with chemotherapy, molecularly targeted therapy, or radiotherapy may improve response rates and clinical outcomes.  In this review, we provide a short background on TNBC and immunotherapy and explore the different types of immunotherapy strategies that are currently being evaluated in TNBC. Additionally, we review why combination strategies may be beneficial, provide an overview of the combination strategies, and discuss the novel immunotherapeutic opportunities that may be approved in the near future for TNBC.

In this study, cement is used as the component that provides the stabilizing effect in order to evaluate the hardness and stability of loess soil. To assess the strength characteristics of loess soil reinforced with cement, samples were created with four different cement contents and three different curing times. The materials were put through a series of tests to determine their flexural strength, direct shear strength, indirect tensile strength, and unconfined compressive strength. An appropriate cement dosage was found, in addition to a durability index that could be used to quantify the effect of water absorption investigations on cement-stabilized loess. Both of these discoveries were made simultaneously. Analyses of investigations such as scanning electron microscopy (SEM) and energy dispersive X-ray fluorescence spectrometry (XRF) examinations were carried out so that the fundamental mechanics of the materials could be comprehended. According to the findings, the cohesion of cement-stabilized loess is significantly more sensitive to structure than the friction angle of the material, and the cohesion is responsible for the increase in shear strength after remolding. To get the desired level of strength, it is necessary to adjust the cement's proportions. In addition, as the curing period progresses, we see an increase in the cement-stabilized loess's resistance and stiffness. This is because of the interactions that take place between the structure and the mineral composition. It is believed that this event was caused by the cementation that occurs naturally. As a consequence of this reaction, the production of new cementitious materials takes place. The cation exchange that causes the hydration and pozzolanic reaction that leads to the creation of aggregates and interparticle flocculation is responsible for their production. These findings suggest that cement may be utilized as a simple and effective method of loess stabilization, which will ultimately result in improved performance of the loess.

The aim of this paper is to explore the watertightness behaviour for high pressure applications using Multijetfusion technology and polyamide 12 as a material. It reports an efficient solution for manufacturing functional prototypes and final parts for water pressure applications. It provides manufacturing rules to engineers in the pressurized product development process up to 10 MPa of nominal pressure. The research findings show manufacturers the possibility of using additive manufacturing as an alternative to traditional manufacturing. Water leakage was studied using different printing orientations and wall thickness for a range of pressure values. An industrial ball valve was printed and validated with the ISO 9393 standard also meeting tolerance requirements. This paper is a pioneering approach to the additive manufacturing of high performance fluid handling components. This approach solves the problem of leakage caused by porosity in additive manufacturing technologies

This research paper investigates the enhancement of strength and performance of self-compacting concrete (SCC) for integration in Department of Public Works and Highways (DPWH) projects using a value engineering approach. The study explores key elements of SCC's strength and performance, including mix design optimization, construction practices, and durability considerations. Strategies to optimize SCC's strength, durability, and workability are discussed, emphasizing the benefits of SCC in improving construction efficiency and quality control within DPW infrastructure. The study also identifies challenges and gaps in SCC utilization, such as standardized performance verification and cost considerations, and proposes future directions for advancing SCC technology in civil infrastructure development.

Electronic cigarette (ecig) use in pregnancy is common, but potential effects on fetal development are largely unknown. The study goal was to examine the association between ecig exposure and fetal growth. Data were extracted from medical charts in this single site retrospective study. The sample, excluding those with known tobacco, alcohol, illicit drug, opioid, and benzodiazepine use, contained women who used ecigs throughout pregnancy and non-ecig user controls. Fetal size measurements from second and third trimester ultrasounds and at birth were expressed as percentiles for gestational age. Following adjustment for confounding factors, in the second trimester, only femur length was significant, with an adjusted deficit of 11.5 percentile points for ecig exposed compared to controls. By the third trimester, femur length difference was 28.5 points, with fetal weight difference also significant (17.2 points). At birth, all three size parameter differences between groups were significant. Significant size deficits were predicted by prenatal ecig exposure, becoming larger and impacting more parameters with increasing gestation. While additional study is warranted to confirm and expand upon these findings, this study adds to emerging data pointing to specific harms following ecig exposure in pregnancy, and suggests that ecigs may not be a “safer” alternative to combustible cigarette smoking in pregnancy.

Despite ongoing efforts, the relationship between groin strength and injury remains unclear. The challenge of accurately predicting injuries presents an opportunity for researchers to develop pre-vention strategies to reduce the occurrence of such injuries. Consequently, this issue requires further investigation to obtain insights into effective mitigation strategies. In 120 male soccer players the maximum isometric strength of the hip muscle groups was measured, and the strength ratios were calculated. Previous injury and anthropometric data were registered. Injury data were collected following the FIFA/UEFA consensus. The K- Nearest Neighbour (k-NN), was used to predict the incidence of injury, while the significant predictive variables of the k-NN algorithm were fitted into a multivariate logistic regression model (LR) to analyze the likelihood of players sustaining a groin injury. The LR model determined two variables as significant predictors of groin injury. Players were less likely to sustain a groin injury by 76% for each decrease of the Adductors/Abductors isometric strength ratio in the non-dominant limb (OR = 0.238, CI 95%= [(0.098-0.572]). Players with a history of previous injury had a 67% greater risk of sustaining an injury (OR = 0.333, CI 95%= [(0.1068-1.038]). Isometric hip adductor and abductor strength im-balances of the non-dominant lower limb and a history of previous injury were risk factors for groin injury in soccer players.

One of the challenges in the healthcare sector is making accurate forecasts across insurance years for claims reserve. The state-of-the-art envisages various methods for estimating the claims reserve but without being applied to systems that do not present huge variability and heterogeneity, such as the healthcare sector. The methodology is based on generalized linear models using the Overdispersed Poisson distribution as shown in the state-of-the-art. In this context, we developed a method to estimate the parameters of the quasi-likelihood function using a Gauss-Newton algorithm optimized through a genetic algorithm. The genetic algorithm plays a crucial role in glimpsing the position of the global minimum to ensure a correct convergence of the Gauss-Newton method, where the choice of the initial guess is fundamental. The proposed methodology has been entirely developed using MATLAB and has been applied to estimate the claims reserve in the healthcare system of the Tuscany Region in Italy, as case study. The results obtained were validated by comparing them with the state-of-the-art by measuring the confidence intervals of the Overdispersed Poisson distribution parameters. Therefore local healthcare authorities could use the proposed and improved methodology to allocate the resources dedicated to healthcare and global management.

Strong yet ductile alloys have long been desired for industrial applications to enhance structural reliability. This work produced two (CoCrNi)93.5Al3Ti3C0.5 medium-entropy alloys with exceptional strength-ductility combinations, via short/medium (3 min/30 min)-time annealing after hot-rolling. Three types of intergranular precipitates including MC, M23C6 carbides, and L12 phase were detected in both the samples. Noticeably, the high density of intragranular L12 precipitates were only founded in the medium-time annealed sample but not in another one. Upon inspection of deformed substructure, it was revealed that the plane slip is the dominant deformation mechanism of both the alloys. This is related to the lower stacking fault energy, higher lattice friction induced by C solute, and slip plane softening caused by intragranular dense L12 precipitates. Additionally, we noted that the stacking fault and twinning act as the mediated mechanisms in deformation of the short-time annealed alloy, while only the former in the medium-time annealed one. It is attributed to the higher energy stacking faults and the increased critical twinning stress caused by intragranular dense L12 precipitates that inhibited the twinning tendency. Our present findings provide not only a guidance for optimizing the mechanical properties of high/medium-entropy alloys, but also a fundamental understanding of deformation mechanisms.

In many previous studies, the conclusions for the effects of disturbance and environmental gradients on the diversity was remain controversial due to exclusions of trait-based diversity in their methodology. This study hypothesized trait-based indices are more likely to show monotonic and predictable relations than traditional based species diversity to guide effective restoration of tree species diversity against environmental change and anthropogenic factors. This study therefore, was initiated to access trait based functional diversity of Yayu Coffee Forest Biosphere Reserve (YCFBR), Southwest Ethiopia. Data was collected from 90 proportionally distributed plots along disturbance levels from core, buffer and transitional zones. For functional trait diversity estimation, traits relevant to plant-life strategy, competition and response to disturbances and climate change were selected. Multiple regression model was used to test the response of species diversity and functional diversity to disturbance and environmental gradients. The result revealed that, anthropogenic disturbance and elevational gradients are the most important factors influencing functional diversity in the YCFBR. Overall this study demonstrates that, trait based functional diversity is useful to predict adaptation potentials of species in heterogeneous environments. Species with low specific leaf area &amp; selective seed mass is recommended for the restoration of disturbed ecosystem.

With increasing air and sea temperatures, the thermodynamic environments over the oceans become more favourable for the development of intense tropical cyclones (TCs) with rapid intensification (RI). In fact, the number of TCs undergoing RI is rising (Zhao, et al., 2018; Bhatia, et al., 2019; Song, et al., 2020; Hong & Wu, 2021; Liu, et al., 2022). RI over coastal sea areas before landfalling is particularly impactful and threatening to coastal lives and properties. There have been studies showing that offshore areas within 400 km of the coastline have experienced a significant increase in RI events with the count tripling from 1980 to 2020 (Li et al., 2023). The south China coastal region consists of highly densely populated cities especially the Pearl River Delta (PRD) region. Intense TCs maintaining its strength or RI of TCs close to the coastal region presents substantial forecasting challenges. This study investigates the effect of sea surface and subsurface temperature and salinity on the intensification of five TCs, namely Super Typhoons Hato in 2017 and Mangkhut in 2018, Typhoon Talim, Super Typhoon Saola and Severe Typhoon Koinu in 2023, which significantly affected the south China coastal region and triggered high TC warning signals in Hong Kong. The analysis utilized the Hong Kong Observatory (HKO) TC track and intensity data, along with the sea temperature and salinity profiles generated using the China Ocean ReAnalysis version 2 (CORA2) of the National Marine Data and Information Service (NMDIS) of China. While high sea surface temperature (SST) of 30°C or above, low surface sea surface salinity (SSS) of 34 psu or below, and strong salinity stratification of at least 0.8 psu per 100 m depth may offer useful hints for predicting RI, they are part of a broader set of contributing factors. This study represents the initial documentation of sub-surface salinity's impact on intense TCs over the South China Sea (SCS) in recent years and will encourage further research to refine forecasting RI of TCs before making landfall near PRD taking into account the effect of freshwater from the Pearl River.

A new type of artificial block is proposed by modifying the traditional block. Based on the physical model experiment, the wave reflection and run-up characteristics of the new ecological blocks under regular waves were examined, and the influence of the height of the "planting trough" border on the hydrodynamic properties was analyzed. The results indicate that the wave reflection and run-up would decrease with a decrease in the breakwater slope. As wave height increases, wave run-up increases, and the reflection coefficient falls. Wave reflection and run-up increase with an increasing wave period. The relative depth of the water has a smaller impact on the wave reflection than the wave run-up. The reflection coefficient of the new ecological blocks is consistently lower than that of the conventional and continues to decrease as the border of the "planting trough" is raised. The raised borders prevent water loss in the trough, resulting in no significant improvement in the wave run-up performance of the new blocks. The reflection coefficient and the relative run-up R/H gradually increase with the average wave breaking parameter ξ increase. The crude permeability coefficients for the new blocks, New Heights 1 and New Heights 2, are 0.53, 0.53, and 0.54, respectively.

The treatment, disposal, and resource utilization of waste mud are challenges for engineering construction. This study investigates the road performance of waste mud–solidified soil and reveals the mechanism of how solidifying materials influence the strength and deformation characteristics of waste mud. Waste mud, collected from a highway reconstruction project, was mixed with ordinary Portland cement as a solidifying material. Unconfined compressive strength tests, consolidated undrained triaxial shear tests, resonant column tests, and consolidation compression tests were conducted to evaluate the solidification effect. The test results show that with an increase in cement content from 5% to 9%, the unconfined compressive strength of the waste mud–solidified soil increased by over 100%, the curing time was extended from 3 days to 28 days, and the unconfined compressive strength increased by approximately 70%. However, an increase in initial water content from 40% to 60% reduced the unconfined compressive strength by 50%. With the increase of cement content from 5% to 9%, the cohesion and friction angles increased by approximately 78% and 24%, respectively. The initial shear modulus under dynamic shear increased by approximately 38% and the shear strain corresponding to a damping ratio decay to 70% of the initial shear modulus decreased by nearly 11%. The compression coefficient decreased by approximately 55%. Scanning electron microscopy and X-ray diffraction tests showed that a higher cement content led to the formation of more hydration reaction products, especially an increase in the content of AlPO4. The bonding material between soil particles significantly increased, exerting a bonding and filling effect on soil particles and firmly adhering them together. Consequently, the strength of the waste mud–solidified soil increased significantly while its compressibility decreased.

Abstract: Nordic exercises aim to improve physical abilities and prevent injuries; However, it is not clear in what type of sports modalities to use it, so this study arises from the interest of ana-lyzing its effect in different sports modalities. Objective: To analyze Nordic exercises effects on the lower limbs, and their relationship with the explosive and absolute strength inherent to demands of different sports modalities (football, athletics, basketball, sport climbing, cycling and taekwondo). Method: quasi-experimental research, identifying 122 athletes (18±3 years old) from: football (n=24), athletics/speed (n=20), sport climbing (n=20), basketball (n=24), taekwondo (n=14) and cycling (n=20); classified into a control group CG (n=57) and an experimental group EG (n=65). Results: dominant absolute strength of the initial (12.4±0.51) and final (14.5±0.98) EG, in greater proportion in basketball (P= < 0.05); explosive strength of the initial (42.4±1.2) and final (45.8±1.5) EG, with a significant difference in all modalities between before and after (p≤0.05), except in cy-cling and taekwondo; no major changes were found in the GC. Conclusion: Nordic exercises are recommended as part of training to improve levels of explosive strength with emphasis on the modalities of football, basketball, athletics/speed and sport climbing, being applicable to increase absolute strength in basketball.

Aluminum wire is a common material for wire bonding due to its resistance to oxidation and low price. It does not melt when becoming a free air ball (FAB) during the electronic flame-off (EFO) process with wettability, and is applied by wedge bonding. This study used 20μm Zn-Coated Al-0.5wt.%Si (ZAS) wires to improve the FAB shape after the EFO process, while maintaining stability of the mechanical properties, including the interface bonding strength and hardness. In order to test circuit stability after ball bonding, the current-tensile test was performed. During the experiment, it was found that 80nm ZAS with wire bonding has lower resistance and higher fusing current. For the bias tensile test, the thicker Zn film diffused into the Al-Si matrix easily, after which the strength was reduced. The ball-bond interfaces had no change in their condition before and after the bias. Accordingly, ZAS could be a promising candidate for ball bonding in the future.

Wetland ecosystems provide valuable services to human beings, but they are also among the most threatened ecosystems in the world (1). Sixteen ecosystem services are identified through the South African Water Research Commission's Wet-Health Tool (2). This study sought to establish which of these ecosystem services are highly ranked/rated by the community members living in the Soutpansberg area in South Africa. This area is a strategic water source/watershed. The area is rich in biodiversity and is also experiencing competing administrative jurisdictions: the local traditional leadership and the municipal council. This study also sought to determine the influence of age, education status, employment status, and family income, among other demographic factors, on how people view the importance of services derived from wetlands. It also sought to establish whether people in urban settings view the ecosys-tem services obtained from wetlands similarly to people in rural settings. A literature review was conducted to understand the wetland ecosystem services and how communities benefit from these services. A close-ended questionnaire was used to collect data for the current study, which was circulated among the villagers around the wetlands, particularly those living close to the wetlands. One hundred and sixteen responses from the study were recorded. Food for livestock was ranked the greatest benefit or service derived from the wetlands rated by 82% of the participants, followed by the provision of cultivated foods at 60%, provision of water for human use at 58%, provision of harvestable resources at 42% and erosion control at 38% completes the top 5 ranked ecosystem services in the area. The study concluded that the participants living in rural areas had greater awareness of wetlands' ecosystem services than their urban counterparts.

Forests are increasingly becoming fragmented and declining due to natural causes and human-induced activities. The latter creates an imbalance which put the survival of vulnerable species such as those of avifauna at risk. Honeyeaters are group of birds common in Fiji, with certain species strictly confined to specific habitats. This study is an attempt to compare the abundance and foraging behaviours of three sympatric honeyeaters namely Kikau wattled honeyeater, Orange-breasted myzomela and Giant honeyeater at two contradicted sites (USP campus and Colo-i-Suva Forest Reserve). The survey was carried out using point count method along three different transect routes of approximately 2 Km on each study sites . A higher species diversity and abundance was observed in Colo-i-Suva Forest Reserve than in USP campus. Kikau wattled honeyeater are more populated at USP campus due to adequate nectar-producing plants. Whereas both Orange-breasted myzomela (highly adaptable bird species) and Giant honeyeater (forest specifics) are frequent in Colo-i-Suva Forest Reserve. All exhibited a wider range of foraging techniques across forest vertical strata and plant species, except for Giant honeyeater (not observed). The statistical analysis showed that there is a significant difference (p < 0.05) in abundance as well as between the number of honeyeater species in both sites across the forest vertical strata. However, there is no significant difference in the foraging behaviour and the number of honeyeaters found foraging on diverse plant species (p > 0.05).

The effectiveness of combining strength-specific training with endurance training to enhance the performance of endurance runners remains uncertain. This study aimed to analyze effect of practising maximum-strength (MAX), explosive strength (EXP) or both combined (COMB) on seven runners’ performance-indicators: vertical jump (VJ), one-repetition-maximum-squat (1RM), peak-velocity/peak-running-speed (PV), lactate-threshold (over incremental-test-protocols, LT), middle-distance-time-trial (TT), maximum-oxygen-consumption (VO2max), running-economy (RE). Systematic-review (Scopus, Wed of Science, Sports Discuss, PubMed) with meta-analysis was conducted following PRISMA standards. Inclusion-criteria (PICOS) were: recreational or well-trained athletes aged 18-45 performing concurrent-training ≥five-week. Used search-terms were related to different types of strength/endurance, participants’ age, sport-modality. 20 manuscripts were selected, quality-assessed with PEDro. MAX training is more effective than EXP, COMB in improving VJ, 1RM, PV, while COMB is more effective than MAX, EXP to enhance TT. MAX is more effective than EXP in improving LT. Concurrent-workouts do not provide additional benefits to VO2max. It is unknown which strength-modality (MAX, EXP or COMB) is more effective in improving RE. Concurrent-training is more effective than single-mode-endurance-training for enhancing specific performance-variables in adult-endurance-runners. Middle-, long-distance-runners may consider incorporating MAX-training to target specific goals, e.g., improving VJ, 1RM, LT, PV while utilizing COMB-training to enhance TT. Certain variables may benefit from EXP. New randomized-controlled-trials are required to confirm these findings.

ABSTRACT"In the realm of the industrial complex, a pressing concern lies in optimizing resource utilization and enhancing energy efficiency. This critical issue finds strong support from a variety of government programs, strategies, and regulatory documents. To effectively tackle this challenge and revolutionize petrochemical production, it is imperative to establish and develop innovative mechanisms. One such mechanism involves harnessing the power of automation and advanced Industry 4.0 technologies to streamline production processes. By doing so, we can unlock the full potential of these systems, driving operational efficiency, conserving valuable reserves, and propelling innovation within the petrochemical industry."The article delves into an in-depth analysis of the prominent trends in the application of the "Industry 4.0" concept within the petrochemical industry. It sheds light on the various factors that impact the efficiency of organizing production systems. Additionally, the article identifies the primary avenues that drive the advancement and enhancement of production organization practices. Moreover, the article explores the fundamental tools employed for process improvements and highlights the significance of process automation in petrochemical plants. By examining these key aspects, it aims to provide valuable insights and recommendations for leveraging Industry 4.0 technologies to optimize production processes in the petrochemical industry..The study focuses on examining and evaluating various systems and technologies that contribute to the optimization of production processes within the petrochemical industry. Specifically, it delves into the implementation and benefits of the just-in-time system, the 5S system for workplace rationalization, as well as different information systems including ERP systems and CALS-technologies. By exploring these systems and technologies, the article aims to identify the advantages of automating production processes within the petrochemical complex. This analysis will unveil the potential benefits such as improved efficiency, reduced waste, enhanced productivity, streamlined operations, and increased overall competitiveness. Through this research, we aim to shed light on the value of these automation solutions and their impact on driving the petrochemical industry towards greater success.

Background: The AWaRe tool was set up by the World Health Organization (WHO) to promote the rational use of antimicrobials. Indeed, this tool classifies antibiotics into four groups, Access, Watch, Reserve and not-recommended antibiotics. In Republic Democratic of Congo, data on antibiotic dispensing (prescribing) by health professionals according to the AWaRe classification are scarce. In this research work, we aimed to explore antibiotic dispensing pattern from health professionals according to the WHO AWaRe classification to strengthen the national antimicrobial resistance plan. Methods: For this purpose, a survey was conducted from July to December 2022 in the district of Tshangu in Kinshasa. From randomly selected drugstores, drug-sellers were interviewed and randomly selected customers attending those drugstores were included in the study for medical prescriptions collection. The prescribed antibiotics were classified into the Access, Watch, Reserve and not recommended antibiotics group and by antibiotics number by prescription among pharmacies surveyed. Results: Of 400 medical prescriptions collected, 301 (75.25%) contained antibiotics. Of 301 prescriptions containing antibiotics, 164 (164/301; 54.5%) contained one antibiotic, 117 (117/301; 38.9%) two antibiotics, 15 (15/301; 5%) three antibiotics and 5 (5/301; 1.6%) 4 antibiotics. Out of the total of 463 antibiotics prescribed, 169 (169/463; 36.5%) were from the Access group, 200 (200/463; 43.2%) from the Watch group and 94 (94/463; 20.3%) from not recommended antibiotics group, respectively. Based on the anatomical, therapeutic and chemical (ATC) classification, it can be seen that third generation cephalosporins contained 34.33% of the prescribed antibiotics, followed by penicillins 17.17%, macrolides 7.63%, aminoglycosides 7. 36% and Imidazoles 7.36%, thus accounting approximately for 74% of the classes of antibiotics prescribed. Of the 463 antibiotics prescribed, the most frequently prescribed antibiotics were Ceftriaxone (21.38%), Amoxicillin (11.01%), Gentamycin (5.61%), Amoxicillin-clavulanic acid (5 .61%), Azithromycin (4.97%) and Metronidazole (4.75%), thus accounting for approximately 54% of all antibiotics prescribed. Conclusion: These results highlight the importance of strict implementation of the national plan to combat antimicrobial resistance and the need to train health workers in the correct application of the WHO AWaRe classification.

Practically important properties of real liquids, including seawater, are their nonlinear properties, which include a nonlinear acoustic parameter, as well as cavitation strength – a rupture of the continuity of a liquid at high intensities in an acoustic wave. The manifestation of nonlinear effects is greatly facilitated by the presence of various nuclei in the liquid – gas bubbles, foreign particles, and other inclusions of various origins. For practical applications, it is important to study the properties of real liquids with inclusions in them. Due to the difficulties of measuring cavitation strength by acoustic methods, other methods are being sought. It is proposed to use an optoacoustic method associated with the use of laser radiation that causes optical breakdown - optical cavitation, that accompanied by a strong sound generation effect. The connection between optical breakdown thresholds and acoustic cavitation thresholds has been established, which can later be used to identify cavitation thresholds at high static pressures (at great depths in the sea), where the use of acoustic emitters is extremely difficult. The paper studies the bubble size distribution function in seawater, combined with studies of the acoustic nonlinearity parameter and cavitation strength at various depths. The interrelation of these characteristics for seawater is shown.

The world’s population is growing at a rapid pace, thus increasing the need for shelter, which, because of increased carbon emissions, is making our planet less inhabitable. Thus, supplementary cementitious materials (SCMs) are used to reduce the embodied carbon emissions in the building sector. Wood ash, as a replacement for cement in soil treatment, seems to be a promising material. In this study, we considered the strength, stiffness, and microstructural behavior of marine clay treated with cement and wood ash as a cement replacement. Since clay is abundant in nature, it could help stabilize waste to improve the mechanical behavior of produced composites. Portland cement (7%, 10%, and 13%) was replaced with various amount of wood ash (5% and 10%) with two different dry densities (1400 and 1600 kg/m3) and three distinct curing periods (7, 28, and 60 days). Unconfined compressive strength, direct shear, porosity, pulse velocity, x-ray diffraction, and scanning electron microscopy tests were performed on selected specimens to evaluate the structural and microstructural effect of clay–wood ash–cement interaction. The results revealed that the replacement of cement with 5% of wood ash yielded superior performance. The microstructure investigation of wood ash–cement–clay blends further showed the formation of a densified matrix with stable bonds. Furthermore, the porosity and strength properties of blends developed unique relationships, which were further confirmed by other supplementary materials and soils.

The goal of this study was to analyze the forest degradation in the Reserve for San Rafael National Park, Paraguay, during the period 2005-2019. This Reserve is one of the most important forest remnants of the Upper Paraná Atlantic Forest Ecoregion. A multitemporal analysis of degradation was carried out due to the occurrence of three disturbances: forest fires, a twister and illicit crops, using the Continuous Degradation Detection (CODED) algorithm, for which 3 factors were considered: variations due to pixel in the NDFI index values before, during and after every disturbance registered. In this context, the phenomenon with the greatest impact in terms of magnitude of degradation were the forest fires of 2005, being that year at the same time, the one that reported the highest degradation values. Secondly, there are the illicit crops established until the first semester of 2019, and lastly, the twister that occurred in 2017. Our findings demonstrate that CODED algorithm can detect multi-temporal degradation events in a Subtropical Broadleaf Forest, and the post-disturbance regeneration process after every disturbance tends to occur immediately. The response in terms of degradation-regeneration is highly variable, depending of the nature and severity of each disturbance and the vegetation recovery dynamics.

Histomorphological studies were conducted to evaluate the effects of NS-Oil (NS) on ovarian toxicity induced by cyclophosphamide in female rats. The research aimed to assess the histological changes in ovarian tissue and correlate these findings with alterations in serum gonadotropin levels. The experimental design involved three (3) experimental groups treated with cyclophosphamide, NS-Oil oil, or a combination, with control group for comparison. Histological assessments of ovarian sections were performed to analyze structural integrity, follicular development, and toxicity signs, while serum samples were analyzed for estradiol, progestin levels.Cyclophosphamide administration significantly disrupted ovarian architecture, reducing follicle count and causing follicular degeneration. Conversely, NS-Oil oil treatment exhibited protective effects, restoring normal histological features and improving gonadotropin levels. Image J software, calibrated with a table micrometer, was used to measure diameters of follicles, follicular cells, and oocytes. Primary, secondary, and tertiary follicles were classified according to Oktay et al. (2017). Body weight showed no significant difference across groups, but ovarian weight decreased in cyclophosphamide-treated groups compared to controls (p < 0.05). However, ovarian weight increased dose-dependently in NS-Oil-treated groups (p < 0.05).Cyclophosphamide reduced ovarian cortex and medulla volumes (p < 0.05), while NS-Oil treatment increased these volumes (p < 0.05). Pre-antral and antral follicle counts decreased with cyclophosphamide but increased following NS-Oil treatment (p < 0.05). Atretic follicle counts decreased in both cyclophosphamide and NS-Oil-treated groups (p < 0.05). The diameters of pre-antral and antral follicles, as well as follicular cells, decreased with cyclophosphamide but increased post NS-Oil treatment (p < 0.05).These results suggest that NS-Oil may offer a therapeutic strategy to mitigate ovarian damage associated with cyclophosphamide treatment, highlighting its potential role in preserving reproductive health in patients undergoing chemotherapy. Further investigations are warranted to elucidate the underlying mechanisms of action and the efficacy of NS-Oil in clinical settings.

Duchenne muscular dystrophy (DMD) is the most prevalent progressive muscular dystrophy, and the guidelines recommend the regular assessment of respiratory muscle function. This study aimed to assess the relationship between maximum inspiratory pressure (MIP), maximum expiratory pressure (MEP) and sniff nasal inspiratory pressure (SNIP) measurements and upright-supine spirometry parameters in children with DMD, predictability of upright-supine spirometry in terms of diaphragm involvement, and impact of nutrition on muscle strength. This prospective cross-sectional study examined patients with DMD by comparing upright and supine FVC, MIP, MEP, and SNIP measurements. Forty-four patients were included in the study. The mean patient age was 10.8±2.9 years. Twenty-five patients were ambulatory. A significant decrease in FVC, FEV1, and FEF25-75 values was detected in the supine position in both ambulatory and nonambulatory patients (p&lt;0.05). All patients had low MIP, MEP, and SNIP measurements (less than 60 cm H2O). MIP, MEP, and SNIP values were significantly lower in patients with malnutrition than in those without (p&lt;0.05). To accurately assess respiratory muscle strength, supine FVC should be combined with upright FVC, MIP, MEP, and SNIP measurements. It is crucial to regularly screen patients for malnutrition, as this can significantly affect respiratory muscle function during pulmonology follow-up.

This study checked whether vitamin D (Vit-D) supplementation improves the efficacy of resistance training (RT) in terms of increasing muscle strength and lean body mass (LBM) and influencing cardiorespiratory fitness (VO2max) in Vit-D insufficient middle-aged healthy men. Participants (n = 28) were quasi‐randomly assigned to one of the two groups, which, in a double‐blind manner, supplemented their diet daily with either Vit‐D (8000 IU; VD) or placebo (PLC) during participation in a 12‐week supervised RT program. During the intervention, serum Vit‐D concentrations increased 2.6‐fold (p < 0.001) in the VD group, while no changes occurred in the PLC group. Muscle strength gains (p < 0.001) as measured in seven exercises performed on RT equipment and increases (p < 0.001) in LBM were similar in the two groups. Total fat mass, percent total fat, and percent android fat decreased (p < 0.05) to a similar extent in both groups, but there was no change in VO2max in either group. In conclusion, in healthy Vit‐D insufficient middle-aged men engaged in resistance training, Vit‐D supplementation increases serum 25(OH)D levels but does not enhance gains in muscle strength and LBM or decreases in fat mass and fat percentage and does not affect cardiorespiratory fitness.

Background: For the treatment of bone defects, biodegradable compressive biomaterials are needed as a substitute, which degrade at the same rate as the bone regenerates. In this study, the compressive strength of CPC ceramics (with a layer thickness of more than 12 layers) should be compared with sintered ceramics. Methods: Round scaffolds with 20, 25, 30 and 45 layers were 3D printed the 3D Bioplotter, solidified in a water-saturated atmosphere for 3 days and then tested for compressive strength together with a sintered ceramic using a Zwick universal testing machine. Results: The 3D printed scaffolds are more compressive at 41.56 ± 7.12 MPa than the sintered ceramic at 24.16 ± 4.44. Conclusions: The round geometry sintered ceramics approach or exceed the upper limit of the compressive strength of cancellous bone in the direction of compacta (depending on the author).

The Limpopo estuary mangrove forest covers about 928 ha, however 382 ha remain intact and 546 ha were degraded after the 2000 floods. Mangrove replanting campaigns have been carried out at the site. This article aims to evaluate the structure and carbon pool of aboveground and belowground living biomass and soil carbon in natural and replanted mangrove forests (2016, 2014 and 2010). The methodology consisted of selecting 40 strata where structural data were collected. Living biomass above and below ground and soil carbon was obtained based on the methodology described by Kauffman and Donato (2012). The results showed that A. marina was the most observed species in all study areas. The carbon reserve of living biomass above and below ground in the natural forest was 67.9±100.9 MgCha -1 and 65.0±77.1MgC ha -1 , respectively; and in the planted forests (2016, 2014, 2010) it was 1.1±0.5MgCha-1 and 2.1±1.0MgCha-1, 1.8±1.0MgCha-1 and 3.6±2.0MgCha-1, 3.7±2.0MgCha-1 and 5.3±2.5MgCha-1 . Soil carbon reserve was 229.4±119.4 MgCha-1 in natural forest and 230.3±134.8 MgCha-1 , 234.8±132.7MgC ha-1, 229.4±119.4 MgCha-1 in planted forests (2016, 2014, 2010). The total carbon reserve in the natural forest was 362.3 MgCha-1 and in the planted forestsn(2016, 2014, 2010) it was 233.5 MgCha-1 , 240.2 MgCha-1, 246.4 MgCha-1. Natural and restored forests had similar anoumts of soil carbon, which reinforces the idea that soil is a stabel carbon pool. Morever, restored forests failed to store the same amount of live biomass (an carbon), which supports the idea that it is better to prevent habitat degradation than to restore it.

Black spot disease is associated with the breakdown of chitin by chitinolytic bacteria resulting in extensive black lesions across the body of crustaceans. Black spot is prevalent across most fished crustaceans worldwide. Severely infected individuals are rejected from the fishery resulting in financial loss to both fisher’s and seafood export and processing companies. Ecologically, populations with high infection rates may have increased mortalities resulting in fewer individuals surviving the population. The prevalence and severity of shell disease in the edible crab, Cancer pagurus, of various size classes, was assessed via scaled images taken from crabs sampled within the Berwickshire Marine Reserve, UK. A total of 22.4% of individuals across all size groups were found to contain black spot lesions. Male crabs were more commonly affected (26.21%), with more body parts showing lesions and a greater overall blackspot coverage (1.75%) than females (16.43% and 1% respectively). Crabs under the MLS (140mm) showed a significantly higher black spot coverage, but size did not significantly affect infection rates. Carapace and chelae were the most commonly affected areas. Compared to previous studies the Berwickshire Marine Reserve has a relatively low prevalence of black spot disease in Cancer pagurus.

The purpose of this paper is to provide empirical evidence to water policy-makers and the evaluation of the application of economic instruments such as price and other factors affecting demand, they contribute to improved decision-making around water management in the Biosphere Reserve El Vizcaino, Mexico. It was estimated a dynamic function with average price specification and other price perception specification. The findings show that consumers react to average price perceived and not the marginal price; long-run price elasticity is higher than short-run and both elasticities are inelastic. Elasticities inelastic with rising prices generate high incomes to improve water planning, supply quality and expand service coverage. The results suggest that the level of knowledge of users on the price is key to take into account restructuring rates in a scenario where the consumer has asymmetric information and themselves achieve goals of economic efficiency, social equity and environmental sustainability.

Background: Parity and vaginal delivery may contribute to female urinary incontinence prev-alence. The aim of this study was to evaluate the impact of parity and type of child delivery on pelvic floor muscle strength (PFMS). Material and Methods: 140 healthy women were prospectively evaluated and distributed into 4 groups: G1 (n=34) 30-40 years old; G2 (n=38) 41-50; G3 (n=35) 51-60 and G4 (n=33) over 60. De-mographic data, and body mass index (BMI) were obtained using a clinical questionnaire. Sub-jective PFMS assessments were performed using transvaginal digital palpation (TDP), and ob-jective evaluation was obtained using a portable perineometer. Results: BMI was significantly higher in G4 compared to G1. There was a positive linear rela-tionship between age and BMI. The number of pregnancies was higher in G4 compared to G2 and vaginal delivery was more frequent in G4 compared to G1 and G3. There was no statistical correlation among different groups in PFMS assessed either by TDP and perineometer. Like-wise, we did not observe any negative linear relationship between PFMS and parity or number of vaginal deliveries. Conclusion: Our data demonstrates that both the number of pregnancies and of vaginal deliv-eries had no impact on PFMS in continent women.

Steel structures, such as bridges, must be continuously maintained. Due to increasing trac loads, design and execution shortcomings, many steel bridges are subject to various types of damage, such as cracks. The bridges must be maintained by crack removal and re-welding the cracks. During this work, the bridge is closed for trac in order to suppress the crack ank movement during welding. As a result, trac loads on other routes are higher, which increases further damage on detour routes and subsequently additional welding work and costs on theses structures. Therefore, the aim is to provide a method that allows welding work on steel structures under running trac, respectively under cyclic loads. First, measurements at a representative steel bridge were conducted to derive gap opening parameters of amplitude and frequency for welding tests under cyclic loads. In a test setup for reproducible and comparable welding tests, specimen were welded under cyclic loads. Deep grinding of the root layer allowed defect-free welding within the range of 0.1 mm amplitude at a frequency of 2 Hz loadings. For such welds, the weld quality and the fatigue strength was comparable to the standard requirements.