Cloud Computing is a promising and emerging technology that is rapidly being adopted by many IT companies due to a number of benefits that it provides, such as large storage space, low investment cost, virtualization, resource sharing, etc. Users are able to store a vast amount of data and information in the cloud and access it from anywhere, anytime on a pay-per-use basis. Since many users are able to share the data and the resources stored in the cloud, there arises a need to provide access to the data to only those users who are authorized to access it. This can be done through access control schemes which allow the authenticated and authorized users to access the data and deny access to unauthorized users. In this paper, a comprehensive review of all the existing access control schemes has been discussed along with analysis. Keywords: role-based access control, attribute-based access control, attribute-based encryption

The current trend in supply chain development requires the application of new knowledge to meet the challenges posed by new technologies. One such technology is blockchain, which facilitates supply chain solutions through the use of innovative data transfer, storage and verification systems. However, the use of blockchain can be challenging for certain stakeholders, such as small carriers, who may lack the necessary technical expertise or access to the technology. In this paper, we explore the potential for engaging small carriers that provide services within the blockchain supply chain but face technological barriers. We identify the barriers and opportunities for these carriers to participate, focusing on a case study of a small carrier that transports temperature-sensitive cargo. In addition, we introduce in-vehicle temperature measurement for use in cold chains and propose an ecosystem that can benefit different stakeholder groups.

CoCrFeNiMn high-entropy alloy coatings were prepared on compacted graphite iron（CGI） through plasma cladding to strength the CGI substrate. The effects of heat treatment temperatures and times on the microstructure and mechanical properties of the CoCrFeNiMn coatings were investigated. After heat treatment, a single FCC phase was remained in the coating as compared to the deposited one, with smaller dendrites, larger dendritic spacing and more Cr-rich compounds precipitated between dendrites. The coatings’ microhardness was increased after heat treatment. After heat treated at 660°C for 90 minutes, the coating had the highest microhardness of 563±6.9 HV0.2, the lowest frictional coefficient of 0.71 and the smallest wear mass loss of 1.12 mg, and it had the best wear resistance.

With much more challenging scenarios encountered in engineering, traditional quadrotors couldn’t accomplish all desired missions perfectly. Task-driven based reconfigurable quadrotors have more latent capacity in environment with dense obstacles and narrow corridors. The translational reconfigurable quadrotors and rotational reconfigurable quadrotors are proposed in this presentation, assumptions, mathematical models and related motion control laws are given subsequently, in order to cope with hazard missions, model reference adaptive control laws are proposed, sufficient numerical simulations demonstrate the validity of the proposed control laws.

In the former mining district of La Carolina (southern Spain), waste materials were accumulated without first waterproofing the substrate. Additionally, these mining dams were abandoned without any type of restoration, conditions that present a significant risk of contaminating the surrounding soils and waters. Prior to carry out the necessary works for isolating these residues, morphological characterization of the contact with the base substrate is needed. For that purpose, in recent years, different indirect study techniques have been used, among which electrical to-mography stands out. In this work, a less common geophysical technique, magnetometry, both in its magnetic and gra-diometric modalities, is used as an alternative method to analyse the geometry and structure of a mining dam. The results obtained with this methodology are compared with the results provided by electrical techniques, as well as with direct data from mechanical surveys and aerial photo-graphs prior to waste deposition. The magnetic anomaly curves obtained with geometric models generated with the Mag2dc program were also analysed. This comparative study shows the use-fulness of magnetic prospecting in characterizing the base geometry of these mining structures and therefore the interest in its application to environmental characterization studies.

Tailings generated by mining account for the largest proportion of global waste from industrial activities. Copper is relatively uncommon world-wide, with low concentrations in sediments and waters, yet is very elevated around mining sites. On the Keweenaw Peninsula of Michigan, USA, jutting out into Lake Superior, 140 mines extracted native copper from the Portage Lake Volcanic Series, part of an intercontinental rift system. Between 1901-1932, two mills at Gay (Mohawk, Wolverine) sluiced 22.7 million metric tonnes (MMT) of copper-rich tailings (stamp sands) into Grand (Big) Traverse Bay. Here we examine: 1) 3D coastal elevation and reef bathymetry, 2) particle dispersal, 3) copper concentrations and leaching, plus 4) shoreline toxicity. About 10 MMT of tailings created a migrating coastal beach that stretches 7 km from the Gay pile to the Traverse River Seawall. Another 10 MMT are moving underwater on the coastal shelf, threatening Buffalo Reef, an important lake trout and whitefish breeding ground. Aerial photos, ALS (plane) LiDAR, and relatively inexpensive UAS (drone) surveys characterize shoreline structure and aid initial remediation. Because sands (natural beach quartz, stamp sand basalt) are silicates of similar density, particle dispersal is similar and challenging. However, stamp sand beaches contrast greatly with natural sand beaches in both physical profile and chemistry. Dispersing particles retain copper, and release toxic concentrations. Leaching is elevated by exposure to high DOC and low pH waters. Field experiments, shoreline seining, and benthic sampling confirm serious impacts on aquatic biota, supporting tailings removal.

Foodborne illnesses can be infectious and dangerous and most of them are caused by bacteria. Some types of common food-related bacteria exist widely in nature and pose a serious threat to both humans and animals, and can cause poisoning, diseases, disabilities and even death. Rapid, reliable and cost-effective methods for bacteria detection are of paramount importance in food-safety and environmental monitoring. Polymerase chain reaction (PCR), lateral flow immunochromatographic assay (LFIA) and electrochemical method have been widely used in food-safety and environmental monitoring. In this paper, the recent developments (2013-2023) covering PCR, LFIA and electrochemical method for various bacteria detection (Salmonella, Listeria, Campylobacter, Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli)) considering different foods types, analytical performances and the reported limit of detection (LOD) are discussed. It is found that the bacteria type and food sample type contribute significantly to the analytical performance and LOD. Detection by LFIA has higher average LOD (24 CFU/ml) than detection by electrochemical method (12 CFU/ml) and PCR (6 CFU/ml). Salmonella and E. coli in the Pseudomonadota domain usually have low LODs. LODs are usually lower for detection in fish and eggs. LFIA with gold and iron nanoparticles are prominent in the majority of articles of 26 CFU/ml and 12 CFU/ml respectively. Electrochemical method reveals that the average LOD is highest for cyclic voltammetry (CV) of 18 CFU/ml), followed by electrochemical impedance spectroscopy (EIS) of 12 CFU/ml and differential pulse voltammetry (DPV) of 8 CFU/ml. LOD usually decreases when replicate number increases until it remain unchanged. Exponential relations with (R²>0.95) between LOD of Listeria in milk by LFIA and electrochemical method with replicate number have been obtained. Finally, the review discusses the challenges and future perspectives (including the role of nanomaterials/advanced materials) to improve the analytical performance for bacterial detection.

The rapid integration of Information and Communication Technology (ICT) is transforming the traditional electrical grid into a {\em Smart Grid}. Smart grids enable two-way communication and improved monitoring and control between utilities and customers. However, due to its heterogeneous nature, public exposure, and weak security at low-powered devices, the Smart Grid has vulnerabilities to various malicious threats, adversaries, and cyber attacks, which may affect cost and service availability. Additionally, when the systems' confidentiality, integrity, or availability are compromised, the resulting fallout can threaten national security and have cascading effects on human lives. Given the extreme consequences of an attack, smart-grid technology must be thoroughly tested for correct operation and security {\em before} it is deployed. As a result, vulnerability testing of smart grids, not only for correctness but for security purposes, has been the subject of numerous studies by academics, government agencies, and private companies. This paper reviews the vulnerabilities associated with the smart grid and spotlights simulation as the vulnerability testing methodology conducted in recent pertinent research works. It also presents various security aspects of the smart grid, including grid applications, system and network infrastructure and components, cyber threats and attacks, simulation, and different mitigation techniques. Finally, we analyze the gaps in the current research works, focusing on simulation. We briefly present a real-time simulation testbed that mimics customer behaviour and integrates hardware in the loop to apply attack methods, analyze vulnerabilities and risk mitigation associated with the smart grid system, and propose future work to improve the current framework.

A human eye has about 120 million rod cells and 6 million cone cells. This huge number of light sensing cells inside a human eye will continuously produce a huge quantity of visual signals which flow into a human brain for daily processing. However, the real-time processing of these visual signals does not cause any fatigue to a human brain. This fact tells us the truth which is to say that human-like vision processes do not rely on complicated formulas to compute depth, displacement, and colors, etc. On the other hand, a human eye is like a PTZ camera. Here, PTZ stands for pan, tilt and zoom. We all know that in computer vision, each set of PTZ parameters (i.e., coefficients of pan, tilt and zoom) requires a dedicated calibration to determine a camera’s projection matrix. Since there is an infinite number of PTZ parameters which could be produced by a human eye, it is unlikely that a human brain stores an infinite number of calibration matrices for each human eye. Therefore, it is an interesting question for us to answer, which is to say whether simpler formulas of computing depth and displacement exist or not. Moreover, these formulas must be calibration friendly (i.e., easy process on the fly or on the go). In this paper, we disclose an important discovery of a new solution to 3D projection in a human-like binocular vision system. The purpose of doing 3D projection in binocular vision is to undertake forward and inverse transformations (or mappings) between coordinates in 2D digital images and coordinates in a 3D analogue scene. The formulas underlying the new solution are accurate, easily computable, easily tunable (i.e., to be calibrated on the fly or on the go) and could be easily implemented by a neural system (i.e., a network of neurons). Experimental results have validated the discovered formulas.

In Brazil, Brazilian borreliosis (BB), characterized molecularly, exhibits symptoms akin to Lyme disease (LD) but presents unique epidemiological, clinical, and morphological features. This study explores the incidence, diagnostic challenges, and awareness initiatives regarding this disease in Brazil. Employing a narrative review methodology, data were sourced from Pubmed, Ebsco, Google Scholar, and Web of Science without temporal constraints. Results reveal diagnostic complexities in Brazil due to the low sensitivity of conventional tests and the use of North American B. burgdorferi antigens. Despite challenges, epidemiological studies indicate an upswing in cases in humans and animals. Therefore, there is an urgent need to define new biomarkers, molecular strategies, or new antigenic targets to advance the development of vaccines and diagnostics. Early and accurate pathogen identification is crucial for active surveillance to comprehend and manage this zoonosis.

With the increasing interest in CM as a potential source of nutrients and bioactive compounds, there arises a necessity to delve into methods for its processing and drying. Over recent decades, a significant amount of research has been conducted on the chemical composition of CM and its potential health benefits. Consequently, this study is directed towards examining CM drying technology, including an analysis of the influence of different drying methods on its chemical composition and nutri-tional properties. The objective of this review is to systematically summarize the available literature on CM drying processes and their impact on its chemical composition. Special attention is devoted to comparing various drying methods such as freeze-drying, spray drying, and freeze-drying, as well as investigating factors affecting the quality of dried CM. To achieve this goal, we scrutinize a series of studies published between 2003 and 2022 to identify optimal drying methods that promote the maximum preservation of CM's nutritional components and bioactive compounds. Additionally, we explore possibilities for reducing drying time to enhance production efficiency. This research is grounded in the analysis of data from diverse scientific research databases, including Scopus and Google Scholar, encompassing a systematic review of scientific literature and a comparative analysis of the obtained results.

Amid escalating urbanization, devising rational commercial space layouts is a critical challenge. Leveraging machine learning, this study uses a Back-propagation (BP) neural network to optimize commercial spaces in Weinan City's central urban area. The results indicate an increased number of commercial facilities with a trend of multi-centered agglomeration and outward expansion. Based on these findings, we propose a strategic framework for rational commercial space development emphasizing aggregation centers, development axes, and spatial guidelines. This strategy provides valuable insights for urban planners in small and medium-sized cities in the Yellow River Basin and metropolitan areas, ultimately showcasing the power of machine learning in enhancing urban planning.

Cotton is the most ubiquitous and profitable fiber with diverse industrial and domestic applications. Grown in over 100 countries, it has a global market value of about $40 billion and employs over 350 million people from fields to textile mills, contributing about 7% of total labor-force recruitment in developing economies. Cotton has an indeterminate growth habit and an extensive tap root system affected by soil physicochemical and environmental conditions. There is a consensus among experts that conventional cotton cultivation still has a long way to attain sustainability, which is essential if cotton will maintain its competitive edge over other natural and synthetic fibers like hemp, polyesters, and rayon. Despite several efforts already committed to growing cotton sustainably, sustainability has eluded cotton cultivation globally because of the intense farm inputs (freshwater, pesticides, and heavy-duty equipment) needs, especially in developing economies. Some of the technological advancements towards achieving the goal of sustainable cotton cultivation include the development of new varieties, improved irrigation and mulching and precision agriculture techniques, application of remote sensing and Unmanned Aerial Systems (UAS) combined with image processing, and the introduction of autonomous and multi-purpose robotic platforms for growing and harvesting cotton. This review attempts to evaluate the successes already achieved by stakeholders in moving cotton towards sustainable production and identify areas where efforts are still needed to reach sustainable production and improved profitability goals for cotton with projections for future research directions.

Preventive Maintenance (PM) is a periodic maintenance strategy, which has great results for devices in extending their life, increasing productivity, and most importantly, help avoid unexpected breakdowns and their costly consequence. A preventive maintenance scheduling (PMS) is determining the time for carrying out PM, and it represents a sensitive issue in terms of impact on production if the time for the PM process is not optimally distributed. In this study, hybrid heuristic methods were used to solve the PMS problem, as genetic algorithm and Tabu research were adopted. The optimal solution was reached in a short time compared to previous studies in which optimal methods were used, integer programming and nonlinear integer programming. Also, sensitivity analysis was applied to measure the robustness and strength of the method used, where an optimal solution was obtained for all experiments and in record time. This method can be used for power plants in privet or public sectors, to generate an optimal PMS, to save money, and to avoid water or electricity cuts.

This paper analyses the application of deep learning techniques for predicting wave overtopping events in port environments using sea state and weather forecasts as inputs. The study was conducted in the outer port of Punta Langosteira, A Coruña, Spain. A video recording infrastructure was installed to monitor overtopping events from 2015 to 2022, identifying 3709 overtopping events. The data collected was merged with actual and predicted data for the sea state and weather conditions during the overtopping events, creating three datasets. We used these datasets to create several machine learning models to predict whether an overtopping event would occur based on sea state and weather conditions. The final models achieved a high accuracy level during the training and testing stages: 0.81, 0.73, and 0.84 average accuracy during training and 0.67, 0.48, and 0.86 average accuracy during testing, respectively. The results of this study have significant implications for port safety and efficiency, as wave overtopping events can cause disruptions and potential damage. Using deep learning techniques for overtopping prediction can help port managers take preventative measures and optimize operations, ultimately improving safety and helping to minimize the economic impact that overtopping events have on the port's activities.

This article examines the diagnosis of the Agricultural Innovation System (SIA) in the department of Tolima, Colombia, as part of a project led by the Colombian Ministry of Agriculture and Rural Development and the Technological University of Pereira (TUP), which also evaluated the National Agricultural Innovation System (NAIS) in regions such as Chocó, Bolívar, and Meta. A methodology was used that involved a survey with 58 questions on a Likert scale to 300 participants, evaluated with congruence and relevance indexes, identifying key variables in the operation of the Agricultural Innovation System (AIS). A survey was also applied to actors of the National Innovation System for Higher Education in Agriculture, A survey was also applied to map the participating actors in the regional agricultural innovation systems of Tolima to identify gaps in extension, innovation, development, sustainability, ICT, education and training. Among the conclusions, it stands out that the associativity subsystem presents the lowest lag and is close to a score of two on the scale of gaps, evaluation carried out among the five subsystems including extension, ICT, environmental aspects, and pub-lic policy. The department of Tolima shows low performance in innovation and ICT, while the extension is less lagging. In Chaparral there is a general lag, with innovation being the worst evaluated subsystem. Rovira obtains high scores in most subsystems, although innovation and ICT have lower scores. At the national and regional levels, innovation is low, and articulation among NARS actors is insufficient, which highlights the need to promote good practices, strategies, and projects.

Generative artificial intelligence (GenAI) has been developing with many incredible achievements like ChatGPT and Bard. Deep generative model (DGM) is a branch of GenAI, which is preeminent in generating raster data such as image and sound due to strong points of deep neural network (DNN) in inference and recognition. The built-in inference mechanism of DNN, which simulates and aims to synaptic plasticity of human neuron network, fosters generation ability of DGM which produces surprised results with support of statistical flexibility. Two popular approaches in DGM are Variational Autoencoders (VAE) and Generative Adversarial Network (GAN). Both VAE and GAN have their own strong points although they share and imply underline theory of statistics as well as incredible complex via hidden layers of DNN when DNN becomes effective encoding/decoding functions without concrete specifications. In this research, VAE and GAN is unified into a consistent and consolidated model called Adversarial Variational Autoencoders (AVA) in which VAE and GAN complement each other, for instance, VAE is good at generator by encoding data via excellent ideology of Kullback-Leibler divergence and GAN is a significantly important method to assess reliability of data which is realistic or fake. In other words, AVA aims to improve accuracy of generative models, besides AVA extends function of simple generative models. In methodology this research focuses on combination of applied mathematical concepts and skillful techniques of computer programming in order to implement and solve complicated problems as simply as possible.

Electrochemical Impedance Spectroscopy (EIS) is a powerful non-invasive technique used to characterize Lithium-ion cells. Its application allows to identify and track the evolutions of cell degradation processes within a short testing time. This review collects all the available works which have used EIS spectra either to characterize Li-ion cell degradation or to develop Electric Circuit Models (ECMs). The objectives of this work are: (i) to highlight the influence of different aging test conditions on the EIS spectra; (ii) to find the correlations between EIS spectra variations and the underlying degradation mechanisms and (iii) to list the available options to formulate ECMs from EIS spectra of aged cells. After an exhaustive analysis of the state-of-the-art, a critical review is presented to discuss the existing links between degradation mechanisms and the most reliable solutions to model them.

Abstract: Efforts for carbon emission reduction have been identified as a major climate change mitigation target in the Paris Agreement. The 26th Conference of Parties to the United Nations Framework Convention on Climate Change highlighted the worldwide effort for cleaner and greener mining, urging the mineral industry to embrace greener operational emissions reduction technologies and strategies. Ghana pledged at the Paris Conference to reduce CO2 emissions by 15% and increase renewable energy share to 10% of the national energy mix. Here the fundamental question is how Ghana’s mining industry can contribute to CO2 emission reduction efforts. This paper investigates barriers to low-carbon emission policy implementation among mining companies in Ghana. The questionnaire survey was conducted among Ghana’s four large-scale gold mining companies. As the sample number of available companies is limited, we used a descriptive analysis to assess the responses. The results show that the companies expressed widely different ways to respond to the issues of cost, a government policy/regulations for carbon emission reduction, and the adoption/acquisition of low-carbon technologies. Those companies that are relatively less prepared for this endeavor emphasized the uncertainties of securing sufficient energy in case of using low-carbon technologies. They also expressed a need for more trained workers to handle low-carbon technologies. All companies agreed with a expected high cost of adopting low-carbon options. There was a communication gap with the relevant government ministry about low-carbon mining options where the government should be able to facilitate the involvement of othe low technology providers, such as solar PV installation.

Long gone was the time when tumors were thought to be insular masses of cells, residing independently at specific sites in an organ. Now, researchers gradually realize that tumors interact with the extracellular matrix (ECM), blood vessels, connective tissues and immune cells in their environment, which is now known as the tumor microenvironment (TME). It is found that the interactions between tumors and their surrounding promote tumor growth, invasion and metastasis. The dynamics and diversity of TME cause the tumors to be heterogeneous and thus pose a challenge for cancer diagnosis, drug design and therapy. As TME is significant in enhancing tumor progression, it is vital to identify the different components in the TME. This review explores how different factors in the TME supply tumors with the required growth factors and signaling molecules to proliferate, invade and metastasis. We also examine the development of TME-targeted nanotheranostics over the recent years for cancer therapy, diagnosis and anticancer drug delivery system. This review further discusses the limitations and future perspective of nanoparticle based theranostics when used in combination with current imaging modalities like Optical Imaging, Magnetic Resonance Imaging (MRI) and Nuclear Imaging (PET and SPECT).

Latin America and the Caribbean offer the most favorable natural and social conditions for the emergence of cattle ranching that regenerate and maintains the ecosystem services on which life on Earth depends, that is energy efficient and that contributes to meeting fundamental human food needs. Unlike other major global producers, cattle farming in Latin America and the Caribbean is fundamentally based on pasture. Therein lies both its strength (due to the regenerative potential of well-managed pastures) and its vulnerability (due to the pervasive link between deforestation and pasture formation, especially in the Amazon, where 40% of the Brazilian herd is concentrated). The diversification of pastures (today marked by impressive monotony, with brachiaria accounting for 85% of the species in Brazil), the introduction of legumes and tree plantations within them, and the proper management of herds, open the way to the possibility of drastically reducing the area currently occupied by the activity (especially in the Amazon) while maintaining the supply of its products. Agricultural research has disseminated forms of moderate intensification of cattle ranching, which represent a low opportunity cost of animal feed and, at the same time, regeneration of ecosystem services that have so far been destroyed by the prevailing methods of farming.

In tissue engineering scaffolds take the place of the natural extra cellular matrix (ECM). The natural ECM is the extracellular part of animal tissue that usually provides structural support to the animal cells in addition to performing various other important functions. The design aspect along with the choice of the material for the artificial scaffold is very crucial to cell differentiation, adhesion, proliferation, and the transport of the growth factors or other bio molecular signals. In addition to the material and design of the scaffolds, it is necessary to replicate the normal physiological situation if the scaffold has to function as an implant. The cells have to be located in the porous scaffold to form a three dimensional assembly. The article discusses the important factors to be considered while designing a scaffold for tissue engineering and regenerative medicine.

The interest in the Spark Plasma Sintering (SPS) technique has continuously increased over the last few years. This article shows the possibility of the development of a SPS device used for material processing and synthesis both in both scientific and industrial applications. This work presents an example of processing Arc-Meleted (half-Heusler, cobalt triantimonide) and SHS-synthesized semiconductors (bismuth telluride) materials with SPS device. The system functionalities expansion is presented, showing the possible way of increasing the information amount obtained about SPS processes and using the SPS apparatus for conducting synthesis of materials and increasing reproducibility and accuracy of process parameters control.

Abstract: Field studies with large-stemmed plants Artemisia dubia (wormwood) have been carried out at Vėžaičiai Branch LAMMC since 2018. According to three years of experimental results, annual dry matter (DM) yield varied from 7.94 to 10.14 t ha-1. Growing conditions, nitrogen ap-plication level and harvesting time had significant impacts on Artemisia dubia productivity. This article presents the results of research on preparation and use of Artemisia dubia biomass for en-ergy conversion and evaluation of technological-technical and environmental parameters of these plants utilization for solid biofuel. For experiments were used 6 variants of Artemisia dubia samples, which were grown in 2021: plants were cut three times and two fertilization options were used: (1) no fertilization and (2) fertilization with 180 kg ha-1 of nitrogen fertilizer. These harvested plants were chopped, milled and were pressed into the pellets. The physi-cal-mechanical characteristics (mоisture content, density and strength) of Artemisia dubia pellets were investigated. During this study, it was found that the density in dry mass (DM) of pellets ranged from 1119.86 to 1192.44 kg m-3. The pellet moisture content ranged from 8.80 to 10.49%. After testing of pellet strength, it was found that the pellets which were made from plant bio-mass PK-1-1, were the most resistant to compression, they withstood 560.36 N of pressure. Dry fuel lower heating value (LHV) of pellets was sufficiently high and was very close to pine saw-dust pellets, it varied from 17.46±0.25 MJ kg-1 to 18.14±0.28 MJ kg-1. The ash content of burned pellets ranged from 3.62±0.02% to 6.47±0.09%. Emissions of harmful pollutants – CO2, CO, NOx and unburnt hydrocarbons (CxHy) did not exceed the maximum permissible levels. Summariz-ing the results of investigated properties, cоmbustion and emissiоns of Artemisia dubia pellets, it can be concluded that this biofuel can be used for production of pressed biofuel and it is charac-terized by sufficient high quality, efficient combustion and permissible emissions to the envi-ronment.

The transition to sustainable energy systems in the Middle East and North Africa (MENA) region addresses critical challenges of environmental protection, energy security, and socio-economic resilience. Using neo-institutional theory, this paper examines the intricate relationship between formal and informal institutions and their significant impact on the region’s energy transition. Despite the MENA region’s abundant renewable energy resources, numerous institutional barriers, such as governance inefficiencies, regulatory inconsistencies, and entrenched socio-cultural norms, significantly hinder this transition. Through a review of existing literature, this study presents a comprehensive analytical framework designed to overcome these barriers, with a focus on the Just and Sustainable Energy Transition model. This strategic model emphasizes equity, sustainability, and inclusive governance as pillars for reform. The study offers detailed recommendations for institutional change and underscores the importance of collaborative efforts among governments, industry stakeholders, and international partners to unlock the MENA region’s renewable energy potential, advance global sustainability goals, and ensure a more secure and resilient energy future.

Rabies persists as a longstanding issue in Zambia, despite being preventable. The current control measures, including dog vaccination, population control, and movement restriction, guided by ‘The Control of Dogs Act Chapter 247 of the Laws of Zambia’, have not yielded the desired impact in many areas of the country including Manyinga and Mwansabombwe districts. These two districts continue to report low dog vaccination rates, unrestricted dog movements, and escalating cases of animal and human rabies, along with dog bites. Aligned with global aspirations to achieve zero human rabies cases by 2030, this study scrutinizes the determinants and obstacles hampering the execution of rabies control initiatives in Manyinga and Mwansabombwe. Spanning approximately 11 months, this cross-sectional study gathered pre- and post-vaccination data from 301 households in Manyinga and 100 households in Mwansabombwe. Questionnaires probed knowledge, attitudes, and practices related to rabies prevention and control. A transect survey, key informant interviews, and assessment of rabies vaccination and dog bite records complemented the data collection. Findings revealed that 88% of respondents from both districts possessed knowledge about rabies, confirming affected species and transmission. Moreover, 76.8% in Manyinga and 88.6% in Mwansabombwe were acquainted with rabies prevention and control methods. Concerning dog owners, 89% were aware of rabies, 66% understood its prevention and control, and the majority identified bites as the primary mode of transmission. Vaccination coverage stood at 64% in Manyinga and 21% in Mwansabombwe. Notably, education and occupation exhibited a positive significant association with rabies knowledge. In terms of dog bite cases, Manyinga recorded 538 dog bite cases from 2017 to June 2022 while Mwansabombwe recorded 81 dog bite and 23 jackal bite cases from 2021 to June 2022. The study underscores critical knowledge gaps in rural areas and emphasizes the imperative for enhanced public education and awareness programs, improved rabies surveillance, free mass vaccination campaigns, and community engagement to augment vaccination coverage and knowledge about rabies.

To improve efficacy and safety of sunscreen emulsions, UV‐filter skin permeation could be kept as low as possible by reducing UV‐filter content or changing emulsion composition. In this work, different lipid phase ratio (12, 14 and 16% w/w) were assessed for their ability to affect the technological and sensory properties of O/W emulsions in which bemotrizinol (BMTZ), a broad spectrum sunscreen agent, was incorporated free or loaded into nanostructured lipid nanocarriers (NLC) to reduce its release from the vehicle and, hence, its skin permeation. The following technological properties were evaluated in vitro by suitable methodologies: spreadability, viscosity, pH, occlusion factor, BMTZ release, sun protection factor (SPF). Sensory attributes were assessed by trained panelists in three different phases: before/during pick‐up, rub‐in, after application. Raising the lipid phase ratio led to an increase of viscosity and to a corresponding drop of spreadability while the incorporation of BMTZ‐loaded NLC determined a decrease of occlusion factor and an increase of SPF. No BMTZ release was observed from all emulsions. Sensory attributes were mainly affected by lipid phase ratio. These results suggest that lipid phase ratio and BMTZ incorporation into NLC could contribute to determine technological and sensory properties of O/W emulsions.

Over the last two decades, a considerable amount of equipment has been acquired (spreaders, seeders, sprayers, among others) to respond to the challenges of Precision Agriculture (PA) concept. Most of this equipment has been purchased at a high cost. However, many of them, despite still being functional and equipped with sensors, actuators, and electronic processing units capable of adjusting to variations in speed, have become obsolete in terms of communication, and incompatible with new monitoring and control systems based on the “Isobus” protocol. This work aims to present a solution for updating the control system (“Ferticontrol”) of a “Vicon RS-EDW” spreader with variable rate application (VRA), making it compatible with the “InCommand” system from “Ag Leader”. The solution includes low-cost “Arduino” and “Raspberry Pi” microcontrollers and open-source software. The development shows that it is possible to implement a solution that is accessible to farmers in general. It also provides a niche business opportunity for young researchers to set up small technology-based enterprises associated with universities and research centers. These partnerships guarantee permanent innovation and represent a decisive step towards modern, technological, competitive, and sustainable agriculture.

Keywords: Barriers; Facilitators; Sepsis; Sepsis Six Guidelines; Nurses.

The objective of this study was to analyze the mental workload using EEG and eye tracking data and classify it using machine learning algorithms. The machine learning model was developed based on the simultaneous recording of eye tracking and EEG measurements during the experimental process. The experiments involved 15 university students, consisting of 7 women and 8 men. Throughout the experiments, the researchers utilized the n-back memory task and the NASA-Task Load Index (TLX) subjective rating scale to assess various levels of mental workload. The findings revealed that as the task difficulty increased, there was an increase in the diameter of both the right and left pupils, the number of fixations, the number and duration of saccades, and the number and duration of blinks. Conversely, variables related to fixation duration decreased. The EEG results indicated that theta power in the prefrontal, frontal, and front central regions increased with task difficulty. Additionally, alpha power increased in the frontal regions but decreased in the temporal, parietal, and occipital regions as the task became more challenging. Furthermore, low beta power significantly decreased in almost all brain regions as the task difficulty increased. In terms of the four-class classification problem, the mental workload level can be predicted with an accuracy rate of 76.59% using 34 selected features. This study has made a significant contribution to the literature by presenting a four-class mental workload estimation model that utilizes different machine learning algorithms.

This study explores the barriers and opportunities faced by women in supply chain leadership, a field traditionally dominated by men. Through in-depth interviews and thematic analysis, it uncovers the pervasive cultural and societal biases that undermine women's perceived competence and suitability for leadership roles. These biases, often rooted in deep-seated stereotypes, influence hiring and promotion decisions, creating significant obstacles for women. Structural and organizational barriers, such as the lack of formal diversity policies, flexible working arrangements, and adequate mentorship, further hinder women's career progression. The dual burden of professional and domestic responsibilities also disproportionately affects women, limiting their availability for work-related travel and extended hours, which are often required in supply chain roles. Despite these challenges, the study identifies several pathways to promote gender diversity in supply chain leadership. Organizational commitment to diversity and inclusion, flexible working policies, and comprehensive mentorship programs are crucial in supporting women's advancement. Education and professional development opportunities are essential in equipping women with the necessary skills for leadership roles. Additionally, fostering an inclusive corporate culture that values diverse perspectives and addresses discrimination is vital for creating a supportive environment. Broader societal and policy-level changes, such as government and industry initiatives promoting gender diversity, are also necessary. The integration of emerging areas like sustainability, entrepreneurship, emotional intelligence, marketing, and supplier relationship management offers new opportunities for women to contribute to the industry's evolution. By addressing these barriers and leveraging the identified opportunities, it is possible to create a more inclusive and equitable supply chain industry, benefiting both the industry and society.

In the construction sector, the integration of biobased materials has emerged as a pivotal aspect of EU policies, aimed at promoting sustainable practices throughout the value chain to mitigate resource consumption and carbon emissions. This paper explores the development and validation activities of a bio-based façade system within the Basajaun H2020 project, focusing on enhancing the utilization of biobased components within building envelopes to replace conventional solutions with eco-friendly alternatives. This paper reports the methodologies employed to detect requirements and outline the testing protocols undertaken to validate the façade system design devised within the project focusing on the original façade components as the bio composite profile. Vision and opaque façade modules are prototyped and tested following curtain wall standards standard for performance and acoustic assessments, to showcase the efficacy of the developed solution. The conducted tests demonstrate the feasibility of integrating bio-based components into building envelopes, aligning with project expectations, and prevailing standards for curtain wall façade solutions. Notably, the designed façade system meets technical conditions and project objectives. Nevertheless, the research underscores the need for further refinements to facilitate solution industrialization and explore broader market applicability. Future efforts will focus on addressing these improvements and assessing the scalability of the solution.

The construction industry is a resource and energy intensive industry and thus, has been criti-cized due to rising environmental concerns. As a result of that it has gained heightened interest in the concept of Circular Economy (CE) over the last decade to its ability to promote the slowing, reducing, and closing production and consumption cycles of materials and products used in the construction practices. Digital technologies hold potential to enhance the construction industry's ability to integrate the concept of CE in its practices. However, a clear understanding of digital technology (DT) related barriers that hinder practical implementation of CE, appears to be lacking within the sector. In light of this, this study aims to identify the barriers to adopting DTs to im-plement CE practices in the construction industry. To achieve this aim, a systematic literature review was conducted by reviewing twenty-three (23) relevant papers published until January 2024 in Scopus database. The VOS viewer software was used to perform a co-occurrence analysis of keywords to identify new and popular study areas in the field and content analysis was used to analyse the major barriers to adapt DTs to implement CE in the construction industry. The study identified thirty-four (34) barriers to use DTs to implement CE and these were categorized into nine areas such as: infrastructure, organizational, regulatory, standardization, investment, nature of the construction industry, technological, stakeholder and data related barriers. These findings will be beneficial for construction practitioners and policy makers to adopt DTs to integrate CE practices in the construction industry.

Since the 1980s, a growing interest in goat milk was noticed due to the nutritional values and health benefits of this milk, which resulted in increasing goat populations and milk production worldwide. This comprehensive review elaborates on goat milk composition compared to other types of milk. It is also an overview of goat milk production, properties, nourishment-value, applications in dairy products, and potential health benefits. Goat milk composition and its characteristics are slightly different from other types of milk and can be utilized to manufacture many dairy products. Fresh goat milk and goat milk products (e.g., yogurt and kefir were found to provide various potential health benefits, such as anti-inflammatory, prevent cardiovascular disease, anti-diabetic and antihypertensive, strengthen bones, boost immunity, and improve metabolism.

This paper provides attempts to formalize Hayek’s theory of knowledge. It has been theoretically shown that exponential income distribution is a spontaneous order of the well-functioning market economy. We show that this theoretical result is supported by the empirical evidence from the United Kingdom and China. In particular, we empirically show how the income structure of China evolved towards an exponential distribution after the market-oriented economic reformation. Furthermore, we strictly prove that, if the income structure of an economy obeys an exponential distribution, the income summation over all households leads to an aggregate production function with Hicks-neutral-like technical progress, in which the technology factor is exactly equal to society’s information stock that is a result of combining all of decentralized decisions.

Abstract: Canine ehrlichiosis is a zoonotic disease transmitted by ticks, posing a formidable challenge to both veterinary and public health sectors worldwide. Across continents and regions, the prevalence rates of Ehrlichia canis exhibit significant variation, underlining the necessity for a nuanced and globally informed approach to understanding and combating this disease. The review navigates through this complexity, shedding light on the intricate pathogenesis of the illness. Central to this understanding is the bacterium's adept manipulation of the host's immune response, contributing to the diverse clinical manifestations observed in infected animals. Diagnostic methodologies, crucial for timely intervention and management, are subjected to critical assessment. From traditional microscopy to modern molecular techniques and serology, each approach is scrutinized for its strengths and limitations. By acknowledging these nuances, the review aims to equip practitioners with the knowledge necessary to make informed diagnostic decisions. A central tenet of this review is the advocacy for an integrated "One Health" approach. By leveraging advancements in genomics, proteomics, and artificial intelligence, there is a potential to enhance diagnostic accuracy and develop innovative therapeutic and preventive strategies globally. This collaborative approach recognizes the interconnectedness of human, animal, and environmental health, offering a holistic framework for tackling complex zoonotic diseases like canine ehrlichiosis. In conclusion, this review serves as a beacon of knowledge, illuminating the multifaceted landscape of canine ehrlichiosis. Through its synthesis of scientific literature and emphasis on methodological rigor, it provides a foundation upon which future research and interventions can be built. With a unified commitment to "One Health" principles and the integration of cutting-edge technologies, there exists the potential to mitigate the impact of this disease and safeguard both animal and human well-being worldwide

This study investigated the factors affecting consumers’ acceptance to use cashless payment services in Malaysia through the construction of the Cashless Society Acceptance (CSA) model. The Technology Readiness Index 2.0 and Unified Theory of Acceptance and Use of Technology 2 were employed to create the CSA model. A total of 434 questionnaires were collected from Malaysian consumers, aged 18 years and above. The results show that Perceived Usefulness, Perceived Ease of Use, and Discomfort have the most significant influence on the consumers’ acceptance of cashless payment services with R-square of 71.4%.

This study aims to identify benefits and barriers to distance education, particularly from the perspective of teachers in Saudi Arabia. As the applied data collection tool, a questionnaire was distributed to the general education teachers in three districts. The sample size of the study was 1076 teachers. The results revealed that despite several benefits gained from distance learning, there are also some barriers. Teachers found that the most important advantage in distance learning is the acquisition of technical skills during the online teaching processes, they learn more and use digital education platforms, they have sufficient time to prepare the scientific content, they were able to provide adequate technical solutions for their courses, and they have the opportunity to use multiple media to deliver their courses. With the introduction of distance learning, teachers have explored new ways to deliver course contents to students. It has fostered better ways to provide more interactive real-time and on-demand teaching and learning using modern technology, thus, helping teachers become familiar with the use of electronic resources. It seems that teachers invest in technical methods to enhance students’ performance. Also, teachers reported some obstacles that they face during remote teaching. Most of these problems are connection problems applied with devices and the internet, lack of students’ motivation to learn in distance, problems associated with urban learners.

A quantum particle constrained between two high potential barriers provides a paradigmatic example of a system sustaining quasi bound (or resonance) states. When the system is prepared in one of such quasi bound states, the wave function approximately maintains its shape but decays in time in a nearly exponential manner radiating into the surrounding space, the lifetime being of the order of the reciprocal of the width of the resonance peak in the transmission spectrum. Naively, one could think that adding more lateral barriers would preferentially slow down or prevent the quantum decay since tunneling is expected to become less probable and because of quantum backflow induced by multiple scattering processes. However, this is not always the case and in the early stage of the dynamics quantum decay can be accelerated (rather than decelerated) by additional lateral barriers, even when the barrier heights are arbitrarily large. The decay acceleration originates from resonant tunneling effects and is associated to large deviations from an exponential decay law. We discuss such a counterintuitive phenomenon by considering the hopping dynamics of a quantum particle on a tight-binding lattice with on-site potential barriers.

This comprehensive critical review shows how green buildings and energy optimization solutions improve indoor air quality as well as environmental quality (IEQ) and human health. Electricity-efficient green buildings create a better indoor atmosphere and save electricity. Green buildings improve occupant well-being through IAQ, thermal comfort, acoustics, and lighting. Renewable energy, green construction materials, and intelligent technologies increase sustainability and reduce environmental impact. Environmental hazards, architectural design, and societal variables can improve indoor air quality and subsequently reduce health risks linked with poor air quality. The evaluation highlights the pros and cons of low-cost IAQ sensors and equipment. These devices provide valuable insights, but calibration and validation using reference equipment are necessary to ensure accuracy and reliability. Architects, engineers, environmentalists, and policymakers are essential in creating green buildings with high IEQ. Prioritizing occupant comfort, health, and productivity ensures a sustainable and healthy future for future generations. However, continual monitoring and research are needed to improve green building practices and overcome construction problems. Intelligent models for continual on-field calibration of low-cost sensors may improve performance. Green buildings benefit occupants and the environment by optimizing energy use and using IAQ monitoring technologies.

Cigarette butts (CBs) are the most diffuse waste in the world, often abandoned in the environment without proper disposal. They are dangerous because of the numerous harmful chemicals poten-tially released in the environment. There are, in literature, several technological options for CB recycling, but some critical concerns could affect their effectiveness due to the quality and quantity of CB litter collected in the proper way. The present paper focuses on policy framework social behavior, waste collection and transport and technological processes. The Extended Producer Responsibility scheme for CBs is proposed at European level as an action to tackle CB litter and encourage sustainable product development. The CB waste collection and transport is a key step for bringing CB to the recycling process. The main concern is the small quantity of CBs collected: 0.06 % of the municipal waste and 0.18 % of the unsorted waste in the administrative area of Pe-rugia. Another crucial issue is the need for behavioral interventions to increase education and awareness of smoker citizens, addressing the discrepancy between smokers’ behaviors and beliefs.

Water mist fire suppression technology has attracted an increasing interest from the field of fire protection services such as fire safety for buildings, ships, spacecraft, libraries and museums due to its non-toxic and high efficiency in the suppression of a wide variety of fires. To support the technological development of water mist fire suppression system and its application areas, this review introduces the concept of water mist system and discusses its suppression mechanisms in comparison with other fire protection systems. The recent application areas of water mist system are surveyed for class A fires involving combustible solid materials such as wood, paper and textiles; class B fires involving flammable liquids such as petrol, oils, lubricants, paints and waxes; class C fires involving flammable gasses such as natural gas and liquefied petroleum gas; fires involving electrical (class E) equipment such as computers and information technology facilities; and the class F fires involving flammable cooking oils and fats. Finally, the paper concludes the review by identifying the current research trends, and providing the future direction for water mist technology and applications.

Green carbon-based materials (GCM), i.e. carbon materials produced using renewable biomass or recycled wastes, ought to be used in order to processes become sustainable and carbon neutral. Carbon nanomaterials, like for example carbon dots and nanobichar families, and carbon materials, like for example activated carbon and biochar substances, are sustainable materials with great potential to be used in different technology applications. In this review, the following four applications were selected, and the works published in the last two years (since 2022) critically reviewed: agriculture; water treatment; energy management; and, carbon dioxide reduction and sequestration. GCM improved the performance of the technological applications under revision and play an important role in the sustainability of the processes, contributing to the mitigation of the climate change, namely by reducing emission and increase sequestration of CO2eq..

Ecological corridors function as a viable way to mitigate the environmental impact arising from forest fragmentation by interconnecting forest fragments through various techniques. In this context, the objective of this study is to propose a route for the implementation of an ecological corridor in the Itapemirim river watershed. The specific objectives were: (i) to delimit the permanent preservation areas (APP) of the Itapemirim river watershed and compare land use and land cover in the delimited areas; (ii) to calculate landscape ecology indices and select the forest fragments with the highest potential for ecological corridor implementation using Fuzzy logic; (iii) to assess costs and trace the best route for ecological corridor implementation, considering distance and physical impediments; (iv) to assess land costs and expropriation costs to delimit the ecological corridor in the study area. To map land use and land cover, the MapBiomas platform was used, based on Landsat 8 satellite images. The permanent preservation areas were delimited according to criteria established by Law No. 12.651 of May 25, 2012, which establishes parameters, definitions, and limits for APP. The characterization and structural quantification of some landscape ecology indices were performed using the QGIS 3.26 computational application, through the LecoS 3.0.1 plugin and Fragstats 4.2. The connected forest fragments were the Caparaó National Park, the Serra das Torres State Natural Monument, and the fragments selected through the application of Fuzzy logic to the landscape ecology indices. The corridor was delimited according to the lowest cost route, considering land use and land cover, APP, fragment potential, slope, and subnormal clusters. For each cost raster image, its respective statistical weights were calculated using the Analytic Hierarchy Process (AHP) hierarchical method, as well as for the analysis of priority areas for forest restoration, considering land use and land cover, APP, pedology, lithology, and biological importance. The interconnection between protected areas and fragments with the ecological corridor followed the orientation described by CONAMA nº 09/96. Based on the development of the work, the following results were identified: the highest land use and land cover class is pasture. Of the area designated for permanent preservation, 68.58% is in conflicting use with the legislation. The bare land value per hectare of the pasture class is the second highest among the bare land value per LULC values, representing 64.28% of the total. The priority area map showed that 31.86% of the area was classified as of very high or high importance and 42.97% as low or very low priority for forest restoration. Thus, it is concluded that the least cost path algorithm associated with the result generated by the multi-criteria decision method (AHP) constitutes an important tool for planning and implementing an ecological network by taking into account the primary factors for decision-making regarding the location of the best route.

A reduction in population sodium (as salt) consumption is one of the most cost-effective strategies to reduce the burden of cardiovascular disease and it is a global health priority. High potassium intake is also recommended to reduce cardiovascular disease. To establish effective policies for setting targets and monitoring effectiveness within each country, the current level of consumption should be known. Greece lacks data on actual sodium and potassium intakes. The aim of the present study was therefore to assess dietary salt (using sodium as biomarker) and potassium intakes in a sample of healthy adults in northern Greece and to determine whether adherence to a Mediterranean diet is related to different sodium intakes or sodium-to-potassium ratio. A cross-sectional survey was carried out in Thessaloniki greater metropolitan area (northern Greece) (n=252, aged 18-75 years, 45.2% males). Participants’ dietary sodium and potassium intakes were determined by 24h urinary sodium and potassium excretions. In addition, we estimated their adherence to Mediterranean diet by the use of an 11-item MedDietScore (range 0-55). The mean sodium excretion was 175 (SD 72) mmol/day, equivalent to 4,220 (1,745) mg of sodium or 10.7 (4.4) g of salt per day and potassium excretion was 65 (25) mmol/day, equivalent to 3,303 (1,247) mg/day. Men had higher sodium and potassium excretions compared to women. Only 5.6% of the sample had salt intake <5g/d, which is the target intake recommended by the WHO. Mean sodium-to-potassium excretion ratio was 2.82 (1.07). There was no significant difference in salt or potassium intake or their ratio across MedDietScore quartiles. No significant relationships were found between salt intake and adherence to Mediterranean diet, suggesting that the perception of the health benefits of the Mediterranean diet does not hold when referring to salt consumption. These results suggest the need for a larger nation-wide survey on salt intake in Greece and underline the importance of continuation of salt reduction initiatives in Greece.

The global energy crisis is a significant issue, particularly in developing countries like Ethiopia, where traditional fuels such as wood and charcoal are predominantly used to meet energy demands in urban and rural areas. Despite Ethiopia's substantial charcoal production, the use of inefficient charcoal cookstoves exacerbates fuel consumption, forest degradation, and environmental damage. To address this, various improved charcoal cookstoves (ICS) have been introduced in urban and semi-urban communities in Wereta Town, located in the Amhara Regional State of Ethiopia. This study aims to evaluate household perceptions and identify barriers to the adoption of ICS in the Wereta district. The assessment involved a survey of 308 households using a structured cross-sectional method and analyzed five types of improved cookstoves: clay stoves, insulated clay cylinder stoves, non-insulated rocket stoves, insulated rocket stoves, and non-insulated cylindrical stoves. The study employed various socio-economic variables and utilized both cross-tabulation frequency factors and linear regression statistical analysis through SPSS 20 to identify factors influencing the adoption of ICS. The linear regression results indicated that marital status, income level, family size, and age significantly impact ICS adoption (p-value < 0.05), while the place of cooking, educational level, household decision-making, and the role of societal stakeholders showed no significant impact. This suggests that ICS adoption is primarily influenced by household income levels and family size.

The aim of this article is to review hydrogen combustion applications within the energy transition framework. Hydrogen blends are also included, from the well known hydrogen enriched natural gas (HENG) to the hydrogen and ammonia blends whose chemical kinetics is still not clearly defined. Hydrogen and hydrogen blends combustion characteristics will be firstly summarized, in terms of standard properties like the laminar flame speed and the adiabatic flame temperature, but also evidencing the critical role of hydrogen preferential diffusion in burning rate enhancement and the drastic reduction in radiative emission with respect to natural gas flames. Then, combustion applications in both thermo-electric power generation (based on internal combustion engines, i.e., gas turbines and piston engines) and hard-to-abate industry (requiring high temperature kilns and furnaces) sectors will be considered, highlighting the main issues due to hydrogen addition related to safety, pollutant emissions, and potentially negative effects on industrial products (e.g., glass, cement and ceramic).

In the wake of COVID-19, there is an urgent need for a diverse public health work force to address problems presented or exacerbated by the global pandemic. Educational programs that create our work force both train and shape the makeup of access through graduate applications. The Graduate Record Exam has a number of standing issues, with additional barriers created by the pandemic. We trace the GRE waiver movement over several years, focusing on the gradual adoption in CEPH accredited programs and the rapid expansion of temporary waivers as a response to testing access. Going forward, we need to consider gaps in waivers during the pandemic and how this data can be used to shape our future use of the GRE.

Laser Powder Bed Fusion (LPBF), as a transformative technology in the field of additive manufacturing, offers unprecedented design flexibility and material efficiency. This review paper delves into the latest advancements in LPBF technology and the various alloys used in the process, including titanium alloys, aluminum alloys, nickel-based superalloys, steel alloys, copper alloys, and high-entropy alloys. For each alloy category, we discuss their specific applications, performance characteristics, and challenges faced in LPBF usage. The paper discusses important technological breakthroughs, including innovations in laser systems, scanning strategies, and in-situ monitoring technologies, which have enhanced the precision and reliability of LPBF.

The purpose of this paper is to explore the extent to which traditional economic policies can be oriented by sound practices. It is becoming widely accepted that sustainable economic growth (and not only economic growth) is the final target of economic policies; but most economic policies are applied just looking to the short-run without taking in account the long-run perspective. Our aim will be to show how a sustainable economic policy-making would be possible, making compatible the stabilization of the economy in the short-run with a sustainable economic growth in the long-run. We confront the design of economic policies with the 17 goals of the 2030 Agenda. We argue that all sustainable development goals can be attained by the design and implementation of sustainable economic policies. Finally, to illustrate this point we will conduct a simulation exercise to show under which combinations of demand policies technological shocks would promote a path of sustainable growth. Our results will provide a reference framework for a sustainable economic policy-making.

Variability is the predisposition of phenomena to assume different values over time. Variability is higher when the differences of cases from each other are larger or diverge from a specific value, such as arithmetic mean. This study focuses on the variability of research topics within and between research fields to explain, whenever possible, how the variability shapes the structure and dynamics of technological trajectories. Analysis of variability here applies the entropy and variance decomposition on main research fields in quantum technologies. Empirical evidence shows that variability in research topics is inversely proportional to the age of research fields. Inductive implications are that higher variability in research topics of recent scientific fields is due to uncertain dynamics that generates a heterogeneity of different technological trajectories some of them can growth and develop towards fruitful directions others can be dismissed. Hence the variability seems to be one of the drivers that shapes technological evolution and can provide policy and managerial implications to improve the scientific and technological forecasting that may support appropriate decisions of R&D investments towards promising research fields and technologies.

A proposed interpretation of the characteristics and causes of the variation in science dynamics for technological evolution is described. The theoretical approach focuses on variability in research topics that guide scientific and technological evolution. Statistical method verifies the proposed approach by applying entropy, measures of dispersion and variance decomposition. The statistical evidence, using data of four main research fields in quantum technologies, suggests the following empirical properties: a) the growth of heterogeneity in research topics is inversely proportional to the age of research fields: recent research fields have a higher variability between topics with uncertainty in evolutionary dynamics, whereas older research fields have a lower variability and more concentration in specific research topics with stable evolution towards clear directions; b) the nature of research fields has a systematic effects in variability guiding the evolution of technologies. The theoretical approach and findings clarify main characteristics and causes of the evolution of science and technologies considering the underlying homogeneity or heterogeneity in research topics, providing main implications to improve the scientific and technological forecasting that may support appropriate R&amp;D investments towards promising research fields and technologies

Due to species barriers and poor adaptability to new host environments, few pathogens cause global pandemics. But, SARS-CoV-2 is one exception with its high transmissivity and delayed onset of symptoms. Fortunately, the world was able to tap on the technologies especially the maturing RT-qPCR designed to combat SARS to launch an initial offensive on SARS-CoV-2. These initial efforts may have bought time for scientists to develop more refined diagnostic tests that specifically target SARS-CoV-2. This article describes the effort put forth by the biotech industry and academia in Singapore to develop diagnostic tests that aid the early detection of positive cases, and thereby help contain the virus. Direct tests such as RT-qPCR and antigen rapid test profile the virus nucleic acid and surface proteins, respectively. But, of equal importance in case detection and treatment is serological tests that measure the relative abundance of IgM and IgG which is indicative of infection phase and quality of immune response in positive cases. Other tests such as isothermal amplification, CRISPR-based diagnostics and breath tests are also in development or at initial field deployment, and would undoubtedly provide valuable use experience useful for the development of molecular assays to detect and combat the next pathogen of global concern.

This work is the first scientific study on the development of the composition and technology of a new antioxidant agent based on a combination of extracts of tree medicinal plants and the study of the technological parameters of a dry extract. Further draw up technological regulations for their production and their introduction into production. This study aims to the antioxidant activity of dry extract "Antioxim" was determined. In order to create this herbal collection of plant, first of all, to study the technological parameters of raw materials, such as mass size, porosity, dispersibility, free volume of layers of raw materials, water absorption coefficient of extractives, and technological process efficiency to study the effect of parameters, developed at the Department of "Industrial Technology of Medicines" of the Tashkent Pharmaceutical Institute:

Technology development changes society and society demands new and innovative technology development. We analyze technology to understand society and technology itself. Many researches have been introduced in various fields. Most of them were about patent analysis. This is because detailed and accurate results of research and development are patented. In this paper, we study on new patent analysis method based on count data model and Bayesian regression analysis. Using count data model, we analyze the technological keywords extracted from the collected patent documents. We use the posterior distribution of Bayesian statistics to reflect the experience and knowledge of the relevant technological experts in the analysis model. Moreover, we apply the proposed model to finding sustainable technologies. Finding and developing sustainable technologies is an important activity for companies and research institutes to maintain their technological competitiveness. To illustrate how our modeling could be applied to real domain, we carry out a case study using the patent documents related to artificial intelligence.

In the paper, the author takes stock of the conceptual reflection and empirical studies described in the current scientific literature on responsible innovation in the context of the emergence of Responsible Research and Innovation (RRI) concept. RRI has been promoted in the European Union as a part of the Europe 2020 strategy with the objective of making research and innovation more sustainable and inclusive. As more than half of the EU’s firms declare conducting innovation activities RRI problematic becomes more relevant than ever. There remain many open questions, unresolved dilemmas and empirical white spots that call for more research in this field. This paper’s main focus is the problem of RRI acceptance as a global framework for responsible innovation and the scarcity of suitable instruments that may help industry understand and adopt this concept. The main contribution of this paper are: the critical analysis of the RRI concept and its implications for industry, proposing a concept of RRI index for innovating enterprises.

A harmful impact of climate change and global warming has concerned various sectors of the international community. Numerous energy policies aiming at climate change mitigation have been implemented on a national and global scale. Renewable Energy Technologies (RET) play a critical role in enhancing sustainable solutions that significantly limit greenhouse gases (GHG) emissions. Such innovative technologies can facilitate energy transition through providing e.g. energy security, sustainable development, or effective usage of indigenous resources. However, the commercialization of RET becomes extremely challenging. The barriers can be of a different nature, although in this study the focus has been put on socio-economic and regulatory issues. In fact, there is ample evidence that energy policies play a central role in supporting renewables adoption. It is also claimed that RET require the whole ecosystem to support their successful diffusion. In this study, we explore multifarious barriers for a widespread RET diffusion in two European Union countries: Finland and Poland, indicating the most common barriers existing in the literature as well as analyzing major bottlenecks in the viewpoint of renewable energy companies’ executives. We also present statistics of the most commonly used RET in these countries in order to express the diffusion issues more appropriately. The outcomes of this study provide useful insight for the researchers in the energy transition field as well as practical managerial and regulatory implications aimed at overcoming these challenges.

Women in science, technology, engineering, and mathematics (STEM) fields are under-represented, and women are also less likely than men to be in leadership positions generally. Little is known about the intersection of these areas: women in leadership in STEM. To determine what sort of barriers and assistance female STEM leaders have encountered, a survey was developed asking women who are in academic leadership positions in STEM about their experiences. The main barriers were similar in the STEM area and in leadership: balancing work/home life, devaluing of achievements, and imposter syndrome. The main two types of assistance in both STEM and leadership were support from spouse/partner, and encouragement from peers. The main barriers women encounter are cultural and will take time to overcome. The main assistance women have had comes from people, not training or institutional structures.

Artificial intelligence and Quantum science supports path-breaking technologies for main technological change. The investigation goal of this study is to examine their scientific and technological development to explain drivers of these disruptive technologies. Analyses of data, based on publications and patents in quantum science and artificial intelligence, with a technometric model show that that quantum science and technology has a growth rate of 1.07, artificial Intelligence ha a rate of growth of 1.37, whereas the interaction of quantum science and artificial intelligence generates a convergent technological trajectory that has an accelerated rate of growth of 1.58, higher than trends of these technologies taken individually. These findings here clarify one of the fundamental determinants of the evolution of path-breaking technologies that can support decision making of policymakers, technology analysts and R&amp;D managers to direct R&amp;D investments towards fruitful inter-relationships between radical technologies that foster scientific and technological change in knowledge economies.

How do sensor research and technologies grow over time? This paper applies the network analysis with a new computational approach to map the structure and evolution of sensor research and technologies over a 30-year time frame (1990-2020).The goal of this study is to analyze the evolution of sensor research for forecasting emerging scientific and technological trajectories. Results show that the scientific interaction within ecosystem (represented with networks) of sensor generates a co-evolution of scientific fields supporting the accelerated growth of different technological tra-jectories, such as: wireless sensors, fiber optic and optical sensors, gas sensors and biosensors. These results suggest main theoretical implications that explain the evolution of sensor research with critical aspects of innovation management to support R&D investments towards new technological trajectories having a high potential of growth.

Information is commonly considered as a mathematical quantity that forms the basis of computing. In mathematics, information can propagate instantly, so its transfer speed is not the subject of information science. In all kinds of implementations of computing, whether technological or biological, some material carrier for the information exists, so the information’s propagation speed cannot exceed the speed of the carrier. Because of this limitation, for any implementation, one must consider the transfer time between computing units. We need a different mathematical method to take this limitation into account: classic mathematics can only describe infinitely fast and infinitely small computing system implementations. The difference between the mathematical handling methods leads to different descriptions of the behavior of the systems. The correct handling also explains why biological implementations can have lifelong learning and technological ones cannot. The conclusion about learning evidences matches others’ experimental evidence, both in technological and biological computing.

Inhibition of amyloid fibril formation could benefit patients with systemic amyloidosis. In this group of diseases, deposition of amyloid fibrils derived from normally soluble proteins leads to progressive tissue damage and organ failure. Although many small molecules have been proposed as inhibitors of amyloid formation, few have been successful in clinical trials. Amyloid formation is complex and several individual steps could be targeted by small molecules. However, the exact mechanism of action for a molecule is often not known, which impedes medicinal chemistry efforts to develop more potent molecules. Furthermore, commonly used assays are prone to artifacts that must be controlled for. Here, potential mechanisms by which small molecules could inhibit aggregation of immunoglobulin light chain dimers, the precursor proteins for AL amyloidosis are studied in assays that recapitulate different aspects of amyloidogenesis in vitro. One molecule reduced unfolding-coupled proteolysis of light chains, but no molecules inhibited aggregation of light chains or disrupted pre-formed amyloid fibrils. This work demonstrates the challenges associated with drug development for amyloidosis, but also highlights the potential to combine therapies that target different aspects of amyloidogenesis.

CdZnTe (CZT) is a new type of compound semiconductor that has emerged in recent years. Compared to other semiconductor materials, it possesses an ideal bandgap, high density, and high electron mobility, rendering it an excellent room-temperature composite semiconductor material for X-ray and γ-ray detectors. Due to the exceptional performance of CZT material, detectors manufactured using it exhibit high energy resolution, spatial resolution, and detection efficiency. They also have the advantage of operating at room temperature. CZT array detectors, furthermore, demonstrate outstanding spatial detection and three-dimensional imaging capabilities. Researchers worldwide have conducted extensive studies on this subject. This paper, building upon this foundation, provides a comprehensive analysis of CZT crystals and CZT array detectors, summarizes existing research to offer valuable insights for envisioning new detector methodologies.

The present study aims to analyze scientific production about technological cooperation networks in biotechnology sector, based on bibliometrics network analysis. We used the Gephi software to identify groups of partnerships, proving that the cooperation relationship is a practice used, re-sulting technological development. Findings identify that in the path for new resources that com-plement skills and competences universities are an important player in this cooperative ecosystem, and The United States is a large hub, with an extensive network of global cooperation. A strong role of its researchers in the publication of scientific articles in cooperation is highlighted. This study contributes to the advancement of the discussion about cooperative networks, as well as to the development of policies aimed at the biotechnology sector advancements

Over the past decade, wireless communication technologies have developed significantly for intelligent applications in road transport. This paper provides an overview of telecommunications-based intelligent transport systems with a focus on ensuring system safety and resilience. In vehicle-to-everything, these problems are extremely acute due to the specifics of the operation of transport networks, which requires the use of special protection mechanisms. In this regard, it was decided to use blockchain as a system platform to support the needs of transport systems for secure information exchange. This paper describes the technological aspects of implementing blockchain technology in vehicle-to-network; the features of such technology are presented, as well as the features of their interaction.

Brazil has ideal conditions for the large-scale use of cabotage cargo transportation: a vast coastline with almost 7,400 km, approximately 70% of the population resident in a coastal range of up to 200 km from the coast and a strong concentration of activities economic along the coast. However, there is an absolute domain of road modal for the transportation of goods, and cabotage is underused. The purpose of the study was to raise the main barriers that negatively impact the performance of Brazilian cabotage. To this end, it was used to bibliographic and documentary research, based on studies already published in journals, doctoral theses, master's dissertations, congress annals, technical reports and research on government-related government agencies sites, navigation companies and entities related to cabotage. The main barriers that contribute to the low use of cabotage in Brazil were identified and analyzed, as well as possible alternatives of solution for sustainable development of this mode of transport. Such a study will certainly serve as subsidies for the definition of public policies aimed at better use of Brazilian cabotage, as well as to encourage navigation companies to invest more in the transport of goods by cabotage, in order to contribute to the reduction of trucks on highways Brazilian and for environmental preservation.

Background and Objectives: ACTION-France (Awareness, Care and Treatment In Obesity MaNagement in France) aims to identify the perceptions, attitudes, behaviors, and potential barriers to effective obesity management in France and guide collaborative actions. Methods: ACTION-France is a cross-sectional survey of people with obesity (PwO) and healthcare professionals (HCPs), in France. The PwO and HCP questionnaires ran from 27/09/2022 to 01/02/2023 and from 19/12/2022 to 31/03/2023, respectively. Results: The study, encompassing 1226 PwO and 166 HCPs, reveals a shared recognition of obesity as a chronic condition. However, despite being requested by most PwO, weight-related discussions are surprisingly infrequent, leading to delayed diagnosis and care. PwO and HCPs held different views as to why: HCPs often attributed it to PwO’s lack of motivation or disinterest, whereas PwO avoided them because they felt weight managing was their own responsibility and were uncomfortable discussing it. When weight was discussed, primarily with general practitioners (GPs), discussions mostly focused on physical activity and dietary. However, results identified a strong psychosocial impact of obesity: 42% of respondents reported anxiety-depressive symptoms, and many more hesitated to engage in certain social activities because of their weight. Psychotherapy was only discussed by 55% of HCPs. Pharmaceutical options were also rarely discussed (19.5% of HCPs), though 56.1% of PwO reported they would want to. Conclusions: HCPs’ and PwO’s perceptions differed significantly and need to converge through enhanced communication. A holistic approach, integrating comprehensive training for GPs and psychological comorbidities, would help to bridge perceptual gaps effectively and foster more empathetic and effective patient care.

The adoption of eHealth has not made great strides in Uganda especially among patients despite its potential in improving patient outcomes through access to care, patient engagement and its ability to reduce unnecessary hospital visits. Previous studies have focused on barriers and facilitators of eHealth in general. None has examined the adoption of eHealth among patients. Therefore, this study set out to investigate the barriers and facilitators of eHealth adoption among patients in Uganda. A cross-sectional survey was conducted in four districts across the country. A total of 292 patients of 18 years and above participated in the study and their selection was through simple random sampling. The bivariate analysis results revealed that education level (χ2 = 14.9, ρ&lt;0.05), gender (χ2 = 4.95, ρ&lt;0.05) and location (χ2 = 85.9, ρ&lt;0.05) have a statistical significant relationship with eHealth adoption. The logistic regression model further revealed that male patients (OR=2.662), those with master’s degree and above (OR=2.2797) and those residing in Kampala (OR=.012) were more likely to use eHealth systems than their counterparts. The success of eHealth requires players in the health sector to ardently focus on the socio-demographic factors of the users, technological and hospital conditions if eHealth adoption is to ensue.

Adventurous play, defined as exciting, thrilling play where children are able to take age-appropriate risks has been associated with a wide range of positive outcomes. Despite this, it remains unclear what factors might aid or hinder schools in offering adventurous play opportu-nities. The purpose of this systematic review is to synthesise findings from qualitative studies on the perceived barriers and facilitators of adventurous play in schools. A total of nine studies were included in the final synthesis. The review used two synthesis strategies: a meta-aggregative syn-thesis and narrative synthesis. Findings were similar across the two syntheses, highlighting that key barriers and facilitators were: adults’ perceptions of children; adults’ attitudes and beliefs about adventurous play and concerns pertaining to health; and, safety and concerns about legis-lation. Based on the findings of the review, recommendations for policy and practice as provided to support adventurous play in schools.

Portugal’s EPAC silo network, initially planned in the 1930s but constructed and utilized primarily in the 1970s, consisted of 31 silos with a total capacity of 841,100 t. The network’s usage declined, however, due to market liberalization and Portugal’s accession to the European Economic Community in 1985. This study focuses on adapting a methodology to inventory and analyse the 31 silos in the EPAC network considering their general features, construction, technological facilities, and socioeconomic aspects. The silos are situated in 30 cities and towns, predominantly in the country’s key grain-growing regions, particularly the Alentejo region. While there are variations in design and construction, most EPAC silos contain two or three rows of circular reinforced-concrete cells and use the spaces between cells for storage. Their capacities range from 6,000 to 35,000 t. Some are inland grain reception and storage silos, while others are larger-capacity port silos designed to unload grain rapidly onto ships using mechanical or pneumatic unloaders. These structures are a significant part of Portugal’s agro-industrial heritage and have in some cases been repurposed as museums or event venues. Compared to other agro-industrial buildings, silos pose unique conversion challenges due to their height and design complexities. Examples of successful reuse in countries like Spain and Italy may provide insights for potential silo projects in Portugal. However, analysis suggests that such proposals and similar initiatives may be viable only in the more highly populated towns.

This comprehensive review digs into the complex landscape of the Metaverse, focusing on user perceptions and the critical roles of usability, social influence, and interoperability. The paper integrates various scholarly insights, underscoring the Metaverse's evolving significance in the digital realm and its implications across diverse sectors. Central to the findings is the importance of usability. The influence of social factors is also prominent, shaping user behavior and decision-making within these virtual spaces. Interoperability becomes a big problem, showing how important it is to have standard protocols and technologies so that experiences on different Metaverse platforms are smooth and seamless. The review further reveals insights into user experience and accessibility, emphasizing the need for inclusive, ergonomic, and user-friendly design to enhance engagement and reduce barriers. Moreover, the paper discusses the ethical and societal implications of the Metaverse, including issues like digital harassment, aggressive marketing, and privacy concerns, which call for responsible development and robust regulatory frameworks. Additionally, the review identifies gaps in current research, particularly in user experience in healthcare applications, the impact of the Metaverse on educational outcomes, and the need for more empirical studies on the long-term effects of Metaverse interactions on user behavior and psychology. This synthesis offers a detailed overview of current user perceptions and challenges within the Metaverse and sets the stage for future research directions, aiming to foster a secure, inclusive, and interoperable Metaverse environment that aligns with ethical standards and societal needs.

This study describes the AMD impacted environments and critically discusses the effects of AMD, current prediction and prevention methods and treatment technologies. The study further, crit-ically analyses the case studies, gaps in AMD research and the challenges and opportunities of-fered by AMD. The study outlined future technological intervention aiming at a paradigm shift towards reducing the volume of sludge generated as well as the operating cost and improving AMD treatment efficiency. The integrated AMD treatment technologies that result in a holistic approach toward sustainable AMD treatment are a current need. As a result, a sustainable AMD treatment strategy has been made possible due to water reuse and rich resource recoveries such sulphuric acid, rare earth elements, and metals. The cost of AMD treatment can be decreased with the use of recovered water and resources, which is essential for developing a sustainable AMD treatment process.

The emergence of Non-Ionizing Radiation (NIR) has stimulated the growth and advancement of technological civilization. NIR is ubiquitous; it has helped improve all fields and even deepened democratic processes through the transfer of data and electronic transmission of results etc. A breathtaking part of NIR is its recent application in the treatment of adverse health effects through radiofrequency ablation, phototherapy, etc. as summarized in Table 1. The benefits of NIR are enormous, however, technological civilization has not come without a cost; some of the adverse health effects associated with NIR include skin cancers, sleep disorders, photo-aging, etc. as summarized in Table 2. Therefore, with the rapid and sporadic increase in the sources of NIR from Natural and Artificial sources including fossil fuel burning, Starlink technology, mobile phones, mobile base antennas, etc., background radiation is expected to rise beyond the exposure limit leading to health illnesses. Intrinsically, there is a dare need to marry concerns that evolve with this growth. Hence, this review article aims to congregate the health hazards associated with NIR and the state-of-the-art applications of NIR in medicine and the health sector in Nigeria being a developing country. Part of our recommendations is that the government at all levels should set up enforcement agencies and policies to drive strict adherence to NIR as provided by ICNIRP; frequent-periodic assessments of background radiation in public places should be carried out due to the increasing sources. In addition, further research is needed to ascertain the health hazard from emerging sources of NIR like Starlink technology and to substantiate findings of non-thermal effects.

The purpose of this study is to investigate the moderating effect of technology configuration capability on the relationship between strategic flexibility and organizational performance through different stages of technological life cycle. Through the empirical research on the 439 Chinese high-tech organizations, it shows that a technological configuration capability has enhanced the effect of strategic flexibility to the organizational performance in the complex dynamic environment. However, the impact on the different stages of technological life cycle is different. In addition, this paper explored strategic flexibility on different stages of technological life cycle on the basis of empirical study.

Sustainable innovation in the agro-food system has become a strategy increasingly used by companies as a means to increase their competitiveness and position themselves in the market. In this context, the objective of this work is to identify the attitudes and sensory perceptions of consumers towards sustainable food technology through two scales (Food Technology Neophobia and Domain Specific Innovativeness) and hedonic tastings. For this, a new product was selected in the market: powder to prepare rice with milk. Most consumers have attitudes toward low neophobia to products with food technology, but there is also some caution, situation that is corroborated by the moderate predisposition towards innovations. Color and flavor attributes can make the difference in positive perceptions. It should not be forgotten that there is a segment of innovative sustainable consumers that represent a key market.

The Predicted Mean Vote (PMV) and the Predicted Percentage of Dissatisfied (PPD) indices are used to assess the indoor environment in terms of human thermal comfort-discomfort. In this study, an experimental combined objective and subjective investigation of thermal comfort perception has been performed in students between 16-18 years old, in a non-air-conditioned school building. The objective approach included instrumentation measurements and data processing according to ISO 7730, whereas, the subjective one was based on answers collection following ISO 10551. The study is mainly devoted to the verification of Fanger’s approach in a building, in free running conditions, under a mild (moderate) climate.The comparison between instrumentation data and questionnaire results presented an underestimation of the mean vote, predicting a cooler sensation than the actual one.

New energy vehicles (NEVs) have been proposed as a promising technology to reduce greenhouse gas (GHG) emissions. China is one of the leading countries in the development of NEVs, and a wide range of companies, including large and smaller businesses, are involved in the Chinese NEV market. Given that the NEV market involves the creation of nascent technologies, there are significant barriers to the development of NEV companies in the business growth stage. This is particularly significant in the case of small and medium-sized enterprises (SMEs). This study surveyed 100 NEV SMEs in China using a structured questionnaire to determine the most significant barriers to the growth of their businesses. Calculating the relative importance index (RII) from the collected questionnaire responses revealed that the most significant barrier at the growth stage is the lack of skilled scientists in China. The most important category of barriers is legal and institutional barriers, which suggests that government intervention in business activities, taxes, and unclear regulations are viewed by entrepreneurs as a serous hindrance to further development in the NEV industry.

Usage of antimicrobials in veterinary practices has always been under scrutiny due to the perceived risk of resulting in antimicrobial-resistant pathogens. This creates the necessity for understanding the role of the prescriber group. Hence, we conducted a cross-sectional survey among veterinary practitioners from August to November 2019 in the Chattogram district of Bangladesh, aiming to assess the practitioner’s perceptions regarding antimicrobial prescribing and antimicrobial resistance (AMR) issue. We collected responses from 100 veterinarians engaged in the treatment of the large animal, poultry, and pet animal through a self-administrated questionnaire. Proportions were calculated for categorical variables and the results are presented using visual aids. Our study revealed two key barriers - scarcity of enough information on antimicrobial used, and the lack of training in the proper prescription of antimicrobials. Participants recognized that prescribing too many varieties of antimicrobials and the use of an incomplete course of drugs as two very important causes for the development of antimicrobial resistance. In addition, prescription of inappropriate doses and incentives from pharmaceutical companies were dubbed as important causes. We also found that along with clinical features and types of organisms, the availability of drugs in the local market and the economic conditions of farmers have potential impacts on the antimicrobials prescribing decision of the veterinarians. However, all participants recognized the emerging threats of AMR. Results suggested that capacity building of veterinarians and the maintenance of strong coordination are crucial in ensuring the proper engagement of veterinarians as the front-line fighters for tackling the AMR issue.

The silos built in the 1930s for Italy’s ammasso (obligatory grain stockpile) stood as powerful symbols of the country’s fascist era. Many of them were destroyed in World War II; only a few remain today, and recent demolitions underscore the urgency of their preservation. This study adapts a methodology developed for inventorying Spanish silos based on their general features, construction, technological facilities, and socioeconomic aspects and applies it to the 30 remaining ammasso silos. These silos are located in grain-producing areas near communication routes and are mostly owned by agricultural consortia. Over half of them are disused and in disrepair. All of them have machinery for receiving, storing, and dispatching grain, and most have equipment for cleaning, sorting, weighing, and packaging if needed. These structures are part of Italy’s agro-industrial heritage and should be protected. Some have been made over into commercial spaces, leisure areas, museums, and even homes. Vertical-cell silos are challenging to convert, unlike horizontally-oriented silos and other open-plan agro-industrial buildings. Examples of silo reuse in other countries, such as Spain and Portugal, can offer useful insights for the ammasso silos. However, socio-economic indicators suggest that such projects are most viable in large population centres.

The exponential growth in the consumption of electronics, in combination with the reduction in their useful life, leads to a significant increase in the volume of electronic material discarded. Printed Circuit Boards (PCBs) are modules composed of ceramic, polymer and metallic materials of high economic value and with a great potential for damage to biotic and anthropic environments when inadequately discarded. The aims of this work was to study the main environmental impacts and the efficiency of mechanical operations in the electronic waste recycling process in optimizing the concentration of metallic copper. For this, the samples obtained were characterized according to their morphology and chemical composition, and subjected to physical and mechanical treatments: dismantling, grinding, separation by granulometry, density and magnetic property. The environment impacts were estimated by the Life Cycle Assessment of the pre-treatment processes, associated with copper extraction operations in WPCBs. According to the results obtained, it is possible to infer that the NM +1mm Concentrated product presents in its metallic composition around 78% of copper, which contributes to the efficiency of the hydrometallurgical extraction processes. It is noteworthy that the Concentrated class represents about 14% of copper (wt) taking into account the amount of 3.789 kg of PCB waste input material. The potential for reinsertion of the dust in the material recovery process is highlighted, given that the chemical composition of this particulate has a significant presence of metals. In general, it was found that due to the higher concentration (wt %) of the sample being allocated in the range of - 0.15mm + 0.05mm, the elements Fe (18.30%), Si (10.73%), Ca (9.21%) and Cu (8.89%) stand out regarding the participation of the elemental composition of this fraction and also regarding the general composition of the sample. Furthermore, the generation of dust during the fragmentation process, can be associated with occupational respiratory diseases when not managed. About the Life Cycle Assessment, in seven of the nine categories evaluated, crushing and screening activities accounted for more than 90% of the recorded impact values. In general, it is estimated that in the pre-treatment phase be generated 15.4 kg CO2 eq.

Ever since the tremendous success of the rapid vaccine development against COVID‑19, its availa-bility, distribution, and deployment have been a significant concern; however, evidence suggests that vaccine hesitancy has become a greater problem. Therefore, trust in vaccines is crucial and critically dependent on regimes' ability to communicate the benefits of immunization. This study investigated ideas on ways to reduce barriers to COVID-19 vaccination uptake. It explores methods to overcome COVID-19 vaccine barriers through qualitative research: interviews and group discussions involving healthcare providers, administration personnel, teachers, and individuals with chronic conditions across urban (Mombasa) and rural (Kilifi) Kenya. Audio-recorded discussions were transcribed and thematically analyzed across locations. Five themes emerged in our results regarding how to reduce barriers to the COVID vaccine in the context of Kenya, including awareness campaigns, engaging diverse stakeholders, using various communication techniques, capacity building to increase vac-cination centers and trained staff, and lastly, revising relevant government health policies and guidelines. These results indicate the importance of adopting multiple approaches, as no single strategy could boost vaccine acceptance. Moreover, this study provides recommendations for con-ceiving actionable interventions to potentially boost vaccine demand and maintain routine immun-ization in Kenya.

A new intervention model for promoting healthy ageing grounded on integrated value-based care was developed and tested in the city of Valencia (Spain). Its implementation raised relevant barriers for older adults in their access to health, health promotion, and health self-management linked with their health and digital literacy. This new intervention model included several aspects. On the one hand, researchers together with older adults and their informal caregivers participating in the study, designed personalised care plans, based on older adults’ specific needs, to be implemented with the support of a digital solution. On the other hand, researchers and health and social professionals implemented a series of six workshops in different locations of the city to encourage the sense of community among participants, reinforcing their trust in the new care model and increasing their adherence. Social activities were at the core of the workshops to understand older people’s interaction with the health and social services provided in the neighbourhood. Qualitative and quantitative methods were combined to extract information from older participants on how to engage them as active actors of their own health and understanding their values and preferences. Qualitative results show that after a post-pandemic situation, they were more concerned about social isolation and desired face-to-face contact with their professional care team; however, feelings of loneliness and/or sadness were not considered amongst the reasons to visit health professionals. Some of the conclusions reveal that the use of technology as a supportive tool is well received but with a stress on its role as “supportive”, and not replacing the close contact with healthcare professionals. Professionals recognised the benefits of this new approach but required more time and incentives to dedicate the effort needed.

The Centers for Disease Control and Prevention recommends everyone between 13-64 years be tested for HIV at least once as a routine procedure. HIV routine screening is reimbursable by Medicare, Medicaid, expanded Medicaid, and most commercial insurance plans. Yet, scaling-up HIV routine screening remains a challenge. We conducted a scoping review for studies on financial benefits and barriers associated with HIV screening in clinical settings in the U.S. to inform an evidence-based strategy to scale-up HIV routine screening. We searched Ovid MEDLINE®, Cochrane, and Scopus for studies published between 2006 - 2020 in English. The search identified 383 Citations; we screened 220 and excluded 163 (outside the time limit, irrelevant, or outside the U.S.). Of the 220 screened articles, we included 35 and disqualified 155 (did not meet the eligibility criteria). We organized eligible articles under two themes: financial benefits/barriers in healthcare settings (9 articles); and Cost-effectiveness in healthcare settings (26 articles). The review concluded recommendations in three areas: (1) Finance: Incentivize healthcare providers/systems for implementing HIV routine screening and/or separate its reimbursement from bundle payments; (2) Personnel: Encourage nurse-initiated HIV screening programs in primary care settings and educate providers on CDC recommendations; and (3) Approach: Use opt-out approach.

Driven by environmental sustainability concerns, the integration of biobased components in curtain wall systems is gaining traction in both research and the construction market. This paper explores the development and validation of a bio-based façade system within the Basajaun H2020 project. The project aimed to demonstrate the feasibility of introducing environmentally friendly bio-based components into the mature curtain wall façade industry. The paper focuses on identifying technological solutions for replacing key components such as profiles, insulation, and the tightness system with bio-based and less environmental impact alternatives presenting the results achieved in the façade system design of the Basajaun project funded by European Union. These solutions aimed at creating a bio-composite-based curtain wall façade that adheres to current building envelope standards and normative; to implement diverse façade typologies for vision panels, opaque sections, and integrated windows; to engineer the prefabrication process for industrialization, enabling wider market replication and simplified transport and installation. The results demonstrate that the Basajaun façade successfully integrates selected components and meets the performance requirements set by regulations. However, questions remain regarding the workability of bio-based profiles as a commercially viable, ready-to-market solution that can replace traditional aluminum profiles in the curtain wall façade industry.

Abstract: Reserve starch, the main component of durum wheat semolina, is constituted by two glucan homopolymers (amylose and amylopectin) that differ in their chemical structure. Amylose is mainly a linear structure formed of α-1,4 linked glucose units, with a lower polymerization degree, whereas amylopectin is a highly branched structure of α-1,4 chains linked by α-1,6 bonds. Variation of the amylose/amylopectin ratio has a profound effect on the starch properties which may impact wheat technological and nutritional characteristics and their possible use in the food and non-food sector. Therefore, some breeding programs were focused on the production of high (HA) and low amylose (LA) genotypes using transgenic and conventional strategies. A great interest was aroused by new genotypes enriched in amylose for their beneficial effects for human health in the prevention of non-communicable diseases. Differently the low-amylose genotypes find applications in different industrial sectors (i.e. frozen and baby foods; starch-based sweeteners and industrial alcohol) for their unique properties. In this work a set of genotypes, with a range of amylose from 14.9 to 57.8%, derived from the durum wheat cv. Svevo was characterized at biochemical and rheological level and used for the production of pasta. A negative correlation was observed between amylose content and semolina swelling power, starch peak viscosity and pasta stickiness. A worsening of the firmness was observed in the low amylose pasta compared to the control (cv. Svevo), whereas no difference was highlighted in the high amylose samples. The resistant starch was higher in the HA pasta compared to the control and LA pasta. Noteworthy, the extent of starch digestion was reduced in the high amylose pasta while the low amylose genotypes offered a higher starch digestion, suggesting other possible applications.

This study focused on the stories of women planters in the implementation of Taranuman Project in the Third District of Albay. Particularly, this explores and documents the experiences, challenges, and successes of women planters involved. By understanding their stories, this undertaking shed light on the motivations and aspirations of women planters, the barriers they have experienced, and their strategies to achieve success. The researchers used descriptive-qualitative research and made use of in-depth interviews and focus group discussions (FGDs). From the collection of the respondents’ narratives, three (3) recurring themes emerged on the motivation and aspirations of women planters in Taranuman Project; Taranuman para sa Pagkasararo (Social cohesion, belonging and unity), Taranuman para sa Pangkabuhayan (Economic empowerment), and Taranuman para sa Karapatang Pampulitika (Political rights, engagement and participation). This study also revealed major challenges in its implementation including infertility of the soil, the distant location of the lands to be cultivated for the project, and the insufficiency in the supply of tools and equipment. However, despite the emerging problems, strategies to counter the difficulties were also formulated. Even so, the researchers strongly recommend that implementers should expand the Taranuman Project in all of the district’s municipalities, enhance women planters' financial and communication skills through training, maintain close partnerships with agencies for project support, encourage beneficiary communication, and develop comprehensive strategies to overcome ongoing challenges and ease beneficiaries’ burdens.

The development of electric aircrafts is becoming an important technology for achieving the goals set by the European Commission for the reduction of gases emissions by 2050 in the aeronautical transportation system. However, there is a gap between the values of specific power in commercial electric machines and the ones required for aeronautical applications. Therefore, the search for alternative materials and non-conventional designs is mandatory. One emergent solution is using superconducting machines and systems to overcome the current limits of conventional electrical machines. This work reviews the new hybrid and all-electric aircraft tendencies, complementing it with recent research on the design and development of high specific power superconducting machines. This includes the main topologies for hybrid and all-electric aircraft, with an overview of the ongoing worldwide projects of these types of aircrafts, systematizing the main characteristics of their propulsion systems. It also includes the research on superconducting machines for the purpose of high specific power, considering the impact on the redesign of aircraft systems in the electrical, cooling, and fuel source sense.

Recently, the world has experienced severe food insecurity problems with most countries having inadequate access to affordable, nutritious and safe foods. Consequently, many food innovations and technologies have been approved to secure sustainable access to food for millions of people. This study investigated the implementation of two technologies to address food insecurity, namely genetically modified foods (GMOs) and the use of antibiotics in crops and animal production. In particular, the study explored how their implementation can be governed responsibly through approved legislation. Therefore, the knowledge, attitudes and practices as well as the governance of antibiotic resistance risks and GMO foods were assessed. In-depth key interviews were conducted for the qualitative survey with triangulation with quantitative data sources. The findings showed that 46% of the population have little knowledge about GMOs with about 79% indicating that food with GM ingredients were being consumed in the country. The main concerns reported on GM foods by most respondents were impact on environment, human health and adverse effects on traditional farming practices with 36% indicating that it intensifies contamination and 32% indicating that it contributes to loss of biodiversity. Notably, 64%) reported that GMOs are a solution to food security and that they are safe. On the use of antimicrobials mainly meant to prevent diseases and access better markets, respondents perceived their use to be associated with antimicrobial resistance a “large level of risk” (score 2 in a scale of 1-3) (M = 1.85, SD = 1.06). Overall, the study found that efforts towards promoting awareness on antibiotic resistance risks and response in human health is relatively limited as reported by 56% of the respondents. Findings show that most of the respondents have only seen minimal or small-scale awareness campaigns. On governance of the two technologies, 71% and 50% of the respondents reported that scientists and elected officials respectively have the greatest role in governance of GMOs with small scale farmers playing a negligible role. Further, it was noted that all the respondents were knowledgeable in AMR and GMO technologies and these findings are crucial to the advancement of food innovations that are geared towards achieving food security in Kenya. This study highlights the risks associated with the poor governance and implementation of technologies and the need for a framework for technological risk governance that is sensitive to local values and socio-economic circumstances that will benefit the achievement.

We investigate the innovational determinants of “Patent Applications” in Europe. We use data from the European Innovation Scoreboard-EIS of the European Commission for 36 countries in the period 2010-2019. We use Panel Data with Fixed Effects, Panel Data with Random Effects, Pooled OLS, WLS and Dynamic Panel. We found that the variables that have a deeper positive association with “Patent Applications” are “Human Resources” and “Intellectual Assets”, while the variables that show a more intense negative relation with Patent Applications are “Employment Share in Manufacturing” and “Total Entrepreneurial Activity”. A cluster analysis with the k-Means algorithm optimized with the Silhouette Coefficient has been realized. The results show the presence of two clusters. A network analysis with the distance of Manhattan has been performed and we find three different complex network structures. Finally, a comparison is made among eight machine learning algorithms for the prediction of the future value of the “Patent Applications”. We found that PNN-Probabilistic Neural Network is the best performing algorithm. Using PNN the results show that the mean future value of “Patent Applications” in the estimated countries is expected to decrease of -0.1%.

Sustainability transition theories analyse a systematic shift towards sustainability at micro (niche), meso (regime) and macro (landscape) level. The assessment of technological systems and structures at the firm level in sustainability transition literature is scant. The present study, taking the technological assessment perspective at the firm level, finds answers to questions like (a) how do established corporations move towards sustainable practices? (b) what role does technological innovation play in the firm’s transition towards sustainability? (c) what technological modes are adopted for sustainability transition? We find answers to these questions through an in-depth case analysis of two multi-national companies in the consumer goods industry. Internally developed and externally acquired technologies by firms in the last 15 years are plotted using qualitative and quantitative indicators on pre-designed templates. Technologies for all three sustainability dimensions, namely, environmental, social and economic, are mapped and the impact assessed. The analysis finds a sustainability transition landscape that shows the use of protected (patents, trademarks, designs) and unprotected technologies (open innovation) to generate impacts like production efficiency, consumption reduction, emission reduction, reduce-recycle-reuse among others. Companies implementing sustainable technologies do observe positive impacts. Implementation of reduce-reuse-recycle (3R)-based technologies enhance the achievement of sustainable development targets. Furthermore, the use of trademarks seems common in differentiating their technologies and identities. These and other results are detailed and used to comment on the role of managing intellectual property and harnessing the effect of technological innovations in sustainability transition.

Enterprises that seek for sustainable development should align economic interests with environmental and social requirements. It is not enough to take into account just these basics components. Technology plays a significant role in company activity. The aim of this article is to highlight the relationship between the dimensions characterising sustainability and to take a deeper look at the structure of the concept of sustainability so that to understand in more detail the completeness of the dimensions of sustainability. For achieving this aim is necessary through the analysis of researchers’ opinions to apply the logical assessment, systematisation, and comparison of information, selects the most important information describing the sustainability of technology, highlights the relationships between the technological aspect of sustainability and other sustainability dimensions, evaluates the technological processes of the corporate product in terms of sustainability, clarifies and presents arguments highlighting the importance of the technological aspect in sustainable business activity, rejects inappropriate arguments, identifies links between the arguments, and, basing on the information, proves and/or formulates anew some logical considerations to justify the full competency of the technological dimension in the sustainable development framework.

Ryegrass is one such cereal that has been underutilized in human nutrition despite its high nutritional and functional value due to the presence of phytochemicals and dietary fibers It is a viable option, especially for countries that do not produce wheat, as it is easily adaptable and overgrows, making it economically viable. This study evaluated the nutritional impact, bioactive compounds, and physicochemical and technological properties of partially substituting maize flour (MF) with sprouted whole ryegrass flour (SR) in developing extrusion-cooked breakfast cereals. A completely randomized design with substitutions ranging from 0 to 20 % of MF with SR was employed as the experimental strategy (P < 0.05). Partial incorporation of SR increased the bioavailability of γ-aminobutyric acid and total soluble phenolic compounds. Using sprouted grains can adversely affect the technological quality of extruded foods, but ryegrass, with its high dietary fiber and low lipid content, mitigates these negative effects. Consequently, breakfast cereals containing 4 and 8 % SR exhibited better physicochemical properties, such as reduced hardness and increased crispness. These results are promising for ryegrass and suggest combining the age-old germination process with extrusion can enhance cereal-based breakfast products' nutritional quality and bioactive compound content.

In this paper, a distinction is first made between environmental, sustainable and green chemistry; the last two are then examined in relation to the more general problem of the environmental education. A brief historical digression on the STS (Science, Technology and Society) movement tries to dissect the reasons why chemistry is seen by the general public as a problem, not as a decisive resource for the realization of the ecological transition. Although sustainable and green chemistry can be decisive in overcoming the insularity of chemical disciplines in the high school, it fails to effectively embed itself in educational practices. Specific operational goals, supporting a real scientifical and technological literacy in sustainable and green chemistry, can help chemical educators. They are provided at the end of an examination of the founding axes of sustainable and green chemistry, according to the criteria of scientific and technological literacy.

Despite global efforts to improve vaccination coverage, the number of zero dose and under immunized children has increased in the African continent, particularly in Nigeria where more than 2.3 million unvaccinated children currently reside, making it the country with highest number of unvaccinated children on the African continent. It is thus imperative to identity barriers and facilitators of immunization in Nigeria with a view to formulate and design targeted interventions that can effectively bridge the immunization gap in Nigeria. In this review, we systematically mapped and summarized existing literature and data on key barriers to vaccine uptake, and facilitators influencing immunization practices in Nigeria. The electronic databases were systematically searched and articles that reported determinants of routine immunization uptake in Nigeria from inception of the databases up till October 2023 were included. The eligible articles were evaluated using a set of pre-defined criteria and the extracted data were analysed and visualized. This scoping review identified barriers spanning logistical, socio-economic, cultural, and healthcare system-related aspects, highlighting the need for a multi-pronged approach to address these challenges. While considerable progress has been made over the years, persistent barriers like distance between area of residence of caregivers and immunization centers, vaccine shortages, poor interpersonal relationship between healthcare workers and caregivers and cultural/religious influences persist. Lastly, collaborative efforts among stakeholders and communities remain paramount in ensuring improved routine immunization coverage across the Nigeria’s diverse socio-cultural landscape.

Robot-assisted rehabilitation has emerged as a promising approach for enhancing motor function in stroke survivors. However, the feasibility and effectiveness of home-based robotic training in this population are underexplored, especially in low/middle-income countries. This feasibility study aimed to address this gap by examining the feasibility and effectiveness of independent home-based training using PLUTO, a robotic device for hand training. A total of 7 chronic stroke survivors were recruited, with 5 completing the study. The results revealed high engagement and adherence to the home-based training program, with participants averaging 1659.8 minutes of training over 24.8 days. The PLUTO system demonstrated excellent usability and elicited positive user perceptions. Significant improvements were observed in functional outcomes, as evidenced by a noteworthy increase in Fugl-Meyer Assessment scores (mean increase of 6.2 points, exceeding the minimal clinically important difference (MCID) of 5.35 points). Furthermore, participants showed improvements in the ABILHAND measure (mean improvement of 1.24 logits, surpassing the MCID of 0.2 logits) and the Barthel Index (mean increase of 8.8 points). These findings demonstrate the feasibility and effectiveness of home-based robotic rehabilitation for chronic stroke survivors. This has implications for expanding access to rehabilitation services in low- and middle-income countries, enhancing patient engagement and adherence, and improving functional outcomes. Larger controlled studies are warranted to evaluate the effectiveness of home-based robotic rehabilitation programs.

Background: Australia’s healthcare system is complex and fragmented which can create challenges in healthcare, particularly in rural and remote areas. Aboriginal people experience inequalities in healthcare treatment and outcomes. This study aimed to investigate barriers and enablers to accessing healthcare services for Aboriginal people living in rural and remote Australia. Methods: Semi-structured interviews were conducted with healthcare delivery staff and stakeholders recruited through snowball sampling. The communities were selected for their high proportion of Aboriginal people and geographical representation (coastal, rural, and border). Thematic analysis identified barriers and enablers. Results: Thirty-one interviews were conducted (n =5 coastal, n=13 remote, and n=13 border) and six themes identified: 1) Improved coordination of healthcare services; 2) Better communication between services and patients; 3) Trust in services and cultural safety; 4) Importance of prioritizing health services by Aboriginal people; 5) Importance of reliable, affordable and sustainable services; 6) Distance and transport availability. These themes were often present as both barriers and enablers to healthcare access for Aboriginal people. They were also present across the healthcare system and within all three communities. Conclusions: This study describes a pathway to better healthcare outcomes for Aboriginal Australians by providing insights into ways to improve access.

Because of an often complicated and difficult-to-access care system, help-seeking for people with suspected dementia can be stressful. Difficulty in help-seeking may contribute to carer burden, in addition to other known stressors in dementia care. This study examined the relationship between perceived help-seeking difficulty and carer burden, and the barriers contributing to perceived difficulty. We interviewed 110 carers accessing a community-based dementia assessment service for suspected dementia of a family member for their perceived difficulty, delays, and barriers in help-seeking, and carers burden in terms of role strain, self-criticism, and negative emotions. Linear regression models showed that perceived help-seeking difficulty is associated with carer self-criticism, while carer role strain and negative emotions are associated with symptom severity of the person with dementia but not help-seeking difficulty. Inadequate knowledge about symptoms, service accessibility, and affordability together explained more than half of the variance in perceived help-seeking difficulty (Nagelkerke R2 = .56). Public awareness about symptoms, support in navigating service, and financial support may reduce perceived difficulty in help-seeking, which in turn may reduce carer self-criticism during the early course of illness.

This proposal describes the design and development of an interoperable application that supports green open access with long-term sustainability and improved user experience of article deposit. Introduction: The lack of library resources and unfriendly repository user interface are two significant barriers that hinder green open access. Tasked to implement the open access mandate, librarians at an American research university developed a comprehensive system called Easy Deposit 2 to automate the support workflow of green open access. Implementation: Easy Deposit 2 is a web application that is able to harvest newly publications, outreach for manuscript on behalf of the library, and facilitate self-archiving to IR. It is developed and maintained by the library and integrated with the IR. Results and Discussion: The article deposit rate is about 25% with Easy Deposit 2, which increases significantly comparing to the previous period. It also serves as a local database for faculty publications with open access status. The lesson learned is that library cannot rely on a single commercial provider for publication data due to mismatched priorities. Conclusion: Recent IT developments provides new opportunities of innovation like Easy Deposit 2 in supporting open access. Academic librarians are vital in promoting "openness" in scholarly communication such as transparency and diversity in the sharing of publication data.

The Model-View-Controller (MVC) architecture, a cornerstone of modern software engineering, offers a robust framework for developing dynamic user interfaces. This paper conducts a broad analysis of MVC’s deployment across various sectors, emphasizing its critical role in technological advancement and market integration. By examining implementation strategies in web development, mobile applications, and enterprise solutions, the study illustrates how MVC enhances application manageability, promotes efficient code reuse, and facilitates parallel development. The paper explores the adoption of MVC principles within major technologies such as Java, .NET, and JavaScript frameworks, underlining its widespread acceptance. Additionally, the analysis covers the preferential use of MVC frameworks within diverse market sectors including technology enterprises, educational institutions, e-commerce, and financial services, which leverage MVC for superior data management and user experience. Emerging trends such as the shift towards the Model-View-ViewModel (MVVM) architecture and the integration of MVC with artificial intelligence and machine learning technologies are also discussed. This comprehensive review not only reaffirms MVC’s enduring relevance but also its adaptive evolution in response to emerging technological demands and market needs.

Tourism is increasingly becoming one of the most important components of the economy. Coastal tourism is of particular importance in our country, this is because Albania has a very favorable geographical position. The tourist destination chosen for study in this paper is Durrës. It is analyzed as a complex dynamic system that evolves with a series of techniques and methods drawn from the area of network theory. The main objective of this paper is the comparison of technological and socio-economic networks, through different methods and techniques. The methodology of this research includes different data collection methods for both networks and their analysis. 504 nodes were taken into consideration. A significant part of the research is based on network theory, using algorithms and network analysis techniques to reveal their static and dynamic characteristics. Through this paper we show that the internet network and the socio-economic network of Durrës are similar in some aspects and have a great impact on the development of the tourist destination. The analysis of these two networks provides a deeper picture of the relations between the actors of the destination and helps to improve the tourism strategies and the economic development of the area. Thus, the research is an attempt to better understand the impact of technological and socio-economic networks in the development of the tourist destination of Durrës and uses different ways of network analysis to discover the similarities and differences between them.