Search Results (610)

Intelligent voltage stability monitoring remains an essential feature of modern research into secure operations of power system networks. This research developed an adaptive neuro-fuzzy expert system (ANFIS)-based predictive model to validate the viability of two contemporary voltage stability indices (VSIs) for intelligent voltage stability monitoring, especially at intricate loading and operation points close to voltage collapse. The Novel Line Stability Index (NLSI) and Critical Boundary Index are VSIs deployed extensively for steady-state voltage stability analysis, and thus, they are selected for the predictive model implementation. Six essential power system operational parameters with data values calculated at varying real and reactive loading levels are input features for ANFIS model implementation. The model’s performance is evaluated using reliable statistical error performance analysis in percentages ($MAPE$ and $RRMS{E}_p$) and regression analysis based on Pearson’s correlation coefficient (R). The IEEE 14-bus and IEEE 118-bus test systems were used to evaluate the prediction model over various network sizes and complexities and at varying clustering radii. The percentage error analysis reveals that the ANFIS predictive model performed well with both VSIs, with CBI performing comparatively better based on the comparative values of $MAPE$, $RRMS{E}_p$, and R at multiple simulation runs and clustering radii. Remarkably, CBI showed credible potential as a reliable voltage stability indicator that can be adopted for real-time monitoring, particularly at loading levels near the point of voltage instability. Full article

Machine learning and response surface methods for predicting the compressive strength of high-strength concrete have not been adequately compared. Therefore, this research aimed to predict the compressive strength of high-strength concrete (HSC) using different methods. To achieve this purpose, neuro-fuzzy inference systems (ANFISs), artificial neural networks (ANNs), and response surface methodology (RSM) were used as ensemble methods. Using an ANN and ANFIS, high-strength concrete (HSC) output was modeled and optimized as a function of five independent variables. The RSM was designed with three input variables: cement, and fine and coarse aggregate. To facilitate data entry into Design Expert, the RSM model was divided into six groups, with p-values of responses 1 to 6 of 0.027, 0.010, 0.003, 0.023, 0.002, and 0.026. The following metrics were used to evaluate model compressive strength projection: R, R², and MSE for ANN and ANFIS modeling; R², Adj. R², and Pred. R² for RSM modeling. Based on the data, it can be concluded that the ANN model (R = 0.999, R² = 0.998, and MSE = 0.417), RSM model (R = 0.981 and R² = 0.963), and ANFIS model (R = 0.962, R² = 0.926, and MSE = 0.655) have a good chance of accurately predicting the compressive strength of high-strength concrete (HSC). Furthermore, there is a strong correlation between the ANN, RSM, and ANFIS models and the experimental data. Nevertheless, the artificial neural network model demonstrates exceptional accuracy. The sensitivity analysis of the ANN model shows that cement and fine aggregate have the most significant effect on predicting compressive strength (45.29% and 35.87%, respectively), while superplasticizer has the least effect (0.227%). RSME values for cement and fine aggregate in the ANFIS model were 0.313 and 0.453 during the test process and 0.733 and 0.563 during the training process. Thus, it was found that both ANN and RSM models presented better results with higher accuracy and can be used for predicting the compressive strength of construction materials. Full article

This article uses machine learning techniques as fuzzy and neuro-fuzzy ANFISs, to develop and compare prediction models capable of relating pregnant women’s exposure to air pollutants, such as Nitrogen Dioxide and Particulate Matter, the mother’s age, and the number of prenatal consultations to the incidence of premature birth. In the current literature, studies can be found that relate prematurity to the exposure of pregnant women to NO₂, O₃, and PM₁₀; to Toluene and benzene, mainly in the window 5 to 10 days before birth; and to PM₁₀ in the week before birth. Both models used logistic regression to quantify the effects of pollutants as a result of premature birth. Datasets from Brazil—Departamento de Informatica do Sistema Único de Saúde (DATASUS) and Companhia Ambiental do Estado de São Paulo (CETESB)—were used, covering the period from 2016 to 2018 and comprising women living in the city of São José dos Campos (SP), Brazil. In order to evaluate and compare the different techniques used, evaluation metrics were calculated, such as correlation (r), coefficient of determination (R²), Root Mean Square Error (RMSE), Mean Absolute Percentage Error (MAPE), Mean Square Error (MSE), and Mean Absolute Error (MAE). These metrics are widely used in the literature due to their ability to evaluate the robustness and efficiency of prediction models. For the RMSE, MAPE, MSE, and MAE metrics, lower values indicate that prediction errors are smaller, demonstrating better model accuracy and confidence. In the case of (r) and R², a positive and strong result indicates alignment and better performance between the real and predicted data. The neuro-fuzzy ANFIS model showed superior performance, with a correlation (r) of 0.59, R² = 0.35, RMSE = 2.83, MAPE = 5.35%, MSE = 8.00, and MAE = 1.70, while the fuzzy model returned results of r = 0.20, R² = 0.04, RMSE = 3.29, MSE = 10.81, MAPE = 6.67%, and MAE = 2.01. Therefore, the results from the ANFIS neuro-fuzzy system indicate greater prediction capacity and precision in relation to the fuzzy system. This superiority can be explained by integration with neural networks, allowing data learning and, consequently, more efficient modeling. In addition, the findings obtained in this study have potential for the formulation of public health policies aimed at reducing the number of premature births and promoting improvements in maternal and neonatal health. Full article

Petroleum drilling sludge (PDS) is one of the most significant waste products generated during drilling activities worldwide. The disposal of this waste must be carried out using the most cost-effective methods available. The objective of this manuscript is to mathematically model the parameters of drying processes experimentally applied to PDS. For this purpose, this study employed two different artificial intelligence techniques: artificial neural networks (ANNs) and adaptive neuro-fuzzy inference systems (ANFISs). These methods were used to predict the parameters. In the calculations, the inputs included petroleum drilling mud with varying quantities (50 g, 100 g, and 150 g) and drying times, using a 120 W microwave drying power. The results indicated that the coefficient of determination (R²) and the root mean square error (RMSE) obtained during the test phase for ANFIS were 0.999965 and 0.005425, respectively, while for ANN, the R² and RMSE were 0.999973 and 0.004774, respectively. Analysis of the evaluation results revealed that both methods provided predictions for moisture content that were closer to experimental values compared to drying rate values. Full article

The four basic language skills, listening, speaking, reading, and writing play, a crucial role in the development of an individual’s skills in other disciplines. The current study aims to underpin the relationship between language skills and mathematics skills by focusing on the language and mathematics curricula of two consistently high-achieving countries, Hong Kong and Singapore, in the Program for International Student Assessment (PISA) rankings. In the current study, the convergent parallel mixed method was utilized that qualitative and quantitative data were composed together. Primarily, the outcomes of four language skills were determined in the native language teaching curricula of the two countries. The topics and themes related to four basic language skills were determined from the two mathematics curricula. The curricula were examined by document analysis from qualitative research methods. The analysis was conducted by examining the native language teaching and the mathematics curricula of both countries by the content analysis method. Later, the findings of the document analysis were used to develop machine learning models to find a possible positive relationship between language skills and the PISA scores. Although a number of previous studies have found a reasonable relationship between language skills and mathematics skills, the current study results were contradictory to the ones performed previously in the literature, and considering the curricula no positive relationship between the language and mathematics skills was found. The findings of the current study were further supported by the artificial neural network (ANN) and Adaptive Neuro Fuzzy Inference System (ANFIS) model performance metrics. Compared to an acceptable level of 0.80, significantly low R² values of 0.35 and 0.39 for the ANN and ANFIS models, respectively, indicated very little relationship between the language and mathematics skills. Full article

Meteorological drought, defined as a decrease in the average amount of precipitation, is among the most insidious natural disasters. Not knowing when a drought will occur (its onset) makes it difficult to predict and monitor it. Scientists face significant challenges in accurately predicting and monitoring global droughts, despite using various machine learning techniques and drought indices developed in recent years. Optimization methods and hybrid models are being developed to overcome these challenges and create effective drought policies. In this study, drought analysis was conducted using The Standard Precipitation Index (SPI) with monthly precipitation data from 1920 to 2022 in the Tromsø region. Models with different input structures were created using the obtained SPI values. These models were then analyzed with The Adaptive Neuro-Fuzzy Inference System (ANFIS) by means of different optimization methods: The Particle Swarm Optimization (PSO), The Genetic Algorithm (GA), The Grey Wolf Optimization (GWO), and The Artificial Bee Colony (ABC), and PSO optimization of Support Vector Machine (SVM-PSO). Correlation coefficient (r), Root Mean Square Error (RMSE), Nash–Sutcliffe efficiency (NSE), and RMSE-Standard Deviation Ratio (RSR) served as performance evaluation criteria. The results of this study demonstrated that, while successful results were obtained in all commonly used algorithms except for ANFIS-GWO, the best performance values obtained using SPI12 input data were achieved with ANFIS-ABC-M04, exhibiting r: 0.9516, NSE: 0.9054, and RMSE: 0.3108. Full article

This work presents the use of three-dimensional machine learning approaches, namely the response surface methodology (RSM), the artificial neural network (ANN), and the adaptive neuro-fuzzy inference system (ANFIS), to optimise and model the biodiesel yield from waste margarine oil. The effect of the process parameters methanol-to-oil ratio (3–15 mole), catalyst ratio (0.3–1.5 wt. %), reaction time (30–90 min), and reaction temperature (30–70 °C) were studied. The performance metric results for the RSM, ANN, and ANFIS were 0.991, 996, and 0.998 for regression (R²); 0.924, 0.566, and 0.324 for root mean square error (RMSE); 0.568, 0.267, and 0.202 for mean absolute error (MAE); 0.746, 0.333, and 0.226 for mean absolute percentage error (MAPE); 0.008, 0.004, and 0.003 for average relative error (ARE); and 4.503, 2.114, and 1.828 for mean percentage standard deviation (MPSD). The developed three-dimensional machine learning approach—the RSM, ANN, and ANFIS models—is a potential method for optimising and modelling biodiesel yield. The study results may be used to create sustainable, efficient, and economical solutions for recycling waste margarine oil. Full article

This work uses three machine learning techniques, response surface methodology (RSM), artificial neural network (ANN), and adaptive neuro-fuzzy inference system (ANFIS) to optimise and model biodiesel production from waste cooking oil using process parameters such as methanol-to-oil ratio, catalyst loading, reaction temperature, and reaction time. RSM was used for process optimisation. Model construction of the ANN model used 70% of the data for training, 15% for testing, and 15% for validation. The network was trained using feed-forward propagation and the Levenberg–Marquardt algorithm. The ANFIS was generated using a grid partition and trained using a hybrid method. The effectiveness of the machine learning was assessed through error metrics such as regression (R²), root mean square error (RMSE), mean absolute error (MAE), mean absolute percentage error (MAPE) and average relative error (ARE). The optimum yield was obtained at 15 wt.%, 4 wt.%, 120 °C, and 4 h, methanol-to-oil ratio, catalyst loading, temperature, and reaction time, respectively, yielding 93.486%. Full article

This paper presents a novel approach to predicting specific monitoring timeframes for Permanent Pacemaker Implantation (PPMI) requirements following a Transcatheter Aortic Valve Replacement (TAVR). The method combines Quantum Ant Colony Optimization (QACO) with the Adaptive Neuro-Fuzzy Inference System (ANFIS) and incorporates expert knowledge. Although this forecast is more precise, it requires a larger number of predictors to achieve this level of accuracy. Our model deploys expert-derived insights to guarantee the clinical relevance and interpretability of the predicted outcomes. Additionally, we employ quantum computing techniques to address this complex and high-dimensional problem. Through extensive assessments, we show that our quantum-enhanced model outperforms traditional methods with notable improvement in evaluation metrics, such as accuracy, precision, recall, and F1 score. Furthermore, with the integration of eXplainable AI (XAI) methods, our solution enhances the transparency and reliability of medical predictive models, hence promoting improved clinical practice decision-making. The findings highlight how quantum computing has the potential to completely transform predictive analytics in the medical field, especially when it comes to improving patient care after TAVR. Full article

Autonomous navigation in dynamic environments is a significant challenge in robotics. The primary goals are to ensure smooth and safe movement. This study introduces a control strategy based on an Adaptive Neuro-Fuzzy Inference System (ANFIS). It enhances autonomous robot navigation in dynamic environments with a focus on collision-free path planning. The strategy uses a path-planning technique to develop a trajectory that allows the robot to navigate smoothly while avoiding both static and dynamic obstacles. The developed control system incorporates four ANFIS controllers: two are tasked with guiding the robot toward its end point, and the other two are activated for obstacle avoidance. The experimental setup conducted in CoppeliaSim involves a mobile robot equipped with ultrasonic sensors navigating in an environment with static and dynamic obstacles. Simulation experiments are conducted to demonstrate the model’s capability in ensuring collision-free navigation, employing a path-planning algorithm to ascertain the shortest route to the target destination. The simulation results highlight the superiority of the ANFIS-based approach over conventional methods, particularly in terms of computational efficiency and navigational smoothness. Full article

A modified onboard neuro-fuzzy adaptive (NFA) helicopter turboshaft engine (HTE) automatic control system (ACS) is proposed, which is based on a circuit consisting of a research object, a regulator, an emulator, a compensator, and an observer unit. In this scheme, it is proposed to use the proposed AFNN six-layer hybrid neuro-fuzzy network (NFN) with Sugeno fuzzy inference and a Gaussian membership function for fuzzy variables, which makes it possible to reduce the HTE fuel consumption parameter transient process regulation time by 15.0 times compared with the use of a traditional system automatic control (clear control), 17.5 times compared with the use of a fuzzy ACS (fuzzy control), and 11.25 times compared with the use of a neuro-fuzzy reconfigured ACS based on an ANFIS five-layer hybrid NFN. By applying the Lyapunov method as a criterion, its system stability is proven at any time, with the exception of the initial time, since at the initial time the system is in an equilibrium state. The use of the six-layer ANFF NFN made it possible to reduce the I and II types of error in the HTE fuel consumption controlling task by 1.36…2.06 times compared with the five-layer ANFIS NFN. This work also proposes an AFNN six-layer hybrid NFN training algorithm, which, due to adaptive elements, allows one to change its parameters and settings in real time based on changing conditions or external influences and, as a result, achieve an accuracy of up to 99.98% in the HTE fuel consumption controlling task and reduce losses to 0.2%. Full article

Artificial Intelligence (AI) methods, including Artificial Neural Networks (ANNs), Adaptive Neuro-Fuzzy Inference Systems (ANFISs), Support Vector Machines (SVMs), Deep Learning (DL), Genetic Programming (GP) and Hybrid Algorithms, have proven to be important tools for accurate groundwater level (GWL) modelling. Through an analysis of the results obtained in numerous articles published in high-impact journals during 2001–2023, this comprehensive review examines each method’s capabilities, their combinations, and critical considerations about selecting appropriate input parameters, using optimisation algorithms, and considering the natural physical conditions of the territories under investigation to improve the models’ accuracy. For example, ANN takes advantage of its ability to recognise complex patterns and non-linear relationships between input and output variables. In addition, ANFIS shows potential in processing diverse environmental data and offers higher accuracy than alternative methods such as ANN, SVM, and GP. SVM excels at efficiently modelling complex relationships and heterogeneous data. Meanwhile, DL methods, such as Long Short-Term Memory (LSTM) and Convolutional Neural Networks (CNNs), are crucial in improving prediction accuracy at different temporal and spatial scales. GP methods have also shown promise in modelling complex and nonlinear relationships in groundwater data, providing more accurate and reliable predictions when combined with optimisation techniques and uncertainty analysis. Therefore, integrating these methods and optimisation techniques (Hybrid Algorithms), tailored to specific hydrological and hydrogeological conditions, can significantly increase the predictive capability of GWL models and improve the planning and management of water resources. These findings emphasise the importance of thoroughly understanding (a priori) the functionalities and capabilities of each potentially beneficial AI-based methodology, along with the knowledge of the physical characteristics of the territory under investigation, to optimise GWL predictive models. Full article

Nowadays, in parallel with the rapid increase in industrialization and human population, a significant increase in all types of waste, especially domestic, industrial, and agricultural waste, can be observed. In this study, microwave drying, one of the disposal methods for agricultural waste, such as prina and hazelnut shell, was performed. To reduce the time, energy, and cost spent on drying processes, two recently prominent machine learning prediction methods (Artificial Neural Network (ANN) and Adaptive Neuro-Fuzzy Inference System (ANFIS)) were applied. In this study, our aim is to model the disposal of waste using artificial intelligence techniques, especially considering the importance of environmental pollution in today’s context. Microwave power values of 120, 350, and 460 W were used for 100 g of hazelnut shell, and 90 W, 360 W, and 600 W were used for 7 mm thickness of prina. Both ANN and ANFIS approaches were applied to a dataset obtained from the calculation of moisture content and drying rate values. It was observed that the ANFIS and ANN models were applicable for predicting moisture levels, but not applicable for predicting drying rates. When the coefficient of determination (R²), Root Mean Square Error (RMSE) and Mean Absolute Percentage Error (MAPE) values for moisture level are examined both for ANN and ANFIS models’ predictions, it is seen that the R² value is between 0.981340 and 0.999999, the RMSE value is between 0.000012 and 0.015010 and the MAPE value is between 0.034268 and 23.833481. Full article

Predicting the mechanical properties of Additive Manufacturing (AM) parts is a complex task due to the intricate nature of the manufacturing processes. This study presents a novel application of the Adaptive Neuro-Fuzzy Inference System (ANFIS) to predict the mechanical properties of PLA specimens produced using Fused Filament Fabrication (FFF). The ANFIS model integrates the strengths of neural networks and fuzzy logic to establish a mapping between the inputs and the output mechanical properties, specifically maximum stress, strain, and Young’s modulus. Experimental data were collected from three-point bending tests conducted on FFF samples fabricated from PLA material with different manufacturing parameters, such as infill pattern, infill, layer thickness, printing speed, extruder and bed temperature, printing orientation (along each axis and twist angle), and raster angle. These data were used to train, check, and validate the ANFIS model. The results reveal that the proposed predictive model can effectively predict the mechanical properties of FFF-printed PLA samples, demonstrating its potential for broader applications across various AM technologies and materials, ultimately enhancing the efficiency and effectiveness of the AM fabrication process. Full article

This study investigated the impact of blockchain-driven supply chain analytics on the dimensions of lean, agile, resilient, green, and sustainable (LARGS) supply chain management, as well as supply chain innovation (SCI) and sustainable supply chain performance (SSCP). The research involved 262 managers and vice presidents of supply chains from large- and medium-sized manufacturing companies listed in the Tehran Stock Exchange. A hybrid approach utilizing structural equations modelling with partial least squares-structural equation modeling (PLS-SEM) and the adaptive neuro-fuzzy inference systems (ANFIS) technique was employed for data analysis. The findings demonstrated a significantly positive effect of blockchain-driven supply chain analytics on SCI, the LARGS supply chain, and SSCP. Additionally, SCI exhibited a significantly positive impact on the LARGS supply chain and SSCP. Moreover, the LARGS supply chain was shown to have a significantly positive influence on SSCP. Both SCI and the LARGS supply chain played positive and significant mediating roles in the impact of blockchain-driven supply chain analytics on SSCP. Furthermore, the LARGS supply chain also acted as a significant mediator in the effect of SCI on SSCP. Lastly, SCI had a positive and significant mediating role in the impact of blockchain-driven supply chain analytics on the LARGS supply chain. In conclusion, it can be inferred that blockchain-driven supply chain analytics contributes to the enhancement of SSCP through the facilitation of SCI and the promotion of LARGS supply chain principles. Full article