In the proposed article, the issues of increasing the synchronizing ability of the system of coordinated rotation of asynchronous motors are considered. Based on the T-shaped equivalent circuit, electromechanical relationships were obtained with changes in the value of the total rotor resistance and the supply voltage of individual motors. An algorithm for calculating the torques, stator and rotor currents of the motors of the system has been compiled. Based on the calculations obtained, the mechanical characteristics of the system asynchronous motors are constructed for various values of total resistance, supply voltages and rotor positions. The obtained data and graphs confirm the adequacy of the theory obtained in an analytical way. Functional and structural diagrams in small scales have been compiled, which allow simulating transient operation modes of multi-motor asynchronous electric drives in the Matlab application package. Multi-motor asynchronous electric drives with adjustable supply voltages, as well as with preliminary synchronization and synchronous braking, have been developed. Compilation of a program for the stability of a nonlinear system of a multi-motor asynchronous electric drive (MAEDs) with a thyristor voltage converter (TVC) in Matlab. Also, the modes of soft start, load shedding and surge on the motor shaft are simulated, confirming the stability of the system.

Water scarcity, particularly in arid and semi-arid regions, poses a significant challenge to crop production, with drought being a prevalent factor limiting grain production globally. Enhancing agricultural water use efficiency is crucial for managing water resources effectively in these areas. Water resource management involves planning, developing, distributing, and optimizing the use of water resources. Water use efficiency management is also essential for crop growth in arid regions. Various agronomic and irrigation strategies can improve crop water use efficiency and drought tolerance. The primary goal of these strategies is to maximize irrigation efficiencies by applying the precise amount of water needed to restore soil moisture to the desired level. These sustainable practices not only reduce the cost of water and labor for farmers through reduced irrigation but also optimize the use of soil moisture storage. This review paper explores practical techniques to improve water use efficiency, highlighting the role of nutrients in enhancing water use efficiency in crop plants.

A low cost, scalable and robust process has been proposed as innovative method for coating solar mirrors with a self-cleaning, transparent in the full solar range and versatile material based on auxetic aluminium nitrides, previously obtained on the laboratory scale. This work presents the scaling-up of fabrication process from laboratory to prototypal scale and pre-liminary results of outdoor self-cleaning solar mirror prototypes testing in the demonstrative CSP plant ENEASHIP located in Casaccia (Rome) ENEA research centre. Prototypes 50x40cm have shown stability in external conditions: no degradation occurs during the test campaign. Their washing restores the initial reflectance affected by soiling and the self-cleaning performance allows the utilization of a reduced quantity of water for cleaning operations with respect to uncoated glass of back surface mirrors. A similar self-cleaning AlN coating could be utilized on other solar components affected by soiling, such as glass envelopes of heat collecting elements, PV panels and everywhere are required self-cleaning performance combined to optical ones.

Phased injection of natural gas into internal combustion marine engines is a promising solution for optimizing performance and reducing harmful emissions, particularly unburned methane, a potent greenhouse gas. This innovative practice distinguishes itself from continuous injection because it allows for more precise control of the combustion process with only a slight increase in system complexity. By synchronizing the injection of natural gas with the intake and exhaust valve opening and closing times while also considering the gas path in the manifolds, methane release into the atmosphere is significantly reduced, making a substantial contribution to efforts to address climate change. Moreover, phased injection improves the efficiency of marine engines, resulting in reduced overall fuel consumption, lower fuel costs, and increased ship autonomy. This technology has been tested on a single-cylinder, large-bore, four-stroke research engine designed for marine applications, operating in dual-fuel mode with diesel and natural gas. Performance was compared with that of the conventional continuous feeding method. Evaluation of the effect on equivalent CO2 emissions indicates a potential reduction of up to approximately 20%. This reduction effectively brings greenhouse gas emissions below those of the diesel baseline case, especially when injection control is combined with supercharging control to optimize the air-fuel ratio.

The last-mile logistics in cities have become an indispensable part of the urban logistics system. This study aims to explore the effective selection of last-mile logistics nodes to enhance the efficiency of logistics distribution, strengthen the corporate distribution image, and further reduce corporate operating costs and alleviate urban traffic congestion. This paper proposes a clustering-based approach to identify urban logistics nodes from the perspective of geographic information fusion. This method comprehensively considers several key indicators, including the coverage, balance, and urban traffic conditions of logistics distribution. Additionally, we employed a greedy algorithm to identify secondary nodes around primary nodes, thus constructing an effective nodal network. To verify the practicality of this model, we conducted an empirical simulation study using the logistics demand and traffic conditions in the Xianlin District of Nanjing. This research not only identified the locations of primary and secondary logistics nodes but also provided a new perspective for constructing the urban last-mile logistics system, enriching the academic research related to logistics node construction. The results of this study are of significant theoretical and practical importance for optimizing urban logistics networks, enhancing logistics efficiency, and promoting the improvement of urban traffic conditions.

Introduction: Transportation logistics play a pivotal role in facilitating both individual mobility and supply chain operations on a global scale. However, conventional transportation systems have contributed significantly to urban congestion and environmental degradation. In response to these challenges, there is a growing momentum towards the adoption of intelligent transportation systems (ITS) and sustainable transportation solutions. This research aims to explore the potential of renewable energy sources to power electric vehicles (EVs) and flying automobiles, thereby accelerating the transition towards a low-carbon future. Objectives: The primary objectives of this research are as follows: - Investigate the role of renewable fuels in powering both EVs and flying cars to reduce reliance on fossil fuels and mitigate carbon emissions. - Analyze the dynamic growth and sustainability implications of advancements in battery technology and alternative renewable energy sources, such as Hydrogen Fuel Cells. - Evaluate the challenges and opportunities associated with the integration of flying vehicles into existing transportation infrastructure, focusing on safety, airspace control, and infrastructure development. - Review insights and guidance to stakeholders on promoting sustainable transportation solutions for EVs and flying cars through the utilization of renewable energy sources and the reduction of carbon emissions from the literature. Methodology: This research employs a mixed-method approach, combining literature review, and causal loop diagram analysis. The literature review provides a comprehensive understanding of current trends, challenges, and opportunities in sustainable transportation and renewable energy technologies. A causal loop diagram is utilized to visualize the dynamic interactions between various factors influencing the adoption of EVs and flying cars, including technological advancements, policy interventions, and market dynamics. Results and Discussion: The findings of this research highlight the significant potential of renewable energy sources, such as solar, wind, and hydrogen, in powering both EVs and flying cars. Advances in battery technology and hydrogen fuel cells are identified as key drivers in accelerating the transition towards sustainable transportation systems. However, challenges remain in terms of infrastructure development, safety regulations, and airspace management for flying vehicles. Nevertheless, there is a noticeable advancement in reducing carbon emissions and reliance on fossil fuels with the widespread adoption of EVs. By harnessing renewable energy and implementing effective policy measures, stakeholders might able to promote the widespread adoption of sustainable transportation solutions, thereby contributing to environmental protection and societal well-being. Conclusion: Literally, this research underscores the importance of sustainable transportation solutions in addressing urban congestion, environmental pollution, and energy security concerns. By leveraging renewable energy sources and embracing technological advancements, such as EVs and flying cars, stakeholders pave the way for a more sustainable and resilient transportation system. However, concerted efforts are needed to overcome existing challenges and ensure the successful integration of these technologies into existing infrastructure. Through collaborative partnerships and innovative initiatives, a low-carbon future for transportation logistics can be achieved, benefiting both the environment and society as a whole.

Driven by the growing interest of the scientific community and the proliferation of research in this field, cranial implants have seen significant advancements in recent years regarding design techniques, structural optimisation, appropriate material selection and fixation system method. Custom implants not only enhance aesthetics and functionality but are also crucial for achieving proper biological integration and optimal blood irrigation, critical aspects in bone regeneration and tissue health. This research aims to optimize the properties of implants designed from triply periodic minimal surface structures. The gyroid architecture is employed for its balance between mechanical and biological properties. Experimental samples were designed varying three parameters of the surface model: cell size, isovalue and shape factor. Computational simulation tools were used for determining the relationship between those parameters and the response variables: the surface area, permeability, porosity and Young modulus. These tools include computer aided design, finite element method and computational fluid dynamics. With the simulated values, the corresponding regression models were fitted. Using the NSGA-II, a multi-objective optimisation was carried out, finding the Pareto set which includes surface area and permeability as targets, and fulfil the constraints related with the porosity and Young modulus. From these non-dominated solutions, the most convenient for a given application was chosen, and an optimal implant was designed, from a patient computed tomography scan. An implant prototype was additively manufactured for validating the proposed approach.

Procurement plays a central and defining role in the efficiency of supply chains. In recent years, the understanding and practice of procurement management have changed significantly due to increasing emphasis on and demand for agility and sustainability within supply chain management systems. Meanwhile, traditional supply chain systems, characterized by siloed processes, limited visibility, and inefficiencies due to manual interventions, can no longer cope with the current dynamic market conditions. Besides, the increasing requirements of sustainability, ethical sourcing, and environmental impact have intensified, making more responsible, transparent, and traceable procurement practices unnegotiable requirements for modern systems. In this paper, we examine the potential of emerging technologies and innovations such as blockchain, artificial intelligence, and the Internet of Things (IoT) in filling these gaps within the supply chain systems of enterprises in the US. The study employs a comprehensive review of relevant literature and case studies to discover and provide insights on how these technologies can improve procurement processes, optimize resource allocation and utilization, and improve sustainability. The findings of this study highlight the need for stakeholders to embrace technological advancements to effectively navigate the dynamic landscape of supply chain management.

The decarbonization of the electricity grid as one among the actions to reduce fossil fuel emissions, and thus their impact on global warming in the future, will be achieved mainly via the integration and widespread diffusion of renewable power sources. This is going to be supported also by the shift from the paradigm production-transmission-distribution, where electricity production oversees large-size power plants, to renewable-based distributed/diffused production, where electricity is generated very close or even by the same (group of) user(s) (or prosumers in the latter case). The number of mid-/small-size installations based on renewable energy technologies will therefore increase substantially, and the related renewable generation will be dominant against that from large-size power plants. Unfortunately, this will reduce the reliability of the grid very likely, unless appropriate countermeasures are taken/implemented, hopefully at the same time the paradigm shift is being achieved. To this aim, it is important to identify the anomalies and main fault causes that might determine in renewable-based power systems. This paper surveys the current state-of-the-art on anomalies and faults affecting wind-PV-storage hybrid power systems, i.e., the main renewable technology ensemble that will establish the future grid, and highlights possible research directions that may help to fill the literature gaps.

The effects of climate change health impacts on urban health care systems and vulnerable populations are a researched topic with foundations on urban risk management, urban health methodologies, and sustainable urbanization. As climate change is a dynamic and transformative global issue the gap between adaptation and mitigation efforts and urban planning relies, among other things, in the limitations of previous studies of risk management structures tailored to the existing strategy to calculate the uncertainties and predict their influence on urban systems and subsystems. Moreover, as climate and health is a well-researched issue, it is also complex as the methodologies and strategic approach to minimize health risks of climate change is intrinsically contingent to risk methodologies and policy-making processes that are efficient with support of knowledge-based information. This paper emphasis the need for focusing on urban health risk management methods that serves to identify potential opportunities, and then manage and take action to prevent adverse health effects. It also emphasizes the probability of events and their consequences, which are measurable both qualitatively and quantitatively.

Diacylglycerol kinase (DGK) is a lipid kinase that phosphorylates diacylglycerol (DAG) to generate phosphatidic acid (PA). Based on converting one important signaling molecule (DAG) to another (PA), DGK plays an important role in plant responses to abiotic stress including waterlogging stress. However, no studies have been reported on the characterization of the DGK gene family in the waterlogging-tolerant kiwifruit germplasm, Actinidia valvata Dunn. Here, we identified 18 AvDGK genes in the A. valvata genome. The phylogenetic analysis showed that AvDGKs can be classified into three clusters, and members within the same cluster have similar domain distribution, exon-intron structures and conserved motif compositions. Chromosome localization analysis revealed that all the AvDGK genes are located across 18 different chromosomes. There were 29 duplicated gene pairs in kiwifruit and all had undergone purifying selection during evolution. Promoter cis-element analysis revealed that the cis-elements within AvDGK genes are associated with multiple functions, including phytohormone signal transduction, stress response, and plant growth and development. The expression pattern analyses indicated that AvDGK play an important role in the fruit development and plant response to waterlogging stress. AvDGKs gene family in the tetraploid A. valvata genome might promote PA synthesis and subsequent signal transduction both under short-term and long-term waterlogging stress. These results provide information regarding the structural characteristics and potential function of DGK genes within kiwifruit and lay a fundamental basis for further research into breeding for enhancing the kiwifruit’s tolerance to waterlogging stress.

CAMx-LPiG (Comprehensive Air Quality Model with Extensions – Linear Plume in Grid) is an online hybrid model, based on the Chemistry and Transport Model (CTM) CAMx, that includes a sub-grid scale module to simulate the dispersion of linear road traffic emissions, called LPiG. LPiG is a plume in grid module specifically developed by extending the capabilities of the Lagrangian puff sub-grid model available in CAMx. The online integration of the local scale model within the Eulerian CTM allows for a multiscale simulation of air quality from the regional scale to the urban scale, preserving a coherent description of the chemical state of the atmosphere at all spatial scales and avoiding any double counting of the emissions simulated by the sub-grid module. In this work the model is presented and evaluated against measured NO2 concentrations for the city of Milan for the month of January 2017. The model is able to introduce road traffic induced gradient in NO2 concentration at sub-grid resolution. Moreover, CAMx-LPiG is shown to reduce the bias compared to CAMx stand-alone simulations.

This study examined the status of Education for Sustainable Development (ESD) practices and the understanding of Sustainable Development (SD) among Saudi kindergarten teachers in a specific governorate. Two hundred twenty-seven kindergarten teachers participated, and data was collected through a questionnaire. The results indicated that most kindergarten teachers (89.9%) were unaware of SD. The overall status of ESD practices among the participating teachers was weak, with an average score of 2.60 out of 4. Among the different dimensions, values (2.74), competencies (2.69), and practice (2.65) obtained relatively higher scores, while the content dimension (2.49) received the lowest score. Significant differences were found in the mean scores of ESD practices based on teachers’ qualifications and the type of school. However, no differences were observed based on experience. The lack of awareness regarding SD emerged as the primary barrier to implementing ESD in kindergarten institutions. Expanding teacher training was identified as the most crucial step in promoting ESD in kindergartens. The findings highlight the importance of raising awareness among Saudi kindergarten teachers about SD, providing professional development opportunities to enhance ESD implementation in classrooms, and creating teaching materials aligned with ESD principles.

Our study reviews the significance of archaeological parks in the tourism sector, with a specific focus on how digital presence and visitor feedback impact their cultural and touristic appeal. Utilizing statistical analyses such as regression and cluster analysis on data sourced from both Hungarian and Western European parks, the research scrutinizes TripAdvisor and Google ratings, alongside the volume of photographs and reviews. The findings highlight a modest correlation between digital visibility and overall visitor ratings, underscoring the complex relationship between online engagement and the quality of visitor experience. Notably, the cluster analysis identified two distinct groups, signifying diverse levels of visitor engagement and digital visibility across the parks. The conclusions drawn advocate for a comprehensive strategy to enhance visitor experiences, emphasizing the integration of digital engagement with the promotion of the parks cultural and historical values. By exploring the influence of digital presence on the appeal of archaeological parks, our study sheds light on the evolving interface between urban studies and digital heritage, highlighting how digital tools and online platforms are becoming increasingly integral in shaping the perceptions and experiences of urban cultural sites.

This study aims to summarize the literature on sustainable global supply chain management so that researchers and practitioners can see the trends in the area in a single place. Systematic literature review (SLR) or Content analysis is used as a methodology of this literature review, studies that are published within the time frame of 2010 to 2020 are included in this literature. Dimensions to analyze each article includes; year of publications, methodology of research, data collection type, unit of analysis, industry, a country in which data is being collected, respondents’ types, the theory that is used in the study, dimensions of the sustainability and finally the purpose of study either it is to test the already existing theory or building up a new theory. I found that sustainable global supply chain management is an emerging field and there is potential in the area for researchers to explore the area.

Long term Precipitation and temperature variations are one of the main determinants of climate variability of one’s area. The aim of this study is to determine trends variation in climatic elements of temperature and precipitation in the southern zone of Tigray regional state, Ethiopia. The station is assumed for the study of climatic records over southern zone of the region in detection for probable trends. The daily, monthly and annual precipitation totals and temperature observed at korem meteorological station were used for the period of 1981-2010 for Precipitation and 1985 – 2010 for minimum and maximum temperature. Summary of descriptive statistics and Mann Kendall test methods were employed for the observed data analysis to demonstrate any existence of possible trends. The main findings of the study indicated that the mean and maximum temperature had a general increasing trend; however, minimum temperature showed decreasing trend. In general annual temperature from 1985 – 2010 of the area showed a warming trend. Moreover analysis of the 30 years (1981-2010) annual precipitation showed a coefficient of variation ranging from 33.77 – 233 %. It indicated that the precipitation dissemination is not normal with large year to year variances.

With buildings accounting for a significant portion of global energy consumption and greenhouse gas emissions, the application of artificial intelligence (AI) holds promise for enhancing sustainability in the building lifecycle. This systematic literature review addresses the current understanding of AI's potential to optimize energy efficiency and minimize environmental impact in building design, construction, and operation. A comprehensive literature review and synthesis were conducted to identify AI technologies applicable to sustainable building practices, examine their influence, and analyze the challenges of implementation. The review was guided by a meticulous search strategy utilizing keywords related to AI application in sustainable building design, construction, and operation. The findings reveal AI's capabilities in optimizing energy efficiency through intelligent control systems, enabling predictive maintenance, and aiding design simulation. Advanced machine learning algorithms facilitate data-driven analysis and prediction, while digital twins provide real-time insights for informed decision-making. Furthermore, the review identifies barriers to AI adoption, including cost concerns, data security risks, and challenges in implementation. AI presents a transformative opportunity to enhance sustainability in the built environment, offering innovative solutions for energy optimization and environmentally conscious practices. However, addressing technical and practical challenges will be crucial for the successful integration of AI in sustainable building practices.

Sustainable manufacturing practices are becoming increasingly necessary due to the growing concerns regarding climate change and resource scarcity. Consequently, material recycling technologies have gradually become preferred over conventional processes. This study aimed to recycle waste polylactic acid (PLA) from household-disposed cups and lids to create 3D-printed parts and promote sustainable manufacturing practices. To achieve this, the current study utilised virgin and post-consumer PLA (sourced from household waste) blends. The PC-PLA wastes were shredded and sorted by size with the aid of a washing step, resulting in a filament with a 1.70 ± 0.5 mm diameter without fragmentation or dissolution. A 50:50 wt.% blend of virgin PLA (vPLA) and PC-PLA was selected as the standard recycling percentage based on previous research and resource conservation goals. The study investigated the impact of three 3D printing parameters (layer height (LH), infill density (I), and nozzle temperature (NT))on the quality of 3D-printed parts using a three-level L9 Taguchi orthogonal array. The findings revealed that blending PC-PLA with vPLA led to significant improvements in the tensile, flexural, and impact strengths by 18.40%, 8%, and 9.15%, respectively, compared to those of recycled PLA. This conclusion was supported by the investigation of the fracture surface area, which revealed fractographic features associated with printing parameters, such as plastic deformation and interfilament debonding. An ANOVA analysis revealed a positive influence of larger layer height and high nozzle temperature on the mechanical properties. Subsequently, the optimal printing parameters (LH: 0.3 mm, I: 100%, and NT: 215 °C) were determined using the S/N ratio, and a confirmation test using the optimum printing parameters exhibited a strong correlation with statistically predicted outcomes. Finally, the study used optimum printing parameters to fabricate 100% post-consumer recycled PLA 3D printed parts, demonstrating their potential for low-strength applications. Based on these findings, it can be concluded that virgin and post-consumer recycled PLA blended filament for fabricating 3D printed components is an effective way to support plastic recycling in the context of a circular economy.

The Energy Performance of Buildings Directive 2010 calls for the Nearly Zero Energy Standard for new buildings from 2021 onwards: Buildings using “almost no energy” are powered by renewable sources or energy produced by the building itself. For residential buildings, this ambitious new standard has already been reached. But for other building types this goal is still far away. The potential of these buildings to meet a Nearly Zero Energy Standard was investigated by analyzing ten case studies representing non-residential buildings with different uses. The analysis shows that the primary characteristics common to critical building types are a dense building context with a very high degree of technical installation (such as hospital, research and laboratory buildings). The large primary energy demand of these types of buildings cannot be compensated by building and property-related energy generation including off-site renewables. If the future Nearly Zero Energy Standard were to be defined with lower requirements because of this, the state related properties of Bavaria suggest that the real potential energy savings available in at least 85% of all new buildings would be insufficiently exploited. Therefore, it would be useful to instead individualize the legal energy verification process for new buildings to distinguish critical building types such as laboratories and hospitals.

The exponential growth of population and the consistent food demand has compelled humanity to seek alternatives to traditional farming and innovative technologies to increase production. Exploring offshore for natural resources and alleviating pressure on land has been an ongoing research field, especially in the energy and aquaculture sector. However, the idea of floating farming is still in its infancy and requires significant innovations. The work presented here shed further light on this area by proposing a comprehensive model of ‘Integrated, multicultural, Multileveled Floating Farm (MFF).’ Various aspects of planning, design, constructions and operations of such MFF are discussed. An integrated waste management system is proposed to improve sustainability. The conceptual design and associated financial analysis demonstrated that such integration of various modes of farming could be profitable and sustainable at the same time. The cost estimation and profit analysis are presented in the context of Singapore, and a conservative approach is followed for the calculation. However, the model can easily be extended for application in other countries.

In this study, the causal-effect between carbon dioxide emissions and forestry production and trade was investigated in Ghana by employing a data spanning from 1961 to 2014 by using the VECM and ARDL model. Evidence of the long-run equilibrium relationship in the VECM shows that, a 1% increase in veneer sheet production reduces carbon dioxide emissions by 1.47% in the long-run. There was evidence of a bidirectional causality between carbon dioxide emissions and veneer sheet production, carbon dioxide emissions and wood charcoal production, and a unidirectional causality running from carbon dioxide emissions to wood fuel production and plywood production to carbon dioxide emissions. Evidence from the long-run equilibrium relationship in the ARDL model shows that; a 1% increase in plywood production will increase carbon dioxide emissions by 0.17% in the long-run, a 1% increase in sawnwood production will increase carbon dioxide emissions by 0.17% in the long-run, a 1% increase in wood charcoal production will increase carbon dioxide emissions by 0.36% in the long-run and a 1% increase in wood fuel production will increase carbon dioxide emissions by 0.37% in the long-run.

In this study, an attempt was made to investigate the Kenya case of multivariate causality of carbon dioxide emissions by employing a time series data spanning from 1961-2011 using the ARDL method of cointegration analysis. The long-run elasticities show that, a 1% increase in financial development increases carbon dioxide emissions by 0.28%, a 1% increase in GDP per capita increases carbon dioxide emissions by 1.32% and a 1% increase in urbanization decreases carbon dioxide emissions by 1.14%. There was a unidirectional causality running from financial development, food production index, GDP per capita, industrialization and urbanization to carbon dioxide emissions. The innovation accounting shows that 20% of future shocks in carbon dioxide emissions are due to fluctuations in financial development, 9% of future shocks in financial development are due to fluctuations urbanization and 22% of future shocks in food production index are due to fluctuations in carbon dioxide emissions.

Sustainable supply chain management (SSCM) represents a critical strategy for the electronics industry to balance economic objectives with environmental and social responsibility across complex global production networks. This multiple case study analysis investigates SSCM integration within leading Korean electronics manufacturers Samsung, LG, and Hyundai. In-depth qualitative data, focus groups, and sustainability report analysis reveals the policies, practices, results and implementation barriers related to incorporating sustainability criteria across procurement, manufacturing, distribution and recycling functions. Findings show sustainability considerations increasingly driven by cost, risk, reputational and regulatory factors, with vertical coordination initiatives helping transfer knowledge to assist suppliers on compliance and emissions reductions. Yet substantial obstacles persist around monitoring, coordination, transparency and technical capabilities, especially amongst lower tiers. The paper discusses how common reporting standards, ethical sourcing certification and partnerships can accelerate electronics supply chain sustainability. By mapping integration achievements and gaps, this study informs managerial best practices and policy reforms toward promoting socially and ecologically responsible models for Korea's vital export industry as it navigates rising stakeholder pressures.

The focus of this paper is on supply chain strategy formulation. A conceptual theory approach is used for investigating and identifying the relationship between multiple elements, dimensions, forces and factors that influence and affect the supply chain strategy formulation in Greenfield context, specific to the slate mining industry. The research study involved secondary data review and series of 20 qualitative interviews, followed by 2 group discussions, one with mining and transportation experts external to the supply chain and one group discussion with supply chain internal experts. Through critical analysis, a number of problems emerge and the process of addressing these problems, results in a new framework for evaluating the relationship between business and supply chain strategy, specific to Greenfield project and integration design context.

Behavior analysis is a widely used non-invasive tool in the practical production routine, as the animal acts as a biosensor capable of reflecting its degree of adaptation and discomfort to some environmental challenge. Predominantly, conventional statistics use occurrence data for behavioral evaluation and well-being estimation, disregarding the temporal sequence of events. The Generalized Sequential Pattern (GSP) algorithm is a data mining method that identifies recurrent sequences that exceed a user-specified support threshold, whose potential has not yet been investigated for broiler chickens in enriched environments. Enrichment aims to increase environmental complexity with promising effects on animal welfare, stimulating priority behaviors and potentially reducing the deleterious effects of heat stress. The objective was to validate the application of the GSP algorithm to identify temporal correlations between heat stress and the behavior of broiler chickens in enriched environments through proof of concept. Video image collection was carried out automatically for 48 continuous hours, analyzing a continuous period of seven hours, from 12:00 PM to 6:00 PM, during two consecutive days of tests for chickens housed in enriched and non-enriched environments under comfort and stress temperatures. Chickens at comfort temperature showed high motivation to perform the behaviors of Preening (P), Foraging (F), Lying down (Ld), Eating (E), and Walking (W) whose sequences <{Ld,P}>; <{Ld,F}>; <{P,F,P}>; <{Ld,P,F}> and <{E,W,F}> were the only ones observed in both treatments. All other sequential patterns (comfort and stress) were distinct, suggesting that environmental enrichment alters the behavioral pattern of broiler chickens. Heat stress drastically reduced the sequential patterns found at the 20% threshold level in the tested environments. The behavior of lying laterally "Ll" is a strong indicator of heat stress in broilers and was only frequent in the non-enriched environment, which may suggest that environmental enrichment provides the animal with better opportunities to adapt to stress-inducing challenges, such as heat.

The effective implementation of a sustainable supply chain leadership (SSCL) strategy at each organization’s level, positively impacts on corporation’s competitive advantage and sustainable development. While fears have been acknowledged in previous literature, the benefit of designing Sustainable supply chain models for operational excellence and sustainable development is a noteworthy exploration. The study collected statistical data using an online Survey- monkey questionnaire from 46 of the top 100 JSE-listed companies with the intention to elucidate the large firms’ transition from longstanding linear approaches to sustainable production and consumption to a more circular approach. A bivariate data analysis was used to generate the results in SPSS. The results indicate a positive contribution of SSCL strategy to operational excellence and sustainable development of large corporations if only the entire supply chain system is well-coordinated and implemented. This study makes a vital contribution by proposing a new SSCL model for fast-tracking corporate sustainability and enhancing corporate contributions to sustainable growth.

This research analyzes the phenomenon of the reduction of urban green spaces in the post-socialist city. Belgrade was selected as a post-socialist city of the former Yugoslavia. The article analyses the views of urban planners on the reasons for the reduction of urban green areas in the post-socialist city based on semi-structured interviews with representative samples for urban areas. This result research confirms the hypothesis that post-socialist city planning reduces urban green areas due to the lack of new mechanisms in documents for the planning of urban green space. The concept of sustainability should connect and balance the skills of urban planners and focus on how urban planners develop and apply standards and protect them in market-democratic systems. In other words, a new mechanism of post-socialist city planning implies a balance between the private and public sectors. In the planning document, urban planners should find a common denominator between the public interest, citizens, investors, and spheres determined by the sustainable principles of the development. City institutions should provide opportunities for the application of those standards. With the new approach, planning would imply work in the service of citizens in the concepts of a sustainable and green city.

This qualitative study explores consumer responses to sustainable supply chains and green marketing strategies, aiming to uncover insights into consumer behavior, perceptions, and attitudes towards sustainability in the marketplace. Through semi-structured interviews and focus group discussions with 30 participants, the study examines key factors influencing consumer trust in green marketing claims, barriers to adopting sustainable products, generational differences in attitudes towards sustainability, and the impact of social media on consumer perceptions. Findings reveal that consumers value transparency and credibility in green claims, preferring products certified by trusted third parties and companies that demonstrate transparent supply chain practices. Higher pricing, concerns about product effectiveness, and limited availability emerged as significant barriers to consumer adoption of sustainable products, highlighting the need for cost competitiveness and increased market accessibility. Generational cohorts, particularly Millennials and Generation Z, exhibit strong inclinations towards sustainability-driven behaviors, shaping market trends towards ethical consumption practices. Social media plays a pivotal role in influencing consumer perceptions, disseminating information about sustainability, and fostering engagement with environmental issues. The study underscores the importance of clear communication, consumer education, and supportive regulatory frameworks in promoting sustainable consumption behaviors. Practical implications include recommendations for businesses to enhance transparency, innovate sustainable products, align with consumer values, leverage social media platforms, and advocate for regulatory measures that uphold environmental standards. By addressing these insights, businesses and policymakers can effectively meet consumer expectations and contribute to sustainable development goals in the global marketplace.

There are two purposes for this article. The first purpose is to perform a reiew of previous research on global supply chain management (GSCM) principles that can adapt and survive adversity, such as the COVID-19 pandemic. The second purpose is to put forth a conceptual framework for the GSCM that is sustainable in the event of future turbulence similar to that experienced during the COVID-19 pandemic. With regard to the issues raised, the article posits the following questions. Is there, perhaps, a sustainable post-COVID-19 pandemic GSCM? Can the COVID-19 pandemic-related international logistics system (GSC) turbulences be predicted with certainty using these sustainable post-COVID-19 pandemic GSCM concepts? Putting it all together, the paper concludes that, while debatable, sustainable GSCM is feasible and can be accomplished utilizing JIT, supply chain mitigation, and supply chain visibility, as demonstrated by the manufacturing firms referenced in the article.

In this work, zinc oxide (ZnO)/ granular activated carbon (GAC) composites at different ZnO concentration (0.25M-ZnO@GAC, 0.5M-ZnO@GAC, and 0.75M-ZnO@GAC) were prepared by an in-situ hydrothermal method and demonstrated synergistic photocatalytic degradation and ad-sorption of Rhodamine B (RhB). The thermal stability, morphological structure, elemental com-position, crystallographic structure, and textural properties of developed catalysts were charac-terized by thermal gravimetric analysis (TGA/DTG), scanning electron microscopy equipped with energy dispersive-x-ray (SEM-EDS), x-ray diffraction (XRD), and Brunauer–Emmett–Teller (BET) analysis. Successful loading of ZnO onto GAC was confirmed by SEM-EDS and XRD analysis. The BET surface areas of GAC, 0.25M-ZnO@GAC, 0.5M-ZnO@GAC, and 0.75M-ZnO@GAC were 474 m2/g, 450 m2/g, 453 m2/g, and 421 m2/g, respectively. The decrease in GAC could be attributed to the successful loading of ZnO on the GAC surface. Notably, 0.5M-ZnO@GAC exhibited the best photocatalytic degradation efficiency of 82% and 97% under UV-A and UV-C light over 120 min, attributed to improved crystallinity and visible light absorption. The photocatalytic degradation parameters revealed that lowering the RhB concentration, raising the catalyst dosage and pH be-yond the point of zero charge (PZC) would favor the RhB degradation. Photocatalytic reusability was demonstrated over 5 cycles. Scavenger tests revealed that the hydroxyl radicals (•OH), su-peroxide radicals (O2−•), and photoinduced hole (h+) radicals play a major role during the RhB degradation process. Based on the TOC results, the RhB mineralization efficiency of 79.1% was achieved by 0.5M-ZnO@GAC. Additionally, GAC exhibited a strong adsorptive performance towards RhB with adsorption capacity and RhB removal of 487.1 mg/g and 99.5% achieved within 90 min equilibrium time. The adsorption characteristics were best described by pseu-do-second-order kinetics, suggesting chemical adsorption. This research offers a new strategy for the development of effective photocatalyst materials with potential for wider wastewater treat-ment applications.

Probiotics are becoming more and more popular in the growing of fin and shellfish because these species are consumed worldwide and because different techniques are employed to maximize the productivity and efficiency of fin and shellfish. Probiotic Bacillus is one of the many types of probiotics that are used, but it stands out due to its superior qualities. For instance, because of its ability to sporulate, it can survive in harsh environments, produce antimicrobial substances, and is safe to feed to fish. The different species of Bacillus used in the farming of fin and shell fish were discussed in this review, along with the benefits of using Bacillus spp. as a good substitute in sustainable aquaculture to improve feed utilization, immune system response, stress adaptation, resistance to infectious diseases, tissue preservation integrity, and water quality. Additionally, we discussed the possible risks to safety that Bacillus poses when raising these significant species. For the purpose of future research and development regarding Bacillus application in aquaculture, a summary of the findings of recent studies about the advantages of applying Bacillus to enhance fin and shellfish aquatic animal culture has been provided.

The present study analyzes students' weather-related hazard and risk literacy in Greece, a climate change hotspot region in the Eastern Mediterranean. In this context, we examine the students' level in two core literacy variables, namely knowledge and competency. In addition, we explore how knowledge, attitudes and socio-demographic variables influence students' competencies related to weather and climate risk assessment and adaptability. A questionnaire-based survey was conducted on 474 students aged 12-16. The regression results showed that knowledge significantly affects the level of competency. Self-belief and confidence in science were the most influential among the attitudinal variables. We conclude by discussing educational and behavioural issues highlighted as essential to address with targeted policies and measures in formal education complemented by non-formal educational activities.

This study investigates green logistics strategies adopted by businesses to enhance sustainability within their supply chains, particularly focusing on reducing carbon footprints and environmental impacts associated with transportation and distribution activities. Through qualitative analysis and interviews with supply chain managers, industry experts, and sustainability officers, this research provides insights into motivations, strategies, challenges, and benefits related to green logistics practices. Key findings highlight the critical role of aligning green logistics with corporate sustainability goals. Advanced technologies such as telematics, GPS tracking, and data analytics are instrumental in optimizing transportation routes, reducing fuel consumption, and minimizing emissions. Additionally, strategies like using eco-friendly vehicles, energy-efficient warehouse operations, and implementing reverse logistics are identified as effective means to mitigate environmental impacts. Collaboration and partnerships with suppliers, logistics providers, and stakeholders are essential for sharing best practices and fostering joint initiatives. Despite benefits such as cost savings and enhanced corporate reputation, challenges include high initial investments, the absence of standardized metrics for environmental impact, and regulatory complexities. However, regulatory compliance also acts as a driver for green logistics adoption and presents opportunities for improving sustainability performance. The integration of sustainability goals with logistics strategies underscores the interdisciplinary nature of sustainable supply chain management. This holistic approach encompasses aspects of entrepreneurship, emotional intelligence, marketing, and supplier relationship management.

This study investigates the pivotal role of leadership in driving sustainable supply chain initiatives (SSCI), highlighting the multifaceted ways through which leaders influence the successful integration and implementation of sustainability practices within supply chains. Using a qualitative approach, the research involved semi-structured interviews with leaders and managers from diverse industries, complemented by document analysis and thematic analysis to capture the complexities of leadership in SSCI. The findings reveal that visionary leadership, characterized by a clear and compelling sustainability vision, plays a crucial role in aligning organizational goals with sustainable practices, inspiring collective action, and fostering a shared commitment to long-term environmental and social objectives. Stakeholder engagement emerged as a critical factor, with leaders who prioritize open communication and collaboration successfully building trust, leveraging expertise, and co-creating innovative solutions to sustainability challenges. Additionally, the study highlights the importance of fostering a culture of innovation, where leaders support experimentation, risk-taking, and the adoption of new technologies and processes that enhance sustainability. Ethical leadership, emphasizing integrity, transparency, and accountability, is identified as essential for gaining stakeholder support and reinforcing the legitimacy of SSCI. Furthermore, the integration of sustainability into organizational culture, driven by leadership, is crucial for aligning individual and organizational behaviors with sustainability goals. The ability of leaders to navigate challenges, adapt to global supply chain complexities, and utilize robust sustainability metrics is also emphasized as key to sustaining SSCI. The study concludes that effective leadership is integral to the success of SSCI, offering valuable insights for organizations aiming to enhance their sustainability performance and contributing to the broader understanding of leadership’s role in sustainable supply chain management.

The term sustainable energy is very familiar to all of us yet its exact definition or meaning has so far been vague. To date the widely adopted definition of sustainable energy has been inspired by the definition of sustainable development formulated more than 30 years ago in the Our Common Future - the UN’s Report of the World Commission on Environment and Development. The current definition conceals the true spirit of the Report and this has some ramifications. It raises the question as to whether we have put too much emphasis on attaining the future dimension of sustainability in the middle of the situation where the energy survivability is in fact the real issue in many parts of the world. In this paper the role of energy in sustaining livelihoods of low income communities is discussed. Existing definition of sustainable energy that the whole world seems to have embraced is looked at critically and its downsides exposed. The identified pillars of sustainable energy and the associated issues is discussed and the need for an additional pillar, i.e. affordability is discussed and called for. This paper will argue that global definition of sustainable energy seems inappropriate and should be jettisoned and a more realistic definition should be formulated, adopted and embraced at local (i.e. national or regional) level taking into account local attributes and factors. The current push for a transition from the reliance on conventional energy sources to ‘cleaner’ energy sources (generally associated with renewable energy) has further exacerbated the issue of energy affordability that has made the conditions even more dire for so many groups of the world population. In the midst of this situation, those who push for a rushed energy transition seem to be those who also produce unsustainably high carbon footprint but who can easily offset their carbon foot-print through the ‘net-zero’ concept.

This research project focuses on the optimization of the hybrid energy system together with the assistance of thin-film coatings aiming to achieve self-sustainable food and crop storage facilities which will run effectively with its own generated energy. An infrastructure will be designed and constructed that will comprise a hybrid power generation system accompanied by thin-film coated semitransparent and non-transparent construction materials for energy saving. Thin-film low emissivity (Low-E) type coatings will assist the transparent or semitransparent construction materials to reflect most of the infrared (IR-mostly heat) and UV spectra of sunlight without interrupting the visible spectrum and will lead to saving energy consumption by reducing the heat and lighting during day time

Faba bean is an important legume crop wordwide, grown both for food and feed. As for many legume crops, postemergence weed control is difficult. The aim of this work was to assess potential of intercropping on weed management by assessing the effect of mixing faba bean with different crops (wheat, barley, and pea) on weeds in the South of Spain. Four field trials were conducted over four consecutive seasons, and results found that addition alternate intercropping of faba bean and barley achieved high levels of weed control, both for coverage and biomass (92.7% and 76.6%, respectively). Intercropping with wheat did not reduce weed coverage but did decrease weed biomass by 46.1% as compared to faba bean monocrop. Intercropping with pea did not provide significant reductions for weed coverage neither for weed biomass. The diversity of the weed community was not altered by the different crop combinations tested. Additional experiments under controlled conditions were carried out to determine a possible role of barley allelopathy in weed suppression. A strong allelopathic effect entailing a reduction in the number of plants and biomass was detected for four weeds: Sinapis arvensis, Polypogon monspeliensis, Matricaria camomilla, and Medicago trucatula. It can be concluded that intercropping faba bean with barley is an excellent strategy for weed control in the Southern Spain.

Transforming Small-Scale LNG Business, Enhancing Efficiency and Resilience in an Evolving Supply Chain In various industries, innovative systems have proven their value due to their efficiency and adaptability. A prime example of this lies in the rapid growth of the liquefied natural gas (LNG) market. LNG, a fuel derived from natural gas, has gained significant traction in recent years. In light of this, we aim to explore optimal strategies for small-scale LNG businesses, with a focus on revolutionizing their supply chain to ensure adaptability and sustainability. Our objective is to enhance efficiency and sturdiness in this evolving sector. By devising innovative methods and implementing cutting-edge technologies, we aim to revolutionize the small-scale LNG market, paving the way for a more optimized and resilient supply chain. Through this transformation, we strive to create a sustainable and adaptable framework that will drive the growth and success of a small-scale LNG businesses.LNG' ability to be transported and stored more cost-effectively in its reduced volume compared to natural gas in its original state is a significant advantage. The distribution network for LNG starts at numerous supply terminals and extends to a diverse range of consumption centers, each with varying tank capacities. In the broader economic context, the establishment of efficient routes for LNG Truck tank plays a critical role.To tackle the challenge of selecting a pickup location and determining optimal destinations with specific unloading volumes for liquefied natural gas (LNG), this research presents an innovative solution utilizing state-of-the-art machine learning techniques. The proposed approach combines the power of reinforcement learning, recurrent neural networks, online learning, and graph theory. By leveraging these cutting-edge techniques, we aim to develop an intelligent system that can effectively determine the most efficient pickup location and sequence of destinations for LNG delivery. This system will take into account various factors such as transportation costs tank capacity, and demand fluctuations. Through the integration of reinforcement learning, the system will continuously learn and improve its decision-making process in real-time. The recurrent neural networks will allow for the analysis of historical aim to model and optimize the complex network of pickup and delivery routes, considering factors such as distance, capacity constraints, and operational efficiencies. With this innovative approach, we strive to revolutionize the selection and planning process for LNG pickup and delivery, ultimately enhancing efficiency and reducing cost within the LNG supply chain.Improving the distribution network offers several financial benefits, including cost reduction, faster delivery times, more affordable distribution, and enhanced efficiency in the utilization of tanker trucks for LNG transportation. By optimizing the distribution network, transit costs associated with LNG transportation can be significantly lowered. This can be achieved through intelligent route planning, taking into account factors such as distance, traffic conditions, and fuel consumption. Minimizing transit costs contributes to overall savings for businesses operating in the LNG market. Faster delivery times are another advantage of an enhanced distribution network. By designing efficient routes and eliminating unnecessary detours or delays, the time taken for LNG to reach its intended destinations can be reduced. This not only improves customer satisfaction but also allows for more frequent deliveries and better coordination of supply and demand. Cheaper distribution is a direct outcome of an optimized distribution network. By strategically planning pickup locations, destinations, and intermediate stops, the costs associated with transferring LNG between terminals and consumption centres can be minimized. This leads to savings in transportation expenses, ultimately benefiting both businesses and end-users. Efficient utilization of tanker trucks is crucial for maximizing profitability in the LNG industry. An improved distribution network enables better allocation of resources, ensuring that tanker trucks are utilized optimally. This includes reducing empty or underutilized trips, maximizing load capacities, and minimizing idle time. Such efficiency improvements translate to cost savings and increased revenue for businesses involved in LNG transportation. Overall, the financial gains from improving the distribution network are substantial. Lower transit costs, faster delivery times, cheaper distribution, and more efficient use of tanker trucks contribute to increased profitability, competitiveness, and sustainability in the LNG market.

Water supply is a mandatory service for Tanzanians from respective legal public water utilities, and their sustainability reflects implementations of best management strategies at a local level. The objective of this study was to assess current approaches used in water quality and quantity management in Tanzania. This was achieved through secondary water data tends, on-site water quality assessments, visits of respective water supply and sanitation authorities, and assessment of their performances. It was observed that water supplied in rural-based authorities was quite different from that supplied in an urban setting as far as quality and quantity is concerned, urban-based supplies being of assistance to users over rural ones. A new strategy on water management is presented for sustainable water supply in Tanzania; it is based on controlling groundwater abstractions and preference of surface water in public water supplies. Rural water supply management must learn several practices realized at urban supplies for the betterment of respective majority water users.

Today’s purchasing companies demand an advanced buyer equal of enactment from their supplier while the two parties maintain a respectful connection. Although the supplier selection (SC) product life cycle cost (SCPLCC) is an important consideration among corporations, SCPLCC problem has become associated with deciding how one supplier should be selected from possible alternatives. In this study, we applied two types of goal programming, multiobjective linear programming and revised multichoice goal programming to develop a PLCC-based concept to solve the SCPLCC problem and construct a decision-making tool for application to a case of supply chain management in a Taiwanese light-emitting diode company in the high-tech industry. Our study main contribution Company managers can easily use the two approaches of the SCPLCC model with different parameters to solve SCPLCC model problems. Finally, we comparing five models found RMCGP with weighted linear goal programming had an adequate effect for application to the PLCC concept for high-technology comapny; this cloud make company decision–makers focus on low PLCC and select better supplier.

Previous research has proven that one of the fundamental requirements for ensuring increased profitability and economic competitiveness of offshore-based projects is co-locating different technologies within the same marine space. This paper presents a number of techno-feasibility analyses for floating offshore technologies for the Maltese Islands, located in the Central Mediterranean Sea. The first part compares the feasibility of offshore-based solar photovoltaic prices with those onshore, taking into consideration Malta’s land prices. The second part considers the use of a novel floating breakwater design that integrates energy storage. The breakwater is used to create a sheltered water area in deep waters for a multi-use marine park. Different revenue streams for the floating break water are considered, including renting the sheltered marine space out to operators of floating solar farms, aquaculture cages and vessel berthing facilities, and the provision of energy storage services. It is found that the combined income from the multiple revenue streams is still insufficient to justify the investment and that financially support from Government is essential to render the floating breakwaters viable.

Hybrid power plants have recently emerged as reliable and flexible electricity generation stations by combining multiple renewable energy sources, energy storage systems (ESS), and fossil-based output. However, the effective operation of the hybrid power plants to ensure continuous energy dispatch under challenging conditions is a complex task. This paper proposes a dispatch engine (DE) based on mixed-integer linear programming (MILP) for the planning and management of hybrid power plants. To maintain the committed electricity output, the dispatch engine will provide schedules for operation over extended time periods as well as monitor and reschedule the operation in real-time. Through precise prediction of the PV and wind power output, the proposed approach guarantees optimum scheduling. The precise prediction of the PV and wind power are achieved by employing a predictor of Feed-Forward Neural Network (FFNN) type. With such a dispatch engine, the operational cost of the hybrid power plants, and the use of diesel generators (DGs) are both minimized. A case study is carried out to assess the proposed dispatch engine feasibility. A real-time measurement data pertaining to load, wind, and PV power outputs is obtained from different locations in the Sultanate of Oman. The real-time data is utilized to predict the future output power from PV and the Wind farm over 24 hours. The predicted powers are then used in combination with a PV-Wind-DG-ESS-Grid hybrid plant to evaluate the performance of the proposed dispatch engine. The proposed approach is implemented and simulated using MATLAB. The results of the simulation reveal the proposed Feed-Forward Neural Network’s (FFNN) powerful forecasting abilities. In addition, the results demonstrate that adopting the proposed DE can minimize the use of DG units and reduce plant running expenses.

This bibliographic study addresses key aspects related to fishing, product safety, and climate change in the Adriatic Sea region. The examination of product safety focuses on the assessment of contaminants originating from human activities such as industry, mining, agriculture, and household waste disposal. The contamination of the aquatic environment has emerged as a pressing global concern, extending to the Adriatic subbasin. Aquatic organisms, including fish, are prone to accumulating pollutants directly from polluted water sources and indirectly through the food web. The bio-accumulation of potentially hazardous substances, particularly heavy metals, pesticides, PCBs, PAHs, and antibiotic resistance in aquatic organisms, poses a significant threat to human health. Climate change effects will deplete our seafood supply in terms of quantity and safety owing to negative consequences such as higher levels of pollution, parasites, viruses, infections, acidification, and toxicities such as shellfish poisoning. Global food safety strategies should be developed to reduce greenhouse gas emissions and promote environmentally friendly technology, which indirectly affects seafood quality and microbiological safety, especially for Adriatic Sea, which is part of the Mediterranean Sea, characterized by the most polluted waters in the world.

This qualitative research explores the intricate relationship between cultural influences on supply chain practices and their implications for marketing strategies. Cultural dimensions such as individualism versus collectivism, uncertainty avoidance, and contextuality significantly shape decision-making processes, risk management strategies, and relationship dynamics within global supply chains. Through semi-structured interviews with supply chain managers, marketing executives, and cultural experts across diverse industries and regions, this study investigates how cultural values impact supply chain operations and consumer engagement strategies. Key findings highlight that collectivist cultures prioritize consensus-building and long-term relationships, fostering trust and collaboration among supply chain partners. In contrast, individualist cultures emphasize efficiency and accountability but may face challenges in relationship building. Risk management practices vary with cultural orientations towards uncertainty, influencing the adoption of structured versus flexible approaches to mitigate disruptions. In terms of marketing implications, the study underscores the importance of cultural sensitivity in crafting effective strategies. High-context cultures require marketing messages that resonate emotionally through implicit communication and cultural symbolism, while low-context cultures prefer clear, direct messaging focusing on product benefits. The study concludes by advocating for cultural competence as a strategic imperative for global businesses, enabling them to leverage cultural diversity for innovation and competitive advantage. It emphasizes the need for continuous adaptation to cultural nuances and market dynamics to foster inclusive collaboration and achieve sustainable growth in a globalized economy.

Sustainable supply chains have become increasingly crucial to address environmental and social challenges faced by societies worldwide. Last-mile delivery, which involves delivering products from a distribution center or warehouse to the final destination, typically a consumer's doorstep, is an essential component of the supply chain. However, it faces numerous challenges such as traffic congestion, air and noise pollution, and carbon emissions. This research paper explores the viability of last-mile delivery solutions for sustainable supply chains. The study reviews the literature on last-mile delivery challenges, sustainable last-mile delivery solutions, and case studies of sustainable last-mile delivery solutions. The results indicate that innovative last-mile delivery solutions, such as electric vehicles, cargo bikes, and drones, have the potential to reduce environmental impact and improve the efficiency of last-mile delivery while enhancing social equity. Additionally, partnerships between different stakeholders, including governments, logistics companies, and consumers, can contribute to the development of sustainable last-mile delivery solutions. The study concludes that sustainable last-mile delivery solutions are essential to achieving sustainable supply chains and recommends further research to explore the economic feasibility and scalability of these solutions.

High-density olive groves, despite their interesting production potential, have several limitations, also due to the high fruit load and the irrigation requirements.The study aimed to evaluate the effects of fruit load and deficit irrigation on oil yield and fruit quality, and on olive chemical composition in a high-density olive grove (cv Sikitita). Our main hypothesis was that the primary metabolism, as influenced by crop load and stress, could modify the accumulation of different phenolic classes.Different fruit loads were generated through flower thinning (66%, 50%, 33%, 0%) and two deficit irrigation treatments (-60%, -75%) were compared to the well-watered control (920 m3/ha).Thinning treatments had a limited effect on oil yield, on the other hand, deficit irrigation caused considerably less oil accumulation in the fruit on all sampling dates.Thinning 66% and deficit irrigation 75% were considered with the control for untargeted metabolomic analysis, considering three sampling dates. 233 different phenolic compounds were annotated. Multivariate HCA results indicated the impact of harvest time on the phenolic profile of olive fruits, yielding two separate clusters grouping t1 and t2 together and apart from t3. Regarding agronomic techniques, they played a differential role in the phenolic profile (supervised OPLS – DA). Fruit load mostly affected flavonoid glycosides. In contrast, the phenolic response to deficit irrigation is more heterogeneous, with phenolic acids (35%), flavonoids (25%), LMW, and other phenols (25%).

At present, sustainability and emerging technology are the most expressed issues in any supply chain management (SCM) sector. At the same time, pandemic makes consumers more concerned regarding health, and safe food with a sustainable way to access the current market. Thus, supervision and monitoring of product quality with symmetric traceability information in fresh food and fisheries SCM is significant. Research on food safety and traceability systems based on blockchain, internet of service (IoT), wireless sensor networks (WSN), and radio frequency identification (RFID) provides the solution of constancy from production to consumption. This review focused on the RFID-based traceability systems in fisheries SCM, which have been employed globally in the last fifteen years to ensure fish quality and security. Additionally, a summarized comparison study has presented different sectors’ traceability systems using RFID and their advantages over real-time applications. The outcome of this study will help future researchers to solve the crisis in terms of trust between consumers and the fisheries SCM. Thus, this review would be a guideline and solution for enhancing the reliability of RFID-based traceability in food SCM systems to ensure the integrity and reducing the opacity and asymmetry in the product information.

Aluminum is a strategic mineral resource, and China’s aluminum production and consumption is fairly large. However, its supply guarantee is uncertain because of a high dependency on external raw materials. This uncertainty may expand, so finding a way to reduce the uncertainty of aluminum resource supply is especially important. This paper applies the SFA method to analyze the aluminum flows in mainland China from 1996 to 2014, and establishes a supply structure model to measure its supply guarantee degree. The results claim that: (1) China’s aluminum production can satisfy demand and even create a surplus; (2) Domestic self-productive primary and secondary aluminum increased at an annual rate of 12% and 24%; (3) The proportion of self-productive secondary aluminum in the supply structure increased from 7.7% in 1996 to 12.8% in 2014, while that of primary aluminum decreased from 79.6% to 42.8%; (4) The total supply guarantee degree decreased from 87.3% to 55.6% in this period. These results provide a feasible way to solve this plight: the proportion of secondary aluminum in the supply structure should be enhanced, and an efficient aluminum resource recycling system needs to be established as soon as possible to ensure its sustainable supply.

Building a new-type power system is the key core of the green and low-carbon development of energy, the restructuring of the power system will inevitably have a linked impact on the coordinated development of the economy-energy-environment (3E) system. This paper constructs a "Dual-Triangle" theoretical framework consisting of the “Energy Trilemma” and the "Sustainable Development Triangle", by combining historical statistical analysis with scenario predictive analysis, analyzes the historical characteristics of the "Dual Triangle" and future development trends under different scenarios, and studies the coupled interaction relationship of the "Dual-Triangle" to explore the optimal transformation path of the power system that is most beneficial to the coordinated development of the 3E system. The conclusions are as follows: (1) The energy system gradually inclined towards economy and cleanliness from 2010 to 2022, the level of coordinated development of the 3E system fluctuated upwards, and the operation status of the "Dual Triangle" was stable. (2) Positive coupling relationship between "Dual Triangle" of scenario S1 is close, which can be regarded as the preferred path for the reconstruction of the power system. Due to phased development has clear development priorities, scenario S2 will artificially break the balance of the “Energy Trilemma”, which is a development model that dynamically mitigates the challenges of the “Energy Trilemma”.(3)The contradiction between economy and cleanliness is continuously weakened, and security has become the core contradiction of the "Impossible Triangle". The combination of renewable energy and energy storage is the key to resolving this contradiction. This paper conducts an integrated and innovative application of the "Dual-Triangle" theory, and the results provide a case basis for how to achieve the coupled interaction of the "Dual-Triangle", promote high-quality energy development, and support the sustainable development of the economy and society.

The installation of electric vehicle supply equipment (EVSE) increases demand and peak loads, potentially straining existing energy distribution infrastructure. Dispersed and inadequately planned placement of charging points (CPs) can disrupt the electrical grid, surpass contracted demand thresholds, and require infrastructure upgrades, thereby incurring unfeasible costs for Distribution System Operators (DSOs). In this context, it is necessary to recognize the role of business models in enabling effective electrification of the transportation sector. In response to these challenges, this paper introduces a novel e-mobility hub management strategy, tailored for implementation in the Brazilian context. The proposed strategy revolves around a microgrid configuration encompassing dispatchable and photovoltaic generation, a battery energy storage system (BESS), EVSE infrastructure, and local loads. Moreover, this centralized controller facilitates the implementation of dynamic pricing and demand-response mechanisms, integral to business models seeking to integrate EVSE into the distribution grid. To validate the efficacy of the proposed solution, hardware-in-the-loop (HIL) simulations of the microgrid system are conducted. These simulations, incorporating the centralized controller, serve as a tool for assessing system performance and viability before on-site equipment deployment. Finally, this paper concludes with the insights gleaned from test analysis and its discussion through a selection of the most expressive scenarios, including islanded and connected operation modes.

This research aims to explore the adoption and impact of green supply chain practices (GSCP) on sustainable development in Bangladesh. The study seeks to understand the current state of GSCP adoption across various industries, identify key drivers and barriers, assess the perceived benefits and challenges, and evaluate the overall impact on environmental sustainability, economic performance, and social well-being. The research employs a qualitative approach, utilizing interviews with key stakeholders, document analysis, and literature review to gather data and insights. Interviews were conducted with representatives from government agencies, businesses, civil society organizations, and academia to obtain diverse perspectives on GSCP adoption and its implications for sustainable development in Bangladesh. The findings reveal a mixed scenario of GSCP adoption across different industries in Bangladesh, with sectors such as textiles leading the way. Key drivers of GSCP adoption include regulatory pressures, market forces, corporate social responsibility initiatives, and financial incentives. However, organizations face significant barriers such as high upfront costs, lack of awareness and expertise, regulatory uncertainty, and supply chain complexity. Despite these challenges, GSCP offer various benefits, including environmental sustainability, economic performance, and social well-being. Successful initiatives demonstrate tangible impacts, highlighting the potential of GSCP to contribute to sustainable development. The research is limited by its qualitative nature and focus on selected industries and stakeholders. Future studies could employ quantitative methods and broader sampling to provide a more comprehensive understanding of GSCP adoption and its implications in Bangladesh. The findings provide actionable insights for policymakers, industry leaders, and other stakeholders to promote GSCP adoption and enhance sustainable development in Bangladesh. Strategies for overcoming barriers and maximizing benefits are outlined, emphasizing the importance of collaboration and capacity-building initiatives. GSCP adoption can have positive social implications by promoting ethical labor practices, improving working conditions, and fostering community engagement. By prioritizing sustainability, businesses can contribute to social well-being and inclusive growth. This research contributes to the literature on GSCP adoption and sustainable development in Bangladesh by providing empirical insights and practical recommendations. The study adds to the understanding of the drivers, barriers, benefits, and challenges associated with GSCP adoption, highlighting the importance of integrating environmental, economic, and social considerations in supply chain management.

This research aims to explore the complex interplay between supply chain resilience (SCR), digital supply chain (DSC), and sustainability, focusing on the moderating influence of supply chain dynamism. The goal is to understand how these elements interact within the framework of contemporary supply chain management and how they collectively contribute to enhancing sustainability outcomes. The sample size is 300 CEOs and managers. The study approach integrates quantitative research methods. Structural equation modeling (SEM) is utilized to quantitatively analyze the direct and indirect effects of SCR and DSC on sustainability. The numerous surveys we conduct among supply chain ecosystem stakeholders provide a rich picture of practical implications and contextual nuances. In sum, our early findings generally support a positive relationship between SCR and sustainability in and of itself decrying the need for more resilient supply networks for sustainability. We further find the beneficial impact of digital technologies in promoting sustainability via enhancing environmental control and controlling for efficiency in supply chains. We also offer evidence to show that supply chain dynamism compounds the positive logic between SCR and DSC and sustainability. As a final word, it must be noted that our work speaks to the burgeoning Supply Chain Dynamism as moderator literature by examining the direct and contingent effects of SCR and DSC on not only performance but sustainability. By shedding light on the moderating role of dynamism, the study provides fresh insights into the multifaceted nature of supply chain management and sustainability practices. The study's findings enhance theoretical understanding by elucidating the synergistic effects of SCR, DSC, and sustainability in dynamic supply chain settings. It augments existing theoretical frameworks by integrating concepts of resilience, digitalization, and sustainability into a comprehensive model. Practical and economical, the research offers actionable guidance for organizations aiming to improve sustainability performance through resilient and digitally advanced supply chains. By acknowledging the role of supply chain dynamism, managers can tailor strategies to manage disruptions effectively and leverage digital innovations. Economically, adopting sustainable practices can result in cost savings and competitive advantages. The research emphasizes the importance of aligning supply chain strategies with sustainability goals to drive long-term value and societal impact.

Smart manufacturing encompasses a category of manufacturing that employs computer-integrated capabilities and technologies to enhance supply chain optimization, production efficiency, and recyclability. Yet limited studies have been conducted to optimize these prospects from the perspective of low resource countries where such innovative studies have not been adequately explored. This paper aims to examine the implications of smart manufacturing practices (Smart Procurement, Smart Supply Chain, Smart Production Planning and Control, Automation and Industrial Robot, and Supply Chain Configuration) on pro-environmental behaviour and develop a baseline moderated mediation model to explain the relationship between smart manufacturing and pro-environmental behaviour with a role of green dynamic capability, and environmental orientation. This study is anchored on quantitative research approach, deductive reasoning, and explanatory design. Cross – sectional survey data have been obtained from 382 manufacturing companies in Ghana. Our hypotheses have been tested using Structural Equation Modelling and SMART-PLS version 3.8.9. The study has revealed that smart manufacturing practices significantly and positively relate to pro-environmental behaviour. Moreover, green dynamic capability and environmental orientation moderate the relationship between smart manufacturing and pro-environmental behaviour. The implications of the study include the emergence of a baseline model to guide policymakers, practitioners, and academicians to explain the relationship between smart manufacturing and sustainable manufacturing in the context of developing countries. Again, the social implication of the study includes the realisation of decent job and economic growth, responsible consumption and production as well as actions taken to combat climate change.

‘‘Sustainable Supply Chain Management’’ (SSCM) has become a hot topic on which eminent researchers are working on every day. However, it is clear that we still observe in this field of research, an artistic vagueness on the fundamental differences between Sustainable Supply Chain Management and Green Supply Chain Management (GSCM) Moreover, it is regrettable to note that previous researchers haven't yet thought about having a specific theory which can be applied to SSCM, the use of macro theories still being observed. In addition, we observe a lack of research in the oil and gas industry especially in Developing Countries when we know that this industry is the most lucrative and polluting. Therefore, this paper’s purpose consists to make a Systematic Literature Review (SLR) of 38 papers published from 2005 to 2023 especially in oil and gas industry and in Developing Countries, in order to make a clear distinction between SSCM and GSCM while highlighting the practices related to them and at the same time, generating a united theory which will bring together the triple bottom line of the SSCM. As findings, the authors built a Conceptual Framework that applies the triple bottom line of the SSCM in oil and gas industry by demonstrating that GSCM which is more related to environmental issues and is a part of the SSCM. Therefore, in order to be more efficient and to have a great impact on their performances, Oil and gas companies should apply SSCM practices rather than GSCM practices which are very different from what is applied in Developed Countries because of certain barriers and pressures.

In the last decades, the impacts of urbanization on the hydrological cycle have led to an increase in the frequency and magnitude of urban flooding events, also amplified by the effects of climate change. Sustainable Drainage Systems (SuDS) provide a revolutionary change in this field, improving the sustainability and resilience of cities. This research explores the integration of different SuDS with the aim of significantly reducing both flow volume and celerity of floods in a residual urban catchment area of metropolitan city of Querétaro (Mèxico), where extreme rainfall frequently occurs. This catchment is a representative suburb of urban pressure and environmental degradation problems. Currently, managing storm water under climate uncertainty through a multi-disciplinary approach is a major concern in this urban area. A 1D-2D coupling model of shallow water equations, finite volume method, unstructured meshing method, and hybrid parallel computing application defined the optimal configuration of SuDS at catchment scale to reduce the flood vulnerability in Querétaro. Specifically, in this paper we explore the management issues of the proposed SuDS configuration that acts as a water resource system with multiple purposes. A generic simulation model called MODSIM was applied to simulate the designed urban drainage system under a balanced IPCC future climate scenario in terms of reliability, resilience and vulnerability against water scarcity.

A high step-up DC-to-DC converter that integrates an isolated transformer and a switched-clamp capacitor is presented in this study. The voltage stress of the main power switch should be clamped to 1/4 V by using the turn ratio and switched-clamp capacitor of an isolated transformer to achieve a high voltage gain. In addition, a passive clamp circuit is employed reduce voltage stress on the main power switch. The energy of the leakage inductor can be recycled by the clamp capacitor because of the passive clamp circuit, thereby improving the power converter efficiency. The converter consists of one isolated transformer, one main switch, three capacitors, and four diodes. Operating principle and steady-state analyses are also discussed. Finally, a 24-V-input voltage to 200-V-output voltage and a 150 W output power prototype converter are fabricated in the laboratory. The maximum efficiency of the converter is 95.1 at 60 W.

The mathematical modelling of reverse logistics inventory systems ignores that returned items may arrive out of sequence, i.e. with different number of remanufacturing times. Moreover, such modelling assumes that the retuned items may retain the same quality upon recovery regardless of how many times they have been previously remanufactured. This paper develops a new mathematical expression of the percentage of retuned items that can be remanufactured a finite number of times. The proposed expression is modelled as a function of the expected number of times an item can be remanufactured on its life cycle and the number of times an item can be technologically (or optimally) remanufactured based on its quality upon recovery. The model developed in this paper considers joint production and remanufacturing options. The return rate is a varying demand dependent rate, which is a decision variable with demand, product deterioration, manufacturing and remanufacturing rates being arbitrary functions of time. The model considers the initial inventory of returned items in the mathematical formulation, which enables decision makers to adjust all functions and input parameters for subsequent cycles. Illustrative examples indicate that dependent purchasing price of recovery items and the incorporation of remanufacturing investment cost significantly impact on the optimal remanufacturing policy.

Aquaculture contributes to the sustainable development of food security, marine resource conservation, and economy. Shifting aquaculture feed from fish meal and oil to terrestrial plant-derivatives may result in cost savings. However, many carnivorous fish cannot be sustained on plant-derived materials, necessitating the need for the identification of important factors for farmed fish growth and to investigate whether components derived from terrestrial plants can be used in feed. Herein, we focused on the carnivorous fish leopard coral grouper (P. leopardus) to identify the essential growth factors and clarify their intake timing from feeds. Furthermore, we evaluated the functionality of starch, which are easily produced by terrestrial plants. Results reveal that carbohydrates, which are not considered essential for carnivorous fish, can be introduced as a major part of artificial diet. The development of artificial feed using starch offers the possibility of increasing the growth of carnivorous fish in aquaculture.

Evidence is growing that mankind must learn from nature, a self-sufficient and self-organized system that adopts all the opportunities to develop life and ingeniously makes the most of whatever energy source. Attempting to satisfy the requirements of our energy-consuming world, we cannot afford to disregard any available source of energy, mainly those characterized by zero-CO₂ emissions. In this context an alternative scenario could be opened by the use of the nuclear radiations emitted from naturally occurring or artificially produced radionuclides. Abandoned mines of U, Th and Rare Earths , as well as storage areas of artificially produced isotopes all over the globe are available and affordable sources of radiations that can be converted in electrical power. The transition from laboratory-scale nuclear batteries to large-area converting modules would allow to safely re-use a big amount of already existing radionuclides, converting a trouble into a resource.

Thermal camouflage is a highly sought-after technology to increase the survivability of military equipment against infrared (IR) detectors. Recently, two-dimensional (2D) nanomaterials have shown low IR emissivity, widely tunable opto-electronic properties and compatibility with stealth-applications. Among them, graphene and graphene-like materials are the most attractive 2D materials used for thermal camouflage applications. In particular, in multilayer graphene (MLG) charge density can be effectively tuned through sufficiently intense electric fields or through electrolytic gating. Therefore, MLG optical properties, like infrared emissivity and absorbance, can be controlled in a wide range by voltage bias. The large emissivity modulation achievable with this material makes it suitable in the design of thermal dynamic camouflage devices. Generally, the emissivity modulation in the multilayered graphene medium is governed by an intercalation process of non-volatile ionic liquids under a voltage bias. The electrically-driven reduction of emissivity leads to a decrease in the apparent temperature of the surface, which can match that of the background enabling thermal camouflaging. Since this property is common to other graphene-based materials, here we present a review specifically focused on the recent advances in the field of the thermal camouflage properties of graphene in the form of composite film and aerogel structures. A summary of the current understanding of the working principle of thermal camouflage materials, current limitations, and future opportunities is presented and discussed.

Most of the literature on the optimization problem of transportation in supply chain networks (SCN) considered fixed costs (FC). However, in the practical applications of this problem it is important to study the effect of FC. This paper examines the impact of fixed cost increase as well as the variable cost on the optimization of a Two-Stage SCN. To do so, two mathematical models for mixed-integer nonlinear programming are developed. The first model optimizes fixed and variable costs in addition to the opening cost, whereas the second model only optimizes variable and opening costs. To evaluate the effect of considering FC on the optimization supply chain problem, four groups of instances are randomly generated, and solved using Lingo. The results of the two models are compared utilizing the average percentage deviation. In addition, sensitivity analysis is performed to determine the impact of changes in opening and variable costs on the considered optimization problem. The computational results and the sensitivity analysis show that the first model with minimized FC outperforms the second model, which does not consider the FC in minimization and FC affect the optimization.

Climate change has become the greatest threat to the survival of world and its ecosystem. With the irreversible impact on the ecosystem, problems like rise in sea level, food-insecurity, natural resources scarcity, seasonal disorders have increased over the past few years. Among these problems, the issue of water scarcity due to the lack of water resources and global warming has plagued several nations. Owing to the rising concerns over water scarcity United Nations (UN) has acknowledged water as a primary resource to the development of societies under the ‘Water Goal’ of the sustainable development goals. As the changing climate and intermittent availability of water resources pose major challenges to forecast demand, especially in countries like the United Arab Emirates (UAE) which has one of the highest per capita residential water consumption rates in the world. Therefore, the aim of this study is to propose an accurate water demand forecasting technique that incorporates all significant factors to predict the future water demands of the UAE. The forecasting model used is the Long Short Term Memory (LSTM), with the factors considered are mean temperature, mean rainfall, relative humidity, Gross Domestic Product (GDP), Consumer Price Index (CPI) and population growth. The LSTM model predicts the water demand forecasting in the UAE showing that the future demand will decrease from 1821 million m3 in 2018 to 1809.9 million m3 in 2027.

Technological advances in the last decades have led to the realization of the concept of a smart environment. A significant part of this development is decentralized ledger technology and its variant, a blockchain. The blockchain database is immutable, open to all stakeholders, secure by architecture and robust. Applying a blockchain in water supply sanitary control creates opportunities for optimization, higher quality of service, cost reduction, better sanitary standards and public control. Physical, chemical, and biological water supply contamination is a great source of public health hazards. Implementation of a blockchain for water supply IoT, from the source point to the consumption point, enables effective response to changing environments, possible cross-contamination, stormwater management or disaster and emergency action. The chapter encompasses all fundamental elements and principles of water collection, distribution and consumption, with a focus on the health hazards and sanitary requirements for potable water. The chapter listed the main contaminants, methods of their registration and elimination, and requirements for drinking water in accordance with WHO, EU Drinking Water Directive and EPA standards. Blockchain technology solutions are described for smart water supply, including smart supply management, smart contracts, tokenization, smart compliance systems, and, most importantly, effective utilization of distributed ledger technologies for sanitary monitoring of water sources, water treatment, and water distribution systems.

Keywords: Green human resource management1; Green supply chain management2; Regulation and legislation3; Sustainable development goals4.

The concept of supply chain leadership strategy has garnered increasing interest from policymakers and experts, because it is among the most dependable practices to sustainable innovation and competitiveness for large firms across developing economies. Effective implementation of supply chain leadership strategic actions at each level in the company can create sustainable innovative and competitiveness. The study collected statistical data using an online Survey- Monkey questionnaire from 46 of top 100 JSE-listed companies with the intention to discover supply chain leadership strategic actions that drive sustainable innovation and competitiveness in the company. The findings expose a significant empirical insight for companies to understand and leverage supply chain leadership strategic actions to influence sustainable innovative position in a developing economy. These results suggest that firms operating within emerging markets should embrace and acknowledge the importance of sustainable innovation in business practices in the provision of goods and services. This study therefore delivers major contributions to the literature to assist in planning sustainable innovation and supply chain practices in a developing economy to survive in a competitive global environment. The paper also offers a vigorous awareness and knowledge of the common characteristics and strategies for supply chain management that needs to be prioritized by the JSE-listed companies.

Phosphorus (P) is the most important substance in inorganic fertilizers used in agriculture industry. In this study, a multi-product and multi-objective model is presented considering economic and environmental concerns to design a renewable and sustainable P-fertilizer supply chain management (PFSCM). To handle complexities of the proposed model, an ensemble knowledge-based three-stage heuristic-metaheuristic algorithm utilizing heuristic information available in the model, whale optimization algorithm, and variable neighborhood search (named H-WOA-VNS) is proposed. At first, a problem-dependent heuristic is designed to generate a set of near-optimal feasible solutions. These solutions are fed into a population-based whale optimization algorithm which benefits from both exploration and exploitation strategies. Finally, a single-solution metaheuristic based on variable neighborhood search is applied to further improve the quality of the solution using local search operators. The objective function of the algorithm is formulated as a weighted average function to minimize total economic cost, while increasing crop yield and P use efficiency. Experimental results over five synthetic datasets and a real case study of the P-fertilizer supply chain confirm the superiority of the proposed method against the state-of-the-art techniques. The results demonstrate that the proposed method performs well in optimizing both the economic cost and environmental issues.

The modern supply chain (SC) is growing in terms of data, devices, users, and stakeholders, which introduced new security challenges and threats, especially with the reliance on centralized servers or cloud platforms. In addition, increased trust among system participants exposes the SC to a higher risk of vulnerabilities which require strong security measures. This article proposes a hybrid security framework for SC systems, BC-DRLzSC, that integrates Blockchain (BC) and Deep Reinforcement Learning (DRL) designed to operate in a zero trust (ZT) environment. In particular, we propose a decentralized BC-based approach integrated with smart contracts to manage system participant registration and authentication and to control access to system resources. BC-DRLzSC adopts a ZT architecture to reinforce SC security, which can be achieved with an advocate to verify each entity’s trustworthiness before granting or retaining access to system resources. Incorporating the ZT architecture, with BC and DRL, can potentially and significantly bolster SC system security. DRL is employed to develop a proactive attack detection model that continuously monitors the incoming traffic from authenticated nodes within the network and predicts any malicious actions. Finally, we evaluate the performance of our proposed DRL solution using the NSL-KDD dataset.

The seed habit is the most complex and successful method of sexual reproduction in vascular plants. It represents a remarkable moment in the evolution of plants that afterwards spread on land. In particular, seed size had a pivotal role as for evolutionary success and agronomic trait, especially in the field of crop domestication. Given that crop seeds constitute one of the primary products for consumption, it follows that seed size represents a fundamental determinant of crop yield. This adaptative feature is strictly controlled by genetic traits from both maternal and zygotic tissues, although seed development and growth are also affected by environmental cues. Despite being a highly exploited topic for both basic and applied research, there are still many issues to be elucidated as for developmental biology as well as for agronomic science. This review addresses a number of open questions related to cues that influence seed growth and size, and how developmental processes are influenced by them. Besides, new insights on the genetic-molecular control of this adaptive trait are presented.

For the purpose of improve the sustainability of products sold in the EU, Digital Product Passports is a mandatory solution. These passports would systematically gather information about products, such as detailing the materials involved to aid recycling and remanufacturing efforts, or recording the emissions produced throughout the manufacturing process. The overall goal is the establishment of a circular economy in the EU. Current research on Digital Product Passports is focused on collating content for sector-specific applications. However, achieving sustainability goals through Digital Product Passports will require new methods and technical solutions for digital collaboration between supply chain participants, especially in the manufacturing sector. Collaborative work on Digital Product Passports requires trust and traceability in data and access management to ensure privacy over the data contained. One way to enable this securely and confidentially is through the use of blockchain technology, in which stored data cannot be concealed, which is key to the traceability of digital product data documentation. This paper therefore presents a concept for the implementation of generically applicable cross-industry blockchain-based digital product passports. To this end, generic supply chain processes have been abstracted and condensed into the architecture of smart contracts. Great attention is paid to the establishment of traceability as well as privacy through the selection of the blockchain technology Secret Network in combination with Gaia-X functionalities. An illustrative use case for digital product passports in manufacturing is used to demonstrate the applicability of the presented concept. In this use case information about the digital nameplate and carbon footprint is exchanged securely and confidentially in a multi-tenant supply chain network based on the Industry 4.0 infomation model of the Asset Administration Shell.

Latin America and the Caribbean offer the most favorable natural and social conditions for the emergence of cattle ranching that regenerate and maintains the ecosystem services on which life on Earth depends, that is energy efficient and that contributes to meeting fundamental human food needs. Unlike other major global producers, cattle farming in Latin America and the Caribbean is fundamentally based on pasture. Therein lies both its strength (due to the regenerative potential of well-managed pastures) and its vulnerability (due to the pervasive link between deforestation and pasture formation, especially in the Amazon, where 40% of the Brazilian herd is concentrated). The diversification of pastures (today marked by impressive monotony, with brachiaria accounting for 85% of the species in Brazil), the introduction of legumes and tree plantations within them, and the proper management of herds, open the way to the possibility of drastically reducing the area currently occupied by the activity (especially in the Amazon) while maintaining the supply of its products. Agricultural research has disseminated forms of moderate intensification of cattle ranching, which represent a low opportunity cost of animal feed and, at the same time, regeneration of ecosystem services that have so far been destroyed by the prevailing methods of farming.

The West Pomeranian Anti-Crisis Package was an effective tool of the Voivodeship Executive Board of West Pomeranian self-government, which was used to combat and counteract and counteract the social and economic effects of the COVID-19 pandemic. The Anti-Crisis Package was prepared with a view to undertaking systemic, but also point-based measures in order to save and protect regional health care, entrepreneurs, the labour market, but also to use the existing social capital of non-governmental organizations involved in measures reducing the effects of the COVID-19 pandemic. The West Pomeranian Anti-Crisis Package, as evidenced not only by the financial outlays incurred, but also by the outcome of implementing measures achieved in 2020 and their continuation in 2021.

Our work is regarding the analysis of land use changes, in the light of “saving soil” against the expansion due to unearned plus value of land: The loss of natural and agricultural surface in front of the expanding urban environment is a critical aspect of unsustainability of urban development, especially in the way it was carried out in the past decades. The measure of the physical transition of land use and characters from a more natural condition of land surface to a new artificial one, joint with a parallel analysis of the increase of land value due to such change is nowadays a major land-policy tool. The interplay of urban economics regulation with planning, reveals new key issues in urban governance and environmental preservation. In this paper it will be shown some experiment about the impact assessment of soil take, related with the seek of valorization of property inside the planning process. Our paper reports as well about the experimental activity carried out inside the MITO Lab of the Polytechnic of Bari, where reports about property values and environmental values have been produced, specially looking at the reality of the Apulia, a southern Italian Region, that is rich of farmlands and coastlines, often invaded by constructions with a severe loss of nature, landscape and ecosystems services.

Climate change is a major development challenge to Ethiopia. Unless adaptation measures are widely implemented, climate change can set back development efforts and achievements by years. Recognizing this, the Government of Ethiopia (GoE) and civil society organizations have since recently been making considerable efforts to tackle the climate change problem. This paper documents the experience of CARE International in Ethiopia in facilitating bottom-up approaches to promote community-led disaster risk management and climate change adaptation planning through a participator scenario planning (PSP) methodology. PSP is a coordinated approach which leverages a variety of stakeholders' skills and mandates to explore potential climate change risks and their impacts, and then develop locally relevant and shared adaptation action plans that support livelihoods, social capital and ecosystem resilience. The approach has facilitated timely access to and communication of seasonal climate advisories which in turn is empowering communities to take advantage of opportunities that climate presents, which is a key part of adapting to climate change. The institutionalization of the approach by district and regional disaster prevention and food security coordination offices in the southern pastoral regions of Ethiopia encouraged integration of PSP into community livelihood adaptation and local government development planning, hence continuity of the process. Sustainability is expected to be fully achieved when local government planning processes recognize the importance of and provides resources for the participation of meteorological services and community forecasting experts to help refine plans on a seasonal basis, and for systems for dissemination of advisories. Key words: Climate Change, Disaster Risk Reduction, Adaptation, Pastoralism, Ethiopia,

(1) Background: As part of the Scottish Governments five-year recovery plan to address the backlog in NHS care following the COVID-19 pandemic, community pharmacies in Scotland are planned to provide a Hospital Discharge Medicines Supply and Medicines Reconciliation Service. We aimed to qualitatively explore patients’ experience of this new service; (2) Method: Adult patients (≥18yrs age) who consented to participate in the Community Pharmacy Hospital Dis-charge and Medicines Reconciliation Service were invited for interview within 21 days of dis-charge from hospital. Qualitative, one-to-one, semi-structured, patient interviews were conducted by telephone and audio-recorded using Microsoft Teams®. The interview audio recordings were transcribed verbatim and underwent thematic analysis; (3) Results: 12 patients were inter-viewed, evenly split by sex and with a median age of 62 years (range; 36 to 88 years). Analysis generated main five themes; Patient Engagement, Stakeholder Communication, Practical Factors, Human Factors, and Comparative Experiences. Many of these were interdependent; (4) Con-clusions: Patients appreciated that the service ensured a quicker discharge from hospital. Good stakeholder communication, practical factors (including choice, location, and the realities of ob-taining their medication from the community pharmacy), and a pre-existing and trusted rela-tionship in their usual community pharmacy were the key factors that regulated the patient ex-perience. In the main, patients were positive about the introduction of this new service. However, a lack of previous relationship or trust with a community pharmacy, and previous experiences with medication supply problems were factors which had the potential to negatively impact on patient experiences.

Energy poverty, defined as a lack of access to reliable electricity and reliance on traditional biomass resources for cooking, affects over a billion people daily. The World Health Organization estimates that household air pollution from inefficient stoves causes more premature deaths than malaria, tuberculosis, and HIV/AIDS). Increasing demand for energy has led to dramatic increases in carbon emissions. The need for reliable electricity and limiting carbon emissions drives research on Resil-ient Hybrid Energy Systems (RHES) that provide low-carbon energy through combined wind, so-lar, and biomass energy with traditional fossil energy, increasing production efficiency and relia-bility, and reducing generating costs and carbon emissions. Microgrids have been shown as an ef-ficient means of implementing RHES, with some focused mainly on reducing the environmental impact of electric power generation. The technical challenges of designing, implementing and ap-plying microgrids involve conducting a cradle-to-grave life cycle assessment (LCA) to evaluate these systems' environmental and economic performance under diverse operating conditions to evaluate resiliency. A sample RHES has been developed and used to demonstrate implementation in rural applications. This system can provide reliable electricity for heating, cooling, lighting, and pumping clean water. This paper's primary focus is the challenges of using resilient energy sys-tems in the Middle East.

Supplier selection (SC) continues to be a crucial component in manufacturing procurement. Using the PLCC advantages generates revenue and lowers costs more than might be anticipated. Supplier selection (SC) product life cycle cost (SCPLCC) is an important consideration among corporations, SCPLCC problem has become associated with deciding how one supplier should be selected from possible alternatives. Past literature on this topic is limited. We try to close this gap in knowledge. In this study, we attempt to apply two types of goal programming, multiobjective linear programming and revised multichoice goal programming to develop a PLCC-based concept to solve the SCPLCC problem and construct a decision-making tool for application to a case of supply chain management in a Taiwanese light-emitting diode company in the high-tech industry. Our study main contribution Company managers can easily use the two approaches of the SCPLCC model with different parameters to solve SCPLCC model problems. Finally, we are comparing five models found RMCGP with weighted linear goal programming had an adequate effect for application to the PLCC concept for high-technology Company; this cloud makes company decision–makers focus on low PLCC and select a better supplier in sustainable supply chains development.

UN 2030 Sustainable Development Goal 6 presents difficulties for small island developing states such as the Kingdom of Tonga, which relies on rainwater and groundwater lenses for freshwater supply. Planning and managing water resources to supply demands in dispersed small islands under variable climate and frequent extreme events is challenging. Tensions between water planning using top-down versus bottom-up processes have long been recognized. Tonga’s overarching national planning instrument is the Tonga Strategic Development Framework, 2015-2025 (TSDFII). This identifies desired national outcomes and is used to direct and resource Ministries and address international and regional commitments. Water supply was a low priority in the three-month consultations that led to TSDFII. Community Development Plans (CDPs), developed by rural villages throughout Tonga’s five Island Groups over nine years, involved participation from 80% of each village population who ranked local priorities. Analysis of priorities in 117 available village CDPs reveals improvements to village water supply was the highest overall priority in all five Island Groups and ranked within the top three priorities by 76% of all villages, with women, youth and men returning figures of 83%, 66% and 80% respectively. The mismatch between top-down and bottom-up priorities appears to result from an urban/rural divide.

In the quest for more sustainable urban landscape development, the concept of ‘green infrastructure’ (GI) has become central in policy documents and as a multifunctional general planning tool. GI is not however a simple and unambiguous solution. While there in policy documents are claims for more and connected GI, actual urban development takes another direction. The densifying imperative is hard to combine with an increased and more connected GI. This paper argues for a critical and diversified approach to the concept of GI, to facilitate its implementation in urban planning and management. While GI most often is seen as a common asset and a public good, the actual land use negotiations and management responsibilities cannot be limited to a public service discourse, but should address more clearly a variety of actors. Linguistic as well as spatial definitions of the two relevant dichotomies of ‘green-grey’ and ‘public-private’ are crucial in GI location, design, construction and management, it is argued. Overarching representations of GI will be needed, but also – and linked to it – a spatial storm water plan and an overall plan for public space. The development over time will need an intersectorial implementation and management program. Thus some of the GI intentions may be implemented in planning processes, some through reorganisation and redesign of public space, and some by agreements with landowners.

Studies have demonstrated the critical role that safety plays in preserving favourable working conditions in the construction industry, which is necessary to accomplish goals. The aim of this research was to inform stakeholders in the construction industry in developing nations about the value of safety and possible strategies for influencing their opinions regarding safety protocols. The importance of safety to the construction sector, which is crucial to the advancement of the country, has also been emphasized. However, due to a lack of adequate safety understanding among stakeholders in the construction sector, the construction industry is characterized by a great deal of instability and hazard. To determine what factors, affect productive working conditions in the construction production, this study examined safety. A conceptual framework for safe working conditions in the construction sector was developed by considering several aspects, including the person dimension, environment factor, safety behaviour, organization features, technology, and incentives. It is now imperative to bring in these dimensions to improve the safe working conditions in the construction industry, particularly in the developing countries. By putting these safety factors into practice, the construction industry can reduce safety risks, lower the number of accidents and fatalities, cut expenses related to subpar safety performance, safeguard the reputation of construction companies, boost employee morale and satisfaction with their work, enhanced employee retention, reduced absenteeism, and enhanced sustainability goals. Additionally, the proposed conceptual framework is assured to be new and to be widely accepted in the developing nations. Based on this assumption the conceptual framework is designed.

With the burgeoning growth of online retail, the issue of counterfeit products has become a significant threat to both consumer trust and brand integrity, posing challenges to sustainable market practices. Online retail platforms are promoted to redesign their channel structures and enhance brand traceability to tackle counterfeits using blockchain technology. To investigate the interactions between blockchain technology and the channel structures of online retail platforms, we design a game theory model incorporating a manufacturer with(out) blockchain participation selling products via an online retail platform that operates an agency channel and/or a reselling channel. We show that the critical trade-off of blockchain participation comprises the brand assurance effect of the blockchain, the channel competition intensification effect, and the blockchain adoption cost. The platform is capable of strategically designing the channel structure to encourage (while discouraging) blockchain participation by the manufacturer. Our analysis highlights the complementarity between blockchain participation and the channel structure. Furthermore, the effect of the consumer’s belief in the reselling channel, the commission fee in the agency channel, and the substitutability between channels are investigated in depth. The research provides valuable insights for online retail platforms and policymakers seeking to foster a sustainable and trustworthy e-commerce ecosystem.

UN Convention on Climate Change 2015 mandates reducing carbon footprint to reduce global warming. Considering environmental concerns, Electric Vehicles (EVs) spearhead the move towards green mobility. Niti Aayog (Indian Government) has envisaged an “EV only” scenario by 2030. Two wheelers dominate the Indian automobile industry with almost 80% market share. With the transportation sector accounting for 70% of world’s fossil fuels use, the need for a sustainable supply chain which addresses environment, economy and societal issues, has, of late, aroused interest in the business academic community and industries. Sustainability in business decision-making promotes efficiency, controls expenditure, enhances customer delight, increases sales and market share, optimises risk management strategy, and promotes profitability. This study intends to develop a conceptual framework after examining research gaps in sustainable supply chain management (SSCM) and allied topics like sustainability, green supply chain management, and vendor partnerships through collaborative efforts. Even the UN vide Goal 9 of sustainable goals pertaining to industry, highlights the importance of this framework.

In modern times, sustainability in supply chain management is one of the keys to boosting the performance of the supply chain, and it enables the accomplishment of SSCM. It has been found in recent years that SSCM with assist of industry 4.0 applications, can benefit splendid productivity and efficiency in the supply chain. The numerous industry 4.0 applications that are involved are Artificial intelligence (AI), Machine Learning (ML), Internet of Things (IoT) Big Data Analytics (BDA), etc. Industry 4.0 with SSCM has gained a lot of interest from various authors and scholars across the world. Healthcare is one of the most critical sectors due to its importance in handling public health. More recently, the COVID-19 pandemic and other viruses (SARS and Ebola) have highlighted supply chain vulnerabilities that are further mitigated by their lean and globalized structures. Covid-19 underlined the need for supply chain visibility problems within the healthcare sector. When the need for medical supplies became urgent and global distribution was disrupted, companies faced the consequences of needing the technology, systems, and plans in place to correctly predict the onslaught. One report shows that about 94 percent of Fortune 1000 companies reported supply chain disruptions due to the COVID-19 global outbreak. Existing studies have discussed supply chain issues and the importance of AI in addressing these challenges. AI, like Industry 4.0 in the healthcare supply chain, is proving to be a game-changer. This paper aims to review and present the various aspects of SSCM and industry 4.0 applications to get a comprehensive literature review, which contains the analysis of multiple articles published from 2010-2020. In addition, the various challenges SSCM and industry 4.0 applications face are identified and discussed. Also, the impact of Industry 4.0 and sustainable practices brings together the healthcare supply chain. This study will help in getting a good understanding of the different industry 4.0 technologies that are important for setting up SSCM.

The importance of the national security of supply has been emphasized in recent years due to the COVID-19 pandemic and changes in operating environments. Thanks to autonomy and resiliency in fuel procurement, organizations with decentralized energy plants may be able to quickly adapt to the changing needs of society. The main aim of this study was to increase the sustainability of a Finnish CHP plant's wood procurement by determining the company's profitable wood procurement region while keeping the forests renewable. The income received from the sale of energy and the costs incurred from the procurement of wood were collected from the ERP system as input data for the developed DSS. The environmental sustainability of wood procurement was assessed by considering the additional costs caused through the EEAP mechanism if the carbon sink of the forest worsened due to wood procurement in the area. The supply chains were compared so that the CHP plant managers could adopt the best energy wood value chains. The results showed that updating the procurement strategy would be necessary. The CHP plant managers should purchase energy wood from a larger procurement area than the current one and focus on roadside purchases of wood. The Techno-Economic Wood Payment Ability Model was a useful part of the DSS to guide wood buyers toward sustainable wood procurement by increasing the share of renewable forests.

Banks have enormous potential in supporting the achievement of sustainable development goals (SDGs) in accordance with their function as financial intermediaries through sustainable lending. However, the average national financing growth for the sustainable business activity category over the past four years is still 12%. The aim of this research is to identify the conditions of sustainable lending at state-owned conventional banks and analyze the influence of the value chain, economic performance and ESG performance on sustainable lending. The research was conducted at state-owned commercial banks in Indonesia. The research utilized a Structural Equation Modeling (SEM). The SEM results of this study describe value chain, ESG performance (environmental, social and governance) and economic performance have direct and positive influences on sustainable lending, of which ESG performance has the biggest influence. As per individual aspect, social orientation gives the biggest contribution toward sustainable lending.

The open data market is growing, driven by laws requiring governments to make data publicly available. However, the true value of this market lies in the products and services derived from open data. In Slovenia, the open data market has been growing since 2015, especially in the field of mobility. Platforms such as Avtolog.si facilitate the retrieval of vehicle data via vehicle identification numbers, while tocen.si, ojpp.si, and brezavta.si aggregate mobility data, focusing on sustainable and micromobile public transportation services. These platforms use open government data and private sector open data, and are freely accessible. This study examines the use of open data in the Slovenian mobility applications and similar solutions developed in other countries. By mapping these applications, we gain valuable insights into potential advances in the field, and provide a useful resource for future developers worldwide. By focusing on the socio-economic impact of these innovations, the study identifies methods for evaluating such applications. This approach highlights how transforming open data into user-friendly products and services can deepen our understanding of their broader societal and economic benefits. While open data is valuable in its own right, its full transformative potential is realized through innovative products that support sustainable lifestyles and promote environmentally conscious behavior.

To investigate the effects of organic fertilizer combined with reduced chemical fertilizer on radish yield, quality, and soil environment in high mountainous areas (elevation: 1800 m), and to mitigate the environmental pollution caused by excessive use of chemical fertilizers. The field trial was conducted to study the effects of different fertilizer treatments. (Control:local fertilizer application rate: 375 kg·hm² reduction in chemical fertilizer + 4500 kg·hm² organic fertilizer; T1:12% reduction in chemical fertilizer + 4500 kg·hm² organic fertilizer; T2:20% reduction in chemical fertilizer + 4500 kg·hm² of organic fertilizer; T3:28% reduction in chemical fertilizer + 4500 kg·hm² organic fertilizer). Four different fertilizer ratios were studied to assess their impacts on radish quality, yield, and soil environment. The findings showed that T2 significantly increased radish yield by 12.92%. Moreover, it led to significant improvements in the content of vitamin C, soluble sugars, soluble solids, soluble proteins, titratable acidity, and glucosinolates, which increased by 10.62%, 2.15%, 50.00%, 26.90%, 43.90%, and 44.57%, respectively. Treatment T2 also significantly increased soil nutrient content, with a 7.69% and 14.29% increase in total nitrogen and total phosphorus content compared to the control (Control) treatment, and a significant reduction of 21.64% in soil bulk density . T2 treatment significantly enhanced soil urease activity, sucrase activity, alkaline phosphatase activity, and catalase activity, showing an improvement of 28.97%, 55.92%, 52.08%, and 17.47% compared to the control, respectively (p<0.05). Moreover, treatment T2 resulted in a relative abundance increase of 12.25% and 10.43% in Proteobacteria and Actinobacteria respectively. Thus, the combined application of T2:20% reduction in chemical fertilizer + 4500 kg·hm² of organic fertilizer improved the quality and yield of radish while optimizing the soil environment. T2 effectively promoted radish growth, enhanced radish yield and quality, and improved the soil environment.

Water networks are critical infrastructure components, ensuring the continuous supply of high-quality drinking water to consumers. To secure such water supply, regular maintenance, including the replacement of deteriorating pipelines, is essential. In this study, a methodology has been developed for determining optimal pipeline replacement solutions in water supply systems at water utilities with limited data availability. Hydraulic analysis has been conducted on the segment of 25 km of the water supply network using the free software EPANET. Applying water network optimization, eight pipeline replacement projects according to 13 pre-defined criteria have been identified and evaluated. The paper outlines the methods for evaluating the criteria, including defining specific quantitative limits. The Analytical Hierarchical Process (AHP) method was used in the paper to determine the weights of the criteria. The reason for applying this method refers to problems that involve a set of criteria with a mixed structure, including both quantitative and qualitative aspects. Also, the paper describes the steps of the multi-criteria optimization method VIKOR, used to select the optimal project. This paper, considered as case studie, describes a method, i.e. application of a new principles and an innovative way to solve a problem for developing countries.

This study presents a critical literature review on the models of users' adoption of blockchain applications in supply chains. This review pertaining to blockchain technology adoption by supply chain stakeholders is significant as it is a pre-requisite for the technical sustainability of blockchain technology in supply chains. Through a critical literature review, the previous studies related to technology adoption models were analyzed to explore practices brought about by blockchain applications for supply chain management. This study examined the suitability of the existing models (e.g., the technology-organization-environment (TOE) framework, task technology fit (TTF), unified theory of acceptance and use of technology (UTAUT)) of technology adoption for blockchain applications in supply chains and came up with a new unified model, namely, TOE-TTF-UTAUT. This review provides implications for a more appropriate research design using mixed methods. When adopting the TOE-TTF-UTAUT model in a study, two phases of research using mixed methods can be performed. The first phase is an exploratory sequential design in which a qualitative approach to explore the TOE and supply chain task constructs is followed by a quantitative approach using a survey and quantitative analyses to investigate the factors affecting blockchain adoption in supply chains. The second phase adopts explanatory sequential design in which the quantitative findings from the first phase are reviewed for follow-up by qualitative interviews to obtain explanations.

Blockchain technology (BCT) has the potential for sustainable development, enhancing business efficiency, reducing costs, and strengthening data security. Despite its potential, adoption among small and medium-sized enterprises (SMEs) is low due to the need for significant changes in technology infrastructure and the challenge of interoperability. A cross-sectional survey was done with 226 Hong Kong SMEs. The PLS-SEM results highlighted favorable transformation conditions as the most critical factor for SMEs considering the adoption of BCT. These conditions address both internal and external readiness for adopting the disruptive strategy. Other contributing factors to BCT adoption include trust in BCT developers, perceived usefulness and ease of use, government support, and perceived security. The research results contributed to the literature on disruptive technology acceptance, adoption, transformation conditions, technology readiness, and SMEs’ technology adoption. Government-supported policies and initiatives can promote BCT adoption, including educational programs, case studies, and resources for readiness. Financial support and regulatory frameworks can further encourage adoption. BCT developers can demonstrate the value of their systems, effectively communicate potential ROI and cost savings, and provide user-friendly interfaces to increase SMEs’ intention to adopt BCT.

Children are inherently curious about everything they encounter, making the early years a perfect time for STEAM (science, technology, engineering, arts, and math) investigations. An outdoor learning environment can influence STEAM concept formation of preschoolers with intentional design that offer STEAM learning affordances. Despite the rising interest in early STEAM education, there is still limited literature on how the outdoor environment may influence STEAM learning behaviors of preschoolers (3-5 years old). This scoping review intends to evaluate the existing knowledge regarding the physical factors that contribute to STEAM learning affordances in an outdoor environment for children aged 3 to 5. The review included studies from the last twenty years. This scoping review was conducted in accordance with the criteria outlined in the Preferred Reporting Items for Systematic Reviews and Meta-Analyses Extension for Scoping Reviews (PRISMA-ScR). For this scoping review, 843 citations were discovered across four databases (JSTOR, Scopus, EBSCOhost, and Web of Science), ProQuest, and Google Scholar, and 31 articles were considered eligible for inclusion. Through the synthesis of information from those 31 studies, a list of STEAM learning behaviors of children and STEAM activity-supportive settings were identified that may positively influence preschoolers' STEAM concept development.

This article addresses the question why initiatives in the field of green business and sustainable development often fail. Therefore, it dismantles some typical patterns of failure and shows – as a case study – how these patterns can be challenged through an innovative educational concept: the green business and sustainable development school. The applied methodology is a real-life project that is designed through blended, interdisciplinary elements from business model canvas, Theory U, participation and design thinking. The results of the school initiative are discussed and evaluated by four distinctive stakeholder groups and outline the school’s supporting potential to overcome typical patterns of failure by the younger generation in the future. This article concludes with ideas to enhance the school concept reaching out to even more stakeholder-groups to increase its reliability and viability.

Development of both marketing and culture sector has a multi-directional nature showing relationships with the concept of sustainable development that should be considered on various levels of management of cultural sector, i.e. on the level of cultural policy of the state or region, and on micro-scale – in cultural institutions. This is because not only natural environment, economy and technology, but also society and culture constitute the area of sustainable development. Considering the assumptions of sustainable development by cultural institutions is related to implementing in this sphere the marketing concepts that are the expression of adoption of market orientation (on culture participant). The objective of the paper is to show the role of marketing in cultural institutions in the context of assumptions of sustainable development concept. The paper is based on literature studies and results of empirical research of quantitative character, which was conducted on a sample of 451 people managing cultural institutions in Poland. The research included general managers, managers and artistic directors, managers of marketing, promotion and sales departments, as well as owners of cultural institutions. Analysis of research results shows that culture participant has the highest position among groups of consumers of actions conducted by cultural institutions and development of offer diversity, comprised in the concept of sustainable development, emerges as factor stimulating development of culture market that is closely related to growth of the quality of cultural institution offer.

The olive tree (Olea europaea L.) is an evergreen tree that occupies 19% of the woody crop area and is cultivated in 67 countries on five continents. The largest olive production is concentrated in the Mediterranean basin, where the olive tree has had an enormous economic, cultural and environmental impact since the 7th century BC. In the Mediterranean region, salinity stands out as one of the main abiotic stress factors significantly affecting agricultural production. Moreover, climate change is expected to lead to increased salinisation in this region, threatening olive productivity. Salt stress causes combined damage by osmotic stress and ionic toxicity, restricting olive growth and interfering with multiple metabolic processes. A large variability in salinity tolerance among olive cultivars has been described. This paper aims to synthesize information from the published literature on olive adaptations to salt stress and its importance in salinity tolerance. The morphological, physiological, biochemical, and molecular mechanisms of olive tolerance to salt stress are reviewed.

Nowadays, considering the growing tendency of companies towards e-commerce as well as green production, and dual-channel green supply chain management has become particularly important. This paper investigates pricing decisions within a dual-channel green supply chain framework while considering the capital constraints faced by risk-averse manufacturer. Simultaneously, the impact of the degree of risk aversion, consumer green preferences, and channel preferences on the optimal decision-making process of green supply chain members is analyzed. We address the issue of financial constraints faced by manufacturer through bank loans and trade credit financing and compare the two cases. Our findings illustrate that trade credit financing outperforms bank loan financing in the dual-channel green supply chain. Moreover, pricing decisions under different models are influenced by consumer preferences and risk aversion. Specifically, the greenness of the product, wholesale price, and sale price exhibit negative correlations with manufacturers' risk aversion but positive correlations with consumer preferences.

Gas and power networks are tightly coupled and interact with each other due to physically interconnected facilities. In an integrated gas and power network, a contingency observed in one system may cause iterative cascading failures, resulting in network wide disruptions. Therefore, understanding the impacts of the interactions in both systems is crucial for governments, system operators, regulators and operational planners, particularly, to ensure security of supply for the overall energy system. Although simulation has been widely used in the assessment of gas systems as well as power systems, there is a significant gap in simulation models that are able to address the coupling of both systems. In this paper, a simulation framework that models and simulates the gas and power network in an integrated manner is proposed. The framework consist of a transient model for the gas system and a steady state model for the power system based on AC-Optimal Power Flow. The gas and power system model are coupled through an interface which uses the coupling equations to establish the data exchange and coordination between the individual models. The bidirectional interlink between both systems considered in this studies are the fuel gas offtake of gas fired power plants for power generation and the power supply to LNG terminals and electric drivers installed in gas compressor stations and underground gas storage facilities. The simulation framework is implemented into an innovative simulation tool named SAInt (Scenario Analysis Interface for Energy Systems) and the capabilities of the tool are demonstrated by performing a contingency analysis for a real world example. Results indicate how a disruption triggered in one system propagates to the other system and affects the operation of critical facilities. In addition, the studies show the importance of using transient gas models for security of supply studies instead of successions of steady state models, where the time evolution of the line pack is not captured correctly.

Sorghum (Sorghum bicolor L.) ranks fifth as the most crucial cereal crop globally, yet its seed morphology remains relatively unexplored. This study investigated seed morphology in sorghum based on 115 mini core and 130 Senegalese germplasms. Eight seed morphology traits encompassing size, shape, and color parameters were assessed. Statistical analyses explored potential associations between these traits and resistance to three major sorghum diseases: anthracnose, head smut, and downy mildew. Furthermore, genome-wide association studies (GWAS) were conducted using phenotypic data from over 24,000 seeds and over 290,000 publicly available single nucleotide polymorphisms (SNPs) through the Genome Association and Prediction Integrated Tool (GAPIT) R package. Significant SNPs associated with various seed morphology traits were identified and mapped onto the reference sorghum genome to identify novel candidate defense genes.

In this study, we demonstrate the direct preparation of dihalo-γ-lactams featuring two distinct halogens from dichloroamides using a novel Atom Exchange Radical Cyclization (AERC) procedure. This method integrates the established Atom Transfer Radical Cyclization with halogen exchange in solution. The technique operates under mild conditions and requires little amounts of metallic copper, serving as both a supplemental activator and reducing agent.

Energy poverty in the Global South generally focuses on the lack of basic access to modern fuels and energy carriers. Impoverished people rely primarily on traditional biomass as a source of energy. This situation of basic resource deprivation, in which almost one third of the world's population lives, masks other relevant features of the problem. Current assessments of energy poverty in impoverished areas and the mitigation strategies being implemented derive from the development agenda and, with variations in detail and scope, highlight electricity connections and access to clean cooking fuels as guarantors of progress. However, a comprehensive understanding of energy poverty requires going beyond basic access, building on the interactions between the supply of energy sources and carriers, the provision of energy services and its impact on decent living conditions. Several studies in the last decade have attempted to construct an assessment framework centered on energy services to deal with these interactions. This work discusses the relevant dimensions in the framework (supply, services and impact in wellbeing), reviews the multidisciplinary work available in each aspect, presents a range of proposed taxonomies, and discusses the different issues. A detailed framework is proposed for the integrated assessment of the supply of energy carriers and energy equipment, the provision of relevant energy services, and the improvements obtained in living conditions.

The Imbalance Cost Pass-Through (ICPT) is a flexible component of the Incentive Regulation (IBR) that empowers power producers to adjust tariffs in response to variable fuel prices, thereby enhancing the economic resilience of electricity generation. However, the cost of electricity generation is significantly influenced by the volatility of commodity prices, including coal, gas and LNG. In Malaysia, the Energy Commission has conducted biannual reviews of fuel and other generation costs. Any cost savings or increases identified during these reviews will be passed on to customers in the form of rebates or surcharges. Due to that reason, this study proposes ICPT price forecasting for the electricity market in Peninsular Malaysia. The study aims to construct an ICPT-related baseline model for the peninsular generation data by employing three forecasting methods. The forecasting performance is analysed by a Mean Absolute Percentage Error (MAPE). In findings, the ARIMA method is one of the most accurate forecasting methods for fuel prices compared to the Moving Average (MA) and LSSVM methods. The observed price differences between the ARIMA and LSSVM models for ICPT are minimal. The ICPT price for July-December 2022 and January-June 2023 is MYR 0.21/ kWh for ARIMA and MYR 0.18/kWh for LSSVM, which are close to the actual TNB’s ICPT tariff. As for the forecasting, the ICPT price is expected to drop for the next announcement. The findings of this study may contribute to a positive impact on the sustainability of the energy sector in Malaysia.

Ethiopian Airlines is a leading airline in the world. Its supply chain management is one of the most critical aspects in achieving its sustainability objectives. The present study aims to assess the sustainability practices and strategies of Ethiopian Airways in its supply chain, identifying areas for improvement and recommending strategies for enhancing sustainability. The study concentrates on pertinent sustainability concerns within the aviation sector while examining antecedent research on the sustainability of Ethiopian Airlines’ supply chain management strategies. The findings of the study reveal that there are several areas in need of improvement, including the implementation of waste reduction measures, the establishment of a recycling program, and the reduction of single-use plastic usage. It is suggested that promoting responsible tourism embodying sustainable practices is imperative, particularly within the airline context.