The Radio Equipment Regulations 2017

PART 6U.K.Miscellaneous

ReviewE+W+S

76.—(1) The Secretary of State must from time to time—

(a)carry out a review of the regulatory provision contained in these Regulations, and

(b)publish a report setting out the conclusions of the review.

(2) The first report must be published before the end of the period of 5 years beginning with the commencement date.

(3) Subsequent reports must be published at intervals not exceeding 5 years.

(4) Section 30(3) of the Small Business, Enterprise and Employment Act 2015 M1 requires that a review carried out under this regulation must, so far as is reasonable, have regard to how the Directive is implemented in other Member States.

(5) Section 30(4) of the Small Business, Enterprise and Employment Act 2015 requires that a report published under this regulation must, in particular—

(a)set out the objectives intended to be achieved by the regulatory provision referred to in paragraph 1(a),

(b)assess the extent to which those objectives are achieved,

(c)assess whether those objectives remain appropriate, and

(d)if those objectives remain appropriate, assess the extent to which they could be achieved in another way which involves less onerous regulatory provision.

(6) In this regulation, “regulatory provision” has the same meaning as in sections 28 to 32 of the Small Business, Enterprise and Employment Act 2015 (see section 32 of that Act).

ReviewN.I.

76.—(1) The Secretary of State must from time to time—

(a)carry out a review of the regulatory provision contained in these Regulations, and

(b)publish a report setting out the conclusions of the review.

(2) The first report must be published before the end of the period of 5 years beginning with the commencement date.

(3) Subsequent reports must be published at intervals not exceeding 5 years.

(4) Section 30(3) of the Small Business, Enterprise and Employment Act 2015 F6 requires that a review carried out under this regulation must, so far as is reasonable, have regard to how the Directive is implemented in other [F7relevant states].

(5) Section 30(4) of the Small Business, Enterprise and Employment Act 2015 requires that a report published under this regulation must, in particular—

(a)set out the objectives intended to be achieved by the regulatory provision referred to in paragraph 1(a),

(b)assess the extent to which those objectives are achieved,

(c)assess whether those objectives remain appropriate, and

(d)if those objectives remain appropriate, assess the extent to which they could be achieved in another way which involves less onerous regulatory provision.

(6) In this regulation, “regulatory provision” has the same meaning as in sections 28 to 32 of the Small Business, Enterprise and Employment Act 2015 (see section 32 of that Act).

[F1Transitional provision in relation to EU ExitE+W+S

76A.—(1) In this regulation—

“pre-exit period” means the period beginning with the commencement date and ending immediately before IP completion day;

“product” means radio equipment to which these Regulations apply.

(2) Subject to paragraph (3), where a product was made available on the market during the pre-exit period, despite the amendments made by Schedule 29 of the Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019, any obligation to which a person was subject under these Regulations as they had effect immediately before IP completion day, continues to have effect as it did immediately before IP completion day, in relation to that product.

(3) Paragraph (2) does not apply to—

(a)any obligation of any enforcing authority to inform the European Commission or the Member States of any matter; or

(b)any obligation to take action outside of the market in respect of that product.

(4) Where during the pre-exit period—

(a)a product has not been placed on the market; and

(b)a manufacturer has taken any action under regulation 41 as it had effect immediately before IP completion day in relation to that product,

that action has effect as if it had been done under regulation 41 as it has effect on and after IP completion day.

[F2(5) Subject to paragraph (6), where before 11pm on 31st December 2024—

(a)a product has not been placed on the market or put into service; and

(b)a manufacturer has taken any action under the conformity assessment procedure that applies to that product in accordance with Article 17 of the Directive

that action has effect as if it had been done under the applicable conformity assessment procedure referred to in regulation 41.

(6) Paragraph (5) does not apply—

(a)after the expiry of the validity of any certificate issued pursuant to the applicable conformity assessment procedure; and

(b)in any event, after 31st December 2027.]]

Transitional provisionE+W+S

77.  Nothing in these Regulations prevents the making available on the market of radio equipment which—

(a)is in conformity with the requirements of [F3the Radio Equipment and Telecommunications Terminal Equipment Regulations 2000], and

(b)is placed on the market on or before the commencement date.

Transitional provisionN.I.

77.  Nothing in these Regulations prevents the making available on the market of radio equipment which—

(a)is in conformity with the requirements of Directive 1999/5/EC of the European Parliament and the Council on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity F8, and

(b)is placed on the market on or before the commencement date.

Revocations and savingsE+W+S

78.—(1) Subject to paragraph (2), the Radio Equipment and Telecommunications Terminal Equipment Regulations 2000 M2 are revoked.

[F4(2) The Regulations referred to in paragraph (1) continue to apply, as if they had not been revoked, to any equipment placed on the market in accordance with those Regulations before the commencement date, subject to the modifications made in paragraph (2A).]

[F5(2A) The modifications referred to in paragraph (2) are as follows—

(a)references to the Community are to be read as including the United Kingdom;

(b)except where “Member State” first appears in regulation 14 (notified bodies), references to Member State are to be read as including the United Kingdom;

(c)the references to European Union and EEA State in regulation 14 are both to be read as including the United Kingdom;

(d)regulation 18A (duty of enforcement authority to inform Secretary of State of action taken), is to be read without the words “, with a view to this information being passed by her to the Commission.”;

(e)Schedule 5 applies as if paragraph 6 were omitted.]

(3) In relation to radio equipment placed on the market before the commencement date, the amendments in regulations 79 and 80 do not apply.

Revocations and savingsN.I.

78.—(1) Subject to paragraph (2), the Radio Equipment and Telecommunications Terminal Equipment Regulations 2000 F9 are revoked.

(2) The Radio Equipment and Telecommunications Terminal Equipment Regulations 2000 continue to apply to any equipment placed on the market in accordance with those Regulations before the commencement date.

(3) In relation to radio equipment placed on the market before the commencement date, the amendments in regulations 79 and 80 do not apply.

Consequential and other amendmentsU.K.

79.—(1) The Enterprise Act 2002 (Part 9 Restrictions on Disclosure of Information) (Specification) Order 2004 M3 is amended as follows.

(2) In Schedule 1, for “Radio Equipment and Telecommunications Terminal Equipment Regulations 2000” substitute “ Radio Equipment Regulations 2017 ”.

80.—(1) The Consumer Rights Act 2015 M4 is amended as follows.

(2) In paragraph 10 of Schedule 5—

(a)omit the entry “paragraph 1(1)(b) or (2)(b) or 2 of Schedule 9 to the Radio Equipment and Telecommunications Terminal Equipment Regulations 2000 (SI 2000/730)”, and

(b)at the appropriate place insert—

“regulation 56(1)(a)(ii) or (b)(ii) or (2) of the Radio Equipment Regulations 2017 (S.I. 2017/1206)”.

81.—(1) The Electromagnetic Compatibility Regulations 2016 M5 are amended as follows.

(2) In regulation 2 (interpretation)—

(a)in paragraph (1), omit the definition of “notified body”, and

(b)after paragraph (4), insert—

“(5) In these Regulations (except Part 4 (notification of conformity assessment bodies) and Schedules 5 (requirements for notified bodies) and 6 (operational obligations of notified bodies)), “notified body” means—

(a)a notified body within the meaning set out in regulation 43 (notified bodies), or

(b)a notified body under the laws of any other Member State which implements the Directive.”.

(3) In regulation 52 (designation of enforcing authorities) omit paragraph (4).

82.—(1) The Pressure Equipment (Safety) Regulations 2016 M6 are amended as follows.

(2) In regulation 2 (interpretation)—

(a)in paragraph (1)—

(i)for the definition of “authorised representative” substitute—

““authorised representative” means a person established within the EU appointed in accordance with regulation 19(1) (manufacturer's authorised representative);”,

(ii)omit the definition of “notified body”, and

(b)after paragraph (6), insert—

“(7) In these Regulations (except Part 4 (notification of conformity assessment bodies) and Schedules 4 (notified body requirements) and 6 (operational obligations of notified bodies, recognised third party organisations and user inspectorates)), “notified body” means—

(a)a notified body within the meaning set out in regulation 51 (notified bodies), or

(b)a notified body under the laws of any other Member State which implement the Directive.”.

83.—(1) The Simple Pressure Vessels (Safety) Regulations 2016 M7 are amended as follows.

(2) In regulation 2 (interpretation)—

(a)in paragraph (4), omit the definition of “notified body”, and

(b)after paragraph (6), insert—

“(7) In these Regulations (except Part 4 (notification of conformity assessment bodies) and Schedule 4 (notified bodies), “notified body” means—

(a)a notified body within the meaning set out in regulation 45 (notified bodies), or

(b)a notified body under the laws of any other Member State which implements the Directive.”.

84.—(1) The Electrical Equipment (Safety) Regulations 2016 M8 are amended as follows.

(2) In paragraph (1) of regulation 2, for the definition of “authorised representative” substitute—

““authorised representative” means a person established within the EU appointed in accordance with regulation 14 (manufacturer's authorised representatives);”.

(3) In paragraph (3) of regulation 3, for “apparatus covered by the Radio Equipment and Telecommunications Terminal Equipment Regulations 2000” substitute “ equipment covered by the Radio Equipment Regulations 2017 ”.

(4) In regulation 29 (duty to take action in respect of electrical equipment placed on the market which is not considered to be in conformity)—

(a)in the title of the regulation, for “placed” substitute “ made available ”,

(b)in paragraph (1), for “placed” substitute “ made available ”.

85.—(1) The Recreational Craft Regulations 2017 M9 are amended as follows.

(2) In regulation 29 (duty not to place a product on the market where the distributor suspects that it is not in conformity)—

(a)in the title of the regulation, for “place a product” substitute “ make a product available ”,

(b)in paragraph (1), for “place the product” substitute “ make the product available ”.