Authenticate for using REST

This page describes how to authenticate when you make a REST request to a Google API.

For information about how to authenticate when you use Google client libraries, see Authenticate using client libraries.

Before you begin

To run the samples on this page, complete the following steps:

  1. Install the Google Cloud CLI.
  2. To initialize the gcloud CLI, run the following command:

    gcloud init
  3. Enable the Cloud Resource Manager and Identity and Access Management (IAM) APIs:

    gcloud services enable cloudresourcemanager.googleapis.com iam.googleapis.com

If you don't want to use the gcloud CLI, you can skip these steps and use the metadata server to return a token.

Types of credentials

You can use the following types of credentials to authenticate a REST call:

  • Your gcloud CLI credentials.

    This approach is the easiest and most secure way to provide credentials to a REST method in a local development environment. If your user account has the necessary Identity and Access Management (IAM) permissions for the method you want to call, this is the preferred approach.

    Your gcloud credentials are not the same as the credentials you provide to ADC using the gcloud CLI. For more information, see gcloud CLI authentication configuration and ADC configuration.

  • The credentials provided to Application Default Credentials (ADC).

    This method is the preferred option for authenticating a REST call in a production environment, because ADC finds credentials from the resource where your code is running (such as a Compute Engine virtual machine). You can also use ADC to authenticate in a local development environment. In this scenario, the gcloud CLI creates a file that contains your credentials in your local file system.

  • The credentials provided by impersonating a service account.

    This method requires more setup. If you want to use your existing credentials to obtain short-lived credentials for another service account, such as testing with a service account locally or requesting temporary elevated privileges, use this approach.

  • The credentials returned by the metadata server.

    This method works only in environments with access to a metadata server. The credentials returned by the metadata server are the same as the credentials that would be found by Application Default Credentials using the attached service account, but you explicitly request the access token from the metadata server and then provide it with the REST request. Querying the metadata server for credentials requires an HTTP GET request; this method does not rely on the Google Cloud CLI.

gcloud CLI credentials

To run the example below, you need the resourcemanager.projects.get permission on the project. The resourcemanager.projects.get permission is included in a variety of roles—for example, the Browser role (roles/browser).

  1. Use the gcloud auth print-access-token command to insert an access token generated from your user credentials.

    The following example gets details for the specified project. You can use the same pattern for any REST request.

    Before using any of the request data, make the following replacements:

    • PROJECT_ID: Your Google Cloud project ID or name.

    To send your request, choose one of these options:

    curl

    Execute the following command:

    curl -X GET \
    -H "Authorization: Bearer $(gcloud auth print-access-token)" \
    "https://cloudresourcemanager.googleapis.com/v3/projects/PROJECT_ID"

    PowerShell

    Execute the following command:

    $cred = gcloud auth print-access-token
    $headers = @{ "Authorization" = "Bearer $cred" }

    Invoke-WebRequest `
    -Method GET `
    -Headers $headers `
    -Uri "https://cloudresourcemanager.googleapis.com/v3/projects/PROJECT_ID" | Select-Object -Expand Content

    The details for your project are returned.

For APIs that require a quota project, you must set one explicitly for the request. For more information, see Set the quota project with a REST request on this page.

Application Default Credentials

To run the example below, the principal associated with the credentials you provide to ADC needs the resourcemanager.projects.get permission on the project. The resourcemanager.projects.get permission is included in a variety of roles—for example, the Browser role (roles/browser).

  1. Provide credentials to ADC.

    If you are running on a Google Cloud compute resource, you should not provide your user credentials to ADC. Instead, use the attached service account to provide credentials. For more information, see services that support attaching a service account.

  2. Use the gcloud auth application-default print-access-token command to insert the access token returned by ADC into your REST request.

    The following example gets details for the specified project. You can use the same pattern for any REST request.

    Before using any of the request data, make the following replacements:

    • PROJECT_ID: Your Google Cloud project ID or name.

    To send your request, choose one of these options:

    curl

    Execute the following command:

    curl -X GET \
    -H "Authorization: Bearer $(gcloud auth application-default print-access-token)" \
    "https://cloudresourcemanager.googleapis.com/v3/projects/PROJECT_ID"

    PowerShell

    Execute the following command:

    $cred = gcloud auth application-default print-access-token
    $headers = @{ "Authorization" = "Bearer $cred" }

    Invoke-WebRequest `
    -Method GET `
    -Headers $headers `
    -Uri "https://cloudresourcemanager.googleapis.com/v3/projects/PROJECT_ID" | Select-Object -Expand Content

    The details for your project are returned.

    If your request returns an error message about end-user credentials not being supported by this API, see Set the quota project with a REST request on this page.

Impersonated service account

For more information about impersonating a service account, see Use service account impersonation.

  1. Review the required permissions.

    • Your user account must have the iam.serviceAccounts.getAccessToken permission on the impersonated service account (also called the privilege-bearing service account). The iam.serviceAccounts.getAccessToken permission is included in the Service Account Token Creator role (roles/iam.serviceAccountTokenCreator). You need this permission even if you have the Owner role (roles/owner) on the project. For more information, see Setting required permissions.

    • For the example below, the service account you are impersonating must have the resourcemanager.projects.get permission on the project. The resourcemanager.projects.get permission is included in a variety of roles—for example, the Browser role (roles/browser).

  2. Identify or create the privilege-bearing service account—the service account you will impersonate.

    The privilege-bearing service account must have the permissions required to make the API method call.

  3. Use the gcloud auth print-access-token command with the --impersonate-service-account flag to insert an access token for the privilege-bearing service account into your REST request.

    The following example gets details for the specified project. You can use the same pattern for any REST request.

    To run this example, the service account you impersonate needs the resourcemanager.projects.get permission. The resourcemanager.projects.get permission is included in a variety of roles—for example, the Browser role (roles/browser).

    Make the following replacements:

    • PRIV_SA: The email address of the privilege-bearing service account. For example, [email protected].

    • PROJECT_ID: Your Google Cloud project ID or name.

    curl -X GET \
        -H "Authorization: Bearer $(gcloud auth print-access-token --impersonate-service-account=PRIV_SA)" \
        "https://cloudresourcemanager.googleapis.com/v3/projects/PROJECT_ID"
    

Metadata server

To get an access token from the metadata server, you must make the REST call using one of the services that has access to a metadata server:

You use a command-line tool such as curl to get an access token, and then insert it into your REST request.

  1. Query the metadata server for an access token:

    curl "http://metadata.google.internal/computeMetadata/v1/instance/service-accounts/default/token" \
        -H "Metadata-Flavor: Google"
    

    The request returns a response similar to the following example:

    {
          "access_token":"ya29.AHES6ZRN3-HlhAPya30GnW_bHSb_QtAi85nHq39HE3C2LTrCARA",
          "expires_in":3599,
          "token_type":"Bearer"
     }
    
  2. Insert the access token into your REST request, making the following replacements:

    • ACCESS_TOKEN: The access token returned in the previous step.
    • PROJECT_ID: Your Google Cloud project ID or name.
    curl -X GET \
        -H "Authorization: Bearer ACCESS_TOKEN" \
        "https://cloudresourcemanager.googleapis.com/v3/projects/PROJECT_ID"
    

Set the quota project with a REST request

To call some APIs with user credentials, you must also set the project that is billed for your usage and used to track quota. If your API call returns an error message saying that user credentials are not supported, or that the quota project is not set, you must explicitly set the quota project for the request. To set the quota project, include the x-goog-user-project header with your request.

For more information about when you might encounter this issue, see User credentials not working.

You must have the serviceusage.services.use IAM permission for a project to be able to designate it as your billing project. The serviceusage.services.use permission is included in the Service Usage Consumer IAM role. If you don't have the serviceusage.services.use permission for any project, contact your security administrator or a project owner who can give you the Service Usage Consumer role in the project.

The following example uses the Cloud Translation API to translate the word "hello" into Spanish. The Cloud Translation API is an API that needs a quota project to be specified. To run the sample, create a file named request.json with the request body content.

Before using any of the request data, make the following replacements:

  • PROJECT_ID: The ID or name of the Google Cloud project to use as a billing project.

Request JSON body:

{
  "q": "hello",
  "source": "en",
  "target": "es"
}

To send your request, choose one of these options:

curl

Save the request body in a file named request.json, and execute the following command:

curl -X POST \
-H "Authorization: Bearer $(gcloud auth print-access-token)" \
-H "x-goog-user-project: PROJECT_ID" \
-H "Content-Type: application/json; charset=utf-8" \
-d @request.json \
"https://translation.googleapis.com/language/translate/v2"

PowerShell

Save the request body in a file named request.json, and execute the following command:

$cred = gcloud auth print-access-token
$headers = @{ "Authorization" = "Bearer $cred"; "x-goog-user-project" = "PROJECT_ID" }

Invoke-WebRequest `
-Method POST `
-Headers $headers `
-ContentType: "application/json; charset=utf-8" `
-InFile request.json `
-Uri "https://translation.googleapis.com/language/translate/v2" | Select-Object -Expand Content

The translation request succeeds. You can try the command without the x-goog-user-project header to see what happens when you do not specify the billing project.

What's next