Quantum Correlations are studied extensively in quantum information domain. Entanglement Measures and Quantum Discord are good examples of these actively studied correlations. Detection of violation in Bell inequalities is also a widely active area in quantum information theory world. In this work, we revisit the problem of analyzing the behavior of quantum correlations and violation of Bell inequalities in noisy channels. We extend the problem defined in a recent study by observing the changes in negativity measure, quantum discord and a modified version of Horodecki measure for violation of Bell inequalities under amplitude damping, phase damping and depolarizing channels. We report different interesting results for each of these correlations and measures. All these correlations and measures decrease under decoherence channels, but some changes are very dramatical comparing to others. We investigate also separability conditions of example studied states.

The violation of Bell's theorem is a very simple way to see that there is no underlying classical interpretation of quantum mechanics. The measurements made on the photons shows that light signal (information) could travel between them, hence completely eliminating any chance that the result was due to anything other than entanglement. Entanglement has been studied extensively for understanding the mysteries of non-classical correlations between quantum systems. It was found that violation of Bell's inequalities could be trivially calculated and for sets of nonmaximally entangled states of two qubits, comparing these entanglement measures may lead to different entanglement orderings of the states. On the other hand, although it is not an entanglement measure and not monotonic under local operations, due to its ability of detecting multipartite entanglement, quantum Fisher information (QFI) has recently received an intense attraction generally with entanglement in the focus. In this work, we visit violation of Bell's inequalities problem with a different approach. Generating a thousand random quantum states and performing an optimization based on local general rotations of each qubit, we calculate the maximal QFI for each state. We analyze the maximized QFI in comparison with violation in Bell's inequalities and we make similar comparison of this violation with commonly studied entanglement measures, negativity and relative entropy of entanglement. We show that there are interesting orderings for system states.

Quantum Correlations are studied extensively in quantum information domain. Entanglement Measures and Quantum Discord are good examples of these actively studied correlations. Detection of violation in Bell inequalities is also a widely active area in quantum information theory world. In this work, we revisit the problem of analyzing the behavior of quantum correlations and violation of Bell inequalities in noisy channels. We extend the problem defined in [1] by observing the changes in negativity measure, quantum discord and a modified version of Horodecki measure for violation of Bell inequalities under amplitude damping, phase damping and depolarizing channels. We report different interesting results for each of these correlations and measures. All these correlations and measures decrease under decoherence channels, but some changes are very dramatical comparing to others. We investigate also separability conditions of example studied states.

In the paper, the author (1) presents an explicit formula and its inversion formula for higher order derivatives of generating functions of the Bell polynomials, with the help of the Faà di Bruno formula, properties of the Bell polynomials of the second kind, and the inversion theorem for the Stirling numbers of the first and second kinds; (2) recovers an explicit formula and its inversion formula for the Bell polynomials in terms of the Stirling numbers of the first and second kinds, with the aid of the above explicit formula and its inversion formula for higher order derivatives of generating functions of the Bell polynomials; (3) constructs some determinantal and product inequalities and deduces the logarithmic convexity of the Bell polynomials, with the assistance of the complete monotonicity of generating functions of the Bell polynomials. These inequalities are main results of the paper.

We show that loophole-free Bell-type no-go theorems cannot be derived in theories involving local hidden fields. At the time of measurement, a contextuality loophole appears because each particle’s electromagnetic field interacts with the field of its respective apparatus, preventing the expression of the probability density as a function independent of the orientation of the measuring devices. Then, we use the dynamical evolution of the probability distribution to show that the spin-correlation integral can neither be expressed in terms of initial Cauchy data restricted to the particles. A correlation loophole ensues, which prevents the usage of the non-contextual correlation integrals required to demonstrate the CHSH-Bell inequality. We obtain a new inequality not violated by quantum correlation functions of entangled spin pairs, and propose that Maxwell’s electrodynamic field is the missing hidden variable triggering the coupled nonlinear oscillations of the particles, which bring about the synchronicities observed in the Einstein-Podolsky-Rosen-Bohm (EPRB) experiment.

In this study, based on a new quantum integral identity, the authors establish some quantum estimates of Hermite-Hadamard type inequalities for convex functions. These results generalize and improve some known results given in literatures.

In this paper, we establish the generalized Qi-type inequality involving conformable fractional integrals. The results presented here would provide extensions of those given in earlier works.

In this paper, two double Jordan-type inequalities are introduced based on the papers [1]-[5]. These inequalities generalize the inequalities obtained in [1]-[5]. As a result, some new upper and lower bounds of the sinc function are obtained. This extension of Jordan’s inequality is enabled by considering the corresponding inequalities through the concept of stratified families of functions elaborated in [6]. Based on this approach, some optimal approximations of the sinc function are derived by determining corresponding minimax approximants, also described in the paper [6].

In this paper, we have established Hermite-Hadamard inequalities for r-preinvex functions via fractional integrals.

In this paper, we consider a class of bilevel programming problems (abbreviated as, BLPP). Exploiting the generalized approximate convexity assumptions, we investigate the relations among the solutions of approximate Minty (respectively, Stampacchia) type variational inequalities (abbreviated as, AMTVI (respectively, ASTVI)), and the local ϵ-quasi solutions of the BLPP. Moreover, by employing the generalized Knaster–Kuratowski–Mazurkiewicz (abbreviated as, KKM)-Fan’s lemma, we derive some existence results for the solutions of approximate variational inequalities (abbreviated as, AVI), namely, AMTVI and ASTVI. A non-trivial example is given to highlight the importance of the established results. To the best of our knowledge, there is no research paper available in the literature that establishes relationships between the AVI and the BLPP under the assumptions of generalized approximate convexity in terms of limiting subdifferentials.

The unified Mittag-Leffler (ML) function is important factor in formulation of compact form of fractional integrals. In this paper estimations of integral operators, with the unified ML function as kernel are given. The Hadamard inequality in the form of fractional integrals is proved by considering refinement of convexities. These estimations provide various inequalities as refinements of recently published results.

This paper presents an advanced software tool for precise laser beam propagation analysis, focusing on the calculation of the M2 value, a key measure of beam quality. Developed in Python, the software integrates libraries like NumPy, Matplotlib, and SciPy for robust data handling and accurate polynomial fitting. It features a user-friendly interface for easy data input, analysis, and visualization, making it accessible to both professionals and novices. The tool has been rigorously validated against theoretical models (M2=1) and experimental data (showing M2=1.2548 and 1.3166), ensuring high accuracy and reliability. It visualizes beam width data and fitted polynomial curves, aiding in assessing beam propagation characteristics and optimizing laser systems. Future enhancements include additional beam quality metrics, machine learning integration, and cloud-based functionality. This tool significantly advances laser beam analysis, benefiting research and industrial applications by improving performance and efficiency. The software is available at DOI: 10.5281/zenodo.13325911

The integration of magnetic observatories of many countries into the Intermagnet network has provided researchers with new opportunities to investigate many geophysical processes. The joint processing of measurement evidence from magnetic observatories located in various geolocations makes it possible to better understand the dynamics of the interaction of solar plasma fluxes with the Earth's magnetosphere. For the correct interpretation of the dynamics of physical processes, the accuracy of the time reference of measurement results is of great importance. The measurement results of local observatories were transformed to a unified ecliptic coordinate system oriented towards the Sun in order to extract small variations in the magnetic field occurring before the magnetic storm commencement. Before transforming the coordinates, a constant component equal to the average daily value of the magnetic field components was removed from the results of minute-by-minute measurements. Owing to the averaging evidence from 84 magnetic observatories of the Intermagnet network, variations in the magnetic field of cosmic origin, preceding the magnetic storm commencement were detected. The correlation analysis of these variations recorded by different observatories revealed the presence of time shifts between the data series of different observatories. Only 62% of the observatories had a relative data shift within the range of ± 1 minute. Before the joint data processing in order to efficient use of data recorded with a time shift a method for correcting time shifts has proposed.

In this paper, we investigate a class of hierarchical variational inequalities (HVIPs, i.e., strongly monotone variational inequality problems defined on the solution set of multiple-set split common fixed point problems) with quasi-pseudocontractive mappings in real Hilbert spaces, which special cases can be found in many important engineering practical applications such as image recognizing, signal processing and machine learning. In order to solve HVIPs of potential application value, inspired by the primal-dual algorithm, we propose a novel accelerated cyclic iterative algorithm that combines the inertial method with a correction term and a self-adaptive step-size technique. Our approach eliminates the need for prior knowledge of the bounded linear operator norm. Under appropriate assumptions, we establish strong convergence of the algorithm. Finally, we apply our novel iterative approximation to solve multiple-set split feasibility problems and verify the effectiveness of the proposed iterative algorithm through numerical results.

When profit-driven renewal is difficult to implement, many historic districts are “frozen protected” in China. In the social context of “building cities for the people” in recent years, the public value-oriented renewal of urban historic areas plays an important role in the transformation of cities. This study investigates the strategies of historic district regeneration in China by integrating spatial form, urban governance, and public value. We propose a novel framework to analyze the regeneration of historic districts, using Taiyuan Bell Tower Street as a case study. The framework distinguishes between two dimensions: spatial and economic-social. In the spatial dimension, we focus on the transformation of spatial form to regenerate public value, emphasizing the attribute of "publicness" as central to urban regeneration efforts. This involves a tiered approach of excavating and upgrading historic districts at macro, meso, and micro levels. In the economic-social dimension, we explore urban governance to strengthen public value, involving government, market, and societal actors in a collaborative renewal process. The analysis highlights that a public value-oriented approach to heritage regeneration offers greater sustainability and could serve as a model for other cities seeking similar outcomes.

We start with the discussion on misapplication of classical probability theory by Feynman in his analysis of the two slit experiment (by following the critical argumentation of Koopman, Ballentine, and the author of this paper). The seed of Feynman's conclusion on the impossibility to apply the classical probabilistic description for the two slit experiment is treatment of conditional probabilities corresponding to different experimental contexts as unconditional ones. Then we move to the Bell type inequalities. Bell applied classical probability theory in the same manner as Feynman and, as can be expected, he also obtained the impossibility statement. In contrast to Feynman, he formulated his no-go statement not in the probabilistic terms, but by appealing to nonlocality. This note can be considered as a part of the author's attempts for getting rid off nonlocality from quantum physics.

This study examines change detection techniques in dense point clouds for the purpose of Cultural Heritage preservation, with a particular focus on the San Pietro Barisano Bell Tower in Matera, Italy. Dense point clouds, obtained via advanced laser scanning, offer detailed 3D representations of heritage structures, facilitating the precise monitoring changes over time. The investigation uses a variety of change detection algorithms, including the Iterative Closest Point (ICP) algorithm, which is renowned for its robust registration capabilities in aligning point clouds with high accuracy. The combination of ICP with deviation analysis and feature-based methods allows for the effective identification of alterations, including deformations, material loss, and surface degradation. This methodology establishes a comprehensive framework for the monitoring of Cultural Heritage, thereby enabling timely and targeted preservation efforts. The results emphasise the substantial contribution of dense point cloud analysis to the enhancement of heritage management and the safeguarding of vulnerable architectural sites.

Although mammography has been the gold standard for early detection of breast cancer, if a woman has dense breast tissue, a false negative diagnosis may occur. Breast ultrasound, whether hand-held or automated, is a useful adjunct to mammography but adds extra time and cost. The primary aim was to demonstrate that our second-generation Aceso system, which combines full-field digital mammography (FFDM) and automated breast ultrasound (ABUS) in a single platform, is able to produce improved quality images that provide clinically meaningful results. Aceso was first tested using two industry standards: a CDMAM phantom to assess the FFDM images; and the CIRS 054GS phantom to evaluate the ABUS images. In addition, 25 women participated in a clinical trial: 14 were healthy volunteers while 11 were patients referred by the breast clinic at Groote Schuur Hospital. The CDMAM phantom results showed the FFDM results were better than EUREF’s standard of “acceptable” and were approaching “achievable”. The ABUS results showed lateral and axial spatial resolution of 0.5 mm and adequate depth penetration of 80 mm. Our second-generation Aceso system, with its improved quality of clinical FFDM and ABUS images, has demonstrated its potential for early detection of breast cancer in a busy clinic.

In a recent paper, Sarikaya et al. introduced a new analogue of the classical Gamma function which they called, the conformable Gamma function. Motivated by their results, this paper seeks to establish some inequalities for the conformable Gamma and Polygamma functions. Among other analytical tools, the procedure relies on the generalized forms of some classical inequalities.

There is a growing demand for indoor positioning systems (IPS) in a wide range of applications. However, traditional solutions such as GPS face many technical challenges. In recent years, a promising alternative has been emerging: IPS based on visible light communication (VLC), which offers a combination of which is highly accurate, low cost and energy efficient. This article presents a comprehensive review of VLC-based IPS, providing a tutorial-like overview of the system. It begins by comparing various positioning systems and providing background information on their inherent limitations. The mechanisms of VLC-based IPS are then discussed, including a comprehensive examination of their performance metrics and underlying assumptions. The complexity and efficiency of VLC-based IPS is examined by analyzing factors such as channel modeling, signal processing, and localization algorithms. To optimize the system, a variety of strategies are explored. These include the design of efficient modulation schemes, the development of advanced encoding and decoding algorithms, the implementation of adaptive power control, and the use of state-of-the-art localization algorithms. Additionally, system parameters such as LED placement, receiver sensitivity, and transmit power are carefully examined to highlight their impact on energy efficiency and localization accuracy. Altogether, this paper serves as a comprehensive guide to VLC IPS, providing in-depth insights into its vast potential and the challenges it presents.

The emergence of Artificial Intelligence (AI) driven Keyword Spotting (KWS) technologies has revolutionized human to machine interaction. Yet, the challenge of end-to-end energy efficiency, memory footprint and system complexity of current Neural Network (NN) powered AI-KWS pipelines has remained ever present. This paper evaluates KWS utilizing a learning automata powered machine learning algorithm called the Tsetlin Machine (TM). Through significant reduction in parameter requirements and choosing logic over arithmetic based processing, the TM offers new opportunities for low-power KWS while maintaining high learning efficacy. In this paper we explore a TM based keyword spotting (KWS) pipeline to demonstrate low complexity with faster rate of convergence compared to NNs. Further, we investigate the scalability with increasing keywords and explore the potential for enabling low-power on-chip KWS.

The aim of this study was to quantify methane (CH4) emissions from dairy cows during milking by maximum amplitude of eructation peaks and compare estimates with other metrics for CH4 emissions. Spot measurements of CH4 and carbon dioxide (CO2) emissions were recorded for at least 7 days of continuous sampling using an infrared gas analyser in a robotic milking station whilst cows were milked. Concentrations of CH4 and CO2 were measured at 1 second intervals. A total of 105,701 CH4 spot measurements were obtained from 2,206 dairy cows on 18 farms. Methane emissions per individual cow were quantified by maximum amplitude of eructation peaks, average area under eructation peaks (integral of eructation), average concentration during milking and ratio of CH4 to CO2 concentration. There was a high correlation (r = 0.71) between CH4 emissions quantified by maximum amplitude and integral of eructation peaks. The correlation between maximum amplitude and average CH4 concentration was low, and there was no correlation between maximum amplitude and ratio of CH4 to CO2. As both approaches identify and extract eructation peaks to quantify enteric CH4 emissions, the substantial association between maximum amplitude and eructation integral was expected.

If a clear and valid no-go for Einsteinian hidden parameters is real, it must in no way be possible to violate the CHSH with a local hidden variables based computer simulation. In the paper we show that with the use of a modied Glauber-Sudarshan method it is possible to violate the CHSH.The criterion value comes close to the quantum value and is approximately 2.4. The proof (POC) is presented with the use of an R computer program. The important snippets of the code are discussed and the complete code is presented in an appendix.

In this paper, some convexity properties and some inequalities for the (p,k)-analogue of the Gamma function, Г_p,k(x) are given. In particular, a (p,k)-analogue of the celebrated Bohr-Mollerup theorem is given. Furthermore, a (p,k)-analogue of the Riemann zeta function, ζ_p,k(x) is introduced and some associated inequalities are derived. The established results provide the (p,k)-generalizations of some known results concerning the classical Gamma function.

In this paper, we firstly consider extended degenerate central factorial numbers of the second kind and provide some properties of them. We then introduce unified degenerate central Bell polynomials and numbers and investigate many relations and formulas including summation formula, explicit formula and derivative property. Moreover, we derive several correlations for the fully degenerate central Bell polynomials associated with the degenerate Bernstein polynomials and the degenerate Bernoulli, Euler and Genocchi numbers.

In the paper, the authors present unified generalizations for the Bell numbers and polynomials, establish explicit formulas and inversion formulas for these generalizations in terms of the Stirling numbers of the first and second kinds with the help of the Faà di Bruno formula, properties of the Bell polynomials of the second kind, and the inversion theorem connected with the Stirling numbers of the first and second kinds, construct determinantal and product inequalities for these generalizations with aid of properties of the completely monotonic functions, and derive the logarithmic convexity for the sequence of these generalizations.

We describe results from a Monte-Carlo simulation of Bell-CHSH type correlations in hydrodynamic walkers. We study feasibility of a real life walker test with relevant hydrodynamic parametric ranges. We observe the generic formation of pairs of walkers strongly anti-correlated both in position and momentum. With this source of entangled walkers, we model the insertion of 2 pins in the bath as a notion of measure, akin to the polarizers of photonic Bell tests. This insertion of pins, either static or dynamic, introduces 2 weak field signals. Each field has the physical form of a standing wave Bessel hat, representing the non-local (field mediated) influences of the measure on the walkers. With this representation of the measure, we develop protocol for a Bell game with actual hydrodynamic walkers. We model both static and dynamic insertion of pins in the walker bath. Static pins give us numerical S > 2, as a permissible Bell violation for a non-local (field based) effect. Dynamic insertion of the pins, however, leads to causal space separation of the two arms. We observe the again expected S ≤ 2. We argue for the hydrodynamic implementation and observation of these effects as a walker visualization of Bell inequalities.

The primary purpose of this article is to study the asymptotic and numerical estimates in detail for higher degree polynomials in $\pi(x)$ having a general expression of the form, \begin{align*} P(\pi(x)) - \frac{e x}{\log x} Q(\pi(x/e)) + R(x) \end{align*} $P$, $Q$ and $R$ are arbitrarily chosen polynomials and $\pi(x)$ denotes the \textit{Prime Counting Function}. The proofs require specific order estimates involving $\pi(x)$ and the \textit{Second Chebyshev Function} $\psi(x)$, as well as the famous \textit{Prime Number Theorem} in addition to certain meromorphic properties of the \textit{Riemann Zeta Function} $\zeta(s)$ and results regarding its non-trivial zeros. A few generalizations of these concepts have also been discussed in detail towards the later stages of the paper, along with citing some important applications.

The microtubule-associated protein TAU is sorted into the axon in healthy brain neurons. Somatodendritic missorting of TAU is a pathological hallmark of many neurodegenerative diseases called tauopathies, including Alzheimer’s Disease (AD). Cause, consequence, and (patho)physiological mechanisms of TAU sorting and missorting are understudied, in part also due to the lack of readily available human neuronal model systems. The human neuroblastoma cell line SH-SY5Y is widely used for studying TAU physiology and TAU-related pathology in AD and related tauopathies. SH-SY5Y cells can be differentiated into neuron-like cells (SH-SY5Y-derived neurons) using various substances. This review evaluates whether SH-SY5Y-derived neurons are a suitable model for i) investigating intracellular TAU sorting in general, and ii) with respect to neuron subtype-specific TAU vulnerability. I) SH-SY5Y-derived neurons show pronounced axodendritic polarity, high levels of axonally localized TAU protein, expression of all six major human brain isoforms, and TAU phosphorylation similar to the human brain. As proliferative cells, SH-SY5Y cells are readily accessible for genetic engineering, stable transgene integration and leading-edge genome editing are valuable and promising tools for TAU-related studies. II) Depending on the used differentiation procedure, SH-SY5Y-derived neurons resemble cells of distinct subcortical nuclei, i.e. the Locus coeruleus (LC), Nucleus basalis (NB) and Substantia nigra (SN), all of which early affected in many tauopathies. This allows to analyse neuron-specific TAU isoform expression and intracellular localization, also in the context of vulnerability to TAU pathology. Limitations are e.g. the lack of mimicking age-related tauopathy risk factors and the difficulty to define the exact neuronal subtype of SH-SY5Y-derived neurons. In brief, this review discusses the suitability of SH-SY5Y-derived neurons for investigating TAU (mis)sorting mechanisms and neuron-specific TAU vulnerability in disease paradigms.

In Thailand, parking time violation is a major problem, especially for mini-marts. At present the task of detecting parking time violation is mainly conducted manually using Closed-Circuit Television (CCTV). This method requires additional human labour to track incoming and outgoing vehicles. Therefore, low cost time violation tracking is needed. To the best of our knowledge, there has not been any research for parking violation detection and tracking conducted for parking time limits. This paper introduces a novel parking time violation detection algorithm using the Yolov8 and DeepSORT tracking algorithms to track vehicles in consecutive frames. The presented parking violation tracking algorithm can provide a guideline for research in parking time violation detection.

In recent decades, a number of high-profile cases involving fraud as research misconduct have been in the media and resulted in severe consequences for those convicted. According to the increased cases of allegations and coverage in the media, this reflects a heightened awareness that fraudulent actions exist. Nonetheless, the Office of Research Integrity data suggests that despite the growth in the number of the cases of allegation there has not been a commensurate increase in findings of misconduct. The purpose of this paper is to explore misconduct to better understand what it entails. An analysis of misconduct from the perspective of the definitions of allegations and fraud of is conducted and potential frameworks for understanding both are considered. The paper considers serial-positioning effects of primacy and recency on allegation phenomena, as well as supervenience theory and contextualism as a lens for understanding fraud. Discussion of the relational semantics of the core aspects of fraud and de facto grouping of forms of misconduct. It is concluded that the interrogative pronouns of “what” and “when” could be used to categorize forms of misconduct laying the foundation for the next paper that deconstructs the definition of falsification according to the Public Health Service.

Sequential properties can violate Bell-type inequalities without direct influence on each other, but only if detected in pairs. This is demonstrated below with theoretical arguments, and with a straightforward toy model. Rotating arrows can have transient qualities that produce maximal Bell violations with predetermined values. Any non-signaling phenomenon (classical, or non-classical) can also be interpreted as local.

The integration of solar energy systems with agricultural practices, known as agrivoltaic systems, presents a promising solution for advancing sustainable food and energy production. This approach involves installing photovoltaic panels on agricultural lands, which allows for simultaneous crop cultivation and energy generation. Agrivoltaic systems offer a dual benefit: they enhance land use efficiency by utilizing the same area for both solar power generation and crop production, and they contribute to sustainable energy transitions. This abstract explores the benefits and challenges associated with agrivoltaic systems. Key advantages include increased land productivity, reduction in water usage due to shading effects, and potential economic gains from dual income streams. Furthermore, these systems can mitigate land use conflicts by combining food production with renewable energy generation. However, there are challenges to address, including the potential for decreased crop yields under solar panels, the need for appropriate system design to balance energy generation and agricultural needs, and the economic feasibility of initial investment and maintenance. The integration of agrivoltaic systems represents a critical step toward achieving sustainable development goals by promoting environmental stewardship and resource efficiency. Future research and advancements in technology are essential to optimize system performance and maximize benefits for both agriculture and energy sectors.

It is becoming clear that in addition to gap junctions, playing a role in cell-cell communication, gap junction proteins, connexins, located in cytoplasmic-compartments may have other important functions. Mitochondrial connexin 43 (Cx43) is increased after ischemic preconditioning and has been suggested to play a protective role in the heart. How Cx43 traffics to the mitochondria and the interactions of mitochondria with other Cx43-containing structures are unknown. In this study, immunocytochemical, super-resolution and transmission electron microscopy were used to detect cytoplasmic Cx43-containing structure and to demonstrate their interactions with other cytoplasmic organelles. The most prominent cytoplasmic Cx43-containing structures, annular gap junctions, were demonstrated to form intimate associations with lysosomes as well as with mitochondria. Surprisingly, the frequency of associations between mitochondria and annular gap junctions was greater than that between lysosomes and annular gap junctions. The benefits of annular gap junction/mitochondrial associations are not known. However, it is tempting to suggest that the contact between annular gap junction vesicles and mitochondria facilitates Cx43 deliver to the mitochondria. Furthermore, it points to the need for investigating trafficking of Cx43 to cytoplasmic compartments and annular gap junction as more than only a vesicle destined for degradation.

This paper is devoted to the foundational problems of dendrogramic holographic theory (DH-theory). We use the ontic-epistemic (implicate-explicate order) methodology. The epistemic counterpart is based on representation of data by dendrograms constructed with hierarchic clustering algorithms. The ontic Universe is described as the p-adic tree; it is zero dimensional, totally disconnected, disordered, and bounded (in p-adic ultrametric). Interrelation classical-quantum loses its sharpness; generally simple dendrograms are ``more quantum’’ than complex one. We use the CHSH-inequality as a measure of quantum(-likeness). We demonstrate that it can be violated by classical experimental data represented by dendrograms. The seed of this violation is neither nonlocality nor rejection of realism. This is nonergodicity of dendrogramic time series. Generally, violation of ergodicity is one of the basic features of DH-theory. We also consider DH-theory for Minkovski geometry and monitor the dependence of CHSH-violation and nonergodicity on geometry as well as a Lorentz transformation of data.

From the existing millions of fungal species only a few cause disease. In this study, we investigated invasive fungal infections in the head and neck over a 19-year period (2005 to 2024) at a large academic healthcare system. Among 413 cases, 336 were noninvasive, and 77 were invasive. The highest incidence of invasive infections occurred in the sinonasal cavities, with a 15-fold difference compared to other sites. Most infections affected adults over 40 years old. The most common organisms were Mucorales (51%), hyaline molds (29%), and Candida (11%). Risk factors included malignancy, transplant, diabetes, and illicit drug use. Mortality was high in patients with malignancy and/or transplant. Infections affecting the mandible were usually a complication of osteoradionecrosis and were associated with coinfection of Candida and Actinomyces. At other sites, infections were rare and were usually the result of penetrating injuries or immunosuppression. Treatment typically involved a combination of antifungals and surgical procedures.

The convergence of digital twin technology with additive manufacturing (AM) represents a transformative advancement in the fields of design, simulation, and production. Digital twins—virtual replicas of physical assets—enable real-time monitoring, simulation, and optimization of manufacturing processes by mirroring their physical counterparts. When integrated with additive manufacturing, which allows for the creation of complex geometries and rapid prototyping, digital twins enhance the ability to design, test, and refine products with unprecedented precision and efficiency. This integration facilitates iterative design improvements, predictive maintenance, and real-time process adjustments, leading to more accurate simulations and optimized production workflows. By leveraging data from digital twins, manufacturers can anticipate issues, reduce material waste, and shorten development cycles. This abstract explores how the fusion of digital twin technology with AM not only refines traditional manufacturing paradigms but also paves the way for more innovative and adaptive manufacturing practices.

4D printing represents an innovative evolution of 3D printing technologies, incorporating time as a fourth dimension to create objects that can transform and adapt over time in response to environmental stimuli. This emerging field has shown significant advancements in materials science, design principles, and applications. Recent research focuses on developing responsive materials such as shape-memory polymers, hydrogels, and composites that can undergo controlled transformations in reaction to changes in temperature, humidity, or other external factors. The advancements in 4D printing have led to a wide array of applications, including self-healing structures, adaptive medical devices, and dynamic architectural components. This abstract examines the latest progress in 4D printing technologies, highlighting key advancements in material development and design strategies. It explores various case studies that demonstrate the practical implementation of 4D-printed objects across different sectors. Furthermore, the abstract discusses the challenges faced by researchers, including material limitations, scalability issues, and the need for standardized testing methods. The potential future directions of 4D printing are also considered, emphasizing the need for interdisciplinary collaboration to overcome current limitations and expand the range of applications. This research underscores the transformative potential of 4D printing in creating intelligent and adaptable systems, offering significant benefits across industries from healthcare to construction.

We consider spontaneous quark transitions between the Λ0 baryon and its resonant states, and (anti)quark transitions between the neutral kaon K0 and the two heavy ηq-mesons (q = c, b). We use the measured differences in mass deficits to calculate the binding energy levels of valence c and b (anti)quarks in these transitions. In the process, we account for isospin energy release in K0 transitions and for the work done by the strong force in suppressing Coulomb repulsions in the charged Λc+-baryon. We find that the flips s→c and s¯→c¯ both release energy back to the strong field; and that the overall range of quark energy levels above their u-ground is 100-MeV wider than that of antiquark energy levels above their d¯-ground. The wider quark range stems from the flip s→b, which costs 283 MeV more (or 3× more) than the corresponding antiquark flip s¯→b¯. At the same time, transitions from the respective ground states to the s and s¯ states (or the c and c¯ states) point to a clear origin of the elusive charge-parity (CP) violation. The determined binding energy levels of (anti)quarks allow us to analyze in depth the (anti)quark transitions in Λ-baryons and B-mesons.

Nutraceuticals comprise dietary supplements, functional foods, medicinal foods, and pharmaceuticals. However, to date all these concepts are interpreted in different ways with the rapid increasing knowledge on nutrition, medicine, and plant biotechnology changing the concepts about food, health and agriculture. What matters are the bioactive elements conveyed by foodstuffs as nutrients or non-nutrients, which interfere with human metabolism and have impact on health, aging and well-being. Food, not nutrients, is the fundamental unit in nutrition and edible mushrooms, are fungi that supply unique biological compounds, different from plant or animal origin, which significantly impact on health status. Their influence on medicinal interventions has been known and studied for many years. The role on neurodegenerative disorders has been recently investigated and their significance on many other diseases has been well demonstrated. On this note it is synthesized the more recent knowledge of some edible mushrooms and preparations on Ménière’s disease, a lifelong condition it can develop at any age, but most commonly appearing between 40 and 60 years of age.

The COVID-19 pandemic has had devastating consequences for health, social, and economic domains, but what has received far less focus is the effect on people’s relationship to vital ecological supports, including access to greenspace. We assessed patterns of greenspace use in relation to individual and environmental factors and their relationship with experiencing psychological symptoms under the pandemic. We conducted an online survey recruiting participants from social media for adults in Korea for September–December 2020. The survey collected data on demographics, patterns of using greenspace during the pandemic, and major depression (MD) and generalized anxiety disorder (GAD) symptoms. The Patient Health Questionnaire (PHQ-9) and the Generalized Anxiety Disorder 2-item (GAD-2) were applied to identify probable cases of MD and GAD. A logistic regression model assessed the association decreased visits to greenspace after the outbreak compared to 2019 and probable MD and GAD. Among the 322 survey participants, prevalence of probable MD and GAD were 19.3% and 14.9%, respectively. High rates of probable MD (23.3%) and GAD (19.4%) were found among persons currently having job-related and financial issues. Of the total participants, 64.9% reported decreased visits to greenspace after the COVID-19 outbreak. Persons with decreased visits to greenspace had 2.06 higher odds (95% CI: 0.91, 4.67) of probable MD at the time of the survey than persons whose visits to greenspace increased or did not change. Findings suggest that barriers to greenspace use could deprive people of mental health benefits and affect mental health during pandemic; an alternative explanation is that those experiencing poor mental health may be less likely to visit greenspaces during pandemic. This implies the need of adequate interventions on greenspace uses under an outbreak especially focusing on how low-income populations may be more adversely affected by a pandemic and its policy responses.

In this review, we present the latest exclusion limits obtained with astroparticles for Lorentz Invariance Violation (LIV) in the photon sector. We discuss the techniques known as energy-dependent time delay or time lag, subluminal pair production threshold shift, superluminal photon decays and superluminal photon splitting. Perspectives for future results in LIV with the next generation of experiments are also addressed.

Access to urban green and blue spaces (UGBS) has been associated with positive effects on health and wellbeing; however, the past decades have seen a decline in quality and user satisfaction with UGBS. This reflects the mounting challenges that many UK cities face in providing appropriate public facilities alongside issues such as health inequalities, an ageing population, climate change, and loss of biodiversity. At present, little is known about the preferences of different population subgroups and, specifically, the UGBS they visit and the spaces they avoid. Using a public participatory geographic information system (PPGIS), the overall aim of the research presented here was to investigate the preferences of different population subgroups in urban areas, and the UGBS they visit, using Edinburgh, Scotland as a case study. We created a baseline visitor demographic profile for UGBS use, and highlighted how visitors perceive, physically access, use, and engage with UGBS. The results revealed considerable variation in UGBS preference: one person’s favourite UGBS may be one that someone else dislikes and avoids. It is clear that adapting UGBS to suit local communities should not be a ‘one-size-fits-all’ approach. The conflicting views and preferences of different groups of respondents point to the importance of developing policies and park management plans that can accommodate a variety of uses and experiential qualities within individual parks. PPGIS offers an ideal tool for achieving this

Storied Rocks (Tumpituxwinap) is a term of reference used by the Numic Speaking tribal elders whom we have worked with for over 60 years on an estimated 200 ethnographic studies. Key in this analysis are the protocols for approaching, interacting, and using the places where Storied Rocks have been located. Concomitant with these traditional protocols are ones established to resolve the curiosity of non-Natives about why they are in a particular place and what they mean. This analysis shares the cultural understandings of Tribal representatives who participated in these ethnographic studies. Studies used in the analysis were funded by U.S. federal agencies, supported by federally recognized Native American tribal governments, and composed with the cultural understandings shared and made public by tribally appointed elders to clarify the conundrums that are Storied Rocks.

In this brief review, the concepts of quantum tunneling and parity violation are introduced in the context of chiral molecules. A particle moving in a double well potential provides a good model to study the behavior of chiral molecules, where the left well and right well represent the L and R enantiomers, respectively. If the model considers the quantum behavior of matter, the concept of quantum tunneling emerges, giving place to a stereomutation dynamics between left- and right-handed chiral molecules. Parity-violating interactions, like the electroweak one, can be also considered, making possible the existence of an energy difference between the L and R enantiomers, the so-called parity-violating energy difference (PVED). Here we provide a brief account of some theoretical methods usually employed to calculate this PVED, also commenting on relevant experiments devoted to experimentally detect the aforementioned PVED in chiral molecules.

We show that the respective oversights in the von Neumann's general theorem against all hidden variable theories and Bell's theorem against their local-realistic counterparts are homologous. Both theorems unjustifiably assume the additivity of expectation values within hidden variable theories to derive their respective conclusions. However, for non-commuting observables, the equivalence of a sum of expectation values and the expectation value of the sum of measurement results, although respected within quantum mechanics, need not hold for hidden variable theories, regardless of specific characteristics such as local realism they may respect. Once this oversight is ameliorated from Bell's argument and local realism is implemented correctly, the bounds on the CHSH correlator work out to be +/-2\/2 instead of +/-2, thereby mitigating the conclusion of Bell's theorem. Consequently, what is ruled out by the Bell-test experiments is not local realism but the additivity of expectation values.

Influencer marketing has become a pivotal component of digital marketing strategies, offering brands a unique way to connect with audiences through trusted voices. However, measuring the return on investment (ROI) from influencer marketing campaigns can be challenging due to the intangible nature of brand influence and engagement. This abstract explores various techniques and strategies to measure and optimize ROI in influencer marketing. Measurement Techniques: The paper delves into both quantitative and qualitative methods for assessing influencer marketing ROI. Quantitative techniques include tracking metrics such as impressions, clicks, conversions, and sales, using tools like Google Analytics and social media insights. Additionally, advanced attribution models, such as multi-touch attribution and econometric modeling, are discussed for more accurately linking influencer activities to business outcomes. Qualitative approaches involve sentiment analysis and brand awareness studies, which help gauge the impact of campaigns on brand perception and customer loyalty. Optimization Strategies: To maximize the effectiveness of influencer marketing, the paper outlines several optimization strategies. These include selecting the right influencers based on audience alignment and engagement rates, setting clear and measurable campaign goals, and employing A/B testing to refine content and strategies. The importance of long-term partnerships and content diversification is also emphasized, as they can enhance authenticity and sustain audience interest. The abstract concludes that a comprehensive approach combining rigorous measurement techniques and strategic optimization can significantly enhance the ROI of influencer marketing campaigns. By continuously analyzing data and refining strategies, brands can better leverage influencer partnerships to achieve their marketing objectives.

In this paper, we establish some inequalities bounding the ratio Г_p,k(x)/Г_p,k(y), where Г_p,k(.) is the (p,k)-analogue of the Gamma function. Consequently, some previous results are recovered from the obtained results.

The advent of artificial intelligence (AI) has revolutionized digital marketing, offering unprecedented levels of personalization. AI-driven personalization leverages machine learning algorithms and data analytics to tailor content, advertisements, and recommendations to individual consumers based on their behavior, preferences, and demographics. This paper explores the effectiveness of AI-driven personalization in enhancing customer engagement, increasing conversion rates, and improving overall marketing efficiency. It also examines the ethical considerations associated with these technologies, including data privacy, consent, and the potential for manipulation or bias. While AI-driven personalization can lead to more relevant and engaging consumer experiences, it raises critical ethical questions that must be addressed to ensure responsible and fair use. The study concludes with recommendations for marketers and policymakers to balance the benefits of AI personalization with the need for ethical standards and consumer protection.

Perovskite-silicon tandem solar cells represent a significant advancement in photovoltaic technology, aiming to overcome the efficiency limitations of traditional silicon-based solar cells. This paper explores recent developments in the fabrication and optimization of these tandem cells, focusing on improving both efficiency and long-term stability. The combination of perovskite materials with silicon allows for broader spectrum absorption, which enhances the overall power conversion efficiency. Key strategies include optimizing the perovskite layer's composition, improving the interface between layers to reduce recombination losses, and incorporating advanced encapsulation techniques to mitigate degradation from environmental factors such as moisture and UV exposure. The review also highlights the challenges faced in scaling up production while maintaining high performance and stability. Emerging trends in material engineering and device architecture are discussed, providing insights into future directions for making perovskite-silicon tandem solar cells a viable commercial technology. This study underscores the potential of these hybrid systems to significantly boost the efficiency of photovoltaic systems, offering a promising pathway towards more sustainable and costeffective solar energy solutions.

We study the existence or absence of non-Shannon inequalities for variables that are related by functional dependencies. Although the power-set on four variables is the smallest Boolean lattice with non-Shannon inequalities there exist lattices with many more variables without non-Shannon inequalities. We search for conditions that excludes the existence of non-Shannon inequalities. It is demonstrated that planar modular lattices cannot have non-Shannon inequalities. The existence of non-Shannon inequalities is related to the question of whether a lattice is isomorphic to a lattice of subgroups of a group.

Coastal inundation is an increasing problem. Sea-level rise will greatly increase the frequency and depth of inundation, forcing vulnerable communities to adapt. Communities will need to decide when and how to adapt. The process of decision-making along adaptive pathways is now being used internationally to plan for adaptation over time by anticipating decision points in the future however it unfolds. This process requires risk and uncertainty considerations to be transparent in the scenarios used in such planning. We outline a framework for uncertainty identification and management within coastal hazard assessments which recognizes different types of decision and identifies the types of uncertainty that must be accounted for, such as statistical, scenario and deep uncertainty types. We show how coastal-inundation hazard can be mapped and presented in a way that clearly separates sources of uncertainty, so that they are transparent within a dynamic adaptive pathways planning process. Traditional coastal inundation maps show inundated area only. We present maps of inundation depth and frequency which clearly show the degree of exposure, where that exposure occurs, and how much sea-level rise can be tolerated. The new uncertainty framework and mapping techniques can better identify decision points and their expected time range, which provides more useful input to the adaptation process than traditional coastal inundation assessments.

The transition to renewable energy sources is critical for sustainable development, particularly in rural regions with limited access to electricity. Solar-powered microgrids offer a promising solution for rural electrification by providing reliable, clean energy that can enhance economic opportunities and improve quality of life. This paper presents a techno-economic analysis of solar-powered microgrids for rural areas, evaluating their feasibility, costs, and benefits. The analysis encompasses technological aspects, such as solar panel efficiency, battery storage, and grid management, alongside economic factors including initial investment, maintenance costs, and potential returns. Additionally, the study assesses the social impact of solar-powered microgrids, exploring their effects on local communities, including improvements in education, health, and economic activities. The findings indicate that solar microgrids can be a viable and impactful solution for rural electrification, with significant long-term benefits for both economic development and social well-being.

Recently, a concept known as μTRISTAN, which involves the acceleration of μ+, has been proposed. This initiative has led to considerations of a new design for a neutrino factory. Additionally, leveraging the polarization of μ+, measurements of T violation in neutrino oscillations are also being explored. In this paper, we present analytical expressions for T violation in neutrino oscillations within the framework of standard three flavor neutrino oscillations, a scenario involving nonstandard interactions, and a case of unitarity violation. We point out that examining the energy spectrum of T violation may be useful for probing new physics effects.

In this paper we establish several Hermite-Hadamard type integral inequalities for hyperbolic p-convex functions. Applications for special means are provided as well.

Metal additive manufacturing (AM), commonly referred to as 3D printing with metals, is an innovative technology with significant potential to transform industries such as aerospace, automotive, and healthcare. Despite its promise, the field faces several challenges that impact both its technical feasibility and economic viability. This paper explores the primary technical challenges, including material properties and processing complexities, such as the need for precise control of thermal gradients and the mitigation of defects like porosity and residual stresses. Additionally, it addresses the economic barriers, including high initial equipment costs, the need for specialized knowledge, and the relatively slow build speeds compared to traditional manufacturing methods. By examining these challenges, this paper aims to provide a comprehensive overview of the current state of metal additive manufacturing and suggest potential pathways for overcoming these obstacles to facilitate wider adoption and technological advancement in the field.

Sustainability in Additive Manufacturing (AM) is an emerging area of research that examines the environmental impacts and potential benefits of AM processes compared to traditional manufacturing methods. This paper analyzes the environmental footprint of additive manufacturing technologies, including material usage, energy consumption, and waste production. AM techniques, such as fused deposition modeling (FDM), stereolithography (SLA), and selective laser sintering (SLS), are evaluated for their efficiency and sustainability. Key factors such as resource utilization, lifecycle emissions, and recyclability are assessed to determine how AM can contribute to a more sustainable manufacturing paradigm. The study highlights that while AM offers advantages such as reduced material waste and the potential for localized production, it also poses challenges, including high energy consumption and limited material options. The paper concludes with recommendations for improving the environmental performance of AM, including advancements in material science, energy-efficient technologies, and the integration of circular economy principles. By addressing these aspects, AM can play a significant role in achieving sustainability goals in manufacturing.

The integration of additive manufacturing (AM), commonly known as 3D printing, has revolutionized aerospace engineering by enabling the creation of complex, lightweight, and high-performance components. This paper explores the transformative impact of AM technologies on the design, production, and maintenance of aerospace systems. The aerospace industry demands high precision, reduced weight, and enhanced performance, all of which are facilitated by AM's ability to produce intricate geometries and optimize material usage. Key applications of AM in aerospace include the fabrication of engine components, structural parts, and customized tooling. The technology's capability to produce parts with complex internal structures, such as lattice designs, leads to significant weight reductions without compromising strength and durability. Furthermore, AM allows for rapid prototyping, enabling faster iteration and development cycles, which is crucial in the highly competitive aerospace sector.

Additive manufacturing (AM), commonly known as 3D printing, has emerged as a transformative technology in supply chain management (SCM). This abstract explores how AM influences various aspects of SCM, including inventory management, production processes, and logistics. By enabling on-demand production and reducing reliance on traditional manufacturing methods, AM minimizes inventory costs and enhances customization capabilities. It also facilitates localized production, which can reduce lead times and transportation costs. The integration of AM into SCM fosters greater flexibility and resilience, allowing businesses to respond more swiftly to market changes and disruptions. This study highlights both the opportunities and challenges associated with adopting AM, emphasizing the need for strategic adjustments to fully leverage its potential in modern supply chains.

The advancement of high-temperature structural materials is crucial for the efficiency and performance of modern gas turbines, which are widely used in aviation and power generation. This paper explores the development and optimization of materials capable of withstanding extreme temperatures, mechanical stresses, and corrosive environments within turbine engines. The focus is on nickel-based superalloys, ceramic matrix composites (CMCs), and emerging materials such as high entropy alloys (HEAs) and refractory metals. Nickel-based superalloys are the current standard due to their excellent high-temperature strength and creep resistance, while CMCs offer potential for weight reduction and improved thermal efficiency. High entropy alloys, characterized by their unique multi-component systems, present promising properties including high strength and oxidation resistance at elevated temperatures. Additionally, advances in coating technologies and additive manufacturing are enhancing the durability and performance of these materials. The paper also discusses the challenges associated with material development, including the trade-off between strength and ductility, manufacturing complexities, and the need for long-term performance data. Future research directions are identified, focusing on the integration of computational materials science and advanced characterization techniques to accelerate the discovery and implementation of next-generation high-temperature materials. The successful development of these materials is essential for improving the efficiency and reducing the environmental impact of gas turbines.

In the evolving landscape of digital marketing, cross-channel attribution modeling plays a crucial role in understanding and optimizing the customer journey across various touchpoints. As consumers interact with brands through multiple channels—such as social media, email, search engines, and display ads—accurately attributing conversions to the right channels is vital for optimizing marketing strategies and budgets. However, the advent of stringent privacy regulations, such as the General Data Protection Regulation (GDPR) and the California Consumer Privacy Act (CCPA), has significantly impacted the data collection and analysis processes in digital marketing. This paper explores the challenges and opportunities presented by cross-channel attribution modeling in the age of heightened privacy awareness. It examines how traditional data-driven attribution models, which often rely on tracking individual user behavior, are being adapted or replaced in response to privacy concerns and regulatory requirements. The paper discusses the emergence of privacy-preserving techniques, such as aggregated data analysis, differential privacy, and the use of anonymized data, which aim to balance the need for accurate attribution with the protection of consumer privacy. Furthermore, the paper highlights the role of first-party data and the growing importance of consent management in the collection and utilization of consumer information. It also investigates how marketers are leveraging advancements in artificial intelligence and machine learning to enhance attribution models in a privacy-conscious world. The study concludes by offering best practices for businesses seeking to navigate the complexities of cross-channel attribution in the context of evolving privacy regulations, emphasizing the need for transparency, compliance, and ethical data handling. This research provides valuable insights for marketers, data scientists, and policymakers on how to effectively manage the interplay between accurate attribution and privacy, ensuring that marketing efforts remain effective while respecting consumer rights.

Quantum theory predicts a whole class of non-local phenomena, observable via coincident detection of EPR-type systems. An important feature of these observations is their non-signaling character. Technically, non-local phenomena should only be observable for post-selected sub-ensembles, rather than for complete projections. Otherwise, superluminal telegraphy becomes possible. Yet, a couple of recent Bell experiments reported the observation of quantum non-locality for 100% of the detected events. Does it follow that signaling non-locality is possible? If so, was quantum theory falsified? This puzzle is solved by revisiting the interpretation of the spin projection operator, with special focus on its dual nature (combining spectral decomposition with spectral transformation). “Component switching” is not a loophole, but rather a requirement of quantum mechanics in this context, because sharp spin projections are partial (as well as partially overlapping). Surprisingly, it is possible to pre-select incompatible statistical sub-ensembles with heralded detection and to reveal the same behavior as in post-selected observations. Therefore, Bell experiments confirm the predictions of quantum theory without violating the non-signaling principle.

Geijera Schott is a plant genus of the Rutaceae Juss. (rue and citrus) family, comprising six species which are all native to Oceania. Of the plants belonging to this genus, the most significant species that has a customary use is Geijera parviflora, which was used by Indigenous Australians, primarily as a pain reliever. Herein, a comprehensive review of the literature published on the genus Geijera from 1930-2023 was conducted. This is the first review for this plant genus and it highlights the chemical constituents reported to date, together with the range of pharmacological properties described from the various species and different parts of the plant. These properties include anti-inflammatory, anti-microbial, anti-parasitic, insect repellent, analgesic, neuroactive, and anti-cancer activities. Finally, a reflection on some of the important areas for future focused studies of this plant genus is provided.

While it is generally accepted that food habits established during infancy will track into later childhood, longitudinal analysis of children’s food preferences is rare. This paper examines whether maternal-reported child food preferences at five years of age are the same as that reported at two years; and identifies any patterns of change from two- to five- years. Mothers in the Australian NOURISH trial reported child food preferences at two and five years of age. A four point scale was utilised - ‘like’, ‘neither like or dislike’, ‘dislike’, ‘never tried’. The proportion of children having the same preference at the two time points was calculated (95%CI) for 48 foods (cereals, 4; vegetables, 20; fruit, 14; meat/alternatives, 6; dairy, 4). For foods where ≤50% children had consistent preferences, the pattern of food preference change was determined. For 40/48 foods, more than half of the children were reported to have the same preference at two years of age, and three years later, at age five. Foods for which ≤50% children had the same preference at both ages were high-sugar breakfast cereals, zucchini, mushrooms, eggplant, spinach, lettuce, cabbage and celery. Findings reinforce the importance of promoting a consistent message regarding early and frequent exposure to a variety of healthy foods, particularly during the first 2 years of life, as the preferences established in these early years are likely to be maintained over time.

In this work, new refinements of some numerical radius inequalities are proved. Namely, new improvements and refinements purify the recent inequalities of some famous inequalities concerning the numerical radius of Hilbert space operators. The proven inequalities in this work are not only an improvement over old inequalities, but rather they are stronger than them. Several examples that support the validity of our results are established as well.

The human casualties from simulated nuclear detonation scenarios in New Delhi, India are analyzed, with a focus on the distribution of casualties in urban environments and the theoretical application of a nuclear-specific triage system. Model estimates of nuclear war casualties employed ESRI's ArcGIS 9.3, blast and prompt radiation were calculated using the Defense Nuclear Agency's WE program, and fallout radiation was calculated using the Defense Threat Reduction Agency's (DTRA's) Hazard Prediction and Assessment Capability (HPAC) V404SP4, as well as custom GIS and database software applications. ESRI ArcGISTM programs were used to calculate affected populations from the Oak Ridge National Laboratory's LandScanTM 2007 Global Population Dataset for areas affected by thermal, blast and radiation data. Trauma, thermal burn, and radiation casualties were thus estimated on a geographic basis for New Delhi, India for single and multiple (six) 25 kiloton (kt) detonations and a single 1 megaton (1000kt) detonation. Major issues related to the emergency management of a nuclear incident are discussed with specific recommendations for improvement. The consequences for health management of thermal burn and radiation patients is the worst, as burn patients require enormous resources to treat, and there will be little to no familiarity with the treatment of radiation victims.

Some refinements and reverses of the Fejer's inequality for convex functions are given.

Theories of quantum gravity suggest that Lorentz invariance, the fundamental symmetry of the Theory of Relativity, may be broken at the Planck energy scale. While any deviation from conventional Physics must be minuscule in particular at attainable energies, this hypothesis motivates ever more sensitive tests of Lorentz symmetry. In the photon sector, astrophysical observations, in particular polarization measurements, are a very powerful tool because tiny deviations from Lorentz invariance will accumulate as photons propagate over cosmological distances. The Standard-Model Extension (SME) provides a theoretical framework in the form of an effective field theory that describes low-energy effects due to a more fundamental quantum gravity theory by adding additional terms to the Standard Model Lagrangian. These terms can be ordered by the mass dimension d of the corresponding operator and lead to a wavelength, polarization, and direction dependent phase velocity of light. In this paper, we analyze optical polarization measurements from 63 Active Galactic Nuclei (AGN) and Gamma-ray Bursts (GRBs) in order to search for Lorentz violating signals. We derive the first set limits on each of the 10 individual birefringent coefficients of the minimal SME with d = 4, with 95% confidence limits on the order of 10⁻³⁴ on the dimensionless coefficients.

Frequent flooding from sea-level rise (SLR) is one of the immediate climate change impacts affecting low-lying and exposed coastal communities. These communities rely upon the delivery of three-waters services for wastewater, stormwater and water supply. Due to ongoing SLR, managing these networks will increasingly be a challenge. This raises the issue of how local government can reconcile maintaining levels of service as the impacts of climate change and their uncertainties worsen over the coming decades (and beyond). Can they be adapted over time to retain levels of service or will they eventually require retreat and if so at what adaptation threshold? This paper explores managed retreat of two-waters infrastructure (wastewater and stormwater) as an adaptation option using a Dynamic Adaptive Pathway Planning (DAPP) approach. In the study, we use DAPP to frame the retreat of two-water networks, developing a combination of an area specific retreat strategy, pathway portfolios, retreat phases, land use change signaling and identify pathway conflicts and synergies. Repurposing retreated areas by utilizing Water Sensitive Urban Design (WSUD) options was found to extend retreat thresholds for adjacent areas. A systematic ’routine’ developed in this study provides a structured approach for managed retreat of two-water infrastructure with the aim to reduce future disruption from flooding, signal land use changes early and allow for gradual budget adjustments by the agencies to manage expenditure over time. This approach helps inform and improve the decision-making process for the agencies and the communities they serve, by providing a stepwise process that can be communicated spatially and visually, thereby making a retreat adaptation option more manageable.

Lipids have not traditionally been considered likely candidates for catalyzing reactions in biological systems. However, there is significant evidence that aggregates of amphiphilic compounds are capable of catalyzing reactions in synthetic organic chemistry. Here we demonstrate the potential for the hydrophobic region of a lipid bilayer to provide an environment suitable for catalysis by means of a lipozyme, or lipid aggregate capable of speeding up a chemical reaction. By bringing organic molecules into the non-polar or hydrophobic region of a lipid bilayer, reactions can be catalyzed by collections of small, nonpolar or amphiphilic molecules. We demonstrate this concept by the ester hydrolysis of calcein-AM to produce a fluorescent product, which is a widely used assay for esterase activity in cells. The reaction was first carried out in a two phase octanol-water system with the organic phase containing the cationic amphiphiles cetyltrimethylammonium bromide (CTAB) or octadecylamine. The octanol was then replaced with DOPC added to the water in the form of vesicles, where the reaction was also found to be carried out. The reaction was monitored using quantitative fluorescence which revealed catalytic turnover numbers on a scale of 10−4s−1 for each system, which is comparable to some slow enzymes. The reaction product was characterized by 1H-NMR measurements which were consistent with ester hydrolysis. The implications of thinking about lipid aggregates as catalytic entities are discussed in the context of biochemistry, pharmacology and synthetic biology.

In this work, we introduce the class of h-MN-convex functions by generalizing the concept of MN-convexity and combining it with h-convexity. Namely, let M : [0, 1] → [a, b] be a Mean function given by M (t) = M (t; a, b); where by M (t; a, b) we mean one of the following functions: A_t (a, b) := (1 − t) a + tb, G_t (a, b) = a^1−tb^t and H_t (a, b) := $\frac{ab}{ta+\left(1-t\right)b}=\frac{1}{A_t\left(\frac{1}{a},\frac{1}{b}\right)}$ with the property that M (0; a, b) = a and M (1; a, b) = b. Let I, J be two intervals subset of (0, ∞) such that (0, 1) ⊆ J and [a, b] ⊆ I. Consider a non-negative function h : J → (0, ∞), a function f : I → (0, ∞) is said to be h-MN-convex (concave) if the inequality f (M (t; x, y)) ≤ (≥) N (h(t); f (x), f (y)), holds for all x, y ∈ I and t ∈ [0, 1]. In this way, nine classes of h-MN-convex functions are established, and therefore some analytic properties for each class of functions are explored and investigated. Characterizations of each type are given. Various Jensen’s type inequalities and their converses are proved.

In this work, we investigate the behaviour of relativistic quantum oscillator under the effects of Lorentz symmetry violation determined by a tensor $(K_F)_{\mu\nu\alpha\beta}$ out of the Standard Model Extension. We analyze this relativistic system under an inverse radial electric field and a constant magnetic field induced by Lorentz symmetry violation. We see that the presence of Lorentz symmetry breaking terms modified the energy spectrum of the system, and a quantum effect arise due to the dependence of the linear charge density on the quantum numbers of the system

The microbioma is presently one of the hottest areas of scientific and medical research and exerts a marked influence on the host during homeostasis and disease. Fermented foods arise in the human relationship to the microbial environment. Further to the traditionally recognized effects of fermented foods and beverages on the digestive health and well-being there is now strong evidence on their general health benefits, namely the significance on the gut microbiota and brain functionality. We highlight the possibilities in this field, how little is still known, and call for a convergence of interdisciplinary research fields of One Health microbe-nutrition with fermented foods and gut-brain research. A consequence of civilisation, changes in present-day society in diets with more sugar, fat and salt, habits and lifestyle, contributes to the likelihood of an inflammatory microbiome, particularly the global epidemics of obesity and mental health. Although two recent papers claim that probiotics perturb rather than aid in microbiota recovery back to baseline after antibiotic administration in humans, consuming fermented foods has shown to reduce inflammation so improve gut health and the proper function of the body’s immune system.

The escalating antibiotic crisis in Nigeria presents a critical challenge, violating fundamental human rights and ethical obligations. Skyrocketing antibiotic costs severely restrict access to essential medications, particularly for vulnerable populations. This crisis not only exacerbates health disparities but also fuels the emergence of antibiotic resistance, posing grave public health risks. Rooted in regulatory gaps, lack of transparency in drug pricing, and inadequate healthcare infrastructure, the crisis demands a comprehensive, collaborative response. Policy interventions targeting antibiotic affordability, regulatory reforms, and healthcare infrastructure investments are imperative. Upholding ethical standards and accountability mechanisms is essential to ensuring equitable access to antibiotics and safeguarding public health in Nigeria.

Following a recent proof of Shannon's entropy power inequality (EPI), a comprehensive framework for deriving various EPIs for the Rényi entropy is presented that uses transport arguments from normal densities and a change of variable by rotation. Simple arguments are given to recover the previously known Rényi EPIs and derive new ones, by unifying a multiplicative form with constant c and a modification with exponent α of previous works. In particular, for log-concave densities, we obtain a simple transportation proof of a sharp varentropy bound.

This paper aims to unify q-derivative/q-integral and h-derivative/h-integral in a single definition, this will be called q−h-derivative/q−h-integral. These notions are further extended on finite interval [a,b] in the form of left and right q−h-derivatives and q−h-integrals. Some inequalities are studied for q−h-integrals which are directly connected with well known results. In diverse fields of science and engineering the theory based on q-derivatives/q-integrals and h-derivatives/h-integrals can be unified by using the concept of q−h-derivative/q−h-integral.

In this work, some numerical radius inequalities based on the recent Dragomir extension of Furuta's inequality are obtained. Some particular cases are also provided.

In this paper we establish some weighted integral inequalities of Ostrowski, Čebyšev and Lupaş type. Applications for continuous probability density functions supported on infinite intervals with two examples are also given.

Additive manufacturing (AM), commonly known as 3D printing, has revolutionized the production of complex geometries that were once challenging or impossible to achieve through traditional manufacturing techniques. This paper investigates the capabilities of additive manufacturing in producing intricate designs, focusing on the unique advantages and potential applications across various industries. Additive manufacturing enables the creation of complex geometries by adding material layer by layer, allowing for greater design freedom and the ability to produce structures with intricate internal features, complex curves, and lightweight lattice structures. This capability is particularly advantageous in fields such as aerospace, biomedical, and automotive, where weight reduction, customization, and the integration of complex internal channels are critical. The study explores various additive manufacturing technologies, including stereolithography (SLA), selective laser sintering (SLS), and fused deposition modeling (FDM), highlighting their specific strengths and limitations in producing complex geometries. Factors such as material properties, resolution, surface finish, and build size are analyzed to determine the suitability of different AM processes for specific applications. Additionally, the research delves into the design considerations and software tools that facilitate the creation of complex geometries in AM, including generative design and topology optimization. These tools leverage the design freedom offered by AM to optimize structures for weight, strength, and functionality, pushing the boundaries of what is possible in product design. The paper concludes with an examination of the challenges and future directions in the field, such as improving material properties, reducing production costs, and enhancing the accuracy and reliability of AM processes. The potential of additive manufacturing to revolutionize the production of complex geometries is underscored, emphasizing its growing importance in modern manufacturing and its role in enabling innovative solutions across various industries. This abstract provides an overview of the potential and challenges of additive manufacturing for producing complex geometries, suitable for an academic paper or report. If you need more specific information or have a different focus, feel free to ask!

Additive Manufacturing (AM), commonly known as 3D printing, has revolutionized various industries, including the medical field. This technology enables the creation of complex structures layer by layer, offering unprecedented customization and precision. In medical applications, AM has proven transformative in producing patient-specific implants, prosthetics, and anatomical models, facilitating better surgical planning and outcomes. Additionally, it has shown promise in bioprinting, where cells and biomaterials are used to create tissue-like structures for regenerative medicine. The ability to rapidly prototype and manufacture medical devices reduces time and costs, and enhances personalized patient care. This abstract explores the diverse applications, benefits, and challenges of AM in the medical sector, highlighting its potential to revolutionize healthcare and improve patient outcomes.

In the digital age, social media platforms have become a critical channel for brands to engage with their audience and manage their reputation. This paper explores the application of sentiment analysis in social media to aid brand reputation management. Sentiment analysis, a subset of natural language processing (NLP), involves determining the emotional tone behind online discussions and opinions. By leveraging machine learning algorithms and NLP techniques, brands can analyze vast amounts of social media data to gauge public sentiment, identify emerging trends, and detect potential issues before they escalate. This study reviews current methodologies in sentiment analysis, including supervised and unsupervised learning approaches, and discusses their effectiveness in extracting actionable insights from social media content. Additionally, it examines case studies where sentiment analysis has been successfully implemented to enhance brand reputation, address customer concerns, and tailor marketing strategies. The findings highlight the importance of continuous monitoring and adaptation to dynamic social media landscapes for maintaining a positive brand image. This paper provides a comprehensive overview of sentiment analysis tools and techniques, offering practical recommendations for brands seeking to leverage social media sentiment data for proactive reputation management.

The field of polymer additive manufacturing (AM) has experienced rapid evolution, marked by significant advancements in materials science and technology. This paper reviews recent innovations in polymer materials tailored for additive manufacturing processes, focusing on enhancements in mechanical properties, functionalization, and processability. Key developments include the introduction of high-performance thermoplastics, composite materials incorporating fibers or nanoparticles, and novel photocurable resins. These materials offer improved strength, durability, and versatility compared to traditional polymers. Furthermore, research into bio-based and recyclable polymers highlights a growing trend towards sustainable manufacturing practices. Advances in material formulations, including self-healing and shape-memory polymers, are also examined for their potential to transform applications across various industries. This review synthesizes current research trends and provides a comprehensive overview of the state-of-the-art in polymer AM materials, emphasizing the impact of these innovations on the future of manufacturing technologies.

On-farm research was conducted at Gouripur sub-district under Mymensingh district of Bangladesh during the boro (mid November-June) season in 2013-14 and 2014-15 to evaluate the performance of non-puddled rice cultivation with and without crop residue retention. The rice var. BRRI dhan28 was transplanted by two tillage practices viz., puddled conventional tillage (CT) and non-puddled strip tillage (ST) and at two levels of mustard residues, i.e., no residue (R₀) and 50% residue (R₅₀). The experiment was designed in a randomized complete block design with four replications. There were no significant yield differences between tillage practices and residue levels in 2013-14. But in the following year, ST yielded 9% more grain compared to CT leading to 22% higher BCR. Retention of 50% residue increased yield by 3% compared to no-residue, which contributed to 10% higher benefit-cost ratio (BCR). The ST combined with 50% residue retention yielded the highest grain yield (5.81 t ha^-1) which contributed to produce the highest BCR (1.06).

In the paper, using two inversion theorems for the Stirling numbers and binomial coecients, employing properties of the Bell polynomials of the second kind, and utilizing a higher order derivative formula for the ratio of two dierentiable functions, the authors present two explicit formulas, a determinantal expression, and a recursive relation for a sequence of unnamed polynomials, derive two identities connecting the sequence of unnamed polynomials with the Bell polynomials, and recover a known identity connecting the sequence of unnamed polynomials with the Bell polynomials.

There is a need for strategic healthcare workforce planning to address shortages and ensure universal health coverage, aiming to optimize work-force per population ratio, distribution, and competencies. Amidst rising demands exacerbated by aging populations and events like the COVID-19 pandemic, strategic workforce planning becomes crucial for addressing healthcare inequalities by forecasting needs, bridging skill gaps, and adapting to changing demographics and care models. Israel has invested in strategic planning to tackle healthcare workforce challenges; however, globally there is insufficient planning informed by health labor market analysis, which hinders efforts to address healthcare inequalities. The paper reviews national policies in Israel, Australia, Germany, and Norway, ex-amining statistics and government publications to highlight strategic plan-ning considerations and address challenges in healthcare workforce plan-ning. This paper focuses both on the critical role of physicians in healthcare systems, and on the changing borders between healthcare professions and different national contexts which demand more context dependent strategic workforce planning. We highlight common themes among national policies, including the need for data collection, increasing the capacity of domestic training programs, and the need to address geographic maldistribution of physicians. Ultimately, we aim to guide policy in the development of a re-silient and sustainable healthcare workforce capable of meeting diverse community needs and promoting equity in healthcare services.

In this paper we obtain some inequalities of Hermite-Hadamard type for composite convex functions. Applications for AG, AH-convex functions, GA, GG, GH-convex functions and HA, HG, HH-convex function are given. Applications for p, r-convex and LogExp functions are presented as well.

When farmers first shift from conventional tillage (CT) to conservation agriculture (CA) practice the control of weeds may be more difficult due to the absence of tillage. However, in the longer term (3-5 years), CA changes to weed dynamics may alter the weed seedbank. The nature of weed seedbank changes over time in intensively cropped rice-based rotations, that are typical of the Eastern Gangetic Plain, are not well understood. Three long term CA experiments were sampled (at Rajbari after 3 years and Rajshahi after 5 years) for effects of decreased soil disturbance strip planting (SP) and bed planting (BP) at both sites and Zero tillage (ZT) at Rajbari, increased retention of standing residues of previous crops (20 vs 50 %). The weed seedbank in 0-15 cm soil was quantified by assessing emergence from trays a net-house experiment during January-December 2016. The year-round count of emerged weeds revealed the fewest number of weed species (especially broadleaf weeds) and lowest weed density in SP followed by CT, BP, and ZT with 50% crop residues. The SP, BP, and ZT produced a higher number of perennials weeds than annual weeds, which was the opposite of CT. The continuous practice of SP and increased crop residue retention for 3 or more years decreased the size of weed seedbank but increased the relative proliferation of perennial weeds compared to CT. Weed seedbank size in SP was even smaller than BP and ZT.

The basic constitutional freedoms and rights of a person and citizen are in principle unlimited: the full scope of their exercise is the rule, and the restriction determined by law can only be an exception based on explicit constitutional authority and the legitimate aim of the restriction determined by the Constitution. That being so, the restrictions - in addition to being based on constitutional authority and pursuing constitutional objectives - should be commensurate with the needs to achieve these objectives. This means that restrictive legal rules must be suitable for achieving the legitimate aim pursued, must not be stricter than necessary and must be balanced between the constitutionally guaranteed subjective right of the individual and the interests of society. In this scholar paper, the authors point out the economic and legal consequences of the violation of individual privacy and data protection rights caused by the public disclosure of personal data of people who, at a certain time, were obliged to self-isolate due to suspicion of Covid-19 virus infection.

One of the manifestations of Lorentz invariance violation (LIV) is vacuum birefringence, which leads to an energy-dependent rotation of the polarization plane of linearly polarized photons arising from an astrophysical source. Here we use the energy-resolved polarization measurements in the prompt $\gamma$-ray emission of five bright gamma-ray bursts (GRBs) to constrain this vacuum birefringent effect. Our results show that at the 95\% confidence level, the birefringent parameter $\eta$ characterizing the broken degree of Lorentz invariance can be constrained to be $|\eta|<\mathcal{O}(10^{-15}-10^{-16})$, which represent an improvement of at least eight orders of magnitude over existing limits from multi-band optical polarization observations. Moreover, our constraints are competitive with previous best bounds from the single $\gamma$-ray polarimetry of other GRBs. We emphasize that, thanks to the adoption of the energy-resolved polarimetric data set, our results on $\eta$ are statistically more robust. Future polarization measurements of GRBs at higher energies and larger distances would further improve LIV limits through the birefringent effect.

In this work, linear confinement of a relativistic scalar particle under the effects of Lorentz symmetry violation is investigated. We introduce a scalar potential by modifying the mass via transformation M → M + S(r) in the wave equation, and analyze the effects on the eigenvalues and the wave function. We see that the solution of the bound state to the wave equation can be achieved, and the energy eigenvalues and the wave function modified by the Lorentz symmetry breaking parameters as well as potential

Raman Spectroscopy has long been anticipated to augment clinical decision making, such as classifying oncological samples. Unfortunately, the complexity of Raman data has thus far inhibited its routine use in clinical settings. Traditional machine learning models have been used to help exploit this information, but recent advances in deep learning have the potential to improve the field. However, there are a number of potential pitfalls with both traditional and deep learning models. We conduct a literature review to ascertain the recent machine learning methods used to classify cancers using Raman spectral data. We find that while deep learning models are popular, and ostensibly outperform traditional learning models, there are many methodological considerations which may be leading to an over-estimation of performance: primarily, small sample sizes which compound upon sub-optimal choices regarding sampling and validation strategies. Amongst several recommendations is a call to collate large benchmark Raman datasets, similar to those that have helped transform digital pathology, which researchers can use to develop and refine deep learning models.

This paper introduces extensions H4,p and X8,p of Horn’s double hypergeometric function H4 and Exton’s triple hypergeometric function X8, taking into account recent extensions of Euler’s beta function, hypergeometric function, and confluent hypergeometric function. Among the numerous extended hypergeometric functions, the primary rationale for choosing H4 and X8 is their comparable extension type. Next, we present various integral representations of Euler and Laplace type, Mellin and inverse Mellin transforms, Laguerre polynomial representation, transformation formulae and a recurrence relation for the extended functions. In particular, we provide a generating function for the X8,p and several bounding inequalities for the H4,p and X8,p.

In this paper we survey some recent results due to the author concerning various inequalities and approximations for the finite Hilbert transform of a function belonging to several classes of functions, such as: Lipschitzian, monotonic, convex or with the derivative of bounded variation or absolutely continuous. More accurate estimates in the case that the higher order derivatives are absolutely continuous, are also provided. Some quadrature rules with error bounds are derived. They can be used in the numerical integration of the finite Hilbert transform and, due to the explicit form of the error bounds, enable the user to predict a priory the accuracy.

In this paper we obtain some inequalities of Hermite-Hadamard type for composite convex functions. Applications for AG, AH-h-convex functions, GA, GG, GH-h-convex functions and HA, HG, HH-h-convex function are given.

In this paper we establish some generalizations of Opial’s inequal- ities for Riemann-Stieltjes integral and for two functions. Applications related to trapezoid and Grüss’ ’type inequalities are also given.

In this study, we define new classes of convexity called of h-Godunova-Levin and h-Godunova-Levin preinvexity, through which some new inequalities of Hermite-Hadamard type were established. These new classes are the generalisation of several known convexity including the s-convex, P-function, Godunova-Levin. Further, the properties of h-Godunova-Levin function were also discussed. Meanwhile, the applications of h-Godunova-Levin Preinvex function are given

In this work, several inequalities of Popoviciu type for h-MN-convex functions are proved, where M and N are denote to Arithmetic, Geometric and Harmonic means and h is a non-negative superadditive or subadditive function.

The green biomass of horticultural plants contains valuable secondary metabolites (SM) which can potentially be extracted and sold. When exposed to stress, plants accumulate higher amounts of these SMs, making the extraction and commercialization even more attractive. We evaluated the potential for accumulating of the flavones cynaroside and graveobioside A in leaves of two bell pepper cultivars (Mavras and Stayer) when exposed to salt stress (100 mM NaCl), UVA/B excitation (UVA 4-5 W/m²; UVB 10-14 W/m² for 3 hours per day) or a combination of both stressors. HPLC analyses proved the enhanced accumulation of both metabolites under stress conditions. Cynaroside accumulation is effectively triggered by high-UV stress, whereas graveobioside A contents increase under salt stress. Highest contents were observed in plants exposed to combined stress. Effects of stress on overall plant performance differed significantly between treatments, with least negative impact on aboveground biomass found for high-UV stressed plants. The usage of two non-destructive instruments (Dualex and Multiplex) allowed us to gain insights in ontogenetical effects at the leaf level and temporal development of SM contents over time. Indices provided by those devices correlate fairly with amounts detected via HPLC (Cynaroside: R2 = 0.46 – 0.66; Graveobioside A: R2 = 0.51 – 0.71). The concentrations of both metabolites tend to decrease at leaf level during the ontogenetical development even under stress conditions. High-UV stress is a promising tool for enriching plant leaves with valuable SM without major effects on plant biomass. All data is available online [1].

Despite their Nobel prize-winning empirical confirmation, the interpretation of the Bell inequality remains controversial. By carefully analyzing Bell's work on nonlocality, we show how the correct appreciation of Bell's rationale calls for reformulating a widespread argument on quantum nonlocality, yielding a more consistent formulation of the problem. We delve into a formal proof of quantum mechanics' violation of local causality strikingly overlooked in favor of less appropriate arguments. For completeness, we also mention a few alternatives that may rationally justify considering quantum mechanics as a local theory.

We investigate a scalar particle under Lorentz symmetry breaking effects determined by a tensor out of the Standard Model Extension (SME) in the presence of a Cornell-type potential by modifying the mass term M → M +S in the KG-equation. The field configuration is such that a Coulomb-type radial electric field and a constant magnetic field can be induced by Lorentz symmetry violation, and analyze the behaviour of a scalar particle. One can see that the bound states solution to the KG-equation under the consider effects can be achieved, and a quantum effect characterized by the dependence of charge density distribution parameter on the quantum numbers of the system is observed.