The new slide roller burnishing (SRB) method has been developed to produce mirror-like surfaces. Unlike conventional roller burnishing (RB), SRB is implemented through a unique device that allows the axes of the deforming roller and the rotary workpiece to cross resulting in a relative sliding velocity that can be controlled (in magnitude and direction) by varying the crossing angle. In the present work, the effect of SRB on the fatigue behavior of AISI 316 steel fatigue specimens was investigated by comparing with a conventional RB using the basic correlation in surface engineering: finishing–surface integrity (SI)–operating behavior. To obtain a more representative picture of the comparison, we implemented each method (RB and SRB) with two combinations of governing factors: (A) a radius of the roller toroidal surface of 3 mm, a burnishing force of 250 N and feed rate of 0.05 mm/rev (RB-A and SRB-A) and (B) a radius of the roller toroidal surface of 4 mm, a burnishing force of 550 N and feed rate of 0.11 mm/rev (RB-B and SRB- B). Both SRB-A (crossing angle of –45°) and SRB-B (crossing angle of –30°) achieved mirror-finish surfaces. SRB-B lead to the greatest fatigue strength and, thus, the longest fatigue life among all tested processes. SRB-B created the deepest zone (>0.5 mm) with residual compressive macro-stresses and a clearly defined modified surface layer, whose thickness of more than 20 m is about twice that created by the other three processes.

Pseudolysimachion nakaianum (Ohwi) T.Yamaz. is an endemic species that is an important species in the forest ecosystems of South Korea. This study aimed to develop an in vitro propagation system for P. nakaianum, to enhance the availability of this rare and endemic plant for commercial horticulture and restoration efforts. We utilized cotyledon explants from in vitro germinated seeds and two types of explants (petiole and leaf) from in vitro seedlings to assess the impact of five different cytokinins on adventitious shoot organogenesis in P. nakaianum. The half-strength Murashige and Skoog (MS) medium, supplemented with 10 µM thidiazuron (TDZ) for both cotyledon and petiole explants, yielded the highest shoot induction rates (61.1 ± 9.6% and 26.7 ± 8.8%, respectively) and the greatest number of shoots (3 ± 0.6 and 4.4 ± 0.5, respectively). Responses from leaf explants were variable, with none showing in vitro regeneration. Successfully acclimatized P. nakaianum plantlets in a greenhouse demonstrated normal growth. This protocol outlines an effective method for the direct in vitro regeneration from cotyledon and petiole explants of P. nakaianum, providing valuable information for the conservation of this species.

Today, enhancing food preservation and safety in the spirit of the bioeconomy suggests the use of biodegradable polymers such as poly-L-lactic acid (PLA) in food packaging and the replacement of chemical additives with natural antioxidant/antibacterial agents such as essential oils and their derivatives. Herein a novel carvacrol (CV) @ natural zeolite (NZ) nanohybrid was developed by employing a new vacuum adsorption desorption method which results in the adsorption of a high CV amount on NZ equal to 61.7 %wt. This CV@NZ nanohybrid was successfully dispersed in a PLA/triethyl citrate (TEC) matrix via a melt-extrusion process to obtain PLA/TEC/xCV@NZ nanocomposite films with 5, 10 and 15 CV@NZ %wt. content. PLA/TEC/xNZ films were also de-veloped for comparison. The overall study resulted in a biodegradable active film with the fol-lowing properties: 10%wt. CV@NZ content (PLA/TEC/10CV@NZ), self-healable properties, 22% higher tensile strength and 40% higher elongation at break, 45% higher water barrier and 40% higher oxygen barrier than pure PLA/TEC matrix. This film also provides high CV release content, high CV control release rate as well as significant antioxidant activity and antibacterial activity against the food pathogens Staphylococcus aureus and Salmonella enterica spp. enterica serovar Typhimurium. This film not only succeeds in extending the shelf-life of fresh pork minced, as shown by total variable count measurements in four days, but also prevents lipid oxidation of fresh minced pork and maintains the minced meat in higher nutritional conditions, as revealed by the heme iron content determination, and in a much better and acceptable sensory condition than the commercial packaging paper.

Firefighters Protective Clothing consist of several layers of different properties and functions. The layers create barriers against dangerous outer factor. However, they are also barriers to transport of sweat produced by human organism. It causes that very often sweat in the form of vapor is not transferred effectively from the human organism through the FPC to environment. This leads to sweat condensation on the skin of the FPC user causing his discomfort. In order to ensure as good as possible physiological comfort of firefighter while firefighting and other rescue actions it is necessary to take into consideration the transport of condensed sweat in the multilayer textile set creating the FPC. In the presented work four variants of multilayer textile sets for the FPC have been tested in the aspect of liquid moisture transport. Measurement was performed by means of the Moisture Management Tester (MMT290) – innovative instrument manufactured by the SDL Atlas. Obtained results showed that the transfer of sweat in liquid form occurs only in the inner, next to skin layer of the multilayer sets for the FPC.

The Circular Bioeconomy (CBE) combines the concepts of bioeconomy and circular economy. As an alternative concept to the current fossil-based, linear economy, it de-scribes an economy based on the efficient valorization of biomass. It is regional in nature and aims to improve sustainability. An analysis of the transition process, by identifying its success criteria and assessing its impacts through the modelling of technology-specific scenarios is necessary to ensure that CBE concepts are sustainable. However, a compre-hensive consideration of regional influences on both is lacking. Based on extensive literature research and an expert survey, we (i) present a compre-hensive catalog of CBE success criteria and discuss their region-specific character and (ii) develop a methodology based on evaluation matrices that enable to match CBE technolo-gies with regions. The matrices support the evaluation of technological and regional characteristics influencing the successful CBE implementation. The results show that the success criteria "biomass resources", "technological", and "social" are perceived as highly important, and that most of the success criteria are both region- and technology-specific, highlighting the relevance of developing matrices to match them. We describe such matrices indicatively for the two broadest and most im-portant success criteria clusters “social acceptance” and “biomass supply chain”. With this, we substantiate the regional nature of CBE and raise the awareness on the importance of considering regional conditions in CBE transition processes. Furthermore, we provide practical guidance on how regional conditions can be reflected in the selection of technologies, e.g. in regional CBE technology scenarios.

Shape memory alloys (SMA) are becoming a more important factor in actuation technology. Due to their unique features, they bring the potential to safe weight, installation space and reduce energy consumption. The system integration of the generally small diameter NiTi wires is an important cornerstone for the emerging technology. Crimping, a common method for the mechanical and electrical connection of SMA wires, has several drawbacks when it comes to miniaturization and high force outputs. For high force applications for example, multiple SMA wires in parallel are needed to keep actuation frequencies high, while scaling up the actuation force. To meet these challenges, the proposed study deals with the development of a resistance welding process for manufacturing NiTi wire bundles. The wires are welded to sheet metal substrate, resulting in promising functional properties and high joint strengths. The welding process benefits from low cost, easy to control parameters and good automation potential. A method for evaluating the resistance welding process parameters is presented. With these parameters in place, a manufacturing process for bundled wire actuators is discussed and implemented. The welded joints are examined by peel tests, microscopy, and fatigue experiments. The performance of the manufactured bundle actuators is demonstrated by comparison to a single wire with the same accumulated cross-sectional area.

Eddy current sensors can be used to test the characteristics and measure the parameters of the conductive samples. As the main obstacle of the multi-frequency eddy current sensor, the lift-off distance affects the effectiveness and accuracy of the measurement. In this paper, a material-independent algorithm has been proposed for the restoration of the lift-off distance when using the multi-frequency eddy current sensor, which is based on the approximation under the thin-skin effect. Experiment testing on the performance of the proposed method is presented. Results show that from the dual-frequency inductance, the lift-off distance could be restored with a maximum error of 0.24 mm for the distance up to 12 mm. Besides, the derived lift-off distance is used for the inversion of the magnetic permeability. Based on a lift-off insensitive inductance (LII) feature, the magnetic permeability of steels can be inversed in an iterative manner, with an error of less than 0.6 % for the lift-off distance up to 12 mm.

Electronic waste generation has been following a continuously rising trend. With electronics containing a myriad of materials some of which are hazardous, toxic, extremely rare or precious combined with more stringent legislative laws which encourage the reuse and optimised recycling of the materials included in e-waste, the need for a holistic approach is inevitable. Such an approach should not only identify the materials found in the various types of e-waste and their respective quantities but also needs to highlight the possible handling techniques and their respective impacts and associated hazards whether to the environment or human health. Performing such a task manually would be exasperating and costly while requiring extensive resources which might not be met with a justifiable economic gain; thus, the use of the advancement in computational sustainability to draw a complete picture and aid in an informed decision-making process is crucial. The e-waste ontology developed in this paper is one way of addressing the problem since it covers the treatment domain, the hazard and the materials contained within the different types of e-waste. The ontology developed can be used directly from the protégé software or by embedding it into a developed Decision Support System.

The accumulation of brown algae from the genus Sargassum has been increasing over the years in coastal regions of the Caribbean, Africa, Brazil, and Mexico. This causes harmful effects to the ecosystem, health, economy, and climate due to gas emissions from its decomposition process. There is the possibility of this biomass being reused in civil construction, and few studies have been carried out on its application to common Portland cement mortar. As such, the objective of this study is to evaluate the potential of sargassum ash as a mineral addition to partial replacement of fine aggregates in Portland cement mortar. Characterizations of the raw materials were carried out through X-ray fluorescence spectroscopy, loss on ignition, particle size distribution, Brunauer–Emmett–Teller (BET), real density, X-ray diffraction, scanning electron microscopy, and dispersion spectroscopy of electrons. The mortars were prepared by partially replacing the fine aggregate (sand) with sargassum ash, at 0%, 5%, 10% and 20%. Mortar performance was evaluated through water absorption, apparent porosity, apparent specific mass, compressive strength after 7, 28, and 63 days after curing. Lastly, a life cycle assessment in accordance with ISO standards 14040:2006 and 14044:2006. The results showed that replacing sand with sargassum ash increases water absorption, apparent porosity, and decreases the apparent specific mass and compressive strength as replacement increases. Nevertheless, the compressive strength results after 63 days, for 5 and 10% replacement did not differ statistically from reference values. The life cycle assessment indicates that mortars with partial replacement of sand by sargassum ash showed positive environmental impacts when compared to reference values for most categories regardless of the scenario analyzed, especially for mortar with 10% replacement. As such, the use of sargassum ash at 10% does not alter compressive strength values after 63 days while reducing its environmental impact. The application of this biomass in civil construction materials provides a destination for this algae that has been causing several social, environmental, and economic problems.

Hybrid reinforcement in a composite material (CM), in many situations, allows better govern material mechanical properties. Polymer matrix CM plate is reinforced with small particles and macro-fibers. Particles are oil shale ash (OSA) powder, macro-fibers – basalt fiber threads im-pregnated by matrix material. With the goal to find out elastic properties of the matrix- polymer with OSA, samples with its different concentrations were experimentally fabricated and their elastic properties were experimentally measured. Obtained data were used in numerical model-ling. Was observed polymer matrix composite slab, reinforced with OSA and three-dimensional (3D) basalt fiber fabric. Fabric are forming threads impregnated by matrix (polymer resin mixed with OSA particles). Damage accumulation in the stretched slab was modelled. Impregnated thread, in the modelling, is observed as a macro-fiber (MF) with averaged elastic properties. With the load increase MF in the material began to break. At first, appeared isolated single breaks. A probabilistic sequential MF rupture accumulation model was accepted and numerical-ly realized. The geometry of the reinforcing knitted fabric was modeled using the Leaf and Glaskin approach. In the knitted fabric highly, stressed MF cross-sections are observed as po-tential location where thread breakage can occur. If one thread breaks, the cross-sections of the adjacent threads experience the overload caused by this rupture. More overloaded crossection in the adjacent overloaded thread breaks and we obtain two adjacent broken MF designated as a defect with the size j=2. The probabilities of obtaining defect consisting of at least 2, 3, … j adjacent broken MF in the plate were calculated. The calculations continued until the rupture process becomes unstable (j→∞). The overstresses on adjacent threads in the CM were calculat-ed using the FEM three-dimensional numerical approach. Analytical and stochastic methods were used for the load-carrying capacity determination and different size defects accumulation in the hybrid composite material (HCM) plate. Also, was calculated the probability of the plate rupture.

The increasing environmental awareness and carbon-storing capability of wood have amplified its relevance as a building material. The demand for high-quality wood species necessitates exploring alternative, underutilized wood sources due to limited forest areas and premium wood volume. Consequently, the veneer-based industry is considering lower-value hardwood species like grey alder, black alder, and aspen as substitutes for high-quality birch. Initially less appealing due to their lower density and mechanical properties, these species show promise through densification, which enhances their density, strength, and hardness. This study aims to enhance plywood screw withdrawal capacity and surface hardness by densifying low-density wood species and using them in plywood face veneer layers or all layers. The relationship between wood density, surface hardness, and screw withdrawal capacity of plywoods made of low-value species like aspen and black alder is examined. Experimental work with a pilot-scale veneer and plywood production line demonstrates improved surface hardness (65% and 93% for aspen and black alder, respectively) and screw withdrawal capacity (16% and 35% for aspen and black alder, respectively) in face veneer densified low-value hardwood plywood. This research highlights the potential of densified low-value wood species to meet construction requirements, expanding their practical applications.

There have been beaching events of the marine alga pelagic sargassum in coastal regions of the Caribbean Sea, West African countries, and the north-northeast region of Brazil since 2011. Its presence has caused environmental and socioeconomic impacts while several studies were conducted in order to understand the causes of this phenomenon, as well as alternatives to mitigate its impacts. The objective of this research was to evaluate pelagic sargassum biomass as a raw material for the manufacture of medium-density multilayer particleboards. These are composed of 30% sargassum particles in their inner layer and 70% sugarcane bagasse particles on their outer layers which are bonded with castor oil-based polyurethane resin. A physical and chemical characterization was carried out in order to evaluate sargassum particles while physical and mechanical tests were carried out in order to evaluate the panels. Results were subsequently compared with indications from NBR 14810-2:2018 and ISO 16893:2016 standards. A life cycle assessment based on ISO 14040:2006 and 14044:2006 was carried out as to complement the feasibility study of these panels and to compare their different manufacturing processes. The multilayer panels met the minimum requirements for physical and mechanical properties established by regulations, indicating that the Sargassum spp. biomass can be used as filling. The life cycle assessment study indicates that sargassum panels produced in the Belém-PA-Brazil region present lower environmental impacts in four of seven evaluated categories when compared to conventional panels. As such, they constitute an alternative way to mitigate environmental impacts generated by beaching events.

The raw material purchasing (RMP) problem is to determine the purchasing quantities of raw materials in given periods or cycles. Raw material purchasing optimization is crucial for large-scale steel plants because it is closely related to the supply of raw materials and cost savings. The raw material purchasing of large-scale steel enterprises is characterized by many varieties, large quantities, and high costs. The RMP objective is to minimize the total purchasing cost consisting of the price of raw materials, purchasing set-up costs, and inventory costs and meet product demand. We present a mixed integer linear programming (MILP) model and a column generation (CG) solution for the resulting optimization problem. The column generation algorithm is the generalization of the branch & bound algorithm with solving the linear programming (LP) relaxation of MILP using column generation (CG), and its advantage is to handle large-sized MILPs. Experimental results show the effectiveness and efficiency of the solution.

Biosolids from stabilized sludge presents a high fertilization potential due to its rich content of nutrients and organic matter. Three formulas of organo-mineral fertilizers based on biosolids were manufactured having at least 2 % N, 2 % P2O5, and 2 % K2O and characterized by classical and advanced methods. The content of N and P in the final formula was measured using specific reactants combined with VIS-nearIR spectroscopy. Additionally, all three formulas were characterized by advanced 1H NMR relaxometry, double-quantum and FT-IR spectroscopy. Structural characterization was performed using SEM, EDX and X-ray diffraction. Four dynamical components were identified in the T2-distribution showing that the rigid component is into a percentage larger than 90 %. In order to evaluate the release properties of organo-mineral fertilizers dynamic measurements of electric conductivity and pH were performed, by placing 0.25 g of formulas (V1, V2 and V3) in 200 ml of distillate water. It was found that V3 present the smallest release velocity, but release the largest amount of fertilizers. Two release mechanisms were also observed.

In this study, the determination of static E50 and υ parameters of rock materials was investigated using P-S wave velocities and Shore hardness (SH), non-destructive measurement methods. We used multiple linear regression (MLR), multiple non-linear regression (MNLR) and artificial neural network (ANN) models to estimate and determine these parameters. When the models defined by MLR, MNLR, and ANN were compared to the R2 values, ANN models that estimate E50 and υ parameters of rock materials using non-destructive methods (Vp, Vs, Vp/Vs, d, and SH) could be determined with higher accuracy than MLR and MNLR models. The study’s originality is based on the fact that ores such as galena, chromite, and barite have been studied for the first time on rock mechanics, and in this respect, it offers an innovative perspective. In addition, the use of all non-destructive measurement methods, Vp, Vs, and Shore hardness tests, also increases the originality of the study.

Glass and ceramics have a fundamental and crucial role in our lives due to their properties and aesthetic decoration. However, they create serious environmental problems, mainly due to their high occupation of landfills and harmful emissions. Both wastes could be utilized to reduce the natural resources' adverse environmental effects and exhaustion. With increasing environmental concerns to reduce solid waste as much as possible, the concrete industry has adopted several methods to achieve this goal. Hence this study examines the performance of self-compacted concrete (SCC) utilizing various percentages of recycled waste materials such as those deposited from glass and ceramic industries. The idea of utilizing recycled waste materials in concrete manufacturing has gained massive attention due to their impressive results in rheological and mechanical state. Recycled glass (RG) and ceramic waste powder (CWP) were utilized to replace fine aggregate and cement, respectively. Five mixes were designed, including the control mix, and the other four mixes with different dosages of RG and CWP as fine aggregate and cement replacement ranging between 5 to 25%. Mixes were tested for both rheological and mechanical properties to evaluate their compilment with SCC requirements as per codes and guidelines. The results revealed that 20%CWP or less as cement replacement and 10% or less of RG as fine aggregate replacement would provide suitable rheological properties along with mechanical ones. Utilizing recycled glass and ceramic waste powder provides strength like the mix designed with natural resources, which helps us structure economically and environmentally friendly.

Aiming at the limitations of single-functionality, limited applicability, and complex designs prevalent in current metasurfaces, we propose a terahertz multifunctional and multiband tunable metasurface utilizing a VO2-metal hybrid structure. This metasurface structure comprises a top VO2-metal resonance layer, a middle polyimide dielectric layer, and a gold film reflective layer at the bottom. This metasurface exhibits multifunctionality, operating independently of polarization and incident angle. The varying conductivity states of the VO2 layers, enable the metasurface to achieve various terahertz functionalities, including single-band absorption, broadband THz absorption, and multiband perfect polarization conversion for linear (LP) and circularly polarized (CP) incident waves. Finally, we believe that the functional adaptability of the proposed metasurface expands the repertoire of options available for future terahertz device designs.

In the realm of high-pressure vessel simulation, conventional finite element method (FEM) approaches, as per ASME standards, may inadequately predict the behavior of flat surfaces under elevated temperatures. This study challenges the efficacy of shell-type mesh modeling for high-temperature flat plates, demonstrating that the thermal conditions within such high-pressure vessels can induce thermal instability and buckling, not accounted for by traditional FEM methods recommended by ASME. Through comprehensive analytical investigations, we reveal that traditional shell-type meshing techniques, while suitable for certain applications, fail to capture the intricate thermal stresses and deformation patterns inherent in high-temperature flat plate configurations. Our analysis delineates distinct stability regimes governed by key design parameters—including plate thickness, operating temperature, and geometric dimensions—profoundly impacting the structural integrity of heating plates under thermal loading. By elucidating these stability boundaries, this research provides engineers with critical insights necessary for optimizing the design and performance of high-temperature equipment. This includes the design of high-pressure vessels with flat surfaces for heating materials, flanges in high-temperature environments, and fins in heat exchangers across various industries such as oil and gas, pyrolysis, and power plants. The findings presented herein serve as a valuable reference for engineers seeking to comprehend and mitigate instability phenomena in solid mechanics, offering practical guidance for developing robust and reliable high-temperature structures in demanding industrial environments.

The imperative to achieve carbon neutrality has driven significant advancements in the construction sector, particularly in the production and utilization of building materials. This paper explores innovative strategies and practices designed to reduce the carbon footprint of construction materials, with a focus on both the production processes and the application of sustainable materials. Key innovations include the development of low-carbon and carbon-negative materials, the integration of renewable energy sources in production, and the implementation of advanced recycling technologies. Case studies of successful projects demonstrate how these strategies can be applied in real-world scenarios, highlighting both the benefits and challenges encountered. The analysis also delves into the technical and economic aspects of these innovations, addressing the barriers to their widespread adoption and proposing solutions to overcome these challenges. Through a comprehensive examination of current practices and future trends, this paper aims to provide a roadmap for the construction industry to achieve carbon neutrality, contributing to broader climate change mitigation efforts and fostering a more sustainable built environment.

This paper investigates the energy dissipation level of a nonlinear vehicle suspension system. The suspension system is modelled as a mass-spring-damper system, which is designed using the output frequency response function (OFRF) method. This method enables the derivation of an explicit relationship, between the system output spectrum (or Performance metric) and the system nonlinear parameters of interest. The OFRF polynomial, of the energy dissipation level, was derived in terms of the nonlinear parameters of interest. The results obtained show that the OFRF model, of the energy dissipation level, could be used to estimate the amount of heat dissipated, for a set of design parameters. This has potentials of providing some insights, in the design of vibration-based energy harvesters, as some of the wasted heat energy could be converted to electrical energy.

In this work, an analog front-end (AFE) circuit for Electrocardiogram (ECG) detection system has been designed, implemented, and investigated in an industry-standard Cadence simulation framework using advanced technology node of 45 nm. The AFE consists of an instrumentation amplifier, a Butterworth band-pass filter (with fifth-order low-pass and second-order high-pass sections), and a second-order notch filter- all are based on two-stage, Miller-compensated operational transconductance amplifiers (OTA). The OTAs have been designed employing the $g_m/I_D$ methodology. Both the pre-layout and post-layout simulation were carried out. The layout consumes an area of 0.0058 mm$^2$ without the resistors and capacitors. Analysis of various simulation results were carried out for the proposed AFE. The circuit demonstrates a post-layout bandwidth of 239 Hz with a variable gain between 44 to 58 dB, a notch depth of -56.4 dB at 50.1 Hz, a total harmonic distortion (THD) of -59.65 dB (less than 1\%), an input referred noise spectral density of $

In the era of Big Data and the Internet of Things (IoT), ensuring the security and privacy of patient data within distributed health systems is paramount. This research delves into the challenges posed by these advancements and explores viable solutions, focusing notably on blockchain technology, data encryption methods, and access control mechanisms. Employing a comprehensive literature review approach, the study synthesizes current research findings, complemented by analyses of existing frameworks and case studies from healthcare organizations, offering practical insights. Interviews with cybersecurity experts and healthcare IT professionals provide nuanced perspectives on current security issues and emerging trends. Through qualitative and quantitative data analyses, the study generates recommendations aimed at enhancing patient data security. These include the adoption of new frameworks and innovative technologies to fortify healthcare data systems. By addressing these critical aspects, this research aims to significantly contribute to the advancement of a more secure and efficient healthcare ecosystem in today's digital landscape.

The work aims to develop an electromagnetic shielding measurement methodology and design an electromagnetic shielding effectiveness test setup for thin sheet material testing. In brief, multiple shielding effectiveness standards are described and analyzed in the thin sheet material testing framework. Two types of the developed shielding effectiveness test probe in high and low-frequency ranges are validated comprehensively. Extensive descriptions and data of developed testing methodology are also reported.

Several types of guided bone regeneration materials are available with various properties and clinical indications. Among them, dentin-derived matrix from extracted teeth is an excellent alternative to traditional graft materials, such as allografts and xenografts. Different clinical preparation protocols exist: block form versus powder form, demineralized versus non-demineralized form. Out of these methods, demineralization protocols for dentin-derived matrix from extracted teeth have been noted for a wide range of successful clinical outcomes. The purpose of this animal study was to find out the most effective method of demineralizing dentin-derived matrix to result in the highest regenerative ability in the bone graft material in rabbit calvaria. The study conducted a comparative histomorphometric analysis of four groups in distinguished matrix conditions: a control group without graft placement, a non-demineralized dentin-derived matrix graft placement group, a 15-minute demineralized dentin-derived matrix graft placement group, and a 30-minute demineralized dentin-derived matrix graft placement group. Regenerative processes were evaluated three times at 2, 4, and 8 weeks post-graft placement. These groups of rabbits were evaluated randomly in a blinded setting to prevent bias. Among the four groups compared, the group with a 15-minute demineralized dentin-derived matrix graft showed the most efficient bone regeneration in the histomorphometric analysis. Based on this animal study, it was apparent that a 15-minute demineralization of dentin-derived matrix is the preferred preparation protocol to maximize the regenerative potential in the matrix.

This research discusses the challenges faced by university students in group work assignments and the importance of effective project management. This article introduces Tasknest, a project management platform that helps teams organize tasks, track progress, and improve communication. This article also reviews related studies on project management applications and discusses the Agile methodology used in the development of Tasknest. The implementation of the task management system was done using Agile methods and Typescript programming language. This web-based system includes a landing page, dashboard page, board page, and settings page. Black box testing was conducted to ensure the system functions as expected, with tests on login, board creation, adding columns and cards, and others. Overall, the system was successfully implemented and tested. Tasknest application development includes user stories, acceptance criteria, sprint backlogs, sprint planning, reviews, and retrospectives. System design analysis includes usecase diagram, activity diagram, sequence diagram, and entity relationship diagram. Application features include task list management, team member management, real-time collaboration, notification system integration, task enhancement, in-task checklists, user authentication, UI optimization, performance improvement, collaboration feature enhancement, database design, front-end implementation, and UI design. The Agile Alliance outlines 12 principles for implementing Agile methodologies, which prioritize customer satisfaction, collaboration, and continuous improvement. Agile methodologies offer high flexibility, rapid iteration, responsiveness to change, improved product quality, stakeholder involvement, transparency, and clear responsibilities. Scrum is a framework that supports Agile principles, with a focus on transparency, inspection, and adaptation. Scrum improves team collaboration, rapid adaptation to change, transparency, visibility, product quality, and team motivation. In the development of the Tasknest application, the Scrum methodology is used, with roles such as Product Owner, Scrum Master, and Development Team. Data collection techniques include interviews, observations, and literature studies, while data testing techniques involve black box testing. Planning using Scrum involves creating a Product Backlog with prioritized features and fixes. Prioritization determines the duration of each sprint.

Cobalt oxide nanoparticles are promising candidates for various kinds of practical application. The interest of researchers and scientists in these nanoparticles is due to their unique physical and chemical properties such as density, melting point, magnetic characteristics and band gap. The need to develop high performance and low-cost technologies for obtaining Co3O4 nanoparticles is a major reason in research in this area. The widespread commercial use of Co3O4 nanoparticles will open doors for numerous novel cost effective technologies, which are mostly dependent on the type of synthesis method and raw materials. A possible solution to this problem is to use Cobalt nitrates as a cost-effective precursor using the solution combustion method. Solution combustion synthesis method is one of the best candidate methods that have the potential for high performance and is also cost-effective. This review examines recent progress in the synthesis of Co3O4 nanoparticles by solution combustion method and underscores their significance across various fields, highlighting the need for further research and exploration of their multifaceted applications. In addition, the most recent advancements in the applications of Co3O4 nanoparticles in sensitive sensing, catalysis, supercapacitors/batteries and water treatment/pollutants removal are reviewed and described, focusing on current trends, challenges, and future outlooks.

Transcranial magnetic stimulation, TMS, has been an innovative method of demure neuromodulation. This paper aims to delve into the different forms of its existence and to evaluate the use of TMS in five psychiatric disorders; Parkinson’s disease, schizophrenia, obsessive-compulsive disorder, major depressive disorder, and major anxiety disorder. Literature pertaining to the use of TMS in treating these specific diseases will be analyzed, and its efficacy and mechanisms will be explored. The literature will be evaluated through sources with established facts and research studies demonstrating function, potency, or inefficacy. TMS poses a method to have a more explicit effect on the regions of the brain, and the exploration of its use in the treatment of psychiatric diseases poses new possibilities in the treatment of psychiatric disorders. Venturing into the options it could have in a sole or combinatorial setting could provide penetrating insight into innovative forms of treatment and research.

The severe acquired respiratory coronavirus–2 (SARS–CoV-2) infection has initiated both acute and chronic COVID–19 disease between 2020 and 2023, currently evolving with other homologous prior coronavirus strains of the Nidoviridae order, which encompasses other prevalent alpha/ beta coronaviruses, but also the Middle East Respiratory Syndrome (MERS-CoV) and SARS-CoV-1, with recent SARS–CoV–2 variants, increasing demands for effective immunogens and therapeutic approaches that will reduce global disease burden and further infection from SARS–CoV-2 affected individuals that may experience post acute sequelae (PASC) or “Long COVID”. Following a worldwide programme of prophylactic vaccination, there is still a dilemma in the efforts to find prophylactic and early therapeutic approaches that would treat novel SARS-CoV-2 variants and prevent future epidemics or pandemics within host human and animal populations, where zoonotic or cross species transfer naturally occurs. Concerns about viral immune escape intersect at a specific point; a gained evolutionary ability of several viruses to co–infect and compete against previous scientific advances since 1796 that remain undetected or asymptomatic during the early stages of infection progressing to symptomatic and severe disease via the double methylation of the 5' end of eukaryotic DNA or RNA-based viral genomes, the 7-MeGpppA2’-O-Me cap, and its double methylation capping process is performed by the activated viral 2’ - O - Methyltransferase (MTase) enzyme, a complex of two viral non-structural proteins (NSPs) joined together through an activation process (NSP10/16) and by N7-Methyltransferase (N7-MTase/NSP14), respectively. Moreover, it was discovered that polymorphic viruses translate NSP1, which prevents the activation of various Pattern Recognition Receptors (PRRs), and consequently, detection of Pathogen-Associated Molecular Patterns (PAMPs) and Damage-Associated Molecular Patterns (DAMPs) alike. NSP1 also silences important interferon-encoding genes (INGs) and interferon-stimulated genes (ISGs), is signalled in a paracrine manner to neighbouring cells, and that induces the apoptosis of host cells, inducing an effect of “trace erase” effect and making the viral infection as immunologically “invisible” as possible during the initial, key stages of viral replication and distribution, all such mechanisms occurring independently of the viruses in cause. Another important viral NSP is NSP14, as it plays two functional roles that are independent of each other; to produce new viral genetic material for the purpose of maintaining the validity of the viral genome as well, and not just transfer a methyl group to the 5’ end of the viral genome. Other viral NSPs share a role with NSP1, 10, 14 and 16 in directly suppressing the activation of PRRs and ISGs, and all such viral proteins help the virus in its process of self-camouflaging against first- and second-line immunity, thereby often severely impacting the quality of the produced adaptive immune responses. The outcome of all such phenomena is the sharp decrease in the host Type I and Type III interferons' (IFNs) rate of synthesis by the host cells, that would usually occur and affect homeostatic cellular pathways, resulting in further viral replication and induced apoptosis. Nonetheless, effects of microbial immune evasion during the development of other viral or carcinogenic pathologies are not widely known. In short, polymorphic viruses developed a proportionate evolutionary response against developed adaptive immune responses, by currently relying on gaps mostly situated in the natural immune system in their process of molecular self-camouflaging. Scientists developed numerous approaches of early treatment that generally showed good success rates and fewer risks of adverse events, and the still early present stages of COVID-19 research should also be taken into consideration whilst filtering for the most appropriate solutions. For example, the administration of recombinant human interferons I and III into the nasal mucosa cellular layer, as key mediators of anti–viral activity, can simulate intracellular infection and stimulate cellular activity in a timely manner, training the innate and adaptive immune system cells to develop and appropriately stimulate an adequate immune response through B and T cells. Another example could involve the treatment of natural and adaptive lymphocytes with a low dose of IFNs I and possibly III, prior to their insertion into the host lymphatic system, possibly alongside additional recruitment of plasmacytoid dendritic cells (pDCs) as further interferon “factories”, all with the purpose of early infection management. It might be that focusing on directly offering the immune system the information about the genetics and protein structure of the pathogen, rather than training its first-line mechanisms to develop faster, excessively increases its specificity, making it reach a level that brings the virus the opportunity to evolve and escape previously-developed host immune mechanisms. It is until the scientific community realises this potentially crucial aspect that large proportions of the world population will probably continue to face serious epidemics and pandemics of respiratory diseases over the coming several decades, evidenced with dengue fever and more recently, monkeypox and possibly avian flu. Of note, it has been indicated that IFN I and / or III display significant immunising, early therapeutic and clinical disease onset-attenuating effects for many other microbial evoked diseases, as well as for a number of oncological diseases.

This article introduces a novel payload structure, which has been experimentally proven to have smaller impact force while the carried internal electronics remains intact. The study describes in details how materials and geometric structures were chosen based on information analysis. It is clarified how possible geometric structures and materials can be chosen to yield optimal efficiency. Finite element method simulations were carried out to investigate the mechanical properties of several geometric structures, which has led to the dodecahedron form. For the frame, Polylactic Acid were chosen as an optimal material. A low air pressure test for parts of the structure, and also the whole structure were carried out with successful results. Drop tests, with force measuring sensors and high speed videos, were carried out for measuring and comparing the maximal impact force of classical payloads and the novel one. Laboratory and real life tests demonstrated that the developed new structure is safer and it is applicable.

In this paper, we first discuss the research status and application progress of the finite element method and the smoothed particle method. By analyzing the advantages of the smoothed particle method and the finite element method, a new coupling algorithm, namely FEM-SPH algorithm, is proposed. By the method of comparison, it shows that finite element method and SPH method in the simulation of large deformation problems each have advantages and disadvantages, the finite element method smoothed particle coupling algorithm is effective to achieve the performance of high computational efficiency and can naturally simulate large deformation problems across. In the process of calculation, the large deformation unit can be freely into an algorithm to facilitate the calculation accuracy and efficiency of three methods of numerical simulation. Through the study found, FEM-SPH algorithm not only overcome the defect of smooth particle tensile instability, but also overcomes the problem of low efficiency of finite element computation. To further test the FEM-SPH algorithm has advantages in the practical engineering, we have carried out the actual test to the example of the super high speed collision, concluded that, since the target of most of the computational domain is always finite element, smoothed particle focused only in contact with the projectile and target of local area, particle number is not much, the whole calculation process just ten minutes, computational efficiency has been greatly improved, at the same time in the simulation of large deformation, the advantage is very obvious .This provides a criterion for the actual project, depending on the specific material deformation mode and choose a more appropriate conversion algorithm.

This qualitative research explores the transformative impact of technological innovations on retail marketing effectiveness. Through thematic analysis of interviews with industry professionals, the study identifies key themes including enhanced customer engagement, personalized marketing strategies driven by AI and machine learning, data-driven decision-making leveraging big data and analytics, the rise of e-commerce platforms, integration of mobile technologies, adoption of augmented reality (AR) and virtual reality (VR), development of omnichannel strategies, and implementation of loyalty programs. These themes illustrate how technology has reshaped retail marketing by enabling real-time customer interactions, personalized shopping experiences, and targeted marketing campaigns that enhance customer satisfaction and loyalty. The findings highlight the critical role of digital platforms like social media in fostering community engagement and brand loyalty. AI and machine learning facilitate personalized marketing efforts, tailoring product recommendations and enhancing customer experiences. Data-driven strategies optimize marketing ROI by providing insights into consumer behavior and market trends. E-commerce platforms expand market reach and streamline transactions, while mobile technologies and AR/VR innovations create immersive shopping experiences that captivate consumers. Omnichannel strategies integrate physical and digital channels, delivering seamless brand experiences and enhancing customer retention through CRM systems and loyalty programs. Looking ahead, retailers must navigate challenges such as rapid technological change, the need for continuous adaptation, and concerns about data privacy. By embracing technological advancements strategically and maintaining ethical standards, retailers can sustain competitive advantage, meet evolving consumer expectations, and drive growth in the digital era.

The Jakarta LARP community, established in March 2020 and primarily active in Gelora Bung Karno, fosters inclusivity, diversity, and physical role-playing activities. It adheres to a policy of excluding ultra-nationalist ideologies and integrates new members despite language barriers. Bruhn (2011) defines this kind of community sharing the same goals, values, and lifestyles, while McMillan & Chavis (1986) outline four aspects of the sense of community.The research discovered that communities endure by utilizing solidarity built on the basis of their peculiarities. This study employed ethnographic methods alongside grounded research to identify the community's culture and their efforts to sustain and utilize it as community solidarity.

Yttria stabilized zirconia (Y-TZP) ceramics with drastically reduced yttria content have been introduced by different manufacturers aiming at improving the damage tolerance of ceramic components. In this study an alumina doped 1.5Y-TZP was axially pressed, pressureless sintered in air at 1250–1400 °C for 2 h and characterized with respect to mechanical properties, microstructure and phase composition. The material exhibits a combination of high strength of 1000 MPa and a high toughness of 8.5–10 MPa√m. The measured fracture toughness is, however, extremely depending on measurement protocol. Direct crack length measurements overestimate toughness due to trapping effects. The initially purely tetragonal material has a high transformability of > 80 %, the transformation behavior is predominantly dilatoric, measured R-curve related toughness increments are in good agreement with transformation toughness increments derived from XRD data.

Nowadays, the growing concern about improving thermal comfort in textiles, asphalt pavements and buildings has stimulated research into phase change materials (PCMs). However, the incorporation of PCMs directly causes mechanical impacts. Therefore, this study herein reported focuses on designing coaxial phase change fibres using commercial cellulose acetate (CA) or recycled CA obtained from cotton fabrics (CAt) as a coating and polyethylene glycol (PEG) 2000 as a core. The phase change fibres (PCF) were produced by wet spinning, varying the parameters: (i) CA concentration, molecular weight and source (virgin versus recycled); and (ii) PEG concentration and ejection. For phase change recycled fibres (PCFt), PEG concentration and ejection were varied. The fibres were assessed for their optical, chemical, thermal and mechanical properties. Bright-field microscopy images and Scanning Electron Microscopy (SEM) micrographs proved the coaxial structure. Fourier Transform Infrared spectroscopy (FTIR) confirmed the presence of PEG in the core. Thermogravimetric Analysis (TGA) proved the ability of PCFs to tolerate high temperatures. Differential Scanning Calorimetry (DSC) attested to the presence of PEG2000 peaks, since their melting points were close to those of virgin PEG2000, with a slight change in the PCFs and PCFts caused by the protective sheath of CA and CAt.

The advent of 5G technology represents a transformative leap in the realms of retail marketing and supply chain operations, offering unprecedented enhancements and posing unique challenges. This study explores the multifaceted impacts of 5G, focusing on its influence on customer experiences, operational efficiency, and supply chain management. The integration of 5G enables advanced technologies such as augmented reality (AR) and virtual reality (VR), significantly enhancing the interactivity and personalization of the shopping experience. Real-time data collection and analysis, facilitated by 5G, allow for more precise inventory management and optimized store operations, leading to improved customer satisfaction and reduced operational costs. In the supply chain domain, 5G technology offers enhanced visibility and control through real-time tracking and environmental monitoring, which improves logistics efficiency and product quality management. Despite these advancements, the adoption of 5G technology involves considerable challenges, including high infrastructure costs, data security concerns, and global disparities in technology deployment. Businesses must navigate these obstacles while leveraging the benefits of 5G to achieve competitive advantage. The study also highlights the role of 5G in integrating with other advanced technologies, such as artificial intelligence (AI) and blockchain, to drive further innovation. Additionally, 5G supports sustainability efforts by optimizing energy use and reducing waste. Overall, the successful implementation of 5G requires strategic investment and adaptability, but it holds the potential to revolutionize retail and supply chain operations, enhancing efficiency, customer engagement, and sustainability in a rapidly evolving digital landscape.

This research explores the impact of 5G technology on supply chain efficiency and marketing innovations, highlighting its transformative potential and associated challenges. The study delves into how 5G enhances real-time tracking and monitoring within supply chains, significantly improving inventory management, reducing stockouts and overstocking, and ensuring optimal conditions during product transit. The advanced communication capabilities of 5G enable seamless collaboration among supply chain partners, facilitating quicker decision-making and improved risk management. Additionally, the integration of 5G technology with data analytics has optimized processes, improved forecasting accuracy, and led to cost reductions, showcasing the value of data-driven decision-making. In the marketing domain, 5G technology has driven the development of immersive augmented reality (AR) and virtual reality (VR) applications, enhancing customer engagement through interactive and experiential content. Personalized and targeted marketing strategies, supported by real-time data and deeper customer insights, have led to higher customer satisfaction and increased sales. The proliferation of connected devices, such as smart speakers and wearables, has further enabled personalized interactions and convenience, fostering brand loyalty and driving growth. Despite these advancements, the implementation of 5G presents challenges, including significant infrastructure investment, cybersecurity risks, and privacy concerns. Companies must navigate these issues by investing in robust security measures and developing comprehensive policies. The research concludes with an optimistic outlook on the future impact of 5G technology, emphasizing its potential to drive innovation, enhance operational efficiency, and transform customer experiences, ultimately shaping the future of business operations.

This research explores the pivotal role of big data analytics in enhancing retail marketing and supply chain optimization. As the retail industry undergoes rapid digital transformation, big data analytics has emerged as a critical tool for gaining competitive advantage and improving operational efficiency. The study delves into the various applications of big data analytics, including customer segmentation, personalized marketing, demand forecasting, inventory management, dynamic pricing, and supply chain optimization. It highlights how retailers leverage data from diverse sources to gain insights into consumer behavior, market trends, and operational performance, leading to more informed decision-making. The findings underscore the significant benefits of big data analytics in enhancing customer experiences through targeted engagement and personalized service. Additionally, the research addresses the ethical considerations and challenges associated with data privacy, security, and potential biases in analytics models. It emphasizes the importance of maintaining high standards of data quality and ethical practices to ensure the responsible use of data. The conclusion reiterates the transformative impact of big data analytics in the retail sector, suggesting that while it offers substantial advantages, careful management of its challenges is crucial. The study provides valuable insights into how retailers can harness the power of big data analytics to drive growth, innovation, and long-term success in an increasingly competitive and data-driven market environment.

The study of the tribological behavior of the braking system in auto vehicles requires knowing the characteristics of the material in contact and, in the work process, for the friction pair, brake disc-pads. Materials structural analysis is necessary because the wear process depends on the friction pair chemical composition, and brake disk-pads, respectively on the work process parameters (pressing force, rotational speed, traffic conditions, etc.). The material of the brake discs is generally the same gray cast iron, but the brake pads can be semi-metallic (particles of steel, copper, brass, and graphite, all united with a special resin), organic materials (particles of rubber, glass, and kevlar all joined with the help of a resin), composite materials that contain different constituents and ceramic materials (rarely have small copper particles). Therefore, the purpose of the paper is to know the crystalline structure and the mechanical properties of the brake pad materials, through specific studies and analyses, with important implications on the friction and wear behavior.

Presence detection is essential in many applications, including smart homes, office automation, and public space management. Traditional technologies like infrared sensors and cameras frequently encounter obstacles due to privacy concerns, high costs, and complexity. The study provides a novel way to detect presence based on Wi-Fi signals and machine learning algorithms, utilizing the ESP8266 microcontroller. The suggested system attempts to reliably detect the presence of people in a given place by evaluating fluctuations in Wi-Fi signal strength and patterns. The theoretical basis of this strategy is investigated, including the ESP8266’s capabilities for Wi-Fi data gathering and the use of machine learning methods for data analysis. The methodology includes data collecting with the ESP8266, preprocessing, feature extraction, and training and evaluating machine learning models. This system’s potential uses include smart home automation, office occupancy tracking, and crowd management in public settings. The paper also discusses potential issues such as signal interference, data privacy concerns, and the limitations of Wi-Fi detection. Future work is also mentioned, including the suggested system’s installation and testing and enhancement proposals to improve accuracy and scalability. This research aims to provide a cost-effective, non-intrusive, and scalable presence detection system by harnessing the power of Wi-Fi signals and machine learning, enhancing intelligent environments

Background: Population studies have shown that prehypertension is associated with adverse cardiometabolic risk profile even among apparently healthy populations. Although associations between serum triglyceride (TG) concentrations and the risk of atherosclerotic cardiovascular disease have been reported, there are lack of data on the association of hypertriglyceridemia with cardiovascular risk (CVR) in a low risk prehypertensive population. Aim: Our aim was to analyze the cardiorenometabolic characteristics of prehypertensives (PHT) compared to normotensives (NT) and untreated hypertensives (HT) and its associations with CVR. Materials and methods: In our cross-sectional study we included 323 apparently healthy untreated subjects 18-45 years who underwent basic anthropometric and standardized blood pressure measurement, fasting blood sampling, spot urine collection and transthoracic echocardiogram. Results: Higher BMI, waist circumference, HOMA-IR, LDL-cholesterol, TG, uric acid and LVMI contribute to higher CVR in PHT compared to true NT (p

Yttria stabilized zirconia materials are frequently used in mechanical engineering and biomedical applications. Demanding loading conditions require materials combining a high level of strength and fracture toughness. A ready to press alumina doped 2 mol% yttria stabilized zirconia powder was shaped by axial pressing and sintering in air at 1250 - 1500 °C for 2 h. The best combination of strength and toughness value of 7.8 MPa√m. Materials sintered in the middle of the chosen temperature range combine fully density, high transformability and small grain size. Toughness measurements by direct crack length measurements delivered unrealistically high fracture toughness values.

Additive manufacturing (AM) has revolutionized the field of biopolymers by providing a range of opportunities to create complex and intricate structures. Here we provide an overview of developments in biopolymer AM, first in the context of how natural systems have impacted the synthetic processes of AM, and secondly in the context of how synthetically derived structures can be used for biomedical applications. In particular, we explore the range of biopolymers developed for AM, AM techniques for biopolymers, and potential biocompatible medical applications with a focus on four categories of tissue in the human body: skin, bone, heart, and nerve. Despite the current challenges of the technology, exciting results in tissue regeneration, synthetic replacements for natural grafts, and complex dynamic organoids have already come to pass - with many more possible in the future.

In this article, we present two topics related to mathematical economics. We offer an intriguing proposal for securing cost and production functions in the face of uncertainty and risk. We discuss the relationship between individual and social preferences. This is important because traditional revealed preference theory does not account for such factors.

Adult neurogenesis involves generation of functional neurons from neural progenitor cells, which have the potential to complement and restore damaged neurons and neural circuits. Therefore, the development of drugs that stimulate neurogenesis represents a promising strategy in stem cell therapy and neural regeneration, greatly facilitating the reconstruction of neural circuits in cases of neurodegeneration and brain injury. Our study reveals that compound A5, previously designed and synthesized by our team, exhibits remarkable neuritogenic activities, effectively inducing neurogenesis in neural stem/progenitor cells (NSPCs). Subsequently, transcriptome analysis using high-throughput Illumina RNA-seq technology was performed to further elucidate the underlying molecular mechanisms by which compound A5 promotes neurogenesis. Notably, comparative transcriptome analysis showed that the up-regulated genes were mainly associated with neurogenesis and the down-regulated genes were mainly concerned with cell cycle progression. Furthermore, we confirmed that compound A5 significantly affected the expression of transcription factors related to neurogenesis and cell cycle regulatory proteins. Collectively, these findings identify a new compound with neurogenic activity and may provide insights into drug discovery for neural repair and regeneration.

We aimed to investigate the relationship between membrane material and development of membrane fouling in a membrane bioreactor (MBR) using membranes with different pore sizes and hydrophilicities. Batch filtration tests were performed using submerged single hollow fiber membrane ultrafiltration (UF) modules with different polymeric membrane materials including cellulose acetate (CA), polyethersulfone (PES), and polyvinylidene fluoride (PVDF) with activated sludge taken from a municipal wastewater treatment plant. The three UF hollow fiber membranes were prepared by a non-solvent-induced phase separation method and had similar water permeabilities and pore sizes. The results revealed that transmembrane pressure (TMP) increased more sharply for the hydrophobic PVDF membrane than for the hydrophilic CA membrane in batch filtration tests, even when membranes with similar permeabilities and pore sizes were used. PVDF hollow fiber membranes with smaller pores had greater fouling propensity than those with larger pores. In contrast, CA hollow fiber membranes showed good mitigation of membrane fouling regardless of pore size. The results obtained in this study suggest that the surface hydrophilicity and pore size of UF membranes clearly affect the fouling properties in MBR operation when using activated sludge.

In this paper, we propose an assumption of which the relation between electron and phonon is discussed and investigated based on the experiment of γ photon and electric interconverting with each other. We calculated the charge of a particular standing wave topology with Maxwell’s equation rotated in accordance space with the SO3 transformation. The derived charge value is 1.6035 × 10E−19C around 0.0826% different from the experimental data, indicating the proposal is a promising theory to explain the origin of charge and spin of electron particle. Electron spin angular momentum comes from the orbital angular momentum of photon rotation (electromagnetic field rotation), and electron charge comes from photon, that is, the space-time rotation effect of electromagnetic wave.

Traditional painting artefacts study and documentation face the limitations of well-known recording tools and methods, such as handwritten or digital descriptions, scaled 2D drawings in situ, measurements with calipers, rulers or tape measures, sketches, tracings, as well as conventional or technical photographs. This paper advocates Close-Range Photogrammetry (SfM-MVS) and Reflectance Transformation Imaging (RTI) for recording vital morphological and 2.5D geometric features of painted surfaces with high accuracy. These digital tools, widely accessible due to increased computing power, enhance art observation, material study and conservation assessment. Despite specialized alternatives like 3D laser scanners, the focus here is on the cost-effective SfM-MVS and RTI, which offer advanced pixel colour accuracy. The ability to reproduce photorealistic textures proves essential for accurate documentation of painted artefacts. The paper showcases promising results from applying these methods to a mural from the Palace of Tiryns, justifying their fundamental role in an integrated scientific art study methodology.

The decarbonization of the built environment, both in new construction and renovation, is crucial to mitigate its relevant impact on climate change and achieve the Paris agreement goals. This study presents a systematic LCA-based methodology to assess the whole life carbon emissions of buildings, applied to a proposal for the regeneration of one of Milan’s disused railway yards. As an entry for the 2020 Reinventing Cities competition, Scalo Lambrate is a project for a mainly residential neighborhood with a public park. Strategies to reduce carbon emissions deriving both from the operational energy and construction and maintenance were evaluated and their effects compared to a reference scenario over a time horizon of 100 years. The results show that, while the opportunities to reduce carbon emissions during the use phase are somehow limited due to the already stringent performance requirements for new builds, the use of fast-growing biogenic materials for construction materials, even if mixed with more traditional ones, can provide a significant reduction of the global warming potential over the whole life cycle, with a reduction of 70% over the baseline. The remaining emissions can be offset with afforestation initiatives that, however, must be assessed against land use issues.

Weathering and erosion transport minerals and organics toward the sea or lake bottoms over geologic time. The finest solids are deposited in lower, less turbulent areas, such as lake bottoms and continental shelves. They sometimes stack up to thicknesses of kilometers, and begin compacting. These sediment sections are called shales, and as initially deposited in water, shales can have porosities up to 50-80{\%} water, As they are buried, many alteration products from oil to slate are produced due to overburden and temperature increasess, making them important to study. A preceeding paper \cite{1} showed that pressure solution is the primary mechanism for porosity reduction, with possible mechanical compaction at shallow depths. Without naming the mineral(s) involved, it postulated that the greater the product of the water and pore interfaces, the faster the reaction would proceed. This term is $ \varphi^{4m/3}(1-\varphi)^{4n/3}$ , where $\varphi$ is porosity and m and n are numbers close to unity. The large exponents, {\em 4/3}, recognize that the reaction occurs at the molecular scale at which the surfaces are rough. A second term, $\exp^{(-E/RT)}$ , indicates that the reaction is impeded by a quantum energy barrier, E, with diminished impeding power as increased available thermal energy, represented by the absolute temperature, T, becomes available at greater depths in the Earth. These two factors combine to allow porosity $\varphi$ to reduce with time, or equivalently for the fraction of solids, $(1-\varphi)$, to increase with time,$\left. \frac{\partial(ln(1-\varphi) ) }{\partial t } \right |_{\sigma} = (\varphi )^{4m/3}( 1-\varphi )^{4n/3}Ae^{-E/(RT)}$. { \em Here it is shown that this equation can cover quantitatively any actual deposition rates which may have been experienced by the six sections studied, the actual deposition rates being unknown for these cases. Hence a time-depth depositional history for any new shale section, known in detail, would allow determination of the parameters m, n, E and a lumped proportionality constant A. This was accomplished by showing that, for a wide range of depositional rates, r, the range of E for any of the studied sections is small compared to laboratory measurements of quartz solution\cite{2}, 24+-15kJ/mol. Results were obtained over this range of r's using the previously determined m and n, and porosity and temperature profiles. The presently existing porosity profiles necessarily incorporate any overpressure or underpressure conditions that may have existed in the past or currently, as the net difference between overburden and pore pressure is a primary driving force for pressure solution. $SiO_2$ usually comprises 20-50{\%} of shales. In conclusion, pressure solution of quartz can account for vertical compaction of shales quantitatively in the studied examples. Separately, a quasi-eqivalent method for discussing reduced porosities in Macron 2 versus Macron 1 as increased vertical stress, rather than additional horizontal stress, is illustrated. Experiments are suggested to clarify the pressure solution mechanism. The role of horizontal forces is discussed. From a global point of view, shale compaction by pressure solution is a quantified step in the cycling of continental rocks, beginning with rifting.

Background and aims: Brain metastases are prevalent in the late stages of malignant melanoma. Multimodal therapy remains challenging. Patient-derived organoids (PDOs) represent a valuable pre-clinical model, faithfully recapitulating key aspects of the original tumor, including the heterogeneity and the mutational status. This study aimed to establish PDOs from melanoma brain metastases (MBM-PDOs) and to test the feasibility of using them as a model for in vitro targeted-therapy drug testing.Methods: Surgical resection samples from eight patients with melanoma brain metastases were used to establish MBM-PDOs. Samples were enzymatically dissociated followed by seeding into low-attachment plates to generate floating organoids. The MBM-PDOs were characterized genetically, histologically, immunohistologically and compared with the parental tissue. The MBM-PDO cultures were exposed to dabrafenib (BRAF inhibitor) and trametinib (MEK inhibitor) followed by cell viability assessment.Results: Seven out of eight cases were successfully cultivated, maintaining the histological, immunhistological phenotype, and the mutational status of the parental tumors. Five out of seven cases harbored BRAF V600E mutations and were responsive to BRAF and MEK inhibitors in vitro. Two out of seven cases were BRAF wild type, one case harboring an NRAS mutation and the other harboring a KIT mutation, and both were resistant to BRAF and MEK inhibitor therapy. Conclusion:We successfully established PDOs from melanoma brain metastases surgical specimens, which exhibited a consistent histological and mutational profile with the parental tissue. Using FDA-approved BRAF and MEK inhibitors, our data demonstrates the feasibility of employing MBM-PDOs for targeted-therapy in vitro testing.

This article is some review of results that were obtained at 2007-2021 years development of “The Information as Absolute” concept and the informational physical model, which is based on the concept; including a number of fundamental physical problems are briefly considered in framework of the conception and the model. Recently in physics there are several publications, that present lists of the problems. However, those lists are essentially incomplete, for at least two reasons. Firsts of all, a number of phenomena are studied traditionally by philosophy, and so corresponding problems are usually considered to be “metaphysical”. However, they relate also to some concrete physical phenomena. For example, physics evidently studies Matter, and so the metaphysical problems “what is ontology of Matter”, “what is “Space”, “Time” and a few other physical phenomena and notions as well, are really a Meta-physical problems “what does physics study?” There are other fundamental physical problems, which are not considered as such in physics, and are absent in the “fundamental problems lists”. Those include the problems, which really exist, yet are incorporated into standard physical theories, and so are fundamental “implicitly”, which in physics are “solved by default” ‒ and mostly erroneously. Note, though, that a number of “Meta-physical”, and concrete fundamental, problems more in detail are considered in the paper “The Informational Conception and Basic Physics”, https://arxiv.org/abs/0707.4657, v5 (2021), so this paper is, in certain sense, an expanded conclusion of this paper, which includes, correspondingly, more in detail consideration of some more general physical problems; and, besides, in this article, the problem “what are Gravity and Electric Forces” is essentially clarified comparing with the arXiv 2021 paper version above, and additionally initial model of Nuclear Force is presented. Besides, the concrete problem “What is Life”, and the rational cosmological model, where a few vague points in standard cosmology rather probably are rationally clarified, while the fundamental problem “matter – antimatter asymmetry” in Matter is solved with rather large probability, are considered, and one of recently published rather complete “lists of fundamental problems” is commented in Appendix.

The inherited ‘EIA’ process at Brexit is based on a ‘Project’ period from Inception tothe start of construction works. The ‘Incompleteness’ of the process covers andidentifies stages that will impact on the environmental cycle: construction period,operational life, de-commissioning and a return to acceptable environmental footprint.A master environment structure-plan framework is required to commence with theupgrading of the complete ‘EIA’ process, embracing separate limbs for the UK’spriority environmental targets for climate change, and other major adverse effectswhich result in serious ‘harm’ to the UK environment. The identification of the processfor ‘incompleteness’ requires effective sustainability, and inclusion of effectivemanagement tools, for the essential ‘monitoring/control/recording’ proceduresthroughout the project life and the natural environmental cycle. This will allow theopportunity for a new approach to a structured ‘Suite of EIAR Directives’, to enable a‘EIAR’ regime that ‘will remain fit and proper for UK purpose’.

Wearable antennas are increasingly vital in modern healthcare, facilitating continuous monitoring and communication for medical purposes. These antennas are integrated into wearable devices, allowing for the transmission and reception of vital health data, such as heart rate, body temperature, and blood pressure, to medical professionals or monitoring systems in real time. This instantaneous data transmission enables timely interventions, thus improving the quality of healthcare services. This review aims to comprehensively synthesize recent research from reputable databases, focusing on the functionality and effectiveness of wearable antennas in medical applications. The primary objectives of each study were categorized, including antenna design and integration, the performance of medical wearable antenna technology, safety considerations in wearable antenna biomedicine, and the use of antennas in clinical applications and their impact. This synthesis provides valuable insights for researchers and practitioners aiming to develop and deploy wearable antennas in medical settings, ultimately enhancing healthcare delivery and patient outcomes.

This article argues that philosophy and its influential narrative should take and think "food" - the gastro-world - in order to radically renew itself and develop a gastrocentric view of the world and the future of humanity. It discusses first some of the basic ideas of a gastrocentric understanding of the world, second the adventure of becoming a Terran, and third the daily practice of what I will call "terra madre forming". It tells us this: If there is to be a future of human survival and well-being on Earth, if we are to achieve the goals of sustainable development, then we have a clear agenda for tomorrow with the re-humidification of the soil - madre terra - that nourishes us. What needs to be done is quite simple and down-to-earth: We, each of us, if possible, must participate in the regeneration of the earth. In conclusion, it is time for the Slow Food movement to blossom into a geo-gastro-activism. The future task of this organization is to make itself electable as a political party to support the much-needed transformation of humans into Terrans.

A low-cost bio-mass-derived carbon substrate has been employed to synthesize MoS₂@carbon composites through a hydrothermal method. Carbon fibers derived from natural cotton provide a three-dimensional and open framework for the uniform growth of MoS₂ nanosheets, thus constructing hierarchically coaxial architecture. The unique structure could synergistically benefit fast Li-ion and electron transport from the conductive carbon scaffold and porous MoS₂ nanostructures. As a result, the MoS₂@carbon composites, when served as anodes for Li-ion batteries, exhibit a high reversible specific capacity of 820 mAh g^-1, high-rate capability (457 mAh g^-1 at 2 A g^-1), and excellent cycling stability. The superior electrochemical performance makes the MoS₂@carbon composites to be low-cost and promising anode materials for Li-ion batteries.

Kamchatka berries (Lonicera caerulea L.) are known for their high content of phenolic compounds or vitamins, which is reflected in their antibacterial, detoxifying and anti-inflammatory properties. They are used in the production of jams, juices, wines and as natural dye. A bioferment was prepared from the pomace of the Kamchatka berry varieties Aurora and Indigo Gem and the strains Saccharomyces cerevisiae and Lacticaseibacillus paracasei, which was used to prepare a cosmetic preparation with a concentration of 5% in accordance with the guidelines of the COSMOS certification body. Conducted physico-chemical and organoleptic analyses and bioactive profile characterisation (UHPLC-DAD and UHPLC-ESI-MS/MS). The results showed that the presence of caffeic acid 4.47 ± 0.07 mg/100g was detected after fermentation of Kamchatka berry pomace. Vitamin C content increased by 141% after fermentation of Kamchatka berry pomace. The results of stability tests showed that in the process of physicochemical analysis of cosmetic preparation with bioferment of Kamchatka berry pomace the pH should oscillate in the range of 4.38-4.76 ± 0.01. Stability tests showed that the cosmetic should be protected from high temperatures and UV radiation and proved that the product is stable under changing conditions, resulting in lower transport and storage costs.

This study investigates the pivotal areas where Artificial Intelligence (AI) integration in healthcare warrants further exploration, leveraging insights from Boston Specialists, a forefront healthcare provider in AI adoption. Employing a qualitative case study approach, enriched by in-depth interviews and comprehensive literature reviews, we identify three main domains for potential AI expansion: scheduling efficiency, clinical documentation, and AI-driven medical research. Our results underscore the substantial enhancements AI brings to operational workflows and patient care, notably through improved scheduling systems, accuracy in medical documentation, and the facilitation of data-driven research methodologies. These findings suggest a critical need for healthcare institutions to further invest in AI technologies, focusing on these key areas to harness AI's full potential in personalizing care, optimizing efficiency, and advancing medical knowledge. The study concludes with a call for continued investigation into AI's integration within healthcare settings, emphasizing the importance of a supportive organizational infrastructure, ethical considerations, and data security in realizing AI's transformative impact on healthcare delivery and patient outcomes.

In this paper we investigate some properties of square-free numbers. In particular, we study a function that counts the number of square-free numbers no larger than the given number n. We show that this function has asymptotics consistent with the predictions of the Riemann hypothesis and use this to obtain new and better estimates of the density of square-free numbers. Finally, we present a well-known generalization of the concept of a square-free number to monoids and research on square-free factorizations.

In this article, we present solutions for one of the oldest mathematical problems, the Collatz Conjecture, and provide a proof for the Riemann Hypothesis, utilizing a new number theory based on newly discovered number properties, which will also be presented in this paper. This is made possible through the Sophy-Peter mathematical framework, built upon this new number theory. The Collatz Conjecture will be disproven, but as an alternative, the Oscillating Theorem will be introduced, with its correctness proven within this article. Furthermore, we present the general version of the Riemann zeta function, developed based on the new number theory. The correctness of this function is verified by comparing it with existing results of the zeta function. Using this approach and the Sophy-Peter framework, we have successfully proven the Riemann Hypothesis, long considered a millennium problem. Moreover, since the general zeta function is proven, this implies the correctness of the new number theory and the Sophy-Peter framework.

Background: Sexual dysfunction is the most common side effect encountered by cervical cancer patients during and after treatment, and rehabilitation strategies are needed to improve their quality of life. A variety of rehabilitation strategies have been reported in previous studies, varying by country, race and even continent. However, the common rehabilitation strategies used by cervical cancer survivors in Tanzania and their outcomes are unknown. The study aimed to unfold sexual rehabilitation strategies and outcome practiced by cervical cancer survivors who experienced sexual dysfunction during and after treatment in North-western Tanzania. Methods: Descriptive qualitative study were employed. Phenomenology study design used with a sample of 7 participants and data corrected via in-depth interview guided by 11 questions. Audiotaped and transcribed to get main themes and sub themes through deductive analysis. Results: Most participants reported inability to achieve an orgasm and low libido and dyspareunia after treatment. Most participants were eagerly to have their sexual activity recovered. However, they were not familiar with any rehabilitation strategy after the experience of sexual dysfunction. Even though, some of the participants attempted various interventions, but all were unsatisfactory leading to a significant decline in sexual interest and activity. Conclusion: Cervical cancer survivors are not familiar with any sexual rehabilitation strategies. Health education concerning various sexual rehabilitation strategies should be provided to survivors during and even after treatment.

Independent Learning Independent Campus (MBKM) is a program to develop an educational ecosystem that is in harmony with learning in higher education and the needs of industry. The limited link and match between universities and the business and industrial world in Indonesia are obstacles in realizing Indonesia as a developed country in the Industrial Revolution 4.0 era. The purpose of this study is to analyze the impact of the Independent Learning Independent Campus (MBKM) program on improving the performance of Ibn Khaldun University Bogor. The method used in this study is descriptive statistics with quantitative analysis. The sample that participated in this study consisted of all active students, lecturers, and administration staff. The research data was obtained through distribution to 6100 students, 233 lecturers, and 150 education staff. The research stages include socializing the understanding of MBKM, filling out the survey, calculating the distribution of respondents' filling, and concluding the assessment category using the weighted mean score (WMS) method. Based on the result, the implementation of MBKM in University of Ibn Khaldun Bogor based on all indicators can conclude that MBKM improve the performance of Ibn Khaldun Bogor University in the good category with an average percentage assessment criteria above 75%

The Cosmic Theory of Structure (CTS) model presents a comprehensive framework that integrates gravitational waves, neutrinos, dark matter, and quantum field interactions. This model aims to provide a unified understanding of the universe's formation and evolution. The CTS model has undergone rigorous validation using the latest datasets, demonstrating its robustness and predictive power. Key updates include detailed mathematical formulations, refined theoretical frameworks, and enhanced descriptions of fundamental cosmic phenomena. This manuscript presents the final validated version of the CTS model, highlighting its alignment with observational data and its implications for future research in cosmology and quantum physics.

Abstract: Qatar and other Gulf States have a diverse range of marine vegetation that is adapted to the stressful environmental conditions of seawater. The industrial wastewater produced by oil and gas activities adds further detrimental conditions for marine aquatic photosynthetic organ-isms on the Qatari coastlines. Thus, these organisms experience severe stress from both seawater and industrial wastewater. This review discusses the biodiversity in seawater around Qatar, as well as remediation methods and metabolic pathways to reduce the negative impacts of heavy metals and petroleum hydrocarbons produced during these activities. These methods include phyto-stabilization phyto-accumulation, phyto-volatilization, and phyto-degradation. Phy-to-degradation in particular is discussed in detail, including metabolic pathways such as alkane and aromatic-compound degradation pathways. The role of microorganisms that are adjacent to or associated with these aquatic marine organisms is discussed, including rhizosphere biodeg-radation. In this type of biodegradation, exudates are released by plant roots and supply nutrients to microorganisms in the rhizosphere, which enhances their ability to degrade organic pollutants. Special attention is paid to mangrove forests and their roles in remediating shores polluted by industrial wastewater. Seagrasses (Halodule uninervis, Halophila ovalis, and Thalassia hemprichii) and seaweeds (Chlorophyta, Phaeophyta, and Rhodophyta) around the peninsula of Qatar are also discussed.

This study provides an evaluation of a web-based platform for game management and sales, developed using PHP, MySQL, and SASS. The development process utilized the SCRUM methodology, concentrating on essential modules such as user management, game catalog, payment processing, and technical support. The platform's performance was assessed using Google's Lighthouse tool, which evaluates four critical areas: performance, accessibility, best practices, and SEO. The results demonstrated exceptional performance with a score of 99/100 and perfect adherence to best practices with a score of 100/100, reflecting high efficiency and compliance with web development standards. Accessibility received a score of 83/100, indicating potential areas for improvement, while SEO achieved a score of 91/100, suggesting effective search engine optimization. The findings reveal that the platform exhibits high levels of optimization and operational efficiency. However, there remains an opportunity to enhance accessibility features. This study highlights the significance of rigorous web development practices and optimization efforts in achieving superior performance and user experience in web-based systems.

Microplastics (MPs) are a critical environmental issue, with impacts ranging from ecosystem contamination to health risks through bioaccumulation. This review addresses the inefficacy of traditional water treatments in removing MPs and proposes photodegradation, particularly via nanomaterial-enhanced photocatalysts, as a solution. Utilizing their unique properties like large surface area and tunable bandgap, nanomaterials significantly improve degradation efficiency. Different strategies for photocatalysts modification to improve photocatalytic performance are thoroughly summarized, with the particular emphasis on element doping and heterojunction construction. Furthermore, this review thoroughly summarizes the possible fundamental mechanisms driving photodegradation of microplastics facilitated by nanomaterials, with a focus on processes like free radical formation and singlet oxygen oxidation. By clearly elucidating these strategies and mechanisms, this review aims to provide valuable insights and inspire further progress in microplastic photodegradation.

Cosmetic surgery is the subfield of plastic surgery that enhances appearance mainly for aesthetic reasons. Currently, cosmetic surgery interventions are highly considered appealing and popular all around the world. Several factors have contributed in this rapidly evolving field such as scientific and economic development, breaking down barriers and cultural norms, globalization, social media and mental disorders. Nowadays, the morality of cosmetic surgery is facing many dilemmas due to its benefits and drawbacks. It is proven that the advantages of cosmetic surgery include improved body confidence, mental health, and function. Additionally, aesthetic corrections can upscale the quality of life and create career opportunities for special targeted groups. Also, cosmetic surgery has a major impact in gender affirmation procedures. Although, herein we also describe the disadvantages of this widely developing field such as minor and major medical complications, potential postoperative risks and addiction in plastic surgeries associated with damaging economic issues. Lack in self-confidence, altered mental health status and ethical crisis consist another negative aspects of aesthetic surgery’s impact.

In this digital era, laundry applications come as an innovative solution to meet the laundry needs of modern people who often have busy schedules and limited time. This research aims to make a significant contribution to our broader understanding of how digital innovations can revolutionize mundane tasks. This research uses the Waterfall model, which is one of the methods in the Software Development Life Cycle (SDLC). The development process begins with the Requirement Analysis stage, where application requirements and specifications are collected and thoroughly analyzed to ensure that the developed application will meet user expectations. After that, the System Design stage is conducted, where the application architecture, user interface design, and database structure are designed in detail to ensure conformity with the previously identified needs.The next stage is Implementation, where program code is written and application features are developed according to the design that has been made. The final stage is Integration and Testing, where all application components are combined and tested thoroughly to detect and fix any errors or bugs that may exist. The results of this study produced a web-based shuttle laundry service application using the Laravel framework called "All Fresh Laundry". This application can order clothes washing services according to its membership, where there are 3 types of membership based on price and of course have different benefits. In addition, the testing phase of this application using black box testing shows that all menu features function properly according to their functions. Each component of the "All Fresh Laundry" app was thoroughly tested to ensure that no errors or malfunctions occurred. The results of this testing make it clear that every feature, from online ordering to laundry status tracking, works well and meets the specifications that have been set, so that this application can provide an optimal and reliable user experience.

Camping offers invaluable experiences in nature exploration, but the expense of acquiring camping gear can deter potential enthusiasts. To mitigate this, camping gear rental services emerge as a practical solution, promoting accessibility and reducing financial barriers. However, existing rental systems often encounter issues such as limited payment options, inconvenient pickup/return processes, and opaque management. In response, this paper introduces "Rent-n-Play," a web-based camping gear rental platform built on Laravel framework. It enables cashless transactions, offers pickup/delivery services, and employs a real-time admin system for transparent management. User feedback guided platform enhancements, including review systems and responsive support. The "Rent-n-Play" platform enhances user experience, fosters trust, and promotes sustainable camping practices, thus contributing to a more accessible and enjoyable camping culture.

The issue of sufficient nutrition and appropriate distribution in school lunch programs presents a significant challenge that must be addressed. Many schools struggle to provide food that meets all of their students’ nutritional needs. Additionally, inconsistencies in nutritional information and administrative difficulties often hinder the efficient operation of these programs. Developing technology to better manage school lunch programs is critical to addressing these issues. The goal of this project is to create a web application that ensures the fair distribution of nutritional information while also increasing the efficiency of lunch program administration. The methodology used in this research is Agile. Agile approaches are employed throughout the development process, allowing for rapid iteration and responsiveness to user feedback. The end result is a web tool called Nourishify, designed to streamline the management and dissemination of nutritional information. Implementing Nourishify led to substantial improvements in access to nutrition information and operational efficiency, making it an innovative solution for school lunch programs. This project demonstrates that integrating technology can significantly enhance the administration and transparency of nutrition programs, ultimately benefiting students' health and well-being. Moreover, Nourishify’s user-friendly interface and real-time data capabilities ensure that all stakeholders, including parents, administrators, and nutritionists, can easily collaborate and access crucial information.

Point of Sales (POS) systems are an important component of sales and inventory management for many businesses. This article discusses the development of a POS application designed to simplify the process of selling products in stores. The application uses PHP for the server, JavaScript for the client, Bootstrap for responsive design, and MySQL as the database. Its main features include a dashboard with daily sales summary, visual graphs, product category management, product addition and editing, admin and access rights management, ease of sales transaction processing, access to sales reports and analyses by leaders, and provision of sales reports in various formats. The clean and easy-to-use interface is expected to improve the efficiency of sales and inventory management, and assist businesses in making data-driven decisions.

This study focuses on the creation and implementation of a platform to improve personal financial management for scholarship students of the National Program of Scholarships and Educational Credit (Pronabec) in Peru. Using a mixed methodology that combines qualitative and quantitative techniques, the effectiveness and user satisfaction with the platform were evaluated. The results indicated that 50\% of users found the tool useful, 55\% considered it easy to use, 70\% reported a positive impact on their personal budget planning, and 85\% expressed high overall satisfaction. In addition to providing tools for financial recording and analysis, the platform promotes financial education among its users, significantly contributing to improving their financial management skills.

This study provides a thorough examination of the introduction of 5G technology in Bangladesh's agriculture sector, providing insights into the problems and potential implications related to its adoption. Focusing on the contextual landscape of Bangladesh, the study evaluates the effectiveness, efficiency, scalability, and ease of implementation of 5G technology concerning key challenges faced by the agricultural sector. Drawing comparisons with global perspectives, including countries such as China, Taiwan, Colombia, Netherlands, and India, the analysis provides a nuanced understanding of the diverse technological landscapes. The examination encompasses the evolution from 4G to 5G, emphasizing the commitment of major telecommunications providers in Bangladesh to advance technological capabilities. The challenges in rural adoption, limited technology literacy among farmers, and high smartphone costs are discussed, highlighting potential barriers to seamless integration. To address the creation of a more comprehensive technological infrastructure, the study also explores the efforts and regulatory support provided by the government and the Bangladesh Telecommunication Regulatory Commission (BTRC). Furthermore, the comparative analysis sheds light on the unique characteristics and advancements in other countries, contributing to a holistic understanding of 5G's role in transforming global agricultural practices. By exploring the anticipated socio-economic factors influencing the pace and success of 5G adoption in the agricultural sector, this paper emphasizes the need for collaborative efforts, infrastructure development, and addressing accessibility challenges to achieve widespread agricultural technology integration.

RNA sequencing techniques, like bulk RNA-seq and Single Cell (sc) RNA-seq, are critical tools for the biologist looking to analyze the genetic activity/transcriptome of a tissue or cell during an experimental procedure. Platforms like Illumina's next-generation sequencing (NGS) are used to produce the raw data for this experimental procedure. This raw FASTQ data must then be prepared via a complex series of data manipulations by bioinformaticians. This process currently takes place on an unwieldy textual user interface like a terminal/command line that requires the user to install and import multiple program packages, preventing the untrained biologist from initiating data analysis. Open-source platforms like Galaxy have produced a more user-friendly pipeline, yet the visual interface remains cluttered and highly technical, remaining uninviting for the natural scientist. To address this, SeqMate is a user-friendly tool that allows for one-click analytics by utilizing the power of a large language model (LLM) to automate both data preparation and analysis (differential expression, trajectory analysis, etc). Furthermore, by utilizing the power of generative AI, SeqMate is also capable of analyzing such findings and producing written reports of upregulated/downregulated/user-prompted genes with sources cited from known repositories like PubMed, PDB, and Uniprot.

The existing PDC(Polycrystalline Diamond Compacts) -cone hybrid bit bearing adopts a unilateral support structure, which is prone to stress concentration in the journal area, resulting in fracture and wear failure of the bearing, thus reducing the service life of the hybrid bit. In this paper, a new type of double supported bearing hybrid bit is proposed. The static strength analysis of unilateral and bilateral support bearing structures is carried out by finite element simulation, and the stress and strain distribution of the two structures under the load of 20KN-100KN is obtained. Experimental devices for unilateral and bilateral support bearing structures are designed and manufactured to complete 50KN-100KN static pressure loading experiments. The results showed that the stress and strain of unilateral and bilateral support bearing increased linearly with the increase of load. Compared with unilateral bearing, when the load was 100KN, the maximum Mises stress of bilateral bearing decreased from 358.80MPa to 211.10MPa, with a decrease of 41.16%. The maximum contact stress decreased from 415.20MPa to 378.10MPa, decreased by 8.94%, and the maximum principal strain decreased from 11.01e-4 to 9.71e-4, decreased by 11.81%. The axial strain in the danger zone was reduced by 14.68% and 17.35%, respectively. It is found that the contact stress of the simulation data is highly correlated with the bearing life, and the service life of the bilateral bearing bit is increased by 8.94%. The simulation data and experimental results provide data support for the production of hybrid bits with bilateral bearing support.

The integration of solar energy systems with agricultural practices, known as agrivoltaic systems, presents a promising solution for advancing sustainable food and energy production. This approach involves installing photovoltaic panels on agricultural lands, which allows for simultaneous crop cultivation and energy generation. Agrivoltaic systems offer a dual benefit: they enhance land use efficiency by utilizing the same area for both solar power generation and crop production, and they contribute to sustainable energy transitions. This abstract explores the benefits and challenges associated with agrivoltaic systems. Key advantages include increased land productivity, reduction in water usage due to shading effects, and potential economic gains from dual income streams. Furthermore, these systems can mitigate land use conflicts by combining food production with renewable energy generation. However, there are challenges to address, including the potential for decreased crop yields under solar panels, the need for appropriate system design to balance energy generation and agricultural needs, and the economic feasibility of initial investment and maintenance. The integration of agrivoltaic systems represents a critical step toward achieving sustainable development goals by promoting environmental stewardship and resource efficiency. Future research and advancements in technology are essential to optimize system performance and maximize benefits for both agriculture and energy sectors.

New setting is introduced to study neutrosophic failed-independent number and failed independent neutrosophic-number arising neighborhood of different vertices. Neighbor is a key term to have these notions. Having all possible edges amid vertices in a set is a key type of approach to have these notions namely neutrosophic failed-independent number and failed independent neutrosophic-number. Two numbers are obtained but now both settings leads to approach is on demand which is finding biggest set which have all vertices which are neighbors. Let NTG : (V,E,σ,μ) be a neutrosophic graph. Then failed independent number I(NTG) for a neutrosophic graph NTG : (V,E,σ,μ) is maximum cardinality of a set S of vertices such that every two vertices of S are endpoints for an edge, simultaneously; failed independent neutrosophic-number In(NTG) for a neutrosophic graph NTG : (V,E,σ,μ) is maximum neutrosophic cardinality of a set S of vertices such that every two vertices of S are endpoints for an edge, simultaneously. As concluding results, there are some statements, remarks, examples and clarifications about some classes of neutrosophic graphs namely path-neutrosophic graphs, cycle-neutrosophic graphs, complete-neutrosophic graphs, star-neutrosophic graphs, complete-bipartite-neutrosophic graphs and complete-t-partite-neutrosophic graphs. The clarifications are also presented in both sections “Setting of Neutrosophic Failed-Independent Number,” and “Setting of Failed Independent Neutrosophic-Number,” for introduced results and used classes. Neutrosophic number is reused in this way. It’s applied to use the type of neutrosophic number in the way that, three values of a vertex are used and they’ve same share to construct this number to compare with other vertices. Summation of three values of vertex makes one number and applying it to a comparison. This approach facilitates identifying vertices which form neutrosophic failed-independent number and failed independent neutrosophic-number arising neighborhoods of vertices. In path-neutrosophic graphs, two neighbors, form maximal set but with slightly differences, in cycle-neutrosophic graphs, two neighbors forms maximal set. Other classes have same approaches. In complete-neutrosophic graphs, a set of all vertices leads us to neutrosophic failed-independent number and failed independent neutrosophic-number. In star-neutrosophic graphs, a set of vertices containing only center and one other vertex, makes maximal set. In complete-bipartite-neutrosophic graphs, a set of vertices including two vertices from different parts makes intended set but with slightly differences, in complete-t-partite-neutrosophic graphs, a set of t vertices from different parts makes intended set. In both settings, some classes of well-known neutrosophic graphs are studied. Some clarifications for each result and each definition are provided. Using basic set to extend this set to set of all vertices has key role to have these notions in the form of neutrosophic failed-independent number and failed independent neutrosophic-number arising neighborhood of vertices. The cardinality of a set has eligibility to neutrosophic failed-independent number but the neutrosophic cardinality of a set has eligibility to call failed independent neutrosophic-number. Some results get more frameworks and perspective about these definitions. The way in that, two vertices have connections amid each other, opens the way to do some approaches. A vertex could affect on other vertex but there’s no usage of edges. These notions are applied into neutrosophic graphs as individuals but not family of them as drawbacks for these notions. Finding special neutrosophic graphs which are well-known, is an open way to pursue this study. Some problems are proposed to pursue this study. Basic familiarities with graph theory and neutrosophic graph theory are proposed for this article.

The use of credit cards and online banking is expanding exponentially. As more individuals use debit cards, credit cards, and internet banking, the likelihood of falling victim to various forms of fraud also rises. Due to ignorance, credit card company customers have provided their card details, personal information, and one-time password to an unknown bogus caller on several occasions in the recent past. One of the biggest issues facing financial institutions and customers alike is credit card theft. It may result in large financial losses and harm to the financial institution's image. While there are several ways to identify credit card fraud, one of the best is machine learning.By using past data, machine learning algorithms may be trained to recognize trends and abnormalities that point to fraud. The state-of-the-art in machine learning for credit card fraud detection is reviewed in this study. Numerous research on the same subject have been conducted in the past with a variety of well-known machine-learning techniques. However, with a grasp of the notion of hybrid machine learning, we will now examine how well hybrid machine learning performs on the same problem statement.

Abstract: Comorbidities of patients may be related to the duration of mechanical ventilation, survival, and Candida isolation during intensive care unit (ICU) stay. To examine the frequency of Candida isolation and significant comorbidities in the surgical intensive care unit (ICU) in Osijek University Hospital, Croatia, the data from the electronic database from May 2016 to June 30, 2023, were analyzed. In a cross-sectional study examining 15,790 microbiological samples, different strains of Candida were observed in 581 samples from 236 patients. The control group was 160 consecutive patients from March-May 2019, and 161 in the same months of 2020 (pre- and post-COVID-19). Comorbidities, duration of mechanical ventilation and survival were compared. Patients with isolated Candida were more often non-elective, had significantly more heart, kidney, liver diseases and sepsis (P<0.001). The duration of mechanical ventilation was 9.2 [2.2-9.24], 96 [24-146], 160 [19.5-343] and 224 [73.5-510] hours in controls, and patients with Candida albicans, non-albicans, and in patients with ³2 Candidas isolated. The mortality was significantly higher and reached 42% in patients with Candida isolated, while in the control group, it was 19% (P<0.001). In a multivariate analysis adjusted for patient’s age, SAPS II score, days of ICU, and type of admission, only sepsis was independent predictor of mortality (OR = 2.27).

Visualising textual content could be helpful to professionals as well as amateurs across several fields. However, training a text-to-image generator in the mainstream domain requires large amounts of paired text-image and data, which is too expensive to collect since labeling millions of images and videos can be tiresome. GANs like StackGAN and StyleGAN can be considered as solutions to generate images from text. But the images generated may be of low accuracy and resolution, and the entire processing can be highly time-consuming. Moreover, image generation is a notion that is still being researched. Hence, the process of developing a Video Generation model necessitates substantial research. Despite the need for such a model, modern technology has lagged behind the solutions to this problem. This proposal suggests combining two methods, Text modification for Action Definition (TexAD) and SeQuential Image Generation for Video Synthesis (SQIGen). The proposed solution synthesises a sequence of images from textual information feeds and combines these images to create a video. TexAD uses Natural Language Processing and Deep Learning techniques to process, classify and modify text data. SQIGen is an extension of the VQGAN+CLIP neural network architecture that generates a sequence of images from the modified text data

Influencer marketing has become a pivotal component of digital marketing strategies, offering brands a unique way to connect with audiences through trusted voices. However, measuring the return on investment (ROI) from influencer marketing campaigns can be challenging due to the intangible nature of brand influence and engagement. This abstract explores various techniques and strategies to measure and optimize ROI in influencer marketing. Measurement Techniques: The paper delves into both quantitative and qualitative methods for assessing influencer marketing ROI. Quantitative techniques include tracking metrics such as impressions, clicks, conversions, and sales, using tools like Google Analytics and social media insights. Additionally, advanced attribution models, such as multi-touch attribution and econometric modeling, are discussed for more accurately linking influencer activities to business outcomes. Qualitative approaches involve sentiment analysis and brand awareness studies, which help gauge the impact of campaigns on brand perception and customer loyalty. Optimization Strategies: To maximize the effectiveness of influencer marketing, the paper outlines several optimization strategies. These include selecting the right influencers based on audience alignment and engagement rates, setting clear and measurable campaign goals, and employing A/B testing to refine content and strategies. The importance of long-term partnerships and content diversification is also emphasized, as they can enhance authenticity and sustain audience interest. The abstract concludes that a comprehensive approach combining rigorous measurement techniques and strategic optimization can significantly enhance the ROI of influencer marketing campaigns. By continuously analyzing data and refining strategies, brands can better leverage influencer partnerships to achieve their marketing objectives.

The convergence of digital twin technology with additive manufacturing (AM) represents a transformative advancement in the fields of design, simulation, and production. Digital twins—virtual replicas of physical assets—enable real-time monitoring, simulation, and optimization of manufacturing processes by mirroring their physical counterparts. When integrated with additive manufacturing, which allows for the creation of complex geometries and rapid prototyping, digital twins enhance the ability to design, test, and refine products with unprecedented precision and efficiency. This integration facilitates iterative design improvements, predictive maintenance, and real-time process adjustments, leading to more accurate simulations and optimized production workflows. By leveraging data from digital twins, manufacturers can anticipate issues, reduce material waste, and shorten development cycles. This abstract explores how the fusion of digital twin technology with AM not only refines traditional manufacturing paradigms but also paves the way for more innovative and adaptive manufacturing practices.

Emission trading schemes (ETSs) have become vital tools in striving toward global emission reduction objectives and promoting a sustainable economy. This paper empirically investigates the impact of market conditions on interconnectedness within precious metals, clean energy, green bonds, and carbon markets, focusing on China and the EU ETSs as the study subjects. A TVP-VAR-based asymmetric connectedness approach is adopted to capture the evolving relationships between the variables of interest in the time–frequency domain. The empirical findings reveal that: First, time-varying asymmetric connectedness and spillover effects among clean energy, precious metals, green bonds, and carbon markets are identified in both time and frequency domains under diverse market conditions, with long-term connectedness asymmetry being particularly sensitive, although spillovers exhibit variations. Second, the role and intensity of net transmitters or receivers vary across market conditions and frequency domains, indicating the complex and nuanced nature of market interactions. The EU ETS demonstrates a higher level of connectivity with global markets for clean energy, precious metals, and green bonds when compared to the Chinese ETS. However, it also shows greater susceptibility to fluctuations in market conditions. These results have significant implications for both investors striving to build sustainable diversified portfolios and regulators endeavoring to craft effective policies for risk regulation and sustainable development.

Large Language Models (LLMs) have proved significant proficiency when comes to code generation especially in Structured Query Language (SQL) for databases and recent successful Text-to-SQL method involves fine-tuning pre-trained LLMs for SQL generation tasks. Transforming natural language text into SQL queries, has been attempted to solve with various learning techniques including Few-shot learning[1], fine tuning. In this paper we propose Supervised fine-tuning (SFT) as a better alternative for learning technique for text-to-SQL generation task using Code-Llama that pushes state of art accuracy on spider test suite to 89.6% on dev set which represent first instance of surpassing the earlier best-in-class with 5.5% higher score and 86.8% of exact match accuracy on dev set. Furthermore, we demonstrate that properly prompted LLM along with SFT provides far fewer hallucinations and much more robust LLM that can be used as a general tool for any text-to-SQL generation use case.

The advent of artificial intelligence (AI) has revolutionized digital marketing, offering unprecedented levels of personalization. AI-driven personalization leverages machine learning algorithms and data analytics to tailor content, advertisements, and recommendations to individual consumers based on their behavior, preferences, and demographics. This paper explores the effectiveness of AI-driven personalization in enhancing customer engagement, increasing conversion rates, and improving overall marketing efficiency. It also examines the ethical considerations associated with these technologies, including data privacy, consent, and the potential for manipulation or bias. While AI-driven personalization can lead to more relevant and engaging consumer experiences, it raises critical ethical questions that must be addressed to ensure responsible and fair use. The study concludes with recommendations for marketers and policymakers to balance the benefits of AI personalization with the need for ethical standards and consumer protection.

Perovskite-silicon tandem solar cells represent a significant advancement in photovoltaic technology, aiming to overcome the efficiency limitations of traditional silicon-based solar cells. This paper explores recent developments in the fabrication and optimization of these tandem cells, focusing on improving both efficiency and long-term stability. The combination of perovskite materials with silicon allows for broader spectrum absorption, which enhances the overall power conversion efficiency. Key strategies include optimizing the perovskite layer's composition, improving the interface between layers to reduce recombination losses, and incorporating advanced encapsulation techniques to mitigate degradation from environmental factors such as moisture and UV exposure. The review also highlights the challenges faced in scaling up production while maintaining high performance and stability. Emerging trends in material engineering and device architecture are discussed, providing insights into future directions for making perovskite-silicon tandem solar cells a viable commercial technology. This study underscores the potential of these hybrid systems to significantly boost the efficiency of photovoltaic systems, offering a promising pathway towards more sustainable and costeffective solar energy solutions.

The transition to renewable energy sources is critical for sustainable development, particularly in rural regions with limited access to electricity. Solar-powered microgrids offer a promising solution for rural electrification by providing reliable, clean energy that can enhance economic opportunities and improve quality of life. This paper presents a techno-economic analysis of solar-powered microgrids for rural areas, evaluating their feasibility, costs, and benefits. The analysis encompasses technological aspects, such as solar panel efficiency, battery storage, and grid management, alongside economic factors including initial investment, maintenance costs, and potential returns. Additionally, the study assesses the social impact of solar-powered microgrids, exploring their effects on local communities, including improvements in education, health, and economic activities. The findings indicate that solar microgrids can be a viable and impactful solution for rural electrification, with significant long-term benefits for both economic development and social well-being.

This qualitative research explores the impact of Artificial Intelligence (AI) on Customer Relationship Management (CRM), providing a comprehensive analysis of how AI technologies are transforming CRM practices. AI integration in CRM has revolutionized customer interactions, enabling enhanced personalization, efficiency, and customer engagement. By leveraging machine learning, natural language processing, and predictive analytics, organizations can create highly tailored customer experiences, automate routine tasks, and anticipate future customer needs with precision. The study identifies the significant benefits of AI, including improved customer insights, faster response times, and proactive engagement strategies. However, it also highlights the challenges associated with AI adoption in CRM, such as data privacy and security concerns, algorithmic bias, high implementation costs, and resistance to change. The findings emphasize the need for robust data protection measures, strategies to mitigate biases, significant investments in technology and training, and effective change management to overcome these challenges. The thematic analysis reveals key areas where AI is making an impact, including customer service, customer segmentation, and personalized marketing strategies. Additionally, the study discusses the organizational implications of AI adoption, such as enhanced decision-making, increased productivity, and the necessity for staff reskilling. Future directions for AI in CRM suggest further advancements in AI algorithms, greater integration with other business systems, enhanced customer experiences, and a focus on ethical AI practices. This research underscores the transformative potential of AI in CRM and provides insights for organizations aiming to leverage AI for improved customer relationship management.

This study explores the influence of social media marketing on brand loyalty, employing a qualitative research approach to gain in-depth insights into the key factors that drive consumer engagement and commitment. Through semi-structured interviews with 20 active social media users and a comprehensive analysis of social media content, the research identifies several critical elements affecting brand loyalty. Personalization emerged as a central theme, with tailored content, customized offers, and personalized recommendations significantly enhancing users' emotional connection with brands. High-quality content, characterized by engaging visuals and valuable information, was found to reinforce positive brand perceptions and sustain loyalty. Influencer marketing also plays a pivotal role, with authentic endorsements from relevant influencers boosting brand credibility and trust. Effective community management, involving active engagement, responsive feedback, and relationship-building, contributes to a positive brand experience and strengthens user loyalty. Targeted and relevant social media advertising supports brand loyalty, although excessive or irrelevant ads can lead to disengagement. The study also highlights the importance of balancing interaction frequency and content quality to maintain user interest without causing fatigue. Addressing social media fatigue by delivering relevant and valuable content is crucial for preventing user disengagement. Content that resonates with users' values and emotions further strengthens brand attachment. Consistency in brand voice, visual identity, and values ensures a coherent and positive brand experience. The findings emphasize the need for a strategic approach to social media marketing, integrating personalization, content quality, influencer partnerships, community management, advertising relevance, and consistency to build and sustain strong brand loyalty.

This study investigates the adoption of Robotic Process Automation (RPA) in marketing operations, exploring its impact on efficiency, data accuracy, and overall effectiveness. RPA has emerged as a transformative technology, automating routine tasks such as data entry, report generation, and campaign management, which has significantly enhanced operational efficiency within marketing departments. By automating repetitive processes, RPA enables marketing professionals to focus on strategic and creative tasks, resulting in accelerated campaign execution and improved productivity. Additionally, the integration of RPA with Customer Relationship Management (CRM) systems has led to more accurate and consistent data, providing valuable real-time insights that enhance decision-making and personalization in marketing strategies. Despite these benefits, the study also highlights several challenges associated with RPA adoption. These include concerns about workforce implications, such as job displacement and the need for reskilling, as well as implementation difficulties related to system compatibility and workflow design. Ethical and regulatory considerations, particularly regarding data privacy and compliance, are also critical factors that organizations must address to maintain customer trust and adhere to legal standards. The study further explores the potential of integrating artificial intelligence (AI) with RPA to drive future innovations in marketing automation. AI-driven RPA offers advanced capabilities, including predictive modeling and personalized marketing, which promise to enhance the effectiveness of automation strategies. The findings underscore the need for organizations to adopt best practices in RPA implementation and remain adaptable to technological advancements to fully leverage the benefits of automation and maintain a competitive edge in the dynamic marketing landscape.

Big data analytics has fundamentally transformed how organizations enhance customer experience by leveraging vast amounts of data to tailor interactions, streamline services, and drive strategic decisions. This research explores the multifaceted role of big data in improving customer experiences, focusing on its impact on personalization, customer service, operational efficiency, and strategic decision-making. By analyzing recent advancements and applications, the study highlights how big data analytics enables highly personalized recommendations, targeted marketing efforts, and dynamic content that significantly enhance customer engagement. Additionally, it examines the improvements in customer service through real-time support, sentiment analysis, and predictive assistance, which collectively contribute to a more responsive and customer-centric approach. The research also addresses how big data analytics optimizes operational efficiency by streamlining workflows, improving resource allocation, and reducing costs, thus enhancing overall organizational performance. Strategic decision-making benefits from data-driven insights into market trends, pricing strategies, and competitive positioning, allowing organizations to adapt and thrive in a competitive environment. However, the study also acknowledges the challenges associated with data quality, privacy, and investment, emphasizing the need for robust measures to address these issues. Furthermore, the integration of big data with emerging technologies such as artificial intelligence, the Internet of Things, and blockchain presents new opportunities and complexities in enhancing customer experience. Overall, this research underscores the transformative potential of big data analytics while highlighting the importance of addressing its associated challenges to fully capitalize on its benefits.

This study explores consumer perceptions of virtual reality (VR) in marketing, aiming to understand how immersive technology impacts engagement and brand perception. As VR continues to evolve and integrate into various marketing strategies, it becomes crucial to examine its effectiveness and the factors influencing consumer attitudes. Through a detailed thematic analysis, this research identifies key themes such as familiarity with VR technology, immersion and engagement, technical quality, accessibility, personalization, storytelling, social interaction, purchase intentions, and brand perception. The findings reveal that familiarity with VR enhances enthusiasm and comfort, leading to more positive attitudes towards VR marketing. The immersive and multi-sensory nature of VR provides a significant advantage over traditional advertising methods, fostering stronger emotional connections and increasing memorability. However, the quality of the VR experience is critical; high-quality graphics and seamless interactions are essential for maintaining positive consumer perceptions. Technical issues, such as lag and motion sickness, can negatively impact the experience, especially for those less acquainted with VR technology. Accessibility remains a challenge, with limited access to VR headsets restricting the reach of VR marketing campaigns. Personalization of VR content is highly valued, though it must be balanced with ethical considerations related to data privacy. The power of storytelling in VR enhances engagement by allowing consumers to actively participate in narratives. Social interaction within VR experiences adds an extra layer of enjoyment. The study also highlights the practical applications of VR marketing in high-involvement sectors and underscores the need for continuous innovation and consumer feedback to maximize the technology's impact. Overall, VR holds significant potential to transform marketing practices by offering immersive, engaging, and memorable experiences that deepen consumer connections and drive positive outcomes.

This study explores the role of chatbots in enhancing customer service, examining their benefits, limitations, and overall impact on modern support systems. Chatbots have emerged as a transformative technology in customer service, offering significant advantages such as increased efficiency through automation of routine tasks, reduced response times, and the ability to provide 24/7 support. By handling high volumes of inquiries and managing repetitive tasks, chatbots alleviate the workload of human agents, allowing them to focus on more complex issues. Additionally, chatbots employ advanced data analytics and machine learning to deliver personalized interactions, enhancing user engagement and satisfaction. Despite these benefits, the research identifies several challenges, including chatbots' difficulty in managing complex queries and their lack of emotional intelligence, which often necessitates escalation to human agents. The study also highlights the importance of well-designed chatbots and seamless integration with existing systems to ensure effective user experiences. Privacy and security concerns are critical, as chatbots handle sensitive customer data, requiring robust measures to protect against breaches and ensure compliance with data protection regulations. Looking ahead, advancements in technologies such as augmented reality (AR), virtual reality (VR), and artificial intelligence (AI) are expected to further enhance chatbot capabilities, addressing current limitations and expanding their role in customer service. The findings suggest that a hybrid approach, combining chatbots with human support, offers the most effective solution for delivering high-quality customer service. Overall, chatbots have proven to be valuable assets, and their continued evolution promises to significantly impact the future of customer service.

This study investigates the influence of digital marketing on consumer purchasing decisions, focusing on how various strategies impact consumer behavior. By analyzing data collected from in-depth interviews and thematic analysis, the research highlights several key factors driving consumer engagement and purchases. Personalized content emerged as a significant factor, with tailored recommendations and customized email campaigns creating a sense of individual attention and enhancing consumer involvement. Social media platforms played a pivotal role, with advertisements, influencer endorsements, and user-generated content significantly affecting purchasing decisions. The impact of visual content, including high-quality images and videos, was also notable, as these elements helped consumers better understand products and increased their confidence in making purchases. Email marketing proved effective, particularly when offering exclusive discounts and creating a sense of urgency. Mobile marketing demonstrated its growing influence, with consumers valuing the convenience of mobile-friendly websites and app notifications. The integration of artificial intelligence further improved the shopping experience by providing instant assistance and personalized recommendations. Ethical considerations, such as data privacy and honest advertising, were essential for maintaining consumer trust and loyalty. User-generated content provided authentic insights that influenced purchasing decisions, while omnichannel strategies offered a seamless and flexible shopping experience. Gamification elements, including reward programs and interactive challenges, enhanced consumer engagement and motivation. The study concludes that a multifaceted approach to digital marketing, incorporating these strategies, is crucial for effectively engaging consumers and driving sales. The findings offer valuable insights for marketers aiming to optimize their digital marketing strategies in the evolving digital landscape.

This study explores the transformative impact of machine learning on predictive analytics within supply chain management. As supply chains become increasingly complex and dynamic, traditional methods of forecasting and management are proving inadequate. Machine learning offers advanced algorithms capable of analyzing vast datasets to uncover patterns and trends that enhance decision-making processes. This research investigates how machine learning improves demand forecasting accuracy, optimizes inventory management, strengthens supplier relationships, and enhances risk management. The study employs a qualitative approach, analyzing data from industry case studies and expert interviews to identify key themes and challenges associated with the adoption of machine learning. Findings reveal that machine learning significantly improves forecasting precision, reduces inventory costs, and enables proactive supplier and risk management. However, challenges such as ensuring data quality, acquiring specialized skills, integrating new technologies with existing systems, and addressing ethical considerations are critical. The study also highlights the potential of emerging technologies like blockchain, IoT, and 5G to further enhance machine learning applications in supply chain management. This research contributes to a deeper understanding of how machine learning can drive innovation and efficiency in supply chains, while also addressing the hurdles that organizations must overcome. The results underscore the need for a balanced approach that incorporates technological advancements and ethical practices to fully leverage the benefits of machine learning.

This study explores the impact of artificial intelligence (AI) on digital marketing strategies, emphasizing how AI technologies have transformed marketing practices. AI's ability to analyze vast amounts of data has significantly enhanced targeting and personalization, enabling marketers to deliver highly relevant and tailored content to specific consumer segments. The integration of AI in content creation has streamlined processes, improving efficiency while maintaining high standards of quality and relevance. Customer engagement has also been revolutionized through AI-driven tools such as chatbots and predictive assistance, which provide real-time, personalized support and enhance overall user satisfaction. Despite the numerous benefits, the adoption of AI in digital marketing presents challenges, including data privacy concerns, algorithmic bias, high implementation costs, and the complexity of integrating AI with existing marketing systems. The shortage of skilled professionals further complicates effective AI utilization. Looking forward, the potential for AI to drive innovation in digital marketing is substantial, with opportunities for advancements in personalization, predictive analytics, and the integration of emerging technologies like virtual and augmented reality. However, it is essential for businesses to navigate these developments carefully, addressing ethical considerations and ensuring responsible use of AI to maintain consumer trust and achieve sustained success. This study provides insights into the transformative effects of AI on digital marketing and offers a comprehensive overview of the associated benefits and challenges, highlighting the need for a balanced approach to leveraging AI technology.

This research explores the adoption of advanced analytics in supply chain decision-making, emphasizing its transformative impact on organizational efficiency and strategic advantage. The study investigates the key drivers behind the adoption of advanced analytics, including the growing complexity of data, the need for agility, and the pursuit of competitive advantage and cost reduction. It identifies significant challenges such as data integration difficulties, high implementation costs, and a shortage of skilled professionals, which organizations face when integrating these sophisticated tools. Despite these challenges, the research highlights the substantial benefits of advanced analytics, including enhanced forecasting accuracy, improved supply chain visibility, optimized processes, and cost savings. The findings indicate that while the implementation of advanced analytics varies across different sectors—such as retail, manufacturing, logistics, and healthcare—the overarching themes of improved efficiency and better decision-making are consistently observed. The study also discusses future trends, noting the integration of emerging technologies such as artificial intelligence, machine learning, and blockchain, which promise to further enhance analytics capabilities and accessibility. The successful adoption of advanced analytics relies not only on technological advancements but also on fostering a data-driven organizational culture, investing in continuous learning, and ensuring robust data governance. As supply chain management continues to evolve, advanced analytics will play a crucial role in driving strategic success and maintaining a competitive edge in a complex and dynamic market environment.

The integration of Augmented Reality (AR) in e-commerce has emerged as a transformative development, reshaping how consumers interact with online retail environments. This research explores the impact of AR on e-commerce by examining its effects on consumer behavior, purchase decisions, and overall shopping experience. Through a series of interviews with industry experts, the study uncovers key insights into how AR enhances product visualization, leading to improved consumer confidence and a reduction in return rates. The immersive and interactive nature of AR applications has been shown to significantly increase consumer engagement and conversion rates, as users are able to interact with products in a virtual setting that simulates real-world experiences. Despite these advantages, the research also highlights several challenges associated with AR implementation, including the high costs of development and maintenance, difficulties in integrating AR technology with existing e-commerce platforms, and concerns regarding privacy and data security. The study further explores the varying applications of AR across different sectors within e-commerce, such as fashion, furniture, and cosmetics, each benefiting from unique AR functionalities. Looking ahead, the potential for AR to be enhanced by emerging technologies like Artificial Intelligence and the Internet of Things is discussed, with implications for future advancements in the field. Overall, the research demonstrates that while AR offers significant benefits for enhancing online shopping experiences, addressing its associated challenges is crucial for its successful and widespread adoption.

This study explores the application of data mining techniques in marketing strategies, highlighting their impact on customer segmentation, predictive analytics, and personalization. Data mining has emerged as a transformative tool for businesses seeking to enhance their marketing effectiveness by providing deep insights into customer behavior and preferences. Techniques such as clustering, predictive modeling, and personalization are examined for their roles in improving marketing outcomes. Clustering methods, including K-means and hierarchical clustering, enable businesses to categorize customers into meaningful segments, allowing for more targeted marketing efforts. Predictive analytics, utilizing models like decision trees and neural networks, offers the capability to forecast future customer behaviors and trends, thereby optimizing resource allocation and strategy planning. Personalization techniques, such as collaborative filtering and dynamic recommendations, enhance customer engagement by delivering tailored content and offers. Despite these advantages, the study also addresses the challenges associated with data mining, including data privacy concerns, data quality issues, and the shortage of skilled personnel. These challenges underscore the need for effective data management practices and ethical considerations in the application of data mining. Furthermore, the integration of emerging technologies like artificial intelligence and real-time analytics is discussed as a means to overcome existing obstacles and drive future advancements in marketing strategies. The findings underscore the significant role of data mining in revolutionizing marketing practices and highlight the ongoing need for adaptation and innovation in response to evolving market dynamics.

This research explores the transformative impact of artificial intelligence (AI) on personalizing marketing campaigns, highlighting how AI technologies are reshaping modern marketing practices. AI tools such as machine learning, natural language processing (NLP), predictive analytics, deep learning, and computer vision are integral to enhancing customer engagement and optimizing marketing strategies. Machine learning algorithms enable precise customer segmentation and personalized recommendations, leading to more targeted and effective marketing messages. NLP facilitates the analysis of customer sentiment and enhances communication through advanced language processing and AI-powered chatbots. Predictive analytics and deep learning provide businesses with the capability to forecast customer behaviors and recognize complex data patterns, further refining marketing efforts. Computer vision technology contributes to personalization through innovations like visual search and augmented reality, creating immersive customer experiences. Despite the numerous benefits, the adoption of AI in marketing presents several challenges. Data privacy and security concerns, integration complexities, and the potential for algorithmic bias are critical issues that need to be addressed. Ethical considerations, including transparency and fairness in data usage, are also paramount to maintaining customer trust and ensuring responsible AI application. The future of AI in marketing promises continued advancements, with trends such as hyper-personalization and enhanced integration with technologies like the Internet of Things and voice search expected to drive further innovation. Overall, AI significantly enhances marketing effectiveness by offering tailored solutions and strategic insights while necessitating a thoughtful approach to ethical and practical challenges.

Artificial intelligence (AI) has emerged as a transformative force in retail operations, promising significant advancements in efficiency, customer engagement, and competitive positioning. This research explores the integration of AI in retail, focusing on its potential benefits, challenges, and future trends. Through a comprehensive analysis, the study identifies key motivations for AI adoption, such as enhancing operational efficiency, optimizing inventory management, and personalizing customer interactions. Retailers are increasingly leveraging AI to streamline processes and gain insights into consumer behavior, which allows for more strategic decision-making and improved customer experiences. However, the implementation of AI is not without its obstacles. High costs, the need for specialized skills, and concerns about data privacy and ethical use of AI present substantial challenges. The impact of AI on employment, including job displacement and the necessity for reskilling, is also a critical consideration. Future trends suggest that AI will continue to drive innovation in retail, with developments in AI-powered analytics, autonomous retail solutions, and sustainability initiatives shaping the industry’s future. The study highlights the importance of addressing these challenges and ethical considerations to fully realize the potential of AI in retail. The findings emphasize the need for retailers to adopt a strategic approach to AI integration, balancing innovation with responsible practices to achieve long-term success. Overall, this research provides valuable insights into the evolving role of AI in retail and offers a foundation for understanding the complexities and opportunities associated with its adoption.